@article { ISI:000339861500096, title = {Electrochemical preparation of vertically aligned, hollow CdSe nanotubes and their p-n junction hybrids with electrodeposited Cu2O}, journal = {Nanoscale}, volume = {6}, number = {15}, year = {2014}, month = {AUG}, pages = {9148-9156}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Vertically aligned, hollow nanotubes of CdSe are grown on fluorine doped tin oxide (FTO) coated glass substrates by ZnO nanowire template-assisted electrodeposition technique, followed by selective removal of the ZnO core using NH4OH. A detailed mechanism of nucleation and anisotropic growth kinetics of nanotubes have been studied by a combination of characterization tools such as chronoamperometry, SEM and TEM. Interestingly, {\textquoteleft}{\textquoteleft}as grown{\textquoteright}{\textquoteright} CdSe nanotubes (CdSe NTs) on FTO coated glass plates behave as n-type semiconductors exhibiting an excellent photo-response (with a generated photocurrent density value of similar to 470 mu A cm(-2)) white in contact with p-type Cu2O (p-type semiconductor, grown separately on FTO plates) because of the formation of a n-p heterojunction (type II). The observed photoresponse is 3 times higher than that of a similar device prepared with electrodeposited CdSe films (not nanotubes) and Cu2P on FTO. This has been attributed to the hollow 1-D nature of CdSe NTs, which provides enhanced inner and outer surface areas for better absorption of light and also assists faster transport of photogenerated charge carriers.

}, issn = {2040-3364}, doi = {10.1039/c3nr06917f}, author = {Debgupta, Joyashish and Devarapalli, Rami Reddy and Rahman, Shakeelur and Shelke, Manjusha V. and Pillai, Vijayamohanan K.} } @article { ISI:000341064800048, title = {Enhanced photoluminescence and photoactivity of plasmon sensitized nSiNWs/TiO2 heterostructures}, journal = {Physical Chemistry Chemical Physics}, volume = {16}, number = {33}, year = {2014}, month = {SEP}, pages = {17786-17791}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A light sensitive wide band gap radial heterojunction between TiO2 and nSiNWs sensitized by gold nanoparticles is reported. The surface plasmon of AuNPs influences the optical and photocurrent properties of the heterojunction considerably. Improvement in the band gap emission of TiO2 has been found at the expense of defect radiation. Excitation of AuNPs deposited on nSiNWs/TiO2 by light irradiation shows a wavelength-dependent photocurrent due to the increased photoactivity of the heterojunction.

}, issn = {1463-9076}, doi = {10.1039/c4cp01497a}, author = {Yenchalwar, Sandeep G. and Azhagan, Muniraj Vedi Kuyil and Shelke, Manjusha V.} } @article { ISI:000327771500117, title = {Evaluation of n-type ternary metal oxide NiMn2O4 nanomaterial for humidity sensing}, journal = {Sensors and Actuators B-Chemical}, volume = {191}, year = {2014}, month = {FEB}, pages = {837-843}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Synthesis of mono-dispersed oleic acid (OA) capped NiMn2O4 (NMO) nanoparticles and their use for humidity sensing is reported. Oleic acid capped NMO (NMO-cOA) nanoparticles are synthesized from nickel oleate and manganese oleate complex. NiMn2O4 is obtained by removing oleic acid capping at 500 degrees C in air. X-ray diffraction analysis shows formation of pure NiMn2O4 phase which is also confirmed by HRTEM-SAED analysis. The TEM analysis also shows that the nanoparticles are nearly mono-dispersed. Doctor bladed films of NMO nanoparticles are seen to exhibit excellent humidity sensing property. The resistivity is seen to change by two orders with humidity change from 11\% RH to 92\% RH with fairly good linearity over the entire range. The response and recovery times are also fast. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Humidity, Impedance, Nanoparticles, NiMn2O4, Oleic acid, Sensor}, issn = {0925-4005}, doi = {10.1016/j.snb.2013.10.071}, author = {Gawli, Yogesh and Badadhe, Satish S. and Basu, Aniruddha and Guin, Debanjan and Shelke, Manjusha V. and Ogale, Satishchandra} } @article {43336, title = {Enhanced electrochemical performance of polypyrrole coated MoS2 nanocomposites as electrode material for supercapacitor application}, journal = {Journal of Electroanalytical Chemistry}, volume = {782}, year = {2016}, month = {DEC}, pages = {278-287}, abstract = {Binary nanocomposites of polypyrrole (PPY) and Molybdenum disulfide (MoS2), with varying weight\% of MoS2 viz. MP1, MP2, and MP3 corresponding to 12.5, 25, and 50\% of MoS2 respectively, were prepared via. in-situ polymerization method. X-ray diffraction (XRD), field emission scanning microscopy (FESEM), and transmission electron microscopy (TEM) were employed to study the structure and morphology of the prepared nanocomposites. The electrochemical properties were studied by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) techniques. The nanocomposite electrode material MP2 reached a specific capacitance of 400 F/g at the current density 1 A/g which was higher than that of pure PPY and the other two nanocomposites viz. MP1 and MP3 having different compositions of MoS2 and PPY than that of MP2. It was noteworthy that the maximum capacitance value was obtained only for an optimum dose of MoS2 (MP2 in this case with 25\% of MoS2) and any deviation from which ultimately degraded the capacitive performance of the nanocomposite electrode material. This could be attributed to the occurrence of maximum interaction between MoS2 and PPY in the nanocomposite only at a particular concentration of its host materials. The results showed that the specific capacitance of MP2 nanocomposite declined by 7.2\% after 5000 cycles. Further, MP2 nanocomposite electrode showed much higher energy density (8.88 Wh/kg) as well as power density (2286 W/kg) which were higher than that shown by PPY electrode. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jelechem.2016.10.050}, author = {Thakur, Anukul K. and Choudhary, Ram Bilash and Majumder, Mandira and Gupta, Govind and Shelke, Manjusha V.} } @article {44181, title = {Electrochemical capacitive energy storage in PolyHIPE derived nitrogen enriched hierarchical porous carbon nanosheets}, journal = {Carbon}, volume = {128}, year = {2018}, month = {MAR}, pages = {287-295}, type = {Article}, abstract = {

