@article {48935, title = {Active site engineering and theoretical aspects of {\textquoteleft}{\textquoteleft}Superhydrophilic{\textquoteright}{\textquoteright} nanostructure array enabling efficient overall water electrolysis}, journal = {Small}, volume = {19}, year = {2023}, month = {DEC}, type = {Article}, abstract = {

The rational design of noble metal-free electrocatalysts holds great promise for cost-effective green hydrogen generation through water electrolysis. In this context, here, the development of a superhydrophilic bifunctional electrocatalyst that facilitates both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline conditions is demonstrated. This is achieved through the in situ growth of hierarchical NiMoO4@CoMoO4 center dot xH(2)O nanostructure on nickel foam (NF) via a two-step hydrothermal synthesis method. NiMoO4@CoMoO4 center dot xH(2)O/NF facilitates OER and HER at the overpotentials of 180 and 220 mV, respectively, at the current density of 10 mA cm(-2). The NiMoO4@CoMoO4 center dot xH(2)O/NF parallel to NiMoO4@CoMoO4 center dot xH(2)O/NF cell can be operated at a potential of 1.60 V compared to 1.63 V displayed by the system based on the Pt/C@NF parallel to RuO2@NF standard electrode pair configuration at 10 mA cm(-2) for overall water splitting. The density functional theory calculations for the OER process elucidate that the lowest Delta G of NiMoO4@CoMoO4 compared to both Ni and NiMoO4 is due to the presence of Co in the OER catalytic site and its synergistic interaction with NiMoO4. The preparative strategy and mechanistic understanding make the windows open for the large-scale production of the robust and less expensive electrode material for the overall water electrolysis.

}, keywords = {density functional theory (DFT) study, hydrogen evolution reaction (HER), Hydrothermal synthesis, oxygen evolution reaction (OER), superhydrophilic nanostructures, synergistic interaction, water electrolysis}, issn = {1613-6810}, doi = {10.1002/smll.202304143}, author = {Barik, Sidharth and Kharabe, Geeta Pandurang and Illathvalappil, Rajith and Singh, Chandrodai Pratap and Kanheerampockil, Fayis and Walko, Priyanka S. and Bhat, Suresh K. and Devi, R. Nandini and Vinod, C. P. and Krishnamurty, Sailaja and Kurungot, Sreekumar} } @article {48309, title = {Cobalt-manganese modified theophrastite phase of nickel hydroxide nanoflower arrays on nickel foam as a self-standing bifunctional electrode for overall water electrolysis}, journal = {Sustainable Energy \& Fuels}, volume = {7}, year = {2023}, month = {MAY}, pages = {2428-2440}, type = {Article}, abstract = {

Designing and developing self-supported electrodes for water electrolysis is attractive as compared to conventional catalyst-coated electrodes. Herein, a (Co0.3Mn0.1Ni0.6)(OH)(2)/NF nanocomposite is prepared by anchoring (Co0.3Mn0.1Ni0.6)(OH)(2)via simple one-pot hydrothermal synthesis on nickel foam. The presence of Mn induces the external electronic structure of Co(OH)(2), and this also improves the electrochemically active surface area (ECSA). These favor better accessibility of active sites and increased intrinsic activity for the OER and HER. (Co0.3Mn0.1Ni0.6)(OH)(2)/NF has shown promising electrochemical activity toward the OER and HER in a 1 M KOH electrolyte, with an overpotential of 270 mV for the OER and 163 mV for the HER to deliver 10 mA cm(-2) current density. The overall water splitting was performed by employing (Co0.3Mn0.1Ni0.6)(OH)(2)/NF as both the cathode and anode by displaying a voltage of 1.62 V at 10 mA cm(-2), which is comparable to that extracted from a similar system based on the state-of-the-art Pt/C@NF cathode and RuO2@NF anode (1.60 V at 10 mA cm(-2)) standard electrode pair. Interestingly, at high current densities, the (Co0.3Mn0.1Ni0.6)(OH)(2)/NF//(Co0.3Mn0.1Ni0.6)(OH)(2)/NF system displayed better overall water splitting performance (1.78 V at 100 mA cm(-2)) compared to its Pt/C@NF//RuO2@NF (1.89 V at 100 mA cm(-2)) counterpart while displaying a stable output during the evolution period that lasted for 24 h. The amounts of H-2 and O-2 produced are estimated to be 701.2 and 358.6 mmol, respectively, at a time interval of 1 h; these amounts correspond to an similar to 1 : 2 ratio of O-2 and H-2, respectively. This study confirms the capability for employing (Co0.3Mn0.1Ni0.6)(OH)(2)/NF as a bi-functional and self-standing electrode for the realistic demonstrations of overall water splitting applications.

