@article {46876, title = {Cu-Ni bimetal integrated TiO2 thin film for enhanced solar hydrogen generation}, journal = {Solar RRL}, volume = {4}, year = {2020}, month = {MAY}, pages = {1900557}, type = {Article}, abstract = {

A series of non-noble Cu-Ni bimetallic catalysts is prepared with different molar proportions of metals. Of these bimetallic catalysts, 1 wt\% is subsequently integrated with titania P25. The catalysts are evaluated for solar hydrogen generation under 1 sun condition in both the powder and thin film forms. All the photocatalysts in the thin film exhibit an 8-24 times higher hydrogen yield (HY) compared with the corresponding particulate counterpart. The highest HY (41.7 mmol h(-1) g(-1)) is demonstrated for the photocatalyst Cu-Ni/TiO2 (CNT; 1:1 = Cu:Ni) in the thin film form, which is 24 times higher than that with its powder counterpart (1.75 mmol h(-1) g(-1)) and exceeds the performance of other Cu-Ni/TiO2 compositions. This enhanced activity in the thin film can be ascribed to improved absorption of visible light and an effective separation of photogenerated charge carriers at the interface of Cu-Ni/TiO2 leading to better charge carrier utilization.

}, keywords = {bimetals, energy conversion, Hydrogen, Photocatalysis, solar energy}, issn = {2367-198X}, doi = {10.1002/solr.201900557}, author = {Tudu, Bijoy and Nalajala, Naresh and Saikia, Pranjal and Gopinath, Chinnakonda S.} } @article {48273, title = {Selective and generic photocatalytic oxidation of alcohol with Pd-TiO2 thin films: butanols to butanal/butanone with different morphologies of Pd and 0.5 theta(Pt)-Pd counterparts}, journal = {Chemistry-An Asian Journal}, volume = {18}, year = {2023}, month = {MAR}, type = {Article}, abstract = {

The present study reports on the photocatalytic oxidation of butanols to butanal/butanone using thin film form of facet-dependent nano-Pd supported on commercial TiO2 under one-sun condition and demonstrates the generic nature. Pd-nanocube (Pd-NC(100)), Pd-truncated octahedron (Pd-TO (100) and (111)), polycrystalline (Pd-PC), and their counterparts with half-a-monolayer Pt-coated on Pd (0.5 theta(Pt)-Pd)) have been used as co-catalyst. A potentially scalable thin film form of Pd/TiO2 photocatalyst, prepared by drop-casting method, has been employed to study oxidation of n-butanol, 2-butanol, and iso-butanol to corresponding aldehyde/ketone. 100\% selectivity is demonstrated to respective aldehyde/ketone with any catalyst used in the present study with varying degree of butanols conversion by NMR. 0.5 theta(Pt)-Pd-TO/TiO2 shows the highest conversion of 2-butanol to butanone (13.6\% in 4 h). Continuous 10 h of reaction with the most active 0.5 theta(Pt)-Pd-TO/P25 catalyst demonstrates 31\% conversion of 2-butanol to butanone, and catalyst recyclability has been demonstrated. The present protocol can be scalable to large scales to maximize the conversion in direct sunlight. Due to its generic nature, the current method can also be applied to many other alcohols and substrate molecules.

}, keywords = {energy conversion, Nanomaterials, Oxidation, Photocatalysis, Sustainability}, issn = {1861-4728}, doi = {10.1002/asia.202201239}, author = {Salgaonkar, Kranti N. and Kale, Sandip R. and Nalajala, Naresh and Mansuri, Sayana and Gopinath, Chinnakonda S.} } @article {49801, title = {Potential tuneable glucose oxidation to selective C6 molecules and CC cleavage, and parallel green H2 production: sustainable high current density electrolysis}, journal = {Chemical Engineering Journal}, volume = {529}, year = {2026}, month = {FEB}, pages = {172633}, type = {Article}, abstract = {

Current study elucidates the electrocatalytic efficacy of palladium-nanocubes (Pd-NCs) for the selective oxidation of glucose to value-added chemicals with concomitant hydrogen evolution. The Pd-NC catalyst demonstrated exceptional activity and product selectivity, achieving nearly quantitative glucose conversion (\>99 \%) with high gluconic and glucaric acid yield at low anodic overpotential (0.6 V vs. RHE) in alkaline electrolyte. At not-so-high elevated potentials (1.2 V vs. RHE), oxidative CC scission prevails, yielding shorter-chain carboxylates along with C6-acids. Reaction products are thoroughly characterized and quantitatively estimated by NMR spectral methods; NMR methods also provide CC cleavage and mechanistic pathways of glucose to various products. Complementary DFT calculations delineate the thermodynamic favorability of glucose adsorption on Pd-NC surfaces (-1.83 eV) and the exergonic oxidation pathway under applied bias, corroborating experimental product distributions. In a two-electrode electrolyzer, Pd-NC anode paired with Pt/C and Ni2P cathode demonstrates 100 mA/cm(2) at 0.99 V and 1.37 V, respectively, with 48 \% reduction in energy input (26.6 kWh/kg H-2) compared to conventional alkaline electrolysis; critically, H-2 production energy is lower than the usable energy (33.3 kWh/kg H-2). Sustainable chronopotentiometric assays confirm sustainability (similar to 140 h) in alkaline as well as saline electrolytes, underscoring the system{\textquoteright}s resilience against chloride-mediated corrosion. Present work establishes a proof of concept for integrated biomass-component valorization and carbon-negative green hydrogen production, merging atomic-level mechanistic insights with scalable reactor design. Optimization of reaction parameters, including potential tuning, reaction temperature and electrolyte engineering, offers a compelling strategy to further enhance C6 and fragmented product selectivity and overall system efficiency.

}, keywords = {biomass valorization, electrocatalysis, energy conversion, Sustainability}, issn = {1385-8947}, doi = {10.1016/j.cej.2026.172633}, author = {Chauhan, Inderjeet and Patra, Kshirodra Kumar and Vijay, Pothoppurathu M. and Nalajala, Naresh and Mehta, Shweta and Joshi, Kavita and Ravindranathan, Sapna and Gopinath, Chinnakonda S.} }