@article { ISI:000331624700039, title = {Chitosan and chitosan-co-poly(epsilon-caprolactone) grafted multiwalled carbon nanotube transducers for vapor sensing}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {14}, number = {3}, year = {2014}, month = {MAR}, pages = {2425-2435}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Vapor sensitive transducer films consisting of chitosan grafted (CNT-CS) and chitosan-co-polycaprolactone grafted (CNT-CS-PCL) multiwalled carbon nanotubes were prepared using a spray layer-by-layer technique. The synthesized materials (CNT-CS and CNT-CS-PCL) were characterized by Fourier transform infrared spectroscopy, C-13 CP/MAS solid state nuclear magnetic resonance spectroscopy and thermogravimetric analysis. Both CNT-CS and CNT-CS-PCL transducers were analyzed for the response of volatile organic compounds and toluene vapors. The ranking of the relative resistance (A(r)) for both chitosan based transducers were as follows: toluene \< chloroform \< ethanol \< methanol. The CNT transducer (CNT-CS) was correlated selectively with an exponential law to the inverse of Flory-Huggins interaction parameters, chi(12). Dosing the films on the interdigitated electrodes with methanol, ethanol, chloroform and toluene vapors increased the film resistance of CNT-CS but decreased the resistance of CNT-CS-PCL compared to that of the reported transducers.

}, keywords = {Biocompatibility, Chitosan, MWCNTs, Poly(epsilon-caprolactone), Vapour Sensing}, issn = {1533-4880}, doi = {10.1166/jnn.2014.8498}, author = {Rana, Vijay Kumar and Akhtar, Shamim and Chatterjee, Sudipta and Mishra, Satyendra and Singh, Raj Pal and Ha, Chang-Sik} } @article { ISI:000353831200020, title = {Electrochemical preparation of nitrogen-doped graphene quantum dots and their size-dependent electrocatalytic activity for oxygen reduction}, journal = {Bulletin of Materials Science}, volume = {38}, number = {2}, year = {2015}, month = {APR}, pages = {435-442}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Here we report a remarkable transformation of nitrogen-doped multiwalled carbon nanotubes (MWCNTs) to size selective nitrogen-doped graphene quantum dots (N-GQDs) by a two-step electrochemical method. The sizes of the N-GQDs strongly depend on the applied anodic potential, moreover increasing potential resulted in a smaller size of N-GQDs. These N-GQDs display many unusual size-dependant optoelectronic (blue emission) and electrocatalytic (oxygen reduction) properties. The presence of N dopants in the carbon framework not only causes faster unzipping of MWCNTs but also provides more low activation energy site for enhancing the electrocatalytic activity for technologically daunting reactions like oxygen reduction. The smaller size of N-GQDs has shown better performance as compared to the large N-GQDs. Interestingly, N-GQDs-3 (size = 2.5 +/- 0.3 nm, onset potential = 0.75 V) show a 30-mV higher positive onset potential shift compared to that of N-GQDs-2 (size = 4.7 +/- 0.3 nm, onset potential = 0.72 V) and 70 mV than that of N-GQDs-1 (size = 7.2 +/- 0.3, onset potential = 0.68 V) for oxygen reduction reaction (ORR) in a liquid phase. These result in the size-dependent electrocatalytic activity of N-GQDs for ORR as illustrated by the smaller sized N-GQDs (2.5 +/- 0.3 nm) undoubtedly promising metal-free electrocatalysts for fuel cell applications.

}, keywords = {fuel cells, MWCNTs, N-GQDs, oxygen reduction reaction, unzipping}, issn = {0250-4707}, doi = {10.1007/s12034-014-0834-3}, author = {Shinde, Dhanraj B. and Dhavale, Vishal M. and Kurungot, Sreekumar and Pillai, Vijayamohanan K.} } @article {46038, title = {MWCNTs-ZnO-SiO2 mesoporous nano-hybrid materials for CO2 capture}, journal = {Journal of Alloys and Compounds}, volume = {800}, year = {2019}, month = {SEP}, pages = {279-285}, type = {Article}, abstract = {

Carbon nanostructures and metal nanoparticles based nanohybrid materials have been established as one of advantageous materials for various applications. Here, we present hydrothermal and sol-gel process at low temperature for the synthesis of (3-Aminopropyl) triethoxysilane (APTES)-ZnO-multi-walled carbon nanotubes (MWCNTs) mesoporous nanohybrid materials. TEM and XPS measurements show that uniform size and quasi-spherical ZnO nanoparticles were anchored to the surface of the MWCNTs. SEM observation exhibits that the aggregation of ZnO nanoparticles is greatly reduced due to the steric repulsion of grafted organic groups. The maximum CO2 adsorption capacity at 273 K was 1.32 mmol/g for MWCNTs-APTES-ZnO-B nanohybrid. An increase in the density of ZnO nanoparticles on the surface of MWCNTs resulted in a higher affinity towards CO2 at low pressure. This work provides new research directions for making further advances toward practical utilization of MWCNTs-based CO2 adsorbents. (C) 2019 Published by Elsevier B.V.

}, keywords = {CO2 capture, Mesoporous, MWCNTs, Nanohybrid, TEM, XPS}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2019.06.011}, author = {Jena, Kishore K. and Panda, Amulya Prasad and Verma, Savita and Mani, Ganesh Kumar and Swain, S. K. and Alhassan, Saeed M.} }