@article { ISI:000232775100003, title = {Green process for chlorine-free benzaldehyde from the solvent-free oxidation of benzyl alcohol with molecular oxygen over a supported nano-size gold catalyst}, journal = {Green Chemistry}, volume = {7}, number = {11}, year = {2005}, month = {OCT}, pages = {768-770}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Benzyl alcohol is oxidized selectively to benzaldehyde with high yield, with a little formation of benzylbenzoate, by molecular oxygen over a reusable nano-size gold catalyst supported on U3O8, MgO, Al2O3 or ZrO2 in the absence of any solvent.

}, issn = {1463-9262}, doi = {10.1039/b509003b}, author = {Choudhary, Vasant R. and Dhar, A. and Jana, Prabhas and Jha, Rani and Uphade, B. S.} } @article { ISI:000227966600021, title = {Insight into the mechanism of selective mono-N-methylation of aniline on Cu1-xZnxFe2O4: a DRIFTS study}, journal = {Journal of Molecular Catalysis A - Chemical}, volume = {231}, number = {1-2}, year = {2005}, month = {APR}, pages = {169-180}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mechanism of selective mono-N-methylation of aniline with methanol on Cu1-xZn2FeO4 catalysts was investigated in detail. The interaction of reactants (aniline. methanol and methanol: aniline) and possible products (N-methylaniline (NMA), N,N-dimethylaniline (DMA) and o-toluidine (OT)) on catalysts surface was studied by temperature-dependent in situ FTIR spectroscopy. Methanol adsorbs dissociatively over catalysts surface at 373 K as methoxy species and is oxidized to formate species at high temperature through dioxymethylene and/or formaldehyde as a surface intermediate species. On the other hand, adsorption of aniline:methanol mixtures shows that methanol oxidation was completely hindered in the presence of aniline. Aniline adsorbs on the Lewis acid sites at \<= 373 K with phenyl ring oriented in a perpendicular manner to the catalyst surfaced however, N-H bond scission occurs above 373 K. A comparison of adsorbed NMA and methanol: am line (3:1) mixture on Cu0.5Zn0.5Fe2O4 shows NMA forms from the reaction mixture at 473 K. However, maximum activity at 573 K in catalytic reaction studies suggests that desorption limits the methylation kinetics. FTIR study displays stable aniline and methyl species on ZnFe2O4 even at 573 K; however. no methyl species is detected on Cr0.95Zn0.05Fe2O4 at 473 K due to methanol reforming reaction and that limits the overall reaction and hence low catalytic activity. It is proposed that methanol is protonated on catalysts surface by the labile H+ due to N-H bond scission. Co-adsorption of acidity probes with aniline and methanol indicates that aniline methylation takes place at single acid-base site. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Aniline, Cu1-xZnxFe2O4, desorption limited, DRIFT, IR, Methanol, N-methylaniline, N-methylation, reaction mechanism}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.01.014}, author = {Vijayaraj, M. and Murugan, B. and Shubhangi B. Umbarkar and Hegde, S. G. and Gopinath, Chinnakonda S.} } @article { ISI:000229454100009, title = {Lilliputian hardware platform for scientific applications}, journal = {International Journal of Software Engineering and Knowledge Engineering}, volume = {15}, number = {2}, year = {2005}, note = {1st International Embedded and Hybrid Systems Conference, Singapore, SINGAPORE, MAY 11-13, 2005}, month = {APR}, pages = {189-192}, publisher = {WORLD SCIENTIFIC PUBL CO PTE LTD}, type = {Article, Proceedings Paper}, address = {5 TOH TUCK LINK, SINGAPORE 596224, SINGAPORE}, abstract = {

Microcontroller plays an important role in gearing up scientific applications for measurements, data acquisition and controls. With the advent of technology in microcontrollers, a new era in the form of microconverter is available at the user{\textquoteright}s doorstep. Benefited by the excellent features of Analog Devices{\textquoteright} microconverter chip ADuC 842, an attempt has been made to develop a Lilliputian platform for scientific applications at National Chemical Laboratory (NCL), Pune. A real time system has been developed for measuring surface tension exerted by Langmuir films formed at air water interface. The films are compressed by smooth and precision barrier mechanism through DC motor in a controlled manner. (IC)-C-2 compatible EEPROM is provided on board for data storage and it can be communicated to a PC through RS232 link for further analysis. The other features provided are, In-circuit programming for firmware updating, keyboard functioning for special routine executions, (IC)-C-2 compatible RTC and battery backup. The software has been completely developed using assembly language programming. Intelligent Lilliputian platform designed using ADuC 842 chip and graphic LCD for real time plotting of surface pressure area isotherm of Langmuir films has been developed and tested successfully at NCL.

}, keywords = {Langmuir films, microconverter}, issn = {0218-1940}, doi = {10.1142/S0218194005002361}, author = {Iyer, Neelima and Khatavkar, Rupali and Joshi, Bhagyashree and Upadhye, V.} } @article { ISI:000234037500002, title = {Modeling of rotary desiccant wheels}, journal = {Chemical Engineering \& Technology}, volume = {28}, number = {12}, year = {2005}, note = {Joint 5th International Symposium on Catalysis in Multiphase Reactors/4th International Symposium on Multifunctional Reactors, Portoroz-Portorose, SLOVENIA, JUN 15-18, 2005}, month = {DEC}, pages = {1473-1479}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Rotary desiccant wheels are widely used in dehumidification and energy recovery applications. In this work, we have developed a 2D, steady state model of a rotary desiccant wheel. Mass and energy balance equations for the air streams and the desiccant wheels were developed. The hydraulic diameter and surface area for heat and mass transfer were calculated based on knowledge of the flute geometry. Appropriate correlations for the Sherwood number and Nusselt number were used to estimate heat and mass transfer coefficients. The model is capable of predicting steady state behavior of desiccant wheels having at the most three sections (process, purge, and regeneration). The mathematical model was validated using a real desiccant wheel, and the calculation results are in reasonable agreement with the experimental data. Based on this model, the temperature and humidity profiles in the wheel during both the dehumidification and the regeneration processes are analyzed. The simulated results were used to gain an insight into the operation of desiccant wheels. The model and the presented results will be useful for optimizing dehumidification and energy recovery applications.

}, keywords = {1, 4-benzodioxan-2-carboxylate, 4-benzodioxan-2-carboxylic acid, doxazosin, enantio selectivity, enantiomeric ratio, ethyl 1, ethyl acetate, Lipases, transesterfication}, issn = {0930-7516}, doi = {10.1002/ceat.200500164}, author = {Harshe, Yogesh M. and Utikar, R. P. and Ranade, V. V. and Pahwa, D.} } @article { ISI:000230436500003, title = {Photoluminescent core-shell particles of organic dye in silica}, journal = {Journal of Luminescence}, volume = {114}, number = {1}, year = {2005}, month = {JUL}, pages = {15-23}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Using a single silica precursor, Rhodamine 6G organic dye molecules have been entrapped in silica particles resulting into core-shell particles of similar to 500 nm diameter. Energy dispersive X-ray analysis, X-ray photoelectron spectroscopy and transmission electron microscopy analysis reveals that dye molecules are trapped inside the silica particles. Photoluminescence investigations show that highly luminescent and photostable core-shell particles are formed. Such core-shell particles can be easily suspended in water and would be useful for a variety of applications. However, there is a blue shift in the photolumineseence wavelength in case of core-shell particles compared to bare dye powder sample. (c) 2004 Elsevier B.V. All rights reserved.

}, keywords = {core-shell, Luminescence, Nanoparticles, photoemission, RH06G dye, tetraethylorthosilicate (TEOS)}, issn = {0022-2313}, doi = {10.1016/j.jlumin.2004.11.005}, author = {Ethiraj, Anita S. and Hebalkar, Neha and Kharrazi, Sharmin and Urban, J. and Sainkar, S. R. and Kulkarni, S. K.} } @article { ISI:000231719800006, title = {Simple and practical approach to enantiomerically pure (S)-3-hydroxy-gamma-butyrolactone: synthesis of (R)-4-cyano-3-hydroxybutyric acid ethyl ester}, journal = {Tetrahedron-Symmetry}, volume = {16}, number = {16}, year = {2005}, month = {AUG}, pages = {2717-2721}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The oxidation of alpha- or beta-(1,4) linked disaccharides or oligosaccharides with cumene hydroperoxide in the presence of a base gave (S)-3,4-dihydroxybutyic acid, which was cyclized under acidic conditions to furnish (S)-3-hydroxy-gamma-butyrolactone. This was subsequently converted into (R)-cyano-3-hydroxybutyric acid ethyl ester, an intermediate for statin based drugs and other related compounds. (c) 2005 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2005.07.012}, author = {Kumar, P. and Deshmukh, A. N. and Upadhyay, R. K. and Gurjar, M. K.} } @article { ISI:000232886800008, title = {Synthesis and analysis of ZnO and CdSe nanoparticles}, journal = {Pramana-Journal of Physics}, volume = {65}, number = {4, SI}, year = {2005}, note = {1st National Conference on Nanoscience and Technology, Pune, INDIA, MAR 07-08, 2005}, month = {OCT}, pages = {615-620}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Zinc oxide and cadmium selenide particles in the nanometer size regime have been synthesized using chemical routes. The particles were capped using thioglycerol in case of ZnO and 2-mercaptoethanol in case of CdSe to achieve the stability and avoid the coalescence. Zinc oxide nanoparticles were doped with europium to study their optical properties. A variety of techniques like UV-Vis absorption spectroscopy, X-ray diffraction (XRD), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) were used to carry out structural and spectroscopic characterizations of the nanoparticles.

}, keywords = {chemical capping, Doping, Nanoparticles, photoluminescence}, issn = {0304-4289}, doi = {10.1007/BF03010449}, author = {Ashtaputre, S. S. and Deshpande, Aparna and Marathe, Sayali and Wankhede, M. E. and Chimanpure, J. and Pasricha, R. and Urban, J. and Haram, Santosh K. and Gosavi, S. W. and Kulkarni, S. K.} } @article { ISI:000229066500020, title = {Transesterification of diethyl oxalate with phenol using MoO3/SiO2 catalyst}, journal = {Applied Catalysis A-General}, volume = {285}, number = {1-2}, year = {2005}, month = {MAY}, pages = {190-195}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Transesterification of diethyl oxalate (DEO) with phenol to form diphenyl oxalate (DPO) has been carried out in liquid phase using MoO3/ SiO2 solid acid catalyst with high conversion and 100\% selectivity. A series Of MoO3/SiO2 catalysts with different Mo loadings (1-20 wt\%) were prepared using sol-gel technique and characterized using X-ray diffraction analysis (XRD), BET specific surface area, temperature-programmed desorption (TPD) of ammonia, and FTIR spectroscopic analysis of adsorbed pyridine. XRD analysis revealed the amorphous nature of the catalyst up to 10 wt\% MoO3 loading and the formation of crystalline α-MoO3 phase on amorphous silica support with higher MoO3 loading. BET surface area showed high surface area for catalysts prepared by sol-gel technique with lower MoO3 content; the surface area decreases with increasing MoO3 loading. Ammonia TPD shows much higher acid strength compared to the catalysts prepared by impregnation technique. Among the series of catalysts prepared, MoO3/SiO2 containing 1 wt\% MoO3 was found to be the most active catalyst for transesterification reaction, with a maximum DEO conversion of 80.9 and 100\% selectivity for DPO. The effects of reaction temperature and catalyst concentration on conversion and product selectivity have been investigated. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {diethyl oxalate, diphenyl oxalate, MoO3/SiO2, sol-gel technique, transesterification}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.02.028}, author = {Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000227346300059, title = {Unusual monodentate binding mode of 2,2 {\textquoteleft}-dipyridylamine (L) in isomeric trans(acac)(2)Ru-II(L)2, trans-[(acac)(2)Ru-III(L)(2)]ClO4, and cis-(acac)(2)Ru-II(L)(2) (acac = acetylacetonate). Synthesis, structures, and spectroscopic, electrochemical, and magn}, journal = {Inorganic Chemistry}, volume = {44}, number = {5}, year = {2005}, month = {MAR}, pages = {1571-1579}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{The reaction of cis-Ru(acac)(2)(CH3CN)(2) (acac = acetylacetonate) with 2,2{\textquoteright}-dipyridylamine (L) in ethanolic medium resulted in facile one-pot synthesis of stable [(acac)(2)Ru-III(L)]ClO4 ([1]ClO4), trans-[(acac)(2)Ru-II(L)2] (2), trans[(acac)(2)Ru-III(L)(2)[ClO4 ([2]ClO4), and cis-[(acac)(2)Ru-II(L)(2)] (3). The bivalent congener 1 was generated via electrochemical reduction Of [1]ClO4. Although in [1](+) the dipyridylamine ligand (L) is bonded to the metal ion in usual bidentate fashion, in 2/[2](+) and 3, the unusual monodentate binding mode of L has been preferentially stabilized. Moreover, in 2/[2](+) and 3, two such monodentate L{\textquoteright}s have been oriented in the trans- and cis-configurations, respectively. The binding mode of L and the isomeric geometries of the complexes were established by their single-crystal X-ray structures. The redox stability of the Ru(II) state follows the order 1 \< 2 much less than 3. In contrast to the magnetic moment obtained for [1]ClO4

}, issn = {0020-1669}, doi = {10.1021/ic049219v}, author = {Kar, S. and Chanda, N. and Mobin, Shaikh M. and Urbanos, F. A. and Niemeyer, M. and Puranik, Vedavati G. and Jimenez-Aparicio, Reyes and Lahiri, Goutam Kumar} } @article { ISI:000229488700008, title = {Vapor phase oxidation of 4-fluorotoluene over vanadia-titania catalyst}, journal = {Journal of Molecular Catalysis A - Chemical}, volume = {234}, number = {1-2}, year = {2005}, month = {JUN}, pages = {51-57}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The vapor phase oxidation of 4-fluorotoluene has been carried out over vanadia-titania catalysts with moderate conversion and selectivity for 4-fluorobenzaldehyde. Two series of V2O5/TiO2 catalysts with 1-10 mol\% vanadia were prepared by sol-gel technique using vanadium and titanium peroxide as vanadia and titania precursors respectively and by impregnation technique using vanadium peroxide on anatase titania support. The samples were characterized by X-ray diffraction, NH3-TPD, FT-IR and BET surface area measurements. The XRD of the catalysts prepared by impregnation technique showed retention of the anatase titania whereas the catalysts prepared by sol-gel technique showed the formation of rutile titania with minor amount of anatase phase at lower vanadia content (1-3 \%), which completely transformed into anatase phase at higher vanadia loading. The samples prepared by sol-gel method showed higher acidity and surface area compared to the samples prepared by impregnation. Pyridine adsorption study by FT-IR revealed the presence of Lewis acidity at lower vanadia loading (1-3 \%) and presence of both Lewis as well as Bronsted acidity at higher vanadia loading. The catalytic activity for oxidation of 4-fluorotoluene increased with vanadia loading in the sol-gel catalysts. The catalysts prepared by impregnation technique were found to be less active. However the selectivity for 4-fluorobenzaldehyde decreased with increase in vanadia content. The influence of vanadia loading, reaction temperature and contact time on the catalytic activity for 4-fluorotoluene oxidation has been investigated. The structure of the catalyst and its catalytic activity has been correlated. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Catalyst, fluorotoluene, Oxidation, vanadia-titania, vapor phase}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.02.020}, author = {Maurya, S. K. and Patil, P. and Shubhangi B. Umbarkar and Gurjar, M. K. and Dongare, Mohan K. and Rudiger, S. and Kemnitz, E.} } @article {43374, title = {Asymmetric dihydroxylation route towards the synthesis of (R)-clorprenaline hydrochloride}, journal = {Arkivoc}, year = {2006}, month = {JAN}, pages = {10-14}, abstract = {An efficient asymmetric synthesis of enantiomerically pure (R)-clorprenaline hydrochloride is described using Sharpless asymmetric dihydroxylation as the key step.}, author = {Pandey, Rajesh Kumar and Upadhyay, Rajesh Kumar and Kumar, Pradeep} } @article { ISI:000241506400143, title = {Intact cell MALDI mass spectrometry as a tool to screen drugs in vivo for regulation of protein expression}, journal = {Molecular \& Cellular Proteomics}, volume = {5}, number = {10, S}, year = {2006}, month = {OCT}, pages = {S62}, publisher = {AMER SOC BIOCHEMISTRY MOLECULAR BIOLOGY INC}, type = {Meeting Abstract}, address = {9650 ROCKVILLE PIKE, BETHESDA, MD 20814-3996 USA}, issn = {1535-9476}, author = {Kulkarni, Mahesh J. and Vinod, V. P. and Umashankar, P. K. and Patole, M. and Rao, M.} } @article { ISI:000237725100015, title = {Regioselective nitration of cumene to 4-nitro cumene using nitric acid over solid acid catalyst}, journal = {Catalysis Communications}, volume = {7}, number = {6}, year = {2006}, month = {JUN}, pages = {394-398}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The regioselective nitration of cumene to 4-nitro cumene (4-NC) has been carried out using 70\% nitric acid over MoO3/SiO2 solid acid catalyst with high conversion (62\%) and selectivity (68\%) for 4-NC. A series of MoO3/SiO2 catalysts with different MoO3 loadings (1-20 mol\%) were prepared by sol-gel technique and characterized using different characterization techniques. XRD analysis revealed the amorphous nature of the catalyst up to 10-mol\% MoO3 loading and formation of alpha-MoO3 crystalline phase on amorphous high surface area mesoporous silica support at higher MoO3 loading. Maximum conversion and selectivity has been obtained with slower addition of nitric acid and simultaneous azeotropic removal of water formed during the reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {cumene, nitration, ring nitration, side chain nitration, solid acid catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2005.12.022}, author = {Mathew, Sanyo M. and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000249553200007, title = {Bio-milling technique for the size reduction of chemically synthesized BiMnO3 nanoplates}, journal = {Journal of Materials Chemistry}, volume = {17}, number = {37}, year = {2007}, month = {AUG}, pages = {3910-3914}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Wet- chemical techniques for the synthesis of complex oxide materials have advanced significantly; however, achieving finely dispersed nanoparticles with sizes less than 10 nm still remains challenging, especially for the perovskite family of compounds. On the other hand, a fungusmediated synthesis technique has recently shown potential to synthesize perovskites such as BaTiO3 with sizes as small as 5 nm. Here we report, for the first time, the use of fungal biomass, at room temperature, to break down chemically synthesized BiMnO3 nanoplates ( size similar to 150 - 200 nm) into very small particles (, 10 nm) while maintaining their crystalline structure and the phase purity. This novel technique that we have named as {\textquoteleft}{\textquoteleft} bio- milling{\textquoteright}{\textquoteright} holds immense potential for synergically utilizing both chemical and biological synthesis techniques to synthesize complex oxide nanoparticles with particle sizes less than 10 nm with the proper crystalline phase.

}, issn = {0959-9428}, doi = {10.1039/b706154d}, author = {Mazumder, Baishakhi and Uddin, Imran and Khan, Shadab and Ravi, Venkat and Selvraj, Kaliaperumal and Poddar, Pankaj and Ahmad, Absar} } @article { ISI:000245141300021, title = {Controlled synthesis of low-molecular-weight polyethylene waxes by titanium-biphenolate-ethylaluminum sesquichloride based catalyst systems}, journal = {Journal of Applied Polymer Science}, volume = {104}, number = {3}, year = {2007}, month = {MAY}, pages = {1531-1539}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Soluble complexes of titanium(IV) bearing sterically hindered biphenols, such as biphenol, 1,1{\textquoteright}-methylene di-2-naphthol, 2,2{\textquoteright}-methylene bis(4-chlorophenol), 2,2{\textquoteright}-methylene bis(6-tert-butyl-4-ethyl phenol), and 2,2{\textquoteright} ethylidene bis(4,6-di-tert-butyl phenol), were prepared and characterized. These catalyst precursors, formulated as [Ti((OO)-O-boolean AND)X-2], were active in the polymerization of ethylene at high temperatures in combination with ethylaluminum sesquichloride as a cocatalyst. The ultra-low-molecular-weight polyethylenes (PEs) were linear and crystalline and displayed narrow polydispersities. The catalytic polymerization leading to PE waxes in this reaction exhibited unique properties that have potential applications in surface coatings and adhesive formulations. (c) 2007 Wiley Periodicals, Inc.

}, keywords = {Catalysts, polyethylene (PE), synthesis, Ziegler-Natta polymerization}, issn = {0021-8995}, doi = {10.1002/app.25525}, author = {Umare, Prashant S. and Rao, Karumanchi and Tembe, Gopal L. and Dhoble, Deepa Arun and Trivedi, Bhavna} } @article { ISI:000249567000022, title = {Highly photostable dye entrapped core-shell particles}, journal = {Materials Letters}, volume = {61}, number = {25}, year = {2007}, month = {OCT}, pages = {4738-4742}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Organic dye namely Coumarin 7 has been entrapped in silica particles using a single silica precursor viz. tetraethylorthosilicate. Both bare Coumarin 7 dye and dye incorporated core-shell particles were studied. Investigations of these core-shell composites were carried out using different characterization techniques such as energy dispersive X-ray analysis, X-ray photoelectron spectroscopy and transmission electron microscopy. It has been shown that the photostability of dye molecules is improved along with an increase in photoluminescence. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {core-shell, coumarin 7 dye, Luminescence, photostability, tetraethylorthosilicate}, issn = {0167-577X}, doi = {10.1016/j.matlet.2007.03.030}, author = {Ethiraj, Anita S. and Kharrazi, Sharmin and Hebalkar, Neha and Urban, J. and Sainkar, S. R. and Kulkarni, S. K.} } @article { ISI:000248918000008, title = {Oxidation of benzylic alcohols and sulfides over LaCoO3 and TBHP}, journal = {Arkivoc}, number = {1}, year = {2007}, month = {JAN}, pages = {70-75}, publisher = {ARKAT USA INC}, type = {Article}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

A simple and efficient methodology has been described for the selective oxidation of secondary benzylic alcohols to the corresponding ketones. In contrast, primary benzylic alcohols afforded dimethyl acetals.

}, keywords = {acetals, benzylic alcohols, Oxidation, perovskite LaCoO3}, issn = {1551-7004}, author = {Patil, Mahesh L. and Maujan, Suleman R. and Borate, Hanumant B. and Uphade, Balu S.} } @article {64}, title = {Polyethylene waxes: catalytic synthesis by ti-biphenolates}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {44}, number = {7-9}, year = {2007}, month = {JUL}, pages = {977-987}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

{Soluble complexes of Ti (IV) bearing biphenol groups such as 1,1{\textquoteright}-binaphthelene 2, 2{\textquoteright} diol (Binol), 1, 1{\textquoteright}-methylene di-2-naphthol, biphenol were prepared and characterized. These catalyst precursors formulated as [

}, keywords = {fibers, Nanoparticles, Self-assembly}, issn = {0021-9797}, author = {Umare, Prashant S. and Rao, Karumanchi and Tembe, Gopal L. and Dhoble, Deepa Arun and Trivedi, Bhavna} } @article { ISI:000243095400015, title = {Singlejet fluidized beds: experiments and CFD simulations with glass and polypropylene particles}, journal = {Chemical Engineering Science}, volume = {62}, number = {1-2}, year = {2007}, month = {JAN}, pages = {167-183}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Understanding hydrodynamics of bubbling fluidized beds is crucial in proper design and scale up of these beds. CFD models have shown promise in gaining this understanding. In order to generate confidence in CFD models, predicted time averaged and dynamical characteristics of the bubbling fluidized beds need to be validated against experimental data. This paper describes such studies with rectangular fluidized beds operated with a central jet. Digital image analysis and analysis of wall pressure fluctuations were used for this characterization. Fluidization of two types of particles, glass and polypropylene (PP) was studied at two different initial bed heights of H/D = 1 and 2 with three central jet velocities 5, 10 and 20 m/s. Time averaged as well as dynamical characteristics were studied. The Eulerian-Eulerian two fluid model based on kinetic theory of granular flows was used to simulate these experiments. The predicted results were compared with the experimental data and previously published correlations. Although, there is agreement with experimental data in some aspects, complete agreement was not found. The presented experimental data and comparison with CFD predictions will provide useful basis for further work on understanding bubbling fluidized beds. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {CFD, fluidized beds, hydrodynamics, image analysis, pressure fluctuations, single jet}, issn = {0009-2509}, doi = {10.1016/j.ces.2006.08.037}, author = {Utikar, Ranjeet P. and Ranade, Vivek V.} } @article { ISI:000250026200021, title = {Synthesis of tinidazole by condensation-oxidation sequence using MoO3/SiO2 bifunctional catalyst}, journal = {Catalysis Communications}, volume = {8}, number = {10}, year = {2007}, month = {OCT}, pages = {1550-1555}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Antimicrobial drug, tinidazole has been synthesized by condensation of 2-methyl,5-nitro-imidazole and 2-ethyl-thio-ethanol over MoO3/SiO2 catalyst to obtain 1-(2-ethyl-thio-ethanol)-2-methyl-5-nitro-imidazole which is further oxidized using hydrogen peroxide using the same MoO3/SiO2 catalyst to obtain tinidazole. MoO3/SiO2 catalyst (20\%), synthesized by sol-gel process showed the highest acid strength and was successfully demonstrated to catalyze both condensation and oxidation in the synthesis of tinidazole. Due to the bifunctional activity of the catalyst, the use of acetic acid for condensation step and tungstic acid or ammonium molybdate for oxidation step in the conventional synthesis of tinidazole could be eliminated, thus making it an environmentally benign process. The catalysts could be recycled five times without any appreciable loss in the conversion and selectivity showing the potential for. the use of MoO3/SiO2 as bifunctional catalyst for the production of this industrially important compound. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {antimicrobial drug, condensation, MoO3/SiO2, Oxidation, solid acid catalyst, tinidazole}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.01.001}, author = {Chandorkar, J. G. and Shubhangi B. Umbarkar and Rode, C. V. and Kotwal, V. B. and Dongare, Mohan K.} } @article { ISI:000254672800002, title = {Modeling of a fluidized bed propylene polymerization reactor operated in condensed mode}, journal = {Journal of Applied Polymer Science}, volume = {108}, number = {4}, year = {2008}, month = {MAY}, pages = {2067-2076}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

The gas-phase polymerization of propylene is one of the most widely accepted and commercially used processes for the manufacture of polypropylene (PP). Because of the highly exothermic nature of polymerization reactions, temperature runaway and subsequent polymer melting and agglomeration may occur, and the reactor has to be operated in a small operating window for safety. The addition of liquid monomer for heat removal (condensed mode) broadens the operating window and can substantially increase (by 50-100\%) the capacity of given reactor hardware. This article describes the extension of a comprehensive mathematical model for the simulation of fluidized bed PP reactors to include the condensed mode of operations. The model is used to determine the influence of the operating parameters on the polymer properties and particle size distribution. The model is also used to determine the effects of two active sites and the reaction kinetics on macroscopic variables. The developed framework is useful for simulating multimonomer, multisite Ziegler-Natta-type olefin fluidized bed polymerization reactors operated under condensed mode. (C) 2008 Wiley Periodicals, Inc. J Appl Polym Sci 108: 2067-2076, 2008.

}, keywords = {Modeling, Polyolefins, Ziegler-Natta polymerization}, issn = {0021-8995}, doi = {10.1002/app.27748}, author = {Utikar, Ranjeet P. and Harshe, Yogesh M. and Mehra, Anurag and Ranade, Vivek V.} } @article { ISI:000260944500007, title = {Nano-gold supported on Fe2O3: a highly active catalyst for low temperature oxidative destruction of methane green house gas from exhaust/waste gases}, journal = {Applied Catalysis A-General}, volume = {350}, number = {2}, year = {2008}, month = {NOV}, pages = {186-190}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A number of nano-gold catalysts were prepared by depositing gold on different metal oxides (viz. Fe2O3, Al2O3, Co3O4, MnO2, CeO2, MgO, Ga2O3 and TiO2), using the homogeneous deposition precipitation (HDP) technique. The catalysts were evaluated for their performance in the combustion of methane (1 mol\% in air) at different temperatures (300-600 degrees C) for a GHSV of 51,000 h(-1). The supported nano-gold catalysts have been characterized for their gold loading (by ICP) and gold particle size (by TEM/HRTEM or XRD peak broadening). Among these nano-gold catalysts, the Au/Fe2O3 (Au loading = 6.1\% and Au particle size = 8.5 nm) showed excellent performance. For this catalyst, temperature required for half the methane combustion was 387 degrees C, which is lower than that required for Pd(1\%)/Al2O3 (400 degrees C) and Pt(1\%)/Al2O3 (500 degrees C) under identical conditions. A detailed investigation on the influence of space velocity (GHSV = 10,000-100,000 cm(3) g(-1) h(-1)) at different temperatures (200-600 degrees C) on the oxidative destruction of methane over the Au/Fe2O3 catalyst has also been carried out. The Au/Fe2O3 catalyst prepared by the HDP method showed much higher methane combustion activity than that prepared by the conventional deposition precipitation (DP) method. The XPS analysis showed the presence of Au in the different oxidation states (Au-0, Au1+ and Au3+) in the catalyst. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Au/Fe2O3, Deposition precipitation, Homogeneous deposition precipitation, Methane combustion, Supported nano-gold catalysts}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.08.008}, author = {Choudhary, Vasant R. and Patil, V. P. and Jana, Prabhas and Uphade, B. S.} } @article { ISI:000256178900015, title = {Selective cis-dihydroxylation of olefins using recyclable homogeneous molybdenum acetylide catalyst}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {285}, number = {1-2}, year = {2008}, month = {APR}, pages = {111-119}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Selective cis-dihydroxylation of various olefins has been carried out using molybdenum acetylide complex CpMO(CO)(3)(C CPh) (1) as catalyst and hydrogen peroxide as an efficient and environmentally benign oxidant. In case of cyclohexene, very high conversion (95\%) and selectivity (86\%) for cis-dihydroxylated product has been achieved using H2O2 as an oxidant and t-butanol as a solvent. cis-Dihydroxylation of other substrates like styrene, a-methyl styrene, limonene and cyclopentene has also been carried out with very high selectivity for diol. The catalyst and intermediate species have been characterized using FT-IR, UV-vis spectral analysis and XPS studies as well as cyclic voltametric studies. These studies suggest that molybdenum oxo-peroxo complex is the catalytically active species. The intermediate blue complex when characterized by ESI MS suggested the formation of dimeric molybdenum complex and XPS and cyclic voltametric studies confirm the presence of mixed valence Mo(V) and Mo(VI) in the reaction intermediate. Based on the characterization results possible mechanism for dihydroxylation is proposed. Interestingly, even though the catalyst is homogeneous; it could be recovered quantitatively by extraction in aqueous phase and recycled five times without any appreciable loss in cyclohexene conversion and selectivity for cis-1,2-cyclohexanediol. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {acetylide complex, cis-dihydroxylation, Homogeneous catalysis, Hydrogen peroxide, recyclable}, issn = {1381-1169}, doi = {10.1016/j.molcata.2008.01.034}, author = {Biradar, Ankush V. and Sathe, Bhaskar R. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000256043100018, title = {Selective N-oxidation of aromatic amines to nitroso derivatives using a molybdenum acetylide oxo-peroxo complex as catalyst}, journal = {Tetrahedron Letters}, volume = {49}, number = {22}, year = {2008}, month = {MAY}, pages = {3616-3619}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The molybdenum acetylide oxo-peroxo complex obtained in situ by the treatment of the corresponding molybdenum acetylide carbonyl complex, CpMo(CO)(3)(C CPh); Cp = eta(5-)C(5)H(5) with H(2)O(2), has been used as an efficient catalyst for selective N-oxidation of primary amines to nitroso derivatives. Excellent amine conversion (up to 100\%) and very high selectivity for nitroso compounds (99\%) have been obtained using 30\% hydrogen peroxide as an oxidant. The oxo peroxo, Mo(VI) complex has also been found to be very active for the oxidation of various substituted primary aromatic amines with electron donating as well as electron withdrawing substituents on the aromatic ring. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {aromatic amine, Homogenous catalyst, Hydrogen peroxide, Molybdenum complex, nitroso, Oxidation, Oxo-peroxo}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.04.005}, author = {Biradar, Ankush V. and Kotbagi, Trupti V. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000260776800015, title = {Structure and microbial synthesis of sub-10 nm Bi2O3 nanocrystals}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {8}, number = {8}, year = {2008}, month = {AUG}, pages = {3909-3913}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

After the advent of novel chemical and microbial techniques, providing control over grain size and shape of the nanomaterials, several binary-oxide materials have been explored in size less than 10 nm for their tunable physical properties. Bi2O3 nanoparticles have also redrawn attention due to their excellent properties, mostly as optoelectronic material. Here, we report the room-temperature biosynthesis of Bi2O3 nanoparticles in a size range of 5-8 nm by extra-cellularly challenging the plant pathogenic fungus-Fusarium oxysporum with the bismuth nitrate as precursor. The as-synthesized particle-surfaces are inherently functionalized by a robust layer of proteins which provides them very good stability in the aqueous medium. Structural investigation using selected area electron diffraction, high resolution transmission electron microscopy and powder XRD shows that particles are almost perfectly single crystalline and primarily crystallize in alpha-phase with monoclinic structure.

}, keywords = {Biosynthesis, fungi, High Refractive Index, High Resolution TEM, Nanoparticles}, issn = {1533-4880}, doi = {10.1166/jnn.2008.179}, author = {Uddin, Imran and Adyanthaya, Suguna D. and Syed, Asad and Selvaraj, K. and Ahmad, Absar and Poddar, Pankaj} } @article { ISI:000261555200036, title = {Valence-state analysis through spectroelectrochemistry in a series of quinonoid-bridged diruthenium complexes [(acac)(2)Ru(mu-L)Ru(acac)(2)](n) (n =+2,+1, 0,-1,-2)}, journal = {Chemistry-A European Journal}, volume = {14}, number = {34}, year = {2008}, month = {OCT}, pages = {10816-10828}, publisher = {WILEY-BLACKWELL}, type = {Article}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

The quinonoid ligand-bridged diruthenium compounds [(acac)(2)Ru(mu-L2-)Ru(acac)(2)] (acac(-) = acetylacetonato = 2,4-pentanedionato; L2- = 2,5-dioxido-1,4-benzoquinone, 1; 3,6-dichloro-2,5-dioxido-1,4-benzoquinone, 2; 5,8-dioxido-1,4-naphthoquinone, 3; 2-3-dichloro-5,8-dioxido-1,4-naphthoquinone, 4; 1,5-dioxido-9,10-anthraquinone, 5; and 1,5-diimido-9,10-anthraquinone, 6) were prepared and characterized analytically. The crystal structure analysis of 5 in the rac configuration reveals two tris(2,4-pentanedionato)ruthenium moieties with an extended anthracenedione-derived bis(ketoenolatee) pi-conjugated bridging ligand. The weakly antiferro-magnetically coupled {Ru-III(mu-L2-)Ru{\textendash}(III)} configuration in 1-6 exhibits complicated overall magnetic and EPR responses,. ne simultaneous presence of highly redox-active quinonoid-bridging ligands and of two ruthenium centers capable of adopting the oxidation states +2, +3, and +4 creates a large variety of possible oxidation state combinations. Accordingly. the complexes 1-6 exhibit two reversible one-electron oxidation steps and at least two reversible reduction processes. Shifts to positive potentials were observed on introduction of Cl substituents (1 -\> 2, 3 -\> 4) or through replacement of NH by O (6 -\> 5). The ligand-to-metal charge transfer (LMCT) absorptions in the visible region of the neutral molecules become more intense and shifted to lower energies on stepwise reduction with two electrons. On oxidation, the para-substituted systems 1-4 exhibit monocation intermediates with intervalence charge transfer (IVCT) transitions of (RuRuIV)-Ru-III mixed-valent species. In contrast, the differently substituted systems 5 and 6 show no such near infrared (NIR) absorption. While the first reduction steps are thus assigned to largely ligand-centered processes, the oxidation appears to involve metal-ligand delocalized molecular orbitals with variable degrees of mixing.

}, keywords = {magnetic properties, quinones, ruthenium, spectroelectrochemistry, structure elucidation, valence-state distributions}, issn = {0947-6539}, doi = {10.1002/chem.200800976}, author = {Ghumaan, Sandeep and Sarkar, Biprajit and Maji, Somnath and Puranik, Vedavati G. and Fiedler, Jan and Urbanos, Francisco A. and Jimenez-Aparicio, Reyes and Kaim, Wolfgang and Lahiri, Goutam Kumar} } @article { ISI:000252678500008, title = {XPS and AFM investigations on silver-based photoimageable thick film systems}, journal = {Microelectronics International}, volume = {25}, number = {1}, year = {2008}, month = {JAN}, pages = {46-57}, publisher = {EMERALD GROUP PUBLISHING LIMITED}, type = {Article}, address = {HOWARD HOUSE, WAGON LANE, BINGLEY BD16 1WA, W YORKSHIRE, ENGLAND}, abstract = {

Purpose - The purpose of this paper is to ascertain chemical changes occurring at various stages involved in processing of silver-based photoimageable thick films; and to determine ensuing topographical features which other wise appeared to be hindered in 2D scanning electron microscopy. Design/methodology/approach - Surface sensitive techniques, viz. X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) were used. Findings - Interfacial adhesion of silver film with substrate (Al(2)O(3)) was specifically looked into with respect to role played by photoimaging (before and after exposure to ultra-violet light). XPS results revealed occurrence of subtle chemical changes in terms of unsaturation to saturation in C-C bonding and also an interesting C-Al bonding which presumably improves mechanical adhesion of unfired film with the alumina substrate. AFM was carried out to examine the surface roughness, particle size, and microstructure of film which are very important from the standpoint of high-frequency applications. Originality/value - Surface sensitive techniques like XPS and AFM were exclusively used in order to characterize silver-based photoimageable thick films.

}, keywords = {microscopy, Silver, thick film circuits, X-rays}, issn = {1356-5362}, doi = {10.1108/13565360810846653}, author = {Umarji, Govind and Ketkar, Supriya and Hawaldar, Ranjit R. and Gosavi, Suresh W. and Patil, Kashinath and Mulik, Uttam P. and Amalnerkar, Dinesh P.} } @article { ISI:000269426900019, title = {Acetalization of glycerol using mesoporous MoO3/SiO2 solid acid catalyst}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {310}, number = {1-2}, year = {2009}, month = {SEP}, pages = {150-158}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Acetalization of glycerol with various aldehydes has been carried out using mesoporous MoO3/SiO2 as a solid acid catalyst. A series of MoO3/SiO2 catalysts with varying MoO3 loadings(1-20 mol\%) were prepared by sol-gel technique using ethyl silicate-40 and ammonium heptamolybdate as silica and molybdenum source respectively. The sol-gel derived samples were calcined at 500 degrees C and characterized using various physicochemical characterization techniques. The XRD of the calcined samples showed the formation of amorphous phase up to 10 mol\% MoO3 loading and at higher loading of crystalline alpha-MoO3 on amorphous silica support. TEM analyses of the materials showed the uniform distribution of MoO3 nanoparticles on amorphous silica support. Raman spectroscopy showed the formation of silicomolybdic acid at low Mo loading and a mixture of alpha-MoO3 and polymolybdate species at high Mo loadings. Moreover the Raman spectra of intermediate loading samples also suggest the presence of beta-MoO3. Acetalization of glycerol with benzaldehyde was carried out using series of MoO3/SiO2 catalysts with varying MoO3 loadings (1-20 mol\%). Among the series, MoO3/SiO2 With 20 mol\% MoO3 loadings was found to be the most active catalyst in acetalization under mild conditions. Maximum conversion of benzaldehyde (72\%) was obtained in 8 h at 100 degrees C with 60\% selectivity for the six-membered acetal using 20\% MoO3/SiO2. Interestingly with substituted benzaldehydes under same reaction conditions the conversion of aldehydes decreased with increase in selectivity for six-membered acetals. These results indicate the potential of this catalyst for the acetalization of glycerol for an environmentally benign process. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Acetalization, Aldehyde, Glycerol, Silicomolybdic acid, solid acid}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.06.010}, author = {Shubhangi B. Umbarkar and Kotbagi, Trupti V. and Biradar, Ankush V. and Pasricha, Renu and Chanale, Jyoti and Dongare, Mohan K. and Mamede, Anne-Sophie and Lancelot, Christine and Payen, Edmond} } @article { ISI:000270362100043, title = {Carbon nanofiber with selectively decorated pt both on inner and outer walls as an efficient electrocatalyst for fuel cell applications}, journal = {Journal of Physical Chemistry C}, volume = {113}, number = {40}, year = {2009}, month = {OCT}, pages = {17572-17578}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A novel electrocatalyst, with excellent Pi dispersion oil the inner and outer wall of a carbon nanofiber (CNF) was prepared by a modified polyol process in which both surface tension and polarity characteristics of the medium were properly adjusted to favor solution entry into the tubular region by capillary filling and homogeneous wetting of the inner wall surface by the solvents. The pristine CNF, which possesses an inherently active inner wall surface and inactive outer Wall surface, led to selective Pt deposition along the inner wall, whereas activation of the outer wall with chemical functionalization resulted in excellent dispersion of Pt along both inner and outer walls. Structural and morphological characterizations using high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) revealed that when Pt could be dispersed along the inner as well as the Outer walls of CNF, the Pt particle size decreased to almost half as compared to the one With Pt decoration only along a single wall of the Substrate material. Further, electrochemical studies using cyclic voltammetry (CV) and rotating disk electrode (RDE) measurements revealed enhanced methanol oxidation and oxygen reduction properties, respectively. The electrochemical active area obtained for the catalyst with both inner and outer wall Pt decoration wits nearly two times higher than that corresponding to the one with only inner wall Pt decoration. Similarly, the rate constant for the oxygen reduction reaction displayed by this sample was four times higher in comparison with the sample prepared by Utilizing only one wall for Pt decoration.

}, issn = {1932-7447}, doi = {10.1021/jp9042655}, author = {Balan, Beena K. and Unni, SreeKuttan M. and Kurungot, Sreekumar} } @article { ISI:000271838100014, title = {C-H center dot center dot center dot N hydrogen bonds mediated solid state structures of 2,2 {\textquoteleft}-bis (4-pyridylsulfanylmethyl)-1,1 {\textquoteleft}-biphenyl and 9-(4-pyridylsulfanyl)phenanthrene}, journal = {Journal of Molecular Structure}, volume = {937}, number = {1-3}, year = {2009}, month = {NOV}, pages = {81-84}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Solid state structure elucidation of sulfanyl ligands, 2,2{\textquoteright}-bis(4-pyridylsulfany[methyl)-1,1{\textquoteright}-biphenyl, L(1) and 9-(4-pyridylsulfanyl)plienanthrene, L(2) are reported. In the structures L(1) and L(2), the molecules are self-assembled through C-H center dot center dot center dot N hydrogen bonds, yielding ensembles of cyclic and helical networks. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {hydrogen bonds, noncovalent interactions, Supramolecular assemblies}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2009.08.020}, author = {Upadhye, Ketaki and PrakashaReddy, J. and Pedireddi, V. R.} } @article { ISI:000265517700038, title = {Facile synthesis of 5,6-dihydro-5-hydroxy-2(1H)-pyridone}, journal = {Tetrahedron Letters}, volume = {50}, number = {20}, year = {2009}, month = {MAY}, pages = {2440-2442}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short synthesis of 5,6-dihydro-5-hydroxy-2(1H)-pyridone was achieved from L-serine employing Horner-Emmons olefination as the key step. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {alkaloids, Horner-Emmons olefination, L-serine, Pyridone, Z-selectivity}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.03.026}, author = {Upadhyay, Puspesh K. and Prasad, Rajendra and Pandey, Menaka and Kumar, Pradeep} } @article { ISI:000263218700025, title = {Novel synthesis of coumarins employing triphenyl(alpha-carboxymethylene)-phosphorane imidazolide as a C-2 synthon}, journal = {Tetrahedron Letters}, volume = {50}, number = {2}, year = {2009}, month = {JAN}, pages = {236-238}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A novel one-pot synthesis of coumarins via intramolecular Wittig cyclization from the reaction of phenolic compounds containing ortho-carbonyl group and triphenyl(alpha-carboxy methylene)phosphorane imidazolide is described. (c) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Carbonyldiimidazole, Coumarins, Intramolecular Wittig reaction, Phenolic compound, Phosphorane}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.10.133}, author = {Upadhyay, Puspesh K. and Kumar, Pradeep} } @article { ISI:000269883300021, title = {Recyclable amberlyst-70 as a catalyst for biginelli reaction: an efficient one-pot green protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones}, journal = {Catalysis Letters}, volume = {131}, number = {3-4}, year = {2009}, month = {SEP}, pages = {469-473}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones using Amberlyst-70 as a recyclable catalyst has been developed. The use of resinous, nontoxic, thermally stable and inexpensive Amberlyst-70, as a recyclable heterogeneous catalyst, makes the process simple with negligible chemical waste. Thus renders this method an environmentally acceptable synthetic tool for Biginelli reaction.

