@article {44042, title = {Nutty carbon: morphology replicating hard carbon from walnut shell for na ion battery anode}, journal = {ACS Omega}, volume = {2}, year = {2017}, month = {JUL}, chapter = {3601{\textendash}3609}, abstract = {
Abstract Image

Efficient Na ion intercalation/deintercalation in the semigraphitic lattice of a hard carbon derived from the walnut shell is demonstrated. High-temperature (1000 {\textdegree}C) pyrolysis of walnut shells under an inert atmosphere yields a hard carbon with a low surface area (59 m2\ g{\textendash}1) and a large interplanar\ c\ axis separation of 0.39{\textendash}0.36 nm as compared to 0.32 nm for graphite, suitable for Na ion intercalation/deintercalation. A stable reversible capacity of 257 mAh g{\textendash}1\ is observed at a current density of 50 mA g{\textendash}1\ for such nutshell-derived carbon (NDC) with an impressive rate performance. No loss of electrochemical performance is observed for high current cycling (100 mA g{\textendash}1\ {\textrightarrow} 2 A g{\textendash}1\ {\textrightarrow} 100 mA g{\textendash}1). Additionally, the NDC shows remarkably stable electrochemical performance up to 300 charge{\textendash}discharge cycles at 100 mA g{\textendash}1\ with a minimal drop in capacity.

}, keywords = {Batteries, Biological and Medicinal chemistry, Biological materials, diffraction, Electric Properties, Electrode-electrolyte interface, spectra, Surface structure, Thermal properties}, doi = {10.1021/acsomega.7b00633}, author = {Wahid, M. and Gawli, Y. and Puthusseri, D. and Kumar, A. and Shelke, M. V. and Ogale, S.} } @article {45723, title = {Single cell fabrication towards the realistic evaluation of a CNT-strung ZIF-derived electrocatalyst as a cathode material in alkaline fuel cells and metal-air batteries}, journal = {ChemElectroChem}, volume = {4}, year = {2017}, month = {NOV}, pages = {2928-2933}, type = {Article}, abstract = {

The development of an electrocatalyst possessing all the vital requisites of an ideal electrode material, such as high porosity, high conductivity, and high intrinsic electrochemical activity, holds a decisive key in determining the activity of the triplephase boundary in many energy devices like fuel cells and metal-air battery systems. In the present work, highly porous cobalt-based ZIFs are strung along the highly conducive CNT backbone by using a simple one-pot technique at room temperature, which is then utilized to derive a porous, corrosion-resistant, Co nanoparticle-embedded electrocatalyst. Herein, for the first time, the single cell performance of the Co-ZIF-67-derived electrocatalyst has been evaluated by fabricating membrane electrode assemblies of alkaline exchange membrane fuel cell (AEMFC) and zinc-air battery (ZAB) systems. A maximum power density of 296 mW/cm(2) (vs. 317 mW/cm(2) for 40 wt.\% Pt/C) and 60 mW/cm(2) (vs. 64 mW/cm(2) for 40 wt.\% Pt/C) in the single cells of ZAB and AEMFC systems, respectively, establishes the practical proficiency of the homemade electrocatalyst for cathode applications during realistic system-level validations.

}, keywords = {Batteries, Carbon nanotubes, Composite materials, fuel cells, metal-organic frameworks}, issn = {2196-0216}, doi = {10.1002/celc.201700562}, author = {Aiyappa, Harshitha Barike and Bhange, Siddheshwar N. and Sivasankaran, Vijitha P. and Kurungot, Sreekumar} } @article {46748, title = {Electrochemical evaluation of the stability and capacity of r-GO-wrapped copper antimony chalcogenide anode for Li-ion battery}, journal = {ChemElectroChem}, volume = {7}, year = {2020}, month = {AUG }, pages = {3291-3300}, type = {Article}, abstract = {

