@article { ISI:000228575900016, title = {Asymmetric total synthesis of eicosanoid}, journal = {Arkivoc}, number = {3}, year = {2005}, month = {JAN}, pages = {144-155}, publisher = {ARKAT USA INC}, type = {Article}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

An asymmetric total synthesis of eicosanoid 4 starting from 2,2- dimethyl-( R)- 1,3- dioxolane-4- carbaldehyde is described. The key steps involved for the synthesis include modified Simmons-Smith cyclopropanation, stereoselective reduction, ring-closing metathesis (RCM) and Nozaki- Hiyama- Kishi coupling reaction.

}, keywords = {cyclopropanation, eicosanoid, lipoxygenase inhibitors, Ring-closing metathesis, Stereoselective}, author = {Mohapatra, Debendra K. and Yellol, G. S.} } @article { ISI:000227531600007, title = {New electro-active paper actuator using conducting polypyrrole: actuation behaviour in LiClO(4) acetonitrile solution}, journal = {Synthetic Metals}, volume = {149}, number = {1}, year = {2005}, month = {FEB}, pages = {53-58}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The construction of electromechanical actuator has been achieved by using the conducting polypyrrole films deposition onto a gold-coated cellophane paper. This is probably the first report of this type of paper actuator. The conducting polypyrrole was electro-generated using either galvanostatic or potentiostatic conditions at 0.5 mA/cm(2) current density or 0.7 V applied potential, respectively. The two types of actuators were constructed, namely: (1) Ppy/cellophane bi-layer; (2) Ppy/cellophane paper/Ppy tri-layer. These actuators showed a reversible and reproducible displacement in acetonitrile solution containing LiClO(4) (I M). The maximum displacement of 9.1 mm was recorded for tri-layer device and 3.5 mm for bi-layer device in 1 M LiClO(4) acetonitrile solutions. The results obtained in acetonitrile solution containing 1 M LiClO(4) shows that the actuator requires very low excitation voltage of 0.2 MV m(-1). The mechanism for this paper actuation phenomenon is addressed in this paper. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {CP-EAPap actuators, electro-active paper actuator (EAPap), large displacement actuators, lightweight actuators, Ppy/cellophane paper bi-layer, Ppy/cellophane paper/Ppy tri-layer}, issn = {0379-6779}, doi = {10.1016/j.synthmet.2004.11.001}, author = {Deshpande, S. D. and Kim, Jaehwan and Yun, S. R.} } @article { ISI:000231406400013, title = {Stereoselective syntheses of (+)-proto, (-)-gala quercitols and carba-L-rhamnose from D-(-)-quinic acid}, journal = {Tetrahedron Letters}, volume = {46}, number = {37}, year = {2005}, month = {SEP}, pages = {6235-6238}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Efficient syntheses of (+)-proto, (-)-gala quercitols and carba-L-rhamnose front D-(-)-quinic acid are described. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {(+)-proto quercitol, (-)-gala quercitol, carba-L-rhamnose, cyclohexanepentols, D-(-)-quinic acid, stereoselectivity}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.07.052}, author = {Murugan, A. Vadivel and Yadav, A. K. and Gurjar, M. K.} } @article { ISI:000231458500048, title = {Studies on conducting polymer electroactive paper actuators: effect of humidity and electrode thickness}, journal = {Smart Materials \& Structures}, volume = {14}, number = {4}, year = {2005}, month = {AUG}, pages = {876-880}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Actuators based on cellulose paper with conducting polymer (CP-EAPap) as an electrode material were constructed. The bilayer and trilayer types of actuators were fabricated by depositing conducting polypyrrole on one side and two sides of cellophane paper respectively, which was previously gold coated. By varying the deposition time, the electrode thickness was manipulated. The performance of these two types of actuators was compared with respect to humidity changes and thickness variation. The electrode thickness plays a key role in the displacement behavior of these types of actuators. The best performance at higher humidity is also characteristic of CP-EAPap actuators. The possible mechanism of actuation is addressed in this paper.

}, issn = {0964-1726}, doi = {10.1088/0964-1726/14/4/048}, author = {Deshpande, S. D. and Kim, Jaehwan and Yun, Sung-Ryul} } @article { ISI:000231000700013, title = {Synthesis of poly(1-hexene)s end-functionalized with phenols}, journal = {Polymer International}, volume = {54}, number = {9}, year = {2005}, month = {SEP}, pages = {1310-1313}, publisher = {JOHN WILEY \& SONS LTD}, type = {Article}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

Electrophilic alkylations of phenol/2,6-dimethylphenol were performed with vinylidene-terminated poly(1-hexene)s using BF3-OEt2 catalyst. Vinylidene-terminated poly(1-hexene)s with M. varying from 400 to 10000 were prepared by bulk polymerization of 1-hexene at 50 to -20 degrees C using Cp2ZrCl2/MAO catalysts. The phenol/2,6-dimethylphenol-terminated poly(1-hexene)s was characterized by NMR (H-1, C-13), UV, IR and vapor phase osmometer (VPO). The isomer distribution (ortho, para and ortholpara) was determined by P-13 NMR using a phosphitylating reagent, namely 2-chloro-1,3,2-dioxaphospholane. The number-average degree of functionality (F-n) \> 0.9 with \> 95\% para selectivity could be achieved using low-molecular-weight oligomers of poly(1-hexene)s. (c) 2005 Society of Chemical Industry.

}, keywords = {Alkylation, chain-end functionalization, functional poly(olefin)s, metallocene catalysts}, issn = {0959-8103}, doi = {10.1002/pi.1848}, author = {Yanjarappa, Mallinamadugu J. and Sivaram, Swaminathan} } @article {9}, title = {Comparative study of conductive polypyrrole and polyaniline coatings on electro-active papers}, journal = {Polymer Journal}, volume = {38}, number = {7}, year = {2006}, note = {IUPAC Symposium on Ionic Polymerization, Goa, INDIA, OCT 23-28, 2005}, month = {JAN}, pages = {659-668}, publisher = {IUPAC; Council Sci \& Ind Res; Ind Natl Sci Acad, Dept Sci \& Technol; Reliance Ind Ltd}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

{A comparative study is performed on the conductive polymer-coated electro-active paper (EAPap) actuators by aiming at improving the overall performance of the actuators. Conductive Polymer coated Electro-active Paper [

}, keywords = {conifer, glufosinate, particle bombardment, Pinus roxburghii, stable transformation}, issn = {0721-7714}, doi = {10.1295/polymj.PJ2005185}, author = {Kim, Jachwan and Deshpande, S. D. and Yun, Sungryul and Li, Qubo} } @article { ISI:000241157000039, title = {Evidence for intergranular tunnelling in polyaniline passivated alpha-Fe nanoparticles}, journal = {Nanotechnology}, volume = {17}, number = {18}, year = {2006}, month = {SEP}, pages = {4765-4772}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Nanoparticles are of immense importance both from the fundamental and application points of view. They exhibit quantum size effects which are manifested in their improved magnetic and electric properties. Mechanical attrition by high energy ball milling (HEBM) is a top down process for producing fine particles. However, fineness is associated with high surface area and hence is prone to oxidation which has a detrimental effect on the useful properties of these materials. Passivation of nanoparticles is known to inhibit surface oxidation. At the same time, coating polymer film on inorganic materials modifies the surface properties drastically. In this work a modified set-up consisting of an RF plasma polymerization technique is employed to coat a thin layer of a polymer film on Fe nanoparticles produced by HEBM. Ball-milled particles having different particle size ranges are coated with polyaniline. Their electrical properties are investigated by measuring the dc conductivity in the temperature range 10-300 K. The low temperature dc conductivity (I-V) exhibited nonlinearity. This nonlinearity observed is explained on the basis of the critical path model. There is clear-cut evidence for the occurrence of intergranular tunnelling. The results are presented here in this paper.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/17/18/039}, author = {Sunny, Vijutha and Narayanan, T. N. and Sajeev, U. S. and Joy, Pattayil Alias and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000242519200007, title = {Optically transparent magnetic nanocomposites based on encapsulated Fe3O4 nanoparticles in a sol-gel silica network}, journal = {Nanotechnology}, volume = {17}, number = {22}, year = {2006}, month = {NOV}, pages = {5565-5572}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Composite Fe3O4-SiO2 materials were prepared by the sol-gel method with tetraethoxysilane and aqueous-based Fe3O4 ferrofluids as precursors. The monoliths obtained were crack free and showed both optical and magnetic properties. The structural properties were determined by infrared spectroscopy, x-ray diffractometry and transmission electron microscopy. Fe3O4 particles of 20 nm size lie within the pores of the matrix without any strong Si-O-Fe bonding. The well established silica network provides effective confinement to these nanoparticles. The composites were transparent in the 600-800 nm regime and the field dependent magnetization curves suggest that the composite exhibits superparamagnetic characteristics.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/17/22/007}, author = {Thomas, Senoy and Sakthikumar, D. and Joy, Pattayil Alias and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000237651600037, title = {Towards the total synthesis of clavosolide A}, journal = {Tetrahedron Letters}, volume = {47}, number = {22}, year = {2006}, month = {MAY}, pages = {3781-3783}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The synthesis of the monomeric unit of clavosolide A from 1,2:5,6-di-O-isopropylidene-alpha-D-glucose is presented. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {clavosolide A, diolide, reductive oxirane opening, seco acid, Simmons-Smith cyclopropanation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.03.107}, author = {Yakambram, Pedduri and Puranik, Vedavati G. and Gurjar, Mukund K.} } @proceedings { ISI:000291657600151, title = {Ce-Al-MCM-41: an efficient catalyst for Mukaiyama-Michael reaction}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1161-1166}, publisher = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

The activity of cerium containing Al-MCM-41 mesoporous materials has been studied for carbon-carbon bond formation reaction like Mukaiyama-Michael reaction under mild liquid phase conditions. The catalysts were synthesized by hydrothermal method at 383 K for 24-36 h in Teflon-lined autoclave and characterized thoroughly by XRD, UV-VIS, TEM, EPR, XPS, (27)Al NMR, NH(3)-TPD, pyridine-IR and AAS in order to obtain well-ordered M41S type materials. The Mukiayama-Michael reactions between silyl enol ether and alpha,beta-unsaturated ketones give Michael product in very good yields (100\% selectivity). The catalysts were reusable.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Kalita, Pranjal and Kumar, Rajiv}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @conference { ISI:000291657600157, title = {Chemoselective alkane oxidations by reactive superoxovanadium(V) species in vanadosilicate molecular sieves}, booktitle = {From ZEOLITES to Porous Mof Materials: The 40th Anniversary of International ZEOLITE Conference, Proceedings of The 15th International ZEOLITE Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1205-1212}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Unlike their titanium analogs, vanadosilicate molecular sieves catalyze the oxidation of the terminal (primary) C-H bonds in paraffins. This dissimilarity is attributed to differences in the type of reactive superoxo species generated on contact with oxidant. The latter were identified and characterized by in situ EPR and DRUV-vis spectroscopic techniques. By a suitable choice of silicate structure (VS-1 or V-MCM-41), solvent and oxidant (H(2)O(2), tert.-butyl hydroperoxide or H(2)+O2()), the V-O bond covalency and mode of O-O bond cleavage in the oxo-species and thereby, the chemoselectivity in the oxidation of the terminal carbon atoms in paraffins could be controlled.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Srinivas, D. and Ratnasamy, P.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @conference { ISI:000291657600254, title = {Ethane bridged hybrid mesoporous silsesquioxanes with sulfonic acid functionalities: synthesis, characterization and catalytic applications}, booktitle = {From Zeolites to Porous Mof Materials: the 40th Anniversary of International Zeolite Conference, Proceedings of the 15th International Zeolite Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1899-1904}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Periodic mesoporous organosilicas having -CH(2)-CH(2)- groups in the framewall positions and sulfonic acid groups in the pore channels were prepared using 1,2-bis(triethoxysilyl) ethane, 3-mercaptopropyltriethoxysilane and cetyltrimethylammonium surfactant, under basic conditions, by a one-pot synthesis method. XRD, N(2) sorption isotherm and TEM analysis revealed that the mesoporous structural ordering is retained after the functionalization of organic groups while solid-state NMR techniques like (13)C CP MAS NMR and (29)Si MAS NMR show the presence of sulfonic acid groups and the stability of the mesoporous framework with integrated ethane moieties as bridging groups. The hybrid material was more active, selective and stable than the conventional sulfonic acid containing mesoporous catalysts in the Claisen-Schmidt condensation of acetophenone with benzaldehyde to form chalcone.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Shylesh, S. and Samuel, Prinson P. and Parischa, Renu and Singh, A. P.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @conference { ISI:000291657600253, title = {Immobilization of Ntn hydrolases on APTES fuctionalized SBA-15}, booktitle = {From Zeolites to Porous Mof Materials: the 40th Anniversary of International Zeolite Conference, Proceedings of the 15th International Zeolite Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1891-1898}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

APTES Functionalized mesoporous silica SBA-15 molecular sieves have been prepared and used for immobilization of Penicillin G acylase. Physico chemical characterization was done by nitrogen adsorption, powder XRD and TEM methods to understand the nature of immobilized PGA enzyme. XRD data indicate a good mesoscopic order. The characteristic hexagonal features of SBA-15 were maintained in PGA immobilized SBA-15 samples. Incorporation of PGA does not affect the original pore structure of the parent SBA-15. The adsorption of PGA on SBA-15 from buffered solutions with a pH value, 7.8 has been studied as a model protein adsorption system. The maximum activity of the immobilized enzyme was observed at pH 7.8, slightly below the isoelectric point of the enzyme. The loading capacity of immobilized PGA is 34 mg protein per 0.5 g of SBA-15. The stability of Penicillin G acylase was enhanced by the physical entrapment in SBA-15.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Shah, Pallavi and Sridevi, N. and Prabhune, Asmita and Ramaswamy, Veda}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article { ISI:000252474200009, title = {Low voltage varistor ceramics based on SnO2}, journal = {Bulletin of Materials Science}, volume = {30}, number = {6}, year = {2007}, month = {DEC}, pages = {583-586}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

The nonlinear current (I)-voltage (V) characteristics of tin dioxide doped with either Nb2O5 and CoO or Sb2O3 and CoO show promising values of nonlinear coefficient (alpha) values (similar to 11) with low breakdown voltages (E-B, similar to 40 V mm(-1)). The pentavalent antimony or niobium acts as donor and increases the electronic conductivity. The crucial parameter for obtaining low breakdown voltage is the grain size, which depends upon sintering duration and temperature of these oxide ceramics.

}, keywords = {Chemical synthesis, electronic materials, Microstructure, tin oxide, X-ray diffraction}, issn = {0250-4707}, doi = {10.1007/s12034-007-0092-8}, author = {Dhage, S. R. and Ravi, V. and Yang, O. B.} } @proceedings { ISI:000291657600051, title = {Synthesis and characterization of value added catalysts zeolite beta using environmentally detrimental flyash}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {438-443}, publisher = {Elsevier Science BV}, address = {Beijing, Peoples R China}, abstract = {

Fly ash is a major byproduct of Thermal power plant, which makes a lot of pollution to the environment due to its fineness. When a large amount of fly ash is dumped in the places near to power plants, it mixes in all segment of environment like water, air as well as soil. Though it can be utilized for different useful purposes, due to the lack of technical knowledge about how and proper motivation, no progress has been made in its utilization. It has been demonstrated that the fly ash can be used for making a value added catalyst zeolite beta by using simple and low cost process. In the present paper it is demonstrated that the fly ash can be used as a source of silica and alumina in the synthesis of value added catalyst zeolite beta. Moreover, the influence of different silica sources such as tetraethylortho silicate, silica sol and fumed silica on the physiochemical characteristics of well crystallized zeolite beta was also studied. The detailed characterization was carried out by using powder XRD, (27)Al and (29)Si MAS NMR, chemical analysis and low temperature nitrogen adsorption. Based on the data obtained from various systems containing different silica source, fumed silica is found to be most efficient source materials and showed superiority in the uniformity of aluminum distribution and possesses higher surface area.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Kasture, M. W. and Bokade, Vijay V. and Joshi, P. N. and Kumar, R.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article { ISI:000251014600008, title = {Synthesis, characterization and actuation behavior of polyaniline-coated electroactive paper actuators}, journal = {Polymer International}, volume = {56}, number = {12}, year = {2007}, month = {DEC}, pages = {1530-1536}, publisher = {JOHN WILEY \& SONS LTD}, type = {Article}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

This investigation deals with the synthesis, characterization and actuation behavior of conductive polyaniline-coated electroactive paper actuators. The actuator is made by electrochemical deposition of conductive polyaniline on a cellulose paper. The aim of the investigation was to improve the bending displacement of electroactive paper actuators. The displacement outputs of the actuators show that a trilayer is better than a bilayer configuration. The nature of the dopant ion used in the electro-generation affects the performance. A change in humidity plays a vital role in actuation performance of the actuators. Comparing the performance of electroactive paper actuators with and without a conductive polyaniline coating, the coating improves the displacement output threefold. Finally, the actuation principle mechanism is addressed. (C) 2007 Society of Chemical Industry.

}, keywords = {bending actuator, conducting polymer, electroactive polymer (EAP), polyaniline}, issn = {0959-8103}, doi = {10.1002/pi.2297}, author = {Kim, Jaehwan and Yun, Sung-Ryul and Deshpande, S. D.} } @article {Hung, title = {Synthesis of Bio-diesel and Bio-lubricant by transesterification of vegetable oil with lower and higher alcohols over heteropolyacids supported by clay (K-10)}, journal = {Process Safety and Environmental Protection}, volume = {85}, number = {B5}, year = {2007}, note = {Theoretical Chemistry Symposium 2006 (TCS 2006), Bharathidasan Univ, Trichy, INDIA, DEC 11-13, 2006}, month = {SEP}, pages = {372-377}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

{The use of different lower and higher alcohols viz; methanol, ethanol, n-propanol and n-octanol, for the synthesis of methyl, ethyl, propyl and octyl fatty acid esters by transesterification of vegetable oil (triglycerides) with respective alcohols also known as {\textquoteleft}Bio-diesel{\textquoteright} and {\textquoteleft}Biolubricants{\textquoteright} was studied in detail. The reactions were carried out in a batch process. The activity with different supports like clay (K-10), activated carbon, ZSM-5, H-beta and TS-1 were compared. The superacids (heteropolyacids, HPA) viz; Dodeca-Tungstophosphoric acid [

}, keywords = {coprecipitation, lithium aluminate, Microemulsion, Nanoparticles, sol-gel, Surfactants}, issn = {0167-577X}, author = {Bokade, Vijay V. and Yadav, G. D.} } @article {33}, title = {Synthesis of pharmaceutical intermediates by toluene benzylation over heteropoly acids on different support}, journal = {Journal of Natural Gas Chemistry}, volume = {16}, number = {2}, year = {2007}, note = {International Conference on Nano Science and Technology (ICONSAT 2006), New Delhi, INDIA, MAR 16-18, 2006}, month = {JUN}, pages = {186-192}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

{Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [

}, keywords = {heteroassembly, nanoplates, polyfunctional capping agents, shape selective synthesis of gold-silver nanostructures, surface confinement}, issn = {1533-4880}, doi = {10.1016/S1003-9953(07)60046-2}, author = {Bokade, Vijay V. and Yadav, G. D.} } @article {40}, title = {Toluene alkylation with methanol to p-xylene over heteropoly acids supported by clay}, journal = {Journal of Natural Gas Chemistry}, volume = {16}, number = {1}, year = {2007}, month = {MAR}, pages = {42-45}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

{The alkylation of toluene with methanol for the selective formation of p-xylene was systematically studied. Very few studies have been reported on the use of superacids such as heteropolyacids on cheap supports, such as clay. This article deals with the use of different heteropoly acids (HPAs), viz, Dodeca-Tungstophosphoric acid [

}, keywords = {co-crystalline, p-xylene, toluene alkylation, ZSM-12, ZSM-5}, issn = {1003-9953}, doi = {10.1016/S1003-9953(07)60024-3}, author = {Bokade, Vijay V. and Deshpande, Suvarna S. and Patil, R. and Jain, S. and Yadav, G. D.} } @conference { ISI:000291657600173, title = {Tungstophosphoric acid and zirconia supported on mesoporous silica catalyst in veratrole acetylation}, booktitle = {From ZEOLITES to Porous Mof Materials: The 40th Anniversary of International ZEOLITE Conference, Proceedings of The 15th International ZEOLITE Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1325-1330}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Tungstophosphoric acid (TPA) over zirconia dispersed uniformly in mesoporous silica (MS) channels of MCM-41 and MCM-48 was synthesised and tested for its catalytic activity in veratrole acetylation. Catalysts with different TPA loadings (5 to 50 wt.\%) on 22.4 wt.\% ZrO(2)/MCM-41 and 15 wt.\% TPA on different zirconia loadings (10-70 wt.\%)/MCM-41 were prepared and calcined at 1123 K. Catalysts were characterised by known techniques. Mesoporous silica supports play an important role in stabilising catalytically active TPA along with tetragonal phase of zirconia. Among the catalysts, 15 wt.\% TPA/22.4 wt.\% ZrO(2)/MCM-41 calcined at 1123 K was found to have the highest acidity and be at least four times more active than neat 15 wt.\% TPA/ZrO(2) in veratrole acetylation to acetoveratrone by acetic anhydride.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Halligudi, Shivaraj B.}, editor = {Xu, R. and Gao, Z. and Chen, J. and Yan, W.} } @article { ISI:000259484700016, title = {Direct shoot organogenesis and plant regeneration from hypocotyl explants in selected genotypes of Leucaena leucocephala - a leguminous pulpwood tree}, journal = {Indian Journal of Biotechnology}, volume = {7}, number = {3}, year = {2008}, month = {JUL}, pages = {388-393}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, type = {Article}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

An efficient in vitro plant regeneration system in subabul (Leucaena leucocephala), a leguminous pulp wood tree species, was established. The induction of shoots was achieved from selected elite clones of subabul K-8, K-636 and also wild type on MS medium supplemented with 2\% sucrose and different concentrations (0.88 to 24.6 mu M) of plant growth regulators (BA, Kn, 2iP \& TDZ). The best medium for shoot regeneration was MS with 22.2 mu M BA (5 shoots per explant), followed by 22.7 mu M TDZ (4.6 shoots per explant). Addition of putriscine (9.3 mu M) to MS medium containing 22.2 mu M BA enhanced the number of multiple shoots to 7-8 but not the frequency of response. Shoot initials (measuring 1 cm) when separated and transferred on to MS medium containing 1.4 mu M GA(3) elongated to 2-5 cm in 15.20 d with 80\% frequency. The per cent frequency of shoot differentiation was almost identical in the genotypes K-8 and K-636 but it differed significantly from the wild type. Leaf yellowing and abscission in all the genotypes was curtailed by supplementing the medium with 685 mu M glutamine or 540 mu M adenine. The excised shoots were transferred to root regeneration media containing 2.46 and 4.98 mu M IBA or 2.6 and 5.3 mu M NAA. Root regeneration was noticed with 100\% frequency in all the three genotypes in presence of IBA or NAA. Plantlets were transferred successfully to the pots with 70\% survival rate with no visible morphological variations. The protocol can be utilized for mass propagation and genetic transformation studies of this important pulpwood species.

}, keywords = {hypocotyl explants, Leucaena lucocephala, pulpwood leguminous tree, shoot organogenesis}, issn = {0972-5849}, author = {Sirisha, V. L. and Prashant, S. and Ranadheer, D. and Ramprasad, P. and Shaik, N. M. and Arha, Manish and Gupta, S. K. and Srivastava, Sarneer and Yadav, A. K. and Kulkarni, P. S. and Othalathara U. Abhilash and Khan, Bashir Mohammad and Rawal, Shuban K. and Kishor, P. B. Kavi} } @article { ISI:000255689100002, title = {Effect of repeated in vitro sub-culturing on the virulence of metarhizium anisopliae against helicoverpa armigera (Lepidoptera : Noctuidae)}, journal = {Biocontrol Science and Technology}, volume = {18}, number = {4}, year = {2008}, month = {MAY}, pages = {337-355}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

The effect of repeated conidial sub-culturing of Metarhizium anisopliae on its virulence against Helicoverpa armigera (Hbner) was studied. The LT(50) observed against third instar larvae of H. armigera for the first sub-culture was 3.4 days; it increased to 4.5 and 5.6 days for the 20th and the 40th sub-cultures, respectively. The LT50 values after passage of the 40th sub-culture on H. armigera decreased to 4.4 and 3.7 days for the 40th (first in vivo) and the 40th (fifth in vivo) passages, respectively. Similarly, the LC(50) of M. anisopliae towards third instar larvae of H. armigera increased from the first sub-culture (0.17x10(4)) to (3.0x10(4)) for the 40th conidial transfers on potato dextrose agar and again decreased to 0.74x10(4) and 0.23x10(4) in the 40th (first in vivo) and the 40th (fifth in vivo) passage, respectively. Similar trends for LC(50) and LT(50) values were seen when sugarcane woolly aphid, Ceratovacuna lanigera Zehntner was used as a host. Significant variation in appressorium formation and cuticle-degrading enzyme production such as chitinase, chitin deacetylase, chitosanase and protease during subsequent sub-culturing and passage through H. armigera was observed. Though there was no effect on internal transcribed spacer (ITS) sequence pattern, interestingly, in randomly amplified polymorphic DNA (RAPD), significant differences in the band intensities and in the banding pattern for different sub-cultures of M. anisopliae were observed. As stable virulence towards the insect pest is desirable for commercialisation of a mycoinsecticide, such changes in virulence due to repeated in vitro transfer need to be monitored and minimised.

}, keywords = {appressorium formation, chitin deacetylase, chitinase, Helicoverpa armigera, in vitro sub-culturing, Lipase, Metarhizium anisopliae, Protease}, issn = {0958-3157}, doi = {10.1080/09583150801935650}, author = {Nahar, Pallavi B. and Kulkarni, Shuklangi A. and Kulye, Mahesh S. and Chavan, Santosh B. and Kulkarni, Girish and Rajendran, Armugham and Yadav, Priya D. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000260051800014, title = {Enhancement of glycerol conversion to acetol in high-temperature liquid water by high-pressure carbon dioxide}, journal = {Chemistry Letters}, volume = {37}, number = {9}, year = {2008}, month = {SEP}, pages = {926-927}, publisher = {CHEMICAL SOC JAPAN}, type = {Article}, address = {1-5 KANDA-SURUGADAI CHIYODA-KU, TOKYO, 101-8307, JAPAN}, abstract = {

Dehydration of glycerol to acetol proceeded in high-temperature liquid water at 573 K in a batch reactor. The acetol formation rate increased with an addition of high-pressure carbon dioxide.

}, issn = {0366-7022}, doi = {10.1246/cl.2008.926}, author = {Yamaguchi, Aritomo and Hiyoshi, Norihito and Sato, Osamu and Rode, Chandrashekhar V. and Shirai, Masayuki} } @article { ISI:000256178900021, title = {Heteropolyacid supported on acidic clay: a novel efficient catalyst for alkylation of ethylbenzene with dilute ethanol to diethylbenzene in presence of C-8 aromatics}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {285}, number = {1-2}, year = {2008}, month = {APR}, pages = {155-161}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Vapor phase alkylation of ethylbenzene with ethanol to diethylbenzene is industrially relevant. Diethylbenzene is an important raw material for the conversion of divinyl benzene monomer. Conventionally, it is prepared from diacetophenone by reduction. It is also prepared by vapor phase alkylation of ethylbenzene with ethylene using zeolitic catalysts. The efficacy of dodecatungsotphosphoric acid (DTPA) supported on acid treated clay has been evaluated in the current work in the alkylation of ethylbenzene with 80\% (w/w) ethanol. 15\% (w/w) DTPA/K-10 clay was found to be an efficient and robust catalyst. The use of aqueous ethanol and a mixed C-8 stream lowers the cost of production. A kinetic model is developed by studying the important process parameters with 15\% (w/w) DTPA/K-10 as the catalyst. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Alkylation, diethylbenzene, Heteropolyacid, kinetics, Solid acids}, issn = {1381-1169}, doi = {10.1016/j.molcata.2007.11.018}, author = {Bokade, Vijay V. and Yadav, Ganapati D.} } @article {43246, title = {Introduction to the density matrix renormalization group ansatz in quantum chemistry}, journal = {Frontiers in Quantum Systems in Chemistry and Physics}, volume = {18}, year = {2008}, month = {JAN}, pages = {49-65}, type = {Proceedings Paper}, abstract = {The Density Matrix Renormalisation Group (DMRG) is an electronic structure method that has recently been applied to ab-initio quantum chemistry. Even at this early stage, it has enabled the solution of many problems that would previously have been intractable with any other method, in particular, multireference problems with very large active spaces. Historically, the DMRG was not originally formulated from a wavefunction perspective, but rather in a Renormalisation Group (RG) language. However, it is now realised that a wavefunction view of the DMRG provides a more convenient, and in some cases more powerful, paradigm. Here we provide an expository introduction to the DMRG ansatz in the context of quantum chemistry.}, author = {Chan, Garnet Kin-Lic and Dorando, Jonathan J. and Ghosh, Debashree and Hachmann, Johannes and Neuscamman, Eric and Wang, Haitao and Yanai, Takeshi} } @article {43245, title = {Orbital optimization in the density matrix renormalization group, with applications to polyenes and ss-carotene}, journal = {Journal of Chemical Physics}, volume = {128}, year = {2008}, month = {APR}, doi = {10.1063/1.2883976}, author = {Ghosh, Debashree and Hachmann, Johannes and Yanai, Takeshi and Chan, Garnet Kin-Lic} } @article { ISI:000260483400085, title = {Varistor property of SnO2 center dot CoO center dot Ta2O5 ceramic modified by barium and strontium}, journal = {Journal of Alloys and Compounds}, volume = {466}, number = {1-2}, year = {2008}, month = {OCT}, pages = {483-487}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The influence of an alkali earth (Ba/Sr) element in small quantities (\< 1 at.\%) on non-linear electrical properties of 98.5\% SnO2 + 1\% CoO + 0.5\% Ta2O5 (all in at.\%) varistor system has been investigated. The non-linear coefficient increases from 33 to 52 whereas breakdown field strength varies 5025-6050 V cm(-1) for the barium-doped samples. In case of strontium-doped specimens moderate increase in non-linear coefficient but significant increase in breakdown field is observed. It is proposed that due to ionic size misfit, Ba and Sr segregates to grain boundaries thereby modifying their barrier properties. The contribution from grain boundary phase to the electrical property is confirmed by the impedance analysis. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Oxide materials, scanning electron microscopy, Sintering}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2007.11.062}, author = {Dhage, S. R. and Ravi, V. and Yang, O. B.} } @article {43242, title = {Accelerating convergence in iterative solution for large-scale complete active space self-consistent-field calculations}, journal = {International Journal of Quantum Chemistry}, volume = {109}, year = {2009}, month = {AUG}, pages = {2178-2190}, abstract = {An algorithm that accelerates the convergence of the iterative optimization of the complete active space self-consistent field (CASSCF) wavefunction so as to find a optimum solution in fewer macroiterations is described. The algorithm is oriented to large-scale CASSCF problems that are to be solved with a combination of density matrix renormalization group (DMRG) method for the configuration interaction (CI) process. The algorithm is based on the alternating (or two-step) CASSCF optimization in which the CI and molecular orbital (MO) parameters are optimized separately. Convergence ratio is improved by finding further optimized MOs from a linear extrapolation of the MO sets of the iteration history. The acceleration results in fewer diagonalizations in a total CASSCF calculation to save a considerable computational cost. The convergence performance is examined in a couple of realistic applications on SiC(3) and poly (phenyl)carbenes. For poly(phenyl)carbenes, the large-size CASSCF calculations with CAS(30e,30o) that entails full pi valence space as well as sp(2) orbital space of carbenes are performed by using the practical implementation of DMRG-CASSCF in conjunction with the acceleration technique. (C) 2009 Wiley Periodicals, Inc. Int J Quantum Chem 109: 2178-2190, 2009}, doi = {10.1002/qua.22099}, author = {Yanai, Takeshi and Kurashige, Yuki and Ghosh, Debashree and Chan, Garnet Kin-Lic} } @article { ISI:000265186800069, title = {Assembly of gold nanoparticles on single-walled carbon nanotubes by using click chemistry}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {9}, number = {5}, year = {2009}, month = {MAY}, pages = {3261-3263}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Azide moiety-functionalized gold nanoparticles were conjugated with acetylene functionalized single-walled carbon nanotubes by employing copper-catalyzed Huisgen{\textquoteright}s [3+2] dipolar cycloaddition {\textquoteleft}click chemistry{\textquoteright} reaction. Evidences of conjunction were observed by TEM, EDX and Raman images.

}, keywords = {Carbon nanotubes, Click chemistry, Functionalization, Nanoparticles}, issn = {1533-4880}, doi = {10.1166/jnn.2009.035}, author = {Rana, Sravendra and Kumar, Indresh and Yoo, Hye Jin and Cho, Jae Whan} } @article { ISI:000271982400003, title = {Characterization of clay intercalated cobalt-salen catalysts for the oxidation of p-cresol}, journal = {Applied Catalysis A-General}, volume = {370}, number = {1-2}, year = {2009}, month = {NOV}, pages = {16-23}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The intercalation of cobalt-salen complexes into the interlamelar spaces of montmorillonite clay was investigated by various characterization studies. The {\textquoteleft}{\textquoteleft}neat{\textquoteright}{\textquoteright} cobalt-salen complex showed a weight loss at 368 degrees C while the weight loss for the corresponding intercalated complex was observed at much higher temperature of 492 degrees C due to decomposition of the complex. The thermal stabilization observed was due to the host-guest interaction of clay and metal complex and thus confirmed the intercalation. The XANES spectrum of Co(salen)-mont sample revealed the change of symmetry from the tetrahedral in plane to the octahedral structure having an axial bonding of oxygen to the cobalt, indicating that cobalt atoms in Co(salen)-mont were coordinated axially with the lattice oxygen of montmorillonite. Both XANES and EXAFS results indicated that cobalt atoms in Co(salen)-mont form two additional Co-O bonds with a bond length of 0.199 nm by the intercalation while retaining the Co-salen structure. Co-salen intercalated into the montmorillonite clay showed the highest activity for the air oxidation of p-cresol, giving 88\% selectivity to the oxidation products. Effects of NaOH concentration and various solvents on the conversion and selectivity patterns also have been studied. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Cobalt-oxygen bond, Cobalt-salen, Extended X-ray absorption fine structure, Intercalation, Lattice oxygen, Montmorillonite, X-ray absorption near edge structure}, issn = {0926-860X}, doi = {10.1016/j.apcata.2009.09.003}, author = {Kshirsagar, V. S. and Garade, Ajit C. and Mane, R. B. and Patil, K. R. and Yamaguchi, A. and Shirai, M. and Rode, C. V.} } @article { ISI:000271552400019, title = {Conformational characterization of human eukaryotic initiation factor 2 alpha: a single tryptophan protein}, journal = {Biochemical and Biophysical Research Communications}, volume = {390}, number = {2}, year = {2009}, month = {DEC}, pages = {273-279}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

The alpha-subunit of the human eukaryotic initiation factor 2 (heIF2 alpha), a GTP binding protein, plays a major role in the initiation of protein synthesis. During various cytoplasmic stresses, eIF2 alpha gets phosphorylated by eIF2 alpha-specific kinases resulting in inhibition of protein synthesis. The cloned and over expressed heIF2 alpha, a protein with a single tryptophan (trp) residue was examined for its conformational characteristics using steady-state and time-resolved tryptophan fluorescence, circular dichroism (CD) and hydrophobic dye binding. The steady-state fluorescence spectrum, fluorescence lifetimes (tau(1) = 1.13 ns and tau(2) = 4.74 ns) and solute quenching studies revealed the presence of trp conformers in hydrophobic and differential polar environment at any given time. Estimation of the alpha-helix and beta-sheet content showed: (i) more compact structure at pH 2.0, (ii) distorted alpha-helix and rearranged beta-sheet in presence of 4 M guanidine hydrochloride and (iii) retention of more than 50\% ordered structure at 95 degrees C. Hydrophobic dye binding to the protein with loosened tertiary structure was observed at pH 2.0 indicating the existence of a molten globule-like structure. These observations indicate the inherent structural stability of the protein under various denaturing conditions. (C) 2009 Elsevier Inc. All rights reserved.

}, keywords = {Circular dichroism, heIF2 alpha, K562 cells, Molten globule, Steady-state and time-resolved fluorescence}, issn = {0006-291X}, doi = {10.1016/j.bbrc.2009.09.106}, author = {Sreejith, R. K. and Yadav, Viveka Nand and Varshney, Nishant K. and Berwal, Sunil K. and Suresh, C. G. and Gaikwad, Sushama M. and Pal, Jayanta K.} } @article { ISI:000267509500004, title = {Electronic manifestation of cation-vacancy-induced magnetic moments in a transparent oxide semiconductor: anatase Nb:TiO2}, journal = {Advanced Materials}, volume = {21}, number = {22}, year = {2009}, month = {JUN}, pages = {2282+}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Nb-doped anatase TiO2 thin films grown by pulsed-laser deposition show Kondo scattering in elctronic-transport measurements, providing evidence for the formation of magnetic moments. The origin of magnetism is attributed to cation (Ti) vacancies, confirmed by X-ray absorption spectroscopy and first-principle calculations. The Ti vacancies are controlled by oxygen partial pressure during growth.

}, issn = {0935-9648}, doi = {10.1002/adma.200803019}, author = {Zhang, Shixiong and Ogale, Satishchandra B. and Yu, Weiqiang and Gao, Xingyu and Liu, Tao and Ghosh, Saurabh and Das, Gour P. and Wee, Andrew T. S. and Greene, Richard L. and Venkatesan, Thirumalai} } @article { ISI:000271103500001, title = {Festschrift in Honor of Dr. B. D. Kulkarni}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {21}, year = {2009}, month = {NOV}, pages = {9355-9356}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, issn = {0888-5885}, doi = {10.1021/ie901367r}, author = {Yadav, Ganapati D. and Jayaraman, Valadi K. and Ravikumar, V.} } @article { ISI:000264092400030, title = {Impact of zinc substitution on the structural and magnetic properties of chemically derived nanosized manganese zinc mixed ferrites}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {321}, number = {8}, year = {2009}, month = {APR}, pages = {1092-1099}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mn(1-x)Zn(x)Fe(2)O(4) nanoparticles (x = 0-1) were synthesized by wet chemical co-precipitation techniques. X-ray diffraction, transmission electron microscopy and high-resolution transmission electron microscopy were effectively utilized to investigate the different structural parameters. The elemental analysis was conducted using energy-dispersive spectrum and inductively coupled plasma analysis. The magnetic properties such as magnetization and coercivity were measured using vibrating sample magnetometer. The observed magnetization values of the nanoparticles were found to be lower compared to the bulk counterpart. The magnetization showed a gradual decrease with zinc substitution except for a small increase from x = 0.2 to 0.3. The Curie temperature was found to be enhanced in the case of ferrites in the nanoregime. The variation in lattice constant, reduced magnetization values, variation of magnetization with zinc substitution, the presence of a net magnetic moment for the zinc ferrite and the enhancement in Curie temperature in Mn(1-x)Zn(x)Fe(2)O(4) all provide evidence to the existence of a metastable cation distribution together with possible surface effects at the nanoregime. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Manganese zinc ferrite}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2008.10.031}, author = {Gopalan, E. Veena and Al-Omari, I. A. and Malini, K. A. and Joy, Pattayil Alias and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000271713300024, title = {Influence of electronic factors on pd-mediated cycloisomerization: a systematic investigation of competitive 6-exo-dig versus 7-endo-dig cyclizations of sugar alkynols}, journal = {Tetrahedron}, volume = {65}, number = {47}, year = {2009}, month = {NOV}, pages = {9819-9832}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Pd-mediated cycloisomerization of 3-C-propargyl-ribo- and allofuranose derivatives was investigated in detail to understand the influence of electronic factors on the regioselectivity (6-exo- vs 7-endo) of alkynol cycloisomerization leading either to a six- or seven-membered ring. In general, the 6-exo-dig mode of cyclization is facile and is independent of electronic factors. With some of the alkynols, a regioselective (7-endo?) hydration of the alkyne unit was observed and this has been attributed to the participation of C(3)-OH. When the C(3)-OH was protected as its benzyl ether, cycloisomerization of these alkynols occurred exclusively in a 6-exo-dig mode resulting in the corresponding [3.2.1]-bicyclic ketals. Additional control experiments conducted were in support of the participation of C(3)-OH in regioselective alkyne hydration. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Alkynol cycloisomerization, Bridged bicyclic ketal, Palladium, Sonogashira coupling, Sugar alkynol}, issn = {0040-4020}, doi = {10.1016/j.tet.2009.09.071}, author = {Ramana, C. V. and Induvadana, Boddeti and Srinivas, Burgula and Yadagiri, Kommagalla and Deshmukh, Madhusudhan N. and Gonnade, Rajesh G.} } @article { ISI:000266094300033, title = {Phase behavior of hydrogenation of 2-tert-butylphenol over a charcoal-supported rhodium catalyst in carbon dioxide solvent}, journal = {Journal of Chemical and Engineering Data}, volume = {54}, number = {5}, year = {2009}, month = {MAY}, pages = {1610-1612}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Catalytic hydrogenation of 2-tert-butyl phenol over a charcoal-supported rhodium catalyst in carbon dioxide solvent at 313 K was studied in a batch reactor. To elucidate the effect of carbon dioxide pressure on the initial rate of reaction, the phase behavior of the ternary (2-tert-butylphenol-carbon dioxide-hydrogen) system was separately observed with a view cell, and the calculations of vapor-liquid equilibrium and compositions in the vapor and liquid phases inside the reactor were carried out using the Peng-Robinson equation of state. The hydrogenation behavior in the carbon dioxide solvent is discussed based on the phase behavior of the ternary system.

}, issn = {0021-9568}, doi = {10.1021/je800932w}, author = {Hiyoshi, Norihito and Masuda, Yoshio and Sato, Osamu and Yamaguchi, Aritomo and Rode, Chandrashekhar V. and Shirai, Masayuki} } @article {42456, title = {Polymeric ladderphanes}, journal = {Journal of the American Chemical Society}, volume = {131}, year = {2009}, month = {AUG}, pages = {12579{\textendash}12585}, abstract = {

A new class of polymers, which have a double-stranded polybinorbornene skeleton with multilayer planar oligoaryl linkers, defined as polymeric ladderphanes, are synthesized. The structures of these ladderphanes are determined by spectroscopic means. Photophysical studies and time-resolved fluorescence spectroscopic investigations reveal that there is a strong interaction between the chromophore linkers. Thus, Soret band splitting in the absorption spectrum of the polymer with porphyrin linker (12e), significant fluorescence quenching with oligoaryl linkers (12b-d), and excimer emission with a terphenylene-diethynylene linker (12a) are characteristic photophysical properties of these polymers. Scanning tunneling microscopy shows that polymers 12b and d exhibit a ladder-like morphology and form a supramolecular assembly leading to a two-dimensional ordered array on a highly oriented pyrolytic graphite surface.

}, doi = {10.1021/ja9035362}, author = {Chou, Chih-Ming and Lee, Shern-Long and Chen, Chih-Hsien and Biju, Akkattu T. and Wang, Hsian-Wen and Wu, Yi-Lin and Zhang, Guo-Fu and Yang, Kuang-Wei and Lim, Tsong-Shin and Huang, Min-Jie and Tsai, Po-Yu and Lin, Kin-Chuan and Huang, Shou-Ling and Chen, Chun-hsien and Luh, Tien-Yau} } @article { ISI:000271542900148, title = {On the structural, magnetic and electrical properties of sol-gel derived nanosized cobalt ferrite}, journal = {Journal of Alloys and Compounds}, volume = {485}, number = {1-2}, year = {2009}, month = {OCT}, pages = {711-717}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Nanoparticles of cobalt ferrite were synthesized by sol gel method. These particles were structurally characterized by using X-Ray Diffraction and Transmission Electron Microscopy, High Resolution Transmission Electron Microscopy, Energy Dispersive Spectrum and Inductively Coupled Plasma Analysis and the results confirmed the formation of spherically shaped nanoparticles of cobalt ferrite having a size lying in the range of 13-14 nm. The as prepared sample was sintered at 800 degrees C and the structural, magnetic and dielectric properties were measured. The dielectric properties were studied and analyzed as a function of temperature and frequency. The ac and dc conductivity studies were carried out to delve into the conduction mechanism. The existing models based on quantum mechanical tunneling were effectively employed to explain the frequency dependent conductivity. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Electronic Transport, Magnetic measurements, Magnetically ordered materials, Nanostructures, Scanning and transmission electron microscopy, Sol-gel synthesis, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2009.06.033}, author = {Gopalan, E. Veena and Joy, Pattayil Alias and Al-Omari, I. A. and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000271103500009, title = {Transesterification of edible and nonedible vegetable oils with alcohols over heteropolyacids supported on acid-treated clay}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {21}, year = {2009}, month = {NOV}, pages = {9408-9415}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In the current work, the novelty of heteropolyacid on clay (K-10) for the transesterification of vegetable oil with lower and higher alcohols is presented. Methyl esters (biodiesel) and glycerol were produced by the transesterification of vegetable oil with methanol in the presence of dodecatungestophosphoric acid (DTPA) supported on K-10 clay. The transesterification consists of three consecutive reversible reactions Diglycerides (DG) and monoglycerides (MG) are intermediate products. The optimal catalyst concentration was 5\% w/w of oil. Detailed studies were done for optimization of the process parameters. The rate of transesterification in a batch reactor increased with temperature up to 170 degrees C. Higher temperatures did not reduce the time to reach maximum conversion. The study was also extended to reactions of different edible and nonedible oils with lower and higher alcohols. The conversion of TG, DG, and MG seemed to be a second-order mechanism for the forward and reverse reactions, where the reaction system could be described as a pseudo-heterogeneous catalyzed reaction. The reaction rate constants for the TG. DG, and MG transesterification reactions were 0.12-0.84 h(-1) and were higher for the MG reaction than for the TG transesterification. The activation energies were 4.2, 26, and 7.4 kcal/mol for the TG, DG, and MG transesterification reactions, respectively. The proposed kinetic model fits the experimental results well.

}, issn = {0888-5885}, doi = {10.1021/ie801543k}, author = {Bokade, Vijay V. and Yadav, Ganapati D.} } @article { ISI:000280574600029, title = {Free radical graft copolymerization of N-vinyl-2-pyrrolidone onto k-carrageenan in aqueous media and applications}, journal = {Carbohydrate Polymers}, volume = {82}, number = {2}, year = {2010}, month = {SEP}, pages = {424-431}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

In the present article, the graft copolymer of k-carrageenan with N-vinyl-2-pyrrolidone (NVP) has been synthesized using PMS/maleic acid as a redox initiator in aqueous medium and reaction conditions have been optimized to obtain maximum \% grafting ratio (\%G). The optimum conditions of maximum grafting have been found by varying the different parameters. On increasing the concentration of maleic acid and peroxymonosulphate from 1.6 x 10(-3) to 4.8 x 10(-3) mol dm(-3) and 0.6 x 10(-2) to 2.2 x 10(-2) mol dm(-3) respectively, the initially grafting parameters increased and after a certain range of concentration grafting parameters showed decreasing trend. The small increment of concentration in hydrogen ion causes increment in percentage grafting. It was observed that the grafting parameters increase as the concentration of N-vinyl-2-pyrrolidone increases up to 16 x 10(-2) mol dm(-3) after that it decreased. The optimum condition for maximum grafting has obtained at concentration 1.0 g dm(-3) of k-carrageenan at 40 degrees C and 120 min, respectively. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {flocculation, Graft copolymer, k-Carrageenan, Metal ion uptake, N-vinyl-2-pyrrolidone, swelling}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2010.04.080}, author = {Mishra, Madan Mohan and Sand, Arpit and Mishra, Dinesh Kumar and Yadav, Mithilesh and Behari, Kunj} } @article { ISI:000277784300022, title = {Inverse magnetocaloric effect in sol-gel derived nanosized cobalt ferrite}, journal = {Applied Physics A-Materials Science \& Processing}, volume = {99}, number = {2, SI}, year = {2010}, month = {MAY}, pages = {497-503}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The magnetocaloric properties of cobalt ferrite nanoparticles were investigated to evaluate the potential of these materials as magnetic refrigerants. Nanosized cobalt ferrites were synthesized by the method of sol-gel combustion. The nanoparticles were found to be spherical with an average crystallite size of 14 nm. The magnetic entropy change (Delta S (m)) calculated indirectly from magnetization isotherms in the temperature region 170-320 K was found to be negative, signifying an inverse magnetocaloric effect in the nanoparticles. The magnitudes of the Delta S (m) values were found to be larger when compared to the reported values in the literature for the corresponding ferrite materials in the nanoregime.

}, issn = {0947-8396}, doi = {10.1007/s00339-010-5573-8}, author = {Gopalan, E. Veena and Al-Omari, I. A. and Kumar, D. Sakthi and Yoshida, Yasuhiko and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000284261800094, title = {Small molecule inhibition of phosphatidylinositol-3,4,5-triphosphate (PIP3) binding to pleckstrin homology domains}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {107}, number = {46}, year = {2010}, month = {NOV}, pages = {20126-20131}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

The PI3-kinase (PI3K) pathway regulates many cellular processes, especially cell metabolism, cell survival, and apoptosis. Phosphatidylinositol-3,4,5-trisphosphate (PIP3), the product of PI3K activity and a key signaling molecule, acts by recruiting pleckstrin-homology (PH) domain-containing proteins to cell membranes. Here, we describe a new structural class of nonphosphoinositide small molecule antagonists (PITenins, PITs) of PIP3-PH domain interactions (IC50 ranges from 13.4 to 31 mu M in PIP3/Akt PH domain binding assay). PITs inhibit interactions of a number of PIP3-binding PH domains, including those of Akt and PDK1, without affecting several PIP2-selective PH domains. As a result, PITs suppress the PI3K-PDK1-Akt pathway and trigger metabolic stress and apoptosis. A PIT-1 analog displayed significant antitumor activity in vivo, including inhibition of tumor growth and induction of apoptosis. Overall, our studies demonstrate the feasibility of developing specific small molecule antagonists of PIP3 signaling.

}, keywords = {Anticancer, PIP3 antagonist}, issn = {0027-8424}, doi = {10.1073/pnas.1004522107}, author = {Miao, Benchun and Skidan, Igor and Yang, Jinsheng and Lugovskoy, Alexey and Reibarkh, Mikhail and Long, Kai and Brazell, Tres and Durugkar, Kulbhushan A. and Maki, Jenny and Ramana, C. V. and Schaffhausen, Brian and Wagner, Gerhard and Torchilin, Vladimir and Yuan, Junying and Degterev, Alexei} } @article { ISI:000283124800028, title = {Synthesis of bio-compatible SPION-based aqueous ferrofluids and evaluation of radiofrequency power loss for magnetic hyperthermia}, journal = {Nanoscale Research Letters}, volume = {5}, number = {10}, year = {2010}, month = {OCT}, pages = {1706-1711}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Bio-compatible magnetic fluids having high saturation magnetization find immense applications in various biomedical fields. Aqueous ferrofluids of superparamagnetic iron oxide nanoparticles with narrow size distribution, high shelf life and good stability is realized by controlled chemical co-precipitation process. The crystal structure is verified by X-ray diffraction technique. Particle sizes are evaluated by employing Transmission electron microscopy. Room temperature and low-temperature magnetic measurements were carried out with Superconducting Quantum Interference Device. The fluid exhibits good magnetic response even at very high dilution (6.28 mg/cc). This is an advantage for biomedical applications, since only a small amount of iron is to be metabolised by body organs. Magnetic field induced transmission measurements carried out at photon energy of diode laser (670 nm) exhibited excellent linear dichroism. Based on the structural and magnetic measurements, the power loss for the magnetic nanoparticles under study is evaluated over a range of radiofrequencies.

}, keywords = {Magnetic heating, Magnetic hyperthermia, Magnetic relaxation, Power loss, Superparamagnetism}, issn = {1931-7573}, doi = {10.1007/s11671-010-9729-4}, author = {Mary, Antony P. Reena and Narayanan, T. N. and Sunny, Vijutha and Sakthikumar, D. and Yoshida, Yasuhiko and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000277203500017, title = {Template-assisted synthesis and characterization of passivated nickel nanoparticles}, journal = {Nanoscale Research Letters}, volume = {5}, number = {5}, year = {2010}, month = {MAY}, pages = {889-897}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Potential applications of nickel nanoparticles demand the synthesis of self-protected nickel nanoparticles by different synthesis techniques. A novel and simple technique for the synthesis of self-protected nickel nanoparticles is realized by the inter-matrix synthesis of nickel nanoparticles by cation exchange reduction in two types of resins. Two different polymer templates namely strongly acidic cation exchange resins and weakly acidic cation exchange resins provided with cation exchange sites which can anchor metal cations by the ion exchange process are used. The nickel ions which are held at the cation exchange sites by ion fixation can be subsequently reduced to metal nanoparticles by using sodium borohydride as the reducing agent. The composites are cycled repeating the loading reduction cycle involved in the synthesis procedure. X-Ray Diffraction, Scanning Electron Microscopy, Transmission Electron microscopy, Energy Dispersive Spectrum, and Inductively Coupled Plasma Analysis are effectively utilized to investigate the different structural characteristics of the nanocomposites. The hysteresis loop parameters namely saturation magnetization and coercivity are measured using Vibrating Sample Magnetometer. The thermomagnetization study is also conducted to evaluate the Curie temperature values of the composites. The effect of cycling on the structural and magnetic characteristics of the two composites are dealt in detail. A comparison between the different characteristics of the two nanocomposites is also provided.

}, keywords = {Nickel nanoparticles, Polymer-metal nanocomposites, Strongly acidic cation exchange resin, Stuctural and magnetic properties, Weakly acidic cation exchange resin}, issn = {1556-276X}, doi = {10.1007/s11671-010-9580-7}, author = {Gopalan, E. Veena and Malini, K. A. and Santhoshkumar, G. and Narayanan, T. N. and Joy, Pattayil Alias and Al-Omari, I. A. and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000291436600019, title = {Alginic acid-g-poly(N-vinylformamide) graft copolymer: synthesis, characerization, swelling, and flocculation property}, journal = {Journal of Applied Polymer Science}, volume = {121}, number = {3}, year = {2011}, month = {AUG}, pages = {1400-1407}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

The graft copolymer of N-vinylformamide with alginic acid was synthesized by free radical polymerization using potassium peroxymonosulphate and thiourea as redox pair in inert atmosphere. The optimum conditions for maximum grafting have been determined by varying the concentrations of N-vinylformamide, potassium peroxymonosulphate, thiourea, sulfuric acid, alginic acid as well as time duration and temperature. The grafting parameters increase up to the certain concentrations of N-vinylformamide, potassium peroxymonosulhate, thiourea, and hydrogen ion while thereafter grafting parameters decrease. The effect of alginic acid concentration on grafting parameters has been observed to decrease continuously. It has also been found that grafting parameters increase up to certain time and temperature, respectively, and thereafter decrease. The swelling properties of graft copolymer in terms of swelling ratio and percent swelling are investigated. Flocculation property of pure and grafted sample for both coking and noncoking coals is also investigated for the treatment of coal mine waste water. The graft copolymer has been characterized by Fourier transform infrared spectroscopy as well as thermogravimetic analysis. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 121: 1400-1407, 2011

}, keywords = {alginic acid, flocculation, Graft copolymer, N-vinylformamide, swelling}, issn = {0021-8995}, doi = {10.1002/app.33540}, author = {Sand, Arpit and Yadav, Mithilesh and Mishra, Dinesh Kumar and Behari, Kunj} } @article { ISI:000291410900022, title = {Controlling stoichiometry in low temperature synthesis of La0.7Sr0.3MnO3 nanoparticles}, journal = {Advanced Science Letters}, volume = {4}, number = {2}, year = {2011}, month = {FEB}, pages = {424-430}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Nanoparticles of complex oxides (\<20 nm) are desirable for several applications in view of the diverse range of physical properties of such oxides. However the simultaneous presence of multiple cation precursors makes the corresponding chemical synthesis non-trivial with possible intermediate evolution of secondary phases. Such phases could react at high temperatures to form the desired stoichiometry, but this process is diffusion limited and can lead to larger particles. In this work we examine the role of three different reaction and growth controlling additives, namely dextran, citric acid and hexamine, on the synthesis of the well known colossal magneto-resistive (CMR) manganite La0.7Sr0.3MnO3. We demonstrate that phase evolutions differ significantly in the three cases, and the physical properties of the products also differ dramatically. Only dextran is shown to yield the desired phase with faceted nanoparticles at as low a temperature as 600 degrees C. A high saturation moment of similar to 47 emu/gm is realized at 10 K with a good square hysteresis loop. In 650 degrees C annealed sample, room temperature magnetization of similar to 15 emu/gm was obtained, which brings the nanoparticles in the applicability domain.

}, keywords = {Citric acid, Complex Oxide, Dextran, Hexamine, hydrothermal}, issn = {1936-6612}, doi = {10.1166/asl.2011.1230}, author = {Azarifar, Ali and Yadav, P. A. and Chawla, A. K. and Jog, Jyoti Prakash and Patil, S. I. and Chandra, Ramesh and Ogale, S. B.} } @article { ISI:000297657400072, title = {Differential induction, purification and characterization of cold active lipase from Yarrowia lipolytica NCIM 3639}, journal = {Bioresource Technology}, volume = {102}, number = {22}, year = {2011}, month = {NOV}, pages = {10663-10670}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The production, purification and characterization of cold active lipases by Yarrowia lipolytica NCIM 3639 is described. The study presents a new finding of production of cell bound and extracellular lipase activities depending upon the substrate used for growth. The strain produced cell bound and extracellular lipase activity when grown on olive oil and Tween 80, respectively. The organism grew profusely at 20 degrees C and at initial pH of 5.5, producing maximum extracellular lipase. The purified lipase has a molecular mass of 400 kDa having 20 subunits forming a multimeric native protein. Further the enzyme displayed an optimum pH of 5.0 and optimum temperature of 25 degrees C. Peptide mass finger printing reveled that some peptides showed homologues sequence (42\%) to Yarrowia lipolytica LIP8p. The studies on hydrolysis of racemic lavandulyl acetate revealed that extracellular and cell bound lipases show preference over the opposite antipodes of irregular monoterpene, lavandulyl acetate. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Cell bound lipase, Cold active lipase, Extracellular lipase, Lavandulyl acetate, Oligomeric lipase}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.09.013}, author = {Yadav, K. N. Sathish and Adsul, Mukund G. and Bastawade, Kulbhushan B. and Jadhav, D. D. and Thulasiram, H. V. and Gokhale, D. V.} } @article { ISI:000289376200002, title = {Electrochemical fluorescence switching from a patternable poly(1,3,4-oxadiazole) thin film}, journal = {Macromolecular Rapid Communications}, volume = {32}, number = {8}, year = {2011}, month = {APR}, pages = {637-643}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

A highly soluble poly(1,3,4-oxadiazole) (POD) substituted with long alkyl chains was examined for electrochemical fluorescence switching. The high solubility of the polymers enabled a simple fabrication of an electrochemical cell, which showed reversible fluorescence switching between dark (n-doping) and bright (neutral) states with a maximum on/off ratio of 2.5 and a cyclability longer than 1000 cycles. Photochemical cleavage of the oxadiazole in POD allowed photo-patterning of the POD film upon exposure to UV source. The patterned POD films displayed patterned image reversibly under a step potential of +1.8/-1.8V.

}, keywords = {fluorescence, lithography, Luminescence, photochemistry, switching device}, issn = {1022-1336}, doi = {10.1002/marc.201000791}, author = {Seo, Seogjae and Kim, Yuna and You, Jungmok and Sarwade, Bhimrao D. and Wadgaonkar, Prakash P. and Menon, Shamal K. and More, Arvind S. and Kim, Eunkyoung} } @article { ISI:000294373200122, title = {Environmental potential applications of alkali metal exchanged zeolite x in carbon dioxide adsorption}, journal = {Research Journal of Chemistry and Environment }, volume = {15}, number = {2}, year = {2011}, month = {JUN}, pages = {661-671}, publisher = {DR JYOTI GARG}, address = {SECTOR A/80 SCHEME NO 54, VIJAY NAGAR, A B ROAD, INDORE MP, 452 010, INDIA}, abstract = {

The increasing atmospheric CO2 concentration, mainly caused by the Thermal Power Stations, Industrial sector and fossil fuel combustion, has led to consequences of global warming. Zeolitic adsorption processes is more promising, energy saving and viable method for CO2 removal in Comparison to other technologies. In order to examine the behavior and to establish the trends in carbon dioxide sorption, NaX zeolite (Si/Al = 1.15) and it{\textquoteright}s the modified forms with identical degree (55.5 +/- 2.5) of exchange by K+, Rb+ and Cs+ cations have been selected., The samples were characterized by powder XRD, Low temperature nitrogen adsorption/desorption measurements, chemical analysis and also for the intermediate electronegativity and the partial charges on the atoms using Sanderson{\textquoteright}s electronegativity equalization principle. The isotherms of carbon dioxide using these NaX, NaKX, NaRbX and NaCsX samples were measured at an interval of 30 K in the temperature range of 273 to 363 K up to 600 Torr. The uptake of CO2 was found to depend on both, the size of the nonframework cation and the temperature at which the isotherms were measured. The cations with lower charge density will have lower extent of electrostatic interaction with the sorbate molecules. Since CO2 has more linear quadrupole moment, it interacts mainly with the extra-framework cations and framework oxygen. The carbon dioxide sorption data satisfactorily represented by Langmuir and also analyzed for the chemical affinity. The Isosteric heat (q(st)) of NaX for the coverage of 20 molecules per unit cell is nearly equal to 26 kJ, mol(-1). The NaX and NaKX comparatively show a flat heat profile with the increasing amount sorbed than those of NaRbX and NaCsX indicating a balance between the strength of energetic heterogeneity of sorbate-sorbent interactions and sorbate-sorbate interactions.

}, keywords = {CO2 sorption, Ionic exchange, Isosteric heat, NaX zeolite, Theoretical models}, issn = {0972-0626}, author = {Joshi, U. D. and Joshi, P. N. and Roh, H. S. and Yoon, W. L. and Shiralkar, V. P.} } @article { ISI:000288784400025, title = {Growth of aligned ZnO nanorods array on ITO for dye sensitized solar cell}, journal = {Current Applied Physics}, volume = {11}, number = {1, 1, SI}, year = {2011}, note = {International Conference on Electronic Materials (IUMRS-ICEM), Seoul, SOUTH KOREA, AUG 22-27, 2010}, month = {JAN}, pages = {S113-S116}, publisher = {Int Union Mat Res Soc (IUMRS)}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Aligned ZnO films of nanorods arrays were grown on Indium doped Tin oxide (ITO) glass substrate for the Dye Sensitized Solar Cells (DSSCs) applications. Two-step approach was employed for the deposition, which offers advantages such as excellent surface adhesion, large area deposition, high reproducibility and yield. Structural characterization using X-ray diffraction (XRD) shows a preferred c-axis (002) oriented growth. Scanning Electron Microscopy (SEM) images reveals uniformly distributed hexagonal ZnO nanorods with average diameter varying from 80 to 250 nm. Average growth rate of the films was estimated using Surface Profilometer which was found to be similar to 1 mu m/h. Optical characterizations were carried out using Photo-spectrometer and Raman spectroscopy. The DSSCs using these ZnO films of nanorods array as photo-electrodes show conversion efficiency ranging from 0.24 to -0.71 \%, the maximum efficiency was obtained for films deposited for time duration 8 h. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Aligned ZnO nanorod growth, Dye sensitized solar cell, Open aqueous solution deposition}, issn = {1567-1739}, doi = {10.1016/j.cap.2010.11.111}, author = {Yengantiwar, Ashish and Sharma, Ramakant and Game, Onkar S. and Banpurkar, Arun G.} } @article { ISI:000294374900020, title = {Heteropolyacid supported on montmorillonite catalyst for dehydration of dilute bio-ethanol}, journal = {Applied Clay Science}, volume = {53}, number = {2, SI}, year = {2011}, month = {AUG}, pages = {263-271}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Vapour phase dehydration of dilute bio-ethanol (EtOH) to ethylene (E) and diethyl ether (DEE) is industrially relevant. Ethylene is an important raw material for many petrochemical products and Diethyl ether (DEE) can be used as an alternative fuel. The efficacy of montmorillonite (K-10) and dodecatungestophosphoric acid (DTPA) supported on montmorillonite (DTPA/K-10), has been evaluated in the current work in the dehydration of dilute bio-ethanol (80\%m/m). The dehydration of ethanol and cracking of diethyl ether were studied independently. 30\% m/m DTPA/K-10 was found to be more active with 74\% ethanol conversion and 92\% ethylene selectivity at 250 degrees C in comparison with other acid catalysts used. The merit of the process lies in its use of dilute bio-ethanol, a new avenue for ethylene production from a non-petroleum feedstock. Kinetic interpretation has been made by studying the important process parameters by using 30\%m/m DTPA/montmorillonite as the catalyst. The mechanism of the dehydration of ethanol reaction suggests that two types of sites are responsible. The dehydration of ethanol and cracking of diethyl ether are second order reactions with weak adsorption of species. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Bio-ethanol, dehydration, Diethyl ether, Ethylene, Heteropolyacid}, issn = {0169-1317}, doi = {10.1016/j.clay.2011.03.006}, author = {Bokade, Vijay V. and Yadav, Ganapati D.} } @article { ISI:000292989000018, title = {Influence of endophytic fungal elicitation on production of inophyllum in suspension cultures of Calophyllum inophyllum L.}, journal = {Plant Cell Tissue and Organ Culture}, volume = {106}, number = {2}, year = {2011}, month = {AUG}, pages = {345-352}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The influence of dried cell powder and culture filtrates of endophytic fungi on production of inophyllum in cell suspension cultures of leaf- and stem-derived callus of Calophyllum inophyllum was investigated. Two fungi, Nigrospora sphaerica and Phoma spp., endophytic to C. inophyllum, were isolated from leaf tissues, and were identified by both 18S rRNA gene amplification and sequencing. Elicitation of suspension cultures of both callus types of C. inophyllum with dried cell powder and culture filtrates of both fungi consistently elicited production of inophyllum A, B, C, and P. In comparison to stem-derived callus, suspension cultures of leaf-derived callus enhanced production of most inophyllum. Of the four inophyllum studied, the highest production of inophyllum A, C, and P was achieved in elicited suspension cultures of leaf-derived callus. Suspension cultures of stem-derived callus enhanced production only of inophyllum B. When suspension cultures of leaf-derived callus were elicited with 40 mg dried cell powder of Phoma spp., a level of 751-fold (6.84 mg/100 g elicited biomass) of inophyllum A was produced, compared to control. Whereas, a level of 414-fold (6.22 mg/100 g elicited biomass) of inophyllum B was produced when suspension cultures of stem-derived callus were elicited with 20 mg dried cell powder of N. sphaerica. When compared to control, a 10\% culture filtrate of N. sphaerica in suspension cultures of leaf-derived callus elicited inophyllum C and P production by 928-fold (7.43 mg/100 g elicited biomass) and 750-fold (1.5 mg/100 g elicited biomass), respectively.

