@article { ISI:000242931900034, title = {Field emission from oriented tin oxide rods}, journal = {Thin Solid Films}, volume = {515}, number = {4}, year = {2006}, month = {DEC}, pages = {1450-1454}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The {\textquoteleft}onset{\textquoteright} field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {field emission, microstructures, scanning electron microscopy, tin oxide}, issn = {0040-6090}, doi = {10.1016/j.tsf.2006.04.034}, author = {Deshpande, A. C. and Koinkar, Pankaj M. and Ashtaputre, S. S. and More, Mahendra A. and Gosavi, S. W. and Godbole, P. D. and Joag, Dilip S. and Kulkarni, S. K.} } @article { ISI:000249834900020, title = {Field emission investigations of RuO2-doped SnO2 wires}, journal = {Applied Surface Science}, volume = {253}, number = {23}, year = {2007}, month = {SEP}, pages = {9159-9163}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Field emission studies of a bunch and a single isolated RuO2:SnO2 wire have been performed. A current density of 5.73 x 10(4) A/cm(2) is drawn from the single wire emitter at an applied field of 8.46 x 10(4) V/mu m. Nonlinearity in the Fowler-Nordheim (F-N) plot has been observed and explained on the basis of electron emission from both the conduction and the valence bands of the semiconductor. The current stability recorded at the preset value of 1.5 LA is observed to be good. Overall the high emission current density, good stability and mechanically robust nature of the RuO2:SnO2 wires offer advantages as field emitters for many potential applications. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {doped semiconductor, field emission, field enhancement factor, RuO2, SnO2}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2007.05.058}, author = {Bhise, Ashok B. and Late, Dattatray J. and Ramgir, Niranjan S. and More, Mahendra A. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K. and Joag, Dilip S.} } @article { ISI:000267498700010, title = {Field emission investigation of single Fe-doped SnO2 wire}, journal = {Solid State Sciences}, volume = {11}, number = {6}, year = {2009}, month = {JUN}, pages = {1114-1117}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Tin oxide submicronwires doped with Fe element were prepared by the thermal evaporation method. Morphological and structural characterizations revealed wires with sub micron size and crystalline in nature. The field electron emission from the single Fe:SnO2 wire was carried out in conventional field emission microscope. The Fowler-Nordheim plot obtained from I-V characteristics of the wire showed a linear behavior typical that of metal. The field enhancement factor estimated from the slope of the F-N plot is 7455 cm(-1), indicating that the field emission is from nanometric features of the emitter. A current density of 10 A/cm(2) has been obtained at an applied field of 4.845 x 10(3) V/mu m. The field emission current-time record at a current level of 1 mu A for more than 3 h duration is promising for various field emissions based applications. (C) 2009 Published by Elsevier Masson SAS.

}, keywords = {Current stability, Fe doped, field emission, SnO2}, issn = {1293-2558}, doi = {10.1016/j.solidstatesciences.2009.02.011}, author = {Bhise, Ashok B. and Late, Dattatray J. and Sathe, Bhaskar R. and More, Mahendra A. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K. and Joag, Dilip S.} } @article { ISI:000271238900027, title = {Field emission properties of Al-doped ZnO nanostructures}, journal = {Journal of Nano Research}, volume = {5}, year = {2009}, month = {JAN}, pages = {231-237}, publisher = {TRANS TECH PUBLICATIONS LTD}, address = {LAUBISRUTISTR 24, STAFA-ZUERICH, CH-8712, SWITZERLAND}, abstract = {

Field emission from Al-doped ZnO nanostrcutures has been investigated in planar diode configuration under ultra high vacuum conditions. The Al-doped ZnO nanostructures were synthesized by co-precipitation method with varying aluminium concentrations. The as- synthesized product was characterized by x-ray diffraction, scanning electron microscope and energy dispersive x-ray analysis. The threshold field required to draw a current density of similar to 1 mu A/cm(2) was observed to be similar to 2.0 V/mu m and similar to 2.3 V/mu m for Al-doped ZnO nanostructures synthesized with aluminium concentrations of 1\% and 3\%, respectively. The Fowler- Nordheim (F-N) plots for both the specimens exhibit non-linear behaviour, which is observed to be specimen dependent. The nonlinearity observed in the F-N plots has been interpreted on the basis of the theory of electron emission from semiconductor emitters. The field enhancement factors, estimated from the slope of the F-N plots, are found to be similar to 9.3 x 10(3) and 3.9 x 10(3) for 1\% and 3\% Al-doped ZnO emitters, respectively. The high values of the field enhancement factor Suggest that the emission is from the nanostructures. The emission current stability measured at the preset value of similar to 2 mu A over a period of more than three hours is found to be fairly stable. The results indicate use of Al-doped ZnO nanostructures as promising emitters for field emission based devices.

