@article {44616,
	title = {Flexible composite mechanical energy harvester from a ferroelectric organoamino phosphonium salt},
	journal = {Angewandte Chemie-International Edition},
	volume = {57},
	year = {2018},
	month = {JUL},
	pages = {9054-9058},
	abstract = {<p>A new binary organic salt diphenyl diisopropylamino phosphonium hexaflurophosphate (DPDPPF6) was shown to exhibit a good ferroelectric response and employed for mechanical energy harvesting application. The phosphonium salt crystallizes in the monoclinic noncentrosymmetric space group Cc and exhibits an H-bonded 1D chain structure due to N-HF interactions. Ferroelectric measurements on the single crystals of DPDPPF6 gave a well-saturated rectangular hysteresis loop with a remnant (P-r) polarization value of 6Ccm(-2). Further, composite devices based on polydimethylsiloxane (PDMS) films for various weight percentages (3, 5, 7, 10 and 20wt\%) of DPDPPF6 were prepared and examined for power generation by using an impact test setup. A maximum output peak-to-peak voltage (V-PP) of 8.5V and an output peak-to-peak current (I-PP) of 0.5A was obtained for the non-poled composite film with 10wt\% of DPDPPF6. These results show the efficacy of organic ferroelectric substances as potential micropower generators.</p>},
	keywords = {binary phosphonium salts, energy conversion, ferroelectricity, hydrogen bonding, polymer composites},
	issn = {1433-7851},
	doi = {10.1002/anie.201805479},
	author = {Vijayakanth, Thangavel and Srivastava, Anant Kumar and Ram, Farsa and Kulkarni, Priyangi and Shanmuganathan, Kadhiravan and Praveenkumar, Balu and Boomishankar, Ramamoorthy}
}
@article {44652,
	title = {Fluorinated nanocellulose-reinforced all-organic flexible ferroelectric nanocomposites for energy generation},
	journal = {Journal of Physical Chemistry C},
	volume = {122},
	year = {2018},
	month = {JUL},
	pages = {16540-16549},
	abstract = {<p>We report here enhanced ferroelectric crystal formation and energy generation properties of polyvinylidene fluoride (PVDF) in the presence of surface-modified crystalline nanocellulose. Incorporation of only 2-5 wt \% fluorinated nanocellulose (FNC) in PVDF has been found to significantly induce polar beta/gamma-phase crystallization as compared to the addition of unmodified nanocellulose (carboxylated nanocellulose). A device made up of electrically poled PVDF/FNC composite films yielded 2 orders of magnitude higher voltage output than neat PVDF in vibrational energy harvesting. This remarkable increase in energy generation properties of PVDF at such a low loading of an organic natural biopolymer could be attributed to the tailored surface chemistry of nanocellulose, facilitating strong interfacial interactions between PVDF and FNC. Interestingly, energy harvesting devices fabricated from PVDF/FNC nanocomposites charged a 4.7 mu F capacitor at significantly faster rate and the accumulated voltage on capacitor was 3.8 times greater than neat PVDF. The fact that PVDF/FNC nanocomposites still retain a strain at break of 10-15\% and can charge a capacitor in few seconds suggests potential use of these nanocomposites as flexible energy harvesting materials at large strain conditions.</p>},
	issn = {1932-7447},
	doi = {10.1021/acs.jpcc.8b03470},
	author = {Ram, Farsa and Ambone, Tushar and Sharma, Aakash and Murugesan, Rajarathinam and Kajale, Deepak and Borkar, Vivek and Ali, Shaikh Faruque and Balu, Praveen Kumar and Kumaraswamy, Guruswamy and Shanmuganathan, Kadhiravan}
}
@article {44345,
	title = { Functionalized carbon nanotube reinforced polymer nanocomposite microcapsules with enhanced stiffness},
	journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects},
	volume = {550},
	year = {2018},
	month = {AUG},
	pages = {82-89},
	type = {Article},
	abstract = {Microcapsules with tunable mechanical properties are highly desirable in pressure sensitive applications. We report here a facile approach to prepare polyurea/multiwall carbon nanotube (MWCNTs) nanocomposite microcapsules (MICs) with enhanced stiffness. A model compound dimethyl phthalate (DMP) was used as core material. MWCNTs were modified with reactive functional groups namely carboxyl (-COOH), amines (-NH2), and isocyanates (-NCO) to ensure a stronger interface between polymer wall and MWCNTs. Functionalization of MWCNTs was corroborated by Fourier transformed infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) was employed to study the surface morphology of MICs. The presence of MWCNTs in the microcapsule wall was confirmed by transmission electron microscopy (TEM). MICs with functionalized MWCNTs show almost 100\% increase in stiffness with respect to pristine capsules. All MICs show 92-97 +/- 1\% encapsulation efficiency. The approach used in this paper can be broadly utilized to tune the mechanical properties of the microcapsules.},
	doi = {10.1016/j.colsurfa.2018.04.028},
	author = {Jagtap, Siddheshwar B. and Patil, Vishal D. and Suresh, Karthika and Ram, Farsa and Mohan, Muthu Subramanian and Rajput, Shatruhan S. and Patil, Shivprasad and Shukla, Parshuram G. and Shanmuganathan, Kadhiravan}
}
