@article {45934, title = {Fluorescent cadmium telluride quantum dots embedded chitosan nanoparticles: a stable, biocompatible preparation for bio-imaging}, journal = {Journal of Biomaterials Science-Polymer Edition}, volume = {26}, year = {2015}, month = {JAN }, pages = {42-56}, type = {Article}, abstract = {

Fluorescent cadmium telluride quantum dots (CdTe QDs) are an optically attractive option for bioimaging, but are known to display high cytotoxicity. Nanoparticles synthesized from chitosan, a natural biopolymer of beta 1-4 linked glucosamine, display good biocompatibility and cellular uptake. A facile, green synthetic strategy has been developed to embed green fluorescent cadmium telluride quantum dots (CdTe QDs) in biocompatible CNPs to obtain a safer preparation than {\textquoteleft}as is{\textquoteright} QDs. High-resolution transmission electron microscopy showed the crystal lattice corresponding to CdTe QDs embedded in CNPs while thermogravimetry confirmed their polymeric composition. Electrostatic interactions between thiol-capped QDs (4nm, -57mV) and CNPs (\~300nm, +38mV) generated CdTe QDs-embedded CNPs that were stable up to three months. Further, viability of NIH3T3 mouse fibroblast cells in vitro increased in presence of QDs-embedded CNPs as compared to bare QDs. At the highest concentration (10 mu g/ml), the former shows 34 and 39\% increase in viability at 24 and 48h, respectively, as compared to the latter. This shows that chitosan nanoparticles do not release the QDs up to 48h and do not cause extended toxicity. Furthermore, hydrolytic enzymes such as lysozyme and chitinase did not degrade chitosan nanoparticles. Moreover, QDs-embedded CNPs show enhanced internalization in NIH3T3 cells as compared to bare QDs. This method offers ease of synthesis and handling of stable, luminescent, biocompatible CdTe QDs-embedded CNPs with a favorable toxicity profile and better cellular uptake with potential for bioimaging and targeted detection of cellular components.

}, keywords = {Biocompatible, bioimaging, CdTe quantum dots, chitosan nanoparticles, Toxicity}, issn = {0920-5063}, doi = {10.1080/09205063.2014.982240}, author = {Ghormade, Vandana and Gholap, Haribhau and Kale, Sonia and Kulkarni, Vaishnavi and Bhat, Suresh and Paknikar, Kishore} } @article {45828, title = {Synthesis and characterization of novel polymer-hybrid silver nanoparticles and its biomedical study}, journal = {Materials Today: Proceedings}, volume = {3}, year = {2016}, month = {JUN}, pages = {1949-1957}, type = {Article}, abstract = {

Hybrid polymer metal nanoparticles have advantages over conventional metal nanoparticles with respect to their stability, chemical resistance, antibacterial activity and drug delivery properties. In the current work, we have synthesized novel stimuli-responsive polymer hybrid silver nanoparticles using green synthesis method, where the plant extract is used as a reducing agent in the synthesis. Encapsulating metal nanoparticles with stimuli-responsive soft-polymeric system is novel and provides additional versatility whose functions and properties can be tailored by controlling any of the stimuli such as pH, temperature, ionic strength with respect to their antibacterial activity and physiological condition. Moreover, green synthesis methods have advantages over conventional methods involving chemical reducing agents that are often associated with environmental toxicity because of their enhanced antibacterial and other biological effects. The synthesized hybrid particles were characterized using Dynamic light scattering, UV-Visible spectroscopy and Small angle x-ray scattering. Further, we have investigated the antibacterial and cytotoxicity effect of these hybrid particles against different bacterial cells ( Salmonella) and mammalian cell lines (HCT116) respectively. These results are discussed in the light of previous studied work and these results suggest that our synthesized polymer hybrid nanoparticles are more antibacterial and less cytotoxic than the usual silver nanoparticles. (C) 2015Elsevier Ltd.All rights reserved.