}, keywords = {Biotic elicitation, Calophyllum inophyllum, Endophytic fungi, Inophyllum, Suspension cultures}, issn = {0167-6857}, doi = {10.1007/s11240-011-9928-4}, author = {Pawar, Kiran D. and Yadav, Amit V. and Shouche, Yogesh S. and Thengane, Shubhada Ratnakar} } @article { ISI:000289518000002, title = {Magnetite/CdTe magnetic-fluorescent composite nanosystem for magnetic separation and bio-imaging}, journal = {Nanotechnology}, volume = {22}, number = {22}, year = {2011}, month = {JUN}, pages = {Article No. 225101}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

A new synthesis protocol is described to obtain a CdTe decorated magnetite bifunctional nanosystem via dodecylamine (DDA) as cross linker. High resolution transmission electron microscopy (HRTEM), energy-dispersive x-ray spectroscopy (EDAX), vibrating sample magnetometry (VSM), Fourier transform infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS) and fluorescence microscopy are used to characterize the constitution, size, composition and physical properties of these superparamagnetic-fluorescent nanoparticles. These CdTe decorated magnetite nanoparticles were then functionalized with anti-epidermal growth factor receptor (EGFR) antibody to specifically target cells expressing this receptor. The EGFR is a transmembrane glycoprotein and is expressed on tumor cells from different tissue origins including human leukemic cell line Molt-4 cells. The magnetite-CdTe composite nanosystem is shown to perform excellently for specific selection, magnetic separation and fluorescent detection of EGFR positive Molt-4 cells from a mixed population. Flow cytometry and confocal laser scanning microscopy results show that this composite nanosystem has great potential in antibody functionalized magnetic separation and imaging of cells using cell surface receptor antibody.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/22/22/225101}, author = {Kale, Anup and Kale, Sonia and Yadav, Prasad and Gholap, Haribhau and Pasricha, Renu and Jog, Jyoti Prakash and Lefez, Benoit and Hannoyer, Beatrice and Shastry, Padma and Ogale, Satishchandra B.} } @article { ISI:000285390900010, title = {Main-chain supramolecular block copolymers}, journal = {Chemical Society Reviews}, volume = {40}, number = {1}, year = {2011}, month = {JAN}, pages = {129-137}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

}, issn = {0306-0012}, doi = {10.1039/c0cs00073f}, author = {Yang, Si Kyung and Ambade, Ashootosh V. and Weck, Marcus} } @article { ISI:000297352000112, title = {Preparation and characterization of magnetic nanoparticles embedded in hydrogels for protein purification and metal extraction}, journal = {Journal of Polymer Research}, volume = {18}, number = {6}, year = {2011}, note = {International Conference on Advances in Polymer Technology, Cochin Univ Sci \& Technol, Cochin, INDIA, FEB 26-27, 2010}, month = {NOV}, pages = {2285-2294}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The present work involves the development of hydrogel magnetic nanocomposites for protein purification and heavy metal extraction applications. The magnetic nanoparticles (MNPs) were prepared in situ in poly(acrylamide)-gum acacia (PAM-GA) hydrogels. The formation of magnetic nanoparticles in the hydrogel networks was confirmed by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Scanning electron (SEM) microscopy studies revealed the formation of MNPs throughout the hydrogel networks. The average size of MNPs formed in the hydrogel networks was 3-5 nm as determined by transmission electron microscopy (TEM). The thermal properties of the hydrogel magnetic nanocomposites were evaluated by dynamic scanning calorimetry (DSC) and thermogravimetric (TG) analysis. The magnetic properties of the developed hydrogel magnetic nanocomposites were determined by a vibrating sample magnetometer (VSM). The swelling properties of the hydrogel and the hydrogel magnetic nanocomposites were studied in detail. The hydrogel magnetic nanocomposites are utilized for the removal of toxic metal ions such as Co(II), Ni(II), and Cu(II) and for protein purification. The results confirm that the hydrogel magnetic nanocomposites exhibit superior extraction properties to hydrogels.

}, keywords = {Bioseparation, Hydrogel, magnetic properties, Metal absorption, Nanocomposite}, issn = {1022-9760}, doi = {10.1007/s10965-011-9642-2}, author = {Nagireddy, Narayana Reddy and Yallapu, Murali Mohan and Kokkarachedu, Varaprasad and Sakey, Ravindra and Kanikireddy, Vimala and Alias, Joy Pattayil and Konduru, Mohana Raju} } @article { ISI:000287996100027, title = {Selective catalytic oxidation of geraniol to citral with molecular oxygen in supercritical carbon dioxide}, journal = {Applied Catalysis A-General}, volume = {394}, number = {1-2}, year = {2011}, month = {FEB}, pages = {209-214}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Selective catalytic oxidation of geraniol to citral with molecular oxygen in supercritical carbon dioxide (scCO(2)) has been investigated. The catalyst used was a chromium containing mesoporous molecular sieve catalyst viz. CrMCM-41. Comparison studies were performed with CoMCM-41. PtMCM-41 and PdMCM-41 catalysts. Among the various catalysts studied. CrMCM-41 showed a high conversion of geraniol and an excellent selectivity for citral. In contrast CoMCM-41, PtMCM-41 and PdMCM-41 catalysts exhibited low conversion of geraniol. However all three catalysts compared showed similar citral selectivity to CrMCM-41. The effect of CO(2) pressure and reaction temperature geraniol oxidation was studied with CrMCM-41. Supercritical CO(2) medium was found to enhance the conversion of geraniol and/or yield of citral. It was noticed that the catalyst can be recycled with negligible loss of conversion. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Citral, Geraniol, heterogeneous catalyst, Molecular oxygen, Selective oxidation, Supercritical carbon dioxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2011.01.001}, author = {Dapurkar, Sudhir E. and Kawanami, Hajime and Chatterjee, Maya and Rode, Chandrasekhar V. and Yokoyama, Toshirou and Ikushima, Yutaka} } @article { ISI:000293213600025, title = {Shape preserving chemical transformation of ZnO mesostructures into anatase TiO2 mesostructures for optoelectronic applications}, journal = {Energy \& Environmental Science}, volume = {4}, number = {8}, year = {2011}, month = {AUG}, pages = {2835-2839}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

In this work we report on the synthesis of various ZnO mesostructures (rods, spheres, flakes and flower-like morphologies) by hydrothermal and co-precipitation methods and their remarkable and complete transformation into anatase TiO2 mesostructures with nominally similar shapes using controlled low temperature TiCl4 treatment. Various techniques are used to demonstrate the phase purity and morphology details. Based on the careful examination of the transformation of ZnO rods into TiO2 tubes we suggest a mechanism which embodies initial formation of a thin TiO2 shell on the ZnO surface by ion exchange (Ti4+-Zn2+) followed by Zn diffusion through the shell and its oxidation on the surface. We used these converted TiO2 mesostructures for light harvesting in Dye Sensitized Solar Cells (DSSCs) to enhance the conversion efficiency. It is shown that DSSCs made using a doctor bladed film of TiO2 nanoparticles with an overlayer of TiCl4 treated ZnO flowers yield a solar cell efficiency of 6.9\% which is considerably higher than that with only TiO2 nanoparticle film (5.4\%) of comparable thickness.

}, issn = {1754-5692}, doi = {10.1039/c1ee01515j}, author = {Muduli, Subas and Game, Onkar S. and Dhas, Vivek V. and Yengantiwar, Ashish and Ogale, Satishchandra B.} } @article { ISI:000296659000032, title = {Strong photo-response in a flip-chip nanowire p-Cu2O/n-ZnO junction}, journal = {Nanoscale}, volume = {3}, number = {11}, year = {2011}, month = {OCT}, pages = {4706-4712}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Cu2O nanoneedles are synthesized on a copper substrate by a simple anodization and reducing ambient annealing protocol. ZnO nanorods are grown on ITO coated glass by a low temperature chemical route. The electronic and photo-response properties of the p-Cu2O/n-ZnO flip-chip heterojunction are then studied and analyzed. We show that the I-V characteristic is rectifying and the junction exhibits a good photoresponse (similar to 120\% under 1 V reverse bias) under AM 1.5 (1 Sun) illumination. This nano-heterojunction photo-response is far stronger as compared to that of a pulsed laser deposited thin film p-Cu2O/n-ZnO heterojunction, which can be attributed to higher junction area in the former case.

}, issn = {2040-3364}, doi = {10.1039/c1nr10665a}, author = {Deo, Meenal S. and Mujawar, Sarfraj and Game, Onkar S. and Yengantiwar, Ashish and Banpurkar, Arun G. and Kulkarni, Sneha and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000290075500029, title = {Syntheses and biological evaluation of new triazole-spirochromone conjugates as inhibitors of mycobacterium tuberculosis}, journal = {Tetrahedron Letters}, volume = {52}, number = {18}, year = {2011}, month = {MAY}, pages = {2387-2389}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A series of novel 1,2,3-triazole fused spirochromone conjugates have been synthesized bearing both spirochromone moiety as well as a 1,2,3-triazole moiety. Some of the compounds have exhibited potential activity against Mycobacterium tuberculosis (virulent strain H37Rv). In particular 5e proved to be the most potent derivative exhibiting MIC = 0.78 mu g/mL. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Antitubercular activity, Click chemistry, Mycobacterium tuberculosis, Spirochromones}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2011.02.099}, author = {Muthukrishnan, Murugan and Mujahid, Mohammad and Yogeeswari, P. and Sriram, D.} } @article { ISI:000311056800010, title = {3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor}, journal = {Chemsuschem}, volume = {5}, number = {11}, year = {2012}, month = {OCT}, pages = {2159-2164}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, keywords = {Electrochemistry, Energy storage, graphene, porous materials, Supercapacitors}, issn = {1864-5631}, doi = {10.1002/cssc.201200421}, author = {Yadav, Prasad and Banerjee, Abhik and Unni, Sreekuttan and Jog, Jyoti Prakash and Kurungot, Sreekumar and Ogale, Satishchandra} } @article { ISI:000301445700014, title = {Carbohydrate-based synthesis of the C13-C22 fragment of amphidinolide X}, journal = {European Journal of Organic Chemistry}, number = {9}, year = {2012}, month = {MAR}, pages = {1753-1758}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A facile carbohydrate-based route was developed for the synthesis of the tetrahydrofuran (C13C22) fragment of amphidinolide X. Starting from L-sorbose, the key reactions followed include the stereoselective synthesis of a quaternary center at C1, BartonMcCombie deoxygenation at C2, Mitsunobu inversion at C3, and chain elongation by a Wittig reaction at C5.

}, keywords = {Cytotoxicity, Macrolides, Mitsunobu inversion, Natural products, Wittig reactions}, issn = {1434-193X}, doi = {10.1002/ejoc.201101605}, author = {Gurjar, Mukund K. and Yellol, Gorakh S. and Mohapatra, Debendra K.} } @article { ISI:000312233600006, title = {Carbon nanoscrolls by pyrolysis of a polymer}, journal = {Solid State Communications}, volume = {152}, number = {23}, year = {2012}, month = {DEC}, pages = {2092-2095}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

3D network of carbon nanoscrolls was synthesized starting from pyrolysis of poly(acrylic acid-co-maleic acid) sodium salt. It is a catalyst-free process where pyrolysis of polymer leads to formation of carbon form and sodium carbonate. Upon water soaking of pyrolysis product, the carbon form undergoes self-assembly to form carbon nanoscrolls. The interlayer distance between the walls of carbon nanoscroll was found to be 0.34 nm and the carbon nanoscrolls exhibited a surface area of 188 m(2)/g as measured by the BET method. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon nanoscrolls, Polymer, Pyrolysis, supercapacitor}, issn = {0038-1098}, doi = {10.1016/j.ssc.2012.08.029}, author = {Yadav, Prasad and Warule, Sambhaji and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000299404900016, title = {Dodecatungstophosphoric acid supported on acidic clay catalyst for disproportionation of ethylbenzene in the presence of C-8 aromatics}, journal = {Industrial \& Engineering Chemistry Research}, volume = {51}, number = {3}, year = {2012}, month = {JAN}, pages = {1209-1217}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Vapor-phase disproportionation of ethylbenzene (EB) to diethylbenzene (DEB) in a single step is industrially relevant. Diethylbenzene is an important raw material for the conversion of divinylbenzene monomer. Conventionally, it is prepared from diacetophenone by reduction. It is also prepared by vapor-phase alkylation of ethylbenzene with ethylene/ethanol using zeolitic catalysts. In the current work, the efficacy of dodecatungstophosphoric acid (DTPA) supported on acid-treated clay has been evaluated in the disproportionation of ethylbenzene. A 20\% (w/w) DTPA/K-10 clay catalyst was found to be efficient and robust. An industrial feed having different compositions of ethylbenzene and xylene isomers was used for the experimentation. Hence, they were expected to hinder the movement of reactant molecules on the catalyst surface. It was observed that irrespective of feed composition the concentration of the xylene isomers was intact in the product. There was no other byproduct formation like p-ethylrnethylbenzene. Optimization of process parameters is presented. The effect of varying the concentration of aromatic compounds in the feed on ethylbenzene conversion and product distribution over the plain clay (K-10) and heteropolyacid-loaded clay catalyst have been discussed. The effect of catalyst bed length to inner diameter of reactor (L/D) ratio on the ethylbenzene conversion and selective formation of p-diethylbenzene (p-DEB) are also discussed.

}, issn = {0888-5885}, doi = {10.1021/ie202298e}, author = {Bokade, Vijay V. and Yadav, Ganapati D.} } @article {42448, title = {Efficient synthesis of gamma-keto sulfones by NHC-catalyzed intermolecular stetter reaction}, journal = {Organic Letters}, volume = {14}, year = {2012}, month = {MAY}, pages = {2830{\textendash}2833}, abstract = {

The N-heterocyclic carbene-catalyzed intermolecular Stetter reaction of aldehydes with α,β-unsaturated sulfones allows the atom-economic and selective formation of γ-keto sulfones in good yields. Key to the success of this unique transition-metal-free carbon{\textendash}carbon bond-forming reaction is the right choice of the NHC precursor and base. The reaction tolerates a broad range of different aldehydes.

}, doi = {10.1021/ol301045x}, author = {Bhunia, Anup and Yetra, Santhivardhana Reddy and Bhojgude, Sachin Suresh and Biju, Akkattu T.} } @article { ISI:000305419900012, title = {Gamma-Al2-xMxO3 +/- y (M = Ti4+ through Ga3+): potential pseudo-3D mesoporous materials with tunable acidity and electronic structure}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {27}, year = {2012}, month = {APR}, pages = {13484-13493}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A simple and highly efficient surfactant-free sol-gel process has been developed to obtain nanocrystalline mesoporous gamma-Al2O3 and metal ion incorporated mesoporous gamma-Al2O3 with general formula gamma-Al2-xMxO3 +/- y (where M = Ti4+ through Ga3+). Any one of the first row transition metal (TM) ions along with Ga3+ could be introduced into the gamma-Al2O3 framework in a direct one-pot synthesis process. The generality of the present synthesis recipe for metal ion incorporation in gamma-Al2O3 was demonstrated by preparation of an Al-Ga-M ternary oxide system with the metal ion composition of general formula Al9GaTM (TM = Ti4+ to Zn2+) and their characterization through various physicochemical and spectroscopic techniques. The mesoporous gamma-Al2-xMxO3 +/- y materials showed a BET surface area in the range of 200-400 m(2) g(-1) with a narrow pore size distribution. Wormhole mesoporosity makes the material pseudo-3D (p3D) with a small pore depth of few nm (\<10 nm). Metal ions in gamma-Al2O3 lead to changes in the acidity and electronic environment. XRD, TEM, and Al-27 MAS NMR studies demonstrate that the sol-gel process and the disordered mesoporous structure allow Ga and TM ions to be highly distributed and integrated in the gamma-Al2O3 framework. The efficacy of these materials in catalysis has been successfully evaluated for steam reforming of dimethylether: Ni, Cu and Zn containing Al9GaTM oxides showed high activity and stability. The smaller mesochannel depth (\<10 nm) and pseudo-3D characteristics that arise due to the wormhole-type disordered mesoporous framework of these alumina materials facilitate mass transport through them without any leaching of metal ions out of the lattice and pore blocking during the reaction, which makes them attractive in catalysis. This preparation method is versatile enough to be used for a reproducible synthesis of metal ion incorporated mesoporous gamma-Al2O3 by varying the metal content and their combinations, and it is expected that many other metal ions could be introduced into the lattice framework for a variety of applications by tuning acidity and electronic structure.

}, issn = {0959-9428}, doi = {10.1039/c2jm31184d}, author = {Mathew, Thomas and Sivaranjani, Kumarsrinivasan and Gnanakumar, Edwin S. and Yamada, Yusuke and Kobayashi, Tetsuhiko and Gopinath, Chinnakonda S.} } @article { ISI:000300999700014, title = {Kinetic analysis of 4-isopropylphenol hydrogenation over activated carbon-supported rhodium catalysts in supercritical carbon dioxide solvent}, journal = {Green Chemistry}, volume = {14}, number = {3}, year = {2012}, month = {Jan}, pages = {633-638}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hydrogenation behavior of 4-isopropylphenol to 4-isopropylcyclohexanol over activated carbon-supported rhodium catalysts in supercritical carbon dioxide (scCO(2)) at 313 K was studied in a batch reactor and the results were compared with those in 2-propanol. Higher yields of cis-4-isopropylcyclohexanol were obtained in scCO(2) than in 2-propanol, and the formation of a byproduct, isopropylcyclohexane, was suppressed in scCO(2). The catalyst modification with hydrochloric or phosphoric acid enhanced the yield of cis-4-isopropylcyclohexanol in both scCO(2) and 2-propanol solvents. Kinetic analyses of the reaction profiles revealed higher reaction rates in scCO(2) than those in 2-propanol for the 4-isopropylcyclohexanol formation both by the direct hydrogenation of 4-isopropylphenol and by the consecutive hydrogenation of 4-isopropylcyclohexanone, and also revealed that the addition of hydrochloric acid increased the consecutive hydrogenation rate of 4-isopropylcyclohexanone to cis-4-isopropylcyclohexanol, which reduced the total reaction time needed for the complete hydrogenation of 4-isopropylphenol to 4-isopropylcyclohexanol.

}, issn = {1463-9262}, doi = {10.1039/c1gc16038a}, author = {Hiyoshi, Norihito and Sato, Osamu and Yamaguchi, Aritomo and Rode, Chandrashekhar V. and Shirai, Masayuki} } @article { ISI:000311240100021, title = {Metal [Zn(II), Cd(II)], 1,10-phenanthroline containing coordination polymers constructed on the skeleton of polycarboxylates: synthesis, characterization, microstructural, and CO2 gas adsorption studies}, journal = {Crystal Growth \& Design}, volume = {12}, number = {11}, year = {2012}, month = {NOV}, pages = {5311-5319}, abstract = {

{Four new coordination polymers have been obtained by the reaction of metal [Zn(II), Cd(II)], 1,10-phenanthroline separately with two carboxylic acids, [biphenyl-4,4{\textquoteright}-dicarboxylic acid (4,4{\textquoteright}-H(2)BDA),and 4,4{\textquoteright}-azodibenzoic acid (4,4{\textquoteright}-H(2)ADA)]. The crystal structures of the resulting complexes of type {[Zn(4,4{\textquoteright}-BDA)(Phen)(2)center dot HCON(CH3)(2)}(n) (1), {[Cd(4,4{\textquoteright}-BDA)(Phen)](2)center dot H2O\

}, author = {Yadav, Pramod Kumar and Kumari, Niraj and Pachfule, Pradip and Banerjee, Rahul and Mishra, Lallan} } @article { ISI:000301985300008, title = {Recent advances in transition-metal-free carbon-carbon and carbon-heteroatom bond-forming reactions using arynes}, journal = {Chemical Society Reviews}, volume = {41}, number = {8}, year = {2012}, month = {JAN}, pages = {3140-3152}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This tutorial review is aimed at highlighting recent developments in transition-metal-free carbon-carbon and carbon-heteroatom bond-forming reactions utilizing a versatile class of reactive intermediates, viz., arynes, which hold the potential for numerous applications in organic synthesis. Key to the success of the resurgence of interest in the rich chemistry of arynes is primarily the mild condition for their generation by the fluoride-induced 1,2-elimination of 2-(trimethylsilyl)aryl triflates. Consequently, arynes have been employed for the construction of multisubstituted arenes with structural diversity and complexity. The versatile transition-metal-free applications of arynes include cycloaddition reactions, insertion reactions and multicomponent reactions. In addition, arynes have found applications in natural product synthesis. Herein, we present a concise account of the major developments that occurred in this field during the past eight years.

}, issn = {0306-0012}, doi = {10.1039/c2cs15310f}, author = {Bhunia, Anup and Yetra, Santhivardhana Reddy and Biju, Akkattu T.} } @article { ISI:000309645000077, title = {Surface characterization of Au-ZnO nanowire films}, journal = {Ceramics International}, volume = {38}, number = {8}, year = {2012}, month = {DEC}, pages = {6665-6670}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Au-ZnO nanowire films have been synthesized by annealing Zn foils coated with a thin layer of gold. An X-ray diffraction study found that the synthesized ZnO consists mainly of a hexagonal wurtzite structure along with a small amount of AuZn3 phase. Scanning electron images showed that the ZnO wires extend to several microns in length. X-ray photoelectron spectroscopy studies confirmed the oxidation states of Au and Zn. An asymmetric O ls peak indicates the presence of oxygen in an oxide layer and O H groups on the films surfaces. Photoluminescence (PL) spectra showed different visible peaks for pre-annealed films, while for annealed films an UV peak appeared. In addition, the PL analysis showed that the overall intensity of photoluminescence decreased significantly after the films were annealed. Raman spectroscopy results also indicated that the crystalline quality of the films improved with annealing. This could be attributed to a decrease in oxygen vacancies and/or absorption of O-H groups on the surface of ZnO film. The highly hydrophilic surface with a water contact angle of similar to 155 degrees was obtained after annealing in air. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Au-ZnO, Highly hydrophilic, Nanowires, XPS}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2012.05.054}, author = {Jamali-Sheini, Farid and Yousefi, Ramin and Patil, K. R.} } @article { ISI:000313024300028, title = {Thermally decomposed Cu-Fe-hydrotalcite. a novel highly active catalyst for o-arylation of naphthol and phenols by aryl halides}, journal = {Catalysis Communications}, volume = {29}, year = {2012}, month = {DEC}, pages = {132-136}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel, efficient and environmentally benign method has been reported for the synthesis of diaryl ethers by the o-arylation of napthol or phenols with aryl halides in dimethylformamide (as a solvent) under reflux, using a novel heterogeneous catalyst (having redox properties), obtained from thermal decomposition of Cu-Fe at 600 degrees C in the absence of externally added base. The catalyst comprises Cu(II) and Fe(III) species (oxides and hydroxides), which are uniformly distributed during the catalyst formation. The catalyst can be easily separated from the reaction mixture, simply by filtration and reused several times without a significant loss of its activity. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Aryl halides, C-O cross coupling reaction, Cu-Fe-hydrotalcite, Naphthol, o-Arylation, Phenols}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.09.024}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Yadav, P. N. and Bhargava, Suresh Kumar} } @article { ISI:000305379000012, title = {Transformation of (+/-)-lavandulol and (+/-)-tetrahydrolavandulol by a fungal strain Rhizopus oryzae}, journal = {Bioresource Technology}, volume = {115}, year = {2012}, month = {JUL}, pages = {70-74}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Biotransformation of an irregular monoterpene alcohol, (+/-)-lavandulol [(+/-)-5-methyl-2-(1-methylethenyl)-4-hexen-1-ol] (I) and its tetrahydro derivative, (+/-)-tetrahydrolavandulol [(+/-)-2-isopropyl-5-methylhexan-1-ol] (II) were studied using a soil isolated fungal strain Rhizopus oryzae. Five metabolites, 2-((3,3-dimethyloxiran-2-yl)methyl)-3-methylbut-3-en-1-ol (Ia), 2-methyl-5-(prop-1-en-2-yl)hex-2ene-1,6-diol (Ib), 2-methyl-5-(prop-1-en-2-yl)hexane-1,6-diol (Ic), 2-(3-methylbut-2-enyl)-3-methylenebutane-1,4-diol (Id), 5-methyl-2-(2-methyloxiran-2-yl)hex-4-en-1-01 (Ie) have been isolated from the fermentation medium and characterized with lavandulol as a substrate. When tetrahydrolavandulol used as a substrate, two metabolites 2-isopropyl-5-methylhexane-1,5-diol (IIa) and 2-isopentyl-3-methylbutane-1,3-diol (lib) have been isolated from the fermentation medium. Biotransformation studies with R. oryzae clearly indicate that the organism initiates the transformation either by hydroxylation at allylic methyl groups or epoxidation of double bond. GC and GCMS analyses indicated that both (R)and (S)-enantiomers of I and II have been transformed into corresponding hydroxylated or epoxy derivatives, when racemic I and II were used as substrates. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Biotransformation, Fungus, Lavandulol, Rhizopus oryzae, Tetrahydrolavandulol}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.11.038}, author = {Daramwar, Pankaj P. and Rincy, Raju and Niloferjahan, Siddiqui and Krithika, Ramakrishnan and Gulati, Arvind and Yadav, Amit and Sharma, Rakesh and Thulasiram, Hirekodathakallu V.} } @article { ISI:000310721400015, title = {Vertical arrays of SiNWs-ZnO nanostructures as high performance electron field emitters}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {43}, year = {2012}, month = {NOV}, pages = {22922-22928}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Multicomponent hybrid materials of nanostructured building blocks are essential for the development of complex devices and advanced applications due to their role as either functional or interconnecting elements. This study introduces a simple and cost effective strategy for the synthesis of vertical arrays of silicon nanowires and ZnO nanostructures (nanorod and multipod structures). Formation of vertical nanostructured arrays is confirmed by SEM and HRTEM imaging as well as XRD and Raman measurements. We have investigated field emission properties of the as-synthesized vertical nanostructured arrays. Our results show that these SiNWs-ZnO nanostructures are highly efficient and stable field emitters.

}, issn = {0959-9428}, doi = {10.1039/c2jm34224c}, author = {Devarapalli, Rami Reddy and Shinde, Deodatta R. and Barka-Bouaifel, Fatiha and Yenchalwar, Sandeep G. and Boukherroub, Rabah and More, Mahendra A. and Shalke, Manjusha V.} } @article { ISI:000323842900043, title = {Active sites in modified copper catalysts for selective liquid phase dehydration of aqueous glycerol to acetol}, journal = {RSC Advances}, volume = {3}, number = {37}, year = {2013}, month = {JUL}, pages = {16499-16508}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report here the influence of oxides of various metals viz. Ba, Mg, Zr, Zn, Al, and Cr in modified copper catalysts, on the formation of different copper species and acid sites responsible for dehydration of aqueous glycerol to acetol. These catalysts were prepared by a co-precipitation method, among which the catalysts having higher acid strength and predominant Bronsted acidity (Cu-Mg, Cu-Zr and Cu-Al) gave the highest acetol selectivity (76-92\%), while the catalysts with lower acidity such as Cu-Zn showed very poor (25\%) selectivity to acetol in spite of the highest conversion of 68\%. Nevertheless, catalysts exhibiting higher activity and acetol selectivity also showed the presence of metallic Cu confirmed by XRD and XANES-EXAFS characterization. Based on these results, two different catalytic pathways have been proposed highlighting the role of Lewis and Bronsted acidity along with the metal sites in individual steps of glycerol dehydration reaction.

}, issn = {2046-2069}, doi = {10.1039/c3ra42348d}, author = {Mane, Rasika B. and Yamaguchi, Aritomo and Malawadkar, Atul V. and Shirai, Masayuki and Rode, Chandrashekhar V.} } @article { ISI:000326121700015, title = {Asymmetric N-heterocyclic carbene (NHC)-catalyzed annulation of modified enals with enolizable aldehydes}, journal = {Organic Letters}, volume = {15}, number = {20}, year = {2013}, month = {OCT}, pages = {5202-5205}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

N-Heterocyclic carbene (NHC)-catalyzed highly enantioselective lactonization of modified enals with enolizable aldehydes, proceeding via the alpha,beta-unsaturated acylazolium intermediates, is reported. The reaction results in the asymmetric synthesis of synthetically important 4,5-disubstituted dihydropyranones.

}, issn = {1523-7060}, doi = {10.1021/ol4026155}, author = {Yetra, Santhivardhana Reddy and Kaicharla, Trinadh and Kunte, Sunita S. and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article { ISI:000323590200007, title = {Effect of carbon dioxide pressure on 4-t-butylphenol hydrogenation activity of supported rhodium catalyst}, journal = {Journal of the Japan Petroleum Institute}, volume = {56}, number = {3}, year = {2013}, month = {MAY}, pages = {165-170}, publisher = {JAPAN PETROLEUM INST}, address = {YOYU-KANDA BLDG. 4F, 1-8-4 KANDASUDA-CHO, CHIYODA-KU, TOKYO, 108-0041, JAPAN}, abstract = {

Hydrogenation of 4-t-butylphenol over an activated carbon-supported rhodium catalyst in carbon dioxide solvent was analyzed based on phase observation with a view cell and calculations of the solubility of 4-t-butylphenol using the Peng-Robinson equation of state as a function of carbon dioxide pressure. The reaction experiments showed that the initial reaction rate of 4-t-butylphenol at 313 K under 2 MPa of hydrogen pressure was increased by the addition of carbon dioxide, especially above a total pressure of 11 MPa. Direct visual observation showed that the solubility of 4-t-butylphenol increased with higher carbon dioxide pressure. The calculations based on the Peng-Robinson equation of state also showed that the solubility of 4-t-butylphenol in the 4-t-butylphenol carbon dioxide hydrogen (2 MPa) system at 313 K significantly increased by addition of carbon dioxide above a total pressure of 11 MPa. We concluded that the increase in the hydrogenation rates was caused by the increased concentration of 4-t-butylphenol substrate in the carbon dioxide solvent.

}, keywords = {4-t-Butylphenol hydrogenation, Carbon dioxide solvent, Peng-Robinson equation, Rhodium catalyst, Supercritical fluid}, issn = {1346-8804}, author = {Hiyoshi, Norihito and Sato, Osamu and Yamaguchi, Aritomo and Rode, Chandrashekhar V. and Shirai, Masayuki} } @article { ISI:000319405900025, title = {Engaging isatins in solvent-free, sterically congested passerini reaction}, journal = {Green Chemistry}, volume = {15}, number = {6}, year = {2013}, month = {APR}, pages = {1608-1614}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A facile, atom-economic and environmentally-benign protocol for the synthesis of biologically important oxindole derivatives in high yields has been demonstrated by employing isatins as carbonyl compound surrogates in a Passerini reaction carried out under solvent-free conditions. Moreover, electron-deficient phenols can also be used as the acid component in this reaction. In addition, the synthetic utility of the present methodology was examined by the one-pot synthesis of oxindoles with a free -OH group at the benzylic position.

}, issn = {1463-9262}, doi = {10.1039/c3gc40454d}, author = {Kaicharla, Trinadh and Yetra, Santhivardhana Reddy and Roy, Tony and Biju, Akkattu T.} } @article { ISI:000317352000009, title = {Hydrate phase equilibrium of ternary gas mixtures containing carbon dioxide, hydrogen and propane}, journal = {Journal of Chemical Thermodynamics}, volume = {61}, year = {2013}, month = {JUN}, pages = {58-63}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Hydrate phase equilibrium of the ternary guest mixtures containing carbon dioxide, hydrogen and propane at two different compositions were determined. Addition of mole composition of 2.5\% propane to the fuel gas (CO2 (40\%)/H-2 (60\%)) mixture reduces the hydrate formation conditions by 66\% at the temperature of 278.4 K. A Clausius-Clapeyron plot for the experimental results was plotted and from the slope, the enthalpy of hydrate dissociation was calculated. The enthalpy of dissociation of the mixed hydrate formed from a ternary gas mixture containing mole composition 38.1\% CO2, 59.4\% H-2 and 2.5\% C3H8 was found to be 110 kJ.mol(-1) and hence it was concluded that the mixed hydrate formed structure II (sII) hydrates. Whereas for the ternary gas mixture containing mole composition 80.0\% CO2, 18.8\% H-2, and 1.2\% C3H8, the enthalpy of dissociation of the mixed hydrate was found to be 78 kJ.mol(-1) and hence we believe the mixed hydrate formed structure I (sI) hydrate. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon dioxide capture, Gas hydrates, Global warming, Phase equilibrium, Pre-combustion, Thermodynamics}, issn = {0021-9614}, doi = {10.1016/j.jct.2013.02.003}, author = {Babu, Ponnivalavan and Yang, Ting and Veluswamy, Hari Prakash and Kumar, Rajnish and Linga, Praveen} } @article {43232, title = {Sensing behavior of atomically thin-layered MoS2 transistors}, journal = {ACS Nano}, volume = {7}, year = {2013}, month = {JUN}, pages = {4879-4891}, abstract = {Most of recent research on layered chalcogenides is understandably focused on single atomic layers. However, it is unclear if single-layer units are the most ideal structures for enhanced gas solid interactions. To probe this issue further, we have prepared large-area MoS2 sheets ranging from single to multiple layers on 300 nm SiO2/Si substrates using the micromechanical exfoliation method. The thickness and layering of the sheets were identified by optical microscope, invoking recently reported specific optical color contrast, and further confirmed by AFM and Raman spectroscopy. The MoS2 transistors with different thicknesses were assessed for gas-sensing performances with exposure to NO2, NH3, and humidity in different conditions such as gate bias and light Irradiation. The results show that, compared to the single-layer counterpart, transistors of few MoS2 layers exhibit excellent sensitivity, recovery, and ability to be manipulated by gate bias and green light. Further, our ab initio DFT calculations on single-layer and bilayer MoS2 show that the charge transfer is the reason for the decrease in resistance in the presence of applied field.}, doi = {10.1021/nn400026u}, author = {Late, Dattatray J. and Huang, Yi-Kai and Liu, Bin and Acharya, Jagaran and Shirodkar, Sharmila N. and Luo, Jiajun and Yan, Aiming and Charles, Daniel and Waghmare, Umesh V. and Dravid, Vinayak P. and Rao, C. N. R.} } @article { ISI:000318332300017, title = {Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acids over gold nano-particles supported on MgO (or CaO) and other metal oxides}, journal = {Journal of Catalysis}, volume = {301}, year = {2013}, month = {MAY}, pages = {134-140}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Gold nano-particles-supported alkaline earth metal oxides, particularly MgO or CaO, show high catalytic activity in the Suzuki-Miyaura cross-coupling reaction in the presence of K2CO3 and DMF (as a solvent). The catalytic activity is strongly influenced by the nature or type of metal oxide support (viz, alkaline earth oxide, Group IIIA metal oxide, transition metal oxide, or rare earth oxide actinide oxide). It is also strongly influenced by the nature of aryl halide (aryl iodide, bromide, chloride, or fluoride), amount of K2CO3 in the reaction mixture and catalyst calcination temperature. Influence of reaction parameters viz, temperature and time and different substituents in aryl halides and/or phenylboronic acids on the biphenyl product yield in the reaction over Au/MgO catalyst has also been investigated. The catalyst showed excellent reusability in the reaction. Moreover, it is ligand-free and also has much lower cost than the commonly used homogeneous and heterogeneous Pd catalysts. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Aryl halides, Au/MgO (or CaO) catalyst, Biphenyls, Gold nano-particles, phenylboronic acids, Suzuki-Miyaura coupling reaction}, issn = {0021-9517}, doi = {10.1016/j.jcat.2013.01.012}, author = {Dumbre, Deepa K. and Yadav, P. N. and Bhargava, Suresh Kumar and Choudhary, Vasant R.} } @article { ISI:000314693400052, title = {Synthesis and antitubercular activity of amino alcohol fused spirochromone conjugates}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {23}, number = {5}, year = {2013}, month = {MAR}, pages = {1416-1419}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A series of 21 new amino alcohol fused spirochromone conjugates have been synthesized, characterized with analytical data and evaluated their antimycobacterial activity against Mycobacterium tuberculosis (virulent strain H37Rv) in vitro. Some of the compounds exerted significant inhibition, in particular, compound 4f found to be the most potent derivative exhibiting MIC = 3.13 mu g/mL. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Amino alcohol, Antitubercular activity, Mycobacterium tuberculosis, Spirochromones}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2012.12.073}, author = {Mujahid, Mohammad and Gonnade, Rajesh G. and Yogeeswari, P. and Sriram, D. and Muthukrishnan, Murugan} } @article { ISI:000316024500022, title = {Synthesis of low coercive BaFe12O19 hexaferrite for microwave applications in low-temperature cofired ceramic}, journal = {Journal of Electronic Materials}, volume = {42}, number = {4}, year = {2013}, month = {APR}, pages = {761-768}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Polycrystalline M-type barium hexaferrite (BaFe12O19) samples have been synthesized by solution combustion route at different pH and calcination conditions in order to reduce the coercivity for microwave applications in low-temperature cofired ceramic (LTCC) substrates. Structural, morphological, and magnetic properties of BaFe12O19 were studied by x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Raman spectroscopy, vibrating sample magnetometry (VSM), and Mossbauer spectroscopy. The formation of a single-phase hexagonal structure was confirmed by XRD. The Raman spectra reveal all characteristic peaks of BaFe12O19, illustrating the phase purity and crystal lattice symmetry of the synthesized material. Mossbauer spectra illustrate the existence of Fe3+ cations at all five crystallographic lattice sites. The microstructural features observed by FESEM disclose the growth of nanoregime particles into hexagonal platelet particles after calcination at temperatures from 800A degrees C to 1200A degrees C. The VSM results show a lower coercivity (1350 Oe to 3500 Oe) together with reasonably high saturation magnetization (55 emu/g to 60 emu/g) and a high bulk resistivity (\> 10(9) Omega-cm) at room temperature. The dependence of magnetic and electrical properties on the preparation and processing conditions is also discussed.

}, keywords = {Barium hexaferrite, coercivity, LTCC, Mossbauer spectroscopy, Raman spectroscopy}, issn = {0361-5235}, doi = {10.1007/s11664-012-2398-6}, author = {Rane, Vivek A. and Meena, Sher Singh and Gokhale, Suresh P. and Yusuf, S. M. and Phatak, Girish J. and Date, Sadgopal K.} } @article {46401, title = {Allostery mapping in enterococcus faecalis Bile Salt Hydrolase (BSH)}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C274}, type = {Meeting Abstract}, keywords = {Allostery, Bile salt hydrolase, MD Simulation}, issn = {2053-2733}, author = {Yadav, Yashpal and Ramasamy, Sureshkumar} } @article {43379, title = {Aptamer functionalized multifunctional fluorescent nanotheranostic platform for pancreatic cancer}, journal = {Journal of Nanopharm Drug Delivery}, year = {2014}, month = {DEC}, abstract = {This study explores the potential of aptamer functionalized and fluorescent silver nanoparticles (AgNPs) labeled human serum albumin nanoparticles for drug delivery and bioimaging. Nanotechnology is certainly the most promising research arena in recent years and different fields of biotechnology, medicine and agricultural have been deeply benefited by the enormous advantages of nanotechnology. In recent years, synthesis of nanoparticles via eco-friendly methods has attained a lot of interest and silver nanoparticles are synthesized extensively due to their size tunable properties and vast applicability in different areas. In this study we have explored green synthesized fluorescent silver nanoparticles as a novel bioimaging agent for pancreatic cancer. Capsaicin, a plant phytochemical found in red chilli pepper was encapsulated in aptamer MUC-1 coupled albumin nanoparticles and it was observed that the nanoformulation significantly enhanced the bioavailability and sustained release property of the drug to pancreatic cancer cells in-vitro. Meanwhile AgNPs mediated excellent bioimaging has enhanced the efficacy of our system as drug delivery vehicle.}, doi = {10.1166/jnd.2014.1070}, author = {Nigam, Preeti and Waghmode, Shobha A. and Yeware, Amar M. and Nawale, Laxman U. and Dagde, Priyanka and Dudhane, Amol and Sarkar, Dhiman} } @article { ISI:000343974100018, title = {Electronic structure-sunlight driven water splitting activity correlation of (Zn1-yGay)(O1-zNz)}, journal = {Physical Chemistry Chemical Physics}, volume = {16}, number = {43}, year = {2014}, month = {SEP}, pages = {23654-23662}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

(Zn1-yGay)(O1-zNz) (y \<= 0.10; z \<= 0.15) solid solutions have been investigated for their electronic structure and visible light photocatalytic activity, and a correlation was found between them. (Zn1-yGay)(O1-zNz) with ZnO as the major component have been synthesized by a solution combustion method in 10 minutes using simple raw materials. The local structures of Zn K edge and Ga K edge, and changes in the chemical environment with the incorporation of Ga and N in ZnO were determined by EXAFS study. EXAFS and XRD results suggested the dissolution of GaN in the ZnO lattice. The homogeneity of the solid solution was demonstrated from HRTEM studies. Photoluminescence studies revealed the creation of a new band at the top of the ZnO valence band (VB), and thus the broadening of the VB of (Zn1-yGay)(O1-zNz) or a decrease in the band gap was attributed to the origin of visible light absorption. UV-Vis spectral studies showed light absorption up to 550 nm, which directly supports the VB broadening. Predominant oxygen vacancies and high photocorrosion observed for ZnO were fully suppressed for (Zn1-yGay)(O1-zNz) , indicating the minimization of defects, and thus more sustainability under irradiation conditions. The bare solid solution exhibited reasonable and promising activity for solar hydrogen evolution and photoelectrochemical current generation at 0 V. The present work explained factors such as the preparation method, single phase structure with the stabilization of integral parts, homogeneity in the structure, compensation of oxygen vacancies, and suppression of the density of recombination centres that play a pivotal role in realizing solar energy harvesting.

}, issn = {1463-9076}, doi = {10.1039/c4cp03640a}, author = {Rajaambal, Sivaraman and Yadav, A. K. and Jha, Shambhu Nath and Bhattacharyya, Dibyendu and Gopinath, Chinnakonda S.} } @article { ISI:000341064800048, title = {Enhanced photoluminescence and photoactivity of plasmon sensitized nSiNWs/TiO2 heterostructures}, journal = {Physical Chemistry Chemical Physics}, volume = {16}, number = {33}, year = {2014}, month = {SEP}, pages = {17786-17791}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A light sensitive wide band gap radial heterojunction between TiO2 and nSiNWs sensitized by gold nanoparticles is reported. The surface plasmon of AuNPs influences the optical and photocurrent properties of the heterojunction considerably. Improvement in the band gap emission of TiO2 has been found at the expense of defect radiation. Excitation of AuNPs deposited on nSiNWs/TiO2 by light irradiation shows a wavelength-dependent photocurrent due to the increased photoactivity of the heterojunction.

}, issn = {1463-9076}, doi = {10.1039/c4cp01497a}, author = {Yenchalwar, Sandeep G. and Azhagan, Muniraj Vedi Kuyil and Shelke, Manjusha V.} } @article { ISI:000344978200061, title = {Hollow Co0.85Se nanowire array on carbon fiber paper for high rate pseudocapacitor}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {21}, year = {2014}, month = {NOV}, pages = {18844-18852}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A supercapacitor electrode is fabricated with Co0.85Se hollow nanowires (HNW) array, which is synthesized by wet chemical hydrothermal selenization of initially grown cobalt hydroxyl carbonate nanowires on conductive CFP. The dense self-organized morphology of Co0.85Se HNWs is revealed by scanning/transmission electron microscopy. The as-synthesized Co0.85Se HNWs possess high pseudocapacitive property with high capacitance retention and high durability. The areal capacitance value is seen to vary from 929.5 to 600 mF cm(-2) (60\% retention) as the current density is increased from 1 to 15 mA cm(-2), an increase of a factor of 15. Based on mass loading, this corresponds to a very high gravimetric capacitance of 674 (for 2 mA cm(-2) or 1.48 Ag-1) and 444 Fg(1-) (for 15 mA cm(-2) or 11 A g(-1)) in a full-cell configuration with the Co0.85Se HNWs as cathode and activated carbon as anode (asymmetric configuration) promising results are obtained.

}, keywords = {asymmetric supercapacitor, carbon fiber paper, cobalt selenide, hydrothermal, pseudocapacitor, selenization}, issn = {1944-8244}, doi = {10.1021/am504333z}, author = {Banerjee, Abhik and Bhatnagar, Sumit and Upadhyay, Kush Kumar and Yadav, Prasad and Ogale, Satishchandra} } @article { ISI:000330999600057, title = {IFN-gamma signaling maintains skin pigmentation homeostasis through regulation of melanosome maturation}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {111}, number = {6}, year = {2014}, month = {FEB}, pages = {2301-2306}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Cellular homeostasis is an outcome of complex interacting processes with nonlinear feedbacks that can span distinct spatial and temporal dimensions. Skin tanning is one such dynamic response that maintains genome integrity of epidermal cells. Although pathways underlying hyperpigmentation cascade are recognized, negative feedback regulatory loops that can dampen the activated melanogenesis process are not completely understood. In this study, we delineate a regulatory role of IFN-gamma in skin pigmentation biology. We show that IFN-gamma signaling impedes maturation of the key organelle melanosome by concerted regulation of several pigmentation genes. Withdrawal of IFN-gamma signal spontaneously restores normal cellular programming. This effect in melanocytes is mediated by IFN regulatory factor-1 and is not dependent on the central regulator microphthalmia-associated transcription factor. Chronic IFN-gamma signaling shows a clear hypopigmentation phenotype in both mouse and human skin. Interestingly, IFN-gamma KO mice display a delayed recovery response to restore basal state of epidermal pigmentation after UV-induced tanning. Together, our studies delineate a new spatiotemporal role of the IFN-gamma signaling network in skin pigmentation homeostasis, which could have implications in various cutaneous depigmentary and malignant disorders.

}, keywords = {detanning, gene regulation, interferon, melanin}, issn = {0027-8424}, doi = {10.1073/pnas.1304988111}, author = {Natarajan, Vivek T. and Ganju, Parul and Singh, Archana and Vijayan, Vinaya and Kirty, Kritika and Yadav, Shalini and Puntambekar, Shraddha and Bajaj, Sonali and Dani, Prachi P. and Kar, Hemanta K. and Gadgil, Chetan J. and Natarajan, Krishnamurthy and Rani, Rajni and Gokhale, Rajesh S.} } @conference { ISI:000375936100396, title = {Impact of pressure and temperature on tetra-n-butyl ammonium bromide semi-clathrate process for carbon dioxide capture}, booktitle = {International Conference on Applied Energy, ICAE2014}, series = {Energy Procedia}, volume = {61}, year = {2014}, note = {6th International Conference on Applied Energy (ICAE), Taipei, TAIWAN, MAY 30-JUN 02, 2014}, month = {MAY}, pages = {1780-1783}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

The pre-combustion capture of CO2 in an IGCC power plant employing the hydrate based gas separation (HBGS) process is a novel method currently receiving attention around the world. Tetra-n-butyl ammonium bromide (TBAB) is a promoter that has been shown to improve the efficiency of hydrate formation. In this study, the effect of temperature and pressure on 0.3 mol\% TBAB solution is investigated. The induction time for the experiments conducted at 6.0 MPa and 274.8 K was found to be lower, while nucleation became increasingly random as temperature is increased and pressure is reduced. Total gas uptake and normalized rate of hydrate formation (NR5) is also the highest for the experiments conducted at 6.0 MPa and 274.8 K. However, it was found that the hydrate phase CO2 composition remains relatively constant at both reduced temperatures and pressures. (C) 2014 The Authors. Published by Elsevier Ltd.

}, keywords = {Carbon dioxide capture, Clathrate process, Gas hydrates, Gas separation, Promoters, tetra-n-butyl ammonium bromide}, issn = {1876-6102}, doi = {10.1016/j.egypro.2014.12.211}, author = {Babu, Ponnivalavan and Chin, Weng Inn and Kumar, Rajnish and Linga, Praveen}, editor = {Yan, J. and Lee, D. J. and Chou, S. K. and Desideri, U. and Li, H.} } @article { ISI:000328952500024, title = {Investigations into variations in local cationic environment in layered oxide series InGaO3(ZnO)(m) (m=1-4)}, journal = {Dalton Transactions}, volume = {43}, number = {5}, year = {2014}, month = {NOV}, pages = {2120-2126}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Layered oxides of the series InGaO3(ZnO)(m) (m = 1-4) are interesting due to their structural anisotropy. Here, we report a comprehensive study of their structural details, focusing on the local cationic environment in bulk powder samples by MASNMR and EXAFS, which is hitherto not attempted. It is found that the Ga geometry varies gradually from pure pentacoordinated to a mixture of penta and tetracoordinated with increasing amounts of tetracoordination as we move across the series, contrary to previous reports suggesting exclusively trigonal bipyramidal coordination in all the compounds. A similar observation is also made in the case of Zn and structural evolution involving the dissolution of Ga in a ZnO4 tetrahedral network in a sandwich layer can be discerned, as the insulating ZnO layer size increases.

}, issn = {1477-9226}, doi = {10.1039/c3dt52011k}, author = {Narendranath, Soumya B. and Yadav, Ashok Kumar and Ajithkumar, Thalasseril G. and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Dey, Krishna K. and Raja, Thirumalaiswamy and Devi, R. Nandini} } @article { ISI:000340330500055, title = {Modeling chain-end scission using the fixed pivot technique}, journal = {Chemical Engineering Science}, volume = {116}, year = {2014}, month = {SEP}, pages = {601-610}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Chain-end scission of polymer molecules is the breakage of a fixed-size oligomer or monomer from either end of the macromolecule. A common example is the generation of the glucose monomer from the hydrolysis of starch by glucoamylase. Modeling the dynamics of chain-end scission from first principles by considering each molecular size is challenging due to the large number of differential equations to be solved. The Population Balance Modeling (PBM) is a helpful framework as it could be formulated to lump a few molecular sizes together. However, it is then not obvious how to accurately account for the temporal evolution of the low molecular weight species, which is often of the greatest industrial interest. Here, the Fixed Pivot (FP) technique - one of the methods to solve PBM equations was appropriately modified to address this difficulty. By treating the lower molecular size range as a discrete domain in conjunction with a continuous domain in the upper ranges, the modified FP technique not only retains its original strengths, but also captures accurately the distribution of oligomers including the monomer. The results, which were obtained at a fraction of computational expense, benchmarked very well against the exact solutions for a polymer with a broad size distribution at different Degrees of Polymerization up to similar to O(10(5)). To facilitate wider adoption, guidelines on choice of pivots and observations of the performance of the modified FP technique are also deliberated. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Chain-end scission, Fixed Pivot, Polymers, Population balance}, issn = {0009-2509}, doi = {10.1016/j.ces.2014.05.035}, author = {Ho, Yong Kuen and Doshi, Pankaj and Yeoh, Hak Koon and Ngoh, Gek Cheng} } @article { ISI:000344459400014, title = {N-Heterocyclic carbene-catalyzed enantioselective synthesis of functionalized cyclopentenes via alpha,beta-unsaturated acyl azoliums}, journal = {Chemical Communications}, volume = {50}, number = {93}, year = {2014}, month = {OCT}, pages = {14539-14542}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Highly enantioselective NHC-organocatalyzed synthesis of functionalized cyclopentenes proceeding via alpha,beta-unsaturated acyl azolium intermediates is reported. The organocascade reaction of modified enals with malonic ester derivatives having a gamma-benzoyl group involves the Michael-intramolecular aldol-beta-lactonization-decarboxylation sequence to deliver cyclopentenes in good yields and excellent ee values.

}, issn = {1359-7345}, doi = {10.1039/c4cc07433e}, author = {Mondal, Santigopal and Yetra, Santhivardhana Reddy and Patra, Atanu and Kunte, Sunita S. and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article { ISI:000339540700077, title = {Off-stoichiometric nickel cobaltite nanoparticles: thermal stability, magnetization, and neutron diffraction studies}, journal = {Journal of Physical Chemistry C}, volume = {118}, number = {29}, year = {2014}, month = {JUL}, pages = {16246-16254}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In the present investigation, we report a detailed examination of the effect of off-stoichiometry introduced in NiCo2O4 by adding excess cobalt. Thus, we compare and analyze the structural and magnetic properties of the Ni075Co2.25O4 and NiCo2O4 cubic systems. A low temperature combustion method was utilized to synthesize stoichiometric (NiCo2O4) and off-stoichiometric (Ni0.75Co2.25O4) nanoparticles on a large scale. The X-ray diffraction pattern for the sample annealed at high temperature (773 K) shows the presence of a much less intense NiO phase (similar to 2-5\%) in Ni0.75Co2.25O4 as compared to that in the case of NiCo2O4 sample (similar to 15-20\%). The Ni 2p and Co 2p XPS spectra reveal the coexistence of Ni2+, Ni3+, Co2+, and Co3+ species on the surface of both the NiCo2O4 and Ni0.75Co2.23O4 samples in differing proportions. In addition to the basic magnetic characterizations using PPMS, these were also analyzed by neutron diffraction. The off-stoichiometric Ni0.75Co2.25O4 sample shows an interesting magnetic phase conversion from frustrated dipolar system to an enhanced magnetic ordering upon annealing. Local moments on the lattice sites of NiCo2O4 and Ni0.75Co2.25O4 samples are further compared by neutron diffraction confirming stronger ordered moments and enhanced structural and thermal stability for the Ni0.75Co2.25O4 sample.

}, issn = {1932-7447}, doi = {10.1021/jp504538y}, author = {Verma, Seema and Kumar, Amit and Pravarthana, D. and Deshpande, Aparna and Ogale, Satishchandra B. and Yusuf, S. M.} } @article { ISI:000344132400051, title = {Oligomer-salt derived 3D, heavily nitrogen doped, porous carbon for Li-ion hybrid electrochemical capacitors application}, journal = {Carbon}, volume = {80}, year = {2014}, month = {DEC}, pages = {462-471}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

3D high surface area porous carbon is seen to form via self assembly of porous graphene sheets by direct pyrolysis of an oligomer salt tailored for the realization of molecular level activation. The oligomer salt was derived from 4-amino benzoic acid as the monomer by a facile free radical polymerization process. Incorporation of the functional groups (-COONa) eliminate the need for any external activating agents (KOH, ZnCl2, etc.) and also render high degree of sub-nanoscale homogeneity. This oligomer derived carbon (ODC) exhibits efficient performance in non-aqueous charge storage application namely Li-ion hybrid electrochemical capacitor (Li-HEC) owing to its high surface area, 3D interconnectivity and an appropriate pore size distribution. The Li-HEC fabricated with ODC based electrodes delivered a maximum energy density of similar to 63 Wh kg(-1) with spinel L4Ti5O12 as the anode. (C) 2014 Elsevier Ltd. All rights reserved.

}, issn = {0008-6223}, doi = {10.1016/j.carbon.2014.08.086}, author = {Gokhale, Rohan and Aravindan, Vanchiappan and Yadav, Prasad and Jain, Srashti and Phase, Deodatta and Madhavi, Srinivasan and Ogale, Satishchandra} } @article { ISI:000340446300061, title = {Photocatalytic H-2 evolution from water-methanol system by anisotropic InFeO3(ZnO)(m) oxides without cocatalyst in visible light}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {15}, year = {2014}, month = {AUG}, pages = {12321-12327}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

InFeO3(ZnO)(m), series of oxides are found to give unprecedented H-2 evolution from water-methanol mixtures without using any cocatalysts. This family of compounds has an anisotropically layered structure in which Zn/FeOn polyhedra are sandwiched between InO6 octahedral layers. Local structure characterization by X-ray absorption spectroscopy reveals that Zn coordination changes from pentacoordinated to tetrahedral geometry across the series, whereas Fe geometry remains trigonal bipyramidal in all the compounds. This peculiar structure is conducive for a spatial separation of photogenerated charges reducing recombination losses. Band gap energies calculated from absorption spectra indicate potential visible light activity, and this may be due to the orbital mixing of Fe 3d and O 2p as revealed by pre-edge features of X-ray absorption spectra. Band positions are also advantageously placed for a visible light H-2 generation and is indeed found to be the case in methanol-assisted water splitting with standardized hydrogen evolution of similar to 19.5 mmol g(-1) h(-1) for all the catalysts.

}, keywords = {anisotropic structure, H-2 evolution, InFeO3(ZnO)(m), layered oxide, photocatalytic water splitting}, issn = {1944-8244}, doi = {10.1021/am501976z}, author = {Narendranath, Soumya B. and Yadav, Ashok Kumar and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Devi, R. Nandini} } @article { ISI:000337617500028, title = {Plasmon-enhanced photocurrent generation from click-chemically modified graphene}, journal = {Chemistry-A European Journal}, volume = {20}, number = {24}, year = {2014}, month = {JUN}, pages = {7402-7409}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The visible-light response of Au nanoparticles (AuNPs) assembled on rGO through different molecular bridges was investigated by transient photocurrent generation. We prepared rGO with two self-assembled monolayers (SAMs), one linear and the other with aromatic triazoles through a click cycloaddition reaction. A fivefold photocurrent enhancement was observed for triazole linkers over the aminopropyltrimethoxysilane (APTMS) linker. Cyclic voltammetry (CV) and impedance measurements also suggest fast electron transfer on account of the low resistance offered by the click-modified rGO surface whereby introduction of triazoles offers the efficient bridge between the donor AuNPs and acceptor rGO.

}, keywords = {Gold, graphene, Nanoparticles, photophysics, surface plasmon resonance}, issn = {0947-6539}, doi = {10.1002/chem.201400403}, author = {Yenchalwar, Sandeep G. and Devarapalli, Rami Reddy and Deshmukh, Ashvini B. and Shelke, Manjusha V.} } @article { ISI:000340350900018, title = {Production of octyl levulinate biolubricant over modified H-ZSM-5: Optimization by response surface methodology}, journal = {Journal of Energy Chemistry}, volume = {23}, number = {4}, year = {2014}, month = {JUL}, pages = {535-541}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The present study highlighted the use of modified H-ZSM-5 (Meso-HZ-5) as heterogeneous catalyst for the synthesis of octyl levulinate biolubricant by catalytic esterification of biomass derived renewable levulinic acid (LA) with n-octanol. The process variables such as catalyst loading (X-1), n-octanol to LA molar ratio (X-2) and reaction temperature (X-3) were optimized through response surface methodology (RSM), using Box-Behnken model. Analysis of variance was performed to determine the adequacy and significance of the quadratic model. The yield of octyl levulinate was obtained to be 99\% at optimum process parameters. The developed quadratic model was found to be adequate and statistically accurate with correlation value (R-2) of 0.9971 to predict the yield of octyl levulinate biolubricant. The study was also extended on the validation of theoretical and experimental data, including catalyst reusability.

}, keywords = {biolubricant, Esterification, H-ZSM-5, levulinic acid, octyl levulinate, Response surface methodology}, issn = {2095-4956}, doi = {10.1016/S2095-4956(14)60182-0}, author = {Nandiwale, Kakasaheb Y. and Yadava, Sunil K. and Bokade, Vijay V.} } @article { ISI:000341339300024, title = {Second generation, arginine-rich (R-X {\textquoteleft}-R)(4)-type cell-penetrating alpha-omega-alpha-peptides with constrained, chiral omega-amino acids (X {\textquoteleft}) for enhanced cargo delivery into cells}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {24}, number = {17}, year = {2014}, month = {SEP}, pages = {4198-4202}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The syntheses of novel N-aminoalkyl proline-derived spacers (X{\textquoteright}) in polycationic (R-X{\textquoteright}-R)-motif cell-penetrating alpha-omega-alpha-peptides are described as improved molecular transporters and their structural features studied by CD. FACS analysis shows enhanced cellular uptake and confocal microscopy indicates predominantly cytoplasmic localization. The oligomers are efficient at transporting pDNA into cells. The chirality together with the hydrophobicity and flexibility derived from the spacer chain are found to have marked influence on the cell-penetrating and cargo delivery properties of the cell-penetrating peptides (CPPs). The peptides containing N-(3-aminopropyl)-D-proline spacers are found to be the best at cell penetration and cargo delivery in the present study. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {(R-X-R)-motif, alpha-omega-alpha-Peptide, Cell-penetrating peptide, Constrained chiral amino acid, Peptidomimetics}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2014.07.040}, author = {Patil, Kiran M. and Naik, Rangeetha J. and Vij, Manika and Yadav, Amit K. and Kumar, Vaijayanti A. and Ganguli, Munia and Fernandes, Moneesha} } @article {42442, title = {Synthesis of functionalized coumarins and quinolinones by NHC-catalyzed annulation of modified enals with heterocyclic C-H acids}, journal = {Journal of Organic Chemistry}, volume = {79}, year = {2014}, month = {APR}, pages = {4245{\textendash}4251}, abstract = {

N-Heterocyclic carbene (NHC) catalyzed lactonization and lactamization of 2-bromoenals with heterocyclic C{\textendash}H acids proceeding via the α,β-unsaturated acyl azolium intermediates is reported. The reaction furnished coumarin- or quinolinone-fused lactone/lactam derivatives. In addition, results of the enantioselective version of this reaction using chiral NHC are presented.

}, doi = {10.1021/jo500693h}, author = {Yetra, Santhivardhana Reddy and Roy, Tony and Bhunia, Anup and Porwal, Digvijay and Biju, Akkattu T.} } @article { ISI:000333776000055, title = {Thermodynamic and kinetic verification of tetra-n-butyl ammonium nitrate (TBANO(3)) as a promoter for the clathrate process applicable to precombustion carbon dioxide capture}, journal = {Environmental Science \& Technology}, volume = {48}, number = {6}, year = {2014}, month = {MAR}, pages = {3550-3558}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In this study, tetra-n-butyl ammonium nitrate (TBANO(3)) is evaluated as a promoter for precombustion capture of CO2 via hydrate formation. New hydrate phase equilibrium data for fuel gas (CO2/H-2) mixture in presence of TBANO(3) of various concentrations of 0.5, 1.0, 2.0, 3.0, and 3.7 mol \% was determined and presented. Heat of hydrate dissociation was calculated using Clausius-Clapeyron equation and as the concentration of TBANO(3) increases, the heat of hydrate dissociation also increases. Kinetic performance of TBANO(3) as a promoter at different concentrations was evaluated at 6.0 MPa and 274.2 K. Based on induction time, gas uptake, separation factor, hydrate phase CO2 composition, and rate of hydrate growth, 1.0 mol \% TBANO(3) solution was found to be the optimum concentration at the experimental conditions of 6.0 MPa and 274.2 K for gas hydrate formation. A 93.0 mol \% CO2 rich stream can be produced with a gas uptake of 0.0132 mol of gas/mol of water after one stage of hydrate formation in the presence of 1.0 mol \% TBANO(3) solution. Solubility measurements and microscopic images of kinetic measurements provide further insights to understand the reason for 1.0 mol \% TBANO(3) to be the optimum concentration.

}, issn = {0013-936X}, doi = {10.1021/es4044819}, author = {Babu, Ponnivalavan and Yao, Minghuang and Datta, Stuti and Kumar, Rajnish and Linga, Praveen} } @article { ISI:000362611300009, title = {Atomic-resolution structures of the APC/C subunits Apc4 and the Apc5 N-terminal domain}, journal = {Journal of Molecular Biology}, volume = {427}, number = {20}, year = {2015}, month = {OCT}, pages = {3300-3315}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Many essential biological processes are mediated by complex molecular machines comprising multiple subunits. Knowledge on the architecture of individual subunits and their positions within the overall multimeric complex is key to understanding the molecular mechanisms of macromolecular assemblies. The anaphase-promoting complex/cyclosome (APC/C) is a large multisubunit complex that regulates cell cycle progression by ubiquitinating cell cycle proteins for proteolysis by the proteasome. The holo-complex is composed of 15 different proteins that assemble to generate a complex of 20 subunits. Here, we describe the crystal structures of Apc4 and the N-terminal domain of Apc5 (Apc5(N)). Apc4 comprises a WD40 domain split by a long alpha-helical domain, whereas Apc5(N) has an alpha-helical fold. In a separate study, we had fitted these atomic models to a 3.6-angstrom-resolution cryo-electron microscopy map of the APC/C. We describe how, in the context of the APC/C, regions of Apc4 disordered in the crystal assume order through contacts to Apc5, whereas Apc5(N) shows small conformational changes relative to its crystal structure. We discuss the complementary approaches of high-resolution electron microscopy and protein crystallography to the structure determination of subunits of multimeric complexes. (c) 2015 MRC Laboratory of Molecular Biology. Published by Elsevier Ltd.

