@article { ISI:000313263300022, title = {Porous-organic-framework-templated nitrogen-rich porous carbon as a more proficient electrocatalyst than Pt/C for the electrochemical reduction of oxygen}, journal = {Chemistry-A European Journal}, volume = {19}, number = {3}, year = {2013}, month = {JAN}, pages = {974-980}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Porous nitrogen-rich carbon (POF-C-1000) that was synthesized by using a porous organic framework (POF) as a self-sacrificing host template in a nanocasting process possessed a high degree of graphitization in an ordered structural arrangement with large domains and well-ordered arrays of carbon sheets. POF-C-1000 exhibits favorable electrocatalytic activity for the oxygen-reduction reaction (ORR) with a clear positive shift of about 40 mV in the onset potential compared to that of a traditional, commercially available Pt/C catalyst. In addition, irrespective of its moderate surface area (785 m2?g-1), POF-C-1000 showed a reasonable H2 adsorption of 1.6 wt?\% (77 K) and a CO2 uptake of 3.5 mmol?g-1 (273 K).

}, keywords = {Adsorption, Electrochemistry, fuel cells, oxygen-reduction reaction, porous organic frameworks}, issn = {0947-6539}, doi = {10.1002/chem.201202940}, author = {Pachfule, Pradip and Dhavale, Vishal M. and Kandambeth, Sharath and Kurungot, Sreekumar and Banerjee, Rahul} } @article { ISI:000335720200011, title = {Phosphoric acid loaded azo (-N=N-) based covalent organic framework for proton conduction}, journal = {Journal of the American Chemical Society}, volume = {136}, number = {18}, year = {2014}, month = {MAY}, pages = {6570-6573}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Two new chemically stable functional crystalline covalent organic frameworkds (COFs) (Tp-Azo and Tp-Stb) were synthesized using the Schiff base reaction between triformylphloroglucinol (Tp) and 4,4{\textquoteright}-azodianiline (Azo) or 4,4{\textquoteright}-diaminostilbene (Stb), respectively. Both COFs show the expected keto-enamine form, and high stability toward boiling water, strong acidic, and basic media. H3PO4 doping in Tp-Azo leads to immobilization of the acid within the porous framework, which facilitates proton conduction in both the hydrous (sigma = 9.9 X 10(-4) S cm(-1)) and anhydrous state (sigma = 6.7 X 10(-5) S cm-1). This report constitutes the first emergence of COFs as proton conducting materials.

}, issn = {0002-7863}, doi = {10.1021/ja502212v}, author = {Chandra, Suman and Kundu, Tanay and Kandambeth, Sharath and BabaRao, Ravichandar and Marathe, Yogesh N. and Kunjir, Shrikant M. and Banerjee, Rahul} } @article { ISI:000365205000004, title = {Pore surface engineering in porous, chemically stable covalent organic frameworks for water adsorption}, journal = {Journal of Materials Chemistry A}, volume = {3}, number = {47}, year = {2015}, month = {NOV}, pages = {23664-23669}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein, we have explored the possibility of a class of covalent organic frameworks (COFs) as water adsorbing materials. We have selected, synthesized 12 chemically stable functionalized Schiff base COFs and thoroughly studied their water uptake behaviour. Further, a deep understanding was developed with these COFs towards the effects of condensation pressure of water and hydrophilic/hydrophobic groups present in the COF pores on water absorption capacity and ultimately, their recyclability. Among all reported COFs, TpPa-1 shows the highest water uptake of 30 wt\% (368 cm(3) g(-1); 17 mmol g(-1)) at P/P-0 = 0.3, which is also comparable with the recently reported carbon materials and few well known MOFs. This study also reveals that the overall water uptake of COFs can be tuned systematically based on chemical functionality and pore size in a wider window of relative pressures.

