02253nas a2200301 4500008004100000022001400041245012100055210006900176260013200245300001200377490000600389520113200395653003001527653002001557653001601577653001601593653002701609653002301636653001901659653001401678100001701692700001901709700001901728700002401747700002101771700003001792856012901822 2010 eng d a1475-743500aFabrication of homogeneous nanoparticle/nanoneedle BaTiO3 and Ba0.8Sr0.2TiO3 smooth thin films by simple dip coating0 aFabrication of homogeneous nanoparticlenanoneedle BaTiO3 and Ba0 aWORLD TRADE CENTER BLDG, 29 ROUTE DE PRE-BOIS, CASE POSTALE 896, CH-1215 GENEVA, SWITZERLANDbINDERSCIENCE ENTERPRISES LTDcDEC a919-9310 v73 a

Ferroelectric BaTiO3 (BTO) and Ba0.8Sr0.2TiO3 (BSTO) thin film materials have been successfully prepared by sol-gel processing and simple dip coating on glass and silicon supports. Above thin films were characterised by x-ray diffraction (XRD), Raman spectroscopy, photoelectron spectroscopy, thermal analysis, atomic force microscopy (AFM) and spectroscopic ellipsometry. Phase identification of BaTiO3 and Ba0.8Sr0.2TiO3 was performed by XRD. XRD and Raman spectroscopy investigations demonstrate that thc Ba0.8Sr0.2TiO3 film exhibits tetragonal structure. AFM analysis demonstrates the elongated nanospherical particles on glass substrate and nanowires on silicon substrate, which represent a strong influence of the crystallinity of underlying substrate on the grain morphology in this technique. The thin films on both the substrates are uniformly coated without any pinhole to significant area (similar to 2.5 cm(2)), and this method might be extended to large area uniform coating. Spectroscopic ellipsometric measurements reveal the exact thickness, refractive index and extinction coefficient of the thin films.

10abarium strontium titanate10abarium titanate10adip coating10afabrication10aferroelectric material10alarge area coating10ananotechnology10athin film1 aSaini, Mamta1 aVivekanand, K.1 aPoddar, Pankaj1 aMurty, K., V. G. K.1 aThushara, K., S.1 aGopinath, Chinnakonda, S. uhttp://library.ncl.res.in/content/fabrication-homogeneous-nanoparticlenanoneedle-batio3-and-ba08sr02tio3-smooth-thin-films-002228nas a2200241 4500008004100000022001400041245010800055210006900163260000800232300000700240490000800247520142000255653001001675653002701685653001901712653001401731653002001745100001801765700002601783700002401809700003001833856012301863 2022 eng d a0974-362600aFacile, sustainable and unassisted plain water oxidation on Au/Ce0.9Ti0.1O2 nanorods in direct sunlight0 aFacile sustainable and unassisted plain water oxidation on AuCe0 cJUN a610 v1343 a

Impressive rate of solar water oxidation to molecular oxygen (O-2) has been demonstrated on nanorods (NRs) of Ce0.9Ti0.1O2 (CT-NR) and Au-deposited CT-NR (Au-CT-NR) photocatalysts with a sacrificial agent (Fe3+) and in plain water in one sun condition, direct sunlight and with lambda >= 455 nm. Probably the highest 0 2 yield of 11 mmol/h.g was observed with Au-CT-NR thin film in plain water in direct sunlight, with no sacrificial agent or applied potential. Photoelectrochemical measurements demonstrate a marked reduction in oxidation onset potential of Au-CT-NR by 150 mV with stable photocurrent (0.75 mA/cm(2)), compared to CT-NR (0.23 mA/cm(2)), indicating the operative of plasmon-induced resonant energy transfer (PIRET) process. Effective electron quenching by nanogold and hence low recombination in the depletion region is a critical step for the observation of a high rate of oxygen evolution. In addition to this, a predominant change in the nature of the valence band from O-2p dominated on CeO2 to Ce-4f dominated with CT-NR (due to Ti4+ introduction in CeO2), the efficient light absorption of photocatalysts in thin-film form, functional and effective PIRET process, and facile E-F alignment, enhances the oxygen evolution with Au-CT-NR in direct sunlight and make it highly sustainable. A possible mechanism of water oxidation is proposed from the observed experimental findings.