}, keywords = {Antibacterial effect, Cytotoxicity, Polymeric hybrid particless, silver nanoparticles}, doi = {10.1016/j.matpr.2016.04.096}, author = {Verma, Suresh Kumar and Jha, Ealisha and Kiran, K. J. and Bhat, Suresh and Suar, Mrutyunjay and Mohanty, P. S.} } @article {43823, title = {Low-dimensional hybrid perovskites as high performance anodes for alkali-ion batteries}, journal = {Journal of Materials Chemistry A}, volume = {5}, year = {2017}, month = {SEP}, chapter = {18634-18642}, abstract = {

State-of-the-art Li (or Na) ion batteries work by insertion/extraction of the alkali metal ions into a porous electrode material, where the overall capacity is strongly dependent on the accessibility of the host material interior to the ions. On the other hand, the performance stability depends on various factors governed by the specific constitution of the electrode. Here we show that molecularly engineered low-dimensional hybrid perovskites can work as excellent anode materials for alkali-ion batteries. We measure a high reversible capacity of 646 mA h g(-1) at 100 mA g(-1) with good stability tested up to 250 cycles for the benzidine mediated lead iodide based 1D system. An ex situ analysis of the electrodes reveals that the storage primarily occurs via the Li-x(or Na-x)Pb alloying/de-alloying process. We anticipate that these results open a new direction for the use of low-dimensional hybrid perovskites for energy storage applications.

}, keywords = {Generation, Inorganic-Organic Hybrid, Lead Iodide, lithiation-intramolecular electrophilic reaction, Na-Air Battery, Negative Electrodes, Organometal Halide perovskites, PB, Sequential Deposition, Solar-cells}, issn = {2050-7488}, doi = {10.1039/c7ta04529h}, author = {Tathavadekar, Mukta and Krishnamurthy, Shrreya and Banerjee, Aparna and Nagane, Satyawan and Gawli, Yogesh and Suryawanshi, Anil and Bhat, Suresh and Puthusseri, Dhanya and Mohite, Aditya D. and Ogale, Satishchandra} } @article {46006, title = {Mapping fusogenicity of ciprofloxacin-loaded liposomes with bacterial cells}, journal = {AAPS Pharmscitech}, volume = {20}, year = {2019}, month = {JUL}, pages = {180}, type = {Article}, abstract = {

The process of liposome fusion with cellular membrane plays key role in delivering encapsulated drug molecule into the cell. This process becomes very important for molecules having low permeability as they fail to reach the site of action located inside the cell. Ciprofloxacin (CIP), a broad-spectrum BCS class IV antibiotic, has poor permeability. In the present work, CIP-loaded liposomes were prepared using solvent evaporation method and optimized by 3(2) factorial design approach. The optimized batch of CIP-loaded liposomes was characterized for size, entrapment efficiency, zeta potential, FTIR, and microbial susceptibility study on Staphylococcus aureus (gram-positive bacteria) and Escherichia coli (gram-negative bacteria). Confocal microscopy was used to study the fusogenicity process of CIP-loaded liposomes with bacterial cells. Additionally, the kinetics of fusogenicity process was studied using SAXS for the first time. Surprisingly, the rate of fusion of CIP-loaded liposomes with cell wall of S. aureus was twice when compared to the cell wall of E. coli. It is believed that the current work can act as a roadmap in selection of proper excipients while developing formulations which would expedite the fusogenicity and may execute pharmacological activity of poorly penetrable drug molecules at lower dose.