}, keywords = {Amberlyst-70, Biginelli reaction, green chemistry, heterogeneous catalysis}, issn = {1011-372X}, doi = {10.1007/s10562-009-9896-z}, author = {Chandak, Hemant S. and Lad, Nitin P. and Upare, Pravin P.} } @article { ISI:000266188300010, title = {Selective oxidation of aromatic primary alcohols to aldehydes using molybdenum acetylide oxo-peroxo complex as catalyst}, journal = {Tetrahedron Letters}, volume = {50}, number = {24}, year = {2009}, month = {JUN}, pages = {2885-2888}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Selective oxidation of various aromatic alcohols to aldehydes has been carried out with very high conversion (90\%) and selectivity (90\%) for aldehydes using cyclopentadienyl molybdenum acetylide complex, CpMo(CO)(3)(C CPh) (1) as catalyst and hydrogen peroxide as environmentally benign oxidant, Water-soluble Mo acetylide oxo-peroxo species is formed in situ after reaction of I with aqueous hydrogen peroxide during the Course of reaction as catalytically active species. Interestingly even though the catalyst is homogeneous it Could be recycled very easily by separating the products in organic phase and catalyst in aqueous phase using separating funnel. Even after five recycles no appreciable loss in alcohol conversion and aldehyde selectivity was observed. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Homogenous catalyst, Hydrogen peroxide, Molybdenum complex, Oxidation, Oxo-peroxo, Primary aromatic alcohol}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.03.178}, author = {Biradar, Ankush V. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000268042800012, title = {Support modification to improve the sulphur tolerance of Ag/Al2O3 for SCR of NOx with propene under lean-burn conditions}, journal = {Applied Catalysis B-Environmental}, volume = {90}, number = {3-4}, year = {2009}, month = {AUG}, pages = {416-425}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Ag/Al2O3 catalysts with 1 wt\% SiO2 or TiO2 doping in alumina support have been prepared by wet impregnation method and tested for sulphur tolerance during the selective catalytic reduction (SCR) of NOx using propene under lean conditions, Ag/Al2O3 showed 44\% NOx conversion at 623 K, which was drastically reduced to 21\% when exposed to 20 ppm SO2. When Al2O3 support in Ag/Al2O3 Was doped with 1 wt\% SiO2 or TiO2 the NOx conversion remained constant in presence of SO2 showing the improved sulphur tolerance of these catalysts. Subsequent water addition does not induce significant deactivation. On the contrary, a slight promotional effect on the activity of NO conversion to nitrogen is observed after Si and Ti incorporation. FTIR study showed the sulphation of silver and aluminum sites of Ag/Al2O3 catalysts resulting in the decrease in the formation of reactive intermediate species such as -NCO, which in turn decreases NOx conversion to N-2. In the case of Ag/Al2O3 doped with SiO2 or TiO2, formation of silver sulphate and aluminum sulphate was drastically reduced, which was evident in FTIR resulting in remarkable improvement in the sulphur tolerance of Ag/Al2O3 catalyst. These catalysts before and after the reaction have been characterized with various techniques (XRD, BET surface area, transmittance FTIR and pyridine adsorption) for physico-chemical properties. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Ag/Al2O3, Aluminum sulphate, DRIFTS, Selective catalytic reduction, Silver sulphate, SiO2, Sulphur tolerance, TiO2}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2009.04.001}, author = {Jagtap, Neelam and Shubhangi B. Umbarkar and Miquel, Pierre and Granger, Pascal and Dongare, Mohan K.} } @article { ISI:000267381100014, title = {Synthesis of catalytically active porous platinum nanoparticles by transmetallation reaction and proposition of the mechanism}, journal = {Small}, volume = {5}, number = {12}, year = {2009}, month = {JUN}, pages = {1467-1473}, publisher = {WILEY-V C H VERLAG GMBH}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

A facile method for the synthesis of porous platinum nanoparticles by transmetallation reactions between sacrificial nickel nanoparticles and chloroplatinic acid (H(2)PtCl(6)) in solution, as well as at the constrained environment of the air water interface, using a Langmuir-Blodgett instrumental setup is presented. To carry out the transmetallation at the air-water interface hydrophobized nickel nanoparticles are assembled as a monolayer on the sub phase containing platinum ions. The porous Pt nanoparticles obtained as a result of the reaction are found to act as extremely good catalysts for hydrogenation reaction. The products are well characterized by TEM, HRTEM, EDAX, and STEM. Attempts are made to postulate the plausible mechanism of this reaction to generate this kind of nanoparticle with controllable geometric shape and structure. This simple strategy has the potential to synthesize other nanomaterials of interest too.

}, keywords = {Catalysts, Interfaces, Nickel nanoparticles, porous platinum, Transmetallation}, issn = {1613-6810}, doi = {10.1002/smll.200801863}, author = {Pasricha, Renu and Bala, Tanushree and Biradar, Ankush V. and Shubhangi B. Umbarkar and Sastry, Murali} } @article { ISI:000282106400002, title = {Concise synthesis of (2S,3S,4S)-2-(Hydroxymethyl)pyrrolidine-3,4-diol (LAB1)}, journal = {Synthesis-Stuttgart}, number = {18}, year = {2010}, month = {SEP}, pages = {3063-3066}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The synthesis of (2S,3S,4S)-2-(hydroxymethyl)pyrrolidine-3,4-diol (LAB1) from Garner{\textquoteright}s aldehyde is described using the Sharpless asymmetric dihydroxylation as the key step.

}, keywords = {alkaloid, azasugars, diastereoselectivity, Garner{\textquoteright}s aldehyde, pyrrolidine, Wittig reaction}, issn = {0039-7881}, doi = {10.1055/s-0030-1258185}, author = {Upadhyay, Puspesh K. and Kumar, Pradeep} } @article { ISI:000276010000034, title = {Cytotoxic activity of 9,10-dihydro-2,5-dimethoxyphenanthrene-1,7-diol from Eulophia nuda against human cancer cells}, journal = {Journal of Ethnopharmacology}, volume = {128}, number = {1}, year = {2010}, month = {MAR}, pages = {251-253}, publisher = {ELSEVIER IRELAND LTD}, address = {ELSEVIER HOUSE, BROOKVALE PLAZA, EAST PARK SHANNON, CO, CLARE, 00000, IRELAND}, abstract = {

Ethnopharmacological relevance: Eulophia nuda L. (Orchidaceae) is a medicinally important terrestrial orchid used for the treatment of tumours and various health problems by the local healers throughout the Western Ghats region in Maharashtra (India). Aim of the study: To isolate the active molecule from Eulophia nuda and to study its cytotoxic potential against human cancer cells. Materials and methods: The crude methanolic extract of Eulophia nuda tubers was fractionated by stepwise gradient of the solvents chloroform-methanol to isolate the pure compound. Isolated pure compound was assessed for its cytotoxic potential against human breast cancer cell lines, MCF-7 and MDA-MB-231 using MTT assay. Structure elucidation of the isolated active compound was carried out by extensive spectroscopic analysis including (1)H NMR, (13)C NMR, NOESY, COSY, LC-MS and IR. Results: The isolated active molecule was identified as phenanthrene derivative 9,10-dihydro-2,5-dimethoxyphenanthrene-1,7-diol. This compound showed good antiproliferative activity against human breast cancer cell lines MCF-7 (91\%) and MDA-MB-231 (85\%) at 1000 mu g/ml concentration. Conclusion: 9,10-Dihydro-2,5-dimethoxyphenanthrene-1,7-diol from Eulophia nuda tubers showed good growth suppressive effect against human cancer cell lines MCF-7 and MDA-MB-231 making it a potential biomolecule against human cancer. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

}, keywords = {Cytotoxic activity, Eulophia nuda, Phenanthrene derivatives}, issn = {0378-8741}, doi = {10.1016/j.jep.2009.12.031}, author = {Shriram, Varsha and Kumar, Vinay and Kishor, P. B. Kavi and Suryawanshi, Sharad B. and Upadhyay, Ankur K. and Bhat, Manoj K.} } @conference { ISI:000287122200023, title = {Dynamic modeling of hydro- formylation of 1-decene on Rh/C catalyst in bubble colunm slurry reactor}, booktitle = {International Conference on Modeling, Optimization, and Computing}, series = {AIP Conference Proceedings}, volume = {1298}, year = {2010}, note = {International Conference on Modeling, Optimization, and Computing, Durgapur, INDIA, OCT 28-30, 2010}, month = {OCT}, pages = {143-150}, publisher = {Natl Inst Technol Durgapur; SERC, Dept Sci \& Technol; Caledonian Coll Engn; BRNS, Dept Atom Energy; DRDO, Minist Defence}, organization = {Natl Inst Technol Durgapur; SERC, Dept Sci \& Technol; Caledonian Coll Engn; BRNS, Dept Atom Energy; DRDO, Minist Defence}, address = {2 Huntington Quadrangle, STE 1NO1, Melville, NY 11747-4501 USA}, abstract = {

A dynamic model has been developed for the bubble column slurry reactor operating under non-isothermal conditions. The model consists of mass and heat balance equations for the gas and liquid phases and the catalyst particle. The model equations consisted of partial differential equations (PDE) which were converted to ordinary differential equations (ODE) by using finite difference relationships for the spatial derivatives and the ordinary differential equations for the time derivatives (Numerical Method of Lines-NMoL). The model was applied to describe the dynamic behaviour of bubble column slurry reactor during the hydroformylation of 1-decene on Rh/C catalyst. Model simulations were performed to obtain a meaningful path to steady state and to reproduce the other characteristics of the dynamic behaviour of the reactor. Under given conditions, the reaction required approximately 3750 seconds to reach the steady state concentrations at various reactor positions. It was observed with increase in the fluid velocities, the dynamics of the system was altered to 2500 seconds to reach the steady state condition. The effect of axial dispersion on the substrate concentration and the temperature rise along the reactor was further studied and discussed.

}, keywords = {axial dispersion, bubble column slurry reactor, Dynamic modeling, method of line, PDE solutions}, isbn = {978-0-7354-0854-8}, issn = {0094-243X}, doi = {10.1063/1.3516292}, author = {Upkare, Makarand M. and Rajurkar, Kalpendra B. and Das, Samir K. and Jaganathan, Rengaswamy}, editor = {Paruya, S. and Kar, S. and Roy, S.} } @article { ISI:000281129100046, title = {High pt utilization electrodes for polymer electrolyte membrane fuel cells by dispersing pt particles formed by a preprecipitation method on carbon {\textquoteleft}{\textquoteleft}polished{\textquoteright}{\textquoteright} with polypyrrole}, journal = {Journal of Physical Chemistry C}, volume = {114}, number = {34}, year = {2010}, month = {SEP}, pages = {14654-14661}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Pt utilization on carbon black (CB) has been significantly improved by initially utilizing polypyrrole (PPy) as a moiety to {\textquoteleft}{\textquoteleft}polish{\textquoteright}{\textquoteright} the carbon surface and subsequently by dispersing Pt particles formed by a preprecipitation process to minimize their migration into the geometrically restricted areas of the carbon surface. This process strategy has helped to significantly extend the triple-phase boundary as a greater number of Pt particles comes in direct contact with Nafion, leading to a substantial improvement in the overall catalyst utilization. Preliminary analyses such as IR, thermogravimetric analysis, and N(2) sorption confirmed the presence of PPy on the surface. Approximately 50\% reduction in the surface area of CB after the controlled in situ polymerization of pyrrole monomer on the carbon surface indicated preferential filling and coverage of pores and other geometrically restricted pockets of carbon surface. On the other hand, by converting Pt into colloids in the preprecipitation method prior to their reduction, the platinum particles are forced to stay on the hybrid support; a major part of which otherwise would have been migrated into the surface pores and defect sites. Platinum particle size on these hybrid supports is 2 times higher than the catalyst prepared by polyol process. However, the electroactive surface area and mass activity are 2 times higher than that of the Pt particles prepared by polyol on hybrid material and are also significantly higher than that of the conventional electrocatalysts prepared by the polyol method. At 0.8 V, the kinetic current density (j(k)) of Pt/C-PPy-Pre obtained from the Koutecky-Levich plot is 1.5 and 2.5 times higher than that of catalysts prepared by the polyol method on PPy-coated carbon and Vulcan XC-72 carbon, respectively. Almost 210 and 160 mW cm(-2) improvement for the maximum power density, respectively with oxygen and air, was obtained with the modified system in comparison to the conventional system when the single cell evaluations were carried out at 60 degrees C with a Pt loading of 0.5 mg cm(-2) in the anode and cathode sides. This enhancement in the cell performance under the two different oxygen partial pressure conditions clearly emphasizes the improved oxygen reduction reaction (ORR) and mass-transfer characteristics of the hybrid electrode material compared to the other catalysts.

}, issn = {1932-7447}, doi = {10.1021/jp104664t}, author = {Unni, SreeKuttan M. and Dhavale, Vishal M. and Pillai, Vijayamohanan K. and Kurungot, Sreekumar} } @article { ISI:000277404300005, title = {Interaction between ataxin-2 binding protein 1 and cubitus-interruptus during wing development in drosophila}, journal = {Developmental Biology}, volume = {341}, number = {2}, year = {2010}, month = {MAY}, pages = {389-399}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Animal growth and development is dependent on reiterative use of key signaling pathways such as Hedgehog (Hh) pathway. It is widely believed that Cubitus-interruptus (Ci) mediates all functions of Hh pathway. Here we report that CG32062, the Drosophila homologue of Ataxin-2 Binding Protein 1 (dA2BP1), functions as a cofactor of Ci to specify intervein region between L3 and L4 veins of the adult wing. Specifically, Ci-mediated transactivation of knot/collier (kn) in this region of the developing wing imaginal disc is dependent on dA2BP1 function. Protein interaction studies and chromatin-immunoprecipiation experiments suggest that Ci helps dA2BP1 to bind kn promoter, which in turn may help Ci to activate kn expression. These results suggest a mechanism by which Ci may activate targets such as kn, which do not have classical Ci/Gli-binding sites. (C) 2010 Elsevier Inc. All rights reserved.

}, keywords = {CG32062, Collier, Hedgehog, Knot, SCA2}, issn = {0012-1606}, doi = {10.1016/j.ydbio.2010.02.039}, author = {Usha, N. and Shashidhara, L. S.} } @conference { ISI:000287122200024, title = {Mathematical modeling and simulation of bubble column reactor for aerial liquid phase cyclohexane oxidation}, booktitle = {International Conference on Modeling, Optimization, and Computing}, series = {AIP Conference Proceedings}, volume = {1298}, year = {2010}, note = {International Conference on Modeling, Optimization, and Computing, Durgapur, INDIA, OCT 28-30, 2010}, month = {OCT}, pages = {151-159}, publisher = {Natl Inst Technol Durgapur; SERC, Dept Sci \& Technol; Caledonian Coll Engn; BRNS, Dept Atom Energy; DRDO, Minist Defence}, organization = {Natl Inst Technol Durgapur; SERC, Dept Sci \& Technol; Caledonian Coll Engn; BRNS, Dept Atom Energy; DRDO, Minist Defence}, address = {2 Huntington Quadrangle, STE 1no1, Melville, NY 11747-4501 USA}, abstract = {

Cyclohexane oxidation is an important but complex commercial reaction, wherein the desired product, K-A oil appears as an intermediates of the reaction sequence. A mathematical model has been developed for the bubble column reactor operating under isothermal conditions. The mass and energy model equations consisted of stiff ODEs. The model was applied to describe the behavior of bubble column reactor for aerial liquid phase cyclohexane oxidation. Effect of initial substrate concentration, catalyst loading and temperature was studied and discussed in detail. Conclusions were presented at the end of the study.

}, keywords = {K-A Oil Selectivity, Mathematical modeling, substrate conversion and product yield analysis}, isbn = {978-0-7354-0854-8}, issn = {0094-243X}, doi = {10.1063/1.3516293}, author = {Upkare, Makarand M. and Rajurkar, Kalpendra B. and Gupta, Pankaj R. and Jaganathan, Rengaswamy}, editor = {Paruya, S. and Kar, S. and Roy, S} } @article { ISI:000274375500003, title = {Molecular cloning, over expression, and activity studies of a peptidic HIV-1 protease inhibitor: designed synthetic gene to functional recombinant peptide}, journal = {Peptides}, volume = {31}, number = {1}, year = {2010}, month = {JAN}, pages = {16-21}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

The aspartic protease inhibitor (ATBI) purified from a Bacillus sp. is a potent inhibitor of several proteases including recombinant HIV-1 protease, pepsin, and fungal aspartic protease. In this study, we report the cloning, and over expression of a synthetic gene coding for ATBI in Escherichia coli and establish a purification Protocol. The ATBI molecule consists of eleven amino acids and is peptidic in nature. We used the peptide sequence data of ATBI to synthesize complementary oligonucleotides, which were annealed and subsequently cloned in-frame with the gene for glutathione-S-transferase (GST). The expression of the resulting fusion protein was induced in E. coli BL21-A1 cells using arabinose. The recombinant peptide was Purified using a reduced glutathione column, and cleaved with Factor Xa to remove the GST tag. The resultant product was further purified to homogeneity using RP-HPLC. Mass spectroscopy analysis revealed that the purified peptide had a molecular weight of 1186 Da which matches the theoretical molecular weight of the amino acids present in the synthetic gene. The recombinant peptide was found to be active in vitro against HIV-1 protease, pepsin, and fungal aspartic protease. The protocol described in this study may be used to clone pharmaceutically important peptide molecules. (C) 2009 Elsevier Inc. All rights reserved.

}, keywords = {Gateway cloning, HIV-1 protease, inhibitor, Proteases, Synthetic gene}, issn = {0196-9781}, doi = {10.1016/j.peptides.2009.09.034}, author = {Vathipadiekal, Vinod and Umasankar, Perunthottathu K. and Patole, Milind S. and Rao, Mala} } @article { ISI:000277529700013, title = {NO reduction under diesel exhaust conditions over Au/Al2O3 prepared by deposition-precipitation method}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {322}, number = {1-2}, year = {2010}, month = {MAY}, pages = {90-97}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Gold supported on alumina was prepared by urea deposition-precipitation method and compared to silver supported on alumina for the selective catalytic reduction of NO by hydrocarbons under lean conditions. The catalyst showed activity in the reduction of NO and 100\% selectivity towards N-2 in the temperature range 300-350 degrees C. At higher temperature the NO conversion decreased due to competitive oxidative reactions of the reductants. XPS analysis confirmed the good stability of gold nanoparticles deposited on alumina. Infrared studies showed the formation of various adsorbed species (formates, carboxylates, ad-NOx and cyanide) on the catalyst surface. Addition of H-2 to the feed containing decane enhanced the formation of these species on the catalyst surface as well as the catalytic activity for the NO conversion to N-2. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Deposition-precipitation, Gold, In situ IR, NO reduction, XPS}, issn = {1381-1169}, doi = {10.1016/j.molcata.2010.02.024}, author = {Miguel, P. and Granger, P. and Jagtap, Neelam and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dujardin, Christophe} } @article { ISI:000274885600046, title = {Pivaloyl chloride/DMF: a new reagent for conversion of alcohols to chlorides}, journal = {Tetrahedron Letters}, volume = {51}, number = {4}, year = {2010}, month = {JAN}, pages = {744-746}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient procedure for conversion of alcohols into the corresponding chlorides is described. Pivaloyl chloride/DMF complex is employed as a mild and inexpensive reagent. A possible reaction mechanism is proposed. (C) 2009 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.11.131}, author = {Dubey, Abhishek and Upadhyay, Arun K. and Kumar, Pradeep} } @article { ISI:000274292700015, title = {Polymer-supported palladium-imidazole complex catalyst for hydrogenation of substituted benzylideneanilines}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {317}, number = {1-2}, year = {2010}, month = {FEB}, pages = {111-117}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The polymer-supported palladium-imidazole complex catalyst was synthesized and characterized by various techniques Such as elemental analysis, IR spectroscopy and TG analysis. The physico-chemical properties such as bulk density, Surface studies by BET method and swelling studies of catalyst in different solvents were investigated. XPS Studies were carried out to identify the oxidation state of palladium in the catalyst. The morphology of the support and the catalyst was studied using scanning electron microscope. Using the synthesized catalyst, hydrogenation of benzylideneaniline and a few of its para Substituted derivatives was carried out at ambient conditions. The influence of variation in temperature, concentration of the catalyst as well as the substrate on the rate of reaction Was Studied. The catalyst showed an excellent recycling efficiency over six cycles without leaching of metal from the polymer support. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Benzylideneaniline, Hydrogenation, kinetics, Polymer-supported palladium-imidazole complex catalyst}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.10.030}, author = {Udayakumar, V. and Alexander, S. and Gayathri, V. and Shivakumaraiah and Patil, K. R. and Viswanathan, B.} } @article { ISI:000275985700041, title = {Pt-MoOx-carbon nanotube redox couple based electrocatalyst as a potential partner with polybenzimidazole membrane for high temperature polymer electrolyte membrane fuel cell applications}, journal = {Electrochimica Acta}, volume = {55}, number = {8}, year = {2010}, month = {MAR}, pages = {2878-2887}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A redox couple based electrocatalyst comprising of Pt-Multi Wall Carbon NanoTube (Pt-MWCNT) promoted with molybdenum oxide (MoOx, 2 \< x \< 3) nanoparticles was prepared. The objective was to effectively organize the Pt-MoOx interface on the smooth MWCNT surface to overcome the practical difficulties associated with establishing such interface with Pt dispersed on carbon morphologies possessing surface irregularities. The present study revealed the importance of stringent controlling of the additive level for maintaining a balanced bifunctional behavior of the catalyst combination through the synergistic effects by the components and the need of a proton conducting membrane operable at high temperature to get better output from the Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems. An indigenously developed polybenzimidazole (PBI) membrane was used to fabricate a membrane electrode assembly (MEA) as it can be operated at higher temperatures compared to that of Nafion membranes. MoOx additive level was carefully controlled by monitoring the active Pt area by cyclic voltammetry. All prepared electrocatalysts were characterized by using HRTEM, XRD and XPS to get information on dispersion and morphology, crystalinity and oxidation state of different elements, respectively. The system prepared with 5\% MoOx addition with respect to Pt (hereafter Pt-MoOx(5\%)-MWCNT) displayed balanced active Pt area and excellent oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) activities. Rotating Disk Electrode (ROE) system was extensively utilized to understand the ORR kinetics and the favorable role of MoOx as the promoter in the reaction. The kinetic current (j(k)) measured at 0.02 V vs. Hg/Hg2SO4 electrode from the Koutecky-Levich plots was 9 times higher and the apparent activation energy during single cell evaluation was 27 kJ/mol lower for the MoOx promoted system, compared to the system without the additive. A higher operating temperature significantly favored the cell performance by a combined effect of enhancement in proton conductivity of the PBI membrane and possible kinetic benefit by the well postulated oxygen spill over effect by the MoOx type systems in some combinations involving such systems. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Methanol oxidation reaction, MWCNT, oxygen reduction reaction, PBI membrane, PEMFC}, issn = {0013-4686}, doi = {10.1016/j.electacta.2010.01.012}, author = {Vellacheri, Ranjith and Unni, SreeKuttan M. and Nahire, Sandip and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article { ISI:000281783500005, title = {Short and efficient synthesis of (S)-(+)-2-(Hydroxymethyl)-6-piperidin-2-one}, journal = {Synthesis-Stuttgart}, number = {15}, year = {2010}, month = {AUG}, pages = {2512-2514}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A concise synthesis of (S)-(+)-2-(hydroxymethyl)-6-piperidin-2-one is described that employs L-aspartic acid as chiral pool starting material and Wittig reaction as the key step.

}, keywords = {Amino acid, Hydrogenation, L-aspartic acid, pipecolate, piperidone, Wittig reaction}, issn = {0039-7881}, doi = {10.1055/s-0029-1218823}, author = {Upadhyay, Puspesh K. and Kumar, Pradeep} } @article { ISI:000274869900014, title = {Vanadia-titania thin films for photocatalytic degradation of formaldehyde in sunlight}, journal = {Applied Catalysis A-General}, volume = {374}, number = {1-2}, year = {2010}, month = {FEB}, pages = {103-109}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Thin films of vanadia-titania with good adhesion to the substrates have been deposited on various substrates such as glass slides, glass helix and silica raschig rings by simple sol-gel dip coating process using vanadium and titanium peroxide gel. The optimum concentration of vanadia in titania for obtaining good uniform viscous gel was found to be 0.5-4 wt\% beyond which the vanadia particles disturb the gel network, resulting in the formation of a gelatinous precipitate. The films of vanadia-titania as well as the dried powder of the bulk gel were characterized by different characterization techniques. Optical characterization by UV-vis spectrophotometer showed a shift in optical absorption wavelength to the visible region that may be due to the incorporation of vanadia into titania structure. The XRD revealed the formation of anatase phase in pure titania as well as titania with up to 2\% vanadia loading, whereas formation of rutile as minor phase along with anatase as major phase was observed at higher vanadia loading. The XRD did not show any peaks of vanadia phase up to 5\% vanadia loading indicating either incorporation of vanadia into titania structure or high dispersion of amorphous vanadia on titania support. The pure and vanadia doped TiO(2) thin films were evaluated for their photocatalytic activity for degradation of methylene blue as a model pollutant under sunlight. Doping Of V(2)O(5) in TiO(2) showed an increase in the photo-degradation rate of methylene blue by a factor of 3-6.6 times compared to pure TiO(2). The highest rate has been obtained for 4\% V(2)O(5)-doped TiO(2) films. Vanadia doped TiO(2) thin films were also found to be very active for photocatalytic degradation of formaldehyde from aqueous solution in sunlight. (c) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Formaldehyde, Methylene blue, Photocatalysis, Sunlight, Thin films, V(2)O(5)/TiO(2)}, issn = {0926-860X}, doi = {10.1016/j.apcata.2009.11.035}, author = {Akbarzadeh, Rokhsareh and Shubhangi B. Umbarkar and Sonawane, Ravindra S. and Takle, Srikant and Dongare, Mohan K.} } @article { ISI:000295113200015, title = {Asymmetric dihydroxylation route to (-)-bulgecinine}, journal = {Tetrahedron-Asymmetry}, volume = {22}, number = {11}, year = {2011}, month = {JUN}, pages = {1234-1238}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The stereoselective synthesis of (-)-bulgecinine is reported from L-aspartic acid using Sharpless asymmetric dihydroxylation and intramolecular cyclization via nucleophilic displacement of alpha-tosylate as key steps. (C) 2011 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2011.06.018}, author = {Show, Krishanu and Upadhyay, Puspesh K. and Kumar, Pradeep} } @article { ISI:000288386600076, title = {Ex-situ dispersion of core-shell nanoparticles of Cu-Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities}, journal = {Chemical Communications}, volume = {47}, number = {13}, year = {2011}, month = {FEB}, pages = {3951-3953}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Direct dispersion of core-shell nanoparticles on a carbon support (Cu@ Pt/C) has been achieved while retaining the essential core-shell features of the nanoparticles by adopting an in situ surface modification-cum-anchoring strategy.

}, issn = {1359-7345}, doi = {10.1039/c0cc05645f}, author = {Dhavale, Vishal M. and Unni, SreeKuttan M. and Kagalwala, Husain N. and Pillai, Vijayamohanan K. and Kurungot, Sreekumar} } @article { ISI:000286902200016, title = {One-pot synthesis of 2,4,5-trisubstituted imidazoles using MoO3/SiO2, an efficient and recyclable catalyst}, journal = {Synthetic Communications}, volume = {41}, number = {5}, year = {2011}, month = {JAN}, pages = {PII 932996516}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

[image omitted] A simple one-pot synthesis has been developed for the synthesis of 2,4,5-trisubstituted imidazoles using an efficient and recyclable MoO3/SiO2 solid acid catalyst by condensation of benzil or benzoin, benzaldehyde, and ammonium acetate in acetonitrile as a solvent. Using this solid catalyst, the reactions could be carried out under mild reaction conditions with very good yield of imidazoles, up to 95\%. This catalyst could be recycled very easily, which makes this methodology environmentally benign.

}, keywords = {benzil, benzoin, cyclocondensation, imidazoles, MoO3, One-pot, SiO2, solid acid}, issn = {0039-7911}, doi = {10.1080/00397911003644415}, author = {Bhosale, Sidhanath V. and Kalyankar, Mohan B. and Nalage, Santosh V. and Bhosale, Dattatry S. and Pandhare, Swati L. and Kotbagi, Trupti V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000311056800010, title = {3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor}, journal = {Chemsuschem}, volume = {5}, number = {11}, year = {2012}, month = {OCT}, pages = {2159-2164}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, keywords = {Electrochemistry, Energy storage, graphene, porous materials, Supercapacitors}, issn = {1864-5631}, doi = {10.1002/cssc.201200421}, author = {Yadav, Prasad and Banerjee, Abhik and Unni, Sreekuttan and Jog, Jyoti Prakash and Kurungot, Sreekumar and Ogale, Satishchandra} } @article { ISI:000313235300008, title = {4(R/S)-Amino/guanidino-substituted proline peptides: design, synthesis and DNA transfection properties}, journal = {Chimia}, volume = {66}, number = {12, 1}, year = {2012}, month = {DEC}, pages = {936-940}, publisher = {SWISS CHEMICAL SOC}, address = {SCHWARZTORSTRASSE 9, CH-3007 BERN, SWITZERLAND}, abstract = {

Collagen is a major structural protein found in the connective tissues of higher organisms and mammals and its biomechanical properties are related to the high thermal stability of its triple helical structure. The primary structure of collagen is composed of the repeating tripeptide motif of Pro-Hyp-Gly, where Hyp is 4R-hydroxy proline. Cationic collagen mimetics consisting of [Pro(X)-Pro(Y)-Gly](6) where Pro(X) and Pro(Y) are 4(R/S)-amino/guanidine proline have been synthesized and shown to form triplexes more stable than the unmodified collagen peptide [Pro-Hyp-Gly](6). The origin of hyperstability is due to conformational pre-organization of proline pucker arising from the electronegativity of the cationic group. These cationic collagen peptides are shown to be effective cell penetrating and plasmid DNA transfecting agents. The results have potential for design of new collagen mimetics for biomaterial applications and efficient cell penetrating agents for drug delivery applications.

}, keywords = {4-Aminoproline peptides, 4-Guanidino proline peptides, Cationic collagen mimetics, Cell penetrating peptides}, issn = {0009-4293}, doi = {10.2533/chimia.2012.936}, author = {Umashankara, M. and Nanda, Manaswini and Sonar, Mahesh and Ganesh, Krishna N.} } @article { ISI:000306503200003, title = {Activity modulated low platium content oxygen reduction electrocatalysts prepared by inducing nano-order dislocations on carbon nanofiber through N-2-doping}, journal = {Journal of Physical Chemistry C}, volume = {116}, number = {28}, year = {2012}, month = {JUL}, pages = {14754-14763}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We demonstrate how surface unsaturation developed during small order buckling of graphene interlayer upon doping iron nitride (i.e., FeNx) moieties in carbon nanofiber can be utilized as a very efficient mode of surface activation to establish fine distribution of Pt nanoparticles with 10 wt \%. The surface dislocations have been effectively modulating the oxygen reduction characteristics of Pt through synergistic effects of the interacting species. The simultaneous enhancement of dispersion of Pt and oxygen reduction reaction (ORR) activity with a low weight percentage of dispersed Pt has been attained by FeNx doping, which increases the density of the active sites owing to the formation of fine and abundant delaminated regions on the CNF surface. HR-TEM images clearly depict the fine distribution of Pt nanoparticles on the delaminated regions of FeNxCNF. The stable incorporation of Pt on nitrogen doped active sites has been further confirmed by observing the formation of Pt-N peak at 391.5 eV using XPS analysis. The fine distribution of Pt nanoparticles along the abundant nanopockets between the buckled graphene layers helped the system to attain significantly high electrochemically active surface area of Pt as evident from the cyclic voltammetric studies. The mass activity of PtFeNxCNF at 0.9 V vs RHE is 4.9 mA mgPt(-1) which is two times higher than that of E-TEK. The superior catalytic activity (exchange current density (i(0)) at 0.8 V is 2.61X 10(-6)) could be further confirmed by single cell evaluation of the membrane electrode assembly (MEA) of polymer electrolyte fuel cell (PEFC), where the cathode electrode was fabricated from this new catalyst.

}, issn = {1932-7447}, doi = {10.1021/jp300881p}, author = {Palaniselvam, Thangavelu and Irshad, Ahamed and Unni, Bipinlal and Kurungot, Sreekumar} } @article { ISI:000309208000024, title = {Ammonia clathrate hydrates as new solid phases for Titan, Enceladus, and other planetary systems}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {109}, number = {37}, year = {2012}, month = {SEP}, pages = {14785-14790}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

There is interest in the role of ammonia on Saturn{\textquoteright}s moons Titan and Enceladus as the presence of water, methane, and ammonia under temperature and pressure conditions of the surface and interior make these moons rich environments for the study of phases formed by these materials. Ammonia is known to form solid hemi-, mono-, and dihydrate crystal phases under conditions consistent with the surface of Titan and Enceladus, but has also been assigned a role as water-ice antifreeze and methane hydrate inhibitor which is thought to contribute to the outgassing of methane clathrate hydrates into these moons{\textquoteright} atmospheres. Here we show, through direct synthesis from solution and vapor deposition experiments under conditions consistent with extraterrestrial planetary atmospheres, that ammonia forms clathrate hydrates and participates synergistically in clathrate hydrate formation in the presence of methane gas at low temperatures. The binary structure II tetrahydrofuran + ammonia, structure I ammonia, and binary structure I ammonia + methane clathrate hydrate phases synthesized have been characterized by X-ray diffraction, molecular dynamics simulation, and Raman spectroscopy methods.

}, keywords = {ethane, hydrate inhibitors, hydrogen bonding, ice, single crystal X-ray diffraction}, issn = {0027-8424}, doi = {10.1073/pnas.1205820109}, author = {Shin, Kyuchul and Kumar, Rajnish and Udachin, Konstantin A. and Alavi, Saman and Ripmeester, John A.} } @article { ISI:000303698100011, title = {Calcined, rare earth modified hydrotalcite as a solid, reusable catalyst for dimethyl carbonate synthesis}, journal = {Industrial \& Engineering Chemistry Research}, volume = {51}, number = {18}, year = {2012}, month = {MAY}, pages = {6356-6363}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An eco-friendly building block and fuel additive dimethyl-carbonate (DMC)-was synthesized through a benign route by transesterification of propylene carbonate (PC) with methanol. The catalytic activity of a series of calcined, rare earth elements (La3+, Ce3+, Pr3+, Sm3+, and Y3+; 2-10 mol \%) incorporated Mg-Al hydrotalcites (HT) was evaluated for this reaction. Among several, the La (8 mol \%) modified HT showed the highest activity (PC conversion = 65.4 mol \% and DMC selectivity = 88 mol \% at 150 degrees C and in 2 h). Basicity of the catalyst played an important role on the transesterification activity. The influence of reaction parameters and calcination temperature on the catalytic activity of HT was investigated. The La modified HT catalyst was heterogeneous and could be reused with little loss of activity.

}, issn = {0888-5885}, doi = {10.1021/ie300678p}, author = {Unnikrishnan, P. and Srinivas, D.} } @article { ISI:000308285100046, title = {Deposition-precipitation versus anionic-exchange Au/Al2O3 catalysts: a comparative investigation towards the selective reduction of NOx}, journal = {Catalysis Communications}, volume = {26}, year = {2012}, month = {SEP}, pages = {225-230}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Catalytic properties of supported gold catalysts on gamma-Al2O3 prepared by a conventional deposition-precipitation method were compared with those obtained by anionic-exchange for the reduction of NOx by hydrocarbon under lean conditions that simulate Diesel engine exhaust gas. Interestingly, a catalytic activity enhancement is observed after thermal ageing under reactive conditions at 500 degrees C on anionic-exchanged samples which make them suitable for practical developments. On the other hand, the reverse trend is observed on the solids prepared by deposition-precipitation which deactivate at low temperature. Such changes in catalytic properties have been tentatively explained on the basis of textural and structural modifications taking place during thermal ageing under wet atmosphere. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Anionic-exchange, Au catalyst, Deposition-precipitation, NOx abatement, Selective catalytic reduction}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.06.004}, author = {Nguyen, D. L. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Lancelot, Christine and Girardon, J. S. and Dujardin, Christophe and Granger, P.} } @article { ISI:000306674200026, title = {Disordered brownmillerite Ba2InCeO5+delta with enhanced oxygen reduction activity}, journal = {Chemistry of Materials}, volume = {24}, number = {14}, year = {2012}, month = {JUL}, pages = {2823-2828}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A disordered brownmillerite, Ba2InCeO5+delta, with slight tetragonal distortion from ideal cubic perovskite is synthesized and its oxygen reduction reactivity tested. The material displayed oxygen reduction behavior in alkaline solution comparable to that of standard 40 wt \% Pt/C catalyst and attractive activity characteristics which renders it a potential system for low temperature fuel cell applications.

}, keywords = {brownmillerite, fuel cell, oxygen reduction reaction, Rietveld refinement}, issn = {0897-4756}, doi = {10.1021/cm301863x}, author = {Jijil, Chamundi P. and Unni, SreeKuttan M. and Sreekumar, Kurungot and Devi, R. Nandini} } @article { ISI:000309644400011, title = {Enhanced photocatalytic activity of multi-doped TiO2 for the degradation of methyl orange}, journal = {Applied Catalysis A-General}, volume = {443}, year = {2012}, month = {NOV}, pages = {96-102}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We report the synergistic effect of dopants like Gd, N and Sin enhancing the photocatalytic activity of TiO2. Nanosized TiO2 doped at both cationic and anionic sites by Gd, N and S exhibited increased photocatalytic activity compared to TiO2 doped with either Gd or N and S. All the doped TiO2 existed as anatase phase and no separate phase due to Gd2O3 was seen up to a Gd concentration of 2\%. The particle size as seen from the transmission electron micrograph was similar to 25 nm. The optical absorption property of TiO2 was improved by doping and redshift of the absorption edge is seen for all doped samples compared to pristine TiO2. The red shift of the absorption edge was the highest for the multiple ion-doped sample. Presence of bonded N and S in TiO2 was detected by X-ray photoelectron spectroscopy. Fluorescence lifetime studies indicated an enhanced lifetime for the charge carriers in the doped system compared to pristine TiO2. Photocatalytic activity study showed that the multi-doped sample has the highest activity for the degradation of methyl orange compared to Gd-TiO2, NS-TiO2 and pristine TiO2. The enhanced photocatalytic activity of the multi-doped TiO2 is attributed to factors such as improved optical absorption property and improved lifetime of the charge carriers. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Fluorescence lifetime, Gd N S doped TiO2, Methyl orange, Photocatalyst, Photodegradation}, issn = {0926-860X}, doi = {10.1016/j.apcata.2012.07.032}, author = {Charanpahari, A. and Umare, S. S. and Gokhale, S. P. and Sudarsan, V. and Sreedhar, B. and Sasikala, R.} } @article { ISI:000301936700004, title = {Environmentally benign synthesis of beta-hydroxy sulfides using cyclic carbonates catalyzed by large-pore zeolites}, journal = {Green Chemistry Letters and Reviews}, volume = {5}, number = {1}, year = {2012}, month = {AUG}, pages = {19-26}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

An efficient one-pot synthesis of beta-hydroxy sulfides from thiophenol and cyclic carbonates catalyzed by large-pore zeolites has been reported. Reaction of thiophenol with ethylene carbonate in the presence of the Na-X zeolite catalyst gave the highest yield of 2-(phenylthio)ethanol (100\%), while reaction with propylene carbonate a highest yield of regioselective product 1-(phenylthio)propan-2-ol was obtained (97\%). Enantiomerically pure 1,2-propylene carbonate gave highly regioselective and stereospecific phenylthiopropanol, demonstrating that original chirality of propylene carbonate is retained. A plausible mechanism has been proposed for zeolite-catalyzed transformation involving a chemoselective nucleophilic attack of thiophenoloxide ion onto the less-substituted carbon of cyclic carbonate. The Na-X zeolite catalyst is recyclable and provides advantages of green chemistry approach to the synthesis of beta-hydroxy sulfides without the use of any solvent.

}, keywords = {beta-hydroxy sulfide, ethylene carbonate, propylene carbonate, thiophenol, zeolite}, issn = {1751-8253}, doi = {10.1080/17518253.2011.574295}, author = {Upare, Pravin P. and Kinage, Anil K. and Shingote, Savita K. and Gupte, Sunil P.} } @article { ISI:000310934400028, title = {Graphene enriched with pyrrolic coordination of the doped nitrogen as an efficient metal-free electrocatalyst for oxygen reduction}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {44}, year = {2012}, month = {NOV}, pages = {23506-23513}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report an efficient template-free synthetic route for the preparation of mesoporous nitrogen-doped graphene (NGE) containing a high weight percentage of pyrrolic nitrogen, good specific surface area and comparable electrochemical oxygen reduction activity as that of the state-of-the-art 40 wt\% Pt/C catalyst. The desired coordination of nitrogen in the carbon framework of graphene has been conceived by a mutually assisted redox reaction between graphene oxide (GO) and pyrrole, followed by thermal treatment at elevated temperatures. NGE exhibits a high surface area of 528 m(2) g(-1) and a pore diameter of similar to 3 to 7 nm. The heat treatment temperature plays a pivotal role in establishing the desired pyrrolic coordination of nitrogen in graphene for the electrochemical oxygen reduction reaction. The NGE sample obtained after heat treatment at 1000 degrees C (NGE-1000) has 53\% pyrrolic nitrogen content compared to the similar samples prepared by treating at low temperatures. Most importantly, NGE-1000 has displayed a significantly low overpotential for oxygen reduction with the onset potential very closely matching that of the commercial 40 wt\% Pt/C. It is noteworthy that the reaction involves the desired 4 electron transfer as observed in the case of the Pt based electrocatalysts, leading to a significantly high kinetic current density of 6 mA cm(-2) at -0.2 V. Moreover, the fuel tolerance and durability under the electrochemical environment of the NGE catalyst is found to be superior to the Pt/C catalyst.

