@article {42471, title = {1,4-Dipolar cycloaddition in organic synthesis: a facile route to isoquinoline fused heterocycles}, journal = {Arkivoc}, volume = {2005}, year = {2005}, month = {JAN}, pages = {178-188}, type = {Article}, abstract = {

The three component condensation reactions involving isoquinoline, dimethyl acetylenedicarboxylate and carbonyl dipolarophiles such as o- and p-benzoquinones and Nsubstituted isatins constitute a one-pot synthesis of a variety of [1,3]oxazino isoquinoline derivatives via 1,4-dipolar cycloaddition.

}, author = {Nair, Vijay and Sreekanth, Anakkalil R. and Abhilash, N. and Biju, Akkattu T. and Varma, Luxmi and Viji, Sreemathi and Mathew, Saumini} } @article { ISI:000232141000038, title = {Assessing the role of FecB mutation in productivity of Indian sheep}, journal = {Current Science}, volume = {89}, number = {5}, year = {2005}, month = {SEP}, pages = {887-890}, publisher = {CURRENT SCIENCE ASSN}, type = {Article}, address = {C V RAMAN AVENUE, PO BOX 8005, BANGALORE 560 080, INDIA}, abstract = {

DNA samples from four Indian sheep breeds, viz. Garole, Deccani, Bannur and Madras Red were screened by PCR-RFLP to determine the presence of FecB mutation in these breeds. The Garole was the only breed, which carried the FecB mutation. The FecB mutation was introgressed from Garole sheep into Deccani sheep and Bannur sheep, and the performance of the crossbred sheep is being monitored in subsequent generations. Approximately half of the first backcross ewes (progeny of FecB heterozygote F1 rams) was found to carry one copy of FecB mutation, as expected. The FecB PCR-RFLP test was found to be fast, accurate and useful as a tool for making breeding decisions.

}, keywords = {FecB (Booroola) gene, Garole sheep, PCR-RFLP test, prolificacy}, issn = {0011-3891}, author = {Pardeshi, V. C. and Sainani, Mohini N. and Maddox, J. F. and Ghalsasi, P. M. and Nimbkar, C. and Gupta, V. S.} } @article { ISI:000227581000010, title = {Asymmetric synthesis of aryloxypropanolamines via OsO4-catalyzed asymmetric dihydroxylation}, journal = {Tetrahedron}, volume = {61}, number = {11}, year = {2005}, month = {MAR}, pages = {2831-2838}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A simple and effective procedure for the enantioselective synthesis of several beta-adrenergic blocking agents incorporating the first asymmetric synthesis of celiprolol, is described. The key steps are (i) sharpless asymmetric dihydroxylation of aryl allyl ethers to introduce chirality into the molecules and (ii) conversion of cyclic sulfates into the corresponding epoxides using a three-step procedure. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {antihypertensive, asymmetric dihydroxylation, cyclic sulfates, epoxides}, issn = {0040-4020}, doi = {10.1016/j.tet.2005.01.074}, author = {Sayyed, I. A. and Thakur, V. V. and Nikalje, M. D. and Dewkar, Gajanan and Kotkar, S. P. and Sudalai, A.} } @article { ISI:000228743500063, title = {Comparison of the pervaporation separation of a water-acetonitrile mixture with zeolite-filled sodium alginate and poly(vinyl alcohol)-polyaniline semi-interpenetrating polymer network membranes}, journal = {Journal of Applied Polymer Science}, volume = {96}, number = {5}, year = {2005}, month = {JUN}, pages = {1968-1978}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

The pervaporation (PV) separation performance of ZSM-5- and Na-Y-type zeolite-filled sodium alginate (NaAlg) membranes were compared with those of pure NaAlg and semi-interpenetrating polymer network (semi-IPN) membranes of poly(vinyl alcohol) (PVA) with polyaniline (PANI) for the dehydration of acetonitrile. The PV separation characteristics of the zeolite-filled membranes showed a dependence on the nature of the zeolites. The variation of the acidity function of the ZSM-5 zeolite had an influence on the flux and selectivity of the membranes when compared to unfilled membranes. The crosslinked membranes were characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy. Increasing the PANI content of the semi-IPN network increased the separation selectivity. Among the NaAlg membranes, the plain NaAlg membrane showed the highest selectivity of 414 at 30 mass \% water in the feed mixture, whereas the Na-Y- and ZSM-5 (40)-filled NaAlg membranes exhibited much lower values of selectivity, that is, 7.3 and 4.3, respectively for 30 mass \% water in the feed. When the flux and selectivity data of ZSM-5 (250)-filled NaAlg membranes were compared with that of Na-Y- or ZSM-5 (40)-filled NaAlg membranes, a noticeable increase in the selectivity for the ZSM-5 (250)filled NaAlg membrane was observed, but a somewhat comparable flux was observed compared to the plain NaAlg membrane. For the first time, PANI was polymerized with PVA to yield a semi-IPN. The total flux and water flux increased systematically, whereas the selectivity decreased greatly from 251.87 to 5.95 with increasing amounts of water in the feed. (c) 2005 Wiley Periodicals, Inc.

}, keywords = {Diffusion, interpenetrating network (IPN), zeolites}, issn = {0021-8995}, doi = {10.1002/app.21653}, author = {Naidu, B. V. K. and Bhat, S. D. and Sairam, M. and Wali, A. C. and Sawant, D. P. and Halligudi, Shivaraj B. and Mallikarjuna, N. N. and Aminabhavi, Tejraj M.} } @article { ISI:000227447800012, title = {Coprecipitation technique to prepare BaNb2O6}, journal = {Materials Science and Engineering B-Solid State Materials for Advanced Technology}, volume = {117}, number = {2}, year = {2005}, month = {MAR}, pages = {169-171}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A mixture of ammonium oxalate and ammonium hydroxide was used to coprecipitate barium and niobium ions as barium oxalate and niobium hydroxide under basic conditions. This precursor on calcination at 750degreesC yielded BaNb2O6 ceramics. This is a much lower temperature as compared to that prepared by traditional solid-state method (1000degreesC), as reported for the formation of BaNb2O6. Transmission electron microscope (TEM) investigations revealed that the average particle size is 100 nm for the calcined powders. The room temperature dielectric constant at 1 kHz is found to be 1100. The ferroelectric hysteresis loop parameters of these samples were also studied. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Ammonia, Ceramics, Electron microscopy, niobium oxide, Oxides}, issn = {0921-5107}, doi = {10.1016/j.mseb.2004.11.009}, author = {Natarajan, N and Samuel, V and Pasricha, R and Ravi, V} } @article { ISI:000229811300003, title = {Coprecipitation technique to prepare ZnM2O6 powders}, journal = {Bulletin of Materials Science}, volume = {28}, number = {3}, year = {2005}, month = {JUN}, pages = {205-207}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A simple coprecipitation technique was successfully applied for the preparation of pure ultrafine single phase, ZnNb2O6 (ZN). Ammonium hydroxide was used to precipitate Zn2+ and Nb5+ cations as hydroxides simultaneously. This precursor on heating at 750 degrees, produced ZN powders. For comparison, ZN powders were also prepared by the traditional solid state method. The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD). Particle size and morphology were studied by transmission electron spectroscopy (TEM).

}, keywords = {Ceramics, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0250-4707}, doi = {10.1007/BF02711248}, author = {Deshpande, V. V. and Patil, M. M. and Navale, S. C. and Ravi, V.} } @article { ISI:000232743700020, title = {Direct synthesis of well-ordered and unusually reactive FeSBA-15 mesoporous molecular sieves}, journal = {Chemistry of Materials}, volume = {17}, number = {21}, year = {2005}, month = {OCT}, pages = {5339-5345}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Large-pore hexagonal SBA-15 molecular sieves partially substituted with iron(III) have been synthesized for the first time in highly acidic media. The degree of iron(III) incorporation into SBA-15 can easily be controlled by a simple adjustment of the molar ratio of water and hydrochloric acid. All the materials have been characterized by XRD, N-2 adsorption, UV-Vis DRS, ESR, and XANES spectroscopy. The characterization of the FeSBA-15 materials by UV-Vis DRS, ESR, and XANES spectroscopies suggests that the iron atoms are highly dispersed and mostly occupy isolated tetrahedral sites. XANES studies revealed that the proportion of tetrahedrally coordinated Fe atoms decreases with decreasing n(Si)/n(Fc) ratios. Benzylation of benzene (or substituted benzenes) using benzyl chloride as the alkylating agent over FeSBA-15 with different n(Si)/n(Fe) ratios was investigated as was the same reaction using AISBA-15 as catalyst. The influence of parameters such as reaction temperature, reactant feed ratio, and the presence of electron-donating substituents on the activity and selectivity of AISBA-15 was studied. Under optimized reaction conditions, the FeSBA-15 catalyst showed a superior catalytic performance in the benzylation of benzene and other aromatics using benzyl chloride, with a clean conversion of benzyl chloride to the monoalkylated product (100\% selectivity) with a very high rate constant when compared to other mesoporous materials such as AISBA-15 and FeHMS. Interestingly, use of FeSBA-15(21) resulted in quantitative conversion of benzyl chloride with a high rate constant of 2420.5 x 10(-4) min(-1) under the optimized reaction conditions.

}, issn = {0897-4756}, doi = {10.1021/cm050883z}, author = {Vinu, A. and Sawant, D. P. and Ariga, Katsuhiko and Hossain, K. Z. and Halligudi, Shivappa B. and Hartmann, Martin and Nomura, M.} } @article { ISI:000227928200058, title = {Efficient total synthesis of sapinofuranone B}, journal = {Journal of Organic Chemistry}, volume = {70}, number = {7}, year = {2005}, month = {APR}, pages = {2843-2846}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient enantioselective synthesis of sapinofuranone B (1) using Sharpless asymmetric dihydroxylation, Sonogashira coupling, and Wittig olefination as the key steps is described.

}, issn = {0022-3263}, doi = {10.1021/jo048087k}, author = {Kumar, P and Naidu, SV and Gupta, P} } @article { ISI:000231661800039, title = {Enantioselective synthesis of tarchonanthuslactone via iterative hydrolytic kinetic resolution}, journal = {Tetrahedron Letters}, volume = {46}, number = {38}, year = {2005}, month = {SEP}, pages = {6571-6573}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short and practical enantioselective synthesis of tarchonanthuslactone has been achieved in high diastereomeric excess using iterative Jacobsen{\textquoteright}s hydrolytic kinetic resolution and ring closing metathesis as the key steps. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Jacobsen{\textquoteright}s hydrolytic kinetic resolution, Ring closing metathesis, tarchonanthuslactone}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.07.056}, author = {Gupta, P and Naidu, SV and Kumar, P} } @article { ISI:000230023600015, title = {Expedient synthesis of 1,2,3-triazole-fused tetracyclic compounds by intramolecular Huisgen ({\textquoteright}click{\textquoteright}) reactions on carbohydrate-derived azido-alkynes}, journal = {Tetrahedron Letters}, volume = {46}, number = {27}, year = {2005}, month = {JUL}, pages = {4585-4588}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient, practical and convenient synthesis of 1,2,3-triazole-fused tetracyclic compounds was achieved by intramolecular 1,3-dipolar cycloaddition of carbohydrate-derived azido-alkynes. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {carbohydrates, Click chemistry, Cycloaddition, diversity oriented synthesis, Huisgen reaction}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.05.012}, author = {Hotha, Srinivas and Anegundi, Ramakrishna I. and Natu, A. A.} } @article { ISI:000231018800006, title = {Immobilization of metallporphyrins on polystyrene: efficient catalysts for aerobic oxidation of alcohols}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {238}, number = {1-2}, year = {2005}, month = {SEP}, pages = {46-50}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Metalloporphyrins of iron and cobalt have been successfully encapsulated for the first time using polystyrene matrix, exhibiting high activity for aerobic oxidation of alcohols mimicking cytochrome P-450 dependent mono oxygenases. This communication provides a simple and environmentally friendly protocol for immobilization of metalloporphyrins (MPs) on to polystyrenes in general, which gives stable,I reusable (see Footnote 1) and efficient catalysts for aerobic oxidation of alcohols. These catalysts were characterized by UV-vis as well as diffuse reflectance FT-IR spectroscopy. These catalysts not only have high turnover frequencies but also could be recovered quantitatively by simple filtration and reused without loss of activity. Considering their high dispersing capacity in organic solvents, they will definitely find broad spectrum of applications in the electronic as well as optical fields. This methodology will lead to a potential model to mimic the catalytic action of metalloporphyrins in the niche areas such as catalytic oxidations, drug metabolism, DNA cleavage, photodynamic therapy and many others. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {aerobic oxidation, Immobilization, metalloporphyrins, micro-encapsulation, Polystyrene, turnover frequency}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.04.041}, author = {Naik, R. and Joshi, P. and Deshpande, R. K.} } @conference { ISI:000234827500072, title = {Influence of Sn- and Al- metal sources on post-synthesis modification of mesoporous SBA-15 molecular sieves}, booktitle = {3rd Conference of the Federation-of-European-Zeolite-Association}, series = {Studies in Surface Science and Catalysis}, volume = {158}, number = {A-B}, year = {2005}, note = {3rd Conference of the Federation-of-European-Zeolite-Association, Prague, CZECH REPUBLIC, AUG 23-29, 2005}, month = {AUG}, pages = {565-572}, publisher = {Elsevier Science BV, Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, organization = {Elsevier Science BV, Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, address = {Prague, Czech Republic}, abstract = {

Mesoporous silica SBA-15 has been incorporated with various amounts of Sn and Al by post synthesis grafting technique, which results in excellent structural integrity and enhanced acidity. Physico-chemical characterization was done by various spectroscopic methods to understand the chemical nature of incorporated Sn and Al. XRD and BET results show that the hexagonal structural of the SBA-15 is maintained during the grafting with no loss of long range structure ordering. (119)Sn NMR Spectrum shows the presence of Sri in essentially octahedral environment, while 27 Al MAS NMR results confirm that a large proportion of the Al is in tetrahedral position. The resulting Sn and Al-grafted materials possess considerable catalytic activity in the transesterification of diethylmalonate (medium acidity) and isopropylation of naphthalene (strong acid sites), respectively.

}, isbn = {0-444-52082-1}, issn = {0167-2991}, author = {Shah, P and Ramaswamy, AV and Ramaswamy, V}, editor = {Cejka, J and Zilkova, N and Nachtigall, P} } @article { ISI:000231401000011, title = {In-Mg-hydrotalcite anionic clay as catalyst or catalyst precursor for friedel-crafts type benzylation reactions}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {239}, number = {1-2}, year = {2005}, month = {SEP}, pages = {76-81}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In-Mg-hydrotalcite (Mg/In = 3) anionic clay with or without calcination (at 200-800 degrees C) or HCl pretreatment at different temperatures (26 and 80 degrees C) and periods (0.1 or 1.0 h) has been used for the benzylation of benzene and/or substituted benzenes by benzyl chloride. The hydrotalcite before and after its calcination or HCl pretreatment was characterized for its surface area, crystalline phases and basicity. The hydrotalcite particularly after its use in the benzylation reaction, and the catalyst derived from it by its calcination at 800 degrees C followed by HCl pretreatment (at 80 degrees C for 1.0 h), shows high catalytic activity even for the benzylation of benzene. The catalytically active species present in the catalyst in its most active form are the chlorides and oxides of indium on the catalyst surface. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {activation of In-Mg-hydrotalcite by calcination, activation of In-Mg-hydrotalcite by HCl pretreatment, benzylation of benzene, benzylation of substituted benzenes, In-Mg-hydrotalcite}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.06.003}, author = {Choudhary, Vasant R. and Jha, Rani and Narkhede, V. S.} } @article { ISI:000232864800029, title = {Low temperature synthesis of MgTa2O6 powders}, journal = {Materials Letters}, volume = {59}, number = {29-30}, year = {2005}, month = {DEC}, pages = {3926-3928}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A combination of digestion and further low temperature calcination to crystallize the product is employed to prepare MgTa2O6 (MT) ceramics. Freshly prepared niobium hydroxide gel is mixed with magnesium hydroxide thoroughly and allowed to react at 100 degrees C under refluxing and stirring conditions for 6-12 h. The X-ray amorphous product so formed is heated at 550 degrees C to form crystalline MgTa2O6. This is the lowest temperature so far reported for the formation of MgTa2O6. For comparison, MT powders were also prepared by the traditional solid state method. Transmission electron microscope (TEM) investigations revealed that the average particle size is 40 nm for the low temperature calcined powders. (C) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Electron microscopy, magnesium tantalate, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.07.035}, author = {Navale, SC and Samuel, V and Ravi, V} } @article { ISI:000228596500024, title = {Matched asymptotic solution for flow in a semi-hyperbolic die}, journal = {Chemical Engineering Science}, volume = {60}, number = {11}, year = {2005}, month = {JUN}, pages = {3107-3110}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A semi-hyperbolic converging geometry finds application as an inexpensive elongation rheometer under certain flow conditions. We provide a matched asymptotic solution for the flow of a Newtonian fluid under no-slip boundary conditions. The predicted velocity and pressure profiles agree nearly quantitatively with CFD simulated values. Our theoretical approach has certain advantages over the known similarity solution proposed by James (1991. A.I.Ch.E. Journal 37, 59-64). (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {elongation viscosity, matched asymptotic solution, semi-hyperbolic}, issn = {0009-2509}, doi = {10.1016/j.ces.2004.12.043}, author = {Subramanian, G and Ranade, V and Nagarkar, S and Lele, Arundhati C.} } @article { ISI:000228743500067, title = {Miscibility of chitosan-hydroxyethylcellulose blends in aqueous acetic acid solutions at 35 degrees C}, journal = {Journal of Applied Polymer Science}, volume = {96}, number = {5}, year = {2005}, month = {JUN}, pages = {1996-1998}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

The miscibility of blends of chitosan and hydroxyethylcellulose in a 2\% acetic acid solution was studied by viscometry, densitometry, and refractometry at 35 degrees C. The data suggest that the blends were completely miscible in all proportions. Further, the membranes were fabricated from concentrated blend solutions. The solid-state compatibility of the blends was confirmed by scanning electron microscopy. (c) 2005 Wiley Periodicals, Inc.

}, keywords = {blends, miscibility, refractive index, viscosity}, issn = {0021-8995}, doi = {10.1002/app.21421}, author = {Wali, A. C. and Naidu, B. V. K. and Mallikarjuna, N. N. and Sainkar, S. R. and Halligudi, Shivaraj B. and Aminabhavi, Tejraj M.} } @article { ISI:000232103800003, title = {Mitochondrial sequence reveals high levels of gene flow between breeds of domestic sheep from Asia and Europe}, journal = {Journal of Heredity}, volume = {96}, number = {5}, year = {2005}, month = {SEP}, pages = {494-501}, publisher = {OXFORD UNIV PRESS INC}, type = {Article}, address = {JOURNALS DEPT, 2001 EVANS RD, CARY, NC 27513 USA}, abstract = {

Sequence variation present within the mitochondrial genome was used to investigate genetic diversity within sheep breeds from Asia and Europe. Comparison of 2027 bp of sequence from 121 animals revealed 44 phylogenetically informative nucleotide positions and a single insertion/deletion. A total of 57 haplotypes were observed which formed two distinct clades. Type A haplotypes were found in breeds from Asia (India, Indonesia, Mongolia, and Tibet), while type B haplotypes were observed at the highest frequency in breeds sourced from Europe (nine breeds from Austria, angstrom land, Finland, Spain, and northwestern Russia). The distribution of haplotypes indicates sheep appear to have the weakest population structure and the highest rate of intercontinental dispersal of any domestic animal reported to date. Only 2.7\% of the sequence variation observed was partitioned between continents, which is lower than both goat (approximately 10\%) and cattle (approximately 50\%). Diagnostic restriction fragment length polymorphism polymerase chain reaction (RFLP-PCR) tests which distinguish type A and B haplotypes were used to test an additional 223 animals from 17 breeds of European and Asian origin. A mixture of the two lineages was found in every breed except Suffolk and the Indian Garole, indicating introgression has played a major part during breed development and subsequent selection.

}, issn = {0022-1503}, doi = {10.1093/jhered/esi100}, author = {Meadows, J. R. S. and Li, K. and Kantanen, J. and Tapio, M. and Sipos, W. and Pardeshi, V. and Gupta, V. and Calvo, J. H. and Whan, V. and Norris, B. and Kijas, J. W.} } @article { ISI:000231486900018, title = {Modeling of vaporization and cracking of liquid oil injected in a gas-solid riser}, journal = {Chemical Engineering Science}, volume = {60}, number = {22, SI}, year = {2005}, note = {7th International Conference on Gas-Liquid and Gas-Liquid-Solid, Strasbourg, FRANCE, FEB, 2005}, month = {NOV}, pages = {6049-6066}, publisher = {Chem Engn Grp Nancy}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Vaporization and cracking of liquid oil injected in a gas-solid riser (fluid catalytic cracking riser reactor) was computationally studied in this work. Evaporation of a single drop injected in a stream of gas-solid mixture was analyzed first. A model for simulating evaporation of a drop considering heat transfer from the gas phase as well as from the solid particles was developed. The model relates the evaporation rate of droplet with rate of collisions of solid particles, specific heat capacities of solid and liquid, latent heat of vaporization, relative velocity of gas and liquid and temperatures of three phases. The understanding gained from such a model was then extended to simulate evaporation of liquid drops injected in FCC risers. The Eulerian-Lagrangian approach was used to simulate simultaneous evaporation and cracking reactions occurring in FCC riser reactors. A commercial CFD code, FLUENT (of Fluent Inc., USA) was used. Four and ten lump models were used for simulating cracking reactions. Appropriate user defined functions were developed to implement heterogeneous kinetics and heat transfer models in FLUENT. A special algorithm was developed to calculate accumulated coke on catalyst particles. A boiling point range was considered for simulating realistic oil feedstock. The model was first evaluated by comparing predicted results with published industrial data. The simulations were then carried out to understand influence of key design and operating parameters on performance of FCC riser reactors. The parameters studied included; initial oil droplet distribution, catalyst inlet temperature, catalyst to oil ratio and thermal cracking. The approach, model and results presented here would be useful for optimization of FCC operation, cost to benefit analysis of new FCC nozzles and related decision-making. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {cracking reactions, Evaporation, FCC, heat transfer, riser}, issn = {0009-2509}, doi = {10.1016/j.ces.2005.04.046}, author = {Nayak, S. V. and Joshi, S. L. and Ranade, V. V.} } @article { ISI:000234827500083, title = {Molecular dynamics simulations of H2O with sites of Cu-I-FAU and Cu-II-FAU}, journal = {Studies in surface science and catalysis }, volume = {158}, number = {A-B}, year = {2005}, note = {3rd Conference of the Federation-of-European-Zeolite-Association, Prague, CZECH REPUBLIC, AUG 23-29, 2005}, month = {OCT}, pages = {655-662}, publisher = {Elsevier Science}, type = {Article, Proceedings Paper}, address = {Prague, Czech Republic}, abstract = {

A Born Oppenheimer molecular dynamic (BOMD) approach was chosen to study the interaction of water molecules with Cu-FAU models. We have compared the reactivity of Cu-I and Cu-II with the zeolite and compared the results to those calculated for Na. This Study shows a decrease of the coordination with time for Cu-I whereas there is not a significant change for Cu-II. BOMD shows also that, in the presence of water, Na+ may lead to easier cation exchange than for transition metal cations.

}, isbn = {0-444-52082-1}, issn = {0167-2991}, doi = {10.1016/S0167-2991(05)80397-0}, author = {Berthomieu, D. and Krishnamurty, S. and Heine, Thomas and Goursot, A.}, editor = {Cejka, J. and Zilkova, N. and Nachtigall, P.} } @article { ISI:000232598600005, title = {Molecular mapping of stem and leaf rust resistance in wheat}, journal = {Theoretical and Applied Genetics}, volume = {111}, number = {5}, year = {2005}, month = {SEP}, pages = {846-850}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

Stem rust caused by Puccinia graminis f. sp. tritici Eriks and Henn and leaf rust caused by Puccinia triticina Rob. ex Desm. are major constraints to wheat production worldwide. In the present study, F-4-derived SSD population, developed from a cross between Australian cultivars {\textquoteleft}Schomburgk{\textquoteright} and {\textquoteleft}Yarralinka{\textquoteright}, was used to identify molecular markers linked to rust resistance genes Lr3a and Sr22. A total of 1,330 RAPD and 100 ISSR primers and 33 SSR primer pairs selected on the basis of chromosomal locations of these genes were used. The ISSR marker UBC 840(540) was found to be linked with Lr3a in repulsion at a distance of 6.0 cM. Markers cfa2019 and cfa2123 flanked Sr22 at a distance of 5.9 cM (distal) and 6.0 cM (proximal), respectively. The use of these markers in combination would predict the presence or absence of Sr22 in breeding populations. A previously identified PCR-based diagnostic marker STS638 linked to Lr20 was validated in this population. This marker showed a recombination value of 7.1 cM with Lr20.

}, issn = {0040-5752}, doi = {10.1007/s00122-005-0005-4}, author = {Khan, R. R. and Bariana, Harbans S. and Dholakia, Bhushan B. and Naik, S. V. and Lagu, Meena D. and Rathjen, A. J. and Bhavani, Sridhar and Gupta, V. S.} } @article { ISI:000229103900015, title = {Nanostructured tin oxide: synthesis and gas-sensing properties}, journal = {Materials Chemistry and Physics}, volume = {92}, number = {2-3}, year = {2005}, month = {AUG}, pages = {384-388}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Pure and Ru-doped nanostructured SnO2 sensing materials were synthesized using a modified Pechini route. Incorporation of Ru in SnO2 results in the reduction of particle size (8.3 nm) compared with that of the pure SnO2 (28.2 nm). Moreover, the sensor exhibited a reasonably good sensitivity towards both H-2 and liquified petroleum gas (LPG). The effect of Ru incorporation, operating temperature, and gas concentration on the structure, morphology, and sensitivity is discussed using the results of X-ray diffraction (XRD), and scanning electron microscopy (SEM) along with sensing performance. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {hydrogen and hydrocarbon sensor, Nanostructure, ruthenium, tin oxide}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.01.050}, author = {Niranjan, R. S. and Hwang, Young Kyu and Kim, D. K. and Jhung, S. H. and Chang, J. S. and Mulla, Imtiaz S.} } @article { ISI:000232815200010, title = {Novel enzymatic route for kinetic resolution of (+/-)1,4-benzodioxan-2-carboxylic acid}, journal = {Biochemical Engineering Journal}, volume = {27}, number = {1}, year = {2005}, month = {DEC}, pages = {66-71}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {Ethyl 1,4-benzodioxan-2-carboxylate is used as an intermediate compound for the production of drug doxazosin mesylate. The title compound was kinetically resolved to get S-enantiomer of ethyl 1,4-benzodioxan 2-carboxylate in a simple lipase catalyzed transesterificafion reaction. Ethyl acetate was used as reaction medium as well as acyl donor. The influence of the enzyme source and time of reaction on the enantio selectivity of product were studied. Lipase from Candida antartica-B (Novozyme A/S) catalyzed transesterification reaction with good enantio selectivity towards S-enantiomer. The high enantiomeric ratio, E= 160, provided S-2 an acceptable chemical yield (50\%) and enaritiomeric excess (>95\%). (c) 2005 Elsevier B.V. All rights reserved.}, keywords = {1, 4-benzodioxan-2-carboxylate, 4-benzodioxan-2-carboxylic acid, doxazosin, enantio selectivity, enantiomeric ratio, ethyl 1, ethyl acetate, Lipases, transesterfication}, issn = {1369-703X}, doi = {10.1016/j.bej.2005.06.014}, author = {Kasture, Sangita M. and Varma, R and Kalkote, Uttam R. and Nene, S and Kulkarni, Bhaskar D.} } @article { ISI:000227273200009, title = {Novel one-pot synthesis of 2-Aryl-4(3H)-quinazolinones using room temperature ionic liquid as reaction medium as well as promoter}, journal = {Synthetic Communications}, volume = {35}, number = {2}, year = {2005}, month = {JUL}, pages = {231-241}, publisher = {MARCEL DEKKER INC}, type = {Article}, address = {270 MADISON AVE, NEW YORK, NY 10016 USA}, abstract = {

An efficient one-pot synthesis of 2-aryl-4(3H)-quinazolinones from 2-amino benzamides and substituted benzoyl chlorides in a room temperature ionic liquid is described. Compared with the classical reaction conditions, this new synthetic method has the advantages of recyclability of ionic liquid, very good to excellent yields (78-92\%), the absence of hazardous and expensive catalysts, and easy workup procedures giving rise to a process with minimum waste.

}, keywords = {2-amino benzamide, 2-aryl-4(3H)-quinazolinones, benzoyl chlorides, Ionic liquid}, issn = {0039-7911}, doi = {10.1081/SCC-200048433}, author = {Potewar, T. M. and Nadaf, R. N. and Daniel, Thomas and Lahoti, Rajgopal J. and Srinivasan, K. V.} } @article {42470, title = {One pot four component reaction of isocyanides, dimethyl acetylenedicarboxylate and cyclobutene-1,2-diones: synthesis of spiro heterocycles}, journal = {Tetrahedron Letters}, volume = {48}, year = {2005}, month = {JAN}, pages = {1337{\textendash}1339}, abstract = {

Isocyanides, dimethyl acetylenedicarboxylate, and cyclobutene-1,2-diones react in one-pot to afford novel spirocyclic compounds with double insertion of the isocyanide.

}, doi = {10.1016/j.tetlet.2004.12.117.}, author = {Nair, Vijay and Menon, Rajeev S. and Deepthi, Ani B. and Devi, Rema and Biju, Akkattu T.} } @article { ISI:000234204300019, title = {Oriented growth of nanocrystalline gamma ferric oxide in electrophoretically deposited films}, journal = {Hyperfine Interactions}, volume = {160}, number = {1-4}, year = {2005}, note = {International Workshop on Nanomaterials, Magnetic Ions and Magnetic Semiconductors Studies mostly by Hyperfine Interactions, M S Univ Baroda, Phys Dept, Baroda, INDIA, FEB 10-14, 2004}, month = {JAN}, pages = {199-209}, publisher = {Springer, Van Godewijckstraat 30, 3311 GZ Dordrecht, Netherlands}, type = {Article, Proceedings Paper}, address = { M S Univ Baroda, Phys Dept, Baroda, INDIA}, abstract = {

Films of nanocrystalline gamma-Fe2O3 were deposited on silicon substrates by using the technique of electrophoretic deposition. The precursor powder was nanocrystalline gamma-Fe2O3, which was synthesized, using DC arc plasma in the oxygen ambient by vapour-vapour interaction in gas phase condensation; at a stabilized arc current of 40 A. This powder was characterized by X-ray diffraction, Transmission Electron Microscopy, Vibrating Sample Magnetometer and Mossbauer Spectroscopy. An increase in directional coercivity was observed in case of films deposited on silicon substrates, which is dramatically significant. Preferred orientation of almost similar sized nanocrystalline magnetic domains in deposited films is evident from the results of X-ray diffraction and Transmission Electron Microscopy results. The preferred alignment of the nanocrystallites seems to be responsible for the significant changes observed in magnetic properties of films.

}, issn = {0304-3843}, doi = {10.1007/s10751-005-9165-5}, author = {Bhave, T. M. and Balasubramanian, C. and Nagar, H. and Kulkarni, S. and Pasricha, R. and Bakare, P. P. and Date, Sadgopal K. and Bhoraskar, S. V.} } @article { ISI:000228794300014, title = {Preparation of fine MgTa2O6 and Mg4Ta2O9 powders by chemical methods}, journal = {Materials Science and Engineering B-Solid State Materials for Advanced Technology}, volume = {119}, number = {2}, year = {2005}, month = {MAY}, pages = {189-191}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Two different chemical methods are applied to prepare MgTa2O6 (MT2) and Mg4Ta2O9 (M4T2) powders. A gel was formed when a aqueous solution of Mg(NO3)(2), TAF(5) and citric acid in stoichiometric ratio is heated on a water bath. This gel on decomposition at 750 degrees C produced the fine crystallites of ternary oxide, M4T2. A simple co-precipitation technique had been successfully applied for the preparation of pure ultrafine single phase MT2. Ammonium hydroxide was used to precipitate Mg2+ and Ta5+ cations as hydroxides simultaneously. This precursor on heating at 750 degrees produces MT2 powders. The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD). Particle size and morphology was studied by transmission electron microscopy (TEM). (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Electron microscopy, powders-chemical preparation, X-ray methods}, issn = {0921-5107}, doi = {10.1016/j.mseb.2005.02.058}, author = {Navale, SC and Ravi, V} } @article { ISI:000230275100022, title = {Preparation of nanocrystalline LiNbO3 by citrate gel method}, journal = {Materials Letters}, volume = {59}, number = {19-20}, year = {2005}, month = {AUG}, pages = {2476-2478}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A gel was formed when an aqueous solution of Li(NO3) NbF5 and citric acid in stoichiometric ratio is heated in a water bath at 100 degrees C. This gel on decomposition at 700 degrees C produced the fine crystallites of ternary oxide, LiNbO3 (LN). The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD). Particle size and morphology was studied by transmission electron spectroscopy (TEM). (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Electron microscopy, electronic materials, lithium niobate, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.03.028}, author = {Navale, SC and Samuel, V and Ravi, V} } @article { ISI:000231605600002, title = {Preparation of ultrafine LiTaO3 powders by citrate gel method}, journal = {Bulletin of Materials Science}, volume = {28}, number = {5}, year = {2005}, month = {AUG}, pages = {391-393}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A gel was formed when a aqueous solution of Li(NO3), TaF5 and citric acid in stoichiometric ratio was heated in a water bath. This gel on decomposition at 700 degrees C produced fine crystallites of ternary oxide, LiTaO3 (LT). The phase contents and lattice parameters were studied by powder X-ray diffraction (XRD). Particle size and morphology were studied by transmission electron spectroscopy (TEM).

}, keywords = {Ceramics, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0250-4707}, doi = {10.1007/BF02711224}, author = {Navale, SC and Samuel, V and Ravi, V} } @article {42472, title = {Reaction of diaryl-1,2-diones with triphenylphosphine and diethyl azodicarboxylate leading to N, N-dicarboethoxy monohydrazones via a novel rearrangement}, journal = {Organic Letters}, volume = {7}, year = {2005}, month = {MAY}, pages = {2121{\textendash}2123}, abstract = {

A mechanistically novel reaction of diaryl-1,2-diones with diethyl azodicarboxylate and triphenylphosphine to afford N,N-dicarboethoxy monohydrazones is described. The reaction proceeds via a nitrogen to nitrogen migration of a carboethoxy group.

}, doi = {10.1021/ol050403+}, author = {Nair, Vijay and Biju, Akkattu T. and Abhilash, K. G. and Menon, Rajeev S. and Eringathodi, Suresh} } @article {42473, title = {Reaction of huisgen zwitterion with 1,2-benzoquinones and isatins: expeditious synthesis of dihydro-1,2,3-benzoxadiazoles and spirooxadiazolines}, journal = {Organic Letters}, volume = {7}, year = {2005}, month = {OCT}, pages = {5139{\textendash}5142}, type = {Article}, abstract = {

The zwitterionic intermediate generated from dialkyl azodicarboxylate and triphenylphosphine on reaction with 3-methoxy-1,2-benzoquinones afforded dihydro-1,2,3-benzoxadiazoles. N-Substituted isatins furnished spirooxadiazolines under similar conditions.

}, doi = {10.1021/ol051956n}, author = {Nair, Vijay and Biju, Akkattu T. and Vinod, A. V. and Eringathodi, Suresh} } @article { ISI:000228575900026, title = {Ring-closing metathesis mediated total synthesis of microcarpalide and herbarumin III}, journal = {Arkivoc}, number = {3}, year = {2005}, month = {FEB}, pages = {237-257}, publisher = {ARKAT USA INC}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

Total synthesis of naturally occurring microcarpalide and herbarumin III are described. The ring-closing metathesis (RCM) approach to coin the medium sized rings present in their molecular structures form the basic premise of this investigation.

}, keywords = {herbarumin III, microcarpalide, microfilament, phosphodiesterase, ring-closing metathesis (RCM)}, author = {Gurjar, M. K. and Nagaprasad, R. and Ramana, C. V. and Karmakar, S. and Mohapatra, Debendra K.} } @article { ISI:000233062500003, title = {Role of a co-metal in bimetallic Ni-Pt catalyst for hydrogenation of m-dinitrobenzene to m-phenylenediamine}, journal = {Applied Catalysis A-General}, volume = {295}, number = {1}, year = {2005}, month = {OCT}, pages = {23-30}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ni-Pt catalysts supported on carbon were found to give very high turn over frequency numbers and almost complete selectivity to m-phenylenediamine in m-dinitrobenzene hydrogenation as compared to the monometallic nickel catalysts. The XRD and XPS characterization revealed that most of the nickel remains as Ni2+ in a monometallic catalyst while, the addition of platinum leads to the stabilization of Ni-0 state, in case of bimetallic catalysts. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic catalyst, Catalytic hydrogenation, m-dinitrobenzene, m-phenylenediamine, Selective hydrogenation, turn over number, XPS and XRD of nickel}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.07.050}, author = {Telkar, M. M. and Nadgeri, J. M. and Rode, C. V. and Chaudhari, R.} } @article { ISI:000227930800010, title = {Room temperature ionic liquid promoted improved and rapid synthesis of 2,4,5-triaryl imidazoles from aryl aldehydes and 1,2-diketones or alpha-hydroxyketone}, journal = {Tetrahedron}, volume = {61}, number = {14}, year = {2005}, month = {APR}, pages = {3539-3546}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An improved and rapid one-pot synthesis of 2,4,5-triaryl imidazoles in a room temperature ionic liquid is described, which does not need any added catalyst. Different ionic liquids based on 1-n-butyl and 1,3-di-n-butyl imidazolium salts were screened and their efficacy in terms of acidity and polarity have been correlated with yields and reaction period. The one-pot methodology resulting in excellent isolated yields in short reaction times is characterized by simple work up procedures and efficient recovery and recycling of the ionic liquid, which acts as a promoter. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {1, 2, 2-Diketones, 4, 5-triaryl imidazoles, alpha-hydroxyketone, ammonium acetate, benzaldehydes, ionic liquid (IL)}, issn = {0040-4020}, doi = {10.1016/j.tet.2005.01.116}, author = {Siddiqui, S. A. and Narkhede, U. C. and Palimkar, S. S. and Daniel, Thomas and Lahoti, Rajgopal J. and Srinivasan, K. V.} } @article { ISI:000227506100040, title = {Stereoselective synthesis of (+)-boronolide}, journal = {Tetrahedron Letters}, volume = {46}, number = {12}, year = {2005}, month = {MAR}, pages = {2129-2131}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantio- and stereocontrolled total synthesis of (+)-boronolide from valeralclehyde is described. The key steps include a Sharpless asymmetric dihydroxylation, a chelation controlled Grignard reaction followed by Sharpless asymmetric epoxidation and a ring closing metathesis. (C) 2005 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.01.120}, author = {Naidu, SV and Gupta, P and Kumar, P} } @article { ISI:000226466700032, title = {Studies on the crystallization behavior of nylon-6 in the presence of layered silicates using variable temperature WAXS and FTIR}, journal = {Macromolecules}, volume = {38}, number = {2}, year = {2005}, month = {JAN}, pages = {454-462}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The crystallization of nylon-6 clay nanocomposite was studied by variable temperature wide-angle X-ray scattering (WAXS) and Fourier transform infrared spectroscopy (FTIR). Nylon-6 was found to crystallize into gamma phase at 210 degreesC, as indicated by its characteristic peaks in WAXS. However, an additional peak was observed close but on the lower angle side of the main gamma phase peak, indicating the presence of a metastable phase. The extent of metastable phase that developed was dictated by the clay content in the nanocomposite as well as the crystallization conditions. The temperature dependence of the d spacing of the gamma phase obtained in the presence of clay layers showed difference from the gamma phase obtained by treating nylon-6 in KI/I-2 solution. Variable temperature FTIR studies were conducted on the gamma phases for the first time, and it showed definite differences in the spectra of the phases obtained by the two methods.

}, issn = {0024-9297}, doi = {10.1021/ma048860d}, author = {Nair, S. S. and Ramesh, C.} } @article { ISI:000234330700013, title = {Studies on the lactic-fermentation of sugar apple (Annona squamosa L.) puree}, journal = {Journal of Food and Drug Analysis}, volume = {13}, number = {4}, year = {2005}, month = {DEC}, pages = {377-381}, publisher = {NATL LABORATORIES FOODS DRUGS}, type = {Article}, address = {161-2 KUEN YANG STREET, NANKANG, TAIPEI, TAIWAN}, abstract = {

Sugar apple (Annona squamosa L.) is a fruit tree of economic importance in Taiwan, with the fruit primarily consumed fresh. Overproduction in recent years, coupled with short shelf life and other practical issues, make practical the research into uses for sugar apples in formats other than fresh. This study presents an exploration of lactic-fermented sugar apple products. The product has a unique sweet aroma and a test panel found its texture to be appealing. For this study, sugar apple puree was used as the substrate for fermentation using mixed starters in a ratio 1:1 or 1:1:1. The high total soluble solid nature (20.5 +/- 4.33 degrees Brix) of sugar apple puree as compared to that of mixed fruit juice (lower than 10 Brix) indicates its potential to be used in fermentation. Following fermentation, the properties and effects of different starter inoculations were recorded and discussed. Fermentation achieved a pH value of 3.8 after 60 hr. The performance of fermented product in the DPPH (alpha,alpha-diphenyl-beta- picrylhydrazyl) decreased from 92\% to 78\% after 48 hr, followed by a stationary state. Fermented sugar apple puree and fresh sugar apple juice blended in a ratio of 2:8 delivered the highest DPPH scavenging efficiency (88\%) and iron chelating ability (49\%). The relatively high values of these properties offer the potential for sugar apple juice to be further developed as a novel functional food. Such a development would surely help to ease recent overproduction problems.

}, keywords = {annonaceae, DPPH scavenging, Fermentation, Lactobacillus}, issn = {1021-9498}, author = {Tien, Y. Y. and Ng, C. C. and Chang, C. C. and Tseng, W. S. and Kotwal, S. and Shyu, Y. T.} } @article { ISI:000227411400025, title = {Synthetic studies toward tricyclic cembranoids: a modular approach for the construction of the tricyclic framework of eunicin}, journal = {Tetrahedron Letters}, volume = {46}, number = {11}, year = {2005}, month = {MAR}, pages = {1881-1884}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The synthesis of a sugar derived allene and its intramolecular silver mediated etherification followed by ring closing metathesis has been explored for building the tricyclic framework of eunicin. (C) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Allene, Carbohydrate, cembranoid, eunicin, Ring closing metathesis}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.01.094}, author = {Gurjar, MK and Nayak, S and Ramana, CV} } @article { ISI:000226847200018, title = {Tetrazine derived mononuclear Ru-II(acac)(2)(L)(1), [Ru-II(bpy)(2)(L)](ClO4)(2)(2) and [Ru-II(bpy)(L)(2)](ClO4)(2)(3) (L=3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine, acac = acetylacetonate, bpy=2,2 {\textquoteright}-bipyridine): syntheses, structures, spectra}, journal = {Polyhedron}, volume = {24}, number = {2}, year = {2005}, month = {JAN}, pages = {333-342}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Mononuclear ruthenium complexes of tetrazine derived L, Ru-II(acac)(2)(L) (1), [Ru-II(bpy)(2)(L)](ClO4)(2) (2) and [Ru-II(bpy)(L)(2)](ClO4)2 (3) (L = 3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine, acac = acetylacetonate and bpy = 2,2{\textquoteright}-bipyridine) were prepared. The free L exists as a dimeric entity in the solid state via hydrogen bonding interactions involving L and water molecules present in the crystal lattice. 1 exhibits unusually strong bonds from Ru-II to coordinating pyrazolyl-N (2.040(2) Angstrom) and especially to tetrazine-N (1.913(2) Angstrom). The Ru-III/Ru-II couples of 1-3 appeared at 0.28, 1.34 and 1.50 V versus SCE, respectively. The tetrazine and bpy-based reductions were observed at -1.33 (1); -0.55 and -1.55/-1.75/-1.98 (2); -0.47/-0.78 and -1.80/-2.02 V (3), respectively. 1, 2 and 3 displayed two MLCT bands each, corresponding to dpi(Ru-II) --\> pi* (L, tetrazine) and dpi(Ru-II) --\> pi* (acac or bpy or L) transitions. 1(+) and 2(+) showed rhombic EPR spectra at 110 and 4 K, respectively and 1(-), 2(-) and 3(-) exhibited multiple line EPR spectra at 300 K. 1-3 exhibited moderately strong emission spectra in EtOH-MeOH glass at 77 K. (C) 2004 Elsevier Ltd. All rights reserved.

}, keywords = {Electrochemistry, redox, ruthenium-tetrazine, spectra, structure, synthesis}, issn = {0277-5387}, doi = {10.1016/j.poly.2004.11.019}, author = {Nayak, A. and Patra, S. and Sarkar, B. and Ghumaan, Sandeep and Puranik, Vedavati G. and Kaim, Wolfgang and Lahiri, Goutam Kumar} } @article { ISI:000232196200008, title = {TiO2 ceramic varistor modified with tantalum and barium}, journal = {Materials Science and Engineering B-Solid State Materials for Advanced Technology}, volume = {123}, number = {1}, year = {2005}, month = {NOV}, pages = {50-52}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The non-linear current (I)-voltage (V) characteristics of titanium dioxide doped with small quantities of tantalum and barium (99.9 TiO2 + 0.1 Ta and 99.4 TiO2 + 0.1 Ta + 0.5 Ba, all are in at.\%) were investigated. These samples have the non-linear coefficient (alpha) values of (20-30) with high breakdown voltages (E-B similar to 400-700 V mm(-1)). The pentavalent tantalum acts as donor and increases the electronic conductivity. The higher electrical conductivity and decrease in the breakdown field strength with barium addition is attributed to higher density. The acceptor like surface states formed by barium ions segregate to grain boundaries due size misfit to thereby modifying the electrical barrier characteristics of grain boundaries. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Oxides, TiO2, varistor, X-ray diffraction}, issn = {0921-5107}, doi = {10.1016/j.mseb.2005.06.015}, author = {Gaikwad, A. B. and Navale, SC and Ravi, V} } @article { ISI:000228983300063, title = {Total synthesis of microcarpalide}, journal = {Journal of Organic Chemistry}, volume = {70}, number = {10}, year = {2005}, month = {MAY}, pages = {4207-4210}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient, convergent approach for the total synthesis of microcarpalide (1) is described. The synthetic strategy features the Sharpless asymmetric dihydroxylation, regioselective epoxide opening with various nucleophiles such as a lithium acetylide and cuprates derived from the vinyl stannane and the vinyl iodide for the construction of a C7-C8 trans-double bond and Yamaguchi macrolactonization as the key steps.

}, issn = {0022-3263}, doi = {10.1021/jo050193e}, author = {Kumar, P and Naidu, SV} } @article { ISI:000227346300059, title = {Unusual monodentate binding mode of 2,2 {\textquoteleft}-dipyridylamine (L) in isomeric trans(acac)(2)Ru-II(L)2, trans-[(acac)(2)Ru-III(L)(2)]ClO4, and cis-(acac)(2)Ru-II(L)(2) (acac = acetylacetonate). Synthesis, structures, and spectroscopic, electrochemical, and magn}, journal = {Inorganic Chemistry}, volume = {44}, number = {5}, year = {2005}, month = {MAR}, pages = {1571-1579}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{The reaction of cis-Ru(acac)(2)(CH3CN)(2) (acac = acetylacetonate) with 2,2{\textquoteright}-dipyridylamine (L) in ethanolic medium resulted in facile one-pot synthesis of stable [(acac)(2)Ru-III(L)]ClO4 ([1]ClO4), trans-[(acac)(2)Ru-II(L)2] (2), trans[(acac)(2)Ru-III(L)(2)[ClO4 ([2]ClO4), and cis-[(acac)(2)Ru-II(L)(2)] (3). The bivalent congener 1 was generated via electrochemical reduction Of [1]ClO4. Although in [1](+) the dipyridylamine ligand (L) is bonded to the metal ion in usual bidentate fashion, in 2/[2](+) and 3, the unusual monodentate binding mode of L has been preferentially stabilized. Moreover, in 2/[2](+) and 3, two such monodentate L{\textquoteright}s have been oriented in the trans- and cis-configurations, respectively. The binding mode of L and the isomeric geometries of the complexes were established by their single-crystal X-ray structures. The redox stability of the Ru(II) state follows the order 1 \< 2 much less than 3. In contrast to the magnetic moment obtained for [1]ClO4

}, issn = {0020-1669}, doi = {10.1021/ic049219v}, author = {Kar, S. and Chanda, N. and Mobin, Shaikh M. and Urbanos, F. A. and Niemeyer, M. and Puranik, Vedavati G. and Jimenez-Aparicio, Reyes and Lahiri, Goutam Kumar} } @article { ISI:000228510500016, title = {X-ray photoelectron spectroscopic investigations of Cu2O nanoparticles}, journal = {Materials Research Bulletin }, volume = {40}, number = {4}, year = {2005}, month = {APR}, pages = {694-700}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Cuprous oxide nanoparticles of five different sizes were obtained by electrochemical as well as chemical routes. Various capping agents were used to passivate the nanoparticles. X-ray diffraction studies show formation of single phased, cubic Cu2O nanoparticles. X-ray photoelectron spectroscopic studies indicate formation of CuO phase on the surface of Cu2O nanoparticles for uncapped as well as for those, capped by tetraoctylammonium bromide. On the other hand polyacrylamide and polyvinyl pyrrolidone capped samples did not show presence of CuO. X-ray photoelectron spectroscopy also indicates formation of a Cu2+ complex with the capping material on the surface of Cu2O nanoparticles. The results were discussed in terms of capability of passivation of various additives. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Nanostructures, Oxides, photoelectron spectroscopy, Surfaces}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2004.12.008}, author = {Nikesh, V. V. and Mandale, A. B. and Patil, K. R. and Mahamuni, Shailaja} } @article { ISI:000242935400096, title = {Collapse transition in random copolymer solutions}, journal = {Macromolecules}, volume = {39}, number = {26}, year = {2006}, month = {DEC}, pages = {9621-9629}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We present dynamic Monte Carlo lattice simulations of the coil to globule collapse of single chains of a copolymer comprising monomer units, m and c, wherein there is a net attractive interaction between c-units. As the copolymer is cooled, the solvent quality becomes poorer, and the size of the chain decreases, driven by the net m-m and c-c attractions. The strong c-c attraction increases the overall solvophobicity of the chain relative to a homopolymer and, therefore, copolymers collapse more abruptly and at a higher effective temperature relative to homopolymers. We compare copolymers with homopolymers by rescaling collapse data to the same theta values to account for the effect of overall solvophobicity. This comparison shows that the behavior of copolymers and the corresponding homopolymers is identical as the chain size reduces from high temperatures to the theta value. Beyond theta, copolymers with c-content \< similar to 50\% collapse more abruptly than either homopolymer, after accounting for the difference in overall solvophobicity. Collapse of copolymers containing higher c-content is dominated entirely by the c-c attractions, and these chains behave qualitatively like homopolymers with a higher effective solvophobicity. Analysis of the chain structure during collapse provides a structural reason for the qualitative change in copolymer collapse at low c-content. When such copolymers are cooled below theta, the c-units rapidly aggregate to form an isotropic, compact core surrounded by an anisotropic solvated shell of m-units. The shell densifies as the copolymer is further cooled, but remains anisotropic for the finite chain sizes investigated.

}, issn = {0024-9297}, doi = {10.1021/ma061017q}, author = {Dasmahapatra, Ashok Kumar and Kumaraswamy, Guruswamy and Nanavati, Hemant} } @article { ISI:000234951400014, title = {Coprecipitation technique to prepare LiTaO3 powders}, journal = {Materials Letters}, volume = {60}, number = {8}, year = {2006}, month = {APR}, pages = {1047-1048}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple coprecipitation technique had been successfully applied for the preparation of pure ultrafine single phase LiTaO3 (LT). An aqueous mixture of ammonium carbonate and ammonium hydroxide was used to precipitate Li+ and Ta5+ cations as carbonate and hydroxide respectively. This precursor oil heating at 750 degrees C produces LT powders. For comparison, LT powders were also prepared by the traditional solid state method. The phase contents and lattice parameters were studied by the powder X-ray diffraction (XRD). Particle size and morphology were studied by transmission electron spectroscopy (TEM). (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.10.074}, author = {Navale, SC and Gaikwad, A. B. and Ravi, V} } @article { ISI:000236996200020, title = {Crystalline phases in nylon-11: studies using HTWAXS and HTFTIR}, journal = {Macromolecules}, volume = {39}, number = {8}, year = {2006}, month = {APR}, pages = {2841-2848}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nylon-11 was crystallized into different crystalline phases by appropriate methods. The chance in the structure during heating was monitored in situ by wide-angle X-ray scattering (WAXS). The alpha phase obtained by precipitating nylon-11 in 1,4-butanediol started transforming into the pseudohexagonal phase on heating, but the transformation was not fully completed before melting. The melt crystallized sample at 175 degrees C gave the pseudohexagonal phase, which transformed into the alpha{\textquoteright} phase on cooling to room temperature at about 100 degrees C. The d spacing of the 00 1 reflection also showed a change at the transition temperature. The melt-quenched sample showed the pseudohexagonal phase, which did not change during heating, but on cooling transformed into alpha{\textquoteright} phase. The gamma phase was obtained by casting nylon-11 in trifluoroacetic acid (TFA), and it changed into the pscudohexagonal phase at about 110 degrees C on heating. The d spacing of the 001 reflection depended on the way in which it was obtained. The studies have shown that nylon-11 is one of the few nylons that exhibit an extensive degree of polymorphism. High-temperature Fourier transform infrared spectroscopy (HTFTIR) studies revealed, apart from the conformational differences between various phases of nylon-11, some information on the formation of the gamma phase.

}, issn = {0024-9297}, doi = {10.1021/ma052597e}, author = {Nair, S. S. and Ramesh, C. and Tashiro, K.} } @article { ISI:000245010200010, title = {Differentially expressed gene transcripts in roots of resistant and susceptible chickpea plant (Cicer arietinum L.) upon Fusarium oxysporum infection}, journal = {Physiological and Molecular Plant Pathology}, volume = {68}, number = {4-6}, year = {2006}, month = {APR}, pages = {176-188}, publisher = {ACADEMIC PRESS LTD ELSEVIER SCIENCE LTD}, type = {Article}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Differentially expressed genes in chickpea, (Cicer arietinum L.) during root infection by Fusarium oxysportan f sp. ciceri Racel, were identified using cDNA-RAPD and cDNA-AFLP approaches. The former employed decamer primers on cDNA template and revealed nine differentially expressed transcripts in the resistant-infected chickpea variety. Among the 2000 transcript-derived fragments (TDFs) screened by cDNA-AFLP, 273 were differentially expressed in chickpea roots during Fusaritan infection. Only 13.65\% of the TDFs were differentially regulated during pathogen challenge, while the other 86\% were expressed non-differentially during the process of pathogen infection in chickpea roots. Nineteen TDFs, which expressed differentially in the resistant-infected chickpea variety were cloned and sequenced. Two of these TDFs were similar to transcription factors like WRKY proteins and 14-3-3 proteins, while three TDFs represented the NBS-LRR-type gene sequences. Two TDFs had sequence identity to genes known to have function in defense. The RAPID TDF CaFRi60 showed sequence identity to gamma-glutamyl-cysteine synthetase. Among the TDFs examined by cDNA-AFLP, 19 were confirmed by Reverse Northern blot to be differentially expressed. The data confirms the effectiveness of the cDNA-AFLP technique in detecting differentially expressed genes during pathogenesis. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {cDNA-AFLP, Chickpea, Cicer arietinum, differentially expressed genes, fusarium oxysporum, Transcriptome}, issn = {0885-5765}, doi = {10.1016/j.pmpp.2006.10.003}, author = {Nimbalkar, Suhas B. and Harsulkar, Abhay M. and Giri, Ashok P. and Sainani, Mohini N. and Franceschi, Vincent R. and Gupta, Vidya S.} } @article {42469, title = {DMAP-catalyzed reaction of beta-ketoesters and dimethyl acetylenedicarboxylate: an efficient synthesis of polysubstituted benzenes and biaryls}, journal = {Tetrahedron}, volume = {62}, year = {2006}, month = {SEP}, pages = {10136{\textendash}10140}, type = {Article}, abstract = {

A DMAP catalyzed tandem addition{\textendash}cyclization{\textendash}dehydration sequence involving dimethyl acetylenedicarboxylate and β-ketoesters leading to polysubstituted benzene/biaryl derivatives is presented.

}, doi = {10.1016/j.tet.2006.08.031}, author = {Nair, Vijay and Vidya, N. and Biju, Akkattu T. and Deepthi, Ani B. and Abhilash, K. G. and Eringathodi, Suresh} } @article { ISI:000242598200030, title = {Effect of a focusing electric field on the formation of arc generated carbon nanotubes}, journal = {Nanotechnology}, volume = {17}, number = {23}, year = {2006}, month = {DEC}, pages = {5895-5902}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

The effect of a focusing electric field on the formation of carbon nanotubes in a direct current arc-plasma is investigated. The hard deposits on the surface of the cathode are the main products, rich in multi-walled carbon nanotubes. It is seen that the focusing electric field has a distinct influence on the yield, purity and morphology of the nanotubes. The yield of the carbon nanotubes under the {\textquoteleft}focused field condition{\textquoteright} has been found to be higher than that derived from the normal electrode configuration. It has been observed that the deposition of carbonaceous soot on the reactor wall is considerably reduced on application of the focusing electric field. Transmission electron microscopy has been used to determine the morphology of the nanotubes. In addition, Raman spectroscopy has helped in distinguishing the graphene-like structures from the disordered carbon networks and helped in analysing the morphology of the tubes. Thermal analysis gave a qualitative estimation of the relative yield of carbon nanotubes within the cathode deposits and their thermal stabilities. The crystalline nature of the samples has been confirmed by x-ray diffraction analysis. The results clearly indicate that the focusing electric field confines the positively charged carbon precursors within the cathode-anode space causing high relative yield and purity and has a distinct effect on controlling the inner diameter of the as-synthesized carbon nanotubes.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/17/23/030}, author = {Karmakar, Soumen and Nagar, Harshada and Pasricha, R. and Seth, T. and Sathe, V. G. and Bhoraskar, S. V. and Das, A. K.} } @article { ISI:000238110300002, title = {Effect of organic additives on the mitigation of volatility of 1-nitro-3,3 {\textquoteleft}-dinitroazetidine (TNAZ): next generation powerful melt cast able high energy material}, journal = {Journal of Hazardous Materials}, volume = {134}, number = {1-3}, year = {2006}, month = {JUN}, pages = {8-18}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

1-Nitro-3,3{\textquoteright}-dinitroazetidine(TNAZ) was synthesized based on the lines of reported method. Thermolysis studies on synthesized and characterized TNAZ using differential scanning calorimetry (DSC) and hyphenated TG-FT-IR techniques were undertaken to generate data on decomposition pattern. FF-IR of decomposition products of TNAZ revealed the evolution of oxides of nitrogen and HCN containing species suggesting the cleavage of C/N-NO(2) bond accompanied with the collapse of ring structure. The effect of incorporation of 15\% additives namely, 3-amino-1,2,4-triazole(AT), 3,5-diamino-1,2,4-triazole (DAT), carbohydrazide (CHZ), 5,7-dinitrobenzofuroxan (DNBF), bis (2,2-dinitropropyl) succinate (BNPS), triaminoguanidinium nitrate (TAGN), 2,4,6-trinitrobenzoic acid (TNBA) and nitroguanidine (NQ) on the volatility of TNAZ was investigated by undertaking thermogravimetric analysis. The TG pattern brings out the potential of BNPS and TAGN as additives to mitigate the volatility of TNAZ. The influence of additives on thermal decomposition of pattern of TNAZ was also investigated by DSC. The DSC results indicated that the additives did not have appreciable effect on the melting point of TNAZ. Scanning electron microscopic (SEM) studies were carried out to investigate the effect of additives on morphology of TNAZ. This paper also discusses the possible mechanism involved in between the TNAZ and TAGN and BNPS. It appears that the formation of charge transfer complex formation between the TNAZ and TAGN/BNPS. The effect of addition of high explosives such as CL-20, HMX and RDX on thermo-physical characteristics of TNAZ is also reported in this paper. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {melt castable explosive, morphological structure, synthesis, Thermolysis, trinitroazetidine (TNAZ), volatility behavior}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2003.10.008}, author = {Talawar, M. B. and Singh, Alok and Naik, N. H. and Polke, B. G. and Gore, G. M. and Asthana, S. N. and Gandhe, B. R.} } @article {42506, title = {Efficient protocol for genetic transformation and shoot regeneration of turmeric (Curcuma longa L.) via particle bombardment}, journal = {Plant Cell Reports}, volume = {25}, year = {2006}, month = {MAR}, pages = {112-116}, type = {Article}, doi = {10.1007/s00299-005-0033-1}, author = {Shirgurkar, M. V. and Naik, V. B. and von Arnold, S. and Nadgauda, R. S. and Clapham, D. H.} } @article { ISI:000237417400035, title = {Enantio- and diastereocontrolled total synthesis of (+)-boronolide}, journal = {Journal of Organic Chemistry}, volume = {71}, number = {10}, year = {2006}, month = {MAY}, pages = {3935-3941}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient stereoselective total synthesis of (+)-boronolide from valeraldehyde is described. The key steps include a Sharpless asymmetric hydroxylation, a chelation-controlled vinyl Grignard reaction followed by a Sharpless asymmetric epoxidation, hydrolytic kinetic resolution, and a ring-closing metathesis.

}, issn = {0022-3263}, doi = {10.1021/jo0603781}, author = {Kumar, P. and Naidu, S. V.} } @article { ISI:000239179300033, title = {Enantioselective synthesis of (+)-(S,S)-reboxetine}, journal = {Synlett}, number = {11}, year = {2006}, month = {JUL}, pages = {1771-1773}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

An efficient enantioselective synthesis leading directly to (+)-(S,S)-reboxetine has been described from commercially available trans-cinnammyl bromide using Sharpless asymmetric dihydroxylation as the key step.

}, keywords = {coupling, Dihydroxylation, Hydrogenation, reboxetine, trans-cinnamyl bromide}, issn = {0936-5214}, doi = {10.1055/s-2006-944210}, author = {Siddiqui, Shafi A. and Narkhede, Umesh C. and Lahoti, Rajgopal J. and Srinivasan, Kumar V.} } @article {42468, title = {Engaging zwitterions in carbon-carbon and carbon-nitrogen bond- forming reactions: a promising synthetic strategy}, journal = {Accounts of Chemical Research}, volume = {39}, year = {2006}, month = {JUN}, pages = {520{\textendash}530}, type = {Article}, abstract = {

An Account of carbon-carbon and carbon-nitrogen bond-forming reactions mediated by zwitterions generated by the addition of organic nucleophiles to activated unsaturated systems highlighting their synthetic potential is presented.

}, doi = {10.1021/ar0502026}, author = {Nair, Vijay and Menon, Rajeev S. and Sreekanth, A. R. and Abhilash, N. and Biju, Akkattu T.} } @article { ISI:000241157000039, title = {Evidence for intergranular tunnelling in polyaniline passivated alpha-Fe nanoparticles}, journal = {Nanotechnology}, volume = {17}, number = {18}, year = {2006}, month = {SEP}, pages = {4765-4772}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Nanoparticles are of immense importance both from the fundamental and application points of view. They exhibit quantum size effects which are manifested in their improved magnetic and electric properties. Mechanical attrition by high energy ball milling (HEBM) is a top down process for producing fine particles. However, fineness is associated with high surface area and hence is prone to oxidation which has a detrimental effect on the useful properties of these materials. Passivation of nanoparticles is known to inhibit surface oxidation. At the same time, coating polymer film on inorganic materials modifies the surface properties drastically. In this work a modified set-up consisting of an RF plasma polymerization technique is employed to coat a thin layer of a polymer film on Fe nanoparticles produced by HEBM. Ball-milled particles having different particle size ranges are coated with polyaniline. Their electrical properties are investigated by measuring the dc conductivity in the temperature range 10-300 K. The low temperature dc conductivity (I-V) exhibited nonlinearity. This nonlinearity observed is explained on the basis of the critical path model. There is clear-cut evidence for the occurrence of intergranular tunnelling. The results are presented here in this paper.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/17/18/039}, author = {Sunny, Vijutha and Narayanan, T. N. and Sajeev, U. S. and Joy, Pattayil Alias and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000236784200028, title = {Finite size effects on the structural and magnetic properties of sol-gel synthesized NiFe2O4 powders}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {302}, number = {1}, year = {2006}, month = {JUL}, pages = {190-195}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanoparticles of nickel ferrite have been synthesized by the sol-gel method and the effect of grain size oil its structural and magnetic properties have been Studied in detail. X-ray diffraction (XRD) studies revealed that all the samples are single phasic possessing the inverse spinel structure. Grain size of the sol-gel synthesized powders has been determined from the XRD data and the strain graph. A grain size of 9 nm was observed for the as prepared powders of NiFe2O4 obtained through the sol-gel method. It was also observed that strain was induced during the firing process. Magnetization measurements have been carried out on all the samples prepared in the present series. It was found that the specific magnetization of the nanosized NiFe2O4 powders was lower than that of the corresponding coarse-grained counterparts and decreased with a decrease in grain size. The coercivity of the sol-gel synthesized NiFe2O4 nanoparticles attained a maximum value when the grain size was 15 nm and then decreased as the grain size was increased further. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {grain size, magnetic properties, Nanoparticles, Nickel ferrite, strain}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2005.08.029}, author = {George, M. and John, A. M. and Nair, S. S. and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000236648300008, title = {Mesoporous molecular sieve (MCM-41)-filled sodium alginate hybrid nanocomposite membranes for pervaporation separation of water-isopropanol mixtures}, journal = {Separation of Purification Technology}, volume = {49}, number = {1}, year = {2006}, month = {APR}, pages = {56-63}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Sodium alginate (NaAlg) and the inesoporous molecular sieve (MCM-41)-filled NaAlg nanocomposite membranes have been prepared by solution casting and crosslinked with glutaraldehyde. Pervaporation performance of the MCM-41-filled NaAlg membranes has been tested and compared with plain NaAlg membrane for dehydrating isopropanol at 30 degrees C. In the studied feed composition range of 10-50 mass\% of water, 20 mass\% MCM-41-loaded NaAlg membrane gave the highest selectivity ranging between 29,991 and 3332 in the range of feed water compositions of 10-50 mass\%. Flux for the plain NaAlg membrane ranged between 0.067 and 0.340 kg/(m(2)h), while for 20 mass\% MCM-41-filled NaAlg membrane, flux increased to 0.110 and 0.555 kg/(m(2)h). To the best of our knowledge, this is the first study reported on the membrane forming properties of an admixed hybrid composite of a mesoporous molecular sieve (MCM-41) with NaAlg used in dehydration of isopropanol, yielding high selectivity to water at higher loadings of the molecular sieve as a filler. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {flux and selectivity, nanocomposite membranes, pervaporation, sodium alginate, water-isopropanol}, issn = {1383-5866}, doi = {10.1016/j.seppur.2005.08.006}, author = {Bhat, S. D. and Naidu, B. V. K. and Shanbhag, G. and Halligudi, Shivaraj B. and Sairam, M. and Aminabhavi, Tejraj M.} } @conference { ISI:000238125903358, title = {Micellization and colloidal adsorption of a model polyelectrolyte diblock copolymer in selective solvent: theoretical model combining scaling and lattice mean field approaches}, booktitle = { 231st National Meeting of the American-Chemical-Society}, volume = {231}, year = {2006}, note = {231st National Meeting of the American-Chemical-Society, Atlanta, GA, MAR 26-30, 2006}, month = {MAR}, pages = {358-COLL}, publisher = {American Chemical Society}, organization = {American Chemical Society}, type = {Meeting Abstract}, address = {1155 16th ST, NW, Washington, DC 20036 USA}, issn = {0065-7727}, author = {Natarajan, Upendra and Poddar, Neha} } @article {42467, title = {Novel synthesis of highly functionalized pyrazolines and pyrazoles by triphenylphosphine mediated reaction of dialkyl azodicarboxylate with allenic esters}, journal = {Organic Letters}, volume = {8}, year = {2006}, month = {MAY}, pages = {2213{\textendash}2216}, type = {Article}, abstract = {

Reaction of the Huisgen zwitterion, derived from triphenylphosphine and dialkyl azodicarboxylate, with allenic esters affords highly functionalized pyrazolines and pyrazoles. The crystal structure of pyrazoline derivative 7a showed extensive C-H{\textperiodcentered}{\textperiodcentered}{\textperiodcentered}O interactions. Pyrazole formation proceeds via a novel nitrogen to carbon migration of the carboalkoxy group.

}, doi = {10.1021/ol0604623}, author = {Nair, Vijay and Biju, Akkattu T. and Mohanan, Kishor and Eringathodi, Suresh} } @article { ISI:000237158200003, title = {Phase evolution of NiTiO3 prepared by coprecipitation method}, journal = {Materials Letters}, volume = {60}, number = {15}, year = {2006}, month = {JUL}, pages = {1791-1792}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple coprecipitation technique was used for the preparation of NiTiO3 powders. Ammonium carbonate solution was added to a solution mixture containing stoichiometric amounts of Ni(NO3)(2) and TiOCl2 to precipitate nickel as carbonate and titanium as hydroxide under basic conditions. The precipitate was calcined at different temperatures ranging from 100 to 800 degrees C and phase evolution of NiTiO3 was investigated by X-ray diffraction (XRD) studies. It is observed that nickel titanate was formed at 750 degrees C. For comparison, NiTiO3 was also prepared by standard ceramic process. Particle size and morphology was studied by transmission electron microscopy (TEM). (c) 2005 Elsevier B.V. All fights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, NiTiO3, Oxides, X-ray diffraction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.12.023}, author = {Murugan, A. Vadivel and Samuel, V. and Navale, S. C. and Ravi, V.} } @article { ISI:000242209000043, title = {Poly(urethane methacrylate-co-glycidyl methacrylate)-supported-polypropylene biphasic membrane for lipase immobilization}, journal = {Journal of Membrane Science}, volume = {285}, number = {1-2}, year = {2006}, month = {NOV}, pages = {395-403}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Polypropylene (PP) was hydrophilized by coating followed by UV curing of a blend of 2-hydroxyethyl methacrylate (HEMA) terminated polyurethane prepolymer and glycidyl methacrylate (GMA). This allows formation of a hydrophobic membrane with increased surface hydrophilicity, biocompatibility and stability. Candida rugosa lipase (CRL) was covalently immobilized on this membrane using 5\% glutaraldehyde as a crosslinking agent for post immobilization stabilization of enzyme on membrane. The membrane obtained was placed in a batch membrane reactor where a model esterification of oleic acid with octanol was studied. Under optimum conditions, the biocatalytic membrane gave a specific activity of 796.27 units/mg and 90.26\% activity yield. Moreover, there was 85. 10\% retention of specific activity. The biocatalytic membrane was observed to retain about 84.23\% of its synthetic activity after six cycles. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Candida rugosa lipase, Enzyme immobilization, membrane bioreactor, urethane methacrylate}, issn = {0376-7388}, doi = {10.1016/j.memsci.2006.09.009}, author = {Pujari, N. S. and Vaidya, Bx and Bagalkote, S. and Ponrathnam, S. and Nene, Sanjay} } @conference { ISI:000238125903211, title = {Preparation and characterization of a series of new organically modified montmorillonite clays using X-ray diffraction, thermogravimetric analysis and FTIR spectroscopy}, booktitle = {231st National Meeting of the American-Chemical-Society}, volume = {231}, year = {2006}, note = {231st National Meeting of the American-Chemical-Society, Atlanta, GA, MAR 26-30, 2006}, month = {MAR}, pages = {211-COLL}, publisher = {American Chemical Society}, organization = {American Chemical Society}, type = {Meeting Abstract}, address = {1155 16th ST, NW, Washington, DC 20036 USA}, issn = {0065-7727}, author = {Natarajan, Upendra and Tiwari, Rajkiran R.} } @article { ISI:000234951400008, title = {Preparation of nanocrystalline ferroelectric BaBi4Ti4O15 by Pechini method}, journal = {Materials Letters}, volume = {60}, number = {8}, year = {2006}, month = {APR}, pages = {1023-1025}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A gel was formed when an aqueous solution of BaCl2, BiNO3, TiOCl2 and citric acid in stoichiometric ratio is heated on a water bath. This gel on decomposition at 600 degrees C produced the nano crystallites of ternary oxide, BaBi4Ti4O15 (BBT). The phase contents and lattice parameters were Studied by the powder X-ray diffraction (XRD). Particle size and morphology was studied by transmission electron spectroscopy (TEM). The room temperature dielectric constant at I KHz is 90. The ferroelectric hysteresis loop parameters of these samples were also studied by a home built Sawyer-tower circuit. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {dielectric properties, Electron microscopy, ferroelectric properties, powders chemical preparation}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.10.068}, author = {Murugan, A. Vadivel and Navale, S. C. and Ravi, V.} } @article { ISI:000237600800007, title = {Rapid molecular identification of freshly squeezed and reconstituted orange juice}, journal = { International Journal of Food Science and Technology}, volume = {41}, number = {6}, year = {2006}, month = {JUN}, pages = {646-651}, publisher = {BLACKWELL PUBLISHING}, type = {Article}, address = {9600 GARSINGTON RD, OXFORD OX4 2DQ, OXON, ENGLAND}, abstract = {

This work presents a rapid and accurate molecular approach in the identification of freshly squeezed and reconstituted orange juice. Primers were designed based on the 18S and internal transcribed spacer (ITS) region. The findings indicated that self-made freshly squeezed orange juice heated to 80 degrees C for 30 s caused damage to DNA integrity, thus failing in amplification by primer 18S-ITSe, which gives a polymerase chain reaction product of 2081 bp, whereas primer 18S-ITSf, fragment length 2421 bp, could only be seen in heating conditions less stringent than 70 degrees C, 15 s. This new DNA integrity-dependent method has potential applications in identifying adulteration of freshly or processed orange juice.

}, keywords = {adulteration, citrus, DNA degradation, molecular detection, reconstituted juice}, issn = {0950-5423}, doi = {10.1111/j.1365-2621.2006.01125.x}, author = {Ng, C. C. and Chang, C. C. and Wu, I. C. and Kotwal, S. and Shyu, Y. T.} } @article { ISI:000241361400002, title = {Role of glucose in production and repression of polygalacturonase and pectate lyase from phytopathogenic fungus Fusarium moniliforme NCIM 1276}, journal = {World Journal of Microbiology \& Biotechnology}, volume = {22}, number = {9}, year = {2006}, month = {SEP}, pages = {893-899}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

A mangrove fungal isolate Fusarium moniliforme NCIM 1276 was found to produce the maximum extracellular endopolygalacturonase and pectate lyase activities in liquid medium containing 1\% citrus pectin and 0.2\% glucose at pH 5 and pH 8, respectively. The enzyme secretion started after 10 h, when the spores were completely germinated, and maximum production occurred after 72 h in the extracellular medium. The production of polygalacturonase was enhanced by 0.2\% glucose and completely repressed by 1\% glucose. Pectate lyase secretion was also induced by a similar concentration of glucose in the extracellular medium and significantly decreased at 1\% glucose. Quantification of extracellular and intracellular polygalacturonase and pectate lyase protein concentrations by ELISA and immunocytolocalization data suggested that glucose may control the expression of both enzymes at a transcriptional level.

}, keywords = {catabolic repression, Fusarium moniliforme, inducible enzyme, pectate lyase, polygalacturonase}, issn = {0959-3993}, doi = {10.1007/s11274-006-9119-3}, author = {Niture, Suryakant K. and Kumar, Ameeta R. and Pant, Aditi} } @article { ISI:000241949000010, title = {Role of ligands in the formation, phase stabilization, structural and magnetic properties of alpha-Fe2O3 nanoparticles}, journal = {Journal of Nanoparticle Research}, volume = {8}, number = {5}, year = {2006}, month = {OCT}, pages = {635-643}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The electrochemical synthesis of alpha Fe2O3 nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of alpha phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6-30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of alpha-Fe2O3 The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800 degrees C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m(2)/g.

}, keywords = {Alkyl chain length, alpha-Fe2O3, Electrochemistry, magnetic properties, Nanoparticles, narrow size distribution}, issn = {1388-0764}, doi = {10.1007/s11051-005-9033-x}, author = {Joshi, Satyawati S. and Patil, Prajakta R. and Nimase, Madhav S. and Bakare, P. P.} } @article { ISI:000238502400034, title = {Shape selective synthesis of long-chain linear alkyl benzene (LAB) with AIMCM-41/beta zeolite composite catalyst}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {253}, number = {1-2}, year = {2006}, month = {JUL}, pages = {239-244}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The liquid-phase alkylation of benzene with long-chain olefins such as 1-decene, 1-octene and 1-dodecene was carried out over AIMCM-41/Beta zeolite composite material as catalyst. The catalyst was prepared by seeding method and characterized by XRD, N-2 sorption, FTIR pyridine adsorption, NH3-TPD and SEM. Powder XRD of AlMCM-41/Beta zeolite composite material showed the co-existence of well-structured microporous and mesophase of AlMCM-41. The typical textural characteristics of micro- and meso-structured phases were observed in the composite material. The effect of temperature, reactant molar ratios and catalyst weight on 1-dodecene conversion and products selectivity was studied. The composite catalyst was found to be the highly selective towards the formation 2-dodecylbenzene. Under the reaction conditions of 120 degrees C, benzene/1-dodecene molar ratio 10 and time 2h, the catalyst gave 48\% dodecene conversion with 76\%, 2-dodecylbenzene selectivity. Significant improvement in catalytic activity has been achieved by composite material as compared to Al-MCM-41. Although zeolite beta and composite material gave similar conversion of dodecene, the composite material showed higher selectivity towards 2-dodecylbenzene, which could be due to higher diffusibility of 2-dodecylbenzene isomer in the composite material. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {AIMCM-41/beta zeolite composite, Alkylation, Benzene, long-chain olefins}, issn = {1381-1169}, doi = {10.1016/j.molcata.2006.03.045}, author = {Bordoloi, Ankur and Devassy, Biju M. and Niphadkar, P. S. and Joshi, P. N. and Halligudi, Shivaraj B.} } @article { ISI:000240670800021, title = {Short and practical enantioselective synthesis of linezolid and eperezolid via proline-catalyzed asymmetric alpha-aminooxylation}, journal = {Tetrahedron Letters}, volume = {47}, number = {38}, year = {2006}, month = {SEP}, pages = {6799-6802}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of the antibacterials, linezolid (U-100766), and eperezolid (U-100592) using D-proline-catalyzed asymmetric alpha-aminooxylation of aldehydes as the key step is described here. This is the first report on the enantioselective synthesis of linezolid and eperezolid using asymmetric catalysis. (c) 2006 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.07.065}, author = {Narina, Srinivasarao V. and Sudalai, Arumugam} } @article { ISI:000241179400021, title = {Short enantioselective synthesis of (-)-chloramphenicol and (+)-thiamphenicol using tethered aminohydroxylation}, journal = {Tetrahedron}, volume = {62}, number = {43}, year = {2006}, month = {OCT}, pages = {10202-10207}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of (-)-chloramphenicol (1) and (+)-thiamphenicol (2) is described. These antibiotics have been synthesized from commercially available 4-nitrobenzaldehyde and 4-(methylthio)benzaldehyde, respectively, using tethered amino-hydroxylation and Sharpless asymmetric epoxidation as the chirality inducing steps. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {asymmetric epoxidation, Asymmetric synthesis, Kinetic resolution, Tethered aminohydroxylation}, issn = {0040-4020}, doi = {10.1016/j.tet.2006.08.019}, author = {George, Shyla and Narina, Srinivasarao V. and Sudalai, Arumugarn} } @article { ISI:000238624000017, title = {Synthesis of MgNb2O6 by coprecipitation}, journal = {Materials Research Bulletin}, volume = {41}, number = {7}, year = {2006}, month = {JUL}, pages = {1353-1356}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A simple coprecipitation technique was used successfully to synthesize fine powders of MgNb2O6 (MN) phase. An aqueous mixture of ammonium carbonate and ammonium hydroxide was used to precipitate Mg2+ and Nb5+ cations as carbonate and hydroxide respectively under basic conditions. This precipitate on heating at 750 degrees C produced MN powders. For comparison MN powders were prepared by the traditional solid state method. The phase content and the lattice parameters were studied by powder X-ray diffraction (XRD). Particle size and morphology of the particles were studied by scanning electron microscopy (SEM). (C) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Ceramics, Chemical synthesis, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2005.12.009}, author = {Navale, S. C. and Gaikwad, A. B. and Ravi, V.} } @article { ISI:000240639000014, title = {Transesterification of cyclic carbonates with methanol at ambient conditions over tungstate-based solid catalysts}, journal = {Applied Catalysis A-General}, volume = {312}, year = {2006}, month = {SEP}, pages = {108-114}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Dimethyl carbonate synthesis with 80 mol\% yield is achieved through transesterification of ethylene carbonate with methanol at ambient conditions (RT and atmospheric pressure) using alkali and alkaline-earth tungstates as solid catalysts. The catalysts are efficient even at the sub-ambient temperatures. Reactions under CO2 pressure indicate that CO2 atmosphere retards the transesterification reaction completely below 100 degrees C. Experimental conditions of 150 degrees C and 3.4 MPa CO2 pressure are required to obtain maximum DMC yield of 71 mol\%. Synthesis of DMC by one-pot synthesis using epoxide, CO2 and methanol is not as effective as that by two-step method with the present catalyst system. Raman and IR spectra of methanol-interacting tungstates indicate the formation of a methoxide ion species adsorbed at the catalyst surface as one possible reaction intermediates. (C) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Dimethyl carbonate, ethylene carbonate, heterogeneous catalyst, Raman spectroscopy, sodium tungstate, transesterification}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.06.034}, author = {Sankar, M. and Nair, C. Madhavan and Murty, K. V. G. K. and Manikandan, Palanichamy} } @article { ISI:000238771400023, title = {Treatment of spentwash using chemically modified bagasse and colour removal studies}, journal = {Bioresource Technology}, volume = {97}, number = {14}, year = {2006}, month = {SEP}, pages = {1752-1755}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Studies were carried out on derivatisation of bagasse into an ion exchange material and application of this chemically modified bagasse in the treatment of distillery wastewater. It was found that CHPTAC bagasse with HCl treatment and DEAE-bagasse in its free base form were most effective in colour removal and the mechanism of colour removal indicated significant contribution of both, the conventional ion exchange and the chemical sorption. (c) 2005 Elsevier Ltd. All rights

}, keywords = {decolourisation, distillery effluent, modified biomass, vinasse}, issn = {0960-8524}, doi = {10.1016/j.biortech.2005.10.016}, author = {Mane, Jyoti D. and Modi, Shewta and Nagawade, Swati and Phadnis, S. P. and Bhandari, Vinay M.} } @article { ISI:000243831600015, title = {Acylation of anisole with long-chain carboxylic acids over wide pore zeolites}, journal = {Applied Catalysis A-General}, volume = {317}, number = {2}, year = {2007}, month = {FEB}, pages = {250-257}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The acylation of anisole with long-chain carboxylic acids (hexanoic, octanoic and decanoic) has been studied over three large pore zeolites-beta (BEA), faujasite (FAU) and mordenite (MOR). The acylation of anisole with the long chain acids produced mainly the ketone (4-methoxy phenyl alkyl ketone) and small amounts of the ester (phenyl alkanoate). The results revealed the reaction to be influenced by the type of zeolite and its Si/Al ratio (acidity) besides the chain length (carbon number) of the carboxylic acid. In the acylation of anisole with hexanoic acid, the activity of the zeolites increased with dealumination as it led to the generation of mesopores that resulted in a decrease in diffusion resistance of the zeolites. The reactivity of the acids in the acylation reaction was found to decrease with increase in the carbon number. The experimental data have been fitted into a pseudo first order kinetic model. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Acylation, Anisole, decanoic acid, hexanoic acid, octanoic acid, zeolites}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.10.023}, author = {Wagholikar, S. G. and Niphadkar, P. S. and Mayadevi, S. and Sivasanker, S.} } @article { ISI:000248238400001, title = {Application of hydrolytic kinetic resolution (HKR) in the synthesis of bioactive compounds}, journal = {Tetrahedron}, volume = {63}, number = {13}, year = {2007}, month = {MAR}, pages = {2745-2785}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, keywords = {Biological activity, bis-epoxides, Hydrolytic kinetic resolution, meso-epoxides, Natural products, synthesis, terminal epoxides}, issn = {0040-4020}, doi = {10.1016/j.tet.2006.12.015}, author = {Kumar, Pradeep and Naidu, Vasudeva and Gupta, Priti} } @article { ISI:000251244900014, title = {Cobalt-salen intercalated montmorillonite catalyst for air oxidation of p-cresol under mild conditions}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {25}, year = {2007}, note = {Joint 6th International Symposium on Catalysis in Multiphase Reactors/5th International Symposium on Multifunctional Reactors (CAMURE-6/ISMR-5-), Pune, INDIA, JAN 14-17, 2007}, month = {DEC}, pages = {8413-8419}, publisher = {AMER CHEMICAL SOC}, type = {Article, Proceedings Paper}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Air oxidation of p-cresol under very mild conditions (338 K and ambient pressure) was carried out in a semibatch reactor over a solid catalyst developed by intercalating cobalt-salen into the montmorillonite clay. The intercalation of cobalt - salen was done by a simple protocol, and the characterization of the intercalated catalyst was done by XPS, FTIR, and XRD techniques. A total selectivity \>= 90\% to the oxidation products could be achieved with this solid catalyst by eliminating the undesired coupling side products in air oxidation of p-cresol under ambient pressure conditions. Effect of various process parameters on the conversion and selectivity pattern were also studied, and it was found that the selectivity ratio of aldehyde to alcohol could be varied by suitably changing the reaction conditions. This heterogeneous catalyst was found to give a 5-fold higher turnover number than the homogeneous cobalt - salen complex.

}, issn = {0888-5885}, doi = {10.1021/ie07.00720}, author = {Rode, Chandrashekhar V. and Kshirsagar, Vikas S. and Nadgeri, Jayprakash M. and Patil, Kashinath R.} } @article { ISI:000250092000010, title = {Confinement of nano CdS in designated glass: a novel functionality of quantum dot-glass nanosystems in solar hydrogen production}, journal = {Journal of Materials Chemistry}, volume = {17}, number = {40}, year = {2007}, month = {AUG}, pages = {4297-4303}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The present work is the investigation of our novel approach to designing quantum dot-glass nanosystems by confining nano CdS in designated glass and the first employment of such a quantum dot system in solar hydrogen production. The CdS quantum dots were grown in a special glass matrix, which involved a sequence of steps. The obtained glass was of uniformly bright yellow in color and the bulk glass was pulverized to a fine powder of micron size particles. The glass powder was characterized structurally and morphologically. X-Ray diffraction and electron diffraction patterns reveal a hexagonal crystallite system for the CdS quantum dots. Field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray fluorescence spectroscopy and chemical leaching with HCl studies demonstrate that the 2.5 nm size CdS quantum dots distribute homogeneously in a monodispersed form in the glass domain and on the surface with a {\textquoteleft}{\textquoteleft}partially embedded exposure{\textquoteright}{\textquoteright} configuration. This disposition imparts an excellent photostability against photocorrosion and also a facile catalytic function. Therefore, even a very small amount of CdS quantum dots (0.005 g per gram of glass powder) is able to photodecompose H2S under visible light (lambda \>= 420 nm) both in alkaline and pure aqueous media and produce solar hydrogen with markedly high quantum yields of 17.5 and 11.4\%, respectively at 470 nm. Salient features like reusability after simple washing, corrosionless-stability and remarkable catalytic activity of this quantum dot-glass nanosystem are brought forth by our novel catalyst design and are much acclaimed in large scale solar H-2 production.

}, issn = {0959-9428}, doi = {10.1039/b708269j}, author = {Kale, Bharat B. and Baeg, Jin-Ook and Apte, Sanjay K. and Sonawane, Ravindra S. and Naik, Sonali D. and Patil, Kashinath R.} } @article { ISI:000244008300030, title = {Co-precipitation technique to prepare BaTa2O6}, journal = {Ceramics International}, volume = {33}, number = {2}, year = {2007}, month = {JAN}, pages = {297-299}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A mixture of ammonium oxalate and ammonium hydroxide was used to co-precipitate barium and tantalum ions as barium oxalate and tantalum hydroxide under basic conditions. On calcination at 750 degrees C, this precursor yielded BaTa2O6 (BT) ceramics. This is much lower temperature as compared to that prepared by traditional solid-state method (1000 degrees C) as reported for the formation of BaTa206. Transmission electron microscope (TEM) investigations revealed that the average particle size is 70 nm for the calcined powders. The room temperature dielectric constant at 1 kHz is found to be 100. (c) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {barium tantalate, Ceramics, Electron microscopy, Oxides, X-ray diffraction}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2005.08.012}, author = {Navale, S. C. and Samuel, Violet and Gaikwad, A. B. and Ravi, V.} } @article { ISI:000246158300001, title = {Coprecipitation technique to prepare CoTa2O6 and CoNb2O6}, journal = {Materials Letter}, volume = {61}, number = {11-12}, year = {2007}, month = {MAY}, pages = {2127-2129}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

An aqueous solution of sodium hydroxide was used to coprecipitate cobalt and tantalum (or niobium) ions from their precursors as hydroxides under basic conditions. This precipitate yielded CoTa2O6 (CT) or CoNb2O6 (CN) ceramics on calcining at 700 degrees C, i.e. at a temperature much lower than 900 degrees C, reported for the formation of these powders prepared by the traditional solid state method. The X-ray diffraction (XRD) studies were employed to investigate phase contents and lattice parameters. The morphology of the synthesized powders was investigated by transmission electron microscopy (TEM). (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, electronic materials, Oxides, X-ray methods}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.08.024}, author = {Mulla, Imtiaz S. and Natarajan, N. and Gaikwad, A. B. and Samuel, V. and Guptha, U. N. and Ravi, V.} } @article { ISI:000246158300058, title = {Coprecipitation technique to prepare NiNb2O6}, journal = {Materials Letter}, volume = {61}, number = {11-12}, year = {2007}, month = {MAY}, pages = {2354-2355}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A mixture of ammonium carbonate and ammonium hydroxide was used to coprecipitate nickel and niobium ions as nickel carbonate and niobium hydroxide under basic conditions. This precursor yielded NiNb2O6 (NN) ceramics on calcining at 700 degrees C (at a temperature lower than 800 degrees C which is necessary for the formation of NiNb2O6 when prepared by the traditional solid state method). The average particle size and morphology of these powders were investigated by transmission electron microscope (TEM). (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Electron microscopy, electronic materials, Oxides, X-ray methods}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.09.010}, author = {Samuel, V. and Gaikwad, A. B. and Jadhav, A. D. and Natarajan, N. and Ravi, V.} } @article { ISI:000254461400002, title = {Effect of auxin types on in vitro and ex vitro rooting and acclimatization of grapevine as influenced by substrates}, journal = {Indian Journal of Horticulture}, volume = {64}, number = {1}, year = {2007}, month = {MAR}, pages = {5-11}, publisher = {HORTICULTURAL SOC INDIA}, type = {Article}, address = {DIV FRUITS \& HORTICULTURAL TECHNOL, INDIAN AGRICULTURAL RESEARCH INST, NEW DELHI, 110 012, INDIA}, abstract = {

Transferring micropropagated plantlets from in vitro to in vivo conditions is a critical step because plantlets have under-developed cuticle and stomata which result in wilting due to low humidity, fungal attack and bleaching in high light intensities. The resumption of terminal growth indicates successful establishment which is a change from mixotrophy to autotrophy. The survival of Vitis vinifera cvs. 2A-Clone and Red Globe plantlets rooted in vitro was 86.66 and 83.33\%, respectively and the established plants showed a well-defined root system. Plantlets rooted in vivo by auxin pulse were easier to transfer and acclimatize with a survival percentage of 96.66 and 79.92 for 2A-Clone and Red Globe, respectively but the rooting was of fibrous type with few main roots and less number of root hairs. Coco-peat in combination with sand and soil was better for quick acclimatization and establishment (97.5 and 95\% survival for 2A-Clone and Red Globe respectively) of the micropropagated plantlets.

}, keywords = {auxin pulse, coco-peat, grape, micropropagation, plantlet survival}, issn = {0972-8538}, author = {Barreto, M. S. and Nookaraju, A.} } @article {42465, title = {Efficient higher-order cycloaddition reactions of 8,8-dicyanoheptafulvenes with dienes}, journal = {Synthesis-Stuttgart }, year = {2007}, month = {JUN}, pages = {1833-1836}, type = {Article}, abstract = {

The cycloaddition reactions of 8,8-dicyanoheptafulvene with electron-rich dienes afforded the higher order cycloaddition products in excellent yields. With cyclic dienes as well as dimeth-oxybutadiene the [8+2] adducts were obtained exclusively. With methyl- and dimethylbutadienes the [6+4] adducts were the only products isolated.

}, keywords = {cycloadditions - bicyclic compounds - polycycles - di-cyanoheptafulvene - tetrahydroazulenes}, doi = {10.1055/s-2007-983711}, author = {Nair, Vijay and Gopalakrishnan Abhilash, K. and Biju, Akkattu T. and Eringathodi, Suresh} } @article { ISI:000243630300013, title = {Enantioselective synthesis of (-)-cytoxazone and (+)-epi-cytoxazone via Rh-catalyzed diastereoselective oxidative C-H aminations}, journal = {Tetrahedron Letter}, volume = {48}, number = {1}, year = {2007}, month = {JAN}, pages = {65-68}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of (-)-cytoxazone (1) and (+)-epi-eytoxazone (2) using proline-catalyzed asymmetric alpha-amino-oxylation of aldehydes followed by Rh-catalyzed diastereoselective oxidative C-H amination as the key steps is described. syn or anti 1,2-aminoalcohols were obtained by Rh-catalyzed intramolecular amidation of the C-H bonds of carbamates or sulfamate esters with good to excellent diastereoselectivity. (c) 2006 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.11.016}, author = {Narina, Srinivasarao V. and Kumar, Talluri Siva and George, Shyla and Sudalai, Arumugam} } @article { ISI:000245388700011, title = {Enantioselective synthesis of (-)-pinellic acid}, journal = {Tetrahedron Letter}, volume = {48}, number = {13}, year = {2007}, month = {MAR}, pages = {2279-2282}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An enantioselective convergent approach toward the total synthesis of pinellic acid 1 from 1,9-nonanediol is described. The synthetic strategy features iterative Sharpless asymmetric dihydroxylation, Sonogashira coupling and Birch reduction. (c) 2007 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.01.163}, author = {Naidu, S. Vasudeva and Kumar, Pradeep} } @article { ISI:000248356100011, title = {Enantioselective synthesis of (S)-timolol via kinetic resolution of terminal epoxides and dihydroxylation of allylamines}, journal = {Tetrahedron}, volume = {63}, number = {14}, year = {2007}, month = {APR}, pages = {3026-3030}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of (S)-timolol has been described using chiral Co-salen-catalyzed kinetic resolution of less expensive (+/-)-epichlorohydrin with 3-hydroxy-4-(N-morpholino)-1,2,5-thiadiazole in good overall yield (55\%) and excellent enantioselectivity (98\%). Synthesis of (S)-timolol has also been achieved using hydrolytic kinetic resolution as well as asymmetric dihydroxylation routes in 90\% ee and 56\% ee, respectively. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {asymmetric reactions, diols, epoxides, Kinetic resolution, oxazolidinone}, issn = {0040-4020}, doi = {10.1016/j.tet.2007.01.057}, author = {Narina, Srinivasarao V. and Sudalai, Arumugam} } @article { ISI:000245291700016, title = {Finite size effects on the electrical properties of sol-gel synthesized CoFe2O4 powders: deviation from Maxwell-Wagner theory and evidence of surface polarization effects}, journal = {Journal of Physics D-Applied Physics}, volume = {40}, number = {6}, year = {2007}, month = {MAR}, pages = {1593-1602}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Fine particles of cobalt ferrite were synthesized by the sol-gel method. Subsequent heat treatment at different temperatures yielded cobalt ferrites having different grain sizes. X-ray diffraction studies were carried out to elucidate the structure of all the samples. Dielectric permittivity and ac conductivity of all the samples were evaluated as a function of frequency, temperature and grain size. The variation of permittivity and ac conductivity with frequency reveals that the dispersion is due to Maxwell-Wagner type interfacial polarization in general, with a noted variation from the expected behaviour for the cold synthesized samples. High permittivity and conductivity for small grains were explained on the basis of the correlated barrier-hopping model.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/40/6/001}, author = {George, Mathew and Nair, Swapna S. and Malini, K. A. and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000250792200005, title = {Immobilization of mushroom polyphenol oxidase on poly(allyl glycidyl ether-co-ethylene glycol dimethacrylate) macroporous beaded copolymers}, journal = {Reactive \& Functional Polymers}, volume = {67}, number = {10}, year = {2007}, month = {OCT}, pages = {905-915}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Functional, macroporous, beaded copolymers containing epoxy groups were synthesized for immobilization of polyphenol oxidase (PPO) from edible mushroom (Agaricus bisporus). The effect of incorporation of two different sets of monomers such as glycidyl methacrylate (GMA) and allyl glycidyl ether (AGE) and the effect of cross-linking agent ethylene glycol dimethacrylate (EGDM) with varying cross-link densities on binding and expression of mushroom PPO activity were studied. The effect of porogen viz. cyclohexanol and hexanol on PPO immobilization was studied. AGE copolymers with hexanol as a porogen were found to give higher binding and expression of PPO activity than GE polymers. Crosslinking of amino groups of enzyme with 5\% glutaraldehyde for 6 h gave a stable binding of PPO on AGE-75(Hex) polymer with storage half-life of approximately 25 days. Under optimum conditions, AGE-75(Hex) polymer gave 70.3\% of activity yield while percent retention of PPO activity was found to be 83.5\%. Immobilized PPO showed a broader pH, higher temperature and excellent storage stability. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {cross-linking agent, Enzyme immobilization, Epoxy-activated support, mushroom PPO}, issn = {1381-5148}, doi = {10.1016/j.reactfunetpolym.2007.05.015}, author = {Vaidya, Bhalchandra K. and Karale, Abhijeet J. and Suthar, Hitesh K. and Ingavle, Ganesh C. and Pathak, Tara Sankar and Ponrathnam, S. and Nene, Sanjay} } @article { ISI:000244429400011, title = {In vitro clonal propagation of Casuarina equisetifolia forst. from mature tree-derived explants}, journal = {Current Science}, volume = {92}, number = {3}, year = {2007}, month = {FEB}, pages = {287-290}, publisher = {INDIAN ACAD SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, issn = {0011-3891}, author = {Seth, Rupali and Kendurkar, Shuchishweta V. and Nadgauda, Rajani} } @article { ISI:000247943800001, title = {Influence of organic modification on mechanical properties of melt processed intercalated poly(methyl methacrylate)-organoclay nanocomposites}, journal = {Journal of Applied Polymer Science}, volume = {105}, number = {5}, year = {2007}, month = {SEP}, pages = {2433-2443}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

The influence of organic modifiers on intercalation extent, structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)-clay nanocomposites were studied. Two different organic modifiers with varying hydrophobicity (single tallow versus ditallow) were investigated. The nanocomposites were prepared from melt processing method and characterized using wide angle X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, differential scanning calorimetry (DSC), and tensile tests. Mechanical properties such as tensile modulus (E), break stress (sigma(brk)), and 0\% break strain (epsilon(brk)) were determined for nanocomposites at various clay loadings. Extent of PMMA intercalation is sufficient and in the range 9-15 angstrom depending on organoclay and filler loading. Overall thermal stability of nanocomposites increases by 16-30 degrees C. The enhancement in T-g of nanocomposite is merely by 2-4 degrees C. With increase in clay loading, tensile modulus increases linearly while \% break strain decreases. Break stress is found to increase till 4 wt \% and further decreases at higher clay loadings. The overall improvement in thermal and mechanical properties was higher for the organoclay containing organic modifier with lower hydrophobicity and single tallow amine chemical structure. (c) 2007 Wiley Periodicals, Inc.

}, keywords = {mechanical properties, Nanocomposites, organoclay, structure, Thermal properties}, issn = {0021-8995}, doi = {10.1002/app.26192}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article { ISI:000244008300028, title = {Influence of surfactant on ZnO varistors}, journal = {Ceramics International}, volume = {33}, number = {2}, year = {2007}, month = {MAR}, pages = {289-291}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

ZnO varistors with and without surfactant such as sodium dodecyl sulphate (SIDS) are prepared by nitrate-combustion process. The samples were identically heat treated and sintered at 1000 degrees C for 12 h to study the influence of the surfactant on the nonlinear electrical properties of polycrystalline ZnO. It is observed that the nonlinear coefficient decreases marginally (alpha = 35) for samples prepared with surfactant, whereas breakdown field (E-B = 130 V/mm) decreased significantly. The corresponding parameters for the samples synthesized without surfactant are alpha = 45 and E-B = 400 V/mm. Hence, this method can be used for the manufacture of varistors with low to moderate breakdown fields. (c) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Chemical synthesis, Semiconductors, X-ray methods, ZnO}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2005.08.010}, author = {Dhage, S. R. and Navale, S. C. and Ravi, V.} } @article { ISI:000250178900006, title = {Low temperature synthesis and NOx sensing properties of nanostructured Al-doped ZnO}, journal = {Sensors and Actuators B-Chemical}, volume = {126}, number = {2}, year = {2007}, month = {OCT}, pages = {382-386}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Although ZnO is studied intensively as a sensing material, there are limited reports available on aluminum-doped ZnO (AZO) as a NO, sensor. This paper reports selective NO, sensing characteristics of M-doped ZnO synthesized in the form of porous pellets sintered at 350 degrees C. The salient feature of our experimental results is that our sensor can detect small concentrations of NO, at lower operating temperature. It is also observed that as compared to gases such as SOx HCl, LPG, H2S, H-2, ammonia, alcohol and acetone it selectively detects NOx due to Al-doping. The amount of Al in ZnO during synthesis is varied between 1 and 10 wt\%. Our sensor senses NO, concentration as low as 20ppm at 100 degrees C with a \%response of 11 and a \%response of 740 at 300 degrees C for 1 wt\% Al. Of all the compositions with Al-doping, I wt\% is found to give best results. Sensing experiments carried out at 350 C, however. do not show any significant improvement in the gas sensing properties. The phase contents and lattice parameters were determined by XRD and the average particle size was obtained using Scherrer formula. A probable mechanism for sensing NO, involving oxygen ion adsorption and desorption on the surface of sensor has been suggested. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {aluminum doping, nanomaterial, NOx, Sensor, ZnO}, issn = {0925-4005}, doi = {10.1016/j.snb.2007.03.019}, author = {Navale, S. C. and Ravi, V. and Mulla, Imtiaz S. and Gosavi, S. W. and Kulkarni, S. K.} } @article { ISI:000244127600016, title = {NaIO4-mediated asymmetric bromohydroxylation of alpha,beta-unsaturated carboxamides with high diastereoselectivity: a short route to (-)-cytoxazone and droxidopa}, journal = {Tetrahedron Letter}, volume = {48}, number = {8}, year = {2007}, month = {FEB}, pages = {1375-1378}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The NaIO4-mediated asymmetric bromohydroxylation of alpha,beta-unsaturated carboxamides was achieved using lithium bromide as the bromine source under acidic conditions at rt to afford the corresponding chiral alpha-bromo-beta-hydroxy carboxamides. Excellent yields (77-90\%) and diastereoselectivities (up to 10:1) along with exclusive control over regio- as well as anti-selectivity are the main features with a good scope of substrates. The method has successfully been applied in the enantioselective syntheses of two biologically important molecules, viz (-)-cytoxazone and L-threo-DOPS (droxidopa). (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {asymmetric bromohydroxylation, Carboxamide, cytoxazone, droxidopa, NaIO4}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.12.109}, author = {George, Shyla and Narina, Srinivasarao V. and Sudalai, Arumugam} } @article {42463, title = {Novel reaction of the {\textquotedblleft}huisgen zwitterion{\textquotedblright} with chalcones and dienones: an efficient strategy for the synthesis of pyrazoline and pyrazolopyridazine derivatives}, journal = {Angewandte Chemie-International Edition}, volume = {46}, year = {2007}, month = {MAR}, pages = {2070{\textendash}2073}, type = {Article}, abstract = {

Two unexpected transformations: The reaction of the Huisgen zwitterion derived from triphenylphosphane and diisopropyl azodicarboxylate (DIAD) with chalcones affords functionalized pyrazolines. In contrast, the reaction with dienones affords pyrazolopyridazines, presumably by Diels{\textendash}Alder reaction of the initially formed pyrazoline with excess DIAD (see scheme).

}, keywords = {chalcones; nitrogen heterocycles; pyrazolines; synthetic methods; zwitterions}, doi = {10.1002/anie.200604025}, author = {Nair, Vijay and Biju, Akkattu T. and Mathew, Smitha C. and Eringathodi, Suresh} } @article { ISI:000251908500042, title = {Pathway to copolymer collapse in dilute solution: uniform versus random distribution of comonomers}, journal = {Journal of Chemical Physics}, volume = {127}, number = {23}, year = {2007}, month = {DEC}, pages = {234901}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Monte Carlo simulations show that copolymers with uniformly (or periodically) distributed sticky comonomers collapse {\textquoteleft}{\textquoteleft}cooperatively,{\textquoteright}{\textquoteright} abruptly forming a compact intermediate comprising a monomer shell surrounding a core of the aggregated comonomers. In comparison, random copolymers collapse through a relatively less-compact intermediate comprising a comonomer core surrounded by a fluffy monomer shell that densifies over a wide temperature range. This difference between the collapse pathways for random and uniform copolymers persists to higher chain lengths, where uniform copolymers tend to form multiple comonomer cores. In this paper, we describe the formation of such an intermediate state, and the subsequent collapse, by recognizing that these arise from the expected balance between comonomer aggregation enthalpy and loop formation entropy dictated by the chain microstructure. (c) 2007 American Institute of Physics.

}, issn = {0021-9606}, doi = {10.1063/1.2802296}, author = {Dasmahapatra, Ashok Kumar and Nanavati, Hemant and Kumaraswamy, Guruswamy} } @article {42571, title = {PET-SWNT nanocomposites through ultrasound assisted dissolution-evaporation}, journal = {European Polymer Journal}, volume = {43}, year = {2007}, month = {JUN}, pages = {2279-2285}, type = {Article}, abstract = {

Poly(ethylene terephthalate) (PET) based nanocomposites have been prepared with single walled carbon nanotubes (SWNTs) through an ultrasound assisted dissolution-evaporation method. Differential scanning calorimetry studies showed that SWNTs nucleate crystallization in PET at weight fractions as low as 0.3\%, as the nanocomposite melt crystallized during cooling at temperature 24 degrees C higher than neat PET of identical molecular weight. Isothermal crystallization studies also revealed that SWNTs significantly accelerate the crystallization process. Mechanical properties of the PET-SWNT nanocomposites improved as compared to neat PET indicating the effective reinforcement provided by nanotubes in the polymer matrix. Electrical conductivity measurements on the nanocomposite films showed that SWNTs at concentrations exceeding 1 wt\% in the PET matrix result in electrical percolation. Comparison of crystallization, conductivity and transmission electron microscopy studies revealed that ultrasound assisted dissolution-evaporation method enables more effective dispersion of SWNTs in the PET matrix as compared to the melt compounding method. (c) 2007 Elsevier Ltd. All rights reserved.

}, doi = {10.1016/j.eurpolymj.2007.03.020}, author = {Anoop, Anand K. and Agarwal, U. S. and Nisal, Anuya and Joseph, Rani} } @article {42462, title = {Reaction of huisgen zwitterion with diaryl-1,2-diones and ketones: an efficient protocol for carbon-nitrogen bond formation}, journal = {Synthesis-Stuttgart}, year = {2007}, month = {JAN}, pages = {697-704}, type = {Article}, abstract = {

The reaction of Huisgen zwitterion, derived from triphenylphosphine and dialkyl azodicarboxylate, with diaryl-1,2-diones afforded N,N-dicarboalkoxy monohydrazones via a mechanistically novel rearrangement. Cyclic and acyclic ketones furnished vinyl hydrazinedicarboxylates under similar conditions.

}, keywords = {betaines - diazo compounds - hydrazones - ketones - rearrangements}, doi = {10.1055/s-2007-965910}, author = {Nair, Vijay and Biju, Akkattu T. and Mathew, Smitha C.} } @article {42466, title = {Reaction of tpp-azodicarboxylate zwitterions and aldehydes: unprecedented synthesis of acyl carbamates}, journal = {Tetrahedron Letters}, volume = {48}, year = {2007}, month = {OCT}, pages = {9018{\textendash}9020}, type = {Article}, abstract = {

An efficient synthesis of acyl carbamates from aryl aldehydes by the reaction of triphenylphosphine and dialkyl azoesters is described.

}, doi = {10.1016/j.tetlet.2007.10.092}, author = {Nair, Vijay and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh} } @article { ISI:000246832500007, title = {Simple and efficient approach to 1,3-aminoalcohols: application to the synthesis of (+)-negamycin}, journal = {Tetrahedron Letter}, volume = {48}, number = {22}, year = {2007}, month = {MAY}, pages = {3793-3796}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short and practical enantioselective synthesis of (+)-negamycin has been achieved in high enantio- and diastereomeric excess using an iterative Jacobsen{\textquoteright}s hydrolytic kinetic resolution as the key step. (C) 2007 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.03.169}, author = {Naidu, S. Vasudeva and Kumar, Pradeep} } @article {42464, title = {Stereoselective synthesis of 3,4-trans-disubstituted γ-lactams by cerium(iv) ammonium nitrate mediated radical cyclization of cinnamamides}, journal = {Synthesis-Stuttgart}, year = {2007}, month = {MAR}, pages = {1179-1184}, type = {Article}, abstract = {

A facile synthesis of 3,4-trans-disubstituted γ-lactams was developed, consisting of the radical cyclization of cinnam-amides mediated by cerium(IV) ammonium nitrate. The single-electron-transfer (SET) reaction of the methoxystyrenyl moiety mediated by cerium(IV) ammonium nitrate gives rise to a cation radical, whose cyclization followed by reaction with oxygen and methanol generates 3,4-trans-disubstituted γ-lactams.

}, keywords = {cerium(IV) ammonium nitrate - intramolecular cyclization - cinnamamides - single electron transfer - γ-lactams}, doi = {10.1055/s-2007-965981}, author = {Nair, Vijay and Mohanan, Kishor and Suja, Tachapully D. and Biju, Akkattu T.} } @article { ISI:000243765100017, title = {Swelling and mechanical behavior of modified poly(vinyl alcohol)/laponite nanocomposite membranes}, journal = {Journal of Applied Polymer Science}, volume = {103}, number = {5}, year = {2007}, month = {MAR}, pages = {2896-2903}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Nanocomposite (NC) membranes based on hydrophobically modified PVA and laponite were synthesized with varying laponite content in the feed. The incorporation of laponite in NC membranes was investigated by FTIR spectroscopy and thermogravimetric analysis. The swelling ratio of membranes was determined as a function of temperature and laponite content. Swelling studies of NC membranes exhibited the decrease in swelling with an increase in laponite content in the NC membranes. The swelling ratio of NC membrane with 20\% laponite slightly increased with an increase in temperature. Dynamic mechanical analysis showed the systematic increase in storage modulus with laponite content, which indicates the enhancement of mechanical property upon laponite addition. There was also a decrease in the tan 6 peak values of NC membranes with an increase in laponite content in NCs. The permeabilities through NC membranes as a function of solute size and laponite content were studied and the results showed molecular screening based on size. The permeability of solute reduced due to the presence of well-dispersed laponite in the NC. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {Dynamic mechanical analysis, laponite, membranes, nanocomposite hydrogel, poly(vinyl alcohol)}, issn = {0021-8995}, doi = {10.1002/app.25469}, author = {Nair, Shubhangi H. and Pawar, Kiran C. and Jog, Jyoti Prakash and Badiger, Manohar V.} } @article { ISI:000250387000005, title = {Synergistic effect of CPPU and benzyladenine on embryo rescue in six. stenospermocarpic cultivars of grapevine}, journal = {Vitis}, volume = {46}, number = {4}, year = {2007}, month = {JAN}, pages = {188-191}, publisher = {BUNDESANSTALT ZUCHTUNGS FORSCHUNG KULTURPFLANZEN}, type = {Article}, address = {INST REBENZUCHTUNG GEILWEILERHOF, D-76833 SIEBELDINGEN, GERMANY}, abstract = {

In ovulo/embryo culture technique has been used to recover hybrids from seedless grapevines. The present investigation was carried out to study the influence of pre-bloom sprays of N-(2-chloro-4-pyridyl)-N{\textquoteright}-phenylurea (CPPU) - a synthetic cytokinin, and N-6-benzyladenine (BA) supplemented in culture media on embryo recovery in six stenospermocarpic grapevine cultivars. The results showed synergistic effect of CPPU and BA on embryo recovery. Though a CPPU spray alone increased embryo recovery in four out of six cultivars tested, the efficiency was enhanced several fold on culture of excised ovules on media supplemented with BA. The percentage of embryo recovery also depended on BA concentration and varied among six cultivars indicating a genotypic influence as well. Germination percentage of rescued embryos varied among the six cultivars and mostly corresponded with embryo recovery. Germinated embryos developed into normal plantlets. Present study demonstrates that spraying of panicles with CPPU and incorporation of BA in the ovule culture medium can enhance the embryo recovery in stenospermocarpic cultivars of grapevine.

}, keywords = {benzyladenine, CPPU, embryo rescue, seedless grapes}, issn = {0042-7500}, author = {Nookaraju, A. and Barreto, M. S. and Karibasappa, G. S. and Agrawal, Dinesh C.} } @article {43063, title = {Synthesis of 2-[4-(10H-Substituted Phenothiazine-3-yl)-6-Pyrimidin-2-Phenylthiol/ol/amine/thiol] Pyrroles}, journal = {E-Journal of Chemistry}, volume = {4}, year = {2007}, month = {JAN}, type = {Article}, abstract = {

2-[4-Hydroxy benz-1(propene-1-one)]Pyrrole II on treatment with phenyl thiourea, guanidine carbonate, urea and thiourea in alcoholic KOH yielded compounds III, IV, V, VI which on treatment with different aryl anilines gave compounds VII, VIII, IX, X which under goes cyclisation with sulphur and iodine to give 2-[4-(10H-substituted phenothiazine-3-yl)-6-pyrimidin-2-phenylthiol/-ol/-amine/-thiol] pyrrole XI(a-j), XII(a-j), XIII(a-j) and XIV(a-j) respectively. The structural products were characterized by elemental analysis and spectral data.

}, doi = {10.1155/2007/572543}, author = {Narule, Meghasham and Meshram, Jyotsna S. and Santhakumari, B. and Shanware, A.} } @article { ISI:000248376400006, title = {Unusual trisulphide linkage in bromine-thiourea reaction: crystal structure of formamidinium trisulphide complex with bromine}, journal = {Molecular Crystals and Liquid Crystals}, volume = {469}, year = {2007}, month = {SEP}, pages = {69+}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

{A new complex of formamidinium trisulphide with bromine has been synthesized. Single-crystal X-ray analysis of this compound revealed a novel trisulphide linkage in the formamidinium trisulphide moiety. The crystals belong to orthorhombic space group Fdd2 with a = 14.9119(15)

}, keywords = {bromine, crystal structure, formamidinium trisulphide, thiourea}, issn = {1542-1406}, doi = {10.1080/15421400701431265}, author = {Tol, Abhaya D. and Natu, Arun D. and Puranik, Vedavati G.} } @article { ISI:000244008300031, title = {Varistors based on Ta-doped TiO2}, journal = {Ceramics International}, volume = {33}, number = {2}, year = {2007}, month = {MAR}, pages = {301-303}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The nonlinear current (I)-voltage (V) characteristics of titanium dioxide are examined when doped with small quantities (0.05-0.5 at.\%) of tantalum pentaoxide. For optimum compositions, the nonlinear coefficients are found to be in the range of 25-30 and the breakdown field strength (EB) is similar to 4000 V/cm. The obtained alpha- and E-B-values are higher than the previously reported values for TiO2 ceramics. The acceptor like surface states at the grain boundary adsorb oxygen during sintering and cooling, leading to formation of grain boundary barrier. The grain boundary barrier height (OB) is calculated using Schottky equation. (c) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {Ceramics, Oxides, Schottky barrier, TiO2, varistor}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2005.07.026}, author = {Navale, S. C. and Murugan, A. Vadivel and Ravi, V.} } @article {42461, title = {Carbon-nitrogen bond-forming reactions of dialkyl azodicarboxylate: a promising synthetic strategy}, journal = {Chemistry an Asian Journal}, volume = {3}, year = {2008}, month = {MAY}, pages = {810{\textendash}820}, type = {Article}, abstract = {

Azodicarboxylates have found applications in electrophilic amination reactions and in pericyclic reactions. The nucleophilic trigger in Mitsunobu reactions, that is, the zwitterion formed from triphenylphosphine and dialkyl azodicarboxylate, has been utilized recently in various heterocyclic constructions. This Focus Review summarizes the potential utility of azodicarboxylates in various carbon{\textendash}nitrogen bond-forming reactions.

}, keywords = {amination reactions; azodicarboxylates; C[BOND]N bond formation; heterocycles; Huisgen zwitterion}, doi = {10.1002/asia.200700341}, author = {Nair, Vijay and Biju, Akkattu T. and Mathew, Smitha C. and Pattoorpadi, Beneesh Babu} } @article { ISI:000253497900006, title = {Cellular polyamines influence maturation and germination of somatic embryos from pro-embryonal masses of two grapevine cultivars}, journal = {Vitis}, volume = {47}, number = {1}, year = {2008}, month = {JAN}, pages = {31-34}, publisher = {BUNDESANSTALT ZUCHTUNGS FORSCHUNG KULTURPFLANZEN}, type = {Article}, address = {INST REBENZUCHTUNG GEILWEILERHOF, D-76833 SIEBELDINGEN, GERMANY}, abstract = {

Somatic embryos of grapevine multiply repeatedly and often fail to mature and germinate due to factors like dormancy and embryo teratology. The present investigation was carried out to improve the maturation and germination of somatic embryos from pro-embryonal masses (PEM) of 2A-Clone and {\textquoteleft}Crimson Seedless{\textquoteright}, two seedless grapevine cultivars. Also, the aim was to study a correlation between cellular and residual polyamine (PA) levels in PEM and culture media. The efficiency of maturation and germination of embryos from PEM varied significantly between the two cultivars and depended on incubation period and type of PAs in the medium. HPLC analysis showed that higher levels of cellular putrescine in PEM had correlation with maturation and germination percentages in both cultivars. The levels of three PAs depleted in the media rapidly indicating its uptake by PEM. Of the three PAs, putrescine (PUT) was the most effective and resulted in 100.0 or 92.0 \% maturation at 14 d or 30 d in 2A-Clone or {\textquoteleft}Crimson Seedless{\textquoteright}, respectively. The maximum germination of somatic embryos was recorded with PUT at 14 d or 21 d in 2A-Clone or {\textquoteleft}Crimson Seedless{\textquoteright}, respectively.

}, keywords = {germination, Grapevine, maturation, polyamines, {\textquoteleft}2A-Clone{\textquoteright}, {\textquoteleft}Crimson Seedless{\textquoteright}}, issn = {0042-7500}, author = {Nookapaju, A. and Barreto, M. S. and Agrawal, Dinesh C.} } @article { ISI:000259799300016, title = {C-glycosides of dodecanoic acid: new capping/reducing agents for glyconanoparticle synthesis}, journal = {Tetrahedron Letters}, volume = {49}, number = {43}, year = {2008}, month = {OCT}, pages = {6227-6230}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A concise synthesis of 12-C-glycosylated dodecanoic acids employing an olefin cross-metathesis reaction is developed. Examination of these acids as capping agents for the synthesis of metal nanoparticles reveals that they do not cap the Co-metal nanoparticles synthesized in aqueous phase, but that two of them can reduce and cap the Ag nanoparticles in water without any aggregation. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {C-Glycosides, Cross metathesis, glyconanoparticles, Grubbs{\textquoteright} catalyst, silver nanoparticles}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.08.030}, author = {Ramana, C. V. and Durugkar, Kulbhushan A. and Puranik, Vedavati G. and Narute, Sachin B. and Bhagavatula L. V. Prasad} } @article { ISI:000252539500001, title = {Comparative biochemical and structural characterizations of fungal polygalacturonases}, journal = {Biologia}, volume = {63}, number = {1}, year = {2008}, month = {FEB}, pages = {1-19}, publisher = {WALTER DE GRUYTER GMBH}, type = {Article}, address = {GENTHINER STRASSE 13, D-10785 BERLIN, GERMANY}, abstract = {

Endo- and exo-polygalacturonases produced by various fungi are involved in the degradation of pectic substances. They have found a wide range of applications in the food and textile industries. Several phyto-pathogenic fungi secrete polygalacturonases and they act as virulence factors during plant pathogenesis. The comparison of biochemical properties of different fungal polygalacturonases, their mechanism of actions, structural aspects and interactions with inhibitors/proteins could be used as a possible strategy for the fungal-crop disease management. This review focuses on fungal polygalacturonases, including their regulation, comparative biochemical and structural characterizations and their interactions with inhibitors.

}, keywords = {pectate lyase, plant pathogenesis, polygalacturonase, polygalacturonase-inhibiting proteins}, issn = {0006-3088}, doi = {10.2478/s11756-008-0018-y}, author = {Niture, Suryakant K.} } @article { ISI:000256290100015, title = {Composites of polypropylene with layered Mg-silsesquioxanes show an unusual combination of properties}, journal = {Industrial \& Engineering Chemistry Research}, volume = {47}, number = {11}, year = {2008}, month = {JUN}, pages = {3891-3899}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report the synthesis of vinyl modified magnesium silsesqiuoxanes ({\textquoteright}{\textquoteright}vinyl clay{\textquoteright}{\textquoteright}), and the formation of their composites with isotactic polypropylene (iPP) by melt compounding. Vinyl clay is a layered compound with a layer thickness of approximately 1 nm. Vinyl clay does not exfoliate in iPP; rather, it disperses to form a network that exhibits a characteristic low frequency solid-like plateau in the elastic modulus in dynamic melt theological measurements. Strangely, vinyl clay also plasticizes iPP-there is a decrease in the high frequency complex viscosity. The decrease in the complex viscosity is higher at higher frequencies, suggesting the influence of slip at the iPP-vinyl clay interface. The combination of the low frequency elastic plateau and plasticization makes the vinyl clay composite significantly more shear thinning than the matrix iPP. In the solid state, vinyl clay-iPP composites exhibit increased tensile modulus (showing approximate to 50\% increase for a 5\% loading), but surprisingly, no corresponding decrease in the elongation at break. Thus, while microstructural characterization indicates that only a small fraction, if any, of the vinyl clay is exfoliafed, the enhancement in mechanical properties is similar to that observed for iPP-exfoliated montmonillonite nanocomposites. Our compounding protocol is unable to effectively disperse the clay in the iPP at clay loadings greater than about 7.5\%. Therefore, the low frequency plateau in the melt elastic modulus and the solid tensile modulus increase with clay loading until 7.5\% but exhibit a nonmonotonic decrease at higher clay loadings.

}, issn = {0888-5885}, doi = {10.1021/ie071658p}, author = {Kumaraswamy, Guruswamy and Deshmukh, Yogesh S. and Agrawal, Vikrant V. and Nisal, Anuya} } @article { ISI:000259450800027, title = {Continuous flow nitration of salicylic acid}, journal = {Organic Process Research \& Development}, volume = {12}, number = {5}, year = {2008}, month = {SEP}, pages = {995-1000}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Continuous flow nitration of salicylic acid using HNO3/AcOH was studied in the SS316 tubular microreactor. At specific reaction conditions, complete conversion of the reactant was achieved in less than 7 min. It yielded only mononitro derivatives with a higher selectivity of 5-nitrosalicylic acid. Presence of the lower amount of acetic acid in the reaction mixture was seen to be detrimental, leading to precipitation of the desired product (5-nitrosalicylic acid). Reaction at higher temperatures yielded byproducts. The continuous mode operation using the system comprising the microdevices was demonstrated for 2 h with consistent composition at the outlet.

}, issn = {1083-6160}, doi = {10.1021/op800112u}, author = {Kulkarni, Amol A. and Nivangune, Nayana T. and Kalyani, Vishwanath S. and Joshi, Ramesh A. and Joshi, Rohini R.} } @article { ISI:000256603500023, title = {Controlled synthesis of ZnO from nanospheres to micro-rods and its gas sensing studies}, journal = {Talanta}, volume = {75}, number = {5}, year = {2008}, month = {JUN}, pages = {1315-1319}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

1D ZnO rods are synthesized using less explored hydrazine method. Here we find, besides being combustible hydrazine can also be used as a structure-directing agent. The ratio of zinc nitrate (ZN) to hydrazine is found to control the morphology of ZnO. At lower concentration of ZN as compared with hydrazine the morphology of ZnO is found to be spherical. As we increase the hydrazine content the morphology changes from spherical (diameter similar to 100 nm) to the elongated structures including shapes like Y, T as well dumbbell (diameter similar to 40 nm and length similar to 150 nm). Interestingly for more than 50\% of hydrazine ZnO micro-rods are formed. Such rods are of diameter similar to 120 mn having length of about 1 mu m for ZN to hydrazine ratio of 1:9, isolated as well as bundle of rods are seen in scanning electron microscopy (SEM). The X-ray diffraction (XRD) reveals the phase formation with average particle size of 37 nm as calculated using Scherrer{\textquoteright}s formula. The high-resolution transmission electron microscopy (HRTEM) is also done to confirm the d-spacing in ZnO. Gas sensing study for these samples shows high efficiency and selectivity towards LPG at all operating temperatures. Photoluminescence (PL) study for these samples is performed at room temperature to find potential application as photoelectric material. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Hydrazine, LPG sensor, Nanostructures, photoluminescence, ZnO}, issn = {0039-9140}, doi = {10.1016/j.talanta.2008.01.063}, author = {Navale, Shalaka C. and Gosavi, S. W. and Mulla, Imtiaz S.} } @article { ISI:000259755300059, title = {Effect of organic modifiers and silicate type on filler dispersion, thermal, and mechanical properties of ABS-Clay nanocomposites}, journal = {Journal of Applied Polymer Science}, volume = {110}, number = {4}, year = {2008}, month = {NOV}, pages = {2374-2383}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Acrylonitrile-butadiene-styrene (ABS)-clay composite and intercalated nanocomposites were prepared by melt processing, using Na-montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na-laponite clays. The polymer-clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T, of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt \% loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40-44 degrees C at 4 wt \% organoclay) is seen. The Young{\textquoteright}s modulus shows improvement, the elongation-at-break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young{\textquoteright}s modulus (E) correlates with the intercalation change in organoclay interlayer separation (Delta d(001)) as influenced by the chemistry of the modifier. Although ABS-laponite composites are exfoliated, the intercalated OMMT-based nanocomposites show greater improvement in modulus. (C) 2008 Wiley Periodicals, Inc. J Appl Polym Sci 110:2374-2383, 2008

}, keywords = {clay, filler, mechanical, structure characterization, styrene-butadiene}, issn = {0021-8995}, doi = {10.1002/app.28699}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article { ISI:000255689100002, title = {Effect of repeated in vitro sub-culturing on the virulence of metarhizium anisopliae against helicoverpa armigera (Lepidoptera : Noctuidae)}, journal = {Biocontrol Science and Technology}, volume = {18}, number = {4}, year = {2008}, month = {MAY}, pages = {337-355}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

The effect of repeated conidial sub-culturing of Metarhizium anisopliae on its virulence against Helicoverpa armigera (Hbner) was studied. The LT(50) observed against third instar larvae of H. armigera for the first sub-culture was 3.4 days; it increased to 4.5 and 5.6 days for the 20th and the 40th sub-cultures, respectively. The LT50 values after passage of the 40th sub-culture on H. armigera decreased to 4.4 and 3.7 days for the 40th (first in vivo) and the 40th (fifth in vivo) passages, respectively. Similarly, the LC(50) of M. anisopliae towards third instar larvae of H. armigera increased from the first sub-culture (0.17x10(4)) to (3.0x10(4)) for the 40th conidial transfers on potato dextrose agar and again decreased to 0.74x10(4) and 0.23x10(4) in the 40th (first in vivo) and the 40th (fifth in vivo) passage, respectively. Similar trends for LC(50) and LT(50) values were seen when sugarcane woolly aphid, Ceratovacuna lanigera Zehntner was used as a host. Significant variation in appressorium formation and cuticle-degrading enzyme production such as chitinase, chitin deacetylase, chitosanase and protease during subsequent sub-culturing and passage through H. armigera was observed. Though there was no effect on internal transcribed spacer (ITS) sequence pattern, interestingly, in randomly amplified polymorphic DNA (RAPD), significant differences in the band intensities and in the banding pattern for different sub-cultures of M. anisopliae were observed. As stable virulence towards the insect pest is desirable for commercialisation of a mycoinsecticide, such changes in virulence due to repeated in vitro transfer need to be monitored and minimised.

}, keywords = {appressorium formation, chitin deacetylase, chitinase, Helicoverpa armigera, in vitro sub-culturing, Lipase, Metarhizium anisopliae, Protease}, issn = {0958-3157}, doi = {10.1080/09583150801935650}, author = {Nahar, Pallavi B. and Kulkarni, Shuklangi A. and Kulye, Mahesh S. and Chavan, Santosh B. and Kulkarni, Girish and Rajendran, Armugham and Yadav, Priya D. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000252339100015, title = {Efficient method for the synthesis of acylals from aldehydes under solvent-free conditions catalyzed by antimony trichloride}, journal = {Synthetic Communications}, volume = {38}, number = {1}, year = {2008}, month = {MAY}, pages = {128-134}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A mild and efficient method has been developed for the preparation of acylals from aldehydes catalyzed by antimony trichloride under solvent-free conditions in very good to excellent yields. The easy availability, low cost, and ease of handling of the catalyst make this procedure especially attractive for large-scale synthesis.

}, keywords = {acetic anhydride, Acylals, aldehydes, antimony trichloride, solvent-free conditions}, issn = {0039-7911}, doi = {10.1080/00397910701651284}, author = {Bhattacharya, Asish K. and Mujahid, Mohammad and Natu, Arvind A.} } @article { ISI:000254416300010, title = {Enhanced shape anisotropy and magneto-optical birefringence by high energy ball milling in NixFe1-xFe2O4 ferrofluids}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {320}, number = {6}, year = {2008}, month = {MAR}, pages = {815-820}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Ferrofluids belonging to the series NixFe1-xFe2O4 were synthesised by two different procedures-one by standard co-precipitation techniques, the other by co-precipitation for synthesis of particles and dispersion aided by high-energy ball milling with a view to understand the effect of strain and size anisotropy on the magneto-optical properties of ferrofluids. The birefringence measurements were carried out using a standard ellipsometer. The birefringence signal obtained for chemically synthesised samples was satisfactorily fitted to the standard second Langevin function. The ball-milled ferrofluids showed a deviation and their birefringence was enhanced by an order. This large enhancement in the birefringence value cannot be attributed to the increase in grain size of the samples, considering that the grain sizes of sample synthesised by both modes are comparable; instead, it can be attributed to the lattice strain-induced shape anisotropy(oblation) arising from the high-energy ball-milling process. Thus magnetic-optical (MO) signals can be tuned by ball-milling process, which can find potential applications. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {birefringence, Co-precipitation, ferrofluid, HEBM}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2007.08.032}, author = {Nair, Swapna S. and Xavier, Francis and Joy, Pattayil Alias and Kulkarni, S. D. and Anantharaman, Maliemadom R.} } @article { ISI:000255107700017, title = {EPR and DRS evidence for NO2 sensing in Al-doped ZnO}, journal = {Sensors and Actuators B-Chemical}, volume = {130}, number = {2}, year = {2008}, month = {MAR}, pages = {668-673}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Zinc oxide (ZnO) is a well-known semiconducting multifunctional material wherein properties right from the morphology to gas sensitivity can be tailor-made by doping or surface modification. Aluminum (Al)-incorporated porous zinc oxide (AI:ZnO) exhibits good response towards NO2 at low-operating temperature. The NO2 gas concentration as low as 20 ppm exhibits S = 17\% for 5 wt. \% Al-incorporated ZnO. The NO2 response increases with operating temperature and concentration and reaches to its maximum at 300 degrees C without any interference from other gases such as SO3, HCl, LPG and alcohol. Physico-chemical characterization likes differential thermogravimetric analysis (TG-DTA) electron paramagnetic resonance (EPR) and diffused reflectance spectroscopy (DRS) have been used to understand the sensing behavior for pure and A]-incorporated ZnO. The TG-DTA depicts formation of ZnO phase at 287 degrees C. The EPR study reveals distinct variation for O- (g=2.003) and Zn interstitial (g = 1.98) defect sites in pure and Al:ZnO. The DRS studies elucidate signature of adsorbed NO, species in aluminium-incorporated zinc oxide indicating its tendency to adsorb these species even at low temperatures. This paper is an attempt to correlate the gas sensing behavior with the physico-chemical studies such as EPR and DRS. (c) 2007 Published by Elsevier B.V.

