@article { ISI:000380052000012, title = {Highly stable laser-scribed flexible planar microsupercapacitor using mushroom derived carbon electrodes}, journal = {Advanced Materials Interfaces}, volume = {3}, number = {11}, year = {2016}, month = {JUN}, pages = {1600057}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A report is presented on the fabrication of all solid-state interdigitated flexible microsupercapacitor using ultrafast and highly scalable laser scribing technique, using highly mesoporous carbon synthesized from biomass (mushroom) with hydrothermal preprocessing. The specific protocol used for carbon synthesis renders some unique property features to the material (surface area of 2604 m(2) g(-1) with hierarchical pore size distribution) in the context of supercapacitor electrode application. A polyvinyl alcohol (PVA)-H2SO4 gel electrolyte is used for electrochemical measurements. The microsupercapacitor shows high cyclic stability up to 15000 cycles. Moreover it shows nearly 90\% stability after 1000 bending cycles at 60 degrees angle. It also retains its performance even under 120 degrees bending condition. This work represents a facile and fast technique for microscaled device fabrication that can be easily commercialized. Moreover, the mushroom-derived carbon used to make the electrodes holds great promise in context of the stability and flexibility of flexible supercapacitors.

}, issn = {2196-7350}, doi = {10.1002/admi.201600057}, author = {Yadav, Poonam and Basu, Aniruddha and Suryawanshi, Anil and Game, Onkar S. and Ogale, Satishchandra} } @article {43595, title = {Minute-made activated porous carbon from agro-waste for Li-ion battery anode using a low power microwave oven}, journal = {Electrochimica ACTA}, volume = {212}, year = {2016}, month = {SEP}, pages = {535-544}, abstract = {We demonstrate a very simple, cost-effective and superfast process for making Li-ion battery (LIB) anode grade carbon from agro-waste in the form of sugarcane bagasse using a low power microwave system. Activation of this bagasse derived carbon is carefully optimized by using various weight ratios of KOH to obtain the desired properties of functional carbon in terms of porosity and electrical conductivity. Low equivalent series resistance (ESR), low charge transfer resistance with good electrical conductivity, and optimum porosity for efficient ion diffusion make this carbon a good candidate for Li-ion battery anode material rendering a reversible capacity of 757 mAhg (1) at a current density of 100 mAg (1) and a good cycling performance at high current rates. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.electacta.2016.07.011}, author = {Agarkar, Shruti and Yadav, Poonam and Fernandes, Rohan and Kothari, Dushyant and Suryawanshi, Anil and Ogale, Satishchandra} } @article {44481, title = {G-C3N4/NiAl-LDH 2D/2D hybrid heterojunction for high-performance photocatalytic reduction ofco2 into renewable fuels}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {JAN}, pages = {2667-2678}, type = {Article }, abstract = {2D/2D interface heterostructures of g-C3N4 and NiAl-LDH are synthesized utilizing strong electrostatic interactions between positively charged 2D NiAl-LDH sheets and negatively charged 2D g-C3N4 nanosheets. This new 2D/2D interface heterojunction showed remarkable performance for photocatalytic CO, reduction to produce renewable fuels such as CO and H-2 under visible-light irradiation, far superior to that of either single phase g-C3N4 or NiAl-LDH nanosheets. The enhancement of photocatalytic activity could be attributed mainly to the excellent interfacial contact at the heterojunction of gC(3)N(4)/NiAl-LDH, which subsequently results in suppressed recombination, and improved transfer and separation of photogenerated charge carriers. In addition, the optimal g-C3N4/NiAl-LDH nanocomposite possessed high photostability after successive experimental runs with no obvious change in the production of CO from CO, reduction. Our findings regarding the design, fabrication and photophysical properties of 2D/2D heterostructure systems may find use in other photocatalytic applications including H-2 production and water purification.}, doi = {10.1021/acsami.7b18835}, author = {Tonda, Surendar and Kumar, Santosh and Bhardwaj, Monika and Yadav, Poonam and Ogale, Satishchandra} } @article {44351, title = {In situ phase transformation synthesis of unique Janus Ag2O/Ag2CO3 heterojunction photocatalyst with improved photocatalytic properties}, journal = {Applied Surface Science}, volume = {445}, year = {2018}, month = {JUL}, pages = {555-562}, type = {Article}, abstract = {Herein, Ag2O/Ag2CO3 nanocomposite with unique Janus morphology was synthesized by a facile ion-exchange followed by an in situ phase transformation method with precise control of its nucleation and growth processes. Contrary to conventional synthetic procedures of Janus architectures, the present Janus system was constructed without the need for surfactants or toxic chemicals. Most importantly, the visible-light-absorbing Janus Ag2O/Ag2CO3 nanocomposite exhibits a remarkable performance toward the degradation of Rhodamine B and 4-chlorophenol, far superior to that observed for bare Ag2CO3. The obvious enhancement of the photocatalytic performance of this nanocomposite is mainly attributed to the intimate Ag2O/Ag2CO3 interface created by its exceptional Janus architecture, which in turn allows for rapid charge transfer processes. Additionally, the Janus system exhibited a high photostability during recycling experiments with no significant change in the degradation activity. (C) 2018 Published by Elsevier B.V.}, doi = {10.1016/j.apsusc.2018.03.194}, author = {Jo, Wan-Kuen and Kumar, Santosh and Yadav, Poonam and Tonda, Surendar} } @article {46748, title = {Electrochemical evaluation of the stability and capacity of r-GO-wrapped copper antimony chalcogenide anode for Li-ion battery}, journal = {ChemElectroChem}, volume = {7}, year = {2020}, month = {AUG }, pages = {3291-3300}, type = {Article}, abstract = {