}, keywords = {anaphase-promoting complex, cell cycle, multisubunit structure, protein crystallography, ubiquitin}, issn = {0022-2836}, doi = {10.1016/j.jmb.2015.08.023}, author = {Cronin, Nora B. and Yang, Jing and Zhang, Ziguo and Kulkarni, Kiran and Chang, Leifu and Yamano, Hiroyuki and Barford, David} } @article {42432, title = {Diastereoselective synthesis of cyclopentanone-fused spirooxindoles by N-heterocyclic carbene-catalyzed homoenolate annulation with isatilidenes}, journal = {Organic Chemistry Frontiers}, volume = {2}, year = {2015}, month = {SEP}, pages = {1584-1588}, abstract = {

N-Heterocyclic carbene (NHC)-catalyzed formal [3 + 2] annulation of α,β-unsaturated aldehydes with N-substituted isatilidenes resulting in the diastereoselective synthesis of cyclopentanone-fused spirooxindoles is demonstrated. Mechanistically, the reaction proceeds via the generation of homoenolate equivalent intermediates from NHC and enals, which on interception with isatilidenes afford spiroheterocyclic compounds bearing an all-carbon quaternary spiro-center in moderate to good yields and generally with high diastereoselectivity. Moreover, the functionalization of the spirooxindoles as well as the initial studies on the enantioselective version of this reaction are presented.

}, doi = {10.1039/C5QO00242G}, author = {Patra, Atanu and Bhunia, Anup and Yetra, Santhivardhana Reddy and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article { ISI:000357468200016, title = {Discovery of rimonabant and its potential analogues as anti-TB drug candidates}, journal = {Medicinal Chemistry Research}, volume = {24}, number = {7}, year = {2015}, month = {JUL}, pages = {2960-2971}, publisher = {SPRINGER BIRKHAUSER}, address = {233 SPRING STREET, 6TH FLOOR, NEW YORK, NY 10013 USA}, abstract = {

Rimonabant and its analogues have been synthesized in moderate to good yields using a simple synthetic route. All the newly synthesized compounds were subjected to in vitro screening against M. tuberculosis and M. smegmatis. The most potent analogue JMG-14 exhibits MIC value of 3.13 compared to 3.25 and 50 A mu g/ml for ethambutol and pyrazinamide, respectively. The molecular docking reveals that pyrazole ring, number and position of halogen atoms play a crucial role in deciding interactions with MTCYP-121. These findings open up a new avenue in the search of potent anti-TB drugs with rimonabant and its novel analogue JMG-14 as lead molecules.

}, keywords = {Diaryl pyrazoles, H37Rv, MTCYP-121, Mycobacterium tuberculosis, Rimonabant, tuberculosis}, issn = {1054-2523}, doi = {10.1007/s00044-015-1346-4}, author = {Gajbhiye, J. M. and More, Namita A. and Patil, Manoj D. and Ummanni, R. and Kotapalli, S. S. and Yogeeswari, P. and Sriram, D. and Masand, Vijay H.} } @article { ISI:000351970000002, title = {Dripping dynamics of newtonian liquids from a tilted nozzle}, journal = {European Journal of Mechanics B-Fluids}, volume = {51}, year = {2015}, month = {MAY-JUN}, pages = {8-15}, publisher = {GAUTHIER-VILLARS/EDITIONS ELSEVIER}, address = {23 RUE LINOIS, 75015 PARIS, FRANCE}, abstract = {

The dripping dynamics of Newtonian liquids emanating from an inclined nozzle is studied. The fluid viscosity mu flow rate Q, nozzle radius R, and inclination angle theta have been varied independently. The drop breakup times and the different modes of dripping have been identified using high speed imaging. A phase diagram showing the transition between the dripping modes for different theta is constructed in the (We, Ka) space, where We (Weber number) measures the relative importance of inertia to surface tension force and Ka (Kapitza number) measures the relative importance of viscous to surface tension forces. At low values of We and Ka, the system shows a transition from period-1 to limit cycle before chaos. The limit cycle region narrows down with increase in inclination. Further increase in the values of We and Ka gives a direct transition from period-1 to chaos. The new experiments reveal that in the period-1 region, increasing the nozzle inclination angle theta results in lowering of the drop breakup time t(b), suggesting that the surface tension forces cannot hold the drops longer despite the weakened effective gravitational pull. This counter-intuitive finding is further corroborated by pendant drop experiments and computations. More curiously, throughout the period-1 regime, the drop volume is independent of the flow rate. This resulted in a relatively simple correlation for the dimensionless drop volume V = 1.3G(-1)Ka(0.02)(cos theta)(0.37) accurate to within 10\% over wide ranges of the independent variables. (C) 2014 Elsevier Masson SAS. All rights reserved.

}, keywords = {Asymmetric dripping, Breakup time, Drop volume, Inclined nozzle, Phase diagram}, issn = {0997-7546}, doi = {10.1016/j.euromechflu.2014.12.004}, author = {Taur, Amaraja and Doshi, Pankaj and Yeoh, Hak Koon} } @article {45880, title = {Enantioselective synthesis of functionalized pyrazoles by NHC-catalyzed reaction of pyrazolones with alpha,beta-unsaturated aldehydes}, journal = {Organic Letters}, volume = {17}, year = {2015}, month = {MAR}, pages = {1417-1420}, type = {Article}, abstract = {

The N-heterocyclic carbene (NHC)-organocatalyzed enantioselective annulation reaction of pyrazolones with alpha,beta-unsaturated aldehydes proceeding via the chiral alpha,beta-unsaturated acyl azolium intermediates under oxidative conditions is presented. The reaction afforded dihydropyranone-fused pyrazoles in moderate to good yields and good er values under operationally simple and base-free conditions.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.5b00293}, author = {Yetra, Santhivardhana Reddy and Mondal, Santigopal and Suresh, Eringathodi and Biju, Akkattu T.} } @article { ISI:000352246100007, title = {Exploiting powder x-ray diffraction to establish the solvent-assisted solid-state supramolecular assembly of pillar[5]quinone}, journal = {Crystal Growth \& Design}, volume = {15}, number = {4}, year = {2015}, month = {APR}, pages = {1583-1587}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report the solvent-mediated supramolecular assembly of pillar[5]quinone (P[5]Q), a symmetric cyclamer containing five benzoquinone moieties bridged by five alternating methylene units. The supramolecular assembly of P[5]Q is shown to be facilitated by 1,1,2,2-tetrachloroethane (TCE) as solvent, producing a microcrystalline solvate material P[5]Q(.)2TCE with a fluffy texture. Optical and electron microscopy reveal that this material has a rod-shaped morphology, extending to several micrometers in length. Due to the microcrystalline nature of the material, structure determination was carried out directly from powder X-ray diffraction data, augmented by high-resolution solid-state C-13 NMR. The two crystallographically distinct TCE molecules occupy different types of void in the structure and have different dynamic properties. Crystallization of P[5]Q was attempted from a large number of different solvents, but only TCE was found to facilitate the formation of a crystalline phase. Indeed, features of the crystal structure suggest that the TCE component plays an important role in promoting the columnar assembly of P[5]Q molecules.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.5b00277}, author = {Shivakumar, Kilingaru I. and Yan, Yuncheng and Hughes, Colan E. and Apperley, David C. and Harris, Kenneth D. M. and Sanjayan, Gangadhar J.} } @article { ISI:000351969900008, title = {First naphthosemiquinone complex of K+ with vitamin K3 analog: experiment and density functional theory}, journal = {Journal of Molecular Structure}, volume = {1088}, year = {2015}, month = {MAY}, pages = {56-63}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Synthesis and characterization of potassium complex of 2-hydroxy-3-methyl-1,4-naphthoquinone (phthiocol), the vitamin K3 analog, has been carried out using FT-IR, UV-Vis, H-1 and C-13 NMR, EPR, cyclic voltammetry and single crystal X-ray diffraction experiments combined with the density functional theory. It has been observed that naphthosemiquinone binds to two K+ ions extending the polymeric chain through bridging oxygens O(2) and O(3). The crystal network possesses hydrogen bonding interactions from coordinated water molecules showing water channels along the c-axis. C-13 NMR spectra revealed that the complexation of phthiocol with potassium ion engenders deshielding of C(2) signals, which appear at delta = similar to 14.6 ppm whereas those of C(3) exhibit up-field signals near delta similar to 6.9 ppm. These inferences are supported by the M06-2x based density functional theory. Electrochemical experiments further suggest that reduction of naphthosemiquinone results in only a cathodic peak from catechol. A triplet state arising from interactions between neighboring phthiocol anion lead to a half field signal at g = 4.1 in the polycrystalline X-band EPR spectra at 133 K. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {C-13 NMR, DFT, hydrogen bonding, Naphthosemiquinone, Phthiocol, Vitamin K3}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2015.01.053}, author = {Kathawate, Laxmi and Gejji, Shridhar P. and Yeole, Sachin D. and Verma, Prakash L. and Puranik, Vedavati G. and Salunke-Gawali, Sunita} } @article { ISI:000360313500013, title = {Interlinked population balance and cybernetic models for the simultaneous saccharification and fermentation of natural polymers}, journal = {Biotechnology and Bioengineering}, volume = {112}, number = {10}, year = {2015}, month = {OCT}, pages = {2084-2105}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Simultaneous Saccharification and Fermentation (SSF) is a process where microbes have to first excrete extracellular enzymes to break polymeric substrates such as starch or cellulose into edible nutrients, followed by in situ conversion of those nutrients into more valuable metabolites via fermentation. As such, SSF is very attractive as a one-pot synthesis method of biological products. However, due to the co-existence of multiple biochemical steps, modeling SSF faces two major challenges. The first is to capture the successive chain-end and/or random scission of the polymeric substrates over time, which determines the rate of generation of various fermentable substrates. The second is to incorporate the response of microbes, including their preferential substrate utilization, to such a complex broth. Each of the above-mentioned challenges has manifested itself in many related areas, and has been competently but separately attacked with two diametrically different tools, i.e., the Population Balance Modeling (PBM) and the Cybernetic Modeling (CM), respectively. To date, they have yet to be applied in unison on SSF resulting in a general inadequacy or haphazard approaches to examine the dynamics and interactions of depolymerization and fermentation. To overcome this unsatisfactory state of affairs, here, the general linkage between PBM and CM is established to model SSF. A notable feature is the flexible linkage, which allows the individual PBM and CM models to be independently modified to the desired levels of detail. A more general treatment of the secretion of extracellular enzyme is also proposed in the CM model. Through a case study on the growth of a recombinant Saccharomyces cerevisiae capable of excreting a chain-end scission enzyme (glucoamylase) on starch, the interlinked model calibrated using data from the literature (Nakamura et al., Biotechnol. Bioeng. 53:21-25, 1997), captured features not attainable by existing approaches. In particular, the effect of various enzymatic actions on the temporal evolution of the polymer distribution and how the microbes respond to the diverse polymeric environment can be studied through this framework. Biotechnol. Bioeng. 2015;112: 2084-2105. (c) 2015 Wiley Periodicals, Inc.

}, keywords = {cybernetic modeling, population balance modeling, simultaneous saccharification and fermentation}, issn = {0006-3592}, doi = {10.1002/bit.25616}, author = {Ho, Yong Kuen and Doshi, Pankaj and Yeoh, Hak Koon and Ngoh, Gek Cheng} } @article { ISI:000367232900032, title = {New insights into in vitro amyloidogenic properties of human serum albumin suggest considerations for therapeutic precautions}, journal = {Febs Letters}, volume = {589}, number = {24, B}, year = {2015}, month = {DEC}, pages = {4033-4038}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Amyloid aggregates display striking features of detergent stability and self-seeding. Human serum albumin (HSA), a preferred drug-carrier molecule, can also aggregate in vitro. So far, key amyloid properties of stability against ionic detergents and self-seeding, are unclear for HSA aggregates. Precautions against amyloid contamination would be required if HSA aggregates were self-seeding. Here, we show that HSA aggregates display detergent sarkosyl stability and have self-seeding potential. HSA dimer is preferable for clinical applications due to its longer retention in circulation and lesser oedema owing to its larger molecular size. Here, HSA was homodimerized via free cysteine-34, without any potentially immunogenic cross-linkers that are usually pre-requisite for homodimerization. Alike the monomer, HSA dimers also aggregated as amyloid, necessitating precautions while using for therapeutics. (C) 2015 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

}, keywords = {Drug carrier, HSA amyloid, Plasma expander, Sarkosyl, Self-seeding}, issn = {0014-5793}, doi = {10.1016/j.febslet.2015.11.004}, author = {Sharma, Neetu and Sivalingam, Vishwanath and Maurya, Sonalika and Prasad, Archana and Khandelwal, Puneet and Yadav, Subhash Chandra and Patel, Basant K.} } @article {45937, title = {Nioella nitratireducens gen. nov., sp nov., a novel member of the family Rhodobacteraceae isolated from Azorean Island}, journal = {Antonie Van Leeuwenhoek International Journal of General and Molecular Microbiology}, volume = {107}, year = {2015}, month = {FEB}, pages = {589-595}, type = {Article}, abstract = {

A novel Gram-negative, non-spore forming, rod-shaped aerobic bacterium, designated SSW136(T), was isolated from a surface seawater sample collected at Espalamaca (in Faial Island), Azores. Growth was found to occur from 10 to 37 A degrees C, pH 6.0-8.0, and with 2-11 \% of NaCl. 16S rRNA gene sequence indicated that the strain SSW136(T) belongs to the family Rhodobacteraceae. Strain SSW136(T) exhibited 96.3, 95.9, 95.7 and 95.5 sequence similarity to the type strains Oceanicola litoreus M-M22(T), Roseovarius aestuarii SMK-122(T), Marivita geojedonensis DPG-138(T), and Pseudoruegeria aquimaris SW-255(T) respectively. Neighbour-joining and maximum-parsimony phylogenetic trees based on 16S rRNA gene sequences revealed that strain SSW136(T) was affiliated to the family Rhodobacteraceae and formed a separate branch. The G+C content was 63.5 mol\%. The major respiratory quinone was found to be Q-10. The polar lipids of strain SSW136(T) consisted of phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, two unidentified aminolipids and three unidentified phospholipids. The major fatty acids were C-18:1 omega 7c (46.5 \%), Cyclo-C-19:0 omega 8c (16.0 \%) and C-16:0 (12.8 \%). On the basis of the morphological, genotypic, chemotaxonomic characteristics and low DNA-DNA relatedness, strain SSW136(T) is proposed to represent a novel genus and novel species, Nioella nitratireducens gen. nov., sp. nov., in the family Rhodobacteraceae. The type strain is SSW136(T) (=KCTC 32417(T) = NCIM 5499(T)).

}, keywords = {Espalamaca, Nioella nitratireducens, Novel genus and species, Polyphasic taxonomy, Seawater}, issn = {0003-6072}, doi = {10.1007/s10482-014-0355-5}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Yoon, Jung-Hoon and Dastager, Syed Gulam and Liu, Qing and Khieu, Thi-Nhan and Son, Chu Ky and Li, Wen-Jun and Colaco, Ana} } @article {42436, title = {Recent advances in the N-heterocyclic carbene (NHC)-organocatalyzed stetter reaction and related chemistry}, journal = {Synthesis-Stuttgart}, volume = {47}, year = {2015}, month = {APR}, pages = {1357-1378}, abstract = {

Recent developments in the N-heterocyclic carbene (NHC)-catalyzed umpolung of aldehydes followed by their interception with activated carbon{\textendash}carbon double bonds, namely the Stetter reaction, are presented. Advances in the inter- and intramolecular versions of this reaction, enantioselective transformations as well as the use of unactivated olefins in this type of reaction are discussed.

}, doi = {10.1055/s-0034-1378692}, author = {Yetra, Santhivardhana Reddy and Patra, Atanu and Biju, Akkattu T.} } @article { ISI:000359951700161, title = {RXR-carbamate - a novel molecular transporter for skin}, journal = {Molecular Therapy}, volume = {23}, number = {1}, year = {2015}, note = {18th Annual Meeting of the American-Society-of-Gene-and-Cell-Therapy (ASGCT), New Orleans, LA, MAY 13-16, 2015}, month = {MAY}, pages = {S64-S64}, publisher = {Amer Soc Gene \& Cell Therapy}, address = {75 VARICK ST, 9TH FLR, NEW YORK, NY 10013-1917 USA}, issn = {1525-0016}, author = {Natarajan, Poornemaa and Patil, Kiran M. and Vij, Manika and Yadav, Amit K. and Kumar, Vaijayanti A. and Ganguli, Munia and Fernandes, Moneesha} } @article { ISI:000357808500016, title = {Single-layer graphene-assembled 3D porous carbon composites with PVA and Fe3O4 nano-fillers: an interface-mediated superior dielectric and EMI shielding performance}, journal = {Physical Chemistry Chemical Physics}, volume = {17}, number = {28}, year = {2015}, month = {JUN}, pages = {18353-18363}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

In this study, a novel composite of Fe3O4 nanofiller-decorated single-layer graphene-assembled porous carbon (SLGAPC) with polyvinyl alcohol (PVA) having flexibility and a density of 0.75 g cm(-3) is explored for its dielectric and electromagnetic interference (EMI) response properties. The composite is prepared by the solution casting method and its constituents are optimized as 15 wt\% SLGAPC and 20 wt\% Fe3O4 through a novel solvent relaxation nuclear magnetic resonance experiment. The PVA-SLGAPC-Fe3O4 composite shows high dielectric permittivity in the range of 1 Hz-10 MHz, enhanced by a factor of 4 as compared to that of the PVA-SLGAPC composite, with a reduced loss by a factor of 2. The temperature dependent dielectric properties reveal the activation energy behaviour with reference to the glass transition temperature (80 degrees C) of PVA. The dielectric hysteresis with the temperature cycle reveals a remnant polarization. The enhanced dielectric properties are suggested to be the result of improvement in the localized polarization of the integrated interface system (Maxwell-Wagner-Sillars (MWS) polarization) formed by the uniform adsorption of Fe3O4 on the surface of SLGAPC conjugated with PVA. The EMI shielding property of the composite with a low thickness of 0.3 mm in the X-band (8.2-12.4 GHz) shows a very impressive shielding efficiency of similar to 15 dB and a specific shielding effectiveness of 20 dB (g cm(-3))(-1), indicating the promising character of this material for flexible EMI shielding applications.

}, issn = {1463-9076}, doi = {10.1039/c5cp02476e}, author = {Rao, B. V. Bhaskara and Yadav, Prasad and Aepuru, Radhamanohar and Panda, H. S. and Ogale, Satishchandra and Kale, S. N.} } @article { ISI:000367546300012, title = {Synthesis, crystal structure and in vitro DNA binding studies of combretastatin A-4 analogue}, journal = {Croatica Chemica Acta}, volume = {88}, number = {3}, year = {2015}, month = {DEC}, pages = {289-296}, publisher = {CROATIAN CHEMICAL SOC}, address = {MARULICEV TRG 19/II, 41001 ZAGREB, CROATIA}, abstract = {

Synthesis of a novel Combretastatin A-4 analogue using Schiff{\textquoteright}s reaction of benzil and 4-aminoantipyrine has been achieved under solvent free conditions. The structure of compound was examined spectroscopically and confirmed from single crystal diffraction studies. The synthesized Combretastatin A-4 analogue was investigated for its DNA binding ability as the plausible mechanism for its antitumor activity. The binding propensity of the synthesized compound with calf-thymus (CT) DNA was monitored with absorption and emission spectrophotometric titrations. The calculations predict a binding constant of 7.24 x 10(4) for the complex of the synthesized compound with CT DNA which is comparable in magnitude to that of DNA binding of bactericidal drug enoxacin and typical intercalation indicator ethidium bromide (EB). Competitive binding studies of the synthesized compound with EB using fluorescence titration reveal that it displaces the DNA-bound EB and binds in intercalative mode which was further supported by circular dichroism (CD) spectroscopy. The probable site and binding energy of the compound with DNA was further theoretically investigated by molecular docking studies. The significant DNA binding ability of the synthesized Combretastatin A4 analogue as revealed from this study could be related to the anticancer activity of the Combretastatin A4.

}, keywords = {benzil, bio-physical, combretastatin A-4, crystal structure, DNA binding, ethidium bromide, fluorescence, phenazones}, issn = {0011-1643}, doi = {10.5562/cca2662}, author = {Rizvi, Masood Ahmad and Dangat, Yuvraj B. and Yaseen, Zahid and Gupta, Vivek and Khan, Khaliquz Zaman} } @article {43035, title = {Synthesis of N, F and S co-doped graphene quantum dots}, journal = {Nanoscale}, volume = {7}, year = {2015}, month = {MAY}, pages = {11515-11519}, abstract = {

Graphene quantum dots (GQDs) are a promising category of materials with remarkable size dependent properties like tunable bandgap and photoluminescence along with the possibility of effective chemical functionalization. Doping of GQDs with heteroatoms is an interesting way of regulating their properties. Herein, we report a facile and scalable one-step synthesis of luminescent GQDs, substitutionally co-doped with N, F and S, of similar to 2 nm average size by a microwave treatment of multi-walled carbon nanotubes in a customized ionic liquid medium. The use of an ionic liquid coupled with the use of a microwave technique enables not only an ultrafast process for the synthesis of co-doped GQDs, but also provides excellent photoluminescence quantum yield (70\%), perhaps due to the interaction of defect clusters and dopants.

}, author = {Kundu, Sumana and Yadav, Ram Manohar and Narayanan, T. N. and Shelke, Manjusha V. and Vajtai, Robert and Ajayan, Pulickel M. and Pillai, Vijayamohanan K.} } @article { ISI:000355360200058, title = {Vitellibacter nionensis sp nov., isolated from a shallow water hydrothermal vent}, journal = {International Journal of Systematic and Evolutionary Microbiology}, volume = {65}, number = {2}, year = {2015}, month = {FEB}, pages = {692-697}, publisher = {SOC GENERAL MICROBIOLOGY}, address = {MARLBOROUGH HOUSE, BASINGSTOKE RD, SPENCERS WOODS, READING RG7 1AG, BERKS, ENGLAND}, abstract = {

A novel, Gram-stain-negative, non-motile, rod-shaped yellow bacterium, designated VBW088(T) was isolated from a shallow water hydrothermal vent in Espalamaca in the Azores. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain VBW088(T) clustered with three type strains of species of the genus Vitellibacter and exhibited a sequence similarity of 97.3\% with Vitellibacter soesokkakensis RSSK-12(T). However, strain VBW088(T) and V. soesokkakensis RSSK-12(T) exhibited low DNA-DNA relatedness (12.7 +/- 3.5 \%). Strain VBW088(T) was positive for catalase and oxidase. Growth occurred at 10-37 degrees C, with the optimum at 80 degrees C, and at pH 6.0-8.0 (optimum pH 6.0) and in up to 5\% (w/v) NaCl with optimum growth at 1-2\% (w/v) NaCl. The major fatty acids (\>10\%) were iso-C-15:0 (33.5\%) and iso-C-17:0 3-OH (32.0\%). The polar lipids detected in strain VBW088(T) consisted of phosphatidylethanolamine, one unidentified aminolipid and three unidentified phospholipids. The DNA G+C content of strain VBW088(T) was 36.7 mol\%. On the basis of phylogenetic inference, DNA-DNA relatedness, chemotaxonomic analysis and physiological data, the isolate represents a novel species of the genus Vitellibacter, for which the name Vitellibacter nionensis sp. nov. is proposed, with the type strain as VBW088(T). (=KCTC 32420(T)=MCC 2354(T)).

}, issn = {1466-5026}, doi = {10.1099/ijs.0.070805-0}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Yoon, Jung-Hoon and Dastager, Syed Gulam and Liu, Qing and Thi-Nhan Khieu and Chu Ky Son and Li, Wen-Jun and Colaco, Ana} } @article {43051, title = {Benz{\textendash}amidinato stabilized a monomeric calcium Iodide and a lithium calciate(II) cluster featuring group 1 and group 2 elements}, journal = {ChemistrySelect}, volume = {1}, year = {2016}, month = {APR}, pages = {1066{\textendash}1071}, abstract = {

Soluble calcium halides reported so far are mostly dimeric in nature. The halides occupy the bridging position and thus provide additional coordination to the metal. We obtained a monomeric calcium iodide [{PhC(NiPr)(2)} CaI(thf)(3)] (1) from the reaction of [PhC(NiPr)(2)] Li with Cal(2) in THF. The compound has been stabilized by electronic donation and steric shielding from the amidinate ligand as well as coordination of three THF molecules. 1 does not show any propensity towards ligand exchange reaction. When the same reaction is carried out in diethyl ether instead of THF, it led to the formation of a Li calciate(II) cluster of composition L2Ca4I8Li4O (L= PhC(NiPr)(2)) (2) with an encapsulated O2+ in the middle of a tetrahedron spanned by four Ca2+ ions. 2 represents a metal-rich halide comprising of both alkali and alkaline earth metals which is quite unprecedented. Another notable aspect is that the amidinate ligand binds to the calcium atom in chelating bidentate mode in 1, whereas in 2 each N atom of the amidinate ligands binds to two Ca atoms leading to bridging bis-chelating coordination mode.

}, doi = {10.1002/slct.201600285}, author = {Yadav, Sandeep and Swamy, V. S. V. S. N. and Gonnade, Rajesh G. and Sen, Sakya S.} } @article {43373, title = {CeCl3 center dot 7H(2)O-NaI promoted regioselective sulfenylation of indoles with sulfonylhydrazides}, journal = {Chemistryselect}, volume = {1}, year = {2016}, month = {JAN}, pages = {81-85}, abstract = {A simple and highly efficient method has been developed for the regioselective sulfenylation of a wide variety of indoles with alkyl and aryl sulfonylhydrazides as a sulphur source and CeCl3 center dot 7H(2)O-Nal as an inexpensive and readily available reagent system. This method involves the breaking of sulfur-oxygen and sulfur-nitrogen bonds and making of carbon-sulfur bond. The method provides high yields of the products with enhanced regioselectivity. We studied the reactivity of various electron rich and electron deficient indoles towards the sulfe-nylation reaction. The indoles containing electron donating group reacts fast towards the sulfenylation reaction as compared to the indoles containing electron withdrawing groups. More over functional groups like alkoxy, aryloxy, bromo, nitro, cyano, ester, were well tolerated under the established reaction conditions. We also proposed a plausible mechanism for this transformation. The experimental simplicity and environmentally benign nature of the reagent system makes this method an attractive alternative to established methods.}, doi = {10.1002/slct.201500014}, author = {Nookaraju, U. and Begari, Eeshwaraiah and Yetra, Ravikiran Reddy and Kumar, Pradeep} } @article { ISI:000378450800001, title = {Characterization of two coleopteran alpha-amylases and molecular insights into their differential inhibition by synthetic alpha-amylase inhibitor, acarbose}, journal = {Insect Biochemistry and Molecular Biology}, volume = {74}, year = {2016}, month = {JUL}, pages = {1-11}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Post-harvest insect infestation of stored grains makes them unfit for human consumption and leads to severe economic loss. Here, we report functional and structural characterization of two coleopteran alpha-amylases viz. Callosobruchus chinensis alpha-amylase (CcAmy) and Tribolium castaneum alpha-amylase (TcAmy) along with their interactions with proteinaceous and non-proteinaceous alpha-amylase inhibitors. Secondary structural alignment of CcAmy and TcAmy with other coleopteran alpha-amylases revealed conserved motifs, active sites, di-sulfide bonds and two point mutations at spatially conserved substrate or inhibitor binding sites. Homology modeling and molecular docking showed structural differences between these two enzymes. Both the enzymes had similar optimum pH values but differed in their optimum temperature. Overall, pattern of enzyme stabilities were similar under various temperature and pH conditions. Further, CcAmy and TcAmy differed in their substrate affinity and catalytic efficiency towards starch and amylopectin. HPLC analysis detected common amylolytic products like maltose and maltotriose while glucose and malto-tetrose were unique in CcAmy and TcAmy catalyzed reactions respectively. At very low concentrations, wheat alpha-amylase inhibitor was found to be superior over the acarbose as far as complete inhibition of amylolytic activities of CcAmy and TcAmy was concerned. Mechanism underlying differential amylolytic reaction inhibition by acarbose was discussed. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Acarbose, alpha-amylase, alpha-amylase inhibitor, Callosobruchus chinensis, Coleoptera, Tribolium castaneum}, issn = {0965-1748}, doi = {10.1016/j.ibmb.2016.04.009}, author = {Channale, Sonal M. and Bhide, Amey J. and Yadav, Yashpal and Kashyap, Garima and Pawar, Pankaj K. and Maheshwari, V. L. and Ramasamy, Sureshkumar and Giri, Ashok P.} } @article { ISI:000370029900002, title = {Compounds with low-valent p-block elements for small molecule activation and catalysis}, journal = {Chemcatchem}, volume = {8}, number = {3}, year = {2016}, month = {FEB}, pages = {486-501}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

The past decade has witnessed staggering progress in the chemistry of compounds with low-valent main-group elements. Although these discoveries are mostly fundamental by nature, these compounds show promising reactivity towards small molecule activation. The reactivity of these compounds stems from the modest HOMO-LUMO energy gap; a characteristic known for the transition metals. The journey began in 2005 with the facile activation of dihydrogen by an alkyne analog of germanium [ArGeGeAr; Ar=2,6-Trip(2)-C6H3 (Trip=2,4,6-iPr(3)-C6H2)]. Subsequently, tremendous progress has been achieved in understanding and elucidating the potential of these compounds to activate small molecules as well as to use them in a variety of stoichiometric and catalytic transformations. In this review, we focus on developments in the activation of H-2, NH3, CO, and CO2 by compounds with multiply bound or open shell main-group elements. Emphasis will be given to their catalytic activity.

}, keywords = {activation, carbenes, main-group elements, silylenes, small molecules}, issn = {1867-3880}, doi = {10.1002/cctc.201501015}, author = {Yadav, Sandeep and Saha, Sumana and Sen, Sakya S.} } @article {42544, title = {Continuous flow doebner{\textendash}miller reaction and isolation using continuous stirred tank reactors}, journal = {Organic Process Research \& Development}, volume = {20}, year = {2016}, month = {AUG}, pages = {1621{\textendash}1625}, abstract = {

Continuous flow Doebner{\textendash}Miller synthesis of different quinaldines from respective anilines is demonstrated using sulfuric acid as a homogeneous catalyst. The extent of reaction was monitored for various parameters, namely, temperature, residence time, mole ratio of sulfuric acid to substrate, mole ratio of crotonaldehyde to substrate, and so forth. Continuous stirred reactors in series were used as a preferred configuration for this rection that generates byproduct in the form of sticky solid material. The approach has been extended for six different anilines, and the results are compared with batch reactions. Continuous stirred reactors in series with distributed dosing of crotonaldehyde facilitated a continuous flow reaction with lower byproduct formation, increased yields, and continuous workup and is a scalable approach.

}, doi = {10.1021/acs.oprd.6b00179}, author = {Yadav, Maruti B. and Kulkarni, Sourabh and Joshi, Ramesh A. and Kulkarni, Amol A.} } @article { ISI:000377424600004, title = {Efficient cellular entry of (r-x-r)-type carbamate-plasmid DNA complexes and its implication for noninvasive topical DNA delivery to skin}, journal = {Molecular Pharmaceutics}, volume = {13}, number = {6}, year = {2016}, month = {JUN}, pages = {1779-1790}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Arginine-rich cell penetrating peptides are powerful tools for in vitro as well as in vivo delivery of a wide plethora of biomolecules. However, presence of consecutive arginine residues leads to enhanced amenability for proteolytic degradation as well as steric hindrances for membrane interactions which compromise its bioavailability. In order to overcome these limitations we previously reported a safe and stable octaarginine based oligomer, i.e., (r-x-r)4-carbamate, where the backbone amide linkages were replaced by carbamate linkages and 6-aminohexanoic acid based spacer moieties were incorporated for better flexibility, hydrophobicity, optimal spacing of guanidinium groups, and protection against proteolytic cleavage; resulting in improved transfection efficiency over its amide counterpart. In the present work we have investigated the mechanism behind this enhanced transfection efficiency and, based on our observations, demonstrate how the synergistic effect of rationalized oligomer designing, complex characteristics, and cell type contributes to overall effective intracellular delivery. Our results indicate that the (r-x-r)4-carbamate plasmid DNA complexes primarily utilize lipid raft dependent pathway of cellular entry more than other pathways, and this possibly facilitates their increased entry in the lipid raft rich milieu of skin cells. We also emphasize the utility of oligomer (r-x-r)4-carbamate as an efficient carrier for topical delivery of nucleic acids in skin tissue. This carrier can be utilized for safe, efficient, and noninvasive delivery of therapeutically relevant macromolecular hydrophilic cargo like nucleic acids to skin.

}, keywords = {Cell penetrating peptides, endocytosis, nucleic acid delivery, skin penetration, transfection}, issn = {1543-8384}, doi = {10.1021/acs.molpharmaceut.5b00915}, author = {Vij, Manika and Natarajan, Poornemaa and Yadav, Amit K. and Patil, Kiran M. and Pandey, Tanuja and Gupta, Nidhi and Santhiya, Deenan and Kumar, Vaijayanti A. and Fernandes, Moneesha and Ganguli, Munia} } @article { ISI:000368065300033, title = {Enantioselective synthesis of spirocyclohexadienones by NHC-catalyzed formal [3+3] annulation reaction of enals}, journal = {Angewandte Chemie-International Edition}, volume = {55}, number = {1}, year = {2016}, month = {JAN}, pages = {268-272}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

The enantioselective synthesis of pyrazolone-fused spirocyclohexadienones was demonstrated by the reaction of alpha,beta-unsaturated aldehydes with alpha-arylidene pyrazolinones under oxidative N-heterocyclic carbene (NHC) catalysis. This atom-economic and formal [3+3] annulation reaction proceeds through a vinylogous Michael addition/spiroannulation/dehydrogenation cascade to afford spirocyclic compounds with an all-carbon quaternary stereocenter in moderate to good yields and excellent ee values. Key to the success of the reaction is the cooperative NHC-catalyzed generation of chiral alpha,beta-unsaturated acyl azoliums from enals, and base-mediated tandem generation of dienolate/enolate intermediates from pyrazolinones.

}, keywords = {annulation reactions, asymmetric catalysis, N-heterocyclic carbenes, organocatalysis, spiro compounds}, issn = {1433-7851}, doi = {10.1002/anie.201507802}, author = {Yetra, Santhivardhana Reddy and Mondal, Santigopal and Mukherjee, Subrata and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article {42946, title = {[Et3NH][HSO4] catalyzed efficient synthesis of 5-arylidene-rhodanine conjugates and their antitubercular activity}, journal = {Research on Chemical Intermediates}, volume = {42}, year = {2016}, month = {AUG}, pages = {6607-6626}, abstract = {

We have described a highly efficient, safer protocol for the synthesis of 5-arylidene-rhodanine conjugates catalyzed by Bronsted acidic ionic liquid [Et3NH][HSO4] in excellent yields. The protocol offers cost-effective, environmentally benign, solvent-free conditions and recycle-reuse of the catalyst. The synthesized 5-arylidene-rhodanine conjugates were characterized on the basis of (1) H NMR, C-13 NMR and HRMS spectral data. A series of 5-arylidene-rhodanine derivatives 3a-h, 4a-h were synthesized and evaluated for their in vitro antitubercular activity against dormant Mycobacterium tuberculosis H37Ra and M. bovis BCG strains. Moreover, compounds 3a, 3b, 3e, 3f, 3g, 3h and 4f exhibited good antitubercular activity and were also evaluated for anti-proliferative activity against MCF-7, A549 and HCT116 cell lines using modified MTT assay and found to be noncytotoxic. Compounds 3a-h and 4f were further screened for their antibacterial activity against four bacteria strains to assess their selectivity towards M. tuberculosis. Furthermore, in silico ADME prediction of all the tested compounds followed the criteria for orally active drug and, therefore, these compounds may have a good potential for eventual development as oral agents.

}, doi = {10.1007/s11164-016-2484-0}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nawale, Laxman and Yeware, Amar and Sarkar, Dhiman and Shingate, Bapurao B.} } @article { ISI:000378295200030, title = {Facile access to a Ge(II) dication stabilized by isocyanides}, journal = {Chemical Communications}, volume = {52}, number = {50}, year = {2016}, month = {MAY}, pages = {7890-7892}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein, we introduce isocyanide as a ligand in main group chemistry and describe the facile isolation of a Ge(II) dication. The reaction of 2,6-dimethylphenylisocyanide with GeCl2 leads to the formation of a Ge(II) dication with two [GeCl3](-) molecules as counter anions. The dicationic Ge(II) center is bound to four isocyanide ligands and also holds a lone pair of electrons. DFT calculations reveal that the dication is stabilized only by sigma-donation from the four isocyanide ligands. Natural population analysis gives a charge of +0.74 on the Ge(II) center, indicating that the positive charge is shared by the isocyanide substituents.

}, issn = {1359-7345}, doi = {10.1039/c6cc03789e}, author = {Swamy, V. S. V. S. N. and Yadav, Sandeep and Pal, Shiv and Das, Tamal and Vanka, Kumar and Sen, Sakya S.} } @article { ISI:000371344600012, title = {Facile synthesis of 1,3-thiazolidin-4-ones as antitubercular agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {7}, year = {2016}, month = {APR}, pages = {1704-1708}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We have developed, highly efficient, one-pot, solvent-free, [Et3NH][HSO4] catalyzed multicomponent reaction protocol for the synthesis of 1,3-thiazolidin-4-ones in excellent yields. For the first time, the 1,3-thiazolidin-4-ones were evaluated in vitro for their antimycobacterial activity against Mycobacterium tuberculosis dormant MTB H37Ra and Mycobacterium bovis BCG strains. Among the synthesized basic 1,3-thiazolidin-4-ones, particularly the compounds 4c, 4d, 4e, 4f, 4h, 4i and 4j displays promising antitubercular activity along with no significant cytotoxicity against the cell lines MCF-7, A549 and HCT-116. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Antitubercular, Cytotoxicity, Green protocol, Multicomponent reaction}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.02.056}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Arkile, Manisha A. and Yeware, Amar and Sarkar, Dhiman and Shingate, Bapurao B.} } @article {45636, title = {Graphene oxide sheathed ZIF-8 microcrystals: engineered precursors of nitrogen-doped porous carbon for efficient oxygen reduction reaction (ORR) electrocatalysis}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {29373-29382}, type = {Article}, abstract = {

Nitrogen containing mesoporous carbon obtained by the pyrolysis of graphene oxide (GO) wrapped ZIF-8 (Zeolitic Imidazolate Frameworks-8) micro crystals is demonstrated to be an efficient catalyst for the oxygen reduction reaction (ORR). ZIF-8 synthesis in the presence of GO sheets helped to realize layers of graphene oxide over ZIF-8 microcrystals and the sphere-like structures thus obtained, on heat treatment, transformed to highly porous carbon with a nitrogen content of about 6.12\% and surface area of 502 m(2)/g. These catalysts with a typical micromeso porous architecture exhibited an onset potential of 0.88Vvs RHE in a four electron pathway and also demonstrated superior durability in alkaline medium compared to that of the commercial Pt/C catalyst. The N-doped porous carbon derived from GO sheathed ZIF-8 core shell structures could therefore be employed as an efficient electrocatalyst for fuel cell applications.

}, keywords = {alkaline fuel cell, graphene oxide, N-doped carbon, oxygen reduction reaction, porous carbon, ZIF-8}, issn = {1944-8244}, doi = {10.1021/acsami.6b06979}, author = {Thomas, Minju and Illathvalappi, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, Abdul Azeez Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {42940, title = {GSH Induced controlled release of levofloxacin from a purpose-built prodrug: luminescence response for probing the drug release in escherichia coli and staphylococcus aureus}, journal = {Bioconjugate Chemistry}, volume = {27}, year = {2016}, month = {SEP}, pages = {2062-2070}, abstract = {

Fluoroquinolones are third-generation broad spectrum bactericidal antibiotics and work against both Gram-positive and Gram-negative bacteria. Levofloxacin (L), a fluoroquinolone, is widely used in anti-infective chemotherapy and treatment of urinary tract infection and pneumonia. The main pathogen for urinary tract infections is Escherichia colt, and Streptococcus pneumoniae is responsible for pneumonia, predominantly a lower respiratory tract infection. Poor permeability of L leads to the use of higher dose of this drug and excess drug in the outer cellular fluid leads to central nervous system (CNS) abnormality. One way to counter this is to improve the lipophilicity of the drug molecule, and accordingly, we have synthesized two new Levofloxacin derivatives, which participated in the spatiotemporal release of drug via disulfide bond cleavage induced by glutathione (GSH). Recent studies with Streptococcus mutants suggest that it is localized in epithelial lining fluid (ELF) of the normal lower respiratory tract and the effective [GSH] in ELF is similar to 430 mu M. E. coli typically cause urinary tract infections and the concentration of GSH in porcine bladder epithelium is reported as 0.6 mM for a healthy human. Thus, for the present study we have chosen two important bacteria (Gram + ve and Gram - ve), which are operational in regions having high extracellular GSH concentration. Interestingly, this supports our design of new lipophilic Levofloxacin based prodrugs, which released effective drug on reaction with GSH. Higher lipophilicity favored improved uptake of the prodrugs. Site specific release of the drug (L) could be achieved following a glutathione mediated biochemical transformation process through cleavage of a disulfide bond of these purpose-built prodrugs. Further, appropriate design helped us to demonstrate that it is possible also to control the kinetics of the drug release from respective prodrugs. Associated luminescence enhancement helps in probing the release of the drug from the prodrug in bacteria and helps in elucidating the mechanistic pathway of the transformation. Such an example is scarce in the contemporary literature.

}, doi = {10.1021/acs.bioconjchem.6b00324}, author = {Pal, Suman and Ramu, Vadde and Taye, Nandaraj and Mogare, Devraj G. and Yeware, Amar M. and Sarkar, Dhiman and Reddy, D. Srinivasa and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000380052000012, title = {Highly stable laser-scribed flexible planar microsupercapacitor using mushroom derived carbon electrodes}, journal = {Advanced Materials Interfaces}, volume = {3}, number = {11}, year = {2016}, month = {JUN}, pages = {1600057}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A report is presented on the fabrication of all solid-state interdigitated flexible microsupercapacitor using ultrafast and highly scalable laser scribing technique, using highly mesoporous carbon synthesized from biomass (mushroom) with hydrothermal preprocessing. The specific protocol used for carbon synthesis renders some unique property features to the material (surface area of 2604 m(2) g(-1) with hierarchical pore size distribution) in the context of supercapacitor electrode application. A polyvinyl alcohol (PVA)-H2SO4 gel electrolyte is used for electrochemical measurements. The microsupercapacitor shows high cyclic stability up to 15000 cycles. Moreover it shows nearly 90\% stability after 1000 bending cycles at 60 degrees angle. It also retains its performance even under 120 degrees bending condition. This work represents a facile and fast technique for microscaled device fabrication that can be easily commercialized. Moreover, the mushroom-derived carbon used to make the electrodes holds great promise in context of the stability and flexibility of flexible supercapacitors.

}, issn = {2196-7350}, doi = {10.1002/admi.201600057}, author = {Yadav, Poonam and Basu, Aniruddha and Suryawanshi, Anil and Game, Onkar S. and Ogale, Satishchandra} } @article {43393, title = {Kinetic studies on an algal biofilm reactor for raw sewage water treatment}, journal = {Chemical Engineering \& Technology}, volume = {39}, year = {2016}, month = {SEP}, pages = {1629-1635}, abstract = {A packed-bed algae biofilm reactor was developed using porous and nonporous dual packings. The biofilm was cultivated on reticulated polyurethane foam cubes. The nonporous glass Raschig rings were taken as bed support that helps to remove generated gas from the system. The effect of variables such as column length-to-diameter ratio, catalyst cube dimension, and feed flow rate on the treatment of sewage water was studied. The reaction kinetics indicates that the nutrients uptake rate is dependent on both pore and film diffusion. The kinetics of uptake of nutrients follows a pseudo first-order reaction. From the pseudo reaction rate constant, Thiele modulus and effectiveness factor were calculated and a kinetic model equation for fractional nutrient uptake was developed in terms of operating variables. The model can predict the reaction rate with low deviation. The results obtained may be valuable for large-scale treatment of sewage water.}, doi = {10.1002/ceat.201500447}, author = {Gera, Gayatri S. and Yewalkar, Swati N. and Nene, Sanjay and Kulkarni, Bhaskar D. and Kamble, Sanjay P.} } @article {43595, title = {Minute-made activated porous carbon from agro-waste for Li-ion battery anode using a low power microwave oven}, journal = {Electrochimica ACTA}, volume = {212}, year = {2016}, month = {SEP}, pages = {535-544}, abstract = {We demonstrate a very simple, cost-effective and superfast process for making Li-ion battery (LIB) anode grade carbon from agro-waste in the form of sugarcane bagasse using a low power microwave system. Activation of this bagasse derived carbon is carefully optimized by using various weight ratios of KOH to obtain the desired properties of functional carbon in terms of porosity and electrical conductivity. Low equivalent series resistance (ESR), low charge transfer resistance with good electrical conductivity, and optimum porosity for efficient ion diffusion make this carbon a good candidate for Li-ion battery anode material rendering a reversible capacity of 757 mAhg (1) at a current density of 100 mAg (1) and a good cycling performance at high current rates. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.electacta.2016.07.011}, author = {Agarkar, Shruti and Yadav, Poonam and Fernandes, Rohan and Kothari, Dushyant and Suryawanshi, Anil and Ogale, Satishchandra} } @article { ISI:000373739700035, title = {Novel tetrazoloquinoline-rhodanine conjugates: highly efficient synthesis and biological evaluation}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {9}, year = {2016}, month = {MAY}, pages = {2278-2283}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In search of new active molecules against Mycobacterium tuberculosis (MTB) H37Ra and Mycobacterium bovis BCG, a small focused library of rhodanine incorporated tetrazoloquinoline has been efficiently synthesized by using [HDBU][HSO4] acidic ionic liquid. The compound 3c found to be promising inhibitor of MTB H37Ra and M. bovis BCG characterized by lower MIC values 4.5 and 2.0 mu g/mL, respectively. The active compounds were further tested for cytotoxicity against HeLa, THP-1, A549 and PANC-1 cell lines using MTT assay and showed no significant cytotoxic activity at the maximum concentration evaluated. Again, the synthesized compounds were found to have potential antifungal activity. Furthermore, to rationalize the observed biological activity data, the molecular docking study also been carried out against a potential target Zmp1 enzyme of MTB H37Ra, which revealed a significant correlation between the binding score and biological activity for these compounds. The results of in vitro and in silico study suggest that these compounds possess ideal structural requirement for the further development of novel therapeutic agents. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {antifungal, Antitubercular, Cytotoxicity, Docking study, Rhodanine derivatives}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.03.045}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nawale, Laxman and Yeware, Amar and Sarkar, Dhiman and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Shingate, Bapurao B.} } @article { ISI:000369533400015, title = {Phenylacetylene hydrogenation on Au@Ni bimetallic core-shell nanoparticles synthesized under mild conditions}, journal = {Catalysis Science \& Technology}, volume = {6}, number = {3}, year = {2016}, month = {JAN}, pages = {708-712}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The synthesis of Au@Ni bimetallic core-shell nanoparticles through an energy efficient (lower temperature) route in oleylamine following a sequential reduction strategy is reported. The method is found to be useful for the synthesis of a very thin nickel shell (2 nm) over a gold core (15 nm). Synergistic effects are observed in catalyzing phenylacetylene hydrogenation under different solvent conditions.

}, issn = {2044-4753}, doi = {10.1039/c5cy02005k}, author = {Vysakh, A. B. and Lazar, Anish and Yadukiran, V. and Singh, A. P. and Vinod, C. P.} } @article {45869, title = {Recursive orthogonal least square based soft sensor for batch distillation}, journal = {Chemical product and process modeling}, volume = {11}, year = {2016}, month = {SEP}, pages = {241-263}, type = {Article}, abstract = {A multiple-input and multiple-output (MIMO) model, namely Recursive Orthogonal Least Square (ROLS) based radial basis function (RBF) is developed to estimate product compositions in a batch distillation process from temperature measurements. The process data is generated by simulating the differential equations of the batch distillation process, changing the initial feed composition and boiluprate from batch to batch. Moreover, the reflux ratio is also randomly varied within each batch to represent the exact dynamics of the batch distillation. Temperature and distillate composition is correlated by the RBF trained by ROLS algorithm. A Single RBF network estimate the quality of products in real-time. The results show that ROLS based estimator give correct composition estimations for a batch distillation process. The robustness of the ROLS algorithm and low computational requirement makes the estimator attractive for on-line use. }, doi = {10.1515/cppm-2015-0071}, author = {Mehta, S. and Ramani, H. and Yelgatte, N. N. and Rahman, I.} } @inbook {45872, title = {Remediation of domestic and industrial effluents using algae}, booktitle = {Algal Biorefinery: An Integrated Approach}, year = {2016}, pages = {401-437}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {In the environment, microbial activity is considered as one of the most important mechanisms for the abatement of water-borne pollutants. In the natural and anthropogenic environment the wide range of contaminates are not eliminated by single specie but by the complex interaction of a mixed microbial population performing complementary reactions. This principle is very much applicable for the treatment of the industrial and domestic wastewater, which has excess of nitrogenous compounds (N) and phosphates (P). N and P along with various organic pollutants, if not properly treated, would create a devastating impact on natural aquatic ecosystems. Among the many other disturbing impacts, most prevalent is the phenomenon of eutrophication, which is the accumulation of high levels of organic matter and the decomposing organisms, which deplete the oxygen in water, and causing the death of other organisms, such as fish. The excess nutrients in the aquatic ecosystem support the growth of various phytoplanktons. It not only spoils the water quality but also adversely affects the whole aquatic ecosystem. This chapter will address the possibility of effectively utilizing a natural microbial flora/consortium, enriched with the rapidly growing algae for the remediation of polluted water bodies.}, issn = {978-331922813-6;978-331922812-9}, doi = {10.1007/978-3-319-22813-6_18}, author = {Nene, S. N. and Gera, G. and Yewalkar, S. N.} } @conference {45823, title = {Role of Rhamnolipid: A biosurfactant in methane gas hydrate formation kinetics}, booktitle = {Proceedings of The First International Conference on Recent Advances in Bioenergy Research}, year = {2016}, month = {FEB}, publisher = {Sardar Swaran Singh Natl Inst Bio-Energy}, organization = {Sardar Swaran Singh Natl Inst Bio-Energy}, address = {7th Floor, Vijaya Building, 17, Barakhamba Rd, New Delhi, 110 001, India}, abstract = {

Naturally occurring methane gas hydrate is a vast source of methane gas which is trapped in crystalline ice-like structure present in permafrost regions and under the sea in outer continental margins. It is purposed that total amount of carbon in the form of methane hydrates is almost twice the carbon content in all the fossil fuel reserves put together, and hence these are supposed to be the future potential energy resource. This paper investigates the laboratory investigations on effect of a biosurfactant rhamnolipid on methane hydrate formation kinetics. Rhamnolipid was produced by Pseudomonas aeruginosa strain A11. The presence of P. aeruginosa has been reported in Gulf of Mexico gas hydrate samples. Biosurfactant reduced the surface tension of water from 72 to 36 mN/m with CMC of 70 mg/L. The biosurfactant dose is studied at two different concentrations in the solution at 100 and 1000 ppm. Kinetic of hydrate formation and growth is compared at 0, 100, and 1000 ppm of rhamnolipid showing that rhamnolipid acts as a hydrate promoter at these concentrations. Thus, small dosages of rhamnolipids produced by P. aeruginosa strain A11 must clearly affect the gas hydrate formation kinetics in natural sites (as in Gulf of Mexico).

}, keywords = {Induction time, methane hydrate, Potential energy resource, Pseudomonas aeruginosa, Rhamnolipid}, isbn = {978-81-322-2773-1; 978-81-322-2771-7}, doi = {10.1007/978-81-322-2773-1_25}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Kumar, Rajnish and Singh, Anil Kumar and Kumar, Pushpendra and Balomajumder, Chandrajit and Laik, Sukumar}, editor = {Kumar, S and Khanal, SK and Yadav, YK} } @article {45643, title = {Structural-functional insights and studies on saccharide binding of Sophora japonica seed lectin}, journal = {International Journal of Biological Macromolecules}, volume = {91}, year = {2016}, month = {OCT}, pages = {75-84}, type = {Article}, abstract = {

Functional and conformational transitions of the Sophora japonica seed lectin (SJL) were studied in detail using bioinformatics and biophysical tools. Homology model of the lectin displayed all the characteristics of the legume lectin monomer and the experimental observations correlated well with the structural information. In silico studies were performed by protein-ligand docking, calculating the respective binding energies and the residues involved in the interactions were derived from LigPlot(+) analysis. Fluorescence titrations showed three times higher affinity of T-antigen disaccharide than N-acetyl galactosamine (GaINAc) towards SJL indicating extended sugar binding site of the lectin. Thermodynamic parameters of T-antigen binding to SJL indicated the process to be endothermic and entropically driven while those of GaINAc showed biphasic process. SDS-PAGE showed post-translationally modified homotetrameric species of the lectin under native conditions. In presence of guanidine hydrochloride (0.5-5.0 M), the tetramer first dissociated into dimers followed by unfolding of the protein as indicated by size exclusion chromatography, fluorescence and CD spectroscopy. Different structural rearrangements were observed during thermal denaturation of SJL at physiological pH 7.2, native pH 8.5 and molten globule inducing pH 1.0. Topological information revealed by solute quenching studies at respective pH indicated differential hydrophobic environment and charge density around tryptophan residues. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Dissociation, docking, Homology model, Ligand binding, Sophora japonica seed lectin, Thermal transitions}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2016.05.047}, author = {Yadav, Priya and Shahane, Ganesh and Ramasamy, Sureshkumar and Sengupta, Durba and Gaikwad, Sushama} } @article { ISI:000373739700025, title = {Synthesis and docking studies of pyrazine-thiazolidinone hybrid scaffold targeting dormant tuberculosis}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {9}, year = {2016}, month = {MAY}, pages = {2224-2228}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The persistence of Mycobacterium tuberculosis (MTB) in dormant stage assists the pathogen to develop resistance against current antimycobactrial drugs. To address this issue, we report herein the synthesis of N-(4-oxo-2 substituted thiazolidin-3yl) pyrazine-2-carbohydrazide derivatives designed by following the molecular hybridization approach using pyrazine and thiazolidenone scaffolds. The compounds were evaluated against MTB H37Ra and Mycobacterium bovis BCG in dormancy model. Most of the compounds had IC50 values in 0.3-1 mu g/ml range. The active compounds were further tested for anti-proliferative activity against THP-1, Panc-1, A549, and MCF-7 cell lines using MTT assay and exhibited no significant cytotoxicity. We also report molecular docking studies using active analogs and MTB Decaprenylphosphoryl-beta-D-ribose-2{\textquoteright}-epimerase (DprE1) to rationalize the biological activity and to provide an insight into the probable mechanism of action and binding mode of hybridized structures. The results obtained validate the use of molecular hybridization approach and also suggest that reported compounds can provide a novel pharmacophore to synthesize lead compounds against dormat MTB. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {docking, Dormant, Hybrid design, Pyrazine, Thiazolidenone, tuberculosis}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.03.055}, author = {Chitre, T. S. and Asgaonkar, K. D. and Miniyar, P. B. and Dharme, A. B. and Arkile, Manisha A. and Yeware, A. and Sarkar, Dhiman and Khedkar, Vijay M. and Jha, Prakash C.} } @article {42431, title = {Synthesis of 4H-chromenes by an unexpected, K3PO4-mediated intramolecular rauhut{\textendash}currier type reaction}, journal = {Organic \& Biomolecular Chemistry}, volume = {14}, year = {2016}, month = {APR}, pages = {5612-5616}, abstract = {

In an attempt to develop the umpolung of Michael acceptors using chalcones having an enoate moiety under N-heterocyclic carbene (NHC) catalysis, a K3PO4-mediated intramolecular Rauhut{\textendash}Currier type reaction was observed. This C(sp2){\textendash}C(sp2) coupling reaction afforded the biologically important 4H-chromenes in moderate to good yields. It is likely that the enol ether functionality acts as the nucleophilic trigger in this reaction.

}, doi = {10.1039/C6OB00654J}, author = {Bhunia, Anup and Yetra, Santhivardhana Reddy and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article {45830, title = {Synthesis of Au@Ni bimetallic core shell nanoparticle and nanochains in soyabean oil and their catalytic hydrogenation reactions}, journal = {ChemistrySelect}, volume = {1}, year = {2016}, month = {FEB}, pages = {140-146}, type = {Article}, abstract = {

Synthesis of Au@Ni bimetallic core shell nanostructures using commercially available soya bean oil as the solvent through a sequential reduction strategy is reported. The energy efficiency and economic viability comes from the much milder temperatures and replacement of expensive and environmentally hazardous solvents like long chain organic amines and acids previously reported for synthesis. Thus, core shell nanoparticles having size regime of 10-15 nm with an excellent control over the nickel shell thickness (2 nm) over the gold core (8-10 nm) and Au@Ni nanochains is achieved. The synthesized materials are demonstrated to synergistically catalyze hydrogenation of nitro and C-C multiple bonds with much better efficiency as compared to individual nanoparticle counterparts.

}, keywords = {Bimetallic nanoparticles, Gold catalysis, hydrogenation reactions, synergistic effects}, issn = {2365-6549}, doi = {10.1002/slct.201500006}, author = {Bharathan, Vysakh A. and Yadukiran, V. and Lazar, Anish and Singh, Anand. P. and Vinod, Chathakudath P.} } @article { ISI:000368207600013, title = {Total synthesis of isocladosporin and 3-epi-isocladosporin}, journal = {Tetrahedron Letters}, volume = {57}, number = {1}, year = {2016}, month = {JAN}, pages = {53-55}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A convergent total synthesis of isocladosporin and 3-epi-isocladosporin is reported starting from commercially available homoallyl alcohol in 10 longest linear steps with 28\% overall yield. The key steps involved in the synthesis are cross-metathesis, tandem isomerization followed by C-O and C-C bond formation reactions for the synthesis of trans-2,6-disubstituted dihydropyrans developed by us, acylation reaction and Luche reaction. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Acylation reaction, Cross-metathesis, Iodocyclization, Isocladosporin 3-epi-Isodadosporin, Luche reduction}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2015.11.060}, author = {Mohapatra, Debendra K. and Maity, Saurabh and Banoth, Shivalal and Gonnade, Rajesh G. and Yadav, J. S.} } @article {44032, title = {Amaranthus caudatus lectin with polyproline II fold: conformational and functional transitions and molecular dynamics}, journal = {Journal of biomolecular Structure \& Dynamics}, volume = {1}, year = {2017}, month = {JUL}, type = {Article}, abstract = {Polyproline II (PPII) fold, a peculiar structural element was detected in the Amaranthus caudatus seed lectin (ACL) based on far UV circular dichroism spectrum, conformational transitions of the lectin and a distinct isodichroic point in thermal denaturation. It was confirmed by using PolyprOnline database to estimate the percentage of amino acids contributing to PPII fold and showed the values as 13.5\% and 13.9\% for PROSS and XTLSSTR, respectively. Investigations of the functional and conformational transitions of ACL during thermal, pH and guanidine hydrochloride (GdnHCl) induced denaturation were carried out using biochemical and biophysical techniques and molecular dynamics (MD) simulations approach. The lectin got aggregated at 60 {\textdegree}C with instantaneous structural alterations. The aggregation-prone regions in ACL were predicted using online servers viz. AGGRESCAN, AmylPred, FoldAmyloid and Waltz that were represented by Visual Molecular Dynamics tools. Nine conserved regions were identified by these softwares as being {\textquoteleft}hot-spots{\textquoteright} for aggregation. MD simulation studies of the lectin at 60 {\textdegree}C revealed increase in radius of gyration. The loss of PPII fold in 2.0 M GdnHCl was reversible. The partially unfolded intermediate of ACL with diminished PPII fold formed at pH 1.0 was stable up to 90 {\textdegree}C. The polyproline II fold has been rarely detected in lectins, ACL being the second after the potato lectin.}, doi = {10.1080/07391102.2017.1345328}, author = {Yadav, Priya and Shahane, Ganesh and Gaikwad, Sushama M.} } @article {43949, title = {Assessing therapeutic potential of molecules: molecular property diagnostic suite for tuberculosis}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {MAY}, pages = {515-531}, type = {Article}, abstract = {

Abstract: Molecular Property Diagnostic Suite (MPDS TB) is a web tool (http://mpds.osdd.net) designed to assist the in silico drug discovery attempts towards Mycobacterium tuberculosis (Mtb). MPDS TB tool has nine modules which are classified into data library (1{\textendash}3), data processing (4{\textendash}5) and data analysis (6{\textendash}9). Module 1 is a repository of literature and related information available on the Mtb. Module 2 deals with the protein target analysis of the chosen disease area. Module 3 is the compound library consisting of 110.31 million unique molecules generated from public domain databases and custom designed search tools. Module 4 contains tools for chemical file format conversions and 2D to 3D coordinate conversions. Module 5 helps in calculating the molecular descriptors. Module 6 specifically handles QSAR model development tools using descriptors generated in the Module 5. Module 7 integrates the AutoDock Vina algorithm for docking, while module 8 provides screening filters. Module 9 provides the necessary visualization tools for both small and large molecules. The workflow-based open source web portal, MPDS TB 1.0.1 can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. Graphical Abstract: SYNOPSIS: A web-based MPDS TB Galaxy tool is developed for assessing therapeutic potential of molecules. MPDS TB is categorized into Data Library, Data Processing and Data Analysis. It can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. [Figure not available: see fulltext.] {\textcopyright} 2017, Indian Academy of Sciences.

}, keywords = {chemical analysis, Chemoinformatics, computational chemistry, Diagnosis, Drug discovery portal, Information analysis, Libraries, Molecular graphics, Molecules, Neglected diseases, Open science, Portals, tuberculosis, Web-based technology, Websites}, issn = {0974-3626}, doi = {10.1007/s12039-017-1268-4}, author = {Gaur, A. S. and Bhardwaj, A. and Sharma, A. and John, L. and Vivek, M. R. and Tripathi, N. and Bharatam, P. V. and Kumar, R. and Janardhan, S. and Mori, A. and Banerji, A. and Lynn, A. M. and Hemrom, A. J. and Passi, A. and Singh, A. and Kumar, A. and Muvva, C. and Madhuri, C. and Choudhury, C. and Kumar, D. A. and Pandit, D. and Bharti, D. R. and Kumar, D. and Singam, E. A. and Raghava, G. P. and Sailaja, H. and Jangra, H. and Raithatha, K. and Tanneeru, K. and Chaudhary, K. and Karthikeyan, M. and Prasanthi, M. and Kumar, N. and Yedukondalu, N. and Rajput, N. K. and Saranya, P. S. and Narang, P. and Dutta, Prantu and Krishnan, R.} } @article {45666, title = {Benz-amidinato calcium iodide catalyzed aldehyde and ketone hydroboration with unprecedented functional group tolerance}, journal = {Chemical Communications}, volume = {53}, year = {2017}, month = {APR}, pages = {4562-4564}, type = {Article}, abstract = {A benz-amidinato calcium compound, [PhC(NiPr)(2)Cal] (1), catalyzed hydroboration of a wide range of aldehydes and ketones using pinacolborane (HBpin) at room temperature is reported. The catalyst shows functional group tolerance even towards OH and NH groups. The strategy was further extended to imines.}, doi = {10.1039/c7cc02311a}, author = {Yadav, S. and Pahar, S. and Sen, S. S.} } @article {44175, title = {Chitosan intercalated metal organic gel as a green precursor of fe entrenched and fe distributed N-doped mesoporous graphitic carbon for oxygen reduction reaction}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {SEP}, pages = {8762-8770}, type = {Article}, abstract = {

Herein, we present Metal-Organic Gel intercalated with chitosan, a {\textquoteleft}green{\textquoteright}{\textquoteright} precursor for the synthesis of intrinsic N-doped Fe entrenched (CHI-TMA-Fe-CW) and Fe distributed mesoporous graphitic carbon structures (CHI-TMA-Fe-CW-M1) with appreciable Oxygen Reduction Reaction (ORR) activity in alkaline medium. Modulation of the synthetic protocol as a function of reaction kinetics and gelation time while maintaining identical pyrolysis conditions (900 degrees C, flowing N-2 atmosphere) improves the microstructure, surface area and Fe distribution of the graphitic structures (CHI-TMA-Fe-CW-M1). CHI-TMA-Fe-CW has a Fe entrenched graphitic nanocapsule like morphology while Fe distributed mesoporous graphitic carbon sheets, with a specific surface area value of 565 m(2) g(-1) obtained by modulating the synthesis chemistry in CHI-TMA-Fe-CW-M1. The higher percentage of graphitic N in CHI-TMA-Fe-CW-M1 apparent from the XPS data validate that the modified synthetic method favours creation of more graphitic N sites contributing for better catalytic performance. CHI-TMA-Fe-CW-M1 catalyst exhibited comparable electrocatalytic activity with that of the commercially available Pt/C via an efficient four-electron-dominant ORR pathway with a positive onset potential value of 0.925 V vs RHE. Good durability of CHI-TMA-Fe-CW-M1 after 5000 cycles further confirm the prospects of MOG-chitosan and the feasibility to be used as a potential catalyst for ORR.