}, keywords = {ciprofloxacin, confocal microscopy, fusion, liposomes, SAXS}, issn = {1530-9932}, doi = {10.1208/s12249-019-1381-4}, author = {Patil, Runali and Torris, Arun and Bhat, Suresh and Patil, Sharvil} } @article {46319, title = {Role of particle morphology in the yielding behavior of dense thermosensitive microgel suspensions}, journal = {Journal of Applied Polymer Science}, year = {2019}, month = {OCT}, pages = {48625}, type = {Article; Early Access}, abstract = {

The yielding behavior of dense thermosensitive microgel suspensions of poly(N-isopropylacrylamide) with two different particle morphologies viz core-shell (CS) morphology and particles with uniform crosslink density were studied. Structural properties were examined using dynamic light scattering and yielding behavior was investigated by nonlinear oscillatory rheology. Suspensions of particles with uniform crosslinking density showed a typical hard sphere like behavior with the loss modulus (G {\textquoteleft}{\textquoteright}) exhibiting a single peak due to cage breaking while CS type particles shows a double yielding at different ranges of strain similar to that seen in attractive colloidal glasses. The first yielding process in CS microgels is interpreted as due to the disentanglement of the overlapped polymer chains from the shells of the neighboring microgels and the second yielding process due to the breakage of cages formed by neighboring microgel particles. Current study suggests that the interpenetration of polymer chains at high concentrations sets in an attractive like potential leading to double yielding phenomena in an otherwise purely repulsive system. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48625.

}, issn = {0021-8995}, doi = {10.1002/app.48625}, author = {Jathavedan, Kiran Kaithakkal and Kanheerampockil, Fayis and Bhat, Suresh} } @article {46919, title = {Enteric pH responsive cargo release from PDA and PEG coated mesoporous silica nanoparticles: a comparative study in Drosophila melanogaster}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {MAR }, pages = {11716-11726}, type = {Article}, abstract = {

Physiological stimulus-specific cargo release from nanoparticle carriers is a holy grail of drug delivery research. While the majority of such work is carried out in vitro with cell lines, widespread use of common mammalian model systems - mice and rats - is difficult due to the associated cost and regulatory restrictions. Here we use the inexpensive, easily reared, excellent genetic model system Drosophila melanogaster to test pH responsive cargo release from widely used mesoporous silica nanoparticles (MSNs) coated with pH sensitive polydopamine (PDA) and polyethylene glycol (PEG) polymers. We synthesized 650 +/- 75 nm diameter PDA or PEG coated mesoporous silica nanoparticles loaded with a fluorescent dye and fed to individual adult flies. Subsequently, the passage of the particles were monitored through the fly gut. As in mammals, the fly intestine has multiple pH specific zones that are easily accessible for imaging and also genetic, biochemical or physiological manipulations. We observed that both the species of MSNs ruptured around the acidic (pH \< 4.0) middle midgut of the flies. PEG coated particles showed sharper specificity of release in the acidic middle midgut of flies than the PDA coated ones and had less tendency to clump together. Our results clearly show that the Drosophila gut can be used as a model to test pH responsive biocompatible materials in vivo. Our work paves the way for greater use of Drosophila as an in vivo complete systemic model in drug delivery and smart materials research. It also suggests that such specific delivery of chemical/biological cargo can be exploited to study basic biology of the gut cells and their communication with other organs.