}, keywords = {field emission, Fowler-Nordheim plots, Nanostructures, ZnO}, issn = {1662-5250}, author = {Navale, Shalaka C. and Sheini, Farid Jamali and Patil, Sandip S. and Mulla, Imtiaz S. and Joag, Dilip S. and More, Mahendra A. and Gosavi, Suresh W.} } @article { ISI:000285413300005, title = {Fabrication of In-doped SnO2 nanowire arrays and its field emission investigations}, journal = {Journal of Experimental Nanoscience}, volume = {5}, number = {6}, year = {2010}, month = {DEC}, pages = {PII 931283663}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

The field emission of In-doped SnO2 wire array has been performed in parallel plate diode configuration. A maximum current density of 60 mu A/cm2 is drawn from the emitter at an applied field of 4 V/mu m. The nonlinearity in the Fowler-Nordheim plot, characteristics of semiconductor emitter has been observed and explained on the basis of electron emission from both the conduction and the valence bands. The current stability recorded at a preset value of 1 mu A is observed to be good. The high emission current density, good current stability and mechanically robust nature of the wires offer unprecedented advantages as promising cold cathodes for many potential applications based on field emission.

}, keywords = {cold cathodes, device, Doping, field emission, Nanowires, SnO2}, issn = {1745-8080}, doi = {10.1080/17458081003671683}, author = {Bhise, Ashok B. and Late, Dattatray J. and Sathe, B. and More, Mahendra A. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K. and Joag, Dilip S.} } @article { ISI:000283453700016, title = {Fowler-nordheim plot behavior and mechanism of field electron emission from ZnO tetrapod structures }, journal = {ACS Nano}, volume = {4}, number = {10}, year = {2010}, month = {OCT}, pages = {5585-5590}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Field emission measurements of current-voltage characteristics are reported for tetrapod structures of ZnO. The nonlinear Fowler-Nordheim (FN) plot is analyzed according to a model of calculation based on saturation of conduction band current and predominance of valence band current at high-field values. The simulated FN plot exhibits similar features to those observed experimentally. The model of calculation suggests that the slope variation of the FN plot, in the high-field and low-field regions, does not depend on the magnitude of saturation. Instead, it is a characteristic of the energy band structure and voltage-to-barrier-field conversion factor of the emitting material.

}, keywords = {field emission, Fowler-Nordheim plot, Nanostructures, nonlinearity, ZnO}, issn = {1936-0851}, doi = {10.1021/nn1008403}, author = {Al-Tabbakh, Ahmed A. and More, Mahendra A. and Joag, Dilip S. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K.} } @article { ISI:000281153600066, title = {High current density, low threshold field emission from functionalized carbon nanotube bucky paper}, journal = {Applied Physics Letters}, volume = {97}, number = {7}, year = {2010}, month = {AUG}, pages = {073102}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Field emission studies of bucky paper of multiwalled carbon nanotubes (MWNTs), prepared after microwave (MW) assisted acid functionalization are reported along with a comparison with that of {\textquoteleft}{\textquoteleft}as-grown{\textquoteright}{\textquoteright} sample. MW treated bucky papers reveal an interesting linear field emission behavior in Fowler-Nordheim plot. The field emission currents at preset value are found to be remarkably stable over a period of more than 3 h sustaining current densities of 4.9 mA/cm(2) and 8.5 mA/cm(2) for {\textquoteleft}{\textquoteleft}as-grown{\textquoteright}{\textquoteright} and functionalized sample, respectively. The enhancement in the field emission due to functionalization has been discussed in terms of tip opening and defect induced charge transport caused by intershell and intertubular interaction. (C) 2010 American Institute of Physics. [doi:10.1063/1.3479049]

}, keywords = {Carbon nanotubes, current density, field emission, fullerenes}, issn = {0003-6951}, doi = {10.1063/1.3479049}, author = {Kakade, Bhalchandra A. and Pillai, Vijayamohanan K. and Late, Dattatray J. and Chavan, Padmakar G. and Sheini, Farid J. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000290015600029, title = {Field emission studies of silver nanoparticles synthesized by electron cyclotron resonance plasma}, journal = {Applied Surface Science}, volume = {257}, number = {16}, year = {2011}, month = {JUN}, pages = {7184-7189}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Field emission has been studied for silver nanoparticles (25-200 nm), deposited within a cylindrical silver target in an electron cyclotron resonance (ECR) plasma. Particle size distribution was controlled by optimum biasing voltages between the chamber and the target. Presence of non-oxidized silver was confirmed from the X-Ray diffraction analysis; however, thin protective layer of oxide was identified from the selective area electron diffraction pattern obtained with transmission electron microscopy. The silver nanoparticles were seen to exhibit hilly pointed like structures when viewed under the atomic force microscopy (AFM). The emissive properties of these particles were investigated by field emission microscopy. It is found that this technique of deposition is ideal for formation of nanoparticles films on different substrate geometries with size controllability as well as its application to emission devices. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Cold plasma, field emission, Nanoparticles, thin film}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2011.03.088}, author = {Purohit, Vishwas and Mazumder, Baishakhi and Bhise, Ashok B. and Poddar, Pankaj and Joag, Dilip S. and Bhoraskar, S. V.} } @article { ISI:000291725100012, title = {Synthesis of Cu-ZnO and C-ZnO nanoneedle arrays on zinc foil by low temperature oxidation route: effect of buffer layers on growth, optical and field emission properties}, journal = {Applied Surface Science}, volume = {257}, number = {20}, year = {2011}, month = {AUG}, pages = {8366-8372}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Different densities of ZnO nanoneedle films have been prepared by pre-coated zinc foils with thin layer of copper and carbon followed by thermal oxidation at 400 degrees C in air. The X-ray diffraction patterns show well defined peaks, which could be indexed to the wurtzite hexagonal phase of ZnO. The scanning electron microscope images clearly reveal formation of ZnO needles on the entire substrate surface. The X-ray photoelectron spectroscopy studies indicate that Cu and C ions are incorporated into the ZnO lattice. Photoluminescence studies evaluate different emission bands originated from different defect mechanism. From the field emission studies, the threshold field, required to draw emission current density of similar to 100 mu A/cm(2), is observed to be 2.25 V/mu m and 1.57 V/mu m for annealed zinc foil pre-coated with copper and carbon, respectively. The annealed film with copper layer exhibits good emission current stability at the pre-set value of similar to 100 mu A over a duration of 4 h. The results show that buffer layer is an important factor to control the growth rate, resulting in different density of ZnO needles, which leads to field emission properties. This method may have potential in fabrication of electron sources for high current density applications. (C) 2011 Elsevier B. V. All rights reserved.