}, keywords = {electrocatalyst, fuel cell, Metal-Organic-Gel, oxygen reduction reaction}, issn = {2365-6549}, doi = {10.1002/slct.201701416}, author = {Shijina, Kottarathil and Illathvalappil, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Yamaguchi, Takeo and Anilkumar, Gopinathan M. and Hareesh, U. S. and Sailaja, G. S.} } @article {43929, title = {Convenient new and efficient commercial synthetic route for dasatinib (sprycel{\textregistered})}, journal = {Synthetic Communications}, volume = {47}, year = {2017}, month = {JUN}, pages = {1610-1621}, type = {Article}, abstract = {A new and efficient synthetic route for dual Src/Abl kinase inhibitor Dasatinib (Sprycel{\textregistered}), an anticancer drug, is described. This commercially viable process yields Dasatinib monohydrate free of potential impurities with consistent yield of 68\% in route A and 61\% in route B with HPLC purity >99.80\% over 4 stages.}, doi = {10.1080/00397911.2017.1337150}, author = {Suresh, Garbapu and Nadh, Ratnakaram Venkata and Srinivasu, Navuluri and Yennity, Durgaprasad} } @article {44088, title = {Dendrimeric amide- and carbamate-linked lysine-based efficient molecular transporters}, journal = {Organic \& Biomolecular Chemistry}, volume = {15}, year = {2017}, month = {DEC}, pages = {9579-9584}, type = {Article}, abstract = {

Amide- and carbamate-linked dendrimeric oligomers are reported as molecular transporters. They effectively complex with pDNA and transport it into cells at an efficiency superior to Lipofectamine, when complexation is carried out by incubation overnight. The carbamate-linked K2C is superior to amide-linked K2A; their pDNA complexes have very low associated cytotoxicity.

}, doi = {10.1039/c7ob02552a}, author = {Yadav, Amit Kumar and Dey, Namit and Chattopadhyay, Sabyasachi and Ganguli, Munia and Fernandes, Moneesha} } @article {44152, title = {Direct production of furfural in one-pot fashion from raw biomass using bronsted acidic ionic liquids}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {OCT}, pages = {Article Number: 13508}, type = {Article}, abstract = {The conversion of raw biomass into C5-sugars and furfural was demonstrated with the one-pot method using Bronsted acidic ionic liquids (BAILs) without any mineral acids or metal halides. Various BAILs were synthesized and characterized using NMR, FT-IR, TGA, and CHNS microanalysis and were used as the catalyst for raw biomass conversion. The remarkably high yield (i.e. 88\%) of C5 sugars from bagasse can be obtained using 1-methyl-3(3-sulfopropyl)-imidazolium hydrogen sulfate ([C3SO3HMIM][HSO4]) BAIL catalyst in a water medium. Similarly, the [C3SO3HMIM][HSO4] BAIL also converts the bagasse into furfural with very high yield (73\%) in one-pot method using a water/toluene biphasic solvent system.}, doi = {10.1038/s41598-017-13946-4}, author = {Matsagar, Babasaheb M. and Hossain, Shahriar A. and Islam, Tofazzal and Alamri, Hatem R. and Alothman, Zeid A. and Yamauchi, Yusuke and Dhepe, Paresh L. and Wu, Kevin C. W.} } @article {44005, title = {Elucidation of molecular mechanism of stability of the heme-regulated eIF2α kinase upon binding of its ligand, hemin in its catalytic kinase domain}, journal = {Journal of Biomolecular Structure and Dynamics }, volume = {35}, year = {2017}, month = {SEP}, pages = {1-17}, type = {Journal Article}, abstract = {The eIF2α kinase activity of the heme-regulated inhibitor (HRI) is regulated by heme which makes it a unique member of the family of eIF2α kinases. Since heme concentrations create an equilibrium for the kinase to be active/inactive, it becomes important to study the heme binding effects upon the kinase and understanding its mechanism of functionality. In the present study, we report the thermostability achieved by the catalytic kinase domain of HRI (HRI.CKD) upon ligand (heme) binding. Our CD data demonstrates that the HRI.CKD retains its secondary structure at higher temperatures when it is in ligand bound state. HRI.CKD when incubated with hemin loses its monomeric state and attains a higher order oligomeric form resulting in its stability. The HRI.CKD fails to refold into its native conformation upon mutation of H377A/H381A, thereby confirming the necessity of these His residues for correct folding, stability, and activity of the kinase. Though our in silico study demonstrated these His being the ligand binding sites in the kinase insert region, the spectra-based study did not show significant difference in heme affinity for the wild type and His mutant HRI.CKD.}, keywords = {Heme Regulated Inhibitor (HRI), HRI-eIF2α Complex, Protein{\textendash}Ligand Modeling, Thermostability}, doi = {10.1080/07391102.2017.1368417}, author = {Bhavnani, V.}, editor = {Kaviraj, S.} } @article {45706, title = {Exploiting phosphate-starved cells of scenedesmus SP for the treatment of raw sewage}, journal = {Indian Journal of Microbiology}, volume = {57}, year = {2017}, month = {JUN}, pages = {241-249}, type = {Article}, abstract = {

Phosphate depletion is one of the favorable ways to enhance the sewage water treatment with the algae, however, detailed information is essential with respect to internal phosphate concentration and physiology of the algae. The growth rate of the phosphate-starved Scenedesmus cells was reduced drastically after 48 h. Indicating cells entered in the stationary phase of the growth cycle. Fourier Transform Infrared analysis of phosphate-starved Scenedesmus cells showed the reduction in internal phosphate concentration and an increase in carbohydrate/phosphate and carbohydrate/lipid ratio. The phosphate-starved Scenedesmus cells, with an initial cell density of, 1 x 10(6) cells mL(-1) shows 87\% phosphate and 100 \% nitrogen removal in 24 h. The normal Scenedesmus cells need approximately 48 h to trim down the nutrients from wastewater up to this extent. Other microalgae, Ankistrodesmus, growth pattern was not affected due to phosphate starvation. The cells of Ankistrodesmus was able to reduce 71\% phosphate and 73\% nitrogen within 24 h, with an initial cell density of, 1 x 10(6) cells mL(-1).

}, keywords = {Ankistrodesmus, Fourier Transform Infrared, Phosphate starvation, Scenedesmus, Sewage treatment}, issn = {0046-8991}, doi = {10.1007/s12088-016-0626-0}, author = {Yewalkar-Kulkarni, Swati and Gera, Gayatri and Nene, Sanjay and Pandare, Kiran and Kulkarni, Bhaskar and Kamble, Sanjay} } @article {43896, title = {Genetic variability in Indian populations of banana corm weevil [Cosmopolites sordidus (Coleoptera: Curculionidae)] assessed by RAPDs and AFLPs}, journal = {International Journal of Tropical Insect Science}, volume = {37}, year = {2017}, month = {SEP}, chapter = {149-162}, abstract = {

Cosmopolites sordidus (Germar), commonly known as banana corm weevil, is an important economic pest in Asia that can cause severe yield loss depending upon the stage at which infestation occurs. In spite of its economic importance, little is known about the population structure of this pest in India. Random amplified polymorphic DNA (RAPD) and amplified fragment length polymorphism (AFLP) were used to characterize the population genetic structure of C. sordidus collected from five hot spot locations in India. Nineteen RAPD primers and five selective AFLP primer combinations generated 147 and 304 amplification products, respectively. UPGMA dendrograms generated with both marker systems failed to reveal populations clustered based on geographic distance, which was confirmed by the Mantel test, which did not show a strong correlation between genetic distance and geographic distance. Values of indices of genetic identity showed that the populations were closely related. Though the gene flow estimate (Nm) between the populations was 0.469, suggesting restricted gene flow, the populations are not genetically distinct. These observations suggest that the range expansion of this banana pest in India has taken place through transport of infested corms and plant material, resulting in genetically close populations that are geographically distinct. These results provide important information on the population structure of this pest in India, which will aid in designing suitable strategies for its control and management, especially with respect to insecticide resistance.

}, keywords = {Aflps, Arbitrary Primers, Bemisia-tabaci, Cosmopolites Sordidus, diversity, Genetic diversity, Germar Coleoptera, insecticide resistance, Markers, Musa Spp., Pcr, Rapds, Restricted Gene Flow Natural-populations, Scirpophaga-incertulas}, doi = {10.1017/S1742758417000108}, author = {Yadav, Sweta Kumari U. and Singh, Jyotsna and Padmanaban, B. and Kumar, Lalitha Sunil} } @article {45682, title = {Genomic and functional characterization of coleopteran insect-specific alpha-amylase inhibitor gene from amaranthus species}, journal = {Plant Molecular Biology}, volume = { 94 }, year = {2017}, month = {JUN}, pages = {319-332}, type = {Article}, abstract = {The smallest 32 amino acid alpha-amylase inhibitor from Amaranthus hypochondriacus (AAI) is reported. The complete gene of pre-protein (AhAI) encoding a 26 amino acid (aa) signal peptide followed by the 43 aa region and the previously identified 32 aa peptide was cloned successfully. Three cysteine residues and one disulfide bond conserved within known alpha-amylase inhibitors were present in AhAI. Identical genomic and open reading frame was found to be present in close relatives of A. hypochondriacus namely Amaranthus paniculatus, Achyranthes aspera and Celosia argentea. Interestingly, the 3{\textquoteright}UTR of AhAI varied in these species. The highest expression of AhAI was observed in A. hypochondriacus inflorescence; however, it was not detected in the seed. We hypothesized that the inhibitor expressed in leaves and inflorescence might be transported to the seeds. Sub-cellular localization studies clearly indicated the involvement of AhAI signal peptide in extracellular secretion. Full length rAhAI showed differential inhibition against alpha-amylases from human, insects, fungi and bacteria. Particularly, alpha-amylases from Helicoverpa armigera (Lepidoptera) were not inhibited by AhAI while Tribolium castaneum and Callosobruchus chinensis (Coleoptera) alpha-amylases were completely inhibited. Molecular docking of AhAI revealed tighter interactions with active site residues of T. castaneum alpha-amylase compared to C. chinensis alpha-amylase, which could be the rationale behind the disparity in their IC50. Normal growth, development and adult emergence of C. chinensis were hampered after feeding on rAhAI. Altogether, the ability of AhAI to affect the growth of C. chinensis demonstrated its potential as an efficient bio-control agent, especially against stored grain pests.}, doi = {10.1007/s11103-017-0609-5}, author = {Bhide, Amey J. and Channale, Sonal M. and Yadav, Yashpal and Bhattacharjee, Kabita and Pawar, Pankaj K. and Maheshwari, V. L. and Gupta, Vidya S. and Ramasamy, Sureshkumar and Giri, Ashok P.} } @article {44036, title = {Isobaric vapor-liquid equilibrium data for the binary systems of dimethyl carbonate with xylene isomers at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {62}, year = {2017}, month = {AUG}, pages = {2436-2442}, type = {Journal Article}, abstract = {Isobaric binary vapor-liquid equilibrium (VLE) data for dimethyl carbonate with xylene isomers (p-xylene, m-xylene, o-xylene, and ethylbenzene) were measured at the local atmospheric pressure of 93.13 kPa by using a dynamic recirculation still. The experimental VLE data were tested and found to be thermodynamically consistent by Herington and Van Ness consistency test. The experimental VLE data were correlated using the Wilson, NRTL, and UNIQUAC activity coefficient models and binary interactions parameters were estimated using a suitable objective function. The absolute mean deviation between the experimental and the model predicted values of vapor phase composition and total pressure was well within acceptable limits. No azeotrope was observed in any of the binary pairs and appeared to be easy for separation using conventional distillation method. }, keywords = {Atmospheric Pressure, binary mixture, Distillation, Xylene}, doi = {10.1021/acs.jced.7b00372}, author = {Yadav, S.S.}, editor = {Mali, N. A.} } @article {45748, title = {Molecular features of bile salt hydrolases and relevance in human health}, journal = {Biochimica et Biophysica Acta - General Subjects}, volume = {1861}, year = {2017}, month = {JAN}, pages = {2981-2991}, type = {Article}, abstract = {Background: Bile salt hydrolase (BSH) enzyme is responsible for the de-conjugation of bile salts by commensal bacteria, thus playing a vital role in their colonization and survival in the mammalian intestine and determination of their probiotic potential. Further, bile deconjugation also leads to lowering of cholesterol and alterations in energy homeostasis, thus making BSH a clinically important enzyme. Scope of the review: Many recent observations have indicated that BSH may be involved in a multifaceted array of roles, directly or indirectly in the host and microbial physiology. BSH paralogues have now been found to occur in different microbes including free-living and pathogenic bacteria and Archaea. BSHs from various sources also show differential activity and substrate spectrum. Certain bacteria are known to possess multiple genes for BSH enzymes. BSHs have been reported to influence different metabolic phenomena, including bacterial pathogenesis and the maintenance of lipid and glucose homeostasis in the host. These observations necessitate an intense study into the biochemical, structural and regulatory features of BSH enzymes to better understand their role in regulating bacterial and host metabolism. Major conclusions: In this review, the available information on the characteristics of BSH enzymes have been organized in order to understand their interactions with a wide range of substrates and their myriad physiological roles, from bile resistance to signalling mechanisms. General significance: A detailed exploration of BSH architecture and regulation could provide insights into its evolution and a deeper appreciation of the multiple functions of this enzyme relevant to healthcare.}, doi = {10.1016/j.bbagen.2016.09.024}, author = {Chand, D. and Avinash, V. S. and Yadav, Y. and Pundle, A. V. and Suresh, C. G. and Ramasamy, S.} } @article {43954, title = {Multicolour and nearly white light emission in YP0.8V0.2O4:Sm3+ nanorods: controlled energy transfer}, journal = {Journal of Alloys and Compounds}, volume = {726}, year = {2017}, month = {DEC}, pages = {1161-1167}, type = {Journal Article}, abstract = {Nanorods of YP0.8V0.2O4:Sm{\textthreesuperior}$^{+}$ have been synthesized under hydrothermal conditions. Substitution of vanadium (V$^{5}$$^{+}$) sites in YVO4 by phosphorus ions (P$^{5}$$^{+}$) has been confirmed by Fourier transform infrared spectroscopy, X-ray diffraction and transmission electron microscopy. Careful selection of Sm{\textthreesuperior}$^{+}$ concentration in YP0.8V0.2O4 enables to achieve the controlled energy transfer from the VO4{\textthreesuperior}$^{-}$ absorption to the excited states of Sm{\textthreesuperior}$^{+}$ ions. The controlled energy transfer has been confirmed from the steady state luminescence and decay lifetime studies of VO4{\textthreesuperior}$^{-}$ emission. With the controlled retention of VO4{\textthreesuperior}$^{-}$ emission, tuning of light emission from the singly (Sm{\textthreesuperior}$^{+}$) doped YP0.8V0.2O4 nanorods is realized. At a particular doping concentration of Sm{\textthreesuperior}$^{+}$ (1.25 at.\%), a nearly white light emission is observed. The quantum yield of this nearly white light emission is found to be \~{}28\%. Tunability of the light and white light emission are supported by CIE chromaticity. The energy transfer efficiency from the VO4{\textthreesuperior}$^{-}$ absorption to the excited states of Sm{\textthreesuperior}$^{+}$ ion in YP0.8V0.2O4 reaches upto \~{}86\% with the doping concentration of 2.25 at.\%. }, keywords = {Energy Transfer, Luminescence, Multicolor, Nanorod}, doi = {10.1016/j.jallcom.2017.08.099}, author = {Singh, N.S.}, editor = {Wangkhem, R.} } @article {43688, title = {Optical antenna effect on SiNWs/CuS photodiodes}, journal = {Physica Status Solidi A-Applications and Materials Science}, volume = {214}, year = {2017}, month = {MAY}, pages = {Article Number: 1600635}, type = {Article}, abstract = {One-dimensional architectures between silicon nanowires (SiNWs) and CuS were fabricated by radio-frequency (RF) magnetron sputtering and analyzed for solid-state photodetector application. Inspired by the subwavelength optical concentration by the surface plasmons on metal nanostructures at the nanoscale, we investigated the effect of gold nanorods (AuNRs) on the optical absorption and photodetection properties of the heterojunction photodiode. AuNRs acting as an optical trapping antenna enhances the light absorption, consequently boosting the photocurrent from the device. A maximum photoresponsivity of 0.36 mA W-1 was achieved under 665 nm excitation wavelength independent of the bias, a value similar to 13 times higher than for the heterojunction photodiode without AuNRs. Such plasmonic sensitization can be useful for improving the sensitivity of visible as well as IR photodetectors. (C) 2017 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim}, doi = {10.1002/pssa.201600635}, author = {Yenchalwar, Sandeep G. and Rondiya, Sachin R. and Shinde, Pravin N. and Jadkar, Sandesh R. and Shelke, M. V.} } @article {43798, title = {Organocatalytic enantioselective vinylogous michael-aidoi cascade for the synthesis of spirocyclic compounds}, journal = {Organic Letters}, volume = {19}, year = {2017}, month = {AUG}, pages = {4367-4370}, type = {Article}, abstract = {Enantioselective synthesis of pyrazolone-fused spirocyclohexenols by the secondary amine-catalyzed cascade reaction of alpha,beta-unsaturated aldehydes with alpha-arylidene pyrazolinones is reported. This formal [3 + 3] organocascade reaction proceeds through a vinylogous Michael-aldol sequence to furnish the spiroheterocycles with three stereocenters including an all-carbon quaternary center in good yields and selectivities. The catalytic generation of alpha,beta-unsaturated iminium ions from enals and tandem dienolate/enolate formation from pyrazolinones are the key for the success of this spiroannulation reaction.}, doi = {10.1021/acs.orglett.7b02085}, author = {Mondal, Santigopal and Mukherjee, Subrata and Yetra, Santhivardhana Reddy and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article {45673, title = {Plant cholesterol biosynthetic pathway overlaps with phytosterol metabolism}, journal = {Nature Plants}, volume = {3}, year = {2017}, month = {JAN}, type = {Article}, abstract = {The amount of cholesterol made by many plants is not negligible. Whereas cholesterogenesis in animals was elucidated decades ago, the plant pathway has remained enigmatic. Among other roles, cholesterol is a key precursor for thousands of bioactive plant metabolites, including the well-known Solanum steroidal glycoalkaloids. Integrating tomato transcript and protein co-expression data revealed candidate genes putatively associated with cholesterol biosynthesis. A combination of functional assays including gene silencing, examination of recombinant enzyme activity and yeast mutant complementation suggests the cholesterol pathway comprises 12 enzymes acting in 10 steps. It appears that half of the cholesterogenesis-specific enzymes evolved through gene duplication and divergence from phytosterol biosynthetic enzymes, whereas others act reciprocally in both cholesterol and phytosterol metabolism. Our findings provide a unique example of nature{\textquoteright}s capacity to exploit existing protein folds and catalytic machineries from primary metabolism to assemble a new, multi-step metabolic pathway. Finally, the engineering of a {\textquoteright}high-cholesterol{\textquoteright} model plant underscores the future value of our gene toolbox to produce high-value steroidal compounds via synthetic biology.}, doi = {10.1038/nplants.2016.205}, author = {Sonawane, P. D. and Pollier, J. and Panda, S. and Szymanski, J. and Massalha, H. and Yona, M. and Unger, T. and Malitsky, S. and Arendt, P. and Pauwels, L. and Almekias-Siegl, E. and Rogachev, I. and Meir, S. and Cardenas, P.D. and Masri, A. and Petrikov, M. and Schaller, H. and Schaffer, A. A. and Kamble, A. and Giri, A. P. and Goossens, A. and Aharoni, A.} } @article {43258, title = {Superoxide generation and its involvement in the growth of mycobacterium smegmatis}, journal = {Frontiers in Microbiology}, volume = {8}, year = {2017}, month = {JAN}, pages = {Article Number: 105}, abstract = {

Superoxide generation is inevitable in aerobic organisms, most of which have developed mechanisms to detoxify superoxides. However, its significance has not been clearly understood in mycobacteria. This study demonstrates that NADH oxidase is the major source of superoxide in Mycobacterium smegmatis and elucidates the involvement of superoxide in M. smegmatis growth. The maximum inhibition of superoxide generation was observed in the presence of diphenyleneiodonium chloride (DPI), an NADH oxidase inhibitor, compared to other standard inhibitors. After incubation for 24 h, the number of colony forming units (CFUs) was reduced by 6.8 log10 compared to the untreated culture. The inhibitory effect of DPI on M. smegmatis was reversed when the same culture was supplemented with menadione and pyrogallol, which are superoxide generators. Thus, this study reports the source of superoxide generation and its involvement in the growth of M. smegmatis.

}, doi = {10.3389/fmicb.2017.00105}, author = {Yeware, Amar M. and Shurpali, Ketaki D. and Athalye, Meghana C. and Sarkar, Dhiman} } @article {45733, title = {Unified approach to fused and spirocyclic oxindoles through lewis-acid-promoted opening of spiroepoxyoxindoles with allylsilanes: application to the formal synthesis of (+/-)-physovenine}, journal = {European Journal of Organic Chemistry}, year = {2017}, month = {MAY }, pages = {2603-2609}, type = {Article}, abstract = {

A protocol for the construction of oxindoles containing all-carbon quaternary centres in a highly regioselective manner has been developed. The reaction involves opening of spiroepoxyoxindoles with allylsilanes to give Hosomi-Sakurai-type products as well as new silicon-containing spirocyclic oxindoles. A formal synthesis of (+/-)-physovenine was accomplished in five steps using this protocol.

}, keywords = {alkaloids, Allylation, annulation, Lewis acids, spiro compounds}, issn = {1434-193X}, doi = {10.1002/ejoc.201700259}, author = {Sharma, Brijesh M. and Yadav, Mahesh and Gonnade, Rajesh G. and Kumar, Pradeep} } @article {43866, title = {Unprecedented solvent induced inter-conversion between monomeric and dimeric silylene-zinc iodide adducts}, journal = {Dalton Transaction }, volume = {46}, year = {2017}, month = {SEP}, chapter = {11418-11424}, abstract = {

Usually, when a silylene reacts with a transition metal Lewis acid, it forms an adduct which could be either monomeric or dimeric. However, we present here that a silylene, [PhC(NtBu)(2)SiN(SiMe3)(2)] can form both monomeric [PhC(NtBu)(2)Si{N(SiMe3)(2)} -\> ZnI2]center dot THF (1) and dimeric [{PhC(NtBu)(2)}(N(SiMe3)(2))SiZnI,(mu-I)](2) (2) adducts upon reaction with ZnI2. The formation of 1 and 2 relies upon the solvent used for the reaction or crystallization. When the crystallization is carried out in THF complex 1 is formed, however, when the reaction and crystallization are performed in acetonitrile complex 2 is obtained. Both 1 and 2 were structurally authenticated and the nature of the Si-Zn bond in these complexes was determined by quantum chemical calculations. In addition, a spontaneous inter-conversion between 1 and 2 just by changing the solvents has been also observed; a feature presently not known for silylene-transition metal Lewis adducts.

}, keywords = {Bis(Silylene ), Carbene Complexes, Crystal -structure Determination, Dative bond, Lewis acid base reaction, Ligands, Main- group compounds, Reactivity, Silicon(II) Bis(Trimethylsilyl)Amide; Carbonyl-Complexes}, issn = {1477-9226}, doi = {10.1039/c7dt01823a}, author = {Yadav, Sandeep and Sangtani, Ekta and Dhawan, Diksha and Gonnade, Rajesh G. and Ghosh, Debashree and Sen, Sakya S.} } @article {44407, title = {Vapor-liquid equilibrium data for binary mixtures of dimethyl carbonate with methyl acetate, ethyl acetate, n-propyl acetate, isopropyl acetate, n-butyl acetate, and isoamyl acetate at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {62}, year = {2017}, month = {DEC}, pages = {4356-4363}, abstract = {Isobaric vapor-liquid equilibrium (VLE) data was measured at the local atmospheric pressure of 93.13 kPa for the binary systems of dimethyl carbonate (DMC) with methyl acetate, ethyl acetate, n-propyl acetate, isopropyl acetate, n-butyl acetate, and isoamyl acetate using a dynamic recirculation still. VLE data was generated in the form of T-x,y and was checked for thermodynamic consistency using the Herington area test, Van Ness test, and mean absolute deviation between experimental and calculated total pressure and vapor phase composition. Data for all pairs meet the criteria for thermodynamic consistency and were found suitable for process modeling. Binary interaction parameters for the Wilson, nonrandom two-liquid (NRTL), and universal quasichemical (UNIQUAC) activity coefficient models were determined using the objective function of minimizing the deviation between the experimental and the calculated vapor phase composition and total pressure. For all binary systems, Wilson, NRTL, and UNIQUAC models gave good predictions. Azeotropic behavior was observed for the isopropyl acetate-DMC pair at 357.8 K and 0.6 mole fraction of isopropyl acetate.}, doi = {10.1021/acs.jced.7b00704}, author = {Mali, Nilesh A. and Yadav, Satyajeet S. and Ghuge, Pravin D. and Joshi, Sunil. S.} } @article {45350, title = {Alkaline earth metal compounds of methylpyridinato beta-diketiminate ligands and their catalytic application in hydroboration of aldehydes and ketones}, journal = {Organometallics }, volume = { 37}, year = {2018}, month = {DEC}, pages = {4576-4584}, type = {Article }, abstract = {

Ever increasing demand for green and sustainable chemical processes has set up a drive to replace transition metals with earth-abundant, nontoxic, and environmentally benign alternatives. In this regard, the alkaline earth metal complexes have attracted significant attention. Herein, we have used a beta-diketiminato ligand with methyl-pyridine side arm to synthesize magnesium (1) and calcium (2) compounds. The constitutions of 1 and 2 have been confirmed by single crystal X-ray studies, which show that the magnesium and calcium atom in 1 and 2 possesses octahedral geometry. Subsequently, we have used them as catalysts (1 mol \%) for hydroboration of a wide range of aldehydes using pinacolborane (HBpin) at room temperature. The strategy has further been extended to ketones with 2 mol \% catalyst loading. DFT calculations have been performed to understand the mechanism.

}, issn = {0276-7333}, doi = {10.1021/acs.organomet.8b00568}, author = {Yadav, Sandeep and Dixit, Ruchi and Bisai, Milan Kumar and Vanka, Kumar and Sen, Sakya S.} } @article {44419, title = {Aluminium oxide supported on SBA15 molecular sieves as potential lewis acid catalysts for epoxidering opening using aniline}, journal = {Catalysis Letters}, volume = {148}, year = {2018}, month = {MAY}, pages = {1407-1415}, abstract = {A series of aluminium oxide (Al2O3)-supported SBA-15 molecular sieves were prepared using a one-step wet-impregnation method. Powder X-ray diffraction, nitrogen adsorption/desorption, infrared spectroscopy and ammonia TPD were used to investigate the structures and chemical natures of the surface-bound species. The FT-IR studies of metal-impregnated SBA-15 materials revealed strong covalent interaction of Al2O3 on SBA-15 materials with strong Lewis acidic properties, evident from ammonia-TPD studies. The metal oxide-supported SBA-15 catalysts are active for epoxide ring opening with aniline at room temperature, and showed remarkably high stability and selectivity towards mono-alkylated products (about 86\%) viz., 1-(phenylamino)propan-2-ol and 2-(phenylamino)propan-1-ol. The catalytic activities remained intact after several recycles. The observed activities and selectivities were compared with other metal oxide-loaded SBA-15 catalysts obtained by similar preparation methods. Aluminium oxide supported SBA-15 molecular sieves were prepared using a one-step wet-impregnation method. The materials showed strong Lewis acidic sites and promising catalytic activity for epoxide ring opening with aniline at room temperature. }, doi = {10.1007/s10562-018-2366-8}, author = {Yadav, Rekha and Muralidhar, Akhila and Shamna, A. and Aghila, P. and Gurrala, Lakshmiprasad and Sakthivel, Ayyamperumal} } @article {44424, title = {Antibacterial and anti-TB tat-peptidomimetics with improved efficacy and half-life}, journal = {European Journal of Medicinal Chemistry}, volume = {152}, year = {2018}, month = {MAY}, pages = {358-369}, abstract = {Non-natural antimicrobial peptides are ideal as next-generation antibiotics because of their ability to circumvent the problems of drug resistance and in vivo instability. We report novel all-alpha- and alpha,gamma-mixed Tat peptide analogues as potential antibacterial and anti-TB agents. These peptides have broad spectrum antibacterial activities against Gram-positive (MICs 0.61 +/- 0.03 to 1.35 +/- 0.21 mu M with the peptide gamma TatM4) and Gram-negative (MICs 0.71 +/- 0.005 to 1.26 +/- 0.02 M with gamma TatM4) bacteria and are also effective against active and dormant forms of Mycobacterium tuberculosis, including strains that are resistant to rifampicin and isoniazid. The introduction of the non-natural amino acids of the study in the Tat peptide analogues results in increased resistance to degradation by proteolysis, significantly increasing their half-life. The peptides appear to inhibit bacteria by a membrane disruption mechanism, and have only a low cytotoxic effect on mammalian cells. (C) 2018 Elsevier Masson SAS. All rights reserved.}, doi = {10.1016/j.ejmech.2018.04.039}, author = {Bhosle, Govind S. and Nawale, Laxman and Yeware, Amar M. and Sarkar, Dhiman and Fernandes, Moneesha} } @article {44204, title = {Beyond hydrofunctionalisation: a well-defined calcium compound catalysed mild and efficient carbonyl cyanosilylation}, journal = {Chemistry-A European Journal}, volume = {24}, year = {2018}, month = {JAN}, pages = {1269-1273}, type = {Article}, abstract = {

Organocalcium compounds have been reported as efficient catalysts for various transformations, for cases in which one of the substrates contained an E-H (E=B, N, Si, P) bond. Here, we look at the possibility of employing an organocalcium compound for a transformation in which none of the precursors has a polar E-H bond. This study demonstrates the utilization of a well-defined amidinatocalcium iodide, [PhC(NiPr)(2)CaI] (1) for cyanosilylation of a variety of aldehydes and ketones with Me3SiCN under ambient conditions without the need of any co-catalyst. The reaction mechanism involves a weak adduct formation between 1 and Me3SiCN leading to the activation of the Si-C bond, which subsequently undergoes sigma-bond metathesis with a C=O moiety. Such a mechanistic pathway is unprecedented in alkaline earth metal chemistry. Experimental and computational studies support the mechanism.

}, keywords = {Ca catalysis, carbonyls, cyanosilylation, Density functional calculations, transition-metal free}, issn = {0947-6539}, doi = {10.1002/chem.201705795}, author = {Yadav, Sandeep and Dixit, Ruchi and Vanka, Kumar and Sen, Sakya S.} } @article {44335, title = {Effect of titration time on the catalytic performance of Cu/CeO2 catalysts for water-gas shift reaction}, journal = {Catalysis Today}, volume = {309}, year = {2018}, month = {JUL}, pages = {83-88}, type = {Article}, abstract = {We herein report the preparation of ceria (CeO2) via a simple precipitation method for use as a catalyst support in the water-gas shift (WGS) reaction. More specifically, we optimized the titration time required to obtain highly active CeO2-supported catalysts for the WGS reaction. As such, Cu was employed as the active metal coupled with the CeO2 support. Notably, the CeO2-0 supported Cu catalyst (where the precipitant was immediately injected into a cerium nitrate solution) exhibited the highest CO conversion at a gas hourly space velocity of 36,050 h(-1). This high catalytic activity of the Cu/CeO2-0 catalyst was mainly due to its high Brunauer-Emmett-Teller (BET) surface area, enhanced Cu dispersion, high number of oxygen vacancies, and enhanced reducibility.}, issn = {09205861}, doi = {10.1016/j.cattod.2017.10.007}, author = {Na, Hyun-Suk and Shim, Jae-Oh and Jang, Won-Jun and Jeon, Kyung-Won and Kim, Hak-Min and Lee, Yeol-Lim and Lee, Da-We and Yoo, Seong-Yeun and Bae, Jong Wook and Rode, Chandrashekhar V. and Roh, Hyun-Seog} } @article {44221, title = {Epoxyazadiradione suppresses breast tumor growth through mitochondrial depolarization and caspase-dependent apoptosis by targeting PI3K/Akt pathway}, journal = {BMC Cancer}, volume = {18}, year = {2018}, month = {JAN}, pages = {52}, type = {Article}, abstract = {

Background: Breast cancer is one of the most commonly diagnosed invasive cancers among women around the world. Among several subtypes, triple negative breast cancer (TNBC) is highly aggressive and chemoresistant. Treatment of TNBC patients has been challenging due to heterogeneity and devoid of well-defined molecular targets. Thus, identification of novel effective and selective agents against TNBC is essential. Methods: We used epoxyazadiradione to assess the cell viability, mitochondrial potential, ROS level, cell migration, apoptosis and protein expression in cell culture models of TNBC MDA-MB-231 and ER+MCF-7 breast cancer cells. The molecular mechanism was examined in two different type of breast cancer cells in response to epoxyazadiradione. We have also analyzed the effect of epoxyazadiradione on breast tumor growth using in vivo mice model. Results: In this study, we for the first time investigated that out of 10 major limonoids isolated from Azadirachta indica, epoxyazadiradione exhibits most potent anti-cancer activity in both TNBC and ER+breast cancer cells. Epoxyazadiradione induces apoptosis and inhibits PI3K/Akt-mediated mitochondrial potential, cell viability, migration and angiogenesis. It also inhibits the expression of pro-angiogenic and pro-metastatic genes such as Cox2, OPN, VEGF and MMP-9 in these cells. Furthermore, epoxyazadiradione attenuates PI3K/Akt- mediated AP-1 activation. Our in vivo data revealed that epoxyazadiradione suppresses breast tumor growth and angiogenesis in orthotopic NOD/SCID mice model. Conclusion: Our findings demonstrate that epoxyazadiradione inhibits PI3K/Akt-dependent mitochondrial depolarisation, induces apoptosis and attenuates cell migration, angiogenesis and breast tumor growth suggesting that this compound may act as a potent therapeutic agent for the management of breast cancer.

}, keywords = {Angiogenesis, Apoptosis, Breast cancer, Limonoids, Metastasis, PI3K}, issn = {1471-2407}, doi = {10.1186/s12885-017-3876-2}, author = {Kumar, Dhiraj and Haldar, Saikat and Gorain, Mahadeo and Kumar, Santosh and Mulani, Fayaj A. and Yadav, Amit S. and Miele, Lucio and Thulasiram, Hirekodathakallu V. and Kundu, Gopal C.} } @article {44481, title = {G-C3N4/NiAl-LDH 2D/2D hybrid heterojunction for high-performance photocatalytic reduction ofco2 into renewable fuels}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {JAN}, pages = {2667-2678}, type = {Article }, abstract = {2D/2D interface heterostructures of g-C3N4 and NiAl-LDH are synthesized utilizing strong electrostatic interactions between positively charged 2D NiAl-LDH sheets and negatively charged 2D g-C3N4 nanosheets. This new 2D/2D interface heterojunction showed remarkable performance for photocatalytic CO, reduction to produce renewable fuels such as CO and H-2 under visible-light irradiation, far superior to that of either single phase g-C3N4 or NiAl-LDH nanosheets. The enhancement of photocatalytic activity could be attributed mainly to the excellent interfacial contact at the heterojunction of gC(3)N(4)/NiAl-LDH, which subsequently results in suppressed recombination, and improved transfer and separation of photogenerated charge carriers. In addition, the optimal g-C3N4/NiAl-LDH nanocomposite possessed high photostability after successive experimental runs with no obvious change in the production of CO from CO, reduction. Our findings regarding the design, fabrication and photophysical properties of 2D/2D heterostructure systems may find use in other photocatalytic applications including H-2 production and water purification.}, doi = {10.1021/acsami.7b18835}, author = {Tonda, Surendar and Kumar, Santosh and Bhardwaj, Monika and Yadav, Poonam and Ogale, Satishchandra} } @article {45447, title = { Glucose isomerization catalyzed by bone char and the selective production of 5-hydroxymethylfurfural in aqueous media}, journal = {Sustainable Energy \& Fuels}, volume = {2}, year = {2018}, month = {OCT}, pages = { 2148-2153}, type = {Article}, abstract = {The selective production of 5-hydroxymethylfurfural (HMF) is important, and it is difficult with glucose substrates in a water solvent. Here we demonstrate a selective method for glucose-to-HMF conversion using the combined catalysis of bone char and 1-methyl-3-(3-sulfopropyl)-imidazolium hydrogen sulfate acidic ionic liquid catalysts with a high HMF selectivity (54\%) in water.}, issn = {2398-4902}, doi = {10.1039/c8se00339d}, author = {Matsagar, Babasaheb M. and Van Nguyen, Chi and Hossain, Md. Shahriar A. and Islam, Md. Tofazzal and Yamauchi, Yusuke and Dhepe, Paresh L. and Wu, Kevin C. -W.} } @article {44634, title = {High surface area nanoporous carbon derived from high quality jute from Bangladesh}, journal = {Materials Chemistry and Physics}, volume = {216}, year = {2018}, month = {SEP}, pages = {491-495}, type = {Article}, abstract = {

We report an economically viable and environment-friendly strategy for the preparation of nanoporous carbon (NC) from jute which is one of the most abundant natural fibers produced in Bangladesh and some South Asian countries. Nitrogen adsorption-desorption isotherms, X-ray diffraction, Raman spectroscopy, UV spectroscopy, and scanning/transmission electron microscopy were performed to characterize the obtained NC. Three different types of jute-derived NCs have been synthesized at three different temperatures, 700 degrees C, 800 degrees C and 900 degrees C. The NC prepared at 800 degrees C resulted in a high surface area (981 m(2) g(-2)) and was associated with the retention of the original fibrous shapes. This study shows a promising future for jute as a natural precursor for NCs for a myriad of applications ranging from water purification to gas separation to energy conversion and storage.

}, keywords = {Adsorbents, Graphitization, Jute, Nanoporous carbons, porous materials}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2018.05.082}, author = {Khan, Junayet Hossain and Lin, Jianjian and Young, Christine and Matsagar, Babasaheb M. and Wu, Kevin C. W. and Dhepe, Paresh L. and Islam, Md Tofazzal and Rahman, Md Mahbubur and Shrestha, Lok Kumar and Alshehri, Saad M. and Ahamad, Tansir and Salunkhe, Rahul R. and Kumar, Nanjundan Ashok and Martin, Darren J. and Yamauchi, Yusuke and Hossain, Md Shahriar A.} } @article {44497, title = {Identification of potent chromone embedded [1,2,3]-triazoles as novel anti-tubercular agents}, journal = {Royal Society Open Science}, volume = {5}, year = {2018}, month = {APR}, pages = {Article Number: 171750}, abstract = {A series of 20 novel chromone embedded [1,2,3]-triazoles derivatives were synthesized via an easy and convenient synthetic procedure starting from 2-hydroxy acetophenone. The in vitro anti-mycobacterial evaluation studies carried out in this work reveal that seven compounds exhibit significant inhibition against Mycobacterium tuberculosis H37Rv strain with MIC in the range of 1.56-12.5 mu g ml(-1). Noticeably, compound 6s was the most potent compound in vitro with a MIC value of 1.56 mu g ml(-1). Molecular docking and chemoinformatics studies revealed that compound 6s displayed drug-like properties against the enoyl-acyl carrier protein reductase of M. tuberculosis further establishing its potential as a potent inhibitor.}, doi = {10.1098/rsos.171750}, author = {Nalla, Viswanadh and Shaikh, Aslam and Bapat, Sanket and Vyas, Renu and Karthikeyan, M. and Yogeeswari, P. and Sriram, D. and Muthukrishnan, M.} } @article {44351, title = {In situ phase transformation synthesis of unique Janus Ag2O/Ag2CO3 heterojunction photocatalyst with improved photocatalytic properties}, journal = {Applied Surface Science}, volume = {445}, year = {2018}, month = {JUL}, pages = {555-562}, type = {Article}, abstract = {Herein, Ag2O/Ag2CO3 nanocomposite with unique Janus morphology was synthesized by a facile ion-exchange followed by an in situ phase transformation method with precise control of its nucleation and growth processes. Contrary to conventional synthetic procedures of Janus architectures, the present Janus system was constructed without the need for surfactants or toxic chemicals. Most importantly, the visible-light-absorbing Janus Ag2O/Ag2CO3 nanocomposite exhibits a remarkable performance toward the degradation of Rhodamine B and 4-chlorophenol, far superior to that observed for bare Ag2CO3. The obvious enhancement of the photocatalytic performance of this nanocomposite is mainly attributed to the intimate Ag2O/Ag2CO3 interface created by its exceptional Janus architecture, which in turn allows for rapid charge transfer processes. Additionally, the Janus system exhibited a high photostability during recycling experiments with no significant change in the degradation activity. (C) 2018 Published by Elsevier B.V.}, doi = {10.1016/j.apsusc.2018.03.194}, author = {Jo, Wan-Kuen and Kumar, Santosh and Yadav, Poonam and Tonda, Surendar} } @article {45392, title = {Melamine formaldehyde-metal organic gel interpenetrating polymer network derived intrinsic Fe-N-doped porous graphitic carbon electrocatalysts for oxygen reduction reaction}, journal = {New Journal of Chemistry }, volume = {42}, year = {2018}, month = {DEC}, pages = {18690-18701}, type = {Article}, abstract = {Fe, N doped porous graphitic carbon electrocatalyst (Fe-MOG-MF-C), obtained by pyrolysis of an Interpenetrating Polymer Network (IPN) comprised of melamine formaldehyde (MF as hard segment) and Metal-Organic Gel (MOG as soft segment), exhibited significant Oxygen Reduction Reaction (ORR) activity in alkaline medium. BET surface area analysis of Fe-MOG-MF-C showed high surface area (821 m(2) g(-1)), while TEM, Raman and XPS results confirmed Fe and N co-doping. Furthermore, a modulated porous morphology with a higher degree of surface area (950 m(2) g(-1)) has been accomplished for the system (Fe-MOG-MFN-C) when aided by a sublimable porogen, such as naphthalene. XPS results further demonstrated that these systems exhibited a better degree of distribution of graphitic N and an onset potential value of 0.91 V vs. RHE in 0.1 M KOH solution following an efficient four-electron ORR pathway. The electrocatalytic activity of Fe-MOG-MFN-C is superior to that of Fe-MOG-MF-C by virtue of its higher graphitic N content and surface area. Thus, the study presents a new class of IPN derived MF-MOG nanocomposites with the potential to generate extended versions of in situ Fe-N doped porous graphitic carbon structures with superior ORR activity.}, issn = {1144-0546}, doi = {10.1039/c8nj03170c}, author = {Shijina, Kottarathil and llathvalappil, Rajith and Sumitha, N. S. and Sailaja, G. S. and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchig, Takeo and Hareesh, U. S.} } @article {45364, title = {Metamagnetism in nanosheets of Co-II-MOF with T-N at 26 K and a giant hysteretic effect at 5 K}, journal = {Inorganic Chemistry }, volume = {57}, year = {2018}, month = {DEC}, pages = {15044-15047}, type = {Article}, abstract = {Herein, we have synthesized at room-temperature two-dimensional nanosheets of a MOF comprised of cobalt(II) ion with benzenedicarboxylic acid ligand, which exhibited unusual magnetic properties. Direct-current magnetic susceptibility revealed an anti-ferromagnetic (AFM) transition at 26 K (Neel temperature, T-N) followed by a canting of the spin moments along with the concomitant appearance of a sigmoidal-shaped magnetization versus field (M-H) curve at 15 K. Such a canted AFM ordering led to nonzero remnant magnetization with a remarkably high coercive field of similar to 10 kOe at 5 K. Metamagnetism was further: substantiated by the alternating-current magnetic susceptibility measurements.}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.8b03064}, author = {Gupta, Kriti and Dadwal, Arun and Rana, Shammi and Jha, Plawan Kumar and Jain, Anil and Yusuf, S. M. and Joy, Pattayil A. and Ballav, Nirmalya} } @article {44637, title = {Morphological ensembles of N-doped porous carbon derived from ZIF-8/Fe-graphene nanocomposites: processing and electrocatalytic studies}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {AUG}, pages = {8688-8697}, abstract = {

Engineering the active site density of porous carbon catalysts for enhanced electrocatalytic activity is the current focus in the quest for economically viable fuel cells. Herein, we synthesise ZIF-8/Fe-graphene composites for the formation of N and Fe co-doped carbon with diverse morphologies ranging from tubes and sheets to frameworks of carbon. A synthetic strategy involving the one pot synthesis of ZIF-8 based composites is accomplished by the reaction of 2-methylimidazole with mixed Zn/Fe salt solution containing graphene dispersions. The high temperature heat treatment of this precursor mix yielded micro-meso porous architectures of N, Fe co-doped carbon with dispersions of Fe/Fe3C. An onset potential value of 0.95 V and a half-wave potential of 0.82 V coupled with excellent durability and stability in alkaline medium indicated improved electrocatalytic performances over its commercial Pt/C counterpart. The appreciable electrocatalytic properties of the synthesized carbon are attributed to its morphological diversity, hybrid structure, high N doping and its heteroporous characteristics. The dispersed Fe/Fe3C and FeNx sites facilitated enhanced oxygen adsorption and the graphene inclusions in the composite provided retention of high nitrogen contents.

}, keywords = {electrocatalyst, fuel cell, N- Fe co-doped carbon, oxygen reduction reaction, ZIF-8}, issn = {2365-6549}, doi = {10.1002/slct.201801419}, author = {Thomas, Minju and Illathvalappil, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {44365, title = {New insights towards strikingly improved room temperature ethanol sensing properties of p-type Ce-doped SnO2 sensors}, journal = {Scientific Reports}, volume = {8}, year = {2018}, month = {MAY}, pages = {Article Number: 8079}, type = {Article}, abstract = {In this article, room temperature ethanol sensing behavior of p-type Ce doped SnO2 nanostructures are investigated successfully. Interestingly, it is examined that the abnormal n to p-type transition behavior is caused by Ce doping in SnO2 lattice. In p-type Ce doped SnO2, Ce ion substituting the Sn is in favor of generating excess holes as oxygen vacancies, which is associated with the improved sensing performance. Although, p-type SnO2 is one of the important materials for practical applications, it is less studied as compared to n-type SnO2. Pure and Ce doped SnO2 nanostructures were successfully synthesized by chemical co-precipitation method. The structure, surface morphology, unpaired electrons (such as free radicals), and chemical composition of obtained nanoparticleswere studied by various kinds of characterization techniques. The 9\% Ce doped SnO2 sensors exhibit maximum sensor response of similar to 382 for 400 ppm of ethanol exposure with fast response time of similar to 5 to 25 sec respectively. Moreover, it is quite interesting that such enhancement of ethanol sensing is unveiled at room temperature, which plays a key role in the quest for better ethanol sensors. These remarkably improved sensing results are attributed to uniformly distributed nanoparticles, lattice strain, complex defect chemistry and presence of large number of unpaired electrons on the surface.}, doi = {10.1038/s41598-018-26504-3}, author = {Kumar, Manjeet and Bhatt, Vishwa and Abhyankar, A. C. and Kim, Joondong and Kumar, Akshay and Patil, Sagar H. and Yun, Ju-Hyung} } @article {45440, title = {Ni-Catalyzed dimerization and hydroperfluoroarylation of 1,3-dienes}, journal = {Journal of Organic Chemistry}, volume = { 83 }, year = {2018}, month = {AUG}, pages = {9267-9277}, type = {Article}, doi = {10.1021/acs.joc.8b01266}, author = {Iwasaki, Takanori and Min, Xin and Fukuoka, Asuka and Zhu, Longzhi and Qiu, Renhua and Yang, Tao and Ehara, Masahiro and Sudalai, Arumugam and Kambe, Nobuaki} } @article {44387, title = {Novel red fluorescence protein based microplate assay for drug screening against dormant mycobacterium tuberculosis by using paraffin}, journal = {Tuberculosis}, volume = {110}, year = {2018}, month = {MAY}, pages = {15-19}, abstract = {

The hypoxia model of dormancy is widely used in drug screening programs to identify novel inhibitors against latent Mycobacterium tuberculosis disease. In earlier reported microplate assays, hypoxia was maintained by either sealing the microplate or shifting in an anaerobic chamber to develop dormant phenotype. In these assays, inhibitors were added during inoculation, which mainly represents the active stage inhibitors instead of the dormant ones. Herein, the culture was covered with paraffin to develop hypoxia condition and consequently providing the advantage of adding compounds at any stage during incubation of 96-well plate. The stable expression of the red fluorescent protein in the bacilli under both actively growing as well as dormant conditions also facilitate the reliable estimation of growth and inhibition kinetics of bacilli in medium. Furthermore, S/N ratio and Z{\textquoteright} factor of this assay were found to be \> 27 and 0.91-0.94 respectively, which confirm the robustness of the protocol. This newly developed drug-screening assay offers an easy, inexpensive, safe and high throughput-screening tool to search novel antitubercular inhibitors against both active and dormant bacilli. The red fluorescent H37Ra strain is a suitable surrogate for the more virulent H37Rv strain, and thus this effort will help in combating latent tuberculosis.

}, doi = {10.1016/j.tube.2018.02.008}, author = {Yeware, Amar and Sarkar, Dhiman} } @article {45531, title = {One-pot sequential bromination and fluorination to access 3-fluoroimidazo[1,2-a]pyridines from arylketones}, journal = {European Journal Of Organic Chemistry}, volume = {2018}, year = {2018}, month = {JUL}, pages = {3432-3436}, type = {Article}, abstract = {3-Fluoro-2-arylimidazo[1,2-a]pyridines were selectively synthesised in one-pot from acetophenones and 2-aminopyridines under mild conditions. The sequence of reactions involved bromination, condensation, and late-stage fluorination. Two halogenating reagents play key roles in the process. We found that tetrabutylammonium tribromide and SelectfluorTM gave excellent yields of the desired products in the one-pot sequential reaction. {\textcopyright} 2018 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim}, isbn = {1434193X}, doi = {10.1002/ejoc.201800578}, author = {Udavant, R. N. and Yadav, A. R. and Shinde, S. S.} } @article {44552, title = {Porous reduced graphene oxide modified electrodes for the analysis of protein aggregation. Part 2: Application to the analysis of calcitonin containing pharmaceutical formulation}, journal = {Electrochimica Acta}, volume = {266}, year = {2018}, month = {MAR }, pages = {364-372}, abstract = {

In part 1 (A. Vasilescu et al., Porous reduced graphene oxide modified electrodes for the analysis of protein aggregation. Part 1: Lysozyme aggregation at pH 2 and 7.4 Electrochem. Acta, 254 (2017) 375 -383) we proposed porous reduced graphene oxide coated glassy carbon electrode (GC/prGO) in combination with differential pulse voltammetry as a new analytical tool for aggregation studies of proteins. Lysozyme was used as a model to follow its aggregation by electrochemical means at pH 2 and pH 7.4, leading to the formation of amyloid and amorphous aggregates, respectively. Part 2 of this work widens the scope of this approach by investigating a biopharmaceutical product, as the aggregation of peptide based drugs affects their therapeutic activity and can induce allergic reactions in patients. The salmon polypeptide calcitonin (sCT) was chosen as an example of a bioactive peptide with limited pharmaceutical potential due to a tendency to form cytotoxic aggregates and amyloid fibrils. For practical applications, screen printed electrodes (SPE) and flexible electrodes (FE) modified with polydiallyldimethylammonium (PDDA) and prGO by using the layer-by-layer deposition technique have been developed for the detection of sCT. The results indicate that these electrodes can differentiate between formation of amyloid aggregates of calcitonin (2 mg mL(-1)) in citrate buffer to no aggregation in acetate buffer. It was further demonstrated that these electrodes are able to analyze a pharmaceutical drug product of low potency, Miacalcic (8.3 mu g mL(-1)), where no aggregation was observed. (C) 2018 Elsevier Ltd. All rights reserved.

}, keywords = {Calcitonin, Disposable electrodes, Electrochemistry, Porous reduced graphene oxide, Protein aggregation}, issn = {0013-4686}, doi = {10.1016/j.electacta.2018.02.038}, author = {Vasilescu, Alina and Ye, Ran and Boulahneche, Samia and Lamraoui, Sabrina and Jijie, Roxana and Medjram, Mohamed Salah and Gaspar, Szilveszter and Singh, Santosh K. and Kurungot, Sreekumar and Melinte, Sorin and Boukherroub, Rabah and Szunerits, Sabine} } @article {45407, title = { Refractive index and vapor-liquid equilibrium data for the binary systems of anisole with xylene isomers at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {63}, year = {2018}, month = {SEP}, pages = {3475-3481}, type = {Article}, abstract = {Phase equilibrium behavior of binary systems of anisole with xylene isomers was analyzed experimentally. An apparatus which establishes equilibrium conditions through continuous circulation of equilibrium vapor condensate and equilibrium liquid was used. Experimental data comprising refractive indices of binary mixtures, equilibrium compositions of vapor and liquid, and equilibrium temperature are reported for all binary systems. Thermodynamic consistency of vapor-liquid equilibrium data was established for using the Herington, Van Ness and absolute mean deviation tests. Interaction parameters of activity coefficient models, Wilson, nonrandom two liquid, and universal quasichemical, which are important for accounting nonideal behavior in process modeling, are also estimated through regression of the respective binary VLE data. Although VLE data shows that binary systems are nonazeotropic in nature, a pinch in the T-x,y plot indicates that separation of all binary system using distillation may need a significant number of stages.}, doi = {10.1021/acs.jced.8b00348}, author = {Yadav, Satyajeet S. and Mali, Nilesh A. and Joshi, Sunil S.} } @article {44618, title = {Specific stereoisomeric conformations determine the drug potency of cladosporin scaffold against malarial parasite}, journal = {Journal of Medicinal Chemistry}, volume = {61}, year = {2018}, month = {JUL}, pages = {5664-5678}, abstract = {

The dependence of drug potency on diastereomeric configurations is a key facet. Using a novel general divergent synthetic route for a three-chiral center antimalarial natural product cladosporin, we built its complete library of stereoisomers (cladologs) and assessed their inhibitory potential using parasite-, enzyme-, and structure-based assays. We show that potency is manifest via tetrahyropyran ring conformations that are housed in the ribose binding pocket of parasite lysyl tRNA synthetase (KRS). Strikingly, drug potency between top and worst enantiomers varied 500-fold, and structures of KRS-cladolog complexes reveal that alterations at C3 and C10 are detrimental to drug potency whereas changes at C3 are sensed by rotameric flipping of glutamate 332. Given that scores of antimalarial and anti-infective drugs contain chiral centers, this work provides a new foundation for focusing on inhibitor stereochemistry as a facet of antimicrobial drug development.

}, issn = {0022-2623}, doi = {10.1021/acs.jmedchem.8b00565}, author = {Das, Pronay and Babbar, Palak and Malhotra, Nipun and Sharma, Manmohan and Jachak, Goraknath R. and Gonnade, Rajesh G. and Shanmugam, Dhanasekaran and Harlos, Karl and Yogavel, Manickam and Sharma, Amit and Reddy, D. Srinivasa} } @article {45543, title = {Synthesis and antitumor activity evaluation of 2-aminothiazoles appended 5-methylisoxazoline and pyridine-piperazine hybrid molecules}, journal = {Letters in Organic Chemistry}, volume = {15}, year = {2018}, month = {NOV}, pages = {1070-1077}, type = {Article}, abstract = {A highly efficient and milder protocol for the syntheses of novel series of 2-aminothiazoles bearing 5-methylisoxazoline and pyridine-piperazine hybrid molecules has been developed. The target compounds 13a-e were screened for their in vitro cytotoxicity activity against various tumor cell lines including MCF-7 (human breast adenocarcinoma), HCT-116 (colorectal carcinoma), Jurkat (human T-cell leukemia) and THP-1 (human acute monocytic leukemia). The bioactive assay showed that the most of the new compounds exhibited promising results in comparison with the parental Sunitinib. The synthesized compounds could well be used in the future as lead anticancer drugs in drug development studies. The synthesized compounds were fully characterized by IR,1 H NMR,13 C NMR, elemental analysis and mass spectral data. }, doi = {10.2174/1570178615666180430122641}, author = {Suresh, G. and Nadh, R.V. and Srinivasu, N. and Yennity, D.} } @article {44500, title = {Synthesis of novel alpha-aminophosphonate derivatives, biological evaluation as potent antiproliferative agents and molecular docking}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {MAY}, pages = {5552-5558}, type = {Journal Article}, abstract = {

A series of novel fluorine containing α-aminophosphonate derivatives (4 a{\textendash}4 q) were synthesized in excellent yield and high purity. All these novel Fluorinated α-aminophosphonate compounds were screened for antiproliferative and apoptosis activity on human non small cell lung carcinoma cells (A549) and human skin melanoma cells (SK-MEL-2). Compounds 4 a, 4 b, 4 c, 4 f, 4 i, 4 j and 4 m were found to be more active antiproliferative agent against A549 and SK-MEL-2 cells with IC50 value 0.22 to 1.25 μM. Molecular docking study related to binding affinity and binding mode analysis showed that synthesized compounds had potential to inhibit human Topoisomerase IIa enzyme system. Flow cytometric study showed some of these derivatives also induced cell apoptosis and arrest cell cycle at G1 and at G2/M phase. Overall, this study provides future perspective of lead candidate for the future anticancer drug discovery initiatives.

}, issn = {23656549}, doi = {10.1002/slct.201800798}, author = {Deshmukh, Satish U.}, editor = {Kharat, Kiran R.} } @article {44463, title = {Tripeptides derived from reactive centre loop of potato type II protease inhibitors preferentially inhibit midgut proteases of Helicoverpa armigera}, journal = {Insect Biochemistry and Molecular Biology }, volume = {95}, year = {2018}, month = {APR }, pages = {17-25}, type = {Journal Article}, abstract = {

Potato type II protease inhibitors (Pin-II PIs) impede the growth of lepidopteran insects by inhibiting serine protease-like enzymes in the larval gut. The three amino acid reactive centre loop (RCL) of these proteinaceous inhibitors is crucial for protease binding and is conserved across the Pin-II family. However, the molecular mechanism and inhibitory potential of the RCL tripeptides in isolation of the native protein has remained elusive. In this study, six peptides corresponding to the RCLs of the predominant Pin-II PIs were identified, synthesized and evaluated for in vitro and in vivo inhibitory activity against serine proteases of the polyphagous insect, Helicoverpa armigera. RCL peptides with sequences PRN, PRY and TRE were found to be potent inhibitors that adversely affected the growth and development of H. armigera. The binding mechanism and differential affinity of the RCL peptides with serine proteases was delineated by crystal structures of complexes of the RCL peptides with trypsin. Residues P1 and P2 of the inhibitors play a crucial role in the interaction and specificity of these inhibitors. Important features of RCL peptides like higher inhibition of insect proteases, enhanced efficacy at alkaline gut pH, longer retention and high stability in insect gut make them suitable molecules for the development of sustainable pest management strategies for crop protection.

}, keywords = {Helicoverpa armigera, Protease, protease inhibitor, Reactive centre loop peptides}, issn = {9651748}, doi = {10.1016/j.ibmb.2018.02.001}, author = {Saikhedkar, Nidhi S. and Joshi, Rakesh S. and Bhoite, Ashwini S. and Mohandasan, Radhika and Yadav, Amit Kumar and Giri, Ashok P.} } @article {45503, title = {Vapour{\textendash}liquid equilibrium study of binary mixtures of aniline with isopropanol, n -butanol and ethylene glycol at the local atmospheric pressure}, journal = {Indian Chemical Engineer}, year = {2018}, month = {OCT}, type = {Article}, abstract = {The present work analyses the vapour{\textendash}liquid equilibrium (VLE) behaviour of the binary systems of aniline with isopropanol, n-butanol and ethylene glycol. The isobaric VLE data have been generated at the local atmospheric pressure of 96.15 kPa for all the binary systems of aniline. A dynamic type vapour{\textendash}liquid circulating VLE still was used for generating the data. Calibration curves were generated using mole fraction and refractive index data for all pairs for composition measurement. The VLE data, generated in T-x,y form for all pairs, were found thermodynamically consistent through the Herington area test and the mean absolute deviation test. Activity coefficient models, Wilson, NRTL and UNIQUAC, were fitted to the data to estimate binary interaction parameters using an objective function of minimising the deviation between the experimental and the calculated total pressure and vapour composition. The experimental data were compared with the model predictions with the estimated parameters and the model predictions were found appropriate. The binary system of aniline and ethylene glycol was found to exhibit azeotropic behaviour at 0.61 mole fraction aniline and 445.1 K.}, doi = {10.1080/00194506.2018.1529634}, author = {Mali, P.K. and Mali, N.A. and Yadav, S.S. and Joshi, S.S.} } @article {47176, title = {Aqueous-phase differentiation and speciation of Fe3+ and Fe2+ using water-stable photoluminescent lanthanide-based metal-organic framework}, journal = {ACS Applied Nano Materials}, volume = {2}, year = {2019}, month = {AUG}, pages = {5169-5178}, type = {Article}, abstract = {

Fe2+ is vital to O-2 transportation and photosynthesis regulated by oxidases and reductases. On the other hand, Fe3+ is detrimental due to its irreversible binding to O-2. Hence there is a need for selective identification of Fe3+ from aqueous systems in the presence of Fe2+. However, given their close chemical nature, it is not straightforward to differentiate them. Fe2+ and Fe3+ are typically sensed and differentiated using magnetic measurements, Mossbauer, X-ray absorption spectroscopy, or EXAFS, which are complex and equipment intensive techniques. In comparison, the fluorescence technique is advantageous in terms of time and accessibility. Although readily available lanthanide salts exhibit fluorescence, they are weak, and to serve as an optical probe, their luminescence has to be enhanced via ligand design. Hence we have designed a chromophoric ligand that can covalently bind to lanthanides and enhance its fluorescence intensity, and it binds selectively to Fe3+ through its nitrogen centers. It detects Fe3+ from low concentration (similar to 100 mu M) aqueous solutions, with fast response time (\<1 min) and with a detection limit of 3.6 ppm. Importantly, the Fe3+ adsorbed MOF can be readily reactivated for the next cycle by merely washing with an aqueous ascorbic acid solution and can be used for multiple cycles without any appreciable loss in activity. This makes the Ln-MOF an environmentally benign, cost-effective, scalable, and recyclable probe.

}, keywords = {Fe3+ differentiation and speciation, flexible ligand, fluorescent MOF, iron speciation, Metal-organic framework, water sorption}, issn = {2574-0970}, doi = {10.1021/acsanm.9b01047}, author = {Maity, Rahul and Chakraborty, Debanjan and Nandi, Shyamapada and Yadav, Ankit Kumar and Mullangi, Dinesh and Vinod, C. P. and Vaidhyanathan, Ramanathan} } @article {46268, title = {Co amorphous valsartan nifedipine system: Preparation, characterization, in vitro and in vivo evaluation}, journal = {European Journal of Pharmaceutical Sciences}, volume = {139}, year = {2019}, month = {NOV}, type = {Article}, abstract = {

Co amorphous systems are supersaturated drug delivery systems which offer a basic platform for delivery of multicomponent adducts (combination of more than one active pharmaceutical ingredient (API)) and/or as a fixed dose combination therapy, in addition to their potential to improve the apparent solubility, dissolution rate and ultimately bioavailability of poorly water soluble APIs. In the present work, a new drug-drug co amorphous system namely valsartan-nifedipine was prepared by quench cooling technique. Prepared co amorphous system was characterized for its solid state behavior with the help of Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Powder X Ray Diffractometry (PXRD). The optimized co amorphous system was stable for 1 month when exposed to accelerated stability condition (40 +/- 2 degrees C and 75 +/- 5\% RH). The improved stability of amorphous nifedipine in co amorphous system was attributed to improved miscibility and intra and intermolecular non-covalent interactions mainly due to presence of hydrogen bonding between valsartan and nifedipine which was studied by FTIR analysis. Co amorphous systems were evaluated by mainly in vitro dissolution and in vivo benefit. In vitro dissolution study showed nearly 5.66 folds and 1.61 folds improvement which was translated to 3.63 and 2.19 times enhancement in vivo C-max for nifedipine and valsartan respectively.

}, doi = {10.1016/j.ejps.2019.105048}, author = {Lodagekar, Anurag and Chavan, Rahul B. and Mannava, M. K. Chaitanya and Yadav, Balvant and Chella, Naveen and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {45806, title = {Density functional theory-based study of the magnetic and optical properties of PbMO3 (M = Cr, Fe) using the modified BeckeJohnson mBJ functional}, journal = {Journal of Physics and Chemistry of Solids}, year = {2019}, month = {MAY}, type = {Article}, chapter = {275-282}, abstract = {

In this study, we employed the density functional theory (DFT) approach using WIEN2k code to study the magnetic and optical behaviors of PbCrO3 and PbFeO3 perovskites in both cubic and tetragonal phases. We determined the stability of the ferromagnetic state in terms of the enthalpy of formation, the half-metallic behavior, and spin polarization. The origin and nature of the ferromagnetic state were attributed to John-Teller distortion and a super-exchange mechanism. Comparisons of the calculated crystal field, John-Teller distortion, and exchange energies indicated the stability of the ferromagnetic nature. Due to strong hybridization, the magnetic moment was reduced at the Cr/Fe sites but generated at the nonmagnetic sites. The optical characteristics were explained by in-depth analyses of the polarization, plasmonic resonance, transparency, and other features in terms of the computed parameters.

