@article { ISI:000227046400028, title = {Preparation and characterization of composite electrodes of coconut-shell-based activated carbon and hydrous ruthenium oxide for supercapacitors}, journal = {Journal of Power Sources}, volume = {141}, number = {1}, year = {2005}, month = {FEB}, pages = {198-203}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The relationship between the structure-specific capacitance (F g(-1)) of a composite electrode consisting of activated coconut-shell carbon and hydrous ruthenium oxide (RuOx(OH)(y)) has been evaluated by impregnating various amounts of RuOx(OH)(y) into activated carbon that is specially prepared with optimum pore-size distribution. The composite electrode shows an enhanced specific capacitance of 250 F g(-1) in 1 M H2SO4 with 9 wt.\% ruthenium incorporated. Chemical and structural characterization of the composites reveals a homogeneous distribution of amorphous RuOx(OH)(y) throughout the porous network of the activated carbon. Electrochemical characterization indicates an almost linear dependence of capacitance on the amount of ruthenium owing to its pseudocapacitive nature. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {activated carbon, Composite, Electrochemical characterization, pseudocapacitance, specific capacitance, supercapacitor}, issn = {0378-7753}, doi = {10.1016/j.powsour.2004.09.008}, author = {Dandekar, M. S. and Arabale, G. and Vijayamohanan, K.} } @article { ISI:000278307300007, title = {Influence of filler size and morphology in controlling the thermal emissivity of aluminium/polymer composites for space applications}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {168}, number = {1-3, SI}, year = {2010}, note = {Conference on Specialty Advanced Materials and Polymers for Aerospace and Defense and Applications (SAMPADA-2008), Mat Res Soc Singapore, Singapore, SINGAPORE, JUL 03-08, 2005}, month = {APR}, pages = {40-44}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The paper has addressed the problem of controlling the thermal emissivities from metal/polymer composites prepared by solution method. Aluminium is used as a filler and polystyrene as a polymer-matrix. Aluminium particles, with micrometer and nanometer dimensions having different morphologies, were employed. The values of emissivities were reduced when the coarse grains and flakes of aluminium were used as fillers, whereas, no significant change was observed when nano-aluminium was used in the composite. Dielectric dispersion for the composites was measured and the results are analysed in view of Fresnel relation. The differences in the values of dielectric constants, between the experimentally measured and those which can be predicted theoretically, are thought to arise from the interfacial polarization. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Camouflaging, Composite, dielectric constant, Infra-red, Thermal emissivity}, issn = {0921-5107}, doi = {10.1016/j.mseb.2009.11.009}, author = {Babrekar, Harshada A. and Kulkarni, Naveen V. and Jog, Jyoti Prakash and Mathe, Vikas L. and Bhoraskar, S. V.} } @article { ISI:000305714200033, title = {Alginate and hydrotalcite-like anionic clay composite systems: synthesis, characterization and application studies}, journal = {Microporous and Mesoporous Materials}, volume = {158}, year = {2012}, month = {AUG}, pages = {241-246}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydrotalcite-like anionic clays (Zn/Al and Mg/Al) were intercalated with sodium alginate to form organic-inorganic composite adsorbents for water treatment applications. The synthesized composites were characterized using different characterization techniques viz. XRD, DRIFTS, SEM and surface area/porosity analysis. The adsorption potential of the alginate-clay composites was examined for removal of fluoride ions and Orange II dye from water by adsorption. Our studies revealed that these composites had high adsorption capacity for the adsorption of fluoride and Orange II dye from aqueous solutions. The adsorption capacity of the composites was considerably higher than that of either alginate or clay, used individually. The results indicated that these materials might be useful sorbents for groundwater purification/effluent treatment. (C) 2012 Elsevier Inc. All rights reserved.

}, keywords = {Alginate, Anionic clay, Composite, Fluoride, Orange II dye}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2012.03.046}, author = {Mandal, Sujata and Patil, Varsha S. and Mayadevi, S.} } @article { ISI:000315306200009, title = {Effect of clay and of electrospinning on the polymorphism, structure and morphology of poly(vinylidene fluoride)}, journal = {European Polymer Journal}, volume = {49}, number = {1}, year = {2013}, month = {JAN}, pages = {90-99}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Electrospun poly(vinylidene fluoride) (PVDF) fibers, containing different amounts of montmorillonite clay were produced, in order to study the effect of clay and of the electrospinning process on the polymorphism, structure and morphology of the PVDF matrix, Clay acted as a processing aid agent, avoiding the formation of beads and improving the quality of the fibers. Clay and the electrospinning process acted synergically on the chain mobility, favoring the formation of beta phase of PVDF, the most valuable for its piezoelectric properties, and shaping its semicrystalline morphology. Electrospinning did not significantly aid the dispersion of clay within the matrix. The interplay of formulation and processing in these composites allowed to obtain PVDF-based materials with varying polymorphism, structure and morphology, offering the possibility to ultimately control their functional properties. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Composite, electrospinning, Poly(vinylidene fluoride), Polymer, polymorphism, SAXS}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2012.09.023}, author = {Neppalli, Ramesh and Wanjale, Santosh and Birajdar, Mallinath S. and Causin, Valerio} } @article {43806, title = { Design and development of trivalent aluminum ions induced self healing polyacrylic acid novel hydrogels}, journal = {POLYMER}, volume = {126}, year = {2017}, month = {SEP}, pages = { 196-205}, type = {Journal Article}, chapter = {196-205}, abstract = {

