01963nas a2200253 4500008004100000022001400041245011800055210006900173260000800242490000600250520107500256653002001331653001901351653003101370653002501401653001901426100001801445700002701463700001701490700001701507700003001524700002701554856012801581 2023 eng d a2367-093200aVisible-light-active unsymmetrical squaraine dyes with 1 V of open-circuit voltage for dye-sensitized solar cells0 aVisiblelightactive unsymmetrical squaraine dyes with 1 V of open cMAY0 v73 a

A series of alkyl-group-functionalized, aniline- and indoline-donor-based, unsymmetrical visible-light-active squaraine dyes, AM1-3, were designed and synthesized. Dye-sensitized solar cell (DSSC) devices were fabricated with both I-/I-3(-) and [Cu(tmby)(2)](+/2+) electrolytes. DSSC devices sensitized with the AM1 and AM2 dyes showed relatively high-power conversion efficiency of 7.44 % and 7.22 %, respectively with I-/I-3(-) in the absence of chenodeoxycholic acid (CDCA) than those of the AM3 dye (5.41 %). The [Cu(tmby)(2)](+/2+) electrolyte along with poly(3,4-ethylenedioxythiophene) (PEDOT) as cathode material showed excellent open-circuit potentials (V-OC) of 1030, 1025, and 1001 mV with the DSSC efficiency of 8.05 %, 7.96 %, and 5.84 %, respectively, for the AM1, AM2, and AM3 dyes in the absence of CDCA. Here, the AM1 dye exhibited the maximum DSSC efficiency of 8.05 % and V-OC of 1030 mV, which is the highest obtained efficiency and V-OC for the visible-light active zwitterionic unsymmetrical-squaraine dye with copper-based electrolyte.

10aCu electrolytes10adihedral angle10aDye-sensitized solar cells10aopen circuit voltage10asquaraine dyes1 aSingh, Amrita1 aSingh, Ambarish, Kumar1 aDixit, Ruchi1 aVanka, Kumar1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/visible-light-active-unsymmetrical-squaraine-dyes-1-v-open-circuit-voltage-dye-sensitized03155nas a2200277 4500008004100000022001400041245011500055210006900170260000900239300001200248490000700260520223500267653002102502653001102523653001302534653002102547653002002568653001602588653000902604100003102613700002202644700002602666700003002692700002702722856012802749 2023 eng d a0743-746300aVisible-light-active unsymmetrical squaraine dyes with pyridyl anchoring groups for dye-sensitized solar cells0 aVisiblelightactive unsymmetrical squaraine dyes with pyridyl anc cDEC  a251-2630 v403 a

Visible-light-active alkyl group-wrapped unsymmetrical squaraine dyes SD1-SD3 were synthesized, featuring an indoline donor and pyridine and carboxylic acid anchoring groups. Their photophysical, electrochemical, and photovoltaic characteristics were examined by fabricating a dye-sensitized solar cell (DSSC) device. Both carboxylic acid and pyridine anchoring groups containing squaraine dyes SD3 and SD2 possess similar photophysical and electrochemical characteristics. However, their photovoltaic performances were completely different. The SD3 dye with the carboxylic acid anchoring group displayed a DSSC device efficiency of 7.20% (V-OC 0.81 V; J(SC) 12.29 mA/cm(2)) using iodolyte (I-/I-3(-)) electrolyte, compared to SD1 (V-OC 0.659 V; J(SC) 4.97 mA/cm(2); and eta - 2.34%) and SD2 (V-OC 0.629 V; J(SC) 1.68 mA/cm(2); and eta - 0.84%), which were featured with pyridyl anchoring groups. These results were attributed to dye loading on the Lewis and Br & oslash;nsted acidic sites of TiO2 and the importance of aggregated structures for photocurrent generation. In the incident photon-to-current efficiency (IPCE) analysis, SD1 dye-sensitized devices exhibited photocurrent generation from both monomeric and aggregated dyes on the TiO2 surface. In contrast, SD2 showed photocurrent generation solely from aggregated states. Despite the introduction of long alkyl chains to reduce dye aggregation and charge recombination, the results indicated preferential charge injection from only the aggregated SD2 dye on TiO2. Fluorescence-quenching experiments indicated an efficient charge transfer from the aggregated SD2 dye to TiO2 compared to that of the monomeric dye. Cosensitization, a method to enhance the light-harvesting efficiency and photocurrent generation in DSSCs, was explored by simultaneously cosensitizing pyridyl-based dyes (SD1 and SD2) with a blue-colored carboxylic acid-based squaraine dye SD4. IPCE analysis demonstrated that both SD1 and SD4 contributed to generating a photocurrent of 9.11 mA/cm(2). The sequential cosensitization of SD1 and SD4 with the coadsorbent CDCA showed the highest performance, with a V-OC of 0.663 V, a J(SC) of 11.43 mA/cm(2), and an efficiency (eta) of 5.20%.

