@article { ISI:000270363600029, title = {Enhanced conversion efficiency in dye-sensitized solar cells based on hydrothermally synthesized TiO2-MWCNT nanocomposites}, journal = {ACS Applied Materials \& Interfaces}, volume = {1}, number = {9}, year = {2009}, month = {SEP}, pages = {2030-2035}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A 50 \% enhancement in the conversion efficiency (4.9-7.37 \%) is realized in dye-sensitized solar cells Using hydrothermally synthesized TiO2-multiwalled carbon nanotube (MWCNT) nanocomposites as compared to hydrothermally synthesized TiO2 without MWCNT and Degussa P25. Several characterizations have been employed to reveal the nature of the modification imparted to the MWCNTs under hydrothermal processing conditions and the resulting TiO2-MWCNT conjugation through -COOH groups. Efficient charge transfer In the nanocomposite and efficient electron transport by MWCNT (significantly higher Incident-photon-to-current conversion efficiency) are suggested to be the possible reasons for the enhancement.

}, keywords = {Carbon nanotubes, charge transfer, Dye-sensitized solar cells, Hybrid composite, hydrothermal}, issn = {1944-8244}, doi = {10.1021/am900396m}, author = {Muduli, Subas and Lee, Wonjoo and Dhas, Vivek V. and Mujawar, Sarfraj and Dubey, Megha and Vijayamohanan, K. and Han, Sung-Hwan and Ogale, Satishchandra} } @article { ISI:000291832600007, title = {Enhanced DSSC performance with high surface area thin anatase TiO2 nanoleaves}, journal = {Solar Energy}, volume = {85}, number = {6, SI}, year = {2011}, month = {JUN}, pages = {1213-1219}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Thin anatase TiO2 nanoleaves (NLs) with high surface area (similar to 93 m(2)/g) are synthesized by hydrothermal route and dye-sensitized solar cells (DSSC) made using such NLs are compared with those made with hydro-thermally synthesized TiO2 nanoparticles and the Degussa P25 powder. The NLs-based DSSCs show increment of 16\% and 24\% in the total conversion efficiency over the cells made with NPs and P25 respectively. Interestingly, the highest increment in the conversion efficiency (similar to 35\%) is achieved for cells made using a 50:50 (wt/wt) mixture of NLs and NPs. In this case the dye loading is found to be \>50\% higher than the case of NP films. Moreover the DC resistance of diffusion of I-3(-) in electrolyte (as revealed by the electrochemical impedance spectroscopy) is substantially lower than the NP film case, other cell parameters being nominally comparable. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Dye-sensitized solar cells, Electrochemical impedance spectroscopy, hydrothermal}, issn = {0038-092X}, doi = {10.1016/j.solener.2011.02.029}, author = {Dhas, Vivek V. and Muduli, Subas and Agarkar, Shruti A. and Rana, Abhimanyu and Hannoyer, Beatrice and Banerjee, Rahul and Ogale, Satishchandra B.} } @article { ISI:000303304900028, title = {TiO2-Au plasmonic nanocomposite for enhanced dye-sensitized solar cell (DSSC) performance}, journal = {Solar Energy}, volume = {86}, number = {5}, year = {2012}, month = {MAY}, pages = {1428-1434}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Anatase TiO2 nanoparticles dressed with gold nanoparticles were synthesized by hydrothermal process by using mixed precursor and controlled conditions. Diffused Reflectance Spectra (DRS) reveal that in addition to the expected TiO2 interband absorption below 360 nm gold surface plasmon feature occurs near 564 nm. It is shown that the dye sensitized solar cells made using TiO2-Au plasmonic nanocomposite yield superior performance with conversion efficiency (CE) of similar to 6\% (no light harvesting), current density (J(SC)) of similar to 13.2 mA/cm(2), open circuit voltage (V-oc) of similar to 0.74 V and fill factor (FF) 0.61; considerably better than that with only TiO2 nanoparticles (CE similar to 5\%, J(SC) similar to 12.6 mA/cm(2), V-oc similar to 0.70 V, FF similar to 0.56). (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Anatase TiO2, Au, Dye-sensitized solar cells, Hybrid composite, hydrothermal}, issn = {0038-092X}, doi = {10.1016/j.solener.2012.02.002}, author = {Muduli, Subas and Game, Onkar S. and Dhas, Vivek V. and Vijayamohanan, K. and Bogle, Kashinath A. and Valanoor, N. and Ogale, Satishchandra B.} } @article { ISI:000377374500003, title = {Does the position of the electron-donating nitrogen atom in the ring system influence the efficiency of a dye-sensitized solar cell? A computational study}, journal = {Journal of Molecular Modeling}, volume = {22}, number = {6}, year = {2016}, month = {JUN}, pages = {121}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