}, issn = {2398-4902}, doi = {10.1039/d3se00233k}, author = {Kharabe, Geeta Pandurang and Illathvalappil, Rajith and Barik, Sidharth and Kanheerampockil, Fayis and Walko, Priyanka S. and Bhat, Suresh K. and Devi, R. Nandini and Kurungot, Sreekumar} } @article {49367, title = {Aluminium, nitrogen-dual-doped reduced graphene oxide Co-existing with cobalt-encapsulated graphitic carbon nanotube as an activity modulated electrocatalyst for oxygen electrocatalyst for oxygen electrochemistry applications}, journal = {Small}, volume = {20}, year = {2024}, month = {AUG}, type = {Article}, abstract = {

There is a rising need to create high-performing, affordable electrocatalysts in the new field of oxygen electrochemistry. Here, a cost-effective, activity-modulated electrocatalyst with the capacity to trigger both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in an alkaline environment is presented. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with cobalt-encapsulated carbon nanotube units. Based on X-ray Absorption Spectroscopy (XAS) studies, it is established that the superior reaction kinetics in Al, Co/N-rGCNT over their bulk counterparts can be attributed to their electronic regulation. The Al, Co/N-rGCNT performs as a versatile bifunctional electrocatalyst for zinc-air battery (ZAB), delivering an open circuit potential approximate to 1.35 V and peak power density of 106.3 mW cm-2, which are comparable to the system based on Pt/C. The Al, Co/N-rGCNT-based system showed a specific capacity of 737 mAh gZn-1 compared to 696 mAh gZn-1 delivered by the system based on Pt/C. The DFT calculations indicate that the adsorption of Co in the presence of Al doping in NGr improves the electronic properties favoring ORR. Thus, the Al, Co/N-rGCNT-based rechargeable ZAB (RZAB) emerges as a highly viable and affordable option for the development of RZAB for practical applications. This manuscript reports the development of a new bifunctional catalyst that exhibits high activity and stability under practical operating conditions. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with the in situ formed cobalt-encapsulated CNT units is synthesized by a scalable pyrolysis method in an inert Ar atmosphere. The developed electrocatalyst achieved enhanced the oxygen reduction reaction (ORR) and the oxygen evolution reaction OER activity as a result of the favorable synergistic modulations and the system can serve as a process-friendly air-electrode for rechargeable zinc-air battery (RZAB). image

}, keywords = {Al, Bifunctional catalyst, DFT study, encapsulated structure, N-dual doping, Oxygen Evolution Reaction, oxygen reduction reaction, rechargeable zinc-air battery, X-ray absorption spectroscopy}, issn = {1613-6810}, doi = {10.1002/smll.202400012}, author = {Kharabe, Geeta Pandurang and Barik, Sidharth and Veeranmaril, Sudheesh Kumar and Nair, Aathira and Illathvalappil, Rajith and Yoyakki, Athira and Joshi, Kavita and Vinod, Chathakudath Prabhakaran and Kurungot, Sreekumar} } @article {49360, title = {Breaking the Pt electron symmetry and OH spillover towards ptir active center for performance modulation in direct ammonia fuel cell}, journal = {Small}, volume = {20}, year = {2024}, month = {DEC}, type = {Article}, abstract = {

The growing interest in low-temperature direct ammonia fuel cells (DAFCs) arises from the utilization of a carbon-neutral ammonia source; however, DAFCs encounter significant electrode overpotentials due to the substantial energy barrier of the *NH2 to *NH dehydrogenation, compounded by the facile deactivation by *N on the Pt surface. In this work, a unique catalyst, Pt4Ir@AlOOH/NGr i.e., Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles controllably decorated on the pseudo-boehmite phase of AlOOH-supported nitrogen-doped reduced graphene (AlOOH/NGr) composite, synthesized via the polyol reduction method. The detailed studies on the structural and electronic properties of the catalyst by XAS and VB-XPS reveal the possible electronic modulations. The optimized Pt4Ir/ANGr composition exhibits a significantly improved onset potential and mass activity for AOR. The DFT study confirms the OHad species spillover by AlOOH and Pt4Ir (100) facilitates the conversion of the *NH2 to *NH with minimal energy barriers. Finally, testing of DAFC at the system level using a membrane electrode assembly (MEA) with Pt4Ir/ANGr as the anode catalyst, demonstrating the suitability of the catalyst for its practical applications. This study thus uncovers the potential of the Pt4Ir catalyst in synergy with ANGr, largely addressing the challenges in hydrogen transportation, storage, and safety within DAFCs. In this article, a versatile catalyst, Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles decorated on AlOOH/NGr composite. The AlOOH provides an -OH-rich surface conducive to the facile adsorption and decoration of the PtIr alloy nanoparticles and OHad species spillover from AlOOH to the Pt4Ir active center during AOR, further validating the higher experimental activity obtained in Pt4Ir/ANGr. image

