@article { ISI:000264095500002, title = {Parametric dependence studies on cracking of clay}, journal = {Physica A-Statistical Mechanics and its Applications}, volume = {388}, number = {8}, year = {2009}, month = {APR}, pages = {1352-1358}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We have studied the shrinkage-crack patterns formed in the process of drying of clay/water slurries employing simple laboratory experiments. Both isotropic and directional drying was studied. The objective has been to examine the correlation between the solvent, materials parameters and the crack patterns. Attempt is made to fit the observations to specific models. The dynamics of the pattern formation process and the geometric properties of the crack patterns are found to be in conformity with the hydrodynamic model by Lee and Routh [W.P. Lee, A.F. Routh, Langmuir 20 (2004) 9887]. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {clay, Cracks pattern, Hydrodynamic model}, issn = {0378-4371}, doi = {10.1016/j.physa.2008.12.039}, author = {Pasricha, Kanika and Wad, Uday and Pasricha, Renu and Ogale, Satishchandra} } @article {46370, title = {Plasmonic light harvesting of dye sensitized solar cells by Au-nanoparticle loaded TiO2 nanofibers}, journal = {Journal of Materials Chemistry A}, volume = {2}, year = {2014}, month = {FEB}, pages = {975-984}, type = {Article}, abstract = {

We report a significant enhancement in the performance of dye sensitized solar cells by using in situ Au nanoparticle (Au NP) loaded TiO2 nanofibers (Au: TiO2 NFs) as the light harvesting (LH) layer as compared to the use of only TiO2 nanofibers (NFs) as the LH layer. The Au NP: TiO2 nanofibers are prepared by electro-spinning of a precursor mixture whereby nanostructured porous TiO2 nanofibers are formed and get in situ loaded with only 4-5 nm AuNPs. The as-synthesized nanofibers are characterized by X-ray diffraction, Raman, photoluminescence (PL) and Mott-Schottky analyses. The presence of gold nanoparticles shows considerable improvements in light harvesting and the electrochemical properties of TiO2 nanofibers. A remarkable enhancement in the efficiency by 25\% is achieved with the AuNF LH layer as compared to 12\% with the NF layer, over the value without any light harvesting layer. The IPCE and impedance analyses reveal commensurate improvements. The impedance study shows a decrease in the transport resistance (R-TiO2) and an increment in the chemical capacitance and life time of the solar cell. Systematic analyses of the optical properties suggest that the enhanced light harvesting by Au NP loaded TiO2 nanofibers is caused by the role of plasmon-polariton modes at the distributed nanoscale Schottky junctions in the Au: TiO2 nanofibers.

}, issn = {2050-7488}, doi = {10.1039/c3ta13246c}, author = {Naphade, Rounak A. and Tathavadekar, Mukta and Jog, Jyoti P. and Agarkar, Shruti and Ogale, Satishchandra} } @article { ISI:000367561500004, title = {p-type NiO hybrid visible photodetector}, journal = {ACS Applied Materials \& Interfaces}, volume = {7}, number = {50}, year = {2015}, month = {DEC}, pages = {27597-27601}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A novel hybrid visible-light photodetector was created using a planar p-type inorganic NiO layer in a junction with an organic electron acceptor layer. The effect of different oxygen pressures on formation of the NiO layer by pulsed laser deposition shows that higher pressure increases the charge carrier density of the film and lowers the dark current in the device. The addition of a monolayer of small molecules containing conjugated pi systems and carboxyl groups at the device interface was also investigated and with correct alignment of the energy levels improves the device performance with respect to the quantum efficiency, responsivity, and photogeneration. The thickness of the Organic layer was also optimized for the device, giving a responsivity of 1.54 X 10(-2) A W-1 in 460 nm light.

}, keywords = {nickel oxide, organic, oxygen vacancies, photodetector, pulsed laser deposition, surface modifier}, issn = {1944-8244}, doi = {10.1021/acsami.5b09291}, author = {Mallows, John and Planells, Miguel and Thakare, Vishal and Bhosale, Reshma and Ogale, Satishchandra and Robertson, Neil} } @article { ISI:000364314500010, title = {Pulsed laser-driven molecular self-assembly of cephalexin: aggregation-induced fluorescence and its utility as a mercury ion sensor}, journal = {Photochemistry and Photobiology}, volume = {91}, number = {6}, year = {2015}, month = {NOV}, pages = {1340-1347}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A fluorescent self-assembly of cephalexin is obtained by pulsed laser irradiation process. An intense fluorescence emission is found in the self-assembled form due to occurrence of a typical aggregation-induced emission in cephalexin molecules. It is observed that fluorescence quenching of the self-assembled fluorescent nanostructures occurs in the presence of extremely low Hg++ ions concentrations (10(-7) M) as compared to other heavy metal ions e.g. Ferrous (Fe++), Manganese (Mn++), Magnesium (Mg++), Cobalt (Co++), Nickel (Ni++) and Zinc (Zn++) at the same concentrations.