We have reported a number of new metal-free organic dyes (2-6) that have cyclic asymmetric benzotripyrrole derivatives as donor groups with peripheral nitrogen atoms in the ring, fluorine and thiophene groups as pi-spacers, and a cyanoacrylic acid acceptor group. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were employed to examine the influence of the position of the donor nitrogen atom and pi-conjugation on solar cell performance. The calculated electron-injection driving force (Delta G(inject)), electron-regeneration driving force (Delta G(regen)), light-harvesting efficiency (LHE), dipole moment (mu(normal)), and number of electrons transferred (Delta q) indicate that dyes 3, 4, and 6 have significantly higher efficiencies than reference dye 1, which exhibits high efficiency. We also extended our comparison to some other reported dyes, 7-9, which have a donor nitrogen atom in the middle of the ring system. The computed results suggest that dye 6 possesses a higher incident photon to current conversion efficiency (IPCE) than reported dyes 7-9. Thus, the use of donor groups with peripheral nitrogen atoms appears to lead to more efficient dyes than those in which the nitrogen atom is present in the middle of the donor ring system.

}, keywords = {DFT, Dye-sensitized solar cells, Organic dyes, Position effect, TD-DFT}, issn = {1610-2940}, doi = {10.1007/s00894-016-2976-2}, author = {Biswas, Abul Kalam and Barik, Sunirmal and Das, Amitava and Ganguly, Bishwajit} } @article {44642, title = {Fused fluorenylindolenine-donor-based unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {AUG}, pages = {26335-26347}, abstract = {

A series of four unsymmetrical squaraine dyes, XSQ1-4, were synthesized using a fused fluorenylindolenine-based donor unit for dye-sensitized solar cells (DSSCs). The fused structure of fluorenylindolenine helped in moving the absorption toward the near-infrared (NIR) region, and the two sp(3)-C centers available on this donor were utilized to incorporate out-of-plane alkyl chains in opposite directions to control the dye-dye interactions on the TiO2 surface. High extinction coefficient (epsilon \>= 10(5) M-1 cm(-1)) for absorbing NIR photons and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels with respect to the conduction band of TiO2 and electrolyte for charge injection and dye regeneration processes, respectively, make these dyes potential sensitizers for DSSCs. Introduction of branched alkyl groups in the pi-framework helped in controlling dye aggregation to reduce exciton quenching and assisted in TiO2 surface passivation to avoid the charge recombination process. Furthermore, having a naphthyl group on the indole part of the anchoring group containing segment helped to red-shift the absorption spectrum of dyes 15 nm toward the NIR region (XSQ3-4). Among all of the dyes under investigation, XSQ2 gave the best photovoltaic performance, having a short-circuit current density (J(SC)) of 13.99 mA cm(-2), open -circuit voltage (V-OC) of 0.66 V, and a fill factor (ff) of 0.71, with a device performance (eta) of 6.57\%. Electrochemical impedance spectroscopy revealed higher electron lifetime on TiO2 for XSQ2, which helps to avoid the charge recombination process.

}, keywords = {Dye-sensitized solar cells, fluorenylindolenine, H- and J-type aggregation, NIR absorption, out-of-plane alkyl groups, squaraine dyes}, issn = {1944-8244}, doi = {10.1021/acsami.8b09866}, author = {Bisht, Rajesh and Sudhakar, Vediappan and Kavungathodi, Munavvar Fairoos Mele and Karjule, Neeta and Nithyanandhan, Jayaraj} } @article {46421, title = {pi-Extended cis-configured unsynimetrical squaraine dyes for dye-sensitized solar cells: panchromatic response}, journal = {ACS Applied Energy Materials}, volume = {2}, year = {2019}, month = {DEC}, pages = {8464-8472}, type = {Article}, abstract = {

