@article { ISI:000233067000013, title = {Preparation and characterization of a copper based Indian traditional drug: tamra bhasma}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {39}, number = {5}, year = {2005}, month = {OCT}, pages = {951-955}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The copper based Indian traditional drug {\textquoteleft}tamra bhasma{\textquoteright} is administered for various ailments since long. Its synthesis involves treating metallic copper with plant juices and then repeated calcination in presence of air so that the metallic state is transformed into the corresponding oxide form traditionally known as {\textquoteleft}bhasma{\textquoteright}. In this work, we present a systematic characterization of this traditional drug using various techniques like X-ray diffraction (XRD), scanning electron microscopy (SEM)-energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (IR), thermogravimetry (TG) and surface area measurement. The results obtained were found to match very well with those of a standard copper oxide confirming the composition of the drug sample. In addition, some specific findings were also made which could help in interpreting the therapeutic properties of the traditional drug {\textquoteleft}tamra bhasma{\textquoteright}. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {copper oxide, crystallite size, tamra bhasma, traditional medicine, XPS of copper oxide, XRD}, issn = {0731-7085}, doi = {10.1016/j.jpba.2005.06.015}, author = {Wadekar, M. P. and Rode, C. V. and Bendale, Y. N. and Patil, K. R. and Prabhune, Asmita} } @article { ISI:000236590300058, title = {Poly(o-toluidine) coatings on copper: electrochemical synthesis from aqueous media}, journal = {Surface \& Coating Technology}, volume = {200}, number = {16-17}, year = {2006}, month = {APR}, pages = {5094-5101}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-toluidine) (POT) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-toluidine using aqueous sodium oxalate solution as supporting electrolyte. The resulting coatings were uniform, compact and strongly adherent to the Cu substrate. These coatings were characterized by using cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS). The results of these studies reveal that the sodium oxalate is suitable supporting electrolyte for the electrochemical polymerization of o-toluidine on Cu substrate. It is found that the electrochemical polymerization of o-toluidine takes place after the passivation of the Cu substrate via formation of copper oxalate (CuC2O4, H2O) layer, which is confirmed by XRD and XPS. The optical absorption spectroscopy study reveals the exclusive formation of the pernigraniline base (PB) form of POT. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Conducting polymer coatings, Copper, Corrosion resistant coatings, cyclic voltammetry, poly(o-toluidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.05.026}, author = {Shinde, V. and Mandale, A. B. and Patil, K. R. and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000235256200004, title = {Preparation of gamma-Fe2O3 nanoparticles using DC thermal arc-plasma route, their characterization and magnetic properties}, journal = {Scripta Materialia}, volume = {54}, number = {7}, year = {2006}, month = {APR}, pages = {1235-1240}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

gamma-Fe2O3 particles were prepared, for the first time, using a direct current thermal arc-plasma route. The powder was characterized using X-ray diffraction, Mossbauer spectroscopy, X-ray photoelectron spectroscopy, chemical analysis, vibrating sample magnetometry C and transmission electron microscopy. The high purity, stoichiometry and spherical morphology of the gamma-Fe2O3 particles (saturation magnetization = 79 emu g(-1) and coercivity = 348 Oe) were confirmed. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

}, keywords = {chemical analysis, DC thermal arc-plasma route, maghemite, Mossbauer spectroscopy, XPS}, issn = {1359-6462}, doi = {10.1016/j.scriptamat.2005.12.029}, author = {Banerjee, Indrani and Khollam, Y. B. and Balasubramanian, C. and Pasricha, R. and Bakare, P. P. and Patil, K. R. and Das, A. K. and Bhoraskar, S. V.} } @article { ISI:000255292000009, title = {Photocatalytic activity and characterization of sol-gel-derived Cr(III)-doped TiO(2)-coated active carbon composites}, journal = {Philosophical Magazine}, volume = {88}, number = {5}, year = {2008}, month = {APR}, pages = {767-779}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Cr(III)-doped, TiO(2)-coated active carbon (Cr-TiO(2)/AC) were prepared by a sol-gel method. The effect of supports, including TiO(2) and active carbon (AC), on the molecular structure and photocatalytic activity of chromium oxide for complete decomposition of EDTA has been examined with respect to the content of Cr on the catalyst surface. The photocatalytic activity of the Cr-TiO(2)/AC composites was evaluated in the decomposition of EDTA solution under UV irradiation. The results indicate that Cr-TiO(2)/AC has a higher efficiency in decomposition of EDTA than TiO(2), TiO(2)/AC or active carbon. This was attributed to the different functions of active carbon and chromate species. (1) Nanosize TiO(2) particles on composites were not reunited, possible because active carbon retards transformation of anatase into rutile and decreases the crystallite size. (2) Production of high concentrations of organic compound near Cr-TiO(2). (3) Carbon in active carbon causes some of the TiO(2) to reduce to Ti(3+) ions, which prevents electron-hole pair recombination. (4) Formation of polychromate species, with a stronger redox capability, on the surface of TiO(2)/AC. It was found that the addition of Cr to TiO(2) sol could suppress the grain growth of TiO(2) crystals and increase the hydroxyl content on the surface of TiO(2)/AC. The photocatalytic efficiency and activity of the composites remained good, even after three cycles.

}, keywords = {EDTA, photoactive, sol-gel, Titanium dioxide, XPS}, issn = {1478-6435}, doi = {10.1080/14786430801955261}, author = {Gambhire, A. B. and Lande, Machhindra K. and Mandale, A. B. and Patil, K. R. and Arbad, B. R.} } @article { ISI:000274292700015, title = {Polymer-supported palladium-imidazole complex catalyst for hydrogenation of substituted benzylideneanilines}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {317}, number = {1-2}, year = {2010}, month = {FEB}, pages = {111-117}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The polymer-supported palladium-imidazole complex catalyst was synthesized and characterized by various techniques Such as elemental analysis, IR spectroscopy and TG analysis. The physico-chemical properties such as bulk density, Surface studies by BET method and swelling studies of catalyst in different solvents were investigated. XPS Studies were carried out to identify the oxidation state of palladium in the catalyst. The morphology of the support and the catalyst was studied using scanning electron microscope. Using the synthesized catalyst, hydrogenation of benzylideneaniline and a few of its para Substituted derivatives was carried out at ambient conditions. The influence of variation in temperature, concentration of the catalyst as well as the substrate on the rate of reaction Was Studied. The catalyst showed an excellent recycling efficiency over six cycles without leaching of metal from the polymer support. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Benzylideneaniline, Hydrogenation, kinetics, Polymer-supported palladium-imidazole complex catalyst}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.10.030}, author = {Udayakumar, V. and Alexander, S. and Gayathri, V. and Shivakumaraiah and Patil, K. R. and Viswanathan, B.} }