@article { ISI:000230729300026, title = {Study of correlation of structural and surface properties with electrochemical behaviour in carbon aerogels}, journal = {Journal of Materials Science}, volume = {40}, number = {14}, year = {2005}, month = {JUL}, pages = {3777-3782}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Carbon aerogel is a promising material for electrochemical double layer capacitors. In this paper carbon aerogels prepared by subcritical drying method are investigated for the change in the structure and surface properties at different pyrolysis temperatures. The important relations between structure, morphology, surface area and electrical properties were studied using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), surface area measurement and cyclic voltametry. It is shown that structure and the surface functional groups play important role in enhancement of electrochemical capacitance. The specific capacitance achieved was 114 F/gm which is quite large value for subcritically prepared carbon aerogels without any kind of activation process. (c) 2005 Springer Science + Business Media, Inc.

}, issn = {0022-2461}, doi = {10.1007/s10853-005-3318-4}, author = {Hebalkar, Neha and Arabale, G. and Sainkar, S. R. and Pradhan, S. D. and Mulla, Imtiaz S. and Vijayamohanan, K. and Ayyub, P. and Kulkarni, S. K.} } @article { ISI:000238294800037, title = {Suppression of electron-transfer characteristics of ferrocene by OTS monolayer on a silicon/electrolyte interface}, journal = {Journal of Colloid and Interface Science}, volume = {299}, number = {2}, year = {2006}, month = {JUL}, pages = {777-784}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

The passivating behavior of self-assembled monolayers (SAMs) of octadecyltrichlorosilane (OTS) on an n-type Si(100) electrode with and without a redox species like ferrocene in a polar non-aqueous medium has been investigated using techniques like contact angle measurements, Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to understand the role of the monolayer. The electron-transfer behavior of ferrocene is found to be drastically affected by the presence of monolayer and the reasons for these are analyzed as a function of the change in resistance, dielectric thickness and coverage of the monolayer. Electrochemical impedance analysis in the presence of ferrocene gives the monolayer coverage as 0.998 and the apparent rate constant calculated from this gives 4.85 x 10(-12) cm s(-1) in comparison with 4.4 x 10(-8) cm s(-1) for a similar electrode without any monolayer. A positive shift of 200 mV in the flat-band potential after monolayer formation also suggests the covalent coupling of the silane nionolayer offering a protective barrier. (c) 2006 Elsevier Inc. All rights reserved.

}, keywords = {cyclic voltammetry, ferrocene, impedance analysis, octadecyltrichlorosilane (OTS), rate constant, self-assembled monolayer (SAM)}, issn = {0021-9797}, doi = {10.1016/j.jcis.2006.03.013}, author = {Kulkarni, S. A. and Kakade, Bhalchandra A. and Mulla, Imtiaz S. and Pillai, V. K.} } @article { ISI:000249169900033, title = {Surface-state-mediated electron transfer at nanostructured ZnO multipod/electrolyte interfaces}, journal = {Journal of Physical Chemistry C}, volume = {111}, number = {35}, year = {2007}, month = {SEP}, pages = {13092-13102}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Redox kinetics of cyanoferrate(III) species adsorbed at an n-type ZnO multipod/electrolyte interface is explored using electrochemical techniques like cyclic voltammetry and impedance spectroscopy. The electrochemical impedance results are analyzed using a fluctuating energy level model, assuming isoenergetic tunneling of majority carriers through the Helmholtz layer. A shift in the slope of Mott-Schottky plots (C-sc(-2) versus E) together with evidence from cyclic voltammetry shows that the electron-transfer process is mediated by surface states formed because of the adsorption of ferricyanide ions (as evident from the results of Fourier transform infrared spectroscopy). More significantly, the pH of zero charge (point of zero zeta potential, pzzp) of ZnO multipods is found to be 4.5 (from capacitance vs pH plots) compared to that of bulk ZnO (pH 9.5), which could be explained on the basis of a lowering in the work function of the nanostructured semiconductor and its consequent susceptibility to the formation of surface states. This is in excellent agreement with our earlier observation of ultralow threshold field emission with this material in the light of the linear dependence of pzzp with work function of the electrode material. The flat-band potential of the nanostructures is found to be 200 mV more negative than that reported for bulk n-type ZnO electrodes, indicating a higher doping density in the former. A three-dimensional mapping of charge distribution in the surface states is attempted by correlating the capacitance response of the system subjected to a sinusoidal potential modulation to the semiconductor electrode with that resulting from a systematic variation of the redox potential of the dissolved acceptor (achieved by varying the pH of the electrolyte) which further reveals the polyenergetic nature of the surface states.

