@article {44642, title = {Fused fluorenylindolenine-donor-based unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {AUG}, pages = {26335-26347}, abstract = {

A series of four unsymmetrical squaraine dyes, XSQ1-4, were synthesized using a fused fluorenylindolenine-based donor unit for dye-sensitized solar cells (DSSCs). The fused structure of fluorenylindolenine helped in moving the absorption toward the near-infrared (NIR) region, and the two sp(3)-C centers available on this donor were utilized to incorporate out-of-plane alkyl chains in opposite directions to control the dye-dye interactions on the TiO2 surface. High extinction coefficient (epsilon \>= 10(5) M-1 cm(-1)) for absorbing NIR photons and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels with respect to the conduction band of TiO2 and electrolyte for charge injection and dye regeneration processes, respectively, make these dyes potential sensitizers for DSSCs. Introduction of branched alkyl groups in the pi-framework helped in controlling dye aggregation to reduce exciton quenching and assisted in TiO2 surface passivation to avoid the charge recombination process. Furthermore, having a naphthyl group on the indole part of the anchoring group containing segment helped to red-shift the absorption spectrum of dyes 15 nm toward the NIR region (XSQ3-4). Among all of the dyes under investigation, XSQ2 gave the best photovoltaic performance, having a short-circuit current density (J(SC)) of 13.99 mA cm(-2), open -circuit voltage (V-OC) of 0.66 V, and a fill factor (ff) of 0.71, with a device performance (eta) of 6.57\%. Electrochemical impedance spectroscopy revealed higher electron lifetime on TiO2 for XSQ2, which helps to avoid the charge recombination process.

}, keywords = {Dye-sensitized solar cells, fluorenylindolenine, H- and J-type aggregation, NIR absorption, out-of-plane alkyl groups, squaraine dyes}, issn = {1944-8244}, doi = {10.1021/acsami.8b09866}, author = {Bisht, Rajesh and Sudhakar, Vediappan and Kavungathodi, Munavvar Fairoos Mele and Karjule, Neeta and Nithyanandhan, Jayaraj} } @article {46421, title = {pi-Extended cis-configured unsynimetrical squaraine dyes for dye-sensitized solar cells: panchromatic response}, journal = {ACS Applied Energy Materials}, volume = {2}, year = {2019}, month = {DEC}, pages = {8464-8472}, type = {Article}, abstract = {

{Light absorbing sensitizer is the heart of the third generation photovoltaic technologies such as dye sensitized solar cells. Despite possessing large extinction coefficients for the metal-free organic dyes, the light harvesting efficiency is limited with the narrow absorption 20 profile in either visible or NIR regions of the solar spectrum. Though monolayer formation of organic sensitizers on semiconducting metal oxide surface leads to dye-dye interaction that leads to broadening the absorption profile, the contribution of the aggregated state to the power conversion process is found out to be poor. Here, we have engineered far-red active pi-extended cis-configured unsymmetrical squaraine dyes with carboxylic acid and cycnoacetic acid as anchoring groups with controlled aggregation and panchromatic light absorption by including the steric and electronic factors. The presence of sp(3)-C (out-of-plane) and N-alkyl (in-plane) groups played an important role in modulating the assembly of the dyes on the TiO2 electrode; the cis-squaraine unit helps to extend the conjugation in the NIR region besides enhancing the visible transition and the incident photon-to-current conversion efficiency profile that showed the importance of anchoring groups for the panchromatic response. Dye PSQ10 showed solar-to electric conversion with an onset of 850 nm with the device performance of 7.0\% (V-oc = 0.581 V, J(sc) = 17.06 mA/cm(2)

}, keywords = {cis-squaraine dyes, Dye aggregation, Dye-sensitized solar cells, extended far-red absorption, panchromatic response}, issn = {2574-0962}, doi = {10.1021/acsaem.9b01341}, author = {Punitharasu, Vellimalai and Kavungathodi, Munavvar Fairoos Mele and Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {46998, title = {Alkyl-group-wrapped unsymmetrical squaraine dyes for dye-sensitized solar cells: branched alkyl chains modulate the aggregation of dyes and charge recombination processes}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JAN}, pages = {2555-2565}, type = {Article}, abstract = {

Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (V-oc) and short-circuit current (J(sc)), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both J(sc) and V-oc. Hence, tailoring the factors that govern the improvement of J(sc) and V-oc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp(3)-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance V-oc from 672 (SQS1) to 718 mV (SQS6) and J(sc) from 7.95 (SQS1) to 12.22 mA/cm(2) (SQS6), with the device efficiency ranging from 3.82\% to 6.23\% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1\% (V-oc = 715 mV, J(sc) = 13.05 mA/cm(2)) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I-3(-)) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.