}, keywords = {aluminum doping, DRS, EPR, NO2 sensor, ZnO}, issn = {0925-4005}, doi = {10.1016/j.snb.2007.10.055}, author = {Navale, Shalaka C. and Ravi, V. and Srinivas, D. and Mulla, Imtiaz S. and Gosavi, S. W. and Kulkarni, S. K.} } @article { ISI:000253042200004, title = {Facile and highly selective deprotection of tert-butyldimethyl silyl ethers using sulfated SnO2 as a solid catalyst}, journal = {Synthetic Communications}, volume = {38}, number = {3}, year = {2008}, month = {JAN}, pages = {346-353}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Highly selective deprotection of tert-butyldimethylsilyl ethers at room temperature has been described using sulfated SnO2 as an efficient solid catalyst.

}, keywords = {deprotection, sulfated SnO2, TBDMS ethers}, issn = {0039-7911}, doi = {10.1080/00397910701767056}, author = {Bhure, Mahesh H. and Kumar, Indresh and Natu, Arun D. and Rode, Chandrashekhar V.} } @conference { ISI:000257623000188, title = {Gelation of regenerated fibroin solution}, booktitle = {15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology}, series = {AIP CONFERENCE PROCEEDINGS}, volume = {1027}, year = {2008}, note = {15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, Monterey, CA, AUG 03-08, 2008}, month = {AUG}, pages = {573-575}, publisher = {Amer Inst Physics, 2 Huntington Quadrangle, STE 1NO1, Melville, NY 11747-4501 USA}, organization = {Amer Inst Physics, 2 Huntington Quadrangle, STE 1NO1, Melville, NY 11747-4501 USA}, address = {Monterey, CA.}, abstract = {

Silk fibroin is a high molecular weight multiblock ampiphillic protein known for its ability to form high strength fibers. It is also biocompatible; silk sutures have been traditionally used for many centuries. Recently, there has been much interest in making silk hydrogels for applications ranging from tissue engineering to controlled delivery. Fibroin gels can be formed from aqueous solutions by changing one or more state variables such as pH, temperature and ionic strength. In this work we present our investigations on the gelation of aqueous fibroin solutions derived from Bombyx Mori silk using light scattering, confocal microscopy and rheological techniques.

}, keywords = {dynamic light scattering, Rheology, silk fibroin gel}, isbn = {978-0-7354-0549-3}, issn = {0094-243X}, author = {Nagarkara, Shailesh and Lele, Ashish K. and Chassenieux, Christophe and Nicolai, Taco and Durand, Dominique}, editor = {Co, A. and Leal, L. G. and Colby, R. H. and Giacomin, A. J.} } @article { ISI:000252293400023, title = {Hydrogenation activity and selectivity behavior of supported palladium nanoparticles}, journal = {Catalysis Communications}, volume = {9}, number = {3}, year = {2008}, month = {MAR}, pages = {441-446}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Enhancement in activity and selectivity of catalytic hydrogenation using supported nanosize palladium catalyst has been investigated. Pd/C catalyst prepared in the presence of polyvinyl pyrrolidone (PVP) as a stabilizer gave Pd particle size in a narrow range of 3-5 nm. While, evaluating for hydrogenation of 2-butyne-1,4-diol, the rate enhancement was found to be 10 times higher as compared to the conventional (bulk) Pd catalysts. A proper choice of stabilizer (PVP) giving small particle size as well as highly dispersed nature of nano particles were the major factors for such a dramatic enhancement of activity. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {butynediol, Catalytic hydrogenation, nanosize palladium, Selective hydrogenation, SEM-EDX analysis, size distribution, supported Pd nanoparticles}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.07.023}, author = {Nadgeri, J. M. and Telkar, M. M. and Rode, C. V.} } @article { ISI:000254479300039, title = {Immobilization of Candida rugosa lipase on poly(allyl glycidyl ether-co-thylene glycol dimethacrylate) macroporous polymer particles}, journal = {Bioresource Technology}, volume = {99}, number = {9}, year = {2008}, month = {JUN}, pages = {3623-3629}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Macroporous polymer particles containing surface epoxy groups were synthesized for immobilization of Candida rugosa lipase (CRL). The effect of incorporation of two different sets of monomers [allyl glycidyl ether (AGE) and glycidyl methacrylate (GMA)] and the effect of crosslinking density on immobilization of lipase were studied. AGE-co-EGDM polymers gave higher binding and expression of lipase than GMA-co-EGDM polymers. Optimization of immobilization parameters was done with respect to immobilization time and enzyme loading. Amongst AGE-co-EGDM polymer series, AGE-150 polymer found to give maximum lipase activity yield and therefore evaluated for temperature, pH and storage stability. Under optimum conditions, AGE-150 polymer gave 78.40\% of activity yield. Immobilized lipase on AGE-150 showed a broader pH, higher temperature and excellent storage stability. (C) 2007 Published by Elsevier Ltd.

}, keywords = {Candida rugosa lipase, Enzyme immobilization, Epoxy-activated support}, issn = {0960-8524}, doi = {10.1016/j.biortech.2007.07-035}, author = {Vaidya, Bhalchandra K. and Ingavle, Ganesh C. and Ponrathnam, S. and Kulkarni, B. D. and Nene, Sanjay N.} } @article { ISI:000252803200006, title = {Inactivation of polygalacturonase and pectate lyase produced by pH tolerant fungus Fusarium moniliforme NCIM 1276 in a liquid medium and in the host tissue}, journal = {Microbiological Research}, volume = {163}, number = {1}, year = {2008}, month = {JAN}, pages = {51-62}, publisher = {ELSEVIER GMBH, URBAN \& FISCHER VERLAG}, type = {Article}, address = {OFFICE JENA, P O BOX 100537, 07705 JENA, GERMANY}, abstract = {

Fusarium moniliforme NCIM 1276 produced pH dependent an extracellular potygalacturonase (PG) and pectate lyase (PL) at pH 5 and pH 8, respectively. In the extracellular medium about 20.3\% PG and 54\% of PL protein concentrations were present in the active state at pH 5 and pH 8, respectively, whereas in intracelluarly, more than 86\% of both protein contents remained in the active state at all pH tested. We found two possible reasons, end-product inhibition and effect of environmental. pH on conformation of the proteins after their release into the medium. Additionally, in infected tomato and cauliflower plants, the fungus secreted similar proteins which were located near to the epidermal and vascular regions of the hypocotyts. In infected tissues, between 26.9\% and to 41.5\% of PG and only 0.84\% - 13.4\% of PL protein concentrations were present in active state. Thus, the medium/cell sap pH and concentrations of substrate/end products seem to play an important role in fungal invasion during plant pathogenesis are discussed with current literature. (c) 2006 Elsevier GmbH. All rights reserved.

}, keywords = {Fusarium moniliforme, pathogenesis, pectate lyase, polygatacturonase}, issn = {0944-5013}, doi = {10.1016/j.micres.2006.03.004}, author = {Niture, Suryakant K. and Kumar, Ameeta R. and Parab, Pradeep B. and Pant, Aditi} } @article { ISI:000253700400019, title = {Integrated process for extraction and purification of alcohol dehydrogenase from Baker{\textquoteright}s yeast involving precipitation and aqueous two phase extraction}, journal = {Biochemical Engineering Journal}, volume = {38}, number = {3}, year = {2008}, month = {MAR}, pages = {414-420}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The potential of aqueous two phase extraction for the purification of alcohol dehydrogenase (ADH) from Baker{\textquoteright}s yeast (Saccharomyces cerevisiae) is demonstrated. An integrated process involving precipitation followed by aqueous two phase extraction (ATPE) is used for effective recovery of the enzyme. This is carried out in two schemes. In the first scheme, ammonium sulphate precipitation is carried out followed by ATPE of the precipitate after suspending it in buffer. While the second scheme involves polyethylene glycol precipitation followed by ATPE of the supernatant. The effect of various process parameters such as molecular weight of polymer, tie line length, phase volume ratio and neutral salt is investigated for enhancing the activity recovery of ADH. First scheme resulted in about 85\% enzyme activity recovery of ADH with purification factor of 4.2 while the second scheme about 90\% enzyme activity recovery with 6.6-fold purification. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Alcohol dehydrogenase, aqueous two phase extraction, enzyme extraction, Precipitation, Purification, Yeast}, issn = {1369-703X}, doi = {10.1016/j.bej.2007.08.007}, author = {Madhusudhan, M. C. and Raghavarao, K. S. M. S. and Nene, Sanjay} } @article {43246, title = {Introduction to the density matrix renormalization group ansatz in quantum chemistry}, journal = {Frontiers in Quantum Systems in Chemistry and Physics}, volume = {18}, year = {2008}, month = {JAN}, pages = {49-65}, type = {Proceedings Paper}, abstract = {The Density Matrix Renormalisation Group (DMRG) is an electronic structure method that has recently been applied to ab-initio quantum chemistry. Even at this early stage, it has enabled the solution of many problems that would previously have been intractable with any other method, in particular, multireference problems with very large active spaces. Historically, the DMRG was not originally formulated from a wavefunction perspective, but rather in a Renormalisation Group (RG) language. However, it is now realised that a wavefunction view of the DMRG provides a more convenient, and in some cases more powerful, paradigm. Here we provide an expository introduction to the DMRG ansatz in the context of quantum chemistry.}, author = {Chan, Garnet Kin-Lic and Dorando, Jonathan J. and Ghosh, Debashree and Hachmann, Johannes and Neuscamman, Eric and Wang, Haitao and Yanai, Takeshi} } @article { ISI:000254798300018, title = {Lipases catalyzed enantioselective hydrolysis of (R,S)-methyl 1,4-benzodioxan-2-carboxylate intermediate for (S)-doxazosin mesylate}, journal = {World Journal of Microbiology \& Biotechnology}, volume = {24}, number = {4}, year = {2008}, month = {APR}, pages = {577-579}, publisher = {SPRINGER}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

(S)-1,4-benzodioxan-2-carboxylic acid-1 is used as starting compound for the production of the more effective (S) enantiomer of the drug doxazosin mesylate. The catalytic ability of some commercial lipases for preparations of (S) enantiomer of 1 from (+/-) methyl 1,4-benzodioxin-2-carboxylate-2 is reported. Lipases from bacterial sources were more successful in resolving the ester than those from the yeast lipases. About 85\% enantiomerically pure ester was achieved by lipase from alcaligenes sp.

}, keywords = {1, 4-benzodioxan-2-carboxylate, 4-benzodioxan-2-carboxylic acid, doxazosin, Enantioselectivity, Lipases}, issn = {0959-3993}, doi = {10.1007/s11274-007-9504-6}, author = {Varma, Rita and Kasture, Sangita M. and Nene, Sanjay and Kalkote, Uttam R.} } @article { ISI:000254833600003, title = {Media optimization for the production of cephalosporin C acylase from a novel bacterial source: alcaligenes xylosoxidans MTCC*491}, journal = {Research Journal of Biotechnology}, volume = {3}, number = {1}, year = {2008}, month = {FEB}, pages = {16-21}, publisher = {RESEARCH JOURNAL BIOTECHNOLOGY}, address = {SECTOR A-80, SCHEME NO 54, VIJAY NAGAR, A B ROAD, INDORE, 452 010 MP, INDIA}, abstract = {

The Gram-negative bacterium Alcaligenes xylosoxidans MTCC *491 has been studied for the production of cephalosporin C acylase (CCA), a pharmaceutically important enzyme. The enzyme hydrolyses cephalosporin C (CPC), a natural product, to 7-aminocephalosporanic acid, a key intermediate in the production of semisynthetic cephalosporin antibiotics. Effect of medium, pH, temperature, carbon source, nitrogen source and incubation time, on the production of CCA was studied. 7.7 IU/ml activity was obtained when Luria Bertani broth (LB) was used as a fermentation medium. Glucose and galactose increased the enzyme activity by 9 \% and 22 \%, while all the nitrogen sources tested showed a repressive effect. Maximum CCA activity was observed around the 5(th) day of incubation indicating potential role of CCA in secondary metabolism. pH 8.0 and 40 degrees C were found to be the optimum conditions for acylase activity.

}, keywords = {alcaligenes xylosoxidans MTCC*491, cephalosporin C (CPC), cephalosporin C acylase (CCA), fermentation carbon source, nitrogen source}, issn = {0973-6263}, author = {Nupura, Hirve and Asmita, Tingare and Sharat, B. and Asmita, Prabhune} } @article { ISI:000260431100004, title = {Monte carlo simulations of chain dimensions and conformational properties of various poly(n-alkyl methacrylates) in solution}, journal = {Journal of Macromolecular Science Part B-Physics}, volume = {47}, number = {6}, year = {2008}, month = {OCT}, pages = {1075-1086}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Rotational Isomeric State (RIS) Metropolis Monte Carlo (RMMC) simulations of the conformational properties and chain dimensions of a series of chemically different poly(n-alkyl methacrylates) including poly(methyl methacrylate), poly(n-butyl methacrylate), poly(n-hexyl methacrylate), and poly(phenyl methacrylate), in the theta state were investigated, and (r(2)/M)(1/2), (s(2)/M)(1/2) and C(n) were calculated and compared in order to obtain fundamental understanding of the influence of the chemical structure. Simulations were conducted for different molecular weights. Results obtained from the simulations are compared with experimentally obtained dimensions in the literature using the Mark-Houwink relationship as well as, in some cases, data available from direct determinations in theta solvents. Good agreement between simulation and experimental data was obtained. The backbone conformation is predominantly trans in these polymers. Increase in bulkiness and rigidity of the substituting acrylate side group results in an increase in trans and a decrease in gauche backbone conformer population. In the case of rotatable bonds in the side-group structure, increase in rigidity of the side group leads to a decrease in the trans population, although this effect is not uniformly observed.

}, keywords = {chain dimensions, Monte Carlo simulation, polymethacrylate, theta solvent}, issn = {0022-2348}, doi = {10.1080/00222340802266397}, author = {Karyappa, Rahul B. and Natarajan, Upendra} } @article { ISI:000258965100011, title = {Mossbauer spectroscopic investigations of nanophase iron oxides synthesized by thermal plasma route}, journal = {Materials Characterization}, volume = {59}, number = {9}, year = {2008}, month = {SEP}, pages = {1215-1220}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Magnetic nanoparticles of iron oxide were synthesized by transferred arc plasma induced gas phase condensation method. Structural, morphological and magnetic studies of the as synthesized powder were carried out using X-ray diffraction, transmission electron microscopy and Mossbauer spectroscopy. These studies have revealed the simultaneous nucleation and condensation of different magnetic phases with a broad size distribution of the nanoparticles which is peaked at 30-50 nm and ranges from 10 nm to 80 nm. 57 Fe Mossbauer spectra recorded at various temperatures (5 K-300 K) in presence of external magnetic field (at 5 K) have suggested the presence of different phases of iron oxide with sizable amounts of gamma-Fe2O3 and alpha-Fe2O3 in addition to Fe3O4. The relative concentrations of these phases have been obtained by a self consistent spectral area analysis and were found to be 44:22:34 (\%). (C) 2007 Elsevier Inc. All rights reserved.

}, keywords = {iron oxides, Mossbauer spectroscopy, phase analysis, plasma synthesis}, issn = {1044-5803}, doi = {10.1016/j.matchar.2007.10.003}, author = {Nagar, Harshada and Kulkarni, Naveen V. and Karmakar, Soumen and Sahoo, B. and Banerjee, Indrani and Chaudhari, P. S. and Pasricha, R. and Das, A. K. and Bhoraskar, S. V. and Date, Sadgopal K. and Keune, W.} } @article { ISI:000254004400057, title = {New poly(phenylene oxide)/polystyrene blend nanocomposites with clay: intercalation, thermal and mechanical properties}, journal = {Journal of Applied Polymer Science}, volume = {108}, number = {3}, year = {2008}, month = {MAY}, pages = {1818-1828}, publisher = {JOHN WILEY \& SONS INC}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

We present the first study and results on the preparation and characterization of montmorillonite clay filter based polymer blend nanocomposites of the miscible poly(phenylene oxide)/polystyrene blend. Intercalated nanocomposites, prepared by a melt-processing method with 2-6 wt \% commercially available organically modified sodium montmorillonite, have been characterized with wide-angle X-ray diffraction, transmission electron microscopy analysis, thermal analysis (thermogravimetric analysis and differential scanning calorimetry), and mechanical tensile tests. We show that nanocomposites can be successfully prepared in a batch mixer at temperatures much below the conditions conventionally used for this blend without organic degradation. Thermal stability is enhanced by nanoscale hybrid formation. The level of intercalation (change in the d-spacing) does not change with the clay loading. Better dispersion of clay in the blend matrix has been observed at a low level of clay content. The nanocomposites show improved tensile modulus (by 31\%) in comparison to the blend, whereas the tensile strength (stress at break) and elongation decrease in the presence of the filler with an increase in the clay loading. The Halpin-Tsai model is able to predict the modulus of the nanocomposites in very good agreement with the experimental data. (c) 2008 Wiley Periodicals, Inc.

}, keywords = {mechanical properties, Nanocomposites, organoclay, poly(phenylene oxide), Polystyrene, Thermal properties}, issn = {0021-8995}, doi = {10.1002/app.27743}, author = {Tiwari, Rajkiran R. and Khilar, Kartic C. and Natarajan, Upendra} } @article { ISI:000254698300033, title = {Novel technique to prepare LiTaO3 at low temperature}, journal = {Ceramics International}, volume = {34}, number = {3}, year = {2008}, month = {APR}, pages = {669-670}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Firstly, fresh tantalum hydroxide was precipitated from TaF5 solution using an aqueous ammonium hydroxide under basic conditions. Then a simple procedure of mixing lithium and tantalum hydroxides together and heating at a low temperature (450 degrees C) produced pure ultrafine single phase LiTaO3 (LT). This is the lowest temperature so far reported for the formation of LT in the literature. The phase content and lattice parameters are determined by X-ray diffraction (XRD). The average particle size and morphology were studied by transmission electron microscopy (TEM). (c) 2006 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

}, keywords = {chemical synthesis X-ray diffraction, Electron microscopy, electronic materials, LiTaO3}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2006.11.003}, author = {Muthurajan, H. and Kumar, H. H. and Natarajan, N. and Ravi, V.} } @article { ISI:000256183700015, title = {Phosphotungstic acid on silica with modified acid sites as a solid catalyst for selective cleavage of tert-butyldimethylsilyl ethers}, journal = {Catalysis Communications}, volume = {9}, number = {9}, year = {2008}, month = {MAY}, pages = {1863-1868}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The strength and nature of acid sites of bulk phosphotungstic acid could be modified after dispersing it on silica support which was characterized by XRD, ammonia TPD and (31)P MAS NMR techniques. This solid acid catalyst was found to be highly selective for the cleavage of tert-butyldimethylsilyl ethers at room temperature. The catalyst was easily recovered by filtration and could be reused for several times without loss of any activity giving a TON of 9.5 x 10(5). (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Ammonia TPD, Catalytic cleavage, reaction pathway, solid acid, tert-butyldimethylsilyl ethers, XRD}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.03.017}, author = {Bhure, Mahesh H. and Kumar, Indresh and Natu, Arun D. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article { ISI:000255803800012, title = {Production and single step purification of cyclodextrin glycosyltransferase from alkalophilic bacillus firmus by ion exchange chromatography}, journal = {Biochemical Engineering Journal}, volume = {39}, number = {3}, year = {2008}, month = {MAY}, pages = {510-515}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Production and purification of starch digesting cyclodextrin glycosyl transferase (CGTase) from alkalophilic Bacillus firmus was investigated. Fermentation was carried out in 141 bioreactor at 28 degrees C using a medium containing dextrin, yeast extract, peptone, (NH4)H2PO4 and MgSO4.7H(2)O. The extracellular enzyme was concentrated by tangential flow ultrafiltration. The concentrated enzyme was chromatographed using DEAE-sepharose and phenyl sepharose. DEAE-sepharose could be used to purify CGTase in a single step with 23.1 fold purification and 80.6\% recovery. The enzyme obtained had homogeneity and the molecular weight was 76 kDa confirmed by SDS-PAGE. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {alkalophilic, Bacillus firmus, CGTase, cyclodextrin, Purification}, issn = {1369-703X}, doi = {10.1016/j.bej.2007.09.020}, author = {Savergave, Laman S. and Mule, Santosh S. and Jogdand, Vitthal V. and Nene, Sanjay N. and Gadre, Ramchandra V.} } @article { ISI:000253767100014, title = {Rapid phase-controlled microwave synthesis of nanostructured hierarchical tetragonal and cubic beta-In2S3 dandelion flowers}, journal = {Chemical Physics Letters}, volume = {452}, number = {4-6}, year = {2008}, month = {FEB}, pages = {301-305}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Phase controlled synthesis of hierarchical nanostructured beta-In2S3 dandelion flowers is realized by a rapid microwave solvothermal process using indium metal, nitric acid and thiourea as precursors. The tetragonal and cubic phases of the compound have been successfully and separately stabilized in the same type of dandelion morphology by using aqueous-mediated and methanol-mediated synthesis, respectively. The possible mechanism responsible for phase control is discussed. Optical properties of the flowers as well as their hydrogen generation capability by photodecomposition of H2S under visible light are also reported. (c) 2007 Elsevier B.V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2007.12.048}, author = {Naik, S. D. and Jagadale, Tushar C. and Apte, S. K. and Sonawane, S. and Kulkarni, M. V. and Patil, S. I. and Ogale, Satishchandra B. and Kale, B. B.} } @article { ISI:000255455300004, title = {Reaction kinetics of liquid phase air oxidation of p-cresol to p-hydroxybenzaldehyde}, journal = {Applied Catalysis A-General}, volume = {339}, number = {1}, year = {2008}, month = {APR}, pages = {28-35}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The kinetics of liquid phase oxidation of p-cresol to p-hydroxybenzaldehyde has been investigated using insoluble cobalt oxide (CO3O4) catalyst at oxygen partial pressures in the range 0.1-1.5 MPa, reaction temperatures 333-393 K, p-cresol concentrations 0.49-1.53 kmol/m(3) and catalyst loadings 0.38-3.03 kg/m(3). The effects of oxygen partial pressure, reaction temperature, p-cresol concentration and catalyst loading on the initial rate of reaction have been studied. The initial rate varied linearly with catalyst loading up to 1.5 kg/m(3) beyond which it was independent of the catalyst loading while first-order dependence was observed with variation in oxygen partial pressure. A rate expression has been proposed considering Langmuir-Hinshelwood (LH) type mechanism, based on the initial rate data. A batch reactor model was also developed based on the kinetics studied and the concentration time profile predicted by the model was in good agreement with the experimental data. The activation energy for the liquid phase oxidation of p-cresol was found to be 39.6 kJ/mol. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Co3O4, kinetics, p-cresol oxidation, XPS, XRD}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.01.006}, author = {Kshirsagar, V. S. and Nadgeri, J. M. and Tayade, P. R. and Rode, C. V.} } @article {42460, title = {Reaction of huisgen zwitterion with diaryl ketones leading to the facile synthesis of mono- and bis(alkoxycarbonyl)hydrazones}, journal = {Synthesis-Stuttgart}, year = {2008}, month = {MAR}, pages = {1078-1084}, abstract = {

The Huisgen zwitterion, generated from triphenylphosphine and dialkyl azodicarboxylates, afforded upon reaction with diaryl ketones both mono- and bis(alkoxycarbonyl)hydrazones, depending on the reaction conditions.

}, doi = {10.1055/s-2008-1032125}, author = {Nair, Vijay and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh} } @article { ISI:000259342400009, title = {Size dependent coordination behavior and cation distribution in MgAl2O4 nanoparticles from Al-27 solid state NMR studies}, journal = {Journal of Physical Chemistry C}, volume = {112}, number = {38}, year = {2008}, month = {SEP}, pages = {14737-14744}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nanoparticles of spinel-type oxides such as ferrites offer great advantages and applications in many important areas. Decreasing the size of the particles to nanometer size will increase the surface-to-volume ratio and this will strongly influence the physical and chemical properties of these materials. For magnetic nanoparticles, the exchange interactions at the surface of a particle will be different from those inside due to changes in the coordination behavior at the surface. Therefore, studying and understanding the coordination and distribution behavior of the different metal ions in the nanoparticles of spinel-type oxides is very important. Solid state NMR is a useful and important technique to obtain information on local structural variations. The degree of the distribution of the Al3+ ions in the tetrahedral and octahedral sites in the nanoparticles of the nonmagnetic spinet MgAl2O4 having different particle sizes has been determined by Al-27 magic-angle spinning (MAS) NMR spectroscopy. It has been observed that the inversion parameter decreases with increasing particle size. Apart from the usual tetrahedral and octahedral coordinations present in the bulk material, the presence of five- and three-coordinated At has been observed in nanoparticles with sizes less than 18 nm and a second octahedral coordination is observed for nanoparticles of larger sizes.

}, issn = {1932-7447}, doi = {10.1021/jp800412k}, author = {Sreeja, V. and Smitha, T. S. and Nand, Deepak and Ajithkumar, Thalasseril G. and Joy, Pattayil Alias} } @article { ISI:000256839100021, title = {Stereoselective synthesis of beta-C-Allyl- and beta-C-propargyl-D-arabinofuranosides}, journal = {Synthesis-Stuttgart}, number = {11}, year = {2008}, month = {JUN}, pages = {1783-1787}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The stereoselective synthesis of beta-configured C-allyl- and C-propargyl-D-arabinofuranosides (4,7-anhydro-1,2,3-deoxy-D-gluco-oct-1-enitols and -oct-1-ynitols) was addressed by employing allylation/propargylation of a dialdofuranose under aqueous Barbier reaction conditions and acid-catalyzed furan ring transposition of 5-O-mesyl-manno-oct-7-eno- or 5-O-mesyl-manno-oct-7-ynofuranoside derivatives.

}, keywords = {Allylation, Barbier reaction, C-glycoside, D-mannose, propargylation, Ring transposition}, issn = {0039-7881}, doi = {10.1055/s-2008-1067016}, author = {Ramana, C. V. and Narute, Sachin B. and Gonnade, Rajesh G. and Patil, Rahul S.} } @article { ISI:000253170200010, title = {Stereoselective synthesis of the C33-C44 fragment of palau{\textquoteright}amide}, journal = {Tetrahedron Letters}, volume = {49}, number = {5}, year = {2008}, month = {JAN}, pages = {786-789}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient stereoselective synthesis of the C33-C44 fragment of palau{\textquoteright}amide is described using a Sharpless asymmetric epoxidation, a regioselective nucleophilic ring opening of the epoxide, a Grignard reaction and a Luche stereoselective reduction of a keto compound as the key steps. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Cytotoxic, Luche{\textquoteright}s stereoselective reduction, palau{\textquoteright}amide, Sharpless asymmetric epoxidation, Stereoselective}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.11.200}, author = {Mohapatra, Debendra K. and Nayak, Sabita} } @article { ISI:000262306600016, title = {Studies on the effect of glass transition on the crystalline transition in syndiotactic polystyrene - solvent complexes}, journal = {Macromolecular Symposia}, volume = {273}, year = {2008}, note = {7th Conference on Polymer Solvent Complexes and Intercalates, Marrakech, MOROCCO, MAY 21-23, 2008}, month = {NOV}, pages = {109-114}, publisher = {WILEY-V C H VERLAG GMBH}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Amorphous syndiotactic polystyrene (sPS) was crystallized at room temperature in Norbornadiene (bicyclo[2,2,1]-hepta-2,5-diene), Mesitylene (1,3,5-Trimethyl benzene), 3-Carene (3,7,7-trimethyl bicyclo[4,1,0]hept-3-ene) and DMN (1,4-Dimethylnaphthalene) to form the sPS-solvent complex (h form) with respective solvent molecules. In situ HTFTIR studies showed that the delta form to gamma form transformation temperature occurs well below the glass transition temperature of sPS, which is depressed due to the presence of solvent in the amorphous phase; higher the solvent content in the complex, lower the transition temperature. Glass transition temperatures determined by Modulated differential scanning calorimetry (MDSC) coincide with the transition temperatures, indicating that the delta form transforms into gamma form at the glass transition temperature for these complexes. Such a behavior is very different from the behaviour of the sPS- solvent complexes formed by dichloromethane, chloroform, toluene, o-dichlorobenzene, decalin (cis-trans) etc. and for these complexes the transition occur well above the T(g).

}, keywords = {Crystallization, glass transition, infrared spectroscopy, Syndiotactic polystyrene}, issn = {1022-1360}, doi = {10.1002/masy.200851315}, author = {Naidu, Sudhakar and Ramesh, N. C.} } @article { ISI:000253740900005, title = {Synthesis and characterization of novel organo-montmorillonites}, journal = {Applied Clay Science}, volume = {38}, number = {3-4}, year = {2008}, month = {FEB}, pages = {203-208}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Sodium Montmorillonite (NaMMT) has been modified via cation exchange reaction using three different organic cations. Basal spacings, interlamellar structure and thermal stability of these organo-montmorillonites (OMMT) clays have been characterized using wide angle X-ray diffraction (WARD) and thermogravimetric analysis (TGA) techniques. Increase in the basal spacing due to organic modification is in good agreement with simple theoretical calculations based on van der Waals volume of the cationic ammonium ions. TGA characterization and analysis show that the amount of organic modifier in the OMMT{\textquoteright}s is in good agreement with theoretically calculated stoichiometric content expected for almost complete exchange of Na+ ions by organic cations. The OMMT{\textquoteright}s shows stepwise decomposition corresponding to initial weight loss from residual water desorption, followed by decomposition of the organic surfactant and the dehydroxylation of structural water of the montmorillonite layers. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Montmorillonite, organo-clays, organo-montmorillonite, surfactant}, issn = {0169-1317}, doi = {10.1016/j.clay.2007.05.008}, author = {Tiwari, Rajkiran R. and Khilar, Kartic C. and Natarajan, Upendra} } @article { ISI:000255313300010, title = {Thermal and mechanical properties of melt processed intercalated poly(methyl methacrylate)-organoclay nanocomposites over a wide range of filler loading}, journal = {Polymer International}, volume = {57}, number = {5}, year = {2008}, month = {MAY}, pages = {738-743}, publisher = {JOHN WILEY \& SONS LTD}, type = {Article}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

BACKGROUND: Poly(methyl methacrylate) (PMMA)-organoclay nanocomposites with octadecylammonium, ion-modified montmorillonite, prepared via melt processing, over a wide range of filler loading (2-16 wt\%) were investigated in detail. These hybrids were characterized for their dispersion structure, and thermal and mechanical properties, such as tensile modulus (E). break stress (sigma(brk)), percent break strain (epsilon(brk)) and ductility(J), using wide-angle X-ray diffraction, transmission electron microscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and tensile and impact tests. RESULTS: Intercalated nanocomposites were formed even in the presence of 16 wt\% clay (high loading) in PMMA matrix. PMMA intercalated into the galleries of the organically modified clay, with a change in d-spacing in the range 11-16 angstrom. TGA results showed improved thermal stability of the nanocomposites. The glass transition temperature (T-g) of the nanocomposites, from DSC measurements, was 2-3 degrees C higher than that of PMMA. The ultimate tensile strength and impact strength decreased with increasing clay fraction. Tensile modulus for the nanocomposites increased by a significant amount (113\%) at the highest level of clay fraction (16 wt\%) studied. CONCLUSION: We show for the first time the formation of intercalated PMMA nanocomposites with alkylammonium-modified clays at high clay loadings (\> 15wt\%). Tensile modulus increases linearly with clay fraction, and the enhancement in modulus is significant. A linear correlation between tensile strength and strainat-break is shown. Thermal properties are not affected appreciably. Organoclay can be dispersed well even at high clay fractions to form nanocomposites with superior bulk properties of practical interest. (c) 2007 Society of Chemical Industry.

}, keywords = {impact strength, mechanical properties, Nanocomposites, PMMA, Thermal properties}, issn = {0959-8103}, doi = {10.1002/pi.2402}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article { ISI:000257971900057, title = {Use of response surface optimization for the production of biosurfactant from rhodococcus spp. MTCC 2574}, journal = {Bioresource Technology}, volume = {99}, number = {16}, year = {2008}, month = {NOV}, pages = {7875-7880}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The production of biosurfactant from Rhodococcus spp. MTCC 2574 was effectively enhanced by response surface methodology (RSM). Rhodococcus spp. MTCC 2574 was selected through screening of seven different Rhodococcus strains. The preliminary screening experiments (one-factor at a time) suggested that carbon source: mannitol, nitrogen source: yeast extract and meat peptone and inducer: n-hexadecane are the critical medium components. The concentrations of these four media components were optimized by using central composite rotatable design (CCRD) of RSM. The adequately high R-2 value (0.947) and F score 19.11 indicated the statistical significance of the model. The optimum medium composition for biosurfactant production was found to contain mannitol (1.6 g/L), yeast extract (6.92 g/L), meat peptone (19.65 g/L), n-hexadecane (63.8 g/L). The crude biosurfactant was obtained from methyl tert-butyl ether extraction. The yield of biosurfactant before and after optimization was 3.2 g/L of and 10.9 g/L, respectively. Thus, RSM has increased the yield of biosurfactant to 3.4-fold. The crude biosurfactant decreased the surface tension of water from 72 mN/m to 30.8 mN/m (at 120 mg L-1) and achieved a critical, micelle concentration (CMC) value of 120 mg L-1. (C) 2008 Published by Elsevier Ltd.

}, keywords = {Biosurfactant, Medium optimization, Response surface methodology, Rhodococcus spp.}, issn = {0960-8524}, doi = {10.1016/j.biortech.2008.02.027}, author = {Mutalik, Snehal R. and Vaidya, Bhalchandra K. and Joshi, Renuka M. and Desai, Kiran M. and Nene, Sanjay N.} } @conference { ISI:000257237400015, title = {Variability among vitis vinifera cultivars to in vitro propagation}, booktitle = {Proceedings of the International Symposium on Grape Production and Processing}, series = {ACTA HORTICULTURAE}, number = {785}, year = {2008}, note = {International Symposium on Grape Production and Processing, Baramati, INDIA, FEB 06-11, 2006}, month = {MAY}, pages = {127-139}, publisher = {Agr \& Processed Food Prod Export Dev Author; Indian Farmers Fertilizer Cooperat Ltd; Maharashtra Agro Industries Dev Corp Ltd; Indian Council Agr Res; Natl Res Ctr Grapes; Federat Indian Chambers Commerce \& Ind; Natl Hort Board; Minist Food Proc Industrie}, organization = {Agr \& Processed Food Prod Export Dev Author; Indian Farmers Fertilizer Cooperat Ltd; Maharashtra Agro Industries Dev Corp Ltd; Indian Council Agr Res; Natl Res Ctr Grapes; Federat Indian Chambers Commerce \& Ind; Natl Hort Board; Minist Food Proc Industrie}, address = {Po Box 500, 3001 Leuven 1, Belgium}, abstract = {

Response of grapevines to tissue culture has been reported to be genotype dependent, hence it becomes imperative to optimize culture conditions for newly developed varieties or cultivars, needing a large scale planting but availability of sufficient planting stock is a constraint. In the present study, conditions for in vitro propagation of six popular table grape cultivars have been standardized. Single node stem segments of cultivars 2A-Clone of Thompson Seedless, Red Globe, Crimson Seedless, Thompson Seedless, Flame Seedless and Italia cultured on ten different basal media showed varied percentages of bud break and morphogenetic responses. The percentage of bud break varied among the six cultivars. Direct rooting at basal ends of single node segments was observed in all the cultivars except in Italia. Woody plant medium induced the highest response and Eriksson medium the least in all the cultivars tested. Rooted nodal segments with shoots in axils could be established into whole plants on potting. Six cultivars showed different optimum concentrations of growth regulators for induction of maximum number of multiple shoots in both primary as well as secondary nodal segments. Shoot proliferation could be enhanced by several fold in the majority of cultivars on culture of initial shoot clumps to glass bottles instead of culture tubes. Six cultivars showed significant differences in optimum requirement of nutrients and growth regulators for shoot elongation, in vitro and ex vitro rooting and survival rate. Tissue culture plants of all the six cultivars could establish successfully in a greenhouse.

}, keywords = {basal media, Grapevine, growth regulators, micropropagation, Tissue culture, Vitis}, isbn = {978-90-6605-268-0}, issn = {0567-7572}, author = {Barreto, M. S. and Nookaraju, A. and Joglekar, A. M. and Karibasappa, G. S. and Agrawal, Dinesh C.}, editor = {Adsule, P. G. and Sawant, I. S. and Shikhamany, S. D.} } @article { ISI:000274985000008, title = {Convenient synthesis of enantiomerically pure (R)-mexiletine using hydrolytic kinetic resolution method}, journal = {Tetrahedron-Asymmetry}, volume = {20}, number = {24}, year = {2009}, month = {DEC}, pages = {2814-2817}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Enantiopure (R)-mexiletine was prepared in a simple and practical way using hydrolytic kinetic resolution method of terminal epoxide by Jacobsen catalyst. High enantiomeric purity (98\% ee) was achieved and the method is well amenable to industrial scale-up. (C) 2009 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2009.11.014}, author = {Sasikumar, Murugesan and Nikalje, Milind D. and Muthukrishnan, Murugan} } @article { ISI:000271756700023, title = {Electronic decoupling of surface layers from bulk and its influence in oxidation catalysis: a molecular beam study}, journal = {Applied Surface Science}, volume = {256}, number = {2}, year = {2009}, note = {2nd International Conference on Physics at Surfaces and Interfaces (PSI2009), Puri, INDIA, FEB 23-27, 2009}, month = {OCT}, pages = {443-448}, publisher = {Inst Phys; Indian Assoc Cutivat Sci}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Interactions between oxygen and Pd-surfaces have important implications, especially towards oxidation reactions, and influence of subsurface oxygen to oxidation reactions is the focus of the present study. In our efforts to understand the above aspects, CO oxidation reactions have been carried out with mixed molecular beam (MB), consisting CO and O(2), on Pd(1 1 1) surfaces under a wide variety of conditions (T = 400-900 K, CO: O(2) = 7: 1 to 1: 10). A new aspect of the above reaction observed in the transient kinetics regime is the evidence for oxygen diffusion into Pd subsurface layers, and its significant influence towards CO oxidation at high temperatures (\>= 600 K). Interesting information derived from the above studies is the necessity to fill up the subsurface layers with oxygen atoms to a threshold coverage (theta(O-sub)), above which the reactive CO adsorption occurs on the surface and simultaneous CO(2) production begins. There is also a significant time delay (G) observed between the onset of oxygen adsorption and CO adsorption (and CO(2) production). Above studies suggest an electronic decoupling of oxygen covered surface and subsurface layers, which is slightly oxidized, from the metallic bulk, which induces CO adsorption at high temperatures and simultaneous oxidation to CO(2). (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Electronic decoupling, heterogeneous catalysis, molecular beam, Oxidation, Pd(111), Subsurface diffusion}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2009.06.107}, author = {Thirunavukkarasu, Kandasamy and Nagarajan, Sankaranarayanan and Gopinath, Chinnakonda S.} } @article { ISI:000268138200061, title = {Electronic structure and catalytic study of solid solution of GaN in ZnO}, journal = {Chemistry of Materials}, volume = {21}, number = {13}, year = {2009}, month = {JUL}, pages = {2973-2979}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Solid solutions of GaN in ZnO (Zn1-zGaz)(O1-xNx) (x and z \<= 0.15) have been prepared by simple solution combustion method, Except for minor changes in the lattice contraction, no significant change in the Wurtzite structure was observed. Raman and secondary ion mass spectrometry results show the direct Zn-N and Ga-N bonds in (Zn1-zGaz)(O1-xNx). Visible light absorption and XPS results demonstrate that N 2p states of nitride occupy the states above the O 2p valence band, and hence a change in optical band gap reduction occurs to similar to 2.5 eV from 3.37 eV for ZnO. Significant nitrogen fixation catalytic activity through NH3 formation has been observed at ambient pressure oil virgin (Zn1-zGaz)(O1-xNx) material, indicating its potential as a catalyst.

}, issn = {0897-4756}, doi = {10.1021/cm900682q}, author = {Mapa, Maitri and Thushara, K. S. and Saha, Biswajit and Chakraborty, Purushottam and Janet, C. M. and Viswanath, R. P. and Nair, C. Madhavan and Murty, K. V. G. K. and Gopinath, Chinnakonda S.} } @article { ISI:000265398300007, title = {Enhanced production of amidase from Rhodococcus erythropolis MTCC 1526 by medium optimisation using a statistical experimental design}, journal = {Journal of Industrial Microbiology \& Biotechnology}, volume = {36}, number = {5}, year = {2009}, month = {MAY}, pages = {671-678}, publisher = {SPRINGER HEIDELBERG}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

In the present work, statistical experimental methodology was used to enhance the production of amidase from Rhodococcus erythropolis MTCC 1526. R. erythropolis MTCC 1526 was selected through screening of seven strains of Rhodococcus species. The Placket-Burman screening experiments suggested that sorbitol as carbon source, yeast extract and meat peptone as nitrogen sources, and acetamide as amidase inducer are the most influential media components. The concentrations of these four media components were optimised using a face-centred design of response surface methodology (RSM). The optimum medium composition for amidase production was found to contain sorbitol (5 g/L), yeast extract (4 g/L), meat peptone (2.5 g/L), and acetamide (12.25 mM). Amidase activities before and after optimisation were 157.85 units/g dry cells and 1,086.57 units/g dry cells, respectively. Thus, use of RSM increased production of amidase from R. erythropolis MTCC 1526 by 6.88-fold.

}, keywords = {Amidase, Medium optimisation, Plackett-Burman screening, Response surface methodology, Rhodococcus erythropolis}, issn = {1367-5435}, doi = {10.1007/s10295-009-0536-9}, author = {Vaidya, Bhalchandra K. and Mutalik, Snehal R. and Joshi, Renuka M. and Nene, Sanjay N. and Kulkarni, Bhaskar D.} } @article { ISI:000270790500006, title = {Entrainer for batch distillation of acetic acid -water system}, journal = {Journal of Scientific \& Industrial Research}, volume = {68}, number = {10}, year = {2009}, month = {OCT}, pages = {871-875}, publisher = {NATL INST SCIENCE COMMUNICATION}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

Acetic acid-water system (AW) poses a challenge in reactive distillation, acetic acid purity and loss of acetic acid in aqueous solutions. Feasible separation of AW has been studied using entrainers but acetic acid loss in lean phase cannot be avoided. This study presents feasible region to operate column with toluene and benzene as entrainer for AW. Liquid-liquid equilibrium data and nature of tie line for ethyl acetate are given priority.

}, keywords = {Acetic acid, Batch distillation, Benzene, Entrainer, Toluene}, issn = {0022-4456}, author = {Gadekar, S. V. and Naik, R. V. and Kaul, S. N.} } @article { ISI:000264236700037, title = {Exploration of click reaction for the synthesis of modified nucleosides as chitin synthase inhibitors}, journal = {Bioorganic \& Medicinal Chemistry}, volume = {17}, number = {6}, year = {2009}, month = {MAR}, pages = {2433-2440}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Click reaction approach toward the synthesis of two sets of novel 1,2,3-triazolyl linked uridine derivatives 19a-19g and 21a-21g was achieved by Cu(I)-catalyzed 1,3-dipolar cycloaddition of 5{\textquoteright}-azido-5{\textquoteright}-deoxy-2{\textquoteright},3{\textquoteright}-O-(1-methylethylidene) uridine (17) with propargylated ether of phenols 18a-18g and propargylated esters 20a-20g. Structure of one of the representative compound 19d was unambiguously confirmed by X-ray crystallography. Chitin synthase inhibition study of all these compounds 19a-19g and 21a-21g was carried out to develop antifungal strategy. Compounds 19d, 19e, 19f, and 21f were identified as potent chitin synthase inhibitors by comparing with nikkomycin. Compounds 19a, 19b, 19c, 19d, 21a, and 21b showed good antifungal activity against human and plant pathogens. Compounds 19a, 19b, 19f, 21c, 21f, and 21g were identified as lead chitin synthase inhibitors for further modi. cations by comparing results of inhibition of growth, \% germ tube formation and chitin synthase activity. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {1, 2, 3-dipolar cycloaddition, 3-Triazole, 4-Disubstituted-1, 5 {\textquoteleft}-Azidouridine, Antifungal compounds, Chitin synthase activity, Click reaction, Uridine nucleosides}, issn = {0968-0896}, doi = {10.1016/j.bmc.2009.02.019}, author = {Chaudhary, Preeti M. and Chavan, Sayalee R. and Shirazi, Fazal and Razdan, Meenakshi and Nimkar, Prachi and Maybhate, Shailaja P. and Likhite, Anjali P. and Gonnade, Rajesh G. and Hazra, Braja G. and Deshpande, Mukund V. and Deshpande, Sunita R.} } @article { ISI:000271238900027, title = {Field emission properties of Al-doped ZnO nanostructures}, journal = {Journal of Nano Research}, volume = {5}, year = {2009}, month = {JAN}, pages = {231-237}, publisher = {TRANS TECH PUBLICATIONS LTD}, address = {LAUBISRUTISTR 24, STAFA-ZUERICH, CH-8712, SWITZERLAND}, abstract = {

Field emission from Al-doped ZnO nanostrcutures has been investigated in planar diode configuration under ultra high vacuum conditions. The Al-doped ZnO nanostructures were synthesized by co-precipitation method with varying aluminium concentrations. The as- synthesized product was characterized by x-ray diffraction, scanning electron microscope and energy dispersive x-ray analysis. The threshold field required to draw a current density of similar to 1 mu A/cm(2) was observed to be similar to 2.0 V/mu m and similar to 2.3 V/mu m for Al-doped ZnO nanostructures synthesized with aluminium concentrations of 1\% and 3\%, respectively. The Fowler- Nordheim (F-N) plots for both the specimens exhibit non-linear behaviour, which is observed to be specimen dependent. The nonlinearity observed in the F-N plots has been interpreted on the basis of the theory of electron emission from semiconductor emitters. The field enhancement factors, estimated from the slope of the F-N plots, are found to be similar to 9.3 x 10(3) and 3.9 x 10(3) for 1\% and 3\% Al-doped ZnO emitters, respectively. The high values of the field enhancement factor Suggest that the emission is from the nanostructures. The emission current stability measured at the preset value of similar to 2 mu A over a period of more than three hours is found to be fairly stable. The results indicate use of Al-doped ZnO nanostructures as promising emitters for field emission based devices.

}, keywords = {field emission, Fowler-Nordheim plots, Nanostructures, ZnO}, issn = {1662-5250}, author = {Navale, Shalaka C. and Sheini, Farid Jamali and Patil, Sandip S. and Mulla, Imtiaz S. and Joag, Dilip S. and More, Mahendra A. and Gosavi, Suresh W.} } @article {43365, title = {Human blood vessel-derived endothelial progenitors for endothelialization of small diameter vascular prosthesis}, journal = {Plos One}, volume = {4}, year = {2009}, month = {NOV}, pages = {Article Number: e7718}, abstract = {Background: Coronary bypass graft failure as a result of acute thrombosis and intimal hyperplasia has been the major challenge in surgical procedures involving small-diameter vascular prosthesis. Coating synthetic grafts with patients{\textquoteright} own endothelial cells has been suggested to improve the patency rate and overall success of bypass surgeries. Methodology/Principal Findings: We isolated endothelial progenitor cells (EPCs) from leftover pieces of human saphenous vein/mammary artery. We demonstrate that EPCs can be expanded to generate millions of cells under low-density culture conditions. Exposure to high-density conditions induces differentiation to endothelial cell phenotype. EPC-derived endothelial cells show expression of CD144(high), CD31, and vWF. We then assessed the ability of differentiated endothelial cells to adhere and grow on small diameter expanded polytetrafluoroethylene (ePTFE) tubings. Since ePTFE tubings are highly hydrophobic, we optimized protocols to introduce hydrophilic groups on luminal surface of ePTFE tubings. We demonstrate here a stepwise protocol that involves introduction of hydrophilic moieties and coating with defined ECM components that support adhesion of endothelial cells, but not of blood platelets. Conclusion/Significance: Our data confirms that endothelial progenitors obtained from adult human blood vessels can be expanded in vitro under xenoprotein-free conditions, for potential use in endothelialization of small diameter ePTFE grafts. These endothelialized grafts may represent a promising treatment strategy for improving the clinical outcome of small-caliber vascular grafts in cardiac bypass surgeries.}, doi = {10.1371/journal.pone.0007718}, author = {Ranjan, Amaresh K. and Kumar, Umesh and Hardikar, Ashutosh A. and Poddar, Pankaj and Nair, Prabha D. and Hardikar, Anandwardhan A.} } @article { ISI:000267159700033, title = {Investigations on Ru doped ZnO: strain calculations and gas sensing study}, journal = {Sensors and Actuators B-Chemical}, volume = {139}, number = {2}, year = {2009}, month = {JUN}, pages = {466-470}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Pure and ruthenium (Ru) doped nano-crystalline zinc oxide (ZnO) powders were synthesized by using well-known citrate gel route. Citric acid acts as a chelating agent and thus helps in the formation of nanoparticles. The detailed X-ray diffraction (XRD) studies using Hall equation reveal that in the nanoscale dimensions, incorporation of Ru modulates the lattice strain. It is interesting to note that on Ru doping, the compressive strain present in the undoped ZnO changes into tensile strain. We have tested the response of these specimens individually for reducing gases like H(2), LPG (liquefied petroleum gas), C(2)H(5)OH (ethanol), CO, acetone and oxidizing gases like NO, and Cl(2). Undoped ZnO responses perceptibly to LPG while Ru doped sample highly senses ethanol vapors. This might be due to either change in composition on Ru doping or/and difference between basicity of LPG and C(2)H(5)OH vapors. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Citrate gel, Ethanol sensor, LPG sensor, Nanomaterials, ruthenium}, issn = {0925-4005}, doi = {10.1016/j.snb.2009.03.068}, author = {Navale, Shalaka C. and Ravi, V. and Mulla, Imtiaz S.} } @article { ISI:000262582400008, title = {Kinetic evidence for the influence of subsurface oxygen on palladium surfaces towards CO oxidation at high temperatures}, journal = {Chemistry-an Asian Journal}, volume = {4}, number = {1}, year = {2009}, month = {OCT}, pages = {74-80}, publisher = {WILEY-V C H VERLAG GMBH}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Transient state kinetics of the catalytic oxidation of CO with 0, on Pd-surfaces has been measured under isothermal conditions by using a molecular beam approach. Systematic studies were carried out as a function of reaction temperature and CO+O(2) composition. With sufficient kinetic evidence, we have demonstrated the positive influence of subsurface oxygen towards CO-adsorption and oxidation to CO, at high temperatures (600-900 K) on Pd-surfaces, and the likely electronic nature of the surface changes with oxygen in the subsurface. These studies also provide a direct proof for CO-adsorption with a significantly reactive sticking coefficient at high temperatures on Pd-surfaces exhibiting a significant subsurface O-coverage.

}, keywords = {Adsorption, kinetics, Oxidation, Palladium, surface analysis}, issn = {1861-4728}, doi = {10.1002/asia.200800278}, author = {Gopinath, Chinnakonda S. and Thirunavukkarasu, Kandasamy and Nagarajan, Sankaranarayanan} } @article { ISI:000265398300016, title = {Media optimization for biosurfactant production by rhodococcus erythropolis MTCC 2794: artificial intelligence versus a statistical approach}, journal = {Journal of Industrial Microbiology \& Biotechnology}, volume = {36}, number = {5}, year = {2009}, month = {MAY}, pages = {747-756}, publisher = {SPRINGER HEIDELBERG}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

This paper entails a comprehensive study on production of a biosurfactant from Rhodococcus erythropolis MTCC 2794. Two optimization techniques-(1) artificial neural network (ANN) coupled with genetic algorithm (GA) and (2) response surface methodology (RSM)-were used for media optimization in order to enhance the biosurfactant yield by Rhodococcus erythropolis MTCC 2794. ANN and RSM models were developed, incorporating the quantity of four medium components (sucrose, yeast extract, meat peptone, and toluene) as independent input variables and biosurfactant yield [calculated in terms of percent emulsification index (\% EI24)] as output variable. ANN-GA and RSM were compared for their predictive and generalization ability using a separate data set of 16 experiments, for which the average quadratic errors were similar to 3 and similar to 6\%, respectively. ANN-GA was found to be more accurate and consistent in predicting optimized conditions and maximum yield than RSM. For the ANN-GA model, the values of correlation coefficient and average quadratic error were similar to 0.99 and similar to 3\%, respectively. It was also shown that ANN-based models could be used accurately for sensitivity analysis. ANN-GA-optimized media gave about a 3.5-fold enhancement in biosurfactant yield.

}, keywords = {Artificial neural network, Biosurfactant, Genetic algorithm, Media optimization, Response surface methodology, Rhodococcus}, issn = {1367-5435}, doi = {10.1007/s10295-009-0547-6}, author = {Pal, Moumita P. and Vaidya, Bhalchandra K. and Desai, Kiran M. and Joshi, Renuka M. and Nene, Sanjay N. and Kulkarni, Bhaskar D.} } @article { ISI:000271819300006, title = {Natural yeast flora of different varieties of grapes used for wine making in India}, journal = {Food Microbiology}, volume = {26}, number = {8}, year = {2009}, month = {DEC}, pages = {801-808}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

The natural Saccharomyces and non-Saccharomyces yeast flora present on the grape berries significantly affect wine production. Six grape varieties, Bangalore blue, Zinfandel, Cabernet, Chenin Blanc, Sauvignon Blanc and Shiraz are being used in India for wine making. The yeast diversity was studied on the basis of morphological, colony, physiological characteristics and 5.8S-ITS sequencing of rDNA of the isolates. Eleven different species belonging to seven genera were identified as: Candida azyma, Candida quercitrusa, Debaryomyces hansenii, Hanseniaspora guilliermondii, Hanseniaspora viniae, Hanseniaspora uvarum. Issatchenkia orientalis, Issatchenkia terricola, Pichia membranifaciens, Saccharomyces cerevisiae and Zygoascus steatolyticus. H. guilliermondii was the predominant species while S. cerevisiae was observed occasionally in the six vine varieties. For the first time, C. azyma was isolated from Bangalore blue and Cabernet varieties grown in different localities. This association may be attributed to the change in cropping pattern from sugarcane to viticulture in the vine growing regions and the known association of C. azyma with sugarcane phylloplane. Further analysis of the indigenous strains and the qualitative and quantitative changes in the flora during fermentation will be useful to understand wine quality and to design preservation strategies to control wine spoilage. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {5.8S-ITS sequence, Identification, Physiological, Wine yeasts}, issn = {0740-0020}, doi = {10.1016/j.fm.2009.05.005}, author = {Chavan, Pradnya and Mane, Sarika and Kulkarni, Girish and Shaikh, Shamim and Ghormade, Vandana and Nerkar, Devidas P. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000266447600055, title = {Nitric oxide reduction with ethanol on palladium surfaces: a molecular beam study}, journal = {Journal of Physical Chemistry C}, volume = {113}, number = {22}, year = {2009}, month = {JUN}, pages = {9814-9819}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nitric oxide (NO) reduction with ethanol has been carried out with molecular beam instruments in order to understand the influence of ethanol blended gasoline on NO reduction. Maximum NO reduction and nitrogen production was observed between 500 and 600 K. Oxidation products, CO, CO(2), and H(2)O were also observed. Beam switching experiments have been performed between fuel-rich and fuel-lean compositions to demonstrate that the NO reduction can be managed under net oxidizing conditions on Pd surfaces. Nitrogen production only occurs transiently on the relatively clean Pd surface in the oxygen-rich condition due to slow build up and blockage of the reaction by surface oxygen atoms. This shows the need to maintain relatively oxygen free surfaces to manage NO reduction under net-oxidizing conditions by beam oscillation between fuel-rich and fuel-lean compositions.

}, issn = {1932-7447}, doi = {10.1021/jp902017c}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S. and Counsell, Jonathan and Gilbert, Lee and Bowker, Michael} } @article { ISI:000272010100009, title = {Optical investigations of interaction between zinc tetra phenyl porphyrin and CdSe nanoparticles}, journal = {Chemical Physics Letters}, volume = {483}, number = {4-6}, year = {2009}, month = {DEC}, pages = {227-232}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Interactions between nanoparticles of zinc tetra phenyl porphyrin (ZnTPP) with CdSe nanoparticles in dimethyl sulphoxide solvent have been investigated. A ZnTPP-CdSe complex was formed which showed substantial changes in the UV-Vis absorption spectra in the presence of CdSe. Fluorescence measurements showed an interesting behavior at low as well as high concentrations of CdSe. When low concentrations of CdSe nanoparticles were added to the ZnTPP nanoparticles solution, besides two fluorescence bands due to ZnTPP nanoparticles, an intense new band appeared. On the other hand at high concentrations of CdSe one of the fluorescence band of ZnTPP at similar to 604 nm increased. (C) 2009 Published by Elsevier B. V.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2009.10.074}, author = {Lihitkar, N. B. and Singh, S. B. and Singh, Jai and Srivastava, O. N. and Naik, R. H. and Kulkarni, S. K.} } @article { ISI:000269139900042, title = {Photoluminescence and gas sensing study of nanostructured pure and Sn doped ZnO}, journal = {Materials Science \& Engineering C-Biomimetic and Supramolecular Systems}, volume = {29}, number = {4}, year = {2009}, month = {MAY}, pages = {1317-1320}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The nanostructured pure and Sn doped ZnO have been synthesized by the thermal evaporation technique. The influence of Sri oil the morphology and structure is investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis techniques, The SEM images indicate change in the growth pattern from nanowires of pure ZnO to tetrapods for Sn doped ZnO. Pure ZnO nanowires exhibit selective response towards acetone vapors while on Sri doping the response decreases. The non-stiochiometry and the morphology of ZnO arc probably responsible for such a difference in gas response. However increase in temperature doesn{\textquoteright}t improve the sensing behavior. The photoluminescence (PL) Studies reveal UV emission in pure ZnO which shifts to green emission oil doping of Sri. All rights reserved. (C) 2008 Elsevier B V. All rights reserved.

}, keywords = {Acetone, Gas sensors, Sn doped ZnO}, issn = {0928-4931}, doi = {10.1016/j.msec.2008.09.050}, author = {Navale, Shalaka C. and Mulla, Imtiaz S.} } @article { ISI:000269287200036, title = {Polymer crystallization in the presence of {\textquoteleft}{\textquoteleft}sticky{\textquoteright}{\textquoteright} additives}, journal = {Journal of Chemical Physics}, volume = {131}, number = {7}, year = {2009}, month = {AUG}, pages = {074905}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The effect of {\textquoteleft}{\textquoteleft}sticky{\textquoteright}{\textquoteright} additives (viz., those that have attractive interactions with the polymer) on polymer crystallization, has been investigated by dynamic Monte Carlo (DMC) simulations. Additive-polymer attractive interactions result in a slowing down of the polymer chain diffusivity in the melt state. Our results show that with increasing additive stickiness, polymer crystallinity decreases monotonically, and thinner crystallites form, viz., crystallization is inhibited by the presence of sticky additives. Unusually, the observed {\textquoteleft}{\textquoteleft}specific heat{\textquoteright}{\textquoteright} peak at the phase transition shows nonmonotonic behavior with additive stickiness, and exhibits a maximum for intermediate values of additive stickiness. While the origins of this unexpected behavior are not clear, we show that it correlates with a large interchange between crystalline and amorphous states of the monomers, in the vicinity of the additives. At this intermediate additive stickiness, we also find that crystallization follows a qualitatively different route-crystallinity shows a non-Avrami-like evolution, unlike the case at low or high additive stickiness.

}, keywords = {Additives, amorphous state, crystallisation, crystallites, Diffusion, Monte Carlo methods, polymer melts}, issn = {0021-9606}, doi = {10.1063/1.3174449}, author = {Dasmahapatra, Ashok Kumar and Nanavati, Hemant and Kumaraswamy, Guruswamy} } @article { ISI:000271103500037, title = {Quantitative structure-property relationship (QSPR) prediction of liquid viscosities of pure organic compounds employing random forest regression}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {21}, year = {2009}, month = {NOV}, pages = {9708-9712}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A quantitative structure-property relationship (QSPR) approach was used to develop a predictive model for viscosities of pure organic liquids using a set of 403 compounds that belong to diverse classes of organic chemicals. A pool of 116 descriptors that encode topostructural, topochemical, electrotopological, geometrical, and quantum chemical properties of the organic compounds was used to develop QSPR models, based on the robust Random Forest (RF) regression algorithm. The performance of the algorithm, in terms of correlation coefficients and mean square errors, was determined to be good. The capability of the algorithm to build models and select the most-informative features simultaneously is very useful for several quantitative structure-activity/property relationship tasks. The eight most-dominant features selected by the RF regression algorithm primarily contained predictors that encode characteristics of atoms and groups that form hydrogen bonds, as well as factors involving molecular shape and size.

}, issn = {0888-5885}, doi = {10.1021/ie8018406}, author = {Rajappan, Remya and Shingade, Prashant D. and Natarajan, Ramanathan and Jayaraman, Valadi K.} } @article {42455, title = {Reactions of morita-baylis-hillman acetates with huisgen zwitterions: a novel strategy for the synthesis of ?-amino acid derivatives}, journal = {Synthesis}, year = {2009}, month = {APR}, pages = {1829{\textendash}1833}, abstract = {

The reaction of Huisgen Zwitterion with Morita{\textendash}Baylis{\textendash} Hillman acetates afforded b-amino acid derivatives.

}, keywords = {b-amino acid, Huisgen zwitterion, Morita{\textendash}Baylis{\textendash}Hillman acetate}, doi = {10.1055/s-0028-1088063}, author = {Jose, Anu and Paul, Rony Rajan and Mohan, Resmi and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh and Nair, Vijay} } @article { ISI:000265529700071, title = {Revisit to carbon monoxide oxidation on Pd(111) surfaces}, journal = {Journal of Physical Chemistry C}, volume = {113}, number = {17}, year = {2009}, month = {APR}, pages = {7385-7397}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Carbon monoxide (CO) oxidation on Pd(111) surfaces has been studied by molecular beam methods with mixed molecular beams (CO + O(2)) between 400 and 900 K and a CO:O(2) ratio of 7:1 to 1:10. A new aspect of the above reaction observed in the transient kinetics regime is the evidence for oxygen diffusion into Pd(111) subsurface layers and its significant influence toward CO oxidation at high temperatures (\>= 600 K). An overall influence of subsurface oxygen on the kinetics of the CO oxidation reaction is addressed. Interesting information derived from the above studies is the necessity to fill up the subsurface layers with oxygen atoms to a threshold coverage (theta(Osub)), above which the reactive CO adsorption occurs on the surface with subsequent CO(2) production. The above observation Was demonstrated with CO-rich reactant compositions (CO + O(2)) above 600 K via instant oxygen adsorption on Pd surfaces; however, onset of CO adsorption as well as CO(2) production occurs after a time delay. theta(Osub) and the time delay in CO adsorption (and CO(2) production) increase with increasing temperature and with CO-rich compositions. theta(Osub) was measured up to 0.3 monlayer (ML) between 500 and 850 K before the onset of CO adsorption; however, theta(Osub) increases from an insignificant value at \<500 K to 0.4 ML at 900 K with a pure O(2) beam. Onset of CO adsorption with a significant sticking coefficient on the Pd surfaces, that is, covered with significant subsurface oxygen, underscores a change in the electronic state of Pd surfaces toward mildly oxidized (or Pd(delta+)), and an electronic decoupling occurs between the bulk and the surface. The jellium model is invoked to demonstrate the changes observed. A similar observation with polycrystalline Pd surfaces suggests the defect sites is one of the channels for oxygen diffusion into subsurfaces. Initial sticking coefficient (s(0)) measurements demonstrate that there is no significant competition between CO and O(2) adsorption from the CO + O(2) mixture between 400 and 600 K, and indeed they are largely independent of each other. The maximum steady-state CO(2) formation rate was observed for a 1:1 CO/O(2) beam composition between 500 and 550 K. However, with a significant theta(Osub) the rate of CO(2) Production in the steady state is considerable even at high temperatures (700-850 K), and a broadening of the active CO oxidation regime to high temperature is observed with O(2)-rich compositions.

}, issn = {1932-7447}, doi = {10.1021/jp900890w}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S.} } @article { ISI:000266185600012, title = {Selective N-alkylation of aniline with methanol over a heteropolyacid on montmorillonite K10}, journal = {Applied Clay Science}, volume = {44}, number = {3-4}, year = {2009}, month = {MAY}, pages = {255-258}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

N-methylaniline is an industrially important product in the manufacture of paper, textile dyes, drugs, perfumes and explosives. The vapour phase alkylation of aniline with methanol forming N-methylaniline is advantageous over liquid phase alkylation. In present study, vapour phase methylation of aniline over dodecatungestophosphoric acid supported on K10 montmorillonite was systematically studied and optimization of process parameters was carried out. The 20\% m/m DTPA/K10 was found to be optimum with 79\% aniline conversion and 99\% N-methylaniline selectivity. The reaction required milder operating conditions than reported for commercial catalysts. We also studied the feasibility of 20\% m/m DTPA/K10 as a catalyst for the alkylation of aniline with other alcohols like ethanol, n-propanol, iso-propanol and n-butanol. The activity of 20\% m/m DTPA/K10 decreased with increasing carbon number. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Alkylation, Aniline, Heteropolyacid, montmorillonite K10, N-methylaniline}, issn = {0169-1317}, doi = {10.1016/j.clay.2009.02.011}, author = {Nehate, Manoj and Bokade, Vijay V.} } @article { ISI:000269185000035, title = {Sensitivity enhancement of Si-29 double-quantum dipolar recoupling spectroscopy by Carr-Purcell-Meiboom-Gill acquisition method}, journal = {Chemical Physics Letters}, volume = {478}, number = {4-6}, year = {2009}, month = {AUG}, pages = {287-291}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

An enhancement in the detection sensitivity of dipolar recoupled Si-29 double-quantum magic-angle spinning experiment is shown with a Carr-Purcell-Meiboom-Gill (CPMG) train of pi pulses during the acquisition period. Symmetry-adapted pulse schemes, such as POST-C7 and SR26(4)(11), are used for the double-quantum excitation. Application of POST-C7-CPMG method for framework characterisation is demonstrated in the disordered and catalytically important ZSM-5 molecular sieve. Based on the observed double-quantum dipole-dipole correlations and the known T-site Si connectivities, the assignment of all the signals is made for the orthorhombic phase of the as-synthesised (CN form) material. (C) 2009 Elsevier B. V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2009.07.066}, author = {Goswami, M. and Madhu, Perunthiruthy K. and Dittmer, J. and Nielsen, N. C. and Ganapathy, Subramanian} } @article { ISI:000268726500015, title = {Simple and efficient enzymatic transglycosylation of stevioside by beta-cyclodextrin glucanotransferase from Bacillus firmus}, journal = {Biotechnology Letters}, volume = {31}, number = {9}, year = {2009}, note = {13th International Biotechnology Symposium and Exhibition (IBS-2008), Dalian, PEOPLES R CHINA, OCT 12-17, 2008}, month = {SEP}, pages = {1415-1420}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Stevioside was subjected to 1,4-intermolecular transglycosylation using beta-cyclodextrin glucanotransferase (beta-CGtase) produced from an alkalophilic strain of Bacillus firmus. The reaction was carried out by traditional, ultrasound-assisted and microwave-assisted techniques. Reaction under microwave conditions was faster and was completed in 1 min yielding two 1,4 transglycosylated products, 4{\textquoteright}-O-alpha-d-glycosyl stevioside (I) and 4{\textquoteright}{\textquoteright}-O-alpha-d-maltosyl stevioside (II) in 66\% and 24\%, respectively. The optimum transglycosylation occurred by using stevioside (1.24 mmol), beta-CD (1.76 mmol) and beta-CGtase (2 U/g) under microwave assisted reaction (MAR) in 5 ml sodium phosphate buffer (pH 7) at 50A degrees C and 80 W power. MAR is therefore potentially a useful and economical method for faster transglycosylation of stevioside.

}, keywords = {beta-cyclodextrin, beta-Cyclodextrin glucanotransferase, Microwave-assisted reaction, Stevia rebaudiana, Stevioside, Transglycosylation}, issn = {0141-5492}, doi = {10.1007/s10529-009-0020-7}, author = {Jaitak, V. and Kaul, V. Kumar and Bandna and Kumar, N. and Singh, B. and Savergave, L. S. and Jogdand, Vitthal V. and Nene, S.} } @article { ISI:000269197400020, title = {Some mechanistic insights into the gelation of regenerated silk fibroin sol}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {17}, year = {2009}, month = {SEP}, pages = {8014-8023}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We provide some new insights into the kinetics and mechanism of sol-gel transition as it pertains to regenerated silk fibroin, which is the principle structural protein of silkworm silk fiber. Silk fibroin was dissolved in lithium bromide and dialyzed against deionized water to prepare a regenerated fibroin solution. This solution was found to be unstable at lower pH and transformed into a colloidal gel. The kinetics and mechanism of the sol-gel transition were investigated using rheology and light scattering. We show that gelation proceeds in two steps. In the first step, a weak gel is formed almost immediately upon lowering the pH, while in the second step further gelation proceeds rapidly after a long induction time to form a self-similar structure.

}, issn = {0888-5885}, doi = {10.1021/ie801723f}, author = {Nagarkar, Shailesh and Patil, Avinash and Lele, Ashish K. and Bhat, Suresh K. and Bellare, Jayesh R. and Mashelkar, Raghunath Anant} } @article {43243, title = {Study of cumulant approximations to n-electron valence multireference perturbation theory}, journal = {Journal of Chemical Physics}, volume = {130}, year = {2009}, month = {MAY}, pages = {Article Number: 194107}, abstract = {We investigate the possibility of reducing the complexity of multireference perturbation theory through cumulant based approximations to the high-order density matrices that appear in such theories. Our test cases show that while the cumulant approximated forms are degraded in accuracy relative to the parent theory and exhibit intruder state problems that must be carefully handled, they may provide a route to a simple estimation of dynamic correlation when the parent perturbation theory is infeasible. Nonetheless, further work is clearly needed on better approximations to the denominators in the perturbation theory.}, doi = {10.1063/1.3132922}, author = {Zgid, Dominika and Ghosh, Debashree and Neuscamman, Eric and Chan, Garnet Kin-Lic} } @article { ISI:000272522300034, title = {Synthesis and properties of new polybenzoxazines containing (substituted) cyclohexyl moieties}, journal = {Polymers for Advanced Technologies}, volume = {20}, number = {12}, year = {2009}, month = {DEC}, pages = {1107-1113}, publisher = {JOHN WILEY \& SONS LTD}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

A series of new polybenzoxazines were synthesized based on diphenols containing (substituted) cyclohexyl moiety and were characterized by FT-IR, (1)H-NMR, and (13)C-NMR spectroscopy. These new benzoxazine monomers exhibited better processability with lower peak cure temperature and a wide cure controllable window (CCW) as manifested in differential scanning calorimetric analysis. The cure analysis was performed by FT-IR spectroscopy. Glass transition temperature of new polybenzoxazines varied from 170 to 205 degrees C. The cyclohexyl bridge groups facilitated ring opening, resulting in polymer with improved thermal stability in comparison to bisphenol A-based benzoxazine as assessed by the various thermal analyses. The water contact angles of polybenzoxazines containing (substituted) cyclohexyl moieties were higher than that of bisphenol A-based polybenzoxazine, implying their higher hydrophobicity. Copyright (C) 2009 John Wiley \& Sons, Ltd.

}, keywords = {Hydrophobicity, polybenzoxazines, thermally stable polymers}, issn = {1042-7147}, doi = {10.1002/pat.1370}, author = {Kumar, K. S. Santhosh and Nair, C. P. Reghunadhan and Ninan, K. N. and Kulkarni, A. D. and Wadgaonkar, P. P.} } @article { ISI:000271443200024, title = {Synthesis of N-methylaniline by aniline alkylation with methanol over Sn-MFI molecular sieve}, journal = {Catalysis Letters}, volume = {133}, number = {1-2}, year = {2009}, month = {NOV}, pages = {175-184}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Sn-MFI molecular sieves (Tin silicalite-1) with SiO(2)/SnO(2) molar ratio of 50-150 were synthesized and characterized. Elemental analysis, XRD and DRUV-vis confirmed that prepared samples were of MFI zeolite structure and Sn was incorporated in MFI framework. Vapor phase methylation of aniline over Sn-MFI was systematically studied and optimizations of process parameters were carried out. Sn-MFI (SiO(2)/SnO(2) = 50) was found to be optimum catalyst with 55\% aniline conversion and 60\% N-methylaniline selectivity. At lower space velocity (higher contact time) of 1 h(-1), aniline conversion was found to be increased to 71\% with reduction in N-methylaniline selectivity to 39\% and increased in N,N-dimethylaniline selectivity to 58\%. The reaction follows first order kinetics with respect to aniline having activation energy of 7.3 kcal/mol.

}, keywords = {Aniline, Lewis acid, Methanol, N-methylaniline, Sn-MFI}, issn = {1011-372X}, doi = {10.1007/s10562-009-0143-4}, author = {Niphadkar, P. S. and Joshi, P. N. and Gurav, H. R. and Deshpande, Suvarna S. and Bokade, Vijay V.} } @article { ISI:000267367300016, title = {Synthesis of Si-MCM-41 from ternary SiO2-CTAOH-H2O system via dry gel conversion route}, journal = {Journal of Sol-Gel Science and Technology}, volume = {51}, number = {2}, year = {2009}, month = {AUG}, pages = {244-250}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Steam assisted dry gel conversion method was employed for the synthesis of Si-MCM-41 from ternary SiO2:CTAOH:H2O systems wherein fumed silica was used as a source of silica. The influence of synthesis time, molar ratios of CTAOH/SiO2 in dry gel and the water content at the bottom of autoclave on the quality and formation of mesophases has been investigated. Powder XRD, N-2 adsorption-desorption, TEM and hydrothermal stability test were the techniques used for sample characterization. Keeping molar ratio of CTAOH/SiO2 constant, shorter synthesis time, lower unit cell parameter and d spacing were observed when steam assisted dry gel conversion method was employed in place of conventional hydrothermal method. There exists an optimum lower limit for water content at the bottom of autoclave for reducing the synthesis period. Keeping synthesis temperature and CTAOH/SiO2 molar ratio fixed, Si-MCM-41 with improved hydrothermal stability was obtained by steam assisted dry gel conversion route.

}, keywords = {Dry gel conversion, powder diffraction, Si-MCM-41, Sol-gel growth, Structural stability, Textural properties}, issn = {0928-0707}, doi = {10.1007/s10971-009-1969-3}, author = {Taralkar, U. S. and Niphadkar, P. S. and Joshi, P. N.} } @article { ISI:000263249600064, title = {Tin-silicalite-1: synthesis by dry gel conversion, characterization and catalytic performance in phenol hydroxylation reaction}, journal = {Materials Chemistry and Physics}, volume = {114}, number = {1}, year = {2009}, month = {MAR}, pages = {344-349}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Tin-silicalite-1 (Sn-MFI) has been successfully synthesized by dry gel conversion (DGC) method. The influence of various synthesis parameters such as crystallization time, temperature, water content at the bottom of autoclave, molar ratios of (TPA)(2)O/SiO(2) and SiO(2)/SnO(2) in dry gel on the crystallization kinetics and physico-chemical properties of Sn-MFI materials has been investigated. Powder-X-ray diffraction (XRD),XPS,AAS, DRUV-vis and SEM techniques were employed as characterization tools. Time-dependent studies revealed that, the progressive crystallization of Sn-MFI depend not only on the synthesis time but also on the other various synthesis parameters. Increase in the crystallization temperature, water content at bottom of autoclave (TPA)(2)O/SiO(2) and SiO(2)/SnO(2) molar ratios in dry gel resulted in the lowering of overall crystallization period. A good correspondence between the chemical composition of the surface and the bulk indicated the uniform distribution of Sn(4+) ions. The presence of these ions in tetrahedral coordination has been indicated by DRUV-vis spectral studies. Although, not better but comparable activity has been shown by Sn-MFI prepared by dry gel conversion method with Sn-MFI prepared by conventional hydrothermal crystallization method in the hydroxylation of phenol reaction. Increase in concentration of isolated Sn(4+) ions led to increase in phenol conversion and H(2)O(2) efficiency. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {crystallisation, Dry gel conversion, microporous materials, Sn-MFI}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2008.09.026}, author = {Niphadkar, Prashant S. and Kotwal, Mehejabeen S. and Deshpande, Shilpa S. and Bokade, Vijay V. and Joshi, Praphulla N.} } @article { ISI:000267531100032, title = {Transesterification of sunflower oil catalyzed by flyash-based solid catalysts}, journal = {Fuel}, volume = {88}, number = {9}, year = {2009}, month = {SEP}, pages = {1773-1778}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Flyash-based base catalyst was used in the transesterification of sunflower oil with methanol to methyl esters in a heterogeneous manner. Catalyst preparation variables such as, the KNO(3) loading amount and calcination temperature were optimized. The catalysts were characterized by powder XRD. The catalyst prepared by loading of 5 wt.\% KNO(3) on flyash followed by its calcination at 773 K has exhibited maximum oil conversion (87.5 wt.\%). The influence of various reaction parameters such as \% catalyst loading, methanol to oil molar ratio, reaction time, temperature, reusability of the catalyst on the catalytic activity was investigated. K(2)O derived from KNO(3) might be an essential component in the catalyst for its efficiency. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Flyash, heterogeneous catalyst, Methyl ester, Sunflower oil, transesterification}, issn = {0016-2361}, doi = {10.1016/j.fuel.2009.04.004}, author = {Kotwal, M. S. and Niphadkar, P. S. and Deshpande, Suvarna S. and Bokade, Vijay V. and Joshi, P. N.} } @article {42800, title = {Transfer of technology (ToT) document of polyimide binder resins}, year = {2009}, month = {JAN}, author = {Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Dwivedi, Mayank and Chavan. N. N. and Qureshi, Moham and Bhongale, Sunil Sitaram and Rao, Locanindi Hari Sarvothama and Dhansekharan, Janakiraman and Mohan, S. Krishna and Deokar, Sarika Babasaheb and Momin, Mohasin Shamshuddin} } @article { ISI:000263399700004, title = {Utilization of sugarcane bagasse cellulose for producing cellulose acetates: novel use of residual hemicellulose as plasticizer}, journal = {Carbohydrate Polymers}, volume = {76}, number = {1}, year = {2009}, month = {MAR}, pages = {23-29}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Sugarcane bagasse was fractionated to cellulose, hemicellulose and lignin by a proprietary steam explosion process, followed by downstream purifications, developed in our laboratory. The fractionated cellulose contained similar to 94\% cellulose, about similar to 5\% hemicellulose, traces of lignin (similar to 0.2\%), and similar to 1\% ash. The cellulose was acetylated under heterogeneous conditions to obtain cellulose acetates. These were extensively characterized using FTIR, TGA, DSC, GPC, HPIC, WAXRD, and viscometry. The novel feature of this study was the utilization of the hemicellulose content (5\%) of bagasse cellulose as an internal plasticizer. Through kinetic experimentation, we have demonstrated that the residual hemicellulose need not be considered as an impurity; rather it can be used in acetylated form as a plasticizer as well as a biodegradable additive for cellulose acetates made from slightly impure cellulose produced from non-wood origin. Our results therefore show how lignocellulosic agricultural wastes can be utilized to produce high value plastics. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Bagasse cellulose, Cellulose acetate, Hemicellulose, Plasticizer, Sugarcane bagasse, Xylan acetate}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2008.09.014}, author = {Shaikh, Hamid M. and Pandare, Kiran V. and Nair, Greeshma and Varma, Anjanikumar} } @article { ISI:000263021000003, title = {Vinyl-2-pyrrolidone derivatized guar gum based aqueous two-phase system}, journal = {Separation and Purification Technology}, volume = {65}, number = {1, SI}, year = {2009}, month = {FEB}, pages = {9-13}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Aqueous two-phase systems (ATPs) are formed when certain combinations of two polymers or polymer and salt are added to water. Phase separation occurs at certain specific concentrations that have similar densities and low interfacial tensions. The present study involves synthesis and application of a novel derivatized guar in aqueous two-phase system. The derivation of guar gum was performed by grafting of 1-vinyl-2-pyrrolidone by a redox reaction in aqueous medium ceric ammonium nitrate (CAN) and potassium Peroxydisulfate(K2S2O8). The ratio of grafting efficiency (\%GE) and ratio of grafting (\%G) was 56\% and 70.1\% respectively. The grafted copolymers were characterized for percent yield and FTIR absorbance. A new aqueous two-phase extraction protocol was established using a mixture of derivatized guar and dextran. A phase diagram was constructed based on the phase separation exhibited by the system at 25 degrees C. The partition coefficient was determined for standard bovine serum albumin (BSA), lactate oxidase (LO) and phytase. The partitioning coefficients were 0.479, 1.981, and 2.586 respectively in the Dextran (2 mill ion)/V-GG/H2O system. The influence of an ionic salt sodium chloride (NaCl) was investigated on the partitioning of BSA. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Aqueous two phase, graft copolymers, Guar gum, Partition coefficient (K), Phase diagram, Vinyl pyrrolidone, viscosity}, issn = {1383-5866}, doi = {10.1016/j.seppur.2008.03.020}, author = {Kautharapu, Kumar and Pujari, Narahari S. and Golegaonkar, Sandeep B. and Ponrathnam, Surendra and Nene, Sanjay N. and Bhatnagar, D.} } @article {42793, title = {Amino functionalized oligoimides telechelics}, number = {2922/DEL/2010 A}, year = {2010}, month = {AUG}, type = {India Patents}, abstract = {

This invention relates to a process for the preparation of amino functionalized oligoimide telechelics. More particularly it relates to a process for the preparation of soluble oligoimide prepolymers which can be used as matrix resins that can be rapidly cured to form stable polyimides with amino end functionalities. The amino functionalized oligoimide telechelics are suitable for conversion into three dimensional polymeric systems through condensation chemistry such as reaction with oligo epoxies (epoxy-imide resins), polyacids (polyamide imides) and polyhalogenated compounds (poly amine - imides) to form crosslinked structures having enhanced thermal stability and mechanical strength. The polymers prepared by the process of this invention can be used as materials in advanced composites having high temperature stability.

}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Reddy, Krishna Mohan Srinivasulu and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Rajan, Chelanattukizhakkemadath Raman and Deokar, Sarika Babasaheb and Mulani, Khudbudin Baban and Ghorpade, Ravindra V. and Bhongale, Sunil Sitaram and Nalawade, Archana Chetan and Sontakke, Kalpana Vishwanathrao and Shaikh, Wasif Abdul Lateef and Chavan, Nayaku and Qureshi, Mohammed Shadbar and Dhoble, Deepa Arun and Mule, Smita Atmaram and Bhosle, Sonali Madhavrao and Momin, Mohasin Shamshuddin} } @article {43380, title = {Application of nanotechnology for detection and decontamination of organophosphorus pesticides and warfare agents}, journal = {Nanotrends}, volume = {8}, year = {2010}, month = {JUN}, pages = {1-17}, author = {Nigam, Preeti} } @article { ISI:000275708600041, title = {Carbon dissolution and segregation in Pd(110)}, journal = {Journal of Physical Chemistry C}, volume = {114}, number = {11}, year = {2010}, month = {MAR}, pages = {5060-5067}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The bulk-surface diffusion of carbon in Pd(110) has been investigated using Molecular beams to examine the clean-off of carbon with gas-phase oxygen. The dominant product of the reaction above 600 K is CO CO, is only produced at much lower temperatures where the lifetime of adsorbed CO is significant. The segregation from the bulk Only Occurs at a measurable rate at \>750 K, while loss of carbon into the bulk call occur at much lower temperatures. The reaction of carbon at high temperatures shows two regimes: (i) a non steady-state evolution of CO due to the clean-off of surface carbon already present on the surface, followed by (ii) a near steady-state reaction due to the continuous diffusion of carbon to the surface.

}, issn = {1932-7447}, doi = {10.1021/jp9108046}, author = {Bowker, Michael and Counsell, Jonathan and El-Abiary, Kareem and Gilbert, Lee and Morgan, Chris and Nagarajan, Sankaranarayanan and Gopinath, Chinnakonda S.} } @conference { ISI:000279938400012, title = {Chemical shielding of closed-shell molecules using extended coupled-cluster theory}, booktitle = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives}, series = {Astrophysics and Space Science Proceedings}, year = {2010}, note = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives, Indian Inst Astrophys, Kodaikanal Observatory, Bangalore, INDIA, JAN 28-31, 2009}, month = {MAR}, pages = {111-121}, publisher = {Springer}, organization = {Springer}, address = {233 Spring Street, New York, NY 10013, United States}, abstract = {

In this paper we report calculation of the nuclear magnetic shielding constant using extended coupled cluster response approach. We present the results for the HF, BH, CO and N(2) molecules. These results show importance of correlation corrections for the shielding constant.

}, isbn = {978-3-642-10321-6}, issn = {1570-6591}, doi = {10.1007/978-3-642-10322-3_12}, author = {Ravichandran, Lalitha and Joshi, Sayali and Vaval, Nayana}, editor = {Chaudhuri, R. K. and Mekkaden, M. V. and Raveendran, A. V. and Narayanan, A. S.} } @article { ISI:000281868200016, title = {Cobalt nanoparticles doped emaraldine salt of polyaniline: a promising room temperature magnetic semiconductor}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {322}, number = {24}, year = {2010}, month = {DEC}, pages = {3926-3931}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Incorporation of magnetic nanoparticles in polymers with organic functional groups working as semiconducting substrate is of immense interest in the field of dilute magnetic semiconductors (DMS) and spintronics. In this article we report on synthesis and evaluation of dilutely doped (0-10 wt\%) cobalt nanoparticles in emaraldine salt (ES) of polyaniline in the presence of dodecyl benzene sulfonic acid (DBSA) and p-toluene sulfonic acid (p-TSA) using a sonochemical-assisted-reduction approach as a possible DMS candidate. The X-ray diffraction pattern and high resolution transmission electron microscopy (HRTEM) image show the ES to be polycrystalline, in which 10 nm sized Co nanoparticles get embedded in its FCC structural form. From Fourier transform infrared (FT-IR) and UV-visible (UV-vis) spectroscopy studies, it is predicted that cobalt particles get electrostatically bound to the specific SO(3)(-) ion sites of ES, thereby modifying torsional degrees of freedom of the system. The applied field dependent magnetization study shows that the sample exhibits hysteresis loop with a minimal doping of 3 wt\% of Co nanoparticles and increases with the amount of Co nanoparticles in ES due to dipolar interaction. The electron transport data show that with increase in Co wt\% there is a gradual shift from ohmic to non-ohmic response to the sample bias, accompanied by opening of electrical hysteresis and an increased resistance. The non-linear response of higher doped systems has been attributed to the combination of direct and Fowler-Nordheim tunneling phenomena in these systems. Persistence of optical and transport properties of the polymer, with an introduction of magnetic moment in the system, envisages the system to be a fine magnetic semiconductor. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Cobalt nanoparticles, Magnetic semiconductor, polyaniline}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2010.08.022}, author = {Hatamie, Shadie and Kulkarni, M. V. and Kulkarni, S. D. and Ningthoujam, R. S. and Vatsa, R. K. and Kale, Sangeeta N.} } @article { ISI:000283700200020, title = {Convenient approach to the synthesis of different types of schiff{\textquoteright}s bases and their metal complexes}, journal = {Chemistry Letters}, volume = {39}, number = {10}, year = {2010}, month = {OCT}, pages = {1078-1079}, publisher = {CHEMICAL SOC JAPAN}, address = {1-5 KANDA-SURUGADAI CHIYODA-KU, TOKYO, 101-8307, JAPAN}, abstract = {

Various metal complexes derived from different Schiff bases are conveniently prepared using solvent-free condensation reactions in one-pot synthesis, resulting in significantly enhanced yields Initial calorimetric studies, and/or TGA of reaction mixtures, led to better optimization of reaction conditions The ligands like mines, hydrazones, semicarbazones, and nitrones are also synthesized by this method, thus this process is general and expedient

}, issn = {0366-7022}, doi = {10.1246/cl.2010.1078}, author = {Pradhan, Kiran and Selvaraj, Kaliaperumal and Nanda, Ashis K.} } @article { ISI:000285311000016, title = {Enantio- and diastereocontrolled total synthesis of (+)-strictifolione}, journal = {European Journal of Organic Chemistry}, number = {36}, year = {2010}, month = {DEC}, pages = {6993-7004}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

A concise and practical enantioselective synthesis of (+)-strictifolione has been achieved in high diastereomeric excess using Jacobsen{\textquoteright}s hydrolytic kinetic resolution, proline-catalyzed sequential alpha-aminoxylation and Horner-Wadsworth-Emmons olefination of aldehyde and cross olefin/ring-closing metathesis as the key steps.

}, keywords = {Asymmetric synthesis, Hydrolytic kinetic resolution, lactones, Natural products, organocatalysis, Ring-closing metathesis, Total synthesis}, issn = {1434-193X}, doi = {10.1002/ejoc.201001221}, author = {Kumar, Pradeep and Pandey, Menaka and Gupta, Priti and Naidu, S. Vasudeva and Dhavale, Dilip D.} } @article { ISI:000283216900029, title = {Enhancement of anisotropic conductivity, elastic, and dielectric constants in a liquid crystal-gold nanorod system}, journal = {Applied Physics Letters}, volume = {97}, number = {15}, year = {2010}, month = {OCT}, pages = {151913}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

We report electrical conductivity (sigma), dielectric constant (epsilon) and the elastic constant measurements in a nematic liquid crystal (LC) doped with small concentrations of gold nanorods. This LC-nanoparticle complex, shows not only orders of magnitude higher sigma, but also stabilizes its anisotropy. The epsilon data suggests an increased ordering in the nematic phase, and an improved antiparallel correlation of the molecules in the isotropic phase. Surprisingly, an anisotropic enhancement of the Frank elasticity is also seen. We suggest a possible electro/magnetomechanical conductivity switch and also provide explanations based on the aspect ratio of the nanoparticles vis-a-vis the LC molecules. (c) 2010 American Institute of Physics. [doi:10.1063/1.3499744]

}, issn = {0003-6951}, doi = {10.1063/1.3499744}, author = {Sridevi, S. and Prasad, S. Krishna and Nair, Geetha G. and D{\textquoteright}Britto, Virginia and Bhagavatula L. V. Prasad} } @article { ISI:000280463000017, title = {Exfoliation of clay layers in polypropylene matrix using potassium succinate-g-polypropylene as compatibilizer}, journal = {Composites Science and Technology}, volume = {70}, number = {10}, year = {2010}, month = {SEP}, pages = {1550-1556}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The efficiency of potassium succinate-g-polypropylene (KPPSA) as compatibilizer for the dispersion of clay in a high molecular weight polypropylene during melt mixing for the preparation of nanocomposites was evaluated and compared with maleic anhydride-g-polypropylene (PPMA). Nanocomposites were prepared by direct melt mixing and by masterbatch methods and the structure obtained was characterized by WAXD and TEM. The exfoliation and better dispersion of the organoclay was observed with KPPSA than PPMA. The dispersion of clay was found to be dependent on the method of preparation, type and the amount of compatibilizer used. The dispersion was better when the nanocomposites were prepared by two step masterbatch route than the single step direct mixing method. Flexural moduli and crystallization behavior were studied and correlated with the dispersion of organoclay in the PP matrix. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {differential scanning calorimetry, Mechanical property, Nano composites, Nanoclays, polypropylene}, issn = {0266-3538}, doi = {10.1016/j.compscitech.2010.05.021}, author = {Rama, Mallikarjuna Shroff and Neppalli, Ramesh and Chellaswamy, Ramesh and Swaminathan, Sivaram} } @article { ISI:000286862600011, title = {Facile enantioselective synthesis of enantiomerically pure (R)-phenoxybenzamine hydrochloride using the hydrolytic kinetic resolution method}, journal = {Tetrahedron-Asymmetry}, volume = {21}, number = {23}, year = {2010}, month = {DEC}, pages = {2825-2829}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A practical and highly efficient enantioselective synthesis of (R)-phenoxybenzamine hydrochloride has been described for the first time using Jacobsen{\textquoteright}s hydrolytic kinetic resolution of a terminal epoxide as a key step and source of chirality. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2010.11.011}, author = {Nikalje, Milind D. and Sasikumar, Murugesan and Muthukrishnan, Murugan} } @article { ISI:000284018100044, title = {Facile synthesis of N- and S-incorporated nanocrystalline TiO2 and direct solar-light-driven photocatalytic activity}, journal = {Journal of Physical Chemistry C}, volume = {114}, number = {45}, year = {2010}, month = {NOV}, pages = {19473-19482}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Sulfur- and nitrogen-incorporated mesoporous TiO2 (SNT) nanocomposites have been synthesized by a template-free homogeneous coprecipitation technique. The above nanocomposites have been thoroughly characterized by physicochemical and spectroscopy methods to explore the structural, electronic, and optical properties. The photocatalytic activities of the catalysts were evaluated for the degradation of methyl orange and phenol under direct solar light. SNT shows about a 2-fold higher photocatalytic activity than singly N-doped or S-doped mesoporous TiO2 and 3-fold higher than Degussa P25. The higher activity might be attributed to the synergetic interaction of sulfate and nitrogen with the TiO2 lattice. N-Ti-O and O-Ti-N-O environments are responsible for a red shift, and the sulfate group on TiO2 acts as a cocatalyst, for increasing surface acidity as well as for sustaining the redox cycles for high stability.

}, issn = {1932-7447}, doi = {10.1021/jp1083345}, author = {Naik, Brundabana and Parida, K. M. and Gopinath, Chinnakonda S.} } @article { ISI:000275524800024, title = {Hydroxyalkylation of p-Cresol to 2,2 {\textquoteleft}-methylenebis(4-methylphenol) using Sn/Si-MCM-41 catalysts}, journal = {Chemistry Letters}, volume = {39}, number = {2}, year = {2010}, month = {FEB}, pages = {126-127}, publisher = {CHEMICAL SOC JAPAN}, address = {1-5 KANDA-SURUGADAI CHIYODA-KU, TOKYO, 101-8307, JAPAN}, abstract = {

Sn/Si-MCM-41 has exhibited an excellent catalytic activity [70\% product yield with 88\% selectivity to 2,2{\textquoteright}-methylenebis(4-methylphenol)] for the selective hydroxyalkylation of p-cresol. At equal level of Sn loading, Sn/Si-MCM-41 prepared by direct hydrothermal synthesis showed higher activity than Sn-impregnated Si-MCM-41 catalyst.

}, issn = {0366-7022}, doi = {10.1246/cl.2010.126}, author = {Garade, Ajit C. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Rode, Chandrashekhar V.} } @article { ISI:000283204900015, title = {Micro-/meso-porous stannosilicate composites (Sn-MFI/MCM-41) via two-step crystallization process: process parameter-phase relationship}, journal = {Microporous and Mesoporous Materials}, volume = {136}, number = {1-3}, year = {2010}, month = {DEC}, pages = {115-125}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Sn-MFI/MCM-41 composite material was successfully synthesized by monitoring the re-crystallization time in a simple two-step crystallization process. The length of period allowed for the recrystallization of the precursor species was found to be a controlling factor to achieve either the end members viz. Sn-MCM-41 and Sn-MFI or Sn-MFI/MCM-41 composite material. Powder XRD, FTIR, SEM, TEM, nitrogen sorption measurement, DRUV-vis and hydroxyalkylation of p-cresol reaction were used as the characterization tools. Attempts were also made to establish the relationship between type of phase formed and the process parameters such as aging time, re-crystallization temperature, time and molar ratios of TPAOH/SiO(2), CTMABr/SiO(2) and SiO(2)/SnO(2) in the gel. (C) 2010 Elsevier Inc. All rights reserved.

}, keywords = {composites, Crystallization, Micro-/meso-porous stannosilicate, p-Cresol hydroxyalkylation, Sn-MCM-41, Sn-MFI}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2010.08.005}, author = {Niphadkar, Prashant S. and Garade, Ajit C. and Jha, Ratnesh Kumar and Rode, Chandrashekhar V. and Joshi, Praphulla N.} } @article { ISI:000285236700003, title = {N-Type field effect transistors based on rigid rod and liquid crystalline alternating copoly(benzobisoxazole) imides containing perylene and/or naphthalene}, journal = {Journal of Physical Chemistry B}, volume = {114}, number = {50}, year = {2010}, month = {DEC}, pages = {16694-16704}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The synthesis, characterization, and device studies of poly(benzobisoxazole imide)s containing perylene or naphthalene units in an alternating fashion with the oxazole unit are described. Photoinduced energy transfer and charge separation were studied in methanesulfonic acid (MSA) solution via absorption, excitation, and steady-state fluorescence studies. Excitation of the bisoxazole moiety resulted in enhanced emission from the perylene bisimide unit as a result of FRET (Forster resonance energy transfer). The influence of the imide substitution into the linear chain of poly(benzobisoxazole) (PBO) on its solid-state packing was examined by wide-angle X-ray diffraction (WXRD) analysis. Bottom contact field effect transistors (FET) based on thermally annealed polymer films were fabricated and studied. The polymers showed n-type charge transport and current modulation with an on/off ratio greater than 10(2). It was observed that the FETs consisting of the random copolymer of bisoxazole containing both perylene as well as naphthalene bisimide units had higher performance parameters such as better mobility (mu e) and I(on)/I(off) ratio compared to those of the pristine systems.

}, issn = {1520-6106}, doi = {10.1021/jp107232u}, author = {Kolhe, Nagesh B. and Asha, S. K. and Senanayak, Satyaprasad P. and Narayan, K. S.} } @article { ISI:000280359700010, title = {Pd-functionalized carbon nanotubes for selective hydrogenation of 2-butyne-1,4-diol}, journal = {Advanced Science Letters}, volume = {3}, number = {3}, year = {2010}, month = {SEP}, pages = {313-318}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Multiwalled carbon nanotubes were prepared by thermal decomposition method followed by acid treatment and Pd-functionalization with PdCl2 by wet impregnation method. The Pd functionlized carbon nanotubes catalyst was characterized by BET, FT-IR, Raman, XRD, EDX, ICP-OES, SEM and TEM and was evaluated for its activity for hydrogenation of 2-butyne-1,4-diol. It showed higher selectivity (93\%) to 2-butene-1,4-diol than Pd supported on commercial carbon (70\% selectivity to 2-butene-1,4-diol) for complete conversion of 2-butyne-1,4-diol. The catalyst also exhibited excellent stability as evidenced by the three catalyst recycle experiments.

}, issn = {1936-6612}, doi = {10.1166/asl.2010.1128}, author = {Nadgeri, Jayprakash M. and Garade, Ajit C. and Tambe, Romana A. and Gokhale, Suresh P. and Rode, Chandrashekhar V.} } @article { ISI:000282201200049, title = {Production and characterization of a biodegradable poly (hydroxybutyrate-co-hydroxyvalerate) (PHB-co-PHV) copolymer by moderately haloalkalitolerant Halomonas campisalis MCM B-1027 isolated from Lonar Lake, India}, journal = {Bioresource Technology}, volume = {101}, number = {24}, year = {2010}, month = {DEC}, pages = {9765-9771}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Several microorganisms produce polyhydroxyalkanoates (PHA). They are accumulated intracellularly as energy storage compounds. The PHAs are of interest because of their potential in biomedical applications. Halophilic bacteria and archaea are known to produce polyhydroxybutyrate (PHB). This paper describes production of a biodegradable copolymer, PHB-co-PHV by a moderately haloalkalitolerant Halomonas campisalis, isolated from Lonar Lake, India. The production of PHA was in the range of 45-81\% on dry cell weight basis when the organism was grown in a production medium containing 1\% (w/v) maltose and 0.1\% (w/v) yeast extract, at pH ranging from 6 to 9 with an inoculum density of 10(5)-10(7) cells/ml of medium, for incubation period of 15-30 h and at 37 degrees C. The polymer produced by the organism is a hydroxyester with molecular weight of 1.3014 x 10(6). Its melting temperature was 171 degrees C. The (1)H NMR analysis revealed that the polymer was a copolymer of PHB-co-PHV. This could be achieved by providing simple carbon source viz. maltose. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Biodegradable plastics, Halomonas campisalis, Polyhydroxyalkanoates}, issn = {0960-8524}, doi = {10.1016/j.biortech.2010.07.089}, author = {Kulkarni, S. O. and Kanekar, Pradnya P. and Nilegaonkar, S. S. and Sarnaik, S. S. and Jog, Jyoti Prakash} } @article { ISI:000275985700041, title = {Pt-MoOx-carbon nanotube redox couple based electrocatalyst as a potential partner with polybenzimidazole membrane for high temperature polymer electrolyte membrane fuel cell applications}, journal = {Electrochimica Acta}, volume = {55}, number = {8}, year = {2010}, month = {MAR}, pages = {2878-2887}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A redox couple based electrocatalyst comprising of Pt-Multi Wall Carbon NanoTube (Pt-MWCNT) promoted with molybdenum oxide (MoOx, 2 \< x \< 3) nanoparticles was prepared. The objective was to effectively organize the Pt-MoOx interface on the smooth MWCNT surface to overcome the practical difficulties associated with establishing such interface with Pt dispersed on carbon morphologies possessing surface irregularities. The present study revealed the importance of stringent controlling of the additive level for maintaining a balanced bifunctional behavior of the catalyst combination through the synergistic effects by the components and the need of a proton conducting membrane operable at high temperature to get better output from the Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems. An indigenously developed polybenzimidazole (PBI) membrane was used to fabricate a membrane electrode assembly (MEA) as it can be operated at higher temperatures compared to that of Nafion membranes. MoOx additive level was carefully controlled by monitoring the active Pt area by cyclic voltammetry. All prepared electrocatalysts were characterized by using HRTEM, XRD and XPS to get information on dispersion and morphology, crystalinity and oxidation state of different elements, respectively. The system prepared with 5\% MoOx addition with respect to Pt (hereafter Pt-MoOx(5\%)-MWCNT) displayed balanced active Pt area and excellent oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) activities. Rotating Disk Electrode (ROE) system was extensively utilized to understand the ORR kinetics and the favorable role of MoOx as the promoter in the reaction. The kinetic current (j(k)) measured at 0.02 V vs. Hg/Hg2SO4 electrode from the Koutecky-Levich plots was 9 times higher and the apparent activation energy during single cell evaluation was 27 kJ/mol lower for the MoOx promoted system, compared to the system without the additive. A higher operating temperature significantly favored the cell performance by a combined effect of enhancement in proton conductivity of the PBI membrane and possible kinetic benefit by the well postulated oxygen spill over effect by the MoOx type systems in some combinations involving such systems. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Methanol oxidation reaction, MWCNT, oxygen reduction reaction, PBI membrane, PEMFC}, issn = {0013-4686}, doi = {10.1016/j.electacta.2010.01.012}, author = {Vellacheri, Ranjith and Unni, SreeKuttan M. and Nahire, Sandip and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article { ISI:000274490400085, title = {Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles}, journal = {Journal of Hazardous Materials}, volume = {175}, number = {1-3}, year = {2010}, month = {MAR}, pages = {680-687}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanoscale Fe-Pd bimetallic particles were synthesized and used for degradation of lindane (gamma-hexachlorocyclohexane) in aqueous solution. Batch studies showed that 5 mg/Lof lindane was completely dechlorinated within 5 min at a catalyst loading of 0.5 g/L and the degradation process followed first-order kinetics. GC-MS analysis in corroboration with GC-ECD results showed the presence of cyclohexane as the final degradation product. The proposed mechanism for the reductive dechlorination of lindane involves Fe corrosion-induced hydrogen atom transfer from the Pd Surface. The enhanced degradation efficiency of Fe-Pd nanoparticles is attributed to: (1) high specific surface area of the nanoscale metal particles (60 m(2)/g), manyfold greater that of commercial grade micro- or milli-scale iron particles (similar to 1.6 m(2)/g); and, (2) increased catalytic reactivity due to the presence of I{\textquoteright}d on the Surface. Recycling and column studies showed that these nanoparticles exhibit efficient and sustained catalytic activity. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic, Cyclohexane, Degradation, kinetics, Lindane, Nanoparticles}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2009.10.063}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000279085200015, title = {Regularly alternating poly(amideimide)s containing pendent pentadecyl chains: synthesis and characterization}, journal = {European Polymer Journal}, volume = {46}, number = {6}, year = {2010}, month = {JUN}, pages = {1307-1315}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Two new aromatic diamines containing preformed amide linkages, viz., N,N{\textquoteright}-(4-pentadecyl-1,3-phenylene)bis(4-aminobenzamide) I and N,N{\textquoteright}-(4-pentadecyl-1,3-phenylene)bis(3-aminobenzamide) II, were synthesized by reaction of 4-pentadecylbenzene-1,3-diamine with 4-nitrobenzoylchloride and 3-nitrobenzoylchloride, followed by reduction of the respective dinitro derivatives. A series of new poly(amideimide)s was synthesized by poly-condensation of I and II with four commercially available aromatic dianhydrides, viz., pyromellitic dianhydride (PMDA), 4,4{\textquoteright}-biphenyltetracarboxylic dianhydride (BPDA), 4,4{\textquoteright}-oxydiphthalic anhydride (ODPA), and 4,4{\textquoteright}-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) in N,N-dimethylacetamide (DMAc) employing conventional two step method via poly(amic acid) intermediate followed by thermal imidization. Reference poly(amideimide)s were synthesized by polycondensation of N,N{\textquoteright}-(1,3-phenylene)bis(4-aminobenzamide) and N,N{\textquoteright}-(1,3-phenylene)bis(3-aminobenzamide) with the same aromatic dianhydrides. Inherent viscosities of poly(amideimide)s containing pendent pentadecyl chains were in the range 0.37-1.23 dL/g in N,N-dimethylacetamide at 30 +/- 0.1 degrees C indicating the formation of medium to high molecular weight polymers. The poly(amideimide)s containing pendent pentadecyl chains were found to be soluble in N,N-dimethylacetamide, N,N-dimethylformamide, 1-methyl-2-pyrrolidinone and pyridine and could be cast into transparent, flexible and tough films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-ray diffractograms also displayed sharp reflection in the small angle region (20 approximate to 3 degrees) for poly(amideimide)s containing pentadecyl chains indicating the formation of layered structure arising from packing of flexible pentadecyl chains. The glass transition temperatures observed for reference poly(amideimide)s were in the range 331-275 degrees C and those for poly(amideimide)s containing pendent pentadecyl chains were in the range 185-286 degrees C indicating a large drop in T(g), owing to the {\textquoteleft}{\textquoteleft}internal plasticization{\textquoteright}{\textquoteright} effect of pentadecyl chains. The temperature at 10\% weight loss (T(10)), determined by TGA in nitrogen atmosphere, were in the range 460-480 degrees C indicating their good thermal stability. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Glass transition temperature, Pendent pentadecyl chain, Poly(amideimide)s, Preformed amide linkage, thermal stability}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2010.03.007}, author = {Sadavarte, Nilakshi V. and Avadhani, C. V. and Naik, Parimal V. and Wadgaonkar, Prakash P.} } @conference { ISI:000279938400011, title = {Static hyper-polarizability of open shell molecules computed at the FSMRCCSD level using constrained variational approach}, booktitle = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives}, series = {Astrophysics and Space Science Proceedings}, year = {2010}, note = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives, Indian Inst Astrophys, Kodaikanal Observatory, Bangalore, INDIA, JAN 28-31, 2009}, month = {FEB}, pages = {99-109}, publisher = {Springer}, organization = {Springer}, address = {233 Spring Street, New York, NY 10013, United States}, abstract = {

In recent years, there has been a significant development in the analytic derivatives of energy with respect to electric fields based on the state-of-the-art multi-reference coupled-cluster method using Lagrangian based constrained variational approach. So far, the Lagrangian based Fock space multi-reference coupled cluster (FSMRCC) method has been successfully used to calculate electrical dipole moment and polarizability of open shell molecules, particularly, doublet radicals at the ground state and the electronic excited states of closed shell molecules. In this article, Lagrangian based FSMRCC method has been implemented for the first time for calculation of hyper polarizabilites of a few doublet radicals such as OH, OF, NO and NO(2). Orbital-relaxed finite field FSMRCC values are reported for comparison.

}, isbn = {978-3-642-10321-6}, issn = {1570-6591}, doi = {10.1007/978-3-642-10322-3_11}, author = {Bag, Arijit and Bhattacharya, S. and Pal, S.}, editor = {Chaudhuri, R. K. and Mekkaden, M. V. and Raveendran, A. V. and Narayanan, A. S.} } @article {42725, title = {Structural diversity in manganese, iron and cobalt complexes of the ditopic 1,2- bis(2,2{\textquoteright}-bipyridyl-6-yl)ethyne ligand and observation of epoxidation and catalase activity of manganese compounds}, journal = {Royal Society of Chemistry}, volume = {39}, year = {2010}, month = {JUN}, pages = {7266-7275}, abstract = {

A ditopic 1,2-bis(2,2'-bipyridyl-6-yl)ethyne ligand, L, has been synthesized for the first time by consecutive Suzuki and Sonogashira coupling reactions either in a one- or two-step synthesis. Coordination of L with some first-row transition metals, Fe, Mn and Co showed a very rich structural diversity that can be obtained with this ligand. Reaction of L with MnII(OAc)2 yielded a dimanganese(II) complex, [Mn2L(μ-OAc)3]PF6, (1) where the two somewhat inequivalent trigonal-bipyramidal Mn atoms separated by 3.381 {\r A} are bridged by L and three acetate moieties. A similar reaction of L with MnIII(OAc)3 yielded a very different dimanganese complex [Mn2L'(OH)(OAc)2(DMF)2]PF6{\textperiodcentered}DMF (2) where L' is a E-1,2-bis(2,2'-bipyridyl-6-yl)ethene fragment that was formed in situ. The L' ligand bridges between the two Mn centers, despite its trans configuration, which leads to a very strained ethene bridging moiety. The Mn atoms are also bridged by two acetate ligands and a hydroxy group that bridges between the Mn atoms and the ethene fragment; DMF completes the octahedral coordination around each Mn atom which are separated by 3.351 {\r A}. A comproportionation reaction of L with MnII(OAc)2 and n-Bu4NMnO4 yielded a tetramanganese compound, [Mn4(μ3-O)2(OAc)4(H2O)2L2](PF6)2{\textperiodcentered}2CH3CN (3). Compound 3 has a dimer of dimers structure of the tetranuclear Mn core that consists of binuclear [Mn2O(OAc)2L]+ fragment and a PF6 anion. BVS calculations indicate that 3 is a mixed-valent 2MnII plus 2MnIII compound where two [MnII2O(OAc)2L]+ fragments are held together by MnIII{\textendash}O inter-fragment linkers which have a distorted octahedral geometry. The Mn atoms in the [Mn2O(OAc)2L]+ fragments have a capped square-pyramid configuration where an aqua ligand is capped on one of the faces. Although the aqua ligand is well within a bonding distance to a carbon atom of the proximal ethyne bridge, there does not appear to be an oxygen{\textendash}carbon bond formation, rather the ligand is constrained in this position, as deduced by the observation that the bond lengths and angles of the ligand are essentially the same as those for the free ligand, L. Reaction of L with perchlorate or triflate salts of Fe(II), Mn(II) and Co(II) in dry acetonitrile yielded binuclear triple helicate structures (2[thin space (1/6-em)]:[thin space (1/6-em)]3 metal to L ratios) [Fe2L3](CF3SO3)4{\textperiodcentered}CH3CN (4), [Mn2L3](ClO4)4{\textperiodcentered}1.7CH3CN{\textperiodcentered}1.65EtOEt (5) and [Co2L3](ClO4)4{\textperiodcentered}2CH3CN{\textperiodcentered}2EtOEt (6) where each M(II) center with a slightly distorted octahedral geometry is bridged by three of the ditopic ligands. The M{\textendash}M distances varied; 5.961 {\r A} (Mn), 6.233 {\r A} (Co) 6.331 {\r A} (Fe). Reaction of L with Co(ClO4)2{\textperiodcentered}6H2O in wet acetonitrile yielded a dicobalto(III) compound, [Co2L'3(O)2](ClO4)2{\textperiodcentered}H2O (7), with two types of L' fragments; one bridging between the two Co centers and two non-bridging ligands, each bonded to a Co atom via one bipyridyl group where the other is non-bonding. The octahedral coordination sphere around each Co atom is completed by the formation of a cobalt{\textendash}carbon bond from the two carbon atoms of the ethene moiety of the bridging ligand and by a hydroxy moiety that is also bonded to the ethene group of the non-bridging ligand. Reaction of L with Co(ClO4)2{\textperiodcentered}6H2O in dry acetonitrile in the presence of Et3N yielded the tetracobalto(II) complex {[Co2L4(OH)4](ClO4)4}2 (8) with a unique twisted square configuration of cobalt ions with Co{\textendash}Co distances of 3.938 to 4.131 {\r A}. In addition to the L bridging ligand the Co atoms are linked by hydroxy moieties. Some preliminary catalytic studies showed that the Mn compounds 1 and 2 were active (high yield within 3 min) for alkene epoxidation with peracetic acid and hydrogen peroxide dismutation (catalase activity).

}, doi = {10.1039/B925129D}, author = {Madhu, Vedichi and Ekambaram, Balaraman and Shimon, Linda J. W. and Diskin, Yael and Leitus, Gregory and Neumann, Ronny} } @article { ISI:000276190900021, title = {Structure and gelation mechanism of silk hydrogels}, journal = {Physical Chemistry Chemical Physics}, volume = {12}, number = {15}, year = {2010}, month = {FEB}, pages = {3834-3844}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Silk fibroin was regenerated from cocoons produced by the silkworm Bombyx Mori. Light scattering showed that an aqueous solution of the regenerated silk fibroin (RSF) was made of individual proteins with a weight average molar mass of about 4 x 10(5) g mol(-1) and a hydrodynamic radius of about 10 nm. Gel formation of RSF in acidic solutions was investigated as a function of the pH (2-4), concentration (0.5-10 g L(-1)) and temperature (5-70 degrees C). The structure of the gels was studied using light scattering and confocal laser scanning microscopy. The structure was found to be self-similar from length scales of less than 15 nm up to length scales of about 1 mm, and characterized by a correlation length of a few microns. Gel formation was tracked using turbidity, rheology, light scattering and circular dichroism. Gelation involves the formation of self-similar aggregates with a growth rate that increases exponentially. The protein aggregation is correlated to, and perhaps caused by, the formation of beta-sheets, the fraction of which also increases exponentially with time.

}, issn = {1463-9076}, doi = {10.1039/b916319k}, author = {Nagarkar, Shailesh and Nicolai, Taco and Chassenieux, Christophe and Lele, Ashish K.} } @article { ISI:000278592200024, title = {Syntheses, characterisation and vapour pressure of metallo-organic titanium precursor for MOCVD applications}, journal = {Inorganica Chimica Acta}, volume = {363}, number = {10}, year = {2010}, month = {JUN}, pages = {2243-2249}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Metallo-organic complexes of titanium such as [Ti(bzac)(2)(O(i)Pr)(2)] (1) and [Ti(bzac)(2)en(O(i)Pr)(2)] (2) were synthesised using 1-phenyl-1,3-butanedione (bzac) and the Schiff{\textquoteright}s base ligand N, N0-ethylene-bis(1-phenyl-1,3-butanediimine) [(bzac)(2)en]. A novel ligand 1-phenyl-3-N-(2-hydroxy-2-methylethylimino)-1-butanone (bzac1a2pol, 3) synthesised by condensing benzoylacetone (bzac) with 1-amino-2-propanol (1a2pol) was used in the synthesis of the complex bis(1-phenyl-3-N-(2-hydroxy-2-methylethylimino)-1-butanoato)titanium (IV), [Ti(bzac1a2pol)(2), 4]. These complexes were synthesised by replacing the isopropoxy group (O(i)Pr) of titanium tetra-isopropoxide, Ti(O(i)Pr)(4) by the appropriate ligands. Complexes 1, 2 and 4 were characterised for their volatility/thermal stability using TG/DTA and complex 4 was found to be volatile giving a residue of similar to 5.0\% (TG) at 377 degrees C and similar to 3.0\% (reduced pressure, 1 mbar) at 285 degrees C. Ligand 3 and its Ti complex 4 were characterised by (1)H NMR, (13)C NMR, elemental analysis, mass spectrometry and single crystal XRD. A value of 164.2 +/- 5.2 kJ mol(-1) for the standard enthalpy of sublimation (Delta H(sub)(0)) was evaluated for 4 from its vapour pressure. (C) 2010 Elsevier B. V. All rights reserved.

}, keywords = {MOCVD, Single crystal, Syntheses, Ti complexes, Vapour pressures, Volatile complexes}, issn = {0020-1693}, doi = {10.1016/j.ica.2010.03.033}, author = {Arockiasamy, S. and Manoj, Kochunnoonny and Bhadbhade, Mohan M. and Mallika, C. and Nagaraja, K. S.} } @article {42651, title = {Synthesis and characterization of novel value added biodegradable poly(aleuritic acid) from renewable resources(shellac) and invertible amphiphilic behaviors in various solvents}, journal = {E-Polymer}, year = {2010}, month = {NOV}, pages = {Article Number: 131}, abstract = {

A novel biodegradable polymer poly(aleuritic acid) (PAA) ( M̄w 120,000) was prepared from aleuritic acid, which was obtained from renewable resources (Lac) by using tin catalyst. Aleuritic acid (AL) was protected at 9, 10 position by dimethoxy propane. The protected AL (Pro.AL) was further polymerized to obtain linear protected polyaleuritic acid (PAL) by dehydropolycondensation. Effects of various kinetic and thermodynamic parameters were studied. After polymerization, the deprotection of PAL was carried out. The synthesized PAL and PAA were characterized by using various techniques such as FT-IR, LC-MS, SEC, NMR (1H and 13C), 13C CP/MAS (Cross Polarization / Magic Angle Spinning) of solid PAA, DSC, SEM and TEM etc. The micelle and inverted micelle -structure in polar and nonpolar solvents are highlighted

}, doi = {10.1515/epoly.2010.10.1.1476}, author = {Pandey, Asutosh K. and Nande, Smita S. and Selukar, Balaji S. and Garnaik, Baijayantimala} } @article { ISI:000283103300014, title = {Synthesis and characterization of polyesters based on 1,1,1-[bis(4-hydroxyphenyl)-4 {\textquoteleft}-pentadecylphenyl]ethane}, journal = {Polymer International}, volume = {59}, number = {10}, year = {2010}, month = {OCT}, pages = {1408-1414}, publisher = {JOHN WILEY \& SONS LTD}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

Aromatic polyesters are of considerable interest because of their excellent mechanical properties, chemical resistance and thermal stability. However, most aromatic polyesters are difficult to process due to their high glass transition temperatures coupled with their insolubility in common organic solvents. The present article describes a series of organosoluble polyesters and copolyesters based on 1,1,1-[bis(4-hydroxyphenyl)-4{\textquoteright}-pentadecylphenyl]ethane. A series of new aromatic polyesters containing pendant pentadecyl chains was synthesized by interfacial polycondensation of 1,1,1-[bis(4-hydroxyphenyl)-4{\textquoteright}-pentadecylphenyl]ethane with terephthalic acid chloride (TPC), isophthalic acid chloride (IPC) and a mixture of TPC and IPC. A series of copolyesters was synthesized from 4,4{\textquoteright}-isopropylidenediphenol with TPC by incorporating 1,1,1-[bis(4-hydroxyphenyl)-4{\textquoteright}-pentadecylphenyl]ethane as a comonomer. Inherent viscosities of the polyesters and copolyesters were in the range 0.72-1.65 dL g(-1) and number-average molecular weights were in the range 18 170-87 220. The polyesters and copolyesters containing pendant pentadecyl chains dissolved readily in organic solvents such as chloroform, dichloromethane, pyridine and m-cresol and could be cast into transparent, flexible and apparently tough films. Wide-angle X-ray diffraction data revealed the amorphous nature of the polyesters and copolyesters. The formation of loosely developed layered structure was observed due to the packing of pendant pentadecyl chains. The temperature at 10\% weight loss, determined using thermogravimetric analysis in nitrogen atmosphere, of the polyesters and copolyesters containing pendant pentadecyl chains was in the range 400-460 degrees C. The polyesters and copolyesters exhibited glass transition temperatures in the range 63-82 degrees C and 177-183 degrees C, respectively. (C) 2010 Society of Chemical Industry

}, keywords = {cashew nutshell liquid, CNSL, pentadecyl, polyesters, renewable}, issn = {0959-8103}, doi = {10.1002/pi.2883}, author = {More, Arvind S. and Naik, Parimal V. and Kumbhar, Kishor P. and Wadgaonkar, Prakash P.} } @article { ISI:000283124800028, title = {Synthesis of bio-compatible SPION-based aqueous ferrofluids and evaluation of radiofrequency power loss for magnetic hyperthermia}, journal = {Nanoscale Research Letters}, volume = {5}, number = {10}, year = {2010}, month = {OCT}, pages = {1706-1711}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Bio-compatible magnetic fluids having high saturation magnetization find immense applications in various biomedical fields. Aqueous ferrofluids of superparamagnetic iron oxide nanoparticles with narrow size distribution, high shelf life and good stability is realized by controlled chemical co-precipitation process. The crystal structure is verified by X-ray diffraction technique. Particle sizes are evaluated by employing Transmission electron microscopy. Room temperature and low-temperature magnetic measurements were carried out with Superconducting Quantum Interference Device. The fluid exhibits good magnetic response even at very high dilution (6.28 mg/cc). This is an advantage for biomedical applications, since only a small amount of iron is to be metabolised by body organs. Magnetic field induced transmission measurements carried out at photon energy of diode laser (670 nm) exhibited excellent linear dichroism. Based on the structural and magnetic measurements, the power loss for the magnetic nanoparticles under study is evaluated over a range of radiofrequencies.

}, keywords = {Magnetic heating, Magnetic hyperthermia, Magnetic relaxation, Power loss, Superparamagnetism}, issn = {1931-7573}, doi = {10.1007/s11671-010-9729-4}, author = {Mary, Antony P. Reena and Narayanan, T. N. and Sunny, Vijutha and Sakthikumar, D. and Yoshida, Yasuhiko and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000277203500017, title = {Template-assisted synthesis and characterization of passivated nickel nanoparticles}, journal = {Nanoscale Research Letters}, volume = {5}, number = {5}, year = {2010}, month = {MAY}, pages = {889-897}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Potential applications of nickel nanoparticles demand the synthesis of self-protected nickel nanoparticles by different synthesis techniques. A novel and simple technique for the synthesis of self-protected nickel nanoparticles is realized by the inter-matrix synthesis of nickel nanoparticles by cation exchange reduction in two types of resins. Two different polymer templates namely strongly acidic cation exchange resins and weakly acidic cation exchange resins provided with cation exchange sites which can anchor metal cations by the ion exchange process are used. The nickel ions which are held at the cation exchange sites by ion fixation can be subsequently reduced to metal nanoparticles by using sodium borohydride as the reducing agent. The composites are cycled repeating the loading reduction cycle involved in the synthesis procedure. X-Ray Diffraction, Scanning Electron Microscopy, Transmission Electron microscopy, Energy Dispersive Spectrum, and Inductively Coupled Plasma Analysis are effectively utilized to investigate the different structural characteristics of the nanocomposites. The hysteresis loop parameters namely saturation magnetization and coercivity are measured using Vibrating Sample Magnetometer. The thermomagnetization study is also conducted to evaluate the Curie temperature values of the composites. The effect of cycling on the structural and magnetic characteristics of the two composites are dealt in detail. A comparison between the different characteristics of the two nanocomposites is also provided.

}, keywords = {Nickel nanoparticles, Polymer-metal nanocomposites, Strongly acidic cation exchange resin, Stuctural and magnetic properties, Weakly acidic cation exchange resin}, issn = {1556-276X}, doi = {10.1007/s11671-010-9580-7}, author = {Gopalan, E. Veena and Malini, K. A. and Santhoshkumar, G. and Narayanan, T. N. and Joy, Pattayil Alias and Al-Omari, I. A. and Kumar, D. Sakthi and Yoshida, Yasuhiko and Anantharaman, Maliemadom R.} } @article { ISI:000287163800020, title = {Ab initio calculations of the geometry and polarizabilities of bisphenyls having aliphatic substituents}, journal = {International Journal of Quantum Chemistry}, volume = {111}, number = {5}, year = {2011}, month = {APR}, pages = {1092-1100}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

Ab initio geometry optimization and polarizability calculations of a series of bisphenyls, which are the model compounds of chemically different polycarbonates using HF/6-31G and 6-31G** basis sets are presented. Calculated absolute value of the conformationally averaged optical anisotropy () of diphenyl propane, a model analog of bisphenol A polycarbonate, is higher than the corresponding experimental value in the dilute solution phase. The calculations have reproduced the relative trend in the optical anisotropy for the different bisphenyl model compounds in a manner similar to those using semiclassical approach, by incorporation of the condensed phase polarizabilities and quantum chemically calculated geometry structure into the valence optical scheme. Individual contributions to the gas phase polarizability and optical anisotropy of the model compounds for various dihedral conformers, because of the presence of different aliphatic chemical groups, are correctly predicted by the calculations here. (C) 2010 Wiley Periodicals, Inc. Int J Quantum Chem 111: 1092-1100, 2011

}, keywords = {ab initio, bisphenyl, optical anisotropy, polarizability, Polycarbonate, structure}, issn = {0020-7608}, doi = {10.1002/qua.22687}, author = {Sulatha, M. S. and Natarajan, U.} } @article { ISI:000294378600020, title = {Active pharmaceutical ingredient (api) from an estuarine fungus, microdochium nivale (Fr.)}, journal = {Journal of Environmental Biology}, volume = {32}, number = {5}, year = {2011}, month = {SEP}, pages = {653-658}, publisher = {TRIVENI ENTERPRISES}, address = {C/O KIRAN DALELA, 1/206 VIKAS NAGAR, KURSI RD, LUCKNOW 226 022, INDIA}, abstract = {

Various marine habitats sustain variety of bio-sources of ecological and biotech potentials. Pharmaceutical potential compound Cyclosporine A was reported from marine fungus Microdochium nivale associated with Porteresia coarctata, a marine salt marsh grass from mangrove environment distributed along the Central West Coast (CWC) of India. This study involves association of M. nivale with P. coarctata plant, fermentation conditions, purification of Cyclosporine A, chemical characterization etc. Its antifungal inhibition and MIC (Minimum inhibitory concentration) against Aspergillus strains (A. niger, A. japonicus, A. fresenii), yeasts and dermatophytes (Candida sp., Cryptococcus neoformans, Trichophyton mentagrophytes, T tonsurans, T violaceum, Microsporium gypsum and Fusarium sp.) were evaluated. However, the MIC against A. japonicus, C. neoformans, Candida sp. and T. tonsurans were confirmed to be as low as 12.5-25 mg disc(-1). The antifungal properties of Cyclosporine A against Aspergillus species, yeast and dermatophytes revealed that Cyclosporine A would be a potential compound for life threatening diseases caused by above fungi in both human and animals. Furthermore, we have reported herewith another source of Cyclosporin A derived from filamentous fungus, M. nivale. occurring in marine environment.

}, keywords = {antifungal, Cyclosporine A, Estuarine environment, Microdochium nivale}, issn = {0254-8704}, author = {Bhosale, Siddharth H. and Patil, K. B. and Parameswaran, P. S. and Naik, C. G. and Jagtap, T. G.} } @article { ISI:000292735200016, title = {CFD simulation of stirred tanks: comparison of turbulence models (Part II: axial flow impellers, multiple impellers and multiphase dispersions)}, journal = {Canadian Journal of Chemical Engineering}, volume = {89}, number = {4, SI}, year = {2011}, month = {AUG}, pages = {754-816}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

In the first part of the review, published literature regarding the CFD modelling of single-phase turbulent flow in stirred tank reactors with radial flow impellers was critically analysed. A brief overview of different turbulence models (standard k-epsilon model, RNG k-epsilon model, the Reynolds stress model and large eddy simulation) as well as impeller baffle interaction models has been presented in the previous part. This part is concerned with the review of literature regarding CFD simulation of axial flow impellers. Comprehensive simulations have been carried out using various turbulence models and the model predictions (of all the mean velocities, turbulent kinetic energy and its dissipation rate) have been compared with the experimental measurements at various locations in the tank. The strengths and weaknesses of various turbulence models for axial flow impellers is presented. The quantitative comparison of exact and modelled turbulence production, transport and dissipation terms has highlighted the reasons behind the partial success of various modifications of standard k-e model as well as Reynolds stress model. Literature efforts on multiple impeller systems and multiphase systems have been discussed in a separate section. Based on these results, suggestions have been made for the future work in this area.

}, keywords = {axial flow impellers, CFD, impeller models, stirred vessel, turbulence models}, issn = {0008-4034}, doi = {10.1002/cjce.20465}, author = {Joshi, Jyeshtharaj B. and Nere, Nandkishor K. and Rane, Chinmay V. and Murthy, B. N. and Mathpati, Channamallikarjun S. and Patwardhan, Ashwin W. and Ranade, Vivek V.} } @article { ISI:000287042800004, title = {CFD simulation of stirred tanks: comparison of turbulence models. part I: radial flow impellers}, journal = {Canadian Journal of Chemical Engineering}, volume = {89}, number = {1}, year = {2011}, month = {FEB}, pages = {23-82}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A critical review of the published literature regarding the computational fluid dynamics (CFD) modelling of single-phase turbulent flow in stirred tank reactors is presented. In this part of review, CFD simulations of radial flow impellers (mainly disc turbine (DT)) in a fully baffled vessel operating in a turbulent regime have been presented. Simulated results obtained with different impeller modelling approaches (impeller boundary condition, multiple reference frame, computational snap shot and the sliding mesh approaches) and different turbulence models (standard k-epsilon model, RNG k-epsilon model, the Reynolds stress model (RSM) and large eddy simulation) have been compared with the in-house laser Doppler anemometry (LDA) experimental data. In addition, recently proposed modifications to the standard k-epsilon models were also evaluated. The model predictions (of all the mean velocities, turbulent kinetic energy and its dissipation rate) have been compared with the experimental measurements at various locations in the tank. A discussion is presented to highlight strengths and weaknesses of currently used CFD models. A preliminary analysis of sensitivity of modelling assumptions in the k-epsilon models and RSM has been carried out using LES database. The quantitative comparison of exact and modelled turbulence production, transport and dissipation terms has highlighted the reasons behind the partial success of various modifications of standard k-epsilon model as well as RSM. The volume integral of predicted energy dissipation rate is compared with the energy input rate. Based on these results, suggestions have been made for the future work in this area.