}, keywords = {Buffer layer, Carbon, Copper, field emission, Nanoneedle, ZnO}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2011.04.023}, author = {Jamali-Sheini, Farid and Patil, K. R. and Joag, Dilip S. and More, Mahendra A.} } @article { ISI:000330143000008, title = {CdS nanowires: ultra-long growth and enhanced field emission properties}, journal = {Vaccum}, volume = {101}, number = {SI}, year = {2014}, month = {MAR}, pages = {38-45}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Here, we report the synthesis of ultra-long CdS nanowires with aspect ratio similar to 8 x 10(4) by simple route of thermal evaporation technique. A change in the vertical arrangement of quartz boats leads in to the synthesis of ultra-long CdS nanovvires via high degree of condensation. This technique is seen to be cost effective and easy. The growth of the nanowires is found to be increased very rapidly from few micrometers to few millimeters. The possible reason for the growth of the ultra-long CdS nanowires is discussed in detail. The turn-on field defined for the current density of similar to 0.1 mu A/cm(2) has been found to be similar to 1.4, 1.45, 1 and 0.17 V/mu m for specimen A, B, C and D (specimens A-D, synthesized by variation in synthesis parameters) respectively. The turn-on field of the specimen D (similar to 0.17 V/mu m) is found to be quite superior than the value reported for other CdS nanoforms which is very remarkable. Simple way of bulk fabrication leads to the low turn-on value which indicates a possible use of the present emitter in the micro/nanoelectronics devices. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Current stability, field emission, synthesis}, issn = {0042-207X}, doi = {10.1016/j.vacuum.2013.07.019}, author = {Chavan, Padmakar G. and Kashid, Ranjit V. and Badhade, Satish S. and Mulla, Imtiaz S. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000344791100009, title = {Metallic few-layer flowerlike VS2 nanosheets as field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {31}, year = {2014}, month = {NOV}, pages = {5331-5336}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report first-principles DFT calculations of the single-layer VS2 work function, the experimental synthesis of flower-like few-layer-thick VS2 nanosheets by a simple one-step hydrothermal method, and the investigation of their field emission properties. The turn-on field required to draw emission current densities of 1 and 10 mu A/cm(2) were 4 and 5.01 V/mu m, respectively. The observed turn-on field values are attributed to the high field enhancement factor (ca. 2500), which is due to presence of sharp protrusions in the VS2 nanosheets. Furthermore, the field-emission current stability of the VS2 emitter shows stable behavior over a period of 12 h. Further, DFT calculations show that the work function (f) of the single-layer VS2 emitter is 6.01 eV.

}, keywords = {Density functional calculations, field emission, Layered compounds, Nanostructures, Sulfur, Vanadium}, issn = {1434-1948}, doi = {10.1002/ejic.201402448}, author = {Rout, Chandra Sekhar and Khare, Ruchita T. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Lanzillo, Nicholas A. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @conference { ISI:000352795700039, title = {Photo-enhanced field emission studies of tapered CdS nanobelts}, booktitle = {2014 27th International Vacuum Nanoelectronics Conference (IVNC) }, series = {International Vacuum Nanoelectronics Conference}, year = {2014}, note = {27th International Vacuum Nanoelectronics Conference (IVNC), Engelberg, SWITZERLAND, JUL 06-10, 2014}, month = {JUL}, publisher = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, organization = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, address = {345 E 47th St, New York, NY 10017 USA}, abstract = {

Field emission and photo-enhanced field emission characteristics of single crystalline tapered CdS nanobelts have been investigated. The turn-on field for the emission current density of similar to 0.1 mu A/cm(2) is found to be similar to 2.1 V/mu m, which is much lower than reported values for various CdS nanostructures. The photo-enhanced field emission current shows a reproducible photo-switching behavior with rise in current level nearly four times that of its initial preset value (similar to 1 mu A) which is found to be very remarkable. Possible mechanism of photo-enhanced field emission is discussed.