}, issn = {0959-9428}, doi = {10.1039/c2jm35547g}, author = {Unni, SreeKuttan M. and Devulapally, Saikrishna and Karjule, Neeta and Kurungot, Sreekumar} } @article { ISI:000311698800036, title = {One-pot sol-gel preparation for efficient cobalt-molybdenum-titania hydrotreating catalysts}, journal = {Chemcatchem}, volume = {4}, number = {12}, year = {2012}, month = {DEC}, pages = {2112-2120}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Titania-based hydrodesulfurization catalysts were prepared by using a one-pot solgel method with the titanium peroxo complex as titanium precursor and molybdenum and cobalt precursors dissolved in the aqueous hydrogen peroxide solution used during synthesis. Catalysts with MoO3 loadings varying from 5 to 40 wt?\% and a Co/Mo atomic ratio of 0.5 were prepared. Solids with molybdenum loadings below 20 wt?\% MoO3 demonstrated poor hydrodesulfurization activity for the model compound thiophene. This was attributed to the presence of a large amount of embedded cobalt and molybdenum species in the titania matrix. A significant increase in the catalytic activity was observed for solids containing 20 and 25 wt?\% of MoO3 on which active species appeared to be accessible on the titania surface. Furthermore, the highest conversion obtained on these solgel solids was superior to the highest conversion obtained on reference catalysts prepared through the impregnation of ammonium heptamolybdate and cobalt nitrate on commercial titania.

}, keywords = {cobalt, heterogeneous catalysis, Molybdenum, sol-gel process, titanium}, issn = {1867-3880}, doi = {10.1002/cctc.201200165}, author = {Nguyen, D. L. and Gillot, S. and Souza, D. O. and Blanchard, P. and Lamonier, Carole and Berrier, E. and Kotbagi, T. V. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Cristol, S. and Payen, E. and Lancelot, Christine} } @article { ISI:000310744400011, title = {Selective oxidation of nonrefractory and refractory sulfides by cyclopentadienyl molybdenum acetylide complexes as efficient catalysts}, journal = {Catalysis Letters}, volume = {142}, number = {11}, year = {2012}, month = {NOV}, pages = {1352-1360}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

{The synthesis and catalytic properties of molybdenum acetylide complexes CpMo(CO)(3)(-C CR)

}, keywords = {Homogeneous catalysis, Molybdenum acetylide, Oxo-peroxo species, Refractory sulfide oxidation}, issn = {1011-372X}, doi = {10.1007/s10562-012-0898-x}, author = {Chandgude, Macchindra G. and Biradar, Ankush V. and Kotbagi, Trupti V. and Puranik, Vedavati G. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000307308000020, title = {Transesterification of diethyl oxalate with phenol over sol-gel MoO3/TiO2 catalysts}, journal = {Chemsuschem}, volume = {5}, number = {8}, year = {2012}, month = {JUL}, pages = {1467-1473}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The transesterification of diethyl oxalate (DEO) with phenol to form diphenyl oxalate (DPO) has been carried out in the liquid phase over very efficient MoO3/TiO2 solid-acid solgel catalysts. A selectivity of 100?\% with a remarkable maximum yield of 88?\% were obtained, which opens the route to downstream phosgene-free processes for the synthesis of polycarbonates. Interpretation of the results of various acidity measurements (NH3 and pyridine desorption, methanol oxidation as a probe reaction) allowed us to identify the catalytic sites as Lewis acid sites.

}, keywords = {heterogeneous catalysis, Lewis acids, Oxidation, sol-gel processes, transesterification}, issn = {1864-5631}, doi = {10.1002/cssc.201100802}, author = {Kotbagi, Trupti and Duy Luan Nguyen and Lancelot, Christine and Lamonier, Carole and Thavornprasert, Kaew-Arpha and Zhu Wenli and Capron, Mickael and Jalowiecki-Duhamel, Louise and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck} } @article { ISI:000321203900073, title = {1-Dimensional confinement of porous polyethylenedioxythiophene using carbon nanofibers as a solid template: an efficient charge storage material with improved capacitance retention and cycle stability}, journal = {RSC Advances}, volume = {3}, number = {29}, year = {2013}, month = {APR}, pages = {11877-11887}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Here, we report a highly conducting porous 1-dimensionally (1-D) confined nano hybrid of polyethylenedioxythiophene (PEDOT) using a cup-stacked hollow carbon nanofiber (CNF) as a solid template for potential charge storage applications. The unique features of the nano confinement involve significantly high porosity and conductivity with the establishment of the 1-D architecture. Since the tubular morphology of the CNF with its open tips provides facile routes for the electrolyte, the overall utilization of the active surface and conductivity increases the charge storage properties of PEDOT in the hybrid. The approach helped in achieving a high specific capacitance of 177 F g(-1) for 40\% PEDOT-CNF at a scan rate of 50 mV s(-1) and in retaining 130 F g(-1) even at 3000 mV s(-1) compared to 76 and 30 F g(-1) respectively given by pure PEDOT in 0.5 M H2SO4. The hybrid CP-40 shows a very high power density of 51 kW kg(-1) with an energy density of 4.7 Wh kg(-1). High capacitance retention is supported by the low charge transfer resistance and very low time constant (less than 0.5 s) values for the hybrid using impedance analysis. Phase angle calculations from a Bode plot also show an ideal capacitive nature with -90 degrees phase difference at 0.1 Hz for the hybrids. Apart from all these, the solid CNF backbone helps the hybrid material to display excellent cycle stability with \>98\% retention in capacitance over 4500 charge-discharge cycles compared to pristine PEDOT at a current density of 2 A g(-1).

}, issn = {2046-2069}, doi = {10.1039/c3ra40853a}, author = {Anothumakkool, Bihag and Bhange, Siddheshwar N. and Unni, SreeKuttan M. and Kurungot, Sreekumar} } @article { ISI:000317929800033, title = {3-Dimensionally self-assembled single crystalline platinum nanostructures on few-layer graphene as an efficient oxygen reduction electrocatalyst}, journal = {RSC Advances}, volume = {3}, number = {19}, year = {2013}, month = {FEB}, pages = {6913-6921}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Here, we report for the first time the synthesis of a 3-D self-assembled single crystalline platinum nanostructure directly on the graphene surface (PtNAGE) without using any harmful structural directing agents. A slow reduction method is used to prepare the desired platinum morphology. Initial formation of platinum nanoparticles and their homogenous dispersion on the surface of graphene have been observed 10 h after the commencement of the reduction using formic acid as the reducing agent. From these initially deposited seed particles, the growth starts on the {111} facets along the \< 111 \> direction and the nanostructure formation is completed within 72 h of the commencement of the reaction. The individual assembly has a diameter of similar to 80 nm. PtNAGE shows superior electrocatalytic activity towards oxygen reduction compared to graphene supported platinum (PtGE) and commercial carbon supported platinum (PtC) catalysts. PtNAGE is less vulnerable to strong hydroxyl adsorption compared to PtC and PtGE. Specific activity and mass activity of the catalyst are high compared to PtC by a factor of 6.50 and 1.80, respectively, and 4.00 and 3.05, respectively, compared to PtGE. The limiting current density of PtNAGE is 1.28 and 1.20 times higher than PtGE and PtC, respectively. Kinetic analysis of PtNAGE shows that the oxygen reduction reaction follows first order kinetics involving a four electron transfer mechanism with the direct formation of water. In addition to this, it has been observed that PtNAGE also prevents surface area degradation better than the commercial platinised carbon under potential induced conditions.

}, issn = {2046-2069}, doi = {10.1039/c3ra23112g}, author = {Unni, SreeKuttan M. and Pillai, Vijayamohanan K. and Kurungot, Sreekumar} } @article { ISI:000321965300043, title = {Biosynthesis of antinutritional alkaloids in solanaceous crops is mediated by clustered genes}, journal = {Science}, volume = {341}, number = {6142}, year = {2013}, month = {JUL}, pages = {175-179}, publisher = {AMER ASSOC ADVANCEMENT SCIENCE}, address = {1200 NEW YORK AVE, NW, WASHINGTON, DC 20005 USA}, abstract = {

Steroidal glycoalkaloids (SGAs) such as alpha-solanine found in solanaceous food plants-as, for example, potato-are antinutritional factors for humans. Comparative coexpression analysis between tomato and potato coupled with chemical profiling revealed an array of 10 genes that partake in SGA biosynthesis. We discovered that six of them exist as a cluster on chromosome 7, whereas an additional two are adjacent in a duplicated genomic region on chromosome 12. Following systematic functional analysis, we suggest a revised SGA biosynthetic pathway starting from cholesterol up to the tetrasaccharide moiety linked to the tomato SGA aglycone. Silencing GLYCOALKALOID METABOLISM 4 prevented accumulation of SGAs in potato tubers and tomato fruit. This may provide a means for removal of unsafe, antinutritional substances present in these widely used food crops.

}, issn = {0036-8075}, doi = {10.1126/science.1240230}, author = {Itkin, M. and Heinig, U. and Tzfadia, O. and Bhide, Amey J. and Shinde, B. and Cardenas, Pablo D. and Bocobza, S. E. and Unger, T. and Malitsky, Sergey and Finkers, R. and Tikunov, Y. and Bovy, A. and Chikate, Y. and Singh, P. and Rogachev, I. and Beekwilder, J. and Giri, Ashok P. and Aharoni, Asaph} } @article { ISI:000318296700018, title = {Catalytic dehydration of lactic acid to acrylic acid using calcium hydroxyapatite catalysts}, journal = {Green Chemistry}, volume = {15}, number = {5}, year = {2013}, month = {FEB}, pages = {1211-1217}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of calcium hydroxyapatite (HAP) catalysts were synthesised with a Ca/P ratio ranging from 1.3 to 1.89 by a co-precipitation method that involved changing the pH of the calcium and phosphorous precursors. The physicochemical characterization by XRD, SEM, BET surface area and CO2 and NH3-TPD techniques confirmed the hydroxyapatite formation. These HAP catalysts were used for the vapour phase dehydration of lactic acid to acrylic acid. The HAP catalyst with a Ca/P ratio of 1.3 was found to be the most efficient catalyst among the synthesised series, which gave 100\% conversion of lactic acid and 60\% selectivity towards acrylic acid at 375 degrees C when a 50\% (w/w) aqueous solution of lactic acid was used. The higher selectivity towards acrylic acid has been correlated to the increased acidity and reduced basicity of the HAP catalyst with a Ca/P ratio of 1.3 compared to the other HAP catalysts. The catalyst was found to be very stable and no deactivation was observed even after 300 h of reaction time. In situ FTIR studies were performed for understanding the mechanistic aspects and showed the formation of calcium lactate as an intermediate species during the dehydration of lactic acid to acrylic acid.

}, issn = {1463-9262}, doi = {10.1039/c3gc40144h}, author = {Ghantani, Vidhya C. and Lomate, Samadhan T. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000329137400081, title = {Design of a high performance thin all-solid-state supercapacitor mimicking the active interface of its liquid-state counterpart}, journal = {ACS Applied Materials \& Interfaces}, volume = {5}, number = {24}, year = {2013}, month = {DEC}, pages = {13397-13404}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Here we report an all-solid-state supercapacitor (ASSP) which closely mimics the electrode-electrolyte interface of its liquid-state counterpart by impregnating polyaniline (PANO-coated carbon paper with polyvinyl alcohol-H2SO4 (PVA-H2SO4) gel/plasticized polymer electrolyte. The well penetrated PVA-H2SO4 network along the porous carbon matrix essentially enhanced the electrode-electrolyte interface of the resulting device with a very low equivalent series resistance (ESR) of 1 Omega/cm(2) and established an interfacial structure very similar to a liquid electrolyte. The designed interface of the device was confirmed by cross-sectional elemental mapping and scanning electron microscopy (SEM) images. The PANI in the device displayed a specific capacitance of 647 F/g with an areal capacitance of 1 F/cm(2) at 0.5 A/g and a capacitance retention of 62\% at 20 A/g. The above values are the highest among those reported for any solid-state-supercapacitor. The whole device, including the electrolyte, shows a capacitance of 12 F/g with a significantly low leakage current of 16 mu A(2). Apart from this, the device showed excellent stability for 10000 cycles with a coulombic efficiency of 100\%. Energy density of the PANI in the device is 14.3 Wh/kg.

}, keywords = {all-solid-state, cyclic voltametry, impedance analysis, polyaniline, polyvinyl alcohol, supercapacitor}, issn = {1944-8244}, doi = {10.1021/am404320e}, author = {Anothumakkool, Bihag and Torris, Arun A. T. and Bhange, Siddheshwar N. and Unni, SreeKuttan M. and Badiger, Manohar V. and Kurungot, Sreekumar} } @article { ISI:000328153400006, title = {Design of decanter in heterogeneous azeotropic distillation column by minimizing Gibbs free energy}, journal = {Asia-Pacific Journal of Chemical Engineering}, volume = {8}, number = {6}, year = {2013}, month = {NOV}, pages = {843-848}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

In this paper, liquid-liquid equilibrium in decanter of heterogeneous azeotropic distillation is solved by minimizing Gibbs free energy, by using global optimization technique. The azeotropic distillation column is modeled by solving material balance, equilibrium and summation equations, and repulsive particle swarm optimization (RPSO), a stochastic global optimization formalism, is employed to predict stable steady state solution in decanter. To verify the performance of the RPSO algorithm, it is compared with equation solving method for liquid-liquid equilibria by considering two azeotropic systems, namely (1) benzene-ethanol-water and (2) furfural-water. The proposed methodology shows feasibility of the RPSO algorithm in predicting liquid-liquid equilibrium in decanter of heterogeneous azeotropic distillation. (c) 2013 Curtin University of Technology and John Wiley \& Sons, Ltd.

}, keywords = {decanter, Gibbs free energy, heterogeneous azeotropic distillation, liquid-liquid equilibrium, Optimization, repulsive particle swarm optimization method}, issn = {1932-2135}, doi = {10.1002/apj.1728}, author = {Rahman, Imran and Ubaidullah, S. and Das, Anwesh Kr.} } @article { ISI:000315720000020, title = {Effect of the viscosity of poly(benzimidazole) on the performance of a multifunctional electrocatalyst with an ideal interfacial structure}, journal = {Journal of Materials Chemistry A}, volume = {1}, number = {13}, year = {2013}, month = {JAN}, pages = {4265-4276}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A novel electrocatalyst system with unique multifunctional characteristics, originated by the presence of a proton conducting polybenzimidazole (PBI-BuI) bound layer and electron conducting hollow carbon nanofibers (CNF) with catalytically active Pt nanoparticles, has been devised based on a simple strategy. This was achieved by decorating Pt nanoparticles along the inner cavity, as well as on the outer walls of the hollow CNF support (F-Pt). In a further extension, a low molecular weight PBI, synthesized by optimizing the experimental parameters, was incorporated into the inner cavity and along the outer surfaces of F-Pt. Excellent dispersion of the Pt nanoparticles was achieved by properly utilizing the available carbon surface results in improved electrocatalytic activity, while the CNF backbone ensures high electron conductivity as well. The polymer binder coverage formed along the inner and outer wall surfaces provides an efficient triple phase boundary (TPB) around the Pt nanoparticles to facilitate the electrode reactions. The amount and the viscosity of the PBI-BuI in the electrode material were systematically varied to study the influence on the electrochemical performance. Transmission electron microscopy analysis confirms PBI insertion into the tubular cavity of CNF. Pore size distribution analysis implies that both the viscosity and the amount of PBI-BuI have a pivotal role in defining the microstructure of the electrode. Electrochemical studies using cyclic voltammetry (CV) and rotating disc electrode (RDE) reveal the exceptionally high activity of this hybrid material with an improved electrochemically active area. The significant improvement for the oxygen reduction reaction is further confirmed by the single cell analysis also. The high power density displayed by the PBI-BuI based system, as compared to the Nafion based system, validates the conceptualization of the well controlled triple-phase boundary in the system. These results demonstrate that PBI-BuI has a constructive effect in tuning the electrochemical activity at an optimum amount and at a favourable viscosity of the proton conducting polymer.

}, issn = {2050-7488}, doi = {10.1039/c3ta00165b}, author = {Balan, Beena K. and Unni, Bipinlal and Chaudhari, Harshal D. and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article { ISI:000326745100016, title = {Efficient, direct synthesis of dimethyl carbonate from CO2 using a solid, calcined zirconium phenylphosphonate phosphite catalyst}, journal = {RSC Advances}, volume = {3}, number = {46}, year = {2013}, month = {OCT}, pages = {23993-23996}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Direct synthesis of dimethyl carbonate (DMC) from CO2 and methanol with 100 mol\% selectivity using a solid, reusable, hydrophobic, calcined zirconium phenylphosphonate phosphite catalyst is reported for the first time. DMC yield as high as 26 mmol g(-1) catalyst correlated with the concentration of acid and base sites is obtained.

}, issn = {2046-2069}, doi = {10.1039/c3ra44368j}, author = {Unnikrishnan, Pulikkeel and Varhadi, Poonam and Srinivas, Darbha} } @article { ISI:000325642400017, title = {Electrophile induced branching cascade: a powerful approach to access various molecular scaffolds and their exploration as novel anti-mycobacterial agents}, journal = {Chemical Communications}, volume = {49}, number = {86}, year = {2013}, month = {SEP}, pages = {10109-10111}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein we report on the Electrophile Induced Branching Cascade (EIBC), a new technique to produce a variety of biologically important molecular scaffolds. Some compounds exhibit excellent activities against Mycobacterium smegmatis.

}, issn = {1359-7345}, doi = {10.1039/c3cc45289a}, author = {Patil, Nitin T. and Konala, Ashok and Sravanti, Sudha and Singh, Ashita and Ummanni, Ramesh and Sridhar, Balasubramanian} } @article { ISI:000317558000024, title = {Epoxidation of styrene by t-butyl hydroperoxide over gold nanoparticles supported on Yb2O3: effect of gold deposition method, gold loading, and calcination temperature of the catalyst on its surface properties and catalytic performance}, journal = {Journal of Catalysis}, volume = {300}, year = {2013}, month = {APR}, pages = {217-224}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Surface properties and epoxidation performance of Au/Yb2O3 catalyst are influenced by the method of gold deposition [viz. deposition-precipitation (DP), homogeneous deposition-precipitation (HDP) or impregnation], gold loading (0.9-6.6 wt\%), and the catalyst calcination temperature (400-900 degrees C)]. The catalyst showed the best epoxidation performance when it was prepared by the HDP method and calcined at 500 degrees C. The Au/Yb2O3 catalyst even after calcination at 900 degrees C showed good activity and epoxide selectivity. Both Au-0 and Au3+ surface species were found in the catalyst calcined at 800 degrees C, but only Au-0 species were observed at the lower calcination temperatures (\<600 degrees C). The selectivity for styrene oxide increased continuously with the reaction temperature (from 75 degrees C to 97 degrees C) and time (1-5 h), indicating that styrene oxide did not undergo secondary reactions under these conditions. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Au/Yb2O3 catalyst, Epoxidation of styrene, gold nanoparticles, Styrene oxide, tert-Butyl hydroperoxide}, issn = {0021-9517}, doi = {10.1016/j.jcat.2013.01.002}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Patil, N. S. and Uphade, B. S. and Bhargava, Suresh Kumar} } @article {43363, title = {Extracellular biosynthesis of water dispersible, protein capped Mn5O8 nanoparticles using the fungus fusarium oxysporum and study of their magnetic behavior}, journal = {Journal of Nanoengineering and Nanomanufacturing}, volume = {3}, year = {2013}, month = {JUN}, pages = {91 - 97}, abstract = {

Nanomaterials of different sizes, shapes and compositions are being synthesized by various chemical, physical and biological routes. The pressing need of the hour is to have a synthesis protocol which does not harm the environment in any way and is inexpensive so that the benefits can be reaped by all. In this regard, the biological synthesis routes weigh over the chemical and physical ones which are toxic and expensive respectively. The biological routes occur at ambient conditions of temperature, pressure and pH and help protect the ecosystem as these do not employ any hazardous chemicals. Moreover, the nanoparticles obtained via biological routes are naturally protein capped which prevents their agglomeration and helps them retain their shape, size and stability for several months. One such important material is manganese oxide (Mn5O8) which at the nanoscale, has found good use in catalysis and as ionic conductors in fuel cells or batteries. The compound Mn5O8 exists in mixed valences of Mn2+ and Mn4+ and has drawn attention due to its antiferromagnetic nature. Here we report extracellular biosynthesis of manganese oxide (Mn5O8 nanoparticles in the size range of 10{\textendash}11 nm at room temperature by challenging the fungus Fusarium oxysporum with manganese (II) acetate tetrahydrate [(CH3CO2)2 Mn {\textperiodcentered} 4H2O] as precursor. The Mn5O8 nanoparticles so formed were characterized by TEM, XRD, FTIR, XPS, and TGA. Two mixed manganese ion valencies (Mn2+ and Mn4+) of Mn5O8 have been confirmed by XPS studies and antiferromagnetic transitions by magnetic measurements.

}, doi = {10.1166/jnan.2013.1125}, author = {Uddin, Imran and Poddar, Pankaj} } @article { ISI:000319680800041, title = {Isolation, characterization, and identification of catalytically active species in the MoO3/SiO2 catalyst during solid acid catalyzed reactions}, journal = {Chemcatchem}, volume = {5}, number = {6}, year = {2013}, month = {JUN}, pages = {1531-1537}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report the isolation, characterization, and identification of the catalytically active species formed during various acid-catalyzed reactions if silica-supported MoO3 was used as a catalyst. We have reported previously the synthesis and extensive characterization of the silica-supported MoO3 catalyst prepared by the sol-gel process with ammonium heptamolybdate and ethyl silicate-40 as molybdenum and silica precursors, respectively. The TEM images showed uniformly distributed MoO3 nanoparticles on the high-surface area mesoporous silica support and high acidity (0.9mmolg-1) by using temperature-programmed desorption of ammonia (NH3-TPD) analysis. This catalyst has already shown high activity for various acid-catalyzed reactions. To understand the nature of catalytically active species formed during the reaction, the liquid-phase esterification of acetic acid and ethanol was studied as a probe reaction with very high acid conversion (83\%) in 8h. During esterification, the reaction mixture turned blue, which indicated a change in the nature of the catalyst under reaction conditions. These catalytically active species formed in the reaction mixture were isolated and extensively characterized by using FTIR, Raman, powder XRD, BET surface area, NH3-TPD, energy dispersive X-ray, and TEM analysis. The characterization results revealed the insitu formation of silicomolybdic acid on the silica surface in the presence of water, which acts as catalytically active species responsible for the acid-catalyzed reactions.

}, keywords = {esterification reactions, heterogeneous catalysis, Molybdenum, silicon, sol-gel processes}, issn = {1867-3880}, doi = {10.1002/cctc.201200662}, author = {Kotbagi, Trupti V. and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article {43364, title = {Novel green bio-milling technique for the synthesis of BaTiO3 nanoparticle using Saccharomyces cerevisiae}, journal = {International Journal of Innovative Biological Research}, volume = {2}, year = {2013}, month = {JAN}, pages = {1-5}, abstract = {The development of a novel green top-down approach called bio-milling for synthesizing the oxide nanomaterials is an issue of topical interest. While a number of chemical processes are energy intensive and involve toxic chemicals. Here we report, at room temperature, bio-milling of chemically synthesized barium titinate (BaTiO3) particles by challenging the fungus Saccharomyces cerevisiae against aqueous solution of BaTiO3 to synthesize the biogenic nanoparticles. The extracellular breaking of microscaled BaTiO3 particles by extracellular biomolecules/proteins secreted by the fungus under stressed condition results in the formation of particles in nanoregime. XRD spectra and TEM analysis showed that BaTiO3 particles reduce to their size during the interaction with the fungus Saccharomyces cerevisiae and maintaining their phase and crystallinity after bio-milling process.}, author = {Uddin, Imran and Jaiswal, Adhish and Poddar, Pankaj} } @article { ISI:000318213800029, title = {Promising stability of gold-based catalysts prepared by direct anionic exchange for DeNO (x) applications in lean burn conditions}, journal = {Topics in Catalysis}, volume = {56}, number = {1-8}, year = {2013}, note = {9th International Congress on Catalysis and Automotive Pollution Control (CAPoC), Brussels, BELGIUM, AUG 29-31, 2012}, month = {MAY}, pages = {157-164}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Supported gold catalysts on gamma-Al2O3 have been investigated in the catalytic reduction of NO (x) in simulated Diesel exhaust gas conditions. Different parameters have been examined essentially the mode of gold incorporation via classical deposition-precipitation and anionic exchange methods and the nature of the pre-activation thermal treatment. The resistance to thermal ageing under reactive conditions at 500 A degrees C was found completely different with a significant rate enhancement on anionic-exchange samples. Further comparisons also show that the nature of the pre-activation thermal treatment influences the extent of surface reconstructions during thermal ageing with a detrimental effect of reductive pre-treatment on the catalytic performances.

}, keywords = {Anionic-exchange, Au/Al2O3 catalyst, Deposition-precipitation, NOx abatement, Selective catalytic reduction}, issn = {1022-5528}, doi = {10.1007/s11244-013-9946-z}, author = {Nguyen, D. -L. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Lancelot, Christine and Girardon, J. S. and Dujardin, Christophe and Granger, P.} } @article { ISI:000325548600016, title = {Redox-mediated synthesis of functionalised graphene: a strategy towards 2D multifunctional electrocatalysts for energy conversion applications}, journal = {ChemPlusChem}, volume = {78}, number = {10}, year = {2013}, month = {OCT}, pages = {1296-1303}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A simple, one-step synthetic route for developing a two-dimensional multifunctional electrocatalyst is reported, by the functionalisation of graphene using oxidised ethylenedioxythiophene (O-EDOT). The mutually assisted redox reaction between graphene oxide (GO) and EDOT facilitates the reduction of GO to graphene with a concomitant deposition of O-EDOT on the surface of the graphene. The oxidised surface of GO catalyses the reaction without using an added reducing agent, so a controlled and uniform deposition of O-EDOT is ensured on the surface of graphene, which essentially prevents the restacking of the layers. UV/Visible, IR, Raman and X-ray photoelectron spectroscopy give valid evidence for the reduction and functionalisation of graphene sheets. The functional groups present on the surface of graphene are found to tune the physical and chemical properties of graphene. Consequently, the functionalised material displays enhanced electrocatalytic activity for the reduction of oxygen to water and I3- to I- relative to pristine graphene. These distinct property characteristics make the material a versatile cathode electrocatalyst for both alkaline anion-exchange membrane fuel cells and dye-sensitised solar cells.

}, keywords = {electrocatalysts, fuel cells, graphene, redox chemistry, solar cells}, issn = {2192-6506}, doi = {10.1002/cplu.201300153}, author = {Unni, SreeKuttan M. and Bhange, Siddheshwar N. and Anothumakkool, Bihag and Kurungot, Sreekumar} } @article { ISI:000327915300016, title = {Calcium oxide supported gold nanoparticles as catalysts for the selective epoxidation of styrene by t-butyl hydroperoxide}, journal = {Journal of Colloid and Interface Science}, volume = {415}, year = {2014}, month = {FEB}, pages = {111-116}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Gold nanoparticles are deposited on basic CaO supports as catalysts for the selective conversion of styrene into styrene oxide. Synthetic methods, gold loading and calcination temperatures are varied to permit an understanding of their influence on gold nanoparticle size, the presence of cationic gold species and the nature of interaction between the gold nanoparticles and the CaO support. Based on these studies, optimal conditions are designed to make the Au/CaO catalyst efficient for the selective epoxidation of styrene. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Au/CaO, Epoxidation of styrene, gold nanoparticles, Homogenous deposition precipitation method, Styrene oxide}, issn = {0021-9797}, doi = {10.1016/j.jcis.2013.10.016}, author = {Dumbre, Deepa K. and Choudhary, Vasant R. and Patil, Nilesh S. and Uphade, Balu S. and Bhargava, Suresh Kumar} } @conference {46371, title = {Characteristics of HRV patterns for different yoga postures}, booktitle = {2014 Annual IEEE India Conference (INDICON)}, year = {2014}, month = {DEC}, publisher = {YASHADA, MDC, IEEE Pune Sect; IEEE}, organization = {YASHADA, MDC, IEEE Pune Sect; IEEE}, address = {345 E 47TH ST, NEW YORK, NY 10017 USA}, abstract = {

Human heart rate fluctuates in a complex and non-stationary manner, due to continuous influences from autonomic nervous system and other factors (harmones, temp, etc) on the sinoatrial node (S.A) (Pacemaker of the heart). ANS dysfunction is known to be associated with various cardiovascular and lifestyle diseases. The importance of traditional ancient Indian practice like Yoga has increased significantly due to the observed beneficial effects of it in various lifestyle diseases. Preliminary studies have shown that yoga may have its beneficial effect by influencing autonomic nervous system. Heart rate variability (HRV) is a most promising predictive and prognostic marker of autonomic (ANS) activity. HRV is analyzed by time and frequency domain parameters (Fast Fourier Transform). Being linear parameters these are not able to extract full information regarding the non linear behavior of heart rate fluctuations. In this paper, we propose to analyze HRV by using linear as well as non-linear methods during different yogaasanas. These mathematical models will be useful to understand the underlying physiological mechanisms during different yogasanas.

}, keywords = {ECG, HRV, Poincare plot, Recurrence plot, Yogasanas}, isbn = {978-1-4799-5364-6}, author = {Pitale, Rahul and Tajane, Kapil and Phadke, Leena and Joshi, Aniruddha and Umale, Jayant} } @article { ISI:000347498500064, title = {Effect of pt incorporation in LaBO3 (B = Mn, Fe, Co) perovskites on water gas shift activity}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {395}, year = {2014}, month = {DEC}, pages = {506-513}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Pt incorporated perovskites LaBO3 (B = Mn, Co, Fe) were synthesised and characterised to understand the charge state of Pt in these materials. At the temperature range used in this study, Pt could be stabilised in ionic form in Co and Fe perovskites but not in LaMnO3. Consequent to incorporation of Pt in +2 and +4 oxidation states, reduction in B site ion charge state occurred, enhancing oxygen vacancies. Pt doped Co and Fe perovskites showed high activity for CO conversion under water gas shift conditions but the activity characteristics were found to be different for the two catalysts; LaCo1-xPtxO3-delta showed methanation whereas the Fe counterpart was active in water gas shift reaction. It was also observed that methanation could be decreased and water gas shift enhanced in case of Pt doped Co perovskite when compared to Pt impregnated perovskite or mixed oxides. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Methanation, Perovskites, Pt doping, Water gas shift reaction, XANES}, issn = {1381-1169}, doi = {10.1016/j.molcata.2014.09.015}, author = {Rajesh, Thattarathody and Upadhyay, Anuj and Sinha, Anil K. and Deb, Sudip K. and Devi, R. Nandini} } @article {46361, title = {Fungus-mediated preferential bioleaching of waste material such as fly - ash as a means of producing extracellular, protein capped, fluorescent and water soluble silica nanoparticles}, journal = {PLoS One}, volume = {9}, year = {2014}, month = {SEP }, pages = {e107597}, type = {Article}, abstract = {

In this paper, we for the first time show the ability of the mesophilic fungus Fusarium oxysporum in the bioleaching of waste material such as Fly-ash for the extracellular production of highly crystalline and highly stable, protein capped, fluorescent and water soluble silica nanoparticles at ambient conditions. When the fungus Fusarium oxysporum is exposed to Fly-ash, it is capable of selectively leaching out silica nanoparticles of quasi-spherical morphology within 24 h of reaction. These silica nanoparticles have been completely characterized by UV-vis spectroscopy, Photoluminescence (PL), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Energy dispersive analysis of Xrays (EDAX).

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0107597}, author = {Khan, Shadab Ali and Uddin, Imran and Moeez, Sana and Ahmad, Absar} } @article { ISI:000344978200061, title = {Hollow Co0.85Se nanowire array on carbon fiber paper for high rate pseudocapacitor}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {21}, year = {2014}, month = {NOV}, pages = {18844-18852}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A supercapacitor electrode is fabricated with Co0.85Se hollow nanowires (HNW) array, which is synthesized by wet chemical hydrothermal selenization of initially grown cobalt hydroxyl carbonate nanowires on conductive CFP. The dense self-organized morphology of Co0.85Se HNWs is revealed by scanning/transmission electron microscopy. The as-synthesized Co0.85Se HNWs possess high pseudocapacitive property with high capacitance retention and high durability. The areal capacitance value is seen to vary from 929.5 to 600 mF cm(-2) (60\% retention) as the current density is increased from 1 to 15 mA cm(-2), an increase of a factor of 15. Based on mass loading, this corresponds to a very high gravimetric capacitance of 674 (for 2 mA cm(-2) or 1.48 Ag-1) and 444 Fg(1-) (for 15 mA cm(-2) or 11 A g(-1)) in a full-cell configuration with the Co0.85Se HNWs as cathode and activated carbon as anode (asymmetric configuration) promising results are obtained.

}, keywords = {asymmetric supercapacitor, carbon fiber paper, cobalt selenide, hydrothermal, pseudocapacitor, selenization}, issn = {1944-8244}, doi = {10.1021/am504333z}, author = {Banerjee, Abhik and Bhatnagar, Sumit and Upadhyay, Kush Kumar and Yadav, Prasad and Ogale, Satishchandra} } @article { ISI:000343988200032, title = {Layer-separated distribution of nitrogen doped graphene by wrapping on carbon nitride tetrapods for enhanced oxygen reduction reactions in acidic medium}, journal = {Chemical Communications}, volume = {50}, number = {89}, year = {2014}, month = {SEP}, pages = {13769-13772}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Layer-separated 3D nitrogen doped graphene (NG) with an accessible interstitial surface and modulated activity characteristics for oxygen reduction in acidic medium could be prepared by wrapping NG sheets on in situ generated carbon nitride (CNx) tetrapods.

}, issn = {1359-7345}, doi = {10.1039/c4cc06180b}, author = {Unni, SreeKuttan M. and Illathvalappil, Rajith and Gangadharan, Pranav K. and Bhange, Siddheshwar N. and Kurungot, Sreekumar} } @article { ISI:000327686200049, title = {Magnesia doped Ag/Al2O3 - sulfur tolerant catalyst for low temperature HC-SCR of NOx}, journal = {Applied Catalysis B-Environmental}, volume = {144}, year = {2014}, month = {JAN}, pages = {408-415}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A series of magnesia doped Ag/Al2O3 catalysts were prepared by modified impregnation method using boehmite as alumina precursor. The prepared catalysts were characterized and tested for the SCR of NOx using propene as reductant under lean condition. Doping of magnesia improved the low temperature catalytic activity for HC-SCR of NOx as well as sulfur tolerance. Maximum 98\% NO conversion with 100\% selectivity for N-2 was obtained at 350 degrees C with 7\% Mg doping to Ag/Al2O3. The improvement in low temperature activity and the sulfur tolerance has been correlated to decreased acidity after addition of magnesia to alumina support. In situ FTIR study showed that the deactivation in the presence of SO2 was due to the sulfation of silver and aluminum sites in Ag/Al2O3 catalyst, however its formation was suppressed in case of magnesia doped Ag/Al2O3 improving its sulfur tolerance. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {HC-SCR, Low temperature activity, NOx, Sulfur tolerance}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2013.07.044}, author = {More, Pavan M. and Jagtap, Neelam and Kulal, Atul B. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000334984000005, title = {Methane reforming with carbon dioxide over La-Ni-x-Ce1-x mixed oxide catalysts}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {53}, number = {4-5, SI}, year = {2014}, month = {FEB}, pages = {478-483}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

La-Ni-x-Ce1-x mixed oxide (0 \<= x \<= 1) catalysts have been hydrothermally prepared, characterized by physico-chemical techniques and evaluated for CO2 reforming of methane. High conversions are achieved for both methane and carbon dioxide over the LaNi0.6Ce0.4O3 catalyst tested under the conditions of CO2/CH4/N-2 ratio of 80/80/80. (total flow rate = 240 mL/min), space velocity of 28,800 h(-1) and at a temperature of 800 degrees C. The H-2/CO ratio in the syngas is stable at 0.93 +/- 0.02. Exchanging Ni with Ce, rather than with La as reported in the literature, appears to be a better option for the improved performance of the catalysts.

}, keywords = {Carbon dioxide reforming, Catalysts, Cerium, Dry reforming, Hydrothermal synthesis, Lanthanum, Methane reforming, Mixed oxides, Nickel}, issn = {0376-4710}, author = {Sagar, T. V. and Sreelatha, N. and Hanmant, G. and Upendar, K. and Lingaiah, N. and Rao, Kamaraju Seetha Rama and Satyanarayana, C. V. V. and Reddy, I. A. K. and Prasad, P. S. Sai} } @article { ISI:000333567300064, title = {MOF-derived crumpled-sheet-assembled perforated carbon cuboids as highly effective cathode active materials for ultra-high energy density Li-ion hybrid electrochemical capacitors (Li-HECs)}, journal = {Nanoscale}, volume = {6}, number = {8}, year = {2014}, month = {FEB}, pages = {4387-4394}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Lithium ion hybrid capacitors (Li-HECs) have attracted significant attention for use in next generation advanced energy storage technologies to satisfy the demand of both high power density as well as energy density. Herein we demonstrate the use of very high surface area 3D carbon cuboids synthesized from a metal-organic framework (MOF) as a cathode material with Li4Ti5O12 as the anode for high performance Li-HECs. The energy density of the cell is similar to 65 W h kg(-1) which is significantly higher than that achievable with commercially available activated carbon (similar to 36 W h kg(-1)) and a symmetric supercapacitor based on the same MOF-derived carbon (MOF-DC similar to 20 W h kg(-1)). The MOF-DC/Li4Ti5O12 Li-HEC assembly also shows good cyclic performance with similar to 82\% of the initial value (similar to 25 W h kg(-1)) retained after 10 000 galvanostatic cycles under high rate cyclic conditions. This result clearly indicates that MOF-DC is a very promising candidate for future P-HEVs in a Li-HEC configuration.

}, issn = {2040-3364}, doi = {10.1039/c4nr00025k}, author = {Banerjee, Abhik and Upadhyay, Kush Kumar and Puthusseri, Dhanya and Aravindan, Vanchiappan and Madhavi, Srinivasan and Ogale, Satishchandra} } @article { ISI:000344470100036, title = {Molybdenum(VI) dioxo complexes for the epoxidation of allylic alcohols and olefins}, journal = {Journal of Organometallic Chemistry}, volume = {772}, year = {2014}, month = {DEC}, pages = {271-279}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Several molybdenum(VI) dioxo complexes have been investigated as catalyst precursors for allylic alcohol epoxidation using mainly hydrogen peroxide as oxidant. All catalysts proved to be efficient and selective for the epoxidation of allylic alcohols provided the olefins were rather electron rich. Indeed, electron poor substrates could be converted selectively into the corresponding unsaturated aldehydes. A chiral dioxomolybdenum complex based on an optically pure tridentate Schiff base ligand was synthesized and characterized. Though that complex provided an efficient epoxidation catalyst for allylic alcohols and olefins, no chiral induction was observed. During the X-ray diffraction analysis, the cooling at 100 K led to the appearance of super-lattice reflections on diffraction patterns reflecting an ordering of the structure. Instead of one organometallic species observed at 298 K, three similar complexes of the same molecular structure could be observed in the asymmetric unit at 100 K. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Allylic alcohol, epoxidation, Molybdenum, Oxidation, Peroxide}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2014.09.029}, author = {Pandhare, Swati L. and Jadhao, Rajesh R. and Puranik, Vedavati G. and Joshi, Pranaya V. and Capet, Frederic and Dongare, Mohan K. and Shubhangi B. Umbarkar and Michon, Christophe and Agbossou-Niedercorn, Francine} } @article { ISI:000330799900054, title = {Nickel cobalt sulfide nanoneedle array as an effective alternative to pt as a counter electrode in dye sensitized solar cells}, journal = {RSC Advances}, volume = {4}, number = {16}, year = {2014}, month = {NOV}, pages = {8289-8294}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Self supported nickel cobalt sulfide (NCS) nanoneedles are directly formed on FTO glass substrates by sulphurization of nickel cobalt oxide nanoneedles (grown by a hydrothermal method) in the presence of a hydrogen sulfide and argon gas mixture. These NCS nanoneedles when used as a counter electrode for dye sensitized solar cells (DSSCs) show efficient catalytic activity towards the I-/I-3(-) redox couple, and lead to an impressive efficiency of 6.9\%, compared with 7.7\% obtained with a Pt electrode in similarly constructed devices.

}, issn = {2046-2069}, doi = {10.1039/c3ra45981k}, author = {Banerjee, Abhik and Upadhyay, Kush Kumar and Bhatnagar, Sumit and Tathavadekar, Mukta and Bansode, Umesh P. and Agarkar, Shruti A. and Ogale, Satishchandra B.} } @article { ISI:000341287200025, title = {Nonstoichiometric calcium pyrophosphate: a highly efficient and selective catalyst for dehydration of lactic acid to acrylic acid}, journal = {RSC Advances}, volume = {4}, number = {63}, year = {2014}, month = {JUL}, pages = {33319-33326}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Calcium phosphate catalysts were prepared by co-precipitation method using calcium nitrate and mixtures of ammonium and different sodium phosphates as calcium and phosphate precursors, respectively. Depending on the phosphate precursor, the pH of the synthesis mixture changed during the catalyst precipitation. The catalyst characterisation by XRD and ICP revealed the formation of a calcium pyrophosphate structure with varying Ca/P ratio from 1.02 to 0.76 which could be correlated to the different pH of the synthesis solutions. Vapour phase dehydration of lactic acid to acrylic acid was carried out using these calcium pyrophosphate catalysts. Non-stoichiometric calcium pyrophosphate catalyst with Ca/P ratio 0.76 was found to be the most efficient catalyst among the synthesized series with 100\% lactic acid conversion and 78\% acrylic acid selectivity at 375 degrees C. The higher selectivity for acrylic acid has been correlated to the increased acidity and reduced basicity of non-stoichiometric calcium pyrophosphate compared to other stoichiometric pyrophosphates. In situ FTIR studies showed the formation of a higher amount of calcium lactate on non-stoichiometric compared to stoichiometric pyrophosphate leading to higher selectivity for acrylic acid.

}, issn = {2046-2069}, doi = {10.1039/c4ra06429a}, author = {Ghantani, Vidhya C. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000344382800045, title = {One-pot synthesis of ultrasmall MoO3 nanoparticles supported on SiO2, TiO2, and ZrO2 nanospheres: an efficient epoxidation catalyst}, journal = {Journal of Materials Chemistry A}, volume = {2}, number = {44}, year = {2014}, month = {SEP}, pages = {19060-19066}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Ultrasmall molybdenum oxide (MoO3) nanoparticles supported on various (SiO2, TiO2 or ZrO2) nanospheres were synthesized in one pot using a reverse micelle method. The prepared catalysts were thoroughly characterized by various physico-chemical methods. TEM images showed uniform dispersion of MoO3 nanoparticles (1.5-4 nm) onto silica (similar to 275 nm). No separate MoO3 particles were identified from TEM for MoO3/TiO2 (similar to 10.5 nm) and MoO3/ZrO2 (similar to 6.5 nm) because AHM reacted with titanium and zirconium hydroxides to form solid solution. Among the prepared catalysts MoO3/SiO2 showed excellent catalytic activity (up to 90\% conversion and 100\% epoxide selectivity) for olefin epoxidation. The catalyst was successfully recycled up to five cycles without losing much activity and selectivity.

