@article {43891, title = {Intensification of extraction of curcumin from Curcuma amada using ultrasound assisted approach: Effect of different operating parameters}, journal = {Ultrasonic Sonochemistry}, volume = {38}, year = {2017}, month = {SEP}, chapter = {437-445}, abstract = {

Curcumin, a dietary phytochemical, has been extracted from rhizomes of Curcuma amada using ultrasound assisted extraction (UAE) and the results compared with the conventional extraction approach to establish the process intensification benefits. The effect of operating parameters such as type of solvent, extraction time, extraction temperature, solid to solvent ratio, particle size and ultrasonic power on the extraction yield have been investigated in details for the approach UAE. The maximum extraction yield as 72\% was obtained in 1 h under optimized conditions of 35 degrees C temperature, solid to solvent ratio of 1:25, particle size of 0.09 mm, ultrasonic power of 250 W and ultrasound frequency of 22 kHz with ethanol as the solvent. The obtained yield was significantly higher as compared to the batch extraction where only about 62\% yield was achieved in 8 h of treatment. Peleg{\textquoteright}s model was used to describe the kinetics of UAE and the model showed a good agreement with the experimental results. Overall, ultrasound has been established to be a green process for extraction of curcumin with benefits of reduction in time as compared to batch extraction and the operating temperature as compared to Soxhlet extraction.

}, keywords = {Acrylamide, Cavitation, Curcumin Extraction, Design, Enhancement, Functionalized Silica, kinetics, Microwave, Nanoparticles, Natural-products, Optimization, Phenolic-compounds, Process Intensification, Solid-liquid Extraction, Ultrasound}, issn = {1350-4177}, doi = {10.1016/j.ultsonch.2017.03.040}, author = {Shirsath, S. R. and Sable, S. S. and Gaikwad, S. G. and Sonawane, S. H. and Saini, D. R. and Gogate, P. R.} } @inbook {45814, title = {Kinetic model for extraction of betulinic acid by batch extraction from leaves of syzygium cumini (Jamun)}, booktitle = {Novel Water treatment and separation methods: simulation of chemical processew}, year = {2017}, pages = {179-190}, publisher = {Apple Academic Press}, organization = {Apple Academic Press}, chapter = {Kinetic model for extraction of betulinic acid by batch extraction from leaves of syzygium cumini (Jamun)}, abstract = {

Plants are one of the most important sources of medicines. Syzygium cumini known as {\textquotedblleft}jamun{\textquotedblright} in Hindi which is found in throughout India. The leaves are having promising therapeutic value with its various phyto constituents such as tannin, alkaloids, flavonoids, terpenoids, fatty acid, phenol, minerals, carbohydrates, and vitamins. All these phyto constituents are analyzed by qualitative analysis method. Betulinic acid is a naturally occurring pentacyclic triterpenoid compound. The medicinal application of betulinic acid is available for diabetes, cancer cell, and HIV. Betulinic acid shows more solubility for methanol. For extraction of betulinic acid, different extraction techniques like batch extraction and Soxhlet extraction techniques are used. The effect of various parameters like particle size, agitations speed, temperature, and solid loading is studied. To explain the extraction of biological material from plant sources different model equations are used which describes sorption isotherms of material. The experimental data of solid loading and temperature are best fitted by using second order Peleg{\textquoteright}s model. From this model the linearized Arrhenius equation was obtained and temperature dependency was 0.567 kJ/mol. The aim of this study is to find out the best kinetic model for extraction and experimental data shows the good agreement of betulinic acid with methanol which justifies batch extraction process.