}, keywords = {Current stability, field emission, Nanobelts, Photoswitching}, isbn = {978-1-4799-5306-6}, issn = {2164-2370}, author = {Chavan, Padmakar G. and More, Mahendra A. and Joag, Dilip S. and Badadhe, Satish S. and Mulla, Imtiaz S.}, editor = {Tsujino, S. and Gobrecht, J. and Paraliev, M. and Braun, H. H. and Groening, O. and Feurer, T.} } @conference {46367, title = {Photosensitive field emission study of SnS2 nanosheets (27th International Vacuum Nanoelectronics Conference )}, booktitle = {2014 27TH International Vacuum Nanoelectronics Conference (IVNC)}, year = {2014}, month = {JUL}, publisher = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, organization = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, address = {345 E 47TH ST, NEW YORK, NY 10017 USA}, abstract = {

SnS2 nanosheets (SnS(2)NSs), synthesized by one-step hydrothermal reaction, are subjected to Field Emission (FE) studies. For synthesis, specific concentrations of Na2SnO3 and thioamide solution are used. The FE study is carried out in all metal Ultra High Vacuum (UHV) chamber in planar diode configuration at a base pressure of similar to 10(-8) torr. A maximum current density of 110 mu A/cm(2) was attainable. The turn on field required to draw a current density of 1 mu A/cm(2) is found to be 2.6 V/mu m. A separate study was carried out to investigate the photosensitivity of the emitter by illuminating the specimen under visible light. In dark, the FN plot is non-linear, indicative of semiconductor nature of the emitter. However, on illumination, the FN plot is observed to be linear. This remarkable change can be explained by the photoconductivity imparted on illumination. The field at the tip is high in presence of light, than in dark, due to enhanced conductivity. It is also observed that on switching ON the light, the FE current increases almost instantaneously. Repetitive switching is observed at a fixed applied voltage, generating current pulses. The visible light soaking of the sample is carried out by illuminating the lamp for more than 100 minutes, where the current seems to saturate. On switching off the lamp the emission current decayed almost to its initial value exponentially. The photosensitivity has been studied for different wavelengths in the visible spectra. The maximum photosensitive field emission is observed for green filter. With this photoresponse, it is envisaged that SnS2 nanosheets are a potential candidate for optoelectronic applications of field emitters.

}, keywords = {field emission, photosensitivity, Photoswitching}, isbn = {978-1-4799-5306-6}, author = {Joshi, Padmashree D. and Joag, Dilip S. and Rout, Chandra Shekhar and Late, Dattatray J.}, editor = {Tsujino, S and Gobrecht, J and Paraliev, M and Braun, HH and Groening, O and Feurer, T} } @article { ISI:000342328300031, title = {Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {18}, year = {2014}, month = {SEP}, pages = {15881-15888}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.

}, keywords = {field emission, MoS2, photodiode heterostructures, pulsed laser deposition, thin film}, issn = {1944-8244}, doi = {10.1021/am503464h}, author = {Late, Dattatray J. and Shaikh, Parvez A. and Khare, Ruchita T. and Kashid, Ranjit V. and Chaudhary, Minakshi V. and More, Mahendra A. and Ogale, Satishchandra B.} } @article { ISI:000357868100006, title = {Electrochemically exfoliated black phosphorus nanosheets - prospective field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {19}, year = {2015}, month = {JUL}, pages = {3102-3107}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Herein we report field emission (FE) investigations on an electrochemically exfoliated few-layered black phosphorus nanosheet emitter at a base pressure of approximately 1x10(-8) mbar. The turn-on electric field required to draw an emission current density of approximately 10 A/cm(2) is found to be about 4.2 V/m. Furthermore, few-layered black phosphorus nanosheet emitters deliver an emission current density of about 170 A/cm(2) at an applied field of about 7.5 V/m. The emission current vs. time plot measured at preset current values of about 5 A shows emission current fluctuations within +/- 10\% of the average value, indicating the highly stable nature of the black phosphorus field emitter. Thus, the 2D black phosphorus nanosheets synthesized using the simple electrochemical exfoliation method can be utilized for micro/nanoelectronics and flat panel FE display applications.

}, keywords = {field emission, Layered compounds, Nanostructures, Phosphorus}, issn = {1434-1948}, doi = {10.1002/ejic.201500145}, author = {Erande, Manisha B. and Suryawanshi, Sachin R. and More, Mahendra A. and Late, Dattatray J.} } @article { ISI:000370057200011, title = {Enhanced electron field emission from NiCo2O4 nanosheet arrays}, journal = {Materials Research Express}, volume = {2}, number = {9}, year = {2015}, month = {SEP}, pages = {095011}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Electron emission properties of electrodeposited spinel NiCo2O4 nanosheet arrays grown on Ni foam have been studied. The work function of NiCo2O4 was calculated by density functional theory using the plane-wave basis set and used to estimate the field enhancement factor. The NiCo2O4 nanosheet arrays exhibited a low turn-on field of 1.86 V mu m(-1) at 1 mu A cm(-2) and current density of 686 mu A cm(-2) at 3.2 V mu m(-1), with field enhancement factor beta = 1460 and good field emission current stability. The field emission properties of the NiCo2O4 nanosheet arrays showed enhanced performance compared to chemically prepared NiCo2O4 nanosheets. Hence, the nanosheet arrays have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

