@article { ISI:000236691000034, title = {Reverse microemulsion mediated sol-gel synthesis of lithium silicate nanoparticles under ambient conditions: Scope for CO2 sequestration}, journal = {Chemical Engineering Science}, volume = {61}, number = {10}, year = {2006}, month = {MAY}, pages = {3415-3418}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We report on the synthesis of nanocrystalline lithium silicate by coupling of sol-gel method in reverse microemulsion. The sample calcined at 800 degrees C gives pure phase lithium metasilicate nanocrystallites. X-ray diffraction and transmission electron microscopy confirmed the formation of nanocrystalline lithium silicate particles with a narrow size distribution. The nanoparticle prepared in the microemulsion shows enhanced CO2 sorption capacity and shorter retention times at higher temperature (similar to 131 ml/g at STP at 610 degrees C which are better than the best known results. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Adsorption, Carbon dioxide, Microemulsion, particle, separations, sol-gel, surfactant}, issn = {0009-2509}, doi = {10.1016/j.ces.2005.11.065}, author = {Khomane, Ramdas B. and Sharma, B. K. and Saha, S. and Kulkarni, B. D.} } @article {Hung, title = {Synthesis of Bio-diesel and Bio-lubricant by transesterification of vegetable oil with lower and higher alcohols over heteropolyacids supported by clay (K-10)}, journal = {Process Safety and Environmental Protection}, volume = {85}, number = {B5}, year = {2007}, note = {Theoretical Chemistry Symposium 2006 (TCS 2006), Bharathidasan Univ, Trichy, INDIA, DEC 11-13, 2006}, month = {SEP}, pages = {372-377}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

{The use of different lower and higher alcohols viz; methanol, ethanol, n-propanol and n-octanol, for the synthesis of methyl, ethyl, propyl and octyl fatty acid esters by transesterification of vegetable oil (triglycerides) with respective alcohols also known as {\textquoteleft}Bio-diesel{\textquoteright} and {\textquoteleft}Biolubricants{\textquoteright} was studied in detail. The reactions were carried out in a batch process. The activity with different supports like clay (K-10), activated carbon, ZSM-5, H-beta and TS-1 were compared. The superacids (heteropolyacids, HPA) viz; Dodeca-Tungstophosphoric acid [

}, keywords = {coprecipitation, lithium aluminate, Microemulsion, Nanoparticles, sol-gel, Surfactants}, issn = {0167-577X}, author = {Bokade, Vijay V. and Yadav, G. D.} } @article { ISI:000255292000009, title = {Photocatalytic activity and characterization of sol-gel-derived Cr(III)-doped TiO(2)-coated active carbon composites}, journal = {Philosophical Magazine}, volume = {88}, number = {5}, year = {2008}, month = {APR}, pages = {767-779}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Cr(III)-doped, TiO(2)-coated active carbon (Cr-TiO(2)/AC) were prepared by a sol-gel method. The effect of supports, including TiO(2) and active carbon (AC), on the molecular structure and photocatalytic activity of chromium oxide for complete decomposition of EDTA has been examined with respect to the content of Cr on the catalyst surface. The photocatalytic activity of the Cr-TiO(2)/AC composites was evaluated in the decomposition of EDTA solution under UV irradiation. The results indicate that Cr-TiO(2)/AC has a higher efficiency in decomposition of EDTA than TiO(2), TiO(2)/AC or active carbon. This was attributed to the different functions of active carbon and chromate species. (1) Nanosize TiO(2) particles on composites were not reunited, possible because active carbon retards transformation of anatase into rutile and decreases the crystallite size. (2) Production of high concentrations of organic compound near Cr-TiO(2). (3) Carbon in active carbon causes some of the TiO(2) to reduce to Ti(3+) ions, which prevents electron-hole pair recombination. (4) Formation of polychromate species, with a stronger redox capability, on the surface of TiO(2)/AC. It was found that the addition of Cr to TiO(2) sol could suppress the grain growth of TiO(2) crystals and increase the hydroxyl content on the surface of TiO(2)/AC. The photocatalytic efficiency and activity of the composites remained good, even after three cycles.