}, issn = {1932-7447}, doi = {10.1021/jp072695x}, author = {Parthasarathy, Meera and Ramgir, Niranjan S. and Sathe, Bhaskar R. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K.} } @article { ISI:000253181000037, title = {Synthesis, characterization of chemically deposited indium selenide thin films at room temperature}, journal = {Journal of Physics and Chemistry of Solids}, volume = {69}, number = {1}, year = {2008}, month = {JAN}, pages = {249-254}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Polycrystalline In2Se3 semiconducting thin films were prepared by using relatively simple chemical bath deposition method at room temperature by the reaction between indium chloride, tartaric acid, hydrazine hydrate and sodium selenosulphate in an aqueous alkaline medium. Various preparative conditions of thin film deposition are outlined. The as grown films were found to be transparent, uniform, well adherent and red in color. The films were characterized using X-ray diffraction (XRD), scanning electron microscopy, atomic absorption spectroscopy and energy dispersive atomic X-ray diffraction (EDAX). The XRD analysis of the film showed the presence of polycrystalline nature with hexagonal crystal structure. SEM study revels that the grains are homogenous, without cracks or pinholes and well covers the glass substrate. The optical absorption and electrical conductivity was measured. The direct optical band gap value for the films was found to be of the order of 2.35eV at room temperature and have specific electrical conductivity of the order of 10(-2) (Omega cm)(-1) showing n-type conduction mechanism. The utility of the adapted technique is discussed from the view-point of applications considering the optoelectric and structural data. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Chemical synthesis, Semiconductor}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2007.08.070}, author = {Asabe, M. R. and Chate, P. A. and Delekar, S. D. and Garadkar, K. M. and Mulla, Imtiaz S. and Hankare, P. P.} } @article { ISI:000271542900165, title = {Synthesis and characterization of CoCrxFe2-xO4 nanoparticles}, journal = {Journal of Alloys and Compounds}, volume = {485}, number = {1-2}, year = {2009}, month = {OCT}, pages = {798-801}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Spinel-phase nanocrystalline CoCrxFe2-xO4 powders (0.0 \<= x \<= 2.0) were synthesized by citrate-gel precursor method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). transmission electron microscopy (TEM) and infra-red spectroscopy (FT-IR). The XRD and selected-area electron diffraction (SAED) patterns indicated that the synthesized nanoparticles have single-phase spinet structure without the presence of any other impurities. The changes in electrical and magnetic properties of different stiochiometric compositions have also been investigated. It is seen that with increase in chromium contents, the measured magnetic hysteresis loops become narrow with decreasing trend in saturation magnetization. Electrical resistivity indicated that all the compounds are semiconducting nature. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Magnetic measurements, Sintering, transmission electron microscopy, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2009.06.087}, author = {Hankare, P. P. and Sankpal, U. B. and Patil, R. P. and Mulla, Imtiaz S. and Lokhande, P. D. and Gajbhiye, N. S.} } @article { ISI:000286307300007, title = {Synthesis of Sb-doped SnO2 nanowires and hyperbranched structures}, journal = {Science of Advanced Materials}, volume = {1}, number = {1}, year = {2009}, month = {APR}, pages = {38-43}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Branched nanostructures of semiconducting materials are of great interest for their potential applications in optoelectronic, photonic devices and sensors. We herein describe a facile single-step chemical vapor deposition route for the synthesis of Sb-SnO2 hyperbranched nanostructures comprised of elongated nanowires with 30-40 nm diameter and 10-20 Am length. The morphology and structure has been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selective area electron diffraction (SAED), and powder X-ray diffraction (XRD). Also, a possible mechanism is proposed for the growth of nanowires into the hyperbranched form on the basis of the substrate effect, the role of Au nanoparticles, and the effect of Sb doping on specific morphology evolution. Interestingly, electrical conductivity measurements as a function of temperature suggest a semiconducting behavior, despite being governed by different electron-transport mechanisms with activation energies of 0.55 and 0.17 eV, which correspond to pure SnO2 and Sb-SnO2 nanowires, respectively. A precise control over the operating parameters not only envisages custom-designed, branched structures by a simple and economical route but also offers an alternative method to the expensive and tedious nanofabrication techniques for industrial applications.