}, issn = {2050-7488}, doi = {10.1039/c4ta03754e}, author = {Chandra, Prakash and Doke, Dhananjay S. and Shubhangi B. Umbarkar and Biradar, Ankush V.} } @article {45975, title = {Palladium nanoparticles supported on magnesium hydroxide fluorides: a selective catalyst for olefin hydrogenation}, journal = {ChemCatChem}, volume = {6}, year = {2014}, month = {NOV}, pages = {3182-3191}, type = {Article}, abstract = {

A one-pot synthesis of palladium nanoparticles supported on magnesium hydroxide fluoride has been performed with the fluorolytic sol-gel method. The prepared catalysts were characterized by using various physicochemical techniques. The sol-gel method led to high surface area (\>135 m(2)g(-1)), mesoporous catalysts (pore volume=0.19-0.23 cm(3)g(-1), pore diameter=3-5 nm) with uniformly dispersed palladium nanoparticles approximately 2 nm in diameter on the surface. The catalysts synthesized by using different concentrations of aqueous hydrofluoric acid exhibited changing surface and acidic properties. Very high dispersion of palladium on magnesium fluoride (47\%) was obtained with 1 wt\% palladium loading. The catalysts were used for hydrogenation of various olefins in the presence of other organic functionalities at room temperature and atmospheric hydrogen pressure. Various substituted olefins were hydrogenated with almost 100\% conversion and selectivity. The catalysts were recycled efficiently over five cycles without appreciable loss in catalytic activity. There was no palladium leaching under the reaction conditions, which was confirmed by inductively coupled plasma atomic emission spectroscopy analysis. Activation of olefin on the catalyst surface could not be observed by in situ FTIR studies, indicating facile activation of hydrogen on the palladium supported on magnesium hydroxide fluoride.

}, keywords = {alkenes, heterogeneous catalysis, Hydrogenation, magnesium fluorides, Palladium}, issn = {1867-3880}, doi = {10.1002/cctc.201402469}, author = {Acham, Vaibhav R. and Biradar, Ankush V. and Dongare, Mohan K. and Kemnitz, Erhard and Umbarkar, Shubhangi B.} } @article { ISI:000341779000037, title = {Surfactant free gram scale synthesis of mesoporous Ni(OH)(2)-r-GO nanocomposite for high rate pseudocapacitor application}, journal = {RSC Advances}, volume = {4}, number = {75}, year = {2014}, month = {AUG}, pages = {39875-39883}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report a single-step surfactant-free gram scale hydrothermal synthesis of mesoporous Ni(OH)(2) nanoparticles and the Ni(OH)(2)-reduced graphene oxide (Ni(OH)(2)-r-GO) nanocomposite. Interesting morphological features are noted. These nanomaterials are examined and compared as cathode materials for pseudo-capacitor application through detailed characterizations. A high specific capacitance (C-s) of 1538 F g(-1) is observed for Ni(OH)(2)-r-GO even at a high current density of 40 A g(-1), whereas at the same current rate, bare Ni(OH)(2) shows C-s of only 936 F g(-1).

}, issn = {2046-2069}, doi = {10.1039/c4ra06601d}, author = {Singh, Upendra and Banerjee, Abhik and Mhamane, Dattakumar and Suryawanshi, Anil and Upadhyay, Kush Kumar and Ogale, Satishchandra} } @article { ISI:000330779900044, title = {Synthesis of an efficient heteroatom-doped carbon electro-catalyst for oxygen reduction reaction by pyrolysis of protein-rich pulse flour cooked with SiO2 nanoparticles}, journal = {Physical Chemistry Chemical Physics}, volume = {16}, number = {9}, year = {2014}, month = {JAN}, pages = {4251-4259}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Development of a highly durable, fuel-tolerant, metal-free electro-catalyst for oxygen reduction reaction (ORR) is essential for robust and cost-effective Anion Exchange Membrane Fuel Cells (AEMFCs). Herein, we report the development of a nitrogen-doped (N-doped) hierarchically porous carbon-based efficient ORR electrocatalyst from protein-rich pulses. The process involves 3D silica nanoparticle templating of the pulse flour(s) followed by their double pyrolysis. The detailed experiments are performed on gram flour (derived from chickpeas) without any in situ/ex situ addition of dopants. The N-doped porous carbon thus generated shows remarkable electrocatalytic activity towards ORR in the alkaline medium. The oxygen reduction on this material follows the desired 4-electron transfer mechanism involving the direct reduction pathway. Additionally, the synthesized carbon catalyst also exhibits good electrochemical stability and fuel tolerance. The results are also obtained and compared with the case of soybean flour having higher nitrogen content to highlight the significance of different parameters in the ORR catalyst performance.

}, issn = {1463-9076}, doi = {10.1039/c3cp55396e}, author = {Gokhale, Rohan and Unni, SreeKuttan M. and Puthusseri, Dhanya and Kurungot, Sreekumar and Ogale, Satishchandra} } @conference { ISI:000358999700317, title = {To study non linear features in circadian heart rate variability amongst healthy subjects}, booktitle = {2014 International Conference on Advances in Computing, Communications and Informatics (ICACCI)}, year = {2014}, note = {3rd International Conference on Advances in Computing, Communications and Informatics (ICACCI), New Delhi, INDIA, SEP 24-27, 2014}, month = {SEP}, pages = {1921-1927}, publisher = {IEEE, 345 E 47th ST, New York, NY 10017 USA}, organization = {IEEE, 345 E 47th ST, New York, NY 10017 USA}, address = {New Delhi, India}, abstract = {

ECG signal is used for diagnosis of ailments of heart. HRV is used as a predictive and prognostic marker of autonomic dis-functioning. ANS is known to influence heart and any dis-functioning of this system leads to cardiac disorders. ANS has endogenous circadian rhythm. Circadian rhythms are responsible for physical, mental and behavioral changes that follow a roughly 24-hour cycle. Previous studies have shown large inter and intra individual differences in HRV which has lead to difficulties in establishing standard norms. Therefore the aim of our study is to establish a brief protocol for HRV analysis where we will be able to extract features in shorter duration of recording, representative of 24 hour fluctuations in HRV. In this paper we have studied different linear as well as non-linear techniques to analyze circadian HRV. 24 hour ECG recording of 15 subjects using Minimum Activity Protocol subjected for HRV analysis.

}, keywords = {Circadian Rhythm, Correlation Dimensions, DFA, ECG, HRV}, isbn = {978-1-4799-3080-7}, author = {Tajane, Kapil and Pitale, Rahul and Phadke, Leena and Joshi, Aniruddha and Umale, Jayant} } @article { ISI:000331774700017, title = {Two-in-one: inherent anhydrous and water-assisted high proton conduction in a 3D metal-organic framework}, journal = {Angewandte Chemie-International Edition}, volume = {53}, number = {10}, year = {2014}, month = {MAR}, pages = {2638-2642}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The development of solid-state proton-conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel-cell technology. A 3Dmetal-organic framework (MOF) with acid-base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water-assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid-state proton-conducting materials that work under both anhydrous and humid conditions.

}, keywords = {conducting materials, fuel cells, metal-organic frameworks, porous materials, proton conduction}, issn = {1433-7851}, doi = {10.1002/anie.201309077}, author = {Nagarkar, Sanjog S. and Unni, SreeKuttan M. and Sharma, Amitosh and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article { ISI:000354505100017, title = {Activation by pretreatment of Ag-Au/Al2O3 bimetallic catalyst to improve low temperature HC-SCR of NOx for lean burn engine exhaust}, journal = {Applied Catalysis B-Environmental}, volume = {174}, year = {2015}, month = {SEP}, pages = {145-156}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ag-Au/Al2O3 catalyst was synthesised by successive impregnation of 1\% Au and 1\% Ag on in-house prepared high surface area alumina (450 m(2)/g). The corresponding monometallic catalysts were also prepared by loading 1\% Ag or 1\% Au on the same high surface area alumina for comparison. The catalysts were characterised by various physico-chemical techniques and tested for SCR activity under lean burn engine exhaust conditions. Ag-Au/Al2O3 catalyst prepared by successive impregnation method showed considerably higher NO reduction (100\%) to N-2 compared to 1\% Au/Al2O3 (70\%) whereas the activity was comparable with that of 1\% Ag/Al2O3 (96\%). The effect of various pretreatments on SCR activity of Ag-Au/Al2O3 was studied and pretreatment at 250 degrees C in flow of hydrogen was found to give the best results with 100\% NO conversion to N-2 at 353 degrees C. Further ageing of the catalyst under reaction feed at 500 degrees C resulted in considerable increase in low temperature activity of bimetallic catalyst with similar to 40\% NO conversion at 222 degrees C. Even though the SCR activity of pretreated Ag-Au/Al2O3 and Ag/Al2O3 were comparable, after ageing the Ag-Au/Al2O3 showed significantly higher NO conversion (95\%) compared to Ag/Al2O3 (83\%) and Au/Al2O3 (70\%). The formation of H-2 and CO due to steam reforming of higher hydrocarbon (decane) was evidenced at the temperature of highest deNO(x) activity. Detailed investigation of the textural properties of the pretreated and aged catalysts showed presence of well dispersed metallic Au and Ag-n(delta+) clusters after pretreatment in hydrogen at 250 degrees C. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Ag-Au bimetallic catalyst, Catalyst ageing, dispersion, Low temperature HC-SCR, Steam reforming}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2015.02.035}, author = {More, Pavan M. and Nguyen, Duy L. and Granger, Pascal and Dujardin, Christophe and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000364355500053, title = {Carbon nanohorn-derived graphene nanotubes as a platinum-free fuel cell cathode}, journal = {ACS Applied Materials \& Interfaces}, volume = {7}, number = {43}, year = {2015}, month = {NOV}, pages = {24256-24264}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Current low-temperature fuel cell research mainly focuses on the development of efficient nonprecious electrocatalysts for the reduction of dioxygen molecule due to the reasons like exorbitant cost and scarcity of the current state-of-the-art Pt-based catalysts. As a potential alternative to such costly electrocatalysts, we report here the preparation of an efficient graphene nanotube based oxygen reduction electrocatalyst which has been derived from single walled nanohorns, comprising a thin layer of graphene nanotubes and encapsulated iron oxide nanopartides (FeGNT). FeGNT shows a surface area of 750 m(2)/g, which is the highest ever reported among the metal encapsulated nanotubes. Moreover, the graphene protected iron oxide nanoparticles assist the system to attain efficient distribution of Fe-N-x and quaternary nitrogen based active reaction centers, which provides better activity and stability toward the oxygen reduction reaction (ORR) in acidic as well as alkaline conditions. Single cell performance of a proton exchange membrane fuel cell by using FeGNT as the cathode catalyst delivered a maximum power density of 200 mW cm(-2) with Nafion as the proton exchange membrane at 60 degrees C. The facile synthesis strategy with iron oxide encapsulated graphitic carbon morphology opens up a new horizon of hope toward developing Pt-free fuel cells and metal-air batteries along with its applicability in other energy conversion and storage devices.

}, keywords = {carbon nanohorns, carbon nanotube, electrocatalyst, fuel cell, oxygen reduction reaction}, issn = {1944-8244}, doi = {10.1021/acsami.5b07802}, author = {Unni, SreeKuttan M. and Illathvalappil, Rajith and Bhange, Siddheshwar N. and Puthenpediakkal, Hasna and Kurungot, Sreekumar} } @article { ISI:000362819600016, title = {CoSe2 supported on nitrogen-doped carbon nanohorns as a methanol-tolerant cathode for air-breathing microlaminar flow fuel cells}, journal = {Chemelectrochem}, volume = {2}, number = {9}, year = {2015}, month = {SEP}, pages = {1339-1345}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

The synthesis of CoSe2 nanoparticles supported on nitrogendoped carbon nanohorns (CoSe2/NCNH) and the influence of the interaction of the metal centre with the NCNH on the oxygen reduction reaction (ORR) are reported. CoSe2/NCNH shows a 50 mV lower onset overpotential and a 150 mV positive shift in the half-wave potential compared to CoSe2 supported on carbon and carbon nanohorns. This suggests that the intrinsic activity and the density of active reaction centres of CoSe2 are modified by NCNHs. An air-breathing direct meth-anol microlaminar flow fuel cell (mLFFC) is constructed using CoSe2/NCNH as a methanol-tolerant cathode catalyst. A maximum power density of 10.05 mWcm(-2) and a maximum current density of 124.20 mAcm(-2) are achieved with CoSe2/NCNH compared to the non-doped catalyst, CoSe2/C and Pt/C with 5m methanol as the fuel. The improved activity of CoSe2/ NCNH is attributed to the peculiar morphology and the nitrogen doping of the carbon nanohorns. This catalyst could be a suitable alternative to Pt.

}, keywords = {carbon nanohorns, chalcogenides, fuel cells, oxygen reduction reaction, platinum}, issn = {2196-0216}, doi = {10.1002/celc.201500154}, author = {Unni, SreeKuttan M. and Mora-Hernandez, Juan M. and Kurungot, Sreekumar and Alonso-Vante, Nicolas} } @article { ISI:000364803200005, title = {Design, synthesis, and identification of silicon incorporated oxazolidinone antibiotics with improved brain exposure}, journal = {ACS Medicinal Chemistry Letters}, volume = {6}, number = {11}, year = {2015}, month = {NOV}, pages = {1105-1110}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Therapeutic options for brain infections caused by pathogens with a reduced sensitivity to drugs are limited. Recent reports on the potential use of linezolid in treating brain infections prompted us to design novel compounds around this scaffold. Herein, we describe the design and synthesis of various oxazolidinone antibiotics with the incorporation of silicon. Our findings in preclinical species suggest that silicon incorporation is highly useful in improving brain exposures. Interestingly, three compounds from this series demonstrated up to a 30-fold higher brain/plasma ratio when compared to linezolid thereby indicating their therapeutic potential in brain associated disorders.

}, keywords = {Antibacterial, brain exposure, linezolid, oxazolidinone, sila analogue}, issn = {1948-5875}, doi = {10.1021/acsmedchemlett.5b00213}, author = {Seetharamsingh, B. and Ramesh, Remya and Dange, Santoshkumar S. and Khairnar, Pankaj V. and Singhal, Smita and Upadhyay, Dilip and Veeraraghavan, Sridhar and Viswanadha, Srikant and Vakkalanka, Swaroop and Reddy, D. Srinivasa} } @article { ISI:000357468200016, title = {Discovery of rimonabant and its potential analogues as anti-TB drug candidates}, journal = {Medicinal Chemistry Research}, volume = {24}, number = {7}, year = {2015}, month = {JUL}, pages = {2960-2971}, publisher = {SPRINGER BIRKHAUSER}, address = {233 SPRING STREET, 6TH FLOOR, NEW YORK, NY 10013 USA}, abstract = {

Rimonabant and its analogues have been synthesized in moderate to good yields using a simple synthetic route. All the newly synthesized compounds were subjected to in vitro screening against M. tuberculosis and M. smegmatis. The most potent analogue JMG-14 exhibits MIC value of 3.13 compared to 3.25 and 50 A mu g/ml for ethambutol and pyrazinamide, respectively. The molecular docking reveals that pyrazole ring, number and position of halogen atoms play a crucial role in deciding interactions with MTCYP-121. These findings open up a new avenue in the search of potent anti-TB drugs with rimonabant and its novel analogue JMG-14 as lead molecules.

}, keywords = {Diaryl pyrazoles, H37Rv, MTCYP-121, Mycobacterium tuberculosis, Rimonabant, tuberculosis}, issn = {1054-2523}, doi = {10.1007/s00044-015-1346-4}, author = {Gajbhiye, J. M. and More, Namita A. and Patil, Manoj D. and Ummanni, R. and Kotapalli, S. S. and Yogeeswari, P. and Sriram, D. and Masand, Vijay H.} } @article { ISI:000358761200004, title = {Expression of stable reference genes and SPINDLY gene in response to gibberellic acid application at different stages of grapevine development}, journal = {Biologia Plantarum}, volume = {59}, number = {3}, year = {2015}, month = {SEP}, pages = {436-444}, publisher = {ACAD SCIENCES CZECH REPUBLIC, INST EXPERIMENTAL BOTANY}, address = {ROZVOJOVA 263, PRAHA 6, CZ-165 02, CZECH REPUBLIC}, abstract = {

Gibberellic acid (GA(3)) is widely used at different stages of berry development, and to understand the molecular mechanism of its action requires identification of stable reference genes. We sprayed grapevine (Vitis vinifera L.) cv. Thompson Seedless with GA(3) at rachis stage for rachis elongation, at flower cluster stage for flower thinning, and at 3 - 4 mm berry stage for berry elongation. Tissue samples were collected at different time points after GA(3) application. The expression of 10 candidate reference genes was analyzed using 4 different algorithms to assess their suitability for real time-PCR data normalization. Based on the overall ranking, PP2A, Sutra, and SAND were identified as the most stably expressed genes across all samples. With regard to different stages, tubulin, EF1 alpha, and UBC were the most stable genes during rachis elongation; PP2A, SAND, and Sutra were the most suitable at the flower cluster and berry stages. The expression of GA signaling gene SPINDLY (VvSpy) was analyzed to validate the stable reference genes. After the GA(3) application, the expression of VvSpy was reduced at the rachis stage but did not change at the flower cluster and berry stages. The expression profile of VvSpy was comparable when two or three reference genes were used for data normalization.

}, keywords = {developmental stages, Vitis vinifera}, issn = {0006-3134}, doi = {10.1007/s10535-015-0521-2}, author = {Upadhyay, A. and Jogaiah, S. and Maske, S. R. and Kadoo, Narendra Y. and Gupta, V. S.} } @article { ISI:000352115600006, title = {Highly active and reusable ternary oxide catalyst for dialkyl carbonates synthesis}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {398}, year = {2015}, month = {MAR}, pages = {42-49}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The application of ternary oxides, prepared through calcination of rare-earth modified Mg/Al-hydrotalcite (HT), as highly active, selective, and reusable solid catalysts for dialkyl carbonates synthesis by transesterification reaction is reported. Dimethyl carbonate, for example, was prepared by reacting ethylene carbonate with methanol in 100 mol\% selectivity at a yield of 95 mol\%. Among several rare-earth modified precursors, La (10 mol\%)-HT showed the highest activity. This catalyst was active even at ambient conditions. Basicity of the catalyst played crucial role on its performance. The activity of these catalysts was superior to the hitherto known solid catalysts for this reaction. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Dialkyl carbonate, Dimethyl carbonate (DMC), Rare-earth modified hydrotalcite, Solid base catalyst, Ternary oxide, Transesterification of cyclic carbonate}, issn = {1381-1169}, doi = {10.1016/j.molcata.2014.11.022}, author = {Unnikrishnan, P. and Srinivas, D.} } @article { ISI:000348753400054, title = {Highly loaded well dispersed stable Ni species in NiXMg2AlOY nanocomposites: application to hydrogen production from bioethanol}, journal = {Applied Catalysis B-Environmental}, volume = {166}, year = {2015}, month = {MAY}, pages = {485-496}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Inexpensive NiXMg2AlOY nanocomposites with high Ni content (Ni wt\% \> 40\%) are developed as efficient catalysts for the sustainable hydrogen production from a mixture of ethanol and water at low temperature. The NiXMg2AlOY nanocomposites are composed of small and uniform nanoparticles (4-6 nm) of NiO, Ni-Mg-(Al)-O and/or MgO. The strong interactions existing between Ni2+ cations and Mg2+ and/or Al3+ cations either in the Ni-Mg-(Al)-O solid solution and/or at the interface of nanoparticles of NiO and/or Ni-Mg-(Al)-O make the catalyst highly active and stable. The behavior of the solids is analyzed in the presence of low and high concentrations of ethanol while maintaining a H2O/EtOH molar ratio of 3. The NiXMg2AlOY catalysts are shown to be efficient toward H-2 production between 250 and 650 degrees C. In the presence of low concentration of ethanol, on the highly loaded Ni compound (Ni12Mg2AlOY), total conversion of ethanol is obtained at 250 degrees C without formation of CO and carbon, and at 300 degrees C a H-2 yield of 3 mol moletEtOH(-1) is obtained without the formation of CO, exhibiting a remarkable stability with the time on stream even if some carbon is formed. In high concentration of ethanol, total conversion of ethanol is obtained at 450 degrees C on the highly loaded Ni compound (Ni12Mg2AlOY). In such conditions, a stable co-generation of carbon nanofibrous materials which amount increases with Ni content is also obtained. The catalytic stability is related to the type and morphology of the carbon species formed. The correlations among the catalyst properties, the catalytic performances and the characterizations are thoroughly discussed. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Ethanol, Hydrogen, Nanofibrous carbon, nickel oxide, Steam reforming}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.11.052}, author = {Fang, Wenhao and Paul, Sebastien and Capron, Mickael and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck and Jalowiecki-Duhamel, Louise} } @article { ISI:000362662100024, title = {Layer-separated MoS2 bearing reduced graphene oxide formed by an in situ intercalation-cum-anchoring route mediated by Co(OH)(2) as a Pt-free electrocatalyst for oxygen reduction}, journal = {Nanoscale}, volume = {7}, number = {40}, year = {2015}, month = {SEP}, pages = {16729-16736}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A significant improvement in the electrochemical oxygen reduction reaction (ORR) activity of molybdenum sulphide (MoS2) could be accomplished by its layer separated dispersion on graphene mediated by cobalt hydroxide (Co(OH)(2)) through a hydrothermal process (Co(OH)(2)-MoS2/rGO). The activity make-over in this case is found to be originated from a controlled interplay of the favourable modulations achieved in terms of electrical conductivity, more exposure of the edge planes of MoS2 and a promotional role played by the coexistence of Co(OH)(2) in the proximity of MoS2. Co(OH)(2)-MoS2/rGO displays an oxygen reduction onset potential of 0.855 V and a half wave potential (E-1/2) of 0.731 V vs. RHE in 0.1 M KOH solution, which are much higher than those of the corresponding values (0.708 and 0.349 V, respectively) displayed by the as synthesized pristine MoS2 (P-MoS2) under identical experimental conditions. The Tafel slope corresponding to oxygen reduction for Co(OH)(2)-MoS2/rGO is estimated to be 63 mV dec(-1) compared to 68 mV dec(-1) displayed by the state-of-the-art Pt/C catalyst. The estimated number of electrons transferred during oxygen reduction for Co(OH)(2)-MoS2/rGO is in the range of 3.2-3.6 in the potential range of 0.77 V to 0.07 V, which again stands out as valid evidence on the much favourable mode of oxygen reduction accomplished by the system compared to its pristine counterpart. Overall, the present study, thus, demonstrates a viable strategy of tackling the inherent limitations, such as low electrical conductivity and limited access to the active sites, faced by the layered structures like MoS2 to position them among the group of potential Pt-free electrocatalysts for oxygen reduction.

}, issn = {2040-3364}, doi = {10.1039/c5nr04415d}, author = {Illathvalappil, Rajith and Unni, SreeKuttan M. and Kurungot, Sreekumar} } @article { ISI:000351435100014, title = {Microwave-assisted synthesis of few-layered TaTe2 and its application as supercapacitor}, journal = {European Journal of Inorganic Chemistry}, number = {9}, year = {2015}, month = {MAR}, pages = {1598-1603}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report a simple and rapid microwave-assisted synthesis of tantalum telluride (TaTe2) nanosheets. The ratio of tantalum pentachloride (TaCl5) and elemental tellurium (Te) powder were adjusted in the presence of NaBH4 in such a way as to obtain the TaTe2 nanosheet. The samples were characterized by various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), UV/Vis spectroscopy, photoluminescence (PL) spectroscopy, and XRD. Our SEM, TEM, and AFM results show the formation of sheet-like morphology, while the XRD data confirms the high crystalline quality and stable phase of the TaTe2 formed. The supercapacitor cells were fabricated by using TaTe2 nanosheets as anode material, platinum metal wire as a counterelectrode, and Ag/AgCl as reference electrode. The calculated coulombic efficiency is more than 95\%, while the cycle-to-cycle decrease in capacity is less than 5\%. The maximum discharge or charging capacity is below 2.4 Wh/kg, which is an ideal characteristic for achieving supercapacitor behavior.

}, keywords = {Microwave chemistry, Nanostructures, Supercapacitors, Tantalum, Tellurium}, issn = {1434-1948}, doi = {10.1002/ejic.201403220}, author = {Chakravarty, Disha and Kumar, Praveen and Ugale, Vaishali S. and Late, Dattatray J.} } @article {45881, title = {Nitrogen-induced surface area and conductivity modulation of carbon nanohorn and its function as an efficient metal-free oxygen reduction electrocatalyst for anion-exchange membrane fuel cells}, journal = {SMALL}, volume = {11}, year = {2015}, month = {JAN }, pages = {352-360}, type = {Article}, abstract = {

Nitrogen-doped carbon morphologies have been proven to be better alternatives to Pt in polymer-electrolyte membrane (PEM) fuel cells. However, efficient modulation of the active sites by the simultaneous escalation of the porosity and nitrogen doping, without affecting the intrinsic electrical conductivity, still remains to be solved. Here, a simple strategy is reported to solve this issue by treating single-walled carbon nanohorn (SWCNH) with urea at 800 degrees C. The resulting nitrogen-doped carbon nanohorn shows a high surface area of 1836 m(2) g(-1) along with an increased electron conductivity, which are the pre-requisites of an electro catalyst. The nitrogen-doped nanohorn annealed at 800 degrees C (N-800) also shows a high oxygen reduction activity (ORR). Because of the high weight percentage of pyridinic nitrogen coordination in N-800, the present catalyst shows a clear 4-electron reduction pathway at only 50 mV overpotential and 16 mV negative shift in the half-wave potential for ORR compared to Pt/C along with a high fuel selectivity and electrochemical stability. More importantly, a membrane electrode assembly (MEA) based on N-800 provides a maximum power density of 30 mW cm(-2) under anion-exchange membrane fuel cell (AEMFC) testing conditions. Thus, with its remarkable set of physical and electrochemical properties, this material has the potential to perform as an efficient Pt-free electrode for AEMFCs.

}, issn = {1613-6810}, doi = {10.1002/smll.201303892}, author = {Unni, SreeKuttan M. and Bhange, Siddheshwar N. and Illathvalappil, Rajith and Mutneja, Nisha and Patil, Kasinath R. and Kurungot, Sreekumar} } @article { ISI:000343686900002, title = {Rational preparation of Ag and Au bimetallic catalysts for the hydrocarbon-SCR of NOx: sequential deposition vs. coprecipitation method}, journal = {Applied Catalysis B-Environmental}, volume = {162}, year = {2015}, month = {JAN}, pages = {11-20}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This study emphasizes the importance of the preparation method for bimetallic Au-Ag catalysts supported on alumina in the selective reduction of NOx by hydrocarbons with gas feed compositions representative of diesel fuelled engine exhaust gas. An optimal balance between oxidative and reductive surface properties is obtained when Au and Ag are successively introduced. Significant re-dispersion processes take place when the catalyst runs at 500 degrees C leading to a gain in activity at low temperature and ascribed to a better interaction between Au and Ag species. Co-precipitation leads to a preferential formation of intermetallic Au-Ag particles which is detrimental to the catalytic performances. Aging at 500 degrees C leads to a significant particle sintering and a strengthening of the metallic character. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Au-Ag particles, Co-precipitation, DeNO(x) reaction, HC-SCR}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.06.031}, author = {More, Pavan M. and Nguyen, D. L. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Nuns, N. and Girardon, J. S. and Dujardin, Christophe and Lancelot, Christine and Mamede, Anne-Sophie and Granger, P.} } @article { ISI:000350221600066, title = {Silica microspheres containing high density surface hydroxyl groups as efficient epoxidation catalysts}, journal = {RSC Advances}, volume = {5}, number = {27}, year = {2015}, month = {FEB}, pages = {21125-21131}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Uniformly sized silica microspheres were synthesized by a hydrolysis-condensation method. The obtained material was etched with a mild aqueous potassium hydroxide solution for different periods of time to break their Si-O-Si bonds and increases the density of hydroxyl groups on their surfaces. The resulting materials were then used as transition metal-free catalysts for oxidation of olefins in the presence of hydrogen peroxide as a green oxidant. The materials were thoroughly characterized using various physicochemical techniques. These highly populated hydroxyl groups on the surface of silica microspheres were proven to be responsible for excellent conversion (up to 93\%) and epoxide selectivity (up to 100\%) for various olefins. Quantum mechanical calculations also corroborate the experimental findings. Furthermore, both experimental and theoretical studies show that tertiary silanols were present at the active sites of the catalyst surface and were responsible for olefin epoxidation.

}, issn = {2046-2069}, doi = {10.1039/c5ra00374a}, author = {Chandra, Prakash and Doke, Dhananjay S. and Shubhangi B. Umbarkar and Vanka, Kumar and Biradar, Ankush V.} } @article { ISI:000349667700031, title = {Surface-modified single wall carbon nanohorn as an effective electrocatalyst for platinum-free fuel cell cathodes}, journal = {Journal of Materials Chemistry A}, volume = {3}, number = {8}, year = {2015}, month = {JAN}, pages = {4361-4367}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Platinum (Pt) and its alloys are routinely used in the cathodes of polymer electrolyte membrane fuel cells (PEMFCs) due to their high electrocatalytic activity in oxygen reduction reactions (ORRs). A variety of alternative materials have been examined as alternatives to Pt, but most of these had low activity and their performance deteriorated even further in use. In the present study an alternate electrocatalyst has been examined, obtained by a simple surface modification of single-walled carbon nanohorns by simultaneous doping with Fe and N at 900 degrees C (FeNCNH-900). This had an ORR activity superior to that of 40 wt\% Pt on carbon (Pt/C). Compared to Pt/C, FeNCNH-900 gave a 30 mV improvement in onset potential and a 20 mV gain in half-wave potential in an ORR. Its high activity is the result of the simultaneous modulation achieved by the high surface area and the microporosity of carbon nanohorns, together with the establishment of the desired nitrogen-iron coordinated pyrrolic active centres. The catalyst showed excellent electrochemical stability and, most notably, its ORR activity was still increasing after 1000 cycles. Single-cell fuel cell performance using FeNCNH-900 as cathode catalyst showed a maximum power density of 35 mW cm(-2) under alkaline conditions.

}, issn = {2050-7488}, doi = {10.1039/c4ta05092d}, author = {Unni, SreeKuttan M. and Ramadas, Sarath and Illathvalappil, Rajith and Bhange, Siddheshwar N. and Kurungot, Sreekumar} } @article { ISI:000360677400002, title = {Triterpenoid profiling and functional characterization of the initial genes involved in isoprenoid biosynthesis in neem (Azadirachta indica)}, journal = {BMC Plant Biology}, volume = {15}, year = {2015}, month = {SEP}, pages = {Article Number: 214}, publisher = {BIOMED CENTRAL LTD}, address = {236 GRAYS INN RD, FLOOR 6, LONDON WC1X 8HL, ENGLAND}, abstract = {

Background: Neem tree (Azadirachta indica) is one of the richest sources of skeletally diverse triterpenoids and they are well-known for their broad-spectrum pharmacological and insecticidal properties. However, the abundance of Neem triterpenoids varies among the tissues. Here, we delineate quantitative profiling of fifteen major triterpenoids across various tissues including developmental stages of kernel and pericarp, flower, leaf, stem and bark using UPLC-ESI (+)-HRMS based profiling. Transcriptome analysis was used to identify the initial genes involved in isoprenoid biosynthesis. Based on transcriptome analysis, two short-chain prenyltransferases and squalene synthase (AiSQS) were cloned and functionally characterized. Results: Quantitative profiling revealed differential abundance of both total and individual triterpenoid content across various tissues. RNA from tissues with high triterpenoid content (fruit, flower and leaf) were pooled to generate 79.08 million paired-end reads using Illumina GA.. platform. 41,140 transcripts were generated by d e novo assembly. Transcriptome annotation led to the identification of the putative genes involved in isoprenoid biosynthesis. Two short-chain prenyltransferases, geranyl diphosphate synthase (AiGDS) and farnesyl diphosphate synthase (AiFDS) and squalene synthase (AiSQS) were cloned and functionally characterized using transcriptome data. RT-PCR studies indicated five-fold and ten-fold higher relative expression level of AiSQS in fruits as compared to leaves and flowers, respectively. Conclusions: Triterpenoid profiling indicated that there is tissue specific variation in their abundance. The mature seed kernel and initial stages of pericarp were found to contain the highest amount of limonoids. Furthermore, a wide diversity of triterpenoids, especially C-seco triterpenoids were observed in kernel as compared to the other tissues. Pericarp, flower and leaf contained mainly ring-intact triterpenoids. The initial genes such as AiGDS, AiFDS and AiSQS involved in the isoprenoids biosynthesis have been functionally characterized. The expression levels of AiFDS and AiSQS were found to be in correlation with the total triterpenoid content in individual tissues.

}, keywords = {Azadirachta indica, Quantitative profiling, Transcriptome, Triterpenoids}, issn = {1471-2229}, doi = {10.1186/s12870-015-0593-3}, author = {Pandreka, Avinash and Dandekar, Devdutta S. and Haldar, Saikat and Uttara, Vairagkar and Vijayshree, Shinde G. and Mulani, Fayaj A. and Aarthy, Thiagarayaselvam and Thulasiram, Hirekodathakallu V.} } @article { ISI:000355656000012, title = {Tuning magnetic behavior of nanoscale cobalt sulfide and its nanocomposite with an engineering thermoplastic}, journal = {Journal of Electronic Materials}, volume = {44}, number = {7}, year = {2015}, month = {JUL}, pages = {2308-2311}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Nanocomposites containing magnetic nanoparticles embedded in a polymer matrix with good thermal stability (up to 200A degrees C) are technologically important. We report an environmentally benign solid-solid approach for synthesis of cobalt sulfide and its nanocomposite using a thermally stable matrix of polyphenylene sulfide. Physicochemical characterizations reveal the formation of nanoclusters of the hexagonal phase CoS. Even though bulk CoS is nonmagnetic, magnetization studies exhibit anomalous magnetic behavior for phase-pure nanoscale CoS and its nanocomposites.

}, keywords = {Nanocomposite, polyphenylene sulfide, Solid-solid reaction, superparamagnetic}, issn = {0361-5235}, doi = {10.1007/s11664-015-3753-1}, author = {Rumale, Narendra and Arbuj, Sudhir S. and Umarji, Govind and Shinde, Manish and Mulik, Uttam P. and Joy, Pattayil Alias and Amalnerkar, Dinesh P.} } @article { ISI:000378790600010, title = {Anti-oxidant properties of ficus religiosa L. Bark extract on human keratinocytes}, journal = {Science of Advanced Materials}, volume = {8}, number = {6}, year = {2016}, month = {JUN}, pages = {1221-1226}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Ficus religiosa (Sacred Fig) is a medicinally important tree, native to the Indian subcontinent. It has been extensively pharmacologically researched species having wide spectrum of medicinal properties. All parts of F. religiosa tree are known to possess important medicinal properties such as anti-oxidant, anti-inflammatory, wound healing and skin diseases etc. However, effects of F. religiosa on skin cells line HaCaT was not studied for its antioxidant properties. In this report we have investigated F. religiosa bark aqueous extract for its antioxidant properties on human keratinocytes (HaCaT) cell line using DPPH, superoxide dismutase 1, superoxide dismutase 2 and catalase assay. We observed that F. religiosa bark aqueous extract efficiently scavenged (80\%) DPPH radicals. Superoxide dismutase1 assay of F. religiosa bark aqueous extract effectively scavenged superoxide radicals (O-2(-)) and showed dose dependent activity. Reactive oxygen species were trapped by superoxide dismutase 2 assay of F. religiosa bark aqueous extract and form hydrogen peroxide. Catalase assay results revelled that hydrogen peroxide was further decomposed to give water and oxygen. Thus various anti-oxidant assays of F. religiosa bark aqueous extract indicate that it efficiently reduced the reactive oxygen species in skin cells.

}, keywords = {Anti-Oxidant, Catalase Assay, DPPH Assay, Ficus religiosa, Keratinocyte HaCaT Cell Line, Moraceae, SOD Assay}, issn = {1947-2935}, doi = {10.1166/sam.2016.2740}, author = {Dixit, Shailesh S. and Kulkarni, Atul and Seo, Hyo Hyun and Gadgil, Jayant and Dingre, Medini and Umar, Ahmad and Moh, Sang Hyun and Parasharami, Varsha A.} } @article {45838, title = {Bioinspired eco-friendly synthesis of ZrO2 nanoparticles}, journal = {Journal of Materials and Environmental Science}, volume = {7}, year = {2016}, month = {AUG}, pages = {3068-3075}, type = {Article}, abstract = {Here we report the extracellular biosynthesis of zirconia (ZrO2) nanoparticles under ambient conditions by challenging the fungus Humicola sp. with potassium hexafluorozirconate (K2ZrF6) as a precursor. Transmission electron micrograph (TEM) showed that nanoparticles are quasi-spherical in shape with an average particle size of 13 nm. The structural investigation was done using selected area electron diffraction (SAED) and powder XRD which show that the nanoparticles are perfectly crystalline with an orthorhombic structure. XPS and FTIR analysis explained the presence of proteins on the nanoparticles surfaces.}, url = {https://www.scopus.com/record/display.uri?eid=2-s2.0-84988430948\&origin=inward\&txGid=25fe3c642542aef24895f8428cb2918b}, author = {Uddin, I. and Ahmad, A.} } @article {43634, title = {Biosynthesis of fluorescent Bi2S3 nanoparticles and their application as dual-functionSPECT-CT probe for animal imaging}, journal = {Current Topics In Medicinal Chemistry}, volume = {16}, year = {2016}, month = {OCT}, pages = {2019-2025}, abstract = {Bismuth sulphide (Bi2S3) is an excellent semiconductor and its nanoparticles have numerous significant applications including photovoltaic materials, photodiode arrays, bio-imaging, etc. Nevertheless, these nanoparticles when fabricated by chemical and physical routes tend to easily aggregate in colloidal solutions, are eco-unfriendly, cumbrous and very broad in size distribution. The aim of the present manuscript was to ecologically fabricate water dispersible, safe and stable Bi2S3 nanoparticles such that these may find use in animal imaging, diagnostics, cell labeling and other biomedical applications. Herein, we for the first time have biosynthesized highly fluorescent, natural protein capped Bi2S3 nanoparticles by subjecting the fungus Fusarium oxysporum to bismuth nitrate pentahydrate [Bi(NO3)(3).5H(2)O] alongwith sodium sulphite (Na2SO3) as precursor salts under ambient conditions of temperature, pressure and pH. The nanoparticles were completely characterized using recognized standard techniques. These natural protein capped Bi2S3 nanoparticles are quasi-spherical in shape with an average particle size of 15 nm, maintain long term stability and show semiconductor behavior having blue shift with a band gap of 3.04 eV. Semiconductor nanocrystals are fundamentally much more fluorescent than the toxic fluorescent chemical compounds (fluorophores) which are presently largely employed in imaging, immunohistochemistry, biochemistry, etc. Biologically fabricated fluorescent nanoparticles may replace organic fluorophores and aid in rapid development of biomedical nanotechnology. Thus, biodistribution study of the so-formed Bi2S3 nanoparticles in male Sprague Dawley rats was done by radiolabelling with Technitium-99m (Tc-99m) and clearance time from blood was calculated. The nanoparticles were then employed in SPECT-CT probe for animal imaging where these imparted iodine equivalent contrast.}, doi = {10.2174/1568026616666160215155347}, author = {Uddin, Imran and Ahmad, Absar and Siddiqui, Ejaz Ahmad and Rahaman, Sk. Hasanur and Gambhir, Sanjay} } @article { ISI:000377891600014, title = {Direct synthesis of dimethyl carbonate from CO2 and methanol over CeO2 catalysts of different morphologies}, journal = {Journal of Chemical Sciences}, volume = {128}, number = {6}, year = {2016}, month = {JUN}, pages = {957-965}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

The direct synthesis of dimethyl carbonate (DMC) from carbon dioxide (CO2) and methanol is an attractive approach towards conversion of the greenhouse gas - CO2 into value-added chemicals and fuels. Ceria (CeO2) catalyzes this reaction. But the conversion efficiency of CeO2 is enhanced when the byproduct water in the reaction medium is separated by employing trapping agents like 2-cyanopyridine (2-CP). In this work, the influence of morphology of CeO2 on the direct synthesis of DMC in presence of 2-CP is reported. CeO2 catalysts of cube, rod, spindle and irregular morphology (Ce - C, Ce - R, Ce - S and Ce - N, respectively) were prepared, characterized and studied as catalysts in the said reaction conducted in a batch mode. Among all, Ce - S shows superior catalytic performance with nearly 100 mol\% of DMC selectivity. Catalytic activity correlates with the concentration of acid and base sites of medium strength as well as defect sites. Ce - S has an optimum number of these active sites and thereby shows superior catalytic performance.

}, keywords = {acid-base catalysis, ceria, CO2 utilization, Dimethyl carbonate, influence of morphology}, issn = {0974-3626}, doi = {10.1007/s12039-016-1094-0}, author = {Unnikrishnan, P. and Darbha, Srinivas} } @article { ISI:000376882500147, title = {Dynamics of colonization and expression of pathogenicity related genes in fusarium oxysporum f.sp ciceri during chickpea vascular wilt disease progression}, journal = {Plos One}, volume = {11}, number = {5}, year = {2016}, month = {MAY}, pages = {Article Number: e0156490}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Fusarium wilt caused by Fusarium oxysporum f.sp. ciceri (Foc) is a constant threat to chickpea productivity in several parts of the world. Understanding the molecular basis of chickpea-Foc interaction is necessary to improve chickpea resistance to Foc and thereby the productivity of chickpea. We transformed Foc race 2 using green fluorescent protein (GFP) gene and used it to characterize pathogen progression and colonization in wilt-susceptible (JG62) and wilt-resistant (Digvijay) chickpea cultivars using confocal microscopy. We also employed quantitative PCR (qPCR) to estimate the pathogen load and progression across various tissues of both the chickpea cultivars during the course of the disease. Additionally, the expression of several candidate pathogen virulence genes was analyzed using quantitative reverse transcriptase PCR (qRT-PCR), which showed their characteristic expression in wilt-susceptible and resistant chickpea cultivars. Our results suggest that the pathogen colonizes the susceptible cultivar defeating its defense; however, albeit its entry in the resistant plant, further proliferation is severely restricted providing an evidence of efficient defense mechanism in the resistant chickpea cultivar.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0156490}, author = {Upasani, Medha L. and Gurjar, Gayatri S. and Kadoo, Narendra Y. and Gupta, Vidya S.} } @article {43586, title = {Epoxide ring-opening reaction by using sol-gel-synthesized palladium supported on a strontium hydroxyl fluoride catalyst}, journal = {Comptes Rendus Chimie}, volume = {19}, year = {2016}, month = {OCT}, pages = {1237-1246}, abstract = {Palladium supported on a strontium hydroxyl fluoride catalyst was synthesized by a one-pot fluorolytic sol-gel method. The prepared catalyst was characterized by various physicochemical techniques. The sol-gel method has led to the formation of a high surface area (57 m(2)g(-1)), mesoporous (pore diameter = 13.0 nm) catalyst with uniform dispersion of Pd nanoparticles of size similar to 7 nm on the surface of strontium hydroxyl fluoride. The catalyst was used for epoxide alcoholysis, and 100\% conversion was obtained with 96\% selectivity for beta-alkoxy alcohols under mild conditions: The catalyst could be recycled for up to three catalytic cycles without any appreciable decrease in conversion and selectivity, indicating the stability of the catalyst under the reaction conditions. Further, the mechanism of alcoholysis was proposed on the basis of the physicochemical characteristics of the catalyst and on the basis of the products formed during the catalytic reaction. (C) 2016 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.}, doi = {10.1016/j.crci.2016.07.008}, author = {Acham, Vaibhav R. and Dongare, Mohan K. and Kemnitz, Erhard and Umbarkar, Shubhangi B.} } @article {45858, title = {Fate of inorganic nanoparticles in agriculture}, journal = {Advanced Materials Letters}, volume = {7}, year = {2016}, month = {JAN}, pages = {3-12}, type = {Review}, abstract = {

In modern world, engineered nanoparticles (ENPs) are increasingly becoming an important component of daily life. They are becoming an integral part of a wide range of man-made products including electronics, paints, biomedical products, sunscreens, clothing, automobiles, etc. Rapid progress in the manufacturing of ENPs and the subsequent increase in its commercial applications always have had an impact on agriculture due to the exposure of living things to these ENPs. Also, human beings are directly dependent on the plants because of their nutritional values. Hence, the impact of nanoparticles on agricultural soil and plants is always of topical interest. It is imperative to be aware of the effects of nanoparticles on soil as well as on the soil ecosystem it supports especially the soil microbes and plants; or more specifically whether they have an influence on the agricultural yield and agri-economy. It is also important to study the effects of man-made nanomaterials on the properties of agricultural soil. This work reviews some of the key features of the impact of ENPs on the environment and the fate of ENPs in agriculture.