Poor cycling stability and capacity fade are primary concerns for next-generation anode materials for Li-ion batteries. In non-carbonaceous anode materials, alloying with Li leads to volume increase that affects practical applications, and increase in particle size, amorphization and reduced conductivity can all lead to a loss of performance. In this work, binary antimony sulfide (Sb2S3) and ternary copper antimony sulfide (CuSbS2) are synthesized by a convenient solvothermal process. These materials are used to study the Li-active/inactive concept, by incorporating Cu into Sb(2)S(3)forming CuSbS(2)wherein Cu is Li inactive whereas Sb is Li active. By direct comparison, we have shown that incorporating Cu into binary antimony sulfide (Sb2S3) resulting into ternary copper antimony sulfide (CuSbS2) addresses the problem of poor conductivity and capacity loss, as Cu provides conductivity leading to enhanced charge transfer and prevents Sb particle aggregation while charge-discharge by exhibiting spectator or diluent ion effect. The better performance of CuSbS(2)is associated with the better Li(+)ion diffusion in the CuSbS2(D=8.97x10(-15) cm(2) s(-1)) compared to Sb2S3(D=2.76x10(-15) cm(2) s(-1)) and lower series resistance of CuSbS2(R=4.70x10(5) omega) compared to Sb2S3(R=5.81x10(8) omega). We have also investigated the composite with the addition of rGO. The CuSbS2-rGO delivered a reversible capacity of 672 mAh g(-1)after 1000 cycles at 200 mA g(-1)which has shown best performance.

}, keywords = {Batteries, chalcogenides, Diffusion coefficient, lithium, Ternary sulfides}, issn = {2196-0216}, doi = {10.1002/celc.202000625}, author = {Yadav, Poonam and Sharma, Neha and Patrike, Apurva and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha} } @article {46821, title = {Electrospun nanofibers of Tin phosphide (SnP0.94) nanoparticles encapsulated in a carbon matrix: a tunable conversion-cum-alloying lithium storage anode}, journal = {Energy \& Fuels}, volume = {34}, year = {2020}, month = {JUN}, pages = {7648-7657}, type = {Article; Proceedings Paper}, abstract = {

Anodes with improved Li storage capability are required for next-generation lithium batteries. In this work we report a convenient synthesis strategy, based on electrospinning followed by reduction and phosphorization, to prepare a tin phosphide (SnP0.94) phase in a carbon nanofiber matrix. The layered structure offered by the SnP0.94 phase, along with its small size (5-20 nm) encapsulated in the conducting carbon matrix, leads to promising electrochemical Li storage characteristics. This composite has a capacity of 750 mAh g(-1) at 100 mA g(-1) with good cycling and rate stability. Electrochemical studies revealed a faster diffusion coefficient (1.86 x 10(-11) cm(2) s(-1)) for Li in the composite compared to the bare SnP0.94 (8.57 x 10(-14) cm(2) s(-1)), confirming the promise of this class of materials for cation storage in battery anodes.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.0c01046}, author = {Yadav, Poonam and Malik, Wahid and Dwivedi, Pravin Kumari and Jones, Lathe A. and Shelke, Manjusha V.} } @article {48147, title = {Facile synthesis of nanocomposites of CNF-Sn and C-Sn microspheres: Prospective field emitter}, journal = {Journal of Alloys and Compounds}, volume = {907}, year = {2022}, month = {JUN }, pages = {164318}, type = {Article}, abstract = {