}, keywords = {Au Nanoparticles, chemical vapor deposition, Sb-SnO2 Hyperbranched Nanostructures}, issn = {1947-2935}, doi = {10.1166/sam.2009.1006}, author = {Sathe, Bhaskar R. and Patil, Mrudula and Walke, Pravin S. and Vivek, J. P. and Lele, Ashish K. and Pillai, Vijayamohanan K. and Mulla, Imtiaz S.} } @article { ISI:000276492300024, title = {Switching of hydrophilic to ultra hydrophilic properties of flower-like gold nanostructures}, journal = {Applied Surface Science}, volume = {256}, number = {13}, year = {2010}, month = {APR}, pages = {4192-4195}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Flower-like morphologies of gold nanostructures were obtained via chemical method by controlling molar concentration ratio of reducing agent and precursor. Chloroauric acid was used as a metal precursor while tri-sodium citrate as the reducing agent. These flower-like structures were characterized by UV-vis spectroscopy, Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) techniques. The basic crystallite size calculated via XRD measurement was found to be similar to 10 nm and remain unaffected by the different concentration ratios. The coating of these structures was made over clean glass substrate and analyzed for wettability by measuring their water contact angles. Our analysis indicates that the coatings of hierarchical flower-like structures of gold are able to provide ultra hydrophilic properties to glass substrate. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Gold flower-like nanostructures, Ultra hydrophilic, Wettability}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2010.01.123}, author = {Dhumale, Vinayak A. and Shah, Preeti V. and Mulla, Imtiaz S. and Sharma, R. B.} } @article { ISI:000278744500055, title = {Synthesis and characterization of nanocrystalline zinc substituted nickel ferrites}, journal = {Journal of Alloys and Compounds}, volume = {496}, number = {1-2}, year = {2010}, month = {APR}, pages = {256-260}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Nanocrystalline zinc substituted nickel ferrites, Ni(1-x)Zn(x)Fe(2)O(4) (0.0 \<= x \<= 1.0) have been prepared by citrate gel auto-combustion method. The effect of zinc ion content on structural, electrical transport and magnetic properties has been studied. The X-ray diffraction (XRD) pattern revealed that, all the compositions possess single-phase spinel structure. The nano-sized grain structure formation was confirmed by transmission electron microscopy (TEM). The dc electrical resistivity shows the samples are semiconducting in nature. The magnetic measurements showed that the composition Ni(0.6)Zn(0.4)Fe(2)O(4) has maximum saturation magnetization (M(s)) while high coersivity (Hc) for ZnFe(2)O(4). Thermoelectric power measurement study showed that the compounds, with x \<= 0.4 are p-type and for x \> 0.4 behaves n-type conduction mechanism. (C) 2010 Published by Elsevier B.V.

