@article {46799,
	title = {Electrochemical performance of pre-lithiated ZnMoO4 and r-GO@ZnMoO4 composite anode for lithium-ion battery application},
	journal = {Journal of the Taiwan Institute of Chemical Engineers},
	volume = {112},
	year = {2020},
	month = {JUL},
	pages = {60-66},
	type = {Article},
	abstract = {<p>Exploring a safer replacement of Li metal anode is crucial for technological, and fundamental importance. Li-metal is a preferred choice as anode material for lithium-ion battery (LIB) applications. However, parasitic dendritic growth on the Li metal surface during cycling causes instability and safety dreads. In the present study, we have investigated that the pre-lithiated ZnMoO4 is superior to its carbon-based counterparts (r-GO@ZnMoO4), moreover safer and sustainable than Li metal anode. The pre-lithiated ZnMoO4 delivers a better reversible capacity (similar to 1000 mAhg(-1) at 0.1 Ag-1), superior rate capability (similar to 400 mAh g(-1) at 2 Ag-1), and excellent cycling stability over 300 cycles at 0.1 Ag-1, as compared to bare ZnMoO4 and r-GO@ZnMoO4 composite. The present investigation is an attempt to provide a substitute for commonly used Li-metal/carbon anodes with better performance. (C) 2020 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.</p>
},
	keywords = {Cycling stability, Electrochemistry, Li-ion battery, Nyquist plot, Rate performance, ZnMoO4 nanocomposites},
	issn = {1876-1070},
	doi = {10.1016/j.jtice.2020.07.009},
	author = {Bin Masood, Khalid and Parte, Golu and Jain, Neha and Dwivedi, Pravin K. and Kumar, Pushpendra and Shelke, V, Manjusha and Patel, Rp and Singh, Jai}
}
@article {49852,
	title = {Exploring FeSe2 and porous carbon composite as a cost-effective host for Al3+ in aqueous Aluminum ion batteries},
	journal = {Electrochimica Acta},
	volume = {537},
	year = {2025},
	month = {OCT },
	pages = {146823},
	type = {Article},
	abstract = {<p>
	Aluminum is a high-energy-density material with low cost, making rechargeable aluminum ion batteries (AIBs) a attractive alternative to alkali metal ion batteries. However, the practical development of aqueous AIBs is hindered by limited electrode. Herein, we report FeSe2-decorated porous nitrogen and sulfur-doped carbon spheres (FSPNSCS) as a cathode material for aqueous AIBs, with an emphasis on the reaction kinetics and electrochemical performance. FSPNSCS is synthesized through a hydrothermal approach, confirmed by comprehensive characterizations using X-ray Diffraction for crystalline structure validation and Scanning Electron Microscopy for analyzing composite morphology. Electrochemical properties and kinetics are probed using cyclic voltammetry and galvanostatic charge-discharge tests. Ex-situ XRD reveals a notable peak shift towards higher 2 theta values during discharge, indicating lattice contraction due to Al3+ insertion. Sulfur and nitrogen doping impart elasticity to the lattice structure, enhancing stability during cycling. Ex-situ XPS confirms Al3+ storage and minimal oxide formation, as further supported by microscopic elemental mapping with HRTEM. The FSPNSCS cathode achieves a reversible capacity of 60 mAh g- 1 at a current density of 200 mA g- 1. The system exhibits outstanding cycling stability, retaining over 90 \% of its capacity at 500 mA g- 1 over 1000 cycles, highlighting its potential to advance aqueous AIBs for sustainable energy storage.</p>
},
	keywords = {Aqueous aluminum ion battery, cathode material, Electrochemistry, Transition metal selenide},
	issn = {0013-4686},
	doi = {10.1016/j.electacta.2025.146823},
	author = {Mirzapure, Vinay and Patrike, Apurva and Shelke, V, Manjusha}
}