}, doi = {10.5185/amlett.2016.6048}, author = {Phogat, N. and Khan, S. A. and Shankar, S. and Ansary, A. A. and Uddin, I.} } @inbook {45859, title = {Heterogeneous catalysis}, booktitle = {Industrial catalytic processes for fine and specialty chemicals}, year = {2016}, pages = {41-111}, publisher = {Elsevier Inc.}, organization = {Elsevier Inc.}, abstract = {A majority of industrial catalytic processes use heterogeneous catalysts because of their engineering advantages. At present, heterogeneous catalysis covers almost 80\% of the global market share. The demand for heterogeneous catalysis is growing annually. In 2010, it was about US 14 billion and expected estimation of it in 2015 is around 20 billion. Understanding at the molecular level the way surfaces of solids catalyze chemical reactions is a challenge in this area of research. This chapter introduces the fundamentals of heterogeneous catalysis, current industrial practices using solid catalysts, reaction steps involved in heterogeneous catalysis, conventional and advanced methods of catalyst preparation, catalyst characterization techniques, causes for catalyst deactivation, steps to avoid deactivation, and methods of catalyst reactivation. }, issn = {978-012801457-8}, doi = {10.1016/B978-0-12-801457-8.00003-3}, author = {Unnikrishnan, P. and Srinivas, D.} } @article { ISI:000374351200005, title = {Next-generation ammonia pretreatment enhances cellulosic biofuel production}, journal = {Energy \& Environmental Science}, volume = {9}, number = {4}, year = {2016}, month = {FEB}, pages = {1215-1223}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new liquid ammonia pretreatment methodology called Extractive Ammonia (EA) was developed to simultaneously convert native crystalline cellulose I-beta (CI) to a highly digestible cellulose IIII (CIII) allomorph and selectively extract up to B45\% of the lignin from lignocellulosic biomass with near-quantitative retention of all polysaccharides. EA pretreated corn stover yielded a higher fermentable sugar yield compared to the older Ammonia Fiber Expansion (AFEX) process while using 60\% lower enzyme loading. The EA process preserves extracted lignin functionalities, offering the potential to co-produce lignin-derived fuels and chemicals in the biorefinery. The single-stage EA fractionation process achieves high biofuel yields (18.2 kg ethanol per 100 kg untreated corn stover, dry weight basis), comparable to those achieved using ionic liquid pretreatments. The EA process achieves these ethanol yields at industrially-relevant conditions using low enzyme loading (7.5 mg protein per g glucan) and high solids loading (8\% glucan, w/v).

}, issn = {1754-5692}, doi = {10.1039/c5ee03051j}, author = {Sousa, Leonardo da Costa and Jin, Mingjie and Chundawat, Shishir P. S. and Bokade, Vijay V. and Tang, Xiaoyu and Azarpira, Ali and Lu, Fachuang and Avci, Utku and Humpula, James and Uppugundla, Nirmal and Gunawan, Christa and Pattathil, Sivakumar and Cheh, Albert M. and Kothari, Ninad and Kumar, Rajeev and Ralph, John and Hahn, Michael G. and Wyman, Charles E. and Singh, Seema and Simmons, Blake A. and Dale, Bruce E. and Balan, Venkatesh} } @article { ISI:000374790700031, title = {Nitrogen and sulphur co-doped crumbled graphene for the oxygen reduction reaction with improved activity and stability in acidic medium}, journal = {Journal of Materials Chemistry A}, volume = {4}, number = {16}, year = {2016}, month = {MAR}, pages = {6014-6020}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Non-precious dioxygen reduction electrocatalysts have attracted great attention nowadays for the development of stable, cost-effective proton exchange membrane fuel cells. In line with the development of non-precious electrocatalysts, here we report the synthesis of a platinum-free oxygen reduction electrocatalyst based on nitrogen and sulphur co-doped crumbled graphene with trace amounts of iron. The co-doped crumbled graphene structure was obtained by simple oxidative polymerisation of ethylenedioxythiophene in aqueous solution followed by an annealing process under an inert atmosphere. This new electrocatalyst displays improved oxygen reduction activity and electrochemical stability under acidic conditions. The half-cell reaction of the 1000 degrees C annealed polyethylenedioxythiophene (PF-1000) displays only 0.1 V overpotential in both the onset and half-wave potentials compared to state-of-the-art Pt/C in an acidic environment for the ORR. More importantly, the limiting current of PF-1000 clearly surpasses the limiting current displayed by Pt/C, indicating that the crumbled assembly of the graphene flakes helps the system to expose the active sites and the porous network of the material matrix ensures extended accessibility of active sites to the electrolyte and reagent. The dioxygen reduction kinetics of PF-1000 appear similar to those of Pt/C and the system accomplishes the reduction of the dioxygen molecule through the recommended four-electron reduction pathway. The improved activity and electrochemical stability of PF-1000 are mainly attributed to the enriched and well accessible active reaction centres such as graphitic nitrogen, sulphur, and iron coordination and the peculiar morphology of PF-1000. Further, a single cell evaluation of a membrane electrode assembly based on PF-1000 as the cathode catalyst delivered a maximum power density of 193 mW cm(-2) at a cell temperature of 60 degrees C using Nafion as the proton conducting membrane.

}, issn = {2050-7488}, doi = {10.1039/c6ta00073h}, author = {Bhange, Siddheshwar N. and Unni, SreeKuttan M. and Kurungot, Sreekumar} } @article { ISI:000372425600097, title = {Physicochemical and antimicrobial photodynamic chemotherapy of unsymmetrical indium phthalocyanines alone or in the presence of magnetic nanoparticles}, journal = {New Journal of Chemistry}, volume = {40}, number = {3}, year = {2016}, month = {JAN}, pages = {2710-2721}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An AB(3) type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B-3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.

}, issn = {1144-0546}, doi = {10.1039/c5nj01922b}, author = {Osifeko, Olawale L. and Uddin, Imran and Mashazi, Philani N. and Nyokong, Tebello} } @article {42900, title = {Repurposing of a drug scaffold: identification of novel sila analogues of rimonabant as potent antitubercular agents}, journal = {European Journal of Medicinal Chemistry}, volume = {122}, year = {2016}, month = {OCT}, pages = {723-730}, abstract = {

The structural similarity between an MmpL3 inhibitor BM212, and a cannabinoid receptor modulator rimonabant, prompted us to investigate the anti-tubercular activity of rimonabant and its analogues. Further optimization, particularly through incorporation of silicon into the scaffold, resulted in new compounds with significant improvement in anti-tubercular activity against Mycobacterium tuberculosis (H37Rv). The sila analogue 18a was found to be the most potent antimycobacterial compound (MIC, 31 ng/mL) from this series with an excellent selectivity index. (C) 2016 Elsevier Masson SAS. All rights reserved.

}, doi = {10.1016/j.ejmech.2016.07.009}, author = {Ramesh, Remya and Shingare, Rahul D. and Kumar, Vinod and Anand, Amitesh and Swetha, B. and Veeraraghavan, Sridhar and Viswanadha, Srikant and Ummanni, Ramesh and Gokhale, Rajesh S. and Reddy, D. Srinivasa} } @article { ISI:000374876700814, title = {Repurposing of old drugs: identification of novel sila analogues of rimonabant as potent antitubercular agents}, journal = {International Journal of Infectious Diseases}, volume = {45}, number = {1}, year = {2016}, month = {APR}, pages = {407-408}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, issn = {1201-9712}, doi = {10.1016/j.ijid.2016.02.870}, author = {Ramesh, R. and Shingare, R. and Anand, Amitesh and Veeraraghavan, S. and Viswanadha, S. and Ummanni, R. and Gokhale, R. and Reddy, D. S.} } @article { ISI:000365050700016, title = {Sol-gel synthesised WO3 nanoparticles supported on mesoporous silica for liquid phase nitration of aromatics}, journal = {Applied Catalysis B-Environmental}, volume = {182}, year = {2016}, month = {MAR}, pages = {142-152}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A series of WO3/SiO2 catalysts have been prepared by sol-gel method using ammonium metatungstate and ethyl silicate-40 (ES-40) as WO3 and SiO2 precursors respectively. The sol-gel method has led to the formation of WO3 nano-particles of 2-5 nm well dispersed on mesoporous silica along with some WO3{\textquoteright} agglomerates. Formation of monoclinic WO3 was seen on the catalysts above 5 wt\% WO3 loading by XRD analysis. Silica has shown very high surface area of 606 m(2)/g which decreased gradually upto 368 m(2)/g with 20 wt\% WO3 loading. 20 wt\% WO3/SiO2 catalyst has shown maximum acidity (0.56 mmol NH3/g) with presence of both Lewis and Bronsted acidity. UV-vis DRS analysis showed formation of polytungstate species along with WO3 on silica surface. The prepared catalysts were used for liquid phase nitration of aromatics using 70\% nitric acid as nitrating agent without using any sulfuric acid. Very high conversion (99\%) was obtained for p-cresol nitration with very high selectivity (99\%) for 2-nitro p-cresol. The water formed during the reaction was removed azeotropically using ethylene dichloride as solvent. In case of o-xylene 74\% conversion was obtained with 54\% selectivity for 4-nitro o-xylene. The effect of different WO3 precursors on nitration efficiency was studied using sodium tungstate and tungstic acid as precursors. However,ammonium metatungstate showed the highest acidity. Sodium tungstate showed formation of dimer of sodium tungstate which did not show any acidity and hence no activity for nitration. The mechanism for nitration using WO3/SiO2 has been proposed based on polarisation of water on tungsten centre generating Bronsted acidity which can further generate nitronium ion giving subsequently nitration of the aromatic ring. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Aromatic nitration, heterogeneous catalysis, Regioselective, Sol-gel synthesis, Water polarization}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2015.09.020}, author = {Kulal, A. B. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000381180000001, title = {Targeted quantification of N-1-(carboxymethyl) valine and N-1-(carboxyethyl) valine peptides of beta-hemoglobin for better diagnostics in diabetes}, journal = {Clinical Proteomics}, volume = {13}, year = {2016}, month = {MAR}, pages = {Article Number: 7}, publisher = {BIOMED CENTRAL LTD}, address = {236 GRAYS INN RD, FLOOR 6, LONDON WC1X 8HL, ENGLAND}, abstract = {

Background: N-1-(Deoxyfructosyl) valine (DFV) beta-hemoglobin (beta-Hb), commonly referred as HbA1c, is widely used diagnostic marker in diabetes, believed to provide glycemic status of preceding 90-120 days. However, the turnover of hemoglobin is about 120 days, the DFV-beta-Hb, an early and reversible glycation product eventually may undergo irreversible advanced glycation modifications such as carboxymethylation or carboxyethylation. Hence quantification of N-1-(carboxymethyl) valine (CMV) and N-1-(carboxyethyl) valine (CEV) peptides of beta-Hb would be useful in assessing actual glycemic status. Results: Fragment ion library for synthetically glycated peptides of hemoglobin was generated by using high resolution-accurate mass spectrometry (HR/AM). Using parallel reaction monitoring, deoxyfructosylated, carboxymethylated and carboxyethylated peptides of hemoglobin were quantified in clinical samples from healthy control, pre-diabetes, diabetes and poorly controlled diabetes. For the first time, we report N-1-beta-valine undergoes carboxyethylation and mass spectrometric quantification of CMV and CEV peptides of beta-hemoglobin. Carboxymethylation was found to be the most abundant modification of N-1-beta-valine. Both CMV-beta-Hb and CEV-beta-Hb peptides showed better correlation with severity of diabetes in terms of fasting glucose, postprandial glucose and microalbuminuria. Conclusions: This study reports carboxymethylation as a predominant modification of N-1-beta-valine of Hb, and quantification of CMV-beta-Hb and CEV-beta-Hb could be useful parameter for assessing the severity of diabetes.

}, keywords = {Diabetes, Diagnosis, Glycation, Glycemic control, HbA1c, Mass spectrometry}, issn = {1542-6416}, doi = {10.1186/s12014-016-9108-y}, author = {Jagadeeshaprasad, Mashanipalya G. and Batkulwar, Kedar B. and Meshram, Nishita N. and Tiwari, Shalbha and Korwar, Arvind M. and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @article {43587, title = {Template-free sol-gel synthesis of high surface area mesoporous silica based catalysts for esterification of di-carboxylic acids}, journal = {Comptes Rendus Chimie}, volume = {19}, year = {2016}, month = {OCT}, pages = {1247-1253}, abstract = {High surface area mesoporous silica based catalysts have been prepared by a simple hydrolysis/sol-gel process without using any organic template and hydrothermal treatment. A controlled hydrolysis of ethyl silicate-40, an industrial bulk chemical, as a silica precursor, resulted in the formation of very high surface area (719 m(2)/g) mesoporous (pore size 67 angstrom and pore volume 1.19 cc/g) silica. The formation of mesoporous silica has been correlated with the polymeric nature of the ethyl silicate-40 silica precursor which on hydrolysis and further condensation forms long chain silica species which hinders the formation of a close condensed structure thus creating larger pores resulting in the formation of high surface mesoporous silica. Ethyl silicate-40 was used further for preparing a solid acid catalyst by supporting molybdenum oxide nanoparticles on mesoporous silica by a simple hydrolysis sol gel synthesis procedure. The catalysts showed very high acidity as determined by NH3-TPD with the presence of Lewis as well as Brensted acidity. These catalysts showed very high catalytic activity for esterification: a typical acid catalyzed organic transformation of various mono- and di-carboxylic acids with a range of alcohols. The in situ formed silicomolybdic acid heteropoly-anion species during the catalytic reactions were found to be catalytically active species for these reactions. Ethyl silicate-40, an industrial bulk silica precursor, has shown a good potential for its use as a silica precursor for the preparation of mesoporous silica based heterogeneous catalysts on a larger scale at a lower cost. (C) 2016 Published by Elsevier Masson SAS on behalf of Academie des sciences.}, doi = {10.1016/j.crci.2016.02.001}, author = {More, Pavan M. and Umbarkar, Shubhangi B. and Dongare, Mohan K.} } @article {43447, title = {Understanding the role of Keggin type heteropolyacid catalysts for glycerol acetylation using toluene as an entrainer}, journal = {Applied Catalysis A-General}, volume = {527}, year = {2016}, month = {OCT}, pages = {9-18}, abstract = {The heterogeneously catalyzed esterification (acetylation) of glycerol toward triacetin in batch mode in presence of toluene as entrainer was studied. Silicotungstic acid, tungstophosphoric acid and phosphomolybdic acid as heteropolyacids (HPAs) supported on silica, alumina or silica-alumina were used as catalysts. The course of the reaction was found to be very sensitive to the nature of the HPA as well as the support. Solid characterization by Raman spectroscopy, XRD, and pyridine-FTIR revealed that only combinations of tungsten-based HPAs and silica support were able to preserve the structure of active component throughout the preparation process, which was essential to obtain active and selective catalysts. The interaction between HPA and support was decisive for stability and dispersion of the catalytically active species. With the best performing catalyst H4SiW12O40/SiO2, selectivity to triacetin reached 71\% at complete conversion within 24h. The high selectivity to triacetin is attributed the Brensted acidic sites originated from stabilized Keggin structure and continuous removal of water during course of reaction. Toluene is able to form azeotropic mixtures with water and acetic acid and keeps the reaction temperature below the boiling point of acetic acid. Thus, water-free reaction conditions can be established. The catalyst was reusable; however, the activity and selectivity towards triacetin slightly decreased in a repetition run due to loss of active sites. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.apcata.2016.08.016}, author = {Kale, S. S. and Armbruster, U. and Eckelt, R. and Bentrup, U. and Umbarkar, Shubhangi B.} } @article {45831, title = {Valorization of coffee bean waste: a coffee bean waste derived multifunctional catalyst for photocatalytic hydrogen production and electrocatalytic oxygen reduction reactions}, journal = {RSC Advances}, volume = {6}, year = {2016}, month = {AUG}, pages = {82103-82111}, type = {Article}, abstract = {

Here, we report the valorization of coffee bean waste (CBW) by producing nitrogen doped porous carbon (p-Cof) having both photocatalytic and electrocatalytic properties using a silica templating method. Morphological investigation of p-Cof reveals the presence of assemblies of highly porous flat carbon blocks. p-Cof exhibits a high surface area (1213 m(2) g(-1)) and a wide range of micro-and mesopores with good electrical conductivity. Along with this, the surface of p-Cof displays the presence of graphitic and pyridone-type nitrogen coordinations, which help p-Cof to perform as a multifunctional catalyst as revealed from its catalytic activities towards photocatalytic hydrogen production (PHP) and electrocatalytic oxygen reduction reactions. p-Cof produces 334 mu mol h(-1) g(-1) of hydrogen from water under visible light and 575 mmol h(-1) g(-1) of hydrogen under solar light irradiation with excellent stability. Along with this, p-Cof also displays improved oxygen reduction reaction (ORR) activity in alkaline medium. A better onset potential (0.91 V vs. RHE) and half-wave potential (0.75 V vs. RHE) are displayed by p-Cof compared to the catalyst derived from the simple annealing of CBW without employing the silica template. Along with the better electrochemical activity, p-Cof shows excellent ORR kinetics and electrochemical stability compared to the current state-of-the-art Pt/C.

}, issn = {2046-2069}, doi = {10.1039/c6ra14907c}, author = {Unni, SreeKuttan M. and George, Leena and Bhange, Siddheshwar N. and Devi, R. Nandini and Kurungot, Sreekumar} } @article { ISI:000368032100012, title = {Vitro and in silico antifungal efficacy of nitrogen- doped carbon nanohorn ( NCNH) against rhizoctonia solani}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {34}, number = {1}, year = {2016}, month = {JAN}, pages = {152-162}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

We have investigated in vitro antifungal efficiency of nitrogen-doped carbon nanohorn (NCNH) against Rhizoctonia solani (R. solani) plant pathogenic fungi. NCNH with size of 50-60nm and concentrations of 10, 50, 100, and 150gmL(-1) were used. The results showed that growth of fungi in the presence of NCNH was significantly (p\>.05) inhibited at 150gmL(-1) (85.13 +/-.97) after 72h. The results were validated through computational approaches. Molecular docking analysis of NCNH with endochitinase protein of R. solani was performed to validate the potential of antifungal activity of NCNH. Docking results showed different conformations of interaction of NCNH with endochitinase enzyme. The conformation with least binding energy -13.54kcal/mol was considered further. It is likely that NCNH interacts with the pathogens by mechanically wrapping, which may be one of the major toxicity actions of NCNH against R. solani. The analysis showed that NCNH might interwinds to endochitinase of R. solani leading to the deactivation of the enzyme. To best of our knowledge, this is the first report of antifungal efficacy of NCNH against R. solani and provides useful information about the application of NCNH in resisting crop disease.

}, keywords = {docking, endochitinase, nitrogen-doped carbon nanohorn, Rhizoctonia solani}, issn = {0739-1102}, doi = {10.1080/07391102.2015.1018841}, author = {Dharni, Seema and Sanchita and Unni, SreeKuttan M. and Kurungot, Sreekumar and Samad, Abdul and Sharma, Ashok and Patra, Dharani Dhar} } @article {43920, title = {Biomimetic synthesis of CdSe nanoparticles with potential bioimaging applications}, journal = {International Journal of Pharmaceutical Sciences and Research}, year = {2017}, month = {JUN}, pages = {2526-2532}, type = {Article}, abstract = {This study presents in vitro biomimetic synthesis of CdSe nanoparticles using the enzyme, NADPH dependent-Nitrate reductase purified from fungus, Fusarium oxysporum. The synthesis of CdSe nanoparticles was accomplished in the presence of a synthetic peptide having amino acid sequence (γ-Glu-Cys-Glu-Cys)-Gly, which acted as binding molecule. The nanoparticles were synthesized in the size range of 3.9{\textendash}9.0 nm was analysed using TEM. Further characterization of nanoparticles was done using techniques such as UV, PL, XPS, and FTIR. The as-synthesized CdSe nanoparticles were water dispersible containing free reactive amino groups. These CdSe nanoparticles were conjugated with bi-antennary and tri-antennary glycopeptides opening up the possibilities for their applications in bioimaging. These significant observations will help better understand the mechanism of biosynthesis of fluorescent nanoparticles using fungi. These findings promise an alternative strategy for an eco-friendly, economical, and large-scale synthesis of water dispersible CdSe nanoparticles. These CdSe nanoparticles have promising biomedical-imaging applications without a need for further functionalization.}, doi = {10.13040/IJPSR.0975-8232.8(6).2526-32}, author = {Ansary, Abu Ayoobul and Uddin, Imran and Khan, Muhammed I.} } @article {43809, title = {Chickpea-fusarium oxysporum interaction transcriptome reveals differential modulation of plant defense strategies}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {AUG}, type = {Article}, abstract = {Fusarium wilt is one of the major biotic stresses reducing chickpea productivity. The use of wilt-resistant cultivars is the most appropriate means to combat the disease and secure productivity. As a step towards understanding the molecular basis of wilt resistance in chickpea, we investigated the transcriptomes of wilt-susceptible and wilt-resistant cultivars under both Fusarium oxysporum f.sp. ciceri (Foc) challenged and unchallenged conditions. Transcriptome profiling using LongSAGE provided a valuable insight into the molecular interactions between chickpea and Foc, which revealed several known as well as novel genes with differential or unique expression patterns in chickpea contributing to lignification, hormonal homeostasis, plant defense signaling, ROS homeostasis, R-gene mediated defense, etc. Similarly, several Foc genes characteristically required for survival and growth of the pathogen were expressed only in the susceptible cultivar with null expression of most of these genes in the resistant cultivar. This study provides a rich resource for functional characterization of the genes involved in resistance mechanism and their use in breeding for sustainable wilt-resistance. Additionally, it provides pathogen targets facilitating the development of novel control strategies.}, doi = {10.1038/s41598-017-07114-x}, author = {Upasani, Medha L. and Limaye, Bhakti M. and Gurjar, Gayatri S. and Kasibhatla, Sunitha M. and Joshi, Rajendra R. and Kadoo, Narendra Y. and Gupta, Vidya S.} } @article {45744, title = {Concurrent synthesis of SnO/SnO2 nanocomposites and their enhanced photocatalytic activity}, journal = {Journal of Solid State Electrochemistry}, volume = {21}, year = {2017}, month = {JAN}, pages = {9-17}, type = {Article}, abstract = {

The SnO/SnO2 nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 A degrees C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO2 for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO2 having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO2 nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt\% confirming the conversion of SnO to SnO2 material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K-app) 0.62 x 10(-2) min(-1).

}, keywords = {Dye-degradation, Nanocomposite, Photocatalysis, tin oxide}, issn = {1432-8488}, doi = {10.1007/s10008-016-3328-y}, author = {Roy, Animesh and Arbuj, Sudhir and Waghadkar, Yogesh and Shinde, Manish and Umarji, Govind and Rane, Sunit and Patil, Kashinath and Gosavi, Suresh and Chauhan, Ratna} } @article {45764, title = {Efficient oxidation of ethyl benzene using in situ generated molybdenum acetylide oxo-peroxo complex as recyclable catalyst}, journal = {Applied Catalysis A-General}, volume = {531}, year = {2017}, month = {FEB }, pages = {45-51}, type = {Article}, abstract = {

Selective oxidation of various alkanes/alkyl aromatics to corresponding carbonyl compounds has been carried out with very high conversion (similar to 98\%) and selectivity (up to 100\%) for carbonyl compounds using cyclopentadienyl molybdenum acetylide complex, CpMo(CO)(3)(C CPh) (1) as catalyst and tert-butyl hydrogen peroxide (TBHP) as an oxidant and turnover number (TON) of 88 was obtained with turnover frequency (TOF) of 2.45 h(-1). Mo acetylide oxo-peroxo species is formed in situ by reaction of 1 with TBHP during the course of reaction as catalytically active species. Interestingly even though the catalytically active species is homogeneous in nature it could be recycled very easily by recovering the catalytically active species as solid after addition of diethyl ether, and separating the products into organic phase. In the case of ethyl benzene oxidation, even after three recycles no appreciable loss in ethyl benzene conversion and acetophenone selectivity was observed. This complex showed high catalytic activity for the oxo functionalization of other alkyl aromatics and alkanes such as substituted ethyl benzenes, toluene as well as cyclohexane. TBHP was found to be more efficient oxidant than hydrogen peroxide for this oxidation. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Alkyl aromatics, Carbonyl compounds, Homogeneous catalysis, Molybdenum acetylide complex, Oxo-peroxo species}, issn = {0926-860X}, doi = {10.1016/j.apcata.2016.12.003}, author = {Khomane, Sonali B. and Doke, Dhananjay S. and Dongare, M. K. and Halligudi, S. B. and Umbarkar, S. B.} } @article {45724, title = {Environmentally benign bioderived carbon microspheres-supported molybdena nanoparticles as catalyst for the epoxidation reaction}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {5}, year = {2017}, month = {JAN}, pages = {904-910}, type = {Article}, abstract = {

A one pot synthesis of molybdenum oxide nanoparticles (NPs supported on bioderived carbon microspheres is reported. The catalyst was synthesized by the low temperature hydrothermal (LTH) method using D-glucose and bagasse as the carbon source. The carbonization of bagasse resulted in the formation of nonuniform carbon microspheres while glucose resulted in uniform carbon spheres. SEM and STEM elemental mapping show the uniform distribution of molybdenum oxide NPs over the carbon microspheres. XPS spectroscopy confirmed that molybdenum was in the Mo6+ oxidation state. The 1\% MoO3 supported on carbon microspheres derived from D-glucose showed excellent catalytic activity up to 100\% olefin conversion with 100\% epoxide selectivity using organic tent-butyl hydroperoxide as an oxidant. The catalyst was successfully used for up to five cycles without losing substantial activity and selectivity.

}, keywords = {Carbon microspheres, epoxidation, heterogeneous catalysis, Hydrothermal synthesis, TBHP}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.6b02229}, author = {Doke, Dhananjay S. and Umbarkar, Shubhangi B. and Gawande, Manoj B. and Zbori, Radek and Biradar, Ankush V.} } @article {43970, title = {Fabrication, characterization and comparison of DSSC using anatase TiO 2 synthesized by various methods}, journal = {Advanced Powder Technology}, year = {2017}, month = {SEP}, type = {Article}, abstract = {In this study, anatase TiO2 nanoparticles were synthesized by three techniques, namely, sol-gel, acid-base co-catalyst and room temperature colloidal methods. The synthesized materials were characterized by X-ray diffraction, scanning electron microscopy, pore diameter, pore volume and surface area. The dye-sensitized solar cells were fabricated using the synthesized materials and characterized for incident photon to current conversion efficiency, photocurrent density to photo voltage measurement and electrochemical impedance analysis. Among the studied materials, TiO2 synthesized by sol-gel method displayed highest photon to current conversion of 76.8\% and a maximum solar cell efficiency of 7.85\% with Jsc of 14.75mA/cm{\texttwosuperior}, Voc of 0.76V and FF of 0.7. This is the first study to report a high power conversion efficiency of DSSC using a sol-gel synthesized titania and its comparison with other two synthesized materials. The high power conversion efficiency of the solar cell using TiO2 synthesized by sol-gel method is attributed to its characteristic properties such high surface area, larger pore diameter and larger pore volume and highest dye loading capacity.}, doi = {10.1016/j.apt.2017.08.012}, author = {Umale, Sanjivani V. and Tambat, Sneha N. and Vediappan, Sudhakar and Sontakke, Sharad M. and Krishnamoorthy, Kothandam} } @article {44401, title = {In situ grown nickel nanoparticles in a calixarene nanoreactor on a graphene-MoS2 support for efficient water electrolysis}, journal = {Sustainable Energy \& Fuels}, volume = {1}, year = {2017}, month = {AUG}, pages = {1329-1338}, abstract = {Electrochemical production of hydrogen, facilitated in electrolysers, holds great promise for energy storage and solar fuel production. Catalysis of the oxygen evolution reaction (OER) is a bottleneck of this process. However, the sluggish OER kinetics and the utilization of precious metal catalysts are key obstacles in the broad deployment of this energy technology. We report the preparation and use of an inexpensive GrMoS(2)SC(8)Ni nanocomposite material as a highly effective OER catalyst in an alkaline electrolyte. Experimental investigations have shown that improvements can be realized in the catalytic performance of Ni metal if it is a component of the composite material. We propose an explanation for these enhancements based on a hydrogen acceptor concept. This concept comprises the stabilization of an *-OOH intermediate, which effectively lowers the potential needed for breaking bonds on the surface. Herein, an inexpensive immobilized SC8 layer was used as the nanoreactor to synthesize metallic Ni nanoparticles (NPs) through an in situ redox process. The process was applied to form immobilized NPs on flat and curved 2D surfaces. The outstanding OER performance of Ni NPs could be attributed to their large surface area, efficient mass and charge transport, and high structural stability arising from the unique SC8 cage structure, built on the GrMoS(2) substrate. The GrMoS(2)SC(8)Ni nanocomposite shows the highest activity, exhibiting a 214 mV overpotential at 10 mA cm(-2) (equivalent to 10\% efficiency of solarto-fuel conversion) and a Tafel slope of 31 mV dec(-1) in 1 M KOH solution. It further demonstrates high stability as there is no apparent OER activity loss (based on a chronoamperometry test) or particle aggregation (based on SEM image observation) after a 10 h anodization test. The facile preparation method and high efficiency and durability enable this electrocatalyst to be a promising candidate for future large-scale applications in water splitting. Thus, this work opens a new avenue toward the development of highly efficient, inexpensive OER catalysts.}, doi = {10.1039/c7se00190h}, author = {Waghmode, Babasaheb J. and Bhange, Siddheshwar N. and Unni, SreeKuttan M. and Patil, Kashinath R. and Malkhede, Dipalee D.} } @article {44172, title = {Nitrogen-doped graphene with a three-dimensional architecture assisted by carbon nitride tetrapods as an efficient metal-free electrocatalyst for hydrogen evolution}, journal = {Chemelectrochem}, volume = {4}, year = {2017}, month = {OCT}, pages = {2643-2652}, type = {Article}, abstract = {Current polymer membrane-based electrolyzers use Pt as a cathode catalyst for efficient reduction of water. The high cost of Pt-based catalysts forces researchers to develop alternative electrocatalysts. Here, a simple strategy has been proposed to synthesize a metal-free electrocatalyst for the hydrogen evolution reaction (HER) by high-temperature annealing of graphene oxide-coated melamine foam. The prepared catalyst possesses both structural and functional advantages with its three-dimensional (3D) interconnected arms of carbon nitride (CNx) backbone wrapped with nitrogen-doped graphene (N-RGO) sheets (CNx@N-RGO). CNx@N-RGO faces only a 193 mV overpotential to achieve a current density of 10mAcm(-2), which is far superior to the previously reported Pt-free systems. Along with the high exchange current density 34.7 x 10(-6)A cm(-2) and low Tafel slope of 54 mV dec(-1), CNx@N-RGO follows a Volmer-Heyrovsky mechanism for the HER. DFT calculations show that the synergy between CNx and N-RGO facilitates good electrical coupling between the two moieties and provides optimal binding to H+ ions on the catalyst that, in turn, results in efficient reduction of hydrogen ions.}, keywords = {carbon nitride, Density functional theory, electrocatalyst, hydrogen evolution reaction, nitrogen doped graphene}, issn = {2196-0216}, doi = {10.1002/celc.201700479}, author = {Gangadharan, Pranav K. and Unni, SreeKuttan M. and Kumar, Nandha and Ghosh, Prasenjit and Kurungot, Sreekumar} } @article {44404, title = {Palladium supported on fluorinated magnesium hydroxide: an efficient catalyst for hydrogenation under ambient conditions}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {NOV}, pages = {10618-10627}, abstract = {

In this study palladium supported on fluorinated magnesium hydroxide (Pd-MgF2-x(OH)(x)) was synthesized by fluorination of magnesium hydroxide using aqueous HF as fluorinating agent. The Mg(OH)(2) dissolves in HF and precipitates as magnesium hydroxide fluoride. The Pd precursor was added in the same pot during precipitation of MgF2-x(OH)(x). The final catalyst after drying at 250 degrees C has shown very high efficiency for hydrogenation of styrene and range of nitro aromatics at room temperature and atmospheric pressure. Hydrogenation of styrene has led to 37\% conversion with 100\% selectivity for hydrogenation of double bond after 3 h. The catalyst was successfully recycled for styrene hydrogenation without appreciable loss in the activity. Further hydrogenation of nitro-aromatics was achieved with 99\% conversion and 100\% aniline selectivity at room temperature and atmospheric pressure. The turnover number of similar to 21774 was obtained for nitrobenzene hydrogenation. The catalyst has shown mesoporous nature (pore volume 0.25 cc/g, pore diameter 4.8 nm) with very high surface area of 106 m(2)/g. The palladium particle size was found to be in the range of 10-11 nm. Acidity measurements by FTIR of adsorbed pyridine revealed presence of Lewis acidic sites with moderate acidity. Mechanistic studies using in-situ FTIR analysis for nitrobenzene hydrogenation revealed activation of nitrobenzene on the Lewis acid sites of the support whereas activation of hydrogen by heterolytic cleavage on Pd center.

}, doi = {10.1002/slct.201702217}, author = {Kokane, Reshma S. and Acham, Vaibhav R. and Kulal, Atul B. and Kemnitz, Erhard and Dongare, Mohan K. and Umbarkar, Shubhangi B.} } @article {45766, title = {Penicillin V acylases from gram-negative bacteria degrade N-acylhomoserine lactones and attenuate virulence in Pseudomonas aeruginosa}, journal = {Applied Microbiology and Biotechnology}, volume = {101}, year = {2017}, month = {MAR}, pages = {2383-2395}, type = {Article}, abstract = {

Virulence pathways in gram-negative pathogenic bacteria are regulated by quorum sensing mechanisms, through the production and sensing of N-acylhomoserine lactone (AHL) signal molecules. Enzymatic degradation of AHLs leading to attenuation of virulence (quorum quenching) could pave the way for the development of new antibacterials. Penicillin V acylases (PVAs) belong to the Ntn hydrolase superfamily, together with AHL acylases. PVAs are exploited widely in the pharmaceutical industry, but their role in the natural physiology of their native microbes is not clearly understood. This report details the characterization of AHL degradation activity by homotetrameric PVAs from two gram-negative plant pathogenic bacteria, Pectobacterium atrosepticum (PaPVA) and Agrobacterium tumefaciens (AtPVA). Both the PVAs exhibited substrate specificity for degrading long-chain AHLs. Exogenous addition of these enzymes into Pseudomonas aeruginosa greatly diminished the production of elastase and pyocyanin and biofilm formation and increased the survival rate in an insect model of acute infection. Subtle structural differences in the PVA active site that regulate specificity for acyl chain length have been characterized, which could reflect the evolution of AHL-degrading acylases in relation to the environment of the bacteria that produce them and also provide strategies for enzyme engineering. The potential for using these enzymes as therapeutic agents in clinical applications and a few ideas about their possible significance in microbial physiology have also been discussed.

}, keywords = {N-acylhomoserine lactone acylase, Ntn hydrolase, pathogenesis, Penicillin Vacylase, Quorum quenching}, issn = {0175-7598}, doi = {10.1007/s00253-016-8031-5}, author = {Sunder, Avinash Vellore and Utari, Putri Dwi and Ramasamy, Sureshkumar and van Merkerk, Ronald and Quax, Wim and Pundle, Archana} } @article {45673, title = {Plant cholesterol biosynthetic pathway overlaps with phytosterol metabolism}, journal = {Nature Plants}, volume = {3}, year = {2017}, month = {JAN}, type = {Article}, abstract = {The amount of cholesterol made by many plants is not negligible. Whereas cholesterogenesis in animals was elucidated decades ago, the plant pathway has remained enigmatic. Among other roles, cholesterol is a key precursor for thousands of bioactive plant metabolites, including the well-known Solanum steroidal glycoalkaloids. Integrating tomato transcript and protein co-expression data revealed candidate genes putatively associated with cholesterol biosynthesis. A combination of functional assays including gene silencing, examination of recombinant enzyme activity and yeast mutant complementation suggests the cholesterol pathway comprises 12 enzymes acting in 10 steps. It appears that half of the cholesterogenesis-specific enzymes evolved through gene duplication and divergence from phytosterol biosynthetic enzymes, whereas others act reciprocally in both cholesterol and phytosterol metabolism. Our findings provide a unique example of nature{\textquoteright}s capacity to exploit existing protein folds and catalytic machineries from primary metabolism to assemble a new, multi-step metabolic pathway. Finally, the engineering of a {\textquoteright}high-cholesterol{\textquoteright} model plant underscores the future value of our gene toolbox to produce high-value steroidal compounds via synthetic biology.}, doi = {10.1038/nplants.2016.205}, author = {Sonawane, P. D. and Pollier, J. and Panda, S. and Szymanski, J. and Massalha, H. and Yona, M. and Unger, T. and Malitsky, S. and Arendt, P. and Pauwels, L. and Almekias-Siegl, E. and Rogachev, I. and Meir, S. and Cardenas, P.D. and Masri, A. and Petrikov, M. and Schaller, H. and Schaffer, A. A. and Kamble, A. and Giri, A. P. and Goossens, A. and Aharoni, A.} } @article {45443, title = { Albumin abundance and its glycation Status determine hemoglobin glycation}, journal = {ACS Omega}, volume = {3}, year = {2018}, month = {OCT}, pages = {12999-13008}, type = {Article}, abstract = {Diabetes diagnosis and management majorly depend upon the measurement of glycated hemoglobin (HbAlc) levels. Various factors influence HbAlc levels such as the use of various analytical methods and the presence of various clinical conditions. Plasma albumin levels were known to be negatively associated with HbAlc. However, the precise mechanism by which they affect HbAlc is not well{\textquoteright} understood. Therefore, we have studied the influence of albumin levels and its glycation status on hemoglobin glycation using erythrocyte culture experiments. Erythrocytes maintained at low albumin concentration exhibited relatively increased albumin and hemoglobin glycation as compared to that in those maintained at higher albumin concentration. Increase in albumin glycation may decrease its ability to protect hemoglobin glycation. This was demonstrated by treatment of erythrocytes with N(epsilon-(carboxymethyl)lysine-modified serum albumin (CMSA), which failed to protect hemoglobin glycation; instead, it increased hemoglobin glycation. The inability of CMSA to reduce hemoglobin glycation was due to the lack of free lysine residues of albumin, which was corroborated by using N(epsilon-(acetyI)lysine serum albumin (AcSA) and clinical diabetic plasma. This is the first study which demonstrates that the modification of lysine residues of albumin impairs its ability to inhibit hemoglobin glycation. Furthermore, correlation studies between HbAlc and albumin levels or relative albumin fructosamine from clinical subjects supported our experimental finding that albumin abundance and its glycation status influence hemoglobin glycation. Therefore, we propose albumin level and its glycation status to be quantified in conjunction with HbAlc for better management of diabetes.}, doi = {10.1021/acsomega.8b01702}, author = {Jagadeeshaprasad, Mashanipalya G. and Venkatasubramani, Vinashya and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @article {44370, title = {Bimetallic Au-Ag/Al2O3 as efficient catalysts for the hydrocarbon selective reduction of NOx from lean burn engine exhaust}, journal = {Catalysis Today}, volume = {306}, year = {2018}, month = {MAY}, pages = {23-31}, type = {Article}, abstract = {Catalytic properties of Au-Ag/Al2O3 catalysts, prepared by successive impregnation, have been investigated for the hydrocarbon selective catalytic reduction (HC-SCR) of NOx. The performances of pre-reduced and aged catalysts were evaluated on synthetic reaction mixtures with gas compositions representative of the exhaust of Diesel powered engines. An optimal 2 wt.\% Ag loading was chosen and the order of introduction during sequential impregnation of Ag or Au on respectively pre-impregnated Au/Al2O3 and Ag/Al2O3 substrates was investigated revealing drastic changes on the catalytic properties after aging. XPS analysis shows a significant silver enrichment irrespective of the preparation route and aging conditions whereas ex situ UV-vis DRS analysis reveals significant electronic disturbances which reflect different interactions between Au and Ag in fresh and aged Au-Ag/Al2O3 and Ag-Au/Al2O3 catalysts. As a consequence, significant rate enhancements in NOx conversion were observed with the superior performance of Au-Ag/Al2O3 but a lower resistance to deactivation at high temperature explained by different behaviour towards redispersion/agglomeration processes highlighted from TEM observations. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cattod.2016.12.002}, author = {More, P. M. and Dongare, M. K. and Umbarkar, S. B. and Granger, P. and Dujardin, C.} } @article {44596, title = {Cyclohexylation of resorcinol with cyclohexanol catalyzed by tungstophosphoric acid supported zirconia catalysts}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {18}, year = {2018}, month = {APR}, pages = {2986-2992}, abstract = {

We demonstrate a highly active and reusable heterogeneous catalyst system, tungstophosphoric acid (TPA) supported on zirconia (ZrO2), for the cyclohexylation of resorcinol by cyclohexanol to produce value added chemicals such as 2-cyclohexyl resorcinol, 4-cyclohexyl resorcinol and 3-Hydroxy cyclohexyl phenyl ether under liquid phase reaction condition. TPA/ZrO2 catalysts prepared with different TPA loadings (5-30 wt.\%) by wet impregnation method and calcined in the temperature range of 650-850 degrees C were characterized by Nitrogen sorption analysis, XRD, FTIR, DTG and DTA, and P-31 MAS NMR spectroscopy. Among the catalysts studied, 15 wt.\% TPA/ZrO2 catalyst calcined at 750 degrees C gave the highest conversion of resorcinol (51.2\%) with the selectivities for 3-Hydroxy cyclohexyl phenyl ether (53.9\%) and 2-cyclohexyl resorcinol and 4-cyclohexyl resorcinol together (46.1\%) under optimum reaction conditions. However, the selectivity of the products were controlled by varying the reaction conditions. At higher conversion of resorcinol (78.9\%), only C-alkylated products were formed at 200 degrees C with 15 wt.\% TPA/ZrO2 catalyst calcined at 750 degrees C. The combination of TPA and ZrO2 coupled with calcination temperature offered an excellent platform for the conversion of resorcinol into O- or C-alkylated products.