}, issn = {00223697}, doi = {10.1016/j.jpcs.2017.12.030}, author = {Mahmood, Q. and Hassan, M. and Bhamu, K.C. and Yaseen, M. and Ramay, S.M. and Mahmood, A.} } @conference {46218, title = { Efficient removal of Arsenic (III) by novel micro and nano dialdehyde cellulose-cysteine complex extracted from wood pulp cellulose }, booktitle = {Abstracts of Papers of the American Chemical Society}, year = {2019}, month = {APR}, address = {Orlando, FL}, author = {Chen, Hui and Sharma, Sunil and Sharma, Priyanka and Yeh, Heidi and Hsiao, Benjamin} } @article {46215, title = { Freestanding borophene and Its hybrids }, journal = {Advanced Materials}, volume = {31}, year = {2019}, month = {JULY}, type = {Article}, abstract = {

Borophene, an elemental metallic Dirac material is predicted to have unprecedented mechanical and electronic character. Need of substrate and ultrahigh vacuum conditions for deposition of borophene restricts its large-scale applications and significantly hampers the advancement of research on borophene. Herein, a facile and large-scale synthesis of freestanding atomic sheets of borophene through a novel liquid-phase exfoliation and the reduction of borophene oxide is demonstrated. Electron microscopy confirms the presence of beta(12), X-3, and their intermediate phases of borophene; X-ray photoelectron spectroscopy, and scanning tunneling microscopy, corroborated with density functional theory band structure calculations, validate the phase purity and the metallic nature. Borophene with excellent anchoring capabilities is used for sensing of light, gas, molecules, and strain. Hybrids of borophene as well as that of reduced borophene oxide with other 2D materials are synthesized, and the predicted superior performance in energy storage is explored. The specific capacity of borophene oxide is observed to be approximate to 4941 mAh g(-1), which significantly exceeds that of existing 2D materials and their hybrids. These freestanding borophene materials and their hybrids will create a huge breakthrough in the field of 2D materials and could help to develop future generations of devices and emerging applications.

}, doi = { 10.1002/adma.201900353}, author = {Ranjan, Pranay and Sahu, Tumesh Kumar and Bhushan, Rebti and Yamijala, Sharma S. R. K. C. and Late, Dattatray J and Kumar, Prashant and Vinu, Ajayan} } @article {47171, title = {Graphene oxide supported liposomes as red emissive theranostics for phototriggered tissue visualization and tumor regression}, journal = {ACS Applied Bio Materials}, volume = {2}, year = {2019}, month = {JUL}, pages = {3312{\textendash}3320}, abstract = {

Selective tissue visualization and localized tumor regression without affecting the surrounding healthy tissues are critical concerns in cancer nanomedicine. Importantly, the complete wrapping of a flimsy matrix like liposome by multifunctional graphene oxide is an interesting engineering idea for nanomedicine design. Moreover, designing a safe and biodegradable nanohybrid with significant theranostic ability is a current need for targeted combined therapies. Here, we report a comprehensive result of in vivo tumor diagnosis and phototriggered tumor regression using a biodegradable red emissive nanotheranostic system, viz., graphene oxide flakes fortified liposome (GOF-Lipo), functionalized with folic acid (FA): GOF-Lipo-FA. Graphene oxide support enhances the stability of drug-loaded liposomes in an extracellular environment that prevents the premature release of loaded anticancer drug from the liposomal cavity. Promising outcomes of tumor regression (\~{}300 to 25 mm3) from organized cellular and animal studies are demonstrated in this work. These studies reveal superior biocompatibility, deep intracellular localization, 4T1 breast tumor diagnosis, and long time tumor binding ability of an injected emissive nanohybrid. Overall, a single dose of designed multifunctional systems demonstrates the best tumor regression.

}, doi = {10.1021/acsabm.9b00335}, author = {Prasad, Rajendra and Yadav, Amit S. and Gorain, Mahadeo and Chauhan, Deepak S. and Kundu, Gopal C. and Srivastava, Rohit and Selvaraj, Kaliaperumal} } @article {46179, title = {Graphene-modified electrodes for sensing doxorubicin hydrochloride in human plasma}, journal = {Analytical and Bioanalytical Chemistry}, volume = {411}, year = {2019}, month = {MAR}, pages = {1509-1516}, type = {Article}, abstract = {

Doxorubicin (DOX), an anthracycline molecule, is currently one of the most widely used anticancer drugs in clinics. Systematic treatment of patients with DOX is known to be accompanied by several unpleasant side effects due to the toxicity of the drug. Thus, monitoring of DOX concentration in serum samples has become increasingly important to avoid side effects and ensure therapeutic efficiency. In this study, we discuss the construction of a disposable electrochemical sensor for the direct monitoring of DOX in clinical blood samples. The sensor is based on coating a gold electrode in a flexible integrated electrode construct formed on polyimide sheets using photolithography, with nitrogen-doped reduced graphene oxide (N-rGO) suspended in chitosan. Under optimized conditions, a linear relationship between the oxidative peak current and the concentration of DOX in the range of 0.010-15M with a detection limit of 10nM could be achieved. The sensor was adapted to monitor DOX in serum samples of patients under anticancer treatment.

}, keywords = {Disposable electrodes, doxorubicin, Nitrogen-doped reduced graphene oxide, Serum}, issn = {1618-2642}, doi = {10.1007/s00216-019-01611-w}, author = {Chekin, Fereshteh and Myshin, Vladyslav and Ye, Ran and Melinte, Sorin and Singh, Santosh K. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {46285, title = {Hepatoprotective cocrystals of isoniazid: synthesis, solid state characterization, and hepatotoxicity studies}, journal = {Crystal Growth \& Design}, volume = {19}, year = {2019}, month = {SEP}, pages = {5161-5172}, type = {Article}, abstract = {

Isoniazid (INH) is one of the first line drugs used in combination with pyrazinamide and rifampicin for the management of tuberculosis. Idiosyncratic hepatotoxicity is one of the most common side effects of antitubercular therapy worldwide. The current study explores solid phase modification of INH by cocrystallization with various hepatoprotective coformers, namely chrysin, hesperetin, silibinin, syringic acid (SYRA), and quercetin (QUE) to address hepatotoxicity concerns. Cocrystals were obtained with SYRA and QUE. Supramolecular synthons based on pyridine-carboxyl and pyridine-hydroxyl synthon enabled the formation of cocrystals. INHSYRA and INHQUE cocrystals were characterized by FT-IR, DSC, and PXRD. Single crystal X-ray analysis of INHSYRA revealed that it crystallized in triclinic system with the P (1) over bar space group. Intrinsic dissolution rate studies (IDR) showed slow drug release from both the cocrystals. Hepatoprotective effects of INHSYRA and INHQUE cocrystals were evaluated by a single toxic dose study and a subchronic study for 28 days. Results from the subchronic study indicated significant increase in ALT, AST, and ALP enzyme levels in the INH-treated group whereas the enzyme levels in INHSYRA and INHQUE cocrystal treated group were comparable to that of the untreated group. This study demonstrates the in vivo hepatoprotective effects of coformers SYRA and QUE provide promising evidence for utility of nutraceutical based coformers, to tackle hepatotoxicity associated with various drugs.

}, doi = {10.1021/acs.cgd.9b00541}, author = {Yadav, Balvant and Gunnam, Anilkumar and Thipparaboina, Rajesh and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {46284, title = {High content screening assay for identifying inhibitors against active and dormant state intracellular Mycobacterium tuberculosis}, journal = {Journal of Microbiological Methods}, volume = {164}, year = {2019}, month = {SEP}, type = {Article}, abstract = {

The antitubercular drug development pipeline could start with an in vitro investigation of several compounds to examine their effect on active and dormant state Mycobacterium tuberculosis (Mtb). However, in vitro screening of dormant state bacilli cannot provide enough information on the simultaneous effect of a compound on the host. Therefore, we developed a live cell fluorescence based screening protocol by utilizing the high content system for determining the effect of inhibitors against active and dormant state intracellular mycobacteria. THP-1 macrophages infected with an actively growing and hypoxia derived dormant Mtb culture were standardized to develop the screening protocol. The signal to noise ratio and the Z{\textquoteright} factor of this assay were found to be 7.5-29 and 0.6-0.8, respectively, which confirm the robustness of the protocol. The protocol was then validated with standard inhibitors. This newly developed drug screening assay offers an easy, safe, image based high content screening tool to search for novel antitubercular inhibitors against both active and dormant state intracellular mycobacteria. Therefore, this assay could fill in the gap between in vitro and in vivo latent tuberculosis drug screening programs.

}, doi = {10.1016/j.mimet.2019.105687}, author = {Yeware, Amar and Agrawal, Sonia and Sarkar, Dhiman} } @article {45622, title = {Highly frustrated liquid crystal phases in optically active dimers: synthesis and rich phase transitional behavior}, journal = {New Journal of Chemistry}, volume = {43}, year = {2019}, month = {JAN}, pages = {2148-2162 }, type = {Article}, abstract = {Herein we report on the synthesis and characterization of four new series of optically active, nonsymmetric dimers in which cholesterol is covalently linked to a Schiff base core through an ω-oxyalkanoyl spacer. While the Schiff base core is substituted with n-butyloxy, n-hexyloxy, n-octyloxy, n-decyloxy and n-dodecyloxy tails, three even-parity spacers, namely, 4-oxybutanoyl, 6-oxyhexanoyl, 8-oxyoctanoyl, and an odd-parity spacer, namely, 5-oxypentanoyl, have been used to join the two cores. The experimental results show that the length and parity of the spacer and the length of the terminal tail play a vital role in deciding the phase sequences of the dimers. In general, the dimers possessing an even-parity spacer display enantiotropic LC phases such as chiral nematic (N*), twist grain boundary (TGB), smectic A (SmA), chiral smectic C (SmC*) and twist grain boundary phase with SmC* slabs (TGBC*). Some of these dimers display TGBC* over a wide temperature range. The dimers with an odd-parity (5-oxypentanoyl) spacer display, unlike their even-membered counterparts, blue phases (BPIII/II/I); besides, they stabilize N* and/or unknown smectic (SmX) phases. The circular dichroism (CD) measurements were carried out as a function of temperature on the planar texture formed by three even-membered dimers and an odd-membered dimer. The occurrence of a strong negative CD band in the N* phase of the even-membered dimers suggests a left-handed screw sense of the macroscopic helical structure, and the scenario is opposite in the case of an odd-membered dimer.}, doi = {10.1039/C8NJ03520B}, author = {Nayak, R. A. and Bhat, S. A. and Shanker, G. and Rao, D. S. S. and Yelamaggad, C. V.} } @article {45611, title = {Light-triggered, spatially localized chemistry by photoinduced electron transfer}, journal = {Angewandte Chemie-International Edition}, volume = {58}, year = {2019}, month = {FEB}, pages = {2715-2719}, type = {Article}, abstract = {

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross-linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.

}, doi = {10.1002/anie.201812700}, author = {Usgaonkar, S. and Deshmukh, S. and Biswas, B. and Karjule, N. and Yadav, P. and Nithyanandhan, J. and Kumaraswamy, G.} } @article {46289, title = {Lithium compounds as single site catalysts for hydroboration of alkenes and alkynes}, journal = {Chemical Communications}, volume = {55}, year = {2019}, month = {OCT }, pages = {11711-11714}, type = {Article}, abstract = {

The hydroboration of alkenes and alkynes using easily accessible lithium compounds [2,6-di-tert-butyl phenolatelithium (1a) and 1,1 {\textquoteleft} dilithioferrocene (1b)] has been achieved with good yields, high functional group tolerance and excellent chemoselectivity. Deuterium-labeling experiments confirm the cis-addition of pinacolborane. The methodology has been further extended to myrcene, which undergoes selective 4,3-hydroboration. DFT calculations provide insights into the mechanism.

}, issn = {1359-7345}, doi = {10.1039/c9cc05783h}, author = {Bisai, Milan Kumar and Yadav, Sandeep and Das, Tamal and Vanka, Kumar and Sen, Sakya S.} } @article {46005, title = {Metagenomic insights to understand transient influence of Yamuna River on taxonomic and functional aspects of bacterial and archaeal communities of River Ganges}, journal = {Science of the Total Environment}, volume = {674}, year = {2019}, month = {JUL}, pages = {288-299}, type = {Article}, abstract = {

River confluences are interesting ecosystems to investigate for their microbial community structure and functional potentials. River Ganges is one of the most important and holy river of India with great mythological history and religious significance. The Yamuna River meets Ganges at the Prayagraj (formerly known as Allahabad), India to form a unique confluence. The influence of Yamuna River on taxonomic and functional aspects of microbiome at this confluence and its downstream, remains unexplored. To unveil this dearth, whole metagenome sequencing of the microbial (bacterial and archaeal) community from the sediment samples of December 2017 sampling expedition was executed using high throughput MinION technology. Results revealed differences in the relative abundance of bacterial and archaeal communities across the confluence. Grouped by the confluence, a higher abundance of Proteobacteria and lower abundance of Bacteroidetes and Firnacutes was observed for Yamuna River (G15Y) and at immediate downstream of confluence of Ganges (G15DS), as compared to the upstream, confluence, and farther downstream of confluence. A similar trend was observed for archaeal communities with a higher abundance of Euryarchaeoto in G15Y and G15DS, indicating Yamuna River{\textquoteright}s influence. Functional gene(s) analysis revealed the influence of Yamuna River on xenobiotic degradation, resistance to toxic compounds, and antibiotic resistance interceded by the autochthonous microbes at the confluence and succeeding downstream locations. Overall, similar taxonomic and functional profiles of microbial communities before confluence (upstream of Ganges) and farther downstream of confluence, suggested a transient influence of Yamuna River. Our study is significant since it may be foundational basis to understand impact of Yamuna River and also rare event of mass bathing on the microbiome of River Ganges. Further investigation would be required to understand, the underlying cause behind the restoration of microbial profiles post-confluence farther zone, to unravel the rejuvenation aspects of this unique ecosystem. (C) 2019 Elsevier B.A. All rights reserved.

}, keywords = {Confluence zone, Ganges, Metagenomics, Transient influence, Yamuna}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2019.04.166}, author = {Samson, Rachel and Shah, Manan and Yadav, Rakeshkumar and Sarode, Priyanka and Rajput, Vinay and Dastager, Syed G. and Dharne, Mahesh S. and Khairnar, Krishna} } @article {45616, title = {NHC-catalyzed generation of α,β-unsaturated acylazoliums for the enantioselective synthesis of heterocycles and carbocycles}, journal = {Accounts of Chemical Research}, volume = {52}, year = {2019}, month = {FEB}, pages = {425-436}, type = {Article}, abstract = {

It is reasonable to believe that the chemistry of α,β-unsaturated acylazoliums, catalytically generated through NHCs, will continue to flourish and will lead to amazing results. Future challenges in this area include the applications of this key intermediate in the synthesis of biologically active natural products and drugs.

}, doi = {10.1021/acs.accounts.8b00550 }, author = {Mondal, S. and Yetra, S. R. and Mukherjee, S. and Biju, A. T.} } @inbook {47494, title = {N-heterocyclic carbene-catalyzed stetter reaction and related chemistry}, booktitle = {N-Heterocyclic Carbenes in Organocatalysis}, year = {2019}, publisher = {Wiley}, organization = {Wiley}, chapter = {Chapter 3}, abstract = {The reversal of normal mode of reactivity (umpolung) of aldehydes is the most important application of N-heterocyclic carbenes (NHCs) in organocatalytic transformations. The benzoin condensation and the Stetter reaction are the two historic reactions where NHC reacts with aldehyde to generate acyl anion equivalent, which is subsequently intercepted with another molecule of carbonyl compound or Michael acceptor leading to the formation of the benzoin/Stetter products. The objective of this chapter is to provide an overview on NHC-catalyzed Stetter reaction and related chemistry. The development of various chiral catalysts for enantioselective intra- or intermolecular Stetter reaction has been described. Additionally, recent progress on NHC-catalyzed addition of aldehyde to unactivated multiple bonds in the hydroacylation reaction has been demonstrated.}, issn = {Online ISBN: 9783527809042}, doi = {10.1002/9783527809042.ch3}, author = {Mondal, Santigopal and Yetra, Santhivardhana R. and Biju, Akkattu T.} } @article {46099, title = {Nickel(ii)-catalyzed direct olefination of benzyl alcohols with sulfones with the liberation of H-2}, journal = {Chemical Communications}, volume = {55}, year = {2019}, month = {MAY }, pages = {6130-6133}, type = {Article}, abstract = {

A nickel(II)-catalyzed direct olefination of benzyl alcohols with sulfones to access various terminal and internal olefins with the liberation of hydrogen gas is reported.

}, issn = {1359-7345}, doi = {10.1039/c9cc02603g}, author = {Landge, Vinod G. and Yadav, Vinita and Subaramanian, Murugan and Dangarh, Pragya and Balaraman, Ekambaram} } @article {46049, title = {Phyto-inspired cyclic peptides derived from plant Pin-II type protease inhibitor reactive center loops for crop protection from insect pests}, journal = {Biochimica ET Biophysica Acta-General Subjects}, volume = {1863}, year = {2019}, month = {AUG}, pages = {1254-1262}, type = {Article}, abstract = {

Background: Natural defence of plants against insect pests involves protease inhibitors (PIs) that interfere with insect digestive proteases. Pin-II type plant PIs are wound inducible upon insect damage and possess multiple inhibitory repeat domains that can inhibit trypsin and chymotrypsin-like proteases in the insect midgut. Yet, their agricultural ex-vivo application is limited due to large molecular size and environmental instability, which could be overcome by small peptides. Methods: Bicyclic peptides were designed by grafting Pin-II PIs derived reactive center loop (RCL) on synthetic tris(bromomethyl)benzene scaffold. In vitro binding with trypsin-like proteases was evaluated by biochemical and biophysical assays, followed by molecular dynamics simulations. In vivo effects on two major lepidopteran insect pests, Helicoverpa armigera and Spodoptera litura were studied upon feeding with peptide treated leaves. Affinity based pull down assays were used to identify target proteins in insect gut. Results: Bicyclic RCLs showed ten-fold enhanced protease inhibition compared to their linear counterparts. They exhibited feeding deterrence and growth reduction of lepidopteran insects. Bicyclic peptides predominantly interact with midgut serine proteases. Possible binding modes involve simultaneous interaction with the active site and specificity-determining residues of insect gut trypsin. Conclusion: Bicyclic peptides are potent inhibitors of serine proteases in the insect midgut. They cause feeding aversion and larval growth retardation. Bi-domain cyclic peptides interact with two sites on trypsin, leading to enhanced efficacy over linear RCL peptides. General significance: Bicyclic peptides mimic natural PIs by inhibiting insect proteases leading to growth reduction, thus, could be used as pest control molecules in agriculture.

}, keywords = {Cyclic peptide, Lepidoptera, Pest control, protease inhibitor, Reactive loop}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2019.05.003}, author = {Sailthedkar, Nidhi S. and Joshi, Rakesh S. and Yadav, Amit K. and Seal, Shubhendu and Fernandes, Moneesha and Giri, Ashok P.} } @article {46200, title = {p-Nitrophenylcarbonates: a new class of compounds for chemodosimetric colorimetric fluoride anion sensing detectable by the naked eye}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {FEB}, pages = {1830-1833}, type = {Article}, abstract = {

A new class of compounds containing the p-nitrophenylcarbonate motif is reported, that can selectively sense fluoride anions over other halide anions with a detection limit ranging from 0.29 to 0.48 mu M. The fluoride ion acts as nucleophile, leading to the liberation of p-nitrophenol, that is easily detectable and quantifiable colorimetrically.

}, keywords = {colorimetric sensing, p-nitrophenyl carbonate, selective fluoride detection}, issn = {2365-6549}, doi = {10.1002/slct.201803103}, author = {Yadav, Amit Kumar and Chilukuri, Harsha and Kumari, Linthoinganbi Raj and Karthikeyan, Muthukumarasamy and Fernandes, Moneesha} } @article {46427, title = {Preparation and activity of copper-gallium nanocomposite catalysts for carbon dioxide hydrogenation to methanol}, journal = {Industrial \& Engineering Chemistry Research}, volume = {58}, year = {2019}, month = {NOV}, pages = {21331-21340}, type = {Article}, abstract = {

Copper (Cu) nanocomposite catalysts with gallium (Ga) and aluminum (Al) were prepared using the simultaneous coprecipitation digestion method. The catalysts were characterized by N-2 adsorption, N2O titration, XRD (X-ray diffraction), H-2-TPR (H-2 temperature-programmed reduction), XPS (X-ray photoelectron spectroscopy), and CO2-TPD (CO2 temperature-programmed desorption) techniques, and CO2 hydrogenation to methanol synthesis was performed. The use of Ga in Cu catalysts enhanced the weak basic sites more than the Cu catalysts with Al. With the CuGa nanocomposite formation, the catalyst showed a sequential reduction of CuO, for example, Cu+2 to Cu+ to Cu-0, and the Cu surface area was also high in comparison with CuAl. These findings confirmed that both the Cu surface area and CuO reducibility in the catalyst helped to boost the conversion of CO2, whereas selectivity to methanol was associated with the basicity of the catalyst. CuAl catalysts showed very poor selectivity to methanol despite CO formation, which could be due to the weak interaction of the CuAl nanocomposite catalysts compared to the CuGa nanocomposite catalysts.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.9b04083}, author = {Hengne, Amol M. and Yuan, Ding Jier and Date, Nandan S. and Saih, Youssef and Kamble, Sanjay P. and Rode, V. Chandrashekhar and Huang, Kuo-Wei} } @article {46304, title = {Sustained release insect repellent microcapsules using modified cellulose nanofibers (mCNF) as pickering emulsifier}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {582}, year = {2019}, month = {DEC }, pages = {Article Number:123883}, type = {Article}, abstract = {

We report here an approach to encapsulate N, N-diethyl-3-methylbenzamide (DEET), an insect repellent, through interfacial polycondensation using modified cellulose nanofiber (CNF) as pickering emulsifier. We found that stearic acid functionalized CNF (mCNF) can be used to form stable pickering emulsions (oil-in-oil and water-in-oil), and further encapsulate DEET using interfacial polycondensation with very high encapsulation efficiency of about 98\%. Another major advantage of this approach is that mCNF can act both as pickering emulsifier and also strengthen the barrier properties of microcapsules resulting in significant reduction in release rate of DEET. Interpretation of the release profiles using standard mathematical models proposed by Ritger-Peppas show a factor of three reduction in release rate constant for the microcapsules reinforced with mCNF.

}, keywords = {Cellulose nanofiber, Controlled release, Microcapsules, Nanocomposite, nanoparticle, Pickering emulsion}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2019.123883}, author = {Kadam, Sandip L. and Yadav, Prashant and Bhutkar, Siddhant and Patil, Vishal D. and Shukla, Parshuram G. and Shanmuganathan, Kadhiravan} } @article {46293, title = {Using diphenyleneiodonium to induce a viable but non-culturable phenotype in Mycobacterium tuberculosis and its metabolomics analysis}, journal = {Plos One}, volume = {14}, year = {2019}, month = {AUG}, pages = {e0220628}, type = {Article}, abstract = {

Depletion of oxygen levels is a well-accepted model for induction of non-replicating, persistent states in mycobacteria. Increasing the stress levels in mycobacterium bacilli facilitates their entry into a non-cultivable, dormant state. In this study, it was shown that diphenyleneiodonium, an inhibitor of NADH oxidase, induced a viable, but non-culturable state in mycobacteria, having similar features to dormant bacilli, like loss of acid-fastness, upregulation of stress-regulated genes and decreased superoxide levels as compared to actively growing bacilli. Comprehensive, untargeted metabolic profiling also confirmed a decrease in biogenesis of amino acids, NAD, unsaturated fatty acids and nucleotides. Additionally, an increase in the level of lactate, fumarate, succinate and pentose phosphate pathways along with increased mycothiol and sulfate metabolites, similar to dormant bacilli, was observed in the granuloma. These non-cultivable bacilli were resuscitated by supplementation of fetal bovine serum, regaining their culturability in liquid as well as on agar medium. This study focused on the effect of diphenyleneiodonium treatment in causing mycobacteria to rapidly transition from an active state into a viable, but non-cultivable state, and comparing their characteristics with dormant phenotypes.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0220628}, author = {Yeware, Amar and Gample, Suwarna and Agrawal, Sonia and Sarkar, Dhiman} } @article {46716, title = {Amidinato germylene-zinc complexes: synthesis, bonding, and reactivity}, journal = {Chemistry-An Asian Journal}, volume = {15}, year = {2020}, month = {OCT }, pages = {3116-3121}, type = {Article}, abstract = {

Despite the explosive growth of germylene compounds as ligands in transition metal complexes, there is a modicum of precedence for the germylene zinc complexes. In this work, the synthesis and characterization of new germylene zinc complexes [PhC(NtBu)(2)Ge{N(SiMe3)(2)}-\> ZnX2](2)(X= Br (2) and I (3)) supported by (benz)-amidinato germylene ligands are reported. The solid-state structures of2and3have been validated by single-crystal X-ray diffraction studies, which revealed the dimeric nature of the complexes, with distorted tetrahedral geometries around the Ge and Zn center. DFT calculations reveal that the Ge-Zn bonds in2and3are dative in nature. The reaction of2with elemental sulfur resulted in the first structurally characterized germathione stabilized ZnBr(2)complexes PhC(NtBu)(2)Ge(=S){N(SiMe3)(2)}-\> ZnBr2(5). Therefore, the Ge=S in5is in-between Ge-S single and Ge=S double bond length, owing to the coordination of a sulfur lone pair of electrons to ZnBr2.

}, keywords = {DFT, Germathione, Germylene, X-ray Structure, zinc}, issn = {1861-4728}, doi = {10.1002/asia.202000807, Early Access Date = SEP 2020}, author = {Yadav, Sandeep and Kumar, Rohit and Raj, K. Vipin and Yadav, Prashant and Vanka, Kumar and Sen, Sakya S.} } @article {47014, title = {Antidiabetic activity of dihydropyrimidine scaffolds and structural insight by single crystal x-ray studies}, journal = {Medicinal Chemistry}, volume = {16}, year = {2020}, month = {JAN}, pages = {996-1003}, type = {Article}, abstract = {

Background: This research project is designed to identify the anti-diabetic effects of the newly synthesized compounds to conclude the perspective of consuming one or more of these new synthetic compounds for diabetes management. Introduction: A series of dihydropyrimidine (DHPM) derivative bearing electron releasing and electron-withdrawing substituent{\textquoteright}s on phenyl ring (a-j) were synthesized and screened for antihyperglycemic(anti-diabetic) activity on streptozotocin (STZ) induced diabetic rat model. The newly synthesized compounds were characterized by using FT-IR, melting point, H-1 and C-13 NMR analysis. The crystal structure and supramolecular features were analyzed through single-crystal X-ray study. Anti-diabetic activity testing of newly prepared DHPM scaffolds was mainly based on their relative substituent on the phenyl ring along with urea and thiourea. Among the synthesized DHPM scaffold, the test compound c having chlorine group on phenyl ring at the ortho position to the hydropyrimidine ring with urea and methyl acetoacetate derivative shows moderate lowering of glucose level. However, the title compounds methyl 4-(4-hydroxy-3-methoxyphenyl)-6-methyl-2-thioxo-1,2,3,4-tetrahydropyrimi dine-5-carboxylate(g) and ethyl 4-(3-ethoxy-4-hydroxyphenyl)-6-methyl-2-oxo-1,2,3,4-tetrahydroprimidine- 5-carboxylate(h) having methoxy and ethoxy substituents on phenyl ring show significant hypoglycemic activity compared to the remaining compounds from the Scheme 1. Methods: The experimental rat models for the study were divided into 13 groups (n = 10); group 1 animals were treated with 0.5\% CMC (0.5mL) (vehicle); group 2 were considered the streptozotocin (STZ)/nicotinamide diabetic control group (DC) and untreated, group 3 diabetic animals were administered with gliclazide 50 mg/kg and act as a reference drug group. The remaining groups of the diabetic animals were administered with the newly synthesized dihydropyrimidine compounds in a single dose of 50 mg/kg orally using the oral gavage, daily for 7 days continuously. The blood glucose level was measured before and 72 hrs after nicotinamide-STZ injection, for confirmation of hyperglycemia and type 2 diabetes development. Results: Blood glucose levels were significantly (p\<0.05) reduced after treatment with these derivatives. The mean percentage reduction for gliclazide was 50\%, while that of synthesized compounds were approximately 36\%. Conclusion: Our result suggests that the synthesized new DEEM derivative containing alkoxy group on the phenyl ring shows a significant lowering of glucose level compared to other derivatives.

}, keywords = {anti-Diabetic, blood glucose levels, dihydropyrimidine, hypoglycemic activity, Streptozotocin, type 2 diabetes mellitus}, issn = {1573-4064}, doi = {10.2174/1573406416666191227123048}, author = {Bairagi, Keshab M. and Younis, Nancy S. and Emeka, Promise M. and Sangtani, Ekta and Gonnade, Rajesh G. and Venugopala, Katharigatta N. and Alwassil, I. Osama and Khalil, Hany E. and Nayak, Susanta K.} } @article {46880, title = {Aromatic amine passivated TiO2 for dye-sensitized solar cells (DSSC) with similar to 9.8\% efficiency}, journal = {Solar Energy}, volume = {201}, year = {2020}, month = {MAY }, pages = {965-971}, type = {Article}, abstract = {

In this work, the efficiency of dye-sensitized solar cells (DSSC) was improved by capping TiO2 with simple aromatic amines as a complexing agent. The aromatic amines, aniline and o-phenylenediamine capped TiO2 composites were synthesized via hydrothermal route and used as scattering layer in dye-sensitized solar cell (DSSC). Markedly, the maximum photo-conversion efficiency of 9.84\% was achieved with o-phenylenediamine capped-TiO2 composite as o-phenylenediamine capped-TiO2 showed higher reflectivity than the pristine TiO2, which is highly beneficial for reflecting the photons back to photoanode. In addition, the average life time of carriers in o-phenylenediamine capped-TiO2 was found to be 9.8 ms, which was 2 times higher than the pristine TiO2 (4.29 ms).

}, keywords = {Aromatic amines, DSSC, Electron injection, lifetime, Scattering layer, TiO2}, issn = {0038-092X}, doi = {10.1016/j.solener.2020.03.077}, author = {Kumar, T. R. Naveen and Yuvaraj, S. and Kavitha, P. and Sudhakar, Vediappan and Krishnamoorthy, Kothandam and Neppolian, B.} } @article {47000, title = {Chemoselective ring closure of 4-(3-Methyl-2-oxo-2,5-dihydro-1H-pyrrol-1-yl)butanal leading to pandalizine A}, journal = {ACS Omega}, volume = {5}, year = {2020}, month = {JAN }, pages = {859-863}, type = {Article}, abstract = {

Starting from methylmaleic anhydride, a facile total synthesis of pandalizine A alkaloid is described via the regioselective reduction of methylmaleimide and acid-catalyzed enolization of 4-(3-methyl-2-oxo-2,5-dihydro-1H-pyrrol-1-yl)butanal followed by chemoselective intramolecular dehydrative cyclization as the key steps. It is noteworthy that the analogous model system with an additional beta-methyl group followed an alternative chemoselective intermolecular aldol condensation pathway.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b03760}, author = {Yadav, Mahesh B. and Pandhade, Kailas R. and Argade, Narshinha P.} } @article {46698, title = {Comprehensive metagenomic insights into a unique mass gathering and bathing event reveals transient influence on a riverine ecosystem}, journal = {Ecotoxicology and Environmental Safety}, volume = {202}, year = {2020}, month = {OCT }, pages = {110938}, type = {Article}, abstract = {

The religious mass gathering and bathing can pose a multitude of significant public health challenges and lead to severe alterations in the river microbial ecology. The Pandharpur Wari is an annual pilgrimage of Maharashtra, India, where millions of devotees carry the footprints of the saint-poets and pay their obeisance to Lord Vitthal on the 11th day of moon{\textquoteright}s waxing phase (Ashadi Ekadashi). As a part of the ritual, the engrossed devotees, walk over 250 km, take a first holy dip in a sacred river Indrayani at Alandi and secondly in Bhima River at Pandharpur. The MinION-based shotgun metagenomic approach was employed to examine the impact of spiritual mass bathing on environmental changes (concerning the river microbial community structure and functions); and public health aspects (in terms of changes in the pathogenic potential and antibiotic resistance). The analysis of bathing and post-bathing samples of both the rivers revealed alterations in the alpha and beta diversity, indicating significant spatiotemporal variations in the overall microbial structure and function. Furthermore, the analysis revealed up to 80\% of differences in the abundance of virulence genes between the bathing and post bathing samples. We observed parallel increase of priority skin and enteric pathogens (ranging from 11\% to 80\%) such as Acinetobacter baumannii, Staphylococcus aureus, Streptococcus pyogenes, Mycobacterium tuberculosis, and Pseudomonas aeruginosa during the bathing event. Moreover, we observed a significant increase in the antibiotic resistance in the bathing samples of Bhima and Indrayani rivers respectively. Altogether, this is the first comprehensive metagenomic study unravelling the influence of religious mass-bathing on the riverine ecosystem.

}, keywords = {Antibiotic resistance, Mass bathing, MinION sequencing, Priority pathogens, Virulence genes}, issn = {0147-6513}, doi = {10.1016/j.ecoenv.2020.110938}, author = {Yadav, Rakeshkumar and Rajput, Vinay and Gohil, Kushal and Khairnar, Krishna and Dharne, Mahesh} } @article {46824, title = {Conjunctive photoluminescence enhancement through plasmonic and photonic band-gap pathways in a chiral self-assembled system}, journal = {ChemPhotoChem}, volume = {4}, year = {2020}, month = {AUG}, pages = {582-591}, type = {Article}, abstract = {

We describe two parallel pathways for enhancing the intrinsic photoluminescence of an organic emitter dispersed in a liquid crystal (LC) medium. The pathways have independent origins: (i) Metal enhanced fluorescence (MEF) incorporating gold nanoparticles having an organic shell of pro-mesogenic cholesterol esters; and (ii) Matching the photonic band gap (PBG) due to the helical structure in a self-assembled chiral system with the excitation wavelength. This unprecedented combination of both pathways achieves a level of photoluminescence exceeding the sum of the contribution from the individual methods. This conjunctive protocol results in an overall enhancement by a factor of 37 between the emitter dispersed in a non-chiral LC and that appealing to both MEF and PBG pathways. Circular polarized luminescence measurements also show that this protocol helps in effective discrimination of chiral light achieving a large dissymmetry factor whose magnitude (+0.33) is comparable to the highest recorded to date. Electric field switching between two states is also shown to result in appreciable fluorescence modulation. Being generic in nature the protocol employed can be adapted to a variety of situations with the large magnitude as well the modulation level suitable for applications such as biosensors, various analyte detection, and other photonic devices.

}, keywords = {chirality, circularly polarized luminescence, liquid crystals, photonic band-gap, plasmonics}, issn = {2367-0932}, doi = {10.1002/cptc.202000077, Early Access Date = JUN 2020}, author = {Baral, Marlin and Krishna Prasad, S. and Bhat, Sachin A. and Nayak, Rashmi A. and Yelamaggad, C. V.} } @article {47314, title = {Deciphering taxonomic and functional diversity of fungi as potential bioindicators within confluence stretch of Ganges and Yamuna Rivers, impacted by anthropogenic activities}, journal = {Chemosphere}, volume = {252}, year = {2020}, month = {AUG}, type = {Article}, abstract = {

River confluences are interesting ecological niche with limited information in respect of the structure and the functions of diverse microbial communities. Fungi are gaining global attention as promising biological spectacles for defining the trophic status of riverine systems. We condense existing knowledge in confluence diversity in two Indian rivers (i.e. Ganges and Yamuna), by combining sediment metagenomics using long read aided MinION nanopore sequencing. A total of 63 OTU{\textquoteright}s were observed, of which top 20 OTU{\textquoteright}s were considered based on relative abundance of each OTU at a particular location. Fungal genera such as\ Aspergillus, Penicillium,\ Kluveromyces, Lodderomyces,\ and\ Nakaseomyces\ were deciphered as potential bio indicators of river pollution and eutrophication in the confluent zone.\ In silico\ functional gene analysis uncovered hits for neurodegenerative diseases and xenobiotic degradation potential, supporting bioindication of river pollution in wake of anthropogenic intervention.

}, doi = {10.1016/j.chemosphere.2020.126507}, author = {Samson, Rachel and Rajput, Vinay and Shah, Manan and Yadav, Rakeshkumar and Sarode, Priyanka and Dastager, Syed G. and Dharne, Mahesh S. and Khairnar, Krishna} } @article {46841, title = {Design, expression, and evaluation of novel multiepitope chimeric antigen of Wuchereria bancrofti for the diagnosis of lymphatic filariasis - A structure-based strategy}, journal = {International Immunopharmacology}, volume = {83}, year = {2020}, month = {JUN}, pages = {106431}, type = {Article}, abstract = {

The Global Program for Elimination Lymphatic Filariasis (GPELF) is in an advanced stage and requires tools for diagnosing infection, assessing transmission and certification. This study was aimed at developing an antibody-based assay using a chiemric antigen containing multi-B-cell epitopes from antigens highly expressed in different stages of Wuchereria bancrofti to detect LF infection and its transmission. The antigen was express cloned and two indirect ELISA based (IgG1 \& IgG4 based) antibody assays were developed using the recombinant antigen. The chimeric antigen displayed 1 and 3-fold reactivity with IgG1 and IgG4 antibodies, respectively in microfilaraial (mf) positive sera when compared to that in sera samples of Non-endemic normal sera (NEN) (O.D, 0.13 +/- 0.20 and 0.18 +/- 0.07), thus differentiating infected from uninfected individuals. In IgG1 and IgG4 antibody assays, the multiepitope antigen also showed reactivity (O.D, 0.27 +/- 0.18 and 0.16 +/- 0.03) in a small proportion (18 and 30, respectively out of 156) endemic normal individuals and in IgG1 antibody in a few (4) chronic patients (CP). The antigen did not react with IgG1 or IgG4 antibodies in the sera samples of malaria, scrub typhus, dengue, hookworm, and roundworm helminth cases (0.139 +/- 0.018, 0.144 +/- 0.007 0.17804 +/- 0.007 and 0.162 +/- 0.006), thus showing its high specificity. The sensitivity (\%) and specificity (\%) of the multi-epitope antigen-based IgG1 and IgG4 antibody assays are 100, 98.1 and 100, 99.52, respectively. Thus, the recombinant multiepitope antigen appears to have good potential in detecting active LF infection and in assessing its transmission in endemic communities.

}, keywords = {Filariasis, Multi-epitope antigen, Serodiagnosis, Transmission}, issn = {1567-5769}, doi = {10.1016/j.intimp.2020.106431}, author = {Yasin, Nazeer and Laxmanappa, Hoti Sugerappa and Muddapur, Uday M. and Cheruvathur, Jennifer and Prakash, S. M. Uday and Thulasiram, Hirekodathakallu Venkataramaiah} } @article {46887, title = {Dual responsive cellulose microspheres with high solid-state fluorescence emission}, journal = {Colloids and Surfaces A-Physicochemical and Engineering Aspects}, volume = {591}, year = {2020}, month = {APR}, pages = {124510}, type = {Article}, abstract = {

Materials that respond to multiple stimuli such as magnetic field and light are attractive for security and medical diagnostic applications. One of the major challenges in dual functional microspheres is that the presence of magnetic nanoparticles can quench fluorescence emission. Also, there is a probability of solid-state quenching due to the proximity of the fluorophore. We report here a facile approach to prepare cellulose microspheres with high solid-state fluorescence using 40 \% tetrabutylammonium hydroxide (TBAH). The fluorescence quenching effect due to the presence of Fe3O4 nanoparticles and solid-state quenching due to aggregation of fluorophore was systematically investigated. Microspheres with the detectable magnetic response and fluorescence quantum yield as high as 0.57 (FMB 414) was obtained by optimizing the reaction conditions. Such a high quantum yield has not been reported before for dual stimuli-responsive fluorescent microspheres. The magnetic and fluorescent properties were found to be durable even after multiple washing cycles. These dual responsive cellulose microspheres can be added as security features to authenticate documents such as passports, degree certificates, currency notes, financial documents etc.

}, keywords = {Fluorescent, Magnetic, Microcrystalline cellulose, microspheres, Stimuli responsive microspheres, Tetrabutylammonium hydroxide}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2020.124510}, author = {Yadav, Prashant and Prajitha, K. P. and Dhaware, Vinita and Subramani, Mohan and Joy, Pattayil and Asha, S. K. and Shanmuganathan, Kadhiravan} } @article {46615, title = {Effect of tert-alcohol functional imidazolium salts on oligomerization and fibrillization of amyloid beta (1-42) peptide}, journal = {Biophysical Chemistry}, volume = {267}, year = {2020}, month = {DEC}, pages = {106480}, type = {Article}, abstract = {

Imidazolium based IL{\textquoteright}s has gained vast interest in developing biological applications. Oligomerization and fibrillization of amyloid beta (1-42) peptide are mainly responsible for the extra-neuronal deposition of amyloid fibrils in neurodegenerative disorders like Alzheimer{\textquoteright}s disease (AD). Here, we report an effect of tert-BuOH-functional imidazolium ILs on oligomerization and fibrillization of amyloid beta (1-42) Peptide in vitro. In this study, a series of these [alkyl-(t)OHim][OMs] ILs with methyl sulphonate counter anion by varying alkyl chains were used. Among the seven protic ILs, four showed strong binding and inhibition activity for the formation of amyloid beta (1-42) aggregation by using Thioflavin T fluorescence binding assay. The secondary structural analysis of the peptide, pre-incubated with active ILs shows the loss of ordered beta-sheet amyloid structure. The longer alkyl chain ILs showed that an increased in amyloid binding and hence an inhibition effect on amyloid aggregation was enhanced. Thus, we propose that ILs could be presented as potential candidates for therapeutic intervention against Alzheimer{\textquoteright}s disease (AD).

}, keywords = {Aggregation, Amyloid beta (1-42) peptide, Biofilm inhibitor, Imidazolium ionic liquid}, issn = {0301-4622}, doi = {10.1016/j.bpc.2020.106480}, author = {Said, Madhukar S. and Navale, Govinda R. and Yadav, Ashok and Khonde, Nilesh and Shinde, Sandip S. and Jha, Anjali} } @article {46748, title = {Electrochemical evaluation of the stability and capacity of r-GO-wrapped copper antimony chalcogenide anode for Li-ion battery}, journal = {ChemElectroChem}, volume = {7}, year = {2020}, month = {AUG }, pages = {3291-3300}, type = {Article}, abstract = {

Poor cycling stability and capacity fade are primary concerns for next-generation anode materials for Li-ion batteries. In non-carbonaceous anode materials, alloying with Li leads to volume increase that affects practical applications, and increase in particle size, amorphization and reduced conductivity can all lead to a loss of performance. In this work, binary antimony sulfide (Sb2S3) and ternary copper antimony sulfide (CuSbS2) are synthesized by a convenient solvothermal process. These materials are used to study the Li-active/inactive concept, by incorporating Cu into Sb(2)S(3)forming CuSbS(2)wherein Cu is Li inactive whereas Sb is Li active. By direct comparison, we have shown that incorporating Cu into binary antimony sulfide (Sb2S3) resulting into ternary copper antimony sulfide (CuSbS2) addresses the problem of poor conductivity and capacity loss, as Cu provides conductivity leading to enhanced charge transfer and prevents Sb particle aggregation while charge-discharge by exhibiting spectator or diluent ion effect. The better performance of CuSbS(2)is associated with the better Li(+)ion diffusion in the CuSbS2(D=8.97x10(-15) cm(2) s(-1)) compared to Sb2S3(D=2.76x10(-15) cm(2) s(-1)) and lower series resistance of CuSbS2(R=4.70x10(5) omega) compared to Sb2S3(R=5.81x10(8) omega). We have also investigated the composite with the addition of rGO. The CuSbS2-rGO delivered a reversible capacity of 672 mAh g(-1)after 1000 cycles at 200 mA g(-1)which has shown best performance.

}, keywords = {Batteries, chalcogenides, Diffusion coefficient, lithium, Ternary sulfides}, issn = {2196-0216}, doi = {10.1002/celc.202000625}, author = {Yadav, Poonam and Sharma, Neha and Patrike, Apurva and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha} } @article {46821, title = {Electrospun nanofibers of Tin phosphide (SnP0.94) nanoparticles encapsulated in a carbon matrix: a tunable conversion-cum-alloying lithium storage anode}, journal = {Energy \& Fuels}, volume = {34}, year = {2020}, month = {JUN}, pages = {7648-7657}, type = {Article; Proceedings Paper}, abstract = {

Anodes with improved Li storage capability are required for next-generation lithium batteries. In this work we report a convenient synthesis strategy, based on electrospinning followed by reduction and phosphorization, to prepare a tin phosphide (SnP0.94) phase in a carbon nanofiber matrix. The layered structure offered by the SnP0.94 phase, along with its small size (5-20 nm) encapsulated in the conducting carbon matrix, leads to promising electrochemical Li storage characteristics. This composite has a capacity of 750 mAh g(-1) at 100 mA g(-1) with good cycling and rate stability. Electrochemical studies revealed a faster diffusion coefficient (1.86 x 10(-11) cm(2) s(-1)) for Li in the composite compared to the bare SnP0.94 (8.57 x 10(-14) cm(2) s(-1)), confirming the promise of this class of materials for cation storage in battery anodes.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.0c01046}, author = {Yadav, Poonam and Malik, Wahid and Dwivedi, Pravin Kumari and Jones, Lathe A. and Shelke, Manjusha V.} } @article {46856, title = {Experimental vapor-liquid phase equilibrium analysis of the binary systems of aniline with xylene isomers at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {65}, year = {2020}, month = {MAY}, pages = {2619-2624}, type = {Article}, abstract = {

In the present work, vapor-liquid phase equilibrium (VLE) analyses of binary systems of aniline with four isomers of xylene, comprising p-xylene, m-xylene, o-xylene, and ethylbenzene, are reported at 93.13 kPa. The experimental VLE data was generated in a dynamic circulating vapor-liquid, and the data was found thermodynamically consistent using the Van Ness point-to-point consistency test. The experimental VLE data was regressed with the Wilson, NRTL, and UNIQUAC activity coefficient models to obtain the binary interaction parameters. No azeotropic or close-boiling behavior was observed in any of the binary pair, and these pairs were found suitable for separation through a conventional distillation method.

}, issn = {0021-9568}, doi = {10.1021/acs.jced.0c00019}, author = {Yadav, Satyajeet S. and Mali, Nilesh A. and Joshi, Sunil S.} } @article {46870, title = {Exploring magnetic XY behavior in a quasi-2D anisotropic triangular lattice of Cu(II) by functionalized graphene}, journal = {Inorganic Chemistry}, volume = {59}, year = {2020}, month = {MAY }, pages = {6214-6219}, type = {Article}, abstract = {

Study on magnetism in two-dimensional (2D) spin-lattices is advancing rapidly. In this work, phase-pure botallackite (Bo) (Cu-2(OH)(3)Br), a quasi-2D S = 1/2 anisotropic triangular spin-lattice is stabilized over 2D reduced graphene oxide (rGO) nanosheets via simple oxidation-reduction reaction chemistry. In comparison to polycrystalline Bo, such an anchoring resulted in the oriented growth of Bo crystallites in the Bo-rGO system. The Bo-rGO nanocomposite was found to be magnetically active with a Neel transition at 8.9 K, crossing over to possible XY anisotropy at similar to 5 K-as revealed by complementary dc and ac susceptibility measurements-an unprecedented observation in the field assigned to an interfacial effect. This work demonstrates the potential usage of nonmagnetic 2D functionalized graphene to significantly modulate the magnetic properties of 2D spin-lattices.

}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.0c00315}, author = {Gupta, Kriti and Dadwal, Arun and Jha, Plawan Kumar and Jain, Anil and Yusuf, S. M. and Joy, Pattayil A. and Ballav, Nirmalya} } @article {46911, title = {Fe3+ stabilized 3D cross-linked glycine-melamine formaldehyde networks as precursor for highly efficient oxygen reduction catalyst in alkaline media}, journal = {Materials Letters}, volume = {264}, year = {2020}, month = {APR 1}, pages = {127365}, type = {Article}, abstract = {

Development of inexpensive oxygen reduction electrocatalyst with high activity and durability is very important. Herein, iron carbide encapsulated pod-like graphitic carbon structures were prepared by simple pyrolysis involving Fe-glycine complex integrated melamine-formaldehyde resin precursor. The best catalyst among those studied, Fe-Gly 2 MF-C, possessing high degree of graphitization (I-D /I-G = 0.99) and enhanced specific surface area (205 m(2)/g) exhibited the highest ORR activity with a half-wave potential of 0.80 V in alkaline medium through the four-electron reduction pathway. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {fuel cell, Graphitic carbon alloy, Iron carbide, ORR}, issn = {0167-577X}, doi = {10.1016/j.matlet.2020.127365}, author = {Kottarathil, Shijina and Illathvalappil, Rajith and Nisa, S. and Sailaja, G. S. and Mohamed, Peer A. and Nair, Balagopal N. and Gopinathan, Anilkumar M. and Kurungot, Sreekumar and Yamaguchi, Takeo and Hareesh, U. S.} } @article {46850, title = {Functionalized magnetic nanosized materials for efficient biodiesel synthesis via acid-base/enzyme catalysis}, journal = {Green Chemistry}, volume = {22}, year = {2020}, month = {MAY}, pages = {2977-3012}, type = {Review}, abstract = {

According to the principles of green chemistry, the rapid recovery and reuse of catalysts after a catalytic reaction are important factors to realize the sustainable management of chemical production processes. The functionalization of magnetic nanoparticles is the basis for the efficient separation of heterogeneous catalysts from the reaction system by using the magnetic separation technology as well as for effectively bridging heterogeneous and homogeneous catalytic processes. This can considerably improve the production efficiency and reduce energy consumption as well. Owing to important applications as a potential biofuel or fuel additive, the synthesis of biodiesel mainly from low-cost biomass feedstocks has received considerable attention in the current biorefinery research. A simple synthesis process coupled with the application of functionalized magnetic catalysts can remarkably reduce the production cost and minimize waste generation, thereby promoting the potential development of green catalytic processes for the large-scale synthesis of biodiesel. In this review, the preparation methods, structural and performance control, and protection and functionalization of magnetic nanoparticles as well as the consequent catalytic effects in the synthesis of biodiesel (mainly long-chain fatty acid methyl esters) have been reported. In addition, various representative reaction mechanisms are discussed, emphasizing the existing challenges and prospects of industrialization.

}, issn = {1463-9262}, doi = {10.1039/d0gc00924e}, author = {Wang, Anping and Sudarsanam, Putla and Xu, Yufei and Zhang, Heng and Li, Hu and Yang, Song} } @article {46835, title = {Generation and evaluation of pharmacologically relevant drug-drug cocrystal for gout therapy}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {JUN }, pages = {3577-3583}, type = {Article}, abstract = {

The present study reports a novel drug-drug cocrystal of febuxostat and piroxicam for the treatment of gout. Single crystal X-ray diffraction revealed a monoclinic system with P2(1)/c space group. The prepared cocrystal enhanced the solubility of febuxostat and piroxicam and improved the dissolution rate of piroxicam in pH 6.8 as compared to the pure drug. Further, the compressibility assessment of cocrystal by Aulton and Wells method confirmed its plastic behavior and suitability for direct compression.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.0c00106}, author = {Modani, Sheela and Gunnam, Anilkumar and Yadav, Balvant and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {46977, title = {Influence of gold nanorods on the structure and photonic bandgap in a twist grain boundary phase with smectic C* blocks}, journal = {Journal of Molecular Liquids}, volume = {299}, year = {2020}, month = {FEB }, pages = {112117}, type = {Article}, abstract = {

We describe the first report of the influence of gold nanorods (GNR) on the induced twist grain boundary smectic C* (TGBC*) phase in a binary mixture of achiral bent-core and chiral linear liquid crystals. The GNR concentration-dependent phase diagram of these nanocomposites shows that the thermal range of this twist grain boundary phase having smectic C* blocks phase increases by 50\% for an intermediate composition compared to that for the host binary mixture without nanorods. The inclusion of the nanorods is seen to have substantial effect on the structural and photonic bandgap features of the TGBC* phase. For example, the helical periodidty gets altered in all the three dimensions: while those within the block undergo a huge increase, the one which is orthogonal to the blocks, shrinks. The spacing of the square grid pattern arising normal to the TGB helix direction increases for the nanocomposites getting even doubled for a certain composition, a feature evidenced by optical microscopy as well as optical diffraction. Xray diffraction clearly brings out the feature that the presence of GNR alters the thermal character of the transition between the TGBC* and the cholesteric phase. Quantitative analysis of the data indicates that the system would remain in the vicinity of a possible tricritical point, a behavior having wider ramifications to understand the underlying critical phenomenon. Based on the experimental observations, and capturing the essence of the reported adaptive defect core targeting mechanism we propose a model wherein GNRs get confined in the grain boundary region. This feature offers a potential to have periodic and anisotropic plasmonic structure arising out of the synergetic interactions between the metal nanorod and the twisted grain boundary structure. (C) 2019 Elsevier B.V. All rights reserved.

}, keywords = {3D photonic bandgap, Gold nanorods, Induced phase, TGBC* phase, Tricritical phenomena}, issn = {0167-7322}, doi = {10.1016/j.molliq.2019.112117}, author = {Sahoo, Rajalaxmi and Rao, D. S. Shankar and Hiremath, Uma S. and Yelamaggad, V. C. and Shinde, Pravin and Bhagavatula L. V. Prasad and Prasad, S. Krishna} } @article {46745, title = {Iron-catalyzed direct julia-type olefination of alcohols}, journal = {Journal of Organic Chemistry}, volume = {85}, year = {2020}, month = {AUG }, pages = {9876-9886}, type = {Article}, abstract = {

Herein, we report an iron-catalyzed, convenient, and expedient strategy for the synthesis of styrene and naphthalene derivatives with the liberation of dihydrogen. The use of a catalyst derived from an earth-abundant metal provides a sustainable strategy to olefins. This method exhibits wide substrate scope (primary and secondary alcohols) functional group tolerance amino, nitro, halo, alkoxy, thiomethoxy, and S- and N-heterocyclic compounds) that can be scaled up. The unprecedented synthesis of 1-methyl naphthalenes proceeds via tandem methenylation/double dehydrogenation. Mechanistic study shows that the cleavage of the C-H bond of alcohol is the rate-determining step.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.0c01173}, author = {Landge, Vinod G. and Babu, Reshma and Yadav, Vinita and Subaramanian, Murugan and Gupta, Virendrakumar and Balaraman, Ekambaram} } @article {46993, title = {Manganese-catalyzed alpha-olefination of nitriles with secondary alcohols}, journal = {ACS Catalysis}, volume = {10}, year = {2020}, month = {JAN}, pages = {947-954}, type = {Article}, abstract = {

An expedient catalytic approach for alpha-olefination of nitriles using secondary alcohols with the liberation of molecular hydrogen and water as the only byproducts is reported. This reaction is catalyzed by a molecularly defined manganese(I) pincer complex and operates in the absence of any hydrogen acceptors. A broad range of substrates including cyclic, acyclic, and benzylic alcohols, as well as various nitrile derivatives, such as arylmethyl and heteroarylmethyl nitriles, are employed in the reaction to provide a diverse range of alpha-vinyl nitriles in good to excellent yields. Mechanistic studies showed that the reaction proceeds via dehydrogenative pathway and the activation of alpha(C-H) bond of the alcohol is the rate-determining step.

}, keywords = {acceptorless dehydrogenation, Alcohol, alpha-olefination, Hydrogen, manganese}, issn = {2155-5435}, doi = {10.1021/acscatal.9b02811}, author = {Yadav, Vinita and Landge, Vinod G. and Subaramanian, Murugan and Balaraman, Ekambaram} } @article {46854, title = {Novel synthesis of 3-((benzo[d]thiazol-2-ylamino)(phenyl)methyl)-4-hydroxy-1-methylquinol in-2(1H)-one via consecutive C-C and C-N bond formation in water}, journal = {Research on Chemical Intermediates}, volume = {46}, year = {2020}, month = {AUG}, pages = {3801-3815}, type = {Article}, abstract = {

A simple, efficient, and eco-friendly protocol has been developed for the synthesis of novel 3-((benzo[d]thiazol-2-ylamino)(4-methoxyphenyl)methyl)-4-hydroxy-1-met hylquinolin-2(1H)-one derivatives using a one-pot C-C and C-N bond forming strategy from the reaction of 4-hydroxy-1-methylquinolin-2(1H)-one, 2-aminobenzothiazole and aromatic aldehydes in aqueous solvent without using any metal catalyst. Several advantages of this protocol include its operational simplicity, short reaction time, mild reaction condition, efficient utilization of all the reactants, wide functional group tolerance, using water as an environmentally friendly solvent and non-chromatographic purification procedure. [GRAPHICS] .

}, keywords = {4-Hydroxy-1-methylquinolin-2(1H)-one, Green solvent, Multicomponent reactions (MCRs), Quinolines, Thiazole}, issn = {0922-6168}, doi = {10.1007/s11164-020-04173-0, Early Access Date = MAY 2020}, author = {Yadav, Maruti B. and Vagh, Sandip S. and Jeong, Yeon Tae} } @article {47017, title = {Recent advances in plant nanobionics and nanobiosensors for toxicology applications}, journal = {Current Nanoscience}, volume = {16}, year = {2020}, month = {JAN}, pages = {27-41}, type = {Review}, abstract = {

Emerging applications in the field of nanotechnology are able to solve a gamut of problems surrounding the applications of agroecosystems and food technology. Nano Engineered Material (NEM) based nanosensors are important tools for monitoring plant signaling pathways and metabolism that arc nondestructive, minimally invasive, and can provide real-time analysis of biotic and abiotic threats for better plant health. These sensors can measure chemical flux even at the single molecule level. Therefore, plant health could be monitored through nutrient management, disease assessment, plant hormones level, environmental pollution, etc. This review provides a comprehensive account of the current trends and practices for the proposed NEM related research and its (i) structural aspect, (ii) experimental design and performance as well as (iii) mechanisms of field application in agriculture and food system. This review also discusses the possibility of integration of data from NEM based nanosensors in current and emerging trends of precision agriculture, urban farming, and plant nanobionics to adopt a sustainable approach in agriculture,

}, keywords = {agro-ecosystems, engineered nanomaterials, nanobionics, Nanosensors, nanotechnology, nanotoxicology}, issn = {1573-4137}, doi = {10.2174/1573413715666190409101305}, author = {Ansari, Mohammad Hasan Dad and Lavhale, Santosh and Kalunke, Raviraj M. and Srivastava, Prabhakar L. and Pandit, Vaibhav and Gade, Subodh and Yadav, Sanjay and Laux, Peter and Luch, Andreas and Gemmati, Donato and Zamboni, Paolo and Singh, Ajay Vikram} } @article {46715, title = {Spectroscopic evidences for the size dependent generation of pd species responsible for the low temperature CO oxidation activity on Pd-SBA-15 nanocatalyst}, journal = {Applied Catalysis B-Environmental}, volume = {272}, year = {2020}, month = {SEP }, pages = {118934}, type = {Article}, abstract = {

A comprehensive size dependent CO oxidation activity has been demonstrated for Pd-SBA-15 catalysts with Pd NPs of varying sizes such as 1-2, 4-6 and 7-10 nm. Pd-SBA-15 catalyst with smallest sized NPs (Pd-S-N) has been synthesized by modified deposition precipitation method recently developed in our lab. Pd-S-N catalyst (reduced at 400 degrees C) demonstrated CO oxidation activity with lower light off temperature (50 degrees C), clearly one of the best reported for a Pd-silica system. A detailed XPS and in-situ DRIFTS analyses further supported by XAS and DFT calculations reveal the presence of easily decomposable highvalent Pd-oxide on co-ordinatively unsaturated Pd sites (Pdcus). Weak binding of CO on Pdcus sites in small Pd NPs leaving sites for oxygen activation is attributed to the low temperature activity of Pd-S-N for CO oxidation.

}, keywords = {CO oxidation, high-valent Pd species, Pd nanoparticles, SBA-15, under coordinated Pd atoms}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2020.118934}, author = {Soni, Yogita and Pradhan, Sumanta and Bamnia, Mahesh K. and Yadav, A. K. and Jha, S. N. and Bhattacharyya, D. and Khan, Tuhin Suvra and Haider, M. A. and Vinod, C. P.} } @article {46693, title = {Structural and enzymatic analysis of a dimeric cholylglycine hydrolase like acylase active on N-acyl homoserine lactones}, journal = {Biochimie}, volume = {177}, year = {2020}, month = {OCT}, pages = {108-116}, type = {Article}, abstract = {

The prevalence of substrate cross-reactivity between AHL acylases and beta-lactam acylases provides a glimpse of probable links between quorum sensing and antibiotic resistance in bacteria. Both these enzyme classes belong to the N-terminal nucleophile (Ntn)-hydrolase superfamily. Penicillin V acylases alongside bile salt hydrolases constitute the cholylglycine hydrolase (CGH) group of the Ntn-hydrolase superfamily. Here we report the ability of two acylases, Slac1 and Slac2, from the marine bacterium Shewanella loihica PV4 to hydrolyze AHLs. Three-dimensional structure of Slac1 reveals the conservation of the Ntn hydrolase fold and CGH active site, making it a unique CGH exclusively active on AHLs. Slac1homologs phylogenetically cluster separate from reported CGHs and AHL acylases, thereby representing a functionally distinct sub-class of CGH that might have evolved as an adaptation to the marine environment. We hypothesize that Slac1 could provide the structural framework for understanding this subclass, and further our understanding of the evolutionary link between AHL acylases and beta-lactam acylases. (C) 2020 Elsevier B.V. and Societe Francaise de Biochimie et Biologie Moleculaire (SFBBM). All rights reserved.

}, keywords = {AHL acylase, Cholyolglycine hydrolase, Homodimer, Ntn-fold, Shewanella loihica-PV4}, issn = {0300-9084}, doi = {10.1016/j.biochi.2020.07.017}, author = {Philem, Pushparani D. and Yadav, Yashpal and Sunder, Avinash Vellore and Ghosh, Deepanjan and Prabhune, Asmita and Ramasamy, Sureshkumar} } @article {46846, title = {Structural, electrochemical and catalytic activity of Prussian blue analogues embedded with functionalized carbon for solid state battery applications}, journal = {International Journal of Hydrogen Energy}, volume = {45}, year = {2020}, month = {MAY}, pages = {15317-15326}, type = {Article}, abstract = {

The nanoparticles of Mn-1.5[Cr(CN)(6)]center dot mH(2)O@Ni-1.5[Cr(CN)(6)]center dot nH(2)O core-shell prussian blue analogues (PBA) embedded with carbon additives (PBA-C) were synthesized and characterized as electrode material for solid state battery application. The impedance spectroscopy and cyclic voltametry were used to study the electrochemical properties by adding functionalized carbon in 1:1 proportion to improve the electrical performance. The value of room temperature electrical conductivity of core-shell PBA and core-shell nanoparticles mixed with vulcan carbon (PBA-C) are found to be 1.574 x 10(-3) and 1.92 x 10(-3) Scm(-1), respectively. Using Li2La3Zr2O12 (LZZO) electrolyte, single cell was fabricated with PBA-C material, and studied its charging-discharging cycles, which exhibits higher current density with stable performance for 400 cycles for time slots of 400 min. The study reveals that the PBA core-shell nanoparticles mixed with carbon (PBA-C) may be a potential candidate as an electrode material in the form of a single cell using LZZO electrolyte. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

}, keywords = {cyclic voltametry, Electrolyte, Prussian blue analogues (PBA), Solid state battery, XPS}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2020.03.244}, author = {Shaikh, Shabana P. S. and Bhatt, Pramod and Yusuf, S. M. and Bhange, S. N. and Bansod, Sudhakar and Abdalla, Abdalla M.} } @article {46879, title = {Structural, molecular, functional and immunological characterization of Wuchereria bancrofti-galectin}, journal = {International Journal of Biological Macromolecules}, volume = {150}, year = {2020}, month = {MAY }, pages = {206-217}, type = {Article}, abstract = {

Galectins regulate growth and differentiation of immune cells and inflammation through their carbohydrate-binding function in humans, while also play a role in parasite survival. This study focused on the galectin of lymphatic filarial parasite Wuchereria bancrofti (Wb-Gal). The multiple sequence alignment with other galectins showed that the Wb-Gal belonged to galactoside binding lectin family, particularly tandem repeat type galectin-9. A homology model of Wb-Gal was developed in the I-TASser server using high similarity 3D structures with a quality score of 89.5. Molecular docking and dynamics studies revealed that the CCRD and NCRD of Wb-Gal bind with galactose and lactose. Further, Wb-Gal was cloned into the pET28 vector, expressed in E. coli Rosetta strain and purified by affinity chromatography. In the hemagglutination assays, the rWb-Gal bound to lactose, galactose, and glucose. Indirect Enzyme-Linked Immunosorbent Assay (ELISA) using different clinical filarial sera showed that the IgG and IgM response was against Wb-Gal x very high in all filarial clinical groups, whereas the IgA and IgG2 response was minimum to negligible. There was an enhanced response of IgG1 and IgG4 antibodies in Microfilaremics (MF) cases compared to Chronic Pathology (CP) and Endemic Normal (EN) individuals. Interestingly, the IgE response was comparatively higher in EN than MF and CP. These studies show that Wb-Gal is a member of the lectin family of proteins binding to different carbohydrates and may have an important role in the pathophysiology of filarial infection which needs to be investigated in greater detail. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Filariasis, Hemagglutination assay, Immunomodulation, Wuchereria bancrofti galectin}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.02.024}, author = {Yasin, Nazeer and Laxmanappa, Hoti Sugerappa and Muddapur, Uday M. and Cheruvathur, Jennifer and Prakash, S. M. Udaya and Thulasiram, Hirekodathakallu Venkataramaiah} } @article {46946, title = {Synthesis of silver nanoparticles colloids in imidazolium halide ionic liquids and their antibacterial activities for gram-positive and gram-negative bacteria}, journal = {Chemosphere}, volume = {243}, year = {2020}, month = {MAR}, pages = {125302}, type = {Article}, abstract = {

Four 1-butyl-3-methylimidazolium halide ionic liquids were synthesized via metathesis and anion exchange reactions. Silver nanoparticles (AgNPs) colloids were synthesized in four ionic liquids in the pressurized reactor by reduction of silver nitrate with hydrogen gas, without adding solvents or stabilizing agents. Antibacterial activities of base ionic liquids and AgNPs colloids in ionic liquids were reviewed by well-diffusion method for gram-positive Bacillus cereus (NCIM-2155) and gram-negative Escherichia coli (NCIM-2931) bacteria. Antibacterial activities of ionic liquids and AgNPs colloids in ionic liquids were observed to be controlled by ionic liquids anions and AgNPs particle size. The 1 -butyl-3-methylimidazolium iodide ionic liquid exhibited higher antibacterial activities among the studied ionic liquids. Further, the presence of AgNPs in 1-butyl-3-methylimidazolium iodide, ionic liquid enhanced its antibacterial activity for Bacillus cereus and Escherichia coli bacteria. (C) 2019 Elsevier Ltd. All rights reserved.