{Light absorbing sensitizer is the heart of the third generation photovoltaic technologies such as dye sensitized solar cells. Despite possessing large extinction coefficients for the metal-free organic dyes, the light harvesting efficiency is limited with the narrow absorption 20 profile in either visible or NIR regions of the solar spectrum. Though monolayer formation of organic sensitizers on semiconducting metal oxide surface leads to dye-dye interaction that leads to broadening the absorption profile, the contribution of the aggregated state to the power conversion process is found out to be poor. Here, we have engineered far-red active pi-extended cis-configured unsymmetrical squaraine dyes with carboxylic acid and cycnoacetic acid as anchoring groups with controlled aggregation and panchromatic light absorption by including the steric and electronic factors. The presence of sp(3)-C (out-of-plane) and N-alkyl (in-plane) groups played an important role in modulating the assembly of the dyes on the TiO2 electrode; the cis-squaraine unit helps to extend the conjugation in the NIR region besides enhancing the visible transition and the incident photon-to-current conversion efficiency profile that showed the importance of anchoring groups for the panchromatic response. Dye PSQ10 showed solar-to electric conversion with an onset of 850 nm with the device performance of 7.0\% (V-oc = 0.581 V, J(sc) = 17.06 mA/cm(2)

}, keywords = {cis-squaraine dyes, Dye aggregation, Dye-sensitized solar cells, extended far-red absorption, panchromatic response}, issn = {2574-0962}, doi = {10.1021/acsaem.9b01341}, author = {Punitharasu, Vellimalai and Kavungathodi, Munavvar Fairoos Mele and Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {46998, title = {Alkyl-group-wrapped unsymmetrical squaraine dyes for dye-sensitized solar cells: branched alkyl chains modulate the aggregation of dyes and charge recombination processes}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JAN}, pages = {2555-2565}, type = {Article}, abstract = {

Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (V-oc) and short-circuit current (J(sc)), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both J(sc) and V-oc. Hence, tailoring the factors that govern the improvement of J(sc) and V-oc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp(3)-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance V-oc from 672 (SQS1) to 718 mV (SQS6) and J(sc) from 7.95 (SQS1) to 12.22 mA/cm(2) (SQS6), with the device efficiency ranging from 3.82\% to 6.23\% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1\% (V-oc = 715 mV, J(sc) = 13.05 mA/cm(2)) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I-3(-)) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.

}, keywords = {aggregation of dye, charge injection, charge recombination, Dye-sensitized solar cells, unsymmetrical squaraines}, issn = {1944-8244}, doi = {10.1021/acsami.9b19809}, author = {Singh, Ambarish Kumar and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {46915, title = {Nanoporous reduced graphene oxide and polymer composites as efficient counter electrodes in dye-sensitized solar cells}, journal = {ACS Applied Electronic Materials}, volume = {2}, year = {2020}, month = {MAR}, pages = {626-634}, type = {Article}, abstract = {

The introduction of an efficient and precious platinum (Pt) free counter electrode (CE) for dye-sensitized solar cells (DSSCs) is an important aspect to address. In this report, we have employed nanoporous reduced graphene oxide (PG) containing PEDOT:PSS-PG composite on FTO substrate as CEs, which have shown excellent diffusion of I-3(-), remarkable photocatalytic activity, and better device performance along with desired stability. The investigated cathode material has been prepared by mixing PGs and highly conducting PEDOT:PSS. Experimental measurements and analyses such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and so on indicate that PEDOT:PSS-PG is a promising cathode material for a Pt-free CE in DSSCs. EIS indicates that the PEDOT:PSS-PGs have lower interfacial charge-transfer resistance because of their high electrical conductivity and superior electrocatalytic activity. The achieved photoconversion efficiency (eta) of a DSSC employing the Pt-free PEDOT:PSS-PG/FTO CE is 9.57\%, which is found to be comparable to that of Pt/FTO CE based DSSC (9.64\%) under a simulated solar light illumination of 100 mW/cm(2).