}, keywords = {15\% TPA/ZrO2, Cyclohexanol, Cyclohexylation, Keggin TPA, Resorcinol}, issn = {1533-4880}, doi = {10.1166/jnn.2018.14342}, author = {Balasubramanian, V. V. and Devassay, B. M. and Halligudi, S. B. and Deepika, R. and Umbarakar, S. B. and Vinu, A.} } @article {44479, title = {GA3 application in grapes (Vitis vinifera L.) modulates different sets of genes at cluster emergence, full bloom, and berry stage as revealed by RNA sequence-based transcriptome analysis}, journal = {Functional \& Integrative Genomics}, volume = {18}, year = {2018}, month = {JUL}, pages = {439{\textendash}455}, abstract = {In grapes (Vitis vinifera L.), exogenous gibberellic acid (GA3) is applied at different stages of bunch development to achieve desirable bunch shape and berry size in seedless grapes used for table purpose. RNA sequence-based transcriptome analysis was used to understand the mechanism of GA3 action at cluster emergence, full bloom, and berry stage in table grape variety Thompson Seedless. At cluster emergence, rachis samples were collected at 6 and 24 h after application of GA3, whereas flower clusters and berry samples were collected at 6, 24, and 48 h after application at full bloom and 3{\textendash}4 mm berry stages. Seven hundred thirty-three genes were differentially expressed in GA3-treated samples. At rachis and flower cluster stage respectively, 126 and 264 genes were found to be significantly differentially expressed within 6 h of GA3 application. The number of DEG reduced considerably at 24 h. However, at berry stage, major changes occurred even at 24 h and a number of DEGs at 6 and 24 h were 174 and 191, respectively. As compared to upregulated genes, larger numbers of genes were downregulated. Stage-specific response to the GA3 application was observed as evident from the unique set of DEGs at each stage and only a few common genes among three stages. Among the DEGs, 67 were transcription factors. Functional categorization and enrichment analysis revealed that several transcripts involved in sucrose and hexose metabolism, hormone and secondary metabolism, and abiotic and biotic stimuli were enriched in response to application of GA3. A high correlation was recorded for real-time PCR and transcriptome data for selected DEGs, thus indicating the robustness of transcriptome data obtained in this study for understanding the GA3 response at different stages of berry development in grape. Chromosomal localization of DEGs and identification of polymorphic microsatellite markers in selected genes have potential for their use in breeding for varieties with improved bunch architecture.}, keywords = {Bunch architecture, GA3 response, Microsatellite markers, RNA seq, Transcription factors, Vitis vinifera}, issn = {1438-793X}, doi = {10.1007/s10142-018-0605-0}, author = {Upadhyay, Anuradha and Maske, Smita and Jogaiah, Satisha and Kadoo, Narendra Y. and Gupta, Vidya S.} } @article {44485, title = {Global transcriptome analysis of grapevine ( Vitis vinifera L.) leaves under salt stress reveals differential response at early and late stages of stress in table grape cv. Thompson Seedless}, journal = {Plant Physiology and Biochemistry}, volume = {129}, year = {2018}, month = {MAY}, pages = {168-179}, abstract = {Among the different abiotic stresses, salt stress has a significant effect on the growth and yield of grapevine (Vitis vinifera L.). In this study, we employed RNA sequence based transcriptome analysis to study salinity stress response in grape variety Thompson Seedless. Salt stress adversely affected the growth related and physiological parameters and the effect on physiological parameters was significant within 10 days of stress imposition. A total of 343 genes were differentially expressed in response to salt stress. Among the differentially expressed genes (DEGs) only 42 genes were common at early and late stages of stress. The gene enrichment analysis revealed that GO terms related to transcription factors were over-represented. Among the DEGs, 52 were transcription factors belonging to WRKY, EREB, MYB, NAC and bHLH families. Salt stress significantly affected several pathways like metabolic pathways, biosynthesis of secondary metabolites, membrane transport development related pathways etc. 343 DEGs were distributed on all the 19 chromosomes, however clustered regions of DEGs were present on chromosomes 2, 5, 6 and 12 suggesting probable QTLs for imparting tolerance to salt and other abiotic stresses. Real-time PCR of selected genes in control and treated samples of grafted and own root vines demonstrated that rootstock influenced expression of salt stress responsive genes. Microsatellite regions were identified in ten selected salt responsive genes and highly polymorphic markers were identified using fifteen grape genotypes. This information will be useful for the identification of key genes involved in salt stress tolerance in grape. The identified DEGs could also be useful for genome wide analysis for the identification of polymorphic markers for their subsequent use in molecular breeding for developing salt tolerant grape genotypes.}, doi = {10.1016/j.plaphy.2018.05.032}, author = {Upadhyay, Anuradha and Gaonkar, Tulsi and Upadhyay, Ajay Kumar and Jogaiah, Satisha and Shinde, Manisha P. and Kadoo, Narendra and Gupta, Vidya Shrikant} } @article {45452, title = { In situ base release for pH maintenance can allow shake flasks to better mimic bioreactor performance for CHO cell culture}, journal = {Journal of Chemical Technology \& Biotechnology}, volume = {93}, year = {2018}, month = {OCT}, pages = {2842-2850}, type = {Article}, abstract = {BACKGROUNDShake flasks are widely used for evaluating mammalian cells in suspension. Lack of pH control can contribute to differences in culture performance between them and bioreactors. This study evaluates whether a previously reported in situ base releasing hydrogel (pHmH) to counter pH decrease can enable shake flask cultures to better mimic bioreactor cultures. RESULTSCompared with bioreactor culture, fed-batch cultures of a recombinant Chinese hamster ovary (CHO) cell-line in shake flasks without pHmH showed a decrease in pH to 6.6, accompanied by 40, 60 and 22\% lower peak cell density, lactate accumulation, and immunoglobulin G (IgG) titer, respectively. Use of pHmH allowed shake flasks to maintain pH above 6.8 and reduced this difference to 20, 30, and 15\%, respectively, thus enabling culture performance in shake flasks to better mimic the bioreactor. IgG glycosylation profiles were similar in identically fed cultures across all three platforms. Application of pHmH hydrogel during clone screening was evaluated by comparing correlation between titers for five recombinant CHO clones in bioreactors and shake flasks with and without pHmH; a higher correlation was found in shake flasks with pHmH than without. CONCLUSIONIn situ base release through hydrogel can allow identically fed fed-batch cultures in shake flasks to better mimic cell growth, lactate accumulation and IgG titers in bioreactors, without additional infrastructure. (c) 2018 Society of Chemical Industry.}, issn = {0268-2575}, doi = {10.1002/jctb.5635}, author = {Maralingannavar, Vishwanathgouda and Shenoy, Bharath R. and Hazarika, Jahnabi and Unnikrishnan, Divya and Prabhu, Anuja and Maity, Sunit and Gadgil, Mugdha} } @article {44334, title = {Mesoporous tin oxide: an efficient catalyst with versatile applications in acid and oxidation catalysis}, journal = {Catalysis Today}, volume = {309}, year = {2018}, month = {JUL}, pages = {61-76}, type = {Article}, abstract = {Mesoporous tin oxide was prepared by template assisted and template-free methods. As-prepared materials were calcined at various temperatures to generate different nature (Bronsted and Lewis), amount and strength of acidic sites. The physico-chemical properties of the catalysts were studied by XRD, N-2 sorption, pyridine-FTIR, NH3-TPD, DRS UV-vis, TGA, SEM, TEM, H-1 MAS and Sn-119 MAS NMR analyses. The catalytic behavior of mesoporous tin oxide catalysts was evaluated for acetalization and ketalization of glycerol with benzaldehyde and acetone respectively under solvent free conditions. The catalytic performance of mesoporous tin oxide was compared with that of other conventional solid acid catalysts namely H-ZSM-5, H-mordenite, H-beta, Al-MCM-41, Al-SBA-15 and Al-TUD-1. The efficiency of mesoporous tin oxide was also tested for cyclohexene epoxidation reaction. The catalyst prepared by template assisted method showed excellent catalytic performance compared to other catalysts due the difference in nature and amount of acidic sites in the catalyst. Meso-SnO2-T-350 was stable and reusable catalyst for four cycles without any appreciable loss in activity, and therefore it offers a good catalyst for potentially wide applications.}, doi = {10.1016/j.cattod.2017.10.009}, author = {Manjunathan, Pandian and Marakatti, Vijaykumar S. and Chandra, Prakash and Kulal, Atul B. and Umbarkar, Shubhangi B. and Ravishankar, Raman and Shanbhag, Ganapati V.} } @article {45579, title = {Nonconventional method for drying of Pseudomonas aeruginosa and its comparison with conventional methods}, journal = {Drying Technology}, volume = {37}, year = {2018}, month = {MAY}, pages = {839-853}, type = {Article}, abstract = {

In this study, preparation of dried cultures of Pseudomonas aeruginosa using nonconventional drying method, namely, low-temperature low-humidity (LTLH) drying was investigated. The effect of carrier materials (whey protein, corn starch, and trehalose) was examined one at a time and also in combinations (to explore the synergistic effect). The results were compared with those obtained using spray drying and freeze drying in terms of cell survival and dry cell powder yield. The powder samples were analyzed also for morphology, flowability, particle size, and moisture content. In LTLH drying, good cell survival was observed along with high powder yield when compared with that in spray drying. Corn starch showed the highest cell survival (91\%) and powder yield (94\%, w/w) among the carrier materials employed besides resulting in good cell survival (65\%) even after a storage period of 6 months.

}, keywords = {cell survival, Encapsulation, freeze drying, Low-temperature low-humidity (LTLH) drying, Pseudomonas aeruginosa, spray drying}, issn = {0737-3937}, doi = {10.1080/07373937.2018.1469140}, author = {Umashankar, K., and Chandralekha, A. and Dandavate, T., and Tavanandi, H. A. and Raghavarao, K. S. M. S.} } @article {45531, title = {One-pot sequential bromination and fluorination to access 3-fluoroimidazo[1,2-a]pyridines from arylketones}, journal = {European Journal Of Organic Chemistry}, volume = {2018}, year = {2018}, month = {JUL}, pages = {3432-3436}, type = {Article}, abstract = {3-Fluoro-2-arylimidazo[1,2-a]pyridines were selectively synthesised in one-pot from acetophenones and 2-aminopyridines under mild conditions. The sequence of reactions involved bromination, condensation, and late-stage fluorination. Two halogenating reagents play key roles in the process. We found that tetrabutylammonium tribromide and SelectfluorTM gave excellent yields of the desired products in the one-pot sequential reaction. {\textcopyright} 2018 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim}, isbn = {1434193X}, doi = {10.1002/ejoc.201800578}, author = {Udavant, R. N. and Yadav, A. R. and Shinde, S. S.} } @article {44165, title = {Tetranuclear cubane Cu4O4 complexes as prospective anticancer agents: Design, synthesis, structural elucidation, magnetism, computational and cytotoxicity studies}, journal = {Inorganic Chimica Acta}, volume = {473}, year = {2018}, month = {MAR}, pages = {121-132}, abstract = {Two new homometallic Cu4O4 cubane clusters 1 and 2 have been synthesized by self-assembly of copper (II) acetate and ligand, 2-[(2-Hydroxy-3-methoxy-benzylidene)-amino]-2-hydroxymethyl-propane-1, 3-diol (H4L) and characterized thoroughly by various spectroscopic techniques and single crystal X-ray diffraction analysis. Temperature- dependent magnetic susceptibility measurements have been performed to elucidate the antiferromagnetic and ferromagnetic nature in Cu4O4 clusters 1 and 2, respectively. In vitro DNA binding studies of cubane clusters were carried out by employing optical spectroscopic techniques. Gel electrophoretic mobility assay performed to examine the nuclease activity of the complexes 1 and 2 with pBR322 DNA, and results revealed oxidative DNA cleavage via reactive oxygen species (ROS) species viz., O-2(.-), O-1(2), etc. In vitro cell proliferation via MTT assay was studied to calculate the cytotoxicity of complexes 1 and 2. The IC50 evaluated were similar to 20 mu M in MCF-7 (Breast) and similar to 30-35 mu M in HepG2 (Liver) cancer cell lines. Additionally, in the presence of 1 and 2, ROS and TBARS (Thiobarbituric acid reactive substance) levels amplified significantly, coupled with GSH (glutathione) levels in cancer lines. Hence, the results exhibited the major role of ROS in apoptosis induced by 1 and 2 clusters and validate their prospective to be efficient anticancer drug entities. (C) 2018 Elsevier B.V. All rights reserved.}, keywords = {Cu4O4 cubane complexes, Cytotoxicity, DFT, DNA binding, Magnetism, Nuclease activity}, issn = {0020-1693}, doi = {10.1016/j.ica.2017.12.039}, author = {Usman, Mohammad and Arjmand, Farukh and Khan, Rais Ahmad and Alsalme, Ali and Ahmad, Musheer and Sen Bishwas, Mousumi and Tabassum, Sartaj} } @article {46125, title = {Design, synthesis and biological evaluation of (E)-5-styryl-1,2,4-oxadiazoles as anti-tubercular agents}, journal = {Bioorganic Chemistry}, volume = {86}, year = {2019}, month = {MAY}, pages = {507-512}, type = {Article}, abstract = {

Cinnamic acid and its derivatives are known for anti-tubercular activity. The present study reports the synthesis of cinnamic acid derivatives via bioisosteric replacement of terminal carboxylic acid with {\textquoteleft}{\textquoteleft}oxadiazole{\textquoteright}{\textquoteright}. A series of cinnamic acid derivatives (styryl oxadiazoles) were designed and synthesized in good yields by reaction of substituted cinnamic acids (2, 15a-15s) with amidoximes. The synthesized styryl oxadiazoles were evaluated in vitro for anti-tubercular activity against Mycobacterium tuberculosis (Mtb) H37Ra strain. The structure-activity relationship (SAR) study has identified several compounds with mixed anti-tubercular profiles. The compound 32 displayed potent anti-tubercular activity (IC50= 0.045 mu g/mL). Molecular docking studies on mycobacterial enoyl-ACP reductase enzyme corroborated well with the experimental findings providing a platform for structure based hit-to-lead development.

}, keywords = {1, 2, 4-Oxadiazole, Anti-tubercular, Bioisosteres, Cinnamic acid, Molecular docking}, issn = {0045-2068}, doi = {10.1016/j.bioorg.2019.01.054}, author = {Upare, Abhay Atmaram and Gadekar, Pradip K. and Sivaramakrishnan, H. and Naik, Nishigandha and Khedkar, Vijay M. and Sarkar, Dhiman and Choudhari, Amit and Roopan, S. Mohana} } @article {47484, title = {Global study of MFS superfamily transporters in arabidopsis and grapes reveals their functional diversity in plants}, journal = {Plant Gene}, volume = {18}, year = {2019}, month = {JUN }, type = {Article}, abstract = {The Major Facilitator Superfamily (MFS) is the largest superfamily of secondary transporters present in all organisms, from prokaryotes to higher eukaryotes, that facilitates transport of diverse molecules like sugars, vitamins, amino-acids, hormones, etc. across cell membranes. The superfamily was further expanded to MFS Superfamily (MFSS) to integrate MFS with nine more families. The present study revealed their land plant specific diversity through identification across six species from unicellular alga to higher flowering plants. We identified 71, 131, 254, 260, 213 and 203 MFSS transporters in Chlamydomonas reinhardtii, Physcomitrella patens, Selaginella moellendorffii, Oryza sativa (var. Japonica), Arabidopsis thaliana and Vitis vinifera, respectively and classified them into MFSS families and subfamilies based on their transporter classification identifiers (TCIDs). Detailed analysis of 20 land plant specific subfamilies was conducted in A. thaliana and V. vinifera. Phylogenetic and gene duplication studies revealed the expansion of sugar porter and proton dependent oligopeptide transporter families in Arabidopsis and grape. The subcellular localization of the majority of the transporters was predicted to be in the plasma membrane. Furthermore, the microarray expression analysis of MFSS transporters from Arabidopsis and grapes revealed their multi-tissue-specificity and differential regulation under biotic and abiotic stress conditions. Studies of the transmembrane topology highlighted the presence of central cytoplasmic loop along with family specific topological variations that were evident from phylogenetic analysis. Overall, this study adds to the knowledge of functional and structural diversity and evolution of MFSS transporters in plants and opens the scope for detailed physiological and functional studies on these proteins.}, doi = {10.1016/j.plgene.2019.100179}, author = {Patil, Sucheta S. and Prashant, Ramya and Kadoo, Narendra Y. and Upadhyay, Anuradha and Gupta, Vidya S.} } @article {46229, title = {Glycation of glucose sensitive lysine residues K36, K438 and K549 of albumin is associated with prediabetes}, journal = {Journal of Proteomics}, year = {2019}, month = {AUG}, type = {Article}, abstract = {

Prediabetes is a risk factor for the development of diabetes. Early diagnosis of prediabetes may prevent the onset and progression of diabetes and its associated complications. Therefore, this study aimed at the identification of novel markers for efficient prediction of prediabetes. In this pursuit, we have evaluated the ability of glycated peptides of albumin in predicting prediabetes. Glycated peptides of in vitro glycated albumin were characterized by data dependent acquisition and parallel reaction monitoring using LC-HRMS. Amongst 14 glycated peptides characterized in vitro, four peptides, particularly, FK(CML)DLGEENFK, K(AML)VPQVSTPTLVEVSR, K(CML)VPQVSTPTLVEVSR, and K(AML)QTALVELVK, corresponding to 3 glucose sensitive lysine residues K36, K438, and K549, respectively showed significantly higher abundance in prediabetes than control. Additionally, the abundance of three of these peptides, namely K(AML)QTALVELVK, K(CML)VPQVSTPTLVEVSR and FK(CML)DLGEENFK was \>1.8-fold in prediabetes, which was significantly higher than the differences observed for FBG, PPG, and HbA1c. Further, the four glycated peptides showed a significant correlation with FBG, PPG, HbA1c, triglycerides, VLDL, and HDL. This study supports that glycated peptides of glucose sensitive lysine residues K36, K438 and K549 of albumin could be potentially useful markers for prediction of prediabetes. SIGNIFICANCE: Undiagnosed prediabetes may lead to diabetes and associated complications. This study reports targeted quantification of four glycated peptides particulary FK(CML)DLGEENFK, K(AML)VPQVSTPTLVEVSR, K(CML)VPQVSTPTLVEVSR, and K(AML)QTALVELVK, corresponding to 3 glucose sensitive lysine residues K36, K438 and K549 respectively by parallel reaction monitoring in healthy and prediabetic subjects. These peptides showed significantly higher abundance in prediabetes than healthy subjects, and showed significant correlation with various clinical parameters including FBG, PPG, HbA1c, and altered lipid profile. Therefore, together these four peptides constitute a panel of markers that can be useful for prediction of prediabetes.

}, doi = {10.1016/j.jprot.2019.103481}, author = {Rathore, R. and Sonwane, B. P. and Jagadeeshaprasad, M. G. and Kahar, S. and Santhakumari, B. and Unnikrishnan, A. G. and Kulkarni, Mahesh J.} } @article {46048, title = {Glycerol acetylation considering competing dimerization}, journal = {International Journal of Chemical Kinetics}, volume = {51}, year = {2019}, month = {AUG}, pages = {634-640}, type = {Editorial Material}, abstract = {

Glycerol acetylation is a very interesting reaction for studies of consecutive kinetics. In this short communication, we present a pseudo-homogeneous model for the synthesis of triacetyl glycerol from the reaction of glycerol and acetic acid over strongly acidic Amberlyst-15 and Amberlyst-70 catalysts, considering a dimerization of diacetyl glycerol (DAG) into diglycerol tetraacetate as a parallel reaction and compare the results with a model without side reactions. The best fits were obtained for apparent zeroth-order dimerization and first-order consecutive reactions in the presence of acetic acid in excess and with removal of water. An adaptation was made for DAG. The proposed model shows that the formation of DAG is faster than the consumption of glycerol, which could be an explanation for the occurrence of DAG dimerization instead of other parallel reactions in acetylation.

}, keywords = {apparent kinetics, diacetyl glycerol dimerization, glycerol acetylation}, issn = {0538-8066}, doi = {10.1002/kin.21282}, author = {Soares, Andre V. -H. and Kale, Sumeet S. and Armbruster, Udo and Passos, Fabio B. and Umbarkar, Shubhangi B. and Dongare, Mohan K. and Martin, Andreas} } @article {46160, title = {Hydrophobic WO3/SiO2 catalyst for the nitration of aromatics in liquid phase}, journal = {Applied Catalysis A-General}, volume = {574}, year = {2019}, month = {MAR}, pages = {105-113}, type = {Article}, abstract = {

WO3/SiO2 solid acid catalyst synthesized using sol gel method has shown promising activity (up to 65\% conversion) for aromatic nitration in liquid phase using commercial nitric acid (70\%) as nitrating agent without using any sulfuric acid. The water formed during the reaction as well as water from dilute nitric acid (70\%) was removed azeotropically, however due to the hydrophilic nature of the catalyst, some water gets strongly adsorbed on catalyst surface forming a barrier layer between catalyst and organics. This prevents effective adsorption of substrate on catalyst surface for its subsequent reaction. To improve the activity further, the hydrophilic/hydrophobic nature of the catalyst was altered by post modification by grafting with commercial short chain organosilane (Dynasylan 9896). The modified 20\% WO3/SiO2 catalyst when used for o-xylene nitration in liquid phase, showed significant increase in the conversion from 65\% to 80\% under identical reaction conditions. Catalyst characterization revealed decrease in the surface area of 20\% WO3/SiO2 from 356 m(2)/g to 302 m(2)/g after grafting with Dynasylan 9896. The fine dispersion of WO3 particles (2-5 run) on silica support was not affected due to modification. NMR and FTIR study revealed the decrease in surface hydroxyl groups imparting hydrophobicity to the catalyst. Interestingly the total acidic sites of the catalyst remained almost unaltered (0.54 mmol NH3/g) even after modification. Even though, the acidity and other characteristics of the catalyst did not change appreciably, there was a considerable increase in the o-xylene conversion which can be ascribed to the hydrophobic nature of the catalyst.

}, keywords = {Aromatic nitration, grafting, heterogeneous catalysis, Hydrophobic, Sol-gel synthesis}, issn = {0926-860X}, doi = {10.1016/j.apcata.2019.02.002}, author = {Kulal, A. B. and Kasabe, M. M. and Jadhav, P. V. and Dongare, M. K. and Umbarkar, S. B.} } @article {45537, title = {Improved efficiency of DSSC using combustion synthesized TiO2}, journal = {Materials Research Bulletin}, volume = {109}, year = {2019}, month = {JAN}, pages = {222-226}, type = {Article}, abstract = {

Combustion synthesis method is an economic, one step and an effective method for the synthesis of nanomaterials. In this work, titanium dioxide nanoparticles were synthesized by combustion method. The synthesized material was characterized by XRD, SEM and BET. Dye sensitized solar cell was fabricated using the synthesized material and its performance was compared with the solar cell fabricated using commercial TiO2. In order to evaluate the photovoltaic performance of DSSCs, photocurrent density to photovoltage (J-V) characteristic and electrochemical impedance spectroscopy (EIS) measurements were carried out. The DSSC fabricated using combustion synthesized and commercial TiO2 exhibited a power conversion efficiency of 6.11\% and 6.62\%, respectively. Combustion synthesized TiO2 which displayed similar efficiency to that of commercial material is least studied in the literature for solar cell applications.

}, keywords = {Combustion synthesis, Dye sensitized solar cell, TiO2}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2018.09.044}, author = {Umale, Sanjivani and Sudhakar, V. and Sontakke, Sharad M. and Krishnamoorthy, K. and Pandit, Aniruddha B.} } @article {45611, title = {Light-triggered, spatially localized chemistry by photoinduced electron transfer}, journal = {Angewandte Chemie-International Edition}, volume = {58}, year = {2019}, month = {FEB}, pages = {2715-2719}, type = {Article}, abstract = {

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross-linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.

}, doi = {10.1002/anie.201812700}, author = {Usgaonkar, S. and Deshmukh, S. and Biswas, B. and Karjule, N. and Yadav, P. and Nithyanandhan, J. and Kumaraswamy, G.} } @article {46438, title = {Pathways to defense metabolites and evading fruit bitterness in genus Solanum evolved through 2-oxoglutarate-dependent dioxygenases}, journal = {Nature Communications}, volume = {10}, year = {2019}, month = {NOV}, pages = {5169}, type = {Article}, abstract = {

The genus Solanum comprises three food crops (potato, tomato, and eggplant), which are consumed on daily basis worldwide and also producers of notorious anti-nutritional steroidal glycoalkaloids (SGAs). Hydroxylated SGAs (i.e. leptinines) serve as precursors for leptines that act as defenses against Colorado Potato Beetle (Leptinotarsa decemlineata Say), an important pest of potato worldwide. However, SGA hydroxylating enzymes remain unknown. Here, we discover that 2-OXOGLUTARATE-DEPENDENT-DIOXYGENASE (2-ODD) enzymes catalyze SGA-hydroxylation across various Solanum species. In contrast to cultivated potato, Solanum chacoense, a widespread wild potato species, has evolved a 2-ODD enzyme leading to the formation of leptinines. Furthermore, we find a related 2-ODD in tomato that catalyzes the hydroxylation of the bitter a-tomatine to hydroxytomatine, the first committed step in the chemical shift towards downstream ripening-associated non-bitter SGAs (e.g. esculeoside A). This 2-ODD enzyme prevents bitterness in ripe tomato fruit consumed today which otherwise would remain unpleasant in taste and more toxic.

}, issn = {2041-1723}, doi = {10.1038/s41467-019-13211-4}, author = {Cardenas, Pablo D. and Sonawane, Prashant D. and Heinig, Uwe and Jozwiak, Adam and Panda, Sayantan and Abebie, Bekele and Kazachkova, Yana and Pliner, Margarita and Unger, Tamar and Wolf, Dalia and Ofner, Itai and Vilaprinyo, Ester and Meir, Sagit and Davydov, Olga and Gal-On, Amit and Burdman, Saul and Giri, Ashok and Zamir, Dani and Scherf, Tali and Szymanski, Jedrzej and Rogachev, Ilana and Aharoni, Asaph} } @article {45569, title = {Rapid and greener method for utilization of plaster of paris (POP) waste generated from biomedical samples}, journal = {International Journal of Environmental Science and Technology}, volume = {16}, year = {2019}, month = {OCT}, pages = {2475-2480}, type = {Article}, abstract = {

Plaster of Paris (POP) is one of the recalcitrant wastes generated from dentistry and orthopaedic materials used in healthcare sector. The current practice of disposal of POP waste-harbouring biomedical material by incineration is very critical and environmentally unfriendly. The eco-friendly and rapid disintegration of such biomedical-related POP waste was done by treating with ammonium bicarbonate solution (20\% w/v ABC) to form non-hazardous products like ammonium sulphate and calcium carbonate in the form of sludge. The ammonium sulphate (NH4)2SO4 is generally used in agriculture as a chemical fertilizer and calcium carbonate (CaCO3) as an additive in construction sector making this process cost-effective and value addition. Interestingly, 20\% ABC solution also had significant antibiofilm, antimicrobial activity against fungi, yeast and bacterial strains probably due to its high pH-driven osmotic effect. Therefore, 20\% ABC solution finds dual eco-friendly application in disinfection of used POP, especially arising from biomedical waste from patients.

}, keywords = {Biomedical waste, Eco-friendly disintegration, Plaster of Paris waste}, issn = {1735-1472}, doi = {10.1007/s13762-018-2070-7}, author = {Navale, G.R. and Gohil, K.N. and Puppala, K.R. and Shinde, S.S. and Umbarkar, S. and Dharne, M.S.} } @article {46440, title = {Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {NOV}, pages = {36343-36350}, type = {Article}, abstract = {

The remnants of the anaerobic digestion process, {\textquoteleft}the digestate,{\textquoteright} mainly consist of fibrous lignin and cellulose like molecules, as a significant carbon repository along with some other inorganic impurities. The present work demonstrates the potential use of anaerobically treated fruit and vegetable waste (FVW) as a source of porous carbon for supercapacitor electrode materials. This work suggests that the FVW digestate can inherit silicon (Si) and calcium (Ca) based inorganic impurities, which play an essential role as structure directing agents for digestate derived carbon. These contaminants act as hard templates during carbonization to create hierarchical pores and contribute to an enhancement in surface area. Different batches from an anaerobic biogas digester plant are converted to porous carbon and examined as a potential supercapacitor electrode material. A maximum capacitance of 235 F g(-1) is achieved from DDHPC-4kh carbon with a specific surface area of 2502 m(2) g(-1) at a current density of 1 A g(-1) in an acidic aqueous electrolyte. The results are significant in comparison to other bio-sourced precursors studied previously.

}, doi = {10.1039/c9ra06603a}, author = {Chaturvedi, Vikash and Usangonvkar, Saurabh and Shelke, Manjusha V.} } @article {45627, title = {Utilization of waste biomass for the synthesis of functionalizable support for covalent anchoring of active organo catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {7}, year = {2019}, month = {JAN}, pages = {3018{\textendash}3026}, type = {Article}, abstract = {A single step synthetic procedure for carbon microspheres from agricultural waste residue (sugarcane bagasse) by low-temperature hydrothermal carbonization using oxalic acid as a hydrating/dehydrating agent is developed. The FTIR and XPS spectroscopy analysis indicates the presence of -OH, -COOH, and C=O functional groups on the surfaces of carbon spheres. These functional groups of the carbon spheres were utilized as a novel route to anchor 3-aminopropyl-triethoxysilane and 3-(2-aminoethylamino)propyl)-trimethoxysilane via condensation of triethoxy/trimethoxy silanes for the synthesis of organo base supported on carbon catalysts. The catalytic activity of the obtained supported organo-base catalyst was demonstrated for C{\textendash}C bond forming (Henry) reaction. Among all prepared catalysts, 3-(2-aminoethylaminopropyl)-trimethoxysilane grafted in toluene showed high conversion (up to 100\%) of aldehydes with excellent selectivity toward β-nitrostyrene. The catalyst was reused five times without losing significant activity for the same reaction.}, author = {Doke, D. S. and Advani, J. H. and Naikwadi, D. R. and Gawande, M. B. and Walke, P. and Umbarkar, S. B. and Biradar, A. V.} } @article {46230, title = {Vanadium-based highly active and selective catalysts for oxidative dehydrogenation of ethyl lactate to ethyl pyruvate}, journal = {Applied Catalysis A: General}, volume = {587}, year = {2019}, month = {SEP}, type = {Article}, abstract = {

Pyruvates are important intermediates for various bioactive and pharmaceutical molecules. Synthesis of pyruvates is challenging due to low selectivity, as the pyruvates are prone to polymerisation. In the present work, oxidative dehydrogenation of ethyl lactate to ethyl pyruvate was carried out under very mild conditions using vanadium-based homogeneous and heterogeneous catalysts in the presence of aqueous\ t-butyl hydroperoxide as an oxidant. Homogenous vanadium-based catalyst, VO(acac)2\ in acetonitrile solvent, gave excellent conversion (upto 83\%) with 100\% selectivity to ethyl pyruvate at room temperature. However, the heterogeneous catalyst, V2O5\ exhibited very high activity for oxidative dehydrogenation of ethyl lactate only at higher temperature (80 {\textdegree}C). At higher temperature, significant TBHP decomposition was observed if all TBHP was added in one lot. In case of ethyl lactate dehydrogenation using V2O5\ catalyst at 80 {\textdegree}C with two equivalents TBHP, 60\% ethyl lactate conversion with 100\% TBHP conversions were observed after 5 h when all TBHP was added initially in the reaction mixture. However, the ethyl lactate conversion at 80 {\textdegree}C, after 5 h increased to 72\% when the same amount of TBHP was added batch wise over a period of 4 h, indicating improved conversion of TBHP to ethyl pyruvate. The heterogeneous catalyst, V2O5\ exhibited up to 98\% conversion with 100\% ethyl pyruvate selectivity at 80 {\textdegree}C after 10 h with 3 equivalent TBHP added batch wise. The homogeneous catalyst could not be reused while V2O5\ could be successfully recycled five times without catalytic performances loss. Oxidation proceeds by radical mechanism, as proved by experiment with radical scavenger.

}, doi = {10.1016/j.apcata.2019.117246}, author = {Doke, Dhananjay and Khomane, Sonali B. and Pandhare, Swati and Dongare, Mohan K. and Dumeignil, Franck and Umbarkar, Shubhangi} } @article {45510, title = {What news in the surface chemistry of bulk and supported vanadia based SCR-catalysts: improvements in their resistance to poisoning and thermal sintering}, journal = {Chemical Record}, volume = {19}, year = {2019}, month = {OCT}, pages = {1813-1828}, type = {Article}, abstract = {

This paper reports a short review on the impact of poisoning effects and thermal aging on the reactivity of surface vanadate species on benchmark V2O5-WO3/TiO2 Selective-Catalytic-Reduction catalysts. A renewed interest of this SCR technology is related to its diversification notably as after-treatment systems to treat the exhaust from Diesel engines with higher running temperature especially when SCR catalysts are coated on Diesel Particulates Filters. Particular attention is also paid to poisoning effects in conjunction with the progressive replacement of fossil fuels by bio-fuels containing alkaline contaminants which drastically deactivate the catalyst through neutralization of strong acid sites. Most of the investigations show that better insight into the mechanisms of poisoning and aging processes is needed especially to understand the relative sensibility of various vanadate species. This could provide original guidelines to catalyst preparation and or the developments of more stable bulk systems as exemplified.

}, doi = {10.1002/tcr.201800092}, author = {Granger, P. and Siaka, H.W. and Umbarkar, S.B.} } @article {46325, title = {Whole proteome analysis of GA(3) response at panicle stage in Grape (Vitis vinifera) CV. Thompson seedless}, journal = {Journal of Plant Growth Regulation}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

Rachis elongation is a crucial process in producing good quality table grapes. In compact clustered grape variety like Thompson Seedless, treating the flower panicles with a mild dose of GA(3) results in loose clusters. We sprayed GA(3) on Thompson Seedless panicles immediately after emergence, and the samples were collected at 6 h and 24 h after application. Whole proteome analysis revealed significant differential expression of 530 proteins of the total 1288 expressed proteins at two time-points. GO term enrichment analysis revealed enrichment of GO terms related to translation, biosynthetic processes, and photosynthesis in GA(3)-treated samples. As the process of rachis elongation requires enhanced carbon metabolism and accumulation of sugars through the expansion of phloem area, we attribute this to the overexpression of several proteins involved in these processes. Significantly highly expressed proteins also belonged to biological processes like the generation of precursor metabolites, cellular protein metabolic processes, response to abiotic stimulus, and protein metabolic processes. This study might be the first of its kind in deciphering the contribution of a different group of proteins during rachis elongation as an early response to GA(3) application in seedless grapes. These results provide quality information on various physiological and biochemical changes occurring during early stages of rachis elongation.

}, keywords = {Bunch architecture, Gibberellic acid, Proteome, Rachis elongation, Vitis vinifera}, issn = {0721-7595}, doi = {10.1007/s00344-019-10041-y}, author = {Maske, Smita and Upadhyay, Anuradha and Jogaiha, Satisha and Patil, Sucheta S. and Kadoo, Narendra Y. and Gupta, Vidya S.} } @inbook {47323, title = {Advances in single-atom catalysts for lignin conversion}, booktitle = {Advanced Heterogeneous Catalysts Volume 2: Applications at the Single-Atom Scale }, volume = {1360}, year = {2020}, pages = {93-125}, publisher = {ACS }, organization = {ACS }, abstract = {

Single-atom catalysts (SACs) have drawn significant attention as promising surfaces for promoting observable reaction processes. As a guideline, SACs should have the proper nanoscale dimensionality to influence their effective and efficient performance, especially during lignin conversion to platform chemicals and other useful products. The development of SACs for functional applications still has many difficulties, such as harnessing and improving low-coordinated metal atoms to have controlled and observable activities per metal atom. Consequently, the need arises to ensure a decrease in the size of the metal particles and their uniform dispersion or coordination on a suitable support material. This has been an industrial target for a long time in the field of catalysis. Supported metal-based catalysts are not dimensionally uniform, thereby reducing their metal-atom efficiency and frequently leading to undesired side reactions that are sometimes difficult to observe. This makes the identification of the active sites responsible for the reaction of interest very difficult or even impossible. To ameliorate this challenge, the ultimate small-size limit for a metal particle is the SAC, which contains isolated metal atoms singly dispersed on any suitable support materials. It is expected that SACs should maximize the metal-atom efficiency with respect to the application, which is particularly significant for supported metal catalysts. Moreover, through uniform single-atom dispersion, SACs offer a great opportunity for achieving high activity and tuning selectivity to the desired product. This chapter provides a comprehensive overview of recent advances in using SACs for the conversion of lignin or lignin model compounds. The different support materials used for SACs, such as zeolites, metal oxides, and carbonaceous and siliceous materials, are discussed. This contribution also covers the catalytic reactions of lignin with an emphasis on cleaving its specific linkages, along with a systematic evaluation of SACs used in the relevant processes. The chapter also addressed key parameters essential for tailoring the particle size and acid{\textendash}base and redox properties of the SACs used in lignin conversion. Special attention is paid to understanding the role of synthesis conditions in tailoring the size of SACs. It is expected that this contribution will provide future directions for practical SAC development and implementation in lignin conversion.

}, doi = {10.1021/bk-2020-1360.ch005}, author = {Halilu, Ahmed and Umar, Ahmad Abulfathi and Balarabe, Yahaya Umar and Haniffa, Mhd. Abd. Cader Mhd. and Munawar, Khadija and Sunku, Kiran and Sudarsanam, Putla} } @article {46728, title = {Bifunctional rice husk-derived SiO2-Cu-Al-Mg nanohybrid catalyst for one-pot conversion of biomass-derived furfural to furfuryl acetate}, journal = {Fuel}, volume = {275}, year = {2020}, month = {SEP }, pages = {117953}, type = {Article}, abstract = {

Developing one-pot reaction methodologies, which typically require multifunctional catalyst systems, is crucial for sustainable production of bio-derived fuels and chemicals. This work reports one-pot hydrogenation-esterification of furfural to furfuryl acetate using a bifunctional metal-based nanohybrid catalyst, composed of rice husk (RH) derived SiO2, Cu, Al, and Mg species (RHSiO2-Cu-Al-Mg). For comparison, the catalytic efficiency of RHSiO2-Cu and RHSiO2-Cu-Al were tested under similar reaction conditions. Various analytical techniques were used to elucidate the physicochemical, textural, and acid-redox properties of the catalysts. It was found that the RHSiO2-Cu-Al-Mg catalyst contains an optimum amount of acid and redox sites, as illustrated by NH3-TPD and H-2-TPR studies, respectively. Especially, Mg addition played a vital role in tailoring acidity of the RHSiO2-Cu-Al catalyst to promote in-situ esterification of furfuryl alcohol with acetic acid to yield furfuryl acetate. As a result, the RHSiO2-Cu-Al-Mg catalyst exhibited the best performance in one-pot conversion of furfural to furfuryl acetate, outperforming various noble metal/silica based catalysts. This study offers potential opportunities for the rational design of novel, bifunctional heterogeneous catalysts for efficient production of bio-derived fuels and value added chemicals.

}, keywords = {Acid-redox sites, Bifunctional catalyst, Bio-oil upgrading, One-pot furfural conversion, Rice husk silica}, issn = {0016-2361}, doi = {10.1016/j.fuel.2020.117953}, author = {Hashim, Luqman H. and Halilu, Ahmed and Sudarsanam, Putla and Umar, Yahaya Balarabe and Bin Johan, Mohd Rafie and Bhargava, Suresh K.} } @article {46685, title = {CD44, a predominant protein in methylglyoxal-induced secretome of muscle cells, is elevated in diabetic plasma}, journal = {ACS Omega}, volume = {5}, year = {2020}, month = {OCT }, pages = {25016-25028}, type = {Article}, abstract = {

Methylglyoxal (MG), a glycolytic intermediate and reactive dicarbonyl, is responsible for exacerbation of insulin resistance and diabetic complication. In this study, NIG-induced secretome of rat muscle cells was identified and relatively quantified by SWATH-MS. A total of 643 proteins were identified in MG induced{\textquoteright} secretome, of which 82 proteins were upregulated and 99 proteins were downregulated by more than 1.3-fold in SWATH analysis. Further, secretory proteins from the dassical secretory pathway and nonclassical secretory pathway were identified using SignalP and SecretomeP, respectively. A total of 180 proteins were identified with SignalP, and 113 proteins were identified with SecretomeP. The differentially expressed proteins were functionallyannotated by KEGG pathway analysis using Cytoscape soft ware with plugin clusterMaker. The differentially expressed proteins were{\textquoteright}sfound to he involved m various pathways like extracellular matrix (ECM) receptor interaction, leukocyte transendothelial migration, fluid shear tress and atherosclerosis, complement and coagulation cascades, and lysosomal pathway. Since the MG levels are high in diabetic conditions, the presence of MG-induced isecreted proteins was inspected {\textquoteleft}by profiling human plasma of healthy and diabetic subjects (n = 10 each). CD44, a predominant MG -induced secreted protein, was found to be elevated in the diabetic plasma and to have a role in the development of insulin resistance.

}, issn = {2470-1343}, doi = {10.1021/acsomega.0c01318}, author = {Bai, Shakuntala and Chaurasiya, Arvindkumar H. and Banarjee, Reema and Walke, Prachi B. and Rashid, Faraz and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @article {46979, title = {Comparative proteomics unravels the differences in salt stress response of own-rooted and 110R-grafted thompson seedless grapevines}, journal = {Journal of Proteome Research}, volume = {19}, year = {2020}, month = {FEB}, pages = {583-599}, type = {Article}, abstract = {

Thompson Seedless, a commonly grown table grape variety, is sensitive to salinity when grown on its own roots, and therefore, it is frequently grafted onto salinity-tolerant wild grapevine rootstocks. Rising soil salinity is a growing concern in irrigated agricultural systems. The accumulation of salts near the root zone severely hampers plant growth, leading to a decrease in the productive lifespan of grapevine and causing heavy yield losses to the farmer. In the present study, we investigated the differences in response to salinity between own-rooted Thompson Seedless (TSOR) and 110R-grafted Thompson Seedless (TS110R) grapevines, wherein 110R is reported to be a salt-tolerant rootstock. The grapevines were subjected to salt stress by treating them with a 150 mM NaCl solution. The stress-induced changes in protein abundance were investigated using a label-free shotgun proteomics approach at three time points viz. 6 h, 48 h, and 7 days of salt treatment. A total of 2793 proteins were identified, of which 246 were differentially abundant at various time-points in TSOR and TS110R vines. The abundance of proteins involved in several biological processes such as photosynthesis, amino acid metabolism, translation, chlorophyll biosynthesis, and generation of precursor metabolites was significantly affected by salt stress in both the vines but at different stages of stress. The results revealed that TSOR vines responded fervently to salt stress, while TS110R vines adopted a preventive approach. The findings of this study add to the knowledge of salinity response in woody and grafted plants and hence open the scope for further studies on salt stress-specific differences induced by grafting.