}, keywords = {CFD, impeller models, k-epsilon models, LES, radial flow impellers, RSM, stirred vessel}, issn = {0008-4034}, doi = {10.1002/cjce.20446}, author = {Joshi, Jyeshtharaj B. and Nere, Nandkishor K. and Rane, Chinmay V. and Murthy, B. N. and Mathpati, Channamallikarjun S. and Patwardhan, Ashwin W. and Ranade, Vivek V.} } @article { ISI:000291194800039, title = {Characterisation of copolymer, poly (hydroxybutyrate-co-hydroxyvalerate) (PHB-co-PHV) produced by halomonas campisalis (MCM B-1027), its biodegradability and potential application}, journal = {Bioresource Technology}, volume = {102}, number = {11}, year = {2011}, month = {JUN}, pages = {6625-6628}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Characterisation of polyhydroxyalkanoate (PHA) film produced by haloalkalitolerant Halomonas campisalis (MCM B-1027) in 14 L SS fermenter revealed it to have composition of monomer units, HB:HV as 96:4 as analysed by (1)H NMR indicating the PHA as a co-polymer of PHB-co-PHV, molecular weight by gel permeation chromatography as 2.08 x 10(6), melting temperature 166.51 degrees C, tensile strength 18.8 MPa; two relaxations namely beta transition corresponding to the glass rubber transition and alpha transition corresponding to crystalline relaxation by Dynamic Mechanical Thermal analysis and only one relaxation corresponding to MWS interfacial polarisation with activation energy of 129 kJ/mol by broadband dielectric spectroscopy. Optical microscopic studies showed typical Maltese-cross pattern of spherulites. The PHA film was found to be biodegradable by standard ASTM method as well as by soil burial method. The leak proof polymer bags prepared from the film could be used as a packaging material. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Biodegradable polymer, Copolymer PHB-co-PHV, Dielectric relaxation spectroscopy, Dynamic mechanical analysis, Halomonas}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.03.054}, author = {Kulkarni, Snehal O. and Kanekar, Pradnya P. and Jog, Jyoti Prakash and Patil, Prashant A. and Nilegaonkar, Smita S. and Sarnaik, Seema S. and Kshirsagar, Pranav R.} } @article { ISI:000288483400033, title = {Characterization of surface acid sites in tin-silicalite-1 (Sn-MFI) molecular sieve by X-ray photoelectron spectroscopy}, journal = {Microporous and Mesoporous Materials}, volume = {141}, number = {1-3}, year = {2011}, month = {MAY}, pages = {236-240}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The nature, strength and density of surface acid sites in Sn-MFI molecular sieves with different Sn-content were characterized by N 1s high resolution photoelectron peak of chemisorbed pyridine in combination with pyridine-IR and TPAD. Two peaks emerged at 399.5 +/- 0.2 and 401.5 +/- 0.2 eV by deconvoluting composite N is peak were assigned to chemisorbed pyridine on weak and relatively strong Lewis acid sites, respectively. The relative percentage of strong Lewis acid sites was found to increase with the decrease of framework Sn content. A close agreement was observed between the ratios of weak Lewis acid sites to strong Lewis acid sites obtained from XPS and TPAD. (C) 2010 Elsevier Inc. All rights reserved.

}, keywords = {Lewis acidity, Pyridine chemisorption, SiO2/SnO2 molar ratio, Sn-MFI, XPS}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2010.10.036}, author = {Niphadkar, P. S. and Patil, K. R. and Joshi, P. N.} } @article { ISI:000289764000056, title = {Control of competing hydrogenation of phenylhydroxylamine to aniline in a single-step hydrogenation of nitrobenzene to p-aminophenol }, journal = {Industrial \& Engineering Chemistry Research}, volume = {50}, number = {9}, year = {2011}, month = {MAY}, pages = {5478-5484}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Two steps involving catalytic hydrogenation of nitrobenzene to phenylhydroxylamine (PHA) in acid medium and its rearrangement to p-aminophenol (PAP) were studied separately in a batch reactor, using a well-characterized 3\% Pt/C catalyst. The first step of hydrogenation of nitrobenzene to PHA could be carried out at 303 K and a H(2) pressure of 0.69 MPa with complete conversion of nitrobenzene, while the achieved selectivity to PHA was higher than 90\% with some formation of aniline, even at lower temperature. The second step of PHA rearrangement to PAP could be achieved under a hydrogen atmosphere at elevated temperature of 353 K to give a maximum selectivity to PAP of 74\%.

}, issn = {0888-5885}, doi = {10.1021/ie102544a}, author = {Nadgeri, Jayprakash M. and Biradar, Narayan S. and Patil, Priyanka B. and Jadkar, Sachin T. and Garade, Ajit C. and Rode, Chandrashekhar V.} } @article { ISI:000294437300035, title = {Ecofriendly hydrogen production from abundant hydrogen sulfide using solar light-driven hierarchical nanostructured ZnIn2S4 photocatalyst}, journal = {Green Chemistry}, volume = {13}, number = {9}, year = {2011}, month = {JUL}, pages = {2500-2506}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

It is quite well-known that refineries are producing huge amount of H2S which has been used to produce sulphur and water using the well-known Claus process. This process is not an economically viable process, due to the high-cost chemical process and creates further acute environmental problems. Therefore, we have demonstrated the conversion of poisonous H2S into H-2 using an ecofriendly phocatalysis process which is a green unconventional energy source. We have investigated ecofriendly nanostructured ZnIn2S4 photocatalyst to produce hydrogen from H2S using solar light. We also demonstrate the controlled synthesis of hierarchical nanostructured ZnIn2S4 using a facile hydrothermal method. The morphologies obtained have been greatly influenced by the presence of triethylamine (TEA) with various concentrations during the reaction. Surprisingly, a highly crystalline hexagonal layer structured ZnIn2S4 was obtained instead of cubic spinel. The hierarchical nanostructure, i.e. marigold flower-like morphology, was obtained without any surfactant. The thin and transparent petals self-assembled to form the unique nanostructured marigold flower. The highly crystalline puffy marigold flowers and nanoplates/nanostrips were obtained using TEA-assisted hydrothermal synthesis. Optical study shows the band gap in the range of 2.34-2.48 eV. Considering the band gap in the visible region, ZnIn2S4 is used as photocatalyst for hydrogen production from hydrogen sulphide under solar light which is hitherto unattempted. The constant photocatalytic activity of hydrogen evolution, i.e. 5287 mu mol h(-1), was obtained using such hierarchical nanostructured ZnIn2S4 under visible light irradiation. It is noteworthy that the H-2 evolution rate obtained is much higher compared to earlier reported photocatalysts. Considering the significance of morphologies for photocatalytic application, the formation mechanism has also been furnished. The unique hierarchical nanostructured ZnIn2S4 ternary semiconductor having hexagonal layer will have potential applications in solar cells, LEDs, charge storage, electrochemical recording, thermoelectricity and other prospective electronic and optical devices.

}, issn = {1463-9262}, doi = {10.1039/c1gc15515f}, author = {Chaudhari, Nilima S. and Bhirud, Ashwini P. and Sonawane, Ravindra S. and Nikam, Latesh K. and Warule, Sambhaji S. and Rane, Vilas H. and Kale, Bharat B.} } @article { ISI:000289926300019, title = {Effect of blend composition and organoclay loading on the nanocomposite structure and properties of miscible poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends}, journal = {Polymer Engineering and Science}, volume = {51}, number = {5}, year = {2011}, month = {MAY}, pages = {979-991}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

Organically-modified montmorillonite clay nanocomposites of poly(styrene-co-acrylonitrile) (SAN), poly(methyl methacrylate) (PMMA) and SAN/PMMA miscible blend are investigated. Structure characteristics at the nanoscale and microscale and thermal and tensile properties are studied as a function of polymer blend composition and filler loading fraction. Blend miscibility and T(g) are unaffected by up to 10\% by wt. organoclay. Thermal degradation stability increases with SAN content and exhibits an optimum value of clay loading. Stiffness shows significant improvement. Tensile strength and elongation-at-break suffer as a result of nanocomposite formation. Modulus shows a maximum enhancement of 57\% (5 +/- 0.06 GPa at 10 wt\% filler, 20/80 SAN/PMMA) and varies linearly with clay fraction for all compositions of matrix phase. Predictions of Halpin-Tsai composite model are in excellent agreement with the experimental behavior over full range of polymer blend composition. Fundamental aspects of a polymer blend-clay nanocomposite are clarified, such as lack of additional synergy between clay platelets and matrix, and tensile ductility reduction, compared with polymer-clay system. POLYM. ENG. SCI., 51:979-991, 2011. (C) 2011 Society of Plastics Engineers

}, issn = {0032-3888}, doi = {10.1002/pen.21887}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article { ISI:000287338000001, title = {Effect of chemical substituents on the structure of glassy diphenyl polycarbonates}, journal = {Journal of Physical Chemistry B}, volume = {115}, number = {7}, year = {2011}, month = {FEB}, pages = {1579-1589}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Polycarbonates offer a wide variety of physical property behavior that is difficult to predict due to complexities at the molecular scale. Here, the physical structure of amorphous glassy polycarbonates having aliphatic and cycloaliphatic chemical groups is explored through atomistic simulations. The influence of chemical structure on solubility parameter, torsion distributions, radial distribution function, scattering structure factor; orientation distributions of phenylene rings and carbonate groups, and free volume distributions, leading to interchain packing effects, are shown. The effect of the cyclohexyl ring at the isopropylidene carbon as compared to the effect of the methyl groups positioned on the phenylene rings results in a larger reduction in the solubility parameter (delta). The interchain distance estimated for polycarbonates in this work is in the range of 5-5.8 angstrom. The o-methyl groups on the phenylene, rings, as compared to a cyclohexyl ring, lead to higher interchain distances. The highest interchain distance is observed with a trimethylcyclohexylidene group at the isopropylidene carbon. Atomistic simulations reveal two different types of packing arrangement of nearest neighbor chains in the glassy state, one type of which agrees with the NMR experimental data The fundamental insights provided here can be utilized for design of chemical structures for tailored macroscopic properties.

}, issn = {1520-6106}, doi = {10.1021/jp105954z}, author = {Sulatha, M. S. and Natarajan, Upendra} } @article { ISI:000289575500018, title = {Effect of composition on chain dimensions of styrene-methylmethacrylate random copolymers under theta condition}, journal = {Journal of Macromolecular Science Part B-Physics}, volume = {50}, number = {5}, year = {2011}, month = {APR}, pages = {996-1005}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Rotational-isomeric-state (RIS)-Metropolis Monte Carlo simulations are performed on poly(styrene-ran-methylmethacrylate) random copolymers to study the intrinsic unperturbed (theta-condition) dimensions. Mean-squared end-to-end distance (\< r(2)\>(o)), mean-squared radius of gyration (\< s(2)\>(o)), and characteristic ratio (C(n)) have been calculated for these copolymers constituted by different overall chemical compositions (styrene fractions 0.29, 0.56, and 0.70). Calculations were carried out with chains of 500 repeating units. With an increase in the styrene content there is an increase in (\< r(2)\>(o)), {\textquoteleft}, and C(n), in agreement with experimental observations. An increase in the fraction of trans conformational states in the backbone torsion angles is found to be responsible for the exhibited chain expansion behavior. The dimensions calculated by the Monte Carlo simulations agree well with experimental values reported in the literature.

}, keywords = {chain dimensions, Monte Carlo, poly(methyl methacrylate), Polystyrene, random copolymer, theta conditions}, issn = {0022-2348}, doi = {10.1080/00222348.2010.497414}, author = {Karyappa, Rahul B. and Natarajan, Upendra} } @article { ISI:000287466900022, title = {Effect of tethering on the structure-property relationship of TPU-dual modified laponite clay nanocomposites prepared by ex-situ and in-situ techniques}, journal = {Polymer}, volume = {52}, number = {4}, year = {2011}, month = {FEB}, pages = {1071-1083}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Novel Thermoplastic Polyurethane (TPU)-dual modified Laponite clay nanocomposites were prepared by ex-situ and in-situ techniques. Two types of modified clays used in this work differ from each other by the number of active functional groups (tethering). Modified nanoclays are characterized by FTIR, Solid State NMR, XRD and TGA. Structural differences in the modified clays lead to novel tubular, elliptical and spherically aggregated morphologies of clays together with the hard segments of TPU. Changes in such morphology result in the difference in segmental relaxation, mechanical and rheological properties of the nanocomposites. In-situ prepared nanocomposites register inferior properties as compared to their ex-situ counterparts. The percent improvement in tensile strength and elongation at break of the ex-situ prepared nanocomposites with the modified clay having lesser tethering are found to be 67\% and 208\%, respectively. Thermal stability is enhanced by 35 degrees C as compared to that of the neat TPU. (C) 2010 Published by Elsevier Ltd.

}, keywords = {Dual modification, Nanocomposites, Thermoplastic polyurethane}, issn = {0032-3861}, doi = {10.1016/j.polymer.2010.10.010}, author = {Mishra, Ananta K. and Chattopadhyay, Santanu and Rajamohanan, P. R. and Nando, Golok B.} } @article { ISI:000295921500010, title = {Employing homoenolates generated by NHC catalysis in carbon-carbon bond-forming reactions: state of the art}, journal = {Chemical Society Reviews}, volume = {40}, number = {11}, year = {2011}, month = {JUL}, pages = {5336-5346}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Homoenolate is a reactive intermediate that possesses an anionic or nucleophilic carbon beta to a carbonyl group or its synthetic equivalent. The recent discovery that homoenolates can be generated from alpha,beta-unsaturated aldehydes via N-Heterocyclic Carbene (NHC) catalysis has led to the development of a number of new reactions. A majority of such reactions include the use of carbon-based electrophiles, such as aldehydes, imines, enones, dienones etc. resulting in the formation of a variety of annulated as well as acyclic products. The easy availability of chiral NHCs has allowed the development of very efficient enantioselective variants of these reactions also. The tolerance showed by NHCs towards magnesium and titanium based Lewis acids has been exploited in the invention of cooperative catalytic processes. This tutorial review focuses on these and other types of homoenolate reactions reported recently, and in the process, updates the previous account published in 2008 in this journal.

}, issn = {0306-0012}, doi = {10.1039/c1cs15139h}, author = {Nair, Vijay and Menon, Rajeev S. and Biju, Akkattu T. and Sinu, C. R. and Paul, Rony Rajan and Jose, Anu and Sreekumar, Vellalath} } @article { ISI:000292011000004, title = {Eutectic mixture-directed kinetics of Diels-Alder reaction}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {50}, number = {6}, year = {2011}, month = {JUN}, pages = {788-792}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

In the search for environmentally benign solvent media, a new class of solvents composed of mixtures of carbohydrates with urea or methylated urea has been noted to be effective in enhancing the reaction rates of a bimolecular organic reaction like the Diels-Alder reaction of cyclopentadiene with methyl acrylate. The viscosity of these media appears to be an important parameter in controlling the second order kinetics.

}, keywords = {carbohydrates, Cycloaddition, Diels-Alder reaction, Dimethylurea, kinetics, Reaction rates, solvent effects, Urea, viscosity}, issn = {0376-4710}, author = {Nagare, Amit S. and Kumar, Anil} } @article { ISI:000291525400022, title = {Fabrication, thermal and electrical properties of polyphenylene sulphide/copper composites}, journal = {Materials Chemistry and Physics}, volume = {128}, number = {1-2}, year = {2011}, month = {JUL}, pages = {114-120}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The thermal and electrical properties of high performance poly(phenylene sulphide) (PPS) composites reinforced up to 31 vol\% Cu particles were investigated to be used as materials for electronic applications. The thermal stability and char yield of the composites increased significantly. Both pre- and post- glass transition coefficient of thermal expansion (CTE) of composites decreased significantly. The microhardness was increased by more than 50\% compared to pure PPS matrix. Microhardness and CTE of composites correlated well with the rule of mixtures. A percolation threshold about 6 vol\% Cu was obtained. The electrical conductivity was increased by about eight orders of magnitude for 18 vol\% composite. Dielectric constant and dissipation factor of composites at 1 MHz was increased by about 6-fold and 70-fold compared to matrix, respectively. They decreased gradually with increasing frequency up to 1 MHz and thereafter, there was insignificant change. The scanning electron microscope showed almost uniform distribution of Cu particles in the matrix. Owing to better dimensional stability and good electrical properties, these composites are very promising for electronic applications. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Dielectric property, Electrical conductivity, hardness, Thermal expansion}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2011.02.065}, author = {Goyal, R. K. and Kambale, K. R. and Nene, S. S. and Selukar, B. S. and Arbuj, Sudhir S. and Mulik, Uttam P.} } @article { ISI:000299031600049, title = {Ferroelectric and electrical characterization of multiferroic BiFeO3 at the single nanoparticle level}, journal = {Applied Physics Letters}, volume = {99}, number = {25}, year = {2011}, month = {DEC}, pages = {Article No. 252905}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Ferroelectric BiFeO3 (BFO) nanoparticles deposited on epitaxial substrates of SrRuO3 (SRO) and La1-xSrxMnO3 (LSMO) were studied using band excitation piezoresponse spectroscopy (BEPS), piezoresponse force microscopy (PFM), and ferromagnetic resonance (FMR). BEPS confirms that the nanoparticles are ferroelectric in nature. Switching behavior of nanoparticle clusters were studied and showed evidence for inhomogeneous switching. The dimensionality of domains within nanoparticles was found to be fractal in nature, with a dimensionality constant of similar to 1.4, on par with ferroelectric BFO thin-films under 100 nm in thickness. Ferromagnetic resonance studies indicate BFO nanoparticles only weakly affect the magnetic response of LSMO. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3671392]

}, issn = {0003-6951}, doi = {10.1063/1.3671392}, author = {Vasudevan, R. K. and Bogle, Kashinath A. and Kumar, A. and Jesse, S. and Magaraggia, R. and Stamps, R. and Ogale, Satishchandra B. and Potdar, H. S. and Nagarajan, V.} } @article { ISI:000293492300024, title = {Influence of Al3+ insertion in the stannosilicate MFI framework on the catalytic performance in vapor phase aniline N-methylation}, journal = {Applied Catalysis A-General}, volume = {401}, number = {1-2}, year = {2011}, month = {JUL}, pages = {182-188}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Silica-based Sn-MFI, Al-MFI and Al-Sn-MFI molecular sieves were synthesized by hydrothermal crystallization of gels having molar compositions SiO2:xSnO(2):yAl(2)O(3):0.23 (TPA)(2)O:35H(2)O, where x ranges from 1/0 to 1/200 and y from 1/0 to 1/400. Keeping molar Si/(Al + Sn) = 50, the amount of tin and aluminum in hydrogel was varied (Sn:Al molar ratios = 1:0, 1:0.33, 1:1, 1:3, 0:1) to investigate the synergy between Lewis and Bronsted acid sites in acid catalyzed aniline N-methylation reaction. Catalyst characterization was done by Powder X-ray diffraction, DRUV-vis spectroscopy, temperature programmed ammonia desorption (TPAD) and FTIR spectroscopy. An increase in the Al3+ insertion in Sn-MFI framework resulted in the increase in the stronger acid sites. Al-Sn-MFI showed higher aniline conversion than their monometallic counterparts. A sample having B/L ratio in between 0.67 and 0.91 was found to be optimum for maximizing the NMA yield, indicating the existence synergistic properties of Al-Sn-MFI. Upon process parameter optimization, the optimum sample M50 [Si/Al = 50.2, Si/Sn = 93.8, Si/(Al + Sn) = 43.2] showed the maximum aniline conversion (67\%) and NMA selectivity (81\%) at reaction temperature = 220 degrees C, weight hourly space velocity (WHSV) = 3 h(-1), molar ratio (aniline to methanol) = 1:8 and TOS = 4 h. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Al-Sn-MFI, Aniline, Bronsted and Lewis acid, Methanol, N-methylaniline}, issn = {0926-860X}, doi = {10.1016/j.apcata.2011.05.019}, author = {Niphadkar, P. S. and Joshi, P. N. and Deshpande, Suvarna S. and Bokade, Vijay V.} } @article { ISI:000293419700048, title = {Kinetics of nitric oxide adsorption on Pd(111) surfaces through molecular beam experiments: a quantitative study}, journal = {Journal of Physical Chemistry C}, volume = {115}, number = {31}, year = {2011}, month = {AUG}, pages = {15487-15495}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A detailed kinetic picture derived by molecular beam studies of the adsorption-desorption of the NO/Pd(111) system is presented. Numerical simulations and detailed kinetic analysis show that the precursor state model of adsorption provides a valid picture of the sticking coefficient variation with surface coverage, especially at low temperatures. At higher temperatures, the precursor model gives way to the Langmuir molecular model of adsorption. All the parameters of the precursor state model have been quantified. Temperature programmed desorption (TPD) studies further show that there is a slight repulsive interaction between adsorbed NO molecules and there is only a negligible fraction of dissociated molecules on the surface for temperatures less than 500 K, as the Pd(111) surface is defect free. A Bragg-Williams (BW) lattice gas model with repulsive interactions, within the framework of mean field approach (MFA), is shown to describe the TPD spectra reasonably well.

}, issn = {1932-7447}, doi = {10.1021/jp203992r}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S. and Prasad, Sudarsan D.} } @article { ISI:000292962900073, title = {Ligand dynamics controlled reverse spin cross over in bis pyrazolyl pyridine based Fe(II) complex cation with metallodithiolato anions with an example of a ferromagnetic 2:1 cocrystal of mixed Ni(III)/Ni(II) oxidation states}, journal = {Inorganica Chimica Acta}, volume = {374}, number = {1, SI}, year = {2011}, month = {AUG}, pages = {586-600}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

We report here the crystal and molecular structures of three compounds [FeL(2)] [Ni(mnt)(2)] (1), [FeL(2)](2) [Ni(mnt)(2)](3)center dot 2H(2)O (2) and [FeL(2)] [Cu(mnt)(2)]center dot 2CH(3)CN (3) where L = 2,6-bis(3,5-dimethylpyrazol-1-ylmethyl) pyridine and mnt = maleonitriledithiolate, and their detailed spectroscopic and magnetic properties using variable temperature Mssbauer, EPR, susceptibility studies, along with room temperature electron spectroscopy for chemical analysis (ESCA) studies. The observed temperature dependant high spin/low spin (HS/LS) ratios of [FeL(2)](2+) cations in these lattices, exhibiting {\textquoteleft}reverse spin cross-over{\textquoteright} measured unequivocally by Mssbauer, have been interpreted as resulting from differing amount of {\textquoteleft}void space{\textquoteright} in the lattice, a measure of the ease of lattice dynamics originating from ligand L. Differential scanning calorimetric data points this HS/LS transition to order-disorder type of second order phase transitions. While trying to test this lattice dynamics controlled property of [FeL(2)](2+) cations an unusual behavior of cocrystallization of two planar complex anions of the same type in two different oxidation states, viz. [Ni(mnt)(2)](2) and [Ni(mnt)(2)] , was observed in [FeL(2)](2+) [Ni(mnt(2))](3), supported by crystallography, ESCA chemical shifts of Ni 2p(3/2) and EPR. The susceptibility data in combination with ESCA chemical shifts of S 2p(3/2) and Ni 2p(3/2) on all the compounds reveal the importance of charge transfer between the two counter ions. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Iron complexes, Magnetism, Reverse-spin crossover, X-ray crystal structures}, issn = {0020-1693}, doi = {10.1016/j.ica.2011.02.081}, author = {Manoharan, Periakaruppan T. and Sambandam, Balaji and Amsarani, Ramamoorthy and Varghese, Babu and Gopinath, Chinnakonda S. and Nomura, Kiyoshi} } @article { ISI:000288772300011, title = {Magnetic properties of thermal plasma synthesized nanocrystalline nickel ferrite (NiFe2O4)}, journal = {Journal of Alloys and Compounds}, volume = {509}, number = {12}, year = {2011}, month = {MAR}, pages = {4404-4413}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A rapid synthesis method is reported for magnetic nanoparticles of nickel ferrite involving thermal plasma assisted vapor phase condensation process. The as-synthesized samples were characterized by X-ray Diffraction, Transmission Electron Microscopy, Vibrating Sample Magnetometer and X-ray Photoelectron Spectroscopy techniques. The average particle size was determined from the TEM micrographs and found to be around 30 nm. The effects of reactor parameters on the magnetic and structural properties have been evaluated, to find the optimized parameters so as to achieve the highest values of saturation magnetization and coercivity. Reasonably high saturation magnetization (48 emu/g) has been assigned to the high degree of crystallinity, achieved on account of high temperature during the growth, and the cation redistribution. The high value of coercivity (1150e) is explained on the basis of possible lattice defects arising from the cation redistribution. Detailed analysis of cation distribution using the XRD line intensity data leads to the conclusion that these samples are iron deficit and nickel rich. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {crystal structure, Magnetic measurements, Magnetization, Nanostructured materials, TEM}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2011.01.057}, author = {Nawale, Ashok B. and Kanhe, Nilesh S. and Patil, K. R. and Bhoraskar, S. V. and Mathe, Vikas L. and Das, A. K.} } @article { ISI:000297792700001, title = {Mode-coupling glass transition in a fluid confined by a periodic potential}, journal = {Physical Review E}, volume = {84}, number = {6, 1}, year = {2011}, month = {DEC}, pages = {061501}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We show that a fluid under strong spatially periodic confinement displays a glass transition within mode-coupling theory at a much lower density than the corresponding bulk system. We use fluctuating hydrodynamics, with confinement imposed through a periodic potential whose wavelength plays an important role in our treatment. To make the calculation tractable we implement a detailed calculation in one dimension. Although we do not expect simple 1d fluids to show a glass transition, our results are indicative of the behavior expected in higher dimensions. In a certain region of parameter space we observe a three-step relaxation reported recently in computer simulations [S. H. Krishnan, Ph.D. thesis, Indian Institute of Science (2005); Kim et al., Eur. Phys. J. Special Topics 189, 135 (2010)] and a glass-glass transition. We compare our results to those of Krakoviack [Phys. Rev. E 75, 031503 (2007)] and Lang et al. [Phys. Rev. Lett. 105, 125701 (2010)].

}, issn = {1539-3755}, doi = {10.1103/PhysRevE.84.061501}, author = {Nandi, Saroj Kumar and Bhattacharyya, Sarika Maitra and Ramaswamy, Sriram} } @article { ISI:000289763700002, title = {Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol}, journal = {Materials Research Bulletin}, volume = {46}, number = {5}, year = {2011}, month = {MAY}, pages = {635-638}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In the present investigation, we have demonstrated the synthesis of novel photocatalyst, zinc indium vanadate (ZIV) by solid solid state route using respective oxides of zinc, indium and vanadium. This novel photocatalyst was characterized using XRD, FESEM, UV-DRS and FTIR in order to investigate its structural, morphological and optical properties. XRD clearly shows the formation of phase pure ZIV of triclinic crystal structure with good crystallinity. FESEM micrographs showed the clustered morphology having particle size between 0.5 and 1 mu m. Since, optical study showed the band gap around 2.8 eV, i.e. in visible region, we have performed the photocatalytic activity of phenol degradation under visible light irradiation. The photodecomposition of phenol by ZIV is studied for the first time and an excellent photocatalytic activity was obtained using this novel photocatalyst. Considering the band gap of zinc indium vanadate in visible region, it will also be the potential candidate for water splitting. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Catalytic properties, Chemical synthesis, Oxides, X-ray diffraction}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2011.02.005}, author = {Mahapure, Sonali A. and Rane, Vilas H. and Ambekar, Jalindar D. and Nikam, Latesh K. and Marimuthu, R. and Kulkarni, Milind V. and Kale, Bharat B.} } @article { ISI:000286902200016, title = {One-pot synthesis of 2,4,5-trisubstituted imidazoles using MoO3/SiO2, an efficient and recyclable catalyst}, journal = {Synthetic Communications}, volume = {41}, number = {5}, year = {2011}, month = {JAN}, pages = {PII 932996516}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

[image omitted] A simple one-pot synthesis has been developed for the synthesis of 2,4,5-trisubstituted imidazoles using an efficient and recyclable MoO3/SiO2 solid acid catalyst by condensation of benzil or benzoin, benzaldehyde, and ammonium acetate in acetonitrile as a solvent. Using this solid catalyst, the reactions could be carried out under mild reaction conditions with very good yield of imidazoles, up to 95\%. This catalyst could be recycled very easily, which makes this methodology environmentally benign.

}, keywords = {benzil, benzoin, cyclocondensation, imidazoles, MoO3, One-pot, SiO2, solid acid}, issn = {0039-7911}, doi = {10.1080/00397911003644415}, author = {Bhosale, Sidhanath V. and Kalyankar, Mohan B. and Nalage, Santosh V. and Bhosale, Dattatry S. and Pandhare, Swati L. and Kotbagi, Trupti V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article { ISI:000292983400023, title = {[Pd]-mediated omega-alkynone cycloisomerization approach for the central tetrahydropyran unit and the synthesis of C(31)-C(48) fragment of aflastatin A}, journal = {Organic \& Biomolecular Chemistry}, volume = {9}, number = {15}, year = {2011}, month = {APR}, pages = {5469-5475}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A concise assembly of the central tetrahydropyran unit of aflastatin A featuring a Pd-mediated alkynone cycloisomerization to provide a glycal and its subsequent stereoselective hydroboration to deliver the requisite stereochemistry at C(33) and C(34) centers is documented.

}, issn = {1477-0520}, doi = {10.1039/c1ob05251a}, author = {Narute, Sachin B. and Kiran, Neella Chandra and Ramana, Chepuri V.} } @article {42719, title = {Photocatalytic splitting of CS2 to a carbon-sulfur polymer and S8 catalyzed by a bimetallic ruthenium(II) compound with a tertiary amine binding site - towards photocatalytic splitting of CO2?}, journal = {Inorganic Chemistry}, volume = {50}, year = {2011}, month = {OCT}, pages = {11273{\textendash}11275}, abstract = {

The catalytic photocleavage of CS2 to S8 and a (CxSy)n polymer with visible light using a dinuclear ruthenium(II) compound with a bipyridine units for photoactivity and a vicinal tertiary amine binding site for CS2 activation was studied. The catalyst was characterized by X-ray diffraction, 1H NMR, and 13C NMR, ESI-MS and elemental analysis. CS2 photocleavage was significant (240 turnovers, 20 h) to yield isolable S8 and a (CxSy)n polymer. A mononuclear catalyst or one without an amine binding site showed significantly less activity. XPS of the (CxSy)n polymer showed a carbon/sulfur ratio \~{}1.5{\textendash}1.6 indicating that in part both C{\textendash}S bonds of CS2 had been cleaved. Catalyst was also included within the polymer. The absence of peaks in the 1H NMR verified the (CxSy)n nature of the polymer, while 13C NMR and IR indicated that the polymer had multiple types of C{\textendash}S and C{\textendash}C bonds.

}, doi = {10.1021/ic2008045}, author = {Livanov, Konstantin and Madhu, Vedichi and Balaraman, Ekambaram and Shimon, Linda J. W. and Diskin-Posner, Yael and Neumann, Ronny} } @article { ISI:000287058200053, title = {Polybenzimidazoles based on 3,3 {\textquoteleft}-diaminobenzidine and aliphatic dicarboxylic acids: synthesis and evaluation of physicochemical properties toward their applicability as proton exchange and gas separation membrane material}, journal = {Journal of Applied Polymer Science}, volume = {120}, number = {2}, year = {2011}, month = {APR}, pages = {1090-1099}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A series of aromatic-aliphatic polybenzimidazoles (PBIs) based on 3,3{\textquoteright}-diaminobenzidine (DAB) and aliphatic dicarboxylic acid with incremental -CH2- groups were synthesized. Optimization of synthesis parameters and evaluation of physicochemical properties are requisite for PBI applicability as the proton exchange membrane (PEM) and gas separation membrane materials are reported. It was found that though all these PBIs exhibited high thermal, mechanical, and oxidative stability, effect of added flexibility on physical properties is not monotonous. Membranes were prepared by solution casting as well as phase-inversion method. The later types of membranes exhibited much higher H3PO4 content than its doping achieved in the solution casted membranes. These PBIs possess low hydrogen and helium permeability than that of conventional PBI. This low permeability, along with their excellent oxidative stability indicated that they can be promising PEM materials. Their CO2-sorption analysis revealed that PBI6 based on suberic acid possesses appreciable CO2 sorption. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 1090-1099, 2011

}, keywords = {Gas permeation, mechanical properties, membranes, oxidative stability, polybenzimidazoles}, issn = {0021-8995}, doi = {10.1002/app.33246}, author = {Bhavsar, Rupesh S. and Nahire, Sandip B. and Kale, Mrunali S. and Patil, Shubhangi G. and Aher, Pradnya P. and Bhavsar, Ritesh A. and Kharul, Ulhas K.} } @article { ISI:000296172800062, title = {Possible deNO(x) management under net oxidizing conditions: a molecular beam study of (NO)-N-15+CO+O-2 reaction on Pd(111) surfaces}, journal = {Journal of Physical Chemistry C}, volume = {115}, number = {43}, year = {2011}, month = {NOV}, pages = {21299-21310}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Isothermal kinetic measurements of (NO)-N-15 reduction with CO on Pd(111) surfaces were carried out under net-oxidizing conditions with (NO)-N-15 + CO + O-2, using a molecular beam instrument (MBI). Transient state (TS) and steady state (SS) kinetic details of the above reaction were obtained for a wide range of temperature and beam compositions, especially with O-2-rich compositions. Increasing O-2 content, generally, suppresses (NO)-N-15 reduction in the SS; nonetheless, irrespective of O-2 content, N-15(2) was produced in TS, and to a significant extent under SS conditions too. Sustainable N-2 production between 450 and 600 K and with low to moderate amount of oxygen was observed, and the extent of NO decomposition was also quantified. The ratio of N-15(2): (N2O)-N-15 was generally found to be around 8:1 under most of the reaction conditions. Maxima in the SS reaction rates of all products were observed between 500 and 600 K. Compared to other elementary reaction steps, a slow decay observed with N + N -\> N-2 step under SS beam oscillation conditions demonstrates its contribution to the rate limiting nature of the overall reaction. Fast beam switching experiments have been performed alternately between O-2-lean and -rich conditions, thus highlighting the effectiveness of (NO)-N-15 reduction in TS, irrespective of the beam composition. Possibly in a future technology initiative, this aspect could be exploited to manage more (NO)-N-15 reduction on Pd-based catalysts.

}, issn = {1932-7447}, doi = {10.1021/jp207092s}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S.} } @article { ISI:000297352000112, title = {Preparation and characterization of magnetic nanoparticles embedded in hydrogels for protein purification and metal extraction}, journal = {Journal of Polymer Research}, volume = {18}, number = {6}, year = {2011}, note = {International Conference on Advances in Polymer Technology, Cochin Univ Sci \& Technol, Cochin, INDIA, FEB 26-27, 2010}, month = {NOV}, pages = {2285-2294}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The present work involves the development of hydrogel magnetic nanocomposites for protein purification and heavy metal extraction applications. The magnetic nanoparticles (MNPs) were prepared in situ in poly(acrylamide)-gum acacia (PAM-GA) hydrogels. The formation of magnetic nanoparticles in the hydrogel networks was confirmed by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Scanning electron (SEM) microscopy studies revealed the formation of MNPs throughout the hydrogel networks. The average size of MNPs formed in the hydrogel networks was 3-5 nm as determined by transmission electron microscopy (TEM). The thermal properties of the hydrogel magnetic nanocomposites were evaluated by dynamic scanning calorimetry (DSC) and thermogravimetric (TG) analysis. The magnetic properties of the developed hydrogel magnetic nanocomposites were determined by a vibrating sample magnetometer (VSM). The swelling properties of the hydrogel and the hydrogel magnetic nanocomposites were studied in detail. The hydrogel magnetic nanocomposites are utilized for the removal of toxic metal ions such as Co(II), Ni(II), and Cu(II) and for protein purification. The results confirm that the hydrogel magnetic nanocomposites exhibit superior extraction properties to hydrogels.

}, keywords = {Bioseparation, Hydrogel, magnetic properties, Metal absorption, Nanocomposite}, issn = {1022-9760}, doi = {10.1007/s10965-011-9642-2}, author = {Nagireddy, Narayana Reddy and Yallapu, Murali Mohan and Kokkarachedu, Varaprasad and Sakey, Ravindra and Kanikireddy, Vimala and Alias, Joy Pattayil and Konduru, Mohana Raju} } @article { ISI:000297741100014, title = {Purification, crystallization and preliminary X-ray characterization of a haemagglutinin from the seeds of Jatropha curcas}, journal = {Acta Crystallographica Section F-Structural Biology and Crystallization Communications}, volume = {67}, number = {12}, year = {2011}, month = {DEC}, pages = {1534-1536}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

The plant Jatropha curcas (Euphorbiaceae) is an important source of biofuel from the inedible oil present in its toxic seeds. The toxicity arises from the presence of curcin, a ribosome-inactivating protein showing haemagglutination activity. In this communication, the purification, crystallization and preliminary X-ray characterization are reported of a small protein isolated from J. curcas seeds with a molecular mass of 10 kDa that agglutinates rabbit erythrocytes. The protein was crystallized using the hanging-drop vapour-diffusion method and also by the microbatch method in 72-well HLA plates, using PEG 8000 as the precipitant in both conditions. X-ray diffraction data collected from the rod-shaped crystals were processed in the orthorhombic space group P212121. The crystals diffracted to 2.8 angstrom resolution at 103 K.

}, keywords = {haemagglutinins, Jatropha curcas}, issn = {1744-3091}, doi = {10.1107/S1744309111038218}, author = {Nair, Divya N. and Suresh, C. G. and Singh, Desh Deepak} } @article { ISI:000290745300004, title = {Scaling laws for gas-solid riser flow through two-fluid model simulation}, journal = {Particuology}, volume = {9}, number = {2}, year = {2011}, month = {APR}, pages = {121-129}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Scale up of gas-solid circulating fluidized bed (CFB) risers poses many challenges to researchers. In this paper, CFD investigation of hydrodynamic scaling laws for gas-solid riser flow was attempted on the basis of two-fluid model simulations, in particular, the recently developed empirical scaling law of Qi, Zhu, and Huang (2008). A 3D computational model with periodic boundaries was used to perform numerical experiments and to study the effect of various system and operating parameters in hydrodynamic scaling of riser flow. The Qi scaling ratio was found to ensure similarity in global parameters like overall cross-sectional average solid holdup or pressure drop gradient. However, similarity in local flow profiles was not observed for all the test cases. The present work also highlighted the significance of error bars in reporting experimental values. (C) 2010 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

}, keywords = {CFD, Error bar, Periodic boundary, Risers, Scaling, Two-fluid model}, issn = {1674-2001}, doi = {10.1016/j.partic.2010.09.010}, author = {Naren, P. R. and Ranade, Vivek. V.} } @article { ISI:000287092000033, title = {Self assembled CdLa2S4 hexagon flowers, nanoprisms and nanowires: novel photocatalysts for solar hydrogen production}, journal = {Journal of Materials Chemistry}, volume = {21}, number = {8}, year = {2011}, month = {JAN}, pages = {2624-2631}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report here a new ternary chalcogenide material, cadmium lanthanum sulfide (CdLa2S4) produced using a facile hydrothermal method at 433 K. The effect of the solvent on the morphology of the CdLa2S4 was demonstrated for the first time. The prima facie observations revealed the formation of highly crystalline hexagonal structures in the form of flowers in aqueous medium. The flowers comprise hexagonal columns similar to 300 nm in diameter and 1-1.2 mu m in length. All the hexagonal structures have a sharp tip with a cavity of 10 nm and are almost equal in size. The nanoprisms have an average base size of 35 nm with 35 nm edges, and the nanowires have a diameter of 10-15 nm; both were obtained in methanol. Crystal and electronic structure calculations were performed using the Vienna ab initio simulation package (VASP) based on density functional theory (DFT). Considering the band gap of pristine CdLa2S4 in the visible region (2.3 eV), we have demonstrated CdLa2S4 as a photocatalyst for the production of H-2 under solar light. Nanostructured CdLa2S4 prisms gave the maximum hydrogen production, i.e. 2552 mu mol h(-1). Being a stable ternary nanostructured metal sulfide (with nanohexagons, nanoprisms, nanowires), CdLa2S4 may have other potential prospective applications in solar cells and optoelectronic devices.

}, issn = {0959-9428}, doi = {10.1039/c0jm02890h}, author = {Kale, Bharat B. and Baeg, Jin-Ook and Kong, Ki-jeong and Moon, Sang-Jin and Nikam, Latesh K. and Patil, Kashinath R.} } @article { ISI:000291903100003, title = {Strain improvement and statistical media optimization for enhanced erythritol production with minimal by-products from candida magnoliae mutant R23}, journal = {Biochemical Engineering Journal}, volume = {55}, number = {2}, year = {2011}, month = {JUL}, pages = {92-100}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Mutants of Candida magnoliae NCIM 3470 were generated by ultra-violet and chemical mutagenesis to enhance erythritol production. The mutants were screened for higher reductase activity on agar plates containing high concentration of glucose and 2,3,5-triphenyl tetrazolium chloride (TTC). One of the mutants named as R23 gave maximum erythritol production, 60.3 g L(-1), compared to 14 g L(-1) of the parent strain. Glucose and yeast extract were identified as critical medium components which decide the ratio of polyols produced, mainly erythritol, mannitol and glycerol. In order to enhance the production of erythritol and to minimize the production of mannitol and glycerol, a four component-five level-three response central-composite-rotatable-design (CCRD) of response surface methodology (RSM) model was used. The optimum medium composition for erythritol production was found to contain (g L(-1)) glucose 238, yeast extract 9.2, KH(2)PO(4), 5.16 and MgSO(4) 0.23. Moreover, erythritol production was studied in a 10 L fermentor in batch and fed-batch mode using RSM optimized medium. In fed-batch fermentation, 87.8 g L(-1) erythritol was produced with 31.1\% yield, without formation of any other polyols. Thus present study involving strain improvement followed by media and process optimization resulted in 6.2-fold increase in erythritol production and 3.4-fold increase in the yield. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Candida magnoliae, Erythritol, Fermentation, Metabolite over-production, Modelling, Optimization}, issn = {1369-703X}, doi = {10.1016/j.bej.2011.03.009}, author = {Savergave, Laxman S. and Gadre, Ramchandra V. and Vaidya, Bhalchandra K. and Narayanan, Karthik} } @article { ISI:000288835000010, title = {Structure-property of thermoplastic polyurethane-clay nanocomposite based on covalent and dual-modified laponite}, journal = {Journal of Computational and Theoretical Nanoscience}, volume = {4}, number = {1}, year = {2011}, month = {JAN}, pages = {65-73}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Modification of surface of clay platelets by ionic and covalent modification techniques renders it to be easily dispersed in polymers like, Thermoplastic Polyurethane (TPU). Only ionic or covalent modification techniques in isolation are not sufficient to achieve uniform nanoscale dispersion of Laponite (synthetic hectorite nanoclay) in TPU. Hence, the dual modification of Laponite (both ionic and covalent) is performed and the effects of the modification on the morphology, thermal and rheological behaviors of the TPU-modified clay nanocomposites have been studied. The degree of exfoliation of clay platelet in TPU matrix is found to be higher for dual functionalized nanoclays compared to their singly modified counterparts. Interestingly, dual modified Laponite clays prepared by using two different techniques (ionic followed by covalent and covalent followed by ionic) exhibit different morphology and properties. The dual modified clays significantly alter the equilibrium morphology of TPU. The storage modulus of the dual modified Laponite-TPU nanocomposite in the glassy region (at -60 degrees C) land in the rubbery region (+98 degrees C) is improved by 172.8\% and 85\%, respectively as compared to the neat TPU. Similarly, the onset of degradation is found to be enhanced by 28.7 degrees C as compared to the neat TPU.

}, keywords = {Dual modification, Laponite Nanocomposite, Morphology, Structure-Property, Thermoplastic polyurethane}, issn = {1936-6612}, doi = {10.1166/asl.2011.1174}, author = {Mishra, Ananta K. and Rajamohanan, P. R. and Nando, Golok B. and Chattopadhyay, Santanu} } @article { ISI:000298175400040, title = {Studies on the feasibility of recycled polystyrene doped with NLO active meta-Nitroaniline for optoelectronics applications}, journal = {Polymers for Advanced Technologies}, volume = {22}, number = {12}, year = {2011}, month = {DEC}, pages = {1865-1871}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A Guest-Host system based on meta-Nitroaniline (m-NA) and recycled polystyrene (RPS) susceptible to generate nonlinear optically (NLO) active property such as second harmonic generation (SHG) has been prepared. Pure, sublimed, optical grade, crystalline m-NA is used as a guest and RPS from the disposable packaging waste as available utilized as the host polymer. In this paper we report the effect of NLO active m-NA on the bulk and optical properties of RPS. The purified m-NA was incorporated from 1-10 wt\% in the RPS polymer matrix by conventional solution casting method. Thin, transparent, freestanding films obtained were characterized with optical microscope, scanning electron microscope (SEM), viscosity measurement, and UV-Visible (UV-Vis) spectroscopy for bulk properties evaluation and Nd:YAG laser studies for optoelectronics application such as SHG through frequency doubling. Copyright (C) 2010 John Wiley \& Sons, Ltd.

}, keywords = {frequency doubling, guest-host NLO systems, meta-Nitroaniline, nonlinear optical activity, Polystyrene, second harmonic generation}, issn = {1042-7147}, doi = {10.1002/pat.1685}, author = {Sureshkumar, M. S. and Goyal, R. K. and Negi, Y. S. and Pratheepkumar, A. and Reddy, K. Raghunatha and Singh, R. P. and Dadge, Jagdish W. and Aiyer, Rohini C.} } @article { ISI:000294982800015, title = {Surfactant tunable hierarchical nanostructures of CdIn2S4 and their photohydrogen production under solar light}, journal = {International Journal of Hydrogen Energy}, volume = {36}, number = {18}, year = {2011}, month = {SEP}, pages = {11628-11639}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The hierarchical nanostructures of CdIn2S4 were selectively prepared through hydrothermal process in the presence of different surfactants. Structural study demonstrated existence of cubic spinel structure and micro structural study shown a pretty marigold flower like morphology without any surfactant. The effect of surfactants on the morphology and microstructure of CdIn2S4 has been studied by using Polyvinyl pyrrolidone (PVP) and Cetyltrimethyl ammonium bromide (CTAB) as a surfactants. The CdIn2S4 bipyramids with length of 0.7-1 mu m have been obtained using PVP. Interestingly, the nanopetals (thin and transparent) of CdIn2S4 are self assembled into hollow spheres in the presence of CTAB. Considering the importance of these unique nanostructures, the growth mechanism has also been proposed. The optical properties demonstrated the band gap in the range of 2.12-2.29 eV which is well within the visible region. In this contest, photocatalytic activity for hydrogen production using the above nanostructures under visible light was also demonstrated. The prima-fascia observations shows that the bipyramidal CdIn2S4 exhibit excellent photocatalytic activity for hydrogen production (3238 mu molh(-1)) than other nanostructures. Being a nanostructured semiconductor chalcogenide with a good stability will also have potential applications in solar cells and LED. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Bipyramids, CdIn2S4, Hydrogen generation, hydrothermal, Self-assembled}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2011.06.061}, author = {Bhirud, Ashwini P. and Chaudhari, Nilima and Nikam, Latesh and Sonawane, Ravindra and Patil, Kashinath and Baeg, Jin-Ook and Kale, Bharat} } @article {42822, title = {Systems view of the protein expression process}, journal = {Systems and Synthetic Biology}, volume = {5}, year = {2011}, month = {DEC}, pages = {139{\textendash}150}, abstract = {

Many biological processes are regulated by changing the concentration and activity of proteins. The presence of a protein at a given subcellular location at a given time with a certain conformation is the result of an apparently sequential process. The rate of protein formation is influenced by chromatin state, and the rates of transcription, translation, and degradation. There is an exquisite control system where each stage of the process is controlled both by seemingly unregulated proteins as well as through feedbacks mediated by RNA and protein products. Here we review the biological facts and mathematical models for each stage of the protein production process. We conclude that advances in experimental techniques leading to a detailed description of the process have not been matched by mathematical models that represent the details of the process and facilitate analysis. Such an exercise is the first step towards development of a framework for a systems biology analysis of the protein production process.

}, doi = {10.1007/s11693-011-9088-1}, author = {Gokhale, Sucheta A. and Nyayanit, Dimpal and Gadgil, Chetan J.} } @article { ISI:000299176700007, title = {1,2-Benzoquinones in Diels-Alder reactions, dipolar cycloadditions, nucleophilic additions, multicomponent reactions and more}, journal = {Chemical Society Reviews}, volume = {41}, number = {3}, year = {2012}, month = {SEP}, pages = {1050-1059}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A brief account of the recent developments in the chemistry of 1,2-benzoquinones is presented in this tutorial review. The title compounds exhibit commendable versatility in both Diels-Alder and dipolar cycloaddition reactions. They have also been employed as electrophilic reaction partners in nucleophile-triggered catalytic processes and related multicomponent reactions. These, along with other reactions described here, lead to the synthesis of densely functionalised carbocyclic and heterocyclic frameworks that are otherwise difficult to access.

}, issn = {0306-0012}, doi = {10.1039/c1cs15186j}, author = {Nair, Vijay and Menon, Rajeev S. and Biju, Akkattu T. and Abhilash, K. G.} } @article { ISI:000313235300008, title = {4(R/S)-Amino/guanidino-substituted proline peptides: design, synthesis and DNA transfection properties}, journal = {Chimia}, volume = {66}, number = {12, 1}, year = {2012}, month = {DEC}, pages = {936-940}, publisher = {SWISS CHEMICAL SOC}, address = {SCHWARZTORSTRASSE 9, CH-3007 BERN, SWITZERLAND}, abstract = {

Collagen is a major structural protein found in the connective tissues of higher organisms and mammals and its biomechanical properties are related to the high thermal stability of its triple helical structure. The primary structure of collagen is composed of the repeating tripeptide motif of Pro-Hyp-Gly, where Hyp is 4R-hydroxy proline. Cationic collagen mimetics consisting of [Pro(X)-Pro(Y)-Gly](6) where Pro(X) and Pro(Y) are 4(R/S)-amino/guanidine proline have been synthesized and shown to form triplexes more stable than the unmodified collagen peptide [Pro-Hyp-Gly](6). The origin of hyperstability is due to conformational pre-organization of proline pucker arising from the electronegativity of the cationic group. These cationic collagen peptides are shown to be effective cell penetrating and plasmid DNA transfecting agents. The results have potential for design of new collagen mimetics for biomaterial applications and efficient cell penetrating agents for drug delivery applications.

}, keywords = {4-Aminoproline peptides, 4-Guanidino proline peptides, Cationic collagen mimetics, Cell penetrating peptides}, issn = {0009-4293}, doi = {10.2533/chimia.2012.936}, author = {Umashankara, M. and Nanda, Manaswini and Sonar, Mahesh and Ganesh, Krishna N.} } @article { ISI:000302982000044, title = {4(R/S)-Guanidinylprolyl collagen peptides: on-resin synthesis, complexation with plasmid DNA, and the role of peptides in enhancement of transfection}, journal = {Journal of Organic Chemistry}, volume = {77}, number = {8}, year = {2012}, month = {APR}, pages = {4131-4135}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Chimeric collagen peptides containing cationic 4(R/S)-guanidinylproline are synthesized by in situ amidinylation of 4(R/S)-aminoproline residues. These peptides uniquely enhance the transfection efficiency of GFP-encoded plasmid DNA (pRmHa3-GFP) into cells through efficient DNA condensation resulting from nonspecific electrostatic interactions of cationic guanidino groups and localize in subcytoplasmic organelles.

}, issn = {0022-3263}, doi = {10.1021/jo300070p}, author = {Nanda, Manaswini and Ganesh, Krishna N.} } @article {42779, title = {Amino functionalized oligo polyimides with enhanced storage stability}, number = {EP 11817412 A 20111228}, year = {2012}, month = {JUL}, abstract = {

The invention relates to an improved process for the preparation of amino functionalized oligomeric monomeric reactant type polyimides having higher stability. More particularly it relates to a process for the preparation of soluble imide prepolymers, used as matrix resins that can be rapidly cured with multi-functional moieties such as diepoxy, dicarboxyl, anhydride, diisocyanates to form crosslinked structures having enhanced thermal stability and mechanical strength.

}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Mohan, Srinivasulu Reddy Krishna and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Rajan, Chelanattukizhakkemadath Raman and Tayal, Rajiv Kumar and Shadbar, Qureshi Mohammed and Chavan, Nayaku and Deokar, Sarika Babasaheb and Mulani, Khudbudin Baban and Ghorpade, Ravindra V. and Bhongale, Sunil Sitaram and Nalawade, Archana Chetan and Sontakke, Kalpana Vishwanathrao and Bhosle, Sonali Madhavrao and Mule, Smita Atmaram and Dhoble, Deepa Arun and John, Aruldoss and Shaikh, Wasif Abdul Lateef and Harikrishna, Reghunathan and Punitharasu, Vellimala and Momin, Mohasin Shamshuddin} } @article { ISI:000307134700044, title = {Bistable dynamic coordination polymer showing reversible structural and functional transformations}, journal = {Inorganic Chemistry}, volume = {51}, number = {15}, year = {2012}, month = {AUG}, pages = {8317-8321}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A bistable dynamic coordination polymer [Ni(pca)(bdc)(0.5)(H2O)(2)] having a two-dimensional (2D) zigzag sheet structure is synthesized solvothermally. Topological analysis revealed that the frameworks have an hcb type of uninodal net. The compound exhibits guest specific reversible structural transformations accompanying reversible changes in physical properties driven by inherent flexibility and transformability.

}, issn = {0020-1669}, doi = {10.1021/ic301481p}, author = {Nagarkar, Sanjog S. and Das, Raja and Poddar, Pankaj and Ghosh, Sujit K.} } @article { ISI:000307537300043, title = {Characterization of a new bacillus cereus ATUAVP1846 strain producing penicillin V acylase, and optimization of fermentation parameters}, journal = {Annals of Microbiology}, volume = {62}, number = {3}, year = {2012}, month = {SEP}, pages = {1287-1293}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Penicillin acylases are involved chiefly in the industrial production of semisynthetic penicillins, which remain the most widely used group of antibiotics. We have isolated a new bacterial strain ATUAVP1846 that produces penicillin V acylase (PVA). Phylogenetic analysis using 16S rRNA sequencing showed 99.37\% homology with Bacillus cereus. Maximum PVA production was observed with B. cereus ATUAVP1846 at 30A degrees C, pH 7 after 24 h fermentation time under submerged conditions. Highest enzyme productivity was achieved using sucrose as carbon source, and tryptone and ammonium hydrogen phosphate as nitrogen sources. Minimal medium containing 0.4\% glucose and 0.3\% ammonium hydrogen phosphate was found to be optimal for maximum PVA production from B. cereus ATUAVP1846. The crude enzyme from B. cereus ATUAVP1846 was partially purified using ammonium sulfate fractionation and showed highest enzymatic activity in the hydrolysis of penicillin V at 40A degrees C and pH 6. The crude enzyme preparation also showed unique substrate specificity, preferring ampicillin and cephalexin over penicillin V.

}, keywords = {16S rRNA, Bacillus cereus, isolation, Ntn hydrolase, Optimization, Penicillin acylase}, issn = {1590-4261}, doi = {10.1007/s13213-011-0374-7}, author = {Sunder, Avinash Vellore and Kumar, Atul and Naik, Neha and Pundle, Archana V.} } @article {43321, title = {ChIP-Seq data analysis: identification of protein-DNA binding sites with SISSRs peak-finder}, journal = {Methods in molecular biology}, volume = {802}, year = {2012}, month = {JAN}, pages = {305-22}, abstract = {Protein-DNA interactions play key roles in determining gene-expression programs during cellular development and differentiation. Chromatin immunoprecipitation (ChIP) is the most widely used assay for probing such interactions. With recent advances in sequencing technology, ChIP-Seq, an approach that combines ChIP and next-generation parallel sequencing is fast becoming the method of choice for mapping protein-DNA interactions on a genome-wide scale. Here, we briefly review the ChIP-Seq approach for mapping protein-DNA interactions and describe the use of the SISSRs peak-finder, a software tool for precise identification of protein-DNA binding sites from sequencing data generated using ChIP-Seq.}, doi = {10.1007/978-1-61779-400-1_20}, author = {Narlikar, Leelavati and Jothi, Raja} } @article { ISI:000300490500018, title = {Clare: cracking the language of regulatory elements}, journal = {Bioinformatics}, volume = {28}, number = {4}, year = {2012}, month = {FEB}, pages = {581-583}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

CLARE is a computational method designed to reveal sequence encryption of tissue- specific regulatory elements. Starting with a set of regulatory elements known to be active in a particular tissue/process, it learns the sequence code of the input set and builds a predictive model from features specific to those elements. The resulting model can then be applied to user-supplied genomic regions to identify novel candidate regulatory elements. CLARE{\textquoteright}s model also provides a detailed analysis of transcription factors that most likely bind to the elements, making it an invaluable tool for understanding mechanisms of tissue- specific gene regulation.

}, issn = {1367-4803}, doi = {10.1093/bioinformatics/btr704}, author = {Taher, Leila and Narlikar, Leelavati and Ovcharenko, Ivan} } @article {43249, title = {Comparative genomics of the apicomplexan parasites toxoplasma gondii and neospora caninum: coccidia differing in host range and transmission strategy}, journal = {Plos Pathogens}, volume = {8}, year = {2012}, month = {MAR}, abstract = {Toxoplasma gondii is a zoonotic protozoan parasite which infects nearly one third of the human population and is found in an extraordinary range of vertebrate hosts. Its epidemiology depends heavily on horizontal transmission, especially between rodents and its definitive host, the cat. Neospora caninum is a recently discovered close relative of Toxoplasma, whose definitive host is the dog. Both species are tissue-dwelling Coccidia and members of the phylum Apicomplexa; they share many common features, but Neospora neither infects humans nor shares the same wide host range as Toxoplasma, rather it shows a striking preference for highly efficient vertical transmission in cattle. These species therefore provide a remarkable opportunity to investigate mechanisms of host restriction, transmission strategies, virulence and zoonotic potential. We sequenced the genome of N. caninum and transcriptomes of the invasive stage of both species, undertaking an extensive comparative genomics and transcriptomics analysis. We estimate that these organisms diverged from their common ancestor around 28 million years ago and find that both genomes and gene expression are remarkably conserved. However, in N. caninum we identified an unexpected expansion of surface antigen gene families and the divergence of secreted virulence factors, including rhoptry kinases. Specifically we show that the rhoptry kinase ROP18 is pseudogenised in N. caninum and that, as a possible consequence, Neospora is unable to phosphorylate host immunity-related GTPases, as Toxoplasma does. This defense strategy is thought to be key to virulence in Toxoplasma. We conclude that the ecological niches occupied by these species are influenced by a relatively small number of gene products which operate at the host-parasite interface and that the dominance of vertical transmission in N. caninum may be associated with the evolution of reduced virulence in this species.}, doi = {10.1371/journal.ppat.1002567}, author = {Reid, Adam James and Vermont, Sarah J. and Cotton, James A. and Harris, David and Hill-Cawthorne, Grant A. and Koenen-Waisman, Stephanie and Latham, Sophia M. and Mourier, Tobias and Norton, Rebecca and Quail, Michael A. and Sanders, Mandy and Shanmugam, Dhanasekaran and Sohal, Amandeep and Wasmuth, James D. and Brunk, Brian and Grigg, Michael E. and Howard, Jonathan C. and Parkinson, John and Roos, David S. and Trees, Alexander J. and Berriman, Matthew and Pain, Arnab and Wastling, Jonathan M.} } @article { ISI:000303281500046, title = {Confinement of zinc oxide nanoparticles in ordered mesoporous silica MCM-41}, journal = {Materials Chemistry and Physics}, volume = {133}, number = {2-3}, year = {2012}, month = {APR}, pages = {850-856}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Mesoporous silica (MS) and zinc loaded MS composites have been synthesized and characterized using high resolution transmission electron microscopy, X-ray diffraction, UV-visible spectroscopy, photoluminescence spectroscopy, N-2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Thermal treatment of the zinc loaded MS composite lead to the formation of ZnO-MS composite. The well ordered uniform pore structure of MS (pore size similar to 3.4 nm) is found to remain stable even after 30\% Zn loading albeit decrease in the pore size 1.2 nm indicates the formation of ZnO inside the pores. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Defect, Energy spectroscopy for chemical analysis (ESCA), Mesoporous, Photoluminescence spectroscopy, Surface properties}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2012.01.106}, author = {Lihitkar, P. B. and Violet, Samuel and Shirolkar, Mandar and Singh, Jai and Srivastava, O. N. and Naik, R. H. and Kulkarni, S. K.} } @article { ISI:000303951600008, title = {Controlled synthesis of O-glycopolypeptide polymers and their molecular recognition by lectins}, journal = {Biomacromolecules}, volume = {13}, number = {5}, year = {2012}, month = {MAY}, pages = {1287-1295}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The facile synthesis of high molecular weight water-soluble O-glycopolypeptide polymers by the ring-opening polymerization of their corresponding N-carboxyanhydride (NCA) in very high yield (overall yield \> 70\%) is reported. The per-acetylated-O-glycosylated lysine-NCA monomers, synthesized using stable glycosyl donors and a commercially available protected amino acid in very high yield, was polymerized using commercially available amine initiators. The synthesized water-soluble glycopolypeptides were found to be alpha-helical in aqueous solution. However, we were able to control the secondary conformation of the glycopolypeptides (alpha-helix vs nonhelical structures) by polymerizing raceznic amino acid glyco NCAs. We have also investigated the binding of the glycopolypeptide poly(alpha-manno-O-lys) with the lectin Con-A using precipitation and hemagglutination assays as well as by isothermal titration calorimetry (ITC). The ITC results clearly show that the binding process is enthalpy driven for both alpha-helical and nonhelical structures, with negative entropic contribution. Binding stoichiometry for the glycopolypeptide poly(alpha-manno-O-lys) having a nonhelical structure was slightly higher as compared to the corresponding polypeptide which adopted an alpha-helical structure.

}, issn = {1525-7797}, doi = {10.1021/bm201813s}, author = {Pati, Debasis and Shaikh, Ashif Y. and Das, Soumen and Nareddy, Pavan Kumar and Swamy, Musti J. and Hotha, Srinivas and Sen Gupta, Sayam} } @article { ISI:000306358100005, title = {Copper modified waste fly ash as a promising catalyst for glycerol hydrogenolysis}, journal = {Catalysis Today}, volume = {190}, number = {1}, year = {2012}, month = {AUG}, pages = {31-37}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Several catalyst formulations using waste fly ash along with Cu were prepared and characterised by XRD, BET and TEM. These catalysts were also evaluated for the first time for hydrogenolysis of glycerol to 1,2 propanediol (1,2-PDO) in a batch reactor under 52 bar H-2 pressure in the temperature range of 473-513 K conditions. The fly ash pretreated by alkali using the fusion method and impregnated with Cu showed higher activity and stability for glycerol hydrogenolysis. Due to pretreatment with alkali at high temperature, transformation of alpha-quartz to the tridymite phase of SiO2 occurred. More importantly, use of alkali either during the pretreatment or the Cu loading step resulted in a high dispersion on the surface which was responsible for higher glycerol conversion and 1,2-PDO selectivity. The effects of temperature, Cu loading and solvent on glycerol conversion and product selectivities were also studied in this work. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {1, 2-Propanediol, Alkali fusion, Cu loading, Fly ash, Glycerol hydrogenolysis}, issn = {0920-5861}, doi = {10.1016/j.cattod.2011.11.038}, author = {Rode, C. V. and Mane, R. B. and Potdar, A. S. and Patil, P. B. and Niphadkar, P. S. and Joshi, P. N.} } @article { ISI:000309372100015, title = {Critical review of membrane bioreactor models - Part 2: Hydrodynamic and integrated models}, journal = {Bioresource Technology}, volume = {122}, number = {SI}, year = {2012}, month = {OCT}, pages = {107-118}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can heavily benefit from mathematical modelling. In this paper, the vast literature on hydrodynamic and integrated MBR modelling is critically reviewed. Hydrodynamic models are used at different scales and focus mainly on fouling and only little on system design/optimisation. Integrated models also focus on fouling although the ones including costs are leaning towards optimisation. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {CFD, Costs, hydrodynamics, Integrated model, Modelling}, issn = {0960-8524}, doi = {10.1016/j.biortech.2012.05.071}, author = {Naessens, W. and Maere, T. and Ratkovich, N. and Vedantam, S. and Nopens, I.} } @article { ISI:000308285100046, title = {Deposition-precipitation versus anionic-exchange Au/Al2O3 catalysts: a comparative investigation towards the selective reduction of NOx}, journal = {Catalysis Communications}, volume = {26}, year = {2012}, month = {SEP}, pages = {225-230}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Catalytic properties of supported gold catalysts on gamma-Al2O3 prepared by a conventional deposition-precipitation method were compared with those obtained by anionic-exchange for the reduction of NOx by hydrocarbon under lean conditions that simulate Diesel engine exhaust gas. Interestingly, a catalytic activity enhancement is observed after thermal ageing under reactive conditions at 500 degrees C on anionic-exchanged samples which make them suitable for practical developments. On the other hand, the reverse trend is observed on the solids prepared by deposition-precipitation which deactivate at low temperature. Such changes in catalytic properties have been tentatively explained on the basis of textural and structural modifications taking place during thermal ageing under wet atmosphere. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Anionic-exchange, Au catalyst, Deposition-precipitation, NOx abatement, Selective catalytic reduction}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.06.004}, author = {Nguyen, D. L. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Lancelot, Christine and Girardon, J. S. and Dujardin, Christophe and Granger, P.} } @article { ISI:000309139400021, title = {Eco-friendly, highly stable and efficient nanostructured p-type N-doped ZnO photocatalyst for environmentally benign solar hydrogen production}, journal = {Green Chemistry}, volume = {14}, number = {10}, year = {2012}, month = {JUL}, pages = {2790-2798}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We have investigated an economical green route for the synthesis of a p-type N-doped ZnO photocatalyst by a wet chemical method. Significantly, hazardous H2S waste was converted into eco-friendly hydrogen energy using the p-type N-doped ZnO photocatalyst under solar light, which has previously been unattempted. The as-synthesized p-type N-doped ZnO shows a hexagonal wurtzite structure. The optical study shows a drastic shift in the band gap of the doped ZnO in the visible region (3.19-2.3 eV). The doping of nitrogen into the ZnO lattice is conclusively proved from X-ray photoelectron spectroscopy analysis and Raman scattering. The morphological features of the N-doped ZnO are studied from FESEM, TEM and reveal particle sizes to be in the range of similar to 4-5 nm. The N-doped ZnO exhibits enhanced photocatalytic hydrogen generation (similar to 3957 mu mol h(-1)) by photodecomposition of hydrogen sulfide under visible light irradiation, which is much higher as compared to semiconductor metal oxides reported so far. It is noteworthy that a green catalyst is investigated to curtail H2S pollution along with production of hydrogen (green fuel) using solar light, i.e., a renewable energy source. The green process investigated will have the potential to synthesize other N-doped metal oxides.

}, issn = {1463-9262}, doi = {10.1039/c2gc35519a}, author = {Bhirud, Ashwini P. and Sathaye, Shivaram D. and Waichal, Rupali P. and Nikam, Latesh K. and Kale, Bharat B.} } @article { ISI:000311350000043, title = {Effect of preparation parameters of Cu catalysts on their physico-chemical properties and activities for glycerol hydrogenolysis}, journal = {Catalysis Today}, volume = {198}, number = {1, SI}, year = {2012}, month = {DEC}, pages = {321-329}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Cu based catalysts were prepared by co-precipitation, alkali fusion followed by precipitation and direct solid state fusion methods. The changes in the phase formation, morphology, crystallite size, extent of aggregation, strength and nature of acid sites were observed due to variations in precipitating agents and also their order of addition. The catalyst prepared by co-precipitation using Na2CO3 showed the predominant presence of metallic Cu phase with a crystallite size of 5 nm, well segregated spherical morphology and highest acidity in the activated sample. These intrinsic properties contributed to achieve the highest glycerol conversion of 62\% and 1,2-PDO selectivity of 88\% in glycerol hydrogenolysis. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Co-precipitation, Cu catalysts, Glycerol hydrogenolysis, Physico-chemical properties, Solid state fusion}, issn = {0920-5861}, doi = {10.1016/j.cattod.2012.05.051}, author = {Mane, R. B. and Kondawar, S. E. and Niphadkar, P. S. and Joshi, P. N. and Patil, K. R. and Rode, C. V.} } @article { ISI:000300635600002, title = {Effects of arsenite stress on growth and proteome of Klebsiella pneumoniae}, journal = {Journal of Biotechnology}, volume = {158}, number = {1-2}, year = {2012}, month = {MAR}, pages = {8-16}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In the present study an arsenite, As(III), tolerating bacterium, MR4, was isolated from Mulla River Pune, India, capable of reducing arsenate to arsenite and identified as Klebsiella pneumoniae (HQ857583). Comparative proteomic analysis using two-dimensional gel electrophoresis (2-DGE) and matrix assisted laser desorption ionization-time of flight-time of flight (MALDI-TOF/ TOF) was used to monitor the proteins undergoing changes in expression levels under 2.5 mM As(III) stress. The 2-DGE proteome map has shown that 60 proteins were differentially expressed under As(III) stress, of which 39 proteins were successfully identified with a MASCOT score greater than 70 (p \< 0.05). Among the identified proteins, membrane transport/ binding proteins, porins, and amino acid metabolism enzymes were down-regulated while stress responsive proteins and antioxidant enzymes were up-regulated. Proteins involved in carbohydrate metabolism, particularly those in pentose phosphate pathway were also up-regulated while those involved in pyruvate metabolism were down-regulated. However, proteins involved in glycolysis and tricarboxylic acid cycle showed a mixed regulation response. These findings provide new insights into the probable mechanisms by which K. pneumoniae (HQ857583) could be adapting to As(III) stress. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {(2-DGE), Arsenite stress, Klebsiella pneumoniae, MALDI-TOF-TOF, Two dimensional gel electrophoresis}, issn = {0168-1656}, doi = {10.1016/j.jbiotec.2011.12.013}, author = {Daware, Vandana and Kesavan, Suresh K. and Patil, Rajendra and Natu, Arvind and Kumar, Ameeta and Kulkarni, Mahesh J. and Gade, Wasudeo N.} } @article { ISI:000306768600002, title = {Electrospinning of PHBV/ZnO membranes: structure and properties}, journal = {Fibers and Polymers}, volume = {13}, number = {6}, year = {2012}, month = {JUL}, pages = {692-697}, publisher = {KOREAN FIBER SOC}, address = {KOREA SCIENCE TECHNOLOGY CTR \#501 635-4 YEOGSAM-DONG, KANGNAM-GU, SEOUL 135-703, SOUTH KOREA}, abstract = {

Polyhydroxy butyrate-co-valerate (PHBV) - Zinc oxide (ZnO) nano composite fibers were prepared using electrospinning. The structural and optical properties were studied using Fourier transform infrared spectroscopy (FT-ER), X-ray diffraction (XRD) and photoluminescence study (PL). The morphology observed with scanning electron microscope (SEM) revealed no significant changes in the nano composite fibers as compared to bare polymer. The low concentration of ZnO nanoparticles resulted in an increase in overall crystallinity of the polymer matrix which was confirmed from FT-IR and XRD results. The photoluminescence (PL) study indicated the quenching of visible emission in the composite fibers. The ratio of UV to visible emission (I-uv/I-vis) intensity was found to be 12.8 times enhanced in the composite fibers compared to bare ZnO nanoparticles. The nanofibrous mats are self supported and hence offer potential applications in optoelectronic devices and the biomedical imaging.

}, keywords = {Biomarkers, Biopolymers, electrospinning, ZnO nanoparticles}, issn = {1229-9197}, doi = {10.1007/s12221-012-0692-9}, author = {Naphade, Rounak and Jog, Jyoti Prakash} } @article { ISI:000308331200002, title = {Enhanced tolerance of transgenic grapevines expressing chitinase and beta-1,3-glucanase genes to downy mildew}, journal = {Plant Cell Tissue and Organ Culture}, volume = {111}, number = {1}, year = {2012}, month = {OCT}, pages = {15-28}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

An Agrobacterium-mediated transformation protocol for grapevine cv. Crimson Seedless using sonication and anti-necrotic agents has been optimized, and transgenic lines carrying wheat chitinase and beta-1,3-glucanase genes have exhibited enhanced tolerance to downy mildew incited by Plasmopara viticola. cDNA clones encoding chitinase and beta-1,3-glucanase have been isolated from a cDNA library, constructed from scab-infected Sumai-3 wheat, and introduced into a plant cloning vector to generate the plasmids pCAMBAR.chi.11 and pCAMBAR.638. Embryogenic cultures, established from in vitro-derived leaves, of Crimson Seedless were used as explants for Agrobacterium tumefaciens-mediated transformation studies. Sonication of somatic embryos in a bacterial suspension of A. tumefaciens and incorporation of anti-necrotic agents in the co-cultivation medium significantly enhanced transformation efficiency. Transformation efficiency of embryos with either chitinase or beta-1,3-glucanase gene was highest when embryos were suspended in a bacterial cell suspension at 0.5 OD600 and sonicated for 2 or 3 s at 60 kHz. Transformation efficiency with chitinase was highest on incorporation of 2 or 3 mg l(-1) phenylalanine, 1 or 2 mg l(-1) silver nitrate or 400 mg l(-1) l-cysteine in co-cultivation medium while incorporation of 20 mg l(-1) sodium thiosulphate produced highest transformation efficiency with beta-1,3-glucanase. Confirmed transgenic grapevine lines harboring anti-fungal genes exhibited higher levels of chitinase and beta-1,3-glucanase transcripts as well as enzymatic activities. Moreover, transgenic lines showed enhanced tolerance to P. viticola infection following detached leaf assays.

}, keywords = {Agrobacterium tumefaciens, Anti-oxidants, Downy mildew tolerance, Grapevine, Sonication}, issn = {0167-6857}, doi = {10.1007/s11240-012-0166-1}, author = {Nookaraju, Akula and Agrawal, Dinesh C.} } @article {42649, title = {Environmental pollution reduction in cement industry for cocombustion of waste tyre and coal as a fuel}, journal = {International Journal of Modern Engineering Research }, volume = {2}, year = {2012}, month = {DEC}, pages = {4652-4656}, abstract = {

In recent years, there are several problems encountered in waste management system particularly waste tyre as well as coals. The energy generation on incineration provides large amount of polycyclic aromatic hydrocarbon (PAH) emissions which is the cause of major environmental threat. Therefore, the combustion of coal and tyre were carried out in cement industry in order to generate heat energy at 1300oC and the only remaining residue (steel powder) to enhance the strength of the cement. At the outset, the particle size of coal and tyre was cut into 63-75 and 180-212 {\textmu}m respectively. Combustion experiments were conducted using Nelson reactor under controlled conditions in presence of air and also in presence of nitrogen gas (INOX) atmosphere. The temperature range was varied from 300-13000C and several fuel mass loading in the furnace, expressed in terms of bulk equivalence ratios in the range of 0.7-2.4. At fixed bulk equivalence ratios, as the furnace gas (Air) temperature increased the polycyclic aromatic hydrocarbon yields from both fuels decreased drastically, while the CO2 yields increased. At the highest temperature around 13000C, the effluent of combustion of both (coal and tyre) fuels was practically devoid of polycyclic aromatic hydrocarbon (PAH) (at a detection limit of 0.3 {\textmu}g of a PAH component/g of fuel burnt). In order to understand the rate of thermal effect and morphology of co combustion material (coal and tyre), the preliminary results are very essential to explore. Therefore, the thermo gravimetric analysis (TGA) and environmental scanning electron microscopy (ESEM) were carried out and results of coal and tyre mixture at various temperature conditions will be highlighted.

}, author = {Patil, R. K. and Garnaik, Baijayantimala and Khond, M. P. and Nawale, L. G.} } @article {42782, title = {Ethyl oligo-silicates with strong acid heterogeneous polymeric catalysts}, number = {PCT/IB2011/002531}, year = {2012}, month = {MAY}, type = {Application}, abstract = {

The present invention provides a process for the synthesis of ethyl silicate with varying silica concentration, by hydrolysing ethyl silicate in varying water concentration in the presence of sulfonated catalysts having a styrene-divinyl benzene backbone. The present invention further relates to the preparation of beaded crosslinked polymers containing sulfonic acid moieties having an interconnected pore structure and surface area up to 400 m2 /g.

}, author = {Bevara, Madhusudana Rao and Bhongale, Sunil Sitaram and Bhosle, Sonali Madhavrao and Chavan, Nayaku and Chelanattukizhakkemadath, Raman Rajan and Deokar, Sarika Babasaheb and Dhoble, Deepa Arun and Dwivedi, Mayank and Ghorpade, Ravindra V. and Harikrishna, Reghunathan and Dhanasekharan, Janakiraman and John, Aruldoss and Locanindi, Hari Sarvothama Rao and Momin, Mohasin Shamshuddin and Mulani, Khudbudin Baban and Mule, Smita Atmaram and Nalawade, Archana Chetan and Punitharasu, Vellimalai and Qureshi, Mohammed Shadbar and Kumar, Tayal Rajiv and Shaikh, Wasif Abdul Lateef and Sontakke, Kalpana Vishwanathrao and Reddy, Krishna Mohan Srinivasulu and Sriperambudur, Rajesh Kumar and Ponrathnam, Surendra} } @article { ISI:000312145400009, title = {First total synthesis of seimatopolide B}, journal = {RSC Advances}, volume = {2}, number = {30}, year = {2012}, month = {OCT}, pages = {11231-11234}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The first enantioselective total synthesis of seimatopolide B has been achieved, using ring-closing metathesis and DCC (N,N{\textquoteright}-dicyclohexylcarbodiimide) coupling as key steps. The stereogenic centres were generated by means of iterative hydrolytic kinetic resolution (HKR) of racemic epoxides.

}, issn = {2046-2069}, doi = {10.1039/c2ra21838k}, author = {Nookaraju, U. and Harbindu, Anand and Bhise, Ankushkumar D. and Sharma, Brijesh M. and Kumar, Pradeep} } @article { ISI:000312111500001, title = {Fluorescent superparamagnetic iron oxide core-shell nanoprobes for multimodal cellular imaging}, journal = {Materials Express}, volume = {2}, number = {4}, year = {2012}, month = {DEC}, pages = {265-274}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Multimodal imaging agents that combine magnetic and fluorescent imaging capabilities are desirable for the high spatial and temporal resolution. In the present work, we report the synthesis of multifunctional fluorescent ferrofluids using iron oxide as the magnetic core and rhodamine B as fluorochrome shell. The core-shell structure was designed in such a way that fluorescence quenching due to the inner magnetic core was minimized by an intermediate layer of silica. The intermediate passive layer of silica was realized by a novel method which involves the esterification reaction between the epoxy group of prehydrolysed 3-Glyidoxypropyltrimethoxysilane and the surfactant over iron oxide. The as-synthesized ferrofluids have a high saturation magnetization in the range of 62-65 emu/g and were found to emit light of wavelength 640 nm (lambda(excitation) = 446 nm). Time resolved life time decay analysis showed a bi-exponential decay pattern with an increase in the decay life time in the presence of intermediate silica layer. Cytotoxicity studies confirmed the cell viability of these materials. The in vitro MRI imaging illustrated a high contrast when these multimodal nano probes were employed and the R2 relaxivity of these sample was found to be 334 mM(-1)s(-1) which reveals its high potential as a T2 contrast enhancing agent.

}, keywords = {GPTMS, MRI Imaging, Multimodal Imaging, SPION, T2 Contrast Agent}, issn = {2158-5849}, doi = {10.1166/mex.2012.1083}, author = {Smitha, Sasidharan and Haseena, Vadakkenchery S. and Narayanan, Tharangattu N. and Mary, Antony P. Reena and Ajayan, Pulickel M. and Puthumana, Jayesh and Aziz, Anas A. and Aburto, Rebeca R. and Mani, Sendurai A. and Joy, Pattayil Alias and Anantharaman, Maliemadom R.} } @article { ISI:000301016800041, title = {Genetic homogeneity of in vitro raised plants of grapevine cv. crimson seedless revealed by ISSR and microsatellite markers}, journal = {South African Journal of Botany}, volume = {78}, year = {2012}, month = {JAN}, pages = {302-306}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The present study was conducted to test the clonal homogeneity of six month old tissue culture raised plants of grapevine cv. Crimson Seedless using Inter Simple Sequence Repeat (ISSR) and Simple Sequence Repeat (SSR) markers. Visible assessment of these in vitro raised plants maintained in polyhouse did not show any morphological differences among themselves. However, to test the genetic homogeneity of these plants, we screened 50 ISSR primers out of which, 22 primers produced scorable and repeatable bands. These 22 primers were used further for assessing genetic homogeneity of in vitro raised plants of Crimson Seedless. These 22 ISSR primers generated 134 distinct band classes with a total of 3216 scorable bands. All the primers showed uniform banding pattern for all the in vitro raised plants and the mother plant. In case of 5 SSR primers (VS I, VVMD5, VVS2, VMCNG4c8 and VVMD31) used, a total of 288 scorable bands were obtained. The allele sizes ranged from 98 to 254 bp. Allelic composition of 23 in vitro raised plants and the mother plant at 5 SSR loci did not show any polymorphism. The results of the two marker systems in the present study revealed the genetic uniformity among the in vitro raised plants demonstrating the reliability of in vitro propagation system used for the cultivar. (C) 2011 SAAB. Published by Elsevier B.V. All rights reserved.

}, keywords = {Allele composition, Clonal fidelity, Inter Simple Sequence Repeats, Monomorphic bands, Tissue culture, Vitis vinifera L.}, issn = {0254-6299}, doi = {10.1016/j.sajb.2011.08.009}, author = {Nookaraju, A. and Agrawal, Dinesh C.} } @article { ISI:000303362900001, title = {Highly efficient (R-X-R)-type carbamates as molecular transporters for cellular delivery}, journal = {Journal of the American Chemical Society}, volume = {134}, number = {17}, year = {2012}, month = {MAY}, pages = {7196-7199}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The (R-X-R) motif-containing arginine-rich peptides are among the most effective cell-penetrating peptides. The replacement of amide linkages in the (R-X-R) motif by carbamate linkages as in (r-ahx-r)(4) or (r-ahx-r-r-apr-r)(2) increases the efficacy of such oligomers several-fold. Internalization of these oligomers in mammalian cell lines occurs by an energy-independent process. These oligomers show efficient delivery of biologically active plasmid DNA into CHO-K1 cells.

}, issn = {0002-7863}, doi = {10.1021/ja210026m}, author = {Patil, Kiran M. and Naik, Rangeetha J. and Rajpal and Fernandes, Moneesha and Ganguli, Munia and Kumar, Vaijayanti A.} } @article { ISI:000312434600010, title = {Hydrodynamics of liquid-liquid dispersion in an advanced-flow reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {51}, number = {50}, year = {2012}, month = {DEC}, pages = {16251-16262}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydrodynamics and mass transfer of immiscible liquid-liquid flows are explored in an Advanced-Flow Reactor (AFR). These systems are emerging as one of the major commercial systems for small scale continuous flow chemistry, and characterization of the transport phenomena is critical for reaction implementation. With hexane/water as a model system, we use flow visualization techniques to determine drop size distribution, hexane holdup, and specific interfacial areas for a phase flow rate range of 10-80 mL/min. The complex geometry of the AFR with its continuously changing cross section along the flow path and strategically placed obstacles creates pressure changes that cause drop breakup and enhance mass transfer. Observations show that a wide range of average drop size (0.33-1.3 mm) can be achieved in the AFR depending upon the inlet flow rates and inlet composition. Pressure drop measurements are performed to estimate the power consumption and are used to compare the efficiency of AFR with conventional liquid-liquid contactors. The analysis shows that, similar to microreactors, the AFR can provide specific interfacial areas (1000-10 000 m(-1)) and overall mass transfer coefficients (1.9-41 s(-1)) a few orders of magnitude larger than conventional stirred tank reactors and also the static mixers.

}, issn = {0888-5885}, doi = {10.1021/ie301821k}, author = {Nieves-Remacha, Maria Jose and Kulkarni, Amol A. and Jensen, Klavs F.} } @article { ISI:000307479100016, title = {Lamellar melting, not crystal motion, results in softening of polyoxymethylene on heating}, journal = {Macromolecules}, volume = {45}, number = {15}, year = {2012}, month = {AUG}, pages = {5967-5978}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We probe temperature-dependent changes in the semicrystalline microstructure of polyoxymethylene using a combination of modulated DSC, SAXS, and solid-state NMR to characterize macroscopic behavior, lamellar-level structure, and molecular environments, respectively, and correlate these with the change in mechanical properties probed using DMA and AFM. Two model samples are investigated: a melt crystallized sample prepared by injection molding and a sample obtained by crystallization from dilute solution. Our investigations reveal that, for both samples, there is an increase in crystalline motions and in the amorphous content on heating. DMA and AFM measurements reveal that the modulus of the molded sample decreases on heating to about 100 degrees C; however, there is a significant difference in behavior of the solution crystals, where we observe no significant decrease in stiffness (from AFM measurements). Thus, in contrast to previous reports, we demonstrate that the decrease in modulus on heating polyoxymethylene does not correlate with chain motions in the crystalline regions. We use SAXS to probe the semicrystalline morphology for the samples on heating and show that, for the molded sample, there is a distribution of lamellar thickness at room temperature and that the thin lamellae in this distribution melt on heating. In contrast to the behavior of the melt crystallized samples, the solution crystals exhibit no change in the lamellar stacking on heating to 150 degrees C. We also demonstrate that, on heating, the amorphous regions in the solution crystals always appear to have restricted mobility while there are mobile and low mobility amorphous regions in the molded samples. Our results suggest that, contrary to conventional belief, the decrease in modulus on heating polyoxymethylene arises not from motions in the crystalline lamellae but primarily from melting of thin lamellae.

}, issn = {0024-9297}, doi = {10.1021/ma3004423}, author = {Kumaraswamy, Guruswamy and Surve, Nikita S. and Mathew, Renny and Rana, Abhimanyu and Jha, Saroj K. and Bulakh, Neelima N. and Nisal, Anuya and Ajithkumar, Thalasseril G. and Rajamohanan, P. R. and Ratnagiri, Ram} } @article { ISI:000311111300007, title = {Lipase-mediated hydrolysis of flax seed oil for selective enrichment of alpha-linolenic acid}, journal = {European Journal of Lipid Science and Technology}, volume = {114}, number = {11}, year = {2012}, month = {NOV}, pages = {1246-1253}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Polyunsaturated fatty acids (PUFA) are important ingredients of human diet because of their prominent role in the function of human brain, eye and kidney. alpha-Linolenic acid (ALA), a C18, n-3 PUFA is a precursor of long chain PUFA in humans. Commercial lipases of Candida rugosa, Pseudomonas cepacea, Pseudomonas fluorescens, and Rhizomucor miehei were used for hydrolysis of flax seed oil. Reversed phase high performance liquid chromatography followed by gas chromatography showed that the purified oil contained 12 triacylglycerols (TAGs) with differences in fatty acid compositions. Flax seed oil TAGs contained alpha-linolenic acid (50\%) as a major fatty acid while palmitic, oleic, linoleic made up rest of the portion. Among the four commercial lipases C. rugosa has preference for ALA, and that ALA was enriched in free fatty acids. C. rugosa lipase mediated hydrolysis of the TAGs resulted in a fatty acid mixture that was enriched in alpha-linolenic to about 72\% yield that could be further enriched to 80\% yield by selective removal of saturated fatty acids by urea complexation. Such purified ALA can be used for preparation of ALA-enriched glycerides. Practical applications: This methodology allows purifying ALA from fatty acid mixture obtained from flax seed oil by urea complexation.

}, keywords = {a-Linolenic acid, Flax seed oil, Lipases, PUFA, Urea complexation}, issn = {1438-7697}, doi = {10.1002/ejlt.201100384}, author = {Rupani, Banin and Kodam, Kisan M. and Gadre, Ramchandra V. and Najafpour, Ghasem D.} } @article { ISI:000313404400021, title = {Magnetic properties of nanocrystalline CoFe2O4 synthesized by thermal plasma in large scale}, journal = {Materials Chemistry and Physics}, volume = {137}, number = {2}, year = {2012}, month = {DEC}, pages = {586-595}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The paper reports the large scale synthesis of nanoparticles of CoFe2O4 using thermal plasma reactor by gas phase condensation method. The yield of formation was found to be around 15 g h(-1). The magnetic properties of CoFe2O4, synthesized at different reactor powers, were investigated in view of studying the effect of operating parameters of plasma reactor on the structural reorganization leading to the different cation distribution. The values of saturation magnetization, coercivity and remanent magnetization were found to be influenced by input power in thermal plasma. Although the increase in saturation magnetization was marginal (61 emu g(-1) to 70 emu g(-1)) with increasing plasma power; a significant increase in the coercivity (552 Oe to 849 Oe) and remanent magnetization (16 emu g(-1) to 26 emu g(-1)) were also noticed. The Mossbauer spectra showed mixed spinel structure and canted spin order for the as synthesized nanoparticles. The detailed analysis of cation distribution using the Mossbauer spectroscopy and X-ray photoelectron spectroscopy leads to the conclusion that the sample synthesized at an optimized power shows the different site selective states. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Magnetic materials, magnetic properties, Mossbauer spectroscopy, Nanostructures}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2012.10.007}, author = {Nawale, A. B. and Kanhe, Nilesh S. and Patil, K. R. and Reddy, V. R. and Gupta, A. and Kale, B. B. and Bhoraskar, S. V. and Mathe, Vikas L. and Das, A. K.} } @article { ISI:000302350300092, title = {Molecular simulations of the conformational properties of atactic poly(2-ethylbutyl methacrylate)}, journal = {Journal of Applied Polymer Science}, volume = {125}, number = {2}, year = {2012}, month = {JUL}, pages = {1586-1591}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

RIS Metropolis Monte Carlo (RMMC) simulations were used to determine the unperturbed theta-state chain dimensions of atactic stereoconfigurations of poly (2-ethylbutyl methacrylate) [PEBMA]. Root mean-squared end-to-end distance (\< r(2)\>(o)/M)(1/2) and characteristic ratio (Cn) were calculated along with the backbone torsion angle distribution. The simulated properties are in very good agreement with experimental results. The values of the PEBMA chain dimensions are in-between those corresponding ones for poly(n-butyl methacrylate) and poly (n-hexyl methacrylate) thereby showing the effect of branching in the side-chain. (c) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

}, keywords = {chain dimensions, conformations, Monte Carlo simulation, poly(2-ethylbutyl methacrylate), vinyl polymer}, issn = {0021-8995}, doi = {10.1002/app.35119}, author = {Karyappa, Rahul B. and Natarajan, Upendra} } @article { ISI:000300859000006, title = {Nanowires of silver-polyaniline nanocomposite synthesized via in situ polymerization and its novel functionality as an antibacterial agent}, journal = {Colloids and Surfaces B-Biointerfaces}, volume = {92}, year = {2012}, month = {APR}, pages = {35-41}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Silver-polyaniline (Ag-PANI) nanocomposite was synthesized by in situ polymerization method using ammonium persulfate CAPS) as an oxidizing agent in the presence of dodecylbenzene sulfonic acid (DBSA) and silver nitrate (AgNO3). The as synthesized Ag-PANI nanocomposite was characterized by using different analytical techniques such as UV-visible (UV-vis) and Fourier transform Infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), thermo gravimetric analysis (TGA). X-ray diffraction (XRD), and transmission electron microscopy (TEM). UV-visible spectra of the synthesized nanocomposite showed a sharp peak at similar to 420 nm corresponding to the surface plasmon resonance (SPR) of the silver nanoparticles (AgNPs) embedded in the polymer matrix which is overlapped by the polaronic peak of polyaniline appearing at that wavelength. Nanowires of Ag-PANI nanocomposite with diameter 50-70 nm were observed in FE-SEM and TEM. TGA has indicated an enhanced thermal stability of nanocomposite as compared to that of pure polymer. The Ag-PANI nanocomposite has shown an antibacterial activity against model organisms, a gram positive Bacillus subtilis NCIM 6633 in Mueller-Hinton (MH) medium, which is hitherto unattempted. The Ag-PANI nanocomposite with monodispersed AgNPs is considered to have potential applications in sensors, catalysis, batteries and electronic devices. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {antibacterial activity, Conducting poly(aniline), In situ polymerization, Nanocomposite}, issn = {0927-7765}, doi = {10.1016/j.colsurfb.2011.11.006}, author = {Tamboli, Mohaseen S. and Kulkarni, Milind V. and Patil, Rajendra H. and Gade, Wasudeo N. and Navale, Shalaka C. and Kale, Bharat B.} } @conference {42775, title = {Non-isothermal kinetics of free-redical polymerization of 2-phenyl ethyl acrylate, paper presented at ?third international multicomponent polymer conference? impc 2012}, booktitle = {Third International Multicomponent Polymer Conference IMPC 2012, Kottayam, India.}, year = {2012}, month = {JAN}, address = {Kottayam, India.}, author = {Ghorpade, Ravindra V. and Rajdeo, K. S. and Ponrathnam S. and Chavan N. N.} } @article { ISI:000307814000728, title = {Novel mechanism involved in temporal regulation of skin pigmentation homeostasis}, journal = {Journal of Investigative Dermatology}, volume = {132}, number = {2}, year = {2012}, note = {42nd Annual Meeting of the European-Society-for-Dermatological-Research (ESDR), Venice, ITALY, SEP 07-10, 2012}, month = {SEP}, pages = {S128}, publisher = {European Soc Dermatol Res (ESDR)}, address = {75 VARICK ST, 9TH FLR, NEW YORK, NY 10013-1917 USA}, issn = {0022-202X}, author = {Ganju, Parul and Natarajan, V. T. and Singh, A. and Vijayan, V. and Dani, Prachi P. and Kar, H. K. and Natarajan, K. and Gadgil, Chetan J. and Rani, R. and Gokhale, R. S.} } @article {42644, title = {Novel solid cloisite tin catalyzed polymerization of L-lactide}, journal = {Journal of Chemistry and Chemical Engineering}, volume = {6}, year = {2012}, month = {JAN}, pages = { 54-60 }, abstract = {

A novel cloisite modified solid catalyst was prepared in a single step from commercially available starting materials for the first time. The ring opening polymerization of L-lactide and D-lactide using this cloisite modified solid catalyst resulted in homopolymers of 75,000 and PDI = 1.6 and the maximum molecular weight (Mw) i.e. 180,000 with PDI = 1.9 were obtained. The catalytic activity of cloisite modified solid catalyst was compared with the conventional stannous octoate catalyst and found superior to stannous octoate in all respect such as conversion, molecular weight and molecular weight distribution etc.. Moreover, the maximum molecular weight i.e. 180,000was obtained at 220 o C, whereas, transesterification reaction predominate in presence of stannous octoate. The linear structure was confirmed by quantitative 13C NMR Spectroscopy. Blend films were obtained by casting mixed solutions of poly (D-lactide) and poly (L lactide) at various compositions, and stereocomplex was formed at 50/50 composition with molecular weight of 75,000.

}, author = {Selukar, Balaji Sidram and Pandey, Asutosh Kumar and Nande, Smita Sunil and Bansode, Avinash Santram and Garnaik, Baijayantimala} } @article { ISI:000311698800036, title = {One-pot sol-gel preparation for efficient cobalt-molybdenum-titania hydrotreating catalysts}, journal = {Chemcatchem}, volume = {4}, number = {12}, year = {2012}, month = {DEC}, pages = {2112-2120}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Titania-based hydrodesulfurization catalysts were prepared by using a one-pot solgel method with the titanium peroxo complex as titanium precursor and molybdenum and cobalt precursors dissolved in the aqueous hydrogen peroxide solution used during synthesis. Catalysts with MoO3 loadings varying from 5 to 40 wt?\% and a Co/Mo atomic ratio of 0.5 were prepared. Solids with molybdenum loadings below 20 wt?\% MoO3 demonstrated poor hydrodesulfurization activity for the model compound thiophene. This was attributed to the presence of a large amount of embedded cobalt and molybdenum species in the titania matrix. A significant increase in the catalytic activity was observed for solids containing 20 and 25 wt?\% of MoO3 on which active species appeared to be accessible on the titania surface. Furthermore, the highest conversion obtained on these solgel solids was superior to the highest conversion obtained on reference catalysts prepared through the impregnation of ammonium heptamolybdate and cobalt nitrate on commercial titania.

}, keywords = {cobalt, heterogeneous catalysis, Molybdenum, sol-gel process, titanium}, issn = {1867-3880}, doi = {10.1002/cctc.201200165}, author = {Nguyen, D. L. and Gillot, S. and Souza, D. O. and Blanchard, P. and Lamonier, Carole and Berrier, E. and Kotbagi, T. V. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Cristol, S. and Payen, E. and Lancelot, Christine} } @article { ISI:000307143600015, title = {Overview on the cellulose based conducting composites}, journal = {Composites Part B-Engineering}, volume = {43}, number = {7, SI}, year = {2012}, month = {OCT}, pages = {2822-2826}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Biopolymer based composites have been employed in numerous applications with increasing interest not only due to renewable, eco-friendly nature, but also because of the flexibility in processing conditions and competitive cost of their end products. The conductive materials from biopolymers have been found applicable in robots, medical imaging, sensitive membranes, actuators, visual displays, electronic wiring and shielding, and components in batteries. Cellulose is one of the most abundant biopolymers in the nature, which has received special attention for development of conducting materials due to biocompatibility for protein and drug immobilization and ability to form the composites with synthetic polymers. The present review is aimed to provide concisely the current status in this field of conducting composites from cellulose, with brief discussions of associated problems and future applications. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Fibres, mechanical properties, Nano-structures, Polymer-matrix composites (PMCs)}, issn = {1359-8368}, doi = {10.1016/j.compositesb.2012.04.045}, author = {Pandey, Jitendra Kumar and Takagi, Hitoshi and Nakagaito, Antonio Norio and Saini, Daulat Ram and Ahn, Sung-Hoon} } @article { ISI:000309096400004, title = {Poly(allyl glycidyl ether-co-ethylene glycol dimethacrylate) copolymer beads as support for covalent immobilization of L-aminoacylase}, journal = {Reactive \& Functional Polymers}, volume = {72}, number = {10}, year = {2012}, month = {OCT}, pages = {687-694}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Porous epoxy-activated copolymer beads were synthesized as support for the covalent immobilization of Aspergillus melleus L-aminoacylase. Here, a series of copolymer bead were synthesized using either glycidyl methacrylate (GMA) or ally] glycidyl ether (AGE) as monomer units and ethylene glycol dimethacrylate (EGDM) as cross-linking agent. The effect of monomer used and the effect of amount of cross-linking agent on covalent immobilization of aminoacylase were studied. Furthermore, the effect of porogen on immobilization of aminoacylase was also evaluated. AGE-co-EGDM copolymer beads gave higher binding of aminoacylase than GMA-co-EGDM copolymer beads. AGE-co-EGDM copolymer beads synthesized with lauryl alcohol as porogen and having 150\% cross-linked density (i.e. AGE-(L)-150) gave maximum enzyme binding. Under optimum conditions, AGE-(L)-150 copolymer beads gave about 130 U/g of aminoacylase activity which corresponds to 72.24\% of activity yield. Immobilized aminoacylase showed a broader pH, higher temperature and extended storage stability. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Enzyme immobilization, Epoxy-activated support, L-Aminoacylase}, issn = {1381-5148}, doi = {10.1016/j.reactfunctpolym.2012.06.012}, author = {Vaidya, Bhalchandra K. and Ingavle, Ganesh C. and Ponrathnam, S. and Nene, Sanjay N.} } @article { ISI:000308300700010, title = {Prediction of structure and energy of trans-1,4-polybutadiene glassy surface by atomistic simulations of free-standing ultrathin films}, journal = {Journal of Macromolecular Science Part B-Physics}, volume = {51}, number = {11}, year = {2012}, month = {MAR}, pages = {2201-2221}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Atomistic modeling of amorphous trans-1,4-polybutadiene (TPBD), using molecular mechanics and molecular dynamics (MD) simulations, is performed to generate three-dimensionally periodic bulk and two-dimensionally periodic thin film condensed phases. The condensed structures are constructed using multiple polymer chains. Structural and energetic relaxations and sampling of properties are performed using MD in the canonical ensemble (NVT) by a procedure that relieves local high-energy spots and brings the system to realistic thermodynamic states. The calculated surface energy for TPBD, 30.72 erg/cm(2), is in excellent agreement with the reported experimental value of 31 erg/cm(2). The structure of the surface layers is probed in terms of the atomic mass density variations, bond-bond orientation function profiles, and the distribution of the dihedral angles about the rotatable backbone bonds. The thickness of the surface layer over which the density varies smoothly but rapidly is found to be approximately 15 angstrom. The level of agreement of the calculated surface energy with the experimental value is superior in comparison to previous investigations in the literature using the atomistic approach for flexible polymers.

}, keywords = {4-polybutadiene, atomistic simulation, bond-orientation, Conformation, molecular dynamics, polymer glass, surface energy, trans-1}, issn = {0022-2348}, doi = {10.1080/00222348.2012.669683}, author = {Ijantkar, Ashwini S. and Natarajan, Upendra} } @article { ISI:000300036000006, title = {Preparation of cross-linked enzyme aggregates of L-aminoacylase via co-aggregation with polyethyleneimine}, journal = {Journal of Molecular Catalysis B-Enzymatic}, volume = {74}, number = {3-4}, year = {2012}, month = {FEB}, pages = {184-191}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

L-Aminoacylase from Aspergillus melleus was co-aggregated with polyethyleneimine and subsequently cross-linked with glutaraldehyde to obtain aminoacylase-polyethyleneimine cross-linked enzyme aggregates (termed as AP-CLEA). Under the optimum conditions, AP-CLEA expressed 74.9\% activity recovery and 81.2\% aggregation yield. The said method of co-aggregation and cross-linking significantly improved the catalytic stability of L-aminoacylase with respect to temperature and storage. AP-CLEA were employed for enantioselective synthesis of three unnatural amino acids (namely: phenylglycine, homophenylalanine and 2-naphthylalanine) via chiral resolution of their ester-. amide- and N-acetyl derivatives. The enantioselectivity of AP-CLEA was the highest for hydrolysis of amino acid amides; was moderate for hydrolysis of N-acetyl amino acids and was the least for hydrolysis of amino acid esters. Furthermore, AP-CLEA were found to retain more than 92\% of the initial activity after five consecutive batches of (RS)-homophenylalanine hydrolysis suggesting an adequate operational stability of the biocatalyst. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {chiral resolution, Cross-linked enzyme aggregates, L-Aminoacylase, Polyethyleneimine, Unnatural amino acids}, issn = {1381-1177}, doi = {10.1016/j.molcatb.2011.10.003}, author = {Vaidya, Bhalchandra K. and Kuwar, Suyog S. and Golegaonkar, Sandeep B. and Nene, Sanjay N.} } @article { ISI:000309568700049, title = {Reply to comment on {\textquoteleft}{\textquoteleft}Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles{\textquoteright}{\textquoteright}, by C. Noubactep}, journal = {Journal of Hazardous Materials}, volume = {235}, year = {2012}, month = {OCT}, pages = {392-393}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2011.04.015}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000298731600002, title = {Reply to the {\textquoteleft}{\textquoteleft}comments to CFD simulation of stirred tanks: comparison of turbulence models. part I: radial flow impellers and part II: axial flow impellers, multiple impellers and multiphase dispersions{\textquoteright}{\textquoteright}}, journal = {Canadian Journal of Chemical Engineering}, volume = {90}, number = {1}, year = {2012}, month = {FEB}, pages = {3-6}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, issn = {0008-4034}, doi = {10.1002/cjce.21610}, author = {Joshi, J. B. and Nere, N. K. and Rane, C. V. and Murthy, B. N. and Mathpati, Channamallikarjun S. and Patwardhan, A. W. and Ranade, V. V.} } @article { ISI:000311864500004, title = {Selectivity tuning options in hydrogenation of m-chloronitrobenzene to m-chloroaniline over mono- and bimetallic supported Pt catalysts}, journal = {Industrial \& Engineering Chemistry Research}, volume = {51}, number = {48}, year = {2012}, month = {DEC}, pages = {15564-15572}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Supported monometallic (Pt, Ni,) and bimetallic (Ni-Pt) catalysts were prepared for the selective liquid phase hydrogenation of m-chlronitrobenzene to m-chloroaniline (m-CAN). It was found that the use of sodium carbonate as an additive substantially reduced the extent of dehydrohalogenation in the case of monometallic, 1\% Pt/C catalyst, to give the highest selectivity of 96\% to m-CAN. Ni-Pt bimetallic catalyst although showed almost complete selectivity (\>99\%) to m-chloroaniline; its activity was several fold lower than that of 1\% Pt/C Na2CO3 system. However, compared with Ni monometallic catalyst, bimetallic Ni-Pt showed higher activity and selectivity due to the presence of electron rich surface metallic Pt stabilized by Ni having lower ionization potential compared with Pt.

}, issn = {0888-5885}, doi = {10.1021/ie301363x}, author = {Mane, Rasika B. and Potdar, Aparna S. and Nadgeri, Jayprakash M. and Biradar, Narayan S. and Rode, Chandrashekhar V.} } @article { ISI:000308345800010, title = {Solvent-free oxidation of aldehydes to acids by TBHP using environmental-friendly -exchanged Mg-Al hydrotalcite catalyst}, journal = {Journal of Chemical Sciences}, volume = {124}, number = {4}, year = {2012}, month = {JUL}, pages = {835-839}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A number of hydrotalcite (Mg-Al, Mn-Al, Co-Al, Ni-Al, Mg-Fe, Mg-Cr and Cu-Al) catalysts, with or without MnO-exchange, were evaluated for their performance in the solvent-free oxidation of benzaldehyde to benzoic acid by tert-butyl hydroperoxide under reflux in the absence of any solvent. The MnO-exchanged Mg-Al-hydrotalcite (Mg/Al = 10) showed high activity in the oxidation of different aromatic and aliphatic aldehydes to their corresponding acids and also showed excellent reusability in the oxidation process which is environmental-friendly.

}, keywords = {acid, Aldehyde, MnO4-1-exchanged Mg-Al-hydrotalcite catalyst, Oxidation, TBHP}, issn = {0974-3626}, doi = {10.1007/s12039-012-0268-7}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Narkhede, Vijay S.} } @article { ISI:000298839400032, title = {Strength from weakness: the role of CH center dot center dot center dot N hydrogen bond in the formation of wave-like topology in crystals of aza-heterocycles}, journal = {Crystengcomm}, volume = {14}, number = {2}, year = {2012}, month = {OCT}, pages = {519-524}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Crystal engineering has succeeded in the design and construction of various architectures such as tapes, ribbons, rosettes, layers etc. Though wavy layer packing is known to occur in crystals, no crystal engineering attempts have been ventured to create wavy layer topology in crystals. Aromatic nitrogen heterocyclics (ANHs) are known to preferentially self assemble in lateral fashion through edge-to-edge CH center dot center dot center dot N hydrogen bonds. Exploiting this preferential lateral assembly of ANHs, we have engineered wavy layer architectures in the crystals of various substituted quinolines.

}, issn = {1466-8033}, doi = {10.1039/c1ce05997a}, author = {Shivakumar, Kota and Vidyasagar, Adiyala and Naidu, Andra and Gonnade, Rajesh G. and Sureshan, Kana M.} } @article { ISI:000306215900061, title = {Structure engineering of naphthalene diimides for improved charge carrier mobility: self-assembly by hydrogen bonding, good or bad?}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {30}, year = {2012}, month = {MAY}, pages = {15235-15246}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two families of naphthalene diimide (NDI) derivatives were compared and contrasted for the effect of self-assembly on charge carrier transport. One series of NDI derivatives had a terminal phenyl ring attached to a hexyl spacer substituted naphthalene core either through an ester or an amide linkage (NDI-E and NDI-A, respectively), while the other series had a 3,4,5-tridodecyloxy phenyl unit (NDI-E3, NDI-A3) instead of the terminal phenyl unit. Solution processed thin films of these molecules exhibited n-type charge transport characteristics in a bottom gate top contact organic field effect transistor (OFET) geometry. The amide derivatives showed evidence of self-organization with observation of red shifted aggregate emission in solution as well as solid state. Variable temperature FTIR studies in the solid state confirmed the existence of strong hydrogen bonding which could be broken only at very high temperature. However, contrary to expectations, the NDI ester derivatives showed better device efficiency with electron mobilities in the range 8.5 x 10(-3) to 2 x 10(-2) cm(2) V-1 s(-1) and on/off ratio similar to 10(4). The thin film crystallinity and morphology of NDI-E and NDI-A were examined through X-ray diffraction and atomic force microscopy (AFM). The correlation of crystallinity, hydrogen bonding and charge carrier mobility was studied using energy minimized structures from density functional theory (DFT). The higher electron mobility of ester linked NDI derivatives over the amide linked ones was attributed to the freedom in charge transport pathways offered by a three dimensional crystalline organization in the ester compared to the restricted directional hydrogen bonding interaction in the amide derivatives.

}, issn = {0959-9428}, doi = {10.1039/c2jm32554c}, author = {Kolhe, Nagesh B. and Devi, R. Nandini and Senanayak, Satyaprasad P. and Jancy, B. and Narayan, K. S. and Asha, S. K.} } @article { ISI:000310931900030, title = {Synthesis of silk fibroin-glycopolypeptide conjugates and their recognition with lectin}, journal = {Biomacromolecules}, volume = {13}, number = {11}, year = {2012}, month = {NOV}, pages = {3695-3702}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Silk fibroin (SF), the natural fibrous protein created by the Bombyx mori silk worm, is being increasingly excellent mechanical strength, high oxygen/water permeability, excellent mechanical strength; high oxygen/water:permeability, and biocompatibility: :It is also well known that surface. modification of SF, With Organic ligands such as the extracellular protein :binding. Arg-Gly-Asp, (RGD) peptides:,: help adhesion and,proliferation. of cells better-a key; requirement for it to function as extracellular. matrices; In this, Work, We have conjugated synthetic glycopolypeptides (GPs) that were synthesized by controlled ring opening polymerization of alpha-manno-lys N-carboxyanhydrides (NCAs) onto SF by using Cu catalyzed click reaction to synthesize 1 a new hybrid :Material (SF GP), Which We believe will have :both the mechanical properties of native SF and the molecular recognition property of the carbohydrates in the GP. By controlling the :amount of GP grafted onto SF, we have made three SF GP conjugates that differ in their ability to assemble into films. SF GP conjugates having a very high content of GP formed completely water soluble brush like polymer that displayed very high affinity toward the lectin concanavalin-A (Con-A) Films cast from SF-GP conjugates using lower amounts of grafted GP were more stable in water, and the stability can be modulated by varying the amount of G grafted. The water insoluble film SF-GP(25) was also found to bind to fluorescently labeled Con A, as was seen by confocal microscopy Such SF-GP hybrid films may be useful as mimics of extracellular matrices for tissue engineering:

}, issn = {1525-7797}, doi = {10.1021/bm301170u}, author = {Das, Soumen and Pati, Debasis and Tiwari, Neha and Nisal, Anuya and Sen Gupta, Sayam} } @article { ISI:000308976200010, title = {Thermal expansion properties of stannosilicate molecular sieve with MFI type structure}, journal = {Chemical Physics Letters}, volume = {548}, year = {2012}, month = {OCT}, pages = {51-54}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

An in situ high temperature X-ray diffraction study was carried out for investigating the thermal expansion properties of Si-MFI and SnSi-MFI molecular sieves. The thermal stability up to 973 K and a negative lattice thermal expansion in anisotropic manner was exhibited by both the phases in the temperature range of 373-973 K. The trend observed in contraction along the axes was as: a \> c \> b. The substitution of Sn4+ in MFI framework resulted in an expansion of unit cell volume and in an increase in the lattice thermal expansion coefficient in the temperature range 423-973 K. (C) 2012 Elsevier B. V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2012.08.023}, author = {Niphadkar, P. S. and Bhange, Deu S. and Selvaraj, K. and Joshi, P. N.} } @article { ISI:000307308000020, title = {Transesterification of diethyl oxalate with phenol over sol-gel MoO3/TiO2 catalysts}, journal = {Chemsuschem}, volume = {5}, number = {8}, year = {2012}, month = {JUL}, pages = {1467-1473}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The transesterification of diethyl oxalate (DEO) with phenol to form diphenyl oxalate (DPO) has been carried out in the liquid phase over very efficient MoO3/TiO2 solid-acid solgel catalysts. A selectivity of 100?\% with a remarkable maximum yield of 88?\% were obtained, which opens the route to downstream phosgene-free processes for the synthesis of polycarbonates. Interpretation of the results of various acidity measurements (NH3 and pyridine desorption, methanol oxidation as a probe reaction) allowed us to identify the catalytic sites as Lewis acid sites.

}, keywords = {heterogeneous catalysis, Lewis acids, Oxidation, sol-gel processes, transesterification}, issn = {1864-5631}, doi = {10.1002/cssc.201100802}, author = {Kotbagi, Trupti and Duy Luan Nguyen and Lancelot, Christine and Lamonier, Carole and Thavornprasert, Kaew-Arpha and Zhu Wenli and Capron, Mickael and Jalowiecki-Duhamel, Louise and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck} } @article { ISI:000305379000012, title = {Transformation of (+/-)-lavandulol and (+/-)-tetrahydrolavandulol by a fungal strain Rhizopus oryzae}, journal = {Bioresource Technology}, volume = {115}, year = {2012}, month = {JUL}, pages = {70-74}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Biotransformation of an irregular monoterpene alcohol, (+/-)-lavandulol [(+/-)-5-methyl-2-(1-methylethenyl)-4-hexen-1-ol] (I) and its tetrahydro derivative, (+/-)-tetrahydrolavandulol [(+/-)-2-isopropyl-5-methylhexan-1-ol] (II) were studied using a soil isolated fungal strain Rhizopus oryzae. Five metabolites, 2-((3,3-dimethyloxiran-2-yl)methyl)-3-methylbut-3-en-1-ol (Ia), 2-methyl-5-(prop-1-en-2-yl)hex-2ene-1,6-diol (Ib), 2-methyl-5-(prop-1-en-2-yl)hexane-1,6-diol (Ic), 2-(3-methylbut-2-enyl)-3-methylenebutane-1,4-diol (Id), 5-methyl-2-(2-methyloxiran-2-yl)hex-4-en-1-01 (Ie) have been isolated from the fermentation medium and characterized with lavandulol as a substrate. When tetrahydrolavandulol used as a substrate, two metabolites 2-isopropyl-5-methylhexane-1,5-diol (IIa) and 2-isopentyl-3-methylbutane-1,3-diol (lib) have been isolated from the fermentation medium. Biotransformation studies with R. oryzae clearly indicate that the organism initiates the transformation either by hydroxylation at allylic methyl groups or epoxidation of double bond. GC and GCMS analyses indicated that both (R)and (S)-enantiomers of I and II have been transformed into corresponding hydroxylated or epoxy derivatives, when racemic I and II were used as substrates. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Biotransformation, Fungus, Lavandulol, Rhizopus oryzae, Tetrahydrolavandulol}, issn = {0960-8524}, doi = {10.1016/j.biortech.2011.11.038}, author = {Daramwar, Pankaj P. and Rincy, Raju and Niloferjahan, Siddiqui and Krithika, Ramakrishnan and Gulati, Arvind and Yadav, Amit and Sharma, Rakesh and Thulasiram, Hirekodathakallu V.} } @article { ISI:000302335800008, title = {Trehalose as an indicator of desiccation stress in Drosophila melanogaster larvae: a potential marker of anhydrobiosis}, journal = {Biochemical and Biophysical Research Communications}, volume = {419}, number = {4}, year = {2012}, month = {MAR}, pages = {638-642}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

In the current scenario of global climate change, desiccation is considered as one of the major environmental stressors for the biota exposed to altered levels of ambient temperature and humidity. Drosophila melanogaster, a cosmopolitan terrestrial insect has been chosen as a humidity-sensitive bioindicator model for the present study since its habitat undergoes frequent stochastic and/or seasonally aggravated dehydration regimes. We report here for the first time the occurrence of anhydrobiosis in D. melanogaster larvae by subjecting them to desiccation stress under laboratory conditions. Larvae desiccated for ten hours at \<5\% relative humidity could enter anhydrobiosis and could revive upon rehydration followed by resumption of active metabolism. As revealed by FIR and HPLC analyzes, our findings strongly indicated the synthesis and accumulation of trehalose in the desiccating larvae. Biochemical measurements pointed out the desiccation-responsive trehalose metabolic pathway that was found to be coordinated in concert with the enzymes trehalose 6-phosphate synthase and trehalase. Further, an inhibitor-based experimental approach using deoxynojirimycin, a specific trehalase inhibitor, demonstrated the pivotal role of trehalose in larval anhydrobiosis of D. melanogaster. We therefore propose trehalose as a potential marker for the assessment of anhydrobiosis in Drosophila. The present findings thus add to the growing list of novel biochemical markers in specific bioindicator organisms for fulfilling the urgent need of environmental biomonitoring of climate change. (C) 2012 Elsevier Inc. All rights reserved.

}, keywords = {Anhydrobiosis, biomarker, Deoxynojirimycin, Desiccation, Drosophila melanogaster, trehalose}, issn = {0006-291X}, doi = {10.1016/j.bbrc.2012.02.065}, author = {Thorat, Leena J. and Gaikwad, Sushama M. and Nath, Bimalendu B.} } @article { ISI:000305168600039, title = {Trehalose as an indicator of desiccation stress in Drosophila melanogaster larvae: a potential marker of anhydrobiosis (vol 419, pg 638, 2012)}, journal = {Biochemical and Biophysical Research Communications}, volume = {421}, number = {4}, year = {2012}, month = {MAY}, pages = {860}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, issn = {0006-291X}, doi = {10.1016/j.bbrc.2012.04.140}, author = {Thorat, Leena J. and Gaikwad, Sushama M. and Nath, Bimalendu B.} } @article { ISI:000299212700017, title = {Tuning spectral properties of phenothiazine based donor-pi-acceptor dyes for efficient dye-sensitized solar cells}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {3}, year = {2012}, month = {NOV}, pages = {889-894}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two novel metal-free organic donor-pi-acceptor dyes were synthesized using electron-rich 10-butyl-(2-methylthio)-10H-phenothiazine as a donor and cyanoacrylic acid as an acceptor. The spectral response of the dye was tuned by introducing a vinylene thiophene pi-bridge. Obtained optical and electrochemical properties of the dyes seemed to be promising in terms of employing them as light harvesters in dye-sensitized solar cells (DSCs). The efficiencies of the devices under standard AM 1.5G (100 mW cm(-2)) conditions reached 7.3\% with volatile electrolyte. The differences in the photovoltaic parameters of these DSCs were explained by comparing the results of electrochemical impedance spectroscopy (EIS) measurements and transient photovoltage and photocurrent decay experiments.

}, issn = {0959-9428}, doi = {10.1039/c1jm14024h}, author = {Marszalek, Magdalena and Nagane, Satyawan and Ichake, Amol and Humphry-Baker, Robin and Paul, Vincent and Zakeeruddin, Shaik M. and Graetzel, Michael} } @article {42589, title = {Twin liquid crystals and segmented thermotropic polyesters containing azobenzene?effect of spacer length on LC properties}, journal = {Journal of Polymer Science Part A: Polymer Chemistry}, volume = {50}, year = {2012}, month = {JUL}, pages = {2770{\textendash}2785}, abstract = {

We report systematic studies on a homologous series of twin liquid crystalline (LC) molecules based on phenyl and naphthyl azobenzene (PnP and NpnNp) as well as segmented copolyesters based on them. The twin series had the structure azobenzene{\textendash}oligooxyethylene{\textendash}azobenzene, where the ethyleneoxy length was varied from 2 to 6 units. The LC properties of the twin series depended on the chemical structure of the azochromophore and also the length of the central oligooxyethylene segment. The PnP series exhibited smectic LC properties for n \> three oligooxyethylene units. Conversely, NpnNp series exhibited spherulitic phases only for the shortest member {\textendash}Np2Np. One non-LC short spacer twin (P2P) and one LC long spacer twin (P6P) were incorporated as part of a main chain polyester composed of fully aliphatic segments of sebacate and di or tetraethylene glycol (DEG/TEG) units by melt polycondensation. Non-LC P2P formed LC polymers even at low (5 mol \%) incorporation in DEG-based copolymers, whereas the LC-P6P could do so only at 30 mol \% incorporation. The LC properties of the twin molecules as well as copolymers were studied using differential scanning calorimetry, polarized light microscopy (PLM) along with variable temperature wide angle X-ray diffraction. {\textcopyright} 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012

}, doi = {10.1002/pola.26062}, author = {Nardele, Chinmay G. and Asha, S. K.} } @article { ISI:000295772200014, title = {Ultrasound assisted one pot synthesis of imidazole derivatives using diethyl bromophosphate as an oxidant}, journal = {Ultrasonics Sonochemistry}, volume = {19}, number = {1}, year = {2012}, month = {JAN}, pages = {94-96}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A one pot, three-component condensation of benzoin/benzyl, an aldehyde, and ammonium acetate using diethyl bromophosphate as a mild oxidant is achieved to form trisubstituted imidazole compounds. Under ultrasound irradiation, a smooth condensation occurs to get the 2, 4, 5-triaryl-1H-imidazole compounds in good to excellent yields. The study explores the scope and limitation of diethyl bromophosphate as an oxidant and suggests advantages, viz., simplicity of operation, reduction in time, and an increase in product yields. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Diethyl bromophosphate (DEP), Imidazole, One pot synthesis, Ultrasound}, issn = {1350-4177}, doi = {10.1016/j.ultsonch.2011.05.009}, author = {Nagargoje, Deepak and Mandhane, Priyanka and Shingote, Savita and Badadhe, Pravin and Gill, Charansingh H.} } @article { ISI:000300466900006, title = {Understanding the growth of micro and nano-crystalline AlN by thermal plasma process}, journal = {Journal of Crystal Growth}, volume = {339}, number = {1}, year = {2012}, month = {JAN}, pages = {36-45}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We report the studies related to the growth of crystalline AlN in a DC thermal plasma reactor, operated by a transferred arc plasma torch. The reactor is capable of producing the nanoparticles of Al and AlN depending on the composition of the reacting gas. Al and AlN micro crystals are formed at the anode placed on the graphite and nano crystalline Al and AlN gets deposited on the inner surface of the plasma reactor. X-ray diffraction, Raman spectroscopy analysis, single crystal X-ray diffraction and TGA-DTA techniques are used to infer the purity of post process crystals as a hexagonal AlN. The average particle size using SEM was found to be around 30 mu m. The morphology of nanoparticles of Al and AlN, nucleated by gas phase condensation in a homogeneous medium were studied by transmission electron microscopy analysis. The particle ranged in size between 15 and 80 nm in diameter. The possible growth mechanism of crystalline AlN at the anode has been explained on the basis of non-equilibrium processes in the core of the plasma and steep temperature gradient near its periphery. The gas phase species of AlN and various constituent were computed using Murphy code based on minimization of free energy. The process provides 50\% yield of microcrystalline AlN and remaining of Al at anode and that of nanocrystalline h-AlN and c-Al collected from the walls of the chamber is about 33\% and 67\%, respectively. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Crystal morphology, Growth from high temperature solutions, Nitride, Semiconducting aluminum compound}, issn = {0022-0248}, doi = {10.1016/j.jcrysgro.2011.11.011}, author = {Kanhe, Nilesh S. and Nawale, Ashok B. and Gawade, Rupesh L. and Puranik, Vedavati G. and Bhoraskar, S. V. and Das, Asoka K. and Mathe, Vikas L.} } @article { ISI:000320036300013, title = {Ant-pro reverse-turn motif. structural features and conformational characteristics}, journal = {European Journal of Organic Chemistry}, number = {17, SI}, year = {2013}, month = {JUN}, pages = {3529-3542}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

This article details the characteristic conformational features of the Ant-Pro reverse turn ? a folded pseudo -turn motif that displays a closed nine-membered-ring hydrogen-bonded network involving just two amino acid residues, namely anthranilic acid (Ant; a constrained -amino acid), and proline (Pro; a constrained -amino acid). The results from the extensive investigation of ten crystal structures and their NMR conformations in the solution state provide a clear idea about the conformational characteristics of the Ant-Pro reverse turn. The Ant and Pro residues, which form the turn segment, maintain a perfect antiperiplanar orientation throughout, leaving little possibility for the formation of the otherwise possible six-membered hydrogen-bonding that requires a coplanar disposition of the two amino acid residues, as clearly evident from investigation of several crystal structures. The closed hydrogen-bonded network observed in the Ant-Pro reverse turn motif, formed in the forward direction of the sequence (12 amino acid interactions) involving only two amino acid residues, is in stark contrast to the native -turns that involve four residues to form hydrogen-bonded network featuring backward 14 amino acid interactions. The readily available two-residue Ant-Pro motif raises the possibility of a practical utility, particularly in the application of rigidifying flexible peptide backbones by inserting the robust Ant-Pro reverse turn motifs into their backbone.

}, keywords = {Peptides, Peptidomimetics, Protein folding, Protein structures}, issn = {1434-193X}, doi = {10.1002/ejoc.201201739}, author = {Thorat, Vijaykumar H. and Ingole, Tukaram S. and Vijayadas, Kuruppanthara N. and Nair, Roshna V. and Kale, Sangram S. and Ramesh, Veera V. E. and Davis, Hilda C. and Prabhakaran, Panchami and Gonnade, Rajesh G. and Gawade, Rupesh L. and Puranik, Vedavati G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000324309600011, title = {Basic structural motif and major biophysical properties of Amyloid-beta are encoded in the fragment 18-35}, journal = {Chemical Physics}, volume = {422}, number = {SI}, year = {2013}, month = {AUG}, pages = {80-87}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Aggregation and misfolding of the amyloid beta (A beta) peptide is thought to initiate Alzheimer{\textquoteright}s disease (AD). Here we study the role played by its central segment (A beta(18-35)) in determining these properties. A beta(18-35) has a solubility of 18 mu M. The soluble fraction consists mainly of small oligomers, which have mixed beta-sheet and random coil structures. The monomer is mostly a random coil with some residual compactness. Aggregated A beta(18-35) forms fibrils of width 3.0 +/- 0.7 nm, which is consistent with a hairpin shape. Each of these properties has a close similarity to A beta(40). Remarkably, solid state NMR indicates that the fibrils also retain the secondary structure and tertiary contacts of A beta(40). This is the shortest fragment of A beta reported so far which preserves its fibrillar architecture, including the hairpin turn, as well as its solution phase conformational properties. Residues 18-35 should therefore be a key target of AD therapeutics. (C) 2013 Published by Elsevier B. V.

}, keywords = {Alzheimer{\textquoteright}s disease, Fluorescence correlation spectroscopy, Protein aggregation, Solid-state NMR}, issn = {0301-0104}, doi = {10.1016/j.chemphys.2013.01.010}, author = {Chandrakesan, Muralidharan and Sarkar, Bidyut and Mithu, Venus Singh and Rajiv M. Abhyankar and Bhowmik, Debanjan and Nag, Suman and Sahoo, Bankanidhi and Shah, Riddhi and Gurav, Sushma and Banerjee, Raja and Dandekar, Sucheta and Jose, Jaya C. and Sengupta, Neelanjana and Madhu, Perunthiruthy K. and Maiti, Sudipta} } @article { ISI:000326008500015, title = {Biocatalyst mediated production of 6 beta,11 alpha-dihydroxy derivatives of 4-ene-3-one steroids}, journal = {Steroids}, volume = {78}, number = {11}, year = {2013}, month = {NOV}, pages = {1152-1158}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Biotransformation of steroids with 4-ene-3-one functionality such as progesterone (I), testosterone (II), 17 alpha-methyltestosterone (III), 4-androstene-3,17-dione (IV) and 19-nortestosterone (V) were studied by using a fungal system belonging to the genera of Mucor (M881). The fungal system efficiently and quantitatively converted these steroids in regio- and stereo-selective manner into corresponding 6 beta,11 alpha-dihydroxy compounds. Time course experiments suggested that the transformation was initiated by hydroxylation at 6 beta- or 11 alpha-(10 beta-hydroxy in case of V) to form monohydroxy derivatives which upon prolonged incubation were converted into corresponding 613,11oc-dihydroxy derivatives. The fermentation studies carried out using 5 L table-top fermentor with substrates (I and II) clearly indicates that 6 beta,11 alpha-dihydroxy derivatives of steroids with 4-ene-3-one functionality can be produced in large scale by using M881. (C) 2013 Elsevier Ltd.

}, keywords = {4-Ene-3-one steroids, Biotransformation, Mucor sp.}, issn = {0039-128X}, doi = {10.1016/j.steroids.2013.08.004}, author = {Kolet, Swati P. and Niloferjahan, Siddiqui and Haldar, Saikat and Gonnade, Rajesh G. and Thulasiram, Hirekodathakallu V.} } @article { ISI:000326660900038, title = {Carrier free co-immobilization of alpha amylase, glucoamylase and pullulanase as combined cross-linked enzyme aggregates (combi-CLEAs): a tri-enzyme biocatalyst with one pot starch hydrolytic activity}, journal = {Bioresource Technology}, volume = {147}, year = {2013}, month = {NOV}, pages = {269-275}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A tri-enzyme biocatalyst {\textquoteleft}{\textquoteleft}combi-CLEAs{\textquoteright}{\textquoteright} with starch hydrolytic activity was prepared from commercially available alpha amylase, glucoamylase and pullulanase preparations by aggregating enzymes with ammonium sulphate followed by cross-linking formed aggregates for 4.5 h with 40 mM glutaraldehyde. The effects of precipitant type and cross-linking were studied and the biocatalyst was characterized. Scanning electron microscopy analysis showed that tri-enzyme biocatalyst was of spherical structure. For one pot starch hydrolytic activity, shift in optimum pH from 6 to 7 and temperature from 65 to 75 degrees C were observed after co-immobilization of enzymes. After one pot starch hydrolysis reaction in batch mode, 100\%, 60\% and 40\% conversions were obtained with combi-CLEAs, separate CLEAs mixture and free enzyme mixture, respectively. Co-immobilization also enhanced the thermal stability of enzymes. Finally, the catalytic activity of enzymes in combi-CLEAs during one pot starch hydrolysis was well maintained up to five cycles without performance changes. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Alpha amylase, Combined cross-linked enzyme aggregates (combi-CLEAs), Glucoamylase, One pot starch hydrolysis, Pullulanase}, issn = {0960-8524}, doi = {10.1016/j.biortech.2013.08.035}, author = {Talekar, Sachin and Pandharbale, Amol and Ladole, Mayur and Nadar, Shamraja and Mulla, Mosin and Japhalekar, Kshitija and Pattankude, Kishori and Arage, Devika} } @article { ISI:000320976600013, title = {Catalytic upgrading of renewable levulinic acid to ethyl levulinate biodiesel using dodecatungstophosphoric acid supported on desilicated H-ZSM-5 as catalyst}, journal = {Applied Catalysis A-General}, volume = {460}, year = {2013}, month = {JUN}, pages = {90-98}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Levulinic acid (LA) is considered as a renewable platform chemical and can be used for the synthesis of variety of important fuels and chemicals. In particular, its esterification with ethanol produces ethyl levulinate (EL) would be green process, as it can be used as diesel miscible biofuel (DMB), preventing global warming by decreasing atmospheric CO2. This study explores the use of modified H-ZSM-5 by desilication viz.; DH-ZSM-5 and dodecatungstophosphoric acid (DTPA) loaded on DH-ZSM-5 for esterification of LA with ethanol aiming to EL. Different degree of desilication of H-ZSM-5 was performed by using aq. NaOH (0.2-1.5 M) at 338 K for 30 min and then DTPA was loaded on these desilicated H-ZSM-5 (DH-ZSM-5) support. H-ZSM-5, DH-ZSM-5 and DTPA on these DH-ZSM-5 samples were characterized by powder x-ray diffraction (XRD), N-2 adsorption-desorption, pyridine chemisorbed IR spectroscopy, Temperature Programmed Ammonia Desorption (TPAD). The increase in conversion of levulinic acid was observed from 28\% to 94\% with increase of DTPA loading from 0\% to 15\%. The increased LA conversion may be due to increase in total acidity from 43.14\% to 84.31\%. The use of DH-ZSM-5 as support for deposition of DTPA may be reported for the first time. The present work also extended to optimize process parameters such as DTPA loading on DH-ZSM-5, catalyst to LA ratio, LA to ethanol molar ratio, speed of agitation, particle size reaction temperature and catalyst reusability. Kinetic study based on pseudo-homogeneous (P-H) model is also presented. The experimental results follow second order kinetics. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {desilicated H-ZSM-5, DTPA on desilicated H-ZSM-5, Esterification, ethyl levulinate, levulinic acid}, issn = {0926-860X}, doi = {10.1016/j.apcata.2013.04.024}, author = {Nandiwale, Kakasaheb Y. and Sonar, Shilpa K. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Deshpande, Shilpa S. and Patil, Vilas S. and Bokade, Vijay V.} } @article { ISI:000325836600014, title = {Characterization of three novel isoprenyl diphosphate synthases from the terpenoid rich mango fruit}, journal = {Plant Physiology and Biochemistry}, volume = {71}, year = {2013}, month = {OCT}, pages = {121-131}, publisher = {ELSEVIER FRANCE-EDITIONS SCIENTIFIQUES MEDICALES ELSEVIER}, address = {23 RUE LINOIS, 75724 PARIS, FRANCE}, abstract = {

Mango (cv. Alphonso) is popular due to its highly attractive, terpenoid-rich flavor. Although Alphonso is clonally propagated, its fruit-flavor composition varies when plants are grown in different geo-climatic zones. Isoprenyl diphosphate synthases catalyze important branch-point reactions in terpenoid biosynthesis, providing precursors for common terpenoids such as volatile terpenes, sterols and carotenoids. Two geranyl diphosphate synthases and a farnesyl diphosphate synthase were isolated from Alphonso fruits, cloned for recombinant expression and found to produce the respective products. Although, one of the geranyl diphosphate synthases showed high sequence similarity to the geranylgeranyl diphosphate synthases, it did not exhibit geranylgeranyl diphosphate synthesizing activity. When modeled, this geranyl diphosphate synthase and farnesyl diphosphate synthase structures were found to be homologous with the reference structures, having all the catalytic side chains appropriately oriented. The optimum temperature for both the geranyl diphosphate synthases was 40 degrees C and that for farnesyl diphosphate synthase was 25 degrees C. This finding correlated well with the dominance of monoterpenes in comparison to sesquiterpenes in the fruits of Alphonso mango in which the mesocarp temperature is higher during ripening than development. The absence of activity of these enzymes with the divalent metal ion other than Mg2+ indicated their adaptation to the Mg2+ rich mesocarp. The typical expression pattern of these genes through the ripening stages of fruits from different cultivation localities depicting the highest transcript levels of these genes in the stage preceding the maximum terpene accumulation indicated the involvement of these genes in the biosynthesis of volatile terpenes. (C) 2013 Elsevier Masson SAS. All rights reserved.

