@article { ISI:000227321500008, title = {Simple oxalate precursor route for the preparation of barium-strontium titanate: Ba1-xSrxTiO3 powders}, journal = {Materials Characterization}, volume = {54}, number = {1}, year = {2005}, month = {JAN}, pages = {63-74}, publisher = {ELSEVIER SCIENCE INC}, type = {Article}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

A simple one-step cation-exchange reaction between the stoichiometric solutions of ammonium titanyl oxalate (ATO) and barium hydroxide+strontium nitrate at room temperature (RT) is investigated successfully for the quantitative precipitation of barium-strontium titanyl oxalate (BSTO): Ba1-xSrxTiO(C2O4)(2).4H(2)O (x=0.25) precursor powders with nearly theoretical yield (greater than or equal to99\%). The pyrolysis of BSTO at 730degreesC/4 h in air produced barium-strontium titanate (Ba1-xSrxTiO3; BST) powders. The characterization studies on BSTO and BST powders by using various physico-chemical techniques: micro- and chemical analysis, differential thermal analysis (DTA)/thermo-gavimetric analysis (TGA), XRD, FTIR, X-ray fluorescence (XRF) and scanning electron microscopy (SEM) revealed that the powders formed are cubic, highly pure, stoichiometric and sub-micron-sized with nearly uniform size and shape distribution. The ceramic compacts obtained by sintering the BST pellets at 1300degreesC/4 It showed density similar to95\%, dielectric constant epsilon(Tc)similar to9500, tan delta-0.15\% and T(C)similar to32 degreesC. (C) 2004 Elsevier Inc. All rights reserved.

}, keywords = {barium-strontium titanate, barium-strontium titanyl oxalate, permittivity, XRF}, issn = {1044-5803}, doi = {10.1016/j.matchar.2004.11.002}, author = {Khollam, Y. B. and Deshpande, S. B. and Potdar, H. S. and Bhoraskar, S. V. and Sainkar, S. R. and Date, Sadgopal K.} } @article { ISI:000260230400034, title = {Scanning tunneling microscopic and field emission microscopic studies of nanostructured molybdenum film synthesized by electron cyclotron resonance plasma}, journal = {Vacuum}, volume = {83}, number = {2}, year = {2008}, month = {SEP}, pages = {435-443}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Cathodic sputtering is demonstrated to be effective in synthesizing thin films of molybdenum nanoparticles. An electron cyclotron resonance plasma reactor has been used as the source. The particle size distribution is found to be controllable by proper choice of the cathodic bias potential. Sizes ranging between 20 and 30 nm deposited at the optimum bias potential are found to exhibit a self assembled structure as observed by scanning tunneling microscopy. Field emission microscopic studies on these films supported on W have exhibited very stable emission current over a period of 3 h. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {ECR plasma, Field emission microscopy, Hollow cathode chemical sputtering, Mo nanoparticles, Scanning tunneling microscopy}, issn = {0042-207X}, doi = {10.1016/j.vacuum.2008.04.077}, author = {Purohit, Vishwas S. and Bhise, Ashok B. and Dey, Shirshendu and More, Mahendra A. and Dharmadhikari, C. V. and Joag, Dilip S. and Pasricha, Renu and Bhoraskar, S. V.} } @article { ISI:000283745300023, title = {Study of the effect of plasma-striking atmosphere on Fe-oxidation in thermal dc arc-plasma processing}, journal = {Journal of Vacuum Science \& Technology A}, volume = {28}, number = {6}, year = {2010}, month = {NOV}, pages = {1399-1403}, publisher = {A V S AMER INST PHYSICS}, address = {STE 1 NO 1, 2 HUNTINGTON QUADRANGLE, MELVILLE, NY 11747-4502 USA}, abstract = {

The effect of plasma-striking atmosphere: air and air+Ar-gas on the crystallization of Fe-oxide phases was studied using dc thermal arc-plasma processing route. The powders were characterized by x-ray diffraction, vibrating sample magnetometry, transmission electron microscopy, and Mossbauer spectroscopy techniques. At room temperature and O(2) rich atmosphere, arc-evaporated Fe(2+) ions oxidize into either gamma-Fe(2)O(3) or Fe(3)O(4) depending upon the combining ratio of Fe with molecular O(2). Fe/O ratio could be adjusted using proper flow rate of Ar gas to crystallize the pure gamma-Fe(2)O(3). (C) 2010 American Vacuum Society. [DOI: 10.1116/1.3504597]