}, doi = {10.1201/9781315225395}, author = {Admane, S. V. and Gaikwad, S. G. and Chavan, S. M.} } @inbook {45780, title = {Microwave-assisted extraction of carvone from carum carvi}, booktitle = {Novel water treatment and separation methods simulation of chemical processes}, year = {2017}, pages = {356}, publisher = {CRC Press}, organization = {CRC Press}, edition = {1 }, chapter = {Microwave-assisted extraction of carvone from carum carvi}, address = {New York}, abstract = {

Due to increasing demand for potable and irrigation water, new scientific research is being conducted to deal with wastewater from a variety of sources. Novel Water Treatment and Separation Methods: Simulation of Chemical Processes presents a selection of research related to applications of chemical processes for wastewater treatment, separation techniques, and modeling and simulation of chemical processes. Among the many topics are: degradation of herbicide removal of anionic dye efficient sun-light driven photocatalysis removal of copper and iron using green activated carbon defluoridation of drinking water removal of calcium and magnesium from wastewater using ion exchange resins degradation of vegetable oil refinery wastewater novel separation techniques, including microwave-assisted extraction and more The volume presents selected examples in wastewater treatment, highlighting some recent examples of processes such as photocatalytic degradation, emulsion liquid membrane, novel photocatalyst for degradation of various pollutants, and adsorption of heavy metals. The book goes on to explore some novel separation techniques, such as microwave-assisted extraction, anhydrous ethanol through molecular sieve dehydration, batch extraction from leaves of Syzygium cumini (known as jambul, jambolan, jamblang or jamun), and reactive extraction. These novel separation techniques have proved be advantageous over conventional methods. The volume also looks at modeling and simulation of chemical processes, including chapters on flow characteristics of novel solid-liquid multistage circulating fluidized bed, mathematical modeling and simulation of gasketed plate heat exchangers, optimization of the adsorption capacity of prepared activated carbon, and modeling of ethanol/water separation by pervaporation, along with topics on simulation using CHEMCAD software.

}, isbn = {978-177188578-2}, issn = {978-1771885782}, doi = {10.1201/9781315225395}, author = {Borole, O. D. and Shirsath, S. R. and Gaikwad, S. G.} } @article {44016, title = {New insight into sugarcane industry waste utilization (press mud) for cleaner biobutanol production by using c. acetobutylicum nrrl b-527}, journal = {Applied Biochemistry and Biotechnology}, year = {2017}, month = {MAY}, chapter = {1-18}, abstract = {

In the present study, press mud, a sugar industry waste, was explored for biobutanol production to strengthen agricultural economy. The fermentative production of biobutanol was investigated via series of steps, viz. characterization, drying, acid hydrolysis, detoxification, and fermentation. Press mud contains an adequate amount of cellulose (22.3\%) and hemicellulose (21.67\%) on dry basis, and hence, it can be utilized for further acetone-butanol-ethanol (ABE) production. Drying experiments were conducted in the temperature range of 60{\textendash}120 {\textdegree}C to circumvent microbial spoilage and enhance storability of press mud. Furthermore, acidic pretreatment variables, viz. sulfuric acid concentration, solid to liquid ratio, and time, were optimized using response surface methodology. The corresponding values were found to be 1.5\% (v/v), 1:5 g/mL, and 15 min, respectively. In addition, detoxification studies were also conducted using activated charcoal, which removed almost 93{\textendash}97\% phenolics and around 98\% furans, which are toxic to microorganisms during fermentation. Finally, the batch fermentation of detoxified press mud slurry (the sample dried at 100 {\textdegree}C and pretreated) using Clostridium acetobutylicum NRRL B-527 resulted in a higher butanol production of 4.43 g/L with a total ABE of 6.69 g/L. {\textcopyright} 2017 Springer Science+Business Media New York Author keywords

}, keywords = {Acetone, Acetone butanol ethanols, Acidic pre treatments, Agriculture, Biobutanol, cellulose, Clostridium acetobutylicum, Detoxification, Drying, Drying Fermentation, FermentationSpoilage, Fermentative production, Pre-treatment, Press mud, Press mud Pretreatment, Response surface methodology, Sugar industry, Sulfur determination}, issn = {0273-2289}, doi = {10.1007/s12010-017-2479-3}, author = {Nimbalkar, Pranhita R. and Khedkar, Manisha A. and Gaikwad, S. G. and Chavan, Pramod V. and Bankar, Sandip B.} }