}, keywords = {counter electrode, Dye-sensitized solar cells, electrocatalytic activity, PEDOT:PSS, Reduced graphene oxide}, issn = {2637-6113}, doi = {10.1021/acsaelm.9b00593}, author = {Sudhakar, Vediappan and Singh, Anup Kumar and Chini, Mrinmoy Kumar} } @article {48019, title = {Indoline-based donor-pi-acceptor visible-light responsive organic dyes for dye-sensitized solar cells: co-sensitization with squaraine dye for panchromatic IPCE response}, journal = {ACS Applied Energy Materials}, volume = {5}, year = {2022}, month = {FEB}, pages = {1858-1868}, type = {Article}, abstract = {

A series of metal-free indoline-based donor-pi-acceptor (D-pi-A) visible-light active organic dyes, where an indoline unit wrapped with alkyl or alkyl and glycolic (TEG) groups is used as a donor, a mono- or bi-thiophene unit is used as a pi-spacer, and cyanoacrylic acid acts as an acceptor unit, have been designed and synthesized for dye-sensitized solar cell (DSSC) application. These dyes showed three absorption bands in a dichloromethane solution: the first and second transitions are observed in the UV (337-385 nm) and visible (477-514 nm) regions and correspond to pi-pi* and intramolecular charge transfer (ICT) transition, respectively, whereas the third absorption band obtained in the near-IR (629-758 nm) region has been observed for the first time for a D-pi-A type dye architecture. Furthermore, the ICT transition band for AKT dyes showed negative solvatochromism with increasing polarity of solvents. Photovoltaic characterizations for AKT dyes have been systematically studied with a cobalt electrolyte to evaluate the effect of thiophene incorporation and alkyl group substitution by the TEG group on the DSSC device performance. Here, AKT2 showed the highest DSSC efficiency of 3.16\% with V-OC of 0.680 V and J(SC) of 6.24 mA/cm(2) without chenodeoxycholic acid (CDCA) in the AKT dye series, whereas DSSC efficiencies for AKT dyes were not affected much upon further addition of CDCA. Furthermore, AKT dyes were co-sensitized with a complementary optical responsive indoline-based SQS4 dye and showed enhanced efficiency. The combination of AKT2/SQS4 dyes with a ratio of 1:1 showed a maximum of 5.20\% co-sensitized solar cell efficiency compared to other dye combinations with the cobalt electrolyte.

}, keywords = {Dye-sensitized solar cells, indoline-based donor-pi-acceptor dye, intramolecular charge transfer, metal-free organic dye, panchromatic-light absorption, Solvatochromism}, issn = {2574-0962}, doi = {10.1021/acsaem.1c03343}, author = {Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {49137, title = {Modular TiO2-squaraine dyes/electrolyte interface for dye-sensitized solar cells with cobalt electrolyte}, journal = {Chemphotochem}, volume = {7}, year = {2023}, month = {APR}, type = {Article}, abstract = {

Strategies to diminish both charge recombination and aggregation of dyes on the photoanode by functionalizing the sensitizer with alkyl groups is the best approach to achieve high dyesensitized solar cell (DSSC) efficiency. Development of such a photoanode with NIR-active dyes which is compatible with a cobalt electrolyte is important to enhance the photovoltaic performance. In this report, alkyl-group-wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes have been used for DSSC device characterization with a cobalt electrolyte. Surface passivation of photoanode was varied systematically by the extent of functionalization with alkyl groups to avoid charge recombination. DSSC device performance of 5.92\% was achieved for an alkyl-group-wrapped squaraine dye with a cobalt electrolyte. Hence, appending the alkyl groups on the donor unit of squaraine dyes helps passivating the photoanode, whereas introducing hydrophilic groups provides a leaky surface where oxidized electrolyte species reach the titanium-metal-oxide surface which promotes the charge recombination process.

}, keywords = {counter-electrode, DSSC device efficiency, Dye-sensitized solar cells, Electrolytes, unsymmetrical squaraine dye}, issn = {2367-0932}, doi = {10.1002/cptc.202200171}, author = {Singh, Ambarish Kumar and Sudhakar, Vediappan and Javaregowda, Bharathkumar H. and Bisht, Rajesh and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {48746, title = {Visible-light-active unsymmetrical squaraine dyes with 1 V of open-circuit voltage for dye-sensitized solar cells}, journal = {ChemPhotoChem}, volume = {7}, year = {2023}, month = {MAY}, type = {Article}, abstract = {

