@article { ISI:000242931900034,
	title = {Field emission from oriented tin oxide rods},
	journal = {Thin Solid Films},
	volume = {515},
	number = {4},
	year = {2006},
	month = {DEC},
	pages = {1450-1454},
	publisher = {ELSEVIER SCIENCE SA},
	type = {Article},
	address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND},
	abstract = {<p>Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The {\textquoteleft}onset{\textquoteright} field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.</p>},
	keywords = {field emission, microstructures, scanning electron microscopy, tin oxide},
	issn = {0040-6090},
	doi = {10.1016/j.tsf.2006.04.034},
	author = {Deshpande, A. C. and Koinkar, Pankaj M. and Ashtaputre, S. S. and More, Mahendra A. and Gosavi, S. W. and Godbole, P. D. and Joag, Dilip S. and Kulkarni, S. K.}
}
@article { ISI:000270410800024,
	title = {Influence of process variables on growth of ZnO nanowires by cathodic electrodeposition on zinc substrate},
	journal = {Thin Solid Films},
	volume = {517},
	number = {24},
	year = {2009},
	month = {OCT},
	pages = {6605-6611},
	publisher = {ELSEVIER SCIENCE SA},
	address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND},
	abstract = {<p>Influence of the deposition duration and electrolyte concentration on the structural and morphological features of the ZnO thin films, grown by cathodic electrodeposition on zinc substrate followed by annealing in air at 400 degrees C, have been investigated. The surface morphology of the as-synthesized films shows two distinct features, presence of {\textquoteleft}2-dimensional nanosheets{\textquoteright} on the area near the electrolyte-air interface and {\textquoteleft}granular{\textquoteright} nanostructures, below the interface region. However, upon annealing, the formation of ZnO nanowires, possessing length of several microns and diameter less than 20 nm, on the entire substrate is observed. The X-ray and selected area electron diffraction patterns clearly confirm the polycrystalline nature of the ZnO nanowires. (C) 2009 Elsevier B.V. All rights reserved.</p>},
	keywords = {Annealing, Electrodeposition, Nanowires, photoluminescence, scanning electron microscopy, transmission electron microscopy, Zinc oxide},
	issn = {0040-6090},
	doi = {10.1016/j.tsf.2009.04.046},
	author = {Sheini, Farid Jamali and Mulla, Imtiaz S. and Joag, Dilip S. and More, Mahendra A.}
}