}, doi = {10.1039/c9ra11019d}, author = {Sapre, Nidhi and Chakraborty, Rusha and Purohit, Poorvi and Bhat, Suresh and Das, Gaurav and Bajpe, Sneha R.} } @article {47782, title = {Resveratrol loaded cubic phase nanoparticles with enhanced oral bioavailability}, journal = {BioNanoScience}, volume = {11}, year = {2021}, month = {DEC}, pages = {1108 - 1118}, type = {Article}, abstract = {Resveratrol (RES), a naturally occurring hydrophobic polyphenolic compound, has shown potential anticancer activity. However, due to low aqueous solubility and extensive first pass metabolism (primarily by cytochrome enzymes), it shows poor oral bioavailability. In the present work, novel RES loaded cubosomes of glycerol monooleate (GMO) and Gelucire 44/14 (GL44) (RES-Cubs) were prepared. RES-Cubs were prepared by emulsion evaporation technique and optimized using 32 factorial design. The optimized RES-Cubs were assessed for particle size, zeta potential, entrapment efficiency, FTIR, TEM, SAXS, in vitro resveratrol release and oral bioavailability. RES-Cubs showed an average particle size of 121.7 {\textpm} 2.54~nm with adequate entrapment efficiency of about 82.0 {\textpm} 2.35\% w/w. The analysis of SAXS profile of RES-Cubs revealed Pn3m crystallographic space group containing diamond cubic phase. In vitro RES release profile of RES-Cubs exhibited markedly sustained release of resveratrol. Furthermore, RES-Cubs demonstrated considerable enhancement in oral bioavailability (ninefold) of resveratrol as compared to RES alone. The developed RES loaded cubosomes bearing cytochrome enzyme inhibitor property can act as promising nanocarrier in the delivery of lipophilic drugs with a drawback of in vivo degradation by cytochrome enzymes.}, isbn = {2191-1649}, doi = {10.1007/s12668-021-00892-9}, url = {https://doi.org/10.1007/s12668-021-00892-9}, author = {Rawat, Neeraj Kumar and Torris, Arun and Bhat, Suresh and Mahadik, Kakasaheb and Patil, Sharvil} } @article {47831, title = {Rigidity dictates spontaneous helix formation of thermoresponsive colloidal chains in poor solvent}, journal = {ACS Nano}, volume = {15}, year = {2021}, month = {DEC}, pages = {19702-19711}, type = {Article}, abstract = {The formation of helical motifs typically requires specific directional interactions. Here, we demonstrate that isotropic interparticle attraction can drive self-assembly of colloidal chains into thermo-reversible helices, for chains with a critical level of backbone rigidity. We prepare thermoresponsive colloidal chains by cross-linking PNIPAM microgel-coated polystyrene colloids ({\textquotedblleft}monomers{\textquotedblright}), aligned in an AC electric field. We control the chain rigidity by varying cross-linking time. Above the LCST of PNIPAM, there is an effective attraction between monomers so that the colloidal chains are in a bad solvent. On heating, the chains decrease in size. For the most rigid chains, the decrease is modest and is not accompanied by a change in shape. Much less rigid chains form relatively compact structures, resulting in a large increase in the local monomer density. Unusually, chains with intermediate rigidity spontaneously assemble into helical structures. The chain helicity increases with temperature and plateaus above the collapse transition temperature of the microgel particles. We simulate a minimal model that captures the spontaneous emergence of the helical conformations of the polymeric chain and provides insight into this shape transition. Our work suggests that a purely mechanical instability for semiflexible filaments can drive helix formation, without the need to invoke directional interactions.}, doi = {10.1021/acsnano.1c07048}, author = {Biswas, Bipul and Mitra, Debarshi and KP, Fayis and Bhat, Suresh and Chatterji, Apratim and Kumaraswamy, Guruswamy} } @article {48676, title = {Electrode|electrolyte interface enhancement in quasi-solid-state zinc-air batteries through an anion conducting polymer electrolyte interlayer by in situ polymerization}, journal = {Journal of Materials Chemistry A}, volume = {11}, year = {2023}, month = {JUL}, pages = {14776-14787}, type = {Article}, abstract = {

This work introduces a novel concept of electrode|electrolyte interface enhancement using an ultraviolet (UV) light-assisted in situ polymerization strategy to improve the performance of quasi-solid-state zinc-air batteries (ZABs). The suitability of the UV polymerization strategy to process a mechanically stable OH- conducting anion exchange polymer electrolyte membrane (AEPEM) reinforced by a glass fiber (GF) separator is also reported. The in situ polymerized ionomer-skin/interlayer (a thin anion-conducting polymer coating over the air-cathode of ZAB) acts as a buffer layer to narrow down the performance gap generally observed between ZABs possessing quasi-solid-state electrolytes and standard liquid electrolytes, respectively. For instance, when combined with the in situ polymerization strategy, a rechargeable ZAB (rZAB) based on an AEPEM-GF composite membrane delivered a high power density of 140 mW cm(-2), higher than that of the one without an in situ polymerized ionomer interlayer (120 mW cm(-2)). Notably, in a flexible rZAB configuration, this new strategy resulted in enhanced rate capability and cycling stability for 14 h at an operating current density of 2 mA cm(-2).