}, issn = {0031-8655}, doi = {10.1111/php.12526}, author = {Singh, Pradeep Kumar and Prabhune, Asmita and Ogale, Satishchandra} } @article {42969, title = {Phenothiazine-based D-A-π-A dyes for highly efficient dye sensitized solar cells: effect of internal acceptor and non-conjugated π-spacer on device performance}, journal = {ChemPlusChem}, volume = {82}, year = {2017}, month = {FEB}, pages = {280-286}, abstract = {Three new D-A-pi-A metal-free organic dyes based on phenothiazine as a donor (D) and non-conjugated pi-spacer were designed and synthesized. The incorporation of different {\textquoteright}internal acceptors{\textquoteright} (electron traps) such as benzothiadiazole (BTD), benzotriazole (BTA), and pyridine were shown to allow systematic tuning of the energy levels and the photophysical properties. The AI-1 dye showed lower electronic disorder compared with the other two dyes. The efficiencies achieved with AI-1, AI-2, and AI-3 dyes were 8.5\% (J(sc) = 15.42 mA cm(-2), V-oc = 0.78 V, FF = 68\%), 7\% (J(sc) = 12.8 mA cm(-2), V-oc = 0.78 V, FF = 68\%) and 6.7\% (J(sc) = 11.57 mA cm(-2), V-oc = 0.82 V, FF = 68.26 \%), respectively. The incorporation of non-conjugated phenothiazine as a p-spacer in D-A-pi-A dyes showed remarkable enhancement in the photovoltaic performance of dye-sensitized solar cell (DSSC) devices. The sealed DSSC devices with iodide/tri-iodide (I-/I-3(-) @)based liquid electrolyte showed promising stability under ambient conditions.}, doi = {10.1002/cplu.201600492}, author = {Nagane, Satyawan and Ichake, Amol and Agrawal, Ishita and Sadhanala, Aditya and Friend, Richard H. and Ogale, Satishchandra and Wadgaonkar, Prakash P.} } @article {49066, title = {Photocatalytic CO2 reduction to syngas using nickel phosphide-loaded CdS under visible light irradiation}, journal = {Journal of Physics-Energy}, volume = {6}, year = {2024}, month = {APR }, pages = {025019}, type = {Article}, abstract = {

Photocatalytic CO2 reduction is a sustainable pathway to produce syngas (H-2 + CO), which is a key feedstock for the production of several important liquid fuels on the industrial scale. However, achieving an appropriate tunable ratio of H-2:CO in syngas for commercial purposes is a challenging task. In this work, we present a low-cost and non-noble metal, phosphide-based co-catalyst-Ni2P-loaded cadmium sulfide (CdS) photocatalyst system, for photocatalytic CO2 reduction. As a co-catalyst, Ni2P fosters an efficient charge separation of photoexcited charges generated in the CdS production of syngas. In total, 3 wt.\% Ni2P/CdS exhibited exceptional performance of 50.6 mu mol g(-1) h(-1) in the CO evolution rate and 115 mu mol g(-1) h(-1) in the H-2 evolution rate, with a syngas composition varying from 2 to 4 in the H-2:CO ratio. Furthermore, first-principles density functional theory calculations were performed to study the surface energetics of the catalyst system and the results are found to be consistent with our experimental findings. Indeed, they establish that the composite favors CO2 photoreduction into syngas more efficiently than pure surfaces.

}, keywords = {CdS, CO2 reduction, Photocatalysis, Syngas, transition metal phosphides}, issn = {2515-7655}, doi = {10.1088/2515-7655/ad3676}, author = {Yadav, Poonam and Kumar, Santosh and Velankanni, Nandhakumar and Kuehne, Thomas D. and Gosavi, Suresh and Raghupathy, Ramya Kormath Madam and Bhosale, Reshma and Held, Georg and Shelke, Manjusha and Ogale, Satishchandra} }