}, keywords = {Alphonso, Flavor variation, Fruit, Isoprenyl diphosphate synthase, Mangifera indica, Terpene volatiles}, issn = {0981-9428}, doi = {10.1016/j.plaphy.2013.07.006}, author = {Kulkarni, Ram and Pandit, Sagar and Chidley, Hemangi G. and Nagel, Raimund and Schmidt, Axel and Gershenzon, Jonathan and Pujari, Keshav and Giri, Ashok P. and Gupta, Vidya} } @article { ISI:000314792700017, title = {Commercializing technologies from universities and research institutes in India: some insights from the US experience}, journal = {Current Science}, volume = {104}, number = {2}, year = {2013}, month = {JAN}, pages = {183-189}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Translating research done in universities and research institutes to products and services in the market takes considerable and sustained effort. Dedicated technology transfer offices (TTOs) and supporting systems are required to achieve this. Starting from attracting the right people, devising flexible models to work with varioius commercial partners (like large and small companies, startups), bringing in external funding to further the technology goals, TTOs can perform a crucial role in commercializing academic technologies. Various strategies followed by TTOs in the US universities are analysed and suggestions to improve the technology transfer process in the Indian context are presented.

}, keywords = {Commercializing technologies, research institutes, technology transfer offices, universities}, issn = {0011-3891}, author = {Nandagopal, Magesh} } @article { ISI:000326148700058, title = {Contact potential induced enhancement of magnetization in polyaniline coated nanomagnetic iron oxides by plasma polymerization}, journal = {Applied Physics Letters}, volume = {103}, number = {16}, year = {2013}, month = {OCT}, pages = {162414}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The present work derives motivation from the so called surface/interfacial magnetism in core shell structures and commercial samples of Fe3O4 and gamma Fe2O3 with sizes ranging from 20 to 30 nm were coated with polyaniline using plasma polymerization and studied. The High Resolution Transmission Electron Microscopy images indicate a core shell structure after polyaniline coating and exhibited an increase in saturation magnetization by 2 emu/g. For confirmation, plasma polymerization was performed on maghemite nanoparticles which also exhibited an increase in saturation magnetization. This enhanced magnetization is rather surprising and the reason is found to be an interfacial phenomenon resulting from a contact potential. (C) 2013 AIP Publishing LLC.

}, issn = {0003-6951}, doi = {10.1063/1.4826459}, author = {Sethulakshmi, N. and Sooraj, V. and Sajeev, U. S. and Nair, Swapna S. and Narayanan, T. N. and Joy, Lija K. and Joy, Pattayil Alias and Ajayan, Pulickel M. and Anantharaman, Maliemadom R.} } @article { ISI:000326121800014, title = {Continuous flow multipoint dosing approach for selectivity engineering in sulfoxidation}, journal = {Organic Process Research \& Development}, volume = {17}, number = {10}, year = {2013}, month = {OCT}, pages = {1293-1299}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A continuous synthesis approach with multipoint dosing of one of the reagents is demonstrated for the synthesis of sulfoxide compounds such as proton pump inhibitors. Use of multipoint dosing of the oxidizing agent helped to minimize the possibility of over-oxidation leading to sulfone. Different oxidizing agents were used, and the effect of various parameters (viz. mole ratio of sulfide to oxidizing agent, temperature, residence time, concentration of oxidizing agent, etc.) on the yield of the desired sulfoxide compound was studied. Single-point and multipoint dosing approaches of the oxidizing agent were used for the most promising set of parameters. The performance was compared in terms of conversion of sulfide and the selectivity of the desired sulfoxide. Numbering up approach was used to produce the sulfoxide in a relatively large quantity at laboratory scale with complete conversion and over 99\% selectivity for the sulfoxide.

}, issn = {1083-6160}, doi = {10.1021/op400138v}, author = {Kulkarni, A. A. and Nivangune, N. T. and Joshi, Rohini R. and Joshi, Ramesh A.} } @article { ISI:000322611900037, title = {Correlation of hydrogen-bonding propensity and anticancer profile of tetrazole-tethered combretastatin analogues}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {23}, number = {16}, year = {2013}, month = {AUG}, pages = {4680-4684}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A series of 1,5-disubstituted tetrazole-tethered combretastatin analogues with extended hydrogen-bond donors at the ortho-positions of the aryl A and B rings were developed and evaluated for their antitubulin and antiproliferative activity. We wanted to test whether intramolecular hydrogen-bonding used as a conformational locking element in these analogues would improve their activity. The correlation of crystal structures with the antitubulin and antiproliferative profiles of the modified analogues suggested that hydrogen-bond-mediated conformational control of the A ring is deleterious to the bioactivity. In contrast, although there was no clear evidence that intramolecular hydrogen bonding to the B ring enhanced activity, we found that increased substitution on the B ring had a positive effect on antitubulin and antiproliferative activity. Among the various analogues synthesized, compounds 5d and 5e, having hydrogen-bonding donor groups at the ortho and meta-positions on the 4-methoxy phenyl B ring, are strong inhibitors of tubulin polymerization and antiproliferative agents having IC50 value in micromolar concentrations. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Colchicine, Combretastatin, Crystal, Tetrazole, Tubulin}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2013.06.004}, author = {Jedhe, Ganesh S. and Paul, Debasish and Gonnade, Rajesh G. and Santra, Manas K. and Hamel, Ernest and Tam Luong Nguyen and Sanjayan, Gangadhar J.} } @article { ISI:000326058500009, title = {Crystallization kinetics of Sn-MFI molecular sieve formation by dry gel cross mark conversion method}, journal = {Microporous and Mesoporous Materials}, volume = {182}, year = {2013}, month = {DEC}, pages = {73-80}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The conversion of amorphous stannosilicate dry gel into crystalline molecular sieve with MFI structure (Sn-MFI) was achieved by dry gel conversion (DGC) method at 413, 443 and 473 K. For comparison purpose, Sn-MFI molecular sieve with similar SiO2/SnO2 mole ratio was also obtained by hydrothermal crystallization route. Crystallization curves were established by conducting time dependant studies on progressive crystallization processes for both the systems. The values of activation energy of nucleation (E-n), activation energy of crystallization (E-c), and their pre-exponential factors (InA(n), InA(c) respectively) were calculated from Arrhenius plots. Compared to the hydrothermal method, shorter induction period was observed when DGC method was employed. Both the E-n (49.70 kJ/mol) and E-c (52.82 kJ/mol) for DGC method were found to be lower than that of the E-n (55.70 kJ/mop and E-c (60.23 kJ/mol) for hydrothermal method. The kinetics parameters viz. K and q were derived from kinetic expressions and DGC method showed higher value of K and lower value of q compared to hydrothermal crystallization method at identical temperature. Various DGC method parameters such as water content at the bottom of autoclave and SiO2/SnO2 mole ratio have shown the influence on the kinetics of crystallization of Sn-MFI. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Crystallization, DGC, kinetics, Nucleation, Sn-MFI}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2013.08.026}, author = {Niphadkar, P. S. and Tangale, N. P. and Joshi, P. N. and Awate, S. V.} } @article { ISI:000325676500006, title = {Dehydration of fructose to 5-hydroxymethyl furfural over ordered AlSBA-15 catalysts}, journal = {Microporous and Mesoporous Materials}, volume = {181}, year = {2013}, month = {NOV}, pages = {38-46}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

5-Hydroxymethyl furfural is an important platform chemical. It is successfully synthesized from renewable carbohydrates using mesoporous AlSBA-15 catalysts under biphasic conditions. Fine tuning of the catalyst acidity is important to drive the reaction to give good yields of furan compound. Al-SBA-15 catalysts with different Si/Al ratios were prepared and characterized by XRD, Al-27 MASNMR, SEM, TEM, N-2 sorption, ICP-OES and TPD of ammonia. Results show that part of aluminium is substituted into tetrahedral positions. The catalyst with lower acid site density but medium to strong acid strength favours selective formation of HMF. Under the optimized conditions, HMF selectivity was as high as 88\% at 59 mol\% conversion of fructose. Leaching of part of aluminium occurs under hydrothermal conditions, if solvent mixtures containing water are used, while activity can be retained if DMSO is used as solvent. (c) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Acidity, AlSBA-15, dehydration, fructose, Hydroxymethyl furfural}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2013.07.015}, author = {Lucas, Nishita and Kokate, Ganesh and Nagpure, Atul and Chilukuri, Satyanarayana V.} } @article { ISI:000327803900050, title = {Dehydrogenation of cyclohexanol over Cu/Al2O3 catalysts prepared with different precipitating agents}, journal = {Applied Catalysis A-General}, volume = {467}, year = {2013}, month = {OCT}, pages = {421-429}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Dehydrogenation of cyclohexanol over Cu/Al2O3 catalysts (molar Cu:Al = 1:1) prepared by reduction of mixed oxide precursors synthesized using different precipitating agents viz, potassium carbonate, tetraalkyl ammonium hydroxides (TAAOHs) and urea was investigated. In order to assess the efficacy of TAAOH further, the chain length of tetraalkyl ammonium cations was also varied and the resulted catalysts were evaluated for their catalytic performance. The catalysts were characterized by powder X-ray diffraction, low temperature nitrogen adsorption, temperature programmed desorption of ammonia and UV-visible diffuse reflectance spectroscopy. The dependence of the catalyst performance on the precipitating agent employed during its synthesis has been clearly demonstrated. The use of TAAOH as precipitating agent led to the formation of a catalyst with better catalytic activity than those prepared using potassium carbonate and urea. Further improvement in the catalytic performance was observed when TAAOH with longer alkyl chain ammonium cation was used. The optimum catalyst prepared by reduction of mixed oxide precursor synthesized using tetrapropyl ammonium hydroxide as precipitating agent, showed highest cyclohexanol conversion (81.5\%) and cyclohexanone selectivity (79.6\%) at 250 degrees C on account of higher Cu+/Cu-0 ratio, well dispersed copper, higher surface area and lower total acidity with higher contribution of sites with moderate strength. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Characterization, Cu/Al2O3, Cyclohexanol dehydrogenation, Precipitating agent, Tetraalkyl ammonium hydroxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2013.07.063}, author = {Tangale, Nilesh P. and Niphadkar, Prashant S. and Deshpande, Shilpa S. and Joshi, Praphulla N.} } @article { ISI:000319645000009, title = {Direct synthesis of amides from amines using mesoporous Mn-SBA-12 and Mn-SBA-16 catalysts}, journal = {Catalysis Communications}, volume = {37}, year = {2013}, month = {JUL}, pages = {36-40}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Manganese incorporated SBA-12 and SBA-16 catalyze the tandem reaction of aliphatic primary amine, aerial oxygen and ammonia solution at moderate conditions producing amide in yields as high as 50 mol\%. The Mn-SBA-12 and Mn-SBA-16 catalysts with Si/Mn output molar ratio in the range 230 to 748 were prepared by the direct hydrothermal synthesis method and characterized. Weak acidity and Mn in +3 oxidation state are the key factors enable the synthesis of product amide in high yields. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Aerial oxidation, Amide synthesis, Benzyl amine, Manganese incorporated SBA-12 and SBA-16, Mesoporous Mn-silica catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2013.03.020}, author = {Kumar, Anuj and Nepak, Devadutta and Srinivas, Darbha} } @article { ISI:000315013200017, title = {Disordered mesoporous V/TiO2 system for ambient oxidation of sulfides to sulfoxides}, journal = {Applied Catalysis A-General}, volume = {452}, year = {2013}, month = {FEB}, pages = {132-138}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

High sulfide conversion and predominant sulfoxide yield has been observed with 0.1\% vanadium doped disordered mesoporous Ti1-xVxO2 material at ambient and sub ambient temperatures using environmentally green H2O2 oxidant. Ti1-xVxO2 materials were prepared by one-pot solution combustion method in less than 15 min and thoroughly characterized by X-ray diffraction, HRTEM, Raman spectra and other physicochemical techniques. Different sulfides, such as, phenylsulfide, methyl-p-tolylsulfide, ethylsulfide, thioanisole, were converted into the corresponding sulfoxide. Isolated V5+ incorporated in the TiO2 lattice is likely to be the active species for the sulfide oxidation reaction. Catalyst recycling studies indicates the robustness of the catalyst. (c) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Ambient oxidation, Combustion synthesis, heterogeneous catalysis, Hydrogen peroxide, Mesoporous TiO2, Sulfoxidation, Sulfoxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2012.11.035}, author = {Negi, Sanjay Singh and Sivaranjani, Kumarsrinivasan and Singh, Anand Pal and Gopinath, Chinnakonda S.} } @article { ISI:000326608500035, title = {Donor-acceptor random copolyesters containing perylenebisimide (PBI) and oligo(p-phenylene vinylene) (OPV) by melt condensation polymerization: energy transfer studies}, journal = {Journal of Physical Chemistry B}, volume = {117}, number = {43}, year = {2013}, month = {OCT}, pages = {13710-13722}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Novel copolyesters consisting of oligo(p-phenylene vinylene) (OPV) as donor (D) and perylenebisimide (PBI) as acceptor (A) were synthesized by melt polycondensation. Photoinduced energy transfer and photoinduced charge separation in these polyesters were studied in solution as well as in the solid state. Selective excitation of OPV moiety resulted in the energy transfer with \>90\% efficiency from OPV to PBI chromophore in the solution state. The direct excitation of PBI in the D A copolyester resulted in reduced fluorescence emission of acceptor, indicating electron transfer between the D and A moieties. The effect of distance between donor and acceptor on the energy transfer efficiency from donor to acceptor was studied. Compared to a physical mixture of D and A polyesters alone, the energy transfer was 4 times more efficient in the D A copolyester, highlighting the influence of covalently linking D and A in a single polymer chain. A strong fluorescence quenching (similar to 100\%) of both chromophores in solid state indicated an efficient photoinduced charge transfer after photoexcitation of either D or A. Thus, OPV-PBI main chain copolyester is an excellent system for the study of energy- and electron-transfer processes in organic semiconductor. Reactive blend of D/A copolyester was also prepared by the transesterification reaction between D and A alone copolyesters. The energy transfer efficiency from D to A moiety upon selective excitation of D chromophore in the D/A copolyester blend was similar to 4 times higher compared to a physical mixture of D and A alone copolyesters, which gave direct proof for the transesterification reaction in polyester/polyester reactive blending.

}, issn = {1520-6106}, doi = {10.1021/jp408355j}, author = {Nisha, S. Kumari and Asha, S. K.} } @article { ISI:000315306200009, title = {Effect of clay and of electrospinning on the polymorphism, structure and morphology of poly(vinylidene fluoride)}, journal = {European Polymer Journal}, volume = {49}, number = {1}, year = {2013}, month = {JAN}, pages = {90-99}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Electrospun poly(vinylidene fluoride) (PVDF) fibers, containing different amounts of montmorillonite clay were produced, in order to study the effect of clay and of the electrospinning process on the polymorphism, structure and morphology of the PVDF matrix, Clay acted as a processing aid agent, avoiding the formation of beads and improving the quality of the fibers. Clay and the electrospinning process acted synergically on the chain mobility, favoring the formation of beta phase of PVDF, the most valuable for its piezoelectric properties, and shaping its semicrystalline morphology. Electrospinning did not significantly aid the dispersion of clay within the matrix. The interplay of formulation and processing in these composites allowed to obtain PVDF-based materials with varying polymorphism, structure and morphology, offering the possibility to ultimately control their functional properties. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Composite, electrospinning, Poly(vinylidene fluoride), Polymer, polymorphism, SAXS}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2012.09.023}, author = {Neppalli, Ramesh and Wanjale, Santosh and Birajdar, Mallinath S. and Causin, Valerio} } @article { ISI:000316637200009, title = {Effect of organic modification on the intercalation and the properties of poly(phenylene oxide)/polystyrene blend-clay nanocomposites}, journal = {Journal of Thermoplastic Composite Materials}, volume = {26}, number = {3}, year = {2013}, month = {APR}, pages = {392-415}, publisher = {SAGE PUBLICATIONS LTD}, address = {1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND}, abstract = {

Nanocomposites prepared by the dispersion of unmodified and organically modified montmorillonite (MMT) clay into poly(2,6-dimethyl phenylene oxide)/polystyrene miscible blend in the range of 2-10 wt\% clay were investigated by wide-angle x-ray diffraction, transmission electron microscopy, differential scanning calorimetry, thermogravimetric analysis and tensile mechanical tests. The systems based on unmodified sodium MMT (Na+MMT) as well as Cloisite 20A, Cloisite 30B and Cloisite 10A organically modified clays showed polymer intercalation. The glass transition temperature (T-g) value was not affected by the volume fraction of clay and chemical nature of the organoclay. The thermal degradation stability of nanocomposites is found to be only slightly better than that of the blend matrix. A percolation threshold of around 4 wt\% organoclay loading is observed. An improvement of 35\% relative to unfilled polymer blend matrix is observed for the modulus, for Cloisite 20A nanocomposite containing 2 wt\% organoclay. The observed modulus improvement with significant retention of elongational tensile strength and tensile ductility in case of unmodified Na-MMT and Cloisite 30B nanocomposites appears promising. The modulus prediction using Halpin-Tsai model is found to be closer to the experimental data when MMT volume fraction rather than the organoclay volume fraction is used.

}, keywords = {filler, interface, interphase, mechanical properties, Nanostructures, Polymer-matrix composites}, issn = {0892-7057}, doi = {10.1177/0892705712439559}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article { ISI:000315936700014, title = {Efficient and stereoselective nitration of mono- and disubstituted olefins with AgNO2 and TEMPO}, journal = {Journal of the American Chemical Society}, volume = {135}, number = {9}, year = {2013}, month = {MAR}, pages = {3355-3358}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nitroolefin is a common and versatile reagent. Its synthesis from olefin is generally limited by the formation of mixture of cis and trans compounds. Here we report that silver nitrite (AgNO2) along with TEMPO can promote the regio- and stereoselective nitration of a broad range of olefins. This work discloses a new and efficient approach wherein starting from olefin, nitroalkane radical formation and subsequent transformations lead to the desired nitroolefin in a stereoselective manner.

}, issn = {0002-7863}, doi = {10.1021/ja311942e}, author = {Maity, Soham and Manna, Srimanta and Rana, Sujoy and Naveen, Togati and Mallick, Arijit and Maiti, Debabrata} } @article { ISI:000323644600048, title = {Enhanced dual-effect of adsorption and photodegradation of SiO2 embedded TiO2 hybrid catalyst for improved decolourization of methylene blue}, journal = {Water Air and Soil Pollution}, volume = {224}, number = {9}, year = {2013}, month = {SEP}, pages = {1726}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Dual-effects of adsorption and photodegradation over titania, silica embedded titania, silica and commercial Degussa P-25 samples were studied for the decolourization of methylene blue in aqueous medium. Silica embedded titania and silica were prepared using inexpensive polymeric version of ethyl silicate as a source of silica. Catalysts were characterized by X-ray diffraction, scanning electron microscopy, UV-Vis spectroscopy and low temperature (77 K) nitrogen adsorption measurements. Among all the catalysts, silica embedded titania has exhibited faster decolourization of methylene blue solution on account of the enhancement of adsorption followed by degradation. An amount of the catalyst and the initial dye concentration of MB solution were found to influence the decolourization activity. Compared to titania catalyst, silica embedded titania and Degussa P-25 have shown the red shift in their UV-Vis spectrum. The experimental data of the reaction fitted well to the pseudo first order kinetic model. In present studies, the adsorption mechanism for the decolourization of MB solution was found to be applicable for an intra particle diffusion model.

}, keywords = {Adsorption, kinetic model, Methylene blue, Photodegradation, Silica embedded titania}, issn = {0049-6979}, doi = {10.1007/s11270-013-1726-7}, author = {Sonar, Shilpa K. and Wagh, Reshma V. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Deshpande, Shilpa S. and Awate, Shobhana V.} } @article { ISI:000327459400021, title = {Environmentally benign enhanced H-2 production from abundant copious waste H2S using size tuneable cubic bismuth (Bi-0) quantum dots-GeO2 glass photocatalyst under solar light}, journal = {Green Chemistry}, volume = {15}, number = {12}, year = {2013}, month = {OCT}, pages = {3459-3467}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hydrogen sulfide is a copious gas produced in refineries (15-20\%) as well as billions of tons produced as a by-product in alkali industries. Selectively, only 5\% has been utilised for the Claus process to produce liquid sulfur and it is also well known for its uneconomical and environmental problems. Here, we have demonstrated a significant green approach for conversion of poisonous H2S into H-2 by stable cubic bismuth (Bi-0) quantum dot-glass nanosystems using solar light as the energy source. Previously, metal oxides and sulfides have been demonstrated as solar light photocatalysts. However, a unique bismuth quantum dot-glass nanosystem has been designed where cubic phase bismuth quantum dots of size 1-2 nm are grown in the germanate glass matrix successfully. The presence of bismuth (Bi-0) was confirmed by XRD, Raman, TEM and X-ray photoelectron spectroscopy (XPS). The glass nanosystem shows quantum confinement with variation of the band gap from 2.95-1.51 eV. Considering the broad absorption from visible to near IR, we used this glass nanosystem as a solar light active photocatalyst and hydrogen production with respect to the quantum confinement of bismuth (Bi-0) quantum dots has been demonstrated for the first time. The photocatalytic activity for hydrogen production using glass nano-systems having bismuth quantum dot sizes of 1-2 nm and 3-6 nm was measured under solar light and prima fascia observations revealed that the glass nanosystems with very small quantum dots (1-2 nm) showed enhanced hydrogen evolution (11 541 mu mol h(-1) g(-1)) from H2S. The hydrogen evolution obtained is much higher than for previously reported visible light active nanostructured sulfide/oxide or embedded glass nanosystems. The glass nanosystems were also used for water splitting and show evolution of hydrogen without any co-catalyst. It is noteworthy that the quantum dot-glass photocatalyst is highly stable and catalyst regeneration is quite easy and fast. Hence, the QD-bismuth-glass nanocomposites have significant advantages over normal nanosized powder catalysts. Such unique glass nanosystems will also have great potential in photonics and optoelectronic applications.

}, issn = {1463-9262}, doi = {10.1039/c3gc41940a}, author = {Apte, Sanjay K. and Garaje, Sunil N. and Naik, Sonali D. and Waichal, Rupali P. and Kale, Bharat B.} } @article { ISI:000328182900006, title = {Ester vs. amide on folding: a case study with a 2-residue synthetic peptide}, journal = {Organic \& Biomolecular Chemistry}, volume = {11}, number = {48}, year = {2013}, month = {DEC}, pages = {8348-8356}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Although known for their inferiority as hydrogen-bonding acceptors when compared to amides, esters are often found at the C-terminus of peptides and synthetic oligomers (foldamers), presumably due to the synthetic readiness with which they are obtained using protected peptide coupling, deploying amino acid esters at the C-terminus. When the H-bonding interactions deviate from regularity at the termini, peptide chains tend to {\textquoteleft}{\textquoteleft}fray apart{\textquoteright}{\textquoteright}. However, the individual contributions of C-terminal esters in causing peptide chain end-fraying goes often unnoticed, particularly due to diverse competing effects emanating from large peptide chains. Herein, we describe a striking case of a comparison of the individual contributions of C-terminal ester vs. amide carbonyl as a H-bonding acceptor in the folding of a peptide. A simple two-residue peptide fold has been used as a testing case to demonstrate that amide carbonyl is far superior to ester carbonyl in promoting peptide folding, alienating end-fraying. This finding would have a bearing on the fundamental understanding of the individual contributions of stabilizing/destabilizing non-covalent interactions in peptide folding.

}, issn = {1477-0520}, doi = {10.1039/c3ob41967c}, author = {Vijayadas, Kuruppanthara N. and Nair, Roshna V. and Gawade, Rupesh L. and Kotmale, Amol S. and Prabhakaran, Panchami and Gonnade, Rajesh G. and Puranik, Vedavati G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000314149000005, title = {Facile one-pot reactive solution blending approach for main-chain donor-acceptor polymeric materials}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {51}, number = {3}, year = {2013}, month = {FEB}, pages = {509-524}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A high-temperature solution blending process has been used to synthesize a series of copolymers incorporating varying mole ratios of perylenebisimide (PBI) into the backbone of an engineering thermoplastic polyester [poly(1,4-cyclohexylenedimethylene-1,4-cyclohexanedicarboxylate)] (PCCD). A random donor-acceptor copolymer incorporating oligo(p-phenylene vinylene) (OPV) and PBI was also synthesized. The chemical incorporation of these chromophores into PCCD was confirmed by carrying out the melt condensation using 1,4-cyclohexanedimethanol and 1,4-dimethylcyclohexane dicarboxylate with hydroxyl-functionalized PBI and OPV derivatives. Higher extent of incorporation of PBI (35 mol \%) could be achieved using the blending approach retaining solubility, film-forming ability, and higher molecular weights. The PBI polymers produced using the two different approaches exhibited structural variations. The polymers formed from the solution blending approach had a semicrystalline nature with blocks of PCCD separating the PBI units, whereas those produced using the melt condensation route were amorphous polymers. This structural variation was reflected in their photophysical properties also with the reactive solution-blended polymers exhibiting higher fluorescence quantum yields. These results demonstrate the easy incorporation of suitably functionalized donor and acceptor moieties into a completely aliphatic polyester backbone to produce free-standing films of hitherto nonprocessable polymers. (C) 2012 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 509-524

}, keywords = {blending, conjugated polymers, fluorescence, PCCD, Perylenebisimide, reactive blending, transesterification}, issn = {0887-624X}, doi = {10.1002/pola.26412}, author = {Nisha, S. Kumari and Asha, S. K.} } @article { ISI:000316812800023, title = {Facile strategy for synthesis of ,-heterobifunctionalized poly (epsilon-caprolactones) and poly (methyl methacrylate)s containing {\textquoteleft}{\textquoteleft}clickable{\textquoteright}{\textquoteright} aldehyde and allyloxy functional groups using initiator approach}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {51}, number = {9}, year = {2013}, month = {MAY}, pages = {2091-2103}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Two new initiators, namely, 4-(4-(2-(4-(allyloxy) phenyl)-5-hydroxypentane 2-yl) phenoxy)benzaldehyde and 4-(4-(allyloxy) phenyl)-4-(4-(4-formylphenoxy) phenyl) pentyl 2-bromo-2-methyl propanoate containing clickable hetero-functionalities namely aldehyde and allyloxy were synthesized starting from commercially available 4,4-bis(4-hydroxyphenyl) pentanoic acid. These initiators were utilized, respectively, for ring opening polymerization of epsilon-caprolactone and atom transfer radical polymerization of methyl methacrylate. Well-defined -aldehyde, -allyloxy heterobifunctionalized poly(epsilon-caprolactones) (Mn,GPC: 590029,000, PDI: 1.261.43) and poly(methyl methacrylate)s (Mn,GPC: 530028800, PDI: 1.191.25) were synthesized. The kinetic study of methyl methacrylate polymerization demonstrated controlled polymerization behavior. The presence of aldehyde and allyloxy functionality on polymers was confirmed by 1H NMR spectroscopy. Aldehyde-aminooxy and thiol-ene metal-free double click strategy was used to demonstrate reactivity of functional groups on polymers. (c) 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013, 51, 2091-2103

}, keywords = {atom transfer radical polymerization, Click chemistry, functional polymers, ring opening polymerization}, issn = {0887-624X}, doi = {10.1002/pola.26598}, author = {Sane, Prakash S. and Tawade, Bhausaheb V. and Parmar, Indravadan and Kumari, Savita and Nagane, Samadhan and Wadgaonkar, Prakash P.} } @article { ISI:000316691100012, title = {Fluorescent sophorolipid molecular assembly and its magnetic nanoparticle loading: a pulsed laser process}, journal = {Green Chemistry}, volume = {15}, number = {4}, year = {2013}, month = {JAN}, pages = {943-953}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report realization of strong green fluorescence in a fully biocompatible highly spherical mesoscale molecular assembly of sophorolipid created by pulsed UV laser processing of a water-based dispersion of sophorolipid. Remarkably, the said fluorescence is totally absent in the original molecule of sophorolipid and is thus the property of the pulsed laser induced modifications in the molecule and the assembly. We have separately examined the consequences of laser irradiation for glucose and oleic acid components which form the sophorolipid. This fluorescence character appears to be driven by the oleic acid component while the assembly process is assisted by the glucose component. Importantly the laser synthesized mesostructures can be easily redispersed in an aqueous medium after being dried and can also be loaded with magnetic nanoparticles (magnetite) for inducing the hyperthermia effect.

}, issn = {1463-9262}, doi = {10.1039/c3gc40108a}, author = {Singh, Pradeep Kumar and Mukherji, Ruchira and Joshi-Navare, Kasturi and Banerjee, Abhik and Gokhale, Rohan and Nagane, Satyawan and Prabhune, Asmita and Ogale, Satishchandra} } @article { ISI:000316812000002, title = {Fractal nature of protein surface roughness: a note on quantification of change of surface roughness in active sites, before and after binding}, journal = {Journal of Molecular Recognition}, volume = {26}, number = {5}, year = {2013}, month = {MAY}, pages = {201-214}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Year 2010 marked the 25th year since we came to know that roughness of a protein surface has fractal symmetry. Ever since the publication of Lewis and Rees{\textquoteright} paper, hundreds of works from a spectrum of perspectives have established that fractal dimension (FD) can be considered as a reliable marker that describes roughness of protein surface objectively. In this article, we introduce readers to the fundamentals of fractals and present categorical biophysical and geometrical reasons as to why FD-based constructs can describe protein surface roughness more accurately. We then review the commonality (and the lack of it) between numerous approaches that have attempted to investigate protein surface with fractal measures, before exploring the patterns in the results that they have produced. Apart from presenting the genealogy of approaches and results, we present an analysis that quantifies the difference in surface roughness in stretches of protein surface containing the active site, before and after binding to ligands, to underline the utility of FD-based measures further. It has been found that surface stretches containing the active site, in general, undergo a significant increment in its roughness after binding. After presenting the entire repertoire of FD-based surface roughness studies, we talk about two yet-unexplored problems where application of FD-based techniques can help in deciphering underlying patterns of surface interactions. Finally, we list the limitations of FD-based constructs and put down several precautions that one must take while working with them. Copyright (c) 2013 John Wiley \& Sons, Ltd.

}, keywords = {active site roughness, fractal dimension, protein surface roughness, statistical self-similarity, van der Waals contacts}, issn = {0952-3499}, doi = {10.1002/jmr.2264}, author = {Banerji, Anirban and Navare, Charudatta} } @article { ISI:000321541600039, title = {Gas-liquid flow and mass transfer in an advanced-flow reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {52}, number = {26}, year = {2013}, month = {JUL}, pages = {8996-9010}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydrodynamics and mass transfer of gas-liquid flow are explored under ambient conditions in an Advanced-Flow Reactor (AFR), an emerging commercial system designed for continuous manufacture. Carbon dioxide/water is the model system used in this study for a range of flow rates for gas and liquid of 5.6-103 mL/min and 10-80 mL/min, respectively. Bubble size distribution, gas holdup, specific interfacial area, pressure drop, and mass transfer coefficients are determined from flow visualization experiments and compared with conventional gas-liquid contactors. These variables are mainly influenced by the inlet flow rates and inlet composition. Average bubble sizes ((d) over bar (B)) of 0.9-3.8 mm, gas holdup (epsilon(G)) of 0.04-0.68, specific interfacial areas ((a) under bar) of 160-1300 m(2)/m(3), and overall mass transfer coefficients (k(L)(a) under bar) of 0.2-3 s(-1) were obtained for the vertical orientation of the AFR. Although effect of gravity is present for this system, no significant effect on the hydrodynamic properties was observed. The measured pressure drop for vertical orientation (3.6-53.4 kPa) was used to estimate power consumption, which is used as a metric to compare mass transfer efficiency among different gas-liquid contactors. A power law relationship was obtained for the overall mass transfer coefficients in terms of power input and gas holdup, given by kL (a) under bar = 0.101P(w)(0.443)epsilon(0.459)(G). The design of the AFR with a series of heart-shaped confined sections with obstacles enhances continuous breakup and coalescence of bubbles providing interfacial areas and mass transfer coefficients 1 order of magnitude larger than other gas-liquid contactors, such as bubble columns (50-600 m(2)/m(3); 0.005-0.24 s(-1)) and spray columns (75-170 m(2)/m(3); 0.015-0.022 s(-1)), and 1 order of magnitude smaller than gas-liquid microchannels (3400-9000 m(2)/m(3); 0.3-21 s(-1)) or falling film reactors (20,000 m(2)/m(3)).

}, issn = {0888-5885}, doi = {10.1021/ie4011707}, author = {Nieves-Remacha, Maria Jose and Kulkarni, Amol A. and Jensen, Klavs F.} } @article { ISI:000321864300019, title = {In situ growth of metal-organic frameworks on a porous ultrafiltration membrane for gas separation}, journal = {Journal of Materials Chemistry A}, volume = {1}, number = {31}, year = {2013}, month = {MAY}, pages = {8828-8835}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We demonstrate the synthesis of CuBTC and ZIF-8 on a polysulfone based porous asymmetric ultrafiltration (UF) membrane by in situ growth followed by the LBL deposition of crystals without any need for preseeding or surface modification of the membrane. In this way, the top surface of the UF membrane pores is completely covered by MOFs; while the remaining part of the membrane offers a flexible support to the MOFs. The pore apertures of the MOF nanoparticles located at the pore opening of the UF membrane act as channels for the entry of penetrants. The remaining porous sublayer of the membrane carries penetrants on the permeate side without significant resistance. These composite membranes were characterized by PXRD and SEM. The gas permeation study was performed using pure gases of industrial significance (H-2, C3H6 and CO2). The performance of CuBTC@PSF showed enhanced selectivity, of 7.2 and 5.7 for H-2/CO2 and H-2/C3H6 respectively, to that of the pristine PSF membrane.

}, issn = {2050-7488}, doi = {10.1039/c3ta10438a}, author = {Nagaraju, Divya and Bhagat, Deepti G. and Banerjee, Rahul and Kharul, Ulhas K.} } @article { ISI:000312889900035, title = {MuMoD: a bayesian approach to detect multiple modes of protein-DNA binding from genome-wide ChIP data}, journal = {Nucleic Acids Research}, volume = {41}, number = {1}, year = {2013}, month = {JAN}, pages = {21-32}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

High-throughput chromatin immunoprecipitation has become the method of choice for identifying genomic regions bound by a protein. Such regions are then investigated for overrepresented sequence motifs, the assumption being that they must correspond to the binding specificity of the profiled protein. However this approach often fails: many bound regions do not contain the {\textquoteleft}expected{\textquoteright} motif. This is because binding DNA directly at its recognition site is not the only way the protein can cause the region to immunoprecipitate. Its binding specificity can change through association with different co-factors, it can bind DNA indirectly, through intermediaries, or even enforce its function through long-range chromosomal interactions. Conventional motif discovery methods, though largely capable of identifying overrepresented motifs from bound regions, lack the ability to characterize such diverse modes of protein-DNA binding and binding specificities. We present a novel Bayesian method that identifies distinct protein-DNA binding mechanisms without relying on any motif database. The method successfully identifies co-factors of proteins that do not bind DNA directly, such as mediator and p300. It also predicts literature-supported enhancer-promoter interactions. Even for well-studied direct-binding proteins, this method provides compelling evidence for previously uncharacterized dependencies within positions of binding sites, long-range chromosomal interactions and dimerization.

}, issn = {0305-1048}, doi = {10.1093/nar/gks950}, author = {Narlikar, Leelavati} } @article { ISI:000318315100006, title = {Nanostructured crystalline comb polymer of perylenebisimide by directed self-assembly: poly(4-vinylpyridine)-pentadecylphenol perylenebisimide}, journal = {Advanced Functional Materials}, volume = {23}, number = {16}, year = {2013}, month = {APR}, pages = {2033-2043}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Well defined nanostructured polymeric supramolecular assemblies are formed when an asymmetric perylenebisimide substituted with ethylhexyl chains on one end and functionalized with 3-pentadecylphenol at the other termini (PDP-UPBI) is complexed with poly(4-vinylpyridine) (P4VP) via a non-covalent specific interaction such as hydrogen-bonding. The resulting P4VP(PDP-UPBI)(n) complexes are fully solution processable. The bulk structure and morphologies of the supramolecular film studied using small angle and wide angle X-ray scattering reveals highly crystalline nature of the complex. Thin film morphology of the 1:1 complex analyzed using transmission electron microscopy shows uniform lamellar structures in the domain range of 5-10 nm. A clear trend of improved electrical parameters in P4VP(PDP-UPBI) system compared to pristine (PDP-UPBI) is observed from space charge limited current measurements. In short, a simple and facile method to obtain spatially defined organization of n-type semiconductor perylenebisimide molecules using hydrogen bonding interactions with P4VP as the structural motif is showcased herein.

}, issn = {1616-301X}, doi = {10.1002/adfm.201202366}, author = {Narayan, Rekha and Kumar, Prashant and Narayan, K. S. and Asha, S. K.} } @article { ISI:000316969500085, title = {Non-monotonic size dependence of diffusion and levitation effect: a mode-coupling theory analysis}, journal = {Journal of Chemical Physics}, volume = {138}, number = {12}, year = {2013}, month = {MAR}, pages = {124505}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

We present a study of diffusion of small tagged particles in a solvent, using mode coupling theory (MCT) analysis and computer simulations. The study is carried out for various interaction potentials. For the first time, using MCT, it is shown that only for strongly attractive interaction potential with allowing interpenetration between the solute-solvent pair the diffusion exhibits a non-monotonic solute size dependence which has earlier been reported in simulation studies [P. K. Ghorai and S. Yashonath, J. Phys. Chem. B 109, 5824-5835 (2005)]. For weak attractive and repulsive potential the solute size dependence of diffusion shows monotonic behaviour. It is also found that for systems where the interaction potential does not allow solute-solvent interpenetration, the solute cannot explore the neck of the solvent cage. Thus these systems even with strong attractive interaction will never show any non-monotonic size dependence of diffusion. This non-monotonic size dependence of diffusion has earlier been connected to levitation effect [S. Yashonath and P. Santikary, J. Phys. Chem. 98, 6368 (1994)]. We also show that although levitation is a dynamic phenomena, the effect of levitation can be obtained in the static radial distribution function. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4796232]

}, issn = {0021-9606}, doi = {10.1063/1.4796232}, author = {Nandi, Manoj Kumar and Banerjee, Atreyee and Bhattacharyya, Sarika Maitra} } @article { ISI:000314791100023, title = {Novel vanadium n-propylamino phosphate catalyst: synthesis, characterization and applications}, journal = {Materials Research-Ibero-American Journal of Materials}, volume = {16}, number = {1}, year = {2013}, month = {JAN}, pages = {181-189}, publisher = {UNIV FED SAO CARLOS, DEPT ENGENHARIA MATERIALS}, address = {LABORATORIA DE MATERIAIS VITREOS, CAIXA POSTAL 676, SAO CARLOS, 13565-905SP, BRAZIL}, abstract = {

A novel, lamellar type Vanadium n-propylamino phosphate catalyst is synthesized and characterized by using various physicochemical techniques such as Powder X-ray diffraction, Scanning electron microscopy/Energy dispersive X-ray analysis, Thermogravimetry/Differential thermal analysis, Fourier transform Infrared analysis, Electron spin resonance spectroscopy, Ultraviolet - Visible Diffuse reflectance spectroscopy, X-ray Photoelectron spectroscopy, P-31 Magic angle spinning Nuclear Magnetic Resonance spectroscopy and Catalytic applications toward Octahydroquinazolinone synthesis. It is found that the n-propylamine is present as sandwich between Vanadyl phosphate layers. Most of the Vanadium is present as V4+ ions in tetrahedral co-ordination. Vanadium n-propylamino phosphate catalyses Octahydroquinazolinone synthesis more effeciently and the optimum conditions required for Octahydroquinazolinone synthesis are, Benzaldehyde (2 mmol), Dimedone (2 mmol), Urea (4 mmol), Methanol + Water (1:1, 5 mL) and Catalyst (0.05 g). A plausible mechanism is also proposed.

}, keywords = {n-propylamino phosphate, octahydroquinazolinones, synthesis, Vanadium}, issn = {1516-1439}, doi = {10.1590/S1516-14392012005000161}, author = {Anumula, Rajini and Nookaraju, Muralasetti and Selvaraj, Kaliaperumal and Reddy, Ingala Ajit Kumar and Narayanan, Venkatathri} } @article { ISI:000313694200024, title = {One pot solvent free synthesis and in vitro antitubercular screening of 3-aracylphthalides against mycobacterium tuberculosis}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {23}, number = {3}, year = {2013}, month = {FEB}, pages = {711-714}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

One pot synthesis of 3-Aracylphthalide was accomplished in good yield by reacting 2-carboxy benzaldehyde with various aromatic methyl ketones in presence of methane sulphonic acid. Various phthalides thus obtained were characterized with spectral techniques. These phthalides were subjected to in vitro antitubercular screening against Mycobacterium tuberculosis H37Ra (MTB) by using XRMA protocol. Among the phthalides screened, four exhibited half maximal inhibitory concentration (IC50) in the range of 0.81-1.24 mu g/ml thereby providing potential lead compounds for future drug discovery studies. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {3-Aracylphthalide, Antitubercular activity, Methane sulphonic acid, One pot synthesis}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2012.11.097}, author = {Limaye, Rohan A. and Kumbhar, Virendra B. and Natu, Arun D. and Paradkar, Madhusudan V. and Honmore, Varsha S. and Chauhan, Rubia R. and Gample, Suvarna P. and Sarkar, Dhiman} } @article { ISI:000316351800012, title = {One size does not fit all: on how markov model order dictates performance of genomic sequence analyses}, journal = {Nucleic Acids Research}, volume = {41}, number = {3}, year = {2013}, month = {FEB}, pages = {1416-1424}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

The structural simplicity and ability to capture serial correlations make Markov models a popular modeling choice in several genomic analyses, such as identification of motifs, genes and regulatory elements. A critical, yet relatively unexplored, issue is the determination of the order of the Markov model. Most biological applications use a predetermined order for all data sets indiscriminately. Here, we show the vast variation in the performance of such applications with the order. To identify the {\textquoteleft}optimal{\textquoteright} order, we investigated two model selection criteria: Akaike information criterion and Bayesian information criterion (BIC). The BIC optimal order delivers the best performance for mammalian phylogeny reconstruction and motif discovery. Importantly, this order is different from orders typically used by many tools, suggesting that a simple additional step determining this order can significantly improve results. Further, we describe a novel classification approach based on BIC optimal Markov models to predict functionality of tissue-specific promoters. Our classifier discriminates between promoters active across 12 different tissues with remarkable accuracy, yielding 3 times the precision expected by chance. Application to the metagenomics problem of identifying the taxum from a short DNA fragment yields accuracies at least as high as the more complex mainstream methodologies, while retaining conceptual and computational simplicity.

}, issn = {0305-1048}, doi = {10.1093/nar/gks1285}, author = {Narlikar, Leelavati and Mehta, Nidhi and Galande, Sanjeev and Arjunwadkar, Mihir} } @article { ISI:000315370000010, title = {Polyproline fold-In imparting kinetic stability to an alkaline serine endopeptidase}, journal = {Biochimica Et Biophysica Acta-Proteins and Proteomics}, volume = {1834}, number = {3}, year = {2013}, month = {MAR}, pages = {708-716}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Polyproline II (PPII) fold, an unusual structural element was detected in the serine protease from Nocardiopsis sp. NCIM 5124 (NprotI) based on far UV circular dichroism spectrum, structural transitions of the enzyme in presence of GdnHCl and a distinct isodichroic point in chemical and thermal denaturation. The functional activity and conformational transitions of the enzyme were studied under various denaturing conditions. Enzymatic activity of NprotI was stable in the vicinity of GdnHCl upto 6.0 M concentration, organic solvents viz, methanol, ethanol, propanol (all 90\% v/v), acetonitrile (75\% v/v) and proteases such as trypsin, chymottypsin and proteinase K (NprotI:protease 10:1). NprotI seems to be a kinetically stable protease with a high energy barrier between folded and unfolded states. Also, an enhancement in the activity of the enzyme was observed in 1 M GdnHCl upto 8 h, in organic solvents (75\% v/v) for 72 h and in presence of proteolytic enzymes. The polyproline fold remained unaltered or became more prominent under the above mentioned conditions. However, it diminished gradually during thermal denaturation above 60 degrees C. Thermal transition studies by differential scanning calorimetry (DSC) showed scan rate dependence as well as irreversibility of denaturation, the properties characteristic of kinetically stable proteins. This is the first report of PPII helix being the global conformation of a non structural protein, an alkaline serine protease, from a microbial source, imparting kinetic stability to the protein. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Conformation, differential scanning calorimetry, Kinetic stability, Nocardiopsis sp., Polyproline fold, Serine protease}, issn = {1570-9639}, doi = {10.1016/j.bbapap.2012.12.007}, author = {Rohamare, Sonali B. and Dixit, Vaishali and Nareddy, Pavan Kumar and Sivaramakrishna, D. and Swamy, Musti J. and Gaikwad, Sushama M.} } @article { ISI:000325642800010, title = {Production, purification and characterization of cholesterol oxidase from a newly isolated streptomyces sp.}, journal = {World Journal of Microbiology \& Biotechnology}, volume = {29}, number = {11}, year = {2013}, month = {NOV}, pages = {2077-2085}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Cholesterol oxidase production (COD) by a new isolate characterized as Streptomyces sp. was studied in different production media and fermentation conditions. Individual supplementation of 1 \% maltose, lactose, sucrose, peptone, soybean meal and yeast extract enhanced COD production by 80-110 \% in comparison to the basal production medium (2.4 U/ml). Supplementation of 0.05 \% cholesterol (inducer) enhanced COD production by 150 \%. COD was purified 14.3-fold and its molecular weight was found to be 62 kDa. V-max (21.93 mu M/min mg) and substrate affinity K-m (101.3 mu M) suggested high affinity of the COD for cholesterol. In presence of Ba2+ and Hg2+ the enzyme activity was inhibited while Cu2+ enhanced the activity nearly threefold. Relative activity of the enzyme was found maximum in triton X-100 whereas sodium dodecyl sulfate inactivated the enzyme. The enzyme activity was also inhibited by the thiol-reducing reagents like Dithiothreitol and beta-mercaptoethanol. The COD showed moderate stability towards all organic solvents except acetone, benzene and chloroform. The activity increased in presence of isopropanol and ethanol. The enzyme was most active at pH 7 and 37 A degrees C temperature. This organism is not reported to produce COD.

}, keywords = {Affinity chromatography, Cholesterol oxidase, HPLC, SDS PAGE, Streptomyces sp.}, issn = {0959-3993}, doi = {10.1007/s11274-013-1371-8}, author = {Niwas, Ram and Singh, Vineeta and Singh, Rajbir and Tripathi, Divya and Tripathi, C. K. M.} } @article { ISI:000318213800029, title = {Promising stability of gold-based catalysts prepared by direct anionic exchange for DeNO (x) applications in lean burn conditions}, journal = {Topics in Catalysis}, volume = {56}, number = {1-8}, year = {2013}, note = {9th International Congress on Catalysis and Automotive Pollution Control (CAPoC), Brussels, BELGIUM, AUG 29-31, 2012}, month = {MAY}, pages = {157-164}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Supported gold catalysts on gamma-Al2O3 have been investigated in the catalytic reduction of NO (x) in simulated Diesel exhaust gas conditions. Different parameters have been examined essentially the mode of gold incorporation via classical deposition-precipitation and anionic exchange methods and the nature of the pre-activation thermal treatment. The resistance to thermal ageing under reactive conditions at 500 A degrees C was found completely different with a significant rate enhancement on anionic-exchange samples. Further comparisons also show that the nature of the pre-activation thermal treatment influences the extent of surface reconstructions during thermal ageing with a detrimental effect of reductive pre-treatment on the catalytic performances.

}, keywords = {Anionic-exchange, Au/Al2O3 catalyst, Deposition-precipitation, NOx abatement, Selective catalytic reduction}, issn = {1022-5528}, doi = {10.1007/s11244-013-9946-z}, author = {Nguyen, D. -L. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Lancelot, Christine and Girardon, J. S. and Dujardin, Christophe and Granger, P.} } @article {42741, title = {Rational design of highly active {\textquotedblleft}hybrid{\textquotedblright} phosphine-phosphinite pincer iridium catalysts for alkane metathesis}, journal = {ACS Catalysis}, volume = {3}, year = {2013}, month = {SEP}, pages = {2505{\textendash}2514}, abstract = {

Both the bisphosphine and bisphosphinite pincer complexes (tBu4PCP)IrH2 and (tBu4POCOP)IrH2 can cocatalyze alkane metathesis in tandem with olefin metathesis catalysts, but the two complexes have different resting states during catalysis, suggesting that different steps are turnover-limiting in each case. This led to the hypothesis that a complex with intermediate properties would be catalytically more active than either of these two species. Accordingly, {\textquotedblleft}hybrid{\textquotedblright} phosphine{\textendash}phosphinite pincer ligands (PCOP) and the corresponding iridium complexes were synthesized (3c{\textendash}e). In tandem with olefin-metathesis catalyst MoF12, (tBu4PCOP)IrH2 displays significantly higher activity for the metathesis of n-hexane than does (tBu4PCP)IrH2 or (tBu4POCOP)IrH2. (tBu2PCOPiPr2)IrH4 (3d) is even more active (\>30-fold more active than (tBu4POCOP)IrH2) and affords nearly 4.6 M alkane products after 8 h at 125 {\textdegree}C.

}, doi = {10.1021/cs400624c}, author = {Nawara-Hultzsch, Agnieszka J. and Hackenberg, Jason D. and Punji, Benudhar and Supplee, Carolyn and Emge, Thomas J. and Bailey, Brad C. and Schrock, Richard R. and Brookhart, Maurice and Goldman, Alan S.} } @article { ISI:000324223600112, title = {Response to the comments on {\textquoteleft}Investigations on Ru doped ZnO: strain calculations and gas sensing study{\textquoteright}}, journal = {Sensors and Actuators B-Chemical}, volume = {186}, year = {2013}, month = {SEP}, pages = {826}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, issn = {0925-4005}, doi = {10.1016/j.snb.2013.05.089}, author = {Navale, Shalaka C. and Ravi, V. and Mulla, Imtiaz S.} } @article { ISI:000326049600003, title = {Rheology and microstructural studies of regenerated silk fibroin solutions}, journal = {Rheologica Acta}, volume = {52}, number = {10-12}, year = {2013}, month = {NOV}, pages = {833-840}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Regenerated silk fibroin solutions (RSF) are produced by dissolving degummed silk fibers in water. We have observed that RSF solutions at a concentration less than 15 \% by weight exhibit an unusual gel-like response in conventional shear rheology measurements. At higher concentrations, the response is predominantly viscous (or liquid-like). We have probed this counterintuitive behavior of silk fibroin solutions by using microrheology, and interfacial rheometry. Scattering techniques were also used to understand the microstructure of RSF solutions as a function of the concentration. Our studies suggest that the gel-like response of the RSF solution may result from the formation of an interfacial film at the air-solution interface, which dominates the bulk rheological response.

}, keywords = {Interfacial rheology, Microrheology, Rheology, Silk}, issn = {0035-4511}, doi = {10.1007/s00397-013-0723-5}, author = {Nisal, Anuya and Kalelkar, Chirag and Bellare, Jayesh R. and Lele, Ashish K.} } @article {43289, title = {Self-assembly to function: design, synthesis and broad spectrum antimicrobial properties of short hybrid E-vinylogous lipopeptides}, journal = {Journal of Medicinal Chemistry}, volume = {56}, year = {2013}, month = {NOV}, pages = {8468-8474}, abstract = {Nonribosomal E-vinylogous gamma-amino acids are widely present in many peptide natural products and have been exploited as inhibitors for serine and cysteine proteases. Here, we are reporting the broad spectrum antimicrobial properties and self-assembled nanostructures of various hybrid lipopeptides composed of 1:1 alternating alpha-and E-vinylogous residues. Analysis of the results revealed that self-assembled nanostructures also play a significant role in the antimicrobial and hemolytic activities. In contrast to the alpha-peptide counterparts, vinylogous hybrid peptides displayed excellent antimicrobial properties against various bacterial and fungal strains. Peptides that adopted nanofiber structures displayed less hemolytic activity, while peptides that adopted nanoneedle structures displayed the highest hemolytic activity.}, doi = {10.1021/jm400884w}, author = {Shankar, S. Shiva and Benke, Sushil N. and Nagendra, Narem and Srivastava, Prabhakar Lal and Thulasiram, Hirekodathakallu V. and Gopi, Hosahudya N.} } @article { ISI:000323763000015, title = {Solvent-induced self-assembly of hydrogen bonded P4VP-perylenebisimide comb polymer}, journal = {Journal of Materials Chemistry C}, volume = {1}, number = {37}, year = {2013}, month = {JUL}, pages = {5925-5934}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Polymeric supramolecular assemblies were formed when an unsymmetric perylenebisimide substituted with ethylhexyl chains on one end and functionalized with 3-pentadecylphenol at the other termini (PDP-UPBI) was complexed with poly(4-vinylpyridine) (P4VP) via hydrogen-bonding interaction. The self-assembly behavior of this polymeric supramolecule poly(4-vinylpyridine)-perylenebisimide P4VP(PDP-UPBI)(1.0) was studied in solvents of varying polarity like chloroform (CHCl3) and methylcyclohexane (MCH). Variable concentration and variable temperature proton NMR studies in CDCl3 and deuterated 1,1,2,2-tetrachloroethane (TCE), respectively, revealed the polymeric nature of the perylenebisimide upon complexation and the high thermal stability of the self organized structures in solution. The improved solubility afforded by the complexation enabled variable temperature UV-Vis absorption studies in the non-polar solvent MCH, which indicated the existence of strong face-to-face stacked H-type aggregates. The strong fluorescence quenching in MCH also supported the identification of the nature of aggregates as co-facial H-type. Although the existence of aggregates was not very evident in dilute solutions of chloroform, the fluorescence of the P4VP(PDP-UPBI) 1.0 was quenched compared to that of PDP-UPBI. Thin spin coated films of the complex from chloroform exhibited features of rotationally displaced H-type aggregates characterized by blue shift of absorption maxima and the appearance of a new red shifted peak at 540 nm with weak aggregate emission beyond 600 nm. Morphology analysis of drop cast samples using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the formation of micrometer long multilamellar nanofibers from CHCl3 and two dimensional multilamellar nanosheets upon switching the solvent to MCH.

}, issn = {2050-7526}, doi = {10.1039/c3tc31015a}, author = {Narayan, Rekha and Asha, S. K.} } @article { ISI:000318634000040, title = {Structural variations of D-pi-A dyes influence on the photovoltaic performance of dye-sensitized solar cells}, journal = {RSC Advances}, volume = {3}, number = {21}, year = {2013}, month = {MAR}, pages = {7921-7927}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two new organic D-pi-A dyes containing identical pi-conjugated spacer and anchoring/acceptor moieties but different donor groups were designed and synthesized. These dyes containing didodecylcyclopentadithiophene (CPDT) as a spacer, cyanoacrylic acid as an acceptor and N-butyl-carbazole or N-butyl-phenothiazine moieties as electron donor groups are labelled as V4 and V11 dyes, respectively. The variation in the donor group of these two dyes, that influences the photophysical, electrochemical and photovoltaic parameters, was investigated. The highest photovoltaic conversion efficiency of 7.5\% was obtained with V4 dye at AM 1.5 G full sunlight intensity (100 mWcm(-2)). Comparison of phenothiazine donor dyes with two different pi-conjugated spacers, CPDT (V11) and vinyl thiophene (V7) containing devices shows that the V-oc of V7 dye is lower than that of V11 due to the downward shift of the conduction band edge. Transient photovoltage and electrochemical impedance spectroscopy measurements were performed to explain the differences in the PV parameters by varying the donors and/or spacer groups.

}, issn = {2046-2069}, doi = {10.1039/c3ra22249g}, author = {Marszalek, Magdalena and Nagane, Satyawan and Ichake, Amol and Humphry-Baker, Robin and Paul, Vincent and Zakeeruddin, Shaik M. and Gratzel, Michael} } @article { ISI:000327521300003, title = {Superior field emission properties of layered WS2-RGO nanocomposites}, journal = {Scientific Reports}, volume = {3}, year = {2013}, month = {NOV}, pages = {3282}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

We report here the field emission studies of a layered WS2-RGO composite at the base pressure of similar to 1 x 10(-8) mbar. The turn on field required to draw a field emission current density of 1 mu A/cm(2) is found to be 3.5, 2.3 and 2 V/mu m for WS2, RGO and the WS2-RGO composite respectively. The enhanced field emission behavior observed for the WS2-RGO nanocomposite is attributed to a high field enhancement factor of 2978, which is associated with the surface protrusions of the single-to-few layer thick sheets of the nanocomposite. The highest current density of similar to 800 mu A/cm(2) is drawn at an applied field of 4.1 V/mu m from a few layers of the WS2-RGO nanocomposite. Furthermore, first-principles density functional calculations suggest that the enhanced field emission may also be due to an overalp of the electronic structures of WS2 and RGO, where graphene-like states are dumped in the region of the WS2 fundamental gap.

}, issn = {2045-2322}, doi = {10.1038/srep03282}, author = {Rout, Chandra Sekhar and Joshi, Padmashree D. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Simbeck, Adam J. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @article { ISI:000323401200004, title = {Synthesis and fluorescence properties of a full set of extended RNA base analogues}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {52}, number = {8-9, SI}, year = {2013}, month = {AUG}, pages = {1004-1013}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

The synthesis and photophysical characterization of a complete set of fluorescent RNA base analogues derived by conjugating benzofuran moiety at the 5- and 8-positions of pyrimidine and purine bases, respectively, are described. Benzofuran-modified pyrimidine and purine ribonucleoside analogues exhibit Contrasting fluorescence properties. Pyrimidine analogues are moderately emissive with emission maximum in the visible region, and importantly, are highly sensitive to solvent polarity and Viscosity changes. On the other hand, purine analogues are highly emissive and are minimally affected by solvation. and viscosity effects. Thorough photophysical analysis reveals that the pyrimidine and purine ribonucleosides displaying distinct and-probe-like fluorescence properties could be useful in designing nucleic acid based biophysical tools to study nucleic acid structure and function.

}, keywords = {Environment sensitive probes, Fluorescence probes, Fluorescence spectroscopy, Nucleic acids, Ribonucleoside analogues}, issn = {0376-4710}, author = {Sabale, Pramod M. and Nuthanakanti, Ashok and Srivatsan, Seergazhi G.} } @article {42807, title = {Synthesis of C(27){\textendash}C(38) fragment of aflastatin A}, journal = {Tetrahedron}, volume = {69}, year = {2013}, month = {JAN}, pages = {1830{\textendash}1840}, abstract = {

Efforts at finding out a strategy for the synthesis of the densely hydroxylated C(27){\textendash}C(48) fragment of aflastatin A have been described. The initial studies dealing with alkyne{\textendash}epoxide coupling using a linear polyol epoxide resulted in a debenzylative cycloetherification leading to a C-arabinoside derivative. This problem has been addressed by applying an epoxide pendant on a furanosyl unit. With the model alkyne, the epoxide{\textendash}alkyne coupling proceeded smoothly. Subsequently, following a sequence of [Pd]-mediated alkynone cycloisomerization/stereoselective hydroboration{\textendash}oxidation, the synthesis of the central C(27){\textendash}C(38) fragment has been executed. When employed, the original C(33){\textendash}C(48) alkyne, the coupling and the cycloisomerizations are facile. However, the resulting glycals are unstable, thus warranting a revision in our approach.

}, keywords = {Aflastatin; Epoxide{\textendash}alkyne coupling; ω-Alkynone cycloisomerization; Palladium catalysis; Hydroboration}, doi = {10.1016/j.tet.2012.12.065}, author = {Narute, Sachin B. and Ramana, C.V.} } @article { ISI:000326290300011, title = {Synthesis of C-disaccharides through a one-pot alkynol cycloisomerization-reductive deoxygenation}, journal = {Chemistry-A European Journal}, volume = {19}, number = {45}, year = {2013}, month = {NOV}, pages = {15109-15114}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, keywords = {C-disaccharides, carbohydrates, Epoxide-alkyne coupling, Gold catalysis, Reductive deoxygenation}, issn = {0947-6539}, doi = {10.1002/chem.201302252}, author = {Narute, Sachin B. and Rout, Jeetendra Kumar and Ramana, Chepuri V.} } @article { ISI:000323019400017, title = {Synthetic zipper peptide motif orchestrated via co-operative interplay of hydrogen bonding, aromatic stacking, and backbone chirality}, journal = {Journal of the American Chemical Society}, volume = {135}, number = {31}, year = {2013}, month = {AUG}, pages = {11477-11480}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Here, we report on a new class of synthetic zipper peptide which assumes its three-dimensional zipper-like structure via a co-operative interplay of hydrogen bonding, aromatic stacking, and backbone chirality. Structural studies carried out in both solid- and solution-state confirmed the zipper-like structural architecture assumed by the synthetic peptide which makes use of unusually remote inter-residual hydrogen-bonding and aromatic stacking interactions to attain its shape. The effect of chirality modulation and the extent of noncovalent forces in the structure stabilization have also been comprehensively explored via single-crystal X-ray diffraction and solution-state NMR studies. The results highlight the utility of noncovalent forces in engineering complex synthetic molecules with intriguing structural architectures.

}, issn = {0002-7863}, doi = {10.1021/ja405455g}, author = {Nair, Roshna V. and Kheria, Sanjeev and Rayavarapu, Suresh and Kotmale, Amol S. and Jagadeesh, Bharatam and Gonnade, Rajesh G. and Puranik, Vedavati G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000327418000001, title = {Unusual salting effects in ionic liquid solutions}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {52}, number = {11}, year = {2013}, month = {NOV}, pages = {1377-1382}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

Unusual salting effects of salting-out agents like LiCl and NaCl and salting-in agents like LiClO4 and NaClO4 in ionic liquid solutions are reported. It is observed that the salting behavior in water can be altered in the presence of ionic liquids. It is demonstrated that the salting-in agents in the presence of the ionic liquids with higher alkyl chain can display unusual fall and rise in the viscosity of the systems. On the other hand, no change in the behavior of the salting-out agents is noted in these ionic liquids. A tentative explanation is proposed for the observed viscosity data in these systems.

}, keywords = {Cationic ring, ionic liquids, Salting effects, viscosity}, issn = {0376-4710}, author = {Nanda, Raju and Kumar, Anil} } @article { ISI:000322293300006, title = {Use of amino acids for a highly efficient somatic embryogenesis in grapevine {\textquoteleft}Crimson Seedless{\textquoteright}}, journal = {Vitis}, volume = {52}, number = {3}, year = {2013}, month = {JAN}, pages = {137-140}, publisher = {JKI-INSTITUT REBENZUCHTUNG}, address = {GEILWEILERHOF, D-76833 SIEBELDINGEN, GERMANY}, abstract = {

Somatic embryogenesis influenced by growth regulators and amino acids was studied in in vitro leaves of grapevine {\textquoteleft}Crimson Seedless{\textquoteright}. In vitro leaves of the cultivar were collected from multiple shoot cultures maintained on Murashige and Skoog{\textquoteright}s (MS) basal medium supplemented with 9 mu M N-6-benzyladenine (BA). Among the growth regulators used, BA at 4.5 mu M induced higher embryogenic response producing more number of somatic embryos per explant. This response was increased with the addition of 5 mu M naphthoxyl-acetic acid (NOA) to 1/2 MS containing 4.5 mu M BA. Further, supplementation of amino acids in the callus induction medium significantly improved the embryogenic response of in vitro leaves. The higher number of explants showing somatic embryo production (55.3 \%) and higher number of somatic embryos per explant (15.5 per explant) were recorded with the supplementation of 5 mM phenylalanine to callus induction medium. Primary somatic embryos showed repetitive embryogenesis on \% MS medium devoid of growth regulators. Plantlets derived from somatic embryos were transferred to soil-sand-peat mixture (1:1:1 v/v) and hardened plantlets were established in greenhouse with 90 \% survival. This somatic embryogenesis system has been successfully used for Agrobacterium-mediated transformation studies in {\textquoteleft}Crimson Seedless{\textquoteright} in our laboratory. To our knowledge, this is the first report on the use of amino acids for the high efficient somatic embryogenesis in grapevine.

}, keywords = {Amino acids, somatic embryogenesis, Vitis vinifera L., {\textquoteleft}Crimson Seedless{\textquoteright}}, issn = {0042-7500}, author = {Nookaraju, A. and Agrawal, Dinesh C.} } @article { ISI:000334599800029, title = {Anti-cancer therapeutic potential of quinazoline based small molecules via global upregulation of miRNAs}, journal = {Chemical Communications}, volume = {50}, number = {35}, year = {2014}, month = {MAR}, pages = {4639-4642}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Three quinazoline based small molecules showed global upregulation of miRNA expression with a selective enrichment of tumor suppressor miRNAs. The target genes of the upregulated miRNAs were predicted to be enriched for apoptotic pathways. Apoptotic induction following treatment with quinazoline compounds was confirmed by in cellulo studies. Thus, these small molecules having the core structural moiety (2,4-diphenyl-quinazoline) can be used as scaffolds to design activators of miRNA expression paving the way for novel anti-cancer drugs.

}, issn = {1359-7345}, doi = {10.1039/c3cc49337g}, author = {Nahar, Smita and Bose, Debojit and Panja, Sumit Kumar and Saha, Satyen and Maiti, Souvik} } @article {43392, title = {Antimicrobial activity of ZnO nanoparticles against pathogenic bacteria and fungi}, journal = {JSM Nanotechnology and Nanomedicine}, volume = {2}, year = {2014}, month = {JAN}, pages = {1-7}, author = {Navale, G. R. and Thripuranthaka, M. and Late, Dattatray J. and Shinde, Sandip S.} } @article {43379, title = {Aptamer functionalized multifunctional fluorescent nanotheranostic platform for pancreatic cancer}, journal = {Journal of Nanopharm Drug Delivery}, year = {2014}, month = {DEC}, abstract = {This study explores the potential of aptamer functionalized and fluorescent silver nanoparticles (AgNPs) labeled human serum albumin nanoparticles for drug delivery and bioimaging. Nanotechnology is certainly the most promising research arena in recent years and different fields of biotechnology, medicine and agricultural have been deeply benefited by the enormous advantages of nanotechnology. In recent years, synthesis of nanoparticles via eco-friendly methods has attained a lot of interest and silver nanoparticles are synthesized extensively due to their size tunable properties and vast applicability in different areas. In this study we have explored green synthesized fluorescent silver nanoparticles as a novel bioimaging agent for pancreatic cancer. Capsaicin, a plant phytochemical found in red chilli pepper was encapsulated in aptamer MUC-1 coupled albumin nanoparticles and it was observed that the nanoformulation significantly enhanced the bioavailability and sustained release property of the drug to pancreatic cancer cells in-vitro. Meanwhile AgNPs mediated excellent bioimaging has enhanced the efficacy of our system as drug delivery vehicle.}, doi = {10.1166/jnd.2014.1070}, author = {Nigam, Preeti and Waghmode, Shobha A. and Yeware, Amar M. and Nawale, Laxman U. and Dagde, Priyanka and Dudhane, Amol and Sarkar, Dhiman} } @article { ISI:000340703000039, title = {CH3NH3PbI(3-x)(BF4)(x): molecular ion substituted hybrid perovskite}, journal = {Chemical Communications}, volume = {50}, number = {68}, year = {2014}, month = {SEP}, pages = {9741-9744}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A molecular ion (BF4-) substituted hybrid perovskite CH3NH3PbI(3-x)(BF4)(x) is synthesized. The substituted perovskite shows significant enhancement in electrical conductivity at low frequencies and improved photoresponse under AM1.5 illumination as compared to the perovskite (CH3NH3PbI3).

}, issn = {1359-7345}, doi = {10.1039/C4CC04537H}, author = {Nagane, Satyawan and Bansode, Umesh P. and Game, Onkar S. and Chhatre, Shraddha and Ogale, Satishchandra} } @article { ISI:000332028200016, title = {Chiral poly(L-lactic acid) driven helical self-assembly of oligo(p-phenylenevinylene)}, journal = {Journal of Materials Chemistry C}, volume = {2}, number = {11}, year = {2014}, month = {MAR}, pages = {2051-2060}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The synthesis and self-assembly of a series of copolyesters incorporating varying mol ratios of an achiral oligo(p-phenylenevinylene) (OPV) into the backbone of a chiral poly(L-lactic acid) (PLLA) via high temperature solution blending is reported. The polymers were characterized by H-1 NMR spectroscopy and size exclusion chromatography (SEC) and their bulk properties were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WXRD). The DSC and WXRD analyses confirmed the crystallinity and pi-pi stacking of the OPV units in the PLLA-OPV copolyester. Absorption, emission and lifetime-decay studies showed that the OPV chromophore was highly aggregated in the solid state. The solid powder samples of the copolyesters exhibited an intense, red shifted aggregate emission beyond 470 nm. Circular dichroism (CD) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies revealed that the PLLA-OPV copolyester formed a self-assembled architecture, in which the helical organization of the achiral OPV segments was dictated by the chiral PLLA segments. The observed CD signal and AFM image accounted for the right-handed helical self-assembly of the OPV chromophore in the solid state. These results confirmed the effect of the chiral PLLA segment on tuning the OPV chromophore packing and supramolecular chirality in molecular aggregates. The methodology illustrated here provides opportunities for the design of a new class of hierarchical, self-assembled architectures, based on organic pi-conjugated materials and the manipulation of their optical properties.

}, issn = {2050-7526}, doi = {10.1039/c3tc32241f}, author = {Nisha, S. Kumari and Asha, S. K.} } @article { ISI:000340872300007, title = {Clay-supported copper nitrate (Claycop): a mild reagent for the selective nitration of aromatic olefins}, journal = {Synlett}, volume = {25}, number = {14}, year = {2014}, month = {SEP}, pages = {1997-2000}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A straightforward and highly selective method has been developed for the nitration of a wide variety of aromatic and aliphatic olefins by using a clay-supported copper nitrate (Claycop) and a catalytic amount of (2,2,6,6-tetramethylpiperidin-1-yl)oxyl, an inexpensive and mild reagent system. High conversions and exclusive E-selectivity, together with the environmentally benign nature of the Claycop reagent, make this a green method and an attractive alternative to established methods.

}, keywords = {alkenes, nitrations}, issn = {0936-5214}, doi = {10.1055/s-0034-1378513}, author = {Begari, Eeshwaraiah and Singh, Chandani and Nookaraju, U. and Kumar, Pradeep} } @article {46380, title = {Crystal engineering principles: fluoroquinolone salts}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {APR}, pages = {C413}, type = {Meeting Abstract}, keywords = {ciprofloxacin, Fluoroquinolone, norfloxacin}, issn = {2053-2733}, author = {Dandela, Rambabu and Nangia, Ashwini} } @proceedings {43316, title = {Design and engineering of organic molecules for customizable terahertz tags}, volume = {8985}, year = {2014}, month = {FEB}, pages = {Article Number: UNSP 89850P}, publisher = {SPIE-Int Soc Optical Engineering, 1000 20th ST, PO Box 10, Bellingham, WA 98227-0010 USA}, address = {San Francisco, CA}, abstract = {

Terahertz (THz) frequency band lies between the microwave and infrared region of the electromagnetic spectrum. Molecules having strong resonances in this frequency range are ideal for realizing "Terahertz tags" which can be easily incorporated into various materials. THz spectroscopy of molecules, especially at frequencies below 10 THz, provides valuable information on the low frequency vibrational modes, viz. intermolecular vibrational modes, hydrogen bond stretching, torsional vibrations in several chemical and biological compounds. So far there have been very few attempts to engineer molecules which can demonstrate customizable resonances in the THz frequency region. In this paper, Diamidopyridine (DAP) based molecules are used as a model system to demonstrate engineering of THz resonances (\< 10 THz) by fine-tuning the molecular mass and bond strengths. Density Functional Theory (DFT) simulations have been carried out to explain the origin of THz resonances and factors contributing to the shift in resonances due to the addition of various functional groups. The design approach presented here can be easily extended to engineer various organic molecules suitable for THz tags application.

}, doi = {10.1117/12.2041194}, author = {Ray, Shaumik and Dash, Jyotirmayee and Nallappan, Kathirvel and Kaware, Vaibhav and Basutkar, Nitin and Ambade, Ashootosh and Joshi, Kavita and Pesala, Bala} } @article { ISI:000328665300008, title = {Effect of SnO2/Al2O3 ratio of Si-based MFI on its acidity and hydrophobicity: application in selective hydroxyalkylation of p-cresol}, journal = {Catalysis Communications}, volume = {44}, number = {SI}, year = {2014}, month = {JAN}, pages = {29-34}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Silica based MR type molecular sieves with various SnO2/Al2O3 ratios were synthesized from gels having molar compositions SiO2:xSnO(2):yAl(2)O(3):0.23(TPA)(2)O:35H(2)O where 0 \<= x \<= 0.02 and 0 \<= y \<= 0.01. Recyclable, Al-free Sn-MFI catalyst showed 31\% conversion of formaldehyde with 100\% selectivity to 2,2{\textquoteright}-methylenebis(4-methylphenol) in hydroxyalkylation of p-cresol with formaldehyde on account of moderate acidity and higher hydrophobicity. (C) 2013 Elsevier B.A. All rights reserved.

}, keywords = {Al-27 MAS NMR, Hydroxyalkylation, Molecular sieves, p-Cresol, Stannosilicate}, issn = {1566-7367}, doi = {10.1016/j.catcom.2013.08.002}, author = {Garade, Ajit C. and Malwadkar, A. V. and Niphadkar, P. S. and Jha, Ratnesh Kumar and Joshi, P. N. and Rode, C. V.} } @conference {46368, title = {Electrokinetic properties of PMAA functionalized NiFe2O4 nanoparticles synthesized by thermal plasma route}, booktitle = {Solid State Physics: Proceedings of the 58th Dae Solid State Physics Symposium 2013, PTS A \& B}, year = {2014}, month = {DEC}, publisher = {Board Res Nucl Sci; Dept Atom Energy; Govt India}, organization = {Board Res Nucl Sci; Dept Atom Energy; Govt India}, address = {2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA}, abstract = {

The magnetic nickel ferrite (NiFe2O4) nanoparticles with an average size of 30nm were synthesised by Transferred arc DC Thermal Plasma route. The synthesized nickel ferrite nanoparticles were characterized by TEM and FTIR techniques. The synthesized nickel ferrite nanoparticles were further functionalized with PMAA (polymethacrylic acid) by self emulsion polymerization method and subsequently were characterized by FTIR and Zeta Analyzer. The variation of zeta potential with pH was systematically studied for both PMAA functionalized (PNFO) and uncoated nickel ferrite nanoparticles (NFO). The IEP (isoelectric points) for PNFO and NFO was determined from the graph of zeta potential vs pH. It was observed that the IEP for NFO was at 7.20 and for PNFO it was 2.52. The decrease in IEP of PNFO was attributed to the COOH functional group of PMAA.

}, keywords = {IEP, NiFe2O4, PMAA, Thermal plasma, Zeta potential}, isbn = {978-0-7354-1225-5}, doi = {10.1063/14873080}, author = {Bhosale, Shivaji V. and Mhaske, Pravin and Kanhe, N. and Navale, A. B. and Bhoraskar, S. V. and Mathe, V. L. and Bhatt, S. K.}, editor = {Murli, C and Bhattacharyya, D and Gadkari, SC} } @article { ISI:000341152600073, title = {Enhanced field emission properties of doped graphene nanosheets with layered SnS2}, journal = {Applied Physics Letters}, volume = {105}, number = {4}, year = {2014}, month = {JUL}, pages = {043109}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

We report here our experimental investigations on p-doped graphene using tin sulfide (SnS2), which shows enhanced field emission properties. The turn on field required to draw an emission current density of 1 mu A/cm(2) is significantly low (almost half the value) for the SnS2/reduced graphene oxide (RGO) nanocomposite (2.65 V/mu m) compared to pristine SnS2 (4.8 V/mu m) nanosheets. The field enhancement factor beta (similar to 3200 for the SnS2 and similar to 3700 for SnS2/RGO composite) was calculated from Fowler-Nordheim (F-N) plots, which indicates that the emission is from the nanometric geometry of the emitter. The field emission current versus time plot shows overall good emission stability for the SnS2/RGO emitter. The magnitude of work function of SnS2 and a SnS2/graphene composite has been calculated from first principles density functional theory (DFT) and is found to be 6.89 eV and 5.42 eV, respectively. The DFT calculations clearly reveal that the enhanced field emission properties of SnS2/RGO are due to a substantial lowering of the work function of SnS2 when supported by graphene, which is in response to p-type doping of graphene. (C) 2014 AIP Publishing LLC.

}, issn = {0003-6951}, doi = {10.1063/1.4892001}, author = {Rout, Chandra Sekhar and Joshi, Padmashree D. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Simbeck, Adam J. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @article { ISI:000328527000041, title = {Esterification of levulinic acid to ethyl levulinate over bimodal micro-mesoporous H/BEA zeolite derivatives}, journal = {Catalysis Communications}, volume = {43}, year = {2014}, month = {JAN}, pages = {188-191}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A series of bimodal micro-mesoporous H/BEA zeolite derivatives were prepared by the post-synthesis modification of H/BEA zeolite by NaOH (0.05 M-1.2 M) treatment Samples were characterized by powder XRD, low temperature nitrogen adsorption/desorption, temperature programmed desorption of ammonia and ICP. The mesopore formation was found to play a crucial role in liquid phase esterification of levulinic acid with ethanol. The enhanced catalytic activity of a bimodal micro-mesoporous H/BEA zeolite derivative (H/BEA(0.10)) prepared by treatment with 0.1M NaOH can be mainly attributed to the high mesoporosity coupled with better preserved crystallinity and acidic properties. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Esterification, ethyl levulinate, H/BEA zeolite, Mesoporosity, Post-synthesis modification}, issn = {1566-7367}, doi = {10.1016/j.catcom.2013.10.006}, author = {Patil, C. R. and Niphadkar, P. S. and Bokade, Vijay V. and Joshi, P. N.} } @article { ISI:000341764500007, title = {Esterification of renewable levulinic acid to ethyl levulinate biodiesel catalyzed by highly active and reusable desilicated H-ZSM-5}, journal = {Journal of Chemical Technology and Biotechnology}, volume = {89}, number = {10}, year = {2014}, month = {OCT}, pages = {1507-1515}, publisher = {WILEY-BLACKWELL}, type = {Article}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

BACKGROUNDIn the near future, fossil fuel will have limitations in terms of availability and also great concerns over its environmental impact. New routes and related technologies based on renewable feedstocks can overcome most of these problems associated with fossil fuel. Among current biodiesel sources, ethyl levulinate (EL) biodiesel obtained from catalytic esterification of renewable levulinic acid (LA) with ethanol has received a great deal of attention. The use of desilicated H-ZSM-5 (DH-ZSM-5) as heterogeneous acid catalyst for EL biodiesel production in a closed system (under autogeneous pressure) was studied. RESULTSThe effect of reaction parameters such as ethanol to LA molar ratio (4:1 to 10:1), catalyst to LA ratio (0.10-0.25), speed of agitation (100-400rpm), particle size (53-355 mu m), reaction temperature (363-403K) and reaction time (7h) was investigated to maximize LA conversion. CONCLUSIONLevulinic acid conversion reached 95\% over DH-ZSM-5 and the catalyst was reusable for up to six cycles. This LA conversion and the catalyst reusability values are higher than others reported in the literature. A pseudo-homogeneous (P-H) kinetic model indicated that reaction rate constants increased with increasing molar ratio, catalyst to LA ratio and reaction temperature. The activation energy decreased from 73.14 to 21.08 kJ mol(-1) when increasing the catalyst to LA ratio from 0.10 to 0.25, which implies a kinetically controlled reaction. (c) 2013 Society of Chemical Industry

}, keywords = {desilicated H-ZSM-5, Esterification, ethyl levulinate, levulinic acid}, issn = {0268-2575}, doi = {10.1002/jctb.4228}, author = {Nandiwale, Kakasaheb Y. and Niphadkar, Prashant S. and Deshpande, Shilpa S. and Bokade, Vijay V.} } @article { ISI:000341065800011, title = {Facile method for the synthesis of Co-core Au-shell nanohybrid}, journal = {New Journal Of Chemistry}, volume = {38}, number = {9}, year = {2014}, month = {SEP}, pages = {4107-4114}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Heterostructured Co-Au core-shell nanoparticles have been synthesized by reducing AuCl4- ions on cobalt nanoparticles after a minor but effective modification of cobalt surface by an amine. The core shell morphology is emphatically confirmed by thorough investigation through UV-Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopic analysis (TEM). The chemical composition and topography were determined using STEM-HAADF analysis and EFTEM imaging. Fourier transform infrared (FTIR) spectroscopy confirms the surface modification of Co nanoparticles and the interactions involved between the ligands and the core and shell metals at various steps of the synthetic process. The magnetic properties confirm the material to be superparamagnetic in nature.

}, issn = {1144-0546}, doi = {10.1039/c4nj00733f}, author = {Sardar, Debasmita and Neogi, S. K. and Bandyopadhyay, Sanjoy and Satpati, Biswarup and Jain, Ruchi and Gopinath, Chinnakonda S. and Bala, Tanushree} } @article { ISI:000346266000074, title = {Field emission properties of ZnO nanosheet arrays}, journal = {Applied Physics Letters}, volume = {105}, number = {23}, year = {2014}, month = {DEC}, pages = {233101}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

{Electron emission properties of electrodeposited ZnO nanosheet arrays grown on Indium tin oxide coated glass substrates have been studied. Influence of oxygen vacancies on electronic structures and field emission properties of ZnO nanosheets are investigated using density functional theory. The oxygen vacancies produce unshared d electrons which form an impurity energy state; this causes shifting of Fermi level towards the vacuum, and so the barrier energy for electron extraction reduces. The ZnO nanosheet arrays exhibit a low turn-on field of 2.4 V/mu m at 0.1 mu A/cm(2) and current density of 50.1 mu A/cm(2) at an applied field of 6.4 V/mu m with field enhancement factor

}, issn = {0003-6951}, doi = {10.1063/1.4903271}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Chakravarty, Disha and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article { ISI:000330083100010, title = {Formation of a pseudo-beta-hairpin motif utilizing the Ant-Pro reverse turn: consequences of stereochemical reordering}, journal = {Organic \& Biomolecular Chemistry}, volume = {12}, number = {5}, year = {2014}, month = {FEB}, pages = {774-782}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein, we report a special case of pseudo-beta-hairpin formation by tetrapetide sequences featuring a two-membered Ant Pro dipeptide motif (Ant = anthranilic acid and Pro = proline) at the loop region. These folded structures uniquely feature the presence of C9- and C17-H-bonding patterns at reverse turn and interstrand regions, respectively. Their hairpin nucleation and folding propensities have been expounded using solution and solid state studies of distinct stereochemically altered sequences.

}, issn = {1477-0520}, doi = {10.1039/c3ob42016g}, author = {Nair, Roshna V. and Kotmale, Amol S. and Dhokale, Snehal A. and Gawade, Rupesh L. and Puranik, Vedavati G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000338353000004, title = {Glycerol etherification using n-butanol to produce oxygenated additives for biodiesel fuel over H-beta zeolite catalysts}, journal = {Energy Technology}, volume = {2}, number = {5}, year = {2014}, month = {MAY}, pages = {446-452}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The catalytic etherification of glycerol has been systematically studied in batch process by using n-butanol to produce oxygenated additives for biodiesel fuels over various solid-acid catalysts, such as H-beta zeolite, ZSM-5, K10, etc.. The present work includes a detailed study of the optimization of the etherification process parameters, such as catalyst loading (7-20 wt\% of glycerol), molar ratio of glycerol/n-butanol (1: 6 to 1: 15), speed of agitation (100-400 rpm), reaction temperature (413-453 K), and reaction time (0.5-4 h) in view of maximizing the glycerol conversion and selectivity towards mono-butyl-glycerol ether (ME). The catalyst reusability was studied using the optimized process parameters. Amongst the studied catalysts, the H-beta zeolite was found to be the most promising for the etherification of glycerol with glycerol conversion of 55\% and a 98\% selectivity towards ME formation. The H-beta zeolite was found to be an active and stable catalyst for up to 4 cycles. The use of n-butanol as alkylating agent is presented for first time, to the authors knowledge. The reaction was performed at milder operating conditions (0.5 MPa) than previously reported (2 MPa). A kinetic model was developed for the etherification reaction and the data obtained at optimized process parameters was used to calculate the kinetic parameters. The reaction rate constants at different reaction temperatures, activation energies, and pre-exponential factors were obtained for the etherification reaction with an accuracy of R-2 \> 0.989.

}, keywords = {biofuels, catalysis, etherification, fuel additives, zeolites}, issn = {2194-4288}, doi = {10.1002/ente.201300169}, author = {Nandiwale, Kakasaheb Y. and Patil, Shivraj E. and Bokade, Vijay V.} } @article { ISI:000336072400003, title = {Graphene quantum dots conjugated albumin nanoparticles for targeted drug delivery and imaging of pancreatic cancer}, journal = {Journal of Materials Chemistry B}, volume = {2}, number = {21}, year = {2014}, month = {JUN}, pages = {3190-3195}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Pancreatic cancer is considered to be the deadliest of all cancers due to its poor prognosis and resistance to conventional therapies. In this study, the potential of hyaluronic acid functionalized and green fluorescent graphene quantum dot (GQD)-labeled human serum albumin nanoparticles for pancreatic cancer specific drug delivery and bioimaging was explored. GQDs with tunable fluorescence properties and biocompatibility have attracted much more interest in recent years as compared to their metal semiconductor counterparts. We adopted lawsone (2-hydroxy-1,4-naphthoquinone) as a novel reducing agent for the synthesis of quantum dots and, in addition to excellent fluorescence of the synthesized GQDs, a good quantum yield of similar to 14\% was also obtained. Gemcitabine, the most preferred drug for pancreatic cancer treatment, was encapsulated in albumin nanoparticles, and it was observed that our nanoformulation significantly enhanced the bioavailability and sustained release property of the drug to pancreatic cancer cells in vitro. Moreover, the GQD-mediated bioimaging was excellent and enhanced the efficacy of our system as a drug delivery vehicle.

}, issn = {2050-750X}, doi = {10.1039/c4tb00015c}, author = {Nigam, Preeti and Waghmode, Shobha and Louis, Michelle and Wangnoo, Shishanka and Chavan, Pooja and Sarkar, Dhiman} } @article { ISI:000344998100063, title = {Green chemistry approach to styrene from ethylbenzene and air on MnxTi1-xO2 catalyst}, journal = {RSC Advances}, volume = {4}, number = {100}, year = {2014}, month = {OCT}, pages = {57087-57097}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Styrene (ST) is an industrially important commodity chemical, and design of a suitable catalyst, which provides high ethyl benzene (EB) conversion and styrene selectivity at Lower temperature with sustainable activity, is one of the major challenges in the field of heterogeneous catalysis. Manganese incorporated in titania (MnxT1-xO2) anatase Lattice, prepared via the solution combustion method, was evaluated for oxidative dehydrogenation (ODH) of EB with O-2 or air. MnxTi1-xO2 catalysts were characterized by different physiochemical methods. Up to 15\% Mn could be introduced into the TiO2 Lattice. TEM and XRD indicate disordered mesoporosity, further confirmed by adsorption isotherm analysis. MnxTi1-xO2 catalysts were evaluated for ST synthesis from EB using air or oxygen as oxidant between 440 and 570 degrees C. Reaction conditions have been varied systematically, such as catalyst composition, and EB/air/O-2 flow. MnxTi1-xO2 shows sustainable 55\% styrene yield for 45 h without deactivation under optimum conditions. A thorough analysis of spent catalysts demonstrates the conversion of initial anatase phase MnxTi1-xO2 to Mn3O4 supported on the rutile (R) phase of TiO2. The above change occurs in the first few hours of reaction and the Mn3O4 on R-TiO2 phase is the active phase of the catalyst and responsible for sustainable activity for Longer duration.

}, issn = {2046-2069}, doi = {10.1039/c4ra11814f}, author = {Negi, Sanjay Singh and Venugopalan, Aswathy Thareparambil and Raja, Thirumalaiswamy and Singh, Anand Pal and Gopinath, Chinnakonda S.} } @article { ISI:000345826600002, title = {Heterogeneous foldamers from aliphatic-aromatic amino acid building blocks: current trends and future prospects}, journal = {European Journal of Organic Chemistry}, volume = {46}, number = {35}, year = {2014}, month = {DEC}, pages = {7763-7780}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Chemists{\textquoteright} constant pursuit of understanding of the underlying principles of nature{\textquoteright}s most intricate phenomenon such as protein folding has led to the development of the field of foldamers. The emergence of diverse classes of unnatural amino acid building blocks has unleashed countless opportunities to design, develop and explore the structural and functional aspects of synthetic peptides. One current trend in foldamer chemistry is the heterofoldamer approach, which involves systematic stoichiometric variation of various natural/unnatural amino acid residues, leading to conformational ordering with intriguing structural architectures. In this regard, the incorporation of aromatic amino acids provides efficient structural rigidification and tunability to the molecular scaffolds, which can exhibit a range of secondary structural features. Recent times have witnessed an upsurge of foldamers featuring aliphatic-aromatic residues with diverse structural propensities. This review is an effort to cover this rapidly developing field of foldamer science and also to envisage its future perspectives.

}, keywords = {Amino acids, Conformation analysis, Foldamers, hydrogen bonding, Peptides, Stacking interactions}, issn = {1434-193X}, doi = {10.1002/ejoc.201402877}, author = {Nair, Roshna V. and Vijayadas, Kuruppanthara N. and Roy, Arup and Sanjayan, Gangadhar J.} } @article { ISI:000330999600057, title = {IFN-gamma signaling maintains skin pigmentation homeostasis through regulation of melanosome maturation}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {111}, number = {6}, year = {2014}, month = {FEB}, pages = {2301-2306}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Cellular homeostasis is an outcome of complex interacting processes with nonlinear feedbacks that can span distinct spatial and temporal dimensions. Skin tanning is one such dynamic response that maintains genome integrity of epidermal cells. Although pathways underlying hyperpigmentation cascade are recognized, negative feedback regulatory loops that can dampen the activated melanogenesis process are not completely understood. In this study, we delineate a regulatory role of IFN-gamma in skin pigmentation biology. We show that IFN-gamma signaling impedes maturation of the key organelle melanosome by concerted regulation of several pigmentation genes. Withdrawal of IFN-gamma signal spontaneously restores normal cellular programming. This effect in melanocytes is mediated by IFN regulatory factor-1 and is not dependent on the central regulator microphthalmia-associated transcription factor. Chronic IFN-gamma signaling shows a clear hypopigmentation phenotype in both mouse and human skin. Interestingly, IFN-gamma KO mice display a delayed recovery response to restore basal state of epidermal pigmentation after UV-induced tanning. Together, our studies delineate a new spatiotemporal role of the IFN-gamma signaling network in skin pigmentation homeostasis, which could have implications in various cutaneous depigmentary and malignant disorders.

}, keywords = {detanning, gene regulation, interferon, melanin}, issn = {0027-8424}, doi = {10.1073/pnas.1304988111}, author = {Natarajan, Vivek T. and Ganju, Parul and Singh, Archana and Vijayan, Vinaya and Kirty, Kritika and Yadav, Shalini and Puntambekar, Shraddha and Bajaj, Sonali and Dani, Prachi P. and Kar, Hemanta K. and Gadgil, Chetan J. and Natarajan, Krishnamurthy and Rani, Rajni and Gokhale, Rajesh S.} } @article {43228, title = {In situ characterisation of nanoscale electromechanical properties of quasi-two-dimensional MoS2 and MoO3, arXiv preprint arXiv}, journal = {Condensed Matter Materials Science}, volume = {1}, year = {2014}, month = {SEP}, abstract = {

Precise manipulation of electronic band structures of two-dimensional (2D) transition metal dichalcogenides and oxides (TMD\&Os) via localised strain engineering is an exciting avenue for exploiting their unique characteristics for electronics, optoelectronics, and nanoelectromechanical systems (NEMS) applications. This work experimentally demonstrates that mechanically-induced electrical transitions can be engineered in quasi-2D molybdenum disulphide (MoS2) and molybdenum trioxide (MoO3) using an in situ electrical nanoindentation technique. It is shown that localised strains on such quasi-2D layers can induce carrier transport alterations, thereby changing their electrical conduction behaviour. Such strain effects offer a potential tool for precisely manipulating the electronic transport properties of 2D TMD\&Os, and understanding the interactions of the atomic electronic states in such layered materials.

}, author = {Walia, Sumeet and Nili, Hussein and Balendhran, Sivacarendran and Late, Dattatray J. and Sriram, Sharath and Bhaskaran, Madhu} } @article { ISI:000345226100028, title = {Indanthrone derived disordered graphitic carbon as promising insertion anode for sodium ion battery with long cycle life}, journal = {Electrochimica Acta}, volume = {146}, year = {2014}, month = {NOV}, pages = {218-223}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We report facile, one step synthesis of disordered graphitic carbon by high temperature (1000 degrees C) pyrolysis of indanthrone dye (ID). The pyrolysed carbon is disordered in nature and the same is clearly evidenced by various analytical techniques like X-ray diffraction, Raman spectroscopy and high resolution transmission electron microscopy. Na-insertion properties of such indanthrone dye derived disordered graphitic carbon (IDDGC) is evaluated in half-cell assembly (Na/IDDGC). The test cell delivered a reversible capacity of similar to 160 mAh g(-1) at current density of 25 mAg 1. In addition, excellent cycling profiles are noted for such IDDGC, which retains 67\% of initial reversible capacity after 500 cycles. The present study clearly highlights the importance of disorder in the graphitic carbon for efficient Na-ion storage. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {anode, disordered carbon, indanthrone, Na-ion battery}, issn = {0013-4686}, doi = {10.1016/j.electacta.2014.09.052}, author = {Suryawanshi, Anil and Mhamane, Dattakumar and Nagane, Satyawan and Patil, Shankar and Aravindan, Vanchiappan and Ogale, Satishchandra and Srinivasan, Madhavi} } @article { ISI:000338605600002, title = {Influence of starting precursors and synthesis methods on the physiochemical properties of zirconia}, journal = {Materials Research Bulletin}, volume = {55}, year = {2014}, month = {JUL}, pages = {8-12}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Under identical and judiciously pre-optimized synthesis conditions, the influence of different combinations of zirconium sources and/or post treatment conditions on structural properties, thermal stability, phase composition and morphology of zirconia has been investigated. High surface area tetragonal zirconia could be synthesized in a cost-effective manner from 1 M solution of zirconium oxynitrate at pH 11 using aqueous ammonia solution as a precipitant when calcined at 400 degrees C for 3 h. Irrespective of the preparation method, pH and starting precursor, zirconia samples prepared without digestion contained dominant monoclinic phase with some traces of tetragonal phase when calcined at 700 degrees C. Even though there is linear decrease in surface area with increase in the crystallite size for each sample as a function of calcination temperature, no co-relation between the surface area and crystallite size could be achieved. SEM images show agglomerated and irregular shape particles between 10 to 20 mu m. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Oxides, Sol-gel chemistry, Thermogravimetric analysis (TGA)}, issn = {0025-5408}, doi = {10.1016/j.materresbull.2014.03.010}, author = {Gaydhankar, T. R. and Jha, Ratnesh Kumar and Nikalje, M. D. and Waghmare, K. J.} } @article { ISI:000328952500024, title = {Investigations into variations in local cationic environment in layered oxide series InGaO3(ZnO)(m) (m=1-4)}, journal = {Dalton Transactions}, volume = {43}, number = {5}, year = {2014}, month = {NOV}, pages = {2120-2126}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Layered oxides of the series InGaO3(ZnO)(m) (m = 1-4) are interesting due to their structural anisotropy. Here, we report a comprehensive study of their structural details, focusing on the local cationic environment in bulk powder samples by MASNMR and EXAFS, which is hitherto not attempted. It is found that the Ga geometry varies gradually from pure pentacoordinated to a mixture of penta and tetracoordinated with increasing amounts of tetracoordination as we move across the series, contrary to previous reports suggesting exclusively trigonal bipyramidal coordination in all the compounds. A similar observation is also made in the case of Zn and structural evolution involving the dissolution of Ga in a ZnO4 tetrahedral network in a sandwich layer can be discerned, as the insulating ZnO layer size increases.

}, issn = {1477-9226}, doi = {10.1039/c3dt52011k}, author = {Narendranath, Soumya B. and Yadav, Ashok Kumar and Ajithkumar, Thalasseril G. and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Dey, Krishna K. and Raja, Thirumalaiswamy and Devi, R. Nandini} } @article { ISI:000341783900004, title = {Isolation of streptococcus tigurinus - a novel member of streptococcus mitis group from a case of periodontitis}, journal = {FEMS Microbiology Letters}, volume = {357}, number = {2}, year = {2014}, month = {AUG}, pages = {131-135}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Streptococcus tigurinus is a new member of the Streptococcus viridians group and is closely related to Streptococcus mitis, Streptococcus pneumoniae, Streptococcus pseudopneumoniae, Streptococcus oralis, and Streptococcus infantis. The type strain AZ_3a(T) of S. tigurinus was originally isolated from a patient with infective endocarditis. Accurate identification of S. tigurinus is facilitated only by newer molecular methods like 16S rRNA gene analysis. During the course of study on bacteraemia and infective endocarditis with reference to periodontitis and viridians group of streptococci, a strain of S. tigurinus isolated from subgingival plaque of a patient with periodontitis identified by 16S rRNA gene analysis, which was originally identified as Streptococcus pluranimalium by Vitek 2. Confirmation by 16S rRNA gene analysis showed 99.39\% similarity (1476/1485 bp) with S. tigurinus AZ_3a(T) (AORU01000002). To the best of our knowledge, this is the first report of isolation of S. tigurinus from the oral cavity of a periodontitis patient.

}, keywords = {periodontitis, Streptococcus tigurinus, VGS}, issn = {0378-1097}, doi = {10.1111/1574-6968.12519}, author = {Dhotre, Shree V. and Mehetre, Gajanan T. and Dharne, Mahesh S. and Suryawanshi, Namdev M. and Nagoba, Basavraj S.} } @article {46402, title = {Low temperature grown CuBi2O4 with flower morphology and its composite with CuO nanosheets for photoelectrochemical water splitting}, journal = {Journal of Materials Chemistry A}, volume = {2}, year = {2014}, month = {MAR}, pages = {3661-3668}, type = {Article}, abstract = {

In this work we highlight a peculiar synthesis protocol for the p-type ternary metal oxide system of copper bismuth oxide (CuBi2O4), which yields a highly crystalline spherulitic morphology at a low temperature of 78 degrees C. We associate this growth with the hydrogen bonding effects imparted by the ethanol-water co-solvent system used for the synthesis. We present a detailed growth mechanism by evaluating different synthesis conditions systematically. Furthermore we show that upon the use of the non-stoichiometric (excess copper) precursor mixture under the same experimental conditions the growth of spherulitic CuBi2O4 changes the size and type of the spherulites. Interestingly, careful optimization of the nonstoichiometric synthesis presents a complete impediment to the spherulitic growth and produces a composite of nanorods of CuBi2O4 and nanosheets of CuO. This anisotropic nanocomposite shows an order of magnitude higher surface area as compared to spherulitic CuBi2O4. Since both CuBi2O4 and CuO are visible light absorbing p-type semiconductors, when the synthesized nanocomposite materials are examined as photoelectrochemical (PEC) photocathodes for water splitting, they show a remarkable dependence on the morphology and phase constitution. Almost 13-fold stronger PEC response is observed as the morphology changes from spherulites to nanorods.

}, issn = {2050-7488}, doi = {10.1039/c3ta14906d}, author = {Patil, Rupali and Kelkar, Sarika and Naphadeab, Rounak and Ogale, Satishchandra} } @article { ISI:000344791100009, title = {Metallic few-layer flowerlike VS2 nanosheets as field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {31}, year = {2014}, month = {NOV}, pages = {5331-5336}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report first-principles DFT calculations of the single-layer VS2 work function, the experimental synthesis of flower-like few-layer-thick VS2 nanosheets by a simple one-step hydrothermal method, and the investigation of their field emission properties. The turn-on field required to draw emission current densities of 1 and 10 mu A/cm(2) were 4 and 5.01 V/mu m, respectively. The observed turn-on field values are attributed to the high field enhancement factor (ca. 2500), which is due to presence of sharp protrusions in the VS2 nanosheets. Furthermore, the field-emission current stability of the VS2 emitter shows stable behavior over a period of 12 h. Further, DFT calculations show that the work function (f) of the single-layer VS2 emitter is 6.01 eV.

}, keywords = {Density functional calculations, field emission, Layered compounds, Nanostructures, Sulfur, Vanadium}, issn = {1434-1948}, doi = {10.1002/ejic.201402448}, author = {Rout, Chandra Sekhar and Khare, Ruchita T. and Kashid, Ranjit V. and Joag, Dilip S. and More, Mahendra A. and Lanzillo, Nicholas A. and Washington, Morris and Nayak, Saroj K. and Late, Dattatray J.} } @article { ISI:000331132300040, title = {MicroRNA156: a potential graft-transmissible microrna that modulates plant architecture and tuberization in solanum tuberosum ssp andigena}, journal = {Plant Physiology}, volume = {164}, number = {2}, year = {2014}, month = {FEB}, pages = {1011-1027}, publisher = {AMER SOC PLANT BIOLOGISTS}, address = {15501 MONONA DRIVE, ROCKVILLE, MD 20855 USA}, abstract = {

MicroRNA156 (miR156) functions in maintaining the juvenile phase in plants. However, the mobility of this microRNA has not been demonstrated. So far, only three microRNAs, miR399, miR395, and miR172, have been shown to be mobile. We demonstrate here that miR156 is a potential graft-transmissible signal that affects plant architecture and tuberization in potato (Solanum tuberosum). Under tuber-noninductive (long-day) conditions, miR156 shows higher abundance in leaves and stems, whereas an increase in abundance of miR156 has been observed in stolons under tuber-inductive (short-day) conditions, indicative of a photoperiodic control. Detection of miR156 in phloem cells of wild-type plants and mobility assays in heterografts suggest that miR156 is a graft-transmissible signal. This movement was correlated with changes in leaf morphology and longer trichomes in leaves. Overexpression of miR156 in potato caused a drastic phenotype resulting in altered plant architecture and reduced tuber yield. miR156 overexpression plants also exhibited altered levels of cytokinin and strigolactone along with increased levels of LONELY GUY1 and StCyclin D3.1 transcripts as compared with wild-type plants. RNA ligase-mediated rapid amplification of complementary DNA ends analysis validated SQUAMOSA PROMOTER BINDING-LIKE3 (StSPL3), StSPL6, StSPL9, StSPL13, and StLIGULELESS1 as targets of miR156. Gel-shift assays indicate the regulation of miR172 by miR156 through StSPL9. miR156-resistant SPL9 overexpression lines exhibited increased miR172 levels under a short-day photoperiod, supporting miR172 regulation via the miR156-SPL9 module. Overall, our results strongly suggest that miR156 is a phloem-mobile signal regulating potato development.

}, issn = {0032-0889}, doi = {10.1104/pp.113.230714}, author = {Bhogale, Sneha and Mahajan, Ameya S. and Natarajan, Bhavani and Rajabhoj, Mohit and Thulasiram, Hirekodathakallu V. and Banerjee, Anjan K.} } @article { ISI:000340330500055, title = {Modeling chain-end scission using the fixed pivot technique}, journal = {Chemical Engineering Science}, volume = {116}, year = {2014}, month = {SEP}, pages = {601-610}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Chain-end scission of polymer molecules is the breakage of a fixed-size oligomer or monomer from either end of the macromolecule. A common example is the generation of the glucose monomer from the hydrolysis of starch by glucoamylase. Modeling the dynamics of chain-end scission from first principles by considering each molecular size is challenging due to the large number of differential equations to be solved. The Population Balance Modeling (PBM) is a helpful framework as it could be formulated to lump a few molecular sizes together. However, it is then not obvious how to accurately account for the temporal evolution of the low molecular weight species, which is often of the greatest industrial interest. Here, the Fixed Pivot (FP) technique - one of the methods to solve PBM equations was appropriately modified to address this difficulty. By treating the lower molecular size range as a discrete domain in conjunction with a continuous domain in the upper ranges, the modified FP technique not only retains its original strengths, but also captures accurately the distribution of oligomers including the monomer. The results, which were obtained at a fraction of computational expense, benchmarked very well against the exact solutions for a polymer with a broad size distribution at different Degrees of Polymerization up to similar to O(10(5)). To facilitate wider adoption, guidelines on choice of pivots and observations of the performance of the modified FP technique are also deliberated. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Chain-end scission, Fixed Pivot, Polymers, Population balance}, issn = {0009-2509}, doi = {10.1016/j.ces.2014.05.035}, author = {Ho, Yong Kuen and Doshi, Pankaj and Yeoh, Hak Koon and Ngoh, Gek Cheng} } @article { ISI:000337652700002, title = {Mucor hiemalis mediated 14 alpha-hydroxylation on steroids: In vivo and in vitro investigations of 14 alpha-hydroxylase activity}, journal = {Steroids}, volume = {85}, year = {2014}, month = {JUL}, pages = {6-12}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Transformation of testosterone and progesterone into synthetically challenging 14 alpha-hydroxy derivatives was achieved by using fungal strain Mucor hiemalis. Prolonged incubation led to the formation of corresponding 6 beta/7 alpha,14 alpha-dihydroxy metabolites. The position and stereochemistry of newly introduced hydroxyl group was determined by detailed spectroscopic analyses. The time course experiment indicated that fungal strain initiated transformation by hydroxylation at 14 alpha-position followed by at 6 beta- or 7 alpha-positions. Studies using cell-free extracts suggest that the 14 alpha-hydroxylase activity is NADPH dependent and belongs to the cytochrome P450 family. (C) 2014 Elsevier Inc. All rights reserved.

}, keywords = {14 alpha-Hydroxylase, Biotransformation, Mucor hiemalis, Progesterone, Testosterone}, issn = {0039-128X}, doi = {10.1016/j.steroids.2014.04.002}, author = {Kolet, Swati P. and Haldar, Saikat and Niloferjahan, Siddiqui and Thulasiram, Hirekodathakallu V.} } @article { ISI:000347693200012, title = {Multiple novel promoter-architectures revealed by decoding the hidden heterogeneity within the genome}, journal = {Nucleic Acids Research}, volume = {42}, number = {20}, year = {2014}, month = {NOV}, pages = {12388-12403}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

An important question in biology is how different promoter-architectures contribute to the diversity in regulation of transcription initiation. A step forward has been the production of genome-wide maps of transcription start sites (TSSs) using high-throughput sequencing. However, the subsequent step of characterizing promoters and their functions is still largely done on the basis of previously established promoter-elements like the TATA-box in eukaryotes or the -10 box in bacteria. Unfortunately, a majority of promoters and their activities cannot be explained by these few elements. Traditional motif discovery methods that identify novel elements also fail here, because TSS neighborhoods are often highly heterogeneous containing no overrepresented motif. We present a new, organism-independent method that explicitly models this heterogeneity while unraveling different promoter-architectures. For example, in five bacteria, we detect the presence of a pyrimidine preceding the TSS under very specific circumstances. In tuberculosis, we show for the first time that the spacing between the bacterial 10-motif and TSS is utilized by the pathogen for dynamic gene-regulation. In eukaryotes, we identify several new elements that are important for development. Identified promoter-architectures show differential patterns of evolution, chromatin structure and TSS spread, suggesting distinct regulatory functions. This work highlights the importance of characterizing heterogeneity within high-throughput genomic data rather than analyzing average patterns of nucleotide composition.

}, issn = {0305-1048}, doi = {10.1093/nar/gku924}, author = {Narlikar, Leelavati} } @article { ISI:000337123100037, title = {Nanophase CulnS(2) nanosheets/CuS composite grown by the SILAR method leads to high performance as a counter electrode in dye sensitized solar cells}, journal = {RSC Advances}, volume = {4}, number = {42}, year = {2014}, month = {MAY}, pages = {21989-21996}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Single phase CulnS(2) (CIS) nanosheets are synthesized on TiO2 coated FTO by the simple technique of Successive Ionic Layer Adsorption Reaction (SILAR) followed by annealing at 500 degrees C. Annealing at a lower temperature of 250 degrees C is found to yield CuS nanoparticles in addition to the CIS phase. Both single phase CIS and the CuS/CIS nanocomposite were examined as counter electrodes for a dye-sensitized solar cell (DSSC). The CIS-CuS composite is found to have a synergistic effect on the catalytic performance toward the reduction of tri-iodide, yielding a power conversion efficiency of 6.3\% as compared to pristine CIS (5\%) or CuS (3.5\%). The possible reasons behind the high performance of the composite are elucidated using cyclic voltammetry (CV) measurements and electrochemical impedance spectroscopy (EIS).

}, issn = {2046-2069}, doi = {10.1039/c4ra01740d}, author = {Bhosale, Reshma K. and Agarkar, Shruti A. and Agrawal, Ishita and Naphade, Rounak A. and Ogale, Satishchandra} } @article { ISI:000344978200129, title = {Nanostructured donor-acceptor self assembly with improved photoconductivity}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {21}, year = {2014}, month = {NOV}, pages = {19434-19448}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nanostructured supramolecular donor-acceptor assemblies were formed when an unsymmetrical N-substituted pyridine functionalized perylenebisimide (UPBI-Py) was complexed with oligo(p-phenylenevinylene) (OPVM-OH) complementarily functionalized with hydroxyl unit and polymerizable methacrylamide unit at the two termini. The resulting supramolecular complex [UPBI-Py (OPVM-OH)](1.0) upon polymerization by irradiation in the presence of photoinitiator formed well-defined supramolecular polymeric nanostructures. Self-assembly studies using fluorescence emission from thin film samples showed that subtle structural changes occurred on the OPV donor moiety following polymerization. The 1:1 supramolecular complex showed red-shifted aggregate emission from both OPV (similar to 500 nm) and PBI (similar to 640 nm) units, whereas the OPV aggregate emission was replaced by intense monomeric emission (similar to 430 nrn) upon polymerizing the methacrylamide units on the OPVM-OH. The bulk structure was studied using wide-angle X-ray diffraction (WXRD). Complex formation resulted in distinct changes in the cell parameters of OPVM-OH. In contrast, a physical mixture of 1 mol each of OPVM-OH and UPBI-Py prepared by mixing the powdered solid samples together showed only a combination of reflections from both parent molecules. Thin film morphology of the 1:1 molecular complex as well as the supramolecular polymer complex showed uniform lamellar structures in the domain range \<10 rim. The donor-acceptor supramolecular complex [UPBI-Py (OPVM-OH)](1.0) exhibited space charge limited current (SCLC) with a bulk mobility estimate of an order of magnitude higher accompanied by a higher photoconductivity yield compared to the pristine UPBI-Py. This is a very versatile method to obtain spatially defined organization of n and p-type semiconductor materials based on suitably functionalized donor and acceptor molecules resulting in improved photocurrent response using self-assembly.

}, keywords = {donor-acceptor, hydrogen bonding, oligo(p-phenylenevinylene), Perylenebisimide, photoconductivity, supramolecular polymeric nanostructures}, issn = {1944-8244}, doi = {10.1021/am5055542}, author = {Saibal, B. and Ashar, A. Z. and Devi, R. Nandini and Narayan, K. S. and Asha, S. K.} } @article {42587, title = {Naphthalene diimide copolymers with oligo(p-phenylenevinylene) and benzobisoxazole for balanced ambipolar charge transport}, journal = {Macromolecules}, volume = {47}, year = {2014}, month = {MAR}, pages = {2296{\textendash}2305}, abstract = {

A series of alternating and random donor (D){\textendash}acceptor (A) copolymers based on naphthalene diimide (NDI) as the acceptor and oligo(p-phenylenevinylene) (OPV) or benzobisoxazole (BBO) as the strong and weak donor, respectively, were designed and synthesized by Suzuki coupling and Horner{\textendash}Wadsworth{\textendash}Emmons polymerization. The effect of the varying donor strength of OPV and BBO on the photophysical, electrochemical, and semiconducting properties of the polymers was investigated. Absorption and emission spectra recorded for dilute chloroform solution and thin film showed increased intramolecular charge transfer for NDI-alt-OPV polymer compared to NDI-alt-BBO polymer. Cyclic voltammetry studies along with DFT (density functional theory) studies at the B3LYP/6-31g* level gave insight into the energy level (HOMO/LUMO) and molecular orientation of donor and acceptor along the polymer backbone. NDI-alt-OPV polymer exhibited rigid coplanar structure with extended π-conjugation which induced backbone planarity and crystallinity to the polymer. The inherent poor solubility of the NDI-alt-BBO prevented further device characterization of this polymer. Random copolymer having maximum 30\% incorporation of BBO comonomer in NDI-r-OPV/BBO was found to be soluble for further characterization. Compared to NDI-alt-OPV, lowering of both energy levels LUMO (\~{}0.2 eV) and HOMO (\~{}0.5 eV) was observed for both NDI-alt-BBO and the NDI-r-OPV/BBO. Bottom gate{\textendash}top contact organic field effect transistors (OFETs) of NDI-alt-OPV exhibited balanced ambipolar charge transport with average electron and hole mobility of 3.09 {\texttimes} 10{\textendash}3 cm2 V{\textendash}1 s{\textendash}1 and 2.1 {\texttimes} 10{\textendash}3 cm2 V{\textendash}1 s{\textendash}1, respectively, whereas the random copolymer incorporating both OPV and BBO units NDI-r-OPV/BBO showed dominant n-type charge transport with moderate 4 {\texttimes} 10{\textendash}4 cm2 V{\textendash}1 s{\textendash}1 average electron mobility. The present work thus highlights the structure{\textendash}property relationship and the electronic tunability required in this class of NDI-based polymers to produce ambipolar transistors.

}, doi = {10.1021/ma5001145}, author = {Kolhe, Nagesh B. and Ashar, A. Z. and Narayan, K. S. and Asha, S. K.} } @article { ISI:000346643600072, title = {Negative infrared photocurrent response in layered WS2/reduced graphene oxide hybrids}, journal = {Applied Physics Letters}, volume = {105}, number = {24}, year = {2014}, month = {DEC}, pages = {243502}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

We report high performance IR photocurrent response of two-dimensional hybrid materials consisting of layered WS2 nanosheets and reduced graphene oxide (RGO). Comparative photocurrent response studies of WS2 nanosheets, RGO, and WS2/RGO hybrids were carried out by performing current-voltage (I-V) and time-dependent current measurements with a laser excitation source having a wavelength of 808 nm. The experimental investigations indicate that WS2/RGO hybrids show negative photocurrent response, whereas WS2 and RGO show positive photocurrent response. The negative photocurrent response of the WS2/RGO hybrids is explained using a band alignment diagram and attributed to a charge transfer mechanism between WS2 and RGO. This analysis is further corroborated by first-principles density functional calculations. The fabricated device based on WS2/RGO hybrids shows a photosensitivity R-lambda of about 6 AW(-1) and a quantum efficiency eta of similar to 924\%, which demonstrates high sensitivity of the hybrid material towards IR detection. WS2/RGO hybrids are therefore promising candidates for potential applications in optoelectronic circuits and low cost, high performance, and reliable photodetectors. (C) 2014 AIP Publishing LLC.

}, issn = {0003-6951}, doi = {10.1063/1.4903780}, author = {Ratha, Satyajit and Simbeck, Adam J. and Late, Dattatray J. and Nayak, Saroj K. and Rout, Chandra Sekhar} } @article { ISI:000334895800011, title = {Novel catalysts for valorization of biomass to value-added chemicals and fuels}, journal = {Journal of Chemical Sciences}, volume = {126}, number = {2, SI}, year = {2014}, note = {21st National Symposium on Catalysis (CATSYMP), CSIR Indian Inst Chem Technol, Hyderabad, INDIA, FEB 11-13, 2013}, month = {MAR}, pages = {403-413}, publisher = {Catalysis Soc India}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Key furan compounds such as 5-hydroxymethylfurfural (HMF), 2,5-furandicarboxylic acid (FDCA) and 2,5-dimethylfuran (DMF) were synthesized from renewable feedstocks. Dehydration of fructose was carried out in biphasic conditions employing several solid acid catalysts by targeting selective formation of HMF. Its selectivity is linearly dependent on total acidity clearly revealing that lower acidity favours selective formation of HMF. Oxidation and hydrogenolysis of HMF has been explored using 2 wt\% Ru-K-OMS-2. The catalysts used for each transformation were subjected to detailed characterization using XRD, BET surface area, temperature-programmed desorption and transmission electron microscopy. The effect of various reaction parameters was also investigated for obtaining high yields of desired chemical intermediates. High FDCA yields of 93.4 mol\% and 66 mol\% were achieved in alkaline and base-free conditions, respectively. The 2 wt\% Ru-K-OMS-2 is a versatile catalyst as it also catalyses HMF hydrogenolysis giving 33 mol\% of DMF. Thus, utility of various novel materials as catalysts has been demonstrated in the multistep transformations of hexoses to furan-based fuels and chemicals.

}, keywords = {2, 5-dimethylfuran, 5-furan dicarboxylic acid, 5-hydroxymethyl furfural, dehydration, fructose}, issn = {0974-3626}, author = {Lucas, Nishita and Kanna, Narasimha Rao and Nagpure, Atul S. and Kokate, Ganesh and Chilukuri, Satyanarayana V.} } @article { ISI:000338748400051, title = {One-pot synthesis of 5-hydroxymethylfurfural by cellulose hydrolysis over highly active bimodal micro/mesoporous H-ZSM-5 catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {2}, number = {7}, year = {2014}, month = {JUL}, pages = {1928-1932}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Direct synthesis of 5-hydroxymethylfurfural (5-HMF), a useful renewable biofuel and biochemical, was systematically studied by hydrolysis of microcrystalline cellulose over Bimodal-HZ-5 zeolite. Bimodal-HZ-5 zeolite obtained by post-synthesis modification of H-ZSM-5 with desilication was found to be a potential heterogeneous catalyst with 67\% cellulose conversion and 46\% yield of 5-HMF. Bimodal-HZ-5 was observed to be reusable for four cycles, without any loss in activity. The detailed optimization of process parameters and catalyst reusability are also presented. The present study opens a new avenue for the renewable one-pot synthesis of 5-HMF, a valuable product.

}, keywords = {5-Hydroxymethylfurfural, Biomodal-HZ-5, glucose, Hydrolysis, Microcrystalline cellulose}, issn = {2168-0485}, doi = {10.1021/sc500270z}, author = {Nandiwale, Kakasaheb Y. and Galande, Nitish D. and Thakur, Pratika and Sawant, Sanjay D. and Zambre, Vishal P. and Bokade, Vijay V.} } @article {46393, title = {Pharmaceutical solids in crystal engineering}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C12}, type = {Meeting Abstract}, keywords = {cocrystals, crystal engineering, Supramolecular synthon}, issn = {2053-2733}, author = {Nangia, Ashwini} } @article { ISI:000341226500016, title = {pH-Dependent single-step rapid synthesis of cuo and cu2o nanoparticles from the same precursor}, journal = {Crystal Growth \& Design}, volume = {14}, number = {9}, year = {2014}, month = {SEP}, pages = {4329-4334}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A single-step protocol to prepare Cu2O and CuO nanocrystalline particles from the same precursor by microwave irradiation has been developed using the pH of the solution as the only variable parameter. The utility of different bivalent Cu-precursors for synthesis of CuO and Cu2O nanoparticles was also investigated. The morphology, phase purity, and optical properties of these nanoparticles were analyzed using TEM, SEM, XRD, and optical spectroscopy. The band edges were determined using cyclic voltammetry. Field effect transistors based on CuO nanoparticles showed a hole mobility of 3.5 x 10(-2) cm(2) V-1 s(-1), making them a suitable candidate for energy-related applications. The effect of hydrazine vapor exposure on the IV-characteristics of CuO nanoparticles was also investigated. This revealed a decrease in source current with respect to time.

}, issn = {1528-7483}, doi = {10.1021/cg500394p}, author = {Nikam, Arun V. and Arulkashmir, Arulraj and Krishnamoorthy, Kothandam and Kulkarni, Amol A. and Bhagavatula L. V. Prasad} } @article { ISI:000340446300061, title = {Photocatalytic H-2 evolution from water-methanol system by anisotropic InFeO3(ZnO)(m) oxides without cocatalyst in visible light}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {15}, year = {2014}, month = {AUG}, pages = {12321-12327}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

InFeO3(ZnO)(m), series of oxides are found to give unprecedented H-2 evolution from water-methanol mixtures without using any cocatalysts. This family of compounds has an anisotropically layered structure in which Zn/FeOn polyhedra are sandwiched between InO6 octahedral layers. Local structure characterization by X-ray absorption spectroscopy reveals that Zn coordination changes from pentacoordinated to tetrahedral geometry across the series, whereas Fe geometry remains trigonal bipyramidal in all the compounds. This peculiar structure is conducive for a spatial separation of photogenerated charges reducing recombination losses. Band gap energies calculated from absorption spectra indicate potential visible light activity, and this may be due to the orbital mixing of Fe 3d and O 2p as revealed by pre-edge features of X-ray absorption spectra. Band positions are also advantageously placed for a visible light H-2 generation and is indeed found to be the case in methanol-assisted water splitting with standardized hydrogen evolution of similar to 19.5 mmol g(-1) h(-1) for all the catalysts.

}, keywords = {anisotropic structure, H-2 evolution, InFeO3(ZnO)(m), layered oxide, photocatalytic water splitting}, issn = {1944-8244}, doi = {10.1021/am501976z}, author = {Narendranath, Soumya B. and Yadav, Ashok Kumar and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Devi, R. Nandini} } @article { ISI:000331493100022, title = {Photoresponsive smectic liquid crystalline multipods and hyperbranched azo polymers}, journal = {Journal of Physical Chemistry B}, volume = {118}, number = {6}, year = {2014}, month = {FEB}, pages = {1670-1684}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Liquid crystalline azobenzene containing triped and tetraped monomers were designed and synthesized and further used as B-3 and B-4 type monomers to form hyperbranched polymers with tetraethylene glycol as the A(2) type comonomer. The mesophase characteristics of the multiarm-star mesogens and hyperbranched polymers were analyzed using various instrumentation techniques like differential scanning calorimetry (DSC), polarized light microscopy (PLM) and variable temperature XRD. The multipod monomers as well as hyperbranched polymers exhibited thermotropic smectic liquid crystalline characteristics with a tendency toward higher ordered smectic LC phases with increased branching. The hyperbranched polymers exhibited lamellar organization even in the as-solvent precipitated powder sample indicating higher extent of nanosegregation. Their potential application as fast switching photochromic materials was highlighted by carrying out isothermal photo-switching experiments in the LC state. Reversible isothermal smectic-isotropic phase transition could be achieved by UV irradiation in \<1 s in the multipod monomers, while it required \>2 s UV irradiation in the case of the hyperbranched polymers.

}, issn = {1520-6106}, doi = {10.1021/jp410589h}, author = {Nardele, Chinmay G. and Asha, S. K.} } @article {46370, title = {Plasmonic light harvesting of dye sensitized solar cells by Au-nanoparticle loaded TiO2 nanofibers}, journal = {Journal of Materials Chemistry A}, volume = {2}, year = {2014}, month = {FEB}, pages = {975-984}, type = {Article}, abstract = {

We report a significant enhancement in the performance of dye sensitized solar cells by using in situ Au nanoparticle (Au NP) loaded TiO2 nanofibers (Au: TiO2 NFs) as the light harvesting (LH) layer as compared to the use of only TiO2 nanofibers (NFs) as the LH layer. The Au NP: TiO2 nanofibers are prepared by electro-spinning of a precursor mixture whereby nanostructured porous TiO2 nanofibers are formed and get in situ loaded with only 4-5 nm AuNPs. The as-synthesized nanofibers are characterized by X-ray diffraction, Raman, photoluminescence (PL) and Mott-Schottky analyses. The presence of gold nanoparticles shows considerable improvements in light harvesting and the electrochemical properties of TiO2 nanofibers. A remarkable enhancement in the efficiency by 25\% is achieved with the AuNF LH layer as compared to 12\% with the NF layer, over the value without any light harvesting layer. The IPCE and impedance analyses reveal commensurate improvements. The impedance study shows a decrease in the transport resistance (R-TiO2) and an increment in the chemical capacitance and life time of the solar cell. Systematic analyses of the optical properties suggest that the enhanced light harvesting by Au NP loaded TiO2 nanofibers is caused by the role of plasmon-polariton modes at the distributed nanoscale Schottky junctions in the Au: TiO2 nanofibers.

}, issn = {2050-7488}, doi = {10.1039/c3ta13246c}, author = {Naphade, Rounak A. and Tathavadekar, Mukta and Jog, Jyoti P. and Agarkar, Shruti and Ogale, Satishchandra} } @article { ISI:000330822000009, title = {Polystyrene/TiO2 composite electrospun fibers as fillers for poly(butylene succinate-co-adipate): Structure, morphology and properties}, journal = {European Polymer Journal}, volume = {50}, year = {2014}, month = {JAN}, pages = {78-86}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In this work, composite polystyrene/titanium dioxide (PS/TiO2) electrospun fibers were used as a reinforcement for a poly(butylene succinate-co-adipate) (PBSA) matrix. The structure, morphology, mechanical properties and degradation behavior of such materials were investigated, finding that, as a function of their TiO2 content, the fibers exerted different effects. The main mechanism through which the fibers modified the structure and morphology of the polymer matrix is by altering its crystallization kinetics. The presence of TiO2 modified the roughness of the fibers and therefore affected the interfacial adhesion between the filler and the matrix. The modulus of PBSA was improved, even though the brittleness of the materials was increased by the presence of the fibers. Different amounts of TiO2 within the fibers allowed to tune the hydrolytic degradation rate of the composites. This paper shows the potential of using composite electrospun fibers as effective fillers for the preparation of polymer-based composites. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Biodegradable polymers, Degradation, electrospinning, Morphology, Nanocomposites, Polycaprolactone}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2013.11.002}, author = {Neppalli, Ramesh and Causin, Valerio and Benetti, Edmondo Maria and Ray, Suprakas Sinha and Esposito, Antonella and Wanjale, Santosh and Birajdar, Mallinath S. and Saiter, Jean-Marc and Marigo, Antonio} } @article { ISI:000342525100047, title = {Preparation and characterization of porous fly ash/NiFe2O4 composite: promising adsorbent for the removal of congo red dye from aqueous solution}, journal = {Materials Chemistry and Physics}, volume = {148}, number = {1-2}, year = {2014}, month = {NOV}, pages = {371-379}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A series of fly ash/NiFe2O4 composites were prepared using fly ash and aqueous solutions of Ni, Fe nitrate salts and NaOH by co-precipitation followed by calcination method. The \% mass ratio of fly ash: NiFe2O4 was varied in the range of 0:100 to 100:0. Samples were characterized by powder XRD, SEM, FTIR and N-2 adsorption-desorption measurements. These samples were further evaluated for their adsorptive performance in removal of Congo red (CR) dye from an aqueous solution. In all the composites, spinel nickel ferrite phase was found to be capable to get anchored with the fly ash surface and exhibited more crystalline nature as compared to pure NiFe2O4 phase. The BET surface area and porous character of the composite were found to increase with the decrease in the contribution of the fly ash, reach to maximum and then decreases on further decrease in fly ash. The composite having \% mass ratio of fly ash: NiFe2O4 = 50:50 exhibited maximum CR adsorption from the aqueous solution on account of the higher BET surface area, more porous character, favorable condition for diffusion of dye molecules and combined effect of chemisorption and physisorption. Under optimum conditions, it has shown the recyclability with adsorption capacity of the magnitude 23.33 mg g(-1), which is much higher than individual fly ash, NiFe2O4 and other composites. The sorption data provided good fit with pseudo-second order kinetic model. The analyses of the adsorption data indicated that, the Langmuir model provides better correlation with the experimental data. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Adsorption, Composite material, Electron microscopy (SEM), Inorganic compounds, powder diffraction, Precipitation}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2014.07.057}, author = {Sonar, Shilpa K. and Niphadkar, Prashant S. and Mayadevi, S. and Joshi, Praphulla N.} } @article { ISI:000346322200011, title = {Process optimization by response surface methodology and kinetic modeling for synthesis of methyl oleate biodiesel over H3PW12O40 anchored montmorillonite K10}, journal = {Industrial \& Engineering Chemistry Research}, volume = {53}, number = {49}, year = {2014}, month = {DEC}, pages = {18690-18698}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Heterogeneous acid catalysts comprised of 1030\% (w/w) H3PW12O40 anchored to montmorillonite (K10) were used for synthesis of methyl oleate biodiesel by esterification of free fatty acid (oleic acid) with methanol in closed batch system. Response surface methodology (RSM) was employed to optimize esterification of oleic acid with methanol over 20\% (w/w) H3PW12O40/K-10. The effects of various process parameters such as catalyst loading, molar ratio, and reaction temperature on oleic acid conversion were addressed by BoxBehnken experimental design (BBD). Coefficient of determination (R-2) of this model was 0.996. 20\% (w/w) H3PW12O40/K-10 was proved to be potential catalyst with 100\% oleic acid conversion at optimized process parameters and with reusability of four cycles. Moreover, a second-order pseudohomogeneous (PH) kinetic model has been proposed and validated (R-2 \> 0.97) with experimental data. Kinetics confirmed that esterification reaction is performed in the kinetic regime due to high activation energy of 43.7 kJ mol(-1).

}, issn = {0888-5885}, doi = {10.1021/ie500672v}, author = {Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000340350900018, title = {Production of octyl levulinate biolubricant over modified H-ZSM-5: Optimization by response surface methodology}, journal = {Journal of Energy Chemistry}, volume = {23}, number = {4}, year = {2014}, month = {JUL}, pages = {535-541}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The present study highlighted the use of modified H-ZSM-5 (Meso-HZ-5) as heterogeneous catalyst for the synthesis of octyl levulinate biolubricant by catalytic esterification of biomass derived renewable levulinic acid (LA) with n-octanol. The process variables such as catalyst loading (X-1), n-octanol to LA molar ratio (X-2) and reaction temperature (X-3) were optimized through response surface methodology (RSM), using Box-Behnken model. Analysis of variance was performed to determine the adequacy and significance of the quadratic model. The yield of octyl levulinate was obtained to be 99\% at optimum process parameters. The developed quadratic model was found to be adequate and statistically accurate with correlation value (R-2) of 0.9971 to predict the yield of octyl levulinate biolubricant. The study was also extended on the validation of theoretical and experimental data, including catalyst reusability.