Development of ionically crosslinked superabsorbent polyacrylic acid (PAA) self-healing hydrogels using trivalent aluminum ions was investigated. The PAA hydrogels exhibited excellent self-healing behavior depending on the amount of the aluminum within the matrix. The migration of these ions within the polymer matrix was responsible for the physical crosslinking of the hydrogel and the origin of self healing ability. The PAA-Al hydrogels were insoluble in water and exhibited significantly high degree of swelling (similar to 4000\%). Hydrogel also exhibited good mechanical properties with high level of elongation. Excellent self-healing efficiency was observed under dynamic as well as oscillatory Theological measurements. The presence of Al ions within PAA hydrogel facilitated the self-healing ability because of the ionic interaction in these gels which plays the key role of dynamic reversible sacrificial bonds which reforms upon reversal of the deformative force. (C) 2017 Elsevier Ltd. All rights reserved.

}, keywords = {Aluminum chloride, Behavior, Complex, Composite, crosslinking, Delivery, High-Mechanical Strength, hydrogels, Network, Polyacrylic acid, Polymeric Materials, Self-healing, swelling, Tough; pH}, issn = {0032-3861}, doi = {10.1016/j.polymer.2017.08.045}, author = {Anjum, Sadiya and Gurave, Pramod and Badiger, Manohar V. and Tiwari, Neha and Gupta, Bhuvanesh} } @article {46789, title = {Nanocellulose reinforced flexible composite nanogenerators with enhanced vibrational energy harvesting and sensing properties}, volume = {2}, year = {2020}, month = {JUL}, pages = {2550-2562}, type = {Article}, abstract = {

We report here enhanced vibration and pressure sensing properties of nanocellulose reinforced flexible composite piezoelectric nanogenerators (PENGs). Surface fluorinated nanocellulose crystals (FNC) were incorporated into poly(vinylidene fluoride) (PVDF) and electrospun into composite nanofibers. Incorporation of only 2 wt \% FNC in PVDF resulted in a significant enhancement in pressure sensitivity with a very low detectable pressure limit of 10 Pa and a sensitivity of up to 18 mV/kPa. The composite PENGs also demonstrated very high sensitivity for forced continuous vibrations. 2FNC/PVDF composites resulted in an order of magnitude higher voltage response over neat PVDF for a given strain. When PENGs were mounted on a vacuum pump for transduction of mechanical vibrations into electrical energy, 2FNC/PVDF composite devices manifested similar to 3.8 times enhanced voltage output over neat PVDF and faster charging of a capacitor. The enhanced piezoelectric properties of PVDF/FNC nanocomposites could be attributed to the tailored interface between PVDF and nanocellulose and enhanced polarizability.

}, keywords = {Composite, Nanofiber, piezoelectric, pressure, Sensor, vibration}, issn = {2637-6105}, doi = {10.1021/acsapm.0c00158}, author = {Ram, Farsa and Gudadhe, Aniket and Vijayakanth, Thangavel and Aherrao, Swapnil and Borkar, Vivek and Boomishankar, Ramamoorthy and Shanmuganathan, Kadhiravan} } @article {48790, title = {Luminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties}, journal = {Polymer Engineering and Science}, volume = {63}, year = {2023}, month = {JUL}, pages = {2059-2072}, type = {Article}, abstract = {

The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt\% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt\% thermoplastic polyurethane (TPU) into PLA led to 223\% increase in toughness and 21\% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35\%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.

}, keywords = {3D printing, Composite, fluorescence, Nanocellulose, poly(lactic acid), toughness}, issn = {0032-3888}, doi = {10.1002/pen.26345}, author = {Kothavade, Premkumar Anil and Yadav, Prashant and Nidhankar, Aakash D. and Torris, Arun and Pol, Harshawardhan and Kafi, Abdullah and Bateman, Stuart and Sukumaran, Santosh Babu and Shanmuganathan, Kadhiravan} }