@article { ISI:000239869200024, title = {Low temperature hydrogenation of tetralin over supported rhodium catalysts in supercritical carbon dioxide solvent}, journal = {Applied Catalysis A-General}, volume = {310}, year = {2006}, month = {AUG}, pages = {194-198}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydrogenation of tetralin was studied over supported rhodium catalysts in supercritical carbon dioxide solvent at 333 K. The results were compared with those in an organic solvent and under neat conditions. Higher cis-decalin yield was obtained in supercritical carbon dioxide solvent than under non-supercritical conditions. It was observed that higher hydrogen concentration at the surface in supercritical carbon dioxide solvent led to fast direct hydrogenation of tetralin to cis-decalin; the flipping of the intermediate, octalin, to give trans-decalin could be prevented. (C) 2006 Elsevier B.V. All rights reserved.

}, keywords = {cis-decalin, Hydrogen storage, Hydrogenation, Supercritical carbon dioxide, supported rhodium catalysts, tetralin}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.05.040}, author = {Hiyoshi, Norihito and Mine, Eiichi and Rode, Chandrashekhar V. and Sato, Osamu and Shirai, Masayuki} } @article { ISI:000304401600015, title = {Surface species of supported ruthenium catalysts in selective hydrogenation of levulinic esters for bio-refinery application}, journal = {Catalysis Letters}, volume = {142}, number = {6}, year = {2012}, month = {JUN}, pages = {779-787}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Several supported noble metal catalysts were screened for the hydrogenation of methyl levulinate to gamma-valerolactone (GVL). Among these catalysts 5 \% Ru/C showed the highest conversion of 95 \% of methyl levulinate with 91 \% selectivity to GVL. A detailed characterization was carried out using TPR, XRD, XPS and BET techniques. XPS studies revealed that higher extent of Ru-0 species in case of carbon supported Ru was responsible for its higher hydrogenation activity as compared to Ru on other supports. Effect of process parameters such as temperature, H-2 pressure, catalyst and substrate concentration and metal loading on methyl LA conversion and selectivity to GVL also has been studied. 5 \% Ru/C catalyst was found to be stable up to five reuses.

}, keywords = {5 \% Ru/C, Biofeedstock, gamma-Valerolactone, H-2-TPR, Hydrogenation, Methyl levulinate, XPS}, issn = {1011-372X}, doi = {10.1007/s10562-012-0822-4}, author = {Hengne, Amol M. and Biradar, Narayan S. and Rode, Chandrashekhar V.} } @article { ISI:000330812400022, title = {Single-pot formation of THFAL via catalytic hydrogenation of FFR over Pd/MFI catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {2}, number = {2}, year = {2014}, month = {FEB}, pages = {272-281}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Furfural (FFR) was selectively hydrogenated in a single pot to tetrahydrofurfuryl alcohol (THFAL) over a Si MFI molecular sieve supported Pd catalyst. Studies on catalyst screening revealed that both the metal function and the support were critical for directing the selectivity to the ringhydrogenated product, THFAL. The structural feature of MFI as shown by XRD was completely retained in the used sample of the 3\% Pd/MFI catalyst confirming its stability under reaction conditions. XRD, along with SEM characterization of the used samples, established retention of morphology of the structured silicate, suggesting a strong interaction between hexagonal porous silicate and Pd particles. The complete conversion of FFR with an enhanced selectivity of 95\% to THFAL could be achieved by recycling the crude of the first hydrogenation experiment over the same 3\% Pd/MFI catalyst.

}, keywords = {Biomass conversion, Hydrogenation, Pd/MFI, Recyclability, THFAL}, issn = {2168-0485}, doi = {10.1021/sc400302b}, author = {Biradar, Narayan S. and Hengne, Amol M. and Birajdar, Shobha N. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Rode, Chandrashekhar V.} } @article {46738, title = {One pot hydrogenation of furfural to 2-methyl tetrahydrofuran over supported mono- and Bi-metallic catalysts}, journal = {ChemistrySelect}, volume = {5}, year = {2020}, month = {AUG }, pages = {9590-9600}, type = {Article}, abstract = {

2-Methyltetrahydrofuran is a valuable commercial product that can be obtained by direct hydrogenation of furfural. In the present study, among several carbon supported bimetallic Ir-Ni catalysts with different loadings screened, 4\% Ir-4\% Ni/C catalyst showed excellent activity in terms of direct conversion (99\%) to 2-MeTHF with a maximum selectivity of similar to 74\% at 220 degrees C and 750 psig, suppressing the formation of side chain as well as ring opening products. The catalytic activity was found to be mainly affected by catalyst preparation methods, metal loadings, surface composition, temperature, pressure and catalyst loading. HR-TEM and STEM revealed well dispersed Ir-Ni NPs having the particle sizes in the range of 2 to 5 nm. Different phases of Ir i. e. Ir degrees and IrO(2)as well as oxygen vacancies were found to be responsible for hydrogenation of furfural to 2-methyl furan while, Ni degrees and NiO were responsible for further hydrogenation to 2-MeTHF. The synergic effect between Ir and Ni was established through XPS, H-2-TPR analysis. With the help of some control experiments, the plausible reaction pathway was also proposed. The catalyst prepared by co-impregnation method found more effective than prepared by sequential addition method. At lower Ni loadings of 1\% and 2\%, low temperature of 160 degrees C as well as at low H(2)pressure of 250 psig, mixture of furfuryl alcohol and 2-methyl furan were formed selectively. Catalyst could be successfully reused up to 3 times without leaching of metals.

}, keywords = {2-Methyltetrahydrofuran, Bimetallic catalyst, furfural, Hydrogenation, OER type mechanism}, issn = {2365-6549}, doi = {10.1002/slct.202002322}, author = {Date, Nandan S. and Hengne, Amol M. and Huang, K. -W. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} }