}, issn = {2050-7488}, doi = {10.1039/d3ta02320f}, author = {Kurian, Maria and Vijayakumar, Vidyanand and Manna, Narugopal and Kanheerampockil, Fayis and Bhat, Suresh and Kurungot, Sreekumar} } @article {48805, title = {Polymerized stimuli-responsive microgels for the removal of organic dye from water}, journal = {Journal of Molecular Liquids}, volume = {375}, year = {2023}, month = {APR }, pages = {121267}, type = {Article}, abstract = {

Polymerized hydrogel materials (PGM) containing uniform-sized stimuli-responsive microgel particles could be promising alternatives for solution-based microgels to remove organic dyes from water. In the current work, PGM is prepared using Poly(N-isopropylacrylamide-co-acrylic acid) based anionic microgels and their ability for uptake and release studies with an oppositely charged dye, methylene blue (MB) is carried out using UV-vis spectroscopy. The mechanism of dye adsorption is understood at a single particle level using light scattering, and zeta potential and the contributions from different molecular interactions among dye molecules and constituting entities of microgels are obtained from molecular docking studies. The maximum dye uptake by PGM is around 80 \% in the swollen state (at pH 7 and 20 degrees C). In contrast, the dye release studies in the deswollen state (at pH 3 and 50 degrees C) show a decrease in the release efficiency from 87 \% to 63 \% of the total dye adsorbed in 4-repeated cycles. The adsorption isotherm follows a sigmoidal (S) model that has been majorly used in different multi-layer adsorption systems. Extensive dynamic and static light scattering studies demonstrate a deswelling of hydrody-namic radius and core-shell radius of microgels at low temperatures (20 degrees C) induced by dye adsorption. At higher temperatures, the dye-adsorbed microgels have a higher hydrodynamic radius than the pure microgels due to the remaining dye molecules within the microgel that do not release even in the deswollen state. Molecular docking studies show that electrostatic interaction dominates between COO- and MB and van der Waals/hydrophobic dominates for MB-NIPAM and MB-COOH docking complex respectively. Our work covering adsorption/desorption properties of the material to the single-particle level can provide a better understanding in formulating reusable smart materials for the remediation of different water pollutants.(c) 2023 Elsevier B.V. All rights reserved.

}, keywords = {dynamic light scattering, Molecular docking, PNIPAM microgels, Removal of organic pollutants, Stimuli -responsive microgels}, issn = {0167-7322}, doi = {10.1016/j.molliq.2023.121267}, author = {Pany, Biswajit and Majundar, Amrito Ghosh and Mohanty, Madhuchhanda and Fyis, K. P. and Dey, Tanima and Tripathy, Gautam and Bhat, Suresh and Yamanaka, Junpei and Mohanty, Priti S.} } @article {49075, title = {Polymerized stimuli-responsive microgel hybrids of silver nanoparticles as efficient reusable catalyst for reduction reaction}, journal = {Heliyon}, volume = {10}, year = {2024}, month = {MAR}, pages = {e26244}, type = {Article}, abstract = {