}, keywords = {Density functional theory, field emission, nanosheets, NiCo2O4, spinel}, issn = {2053-1591}, doi = {10.1088/2053-1591/2/9/095011}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Gelamo, Rogerio V. and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article { ISI:000348455100007, title = {Spectral analysis of the emission current noise exhibited by few layer WS2 nanosheets emitter}, journal = {Ultramicroscopy}, volume = {149}, year = {2015}, month = {FEB}, pages = {51-57}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Spectral analysis of the field emission (FE) current fluctuations has been carried out at the base pressure similar to 1 x 10(-8) mbar. The emission current stability investigated at preset value of 2 mu A is characterized by {\textquoteleft}step like fluctuation. The spectral analysis performed on a FFT (Fast Fourier Transform) analyzer revealed that the observed noise is of 1/f(alpha) type, with the value of alpha as similar to 1.05. The estimated value of alpha implies that the current fluctuations are mainly due the various processes occurring on atomic scale like adsorption, migration, and/or desorption of the residual gas species on the emitter surface. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Current fluctuations, field emission, Noise, WS2 nanosheets}, issn = {0304-3991}, doi = {10.1016/j.ultramic.2014.10.004}, author = {Suryawanshi, Sachin R. and Kolhe, Pankaj S. and Rout, Chandra S. and Late, Dattatray J. and More, Mahendra A.} } @article { ISI:000373421700065, title = {Architecture of 2D MoS2 nanosheets and 3D CdMoS4 marigold flowers: consequence of annealing on field emission performance}, journal = {Microporous and Mesoporous Materials}, volume = {225}, year = {2016}, month = {MAY}, pages = {573-579}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Herein, we report the field electron emission investigations on template free solvothermally synthesized layered MoS2 nanosheets as well as novel phase of CdMoS4 nanoflowers at the base pressure of similar to 1 x 10(-8) mbar. The turn-on field, threshold field and maximum emission current densities for both MoS2 and CdMoS4 are strongly influenced by thermal annealing in inert atmosphere. The turn on field, required to draw emission current density of 1 mu A/cm(2) is found to be 5.8 and 3.2 V/mu m for pristine and annealed MoS2 at 400 degrees C. In case of as prepared and annealed CdMoS4 sample the turn on field values are found to be similar to 6.2 and 5.0 V/mu m, respectively. The emission current versus time (I-t) plot measured at the preset current values of similar to 1 mu A for pristine and annealed sample indicates stable operation of the emitter. The emission current fluctuations for annealed sample are observed to be less as compared with the pristine sample due to conditioning of the emitter, thereby showing highly stable nature of emitter. Thus, the present result demonstrates the potential of annealed MoS2 nanosheets and CdMoS4 nanoflowers as an emerging materials for micro/nanoelectronics and flat panel field emission display applications. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {field emission, MoS2 and CdMoS4, Nanoflowers, nanosheets}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2016.01.033}, author = {Kadam, Sunil R. and Suryawanshi, Sachin R. and Panmand, Rajendra P. and Mate, Vivek R. and More, Mahendra A. and Late, Dattatray J. and Kale, Bharat B.} } @article { ISI:000377811100004, title = {Enhanced field emission behavior of layered MoSe2}, journal = {Materials Research Express}, volume = {3}, number = {3}, year = {2016}, month = {MAR}, pages = {Article Number: 035003}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Herein, we report one step facile chemical vapor deposition method for synthesis of single-layer MoSe2 nanosheets with average lateral dimension similar to 60 mu m on 300 nm SiO2/Si and n-type silicon substrates and field emission investigation of MoSe2/Si at the base pressure of similar to 1 x 10(-8) mbar. The morphological and structural analyses of the as-deposited single-layer MoSe2 nanosheets were carried out using an optical microscopy, Raman spectroscopy and atomic force microscopy. Furthermore, the values of turn-on and threshold fields required to extract an emission current densities of 1 and 10 mu A cm(-2), are found to be similar to 1.9 and similar to 2.3 V mu m(-1), respectively. Interestingly, the MoSe2 nanosheet emitter delivers maximum field emission current density of similar to 1.5 mA cm(-2) at a relatively lower applied electric field of similar to 3.9 V mu m(-1). The long term operational current stability recorded at the preset values of 35 mu A over 3 hr duration and is found to be very good. The observed results demonstrates that the layered MoSe2 nanosheet based field emitter can open up many opportunities for their potential application as an electron source in flat panel display, transmission electron microscope, and x-ray generation. Thus, the facile one step synthesis approach and robust nature of single-layer MoSe2 nanosheets emitter can provide prospects for the future development of practical electron sources.