}, keywords = {Electron microscopy, Magnetic, Sintering, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2010.01.009}, author = {Hankare, P. P. and Sankpal, U. B. and Patil, R. P. and Mulla, Imtiaz S. and Sasikala, R. and Tripathi, A. K. and Garadkar, K. M.} } @article { ISI:000274839100053, title = {Synthesis and characterization of nickel selenide thin films deposited by chemical method}, journal = {Journal of Alloys and Compounds}, volume = {490}, number = {1-2}, year = {2010}, month = {FEB}, pages = {228-231}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Nickel selenide thin films have been deposited using chemical bath method on non-conducting glass substrates in a tartarate bath containing nickel sulphate octahydrate, hydrazine hydrate, sodium seleno-sulphate in an aqueous alkaline medium. The grown films were uniform, well adherent and black in color. The films were characterized using X-ray diffraction, scanning electron microscopy, optical absorption and electrical measurements. The nickel selenide thin film revealed polycrystalline nature with hexagonal system. The direct optical band gap of the film was found to be 1.61 eV. Electrical resistivity of film was observed in the order of 10(3) (Omega cm) with p-type conduction mechanism. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Crystal growth, Semiconductors, Thin films, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2009.09.132}, author = {Hankare, P. P. and Jadhav, B. V. and Garadkar, K. M. and Chate, P. A. and Mulla, Imtiaz S. and Delekar, S. D.} } @article { ISI:000287058100062, title = {Synthesis and characterization of chemically deposited nickel substituted CdSe thin film}, journal = {Journal of Alloys and Compounds}, volume = {509}, number = {6}, year = {2011}, month = {FEB}, pages = {2948-2951}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The technologically important Cd(0.5)Ni(0.5)Se thin film has been developed by solution growth technique on non-conducting glass substrate in tartarate bath containing Cd(+2), Ni(+2) ions and sodium selenosulphate in an aqueous alkaline medium at room temperature. Various preparative conditions of the thin films are outlined. The films were characterized by X-ray diffraction, scanning electron microscope, optical absorption and electrical measurements. The X-ray diffraction study indicates that the film is polycrystalline in nature with hexagonal phase. Scanning electron micrograph shows that the film is homogeneous with well-defined grains. The films have high optical absorption coefficient. Thermoelectric power measurement shows p-type conduction mechanism. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Crystal growth, Electrical conductivity, thin film}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2010.11.165}, author = {Hankare, P. P. and Jadhav, B. V. and Chate, P. A. and Sathe, D. J. and Mulla, Imtiaz S.} } @article { ISI:000292555200034, title = {Synthesis and characterization of cobalt substituted zinc ferri-chromites prepared by sol-gel auto-combustion method}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {22}, number = {8}, year = {2011}, month = {AUG}, pages = {1109-1115}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Mixed metal oxides having spinel structure shows interesting structural properties. In the present investigation, cobalt substituted zinc ferri-chromites were prepared by sol-gel auto-combustion method. The completion of solid state reaction and the formation of spinel phase were identified using X-ray diffraction technique. All the compounds exhibit cubic spinel symmetry and lattice constant shows an irregular trend with substitution of Co. Infra-red spectral studies shows an two strong bands, one around 600 cm(-1) which is attributed to the intrinsic vibrations of tetrahedral complexes and the other at 400 cm(-1) is due to octahedral one. The morphology and size of the particles was found out by scanning electron microscopy while the elemental compositions by elemental dispersive X-ray spectroscopy. The various compounds of the present system Zn1-xCoxFeCrO4 were also investigated for their thermal and electronic studies.

}, issn = {0957-4522}, doi = {10.1007/s10854-010-0268-7}, author = {Hankare, P. P. and Vader, V. T. and Sankpal, U. B. and Patil, R. P. and Jadhav, A. V. and Mulla, Imtiaz S.} } @article { ISI:000291293600027, title = {Synthesis of cube-shaped gold nanostructures by electron irradiation}, journal = {Materials Letters}, volume = {65}, number = {11}, year = {2011}, month = {JUN}, pages = {1605-1607}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The needle-like gold nanostructures were synthesized by using chloroauric acid (HAuCl(4)) as a metal precursor and sodium borohydride (NaBH(4)) as the reducing agent. These needle-like nanostructures of gold were irradiated with high energy electrons (E-6 MeV, phi similar to 10(12) e cm(-2) s(-1)). The pre- and post-irradiated gold nanostructures were characterized by Scanning Electron Microscopy (SEM), UV-vis spectroscopy, X-ray Diffraction (XRD) and contact angle measurement (GBX-Model Digidrop) techniques. The results of the SEM revealed that after electron irradiation, the needle-like gold structures got fragmented into identical cube-shaped gold nanostructures, though of different sizes. The XRD analysis indicated that the average crystallite size of the gold nanostructures remained unchanged even after irradiation with high energy electrons. A glass surface showed hydrophilic behavior when coated with needle-like nanostructures and became ultra hydrophilic when coated with cube-shaped gold nanostructures. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Gold nanostructures, High energy electron irradiation, Nanostructured materials, Radiation damage, Surfaces, Ultra hydrophilic surfaces}, issn = {0167-577X}, doi = {10.1016/j.matlet.2011.02.053}, author = {Dhumale, Vinayak A. and Gangwar, Rajesh K. and Shah, Preeti V. and Bhoraskar, Vasant N. and Mulla, Imtiaz S. and Sharma, Rishi B.} } @article { ISI:000288218300045, title = {Synthesis of single crystalline CdS nanocombs and their application in photo-sensitive field emission switches}, journal = {Nanoscale}, volume = {3}, number = {3}, year = {2011}, month = {JAN}, pages = {1078-1083}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Single crystalline CdS nanocombs were synthesized by a thermal evaporation route. The photo-sensitive field emission current shows a reproducible switching behavior, with a rise in current level of nearly five times the initial preset value of similar to 1 mu A. An ultra low turn-on field, required to draw an emission current density of similar to 0.1 mu A cm(-2) (100 nA), is found to be similar to 0.26 V mu m(-1) (260 V), which is much lower than the reported values for various other CdS nanostructures. Upon illumination with visible light the CdS nanocombs act as a photo field emission switch. At an applied field of similar to 0.65 V mu m(-1) the current densities are observed to be similar to 14.6 mu A cm(-2) and similar to 26.9 mu A cm(-2), without and with light illumination, respectively. The average emission current is seen to be stable over the duration of measurement for two preset values. The high sensitivity and fast response in the visible range indicates that the CdS nanocombs can be used as a photo-sensitive field emitting switch in device applications, and also in pulsed electron beam technology.