10aceria10aElectronic integration10aPhotocatalysis10athin film10awater splitting1 aDubey, Anjani1 aMishra, Abhaya, Kumar1 aNegi, Sanjay, Singh1 aGopinath, Chinnakonda, S. uhttp://library.ncl.res.in/content/facile-sustainable-and-unassisted-plain-water-oxidation-auce09ti01o2-nanorods-direct03097nas a2200277 4500008004100000022001400041245012600055210006900181260000900250300001200259490000600271520215500277653001902432653001902451653001902470653001402489653001202503100002302515700002102538700002902559700002902588700002402617700001902641700003002660856012902690 2023 eng d a2574-096200aFacile one-pot synthesis of Cu x O/TiO2 photocatalysts by regulating Cu oxidation state for efficient solar H2 production0 aFacile onepot synthesis of Cu x OTiO2 photocatalysts by regulati cDEC  a104-1160 v73 a

Development of highly efficient CuxO/TiO2 photocatalysts by regulating the oxidation state of Cu exclusively in either single or mixed oxidation state(s) is desirable but difficult to achieve without employing any external reagents. The present work describes a one-pot synthesis strategy to obtain CuxO/TiO2 photocatalysts with Cu in +1 and/or +2 by using a suitable combination of ethylene diamine tetra acetic acid (EDTA) and ethylene diamine, carefully varying the Cu content, and heat treatment process. CuxO/TiO2 nanocomposite catalysts were characterized thoroughly by physicochemical methods. Textural analysis indicates a high dispersion of CuxO on porous TiO2 with p-n heterojunctions between them in CuxO/TiO2 catalysts. UV-visible spectral analysis suggests the presence of CuxO on TiO2 with significantly extended absorption from the UV to the visible region. X-ray photoelectron spectroscopy (XPS) analysis indicates a strong synergetic interaction between TiO2 and CuxO due to the comparable CB potential and p-n heterojunction at the interface among them. Photoelectrochemical studies demonstrate excellent charge-carrier separation efficiency, low charge-transfer resistance, and high double-layer capacitance with Cu2O/TiO2 photocatalysts. Photocatalytic efficacy of a CuxO/TiO2 nanocomposite in thin-film form has been demonstrated for solar hydrogen generation in sunlight. The incorporation of Cu+ in TiO2 largely improves the H-2 production, and all of the CuxO/TiO2 nanocomposites in thin-film form exhibited higher efficiency compared to their particulate/suspension counterpart. Among the composite catalysts, TiCu-1 in thin-film form, with Cu exclusively in +1 oxidation state, exhibited a high hydrogen production rate of 7.06 mmol/hg, which is 6 times higher than its suspension counterpart; also catalysts containing mixed Cu-oxidation states exhibited about 60-70% activity as that of TiCu-1. The superior performance of Cu2O/TiO2 nanocomposites in thin-film form was due to their enhanced light harvesting ability, high mass transfer rate, and easy accessibility of the reactant species to the active sites.

10aheterojunction10aPhotocatalysis10aSolar hydrogen10athin film10atitania1 aRajendran, Sivaraj1 aMani, Sunesh, S.1 aNivedhitha, Thazhath, R.1 aAsoka, Anantha, Krishnan1 aArun, Pushkaran, S.1 aMathew, Thomas1 aGopinath, Chinnakonda, S. uhttp://library.ncl.res.in/content/facile-one-pot-synthesis-cu-x-otio2-photocatalysts-regulating-cu-oxidation-state-efficient