@article { ISI:000234644600023, title = {Hydrothermal synthesis of MCM-41 using differently manufactured amorphous dioxosilicon sources}, journal = {Materials Letters}, volume = {60}, number = {7}, year = {2006}, month = {APR}, pages = {957-961}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The influence of differently manufactured amorphous dioxosilicon sources such as fumed silica (FS), spray dried precipitated silica (PSI) and flash dried precipitated silica (PS,) on the course of structural development and properties of hydrothermally prepared siliceous MCM-41 phases have been investigated. Powder XRD, N-2 adsorption/desorption and scanning electron microscopy techniques were used for sample characterization. On the basis of results obtained from time dependent study on the progressive development of MCM-41 mesophases, the reactivity trend of dioxosilicon sources observed was as: FS \> PS1 \> PS2. MCM-41 synthesized using least expensive PS2 having less surface area has exhibited thicker pore walls but poor orderness, while MCM-41 prepared from expensive FS having high surface area has thinner pore walls and was well ordered. The extent of contraction caused by calcination, magnitude of the wall thickness and structural stability were found to be dependent on manufacturing process of dioxosilicon sources. The noticeable morphological differences were also observed by variations in the type of dioxosilicon sources used in the hydrothermal synthesis MCM-41 materials. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Characterization, dioxosilicon sources, Hydrothermal synthesis, MCM-41, porosity, Structural stability}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.10.049}, author = {Gaydhankar, T. R. and Samuel, V. and Joshi, P. N.} } @article { ISI:000265237700014, title = {Synthesis, characterization and catalytic performance of Sn-MCM-48 in solvent-free Mukaiyama-type aldol condensation reactions}, journal = {Applied Catalysis A-General}, volume = {358}, number = {1}, year = {2009}, month = {APR}, pages = {88-94}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The influence of various synthesis variables on the physico-chemical properties of mesoporous stannosilicate molecular sieves with MCM-48 structure (Sn-MCM-48) has been investigated. Sn-MCM48 has been used as a new heterogeneous catalyst in solvent-free Mukaiyama-type aldol reactions. Invariably, the beta-hydroxy ester selectivity was found to be 100\% irrespective of the conversion level. The product yield was found to increase, to reach a maximum (70\%), and then to decrease with the increase in tin content. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Characterization, heterogeneous catalysis, Hydrothermal synthesis, Mesoporous molecular sieves, Mukaiyama-aldol condensation, Sn-MCM-48}, issn = {0926-860X}, doi = {10.1016/j.apcata.2009.02.001}, author = {Taralkar, U. S. and Kalita, Pranjal and Kumar, Rajiv and Joshi, P. N.} } @article { ISI:000334984000005, title = {Methane reforming with carbon dioxide over La-Ni-x-Ce1-x mixed oxide catalysts}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {53}, number = {4-5, SI}, year = {2014}, month = {FEB}, pages = {478-483}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

La-Ni-x-Ce1-x mixed oxide (0 \<= x \<= 1) catalysts have been hydrothermally prepared, characterized by physico-chemical techniques and evaluated for CO2 reforming of methane. High conversions are achieved for both methane and carbon dioxide over the LaNi0.6Ce0.4O3 catalyst tested under the conditions of CO2/CH4/N-2 ratio of 80/80/80. (total flow rate = 240 mL/min), space velocity of 28,800 h(-1) and at a temperature of 800 degrees C. The H-2/CO ratio in the syngas is stable at 0.93 +/- 0.02. Exchanging Ni with Ce, rather than with La as reported in the literature, appears to be a better option for the improved performance of the catalysts.