}, issn = {2040-3364}, doi = {10.1039/c0nr00659a}, author = {Chavan, Padmakar G. and Badadhe, Satish S. and Mulla, Imtiaz S. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000309645000013, title = {Studies on the resistive response of nickel and cerium doped SnO2 thick films to acetone vapor}, journal = {Ceramics International}, volume = {38}, number = {8}, year = {2012}, month = {DEC}, pages = {6171-6179}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Undoped and Ni, Ce-doped nanocrystalline tin oxide were synthesized by co-precipitation route. Doped as well as undoped SnO2 compositions revealed single phase structure without any impurity. The lattice constant of SnO2 increases and the grain size decreases with doping of Ni and Ce. The responses of the sensing elements are evaluated by measuring the resistance change upon exposure to various test gases such as liquid petroleum gas (LPG), acetone, ethanol and ammonia. In comparison to LPG, ethanol, and ammonia the response towards acetone vapor increases markedly on simultaneous doping of Ni and Ce. For acetone vapors with 500 ppm at 300 degrees C, the undoped SnO2 shows 31\% response, while with individual Ni or Ce doping it increases to 38 and 60\%, respectively, however with simultaneous doping of Ni and Ce there is a significant enhancement up to 92\%. The results of gas sensing measurements reveal that the thick films deposited on alumina substrates using screen printing technique give selectively a high response of (87\%) with fast recovery (similar to 1 min) towards 100 ppm acetone at 300 degrees C. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {(Ni plus Ce)-doping, Acetone vapor, Screen-printing, SnO2}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2012.04.068}, author = {Bagal, L. K. and Patil, J. Y. and Mulla, Imtiaz S. and Suryavanshi, S. S.} } @conference {45824, title = {Single SnO2 Nanowire: field emission investigations}, booktitle = {2016 29th International Vacuum Nanoelectronics Conference (IVNC)}, year = {2016}, month = {JUL}, publisher = {IEEE, 345 E 47th St, New York, NY 10017 USA}, organization = {IEEE, 345 E 47th St, New York, NY 10017 USA}, address = {345 E 47th St, New York, NY 10017 USA}, abstract = {

The present work deals with the field emission study on multiple SnO2 nanowires synthesized by simple thermal evaporation method. For the realistic analysis of the Fowler Nordheim plot of the semiconducting SnO2, field emission behavior of a single nanowire is studied. A relevant model explaining the field emission mechanism from the single SnO2 nanowire is also proposed by the authors.

}, keywords = {SnO2 nanowire}, isbn = {978-1-5090-2419-3}, author = {Joshi, D. and Joag, Dilip S. and Mulla, Imtiaz S. and Late, Dattatray J.} } @article {43629, title = {SnS2 nanoflakes for efficient humidity and alcohol sensing at room temperature}, journal = {RSC Advances}, volume = {6}, year = {2016}, month = {OCT}, pages = {105421-105427}, abstract = {We report a one step facile hydrothermal synthesis of layered SnS2 nanoflakes. The as-synthesized nanosheets are characterized using X-ray diffraction, Raman spectroscopy and Transmission Electron Microscopy (TEM). The humidity sensing behavior of SnS2 nanoflake sensor device were investigated in the range of 11-97\% of relative humidity (RH) at room temperature. The response time of similar to 85 s and recovery time of similar to 6 s were observed for the SnS2 nanoflake based humidity sensor. A maximum sensitivity of 11.300\% is recorded. We also investigate the SnS2 nanoflake based alcohol sensing properties towards methanol, ethanol and iso-propyl alcohol. An exclusive selectivity towards methanol with a response of 1580 is shown as compared to other analytes. The response time of similar to 67 s and recovery time of just 5 s were observed for the SnS2 nanoflake based methanol sensor.}, doi = {10.1039/c6ra21252b}, author = {Bharatula, Lakshmi Deepika and Erande, Manisha B. and Mulla, Imtiaz S. and Rout, Chandra Sekhar and Late, Dattatray J.} }