}, keywords = {Anion effect, antibacterial activity, Imidazolium halides, ionic liquids, silver nanoparticles}, issn = {0045-6535}, doi = {10.1016/j.chemosphere.2019.125302}, author = {Patil, Virendra and Mahajan, Swapnil and Kulkarni, Mohan and Patil, Kashinath and Rode, Chandrashekhar and Coronas, Alberto and Yi, Gi-Ra} } @article {46956, title = {Tale of biphenyl and terphenyl substituents for structurally diverse ketiminato magnesium, calcium and germanium complexes}, journal = {Chemistry-An Asian Journal}, volume = {15}, year = {2020}, month = {MAR}, pages = {820-827}, type = {Article}, abstract = {

In this paper, we have used two N,O-ketiminato ligands (L1 and L2) with biphenyl and terphenyl substituent on the nitrogen atom. Deprotonation of L1 with KN(SiMe3)(2) and subsequent reaction with MgI2 led to a homoleptic dinuclear magnesium complex (1) with a Mg2O2 four-membered ring. Deprotonation with nBuLi and subsequent reaction with MgI2 afforded a unusual dinuclear magnesium complex (2) with a Mg2O2 ring. Extension of the ligand for calcium resulted in a trinuclear calcium complex (3) with six four-membered Ca2O2 rings. We could not isolate any chelating complex when L2 was used as a ligand, and only oxygen bound magnesium (4) and calcium (5) adducts were isolated. DFT studies were performed to understand this dissimilar behavior. More diverse results were obtained when lithiated L1 and L2 were treated with germanium dichloride. We were able to stabilize a monomeric germylene monochloride (7) with L1. However, with L2, an unusual ligand scrambling, and a C-C coupling take place, leading to the formation of a secondary carbocation with GeCl3- as a counter-anion (8). Besides, a germanium dichloride adduct (9) bound to the oxygen center of the ligand was obtained as the minor product.

}, keywords = {calcium, Germylene, ligand, Magnesium, X-ray Structure}, issn = {1861-4728}, doi = {10.1002/asia.201901801, Early Access Date = FEB 2020}, author = {Kumar, Rohit and Yadav, Sandeep and Gour, Kritika and Sangtani, Ekta and Ranjan Dash, Soumya and Raja, Abhishekram and Vanka, Kumar and Gonnade, Rajesh G. and Sen, Sakya S.} } @article {46770, title = {Template assisted synthesis of Ni,N co-doped porous carbon from Ni incorporated ZIF-8 frameworks for electrocatalytic oxygen reduction reaction}, journal = {New Journal of Chemistry}, volume = {44}, year = {2020}, month = {JUL }, pages = {12343-12354}, type = {Article}, abstract = {

A heteroatom doped porous carbon electrocatalyst with enhanced oxygen reduction reaction (ORR) performance in alkaline medium was obtained by high temperature treatment of Ni incorporated ZIF-8 frameworks and its composite with g-C(3)N(4)as a supporting matrix template. The morphology and porosity of this heteroatom containing carbon were tuned by varying the Ni : Zn molar ratio in Ni/Zn ZIF-8 and Ni/Zn ZIF-8@g-C(3)N(4)composites. The template aided synthetic strategy using g-C(3)N(4)helped in the controlled decomposition of composites leading to a heteroporous sheet like architecture with increased nitrogen content. The Ni/Zn ZIF-8 sample on heat treatment in the 800-1000 degrees C temperature range led to the formation of Ni,N co-doped porous carbon (Ni-NPC) with Ni-C active sites. The defective sites induced by nickel carbide along with the distributed N atoms on the carbon surface enabled active O(2)adsorption sites. The high surface area, high degree of graphitisation as well as the defects created by well dispersed N and Ni on porous carbon matrices favoured charge separation leading to higher electrochemical ORR activity. The Ni,N co-doped carbon catalyst in alkaline medium exhibited a limiting current density of 5.2 mA cm(-2)with a half-wave potential of 0.76 Vvs.RHE in 0.1 M KOH. The catalyst also showed improved methanol tolerance and better stability compared to the standard Pt/C catalyst.

}, issn = {1144-0546}, doi = {10.1039/d0nj01373k}, author = {Priya K., Vaishna and Thomas, Minju and Illathvalappil, Rajith and K., Shijina and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {46743, title = {Wide thermal range, exclusive occurrence of technically significant chiral nematic phase: synthesis and mesomorphism of cholesterol-based non-symmetric dimers}, journal = {Bulletin of Materials Science}, volume = {43}, year = {2020}, month = {AUG }, pages = {188}, type = {Article}, abstract = {

Fifteen new non-symmetric chiral dimers belonging to three different series have been synthesized and evaluated for their mesomorphic properties. They are formed by interlinking cholesterol with salicylaldimine (SAN) cores (with reverse imine groups) via an omega-oxyalkanoyloxy spacer. Within a series, the length of the terminaln-alkoxy tails has been varied for a fixed even-parity spacer. Three even-parity spacers such as 4-oxybutanoyloxy, 6-oxyhexanoyloxy and 8-oxyoctanoyloxy have been used to join two cores, whereas the terminal tails such asn-butyloxy,n-hexyloxy,n-octyloxy,n-decyloxy andn-dodecyloxy chains have been attached to the SAN core. Microscopic and calorimetric experimental results show that all the dimers behave identically exhibiting the chiral nematic (N*) phase solely, which was authenticated by powder X-ray diffraction studies carried out on some selected samples. In the vast majority of the cases, this phase is thermodynamically stable, and while cooling, it exists over a wide thermal range covering room temperature (RT) due to supercooling. This finding is notable given the fact that the N* phase possesses technologically significant optical properties. At RT, the N* phase displayed one of the iridescent colours characteristically caused by interference and diffraction of the reflected and scattered light. A comparative study reveals that the lengths of both the terminal chain and central spacer influence the clearing temperature of the dimers, and also the temperature range of the N* phase. The selective reflection measurements revealed that the pitch of the N* phase is either temperature sensitive or temperature insensitive. Temperature-dependent circular dichroism (CD) spectra were recorded for the planar texture of the N* phase formed by a dimer, as a representative case. The presence of an intense negative CD band suggests the left-handed screw sense of the N* phase helix.

}, keywords = {CD activity, cholesteric phase, dimers, liquid crystals, selective reflection}, issn = {0250-4707}, doi = {10.1007/s12034-020-02120-8}, author = {Nayak, Rashmi Ashwathama and Bhat, Sachin A. and Rao, D. S. Shankar and Yelamaggad, V. C.} } @article {47341, title = {Bimetallic ZnFe2O4 nanosheets prepared via electrodeposition as binder-free high-performance supercapacitor electrodes}, journal = {Applied Surface Science}, volume = {559}, year = {2021}, month = {SEP }, pages = {149951}, type = {Article}, abstract = {

Binder-free bimetallic ZnFe2O4 nanosheets were fabricated using one-step electrodeposition, which facilitated excellent electrical contact between the ZnFe2O4 nanosheets and the nickel substrate. The resultant numerous ZnFe2O4 nanosheets with their cubic spinel structures promote interfacial activity to enhance the electrochemical and Faradaic redox reactions. The metallic Zn and Fe from the cubic spinel structure of ZnFe2O4 attract electrolytic ions and increase the energy-storage capability, thus yielding a specific capacitance of 1093 F.g(-1) at a current rate of 1 A.g(-1). Different samples were prepared by varying the amount of metal salts in the electrodeposition solution while maintaining a constant ZnNt:FeSO4 concentration ratio of 1:2 for all cases. The optimal electrode composition, which yielded an energy density of 54 Wh.kg(-1) and a capacitance retention of 93.5\% at N = 5000 charge-discharge cycles, was identified.

}, keywords = {Bimetallic, Electrodeposition, Energy storage device, supercapacitor, ZnFe2O4 nanosheet}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2021.149951}, author = {Joshi, Bhavana and Samuel, Edmund and Park, Chanwoo and Kim, Yongil and Lee, Hae-Seok and Yoon, Sam S.} } @article {47045, title = {Chemistry, anti-diabetic activity and structural analysis of substituted dihydropyrimidine analogues}, journal = {Journal of Molecular Structure}, volume = {1227}, year = {2021}, month = {MAR }, pages = {129412}, type = {Article}, abstract = {

In an effort to identify an anti-diabetic agent, a series of methyl/ethyl 4-(hydroxyphenyl)-6-methyl-2-oxo/thioxo-1,2,3,4 tetrahydropyrimidine-5-carboxylate analogues (4a-h) have been synthesized, purified, and characterized by using Fourier-Transform Infrared Spectroscopy (FT-IR) and NMR (H-1 and C-13). The synthesized compounds were screened for anti-hyperglycemic activity using Streptozotocin (STZ) induced diabetic rat model. The anti-hyperglycemic activity of dihydropyrimidine (DHPM) compound is mainly analyzed with the variation of substituents present on the phenyl ring and urea/thiourea group on pharmacophoric features. Further, the crystal structure and supramolecular characteristics of two compounds 4c and 4f were analyzed through a single-crystal X-ray method and the Hirshfeld Surface Analysis, which shows hydrogen bonding through N-H center dot center dot center dot O and N-H center dot center dot center dot S interactions with the formation of ring motif in the crystal structure. It is interesting to note that among the title compounds, the 4a, 4e, 4f, and 4g significantly displayed a better hypoglycemic effect in vivo rat model study. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Dihydropyrimidine (DHPM), Hypoglycemia, Streptozotocin (STZ), Type-2 diabetes mellitus (T2DM)}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2020.129412}, author = {Bairagi, Keshab M. and Younis, Nancy Safwat and Emeka, Promise Madu and Venugopala, Katharigatta N. and Alwassil, I, Osama and Khalil, Hany Ezzat and Sangtani, Ekta and Gonnade, Rajesh G. and Mohanlall, Viresh and Nayak, Susanta K.} } @article {47373, title = {Chronic systemic exposure to IL6 leads to deregulation of glycolysis and fat accumulation in the zebrafish liver}, journal = {Biochimica ET Biophysica Acta-Molecular and Cell Biology of Lipids}, volume = {1866}, year = {2021}, month = {MAY}, pages = {158905}, type = {Article}, abstract = {

Inflammation is a constant in Non-Alcoholic Fatty Liver Disease (NAFLD), although their relationship is unclear. In a transgenic zebrafish system with chronic systemic overexpression of human IL6 (IL6-OE) we show that inflammation can cause intra-hepatic accumulation of triglycerides. Transcriptomics and proteomics analysis of the IL6-OE liver revealed a deregulation of glycolysis/gluconeogenesis pathway, especially a striking down regulation of the glycolytic enzyme aldolase b. Metabolomics analysis by mass spectrometry showed accumulation of hexose monophosphates and their derivatives, which can act as precursors for triglyceride synthesis. Our results suggest that IL6-driven repression of glycolysis/gluconeogenesis, specifically aldolase b, may be a novel mechanism for fatty liver. This mechanism may be relevant for NAFLD in lean individuals, an emerging class of NAFLD prevalent more in Asian Indian populations.

}, keywords = {Aldolase b, DHAP, Inflammation, Interleukin 6, Lean NAFLD, Non-alcoholic fatty liver}, issn = {1388-1981}, doi = {10.1016/j.bbalip.2021.158905}, author = {Singh, Manoj K. and Jayarajan, Rijith and Varshney, Swati and Upadrasta, Sindhuri and Singh, Archana and Yadav, Rajni and Scaria, Vinod and Sengupta, Shantanu and Shanmugam, Dhanasekaran and Shalimar and Sivasubbu, Sridhar and Gandotra, Sheetal and Sachidanandan, Chetana} } @article {47449, title = {Comparison of glycoprofiles of rituximab versions licensed for sale in India and an analytical approach for quality assessment}, journal = {Journal of Proteomics }, volume = {244}, year = {2021}, month = {JUL}, pages = {104267}, type = {Article}, abstract = {

Glycosylation affects clinical efficacy and safety; therefore, is a critical quality attribute of therapeutic monoclonal antibodies. Glycans are often labile and complex in patterns, giving rise to macro- and micro-heterogeneity. Recombinant production, diverse geographical locations, associated transportation and storage conditions further compound the problem. Two-way studies comparing glycoprofile of the originator and its given biosimilar are aplenty. However, the extent of analytical variation and similarity in glycoprofile across all approved versions of a drug is hardly explored. Using UHPLC and mass spectrometry, we compared the glycoprofiles of eight rituximab drug samples licensed for sale in India. While the types of glycans were found identical, the abundance of some glycans varied significantly within the tested population. The quality range of glycosylation parameters of the tested sample population differed significantly from the previously established values for US/EU licensed rituximab. As the mean abundance of the 90\% of identified glycans falls within {\textpm}3SD, the extent of mutual variations amongst tested lots is less significant compared to the extreme deviation from previously established QR limits. Thus, we propose this approach as an orthogonal method to capture glycan variations in licensed versions of mAbs for quality surveillance and in cases where originator samples{\textquoteright} are limiting. SIGNIFICANCE: As fluctuation in glycosylation may be of clinical significance, we identify that a one-to-one comparison with originator alone is insufficient in sensing the extent of variations in glycosylation parameters in licensed biosimilars of a given therapeutic mAb. Here we propose that future biosimilarity analysis may include an orthogonal approach of generating an additional combined QR range representing variations across the originator and its biosimilars. The glycosylation profiles of eight rituximab drug samples of different make obtained from the point of sale in India were found identical amongst the tested rituximab versions. However, the QR limits corresponding to important glycosylation parameters differed significantly across all tested samples from the previously established QR limits of US- and EU-licensed rituximab in statistical terms. Such an approach may be useful in defining the true range of glycan variations in licensed versions of therapeutic mAbs.

}, doi = {10.1016/j.jprot.2021.104267}, author = {Kaur, Tejinder and Shukla, Bhupendra Nath and Yadav, Vinay Kumar and Kulkarni, Mahesh J. and Rao, Alka} } @article {47700, title = {Cotton fabric decorated with manganese oxide nanorods as a supercapacitive flexible electrode for wearable electronics}, journal = {Applied Surface Science}, volume = {568}, year = {2021}, month = {DEC 1}, pages = {150968}, type = {Article}, abstract = {We present the fabrication (using a hydrothermal process) and the properties of wearable fabrics decorated with ultrathin manganese oxide (MnO2) nanorods for supercapacitor applications. The superior mechanical durability of the supercapacitor was confirmed by cyclic voltammetry (CV) curves, which showed little change during 1000 bending cycles. The pseudocapacitive properties of the ultrathin MnO2 nanorods were confirmed by recording the CV curves at various scan rates. The galvanostatic charge-discharge curves at various specific currents confirmed the pseudocapacitance of MnO2. The ultrathin MnO2 nanorods exhibited a superior capacitance of 508 F.g(-1) and an energy density of 35.3 Wh.kg(-1). The MnO2 electrode with optimal properties demonstrated stable long-term cycling performance with 90\% retention after 10,000 galvanostatic cycles.}, keywords = {Cotton fabric, Manganese oxide, Ultrafine nanostructures, Wearable supercapacitors}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2021.150968}, author = {Samuel, Edmund and Joshi, Bhavana and Kim, Yongil and Park, Chanwoo and Aldalbahi, Ali and El-Newehy, Mohamed and Lee, Hae-Seok and Yoon, Sam S.} } @article {47741, title = {Density functional theory-based study of the magnetic and optical properties of PbMO3 (M = Cr, Fe) using the modified BeckeJohnson mBJ functional (vol 128, pg 275, 2019)}, journal = {Journal of Physics and Chemistry of Solids}, volume = {158}, year = {2021}, month = {NOV}, pages = {110225}, type = {Correction}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2021.110225}, author = {Mahmood, Q. and Hassan, M. and Bhamu, K. C. and Yaseen, M. and Ramay, S. M. and Mahmood, A.} } @article {47457, title = {Design, synthesis, and structural analysis of cladosporin-based inhibitors of malaria parasites}, journal = {ACS Infectious Diseases}, volume = {7}, year = {2021}, month = {JUL}, pages = {1777{\textendash}1794}, type = {Article}, abstract = {

Here we have described a systematic structure activity relationship (SAR) of a set of compounds inspired from cladosporin, a tool compound that targets parasite (Plasmodium falciparum) lysyl tRNA synthetase (KRS). Four sets of analogues, synthesized based on point changes in the chemical scaffold of cladosporin and other logical modifications and hybridizations, were assessed using high throughput enzymatic and parasitic assays along with\ in vitro\ pharmacokinetics. Co-crystallization of the most potent compound in our series (CL-2) with\ PfKRS revealed its structural basis of enzymatic binding and potency. Further, we report that\ CL-2\ has performed better than cladosporin in terms of metabolic stability. It thus represents a new lead for further optimization toward the development of antimalarial drugs. Collectively, along with a lead compound, the series offers insights on how even the slightest chemical modification might play an important role in enhancing or decreasing the potency of a chemical scaffold.

}, doi = {10.1021/acsinfecdis.1c00092}, author = {Babbar, Palak and Das, Pronay and Manickam, Yogavel and Mankad, Yash and Yadav, Swati and Parvez, Suhel and Sharma, Amit and Reddy, Srinivasa} } @article {47441, title = {Flexible metallized carbon nanofibers decorated with two-dimensional NiGa2S4 nanosheets as supercapacitor electrodes}, journal = {Chemical Engineering Journal }, volume = {420}, year = {2021}, month = {SEP }, pages = {130497}, type = {Article}, abstract = {

Herein, high-power flexible supercapacitor electrodes were fabricated by decorating Ni-electroplated carbon nanofibers (Ni@CNF) with two-dimensional NiGa2S4\ nanosheets. The electrical conductivity of carbon nanofibers was enhanced by the addition of nickel, and the energy storage capability was enhanced by decoration with NiGa2S4. The impact of metal (Ni/Ga) ratio on the overall electrochemical performance of the supercapacitor was studied by varying the Ga concentration. The NiGa2S4\ nanosheets promoted diffusion of the electrolyte into the electrode, thereby improving the electrochemical activity. The nanosheets also intensified the charge transfer rate within the composite electrode, which contributed to the overall improvement in the electrochemical performance. The optimal Ga concentration was the concentration at which the specific capacitance was the highest at 488 F{\textperiodcentered}g-1\ with a potential window of 1.1\ V and current rate of 0.5 A{\textperiodcentered}g-1. The long-term stability test revealed that the capacitance retention of the electrode with this optimal Ni/Ga ratio was 109\% after 20,000 cycles. This flexible supercapacitor electrode was subjected to 2000 bending cycles, and the corresponding cyclic voltammetry performance was assessed. In combination, the outstanding electrochemical performance and durable mechanical properties render the NiGa2S4/Ni@CNF electrode highly suitable for flexible energy storage applications.

}, doi = {10.1016/j.cej.2021.130497}, author = {Kim, Yongil and Samuel, Edmund and Joshi, Bhavana and Park, Chanwoo and Lee, Hae-Seok and Yoon, Sam S.} } @article {47132, title = {Functional metagenomic landscape of polluted river reveals potential genes involved in degradation of xenobiotic pollutants}, journal = {Environmental Research}, volume = {192}, year = {2021}, month = {JAN}, pages = {110332}, type = {Article}, abstract = {

Rapid industrialization contributes substantially to xenobiotic pollutants in rivers. As a result, most of the rivers traversing urban settlements are in significantly deteriorated conditions. These pollutants are recalcitrant, requiring robust catabolic machinery for their complete transformation into bioavailable and non-toxic byproducts. Microbes are versatile dwellers that could adapt to such contaminants by using them as a source of nutrients during growth. However, efficient bioremediation requires an in-depth knowledge of microbial diversity and their metabolism related genes in the polluted niches. We employed MinION shotgun sequencing, to comprehend the biodegradation related genes and their function potential operating in the polluted urban riverine system of Western India. A vast number of catabolic genes were detected for the xenobiotic pollutants such as Benzoate, Nitrotoluene, Aminobenzoate, Drug metabolism, and Polycyclic Aromatic Hydrocarbons. Aerobic, and anaerobic catabolism genes, were mapped for their ability of degradation of xenobiotics. Interestingly, catabolism profiles of multiple aromatic compounds culminated into the Benzoate degradation pathway, suggesting it as a plausible central pathway for the autochthonous bacterial communities. Further mapping with RemeDB database, predicted plastic and dye degrading enzymes. Moreover, the diversity indices for the pollutant degrading enzymes suggested little variations (R-2 value of 18\%) between the city and non-city (outskirts of city limits) riverine stretch indicating the impact of industrialization in the outskirts of the city stretch as well. Altogether, this study would serve as a preliminary baseline for future explorations concerning river cleaning programs and also exploiting such microbes for bioremediation applications.

}, keywords = {Benzoate, Bioremediation, MinION, Riverine system, Xenobiotics}, issn = {0013-9351}, doi = {10.1016/j.envres.2020.110332}, author = {Yadav, Rakeshkumar and Rajput, Vinay and Dharne, Mahesh} } @article {47689, title = {Hydrogenolysis of benzofuran using aqueous ethanol solution over graphite-supported platinum catalyst}, journal = {Journal of the Indian Chemical Society}, volume = {98}, year = {2021}, month = {FEB}, pages = {100021}, type = {Article}, abstract = {Graphite-supported platinum catalysts (Pt/G) were highly active for the hydrogenolysis of benzofuran to o-ethylphenol in aqueous ethanol solution at 523 K without using any external hydrogen gas. The hydrogenolysis activities and selectivity to o-ethylphenol in ethanol solution over Pt/G were higher than those with a conventional method using externally supplied hydrogen gas. Both water and ethanol were indispensable for the hydrogenolysis in aqueous ethanol solution at 523 K.}, keywords = {Biomass conversion, Graphite support, Hydrogenolysis, platinum catalysts}, issn = {0019-4522}, doi = {10.1016/j.jics.2021.100021}, author = {Hiraishi, Yushi and Minakawa, Naohiro and Taniguchi, Kenkichi and Nagasawa, Yoshiyuki and Nanao, Hidetaka and Rode, V, Chandrashekhar and Sato, Osamu and Yamaguchi, Aritomo and Shirai, Masayuki} } @article {47072, title = {Improving the optical and thermoelectric properties of Cs2InAgCl6 with heavy substitutional doping: a DFT insight}, journal = {RSC Advances}, volume = {11}, year = {2021}, month = {FEB }, pages = {5521-5528}, type = {Article}, abstract = {

The next-generation indium-based lead-free halide material Cs2InAgCl6 is promising for photovoltaic applications due to its good air stability and non-toxic behavior. However, its wide bandgap (\>3 eV) is not suitable for the solar spectrum and hence reduces its photoelectronic efficiency for device applications. Here we report a significant bandgap reduction from 2.85 eV to 0.65 eV via substitutional doping and its effects on the optoelectronic and opto-thermoelectric properties from a first-principles study. The results predict that Sn/Pb and Ga and Cu co-doping will enhance the density of states significantly near the valence band maximum (VBM) and thus reduce the bandgap via shifting the VBM upward, while alkali metals (K/Rb) slightly increase the bandgap. A strong absorption peak near the Shockley-Queisser limit is observed in the co-doped case, while in the Sn/Pb-doped case, we notice a peak in the middle of the visible region of the solar spectrum. The nature of the bandgap is indirect with Cu-Ga/Pb/Sn doping, and a significant reduction in the bandgap, from 2.85 eV to 0.65 eV, is observed in the case of Ga-Cu co-doping. We observe a significant increase in the power factor (PF) (2.03 mW m(-1) K-2) for the n-type carrier after Pb-doping, which is similar to 3.5 times higher than in the pristine case (0.6 mW m (-1) K-2) at 500 K.

}, doi = {10.1039/d0ra01840f}, author = {Bhamu, K. C. and Haque, Enamul and Praveen, C. S. and Kumar, Nandha and Yumnam, G. and Hossain, Md. Anwar and Sharma, Gautam} } @article {47125, title = {In silico studies, synthesis and antitubercular activity of some novel quinoline - azitidinone derivatives}, journal = {Current Computer-Aided Drug Design}, volume = {17}, year = {2021}, month = {JAN}, pages = {134-143}, type = {Article}, abstract = {

Background: Diarylquinolines like Bedaquiline have shown promising antitubercular activity by their action of Mycobacterial ATPase. Objective: The structural features necessary for a good antitubercular activity for a series of quinoline derivatives were explored through computational chemistry tools like QSAR and combinatorial library generation. In the current study, 3-Chloro-4-(2-mercaptoquinoline-3-yl)-1-substitutedphenylazitidin-2-one derivatives have been designed and synthesized based on molecular modeling studies as anti-tubercular agents. Methods: 2D and 3D QSAR analyses were used to designed compounds having a quinoline scaffold. The synthesized compounds were evaluated against active and dormant strains of Mycobacterium tuberculosis (MTB) H37 Ra and Mycobacterium bovis BCG. The compounds were also tested for cytotoxicity against MCF-7, A549 and Panc-1 cell lines using MTT assay. The binding affinity of designed compounds was gauged by molecular docking studies. Results: Statistically significant QSAR models generated by the SA-MLR method for 2D QSAR exhibited r(2) = 0.852, q(2) = 0.811, whereas 3D QSAR with SA-kNN showed q(2) = 0.77. The synthesized compounds exhibited MIC in the range of 1.38-14.59(mu g/ml). These compounds showed some crucial interaction with MTB ATPase. Conclusion: The present study has shown some promising results which can be further explored for lead generation.

}, keywords = {combilib, Molecular docking, mycobacterial ATPase, QSAR, Quinoline}, issn = {1573-4099}, doi = {10.2174/1573409916666200129095952}, author = {Chitre, Trupti S. and Asgaonkar, Kalyani D. and Vikhe, Amrut B. and Patil, Shital M. and Garud, Dinesh R. and Khedkar, Vijay M. and Sarkar, Dhiman and Nawale, Laxman U. and Yeware, Amar} } @article {47390, title = {Insights from a pan India Sero-epidemiological survey (Phenome-India Cohort) for SARS-CoV2}, journal = {eLife}, volume = {10}, year = {2021}, month = {APR }, pages = {e66537}, type = {Article}, abstract = {

To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14\%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95\% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10\% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95\% confidence interval, p value: 2.23, 1.92-2.59, \<0.0001), use of public transport (1.79, 1.43-2.24, \<0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, \<0.0001), and B blood group (1.36, 1.15-1.61, 0.001).

}, issn = {2050-084X}, doi = {10.7554/eLife.66537}, author = {Naushin, Salwa and Sardana, Viren and Ujjainiya, Rajat and Bhatheja, Nitin and Kutum, Rintu and Bhaskar, Akash Kumar and Pradhan, Shalini and Prakash, Satyartha and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Chandak, Giriraj Ratan and Lahiri, Amit and Kar, Susanta and Mulay, Shrikant Ramesh and Mugale, Madhav Nilakanth and Srivastava, Mrigank and Khan, Shaziya and Srivastava, Anjali and Tomar, Bhawana and Veerapandian, Murugan and Venkatachalam, Ganesh and Vijayakumar, Selvamani Raja and Agarwal, Ajay and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Sundaram, Gopinath M. and Veeranna, Ravindra P. and Pal, Anirban and Agarwal, Vinay Kumar and Maurya, Anil Ku and Singh, Ranvijay Kumar and Raman, Ashok Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Venkatesan, Subramanian and Sardana, Harish Kumar and Kothari, Anamika and Jain, Rishabh and Thakur, Anupama and Parihar, Devendra Singh and Saifi, Anas and Kaur, Jasleen and Kumar, Virendra and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Singh, Praveen and Chakraborty, Rahul and Chaturvedi, Gaura and Karunakar, Pinreddy and Yadav, Rohit and Singhmar, Sunanda and Singh, Dayanidhi and Sarkar, Sharmistha and Bhattacharya, Purbasha and Acharya, Sundaram and Singh, Vandana and Verma, Shweta and Soni, Drishti and Seth, Surabhi and Vashisht, Sakshi and Thakran, Sarita and Fatima, Firdaus and Singh, Akash Pratap and Sharma, Akanksha and Sharma, Babita and Subramanian, Manikandan and Padwad, Yogendra S. and Hallan, Vipin and Patial, Vikram and Singh, Damanpreet and Tripude, Narendra Vijay and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sarkar, Jit and Ramakrishna, Sistla and Kumar, Balthu Narender and Kumar, Kiran A. and Gandhi, Sumit G. and Jamwal, Piyush Singh and Chouhan, Rekha and Jamwal, Vijay Lakshmi and Kapoor, Nitika and Ghosh, Debashish and Thakkar, Ghanshyam and Subudhi, Umakanta and Sen, Pradip and Chaudhury, Saumya Ray and Kumar, Rashmi and Gupta, Pawan and Tuli, Amit and Sharma, Deepak and Ringe, Rajesh P. and Amarnarayan, D. and Kulkarni, Mahesh and Shanmugam, Dhansekaran and Dharne, Mahesh S. and Dastager, Sayed G. and Joshi, Rakesh and Patil, Amita P. and Mahajan, Sachin N. and Khan, Abujunaid Habib and Wagh, Vasudev and Yadav, Rakesh Kumar and Khilari, Ajinkya and Bhadange, Mayuri and Chaurasiya, Arvindkumar H. and Kulsange, Shabda E. and Khairnar, Krishna and Paranjape, Shilpa and Kalita, Jatin and Sastry, Narahari G. and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, Ravi Kumar and Babu, Elapavalooru Vssk and Sukumaran, Rajeev and Nair, Aiswarya R. and Valappil, Prajeesh Kooloth and Puthiyamadam, Anoop and Velayudhanpillai, Adarsh and Chodankar, Kalpana and Damare, Samir and Madhavi, Yennapu and Aggarwal, Ved Varun and Dahiya, Sumit and Agrawal, Anurag and Dash, Debasis and Sengupta, Shantanu} } @article {47113, title = {Integrated genetic and metabolic landscapes predict vulnerabilities of temozolomide resistant glioblastoma cells}, journal = {npj Systems Biology and Applications}, volume = {7}, year = {2021}, month = {JAN }, pages = {2}, type = {Article}, abstract = {

Metabolic reprogramming and its molecular underpinnings are critical to unravel the duality of cancer cell function and chemo-resistance. Here, we use a constraints-based integrated approach to delineate the interplay between metabolism and epigenetics, hardwired in the genome, to shape temozolomide (TMZ) resistance. Differential metabolism was identified in response to TMZ at varying concentrations in both the resistant neurospheroidal (NSP) and the susceptible (U87MG) glioblastoma cell-lines. The genetic basis of this metabolic adaptation was characterized by whole exome sequencing that identified mutations in signaling pathway regulators of growth and energy metabolism. Remarkably, our integrated approach identified rewiring in glycolysis, TCA cycle, malate aspartate shunt, and oxidative phosphorylation pathways. The differential killing of TMZ resistant NSP by Rotenone at low concentrations with an IC50 value of 5 nM, three orders of magnitude lower than for U87MG that exhibited an IC50 value of 1.8 mM was thus identified using our integrated systems-based approach.

}, doi = {10.1038/s41540-020-00161-7}, author = {Immanuel, Selva Rupa Christinal and Ghanate, Avinash D. and Parmar, Dharmeshkumar S. and Yadav, Ritu and Uthup, Riya and Panchagnula, Venkateswarlu and Raghunathan, Anu} } @article {47451, title = {Metagenomic analysis of a mega-city river network reveals microbial compositional heterogeneity among urban and peri-urban river stretch}, journal = {Science of the Total Environment}, volume = {783}, year = {2021}, month = {AUG }, pages = {146960}, type = {Article}, abstract = {

The rivers in the megacities face a constant inflow of extremely polluted wastewaters from various sources, and their influence on the connected peri-urban river is still poorly understood. The riverine system in Pune consists of Rivers Mula, Ramnadi, Pawana, Mutha, and Mula-Mutha, traversing through the urban settlements of Pune before joining River Bhima in the peri-urban region. We used MinION-based metagenomic sequencing to generate a comprehensive understanding of the microbial diversity differ-ences between the urban and peri-urban zones, which has not been explored at the meta scale until date. The taxonomic analysis revealed significant enrichment of pollution indicators microbial taxa (Welsch{\textquoteright}s t-test, p \< 0.05, Benjamini-Hochberg FDR test) such as Bacteriodetes, Firmicutes, Spirochaetes, Synergistetes, Euryarcheota in the urban waters as compared to peri-urban waters. Further, the peri-urban waters showed a significantly higher prevalence of ammonium oxidising archaeal groups such as Nitrososphaeraceae (Student{\textquoteright}s t-test p-value \<0.05 with FDR correction), thereby probably suggesting the influence of agricultural runoffs. Besides, the microbial community diversity assessment also indicated the significant dissimilarity in the microbial community of urban and peri-urban waters. Overall, the analysis predicted 295 virulence genes mapping to 38 different path-ogenic bacteria in the riverine system. Moreover, the higher genome coverage (at least 60\%) for priority patho-gens such as Pseudomonas, Klebsiella, Acinetobacter, Escherichia, Aeromonas in the sediment metagenome consolidates their dominance in this riverine system. To conclude, our investigation showed that the unre-strained anthropogenic and related activities could potentially contribute to the overall dismal conditions and in-fluence the connected riverine stretches on the outskirts of the city . (c) 2021 Elsevier B.V. All rights reserved.

}, keywords = {Industrialisation, Peri-urban, Riverine system, Urbanisation, Virulence factors}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2021.146960}, author = {Yadav, Rakeshkumar and Rajput, Vinay and Dharne, Mahesh} } @article {47448, title = {Metagenomic analysis reveals genetic insights on biogeochemical cycling, xenobiotic degradation, and stress resistance in mudflat microbiome}, journal = {Journal of Environmental Management}, volume = {292}, year = {2021}, month = {AUG}, pages = {112738}, type = {Article}, abstract = {

Mudflats are highly productive coastal ecosystems that are dominated by halophytic vegetation. In this study, the mudflat sediment microbiome was investigated from Nalabana Island, located in a brackish water coastal wetland of India; Chilika, based on the MinION shotgun metagenomic analysis. Bacterial, archaeal, and fungal communities were mostly composed of Proteobacteria (38.3\%), Actinobacteria (20.7\%), Euryarchaeota (76.1\%), Candidatus Bathyarchaeota (6.8\%), Ascomycota (47.2\%), and Basidiomycota (22.0\%). Bacterial and archaeal community composition differed significantly between vegetated mudflat and un-vegetated bulk sediments. Carbon, nitrogen, sulfur metabolisms, oxidative phosphorylation, and xenobiotic biodegradation were the most common microbial functionalities in the mudflat metagenomes. Furthermore, genes involved in oxidative stresses, osmotolerance, secondary metabolite synthesis, and extracellular polymeric substance synthesis revealed adaptive mechanisms of the microbiome in mudflat habitat. Mudflat metagenome also revealed genes involved in the plant growth and development, suggesting that microbial communities could aid halophytic vegetation by providing tolerance to the abiotic stresses in a harsh mudflat environment. Canonical correspondence analysis and co-occurrence network revealed that both biotic (vegetation and microbial interactions) and abiotic factors played important role in shaping the mudflat microbiome composition. Among abiotic factors, pH accounted for the highest variance (20.10\%) followed by available phosphorus (19.73\%), total organic carbon (9.94\%), salinity (8.28\%), sediment texture (sand) (6.37\%) and available nitrogen (5.53\%) in the mudflat microbial communities. Overall, this first metagenomic study provided a comprehensive insight on the community structure, potential ecological interactions, and genetic potential of the mudflat microbiome in context to the cycling of organic matter, xenobiotic biodegradation, stress resistance, and in providing the ecological fitness to halophytes. These ecosystem services of the mudflat microbiome must be considered in the conservation and management plan of coastal wetlands. This study also advanced our understanding of fungal diversity which is understudied from the coastal lagoon ecosystems.

}, doi = {10.1016/j.jenvman.2021.112738 }, author = {Mohapatra, Madhusmita and Yadav, Rakeshkumar and Rajput, Vinay and Dharne, Mahesh S. and Rastogi, Gurdeep} } @article {47636, title = {Metagenomic exploration reveals a differential patterning of antibiotic resistance genes in urban and peri-urban stretches of a riverine system}, journal = {Environmental Science and Pollution Research}, volume = {28}, year = {2021}, month = {DEC}, pages = {66477-66484}, type = {Article}, abstract = {{Antimicrobial resistance in the riverine ecosystem of urban areas is an alarming concern worldwide, indicating the importance of molecular monitoring to understand their patterning in urban and peri-urban areas. In the present study, we evaluated the influence of urban rivers on the connected peri-urban rivers of a riverine system of India in the context of antibiotic resistance genes. The rivers traversing through urban (Mula, Mutha, Pawana, and Ramnadi) and peri-urban stretches (Bhima and Indrayani) form the riverine system of Pune district in Maharashtra, India. The MinION-based shotgun metagenomic analysis revealed the resistome against 26 classes of antibiotics, including the last line of antibiotics. In total, we observed 278 ARG subtypes conferring resistance against multiple drugs (40\%), bacitracin (10\%), aminoglycoside (7.5\%), tetracycline (7\%), and glycopeptide (5\%). Further, the alpha diversity analysis suggested relatively higher ARG diversity in the urban stretches than peri-urban stretches of the riverine system. The NMDS (non-metric multidimensional scaling) analysis revealed significant differences with overlapping similarities (stress value = 0.14}, keywords = {Antibiotic resistance, MinION, Peri-urban rivers, Urbanization}, issn = {0944-1344}, doi = {10.1007/s11356-021-16910-y}, author = {Rajput, Vinay and Yadav, Rakeshkumar and Dharne, Mahesh S.} } @article {47616, title = {Novel gene similar to nitrite reductase (NO forming) plays potentially important role in the latency of tuberculosis}, journal = {Scientific Reports}, volume = {11}, year = {2021}, month = {OCT }, pages = {19813}, type = {Article}, abstract = {The development of the latent phenotype of Mycobacterium tuberculosis (Mtb) in the human lungs is the major hurdle to eradicate Tuberculosis. We recently reported that exposure to nitrite (10 mM) for six days under in vitro aerobic conditions completely transforms the bacilli into a viable but non-cultivable phenotype. Herein, we show that nitrite (beyond 5 mM) treated Mtb produces nitric oxide (NO) within the cell in a dose-dependent manner. Our search for the conserved sequence of NO synthesizing enzyme in the bacterial system identified MRA2164 and MRA0854 genes, of which the former was found to be significantly up regulated after nitrite exposure. In addition, the purified recombinant MRA2164 protein shows significant nitrite dependent NO synthesizing activity. The knockdown of the MRA2164 gene at mRNA level expression resulted in a significantly reduced NO level compared to the wild type bacilli with a simultaneous return of its replicative capability. Therefore, this study first time reports that nitrite induces dormancy in Mtb cells through induced expression of the MRA2164 gene and productions of NO as a mechanism for maintaining non-replicative stage in Mtb. This observation could help to control the Tuberculosis disease, especially the latent phenotype of the bacilli.}, issn = {2045-2322}, doi = {10.1038/s41598-021-99346-1}, author = {Agrawal, Sonia and Gample, Suwarna and Yeware, Amar and Sarkar, Dhiman} } @article {47704, title = {Phosphine-free manganese(II)-catalyst enables acceptorless dehydrogenative coupling of alcohols with indoles}, journal = {Advanced Synthesis \& Catalysis}, volume = {363}, year = {2021}, month = {SEP }, pages = {4430-4439}, type = {Article}, abstract = {Herein, an air-stable, molecularly defined NNN-Mn(II) pincer complex catalyzed acceptorless dehydrogenative coupling of alcohols with indoles is reported. A wide variety of symmetrical and unsymmetrical bis(indolyl)methane derivatives as well as some structurally important products such as Vibrindole A, Turbomycin B alkaloid, Antileukemic, and Anticancer agents were synthesized. Mechanistic studies illustrate the importance of the NH moiety in the complex and the crucial role of metal-ligand cooperation during catalysis.}, keywords = {acceptorless dehydrogenation, Alcohol, Indole, manganese, phosphine-free}, issn = {1615-4150}, doi = {10.1002/adsc.202100621}, author = {Yadav, Vinita and Balaraman, Ekambaram and Mhaske, Santosh B.} } @article {47718, title = {PINIR: a comprehensive information resource for Pin-II type protease inhibitors}, journal = {BMC Plant Biology}, volume = {21}, year = {2021}, month = {JUN }, pages = {267}, type = {Article}, abstract = {Background: Serine protease inhibitors belonging to the Potato type-II Inhibitor family Protease Inhibitors (Pin-II type PIs) are essential plant defense molecules. They are characterized by multiple inhibitory repeat domains, conserved disulfide bond pattern, and a tripeptide reactive center loop. These features of Pin-II type PIs make them potential molecules for protein engineering and designing inhibitors for agricultural and therapeutic applications. However, the diversity in these PIs remains unexplored due to the lack of annotated protein sequences and their functional attributes in the available databases. Results: We have developed a database, PINIR (Pin-II type PIs Information Resource), by systematic collection and manual annotation of 415 Pin-II type PI protein sequences. For each PI, the number and position for signature sequences are specified: 695 domains, 75 linkers, 63 reactive center loops, and 10 disulfide bond patterns are identified and mapped. Database analysis revealed novel subcategories of PIs, species-correlated occurrence of inhibitory domains, reactive center loops, and disulfide bond patterns. By analyzing linker regions, we predict that alternative processing at linker regions could generate PI variants in the Solanaceae family. Conclusion: PINIR (https://pinir.ncl.res.in) provides a web interface for browsing and analyzing the protein sequences of Pin-II type PIs. Information about signature sequences, spatio-temporal expression, biochemical properties, gene sequences, and literature references are provided. Analysis of PINIR depicts conserved species-specific features of Pin-II type PI protein sequences. Diversity in the sequence of inhibitory domains and reactive loops directs potential applications to engineer Pin-II type PIs. The PINIR database will serve as a comprehensive information resource for further research into Pin-II type PIs.}, keywords = {annotation, Data analysis, Database, Knowledge representation, Pin-II type protease inhibitor, Protein sequence analysis}, issn = {1471-2229}, doi = {10.1186/s12870-021-03027-0}, author = {Yadav, Nikhilesh K. and Saikhedkar, Nidhi S. and Giri, Ashok P.} } @article {47748, title = {Possible electron doping of geometrically perfect spin-1/2 kagome-lattice barlowite by reduced graphene oxide}, journal = {Physical Review B}, volume = {104}, year = {2021}, month = {SEP }, pages = {L100418}, type = {Letter}, abstract = {Doping of quantum spin liquid (QSL) insulators by electron or hole leads to intriguing phase transitions to metallic and superconducting states. The barlowite family with geometrically perfect S = 1/2 kagome planes and tunable interkagome coupling is an emerging platform to realize spin-ordered, valence bond crystal, QSL states. Theoretical investigations on electron doping revealed localized states in the band gap of barlowite unlike metallicity in cuprate (Nd2CuO4). We present successful anchoring of phase-pure barlowite crystallites onto reduced graphene oxide (rGO). The resulting barlowite-rGO system was found to be an electrical semiconductor with Arrhenius activation energy of 0.07 eV. Semiconducting properties of the barlowite-rGO system were further modulated with retention of structural integrity. We have attributed such a transformation of electrical transport response to plausible electron doping thereby making charge-doping experiments on barlowite and its analogs propitious.}, issn = {2469-9950}, doi = {10.1103/PhysRevB.104.L100418}, author = {Gupta, Kriti and Ninawe, Pranay and Jain, Anil and Dadwal, Arun and Anas, M. and Malik, V. K. and Yusuf, S. M. and Joy, Pattayil A. and Ballav, Nirmalya} } @article {47821, title = {Recent advances in liquid organic hydrogen carriers: an alcohol-based hydrogen economy}, journal = {ACS Catalysis}, volume = {11}, year = {2021}, month = {NOV}, pages = {14712-14726}, type = {Article}, abstract = {Energy storage and the use of abundantly available feedstock without contributing to the carbon footprint are two significant global challenges. In this regard, the development of high-performance, low-cost, sustainable, and environmentally friendly energy storage and production systems is crucial to fulfill the growing energy demands of the current society. The use of hydrogen will diversify energy sources as it significantly reduces greenhouse gas emissions and environmental pollution during energy conversion. Although the hydrogen economy is quite beneficial, hydrogen storage is still very challenging, and the existing methods suffer from a lot of problems and drawbacks. The conventional liquefaction and compression hydrogen storage technologies are associated with several challenges, including low storage density, boil-off losses, relatively high costs, and safety and transportation concerns. In recent years, liquid organic hydrogen carrier (LOHC) systems have attained a lot of importance as a substitute for the traditional storage methods. Hydrogen storage and transport using LOHCs are based on two-step cycles, such as (i) loading/storage of hydrogen by catalytic hydrogenation of H2-lean compounds and (ii) unloading/releasing hydrogen by dehydrogenating the resulting H2-rich liquids. Since alcohols are widely accessible from various industrial processes or even from biomass-derived precursors, the catalytic acceptorless dehydrogenation of alcohols is an attractive approach for future hydrogen storage applications. Hence, the catalytic dehydrogenation-hydrogenation of alcohols can be used for the development of alcohol-based LOHC systems which are economical, safe, and easy to handle. Further, they are similar to crude oils under ambient conditions and thus are suitable for use in the current energy infrastructure. This Review covers several essential aspects of these developing efficient and abundantly available LOHC systems for efficient hydrogen storage and transport applications. Additionally, reversible LOHC systems based on the catalytic dehydrogenation-hydrogenation of alcohols and their corresponding carbonyl compounds have been discussed.}, doi = {10.1021/acscatal.1c03283}, url = {https://doi.org/10.1021/acscatal.1c03283}, author = {Yadav, Vinita and Sivakumar, Ganesan and Gupta, Virendrakumar and Balaraman, Ekambaram} } @article {47703, title = {Room-temperature quasi-catalytic hydrogen generation from waste and water}, journal = {Green Chemistry}, volume = {23}, year = {2021}, month = {OCT}, pages = {7528-7533}, type = {Article}, abstract = {A solvation-driven catalyst-free H-2 generation system from water and various waste hydrosilanes at room temperature was developed, with good to quantitative H-2 yields in minutes. Using a green solvent is found to promote the strong coordination of proton carriers with hydrosilane to liberate H-2 based on molecular dynamics simulations. Theoretical calculations clarify that OH(-)in situ generated from H2O enabled by solvation is favorable for activating the Si-H species of hydrosilane, and the in situ formed Si-OH interacts more effectively with the adjacent remaining Si-H, both contributing to the overall enhanced H-2 generation. Moreover, the overall life-cycle impacts of the developed system are less than those of industrial H-2 production processes, especially in ozone layer depletion and abiotic depletion resources - fossil fuels. This protocol realizes the potential of efficiently producing H-2 from waste and water, and opens a new avenue to alleviate petroleum consumption.}, issn = {1463-9262}, doi = {10.1039/d1gc02722k}, author = {Wu, Hongguo and Zhang, Li-Long and Wang, Junqi and Jiang, Yiyuan and Li, Hu and Sudarsanam, Putla and Yang, Song} } @article {47714, title = {Stabilization of the elusive antimony(I) cation and its coordination complexes with transition metals}, journal = {Angewandte Chemie-International Edition}, volume = {60}, year = {2021}, month = {NOV}, pages = {25522-25529}, type = {Article}, abstract = {Upon stabilization by 5,6-bis(diisopropylphosphino)acenaphthene to form compound 1, the fugitive antimony (I) cation exhibited nucleophilic behavior towards coinage metals. Compound 1 was strategically synthesized at room temperature from SbCl3, the bis(phosphine), and trimethylsilyl trifluoromethanesulfonate taken in a 1:2:3 ratio, whereby the bis(phosphine) plays the dual role of a reductant and a supporting ligand. The generation of 1 involves two-electron oxidation of the ligand to form a P-P bonded diphosphonium dication. Compound 1 was separated from this dication to give both products in pure form in moderate yields. Despite the overall positive charge, the Sb-I site in 1 was found to bind to metal centers, forming complexes with Au-I, Ag-I and Cu-I. Compound 1 reduced Cu-II to Cu-I and formed a coordination complex with the resulting Cu-I species. The effects of the electron-rich bis(phosphine) and the constrained peri geometry in stabilizing and enhancing the nucleophilicity of 1 have been rationalized through computational studies.}, keywords = {antimony(I) cation, coordination modes, nucleophilicity, phosphine ligands, reduction}, issn = {1433-7851}, doi = {10.1002/anie.202111339}, author = {Kumar, Vikas and Gonnade, Rajesh G. and Yildiz, Cem B. and Majumdar, Moumita} } @article {47382, title = {Substrate, catalyst, and solvent: the triune nature of multitasking reagents in hydroboration and cyanosilylation}, journal = {Organometallics}, volume = {40}, year = {2021}, month = {APR}, pages = {1104-1112}, type = {Article}, abstract = {

A truly green chemical process would avoid the use of an external catalyst, while still achieving high efficiency. This has been realized in the very recent past for hydroboration, cyanosilylation, acetalization, and the aza-Michael addition, among other reactions. The current combined computational and experimental study unlocks the secret to how this highly desirable outcome is accomplished: one of the reactants in the process also acts as the catalyst. Specifically, this is shown (i) for the important hydroboration reaction, with pinacolborane (HBpin) as the hydroborating reagent and benzaldehyde, acetophenone, benzoic acid and p-methoxyphenylacetylene as the hydroborated substrates, and (ii) for cyanosilylation, with trimethylcyanosilane (TMSCN) as the cyanosilylating agent and benzaldehyde as the substrate. The mechanistic understanding thus gained has then been further exploited experimentally to bring hydroboration and cyanosilylation closer to experimental conditions in catalysis. These insights can potentially be expanded to the rapidly growing area of solvent-free and internal catalyst chemistry.

}, issn = {0276-7333}, doi = {10.1021/acs.organomet.1c00070}, author = {Dixit, Ruchi and Bisai, Milan Kumar and Yadav, Sandeep and Yadav, Vinita and Sen, Sakya S. and Vanka, Kumar} } @article {47091, title = {Sulfonic acid-functionalized heterogeneous catalytic materials for efficient biodiesel production: a review}, journal = {Journal of Environmental Chemical Engineering}, volume = {9}, year = {2021}, month = {FEB}, pages = {104719}, type = {Review}, abstract = {

The development of social productive forces leads to the increasing consumption of fossil fuels. However, the burning of traditional fossil fuels releases huge amounts of carbon emissions into the atmosphere, resulting in drastically increased global surface temperatures, and hence, global warming and abnormal climate change. Biodiesel, which can be produced by (trans)esterification of bio-oils using solid acid catalysts, is recognized as renewable and clean energy, alternative to fossil-derived diesel, and it can meet society{\textquoteright}s requirements. This review describes the catalytic conversion of bio-derived oils into biodiesel using various sulfonic acid-functionalized heterogeneous catalytic materials that show higher catalytic efficiency and superior recyclability. Besides, various methods of biodiesel preparation and the appropriate design and preparation of robust and efficient catalytic materials for biodiesel production were provided. Finally, the mechanisms of different catalytic esterification and transesterification reactions for biodiesel synthesis, the relevant reaction kinetic models, and techno-economic analysis of biodiesel production were critically discussed in this review.

}, keywords = {(Trans)esterification, Biodiesel, heterogeneous catalysis, kinetic study, solid acid}, doi = {10.1016/j.jece.2020.104719}, author = {Tan, Xiang and Sudarsanam, Putla and Tan, Jinyu and Wang, Anping and Zhang, Heng and Li, Hu and Yang, Song} } @article {47400, title = {Synthetic heparan sulfate ligands for vascular endothelial growth factor to modulate angiogenesis}, journal = {Chemical Communications}, volume = {57}, year = {2021}, month = {APR }, pages = {3516-3519}, type = {Article}, abstract = {

We report the discovery of a potential heparan sulfate (HS) ligand to target several growth factors using 13 unique HS tetrasaccharide ligands. By employing an HS microarray and SPR, we deciphered the crucial structure-binding relationship of these glycans with the growth factors BMP2, VEGF(165), HB-EGF, and FGF2. Notably, GlcNHAc(6-O-SO3-)-IdoA(2-O-SO3-) (HT-2,6S-NAc) tetrasaccharide showed strong binding with the VEGF(165) growth factor. In vitro vascular endothelial cell proliferation, migration and angiogenesis was inhibited in the presence of VEGF(165) and HT-2,6S-NAc or HT-6S-NAc, revealing the potential therapeutic role of these synthetic HS ligands.

}, issn = {1359-7345}, doi = {10.1039/d1cc00964h}, author = {Jain, Prashant and Shanthamurthy, Chethan D. and Leviatan Ben-Arye, Shani and Yehuda, Sharon and Nandikol, Sharvani S. and Thulasiram, V, Hirekodathakallu and Padler-Karavani, Vered and Kikkeri, Raghavendra} } @article {47597, title = {Tandem acceptorless dehydrogenative coupling-decyanation under nickel catalysis}, journal = {Journal of Organic Chemistry}, volume = {86}, year = {2021}, month = {JUN}, pages = {7552-7562}, type = {Article}, abstract = {The development of new catalytic processes based on abundantly available starting materials by cheap metals is always a fascinating task and marks an important transition in the chemical industry. Herein, a nickel-catalyzed acceptorless dehydrogenative coupling of alcohols with nitriles followed by decyanation of nitriles to access diversely substituted olefins is reported. This unprecedented C=C bond-forming methodology takes place in a tandem manner with the formation of formamide as a sole byproduct. The significant advantages of this strategy are the low-cost nickel catalyst, good functional group compatibility (ether, thioether, halo, cyano, ester, amino, N/O/S heterocycles; 43 examples), synthetic convenience, and high reaction selectivity and efficiency.}, issn = {0022-3263}, doi = {10.1021/acs.joc.1c00592}, author = {Midya, Siba P. and Subaramanian, Murugan and Babu, Reshma and Yadav, Vinita and Balaraman, Ekambaram} } @article {47613, title = {Translating SARS-CoV-2 wastewater-based epidemiology for prioritizing mass vaccination: a strategic overview}, journal = {Environmental Science and Pollution Research}, volume = {28}, year = {2021}, month = {AUG}, pages = {42975-42980}, type = {Article}, abstract = {The inception of the novel coronavirus has forced the world into despair. Rapid progress has been made in addressing the situation, and various clinical diagnostic methods were developed for early detection of transmission. However, with a rapidly increasing number of infected populations worldwide, the testing of each individual was impractical. The wastewater-based epidemiology (WBE) has been implemented to evaluate disease outbreaks as an early warning system for pandemic preparedness. Numerous studies reported the presence of SARS-CoV-2 in the open drains and STPs across the globe via recovery efficiency of surrogate virus from existing virus concentration protocols. However, the such reported studies did not justify the use of WBE to identify or pinpoint the specific hotspots of transmission which could be prioritized for rapid efforts to contain or accelerate active vaccination efforts. Identifying precise locations of hotspots could be an essential aspect in controlling the outbreak and surge of wave by prioritizing the region for primary outbreak response. This article focuses on the issues relating to the primary focus for WBE that can be adapted, and its suitability for utilization in the mass vaccination program is discussed. Effective use of WBE information in terms of source tracking might be crucial as we move towards mass vaccination to control outbreaks of COVID-19 pandemic.}, keywords = {Epidemiology, Policy making, SARS-CoV-2, Vaccination, wastewater}, issn = {0944-1344}, doi = {10.1007/s11356-021-15169-7}, author = {Dharmadhikari, Tanmay and Yadav, Rakeshkumar and Dastager, Syed and Dharne, Mahesh} } @article {48027, title = {Divergent annulation of spiro[indoline-pyran] and fused (Epoxyetheno)indeno-furan from 1,2-diketone and 1-cyanoketone}, journal = {European Journal of Organic Chemistry}, volume = {2022}, year = {2022}, month = {AUG}, pages = {e202101534}, type = {Article}, abstract = {

A simple and efficient method for the construction of spiro[indoline-pyran] and fused (epoxyetheno)indeno[1,2-b]furan compounds from 1-cyanoketones and 1,2-diketone has been developed. The synthesis proceeded via the Knoevenagel and Michael adduct through intramolecular/Paal-Knorr cyclization under similar reaction condition. The less commonly used 1-cyanoketones and active carbonyl compounds served as the indole containing pyran and bicyclic furan source for the preparation of a new series of heterocyclic compounds. This heterocyclic structure allows one and more than one tetra-substituted carbon center and sequential hexa- and penta-cyclic core under very mild conditions and shows excellent chemo and regioselectivity. In addition, the synthesis of spiro[indoline-pyran] and (epoxyetheno)indeno[1,2-b]furan was demonstrated in a gram scale.

}, keywords = {Diverse synthesis, Intramolecular, Knoevenagel and Michael adduct, molecular diversity, Oxygen heterocycles, Paal-Knorr cyclization}, issn = {1434-193X}, doi = {10.1002/ejoc.202101534}, author = {Yadav, Maruti B. and Vagh, Sandip S. and Jeong, Yeon Tae} } @article {48412, title = {Electrospun zinc-manganese bimetallic oxide carbon nanofibers as freestanding supercapacitor electrodes}, journal = {International Journal of Energy Research}, volume = {46}, year = {2022}, month = {DEC}, pages = {22100-22112}, type = {Article}, abstract = {

Flexible, lightweight, and freestanding zinc-manganese oxide carbon nanofibers are promising materials for the fabrication of portable electronic devices. Composite nanofibers were synthesized using terephthalic acid and sodium dodecyl sulfate. Terephthalic acid improves the flexibility of the composite fibers and facilitates the diffusion of electrolytic ions. Meanwhile, sodium dodecyl sulfate aids to elevate the metal (zinc) oxide particles to the surface of the nanofibers during annealing. The texturing of the carbon nanofiber surface with ZnO enhances the electrochemical activity of the composite fibers. Parametric studies were conducted by varying the weight ratio of zinc and manganese acetates from zero to unity. The optimal case with a ratio of 0.75 produces specific capacitances of 1080 and 817 F center dot g(-1) at current densities of 1 and 10 A center dot g(-1), respectively, with a wide potential window of 1.6 V, indicating outstanding energy storage capabilities. The capacitance retention was 92\% after 10 000 galvanostatic charge-discharge cycles. The bending angle test confirmed the mechanical durability of the freestanding carbon nanofiber electrodes, and the corresponding change in the cyclic voltammetry curve was negligible.

}, keywords = {electrospinning, freestanding electrode, high-energy-density, supercapacitor, ZnMn2O4}, issn = {0363-907X}, doi = {10.1002/er.7719}, author = {Joshi, Bhavana and Samuel, Edmund and Kim, Yongil and Kim, Taegun and El-Newehy, Mohamed and Aldalbahi, Ali and Yoon, Sam S.} } @article {48225, title = {Enhanced hydrogen fuel production using synergistic combination of solar radiation and TiO2 photocatalyst coupled with Burkholderia cepacia lipase}, journal = {International Journal of Hydrogen Energy}, volume = {47}, year = {2022}, month = {APR }, pages = {14483-14492}, type = {Article}, abstract = {

Promising and sustainable alternatives for hydrogen production have been investigated. Among these, the use of enzymes may represent an efficient alternative. In this work, an increase in hydrogen production under simulated sunlight by combining TiO2 and TiO2/MgCl2 with Burkholderia cepacia lipase (BCL) was reported. The samples (TiO2, TiO2/MgCl2, and TiO2 /MgCl2/BCL) were characterized by X-ray diffraction (XRD), thermo-gravimetric (TGA), N-2 adsorption-desorption isotherms (BET), scanning electron microscopy (SEM), and UV-Visible absorption spectra. Hydrogen production tests were performed in aqueous methanol solutions under simulated sunlight. The results demonstrated that 130-times greater increase in hydrogen production rate was observed by the addition of BCL than individual TiO2. This better hydrogen production rate can be attributed to the increase in the amount of reduction equivalent of the system due to the oxidation of protein peptides caused by TiO2. In conclusion, the results indicate that hydrogen production efficiency can be significantly improved when integrating TiO2/MgCl2 with BCL. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

}, keywords = {hydrogen production, Lipase, Nano-conjugated enzymes, Photocatalyst, Solar radiation, Titanium dioxide}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2022.02.220}, author = {de Souza Brandao, Luma Mirely and Barbosa, Milson dos Santos and de Jesus, Roberta Anjos and Bharad, Pradnya Arunrao and Lima, Alvaro Silva and Faria Soares, Cleide Mara and Navarro Yerga, Rufino Manuel and Bilal, Muhammad and Romanholo Ferreira, Luiz Fernando and Iqbal, Hafiz M. N. and Gopinath, Chinnakonda S. and Figueiredo, Renan Tavares} } @article {48147, title = {Facile synthesis of nanocomposites of CNF-Sn and C-Sn microspheres: Prospective field emitter}, journal = {Journal of Alloys and Compounds}, volume = {907}, year = {2022}, month = {JUN }, pages = {164318}, type = {Article}, abstract = {

We report synthesis of Carbon nanofibers (CNFs) and hybrid nanocomposites namely, CNF-Sn and C-Sn microspheres using simple electrospinning technique, followed by annealing in controlled atmosphere. The as-prepared materials were characterized using X-raydiffraction (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Ultra-violet photoelectron spectroscopy (UPS), and Raman spectroscopy to reveal their physico-chemical properties. As carbon family members are potential materials for field emission (FE) based applications, owing to their high aspect ratio FE characteristics of the synthesized materials were explored at base pressure of 1 x 10(-8) mbar. Interestingly, the hybrid nanocomposite CNF-Sn and C-Sn emitters showed improved FE behavior (with the turn-on field of 3.4 and 1.36 V/mu m, respectively) in contrast to the pristine CNFs emitter (turn-on field of 5.4 V/mu m). Furthermore, the maximum emission current density is substantially enhanced, 7.75 and 4.6 mA/cm(2) for CNF-Sn and C-Sn emitters, respectively. The improvement in the FE behavior of nanocomposite emitters is attributed to the combined effect of morphology and modulation of electronic properties at the interface of nanocomposites. The results confirm that FE characteristics of pristine nanostructures can be greatly improved upon formation of their nanocomposites and this approach can be extended to other nanostructures for improving their multi-functionalities. (c) 2022 Elsevier B.V. All rights reserved.