}, keywords = {EDTA, photoactive, sol-gel, Titanium dioxide, XPS}, issn = {1478-6435}, doi = {10.1080/14786430801955261}, author = {Gambhire, A. B. and Lande, Machhindra K. and Mandale, A. B. and Patil, K. R. and Arbad, B. R.} } @article { ISI:000263070700020, title = {Enhanced solar-radiation induced photocatalytic activity of surface-modified nanocrystalline anatase-titania}, journal = {Catalysis Letters}, volume = {128}, number = {1-2}, year = {2009}, month = {MAR}, pages = {137-143}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Sol-gel derived pure nanocrystalline (similar to 20-30 nm) anatase-titania has been surface-modified by depositing silver(I) oxide and silver (predominantly the former) via UV-reduction process. The pure and surface-modified nanocrystalline anatase-titania have been characterized using different analytical techniques for determining the average nanocrystallite size, phase-contents, surface-chemistry, as well as the absorption and photoluminescence characteristics. It is demonstrated that, the latter exhibits an enhanced solar-radiation induced photocatalytic activity as compared to that of the former as a result of the absorption in the visible-region and enhanced photo-induced e(-)/h(+) life-time, both caused by the surface-deposition of silver(I) oxide and silver.

}, keywords = {Nanocrystalline, Photocatalysis, Silver, sol-gel, titania, UV-reduction}, issn = {1011-372X}, doi = {10.1007/s10562-008-9704-1}, author = {Priya, R. and Baiju, K. V. and Shukla, S. and Biju, S. and Reddy, M. L. P. and Patil, K. R. and Warrier, K. G. K.} } @article { ISI:000264925400047, title = {Novel electroless process for copper coating of flyash using titania/ultraviolet-radiation/metal catalyst-system}, journal = {Applied Surface Science}, volume = {255}, number = {13-14}, year = {2009}, month = {APR}, pages = {6696-6704}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel electroless process has been demonstrated in this investigation to coat the surface of flyash particles with a conducting metal such as copper. The conventional electroless process has been modified for this purpose by replacing the tin-palladium catalyst-system with the titania/ultraviolet-radiation/metal catalyst-system, where the metal is either copper or silver as demonstrated here. The mechanism of copper coating of flyash particles in an electroless bath, using the novel methods of surface-sensitization and surface-activation, has been systematically studied by monitoring changes in the surface-morphology, surface-chemistry, and surface-structure of flyash particles using the scanning electron microscope, energy dispersive analysis of X-rays, X-ray photoelectron spectroscope, and X-ray diffraction. It has been revealed that the novel electroless method involves coating the flyash particles with titania photocatalyst via sol-gel, which acts as a surface-sensitizer under the ultraviolet-radiation exposure for the subsequent surface-activation with the copper- or silver-clusters. The latter in turn acts as surface-catalyst for the subsequent Cu-coating in an electroless bath. The proposed mechanism of surface-sensitization and surface-activation of flyash particles using the novel catalyst-system has been compared with that using the conventional catalyst-system. (C) 2009 Elsevier B. V. All rights reserved.

}, keywords = {Copper, Electroless, Flyash, Photocatalysis, sol-gel, titania}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2009.02.066}, author = {Shijitha, T. and Baiju, K. V. and Shukla, S. and Patil, K. and Warrier, K. G. K.} } @article { ISI:000299332500004, title = {Sodium-doped lithium zirconate nano squares: synthesis, characterization and applications for CO2 sequestration}, journal = {Journal of Sol-Gel Science and Technology}, volume = {61}, number = {2}, year = {2012}, month = {FEB}, pages = {316-320}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Nano squares of sodium-doped lithium zirconate have been synthesized by a simple citrate based sol-gel method at room temperature in the presence of cetyl trimethylammonium bromide (CTAB) as a surfactant. The structural and morphological properties were investigated by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) respectively. XRD analysis of sample calcined at 900 A degrees C for 4 h shows the formation of monoclinic lithium zirconate phase. The TEM shows the interesting morphology of formation of nano squares of sodium doped lithium zirconate sample. The carbon dioxide sorption capacity was carried out by TGA analysis at different high temperatures. It is observed that the sample shows similar to 20 wt\% carbon dioxide sorption at higher temperature (650 A degrees C) within 20 min which are better than the known reports.

