@article {48181,
	title = {Tuning the hybridization and charge polarization in metal nanoparticles dispersed over Schiff base functionalized SBA-15 enhances CO2 capture and conversion to formic acid},
	journal = {Journal of Materials Chemistry A},
	volume = {10},
	year = {2022},
	month = {SEP},
	pages = {18354-18362},
	type = {Article},
	abstract = {<p>
	Different Schiff base functionalized SBA-15 materials were synthesized through condensation reactions between 3-aminopropyltriethoxysilane (APTES) and different aldehydes (glutaraldehyde and butyraldehyde) over a mesoporous silica, SBA-15 (APTES-GLU/SBA-15 and APTES-BUT/SBA-15). Both static and dynamic experiments have been used for testing the CO2 capture efficiency of these materials. The hybridization of the N atom in APTES has been tuned from sp(3) to sp(2) upon condensation facilitating optimum CO2 capture in the direct synthesis of APTES-GLU/SBA-15. The undesirable oxides of nitrogen have been removed during the synthesis process to improve the CO2 capture efficiency. These materials were employed as supports for Pd-Ag and Pd-Ni bimetallic systems for the selective conversion of the captured CO2 to formic acid (FA) in 0.5 M KHCO3 solution. The Pd-Ni catalyst system exhibited enhanced CO2 to FA conversion activity compared to other heterogeneous systems, which is similar to 4 times better than that of the Pd-Ag system in this study. The X-ray absorption studies over the catalyst material confirmed that the relatively electron-deficient Ni in Pd-Ni compared to Ag in Pd-Ag favoured higher charge polarization between the metals in the Pd-Ni system enhancing the CO2 to FA conversion. The experimental observations are well supported by the DFT calculations.</p>
},
	issn = {2050-7488},
	doi = {10.1039/d2ta03690h},
	author = {Cherevotan, Arjun and Ray, Bitan and Yadav, Anish and Bagchi, Debabrata and Singh, Ashutosh Kumar and Riyaz, Mohd and Churipard, Sathyapal R. and Naral, Vinay and Kaur, Komalpreet and Gautam, Ujjal K. and Vinod, Chathakudath P. and Peter, Sebastian C.}
}
@article {49967,
	title = {Towards improved activity and stability in RWGS reaction: Dispersed copper in mesoporous alumina matrix as a strategy for enhanced performance},
	journal = {Chemical Engineering Journal},
	volume = {525},
	year = {2025},
	month = {DEC },
	pages = {169863},
	type = {Article},
	abstract = {<p>
	The development of highly performing Cu-based catalysts with high dispersion of Cu species in nanocrystalline form on a suitable oxide support is significant in reverse water gas shift (RWGS) reaction. We report a simple and robust one-pot sol-gel synthesis of mesoporous Al10-xCuxOy (m gamma-Al10-xCux-SG) catalysts with Cu species in a highly dispersed nanocrystalline form in the gamma-Al2O3 matrix and its high catalytic performance in RWGS reaction. The lack of long range structural order of copper species in m gamma-Al10-xCux-SG catalysts evidenced from Cu-K edge extended X-ray absorption fine structure (EXAFS) studies illustrates the fine distribution of copper species in mesoporous gamma-Al2O3 lattice. Activity study revealed that m gamma-Al10-xCux-SG catalysts showed significantly high CO2 conversion to CO and excellent catalytic stability compared to gamma-Al10-xCux-I prepared by conventional impregnation method. Mesoporous Al9Cu1 (m gamma-Al9Cu1) displayed a CO2 conversion of 45 \% at 500 degrees C, which is about 2.8 times higher activity than conventional gamma-Al9Cu1-I catalyst with almost same Cu loading as that of m gamma-Al9Cu1 catalyst. Stability study at 500 degrees C over a period of 50 h revealed that m gamma-Al10-xCux-SG catalysts at low Cu loading (m gamma-Al9.9Cu0.1) showed excellent catalytic stability. The strong copper-alumina interaction in m gamma-Al10-xCux-SG catalysts with enhanced number of active sites at the copper-alumina interface as evidenced from field emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), H2-temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS), electrochemical characterization, and Cu-K edge EXAFS analysis enhances the activity and stability of the catalyst. Density functional theory (DFT) studies and the Operando DRIFTS-MS analysis of RWGS over m gamma-Al9Cu1 catalyst revealed that the mechanism of RWGS reaction to CO formation on m gamma-Al10-xCux-SG catalysts is preceded through the formation of a hydroxycarbonyl (OCOH) intermediate. The present synthesis strategy provides an opportunity for producing Cu-based catalysts with further enhanced activity and stability in RWGS reaction by suitable modification of the catalyst.</p>
},
	issn = {1385-8947},
	doi = {10.1016/j.cej.2025.169863},
	author = {Saju, Simi and Rajendran, Sivaraj and Oztas, Ulviye and Ruiz, Sergio Carrasco and Reina, Tomas Ramirez and Ghosh, Biplab and Sree, Sreeprasanth Pulinthanathu and Meena, Raghavendra and Li, Guanna and Bobadilla, Luis F. and Vinod, Chathakudath P. and Mathew, Thomas and Shiju, N. Raveendran}
}