}, keywords = {biolubricant, Esterification, H-ZSM-5, levulinic acid, octyl levulinate, Response surface methodology}, issn = {2095-4956}, doi = {10.1016/S2095-4956(14)60182-0}, author = {Nandiwale, Kakasaheb Y. and Yadava, Sunil K. and Bokade, Vijay V.} } @article { ISI:000329791800007, title = {Pseudo-homogeneous kinetic model for esterification of acetic acid with propanol isomers over dodecatungstophosphoric acid supported on montmorillonite k10}, journal = {Journal of Physical Organic Chemistry}, volume = {27}, number = {2}, year = {2014}, month = {FEB}, pages = {121-127}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Esterification of acetic acid with propanol isomers such as isopropanol and naEuropropanol was carried out over dodecatungstophosphoric acid (DTPA), dodecamolybdophosphoric acid ammonium salt hydrate, and sodium tungstate hydrated purified supported on montmorillonite K10, which were characterized by powder XaEuroray diffraction, BrunaueraEuro{\textquoteright}EmmettaEuro{\textquoteright}Teller, and temperature programmed ammonia desorption. A pseudoaEurohomogeneous (PaEuroH) kinetic model was established for esterification of acetic acid with propanol isomers over DTPA supported on montmorillonite K10. Effects of various parameters such as reaction time, speed of agitation, particle size, temperature, percent catalyst loading, molar ratio and mixture of propanol isomer were investigated in detail. The 20\% (w/w) DTPA/K10 was found to be an optimum solid catalyst with 82\% naEuropropanol and 53\% isopropanol conversion with 100\% selectivity toward propyl acetate. The 20\% (w/w) DTPA/K10 catalyst was found to be reusable for three cycles. The reaction follows secondaEuroorder kinetics with activation energies of 25.53aEuro?kJaEuro?mol(a?{\textquoteright}1) and 28.15aEuro?kJaEuro?mol(a?{\textquoteright}1) for isopropanol and naEuropropanol, respectively. PseudoaEurohomogeneous kinetic model fitted with R-2 value of trend line 0.999. This implies that esterification reaction is kinetically controlled owing to high activation energy. Copyright a (c) 2013 John Wiley \& Sons, Ltd.

}, keywords = {Acetic acid, dodecatungstophosphoric acid, Esterification, kinetic model, montmorillonite K10}, issn = {0894-3230}, doi = {10.1002/poc.3249}, author = {Gurav, Hanumant R. and Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000328892300038, title = {Quantum confinement controlled solar hydrogen production from hydrogen sulfide using a highly stable CdS0.5Se0.5/CdSe quantum dot-glass nanosystem}, journal = {Nanoscale}, volume = {6}, number = {2}, year = {2014}, month = {OCT}, pages = {908-915}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We have demonstrated unique CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems with quantum confinement effect. The stable, monodispersed CdS0.5Se0.5 and CdSe quantum dots (QDs) of size 2 to 12 nm have been grown in a germanate glass matrix by a simple melt quench technique at moderate temperature. XRD and Raman studies show formation of hexagonal CdS0.5Se0.5 and CdSe in the glass matrix. The quantum confinement of CdS0.5Se0.5 and CdSe was studied using TEM and UV-Vis spectroscopy. The band gap of the glass nanosystem was tuned from 3.6 to 1.8 eV by controlling the CdS0.5Se0.5 quantum dot size in the glass matrix. It can be further tuned to 1.68 eV using growth of CdSe quantum dots in the glass matrix. Considering the tuneable band gap of the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystem for the visible light absorption, a study of size tuneable photocatalytic activity for hydrogen generation from hydrogen sulfide splitting was performed under visible light irradiation for the first time. The utmost hydrogen evolution, i.e. 8164.53 and 7257.36 mu mol h(-1) g(-1) was obtained for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. The apparent quantum yield (AQY) was observed to be 26\% and 21\% for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. It is noteworthy that the present glass nanosystem as a photocatalyst was found to be very stable as compared to naked powder photocatalysts.

}, issn = {2040-3364}, doi = {10.1039/c3nr04898e}, author = {Apte, Sanjay K. and Garaje, Sunil N. and Naik, Sonali D. and Waichal, Rupali P. and Baeg, Jin-Ook and Kale, Bharat B.} } @article { ISI:000340446300077, title = {Random copolyesters containing perylene bisimide: flexible films and fluorescent fibers}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {15}, year = {2014}, month = {AUG}, pages = {12457-12466}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Random copolyesters of poly(L-lactic acid) (PLLA) and [poly-(1,4-cyclohexylenedimethylene-1,4- cyclohexanedicarboxylate)] (PCCD) incorporating varying mol ratios of perylene bisimide (PBI) were developed via a high-temperature solution-blending approach. PCCD incorporating PBI was developed by melt polycondenzation followed by a polyester-polyester transesterification reaction between PCCD PBI and PLLA. The polymers exhibited good solubility in common organic solvents and formed free-standing films, which showed bright red emission upon irradiation with ultraviolet radiation. A solid state fluorescence quantum yield of 10\% was observed for this PBI based polyester, which was much higher than that reported in literature for PBI based polymers in the solid state (\<1\%). Strong red fluorescent nanofibers of these polymers were successfully constructed by electrospinning technique. A random copolyester incorporating donor based on oligo(p-pheneylenevinylene) (OPV) and PBI as acceptor chromophore was also synthesized and fluorescence microscopy images of the electrospun fibers of this polymer exhibited blue, green and red emission upon excitation at different wavelengths. The high temperature solution blending approach involving a high molecular weight polymer and a suitably functionalized it conjugated molecule described here is a unique method by which 1D nanostructures of a wide range of pi-conjugated chromophores could be fabricated having strong fluorescence, with the scope of application in nanoscale optoelectronics, biological devices, as well as sensing.

}, keywords = {flexible film, fluorescent nanofibers, luminescent film, oligo(p-phenylenevinylene), perylene bisimide}, issn = {1944-8244}, doi = {10.1021/am502248u}, author = {Nisha, S. Kumari and Asha, S. K.} } @article { ISI:000342254500047, title = {Reaction between lawsone and aminophenol derivatives: synthesis, characterization, molecular structures and antiproliferative activity}, journal = {Journal of Molecular Structure}, volume = {1075}, year = {2014}, month = {OCT}, pages = {397-405}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction between two bioreductive reactants lawsone (2-hydroxy-1,4-napthoquinone) and derivatives 2-aminophenol without catalyst is reported. The reaction between lawsone and 4-chloro-2-aminophenol leads to formation of red colored major product 1A:[2-[(5-chloro-hydroxyphenyl)amino]naphthalene-1,4-dione] and fluorescent orange colored minor compound 1B:[10-chloro-benzo[alpha]phenoxazine-5-one]. Molecular structure of 1A and 1B were determined by single crystal X-ray diffraction. Two mechanisms were proposed to the formation of red 1A and 1B. {\textquoteleft}Ortho-para{\textquoteright} tautomeric equilibrium was observed in DMSO-d(6) solution in 1A, which was revealed by H-1, C-13 NMR and LC-MS studies. Molecules of 1A formed dimers via N-H center dot center dot center dot O interaction and polymeric chain of dimers was formed by OH center dot center dot center dot O interactions. Cl center dot center dot center dot Cl interactions were observed between the polymeric chains of dimers in 1A. Molecules of 1B show Cl center dot center dot center dot N interaction. Antiproliferative properties is studied for 1A-5A compounds (obtained by the reaction of lawsone with 2-amino-4-methylpheno1;2A, 2-aminopheno1;3A, 3-aminophenol;4A and 4-aminophenol;5A) and evaluated against two cancer cell lines, THP1 (human monocytic leukemia cells) and COLO205 (colorectal adenocarcinoma) and one normal cell line, HEK293T (human embryonic kidney). The values of 50\% inhibitory concentration (IC50) of compounds 1A-5A was determined using XTT assay. The cytotoxic effects of compounds 2A and 3A were observed against COLO205 and compounds 4A and 5A on THP1 were observed to be higher in comparison to their effect on HEK293T cell lines. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Aminonaphthoquinone, Aminophenol, Benzo[alpha]phenoxazine, Cl center dot center dot center dot N interactions, Lawsone, pi-pi stacking interaction}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2014.07.007}, author = {Kathawate, Laxmi and Joshi, Pranya V. and Dash, Tapan Kumar and Pal, Sanjima and Nikalje, Milind and Weyhermueller, Thomas and Puranik, Vedavati G. and Konkimalla, V. Badireenath and Salunke-Gawali, Sunita} } @article { ISI:000346385900016, title = {Relativistic equation-of-motion coupled-cluster method for the ionization problem: application to molecules}, journal = {Physical Review A}, volume = {90}, number = {6}, year = {2014}, month = {DEC}, pages = {Article No. 062501}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We report the implementation of the four-component spinor relativistic equation-of-motion (EOM) coupled-cluster method within the single- and double-excitation approximation to calculate the ionization potential of molecules. We have applied this method to calculate vertical ionization potentials of the molecules XH (X = F, Cl, Br, I) along with Cl-2 and Br-2 in their closed-shell configuration. We have also presented intermediate results using the second-order many-body perturbation-theory level in the EOM framework to understand the role of electron correlation. All the calculated values are compared with the available experimental results. Our results are found to be in good agreement with sophisticated experiments, and relative deviation of less than 1\% is achieved for all the considered systems.

}, issn = {1050-2947}, doi = {10.1103/PhysRevA.90.062501}, author = {Pathak, Himadri and Sasmal, Sudip and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article { ISI:000344330800015, title = {Role of nanointerfaces in Cu- and Cu plus Au-based near-ambient-temperature CO oxidation catalysts}, journal = {ChemCatChem}, volume = {6}, number = {11}, year = {2014}, month = {NOV}, pages = {3116-3124}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Disordered mesoporous Cu-doped ceria-zirconia (Cu0.1Ce0.85Zr0.05O2), and gold deposited (Au/Cu0.1Ce0.85Zr0.05O2) catalysts were synthesized and evaluated for CO oxidation. Onset of CO oxidation activity, and 50\% (100\%) CO2 formation occurs at room temperature (RT), and 77 (120)degrees C, respectively, with Cu0.1Ce0.85Zr0.05O2. A small amount of gold on Cu0.1Ce0.85Zr0.05O2 induces the sustainable oxidation catalysis around RT. Onset of copper reduction temperature decreases from 110 degrees C on Cu0.1Ce0.85Zr0.05O2 to 48 degrees C with Au/Cu0.1Ce0.85Zr0.05O2, highlighting the direct interaction between Cu and Au through a Cu-Au interface. Au particles with a (00 1) facet deposit on an oxygen-deficient site of (111) facet of CeO2-ZrO2. Any decrease in surface Cu-content with increasing Au-content further supports the Au-Cu-Ce/Zr interface interactions. Nanointerfaces of Au clusters on Cu next to oxygen-deficient sites of CeO2-ZrO2 facilitate all the elementary steps of the CO + O-2 reaction to occur in close proximity at ambient conditions.

}, keywords = {carbon monoxide, Gold, heterogeneous catalysis, Oxidation, redox}, issn = {1867-3880}, doi = {10.1002/cctc.201402581}, author = {Gnanakumar, Edwin S. and Naik, Jarpla Madhusudhan and Manikandan, Marimuthu and Raja, Thirumalaiswamy and Gopinath, Chinnakonda S.} } @article { ISI:000341339300024, title = {Second generation, arginine-rich (R-X {\textquoteleft}-R)(4)-type cell-penetrating alpha-omega-alpha-peptides with constrained, chiral omega-amino acids (X {\textquoteleft}) for enhanced cargo delivery into cells}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {24}, number = {17}, year = {2014}, month = {SEP}, pages = {4198-4202}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The syntheses of novel N-aminoalkyl proline-derived spacers (X{\textquoteright}) in polycationic (R-X{\textquoteright}-R)-motif cell-penetrating alpha-omega-alpha-peptides are described as improved molecular transporters and their structural features studied by CD. FACS analysis shows enhanced cellular uptake and confocal microscopy indicates predominantly cytoplasmic localization. The oligomers are efficient at transporting pDNA into cells. The chirality together with the hydrophobicity and flexibility derived from the spacer chain are found to have marked influence on the cell-penetrating and cargo delivery properties of the cell-penetrating peptides (CPPs). The peptides containing N-(3-aminopropyl)-D-proline spacers are found to be the best at cell penetration and cargo delivery in the present study. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {(R-X-R)-motif, alpha-omega-alpha-Peptide, Cell-penetrating peptide, Constrained chiral amino acid, Peptidomimetics}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2014.07.040}, author = {Patil, Kiran M. and Naik, Rangeetha J. and Vij, Manika and Yadav, Amit K. and Kumar, Vaijayanti A. and Ganguli, Munia and Fernandes, Moneesha} } @article { ISI:000340427600056, title = {Selective synthesis of propofol (2,6-diisopropylphenol), an intravenous anesthetic drug, by isopropylation of phenol over H-beta and H-mordenite}, journal = {RSC Advances}, volume = {4}, number = {61}, year = {2014}, month = {JUL}, pages = {32467-32474}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Propofol (2,6-diisopropylphenol/DIPP) is the world{\textquoteright}s most widely used intravenous general anesthetic and is typically synthesized by isopropylation of phenol over an acid catalyst. It is highly difficult to stabilize bio-oil containing phenolic compounds. The isopropylation of this phenol (a model compound representing species in bio-oils) is one of the options to stabilize the bio-oil and convert it into valuable products. Probably for the first time, H-beta- and H-mordenite-catalysed vapour phase isopropylation of phenol with isopropyl alcohol (IPA) was studied to selectively synthesize DIPP. The optimization of various operating parameters such as molar ratio (phenol : IPA), weight hourly space velocity (WHSV), reaction temperature and time on stream were performed. H-beta (94\% phenol conv. and 56\% DIPP sel.) was found to be a potential and more active catalyst than H-mordenite (68\% phenol conv. and 43\% DIPP sel.) at optimized process parameters. A kinetic model is proposed to probe the intricate reaction kinetics and validated (R-2 \> 0.98) by the experimental results. H-beta catalyst was observed to be stable for more than 25 h with 94\% phenol conversion and 56\% selectivity towards DIPP at optimized process parameters. The phenol conversion and DIPP selectivity obtained in the present study are higher than those reported so far. The activation energy obtained for isopropylation of phenol with IPA over H-beta is calculated to be 25.39 kJ mol(-1).

}, issn = {2046-2069}, doi = {10.1039/c4ra03004d}, author = {Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000330812400022, title = {Single-pot formation of THFAL via catalytic hydrogenation of FFR over Pd/MFI catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {2}, number = {2}, year = {2014}, month = {FEB}, pages = {272-281}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Furfural (FFR) was selectively hydrogenated in a single pot to tetrahydrofurfuryl alcohol (THFAL) over a Si MFI molecular sieve supported Pd catalyst. Studies on catalyst screening revealed that both the metal function and the support were critical for directing the selectivity to the ringhydrogenated product, THFAL. The structural feature of MFI as shown by XRD was completely retained in the used sample of the 3\% Pd/MFI catalyst confirming its stability under reaction conditions. XRD, along with SEM characterization of the used samples, established retention of morphology of the structured silicate, suggesting a strong interaction between hexagonal porous silicate and Pd particles. The complete conversion of FFR with an enhanced selectivity of 95\% to THFAL could be achieved by recycling the crude of the first hydrogenation experiment over the same 3\% Pd/MFI catalyst.

}, keywords = {Biomass conversion, Hydrogenation, Pd/MFI, Recyclability, THFAL}, issn = {2168-0485}, doi = {10.1021/sc400302b}, author = {Biradar, Narayan S. and Hengne, Amol M. and Birajdar, Shobha N. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Rode, Chandrashekhar V.} } @article { ISI:000341544200034, title = {Sol-gel assisted fabrication of collagen hydrolysate composite scaffold: a novel therapeutic alternative to the traditional collagen scaffold}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {17}, year = {2014}, month = {SEP}, pages = {15015-15025}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Collagen is one of the most widely used biomaterial for various biomedical applications. In this Research Article, we present a novel approach of using collagen hydrolysate, smaller fragments of collagen, as an alternative to traditionally used collagen scaffold. Collagen hydrolysate composite scaffold (CHCS) was fabricated with sol-gel transition procedure using tetraethoxysilane as the silica precursor. CHCS exhibits porous morphology with pore sizes varying between 380 and 780 mu m. Incorporation of silica conferred CHCS with controlled biodegradation and better water uptake capacity. Notably, 3T3 fibroblast proliferation was seen to be significantly better under CHCS treatment when compared to treatment with collagen scaffold. Additionally, CHCS showed excellent antimicrobial activity against the wound pathogens Staphylococcus aureus, Bacillus subtilis, and Escherichia coli due to the inherited antimicrobial activity of collagen hydrolysate. In vivo wound healing experiments with full thickness excision wounds in rat model demonstrated that wounds treated with CHCS showed accelerated healing when compared to wounds treated with collagen scaffold. These findings indicate that the CHCS scaffold from collagen fragments would be an effective and affordable alternative to the traditionally used collagen structural biomaterials.

}, keywords = {collagen, collagen hydrolysate, scaffold, sol-gel, tissue engineering, wound Healing}, issn = {1944-8244}, doi = {10.1021/am502948g}, author = {Ramadass, Satiesh Kumar and Perumal, Sathiamurthi and Gopinath, Arun and Nisal, Anuya and Subramanian, Saravanan and Madhan, Balaraman} } @article { ISI:000345295000001, title = {Special issue section commemorating Prof. J. B. Joshi}, journal = {Canadian Journal of Chemical Engineering}, volume = {92}, number = {12}, year = {2014}, month = {DEC}, pages = {2011-2012}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, issn = {0008-4034}, doi = {10.1002/cjce.22069}, author = {Nandakumar, K. and Kulkarni, A.} } @article { ISI:000340216300010, title = {Supramolecular P4VP-pentadecylphenol naphthatenebisimide comb-polymer: mesoscopic organization and charge transport properties}, journal = {Journal of Materials Chemistry C}, volume = {2}, number = {32}, year = {2014}, month = {AUG}, pages = {6511-6519}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A supramolecular comb polymer of pentadecyl phenol (PDP) substituted naphthalenebisimide (PDP-UNBI) with poly(4-vinylpyridine) (P4VP) is reported. The mesoscopic organization within the P4VP(PDP-UNBI), complexes was studied using wide-angle X-ray diffraction (WXRD) technicjues. The packing diagram obtained from the single-crystal XRD analysis of the PDP-UNBI crystals gave a clear picture of the initial arrangement present in self-associated PDP-UNBI alone. Correlating this with the XRD data of the hydrogen-bonded polymer complex provided insight into the probable packing of the P4VP chains within the crystalline lattice of PDP-UNBI leading to a highly ordered lamellar packing. Transmission electron microscopy (TEM) revealed the uniform mesomorphic lamellar structures in the domain range of similar to 5-10 nm. Furthermore, the charge carrier mobility measurements observed from space-charge-limited current (SCLC) measurements demonstrated that transport behaviour of the hydrogen-bonded P4VP(PDP-UNBI) complex (2 x 10(-2) cm(2) V-1 s(-1)) was comparable to that of the crystalline naphthalenebisimide molecule itself (9 x 10(-3) cm(2) V-1 s(-1)), which is a great achievement, since the complex now offers a package of solution-processable n-type semiconductor polymer with mobility equivalent to that of a small crystalline molecule.

}, issn = {2050-7526}, doi = {10.1039/c4tc00611a}, author = {Narayan, Rekha and Kumar, Prashant and Narayan, K. S. and Asha, S. K.} } @article {46372, title = {Supramolecular synthon hierarchy in bumetanide cocrystals}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {FEB}, pages = {C721}, type = {Meeting Abstract}, keywords = {Novel cocrystals of sulfonamide drug Bumetanide with carboxamides are developed based on supramolecular synthons approach}, issn = {2053-2733}, author = {Allu, Suryanarayana and Bolla, Geetha and Tothadi, Srinu and Nangia, Ashwini} } @article { ISI:000330147900013, title = {Synthesis, characterization and molecular structures of homologated analogs of 2-bromo-3-(n-alkylamino)-1,4-napthoquinone}, journal = {Journal of Molecular Structure}, volume = {1056}, year = {2014}, month = {JAN}, pages = {97-103}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Four analogues of 2-bromo-3-(n-alkylamino)-1,4-napthoquinone (where n-alkyl is methyl in L-1Br, ethyl in L-2Br, propyl in L-3Br and butyl in L-4Br) are synthesized and characterized. A reaction mechanism is proposed for the formation of L-1 Br to L-4Br from the starting material 2,3-dibromo-1,4-naphthoquinone. The v(N-H) frequency in the FT-IR spectra is affected by the intramolecular hydrogen bonding in L-1Br to L-4Br and is observed similar to 3267 cm(-1) in L-2Br. A shift of similar to 25 cm(-1) is observed in the v(C-Br) frequency in all the compounds as compared to 2,3-dibromo-1,4-naphthoquinone (627 cm(-1)). A broad charge transfer band is observed between 400 and 600 nm in the UV-Vis spectra, which imparts red colour to all the compounds. Molecular structures of L-2Br and L-3Br were studied by single crystal X-ray diffraction studies. Molecules of L-2Br crystallize in Pca2(1), whereas the molecule L-3Br crystallizes in the P-1 space group. Molecules of L-2Br forms a polymeric chain through N-H...O interaction and forms beautiful butterfly like arrangement of molecules when viewed down the {\textquoteleft}a{\textquoteright} axis. Ladder like polymeric chain of molecules is observed in L-3Br via C-H...O and N-H...O interactions. Every alternating neighbouring chains of L-3Br, show pi-pi stacking interactions between the quinonoid rings of the molecules, however this interaction is not observed in L-2Br. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {2, 3-Dibromo-1, 4-naphthoquinone, Aminonaphthoquinone, hydrogen bonding, Michael addition, pi-pi stacking}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2013.10.016}, author = {Salunke-Gawali, Sunita and Pawar, Omkar and Nikalje, Milind and Patil, Rishikesh and Weyhermueller, Thomas and Puranik, Vedavati G. and Konkimalla, V. Badireenath} } @article { ISI:000338348000023, title = {Synthesis, characterization and photocatalytic behavior of TiO2-SiO2 mesoporous composites in hydrogen generation from water splitting}, journal = {Journal of Materials Science}, volume = {49}, number = {18}, year = {2014}, month = {SEP}, pages = {6383-6391}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

TiO2-SiO2 mesoporous composite photocatalysts with different proportions (in wt\%) of TiO2 and SiO2 (TiO2-SiO2 = 20:80, 40:60, 60:40, 80:20 and 100:0) were prepared by loading TiO2 on as-synthesized Si-MCM-41 using sol-gel method. The physicochemical properties of composites were investigated by powder X-ray diffraction, N-2 adsorption-desorption measurements, transmission electron microscopy and UV-Vis diffuse reflectance spectroscopy. It is revealed that the titanium species are dispersed as TiO2 having interaction with the surface of the support. Even at high TiO2 loading, the mesostructural feature of MCM-41 was found to be intact without pore blockages. The change in morphology of TiO2 particle was observed with increase in TiO2 loading which may be due to different environment for the growth of TiO2. The photocatalytic evaluation of composites was carried out in production of hydrogen by water splitting. Among the prepared samples, mesoporous composite containing 60 \% TiO2 (MTi60) has shown the best results (0.08805 mmol of H-2/h/g of TiO2) compared to other composite photocatalysts. The catalytic performance of this sample was further enhanced (similar to 8 times) after loading 1 \% Pt in water splitting (0.70161 mmol of H-2/h/g of TiO2). 1 \% Pt loaded on pure TiO2 (MTi100) showed hydrogen evolution of the magnitude 0.26 mmol of H-2/h/g of TiO2. TiO2-SiO2 mesoporous composite photocatalyst showed much higher activity (similar to 1.9 times) than amorphous silica-embedded titania catalyst having same composition.

}, issn = {0022-2461}, doi = {10.1007/s10853-014-8365-2}, author = {Niphadkar, P. S. and Chitale, S. K. and Sonar, S. K. and Deshpande, Suvarna S. and Joshi, P. N. and Awate, S. V.} } @article { ISI:000333686000001, title = {Synthesis of ciprofloxacin-conjugated poly(L-lactic acid) polymer for nanofiber fabrication and antibacterial evaluation}, journal = {International Journal of Nanomedicine}, volume = {9}, year = {2014}, month = {MAR}, pages = {1463-1477}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Ciprofloxacin was conjugated with polylactide (PLA) via the secondary amine group of the piperazine ring using PLA and 7-(4-(2-Chloroacetyl) piperazin-1-yl)-1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxoquinoline-3-carboxylic acid. Zinc prolinate, a biocompatible catalyst was synthesized, characterized, and used in ring opening polymerization of L-lactide. Five different kinds of OH-terminated poly(L-lactide) (two-, three-, four-, six-arm, star-shaped) homopolymers were synthesized by ring opening polymerization of L-lactide in the presence of dodecanol, glycerol, pentaerythritol, dipentaerythritol as initiator and zinc prolinate as a catalyst. The structures of the polymers and conjugates were thoroughly characterized by means of gel permeation chromatography, matrix-assisted laser desorption/ionization-time of flight mass spectrometry, and nuclear magnetic resonance spectroscopy. PLA (molecular weight = 100,000) and ciprofloxacin conjugated PLA were used for fabrication of nonwoven nanofiber mat (diameter ranges; 150-400 nm) having pore size (62-102 nm) using electrospinning. The microbiological assessment shows that the release of ciprofloxacin possesses antimicrobial activity. The drug-release behavior of the mat was studied to reveal potential application as a drug delivery system. The result shows that the ciprofloxacin release rates of the PLA conjugate nonwoven nanofiber mat could be controlled by the drug loading content and the release medium. The development of a biodegradable ciprofloxacin system, based on nonwoven nanofiber mat, should be of great interest in drug delivery systems.

}, keywords = {antibacterial activity, ciprofloxacin conjugated polylactides, CP-PLA, drug release, electrospinning, MDR, nonwoven nanofibers, zinc prolinate}, issn = {1178-2013}, doi = {10.2147/IJN.S54971}, author = {Parwe, Sharad P. and Chaudhari, Priti N. and Mohite, Kavita K. and Selukar, Balaji S. and Nande, Smita S. and Garnaik, Baijayantimala} } @article { ISI:000343985600001, title = {Synthetic turn mimetics and hairpin nucleators: quo vadimus?}, journal = {Chemical Communications}, volume = {50}, number = {90}, year = {2014}, month = {OCT}, pages = {13874-13884}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Structural mimicry of peptides has witnessed perceptible progress in the last three decades. Reverse turn and beta-hairpin units are the smallest secondary structural motifs that are some of the most scrutinized functional cores of peptides and proteins. The practice of mimicking, without altering the function of the bioactive core, ranges from conformational locking of the basic skeleton to total replacement of structural architecture using synthetic analogues. Development of heterogeneous backbones - using unnatural residues in place of natural ones - has broadened further opportunities for efficient structural rigidification. This feature article endeavours to trail the path of progress achieved hitherto and envisage the possibilities that lie ahead in the development of synthetic turn mimetics and hairpin nucleators.

}, issn = {1359-7345}, doi = {10.1039/c4cc03114h}, author = {Nair, Roshna V. and Baravkar, Sachin B. and Ingole, Tukaram S. and Sanjayan, Gangadhar J.} } @article {45935, title = {(Thio)urea-mediated benzoxazinone opening: mild approach towards synthesis of o-(substituted amido)benzamides}, journal = {RSC Advances}, volume = {4}, year = {2014}, month = {NOV}, pages = {6858 to 7367}, type = {Journal Article}, abstract = {C-terminal activation of N-acylated o-aminobenzoic acids and their derivatives during coupling reactions with amines would often pose a challenge due to the formation of a benzoxazinone intermediate, which may resist reacting with amines. This communication reports a mild approach towards the installation of an amide bond via benzoxazinone ring opening utilizing Schreiner{\textquoteright}s (thio)urea organocatalyst. Peptide coupling reactions oen encounter major hurdles because of the formation of side products during carbonyl activation of various amino acids, like N-carboxyanhydride, diketopiperazine etc. 1 1,3-benzoxazinones (Fig. 1) are a class of heterocyclic side products obtained upon C-terminal activation of anthranilic acid and their derivatives due to the intra-molecular cyclization of the benzamide oxygen, resulting in trace or no coupling. 2 Strategies meant either to avert its formation in situ or to react it with amines have been attempted through heating the reactants at elevated temperatures 3 and/or in the presence of bases. 2b,c However, such drastic conditions may cause quinazoline formation as well, owing to a second cyclodehydration of the coupled product. Moreover, applying such drastic conditions to amino acids may not be advisable due to the possibility of epimerization. We have been interested for quite some time in the devel-opment of foldamers containing the Ant{\textendash}Pro reverse-turn motif (Ant {\textonequarter} anthranilic acid, Pro {\textonequarter} proline), Fig. 1. 4 The striking feature of this motif is its robust 9-membered-ring intra-molecular H-bonding network. Occasionally, the formation of a benzoxazinone intermediate causes a drastic fall in the yield of coupled products. 5 Owing to the reduced reactivity of benzox-azinones towards amine nucleophiles, we attempted different conditions, such as heating the reaction mixture and under microwave conditions. Unfortunately, these procedures led to only partial conversion of the oxazinone into the product. Aer extensive effort, we were successful in developing an efficient method for coupling a range of isolated benzoxazinone inter-mediates via nucleophilic ring-opening utilizing DBU (1,8-dia-zabicycloundec-7-ene) in DMF containing A molecular sieves. 5 However, in a few cases, this method produced only meagre yields of the coupled product. One such instance was the reac-tion of 2-(2-azidopropan-2-yl)-2H-benzo[d][1,3]oxazin-4-one 1a, Table 1 (isolated as the major by-product on activation of 2-(2-azido-2-methylpropanamido)benzoic acid) with H-L Pro-OBn to obtain compound 2a. Scanty yields of the product isolated under DBU-mediated opening conditions impelled us to explore a carbonyl activation route to open the azlactone moiety. Hence, we employed some lactone activating agents, such as Sc(OTf) 3 , Ti(O i Pr) 4 etc., but none of the trials were rewarding.}, issn = {2046-2069}, doi = { 10.1039/c3ra45903a}, author = {Nair, R. V. and Sanjayan, G. J.} } @article { ISI:000331774700017, title = {Two-in-one: inherent anhydrous and water-assisted high proton conduction in a 3D metal-organic framework}, journal = {Angewandte Chemie-International Edition}, volume = {53}, number = {10}, year = {2014}, month = {MAR}, pages = {2638-2642}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The development of solid-state proton-conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel-cell technology. A 3Dmetal-organic framework (MOF) with acid-base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water-assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid-state proton-conducting materials that work under both anhydrous and humid conditions.

}, keywords = {conducting materials, fuel cells, metal-organic frameworks, porous materials, proton conduction}, issn = {1433-7851}, doi = {10.1002/anie.201309077}, author = {Nagarkar, Sanjog S. and Unni, SreeKuttan M. and Sharma, Amitosh and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article { ISI:000330812400027, title = {Uptake of Azo dyes into silk glands for production of colored silk cocoons using a green feeding approach}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {2}, number = {2}, year = {2014}, month = {FEB}, pages = {312-317}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Dyeing of textile fabrics is considered to be one of the most polluting industries today, and there is a need to develop green processes that can reduce this pollution. A promising technology that can potentially cleanup the dyeing of silk fibers that are widely used for textile applications would involve the generation of intrinsically colored silk cocoons. This can be achieved by feeding of Bombyx mori silkworm larvae with a modified feed of mulberry leaves containing a sprayed dye solution. This process significantly reduces the need for treating toxic dye effluents that are generated in traditional dyeing processes. In this report, we have evaluated a set of seven different azo dyes that are used in the textile industry for dyeing to produce intrinsically dyed silk. The dyes used in the study had similar chemical structures with systematically varying partition coefficients. The results suggest that while some dyes produced intrinsically colored silk other did not. Careful evaluation of the physical properties of these related azo dyes suggest that the balance of hydrophobic and hydrophilic character is necessary for diffusion of the dye from the alimentary canal of the silkworm larva into the hemolymph and later into the silk glands. The partition coefficient of the dye also determines the preferential association of the dye with either sericin or fibroin protein in the silkworm gland and finally into the cocoon. These insights are extremely important in development of novel dye molecules that can be successfully fed to Bombyx mori silkworm larvae for producing intrinsically colored silk of various colors and shades.

}, keywords = {Azo dyes, Biochemical pathways, Color silk, Dye uptake, {\textquoteleft}{\textquoteright} Green {\textquoteleft}{\textquoteright} silk}, issn = {2168-0485}, doi = {10.1021/sc400355k}, author = {Nisal, Anuya and Trivedy, Kanika and Mohammad, Hasan and Panneri, Suyana and Sen Gupta, Sayam and Lele, Ashish K. and Manchala, Ramesh and Kumar, Nirmal S. and Gadgil, Mugdha and Khandelwal, Harish B. and More, Snehal and Laxman, Ryali Seeta} } @article { ISI:000336738400017, title = {Variation of CO2 adsorption in isostructural Cd(II)/Co(II) based MOFs by anion modulation}, journal = {CrystEngComm}, volume = {16}, number = {23}, year = {2014}, month = {JUN}, pages = {5012-5020}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

{A potential multidentate tris-pyridyl ligand has been synthesized, and later employed for the tailoring of four isostructural cadmium(II)/cobalt(II) two dimensional (2D) metal organic frameworks, [[ M(dmpt)(2)(X)(2)].xS](n), where S = solvent

}, issn = {1466-8033}, doi = {10.1039/c4ce00058g}, author = {Singh, Udai P. and Narang, Shikha and Pachfule, Pradip and Banerjee, Rahul} } @article { ISI:000355985500014, title = {1,2,3-Triazole derivatives as antitubercular agents: synthesis, biological evaluation and molecular docking study}, journal = {MedChemComm}, volume = {6}, number = {6}, year = {2015}, month = {MAY}, pages = {1104-1116}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Searching for new active molecules against Mycobacterium tuberculosis (MTB) H37Ra, a small focused library of 1,2,3-triazoles has been efficiently prepared via a click chemistry approach. The newly synthesized compounds were tested against drug-sensitive MTB. Several derivatives were found to be promising inhibitors of MTB characterized by lower MIC values (5.8-29.9 mu g mL(-1)). Among all the synthesized 31 compounds, 15e was the most active compound against MTB. Based on the results from the antitubercular activity, SAR for the synthesized series has been developed. The active compounds from the anti-tubercular study were further tested for anti-proliferative activity against THP-1, A549 and PANC-1 cell lines using MTT assay and showed no significant cytotoxic activity against these three cell lines except THP-1 at the maximum concentration evaluated. Further, the synthesized compounds were found to have potential antioxidant activities with an IC50 range of 10.1-37.3 mu g mL(-1). The molecular docking study of the synthesized compounds was performed against the DprE1 enzyme of MTB to understand the binding interactions. Moreover, the synthesized compounds were also analysed for ADME properties and all the experimental results promote us to consider this series as a starting point for the development of novel and more potent anti-tubercular agents in the future.

}, issn = {2040-2503}, doi = {10.1039/c5md00057b}, author = {Shaikh, Mubarak H. and Subhedar, Dnyaneshwar D. and Nawale, Laxman and Sarkar, Dhiman and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Shingate, Bapurao B.} } @article { ISI:000348357400007, title = {Acid stability of the kinetically stable alkaline serine protease possessing polyproline II fold}, journal = {Protein Journal}, volume = {34}, number = {1}, year = {2015}, month = {FEB}, pages = {60-67}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The kinetically stable alkaline serine protease from Nocardiopsis sp.; NprotI, possessing polyproline II fold (PPII) was characterized for its pH stability using proteolytic assay, fluorescence and Circular Dichroism (CD) spectroscopy, and Differential Scanning Calorimetry (DSC). NprotI was found to be functionally stable when incubated at pH 1.0, even after 24 h, while after incubation at pH 10.0, drastic loss in the activity was observed. The enzyme showed enhanced activity after incubation at pH 1.0 and 3.0, at higher temperature (50-60 A degrees C). NprotI maintained the overall PPII fold in broad pH range as seen using far UV CD spectroscopy. The PPII fold of NprotI incubated at pH 1.0 remained fairly intact up to 70 A degrees C. Based on the isodichroic point and T-m values revealed by secondary structural transitions, different modes of thermal denaturation at pH 1.0, 5.0 and 10.0 were observed. DSC studies of NprotI incubated at acidic pH (pH 1.0-5.0) showed T-m values in the range of 74-76 A degrees C while significant decrease in T-m (63.8 A degrees C) was observed at pH 10.0. NprotI could be chemically denatured at pH 5.0 (stability pH) only with guanidine thiocynate. NprotI can be classified as type III protein among the three acid denatured states. Acid tolerant and thermostable NprotI can serve as a potential candidate for biotechnological applications.

}, keywords = {Acid stability, DSC, Kinetic stability, Polyproline fold, Protease, Thermal unfolding}, issn = {1572-3887}, doi = {10.1007/s10930-014-9597-3}, author = {Rohamare, Sonali and Javdekar, Vaishali and Dalal, Sayli A. and Nareddy, Pavan Kumar and Swamy, Musti J. and Gaikwad, Sushama M.} } @article { ISI:000354505100017, title = {Activation by pretreatment of Ag-Au/Al2O3 bimetallic catalyst to improve low temperature HC-SCR of NOx for lean burn engine exhaust}, journal = {Applied Catalysis B-Environmental}, volume = {174}, year = {2015}, month = {SEP}, pages = {145-156}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ag-Au/Al2O3 catalyst was synthesised by successive impregnation of 1\% Au and 1\% Ag on in-house prepared high surface area alumina (450 m(2)/g). The corresponding monometallic catalysts were also prepared by loading 1\% Ag or 1\% Au on the same high surface area alumina for comparison. The catalysts were characterised by various physico-chemical techniques and tested for SCR activity under lean burn engine exhaust conditions. Ag-Au/Al2O3 catalyst prepared by successive impregnation method showed considerably higher NO reduction (100\%) to N-2 compared to 1\% Au/Al2O3 (70\%) whereas the activity was comparable with that of 1\% Ag/Al2O3 (96\%). The effect of various pretreatments on SCR activity of Ag-Au/Al2O3 was studied and pretreatment at 250 degrees C in flow of hydrogen was found to give the best results with 100\% NO conversion to N-2 at 353 degrees C. Further ageing of the catalyst under reaction feed at 500 degrees C resulted in considerable increase in low temperature activity of bimetallic catalyst with similar to 40\% NO conversion at 222 degrees C. Even though the SCR activity of pretreated Ag-Au/Al2O3 and Ag/Al2O3 were comparable, after ageing the Ag-Au/Al2O3 showed significantly higher NO conversion (95\%) compared to Ag/Al2O3 (83\%) and Au/Al2O3 (70\%). The formation of H-2 and CO due to steam reforming of higher hydrocarbon (decane) was evidenced at the temperature of highest deNO(x) activity. Detailed investigation of the textural properties of the pretreated and aged catalysts showed presence of well dispersed metallic Au and Ag-n(delta+) clusters after pretreatment in hydrogen at 250 degrees C. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Ag-Au bimetallic catalyst, Catalyst ageing, dispersion, Low temperature HC-SCR, Steam reforming}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2015.02.035}, author = {More, Pavan M. and Nguyen, Duy L. and Granger, Pascal and Dujardin, Christophe and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article {43075, title = {Analytical and bioanalytical UHPLC-MS method validation for determination of metformin, a bigunaide and sitagliptin, a DPP-4 inhibitor}, journal = {International Journal of Pharmacy and Pharmaceutical Sciences}, volume = {6}, year = {2015}, month = {MAY}, pages = {1000-1008}, doi = {10.13040/IJPSR.0975-8232.6(5).1907-14}, author = {Nakrani, Mital and Bairagee, Deepika and Goyal, Pradeep and Santhakumari, B.} } @article { ISI:000359537000086, title = {Antibiofilm activity of tert-BuOH functionalized ionic liquids with methylsulfonate counteranions}, journal = {RSC Advances}, volume = {5}, number = {83}, year = {2015}, month = {AUG}, pages = {68136-68142}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of varying alkyl chain length substituted tert-BuOH-functionalized-imidazolium mesylate salts [alkyl-(t)OHim][OMs] were synthesized and evaluated for antimicrobial activity and antibiofilm potential on selected pathogenic microorganisms including bacteria (Gram positive and Gram negative), yeast, and fungi. The dodecyl substituted ionic liquid [C-12-(t)OHim][OMs] significantly prevented the biofilm formation of S. epidermidis at 100 mu M concentration as well as showed noteworthy antimicrobial activity. We conclude that the ionic liquids (ILs) bearing chain lengths lower than the dodecyl length were found to be less effective against most of the tested pathogenic microorganisms.

}, issn = {2046-2069}, doi = {10.1039/c5ra12854d}, author = {Navale, Govinda R. and Dharne, Mahesh S. and Shinde, Sandip S.} } @article { ISI:000348878600053, title = {Benzylation of acetic acid to benzyl acetate over highly active and reusable micro/meso-HZSM-5}, journal = {Chemical Engineering Research \& Design}, volume = {93}, year = {2015}, month = {JAN}, pages = {584-590}, publisher = {INST CHEMICAL ENGINEERS}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

Catalytic benzylation of acetic acid (AA) with benzyl alcohol (BA) to benzyl acetate was studied over zeolites viz. H-ZSM-5 (microporous, medium pore), Micro/Meso-HZSM-5 (combination of micro- and meso pore), H-Beta (microporous, large pore) to investigate catalytic activity and selectivity towards benzyl acetate. Micro/Meso-HZSM-5 obtained by desilication post-treatment has been employed as a heterogeneous catalyst for benzylation reaction probably for the first time. Micro/Meso-HZSM-5 was found to be a promising catalyst for benzylation with AA conversion of 94\%, selectivity towards benzyl acetate of 95\%. The detailed optimization of process parameters such as molar ratio, catalyst loading, reaction temperature and time was also presented. Micro/Meso-HZSM-5 catalyst was observed to be stable for six cycles (1 fresh and 5 recycles). The first order reaction kinetics (R-2 \>0.98) indicated that reaction rate constants increased with increasing reaction temperature. The activation energy for benzylation of AA with BA over Micro/Meso-HZSM-5 was obtained to be 15.07 kJ mol(-1), which is far less than the reported. (C) 2014 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

}, keywords = {Acetic acid, Benzyl acetate, Benzyl alcohol, Benzylation, Micro/Meso-HZSM-5, Reaction kinetics}, issn = {0263-8762}, doi = {10.1016/j.cherd.2014.06.015}, author = {Nandiwale, Kakasaheb Y. and Galande, Nitish D. and Raut, Sunil A. and Bokade, Vijay V.} } @article { ISI:000353218700026, title = {Beta, gamma-Bis-substituted PNA with configurational and conformational switch: preferred binding to cDNA/RNA and cell-uptake studies}, journal = {Chemical Communications}, volume = {51}, number = {36}, year = {2015}, month = {MAR}, pages = {7693-7696}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

(S,S)- and (R,R)-beta,gamma-Bis-substituted PNAs were synthesized from the C-2 symmetric vicinal diamine system embedded in 1,4 dihydroxybutane and 1,4-dimethoxybutane scaffolds. (R,R)-beta,gamma-Bis-methoxymethyl-PNA derived from D-tartaric acid was found to be in the right configuration and conformation to be an excellent mimic of PNA, endowed with superior ability to enter into cells.

}, issn = {1359-7345}, doi = {10.1039/c5cc00891c}, author = {Bose, Tanaya and Banerjee, Anjan and Nahar, Smita and Maiti, Souvik and Kumar, Vaijayanti A.} } @article { ISI:000362920700039, title = {Bioinspired catecholic flame retardant nanocoating for flexible polyurethane foams}, journal = {Chemistry of Materials}, volume = {27}, number = {19}, year = {2015}, month = {OCT}, pages = {6784-6790}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient, environmentally friendly, and water-applied flame retardant surface nanocoating based on polydopamine (PDA) was developed for foamed materials such as polyurethane (PU). The PDA nanocoating, deposited by simple dip-coating in an aqueous dopamine solution, consists of a planar sublayer and a secondary granular layer structure that evolve together, eventually turning into a dense, uniform, and conformal layer on all foam surfaces. In contrast to flexible PU foams that are known to be highly flammable without flame retardant additives, micro combustion calorimetry (MCC) and thermogravimetric analysis (TGA) confirm that the neat PDA is relatively inflammable with a strong tendency to form carbonaceous, porous char that is highly advantageous for flame retardancy. By depositing nano coatings of PDA onto flexible PU foams, the flammability of the PU foam was significantly reduced with increasing coating thickness. For the thickest coating (3 days of PDA deposition), the foam quickly self-extinguished and its original shape was completely preserved after exposure to a flame in a torch burn test. In addition to the char forming ability of PDA, it is hypothesized that its catechol units likely scavenge nearby radicals that typically evolve additional fuel for the fire as they attack surrounding materials. This multiple flame retardancy action of PDA (i.e., char formation + radical scavenging) enables flame retardant foams with a peak heat release rate (P-HRR) that is significantly reduced (up to 67\%) relative to control foams, representing much better performance than many conventional additives reported in the literature at comparable or higher loadings.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.5b03013}, author = {Cho, Joon Hee and Vasagar, Vivek and Shanmuganathan, Kadhiravan and Jones, Amanda R. and Nazarenko, Sergei and Ellison, Christopher J.} } @article { ISI:000352315600048, title = {Biosynthesis of silver nanoparticles by using ganoderma-mushroom extract}, journal = {Modern Physics Letters B}, volume = {29}, number = {6-7, SI}, year = {2015}, month = {MAR}, pages = {1540047}, publisher = {WORLD SCIENTIFIC PUBL CO PTE LTD}, address = {5 TOH TUCK LINK, SINGAPORE 596224, SINGAPORE}, abstract = {

Present study reports the biochemical synthesis of silver nanoparticles (Ag-NPs) from aqueous medium by using the extract of medicinal mushroom Ganoderma, as a reducing and stabilizing agents. The Ag-NPs are prepared at room temperature by the reduction of Ag+ to Ag in aqueous solution of AgNO3. The resultant particles are characterized by using UV-visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) measurement techniques. The formation of Ag-NPs is confirmed by recording the UV-visible absorption spectra for surface plasmon resonance (SPR) where peak around 427 nm. The prominent changes observed in FTIR spectra supported the reduction of Ag+ to Ag. The morphological features of Ag-NPs are evaluated from HRTEM. The spherical Ag-NPs are observed in transmission electron microscopy (TEM) studies. The particle size distribution is found to be nearly uniform with average particle size of 2 nm. The Ag-NPs aged for 15, 30, 60 and 120 days showed no profound effect on the position of SPR peak in UV-visible studies, indicating the protecting/capping ability of medicinal mushroom Ganoderma in the synthesis of AgNPs.

}, keywords = {Biosynthesis, Ganoderma, medicinal mushroom, silver nanoparticles, UV-visible spectroscopy}, issn = {0217-9849}, doi = {10.1142/S0217984915400473}, author = {Ekar, S. U. and Khollam, Y. B. and Koinkar, Pankaj M. and Mirji, S. A. and Mane, R. S. and Naushad, M. and Jadhav, S. S.} } @article { ISI:000360653900022, title = {Calculation of P,T-odd interaction constant of PbF using Z-vector method in the relativistic coupled-cluster framework}, journal = {Journal of Chemical Physics}, volume = {143}, number = {8}, year = {2015}, month = {AUG}, pages = {084119}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

The effective electric field experienced by the unpaired electron in the ground state of PbF, which is a potential candidate in the search of electron electric dipole moment due to some special characteristics, is calculated using Z-vector method in the coupled cluster single-and double-excitation approximation with four component Dirac spinor. This is an important quantity to set the upper bound limit of the electron electric dipole moment. Further, we have calculated molecular dipole moment and parallel magnetic hyperfine structure constant (A(parallel to)) of Pb-207 in PbF to test the accuracy of the wavefunction obtained in the Z-vector method. The outcome of our calculations clearly suggests that the core electrons have significant contribution to the {\textquoteleft}{\textquoteleft}atom in compound{\textquoteright}{\textquoteright} properties. (C) 2015 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4929591}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article { ISI:000349917900007, title = {Can we shift and/or broaden the catalysis regime towards ambient temperature?}, journal = {ChemCatChem}, volume = {7}, number = {4}, year = {2015}, month = {FEB}, pages = {588-594}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

An attempt was made to shift the temperature regime of oxidation catalysis towards ambient temperatures by employing surface modification (SM) as a handle. Systematic SM of Pd(111) was performed by O-atom diffusion into the subsurfaces. Virgin and modified Pd(111) catalysts were evaluated for CO oxidation. Typical CO poisoning observed on virgin surfaces was partially lifted, and ambient CO oxidation was observed on the modified surfaces. CO oxidation was followed by the molecular beam method and near-ambient pressure (NAP) photoelectron spectroscopy under different pressure regimes. UV valence band spectral analysis of the SM and the CO+O-2 reaction on modified Pd(111) surfaces under NAP conditions demonstrated changes in the electronic structures of the surfaces with a change in surface potential by 0.35eV and directly probed CO2 formation under the reaction conditions. Supported metal catalysts may be subjected to SM and evaluated for a shift in the catalysis regime for many different reactions.

}, keywords = {heterogeneous catalysis, Oxidation, photoelectron spectroscopy, surface chemistry, surface modification}, issn = {1867-3880}, doi = {10.1002/cctc.201402979}, author = {Gopinath, Chinnakonda S. and Roy, Kanak and Nagarajan, Sankaranarayanan} } @article { ISI:000356755500019, title = {Catalytic upgrading of citric acid to environmental friendly tri-butyl citrate plasticizer over ultra stable phosphonated Y zeolite}, journal = {Chemical Engineering Research \& Design}, volume = {98}, year = {2015}, month = {JUN}, pages = {212-219}, publisher = {INST CHEMICAL ENGINEERS}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

The catalytic synthesis of non-toxic/eco-friendly tributyl citrate (TBC) plasticizer by esterification of renewable citric acid (CA) with butanol would be completely sustainable route. In this context, catalytic performance of parent ultra stable Y (USY) and phosphonated USY catalysts were investigated for TBC synthesis. Parent USY and phosphonated USY catalysts were characterized by powder X-ray diffraction (XRD), N-2 adsorption-desorption, NH3 temperature programmed desorption (TPD), pyridine-Fourier Transform Infrared Spectroscopy (FTIR), FTIR, SEM, ICP. The influence of various process parameters such as phosphorous (P) loading (0 to 4 wt/\%), catalyst loading (5-25\%), molar ratio of CA to n-butanol (1:4 to 1:12), reaction temperature (383-423 K) and reaction time (1-5 h) have been investigated over USY catalyst with aim to maximize CA conversion and TBC yield. Amongst the studied catalysts, the 2\% (w/w) P/USY was found to be highly potential catalyst with complete CA conversion (100\%) and 93\% TBC yield. The present method of using 2\% (w/w) P/USY catalyst for the synthesis of TBC would be environmentally benign in the context of bio-renewable synthetic route, high catalytic activity, non-toxic product, long term stability and reusability of catalyst (five catalytic cycles). (c) 2015 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved,

}, keywords = {Butanol, Citric acid, heterogeneous catalysis, Plasticizer, Tributyl citrate}, issn = {0263-8762}, doi = {10.1016/j.cherd.2015.04.037}, author = {Nandiwale, Kakasaheb Y. and Gogoi, Pranjal and Bokade, Vijay V.} } @article { ISI:000360705500008, title = {Chemical and biological metal nanoparticles as antimycobacterial agents: a comparative study}, journal = {International Journal of Antimicrobial Agents}, volume = {46}, number = {2}, year = {2015}, month = {AUG}, pages = {183-188}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Resistance among mycobacteria leading to multidrug-resistant and extensively drug-resistant tuberculosis is a major threat. However, nanotechnology has provided new insights in drug delivery and medicine development. This is the first comparative report to determine the activity of chemically and biologically synthesised silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) against mycobacteria. Screening data revealed the high mycobactericidal efficiency of AgNPs, with minimum inhibitory concentrations (MICs) of \<3 mu g/mL, whereas no such activity was exhibited by AuNPs at concentrations up to 100 mu g/mL. Moreover, in vitro and ex vivo THP-1 infection model assays showed greater efficacy of chemical AgNPs compared with biogenic AgNPs to inhibit active and dormant stage mycobacterial growth. Up to 40\% cytotoxicity against human cell lines was observed at a AgNP concentration of 10 x MIC (30 mu g/mL) after 48 h. AgNPs were shown to have more specificity towards mycobacteria than towards other Gram-negative and Gram-positive pathogenic bacteria. The selectivity index was found to be in the range of 11-23, indicating the potential of these nanoparticles for use in developing new therapeutics for tuberculosis. (C) 2015 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

}, keywords = {Antibiotic resistance, Antimycobacterial agent, Cytotoxicity, Mycobacteria, Nanoparticles, tuberculosis}, issn = {0924-8579}, doi = {10.1016/j.ijantimicag.2015.03.014}, author = {Singh, Richa and Nawale, Laxman U. and Arkile, Manisha A. and Shedbalkar, Utkarsha U. and Wadhwani, Sweety A. and Sarkar, Dhiman and Chopade, Balu Ananda} } @article { ISI:000360934800005, title = {Chemoinformatics approach for building molecular networks from marine organisms}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {18}, number = {7}, year = {2015}, month = {JAN}, pages = {673-684}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Natural products obtained from marine sources are considered to be a rich and diverse source of potential drugs. In the present work we demonstrate the use of chemoinformatics approach for the design of new molecules inspired by molecules from marine organisms. Accordingly we have assimilated information from two major scientific domains namely chemoinformatics and biodiversity informatics to develop an interactive marine database named MIMMO (Medicinally Important Molecules from Marine Organisms). The database can be queried for species, molecules, scaffolds, drugs, diseases and associated cumulative biological activity spectrum along with links to the literature resources. Molecular informatics analysis of the molecules obtained from MIMMO was performed to study their chemical space. The distinct skeletal features of the biologically active compounds isolated from marine species were identified. Scaffold molecules and species networks were created to identify common scaffolds from marine source and drug space. An analysis of the entire molecular data revealed a unique list of around 2000 molecules from which ten most frequently occurring distinct scaffolds were obtained.

}, keywords = {Chemoinformatics, Drug design, marine, virtual library}, issn = {1386-2073}, doi = {10.2174/1386207318666150703112950}, author = {Karthikeyan, Muthukumarasamy and Nimje, Deepika and Pahujani, Rakhi and Tyagi, Kushal and Bapat, Sanket and Vyas, Renu and Padmakumar, Krishna Pillai} } @article { ISI:000358250800001, title = {Chromerid genomes reveal the evolutionary path from photosynthetic algae to obligate intracellular parasites}, journal = {Elife}, volume = {4}, year = {2015}, month = {JUL}, pages = {Article Number: e06974}, publisher = {ELIFE SCIENCES PUBLICATIONS LTD}, address = {SHERATON HOUSE, CASTLE PARK, CAMBRIDGE, CB3 0AX, ENGLAND}, abstract = {

The eukaryotic phylum Apicomplexa encompasses thousands of obligate intracellular parasites of humans and animals with immense socio-economic and health impacts. We sequenced nuclear genomes of Chromera velia and Vitrella brassicaformis, free-living non-parasitic photosynthetic algae closely related to apicomplexans. Proteins from key metabolic pathways and from the endomembrane trafficking systems associated with a free-living lifestyle have been progressively and non-randomly lost during adaptation to parasitism. The free-living ancestor contained a broad repertoire of genes many of which were repurposed for parasitic processes, such as extracellular proteins, components of a motility apparatus, and DNA-and RNA-binding protein families. Based on transcriptome analyses across 36 environmental conditions, Chromera orthologs of apicomplexan invasion-related motility genes were co-regulated with genes encoding the flagellar apparatus, supporting the functional contribution of flagella to the evolution of invasion machinery. This study provides insights into how obligate parasites with diverse life strategies arose from a once free-living phototrophic marine alga.

}, issn = {2050-084X}, doi = {10.7554/eLife.06974}, author = {Woo, Yong H. and Ansari, Hifzur and Otto, Thomas D. and Klinger, Christen M. and Kolisko, Martin and Michalek, Jan and Saxena, Alka and Shanmugam, Dhanasekaran and Tayyrov, Annageldi and Veluchamy, Alaguraj and Ali, Shahjahan and Bernal, Axel and del Campo, Javier and Cihlar, Jaromir and Flegontov, Pavel and Gornik, Sebastian G. and Hajduskova, Eva and Horak, Ales and Janouskovec, Jan and Katris, Nicholas J. and Mast, Fred D. and Miranda-Saavedra, Diego and Mourier, Tobias and Naeem, Raeece and Nair, Mridul and Panigrahi, Aswini K. and Rawlings, Neil D. and Padron-Regalado, Eriko and Ramaprasad, Abhinay and Samad, Nadira and Tomcala, Ales and Wilkes, Jon and Neafsey, Daniel E. and Doerig, Christian and Bowler, Chris and Keeling, Patrick J. and Roos, David S. and Dacks, Joel B. and Templeton, Thomas J. and Waller, Ross F. and Lukes, Julius and Obornik, Miroslav and Pain, Arnab} } @article { ISI:000365529900006, title = {Cyclic cationic peptides containing sugar amino acids selectively distinguishes and inhibits maturation of pre-mirnas of the same family}, journal = {Nucleic Acid Therapeutics}, volume = {25}, number = {6}, year = {2015}, month = {DEC}, pages = {323-329}, publisher = {MARY ANN LIEBERT, INC}, address = {140 HUGUENOT STREET, 3RD FL, NEW ROCHELLE, NY 10801 USA}, abstract = {

The discovery of microRNAs (miRNAs) has added a new dimension to the gene regulatory networks, making aberrantly expressed miRNAs as therapeutically important targets. Small molecules that can selectively target and modulate miRNA levels can thus serve as lead structures. Cationic cyclic peptides containing sugar amino acids represent a new class of small molecules that can target miRNA selectively. Upon treatment of these small molecules in breast cancer cell line, we profiled 96 therapeutically important miRNAs associated with cancer and observed that these peptides can selectively target paralogous miRNAs of the same seed family. This selective inhibition is of prime significance in cases when miRNAs of the same family have tissue-specific expression and perform different functions. During these conditions, targeting an entire miRNA family could lead to undesired adverse effects. The selective targeting is attributable to the difference in the three-dimensional structures of precursor miRNAs. Hence, the core structure of these peptides can be used as a scaffold for designing more potent inhibitors of miRNA maturation and hence function.

}, issn = {2159-3337}, doi = {10.1089/nat.2015.0554}, author = {Nahar, Smita and Bose, Debojit and Pal, Sudip and Chakraborty, Tushar Kanti and Maiti, Souvik} } @article { ISI:000361004700026, title = {Design and synthesis of 11 alpha-substituted bile acid derivatives as potential anti-tuberculosis agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {25}, number = {19}, year = {2015}, month = {OCT}, pages = {4185-4190}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We have synthesized a series of novel 11 alpha-triazoyl bile acid derivatives. In addition, we also have synthesized N-alkyl and N-acyl derivatives of C-11 amino bile acid esters. All the compounds were evaluated for the inhibitory activity against Mycobacterium tuberculosis H37Ra (MTB) at 30 mu g/mL level. Four lead compounds (2b, 3, 7 and 8) were further confirmed from their dose dependent effect against MTB. These compounds were found to be active against Dormant and active stage MTB under both in vitro as well as within THP1 host macrophages. The most promising compound 2b showed strong antitubercular activities against MTB under in vitro and ex vivo (IC90 value of similar to 3 mu g/mL) conditions and almost insignificant cytotoxicity up to 100 mu g/mL against THP-1, A549 and PANC-1 human cancer cell lines. Inactivity of all these compounds against Gram positive and Gram negative bacteria indicates their specificity. Molecular docking studies of these compounds into the active site of DprE1 enzyme revealed a similar binding mode to native ligands in the crystal structure thereby helping to establish a structural basis of inhibition of MTB. The synthesized compounds were analyzed for ADME properties and showed potential to develop good oral drug candidates. Our results clearly indicate the identification of some novel, selective and specific inhibitors against MTB that can be explored further for potential antitubercular drug. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Antituberculosis, Bile acids, Cycloaddition, Docking study, In silico ADME}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2015.08.006}, author = {Pore, Vandana S. and Divse, Jaisingh M. and Charolkar, Chaitanya R. and Nawale, Laxman U. and Khedkar, Vijay M. and Sarkar, Dhiman} } @article { ISI:000360415500033, title = {Diffusion of small solute particles in viscous liquids: cage diffusion, a result of decoupling of solute-solvent dynamics, leads to amplification of solute diffusion}, journal = {Journal of Physical Chemistry B}, volume = {119}, number = {34}, year = {2015}, month = {AUG}, pages = {11169-11175}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We study the diffusion of small solute particles through solvent by keeping the solute solvent interaction repulsive and varying the solvent properties. The study involves computer simulations, development of a new model to describe diffusion of small solutes in a solvent, and also mode coupling theory (MCT) calculations. In a viscous solvent, a small solute diffuses via coupling to the solvent hydrodynamic modes and also through the transient cages formed by the solvent. The model developed can estimate the independent contributions from these two different channels of diffusion. Although the solute diffusion in all the systems shows an amplification, the degree of it increases with solvent viscosity. The model correctly predicts that when the solvent viscosity is high, the solute primarily diffuses by exploiting the solvent cages. In such a scenario the MCT diffusion performed for a static solvent provides a correct estimation of the cage diffusion.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b03034}, author = {Acharya, Sayantan and Nandi, Manoj K. and Mandal, Arkajit and Sarkar, Sucharita and Bhattacharyya, Sarika Maitra} } @conference {42954, title = {Discovery of new chemical entities against diseases of national importance :an HTS approach}, booktitle = {National Science Day, At CSIR-NCL}, year = {2015}, month = {FEB}, address = {Combi Chem-Bio Resource Center, OCD, National Chemical Laboratory, Pune - 411 008}, author = {Nawale, Laxman and Sarkar, Dhiman} } @article { ISI:000355703700056, title = {Effect of alkali and alkaline earth metal ions on benzyl alcohol oxidation activity of titanate nanotube-supported Au catalysts}, journal = {RSC Advances}, volume = {5}, number = {59}, year = {2015}, month = {MAY}, pages = {47740-47748}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Sodium titanate nanotubes (NaTNTs) were prepared by alkali treatment of anatase titania. They were then ion-exchanged with alkali and alkaline earth metal ions to get ATNTs (A = Li+, K+, Cs+, Mg2+, Ca2+, Sr2+ and Ba2+). Gold (1-5 wt\%) was supported on these nanotubes by a deposition-precipitation method and investigated as a catalyst for the selective oxidation of benzyl alcohol with air/molecular oxygen (1 atm) under solvent-and alkali-free conditions. Detailed characterization by X-ray powder diffraction, high resolution transmission electron microscopy, N-2-physisorption, diffuse reflectance UV-visible spectroscopy, X-ray photoelectron spectroscopy and CO2-temperature-programmed desorption techniques revealed that the basicity of the catalyst influences the uptake, mean particle size, electronic properties and oxidation activity of the supported gold. Benzaldehyde formed with a selectivity of about 99\%. The catalytic activity (turnover frequency) was found to have a direct relationship with the basicity and an inverse relationship with the Au particle size. Among the catalysts investigated, Au/BaTNTs, having higher basicity, smaller Au particles and higher metal dispersion, showed enhanced catalytic activity than the other Au/ATNT catalysts. Pd addition to Au leading to Au-Pd/BaTNTs increased the activity (TOF) but lowered the selectivity for benzaldehyde (80 wt\%). Titanate nanotubes donate electron density to Au particles, yielding electron rich Au ions, which are responsible for activating molecular oxygen and oxidizing benzyl alcohol. Au/BaTNTs, having higher basicity and lower size Au nanoparticles than the other Au/ATNT, activates molecular oxygen more easily and thereby enhances the catalytic activity.

}, issn = {2046-2069}, doi = {10.1039/c5ra06496a}, author = {Nepak, Devadutta and Srinivas, Darbha} } @conference {42950, title = {Efficacy study of potential anti-tubercular molecules: in-vitro and ex-vivo}, booktitle = {National Science Day}, year = {2015}, month = {FEB}, address = {National Chemical Laboratory, Pune 411008}, abstract = {

Tuberculosis: Infectious disease caused by the bacillus Mycobacterium tuberculosis Second leading infectious killer after HIV/AIDS In 2013, 8.6 million TB cases were reported out of which 1.3 million died Emergence of Multi-drug resistant TB (MDR-TB) and extremely drug resistant TB (XDR) for which no drugs are available. Latency being a cause of recurring TB infection is a major problem in eradication of TB

}, author = {Nawale, Laxman and Sarkar, Dhiman} } @article { ISI:000370057200011, title = {Enhanced electron field emission from NiCo2O4 nanosheet arrays}, journal = {Materials Research Express}, volume = {2}, number = {9}, year = {2015}, month = {SEP}, pages = {095011}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Electron emission properties of electrodeposited spinel NiCo2O4 nanosheet arrays grown on Ni foam have been studied. The work function of NiCo2O4 was calculated by density functional theory using the plane-wave basis set and used to estimate the field enhancement factor. The NiCo2O4 nanosheet arrays exhibited a low turn-on field of 1.86 V mu m(-1) at 1 mu A cm(-2) and current density of 686 mu A cm(-2) at 3.2 V mu m(-1), with field enhancement factor beta = 1460 and good field emission current stability. The field emission properties of the NiCo2O4 nanosheet arrays showed enhanced performance compared to chemically prepared NiCo2O4 nanosheets. Hence, the nanosheet arrays have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

}, keywords = {Density functional theory, field emission, nanosheets, NiCo2O4, spinel}, issn = {2053-1591}, doi = {10.1088/2053-1591/2/9/095011}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Gelamo, Rogerio V. and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article { ISI:000355231200019, title = {Environmentally benign catalytic process for esterification of renewable levulinic acid to various alkyl levulinates biodiesel}, journal = {Environmental Progress \& Sustainable Energy}, volume = {34}, number = {3}, year = {2015}, month = {SEP}, pages = {795-801}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

This study explores, the use of modified zeolite (Micro/Meso-HZ-5) obtained by desilication post-treatment as heterogeneous catalyst for esterification of biomass derived renewable levulinic acid (LA) with different alkyl alcohols such as methanol, ethanol, n-butanol, and n-octanol aiming to produce corresponding alkyl levulinate. This method of production of alkyl levulinates would be sustainable process, as it can be used as novel miscible diesel biofuels preventing global warming by decreasing atmospheric CO2. The LA conversion obtained over Micro/Meso-HZ-5 was higher than H-ZSM-5, which is due to the combined effect of increase in Bronsted acid sites, total acidity, and other properties such as BET surface area and the generation of mesoporosity. The maximum LA conversion of 91, 95, 96, and 98\% with 100\% selectivity toward alkyl levulinate was obtained, when LA was being esterified over Micro/Meso-HZ-5 with methanol, ethanol, n-butanol, and n-octanol, respectively, at optimal process parameters. Micro/Meso-HZ-5 catalyst was found to be reusable for six cycles. Furthermore, pseudo homogeneous (P-H) kinetic model of the esterification of LA with the studied four alcohols were established with R-2\>0.99, using the experimental data. A P-H kinetic model implies that, the esterification reaction follows second order reversible kinetics. (c) 2014 American Institute of Chemical Engineers Environ Prog, 34: 795-801, 2015

}, keywords = {biofuels, Esterification, kinetic model, levulinic acid, meso-HZ-5, micro}, issn = {1944-7442}, doi = {10.1002/ep.12042}, author = {Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000348924600005, title = {Esterification of renewable levulinic acid to n-butyl levulinate over modified H-ZSM-5}, journal = {Chemical Engineering \& Technology}, volume = {38}, number = {2}, year = {2015}, month = {FEB}, pages = {246-252}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The synthesis of n-butyl levulinate, one of the most important biodiesel additives, by catalytic esterification of biomass-derived levulinic acid (LA) with n-butanol over modified H-ZSM-5 (micro/meso-HZ-5) in a closed-batch system is reported for the first time. The optimization of the reaction conditions such as the reactant molar ratio, the catalyst loading, the reaction time and the temperature was performed in view to maximize the yield of n-butyl levulinate. Micro/meso-HZ-5 was found to be the most efficient catalyst, with 98\% yield of n-butyl levulinate and a reusability for six cycles, which is higher than reported in the literature. A possible catalytic mechanism for the esterification reaction is also proposed. A second-order pseudo-homogeneous model with R-2 \> 0.97 confirmed that the esterification reaction is performed in the kinetic regime due to the high activation energy of 23.84 kJ mol(-1).

}, keywords = {Esterification, kinetic model, levulinic acid, Micro/meso-HZ-5, n-Butyl levulinate}, issn = {0930-7516}, doi = {10.1002/ceat.201400326}, author = {Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000362834600003, title = {Experimental signature of microheterogeneity in ionic liquid-H2O systems and their perturbation by adding Li+ salts: a pulsed gradient spin-echo NMR approach}, journal = {Chemphyschem}, volume = {16}, number = {14}, year = {2015}, month = {OCT}, pages = {2936-2941}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Distinct microheterogeneity has been observed in the [OMIM]Br-H2O system, which is interestingly perturbed by the addition of Li+ salts, indicating unusual diffusivity of [OMIM]Br and H2O molecules. However, the diffusional dynamics of water clusters show contrasting salting behavior at higher concentrations of Li+ salts, following the classical salting phenomenon in lower amounts. In contrast, the existing microheterogeneity in the [BMIM]Br-H2O system is weak enough to show any perturbation caused by the Li+ salts on the NMR time scale.

}, keywords = {ionic liquids, lithium, microheterogeneity, salt effect, viscosity}, issn = {1439-4235}, doi = {10.1002/cphc.201500503}, author = {Nanda, Raju and Rajamohanan, P. R. and Kumar, Anil} } @article { ISI:000361697400005, title = {Fractional photo-current dependence of graphene quantum dots prepared from carbon nanotubes}, journal = {Physical Chemistry Chemical Physics}, volume = {17}, number = {38}, year = {2015}, month = {AUG}, pages = {24566-24569}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report on the photo-conductivity studies of chemically synthesized graphene quantum dots (GQDs) of average size 12 nm obtained by the oxidative acid treatment of MWCNTs. The dependence of photocurrent I-ph (I-ph = I-ill - I-dark) on the laser intensity P under a wide range of laser intensities (5 mW \<= P \<= 60 mW) shows a fractional power dependence of I-ph on light intensity. The temperature dependence (300 K \< T \< 50 K) of I-ph observed in thin films of these GQDs indicates that in the higher temperature region (T \> similar to 100 K), as the temperature increases, the number of thermally generated carriers increase resulting in increased I-ph. At sufficiently low temperatures (T \<= 100 K), a constant I-ph is observed, indicating a constant photocarrier density. Such a behavior is typically observed in many photoactive disordered semiconductors, which are often used in a variety of applications. We believe that the investigations presented here will enhance our understanding of the photocurrent generation phenomenon in chemically obtained GQDs.

}, issn = {1463-9076}, doi = {10.1039/c5cp03306c}, author = {Kundu, Sumana and Ghosh, Sujoy and Fralaide, Michael and Narayanan, T. N. and Pillai, Vijayamohanan K. and Talapatra, Saikat} } @conference {42974, title = {High throughput screening of inhibitors for tuberculosis at NCL : a novel drug discovery initiative from CSIR}, booktitle = {73rd CSIR Foundation Day, at CSIR-National Chemical Laboratory, Pune}, year = {2015}, month = {SEP}, publisher = {CSIR-National Chemical Laboratory, Pune}, organization = {CSIR-National Chemical Laboratory, Pune}, address = {CSIR-National Chemical Laboratory, Pune}, abstract = {

Discover and develop novel drugs that are effective at curing latent, drug sensitive and drug resistant TB Study the biology of tuberculosis bacilli in great detail to identify new metabolic pathways that may be vulnerable to drugs Test thousands of potential drugs in our screening facility to find new compounds or new compound classes that kill TB bacteria Increase throughput up to 20,000 compounds at a time Develop novel screens using conditions that mimic those the TB bacteria encounters in the human body Utilize medical chemistry to optimize the structures of compounds so that they kill TB bacteria in a more potent fashion and are non-toxic Meet the challenges from industry

}, author = {Manek, Hardik and Nawale, Laxman and Jadhav, Nandadeep J. and Sarkar, Dhiman} } @article { ISI:000353930700023, title = {Hybrid perovskite films by a new variant of pulsed excimer laser deposition: a room-temperature dry process}, journal = {Journal of Physical Chemistry C}, volume = {119}, number = {17}, year = {2015}, month = {APR}, pages = {9177-9185}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A new variant of the classic pulsed laser deposition (PLD) process is introduced as a room-temperature dry process for the growth and stoichiometry control of hybrid perovskite films through the use of nonstoichiometric single target ablation and off-axis growth. Mixed halide hybrid perovskite films nominally represented by CH(3)NH(3)PbI(3-x)A(x) (A = Cl or F) are also grown and are shown to reveal interesting trends in the optical properties and photoresponse. Growth of good quality lead-free CH3NH3SnI3 films is also demonstrated, and the corresponding optical properties are presented. Finally, perovskite solar cells fabricated at room temperature (which makes the process adaptable to flexible substrates) are shown to yield a conversion efficiency of about 7.7\%.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b02561}, author = {Bansode, Umesh P. and Naphade, Rounak and Game, Onkar S. and Agarkar, Shruti A. and Ogale, Satishchandra} } @article {43026, title = {Identification and computational analysis of gene regulatory elements}, journal = {Cold Spring Harbor Protocols}, volume = {1}, year = {2015}, month = {JAN}, abstract = {

Over the last two decades, advances in experimental and computational technologies have greatly facilitated genomic research. Next-generation sequencing technologies have made de novo sequencing of large genomes affordable, and powerful computational approaches have enabled accurate annotations of genomic DNA sequences. Charting functional regions in genomes must account for not only the coding sequences, but also noncoding RNAs, repetitive elements, chromatin states, epigenetic modifications, and gene regulatory elements. A mix of comparative genomics, high-throughput biological experiments, and machine learning approaches has played a major role in this truly global effort. Here we describe some of these approaches and provide an account of our current understanding of the complex landscape of the human genome. We also present overviews of different publicly available, large-scale experimental data sets and computational tools, which we hope will prove beneficial for researchers working with large and complex genomes. {\textcopyright} 2015 Cold Spring Harbor Laboratory Press.

}, doi = {10.1101/pdb.top083642}, author = {Taher, Leila and Narlikar, Leelavati and Ovcharenko, Ivan} } @article { ISI:000352195500001, title = {Implementation of the Z-vector method in the relativistic-coupled-cluster framework to calculate first-order energy derivatives: Application to the SrF molecule}, journal = {Physical Review A}, volume = {91}, number = {3}, year = {2015}, month = {MAR}, pages = {030503}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

The molecular dipole moment and magnetic hyperfine-structure constant demand an accurate wave function far from the nucleus and in the near nuclear region, respectively. We, therefore, employ the so-called Z-vector method in the domain of relativistic-coupled-cluster theory to calculate the first-order property of molecular systems in their open-shell ground-state configuration. The implemented method is applied to calculate the molecular dipole moment and parallel component of the magnetic hyperfine-structure constant of the SrF molecule. The results of our calculation are compared with the experimental and other available theoretically calculated values. We are successful in achieving good accordance with the experimental results. The result of our calculation of the molecular dipole moment is in the accuracy of similar to 0.5\%, which is clearly an improvement over the previous calculation based on the expectation value method in the four-component coupled-cluster framework [V. S. Prasannaa et al., Phys. Rev. A 90, 052507 (2014)]. Thus, it can be inferred that the Z-vector method can provide an accurate wave function in both the near and far nuclear region, which is evident from our calculated results.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.91.030503}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article { ISI:000354472900015, title = {Influence of cultivar, ripeness, blanching, drying, irradiation, and pectin recovery on alk(en)ylresorcinols in mango peels}, journal = {European Food Research and Technology}, volume = {240}, number = {6}, year = {2015}, month = {JUN}, pages = {1235-1245}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The influence of different technological treatments on alk(en)ylresorcinol (AR) contents and pattern in mango peels was evaluated using peels from six different mango cultivars. AR concentrations were shown to highly depend on the cultivar. While high AR concentrations were observed in the analyzed monoembryonic cultivars, AR contents in the polyembryonic cultivar Nam Dokmai were significantly lower. Furthermore, for monoembryonic cultivars, AR levels in the peels of ripe fruits were found to be higher than in unripe ones, while AR levels in cv. Nam Dokmai were independent of the ripeness degree. Convective oven drying resulted in a significant reduction in AR contents when compared to lyophilization. Blanching prior to drying diminished AR yields, thus being unsuitable for satisfactory AR recovery. Gamma irradiation did not significantly affect the AR contents. Since depectinization of mango peels significantly concentrated AR amounts in the depectinized pomace, the consecutive extraction of pectin and ARs allows the dual valorization of mango peels. Considering the treatments investigated, the retention of ARs carrying saturated and unsaturated side chains did not differ under acidic conditions, heating, and irradiation, respectively. Consequently, the 1,3-dihydroxybenzene structure was concluded to be the most labile moiety of the AR molecule.

}, keywords = {Alkylresorcinol, By-products, Monoembryonic, Polyembryonic, Pomace, Ultrasound}, issn = {1438-2377}, doi = {10.1007/s00217-015-2426-x}, author = {Geerkens, Christian Hubert and Miller-Rostek, Petra and Matejka, Anna Elisabeth and Nene, Sanjay and Kammerer, Dietmar Rolf and Carle, Reinhold and Schweiggert, Ralf Martin} } @article { ISI:000353901700002, title = {Insect trehalase: physiological significance and potential applications}, journal = {Glycobiology}, volume = {25}, number = {4}, year = {2015}, month = {APR}, pages = {357-367}, publisher = {OXFORD UNIV PRESS INC}, address = {JOURNALS DEPT, 2001 EVANS RD, CARY, NC 27513 USA}, abstract = {

Trehalose, a non-reducing disaccharide, is widespread throughout the biological world. It is the major blood sugar in insects playing a crucial role as an instant source of energy and in dealing with abiotic stresses. The hydrolysis of trehalose is under the enzymatic control of trehalase. The enzyme trehalase is gaining interest in insect physiology as it regulates energy metabolism and glucose generation via trehalose catabolism. The two forms of insect trehalase namely, Tre-1 and Tre-2, are important in energy supply, growth, metamorphosis, stress recovery, chitin synthesis and insect flight. Insect trehalase has not been reviewed in depth and the information available is quite scattered. The present mini review discusses our recent understanding of the regulation, mechanism and biochemical characterization of insect trehalase with respect to its physiological role in vital life functions. We also highlight the molecular and biochemical properties of insect trehalase that makes it amenable to competitive inhibition by most glycosidase inhibitors. Due to its crucial role in carbon metabolism in insects, application of inhibitors against trehalose can form a promising area towards formulating strategies for insect pest control.

}, keywords = {carbohydrate metabolism, glycosidase inhibitor, glycoside hydrolase, trehalase, trehalose}, issn = {0959-6658}, doi = {10.1093/glycob/cwu125}, author = {Shukla, Ekta and Thorat, Leena J. and Nath, Bimalendu B. and Gaikwad, Sushama M.} } @article { ISI:000353289100023, title = {Interesting viscosity changes in the aqueous urea-ionic liquid system: effect of alkyl chain length attached to the cationic ring of an ionic liquid}, journal = {Journal of Solution Chemistry}, volume = {44}, number = {3-4, SI}, year = {2015}, month = {APR}, pages = {742-753}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

In the present article, we demonstrate the effect of urea on the structure of the ionic liquids in their aqueous solutions through viscometric methods. We unravel the structure altering effect of urea in its aqueous solutions of ionic liquids possessing higher alkyl chains. The finding is an attempt to discern the anomalous behavior of urea as shown in the past with the help of many techniques. Interestingly, in the aqueous solutions of the imidazolium based ionic liquids having substitution of -C4H9 and -C6H13 groups on the imidazolium ring, urea exhibits kosmotropic behavior. Further increase in the substituted alkyl group such as -C8H17 alters the urea behavior to be chaotropic.

}, keywords = {Alkyl chain length, ionic liquids, Structure-breaker, Structure-maker, Urea, viscosity}, issn = {0095-9782}, doi = {10.1007/s10953-015-0320-6}, author = {Nanda, Raju and Rai, Gitanjali and Kumar, Anil} } @article { ISI:000360313500013, title = {Interlinked population balance and cybernetic models for the simultaneous saccharification and fermentation of natural polymers}, journal = {Biotechnology and Bioengineering}, volume = {112}, number = {10}, year = {2015}, month = {OCT}, pages = {2084-2105}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Simultaneous Saccharification and Fermentation (SSF) is a process where microbes have to first excrete extracellular enzymes to break polymeric substrates such as starch or cellulose into edible nutrients, followed by in situ conversion of those nutrients into more valuable metabolites via fermentation. As such, SSF is very attractive as a one-pot synthesis method of biological products. However, due to the co-existence of multiple biochemical steps, modeling SSF faces two major challenges. The first is to capture the successive chain-end and/or random scission of the polymeric substrates over time, which determines the rate of generation of various fermentable substrates. The second is to incorporate the response of microbes, including their preferential substrate utilization, to such a complex broth. Each of the above-mentioned challenges has manifested itself in many related areas, and has been competently but separately attacked with two diametrically different tools, i.e., the Population Balance Modeling (PBM) and the Cybernetic Modeling (CM), respectively. To date, they have yet to be applied in unison on SSF resulting in a general inadequacy or haphazard approaches to examine the dynamics and interactions of depolymerization and fermentation. To overcome this unsatisfactory state of affairs, here, the general linkage between PBM and CM is established to model SSF. A notable feature is the flexible linkage, which allows the individual PBM and CM models to be independently modified to the desired levels of detail. A more general treatment of the secretion of extracellular enzyme is also proposed in the CM model. Through a case study on the growth of a recombinant Saccharomyces cerevisiae capable of excreting a chain-end scission enzyme (glucoamylase) on starch, the interlinked model calibrated using data from the literature (Nakamura et al., Biotechnol. Bioeng. 53:21-25, 1997), captured features not attainable by existing approaches. In particular, the effect of various enzymatic actions on the temporal evolution of the polymer distribution and how the microbes respond to the diverse polymeric environment can be studied through this framework. Biotechnol. Bioeng. 2015;112: 2084-2105. (c) 2015 Wiley Periodicals, Inc.

}, keywords = {cybernetic modeling, population balance modeling, simultaneous saccharification and fermentation}, issn = {0006-3592}, doi = {10.1002/bit.25616}, author = {Ho, Yong Kuen and Doshi, Pankaj and Yeoh, Hak Koon and Ngoh, Gek Cheng} } @article { ISI:000349069300003, title = {Ionic conductivity probed in main chain liquid crystalline azobenzene polyesters}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {53}, number = {5}, year = {2015}, month = {MAR}, pages = {629-641}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Three main chain thermotropic liquid crystalline (LC) azobenzene polymers were synthesized using the azobenzene twin molecule (P4P) having the structure Phenylazobenzene-tetraethyleneglycol-Phenylazobenzene as the AA monomer and diols like diethylene glycol, tetraethylene glycol (TEG), and hexaethylene glycol as the BB comonomer. Terminal C(O)OMe units on P4P facilitated transesterification with diols to form polyesters. All polymers exhibited stable smectic mesophases. One of the polymers, Poly(P4PTEG) was chosen to prepare composite polymer electrolytes with LiCF3SO3 and ionic conductivity was measured by ac impedance spectroscopy. The polymer/0.3 Li salt complex exhibited a maximum ionic conductivity in the range of 10(-5) S cm(-1) at room temperature (25 degrees C), which increased to 10(-4) S cm(-1) above 65 degrees C. The temperature dependence of ionic conductivity was compared with the phase transitions occurring in the sample and it was observed that the glass transition had a higher influence on the ionic conductivity compared to the ordered LC phase. Reversible ionic conductivity switching was observed upon irradiation of the polymer/0.3 Li salt complex with alternate UV and visible irradiation. (c) 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 629-641

}, keywords = {azo polymers, glass transition, liquid-crystalline polymers (LCP)}, issn = {0887-624X}, doi = {10.1002/pola.27484}, author = {Nardele, Chinmay G. and Dhavale, Vishal M. and Sreekumar, K. and Asha, S. K.} } @article { ISI:000368224600009, title = {Lithium-assisted proton conduction at 150 degrees C in a microporous triazine-phenol polymer}, journal = {Advanced Materials Interfaces}, volume = {2}, number = {16}, year = {2015}, month = {NOV}, pages = {1500301}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, keywords = {conduction, hydrophobic polar frameworks, lithiated polymers, proton conduction, triazine-phenol polymers}, issn = {2196-7350}, doi = {10.1002/admi.201500301}, author = {Nandi, Shyamapada and Dhavale, Vishal M. and Shalini, Sorout and Werner-Zwanziger, Ulrike and Singh, Harpreet and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article { ISI:000349848800001, title = {Mathematical modeling of combinatorial regulation suggests that apparent positive regulation of targets by miRNA could be an artifact resulting from competition for mRNA}, journal = {RNA-A Publication of the RNA Society}, volume = {21}, number = {3}, year = {2015}, month = {MAR}, pages = {307-319}, publisher = {COLD SPRING HARBOR LAB PRESS, PUBLICATIONS DEPT}, address = {1 BUNGTOWN RD, COLD SPRING HARBOR, NY 11724 USA}, abstract = {

MicroRNAs bind to and regulate the abundance and activity of target messenger RNA through sequestration, enhanced degradation, and suppression of translation. Although miRNA have a predominantly negative effect on the target protein concentration, several reports have demonstrated a positive effect of miRNA, i.e., increase in target protein concentration on miRNA overexpression and decrease in target concentration on miRNA repression. miRNA-target pair-specific effects such as protection of mRNA degradation owing to miRNA binding can explain some of these effects. However, considering such pairs in isolation might be an oversimplification of the RNA biology, as it is known that one miRNA interacts with several targets, and conversely target mRNA are subject to regulation by several miRNAs. We formulate a mathematical model of this combinatorial regulation of targets by multiple miRNA. Through mathematical analysis and numerical simulations of this model, we show that miRNA that individually have a negative effect on their targets may exhibit an apparently positive net effect when the concentration of one miRNA is experimentally perturbed by repression/overexpression in such a multi-miRNA multitarget situation. We show that this apparent unexpected effect is due to competition and will not be observed when miRNA interact noncompetitively with the target mRNA. This result suggests that some of the observed unusual positive effects of miRNA may be due to the combinatorial complexity of the system rather than due to any inherently unusual positive effect of the miRNA on its target.

}, keywords = {combinatorial binding, mathematical model, miRNA, post-transcriptional regulation}, issn = {1355-8382}, doi = {10.1261/rna.046862.114}, author = {Nyayanit, Dimpal and Gadgil, Chetan J.} } @article { ISI:000367118100023, title = {Mechanism of alcohol oxidation by Fe-V(O) at room temperature}, journal = {Inorganic Chemistry}, volume = {54}, number = {24}, year = {2015}, month = {DEC}, pages = {11792-11798}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{Selective oxidation of alcohol to its corresponding carbonyl compound is an important chemical process in biological as well as industrial reactions, The heme containing enzyme CytP450 has been known to selectively oxidize akohols to their corresponding carbonyl compounds. The mechanism of this reaction, which involves high-valent Fe-IV(O)-porphyrin(center dot+) intermediate with alcohol, has been well-studied extensively both with the native enzyme and with model complexes. In this paper, we report for the first time the mechanistic insight of, alcohol oxidation with Fe-V(O) complex of biuret TAML (bTAML), Which is isoelectronic with Fe-IV(O)-porphyrin(center dot+) intermediate form in CytP450. The oxidations displayed saturation kinetics, which allowed us to determine both the binding constants and first-order rate constants for the reaction. The K and k values observed for thel oxidation of benzyl alcohol by Fe-V(O) at room temperature (K = 300 M-1

}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.5b01937}, author = {Ghosh, Munmun and Nikhil, Y. L. K. and Dhar, Basab B. and Sen Gupta, Sayam} } @conference {42970, title = {Mechanistic understanding of rapid gelation of silk fibroin using a biosurfactant {\textendash} sophorolipid}, booktitle = {National Science Day, At CSIR-NCL}, year = {2015}, month = {FEB}, address = {National Chemical Laboratory, Pune India}, abstract = {

3D polymeric hydrogels find use in biomedical applications as scaffolds and drug delivery vehicle {\textbullet} Silk fibroin a structural protein is a promising candidate (excellent thermo-mechanicals, biocompatibility, biodegradability) {\textbullet} Sophorolipid (SL)-a biosurfactant is known to exhibit antimicrobial, anti cancerous and cell differentiating. {\textbullet} Use of SL as gelling agent can enhance the applicability of SF hydrogels {\textbullet} SF-SL scaffolds obtained by lyophilization of hydrogels can find application in tissue regeneration

}, author = {Dubey, Parul and Nawale, Laxman and Sarkar, Dhiman and Nisal, Anuya and Prabhune, Asmita} } @conference {45949, title = {Molecular sieves and ultrasound-assisted synthesis of novel 1,3,4-oxadiazole-2-thiones derivatives as potential antifungal agents}, booktitle = {19TH INTERNATIONAL ELECTRONIC CONFERENCE ON SYNTHETIC ORGANIC CHEMISTRY}, year = {2015}, publisher = {MDPI; Univ Sanitiago Compostila; SES; Flow Chemistry; REGAL S; Molecules}, organization = {MDPI; Univ Sanitiago Compostila; SES; Flow Chemistry; REGAL S; Molecules}, address = {ST. ALBAN-ANLAGE 66, BASEL, CH-4052, SWITZERLAND}, abstract = {

In the category of microorganism, fungi are considered as the special class of microbes responsible for opportunistic pathogenic infections in humans species. Due to the side effects of commercially available antifungal drugs and the emergence of new drug resistant fungal species in the past few years, has forced the researchers to search for novel and efficient antifungal drug molecules. The 1,3,4-oxadiazoles scaffold is associated with diverse biological activities. The multipurpose use of the Mannich bases in pharmaceutical chemistry promote us to prepare a new series of 5-(4-(benzyloxy)substituted phenyl)-3-((phenyl amino)methyl)-1,3,4oxadiazole-2(3H)-thione as antifungal agents. Herein, we report molecular sieves and ultrasound assisted synthesis of novel series of Mannich bases of the 5-substituted 1,3,4-oxadiazole-2-thiones by amino methylation with paraformaldehyde and substituted primary / secondary amines and their evaluation for antifungal activity. The structures of the newly synthesized compounds were determined by IR, NMR and Mass spectral study. The synthesized compounds exhibited interesting moderate to excellent antifungal activity against Candida albicans (NCIM 3557), Candida albicans(NCIM3471), Candida glabrata(NCIM3237), Cryptococcus neoformans (NCIM 3542), Cryptococcus neoformans(NCIM 3378), Aspergillus fumigates(NCIM 902), Aspergillus niger(NCIM 628) using Flucanazole as a standard reference drug. The synthesised compounds 6d, 6f,6g, 6h and 6j exhibited promising antifungal activity as antifungal agents.

}, keywords = {1, 3, 4-oxadiazoles, Antifungal activity, Mannich reaction, Molecular sieves, Ultrasound -assisted}, doi = {10.3390/ecsoc-19-b008}, author = {Nikalje, Anna Pratima G. and Nimbalkar, Ms Urja D. and Tupe, Santosh and Vazquez, Julio A. Seijas and Tato, Maria Pilar Vazquez}, editor = {Seijas, JA and Tato, MPV and Lin, SK} } @article { ISI:000363668200036, title = {Multifaceted core-shell nanoparticles: superparamagnetism and biocompatibility}, journal = {New Journal of Chemistry}, volume = {39}, number = {11}, year = {2015}, month = {AUG}, pages = {8513-8521}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

NicoreAgshell nanoparticles were synthesized by redox transmetallation reaction. Reduction potential match was encouraging to attempt the synthesis of the NicoreAushell system too. However, it could be achieved only after an effective surface modification on the Ni-core. Thorough characterization (UV-Vis spectroscopy, fluorescence spectroscopy, XRD, XPS, FTIR, TEM, and EDX) proved the necessity of surface modification and the success of synthesis of both types of core-shell structures. The chemical composition and topography were determined using STEM-HAADF analysis and EFTEM imaging. Fourier transform infrared (FTIR) spectroscopy confirmed the surface modification of Ni nanoparticles and the interactions involved between the ligands and metals (in the core and/or the shell) at various steps of the synthetic process. Even after the formation of the noble metal shell, the magnetic core was found to retain its superparamagnetic nature. In addition, the Au-shell protected the core from aerial oxidation and decreased toxicity as compared to pristine Ni nanoparticles as observed by MTT assay on normal cells (PBMCs).

}, issn = {1144-0546}, doi = {10.1039/c5nj01481f}, author = {Sardar, Debasmita and Neogi, S. K. and Bandyopadhyay, Sanjoy and Satpati, Biswarup and Ahir, Manisha and Adhikary, Arghya and Jain, Ruchi and Gopinath, Chinnakonda S. and Bala, Tanushree} } @article {42975, title = {Multifunctional silica nanoparticles for pancreatic cancer specific drug delivery and bioimaging}, journal = {Journal of Chemistry \& Applied Biochemistry}, volume = {2}, year = {2015}, month = {JUN}, abstract = {

Mesoporous silica nanoparticles (MSN) have attracted increasing interest as drug carriers due to their biocompatibility and robustness. In this analysis we explored the potential of MSN as nanotheranostic platform for pancreatic cancer specific drug delivery and bioimaging. Pancreatic cancer is the most fatal cancer and due to its high mortality and low prognosis it is imperative to develop new methods for early diagnosis and therapy of this cancer. Though traditionally organic dyes, quantum dots and fluorescent agents are used for bioimaging but here we have utilized graphene quantum dots (GQDs) for bioimaging due to their superior biocompatibility and fluorescence properties. MSN were loaded with gemcitabine; the most preferred drug for pancreatic cancer. MSN and GQDs were characterized by SEM, TEM, FT-IR etc and the efficacy of nanoformulation was determined by MTT assay.

}, author = {Nigam, Preeti and Sarkar, Dhiman} } @article { ISI:000365530700031, title = {Nanocrystalline Fe-Fe2O3 particle-deposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction}, journal = {Nanoscale}, volume = {7}, number = {47}, year = {2015}, month = {OCT}, pages = {20117-20125}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The size-controlled growth of nanocrystalline Fe-Fe2O3 particles (2-3 nm) and their concomitant dispersion on N-doped graphene (Fe-Fe2O3/NGr) could be attained when the mutually assisted redox reaction between NGr and Fe3+ ions could be controlled within the aqueous droplets of a water-in-oil emulsion. The synergistic interaction existing between Fe-Fe2O3 and NGr helped the system to narrow down the overpotential for the oxygen reduction reaction (ORR) by bringing a significant positive shift to the reduction onset potential, which is just 15 mV higher than its Pt-counterpart. In addition, the half-wave potential (E-1/2) of Fe-Fe2O3/NGr is found to be improved by a considerable amount of 135 mV in comparison to the system formed by dispersing Fe-Fe2O3 nanoparticles on reduced graphene oxide (Fe-Fe2O3/RGO), which indicates the presence of a higher number of active sites in Fe-Fe2O3/NGr. Despite this, the ORR kinetics of Fe-Fe2O3/NGr are found to be shifted significantly to the preferred 4-electron-transfer pathway compared to NGr and Fe-Fe2O3/RGO. Consequently, the H2O2\% was found to be reduced by 78.3\% for Fe-Fe2O3/NGr (13.0\%) in comparison to Fe-Fe2O3/RGO (51.2\%) and NGr (41.0\%) at -0.30 V (vs. Hg/HgO). This difference in the yield of H2O2 formed between the systems along with the improvements observed in terms of the oxygen reduction onset and E-1/2 in the case of Fe-Fe2O3/NGr reveals the activity modulation achieved for the latter is due to the coexistence of factors such as the presence of the mixed valancies of iron nanoparticles, small size and homogeneous distribution of Fe-Fe2O3 nanoparticles and the electronic modifications induced by the doped nitrogen in NGr. A controlled interplay of these factors looks like worked favorably in the case of Fe-Fe2O3/NGr. As a realistic system level validation, Fe-Fe2O3/NGr was employed as the cathode electrode of a single cell in a solid alkaline electrolyte membrane fuel cell (AEMFC). The system could display an open circuit voltage (OCV) of 0.73 V and maximum power and current densities of 54.40 mW cm(-2) and 200 mA cm(-2), respectively, which are comparable to the performance characteristics of a similar system derived by using 40 wt\% Pt/C as the cathode electrode.

}, issn = {2040-3364}, doi = {10.1039/c5nr04929f}, author = {Dhavale, Vishal M. and Singh, Santosh K. and Nadeema, Ayasha and Gaikwad, Sachin S. and Kurungot, Sreekumar} } @article { ISI:000363163200048, title = {Nanostructured 2D MoS2 honeycomb and hierarchical 3D CdMoS4 marigold nanoflowers for hydrogen production under solar light}, journal = {Journal of Materials Chemistry A}, volume = {3}, number = {42}, year = {2015}, month = {SEP}, pages = {21233-21243}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Unique two dimensional (2D) honeycomb layered MoS2 nanostructures and hierarchical 3D marigold nanoflowers of CdMoS4 were designed using a template free and facile solvothermal method. The MoS2 structure is depicted with a sheet like morphology with lateral dimensions of 5-10 mu m and a thickness of similar to 200 nm and a honeycomb nanostructure architecture produced via the self-assembling of vertically grown thin hexagonal nanosheets with a thickness of 2-3 nm. The 3D CdMoS4 marigold nanoflower architecture comprised thin nanopetals with lateral dimensions of 1-2 mu m and a thickness of a few nm. The CdMoS4 and MoS2 structures displayed hydrogen ( H-2) production rates of 25 445 and 12 555 mu mol h(-1) g(-1), respectively. The apparent quantum yields of hydrogen production were observed to be 35.34\% and 17.18\% for CdMoS4 and MoS2, respectively. The 3D nanostructured marigold flowers of CdMoS4 and honeycomb like 2D nanostructure of MoS2 were responsible for higher photocatalytic activity due to inhibition of the charge carrier recombination. The prima facie observation of H-2 production showed that the ternary semiconductor confers enhanced photocatalytic activity for H-2 generation due to its unique structure. Such structures can be designed and implemented in other transition metal dichalcogenide based ternary materials for enhanced photocatalytic and other applications.

}, issn = {2050-7488}, doi = {10.1039/c5ta04617c}, author = {Kadam, Sunil R. and Late, Dattatray J. and Panmand, Rajendra P. and Kulkarni, Milind V. and Nikam, Latesh K. and Gosavi, Suresh W. and Park, Chan J. and Kale, Bharat B.} } @article { ISI:000361532500003, title = {New butenolide cinnamate and other biological active chemical constituents from Polygonum glabrum}, journal = {Natural Product Research}, volume = {29}, number = {22}, year = {2015}, month = {NOV}, pages = {2080-2086}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Phytochemical investigation of the methanol extract of the aerial parts of Polygonum glabrum afforded one new natural product (-)-2-methoxy-2-butenolide-3-cinnamate (1) along with six known compounds, -hydroxyfriedalanol (2), 3-hydroxy-5-methoxystilbene (3), (-) pinocembrin (4), sitosterol-(6-O-palmitoyl)-3-O{\textendash}d-glucopyranoside (5), (-) pinocembrin-5-methyl ether (6) and sitosterol-3-O{\textendash}d-glucopyranoside (7). Compound 1 showed promising in vitro anti-HIV-1 activity against primary isolates HIV-1(UG070) (X4, subtype D) and HIV-1(VB59) (R5, subtype C) assayed using TZM-bl cell line with IC50 in the range of 15.68-22.43g/mL. The extract showed TI in the range of 19.19-27.37 with IC50 in the range of 10.90-15.55g/mL. Compounds 1, 3 and 4 exhibited in vitro anti-mycobacterium activity against Mycobacterium tuberculosis H37Ra with IC50 values of 1.43, 3.33 and 1.11g/mL in dormant phase and 2.27, 3.33 and 1.21g/mL in active phase, respectively. Compound 4 was found to be the most active antiproliferative with IC50 values of 1.88-11.00g/mL against THP-1, A549, Panc-1, HeLa and MCF7 cell lines.

}, keywords = {anti-HIV-1, anti-mycobacterium, antiproliferative, phytochemicals, Polygonaceae, Polygonum glabrum}, issn = {1478-6419}, doi = {10.1080/14786419.2015.1004674}, author = {Said, Madhukar S. and Chinchansure, Ashish A. and Nawale, Laxman and Durge, Ankita and Wadhwani, Ashish and Kulkarni, Smita S. and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000346408800001, title = {Nonconventional chemical inhibitors of microRNA: therapeutic scope}, journal = {Chemical Communications}, volume = {51}, number = {5}, year = {2015}, month = {OCT}, pages = {820-831}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

MicroRNAs (miRNAs) are a class of genomically encoded small RNA molecules (similar to 22nts in length), which regulate gene expression post transcriptionally. The term microRNA or miRNA was coined in 2001, and research in the past decade has shed light on their widespread occurrence, evolutionary conservation and tissue specific functions. It is estimated that they modulate the gene expression of approximately 60\% of the mammalian genes by regulating the levels of target mRNAs to which they can bind on the basis of sequence complementarities. miRNAs are produced in a well coordinated series of steps from being transcribed in the nucleus to exerting their function in the cytoplasm. miRNAs are now implicated in diverse biological phenomena ranging from development to stress response which makes miRNAs one of the central regulatory molecules which modulate information flow along the central dogma of gene expression. More importantly, like any regulatory molecule, deregulation of miRNAs is causally associated with several diseases (mainly cancer) and is directly involved in a variety of pathophysiologies owing to their aberrant expression. Thus, modulation of miRNA levels is of prime therapeutic importance. Conventional methods of miRNA knockdown using chemically modified antisense-oligonucleotides have been explored extensively but face the challenges of modes of delivery, biostability and biodistribution. This calls for the development of more alternative and non-conventional methods to target miRNA. Small molecules targeting RNA chemical and structural space provide one such timely opportunity. In this article we first provide a brief overview of miRNA biogenesis and its disease associations. We then summarize the major developments in conventional oligonucleotide based approaches to miRNA knockdown and its status. We then focus on the more non-conventional methods like oligonucleotide enzymes and small molecules and provide an outlook on the future of such methods.

}, issn = {1359-7345}, doi = {10.1039/c4cc04514a}, author = {Jayaraj, Gopal Gunanathan and Nahar, Smita and Maiti, Souvik} } @article { ISI:000360409800002, title = {Nonomuraea indica sp nov., novel actinomycetes isolated from lime-stone open pit mine, India}, journal = {Journal of Antibiotics}, volume = {68}, number = {8}, year = {2015}, month = {AUG}, pages = {491-495}, publisher = {JAPAN ANTIBIOTICS RESEARCH ASSOC}, address = {2 20 8 KAMIOSAKI SHINAGAWA KU, TOKYO, 141, JAPAN}, abstract = {

A Gram-positive, aerobic, nonmotile actinomycete strain designated DRQ-2(T) was isolated from the soil sample collected from limestone open pit mine from the Gulbarga region, Karnataka province, India. Strain DRQ-2(T) was identified as a member of the genus Nonomuraea by a polyphasic approach. Strain DRQ-2(T) could be differentiated from other members of the genus Nonomuraea on the basis of physiology and 16S rRNA gene sequence analysis. The 16S rRNA gene sequence similarity of strain DRQ-2(T) showed highest sequence similarity to Nonomuraea muscovyensis DSM 45913(T) (99.1\%), N. salmonea DSM 43678(T) (98.2\%) and N. maheshkhaliensis JCM 13929(T) with 98.0\%, respectively. Chemotaxonomic properties showing predominant menaquinones of MK-9 (H-4), MK-9(H-2) and MK-9(H-6), major polar lipids comprised diphosphatidylglycerol, phosphatidylmono methyl ethanolamine (PME), phosphatidylethanolamine (PE), hydroxy-PME (OH-PME), hydroxy PE (OH-PEE), phosphatidylglycerol (PG), ninhydrin-positive phosphoglycolipid and unknown phospholipid, fatty acids with major amounts of i-C-16:0, ai-C-15:0 and ai-C-17:0 supported allocation of the strain to the genus Nonomuraea. Results of DNA-DNA hybridization and physiological tests allowed genotypic and phenotypic differentiation of strain DRQ-2(T) from closely related species. The genomic DNA G+C content of the organism was 72.5 mol\%. On the basis of phenotypic, chemotypic and molecular characteristics, strain DRQ-2(T) represents a novel species of the genus Nonomuraea, for which the name N. indica sp. nov. is proposed, with type strain DRQ-2(T) (= NCIM 5480(T) = CCTCC AA 209050(T)).

}, issn = {0021-8820}, doi = {10.1038/ja.2015.24}, author = {Quadri, Syed Raziuddin and Tian, Xin-Peng and Zhang, Jing and Li, Jie and Nie, Guo-Xing and Tang, Shu-Kun and Al Ruwaili, Jamal and Agsar, Dayanand and Li, Wen-Jun and Dastager, Syed Gulam} } @article { ISI:000361834900002, title = {One step synthesis of ethyl levulinate biofuel by ethanolysis of renewable furfuryl alcohol over hierarchical zeolite catalyst}, journal = {RSC Advances}, volume = {5}, number = {97}, year = {2015}, month = {SEP}, pages = {79224-79231}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Ethanolysis of renewable furfuryl alcohol (FAL) to ethyl levulinate (EL) biofuel over various zeolites viz. H-ZSM-5 (microporous, medium pore), Hierarchical-HZ-5 (combination of micro-and meso pore), H-Beta (microporous, large pore) and Ultra Stable Y (USY, microporous, large pore) was studied in detail. To the best of our knowledge, probably for the first time, Hierarchical-HZ-5 synthesized by desilication post-treatment has been employed as a heterogeneous catalyst for ethanolysis of FAL. The synthesized catalysts were characterized by powder X-ray diffraction (PXRD), temperature programmed NH3 desorption (TPAD), Energy dispersive X-ray analysis (EDAX), etc. Response surface methodology (RSM) with Box-Behnken experimental design (BBD) was used to investigate the influence of three crucial process variables of ethanolysis such as ethanol to FAL molar ratio, percent catalyst loading and reaction temperature on EL yield. The optimization tool of design expert software was employed to obtain the optimum reaction parameters for FAL ethanolysis over Hierarchical-HZ-5 catalyst. Three intermediates of FAL ethanolysis reaction such as, ethoxymethylfuran (EMF), 4,5,5-triethoxypentan-2-one and diethyl ether (DEE) have been identified and quantified from the product mixture with the aid of Gas Chromatography-Mass Spectroscopy (GC-MS). Hierarchical-HZ-5 was found to be a potential catalyst for ethanolysis of FAL with 73\% EL yield and 26\% EMF yield at optimized process parameters.

}, issn = {2046-2069}, doi = {10.1039/c5ra13520f}, author = {Nandiwale, Kakasaheb Y. and Pande, Ashwini M. and Bokade, Vijay V.} } @article { ISI:000359279100022, title = {OpenFOAM computational fluid dynamic simulations of single-phase flows in an advanced-flow reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {54}, number = {30}, year = {2015}, month = {AUG}, pages = {7543-7553}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Computational fluid dynamic (CFD) simulations are carried out for single-Phase flow in an, advanced-flow reactor (AFR) using the open source software OpenFOAM. Excellent agreement of Simulations with experimental pressure drop and residence time distribution (RTD) is obtained. Streamlines, stagnant zones, Velocity profiles, and pressure fields are,obtained at different flow rates ranging from 5 to 100 mL/min. A change in the flow behavior with the presence of recirculation zones is observed with a 40 mL/min flow rate. The extent of the recirculation zones increases with increasing flow rate from 40 to 60 mL/min and is limited further by the presence of a second cylindrical post inside the heart cell, remaining almost constant in the flow rate range of 60-100 mL/min. The RTD is also determined for all flow rates, and a. comparison between different reactor designs (two-post, single-post, and low-flow-reactor-like single-post) is presented. The APR Shows a plug-flow behavior with a small degree of dispersion, which broadens the RTD. Symmetric RTD curves are obtained for the single-post designs, whereas the Gen 1 APR design experiences asymmetry in the RTD at flow rates in the range between 20 and 60 mL/min.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.5b00232}, author = {Nieves-Remacha, Maria Jose and Kukarni, Amok A. and Jensen, Klavs F.} } @article { ISI:000361116500070, title = {Oxidative and membrane stress-mediated antibacterial activity of WS2 and rGO-WS2 nanosheets}, journal = {RSC Advances}, volume = {5}, number = {91}, year = {2015}, month = {AUG}, pages = {74726-74733}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Graphene-based materials have strong cytotoxic attributes against bacteria due to their unique physicochemical properties. We examined the antibacterial activities of nanosheets of the graphene analogue tungsten disulphide (WS2) and a composite of reduced graphene oxide-tungsten disulphide (rGO-WS2), comparing them with reduced graphene oxide (rGO) by a time and concentration dependent viability assay and growth curve studies against four bacterial strains: Gram negative Escherichia coli (E. coli) and Salmonella typhimurium (S. typhimurium), and Gram positive Bacillus subtilis (B. subtilis) and Staphylococcus epidermidis (S. epidermidis). The nanosheets of the rGO-WS2 composite caused a more significant retardation in bacterial growth and inhibitory effect on the tested bacterial strains than WS2, followed by rGO. The tested E. coli and B. subtilis strains were more susceptible than the other strains. A mechanistic study revealed that rGO and WS2 did not produce the superoxide anion (O-2(-)) or reactive oxygen species (ROS), but the nanocomposite of rGO-WS2 did produce both. However, all these materials did oxidize glutathione, which serves as a redox state mediator in bacteria. We conclude that the antimicrobial mechanism is due to the combined effect of initial cell deposition on the rGO-WS2 materials, the membrane stress due to direct contact with the nanosheets, and the produced superoxide anion-independent oxidation mechanisms. The beneficial aspects of the physicochemical properties of rGO-WS2, such as its size and conductivity, can be precisely customized to reduce its health and environmental risk factors.

}, issn = {2046-2069}, doi = {10.1039/c5ra15652a}, author = {Navale, Govinda R. and Rout, Chandra Sekhar and Gohil, Kushal N. and Dharne, Mahesh S. and Late, Dattatray J. and Shinde, Sandip S.} } @article {45882, title = {Pd loaded amphiphilic COF as catalyst for multi-fold Heck reactions, C-C couplings and CO oxidation}, journal = {Scientific Reports}, volume = {5}, year = {2015}, month = {JUN }, pages = {10876}, type = {Article}, abstract = {

COFs represent a class of polymers with designable crystalline structures capable of interacting with active metal nanoparticles to form excellent heterogeneous catalysts. Many valuable ligands/monomers employed in making coordination/organic polymers are prepared via Heck and C-C couplings. Here, we report an amphiphilic triazine COF and the facile single-step loading of Pd-0 nanoparticles into it. An 18-20\% nano-Pd loading gives highly active composite working in open air at low concentrations (Conc. Pd(0) \< 0.05 mol\%, average TON 1500) catalyzing simultaneous multiple site Heck couplings and C-C couplings using {\textquoteleft}non-boronic acid{\textquoteright} substrates, and exhibits good recyclability with no sign of catalyst leaching. As an oxidation catalyst, it shows 100\% conversion of CO to CO2 at 150 degrees C with no loss of activity with time and between cycles. Both vapor sorptions and contact angle measurements confirm the amphiphilic character of the COF. DFT-TB studies showed the presence of Pd-triazine and Pd-Schiff bond interactions as being favorable.

}, issn = {2045-2322}, doi = {10.1038/srep10876}, author = {Mullangi, Dinesh and Nandi, Shyamapada and Shalini, Sorout and Sreedhala, Sheshadri and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article { ISI:000360934800002, title = {Pharmacophore and docking based virtual screening of validated mycobacterium tuberculosis targets}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {18}, number = {7}, year = {2015}, month = {AUG}, pages = {624-637}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Target based virtual screening has surpassed ligand based virtual screening methods in the recent past mainly as it provides more clues regarding intermolecular interactions and takes into consideration the flexible receptor as well. The current methodology describes a computational strategy of predicting Mycobacterium tuberculosis (M. tuberculosis) binders for five well studied targets representing M. tuberculosis proteome encompassing most of the known mechanisms of action. The diversity of the targets was affirmed by their active site analysis and structural studies. The current approach employed pharmacophore searching, docking and clustering techniques in tandem and was validated by enrichment studies using the available Schrodinger data set consisting of 1000 decoys. The application of this methodology was demonstrated by predicting potential molecular targets for fifty newly synthesized compounds. Cross docking studies on the targets were carried out with 4512 known inhibitors utilizing a high performance computing platform to reveal underlying affinity and promiscuity patterns. Optimum binding energy range for all targets as determined by high throughput docking was found to be -3 to -13 kcal/mol.

}, keywords = {Binding energy, docking, Mycobacterium tuberculosis, open source drug discovery (OSDD), pharmacophore, structure based drug design (SBDD)}, issn = {1386-2073}, doi = {10.2174/1386207318666150703112759}, author = {Vyas, Renu and Karthikeyan, Muthukumarasamy and Nainaru, Ganesh and Muthukrishnan, Murugan} } @article { ISI:000348753600040, title = {Phase behavior, diffusion, structural characteristics, and pH of aqueous hydrophobic ionic liquid confined media: insights into microviscosity and microporsity in the [C(4)C(4)im][NTf2] + water system}, journal = {Journal of Physical Chemistry B}, volume = {119}, number = {4}, year = {2015}, month = {JAN}, pages = {1641-1653}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We present our studies on the physicochemical properties of water confined in Dibutylimidazolium bis(trifluoromethanesulfonylimide) ([C(4)C(4)im][NTf2]) reverse micelles through the NMR relaxation measurements that provide us an understanding of microviscosity and pH in the confined condition. We present experimental results on phase behavior, diffusion, structural characteristics and pH in aqueous ionic liquid-confined media. The ternary phase diagram was constructed by the cloud point measurements and the microheterogeneous regions were detected by the measurement of bulk viscosity and diffusion coefficients of K-4[Fe(CN)(6)] inside the homogeneous microemulsion systems through the cyclic voltammetric (CV) measurements. The size of the microemulsion systems was characterized by the dynamic light scattering (DLS) method. The H-1 NMR spectra of homogeneous microemulsion systems were taken which indicates the presence of bound and free water molecules inside the microemulsion system. The NMR spinlattice relaxation time (T-1) of water molecules in its homogeneous microemulsion systems were measured and the reorientational correlation time (t(c)) of water molecules obtained from it indicates that the fluidity of homogeneous confined media decreases with the decrease in the composition of water. Microviscosity of the aqueous confined media was calculated from the measured T-1 relaxation time values by applying the DebyeStokes equation and correlated with the bulk viscosity of the samples. It was observed that both the microviscosity and bulk viscosity show inverse relationship. The fraction of bound and free water molecules were calculated from the measured T-1 values. NMR spinspin relaxation time (T-2) of water molecules in its homogeneous microemulsion systems were measured with the varying pH of the aqueous core. A change in the T-2 relaxation time of the water proton was observed proposing an exchange of proton between the H2O and -OH group of the TX-100 molecules. Finally, methyl orange (MO) was used as a UVvis spectrophotometric molecular probe and the measured lambda(max) values of the probe were used for the detection of micropolarity of the homogeneous aqueous confined media and was found to be increase with the increase in the size of the confined media.

}, issn = {1520-6106}, doi = {10.1021/jp511318t}, author = {Nanda, Raju and Kumar, Anil} } @article { ISI:000355786500005, title = {Phosphonated USY, a promising catalyst for the development of environmentally benign biodiesel (methyl acetate) process}, journal = {Journal of Energy Chemistry}, volume = {24}, number = {3}, year = {2015}, month = {MAY}, pages = {285-290}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The present study focuses on the evaluation of the potential applicability of Ultra Stable Y (USY) and phosphonated USY (1 wt\%-4 wt\% phosphorous loading) as heterogeneous catalysts for biodiesel (methyl acetate) production. The synthesized catalysts were characterized by powder X-ray diffraction (XRD), Brunaer-Emmett-Teller (BET) surface area, total acidity by temperature-programmed desorption of ammonia (TPD-NH3) and Fourier Transform Infrared (FTIR) spectra. The performances of catalysts were evaluated for the transesterification of butyl acetate with methanol (a model reaction in biodiesel production). In view to obtain a maximum yield of methyl acetate, the optimization of process parameters such as reactant molar ratio, catalyst loading, reaction temperature and reaction time was performed. All the phosphonated USY catalysts showed higher catalytic activity than the parent USY, which can be attributed to the increase of total acidity due to phosphonation. 2 wt\% P/USY (2\% phosphorous loaded on USY) exhibited 92\% methyl acetate yield with 100\% selectivity, which was proved to be a potential catalyst for biodiesel production. The invented catalyst was found to be stable and reusable for five catalytic cycles, demonstrating that it might be a environmentally benign catalytic process.

}, keywords = {Biodiesel, methyl acetate, phosphonated USY, transesterification}, issn = {2095-4956}, doi = {10.1016/S2095-4956(15)60313-8}, author = {Nandiwale, Kakasaheb Y. and Gopal, Gahana C. and Bokade, Vijay V.} } @article { ISI:000361212000060, title = {Potent inhibition of miR-27a by neomycin-bisbenzimidazole conjugates}, journal = {Chemical Science}, volume = {6}, number = {10}, year = {2015}, month = {JUL}, pages = {5837-5846}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

miRNAs are important components of regulatory networks that control gene expression and have implications in various diseases including cancer. Targeting oncogenic miRNAs with small molecules is currently being explored to develop cancer therapeutics. Here, we report the development of dual binding neomycin-bisbenzimidazole conjugates that target oncogenic miR-27a with high affinity (K-a = 1.2 to 7.4 x 10(8) M-1). These conjugates bring significant reduction (similar to 65\% at 5 mu M) in mature miRNA levels and penetrate easily in the cells where they localise both in the cytoplasm and the nucleus. Cell cycle analysis showed significant increase in the G0/G1 phase (similar to 15\%) and decrease in the S phase (similar to 7\%) upon treatment with neomycin-bisbenzimidazole conjugates, suggesting inhibition of cell proliferation. Using the conjugation approach, we show that moderately binding ligands can be covalently combined into high affinity binders. This study also highlights the role of linker optimization in designing high affinity ligands for miR-27a targeting.

}, issn = {2041-6520}, doi = {10.1039/c5sc01969a}, author = {Nahar, Smita and Ranjan, Nihar and Ray, Arjun and Arya, Dev P. and Maiti, Souvik} } @article { ISI:000361402600005, title = {Preparation and characterization of flexible ferromagnetic nanocomposites for microwave applications}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {200}, year = {2015}, month = {OCT}, pages = {40-49}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Magnetic Fe3O4 nanoparticles (similar to 20 nm) were synthesized using the chemical co-precipitation method with a view of developing flexible and easily processable ferromagnetic materials with high mouldability to be used as microwave absorbers. The nanoparticles prepared were incorporated into natural rubber through latex stage processing. This novel processing method gives better dispersion of particles in the rubber matrix. The composites were characterized using XRD, SEM, vibrating sample magnetometer, dynamic mechanical analyzer, cavity perturbation, thermogravimetry (TGA), and Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). A notable improvement in the mechanical properties of composites was observed upon adding Fe3O4 particles. Magnetic and microwave characteristics of the composites indicate the formation of a flexible ferromagnetic material with good microwave absorption characteristics. (C) 2015 Published by Elsevier B.V.

}, keywords = {Fe3O4, Ferromagnetic, FTIR-PAS, Microwave absorption, Natural rubber, SEM, XRD}, issn = {0921-5107}, doi = {10.1016/j.mseb.2015.04.014}, author = {Thomas, Teena and Kanoth, Bipinbal P. and Nijas, C. M. and Joy, Pattayil Alias and Joseph, Joseph M. and Kuthirummal, Narayanan and Thachil, Eby T.} } @article { ISI:000349556700067, title = {Process optimization by response surface methodology for transesterification of renewable ethyl acetate to butyl acetate biofuel additive over borated USY zeolite}, journal = {RSC Advances}, volume = {5}, number = {22}, year = {2015}, month = {JAN}, pages = {17109-17116}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Butyl acetate, a renewable biofuel additive was synthesized by transesterification of butanol with ethyl acetate via a renewable and sustainable route. Use of fermentation derived bio-butanol and bio-ethyl acetate for synthesis of butyl acetate would be a more advantageous route over conventional Fischer Esterification. For the first time, a heterogeneous zeolite catalyst such as Ultra Stable Y (USY) and its modified versions obtained by borating on parent USY were used for the synthesis of butyl acetate. Response surface methodology (RSM) was employed to optimize the process parameters for transesterification of butanol with ethyl acetate over a 4\% (w/w) B-USY catalyst. The influence of three crucial process variables such as catalyst loading, molar ratio, and reaction temperature on yield of butyl acetate were addressed by Box-Behnken experimental design (BBD). 4\% (w/w) B-USY was proved to be a potential catalyst with 96\% yield of butyl acetate at optimum process parameters. The 4\% (w/w) B-USY catalyst was found to be reusable for 6 catalytic cycles.

}, issn = {2046-2069}, doi = {10.1039/c4ra14771e}, author = {Nandiwale, Kakasaheb Y. and Galande, Nitish D. and Bokade, Vijay V.} } @article { ISI:000355940900018, title = {Production of polyunsaturated fatty acids in recombinant lipomyces starkeyi through submerged fermentation}, journal = {Bioprocess and Biosystems Engineering}, volume = {38}, number = {7}, year = {2015}, month = {JUL}, pages = {1407-1414}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Long chain polyunsaturated fatty acids (LCPUFA) are known to play an important role in human health and nutrition. Considering the limitation of LCPUFA sources, it is necessary to search new avenues for their production. Oleaginous yeasts are an attractive target for harvesting single cell oil, mainly because of the ease of cultivation with cheaper raw material. Lipomyces starkeyi is one such oleaginous yeast, which can accumulate oil to the extent of 60 \% of its biomass and where genetic transformation can be achieved. In our earlier work, Delta 15 desaturase gene (AEP37840) from flax was transformed into L. starkeyi. In the present work, we report optimization of medium for the production of omega-3 enriched oil from this transformed yeast. A basic medium containing 20 g/l glucose as a carbon source and 10 g/l yeast extract as a nitrogen source was used during fermentation. At regular time intervals, glucose was fed to maintain high C:N ratio (65:10) during fermentation. Under the most favorable conditions, dry biomass and total lipid content were 18 and 7.29 g/l, respectively. Prior to genetic transformation, L. starkeyi contained 56.03 mg/l DHA along with 71.4 mg/l EPA and 42.2 mg/l ALA. Genetic engineering of this yeast resulted in a strain that produced 1080 mg/l DHA (17.4 \%) along with 74.28 mg/l EPA and 126.72 mg/l ALA possibly through modification of PUFA biosynthetic pathway. To the best of our knowledge, this is a first report of DHA enrichment and opens up avenues for LCPUFA production through L. starkeyi.

}, keywords = {Fermentation, LCPUFA, Lipid production, Oleaginous yeast}, issn = {1615-7591}, doi = {10.1007/s00449-015-1382-y}, author = {Salunke, Devyani and Manglekar, Rupali and Gadre, Ramchandra V. and Nene, Sanjay and Harsulkar, Abhay M.} } @conference {42972, title = {Purification and characterization of an agglutinin from datura innoxia with antineoplastic activity}, booktitle = {National Science Day, At CSIR-NCL}, year = {2015}, month = {FEB}, address = {CSIR-National Chemical Laboratory, Pune 411008, India}, abstract = {

Lectins are carbohydrate binding proteins of non-immune origin. Due to their multivalency, lectins can be easily detected using agglutination. Lectins are reported to induce cytotoxicity or inhibition of growth in various cancer cells., hence good therapeutic startegy against cancer. Factors such as specificity, stability, assay rapidity, and costs combine to make lectins attractive diagnostic reagents. Datura innoxia belongs to family of Solanaceae.All parts of the plant are hallucinogenic, hypnotic and narcotic. Application: at low dose acts as pain killer, relieves asthma and rheumatism.

}, author = {Singh, Ruby and Nawale, Laxman and Gaikwad, Sushama M. and Suresha, C. G.} } @conference {42952, title = {Quantitative, automated, high content screening assay approach to anti-angiogenicdrug discovery}, booktitle = {National Science Day, At CSIR-NCL}, year = {2015}, month = {FEB}, address = {Combi Chem-Bio Resource Center, OCD, National Chemical Laboratory, Pune - 411 008}, abstract = {

Angiogenesisenhancescancer,maculardegeneration,etc.. Currentangiogenicassays--indirect,manual,timeconsuming,laborintensive,difficulttoquantify,andexpensive. Wedevelopedanautomated,quantitative,HighContentScreeningangiogenictubeformationassaywouldbenefitdrugdiscoveryforseveraltherapeuticareas. Humanendothelialcellswereseededwithpro-oranti-angiogeniccompoundsonaMatrigelTMlayerina96-wellplate.Afterangiogenictubesformation,thepositivecontrolsandthetestsampleswerefixed,fluorescentlylabeled,automaticallyimagedonCellomics{\textquoteright}ArrayScan{\textregistered}HCSReader,andquantitativelyanalyzedon-the-flybytheTubeFormationBioApplicationsoftwaremodule. Multiplefeaturesrelevantforangiogenesisandangiogenictubeformationwereautomaticallymeasured. Thisrobustandreliableassaythusenabledthelarge-scale,quantitative,screeningandcharacterizationofcompoundsaffectingbothpro-andanti-angiogenicpathways.

}, author = {Nawale, Laxman and Sarkar, Dhiman} } @article { ISI:000362890300003, title = {Rational drug design, synthesis and biological evaluation of dihydrofolate reductase inhibitors as antituberculosis agents}, journal = {Future Medicinal Chemistry}, volume = {7}, number = {8}, year = {2015}, month = {JUN}, pages = {979-988}, publisher = {FUTURE SCI LTD}, address = {UNITED HOUSE, 2 ALBERT PL, LONDON, N3 1QB, ENGLAND}, abstract = {

Background: A series of 2,4-diamino-s-triazines was designed, with potential for activity against Mycobacterium tuberculosis (Mtb) dihydrofolate reductase enzyme, on the basis of virtual screening results and structure-based drug design. Results: The compounds were evaluated against Mtb (H(37)Rv) and their cytotoxicity was assessed using VERO cell lines. Of particular note, two compounds were found to have the most promising antituberculosis activity (6b minimum inhibitory concentration: 1.76 mu M and 6i minimum inhibitory concentration: 1.57 mu M) along with low cytotoxicity (CC50 : \> 300 mu M). The enzyme assay results of these two indicated significant inhibition of Mtb dihydrofolate reductase along with selectivity. Selected derivatives were tested against dormant tubercle bacilli in vivo and ex vivo indicating potential inhibition. Conclusion: This study provides promising antituberculosis dihydrofolate reductase inhibitors that can act as potential leads for further development.

}, issn = {1756-8919}, doi = {10.4155/FMC.15.48}, author = {Tawari, Nilesh R. and Bag, Seema and Raju, Archana and Lele, Arundhati C. and Bairwa, Ranjeet and Ray, Mukti Kanta and Rajan, M. G. R. and Nawale, Laxman U. and Sarkar, Dhiman and Degani, Mariam S.} } @article { ISI:000343686900002, title = {Rational preparation of Ag and Au bimetallic catalysts for the hydrocarbon-SCR of NOx: sequential deposition vs. coprecipitation method}, journal = {Applied Catalysis B-Environmental}, volume = {162}, year = {2015}, month = {JAN}, pages = {11-20}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This study emphasizes the importance of the preparation method for bimetallic Au-Ag catalysts supported on alumina in the selective reduction of NOx by hydrocarbons with gas feed compositions representative of diesel fuelled engine exhaust gas. An optimal balance between oxidative and reductive surface properties is obtained when Au and Ag are successively introduced. Significant re-dispersion processes take place when the catalyst runs at 500 degrees C leading to a gain in activity at low temperature and ascribed to a better interaction between Au and Ag species. Co-precipitation leads to a preferential formation of intermetallic Au-Ag particles which is detrimental to the catalytic performances. Aging at 500 degrees C leads to a significant particle sintering and a strengthening of the metallic character. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Au-Ag particles, Co-precipitation, DeNO(x) reaction, HC-SCR}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.06.031}, author = {More, Pavan M. and Nguyen, D. L. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Nuns, N. and Girardon, J. S. and Dujardin, Christophe and Lancelot, Christine and Mamede, Anne-Sophie and Granger, P.} } @article { ISI:000358219300005, title = {Recent advances in employing homoenolates generated by N-heterocyclic carbene (NHC) catalysis in carbon-carbon bond-forming reactions}, journal = {Chemical Society Reviews}, volume = {44}, number = {15}, year = {2015}, month = {MAY}, pages = {5040-5052}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The use of NHCs for generating homoenolate species has gained widespread popularity in recent years. A number of highly stereoselective processes of NHC-homoenolates have emerged. Homoenolate reactions have also been employed as key steps in the total synthesis of a number of natural products. The use of compatible co-catalysts, improved NHC-catalyst design and the use of novel precursors for homoenolate generation are among the major developments in this area that were disclosed recently. This tutorial review organises and presents the advancements in this rapidly growing area of catalysis and in the process updates a previous account published in 2011 in this journal.

}, issn = {0306-0012}, doi = {10.1039/c5cs00162e}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article {42629, title = {Relativistic extended coupled cluster method for magnetic hyperfine structure constant}, journal = {Physical Review A}, volume = {91}, year = {2015}, month = {FEB}, pages = {Article No. 022512}, type = {Article}, doi = {10.1103/PhysRevA.91.022512}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {43312, title = {Release of a guest by disassembling a capsule through a photo triggering process}, journal = {Organic Letters}, volume = {15}, year = {2015}, month = {JAN}, pages = {4374 - 4377}, author = {Nithyanandhan, Jayaraj and Jagadesan, P. and Samanta, S. R. and Da Silva, J. P. and Ramamurthy, V.} } @article { ISI:000350685400013, title = {Renewable fuels from biomass-derived compounds: Ru-containing hydrotalcites as catalysts for conversion of HMF to 2,5-dimethylfuran}, journal = {Catalysis Science \& Technology}, volume = {5}, number = {3}, year = {2015}, month = {MAR}, pages = {1463-1472}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Production of transportation fuels from renewable biomass is hugely important considering the current ecological concerns over CO2 built up in the atmosphere. Ruthenium-containing hydrotalcite (HT) catalysts were applied for the selective hydrogenolysis of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF). Structural and morphological features of the catalysts were examined using various physico-chemical characterization techniques. The influence of various reaction parameters, such as reaction temperature, solvent, Ru content of the catalyst, etc., was investigated with respect to HMF conversion and DMF yield. The study clearly shows that well-dispersed Ru nanoparticles are highly active and selective in the conversion of HMF to DMF. A catalyst containing only 0.56 wt\% Ru converted 100 mol\% HMF to yield 58 mol\% DMF. This catalyst was found to be recyclable as the activity was retained even after five cycles of reaction. 2-Propanol was found to be a good solvent as it helped to improve DMF yield through transfer hydrogenation. Based on the results of the investigations, a reaction pathway for the conversion of HMF to DMF was proposed for the present Ru-based catalyst system.

}, issn = {2044-4753}, doi = {10.1039/c4cy01376j}, author = {Nagpure, Atul S. and Venugopal, Ashok Kumar and Lucas, Nishita and Manikandan, Marimuthu and Thirumalaiswamy, Raja and Chilukuri, Satyanarayana V.} } @article { ISI:000350674400031, title = {Reversal of H-bonding direction by N-sulfonation in a synthetic reverse-turn peptide motif}, journal = {Organic \& Biomolecular Chemistry}, volume = {13}, number = {10}, year = {2015}, month = {MAR}, pages = {3064-3069}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication depicts an intriguing example of hydrogen-bonding reversal upon introduction of a sulfonamide linkage at the N-terminus of a synthetic reverse-turn peptide motif. The ready availability of two sulfonyl oxygen atoms, as hydrogen-bonding acceptors, combined with the inherent twisted conformation of sulfonamides are seen to act as switches that engage/disengage the hydrogen-bond at the sticky ends/termini.

}, issn = {1477-0520}, doi = {10.1039/c4ob02438a}, author = {Vijayadas, Kuruppanthara N. and Kotmale, Amol S. and Thorat, Shridhar H. and Gonnade, Rajesh G. and Nair, Roshna V. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article {42697, title = {Reverse-hydroformylation: a missing reaction explored}, journal = {Organic Chemistry Frontiers}, volume = {2}, year = {2015}, month = {AUG}, pages = {1422-1424}, abstract = {

Recent progress in transition-metal catalysed acceptor- and acceptorless-reverse hydroformylation of aldehydes for the conversion of olefins has been discussed. The aldehyde feedstock serves as a source for production of syngas and valuable alkenes.