Porous and interconnected electrodes based on carbon nanoarchitectures offer comprehensive advantages of large specific surface area and high porosity consequently increasing the specific capacitance of ultracapacitor energy storage systems. Emulsion-templated polymers, PolyHIPEs (Polymerized High Internal Phase Emulsions) are highly porous polymers with a structure of cages interconnected by windows thus provide suitable framework to create such porous carbon nanostructures. Herein, nitrogen enriched porous carbon nanosheets are synthesized by pyrolysis of polymer-silica hybrid PolyHIPE and subsequent silica removal. This nitrogen enriched porous carbon nanosheets when tested as an electrode for ultracapacitor, showed specific capacitance as high as 209 F/g at a current density of 1 A/g in 1 M H2SO4 with excellent capacity retention over long cycling. (c) 2017 Elsevier Ltd. All rights reserved.

}, keywords = {Energy storage, Nitrogen enriched porous carbon nanosheets, PolyHIPE template, Ultracapacitor}, issn = {0008-6223}, doi = {10.1016/j.carbon.2017.11.080}, author = {Deshmukh, Ashvini B. and Nalawade, Archana C. and Karbhal, Indrapal and Qureshi, Mohammed Shadbar and Shelke, Manjusha V.} } @article {46821, title = {Electrospun nanofibers of Tin phosphide (SnP0.94) nanoparticles encapsulated in a carbon matrix: a tunable conversion-cum-alloying lithium storage anode}, journal = {Energy \& Fuels}, volume = {34}, year = {2020}, month = {JUN}, pages = {7648-7657}, type = {Article; Proceedings Paper}, abstract = {

Anodes with improved Li storage capability are required for next-generation lithium batteries. In this work we report a convenient synthesis strategy, based on electrospinning followed by reduction and phosphorization, to prepare a tin phosphide (SnP0.94) phase in a carbon nanofiber matrix. The layered structure offered by the SnP0.94 phase, along with its small size (5-20 nm) encapsulated in the conducting carbon matrix, leads to promising electrochemical Li storage characteristics. This composite has a capacity of 750 mAh g(-1) at 100 mA g(-1) with good cycling and rate stability. Electrochemical studies revealed a faster diffusion coefficient (1.86 x 10(-11) cm(2) s(-1)) for Li in the composite compared to the bare SnP0.94 (8.57 x 10(-14) cm(2) s(-1)), confirming the promise of this class of materials for cation storage in battery anodes.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.0c01046}, author = {Yadav, Poonam and Malik, Wahid and Dwivedi, Pravin Kumari and Jones, Lathe A. and Shelke, Manjusha V.} }