}, keywords = {110R rootstock, gene ontology, grafting, label-free proteomics, salt stress, Vitis vinifera}, issn = {1535-3893}, doi = {10.1021/acs.jproteome.9b00420}, author = {Patil, Sucheta and Shinde, Manisha and Prashant, Ramya and Kadoo, Narendra and Upadhyay, Anuradha and Gupta, Vidya} } @article {46867, title = {Connecting microscopic structures, mesoscale assemblies, and macroscopic architectures in 3D-printed hierarchical porous covalent organic framework foams}, journal = {Journal of the American Chemical Society}, volume = {142}, year = {2020}, month = {MAY }, pages = {8252-8261}, type = {Article}, abstract = {

The induction of macro and mesopores into two-dimensional porous covalent organic frameworks (COFs) could enhance the exposure of the intrinsic micropores toward the pollutant environment, thereby, improving the performance. However, the challenge is to build a continuous hierarchically porous macro-architecture of crystalline organic materials in the bulk scale. In this regard, we have strategized a novel synthetic method to create hierarchically porous COF foams consisting of ordered micropores (2-2.2 nm) and disordered meso and macropores (50 nm to 200 mu m) as well as ordered macropores (1.5 mm to 2 cm). Herein, graphene oxide was used for creating disordered macro and mesopores in COF-GO foams. Considering the rheological features of the precursor hydrogel, we could integrate crystalline and porous COF-GO foams into self-supported three-dimensional (3D)-printed objects with the desired shapes and sizes. Therefore, we have engineered the 3D macro-architecture of COF-GO foams into complex geometries keeping their structural order and continuous porosity intact over a range of more than a million (10(-9) m to 10(-3) m). The interconnected 3D openings in these COF-GO foams further enhance the rapid and efficient uptake of organic and inorganic pollutants from water (\>95\% removal within 30 s). The abundant distribution of interconnected macroporous volume (55\%) throughout the COF-GO foam matrix enhances the flow of water (1.13 x 10(-3) m.s(-1)) which results in efficient mass transport and adsorption.

}, issn = {0002-7863}, doi = {10.1021/jacs.0c00555}, author = {Mohammed, Abdul Khayum and Usgaonkar, Saurabh and Kanheerampockil, Fayis and Karak, Suvendu and Halder, Arjun and Tharkar, Minakshi and Addicoat, Matthew and Ajithkumar, Thalasseril G. and Banerjee, Rahul} } @article {47009, title = {Development of multiple reaction monitoring assay for quantification of carnosine in human plasma}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JAN }, pages = {763-769}, type = {Article}, abstract = {

Carnosine, a histidine containing dipeptide, exerts beneficial effects by scavenging reactive carbonyl compounds (RCCs) that are implicated in pathogenesis of diabetes. However, the reduced carnosine levels may aggravate the severity of diabetes. The precise quantification of carnosine levels may serve as an indicator of pathophysiological state of diabetes. Therefore, we have developed a highly sensitive targeted multiple reaction monitoring (MRM) method for quantification of carnosine in human plasma samples. Various mass spectrometry parameters such as ionization of precursor, fragment abundance and stability, collision energy, tube lens offset voltage were optimized to develop a sensitive and robust assay. Using the optimized MRM assay, the lower limit of detection (LOD) and limit of quantification (LOQ) for carnosine were found to be 0.4 nM and 1.0 nM respectively. Standard curves were constructed ranging from 1.0 nM to 15.0 mu M and the levels of carnosine in mice and human plasma were determined. Further, the MRM assay was extended to study carnosine hydrolyzing activity of human carnosinases, the serum carnosinase (CN1) and the cytosolic carnosinase (CN2). CN1 showed three folds higher activity than CN2. The MRM assay developed in this study is highly sensitive and can be used for basal plasma carnosine quantification, which can be developed as a novel marker for scavenging of RCCs in diabetes.

}, doi = {10.1039/c9ra08532g}, author = {Pandya, Vaibhav Kumar and Sonwane, Babasaheb and Rathore, Rajeshwari and Unnikrishnan, A. G. and Kumaran, Sangaralingam and Kulkarni, Mahesh J.} } @article {46989, title = {Enzymatic and non-enzymatic detoxification of reactive carbonyl compounds improves the oxidative stress tolerance in cucumber, tobacco and rice seedlings}, journal = {Journal of Plant Growth Regulation}, volume = {39}, year = {2020}, month = {SEP}, pages = {1359-1372}, type = {Article}, abstract = {

Detoxification of reactive carbonyl compounds (RCC) is crucial to sustain cellular activity to improve plant growth and development. Seedling growth is highly affected by accumulation of RCC under stress. We report non-enzymatic, enzymatic mechanisms of detoxification of RCC in the cucumber, tobacco and rice seedling systems exposed to glucose, NaCl, methyl viologen (MV) induced oxidative stress. The cucumber seedlings exposed to carbonyl stress had higher levels of malondialdehyde (MDA), protein carbonyls (PCs) and advanced glycation end-product N-carboxymethyl-lysine (AGE-CML) that negatively affected the seedling growth. The overexpression of enzyme encoding aldo-keto reductase-1 (AKR1) in tobacco and rice showed detoxification of RCC, MDA and methylglyoxal (MG) with improved seedling growth under glucose, NaCl and MV-induced oxidative stress. Further, small molecules like acetylsalicylic acid (ASA), aminoguanidine (AG), carnosine (Car), curcumin (Cur) and pyridoxamine (PM) showed detoxification of RCC non-enzymatically and rescued the cucumber seedling growth from glucose, NaCl and MV-stress. In autotrophically grown rice seedlings these molecules substantially improved seedling growth under MV-induced oxidative stress. Seedlings treated with the small molecules sustained higher guaiacol peroxidase (GPX) enzyme activity signifying the role of small molecules in reducing carbonyl stress-induced protein inactivation and AGE-CML protein modifications. The results showed that besides enzymatic detoxification of RCC, the small molecules also could reduce cytotoxic effect of RCC under stress. The study demonstrates that small molecules are attractive compounds to improve the seedling growth under stress conditions.

}, keywords = {Oxidative stress, plant growth, Reactive carbonyl scavengers, Seed germination, small molecules}, issn = {0721-7595}, doi = {10.1007/s00344-020-10072-w, Early Access Date = JAN 2020}, author = {Nareshkumar, Ambekar and Subbarao, Sindhu and Vennapusa, Amarnatha Reddy and Ashwin, Vargheese and Banarjee, Reema and Kulkarni, Mahesh J. and Ramu, Vemanna S. and Udayakumar, Makarla} } @article {46722, title = {Functionalized single-walled carbon nanohorns to reinforce sulfonated poly(ether ether ketone) electrolyte for direct methanol fuel cells}, journal = {ChemElectroChem}, volume = {7}, year = {2020}, month = {SEP }, pages = {3632-3636}, type = {Article}, abstract = {

Carbon-nanomaterial-based additives are promising materials for improving the physicochemical properties of sulfonated polyether ether ketone (sPEEK) for its use as composite membrane electrolyte in direct methanol fuel cells (DMFCs). In this work, functionalized single-wall carbon nanohorns (f-SWNHs) are realized as an additive in sPEEK. The -COOH groups created on the SWNHs during peroxide treatment improve the dispersion of f-SWNHs in sPEEK and boost the proton conductivity, ion exchange capacity, mechanical properties and reduce the methanol permeability of the electrolyte. The composite membrane with 0.50 wt.\% f-SWNHs shows improved electrochemical selectivity of 17.03x10(-4) Scm(-3)s and delivers the highest peak power density of 230 mW cm(-2)in DMFCs.

}, keywords = {carbon nanohorns, direct methanol fuel cells, membrane electrolyte, proton conductivity, sulfonated poly ether ether ketone}, issn = {2196-0216}, doi = {10.1002/celc.202000866}, author = {Turanelloormana, Parameswaran and Sarmah, Sudeshna and Torris, Arun and Bhat, Santoshkumar D. and Unni, SreeKuttan M.} } @article {46918, title = {Microstructure and yielding of capillary force induced gel}, journal = {Rheologica Acta}, volume = {59}, year = {2020}, month = {MAY}, pages = {291-306}, type = {Article}, abstract = {

We have investigated the rheology and structure of a gel formed from a mixture of non-Brownian particles and two immiscible liquids. The suspension of particles in a liquid undergoes gelation upon the addition of a small content of second, wetting liquid which forms liquid bridges between particles leading to a sample spanning network. The rheology of this gel primarily exhibits a yield stress at low shear rates followed by a linear variation of shear stress at high shear rates. The apparent yield stress extracted from the flow curves increases rapidly with volume fraction of the second liquid before saturation, while it exhibits a monotonic increase with increasing particle concentration. Rescaling of the yield stress curves using suitable shift factors results in an empirical expression for the yield stress showing squared dependence on liquid fraction and a rapid increase with particle fraction above a certain value, both combined in a highly non-linear manner. The microstructural variations with changing secondary liquid content and particle fractions are captured using three-dimensional X-ray tomography technique. The microstructure is observed to show increased local compactness with increased liquid content and increased spatial homogeneity with increased particle fractions. The images from X-ray tomography are analysed to obtain the distributions of particle-particle bonds (coordination number) in the system which serve to explain the observed yield stress behaviour in a qualitative manner.

}, keywords = {Capillary force, Flow curve, gel, Microstructure, Rheology, Yield stress}, issn = {0035-4511}, doi = {10.1007/s00397-020-01189-6, Early Access Date = MAR 2020}, author = {Huprikar, Sameer and Usgaonkar, Saurabh and Lele, Ashish K. and Orpe, Ashish V.} } @article {47010, title = {Ovalbumin-mediated synthesis and simultaneous functionalization of graphene with increased protein stability}, journal = {Green Chemistry Letters and Reviews}, volume = {13}, year = {2020}, month = {JAN }, pages = {60-67}, type = {Article}, abstract = {

In this article, we have shown an easy, one-step, protein-directed approach for the synthesis of water-soluble and functional graphene using ovalbumin. The obtained ovalbumin functionalized graphene was characterized by UV-visible spectroscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared spectroscopy. Atomic force microscopy was used to check the attachment/functionalization of ovalbumin on grapheme sheets. It was shown that the functionalization of ovalbumin on grapheme sheets makes the protein more thermally stable compare to free ovalbumin, which has been shown by using sodium dodecyl sulfate polyacrylamide gel electrophoresis.

}, keywords = {Atomic force microscopy, graphene, graphene oxide, Ovalbumin, SDS-PAGE, thermal degradation}, issn = {1751-8253}, doi = {10.1080/17518253.2020.1725150}, author = {Ullah, Riaz and Khan, Shadab Ali and Aladresi, Aref Ali Mohammed and Alharbi, Sulaiman Ali and Chinnathambi, Arunachalam} } @article {46990, title = {Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors (vol 9, pg 36343, 2019)}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JAN}, pages = {3991}, type = {Correction}, abstract = {

Correction for {\textquoteleft}Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors{\textquoteright} by Vikash Chaturvedi et al., RSC Adv., 2019, 9, 36343-36350.

}, doi = {10.1039/d0ra90003f}, author = {Chaturvedi, Vikash and Usgaonkar, Saurabh and Shelke, Manjusha V.} } @article {46795, title = {Total synthesis of (-)-2-methoxy-2-butenolide-3-cinnamate and its antimicrobial potentials}, journal = {Natural Product Research}, year = {2020}, month = {JUL}, type = {Article; Early Access 2020}, abstract = {

The first total synthesis of (-)-2-methoxy-2-butenolide-3-cinnamate (butenolide cinnamate) was achieved using commercially available starting material. The synthesized compound was found to have promising antibacterial activity against Gram-negative strainsEscherichia coli(ATCC 8739),Salmonella typhimurium(ATCC 23564) andPseudomonas aeruginosa(ATCC 19154) with a minimum inhibitory concentration of 2.0 mu g/mL, 1.0 mu g/mL and 2.0 mu g/mL, respectively. Notably, the compound was more potent against Gram-negative test strains than the Gram-positive test strains.

}, keywords = {antibacterial activity, butenolide cinnamate, Total synthesis}, issn = {1478-6419}, doi = {10.1080/14786419.2020.1789979, Early Access Date = JUL 2020}, author = {Said, Madhukar S. and Udavant, Rohini and Sahu, Amit Kumar and Khan, Abujunaid and Nayak, Rashmi and Dastager, Syed G. and Kumar, Pradeep and Gajbhiye, Jayant} } @article {47069, title = {Baicalein inhibits heparin-induced Tau aggregation by initializing non-toxic Tau oligomer formation}, journal = {Cell Communication and Signaling}, volume = {19}, year = {2021}, month = {FEB }, pages = {16}, type = {Article}, abstract = {

Background: Amyloid aggregate deposition is the key feature of Alzheimer{\textquoteright}s disease. The proteinaceous aggregates found in the afflicted brain are the intra-neuronal neurofibrillary tangles formed by the microtubule-associated protein Tau and extracellular deposits, senile plaques, of amyloid beta (A beta) peptide proteolytically derived from the amyloid precursor protein. Accumulation of these aggregates has manifestations in the later stages of the disease, such as memory loss and cognitive inabilities originating from the neuronal dysfunction, neurodegeneration, and brain atrophy. Treatment of this disease at the late stages is difficult, and many clinical trials have failed. Hence, the goal is to find means capable of preventing the aggregation of these intrinsically disordered proteins by inhibiting the early stages of their pathological transformations. Polyphenols are known to be neuroprotective agents with the noticeable potential against many neurodegenerative diseases, such as Alzheimer{\textquoteright}s, Parkinson{\textquoteright}s, and Prion diseases. Methods: We analyzed the capability of Baicalein to inhibit aggregation of human Tau protein by a multifactorial analysis that included several biophysical and biochemical techniques. Results: The potency of Baicalein, a polyphenol from the Scutellaria baicalensis Georgi, against in vitro Tau aggregation and PHF dissolution has been screened and validated. ThS fluorescence assay revealed the potent inhibitory activity of Baicalein, whereas ANS revealed its mechanism of Tau inhibition viz. by oligomer capture and dissociation. In addition, Baicalein dissolved the preformed mature fibrils of Tau thereby possessing a dual target action. Tau oligomers formed by Baicalein were non-toxic to neuronal cells, highlighting its role as a potent molecule to be screened against AD. Conclusion: In conclusion, Baicalein inhibits aggregation of hTau40 by enhancing the formation of SDS-stable oligomers and preventing fibril formation. Baicalein-induced oligomers do not affect the viability of the neuroblastoma cells. Therefore, Baicalein can be considered as a lead molecule against Tau pathology in AD.

}, keywords = {Alzheimer{\textquoteright}s disease, Baicalein, Tau dissolution, Tau inhibition, Tau Oligomers}, doi = {10.1186/s12964-021-00704-3}, author = {Sonawane, Shweta Kishor and Uversky, Vladimir N. and Chinnathambi, Subashchandrabose} } @article {47373, title = {Chronic systemic exposure to IL6 leads to deregulation of glycolysis and fat accumulation in the zebrafish liver}, journal = {Biochimica ET Biophysica Acta-Molecular and Cell Biology of Lipids}, volume = {1866}, year = {2021}, month = {MAY}, pages = {158905}, type = {Article}, abstract = {

Inflammation is a constant in Non-Alcoholic Fatty Liver Disease (NAFLD), although their relationship is unclear. In a transgenic zebrafish system with chronic systemic overexpression of human IL6 (IL6-OE) we show that inflammation can cause intra-hepatic accumulation of triglycerides. Transcriptomics and proteomics analysis of the IL6-OE liver revealed a deregulation of glycolysis/gluconeogenesis pathway, especially a striking down regulation of the glycolytic enzyme aldolase b. Metabolomics analysis by mass spectrometry showed accumulation of hexose monophosphates and their derivatives, which can act as precursors for triglyceride synthesis. Our results suggest that IL6-driven repression of glycolysis/gluconeogenesis, specifically aldolase b, may be a novel mechanism for fatty liver. This mechanism may be relevant for NAFLD in lean individuals, an emerging class of NAFLD prevalent more in Asian Indian populations.

}, keywords = {Aldolase b, DHAP, Inflammation, Interleukin 6, Lean NAFLD, Non-alcoholic fatty liver}, issn = {1388-1981}, doi = {10.1016/j.bbalip.2021.158905}, author = {Singh, Manoj K. and Jayarajan, Rijith and Varshney, Swati and Upadrasta, Sindhuri and Singh, Archana and Yadav, Rajni and Scaria, Vinod and Sengupta, Shantanu and Shanmugam, Dhanasekaran and Shalimar and Sivasubbu, Sridhar and Gandotra, Sheetal and Sachidanandan, Chetana} } @article {47500, title = {Conserved RNA binding activity of phosphatidyl inositol 5-phosphate 4-kinase (PIP4K2A)}, journal = {Frontiers in Molecular Biosciences}, volume = {8}, year = {2021}, month = {MAY}, pages = {631281}, type = {Article}, abstract = {Plasmodium falciparum is a causative agent for malaria and has a complex life cycle in human and mosquito hosts. During its life cycle, the malarial parasite Plasmodium goes through different asexual and sexual stages, in humans and mosquitoes. Expression of stage-specific proteins is important for successful completion of its life cycle and requires tight gene regulation. In the case of Plasmodium, due to relative paucity of the transcription factors, it is postulated that posttranscriptional regulation plays an important role in stage-specific gene expression. Translation repression of specific set of mRNA has been reported in gametocyte stages of the parasite. A conserved element present in the 3 {\textquoteleft} UTR of some of these transcripts was identified. Phosphatidylinositol 5-phosphate 4-kinase (PIP4K2A) was identified as the protein that associates with these RNA. We now show that the RNA binding activity of PIP4K2A is independent of its kinase activity. We also observe that PIP4K2A is imported into the parasite from the host on Plasmodium berghei and Toxoplasma gondii. The RNA binding activity of PIP4K2A seems to be conserved across species from Drosophila and C. elegans to humans, suggesting that the RNA binding activity of PIP4K may be important, and there may be host transcripts that may be regulated by PIP4K2A. These results identify a novel RNA binding role for PIP4K2A that may not only play a role in Plasmodium propagation but may also function in regulating gene expression in multicellular organisms.}, keywords = {malaria, posttranscriptional gene regulation, RNA-protein interaction, translation regulation}, doi = {10.3389/fmolb.2021.631281}, author = {Behari, Jatin and Borkar, Pranita and Vindu, Arya and Dandewad, Vishal and Upadrasta, Sindhuri and Shanmugam, Dhanasekaran and Seshadri, Vasudevan} } @article {47410, title = {Direct synthesis of mesoporous siliceous phosphotungstic acid and its superior catalytic activity on the cyclohexylation of phenol}, journal = {Journal of Physical Chemistry C }, volume = {125}, year = {2021}, month = {APR }, pages = {6723-6734}, type = {Article}, abstract = {

The synthesis of highly active and reusable mesoporous siliceous phosphotungstic acid materials (mPTA-Si) which are prepared through a simple self-assembly between phosphotungstic acid (PTA), the polymeric surfactant, and the silica precursor assisted by KCl for cyclohexylation of phenol is reported. The surface area and the acidity of these materials are tuned with a simple adjustment of PTA in the silica framework. The prepared samples exhibit mesoporous structure with a high surface area, but the structure is collapsed when the loading of PTA is high. It is established that the Keggin structure of PTA is retained on the final mPTA-Si. mPTA-Si with different loadings of PTA are employed as the catalysts for the cyclohexylation of phenol under liquid phase conditions. Among the catalysts studied, 10.0-mPTA-8.3Si calcined at 350 degrees C is found to be highly active, selective, and recyclable and offers 100\% conversion of phenol with the highest selectivity for p-cyclohexylphenol (96.8\%).

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.1c01596}, author = {Ilbeygi, Hamid and Sawant, Dhanashri P. and Ruban, Sujanya M. and Reshma, Kokane S. and Umbarkar, Shubhangi B. and Halligudi, Shivappa B. and Vinu, Ajayan} } @article {47802, title = {Gibberellic acid induces unique molecular responses in {\textquoteleft}thompson seedless{\textquoteright} grapes as revealed by non-targeted metabolomics}, journal = {Journal of Plant Growth Regulation}, volume = {40}, year = {2021}, month = {FEB}, pages = {293 - 304}, type = {Article}, abstract = {Compact clusters and small berry size are the major problems associated with the commercialization of table grapes. The application of gibberellic acid 3 (GA3) has been a long-followed practice to overcome these issues. To analyze the molecular response of {\textquoteleft}Thompson Seedless{\textquoteright} grapes to GA3 treatment, we investigated the metabolomes of its rachises, clusters, and berries, 6~h and 24~h after the treatment. Metabolite profiling using non-targeted metabolomics approach revealed several metabolites, including arginine, proline, tyrosine, kaempferol, resveratrol, catechin, and so on as possible biomarkers of GA3 treatment in grapes. GA3 treatment greatly impacted the alanine, aspartate, and glutamate metabolism pathways, and the GA3-mediated alterations in the levels of certain plant growth regulators and primary metabolites were in accordance with important growth and developmental processes in grapes. This study highlights the effect of GA3 on the profiles of certain polyphenols impacting the flavone and flavonol biosynthesis pathways and hence the nutritional aspect of grapes. The results of this study would be useful to develop self-elongating varieties simplifying the grape cultivation.}, isbn = {1435-8107}, doi = {10.1007/s00344-020-10102-7}, author = {Jadhav, Uma and Mundhe, Swapnil and Kumar, Yashwant and Jogaiah, Satisha and Upadhyay, Anuradha and Gupta, Vidya S. and Kadoo, Narendra Y.} } @article {46917, title = {Gibberellic acid induces unique molecular responses in {\textquoteleft}thompson seedless{\textquoteright} grapes as revealed by non-targeted metabolomics}, journal = {Journal of Plant Growth Regulation}, volume = {40}, year = {2021}, month = {FEB}, pages = {293-304}, type = {Article}, abstract = {

Compact clusters and small berry size are the major problems associated with the commercialization of table grapes. The application of gibberellic acid 3 (GA(3)) has been a long-followed practice to overcome these issues. To analyze the molecular response of {\textquoteleft}Thompson Seedless{\textquoteright} grapes to GA(3) treatment, we investigated the metabolomes of its rachises, clusters, and berries, 6 h and 24 h after the treatment. Metabolite profiling using non-targeted metabolomics approach revealed several metabolites, including arginine, proline, tyrosine, kaempferol, resveratrol, catechin, and so on as possible biomarkers of GA(3) treatment in grapes. GA(3) treatment greatly impacted the alanine, aspartate, and glutamate metabolism pathways, and the GA(3)-mediated alterations in the levels of certain plant growth regulators and primary metabolites were in accordance with important growth and developmental processes in grapes. This study highlights the effect of GA(3) on the profiles of certain polyphenols impacting the flavone and flavonol biosynthesis pathways and hence the nutritional aspect of grapes. The results of this study would be useful to develop self-elongating varieties simplifying the grape cultivation.

}, keywords = {Biosynthetic pathways, GA(3) response, GA(3) signaling, Sultana grapes, Untargeted metabolomics}, issn = {0721-7595}, doi = {10.1007/s00344-020-10102-7, Early Access Date = MAR 2020}, author = {Jadhav, Uma and Mundhe, Swapnil and Kumar, Yashwant and Jogaiah, Satisha and Upadhyay, Anuradha and Gupta, Vidya S. and Kadoo, Narendra Y.} } @article {47390, title = {Insights from a pan India Sero-epidemiological survey (Phenome-India Cohort) for SARS-CoV2}, journal = {eLife}, volume = {10}, year = {2021}, month = {APR }, pages = {e66537}, type = {Article}, abstract = {

To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14\%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95\% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10\% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95\% confidence interval, p value: 2.23, 1.92-2.59, \<0.0001), use of public transport (1.79, 1.43-2.24, \<0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, \<0.0001), and B blood group (1.36, 1.15-1.61, 0.001).

}, issn = {2050-084X}, doi = {10.7554/eLife.66537}, author = {Naushin, Salwa and Sardana, Viren and Ujjainiya, Rajat and Bhatheja, Nitin and Kutum, Rintu and Bhaskar, Akash Kumar and Pradhan, Shalini and Prakash, Satyartha and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Chandak, Giriraj Ratan and Lahiri, Amit and Kar, Susanta and Mulay, Shrikant Ramesh and Mugale, Madhav Nilakanth and Srivastava, Mrigank and Khan, Shaziya and Srivastava, Anjali and Tomar, Bhawana and Veerapandian, Murugan and Venkatachalam, Ganesh and Vijayakumar, Selvamani Raja and Agarwal, Ajay and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Sundaram, Gopinath M. and Veeranna, Ravindra P. and Pal, Anirban and Agarwal, Vinay Kumar and Maurya, Anil Ku and Singh, Ranvijay Kumar and Raman, Ashok Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Venkatesan, Subramanian and Sardana, Harish Kumar and Kothari, Anamika and Jain, Rishabh and Thakur, Anupama and Parihar, Devendra Singh and Saifi, Anas and Kaur, Jasleen and Kumar, Virendra and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Singh, Praveen and Chakraborty, Rahul and Chaturvedi, Gaura and Karunakar, Pinreddy and Yadav, Rohit and Singhmar, Sunanda and Singh, Dayanidhi and Sarkar, Sharmistha and Bhattacharya, Purbasha and Acharya, Sundaram and Singh, Vandana and Verma, Shweta and Soni, Drishti and Seth, Surabhi and Vashisht, Sakshi and Thakran, Sarita and Fatima, Firdaus and Singh, Akash Pratap and Sharma, Akanksha and Sharma, Babita and Subramanian, Manikandan and Padwad, Yogendra S. and Hallan, Vipin and Patial, Vikram and Singh, Damanpreet and Tripude, Narendra Vijay and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sarkar, Jit and Ramakrishna, Sistla and Kumar, Balthu Narender and Kumar, Kiran A. and Gandhi, Sumit G. and Jamwal, Piyush Singh and Chouhan, Rekha and Jamwal, Vijay Lakshmi and Kapoor, Nitika and Ghosh, Debashish and Thakkar, Ghanshyam and Subudhi, Umakanta and Sen, Pradip and Chaudhury, Saumya Ray and Kumar, Rashmi and Gupta, Pawan and Tuli, Amit and Sharma, Deepak and Ringe, Rajesh P. and Amarnarayan, D. and Kulkarni, Mahesh and Shanmugam, Dhansekaran and Dharne, Mahesh S. and Dastager, Sayed G. and Joshi, Rakesh and Patil, Amita P. and Mahajan, Sachin N. and Khan, Abujunaid Habib and Wagh, Vasudev and Yadav, Rakesh Kumar and Khilari, Ajinkya and Bhadange, Mayuri and Chaurasiya, Arvindkumar H. and Kulsange, Shabda E. and Khairnar, Krishna and Paranjape, Shilpa and Kalita, Jatin and Sastry, Narahari G. and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, Ravi Kumar and Babu, Elapavalooru Vssk and Sukumaran, Rajeev and Nair, Aiswarya R. and Valappil, Prajeesh Kooloth and Puthiyamadam, Anoop and Velayudhanpillai, Adarsh and Chodankar, Kalpana and Damare, Samir and Madhavi, Yennapu and Aggarwal, Ved Varun and Dahiya, Sumit and Agrawal, Anurag and Dash, Debasis and Sengupta, Shantanu} } @article {47113, title = {Integrated genetic and metabolic landscapes predict vulnerabilities of temozolomide resistant glioblastoma cells}, journal = {npj Systems Biology and Applications}, volume = {7}, year = {2021}, month = {JAN }, pages = {2}, type = {Article}, abstract = {

Metabolic reprogramming and its molecular underpinnings are critical to unravel the duality of cancer cell function and chemo-resistance. Here, we use a constraints-based integrated approach to delineate the interplay between metabolism and epigenetics, hardwired in the genome, to shape temozolomide (TMZ) resistance. Differential metabolism was identified in response to TMZ at varying concentrations in both the resistant neurospheroidal (NSP) and the susceptible (U87MG) glioblastoma cell-lines. The genetic basis of this metabolic adaptation was characterized by whole exome sequencing that identified mutations in signaling pathway regulators of growth and energy metabolism. Remarkably, our integrated approach identified rewiring in glycolysis, TCA cycle, malate aspartate shunt, and oxidative phosphorylation pathways. The differential killing of TMZ resistant NSP by Rotenone at low concentrations with an IC50 value of 5 nM, three orders of magnitude lower than for U87MG that exhibited an IC50 value of 1.8 mM was thus identified using our integrated systems-based approach.

}, doi = {10.1038/s41540-020-00161-7}, author = {Immanuel, Selva Rupa Christinal and Ghanate, Avinash D. and Parmar, Dharmeshkumar S. and Yadav, Ritu and Uthup, Riya and Panchagnula, Venkateswarlu and Raghunathan, Anu} } @article {47758, title = {Palladium supported on magnesium hydroxyl fluoride: an effective acid catalyst for the hydrogenation of imines and N-heterocycles}, journal = {New Journal of Chemistry}, volume = {45}, year = {2021}, month = {OCT }, pages = {19572-19583}, type = {Article}, abstract = {Palladium catalysts supported on acidic fluorinated magnesium hydroxide Pd/MgF2-x(OH)(x) were prepared through precipitation or impregnation methods. Applications to the hydrogenation of various aldimines and ketimines resulted in good catalytic activities at mild temperatures using one atmosphere of hydrogen. Quinolines, pyridines and other N-heterocycles were successfully hydrogenated at higher temperature and hydrogen pressure using low palladium loadings and without the use of any acid additive. Such reactivity trend confirmed the positive effect of the Bronsted and Lewis acid sites from the fluorinated magnesium hydroxide support resulting in the effective pre-activation of N-heterocycle substrates and therefore in the good catalytic activity of the palladium nanoparticles during the hydrogenations. As demonstrated in the hydrogenation of imines, the catalyst was recycled up to 10 times without either loss of activity or palladium leaching.}, issn = {1144-0546}, doi = {10.1039/d1nj03760a}, author = {Kokane, Reshma and Corre, Yann and Kemnitz, Erhard and Dongare, Mohan K. and Agbossou-Niedercorn, Francine and Michon, Christophe and Umbarkar, Shubhangi B.} } @article {47375, title = {Role of Nd3+ concentration on the microstructure and scintillation behaviour of langbeinite sulphate (vol 284, 128997, 2021)}, journal = {Materials Letters}, volume = {290}, year = {2021}, month = {MAY}, pages = {129472}, type = {Correction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2021.129472}, author = {Poornima, Velswamy and Mohan, Subramaniam and Uma, Tiruchirappalli Sivagnanam} } @article {47096, title = {Role of Nd3+ concentration on the microstructure and scintillation behaviour of langbeinite sulphate}, journal = {Materials Letters}, volume = {284}, year = {2021}, month = {FEB }, pages = {128997}, type = {Article}, abstract = {

Langebeinite (K2Ca2(SO4)(3)) ceramics doped with increasing concentrations of Nd3+ ions (0.01-0.04 mol\%) was prepared by wet chemical precipitation and calcination at 800 degrees C. Thermal studies revealed high temperature stability of the phosphors. UV-VIS-NIR spectroscopic analysis of phosphors reveal strong absorption peaks representing f -\> f transitions. Direct bandgap derived from Kubelka-Munk plot was found to be similar to 5.66 eV. FTIR studies reveal tetrahedral symmetry of the SO42 ions. SEM micrographs reveal the formation of phosphors with wide particle size distribution and elemental composition was analysed using EDX studies. Scintillation studies representing a single high intensity peak around 784 nm is ascribed to I-4(9/2) -\> F-4(5/2) + H-2(9/2) transition. Langbeinite phosphor with 0.02 mol\% of Nd3+ exhibited maximum emission intensity indicating optimal concentration for scintillation studies favouring the development of NIR emitting phosphors. (c) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Langebeinites, Luminescence, Microstructure, Neodymium, Scintillation}, issn = {0167-577X}, doi = {10.1016/j.matlet.2020.128997}, author = {Poornima, Velswamy and Mohan, Subramaniam and Uma, Tiruchirappalli Sivagnanam} } @article {47365, title = {Unified approach for the total aynthesis of Bis-THF C-15 acetogenins: a chloroenyne from laurencia majuscula, laurendecumenyne B and laurefurenynes A/B}, journal = {Synthesis-Stuttgart}, year = {2021}, month = {MAY}, type = {Article; Early Access}, abstract = {

A highly diastereoselective total synthesis of several bis-THF C-15 acetogenin natural products, chloroenyne from Laurencia majuscula, laurendecumenyne B, and laurefurenyries A/B, is reported. Additionally the synthesis of an advanced intermediate reported in the earlier total synthesis of (E/Z)-elatenynes (formal synthesis) is described. The salient features in the synthesis include epoxide opening, Birch reduction, Sharpless asymmetric dihydroxylation-cycloetherification, S(N)2 halogenation, and a relay cross metathesis.

}, keywords = {bis-THF C-15 acetogenins, carbohydrate building block, relay-cross-metathesis, S(N)2 halogenation, Sharpless asymmetric dihydroxylation-cycloetherification}, issn = {0039-7881}, doi = {10.1055/a-1500-1407, Early Access Date = MAY 2021}, author = {Senapati, Sibadatta and Unmesh, Nivedya A. and Shet, Manoj N. and Ahmad, Iram and Ajikumar, Nandu and Ramana, Chepuri V.} } @article {47614, title = {Unified approach for the total synthesis of Bis-THF C-15 acetogenins: a chloroenyne from laurencia majuscula, laurendecumenyne B and laurefurenynes A/B}, journal = {Synthesis-Stuttgart}, volume = {53}, year = {2021}, month = {AUG }, pages = {2903-2910}, type = {Article}, abstract = {A highly diastereoselective total synthesis of several bis-THF C-15 acetogenin natural products, chloroenyne from Laurencia majuscula, laurendecumenyne B, and laurefurenyries A/B, is reported. Additionally the synthesis of an advanced intermediate reported in the earlier total synthesis of (E/Z)-elatenynes (formal synthesis) is described. The salient features in the synthesis include epoxide opening, Birch reduction, Sharpless asymmetric dihydroxylation-cycloetherification, S(N)2 halogenation, and a relay cross metathesis.}, keywords = {bis-THF C-15 acetogenins, carbohydrate building block, relay-cross-metathesis, S(N)2 halogenation, Sharpless asymmetric dihydroxylation-cycloetherification}, issn = {0039-7881}, doi = {10.1055/a-1500-1407}, author = {Senapati, Sibadatta and Unmesh, Nivedya A. and Shet, Manoj N. and Ahmad, Iram and Ajikumar, Nandu and Ramana, Chepuri V.} } @article {48228, title = {2-oxoglutarate-dependent dioxygenases drive expansion of steroidal alkaloid structural diversity in the genus Solanum}, journal = {New Phytologist}, volume = {234}, year = {2022}, month = {MAY}, pages = {1394-1410}, type = {Article}, abstract = {

Solanum steroidal glycoalkaloids (SGAs) are renowned defence metabolites exhibiting spectacular structural diversity. Genes and enzymes generating the SGA precursor pathway, SGA scaffold and glycosylated forms have been largely identified. Yet, the majority of downstream metabolic steps creating the vast repertoire of SGAs remain untapped. Here, we discovered that members of the 2-OXOGLUTARATE-DEPENDENT DIOXYGENASE (2-ODD) family play a prominent role in SGA metabolism, carrying out three distinct backbone-modifying oxidative steps in addition to the three formerly reported pathway reactions. The GLYCOALKALOID METABOLISM34 (GAME34) enzyme catalyses the conversion of core SGAs to habrochaitosides in wild tomato S. habrochaites. Cultivated tomato plants overexpressing GAME34 ectopically accumulate habrochaitosides. These habrochaitoside enriched plants extracts potently inhibit Puccinia spp. spore germination, a significant Solanaceae crops fungal pathogen. Another 2-ODD enzyme, GAME33, acts as a desaturase (via hydroxylation and E/F ring rearrangement) forming unique, yet unreported SGAs. Conversion of bitter alpha-tomatine to ripe fruit, nonbitter SGAs (e.g. esculeoside A) requires two hydroxylations; while the known GAME31 2-ODD enzyme catalyses hydroxytomatine formation, we find that GAME40 catalyses the penultimate step in the pathway and generates acetoxy-hydroxytomatine towards esculeosides accumulation. Our results highlight the significant contribution of 2-ODD enzymes to the remarkable structural diversity found in plant steroidal specialized metabolism.

}, keywords = {Solanum, specialized metabolism, steroidal glycoalkaloids (SGAs), structural diversity, Tomato}, issn = {0028-646X}, doi = {10.1111/nph.18064}, author = {Sonawane, Prashant D. and Jozawiak, Adam and Barbole, Ranjit and Panda, Sayantan and Abebie, Bekele and Kazachkova, Yana and Gharat, Sachin A. and Ramot, Ofir and Unger, Tamar and Wizler, Guy and Meir, Sagit and Rogachev, Ilana and Doron-Faigenboim, Adi and Petreikov, Marina and Schaffer, Arthur and Giri, Ashok P. and Scherf, Tali and Aharoni, Asaph} } @article {48169, title = {Efficient cascade C-N coupling reactions catalyzed by a recyclable MoOx/ Nb2O5 nanomaterial for valuable N-heterocycles synthesis}, journal = {Molecular Catalysis}, volume = {532}, year = {2022}, month = {NOV}, pages = {112742}, type = {Article}, abstract = {

The efficient cascade synthesis of pharmaceutically valuable N-heterocycles at solvent-free conditions was achieved using a robust, recyclable MoOx/Nb2O5 nanocatalyst. The results of catalyst screening revealed that the MoOx/Nb2O5 nanorods, calcined at 500 degrees C (MoNb5), exhibit excellent catalytic activity in the oxidative coupling of benzylamine with 96.5\% conversion and \>99.6\% selectivity to the desirable imine product. The uniform dispersion of Mo-oxide nanoparticles (average particle size: 5.2 +/- 0.5 nm) on shape-controlled Nb2O5 nanorods (width: 5.3 +/- 0.5 nm and length: 23-38 nm) in MoNb5 catalyst led to improved structural and acid properties, beneficial for the cascade C-N bond construction. The shape-controlled MoNb5 catalyst showed versatile activity in various cascade C-N coupling reactions to obtain 2-phenylbenzimidazole, 2-phenyl-quinaxoline, and 2-phenyl-2,3-dihydroquinazolin-4(1H)-one with good to excellent yields at solvent-free con-ditions. The optimum ratio of Lewis/Bronsted acid sites, the unique structure of Nb2O5 nanorods, and the strong MoO3-Nb2O5 interaction are the key reasons for the higher activity of MoNb5 catalyst. The efficient reusability of MoNb5 catalyst, its remarkable activity in diverse N-heterocycles synthesis, and efficient gram-scale synthesis emphasize its practical application for the cascade C-N coupling reactions under benign conditions.

}, keywords = {Acid sites optimization, Cascade C-N bond formation, Diverse nitrogenous chemicals, Heterogeneous nanosized catalyst, MoO3-Nb2O5 interaction, Nb2O5 nanorods}, issn = {2468-8231}, doi = {10.1016/j.mcat.2022.112742}, author = {Singh, Nittan and Kalbande, Pavan Narayan and Umbarkar, Shubhangi and Sudarsanam, Putla} } @article {48064, title = {Formation of zircon-type DyCrO4 and its magnetic properties}, journal = {Ceramics International}, volume = {48}, year = {2022}, month = {SEP}, pages = {24666-24676}, type = {Article}, abstract = {

The formation mechanism of hydrolytic sol-gel synthesized DyCrO4 with a complexing agent in acidic and basic mediums is thoroughly studied. The role of complexing agents and pH on phase formation temperature is also intensively investigated. The formation temperature for DyCrO4 is similar to 500 degrees C in the absence and presence of complexing agents such as oxalic acid and ethylenediaminetetraacetic acid (EDTA) at pH 10. When critic acid is used, the DyCrO4 forms with Cr2O3 impurity. The crystallite size in the presence of a complexing agent in the basic medium is similar to 55 nm which is small as compared to only ammonia solution. The various reaction modes lead to tetragonal zircon-type DyCrO4 at similar to 500 degrees C, transforming into orthorhombic perovskite DyCrO3 at 800 degrees C. The magnetization curve shows the ferromagnetic behavior of DyCrO4 below transition temperature T-c similar to 21 K. This low T-c makes nanocrystalline DyCrO4 a potential material for cryogenic applications.

}, keywords = {Complexing agent, DyCrO4, Formation mechanism, Hydrolytic sol-gel method, pH}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2022.05.113}, author = {Ughade, Supriya and Joshi, Bhavana and Poddar, Pankaj} } @article {48076, title = {Green synthesis of cyclohexanone to adipic acid over Fe-W oxides incorporated mesoporous carbon support}, journal = {Catalysis Communications}, volume = {168}, year = {2022}, month = {AUG}, pages = {106466}, type = {Article}, abstract = {

We have prepared iron and tungsten oxides incorporated mesoporous carbon (MC) catalysts using a simple hydrothermal methodology with different carbon sources, and the catalytic performance was investigated for cyclohexanone oxidation. An adequate amount of metal oxide loading has displayed a key role in the selective catalyst for adipic acid (AA) synthesis. The MC catalyst has shown its prime activity under the influence of redox properties of W5+/W6+ and Fe2+/Fe3+ as promoters. The 10\%Fe 90\%W-MC fructose as a carbon source catalyst has provided its best selectivity of 87\% for AA at 120 ?C.

}, keywords = {Adipic Acid, Liquid phase oxidation, mesoporous carbon, Redox center}, issn = {1566-7367}, doi = {10.1016/j.catcom.2022.106466}, author = {Mekala, Siva Prasad and Prabu, Marimuthu and Gawali, Sheetal Datta and Gopakumar, Karthik and Gogoi, Pranjal and Bhatkar, Akash Ravindra and Mohapatra, Gourab and Unnikrishanan, Eeswar and Raja, Thirumalaiswamy} } @article {48227, title = {Gut microbiota dysbiosis in patients with intracranial sino-venous thrombosis and acute ischemic stroke in the young}, journal = {Annals of Indian Academy of Neurology}, volume = {25}, year = {2022}, month = {SEP-OCT}, pages = {980+}, type = {Letter}, issn = {0972-2327}, doi = {10.4103/aian.aian_393_22}, author = {Prabhu, Varsha A. and Rajput, Vinay and Yadav, Rakeshkumar and Gohil, Kushal and Dharne, Mahesh S. and Unnikrishnan, Mazhuvancherry Kesavan and Gorthi, Sankar Prasad} } @article {48340, title = {Hyperthermia and doxorubicin release by Fol-LSMO nanoparticles induce apoptosis and autophagy in breast cancer cells}, journal = {Nanomedicine}, volume = {17}, year = {2022}, month = {OCT}, pages = {1929-1949}, type = {Article}, abstract = {

Background: Studies on the anticancer effects of lanthanum strontium manganese oxide (LSMO) nanoparticles (NPs)-mediated hyperthermia at cellular and molecular levels are scarce. Materials \& methods: LSMO NPs conjugated with folic acid (Fol-LSMO NPs) were synthesized, followed by doxorubicin-loading (DoxFol-LSMO NPs), and their effects on breast cancer cells were investigated. Results: Hyperthermia (45 degrees C) and combination treatments exhibited the highest (similar to 95\%) anticancer activity with increased oxidative stress. The involvement of intrinsic mitochondria-mediated apoptotic pathway and induction of autophagy was noted. Cellular and molecular evidence confirmed the crosstalk between apoptosis and autophagy, involving Beclin1, Bcl2 and Caspase-3 genes with free reactive oxygen species presence. Conclusion: The study confirmed hyperthermia and doxorubicin release by Fol-LSMO NPs induces apoptosis and autophagy in breast cancer cells.