}, doi = {10.1039/C5QO00229J}, author = {Nandakumar, Avanashiappan and Sahoo, Manoj Kumar and Balaraman, Ekambaram} } @article { ISI:000368436000017, title = {Role of methyl jasmonate in the expression of mycorrhizal induced resistance against Fusarium oxysporum in tomato plants}, journal = {Physiological and Molecular Plant Pathology}, volume = {92}, year = {2015}, month = {OCT}, pages = {139-145}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Arbuscular mycorrhiza (AM) colonization led to a decrease in the severity of fusarium wilt disease caused by Fusarium oxysporum f. sp. lycopersici in tomato plants. The involvement of two plant defense hormones, namely methyl jasmonate (MeJA) and salicylic acid (SA), in the expression of mycorrhiza induced resistance (MIR) against this vascular pathogen was studied in the AM colonized and non-colonized (controls) plants. Activity of lipoxygenase (LOX), which plays a role in jasmonic acid (JA) biosynthesis, as well as levels of methyl jasmonate (MeJA) increased in AM colonized plants as compared to controls, but did not show any further changes in response to F. oxysporum inoculation. On the other hand, activity of phenylalanine ammonia lyase (PAL), which is an enzyme from salicylic acid (SA) biosynthetic pathway, as well as SA levels, increased in both controls and AM colonized plants in response to application of F. oxysporum spores. Hence the JA and not the SA signalling pathway appeared to play a role in the expression of MIR against this vascular pathogen. The resistance observed in AM colonized plants was completely compromised when plants were treated with the JA biosynthesis inhibitor salicylhydroxamic acid (SHAM). This confirmed that the AM-induced increase in JA levels was involved in the expression of resistance toward F. oxysporum. The SA response gene pathogenesis-related 1 (PR1) showed an increased expression in response to F. oxysporum infection in SHAM treated AM colonized plants as compared to plants that were not treated with this JA inhibitor. This suggested the possibility that JA inhibited SA responses, at least in the roots. AM colonization therefore appeared to prime plants for improved tolerance against the vascular pathogen F. oxysporum, which was mediated through the JA signalling pathway. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Fusarium wilt, Glomus fasciculatum, Methyl jasmonate, Mycorrhiza induced resistance, Salicylic acid, Tomato}, issn = {0885-5765}, doi = {10.1016/j.pmpp.2015.10.002}, author = {Nair, Aswathy and Kolet, Swati P. and Thulasiram, Hirekodathakallu V. and Bhargava, Sujata} } @article { ISI:000354199900018, title = {Role of N-terminal proline in stabilizing the Ant-Pro zipper motif}, journal = {New Journal of Chemistry}, volume = {39}, number = {5}, year = {2015}, month = {MAR}, pages = {3327-3332}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hetero-chiral hybrid peptides of the general sequence (L)alpha beta(D)(n)alpha beta(n) featuring proline (Pro, a constrained alpha-amino acid) and anthranilic acid (Ant, a constrained beta-amino acid) as building blocks, where n = 2, 4 etc., form a three-dimensional zipper-like architecture. These zipper peptides attain stable conformation by balancing the co-operative contribution of two competing non-covalent forces, namely hydrogen bonding and aromatic stacking. However, the selection of the N-terminal residue also stands to be one of the key contributors in stabilising the unusually long-range intramolecular hydrogen bond, featuring 26 atoms in the H-bonded ring observed at the termini. This article deals with the substitution alterations at the N-terminus of the zipper motif and their consequent influences on its structure and stability. In this study, the N-terminal Pro residue of the zipper motif was substituted with a flexible amino acid, alanine, and a constrained acyclic amino acid, 2-aminoisobutyric acid, to investigate the role of N-terminal proline in stabilizing the Ant-Pro zipper motif, and its stabilities were assessed by employing solution-state NMR and restrained MD simulation studies.

}, issn = {1144-0546}, doi = {10.1039/c4nj02151g}, author = {Kheria, Sanjeev and Nair, Roshna V. and Kotmale, Amol S. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000359951700161, title = {RXR-carbamate - a novel molecular transporter for skin}, journal = {Molecular Therapy}, volume = {23}, number = {1}, year = {2015}, note = {18th Annual Meeting of the American-Society-of-Gene-and-Cell-Therapy (ASGCT), New Orleans, LA, MAY 13-16, 2015}, month = {MAY}, pages = {S64-S64}, publisher = {Amer Soc Gene \& Cell Therapy}, address = {75 VARICK ST, 9TH FLR, NEW YORK, NY 10013-1917 USA}, issn = {1525-0016}, author = {Natarajan, Poornemaa and Patil, Kiran M. and Vij, Manika and Yadav, Amit K. and Kumar, Vaijayanti A. and Ganguli, Munia and Fernandes, Moneesha} } @article {45887, title = {Selective aerobic oxidation of alcohols over Au-Pd/sodium titanate nanotubes}, journal = {Catalysis Communications}, volume = {58}, year = {2015}, month = {JAN }, pages = {149-153}, type = {Article}, abstract = {

catalytic application of Au-Pd nanoparticles supported on sodium titanate nanotubes (NaTNTs) for liquid-phase aerobic oxidation of alcohols is reported, for the first time. This reaction occurs at 80-120 degrees C, 1 atm and solvent-/alkali-free conditions yielding the corresponding carbonyls in high selectivity. This catalyst was reusable and found to be more active/selective than the corresponding monometallic Au and Pd catalysts and Au-Pd/TiO2. Higher dispersion, smaller particle size and higher amount of electron density at gold are the causes for the superior activity of Au-Pd/NaTNT catalyst. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {aerobic oxidation, Alcohol, Bimetallic Au-Pd catalyst, Sodium titanate nanotubes, TiO2}, issn = {1566-7367}, doi = {10.1016/j.catcom.2014.09.018}, author = {Nepak, Devadutta and Darbha, Srinivas} } @article { ISI:000355317200045, title = {Selective inhibition of miR-21 by phage display screened peptide}, journal = {Nucleic Acids Research}, volume = {43}, number = {8}, year = {2015}, month = {APR}, pages = {4342-4352}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

miRNAs are nodal regulators of gene expression and deregulation of miRNAs is causally associated with different diseases, including cancer. Modulation of miRNA expression is thus of therapeutic importance. Small molecules are currently being explored for their potential to downregulate miRNAs. Peptides have shown to have better potency and selectivity toward their targets but their potential in targeting and modulating miRNAs remain unexplored. Herein, using phage display we found a very selective peptide against pre-miR-21. Interestingly, the peptide has the potential to downregulate miR-21, by binding to pre-miR-21 and hindering Dicer processing. It is selective towards miR-21 inside the cell. By antagonising miR-21 function, the peptide is able to increase the expression of its target proteins and thereby increase apoptosis and suppress cell proliferation, invasion and migration. This peptide can further be explored for its anti-cancer activity in vivo and may be even extended to clinical studies.

}, issn = {0305-1048}, doi = {10.1093/nar/gkv185}, author = {Bose, Debojit and Nahar, Smita and Rai, Manish Kumar and Ray, Arjun and Chakraborty, Kausik and Maiti, Souvik} } @article { ISI:000352546100002, title = {Sodium periodate mediated oxidative transformations in organic synthesis}, journal = {Organic \& Biomolecular Chemistry}, volume = {13}, number = {15}, year = {2015}, month = {FEB}, pages = {4374-4394}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The investigation of new oxidative transformations for the synthesis of carbon-heteroatom and heteroatom-heteroatom bonds is of fundamental importance in the synthesis of numerous bioactive molecules and fine chemicals. In this context, NaIO4, an exciting reagent, has attracted increasing attention enabling the development of these unprecedented oxidative transformations that are difficult to achieve otherwise. Thus, NaIO4 has been successfully explored as a versatile oxidant for a variety of fundamental organic transformations such as C-H activation, oxidative functionalization of alkenes and other interesting oxidative transformations and its application in the synthesis of bioactive natural products. This review summarizes recent developments in this area with NaIO4 as a versatile oxidant and brings out many challenges that still remain elusive for the future.

}, issn = {1477-0520}, doi = {10.1039/c5ob00238a}, author = {Sudalai, Arumugam and Khenkin, Alexander and Neumann, Ronny} } @article { ISI:000353167500032, title = {Sophorolipid assisted tunable and rapid gelation of silk fibroin to form porous biomedical scaffolds}, journal = {RSC Advances}, volume = {5}, number = {43}, year = {2015}, month = {MAR}, pages = {33955-33962}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Three dimensional polymer hydrogels, based on both natural and synthetic polymers, are increasingly being used as scaffolds and drug delivery vehicles for biomedical applications. Fibrous protein, silk fibroin (SF), obtained from the Bombyx mori silkworm is a promising candidate in this area. However, SF has a long gelation time of about a few weeks that can only be reduced by non-physiological treatments (e. g. high temperature, ultrasonication and low pH) or by addition of a chemical and non-biodegradable polymer and/or surfactant. We report here accelerated gelation of SF under physiological conditions using a biosurfactant, sophorolipid (SL) as a gelling agent. SL and SF are completely miscible and form a very clear solution upon mixing. Hence it is interesting to see that this clear solution gels in a time span of just a few hours. The hydrogels so formed have pore architecture, porosities and mechanical stability ideally suited for tissue culture applications. Here we also demonstrate that mouse fibroblast cells not only adhere to but also extensively proliferate on these SF-SL scaffolds.

}, issn = {2046-2069}, doi = {10.1039/c5ra04317d}, author = {Dubey, Parul and Nawale, Laxman and Sarkar, Dhiman and Nisal, Anuya and Prabhune, Asmita} } @article {45939, title = {Synthesis and evaluation of thieno[2,3-d]pyrimidin-4(3H)-ones as potential antitubercular agents}, journal = {MedChemComm}, volume = {6}, year = {2015}, month = {AUG}, pages = {2209-2215}, type = {Article}, abstract = {

A number of thieno[2,3-d]pyrimidin-4(3H)-ones were designed, synthesized and screened against Mycobacteria as a part of our program to develop new antitubercular agents. It was observed that some of the compounds have significant antimycobacterial activity against Mycobacterium tuberculosis H37Ra (ATCC 25177) and Mycobacterium bovis BCG (ATCC 35743). The active compounds were studied for cytotoxicity against four cell lines and were found to be non-cytotoxic. The results showed that compounds 13b and 29e were found to exhibit very good antimycobacterial activity (MIC in the range of 6-8 mu M) and the thienopyrimidinones as a class have potential to be developed as antitubercular agents.

}, issn = {2040-2503}, doi = {10.1039/c5md00404g}, author = {Borate, Hanumant B. and Annadate, Ritesh A. and Vagh, Sandip S. and Pisal, Mahesh M. and Deokate, Sagar B. and Arkile, Manisha A. and Jadhav, Nandadeep J. and Nawale, Laxman U. and Sarkar, Dhiman} } @article { ISI:000365710500009, title = {Synthesis, antioxidant, anti-inflammatory, and antimicrobial screening of newer thiophene-fused arylpyrazolyl 1,3,4-oxadiazoles}, journal = {Phosphorus Sulfur and Silicon and the Related Elements}, volume = {190}, number = {11}, year = {2015}, month = {NOV}, pages = {1803-1813}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

A series of newer 1,3,4-oxadiazole derivatives 3a-h, 5a-h containing a thiophene fused with pyrazole moiety of pharmacological significance have been synthesized. The compounds were characterized by H-1 NMR, IR, and mass spectral techniques. The compounds were screened for their in vitro antioxidant, anti-inflammatory and antimicrobial activities. Among them, Compounds 3b (EC50-14.98) and 3f (EC50-12.21) showed significant antioxidant activity. Compound 3a (EC50-15.23) showed good anti-inflammatory activity. Compound 3d was found as the most active derivative against bacterial and fungal strains.

}, keywords = {1, 3, 4-Oxadiazole, Anti-inflammatory, Antimicrobial, Antioxidant, EC50, Thiophene-fused pyrazole}, issn = {1042-6507}, doi = {10.1080/10426507.2015.1024784}, author = {Mahajan, Pravin S. and Nikam, Mukesh and Chate, Asha and Nimbalkar, Urja and Patil, Vrushali and Bobade, Anil and Chaudhari, Abhay and Deolankar, Dattatray and Javale, Balasaheb and Gill, Charansingh H.} } @article { ISI:000360597400020, title = {Synthesis of (+/-) debenzoyl analogs of norsampsones as potential anticancer agents}, journal = {Tetrahedron Letters}, volume = {56}, number = {37}, year = {2015}, month = {SEP}, pages = {5235-5237}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Synthesis of (+/-) debenzoyl analogs of norsampsones 1 and 2 is reported starting from commercially available 1,3-cyclohexadione in six steps with overall yields of 37\% and 36\%, respectively. Compounds 1 and 2 were tested for their anticancer activity and showed moderate anticancer activity against HeLa cell lines. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Acylphloroglucinols, Anticancer, Debenzoyl, Norsampsones}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2015.07.057}, author = {Jadhav, Amol R. and Thombal, Raju S. and Nigam, Preeti and Jadhav, Vrushali H.} } @article {43035, title = {Synthesis of N, F and S co-doped graphene quantum dots}, journal = {Nanoscale}, volume = {7}, year = {2015}, month = {MAY}, pages = {11515-11519}, abstract = {

Graphene quantum dots (GQDs) are a promising category of materials with remarkable size dependent properties like tunable bandgap and photoluminescence along with the possibility of effective chemical functionalization. Doping of GQDs with heteroatoms is an interesting way of regulating their properties. Herein, we report a facile and scalable one-step synthesis of luminescent GQDs, substitutionally co-doped with N, F and S, of similar to 2 nm average size by a microwave treatment of multi-walled carbon nanotubes in a customized ionic liquid medium. The use of an ionic liquid coupled with the use of a microwave technique enables not only an ultrafast process for the synthesis of co-doped GQDs, but also provides excellent photoluminescence quantum yield (70\%), perhaps due to the interaction of defect clusters and dopants.

}, author = {Kundu, Sumana and Yadav, Ram Manohar and Narayanan, T. N. and Shelke, Manjusha V. and Vajtai, Robert and Ajayan, Pulickel M. and Pillai, Vijayamohanan K.} } @article {45942, title = {Synthesis of non-toxic triethyl citrate plasticizer by esterification of renewable citric acid using modified zeolite}, journal = {Clean-Soil Air Water}, volume = {43}, year = {2015}, month = {JUN}, pages = {927-931}, type = {Article}, abstract = {

Triethyl citrate (TEC), a non-toxic plasticizer, was synthesized by esterification of renewable citric acid (CA, from entire waste of oranges) with ethanol over modified H-ZSM-5 (HZ-5) zeolite. Different micro-meso composites (M-HZ-5) with varying crystallinities were prepared by alkaline treatment of HZ-5. M-HZ-5(0.6) (87\% crystallinity) was observed to be a potential and environmentally benign catalyst with 96\% CA conversion, 64\% TEC selectivity (61.44\% TEC yield), and a reusability of six cycles. The probable catalytic mechanism of esterification was also proposed.

}, keywords = {Biowaste, Catalysts, green chemistry, Micro-mesopre composites, reusability}, issn = {1863-0650}, doi = {10.1002/clen.201400189}, author = {Nandiwale, Kakasaheb Y. and Borikar, Sanjay P. and Bokade, Vijay V.} } @article { ISI:000353057300005, title = {Systemic jasmonic acid modulation in mycorrhizal tomato plants and its role in induced resistance against alternaria alternata}, journal = {Plant Biology}, volume = {17}, number = {3}, year = {2015}, month = {MAY}, pages = {625-631}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Tomato plants colonised with the arbuscular mycorrhizal (AM) fungus Glomus fasciculatum show systemic induced resistance to the foliar pathogen Alternaria alternata, as observed in interactions of other AM-colonised plants with a range of pathogens. The role of jasmonic (JA) and salicylic (SA) acid in expression of this mycorrhiza-induced resistance (MIR) against A.alternata was studied by measuring: (i) activity of enzymes reported to be involved in their biosynthesis, namely lipoxygenase (LOX) and phenylammonia lyase (PAL); and (ii) levels of methyl jasmonate (MeJA) and SA. Transcript abundance of some defence genes associated with JA and SA response pathways were also studied. Both LOX and PAL activity increased twofold in response to pathogen application to control plants. AM-colonised plants had three-fold higher LOX activity compared to control plants, but unlike controls, this did not increase further in response to pathogen application. Higher LOX activity in AM-colonised plants correlated with four-fold higher MeJA in leaves of AM-colonised plants compared to controls. Treatment of plants with the JA biosynthesis inhibitor salicylhydroxamic acid (SHAM) led to 50\% lower MeJA in both control and AM-colonised plants and correlated with increased susceptibility to A.alternata, suggesting a causal role for JA in expression of MIR against the pathogen. Genes involved in JA biosynthesis (OPR3) and response (COI1) showed six- and 42-fold higher expression, respectively, in leaves of AM-colonised plants compared to controls. AM-colonised plants also showed increased expression of the SA response gene PR1 and that of the wound-inducible polypeptide prosystemin. Our results suggest that the systemic increase in JA in response to AM colonisation plays a key role in expression of MIR against A. alternata.

}, keywords = {Alternaria alternata, AM colonisation, induced resistance, Methyl jasmonate, salicylhydroxamic acid, Salicylic acid, Solanum lycopersicum}, issn = {1435-8603}, doi = {10.1111/plb.12277}, author = {Nair, A. and Kolet, Swati P. and Thulasiram, H. V. and Bhargava, S.} } @article { ISI:000358624200005, title = {Terahertz spectroscopy and solid-state density functional theory calculations of cyanobenzaldehyde isomers}, journal = {Journal of Physical Chemistry A}, volume = {119}, number = {29}, year = {2015}, month = {JUL}, pages = {7991-7999}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Spectral signatures in the terahertz (THz) frequency region are mainly due to bulk vibrations of the molecules. These resonances are highly sensitive to the relative position of atoms in a molecule as well as the crystal packing arrangement. To understand the variation of THz resonances, THz spectra (2-10 THz) of three structural isomers: 2-, 3-, and 4-cyanobenzaldehyde have been studied. THz spectra obtained from Fourier transform infrared (FTIR) spectrometry of these isomers show that the resonances are distinctly different especially below 5 THz. For understanding the intermolecular interactions due to hydrogen bonds, four molecule cluster simulations of each of the isomers have been carried out using the B3LYP density functional with the 6-31G(d,p) basis set in Gaussian09 software and the compliance constants are obtained. However, to understand the exact reason behind the observed resonances, simulation of each isomer considering the full crystal structure is essential. The crystal structure of each isomer has been determined using X-ray diffraction (XRD) analysis for carrying out crystal structure simulations. Density functional theory (DFT) simulations using CRYSTAL14 software, utilizing the hybrid density functional B3LYP, have been carried out to understand the vibrational modes. The bond lengths and bond angles from the optimized structures are compared with the XRD results in terms of root-mean-square-deviation (RMSD) values. Very low RMSD values confirm the overall accuracy of the results. The simulations are able to predict most of the spectral features exhibited by the isomers. The results show that low frequency modes (\<3 THz) are mediated through hydrogen bonds and are dominated by intermolecular vibrations.

}, issn = {1089-5639}, doi = {10.1021/acs.jpca.5b01942}, author = {Dash, Jyotirmayee and Ray, Shaurnik and Nallappan, Kathirvel and Kaware, Vaibhav and Basutkar, Nitin B. and Gonnade, Rajesh G. and Ambade, Ashootosh V. and Joshi, Kavita and Pesala, Bala} } @article { ISI:000358734800021, title = {Total synthesis of (+)-petromyroxol via tandem alpha-aminoxylation-allylation and asymmetric dihydroxylation-S(N)2 cyclization approach}, journal = {RSC Advances}, volume = {5}, number = {78}, year = {2015}, month = {JUL}, pages = {63311-63317}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The total synthesis of (+)-petromyroxol, a tetrahydrofuran (THF)-diol fatty acid, isolated from sea lamprey larvae (Petromyzon marinus) is reported. The present synthesis employs a tandem alpha-aminoxylationallylation, cross metathesis and tandem asymmetric dihydroxylation-S(N)2 cyclization as key steps.

}, issn = {2046-2069}, doi = {10.1039/c5ra10405j}, author = {Nookaraju, U. and Kumar, Pradeep} } @article { ISI:000363389400005, title = {Transition-metal-catalyzed hydrogen-transfer annulations: access to heterocyclic scaffolds}, journal = {Angewandte Chemie-International Edition}, volume = {54}, number = {38}, year = {2015}, month = {SEP}, pages = {11022-11034}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

The ability of hydrogen-transfer transition-metal catalysts, which enable increasingly rapid access to important structural scaffolds from simple starting materials, has led to a plethora of research efforts on the construction of heterocyclic scaffolds. Transition-metal-catalyzed hydrogen-transfer annulations are environmentally benign and highly atom-economical as they release of water and hydrogen as by-product and utilize renewable feedstock alcohols as starting materials. Recent advances in this field with respect to the annulations of alcohols with various nucleophilic partners, thus leading to the formation of heterocyclic scaffolds, are highlighted herein.

}, issn = {1433-7851}, doi = {10.1002/anie.201503247}, author = {Nandakumar, Avanashiappan and Midya, Siba Prasad and Landge, Vinod Gokulkrishna and Balaraman, Ekambaram} } @article { ISI:000364585200026, title = {Unraveling the success and failure of mode coupling theory from consideration of entropy}, journal = {Journal of Chemical Physics}, volume = {143}, number = {17}, year = {2015}, month = {NOV}, pages = {174504}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

We analyze the dynamics of model supercooled liquids in a temperature regime where predictions of mode coupling theory (MCT) are known to be valid qualitatively. In this regime, the Adam-Gibbs (AG) relation, based on an activation picture of dynamics, also describes the dynamics satisfactorily, and we explore the mutual consistency and interrelation of these descriptions. Although entropy and dynamics are related via phenomenological theories, the connection between MCT and entropy has not been argued for. In this work, we explore this connection and provide a microscopic derivation of the phenomenological Rosenfeld theory. At low temperatures, the overlap between the MCT power law regime and AG relation implies that the AG relation predicts an avoided divergence at T-c, the origin of which can be related to the vanishing of pair configurational entropy, which we find occurring at the same temperature. We also show that the residual multiparticle entropy plays an important role in describing the relaxation time. (C) 2015 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4934986}, author = {Nandi, Manoj Kumar and Banerjee, Atreyee and Sengupta, Shiladitya and Sastry, Srikanth and Bhattacharyya, Sarika Maitra} } @article {43033, title = {Viridians group streptococci in patients undergoing tooth extraction}, journal = {European Journal of General Medicine}, volume = {12}, year = {2015}, month = {SEP}, pages = {227-233}, abstract = {

The aerobic microflora of the oral cavity consists of viridians group of streptococci (VGS). The present study was carried out with an objective to evaluate the prevalence of VGS in patients undergoing tooth extraction and to study their antibiotic susceptibility pattern. Samples of subgingival dental plaques for microbiological studies were collected from 80 patients undergoing tooth extraction. The isolated streptococci were identified along with their antibacterial susceptibilities by automated Vitek 2 (bioM{\'e}rieux) system in accordance with CLSI standards. A total of 260 VGS strains belonging to 05 phenotypic groups, namely mutans, salivarius, anginosus, sanguinus and mitis groups; along with few strains of Granulicatella like G. adiacens and G. elegans. Altogether a total of 15 species were isolated from the subgingival plaque of 80 patients undergoing tooth extraction. Among the 15 antibiotics tested, highest resistance was observed to lincosamides (36.2\%) followed by macrolides (29.7\%), tetracyclines (17.7\%), cephems (15.1\%), fluoroquinolones (14.4\%), oxazolidinones (13.5\%), streptogramins (12.7 \%) and penicillins (7.9\%). However, all the 260 VGS strains were found susceptible to vancomycin and linezolid. In the subgingival plaque of patients undergoing tooth extraction, approximately 70\% of streptococci belonged to three VGS groups, i.e. mitis, sanguinis and mutans groups. Streptococci of salivarus and anginosus groups were isolated sporadically (5\%). Highest resistance was observed to lincosamides and macrolides (29.7\%). Multiple antibiotic resistance was observed in mitis and salivarius group.

}, doi = {10.15197/sabad.1.12.48}, author = {Dhotre, Shree V. and Dharne, Mahesh S. and Potdar, S. and Suklikar, J. and Suryawanshi, Namdev and Nagoba, Basavraj} } @article { ISI:000365445500001, title = {Water-promoted diels-alder reaction in quaternary ammonium salts}, journal = {Journal of Physical Organic Chemistry}, volume = {28}, number = {11}, year = {2015}, month = {NOV}, pages = {665-673}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

{Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO4 act as salting-in (S/I) and LiCl, NaCl act as salting-out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO4 and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R4NX

}, keywords = {Delta G(solvation), Diels-Alder reaction, k(s), kinetic study, solubility, tetraalkylammonium salts, viscosity}, issn = {0894-3230}, doi = {10.1002/poc.3469}, author = {Nagare, Amit S. and Manna, Arpan and Sonawane, Pramod D. and Kumar, Anil} } @article { ISI:000372759100036, title = {Amelioration of excision wounds by topical application of green synthesized, formulated silver and gold nanoparticles in albino Wistar rats}, journal = {Materials Science \& Engineering C-Materials for Biological Applications}, volume = {62}, year = {2016}, month = {MAY}, pages = {293-300}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Wound healing, a complex biological process, has attained a lot of attention as dermatologists are primarily interested in stimulated wound closure without formation of scar or a faint scar. The recent upsurgence of nanotechnology has provided novel therapeutic materials in the form of silver and gold nanoparticles which accelerate the wound healing process. The effect of formulated nanoparticles using Coleus forskohlii root extract (green synthesized) has been tried out for ameliorating full thickness excision wounds in albino Wistar male rats. The evaluation of in vivo activity of nanoparticles in wound healing was carried out on open wounds made by excision on the dorsal sides of albino Wistar rats under anesthesia, and the healing of the wounds was assessed. Histological aspects of the healing process were studied by a HE (Hematoxylin and Eosin) staining method to assess various degrees of re-epithelialization and the linear alignment of the granulation tissue whereas Van Gieson{\textquoteright}s histochemical staining was performed to observe collagen fibers. The healing action shown by the formulated nanoparticles was remarkable during the early stages of wound healing, which resulted in the substantial reduction of the whole healing period. Topical application of formulated gold nanoparticles was found to be more effective in suppressing inflammation and stimulating re-epithelialization compared to silver nanoparticles during the healing process. The results throw light on the amelioration of excision wounds using nanoparticles which could be a novel therapeutic way of improving wound healing in clinical practice. The mechanism of advanced healing action of both types of nanoparticles could be due to their antimicrobial, antioxidant and anti-inflammatory properties. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {collagen, Gold, green synthesis, Nanopraticles, wound Healing}, issn = {0928-4931}, doi = {10.1016/j.msec.2016.01.069}, author = {Naraginti, Saraschandra and Kumari, P. Lakshmi and Das, Raunak Kumar and Sivakumar, A. and Patil, Sagar Hindurao and Andhalkar, Vaibhav Vilas} } @article { ISI:000369587800022, title = {Ammonium catalyzed cyclitive additions: evidence for a cation-pi interaction with alkynes}, journal = {Chemical Communications}, volume = {52}, number = {11}, year = {2016}, month = {DEC}, pages = {2311-2313}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The addition of carbamate nitrogen to a non-conjugated carbon-carbon triple bond is catalyzed by an ammonium salt leading to a cyclic product. Studies in homogeneous systems suggest that the ammonium agent facilitates nitrogen-carbon bond formation through a cation-p interaction with the alkyne unit that, for the first time, is directly observed by Raman spectroscopy.

}, issn = {1359-7345}, doi = {10.1039/c5cc08641h}, author = {Nagy, Edith and St Germain, Elijah and Cosme, Patrick and Maity, Pradip K. and Terentis, Andrew C. and Lepore, Salvatore D.} } @article {43584, title = {Calculation of hyperfine structure constants of small molecules using Z-vector method in the relativistic coupled-cluster framework}, journal = {Journal of Chemical Sciences}, volume = {128}, year = {2016}, month = {OCT}, pages = {1671-1675}, abstract = {The Z-vector method in the relativistic coupled-cluster framework is employed to calculate the parallel and perpendicular components of the magnetic hyperfine structure constant of a few small alkaline earth hydrides (BeH, MgH, and CaH) and fluorides (MgF and CaF). We have compared our Z-vector results with the values calculated by the extended coupled-cluster (ECC) method reported in Phys. Rev. A 91 022512 (2015). All these results are compared with the available experimental values. The Z-vector results are found to be in better agreement with the experimental values than those of the ECC values.}, doi = {10.1007/s12039-016-1174-1}, author = {Sasmal, Sudip and Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {42556, title = {Can a diels-alder reaction accelerate in a supersaturated solvent at room temperature?}, journal = {New Journal of Chemistry}, volume = {40}, year = {2016}, month = {AUG}, pages = {8355-8363}, abstract = {

A new supersaturated solvent is proposed to accelerate the Diels{\textendash}Alder reaction between cyclopentadiene and methyl acrylate by several times. The proposed supersaturated solvent consists of various carbohydrates, organic acid and organic ketone in water, beyond their solubility limits in water, at room temperature. The results demonstrate that the presence of excess {\textendash}OH groups from the carbohydrates plays a pivotal role leading to the increased reactivity and selectivity of the Diels{\textendash}Alder reaction. The role of hydrogen bond accelerators and polarity of the solvent have been analyzed through a comparative study of the same reaction in similar green solvents. Collision-controlled reaction theory has been invoked to understand the role of encounter complexes to accelerate such a reaction at the molecular level in such highly viscous supersaturated solvent. No detrimental effects from the high viscosity of the new solvent medium on the reaction kinetics was been noted.

}, doi = {10.1039/C6NJ01912A}, author = {Nagare, Amit S. and Manna, Arpan and Kumar, Anil} } @article {45839, title = {Capsicum annuum proteinase inhibitor ingestion negatively impacts the growth of sorghum pest Chilo partellus and promotes differential protease expression}, journal = {Biochemistry and Biophysics Reports}, volume = {78}, year = {2016}, month = {DEC}, pages = {302-309}, type = {Article}, abstract = {Background Chilo partellus is an important insect pest infesting sorghum and maize. The larvae internalize in the stem, rendering difficulties in pest management. We investigated the effects of Capsicum annuum proteinase inhibitors (CanPIs) on C. partellus larvae by in-vitro and in-vivo experiments. Methods Recombinant CanPI-7 (with four-Inhibitory Repeat Domains, IRDs), -22 (two-IRDs) and insect proteinase activities were estimated by proteinase assays, dot blot assays and in gel activity assays. Feeding bioassays of lab reared C. partellus with CanPI-7 and -22 were performed. C. partellus proteinase gene expression was done by RT-PCR. In-silico structure prediction of proteinases and CanPI IRDs was carried out, their validation and molecular docking was done for estimating the interaction strength. Results Larval proteinases of C. partellus showed higher activity at alkaline pH and expressed few proteinase isoforms. Both CanPIs showed strong inhibition of C. partellus larval proteinases. Feeding bioassays of C. partellus with CanPIs revealed a dose dependent retardation of larval growth, reduction of pupal mass and fecundity, while larval and pupal periods increased significantly. Ingestion of CanPIs resulted in differential up-regulation of C. partellus proteinase isoforms, which were sensitive to CanPI-7 but were insensitive to CanPI-22. In-silico interaction studies indicated the strong interaction of IRD-9 (of CanPI-22) with Chilo proteinases tested. Conclusions Of the two PIs tested, CanPI-7 prevents induction of inhibitor insensitive proteinases in C. partellus so it can be explored for developing C. partellus tolerance in sorghum. General significance Ingestion of CanPIs, effectively retards C. partellus growth; while differentially regulating the proteinases.}, doi = {10.1016/j.bbrep.2016.09.016}, author = {Jadhav, A. R. and War, A. R. and Nikam, A. N. and Adhav, A. S. and Gupta, V. S. and Sharma, H. C. and Giri, A. P. and Tamhane, V.A.} } @article {43373, title = {CeCl3 center dot 7H(2)O-NaI promoted regioselective sulfenylation of indoles with sulfonylhydrazides}, journal = {Chemistryselect}, volume = {1}, year = {2016}, month = {JAN}, pages = {81-85}, abstract = {A simple and highly efficient method has been developed for the regioselective sulfenylation of a wide variety of indoles with alkyl and aryl sulfonylhydrazides as a sulphur source and CeCl3 center dot 7H(2)O-Nal as an inexpensive and readily available reagent system. This method involves the breaking of sulfur-oxygen and sulfur-nitrogen bonds and making of carbon-sulfur bond. The method provides high yields of the products with enhanced regioselectivity. We studied the reactivity of various electron rich and electron deficient indoles towards the sulfe-nylation reaction. The indoles containing electron donating group reacts fast towards the sulfenylation reaction as compared to the indoles containing electron withdrawing groups. More over functional groups like alkoxy, aryloxy, bromo, nitro, cyano, ester, were well tolerated under the established reaction conditions. We also proposed a plausible mechanism for this transformation. The experimental simplicity and environmentally benign nature of the reagent system makes this method an attractive alternative to established methods.}, doi = {10.1002/slct.201500014}, author = {Nookaraju, U. and Begari, Eeshwaraiah and Yetra, Ravikiran Reddy and Kumar, Pradeep} } @article {43429, title = {CH3NH3Pb(BF4)(3) and (C4H9NH3)2Pb(BF4)(4) family of 3D and 2D perovskites without and with iodide and bromide ions substitution}, journal = {Journal of Physical Chemistry Letters}, volume = {7}, year = {2016}, month = {NOV}, pages = {4757-4762}, abstract = {We report the synthesis of fully molecular ion (BF4 )-based organicinorganic hybrid perovskite CH3NH3Pb(BF4)(3), which is a wide band gap semiconductor, and the same can be easily tuned toward the visible by the incorporation of bromide or iodide ions in the crystal framework simply by changing lead precursors. We have also successfully transformed the distorted 3D molecular-ion-induced perovskite to 2D (C4H9NH3)(2)Pb(BF4)(4), (C4H9NH3)(2)PbBr(4x)(BF4)(x), and (C4H9NH3)(2)PbI(4x)(BF4)(x) perovskites that exhibit the optical absorption over the UV to visible region. The thin films of molecular-ion-containing 2D perovskites with Br and I anions show blue and green luminescence, respectively, under UV illumination.}, doi = {10.1021/acs.jpclett.6b02121}, author = {Nagane, Satyawan and Ogale, Satishchandra B.} } @article {43415, title = {Chemically delaminated free-standing ultrathin covalent organic nanosheets}, journal = {Angewandte Chemie-International Edition}, volume = {55}, year = {2016}, month = {DEC}, pages = {15604-15608}, abstract = {Covalent organic nanosheets (CONs) are a new class of porous thin two-dimensional (2D) nanostructures that can be easily designed and functionalized and could be useful for separation applications. Poor dispersion, layer restacking, and difficult postsynthetic modifications are the major hurdles that need to be overcome to fabricate scalable CON thin films. Herein, we present a unique approach for the chemical exfoliation of an anthracene-based covalent organic framework (COF) to N-hexylmaleimide-functionalized CONs, to yield centimeter-sized free-standing thin films through layer-by-layer CON assembly at the air-water interface. The thinlayer fabrication technique presented here is simple, scalable, and does not require any surfactants or stabilizing agents.}, doi = {10.1002/anie.201607812}, author = {Khayum, M. Abdul and Kandambeth, Sharath and Mitra, Shouvik and Nair, Sanoop B. and Das, Anuja and Nagane, Samadhan S. and Mukherjee, Rabibrata and Banerjee, Rahul} } @article {43574, title = {"Click" polymerization: a convenient strategy to prepare designer fullerene materials}, journal = {Materials \& Design}, volume = {108}, year = {2016}, month = {OCT}, pages = {34-41}, abstract = {"Click" polymeric assemblies of fullerenes, thiophenes and aryl compounds were prepared for the first time to study their spectroscopic/chemical/electronic characteristics and possible applications in photovoltaic cells. The GPC and NMR spectroscopic data confirmed a moderate to high degree of polymerization while microscopic pictures showed well-defined arrangements of fullerenes. The FTIR studies indicated that the product is free from starting azide materials, whereas thermogravimetric analysis data suggested a good stability. Band gap of the material was determined using UV-Vis spectroscopy, cyclic voltammetric techniques and compared with computational investigation. The fullerene copolymer was fabricated as acceptor material in a bulk heterojunction photovoltaic cell. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.matdes.2016.06.059}, author = {Krishnamurthy, Munusamy and Krishnamoorthy, Kothandam and Arulkashmir, Arulraj and Raghavendra, V. and Murali, Adhigan and Jaisankar, Sellamuthu N. and Murugan, P. and Gurusamy-Thangavelu, Senthil A. and Nasar, A. Sultan and Mandal, Asit Baran and Samanta, Debasis} } @article {43425, title = {CO2 Laser direct written MOF-based metal-decorated and heteroatom-doped porous graphene for flexible all-solid-state microsupercapacitor with extremely high cycling stability}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {31841-31848}, abstract = {Over the past decade, flexible and wearable microelectronic devices and systems have gained significant importance. Because portable power source is an essential need of such wearable devices, currently there is considerable research emphasis on the development of planar interdigitated micro energy-torage devices by employing diverse precursor materials to obtain functional materials (functional carbon, oxides, etc.) with the desirable set of properties. Herein we report for the first time the use of metal organic framework (MOF) and zeolitic imidazolate framework (ZIF-67) for high-wavelength photothermal laser direct writing of metal-decorated, heteroatom-doped, porous few-layer graphene electrodes for microsupercapacitor application. We argue that the specific attributes of MOF as a precursor and the high-wavelength laser writing approach (which creates extremely high localized and transient temperature (>2500 degrees C) due to strong absorption by lattice vibrations) are together responsible for the peculiar interesting properties of the carbon material thus synthesized, thereby rendering extremely high cycling stability to the corresponding microsupercapacitor device. Our device exhibits near 100\% retention after 200 000 cycles as well as stability under 150 degrees bending.}, doi = {10.1021/acsami.6b10193}, author = {Basu, Aniruddha and Roy, Kingshuk and Sharma, Neha and Nandi, Shyamapada and Vaidhyanathan, Ramanathan and Rane, Sunit and Rode, Chandrashekhar V. and Ogale, Satishchandra B.} } @article { ISI:000368941700025, title = {Comparative study of dG affinity vs. DNA methylation modulating properties of side chain derivatives of procainamide: insight into its DNA hypomethylating effect}, journal = {RSC Advances}, volume = {6}, number = {7}, year = {2016}, month = {JAN}, pages = {5350-5358}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Procainamide derivatives have been synthesized to investigate the role of side chains in modulating the DNA methylation level in cancer cells and gain insight into its mechanism of action. The synthesized derivatives comprised of flexible (dimethyl), constrained (pyrrolidine, piperidine, morpholine) and planar aromatic (pyridine, phenyl) side chain motifs. The affinity of procainamide and its derivatives towards the deoxyguanosine (dG) base in neutral form has been assessed by performing Differential Pulse Voltammetry (DPV) under physiological conditions. Further, molecular docking with hemimethylated CpG rich DNA acquired from an active mDNMT-1-DNA (PDB ID-4DA4) crystal structure, reveals their preferential non-covalent interaction with dG nucleobase in the intercalation cavity of the minor groove. Differential affinity of the derivatives to dG base in neutral and bound forms (DNA) is correlated with their DNA methylation modulating properties at sub-lethal concentrations. Among all the derivatives, a compound with an aromatic phenyl side chain (1) has shown a highest binding affinity for dG nucleobase in neutral form as well as for partially denatured CpG rich DNA which is attributed to the formation of p/p stacking interaction in addition to N-H/O hydrogen bonding with the pyrimidine ring of dG base. It also shows the highest cytotoxicity and global hypomethylation at a sub-lethal level in the MCF-7 cancer cell line compared to other derivatives and procainamide. A docking study has also illustrated the plausible structural basis of DNA methylation modulating a property of procainamide. Strong association of procainamide with dG bases of partially denatured CpG rich DNA via H-bonding and other non-covalent interactions may alter the active topology of DNA required by the DNA-binding regulatory proteins (e. g. DNMT-1) which is validated by a DNMT-1 inhibition assay. This systematic investigation leads to a new potent alternative to procainamide being found and gives a plausible insight into the DNA hypomethylating effect of procainamide.

}, issn = {2046-2069}, doi = {10.1039/c5ra20012a}, author = {Gawade, Rupesh L. and Chakravarty, Debamitra K. and Debgupta, Joyashish and Sangtani, E. and Narwade, S. and Gonnade, Rajesh G. and Puranik, Vedavati G. and Deobagkar, D. D.} } @article { ISI:000381384300031, title = {Composition dependence of the glass forming ability in binary mixtures: the role of demixing entropy}, journal = {Journal of Chemical Physics}, volume = {145}, number = {3}, year = {2016}, month = {JUL}, pages = {Article Number: 034503}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

We present a comparative study of the glass forming ability of binary systems with varying composition, where the systems have similar global crystalline structure (CsCl+fcc). Biased Monte Carlo simulations using umbrella sampling technique show that the free energy cost to create a CsCl nucleus increases as the composition of the smaller particles is decreased. We find that systems with comparatively lower free energy cost to form CsCl nucleus exhibit more pronounced pre-crystalline demixing near the liquid/crystal interface. The structural frustration between the CsCl and fcc crystal demands this demixing. We show that closer to the equimolar mixture, the entropic penalty for demixing is lower and a glass forming system may crystallize when seeded with a nucleus. This entropic penalty as a function of composition shows a non-monotonic behaviour with a maximum at a composition similar to the well known Kob-Anderson (KA) model. Although the KA model shows the maximum entropic penalty and thus maximum frustration against CsCl formation, it also shows a strong tendency towards crystallization into fcc lattice of the larger {\textquoteleft}{\textquoteleft}A{\textquoteright}{\textquoteright} particles which can be explained from the study of the energetics. Thus for systems closer to the equimolar mixture although it is the requirement of demixing which provides their stability against crystallization, for KA model it is not demixing but slow dynamics and the presence of the {\textquoteleft}{\textquoteleft}B{\textquoteright}{\textquoteright} particles make it a good glass former. The locally favoured structure around {\textquoteleft}{\textquoteleft}B{\textquoteright}{\textquoteright} particles is quite similar to the CsCl structure and the incompatibility of CsCl and fcc hinders the fcc structure growth in the KA model. Although the glass forming binary systems studied here are quite similar, differing only in composition, we find that their glass forming ability cannot be attributed to a single phenomenon. Published by AIP Publishing.

}, issn = {0021-9606}, doi = {10.1063/1.4958630}, author = {Nandi, Ujjwal Kumar and Banerjee, Atreyee and Chakrabarty, Suman and Bhattacharyya, Sarika Maitra} } @article {42631, title = {Crystal engineering of a zwitterionic drug to neutral cocrystals: a general solution for floxacins}, journal = {Chemical Communications}, volume = {52}, year = {2016}, month = {SEP}, pages = {12610-12613}, abstract = {

The transformation of zwitterionic Sparfloxacin (SPX) to the neutral form is achieved by cocrystallization. Neutral forms of drugs are important for higher membrane permeability, while zwitterions are more soluble in water. The twin advantages of higher solubility/dissolution rate and good stability of neutral SPX are achieved in a molecular cocrystal compared to its zwitterionic SPX hydrate. The amine-phenol supra-molecular synthon drives cocrystal formation, with the paraben ester acting as a "proton migrator{\textquoteright}{\textquoteright} for the ionic to neutral transformation.

}, doi = {10.1039/c6cc06627e}, author = {Gunnam, Anilkumar and Suresh, Kuthuru and Ganduri, Ramesh and Nangia, Ashwini} } @article { ISI:000368264800002, title = {Detection of clostridium tetani in human clinical samples using tetX specific primers targeting the neurotoxin}, journal = {Journal of Infection and Public Health}, volume = {9}, number = {1}, year = {2016}, month = {JUL}, pages = {105-109}, publisher = {ELSEVIER SCIENCE LONDON}, address = {84 THEOBALDS RD, LONDON WC1X 8RR, ENGLAND}, abstract = {

Tetanus resulting from ear injury remains an important health problem, particularly in the developing world. We report the successful detection of Clostridium tetani using tetX specific primers targeting the Cl. tetani neurotoxin. The sample was obtained from an ear discharge of a case of otogenic tetanus in a 2-year-old male child. Based on the culture results of the ear discharge, Gram staining and virulence testing by genotyping, a diagnosis of tetanus was confirmed. This is the first report from India on the successful detection of Cl. tetani in a human clinical sample using tetX specific primers targeting the Cl. tetani neurotoxin. (C) 2015 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Limited. All rights reserved.

}, keywords = {Cl. tetani, Neurotoxin, Otogenic tetanus, Trismus}, issn = {1876-0341}, doi = {10.1016/j.jiph.2015.06.014}, author = {Ganesh, Madhu and Sheikh, Nasira K. and Shah, Pooja and Mehetre, Gajanan T. and Dharne, Mahesh S. and Nagoba, Basavraj S.} } @article {45854, title = {Draft genome sequence of arthrobacter enclensis NCIM 5488T for secondary metabolism}, journal = {Genome Announcements}, volume = {4}, year = {2016}, month = {JUN}, pages = {e00497-16}, type = {Article}, abstract = {Here, we report the draft genome sequence of Arthrobacter enclensis NCIM 5488T, an actinobacterium isolated from a marine sediment sample from Chorao Island, Goa, India. This draft genome sequence consists of 4,226,231 bp with a G+C content of 67.08\%, 3,888 protein-coding genes, 50 tRNAs, and 10 rRNAs. Analysis of the genome using bioinformatics tools such as antiSMASH and NaPDoS showed the presence of many unique natural product biosynthetic gene clusters.}, doi = {10.1128/genomeA.00497-16}, author = {Neurgaonkar, P. S. and Dharne, M. S. and Dastager, S. G.} } @article {43311, title = {Effect of out-of-plane alkyl group{\textquoteright}s position in dye-sensitized solar cell efficiency: a structure-property relationship utilizing indoline-based unsymmetrical squaraine dyes}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {DEC}, pages = {35353-35367}, abstract = {

Squaraine dyes are promising chromophores to harvest visible and near-infrared (NIR) photons. A series of indoline-based unsymmetrical squaraine (SQ) dyes that contain alkyl chains at sp(3) C- and N- atoms of indoline moieties with a carboxylic acid anchoring group were synthesized. The optical and electrochemical properties of the SQ dyes in solution were nearly identical as there was no change in the D-A-D SQ framework; however, remarkable changes with respect to the power conversion efficiencies (PCE) were observed depending upon the position of alkyl groups in the dye. Introduction of alkyl groups to the indoline unit that was away from anchoring unit were helped in more dye loading with controlled organization of dyes on surface, increased charge transfer resistance, long electron lifetime, and hence higher PCE than that of the corresponding isomer in which the alkyl groups funtionalized indoline unit contains the carboxylic acid anchoring group. Careful analysis of incident photon-to current conversion efficiency (IPCE) profiles indicated the presence of aggregated structure on the TiO2 surface that contributes to the charge injection in the presence of a coadsorbent. A dye-sensitized solar cell (DSSC) device made out of SQ5 was achieved an efficiency of 9.0\%, with an open-circuit potential (V-oc) of 660 mV and short-circuit current density (J(sc)) of 19.82 mA/cm 2, under simulated AM 1.5G illumination (100 mW/cm(2)). The IPCE profile of SQ5 shows an onset near to 750 nm with a good quantum efficiency (\>80\%) in the range of 550-700 nm, indicating the importance of self-organization of dyes on the TiO2 surface for an efficient charge injection. This present investigation revealed the importance of position of alkyl groups in the squaraine-based dyes for the better PCE.

}, doi = {10.1021/acsami.6b12730}, author = {Alagumalai, Ananthan and Fairoos, Munavvar M. K. and Vellimalai, Punitharasu and Sil, Manik Chandra and Nithyanandhan, Jayaraj} } @article { ISI:000381384300030, title = {Effect of total and pair configurational entropy in determining dynamics of supercooled liquids over a range of densities}, journal = {Journal of Chemical Physics}, volume = {145}, number = {3}, year = {2016}, month = {JUL}, pages = {Article Number: 034502}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

In this paper, we present a study of supercooled liquids interacting with the Lennard Jones potential and the corresponding purely repulsive (Weeks-Chandler-Andersen) potential, over a range of densities and temperatures, in order to understand the origin of their different dynamics in spite of their structures being similar. Using the configurational entropy as the thermodynamic marker via the Adam Gibbs relation, we show that the difference in the dynamics of these two systems at low temperatures can be explained from thermodynamics. At higher densities both the thermodynamical and dynamical difference between these model systems decrease, which is quantitatively demonstrated in this paper by calculating different parameters. The study also reveals the origin of the difference in pair entropy despite the similarity in the structure. Although the maximum difference in structure is obtained in the partial radial distribution function of the B type of particles, the rdf of AA pairs and AB pairs gives rise to the differences in the entropy and dynamics. This work supports the observation made in an earlier study [A. Banerjee et al., Phys. Rev. Lett. 113, 225701 (2014)] and shows that they are generic in nature, independent of density. Published by AIP Publishing.

}, issn = {0021-9606}, doi = {10.1063/1.4958627}, author = {Banerjee, Atreyee and Nandi, Manoj Kumar and Sastry, Srikanth and Bhattacharyya, Sarika Maitra} } @article { ISI:000377424600004, title = {Efficient cellular entry of (r-x-r)-type carbamate-plasmid DNA complexes and its implication for noninvasive topical DNA delivery to skin}, journal = {Molecular Pharmaceutics}, volume = {13}, number = {6}, year = {2016}, month = {JUN}, pages = {1779-1790}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Arginine-rich cell penetrating peptides are powerful tools for in vitro as well as in vivo delivery of a wide plethora of biomolecules. However, presence of consecutive arginine residues leads to enhanced amenability for proteolytic degradation as well as steric hindrances for membrane interactions which compromise its bioavailability. In order to overcome these limitations we previously reported a safe and stable octaarginine based oligomer, i.e., (r-x-r)4-carbamate, where the backbone amide linkages were replaced by carbamate linkages and 6-aminohexanoic acid based spacer moieties were incorporated for better flexibility, hydrophobicity, optimal spacing of guanidinium groups, and protection against proteolytic cleavage; resulting in improved transfection efficiency over its amide counterpart. In the present work we have investigated the mechanism behind this enhanced transfection efficiency and, based on our observations, demonstrate how the synergistic effect of rationalized oligomer designing, complex characteristics, and cell type contributes to overall effective intracellular delivery. Our results indicate that the (r-x-r)4-carbamate plasmid DNA complexes primarily utilize lipid raft dependent pathway of cellular entry more than other pathways, and this possibly facilitates their increased entry in the lipid raft rich milieu of skin cells. We also emphasize the utility of oligomer (r-x-r)4-carbamate as an efficient carrier for topical delivery of nucleic acids in skin tissue. This carrier can be utilized for safe, efficient, and noninvasive delivery of therapeutically relevant macromolecular hydrophilic cargo like nucleic acids to skin.

}, keywords = {Cell penetrating peptides, endocytosis, nucleic acid delivery, skin penetration, transfection}, issn = {1543-8384}, doi = {10.1021/acs.molpharmaceut.5b00915}, author = {Vij, Manika and Natarajan, Poornemaa and Yadav, Amit K. and Patil, Kiran M. and Pandey, Tanuja and Gupta, Nidhi and Santhiya, Deenan and Kumar, Vaijayanti A. and Fernandes, Moneesha and Ganguli, Munia} } @article { ISI:000377203300030, title = {Electronic structure and properties of layered gallium telluride}, journal = {Chemical Physics Letters}, volume = {651}, year = {2016}, month = {MAY}, pages = {148-154}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Layer-dependent electronic structure and properties of gallium monochalcogenides, GaX where X=S, Se, Te, have been investigated using first-principles calculations based on various functionals, with a motivation to assess their use in photocatalytic water splitting. Since hydrogen evolution by water splitting using visible light provides a promising way for solar energy conversion, both theoretical and experimental studies have been carried out on the photochemical hydrogen evolution by GaTe. We also present the Raman spectra of GaTe examined by both theory and experiment. (C) 2016 Elsevier B.V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2016.03.045}, author = {Shenoy, U. Sandhya and Gupta, Uttam and Narang, Deepa S. and Late, Dattatray J. and Waghmare, Umesh V. and Rao, C. N. R.} } @article {42946, title = {[Et3NH][HSO4] catalyzed efficient synthesis of 5-arylidene-rhodanine conjugates and their antitubercular activity}, journal = {Research on Chemical Intermediates}, volume = {42}, year = {2016}, month = {AUG}, pages = {6607-6626}, abstract = {

We have described a highly efficient, safer protocol for the synthesis of 5-arylidene-rhodanine conjugates catalyzed by Bronsted acidic ionic liquid [Et3NH][HSO4] in excellent yields. The protocol offers cost-effective, environmentally benign, solvent-free conditions and recycle-reuse of the catalyst. The synthesized 5-arylidene-rhodanine conjugates were characterized on the basis of (1) H NMR, C-13 NMR and HRMS spectral data. A series of 5-arylidene-rhodanine derivatives 3a-h, 4a-h were synthesized and evaluated for their in vitro antitubercular activity against dormant Mycobacterium tuberculosis H37Ra and M. bovis BCG strains. Moreover, compounds 3a, 3b, 3e, 3f, 3g, 3h and 4f exhibited good antitubercular activity and were also evaluated for anti-proliferative activity against MCF-7, A549 and HCT116 cell lines using modified MTT assay and found to be noncytotoxic. Compounds 3a-h and 4f were further screened for their antibacterial activity against four bacteria strains to assess their selectivity towards M. tuberculosis. Furthermore, in silico ADME prediction of all the tested compounds followed the criteria for orally active drug and, therefore, these compounds may have a good potential for eventual development as oral agents.

}, doi = {10.1007/s11164-016-2484-0}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nawale, Laxman and Yeware, Amar and Sarkar, Dhiman and Shingate, Bapurao B.} } @article {43434, title = {Evaluation of uttroside B, a saponin from Solanum nigrum Linn, as a promising chemotherapeutic agent against hepatocellular carcinoma}, journal = {Scientific Reports}, volume = {6}, year = {2016}, month = {NOV}, pages = {Article Number: 36318}, abstract = {We report, for the first time, the remarkable efficacy of uttroside B, a potent saponin from Solanum nigrum Linn, against liver cancer. The compound has been isolated and characterized from the leaves of Solanum nigrum Linn, a plant widely used in traditional medicine and is a rich resource of several anticancer molecules. Uttroside B, that comprises of beta-D-glucopyranosyl unit at C-26 of the furostanol and beta-lycotetraosyl unit at C-3, is ten times more cytotoxic to the liver cancer cell line, HepG2 (IC50: 0.5 mu M) than sorafenib (IC50: 5.8 mu M), the only FDA-approved drug for liver cancer. Moreover, it induces cytotoxicity in all liver cancer cell lines, irrespective of their HBV status, while being non-toxic to normal immortalized hepatocytes. It induces apoptosis in HepG2 cells by down-regulating mainly the activation of MAPK and mTOR pathways. The drastic reduction in HepG2-xenograft tumor size achieved by uttroside B in NOD-SCID mice and substantiation of its biological safety through both acute and chronic toxicity studies in Swiss albino mice warrants clinical validation of the molecule against hepatic cancer, for which, the chemotherapeutic armamentarium currently has limited weapons.}, doi = {10.1038/srep36318}, author = {Nath, Lekshmi R. and Gorantla, Jaggaiah N. and Thulasidasan, Arun Kumar T. and Vijayakurup, Vinod and Shah, Shabna and Anwer, Shabna and Joseph, Sophia M. and Antony, Jayesh and Veena, Kollery Suresh and Sundaram, Sankar and Marelli, Udaya K. and Lankalapalli, Ravi S. and Anto, Ruby John} } @article {45647, title = {Fluorescent carbon nanodots for targeted in vitro cancer cell imaging}, journal = {Applied Materials Today}, volume = {4}, year = {2016}, month = {SEP}, pages = {71-77}, type = {Article}, abstract = {

Carbon quantum dots (CQDs or C-dots, \<= 10nm in size) are tiny carbon nanoparticles being envisaged in biosensing, bio-imaging and biomolecular/drug delivery. In the present investigation, green fluorescent carbon quantum/nano dots (GCQDs, similar to 3 nm in size) were synthesized through facile chemical slicing method. Further, folic acid (FA) functionalized GCQDs (GCQDs-FA) were obtained to enhance their targeting ability. FA is known to positively influence the binding potential and penetration into the cancer cells because of high abundance of folate receptors (FR) on various cancer cell membranes. We report high biocompatibility, photoluminescence stability and excellent in vitro cancer cell cytoplasm and nucleus targeting performance of GCQDs-FA on MCF-7 breast cancer cells. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Cancer cell bio-imaging, Carbon quantum/nano dots, Cell cytoplasm and nucleus targeting, Green fluorescence, Photoluminescence stability, Targeting ability}, issn = {2352-9407}, doi = {10.1016/j.apmt.2016.07.001}, author = {Aiyer, Sandhya and Prasad, Rajendra and Kumar, Manoj and Niryikar, K. and Jain, Bhanprakash and Kushwaha, Omkar S.} } @article { ISI:000373029500086, title = {Glucose sensing and low-threshold field emission from MnCo2O4 nanosheets}, journal = {RSC Advances}, volume = {6}, number = {35}, year = {2016}, month = {MAR}, pages = {29734-29740}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Manganese cobalt oxide (MnCo2O4) nanosheets were grown on nickel (Ni) foam by a simple electrodeposition method. The as-synthesized nanosheets were characterized using X-ray diffraction and scanning electron microscopy. The Ni foam supports the growth of MnCo2O4 nanosheets without any aggregation, thereby increasing its catalytic and electronic properties. The electrochemical studies show that MnCo2O4 exhibits excellent electrocatalytic activity towards glucose sensing applications. The MnCo2O4 based glucose sensor shows a good sensitivity value of 8.2 mA mM(-1) cm(-2), with a response time of 19 s. In addition to this, field emission studies of as-synthesized MnCo2O4 reveal a low turn-on field value of 1.9 V mm(-1) and good emission current stability, demonstrating MnCo2O4 nanosheets as a good field emitter material.

}, issn = {2046-2069}, doi = {10.1039/c6ra01169a}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and More, Mahendra A. and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {45636, title = {Graphene oxide sheathed ZIF-8 microcrystals: engineered precursors of nitrogen-doped porous carbon for efficient oxygen reduction reaction (ORR) electrocatalysis}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {29373-29382}, type = {Article}, abstract = {

Nitrogen containing mesoporous carbon obtained by the pyrolysis of graphene oxide (GO) wrapped ZIF-8 (Zeolitic Imidazolate Frameworks-8) micro crystals is demonstrated to be an efficient catalyst for the oxygen reduction reaction (ORR). ZIF-8 synthesis in the presence of GO sheets helped to realize layers of graphene oxide over ZIF-8 microcrystals and the sphere-like structures thus obtained, on heat treatment, transformed to highly porous carbon with a nitrogen content of about 6.12\% and surface area of 502 m(2)/g. These catalysts with a typical micromeso porous architecture exhibited an onset potential of 0.88Vvs RHE in a four electron pathway and also demonstrated superior durability in alkaline medium compared to that of the commercial Pt/C catalyst. The N-doped porous carbon derived from GO sheathed ZIF-8 core shell structures could therefore be employed as an efficient electrocatalyst for fuel cell applications.

}, keywords = {alkaline fuel cell, graphene oxide, N-doped carbon, oxygen reduction reaction, porous carbon, ZIF-8}, issn = {1944-8244}, doi = {10.1021/acsami.6b06979}, author = {Thomas, Minju and Illathvalappi, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, Abdul Azeez Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {43310, title = {Heterotriangulene-based unsymmetrical squaraine dyes: synergistic effects of donor moieties and out-of-plane branched alkyl chains on dye cell performance}, journal = {Journal of Materials Chemistry A}, volume = {4}, year = {2016}, month = {NOV}, pages = {18910-18921}, abstract = {Unsymmetrical squaraine sensitizers with two different donor moieties, triphenylamine (NSQR) and heterotriangulene (NSQ1{\textendash}3), for dye-sensitized solar cells (DSSCs) have been designed and synthesized. These dyes utilize the indolium moiety to control charge recombination dynamics at the TiO2-dye-electrolyte interface by connecting linear and branched alkyl functionalities. In the present study, an efficient heterotriangulene (HT) donor and a branched alkyl group at sp3-C atoms were strategically incorporated to increase the power conversion efficiency (PCE) of zwitterionic dyes by improving photo-current density (Jsc) and open-circuit potential (Voc) of the cell. Among these four dyes, NSQ3 exhibited the highest efficiency of 6.73\% with a Jsc of 18.74 mA cm-2, Voc of 0.53 V, and fill factor (ff) of 68.3\%, without any co-adsorbent under an irradiance of 100 mW cm-2 (simulated AM 1.5G sunlight). In the presence of 3α,7α-dihydroxy-5β-cholanic acid (CDCA), NSQ1, NSQ2 and NSQ3 showed an efficiency of 7.07\%, 7.38\% and 7.17\%, respectively. Despite the low Voc, far red light harvesting efficiency, reduced dye aggregation, long lifetime (τ) of injected electrons and high quantum efficiency of NSQ1{\textendash}3 played constructive roles in achieving high PCE efficiency. Deceleration of charge recombination for NSQ dye cells was further studied by electrochemical impedance spectroscopy (EIS) and open-circuit photo-voltage decay (OCVD) measurements.}, doi = {10.1039/C6TA08651A}, author = {Karjule, Neeta and Munavvar, Fairoos M. K. and Nithyanandhan, Jayaraj} } @article { ISI:000381834800016, title = {Hierarchical K/LTL zeolites: synthesis by alkali treatment, characterization and catalytic performance in knoevenagel condensation reaction}, journal = {Journal of Industrial and Engineering Chemistry}, volume = {40}, year = {2016}, month = {AUG}, pages = {128-136}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

The hierarchical K/LTL zeolites prepared by post-synthesis modification with aqueous 1.5 M KOH solution by varying alkali volume to K/LTL zeolite (10-70 ml/g) ratios, were examined in Knoevenagel condensation. The physico-chemical properties of the catalysts were thoroughly evaluated by PXRD, ICP, CO2-TPD, XPS, N-2 adsorption/desorption and Si-29 and Al-22 MAS-NMR. Among all the samples, hierarchical K/LTL prepared by treating K/LTL with 50 ml aqueous 1.5 M KOH solution per gram of K/LTL displayed about 1.5 fold higher catalytic activity as compared to parent K/LTL, presumably because of combined effect of enhanced basicity and molecular diffusion through pore channels. (C)2016 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.

}, keywords = {Basicity, Hierarchical zeolite, K/LTL, Knoevenagel condensation, Micro-mesoporous composite}, issn = {1226-086X}, doi = {10.1016/j.jiec.2016.06.016}, author = {Tangale, Nilesh P. and Sonar, Shilpa K. and Niphadkar, Prashant S. and Joshi, Praphulla N.} } @article { ISI:000378715600028, title = {High hydroxide conductivity in a chemically stable crystalline metal-organic framework containing a water-hydroxide supramolecular chain}, journal = {Chemical Communications}, volume = {52}, number = {54}, year = {2016}, month = {JUN}, pages = {8459-8462}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A chemically stable cationic MOF encapsulating an in situ formed water-hydroxide supramolecular anionic chain is realized for high hydroxide (OH-) ion conductivity in the solid-state (Type A). High OH- ion conductivity and low activation energy of the MOF demonstrate the advantage of the in situ incorporation of OH- ions to achieve efficient OH- ion conduction in the solid-state.

}, issn = {1359-7345}, doi = {10.1039/c6cc04436k}, author = {Nagarkar, Sanjog S. and Anothumakkool, Bihag and Desai, Aamod V. and Shirolkar, Mandar M. and Kurungot, Sreekumar and Ghosh, Sujit K.} } @article { ISI:000380362700025, title = {Highly efficient nitrogen-doped hierarchically porous carbon supported Ni nanoparticles for the selective hydrogenation of furfural to furfuryl alcohol}, journal = {RSC Advances}, volume = {6}, number = {72}, year = {2016}, month = {JUL}, pages = {67662-67668}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Nickel nanoparticles supported on nitrogen doped hierarchically porous carbon (Ni/CN) are found to be highly efficient and reusable catalysts for the selective hydrogenation of biomass-derived furfural to furfuryl alcohol (FA). Various characterization methods were used to study the structural and morphological features of the catalysts. Furfural conversion of 96\% and 95\% FA selectivity was obtained using a 5 wt\% Ni/CN catalyst. This catalyst showed excellent recyclability without any loss in activity and FA selectivity when it was reused four times. The higher catalytic performance is attributed to the nitrogen incorporated hierarchical porous 3D carbon network.

}, issn = {2046-2069}, doi = {10.1039/c6ra14078e}, author = {Kotbagi, Trupti V. and Gurav, Hanmant R. and Nagpure, Atul S. and Chilukuri, Satyanarayana V. and Bakker, Martin G.} } @article { ISI:000368563000102, title = {Hybrid perovskite quantum nanostructures synthesized by electrospray antisolvent-solvent extraction and intercalation}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {1}, year = {2016}, month = {JAN}, pages = {854-861}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Perovskites based on organometal lead halides have attracted great deal of scientific attention recently in the context of solar cells and optoelectronic devices due to their unique and tunable electronic and optical properties. Herein, we show that the use of electrospray technique in conjunction with the antisolventsolvent extraction leads to novel low-dimensional quantum structures (especially 2-D nanosheets) of CH3NH3PbI3- and CH3NH3PbBr3-based layered perovskites with unusual luminescence properties. We also show that the optical bandgaps and emission characteristics of these colloidal nanomaterials can be tuned over a broad range of visible spectral region by compositional tailoring of mixed-halide (I- and Br-based) perovskites.

}, keywords = {2D nanostructure systems, antisolvent-solvent extraction, bandgap tuning, electrospray, nanosheets, perovskite, quantum dots}, issn = {1944-8244}, doi = {10.1021/acsami.5b10208}, author = {Naphade, Rounak and Nagane, Satyawan and Shanker, G. Shiva and Fernandes, Rohan and Kothari, Dushyant and Zhou, Yuanyuan and Padture, Nitin P. and Ogale, Satishchandra} } @article { ISI:000376119000058, title = {Hydrogenation of cinnamaldehyde to hydrocinnamaldehyde over Pd nanoparticles deposited on nitrogen-doped mesoporous carbon}, journal = {RSC Advances}, volume = {6}, number = {50}, year = {2016}, month = {APR}, pages = {44333-44340}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Palladium nanoparticles deposited on nitrogen-doped mesoporous carbon (NMC) were synthesized by simple ultrasonic-assisted method. This novel Pd-NMC catalyst was highly active and selective for the hydrogenation of cinnamaldehyde (CA) to hydrocinnamaldehyde (HCA) at room temperature (30 degrees C) under low H-2 pressure. The nitrogen-free mesoporous carbon (MC) and activated carbon (AC) were also employed as the support for Pd in the liquid-phase hydrogenation of CA. The incorporation of nitrogen into carbon matrix remarkably enhanced the catalytic activity and C=C bond hydrogenation selectivity (HCA selectivity of 93\% with 100\% CA conversion for Pd-NMC) in CA hydrogenation compared to the catalysts with no nitrogen (HCA selectivity of 66 and 47\% for Pd-MC and Pd-AC, respectively). Moreover, Pd-NMC catalyst demonstrated an excellent recyclability without any loss in activity and HCA selectivity when it was reused for six times. The superior catalytic performance of Pd-NMC catalyst in CA hydrogenation is attributed to the small size of Pd nanoparticles due to presence of high nitrogen content (11.6 wt\%) and mesoporous nature of NMC support.

}, issn = {2046-2069}, doi = {10.1039/c6ra04154j}, author = {Nagpure, Atul S. and Gurrala, Lakshmiprasad and Gogoi, Pranjal and Chilukuri, Satyanarayana V.} } @article { ISI:000375602300007, title = {Identification of unintuitive features of sumoylation through mathematical modeling}, journal = {Journal of Biological Chemistry}, volume = {291}, number = {18}, year = {2016}, month = {APR}, pages = {9458-+}, publisher = {AMER SOC BIOCHEMISTRY MOLECULAR BIOLOGY INC}, address = {9650 ROCKVILLE PIKE, BETHESDA, MD 20814-3996 USA}, abstract = {

Sumoylation is a multistep, multienzymatic post-translational modification in which a small ubiquitin-like modifier protein (SUMO) is attached to the target. We present the first mathematical model for sumoylation including enzyme mechanism details such as autosumoylation of E2 and multifunctional nature of SENP. Simulations and analysis reveal three nonobvious properties for the long term response, modeled as an open system: (i) the steady state sumoylation level is robust to variation in several enzyme properties; (ii) even when autosumoylation of E2 results in equal or higher activity, the target sumoylation levels are lower; and (iii) there is an optimal SENP concentration at which steady state target sumoylation level is maximum. These results are qualitatively different for a short term response modeled as a closed system, where e.g. sumoylation always decreases with increasing SENP levels. Simulations with multiple targets suggest that the available SUMO is limiting, indicating a possible explanation for the experimentally observed low fractional sumoylation. We predict qualitative differences in system responses at short post-translational and longer transcriptional time scales. We thus use this mechanism-based model to explain system properties and generate testable hypotheses for existence and mechanism of unexpected responses.

}, issn = {0021-9258}, doi = {10.1074/jbc.M115.676122}, author = {Puntambekar, Shraddha S. and Nyayanit, Dimpal and Saxena, Priyanka and Gadgil, Chetan J.} } @article {42944, title = {In vitro and ex vivo antitubercular activity of diarylheptanoids from the rhizomes of alpinia officinarum hance}, journal = {Natural Product Research}, volume = {30}, year = {2016}, month = {MAR}, pages = {2825-2830}, abstract = {

Phytochemical investigation of methanol extract of the rhizomes of Alpinia officinarum Hance afforded four known diarylheptanoids 1,7-diphenylhept-4-en-3-one (1), 5-hydroxy-1,7-diphenyl-3-heptanone (2), 5-hydroxy-7-(4 {\textquoteright}{\textquoteright}-hydroxy-3 {\textquoteright}{\textquoteright}-methoxyphenyl)-1-phenyl-3-heptanone (3), and 7-(4 {\textquoteright}{\textquoteright}-hydroxy-3 {\textquoteright}{\textquoteright}-methoxyphenyl)-1-phenyl heptan-3-one (4).The acetate derivative of (4), 7-(4 {\textquoteright}{\textquoteright}-actetate-3 {\textquoteright}{\textquoteright}-methoxy phenyl)-1-phenyl heptan-3-one (5), was prepared. These diarylheptanoids exhibited promising in vitro and ex vivo antitubercular activity for the first time against dormant Mycobacterium tuberculosis H37Ra with the IC50 values between 0.3447.69 and 0.1322.91 mu M, respectively. All compounds showed comparable activity against Mycobacterium bovis BCG (dormant phage) and did not show any activity against two gram + ve and two gram -ve bacterial strains. These compounds were also weakly cytotoxic up to 300 mu M against three human cancer cell lines THP-1, Panc-1 and A549.

}, doi = {10.1080/14786419.2016.1149702}, author = {Honmore, Varsha S. and Rojatkar, Supada R. and Nawale, Laxman U. and Arkile, Manisha A. and Khedkar, Vijay M. and Natu, Arun D. and Sarkar, Dhiman} } @article {45641, title = {Inhibition of miR-21 by 3 {\textquoteleft}/5 {\textquoteleft}-serinyl-capped 2 {\textquoteleft}-O-Methyl RNA Interspersed with 2 {\textquoteleft}-O-(2-Amino-3-Methoxypropyl) uridine units}, journal = {Nucleic Acid Therapeutics}, volume = {26}, year = {2016}, month = {OCT}, pages = {327-334}, type = {Article}, abstract = {

miRNAs are highly conserved class of small ncRNAs whose involvement in human pathophysiologies is extensively investigated. MiR-21 is a well established oncogenic miRNA whose deregulation plays a significant role in onset and progression of cancer. The need of novel approaches to downregulate miR-21 is rapidly expanding. Potent inhibition of miR-21 is achieved by chemically modified 2-O-methyl RNA oligonucleotide. The serinol capping at 3 and 5ends and the interspersed 2-O-(R-2-amino-3-methoxypropyl) uridine units enhance the nuclease resistance and efficacy of 2-O-methyl RNA for the inhibition of miR-21. This represents a simple and novel modification for developing oligonucleotide-based therapeutics.

}, keywords = {antagomirs, cancer, microRNA, noncoding RNA, oligonucleotides}, issn = {2159-3337}, doi = {10.1089/nat.2015.0591}, author = {Nahar, Smita and Kotikam, Venubabu and Kumar, Vaijayanti A. and Maiti, Souvik} } @article { ISI:000367940900010, title = {Inverse high internal phase emulsion polymerization (i-HIPE) of GMMA, HEMA and GDMA for the preparation of superporous hydrogels as a tissue engineering scaffold}, journal = {Journal of Materials Chemistry B}, volume = {4}, number = {3}, year = {2016}, month = {NOV}, pages = {450-460}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of novel superporous hydrogels for regenerative medicine were prepared by oil-in-water (o/w) or inverse high internal phase emulsion (i-HIPE) copolymerization of glycerol monomethacrylate (GMMA), 2-hydroxy ethyl methacrylate (HEMA) and glycerol dimethacrylate (GDMA) as a cross-linker using a non toxic solvent and a redox initiator system at the physiological temperature (37 degrees C). The monomer GMMA was synthesized from glycidyl methacrylate (GMA) by an alternative facile method using Amberlyst-15. The described i-HIPEs showed a significantly wider stability window. The polyHIPE hydrogels were characterized by FTIR, BET method for surface area, mercury porosimetry, SEM, DSC, TGA, XRD, compressive strain and strain recovery. The swelling ratio of the hydrogels and their degradation in 0.007 M NaOH and lipase B (Candida antarctica) solutions were determined gravimetrically and the rate of degradation was explained in terms of the molecular structure of the hydrogels. The morphological studies showed that the pore diameter varied between 20 and 30 mu m and the pore throats (interconnecting windows) diameter was in the range of 4-8 mu m. The described polyHIPE hydrogels were found to have an open cell morphology and interconnected pore architecture, which are important characteristics for scaffold applications. The initial cytotoxicity study performed according to ISO-10993-5 indicated cytocompatibility (97\% cell viability) and the subsequent cell seeding and proliferation study exhibited 55-88\% cell viability (increased monotonously from GHG-1 to GHG-5), which could be attributed to modulation of the physical and chemical properties of the hydrogels. The described super porous hydrogels are considered as potential candidates for scaffold materials in tissue engineering applications.

}, issn = {2050-750X}, doi = {10.1039/c5tb01873k}, author = {Nalawade, Archana C. and Ghorpade, Ravindra V. and Shadbar, Sadiqua and Qureshi, Mohammed Shadbar and Chavan, Nayaku and Khan, Ayesha A. and Ponrathnam, S.} } @article { ISI:000372676800002, title = {Isolates of alpinia officinarum hance as COX-2 inhibitors: evidence from anti-inflammatory, antioxidant and molecular docking studies}, journal = {International Immunopharmacology}, volume = {33}, year = {2016}, month = {APR}, pages = {8-17}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Background: Inflammation triggered by oxidative stress can cause various ailments, such as cancer, rheumatoid arthritis, asthma, diabetes etc. In the last few years, there has been a renewed interest in studying the antioxidant and anti-inflammatory action of plant constituents such as flavonoids and diarylheptanoids. Aim: To evaluate the antioxidant, anti-inflammatory activity and the total phenolic content of isolated compounds from Alpinia officinarum rhizomes. Furthermore, molecular docking was performed to study the binding mode of these compounds into the active site of cyclooxygenase-2 (COX -2). Methods: A. officinarum rhizomes were extracted by maceration, using methanol. This extract was further fractionated by partitioning with hexane, chloroform and ethyl acetate and these fractions on further purification resulted in isolation of five pure compounds. Characterization was carried out by using H-1 NMR, C-13 NMR and MS. They were further evaluated for antioxidant and anti-inflammatory activity using carrageenan-induced paw edema model in rats. Molecular docking study was performed using Glide module integrated in Schrodinger molecular modeling software. Results: The compounds were identified as 1,7-diphenylhept-4-en-3-one (1), 5-hydroxy-1,7-diphenyl-3-heptanone (2), 3,5,7-trihydroxyflavone (Galangin, 3), 3,5,7-trihydroxy-4{\textquoteright}-methoxyflavone (Kaempferide, 4) and 5-hydroxy-7-(4 {\textquoteleft}{\textquoteright}-hydroxy-3 {\textquoteleft}{\textquoteright}-methoxyphenyl)-1-phenyl-3-heptanone (5). The compound-3 and compound-5 (10 mg/kg) showed significant (p \< 0.001) antioxidant and anti-inflammatory potential. Moreover, total phenolic content was detected as 72.96 mg and 51.18 mg gallic acid equivalent respectively. All the five isolates were found to be good binders with COX-2 (average docking score -9.03). Conclusions: Galangin and 5-hydroxy-7-(4 {\textquoteleft}{\textquoteright}-hydroxy-3 {\textquoteleft}{\textquoteright}-methoxyphenyl)-1-phenyl-3-heptanone exhibited anti-inflammatory and in-vitro antioxidant activity which may be due to presence of phenolic content in it. The molecular docking study revealed that these compounds have affinity towards COX-2 active site which can further be explored as selective COX-2 inhibitors. The results obtained in this work justify the use of A. officinarum in the treatment of inflammatory disorders like rheumatoid arthritis and inflammatory bowel diseases. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {5-Hydroxy-7-(4 {\textquoteleft}{\textquoteright}-hydroxy-3 {\textquoteleft}{\textquoteright}-methoxyphenyl)-1-phenyl-3-heptanone, Alpinia officinarum, Anti-inflammatory, Antioxidant, COX-2 inhibitors, Galangin}, issn = {1567-5769}, doi = {10.1016/j.intimp.2016.01.024}, author = {Honmore, Varsha S. and Kandhare, Amit D. and Kadam, Parag P. and Khedkar, Vijay M. and Sarkar, Dhiman and Bodhankar, Subhash L. and Zanwar, Anand A. and Rojatkar, Supada R. and Natu, Arun D.} } @article {43393, title = {Kinetic studies on an algal biofilm reactor for raw sewage water treatment}, journal = {Chemical Engineering \& Technology}, volume = {39}, year = {2016}, month = {SEP}, pages = {1629-1635}, abstract = {A packed-bed algae biofilm reactor was developed using porous and nonporous dual packings. The biofilm was cultivated on reticulated polyurethane foam cubes. The nonporous glass Raschig rings were taken as bed support that helps to remove generated gas from the system. The effect of variables such as column length-to-diameter ratio, catalyst cube dimension, and feed flow rate on the treatment of sewage water was studied. The reaction kinetics indicates that the nutrients uptake rate is dependent on both pore and film diffusion. The kinetics of uptake of nutrients follows a pseudo first-order reaction. From the pseudo reaction rate constant, Thiele modulus and effectiveness factor were calculated and a kinetic model equation for fractional nutrient uptake was developed in terms of operating variables. The model can predict the reaction rate with low deviation. The results obtained may be valuable for large-scale treatment of sewage water.}, doi = {10.1002/ceat.201500447}, author = {Gera, Gayatri S. and Yewalkar, Swati N. and Nene, Sanjay and Kulkarni, Bhaskar D. and Kamble, Sanjay P.} } @article {45630, title = {Low band gap benzimidazole COF supported Ni3N as highly active OER catalyst}, journal = {Advanced Energy Materials}, volume = {6}, year = {2016}, month = {DEC }, pages = {Article No:1601189}, abstract = {

Covalent organic frameworks (COFs) have structures and morphologies closely resembling graphenes, whose modular construction permits atomiclevel manipulations. This, combined with their porous structure, makes them excellent catalyst supports. Here, the high electrocatalytic activity of a composite, formed by supporting Ni3N nanoparticles on a benzimidazole COF, for oxygen evolution reaction is shown. The composite oxidizes alkaline water with a near-record low overpotential of 230 mV @ 10 mA cm(-2) (eta(10)). This high activity is attributed to the ability of the COF to confine the Ni3N nanoparticles to size regimes otherwise difficult to obtain and to its low band gap character (1.49 eV) arising from the synergy between the conducting Ni3N nanoparticles and the pi-conjugated COF. The COF itself, as a metalfree self-standing framework, has an oxygen evolution reaction activity with 10 of 400 mV. The periodic structure of the COF makes it serve as a matrix to disperse the catalytically active Ni3N nanoparticles favoring their high accessibility and thereby good charge-transport within the composite. This is evident from the amount of O-2 evolved (230 mmol h(-1) g(-1)), which, to the best of our knowledge, is the highest reported. The work reveals the emergence of COF as supports for electrocatalysts.

}, issn = {1614-6832}, doi = {10.1002/aenm.201601189}, author = {Nandi, Shyamapada and Singh, Santosh Kumar and Mullangi, Dinesh and Illathvalappil, Rajith and George, Leena and Vinod, Chathakudath P. and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article { ISI:000379314700006, title = {Low-overpotential electrocatalytic water splitting with noble-metal-free nanoparticles supported in a sp(3) n-rich flexible COF}, journal = {Advanced Energy Materials}, volume = {6}, number = {13}, year = {2016}, month = {JUL}, pages = {Article No. 1600110}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp(3) nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (\<2 nm sized) non-noble-metal-based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen-evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm(-2). The overpotential observed in the COF-nanoparticle system is the best in class, and is close to the current record of approximate to 200 mV for any noble-metalfree electrocatalytic water splitting system-the Fe-Co-Ni metal-oxide-film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec(-1)) for the reaction. The COF is able to stabilize such small-sized NP in the absence of any capping agent because of the COF-Ni(OH)(2) interactions arising from the N-rich backbone of the COF. Density-functional-theory modeling of the interaction between the hexagonal Ni(OH)(2) nanosheets and the COF shows that in the most favorable configuration the Ni(OH)(2) nanosheets are sandwiched between the sp(3) nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.

}, issn = {1614-6832}, doi = {10.1002/aenm.201600110}, author = {Mullangi, Dinesh and Dhavale, Vishal M. and Shalini, Sorout and Nandi, Shyamapada and Collins, Sean and Woo, Tom and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article {43444, title = {Molecular cloning and in silico studies of physiologically significant trehalase from drosophila melanogaster}, journal = {International Journal of Biological Macromolecules}, volume = {92}, year = {2016}, month = {NOV}, pages = {282-292}, abstract = {Trehalase, a physiologically important glycosidase is known for its crucial role in insect glycometabolism and stress recovery. The present study describes the molecular cloning of a gene fragment, encoding the catalytically active trehalase from Drosophila melanogaster (DmTre) and its heterologous expression in Escherichia coli. The 1275 bp gene was overexpressed in two different vectors viz., pET28a and pCOLD TF and investigated for variable soluble expression, purification and activity of the recombinant enzyme with optimum pH and temperature of enzyme as 6 and 55 degrees C, respectively. The sequence was characterized in silico by subjecting it to homology search, multiple sequence alignment and phylogenetic tree construction revealing its identity to other trehalases which belong to glycoside hydrolase family 37. The deduced amino acid sequence and modeled 3D structure of DmTre possessed all features of trehalase superfamily, including signature motifs and catalytic domain. The active site pocket of recombinant DmTre was compared with the crystal structure of E. coli trehalase identifying Glu424 and Asp226 as the putative catalytic residues. Additionally, enzyme-substrate docking suggests possible involvement of other residues in the catalysis along with Asp226. The present study holds significance in understanding the structural aspects of Drosophila trehalase in spite of unavailabilty of eukaryotic trehalase crystal structure. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.ijbiomac.2016.06.097}, author = {Shukla, Ekta and Thorat, Leena and Bhavnani, Varsha and Bendre, Ameya D. and Pal, J. K. and Nath, B. B. and Gaikwad, Sushama M.} } @conference {45833, title = { New analytical method for rapid analysis and speciation of arsenic in rice}, booktitle = {Arsenic Research and Global Sustainability - Proceedings of the 6th International Congress on Arsenic in the Environment, AS 2016}, year = {2016}, month = {JUN}, publisher = {CRC Press/Balkema}, organization = {CRC Press/Balkema}, address = {Stockholm; Sweden}, abstract = {A new analytical method for the direct quantitative determination of arsenic (As) in rice is presented in this paper. This procedure is capable of performing speciation of As (III) and As (V). Thiamine present in the sample can also be measured by this procedure. Filter-plug inserted inside the reactor cap fixes the hydrogen sulfide gas generated in the reactor vessel. Arsenic along with the hydrogen sulfide is measured by substituting the filter plug with cotton plug without the sulfide absorbent. The hydrogen sulfide also produces pink stain in the detector tube. Arsenic and thiamine are found to be in the molar ratio of 1:1. For determining total As, the arsenate is converted to arsenite by a catalyst incorporated in the reagent, which is converted to arsine by sodium borohydride. The main As species detected in rice samples was inorganic As (III), which is consistent with the reported results. It takes only about 20 minutes to analyze one sample of rice. The present procedure can also analyze biological samples like urine, hair etc.}, url = {https://www.scopus.com/record/display.uri?eid=2-s2.0-85017014788\&origin=inward\&txGid=a426c85a47666658378239ec359b7356}, author = {Nambiar, O. G. B.} } @article {43020, title = {Nitrogen doping in oxygen-deficient Ca2Fe2O5: a strategy for efficient oxygen reduction oxide catalysts}, journal = {ACS Applied Materials and Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {34387{\textendash}34395}, doi = {10.1021/acsami.6b11718}, author = {Jijil, Chamundi P. and Lokanathan, Moorthi and Chithiravel, Sundaresan and Nayak, Chandrani and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Babu, P. D. and Kakade, Bhalchandra A. and Devi, R. Nandini} } @article { ISI:000371693900021, title = {No promoter left behind (NPLB): learn de novo promoter architectures from genome-wide transcription start sites}, journal = {Bioinformatics}, volume = {32}, number = {5}, year = {2016}, month = {MAR}, pages = {779-781}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

Promoters have diverse regulatory architectures and thus activate genes differently. For example, some have a TATA-box, many others do not. Even the ones with it can differ in its position relative to the transcription start site (TSS). No Promoter Left Behind (NPLB) is an efficient, organism-independent method for characterizing such diverse architectures directly from experimentally identified genome-wide TSSs, without relying on known promoter elements. As a test case, we show its application in identifying novel architectures in the fly genome.

}, issn = {1367-4803}, doi = {10.1093/bioinformatics/btv645}, author = {Mitra, Sneha and Narlikar, Leelavati} } @article { ISI:000373739700035, title = {Novel tetrazoloquinoline-rhodanine conjugates: highly efficient synthesis and biological evaluation}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {9}, year = {2016}, month = {MAY}, pages = {2278-2283}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In search of new active molecules against Mycobacterium tuberculosis (MTB) H37Ra and Mycobacterium bovis BCG, a small focused library of rhodanine incorporated tetrazoloquinoline has been efficiently synthesized by using [HDBU][HSO4] acidic ionic liquid. The compound 3c found to be promising inhibitor of MTB H37Ra and M. bovis BCG characterized by lower MIC values 4.5 and 2.0 mu g/mL, respectively. The active compounds were further tested for cytotoxicity against HeLa, THP-1, A549 and PANC-1 cell lines using MTT assay and showed no significant cytotoxic activity at the maximum concentration evaluated. Again, the synthesized compounds were found to have potential antifungal activity. Furthermore, to rationalize the observed biological activity data, the molecular docking study also been carried out against a potential target Zmp1 enzyme of MTB H37Ra, which revealed a significant correlation between the binding score and biological activity for these compounds. The results of in vitro and in silico study suggest that these compounds possess ideal structural requirement for the further development of novel therapeutic agents. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {antifungal, Antitubercular, Cytotoxicity, Docking study, Rhodanine derivatives}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.03.045}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nawale, Laxman and Yeware, Amar and Sarkar, Dhiman and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Shingate, Bapurao B.} } @article {42941, title = {Novel tetrazoloquinoline-thiazolidinone conjugates as possible antitubercular agents: synthesis and molecular docking}, journal = {Medchemcomm}, volume = {7}, year = {2016}, month = {JUL}, pages = {1832-1848}, abstract = {

A novel approach for the synthesis of a new 4-thiazolidinone scaffold was developed by a one-pot three-component cyclocondensation of various tetrazolo quinoline aldehydes 1a-f, acid hydrazide 2a-c, and thioglycolic acid 3 in the presence of [DBUH].OAc] as a catalyst in high yields. All the conjugates were screened for their antimycobacterial activity against MTB H37Ra and M. bovis BCG strains, with the MIC values ranging from 0.99-13.55 mu mol mL(-1) and 0.14-20.11 mu mol mL(-1), respectively. The 4-thiazolidinone-incorporated tetrazoloquinoline derivatives 4a, 4d, 4g, 4j, 4m, and 4p were highly potent against MTB H37Ra and M. bovis BCG strains. The most active compounds were also evaluated for their cytotoxicity against MCF-7, A549, and HCT 116 cell lines and were found to be non-cytotoxic. Further, molecular docking studies into the active site of the InhA enzyme revealed a similar binding mode to the native ligand in the crystal structure, thereby helping us to understand the ligand-protein binding interaction and establish a structural basis for the inhibition of mycobacterium tuberculosis. The results suggest that the tetrazoloquinoline-thiazolidinone conjugates 4a, 4d, 4g, 4j, 4m, and 4p are promising antitubercular agents.

}, doi = {10.1039/c6md00278a}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Shingate, Bapurao B. and Nawale, Laxman and Sarkar, Dhiman and Khedkar, Vijay M.} } @article { ISI:000370104700016, title = {Optimization by box-behnken experimental design fur synthesis of n-hexyl levulinate biolubricant over hierarchical H-ZSM-5: an effort towards agricultural waste minimization}, journal = {Process Safety and Environmental Protection}, volume = {99}, year = {2016}, month = {JAN}, pages = {159-166}, publisher = {INST CHEMICAL ENGINEERS}, type = {Article}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

The present study is devoted to develop efficient catalytic process for conversion of agricultural waste feedstock to value added chemicals. In this context, the n-hexyl levulinate, a renewable biolubricant was synthesized by esterification of biomass derived levulinic acid (LA) with n-hexanol in a closed batch system. Hierarchical-HZ-5 (modified H-ZSM-5) was used as a heterogeneous acid catalyst. There are no reports available on the synthesis of n-hexyl levulinate biolubricant using renewable levulinic acid. The process variables such as catalyst to LA ratio (X-1), n-hexanol to LA molar ratio (X-2), reaction time (X-3) and reaction temperature (X-4) were optimized by response surface methodology (RSM), using the Box-Behnken model. Analysis of variance was done to check the suitability and significance of the quadratic model. The yield of n-hexyl levulinate obtained was 97\% with 100\% selectivity at optimum process parameters. The RSM analysis predicted that catalyst to LA ratio is most significant (value of p \< 0.0001) and n-hexanol to LA molar ratio is least significant (value of p = 0.0064) process parameter in esterification. The quadratic model established was revealed to be suitable and statistically precise with correlation value (R-2) of 0.9837 to predict the yield of n-hexyl levulinate. (C) 2015 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

}, keywords = {Agricultural waste feedstock, Esterification, Hierarchical-HZ-5, n-Hexyl levulinate, Optimization, Response surface methodology}, issn = {0957-5820}, doi = {10.1016/j.psep.2015.11.003}, author = {Nandiwale, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000367335200014, title = {Orientation effect induced selective chelation of Fe2+ to a glutamic acid appended conjugated polymer for sensing and live cell imaging}, journal = {Journal of Materials Chemistry B}, volume = {4}, number = {2}, year = {2016}, month = {DEC}, pages = {299-308}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Intracellular detection and imaging of labile iron(II) pools is very important in tracking physiological processes that demand new and rapid sensing probes. In this report, we present a water soluble polymer based probe for the fluorescence sensing and live cell imaging of labile Fe2+ ions with high selectivity for the first time. The polymer probe was based on conjugated polyfluorene which was appended with amino acid (L-glutamic acid). The biocompatibility of the polymer was confirmed from an MTT assay which demonstrated \>90\% cell viability even at 300 mu g ml(-1) loading of polymers. Simple glutamic acid did not show selectivity towards any of the divalent ions. However, glutamic acid appended polyfluorene exhibited selective chelation to Fe2+ ions resulting in immediate sensing activity for Fe2+ ions in water and living cells with fluorescence turn-off response. The limit of detection of the PF-Ph-GA polymer probe was 46 (+/- 2) nM which indicated high sensitivity for Fe2+ over other ions reported in the literature. The polymer also exhibited improved sensing activity in the range of intracellular pH (5-9) which is advantageous in differentiating endogenous changes. The probe was successfully applied for the fluorescence imaging of intracellular and supplemented labile iron(II) pools in living HeLa cells.

}, issn = {2050-750X}, doi = {10.1039/c5tb02293b}, author = {Senthilkumar, T. and Parekh, Nimisha and Nikama, Shrikant B. and Asha, S. K.} } @article {45826, title = {Oxidation of linezolid by permanganate in acidic medium: Pd(II) catalysis, kinetics and pathways}, journal = {Progress in Reaction Kinetics and Mechanism}, volume = {41}, year = {2016}, month = {OCT}, pages = {245-257}, type = {Article}, abstract = {

The uncatalysed and Pd(II)-catalysed oxidation of linezolid (LNZ) by permanganate (PMGT) in acidic medium was carried out in the pH range from 3.0 to 6.0. The second order rate constants were found to decrease with increase in pH. The apparent second order rate constants for the uncatalysed reaction were, for example, k {\textquoteleft}{\textquoteright}(app)= 6.32 dm(3) mol(-1) at pH 3.0 and k {\textquoteleft}{\textquoteright}(app). = 2.64 dm(3) mol(-1) s(-1) at pH 6.0 and at 25 +/- 0.2 degrees C and for the Pd(II)-catalysed reaction the total apparent second order rate constants were k {\textquoteleft}{\textquoteright}(app) = 75.5 dm(3) mol(-1) s(-1) at pH 3.0 and k {\textquoteleft}{\textquoteright}(app). = 45.66 dm(3) mol(-1) s(-1) at pH 6.0 and at 25 +/- 0.2 degrees C. The rate constant of the Pd(II)-catalysed reaction was thus ten times higher than for the uncatalysed reaction. The oxidation products of the reaction were identified using high resolution LC-MS. The reaction progresses via formation of a Pd-LNZ complex, which reacts with acidic PMGT to form an intermediate compound, which then decomposes to give oxidised products. The dependence of the rate of reaction on various parameters, such as pH, temperature, [LNZ], [PMGT], [Pd(II)], dielectric constant and ionic strength were studied and activation parameters for the reaction were evaluated and discussed.

}, issn = {1468-6783}, doi = {10.3184/146867816X14696298762238}, author = {Kulkarni, Raviraj M. and Hanagadakar, Manjunath S. and Malladi, Ramesh S. and Santhakumari, B. and Nandibewoor, Sharanappa T.} } @article { ISI:000380182400035, title = {Palladium-catalyzed internal nucleophile-assisted hydration-olefin insertion cascade: diastereoselective synthesis of 2,3-dihydro-1H-inden-1-ones}, journal = {Organic Letters}, volume = {18}, number = {14}, year = {2016}, month = {JUL}, pages = {3442-3445}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A novel palladium-catalyzed hydration-olefin insertion cascade assisted by internal nucleophiles was developed for the synthesis of biologically significant 2,3-dihydro-1H-inden-1-ones under mild conditions. A detailed mechanistic study revealed that the assistance of the internal nucleophiles is crucial to trigger the cascade reaction via nucleopalladation of the alkyne moiety. The overall reaction is equivalent to regioselective hydration of alkynes followed by intramolecular Michael addition. This highly efficient and 100\% atom-economical domino sequence afforded cis-2,3-disubstituted 2,3-dihydro-1H-inden-1-ones in excellent yields (up to 99\%) with complete diastereoselectivity.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.6b01623}, author = {Vinoth, Perumal and Nagarajan, Subbiah and Maheswari, C. Uma and Sudalai, Arumugam and Pace, Vittorio and Sridharan, Vellaisamy} } @article {45868, title = {Peeping into genomic architecture by re-sequencing of Ochrobactrum intermedium M86 strain during laboratory adapted conditions}, journal = {Genomics Data}, volume = {8}, year = {2016}, month = {JUN}, pages = { 72-76}, type = {Article}, abstract = {Advances in de novo sequencing technologies allow us to track deeper insights into microbial genomes for restructuring events during the course of their evolution inside and outside the host. Bacterial species belonging to Ochrobactrum genus are being reported as emerging, and opportunistic pathogens in this technology driven era probably due to insertion and deletion of genes. The Ochrobactrum intermedium M86 was isolated in 2005 from a case of non-ulcer dyspeptic human stomach followed by its first draft genome sequence in 2009. Here we report re-sequencing of O. intermedium M86 laboratory adapted strain in terms of gain and loss of genes. We also attempted for finer scale genome sequence with 10 times more genome coverage than earlier one followed by comparative evaluation on Ion PGM and Illumina MiSeq. Despite their similarities at genomic level, lab-adapted strain mainly lacked genes encoding for transposase protein, insertion elements family, phage tail-proteins that were not detected in original strain on both chromosomes. Interestingly, a 5 kb indel was detected in chromosome 2 that was absent in original strain mapped with phage integrase gene of Rhizobium spp. and may be acquired and integrated through horizontal gene transfer indicating the gene loss and gene gain phenomenon in this genus. Majority of indel fragments did not match with known genes indicating more bioinformatic dissection of this fragment. Additionally we report genes related to antibiotic resistance, heavy metal tolerance in earlier and re-sequenced strain. Though SNPs detected, there did not span urease and flagellar genes. We also conclude that third generation sequencing technologies might be useful for understanding genomic architecture and re-arrangement of genes in the genome due to their ability of larger coverage that can be used to trace evolutionary aspects in microbial system. }, doi = {10.1016/j.gdata.2016.04.003}, author = {Gohil, K. N. and Neurgaonkar, P. S. and Paranjpe, A. and Dastager, S. G. and Dharne, M. S.} } @article { ISI:000378715600002, title = {Pharmaceutical cocrystals: walking the talk}, journal = {Chemical Communications}, volume = {52}, number = {54}, year = {2016}, month = {MAY}, pages = {8342-8360}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Pharmaceutical cocrystals belong to a sub-class of cocrystals wherein one of the components is a drug molecule (or an active pharmaceutical ingredient, API) and the second is a benign food or drug grade additive (generally regarded as safe, GRAS). The two components are hydrogen-bonded in a fixed stoichiometric ratio in the crystal lattice. In the past decade, pharmaceutical cocrystals have demonstrated significant promise in their ability to modify the physicochemical and pharmacokinetic properties of drug substances, such as the solubility and dissolution rate, bioavailability, particle morphology and size, tableting and compaction, melting point, physical form, biochemical and hydration stability, and permeability. In this feature review, we highlight some prominent examples of drug cocrystals which exhibit variable hardness/softness and elasticity/plasticity depending on coformer selection, improvement of solubility and permeability in the same cocrystal, increase of the melting point for solid formulation, enhanced color performance, photostability and hydration stability, and a longer half-life. Cocrystals of flavanoids and polyphenols can make improved pharmaceuticals and also extend to the larger class of nutraceuticals. The application of crystal engineering to assemble ternary cocrystals expands this field to drug-drug cocrystals which may be useful in multi-drug resistance, mitigating side effects of drugs, or attenuating/enhancing drug action synergistically by rational selection. The advent of new techniques for structural characterization beyond the standard X-ray diffraction will provide a better understanding of drug phases which are at the borderline of crystalline-amorphous nature and even newer opportunities in the future.

}, issn = {1359-7345}, doi = {10.1039/c6cc02943d}, author = {Bolla, Geetha and Nangia, Ashwini} } @article { ISI:000372684900009, title = {Photocatalytic H-2 evolution from water-methanol mixtures on InGaO3(ZnO)(m) with an anisotropic layered structure modified with CuO and NiO cocatalysts}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {415}, year = {2016}, month = {MAY}, pages = {82-88}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

InGaO3(ZnO)(m) series of oxides is found to be active for photocatalytic H-2 evolution from water-methanol mixtures. The structure of this series is highly anisotropic with InO6 octahedral layers sandwiching Ga/ZnOn polyhedra. The structural anisotropy in which the conducting layer is spatially separated from the charge generation sites may help in suppressing charge recombination and consequently enhance catalytic activity. The band gaps of the series obtained from absorption spectra are above 3.6 eV and hence they are not active under visible light irradiation. H-2 evolution is considerably enhanced under UV light on employing NiO as cocatalyst due to facile electron transfer from InGaO3(ZnO)(m). to NiO. However, when CuO is used as cocatalyst, visible light activity could be brought out. Due to the very low band gap of CuO, it can act as a sensitizer absorbing in visible light. The band positions become conducive for H-2 evolution due to band alignments consequent to electron accumulation in CuO conduction band. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {InGaO3(ZnO)(m), photocatalytic water splitting, visible light, XPS, XRD}, issn = {1381-1169}, doi = {10.1016/j.molcata.2016.01.018}, author = {Narendranath, Soumya B. and Thekkeparambil, Saranya V. and George, Leena and Thundiyil, Shibin and Devi, R. Nandini} } @article { ISI:000372425600097, title = {Physicochemical and antimicrobial photodynamic chemotherapy of unsymmetrical indium phthalocyanines alone or in the presence of magnetic nanoparticles}, journal = {New Journal of Chemistry}, volume = {40}, number = {3}, year = {2016}, month = {JAN}, pages = {2710-2721}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An AB(3) type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B-3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.

}, issn = {1144-0546}, doi = {10.1039/c5nj01922b}, author = {Osifeko, Olawale L. and Uddin, Imran and Mashazi, Philani N. and Nyokong, Tebello} } @article { ISI:000375559600001, title = {Phytogenic silver, gold, and bimetallic nanoparticles as novel antitubercular agents}, journal = {International Journal of Nanomedicine}, volume = {11}, year = {2016}, month = {MAY}, pages = {1889{\textemdash}1897}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Purpose: Multi- and extensively drug-resistant tuberculosis (TB) is a global threat to human health. It requires immediate action to seek new antitubercular compounds and devise alternate strategies. Nanomaterials, in the present scenario, have opened new avenues in medicine, diagnosis, and therapeutics. In view of this, the current study aims to determine the efficacy of phytogenic metal nanoparticles to inhibit mycobacteria. Methods: Silver (AgNPs), gold (AuNPs), and gold-silver bimetallic (Au-AgNPs) nanoparticles synthesized from medicinal plants, such as Barleria prionitis, Plumbago zeylanica, and Syzygium cumini, were tested against Mycobacterium tuberculosis and M. bovis BCG. In vitro and ex vivo macrophage infection model assays were designed to determine minimum inhibitory concentration (MIC) and half maximal inhibitory concentration of nanoparticles. Microscopic analyses were carried out to demonstrate intracellular uptake of nanoparticles in macrophages. Besides this, biocompatibility, specificity, and selectivity of nanoparticles were also established with respect to human cell lines. Results: Au-AgNPs exhibited highest antitubercular activity, with MIC of \<2.56 mu g/mL, followed by AgNPs. AuNPs did not show such activity at concentrations of up to 100 mu g/mL. In vitro and ex vivo macrophage infection model assays revealed the inhibition of both active and dormant stage mycobacteria on exposure to Au-AgNPs. These nanoparticles were capable of entering macrophage cells and exhibited up to 45\% cytotoxicity at 30 mu g/mL (ten times MIC concentration) after 48 hours. Among these, Au-AgNPs synthesized from S. cumini were found to be more specific toward mycobacteria, with their selectivity index in the range of 94-108. Conclusion: This is the first study to report the antimycobacterial activity of AuNPs, AgNPs, and Au-AgNPs synthesized from medicinal plants. Among these, Au-AgNPs from S. cumini showed profound efficiency, specificity, and selectivity to kill mycobacteria. These should be investigated further to develop novel TB nanoantibiotics.

}, keywords = {Antimycobacterial agent, Cytotoxicity, drug resistance, Mycobacteria, Nanoparticles, tuberculosis}, issn = {1178-2013}, doi = {10.2147/IJN.S102488}, author = {Singh, Richa and Nawale, Laxman and Arkile, Manisha A. and Wadhwani, Sweety and Shedbalkar, Utkarsha and Chopade, Snehal and Sarkar, Dhiman and Chopade, Balu Ananda} } @article {43572, title = {PolyHIPE derived freestanding 3D carbon foam for cobalt hydroxide nanorods based highperformance supercapacitor}, journal = {Scientific Reports}, volume = {6}, year = {2016}, month = {OCT}, pages = {Article Number: 35490}, abstract = {The current paper describes enhanced electrochemical capacitive performance of chemically grown Cobalt hydroxide (Co(OH)(2)) nanorods (NRs) decorated porous three dimensional graphitic carbon foam (Co(OH)(2)/3D GCF) as a supercapacitor electrode. Freestanding 3D porous GCF is prepared by carbonizing, high internal phase emulsion (HIPE) polymerized styrene and divinylbenzene. The PolyHIPE was sulfonated and carbonized at temperature up to 850 degrees C to obtain graphitic 3D carbon foam with high surface area (389 m(2) g(-1)) having open voids (14 mu m) interconnected by windows (4 mu m) in monolithic form. Moreover, entangled Co(OH)(2) NRs are anchored on 3D GCF electrodes by using a facile chemical bath deposition (CBD) method. The wide porous structure with high specific surface area (520 m(2) g(-1)) access offered by the interconnected 3D GCF along with Co(OH)(2) NRs morphology, displays ultrahigh specific capacitance, specific energy and power. The Co(OH)(2)/3D GCF electrode exhibits maximum specific capacitance about similar to 1235 F g(-1) at similar to 1 Ag-1 charge-discharge current density, in 1 M aqueous KOH solution. These results endorse potential applicability of Co(OH)(2)/3D GCF electrode in supercapacitors and signifies that, the porous GCF is a proficient 3D freestanding framework for loading pseudocapacitive nanostructured materials.}, doi = {10.1038/srep35490}, author = {Patil, Umakant M. and Ghorpade, Ravindra V. and Nam, Min Sik and Nalawade, Archana C. and Lee, Sangrae and Han, Haksoo and Jun, Seong Chan} } @article { ISI:000369508800059, title = {Promotional effect of Fe on the performance of supported Cu catalyst for ambient pressure hydrogenation of furfural}, journal = {RSC Advances}, volume = {6}, number = {5}, year = {2016}, month = {DEC}, pages = {3888-3898}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A noble-metal free FeCu based bimetallic catalyst system prepared by facile co-impregnation method was found to be highly admirable for vapour phase selective hydrogenation of furfural to furfuryl alcohol at ambient pressure. Monometallic Cu/gamma-Al2O3, Fe/gamma-Al2O3 and bimetallic FeCu/gamma-Al2O3 catalysts with different Fe loadings were prepared. Structural and morphological features of the catalysts were thoroughly investigated by several physico-chemical characterization techniques. The influence of various reaction parameters, such as Fe loading, reaction temperature and flow of reactants was examined with respect to furfural conversion and furfuryl alcohol yield. The results clearly showed that an optimum amount of Fe is necessary to enhance the catalytic activity of monometallic Cu/gamma-Al2O3 for the selective hydrogenation of furfural. The catalyst FC-10 with 10 wt\% Fe exhibited excellent activity which led to high furfural conversion (\>93\%) and furfuryl alcohol selectivity (\>98\%) under mild reaction conditions. The higher activity of bimetallic FeCu/gamma-Al2O3 compared to monometallic Cu/gamma-Al2O3 is ascribed to the formation of FeCu bimetallic particles and the existence of oxygen vacancies in the Fe oxide system. The superior activity after Fe loading on the Cu-based catalyst was attributed to the synergy between Cu and Fe. A plausible mechanism is proposed to explain the promoting effect of Fe, which involves synergism between Fe sites with strong oxophilic nature and Cu sites with a high ability for hydrogen activation. Based on the activity results, prolonged catalytic activity and spent catalyst analysis, the developed FeCu/gamma-Al2O3 catalyst is inexpensive, eco-benign and robust, which makes it a promising candidate for the efficient conversion of biomass-derived substrates to fine chemicals and drop-in biofuels.

}, issn = {2046-2069}, doi = {10.1039/c5ra24742j}, author = {Manikandan, Marimuthu and Venugopal, Ashok Kumar and Nagpure, Atul S. and Chilukuri, Satyanarayana V. and Raja, Thirumalaiswamy} } @article {42420, title = {Recent advances in N-heterocyclic carbene (NHC)-catalysed benzoin reactions (vol 12, pg 444, 2016)}, journal = {Beilstein Journal of Organic Chemistry}, volume = {12}, year = {2016}, month = {OCT}, pages = {2124-2124}, keywords = {acyloin reaction; benzoin reaction; N-heterocyclic carbenes; organocatalysis; umpolung}, doi = {10.3762/bjoc.12.201}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article { ISI:000371566100001, title = {Recent advances in N-heterocyclic carbene (NHC)-catalysed benzoin reactions}, journal = {Beilstein Journal of Organic Chemistry}, volume = {12}, year = {2016}, month = {MAR}, pages = {444-461}, publisher = {BEILSTEIN-INSTITUT}, address = {TRAKEHNER STRASSE 7-9, FRANKFURT AM MAIN, 60487, GERMANY}, abstract = {

N-Heterocyclic carbenes (NHCs) have emerged as a powerful class of organocatalysts that mediate a variety of organic transformations. The Benzoin reaction constitutes one of the earliest known carbon-carbon bond-forming reactions catalysed by NHCs. The rapid growth of NHC catalysis in general has resulted in the development of a variety of benzoin and benzoin-type reactions. An overview of such NHC-catalysed benzoin reactions is presented.

}, keywords = {acyloin reaction, benzoin reaction, N-heterocyclic carbenes, organocatalysis, umpolung}, issn = {1860-5397}, doi = {10.3762/bjoc.12.47}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article { ISI:000377497000004, title = {Relativistic coupled-cluster study of RaF as a candidate for the parity- and time-reversal-violating interaction}, journal = {Physical Review A}, volume = {93}, number = {6}, year = {2016}, month = {JUN}, pages = {062506}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We have employed both the Z-vector method and the expectation-value approach in the relativistic coupled-cluster framework to calculate the scalar-pseudoscalar (S-PS) P, T-odd interaction constant W-s and the effective electric field E-eff experienced by the unpaired electron in the ground electronic state of RaF. Further, the magnetic hyperfine structure constants of Ra-223 in RaF and Ra-223(+) are also calculated and compared with the experimental values wherever available to judge the extent of the accuracy obtained with the employed methods. The outcome of our study reveals that the Z-vector method is superior to the expectation-value approach in terms of accuracy obtained for the calculation of ground-state property. The Z-vector calculation shows that RaF has a high Eeff (52.5 GV/cm) and W-s (141.2 kHz), which makes it a potential candidate for the electric dipole moment of the electron (eEDM) experiment. An estimation of uncertainty associated with our final results is made, and it is found that it lies below 10\%.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.93.062506}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {42619, title = {Relativistic equation-of-motion coupled-cluster method for the electron attachment problem}, journal = {Computational and Theoretical Chemistry}, volume = {1076}, year = {2016}, month = {JAN}, pages = {94-100}, abstract = {

The article considers the successful implementation of relativistic equation-of-motion coupled cluster method for the electron attachment problem (EA-EOMCC) at the level of single- and double- excitation approximation. The implemented relativistic EA-EOMCC method is employed to calculate ionization potential values of alkali metal atoms (Li, Na, K, Rb, Cs, Fr) and the vertical electron affinity values of LiX (X = H, F, Cl, Br), NaY (Y = H, F, Cl) starting from their closed-shell configuration. Both four component and exact two-component calculations are done for all the opted systems. Further, we have shown the effect of spin-orbit interaction considering the atomic systems. The results of our atomic calculations are compared with the values from the NIST database and the results are found to be very accurate (\<1\%). (C) 2015 Elsevier B.V. All rights reserved.

}, doi = {10.1016/j.comptc.2015.12.015}, author = {Pathak, Himadri and Sasmal, Sudip and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {45870, title = {Relativistic equation-of-motion coupled-cluster method using open-shell reference wavefunction: application to ionization potential}, journal = {Journal of Chemical Physics}, volume = {145}, year = {2016}, month = {AUG}, type = {Article}, chapter = {074110}, abstract = {The open-shell reference relativistic equation-of-motion coupled-cluster method within its four-component description is successfully implemented with the consideration of single- and double- excitation approximations using the Dirac-Coulomb Hamiltonian. At the first attempt, the implemented method is employed to calculate ionization potential value of heavy atomic (Ag, Cs, Au, Fr, and Lr) and molecular (HgH and PbF) systems, where the effect of relativity does really matter to obtain highly accurate results. Not only the relativistic effect but also the effect of electron correlation is crucial in these heavy atomic and molecular systems. To justify the fact, we have taken two further approximations in the four-component relativistic equation-of-motion framework to quantify how the effect of electron correlation plays a role in the calculated values at different levels of theory. All these calculated results are compared with the available experimental data as well as with other theoretically calculated values to judge the extent of accuracy obtained in our calculations. }, doi = {10.1063/1.4960954}, author = {Pathak, H. and Sasmal, S. and Nayak, M. K. and Vaval, N. and Pal, S.} } @inbook {45872, title = {Remediation of domestic and industrial effluents using algae}, booktitle = {Algal Biorefinery: An Integrated Approach}, year = {2016}, pages = {401-437}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {In the environment, microbial activity is considered as one of the most important mechanisms for the abatement of water-borne pollutants. In the natural and anthropogenic environment the wide range of contaminates are not eliminated by single specie but by the complex interaction of a mixed microbial population performing complementary reactions. This principle is very much applicable for the treatment of the industrial and domestic wastewater, which has excess of nitrogenous compounds (N) and phosphates (P). N and P along with various organic pollutants, if not properly treated, would create a devastating impact on natural aquatic ecosystems. Among the many other disturbing impacts, most prevalent is the phenomenon of eutrophication, which is the accumulation of high levels of organic matter and the decomposing organisms, which deplete the oxygen in water, and causing the death of other organisms, such as fish. The excess nutrients in the aquatic ecosystem support the growth of various phytoplanktons. It not only spoils the water quality but also adversely affects the whole aquatic ecosystem. This chapter will address the possibility of effectively utilizing a natural microbial flora/consortium, enriched with the rapidly growing algae for the remediation of polluted water bodies.}, issn = {978-331922813-6;978-331922812-9}, doi = {10.1007/978-3-319-22813-6_18}, author = {Nene, S. N. and Gera, G. and Yewalkar, S. N.} } @article { ISI:000373762400005, title = {Reporter nanoparticle that monitors its anticancer efficacy in real time}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {113}, number = {15}, year = {2016}, month = {APR}, pages = {E2104-E2113}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

The ability to monitor the efficacy of an anticancer treatment in real time can have a critical effect on the outcome. Currently, clinical readouts of efficacy rely on indirect or anatomic measurements, which occur over prolonged time scales postchemotherapy or postimmunotherapy and may not be concordant with the actual effect. Here we describe the biology-inspired engineering of a simple 2-in-1 reporter nanoparticle that not only delivers a cytotoxic or an immunotherapy payload to the tumor but also reports back on the efficacy in real time. The reporter nanoparticles are engineered from a novel two-staged stimuli-responsive polymeric material with an optimal ratio of an enzyme-cleavable drug or immunotherapy (effector elements) and a drug function-activatable reporter element. The spatiotemporally constrained delivery of the effector and the reporter elements in a single nanoparticle produces maximum signal enhancement due to the availability of the reporter element in the same cell as the drug, thereby effectively capturing the temporal apoptosis process. Using chemotherapy-sensitive and chemotherapy-resistant tumors in vivo, we show that the reporter nanoparticles can provide a real-time noninvasive readout of tumor response to chemotherapy. The reporter nanoparticle can also monitor the efficacy of immune checkpoint inhibition in melanoma. The self-reporting capability, for the first time to our knowledge, captures an anticancer nanoparticle in action in vivo.

}, keywords = {chemotherapy, immunotherapy, monitoring, nanoparticle, reporter}, issn = {0027-8424}, doi = {10.1073/pnas.1603455113}, author = {Kulkarni, Ashish and Rao, Poornima and Natarajan, Siva and Goldman, Aaron and Sabbisetti, Venkata S. and Khater, Yashika and Korimerla, Navya and Chandrasekar, Vineethkrishna and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article {42621, title = {Search for parity and time reversal violating effects in HgH: relativistic coupled-cluster study}, journal = {Journal of Chemical Physics}, volume = {144}, year = {2016}, month = {MAR}, pages = {Article No. 124307}, abstract = {

The high effective electric field (E-eff) experienced by the unpaired electron in an atom or a molecule is one of the key ingredients in the success of electron electric dipole moment (eEDM) experiment and its precise calculation requires a very accurate theory. We, therefore, employed the Z-vector method in the relativistic coupled-cluster framework and found that HgH has a very large E-eff value (123.2 GV/cm) which makes it a potential candidate for the next generation eEDM experiment. Our study also reveals that it has a large scalar-pseudoscalar (S-PS) P, T-violating interaction constant, W-s = 284.2 kHz. To judge the accuracy of the obtained results, we have calculated parallel and perpendicular magnetic hyperfine structure (HFS) constants and compared with the available experimental values. The results of our calculation are found to be in nice agreement with the experimental values. Therefore, by looking at the HFS results, we can say that both E-eff and W-s values are also very accurate. Further, We have derived the relationship between these quantities and the ratio which will help to get model independent value of eEDM and S-PS interaction constant. (C) 2016 AIP Publishing LLC.

}, doi = {10.1063/1.4944673}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @inbook {43302, title = {Self-assembly of biohybrid polymers}, booktitle = {Macromolecular self-assembly}, year = {2016}, pages = {193-229}, publisher = {John Wiley \& Sons, Inc.}, organization = {John Wiley \& Sons, Inc.}, chapter = {7}, address = {New York :}, abstract = {

Self-assembly is considered to be the process through which building blocks spontaneously organize into well-defined frequently functional structures. The tailoring of properties of such structures has drawn attention in various fields, in particular, in enzymatic cascade reactions, drug delivery, amphiphilic copolymer nanocontainers, and nanoreactors. Polymer-DNA hybrid self-assemblies, in addition to responsiveness to ionic strength, are sensitive to hybridization, which renders the establishment of a theoretical framework challenging when both specific hydrogen bonding between complementary sequences and association are to be taken into consideration. Numerous various highly characterized self-assemblies are recognized to organize through nucleation dependent polymerization, including microtubule formation, sickle-cell fibril formation, flagellum assembly, among others. Interpolyelectrolyte complexes (IPECs) have attracted attention due to the large number of emerging and potential applications. Environmental factors such as the medium also play a role in the complex formation process, especially pH and ionic strength.

}, doi = {10.1002/9781118887813.ch7 }, author = {Kedracki, Dawid and Abraham, Jancy Nixon and Prado, Enora and Nardin, Corinne} } @article {45642, title = {Silk fibroin-sophorolipid gelation: deciphering the underlying mechanism}, journal = {Biomacromolecules}, volume = {17}, year = {2016}, month = {OCT}, pages = {3318-3327}, type = {Article}, abstract = {

Silk fibroin (SF) protein, produced by silkworm Bombyx mori, is a promising biomaterial, while sophorolipid (SL) is an amphiphilic functional biosurfactant synthesized by nonpathogenic yeast Candida bombicola. SL is a mixture of two forms, acidic (ASL) and lactonic (LSL), which when added to SF results in accelerated gelation of silk fibroin. LSL is known to have multiple biological functionalities and hence hydrogels of these green molecules have promising applications in the biomedical sector. In this work, SANS, NMR, and rheology are employed to examine the assembling properties of individual and mixed SLs and their interactions with SF to understand the mechanism that leads to rapid gelation. SANS and NMR studies show that ASL assembles to form charged micelles, while LSL forms micellar assemblies and aggregates of a mass fractal nature. ASL and LSL together form larger mixed micelles, all of which interact differently with SF. It is shown that preferential binding of LSL to SF causes rapid unfolding of the SF chain leading to the formation of intermolecular beta sheets, which trigger fast gelation. Based on the observations, a mechanism for gelation of SF in the presence of different sophorolipids is proposed.

}, issn = {1525-7797}, doi = {10.1021/acs.biomac.6b01069}, author = {Dubey, Parul and Kumar, Sugam and Aswal, Vinod K. and Ravindranathan, Sapna and Rajamohanan, Pattuparambil R. and Prabhune, Asmita and Nisal, Anuya} } @article {42669, title = {Silver nanoparticles: a new perspective in endodontic therapy}, journal = {OAB Journal}, volume = {7}, year = {2016}, month = {JUN}, pages = { 77-81}, abstract = {

Silver has been in use in medicine since time immemorial because of its antimicrobial properties. But due to the emergence of antibiotics the use of silver has been declined. Several pathogenic bacteria have developed resistance against various antibiotics. This has led to reemergence of silver. Recently nano science and nanotechnology are gaining tremendous popularity. The small size of nanoparticles provides larger surface area and hence increases the effectiveness of nanoparticles. Silver nanoparticles are used in medical and dental applications ranging from silver based wound dressings, silver coated medicinal devices like catheters, endotrachial tubes, bone cements, in gels, lotions, cosmetics, in dental restorative materials, endodontic cements, dental implants caries inhibitory agents, and in prosthesis. The purpose of this article is to discuss briefly the potential role of silver nano particles in endodontic therapy.

}, author = {Jadhav, Rajashree and Bhide, Shrinivas and Bhagavatula L. V. Prasad and Kunchiraman, Bipinraj and Shimpi, Jayesh and Nandhini, Usha} } @article { ISI:000381593700007, title = {Spectroscopy and catalytic activity study of gold supported on barium titanate nanotubes for styrene epoxidation}, journal = {Applied Catalysis A-General}, volume = {523}, year = {2016}, month = {AUG}, pages = {61-72}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Gold (0.5-5 wt.\%) supported on barium titanate nanotubes (Au/BaTNT) were prepared, characterized and for the first time, investigated as catalysts for selective oxidation of styrene with oxygen (O-2 or H-2 + O-2) and peroxides (H2O2 or TBHP). Conversion of styrene enhanced when H-2 was co-added to O-2 in the reactions. Au/BaTNT activated O-2 and H-2 and produced H2O2 in situ for use in oxidations. Peroxides were found better oxidants than O-2. At optimized conditions, styrene oxide selectivity of 80.1 wt.\% at styrene conversion of 60.5 wt.\% was achieved over Au(1 wt.\%)/BaTNT using TBHP. Au particles (5.0-7.4 nm) were dispersed and decorated on the walls of BaTNT. They exhibited superior performance to the known Au catalysts in styrene oxidation. Reactive oxygen species formed during oxidation reactions were followed with in situ spectral characterizations (diffuse reflectance UV-vis and FT -Raman). Au/BaTNT was reusable in four recycles with little loss in catalytic activity. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Au Nanoparticles, reactive oxygen species, spectroscopy, Styrene Oxidation, Titanate nanotubes}, issn = {0926-860X}, doi = {10.1016/j.apcata.2016.05.014}, author = {Nepak, Devadutta and Srinivas, Darbha} } @article {43001, title = {Stereoselective quenching of cedryl carbocation in epicedrol biosynthesis}, journal = {Tetrahedron Letters}, volume = {57}, year = {2016}, month = {MAR}, pages = {1161-1164}, abstract = {

Epicedrol synthase catalyzes the cyclization of achiral diphosphate substrate, (E,E)-farnesyldiphosphate (FPP) into epicedrol. GC-MS analysis of assay extracts obtained by incubating FPP with epicedrol synthase in 21.6 at \% H2(18)O buffer showed the molecular ion of 224 for epicedrol. The labeled oxygen study presented here unambiguously demonstrates that the hydroxyl group of the epicedrol synthase enzymatic product, epicedrol, is derived from a water molecule, not from the phosphate moiety of the FPP. (C) 2016 Elsevier Ltd. All rights reserved.

}, doi = {10.1016/j.tetlet.2016.01.109}, author = {Shinde, Sandip S. and Navale, Govinda R. and Said, Madhukar S. and Thulasiram, Hirekodathakallu V.} } @article { ISI:000372766400005, title = {Surface tailored PS/TiO2 composite nanofiber membrane for copper removal from water}, journal = {Journal of Colloid and Interface Science}, volume = {469}, year = {2016}, month = {MAY}, pages = {31-37}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Polystyrene (PS)/TiO2 composite nanofiber membranes have been fabricated by electrospinning process for Cu2+ ions removal from water. The surface properties of the polystyrene nanofibers were modulated by introducing TiO2 nanoparticles. The contact angle of the PS nanofiber membrane was found to be decreased with increasing concentration of TiO2, depicted enhanced hydrophilicity. These membranes were highly effective in adsorbing Cu2+ ions from water. The adsorption capacity of these membranes was found to be 522 mg/g, which is significantly higher than the results reported by other researchers. This was attributed to enhanced hydrophilicity of the PS/TiO2 composite nanofiber membranes and effective adsorption property of TiO2 nanoparticles. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {electrospinning, Metal ion adsorption, Nanofiber, TiO2, Water treatment/purification}, issn = {0021-9797}, doi = {10.1016/j.jcis.2016.01.054}, author = {Wanjale, Santosh and Birajdar, Mallinath S. and Jog, Jyoti Prakash and Neppalli, Ramesh and Causin, Valerio and Karger-Kocsis, Jozsef and Lee, Jonghwi and Panzade, Prasad} } @article {43058, title = {Sustainable catalytic process for synthesis of triethyl citrate plasticizer over phosphonated USY zeolite}, journal = {Bulletin of Chemical Reaction Engineering and Catalysis}, volume = {11}, year = {2016}, month = {OCT}, pages = {292-298}, abstract = {

Fruits wastage is harmful to health and environment concerning spreading diseases and soil pollution, respectively. To avoid this issue, use of citrus fruit waste for the production of citric acid (CA) is one of viable mean to obtain value added chemicals. Moreover, synthesis of triethyl citrate (TEC), a non-toxic plasticizer by esterification of CA with ethanol over heterogeneous catalyst would be renewable and sustainable catalytic process. In this context, parent Ultrastable Y (USY) and different percentage phosphonated USY (P-USY) zeolites were used for the synthesis of TEC in a closed batch reactor, for the first time. The synthesized catalysts were characterized by N2-adsorption desorption isotherm, powder X-ray diffraction (XRD) and NH3 temperature programmed desorption (TPD. Effect of reaction conditions, such as the molar ratio of ethanol to CA (5:1 - 20:1), the catalyst to CA ratio (0.05-0.25) and reaction temperature (363-403 K), were studied in view to maximizing CA conversion and TEC yield. Phosphonated USY catalysts were found to be superior in activity (CA conversion and TEC yield) than parent USY, which is attributed to the increased in total acidity with phosphonation. Among the studied catalysts, the P2USY (2\% phosphorous loaded on USY) was found to be an optimum catalyst with 99\% CA conversion and 82\% TEC yield, which is higher than the reported values. This study opens new avenues of research demonstrating principles of green chemistry such as easy separable and reusable catalyst, non-toxic product, bio-renewable synthetic route, milder operating parameters and waste minimization.

}, doi = {10.9767/bcrec.11.3.569.292-298}, author = {Nandiwaleand, Kakasaheb Y. and Bokade, Vijay V.} } @article { ISI:000380574100052, title = {Synthesis and antitubercular activity of new 1,3,4-oxadiazoles bearing pyridyl and thiazolyl scaffolds}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {15}, year = {2016}, month = {AUG}, pages = {3646-3651}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In search of more potent and safe new antitubercular agents, here new 2-pyridinyl substituted thiazolyl-5-aryl-1,3,4-oxadiazoles (6a-o), have been designed and synthesized using thionicotinamide as a starting, following novel multistep synthetic route. An intermediate, pyridinyl substituted thiazolyl acid hydrazide (4) when condensed with benzoic acids/nicotinic acids (5a-o) in the presence of silica supported POCl3 yielded better to excellent yields of the title compounds. All the synthesized compounds (6a-o) and intermediate acid hydrazide (4) have been screened for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB) and Mycobacterium bovis BCG. Amongst them, 6f, 6j, 6l and 6o have revealed promising activity against M. bovis BCG at concentrations less than 3 mu g/mL. These compounds have shown low cytotoxicity (CC50: \> 100 mu g/mL) towards four human cancer cell lines. Molecular docking study has also been performed against mycobacterial enoyl reductase (InhA) enzyme to gain an insight into the binding modes of these molecules and recorded good binding affinity. The ADME properties the title products have also been analyzed. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {1, 3, 4-Oxadiazole, Antitubercular activity, Cytotoxicity, Molecular docking, Pyridine, Thiazole}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.05.093}, author = {Dhumal, Sambhaji T. and Deshmukh, Amarsinh R. and Bhosle, Manisha R. and Khedkar, Vijay M. and Nawale, Laxman U. and Sarkar, Dhiman and Mane, Ramrao A.} } @article { ISI:000381452800005, title = {Synthesis and antitubercular activity of new benzo[b]thiophenes}, journal = {ACS Medicinal Chemistry Letters}, volume = {7}, number = {8}, year = {2016}, month = {AUG}, pages = {751-756}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In vitro and ex vivo efficacies of four series of benzo[b]thiophene-2-carboxylic acid derivatives were studied against Mycobacterium tuberculosis H37Ra (MTB). Benzo[b]thiophenes were also tested in vitro against multidrug resistant Mycobacterium tuberculosis H37Ra (MDR-MTB), and 7b was found to be highly active against A- and DMDR-MTB/MTB (MIC ranges 2.73-22.86 mu g/mL). The activity of all benzo[b]-thiophenes against M. bovis BCG (BCG) was also assessed grown under aerobic and under conditions of oxygen depletion. Compounds 8c and 8g showed significant activity with MICs of 0.60 and 0.61 mu g/mL against dormant BCG. The low cytotoxicity and high selectivity index data against human cancer cell lines, HeLa, Panc-1, and THP-1 indicate the potential importance of the development of benzo[b]thiophene-based 1,3-diketones and flavones as lead candidates to treat mycobacterial infections. Molecular docking studies into the active site of DprE1 (Decaprenylphosphoryl-beta-n-ribose-2{\textquoteright}-epimerase) enzyme revealed a similar binding mode to native ligand in the crystal structure thereby helping to understand the ligand protein interactions and establish a structural basis for inhibition of MTB. In summary, its good activity in in vitro and ex vivo model, as well as its activity against multidrug-resistant M. tuberculosis H37Ra in a potentially latent state, makes 7b an attractive drug candidate for the therapy of tuberculosis.

}, keywords = {Benzo[b]thiophene, Cytotoxicity, M. Bovis BCG, MDR-MTB, Molecular docking}, issn = {1948-5875}, doi = {10.1021/acsmedchemlett.6b00077}, author = {Mahajan, Pravin S. and Nikam, Mukesh D. and Nawale, Laxman U. and Khedkar, Vijay M. and Sarkar, Dhiman and Gill, Charansingh H.} } @article { ISI:000370693900022, title = {Synthesis and evaluation of thieno[2,3-d]pyrimidin-4(3H)-ones as potential antitubercular agents (vol 6, pg 2209, 2015)}, journal = {Medchemcomm}, volume = {7}, number = {2}, year = {2016}, month = {DEC}, pages = {379}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, issn = {2040-2503}, doi = {10.1039/c5md90062j}, author = {Borate, Hanumant B. and Annadate, Ritesh A. and Vagh, Sandip S. and Pisal, Mahesh M. and Deokate, Sagar B. and Arkile, Manisha A. and Jadhav, Nandadeep J. and Nawale, Laxman U. and Sarkar, Dhiman} } @article { ISI:000371304100018, title = {Synthesis, biological evaluation and molecular docking of novel coumarin incorporated triazoles as antitubercular, antioxidant and antimicrobial agents}, journal = {Medicinal Chemistry Research}, volume = {25}, number = {4}, year = {2016}, month = {APR}, pages = {790-804}, publisher = {SPRINGER BIRKHAUSER}, address = {233 SPRING STREET, 6TH FLOOR, NEW YORK, NY 10013 USA}, abstract = {

A series of new coumarin-based 1,2,3-triazole derivatives were designed, synthesized and evaluated for their antitubercular activity in vitro against Mycobacterium tuberculosis H37Ra, antioxidant activity by DPPH radical scavenging assay, antimicrobial activity in vitro against three gram-positive bacteria (Staphylococcus aureus, Micrococcus luteus and Bacillus cereus) and three gram-negative bacteria (Escherichia coli, Pseudomonas fluorescens and Flavobacterium devorans as well as three fungi (Aspergillus niger, Penicillium chrysogenum and Curvularia lunata). The bioactive assay showed that some synthesized coumarin triazoles displayed comparable or even better antitubercular, antioxidant, antibacterial and antifungal efficacy in comparison with reference drugs. Furthermore, docking study has been performed against DprE1 enzyme of M. tuberculosis that showed good binding interactions. Moreover, the synthesized compounds were also analyzed for ADME properties and showed potential to build up as good oral drug candidates. New coumarin-based 1,2,3-triazole derivatives were designed, synthesized and evaluated for their antitubercular, antioxidant, antibacterial and antifungal activity. Some of the coumarin-based triazole derivatives displayed comparable or even better efficacy in comparison with reference drugs. Molecular docking study has been performed against DprE1 enzyme of Mycobacterium tuberculosis showed good binding interactions. [GRAPHICS] .