}, keywords = {carbon nanofiber, electrospinning, field emission, Nanocomposite, Tin}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2022.164318}, author = {Badadhe, Satish S. and Yadav, Poonam and Suryawanshi, Sachin and More, Mahendra A.} } @article {48227, title = {Gut microbiota dysbiosis in patients with intracranial sino-venous thrombosis and acute ischemic stroke in the young}, journal = {Annals of Indian Academy of Neurology}, volume = {25}, year = {2022}, month = {SEP-OCT}, pages = {980+}, type = {Letter}, issn = {0972-2327}, doi = {10.4103/aian.aian_393_22}, author = {Prabhu, Varsha A. and Rajput, Vinay and Yadav, Rakeshkumar and Gohil, Kushal and Dharne, Mahesh S. and Unnikrishnan, Mazhuvancherry Kesavan and Gorthi, Sankar Prasad} } @article {47763, title = {High throughput sequencing based direct detection of SARS-CoV-2 fragments in wastewater of Pune, West India}, journal = {Science of the Total Environment}, volume = {807}, year = {2022}, month = {FEB }, pages = {151038}, type = {Article}, abstract = {Given a large number of SARS-CoV-2 infected individuals, clinical detection has proved challenging. The wastewater-based epidemiological paradigm would cover the clinically escaped asymptomatic individuals owing to the faecal shedding of the virus. We hypothesised using wastewater as a valuable resource for analysing SARS-CoV-2 mutations circulating in the wastewater of Pune region (Maharashtra; India), one of the most affected during the covid-19 pandemic. We conducted study in open wastewater drains from December 2020- March 2021 to assess the presence of SARS-CoV-2 nucleic acid and further detect mutations using ARTIC protocol of MinION sequencing. The analysis revealed 108 mutations across six samples categorised into 39 types of mutations. We report the occurrence of mutations associated with Delta variant lineage in March-2021 samples, simultaneously also reported as a Variant of Concern (VoC) responsible for the rapid increase in infections. The study also revealed four mutations; S:N801, S:C480R, NSP14:C279F and NSP3:L550del not currently reported from wastewater or clinical data in India but reported worldwide. Further, a novel mutation NSP13:G206F mapping to NSP13 region was observed from wastewater. Notably, S:P1140del mutation was detected in December 2020 samples while it was reported in February 2021 from clinical data, indicating the instrumentality of wastewater data in early detection. This is the first study in India to demonstrate utility of sequencing in wastewater based epidemiology to identify mutations associated with SARS-CoV-2 virus fragments from wastewater as an early warning indicator system. (c) 2021 Elsevier B.V. All rights reserved.}, keywords = {ARTIC protocol, Epidemiology, Metagenomics, Nanopore sequencing, SARS-CoV-2, wastewater}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2021.151038}, author = {Dharmadhikari, Tanmay and Rajput, Vinay and Yadav, Rakeshkumar and Boargaonkar, Radhika and Patil, Dhawal and Kale, Saurabh and Kamble, Sanjay P. and Dastager, Syed G. and Dharne, Mahesh S.} } @article {48198, title = {High-alkaline water-splitting activity of mesoporous 3D heterostructures: an amorphous-shell@crystalline-core nano-assembly of Co-Ni-phosphate ultrathin-nanosheets and V- doped cobalt-nitride nanowires}, journal = {Advanced Science}, volume = {9}, year = {2022}, month = {AUG}, pages = {2201311}, type = {Article}, abstract = {

Introducing amorphous and ultrathin nanosheets of transition bimetal phosphate arrays that are highly active in the oxygen evolution reaction (OER) as shells over an electronically modulated crystalline core with low hydrogen absorption energy for an excellent hydrogen evolution reaction (HER) can boost the sluggish kinetics of the OER and HER in alkaline electrolytes. Therefore, in this study, ultrathin and amorphous cobalt-nickel-phosphate (CoNiPOx) nanosheet arrays are deposited over vanadium (V)-doped cobalt-nitride (V-3\%-Co4N) crystalline core nanowires to obtain amorphous-shell@crystalline-core mesoporous 3D-heterostructures (CoNiPOx@V-Co4N/NF) as bifunctional electrocatalysts. The optimized electrocatalyst shows extremely low HER and OER overpotentials of 53 and 270 mV at 10 mA cm(-2), respectively. The CoNiPOx@V-3\%-Co4N/NF (+/-) electrolyzer utilizing the electrocatalyst as both anode and cathode demonstrates remarkable overall water-splitting activity, requiring a cell potential of only 1.52 V at 10 mA cm(-2), 30 mV lower than that of the RuO2/NF (+)/20\%-Pt/C/NF (-) electrolyzer. Such impressive bifunctional activities can be attributed to abundant active sites, adjusted electronic structure, lower charge-transfer resistance, enhanced electrochemically active surface area (ECSA), and surface- and volume-confined electrocatalysis resulting from the synergistic effects of the crystalline V-3\%-Co4N core and amorphous CoNiPOx shells boosting water splitting in alkaline media.

}, keywords = {core-shell, hydrogen productions, metal nitrides, metal phosphates, synergistic effect, water-splitting}, doi = {10.1002/advs.202201311}, author = {Singh, Thangjam Ibomcha and Maibam, Ashakiran and Cha, Dun Chan and Yoo, Sunghoon and BabaRao, Ravichandar and Lee, Sang Uck and Lee, Seunghyun} } @article {48010, title = {Honeycomb boron carbon nitride as high-performance anode material for li-ion batteries}, journal = {ChemNanoMat}, volume = {8}, year = {2022}, month = {JUL}, pages = {e202200056}, type = {Article}, abstract = {

3D Porous carbon-based materials are well known for their excellent mechanical and electrochemical properties for various energy storage applications including Li-ion Battery (LIB) anodes. However, their commercial application is limited due to their low theoretical specific capacity. Heteroatom doping in carbonaceous networks proved an efficient way to modify the surface properties, which considerably improves the Li intake capacity and Li diffusion in porous carbon materials. In this work, we have synthesized 3D honeycomb boron carbon nitride (HBCN) from boric acid, glucose, and cyanamide. Silica nanoparticles (SiO2 NPs) are used as structure-directing agents to replicate well-organized honeycomb structures. HBCN possesses a high specific surface area (SSA) of similar to 597 m(2) g(-1), with a uniform porosity distribution, low charge transfer resistance, and steady Li flux. When analyzed as an anode material for LIB, HBCN demonstrated an excellent specific capacity of similar to 652 mAhg(-1) and 408 mAhg(-1) at an input current density of 100 mAg(-1) and 1 Ag-1 respectively and an energy density of 227 Wh kg(-1) at 1 C rate in a full cell LIB. These results indicate that the doping of B and N hetero atoms is significantly advantageous for LIBs application.

}, keywords = {3D-Architecture, Heteroatom Doping, High-Performance Anode, Honeycomb boron carbon nitride (HBCN), Li-ion battery}, issn = {2199-692X}, doi = {10.1002/cnma.202200056}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Patrike, Apurva and Yadav, Poonam and Shelke, V, Manjusha} } @article {48130, title = {Hybrid material for ferric ion detection \& remediation: exceptional selectivity \& adsorption capacity with biological applications}, journal = {Microporous and Mesoporous Materials}, volume = {338}, year = {2022}, month = {JUN}, pages = {111945}, type = {Article}, abstract = {

In this work, naphthalimide derived functionalized silica material SiO2@NAPIA (2,2{\textquoteright}((((propylazanediyl)bis (methylene))bis(2,1-phenylene))bis(oxy))bis(N-(1,3-dioxo-1H-benzo[de]i soquinoline-2(3H)-yl)acetamide)) was constructed as a dual signaling and remediation material for ferric ions from a pool of 35 common ions (cations and anions) in the aqueous system. The material Cubic SiO2 shows a high surface area (1104 m2/g, pore volume (1.510 cm3/g), and pore diameter (6.3 nm) in the mesoporous range, which reduces further on functionalization to get the final material SiO2@NAPIA. The ferric ion selectivity through fluorescence quenching displays a SternVolmer quenching constant (Ksv) of 7.8 x 108 M-1 with a LOD (Limit of detection) value of 0.11 mu M for ferricion, which is 48 times lower than the USEPA (United States Environmental Protection Agency) maximum contaminant level (5.35 mu M) in drinking water. This material also shows a very high adsorption capacity (664 mg/g) for ferric ions fitting the Langmuir model isotherm with R2 = 0.99, which can be easily stripped out, and the material can be recycled. This material was also used as a sensory probe material for biosensing of ferric ions through fluorescence imaging in living organisms like Artemia salina and quantification in the real environmental sample. Furthermore, the antibacterial activity inspired by the ferric ion chelating affinity shows good potency against several Gram-negative and Gram-positive bacterial strains. The Minimum Inhibitory Concentration (MIC) \& Minimal Bactericidal Concentration (MBC) of the material against these pathogens were found to be 100 \& 200 mu g/mL respectively. This material signifies superior activity with respect to the ferric-ion selective materials known in the literature.

}, keywords = {Adsorption, Antibacterial, Biosensing, Functional material, Mesoporous silica, sensing}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2022.111945}, author = {Yadav, Sanjay and Rajpurohit, Dushyantsingh and Dash, Soumya Ranjan and Bhojani, Gopal and Chatterjee, Shruti and Paital, Alok Ranjan} } @article {48127, title = {Metagenomic mining of Indian river confluence reveal functional microbial community with lignocelluloytic potential}, journal = {3 Biotech}, volume = {12}, year = {2022}, month = {JUN}, pages = {132}, type = {Article}, abstract = {

Microbial carbohydrate-active enzymes (CAZyme) can be harnessed for valorization of Lignocellulosic biomass (LCB) to value-added chemicals/products. The two Indian Rivers Ganges and the Yamuna having different origins and flow, face accumulation of carbon-rich substrates due to the discharge of wastewater from adjoining paper and pulp industries, which could potentially contribute to the natural enrichment of LCB utilizing genes, especially at their confluence. We analyzed CAZyme diversity in metagenomic datasets across the sacred confluence of the Rivers Ganges and Yamuna. Functional annotation using CAZyme database identified a total of 77,815 putative genes with functional domains involved in the catalysis of carbohydrate degradation or synthesis of glycosidic bonds. The metagenomic analysis detected similar to 41\% CAZymes catalyzing the hydrolysis of lignocellulosic biomass polymers- cellulose, hemicellulose, lignin, and pectin. The Beta diversity analysis suggested higher CAZyme diversity at downstream region of the river confluence, which could be useful niche for culture-based studies. Taxonomic origin for CAZymes revealed the predominance of bacteria (97\%), followed by archaea (1.67\%), Eukaryota (0.63\%), and viruses (0.7\%). Metagenome guided CAZyme diversity of the microflora spanning across the confluence of Ganges-Yamuna River, could be harnessed for biomass and bioenergy applications.

}, keywords = {CAZymes, Confluence (Sangam), Lignocellulosic, River Ganges, River Yamuna}, issn = {2190-572X}, doi = {10.1007/s13205-022-03190-7}, author = {Rajput, Vinay and Samson, Rachel and Yadav, Rakeshkumar and Dastager, Syed and Khairnar, Krishna and Dharne, Mahesh} } @article {47391, title = {Molecular phylogeny, structure modeling and in silico screening of putative inhibitors of aerolysin of Aeromonas hydrophila EUS112}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {40}, year = {2022}, month = {JUN}, type = {Article}, abstract = {

Aeromonas hydrophila, a Gram-negative bacterium, causes diseases in fish, resulting in excessive loss to the aquaculture industry. Aeromonas is a highly heterogeneous group of bacteria, and the heterogeneity of the genus is attributed to variation and diversity in the virulence factors and toxins among various Aeromonas strains. One of the major toxins aerolysin, secreted by the bacterium, causes hemorrhagic-septicemia and diarrhea and can serve as a drug target. Here, we describe characterization, molecular phylogeny, and homology modeling of the aerolysin of A. hydrophila strain EUS112 (Ah(EUS112)) cloned in our lab. The encoded aerolysin is 485 amino acids long with an N-terminal signal sequence of 23 amino acids. Phylogenetic analysis of the aerolysin of Ah(EUS112) revealed that it belongs to a diverse group of toxins, showing maximum similarity with aerolysins of other Aeromonas strains followed by Vibrio toxin. The homology model of the mature aerolysin of Ah(EUS112) was generated using the crystal structure of a mutant aerolysin (PDB\#3g4n) as the template, which showed that the encoded aerolysin exists as a channel protein. Validation of the generated model using bioinformatics tool confirmed it to be a good quality model that can be used for drug design. Molecular dock analysis revealed that drugs, aralia-saponin I, cyclamin, ardisiacrispin B, and aralia-saponin II bind to aerolysin with a higher affinity as compared to other drugs and at functionally important amino acids of aerolysin. Hence, these molecules can act as an effective therapeutics for inhibiting the aerolysin pore formation and curtail the severity of Aeromonas infection. Communicated by Ramaswamy H. Sarma

}, keywords = {Aerolysin, homology modeling, Molecular docking, Molecular dynamic simulation, phylogenetic tree}, issn = {0739-1102}, doi = {10.1080/07391102.2021.1918254, Early Access Date = APR 2021}, author = {Yadav, Sunita Kumari and Panwar, Deepak and Singh, Ankita and Tellis, Meenakshi B. and Joshi, Rakesh Shamsunder and Dixit, Aparna} } @article {48139, title = {Nanocellulose/melanin-based composites for energy, environment, and biological applications}, journal = {Journal of Materials Science}, volume = {57}, year = {2022}, month = {AUG}, pages = {14188-14216}, type = {Review}, abstract = {

Melanins, a class of brown-black pigments present in many natural sources, exhibit unique physical and chemical properties such as photoprotection, photoconductivity, metal ion chelation, free radical quenching, proton conductivity, and significant antimicrobial properties. These properties could be leveraged in various environmental and energy applications. However, their limited solubility makes them less amenable to processing. Over the last decade, there has been tremendous interest in developing synthetic analogs of melanin that are easy to dissolve and process. Nonetheless, melanins or their synthetic analogs cannot form mechanically robust free-standing films and fibers. This drawback could be partly circumvented by creating composites of melanin with nanocellulose, a nanomaterial derived from cellulosic biomass. Composites of melanins and nanocellulose offer an opportunity to utilize the functional aspects of melanin-like polymers in a mechanically stable nanocellulose network. This review attempts to capture the recent developments on this topic with special emphasis on technologically relevant applications.

}, issn = {0022-2461}, doi = {10.1007/s10853-022-07512-1}, author = {Ram, Farsa and Yadav, Prashant and Shanmuganathan, Kadhiravan} } @article {48343, title = {Nickel-catalyzed direct synthesis of N-substituted indoles from amino alcohols and alcohols}, journal = {Organic Letters}, volume = {24}, year = {2022}, month = {DEC}, pages = {9054-9059}, type = {Article}, abstract = {

A one-pot cascade approach for the synthesis of N substituted indoles from amino alcohols and alcohols under additive and base-free conditions with the liberation of water as the only stoichiometric byproduct is reported. The commercially available bench-stable Ni(OTf)2 salt in combination with 1,2-bis(dicyclohexylphosphino)ethane (dcype) is very effective for this unprecedented catalytic transformation. A broad range of substrates including aromatic and aliphatic primary alcohols, cyclic and acyclic secondary alcohols, and various substituted 2-aminophenyl ethyl alcohols are employed in the reaction conditions to provide a diverse range of N-alkylated indoles. Mechanistic studies revealed that the reaction proceeds through tandem N-alkylation via hydrogen autotransfer followed by the cyclization of N-alkylated alcohol intermediate.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.2c03617}, author = {Yadav, Vinita and Jagtap, Sayali G. and Balaraman, Ekambaram and Mhaske, Santosh B.} } @article {47820, title = {Probes and techniques used in active and the hypoxia-based dormant state of an antitubercular drug screening assay}, journal = {Medicine in Drug Discovery}, volume = {13}, year = {2022}, month = {MAR}, pages = {100115}, type = {Article}, abstract = {Current antitubercular drug therapy requires more than six months and is unable to kill latent or dormant forms of tuberculosis. Thus, it is a need of new drug therapy to fight against dormant tuberculosis. However, the major obstacle in the development of novel drugs for dormant tuberculosis is the lack of relevant screening systems and using reliable probes to measure growth inhibition. Until now, several probes used in active state assays are significantly determining the inhibitory effect against the active state of mycobacteria. The dormant condition assays are based on hypoxia-derived dormancy which include resazurin reduction assay, nitrite reductase assay, XTT reduction menadione assay and low oxygen recovery assay. Major probes used in those assays are colorimetric/fluorescent dyes, enzymatic activity, and reporter genes include luciferase and fluorescent proteins. Although these dormant assays are based on hypoxia-induced features and difficult to maintain for a longer duration. Also, they further complicated by growth detection and pursuit of high throughput screening criteria. Here we reviewed complications of probes and assay techniques used for anti-dormant drug screening programs of tuberculosis. This will provide the knowledge to design better alternative drug screening method for the anti-dormant form of tuberculosis.}, keywords = {Active and dormant states, and, Drug screening assay, Probes, tuberculosis}, issn = {2590-0986}, doi = {10.1016/j.medidd.2021.100115}, author = {Yeware, Amar and Akhtar, Shamim and Sarkar, Dhiman} } @article {47750, title = {Progress and potential of electrospinning-derived substrate-free and binder-free lithium-ion battery electrodes}, journal = {Chemical Engineering Journal}, volume = {430}, year = {2022}, month = {FEB }, pages = {132876}, type = {Review}, abstract = {Carbon nanofibers derived from electrospun precursors show great promise for electronic applications owing to their flexibility, conductivity, high surface area, and open structure. The integration of metal oxides and sulfides in carbon nanofibers, rather than using them with other binders, eliminates many problems caused by poor adhesion, nanomaterial agglomeration, excess mass contributed by inactive binders, and low conductivity of embedded active materials. The engineering of electrospun fibers with novel morphologies, such as core-shell, hollow, or porous structures, and the use of decorated carbon nanofibers (e.g., by electrodeposition or co precipitation) are discussed in this review. Representative schematic illustrations of the lithium-storage mechanism for these binder-free electrodes are presented. We describe how the electrospinning technique can offer a cost-effective strategy for fabrication of lightweight lithium-ion batteries with high capacity and excellent bendability. This review presents the fascinating morphologies of these specially designed carbon nanofiber electrodes, which enhance the electrochemical performance of metal oxides and sulfides, illustrating their enormous potential for use in wearable electronic devices and hybrid electric vehicles.}, keywords = {Carbon nanofibers, Co-axial, composites, core-shell, electrospinning, Flexible}, issn = {1385-8947}, doi = {10.1016/j.cej.2021.132876}, author = {Joshi, Bhavana and Samuel, Edmund and Kim, Yong-il and Yarin, Alexander L. and Swihart, Mark T. and Yoon, Sam S.} } @article {48182, title = {Protophilic solvent-impelled quasi-catalytic CO2 valorization to formic acid and N-formamides}, journal = {Fuel}, volume = {326}, year = {2022}, month = {OCT}, pages = {125074}, type = {Article}, abstract = {

As a low-price and luxuriant C1 sustainable resource, CO2 has the privilege of synthesizing hydrogen carriers and valuable chemicals. However, expensive metallic and organic catalysts are often indispensable for going on wheels of the relevant reaction processes. In this work, a protophilic solvent-impelled quasi-catalytic system was developed for efficient synthesis of formic acid and various N-formamides with high yields of 76-94\% via reductive CO2 functionalization under mild reaction conditions (50 ?). Direct activation of the liquid hydrosilane toward the reduction of CO2 enabled by DMSO with optimum basicity/protophilicity is the predominant reaction route among the examined interaction models, while carbonic acid potentially derived from excessive CO2 and residual water inhibits the reaction, as explicitly disclosed by theoretical calculations and isotope labeling experiments. In addition, the in situ formed O-formyl species is conductive to the cascade CO2 reduction steps, which remarkably facilitated the overall quasi-catalytic upgrading process.

}, keywords = {CO2 utilization, Formic acid, Green energy, Nitrogenous chemicals, Quasi-catalysis}, issn = {0016-2361}, doi = {10.1016/j.fuel.2022.125074}, author = {Wu, Hongguo and Li, Hu and Zhao, Wenfeng and Sudarsanam, Putla and Yang, Song} } @article {48100, title = {Research progress and perspective on lithium/sodium metal anodes for next-generation rechargeable batteries}, journal = {ChemSusChem}, volume = {15}, year = {2022}, month = {JUL}, pages = {e202200504}, type = {Review}, abstract = {

With the development of consumer electronic devices and electric vehicles, lithium-ion batteries (LIBs) are vital components for high energy storage with great impact on our modern life. However, LIBs still cannot meet all the essential demands of rapidly growing new industries. In pursuance of higher energy requirement, metal batteries (MBs) are the next-generation high-energy-density devices. Li/Na metals are considered as an ideal anode for high-energy batteries due to extremely high theoretical specific capacity (3860 and 1165 mAh g(-1) for Li and Na, respectively) and low electrochemical potential (-3.04 V for Li and -2.71 V for Na vs. standard hydrogen electrode). Unfortunately, uncontrolled dendrite growth, high reactivity, and infinite volume change induce severe safety concerns and poor cycle efficiency during their application. Consequently, MBs are far from commercialization stage. This Review represents a comprehensive overview of failure mechanism of lithium/sodium metal anode and its progress for rechargeable batteries through (i) electrolyte optimization, (ii) artificial solid-electrolyte interphase (SEI) layer formation, and (iii) nanoengineering at materials level in current collector, anode, and host. The challenges in current MBs research and potential applications of lithium/sodium metal anodes are also outlined and summarized.

}, keywords = {anode, Batteries, dendrite growth, Electrolytes, Energy storage}, issn = {1864-5631}, doi = {10.1002/cssc.202200504}, author = {Patrike, Apurva and Yadav, Poonam and Shelke, Vilas and Shelke, Manjusha} } @article {48226, title = {Review of recent progress in electrospinning-derived freestanding and binder-free electrodes for supercapacitors}, journal = {Coordination Chemistry Reviews}, volume = {460}, year = {2022}, month = {JUN }, pages = {214466}, type = {Review}, abstract = {

The versatile electrospinning technique is scalable and suitable to fabricate highly conducting freestanding carbon nanofiber composite electrodes for energy storage devices. Freestanding/flexible electrodes hold enormous potential for use in wearable electronic devices. Carbon-yielding polymers and the optimal use of sacrificial polymers, metal oxides, and sulfides retain the flexibility and enhance the surface area and pseudocapacitance of electrodes. Both as-prepared electrospun fibers and carbonized nanofibers are compatible with surface decoration via various chemical and electrochemical routes. Metal oxides/sulfides with various morphologies, such as nanocones and nanosheets, can be grown on the carbon nanofibers or on the as-prepared electrospun fibers using chemical synthesis methods such as electro-deposition, hydrothermal processes, and chemical impregnation to enhance the pseudocapacitance of the electrodes. Similarly, the deposition of metal organic frameworks on as-prepared electrospun fibers embellishes these fibers with nanostructures of specific morphologies such as dodecahedral and spindle-shaped structures. Under optimal conditions, these morphologies do not hamper the flexibility of the fibers, and binders are not required to retain them or maintain the electrode integrity. The engineering of electrodes with various morphologies and process parameters is presented systematically. Electrospinning-derived electrodes that have demonstrated significant electrochemical performance are highlighted and critically analyzed, and the energy storage mechanisms of these supercapacitors are described in detail. (C) 2022 Elsevier B.V. All rights reserved.

}, keywords = {Carbon nanofibers, Co-axial, composites, core-shell, electrospinning, Flexible, Porous, supercapacitor}, issn = {0010-8545}, doi = {10.1016/j.ccr.2022.214466}, author = {Joshi, Bhavana and Samuel, Edmund and Kim, Yong-il and Yarin, Alexander L. and Swihart, Mark T. and Yoon, Sam S.} } @article {47757, title = {Steroidal alkaloids defence metabolism and plant growth are modulated by the joint action of gibberellin and jasmonate signalling}, journal = {New Phytologist}, volume = {233}, year = {2022}, month = {FEB}, pages = {1220-1237}, type = {Article}, abstract = {Steroidal glycoalkaloids (SGAs) are protective metabolites constitutively produced by Solanaceae species. Genes and enzymes generating the vast structural diversity of SGAs have been largely identified. Yet, mechanisms of hormone pathways coordinating defence (jasmonate; JA) and growth (gibberellin; GA) controlling SGAs metabolism remain unclear. We used tomato to decipher the hormonal regulation of SGAs metabolism during growth vs defence tradeoff. This was performed by genetic and biochemical characterisation of different JA and GA pathways components, coupled with in vitro experiments to elucidate the crosstalk between these hormone pathways mediating SGAs metabolism. We discovered that reduced active JA results in decreased SGA production, while low levels of GA or its receptor led to elevated SGA accumulation. We showed that MYC1 and MYC2 transcription factors mediate the JA/GA crosstalk by transcriptional activation of SGA biosynthesis and GA catabolism genes. Furthermore, MYC1 and MYC2 transcriptionally regulate the GA signalling suppressor DELLA that by itself interferes in JA-mediated SGA control by modulating MYC activity through protein-protein interaction. Chemical and fungal pathogen treatments reinforced the concept of JA/GA crosstalk during SGA metabolism. These findings revealed the mechanism of JA/GA interplay in SGA biosynthesis to balance the cost of chemical defence with growth.}, keywords = {alpha-tomatine, defence, gibberellin (GA), growth, jasmonate (JA), steroidal glycoalkaloids (SGAs), Tomato}, issn = {0028-646X}, doi = {10.1111/nph.17845}, author = {Panda, Sayantan and Jozwiak, Adam and Sonawane, Prashant D. and Szymanski, Jedrzej and Kazachkova, Yana and Vainer, Andrii and Kilambi, Himabindu Vasuki and Almekias-Siegl, Efrat and Dikaya, Varvara and Bocobza, Samuel and Shohat, Hagai and Meir, Sagit and Wizler, Guy and Giri, Ashok P. and Schuurink, Robert and Weiss, David and Yasuor, Hagai and Kamble, Avinash and Aharoni, Asaph} } @article {48208, title = {Sustainable composite of SnFe2O4 conversion alloying anode for lithium-ion storage}, journal = {Sustainable Energy \& Fuels}, volume = {6}, year = {2022}, month = {AUG }, pages = {3806-3817}, type = {Article}, abstract = {

The development of high-performance, low-cost electrodes using sustainable materials for Li-ion batteries is of vital importance in view of their increasing demand for use in electronics and electric vehicles, as we transition from non-renewable energy resources. Challenges associated with commercial graphite anode materials include relatively low capacity, the use of high-temperature synthesis, Li dendrite formation, and limited rate capability. In this study, we present a tin ferrite SnFe2O4 (SFO) conversion alloying material (CAM), and its synergistic composite with a scalable and low-cost waste-derived carbon (WDC), which was prepared by low-temperature pyrolysis of a waste material sustainably. The combination of SFO with the WDC in the composite boosts the conductivity, diffusion kinetics, stability, and reversibility, and accommodates volume expansion upon cycling. The first charge capacity obtained for WDC, SFO, and SFO-WDC is 595, 1269, and 1331 mA h g(-1), respectively at 100 mA g(-1) in a Li-ion half-cell. In a full cell fabricated with LFP, a stable capacity of 80 mA h g(-1) at 100 mA g(-1) could be obtained, and the corresponding energy density for the SFO-WDCIILFP full cell is 300 W h kg(-1). Kinetic studies revealed that capacitance-controlled charge storage is dominant so the capacity was higher in the composite. This composite system addresses both the low capacity issue of the carbon anode and stability issues of CAMs while being compatible for use with current Li-ion battery technology.

}, issn = {2398-4902}, doi = {10.1039/d2se00919f}, author = {Yadav, Poonam and Parte, Golu and Malik, Wahid and Sabri, Ylias M. and Jones, Lathe A. and Shelke, V. Manjusha} } @article {48181, title = {Tuning the hybridization and charge polarization in metal nanoparticles dispersed over Schiff base functionalized SBA-15 enhances CO2 capture and conversion to formic acid}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {SEP}, pages = {18354-18362}, type = {Article}, abstract = {

Different Schiff base functionalized SBA-15 materials were synthesized through condensation reactions between 3-aminopropyltriethoxysilane (APTES) and different aldehydes (glutaraldehyde and butyraldehyde) over a mesoporous silica, SBA-15 (APTES-GLU/SBA-15 and APTES-BUT/SBA-15). Both static and dynamic experiments have been used for testing the CO2 capture efficiency of these materials. The hybridization of the N atom in APTES has been tuned from sp(3) to sp(2) upon condensation facilitating optimum CO2 capture in the direct synthesis of APTES-GLU/SBA-15. The undesirable oxides of nitrogen have been removed during the synthesis process to improve the CO2 capture efficiency. These materials were employed as supports for Pd-Ag and Pd-Ni bimetallic systems for the selective conversion of the captured CO2 to formic acid (FA) in 0.5 M KHCO3 solution. The Pd-Ni catalyst system exhibited enhanced CO2 to FA conversion activity compared to other heterogeneous systems, which is similar to 4 times better than that of the Pd-Ag system in this study. The X-ray absorption studies over the catalyst material confirmed that the relatively electron-deficient Ni in Pd-Ni compared to Ag in Pd-Ag favoured higher charge polarization between the metals in the Pd-Ni system enhancing the CO2 to FA conversion. The experimental observations are well supported by the DFT calculations.

}, issn = {2050-7488}, doi = {10.1039/d2ta03690h}, author = {Cherevotan, Arjun and Ray, Bitan and Yadav, Anish and Bagchi, Debabrata and Singh, Ashutosh Kumar and Riyaz, Mohd and Churipard, Sathyapal R. and Naral, Vinay and Kaur, Komalpreet and Gautam, Ujjal K. and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {47732, title = {Unraveling the reaction mechanism of selective C9 monomeric phenols formation from lignin using Pd-Al2O3-activated biochar catalyst}, journal = {Bioresource Technology}, volume = {344}, year = {2022}, month = {JAN}, pages = {126204}, type = {Article}, abstract = {The conversion of biomass-derived lignin to valuable monomeric phenols at high selectivity is of paramount importance for sustainable biorefineries. In this study, a novel Pd-Al2O3 supported on activated biochar catalyst is developed for lignin hydrogenolysis. The catalyst characterization revealed that the (1 1 1) planes of both of Pd-0 and Al2O3 were exposed to the surface. The maximum lignin conversion of 70.4\% along with high liquid yield (similar to 57 wt\%) was obtained at 240 degrees C, 3 h and 3 MPa H-2 pressure. The total monomeric phenols yield in the liquid was 51.6 wt\%, out of which C9 monomeric guaiacols constituted similar to 30.0 wt\% with 38.0\% selectivity to 4-propyl guaiacol. Using the reaction intermediate, coniferyl alcohol, chemoselective hydrogenation of C-alpha=C-beta is proved to occur over the Pd site, while dehydroxylation of C-gamma-OH is shown to occur over the alumina site. An impressive carbon atom economy of 60\% was achieved for the production of monomeric phenols.}, keywords = {Hydrogenolysis, lignin, Mechanism, Pd-Al/activated biochar, Propanol guaiacol, Propyl guaiacol}, issn = {0960-8524}, doi = {10.1016/j.biortech.2021.126204}, author = {Gurrala, L. and Kumar, M. M. and Yerrayya, Attada and Kandasamy, Prabu and Castano, Pedro and Raja, T. and Pilloni, Giovanni and Paek, C. and Vinu, R.} } @article {48140, title = {Wearable fabric supercapacitors based on CNTs and polyhedral ZnO with a wide potential window}, journal = {International Journal of Energy Research}, volume = {46}, year = {2022}, month = {MAY}, pages = {8186-8200}, type = {Article}, abstract = {

Wearable electronic devices such as health monitors, sensors, and e-skin can be powered by lightweight, high-power supercapacitors. Using a binder-free and low-temperature hydrothermal method, polyhedral ZnO nanoparticles were grown on carbon nanotube (CNT)-decorated cotton fabric, which is friendly to human skin and highly wearable, inexpensive, and thus commercially viable. The concentration of the starting material, zinc acetate, was varied to optimize the electrochemical performance. The evenly spaced polyhedral ZnO facilitated efficient permeation of the electrolyte into the active material. The fabric filaments were decorated with CNTs to enhance electron transfer and the overall electrochemical processes. The symmetric cell comprised of cotton fabric decorated with ZnO polyhedron/CNT showed no discernible change in the cyclic voltammetry curves even after 500 bending cycles, demonstrating the mechanical durability of the electrode. The potential window of 1.6 V using a Na2SO4/K2SO4 aqueous dual-ion electrolyte improved the long-term electrochemical stability and increased the energy storage capacity. The capacitance retention was 94\% after 5000 cycles at a current density of 1 A center dot g(-1), indicating long-term electrochemical stability. A specific capacitance of 375 F center dot g(-1) at a current density of 5 A center dot g(-1) and energy density of 33.3 Wh center dot kg(-1) at a power density of 2000 W center dot kg(-1) were recorded for the optimized electrode. Highlights Polyhedral ZnO was grown on cotton fabric using a hydrothermal process. The electrochemical performance was optimized by varying the zinc acetate concentration. The highest specific capacitance was 375 F center dot g(-1) at a current density of 5 A center dot g(-1). Under optimal conditions, the capacitance retention was 94\% at N = 5000 cycles. The energy density of the electrode was as high as 33.3 Wh center dot kg(-1).

}, keywords = {carbon nanotube, Cotton fabric, hydrothermal process, wearable supercapacitor, ZnO polyhedron}, issn = {0363-907X}, doi = {10.1002/er.7720}, author = {Samuel, Edmund and Joshi, Bhavana and Park, Chanwoo and Aldalbahi, Ali and El-Newehy, Mohamed and Lee, Hae-Seok and Yoon, Sam S.} } @article {48772, title = {Conversion of benzyl phenyl ether to monoaromatics in high-temperature aqueous ethanol solution under high-pressure carbon dioxide conditions}, journal = {New Journal of Chemistry}, volume = {47}, year = {2023}, month = {JUL}, pages = {12561-12569}, type = {Article}, abstract = {

Solvolysis of benzyl phenyl ether (BPE), which is a model compound of lignin ether linkage, was studied in an aqueous ethanol solution, which can be obtained from bioethanol, under high-pressure carbon dioxide conditions. A batch study revealed that BPE solvolysis to monoaromatics (benzyl ethyl ether (BEE), benzyl alcohol (BA), and phenol (Ph)) proceeded in aqueous ethanol solution over 523 K and the addition of high-pressure carbon dioxide enhanced the initial solvolysis rate and suppressed the side reaction (hydrogenolysis to toluene (TL)). The ethanol molar fraction (ethanol-water volume ratio) is the key factor for the solvolysis reaction, and the highest monoaromatic yield of 72.9\% (BEE 10.7\%, BA 19.3\%, Ph 37.9\%, and TL 5.1\%) was obtained in aqueous ethanol solution (2 cm(3) : 1 cm(3) = water:ethanol) at 598 K for 3 h under a pressure of 18 MPa of carbon dioxide. The solvolysis reaction proceeded continuously to produce monoaromatics with a flow system. A monoaromatic yield of 76.7\% (BEE 8.6\%, BA 19.7\%, Ph 39.6\%, and TL 8.9\%) was obtained, and the formation rates were 2.7 x 10(-4) mmol min(-1) for BEE, 6.2 x 10(-4) mmol min(-1) for BA, and 12.4 x 10(-4) mmol min(-1) for Ph at 598 K under flowing water (26 mmol min(-1)), ethanol solution (4.1 mmol min(-1)), carbon dioxide (1.2 mmol min(-1)), and BPE (15.6 x 10(-4) mmol min(-1)) under a total pressure of 40 MPa.

}, issn = {1144-0546}, doi = {10.1039/d3nj01773g}, author = {Taniguchi, Kenkichi and Kusumawati, Etty N. and Nanao, Hidetaka and Rode, Chandrashekhar V. and Sato, Osamu and Yamaguchi, Aritomo and Shirai, Masayuki} } @article {49008, title = {Critical review on amorphous-crystalline heterostructured electrocatalysts for efficient water splitting}, journal = {Materials Chemistry Frontiers}, volume = {7}, year = {2023}, month = {DEC}, pages = {6254-6280}, type = {Review}, abstract = {

Introducing complementary active materials in tandem as heterostructures of various shapes and sizes can significantly improve the physicochemical properties of the developed materials. Recently, the use of amorphous materials in conjunction with crystalline moieties as highly efficient electrocatalysts for water-splitting electrolyzers has surged rapidly. Excellent bifunctional activity for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be achieved from amorphous-crystalline-based materials owing to their remarkably conductive crystalline phase as well as their long-range disordered amorphous phase. In addition, the high specific surface area, disordered structure, and enhanced structural stability can accommodate various defects and strains that develop during in situ electrochemical reactions. Consequently, amorphous materials can be used as both surface-confined and volume-confined electrocatalysts. Although crystalline materials have better electronic properties as well as higher thermal and mechanical stability, they suffer from limited activity due to only surface-confined electrocatalysis. In this regard, the judicious integration of crystalline and amorphous active materials suitable for the OER and HER can tremendously enhance their bifunctional electrocatalytic activities owing to their synergistic effects. The variety in the choice of amorphous and crystalline counterparts presents ample opportunities for further exploration of the development of amorphous-crystalline heterostructured materials with unique properties. However, considering the recent massive developments in the understanding and protocols for fabricating such heterostructures, a critical review is vital for further advancement in this direction. Although some review papers have focused only on amorphous materials, including their synthesis methods, properties, and applications, no critical review that provides an overview emphasizing amorphous-crystalline heterostructures for electrocatalytic water-splitting applications has been published. In this regard, this review aims to present comprehensive details on the recent developments in the fabrication of different amorphous-crystalline heterostructures, the choice of the composition of each component, and the resulting physicochemical properties for the OER, HER, and overall water-splitting. It provides an in-depth understanding of amorphous-crystalline material synthesis protocols, their selection rationale, and their targeted physicochemical properties. This review also provides thought-provoking ideas and long-term perspectives for future research. This review presents comprehensive details on recent developments in the fabrication of different amorphous-crystalline heterostructures, their compositions, and the resulting physicochemical properties for OER, HER, and overall water splitting.

}, doi = {10.1039/d3qm00940h}, author = {Singh, Manjinder and Cha, Dun Chan and Singh, Thangjam Ibomcha and Maibam, Ashakiran and Paudel, Dasu Ram and Nam, Dong Hwan and Kim, Tae Hyeong and Yoo, Sunghoon and Lee, Seunghyun} } @article {48995, title = {Genomic surveillance reveals early detection and transition of delta to omicron lineages of SARS-CoV-2 variants in wastewater treatment plants of Pune, India}, journal = {Environmental Science and Pollution Research }, volume = {30}, year = {2023}, month = {DEC}, pages = {118976-118988}, type = {Article}, abstract = {

The COVID-19 pandemic has emphasized the urgency for rapid public health surveillance methods to detect and monitor the transmission of infectious diseases. The wastewater-based epidemiology (WBE) has emerged as a promising tool for proactive analysis and quantification of infectious pathogens within a population before clinical cases emerge. In the present study, we aimed to assess the trend and dynamics of SARS-CoV-2 variants using a longitudinal approach. Our objective included early detection and monitoring of these variants to enhance our understanding of their prevalence and potential impact. To achieve our goals, we conducted real-time quantitative polymerase chain reaction (RT-qPCR) and Illumina sequencing on 442 wastewater (WW) samples collected from 10 sewage treatment plants (STPs) in Pune city, India, spanning from November 2021 to April 2022. Our comprehensive analysis identified 426 distinct lineages representing 17 highly transmissible variants of SARS-CoV-2. Notably, fragments of Omicron variant were detected in WW samples prior to its first clinical detection in Botswana. Furthermore, we observed highly contagious sub-lineages of the Omicron variant, including BA.1 (similar to 28\%), BA.1.X (1.0-72\%), BA.2 (1.0-18\%), BA.2.X (1.0-97.4\%) BA.2.12 (0.8-0.25\%), BA.2.38 (0.8-1.0\%), BA.2.75 (0.01-0.02\%), BA.3 (0.09-6.3\%), BA.4 (0.24-0.29\%), and XBB (0.01-21.83\%), with varying prevalence rates. Overall, the present study demonstrated the practicality of WBE in the early detection of SARS-CoV-2 variants, which could help track future outbreaks of SARS-CoV-2. Such approaches could be implicated in monitoring infectious agents before they appear in clinical cases.

}, keywords = {Bioinformatics pipeline, COVID-19, Early warning, India, Next-generation sequencing, Omicron, Public health, SARS-CoV-2, wastewater, Wastewater-based epidemiology}, issn = {0944-1344}, doi = {10.1007/s11356-023-30709-z}, author = {Rajput, Vinay and Pramanik, Rinka and Malik, Vinita and Yadav, Rakeshkumar and Samson, Rachel and Kadam, Pradnya and Bhalerao, Unnati and Tupekar, Manisha and Deshpande, Dipti and Shah, Priyanki and Shashidhara, L. S. and Boargaonkar, Radhika and Patil, Dhawal and Kale, Saurabh and Bhalerao, Asim and Jain, Nidhi and Kamble, Sanjay and Dastager, Syed and Karmodiya, Krishanpal and Dharne, Mahesh} } @article {48969, title = {Intramolecular donor-stabilized tetra-coordinated germanium(iv) di-cations and their Lewis acidic properties}, journal = {Chemical Science }, volume = {14}, year = {2023}, month = {DEC }, pages = {13755-13764}, type = {Article}, abstract = {

We report the first examples of intramolecular phosphine-stabilized tetra-coordinated germanium(iv) di-cationic compounds: [(L2Ge)-Ge-iPr][CF3SO3](2)3iPr and [(L2Ge)-Ge-Ph][CF3SO3](2)3Ph (L-iPr = 6-(diisopropylphosphanyl)-1,2-dihydroacenaphthylene-5-ide; L-Ph = 6-(diphenylphosphanyl)-1,2-dihydroacenaphthylene-5-ide). The step wise synthetic strategy involves the isolation of neutral and mono-cationic Ge(iv) precursors: [(L2GeCl)-Ge-iPr][X] (X = GeCl(3)1iPr, OTf 2iPr), [(L2GeCl2)-Ge-Ph] 1Ph and [(L2GeCl)-Ge-Ph][OTf] 2Ph. Both 3iPr and 3Ph exhibit constrained spiro-geometry. DFT studies reveal the dispersion of di-cationic charges over P-Ge-P sites. Anion or Lewis base binding occurs at the Ge site resulting in relaxed distorted trigonal bipyramidal/tetrahedral geometry. 3iPr and 3Ph activate the Si-H bond initially at the P-site. The hydride ultimately migrates to the Ge-site rapidly giving [(L2GeH)-Ge-Ph][CF3SO3] 3PhH, while sluggishly forming [(L2GeH)-Ge-iPr][CF3SO3] 3iPrH. Compounds 3iPr and 3Ph were tested as catalysts for the hydrosilylation of aromatic aldehydes. While catalytic hydrosilylation proceeded via the initial Et3Si-H bond activation in the case of 3iPr, compound 3Ph as a catalyst showed a masked Frustrated Lewis Pair (FLP) type reactivity in the catalytic cycle.

}, issn = {2041-6520}, doi = {10.1039/d3sc03717g}, author = {Peddi, Balakrishna and Khan, Souvik and Gonnade, Rajesh G. and Yildiz, Cem B. and Majumdar, Moumita} } @article {48790, title = {Luminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties}, journal = {Polymer Engineering and Science}, volume = {63}, year = {2023}, month = {JUL}, pages = {2059-2072}, type = {Article}, abstract = {

The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt\% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt\% thermoplastic polyurethane (TPU) into PLA led to 223\% increase in toughness and 21\% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35\%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.

}, keywords = {3D printing, Composite, fluorescence, Nanocellulose, poly(lactic acid), toughness}, issn = {0032-3888}, doi = {10.1002/pen.26345}, author = {Kothavade, Premkumar Anil and Yadav, Prashant and Nidhankar, Aakash D. and Torris, Arun and Pol, Harshawardhan and Kafi, Abdullah and Bateman, Stuart and Sukumaran, Santosh Babu and Shanmuganathan, Kadhiravan} } @article {48805, title = {Polymerized stimuli-responsive microgels for the removal of organic dye from water}, journal = {Journal of Molecular Liquids}, volume = {375}, year = {2023}, month = {APR }, pages = {121267}, type = {Article}, abstract = {

Polymerized hydrogel materials (PGM) containing uniform-sized stimuli-responsive microgel particles could be promising alternatives for solution-based microgels to remove organic dyes from water. In the current work, PGM is prepared using Poly(N-isopropylacrylamide-co-acrylic acid) based anionic microgels and their ability for uptake and release studies with an oppositely charged dye, methylene blue (MB) is carried out using UV-vis spectroscopy. The mechanism of dye adsorption is understood at a single particle level using light scattering, and zeta potential and the contributions from different molecular interactions among dye molecules and constituting entities of microgels are obtained from molecular docking studies. The maximum dye uptake by PGM is around 80 \% in the swollen state (at pH 7 and 20 degrees C). In contrast, the dye release studies in the deswollen state (at pH 3 and 50 degrees C) show a decrease in the release efficiency from 87 \% to 63 \% of the total dye adsorbed in 4-repeated cycles. The adsorption isotherm follows a sigmoidal (S) model that has been majorly used in different multi-layer adsorption systems. Extensive dynamic and static light scattering studies demonstrate a deswelling of hydrody-namic radius and core-shell radius of microgels at low temperatures (20 degrees C) induced by dye adsorption. At higher temperatures, the dye-adsorbed microgels have a higher hydrodynamic radius than the pure microgels due to the remaining dye molecules within the microgel that do not release even in the deswollen state. Molecular docking studies show that electrostatic interaction dominates between COO- and MB and van der Waals/hydrophobic dominates for MB-NIPAM and MB-COOH docking complex respectively. Our work covering adsorption/desorption properties of the material to the single-particle level can provide a better understanding in formulating reusable smart materials for the remediation of different water pollutants.(c) 2023 Elsevier B.V. All rights reserved.

}, keywords = {dynamic light scattering, Molecular docking, PNIPAM microgels, Removal of organic pollutants, Stimuli -responsive microgels}, issn = {0167-7322}, doi = {10.1016/j.molliq.2023.121267}, author = {Pany, Biswajit and Majundar, Amrito Ghosh and Mohanty, Madhuchhanda and Fyis, K. P. and Dey, Tanima and Tripathy, Gautam and Bhat, Suresh and Yamanaka, Junpei and Mohanty, Priti S.} } @article {48324, title = {Pt-anchored-zirconium phosphate nanoplates as high-durable carbon-free oxygen reduction reaction electrocatalyst for PEM fuel cell applications}, journal = {Advanced Sustainable Systems}, volume = {7}, year = {2023}, month = {FEB}, type = {Article}, abstract = {

Commercially available platinum-supported carbon (Pt/C) catalysts are the most widely used oxygen reduction reaction (ORR) electrocatalysts in polymer electrolyte membrane fuel cells (PEMFCs). However, inadequate active triple-phase boundary formation and carbon oxidation in Pt/C during PEMFC operation shorten its lifetime and efficiency. In this direction, a new class of carbon-free electrocatalysts for ORR is prepared by dispersing Pt nanoparticles on ZrP (Zirconium phosphates) nanoplates. In one case (ZrP@Pt), the Pt nanoparticles are found to be closely distributed and completely covering the ZrP nanoplates, whereas in the second case (Pt/ZrP), the Pt nanoparticles selectively restrict dispersion along the edges of the support. ZrP as the support displays an intrinsic proton conductivity of approximate to 0.5 x 10(-4) S cm(-1) at 70 degrees C, with an activation energy (E-a) of 0.19 eV. Pt/ZrP shows better durability after 3000 start-stop cycles. The mass activity of Pt/ZrP is increased by 4.6 times compared to Pt/C, which exhibits a loss in mass activity by 1.37 times. The single-cell level validation of ZrP@Pt, Pt/ZrP, and Pt/C as the electrocatalysts in PEMFC at an operating potential of 0.60 V shows the achievable current densities of 0.600, 0.890, and 0.890 A cm(-2).

}, keywords = {carbon-free electrocatalysts, fuel cells, oxygen reduction reaction, zirconium phosphate}, issn = {2366-7486}, doi = {10.1002/adsu.202200330}, author = {Kumar, Sachin and Yoyakki, Athira and Pandikassala, Ajmal and Soni, Roby and Kurungot, Sreekumar} } @article {48322, title = {Spatio-temporal variation of the microbiome and resistome repertoire along an anthropogenically dynamic segment of the Ganges River, India}, journal = {Science of the Total Environment}, volume = {872}, year = {2023}, month = {MAY}, pages = {162125}, type = {Article}, abstract = {

Aquatic ecosystems are regarded as a hub of antibiotic and metal resistance genes. River Ganges is a unique riverine system in India with socio-cultural and economic significance. However, it remains underexplored for its microbiome and associated resistomes along its anthropogenically impacted course. The present study utilized a nanopore sequenc-ing approach to depict the microbial community structure in the sediments of the river Ganges harboring antibiotic and metal resistance genes (A/MRGs) in lower stretches known for anthropogenic impact. Comprehensive microbiome analyses revealed resistance genes against 23 different types of metals and 28 classes of antibiotics. The most dominant ARG category was multidrug resistance, while the most prevalent MRGs conferred resistance against copper and zinc. Seasonal differences dismally affected the microbiota of the Ganges. However, resistance genes for fosmidomycin and tetracycline varied with season ANOVA, p \< 0.05. Interestingly, 333 and 334 ARG subtypes were observed at all the locations in pre-monsoon and post-monsoon, respectively. The taxa associated with the dominant ARGs and MRGs were Pseudomonas and Burkholderia, which are important nosocomial pathogens. A substantial phage diversity for pathogenic and putrefying bacteria at all locations attracts attention for its use to tackle the dissemination of antibiotic and metal-resistant bacteria. This study suggests the accumulation of antibiotics and metals as the driving force for the emergence of resistance genes and the affiliated bacteria trafficking them. The present metagenomic as-sessment highlights the need for comprehensive, long-term biological and physicochemical monitoring and mitigation strategies toward the contaminants associated with ARGs and MRGs in this nationally important river.

}, keywords = {Antibiotics (ARGs), Bacteriophages, Heavy metals (MRGs), Metagenomics, Microbiome, River Ganges}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2023.162125}, author = {Samson, Rachel and Rajput, Vinay and Yadav, Rakeshkumar and Shah, Manan and Dastager, Syed and Khairnar, Krishna and Dharne, Mahesh} } @article {48477, title = {Strategies and practical approaches for stable and high energy density sodium-ion battery: a step closer to commercialization}, journal = {Materials Today Sustainability}, volume = {22}, year = {2023}, month = {JUN}, pages = {100385}, type = {Article}, abstract = {

Sodium-ion batteries (SIBs) are reckoned as a potential alternative to Li-ion batteries (LIBs). Currently, the limited supply of precursors and the cost of LIBs have regenerated research and development interest in SIBs. Due to differences in the chemistry of lithium (Li) and sodium (Na), optimized methods for LIBs cannot be blindly applied to develop SIBs. Along with the judicial selection of electrode materials, electrolytes, and interfaces are very crucial for safe, high-power, and long-lasting batteries. The initial part of this review deals with the challenges faced in commercializing SIB full cells. Subsequently, the strategies to improve the energy density of SIB full cells through electrode modifications and electrolyte engineering are described in detail. This review comprehensively represents notable insights into the large-scale commercialization of potential sodium-ion batteries in the full cell.(c) 2023 Elsevier Ltd. All rights reserved.

}, keywords = {Cathode additives, Electrolyte additives, Na compensation, Self -sacri ficial salts, Sodium -ion battery}, issn = {2589-2347}, doi = {10.1016/j.mtsust.2023.100385}, author = {Yadav, P. and Patrike, A. and Wasnik, K. and Shelke, V. and Shelke, M.} } @article {48819, title = {Tale of two waves: Delineating diverse genomic and transmission landscapes driving the COVID-19 pandemic in Pune, India}, journal = {Journal of Infection and Public Health}, volume = {16}, year = {2023}, month = {AUG}, pages = {1290-1300}, type = {Article}, abstract = {

Background: Modern response to pandemics, critical for effective public health measures, is shaped by the availability and integration of diverse epidemiological outbreak data. Tracking variants of concern (VOC) is integral to understanding the evolution of SARS-CoV-2 in space and time, both at the local level and global context. This potentially generates actionable information when integrated with epidemiological outbreak data.Methods: A city-wide network of researchers, clinicians, and pathology diagnostic laboratories was formed for genome surveillance of COVID-19 in Pune, India. The genomic landscapes of 10,496 sequenced samples of SARS-CoV-2 driving peaks of infection in Pune between December-2020 to March-2022, were determined. As a modern response to the pandemic, a {\textquoteleft}{\textquoteleft}band of five{\textquoteright}{\textquoteright} outbreak data analytics approach was used. This integrated the genomic data (Band 1) of the virus through molecular phylogenetics with key outbreak data including sample collection dates and case numbers (Band 2), demographics like age and gender (Band 3-4), and geospatial mapping (Band 5).Results: The transmission dynamics of VOCs in 10,496 sequenced samples identified B.1.617.2 (Delta) and BA(x) (Omicron formerly known as B.1.1.529) variants as drivers of the second and third peaks of infection in Pune. Spike Protein mutational profiling during pre and post-Omicron VOCs indicated differential rank ordering of high-frequency mutations in specific domains that increased the charge and binding properties of the protein. Time-resolved phylogenetic analysis of Omicron sub-lineages identified a highly divergent BA.1 from Pune in addition to recombinant X lineages, XZ, XQ, and XM. Conclusions: The band of five outbreak data analytics approach, which integrates five different types of data, highlights the importance of a strong surveillance system with high-quality meta-data for understanding the spatiotemporal evolution of the SARS-CoV-2 genome in Pune. These findings have important implica-tions for pandemic preparedness and could be critical tools for understanding and responding to future outbreaks.\& COPY; 2023 Published by Elsevier Ltd on behalf of King Saud Bin Abdulaziz University for Health Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

}, keywords = {COVID-19, Delta, Omicron, SARS-CoV-2 genomic surveillance, Variant of concern, Whole Genome Sequencing (WGS)}, issn = {1876-0341}, doi = {10.1016/j.jiph.2023.06.004}, author = {Niveditha, Divya and Khan, Soumen and Khilari, Ajinkya and Nadkarni, Sanica and Bhalerao, Unnati and Kadam, Pradnya and Yadav, Ritu and Kanekar, Jugal B. and Shah, Nikita and Likhitkar, Bhagyashree and Sawant, Rutuja and Thakur, Shikha and Tupekar, Manisha and Nagar, Dhriti and Rao, Anjani G. and Jagtap, Rutuja and Jogi, Shraddha and Belekar, Madhuri and Pathak, Maitreyee and Shah, Priyanki and Ranade, Shatakshi and Phadke, Nikhil and Das, Rashmita and Joshi, Suvarna and Karyakarte, Rajesh and Ghose, Aurnab and Kadoo, Narendra and Shashidhara, L. S. and Monteiro, Joy Merwin and Shanmugam, Dhanasekaran and Raghunathan, Anu and Karmodiya, Krishanpal} } @article {48454, title = {Template directed synthesis of boron carbon nitride nanotubes (BCN-NTs) and their evaluation for energy storage properties}, journal = {Advanced Materials Interfaces}, volume = {10}, year = {2023}, month = {JAN}, type = {Article}, abstract = {

A unique approach has been applied for the synthesis of 1D boron carbon nitride nanotubes (BCN-NTs) using MnO2 nanowires as templates. BCN-NTs have been evaluated in Na-ion batteries, Li-ion batteries, and supercapacitors as electrode material and exhibited excellent and stable electrochemical performance. BCN-NTs as an anode for Na-ion battery has been shown to be highly stable up to 3000 cycles with capacity retention of 95 mAh g(-1), at a high current density of 1 A g(-1). In the case of the Li-ion battery, these BCN-NTs show a specific capacity of 563 mAh g(-1) at a current density of 50 mA g(-1). Finally, when used as an electrode for a supercapacitor, BCN-NTs display a specific capacity of 221 F g(-1) at a current density of 3 A g(-1) and 168 F g(-1) even at a very high current density of 30 A g(-1) exemplifying the excellent rate performance. The multifunctionality and stable performance of BCN-NTs among various electrochemical energy storage systems highlight the robustness of the material and make it an excellent candidate for scalable production and commercialization.

}, keywords = {1D-nanostructure, boron carbon nitride nanotubes (BCN-NTs), Co-doping, Li-ion battery, Na-ion battery, Supercapacitors}, issn = {2196-7350}, doi = {10.1002/admi.202201560}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Yadav, Poonam and Patrike, Apurva and Shelke, Manjusha V.} } @article {48331, title = {Whole genome sequencing and comparative genomics of Indian isolates of wheat spot blotch pathogen bipolaris sorokiniana reveals expansion of pathogenicity gene clusters}, journal = {Pathogens}, volume = {12}, year = {2023}, month = {JAN}, pages = {1}, type = {Article}, abstract = {

Spot blotch is a highly destructive disease in wheat caused by the fungal pathogen Bipolaris sorokiniana (teleomorph, Cochliobolus sativus). It is prevalent in warm and humid areas, including Africa, Asia, Latin America, and the USA. In the present study, twelve isolates of B. sorokiniana were collected from wheat fields in three different geographical locations in India. The pathogenicity of seven sporulating isolates was assessed on {\textquoteleft}DDK 1025{\textquoteright}, a spot blotch-susceptible wheat variety under greenhouse conditions. The isolate {\textquoteleft}D2{\textquoteright} illustrated the highest virulence, followed by {\textquoteleft}SI{\textquoteright} and {\textquoteleft}BS52{\textquoteright}. These three isolates were sequenced using the Illumina HiSeq1000 platform. The estimated genome sizes of the isolates BS52, D2, and SI were 35.19 MB, 39.32 MB, and 32.76 MB, with GC contents of 48.48\%, 50.43\%, and 49.42\%, respectively. The numbers of pathogenicity genes identified in BS52, D2, and SI isolates were 2015, 2476, and 2018, respectively. Notably, the isolate D2 exhibited a relatively larger genome with expanded arsenals of Biosynthetic Gene Clusters (BGCs), CAZymes, secretome, and pathogenicity genes, which could have contributed to its higher virulence among the tested isolates. This study provides the first comparative genome analysis of the Indian isolates of B. sorokiniana using whole genome sequencing.

}, keywords = {Bipolaris sorokiniana, CAZyme, comparative genomics, spot blotch, whole genome sequencing}, doi = {10.3390/pathogens12010001}, author = {Yadav, Sagar and Raazi, Zarrine and Shivaraj, Sheelavanta Matha and Somani, Deepika and Prashant, Ramya and Kulkarni, Abhijeet and Kumar, Rajeev and Biradar, Suma and Desai, Shreenivas and Kadoo, Narendra} } @article {49139, title = {Zwitterionic tetrastanna(II) cyclic crown}, journal = {European Journal of Inorganic Chemistry}, volume = {26}, year = {2023}, month = {OCT }, type = {Article}, abstract = {

A 12-membered zwitterionic tetrastanna(II) cycle 1 having a crown ether-like topology has been isolated from the deprotonation of 1,1 \& PRIME;-methylenediimidazole (B) with two equivalents of Sn[N(SiMe3)(2)](2) (A). The solid-state structure and NMR analysis confirms the tetrastanna(II) cycle 1 to be comprised of two stannate(II) and two stannyliumylidene ion pairs in alternating positions of the heterocycle. Computational analysis shows greater nucleophilicity at the proximally located stannate(II) centers. Nonetheless, the tetrastanna(II) cycle 1 remains poorly reactive due to engagement of Sn-II lone pair electrons in intramolecular donor-acceptor interactions. Simple deprotonation reaction between Sn[N(SiMe3)(2)](2) (A) and N-(diisopropylphenyl)imidazole (C) in equimolar ratio has led to a stannylene 2, involving the formation of a Sn-C covalent bond with the anionic imidazol-2-yl carbon center along with the release of NH(SiMe3)(2). Compound 2 exists as a dimer, where the unsubstituted ring nitrogen atom coordinated intermolecularly to the other stannylene center.

}, keywords = {Deprotonation, Imidazole, Macrocycle, Sn-II cation, stannylene}, issn = {1434-1948}, doi = {10.1002/ejic.202300249}, author = {Sahoo, Padmini and Chibde, Purva and Das, Satyabrata and Banerjee, Subhrashis and Mali, Bhupendra P. and Vanka, Kumar and Gonnade, Rajesh G. and Yildiz, Cem. B. and Majumdar, Moumita} } @article {49367, title = {Aluminium, nitrogen-dual-doped reduced graphene oxide Co-existing with cobalt-encapsulated graphitic carbon nanotube as an activity modulated electrocatalyst for oxygen electrocatalyst for oxygen electrochemistry applications}, journal = {Small}, volume = {20}, year = {2024}, month = {AUG}, type = {Article}, abstract = {

There is a rising need to create high-performing, affordable electrocatalysts in the new field of oxygen electrochemistry. Here, a cost-effective, activity-modulated electrocatalyst with the capacity to trigger both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in an alkaline environment is presented. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with cobalt-encapsulated carbon nanotube units. Based on X-ray Absorption Spectroscopy (XAS) studies, it is established that the superior reaction kinetics in Al, Co/N-rGCNT over their bulk counterparts can be attributed to their electronic regulation. The Al, Co/N-rGCNT performs as a versatile bifunctional electrocatalyst for zinc-air battery (ZAB), delivering an open circuit potential approximate to 1.35 V and peak power density of 106.3 mW cm-2, which are comparable to the system based on Pt/C. The Al, Co/N-rGCNT-based system showed a specific capacity of 737 mAh gZn-1 compared to 696 mAh gZn-1 delivered by the system based on Pt/C. The DFT calculations indicate that the adsorption of Co in the presence of Al doping in NGr improves the electronic properties favoring ORR. Thus, the Al, Co/N-rGCNT-based rechargeable ZAB (RZAB) emerges as a highly viable and affordable option for the development of RZAB for practical applications. This manuscript reports the development of a new bifunctional catalyst that exhibits high activity and stability under practical operating conditions. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with the in situ formed cobalt-encapsulated CNT units is synthesized by a scalable pyrolysis method in an inert Ar atmosphere. The developed electrocatalyst achieved enhanced the oxygen reduction reaction (ORR) and the oxygen evolution reaction OER activity as a result of the favorable synergistic modulations and the system can serve as a process-friendly air-electrode for rechargeable zinc-air battery (RZAB). image

}, keywords = {Al, Bifunctional catalyst, DFT study, encapsulated structure, N-dual doping, Oxygen Evolution Reaction, oxygen reduction reaction, rechargeable zinc-air battery, X-ray absorption spectroscopy}, issn = {1613-6810}, doi = {10.1002/smll.202400012}, author = {Kharabe, Geeta Pandurang and Barik, Sidharth and Veeranmaril, Sudheesh Kumar and Nair, Aathira and Illathvalappil, Rajith and Yoyakki, Athira and Joshi, Kavita and Vinod, Chathakudath Prabhakaran and Kurungot, Sreekumar} } @article {49257, title = {Biocatalysis enables the scalable conversion of biobased furans into various furfurylamines}, journal = {NATURE COMMUNICATIONS}, volume = {15}, year = {2024}, month = {JUL }, type = {Journal Article}, keywords = {Biomass, OMEGA-TRANSAMINASE, OXIDASE, Reductive amination, SPECIFICITY}, doi = {10.1038/s41467-024-50637-x}, author = {Giri, Pritam and Lim, Seonga and Khobragade, Taresh P. and Pagar, Amol D. and Patil, Mahesh D. and Sarak, Sharad and Jeon, Hyunwoo and Joo, Sangwoo and Goh, Younghwan and Jung, Seohee and Jang, Yu-Jeong and Choi, Seung Beom and Kim, Ye Chan and Kang, Taek Jin and Heo, Yong-Seok and Yun, Hyungdon} } @article {49360, title = {Breaking the Pt electron symmetry and OH spillover towards ptir active center for performance modulation in direct ammonia fuel cell}, journal = {Small}, volume = {20}, year = {2024}, month = {DEC}, type = {Article}, abstract = {

The growing interest in low-temperature direct ammonia fuel cells (DAFCs) arises from the utilization of a carbon-neutral ammonia source; however, DAFCs encounter significant electrode overpotentials due to the substantial energy barrier of the *NH2 to *NH dehydrogenation, compounded by the facile deactivation by *N on the Pt surface. In this work, a unique catalyst, Pt4Ir@AlOOH/NGr i.e., Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles controllably decorated on the pseudo-boehmite phase of AlOOH-supported nitrogen-doped reduced graphene (AlOOH/NGr) composite, synthesized via the polyol reduction method. The detailed studies on the structural and electronic properties of the catalyst by XAS and VB-XPS reveal the possible electronic modulations. The optimized Pt4Ir/ANGr composition exhibits a significantly improved onset potential and mass activity for AOR. The DFT study confirms the OHad species spillover by AlOOH and Pt4Ir (100) facilitates the conversion of the *NH2 to *NH with minimal energy barriers. Finally, testing of DAFC at the system level using a membrane electrode assembly (MEA) with Pt4Ir/ANGr as the anode catalyst, demonstrating the suitability of the catalyst for its practical applications. This study thus uncovers the potential of the Pt4Ir catalyst in synergy with ANGr, largely addressing the challenges in hydrogen transportation, storage, and safety within DAFCs. In this article, a versatile catalyst, Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles decorated on AlOOH/NGr composite. The AlOOH provides an -OH-rich surface conducive to the facile adsorption and decoration of the PtIr alloy nanoparticles and OHad species spillover from AlOOH to the Pt4Ir active center during AOR, further validating the higher experimental activity obtained in Pt4Ir/ANGr. image

}, keywords = {ammonia oxidation reaction (AOR), d-band center, density functional theory (DFT) study, direct ammonia fuel cells, hydroxyl spillover effect, XAS analysis}, issn = {1613-6810}, doi = {10.1002/smll.202406589}, author = {Barik, Sidharth and Kharabe, Geeta Pandurang and Samal, Pragnya Paramita and Urkude, Rajashri R. and Kumar, Sachin and Yoyakki, Athira and Vinod, C. P. and Krishnamurty, Sailaja and Kurungot, Sreekumar} } @article {49612, title = {Dietary supplementation of lactococcus lactis subsp. lactis BIONCL17752 on growth performance, and gut microbiota of broiler chickens}, journal = {Probiotics and Antimicrobial Proteins}, year = {2024}, month = {JUN}, type = {Article}, abstract = {

The rapid rise of antimicrobial resistance (AMR) is a global concern, being triggered by the overuse or misuse of antibiotics in poultry farming sector. We evaluated Lactococcus lactis subsp. lactis BIONCL17752 strain, and characterized its probiotic potential to endure hostile gastrointestinal conditions. Genome sequencing analysis revealed probiotics traits, and gene clusters involved in bacteriocins, lactococcin A, and sactipeptides production. The absence of genes for antibiotic resistance, virulence, and biogenic amine production indicates the potential of probiotic strain. The BIONCL17752 strain was explored for antibiotic-free feed supplement for growth promotor in broiler chicken. The feed supplemented with 4 x 109 CFU/kg of probiotic strain, in combination with various concentrations of fructooligosaccharides (FOS) 1.0, 2.5, and 5.0 kg/tonne in starter, grower, and finisher diets, respectively. A significant improvement of body weight 152 to 171 g/bird (p \< 0.05), and a low feed conversion ratio (FCR) of 1.62, was achieved without using synthetic antibiotics for growth promotion. The results of biochemical, hematological, and histological examinations showed normal features, indicating that the treatment had no harmful effects on the bird{\textquoteright}s health. Reduced levels of cholesterol, triglycerides, high-density lipoprotein (HDL), and low-density lipoprotein (LDL) in serum are an indication of the health benefits for the treated birds. Microbial community analysis of fecal samples of poultry birds exhibited a higher abundance of Bacteroidetes, Firmicutes, Proteobacteria, Actinobacteria, and Fusobacteria. Probiotic treatment resulted in reduced Firmicutes and increased Bacteroidetes (F/B ratio) in the broiler{\textquoteright}s gut which highlights the benefits of probiotic dietary supplements. Importantly, the probiotic-fed group exhibited a high abundance of carbohydrate-active enzymes (CAZyme) such as glycoside hydrolases (GH), glycoside transferases (GT), and carbohydrate-binding module (CBM) hydrolases which are essential for the degradation of complex sugar molecules. The probiotic potential of the BIONCL17752 strain contributes to broilers{\textquoteright} health by positively affecting intestinal microbiota, achieving optimal growth, and lowering mortality, demonstrating the economic benefits of probiotic treatment in organic poultry farming.

