@article {43892, title = {Sorption of metaldehyde using granular activated carbon}, journal = {Journal of Water Reuse and Desalination}, volume = {7}, year = {2017}, month = {SEP}, chapter = {280-287}, abstract = {

In this work, the ability of granular activated carbon (GAC) to sorb metaldehyde was evaluated. The kinetic data could be described by an intra-particle diffusion model, which indicated that the porosity of the sorbent strongly influenced the rate of sorption. The analysis of the equilibrium sorption data revealed that ionic strength and temperature did not play any significant role in the metaldehyde uptake. The sorption isotherms were successfully predicted by the Freundlich model. The GAC used in this paper exhibited a higher affinity and sorption capacity for metaldehyde with respect to other GACs studied in previous works, probably as a result of its higher specific surface area and high point of zero charge.

}, keywords = {Degradation, Diffusion-controlled Sorption, Environmental Pollution, Granular Activated Carbon, Metaldehyde, Sorption Adsorption}, issn = {2220-1319}, doi = {10.2166/wrd.2016.074}, author = {Salvestrini, S. and Vanore, P. and Bogush, A. and Mayadevi, S. and Campos, L. C.} } @article {44506, title = {Synthesis of biomass waste derived activated carbon-NBR composites for automobile application}, journal = {Chemistry and Chemical Technology}, volume = {12}, year = {2018}, pages = {236-243}, type = {Journal Article}, abstract = {

This paper reports on usability of activated carbon obtained from areca nut shell, coconut shell, and coconut leaves as a filler to prepare NBR based composite for automobile based application. The carbon was activated by phosphoric acid (H3PO4) as dehydrating agent. The stoichiometric ratio of biomass and phosphoric acid was found to be 3:1 for the batch size of 300 g. As compared to commercially available carbon filler, the activated carbon derived from biomass waste responded better to the petrol swelling test. Among three biomass waste sources, namely, areca nut shell, coconut shell, and coconut leaves, activated carbon derived from coconut shell was appeared to be the best for percent swelling and percent deviation in hardness. The results obtained are confirmed by proximate analysis.

}, keywords = {activated carbon, composites, hardness, NBR, Phosphoric acid}, issn = {19964196}, doi = {10.23939/chcht12.02.236}, author = {Jadhav, A. and Mohanraj, G.T. and Gokarn, A. and Mayadevi, S.} } @article {49063, title = {Synthetic layered double hydroxide on biodegradable support: an efficient adsorbent for defluoridation of water}, journal = {Indian Journal of Chemical Technology }, volume = {31}, year = {2024}, month = {JAN}, pages = {152-161}, type = {Article}, abstract = {

Fluoride concentrations in drinking water above permissible levels and incidences of fluorosis among people have been reported from many parts of the world including India. Low-cost and biodegradable adsorbents are the preferred choice for the removal of fluoride from an aqueous medium. In the present study, zinc-aluminium layered double hydroxide (LDH) supported on sugarcane bagasse (raw and acid-treated) has been synthesized, characterized, and investigated for the defluoridation of water. The SEM micrographs of the supported adsorbents show good dispersion of the LDH particles on the support material. The defluoridation capacity of the LDH is enhanced by supporting it on bagasse. The adsorption capacity of supported adsorbents increased by 3-fold than the unsupported LDH adsorbent. The adsorption data have been well fitted to the Freundlich isotherm model indicating physical and multi-layer adsorption. The maximum fluoride adsorption capacity has been found to be 8.85 mg/g with 76.3\% fluoride removal when the initial fluoride concentration is 11-12 mg/L. The pseudo-second-order kinetic model has been found suitable to explain the fluoride adsorption kinetics on the supported LDH adsorbents. The present study reveals that the bagasse-supported LDH adsorbent has a high potential for defluoridation of water.

}, keywords = {adsorption kinetics, Fluoride adsorption, Layered double hydroxide, Sugarcane bagasse}, issn = {0971-457X}, doi = {10.56042/ijct.v31i1.7611}, author = {Mayadevi, S. and Kirandas, M. D. and Manilal, A. M. and Roshini, N. and Mandal, Sujata} }