}, keywords = {1, 2, 3-Triazole, ADME prediction, Antimicrobial, Antioxidant, Antitubercular, Click chemistry, Docking study}, issn = {1054-2523}, doi = {10.1007/s00044-016-1519-9}, author = {Shaikh, Mubarak H. and Subhedar, Dnyaneshwar D. and Shingate, Bapurao B. and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Khedkar, Vijay M. and Nawale, Laxman and Sarkar, Dhiman and Navale, Govinda R. and Shinde, Sandip S.} } @article { ISI:000372031300074, title = {Synthesis, biological evaluation and molecular docking studies of N-acylheteroaryl hydrazone derivatives as antioxidant and anti-inflammatory agents}, journal = {Research on Chemical Intermediates}, volume = {42}, number = {3}, year = {2016}, month = {MAR}, pages = {2707-2729}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

In search of new therapeutics with greater potency, three new series of 3-methyl-1-phenyl-1H-thieno[2,3-c]pyrazole-5-carbohydrazide derivatives have been synthesized and evaluated for their in vitro antioxidant and anti-inflammatory activities. The hydrazones bearing a core pyrazole, chromone and tetrazolo[1,5-a]quinoline scaffold showed promising activities. Interestingly, compounds 3a (EC50 = 06.00 +/- A 2.36) and 5c (EC50 = 07.21 +/- A 0.67) showed the most potent antioxidant activity, while compounds 3a (EC50 = 10.25 +/- A 1.08), 7b (EC50 = 10.50 +/- A 0.99) and 7c (EC50 = 11.18 +/- A 0.15) showed significant anti-inflammatory activity. Furthermore, molecular docking studies also revealed a significant correlation between the binding score and biological activity for these compounds to describe the molecular basis for the structure activity relationship (SAR) results. As these compounds are good cyclooxygenase inhibitors, isoenzyme inhibitory potency studies are warranted.

}, keywords = {Anti-inflammatory, Antioxidant, Docking study, N-Acylhydrazones, Structure-activity relationship}, issn = {0922-6168}, doi = {10.1007/s11164-015-2176-1}, author = {Mahajan, Pravin S. and Nikam, Mukesh D. and Khedkar, Vijay M. and Jha, Prakash C. and Sarkar, Dhiman and Gill, Charansingh H.} } @article { ISI:000371344600027, title = {Synthesis, biological evaluation and molecular docking study of some novel indole and pyridine based 1,3,4-oxadiazole derivatives as potential antitubercular agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {7}, year = {2016}, month = {APR }, pages = {1776-1783}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A series of indole and pyridine based 1,3,4-oxadiazole derivatives 5a-t were synthesized and evaluated for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB) and Mycobacterium bovis BCG both in active and dormant state. Compounds 5b, 5e, 5g and 5q exhibited very good antitubercular activity. All the newly synthesized compounds 5a-t were further evaluated for antiproliferative activity against HeLa, A549 and PANC-1 cell lines using modified MTT assay and found to be noncytotoxic. On the basis of cytotoxicity and MIC values against Mycobacterium bovis BCG, selectivity index (SI) of most active compounds 5b, 5e, 5g and 5q was calculated (SI = GI(50)/MIC) in active and dormant state. Compounds 5b, 5e and 5g demonstrated SI values \>= 10 against all three cell lines and were found to safe for advance screening. Compounds 5a-t were further screened for their antibacterial activity against four bacteria strains to assess their selectivity towards MTB. In addition, the molecular docking studies revealed the binding modes of these compounds in active site of enoyl reductase (InhA), which in turn helped to establish a structural basis of inhibition of mycobacteria. The potency, low cytotoxicity and selectivity of these compounds make them valid lead compounds for further optimization. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {1, 3, 4-Oxadiazole, Antitubercular activity, Cytotoxicity, Indole, Molecular docking, Pyridine}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.02.043}, author = {Desai, N. C. and Somani, Hardik and Trivedi, Amit and Bhatt, Kandarp and Nawale, Laxman and Khedkar, Vijay M. and Jha, Prakash C. and Sarkar, Dhiman} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} } @article {45875, title = {Synthesis of fuel intermediates from HMF/fructose}, journal = {Catalysis Letters}, volume = {146}, year = {2016}, month = {OCT}, pages = {1984-1990}, type = {Article}, abstract = {Alkylation of toluene, anisole and mesitylene with HMF and fructose is reported using Glu{\textendash}Fe3O4{\textendash}SO3H solid acid catalyst. HMF was found to alkylate toluene, anisole and mesitylene in high yields and high selectivity under solvent free conditions. Polyalkylation and self etherification of HMF was not observed. The alkylated product on hydrodeoxygenation forms liquid alkanes of different chain lengths which have properties of transportation fuels or diesel fuels. The catalyst was easily recoverable and reusable minimum 5 times to achieve good yields and high selectivity of alkylated product.}, doi = {10.1007/s10562-016-1836-0}, author = {Nale, S. D. and Jadhav, V. H. and } } @article { ISI:000372156200013, title = {Synthesis of Sn-containing anatase (TiO2) by sol-gel method and their performance in catalytic water splitting under visible light as a function of tin content}, journal = {Materials Letters}, volume = {171}, year = {2016}, month = {MAY}, pages = {50-54}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Sol-gel route was employed to prepare a series of Sn-containing anatase with different molar (Ti/Sn) ratios ranging from 49 to 1. Samples were characterized by powder XRD, UV-vis, XPS, SEM, EDAX, low temperature N-2 sorption technique and Raman Spectroscopy. Except anatase phase, no other crystalline phase was observed when Ti/Sn molar ratio was varied from 49 to 9 and for Sn free sample. However, further decrease in the ratio lead to the appearance of additional SnO2 phase whose peak intensities were increased with the increase in the tin content. Irrespective of tin content, all samples showed red-shift in UV-vis spectra. Moreover, samples showed Raman shift to higher vibration side from 143 cm(-1) to 147 cm(-1) indicating the doping of Sn2+ into TiO2. By virtue of low band gap, anatase crystallite size and an absence of XRD visible SnO2, ST (19) has shown maximum photocatalytic activity upon 1 wt\% Pt loading. It has exhibited the highest rate (0.1264 mmole/g/h) for visible light induced hydrogen evolution by water splitting. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Semiconductors, Sn2+ doped titania, SnO2/TiO2, Sol-gel preparation, visible light, water splitting}, issn = {0167-577X}, doi = {10.1016/j.matlet.2016.02.055}, author = {Tangale, N. P. and Niphadkar, P. S. and Samuel, V. and Deshpande, Suvarna S. and Joshi, P. N. and Awate, S. V.} } @article {45876, title = {Synthesis of tyrosyl-DNA phosphodiesterase i inhibitors}, journal = {Tetrahedron Letters}, volume = {57}, year = {2016}, month = {JUN}, pages = {2652-2654}, type = {Article}, abstract = {The first report for the synthesis of tyrosyl-DNA phosphodiesterase I inhibitors 3,4-dimethoxyphenol-1-β-d-(6'-O-galloyl)glucopyranoside 3 and 3-(4-hydroxy-3-methoxyphenyl)propane-1,2-diol 2-β-d-(6'-O-galloyl) glucopyranoside 5 has been accomplished starting from readily available d-glucose as a starting material. An efficient and general approach has been reported for the synthesis of compounds 3 and 5 with an overall yield of 26\% and 27\%, respectively.}, doi = {10.1016/j.tetlet.2016.05.017}, author = {Nale, S. D. and Jadhav, V. H.} } @article { ISI:000380968200060, title = {Syringic acid: structural elucidation and co-crystallization}, journal = {Crystal Growth \& Design}, volume = {16}, number = {8}, year = {2016}, month = {AUG}, pages = {4679-4687}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Syringic acid (SYRA) is a potential antioxidant used in traditional Chinese medicine and is an emerging nutraceutical. Current reports claim its potential anti-angiogenic, anti-glycating, anti-hyperglycaemic, neuroprotective, and memory-enhancing properties in various animal models. To date, SYRA crystal structure has not been elucidated, and no crystal engineering studies have been reported. This study reports the crystal structure of SYRA for the first time along with its nicotinamide (SNCT-E) and urea (SU-EA-M) co-crystals. All forms were successfully characterized using single crystal X-ray diffraction (XRD), powder XRD, and differential scanning calorimetry. Single crystal analysis revealed that SYRA crystallized in the C2/c space group, whereas SNCT-E (2:1) and SU-EA-M (1:2) crystallized in the P21/n and Cmca space group, respectively. Novel co-crystals have shown improved solubility, modified dissolution profiles, and improved flow and compressibility. Cytotoxic effects were explored in DU145 prostate cancer cell lines for the first time, and significant enhancement in cytotoxicity by the co-crystals was observed compared to plain components. A two-fold increase in \% cytotoxicity of SNCT-E was observed when compared to the corresponding physical mixture. These studies shed light on potential utility of SYRA as a coformer for various pharmaceutical applications to design synergistic and organ-protective co-crystals.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.6b00750}, author = {Thipparaboina, Rajesh and Mittapalli, Sudhir and Thatikonda, Sowjanya and Nangia, Ashwini and Naidu, V. G. M. and Shastri, Nalini R.} } @article {43406, title = {Systematic evaluation of biophysical and functional characteristics of selenomethylene-locked nucleic acid-mediated inhibition of miR-21}, journal = {Biochemistry}, volume = {55}, year = {2016}, month = {DEC}, pages = {7023-7032}, abstract = {miRNAs constitute an important layer of gene regulation mediated by sequence-specific targeting of mRNAs. Aberrant expression of miRNAs contributes to a host of pathological states. Promoting cancer, miR-21 is upregulated in variety of cancers and promotes tumor progresion by suppressing a network of tumor suppressor genes. Here we describe a novel class of bicyclic RNA analogues, selenomethylene-locked nucleic acid (SeLNA), that display high affinity, improved metabolic stability, and increased potency for miR-21 inhibition. The thermal stability (T-m) for duplexes was increased significantly with incorporation of SeLNA monomers as compared to that of the unmodified DNA RNA hybrid. A comprehensive thermodynamic profile obtained by isothermal titration calorimetry revealed a favorable increase in the enthalpy of hybridization for SeLNA containing DNA and target RNA heteroduplexes. SeLNA modifications displayed remarkable binding affinity for miR-21 target RNA with a K-a of <= 1.05 x 10(8) M-1. We also observed enhanced serum stability for SeLNA RNA duplexes with a half-life of <= 36 h. These in vitro results were well correlated with the antisense activity in cancer cells imparting up to similar to 91\% inhibition of miR-21. The functional impact of SeLNA modifications on miR-21 inhibition was further gauged by investigating the migration and invasion characterisitics of cancer cells, which were drastically reduced to similar to 49 and similar to 55\%, respectively, with SeLNA having four such modifications. Our findings demonstrate SeLNA as a promising candidate for therapeutics for disease associated miRNAs.}, doi = {10.1021/acs.biochem.6b00895}, author = {Nahar, Smita and Singh, Amrita and Morihiro, Kunihiko and Moai, Yoshihiro and Kodama, Tetsuya and Obika, Satoshi and Maiti, Souvik} } @article {43577, title = {Thickness tunable transport in alloyed WSSe field effect transistors}, journal = {Applied Physics Letters}, volume = {109}, year = {2016}, month = {OCT}, pages = {Article Number: 142101}, abstract = {We report the field effect transistor characteristics of exfoliated transition metal dichalcogenide alloy tungsten sulphoselenide. WSSe is a layered material of strongly bonded S-W-Se atoms having weak interlayer van der Waals forces with a significant potential for spintronic and valleytronic applications due to its polar nature. The X-ray photoelectron spectroscopy measurements on crystals grown by the chemical vapor transport method indicate a stoichiometry of the form WSSe. We report flake thickness tunable transport mechanism with n-type behavior in thin flakes (<= 11 nm) and ambipolarity in thicker flakes. The devices with flake thicknesses of 2.4 nm-54.8nm exhibit a maximum electron mobility of similar to 50 cm(2)/V s along with an I-ON/I-OFF ratio > 10(6). The electron Schottky barrier height values of 35 meV and 52meV extracted from low temperature I-V measurements for 3.9 nm and 25.5 nm thick flakes, respectively, indicate that an increase in hole current with thickness is likely due to lowering of the bandgap through an increase in energy of the valence band maximum. Published by AIP Publishing.}, doi = {10.1063/1.4964289}, author = {Karande, Shruti D. and Kaushik, Naveen and Narang, Deepa S. and Late, Dattatray and Lodha, Saurabh} } @article {42630, title = {Tracing the architecture of caffeic acid phenethyl ester cocrystals: studies on crystal structure, solubility, and bioavailability implications}, journal = {Crystal Growth \& Design}, volume = {16}, year = {2016}, month = {OCT}, pages = {5710-5716}, abstract = {

Caffeic acid phenethyl ester (CAPE) is a polyphenolic active compound present in popular apiproduct, "propolis", obtained from beehives, Though it has broad therapeutic capability, the bioavailability of CAPE is limited due to poor solubility. In this study, we report novel cocrystals of CAPE engineered using coformers such as caffeine (CAP), isonicotinamide (INIC), and nicotinamide (NIC) with enhanced solubility and bioavailability of CAPE. The cocrystals were prepared by microwave-assisted cocrystallization and characterized using PXRD, DSC, and Raman spectroscopy. PXRD and DSC confirm the successful formation and phase purity of CAPE-CAF, CAPE-INIC, and CAPE-NIC cocrystals. Raman spectra of CAPE cocrystals complement these results in confirming the formation of novel crystalline phases. CAPE-NIC cocrystal was further subjected X-ray crystallography to understand its molecular arrangement and hydrogen bonding in the crystal structure. The CAPE-NIC cocrystal structure is found to be stabilized by a rare 1,2-benzenediol-amide heterosynthon. Cocrystallization of CAPE with NIC improved its aqueous solubility and pharmacokinetic profile, thereby demonstrating a 2.76-fold escalation in bioavailability.

}, doi = {10.1021/acs.cgd.6b00759}, author = {Ketkar, Sameer and Pagire, Sudhir K. and Goud, N. Rajesh and Mahadik, Kakasaheb R. and Nangia, Ashwini and Paradkar, Anant} } @article { ISI:000368530300005, title = {Two chitotriose-specific lectins show anti-angiogenesis, induces caspase-9-mediated apoptosis and early arrest of pancreatic tumor cell cycle}, journal = {Plos One}, volume = {11}, number = {1}, year = {2016}, month = {JAN}, pages = {Article Number: e0146110}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

The antiproliferative activity of two chito-specific agglutinins purified from Benincasa hispida (BhL) and Datura innoxia (DiL9) of different plant family origin was investigated on various cancer cell lines. Both lectins showed chitotriose specificity, by inhibiting lectin hemagglutinating activity. On further studies, it was revealed that these agglutinins caused remarkable concentration-dependent antiproliferative effect on human pancreatic cancerous cells but not on the normal human umbilical vein endothelial cells even at higher doses determined using MTT assay. The GI(50) values were approximately 8.4 mu g ml(-1) (0.247 mu M) and 142 mu g ml(-1) (14.8 mu M) for BhL and DiL9, respectively, against PANC-1 cells. The growth inhibitory effect of these lectins on pancreatic cancer cells were shown to be a consequence of lectin cell surface binding and triggering G(0)/G(1) arrest, mitochondrial membrane depolarization, sustained increase of the intracellular calcium release and the apoptotic signal is amplified by activation of caspases executing cell death. Interestingly, these lectins also showed anti-angiogenic activity by disrupting the endothelial tubulogenesis. Therefore, we report for the first time two chito-specific lectins specifically binding to tumor glycans; they can be considered to be a class of molecules with antitumor activity against pancreatic cancer cells mediated through caspase dependent mitochondrial apoptotic pathway.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0146110}, author = {Singh, Ruby and Nawale, Laxman and Sarkar, Dhiman and Suresh, C. G.} } @article { ISI:000380241600003, title = {Ultrasound- and molecular sieves-assisted synthesis, molecular docking and antifungal evaluation of 5-(4-(benzyloxy)-substituted phenyl)-3-((phenylamino)methyl)-1,3,4-oxadiazole-2(3H)-thiones}, journal = {Molecules}, volume = {21}, number = {5}, year = {2016}, month = {MAY}, pages = {484}, publisher = {MDPI AG}, address = {ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND}, abstract = {

A novel series of 5-(4-(benzyloxy) substituted phenyl)-3-((phenyl amino) methyl)-1,3,4-oxadiazole-2(3H)-thione Mannich bases 6a-o were synthesized in good yield from the key compound 5-(4-(benzyloxy) phenyl)-1,3,4-oxadiazole-2(3H)-thione by aminomethylation with paraformaldehyde and substituted amines using molecular sieves and sonication as green chemistry tools. The antifungal activity of the new products was evaluated against seven human pathogenic fungal strains, namely, Candida albicans ATCC 24433, Candida albicans ATCC 10231, Candida glabrata NCYC 388, Cryptococcus neoformans ATCC 34664, Cryptococcus neoformans PRL 518, Aspergillus fumigatus NCIM 902 and Aspergillus niger ATCC 10578. The synthesized compounds 6d, 6f, 6g, 6h and 6j exhibited promising antifungal activity against the tested fungal pathogens. In molecular docking studies, derivatives 6c, 6f and 6i showed good binding at the active site of C. albicans cytochrome P450 enzyme lanosterol 14 alpha-demethylase. The in vitro antifungal activity results and docking studies indicated that the synthesized compounds have potential antifungal activity and can be further optimized as privileged scaffolds to design and develop potent antifungal drugs.

}, keywords = {1, 3, 4-oxadiazoles, Antifungal activity, Mannich reaction, Molecular docking, Molecular sieves, Ultrasound}, issn = {1420-3049}, doi = {10.3390/molecules21050484}, author = {Nimbalkar, Urja D. and Tupe, Santosh G. and Seijas Vazquez, Julio A. and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Nikalje, Anna Pratima G.} } @article {42628, title = {Use of the term "crystal engineering" in the regulatory and patent literature of pharmaceutical solid forms. some comments}, journal = {Crystal Growth \& Design}, volume = {16}, year = {2016}, month = {AUG}, pages = {5585-5587}, doi = {10.1021/acs.cgd.6b01070}, author = {Desiraju, Gautam R. and Nangia, Ashwini} } @article { ISI:000371419200030, title = {Versatile Cu-II metal-organic framework exhibiting high gas storage capacity with selectivity for CO2: conversion of CO2 to cyclic carbonate and other catalytic abilities}, journal = {Chemistry-A European Journal}, volume = {22}, number = {10}, year = {2016}, month = {MAR}, pages = {3387-3396}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

A linear tetracarboxylic acid ligand, H4L, with a pendent amine moiety solvothermally forms two isostructural metal-organic frameworks (MOFs) L-M (M=Zn-II, Cu-II). Framework L-Cu can also be obtained from L-Zn by post- synthetic metathesis without losing crystallinity. Compared with L-Zn, the L-Cu framework exhibits high thermal stability and allows removal of guest solvent and metal-bound water molecules to afford the highly porous, L-Cu. At 77K, L-Cu absorbs 2.57wt\% of H-2 at 1bar, which increases significantly to 4.67wt\% at 36bar. The framework absorbs substantially high amounts of methane (238.38cm(3)g(-1), 17.03wt\%) at 303K and 60bar. The CH4 absorption at 303K gives a total volumetric capacity of 166cm(3)(STP)cm(-3) at 35bar (223.25cm(3)g(-1), 15.95wt\%). Interestingly, the NH2 groups in the linker, which decorate the channel surface, allow a remarkable 39.0wt\% of CO2 to be absorbed at 1bar and 273K, which comes within the dominion of the most famous MOFs for CO2 absorption. Also, L-Cu shows pronounced selectivity for CO2 absorption over CH4, N-2, and H-2 at 273K. The absorbed CO2 can be converted to value-added cyclic carbonates under relatively mild reaction conditions (20bar, 120 degrees C). Finally, L-Cu is found to be an excellent heterogeneous catalyst in regioselective 1,3-dipolar cycloaddition reactions (click reactions) and provides an efficient, economic route for the one-pot synthesis of structurally divergent propargylamines through three-component coupling of alkynes, amines, and aldehydes.

}, keywords = {click reactions, CO2 absorption, cyclic carbonate, heterogeneous catalysis, metal-organic frameworks}, issn = {0947-6539}, doi = {10.1002/chem.201504747}, author = {De, Dinesh and Pal, Tapan K. and Neogi, Subhadip and Senthilkumar, S. and Das, Debasree and Sen Gupta, Sayam and Bharadwaj, Parimal K.} } @article {43716, title = { Acemetacin cocrystal structures by powder X-ray diffraction}, journal = {Iucrj}, volume = {4}, year = {2017}, month = {MAY}, pages = {206-214}, type = {Article}, abstract = {Cocrystals of acemetacin drug (ACM) with nicotinamide (NAM), p-aminobenzoic acid (PABA), valerolactam (VLM) and 2-pyridone (2HP) were prepared by melt crystallization and their X-ray crystal structures determined by high-resolution powder X-ray diffraction. The powerful technique of structure determination from powder data (SDPD) provided details of molecular packing and hydrogen bonding in pharmaceutical cocrystals of acemetacin. ACM-NAM occurs in anhydrate and hydrate forms, whereas the other structures crystallized in a single crystalline form. The carboxylic acid group of ACM forms theacid-amide dimer three-point synthon R-3(2)(9) R-2(2)(8) R-3(2)(9) with three different syn amides (VLM, 2HP and caprolactam). The conformations of the ACM molecule observed in the crystal structures differ mainly in the mutual orientation of chlorobenzene fragment and the neighboring methyl group, being anti (type I) or syn (type II). ACM hydrate, ACM-NAM, ACM-NAM-hydrate and the piperazine salt of ACM exhibit the type I conformation, whereas ACM polymorphs and other cocrystals adopt the ACM type II conformation. Hydrogen-bond interactions in all the crystal structures were quantified by calculating their molecular electrostatic potential (MEP) surfaces. Hirshfeld surface analysis of the cocrystal surfaces shows that about 50\% of the contribution is due to a combination of strong and weak O center dot center dot center dot H, N center dot center dot center dot H, Cl center dot center dot center dot H and C center dot center dot center dot H interactions. The physicochemical properties of these cocrystals are under study.}, doi = {10.1107/S2052252517002305}, author = {Bolla, Geetha and Chernyshev, Vladimir and Nangia, Ashwini} } @article {45684, title = {All-solid-state-supercapacitor possessing a non-aqueous gel polymer electrolyte prepared using a UV-assisted in situ polymerization strategy}, journal = {Journal of Materials Chemistry A}, volume = {5}, year = {2017}, month = {MAY}, pages = { 8461-8476}, type = {Article}, abstract = {

In this work, we report the synthesis of a high ionic conducting and mechanically stable non-aqueous gel polymer electrolyte (GPE) in which a liquid electrolyte (LiClO4/propylene carbonate) is entrapped in a poly(2-hydroxy-3-phenoxy propyl acrylate) matrix by a UV assisted in situ polymerisation strategy. Unlike conventional dry and quasi-solid non-aqueous GPEs, our system (H-P-L-3M-80\%) shows an excellent ionic conductivity of 4.7 x 10(-3) S cm(-1), a value which is comparable to those of non-aqueous liquid electrolytes. The high mechanical stability of GPE arises due to the covalent cross-links present in the polymer matrix as well as the reversible non-covalent cross-links between the solvent and the polymer matrix through the Li+ cations. Subsequently, the GPE has been prepared in situ on the inner and the outer surface of the electrode material to fabricate a 2.0 V supercapacitor device with a high mass loading (3.8 mg cm(-2)) of the active material (YP-80F, a high surface area porous carbon). The device shows an equivalent series resistance (ESR) as low as 2.2 Omega, which is close to that of the device fabricated from the corresponding liquid electrolyte and is far better than those of the devices evolved from conventional GPEs and dry polymer electrolytes. The mass specific capacitance of 113 F g(-1) obtained at a current density of 2 mA cm(-2) shows 81\% retention even at a high current density of 20 mA cm(-2). The scalability of the strategy is demonstrated by fabricating a large area (area = 16 cm(2), loading = 4.0 mg cm(-2)) all-solid-state flexible-supercapacitor (H-P-L-3M-S-4.0) device which can be operated at a potential window of 2.5 V. The device was found to show a mass specific capacitance of 111 F g(-1) at a current density of 1 mA cm(-2) (0.25 A g(-1)), all the while, retaining a very low ESR of 2.2 Omega. The potential of the strategy to mimic the liquid-like electrode-electrolyte interface, augmented with the ability to tune further, opens up new horizons for energy storage devices.

}, doi = {10.1039/c7ta01514c}, author = {Vijayakumar, V. and Anothumakkool, B. and Torris, A. T. A. and Nair, S. B. and Badiger, M. V. and Kurungot, S.} } @article {45677, title = {Anti-proliferative effect of novel primary cetyl alcohol derived sophorolipids against human cervical cancer cells HeLa}, journal = {Plos One}, volume = {12 }, year = {2017}, month = {APR}, pages = {e0174241}, type = {Article}, abstract = {Sophorolipids (SLs) are glycolipid biosurfactants that have been shown to display anticancer activity. In the present study, we report anti-proliferative studies on purified forms of novel SLs synthesized using cetyl alcohol as the substrate (referred as SLCA) and their anticancer mechanism in human cervical cancer cells. Antiproliferative effect of column purified SLCA fractions (A, B, C, D, E and F) was examined in panel of human cancer cell lines as well as primary cells. Among these fractions, SLCA B and C significantly inhibited the survival of HeLa and HCT 116 cells without affecting the viability of normal human umbilical vein endothelial cells (HUVEC). The two fractions were identified as cetyl alcohol sophorolipids with non-hydroxylated tail differing in the degree of acetylation on sophorose head group. At an IC50 concentration SLCA B (16.32 mu g ml(-1)) and SLCA C (14.14 mu g ml(-1)) blocked the cell cycle progression of HeLa cells at G1/S phase in time-dependent manner. Moreover, SLCA B and SLCA C induced apoptosis in HeLa cells through an increase in intracellular Ca2+ leading to depolarization of mitochondrial membrane potential and increase in the caspase-3, -8 and -9 activity. All these findings suggest that these SLCAs could be explored for their chemopreventive potential in cervical cancer.}, doi = {10.1371/journal.pone.0174241}, author = {Nawale, Laxman and Dubey, Parul and Chaudhari, Bhushan and Sarkar, Dhiman and Prabhune, Asmita} } @article {43949, title = {Assessing therapeutic potential of molecules: molecular property diagnostic suite for tuberculosis}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {MAY}, pages = {515-531}, type = {Article}, abstract = {

Abstract: Molecular Property Diagnostic Suite (MPDS TB) is a web tool (http://mpds.osdd.net) designed to assist the in silico drug discovery attempts towards Mycobacterium tuberculosis (Mtb). MPDS TB tool has nine modules which are classified into data library (1{\textendash}3), data processing (4{\textendash}5) and data analysis (6{\textendash}9). Module 1 is a repository of literature and related information available on the Mtb. Module 2 deals with the protein target analysis of the chosen disease area. Module 3 is the compound library consisting of 110.31 million unique molecules generated from public domain databases and custom designed search tools. Module 4 contains tools for chemical file format conversions and 2D to 3D coordinate conversions. Module 5 helps in calculating the molecular descriptors. Module 6 specifically handles QSAR model development tools using descriptors generated in the Module 5. Module 7 integrates the AutoDock Vina algorithm for docking, while module 8 provides screening filters. Module 9 provides the necessary visualization tools for both small and large molecules. The workflow-based open source web portal, MPDS TB 1.0.1 can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. Graphical Abstract: SYNOPSIS: A web-based MPDS TB Galaxy tool is developed for assessing therapeutic potential of molecules. MPDS TB is categorized into Data Library, Data Processing and Data Analysis. It can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. [Figure not available: see fulltext.] {\textcopyright} 2017, Indian Academy of Sciences.

}, keywords = {chemical analysis, Chemoinformatics, computational chemistry, Diagnosis, Drug discovery portal, Information analysis, Libraries, Molecular graphics, Molecules, Neglected diseases, Open science, Portals, tuberculosis, Web-based technology, Websites}, issn = {0974-3626}, doi = {10.1007/s12039-017-1268-4}, author = {Gaur, A. S. and Bhardwaj, A. and Sharma, A. and John, L. and Vivek, M. R. and Tripathi, N. and Bharatam, P. V. and Kumar, R. and Janardhan, S. and Mori, A. and Banerji, A. and Lynn, A. M. and Hemrom, A. J. and Passi, A. and Singh, A. and Kumar, A. and Muvva, C. and Madhuri, C. and Choudhury, C. and Kumar, D. A. and Pandit, D. and Bharti, D. R. and Kumar, D. and Singam, E. A. and Raghava, G. P. and Sailaja, H. and Jangra, H. and Raithatha, K. and Tanneeru, K. and Chaudhary, K. and Karthikeyan, M. and Prasanthi, M. and Kumar, N. and Yedukondalu, N. and Rajput, N. K. and Saranya, P. S. and Narang, P. and Dutta, Prantu and Krishnan, R.} } @article {43771, title = {Band alignment and charge transfer pathway in three phase anatase-rutile-brookite TiO2 nanotubes: an efficient photocatalyst for water splitting}, journal = {Applied Catalysis B-Environmental}, volume = {128}, year = {2017}, month = {DEC}, pages = {9-19}, type = {Journal Article}, abstract = {The study reports electrochemical synthesis, phase evolution and hydrogen generation efficiency of anatase, anatase-rutile and anatase-rutile-brookite (ARB) TiO2 nanotubes for the first time. The SEM and TEM micrographs confirm the tubular morphology of the samples. The presence of anatase, rutile and brookite phases in a single nanotube is confirmed from high resolution TEM analysis. The water splitting efficiency of the three systems are studied under one sun illumination. It is observed that the anatase-rutile-brookite TiO2 nanotubes are highly efficient compared to anatase-rutile or anatase TiO2 nanotubes. The hydrogen generated by ARB composites, after four hours of one sun illumination, is found to be nearly twice that of anatase TiO2 nanotubes and 1.6 times that of anatase-rutile TiO2 nanotubes. The results suggest that the ARB in single nanotube having two junction interfaces, highly facilitate interparticle charge transfer compared to single junction anatase-rutile or bare anatase TiO2 nanotubes. From the deconvolution of PL spectra and the synchrotron radiation assisted valence band edge analysis, the band diagram for the anatase-rutile-brookite phase is constructed. The charge separation and its transfer pathway for efficient photo-assisted water splitting are delineated. This opens a new route for the simple synthesis and study of tri-phase TiO2 for efficient photocatalytic water splitting compared to the widely studied two phase TiO2. (C) 2017 Published by Elsevier B.V.}, keywords = {Anatase-Rutile-Brookite, Hydrogen generation, nanotubes, Photocatalysis, photoluminescence, Valence band edge}, doi = {10.1016/j.apcatb.2017.06.033}, author = {Preethi, L. K. and Mathews, Tom and Nand, Mangla and Jha, S. N. and Chinnakonda, Gopinath S. and Dash, Sitaram} } @article {43904, title = {Binding selectivity of vitamin K3 based chemosensors towards nickel(II) and copper(II) metal ions}, journal = {Journal of molecular Structure}, volume = {1143}, year = {2017}, month = {SEP}, chapter = {495-514}, abstract = {

The vitamin K3 derivatives 2-methyl-3-[(pyridin-2-ylmethyl)-amino]-1,4-naphthoquinone (M-1), 2-methyl-3-[(pyridin-2-ylethyl)-amino]-1,4-naphthoquinone (M-2), 2-methyl-3-((2-(thiophen-2-yl) methyl)amino)naphthalene-1,4-dione (M-3) and 2-methyl-3-((2-(thiophen-2-yl)ethyl)amino)naphthalene-1,4-dione (M-4) have been synthesized, characterized and studied for their chemosensor abilities towards transition metal ions. Crystal structures of M-1 to M-4 revealed a variety of N-H center dot center dot O, C-H center dot center dot center dot O, C-H center dot center dot center dot pi and pi center dot center dot center dot pi interactions. Minor variations in such interactions by chemical stimuli such as metal ions, results in change in color that can be visualized by naked eyes. It has been shown that electronic structure and H-1 NMR, vibrational as well as electronic spectra from the density functional theory agree well with the experiments. The metal ion binding in ethanol, ethanol-water and in mild base triethylamine brings forth recognizing ability of M-1 toward Ni2+ whereas M-2 exhibits large sensing ability for Cu2+ ion. Interestingly M-1 display varying metal ion binding specificity in different solvents with the association constant in ethanol being 11,786 M-1 for Ni2+ compared to 9462 M-1 for the Cu2+. A reversal in preferential binding of M-2 with the respective association constants being 4190 M-1 and 6370 M-1 is discernible. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Aminonaphthoquinone Molecular-structures, Anthraquinone, Aqueous-solution, Chemosensor, Crystal-structures, Cu(II), Derivatives, DFT, Fluorometric Chemosensors, hydrogen bonding, Naphthoquinone, pi-pi stacking, Recognition, sensors}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2017.04.094}, author = {Patil, Amit and Lande, Dipali N. and Nalkar, Archana and (Gejji, Shridhar P. and Chakrovorty, Debamitra and Gonnade, Rajesh and Moniz, Tania and Rangel, Maria and Pereira, Eulalia and Salunke-Gawali, Sunita} } @article {43978, title = {Biosurfactant surfactin as a kinetic promoter for methane hydrate formation}, journal = {Energy Procedia}, volume = {105}, year = {2017}, month = {MAY}, pages = {5011-5017}, type = {Article}, abstract = {In the present study, the effect of the biosurfactant Surfactin on methane hydrate formation kinetics was studied. Initially, several marine derived species were screened for the presence of Surfactin. The polymerase chain reaction technique was used as the preliminary screening step for Surfactin which was then followed up by a couple of different assays to provide conclusive evidence of the same. Based on these tests, the D-9 bacterial strain was identified as a producer of Surfactin. Once the presence of Surfactin had been proven, its effect on methane hydrate formation kinetics was investigated upon by carrying out hydrate formation experiments in a stirred tank reactor. The cell free supernatant containing Surfactin was itself used as the hydrate forming solution without any further processing. It was found that the presence of Surfactin in the system greatly enhances hydrate formation kinetics as compared to pure water. In fact the kinetics in presence of Surfactin also surpassed that obtained with 1 wt\% SDS, the most commonly used synthetic kinetic hydrate promoter. This basic study can pave the way for more sophisticated research on the use of biosurfactants as kinetic promoters with a view on rapid methane hydrate formation kinetics for applications such as methane separation, storage and transport.}, doi = {10.1016/j.egypro.2017.03.1050}, author = {Bhattacharjee, Gaurav and Barmecha, Vivek and Pradhan, Darshan and Naik, Rajesh and Zare, Kirti and Mawlankar, Rahul R. and Dastager, Syed Gulam and Kushwaha, Omkar Singh and Kumar, Rajnish} } @article {44093, title = {Camptothecin-producing endophytic bacteria from pyrenacantha volubilis hook. (Icacinaceae): a possible role of a plasmid in the production of camptothecin}, journal = {Phytomedicine}, volume = {36}, year = {2017}, month = {DEC}, pages = {160-167}, type = {Article}, abstract = {Background: Camptothecin (CPT), a quinoline alkaloid, is a potent inhibitor of eukaryotic topoisomerase I. Because of this property, several derivatives of CPT are used as chemotherapeutic agents. CPT is produced by several plant species belonging to the Asterid clade as well as by a number of endophytic fungal associates of these plants. In this study, we report the production of CPT by four bacterial endophytes and show the possible role of a plasmid in the biosynthesis of CPT. Methods: Endophytic bacteria were isolated from leaves, stems and fruits of Pyrenacantha volubilis Hook. (Icacinanceae). The bacterial isolates were purified and analyzed for production of CPT by ESI-MS/MS and NMR analysis. Bacterial identity was established based on the morphology and 16s rRNA sequence analysis. Crude extracts of the bacterial endophytes were evaluated for their cytotoxicity using colon cancer cell lines. The role of plasmid in the production of CPT was studied by purging the plasmid, using acriflavine, as well as reconstituting the bacteria with the plasmid. Results: Four bacterial isolates, Bacillus sp. (KP125955 and KP125956), Bacillus subtilis (KY741853) and Bacillus amyloliquefaciens (KY741854) were found to produce CPT in culture. Both based on ESI-MS/MS and NMR analysis, the identity of CPT was found to be similar to that produced by the host plant. The CPT was biologically active as evident by its cytotoxicity against colon cancer cell line. The production of CPT by the endophyte (Bacillus subtilis, KY741853) attenuated with sub-culture. A likely role of a plasmid in the production of CPT was established. A 5 kbp plasmid was recovered from the bacteria. Bacterial isolate cured of plasmid failed to produce CPT. Conclusion: Our study implies a possible role of a plasmid in the production of CPT by the endophytic bacteria and opens up further work to unravel the exact mechanisms that might be involved.}, doi = {10.1016/j.phymed.2017.09.019}, author = {Soujanya, K. N. and Siva, R. and Kumara, P. Mohana and Srimany, Amitava and Ravikanth, G. and Mulani, F. A. and Aarthy, T. and Thulasiram, H. V. and Santhoshkumar, T. R. and Nataraja, Karaba N. and Shaanker, R. Uma} } @article {43340, title = {Carboxymethyl cellulose-grafted mesoporous silica hybrid nanogels for enhanced cellular uptake and release of curcumin}, journal = {Gels}, volume = {3}, year = {2017}, month = {FEB}, abstract = {

Mesoporous silica nanoparticles (MSNs) with ordered pore structure have beensynthesized and used as carriers for the anticancer drug curcumin. MSNs were functionalizedwith amine groups and further attached with carboxymethyl cellulose (CMC) using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) coupling chemistry, which increased the hydrophilicityand biocompatibility of MSNs. The functionalized MSNs (MSN-NH2and MSN-CMC) werecharacterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM),Dynamic Light Scattering (DLS), N2adsorption, X-Ray Diffraction (XRD), Thermo GravimetricAnalysis (TGA) and Fourier Transform Infrared Spectroscopy (FT-IR). Thein vitrorelease of curcuminfrom the {\textendash}NH2and CMC functionalized MSNs (MSN-cur-NH2and MSN-cur-CMC) was performedin 0.5\% aqueous solution of sodium lauryl sulphate (SLS). The effect of CMC functionalization ofMSNs towards cellular uptake was studied in the human breast cancer cell line MDA-MB-231 andwas compared with that of MSN-NH2and free curcumin (cur). Both MSN-NH2and MSN-CMCshowed good biocompatibility with the breast cancer cell line. The MTT assay study revealedthat curcumin-loaded MSN-cur-CMC showed better uptake as compared to curcumin-loadedMSN-cur-NH2. Free curcumin was used as a control and was shown to have much less internalizationas compared to the curcumin-loaded functionalized MSNs due to poor bioavailability. Fluorescencemicroscopy was used to localize the fluorescent drug curcumin inside the cells. The workdemonstrates that CMC-functionalized MSNs can be used as potential carriers for loading and releaseof hydrophobic drugs that otherwise cannot be used effectively in their free form for cancer therapy.

}, doi = {10.3390/gels3010008}, author = {Tiwari, Neha and Nawale, Laxman U. and Sarkar, Dhiman and Badiger, Manohar V.} } @proceedings {44010, title = {CH3NH3PbI3 based solar cell: modified by antisolvent treatment}, volume = {1832}, year = {2017}, month = {MAY}, publisher = {American Institute of Physics Inc.}, chapter = {080065}, address = {KIIT University Bhubaneswar, Odisha; India.}, abstract = {

Solar cells based on new class of organic inorganic hybrid perovskite CH3NH3PbI3 were prepared by Ethyl acetate (EA); antisolvent treatment for the first time. This treatment results in new morphology for CH3NH3PbI3 thin film. FESEM image shows microrod type structures of CH3NH3PbI3 after EA antisolvent treatment. Energy band diagram was constructed using photoluminescence and photoemission studies. A better power conversion efficiency was achieved in EA treated film compare to without EA treated film.

}, keywords = {CH3NH3PbI3, Perovskite solar cell}, issn = {0094-243X}, doi = {10.1063/1.4980525}, author = {Nandi, P. and Giri, C. and Bansode, U. and Topwal, D.} } @article {44175, title = {Chitosan intercalated metal organic gel as a green precursor of fe entrenched and fe distributed N-doped mesoporous graphitic carbon for oxygen reduction reaction}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {SEP}, pages = {8762-8770}, type = {Article}, abstract = {

Herein, we present Metal-Organic Gel intercalated with chitosan, a {\textquoteleft}green{\textquoteright}{\textquoteright} precursor for the synthesis of intrinsic N-doped Fe entrenched (CHI-TMA-Fe-CW) and Fe distributed mesoporous graphitic carbon structures (CHI-TMA-Fe-CW-M1) with appreciable Oxygen Reduction Reaction (ORR) activity in alkaline medium. Modulation of the synthetic protocol as a function of reaction kinetics and gelation time while maintaining identical pyrolysis conditions (900 degrees C, flowing N-2 atmosphere) improves the microstructure, surface area and Fe distribution of the graphitic structures (CHI-TMA-Fe-CW-M1). CHI-TMA-Fe-CW has a Fe entrenched graphitic nanocapsule like morphology while Fe distributed mesoporous graphitic carbon sheets, with a specific surface area value of 565 m(2) g(-1) obtained by modulating the synthesis chemistry in CHI-TMA-Fe-CW-M1. The higher percentage of graphitic N in CHI-TMA-Fe-CW-M1 apparent from the XPS data validate that the modified synthetic method favours creation of more graphitic N sites contributing for better catalytic performance. CHI-TMA-Fe-CW-M1 catalyst exhibited comparable electrocatalytic activity with that of the commercially available Pt/C via an efficient four-electron-dominant ORR pathway with a positive onset potential value of 0.925 V vs RHE. Good durability of CHI-TMA-Fe-CW-M1 after 5000 cycles further confirm the prospects of MOG-chitosan and the feasibility to be used as a potential catalyst for ORR.

}, keywords = {electrocatalyst, fuel cell, Metal-Organic-Gel, oxygen reduction reaction}, issn = {2365-6549}, doi = {10.1002/slct.201701416}, author = {Shijina, Kottarathil and Illathvalappil, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Yamaguchi, Takeo and Anilkumar, Gopinathan M. and Hareesh, U. S. and Sailaja, G. S.} } @article {43502, title = {Cisplatin-induced self-assembly of graphene oxide sheets into spherical nanoparticles for damaging sub-cellular DNA}, journal = {Chemical Communications}, volume = {53}, year = {2017}, month = {JAN}, pages = {1409-1412}, abstract = {This report describes the hitherto unobserved cisplatin induced self-assembly of 2D-graphene oxide sheets into 3D-spherical nano-scale particles. These nanoparticles can encompass dual DNA damaging drugs simultaneously. A combination of confocal microscopy, gel electrophoresis and flow cytometry studies clearly demonstrated that these novel nanoparticles can internalize into cancer cells by endocytosis, localize into lysosomes, and damage DNA, leading to apoptosis. Cell viability assays indicated that these nanoparticles were more cytotoxic towards cancer cells compared to healthy cells.}, doi = {10.1039/c6cc09006k}, author = {Nandi, Aditi and Mallick, Abhik and More, Piyush and Sengupta, Poulomi and Ballav, Nirmalya and Basu, Sudipta} } @article {43781, title = {Click-chemistry-based multicomponent condensation approach for design and synthesis of spirochromene-tethered 1,2,3-triazoles as potential antitubercular agents}, journal = {Research on Chemical Intermediates}, volume = {43}, year = {2017}, month = {OCT}, pages = {5675-5690}, type = {Article}, doi = {10.1007/s11164-017-2955-y}, author = {Chavan, Pramod V. and Pandit, Kapil S. and Desai, Uday V. and Wadgaonkar, Prakash P. and Nawale, Laxman and Bhansali, Sujit and Sarkar, Dhiman} } @article {44400, title = {Colloidal nanocomposite of TiN and N-doped few-layer graphene for plasmonics and electrocatalysis}, journal = {ACS Energy Letters}, volume = {2}, year = {2017}, month = {OCT}, pages = {2251-2256}, abstract = {

A combination of high carrier density, high surface area, solution processability, and low cost is desired in a material for electrocatalytic applications, including H-2 evolution and a counter electrode of a solar cell. Also, plasmonic-based applications in biological systems can be derived from such material. In this regard, a colloidal nanocomposite of TiN and N-doped few-layer graphene (TiN NFG) is synthesized from molecular precursors. TiN nano crystals (NCs) provide free electrons for electrical conductivity and plasmonics, whereas NFG is responsible for charge transport, high surface area, and colloidal stability. Colloidal TiN NFG nano composites exhibit a localized surface plasmon resonance band at around 700 nm. Coatings of the nanocomposite form a counter electrode for efficient (8.9\%) dye-sensitized solar cells. Furthermore, the nanocomposite acts as an efficient electrocatalyst for hydrogen evolution reaction, exhibiting an overpotential similar to 161 mV at a current density of 10 mA/cm(2).

}, doi = {10.1021/acsenergylett.7b00741}, author = {Shanker, G. Shiva and Markad, Ganesh B. and Jagadeeswararao, Metikoti and Bansode, Umesh and Nag, Angshuman} } @book {45779, title = {Control of polymerization reactors}, year = {2017}, pages = {1-355}, publisher = {CRC Press}, organization = {CRC Press}, edition = {1st}, address = {New York }, abstract = {

This reference and text provides an in-depth description of developments in control techniques and their application to polymerization reactors and offers important introductory background information on polymerization reaction engineering.;Discussing modelling, identification, linear, nonlinear and multivariable schemes, Control of Polymerization Reactors: presents all available techniques that can be used to control reactors properly for optimal performance; shows how to manipulate pivotal variables that affect reactor control; examines methods for deriving dynamic process models to improve reactor efficiency; reviews reactor control problems and points out end-use properties; supplies methods for measuring process variables, and ways to estimate variables that can{\textquoteright}t be measured; and explains how single-input, single-output (SISO) strategies can be effectively used for control.;Filled with illustrative examples to clarify concepts, including more than 730 figures, tables and equations, Control of Polymerization Reactors is intended for use as a reference for chemical, process development, process design, research and development, control systems, and polymer engineers; and polymer chemists and physicists; as well as a text for upper-level undergraduate and graduate students in polymerization reactor control courses.

}, isbn = {978-082479043-1}, doi = {10.1201/9781315140322}, author = {Schurk, F. J and Deshpande, P. B and Leffew, K. W. and Nadkarni, V. M.} } @article {43929, title = {Convenient new and efficient commercial synthetic route for dasatinib (sprycel{\textregistered})}, journal = {Synthetic Communications}, volume = {47}, year = {2017}, month = {JUN}, pages = {1610-1621}, type = {Article}, abstract = {A new and efficient synthetic route for dual Src/Abl kinase inhibitor Dasatinib (Sprycel{\textregistered}), an anticancer drug, is described. This commercially viable process yields Dasatinib monohydrate free of potential impurities with consistent yield of 68\% in route A and 61\% in route B with HPLC purity >99.80\% over 4 stages.}, doi = {10.1080/00397911.2017.1337150}, author = {Suresh, Garbapu and Nadh, Ratnakaram Venkata and Srinivasu, Navuluri and Yennity, Durgaprasad} } @article {45738, title = {Convenient route for Au@Ti-SiO2 nanocatalyst synthesis and its application for room temperature CO oxidation}, journal = {Journal of Physical Chemistry C}, volume = {121}, year = {2017}, month = {MAR }, pages = {4946-4957}, type = {Article}, abstract = {

Small gold nanoparticles.of size less than 5 nm encapsulated inside titanium modified silica shell have been reported. Here, a modified sol-gel method, which is a one-step process, produces Au@Ti-SiO2 nanocatalyst with a good control of titanium loading. With a titanium loading of 0.9 and 2.2 wt \% in silica, unprecedented low temperature activity (full conversion) is observed for this catalyst for CO oxidation reaction compared to Au@SiO2 catalyst. A combination of optimum sized gold nanoparticles with a large amount of oxygen vacancies created due to Ti incorporation in silica matrix is considered to be the reason for this enhanced catalytic activity. The size of.gold nanoparticles is maintained even after high temperature pretreatments, which show the benefit of encapsulation. The effect of the various pretreatments on the catalytic activity has also been reported.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.6b10202}, author = {Soni, Yogita and Kumar, Anumol Erumpukuthical Ashok and Nayak, Chandrani and Deepak, Francis Leonard and Vinod, C. P.} } @article {43845, title = {Determination of onset temperature from the entropy for fragile to strong liquids}, journal = {Journal of Chemical Physics}, volume = {147}, year = {2017}, month = {JUL}, pages = {Article Number: 024504}, type = {Article}, abstract = {

In this paper, we establish a connection between the onset temperature of glassy dynamics with the change in the entropy for a wide range of model systems. We identify the crossing temperature of pair and excess entropies as the onset temperature. Below the onset temperature, the residual multiparticle entropy, the difference between excess and pair entropies, becomes positive. The positive entropy can be viewed as equivalent to the larger phase space exploration of the system. The new method of onset temperature prediction from entropy is less ambiguous, as it does not depend on any fitting parameter like the existing methods. Published by AIP Publishing.

}, doi = {10.1063/1.4991848}, author = {Banerjee, Atreyee and Nandi, Manoj Kumar and Sastry, Srikanth and Bhattacharyya, Sarika Maitra} } @article {43816, title = {Domibacillus mangrovi sp nov and domibacillus epiphyticus sp nov., isolated from marine habitats of the central west coast of India}, journal = {International Journal of Systematic and Evolutionary Microbiology}, volume = {67}, year = {2017}, month = {AUG}, pages = {3063-3070}, type = {Article}, abstract = {While studying culturable bacterial diversity in different marine habitats of the central west coast of India, two novel Gramstain-positive, strictly aerobic, motile, endospore-forming and rod-shaped bacterial strains designated as SAOS 44(T) and SAB 38(T) were isolated from mangrove sediment soil and the surface of a macroalga, respectively. The strains were taxonomically characterized by using a polyphasic approach and genomic methods. The phylogenetic analysis based on 16S rRNA gene sequencing placed the strains firmly in the genus Domibacillus and were most closely related to Domibacillus antri KCTC 33636(T). The predominant fatty acids were iso-C-15 : 0 and anteiso-C-15 : 0. The major polar lipids were diphosphatidylglycerol and phosphatidylglycerol in addition to an aminophosphoglycolipid. MK-6 was the only respiratory quinone. The range of values of digital DNA-DNA hybridization (19.2-24.9 \%) and the ortho-average nucleotide identity (74.1-81.4 \%) among strains SAOS 44(T), SAB 38(T) and other Domibacillus species clearly supports their status as a distinct and novel species for which the names Domibacillus mangrovi sp. nov. SAOS 44(T) (=DSM 100930(T)=KCTC 33820(T)=MTCC 12571(T)) and Domibacillus epiphyticus sp. nov. SAB 38(T) (=DSM 100929(T)= KCTC 33830(T)=MTCC 12575(T)) are proposed, respectively.}, doi = {10.1099/ijsem.0.002085}, author = {Verma, Ashish and Ojha, Anup Kumar and Dastager, Syed G. and Natarajan, Rameshkumar and Mayilraj, Shanmugam and Krishnamurthi, Srinivasan} } @article {45767, title = {Efficient organic photovoltaics with improved charge extraction and high short-circuit current}, journal = {Journal of Physical Chemistry C}, volume = {121}, year = {2017}, month = {MAR }, pages = {5523-5530}, type = {Article}, abstract = {

Exciton generation, dissociation, free carrier transport, and charge extraction play an important role in the short-circuit current (J(sc)) and power conversion efficiency of an organic bulk heterojunction (BHJ) solar cell (SC). Here we study the impact of band offset at the interfacial layer and the morphology of active layer on the extraction of free carriers. The effects are evaluated on an inverted BHJ SC using zinc oxide (ZnO) as a buffer layer, prepared via two different methods: ZnO nanoparticle dispersed in mixed solvents (ZnO A) and sol-gel method (ZnO B). The device with ZnO A buffer layer improves the charge extraction and J(sc),. The improvement is due to the better band offset and morphology of the blend near the ZnO A/active layer interface. Further, the numerical analysis of current-voltage characteristics illustrates that the morphology at the ZnO A/active layer interface has a more dominant role in improving the performance of the organic photovoltaic than the band offset.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.7b01314}, author = {Mohan, Minu and Nandal, Vikas and Paramadam, Sanish and Reddy, Kasala Prabhakar and Ramkumar, Sekar and Agarwal, Sumanshu and Gopinath, Chinnakonda S. and Nair, Pradeep R. and Namboothiry, Manoj A. G.} } @article {43457, title = {Electrochemical synthesis of a ternary transition metal sulfide nanosheets on nickel foam and energy storage application}, journal = {Journal of Alloys and Compounds}, volume = {695}, year = {2017}, month = {FEB}, pages = {154-161}, abstract = {We report growth of nickel cobalt sulfide (NCS) ultrathin nanosheets directly on Ni foam substrate by a facile and novel electrodeposition method. The as-prepared NCS sample is used as an electrode material for supercapacitor application due to their large electrochemically active surface area and interconnected nanosheet channels for the facilitation of ion transportation. The NCS nanosheets possess enhanced electrochemical performance in terms of fast and high reversible faradaic reactions characterized by prominent oxidation and reduction peaks. NCS nanosheets showed an ultrahigh specific capacitance of 1712 Fg(-1) at a current density of 1 Ag-1 with excellent cyclic stability. The excellent supercapacitor performance of NCS nanosheets can be attributed to its rich redox reactions as well as high transport rate for both electrolyte ions and electrons. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jallcom.2016.10.163}, author = {Sahoo, Surjit and Naik, Kusha Kumar and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {44004, title = {Electron{\textendash}nucleus scalar{\textendash}pseudoscalar interaction in PbF: Z-vector study in the relativistic coupled-cluster framework}, journal = {Molecular Physics}, year = {2017}, month = {MAY}, chapter = {1-6}, abstract = {

The scalar{\textendash}pseudoscalar interaction constant of PbF in its ground state electronic configuration is calculated using the Z-vector method in the relativistic coupled-cluster framework. The precise calculated value is very important to set upper bound limit on (Formula presented.)-odd scalar{\textendash}pseudoscalar interaction constant, ks, from the experimentally observed (Formula presented.)-odd frequency shift. Further, the ratio of the effective electric field to the scalar{\textendash}pseudoscalar interaction constant is also calculated which is required to get an independent upper bound limit of electric dipole moment of electron, de, and ks and how these (de and ks) are interrelated is also presented here. {\textcopyright} 2017 Informa UK Limited, trading as Taylor \& Francis Group

}, author = {Sasmal, S. and Talukdar, K. and Nayak, M.K. and Vaval, N. and Pal, S.} } @article {43915, title = {Epalrestat-cytosine cocrystal and salt structures: attempt to control E,Z -> Z,Z isomerization}, journal = {Crystal Growth \& Design}, volume = {17}, year = {2017}, month = {MAY}, pages = {3350{\textendash}3360}, type = {Article}, abstract = {Cocrystallization of the anti-diabetic drug Eparlestat (EPR) with cytosine (CYT) gave EPR--CYT-H+ form I, a salt-cocrystal hybrid structure, salt hydrate (EPR--CYT-H+-H2O, 1:2:1), and non-stoichiometric solvates of EPR--CYT-H+ with EtOH/n-PrOH included in the rhombohedral symmetry voids, referred to as form II. Desolvation of EPR--CYT-H+ form II solvates resulted in an unsolvated form II of EPR--CYT-H+ which was characterized by DSC, TGA and NMR. The carboxylate{\textbullet}{\textbullet}{\textbullet}cytosinium synthon was observed in the salts structure along with the uncommon CYT-H+{\textbullet}{\textbullet}{\textbullet}H+-CYT base pairing in the structures of salt-cocrystal hybrid and salt hydrate. The crystalline forms were characterized by spectroscopic (IR, NMR), thermal (DSC, HSM, TGA), powder X-ray diffraction (PXRD) and single crystal X-ray diffraction (SC-XRD) techniques. The intent of using the salt/ salt-cocrystal forms as a means to stop the E,Z  Z,Z isomerization of EPR was not successful in photo-irradiation experiments.}, doi = {10.1021/acs.cgd.7b00322}, author = {Nangia, Ashwini Kumar and Battini, Swapna} } @article {45706, title = {Exploiting phosphate-starved cells of scenedesmus SP for the treatment of raw sewage}, journal = {Indian Journal of Microbiology}, volume = {57}, year = {2017}, month = {JUN}, pages = {241-249}, type = {Article}, abstract = {

Phosphate depletion is one of the favorable ways to enhance the sewage water treatment with the algae, however, detailed information is essential with respect to internal phosphate concentration and physiology of the algae. The growth rate of the phosphate-starved Scenedesmus cells was reduced drastically after 48 h. Indicating cells entered in the stationary phase of the growth cycle. Fourier Transform Infrared analysis of phosphate-starved Scenedesmus cells showed the reduction in internal phosphate concentration and an increase in carbohydrate/phosphate and carbohydrate/lipid ratio. The phosphate-starved Scenedesmus cells, with an initial cell density of, 1 x 10(6) cells mL(-1) shows 87\% phosphate and 100 \% nitrogen removal in 24 h. The normal Scenedesmus cells need approximately 48 h to trim down the nutrients from wastewater up to this extent. Other microalgae, Ankistrodesmus, growth pattern was not affected due to phosphate starvation. The cells of Ankistrodesmus was able to reduce 71\% phosphate and 73\% nitrogen within 24 h, with an initial cell density of, 1 x 10(6) cells mL(-1).

}, keywords = {Ankistrodesmus, Fourier Transform Infrared, Phosphate starvation, Scenedesmus, Sewage treatment}, issn = {0046-8991}, doi = {10.1007/s12088-016-0626-0}, author = {Yewalkar-Kulkarni, Swati and Gera, Gayatri and Nene, Sanjay and Pandare, Kiran and Kulkarni, Bhaskar and Kamble, Sanjay} } @article {44158, title = {Facile synthesis of unique cellulose triacetate based flexible and high performance gel polymer electrolyte for lithium ion batteries}, journal = {ACS Applied Materials \& Interfaces}, volume = {9}, year = {2017}, month = {OCT}, pages = {34773-34782}, type = {Article}, abstract = {Lithium ion batteries (LIBs) with polymer based electrolytes have attracted enormous attention due to the possibility of fabricating intrinsically safer and flexible devices. However, economical and eco-friendly sustainable technology is an oncoming challenge to fulfill the ever increasing demand. To circumvent this issue, we have developed a gel polymer electrolyte (GPE) based on renewable polymers like cellulose triacetate and poly (polyethylene glycol methacrylate) p(PEGMA) using a photo polymerization technique. Cellulose triacetate offers good mechanical strength with improved ionic conductivity, owing to its ether and carbonyl functional groups. It is observed that the presence of an open network has a critical impact on lithium ion transport. At room temperature, GPE PC exhibits an optimal ionic conductivity of 1.8 x 10(-3) S cm(-1) and transference number of 0.7. Interestingly, it affords an excellent electrochemical stability window up to 5.0 V vs Li/Li+. GPE PC shows a discharge capacity of 164 mAhg(-1) after the first cycle when evaluated in a Li/GPE/LiFePO4 cell at 0.5 C-rate. Interfacial compatibility of GPE PC with lithium metal improves the overall cycling performance. This system provides a guiding principle toward a future renewable and flexible electrolyte design for flexible LIBs (FLIBs).}, doi = {10.1021/acsami.7b07020}, author = {Nirmale, Trupti C. and Karbhal, Indrapal and Kalubarme, Ramchandra S. and Shelke, Manjusha V. and Varma, Anjani J. and Kale, Bharat B.} } @conference {44037, title = {Fault detection and analysis of Kapton film in fuel cells using image processing}, booktitle = {International Conference on Computing, Analytics and Security Trends, CAST 2016}, year = {2017}, month = {28 April 2017}, abstract = {

Fuel cell is one of the best alternatives of fossil energy in the modern scenario. But still there are some shortcomings such as durability and reliability, which block the wide application of fuel cells. To overcome these barriers, fault diagnosis is an efficient solution. This paper proposes a method for finding dimensional accuracies in Kapton films in membrane electrode assemblies (MEA) of fuel cells using image processing tools for offline fault analysis. {\textcopyright} 2016 IEEE.

}, keywords = {Dimensional accuracy, Fault analysis, fault detection, Fossil energy, fuel cell, Gas fuel purification, image analysis, Image processing, Image processing tools, Kapton films, Membrane electrode assemblies, Offline, polyimides}, isbn = {978-150901338-8}, doi = {10.1109/CAST.2016.7915032}, author = {Firdous, R. and Aherrao, S. and Narute, B. and Borkar, V.} } @article {45717, title = {Fickian yet non-Gaussian behaviour: A dominant role of the intermittent dynamics}, journal = {Journal Of Chemical Physics}, volume = {146}, year = {2017}, month = {APR }, pages = {134504}, type = {Article}, abstract = {

We present a study of the dynamics of small solute particles in a solvent medium where the solute is much smaller in size, mimicking the diffusion of small particles in crowded environment. The solute exhibits Fickian diffusion arising from non-Gaussian Van Hove correlation function. Our study shows that there are at least two possible origins of this non-Gaussian behaviour: the decoupling of the solute-solvent dynamics and the intermittency in the solute motion, the latter playing a dominant role. In the former scenario when averaged over time long enough to explore different solvent environments, the dynamics recovers the Gaussian nature. In the case of intermittent dynamics the non-Gaussianity remains even after long averaging and the Gaussian behaviour is obtained at a much longer time. Our study further shows that only for an intermediate attractive solute-solvent interaction the dynamics of the solute is intermittent. The intermittency disappears for weaker or stronger attractions. Published by AIP Publishing.

}, issn = {0021-9606}, doi = {10.1063/1.4979338}, author = {Acharya, Sayantan and Nandi, Ujjwal Kumar and Bhattacharyya, Sarika Maitra} } @article {43988, title = {High quality hybrid perovskite semiconductor thin films with remarkably enhanced luminescence and defect suppression via quaternary alkyl ammonium salt based treatment}, journal = {Advanced Materials Interfaces}, year = {2017}, month = {JUL}, type = {Article}, abstract = {Significant enhancement in the luminescence and superior photophysical properties of CH3NH3PbBr3 thin films prepared via simple single step spin coating process involving a novel additive mediated solvent extraction step is reported. This process results in significantly lower disorder in CH3NH3PbBr3 perovskites with Urbach energies reducing from ≈35 to ≈17 meV, which is the lowest reported value to date. The additive mediated process also results in a remarkable improvement in the photoluminescence quantum yields (PLQYs) from 1\% to 30\%. Coupled with the overall increase in surface roughness, a significant increase in the internal PLQY from 7\% to 77\% is estimated, indicating the superior quality of the treated thin films. The resultant high quality CH3NH3PbBr3 perovskites with remarkable photophysical properties can be used in realizing highly efficient optoelectronic devices. Highly efficient light emitting diodes using these perovskites are demonstrated here.}, doi = {10.1002/admi.201700562}, author = {Naphade, Rounak A. and Zhao, Baodan and Richter, Johannes M. and Booker, Edward and Krishnamurthy, Shrreya and Friend, Richard H. and Sadhanala, Aditya and Ogale, Satishchandra B.} } @article {43881, title = {High-throughput mass spectrometry analysis revealed a role for glucosamine in potentiating recovery following desiccation stress in chironomus}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {JUN}, pages = {Article Number: 3659}, type = {Article}, abstract = {Desiccation tolerance is an essential survival trait, especially in tropical aquatic organisms that are vulnerable to severe challenges posed by hydroperiodicity patterns in their habitats, characterized by dehydration-rehydration cycles. Here, we report a novel role for glucosamine as a desiccation stress-responsive metabolite in the underexplored tropical aquatic midge, Chironomus ramosus. Using high-throughput liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QToF-MS) analysis, biochemical assays and gene expression studies, we confirmed that glucosamine was essential during the recovery phase in C. ramosus larvae. Additionally, we demonstrated that trehalose, a known stress-protectant was crucial during desiccation but did not offer any advantage to the larvae during recovery. Based on our findings, we emphasise on the collaborative interplay of glucosamine and trehalose in conferring overall resilience to desiccation stress and propose the involvement of the trehalose-chitin metabolic interface in insects as one of the stress-management strategies to potentiate recovery post desiccation through recruitment of glucosamine.}, doi = {10.1038/s41598-017-03572-5}, author = {Thorat, Leena and Oulkar, Dasharath and Banerjee, Kaushik and Gaikwad, Sushama M. and Nath, Bimalendu B.} } @article {43264, title = {Hybrids of thienopyrimidinones and thiouracils as anti-tubercular agents: SAR and docking studies}, journal = {European Journal of Medicinal Chemistry}, volume = {127}, year = {2017}, month = {JAN}, abstract = {

A number of hybrid molecules containing thienopyrimidinones and thiouracil moieties were designed, synthesized and tested against Mycobacterium tuberculosis H37Ra wherein it was observed that the compounds 11-1514 exhibited antitubercular activity in vitro (MIC 7.6{\textendash}19.1 μg/ml, 12{\textendash}35 μM) against dormant stage while compound 15 exhibited antitubercular activity in vitro against dormant (MIC 23.4 μg/ml, 41 μM) as well as active (MIC 25.4 μg/ml, 45 μM) stage. Structural modifications of compound 15 were carried out to study the structure-activity relationship and it was observed that compound 18 exhibited antitubercular activity comparable to compound 15. Cytotoxicity studies revealed that these molecules were non-toxic. The docking study of compound 15 showed that there was binding with the active site of mycobacterial pantothenate synthetase. Further docking studies led to the synthesis of the compounds 16 and 17 and the antitubercular activity screening results showed that these compounds have significant antitubercular activity. The compounds 15-18 (MIC 11{\textendash}29 μg/ml, 19{\textendash}51 μM) can be used as starting points for further optimization. The synthetic strategies used in the present work have potential to prepare a large number of compounds for further refinement of structures and the present results will be very useful in the development of a new class of antimycobacterial agents.

}, doi = {10.1016/j.ejmech.2017.01.009}, author = {Pisal, Mahesh M. and Nawale, Laxman U. and Patil, Manoj and Bhansali, Sujit G. and Gajbhiye, Jayant M. and Sarkar, Dhiman and Chavan, Subhash P. and Borate, Hanumant B.} } @inbook {45822, title = {Hydrogen bonding in molecular crystals}, booktitle = {Comprehensive Supramolecular Chemistry II}, volume = {7}, year = {2017}, pages = {25-48}, publisher = {Elsevier Inc.}, organization = {Elsevier Inc.}, chapter = {Hydrogen Bonding in Molecular Crystals}, address = {Singapur}, abstract = {The hydrogen bond is an important intermolecular interaction in chemical, biological, and materials systems. A proper understanding of noncovalent interactions, notably hydrogen bonds between molecules in supramolecular aggregates, is essential for the design of crystalline materials and new supramolecular systems with desired physical and chemical properties. The International Union of Pure and Applied Chemistry provided a broadly acceptable and yet fairly precise definition of the hydrogen bond in 2011. Knowledge of weak intermolecular interactions and hydrogen bonding has immediate applications in the discovery of new medicines and in the development of novel and biocompatible pharmaceutical products and implants for the next wave of innovations. In this article, we summarize a tutorial background of the hydrogen-bond interaction and then present examples of molecular crystals sustained by this interaction and the role of hydrogen bonding in directing the structural organization. The examples are meant to illustrate the different facets of hydrogen bonding in crystal structures, their design, and properties. We close with some of the new techniques for structure determination for very small or weakly diffracting crystals, as is often the case for supramolecular materials and pharmaceutical products.}, isbn = {978-012803199-5}, doi = {10.1016/B978-0-12-409547-2.12598-3}, author = {Thakuria, R. and Sarma, B. and Nangia, A.} } @article {44017, title = {Hydrogen production from reforming of biogas: review of technological advances and an Indian perspective}, journal = {Renewable and Sustainable Energy Reviews}, volume = {76}, year = {2017}, month = {SEP}, pages = {1032-1052}, type = {Journal Article}, abstract = {

This paper examines the benefits and potential of biogas generation and uses in India, with focus on advances made in hydrogen production by catalytic reforming technologies with steam, O2, and CO2 as the oxidants. Utilization of biomass by means of generating biogas is one of the easiest and cost effective methods of harnessing renewable energy. As India is an agricultural country, a tremendous amount of biomass and livestock waste is generated every year. Likewise the large population of India generates much food and municipal solid waste that is not being utilized for biogas generation. Fuel cells are one of the effective means of utilizing biogas, although the synthesis gas or hydrogen generated from biogas can also be used in internal combustion engines. Higher efficiency of fuel cells (45\%) compared to internal combustion engines (30\%) and even higher with co-generation systems (70\%) make them highly desirable for biogas utilization for power generation. Investigations of hydrogen productionfor fuel cell use are in their infancy stage in India. Apart from a few scattered investigations not much work has been undertaken in the area of research. Large scale hydrogen production is achieved by steam reforming of hydrocarbons, in particular natural gas. Although the process is a proven technology it has come under considerable scrutiny due to its environmental impact and the energy intensive nature of the process. Several technical and scientific challenges have to be overcome for assimilation of the technology for hydrogen production from biogas and wide scale application in India. These challenges include development of less energy intensive features, highly active and poisons-resistant catalyst, and fuel cell development for utilization of biogas generated hydrogen. Hydrogen production from reforming of biogas: Review of technological advances and an Indian perspective. Available from: https://www.researchgate.net/publication/315896154_Hydrogen_production_from_reforming_of_biogas_Review_of_technological_advances_and_an_Indian_perspective [accessed Oct 16 2017].

}, doi = {10.1016/j.rser.2017.02.031}, author = {Nahar, G. and Mote, D. and V. Dupont} } @article {43744, title = {Identification and synthesis of mycalol analogues with improved potency against anaplastic thyroid carcinonia cell lines}, journal = {Journal of Natural Products}, volume = {80}, year = {2017}, month = {APR}, pages = {1125-1133}, type = {Article}, abstract = {The marine metabolite mycalol (1) has a specific inhibitory activity on cells of anaplastic thyroid carcinoma (ATC), a very aggressive and rare cancer that does not have effective conventional therapy. In this study, we describe six new related analogues (2-7) that differ in the length of the terminal alkyl residue and the presence of acetate or 3S-hydroxybutyrate (3S)-3HB as a substituent at C-19. Despite the structural{\textquoteright} analogies, some of the new members were significantly more-cytotokic than 1 on cell lines,derivecl from human ATC. Structures inclusive of the 2{\textquoteright}R,3R,4S,7R,8S,19R absolute configuration were asigned to 2-7 on the basis of detailed spectroscopic analysis, synthesis of different isomers, and application of ECD and Mosher{\textquoteright}s methods. This work led to the identification of mycal61-578 (3) as the most potent analogue, with an IC50 of 2.3 mu M on FRO cells:}, doi = {10.1021/acs.jnatprod.7b00043}, author = {Cutignano, Adele and Seetharamsingh, B. and D{\textquoteright}Angelo, Daniela and Nuzzo, Genoveffa and Khairnar, Pankaj V. and Fusco, Alfredo and Reddy, D. Srinivasa and Fontana, Angelo} } @inbook {45809, title = {Insertion or ziegler-natta polymerization of olefins: science and technology}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {31-116}, publisher = {CRC Press}, organization = {CRC Press}, abstract = {

One of the most disruptive discoveries of twentieth century has been metal-catalyzed polymerization of ethylene to polyethylene by Prof. Karl Ziegler from the Max Plank Institut Fuer Kohlenforschung, Mulheim, Germany. This discovery marked the beginning of an era, which revolutionized the field of chemistry, in particular, the field of polymer chemistry in many aspects and saw an avalanche of patents and publications. Unlike typical academic discoveries, this invention did not stop at the academic labs, but led to the development of a large-scale process that produces about 180 million tons of polyolefins (annually) today. 1 But the very obvious question that comes to our mind is what prompted Prof. Ziegler to react ethylene with the two components (that we will discuss later in this chapter)? It was not an overnight realization, but instead, it was rational analysis of a serendipitous observation and systematic experimentation by Prof. Ziegler.

}, isbn = {978-149876758-3}, issn = {978-149876757-6}, doi = {10.1201/b19905}, author = {Chikkali, S. H. and Patel, K., and Netalkar, S.} } @article {43821, title = {Integrative machine learning strategy for improved prediction of essential genes in Escherichia coli metabolism using flux-coupled features}, journal = {Molecular Biosystems}, volume = {13}, year = {2017}, month = {AUG}, pages = {1584-1596}, type = {Article}, abstract = {Prediction of essential genes helps to identify a minimal set of genes that are absolutely required for the appropriate functioning and survival of a cell. The available machine learning techniques for essential gene prediction have inherent problems, like imbalanced provision of training datasets, biased choice of the best model for a given balanced dataset, choice of a complex machine learning algorithm, and data-based automated selection of biologically relevant features for classification. Here, we propose a simple support vector machine-based learning strategy for the prediction of essential genes in Escherichia coli K-12 MG1655 metabolism that integrates a non-conventional combination of an appropriate sample balanced training set, a unique organism-specific genotype, phenotype attributes that characterize essential genes, and optimal parameters of the learning algorithm to generate the best machine learning model (the model with the highest accuracy among all the models trained for different sample training sets). For the first time, we also introduce flux-coupled metabolic subnetwork-based features for enhancing the classification performance. Our strategy proves to be superior as compared to previous SVM-based strategies in obtaining a biologically relevant classification of genes with high sensitivity and specificity. This methodology was also trained with datasets of other recent supervised classification techniques for essential gene classification and tested using reported test datasets. The testing accuracy was always high as compared to the known techniques, proving that our method outperforms known methods. Observations from our study indicate that essential genes are conserved among homologous bacterial species, demonstrate high codon usage bias, GC content and gene expression, and predominantly possess a tendency to form physiological flux modules in metabolism.}, doi = {10.1039/c7mb00234c}, author = {Nandi, Sutanu and Subramanian, Abhishek and Sarkar, Ram Rup} } @article {44178, title = {Interplay between pi-bridges and positions of branched alkyl groups of unsymmetrical D-A-D-pi-A squaraines in dye-sensitized solar cells: mode of dye anchoring and the charge transfer process at the TiO2/Dye/electrolyte interface}, journal = {ACS Applied Materials \& Interfaces}, volume = {9}, year = {2017}, month = {SEP}, pages = {32698-32712}, type = {Article}, abstract = {

Far-red-absorbing squaraines possessing high molar absorptivity (\>10(5) M-1 cm(-1)) are being attracted as high-efficiency chromophores in dye-sensitized solar cells (DSSCs). A series of donor acceptor -donor-pi spacer-acceptor (D-A-D-pi-A) unsymmetrical squaraines, PSQ1-5, with indoline donor and squaric/cyanoacetic acid acceptor units, were designed for sensitized solar cells. For extending the absorption toward the near-infrared region (NIR) and controlling the orientation on the TiO2 surface, benzene (PSQ1 and PSQ2) and thiophene (PSQ3-5) 7r-spacers and out-of-plane branched alkyl groups at the indoline that are away (PSQ1, PSQ3, and PSQS) or near (PSQ2 and PSQ4) the anchoring group, respectively, were introduced. Dynamic aggregation tendency of PSQ1 and PSQ3 than that of their isomers systematically modulates the orientation on the TiO2 surface, which in turn enhances photovoltaic performance. Absorptance on a thin transparent TiO2 film shows a visible-to-NIR response with an onset around 800 nm for PSQ3-5. Although there is resemblance in electrochemical redox levels, their high injection efficiency and recombination resistance differentiated impact on the way of anchoring and the dihedral angle between D-A-D units and g-spacers. DSSCs sensitized with PSQS achieved a PCE of 8.15\% under simulated AM 1.5G illumination (100 mW cm(-2)), with the current density (j) and open-circuit voltage (Voc) of 19.73 mA cm(-2) and 630 mV, respectively. A clear comparison of the incident-photon-to-current conversion efficiency versus the light-harvesting efficiency correlates the structure-property relationship with J obtained for PSQ dyes. Electrochemical impedance spectroscopy was carried out to examine the TiO2/dye/electrolyte interface for further confirmation of the enhanced PCE of top-se-alkylated PSQS over that of other dyes.

}, keywords = {D-A-D-pi-A framework, dye-sensitized solar cell, H- and J-type aggregation, orientation of dyes, static/dynamic aggregates, unsymmetrical squaraine}, issn = {1944-8244}, doi = {10.1021/acsami.7b08346}, author = {Punitharasu, Vellimalai and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @inbook {45813, title = {Introduction to organometallics}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {1-30}, publisher = {CRC Press}, organization = {CRC Press}, chapter = {Introduction to organometallics}, abstract = {

Polymers are gigantic macromolecules that are constructed by linking together a large number of smaller molecules called monomers through the process of polymerization. Polymer chemistry has evolved from a primitive, pragmatic discipline in the early 1920s to a well-established academic course today. The early efforts by Hermann Staudinger laid the foundation of rational polymer science and today it is nearly well understood as any other contemporary science. The fundamentals of chemistry and physics of polymers are detailed in many text books and we refer the reader to dedicated main stream polymer science books. 1 Nevertheless, the subject is forging ahead and is conquering new territories, and understanding of these new frontiers is equally important.

}, doi = {10.1201/b19905}, author = {Chikkali, S.H. and Netalkar, S.} } @article {43942, title = {Investigation into the taxonomy of {\textquotedblleft} B. aminovorans{\textquotedblright} and its reclassification to the genus Domibacillus as Domibacillus aminovorans sp. nov.}, journal = {Systematic and Applied Microbiology}, volume = {40 }, year = {2017}, month = {AUG}, pages = {458-467}, type = {Article}, abstract = {The species "Bacillus aminovorans" was categorized as species Incertae Sedis meaning taxa with uncertain taxonomic position because of insufficient description of phenotypic properties and lack of understanding of its phylogenetic relationship (Claus and Berkeley [5]). In this study two strains "B. aminovorans" DSM 1314T and DSM 4337 were phenotypically and phylogenomically analyzed. The strains are Gram-staining-positive, spore forming rods and unable to utilize/ferment most of the sugars tested except glucose. The major fatty acids are anteiso-C15:0 and iso-C15:0. The major polar lipids are diphosphatidylglycerol, phosphatidylglycerol and an aminophosphoglycolipid. The cell wall peptidoglycan is of A1γ type with meso-Dpm as the diamino acid. The menaquinone type present is MK-6. The G+C content of the genomic DNA of the type strain is 40.8mol\%. These characteristics were found to be in line with description of the genus Domibacillus. Moreover phylogenetic analysis based on 16S rRNA gene sequence retrieved "B. aminovorans" within the genus Domibacillus with D. antri XD 80T as the closest relative. Additionally genome sequencing of the strains and their comparison with whole genome sequences of other Domibacillus spp. confirmed their distinctiveness and separate species status within the genus based on parameters of genome to genome distance calculator (GGDC) and average nucleotide identity (ANI) values. Therefore a novel species Domibacillus aminovorans sp. nov. (DSM 1314T =LMG 16796T) is proposed.}, keywords = {16S rRNA, Domibacillus aminovorans, MALDI-TOF, {\textquoteleft}{\textquoteleft}Bacillus aminovorans{\textquoteright}{\textquoteright}}, issn = {0723-2020}, doi = {10.1016/j.syapm.2017.07.003}, author = {Verma, Ashish and Ojha, Anup Kumar and Pal, Yash and Kumari, Parveen and Schumann, Peter and Gruber-Vodicka, Harald and Dastager, Syed Gulam and Natarajan, Ramesh Kumar and Mayilraj, Shanmugam and Krishnamurthi, Srinivasan} } @article {43811, title = {Iron-catalyzed dehydrogenation reactions and their applications in sustainable energy and catalysis}, journal = {Catalysis Science \& Technology}, volume = {7}, year = {2017}, month = {AUG}, pages = {3177-3195}, type = {Article}, abstract = {Inspired by nature, chemists have designed new catalysts in the pursuit of selective bond activation and chemical transformations. Emergent biological systems often use earth-abundant first-row transition elements as catalytically active sites to facilitate specific and highly selective chemical processes. The design of a new catalytic system based on abundant and inexpensive catalysts, particularly the iron-based catalysts, for fundamentally significant synthetic transformations under environmentally benign conditions is an important paradigm in chemical synthesis. In recent times, iron-based catalytic systems have shown unprecedented reactivity in the acceptorless dehydrogenation reactions of feedstock chemicals, with the liberation of molecular hydrogen as the by-product, and have enabled greener chemical synthetic methods and alternative energy storage systems. Indeed, it has been demonstrated that the proper design of iron catalysts by judiciously choosing ligands, can aid in the development of new sustainable energy storage systems and catalysis. This tutorial review focuses on the recent development of iron-based dehydrogenation reactions of fundamentally important feedstock, as a route to sustainable chemical synthesis and energy storage applications. The emerging area of the iron-based dehydrogenation strategy provides an opportunity to make industrially applicable, cost-effective and environmentally benign catalytic systems.}, doi = {10.1039/c7cy00879a}, author = {Balaraman, Ekambaram and Nandakumar, Avanashiappan and Jaiswal, Garima and Sahoo, Manoj K.} } @article {45700, title = {Liquid crystalline supramolecular crosslinked polymer complexes of ditopic rylenebisimides and P4VP}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {55}, year = {2017}, month = {MAR}, pages = {951-959}, type = {Article}, abstract = {

Perylenebisimide and naphthalenebisimide (PBIPDP and NBI-PDP) end functionalized with pentadecyl phenol is designed as ditopic hydrogen bonding acceptors to form supramolecular crosslinked network with poly(4-vinyl pyridine) (P4VP). The pristine PBI-PDP has been grown as single crystals from DCM-MeOH (dichloromethane-methanol) mixture at room temperature, which revealed a P21 space group. Noticeably, the pentadecyl alkyl chain shields the aromatic perylene core on both sides resulting in the absence of p-p interaction in single-crystal assembly. The naphthalenebisimide derivative exhibits thermotropic liquid crystalline behavior, while both the molecules exhibits lyotropic liquid crystalline phases in tetrahydrofuran (THF), which were characterized using a combination of differential scanning calorimeter, X-ray diffraction, and polarized light microscopy. The hydrogen-bonded complex of both the rylenebisimides with P4VP preserves the mesomorphic properties in THF. The electron transport mobility measured by space charge limited current measurements reveals a two orders of magnitude increase in the charge transport in the P4VP complex compared to that of the pristine molecule. The average electron mobility obtained is mu(e, avg): 10(-3) cm(2)/Vs for P4VP-PBI compared to mu(e, avg): 10(-5) cm(2)/Vs for pristine PBI derivative. (C) 2017 Wiley Periodicals, Inc.

}, keywords = {crystal structures, ditopic rylenebisimide, hydrogen bonding, lyotropic liquid crystal, P4VP, Self-assembly, supramolecular crosslink, supramolecular structures}, issn = {0887-624X}, doi = {10.1002/pola.28449}, author = {Saibal, B. and Narayan, Rekha and Chithiravel, S. and Asha, S. K.} } @article {43823, title = {Low-dimensional hybrid perovskites as high performance anodes for alkali-ion batteries}, journal = {Journal of Materials Chemistry A}, volume = {5}, year = {2017}, month = {SEP}, chapter = {18634-18642}, abstract = {

State-of-the-art Li (or Na) ion batteries work by insertion/extraction of the alkali metal ions into a porous electrode material, where the overall capacity is strongly dependent on the accessibility of the host material interior to the ions. On the other hand, the performance stability depends on various factors governed by the specific constitution of the electrode. Here we show that molecularly engineered low-dimensional hybrid perovskites can work as excellent anode materials for alkali-ion batteries. We measure a high reversible capacity of 646 mA h g(-1) at 100 mA g(-1) with good stability tested up to 250 cycles for the benzidine mediated lead iodide based 1D system. An ex situ analysis of the electrodes reveals that the storage primarily occurs via the Li-x(or Na-x)Pb alloying/de-alloying process. We anticipate that these results open a new direction for the use of low-dimensional hybrid perovskites for energy storage applications.

}, keywords = {Generation, Inorganic-Organic Hybrid, Lead Iodide, lithiation-intramolecular electrophilic reaction, Na-Air Battery, Negative Electrodes, Organometal Halide perovskites, PB, Sequential Deposition, Solar-cells}, issn = {2050-7488}, doi = {10.1039/c7ta04529h}, author = {Tathavadekar, Mukta and Krishnamurthy, Shrreya and Banerjee, Aparna and Nagane, Satyawan and Gawli, Yogesh and Suryawanshi, Anil and Bhat, Suresh and Puthusseri, Dhanya and Mohite, Aditya D. and Ogale, Satishchandra} } @article {43987, title = {Manganese incorporated on glucose as an efficient catalyst for the synthesis of adipic acid using molecular O2 in aqueous medium}, journal = {Applied Catalysis A: General}, volume = {546}, year = {2017}, month = {SEP}, pages = {122-125}, type = {Journal Article}, abstract = {A new manganese incorporated on glucose catalyst Mn@CC-SO3H-NH2 was synthesized and well characterized using FT-IR, PXRD, EDAX, SEM, TEM, [13] C cross-polarization NMR and BET analysis. The catalyst thus synthesized was studied for its utility in the synthesis of industrially important chemical adipic acid starting from readily available cyclohexanone using molecular O2 as a source. Adipic acid was obtained in maximum yield of 82\% using Mn@CC-SO3H-NH2 catalyst in water as a solvent. The catalyst was easily recovered and reused for minimum five runs without any significant loss in the yield of products. Using molecular O2 as an oxidant and water as a solvent, the reaction is very important from green chemistry perspectives and can also be industrially feasible. }, keywords = {Adipic Acid, Catalyst, manganese, recyclable, Water}, doi = {10.1016/j.apcata.2017.08.008}, author = {Nale, S.D.}, editor = {Rathod, P. V.} } @article {43790, title = {Mapping architectural and transcriptional alterations in non-lesional and lesional epidermis in vitiligo}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {AUG}, type = {Article}, abstract = {In vitiligo, chronic loss of melanocytes and consequent absence of melanin from the epidermis presents a challenge for long-term tissue maintenance. The stable vitiligo patches are known to attain an irreversible depigmented state. However, the molecular and cellular processes resulting in this remodeled tissue homeostasis is unclear. To investigate the complex interplay of inductive signals and cell intrinsic factors that support the new acquired state, we compared the matched lesional and non-lesional epidermis obtained from stable non-segmental vitiligo subjects. Hierarchical clustering of genome-wide expression of transcripts surprisingly segregated lesional and non-lesional samples in two distinct clades, despite the apparent heterogeneity in the lesions of different vitiligo subjects. Pathway enrichment showed the expected downregulation of melanogenic pathway and a significant downregulation of cornification and keratinocyte differentiation processes. These perturbations could indeed be recapitulated in the lesional epidermal tissue, including blunting of rete-ridges, thickening of stratum corneum and increase in the size of corneocytes. In addition, we identify marked increase in the putrescine levels due to the elevated expression of spermine/spermidine acetyl transferase. Our study provides insights into the intrinsic self-renewing ability of damaged lesional tissue to restore epidermal functionality in vitiligo.}, doi = {10.1038/s41598-017-10253-w}, author = {Singh, Archana and Gotherwal, Vishvabandhu and Junni, Paivi and Vijayan, Vinaya and Tiwari, Manisha and Ganju, Parul and Kumar, Avinash and Sharma, Pankaj and Fatima, Tanveer and Gupta, Aayush and Holla, Ananthaprasad and Kar, Hemanta K. and Khanna, Sangeeta and Thukral, Lipi and Malik, Garima and Natarajan, Krishnamurthy and Gadgil, Chetan J. and Lahesmaa, Riitta and Natarajan, Vivek T. and Rani, Rajni and Gokhale, Rajesh S.} } @article {45740, title = {Mechanochemical synthesis of N-salicylideneaniline: thermosalient effect of polymorphic crystals}, journal = {IUCRJ}, volume = {4}, year = {2017}, month = {MAY}, pages = {243-250}, type = {Article}, abstract = {

Polymorphs of the dichloro derivative of N-salicylideneaniline exhibit mechanical responses such as jumping (Forms I and III) and exploding (Form II) in its three polymorphs. The molecules are connected via the amide N-H center dot center dot center dot O dimer synthon and C-Cl center dot center dot center dot O halogen bond in the three crystal structures. A fourth high-temperature Form IV was confirmed by variable-temperature single-crystal X-ray diffraction at 180 degrees C. The behaviour of jumping exhibited by the polymorphic crystals of Forms I and III is due to the layered sheet morphology and the transmission of thermal stress in a single direction, compared with the corrugated sheet structure of Form II such that heat dissipation is more isotropic causing blasting. The role of weak C-Cl center dot center dot center dot O interactions in the thermal response of molecular crystals is discussed.

}, keywords = {crystal design, crystal engineering, Halogen bonding, hydrogen bonding, intermolecular interactions, materials science, mechanochemistry, polymorphism}, issn = {2052-2525}, doi = {10.1107/S2052252517004043}, author = {Mittapalli, Sudhir and Perumalla, D. Sravanakumar and Nangia, Ashwini} } @article {45743, title = {Metal free acid base catalyst in the selective synthesis of 2,5-diformylfuran from hydroxynnethylfurfural, fructose, and glucose}, journal = {ACS Sustainable Chemistry \& Engineering }, volume = {5}, year = {2017}, month = {JAN}, pages = {701-707}, type = {Article}, abstract = {A novel metal free acid-base (CC-SO3H-NH2) catalyst was synthesized by introducing acidic -SO3H, -COOH, and silyloxypropylamine (-OSiCH2CH2CH2NH2) functional groups on glucose derived carbocatalyst. The catalyst was characterized by Fourier transform infrared (FTIR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses. Superior catalytic activity was shown by the catalyst toward one-pot synthesis of DFF using molecular oxygen as the sole oxidant. The catalyst was found to be highly selective in synthesis of 2,5-diformylfuran (DFF) from hydroxymethylfurfural (HMF), fructose, and, more importantly, from glucose with excellent yields. Moreover, the catalyst was easily recycled and reused without any significant loss in its catalytic activity.}, doi = {10.1021/acssuschemeng.6b02053}, author = {Rathod, P. V. and Nale, S. D. and Jadhav, V. H.} } @article {43977, title = {MgFeCe ternary layered double hydroxide as highly efficient and recyclable heterogeneous base catalyst for synthesis of dimethyl carbonate by transesterification}, journal = {Catalysis Letters}, volume = {147}, year = {2017}, month = {OCT}, pages = { 2558-2569}, type = {Journal Article}, abstract = {A series of Mg3:Fex + Ce1-x LDHs (3:1) were synthesized by co-precipitation method by varying molar ratio of Fe:Ce between 1:0 to 0:1 (LDH-1 to LDH-6). All synthesized LDHs were characterized by XRD, FT-IR, TEM, N2 sorption, benzoic acid titration and XPS in detail and evaluated for selective synthesis of dimethyl carbonate by transesterification of ethylene carbonate with methanol. It was demonstrated that the structural and basic properties of synthesized LDHs were strongly dependent on the Fe:Ce molar ratio (Ce concentration). The correlation between their physicochemical properties and catalytic performance was studied in detail. Among all synthesized LDHs the best result was obtained with LDH-3 (Fe:Ce = 0.85:0.15) where LDH structure remained intact, and showed high number of strong basic sites on LDH surface. LDH-3 was recycled 7 times while maintaining high catalyst activity and selectivity towards DMC. The obtained results elucidate the important role of Ce in modifying the basic properties of LDH in enhancing the catalytic activity for DMC synthesis. Graphical Abstract: [Figure not available: see fulltext.]. {\textcopyright} 2017, Springer Science+Business Media, LLC.}, keywords = {Dimethyl carbonate, ethylene carbonate, Mg{\textendash}Fe{\textendash}Ce Ternary Hydrotalcite, transesterification}, doi = {10.1007/s10562-017-2146-x}, author = {Nivangune, N. T.}, editor = {Ranade, V. V.} } @article {43911, title = {Microwave assisted batch and continuous flow synthesis of palladium supported on magnetic nickel nanocrystals and their evaluation as reusable catalyst}, journal = {Crystal Growth \& Design}, volume = {17}, year = {2017}, month = {AUG}, pages = {5163{\textendash}5169}, type = {Article}, abstract = {Palladium nanocrystals (NCs) supported on nickel NCs (Pd/Ni) were synthesized in a continuous flow manner by the microwave-assisted method in the presence and absence of oleylamine. Parameters optimized for batch experiments were considered while performing continuous flow synthesis. The Pd/Ni NCs synthesized in the presence of oleylamine displayed good catalytic activity for hydrogenation of aromatic nitro compounds, and those bearing alkene, and alkyne moieties. The ferromagnetic character of the supporting nickel NCs allowed the recovery of the catalyst and these recovered catalysts could be reused several times.}, issn = {1528-7483}, doi = {10.1021/acs.cgd.7b00639}, author = {Nikam, Arun V. and Kulkarni, Amol A. and Prasad, Bhagavatula L. V.} } @article {43878, title = {Mixed-stack charge transfer crystals of pillar[5]quinone and tetrathiafulvalene exhibiting ferroelectric features}, journal = {Chemistry- A European Journal }, volume = {23}, year = {2017}, month = {SEP}, chapter = {12630-12635}, abstract = {

Ferroelectric materials find extensive applications in the fabrication of compact memory devices and ultra-sensitive multifunctional detectors. Face-to-face alternate stacking of electron donors and acceptors effectuate long-range unidirectional ordering of charge-transfer (CT) dipoles, promising tunable ferroelectricity. Herein we report a new TTF-quinone system-an emerald green CT complex consisting pillar[5]quinone (P5Q) and tetrathiafulvalene (TTF). The CT crystals, as determined by single crystal synchrotron X-ray diffraction, adopt a 1:1 mixed-stack arrangement of donor and acceptor with alternating dimers of TTF and 1,4-dioxane encapsulated P5Q. The TTF-P5Q.dioxane crystal possesses a macroscopic polarization axis giving rise to ferroelectricity at room temperature. The CT complex manifests ferroelectric features such as optical polarization rotation, temperature-dependent phase transition and piezoelectric response in single crystals. Ferroelectric behavior observed in P5Q-based CT complex widens the scope for further work on this structurally intriguing and readily accessible cyclic pentaquinone.

}, keywords = {Acceptor, Charge-transfer complexes, Chemistry, Conductors, DDQ, Donor, ferroelectric, Macrocycles, Organic Metals, Pi-interaction, Pillar[5]quinone, salts, Transfer Complexes, Transport}, issn = {0947-6539}, doi = {10.1002/chem.201702577}, author = {Shivakumar, Kilingaru I. and Swathi, Kadaba and Goudappagouda and Das, Tamal C. and Kumar, Ashwani and Makde, Ravindra D. and Vanka, Kumar and Narayan, Kavassery S. and Babu, Sukumaran Santhosh and Sanjayan, Gangadhar J.} } @article {44157, title = {Molecular control of the band edge movement and the recombination process in donor-acceptor hemicyanine-sensitized solar cells}, journal = {Journal of Physical Chemistry C}, volume = {121}, year = {2017}, month = {OCT}, pages = {21836-21847}, type = {Article}, abstract = {The presence of downward shift in the band edge and the recombination reactions in the hemicyanine-sensitized solar cell reduces the open-circuit potential (V-oc) and the short-circuit current density (J(sc), which in turn decreases the dye cell performance. Choosing either an electrolyte possessing minimum overpotentials or a systematic dye design which can efficiently suppress the diffusion of charged species toward the TiO2 can improve the overall power conversion efficiency (PCE). Here, a series of donor acceptor (D-A) hemicyanine dyes were synthesized utilizing a planar heterotriangulene (HT) or triphenylamine (TPA) donor and alkyl-functionalized indolium carboxylic acid acceptor unit. By introducing strong HT donor instead of TPA, the photophysical, and electrochemical properties of D-A dyes are significantly modulated. The strong donor nature of HT and effective passivation of surface by hydrophobic alkyl chains close to the anchoring group for NC3 dye exhibits an average PCE of 4.34\% with a V-oc of 0.416 V, J(sc) of 20.04 mA cm(-2), and fill factor (ff) of 52.03\% under simulated AM 1.5G illumination (100 mW cm-2) without 3 alpha,7 alpha-adihydroxy-5 beta-cholic acid coadsorbent (CDCA). The intrinsic dipole of the hemicyanine dye and the presence of Li+ ions in iodide/triiodide redox couple without tert-butylpyridine (TBP) additive induces a downward shift in conduction band edge (E-CB) of TiO2. By rational molecular design, the extend of shift in E-CB is controlled and enhanced the V-oc. Electrochemical impedance spectroscopy (EIS) studies revealed the high charge transfer resistance (R-ct) and long lifetime (tau) of injected electrons in HT-based dyes than that of TPA derivatives, which provide insight into the passivation of Li+ and I- ions by current D-A dye design possessing alkyl functionalities to increase both the J(sc) and V-oc.}, doi = {10.1021/acs.jpcc.7b04623}, author = {Karjule, Neeta and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @inbook {43983, title = {Molecular methods for identification of clostridium tetani by targeting neurotoxin}, booktitle = {Methods Molecular Biology}, volume = {1600}, year = {2017}, pages = {37-47}, abstract = {Tetanus is a potentially fatal muscle spasm disease. It is an important public health problem, especially in rural/tribal areas of developing countries. Tetanus toxin, a neurotoxin (tetanospasmin ), is the most important virulence factor that plays a key role in the pathogenicity of tetanus . Confirmation of virulence by confirming the production of tetanospasmin by infecting species forms the most important part in the diagnosis of tetanus . Various molecular methods have been devised for confirmation of diagnosis by targeting different genes. The most common molecular methods are tetanospasmin producing (TetX) gene-targeted methods using TetX-specific primers. Here, we describe various molecular methods targeting TetX gene such as polymerase chain reaction, pulsed-field gel electrophoresis, Southern blotting, loop-mediated isothermal amplification assay, etc. to confirm the virulence of Cl. tetani.}, doi = {10.1007/978-1-4939-6958-6_4}, author = {Dharne, Mahesh S. and Nagoba, Basavraj S. and Gohil, Kushal N.} } @article {43171, title = {Multiple functionalities of Ni nanoparticles embedded in carboxymethyl guar gum polymer: catalytic activity and superparamagnetism}, journal = {Applied Surface Science}, year = {2017}, month = {JAN}, abstract = {Composites comprising of metallic nanoparticles in polymer matrices have allured significant importance due to multifunctionalities. Here a simple protocol has been described to embed Ni nanoparticles in carboxymethyl guar gum (CMGG) polymer. The composite formation helps in the stabilization of Ni nanoparticles which are otherwise prone towards aerial oxidation. Further the nanoparticles retain their superparamagnetic nature and catalytic capacity. Ni-Polymer composite catalyses the reduction of 4-Nitrophenol to 4-Aminophenol very efficiently in presence of NaBH4, attaining a complete conversion under some experimental conditions. Ni-Polymer composite is well characterized using UV{\textendash}vis spectroscopy, FTIR, XPS, powder XRD, TGA, SEM and TEM. A detailed magnetic measurement using superconducting quantum interference device-vibrating sample magnetometer (SQUID-VSM) reveals superparamagnetic behaviour of the composite.}, author = {Sardar, Debasmita and Sengupta, Manideepa and Bordoloi, Ankur and Ahmed, Md. A. and Neogi, S. K. and Bandyopadhyay, Sanjoy and Jain, Ruchi and Gopinath, Chinnakonda S. and Bala, Tanushree} } @article {43824, title = {Nanocrystalline Fe-Fe2O3 particledeposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction}, journal = {Nanoscale}, volume = {9}, year = {2017}, month = {SEP}, pages = {13341-13342}, type = {Article}, issn = { 2040-3364}, doi = {10.1039/c7nr90179h}, author = {Dhavale, Vishal M. and Singh, Santosh K. and Nadeema, Ayasha and Gaikwad, Sachin S. and Kurungot, Sreekumar} } @article {43499, title = {New and efficient enantioselective synthesis of both enantiomers of the calcium channel blocker bepridil}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {JAN}, pages = {824-829}, abstract = {A concise and efficient enantioselective synthesis of both enantiomers of bepridil, a calcium channel blocker, is reported. Jacobsen{\textquoteright}s hydrolytic kinetic resolution method was utilized to resolve racemic 2-(isobutoxymethyl) oxirane. The incorporation of the succinimide moiety by the Mitsunobu reaction, which was investigated in detail, occurred without any loss of enantioselectivity. Using this strategy, both enantiomers of the target molecule were obtained in good yield and with high enantiopurity (ee > 99\%).}, doi = {10.1039/c6nj02928k}, author = {Mujahid, Mohammad and Subramanian, Jambu and Nalla, Viswanadh and Sasikumar, Murugesan and Kunte, Sunita Sharad and Muthukrishnan, Murugan} } @article {42937, title = {New bithiazolyl hydrazones: novel synthesis, characterization and antitubercular evaluation}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {27}, year = {2017}, month = {JAN}, pages = {288{\textendash}294}, abstract = {

New bithiazolyl hydrazones (6a{\textendash}l) have been first time synthesized by carrying novel one pot cyclocondensation of 5-acyl thiazoles (1a{\textendash}b), thiosemicarbazide (2) and substituted phenacyl chlorides (4a{\textendash}f) in freshly prepared ionic liquid, diisopropyl ethyl ammonium acetate (DIPEAc) at room temperature. The newly synthesized compounds have been evaluated for their antitubercular activity and the compounds 3b, 6a, 6b, 6d, 6e, 6f, 6g, and 6l have displayed noticeable antitubercular activity compared to Rifampicin with tolerable cytotoxicity. All these compounds were also screened for their antibacterial activity and found that, compounds 6j and 6k have exhibited a very good antibacterial activity. Molecular docking study has shown better harmony with the evaluation trend shown by these compounds under in vitro antitubercular screening.

}, doi = {10.1016/j.bmcl.2016.11.056}, author = {Bhalerao, Mahendra B. and Dhumal, Sambhaji T. and Deshmukh, Amarsinh R. and Nawale, Laxman U. and Khedkar, Vijay M. and Sarkar, Dhiman and Mane, Ramrao A.} } @article {44016, title = {New insight into sugarcane industry waste utilization (press mud) for cleaner biobutanol production by using c. acetobutylicum nrrl b-527}, journal = {Applied Biochemistry and Biotechnology}, year = {2017}, month = {MAY}, chapter = {1-18}, abstract = {

In the present study, press mud, a sugar industry waste, was explored for biobutanol production to strengthen agricultural economy. The fermentative production of biobutanol was investigated via series of steps, viz. characterization, drying, acid hydrolysis, detoxification, and fermentation. Press mud contains an adequate amount of cellulose (22.3\%) and hemicellulose (21.67\%) on dry basis, and hence, it can be utilized for further acetone-butanol-ethanol (ABE) production. Drying experiments were conducted in the temperature range of 60{\textendash}120 {\textdegree}C to circumvent microbial spoilage and enhance storability of press mud. Furthermore, acidic pretreatment variables, viz. sulfuric acid concentration, solid to liquid ratio, and time, were optimized using response surface methodology. The corresponding values were found to be 1.5\% (v/v), 1:5 g/mL, and 15 min, respectively. In addition, detoxification studies were also conducted using activated charcoal, which removed almost 93{\textendash}97\% phenolics and around 98\% furans, which are toxic to microorganisms during fermentation. Finally, the batch fermentation of detoxified press mud slurry (the sample dried at 100 {\textdegree}C and pretreated) using Clostridium acetobutylicum NRRL B-527 resulted in a higher butanol production of 4.43 g/L with a total ABE of 6.69 g/L. {\textcopyright} 2017 Springer Science+Business Media New York Author keywords

}, keywords = {Acetone, Acetone butanol ethanols, Acidic pre treatments, Agriculture, Biobutanol, cellulose, Clostridium acetobutylicum, Detoxification, Drying, Drying Fermentation, FermentationSpoilage, Fermentative production, Pre-treatment, Press mud, Press mud Pretreatment, Response surface methodology, Sugar industry, Sulfur determination}, issn = {0273-2289}, doi = {10.1007/s12010-017-2479-3}, author = {Nimbalkar, Pranhita R. and Khedkar, Manisha A. and Gaikwad, S. G. and Chavan, Pramod V. and Bankar, Sandip B.} } @article {43870, title = {NiZn double hydroxide nanosheet-anchored nitrogen-doped graphene enriched with the gamma-NiOOH phase as an activity modulated water oxidation electrocatalyst}, journal = {Nanoscale}, volume = {9}, year = {2017}, month = {SEP}, pages = {12590-12600}, type = {Journal Article}, chapter = {12590-12600}, abstract = {

Herein, we report a facile solvothermal process to synthesize an active electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium by anchoring nanosheets of a NiZn double hydroxide over nitrogen doped reduced graphene oxide after enriching the system with the γ-NiOOH phase. This catalyst possesses a thin, porous and open layered structure, which makes the system more efficient and accessible for a better electrochemical water oxidation reaction. Moreover, we experimentally demonstrated that incorporation of Zn via a single-step solvothermal method provides an easy approach to obtain plenty of exposed γ-NiOOH phases to make the system more viable for OER with a small overpotential of 290 mV at 10 mA cm-2 and a Tafel slope of 44 mV per decade. In addition to this, the oxophilic nature of Zn in the (Zn)Ni-LDH/N-rGO catalyst helps to improve the long-term stability of the whole system. The obtained results open up possibilities for the design of future robust OER electrocatalysts by the use of very cheap and abundant materials like Ni and Zn in place of expensive Ir and Ru in the present commercial electrocatalysts.

}, keywords = {catalysis, Efficient Electrocatalyst, kinetics, Metal, Nickel-Hydroxide, oxide, Oxygen Evolution Reaction, performance, XPS Spectra, zinc}, issn = {2040-3364}, doi = {10.1039/c7nr02225e}, author = {Nadeema, Ayasha and Dhavale, Vishal M. and Kurungot, Sreekumar} } @article {45678, title = {Novel silaproline (Sip)-incorporated close structural mimics of potent antidepressant peptide drug rapastinel (GLYX-13)}, journal = {Tetrahedron Letters}, volume = {58}, year = {2017}, month = {APR}, pages = {1568-1571}, type = {Article}, abstract = {Rapastinel (GLYX-13) is a C-amidated tetrapeptide drug under clinical development for adjunctive treatment of major depressive disorder (MDD). Rapastinel features two consecutive proline residues centered at the peptide sequence (Thr-Pro-Pro-Thr-NH2), which are detrimental to its biological activity. In this communication, we report the synthesis of very close structural analogues of rapastinel comprising silaproline (Sip) as proline surrogate. By virtue of its enhanced lipophilicity and metabolic stability, Sip introduction in the native rapastinel sequence is expected to improve its pharmacokinetic profiles.}, doi = {10.1016/j.tetlet.2017.03.015}, author = {Madica, Krishnaprasad and Nadimpally, Krishna Chaitanya and Sanjayan, Gangadhar J.} } @article {43554, title = {Organocatalyzed efficient one-pot synthesis, biological evaluation, and molecular docking studies of 4,4-(Arylmethylene)bis-(3-methyl-1-phenyl-1H-pyrazol-5-ols)}, journal = {Journal of Heterocyclic Chemistry}, volume = {54}, year = {2017}, month = {MAR}, pages = {1109-1120}, abstract = {The synthesis of 4,4-(arylmethylene)bis-(3-methyl-1-phenyl-1H-pyrazol-5-ol) derivatives catalyzed by ?-proline is a simple, versatile, and efficient method. In vitro antioxidant, anti-inflammatory, and antimicrobial activities of compounds 4a, 4b, 4c, 4d, 4e, 4f, 4g, 4h, 4i, 4j were studied. Furthermore, to rationalize the observed anti-inflammatory activity data, molecular docking study has been performed against COX-2 enzyme which revealed a good binding affinity for these molecules and could provide an insight into the various bonded and non-bonded interactions guiding their binding affinity.}, doi = {10.1002/jhet.2681}, author = {Mahajan, Pravin S. and Nikam, Mukesh D. and Khedkar, Vijay and Jha, Prakash and Badadhe, Pravin V. and Gill, Charansingh H.} } @article {44150, title = {Organo-clay hybrid hydrophobic spherical styrene divinylbenzene crosslink beads for high-performance carbon dioxide capture}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {OCT}, pages = {12326-12335}, type = {Article}, abstract = {Herein, we report carbon dioxide sorption properties for a series of cloisite-containing crosslink hybrid materials. These materials were prepared by copolymerizing styrene divinylbenzene in the presence of various cloisites through suspension polymerization in one pot to obtain uniform spherical beads. The homopolymer formed during the polymerization was separated from the hybrid. The synthetic strategy is user-friendly and cost-effective, can be easily scaled up for production, and provides materials with good mechanical strength. The microporous polymeric spheres containing organo-clay (cloisite) showed a high surface area of similar to 80-370 m(2) g(-1) with a microsphere size of similar to 4.4 nm. These polymeric spherical beads were hydrophobic and thermally stable up to 300 degrees C. They showed high carbon dioxide uptake (up to similar to 20.7 wt\% at 273 K/1.0 bar) due to lone pair electrons of heteroatom, which might sharpen the interaction between the CO2 molecules and polymeric matrices through local dipole/quadruple interaction. Moreover, they showed good capacity to store CO2 due to the presence of quaternary ammonium groups in the clay and a large amount of narrow microspheres (B4.4 nm). The equilibrium CO2 capacities of the prepared spherical beads were due to the interaction between quaternary ammonium and the negatively charged oxygen atoms of CO2, and these spherical beads showed potential applications in gas adsorption and separation.}, doi = {10.1039/c7nj02141k}, author = {Nande, Smita S. and Garnaik, Baijayantimala} } @article {44159, title = {Orthogonally functionalized donor/acceptor homo- and heterodimeric dyes for dye-sensitized solar cells: an approach to introduce panchromaticity and control the charge recombination}, journal = {ACS Applied Materials \& Interfaces}, volume = {9}, year = {2017}, month = {OCT}, pages = {34875-34890}, type = {Article}, abstract = {Organic dyes possessing conjugated pi-framework forms closely packed monolayers on photoanode in dye-sensitized solar cell (DSSC), because of the limitation to control the orientation and the extend of intermolecular pi-pi interaction, self-aggregation of dyes leads to reduced cell performance. In this report, a series of homodimeric (D-1-D-1, and D-2,-D-2) and heterodimeric (D-1-D-2 and D-2-D-4) donor/acceptor (D/A) dyes containing spiroBiProDOT pi-spacer were designed and synthesized by utilizing Pd-catalyzed direct arylation reaction and correlates the device performance with monomeric dyes (D-1 and D-2). Both the thiophenes (pi-spacer) of spiroBiProDOT were functionalized with same or different donor groups which led to homodimeric and heterodimeric chromophores in a single sensitizer. The homodimeric spirodye D-1-D-1 showed higher power conversion efficiency (PCE), of 7.6\% with a V-oc and J(sc) of 0.672 V and 16.16 mA/cm(2), respectively. On the other hand, the monomeric D-1 exhibited a PCE of 3.2\% (V-oc of 0.64 V and J(sc) of 7.2 mA/cm(2)); which is lower by 2.4 fold compared to dimeric analogue. The spiro-unit 20 provides flexibility between the incorporated chromophores to orient on TiO2 due to four sp(3)-centers, which arrest the molecular motions after chemisorption. This study shows a new molecular approach to incorporate two chromophores in the dimeric dye possessing complementary absorption characteristics toward panchromatic absorption. The attenuated charge recombination at TiO2/Dye/redox couple interface in case of D-1-D-1, owing to better passivation of TiO2 surface, was elucidated through impedance analysis. The FT-IR spectrum of D,-D, adsorbed on TiO2 film indicated both the carboxylic units were involved in chemisorption which makes strong coupling between dye and TiO2.}, doi = {10.1021/acsami.7b09010}, author = {Sil, Manik Chandra and Sudhakar, Vediappan and Kavungathodi, Munavvar Fairoos Mele and Punitharasu, Vellimalai and Nithyanandhan, Jayaraj} } @article {44116, title = {Overcoming the lack of oral availability of cyclic hexapeptides: design of a selective and orally available ligand for the integrin alpha v beta 3}, journal = {Angewandte Chemie-International Edition}, volume = {56}, year = {2017}, month = {DEC}, pages = {16405-16409}, type = {Article}, abstract = {Ahighly systematic approach for the development of both orally bioavailable and bioactive cyclic N-methylated hexapeptides as high affinity ligands for the integrin alpha v beta 3 is based on two concepts: a) screening of systematically designed libraries with spatial diversity and b) masking of the peptide charge with a lipophilic protecting group. The key steps of the method are 1) initial design of a combinatorial library of Nmethylated analogues of the stem peptide cyclo(d-Ala-Ala(5)); 2) selection of cyclic peptides with the highest intestinal permeability; 3) design of sublibraries with the bioactive RGD sequence in all possible positions; 4) selection of the best ligands for RGD-recognizing integrin subtypes; 5) finetuning of the affinity and selectivity by additional Ala to Xaa substitutions; 6) protection of the charged functional groups according to the prodrug concept to regain intestinal and oral permeability; 7) proof of biological effects in mice after oral administration.}, doi = {10.1002/anie.201709709}, author = {Weinmueller, Michael and Rechenmacher, Florian and Marelli, Udaya Kiran and Reichart, Florian and Kapp, Tobias G. and Raeder, Andreas F. B. and Di Leva, Francesco Saverio and Marinelli, Luciana and Novellino, Ettore and Munoz-Felix, Jose M. and Hodivala-Dilke, Kairbaan and Schumacher, Adi and Fanous, Joseph and Gilon, Chaim and Hoffman, Amnon and Kessler, Horst} } @article {43309, title = {Panchromatic sensitizer for dye-sensitized solar cells: un-symmetrical squaraine dyes incorporating benzodithiophene π-spacer with alkyl chains to extend conjugation, control the dye assembly on TiO2 and retard charge recombination}, journal = {Journal of Organic Chemistry}, volume = {82}, year = {2017}, month = {JAN}, pages = {1920{\textendash}1930}, abstract = {Metal-free near-infrared (NIR) active unsymmetrical squaraine dyes, RSQ1 and RSQ2, with benzodithiophene (BDT) π-spacer and cyanoacrylic acid acceptor were synthesized by utilizing palladium catalyzed direct (hetero)arylation reaction. Methyl and 2-ethylhexyl groups were strategically placed at the BDT unit for RSQ1 and RSQ2 respectively, to investigate the effect of alkylated π-spacer on dye aggregation on the TiO2 surface and recombination reactions at TiO2/dye/electrolyte interface. These dyes have strong absorption ( ε>10(5) M(-1)cm(-1)) in near-infra red (NIR) region and exhibit similar optical and electrochemical properties as they have same conjugated framework. RSQ2 performed better than RSQ1 owing to its higher open-circuit voltage (Voc) and fill factor (ff) in spite of having comparable short-circuit current density (Jsc). The panchromatic incident photon-to-current conversion efficiency (IPCE) response was also observed for both the dyes. RSQ2 showed power conversion efficiency (PCE) of 6.72\% with short-circuit current density (Jsc) of 18.53 mA/cm(2), open circuit voltage (Voc) of 0.538 V, and fill factor (ff) of 67.4\%, without any co-adsorbent. Attenuation of the charge recombination for RSQ2 was revealed by electrochemical impedance analysis (EIS) and open-circuit potential decay transients (OCVD), which attributes to its higher Voc and ff in comparison to RSQ1. }, doi = {10.1021/acs.joc.6b02670}, author = {Bisht, Rajesh and Munavvar, Fairoos Mk and Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {42969, title = {Phenothiazine-based D-A-π-A dyes for highly efficient dye sensitized solar cells: effect of internal acceptor and non-conjugated π-spacer on device performance}, journal = {ChemPlusChem}, volume = {82}, year = {2017}, month = {FEB}, pages = {280-286}, abstract = {Three new D-A-pi-A metal-free organic dyes based on phenothiazine as a donor (D) and non-conjugated pi-spacer were designed and synthesized. The incorporation of different {\textquoteright}internal acceptors{\textquoteright} (electron traps) such as benzothiadiazole (BTD), benzotriazole (BTA), and pyridine were shown to allow systematic tuning of the energy levels and the photophysical properties. The AI-1 dye showed lower electronic disorder compared with the other two dyes. The efficiencies achieved with AI-1, AI-2, and AI-3 dyes were 8.5\% (J(sc) = 15.42 mA cm(-2), V-oc = 0.78 V, FF = 68\%), 7\% (J(sc) = 12.8 mA cm(-2), V-oc = 0.78 V, FF = 68\%) and 6.7\% (J(sc) = 11.57 mA cm(-2), V-oc = 0.82 V, FF = 68.26 \%), respectively. The incorporation of non-conjugated phenothiazine as a p-spacer in D-A-pi-A dyes showed remarkable enhancement in the photovoltaic performance of dye-sensitized solar cell (DSSC) devices. The sealed DSSC devices with iodide/tri-iodide (I-/I-3(-) @)based liquid electrolyte showed promising stability under ambient conditions.}, doi = {10.1002/cplu.201600492}, author = {Nagane, Satyawan and Ichake, Amol and Agrawal, Ishita and Sadhanala, Aditya and Friend, Richard H. and Ogale, Satishchandra and Wadgaonkar, Prakash P.} } @article {43377, title = {Poly(ether urethane)s from aromatic diisocyanates based on lignin-derived phenolic acids}, journal = {Polymer International}, year = {2017}, month = {JAN}, doi = {10.1002/pi.5333}, author = {Kuhire, Sachin and Nagane, Samadhan S. and Wadgaonkar, Prakash} } @article {45765, title = {Polymorphism, isostructurality and physicochemical properties of glibenclamide salts}, journal = {CrystEngComm}, volume = {19}, year = {2017}, month = {FEB }, pages = {918-929}, type = {Article}, abstract = {

Novel salts of glibenclamide (GBA), namely glibenclamide-sodium (GBA-Na), glibenclamide-potassium (GBA-K) and glibenclamide-ammonium (GBA-NH4) were crystallized under different conditions to obtain their polymorphs, and their aqueous solubility and hydration stability studies are reported. The GBA-Na salt is dimorphic (forms I and II)and also exists as hydrate GBA-Na-H2O (form III). The GBA-K salt exists in anhydrous and hydrate forms (GBA-K, forms I and II). Crystal structure analysis of GBA-Na forms I and II showed differences in geometry of the central metal atom and ligand orientation. This kind of polymorphism of sulfonyl urea salts appears to be novel in the Cambridge Structural Database (CSD). The iso-structurality of GBA-Na form I with GBA-NH4 and GBA-K form I salts is discussed. The potassium salts of GBA exhibited higher solubility compared to pure GBA. Specifically GBA-K salt forms I and II showed higher solubility by 77 fold in the water and 33 fold in phosphate buffer (pH 7) compared to the other salts. Dynamic vapor sorption (DVS) showed reversible water sorption without hysteresis for all salts, except for GBA-K form II which transformed to form I after a sorption and desorption cycle as confirmed by PXRD.

}, issn = {1466-8033}, doi = {10.1039/c6ce02295b}, author = {Suresh, Kuthuru and Khandavilli, U. B. Rao and Gunnam, Anilkumar and Nangia, Ashwini} } @article {43972, title = {Preparation of MgO supported platinum nanoparticle catalyst using toluene dispersed platinum sol}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {874-91}, type = {Journal Article}, abstract = {

An effective way of anchoring Pt nanoparticles on MgO using toluene dispersed platinum nanoparticles (Pt-NPs) as one of the ingredient is demonstrated. The usage of particles dispersed in toluene allows the retention of size and size distribution of preformed Pt-NPs even after deposition on MgO support with high active surface area, which is crucial for heterogeneous catalysis. The catalyst thus prepared, displayed selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with high turn on frequency (TOF - 105 h-1) with respect to the total Pt content. We attribute this efficient catalytic performance to the uniform distribution and deposition of Pt on the active MgO support and its better accessible surface as evidenced by the cyclic-voltammetry results.

}, keywords = {catalysis, Catalysts, cyclic voltammetry, Deposition, Magnesia, Nanoparticles, sol-gel process}, doi = {10.1016/j.apsusc.2016.12.058}, author = {Seth, J. and Nepak, D. and Chaudhari, V. R. and Prasad, B.L.V.} } @article {43263, title = {Quinolidene based monocarbonyl curcumin analogues as promising antimycobacterial agents: synthesis and molecular docking study}, journal = {Bioorganic \& medicinal chemistry letters}, volume = {27}, year = {2017}, month = {FEB}, pages = { 922-928}, abstract = {

A series of quinoline incorporated monocarbonyl curcumin analogues was efficiently synthesized using [HDBU][HSO4] as catalyst via Knoevenagel type condensation and evaluated for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB) and Mycobacterium bovis BCG in dormant state. The analogues 3e, 3h, 4a and 4e exhibited very good antitubercular activity. The antiproliferative activity of the analogues against MCF-7, A549 and HCT-116 cell lines was evaluated using modified MTT assay and these compounds were found to be non-cytotoxic. Molecular docking study has been carried out against M. tuberculosis pantothenate synthetase (MTB PS) enzyme in an effort to enhance the understanding of their action as antitubercular agents. The potency, low cytotoxicity and selectivity of these analogues support them as valid leads for further optimization.

}, doi = {10.1016/j.bmcl.2017.01.004}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nawale, Laxman U. and Sarkar, Dhiman and Khedkar, Vijay M. and Shingate, Bapurao B.} } @article {42939, title = {Quinolidene-rhodanine conjugates: facile synthesis and biological evaluation}, journal = {European Journal of Medicinal Chemistry}, volume = {125}, year = {2017}, month = {JAN}, pages = {385{\textendash}399}, type = {Article}, abstract = {

A series of rhodanine incorporated quinoline derivatives were efficiently synthesized using reusable DBU acetate as ionic liquid and evaluated for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB) (ATCC 25177) and Mycobacterium bovis BCG (ATCC 35743) both in active and dormant state. Compounds 3e, 3f, 3g, 3h and 3i exhibited very good antitubercular activity. The active compounds were studied for cytotoxicity against HUVEC, THP-1, macrophages, A549, PANC-1 and HeLa cell lines using modified MTT assay and were found to be noncytotoxic. Inactivity of all these compounds against Gram positive and Gram negative bacteria indicates their specificity towards the MTB. Further, the synthesized compounds have been screened for their in vitro antifungal activity. In addition, the molecular docking studies revealed the binding modes of these compounds in active site of Zmp1 enzyme, which in turn helped to establish a structural basis of inhibition of mycobacteria. The results of present study clearly indicate the identification of some novel, selective and specific inhibitors against MTB that can be explored further for potential antitubercular drug.

}, doi = {10.1016/j.ejmech.2016.09.059}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Shingate, Bapurao B. and Nawale, Laxman and Sarkar, Dhiman and Khedkar, Vijay M. and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N.} } @article {43998, title = {Removal of endrin and dieldrin isomeric pesticides through stereoselective adsorption behavior on the graphene oxide-magnetic nanoparticles}, journal = {Environmental Science and Pollution Research}, year = {2017}, month = {SEP}, pages = {1-9}, type = {Article in Press}, abstract = {

A novel stereoselective removal behavior of isomeric endrin and dieldrin pesticides from sample solution is demonstrated using nanocomposite of graphene oxide (GO) and iron oxide (Fe3O4) magnetic nanoparticles (MNPs). The removal efficiency of endrin and dieldrin was found higher when GO-MNPs was used as a separating probe than the individual use of GO and MNPs. The removal efficiency of both the pesticides was found to be more favorable when the dosage amount of GO-MNPs was 30 mg for 30-min contact time with pH 4.0 at room temperature. The good correlation of determination (R2) with 0.975 and 0.973 values obtained for endrin and dieldrin, respectively demonstrated a well fitting of Langmuir adsorption isotherm model. The higher removal percentage (86.0\%) and higher slope value of Langmuir adsorption isotherm were estimated for endrin compared to dieldrin (74.0\%). The reason for higher adsorption percentage of endrin is due to the endo-position of oxygen atom in molecule favors more interaction of molecules with GO-MNPs compared to the exo-position of oxygen present in dieldrin. In addition, the higher value of R2 for endrin and dieldrin demonstrated better suitability of pseudo-first-order and pseudo-second-order kinetic models, respectively. The advantages of the present method are use of simple UV-vis spectrophotometry for monitoring and low-cost use of GO-MNPs nanomaterial for the removal of pesticides from sample solution. {\textcopyright} 2017 Springer-Verlag GmbH Germany

}, keywords = {Dieldrin, Endrin, Isomeric Pesticides, Removal}, doi = { 10.1007/s11356-017-0159-z}, author = {Shrivas, K. and Ghosale, A. and Nirmalkar, N. and Srivastava, A and Singh, S. K. and Shinde, S. S.} } @article {43782, title = {Review on cellulose and lignin based binders and electrodes: Small steps towards a sustainable lithium ion battery}, journal = {International Journal of Biological Macromolecules}, volume = {103}, year = {2017}, month = {OCT}, pages = {1032-1043}, type = {Article}, abstract = {Lithium ion batteries (LIB) are the most promising energy storage systems for portable electronics and future electric or hybrid-electric vehicles. However making them safer, cost effective and environment friendly is the key challenge. In this regard, replacing petro-derived materials by introducing renewable biomass derived cellulose derivatives and lignin based materials into the battery system is a promising approach for the development of green materials for LIB. These biomaterials introduce sustainability as well as improved safety in the final disposal of LIB batteries. In this review we introduce LIB materials technology in brief and recent developments in electrodes and binders based on cellulose and their derivatives and lignin for lithium ion batteries. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.ijbiomac.2017.05.155}, author = {Nirmale, Trupti C. and Kale, Bharat B. and Varma, Anjani J.} } @article {43725, title = {Rigid peptide scaffold-incorporated structural analogs of the potent antidepressant peptide drug rapastinel (GLYX-13)}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {APR}, pages = {3594-3596}, type = {Article}, abstract = {

Rapastinel (GLYX-13) is a natural amidated tetrapeptide (Thr-Pro-Pro-Thr-NH2)endowed with strong antidepressant property. Rapastinel shows considerable promise for treating drug-resistant major depressive disorder (MDD), and is under clinical phase III development. Herein, we report the synthesis of a novel class of analogues of the potent antidepressant peptide drug rapastinel featuring rigid dipeptide scaffolds comprising proline (L/D) and amino thiophene carboxylates (Atc). Amino thiophene carboxylate is a conformationally constrained aromatic beta-amino acid, known to rigidify peptide backbones thereby limiting the conformational flexibility of peptides and improving proteolytic stability.

}, doi = {10.1002/slct.201700605}, author = {Nadimpally, Krishna Chaitanya and Chakrapani, Aswathi and Prabhu, Priyanka J. and Madica, Krishnaprasad and Sanjayan, Gangadhar J.} } @article {44109, title = { Role of the pair correlation function in the dynamical transition predicted by mode coupling theory}, journal = {Physical Review Letters}, volume = {119}, year = {2017}, month = {DEC}, type = {Article}, abstract = {In a recent study, we have found that for a large number of systems the configurational entropy at the pair level S-c2, which is primarily determined by the pair correlation function, vanishes at the dynamical transition temperature T-c. Thus, it appears that the information of the transition temperature is embedded in the structure of the liquid. In order to investigate this, we describe the dynamics of the system at the mean field level and, using the concepts of the dynamical density functional theory, show that the dynamical transition temperature depends only on the pair correlation function. Thus, this theory is similar in spirit to the microscopic mode coupling theory (MCT). However, unlike microscopic MCT, which predicts a very high transition temperature, the present theory predicts a transition temperature that is similar to T-c. This implies that the information of the dynamical transition temperature is embedded in the pair correlation function.}, doi = {10.1103/PhysRevLett.119.265502}, author = {Nandi, Manoj Kumar and Banerjee, Atreyee and Dasgupta, Chandan and Bhattacharyya, Sarika Maitra} } @article {43726, title = {Secondary interactions arrest the hemiaminal intermediate to invert the modus operandi of schiff base reaction: a route to benzoxazinones}, journal = {Journal of Organic Chemistry}, volume = {82}, year = {2017}, month = {APR}, pages = {4342-4351}, type = {Article}, abstract = {Discovered by Hugo Schiff, condensation between amine and aldehyde represents one of the most ubiquitous reactions in chemistry. This classical reaction is widely used to manufacture pharmaceuticals and fine chemicals. However, the rapid and reversible formation of Schiff base prohibits formation of alternative products, of which benzoxazinones are an important class. Therefore, manipulating the reactivity of two partners to invert the course of this reaction is an elusive target. Presented here is a synthetic strategy that regulates the sequence of Schiff base reaction via weak secondary interactions. Guided by the computational models, reaction between 2,3,4,5,6-pentafluoro-benzaldehyde with 2-amino-6methylbenzoic acid revealed quantitative (99\%) formation of 5-methyl-2-(perfluoropheny01,2-dihydro-4H-benzo[d][1,3]oxazin-4-one (15). Electron donating and electron withdrawing ortho-substituents on 2-aminobenzoic acid resulted in the production of benzoxazinones 936. The mode of action was tracked using low temperature NMR, IN vis spectroscopy, and isotopic (O-18) labeling experiments. These spectroscopic mechanistic investigations revealed that the hemiaminal intermediate is arrested by the hydrogen-bonding motif to yield benzoxazinone. Thus, the mechanistic investigations and DFT calculations categorically rule out the possibility of in situ imine formation followed by ring-closing, but support instead hydrogen-bond assisted ring-closing to prodrugs. This unprecedented reaction represents an interesting and competitive alternative to metal catalyzed and classical methods of preparing benzoxazinone.}, doi = {10.1021/acs.joc.7b00352}, author = {Patel, Ketan and Deshmukh, Satej S. and Bodkhe, Dnyaneshwar and Mane, Manoj and Vanka, Kumar and Shinde, Dinesh and Rajamohanan, Pattuparambil R. and Nandi, Shyamapada and Vaidhyanathan, Ramanathan and Chikkali, Samir H.} } @conference {45710, title = {Solubility limits of ceria-zirconia-lanthana solid-solutions}, booktitle = {International Conference on Recent Trends in Engineering and Material Sciences (ICEMS)}, year = {2017}, month = {MAR}, publisher = {Elsevier Science BV, PO BOX 211, 1000 AE Amsterdam, Netherlands}, organization = {Elsevier Science BV, PO BOX 211, 1000 AE Amsterdam, Netherlands}, address = {Jaipur, India}, abstract = {

We demonstrate, the solubility limits of Ceria-Zirconia-Lanthana (CZLa) solid-solutions with the increase in heat-treatment temperature from 600 degrees C to 1300 degrees C. CZLa nano-crystalline samples were successfully synthesized by EDTA-Citrate complex method and were characterized by Raman Spectroscopy (RS) and Transmission Electron Microscopy (TEM) analysis. With an increase in temperature, it is noticed that the solubility limit is decreased in CZLa system. At 600 degrees C, a very good solubility is observed in CZLa system and is confirmed from RS analysis. At higher heat-treatment temperatures (1000 and 1300 degrees C), with an increase in La content, Zr precipitated in the CZLa system and is confirmed from RS analysis. The reason for such kind of behavior in this CZLa system is clearly explained in this work. (C) 2017 Elsevier Ltd. All rights reserved.