}, keywords = {Apoptosis, Autophagy, Breast cancer, combination therapy, doxorubicin, Folic acid, hyperthermia, LSMO, MDA-MB231 cells, PEG}, issn = {1743-5889}, doi = {10.2217/nnm-2022-0171}, author = {Kulkarni-Dwivedi, Neha and Patel, Pratikshkumar R. and Shravage, V. Bhupendra and Umrani, Rinku D. and Paknikar, Kishore M. and Jadhav, Sachin H.} } @article {48406, title = {Improved mucoadhesion, permeation and in vitro anticancer potential of synthesized thiolated acacia and karaya gum combination: a systematic study}, journal = {Molecules}, volume = {27}, year = {2022}, month = {OCT}, pages = {6829}, type = {Article}, abstract = {

Thiolation of polymers is one of the most appropriate approaches to impart higher mechanical strength and mucoadhesion. Thiol modification of gum karaya and gum acacia was carried out by esterification with 80\% thioglycolic acid. FTIR, DSC and XRD confirmed the completion of thiolation reaction. Anticancer potential of developed thiomer was studied on cervical cancer cell lines (HeLa) and more than 60\% of human cervical cell lines (HeLa) were inhibited at concentration of 5 mu g/100 mu L. Immobilized thiol groups were found to be 0.8511 mmol/g as determined by Ellman{\textquoteright}s method. Cytotoxicity studies on L929 fibroblast cell lines indicated thiomers were biocompatible. Bilayered tablets were prepared using Ivabradine hydrochloride as the model drug and synthesized thiolated gums as mucoadhesive polymer. Tablets prepared using thiolated polymers in combination showed more swelling, mucoadhesion and residence time as compared to unmodified gums. Thiol modification controlled the release of the drug for 24 h and enhanced permeation of the drug up to 3 fold through porcine buccal mucosa as compared to tablets with unmodified gums. Thiolated polymer showed increased mucoadhesion and permeation, anticancer potential, controlled release and thus can be utilized as a novel excipient in formulation development.

}, keywords = {buccal tablets, enhanced permeation, ivabradine HCl, mucoadhesion, thiolated gums}, doi = {10.3390/molecules27206829}, author = {Munot, Neha and Kandekar, Ujjwala and Rikame, Chaitali and Patil, Abhinandan and Sengupta, Poulomi and Urooj, Shabana and Bilal, Anusha} } @article {48364, title = {Lewis acid-catalyzed chemodivergent and regiospecific reaction of phenols with quaternary peroxyoxindoles}, journal = {Journal of Organic Chemistry}, volume = {87}, year = {2022}, month = {NOV }, pages = {14155-14167}, type = {Article}, abstract = {

The indium-catalyzed regiospecific coupling of substituted phenol derivatives and quaternary peroxyoxindoles for the synthesis of C2 or C4 benzoxazin-3-one-substituted phenols via skeletal rearrangement is described. This reaction is demonstrated with 17 examples with good yields and diverse aryl substituents. In contrast to the indium-catalyzed reaction, the Cu(OTf)2- catalyzed reaction of the phenol with quaternary peroxyoxindoles afforded C2 or C4 2-oxindole-substituted phenol derivatives. This diverse catalytic reaction generated various biologically important phenol-substituted 2-oxindole derivatives directly without any skeleton rearrangement and was demonstrated with 19 examples in high yield. The regiospecificity and the reaction pathways were explained with the support of density functional theory (DFT).

}, issn = {0022-3263}, doi = {10.1021/acs.joc.2c01701}, author = {Shaikh, Moseen A. and Samal, Pragnya Paramita and Ubale, Akash S. and Krishnamurty, Sailaja and Gnanaprakasam, Boopathy} } @article {48236, title = {Machine learning-based approach to determine infection status in recipients of BBV152 (Covaxin) whole-virion inactivated SARS-CoV-2 vaccine for serological surveys}, journal = {Computers in Biology and Medicine}, volume = {146}, year = {2022}, month = {JUL}, pages = {105419}, type = {Article}, abstract = {

Data science has been an invaluable part of the COVID-19 pandemic response with multiple applications, ranging from tracking viral evolution to understanding the vaccine effectiveness. Asymptomatic breakthrough infections have been a major problem in assessing vaccine effectiveness in populations globally. Serological discrimination of vaccine response from infection has so far been limited to Spike protein vaccines since whole virion vaccines generate antibodies against all the viral proteins. Here, we show how a statistical and machine learning (ML) based approach can be used to discriminate between SARS-CoV-2 infection and immune response to an inactivated whole virion vaccine (BBV152, Covaxin). For this, we assessed serial data on antibodies against Spike and Nucleocapsid antigens, along with age, sex, number of doses taken, and days since last dose, for 1823 Covaxin recipients. An ensemble ML model, incorporating a consensus clustering approach alongside the support vector machine model, was built on 1063 samples where reliable qualifying data existed, and then applied to the entire dataset. Of 1448 self-reported negative subjects, our ensemble ML model classified 724 to be infected. For method validation, we determined the relative ability of a random subset of samples to neutralize Delta versus wild-type strain using a surrogate neutralization assay. We worked on the premise that antibodies generated by a whole virion vaccine would neutralize wild type more efficiently than delta strain. In 100 of 156 samples, where ML prediction differed from self-reported uninfected status, neutralization against Delta strain was more effective, indicating infection. We found 71.8\% subjects predicted to be infected during the surge, which is concordant with the percentage of sequences classified as Delta (75.6\%-80.2\%) over the same period. Our approach will help in real-world vaccine effectiveness assessments where whole virion vaccines are commonly used.

}, keywords = {BBV152, Covaxin, COVID-19, Ensemble methods, Infection, machine learning, SARS-CoV-2}, issn = {0010-4825}, doi = {10.1016/j.compbiomed.2022.105419}, author = {Singh, Prateek and Ujjainiya, Rajat and Prakash, Satyartha and Naushin, Salwa and Sardana, Viren and Bhatheja, Nitin and Singh, Ajay Pratap and Barman, Joydeb and Kumar, Kartik and Gayali, Saurabh and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Lahiri, Amit and Kar, Susanta and Bhosale, Vivek and Srivastava, Mrigank and Mugale, Madhav Nilakanth and Pandey, C. P. and Khan, Shaziya and Katiyar, Shivani and Raj, Desh and Ishteyaque, Sharmeen and Khanka, Sonu and Rani, Ankita and Promila and Sharma, Jyotsna and Seth, Anuradha and Dutta, Mukul and Saurabh, Nishant and Veerapandian, Murugan and Venkatachalam, Ganesh and Bansal, Deepak and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Veeranna, Ravindra P. and Pal, Anirban and Singh, Ranvijay Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Rahman, Syed Nasar and Selvakumar, Gopika and Venkatesan, Subramanian and Karmakar, Malay Kumar and Sardana, Harish Kumar and Kothari, Anamika and Parihar, Devendra Singh and Thakur, Anupma and Saifi, Anas and Gupta, Naman and Singh, Yogita and Reddu, Ritu and Gautam, Rizul and Mishra, Anuj and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Padwad, Yogendra and Patial, Vikram and Hallan, Vipin and Singh, Damanpreet and Tirpude, Narendra and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sistla, Ramakrishna and Balthu, Narender Kumar and Kumar, Kiran A. and Ranjith, Siva and Kumar, B. Vijay and Jamwal, Piyush Singh and Wali, Anshu and Ahmed, Sajad and Chouhan, Rekha and Gandhi, Sumit G. and Sharma, Nancy and Rai, Garima and Irshad, Faisal and Jamwal, Vijay Lakshmi and Paddar, Masroor Ahmad and Khan, Sameer Ullah and Malik, Fayaz and Ghosh, Debashish and Thakkar, Ghanshyam and Barik, S. K. and Tripathi, Prabhanshu and Satija, Yatendra Kumar and Mohanty, Sneha and Khan, Md Tauseef and Subudhi, Umakanta and Sen, Pradip and Kumar, Rashmi and Bhardwaj, Anshu and Gupta, Pawan and Sharma, Deepak and Tuli, Amit and Chaudhuri, Saumya Ray and Krishnamurthi, Srinivasan and Prakash, L. and Rao, V. Ch and Singh, B. N. and Chaurasiya, Arvindkumar and Chaurasiya, Meera and Bhadange, Mayuri and Likhitkar, Bhagyashree and Mohite, Sharada and Patil, Yogita and Kulkarni, Mahesh and Joshi, Rakesh and Pandya, Vaibhav and Mahajan, Sachin and Patil, Amita and Samson, Rachel and Vare, Tejas and Dharne, Mahesh and Giri, Ashok and Mahajan, Sachin and Paranjape, Shilpa and Sastry, G. Narahari and Kalita, Jatin and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, RaviKumar and Dutta, Prachurjya and Singh, Moirangthem Goutam and Gogoi, Gayatri and Tapadar, Yasmin Begam and Babu, Elapavalooru V. S. S. K. and Sukumaran, Rajeev K. and Nair, Aishwarya R. and Puthiyamadam, Anoop and Valappil, Prajeesh Kooloth and Prasannakumari, Adrash Velayudhan Pillai and Chodankar, Kalpana and Damare, Samir and Agrawal, Ved Varun and Chaudhary, Kumardeep and Agrawal, Anurag and Sengupta, Shantanu and Dash, Debasis} } @article {48234, title = {SNP discovery and structural insights into OeFAD2 unravelling high oleic/linoleic ratio in olive oil}, journal = {Computational and Structural Biotechnology Journal}, volume = {20}, year = {2022}, month = {JUL}, pages = {1229-1243}, type = {Article}, abstract = {

Fatty Acid Desaturase 2 (FAD2), a key enzyme in the fatty acid biosynthesis pathway, is involved in the desaturation and conversion of oleic acid to linoleic acid. Therefore, it plays a crucial role in oleic/linoleic acid ratio and the quality of olive oil. DNA sequencing of 19 FAD2 genes from a set of olive oil varieties revealed several single-nucleotide polymorphisms (SNPs) and highlighted associations between some of the SNPs and saturated fatty acids contents. This was further confirmed by SNP-interaction and machine learning approach. Haplotype diversity analysis led to the discovery of three highly polymorphic SNPs and four haplotypes harboring differential oleic/linoleic acid ratios. Moreover, a combination of molecular modeling and docking experiments allowed a deeper and better understanding of the structure-function relationship of the FAD2 enzyme. Sequence patterns and variations involved in the regulation of the FAD2 activity were also identified. Furthermore, S82C and H213N substitutions in OeFAD2 make the Oueslati variety more interesting in terms of fatty acid profile and oleic acid level. (C) 2022 The Authors. Published by Elsevier B.V. on behalf of Research Network of Computational and Structural Biotechnology.

}, keywords = {docking, Fatty acid desaturase, Haplotype, machine learning, Oleic/linoleic acid ratio, Protein structure}, issn = {2001-0370}, doi = {10.1016/j.csbj.2022.02.028}, author = {Ben Ayed, Rayda and Moreau, Fabienne and Ben Hlima, Hajer and Rebai, Ahmed and Ercisli, Sezai and Kadoo, Narendra and Hanana, Mohsen and Assouguem, Amine and Ullah, Riaz and Ali, Essam A.} } @article {48211, title = {Spinel magnesium ferrite (MgFe2O4): a glycine-assisted colloidal combustion and its potentiality in gas-sensing application}, journal = {Chemosensors}, volume = {10}, year = {2022}, month = {SEP}, pages = {361}, type = {Article}, abstract = {

Herein, we describe the facile synthesis of spinel MgFe2O4 ferrite and its potential use as a gas sensor using a straightforward and reliable sol-gel approach, i.e., the glycine-assisted auto-combustion route. The novelty in obtaining the sensing material via the auto-combustion route is its inherent simplicity and capability to produce the material at an industry scale. The said cost-effective process makes use of simple metal salts (Mg and Fe-nitrates) and glycine in an aqueous solution, which leads to the formation of spinel MgFe2O4 ferrite. A single-phase crystallinity with crystallite sizes ranging between 36 and 41 nm was observed for the synthesized materials using the X-ray diffraction (XRD) technique. The porous morphologies of the synthesized materials caused by auto-ignition during the combustion process were validated by the microscopic investigations. The EDS analysis confirmed the constituted elements such as Mg, Fe, and O, without any impurity peaks. The gas-sensing ability of the synthesized ferrites was examined to detect various reducing gases such as LPG, ethanol, acetone, and ammonia. The ferrite showed the highest response (\>80\%) toward LPG with the response and recovery times of 15 s and 23 s, respectively. Though the sensor responded low toward ammonia (similar to 30\%), its response and recovery times were very quick, i.e., 7 s and 9 s, respectively. The present investigation revealed that the synthesized ferrite materials are good candidates for fabricating high-performance sensors for reducing gases in real-world applications.

}, keywords = {Gas sensors, glycine combustion, MgFe2O4, reducing gases}, doi = {10.3390/chemosensors10090361}, author = {Nadargi, Digambar and Umar, Ahmad and Nadargi, Jyoti and Patil, Jayvant and Mulla, Imtiaz and Akbar, Sheikh and Suryavanshi, Sharad} } @article {48223, title = {Stacking herbicide detoxification and resistant genes improves glyphosate tolerance and reduces phytotoxicity in tobacco (Nicotiana tabacum L.) and rice (Oryza sativa L.)}, journal = {Plant Physiology and Biochemistry}, volume = {189}, year = {2022}, month = {OCT}, pages = {126-138}, type = {Article}, abstract = {

Glyphosate residues retained in the growing meristematic tissues or in grains of glyphosate-resistant crops affect the plants physiological functions and crop yield. Removing glyphosate residues in the plants is desirable with no penalty on crop yield and quality. We report a new combination of scientific strategy to detoxify glyphosate that reduces the residual levels and improve crop resistance. The glyphosate detoxifying enzymes Aldo-keto reductase (AKR1) and mutated glycine oxidase (mGO) with different modes of action were co-expressed with modified EPSPS, which is insensitive to glyphosate in tobacco (Nicotiana tabacum L.) and rice (Oryza sativa L.). The transgenic tobacco plants expressing individual PsAKR1, mGO, CP4-EPSPS, combinations of PsAKR1:CP4EPSPS, PsAKR1:mGO, and multigene with PsAKR1: mGO: CP4EPSPS genes were developed. The bio-efficacy studies of in-vitro leaf regeneration on different concentrations of glyphosate, seedling bioassay, and spray on transgenic tobacco plants demonstrate that glyphosate detoxification with enhanced resistance. Comparative analysis of the transgenic tobacco plants reveals that double and multigene expressing transgenics had reduced accumulation of shikimic acid, glyphosate, and its primary residue AMPA, and increased levels of sarcosine were observed in all PsAKR1 expressing transgenics. The multigene expressing rice transgenics showed improved glyphosate resis-tance with yield maintenance. In summary, results suggest that stacking genes with two different detoxification mechanisms and insensitive EPSPS is a potential approach for developing glyphosate-resistant plants with less residual content.

}, keywords = {Detoxification, Gene stacking, Glyphosate, Herbicide, Multigene, Residual toxicity, Resistant, rice, Tobacco, Transgenics}, issn = {0981-9428}, doi = {10.1016/j.plaphy.2022.08.025}, author = {Vennapusa, Amaranatha Reddy and Agarwal, Subham and Hm, Hanumanth Rao and Aarthy, Thiagarayaselvam and Babitha, K. C. and Thulasiram, V. Hirekodathakallu and Kulkarni, Mahesh J. and Melmaiee, Kalpalatha and Sudhakar, Chinta and Udayakumar, M. and Vemanna, Ramu S.} } @article {48081, title = {Understanding unfolding and refolding of the antibody fragment (Fab) III: mapping covalent and non-covalent interactions during in-vitro refolding of light chain, heavy chain, and Fab.}, journal = {Biochemical Engineering Journal}, volume = {187}, year = {2022}, month = {NOV}, pages = {108644}, type = {Article}, abstract = {

In-vitro refolding of the antibody fragments from inclusion bodies is a critical manufacturing bottleneck. We have previously reported that Fab refolding involves the formation of an intermediate. To further decode the refolding pathway, we have mapped the covalent and non-covalent interactions during in-vitro refolding of individual light chain (LC), heavy chain (HC), and intact Fab. Intrinsic fluorescence analysis was performed to map the non -covalent interactions, whereas time-dependent disulfide mapping was performed using LC-MS/MS analysis under non-reducing and reducing atmospheres. Refolding of purified LC, HC, and intact Fab (Biosimilar rHu Ranibi-zumab) was investigated in the study. Under the reducing condition, LC, HC, and intact Fab required around 96, 30, and 70 h, respectively, whereas, under non-reducing conditions, they required only 48, 10, and 48 h, respectively, to acquire the native conformation. The disulfide bond mapping revealed that the bond between LC_Cys23/Cys88 is more unstable. The peptides mapped with the inter-chain disulfide bond were identified at 48 h during the refolding and can be considered as the rate-limiting step in (Fab) refolding. We have also studied a new refolding strategy involving assembly of separately refolded LC and HC into Fab molecule. In this case the Fab refolding yield was low (18.0 +/- 1.36\%), indicating inefficient assembly of refolded LC and HC chain into native Fab molecule.

}, keywords = {Antibody fragment, Disulfide bond formation, In-vitro refolding, Light and heavy chain, rHu Ranibizumab}, issn = {1369-703X}, doi = {10.1016/j.bej.2022.108644}, author = {Gani, Kayanat and Chirmade, Tejas and Ughade, Santosh and Thulasiram, Hirekodathakallu and Bhambure, Rahul} } @article {48728, title = {Chromatography assisted in-vitro refolding and purification of recombinant peptibody: recombinant romiplostim a case study}, journal = {International Journal of Biological Macromolecules}, volume = {249}, year = {2023}, month = {SEP }, pages = {126037}, type = {Article}, abstract = {

In-vitro protein refolding is one of the key rate-limiting unit operations in manufacturing of fusion proteins such as peptibodies expressed using E. coli. Dilution-assisted refolding is the most commonly used industrial practice to achieve the soluble, native functional form of the recombinant protein from the inclusion bodies. This study is focused on developing a chromatography-assisted in-vitro refolding platform to produce the biologically active, native form of recombinant peptibody. Recombinant Romiplostim was selected as a model protein for the study. A plug flow tubular reactor was connected in series with capture step affinity chromatography to achieve simultaneous in-vitro refolding and capture step purification of recombinant Romiplostim. Effect of various critical process parameters like fold dilution, temperature, residence time, and Cysteine: DTT ratio was studied using a central composite based design of experiment strategy to achieve a maximum refolding yield of selected peptibody. Under optimum refolding conditions, the maximum refolding yield of 57.0 \& PLUSMN; 1.5 \% and a purity of over 79.73 \& PLUSMN; 3.4 \% were achieved at 25-fold dilution, 15 degrees C temperature, 6 h residence time with 6 mM and 10 mM of cysteine and DTT, respectively. The formation of native peptibody structure was examined using various orthogonal analytical tools to study the protein{\textquoteright}s primary, secondary, and tertiary structure. The amino acid sequence for the disulfide-linked peptide was mapped using collision-induced dissociation (CID) to confirm the formation of interchain disulfide bonds between Cys7-Cys7 and Cys10-Cys10 similarly for intra-chain disulfide bonds between Cys42-Cys102, and Cys148-Cys206. The developed protocol here is a valuable tool to identify high-yield scalable refolding conditions for multi-domain proteins involving inter-domain disulfide bonds.

}, keywords = {CE-SDS, Disulfide bonds, In-vitro refolding, Peptibody, Romiplostim}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.126037}, author = {Rana, Sunil and Ughade, Santosh and Kumthekar, Rupali and Bhambure, Rahul} } @article {48443, title = {Developing a mealybug pheromone monitoring tool to enhance IPM practices in New Zealand vineyards}, journal = {Journal of Pest Science}, volume = {96}, year = {2023}, month = {JAN}, pages = {29-39}, type = {Article}, abstract = {

Mealybugs are phloem-feeding insects found on many crops worldwide. In New Zealand vineyards, they transmit the economically important Grapevine leafroll-associated virus 3 (GLRaV-3). For some mealybug species, synthetic sex pheromones have been commercialised, and are used as monitoring tools. The mealybugs Pseudococcus longispinus and Pseudococcus calceolariae are major pests in many New Zealand vineyards. We present work on the development of a combined P. longispinus and P. calceolariae pheromone lure. The optimal dose for monitoring P. longispinus was found to be 10 mu g of the (S)-(+)-enantiomer, either alone or in the racemic mixture. Addition of the corresponding alcohol did not improve trap catch of P. longispinus. Both the P. longispinus and the P. calceolariae pheromone lures remained active in the field for 90 days. Combining the 2 species{\textquoteright} pheromones had no negative effects on male mealybug trap catch for either species. We conclude that the pheromone ester alone is the best lure for the male P. longispinus. Combining the two mealybug species{\textquoteright} pheromones into a single lure provides the New Zealand viticultural industry with an efficient monitoring tool. Late-vintage deployment of baited lures will provide information on mealybug abundance and local distribution that will inform the scope of future insecticide programmes, to target areas based on need rather than an area-wide application by default.

}, keywords = {Citrophilus mealybug, Integrated pest management (IPM), Long-tailed mealybug, monitoring, Pseudococcus calceolariae, Pseudococcus longispinus}, issn = {1612-4758}, doi = {10.1007/s10340-022-01504-5}, author = {Sullivan, Nicola J. and Bell, Vaughn A. and Butler, Ruth C. and Wallis, Roger and Ramesh, Remya and Reddy, D. Srinivasa and Twidle, Andrew M. and Bunn, Barry and Unelius, C. Rikard and Manning, Lee-Anne M. and Suckling, David M.} } @article {48748, title = {Elevated level of glycated KQTALVELVK peptide of albumin is associated with the risk of diabetic nephropathy}, journal = {ACS Omega}, volume = {8}, year = {2023}, month = {JUN }, pages = {20654-20660}, type = {Article}, abstract = {

Diabetic nephropathyis a leading cause of end-stagerenal disease.Hence, early detection of diabetic nephropathy is essential to mitigatethe disease burden. Microalbuminuria, the currently used diagnosticmarker of diabetic nephropathy, is not efficient in detecting it atan early stage. Therefore, we explored the utility of glycated humanserum albumin (HSA) peptides for risk prediction of diabetic nephropathy.Three glycation-sensitive HSA peptides, namely, FKDLG-EENFK,KQTAL-VELVK, and KVPQVST-PTLVEVSR, with deoxyfructosyllysine(DFL) modification were quantified by targeted mass spectrometry (MS)in a study population comprising healthy and type II diabetes subjectswith and without nephropathy. Mass spectrometry, receiver operatingcharacteristic (ROC) curve, and correlation analysis revealed thatthe DFL-modified KQTALVELVK peptide was better than other glycatedHSA peptides and HbA(1c) for identifying diabetic nephropathy.DFL-modified KQTALVELVK could be a potential marker for risk predictionof diabetic nephropathy.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c01219}, author = {Chaurasiya, Arvindkumar H. and Jaiswal, Meera R. and Bayatigeri, Santhakumari and Kahar, Shweta and Tiwari, Shalbha and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @article {48337, title = {Gas sensors and factors influencing sensing mechanism with a special focus on MOS sensors}, journal = {Journal of Materials Science}, volume = {58}, year = {2023}, month = {JAN}, pages = {559-582}, type = {Review}, abstract = {

Industrialization and its progress are very important for the economy and to move towards prosperity, stimulating innovation and creating jobs. Nonetheless, industrialization has negative impacts, if not done judiciously, such as pollution, increased greenhouse gas emissions, and global warming. Therefore, amenity-with-security is of fundamental significance in a new and dynamic lifestyle. A gas sensor is one of the crucial devices for monitoring and subsequently preserving the clean atmosphere among a number of other safety technologies. In-depth assessments of gas sensors and their necessity in the environment (air) pollution are provided in the current review. With a special emphasis on metal oxide semiconductor (MOS)-based gas sensors, the review includes a thorough study of gas sensors and the factors relating to sensing mechanisms. It not only describes the basic concepts and brief history of gas sensors, but also highlights the schemes responsible for improving the gas sensing properties and state-of-art literature review. These schemes include (1) surface engineering/morphological tuning and (2) bulk and surface doping. To keep scientific rigour and in-depth analyses, this review focuses on these two schemes only. In the doping area, the emphasis is given on graphene loading, decorated with nanoparticles of noble metals, spillover mechanism, and heterojunction (p-n, n-n, and p-p) formation. The conclusion summarizes the most optimized MOS gas sensors with enhanced gas sensing capabilities. The emphasis is given to formulate the article in such a way that it will be useful for the beginners who wish to explore the gas sensor research field, as well as to the established researchers to further improve the sensing capabilities of MOS gas sensors.

}, issn = {0022-2461}, doi = {10.1007/s10853-022-08072-0}, author = {Nadargi, Digambar Y. Y. and Umar, Ahmad and Nadargi, Jyoti D. D. and Lokare, Smita A. A. and Akbar, Sheikh and Mulla, Imtiaz S. S. and Suryavanshi, Sharad S. S. and Bhandari, Nagesh L. L. and Chaskar, Manohar G. G.} } @article {48739, title = {Green adeptness in synthesis of non-toxic copper and cobalt oxide nanocomposites with multifaceted bioactivities}, journal = {Cancer Nanotechnology}, volume = {14}, year = {2023}, month = {DEC}, pages = {79}, type = {Article}, abstract = {

Background: In the present era, we are facing different health problems mainly concerning with drug resistance in microorganisms as well as in cancer cells. In addition, we are also facing the problems of controlling oxidative stress and insect originated diseases like dengue, malaria, chikungunya, etc. originated from mosquitoes. In this investigation, we unfurled the potential of Achatina fulica mucus in green synthesis of mucus mediated copper oxide bio-nanocomposites (SM-CuONC) and cobalt oxide bio-nanocomposites (SM-Co3O4NC). Herein we carried out the physico-chemical characterization like UV-Vis spectra, X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM), Energy Dispersive X-ray Analysis (EDAX) and X-ray photoelectron spectroscopy (XPS) of as synthesized bio-nanocomposites. Both the bio-nanocomposites were tested for their potential as antimicrobial activity using well diffusion assay, anticancer activity by MTT assay, antioxidant activity by phosphomolybdenum assay and mosquito larvicidal activity.Results: The results of this study revealed that, SM-CuONC and SM-Co3O4NC were synthesized successfully using A. fulica mucus. The FESEM and TEM data reveal the formation of nanoparticles with quasi-spherical morphology and average particle size of similar to 18 nm for both nanocomposites. The EDAX peak confirms the presence of elemental copper and cobalt in the analyzed samples. The X-ray diffraction analysis confirmed the crystalline nature of the CuO and Co3O4. The result of anti microbial study exhibited that, SM-CuONC showed maximum antimicrobial activity against Escherichia coli NCIM 2065 and Aspergillus fumigatus NCIM 902 which were noted as 2.36 +/- 0.31 and 2.36 +/- 0.59 cm resp. at 60 mu g/well concentration. The result of anticancer activity for SM-CuONC was exhibited as, 68.66 +/- 3.72, 62.66 +/- 3.61 and 71.00 +/- 2.36 percent kill, while SM-Co3O4NC exhibited 61.00 +/- 3.57, 72.66 +/- 4.50 and 71.66 +/- 4.22 percent kill against Human colon cancer (HCT-15), Cervical cancer (HeLa), and Breast cancer (MDA-MB-231) cell lines, respectively, at 20 mu g/well concentration. Both the nanocomposites also exhibited better antioxidant activity. Total antioxidant activity for SM-CuONC at 50 mu g/ml concentration was found to be highest as 55.33 +/- 3.72 while that of SM-Co(3)O(4)Ns was 52.00 +/- 3.22 mM of ascorbic acid/mu g respectively. Both bio-nanocomposites also exhibited 100\% mosquito larvicidal activity at concentration ranging from 40 to 50 mg/l. During cytotoxicity study it is noted that at 5 mu g/well concentration, SM-CuO and SM-Co3O4NCs suspension showed more than 97\% viability of normal (L929) cell lines. We also studied phytotoxicity of both bio-nanocomposites on Triticum aestivum. In this study, 100\% seed germination was observed when seeds are treated with SM-CuONC and SM-Co3O4NC at 500 mg/l and 250 mg/l concentration respectively.Conclusions: This study concludes that in future as synthesized SM-CuONC and SM-Co3O4NC can be used in pharmaceutical, health care system for betterment and welfare of human life as both bio-nanocomposites exhibits better antimicrobial, anticancer, antioxidant and mosquito larvicidal potential.

}, keywords = {Achatina fulica mucus, Bio-nanocomposites, Biological activities, Characterization, Toxicity}, issn = {1868-6958}, doi = {10.1186/s12645-023-00226-2}, author = {Mane, Pramod C. and Kadam, Deepali D. and Khadse, Ashok N. and Chaudhari, Aditya R. and Ughade, Supriya P. and Agawane, Sachin B. and Chaudhari, Ravindra D.} } @article {48824, title = {Green synthesis of GO-loaded Ag/ZnO nanocomposites for methyl orange degradation}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {34}, year = {2023}, month = {JUL}, pages = {1568}, type = {Article}, abstract = {

Nature is a perfect laboratory for creating novel nanomaterials for a variety of applications. A robust green synthesis approach to GO-loaded Ag/ZnO nanocomposite materials using medicinal plant extraction and their potential application in methyl orange dye degradation are reported. The straightforward technique employs zinc and silver nitrate precursors in an aqueous solution of medicinal plant extract, causing the precipitation process. Prior to photocatalytic investigations, the physico-chemical properties of the material are analysed using TG-DTA, XRD, FE-SEM, TEM, EDAX and BET. The developed material showcase hexagonal wurtzite structure of ZnO, with face-centered-cubic phase of Ag and AgCl. All the samples exhibit aggregated, irregular rounded grains, as expected in the precipitation synthesis process. Pristine ZnO showed 15.5\% degradation efficiency towards methyl orange, which was further improved by doping Ag from 0.5 to 2 mol\%. The catalyst with 1 mol\% Ag doping resulted in the better photocatalytic activity (26.30\%), which has again improved by loading the GO (27.46\%). The outcome of this study provides the new insights to GO-loaded Ag/ZnO nanocomposites by green synthesis route, in view of photocatalytic applications.

}, issn = {0957-4522}, doi = {10.1007/s10854-023-10979-6}, author = {Nadargi, Digambar Y. and Nadargi, Jyoti D. and Tamboli, Mohaseen S. and Tamboli, Asiya M. and Mulla, Imitaz S. and Umar, Ahmad and Truong, Nguyen Tam Nguyen and Suryavanshi, Sharad S.} } @article {48341, title = {Lead-free solid state mechanochemical synthesis of Cs2NaBi1-XFeXCl6 double perovskite: reduces band gap and enhances optical properties}, journal = {Inorganic Chemistry}, volume = {62}, year = {2023}, month = {MAR}, pages = {4861-4871}, type = {Article}, abstract = {

Efficient and stable lead-free halide double perovskites (DPs) have attracted great attention for the future generation of electronic devices. Herein, we have developed a doping approach to incorporate Fe3+ ions into the Cs2NaBiCl6 crystal unit and reveal a crystallographic and optoelectronic study of the Cs2NaBi1-xFexCl6 double perovskite. We report a simple solid-state mechanochemical method that has a solvent-free, one-step, green chemistry approach for the synthesis of Cs2NaBi1-xFexCl6 phosphor. The analysis of powder X-ray diffraction (XRD) data determines the contraction of the lattice due to the incorporation of Fe3+ cations, and this effect is well supported by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and solid-state nuclear magnetic resonance spectroscopy (ss-NMR). The band gap is reduced with increasing Fe content owing to the strong overlap of the Fe-3d orbitals with Cl-3p orbitals and shift of the valence band maxima (VBM) toward higher energies, as confirmed by ultraviolet photoelectron spectroscopy (UPS) and density functional theory (DFT) analyses. Photoluminescence (PL) studies of Cs2NaBi1-xFexCl6 phosphors exhibit a large Stokes shift, broadband emission, and increased PL intensity more than ten times for 15\% of Fe content phosphor with enhancement in the average decay lifetimes (up to 38 ns) compared to pristine Cs2NaBiCl6 DP. These results indicate that the transition of dark self-trapping of excitons (STEs) into bright STEs enhances yellow emission. XRD, UV, and thermo-gravimetric analysis (TGA) confirmed that the Cs2NaB1-xFexCl6 DPs have good structural and thermal stabilities. Our findings indicate that the doping of Fe3+ cations into the Cs2NaBiCl6 lattice is a constructive strategy to enhance significantly the optoelectronic properties of these phosphors.

}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.2c04149}, author = {Udavant, Rohini and Thawarkar, Sachin and Rondiya, Sachin and Shelke, Ankita and Aher, Rahul and Ajithkumar, Thalasseril G. and Cross, Russell W. and Dzade, Nelson Y. and Jadkar, Sandesh} } @article {48707, title = {Mapping time dependent disulfide bond formation during in-vitro refolding of recombinant peptibody: a Fc-fusion protein}, journal = {Biochemical Engineering Journal}, volume = {197}, year = {2023}, month = {AUG}, pages = {108969}, type = {Article}, abstract = {

Disulfide bonds are commonly found in covalent interactions, which play a vital role in establishing the three-dimensional structure of proteins and maintaining their biological activity. This investigation is focused on time dependant mapping of intra and inter-disulfide bonds during in-vitro refolding of recombinant peptibody using LC-ESI-MS/MS. The selected recombinant peptibody is a homodimeric, aglycosylated Fc-fusion protein expressed in E. coli. The amino acid sequence in the disulfide bond containing peptides was confirmed at MS/MS level using the CID-based fragmentation approach. During in-vitro refolding of peptibody, a peptide with inter -chain disulfide bond is observed post 4 h, with low area intensity, and it reached a maximum in 96 h. How-ever, maximum area intensity was reached for the intra-chain disulfide bond in 72 h. Since cysteine residues responsible for intra-chain disulfide bonds are present in complex part of the Fc domain, formation of intra-chain disulfide bonds may be an overall rate-limiting step in recombinant Romiplostim refolding. Proper folding and contributions by non-covalent interactions will be required to form intra-chain disulfide bond. Monitoring time -based formation of such non-covalent interactions was carried out using intrinsic fluorescence during protein refolding. Observations from intrinsic fluorescence show that 4-6 h is most crucial time for domain formation. Observations from this study will help characterize structural integrity and quality during process and product development for consistent product quality.

}, keywords = {Disulfide bond formation, In -vitro refolding, Intrinsic fluorescence, Mass spectroscopy, Peptibody, Time based mapping}, issn = {1369-703X}, doi = {10.1016/j.bej.2023.108969}, author = {Kumthekar, Rupali and Rana, Sunil and Ughade, Santosh and Bhambure, Rahul} } @article {48784, title = {One-pot synthesized efficient molybdenum-niobium-oxide nanocatalyst for selective C-O and C-N coupling reactions at mild conditions}, journal = {Catalysis Communications}, volume = {183}, year = {2023}, month = {OCT}, pages = {106766}, type = {Article}, abstract = {

An efficient molybdenum-niobium-oxide nanomaterial was synthesized by a one-pot hydrothermal method for selective C-O (glycerol ketalization) and C-N coupling (benzylamine oxidation) reactions. The catalytically favourable properties, such as defective metal sites, truncated surfaces, and uniform metal dispersion in the MoO3-Nb2O5 nanorods, calcined at 500 degrees C (MoNb OPS-5), were confirmed by Raman, HR-TEM, and STEM-EDX, respectively. Because of improved Lewis/Bronsted acidic strength, the MoNb OPS-5 catalyst showed higher activity in glycerol ketalization and benzylamine oxidation at mild conditions, giving superior selectivity to solketal (97\%) and dibenzylimine (99\%), respectively. The MoNb OPS-5 catalyst showed high structural stability and considerable good reusability efficacy.

}, keywords = {C-O and C-N coupling, Glycerol and benzylamine, Mo-Nb-O nanocatalyst, nanocatalysts, One-pot hydrothermal synthesis}, issn = {1566-7367}, doi = {10.1016/j.catcom.2023.106766}, author = {Kalbande, Pavan Narayan and Singh, Nittan and Swapna, Bhattu and Umbarkar, Shubhangi and Sudarsanam, Putla} } @article {48469, title = {Photocatalytic setup for in situ and operando ambient-pressure X-ray photoelectron spectroscopy at MAX IV Laboratory}, journal = {Journal of Synchrotron Radiation}, volume = {30}, year = {2023}, month = {MAY}, pages = {613-619}, type = {Article}, abstract = {

The Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) endstation at the SPECIES beamline at MAX IV Laboratory has been improved. The latest upgrades help in performing photo-assisted experiments under operando conditions in the mbar pressure range using gas and vapour mixtures whilst also reducing beam damage to the sample caused by X-ray irradiation. This article reports on endstation upgrades for APXPS and examples of scientific cases of in situ photocatalysis, photoreduction and photo-assisted atomic layer deposition (photo-ALD).

}, keywords = {APXPS, photo-ALD, Photocatalysis, solar simulator}, issn = {0909-0495}, doi = {10.1107/S1600577523002801}, author = {Klyushin, Alexander and Ghosalya, Manoj and Kokkonen, Esko and Eads, Calley and Jones, Rosemary and Nalajala, Naresh and Gopinath, Chinnakonda S. and Urpelainen, Samuli} } @article {48291, title = {Short review on recent advances in porous adsorbents for separation of oxygen from atmospheric air}, journal = {Asia-Pacific Journal of Chemical Engineering}, volume = {18}, year = {2023}, month = {MAR}, type = {Review}, abstract = {

Pure oxygen demand is continuously increasing worldwide due to wide applications including medical and industrial. Pressure swing adsorption (PSA) is one of the promising techniques to separate O-2 from atmospheric air. The porous solid adsorbent is a key element in the PSA to trap nitrogen (N-2) and release O-2. Several adsorbents including low silica X (LSX), zeolite 5A, ion-exchanged LSX (Li-LSX, AgLi-LSX, Ca-LSX), Engelhard titanosilicate (Na-ETS-10, Ag-ETS-10), and SSZ-13 have been investigated for adsorption of N-2 from the air. This review article is a summarization of recent research work published on O-2 separation using different porous adsorbents via PSA. This review also emphasizes on the best porous sorbent for purification of O-2 by sorption of N-2 and Ar. The adsorption capacities with experimental conditions are also rigorously discussed. The review also proposed future trends and prospects for O-2 separation. This review will be helpful to choose remarkable adsorbent for the generation pure O-2.

}, keywords = {13X zeolite, adsorbent, ETS-10, oxygen, Separation}, issn = {1932-2135}, doi = {10.1002/apj.2896}, author = {Shrotri, Aadesh R. R. and Niphadkar, Prashant S. S. and Bokade, Vijay V. V. and Utgikar, Vivek P. P. and Nandanwar, Sachin U. U.} } @article {48672, title = {Systematic study of rare-earth ions size-dependent structural phase transition from monazite to zircon-type in rare earth chromates using Raman spectroscopy}, journal = {Journal of Raman Spectroscopy}, volume = {54}, year = {2023}, month = {JUL}, pages = {793-801}, type = {Article}, abstract = {

Rare earth chromates (RCrO4) undergo monazite to zircon-type structural phase transition due to a decreased rare-earth ion size. They also exhibit an intermediate mixed phase. However, there is no systematic study on the influence of structural distortion on their phononic behavior, which is quite sensitive to subtle environmental variations. A change in the room temperature phononic spectrum was studied in the family of RCrO4 compounds, where R was varied from La to Yb using Raman modes. With an increase in the atomic number from Nd to Yb for zircon-type phases, the external translational and rotational modes were observed to shift towards lower and higher wavenumbers, respectively. At the same time, all internal vibrational modes shifted towards higher phonon energies. A comparison between Raman modes for monazite, intermediate, and zircon-type RCrO4 phases showed a gradual shift in the internal modes towards a higher wavenumber. The confirmation of the change in Raman modes with the decreasing radius was found by comparing the rare-earth elements in DyCrO4 and LaCrO4 with non-rare-earth elements in YCrO4.

}, keywords = {monazite-type, Raman spectroscopy, rare earth chromates (RCrO4), YCrO4, zircon type}, issn = {0377-0486}, doi = {10.1002/jrs.6542}, author = {Ughade, Supriya and Poddar, Pankaj} } @article {48758, title = {Thermally activated delayed fluorescent solvent-free organic liquid hybrids for tunable emission applications}, journal = {Chemistry-An Asian Journal}, volume = {18}, year = {2023}, month = {JUL }, type = {Article}, abstract = {

The synthetic feasibility and excellent luminescence features of organic molecules attracted much attention and were eventually found useful in lighting applications. In this context, a solvent-free organic liquid having attractive thermally activated delayed fluorescence features in bulk along with high processability has prime importance. Herein, we report a series of naphthalene monoimide-based solvent-free organic liquids exhibiting cyan to red thermally activated delayed fluorescence with luminescence quantum yields up to 80\% and lifetimes between 10 to 45 mu s. An effective approach explored energy transfer between liquid donors with various emitters exhibiting tunable emission colors, including white. The high processability of liquid emitters improved the compatibility with polylactic acid and was used for developing multicolor emissive objects using 3D printing. Our demonstration of the thermally activated delayed fluorescence liquid will be much appreciated as a processable alternate emissive material suitable for large-area lighting, display, and related applications.

}, keywords = {3D printing, Energy Transfer, OLED, Organic Liquids, TADF}, issn = {1861-4728}, doi = {10.1002/asia.202300276}, author = {Nidhankar, Aakash D. D. and Goudappagouda and Kothavade, Premkumar D. and Dongre, Sangram D. and Veer, Sairam Dnyaneshwar and Dash, Soumya Ranjan and Rajeev, Kavya and Unni, K. N. Narayanan and Shanmuganathan, Kadhiravan and Babu, Sukumaran Santhosh} } @article {48455, title = {Ultrafast spectroscopy of plasmons and free carriers in 2D MXenes}, journal = {Advanced Materials}, volume = {35}, year = {2023}, month = {FEB}, type = {Article}, abstract = {

2D MXenes have diverse and chemically tunable optical properties that arise from an interplay between free carriers, interband transitions, and plasmon resonances. The nature of photoexcitations and their dynamics in three different members of the MXene family, Ti3C2, Mo2Ti2C3, and Nb2C, are investigated using two complementary pump-probe techniques, transient optical absorption, and time-resolved terahertz (THz) spectroscopy. Measurements reveal pronounced plasmonic effects in the visible and near-IR in all three. Optical excitation, with either 400 or 800 nm pulses, results in a rapid increase in lattice temperature, evidenced by a pronounced broadening of the plasmon mode that presents as a plasmon bleach in transient absorption measurements. Observed kinetics of plasmon bleach recovery provide a means to monitor lattice cooling. Remarkably slow cooling, proceeding over hundreds of picoseconds to nanoseconds time scales, implies MXenes have low thermal conductivities. The slowest recovery kinetics are observed in the MXene with the highest free carrier density, viz. Ti3C2, that supports phonon scattering by free carriers as a possible mechanism limiting thermal conductivity. These new insights into photoexcitation dynamics can facilitate their applications in photothermal solar energy conversion, plasmonic devices, and even photothermal therapy and drug delivery.

}, keywords = {2D properties, MXenes, Optical properties, plasmons, ultrafast spectroscopy}, issn = {0935-9648}, doi = {10.1002/adma.202208659}, author = {Colin-Ulloa, Erika and Fitzgerald, Andrew and Montazeri, Kiana and Mann, Javery and Natu, Varun and Ngo, Ken and Uzarski, Joshua and Barsoum, Michel W. and Titova, Lyubov V.} }