}, keywords = {Carbon dioxide reforming, Catalysts, Cerium, Dry reforming, Hydrothermal synthesis, Lanthanum, Methane reforming, Mixed oxides, Nickel}, issn = {0376-4710}, author = {Sagar, T. V. and Sreelatha, N. and Hanmant, G. and Upendar, K. and Lingaiah, N. and Rao, Kamaraju Seetha Rama and Satyanarayana, C. V. V. and Reddy, I. A. K. and Prasad, P. S. Sai} } @article {45724, title = {Environmentally benign bioderived carbon microspheres-supported molybdena nanoparticles as catalyst for the epoxidation reaction}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {5}, year = {2017}, month = {JAN}, pages = {904-910}, type = {Article}, abstract = {

A one pot synthesis of molybdenum oxide nanoparticles (NPs supported on bioderived carbon microspheres is reported. The catalyst was synthesized by the low temperature hydrothermal (LTH) method using D-glucose and bagasse as the carbon source. The carbonization of bagasse resulted in the formation of nonuniform carbon microspheres while glucose resulted in uniform carbon spheres. SEM and STEM elemental mapping show the uniform distribution of molybdenum oxide NPs over the carbon microspheres. XPS spectroscopy confirmed that molybdenum was in the Mo6+ oxidation state. The 1\% MoO3 supported on carbon microspheres derived from D-glucose showed excellent catalytic activity up to 100\% olefin conversion with 100\% epoxide selectivity using organic tent-butyl hydroperoxide as an oxidant. The catalyst was successfully used for up to five cycles without losing substantial activity and selectivity.

}, keywords = {Carbon microspheres, epoxidation, heterogeneous catalysis, Hydrothermal synthesis, TBHP}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.6b02229}, author = {Doke, Dhananjay S. and Umbarkar, Shubhangi B. and Gawande, Manoj B. and Zbori, Radek and Biradar, Ankush V.} } @article {48935, title = {Active site engineering and theoretical aspects of {\textquoteleft}{\textquoteleft}Superhydrophilic{\textquoteright}{\textquoteright} nanostructure array enabling efficient overall water electrolysis}, journal = {Small}, volume = {19}, year = {2023}, month = {DEC}, type = {Article}, abstract = {

The rational design of noble metal-free electrocatalysts holds great promise for cost-effective green hydrogen generation through water electrolysis. In this context, here, the development of a superhydrophilic bifunctional electrocatalyst that facilitates both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline conditions is demonstrated. This is achieved through the in situ growth of hierarchical NiMoO4@CoMoO4 center dot xH(2)O nanostructure on nickel foam (NF) via a two-step hydrothermal synthesis method. NiMoO4@CoMoO4 center dot xH(2)O/NF facilitates OER and HER at the overpotentials of 180 and 220 mV, respectively, at the current density of 10 mA cm(-2). The NiMoO4@CoMoO4 center dot xH(2)O/NF parallel to NiMoO4@CoMoO4 center dot xH(2)O/NF cell can be operated at a potential of 1.60 V compared to 1.63 V displayed by the system based on the Pt/C@NF parallel to RuO2@NF standard electrode pair configuration at 10 mA cm(-2) for overall water splitting. The density functional theory calculations for the OER process elucidate that the lowest Delta G of NiMoO4@CoMoO4 compared to both Ni and NiMoO4 is due to the presence of Co in the OER catalytic site and its synergistic interaction with NiMoO4. The preparative strategy and mechanistic understanding make the windows open for the large-scale production of the robust and less expensive electrode material for the overall water electrolysis.

}, keywords = {density functional theory (DFT) study, hydrogen evolution reaction (HER), Hydrothermal synthesis, oxygen evolution reaction (OER), superhydrophilic nanostructures, synergistic interaction, water electrolysis}, issn = {1613-6810}, doi = {10.1002/smll.202304143}, author = {Barik, Sidharth and Kharabe, Geeta Pandurang and Illathvalappil, Rajith and Singh, Chandrodai Pratap and Kanheerampockil, Fayis and Walko, Priyanka S. and Bhat, Suresh K. and Devi, R. Nandini and Vinod, C. P. and Krishnamurty, Sailaja and Kurungot, Sreekumar} }