}, keywords = {aggregation of dye, charge injection, charge recombination, Dye-sensitized solar cells, unsymmetrical squaraines}, issn = {1944-8244}, doi = {10.1021/acsami.9b19809}, author = {Singh, Ambarish Kumar and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {48019, title = {Indoline-based donor-pi-acceptor visible-light responsive organic dyes for dye-sensitized solar cells: co-sensitization with squaraine dye for panchromatic IPCE response}, journal = {ACS Applied Energy Materials}, volume = {5}, year = {2022}, month = {FEB}, pages = {1858-1868}, type = {Article}, abstract = {

A series of metal-free indoline-based donor-pi-acceptor (D-pi-A) visible-light active organic dyes, where an indoline unit wrapped with alkyl or alkyl and glycolic (TEG) groups is used as a donor, a mono- or bi-thiophene unit is used as a pi-spacer, and cyanoacrylic acid acts as an acceptor unit, have been designed and synthesized for dye-sensitized solar cell (DSSC) application. These dyes showed three absorption bands in a dichloromethane solution: the first and second transitions are observed in the UV (337-385 nm) and visible (477-514 nm) regions and correspond to pi-pi* and intramolecular charge transfer (ICT) transition, respectively, whereas the third absorption band obtained in the near-IR (629-758 nm) region has been observed for the first time for a D-pi-A type dye architecture. Furthermore, the ICT transition band for AKT dyes showed negative solvatochromism with increasing polarity of solvents. Photovoltaic characterizations for AKT dyes have been systematically studied with a cobalt electrolyte to evaluate the effect of thiophene incorporation and alkyl group substitution by the TEG group on the DSSC device performance. Here, AKT2 showed the highest DSSC efficiency of 3.16\% with V-OC of 0.680 V and J(SC) of 6.24 mA/cm(2) without chenodeoxycholic acid (CDCA) in the AKT dye series, whereas DSSC efficiencies for AKT dyes were not affected much upon further addition of CDCA. Furthermore, AKT dyes were co-sensitized with a complementary optical responsive indoline-based SQS4 dye and showed enhanced efficiency. The combination of AKT2/SQS4 dyes with a ratio of 1:1 showed a maximum of 5.20\% co-sensitized solar cell efficiency compared to other dye combinations with the cobalt electrolyte.

}, keywords = {Dye-sensitized solar cells, indoline-based donor-pi-acceptor dye, intramolecular charge transfer, metal-free organic dye, panchromatic-light absorption, Solvatochromism}, issn = {2574-0962}, doi = {10.1021/acsaem.1c03343}, author = {Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {48746, title = {Visible-light-active unsymmetrical squaraine dyes with 1 V of open-circuit voltage for dye-sensitized solar cells}, journal = {ChemPhotoChem}, volume = {7}, year = {2023}, month = {MAY}, type = {Article}, abstract = {

A series of alkyl-group-functionalized, aniline- and indoline-donor-based, unsymmetrical visible-light-active squaraine dyes, AM1-3, were designed and synthesized. Dye-sensitized solar cell (DSSC) devices were fabricated with both I-/I-3(-) and [Cu(tmby)(2)](+/2+) electrolytes. DSSC devices sensitized with the AM1 and AM2 dyes showed relatively high-power conversion efficiency of 7.44 \% and 7.22 \%, respectively with I-/I-3(-) in the absence of chenodeoxycholic acid (CDCA) than those of the AM3 dye (5.41 \%). The [Cu(tmby)(2)](+/2+) electrolyte along with poly(3,4-ethylenedioxythiophene) (PEDOT) as cathode material showed excellent open-circuit potentials (V-OC) of 1030, 1025, and 1001 mV with the DSSC efficiency of 8.05 \%, 7.96 \%, and 5.84 \%, respectively, for the AM1, AM2, and AM3 dyes in the absence of CDCA. Here, the AM1 dye exhibited the maximum DSSC efficiency of 8.05 \% and V-OC of 1030 mV, which is the highest obtained efficiency and V-OC for the visible-light active zwitterionic unsymmetrical-squaraine dye with copper-based electrolyte.

}, keywords = {Cu electrolytes, dihedral angle, Dye-sensitized solar cells, open circuit voltage, squaraine dyes}, issn = {2367-0932}, doi = {10.1002/cptc.202200328}, author = {Singh, Amrita and Kumar Singh, Ambarish and Dixit, Ruchi and Vanka, Kumar and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} }