We report synthesis of Carbon nanofibers (CNFs) and hybrid nanocomposites namely, CNF-Sn and C-Sn microspheres using simple electrospinning technique, followed by annealing in controlled atmosphere. The as-prepared materials were characterized using X-raydiffraction (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Ultra-violet photoelectron spectroscopy (UPS), and Raman spectroscopy to reveal their physico-chemical properties. As carbon family members are potential materials for field emission (FE) based applications, owing to their high aspect ratio FE characteristics of the synthesized materials were explored at base pressure of 1 x 10(-8) mbar. Interestingly, the hybrid nanocomposite CNF-Sn and C-Sn emitters showed improved FE behavior (with the turn-on field of 3.4 and 1.36 V/mu m, respectively) in contrast to the pristine CNFs emitter (turn-on field of 5.4 V/mu m). Furthermore, the maximum emission current density is substantially enhanced, 7.75 and 4.6 mA/cm(2) for CNF-Sn and C-Sn emitters, respectively. The improvement in the FE behavior of nanocomposite emitters is attributed to the combined effect of morphology and modulation of electronic properties at the interface of nanocomposites. The results confirm that FE characteristics of pristine nanostructures can be greatly improved upon formation of their nanocomposites and this approach can be extended to other nanostructures for improving their multi-functionalities. (c) 2022 Elsevier B.V. All rights reserved.

}, keywords = {carbon nanofiber, electrospinning, field emission, Nanocomposite, Tin}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2022.164318}, author = {Badadhe, Satish S. and Yadav, Poonam and Suryawanshi, Sachin and More, Mahendra A.} } @article {48010, title = {Honeycomb boron carbon nitride as high-performance anode material for li-ion batteries}, journal = {ChemNanoMat}, volume = {8}, year = {2022}, month = {JUL}, pages = {e202200056}, type = {Article}, abstract = {

3D Porous carbon-based materials are well known for their excellent mechanical and electrochemical properties for various energy storage applications including Li-ion Battery (LIB) anodes. However, their commercial application is limited due to their low theoretical specific capacity. Heteroatom doping in carbonaceous networks proved an efficient way to modify the surface properties, which considerably improves the Li intake capacity and Li diffusion in porous carbon materials. In this work, we have synthesized 3D honeycomb boron carbon nitride (HBCN) from boric acid, glucose, and cyanamide. Silica nanoparticles (SiO2 NPs) are used as structure-directing agents to replicate well-organized honeycomb structures. HBCN possesses a high specific surface area (SSA) of similar to 597 m(2) g(-1), with a uniform porosity distribution, low charge transfer resistance, and steady Li flux. When analyzed as an anode material for LIB, HBCN demonstrated an excellent specific capacity of similar to 652 mAhg(-1) and 408 mAhg(-1) at an input current density of 100 mAg(-1) and 1 Ag-1 respectively and an energy density of 227 Wh kg(-1) at 1 C rate in a full cell LIB. These results indicate that the doping of B and N hetero atoms is significantly advantageous for LIBs application.

}, keywords = {3D-Architecture, Heteroatom Doping, High-Performance Anode, Honeycomb boron carbon nitride (HBCN), Li-ion battery}, issn = {2199-692X}, doi = {10.1002/cnma.202200056}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Patrike, Apurva and Yadav, Poonam and Shelke, V, Manjusha} } @article {48100, title = {Research progress and perspective on lithium/sodium metal anodes for next-generation rechargeable batteries}, journal = {ChemSusChem}, volume = {15}, year = {2022}, month = {JUL}, pages = {e202200504}, type = {Review}, abstract = {