}, keywords = {ammonia oxidation reaction (AOR), d-band center, density functional theory (DFT) study, direct ammonia fuel cells, hydroxyl spillover effect, XAS analysis}, issn = {1613-6810}, doi = {10.1002/smll.202406589}, author = {Barik, Sidharth and Kharabe, Geeta Pandurang and Samal, Pragnya Paramita and Urkude, Rajashri R. and Kumar, Sachin and Yoyakki, Athira and Vinod, C. P. and Krishnamurty, Sailaja and Kurungot, Sreekumar} } @article {49067, title = {Co-incorporated N-doped micro-meso porous carbon as an electrocatalyst for oxygen reduction reaction and Zn-air battery}, journal = {Energy and Fuels}, volume = {38}, year = {2024}, month = {APR }, pages = {7196-7207}, type = {Article}, abstract = {

Metal-organic frameworks are considered ideal precursors for the preparation of transition-metal, heteroatom-doped carbon catalysts that are perceived to be efficient electrocatalysts for energy storage devices. Herein, we demonstrate the synthesis of ZIF-67-derived Co-incorporated N-doped porous carbon catalysts supported on high surface area microporous carbon prepared from a lotus seed shell. The combination of the two carbon catalysts in different weight ratios resulted in Co-incorporated N-doped carbon sheets with tuned surface area and porosity, enabling enhanced oxygen reduction reaction (ORR) activity in an alkaline medium. The optimized carbon catalyst ZL 600 (3:1) exhibited a half-wave potential of 0.79 V vs RHE and a limiting current density of -4.38 mA cm(-2) in 0.1 M KOH solution with higher stability and methanol tolerance. The optimized sample ZL 600 (3:1) demonstrated as a cathode in a zinc-air battery exhibited an open circuit voltage of 1.29 V with a flat discharge profile at a current rate of 10 mA cm(-2). The homemade system produced a specific capacity of 610 mAh g(-1) and a peak power density of 111 mW cm(-2), comparable to the cathode made with Pt/C. The high micro-mesoporosity, pyridinic and pyrrolic nitrogen contents, as well as enriched Co-active centers protected by carbon sheets favorably contributed to the efficient ORR mechanism.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.4c00059}, author = {Priya, Vaishna K. and Kharabe, Geeta Pandurang and Barik, Sidharth and Mohamed, A. Peer and Kurungot, Sreekumar and Hareesh, Unnikrishnan Nair Saraswathy} } @article {49080, title = {Role of nitrogen doping in modulating ruthenium nanocatalysts for enhanced electrochemical hydrogen evolution reaction in alkaline medium}, journal = {Chemistry of Materials }, volume = {36}, year = {2024}, month = {APR }, pages = {4262-4274}, type = {Article}, abstract = {

Nitrogen doping has become a fundamental approach to enhance the catalytic performance of carbon materials across various applications. The introduction of nitrogen creates defects and active sites, promoting the formation of small metal particles and strengthening the metal-support interaction within carbon materials. However, the challenge lies in developing sustainable and cost-effective methods for synthesizing nitrogen-doped carbon materials. In this study, we present a sustainable approach for the synthesis of ruthenium on nitrogen-doped carbon catalysts (Ru-CCP) using chitosan as a nitrogen and carbon source. Unlike traditional methods, our process avoids the use of additional nitrogen precursors and templates, streamlining the synthesis while using a renewable resource. The synthesized material exhibits an exceptional performance in the electrochemical hydrogen evolution reaction (HER) in alkaline conditions by achieving a current density of 25 mA cm(-2) at an impressively low overpotential of 46 mV, outperforming Pt/C under similar conditions. The detailed studies on structural and electronic properties of the materials using X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM) revealed that the remarkable catalytic activity is upheld by the unique interplay between Ru delta+ and surface nitrogen moieties, notably pyridinic and pyrrolic nitrogen. Here, we demonstrate the control of particle size and electronic environment around the metal atom via the interaction of nitrogen and unravel the role of nitrogen doping in tuning the catalytic performance. In addition, this work offers insights into efficient HER catalyst design and emphasizes the potential of biomass-derived materials like chitosan in advancing clean hydrogen production for renewable energy applications.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.3c03169}, author = {Korampattu, Lavanya and Barik, Sidharth and Pandikassala, Ajmal and Urkude, Rajashri R. and Kurungot, Sreekumar and Dhepe, Paresh L.} } @article {49780, title = {Binder-free in situ interface reconstruction of NiMoO4 nanorods over Ni(OH)2 nanosheets for efficient urea oxidation}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {DEC}, type = {Article}, abstract = {