A series of alkyl-group-functionalized, aniline- and indoline-donor-based, unsymmetrical visible-light-active squaraine dyes, AM1-3, were designed and synthesized. Dye-sensitized solar cell (DSSC) devices were fabricated with both I-/I-3(-) and [Cu(tmby)(2)](+/2+) electrolytes. DSSC devices sensitized with the AM1 and AM2 dyes showed relatively high-power conversion efficiency of 7.44 \% and 7.22 \%, respectively with I-/I-3(-) in the absence of chenodeoxycholic acid (CDCA) than those of the AM3 dye (5.41 \%). The [Cu(tmby)(2)](+/2+) electrolyte along with poly(3,4-ethylenedioxythiophene) (PEDOT) as cathode material showed excellent open-circuit potentials (V-OC) of 1030, 1025, and 1001 mV with the DSSC efficiency of 8.05 \%, 7.96 \%, and 5.84 \%, respectively, for the AM1, AM2, and AM3 dyes in the absence of CDCA. Here, the AM1 dye exhibited the maximum DSSC efficiency of 8.05 \% and V-OC of 1030 mV, which is the highest obtained efficiency and V-OC for the visible-light active zwitterionic unsymmetrical-squaraine dye with copper-based electrolyte.

}, keywords = {Cu electrolytes, dihedral angle, Dye-sensitized solar cells, open circuit voltage, squaraine dyes}, issn = {2367-0932}, doi = {10.1002/cptc.202200328}, author = {Singh, Amrita and Kumar Singh, Ambarish and Dixit, Ruchi and Vanka, Kumar and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {49283, title = {Triazatruxene amine donor-based visible-light-responsive unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Energy Materials}, volume = {7}, year = {2024}, month = {SEP}, pages = {7982-7991}, type = {Article}, abstract = {

Optimized charge-transfer dynamics at the dye-TiO2/electrolyte interface are required for an enhanced dye-sensitized solar cell (DSSC) device performance. Such an optimized interface enhances the charge-injection, dye-regeneration, and diminished charge-recombination processes, synergistically enhancing the device efficiency. In this study, octupolar-structured sensitizers are designed to improve the interaction between the dye and the redox electrolyte for increasing the dye-regeneration process upon photoexcitation. Accordingly, a set of unsymmetrical squaraine dyes with indoline and triazatruxene amine donor-based D-A-D dyes are designed (KV1-KV3), synthesized, and sensitized with a semiconducting metal oxide (TiO2) film. The sensitizer forms a monolayer on the TiO2 surface, leading to a dye-dye interaction, which broadens the absorption spectrum. The N atom of the triazatruxene amine donor was left unsubstituted in KV1, whereas a hexyl chain was installed in KV2 and KV3 and a branched alkyl chain was installed on the core N atoms in KV3 to control the self-assembly of dyes on the TiO2 surface. Self-assembly of alkyl groups wrapped in KV1-KV3 dyes on the TiO2 surface aids surface passivation and broadens the absorption profile, improving the light-harvesting capabilities. The DSSC devices based on KV2 exhibited a high power conversion efficiency of 7.85\% (V-oc = 794 mV, J(sc) = 14.76 mA/cm(2), and FF = 67\%), with an onset incident photon-to-current conversion efficiency response from 680 nm.

}, keywords = {aggregationof dyes, Dye-sensitized solar cells, metal-free organic dyes, self-assembly of dye, squaraine dyes, triazatruxene}, issn = {2574-0962}, doi = {10.1021/acsaem.4c01591}, author = {Ingole, Kiran Balaso and Deshmukh, Shivdeep Suresh and Verma, Tushar Singh and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {49614, title = {Double anchoring squaraine dye with triazatruxene amine donor for dye-sensitized solar cells: sequential cosensitization for panchromatic light-harvesting}, journal = {Journal of Photochemistry and Photobiology A-Chemistry}, volume = {462}, year = {2025}, month = {MAY}, pages = {116229}, type = {Article}, abstract = {