}, keywords = {atomically thin nanosheets, chemical vapor deposition, field emission, layered MoSe2}, issn = {2053-1591}, doi = {10.1088/2053-1591/3/3/035003}, author = {Suryawanshi, Sachin R. and Pawbake, Amit S. and Pawar, Mahendra S. and Jadkar, Sandesh R. and More, Mahendra A. and Late, Dattatray J.} } @conference {45825, title = {Field emission investigation of composites of polypyrrole with graphene oxide, reduced graphene oxide and graphene nanoribbons}, booktitle = {2016 29th International Vacuum Nanoelectronics Conference (IVNC)}, year = {2016}, month = {JUL}, publisher = {IEEE; IEEE Electron Devices Soc; ZEISS; Modern Electron; Amer Vacuum Soci; Paul Scherrer Inst; Elect \& Comp Engn; Univ British Columbia, Peter Wall Inst Adv Studies; Dept Elect \& Comp Engn}, organization = {IEEE; IEEE Electron Devices Soc; ZEISS; Modern Electron; Amer Vacuum Soci; Paul Scherrer Inst; Elect \& Comp Engn; Univ British Columbia, Peter Wall Inst Adv Studies; Dept Elect \& Comp Engn}, address = {345 E 47th St, New York,NY 10017 USA}, abstract = {

The monomer pyrrole has been polymerized by chemical route in the presence of graphene oxide (GO), reduced graphene oxide (rGO) and graphene nanoribbons (GNR) separately to prepare nanocomposites as Polypyrrole-GO (PGO), PPy-rGO (PRGO), PPy-GNR (PGNR), respectively. The morphological, chemical and structural characterization of the as-synthesized products was carried out using scanning electron microscopy (SEM), Raman and fourier transform infrared (FTIR) spectroscopy. Field emission (FE) studies of PGO, PRGO, PGNR emitters were performed at the base pressure of 1x10(-8) mbar in planar {\textquoteleft}diode{\textquoteright} configuration. Onset and threshold field values corresponding to emission current densities of 1 and 100 mu A/cm(2) are observed to be 1.5 and 2.3V/mu m for PGO, 1.4 and 2.2 V/mu m for PRGO and lowest for PGNR as 0.9 and 1.2V/mu m, respectively. The maximum emission current density of 2.5 mA/cm(2) drawn for PGO at the applied electric field of 3.2V/mu m, 1.2 mA/cm(2) at 3.6V/mu m from the PRGO and 8 mA/cm(2) at the field of 2.2 V/mu m from the PGNR emitters. An emission current versus time (I-t) plot shows stable emission behavior for the preset current values.

}, keywords = {field emission, FTIR, polypyrrole, Raman}, isbn = {978-1-5090-2419-3}, author = {Harpale, Kashmira and Bansode, Sanjeewani and More, Mahendra and Late, D. J.} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} } @article {43980, title = {Enhanced field emission performance of NiMoO4 nanosheets by tuning the phase}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {270-274}, type = {Journal Article}, abstract = {In this paper we report, large scale synthesis of α and β-NiMoO4 by a facile hydrothermal method and we observed that urea plays important role on the growth of β-NiMoO4 nanosheets. We have also carried out field emission (FE) investigations of α and β-NiMoO4 at a base pressure of \~{}1 {\texttimes} 10-8 mbar. The obtained turn-on field at emission current density of 1 μA/cm2 for β-NiMoO4 nanosheets and α -NiMoO4 is 1.3 V/μm and 2.2 V/μm respectively were observed. The maximum field emission current density of 1.006 mA/cm2at an applied electric field of 2.7 V/μm was achieved for β-NiMoO4 nanosheets. Furthermore, we found that the β-NiMoO4 nanosheets possess good field emission performance compared to α-NiMoO4. The results indicate that NiMoO4can be used as a promising material in FE applications with possibility of tuning field emission performance by controlling the phase.}, keywords = {Current stability, field emission, nanosheets, NiMoO4}, doi = { 10.1016/j.apsusc.2017.02.177}, author = {Bankar, P. K.}, editor = {Ratha, S.} } @article {45698, title = {Extraction of the very high tunneling current and extremely stable emission current from GdB6/W-tip source synthesized using arc plasma}, journal = {ChemistrySelect}, volume = {2}, year = {2017}, month = {JAN}, pages = {562-566}, type = {Article}, abstract = {

Herein, we report the one step arc plasma synthesis of the GdB6 (Gadolinium hexaboride) nanoparticles and its field emission (FE) characteristics on tungsten point substrate (GdB6/ W). The SEM /TEM analysis revealed the GdB6 nanoparticles on W point substrate exhibit irregular shaped, grainy, dense, course morphology, i.e. uniformly covering the entire tip substrate surface. For GdB6/W point source, the values of the turn-on and threshold fields, defined as field required to draw an emission current density similar to 1 mA/cm(2) and similar to 100 mA/cm(2), respectively are found to be similar to 2.2 and similar to 2.7 V/mm, for anodecathode separation of similar to 1 mm. Interestingly, a very high emission current density of similar to 3.5 A/cm(2) has been drawn from the GdB6/W point emitter at relatively lower applied field of similar to 6.4 V/mm. The field enhancement factor found to be similar to 10,250. The GdB6/W point electron source exhibits a good emission current stability at similar to 10 mA for a period of 6 hr. The emission current stability is enumerated in terms of standard deviation and its magnitude has been measured to be only 1.72\% with respect to the average value. The superlative field emission characteristics signify the GdB6/W point electron source as potential candidates for vacuum micro/nanoelectronics device applications.

