@article { ISI:000376330800049, title = {Earth abundant iron-rich N-doped graphene based spacer and cavity materials for surface plasmon-coupled emission enhancements}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {19}, year = {2016}, month = {MAY}, pages = {12324-12329}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We demonstrate for the first time the use of Fe based nanoparticles on N-doped graphene as spacer and cavity materials and study their plasmonic effect on the spontaneous emission of a radiating dipole. Fe-C-MF was produced by pyrolizing FeOOH and melamine formaldehyde precursor on graphene, while Fe-C-PH was produced by pyrolizing the Fe-phenanthroline complex on graphene. The use of the Fe-C-MF composite consisting of Fe-rich crystalline phases supported on N-doped graphene presented a spacer material with 116-fold fluorescence enhancements. On the other hand, the Fe-C-PH/Ag based cavity resulted in an 82-fold enhancement in Surface Plasmon-Coupled Emission (SPCE), with high directionality and polarization of Rhodamine 6G (Rh6G) emission owing to Casimir and Purcell effects. The use of a mobile phone as a cost-effective fluorescence detection device in the present work opens up a flexible perspective for the study of different nanomaterials as tunable substrates in cavity mode and spacer applications.

}, keywords = {Casimir effect, fluorescence enhancements, iron carbides, N-doped graphene, Purcell factor, surface plasmon-coupled emission}, issn = {1944-8244}, doi = {10.1021/acsami.5b12038}, author = {Srinivasan, Venkatesh and Vernekar, Dnyanesh and Jaiswal, Garima and Jagadeesan, Dinesh and Ramamurthy, Sai Sathish} } @article {43882, title = {Activity tuning of cobalt ferrite nanoparticles anchored on N-doped reduced graphene oxide as a potential oxygen reduction electrocatalyst by Zn substitution in the spinel matrix}, journal = {Chemistry Select}, volume = {2}, year = {2017}, month = {SEP}, pages = {7845-7853}, type = {Article}, abstract = {

Development of highly efficient and durable ORR catalysts by using non-platinum group metals (such as Co, Fe, Mn, and Zn) is a challenging task in the forward path towards the realization of low-cost energy devices in the commercial stream. The present work deals with an effective strategy wherein an efficient Pt-free electrocatalyst for oxygen reduction reaction (ORR) is prepared by stoichiometrically substituting some fraction of Fe with Zn in cobalt ferrite and anchoring these spinel nanoparticles on nitrogen doped reduced graphene oxide (N-rGO). Zn substitution is found to be significantly altering the ratio of Fe2+/Fe3+ in the cobalt ferrite nanocrystal system with a concomitant promotional influence on its electrocatalytic activity towards ORR. The nanoparticle composition with a Co, Fe and Zn molar ratio of 1.0:1.7:0.3, represented by the formula CoFe1.7Zn0.3O4(CFZn(0.3)), supported over N-rGO has shown 10 mV and 20 mV positive shift in the onset and half-wave potentials, respectively, for ORR in 0.1 M KOH in comparison to the nanoparticles of CoFe2O4 supported over N-rGO (CF/N-rGO). The optimum Zn substitution is found to be narrowing down the difference with the state-of-the-art Pt/C for ORR by 100 and 110 mV in terms of the onset and half-wave potentials, respectively. Most significantly, the homemade catalyst is found to be clearly outperforming the Pt catalyst in terms of the limiting current density and electrochemical durability.

}, keywords = {Carbon Nano-fiber, Cathod Catalyst, CoFe2O4, Evolution, Magnetic-properties, Membrane fuel- Cell, Metal-Air Batteries, N-doped graphene, Nanocrystalline, nanocrystals, oxygen reduction reaction, performance, Platinium, solvothermal synthesis, Zn substituted cobalt ferrite}, issn = {2365-6549}, doi = {10.1002/slct.201701684}, author = {Kashyap, Varchaswal and Singh, Santosh K. and Kurungot, Sreekumar} } @article {47824, title = {Surface alteration driven bi-functional catalytic activity of alkali niobate-N doped graphene composite for exalted oxygen electrochemistry}, journal = {Applied Surface Science}, volume = {580}, year = {2022}, month = {APR}, pages = {152160}, type = {Article}, abstract = {In this work, we establish that surface reconstruction, oxygen vacancies {\textemdash}specifically those located on the catalyst surface, and high crystallinity can be effective in tuning the catalytic activity of perovskite oxides. We report a high-performance electrocatalyst with an orthorhombic perovskite structure (NaNbO3), having an anisotropic surface layer and high crystallinity that exhibits superior activity and durability for the bi-functional oxygen electrochemistry compared to that of a similar perovskite composition with an isotropic surface layer and low crystallinity. The improvement in the electrocatalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is mainly attributed to the formation of an easy diffusion path on the surface layer due to the ionic movements, enhanced intrinsic activity of the catalytic sites resulting from the higher crystallinity, high oxygen vacancies and a large electrochemically active surface area. The sole key parameter in achieving all the acquired characteristics is the annealing temperature. We believe that the straightforward method of bringing the desired combination of properties by just tweaking the annealing temperature is handy and energy-efficient, and hence easily adoptable.}, keywords = {Bi-functionality, N-doped graphene, Oxygen Evolution Reaction, oxygen reduction reaction, perovskite, Surface reconstruction}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2021.152160}, author = {Suman Kumari Jhajharia and Shashaank Gupta and Zinoy Manappadan and Kaliaperumal Selvaraj and Myoor K. Padmanabhan and Roop L. Mahajan} }