@article {46821,
	title = {Electrospun nanofibers of Tin phosphide (SnP0.94) nanoparticles encapsulated in a carbon matrix: a tunable conversion-cum-alloying lithium storage anode},
	journal = {Energy \& Fuels},
	volume = {34},
	year = {2020},
	month = {JUN},
	pages = {7648-7657},
	type = {Article; Proceedings Paper},
	abstract = {<p>Anodes with improved Li storage capability are required for next-generation lithium batteries. In this work we report a convenient synthesis strategy, based on electrospinning followed by reduction and phosphorization, to prepare a tin phosphide (SnP0.94) phase in a carbon nanofiber matrix. The layered structure offered by the SnP0.94 phase, along with its small size (5-20 nm) encapsulated in the conducting carbon matrix, leads to promising electrochemical Li storage characteristics. This composite has a capacity of 750 mAh g(-1) at 100 mA g(-1) with good cycling and rate stability. Electrochemical studies revealed a faster diffusion coefficient (1.86 x 10(-11) cm(2) s(-1)) for Li in the composite compared to the bare SnP0.94 (8.57 x 10(-14) cm(2) s(-1)), confirming the promise of this class of materials for cation storage in battery anodes.</p>
},
	issn = {0887-0624},
	doi = {10.1021/acs.energyfuels.0c01046},
	author = {Yadav, Poonam and Malik, Wahid and Dwivedi, Pravin Kumari and Jones, Lathe A. and Shelke, Manjusha V.}
}
@article {48208,
	title = {Sustainable composite of SnFe2O4 conversion alloying anode for lithium-ion storage},
	journal = {Sustainable Energy \& Fuels},
	volume = {6},
	year = {2022},
	month = {AUG },
	pages = {3806-3817},
	type = {Article},
	abstract = {<p>
	The development of high-performance, low-cost electrodes using sustainable materials for Li-ion batteries is of vital importance in view of their increasing demand for use in electronics and electric vehicles, as we transition from non-renewable energy resources. Challenges associated with commercial graphite anode materials include relatively low capacity, the use of high-temperature synthesis, Li dendrite formation, and limited rate capability. In this study, we present a tin ferrite SnFe2O4 (SFO) conversion alloying material (CAM), and its synergistic composite with a scalable and low-cost waste-derived carbon (WDC), which was prepared by low-temperature pyrolysis of a waste material sustainably. The combination of SFO with the WDC in the composite boosts the conductivity, diffusion kinetics, stability, and reversibility, and accommodates volume expansion upon cycling. The first charge capacity obtained for WDC, SFO, and SFO-WDC is 595, 1269, and 1331 mA h g(-1), respectively at 100 mA g(-1) in a Li-ion half-cell. In a full cell fabricated with LFP, a stable capacity of 80 mA h g(-1) at 100 mA g(-1) could be obtained, and the corresponding energy density for the SFO-WDCIILFP full cell is 300 W h kg(-1). Kinetic studies revealed that capacitance-controlled charge storage is dominant so the capacity was higher in the composite. This composite system addresses both the low capacity issue of the carbon anode and stability issues of CAMs while being compatible for use with current Li-ion battery technology.</p>
},
	issn = {2398-4902},
	doi = {10.1039/d2se00919f},
	author = {Yadav, Poonam and Parte, Golu and Malik, Wahid and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha}
}