}, keywords = {Arc Plasma, field emission, Thin films}, issn = {2365-6549}, doi = {10.1002/slct.201601587}, author = {Suryawanshi, Sachin R. and Kanhe, Nilesh and Mathe, Vikas L. and Phase, Deodatta M. and Late, Dattatray J. and More, Mahendra A.} } @article {44548, title = {Phenazine-containing poly(phenylenevinylene): a new polymer with impressive field emission properties}, journal = {Journal of Polymer Research}, volume = {25}, year = {2018}, month = {FEB}, pages = {Article Number: 61}, abstract = {

Phenazine-containing poly(phenylenevinylene) (P(PHN-PV)) was synthesized using Wittig-Horner polycondensation of the appropriately designed monomers viz. 5,10-dioctyl-5,10-dihydrophenazine-2,7-dicarbaldehyde and tetraethyl ((2,5-bis((2-ethylhexyl) oxy)-1,4 phenylene) bis(methylene)) bis(phosphonate). The design embraces the specific motivation of incorporating the nitrogen-containing heterocycle viz. .phenazine in poly(phenylenevinylene) backbone. P(PHN-PV) exhibited reversible redox properties. In the field emission measurements performed on the film of P(F{\textquoteright}HN-PV), the turn-on field was observed to be 1.93 V/mu m for the current density of 10 mu A/cm(2). The maximum current density of similar to 4.87 mA/cm(2) was achieved at the applied field of 3.84 V/mu m. The emission current showed impressive stability for 6 h at a constant current of 1 mu A (current density of about 20 mu A/cm(2)). These results emphasize the role of phenazine heterocycle with lone pair of electrons on nitrogen in lowering the oxidation onset and in turn reduction of the turn-on voltage.

}, keywords = {field emission, Phenazine, Poly(phenylenevinylene)}, issn = {1022-9760}, doi = {10.1007/s10965-017-1428-8}, author = {Chhatre, Shraddha and Ichake, Amol and Harpale, Kashmira and Patil, Sumati and Deshpande, Aparna and More, Mahendra and Wadgaonkar, Prakash P.} } @article {46040, title = {Graphene nanosheets assisted carbon hollow cylinder for high-performance field emission applications}, journal = {Materials Research Express}, volume = {6}, year = {2019}, month = {SEP}, pages = {095066}, type = {Article}, abstract = {

Electron sources are critical constituents for myriad many electronic applications including electron imaging, mass spectroscopy etc. Here, we report the realization of high-performance field emission from graphene assisted carbon hollow cylinders (Gr-CHCs) composed of multi-stacked radially aligned CNTs. These CHCs have built-in synthesis related Fe nanoparticles (NPs). This engineered nano-structure exhibits excellent field emission properties such as one of the ultra-low turn-on field (0.64V mu m(-1) at 10 mu A cm(-2)), low threshold field (0.74V mu m(-1) at 100 mu A cm(-2)), very high current density (15.49 mA cm(-2) at 1.32V mu m(-1)) which is nearly double the current density obtained in our previous study. High field enhancement factor (0.72. x. 10(4)) with highly stable emission current at 100 mu A was observed for more than 3 hrs at the base pressure of similar to 1. x. 10(-8) mbar. This study suggests an approach to enhance the current density using the proposed innovative nanostructure and forms the basic theme of this communication. Highly efficient and stable field emissions observed are attributed to the geometry of cylinder and the production of the high density of sharp protrusions within the graphene sheets which enhance the local electric field and dramatically enhance field emission. This innovative cylindrical geometry associated with graphene assisted on Fe bearing aligned CNTs along with the periphery of the bulk cylinder provides an easy injection of electrons from the conduction band of CHCs into the vacuum in the presence of an external electric field. The tunability of field emission properties of these CHCs can be easily achieved by tailoring their diameter (10 and 20 mm) and different concentrations of the precursor. This new approach of the graphene assisted cylindrical geometry-based field emitter source provides enormous prospects and demand for next-generation high resolutions display devices.

}, keywords = {Carbon nanotubes, field emission, graphene assisted carbon hollow cylinder, protrusions}, issn = {2053-1591}, doi = {10.1088/2053-1591/ab3030}, author = {Tripathi, Prashant and Gupta, Bipin Kumar and Bankar, Prashant K. and More, Mahendra A. and Late, Dattatray J. and Srivastava, Onkar Nath} } @article {46057, title = {Realization of efficient field emitter based on reduced graphene oxide-Bi2S3 heterostructures}, journal = {Physica Status Solidi A-Applications and Materials Science}, year = {2019}, month = {JUL}, pages = {1900121}, type = {Article; Early Access}, abstract = {

