@article { ISI:000229103900015, title = {Nanostructured tin oxide: synthesis and gas-sensing properties}, journal = {Materials Chemistry and Physics}, volume = {92}, number = {2-3}, year = {2005}, month = {AUG}, pages = {384-388}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Pure and Ru-doped nanostructured SnO2 sensing materials were synthesized using a modified Pechini route. Incorporation of Ru in SnO2 results in the reduction of particle size (8.3 nm) compared with that of the pure SnO2 (28.2 nm). Moreover, the sensor exhibited a reasonably good sensitivity towards both H-2 and liquified petroleum gas (LPG). The effect of Ru incorporation, operating temperature, and gas concentration on the structure, morphology, and sensitivity is discussed using the results of X-ray diffraction (XRD), and scanning electron microscopy (SEM) along with sensing performance. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {hydrogen and hydrocarbon sensor, Nanostructure, ruthenium, tin oxide}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.01.050}, author = {Niranjan, R. S. and Hwang, Young Kyu and Kim, D. K. and Jhung, S. H. and Chang, J. S. and Mulla, Imtiaz S.} } @article { ISI:000241849900010, title = {Novel chemical synthetic route and characterization of zinc selenide thin films}, journal = {Journal of Physics and Chemistry of Solid}, volume = {67}, number = {11}, year = {2006}, month = {NOV}, pages = {2310-2315}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Zinc selenide (ZnSe) thin film have been deposited using chemical bath method on non-conducting glass substrate in a tartarate bath containing zinc sulfate, ammonia, hydrazine hydrate, sodium selenosulfate in an aqueous alkaline medium at 333 K. The deposition parameter of the ZnSe thin film is interpreted in the present investigation. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), optical absorption, electrical measurements, atomic absorption spectroscopy (AAS). The ZnSe thin layers grown with polycrystalline zinc blende system along with some amorphous phase present in ZnSe film. The direct optical band gap {\textquoteleft}E-g{\textquoteright} for the film was found to be 2.81 eV and electrical conductivity in the order of 10(-8)(Omega cm)(-1) with n-type conduction mechanism. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {chalcogenides, electronic materials}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2006.05.001}, author = {Hankare, P. P. and Chate, P. A. and Delekar, S. D. and Asabe, M. R. and Mulla, Imtiaz S.} } @article { ISI:000266524700010, title = {Nanostructured nickel ferrite: a liquid petroleum gas sensor}, journal = {Ceramics International}, volume = {35}, number = {5}, year = {2009}, month = {JUL}, pages = {1793-1797}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The present investigation deals with the synthesis of nanostructured nickel ferrite (NiFe(2)O(4)) and their liquid petroleum gas-sensing characteristics. The 15-20 nm size nickel ferrite has been synthesized at 700 degrees C by a simple molten-salt route using sodium chloride as grain growth inhibitor. These nanoparticles exhibit significantly high response towards liquid petroleum gas (LPG) in comparison with ethanol vapor, hydrogen sulfide, ammonia and hydrogen. The gas response towards various gases at their 200 ppm concentrations is investigated at 200-450 degrees C. Different characterization techniques have been employed, such as differential thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM) to study the crystallite size, structure and morphology. The results suggest possibility of utilization of the nanostructured nickel ferrite, without addition of any precious metal ion, as the LPG detector. (c) 2008 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Ferrites, nanomaterial, Sensor, Spinels}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2008.10.013}, author = {Darshane, Sonali L. and Suryavanshi, S. S. and Mulla, Imtiaz S.} } @article { ISI:000330820500057, title = {Nanocrystalline Ce doped CoFe2O4 as an acetone gas sensor}, journal = {Ceramics International}, volume = {40}, number = {1, A}, year = {2014}, month = {JAN}, pages = {447-452}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Nanocrystalline CoFe2-xCexO4 ferrites (x=0, 0.04, 0.08) were synthesized by using the inexpensive, simple and eco-friendly molten-salt (M-S) method. Effects of Ce doping on the structural, morphological and gas sensing properties of the CoFe2O4 ferrite were investigated. X-ray diffraction (XRD) analysis revealed the formation of spinel CoFe2O4. Transmission electron microscopy (TEM) investigations showed that the synthesized ferrite is made up of very fine spherical nanoparticles. Furthermore, the gas response of nanocrystalline ferrite materials was investigated in the temperature range of 200-450 degrees C toward the reducing gases like liquefied petroleum gas (LPG), acetone, ethanol and ammonia. The sensor response was found to be sensitive and selective toward acetone as compared to other reducing gases. It is observed that the addition of Ce (4 wt\%) strongly influenced the response and the operating temperature of the sensor material and thus can serve as acetone-sensing sensors. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {CoFe2O4, Ferrite, Gas sensor, Molten-salt method, TEM}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2013.06.021}, author = {Khandekar, M. S. and Tarwal, N. L. and Mulla, Imtiaz S. and Suryavanshi, S. S.} } @article {43544, title = {Nonlinear Fowler-Nordheim behavior of a single SnO2 nanowire}, journal = {Journal of Vacuum Science \& Technology B}, volume = {35}, year = {2017}, month = {MAR}, pages = {Article Number: 02C105}, abstract = {The present work deals with the field emission study on multiple SnO2 nanowires synthesized by a simple thermal evaporation method. The randomly oriented multiple nanowires grown by the vapor-liquid-solid mechanism exhibit low turn on field (0.8V/mu m defined for the current density of 1 mu A/cm(2)) and linear Fowler-Nordheim nature (FN). However, for the understanding of the nature of the FN plot, field emission behavior of a single SnO2 nanowire is investigated. The FN plot is observed to be nonlinear in nature. A simple model explaining the field emission mechanism from the semiconducting single SnO2 nanowire is proposed. (C) 2017 American Vacuum Society.}, doi = {10.1116/1.4973949}, author = {Joshi, Padmashree D. and Joag, Dilip S. and Late, Dattatray J. and Mulla, Imtiaz S.} }