}, issn = {0734-2101}, doi = {10.1116/1.3504597}, author = {Banerjee, Indrani and Khollam, Y. B. and Mahapatra, S. K. and Das, A. K. and Bhoraskar, S. V.} } @article { ISI:000292776300038, title = {Silver nanoparticle studded porous polyethylene scaffolds: bacteria struggle to grow on them while mammalian cells thrive}, journal = {Nanoscale}, volume = {3}, number = {7}, year = {2011}, month = {JUN}, pages = {2957-2963}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Silver nanoparticle studded scaffolds were prepared by exploiting the Ag+ ion reducing activity of sophorolipids-a class of {\textquoteleft}glycolipids{\textquoteright} that cap the ensuing nanoparticles as well. To achieve this, the porous polyethylene scaffolds are subjected to N-2+H-2 plasma treatment, in the first step. Subsequently the sophorolipids are covalently attached to the amine groups on the polymer surface through simple amide chemistry to yield sophorolipid grafted polymer scaffolds. These are then exposed to Ag+ ions under appropriate conditions leading to the formation of silver nanoparticles immobilized on the polymer scaffolds. It has been found that while bacteria do not survive on these silver studded scaffolds, CHO-K1 cells thrive on them making them good candidates for tissue engineering and bio-implant applications.

}, issn = {2040-3364}, doi = {10.1039/c1nr10154d}, author = {D{\textquoteright}Britto, Virginia and Kapse, Harsha and Babrekar, Harshada A. and Prabhune, Asmita and Bhoraskar, S. V. and Premnath, V. and Bhagavatula L. V. Prasad} } @article { ISI:000309024900024, title = {Swift heavy ion induced formation of Al/polymer composite layer for low thermal emissivity in the IR range}, journal = {Nuclear Instruments \& Methods in Physics Research Section B-Beam Interactions with Materials and Atoms}, volume = {287}, year = {2012}, month = {SEP}, pages = {135-140}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Composites of polymers with aluminium were formed by swift high energy ions of 150 MeV, which are used as low thermal emissivity materials for infrared wavelengths between 8-14 mu m. Emissivity and dielectric constants were studied for these structures. A semi-empirical model has been established to obtain the relation between emissivity and dielectric constant. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {composites, dielectric constant, Swift heavy ion, Thermal emissivity}, issn = {0168-583X}, doi = {10.1016/j.nimb.2012.06.005}, author = {Babrekar, Harshada A. and Jog, Jyoti Prakash and Mathe, Vikas L. and Avasthi, D. K. and Ojha, S. and Bhoraskar, S. V.} } @article {43404, title = {Surface chemical bonds, surface-enhanced Raman scattering, and dielectric constant of SiO2 nanospheres in-situ decorated with Ag-nanoparticles by electron-irradiation}, journal = {Journal of Applied Physics}, volume = {120}, year = {2016}, month = {DEC}, pages = {Article Number: 234901}, abstract = {Nanostructures of dielectric materials decorated with metal nanoparticles are of great scientific interest; however, the involved synthesis methods are complicated and require multistep chemical processing, including functionalization of the dielectric surfaces. In the present work, without chemical processes, silver nanoparticles of average sizes in the range of 11 to 15 nm were in-situ synthesized and decorated on SiO2 nanospheres in a single step process by irradiating a solution (AgNO3-polyvinylpyrrolidone (PVP)-SiO2 nanospheres) with 6 MeV electrons at 1.5 x 10(15) e(-)/cm(2), 3.0 x 10(15) e(-)/cm(2), and 4.5 x 10(15) e(-)/cm(2) fluences. The electron irradiated solutions were characterized with different surface and other techniques. The results revealed that the SiO2 nanospheres were uniformly decorated with Ag nanoparticles, and the prominent chemical bonds involved were Ag-O, Si-O-Ag, and Si-Ag. Moreover, the sizes and the decoration density of Ag nanoparticles could be tailored by varying electron fluence. The Surface-enhanced Raman scattering (SERS) of 4-aminothiophenol (4-ATP) solutions was studied using substrates in the form of thin coatings of the solutions of Ag-decorated SiO2 nanospheres. The appearance of the characteristic SERS peaks of both 4-ATP and 4, 4{\textquoteright}-dimercaptoazobenzene (4, 4{\textquoteright}-DMAB) in Raman spectra confirmed the conversion of a fraction of 4-ATP into 4, 4{\textquoteright}-DMAB in the presence of Ag nanoparticles. Composites in the form of thin films were synthesized from the mixture solutions of PVP and Ag-decorated SiO2 nanospheres. The dielectric constant of each thin film was higher as compared to polymers, and could be tailored by varying electron fluence used for decorating Ag nanoparticles. Published by AIP Publishing.}, doi = {10.1063/1.4971866}, author = {Phatangare, A. B. and Dhole, S. D. and Dahiwale, S. S. and Mathe, V. L. and Bhoraskar, S. V. and Late, Dattatray J. and Bhoraskar, V. N.} }