Poor cycling stability and capacity fade are primary concerns for next-generation anode materials for Li-ion batteries. In non-carbonaceous anode materials, alloying with Li leads to volume increase that affects practical applications, and increase in particle size, amorphization and reduced conductivity can all lead to a loss of performance. In this work, binary antimony sulfide (Sb2S3) and ternary copper antimony sulfide (CuSbS2) are synthesized by a convenient solvothermal process. These materials are used to study the Li-active/inactive concept, by incorporating Cu into Sb(2)S(3)forming CuSbS(2)wherein Cu is Li inactive whereas Sb is Li active. By direct comparison, we have shown that incorporating Cu into binary antimony sulfide (Sb2S3) resulting into ternary copper antimony sulfide (CuSbS2) addresses the problem of poor conductivity and capacity loss, as Cu provides conductivity leading to enhanced charge transfer and prevents Sb particle aggregation while charge-discharge by exhibiting spectator or diluent ion effect. The better performance of CuSbS(2)is associated with the better Li(+)ion diffusion in the CuSbS2(D=8.97x10(-15) cm(2) s(-1)) compared to Sb2S3(D=2.76x10(-15) cm(2) s(-1)) and lower series resistance of CuSbS2(R=4.70x10(5) omega) compared to Sb2S3(R=5.81x10(8) omega). We have also investigated the composite with the addition of rGO. The CuSbS2-rGO delivered a reversible capacity of 672 mAh g(-1)after 1000 cycles at 200 mA g(-1)which has shown best performance.

}, keywords = {Batteries, chalcogenides, Diffusion coefficient, lithium, Ternary sulfides}, issn = {2196-0216}, doi = {10.1002/celc.202000625}, author = {Yadav, Poonam and Sharma, Neha and Patrike, Apurva and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha} } @article {48100, title = {Research progress and perspective on lithium/sodium metal anodes for next-generation rechargeable batteries}, journal = {ChemSusChem}, volume = {15}, year = {2022}, month = {JUL}, pages = {e202200504}, type = {Review}, abstract = {

With the development of consumer electronic devices and electric vehicles, lithium-ion batteries (LIBs) are vital components for high energy storage with great impact on our modern life. However, LIBs still cannot meet all the essential demands of rapidly growing new industries. In pursuance of higher energy requirement, metal batteries (MBs) are the next-generation high-energy-density devices. Li/Na metals are considered as an ideal anode for high-energy batteries due to extremely high theoretical specific capacity (3860 and 1165 mAh g(-1) for Li and Na, respectively) and low electrochemical potential (-3.04 V for Li and -2.71 V for Na vs. standard hydrogen electrode). Unfortunately, uncontrolled dendrite growth, high reactivity, and infinite volume change induce severe safety concerns and poor cycle efficiency during their application. Consequently, MBs are far from commercialization stage. This Review represents a comprehensive overview of failure mechanism of lithium/sodium metal anode and its progress for rechargeable batteries through (i) electrolyte optimization, (ii) artificial solid-electrolyte interphase (SEI) layer formation, and (iii) nanoengineering at materials level in current collector, anode, and host. The challenges in current MBs research and potential applications of lithium/sodium metal anodes are also outlined and summarized.

}, keywords = {anode, Batteries, dendrite growth, Electrolytes, Energy storage}, issn = {1864-5631}, doi = {10.1002/cssc.202200504}, author = {Patrike, Apurva and Yadav, Poonam and Shelke, Vilas and Shelke, Manjusha} } @article {49687, title = {Diamondoid all-carbon porous aromatic framework host for lithium-sulfur batteries}, journal = {Small}, volume = {21}, year = {2025}, month = {JUN}, pages = {2500388}, type = {Article}, abstract = {

Lithium-sulfur batteries (LSBs) hold incredible potential as next-generation energy storage systems. However, practical applications of LSBs are significantly hindered by several critical challenges. For the first time, scalable all-carbon porous 3D polymers (3DPs) that do not contain heteroatoms or functional groups and do not require post-functionalization are investigated as hosts in lithium-sulfur batteries, demonstrating enhanced cycling stability and overall battery performance. The pyrene-containing 3DP exhibits 75\% capacity retention after 600 cycles at 1 C and 52\% capacity retention after 1300 cycles at 0.2 C, better than phenyl comprising 3DP. Furthermore, even at higher sulfur loading (4.1 mg cm(-2)) with an electrolyte/sulfur ratio of 5 mu L mg(-1), pyrene 3DP displayed a high capacity of 600 mA h g(-1) and stable performance over 250 cycles with negligible capacity fade. The defined pore structure of 3DPs prevents the migration of polysulfides through physical confinement and the large pi -clouds of 3DPs interact with the negative charge-bearing polysulfides generated in charge-discharge cycles through anion-pi interaction. In this way, The design ensures that the host 3DPs interact with neutral sulfur and anionic polysulfides, resulting in an excellent performance.

}, keywords = {3D polymers, Batteries, Li-Sulfur battery, porous materials, pyrene}, issn = {1613-6810}, doi = {10.1002/smll.202500388}, author = {Kumar, Viksit and Javaregowda, Bharathkumar H. and Devasia, George and Narayanan, Aswini and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Babu, Sukumaran Santhosh} }