Dyes are firmly bound to a semiconducting TiO2 film using carboxylic acid anchoring groups for an efficient electron transfer from the excited state of dye to the conduction band (CB) of TiO2. Strong dye binding can be accomplished with multi-anchoring dye designs to improve photophysical characteristics, including high extinction coefficients, panchromatic absorption, post-sensitization modifications, and dark current suppression, besides enhancing the stability of the dye-TiO2 interface. Herein, a novel KV2D dye with double squaraine acceptor and double carboxylic acid anchoring groups is designed to achieve a high extinction coefficient (epsilon, 3.57 x 105M-1cm-1) and robust binding to the TiO2 film for an effective electron transfer. We systematically changed the amount of coadsorbent chenodeoxycholic acid (CDCA) to control the aggregation of dyes on the TiO2 surface that improves the power conversion efficiency (PCE, eta) for the devices based on the doubleanchoring KV2D. Out of these devices, KV2D: CDCA (1:10) based cell exhibited the best PCE of 5.26\% with VOC of 754 mV, JSC of 10.41 mA/cm2, and ff of 67\%. The sequential cosensitization studies were carried out with a far-red active dye to find the effect of the strong binding of the sensitizer to the TiO2 film. Interestingly, when di-anchoring, KV2D was sensitized first for 12 h and then sequentially cosensitized with far-red absorbing SQS4 for 5 h to achieve a PCE of 5.0\% with VOC of 697 mV, JSC of 10.23 mA/cm2, and ff of 70\% with panchromatic spectral response in IPCE upto 730 nm giving higher photocurrent generation.

}, keywords = {aggregation of dyes, Bulky donor unit, Double acceptor dye, Dye-sensitized solar cells, self-assembly of dye, squaraine dyes, triazatruxene}, issn = {1010-6030}, doi = {10.1016/j.jphotochem.2024.116229}, author = {Ingole, Kiran Balaso and Siby, Jesna and Pandya, Rinu and Vanka, Kumar and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {49516, title = {Effect of cyclization and alkyl group wrapping in visible-light-active unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Energy Materials}, volume = {8}, year = {2025}, month = {APR }, pages = {5017-5030}, type = {Article}, abstract = {

A series of alkyl group-appended indoline- and carboxylic acid-functionalized indolenine-based visible-light-active unsymmetrical squaraine dyes, SQA7-10, were designed, synthesized, and utilized for the dye-sensitized solar cells device fabrication. The number of alkyl group has been increased systematically on the indoline moiety to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open-circuit voltage (V-OC) by avoiding the charge recombination process. SQA7-10 dyes showed an absorption between lambda(max) 536-540 nm, with molar extinction coefficients of 1.62-2.13 x 10(5) M-1 cm(-1) in CH3CN. Further, ultraviolet-visible (UV-vis) studies on TiO2 indicated the formation of H-aggregated dyes (505-510 nm), which can be controlled by appending the alkyl groups. The energy levels of the highest occupied molecular orbital (HOMO) of these dyes are well aligned with the Nernst potentials of I-/I(3)(-)electrolyte and [Cu(tmby)(2)](+/2+) electrolytes with sufficient overpotentials required for the dye regeneration process. DSSC devices made with these dyes showed systematic enhancements of open-circuit voltage (V-OC) and device efficiency with respect to alkyl group incorporation for SQA7-10 with I-/I-3(-) electrolytes. All of the SQA dyes exhibited the device V-OC of more than 805 mV, where the introduction of alkyl groups systematically enhanced the V-OC in the order of SQA7 (805 mV) \< SQA8 (829 mV) \< SQA9 (843 mV) \< SQA10 (862 mV) without any addition of CDCA. Within the SQA dye series, SQA10 dye has achieved the highest DSSC device efficiency of 7.52\% (J(sc) of 11.16 mA/cm(2), V-oc of 862 mV, and ff of 78\%) with I-/I-3(-) electrolyte, whereas use of [Cu(tmby)(2)](+/2+) redox shuttle with SQA10 showed enhanced V-oc (1080 mV) and device efficiency (8.35\%). The IPCE profile for the device fabricated with SQA dyes showed good response at 480 and 560 nm, which indicates the photocurrent generation from the aggregated structures.

}, keywords = {aggregation of dyes, charge recombination, Dye-sensitized solar cells, indoline and indolenine donors, visible-light-activeunsymmetrical squaraine dye}, issn = {2574-0962}, doi = {10.1021/acsaem.4c03116}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Shivankar, Bhavana R. and Siby, Jesna and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} }