}, issn = {2050-7488}, doi = {10.1039/c5ta07998e}, author = {Biswal, Bishnu P. and Kandambeth, Sharath and Chandra, Suman and Shinde, Digambar Balaji and Bera, Saibal and Karak, Suvendu and Garai, Bikash and Kharul, Ulhas K. and Banerjee, Rahul} } @article {43721, title = {Porous porphyrin organic polymer (PPOP) for visible light triggered hydrogen production}, journal = {Chemical Communications}, volume = {53}, year = {2017}, month = {APR}, pages = {4461-4464}, type = {Article}, chapter = {4461-4464}, abstract = {A visible light active porphyrin-based porous organic polymer having high chemical stability and surface area has been synthesized and its ability to influence the photocatalytic activity of large band gap-TiO2 nanoparticles has been tested. The resultant composite shows improved photocatalytic activity as compared to the parent precursors. This study provides insights into the photosensitizing ability of the polymer in addition to its ability to firmly harbor nanoparticles onto its surface.}, doi = {10.1039/c7cc00879a}, author = {Mukherjee, Gargi and Thote, Jayshri and Aiyappa, Harshitha Barike and Kandambeth, Sharath and Banerjee, Subhrashis and Vanka, Kumar and Banerjee, Rahul} } @article {43732, title = {Predesigned metal-anchored building block for in situ generation of Pd nanoparticles in porous covalent organic framework: application in heterogeneous tandem catalysis}, journal = {ACS Applied Materials \& Interfaces}, volume = {9}, year = {2017}, month = {APR}, pages = {13785-13792}, type = {Article}, abstract = {The development of nanoparticle-polymer-hybrid-based heterogeneous catalysts with high reactivity and good recyclability is highly desired for their applications in the chemical and pharmaceutical industries: Herein, we have developed a novel synthetic strategy by choosing a predesigned metal-anchored building block for in situ generation of metal (Pd) nanoparticles in the stable, porous, and crystalline covalent organic framework (COF), without using conventional reducing agents. In situ generation of Pd nanoparticles in the COF Skeleton is explicitly confirmed{\textquoteright} from PXRD, XPS, TEM images, and N-15 NMR spectral analysis. This hybrid material is found to be an excellent reusable heterogeneous catalyst for the synthesis of biologically and pharmaceutically important 2-substituted benzofurans from 2-bromophencils and terminal alkynes via a tandem process with the turnover number up to 1101. The heterogeneity of the catalytic process is unambiguously verified by a mercury poisoning experiment and leaching test. This hybrid material shows superior catalytic performance compared to commercially available homogeneous as well as heterogeneous Pd catalysts.}, doi = {10.1021/acsami.7b02355}, author = {Bhadra, Mohitosh and Sasmal, Himadri Sekhar and Basu, Arghya and Midya, Siba P. and Kandambeth, Sharath and Pachfule, Pradip and Balaraman, Ekambaram and Banerjee, Rahul} } @article {48209, title = {Porous covalent organic nanotubes and their assembly in loops and toroids}, journal = {Nature Chemistry}, volume = {14}, year = {2022}, month = {MAY}, pages = {507+}, type = {Article}, abstract = {

Carbon nanotubes, and synthetic organic nanotubes more generally, have in recent decades been widely explored for application in electronic devices, energy storage, catalysis and biosensors. Despite noteworthy progress made in the synthesis of nanotubular architectures with well-defined lengths and diameters, purely covalently bonded organic nanotubes have remained somewhat challenging to prepare. Here we report the synthesis of covalently bonded porous organic nanotubes (CONTs) by Schiff base reaction between a tetratopic amine-functionalized triptycene and a linear dialdehyde. The spatial orientation of the functional groups promotes the growth of the framework in one dimension, and the strong covalent bonds between carbon, nitrogen and oxygen impart the resulting CONTs with high thermal and chemical stability. Upon ultrasonication, the CONTs form intertwined structures that go on to coil and form toroidal superstructures. Computational studies give some insight into the effect of the solvent in this assembly process.

}, issn = {1755-4330}, doi = {10.1038/s41557-022-00908-1}, author = {Koner, Kalipada and Karak, Shayan and Kandambeth, Sharath and Karak, Suvendu and Thomas, Neethu and Leanza, Luigi and Perego, Claudio and Pesce, Luca and Capelli, Riccardo and Moun, Monika and Bhakar, Monika and Ajithkumar, Thalasseril G. and Pavan, Giovanni M. and Banerjee, Rahul} }