Replacing the energy-intensive oxygen evolution reaction (OER) with the urea oxidation reaction (UOR) in electrochemical water splitting offers simultaneous green hydrogen production and urea-rich wastewater oxidation, enhancing energy efficiency and economic viability. In this study, a non-noble metal-based binder-free NiMoO4/Ni(OH)2/NF electrocatalyst is developed, featuring NiMoO4 nanorods anchored on Ni(OH)2 nanosheets. This unique morphology facilitates a highly active in situ reconstructed interface, delivering a current density of 134 mA cm-2 at 1.40 V (vs RHE) in 1 m KOH with 0.33 m urea, significantly outperforming its individual components. The catalyst demonstrates excellent stability over 50 h at 30 mA cm-2. When integrated into an anion exchange membrane urea electrolyser (13 cm2 area) with Pt@C/NF as the HER cathode, the system achieves 192 mA cm-2 at 1.60 V. The post-UOR studies confirm the presence of an amorphous NiMoO4-crystalline Ni(OH)2 interface, which plays a key role in enhancing the availability of the active sites to enhance the UOR performance. The improved electrochemical performance of the engineered catalyst can be ascribed to the in situ reconstructed amorphous-crystalline interface, optimal hydrophilicity, reduced charge transfer resistance, and the distinct morphology. This strategy offers a promising pathway for developing highly active electrocatalysts for energy conversion applications.

}, keywords = {AEM, electrolyser, OWS, tomography, UOR, wastewater}, issn = {2366-7486}, doi = {10.1002/adsu.202500883}, author = {Kumar, Yogesh and Barik, Sidharth and Kharabe, Geeta Pandurang and Torris, Arun and Singh, Mayank U. and Mohan, S. and Galave, Chaitanya and Tekawadia, Jyoti and Kanawade, Rajesh and Kurungot, Sreekumar} } @article {49802, title = {Defect-rich CoFe-alloy with engineered carbon support for high-performance rechargeable Zn-air batteries}, journal = {Small}, volume = {21}, year = {2025}, month = {SEP}, type = {Article}, abstract = {

Defect-rich CoFe-alloy with engineered carbon support is synthesized as a bifunctional cathode, coupled with a modified electrode fabrication technique, for rechargeable zinc-air batteries (RZABs). The CoFe(2:1)/N-rGCNT-catalyst is synthesized by annealing graphene oxide (GO), cobalt and iron acetate, and melamine, leading to the in situ formation of CoFe alloy-encapsulated CNTs. This resulted in a unique layer-separated Fe-rich skin@CoFe alloy decorated nitrogen-doped graphene (NGr) with CoFe-encapsulated CNTs. The interplay of line defects, enhanced conductivity, and electronic modulation underpins electrocatalyst{\textquoteright}s performance. Electrochemical analysis revealed an onset potential of 955 mV vs RHE, a half-wave potential of 835 mV vs RHE for oxygen reduction reaction (ORR) and an overpotential of 340 mV for oxygen evolution reaction (OER), yielding a Delta E of 0.73 V, comparable to the reported catalysts. The 3D X-ray microtomography simulations suggest improved air permeability of CoFe(2:1)/N-rGCNT facilitates easier gas diffusion, contributing in better device performance. The RZAB with CoFe(2:1)/N-rGCNT-cathode exhibited a peak power density of 171.3 mW cm(-)2, surpassing 140.8 mW cm(-)2 obtained from a cell based on Pt/C-cathode. The Co/N-rGCNT-based battery achieved a stable discharge profile at 10 mA cm(-)2 with a specific capacity of 650 mAh g(-)(1)Zn, and in rechargeable mode, achieved 140 h of high-rate charge-discharge cycling capability.