}, keywords = {Carbon dioxide, CTAB, Lithium zirconate, Sodium doped lithium zirconate, sol-gel, TEM, XRD}, issn = {0928-0707}, doi = {10.1007/s10971-011-2629-y}, author = {Khokhani, Mrinal and Khomane, Ramdas B. and Kulkarni, Bhaskar D.} } @article { ISI:000341544200034, title = {Sol-gel assisted fabrication of collagen hydrolysate composite scaffold: a novel therapeutic alternative to the traditional collagen scaffold}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {17}, year = {2014}, month = {SEP}, pages = {15015-15025}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Collagen is one of the most widely used biomaterial for various biomedical applications. In this Research Article, we present a novel approach of using collagen hydrolysate, smaller fragments of collagen, as an alternative to traditionally used collagen scaffold. Collagen hydrolysate composite scaffold (CHCS) was fabricated with sol-gel transition procedure using tetraethoxysilane as the silica precursor. CHCS exhibits porous morphology with pore sizes varying between 380 and 780 mu m. Incorporation of silica conferred CHCS with controlled biodegradation and better water uptake capacity. Notably, 3T3 fibroblast proliferation was seen to be significantly better under CHCS treatment when compared to treatment with collagen scaffold. Additionally, CHCS showed excellent antimicrobial activity against the wound pathogens Staphylococcus aureus, Bacillus subtilis, and Escherichia coli due to the inherited antimicrobial activity of collagen hydrolysate. In vivo wound healing experiments with full thickness excision wounds in rat model demonstrated that wounds treated with CHCS showed accelerated healing when compared to wounds treated with collagen scaffold. These findings indicate that the CHCS scaffold from collagen fragments would be an effective and affordable alternative to the traditionally used collagen structural biomaterials.

}, keywords = {collagen, collagen hydrolysate, scaffold, sol-gel, tissue engineering, wound Healing}, issn = {1944-8244}, doi = {10.1021/am502948g}, author = {Ramadass, Satiesh Kumar and Perumal, Sathiamurthi and Gopinath, Arun and Nisal, Anuya and Subramanian, Saravanan and Madhan, Balaraman} } @article {46669, title = {Enhanced photoelectrochemical cell performance of Co doped ZnO nanoparticles sensitized by affordable mixed dyes as sensitizer}, journal = {Inorganic and Nano-Metal Chemistry}, volume = {51}, year = {2021}, month = {SEP}, pages = {1258-1271}, type = {Article}, abstract = {

In the present investigation, a simple sol-gel approach has been employed for the synthesis of hexagonal wurtzite ZnO nanoparticles (NPs). X-ray diffraction (XRD) rietveld study and Raman analysis reveal the mislaid of the mixed phases of ZnO NPs after doping. The scanning electron micrographs and transmission electron microscopy confirm the formation of hexagonal disk-shaped NPs. FTIR, PL, EDX, XPS validate optical and stoichiometric concentration of Co in ZnO lattice. UV-visible DRS study shows absorption edge with humps to the red region of the spectrum with increasing the absorption strength and shortening of band gap as the content of Co (II) increases. Finally, the prepared samples were coated on the surface of cleaned FTO substrate through a simple doctor blade technique and sensitized with prepared dye. The ZnO photoanode shows 0.036\% of efficiency (eta\%) while the photoanodes of Co doped samples expose the enhanced efficiencies of 0.29\%, 0.389\%, 0.089\%.

}, keywords = {Co doped ZnO, mixed dyes as sensitizer, Photoelectrochemical cell, sol-gel}, issn = {2470-1556}, doi = {10.1080/24701556.2020.1835963}, author = {Kumbhar, Deepak and Kumbhar, Sarita and Dhodamani, Anant and Delekar, Sagar and Harale, Namdev and Nalawade, Rekha and Nalawade, Avinash} }