We have showcased the potential of polymerized hydrogels (PGMs) with uniform -sized stimuliresponsive microgel particles as promising alternatives to prevent aggregation in solution based nanoparticle systems. In the current work, we implemented the PGM concept by embedding anionic stimuli -responsive microgels (PNIPAM-co-AAc)-silver (Ag) hybrids within a hydrogel matrix. These PGM@AgNP hybrid materials are used as catalysts for the reduction of 4-nitrophenol (4 -NP) to 4-aminophenol (4 -AP) in the presence of sodium borohydride. UV-VIS spectroscopy is used for studying catalytic activity. In the solution based system, the complete reduction of 4NP to 4 -AP took 30 minutes with pure Ag nanoparticles, 24 minutes with PNIPAM-Ag hybrid (Neutral) microgels and 15 minutes with PNIPAM-co-AAc-Ag (Anionic) hybrid microgels. In contrast PGM containing PNIPAM-co-AAc-Ag hybrids achieved full reduction in just 15 minutes, along with a 3 -minute induction period. For pure Ag nanoparticles, the first -order rate constant is found to be 0.25 min - 1, for PNIPAM-Ag hybrid (Neutral), it is 0.21 min- 1 and for PNIPAM-coAAc-Ag (Anionic), it is 0.5 min- 1 where as for PGM containing anionic microgel hybrids it is found to be 0.8 min - 1. Furthermore, the reusability of the PGM-Ag (anionic) materials for catalytic activity remains unaltered even after several washings. In summary, our study highlights the effectiveness of PGM@AgNP materials as efficient catalysts for the reduction of 4-nitrophenol to 4-aminophenol, indicating their versatile potential in various catalytic applications.

}, keywords = {Light scattering, Microgel-metal hybrids, Nanomaterial catalysts, PNIPAM microgels, Polymerized hydrogel matrix(PGM, Stimuli-responsive microgels}, doi = {10.1016/j.heliyon.2024.e26244}, author = {Pany, Biswajit and Majumdar, Amrito Ghosh and Bhat, Suresh and Si, Satybrata and Yamanaka, Junpei and Mohanty, Priti S.} } @article {49772, title = {Anode|electrolyte|cathode interface engineering to develop a robust zinc metal hydrogel battery}, journal = {Journal of Materials Chemistry A}, volume = {13}, year = {2025}, month = {DEC }, pages = {41105-41121}, type = {Article}, abstract = {

The poor electrode-electrolyte interfaces in quasi-solid-state zinc metal batteries often hinder Zn2+ ion transport due to the poor compatibility of the gel electrolyte with the electrodes. This report proposes a dual-interface engineering strategy across the anode, cathode, and separator using a single hydrogel polymer electrolyte (HPE). The integration of vanadyl phosphate functionalized carbon nanotubes (VP/fCNT) into a commercial glass fiber (GF) separator, followed by a thin hydrogel coating and UV-light photopolymerization, resulted in a dual-interface engineered cathode-separator-electrolyte structure (VP/IC-EGF). To mitigate the dendritic growth, an artificial solid electrolyte interface was developed on Zn foil (AEI@Zn). The engineered GF (EGF) demonstrates a room-temperature conductivity of 6.5 mS cm-1 and a high electrochemical stability window of 2.4 V vs. Zn|Zn2+. The symmetric cell with AEI@Zn|EGF|AEI@Zn exhibits exceptional plating/stripping stability over 1400 h at a current density of 0.1 mA cm-2 and a capacity of 0.1 mAh cm-2. Moreover, the low-volume cell (AEI@Zn \& Vert;VP/IC-EGF), featuring the dual-interface-engineered cathode-separator-electrolyte, demonstrates outstanding cycling stability with over 3000 charge-discharge cycles at a current rate of 1.0 A g-1, retaining 98-99\% of its initial capacity and showing high coulombic efficiency. These findings underscore the significant impact of interface engineering on enhancing the performance of ZMBs.

}, issn = {2050-7488}, doi = {10.1039/d5ta04128g}, author = {Dilwale, Swati and Babu, Athira and Kanheerampockil, Fayis and Torris, Arun and Puthiyaveetil, Priyanka Pandinhare and Bhat, Suresh and Kurungot, Sreekumar} } @article {49531, title = {Self-supported super-hydrophilic interconnected nanospikes and particles of MoS2-Ni3S2/NF with optimum d-band center for anion exchange membrane water electrolyzer}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {MAR}, type = {Article}, abstract = {