With the development of consumer electronic devices and electric vehicles, lithium-ion batteries (LIBs) are vital components for high energy storage with great impact on our modern life. However, LIBs still cannot meet all the essential demands of rapidly growing new industries. In pursuance of higher energy requirement, metal batteries (MBs) are the next-generation high-energy-density devices. Li/Na metals are considered as an ideal anode for high-energy batteries due to extremely high theoretical specific capacity (3860 and 1165 mAh g(-1) for Li and Na, respectively) and low electrochemical potential (-3.04 V for Li and -2.71 V for Na vs. standard hydrogen electrode). Unfortunately, uncontrolled dendrite growth, high reactivity, and infinite volume change induce severe safety concerns and poor cycle efficiency during their application. Consequently, MBs are far from commercialization stage. This Review represents a comprehensive overview of failure mechanism of lithium/sodium metal anode and its progress for rechargeable batteries through (i) electrolyte optimization, (ii) artificial solid-electrolyte interphase (SEI) layer formation, and (iii) nanoengineering at materials level in current collector, anode, and host. The challenges in current MBs research and potential applications of lithium/sodium metal anodes are also outlined and summarized.

}, keywords = {anode, Batteries, dendrite growth, Electrolytes, Energy storage}, issn = {1864-5631}, doi = {10.1002/cssc.202200504}, author = {Patrike, Apurva and Yadav, Poonam and Shelke, Vilas and Shelke, Manjusha} } @article {48208, title = {Sustainable composite of SnFe2O4 conversion alloying anode for lithium-ion storage}, journal = {Sustainable Energy \& Fuels}, volume = {6}, year = {2022}, month = {AUG }, pages = {3806-3817}, type = {Article}, abstract = {

The development of high-performance, low-cost electrodes using sustainable materials for Li-ion batteries is of vital importance in view of their increasing demand for use in electronics and electric vehicles, as we transition from non-renewable energy resources. Challenges associated with commercial graphite anode materials include relatively low capacity, the use of high-temperature synthesis, Li dendrite formation, and limited rate capability. In this study, we present a tin ferrite SnFe2O4 (SFO) conversion alloying material (CAM), and its synergistic composite with a scalable and low-cost waste-derived carbon (WDC), which was prepared by low-temperature pyrolysis of a waste material sustainably. The combination of SFO with the WDC in the composite boosts the conductivity, diffusion kinetics, stability, and reversibility, and accommodates volume expansion upon cycling. The first charge capacity obtained for WDC, SFO, and SFO-WDC is 595, 1269, and 1331 mA h g(-1), respectively at 100 mA g(-1) in a Li-ion half-cell. In a full cell fabricated with LFP, a stable capacity of 80 mA h g(-1) at 100 mA g(-1) could be obtained, and the corresponding energy density for the SFO-WDCIILFP full cell is 300 W h kg(-1). Kinetic studies revealed that capacitance-controlled charge storage is dominant so the capacity was higher in the composite. This composite system addresses both the low capacity issue of the carbon anode and stability issues of CAMs while being compatible for use with current Li-ion battery technology.

}, issn = {2398-4902}, doi = {10.1039/d2se00919f}, author = {Yadav, Poonam and Parte, Golu and Malik, Wahid and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha} } @article {48454, title = {Template directed synthesis of boron carbon nitride nanotubes (BCN-NTs) and their evaluation for energy storage properties}, journal = {Advanced Materials Interfaces}, volume = {10}, year = {2023}, month = {JAN}, type = {Article}, abstract = {

A unique approach has been applied for the synthesis of 1D boron carbon nitride nanotubes (BCN-NTs) using MnO2 nanowires as templates. BCN-NTs have been evaluated in Na-ion batteries, Li-ion batteries, and supercapacitors as electrode material and exhibited excellent and stable electrochemical performance. BCN-NTs as an anode for Na-ion battery has been shown to be highly stable up to 3000 cycles with capacity retention of 95 mAh g(-1), at a high current density of 1 A g(-1). In the case of the Li-ion battery, these BCN-NTs show a specific capacity of 563 mAh g(-1) at a current density of 50 mA g(-1). Finally, when used as an electrode for a supercapacitor, BCN-NTs display a specific capacity of 221 F g(-1) at a current density of 3 A g(-1) and 168 F g(-1) even at a very high current density of 30 A g(-1) exemplifying the excellent rate performance. The multifunctionality and stable performance of BCN-NTs among various electrochemical energy storage systems highlight the robustness of the material and make it an excellent candidate for scalable production and commercialization.