10aco-sensitization10aDesign10aEmmision10aFluorescent Dyes10aHigh-Efficiency10aOrganic Dye10aRing1 aDeshmukh, Shivdeep, Suresh1 aMaibam, Ashakiran1 aKrishnamurty, Sailaja1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/visible-light-active-unsymmetrical-squaraine-dyes-pyridyl-anchoring-groups-dye-sensitized02593nas a2200277 4500008004100000022001400041245017000055210006900225260000900294300001400303490000600317520158800323653002401911653002701935653003201962653001701994653002602011653001902037100001802056700002702074700001702101700001702118700003002135700002702165856012302192 2024 eng d a2574-096200aVisible, far-red, and near-infrared active unsymmetrical squaraine dyes based on extended conjugation within the polymethine framework for dye-sensitized solar cells0 aVisible farred and nearinfrared active unsymmetrical squaraine d cFEB  a1461-14750 v73 a

Alkyl group wrapped visible, far-red, and NIR active unsymmetrical squaraine dyes with pi-extension in the polymethine framework-based AM4-AM7 have been designed, synthesized, and utilized as sensitizers for dye-sensitized solar cells. To extend the pi-conjugation within the polymethine framework, thiophene moieties have been incorporated between the donor and acceptor moieties. Absorption spectroscopic studies revealed that pi-extension with each -C & boxH;C- unit resulted similar to 100 nm of redshift in the charge transfer transition with the lambda(maximum) of 541, 643, 747, and 833 nm for AM4, AM5, AM6, and AM7 dyes, respectively, with the molar extinction coefficient of >10(5) M(-1)cm(-1). The pi-extended conjugation-based AM6 and AM7 dyes showed improved light-harvesting efficiency (LHE), where the AM7 dye showed an LHE of 386 nm at 60%. Electrochemical studies of AM dyes revealed that the HOMO energy level of the sensitizers has been modulated systematically. Further, pi-extension within the polymethine framework showed a dramatic effect on V-OC, J(SC), and device efficiency when move from visible active AM4 to far-red active to NIR active AM7 dyes. The DSSC efficiencies of 7.35, 5.18, 0.08, and 0.053% have been achieved with the I-/I-3(-) electrolyte (Z-50) for the AM4, AM5, AM6, and AM7 dyes, respectively. Further, AM4 dye has been cosensitized with AM5, AM6, and AM7 dyes, where AM4:AM5 (1:1) composition achieved the maximum efficiency of 8.12% with I-/I-3(-) electrolyte (Z-50) compared to the other cosensitization compositions.

10aaggregation of dyes10aDSSC device efficiency10alight-harvesting efficiency10api-extension10apolymethine framework10asquaraine dyes1 aSingh, Amrita1 aSingh, Ambarish, Kumar1 aDixit, Ruchi1 aVanka, Kumar1 aKrishnamoorthy, Kothandam1 aNithyanandhan, Jayaraj uhttp://library.ncl.res.in/content/visible-far-red-and-near-infrared-active-unsymmetrical-squaraine-dyes-based-extended