}, keywords = {3D tomography, N-doping, alloy encapsulated structure, device demonstration, grain boundaries, oxygen reduction and evolution reactions, rechargeable zinc-air battery}, issn = {1613-6810}, doi = {10.1002/smll.202505342}, author = {Kharabe, Geeta Pandurang and Barik, Sidharth and Torris, Arun and Maria, Anit and Kumar, Yogesh and Kurungot, Sreekumar} } @article {49573, title = {Hydrogel electrolyte-mediated in situ Zn-anode modification and the Ru-RuO2/NGr-coated cathode for high-performance solid-state rechargeable Zn-air batteries}, journal = {ACS Applied Materials \& Interfaces}, volume = {17}, year = {2025}, month = {JAN}, pages = {3188-3204}, type = {Article}, abstract = {

This work aims to deal with the challenges associated with designing complementary bifunctional electrocatalysts and a separator/membrane that enables rechargeable zinc-air batteries (RZABs) with nearly solid-state operability. This solid-state RZAB was accomplished by integrating a bifunctional electrocatalyst based on Ru-RuO2 interface nanoparticles supported on nitrogen-doped (N-doped) graphene (Ru-RuO2/NGr) and a dual-doped poly(acrylic acid) hydrogel (d-PAA) electrolyte soaked in KOH with sodium stannate additive. The catalyst shows enhanced activity and stability toward the two oxygen reactions, i.e., oxygen reduction and evolution reactions (ORR and OER), with a very low potential difference (Delta E) of 0.64 V. The computational insights bring out the electronic factors contributing to the enhanced catalytic activity of Ru-RuO2/NGr based on the charge density difference (CDD) between the interfaces. The disadvantages of the existing solid-state RZABs, such as their limited lifespan brought on by passivation, dendritic growth, corrosion, and shape change, have also been taken into account. The introduction of the stannate additive to the electrolyte induced an in situ Zn-anode modification, which subsequently improved the interfacial stability of the ZABs and, hence, the battery life cycles. The experimental observations reveal that, during the charging process, the Sn nanoparticles enable the homogeneous Zn deposition on the surface of the anode. Thus, the in situ Zn-anode surface modification assisted in achieving a high-rate cycle capability, viz., the homemade catalyst-based system exhibited continuous charge-discharge cycles for 20 h at a current density of 2.0 mA cm-2, with each cycle lasting for 5 min.

}, keywords = {Bifunctional Electrocatalyst, Core-ShellStructure, DFT study, electrolyte additive, Hydrogel, solid-state rechargeable zinc-airbattery, X-ray absorption spectroscopy}, issn = {1944-8244}, doi = {10.1021/acsami.4c14231}, author = {Kharabe, Geeta Pandurang and Verma, Tushar and Barik, Sidharth and Urkude, Rajashri R. and Ayasha, Nadeema and Ghosh, Biplab and Krishnamurty, Sailaja and Kurungot, Sreekumar} } @article {49531, title = {Self-supported super-hydrophilic interconnected nanospikes and particles of MoS2-Ni3S2/NF with optimum d-band center for anion exchange membrane water electrolyzer}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {MAR}, type = {Article}, abstract = {

There is an imperative need for highly efficient electrocatalysts for cost-effective hydrogen production. Herein, a self-supported, hybrid composite as a bifunctional electrocatalyst is introduced. This is achieved by in situ growth of MoS2-Ni3S2 on nickel foam (NF), designated as MoS2-Ni3S2/NF, synthesized by a facile one-step hydrothermal synthesis method. MoS2-Ni3S2/NF exhibits low overpotentials of only 187 and 146 mV for OER and HER, respectively, to achieve a current density of 10 mA cm-2 in 1 M KOH. The practical application of the designed bifunctional electrocatalyst is verified by constructing the MoS2-Ni3S2/NF || MoS2-Ni3S2/NF symmetrical membrane electrode assembly (MEA) of 4 cm2 working area for the anion exchange membrane water electrolyzer. The system shows continuous electrolysis for the monitored 48 h duration. For OER, an optimum d-band center of -1.66 eV for the heterostructure is calculated from the Density Functional Theory (DFT) studies. The factors like the unique structure of the electrocatalyst, enhanced hydrophilicity, improved electrochemically accessible number of sites (ECASs), and optimum d-band center, are expected to be the primary contributors to the system{\textquoteright}s improved performance. Thus, the present finding unveils a straightforward synthesis approach for creating a stable electrocatalyst for advancing commercial water electrolysis in the realm of renewable electrochemical energy conversion.

}, keywords = {AEM, d-band center, electrolyzer, HER, OER}, issn = {2366-7486}, doi = {10.1002/adsu.202400957}, author = {Kumar, Yogesh and Barik, Sidharth and Samudre, Nikhil S. and Kharabe, Geeta Pandurang and Chauhan, Inderjeet and Manna, Narugopal and Bhat, Suresh and Kurungot, Sreekumar} }