}, keywords = {1D-nanostructure, boron carbon nitride nanotubes (BCN-NTs), Co-doping, Li-ion battery, Na-ion battery, Supercapacitors}, issn = {2196-7350}, doi = {10.1002/admi.202201560}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Yadav, Poonam and Patrike, Apurva and Shelke, Manjusha V.} } @article {49066, title = {Photocatalytic CO2 reduction to syngas using nickel phosphide-loaded CdS under visible light irradiation}, journal = {Journal of Physics-Energy}, volume = {6}, year = {2024}, month = {APR }, pages = {025019}, type = {Article}, abstract = {

Photocatalytic CO2 reduction is a sustainable pathway to produce syngas (H-2 + CO), which is a key feedstock for the production of several important liquid fuels on the industrial scale. However, achieving an appropriate tunable ratio of H-2:CO in syngas for commercial purposes is a challenging task. In this work, we present a low-cost and non-noble metal, phosphide-based co-catalyst-Ni2P-loaded cadmium sulfide (CdS) photocatalyst system, for photocatalytic CO2 reduction. As a co-catalyst, Ni2P fosters an efficient charge separation of photoexcited charges generated in the CdS production of syngas. In total, 3 wt.\% Ni2P/CdS exhibited exceptional performance of 50.6 mu mol g(-1) h(-1) in the CO evolution rate and 115 mu mol g(-1) h(-1) in the H-2 evolution rate, with a syngas composition varying from 2 to 4 in the H-2:CO ratio. Furthermore, first-principles density functional theory calculations were performed to study the surface energetics of the catalyst system and the results are found to be consistent with our experimental findings. Indeed, they establish that the composite favors CO2 photoreduction into syngas more efficiently than pure surfaces.

}, keywords = {CdS, CO2 reduction, Photocatalysis, Syngas, transition metal phosphides}, issn = {2515-7655}, doi = {10.1088/2515-7655/ad3676}, author = {Yadav, Poonam and Kumar, Santosh and Velankanni, Nandhakumar and Kuehne, Thomas D. and Gosavi, Suresh and Raghupathy, Ramya Kormath Madam and Bhosale, Reshma and Held, Georg and Shelke, Manjusha and Ogale, Satishchandra} } @article {49112, title = {Wide temperature enhanced sodium storage in tailored, sustainable sodiophilic biphasic N-doped carbon}, journal = {Materials Today Chemistry }, volume = {37}, year = {2024}, month = {APR}, type = {Article}, abstract = {

Alternative to Li-ion batteries(LIB), Na-ion batteries (NIB) and Na metal batteries (NMB) are gaining significant attention due to their low cost, abundance, and safety. By modulating microstructural properties such as graphitization, heteroatom doping, surface-rich functional groups, and interlayer d-spacing, Na-ion storage in NIB and Na plating/striping in NMB can be ameliorated. This study reports sodiophilic N-doped polymer-derived carbon (PDC) as an anode for NIB and host for Na metal in NMB. As NIB anode, PDC provides a storage capacity of 173 mAh g- 1 at 1 A g- 1 in half-cell and 84 mAh g- 1 at 1C (1C = 128 mAhg- 1) in full-cell with Na3V2(PO4)2F3 (NVPF) cathode. As Na metal anode (NMA) host, a high columbic efficiency (C.E.) of 99.45\% for over 1000 cycles at 6 mA cm- 2_4 mAh cm-2 is obtained. Furthermore, fascinating wide temperature (50 degrees C and -20 degrees C) sodiumion storage is successfully demonstrated by PDC. Advanced X-ray photoelectron spectroscopy (XPS) confirmed the formation of stable and uniform solid electrolyte interphase (SEI) composed of inorganic and organic components, X-ray microtomography confirmed uniform Na plating throughout the volume of the electrode analogous to Brunauer-Emmett-Teller (BET) surface area, Raman spectroscopy, X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) results. A sustainable and scalable promising biphasic NIB anode and sodiophilic host for Na metal was possible due to larger d-spacing, partial graphitization, high mesoporosity, N-doping, presence of surface functional groups, better charge transfer, and diffusion properties.

}, keywords = {Full-cell, Low and elevated temperatures, Na metal host, Polymer-derived carbon, Sodium-ion battery, X-ray tomography}, issn = {2468-5194}, doi = {10.1016/j.mtchem.2024.101978}, author = {Yadav, Poonam and Das, Anoushka K. and Torris, Arun and Wasnik, Kundan and Koppisetti, Heramba Venkata Sai Rama Murthy and Pol, Vilas G. and Shelke, Vilas and Shelke, Manjusha} }