Herein, Bi2S3 nanorods and reduced graphene oxide (rGO)-Bi2S3 heterostructures are synthesized using a simple hydrothermal method. The structural, morphological, chemical, and elemental analysis of as-synthesized materials is performed using X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Field emission (FE) studies are carried out on both pristine Bi2S3 nanorods and rGO-Bi2S3 heterostructure samples at a base pressure of approximate to 1 x 10(-8) mbar. The results show that the rGO-Bi2S3 heterostructure emitter has superior FE performance compared to pristine Bi2S3 emitters in terms of the turn-on field (2.6 V mu m(-1) at 10 mu A cm(-2)) and threshold field (4.0 V mu m(-1) at 100 mu A cm(-2)) along with a high emission current density of approximate to 1464 mu A cm(-2) at an applied electric field of 7.0 V mu m(-1). The rGO-Bi2S3 heterostructure emitter exhibits very good emission current stability, tested for more than 3 h duration, characterized by standard deviation values approximate to 2.84 and 4.06, corresponding to preset values 12 and 100 mu A. This study implies that one-step hydrothermal route can be efficiently used to synthesize organic-inorganic heterostructures that possess unique morphology. Furthermore, the synthesized rGO-Bi2S3 heterostructure emitter shows potential as an electron source for practical application in vacuum microelectronic devices.

}, keywords = {Bi2S3, field emission, Heterostructures, Nanorods, Reduced graphene oxide}, issn = {1862-6300}, doi = {10.1002/pssa.201900121}, author = {Gote, Gorkshnath H. and Bhopale, Somnath R. and More, Mahendra A. and Late, Dattatray J.} } @article {44433, title = {VSe2-reduced graphene oxide as efficient cathode material for field emission}, journal = {Journal of Physics and Chemistry of Solids }, volume = {128}, year = {2019}, month = {MAY}, pages = {384-390}, type = {Journal Article}, abstract = {

Field emission properties of pristine VSe2 and its hybrid with reduced graphene oxide (RGO) have been investigated in detail. Promising field emission performance were noted with lower values of turn-on and threshold fields of \~{}1.3 V μm-1 and 2.12 V μm-1 respectively for the VSe2/RGO hybrid which is much more superior than that of pristine VSe2 emitter and other 2D materials. Density Functional Theory (DFT) simulations have also been performed to qualitatively support our experimental observations through demonstration of Density of States and computation of work function for pristine VSe2 and hybrid VSe2/RGO. The lowering of work function and appearance of additional states near Fermi level from carbon p orbital of RGO is responsible for superior field emission characteristics in hybrid VSe2/RGO compared to pristine VSe2 which supports our experimental observations. Our experimental data and theoretical insight from electronic structure simulations strongly infer that the synthesized hybrid VSe2/RGO has the potential to be tailored as efficient and high performance cathode material in field emission based devices.

}, keywords = {cathode material, Chalcogenide, Density functional theory, field emission, Vanadium diselenide, Work function}, issn = {223697}, doi = {10.1016/j.jpcs.2018.02.020}, author = {Ratha, S.}, editor = {Bankar, P.} } @article {48147, title = {Facile synthesis of nanocomposites of CNF-Sn and C-Sn microspheres: Prospective field emitter}, journal = {Journal of Alloys and Compounds}, volume = {907}, year = {2022}, month = {JUN }, pages = {164318}, type = {Article}, abstract = {

We report synthesis of Carbon nanofibers (CNFs) and hybrid nanocomposites namely, CNF-Sn and C-Sn microspheres using simple electrospinning technique, followed by annealing in controlled atmosphere. The as-prepared materials were characterized using X-raydiffraction (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Ultra-violet photoelectron spectroscopy (UPS), and Raman spectroscopy to reveal their physico-chemical properties. As carbon family members are potential materials for field emission (FE) based applications, owing to their high aspect ratio FE characteristics of the synthesized materials were explored at base pressure of 1 x 10(-8) mbar. Interestingly, the hybrid nanocomposite CNF-Sn and C-Sn emitters showed improved FE behavior (with the turn-on field of 3.4 and 1.36 V/mu m, respectively) in contrast to the pristine CNFs emitter (turn-on field of 5.4 V/mu m). Furthermore, the maximum emission current density is substantially enhanced, 7.75 and 4.6 mA/cm(2) for CNF-Sn and C-Sn emitters, respectively. The improvement in the FE behavior of nanocomposite emitters is attributed to the combined effect of morphology and modulation of electronic properties at the interface of nanocomposites. The results confirm that FE characteristics of pristine nanostructures can be greatly improved upon formation of their nanocomposites and this approach can be extended to other nanostructures for improving their multi-functionalities. (c) 2022 Elsevier B.V. All rights reserved.

}, keywords = {carbon nanofiber, electrospinning, field emission, Nanocomposite, Tin}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2022.164318}, author = {Badadhe, Satish S. and Yadav, Poonam and Suryawanshi, Sachin and More, Mahendra A.} } @article {48342, title = {Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices}, journal = {ACS Applied Nano Materials}, volume = {6}, year = {2023}, month = {JAN}, pages = {44-49}, type = {Article}, abstract = {

The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.

}, keywords = {Current stability, field emission, nanoribbon, nanosheets, TiS3}, doi = {10.1021/acsanm.2c03460}, author = {Pawbake, Amit S. and Khare, Ruchita T. and Island, Joshua O. and Flores, Eduardo and Ares, Jose R. and Sanchez, Carlos and Ferrer, Isabel J. and Pawar, Mahendra and Frank, Otakar and More, Mahendra A. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.} }