@article {43796, title = {Partially bio-based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin-derived phenolic acids and aromatic dianhydrides: synthesis, characterization, and computational studies}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {55}, year = {2017}, month = {NOV}, pages = {3636-3645}, type = {Article}, abstract = {

Two new bio-based diacylhydrazide monomers, namely, 4,4-(propane-1,3-diylbis(oxy))bis(3-methoxybenzohydrazide) and 4,4-(propane-1,3-diylbis(oxy))bis(3,5-dimethoxybenzohydrazide) were synthesized starting from lignin-derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44-0.56 dLg(-1) and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N,N-dimethylacetamide solutions. Poly(amide imide)s showed 10\% weight loss in the temperature range 340-364 degrees C indicating their good thermal stability. Glass transition temperature (T-g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201-223 degrees C and 214-248 degrees C, respectively. The T-g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T-g. (c) 2017 Wiley Periodicals, Inc.

}, keywords = {Biobased Polymers, Computational studies, Glass-transaction temperature, lignin, Monomers, Plant oils, Polyimide, Reneable resources, Renewable resources, Step-growth polymers, structure-property relations, Sustanaible Polymers, Thermal night, Thermosetting resins, Vanillin}, issn = {0887-624X}, doi = {10.1002/pola.28748}, author = {Kuhire, Sachin S. and Sharma, Pragati and Chakrabarty, Suman and Wadgaonkar, Prakash P.} } @article {46171, title = {Partially bio-based aromatic poly(ether sulfone)s bearing pendant furyl groups: synthesis, characterization and thermo-reversible cross-linking with a bismaleimide}, journal = {Polymer Chemistry}, volume = {10}, year = {2019}, month = {MAR }, pages = {1089-1098}, type = {Article}, abstract = {

A fully bio-based bisphenol bearing pendant furyl group, viz., 4,4{\textquoteright}-(furan-2-ylmethylene) bis(2-methoxyphenol) (BPF) was synthesized by base-catalyzed condensation of furfural with guaiacol. New partially bio-based (co) poly(ether sulfone) s bearing pendant furyl groups were synthesized via aromatic nucleophilic substitution polycondensation of BPF and various mixtures of BPF and bisphenol-A with bis(4-fluorophenyl) sulfone in N, N-dimethylacetamide as a solvent. (Co) poly(ether sulfone) s showed inherent viscosities in the range 0.92-1.47 dL g(-1) and number average molecular weights ((M-n) over bar), obtained from GPC, were in the range 91 300-131 000 g mol(-1). (Co) poly(ether sulfone) s could be cast into tough, transparent and flexible films from chloroform solutions. (Co)poly(ether sulfone)s showed 10\% weight loss in the temperature range 431-481 degrees C and DSC showed T-g in the range 179-190 degrees C. Tensile strength, Young{\textquoteright}s modulus and elongation at break, obtained from tensile testing of (co) poly(ether sulfone) s containing pendant furyl groups, were in the range 76.7-83.8 MPa, 1.02-1.18 GPa and 21.4-89.7\%, respectively. Most interestingly, pendant furyl groups in (co) poly(ether sulfone) s provide reactive sites for click modification and cross-linking via Diels-Alder reaction with maleimides and bismaleimides, respectively. Crosslinked (co) poly(ether sulfone) was prepared via Diels-Alder reaction of a representative (co) poly(ether sulfone) containing pendant furyl groups with 1,1{\textquoteright}-(methylenedi-1,4-phenylene) bismaleimide (BMI) at 60 degrees C. The formation of cross-linked poly(ether sulfone) was demonstrated by gelation tests, solubility tests and DSC. The cross-linked copoly(ether sulfone) prepared using BMI showed enhanced tensile strength and Young{\textquoteright}s modulus compared to parent copoly(ether sulfone) and was recycled two times with retention of mechanical properties.

}, issn = {1759-9954}, doi = {10.1039/c8py01477a}, author = {Nagane, Samadhan S. and Kuhire, Sachin S. and Mane, Shivshankar R. and Wadgaonkar, Prakash P.} } @article {46596, title = {Partially bio-based furyl-functionalized organosoluble poly(ether ether ketone)s}, journal = {Polymer International}, volume = {70}, year = {2021}, month = {AUG}, type = {Article}, abstract = {

A new series of partially bio-based (co)poly(ether ether ketone)s bearing pendent furyl groups was synthesized by nucleophilic aromatic substitution polycondensation of varying molar proportions of 4,4 {\textquoteleft}-(furan-2-ylmethylene)bis(2-methoxyphenol) and bisphenol-A with 4,4 {\textquoteleft}-difluorobenzophenone. The chemical structures, compositions and random nature of (co)poly(ether ether ketone)s were confirmed by NMR spectroscopy. Inherent viscosities and number-average molecular weights of the (co)poly(ether ether ketone)s were in the range 0.74-2.90 dL g(-1) and 33 500-46 300 g mol(-1), respectively, indicating the formation of reasonably high molecular weight polymers. (Co)poly(ether ether ketone)s were readily soluble in common organic solvents and could be cast into tough, transparent and flexible films from chloroform solutions. (Co)poly(ether ether ketone)s exhibited 10\% weight loss and glass transition temperatures in the range 429-464 and 152-156 degrees C, respectively. A representative copoly(ether ether ketone) was crosslinked with 1,1 {\textquoteleft}-(methylenedi-1,4-phenylene)bismaleimide via Diels-Alder reaction to form a crosslinked polymer which showed improved mechanical properties and was recycled twice without significant loss of mechanical properties. Diels-Alder/retro Diels-Alder reaction was demonstrated by studies of sol-gel transformation, solubility tests, DSC and stress-strain measurements. (c) 2020 Society of Chemical Industry

}, keywords = {aromatic poly(ether ether ketone)s, bio-based, crosslinking, Diels-Alder reaction, pendent furyl groups}, issn = {0959-8103}, doi = {10.1002/pi.6160}, author = {Kuhire, Sachin S. and Talanikar, Aniket A. and Tawade, V, Bhausaheb and Nagane, Samadhan S. and Wadgaonkar, Prakash P.} }