@article {46799, title = {Electrochemical performance of pre-lithiated ZnMoO4 and r-GO@ZnMoO4 composite anode for lithium-ion battery application}, journal = {Journal of the Taiwan Institute of Chemical Engineers}, volume = {112}, year = {2020}, month = {JUL}, pages = {60-66}, type = {Article}, abstract = {

Exploring a safer replacement of Li metal anode is crucial for technological, and fundamental importance. Li-metal is a preferred choice as anode material for lithium-ion battery (LIB) applications. However, parasitic dendritic growth on the Li metal surface during cycling causes instability and safety dreads. In the present study, we have investigated that the pre-lithiated ZnMoO4 is superior to its carbon-based counterparts (r-GO@ZnMoO4), moreover safer and sustainable than Li metal anode. The pre-lithiated ZnMoO4 delivers a better reversible capacity (similar to 1000 mAhg(-1) at 0.1 Ag-1), superior rate capability (similar to 400 mAh g(-1) at 2 Ag-1), and excellent cycling stability over 300 cycles at 0.1 Ag-1, as compared to bare ZnMoO4 and r-GO@ZnMoO4 composite. The present investigation is an attempt to provide a substitute for commonly used Li-metal/carbon anodes with better performance. (C) 2020 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

}, keywords = {Cycling stability, Electrochemistry, Li-ion battery, Nyquist plot, Rate performance, ZnMoO4 nanocomposites}, issn = {1876-1070}, doi = {10.1016/j.jtice.2020.07.009}, author = {Bin Masood, Khalid and Parte, Golu and Jain, Neha and Dwivedi, Pravin K. and Kumar, Pushpendra and Shelke, V, Manjusha and Patel, Rp and Singh, Jai} } @article {46801, title = {Experimental and theoretical investigations of the effect of heteroatom-doped carbon microsphere supports on the stability and storage capacity of nano-Co3O4 conversion anodes for application in lithium-ion batteries}, journal = {Nanoscale Advances}, volume = {2}, year = {2020}, month = {JUL }, pages = {2914-2924}, type = {Article}, abstract = {

Conversion-type anode materials have been intensely studied for application in Li-ion batteries (LIBs) due to their potentially higher capacities than current graphite-based anodes. This work reports the development of a high-capacity and stable anode from a nanocomposite of N and S co-doped carbon spheres (NSCSs) with Co3O4 (NSCS-Co3O4). A hydrothermal reaction of saccharose withl-cysteine was carried out, followed by its carbonization. CSs when used as supports for conversion-type materials provide efficient electron/ion transfer channels, enhancing the overall electrochemical performance of the electrodes. Additionally, the heteroatoms doped in a carbon matrix alter the electronic properties, often increasing the reactivity of the carbon surface, and they are reported to be effective for anchoring metal oxide nanoparticles. Consequently, the NSCS-Co3O4 nanocomposites developed in this work exhibit enhanced and stable reversible specific capacity over several cycles. Stable cycling behavior was observed at 1 A g(-1)with 1285 mA h g(-1) of specific capacity retained after 350 cycles along with more than 99\% of coulombic efficiency. This material shows excellent rate capability with a specific capacity of 745 mA h g(-1) retained even at a high current density of 5 A g(-1). Detailed DFT-based calculations revealed the role of doped supports in controlling the volume expansion upon lithiation.

}, issn = {2516-0230}, doi = {10.1039/dOna00261e}, author = {Dwivedi, Pravin K. and Nair, Aathira and Mehare, Rupali S. and Chaturvedi, Vikash and Joshi, Kavita and Shelke, V, Manjusha} } @article {48988, title = {Evaluation of Fe3O4 incorporated functionalized carbon nanotube self-standing buckypaper as electrodes for solid-state symmetric supercapacitor}, journal = {Journal of Energy Storage }, volume = {73}, year = {2023}, month = {DEC }, pages = {109-101}, type = {Article}, abstract = {

Iron (II, III) oxide and carbonaceous materials drawn considerable attention in energy storage owing to their special features. In this study, simple reverse co-precipitation, acid functionalization and vacuum filtration methods adopted to synthesis Fe3O4 nanoparticles of size 11 nm and -COOH acid functionalized multi-wall carbon nanotubes (FMWCNT). And further used them to prepare and optimize Fe3O4 in FMWCNT as 15 wt\% and 25 wt\% self-standing buckypapers of around 30-mu m thickness as electrodes for solid-state symmetric capacitor in the form of coin cell. The results show that 15 wt\% and 25 wt\% of Fe3O4-FMWCNT buckypapers hybrid nanostructures have Fe3O4 nanoparticles successfully incorporated in FMWCNT. The 25 wt\% Fe3O4-FMWCNT electrodes with charge transfer resistance of 140 Ohm showed high areal specific capacitance (Cs) 78.5 mF/cm2 and retained 80 \% of its Cs until 800 cycles even at high current density of 1 mA/cm2, scan rate of 100 mV/s whereas 15 wt\% Fe3O4-FMWCNT showed low Cs of 47 mF/cm2 and retained 80 \% of its Cs over 5000 cycles whereas only FMWCNT show Cs is 36 mF/cm2 with 54 Ohm. Finally, a solid-state symmetric supercapacitor coin cell with self-standing 25 wt\% Fe3O4-FMWCNT buckypaper showed an excellent power density of 129.5 mW cm-3 and energy density of 3.6 mWh cm-3 is the innovation of the current work. This is mainly attributed to the combined effect of pseudocapacitive behavior from Fe3O4 by faradaic reaction with additional charge transfer resistance and electric double layer (EDLC) behavior from FMWCNTs by non-faradaic of electronic, ionic transport during charging-discharging. As-made solid-state symmetric supercapacitor appears as a high-performance storage device without extra support of current collectors for practical applications and for fabri-cation of planar capacitors.

}, keywords = {Buckypaper, Power density, specific capacitance, Symmetric supercapacitor}, issn = {2352-152X}, doi = {10.1016/j.est.2023.109101}, author = {Bhaviripudi, Vijayabhaskara Rao and Dwivedi, Pravin K. and Pabba, Durga Prasad and Aepuru, Radhamanohar and Nakate, Umesh T. and Espinoza-Gonzalez, Rodrigo and Shelke, V, Manjusha} }