}, keywords = {Antibiotic growth promotor, Broiler chickens, Functional genome analysis, Growth performance, Gut microbiota, Lactococcus lactis subsp. lactis}, issn = {1867-1306}, doi = {10.1007/s12602-024-10313-4}, author = {Navale, Vishwambar D. and Yadav, Rakeshkumar and Khilari, Ajinkya and Dharne, Mahesh and Shanmugam, Dhanasekaran and Vamkudoth, Koteswara Rao} } @article {49312, title = {An effective, facile, and rapid synthesis of nanosized Mn3O4 using a microwave route}, journal = {Journal of Nanoparticle Research}, volume = {26}, year = {2024}, month = {OCT}, pages = {239}, type = {Article}, abstract = {

Microwave-assisted one-pot, one-step, calcination-free synthesis of nanosized Mn3O4 is reported using only benzylamine and manganese acetate. Benzylamine in this protocol plays a vital role for efficient microwave synthesis. This microwave method enables the synthesis of nanosized Mn3O4 in just few hours only in a single step eliminating the need of calcinations of any intermediate. The synthesized nanosized Mn3O4 was analyzed by XRD, HRTEM, EDAX, and Raman spectroscopy. The catalytic and electrochemical properties of as-synthesized Mn3O4 were investigated. In galvanostatic charge-discharge experiments, after 800 cycles, more than 89\% capacitance was retained for electrodes made by as synthesized Mn3O4 nanomaterials indicating its very good stability. In the catalytic conversion of cinnamyl alcohol to cinnamaldehyde via oxidation, using as prepared nanosized Mn3O4 as a catalyst, it displays effective catalytic properties. A probable mechanical study of its formation was also envisaged. This synthesis protocol is additive-free, occurs in a short time, is facile, is energy efficient, and eliminates the use of many chemicals. These silent features make these reported protocols economically viable and environmentally benign which adhere to the principles of Green Chemistry.

}, keywords = {Calcination free, Electrochemical and catalytic properties, Nanosized Mn3O4, Single-step synthesis}, issn = {1388-0764}, doi = {10.1007/s11051-024-06148-3}, author = {Yadav, Akash and Jha, Ratnesh and Bhatkar, Akash and Kamble, Aditi and Vaishnav, Vishal and Bogalera, Shivamurthy P. and Manikandan, Marimuthu and Nayaka, Girish Praveen and Umbarkar, Shubhangi and Raja, Thirumalaiswamy and Bhatte, Kushal D.} } @article {49338, title = {Engineered PLGA core-lipid shell hybrid nanocarriers improve the efficacy and safety of irinotecan to combat colon cancer}, journal = {ACS BIOMATERIALS SCIENCE \& ENGINEERING}, volume = {10}, year = {2024}, month = {SEP}, pages = {6661-6676}, type = {Journal Article}, keywords = {BULK-POLYMERIZATION, Drug-delivery, LIPOSOMAL DOXORUBICIN}, issn = {2373-9878}, doi = {10.1021/acsbiomaterials.4c01260}, author = {Giram, Prabhanjan S. and Nimma, Ramakrishna and Bulbule, Anuradha and Yadav, Amit Singh and Gorain, Mahadeo and Radharani, Nalukurthi Naga Venkata and Kundu, Gopal C. and Garnaik, Baijayantimala} } @article {49121, title = {Enhanced catalytic conversion of disaccharides to propylene glycol using metal-supported graphitic carbon nitride}, journal = {Energy and Fuels}, volume = {38}, year = {2024}, month = {MAR }, pages = {7005-7017}, type = {Article}, abstract = {

Propylene glycol (or) 1,2-propanediol (1,2-PD) is an important polyol widely used for pharmaceuticals, polyester resins, paints, cosmetics, antifreeze, etc. Sucrose has emerged as a promising feedstock to produce 1,2-PD, as indicated by recent research findings. Graphitic carbon nitride (g-C3N4/gCN) was synthesized by using different crucibles. Ni-Mo was loaded on different g-C3N4 supports via the wetness impregnation method for sucrose hydrogenolysis. Effects of different g-C3N4 supports were studied. Catalysts with varying Ni (x = 0-8 wt \%) and Mo (y = 0-15 wt \%) contents were characterized using XRD, BET, XPS, FE-SEM, Py-FTIR, HR-TEM, TPD (CO2)and Raman spectroscopy. An attempt was made on sucrose conversion into 1,2-PD using a Ni-Mo/g-C3N4 catalyst. The catalyst containing 8\% Ni and 10\% Mo on Gr-gCN exhibited the best performance, achieving complete sucrose conversion with a 76\% yield of 1,2-PD under mild reaction conditions. The presence of highly dispersed nanoparticles and the nature of graphitic carbon nitride help improve the reactions{\textquoteright} yield by allowing reactions at lower temperatures, reducing the occurrence of side reactions, and increasing recycling rates. A straightforward approach to material preparation, coupled with the exceptional dispersion of metal nanoparticles, paves the way for a novel platform for biomass conversion.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.3c05087}, author = {Kirali, Arun Arunima Balachandran and Narayanan, Hariprasad and Viswanathan, Balasubramanian and Yadav, Parmeshwar and Marimuthu, Banu} } @article {49094, title = {Enhancing the crystallization kinetics and mechanical properties of poly(lactic acid) blends for 3D printing application}, journal = {ACS Applied Polymer Materials }, volume = {6}, year = {2024}, month = {MAY }, pages = {5754-5762}, type = {Article}, abstract = {

3D printing of poly(lactic acid) (PLA) blends has been attempted to resolve issues such as inherent brittleness and slow crystallization rate of PLA. However, a persistent challenge remains in the form of phase separation or gradual migration of the blended soft polymer or plasticizers. To simultaneously enhance the miscibility of the blends and toughness of 3D-printed parts, a triblock copolymer PLA-PEG-PLA was synthesized and blended with PLA in varying proportions (5, 10, 15, and 20 wt \%). Blending only 10-20 wt \% low molecular weight PLA-PEG-PLA into PLA yielded a miscible blend that showed a 45-fold increase in elongation at break and a 23-fold enhancement in toughness over neat PLA. Scanning electron microscopy (SEM) images of fractured cross sections revealed a brittle to ductile transition in 3D-printed PLA/PLA-PEG-PLA samples. Isothermal crystallization studies and data analysis using the Avrami equation showed an enhancement in the crystal growth rate and overall rate of crystallization. The blends achieved half of their crystallinity in approximately 3 min, a significant improvement over the 9 min required by PLA alone. This underscores the efficiency of our approach. This was also evident in the spherulite growth of 3D-printed PLA and mPLA blends when examined using polarized optical microscopy (POM). To the best of our knowledge, this is the first report exploring the use of blends that include PLA and low molecular weight PLA-PEG-PLA triblock copolymers for 3D printing applications.

}, keywords = {Crystallization, FFF 3D printing, PLA-PEG-PLA triblock copolymer, poly(lacticacid), toughness}, issn = {2637-6105}, doi = {10.1021/acsapm.4c00428}, author = {Kothavade, Premkumar and Yadav, Prashant and Gopal, Animesh and Pol, Harshawardhan and Kafi, Abdullah and Bateman, Stuart and Shanmuganathan, Kadhiravan} } @article {49103, title = {Fictibacillus fluitans sp. nov., isolated from freshwater pond}, journal = {Archives of Microbiology }, volume = {206}, year = {2024}, month = {FEB}, pages = {70}, type = {Article}, abstract = {

A Gram-positive, aerobic, rod-shaped, spore-forming bacterium, designated NE201(T), was isolated from a freshwater pond in Village Nerur, India. Growth was observed in the range of 15-45 degrees C temperature with optimum at 30 degrees C, pH range of 5-9 (optimum at 7.0), and at concentrations of NaCl ranging between 0 and 14\% (optimum 0\%, w/v). The 16S rRNA gene sequence showed the highest similarity with Fictibacillus enclensis NIO-1003(T) (JF893461) at 99.01\% followed by F. rigui WPCB074(T) (EU939689) at 98.9\% and F. solisalsi CGMCC 1.6854(T) (EU046268) at 98.66\%. The digital DNA-DNA hybridization (dDDH) and orthoANI values for strain NE201(T) against F. enclensis NIO-1003(T) (GCA_900094955.1) were 33.7\% and 87.68\%, respectively. The phylogenetic analysis based on the 16S rRNA gene, 92 core genes derived from the genome, and 20 proteins involving over 20,236 amino acid positions revealed the distinct phylogenetic position of strain NE201(T) and the formation of a clearly defined monophyletic clade with F. enclensis. The strain NE201(T) showed a unique carbon utilization and assimilation pattern that differentiated it from F. enclensis NIO-1003(T). The major fatty acids were anteiso -C-15:0 (51.42\%) and iso-C-15:0 (18.88\%). The major polar lipids were phosphatidylglycerol (PG), phosphatidylethanolamine (PE, and diphosphatidylglycerol (DPG). The antiSMASH analyzed genome of NE201(T) highlighted its diverse biosynthetic potential, unveiling regions associated with terpene, non-ribosomal peptide synthetases (NRPS), lassopeptides, NI-siderophores, lanthipeptides (LAP), and Type 3 Polyketide Synthases (T3PKS). The overall phenotypic, genotypic, and chemotaxonomic characters strongly suggested that the strain NE201(T) represents a novel species of genus Fictibacillus for which the name Fictibacillus fluitans sp. nov. is proposed. The type strain is NE201(T) (= MCC 5285 = JCM 36474).

}, keywords = {Bacillus, Fictibacillus, Freshwater bacteria}, issn = {0302-8933}, doi = {10.1007/s00203-023-03794-4}, author = {Yadav, Amit and Maurya, Akanksha and Bhavsar, Yash and Teware, Ruchi and Bhatt, Agrima and DaCosta, Elaine and Thorat, Vipool and Kirdat, Kiran and Dastager, Syed G.} } @article {49464, title = {Immunogenicity of SARS-CoV-2 vaccines BBV152 (COVAXIN{\textregistered}) and ChAdOx1 nCoV-19 (COVISHIELD{\texttrademark}) in seronegative and seropositive individuals in India: a multicentre, nonrandomised observational study}, journal = {Lancet Regional Health - Southeast Asia}, volume = {22}, year = {2024}, month = {MAR}, type = {Article}, abstract = {

Background:\ There are limited global data on head-to-head comparisons of vaccine platforms assessing both humoral and cellular immune responses, stratified by pre-vaccination serostatus. The COVID-19 vaccination drive for the Indian population in the age group 18-45 years began in April 2021 when seropositivity rates in the general population were rising due to the delta wave of COVID-19 pandemic during April-May 2021.

Methods:\ Between June 30, 2021, and Jan 28, 2022, we enrolled 691 participants in the age group 18-45 years across four clinical sites in India. In this non-randomised and laboratory blinded study, participants received either two doses of Covaxin{\textregistered} (4 weeks apart) or two doses of Covishield{\texttrademark} (12 weeks apart) as per the national vaccination policy. The primary outcome was the seroconversion rate and the geometric mean titre (GMT) of antibodies against the SARS-CoV-2 spike and nucleocapsid proteins post two doses. The secondary outcome was the frequency of cellular immune responses pre- and post-vaccination.

Findings:\ When compared to pre-vaccination baseline, both vaccines elicited statistically significant seroconversion and binding antibody levels in both seronegative and seropositive individuals. In the per-protocol cohort, Covishield{\texttrademark} elicited higher antibody responses than Covaxin{\textregistered} as measured by seroconversion rate (98.3\% vs 74.4\%, p \< 0.0001 in seronegative individuals; 91.7\% vs 66.9\%, p \< 0.0001 in seropositive individuals) as well as by anti-spike antibody levels against the ancestral strain (GMT 1272.1 vs 75.4 binding antibody units/ml [BAU/ml], p \< 0.0001 in seronegative individuals; 2089.07 vs 585.7 BAU/ml, p \< 0.0001 in seropositive individuals). As participants at all clinical sites were not recruited at the same time, site-specific immunogenicity was impacted by the timing of vaccination relative to the delta and omicron waves. Surrogate neutralising antibody responses against variants-of-concern including delta and omicron was higher in Covishield{\texttrademark} recipients than in Covaxin{\textregistered} recipients; and in seropositive than in seronegative individuals after both vaccination and asymptomatic infection (omicron variant). T cell responses are reported from only one of the four site cohorts where the vaccination schedule preceded the omicron wave. In seronegative individuals, Covishield{\texttrademark} elicited both CD4+ and CD8+ spike-specific cytokine-producing T cells whereas Covaxin{\textregistered} elicited mainly CD4+ spike-specific T cells. Neither vaccine showed significant post-vaccination expansion of spike-specific T cells in seropositive individuals.

}, doi = {10.1016/j.lansea.2024.100361.}, author = {Asokan, Mangaiarkarasi S. and Joan, Roshni Florina and Babji, Sudhir and Dayma, Girish and Nadukkandy, Prajitha and Subrahmanyam, Vinutha and Pandey, Archana and Malagi, Girish and Arya, Pooja and Mahajan, Vibhuti and Bhavikatti, Jayateerth and Pawar, Ketakee and Thorat, Aishwarya and Shah, Priyanki and Goud, Ramakrishna B. and Roy, Bishnudeo and Rajukutty, Shon and Immanuel, Sushil and Agarwal,Dhiraj and Saha, Sankhanil and Shivaraj, Akshatha and Panikulam, Patricia and Shome, Rajeshwari and Gulzar, Shah-E-Jahan and Sharma, Anusmrithi U. and Naik, Ajinkya and Talashi, Shruti and Belekar, Madhuri and Yadav, Ritu and Khude, Poornima and V, Mamatha and Shivalingaiah, Sudarshan and Deshmukh, Urmila and Bhise, Chinmayee and Joshi, Manjiri and Inbaraj, Leeberk Raja and Chandrasingh, Sindhulina and Ghose, Aurnab and Jamora, Colin and Karumbati, Anandi S. and Sundaramurthy, Varadharajan and Johnson, Avita and Ramesh, Naveen and Chetan, Nirutha and Parthiban, Chaitra and Ahmed, Asma and Rakshit, Srabanti and Adiga, Vasista and D{\textquoteright}souza, George and Rale, Vinay and George, Carolin Elizabeth and John, Jacob and Kawade, Anand and Chaturvedi, Akanksha and Raghunathan, Anu and Dias, Mary and Bhosale, Anand and Raghu, Padinjat and Shashidhara, L. S. and yakarnam, Annapurna V. and Bal, Vineeta and Kang, Gagandeep and Mayor, Satyajit} } @article {49012, title = {Improved protein dynamics and hydration in the martini3 coarse-grain model}, journal = {Journal of Chemical Information and Modelling }, volume = {64}, year = {2024}, month = {JAN}, pages = {837-850}, type = {Article}, abstract = {

The Martini coarse-grain force-field has emerged as an important framework to probe cellular processes at experimentally relevant time- and length-scales. However, the recently developed version, the Martini3 force-field with the implemented Go model (Martini3Go), as well as previous variants of the Martini model have not been benchmarked and rigorously tested for globular proteins. In this study, we consider three globular proteins, ubiquitin, lysozyme, and cofilin, and compare protein dynamics and hydration with observables from experiments and all-atom simulations. We show that the Martini3Go model is able to accurately model the structural and dynamic features of small globular proteins. Overall, the structural integrity of the proteins is maintained, as validated by contact maps, radii of gyration (Rg), and SAXS profiles. The chemical shifts predicted from the ensemble sampled in the simulations are consistent with the experimental data. Further, a good match is observed in the protein-water interaction energetics, and the hydration levels of the residues are similar to atomistic simulations. However, the protein-water interaction dynamics is not accurately represented and appears to depend on the protein structural complexity, residue specificity, and water dynamics. Our work is a step toward testing and assessing the Martini3Go model and provides insights into future efforts to refine Martini models with improved solvation effects and better correspondence to the underlying all-atom systems.

}, issn = {1549-9596}, doi = {10.1021/acs.jcim.3c00802}, author = {Kharche, Shalmali and Yadav, Manjul and Hande, Vrushali and Prakash, Shikha and Sengupta, Durba} } @article {49642, title = {One-pot catalytic conversion of sucrose to 1,2-propanediol over titania supported Ni-Ce metal catalyst under milder reaction conditions}, journal = {Biomass Conversion and Biorefinery}, volume = {14}, year = {2024}, month = {OCT}, pages = {24703-24714}, type = {Article}, abstract = {

The increased energy demand and decreasing fossil resources have driven the research community to look into a sustainable, green process to meet the energy demands. India being one of the top producers of sugarcane derived sucrose, and conversion of surplus sucrose to value chemicals is always an advantage. 5\%Ni-15\%Ce/TiO2 catalyst is found to produce high yield of 1,2-PDO (similar to 74\%) under very mild reaction condition of 180 degrees C, 30 bar H-2 for 3-h reaction time. The characterization of the catalyst by using various physicochemical methods indicates the synergy between Ni-Ce bimetal which enhances the selective production of glycol. The low temperature and pressure requirement and the advantage of being the one-pot process will always attract the future scope of commercialization.

}, keywords = {Glycol, Low pressure, Low temperature, Ni-Ce catalyst, Sucrose, titania}, issn = {2190-6815}, doi = {10.1007/s13399-023-04781-x}, author = {Sreekantan, Sreejith and Sreedharan, Sarath and Kirali, Arun Arunima Balachandran and Yadav, Parmeshwar and Marimuthu, Banu} } @article {49333, title = {PANI-grafted boron, nitrogen co-doped carbon fiber: An outstanding, high-performance supercapacitor electrode}, journal = {JOURNAL OF ENERGY STORAGE}, volume = {96}, year = {2024}, month = {AUG }, pages = {112668}, type = {Journal Article}, keywords = {Composite, polyaniline, Solid-state supercapacitor}, issn = {2352-152X}, doi = {10.1016/j.est.2024.112668}, author = {Nayan, Rajiv and Sinha, Shubhra and Dixit, Vaibhav and Satnami, Manmohan L. and Ghosh, Kallol K. and Pervez, Shamsh and Deb, Manas Kanti and Shrivas, Kamlesh and Rai, Manish K. and Yenchalwar, Sandeep G. and Wasnik, Kundan and Jadkar, Sandesh R. and Karbhal, Indrapal} } @article {49449, title = {photoarchitectonic hydrogel for synergistic in vitro chemo{\textendash}phototherapy of breast cancer}, journal = {Materials Advances}, volume = {5}, year = {2024}, month = {JAN}, pages = {1903-1916}, type = {Article}, abstract = {

Currently, combinatorial therapy has evoked interest in cancer treatment, and may promote achieving a synergistic effect using cancer medicines. Laser-assisted and pH-responsive therapies have attracted significant attention, and their combination leads to high efficiency cancer treatment. Herein, we developed a chemo{\textendash}phototherapeutic hydrogel comprised of doxorubicin (DOX, a chemotherapeutic drug) and zinc phthalocyanine (ZnPc, a phototherapeutic drug) for combinatorial and synergistic treatment of breast cancer. Firstly, we have developed carbon dots (CDs, size of \~{}5 nm) utilizing lignin and folic acid as biocompatible sources. Then doxorubicin was loaded on the surface of the carbon dots\ via\ conjugation (DOX@CDs). Later on, zinc phthalocyanine and acrylic acid derivatives were utilized to develop a laser-responsive hydrogel (ZnPc-PP H). Afterward, doxorubicin-conjugated carbon dots were incorporated into the photoarchitectonic hydrogel to develop a chemo{\textendash}phototherapeutic drug-loaded hydrogel (DOX@CDs{\textendash}ZnPc-PP H). Subsequently, the\ in vitro\ pH-triggering experiments demonstrated that the hydrogel loaded with both DOX and ZnPc could release the drugs in an acidic environment. Interestingly,\ in vitro\ assays confirmed that DOX@CDs{\textendash}ZnPc-PP H could effectively target breast cancer cells (MCF-7). Furthermore, the developed chemo{\textendash}phototherapeutic hydrogel exhibited non-cytotoxic behavior. Owing to laser assisted reactive oxygen species generation from ZnPc present in the hydrogel, the growth of MCF-7 cells was significantly lowered. In conclusion, all experimental outcomes indicate that the photoarchitectonic hydrogel has the potential to be applied in synergistic chemo- and photodynamic therapy of cancer.

}, doi = {https://doi.org/10.1039/D3MA00900A}, author = {Paul, Shatabdi and Yadav, Binduma and Patil, Mahesh D. and Pujari, Anil Kumar and Singh, Umesh and Rishi, Vikas and Bhaumik, Jayeeta} } @article {49066, title = {Photocatalytic CO2 reduction to syngas using nickel phosphide-loaded CdS under visible light irradiation}, journal = {Journal of Physics-Energy}, volume = {6}, year = {2024}, month = {APR }, pages = {025019}, type = {Article}, abstract = {

Photocatalytic CO2 reduction is a sustainable pathway to produce syngas (H-2 + CO), which is a key feedstock for the production of several important liquid fuels on the industrial scale. However, achieving an appropriate tunable ratio of H-2:CO in syngas for commercial purposes is a challenging task. In this work, we present a low-cost and non-noble metal, phosphide-based co-catalyst-Ni2P-loaded cadmium sulfide (CdS) photocatalyst system, for photocatalytic CO2 reduction. As a co-catalyst, Ni2P fosters an efficient charge separation of photoexcited charges generated in the CdS production of syngas. In total, 3 wt.\% Ni2P/CdS exhibited exceptional performance of 50.6 mu mol g(-1) h(-1) in the CO evolution rate and 115 mu mol g(-1) h(-1) in the H-2 evolution rate, with a syngas composition varying from 2 to 4 in the H-2:CO ratio. Furthermore, first-principles density functional theory calculations were performed to study the surface energetics of the catalyst system and the results are found to be consistent with our experimental findings. Indeed, they establish that the composite favors CO2 photoreduction into syngas more efficiently than pure surfaces.

}, keywords = {CdS, CO2 reduction, Photocatalysis, Syngas, transition metal phosphides}, issn = {2515-7655}, doi = {10.1088/2515-7655/ad3676}, author = {Yadav, Poonam and Kumar, Santosh and Velankanni, Nandhakumar and Kuehne, Thomas D. and Gosavi, Suresh and Raghupathy, Ramya Kormath Madam and Bhosale, Reshma and Held, Georg and Shelke, Manjusha and Ogale, Satishchandra} } @article {49075, title = {Polymerized stimuli-responsive microgel hybrids of silver nanoparticles as efficient reusable catalyst for reduction reaction}, journal = {Heliyon}, volume = {10}, year = {2024}, month = {MAR}, pages = {e26244}, type = {Article}, abstract = {

We have showcased the potential of polymerized hydrogels (PGMs) with uniform -sized stimuliresponsive microgel particles as promising alternatives to prevent aggregation in solution based nanoparticle systems. In the current work, we implemented the PGM concept by embedding anionic stimuli -responsive microgels (PNIPAM-co-AAc)-silver (Ag) hybrids within a hydrogel matrix. These PGM@AgNP hybrid materials are used as catalysts for the reduction of 4-nitrophenol (4 -NP) to 4-aminophenol (4 -AP) in the presence of sodium borohydride. UV-VIS spectroscopy is used for studying catalytic activity. In the solution based system, the complete reduction of 4NP to 4 -AP took 30 minutes with pure Ag nanoparticles, 24 minutes with PNIPAM-Ag hybrid (Neutral) microgels and 15 minutes with PNIPAM-co-AAc-Ag (Anionic) hybrid microgels. In contrast PGM containing PNIPAM-co-AAc-Ag hybrids achieved full reduction in just 15 minutes, along with a 3 -minute induction period. For pure Ag nanoparticles, the first -order rate constant is found to be 0.25 min - 1, for PNIPAM-Ag hybrid (Neutral), it is 0.21 min- 1 and for PNIPAM-coAAc-Ag (Anionic), it is 0.5 min- 1 where as for PGM containing anionic microgel hybrids it is found to be 0.8 min - 1. Furthermore, the reusability of the PGM-Ag (anionic) materials for catalytic activity remains unaltered even after several washings. In summary, our study highlights the effectiveness of PGM@AgNP materials as efficient catalysts for the reduction of 4-nitrophenol to 4-aminophenol, indicating their versatile potential in various catalytic applications.

}, keywords = {Light scattering, Microgel-metal hybrids, Nanomaterial catalysts, PNIPAM microgels, Polymerized hydrogel matrix(PGM, Stimuli-responsive microgels}, doi = {10.1016/j.heliyon.2024.e26244}, author = {Pany, Biswajit and Majumdar, Amrito Ghosh and Bhat, Suresh and Si, Satybrata and Yamanaka, Junpei and Mohanty, Priti S.} } @article {49096, title = {Poly(d,l-lactide-co-glycolide) surface-anchored biotin-loaded irinotecan nanoparticles for active targeting of colon cancer}, journal = {ACS Omega }, volume = {9}, year = {2024}, month = {JAN }, pages = {3807-3826}, type = {Article}, abstract = {

A poly-(d,l-lactide-co-glycolide) (PLGA) copolymer was synthesized using the ring-opening polymerization of d,l-lactide and glycolide monomers in the presence of zinc proline complex in bulk through the green route and was well characterized using attenuated total reflectance-Fourier transform infrared, H-1 and C-13 nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, X-ray diffraction, matrix-assisted laser desorption/ionization time-of-flight, etc. Furthermore, PLGA-conjugated biotin (PLGA-B) was synthesized using the synthesized PLGA and was employed to fabricate nanoparticles for irinotecan (Ir) delivery. These nanoparticles (PLGA-NP-Ir and PLGA-B-NP-Ir) were tested for physicochemical and biological characteristics. PLGA-B-NP-Ir exhibited a stronger cellular uptake and anticancer activity as compared to PLGA-NP-Ir in CT-26 cancer cells (log p \< 0.05). The accumulation and retention of fluorescence-labeled nanoparticles were observed to be better in CT-26-inoculated solid tumors in Balb/c mice. The PLGA-B-NP-Ir-treated group inhibited tumor growth significantly more (log p \< 0.001) than the untreated control, PLGA-NP-Ir, and Ir-treated groups. Furthermore, no body weight loss, hematological, and blood biochemical tests demonstrated the nanocarriers{\textquoteright} nontoxic nature. This work presents the use of safe PLGA and the demonstration of a proof-of-concept of biotin surface attached PLGA nanoparticle-mediated active targeted Ir administration to combat colon cancer. To treat colon cancer, PLGA-B-NP-Ir performed better due to specific active tumor targeting and greater cellular uptake due to biotin.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c07833}, author = {Giram, Prabhanjan S. and Nimma, Ramakrishna and Bulbule, Anuradha and Yadav, Amit Singh and Gorain, Mahadeo and Radharani, Nalukurthi Naga Venkata and Kundu, Gopal C. and Garnaik, Baijayantimala} } @article {49019, title = { Positive role of polyunsaturated fatty acids on sustainable crop production against salt stress: an overview}, journal = {Biologia}, volume = {79}, year = {2024}, month = {JUN}, pages = {1599-1610}, type = {Review}, abstract = {

Abiotic stresses have become more severe and capricious due to global warming and varying climatic conditions, with increased temperature reducing the yield of important agricultural crops due to high evapotranspiration, resulting in the increased amount of soil salinization in arid and semi-arid areas, which has become a significant threat that restricts agricultural practices and leads to the overexploitation of cultivation land. One of the crucial environmental elements limiting plant development and yield is salinity. The special effects of salt stress on the superiority of numerous crops have yet to be discovered. Under salinity, plants tend to activate multiple physiological and biochemical mechanisms to overcome the stress by altering their morphology, photosynthesis, water relations, and biochemical adaptations, such as the antioxidative metabolism response and trigger polyunsaturated fatty acids (PUFAs), which act as a biomarker for salinity stress. With the help of PUFAs, which have become popular as all-purpose defenders, decorative techniques have been created to prevent the consequences of saline. The most prevalent PUFAs in plants are those with 18 carbons, specifically 18:1 (oleic), 18:2 (linoleic), and 18:3 (alpha-linolenic) acids which operate as glycerolipids, a source of energy and carbon in triacylglycerol, precursors of numerous bioactive chemicals, stores of extracellular barrier components, and intrinsic antioxidants, modulating cellular membranes and enhancing crop quality and yield. However, limited information about PUFAs and their roles in enhancing crop stress tolerance is available. Therefore, producers and breeders must understand salinity{\textquoteright}s influence on crop composition to enhance fatty acids under salinity conditions. However, brief work has been reported; this review will help comprehend the role of fatty acids in salinity for food security through the genetic engineering of synthetic genes encoding fatty acids to improve crop stress tolerance and grain quality.

}, keywords = {Cuticle wax, Membrane lipids, photosynthesis, Polyunsaturated fatty acid, ROS, salt stress, Sensing mechanism, stress tolerance}, issn = {0006-3088}, doi = {10.1007/s11756-024-01644-2}, author = {Srivastava, Smita and Yadav, Sagar} } @article {49344, title = {Probing surface interactions in CdSe quantum dots with thiocyanate ligands}, journal = {NANOSCALE}, volume = {16}, year = {2024}, month = {AUG }, pages = {14922-14931}, type = {Journal Article}, keywords = {COLLOIDAL NANOCRYSTALS, STRUCTURAL DYNAMICS, Thin-films}, issn = {2040-3364}, doi = {10.1039/d4nr01507j}, author = {Deshmukh, Samadhan H. and Yadav, Sushma and Chowdhury, Tubai and Pathania, Akhil and Sapra, Sameer and Bagchi, Sayan} } @article {49218, title = {Purification of waste-generated biogas mixtures using covalent organic framework{\textquoteright}s high CO2 Selectivity}, journal = {ACS APPLIED MATERIALS \& INTERFACES}, volume = {16}, year = {2024}, month = {APR}, pages = {22066-22078}, type = {Journal Article}, keywords = {CAPTURE, CARBON-DIOXIDE, Efficiency, Energy, Hydrogen, STORAGE}, issn = {1944-8244}, doi = {10.1021/acsami.4c03245}, author = {Paul, Ratul and Maibam, Ashakiran and Chatterjee, Rupak and Wang, Wenjing and Mukherjee, Triya and Das, Nitumani and Yellappa, Masapogu and Banerjee, Tanmay and Bhaumik, Asim and Venkata Mohan, S. and BabaRao, Ravichandar and Mondal, John} } @article {49332, title = {Regio- and stereoselective construction of 1,3,5-triaroylcyclohexanes via KO t Bu-mediated cyclotrimerization of aryl vinyl ketones}, journal = {Journal of Organic Chemistry}, volume = {89}, year = {2024}, month = {NOV }, pages = {17207-17212}, type = {Article}, abstract = {

Herein, we disclose a simple one-pot method for an efficient regio- and stereoselective synthesis of 1,3,5-triaroylcyclohexanes from aryl vinyl ketones using potassium tert-butoxide. The developed protocol allows the construction of various symmetrically substituted cyclohexanes in good to excellent yields. The major product 2 also can be converted to the product 3 (all equatorial) conveniently by acid catalysis. This protocol features a good substrate scope and functional group compatibility.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.4c01695}, author = {Mahale, Sachin D. and Yadav, Vinita and Gonnade, Rajesh G. and Mhaske, Santosh B.} } @article {49002, title = {Robust spin liquidity in 2D metal-organic framework Cu3 (HHTP)2 with S=1/2 kagome lattice}, journal = {Chemistry- a european journal}, volume = {30}, year = {2024}, month = {JAN }, type = {Article}, abstract = {

On one hand electron or hole doping of quantum spin liquid (QSL) may unlock high-temperature superconductivity and on the other hand it can disrupt the spin liquidity, giving rise to a magnetically ordered ground state. Recently, a 2D MOF, Cu-3(HHTP)(2) (HHTP - 2,3,6,7,10,11-hexahydroxytriphenylene), containing Cu(II) S = 1/2 frustrated spins in the Kagome lattice is emerging as a promising QSL candidate. Herein, we present an elegant in situ redox-chemistry strategy of anchoring Cu-3(HHTP)(2) crystallites onto diamagnetic reduced graphene oxide (rGO) sheets, resulting in the formation of electron-doped Cu-3(HHTP)(2)-rGO composite which exhibited a characteristic semiconducting behavior (5 K to 300 K) with high electrical conductivity of 70 S . m(-1) and a carrier density of similar to 1.1 x 10(18) cm(-3) at 300 K. Remarkably, no magnetic transition in the Cu-3(HHTP)(2)-rGO composite was observed down to 1.5 K endorsing the robust spin liquidity of the 2D MOF Cu-3(HHTP)(2). Specific heat capacity measurements led to the estimation of the residual entropy values of 28 \% and 34 \% of the theoretically expected value for the pristine Cu-3(HHTP)(2) and Cu-3(HHTP)(2)-rGO composite, establishing the presence of strong quantum fluctuations down to 1.5 K (two times smaller than the value of the exchange interaction J).

}, keywords = {2D Metal-organic Framework, Electron doping, Reduced graphene oxide, Spin Liquid, Spin-frustration}, issn = {0947-6539}, doi = {10.1002/chem.202303718}, author = {Ninawe, Pranay and Jain, Anil and Sangole, Mayur and Anas, Mohd and Ugale, Ajay and Malik, Vivek K. and Yusuf, Seikh M. and Singh, Kirandeep and Ballav, Nirmalya} } @article {49223, title = {Selective synthesis of renewable diesel fuel precursors via C-C condensation of biomass-derived furans using a niobium oxide nanocatalyst}, journal = {ACS SUSTAINABLE CHEMISTRY \& ENGINEERING}, volume = {12}, year = {2024}, month = {SEP }, pages = {15923-15934}, type = {Journal Article}, keywords = {2-Methylfuran, Catalysts, dehydration, NB2O5, RANGE ALKANES, solid acid, Valorization}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.4c03886}, author = {Kumar, Mudavath Arun and Swapna, Bhattu and Kalbande, Pavan Narayan and Yalagandula, Lavanya and Singh, Satyapaul A. and Sudarsanam, Putla} } @article {49401, title = {Surface-anchored PtNi alloy network over SiO2 (PtNi/SiO2): a versatile carbon-free cathode for proton exchange membrane fuel cells (PEMFCs)}, journal = {ACS Applied Engineering Materials}, volume = {2}, year = {2024}, month = {APR}, type = {Article}, abstract = {

The large-scale commercialization of the PEMFCs is hindered due to the high cost of the Pt-based electrocatalysts (Pt/C) and the low durability associated with the oxidation of the carbon support in Pt/C. Many Pt-based carbon-free electrocatalysts have been explored, exhibiting excellent stability and activity, but the performance is further expected to be improved by developing suitable Pt alloy catalysts based on the carbon-free supports. To explore this possibility, we have developed a PtNi/SiO2\ alloy system, which acts as a carbon-free electrocatalyst exhibiting enhanced activity for the oxygen reduction reaction (ORR). A half-cell study of PtNi/SiO2\ (45 wt\%) shows \~{}4.3 times higher ORR activity compared to the state-of-the-art Pt/C (40\%). The uniform distribution of the PtNi nanoparticles over SiO2\ is the crucial feature of the catalyst. PtNi/SiO2\ shows better durability even after 5000 cycles compared to the state-of-the-art Pt/C. The catalyst shows a negative shift in the half-wave potential (E1/2) by only 5 mV, which is lower than that of the 11 mV drop incurred by Pt/C. Considering this high activity of the PtNi/SiO2\ catalyst for the ORR, we tried to explore the possibility of demonstrating a single-cell PEMFC in the MEA by pairing the catalyst as the cathode along with the Pt/C as the anode. This paired configuration of the single cell is found to be providing promising performance by delivering a current density of 960 mA/cm2\ at 0.60 V and a maximum power density of 835 mW/cm2. Thus, this study outlines the possibility of developing potential alloy combinations of Pt on carbon-free substrates and then deploying them as electrodes for PEMFC applications. In the context of mitigating the carbon corrosion-related issues without compromising the intrinsic activities of the catalysts, the development of suitable alloy combinations on various carbon-free substrates is of significant technological advantages. The formation of the alloy phase along with the fine and uniform distribution of the alloy nanoparticles on the SiO2\ substrate, followed by its successful deployment as the cathode of a single cell, points toward the scope of exploring material developments in this direction.

}, doi = {https://doi.org/10.1021/acsaenm.4c00091}, author = {Kumar, Sachin and Yoyakki, Athira and Kurungot, Sreekumar} } @article {49626, title = {Synthesis, crystal structure and Hirshfeld surface analysis of N-(4-meth--oxy-phen-yl)picolinamide}, journal = {Acta Crystallographica Section E: Crystallographic Communications}, volume = {80}, year = {2024}, month = {DEC}, pages = {1293-1297}, type = {Article}, abstract = {

The synthesis,\ crystal structure,\ and Hirshfeld surface analysis of\ N-(4-meth-oxy-phen-yl)picolinamide (MPPA), C13H12N2O2, are presented. MPPA crystallizes in the monoclinic\ space groupP21/n, with a single mol-ecule in the\ asymmetric unit.\ Structural analysis reveals that all non-hydrogen atoms are nearly coplanar, and the mol-ecule exhibits two intra-molecular hydrogen bonds that stabilize its conformation. Supra-molecular features include significant inter-molecular inter-actions, primarily C{\textemdash}H...π\ and various hydrogen bonds, contributing to the overall crystal cohesion, as confirmed by energy framework calculations yielding a total inter-action energy of -138.3 kJ mol-1. Hirshfeld surface analysis indicates that H...H inter-actions dominate, followed by C...H and O...H inter-actions, highlighting the role of\ van der Waals forces\ and hydrogen bonding in crystal packing.

}, doi = {https://doi.org/10.1107/S2056989024010843}, author = {Burieva, Dilnoza and Torambetov, Batirbay and Bobonazarova, Sarvinoz and Abdushukurov, Anvar and Kholikov, Tursinali and Khan, Akram A and Ashurov, Jamshid and Yusufov, Mukhriddin} } @article {49049, title = {Utility of metagenomics for bioremediation: a comprehensive review on bioremediation mechanisms and microbial dynamics of river ecosystem}, journal = {Environmental Science and Pollution Research}, volume = {31}, year = {2024}, month = {MAR}, pages = {18422-18434}, type = {Review}, abstract = {

Global industrialization has contributed substantial amounts of chemical pollutants in rivers, resulting in an uninhabitable state and impacting different life forms. Moreover, water macrophytes, such as water hyacinths, are abundantly present in polluted rivers, significantly affecting the overall water biogeochemistry. Bioremediation involves utilizing microbial metabolic machinery and is one of the most viable approaches for removing toxic pollutants. Conventional techniques generate limited information on the indigenous microbial population and their xenobiotic metabolism, failing the bioremediation process. Metagenomics can overcome these limitations by providing in-depth details of microbial taxa and functionality-related information required for successful biostimulation and augmentation. An in-depth summary of the findings related to pollutant metabolizing genes and enzymes in rivers still needs to be collated. The present study details bioremediation genes and enzymes functionally mined from polluted river ecosystems worldwide using a metagenomic approach. Several studies reported a wide variety of pollutant-degrading enzymes involved in the metabolism of dyes, plastics, persistent organic pollutants, and aromatic hydrocarbons. Additionally, few studies also noted a shift in the microbiome of the rivers upon exposure to contaminants, crucially affecting the ecological determinant processes. Furthermore, minimal studies have focused on the role of water-hyacinth-associated microbes in the bioremediation potentials, suggesting the need for the bioprospecting of these lesser-studied microbes. Overall, our study summarizes the prospects and utilities of the metagenomic approach and proposes the need to employ it for efficient bioremediation.

}, keywords = {Bioremediation, Metagenomics, Rivers, Water hyacinth, Xenobiotic}, issn = {0944-1344}, doi = {10.1007/s11356-024-32373-3}, author = {Yadav, Rakeshkumar and Dharne, Mahesh} } @article {49112, title = {Wide temperature enhanced sodium storage in tailored, sustainable sodiophilic biphasic N-doped carbon}, journal = {Materials Today Chemistry }, volume = {37}, year = {2024}, month = {APR}, type = {Article}, abstract = {

Alternative to Li-ion batteries(LIB), Na-ion batteries (NIB) and Na metal batteries (NMB) are gaining significant attention due to their low cost, abundance, and safety. By modulating microstructural properties such as graphitization, heteroatom doping, surface-rich functional groups, and interlayer d-spacing, Na-ion storage in NIB and Na plating/striping in NMB can be ameliorated. This study reports sodiophilic N-doped polymer-derived carbon (PDC) as an anode for NIB and host for Na metal in NMB. As NIB anode, PDC provides a storage capacity of 173 mAh g- 1 at 1 A g- 1 in half-cell and 84 mAh g- 1 at 1C (1C = 128 mAhg- 1) in full-cell with Na3V2(PO4)2F3 (NVPF) cathode. As Na metal anode (NMA) host, a high columbic efficiency (C.E.) of 99.45\% for over 1000 cycles at 6 mA cm- 2_4 mAh cm-2 is obtained. Furthermore, fascinating wide temperature (50 degrees C and -20 degrees C) sodiumion storage is successfully demonstrated by PDC. Advanced X-ray photoelectron spectroscopy (XPS) confirmed the formation of stable and uniform solid electrolyte interphase (SEI) composed of inorganic and organic components, X-ray microtomography confirmed uniform Na plating throughout the volume of the electrode analogous to Brunauer-Emmett-Teller (BET) surface area, Raman spectroscopy, X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) results. A sustainable and scalable promising biphasic NIB anode and sodiophilic host for Na metal was possible due to larger d-spacing, partial graphitization, high mesoporosity, N-doping, presence of surface functional groups, better charge transfer, and diffusion properties.

}, keywords = {Full-cell, Low and elevated temperatures, Na metal host, Polymer-derived carbon, Sodium-ion battery, X-ray tomography}, issn = {2468-5194}, doi = {10.1016/j.mtchem.2024.101978}, author = {Yadav, Poonam and Das, Anoushka K. and Torris, Arun and Wasnik, Kundan and Koppisetti, Heramba Venkata Sai Rama Murthy and Pol, Vilas G. and Shelke, Vilas and Shelke, Manjusha} } @article {49606, title = {Benchmarking a dual-scale hybrid simulation framework for small globular proteins combining the CHARMM36 and Martini2 models}, journal = {Journal of Molecular Graphics \& Modelling}, volume = {135}, year = {2025}, month = {MAR}, pages = {108926}, type = {Article}, abstract = {

Multi-scale models in which varying resolutions are considered in a single molecular dynamics simulation setup are gaining importance in integrative modeling. However, combining atomistic and coarse-grain resolutions, especially for coarse-grain force fields derived from top-down approaches, have not been well explored. In this study, we have implemented and tested a dual-resolution simulation approach to model globular proteins in atomistic detail (represented by the CHARMM36 model) with the surrounding solvent in Martini2 coarse-grain detail. The hybrid scheme considered is an extension of a model implemented earlier for mainly lipid and water molecules. We have considered a set of small globular proteins and have extensively compared to atomistic benchmark simulations as well as a host of experimental observables. We show that the protein structural dynamics sampled in the hybrid scheme is robust, and the intra-protein contact maps are reproduced, despite increased fluctuations of the loop regions. A good match is observed with experimental small angle X-ray scattering (SAXS) and NMR observables, such as chemical shifts and (3)J((HN-H alpha))-coupling, with the best match obtained for the chemical shifts. However, deviations are observed in the water dynamics and protein-water interactions which we attribute to the limitation of solvent screening in the coarse-grain force field. The computational speed-up achieved is about 2-3 times compared to an all-atom system. Overall, the hybrid model is able to retain the main features of the underlying atomistic conformational landscape with a two-fold speed-up in computational cost.

}, keywords = {Hybrid simulations, Martini force-field, Mixed models, Multi-scale simulations}, issn = {1093-3263}, doi = {10.1016/j.jmgm.2024.108926}, author = {Yadav, Manjul and Kharche, Shalmali and Prakash, Shikha and Sengupta, Durba} } @article {49569, title = {Carbon capture from flue gases using an integrated membrane skid}, journal = {Journal of Membrane Science}, volume = {718}, year = {2025}, month = {MAR}, pages = {123674}, type = {Article}, abstract = {

A prototype spiral-wound (SW) membrane module with a commercial-size diameter of 8 {\textquoteleft}{\textquoteright} and a membrane area of 35 m(2) was fabricated using a new thin-film-composite facilitated transport membrane (FTM) scaled up to 21 {\textquoteleft}{\textquoteright} in width by a continuous roll-to-roll coating process. This SW module was tested with an actual coal flue gas at the Center for Applied Energy Research (CAER) at the University of Kentucky, which exhibited an average CO2 permeance of 4269 GPU with a CO2/N-2 selectivity of 165 and remained stable for 100 h. The permeance and selectivity results are consistent with those determined from lab and scale-up flat-sheet samples. An integrated membrane skid was then constructed, where 2 SW membrane modules were arranged to form an enriching cascade. The 8 {\textquoteleft}{\textquoteright}-diameter prototype SW module previously tested at CAER was installed as the primary CO2 capture stage, while a smaller SW module (5 {\textquoteleft}{\textquoteright} diameter and 12 m(2) membrane area) was used to further enrich the CO2 to \>95\% purity. By using a simulated coal flue gas (13\% CO2), the skid was operated at steady-state for 800 h with 91.0\% of the CO2 removed from the flue gas, delivering 1.33 tonne/day CO2 product at 95.5\% dry purity. The bench skid was then installed at the National Carbon Capture Center (NCCC), Wilsonville, AL and tested with an actual natural gas (NG) flue gas (8.6\% CO2). 90-99\% CO2 capture degrees were demonstrated during the parametric testing, and the skid was operated at steady state for 500 h cumulatively with 91.0\% CO2 capture and \>95\% CO2 purity. A simulated natural gas combined cycle (NGCC) flue gas (4.3\% CO2) slipstream was further provided by diluting the NG flue gas with air, and 90-99\% CO2 capture degrees were also achieved with dry CO2 purities all above 95\%. All these capture degrees and CO2 purities were in good agreement with their model predictions.

}, keywords = {Actual flue gas, carbon capture, Field trial, Integrated membrane skid, Membrane module}, issn = {0376-7388}, doi = {10.1016/j.memsci.2024.123674}, author = {Yang, Yutong and Han, Yang and Prasad, Babul and Pang, Ruizhi and Zou, Changlong and Ho, W. S. Winston} } @article {49714, title = {Development of novel ssDNA aptamers for detection of receptor-binding domain of SARS-COV-2}, journal = {ACS Omega}, volume = {10}, year = {2025}, month = {JUN }, pages = {23981-23992}, type = {Article}, abstract = {

The highly virulent and transmissible SARS-CoV-2 causes COVID-19 and poses a global public health threat. Herein cloned, expressed, and the molecular weight of the receptor-binding domain (RBD) of the SARS-CoV-2 gene encoding protein was confirmed by SDS-PAGE electrophoresis and Western blot analysis. The pivotal aim is to develop single-stranded DNA (ssDNA) aptamers for the rapid detection of SARS-COV-2 infections in humans. In this investigation, a library of nine novel ssDNA aptamers was developed by several rounds of systematic evolution of ligands by an exponential enrichment approach and assessed by an enzyme-linked aptamer assay for binding affinity against RBD antigen (Ag). An in vitro assay resulted in a varied colorimetric signal that depends on the nature of aptamer. Quantitative determination of AptRBD3, AptRBD6, and AptRBD8 aptamers exhibited excellent binding affinity against Ag in the range of 5-10 ng/mL. The putative AptRBD3, AptRBD6, and AptRBD8 aptamers were converted into peptide sequences and docked against RBD, exhibiting good binding energy of -6.8, -6.3, and -7.1 kcal/mol respectively, which were recorded. Furthermore, docking studies of ssDNA aptamers were performed using HDOCK web server to ascertain the binding mechanism and docking score perceived as -389.74, -404.28, and -390.37. Despite this, we engineered a high-affinity AptRBD3.3 aptamer that formed a single and bulged loop, which improved binding affinity, resulted in a docking score of -361.56, and exhibited sensitivity at 4 ng of Ag of SARS-CoV-2. Moreover, computational modeling of AptRBD3.3 revealed an intriguing significant binding affinity with the RBD mutant SARS-CoV-2 S-UK variant (PDB ID: 7EDG) with a docking score of -350.21. In conclusion, the AptRBD3.3 aptamer can be used for the development of lateral flow device and electrochemical sensors for rapid, low-cost, and accurate detection of COVID-19 infection in humans for point of care diagnostics.

}, issn = {2470-1343}, doi = {10.1021/acsomega.4c03580}, author = {Auti, Amogh and Yadav, Pranay and Bodkhe, Rahul and Bhandari, Yogesh and Varma, Sanjana and Chaudhari, Bhushan and Rahi, Shraddha and Ghormade, Vandana and Vamkudoth, Koteswara Rao} } @article {49682, title = {Growth of Mo-doped Ni3S2 nanorods array for superior overall water splitting reaction}, journal = {International Journal of Hydrogen Energy}, volume = {141}, year = {2025}, month = {JUN}, pages = {729-737}, type = {Article}, abstract = {

Designing novel, efficient and cost-effective dual-functional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) using an alkaline electrolyte is crucial for establishing a sustainable hydrogen economy and transitioning to a society powered by renewable energy sources. In the present work, Mo-doped nickel sulfide (Mo-Ni3S2) nanorods were grown on Ni-treated nickel foam (N-NF) substrate via a two-steps hydrothermal method. Specifically, Mo-Ni3S2/N-NF surface consists of nanorods-like morphology, which provides extensive area for percolation of electrolyte, that resulting in outstanding catalytic performance. Such a well-synthesized electrode exhibited superior performance and stability for OER as compared with pristine Ni3S2/NF and bare nickel foam (NF) electrodes. In addition, Mo-Ni3S2/N-NF electrode provides good HER activity and confirms its dual-functionality in alkaline medium. Our champion Mo-Ni3S2/N-NF electrocatalyst delivers best OER overpotential of 230 mV at current density of 100 mA/cm(2). Also, it provides HER overpotential of 100.6 mV at a current density of 10 mA/cm(2). Both OER and HER are carried out in the presence of 1 M KOH alkaline electrolyte. OER stability of the best-performed Mo-Ni3S2/N-NF electrode demonstrates almost constant current density similar to 120 mA/cm(2), which retains 90\% of original value after continuously tested for the duration of 22 h. The total cell voltage of 1.56 V is provided by Mo-Ni3S2/N-NF integrated system and it demonstrates a good stability for duration of 22 h. Our approach provides a new insight into developing earth-abundant, inexpensive and superior dual-functional electrocatalyst for overall water splitting reaction (WSR).

}, keywords = {Dual-functional electrocatalyst, HER, Mo doping, Nickel sulfide nanorods, OER, overall water splitting}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2024.09.055}, author = {Sharma, Pooja and Khandare, Lina and Saha, Arindam and Chaure, Nandu B. and Yengantiwar, Ashish} } @article {49577, title = {High-performance polysulfide-trapping lithium sulfur battery cathode: cubic Co3O4 catalyst within a nitrogen-doped entangled graphene framework}, journal = {ChemElectroChem}, volume = {12}, year = {2025}, month = {FEB}, pages = {e202400488}, type = {Article}, abstract = {

The cycling performance of lithium-sulfur (Li-S) batteries is hampered by polysulfide dissolution which impacts the overall performance of Li-S batteries. Here we report the synthesis and characterization of polysulfide trapping cathode material for Li-S batteries based on Co3O4 nanocubes supported within a nitrogen-doped entangled graphene (Co3O4/NEGF). The highly porous conductive graphene network is shown to facilitate fast electron transport and ion diffusion while the nitrogen dopants and polar Co3O4 offer both abundant active sites for polysulfide conversion while promoting intermediate polysulfide binding. The porous structure allows for high sulfur loading of 76.4 wt \% (S@Co3O4/NEGF), while efficiently accommodating volumetric expansion during charge-discharge. The Co3O4/NEGF cathode composite exhibited a high specific capacity of 1143 mAh g-1 at a current density of C/20 and maintained a 79 \% reversible capacity after 200 cycles at C/5.

}, issn = {2196-0216}, doi = {10.1002/celc.202400488}, author = {Manna, Narugopal and Soni, Roby and Young, R. S. and Jervis, Rhodri and Miller, Thomas S.} } @article {49526, title = {Investigations into the nucleation dynamics of the stable Na-metal anode: revealing the role of a tin-infused carbon nanofiber interlayer}, journal = {ACS Applied Materials \& Interfaces}, volume = {17}, year = {2025}, month = {FEB}, pages = {12281-12290}, type = {Article}, abstract = {

Fundamental understanding and controlling of sodium nucleation are essential for enhancing the performance, safety, and longevity of sodium metal batteries, which is not yet clearly understood in the case of sodium metal batteries. The present study showcases how a modification in the host material influences nucleation kinetics. Current-time transient studies on copper, carbon nanofiber, and tin-embedded carbon nanofiber interlayers employing the Scharifker-Hills model elucidate the mode of nucleation. This work tries to delve deep and presents a case study on how a tin-based interlayer can not only minimize the barrier for sodium nucleation but also direct the sequential progressive and instantaneous nucleation of sodium metal while reducing the overpotential substantially, resulting in crystalline, uniform Na-metal deposition. Further, to account for the complex dynamics of solid electrolyte interphase (SEI) formation distinctly associated with alkali metal deposition, the SEI-fracture model has been included, and the quantification of electrochemical nucleation parameters is obtained. The results provide important insights into the sodium nucleation mechanism, paving the way to counter dendrite formation and SEI dissolution issues of the Na-metal anode.

}, keywords = {overpotential, progressiveand instantaneous nucleation, Scharifker-Hills model, SEI-fracture model, tin interlayer}, issn = {1944-8244}, doi = {10.1021/acsami.4c21837}, author = {Wasnik, Kundan and Yadav, Poonam and Ahuja, Manuj and Mirzapure, Vinay and Johari, Priya and Shelke, Manjusha V.} } @article {49705, title = {Metabolomic profiling unravels the role of sphingolipid pathways in spot blotch resistance in wheat}, journal = {Acta Physiologiae Plantarum}, volume = {47}, year = {2025}, month = {JUN}, pages = {67}, type = {Article}, abstract = {

Spot blotch, caused by the soil- and air-borne fungal pathogen Bipolaris sorokiniana, is a major threat to wheat production. The disease is reaching epidemic proportions in wheat-growing areas, particularly in South Asia, South America, Africa, and Australia. In India, over 25 million hectares of wheat-growing area is threatened by this disease. A systematic study of metabolites can provide insights into the molecular basis of this disease. In the present study, we evaluated the impact of B. sorokiniana inoculation on two wheat varieties, Chirya3 (resistant to spot blotch) and DDK1025 (susceptible to spot blotch). We performed time-course non-targeted metabolite profiling of the pathogen-inoculated and mock-inoculated plants using liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS). Multivariate analysis was performed to construct a comprehensive statistical workflow, which led to the defined {\textquoteleft}{\textquoteleft}metabolomic phenotypes{\textquoteright}{\textquoteright}. Modeling by Orthogonal Projection to Latent Structures-Discriminant Analysis (OPLS-DA) revealed significant metabolites in responses of the resistant and susceptible varieties to pathogen inoculation. A total of 699 metabolites displayed significant variations during the progression of infection. B. sorokiniana-inoculated Chirya3 exhibited high levels of some metabolites, such as sphingolipids, cysteine, phenylalanine, shikimates, etc. The study revealed that sphingolipid pathways are critical in resistance mechanisms contributing to enhanced lignification and disease resistance in wheat.

}, keywords = {Cochliobolus sativus, High-resolution mass spectrometry, LC-HRMS, Metabolite profiling, OPLS-DA, plant-pathogen interaction}, issn = {0137-5881}, doi = {10.1007/s11738-025-03813-5}, author = {Yadav, Sagar and Maiti, Saborni and Mundhe, Swapnil and Kadoo, Narendra} } @article {49534, title = {Metal deficiency tuned charge transfer in intermetallic Ni2-xSn (x =0.37-0.65) enhances selective conversion of furfural to furfuryl alcohol towards the theoretical limit}, journal = {Journal of Materials Chemistry A}, volume = {13}, year = {2025}, month = {FEB}, pages = {6042-6048}, type = {Article}, abstract = {

Heterogeneous catalysis facilitated by intermetallic nanoparticles has recently been the subject of increased scrutiny, given the enhanced selectivity and stability they bestow on many chemical reactions compared to their monometallic components. This paper explores a series of Ni-Sn (Ni2-xSn, where x = 0.65, 0.5, 0.37) intermetallic compounds supported on a high-surface-area support, SBA-15, as catalysts for the selective hydrogenation of furfural to furfuryl alcohol. Rietveld refinements of the X-ray diffraction data show catalysts with mixed intermetallic phases that assist in the catalysis. At the same time, X-ray photoelectron spectroscopy (XPS) studies and X-ray absorption studies indicate the role played by charge transfer from Sn to Ni for the catalysis. Selectivity to the desired furfuryl alcohol in all the intermetallic samples was high (\>97\%), but Ni1.35Sn had a relatively lower conversion than the other intermetallic compounds.

}, issn = {2050-7488}, doi = {10.1039/d4ta06383j}, author = {Cherevotan, Arjun and Singh, Ashutosh Kumar and Yadav, Anish and Maligal-Ganesh, Raghu V. and Raj, Jithu and Pulparambil, Anu and Goud, Devender and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {49504, title = {Pt-based 3D electrocatalyst with process-friendly features for PEMFCs possessing fast activation and improved mass-transfer properties}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {APR}, type = {Article}, abstract = {

Polymer-electrolyte-membrane fuel cells (PEMFCs) face the challenges like slow oxygen reduction reaction (ORR) kinetics and limited mass transport at high current densities, which affects their performance. The efficient water removal from the cathode is essential to improve oxygen diffusion. Addressing this, a catalyst is presented with platinum (Pt) nanoparticles distributed within a 3D carbon network (Pt/3DPDC) derived from the polydopamine-coated melamine foam. This unique architecture enhances Pt utilization and water management due to its high porosity and ample free spaces, providing a process-friendly feature for the electrode under PEMFC conditions. The pores and accessible texture of the 3D polydopamine derived carbon (3DPDC) framework facilitate ionomer uptake during the electrode fabrication, extending the active triple-phase boundary and improving the membrane electrode assembly (MEA) performance. The high porosity of Pt/3DPDC is mitigated by adding a small amount of commercial fuel cell catalayst (Pt/C), which maintains the effective catalyst number density per unit area by utilizing the excess porosity of the 3DPDC framework. This controlled interplay of the unique catalyst structure and spatially confined distribution of Pt/C within the Pt/3DPDC framework offers fast activation, reduced electrode flooding, and improved current densities across the operating potential window. This carefully engineered catalyst, designed through bottom-up strategies, is a promising electrocatalyst for practical PEMFC applications.

}, keywords = {Oxygen Evolution Reaction, oxygen reduction reaction, rechargeable flexible zinc-air battery}, issn = {2366-7486}, doi = {10.1002/adsu.202400904}, author = {Pandikassala, Ajmal and Nadumattuvayil, Varsha and Singh, Mayank U. and Jadhav, Swapnil D. and Yoyakki, Athira and Kurungot, Sreekumar} } @article {49715, title = {Sila[1]ferrocenophanes with Bulky Substituents}, journal = {European Journal of Inorganic Chemistry}, volume = {28}, year = {2025}, month = {MAY }, type = {Article}, abstract = {

In this study, sila[1]ferrocenophanes with sterically bulky groups such as tris(trimethylsilyl) or N-heterocyclic iminato located at the bridging silicon atom are synthesized. The reactions of silicon-bound chloride in Fe(eta 5-C5H4)2SiCl2 (1) with K[Si(SiMe3)3] and silylated N-heterocyclic imine result in sila[1]ferrocenophanes 2 and 3 with bulky silicon- and nitrogen-based substituents at the ansa-bridge via elimination of KCl and Me3SiCl. Subsequently, the reduction of 1 is attempted using 2,3,5,6-tetramethyl-1,4-bis(trimethylsilyl)-1,4-dihydropyrazine (popularly known as Mashima reagent), which leads to the elimination of Me3SiCl and generation of 1,4-dihydropyrazine-spanned sila[1]ferrocenophanes (4). All the compounds are structurally characterized.

}, keywords = {ansa-bridges, ferrocenophanes, hypersilyls, Mashima reagents, N-heterocyclic imines}, issn = {1434-1948}, doi = {10.1002/ejic.202500120}, author = {Ajithkumar, V. S. and Bisai, Milan Kumar and Yuvaraj, K. and Gonnade, Rajesh G. and Sen, Sakya S.} } @article {49495, title = {Unlocking enhanced redox dynamics: the power of a bifunctional catalytic zinc phosphide interface in full cell and pouch lithium-sulfur batteries}, journal = {ACS Applied Materials \& Interfaces}, volume = {17}, year = {2025}, month = {JAN}, pages = {7657-7669}, type = {Article}, abstract = {

Lithium-sulfur (Li-S) batteries face significant challenges, such as polysulfide dissolution, sluggish reaction kinetics, and lithium anode corrosion, hindering their practical application. Herein, we report a highly effective approach using a zinc phosphide (ZnP2) bifunctional catalyst to address these issues. The ZnP2 catalyst effectively anchors lithium polysulfides (LiPSs), catalytically reactivates them, and enhances lithium-ion diffusion. Utilizing a ZnP2-modified separator in a Li-S half-cell achieves an impressive initial capacity of 1145.4 mAh g-1, retaining 954 mAh g-1 and 99.8\% Coulombic efficiency after 100 cycles, compared to the pristine separator. The underlying reaction mechanisms are thoroughly investigated through post-mortem analyses and density functional theory (DFT) calculations. Moreover, a Li-S full cell with an E/S ratio of 10 mu L mg-1 demonstrates stable cycling performance, achieving an initial capacity of 797.5 and 534 mAh g-1 after 100 cycles at 0.1C, with a negative-to-positive mass ratio of 3:1. Additionally, the real-world feasibility of lightweight and flexible Li-S pouch batteries with ZnP2-modified separators is explored, showing a stable performance over 100 cycles at 0.1C with 80\% capacity retention. This engineered separator can be integrated with advanced sulfur cathodes to create high-energy-density, stable Li-S batteries for commercial applications.

}, keywords = {catalytic interlayer, full cell, lithium dendrite, lithium sulfur battery, polysulfide shuttling, pouchcell}, issn = {1944-8244}, doi = {10.1021/acsami.4c17192}, author = {Das, Anoushka K. and Yadav, Poonam and Verma, Tushar S. and Marulasiddappa, Thripuranthaka and Krishnamurty, Sailaja and Shelke, Manjusha V.} } @article {49712, title = {Vastly increased mesophase range due to superstructure formation from in situ prepared gold nanoparticles with liquid crystalline ligands: toward enhanced optoelectronic applications}, journal = {ACS Applied Nano Materials}, volume = {8}, year = {2025}, month = {MAY }, pages = {10340-10350}, type = {Article}, abstract = {

Gold nanoparticle (Au NP)-liquid crystal (LC) composites have gained considerable interest in developing cutting-edge electro-optical materials. This study introduces an innovative synthetic approach that significantly augments the capabilities of Au NP-LC composites by utilizing an amine-functionalized LC as both a reducing and capping agent in the refined Brust-Schiffrin method. In its standard form, this method yields Au NP-LC composites with appealing features like improved clearing temperature. However, the optical characteristics do not display any additional features and resemble simple LC-ligand functionalized Au NP, attributed here to the surplus LC employed to obtain the dual capabilities of reduction and capping. Thus, it was gratifying to observe a dramatic enhancement in mesophase stability with the removal of just a few percentages of excess LC, which is attributed to a remarkable and unprecedented one-dimensional superstructure formation. Furthermore, the removal of surplus LC caused the composite to exhibit Fano-like resonance in the UV-vis spectrum, a noteworthy optical feature likely resulting from dynamic plasmonic interactions, including plasmon-polariton interactions and lattice plasmon modes. Thus, the simple yet robust protocol employed yields Au NP-LC composites with an ultrawide thermal range of the mesophase that paves the way for realizing next-generation electro-optic materials featuring enhanced performance and response.

}, keywords = {Fano-resonance, gold nanoparticles, liquid crystals, nanosoftcomposites, superstructure}, doi = {10.1021/acsanm.5c00923}, author = {Duggal, Muskan and Khatavi, Santosh and Yelamaggad, Channabasaveshwar V. and Shankar Rao, Doddamane Sreenivasamurthy and Krishna Prasad, Subbarao and Prasad, Bhagavatula L. V.} }