@article {48299, title = {D-A-D-based unsymmetrical thiosquaraine dye for the dye-sensitized solar cells(dagger)}, journal = {Photochemistry and Photobiology}, volume = {99}, year = {2023}, month = {MAR}, pages = {529-537}, type = {Article}, abstract = {

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, pi-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor-acceptor-donor-based unsymmetrical thiosquaraine sensitizer (SQ5S) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5. The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO2 and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51\% (V-OC 610 mV, J(SC) 3.07 mA cm(-2), ff 81\%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43\% (V-OC 723 mV, J(SC) 9.3 mA cm(-2), ff 80\%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.

}, issn = {0031-8655}, doi = {10.1111/php.13769}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Maibam, Ashakiran and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {48934, title = {Aniline and indoline donors based far-red active unsymmetrical squaraine dyes for dye sensitized solar cells}, journal = {Chemphotochem}, volume = {8}, year = {2024}, month = {FEB}, type = {Article}, abstract = {

In dye-sensitized solar cells (DSSC), controlling the dye-aggregation on the metal-oxide surface by appending the alkyl groups around the donor or pi-spacer unit of the dye is a potential approach to enhance DSSC efficiency. Further, rigidification of the dye structures by cyclization modulates the photophysical properties of the sensitizer. Here a series of donor-acceptor-donor (D-A-D) type far-red active unsymmetrical squaraine dyes (SQA) have been designed and synthesized, where N,N-dimethylaniline, methylated- and branched-indoline have been used as donor units. These dyes showed absorption between 629-654 nm (lambda max) with the molar extinction coefficient of 1.49-1.94x105 M-1 cm-1. Systematic enhancements in DSSC device efficiency have been observed due to the cyclization and alkyl-groups incorporation in this set of dyes which were further enhanced with the addition of chenodeoxycholic acid (CDCA). The highest DSSC device efficiency of 4.78 \% (Jsc of 8.77 mA/cm2 and Voc of 692 mV) has been achieved for SQA3. The IPCE profile of SQA dyes indicates the contribution of aggregated structures for the photocurrent generation. Further, co-sensitization of SQA3 dye with a complementary visible light active dye AK4 showed the enhanced device efficiency of 6.27 \% with panchromatic IPCE response. Dye rigidification, and controlled aggregation of dyes on TiO2 by means of cyclization of donor unit and introducing the alkyl groups in the dye structure synergistically improve the dye-sensitized solar cell (DSSC) device performance. Donor-Acceptor-Donor (D-A-D) based unsymmetrical squaraine dye SQA3 showed the DSSC device performance of 4.78 \%.image

}, keywords = {co-sensitization, dye-sensitized solar cell, effect of alkyl chain, molecular planarity, squaraine dye}, issn = {2367-0932}, doi = {10.1002/cptc.202300160}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Maibam, Ashakiran and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {49326, title = {Far-red active unsymmetrical squaraine dyes containing N-arylated indoline donors for dye sensitized solar cells}, journal = {Photochemistry and Photobiology}, volume = {100}, year = {2024}, month = {JUL}, pages = {1116-1126}, type = {Article}, abstract = {

Squaraine dyes possess sharp far-red active transition with high extinction coefficient and form aggregates on TiO2 surface. Aggregation of dyes on TiO2 has been considered as a detrimental factor for DSSC device performance, which can be controlled by appending alkyl groups to the dye structures. Hence by integrating alkylated (alkyl groups with both in-plane and out-of-plane) aryl group with indoline moiety to make it compatible with other electrolytes and for controlling the dye-aggregation, a series of squaraine acceptor-based dyes SQA4-6 have been designed and synthesized. SQA4-6 dyes showed absorption between 642 and 653 nm (lambda max), photophysical and electrochemical studies indicated that the HOMO energy levels of this sets of dyes are well aligned with the potentials of I-/I3-\$\$ {\textbackslashmathrm{I}}_3\<\^\>{-} \$\$ and [Co(bpy)3]2+/3+ redox shuttles for better dye regeneration process. DSSC device efficiency of 3\% has been achieved for SQA5 dye with iodolyte (I-/I3-\$\$ {\textbackslashmathrm{I}}_3\<\^\>{-} \$\$) electrolyte in the presence of 0.3 mM of chenodeoxycholic acid (CDCA). The IPCE profile of DSSC device fabricated with SQA4-6 dyes indicated the contribution of aggregated structures for the photocurrent generation. Dye-sensitized solar cell (DSSC) device efficiency of 3\% (Jsc 5.72 mA cm-2, Voc 662 mV and ff 79\%) has been achieved for an unsymmetrical squaraine dye, SQA5 with iodolyte electrolyte and the incident photon to current efficiency (IPCE) profile indicates the contribution of aggregated structures for the photocurrent generation.*image

}, keywords = {aggregation of dye, arylation on N-atom of indoline donor, dye-sensitized solar cell, squaraine dye}, issn = {0031-8655}, doi = {10.1111/php.13907}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Pandya, Rinu and Vanka, Kumar and Krishnamoorthy, Kothandam and Jayaraj, Nithyanandhan} } @article {49516, title = {Effect of cyclization and alkyl group wrapping in visible-light-active unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Energy Materials}, volume = {8}, year = {2025}, month = {APR }, pages = {5017-5030}, type = {Article}, abstract = {

A series of alkyl group-appended indoline- and carboxylic acid-functionalized indolenine-based visible-light-active unsymmetrical squaraine dyes, SQA7-10, were designed, synthesized, and utilized for the dye-sensitized solar cells device fabrication. The number of alkyl group has been increased systematically on the indoline moiety to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open-circuit voltage (V-OC) by avoiding the charge recombination process. SQA7-10 dyes showed an absorption between lambda(max) 536-540 nm, with molar extinction coefficients of 1.62-2.13 x 10(5) M-1 cm(-1) in CH3CN. Further, ultraviolet-visible (UV-vis) studies on TiO2 indicated the formation of H-aggregated dyes (505-510 nm), which can be controlled by appending the alkyl groups. The energy levels of the highest occupied molecular orbital (HOMO) of these dyes are well aligned with the Nernst potentials of I-/I(3)(-)electrolyte and [Cu(tmby)(2)](+/2+) electrolytes with sufficient overpotentials required for the dye regeneration process. DSSC devices made with these dyes showed systematic enhancements of open-circuit voltage (V-OC) and device efficiency with respect to alkyl group incorporation for SQA7-10 with I-/I-3(-) electrolytes. All of the SQA dyes exhibited the device V-OC of more than 805 mV, where the introduction of alkyl groups systematically enhanced the V-OC in the order of SQA7 (805 mV) \< SQA8 (829 mV) \< SQA9 (843 mV) \< SQA10 (862 mV) without any addition of CDCA. Within the SQA dye series, SQA10 dye has achieved the highest DSSC device efficiency of 7.52\% (J(sc) of 11.16 mA/cm(2), V-oc of 862 mV, and ff of 78\%) with I-/I-3(-) electrolyte, whereas use of [Cu(tmby)(2)](+/2+) redox shuttle with SQA10 showed enhanced V-oc (1080 mV) and device efficiency (8.35\%). The IPCE profile for the device fabricated with SQA dyes showed good response at 480 and 560 nm, which indicates the photocurrent generation from the aggregated structures.

}, keywords = {aggregation of dyes, charge recombination, Dye-sensitized solar cells, indoline and indolenine donors, visible-light-activeunsymmetrical squaraine dye}, issn = {2574-0962}, doi = {10.1021/acsaem.4c03116}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Shivankar, Bhavana R. and Siby, Jesna and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} }