There is an imperative need for highly efficient electrocatalysts for cost-effective hydrogen production. Herein, a self-supported, hybrid composite as a bifunctional electrocatalyst is introduced. This is achieved by in situ growth of MoS2-Ni3S2 on nickel foam (NF), designated as MoS2-Ni3S2/NF, synthesized by a facile one-step hydrothermal synthesis method. MoS2-Ni3S2/NF exhibits low overpotentials of only 187 and 146 mV for OER and HER, respectively, to achieve a current density of 10 mA cm-2 in 1 M KOH. The practical application of the designed bifunctional electrocatalyst is verified by constructing the MoS2-Ni3S2/NF || MoS2-Ni3S2/NF symmetrical membrane electrode assembly (MEA) of 4 cm2 working area for the anion exchange membrane water electrolyzer. The system shows continuous electrolysis for the monitored 48 h duration. For OER, an optimum d-band center of -1.66 eV for the heterostructure is calculated from the Density Functional Theory (DFT) studies. The factors like the unique structure of the electrocatalyst, enhanced hydrophilicity, improved electrochemically accessible number of sites (ECASs), and optimum d-band center, are expected to be the primary contributors to the system{\textquoteright}s improved performance. Thus, the present finding unveils a straightforward synthesis approach for creating a stable electrocatalyst for advancing commercial water electrolysis in the realm of renewable electrochemical energy conversion.

}, keywords = {AEM, d-band center, electrolyzer, HER, OER}, issn = {2366-7486}, doi = {10.1002/adsu.202400957}, author = {Kumar, Yogesh and Barik, Sidharth and Samudre, Nikhil S. and Kharabe, Geeta Pandurang and Chauhan, Inderjeet and Manna, Narugopal and Bhat, Suresh and Kurungot, Sreekumar} } @article {49835, title = {Self-healing hydrogel electrolyte enabled by dynamic polar covalent and noncovalent interactions for high-performance rechargeable zinc-metal batteries: a leap toward sustainable energy storage}, journal = {Advanced Energy Materials}, volume = {16}, year = {2026}, month = {JAN}, type = {Article}, abstract = {

Hydrogel polymer electrolytes with superior multifunctional properties are promising alternatives to aqueous electrolytes for resolving interfacial issues in rechargeable zinc-metal batteries. In this study, an intrinsic self-healing hydrogel polymer electrolyte (PHBC-4) is synthesized, engineered through an integrated approach involving the polar covalent (B \& horbar;O bond), hydrogen-bond (polyvinyl alcohol-hydroxypropyl methylcellulose interface), and coordination-type (Zn \& horbar;O) interactions to enable self-healing functionality. The PHBC-4 has demonstrated high ionic conductivity (4.6 x 10-2 S cm-1), good oxidative stability (2.3 V vs Zn|Zn2+), a high cation transference number (0.89), superior tensile strength (0.32 MPa), and an impressive healing efficiency of 93\% achieved just within 5 min, confirming its robust self-healing capability. In Zn||Zn symmetric cells, it effectively suppresses dendrite growth, ensuring stable cycling for over 1032 h with an areal capacity of 1.0 mAh cm-2 at a current density of 1.0 mA cm-2. When paired with a Zn-doped MnO cathode in the rechargeable homemade pouch cell, the system delivers a high specific capacity of 160 mAh g-1 at 0.10 A g-1 and cycling stability up to 493 charge-discharge cycles at 2.0 A g-1. The self-healing ability of PHBC-4 HGPE is confirmed in a homemade pouch cell via OCV and charge-discharge tests, demonstrating stable performance. The DFT studies confirm molecular-level interactions within the hydrogel heterostructure.

}, keywords = {dendrite inhibition, flexible rechargeable zinc metal battery, high cation transference number, self-healing hydrogel polymer electrolyte}, issn = {1614-6832}, doi = {10.1002/aenm.202502883}, author = {Puthiyaveetil, Priyanka Pandinhare and Kurian, Rachna Maria and Samudre, Nikhil S. and Balasubramanian, Rajalakshmi and Torris, Arun and Pockil, Fayis Kanheeram and Bhat, Suresh and Ajithkumar, T. G. and Krishnamurty, Sailaja and Kurungot, Sreekumar} }