}, keywords = {Ceria-Zirconia Lanthana, EDTA-Citrate method, Raman spectroscopy, solubility limit, XRD}, author = {Abbas, Zenab and Surendran, Mythili and Anjana, P. A. and Jidev, P. K. and Dasari, Harshini and Naidu, Sudhakar N. and Anandhan, S. and Bhat, Udaya K. and Babu, Uday Bhaskar G. and Dasari, Hari Prasad} } @article {43818, title = {Supramolecular synthons in bumetanide cocrystals and ternary products}, journal = {Crystal Growth \& Design}, volume = {17}, year = {2017}, month = {AUG}, pages = {4225-4236}, type = {Article}, abstract = {A novel design strategy for cocrystals of the diuretic sulfonamide drug bumetanide (BUM) with carboxamides is reported based on reliable supramolecular synthons. Binary cocrystals of BUM with pyridine carboxamides, pyridones, and cytosine were obtained by solvent assisted grinding followed by solution crystallization. All cocrystal structures exhibit hydrogen bonding of the coformer with the carboxylic acid group of BUM via heterosynthons which replace the acid homodimer in the drug crystal structure. Pyridones are inserted as N-H center dot center dot center dot O dimers which are in turn bonded to the acid group of BUM, while the pyridine amide coformers interact via the acid amide heterosynthon. Cocrystal polymorphs were obtained for bumetanide isonicotinamide cocrystal structure with the sulfonamide pyridine and sulfonamide acid synthons. Careful crystal packing analysis of BUM structure and nine new binary adducts gave an idea for the design ternary cocrystals, and subsequently four new ternary crystalline products were crystallized. Whereas the binary cocrystal structures were confirmed by single crystal diffraction, the ternary combinations were chatacterized by their unique powder X-ray diffraction patterns as well as by thermal and spectroscopic techniques.}, doi = {10.1021/acs.cgd.7b00531}, author = {Allu, Suryanarayana and Bolla, Geetha and Tothadi, Srinu and Nangia, Ashwini} } @article {43671, title = {Synthesis and antimycobacterial screening of new thiazolyl-oxazole derivatives}, journal = {European Journal of Medicinal Chemistry}, volume = {132}, year = {2017}, month = {MAY}, pages = {333-340}, type = {Article}, abstract = {

In the present study a series of 4-methyl-2-aryl-5-(2-aryl/benzyl thiazol-4-yl) oxazole (4a-v) have been synthesized and evaluated for their preliminary antitubercular, antimicrobial and cytotoxicity activity. Among all the synthesized compounds, 4v reported comparable activity against dormant M. tuberculosis H37Ra and M. bovis BCG strains with respect to standard drug rifampicin. The active compounds from the antitubercular study were further tested for anti-proliferative activity against HeLa, A549 and PANC-1 cell lines using MU assay and showed no significant cytotoxic activity at the maximum concentration evaluated. Further, the synthesized compounds were found to have potential antibacterial activities with MIC range of 2.1-26.8 mu g/mL. High potency, lower cytotoxicity and promising antimycobacterial activity suggested that these compounds could serve as good leads for further optimisation and development. (C) 2017 Elsevier Masson SAS. All rights reserved.

}, doi = {10.1016/j.ejmech.2017.03.065}, author = {Abhale, Yogita K. and Sasane, Amit V. and Chavan, Abhijit P. and Shekh, Saddam Husen and Deshmukh, Keshav K. and Bhansali, Sujit and Nawale, Laxman and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {43266, title = {Synthesis and biological evaluation of 1,2,4-triazole-3-thione and 1,3,4-oxadiazole-2-thione as anti-mycobacterial agents}, journal = {Chemical Biology \& Drug Design}, volume = {90}, year = {2017}, month = {JAN}, pages = {200-209}, type = {Article}, abstract = {Resistance among dormant mycobacteria leading to multi-drug resistant (MDR) and extremely-drug resistant(XDR) tuberculosis is one of the major threats. Hence, a series of 1,2,4-triazole-3-thione and 1,3,4-oxadiazole-2-thione derivatives (4a-5c) have been synthesised and screened for their anti-tubercular activity against Mycobacterium tuberculosis H37Ra (H37Ra). Thetriazolethiones4b and 4v showed high anti-tubercular activity (both MIC and IC50) against the dormant H37Ra by in vitro and ex vivo. They were shown to have more specificity towards mycobacteria than other gram-negative and gram- positive pathogenic bacteria. The cytotoxicity was almost insignificant up to 100 μg/mL against THP-1, A549 and PANC-1 human cancer cell lines, and solubility was high in aqueous solution, indicating the potential of developing these compounds further as novel therapeutics against tuberculosis infection.}, doi = {10.1111/cbdd.12939}, author = {Sonawane, Amol and Rode, Navnath D. and Nawale, Laxman U. and Joshi, Rohini R. and Joshi, Ramesh A. and Likhite, Anjali P. and Sarkar, Dhiman} } @article {42938, title = {Synthesis and biological evaluation of new fluconazole β-lactam conjugates linked via 1,2,3-triazole}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {FEB}, pages = {470-479}, abstract = {

Novel 1,2,3-triazole-linked β-lactam{\textendash}fluconazole conjugates 12(a{\textendash}l) were designed and synthesized. The compounds showed potent antifungal activity against two pathogenic Candida strains; Candida albicans ATCC 24433 and Candida albicans ATCC 10231 with MIC values in the range of 0.0625{\textendash}2 μg mL-1. Compounds 12h, 12j and 12k showed promising antifungal activity against all the tested fungal pathogens except C. neoformans ATCC 34554 compared to fluconazole. Compound 12j in which the β-lactam ring was formed using para-anisidine and benzaldehyde was found to be more potent than fluconazole against all the fungal strains with an IC50 value of \<0.015 μg mL-1 for Candida albicans (ATCC 24433). Mechanistic studies for active compounds revealed that the antifungal action was due to ergosterol inhibition. Compounds 12h and 12j at a concentration of 0.125 μg mL-1 caused 91.5 and 96.8\% ergosterol depletion, respectively, compared to fluconazole which at the same concentration caused 49\% ergosterol depletion. The molecular docking study revealed that all the fluconazole β-lactam conjugates 12(a{\textendash}l) could snugly fit into the active site of lanosterol 14α-demethylase (CYP51) with varying degrees of affinities. As anticipated, the binding energy for compound 12j (-58.961 kcal mol-1) was much smaller than that for fluconazole (-52.92 kcal mol-1). The synthesized compounds have therapeutic potential for the control of candidemia.

}, doi = {10.1039/C6NJ03117J}, author = {Divse, Jaisingh M. and Mhaske, Santosh B. and Charolkar, Chaitanya R. and Sant, Duhita G. and Tupe, Santosh G. and Deshpande, Mukund V. and Khedkar, Vijay M. and Nawale, Laxman U. and Sarkar, Dhiman and Pore, Vandana S.} } @article {44041, title = {Synthesis, antimycobacterial screening and molecular docking studies of 4-aryl-4'-methyl-2'-aryl-2,5'-bisthiazole derivatives}, journal = {Medicinal Chemistry Research}, year = {2017}, month = {JUL}, type = {Article}, abstract = {A series of 4-aryl-4'-methyl-2'-aryl-2,5'-bisthia- zole derivatives (5a{\textendash}o) were synthesized and screened for inhibitory activity against Mycobacterium tuberculosis H37Ra (ATCC 25177) and Mycobacterium bovis BCG (ATCC 35743) strains. Five lead compounds (5e, 5f, 5g, 5h, and 5o) were further confirmed from their dose dependent effect against MTB and Bovine{\textendash}Calmette{\textendash}Guerin. The most promising compounds 5f (MIC90: 11.32 μg/mL), 5h (MIC90: 11.59 μg/mL), and 5o (MIC90: 23.64 μg/mL) showed strong antitubercular activity against dormant MTB and BCG as well as almost insignificant cytotoxicity up to 100μg/mL against HeLa, A549, and PANC-1 human cancer cell lines. Further, the synthesized compounds were found to have potential antibacterial activity against Gram-negative bac- teria, Escherichia coli, Pseudomonas flurescence and Gram- positive bacteria, Staphylococcus aureus, Bacillus subtilis. Most of the synthesized compounds showed moderateactivity against fungal strain Candida albicans. Molecular docking studies of these compounds showed significant interactions with crystal structure of the cytochrome P45014α-sterol demethylase (CYP51) PDB ID: 1E9X. Hydrogen bond interactions with SER261 and VAL395 are important interactions for selective inhibition of designed inhibitors. Compounds 5f, 5h, and 5o showed significant interactions with 1E9X. All the experimental results promote us to consider this series as a starting point for the devel- opment of novel, selective and more potent antitubercular agents in the future.}, doi = {10.1007/s00044-017-1988-5}, author = {Abhale, Yogita K. and Shinde, Abhijit D. and Deshmukh, Keshav K. and Nawale, Laxman U. and Sarkar, Dhiman and Choudhari, Prafulla B. and Kumbhar, Santosh S. and Mhaske, Pravin C.} } @article {43971, title = {Synthesis, antitubercular and antimicrobial potential of some new thiazole substituted thiosemicarbazide derivatives}, journal = {Medicinal Chemistry Research}, volume = {26}, year = {2017}, month = {JUN}, chapter = {2557-2567}, abstract = {

The increase in antibiotic resistance due to multiple factors has warranted the need for the search of new compounds which are active against multidrug resistant pathogens. In this context a small focused library of thiosemicarbazide derivatives of 2-arylthiazole-4-carbaldehyde, 4-methyl-2-arylthiazole-5-carbaldehyde and 1-(4-methyl-2-arylthiazol-5-yl) ethanone, (5a{\textendash}l) has been synthesized. The title compounds were screened for inhibitory activity against Mycobacterium tuberculosis H37Ra (ATCC 25177) and Mycobacterium bovis Bacille Calmette Guerin (ATCC 35743) strains. The synthesized compounds, 5a{\textendash}l were further assayed for their cytotoxic activity against the two human cancer cell lines, HeLa and human colon carcinoma 116 cell lines and showed no significant cytotoxic activity against these two cell lines at the maximum concentration evaluated. Further, the synthesized compounds were found to have potential antibacterial activity against Gram-negative bacteria, Escherichia coli, Pseudomonas flurescence and Gram-positive bacteria, Staphylococcus aureus, Bacillus subtilis. Most of the synthesized compounds showed moderate activity against fungal strain Candida albicans. This study provides valuable directions to our ongoing endeavor of rationally designing more potent antimycobacterial agent. {\textcopyright} 2017, Springer Science+Business Media, LLC.

}, keywords = {Antimicrobial activity, Antitubercular activit, Cytotoxicity, Thiazole, Thiosemicarbazide}, issn = {1054-2523}, doi = {10.1007/s00044-017-1955-1}, author = {Abhale, Y. K. and Shinde, A. and Deshmukh, K. K. and Nawale, L. and Sarkar, D. and Mhaske, P. C.} } @article {44091, title = {Synthesis, biological evaluation, and molecular docking studies of novel 3-aryl-5-(alkyl-thio)-1H-1,2,4-triazoles derivatives targeting Mycobacterium tuberculosis}, journal = {Chemical Biology \& Drug Design}, volume = {90}, year = {2017}, month = {DEC}, pages = {1206-1214}, type = {Article}, abstract = {A small library of new 3-aryl-5-(alkyl-thio)-1H-1,2,4-triazoles was synthesized and screened for the antimycobacterial potency against Mycobacterium tuberculosis H37Ra strain and Mycobacterium bovis BCG both in active and dormant stage. Among the synthesized library, 25 compounds exhibited promising anti-TB activity in the range of IC(50)0.03-5.88g/ml for dormant stage and 20 compounds in the range of 0.03-6.96g/ml for active stage. Their lower toxicity (>100g/ml) and higher selectivity (SI=>10) against all cancer cell lines screened make them interesting compounds with potential antimycobacterial effects. Furthermore, to rationalize the observed biological activity data and to establish a structural basis for inhibition of M.tuberculosis, the molecular docking study was carried out against a potential target MTB CYP121 which revealed a significant correlation between the binding score and biological activity for these compounds. Cytotoxicity and in vivo pharmacokinetic studies suggested that 1,2,4-triazole analogues have an acceptable safety index, in vivo stability and bio-availability.}, doi = {10.1111/cbdd.13040}, author = {Rode, Navnath D. and Sonawane, Amol D. and Nawale, Laxman and Khedkar, Vijay M. and Joshi, Ramesh A. and Likhite, Anjali P. and Sarkar, Dhiman and Joshi, Rohini R.} } @article {43526, title = {Synthesis of extended conjugated indolyl chalcones as potent anti-breast cancer, anti-inflammatory and antioxidant agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {27}, year = {2017}, month = {APR}, pages = {1502-1507}, abstract = {In the present investigation, synthesis of a series of extended conjugated delta-chloro-alpha-cyano substituted indolyl chalcones (5a-p) was accomplished by reacting 3-cyanoacetylindole 2 with 3-chloro-3-phenylpropenal 4 in the presence of piperidine. The structural interpretations of newly synthesized compounds were based on chemical and spectroscopic evidences. Anti-tumor evaluation of the synthesized compounds in vitro against MCF-7 (breast carcinoma) cell line revealed that they possess high anti-tumor activities. Among them, compound 5e and 5a demonstrated excellent activity against breast carcinoma (GI(50) <0.1 and mu M respectively) as good as adriamycin (GI(50) <0.1 mu M). The compounds were also screened against the normal Vero monkey cell line, which showed moderate selectivity against inhibition of cancer cells. The effect of extended conjugation on activity authenticated by comparing activity profile of compound 5a, 5i and 5m with their simple analogues. Among the synthesized compounds, 5i and 51 were found to be active anti-inflammatory agents in addition to having noteworthy antioxidant potential. These results suggest the possible use of these compounds for the design and development of novel anti breast cancer agents. (C) 2017 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.bmcl.2017.02.052}, author = {Bhale, Pravin S. and Chavan, Hemant V. and Dongare, Sakharam B. and Shringare, Sadanand N. and Mule, Yoginath B. and Nagane, Samadhan S. and Bandgar, Babasaheb P.} } @article {42943, title = {Synthesis of novel triazole-incorporated isatin derivatives as antifungal, antitubercular, and antioxidant agents and molecular docking study}, journal = {Journal of Heterocyclic Chemistry}, volume = {54}, year = {2017}, month = {JAN}, type = {Article}, abstract = {

A library of 1,2,3-triazoles efficiently prepared via click chemistry and evaluated for their antifungal, antitubercular, antioxidant, cytotoxicity, molecular docking and ADME prediction.

}, doi = {10.1002/jhet.2598}, author = {Shaikh, Mubarak H. and Subhedar, Dnyaneshwar D. and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash N. and Nawale, Laxman and Arkile, Manisha A. and Sarkar, Dhiman and Shingate, Bapurao B.} } @article {44166, title = {Synthetic manipulation of hybrid perovskite systems in search of new and enhanced functionalities}, journal = {ChemSusChem}, volume = {10}, year = {2017}, month = {OCT}, pages = {3722-3739}, type = {Article}, abstract = {Over the past few years the organic-inorganic hybrid perovskite systems have emerged as a promising class of materials for photovoltaic and electroluminescent thin-film device applications, in view of their unique set of tunable optoelectronic properties. Importantly, these materials can be easily solution-processed at low temperatures and as such are amenable to facile molecular engineering. Thus, a variety of low-dimensional forms and quantum structures of these materials can be obtained through strategic synthetic manipulations through small molecule incorporation or molecular ion doping. In this Minireview, we specifically focus on these approaches and outline the possibilities of utilizing these for enhanced functionalities and newer application domains.}, doi = {10.1002/cssc.201701093}, author = {Naphade, Rounak and Nagane, Satyawan and Bansode, Umesh and Tathavadekar, Mukta and Sadhanala, Aditya and Ogale, Satishchandra} } @article {44137, title = {Thermomechanical effect in molecular crystals: the role of halogen-bonding interactions}, journal = {IUCRJ}, volume = {4}, year = {2017}, month = {NOV}, pages = {812-823}, type = {Article}, abstract = {The design and synthesis of mechanically responsive materials is interesting because they are potential candidates to convert thermal energy into mechanical work. Reported in this paper are thermosalient effects in a series of halogen derivatives of salinazids. The chloro derivative, with higher electronegativity and a weaker inter-halogen bond strength (Cl center dot center dot center dot Cl) exhibits an excellent thermal response, whereas the response is weaker in the iodo derivative with stronger I center dot center dot center dot I halogen bonding. 3,5-Dichlorosalinazid (Compound-A) exists in three polymorphic forms, two room-temperature polymorphs (Forms I and II) and one high-temperature modification (Form III). The transformation of Form I to Form III upon heating at 328-333 K is a reversible thermosalient transition, whereas the transformation of Form II to Form III is irreversible and nonthermosalient. 3,5-Dibromo- (Compound-B) and 3-bromo-5-chloro(Compound-C) salinazid are both dimorphic: the Form I to Form II transition in Compound-B is irreversible, whereas Compound-C shows a reversible thermosalient effect (362-365 K). In the case of 3,5-diiodosalinazid (CompoundD) and 3,5-difluorosalinazid (Compound-E), no phase transitions or thermal effects were observed. The thermosalient behaviour of these halosalinazid molecular crystals is understood from the anisotropy in the cell parameters (an increase in the a axis and a decrease in the b and c axes upon heating) and the sudden release of accumulated strain during the phase transition. The dihalogen salinazid derivatives (chlorine to iodine) show a decrease in thermal effects with an increase in halogen-bond strength. Interestingly, Compound-B shows solid-state photochromism in its polymorphs along with the thermosalient effect, wherein Form I is cyan and Form II is light orange.}, doi = {10.1107/S2052252517014658}, author = {Mittapalli, Sudhir and Perumalla, D. Sravanakumar and Nanubolu, Jagadeesh Babu and Nangia, Ashwini} } @article {43859, title = {Validity of the Rosenfeld relationship: a comparative study of the network forming NTW model and other simple liquids}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {JUL}, pages = {793-800}, type = {Article}, abstract = {In this paper we explore the validity of the Rosenfeld and the Dzugutov relation for the Lennard-Jones (LJ) system, its repulsive counterpart, the WCA system and a network forming liquid, the NTW model. We find that for all the systems both the relations are valid at high temperature regime with an universal exponent close to 0.8. Similar to that observed for the simple liquids, the LJ and the WCA systems show a breakdown of the scaling laws at the low temperature regime. However for the NTW model, which is a simple liquid, these scaling laws are valid even at lower temperature regime similar to that found for ionic melts. Thus we find that the NTW model has mixed characteristics of simple liquids and ionic melts. Our study further reveals a quantitative relationship between the Rosenfeld and the Arrhenius relations. For strong liquids, the validity of the Rosenfeld relation in the low temperature regime is connected to it following the Arrhenius behaviour in that regime. Finally we explore the role of pair entropy and residual multiparticle entropy in the dynamics as a function of fragility of the systems.}, doi = {10.1007/s12039-0}, author = {Banerjee, Atreyee and Nandi, Manoj Kumar and Bhattacharyya, Sarika Maitra} } @article {45688, title = {Visible-light active catechol-metal oxide carbonaceous polymeric material for enhanced photocatalytic activity}, journal = {Journal of Materials Chemistry A}, volume = {5}, year = {2017}, month = {JAN}, pages = {384-396}, type = {Article}, abstract = {

esigning new materials for sustainable energy and environmental applications is one of the prime focuses in chemical science. Here, an unprecedented visible-light active catechol-TiO2 carbonaceous polymer based organic-inorganic hybrid material was synthesized by a photosynthetic route. The visible light induced (\> 400 nm) photosynthetic polymerization of catechol led to the formation of carbonaceous polymeric deposits on the surface of TiO2. The band gap energy of hybrids was shifted to the visible region by orbital hybridization between 3d(Ti) of TiO2 and 2p(O), pi(C) of catechol. The Tauc plot clearly revealed that 1.0 wt\% catechol-TiO2 carbonaceous polymer remarkably tailored the optical band gap of TiO2 from 3.1 eV to 1.9 eV. The synthesized hybrid materials were thoroughly characterized and their photocatalytic activity was evaluated towards toxic Cr(VI) to relatively less toxic Cr(III) reduction under visible light irradiation (\> 400 nm), and solar light-driven H-2 production through water splitting. Very interestingly, the hybrid material showed 5- and 10-fold enhanced activity for photocatalytic Cr(VI) reduction and solar light-driven H-2 production respectively compared with pure TiO2. Moreover, the hybrid materials showed enhanced stability during photocatalysis. Thus, the simple photosynthetic strategy for developing light harvesting organic-inorganic hybrid materials can open up potential applications in energy and environmental remediation.

}, doi = {10.1039/c6ta07685h}, author = {Karthik, P. and Vinoth, R. and Selvam, P. and Balaraman, E. and Navaneethan, M. and Hayakawa, Y. and Neppolian, B.} } @article {43936, title = {Vitro study of novel microparticle based silk fibroin scaffold with osteoblast-like cells for load-bearing osteo-regenerative applications}, journal = {RSC Advances}, volume = {7}, year = {2017}, month = {MAY}, pages = {26551 - 26558}, type = {Article}, abstract = {Silk Fibroin (SF) is today considered to be one of the most favorable materials for bone tissue engineering. We have prepared novel SF microparticle based 3D scaffolds, with appropriate pore size, pore interconnectivity and porosity, excellent mechanical properties and tunable bioresorption, while retaining the inherent biocompatibility of SF. These properties make them ideal candidates for osteoregenerative applications. Here, we report the in vitro cell viability, cell adhesion and proliferation with osetoblastic differentiation of MG 63 osteoblast-like cell line on these scaffolds. In addition, we have also modified the surface of these scaffolds using collagen type I and chitosan biopolymers. Our results show that although the SF scaffold does support in vitro cell attachment, proliferation and differentiation, this performance can be further enhanced using the surface coating approach. Also, the ALP activity and bone mineralization was found to be particularly superior in the chitosan modified scaffolds.}, doi = {10.1039/c7ra03288a}, author = {Parekh, Nimisha Anant and Hushye, Chandni and Warunkar, Saniya and Gupta, Sayam Sen and Nisal, Anuya} } @article {44418, title = {Acid modified H-USY zeolite for efficient catalytic transformation of fructose to 5-hydroxymethyl furfural (biofuel precursor) in methyl isobutyl ketone-water biphasic system}, journal = {Energy Fuels}, volume = {32}, year = {2018}, month = {FEB}, pages = {3783{\textendash}3791}, abstract = {Sustainable process and efficient heterogeneous acid catalyst for the preparation of platform chemicals like 5-hydroxymethyl furfural (5-HMF) from renewable source is much in demand in the context of heterogeneous catalysis. Commercially available solid acid catalyst, H-USY zeolite was modified by treating with aqueous solution of H3PO4 and H2SO4 (10{\textendash}30 wt \%). Modified H-USY was completely characterized by XRD, NH3-TPD, energy dispersive analysis X-ray (EDAX), FT-IR, pyridine-IR, and NMR. Its catalytic performance was evaluated for the fructose conversion to 5-HMF in methyl isobutyl ketone (MIBK){\textendash}water system. Modified H-USY zeolite was identified to have potential in enhancement of 5-HMF yield up to 65\% from 32\% (parent H-USY) with minimum formation of furfural (8\%). H-USY modified with 10 wt \% H3PO4 (10P{\textendash}Y) was found to be the best compared to other studied catalysts, namely, H-USY modified with 20 and 30 wt \% H3PO4 (20 and 30P{\textendash}Y) or 10{\textendash}30 wt \% H2SO4 (10- to 30S{\textendash}Y). Best performance of 10P{\textendash}Y is associated with the optimum combination of moderate acidity (both weak as well as strong), moderate dealumination of Al from extra-framework sites as well as from framework sites of H-USY, formation of new Al{\textendash}O{\textendash}P bonds between framework Al and elemental monomeric phosphorus, presence of Br{\o}nsted as well as Lewis acidity, and creation of mesopores. This gives new insight on a potential heterogeneous acid catalyst for the synthesis of 5-HMF.}, doi = {10.1021/acs.energyfuels.7b03684}, author = {Pande, Ashwini and Niphadkar, Prashant and Pandare, Kiran and Bokade, Vijay} } @article {44208, title = {Analysis of the anomalous mean-field like properties of Gaussian core model in terms of entropy}, journal = {Journal of Chemical Physics}, volume = {148}, year = {2018}, month = {JAN}, pages = {034504}, type = {Article}, abstract = {

Studies of the Gaussian core model (GCM) have shown that it behaves like a mean-field model and the properties are quite different from standard glass former. In this work, we investigate the entropies, namely, the excess entropy (Sex) and the configurational entropy (S-c) and their different components to address these anomalies. Our study corroborates most of the earlier observations and also sheds new light on the high and low temperature dynamics. We find that unlike in standard glass former where high temperature dynamics is dominated by two-body correlation and low temperature by many-body correlations, in the GCM both high and low temperature dynamics are dominated by many-body correlations. We also find that the many-body entropy which is usually positive at low temperatures and is associated with activated dynamics is negative in the GCM suggesting suppression of activation. Interestingly despite the suppression of activation, the Adam-Gibbs (AG) relation that describes activated dynamics holds in the GCM, thus suggesting a non-activated contribution in AG relation. We also find an overlap between the AG relation and mode coupling power law regime leading to a power law behavior of S-c. From our analysis of this power law behavior, we predict that in the GCM the high temperature dynamics will disappear at dynamical transition temperature and below that there will be a transition to the activated regime. Our study further reveals that the activated regime in the GCM is quite narrow. Published by AIP Publishing.

}, issn = {0021-9606}, doi = {10.1063/1.5013644}, author = {Nandi, Manoj Kumar and Bhattacharyya, Sarika Maitra} } @article {44424, title = {Antibacterial and anti-TB tat-peptidomimetics with improved efficacy and half-life}, journal = {European Journal of Medicinal Chemistry}, volume = {152}, year = {2018}, month = {MAY}, pages = {358-369}, abstract = {Non-natural antimicrobial peptides are ideal as next-generation antibiotics because of their ability to circumvent the problems of drug resistance and in vivo instability. We report novel all-alpha- and alpha,gamma-mixed Tat peptide analogues as potential antibacterial and anti-TB agents. These peptides have broad spectrum antibacterial activities against Gram-positive (MICs 0.61 +/- 0.03 to 1.35 +/- 0.21 mu M with the peptide gamma TatM4) and Gram-negative (MICs 0.71 +/- 0.005 to 1.26 +/- 0.02 M with gamma TatM4) bacteria and are also effective against active and dormant forms of Mycobacterium tuberculosis, including strains that are resistant to rifampicin and isoniazid. The introduction of the non-natural amino acids of the study in the Tat peptide analogues results in increased resistance to degradation by proteolysis, significantly increasing their half-life. The peptides appear to inhibit bacteria by a membrane disruption mechanism, and have only a low cytotoxic effect on mammalian cells. (C) 2018 Elsevier Masson SAS. All rights reserved.}, doi = {10.1016/j.ejmech.2018.04.039}, author = {Bhosle, Govind S. and Nawale, Laxman and Yeware, Amar M. and Sarkar, Dhiman and Fernandes, Moneesha} } @article {45557, title = {BIOPYDB: a dynamic human cell specific biochemical pathway database with advanced computational analyses platform}, journal = {Journal of integrative bioinformatics}, volume = {15}, year = {2018}, month = {MAR }, type = {Article}, abstract = {BIOPYDB: BIOchemical PathwaY DataBase is developed as a manually curated, readily updatable, dynamic resource of human cell specific pathway information along with integrated computational platform to perform various pathway analyses. Presently, it comprises of 46 pathways, 3189 molecules, 5742 reactions and 6897 different types of diseases linked with pathway proteins, which are referred by 520 literatures and 17 other pathway databases. With its repertoire of biochemical pathway data, and computational tools for performing Topological, Logical and Dynamic analyses, BIOPYDB offers both the experimental and computational biologists to acquire a comprehensive understanding of signaling cascades in the cells. Automated pathway image reconstruction, cross referencing of pathway molecules and interactions with other databases and literature sources, complex search operations to extract information from other similar resources, integrated platform for pathway data sharing and computation, etc. are the novel and useful features included in this database to make it more acceptable and attractive to the users of pathway research communities. The RESTful API service is also made available to the advanced users and developers for accessing this database more conveniently through their own computer programmes.}, issn = {1613-4516}, doi = {10.1515/jib-2017-0072}, author = {Chowdhury, S. and Sinha, N. and Ganguli, P. and Bhowmick, R. and Singh, V. and Nandi, S. and Sarkar, R. R.} } @article {44382, title = {Bismuth(III)-catalyzed cycloisomerization and (hetero)arylation of alkynols: simple access to 2-(hetero)aryl tetrahydrofurans and tetrahydropyrans}, journal = {Organic \& Biomolecular Chemistry}, volume = {16}, year = {2018}, month = {MAY}, pages = {3229-3240}, abstract = {2-(Hetero)aryl tetrahydrofurans and tetrahydropyrans were successfully synthesized using Bi(OTf)(3)-catalyzed hydroalkoxylation (cycloisomerization) of alkynols (via 5 or 6 exo-dig cyclization) and intermolecular (hetero)arylation. This reaction involves a highly efficient cascade process, where initially the alkynol undergoes a cycloisomerization step via activation of the triple bond and generates the oxocarbenium ion, which subsequently participates in the (hetero)hydroarylation step with electron-rich arenes. Simple to complex suitably functionalized alkynols (4-pentyn-1-ols and 5-hexyn-1-ols) and electron-rich aromatic compounds were found to be reliable substrates in this cascade transformation and furnished a wide range of oxygen heterocycles. This practical tandem process provides a means to build libraries related to pharmacologically active molecules and natural product like scaffolds.}, doi = {10.1039/c8ob00368h}, author = {Nakate, Ashwini K. and Pratapure, Madhukar S. and Kontham, Ravindar} } @article {45545, title = {Changing landscapes of industry-academia collaboration}, journal = {Indian Drugs}, volume = {55}, year = {2018}, month = {JUL}, pages = {5-6}, type = {Article}, issn = {0019462X}, author = {Nair, G.G.} } @article {44651, title = {Cloning and characterization of trehalase: a conserved glycosidase from oriental midge, Chironomus ramosus}, journal = {3 Biotech}, volume = {8}, year = {2018}, month = {AUG}, pages = {352}, abstract = {

Insect trehalase is a multiferous enzyme, crucial for normal physiological functions as well as under stress conditions. In this report, we present a fundamental study of the trehalase gene segment (1587 bp) from Chironomus ramosus (CrTre) encoding for 529 amino acids, using appropriate bioinformatics tools. C. ramosus, a tropical midge is an emerging animal model to investigate the consequences of environmental stresses. We observed that CrTre belongs to GH family 37 in the CAZy database and possess 57-92\% identity to dipteran trehalases. In silico characterization provided information regarding the structural, functional and evolutionary aspects of midge trehalase. In the phylogenetic tree, CrTre clustered with the soluble dipteran trehalases. Moreover, domain functional characterization of the deduced protein sequence by InterProScan (IPR001661), ProSite (PS00927 and PS00928) and Pfam (PF01204) indicated presence of highly conserved signature motifs which are important for the identification of trehalase superfamily. Furthermore, the instability index of CrTre was predicted to be \< 40 suggesting its in vivo stability while, the high aliphatic index indicated towards its thermal stability (index value 71-81). The modelled 3D tertiary structure of CrTre depicts a (alpha/alpha)(6) barrel toroidal core. The catalytic domain of the enzyme comprised Glu424 and Asp226 as the putative active site residues. Interestingly, the conserved motifs were observed to be formed by the flexible loopy regions in the tertiary structure. This study revealed essential sequence features of the midge trehalase and offers better insights into the structural aspects of this enzyme which can be correlated with its function.

}, keywords = {Conserved motifs, Homology modelling, Midges, Secondary structure, trehalose}, issn = {2190-572X}, doi = {10.1007/s13205-018-1376-y}, author = {Shukla, Ekta and Thorat, Leena and Bendre, Ameya D. and Jadhav, Santosh and Pal, Jayanta K. and Nath, Bimalendu B. and Gaikwad, Sushama M.} } @article {44640, title = {Correlation trends in the magnetic hyperfine structure of atoms: a relativistic coupled-cluster case study}, journal = {Physical Review A}, volume = {98}, year = {2018}, month = {AUG}, type = {Article}, abstract = {

The role of electron correlation in the hyperfine structure of alkali metals and alkaline earth metal monopositive ions in their ground electronic configuration is investigated using the Z-vector method in a relativistic coupled-cluster regime within the singles and doubles approximation. The systematic effects of core-correlating functions, polarization of core electrons, and high-lying virtual functions on core electrons correlation are studied. The study reveals that the core-correlating function plays a significant role in core polarization and thus is very important for precise calculation of the wave function near the nuclear region. The inner-core electrons (1s-2p) require very high virtual energy functions for proper correlation. Therefore, the all-electron correlation treatment and the inclusion of higher-energy virtual functions are the key factors for precise calculation of the hyperfine structure constant of atoms. Our calculated values are in excellent agreement with the available experimental values, which also implies that the wave function produced by the Z-vector method is accurate enough for further calculation of the parity- and time-reversal symmetry-violating properties in atoms and molecules.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.98.022507}, author = {Talukdar, Kaushik and Sasmal, Sudip and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @book {45564, title = {CRC handbook of terpenoids: triterpenoids volume I: acyclic, monocyclic, bicyclic, tricyclic, and tetracyclic terpenoids}, volume = {1}, year = {2018}, pages = {1-573}, publisher = {CRC Press, Inc.}, organization = {CRC Press, Inc.}, abstract = {This Handbook, pinpoints salient features of known information about Terpenoids in a readily accessible and readable format. Terpenoids have singularly enriched organic chemistry by its variety of structural types, by its wealth of{\textquotedblleft}unexpected{\textquotedblright} reactions, rearrangements and spectral features, and by offering exciting targets for synthesis. Much imaginative experimental work has been invested in exploring their natural pathways. Recent years have revealed an increasingly important biological and ecological role for several of its members.}, issn = {978-135108122}, doi = {10.1201/9781351072779}, url = {https://www.scopus.com/inward/record.url?eid=2-s2.0-85052450204\&partnerID=40\&md5=efc31fc3efbbbb557e420b525e90748a}, author = {Dev, S. and Nagasampagi, B.A.} } @article {45430, title = {CSGID solves structures and identifies phenotypes for five enzymes in toxoplasma gondii}, journal = {Frontiers in Cellular and Infection Microbiology}, volume = {8}, year = {2018}, month = {OCT}, type = {Article}, abstract = {

Toxoplasma gondii, an Apicomplexan parasite, causes significant morbidity and mortality, including severe disease in immunocompromised hosts and devastating congenital disease, with no effective treatment for the bradyzoite stage. To address this, we used the Tropical Disease Research database, crystallography, molecular modeling, and antisense to identify and characterize a range of potential therapeutic targets for toxoplasmosis. Phosphoglycerate mutase II (PGMII), nucleoside diphosphate kinase (NDK), ribulose phosphate 3-epimerase (RPE), ribose-5-phosphate isomerase (RPI), and ornithine aminotransferase (OAT) were structurally characterized. Crystallography revealed insights into the overall structure, protein oligomeric states and molecular details of active sites important for ligand recognition. Literature and molecular modeling suggested potential inhibitors and druggability. The targets were further studied with vivoPMO to interrupt enzyme synthesis, identifying the targets as potentially important to parasitic replication and, therefore, of therapeutic interest. Targeted vivoPMO resulted in statistically significant perturbation of parasite replication without concomitant host cell toxicity, consistent with a previous CRISPR/Cas9 screen showing PGM, RPE, and RPI contribute to parasite fitness. PGM, RPE, and RPI have the greatest promise for affecting replication in tachyzoites. These targets are shared between other medically important parasites and may have wider therapeutic potential.

}, issn = { 2235-2988}, doi = {10.3389/fcimb.2018.00352}, author = {Lykins, Joseph D. and Filippova, Ekaterina V and Halavaty, Andrei S. and Minasov, George and Zhou, Ying and Dubrovska, Ievgeniia and Flores, Kristin J. and Shuvalova, Ludmilla A. and Ruan, Jiapeng and El Bissati, Kamal and Dovgin, Sarah and Roberts, Craig W. and Woods, Stuart and Moulton, Jon D. and Moulton, Hong and Mcphillie, Martin J. and Muench, Stephen P. and Fishwick, Colin W. G. and Sabini, Elisabetta and Shanmugam, Dhanasekaran and Roos, David S. and Mcleod, Rima and Anderson, Wayne F. and Ngo, Huan M.} } @article {44444, title = {Curcumin: pharmaceutical solids as a platform to improve solubility and bioavailability}, journal = {Crystengcomm}, volume = {20}, year = {2018}, month = {JUN}, pages = {3277-3296}, abstract = {Curcumin (CUR) is the prime curcuminoid in the Indian dietary spice turmeric, Curcuma longa, a plant of the Zingiberaceae family. CUR has promising and diverse therapeutic benefits, such as antioxidant, anti-inflammatory, antitumor, anti-hyperglycemic, antimalarial, antibacterial, and antiviral activity, including anti-Alzheimer{\textquoteright}s disease. However, CUR is yet to reach the status of a therapeutic drug candidate mainly because a standard solid dosage of curcumin suffers from poor oral bioavailability (0.05 g mL(-1), less than 1\%). The reasons behind its low bioavailability include poor solubility (<8 g mL(-1) in water), low permeability and absorption, and rapid metabolism (short elimination half-life of <2 h). A successful CUR therapy requires an appropriate formulation system that will enhance the bioavailability and offer greater therapeutic efficacy. This review covers a comprehensive description of the CUR pharmaceutical solids, such as polymorphs, cocrystals, eutectics, and coamorphous solid-state forms with aim to determine ways to improve its physicochemical properties, including dissolution rate, solubility, physicochemical stability, mechanical strength, compressibility for tablet formation, and oral bioavailability. The cumulative publications in the past decade have forecast a bright future for development of an oral drug formulation of curcumin.}, doi = {10.1039/c8ce00469b}, author = {Suresh, Kuthuru and Nangia, Ashwini} } @article {44445, title = {Curcumin-artemisinin coamorphous solid: Xenograft model preclinical study}, journal = {Pharmaceutics}, volume = {10}, year = {2018}, month = {MAR}, pages = {Article Number: 7}, abstract = {Curcumin is a natural compound present in Indian spice turmeric. It has diverse pharmacological action but low oral solubility and bioavailability continue to limit its use as a drug. With the aim of improving the bioavailability of Curcumin (CUR), we evaluated Curcumin-Pyrogallol (CUR-PYR) cocrystal and Curcumin-Artemisinin (CUR-ART) coamorphous solid. Both of these solid forms exhibited superior dissolution and pharmacokinetic behavior compared to pure CUR, which is practically insoluble in water. CUR-ART coamorphous solid showed two fold higher bioavailability than CUR-PYR cocrystal (at 200 mg/kg oral dose). Moreover, in simulated gastric and intestinal fluids (SGF and SIF), CUR-ART is stable up to 3 and 12 h, respectively. In addition, CUR-PYR and CUR-ART showed no adverse effects in toxicology studies (10 times higher dose at 2000 mg/kg). CUR-ART showed higher therapeutic effect and inhibited approximately 62\% of tumor growth at 100 mg/kg oral dosage of CUR in xenograft models, which is equal to the positive control drug, doxorubicin (2 mg/kg) by i.v. administration.}, doi = {10.3390/pharmaceutics10010007}, author = {Mannava, M. K. Chaitanya and Suresh, Kuthuru and Bommaka, Manish Kumar and Konga, Durga Bhavani and Nangia, Ashwini} } @article {45502, title = {De novo transcriptome analysis of the egg parasitoid Trichogramma chilonis Ishii (Hymenoptera: Trichogrammatidae): a biological control agent}, journal = {Gene Reports}, volume = {13}, year = {2018}, month = {DEC}, pages = {115-129}, type = {Article}, abstract = {Trichogramma chilonis Ishii is an endoparasitic wasp widely used as a biological control agent of economically important pests. However, absence of genetic information on T. chilonis hampers further research, especially at the molecular level. Here, we performed the first RNA-Seq of the adult T. chilonis. A total of 18,372,639 high-quality reads were generated using Illumina pair-ended sequencing platform. De novo assembly resulted into 24,488 transcripts, with mean length and N50 values of 1444.2 bp and 2667 bp, respectively. Of the transcripts, 14,643 exhibited putative homology with class Insecta proteins from UniPROT database. To understand the contig functions, gene descriptions, gene ontology and cluster of orthologous group annotations were analyzed. Following functional annotation, a number of transcripts encoding detoxification, target receptor action and olfaction- related proteins were identified and analyzed. In addition, 4520 transcripts containing simple sequence repeats, ranging from dinucleotide to hexanucleotide repeats were discovered, with trinucleotide being the most enriched repeats. This new sequence resource will shed light on various molecular mechanisms in T. chilonis and related species.}, issn = {24520144}, doi = {10.1016/j.genrep.2018.08.009}, author = {Kerima, O.Z. and Niranjana, P. and Vinay Kumar, B.S. and Ramachandrappa, R. and Puttappa, S. and Lalitha, Y. and Jalali, S.K. and Ballal, C.R. and H. V. Thulasiram} } @article {44195, title = {Design, synthesis, and pharmacological evaluation of fluorinated azoles as anti-tubercular agents}, journal = {Archiv Der Pharmazie}, volume = {351}, year = {2018}, month = {FEB}, pages = {e1700294}, type = {Article}, abstract = {

Design, synthesis, and biological screening of 2,2-dimethyl-2,3-dihydrobenzofuran tethered 1,3,4-oxadiazole derivatives as anti-tubercular agents were described. The synthesis of the target compounds was conducted by a series of reaction schemes. All the synthesized compounds were characterized by IR, H-1 NMR, C-13 NMR, and mass spectrometry. The therapeutic potential of the synthesized compounds was confirmed by molecular docking studies. Among the synthesized compounds, 12a, 12c, 12d, 12e, 12g, and 12j were found to be more active against non-replicating than against replicating cultures of Mycobacterium tuberculosis H37Ra ex vivo and in vitro. These compounds exhibit minimum inhibitory concentration (MIC) values in the range of 2.31-23.91g/mL. The cytotoxicity study was conducted against the cell lines THP-1, A549 and PANC-1, and the compounds were observed to be non-toxic to host cells. Molecular docking was conducted with InhA (FabI/ENR) and suggested the antimycobacterial potential of the synthesized compounds. The investigation presented here was found to be adventitious for the development of new therapeutic agents against Mycobacterium infection.

}, keywords = {1, 2, 2-dimethyl-2, 3, 3-dihydrobenzofuran, 4-Oxadiazole, anti-tubercular agents, Cytotoxicity, Molecular docking}, issn = {0365-6233}, doi = {10.1002/ardp.201700294}, author = {Gholap, Somnath and Tambe, Macchindra and Nawale, Laxman and Sarkar, Dhiman and Sangshetti, Jaiprakash and Damale, Manoj} } @article {44456, title = {Diversity in binding, regulation, and evolution revealed from high-throughput ChIP}, journal = {PLoS Computational Biology}, volume = {14}, year = {2018}, month = {APR}, pages = {Article Number: e1006090}, abstract = {

Genome-wide in vivo protein-DNA interactions are routinely mapped using high-throughput chromatin immunoprecipitation (ChIP). ChIP-reported regions are typically investigated for enriched sequence-motifs, which are likely to model the DNA-binding specificity of the profiled protein and/or of co-occurring proteins. However, simple enrichment analyses can miss insights into the binding-activity of the protein. Note that ChIP reports regions making direct contact with the protein as well as those binding through intermediaries. For example, consider a ChIP experiment targeting protein X, which binds DNA at its cognate sites, but simultaneously interacts with four other proteins. Each of these proteins also binds to its own specific cognate sites along distant parts of the genome, a scenario consistent with the current view of transcriptional hubs and chromatin loops. Since ChIP will pull down all X-associated regions, the final reported data will be a union of five distinct sets of regions, each containing binding sites of one of the five proteins, respectively. Characterizing all five different motifs and the corresponding sets is important to interpret the ChIP experiment and ultimately, the role of X in regulation. We present DIVERSITY which attempts exactly this: it partitions the data so that each partition can be characterized with its own de novo motif. DIVERSITY uses a Bayesian approach to identify the optimal number of motifs and the associated partitions, which together explain the entire dataset. This is in contrast to standard motif finders, which report motifs individually enriched in the data, but do not necessarily explain all reported regions. We show that the different motifs and associated regions identified by DIVERSITY give insights into the various complexes that may be forming along the chromatin, something that has so far not been attempted from ChIP data. Webserver at nci.res.i, if; standalone (Mac OS X/Linux) from from https://github.com/NarlikarLab/DIVERSITY/releases/tag/v1.0.0.

}, doi = {10.1371/journal.pcbi.1006090}, author = {Mitra, Sneha and Biswas, Anushua and Narlikar, Leelavati} } @article {44619, title = {Education with a purpose}, journal = {Current Science}, volume = {115}, year = {2018}, month = {JUL }, pages = {20-21}, issn = {0011-3891}, author = {Nangia, Ashwini K.} } @article {44459, title = {Effect of crystal packing on the thermosalient effect of the pincer-type diester naphthalene-2,3-diyl-bis(4-fluorobenzoate): a new class II thermosalient solid}, journal = {Chemistry-A European Journal}, volume = {24}, year = {2018}, month = {MAR}, pages = {4133-4139}, abstract = {The pincer-like double ester naphthalene-2,3-diyl-bis(4-fluorobenzoate) (2) is pentamorphic. Upon heating crystals of form I to below their melting point (441-443 K), they undergo a phase transition accompanied by a thermosalient effect, that is, rare and visually striking motility whereby the crystals jump or disintegrate. The phase transition and the thermosalient effect are reversible. Analysis of the crystal structure revealed that form I is a class II thermosalient solid. Crystals of form III also underwent a reversible phase transition in the temperature range of 160 to 170 K; however, they were not thermosalient. Comparison of the structures and the mechanical responses of the two polymorphs revealed that the thermosalient effect of form I was due to reversible closing and opening of the arms of the diester molecules in a tweezer-like action.}, doi = {10.1002/chem.201705586}, author = {Tamboli, Majid I. and Karothu, Durga Prasad and Shashidhar, Mysore S. and Gonnade, Rajesh G. and Naumov, Pance} } @article {44335, title = {Effect of titration time on the catalytic performance of Cu/CeO2 catalysts for water-gas shift reaction}, journal = {Catalysis Today}, volume = {309}, year = {2018}, month = {JUL}, pages = {83-88}, type = {Article}, abstract = {We herein report the preparation of ceria (CeO2) via a simple precipitation method for use as a catalyst support in the water-gas shift (WGS) reaction. More specifically, we optimized the titration time required to obtain highly active CeO2-supported catalysts for the WGS reaction. As such, Cu was employed as the active metal coupled with the CeO2 support. Notably, the CeO2-0 supported Cu catalyst (where the precipitant was immediately injected into a cerium nitrate solution) exhibited the highest CO conversion at a gas hourly space velocity of 36,050 h(-1). This high catalytic activity of the Cu/CeO2-0 catalyst was mainly due to its high Brunauer-Emmett-Teller (BET) surface area, enhanced Cu dispersion, high number of oxygen vacancies, and enhanced reducibility.}, issn = {09205861}, doi = {10.1016/j.cattod.2017.10.007}, author = {Na, Hyun-Suk and Shim, Jae-Oh and Jang, Won-Jun and Jeon, Kyung-Won and Kim, Hak-Min and Lee, Yeol-Lim and Lee, Da-We and Yoo, Seong-Yeun and Bae, Jong Wook and Rode, Chandrashekhar V. and Roh, Hyun-Seog} } @article {44394, title = {Effects of constant kinetic energy of different impacting particles on slurry erosion wear of AA 6063}, journal = {Journal of Tribology-Transactions of the ASME}, volume = {140}, year = {2018}, month = {MAY}, pages = {Article Number: 031605}, type = {Article}, abstract = {The present experimental study investigates the effect of constant kinetic energy on erosion wear of aluminum alloy 6063. Three different natural erodents (quartz, silicon carbide, and alumina) with different particle sizes are used to impact at 45 deg and 90 deg impact angles. For calculating the number of particles in the slurry pot, it is assumed that the solid particles are of spherical shape. The total numbers of impacting solid particles were kept constant by adjusting the solid concentration, velocity, and test duration. The scanning electron microscope (SEM) images of the three erodents show that the alumina particles have sharp edges with more angularity, and silicon carbide particles have subangular nature while quartz particles are blocky in shape. The mass loss per particle at 45 deg impact angle is observed higher than at normal impact angle. It may be due to the change in material removal mechanism with changing the impact angle. It is also found that the mass loss per particle from the target material having different particle size with constant kinetic energy remains constant for respective erodents. This indicates that the velocity exponent of impacting particles is around 2. The SEM images of eroded surfaces reveal the different mechanisms of material removal at 45 deg impact angle and at normal impact angle.}, issn = {07424787}, doi = {10.1115/1.4038355}, author = {Nandre, Bhushan D. and Desale, Girish R.} } @article {44605, title = {Efficient solar light-driven H-2 production: post-synthetic encapsulation of a Cu2O co-catalyst in a metal-organic framework (MOF) for boosting the effective charge carrier separation}, journal = {Catalysis Science \& Technology}, volume = {8}, year = {2018}, month = {JUL}, pages = {3286-3294}, abstract = {

The development of new and efficient catalytic systems for solar light-driven hydrogen generation is one of the prime focuses of contemporary chemical sciences. Indeed, the charge carrier separation efficiency of a photocatalyst plays a vital role in photocatalysis. Herein, we have successfully designed a Cu2O-encapsulating NH2-MIL-125(Ti) MOF by a post-synthetic encapsulation strategy. The Cu2O-encapsulating MOF material showed a remarkable enhancement in photocatalytic H-2 production activity under solar light illumination. Gratifyingly, the H-2 production activity under solar light was around approximate to 28-fold higher than that of the pristine MOF. The enhancement in photocatalytic activity may be attributed to efficient charge carrier separation through Ti3+ sites and the broad light absorption of the Cu2O-encapsulating MOF photocatalyst. The possible electron transport mechanism, potential energy diagram (V vs. NHE), and the existence of Ti3+ ions have been demonstrated by various spectroscopic studies.

}, issn = {2044-4753}, doi = {10.1039/c8cy00604k}, author = {Karthik, Peramaiah and Balaraman, Ekambaram and Neppolian, Bernaurdshaw} } @article {44181, title = {Electrochemical capacitive energy storage in PolyHIPE derived nitrogen enriched hierarchical porous carbon nanosheets}, journal = {Carbon}, volume = {128}, year = {2018}, month = {MAR}, pages = {287-295}, type = {Article}, abstract = {

Porous and interconnected electrodes based on carbon nanoarchitectures offer comprehensive advantages of large specific surface area and high porosity consequently increasing the specific capacitance of ultracapacitor energy storage systems. Emulsion-templated polymers, PolyHIPEs (Polymerized High Internal Phase Emulsions) are highly porous polymers with a structure of cages interconnected by windows thus provide suitable framework to create such porous carbon nanostructures. Herein, nitrogen enriched porous carbon nanosheets are synthesized by pyrolysis of polymer-silica hybrid PolyHIPE and subsequent silica removal. This nitrogen enriched porous carbon nanosheets when tested as an electrode for ultracapacitor, showed specific capacitance as high as 209 F/g at a current density of 1 A/g in 1 M H2SO4 with excellent capacity retention over long cycling. (c) 2017 Elsevier Ltd. All rights reserved.

}, keywords = {Energy storage, Nitrogen enriched porous carbon nanosheets, PolyHIPE template, Ultracapacitor}, issn = {0008-6223}, doi = {10.1016/j.carbon.2017.11.080}, author = {Deshmukh, Ashvini B. and Nalawade, Archana C. and Karbhal, Indrapal and Qureshi, Mohammed Shadbar and Shelke, Manjusha V.} } @article {44223, title = {Enhanced and synergistic downregulation of oncogenic miRNAs by self-assembled branched DNA}, journal = {Nanoscale}, volume = {10}, year = {2018}, month = {JAN}, pages = {195-202}, type = {Article}, abstract = {

miRNAs, a group of small non-coding RNA molecules, regulate the expression of many genes involved in various cellular processes. Acute evidence suggests that one miRNA can regulate many genes as its targets, while one gene can be targeted by many miRNAs that co-operatively regulate the gene. Thus, targeting a single miRNA is not sufficient enough to rescue the disease phenotype but it is also essential to target multiple miRNAs simultaneously. This inspired us to design a novel DNA nanostructure that can concurrently downregulate multiple oncomiRNAs. Here we designed a programmable antimiR branched DNA (antimiR-bDNA) nanostructure having antimiRNAs for selective binding to oncomiRNAs miRNA-27a, 96 and 182 which collectively downregulate FOXO1a expression. The antimiR-bDNAs show enhanced stability compared to naked antimiRNAs in serum and are able to knockdown these miRNAs with up to similar to 50\% greater repression as compared to antimiRNAs. This synergistic miRNA repression leads to the restoration of FOXO1a protein levels which in turn inhibit G1-S traversion in cancer cells. To the best of our knowledge, this is the first study harnessing the ability of bDNA structures to silence multiple miRNAs simultaneously.

}, issn = {2040-3364}, doi = {10.1039/c7nr06601e}, author = {Nahar, S. and Nayak, A. K. and Ghosh, A. and Subudhi, U. and Maiti, S.} } @article {45448, title = {Entacapone: improving aqueous solubility, diffusion permeability, and cocrystal stability with theophylline}, journal = {Crystal Growth \& Design}, volume = {18}, year = {2018}, month = {OCT}, pages = {6061-6069}, type = {Article}, abstract = {Cocrystallization is a well-established technique to improve the solubility, bioavailability, and stability of active pharmaceutical ingredients (APIs) but permeability and diffusion rate control via cocrystals is relatively less well studied, and the exact role of coformers in influencing the diffusion rate of drug cocrystals is still not fully understood. The aqueous solubility and permeability diffusion of Entacapone, ETP, a Biopharmaceutical Classification System (BCS) Class IV drug of low solubility and low permeability, with Generally Regarded as Safe (GRAS) coformers has been studied. Fixed stoichiometry cocrystals of ETP with acetamide (ACT, 1:1), nicotinamide (NAM, 1:1), isonicotinamide (INAM, 1:1), pyrazinamide (PYZ, 1:1), and isoniazid (INZ), 1:1) were prepared by solvent-assisted grinding. Theophylline (THP) resulted in a cocrystal hydrate (ETP-THP-FIYD 1:1:1). The cocrystals were structurally characterized by single crystal and powder X-ray diffraction, DSC and TGA thermal measurements, and IR and NMR spectroscopy. Solubility and dissolution rate showed that there is a correlation between cocrystal stability and solubility governed by the heteromeric N-H center dot center dot center dot O, O-H center dot center dot center dot N, and O-H center dot center dot center dot O hydrogen bonds and conformational changes of ETP in cocrystal structures. ETP-THP-HYD and ETP-PYZ exhibit faster dissolution rate and high solubility and they are stable in phosphate buffer medium compared to the other cocrystals which dissociate partially during solubility experiments. Diffusion rates in a Franz cell showed that the stable and high solubility ETP-THP-HYD cocrystal has good permeability. Given that stability, solubility, and permeability are in general inversely correlated, the entacapone-theophylline hydrate cocrystal is a unique example of the thermodynamically stable cocrystal exhibiting high solubility and high permeability.}, issn = {1528-7483}, doi = {10.1021/acs.cgd.8b00921}, author = {Bommaka, Manish Kumar and Mannava, M. K. Chaitanya and Suresh, Kuthuru and Gunnam, Anilkumar and Nangia, Ashwini} } @article {44470, title = {Ethoxy-ester functionalized imidazolium based ionic liquids for lithium ion batteries }, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {JUN}, pages = {6255-6261}, abstract = {Ethoxy ester functionalized imidazolium and bis(tri fluoromethanesulfonyl)imide based ionic liquids (ILs) are synthesized and considered as electrolyte for lithium ion batteries. The series of ethoxy ester functionalized ionic liquids were chosen with increase in ethoxy unit from one to three, followed by polymeric units. These ionic liquids provide both ester and ethoxy groups as interaction sites for Li+ ions enhancing the Li+ ion transportation, resulting in ionic conductivity of 10(-3) Scm(-1) at 25 degrees C, which is of 10(3) factor higher than ethoxy containing polyethylene oxide solid polymer electrolyte. It{\textquoteright}s noteworthy that the conductivity increases as ethoxy units are increased from one to three units, followed by a decrease for the polymeric ethoxy unit. Electrochemical stability window of these ionic liquids improves as the ethoxy groups are added to imidazolium cation. The Li/LiFePO4 cell fabricated with [ME(3)AMIm][TFSI] electrolyte shows good initial discharge capacity of 98.5 mAhg(-1) at 0.05 C-rate at room temperature, which gradually decreases with cycling. Systematic investigation of electrode surfaces by using SEM and EDX shows deposition of passivation layers on their surfaces. Ionic liquids fabricated by this facile method provide a promising model system for understanding the molecular interactions in promoting the lithium-ion conduction mechanism. The advantages and the limits associated to series of ionic liquid electrolytes are critically investigated.}, doi = {10.1002/slct.201800513}, author = {Nirmale, Trupti and Khupse, Nageshwar and Gore, Rohitkumar and Ambekar, Jalindar and Kulkarni, Milind and Varma, Anjanikumar and Kale, Bharat} } @article {44471, title = {Evaluation of Candida tropicalis (NCIM 3321) extracellular phytase having plant growth promoting potential and process development}, journal = {Biocatalysis and Agricultural Biotechnology}, volume = {13}, year = {2018}, month = {JAN}, abstract = {

Phytase is known to provide a solution for depletion of phosphorus (P). It helps it by hydrolyzing the insoluble P source in soil which is phytate. In this study, provides insight on yeast Candida tropicalis (NCIM 3321) which produces cell bound and extracellular thermostable phytase. The media components were optimized to enhance the enzyme production and checked for plant growth promoting activity. On optimization the isolate exhibited enhanced cell bound and extracellular phytase activity by four folds (from 236 to 1024 IU DCG$^{-}${\textonesuperior}) and by five folds (from 0.46 to 1.95 IU ml$^{-}${\textonesuperior}) respectively in 36 h. The production time decreased to 24 h compare to shake flask on Up-scaling the production process upto 10 L scale, thus increasing the productivity of cell bound (1810 IU DCG$^{-}${\textonesuperior}day$^{-}${\textonesuperior}) and extracellular phytase (6.08 IU ml$^{-}${\textonesuperior} day$^{-}${\textonesuperior}). The crude phytase (12 IU) from NCIM 3321 strain was studied for plant growth promotion activity in lab scale and field level experiments with maize crop. Findings of the study revealed that the extracellular phytase derived from non pathogenic C. tropicalis (NCIM 3321) was found to be plant growth stimulating by increasing the available P in soil. Our findings of phytase isolated from non-pathogenic yeast C. tropicalis NCIM 3321 exhibited dephytinization potential. Therefore, current study may have profound application in sustainable agriculture.

}, doi = {10.1016/j.bcab.2017.12.013}, author = {Puppala, Kumar Raja and Naik, Tejali and Shaik, Alfina and Dastager, Syed and Kumar, V. Ravi and Khire, Jayant and Dharne, Mahesh} } @article {45393, title = { Fast dissolving moxifloxacin hydrochloride antibiotic drug from electrospun Eudragit L-100 nonwoven nanofibrous mats}, journal = {Materials Science \& Engineering C-Materials For Biological Applications }, volume = {92}, year = {2018}, month = {NOV}, pages = { 526-539}, type = {Article}, abstract = {Antimicrobial electrospun nonwoven Eudragit L-100 nanofibrous mats containing Moxifloxacin hydrochloride (MOX-HCL) were fabricated for fast dissolving drug delivery systems (DDSs) associated with wound infection. The morphological characterization of nanofibers using ESEM revealed that the average diameter of non-woven nanofibrous mats ranges 200-600 nm. The nanofiber showed cylindrical shape with crack on the surface. Differential scanning calorimetric (DSC) and Wide Angle X-ray diffraction (WAXRD) demonstrate that the drug exists in an amorphous state in the nanofibers. Nanofibrous mats were also tested for mechanical strength, contact angle, swelling assay, haemolysis and disintegration test. In vitro disintegration tests demonstrated that the dissolution of Eudragit L-100 fiber mats was within 25 s which was higher compared to the pure drug. The Eudragit nanofibers showed pH-dependent drug release profiles, with slow release at pH 1.2 and burst release (around 30 s) at pH 6.8. The in-vitro quantitative and qualitative antimicrobial assay showed that the developed Eudragit L-100 nanofibrous mats with MOX-HCL concentration of 1\%, 5\% and 15 wt\% exhibited antibacterial activities against both gram positive (Staphylococcus aureus) and gram negative (Escherichia coli) bacteria. The invitro cytotoxicity assay using mouse fibroblast NIH/3T3 cells demonstrated significant biocompatibility of nanofiber mats. As per the results of biological evaluation, Eudragit L-100 nanofibrous mats with 1wt\% MOX-HCL could be a suitable substrate for biomedical applications. Eudragit L-100 nanofibrous mats containing Moxifloxacin hydrochloride (MOX-HCL) showed immediate DDSs for localized drug release in the wound infection at slightly acidic or alkaline conditions where faster drug release rate is required for wound healing.}, issn = {0928-4931}, doi = {10.1016/j.msec.2018.06.031}, author = {Giram, Prabhanjan S. and Shitole, Ajinkya and Nande, Smita S. and Sharma, Neeti and Garnaik, Baijayantimala} } @article {45401, title = {From a helix to a small cycle: metadynamics-inspired alpha v beta 6 integrin selective ligands}, journal = {Angewandte Chemie-International Edition}, volume = {57}, year = {2018}, month = {OCT}, pages = {14645-14649}, type = {Article}, abstract = {The RGD-recognizing alpha v beta 6 integrin has only recently emerged as a major target for cancer diagnosis and therapy. Thus, the development of selective, low-molecular-weight ligands of this receptor is still in great demand. Here, a metadynamics-driven design strategy allowed us to successfully convert a helical nonapeptide into a cyclic pentapeptide (6) showing remarkable potency and alpha v beta 6 specificity. NMR and docking studies elucidated the reasons for the high affinity and selectivity of this compound, setting the ground for the rational design of new alpha v beta 6-specific small peptides or even peptidomimetics. In vivo PET imaging studies demonstrated the potential use of 6 for medical applications.}, issn = { 1433-7851}, doi = {10.1002/anie.201803250}, author = {Di Leva, Francesco Saverio and Tomassi, Stefano and Di Maro, Salvatore and Reichart, Florian and Notni, Johannes and Dangi, Abha and Marelli, Udaya Kiran and Brancaccio, Diego and Merlino, Francesco and Wester, Hans-Juergen and Novellino, Ettore and Kessler, Horst and Marinelli, Luciana} } @article {44642, title = {Fused fluorenylindolenine-donor-based unsymmetrical squaraine dyes for dye-sensitized solar cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {AUG}, pages = {26335-26347}, abstract = {

A series of four unsymmetrical squaraine dyes, XSQ1-4, were synthesized using a fused fluorenylindolenine-based donor unit for dye-sensitized solar cells (DSSCs). The fused structure of fluorenylindolenine helped in moving the absorption toward the near-infrared (NIR) region, and the two sp(3)-C centers available on this donor were utilized to incorporate out-of-plane alkyl chains in opposite directions to control the dye-dye interactions on the TiO2 surface. High extinction coefficient (epsilon \>= 10(5) M-1 cm(-1)) for absorbing NIR photons and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels with respect to the conduction band of TiO2 and electrolyte for charge injection and dye regeneration processes, respectively, make these dyes potential sensitizers for DSSCs. Introduction of branched alkyl groups in the pi-framework helped in controlling dye aggregation to reduce exciton quenching and assisted in TiO2 surface passivation to avoid the charge recombination process. Furthermore, having a naphthyl group on the indole part of the anchoring group containing segment helped to red-shift the absorption spectrum of dyes 15 nm toward the NIR region (XSQ3-4). Among all of the dyes under investigation, XSQ2 gave the best photovoltaic performance, having a short-circuit current density (J(SC)) of 13.99 mA cm(-2), open -circuit voltage (V-OC) of 0.66 V, and a fill factor (ff) of 0.71, with a device performance (eta) of 6.57\%. Electrochemical impedance spectroscopy revealed higher electron lifetime on TiO2 for XSQ2, which helps to avoid the charge recombination process.

}, keywords = {Dye-sensitized solar cells, fluorenylindolenine, H- and J-type aggregation, NIR absorption, out-of-plane alkyl groups, squaraine dyes}, issn = {1944-8244}, doi = {10.1021/acsami.8b09866}, author = {Bisht, Rajesh and Sudhakar, Vediappan and Kavungathodi, Munavvar Fairoos Mele and Karjule, Neeta and Nithyanandhan, Jayaraj} } @inbook {45577, title = {Genomic roadmaps for augmenting salinity stress tolerance in crop plants}, booktitle = {Salinity Responses and Tolerance in Plants}, volume = {2}, year = {2018}, pages = {189-216}, publisher = {Springer}, organization = {Springer}, chapter = {8}, abstract = {Serious antagonistic impacts of saline environment on plant growth, development, and yield are well established. In this regard, researchers and breeders have been utilizing many conventional as well as modern approaches to aid the pro- cess of developing salt-tolerant crops. Biotechnological tools have made the task of engineering salinity tolerance in plants easier. Currently, two major annexes are effectively employed to develop salt-tolerant crops, first, investigation of genetic variation via marker-assisted selection (MAS) and second the transgenic technology. Sustenance of plants under dynamically growth-limiting saline environment depends on alterations and/or switching between multiple biochemical pathways involved in response. A number of key regulatory genes have been successfully identified and characterized in this context which can be explored to serve the purpose of alleviation in salt-tolerant nature of plants. Several genomics-abetted approaches have been reported aiming toward improvement in growth and yield of crops under saline envi- ronment. Present chapter focuses on genomic roadmaps for augmentation of crop salt tolerance by various methods including MAS, transgenic breeding, manipulations in small non-coding RNAs, and genome editing. These approaches utilize key players involved in salinity-mediated plant defense mechanisms, such as ion transporters, osmolytes, antioxidants, transcription factors, signaling proteins, and microRNA. The chapter attempts to summarize the effective targets and exploration of these key entities to raise salt-tolerant plants through various genomics-related tools. }, isbn = {978-3319903170}, doi = {10.1007/978-3-319-90318-7_8}, author = {Suprasanna, P. and Ghuge, S. A. and Patade, V. Y. and Mirajkar, S. J. and Nikalje, G. C.} } @article {44489, title = {G-quadruplex motif at the 3{\textquoteright} end of sgRNAs improves CRISPR-Cas9 based genome editing efficiency}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {MAR}, pages = {2377-2380}, abstract = {Originating as a component of prokaryotic adaptive immunity, the type II CRISPR/Cas9 system has been repurposed for targeted genome editing in various organisms. Although Cas9 can bind and cleave DNA efficiently under in vitro conditions, its activity inside a cell can vary dramatically between targets owing to differences between genomic loci and availability of enough Cas9/sgRNA (single guide RNA) complex molecules for cleavage. Most methods to improve CRISPR/Cas9 activity have so far relied on Cas9 protein engineering or base modifications in the sgRNA sequence. Here we demonstrate that a structure based rational design of sgRNAs can enhance the efficiency of Cas9 cleavage in vivo. By appending a naturally forming RNA G-quadruplex motif to the 3' end of sgRNAs we can improve its stability and target cleavage efficiency in zebrafish embryos without inducing off-target activity, thereby underscoring its value in the design of better and optimized genome editing triggers.}, issn = {1359-7345}, doi = {10.1039/C7CC08893K}, author = {Nahar, Smita and Sehgal, Paras and Azhar, Mohammad and Rai, Manish and Singh, Amrita and Sivasubbu, Sridhar and Chakraborty, Debojyoti and Maiti, Souvik} } @article {44492, title = {Helically structured peptide architecture engineered using dimedone as a rigid organic scaffold}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {MAR}, pages = {2776-2780}, abstract = {This communication reports the use of a rigid organic scaffold to attach two unsymmetrical peptide chains on a single carbon atom. The approach describes the step-by-step attachment of peptide chains to the rigid dimedone template (5,5-dimethyl-1,3-cyclohexanedione) - a molecular scaffold that directs orientation of the peptide helices in a well-defined arrangement via intra-molecular hydrogen bonding. The overall topology of the final molecules was studied using CD spectroscopy which suggested existence of helical architecture.}, doi = {10.1002/slct.201702856}, author = {Nadimpally, Krishna C. and Madica, Krishnaprasad and Kotmale, Amol S. and Gonnade, Rajesh G. and Sanjayan, Gangadhar J.} } @article {44493, title = {High and reversible lithium ion storage in self-exfoliated triazole-triformyl phloroglucinol-basedcovalent organic nanosheets}, journal = {Advanced Energy Materials}, volume = {8}, year = {2018}, month = {MAR}, pages = {Article Number: 1702170}, abstract = {Covalent organic framework (COF) can grow into self-exfoliated nanosheets. Their graphene/graphite resembling microtexture and nanostructure suits electrochemical applications. Here, covalent organic nanosheets (CON) with nanopores lined with triazole and phloroglucinol units, neither of which binds lithium strongly, and its potential as an anode in Li-ion battery are presented. Their fibrous texture enables facile amalgamation as a coin-cell anode, which exhibits exceptionally high specific capacity of approximate to 720 mA h g(-1) (@100 mA g(-1)). Its capacity is retained even after 1000 cycles. Increasing the current density from 100 mA g(-1) to 1 A g(-1) causes the specific capacity to drop only by 20\%, which is the lowest among all high-performing anodic COFs. The majority of the lithium insertion follows an ultrafast diffusion-controlled intercalation (diffusion coefficient, D-Li(+) = 5.48 x 10(-11) cm(2) s(-1)). The absence of strong Li-framework bonds in the density functional theory (DFT) optimized structure supports this reversible intercalation. The discrete monomer of the CON shows a specific capacity of only 140 mA h g(-1) @50 mA g(-1) and no sign of lithium intercalation reveals the crucial role played by the polymeric structure of the CON in this intercalation-assisted conductivity. The potentials mapped using DFT suggest a substantial electronic driving-force for the lithium intercalation. The findings underscore the potential of the designer CON as anode material for Li-ion batteries.}, doi = {10.1002/aenm.201702170}, author = {Haldar, Sattwick and Roy, Kingshuk and Nandi, Shyamapada and Chakraborty, Debanjan and Puthusseri, Dhanya and Gawli, Yogesh and Ogale, Satishchandra and Vaidhyanathan, Ramanathan} } @article {45385, title = {Highly stable COF-supported Co/Co(OH)(2) nanoparticles heterogeneous catalyst for reduction of nitrile/nitro compounds under mild conditions}, journal = {Small}, volume = {14}, year = {2018}, month = {SEP}, type = {Article}, abstract = {Ordered nanoporosity in covalent organic framework (COF) offers excellent opportunity for property development. Loading nanoparticles (nPs) onto them is one approach to introducing tailor-made properties into a COF. Here, a COF-Co/Co(OH)(2) composite containing about 16 wt\% of <6 nm sized Co/Co(OH)(2) nPs is prepared on a N-rich COF support that catalyzes the release of theoretical equivalence of H-2 from readily available, safe, and cheap NaBH4. Furthermore, the released H-2 is utilized for the hydrogenation of nitrile and nitro compounds to amines under ambient conditions in a facile one-pot reaction. The COF "by choice" is built from "methoxy" functionalized dialdehydes which is crucial in enabling the complete retention of the COF structure under the conditions of the catalysis, where the regular Schiff bonds would have hydrolyzed. The N-rich binding pockets in the COF ensure strong nP-COF interactions, which provides stability and enables catalyst recycling. Modeling studies reveal the crucial role played by the COF in exposing the active facets and thereby in controlling the activation of the reducing agent. Additionally, via density functional theory, we provide a rational explanation for how these COFs can stabilize nanoparticles which grow beyond the limiting pore size of the COF and yet result in a truly stable heterogeneous catalyst - a ubiquitous observation. The study underscores the versatility of COF as a heterogeneous support for developing cheap and highly active nonnoble metal catalysts.}, doi = {10.1002/smll.201801233}, author = {Mullangi, Dinesh and Chakraborty, Debanjan and Pradeep, Anu and Koshti, Vijay and Vinod, Chathakudath P. and Panja, Soumendranath and Nair, Sunil and Vaidhyanathan, Ramanathan} } @article {44233, title = {High-performance field emission device utilizing vertically aligned carbon nanotubes-based pillar architectures}, journal = {AIP Advances}, volume = {8}, year = {2018}, month = {JAN}, pages = {015117}, type = {Article}, abstract = {

The vertical aligned carbon nanotubes (CNTs)-based pillar architectures were created on laminated silicon oxide/silicon (SiO2/Si) wafer substrate at 775 degrees C by using water-assisted chemical vapor deposition under low pressure process condition. The lamination was carried out by aluminum (Al, 10.0 nm thickness) as a barrier layer and iron (Fe, 1.5 nm thickness) as a catalyst precursor layer sequentially on a silicon wafer substrate. Scanning electron microscope (SEM) images show that synthesized CNTs are vertically aligned and uniformly distributed with a high density. The CNTs have approximately 2-30 walls with an inner diameter of 3-8 nm. Raman spectrum analysis shows G-band at 1580 cm(-1) and D-band at 1340 cm(-1). The G-band is higher than D-band, which indicates that CNTs are highly graphitized. The field emission analysis of the CNTs revealed high field emission current density (4mA/cm(2) at 1.2V/mu m), low turn-on field (0.6 V/mu m) and field enhancement factor (6917) with better stability and longer lifetime. Emitter morphology resulting in improved promising field emission performances, which is a crucial factor for the fabrication of pillared shaped vertical aligned CNTs bundles as practical electron sources. (c) 2018 Author(s).

}, issn = {2158-3226}, doi = {10.1063/1.5004769}, author = {Gupta, Bipin Kumar and Kedawat, Garima and Gangwar, Amit Kumar and Nagpal, Kanika and Kashyap, Pradeep Kumar and Srivastava, Shubhda and Singh, Satbir and Kumar, Pawan and Suryawanshi, Sachin R. and Seo, Deok Min and Tripathi, Prashant and More, Mahendra A. and Srivastava, O. N. and Hahm, Myung Gwan and Late, Dattatray J.} } @article {45373, title = { Homo- and heterodimeric dyes for dye-sensitized solar cells: panchromatic light absorption and modulated open circuit potential}, journal = {ChemPlusChem}, volume = {83}, year = {2018}, month = {NOV}, pages = { 998-1007}, type = {Article}, abstract = {The design of dyes for panchromatic light absorption has attracted much attention in the field of dye-sensitized solar cells (DSSCs). An approach to enhance panchromatic light absorption utilizes mixtures of complementary light-absorbing dyes as well as dyes with specific anchoring groups that facilitate interfacial charge transfer with TiO2. Dipole-dipole interactions between the dye molecules on the surface broaden the spectrum, which results in decreased DSSC device performance. However, controlled aggregation of dyes results in broadening the spectral profile along with enhanced photocurrent generation. To control the dye-dye interaction, dimeric dyes with different dipole lengths D-1-D-sq, D-sq-D(sq)were systematically designed and synthesized. The photophysical and electrochemical properties were evaluated and the E-HOMO and E-LUMO levels were determined; these energy levels determines the electron injection from E-LUMO of the dye to E-CB of TiO2 and regeneration of oxidized dye by the electrolyte, respectively. The absorption spectra of D-sq-D-sq, D-1-D-sq were broadened in solution compared to model dye D-sq; this indicates that the dye-dye interaction is prominent in solution. In D-1-D-sq excitation energy transfer between photoexcited D-1 and D-sq was explained by using Forster resonance energy transfer (FRET). The homodimeric dye showed a device performace of 2.8 \% (V-oc 0.607, J(sc) 6.62 mA/cm(2), ff 69.3 \%),whereas the heterodimeric dye D-1-D-sq showed a device performance of 3.9 \% (V-oc 0.652 V, J(sc) 8.89 mA/cm(2), ff 68.8 \%). The increased photocurrent for D-1-D(sq)is due to the panchromatic IPCE response compared to D-sq-D-sq. The increased V(oc)is due to the effective passivation of the TiO2 surface by the spirolinker, and the effective dipole moment that shifts the conduction band on TiO2. Hence, the open circuit potential, V-oc, for the devices prepared from D-sq, D-1-D-sq and D-sq-D(sq)were systematically modulated by controlling the intermolecular pi-pi and intramolecular dipole-dipole interactions of the dimeric dyes.}, issn = { 2192-6506}, doi = {10.1002/cplu.201800450}, author = {Sil, Manik Chandra and Sudhakar, Vediappan and Singh, Ambarish Kumar and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {45404, title = { HPW anchored Meso-HZ-5, a novel catalyst for selective synthesis of ethyl levulinate biofuel by alcoholysis of biomass-derived furfuryl alcohol}, journal = {Environmental Progress \& Sustainable Energy}, volume = {37}, year = {2018}, month = {SEP}, pages = {1736-1742}, type = {Article}, abstract = {Ethanolysis of biomass derived furfuryl alcohol (FA) produces ethyl levulinate (EL), a biofuel additive and precursor for -valerolactone synthesis. The present study is devoted to develop an efficient and an environmentally benign catalytic system for one-pot conversion of FA to EL biofuel, by revealing an insight of the catalytic mechanism. The catalytic activity of H-ZSM-5, Meso-HZ-5 (desilicated H-ZSM-5) and different percentage H3PW12O40(HPW) anchored to Meso-HZ-5 catalysts have been evaluated for the FA ethanolysis. As per our knowledge, this is the first research reporting the application of HPW anchored to Meso-HZ-5 catalysts for the conversion of FA into EL in biomass utilization. These catalysts were synthesized and characterized by Powder X-ray diffraction (XRD), N-2 physisorption and temperature programmed NH3 desorption (TPAD). Products of FA ethanolysis viz., 4,5,5-triethoxypentan-2-one (TEP), ethoxy-methyl- furan (EMF), diethyl ether (DEE), EL were identified by Gas Chromatography-Mass Spectroscopy (GC-MS) and quantified by flame ionization detector (GC-FID). The physicochemical properties of catalysts were found to correlate to the product distribution matrix. Moreover, influences of several process parameters such as catalyst amount, reactant molar ratio, temperature and time on the extent of FA ethanolysis were systematically investigated. Under optimized conditions, 15\% (w/w) HPW/Meso-HZ-5 exhibited a remarkable catalytic performance with complete FA conversion (100\%) along with 97\% yield of EL, these activity values are superior than the previously reported studies. The present study provides an insight of the catalytic mechanism along with a potential environmental benign and the economic catalyst for the efficient synthesis of EL biofuel from the biomass-derived FA}, doi = { 10.1002/ep.12822}, author = {Nandiwale, Kakasaheb Y. and Pande, Ashwini M. and Bokade, Vijay V.} } @article {45534, title = {HPW anchored Meso-HZ-5, a novel catalyst for selective synthesis of ethyl levulinate biofuel by alcoholysis of biomass-derived furfuryl alcohol}, journal = {Environmental progress and sustainable energy}, volume = {37}, year = {2018}, month = {NOV}, pages = {1736-1742}, type = {Article}, abstract = {thanolysis of biomass derived furfuryl alcohol (FA) produces ethyl levulinate (EL), a biofuel additive and precursor for γ-valerolactone synthesis. The present study is devoted to develop an efficient and an environmentally benign catalytic system for one-pot conversion of FA to EL biofuel, by revealing an insight of the catalytic mechanism. The catalytic activity of H-ZSM-5, Meso-HZ-5 (desilicated H-ZSM-5) and different percentage H3PW12O40(HPW) anchored to Meso-HZ-5 catalysts have been evaluated for the FA ethanolysis. As per our knowledge, this is the first research reporting the application of HPW anchored to Meso-HZ-5 catalysts for the conversion of FA into EL in biomass utilization. These catalysts were synthesized and characterized by Powder X-ray diffraction (XRD), N2 physisorption and temperature programmed NH3 desorption (TPAD). Products of FA ethanolysis viz., 4,5,5-triethoxypentan-2-one (TEP), ethoxy-methyl- furan (EMF), diethyl ether (DEE), EL were identified by Gas Chromatography-Mass Spectroscopy (GC-MS) and quantified by flame ionization detector (GC-FID). The physicochemical properties of catalysts were found to correlate to the product distribution matrix. Moreover, influences of several process parameters such as catalyst amount, reactant molar ratio, temperature and time on the extent of FA ethanolysis were systematically investigated. Under optimized conditions, 15\% (w/w) HPW/Meso-HZ-5 exhibited a remarkable catalytic performance with complete FA conversion (100\%) along with 97\% yield of EL, these activity values are superior than the previously reported studies. The present study provides an insight of the catalytic mechanism along with a potential environmental benign and the economic catalyst for the efficient synthesis of EL biofuel from the biomass-derived FA.}, issn = {1944-7450}, doi = {10.1002/ep.12822}, author = {Nandiwale, Kakasaheb Y. and Pande, Ashwini M. and Bokade, Vijay V.} } @article {44213, title = {HxZr3-xPW12O40 as an insoluble and reusable heteropolyacid for highly selective dehydration of fructose to 5-hydroxymethyl fufural in DMSO system}, journal = {Chemistryselect}, volume = {3}, year = {2018}, month = {JAN}, pages = {832-836}, type = {Article}, abstract = {Dehydration of fructose is a way to produce an important platform chemical such as 5-hydroxymethylfurfural (HMF) which is widely used to synthesize variety of renewable chemicals and fuel. Heteropoly acid, H3PW12O40 is highly soluble strong acidic catalyst with well-defined structure. This study reports the modification of soluble heteropoly acid to insoluble and reusable heteropolyacid (HxZr3-xPW12O40 ) by exchanging with Zr and investigation of its catalytic performance in selective transformation of renewable fructose to 5-HMF in Dimethyl sulfoxide (DMSO) system. The physico-chemical properties of H(x)Zr(3-x)PW(12)O(40)were derived from Powder-XRD, NH3-TPAD and FT-IR technique. The characterization of HxZr3-xPW12O40 revealed that the Keggin structure of HPA remained intact as proton replaced by Zr. The partial exchange of Zr in H2Zr1PW12O40 catalyst resulted in an increase in acidity, however further increase of Zr above 1, acidity was found to be decreased. At optimized reaction condition, 5-HMF yield of 85\% with 100\% selectivity was achieved with H1Zr2 PW12O40 catalyst at much lower reaction time of 10 min than reported. The catalyst was observed to be recoverable, reusable as compared to parent H3PW12O40.}, doi = {10.1002/slct.201702669}, author = {Mulik, Nagesh L. and Niphadkar, Prashant S. and Pandhare, Kiran V. and Bokade, Vijay V.} } @article {44356, title = {Hydrothermal synthesis of rGO-PbBi2Se4 composite and investigation of its structural, chemical and field emission properties}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {29}, year = {2018}, month = {JUN}, pages = {10494-10503}, type = {Article}, abstract = {In the present study we report the one step facile synthesis of pristine lead bismuth selenide (PbBi2Se4) and reduced graphene oxide (rGO) and its composites with PbBi2Se4. Formation of pristine PbBi2Se4 and rGO-PbBi2Se4 composite were confirmed by X-ray diffraction and X-ray photoelectron spectroscopy. The surface morphology and topography investigated by using scanning electron microscopy and transmission electron microscopy revealed the formation of nano-flowers pristine PbBi2Se4. After coupling pristine PbBi2Se4 with rGO the surface morphology shows the formation of sharp vertically protruded nano-sheets/nano-flaks originated from the nano-flowers. Finally, the field emission properties of pristine PbBi2Se4 and rGO-PbBi2Se4 composite have been investigated. It has been observed that the rGO-PbBi2Se4 composite emitter exhibited excellent field emission properties with low turn-on field (similar to 2.8 V/A mu m for 10 A mu A/cm(2)), high emission current density (similar to 1288 A mu A/cm(2) at 3.9 V/A mu m) and superior current stability (similar to 4.5 h for similar to 1 A mu A) compare to pristine PbBi2Se4 emitter. Thus, the facile one step synthesis approach and robust nature of rGO-PbBi2Se4 composite emitter can provide prospects for the future development of large-area emitter applications such as flat-panel-display and vacuum micro/nanoelectronics devices.}, doi = {10.1007/s10854-018-9114-0}, author = {Aher, Rahul and Bhorde, Ajinkya and Sharma, Priyanka and Nair, Shruthi and Borate, Haribhau and Pandharkar, Subhash and Rondiya, Sachin and Chaudhary, Minakshi and Gopinath, Chinnakonda and Suryawanshi, Sachin and More, Mahendra and Jadkar, Sandesh} } @article {44497, title = {Identification of potent chromone embedded [1,2,3]-triazoles as novel anti-tubercular agents}, journal = {Royal Society Open Science}, volume = {5}, year = {2018}, month = {APR}, pages = {Article Number: 171750}, abstract = {A series of 20 novel chromone embedded [1,2,3]-triazoles derivatives were synthesized via an easy and convenient synthetic procedure starting from 2-hydroxy acetophenone. The in vitro anti-mycobacterial evaluation studies carried out in this work reveal that seven compounds exhibit significant inhibition against Mycobacterium tuberculosis H37Rv strain with MIC in the range of 1.56-12.5 mu g ml(-1). Noticeably, compound 6s was the most potent compound in vitro with a MIC value of 1.56 mu g ml(-1). Molecular docking and chemoinformatics studies revealed that compound 6s displayed drug-like properties against the enoyl-acyl carrier protein reductase of M. tuberculosis further establishing its potential as a potent inhibitor.}, doi = {10.1098/rsos.171750}, author = {Nalla, Viswanadh and Shaikh, Aslam and Bapat, Sanket and Vyas, Renu and Karthikeyan, M. and Yogeeswari, P. and Sriram, D. and Muthukrishnan, M.} } @conference {44598, title = {Impact of stereochemistry on sharing chemical structures}, booktitle = {255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water}, year = {2018}, month = {MAR}, publisher = {ACS, 1155 16TH ST, NW, Washington, DC 20036 USA}, organization = {ACS, 1155 16TH ST, NW, Washington, DC 20036 USA}, address = {New Orleans, LA}, author = {Banik, Gregory and Karthikeyan, Muthukumarasamy and Nedwed, Karl and Kunitsky, Keith and D{\textquoteright}Souza, Michelle and Abshear, Ty} } @article {44501, title = {Improved stability of tuberculosis drug fixed-dose combination using isoniazid-caffeic acid and vanillic acid cocrystal}, journal = {Journal of Pharmaceutical Sciences}, volume = {107}, year = {2018}, month = {JUN}, pages = {1667-1679}, abstract = {The classic fixed-dose combination (FDC) of 4 tuberculosis drugs, namely rifampicin (RIF), isoniazid (INH), pyrazinamide (PZA), and ethambutol dihydrochloride (EDH) has the twin issues of physical stability and RIF cross-reaction in the 4-FDC. The major reason for these quality issues is the interaction between RIF and INH to yield isonicotinyl hydrazone in drug tablets. Pharmaceutical cocrystals of INH with caffeic acid (CFA) (PZA + EDH + RIF + INH-CFA cocrystal) and vanillic acid (VLA) (PZA + EDH + RIF + INH-VLA cocrystal) are able to stabilize the FDC formulation compared with the reference batch (PZA + EDH + RIF + INH). Stability studies under accelerated humidity and temperature stress conditions of 40{\textdegree}C and 75\% relative humidity showed that the physical stability of the cocrystal formulation was superior by powder X-ray diffraction and scanning electron microscopy analysis, and chemical purity was analyzed by high-performance liquid chromatography. Changes in the composition and structure were monitored on samples drawn at 7, 15, 22, and 30 days of storage. FDC-INH-CFA cocrystal batch exhibited greater stability compared with FDC-INH-VLA cocrystal and FDC reference drug batches. The superior stability of INH-CFA cocrystal is attributed to the presence of stronger hydrogen bonds and cyclic O-H...O synthon in the crystal structure.}, doi = {10.1016/j.xphs.2018.02.014}, author = {Battini, Swapna and Mannava, M. K. Chaitanya and Nangia, Ashwini Kumar} } @article {44635, title = {In situ nanoparticle embedding for authentication of epoxy composites}, journal = {Advanced Materials}, volume = {30}, year = {2018}, month = {AUG}, pages = {1801523}, abstract = {

In situ reduction of chloroauric acid inside an amine-cured epoxy matrix leads to formation of gold nanoparticles which are embedded inside the part. This phenomenon is leveraged to design an authentication system for composites wherein the particles are embedded spatially and are invisible to the naked eye. Under UV light, the particles diffract light and create an easily visible path. The particles penetrate inside the part and create a permanent, cost-effective, tamper-proof code. The advantage of this technique is that this authentication system can be built in composite parts after fabrication of the composite structure. As very small amount (nanograms) of particles are present in the part, negligible change in the thermal characteristics of the parent matrix is observed. The particles can be embedded easily in carbon fiber as well as glass fiber reinforced epoxy structures.

}, keywords = {authentication, barcoding, composites, embedded nanoparticles, Epoxy}, issn = {0935-9648}, doi = {10.1002/adma.201801523}, author = {Pansare, Amol V. and Khairkar, Shyam R. and Shedge, Amol A. and Chhatre, Shraddha Y. and Patil, Vishwanath R. and Nagarkar, Amit A.} } @article {44503, title = { In vitro propagation of Digitalis lanata Ehrh. through direct shoot regeneration - A source of cardiotonic glycosides}, journal = {Industrial Crops and Products}, volume = {121}, year = {2018}, month = {OCT}, pages = {313-319}, type = {Article}, abstract = {

An efficient method for the in vitro propagation of Digitalis lanata Ehrh. through direct organogenesis from leaf and petiole explants has been standardised. MS basal medium supplemented with cytokinins BAP, KIN, TDZ either alone or along with auxins IAA and NAA at different concentrations were tried. TDZ at 4.54 and 6.81 μmol/l were optimum for direct regeneration of shoots from leaf (4.4 {\textpm} 0.6 shoots/explant), and petiole (3.0 {\textpm} 0.8 shoots/explant) explants respectively. Among the various concentrations of auxins IAA, IBA and NAA tried for rooting, the best response occurred on MS basal medium supplemented with 17.13 μmol/l IAA. On greenhouse transfer about 60\% of the plantlets survived. In vitro raised plantlets were morphologically similar to mother plants. Cardiotonic glycosides digoxin and digitoxin were extracted by modified methods and estimated by HPLC. There were no significant differences in digoxin and digitoxin content in leaves of naturally grown and in vitro raised plants. The method for in vitro propagation of D. lanata through direct organogenesis from leaf and petiole explants reported here will be of great use for the rapid and large scale clonal propagation, production of biomass for extraction of cardiotonic glycosides, ex situ conservation, and improvement through conventional plant breeding and transgenic methods.

}, issn = { 0926-6690}, doi = {10.1016/j.indcrop.2018.05.019}, author = {Bhushan Bhusare and John, C. K. and Bhatt, V. P. and Nikam, T. D.} } @article {45372, title = {Indenoquinaldine-based unsymmetrical squaraine dyes for near-infrared absorption: investigating the steric and electronic effects in dye-sensitized solar cells}, journal = {Chemistry-A European Journal}, volume = {24}, year = {2018}, month = {NOV}, pages = {16368-16378}, type = {Article}, abstract = {A series of near-infrared (NIR)-responsive unsymmetrical squaraine dyes (ISQ1-3) incorporating a fused indenoquinaldine-based donor have been designed and synthesized. C-12 alkyl chains were incorporated at the sp(3)-hybridized carbon center of the indene unit of the indenoquinaldine in an out-of-plane orientation to control dye aggregation on the surface of titanium dioxide, and indole (ISQ1), benzo[e]indole (ISQ2), and quinoline (ISQ3) moieties were included as the donor component bearing the anchoring carboxy group to extend the absorption in the NIR region and to systematically study the effect of the electronic modification on the performance of dye-sensitized solar cells (DSSC). All the dyes exhibit intense absorption (epsilon >= 10(5) m(-1) cm(-1)) in the NIR region, and the dye-adsorbed TiO2 films exhibit broad panchromatic absorption. The incident photon-to-current efficiency (IPCE) spectrum of the ISQ3-based DSSC device displays a panchromatic IPCE response up to 880 nm. Additionally, the ISQ3-sensitized device provides the best efficiency of 4.15\% with a short circuit current density (J(SC)) of 10.02 mA cm(-2), open-circuit voltage (V-OC) of 0.58V, and fill factor (ff) of 72\% in the presence of 10 equivalents of 3 alpha,7 alpha-dihydroxy-5 beta-cholanic acid (CDCA). Electrochemical impedance spectroscopy analysis showed attenuated charge recombination in the ISQ3-sensitized DSSC, which contributes to its higher value of V-OC compared with the other dyes.}, issn = { 0947-6539}, doi = {10.1002/chem.201803062}, author = {Bisht, Rajesh and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {45570, title = {Integrated electronic, optical, and structural features in pseudo-3D mesoporous TiO2{\textendash}X delivering enhanced dye-sensitized solar cell performance}, journal = {ACS omega}, volume = {3}, year = {2018}, month = {FEB}, pages = {1645 - 1652}, type = {Article }, abstract = {The performance of a dye-sensitized solar cell (DSSC) is strongly affected by optical, structural, and electronic features of a photoanode. In this article, meso-TiO2{\textendash}X was prepared by a solution combustion method and hydrogenation at high pressure. The properties of DSSCs with meso-TiO2{\textendash}X photoanodes were investigated by photocurrent{\textendash}voltage, incident photon-to-current conversion efficiency, and electrochemical impedance spectroscopy (EIS) measurements. The meso-TiO2{\textendash}X materials exhibit new electronic states and aided to absorb in the visible region because of the narrow band gap. Facile charge transfer from the N719 dye to the TiO2 photoanode was assisted by low-lying mid-gap states. Electrically integrated nanoparticles, with a small-channel mesoporous framework, facilitates fast charge transport across the material. Furthermore, EIS has shown that chemical capacitance, recombination resistance, and electron lifetime were affected by hydrogenation, thus indicating an effect on the photoanode material charge dynamics of DSSCs. An η of 7.2\% under AM 1.5G illumination is obtained and an improvement by 75.6\% over Degussa P25 titania. This is attributed to improved light harvesting and charge collection by the meso-TiO2{\textendash}X photoanode obtained via simple combustion synthesis.}, issn = {2470-1343}, doi = {10.1021/acsomega.7b01812}, author = {Negi, S. S.} } @article {44240, title = {Interaction of polymers with amyloidogenic peptides}, journal = {Polymer International}, volume = {67}, year = {2018}, month = {JAN}, pages = {15-24}, type = {Article}, abstract = {

With this review, the aim was to gather recent representative publications which describe the interaction of polymers with amyloidogenic peptides/proteins. When functional, these take part in for instance bacterial adhesion and biofilm formation. However, several of the peptides/proteins have been identified in various diseases. One of the current approaches to discover a cure against these relies on therapeutics which either prevent or accelerate peptide/protein aggregation and/or clear readily formed aggregates. Owing to the common interest of scientists from all disciplines to identify a cure against the diseases of public health concern, there are overwhelming numbers of publications dealing with these two approaches. Since amyloid aggregation could be regarded as a nucleated polymerization, which is an established mechanism of polymer self-assembly, we recently tackled the issue of amyloid aggregation using the theories and methods established in polymer science. In this review, we hence focus on gathering relevant and recent publications which describe the role of polymers in modulating the aggregation of amyloidogenic peptides/proteins. (c) 2017 Society of Chemical Industry

}, keywords = {amyloid, neurodegenerative diseases, Polymer, protein, Self-assembly}, issn = {0959-8103}, doi = {10.1002/pi.5483}, author = {Abraham, Jancy Nixon and Nardin, Corinne} } @article {45355, title = { KLTL-MCM-41 micro-mesoporous composite as a solid base for the hydrogenation of sugars }, journal = {Catalysis Science \& Technology}, volume = {8}, year = {2018}, month = {DEC}, pages = { 6429-6440}, type = {Article}, abstract = {An approach to the synthesis of KLTL-MCM-41 micro-mesoporous composites of varying SiO2/Al2O3 molar ratio (20-8) was designed by following green technology. The synthesis was based on the recycling of waste mother liquor containing preformed KLTL zeolite crystals and unutilized reagents. The micro-mesoporous composites consist of KLTL zeolite crystals preformed through hydrothermal treatment in the first step. In the second step, the siliceous mother liquor was transformed into mesoporous MCM-41. The physico-chemical properties of the KLTL-MCM-41 micro-mesoporous composites were determined by PXRD, ICP-OES, FTIR, CO2-TPD, Al-27 MAS-NMR, TEM-EDX, HRTEM, and N-2 adsorption-desorption measurements. The mesopores properties of the KLTL-MCM-41 composites depended on the SiO2/Al2O3 molar ratio. The characterization results led to the following conclusions with decreasing SiO2/Al2O3 molar ratio: 1) decreasing order of the mesophase, 2) decreasing wall thickness of the mesopores, and 3) decreasing BET surface area and pore volume. Al-27 MAS-NMR spectra showed that only tetrahedrally coordinated aluminium was contained in zeolite KLTL. Moreover, the total amount and the strength of the basic sites of the KLTL-MCM-41 micro-mesoporous composites owing to the exchangeable potassium content (Al/K ratio approximate to 1) decreased in the order: 8 MMC > 10 MMC > 15 MMC > 20 MMC. The catalytic activity of the synthesized micro-mesoporous samples as a solid base was tested for the hydrogenation of xylose to sugar alcohols}, issn = {2044-4753}, doi = {10.1039/c8cy01716f}, author = {Tangale, Nilesh P. and Niphadkar, Prashant S. and Joshi, Praphulla N. and Dhepe, Paresh L.} } @article {45360, title = {Machine learning prediction of interaction energies in rigid water clusters}, journal = {Physical Chemistry Chemical Physics }, volume = {20}, year = {2018}, month = {SEP}, pages = {22987-22996}, type = {Article}, abstract = {Classical force fields form a computationally efficient avenue for calculating the energetics of large systems. However, due to the constraints of the underlying analytical form, it is sometimes not accurate enough. Quantum mechanical (QM) methods, although accurate, are computationally prohibitive for large systems. In order to circumvent the bottle-neck of interaction energy estimation of large systems, data driven approaches based on machine learning (ML) have been employed in recent years. In most of these studies, the method of choice is artificial neural networks (ANN). In this work, we have shown an alternative ML method, support vector regression (SVR), that provides comparable accuracy with better computational efficiency. We have further used many body expansion (MBE) along with SVR to predict interaction energies in water clusters (decamers). In the case of dimer and trimer interaction energies, the root mean square errors (RMSEs) of the SVR based scheme are 0.12 kcal mol(-1) and 0.34 kcal mol(-1), respectively. We show that the SVR and MBE based scheme has a RMSE of 2.78\% in the estimation of decamer interaction energy against the parent QM method in a computationally efficient way.}, doi = {10.1039/c8cp03138j}, author = {Bose, Samik and Dhawan, Diksha and Nandi, Sutanu and Sarkar, Ram Rup and Ghosh, Debashree} } @article {44354, title = {Magnetically tunable liquid dielectric with giant dielectric permittivity based on core-shell superparamagnetic iron oxide}, journal = {Nanotechnology}, volume = {29}, year = {2018}, month = {JUL}, pages = {Article Number: 265707}, type = {Article}, abstract = {A liquid dielectric based on a core-shell architecture having a superparamagnetic iron oxide core and a shell of silicon dioxide was synthesized. The frequency dependence of dielectric properties was evaluated for different concentrations of iron oxide. The dependence of magnetic field on the dielectric properties was also studied. Aqueous ferrofluid exhibited a giant dielectric constant of 6.4 x 10(5) at 0.1 MHz at a concentration of 0.2 vol\% and the loss tangent was 3. The large rise in dielectric constant at room temperature is modelled and explained using percolation theory and Maxwell-Wagner-Sillars type polarization. The ferrofluid is presumed to consist of nanocapacitor networks which are wired in series along the lateral direction and parallel along longitudinal direction. On the application of an external magnetic field, the chain formation and its alignment results in the variation of dielectric permittivity.}, doi = {10.1088/1361-6528/aabc4e}, author = {Vinayasree, S. and Nitha, T. S. and Tiwary, C. S. and Ajayan, P. M. and Joy, P. A. and Anantharaman, M. R.} } @article {45476, title = {Manganese catalyzed N-alkylation of anilines with alcohols: ligand enabled selectivity}, journal = {Organic and biomolecular chemistry }, volume = {16}, year = {2018}, month = {NOV}, pages = {8175-8180}, type = {Article }, abstract = {Ligand enabled Earth-abundant manganese catalyzed N-alkylation of amines with alcohols via a hydrogen auto-transfer strategy is reported. The choice of the ligand plays a significant role in the alcohol reactivity (aliphatic or aromatic) toward N-alkylation reactions.}, issn = {1477-0520}, doi = {10.1039/c8ob01886c}, author = {Landge, Vinod G. and Mondal, Akash and Kumar, Vinit and Nandakumar, Avanashiappn and Balaraman, Ekambaram} } @article {45392, title = {Melamine formaldehyde-metal organic gel interpenetrating polymer network derived intrinsic Fe-N-doped porous graphitic carbon electrocatalysts for oxygen reduction reaction}, journal = {New Journal of Chemistry }, volume = {42}, year = {2018}, month = {DEC}, pages = {18690-18701}, type = {Article}, abstract = {Fe, N doped porous graphitic carbon electrocatalyst (Fe-MOG-MF-C), obtained by pyrolysis of an Interpenetrating Polymer Network (IPN) comprised of melamine formaldehyde (MF as hard segment) and Metal-Organic Gel (MOG as soft segment), exhibited significant Oxygen Reduction Reaction (ORR) activity in alkaline medium. BET surface area analysis of Fe-MOG-MF-C showed high surface area (821 m(2) g(-1)), while TEM, Raman and XPS results confirmed Fe and N co-doping. Furthermore, a modulated porous morphology with a higher degree of surface area (950 m(2) g(-1)) has been accomplished for the system (Fe-MOG-MFN-C) when aided by a sublimable porogen, such as naphthalene. XPS results further demonstrated that these systems exhibited a better degree of distribution of graphitic N and an onset potential value of 0.91 V vs. RHE in 0.1 M KOH solution following an efficient four-electron ORR pathway. The electrocatalytic activity of Fe-MOG-MFN-C is superior to that of Fe-MOG-MF-C by virtue of its higher graphitic N content and surface area. Thus, the study presents a new class of IPN derived MF-MOG nanocomposites with the potential to generate extended versions of in situ Fe-N doped porous graphitic carbon structures with superior ORR activity.}, issn = {1144-0546}, doi = {10.1039/c8nj03170c}, author = {Shijina, Kottarathil and llathvalappil, Rajith and Sumitha, N. S. and Sailaja, G. S. and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchig, Takeo and Hareesh, U. S.} } @article {44594, title = {MiRNA160 is associated with local defense and systemic acquired resistance against Phytophthora infestans infection in potato}, journal = {Journal of Experimental Botany}, volume = {69}, year = {2018}, month = {APR }, pages = {2023-2036}, abstract = {

To combat pathogen infection, plants employ local defenses in infected sites and elicit systemic acquired resistance (SAR) in distant tissues. MicroRNAs have been shown to play a significant role in local defense, but their association with SAR is unknown. In addition, no such studies of the interaction between potato and Phytophthora infestans have been reported. We investigated the role of miR160 in local and SAR responses to P. infestans infection in potato. Expression analysis revealed induced levels of miR160 in both local and systemic leaves of infected wild-type plants. miR160 overexpression and knockdown plants exhibited increased susceptibility to infection, suggesting that miR160 levels equivalent to those of wild-type plants may be necessary for mounting local defense responses. Additionally, miR160 knockdown lines failed to elicit SAR, and grafting assays indicated that miR160 is required in both local and systemic leaves to trigger SAR. Consistently, SAR-associated signals and genes were dysregulated in miR160 knockdown lines. Furthermore, analysis of the expression of defense and auxin pathway genes and direct regulation of StGH3.6, a mediator of salicylic acid-auxin cross-talk, by the miR160 target StARF10 revealed the involvement of miR160 in antagonistic cross-talk between salicylic acid-mediated defense and auxin-mediated growth pathways. Overall, our study demonstrates that miR160 plays a crucial role in local defense and SAR responses during the interaction between potato and P. infestans.

}, keywords = {Auxin-salicylic acid antagonism, microRNA, miR160, Phytophthora infestans, Solanum chacoense, Solanum tuberosum, systemic acquired resistance}, issn = {0022-0957}, doi = {10.1093/jxb/ery025}, author = {Natarajan, Bhavani and Kalsi, Harpreet S. and Godbole, Prajakta and Malankar, Nilam and Thiagarayaselvam, Aarthy and Siddappa, Sundaresha and Thulasiram, Hirekodathakallu V. and Chakrabarti, Swarup K. and Banerjee, Anjan K.} } @article {44593, title = {Modulated photochemical reactivities of O-acetylated (3{\textquoteright}, 5{\textquoteright}-dimethoxyphenyl) heteroaryl acyloin derivatives under direct irradiation and photo-induced electron transfer conditions}, journal = {Photochemical \& Photobiological Sciences}, volume = {17}, year = {2018}, month = {JUN }, pages = {835-845}, abstract = {

3{\textquoteright}, 5{\textquoteright}-Dimethoxybenzoin esters are important photoremovable protecting groups which form 2-phenylbenzofuran derivatives upon photo-release. We utilized a similar concept to test a photochemical method of installing a benzofuran moiety to the conjugated backbone by subjecting O-acetylated (3{\textquoteright}, 5{\textquoteright}-dimethylphenyl) heteroaryl acyloin derivatives through direct photo irradiation and a photo-induced electron transfer reaction. These photochemical methods were explored for a variety of heteroaromatic substrates appended on the ketone part of the O-acetylated cross-acyloin derivatives. The furan, thiophene and bithiophene derivatives led to the expected cyclized (benzofuran capped) products but the derivatives with extended conjugation decomposed under direct irradiation. However, under irradiation in the presence of an electron donor such as triethylamine, the extended acyloin derivatives afforded both cyclized and deacetoxylated products. The semiconducting nature of the extended cyclized products was also explored and tested for solution-processed organic field effect transistors, providing a maximum hole mobility of 1.3 x 10(-6) cm(2) V-1 s(-1).

}, issn = {1474-905X}, doi = {10.1039/c8pp00082d}, author = {Bisht, Rajesh and Singh, Saumya and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {44530, title = {Modulation of reactivity of singlet radical pair in continuous flow: photo-fries rearrangement}, journal = {Journal of Photochemistry and Photobiology A: Chemistry}, volume = {364}, year = {2018}, month = {JUN}, pages = { 316-321}, type = {Article}, abstract = {

Photo-Fries rearrangement of phenyl benzoate is studied using continuous flow for modulating the reactivity of singlet radical pair by changing the viscosity of the solvent. The effect of flow and proximity of the reactants with the light source on the reactivity of radical pair, formed from singlet excited state was investigated in details. In non-viscous solvent, the results from flow synthesis were comparable to batch reactor. In viscous solvents, selectivity of ortho- and para-isomers (o-/p- isomer) of the product could be controlled by changing viscosity as well as the flow rate. Using flow synthesis, ortho- and para-isomer ratio was obtained as high as 8.45 which are twice as compared to batch experiment with in fraction of residence time.

}, doi = {10.1016/j.jphotochem.2018.06.014}, author = {Karjule, Neeta and Sharma, Mrityunjay K. and Nithyanandhan, Jayaraj and Kulkarni, Amol} } @article {44637, title = {Morphological ensembles of N-doped porous carbon derived from ZIF-8/Fe-graphene nanocomposites: processing and electrocatalytic studies}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {AUG}, pages = {8688-8697}, abstract = {

Engineering the active site density of porous carbon catalysts for enhanced electrocatalytic activity is the current focus in the quest for economically viable fuel cells. Herein, we synthesise ZIF-8/Fe-graphene composites for the formation of N and Fe co-doped carbon with diverse morphologies ranging from tubes and sheets to frameworks of carbon. A synthetic strategy involving the one pot synthesis of ZIF-8 based composites is accomplished by the reaction of 2-methylimidazole with mixed Zn/Fe salt solution containing graphene dispersions. The high temperature heat treatment of this precursor mix yielded micro-meso porous architectures of N, Fe co-doped carbon with dispersions of Fe/Fe3C. An onset potential value of 0.95 V and a half-wave potential of 0.82 V coupled with excellent durability and stability in alkaline medium indicated improved electrocatalytic performances over its commercial Pt/C counterpart. The appreciable electrocatalytic properties of the synthesized carbon are attributed to its morphological diversity, hybrid structure, high N doping and its heteroporous characteristics. The dispersed Fe/Fe3C and FeNx sites facilitated enhanced oxygen adsorption and the graphene inclusions in the composite provided retention of high nitrogen contents.

}, keywords = {electrocatalyst, fuel cell, N- Fe co-doped carbon, oxygen reduction reaction, ZIF-8}, issn = {2365-6549}, doi = {10.1002/slct.201801419}, author = {Thomas, Minju and Illathvalappil, Rajith and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {45471, title = { Ni-catalyzed alpha-alkylation of unactivated amides and esters with alcohols by hydrogen auto-transfer strategy }, journal = {CHEMSUSCHEM}, volume = {11}, year = {2018}, month = {NOV}, pages = {3911-3916}, type = {Article}, abstract = {A transition-metal-catalyzed borrowing hydrogen/hydrogen auto-transfer strategy allows the utilization of feedstock alcohols as an alkylating partner, which avoids the formation of stoichiometric salt waste and enables a direct and benign approach for the construction of C-N and C-C bonds. In this study, a nickel-catalyzed alpha-alkylation of unactivated amides and ester (tert-butyl acetate) is carried out by using primary alcohols under mild conditions. This C-C bond-forming reaction is catalyzed by a new, molecularly defined nickel(II) NNN-pincer complex (0.1-1 mol \%) and proceeds through hydrogen auto-transfer, thereby releasing water as the sole byproduct. In addition, N-alkylation of cyclic amides under Ni-catalytic conditions is demonstrated.}, doi = {10.1002/cssc.201801443}, author = {Midya, Siba P. and Rana, Jagannath and Pitchaimani, Jayaraman and Nandakumar, Avanashiappan and Madhu, Vedichi and Balaraman, Ekambaram} } @article {44597, title = {N-Methylation of isoDGR peptides: discovery of a selective alpha 5 beta 1-integrin ligand as a potent tumor imaging agent}, journal = {Journal of Medicinal Chemistry}, volume = {61}, year = {2018}, month = {MAR}, pages = {2490-2499}, type = {Article}, abstract = {

Specific targeting of the integrin subtype alpha 5 beta 1 possesses high potential in cancer diagnosis and therapy. Through sequential N-methylation, we successfully converted the biselective alpha 5 beta 1/alpha v beta 6 peptide c(phg-isoDGR-k) into a potent peptidic RGD binding aSfil subtype selective ligand c(phg-isoDGR-(NMe)k). Nuclear magnetic resonance spectroscopy and molecular modeling clarified the molecular basis of its improved selectivity profile. To demonstrate its potential in vivo, c(phg-isoDGR-(NMe)k) was trimerized with the chelator TRAP and used as a positron-emission tomography tracer for monitoring alpha 5 beta 1 integrin expression in a M21 mouse xenograft.

}, issn = {0022-2623}, doi = {10.1021/acs.jmedchem.7b01752}, author = {Kapp, Tobias G. and Di Leva, Francesco Saverio and Notni, Johannes and Raeder, Andreas F. B. and Fottner, Maximilian and Reichart, Florian and Reich, Dominik and Wurzer, Alexander and Steiger, Katja and Novellino, Ettore and Marelli, Udaya Kiran and Wester, Hans-Juergen and Marinelli, Luciana and Kessler, Horst} } @article {44607, title = {Novel benzylidenehydrazide-1,2,3-triazole conjugates as antitubercular agents: synthesis and molecular docking}, journal = {Mini Reviews in Medicinal Chemistry}, volume = {18}, year = {2018}, month = {JUL}, abstract = {Novel 1,2,3-triazole based benzylidenehydrazide derivatives were synthesized and evaluated for antitubercular activity against Mycobacterium tuberculosis (MTB) H37Ra, M. bovis BCG and cytotoxic activity. Most of the derivatives exhibited promising in vitro potency against MTB characterized by lower MIC values. Among all the synthesized derivatives, compound 6a and 6j were the most active against active and dormant MTB H37Ra, respectively. Compound 6d was significantly active against dormant and active M. bovis BCG. The structure activity relationship has been explored on the basis of anti-tubercular activity data. The active compounds were also tested against THP-1, A549 and Panc-1 cell lines and showed no significant cytotoxicity. Further, the synthesized compounds were found to have potential antioxidant with IC50 range = 11.19-56.64 μg/mL. The molecular docking study of synthesized compounds was performed against DprE1 enzyme of MTB to understand the binding interactions. Moreover, synthesized compounds were also analysed for ADME properties and from all the experimental results, the potency of compounds indicate that, this series considered as starting point for the developement of novel and more potent anti-tubercular agents in future.}, doi = {10.2174/1389557518666180718124858}, author = {Shaikh, Mubarak H. and Subhedar, Dnyaneshwar and Nawale, Laxman and Sarkar, Dhiman and Khan, Firoz A. Kalam and Sangshetti, Jaiprakash and Shingate, Bapurao B.} } @article {45365, title = { Novel pharmaceutical salts of albendazole}, journal = {Crystengcomm}, volume = {20}, year = {2018}, month = {NOV}, pages = { 6394-6405}, type = {Article}, abstract = {Albendazole (ABZ) is a class II safe and effective antihelmintic drug in the benzimidazole group according to the BCS (Biopharmaceutics Classification System) with low solubility (9 mg L-1) and high permeability (log P 2.54). Novel salts and salt hydrates of ABZ are reported with benzene and p-toluene sulfonic acid (BSA, PTSA), as well as carboxylic acids such as oxalic acid (OA), maleic acid (MLE), L-tartaric acid (LTA), 2,6-dihydroxybenzoic acid (2,6-DHBA), and 2,4,6-trihydroxybenzoic acid (2,4,6-THBA). The products ABZ-BSA, ABZ-BSA-H, ABZ-PTSA, ABZ-PTSA-H, ABZ-OA-H and ABZ-2,6-DHBA were confirmed by single crystal X-ray diffraction. In the hydrate structures (designated as -H), the water molecule acts as a bridge in the hydrogen bonding network. The salt formation of ABZ-MLE, ABZ-LTA, and ABZ-2,4,6-THBA was confirmed by N-15 ss-NMR based on the chemical shift change of ca. 50 ppm. The sulfonate salt hydrates exhibit 2D isostructurality, and position disorder in the thiopropyl group in the drug crystal structure was not observed in the salts. Crystal lattice energies were calculated for the MLE, LTA, and 2,4,6-THBA complexes of ABZ to confirm the molecular salt formation. The cocrystals of ABZ with the hydroxybenzene carboxylic acids are novel salts in the benzimidazole drugs class.}, author = {Bolla, Geetha and Nangia, Ashwini} } @article {44543, title = {Overexpression of mango alcohol dehydrogenase (MiADH1) mimics hypoxia in transgenic tomato and alters fruit flavor components}, journal = {Agri Gene}, volume = {7}, year = {2018}, month = {MAR}, pages = {23-33}, abstract = {Plant alcohols and aldehydes are produced by the action of alcohol dehydrogenases (ADH) and play an important role during fruit ripening and aroma production. Alcohols are not only produced in different tissues at different stages of plant development but are also products of the fermentative pathway which gets activated by different stresses, including hypoxia. The ADH gene is a well-established marker for hypoxic response as well as plant aroma. In a previous report we have identified and characterized three ADHs (MiADH1, 2, 3) from Dashehari mango. MiADH1 was found to be fruit specific and was upregulated by ethylene and ABA, suggesting a role in fruit aroma volatile production. In order to functionally characterize MiADH1, transgenic tomato plants were developed under the control of the constitutive (CaMV35S) promoter. Transgenic tomato fruit expressing MiADH1 gene showed a change in the levels of several alcohols and aldehydes related to flavor in comparison to the control. The change in aroma and volatiles compounds was more prominent during the ripe stage as compared to unripe and mid-ripe stages of tomato fruit. The transgenic tomato plants also produced adventitious roots. Our results suggest that the overexpression of MiADH1 in tomato plants induced the fermentative pathway in roots, and mimicked hypoxic response by development of adventitious roots from the stem as an adaptive mechanism.}, doi = {10.1016/j.aggene.2017.10.003}, author = {Singh, Rajesh Kumar and Srivastava, Smriti and Chidley, Hemangi and Nath, Pravendra and Sane, Vidhu A.} } @article {44603, title = {Pd(II)-Catalyzed gamma-C(sp(3))-H alkynylation of amides: selective functionalization of R chains of amides (RC)-C-1(O)NHR}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {JUL}, pages = {7483-7486}, abstract = {

The gamma C(sp(3))-H bond alkynylation of R chains of amides (RC)-C-1(O)NHR, a fundamental class of synthetic substrates, has not been accomplished to date. Here, the first example of palladium(ii)-catalyzed alkynylation of an unactivated gamma C(sp(3))-H bond of alkyl amides (cyclic, linear, and amino acids) is reported. The kinetic experiment shows that the rate of the reaction depends on the coupling partners and the amides. Late-stage diversification of alkynylated amides was developed by utilizing amine and alkyne functionalities.

}, issn = {1359-7345}, doi = {10.1039/c8cc03445a}, author = {Landge, Vinod G. and Parveen, Ayisha and Nandakumar, Avanashiappan and Balaraman, Ekambaram} } @article {44242, title = {pH dependent sophorolipid assemblies and their influence on gelation of silk fibroin protein}, journal = {Materials Chemistry and Physics}, volume = {203}, year = {2018}, month = {JAN }, pages = {9-16}, type = {Article}, abstract = {

Sophorolipid (SL), a bio-derived surfactant is an excellent gelling agent for natural fibrous protein, silk fibroin (SF) leading to potential biomedical applications. Interaction of SF with SL has been shown to accelerate the formation of hydrogel with the rate being dependent on the form of SL used. Here, we examine the effect of pH on SL-SF interaction and gel formation by employing rheology, fluorescence spectroscopy, SANS and NMR. The results indicate that the size of SL assemblies decrease as pH increases from acidic to alkaline and significantly impacts the association of SL and SF. The association of SF and SL is mainly via hydrophobic interactions, with the SL molecules forming bead like structures along the SF chain. The increased charge on the acidic form of SL at higher pH results in greater repulsion between acidic SL molecules, which are bound to the hydrophobic sites of SF, leading to rapid chain unfolding and subsequent gelation. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Assemblies, Nuclear magnetic resonance spectroscopy, pH, Silk fibroin, Small angle neutron scattering, Sophorolipid}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2017.09.045}, author = {Dubey, Parul and Kumar, Sugam and Ravindranathan, Sapna and Vasudevan, Sahana and Aswal, Vinod K. and Rajamohanan, Pattuparambil R. and Nisal, Anuya and Prabhune, Asmita} } @article {45498, title = {Prediction of coal ash fusion temperatures using computational intelligence based models}, journal = {International Journal of Coal Science and Technology}, volume = {4}, year = {2018}, month = {DEC}, pages = {486-507}, type = {Article}, abstract = {

In the coal-based combustion and gasification processes, the mineral matter contained in the coal (predominantly oxides), is left as an incombustible residue, termed ash. Commonly, ash deposits are formed on the heat absorbing surfaces of the exposed equipment of the combustion/gasification processes. These deposits lead to the occurrence of slagging or fouling and, consequently, reduced process efficiency. The ash fusion temperatures (AFTs) signify the temperature range over which the ash deposits are formed on the heat absorbing surfaces of the process equipment. Thus, for designing and operating the coal-based processes, it is important to have mathematical models predicting accurately the four types of AFTs namely initial deformation temperature, softening temperature, hemispherical temperature, and flow temperature. Several linear/nonlinear models with varying prediction accuracies and complexities are available for the AFT prediction. Their principal drawback is their applicability to the coals originating from a limited number of geographical regions. Accordingly, this study presents computational intelligence (CI) based nonlinear models to predict the four AFTs using the oxide composition of the coal ash as the model input. The CI methods used in the modeling are genetic programming (GP), artificial neural networks, and support vector regression. The notable features of this study are that the models with a better AFT prediction and generalization performance, a wider application potential, and reduced complexity, have been developed. Among the CI-based models, GP and MLP based models have yielded overall improved performance in predicting all four AFTs.

}, issn = {20958293}, doi = {10.1007/s40789-018-0213-6}, author = {Tambe, S.S. and Naniwadekar, M. and Tiwary, S. and Mukherjee, A. and Das, T. B.} } @article {45409, title = { Process intensification strategies for enhanced holocellulose solubilization: Beneficiation of pineapple peel waste for cleaner butanol production}, journal = {Journal of Cleaner Production}, volume = {199}, year = {2018}, month = {OCT}, pages = {937-947}, type = {Article}, abstract = {Biorefinery sector has become a serious dispute for cleaner and sustainable development in recent years. In the present study, pretreatment of pineapple peel waste was carried out in high pressure reactor using various pretreatment-enhancers. The type and concentration effect of each enhancer on hemicellulose solubilization was systematically investigated. The binary acid (phenol + sulfuric acid) at 180 degrees C was found to be superior amongst other studied enhancers, giving 81.17\% (w/v) hemicellulose solubilization in liquid-fraction under optimized conditions. Solid residue thus obtained was subjected to enzymatic hydrolysis that resulted into 24.50\% (w/v) cellulose breakdown. Treated solid residue was further characterized by scanning electron microscopy and fourier transform infrared spectroscopy to elucidate structural changes. The pooled fractions (acid treated and enzymatically hydrolyzed) were fermented using Clostridium acetobutylicum NRRL B 527 which resulted in butanol production of 5.18 g/L with yield of 0.13 g butanol/g sugar consumed. Therefore, pretreatment of pineapple peel waste evaluated in this study can be considered as milestone in utilization of low cost feedstock, for bioenergy production. (C) 2018 Elsevier Ltd. All rights reserved.}, issn = { 0959-6526}, doi = { 10.1016/j.jclepro.2018.07.205}, author = {Khedkar, Manisha A. and Nimbalkar, Pranhita R. and Kamble, Sanjay P. and Gaikwad, Shashank G. and Chavan, Prakash V. and Bankar, Sandip B.} } @article {44218, title = {Realizing high capacitance and rate capability in polyaniline by enhancing the electrochemical surface area through induction of superhydrophilicity}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {JAN}, pages = {676-686}, type = {Article}, abstract = {

Polyaniline (PANI) as a pseudocapacitive material has very high theoretical capacitance of 2000 F g(-1). However, its practical capacitance has been limited by low electrochemical surface area (ESA) and unfavorable wettability toward aqueous electrolytes. This work deals with a strategy wherein the high ESA of PANI has been achieved by the induction of superhydrophilicity together with the alignment of PANI exclusively on the surface of carbon fibers as a thin layer to form a hybrid assembly. Superhydrophilicity is induced by electrochemical functionalization of the Toray carbon paper, which further induces superhydrophilicity to the electrodeposited PANI layer on the paper, thereby ensuring a high electrode-electrolyte interface. The Toray paper is electrochemically functionalized by the anodization method, which generates a highly active electrochemical surface as well as greater wettability (superhydrophilic) of the carbon fibers. Because of the strong interaction of anilinium chloride with the hydrophilic carbon surface, PANI is polymerized exclusively over the surface of the fibers without any appreciable aggregation or agglomeration of the polymer. The PANI-Toray paper assembly in the solid-state prototype supercapacitor can provide a high gravimetric capacitance of 1335 F g(-1) as well as a high areal capacitance of 1.3 F cm(-2) at a current density of 10 A g(-1). The device also exhibits high rate capability, delivering 1217 F g(-1) at a current density of 50 A g(-1) and a high energy density of 30 W h kg(-1) at a power density of 2 kW kg(-1).

}, keywords = {electrochemical active sulfate area, electrochemical functionalization, electropolymerization, polyaniline, supercapacitor, superhydrophilic}, issn = {1944-8244}, doi = {10.1021/acsami.7b15534}, author = {Soni, Roby and Kashyap, Varchaswal and Nagaraju, Divya and Kurungot, Sreekumar} } @article {44190, title = {Rufinamide: crystal structure elucidation and solid state characterization}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {149}, year = {2018}, month = {FEB}, pages = {185-192}, type = {Article}, abstract = {

Rufinamide (R) is a triazole derivative approved for the management of partial seizures and seizures associated with Lennox-Gastaut Syndrome, in November 2007. Crystal structure, solid state characterization, drug-excipient compatibility and solubility play a pivotal role in formulation development. This work deals with the crystal structure elucidation of R by single crystal X-ray diffraction and solid state characterization by thermal, spectroscopic and crystallographic techniques. Drug- excipient compatibility was assessed by differential scanning calorimetry (DSC). New RP-HPLC method for quantification of R was developed with improved retention time. Solubility and dissolution of drug in different media was determined. Additionally, the flow behavior of the drug was evaluated by measuring Carr{\textquoteright}s index and Hausner{\textquoteright}s ratio, while the compressibility behavior was studied using Well{\textquoteright}s protocol. R crystallized from dimethylformamide (R-DMF) was utilized for single crystal analysis. The drug crystallized in triclinic crystal system with P-1 space group. Asymmetric unit cell consists of two molecules of R held by intermolecular hydrogen bond (connected by N-H center dot center dot center dot O, which forms the catemeric chain). Analytical outcomes from DSC, thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) revealed that the drug was present in pure crystalline form and was devoid of any polymorphic or pseudopolymorphic impurities. Influence of pH on the solubility and dissolution of R-DMF was found to be insignificant. The drug exhibited poor aqueous solubility, which was improved nearly 4.6 fold with the addition of 2\% sodium lauryl sulphate (SLS). The drug exhibits poor flow and elastic compression nature. Excipients such as poly ethylene glycol (PEG) 8000, SLS, lactose monohydrate, starch and Hydroxypropyl methylcellulose (HPMC) E15 were incompatible with R-DMF as identified by thermal analysis. It is envisaged that these information regarding solid state properties of R-DMF would aid in identifying a logical path for formulation development. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Compressibility, Dissolution media, DSC, HPLC method, solubility}, issn = {0731-7085}, doi = {10.1016/j.jpba.2017.11.003}, author = {Salunke, Nita and Thipparaboina, Rajesh and Chavan, Rahul B. and Lodagekar, Anurag and Mittapalli, Sudhir and Nangia, Ashwini and Shastri, Nalini R.} } @article {44390, title = {Salts and salt cocrystals of the antibacterial drug pefloxacin}, journal = {Crystal Growth \& Design}, volume = {18}, year = {2018}, month = {MAY}, pages = {2824-2835}, abstract = {Pefloxacin (PEF) is an amphoteric, antibacterial drug which exists as a neutral molecule in the crystal structure stabilized by C-H center dot center dot center dot O and C-H center dot center dot center dot F interactions. The design of multicomponent solids using crystal engineering was undertaken in a cocrystal/salt screen of PEF with generally recognized as safe (GRAS) dicarboxylic acids to improve the solubility and phase stability of the drug. Ten multicomponent forms, namely, five salts, two salt hydrates, and three salt cocrystals, were prepared by liquid-assisted grinding followed by crystallization. In some cases, salt and salt cocrystals were obtained concomitantly during solution evaporative crystallization. Single crystal X-ray diffraction showed that the structures are stabilized by N+-H center dot center dot center dot O-, O-H center dot center dot center dot O, C-H center dot center dot center dot O, C-H center dot center dot center dot F, and pi-pi stacking interactions. The bulk phase purity of multicomponent forms was characterized by powder X-ray diffraction, spectroscopy, and thermal techniques. The salt/salt cocrystal forms exhibit a faster dissolution rate and higher solubility compared to pure PEF in pH 1.2 (acidic, like gastric environment) and pH 7 phosphate buffer media (neutral, like intestinal passage). Specifically the PEF+-SA(-) salt (SA = succinic acid) showed remarkably high solubility, dissolution rate, and stability compared to the other multicomponent forms and PEF neutral form. The drug formulation compatible pefloxacin succinate is a promising soluble and stable PEF salt.}, doi = {10.1021/acs.cgd.7b01600}, author = {Gunnam, Anilkumar and Suresh, Kuthuru and Nangia, Ashwini} } @article {44639, title = {Selective oxidation of cyclohexane to cyclohexanone using chromium oxide supported mesoporous MCM-41 nanospheres: probing the nature of catalytically active chromium sites}, journal = {ChemCatChem}, volume = {10}, year = {2018}, month = {AUG}, pages = {3291-3298}, abstract = {

Highly dispersed chromium oxide supported mesoporous MCM-41 nanosphere catalysts have been synthesized using a simple wet impregnation method. This work is devoted to a systematic study to reveal the active Cr sites in chromium oxide supported MCM-41 nanosphere catalysts for the selective oxidation of cyclohexane to cyclohexanone. To probe the nature of the active species, we synthesized 0.5-10wt\% Cr loaded catalysts and characterized them by using XRD, UV/Vis spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, extended X-ray absorption fine structure analysis, X-ray absorption near edge structure analysis, N-2 sorption analysis, FTIR spectroscopy, (SiNMR)-Si-29 spectroscopy, SEM, and TEM. The liquid-phase oxidation of cyclohexane to cyclohexanone (99\% selectivity) was performed under mild reaction conditions, and the results reveal clearly that the 5wt\% Cr loaded catalyst was optimum for the reaction. The initial composition of isolated Cr3+ species in the catalyst is the major factor that influences the enhanced activity for cyclohexane oxidation.

}, keywords = {chromium, heterogeneous catalysis, Nanostructures, Oxidation, supported catalysts}, issn = {1867-3880}, doi = {10.1002/cctc.201800309}, author = {Betsy, Kurisingal J. and Nayak, Chandrani and Lazar, Anish and Krishnan, Athira and Bhattacharyya, Dibyendu and Jha, Shambhu N. and Vinod, Chathakudath P.} } @article {44368, title = {Self-assembly of Cis-configured squaraine dyes at the TiO2-dye interface: far-red active dyes for dye-sensitized solar cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {MAY}, pages = {16541-16551}, type = {Article}, abstract = {To synergize both steric and electronic factors in designing the dyes for dye-sensitized solar cells, a series of cis-configured unsymmetrical squaraine dyes P11-P15 with suitably functionalized alkyl groups and squaric acid units containing the electron-withdrawing groups were synthesized, respectively. These dyes capture the importance of (i) the effect and position of branched alkyl groups, (ii) mono- and di-anchoring groups containing dyes, and (iii) further appending the alkyl groups through the cyanoester vinyl unit on the central squaric acid units of DAD-based cis-configured squaraine dyes. All the above factors govern the controlled self-assembly of the dyes on the TiO2 surface which helps to broaden the absorption profile of the dyes with an increased energy-harvesting process. With respect to the position of the branched alkyl groups, dye P11 with the sp(3)-C and N-alkyl groups away from the TiO2 surface showed a better device efficiency of 5.98\% (J(sc) of 14.46 mA cm(-2), V-oc of 0.576 V, and ff of 71.8\%) than its positional isomer P12 with 3.45\% (J(sc) of 8.78 mA cm(-2), V-oc of 0.554 V, and ff of 70.9\%). However, with respect to the dyes containing mono- and di-anchoring groups, P13 with two anchoring units exhibited a superior device performance of 7.58\% (J(sc) of 17.12 mA cm(-2), V-oc of 0.618 V, and ff of 71.7\%) in the presence of optically transparent co-adsorbent CDCA (3 alpha,7 alpha-dihydroxy-5 beta-cholanic acid) than dyes P11 and P12.}, doi = {10.1021/acsami.8b03106}, author = {Punitharasu, Vellimalai and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {44380, title = {Silk fibroin micro-particle scaffolds with superior compression modulus and slow bioresorption for effective bone regeneration}, journal = {Scientific Reports}, volume = {8}, year = {2018}, month = {MAY}, pages = {Article Number: 7235}, abstract = {Silk fibroin (SF), a natural polymer produced by Bombyx mori silkworms, has been extensively explored to prepare porous scaffolds for tissue engineering applications. Here, we demonstrate, a scaffold made of SF, which exhibits compression modulus comparable to natural cancellous bone while retaining the appropriate porosities and interconnected pore architecture. The scaffolds also exhibit high resistance to in-vitro proteolytic degradation due to the dominant beta sheet conformation of the SF protein. Additionally, the scaffolds are prepared using a simple method of microparticle aggregation. We also demonstrate, for the first time, a method to prepare SF micro-particles using a Hexafluoroisopropanol-Methanol solvent-coagulant combination. SF microparticles obtained using this method are monodisperse, spherical, non-porous and extremely crystalline. These micro-particles have been further aggregated together to form a 3D scaffold. The aggregation is achieved by random packing of these microparticles and fusing them together using a dilute SF solution. Preliminary in-vitro cell culture and in-vivo implantation studies demonstrate that the scaffolds are biocompatible and they exhibit the appropriate early markers, making them promising candidates for bone regeneration.}, doi = {10.1038/s41598-018-25643-x}, author = {Nisal, Anuya and Sayyad, Raeesa and Dhavale, Prachi and Khude, Bhakti and Deshpande, Rucha and Mapare, Vidhyashri and Shukla, Swati and Venugopalan, Premnath} } @article {44568, title = {Spinel-type mixed oxides for stable and selective partial oxidation of benzyl alcohol}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {APR }, pages = {3751-3761}, type = {Article}, abstract = {

Benzaldehyde is an important chemical intermediate, which need to be prepared through an eco-friendly process. Manganese oxides are active as catalysts for its preparation through partial oxidation of benzyl alcohol. In this study, Cu, Co and Mn containing spinel based mixed oxides (CuxMn3-xO4) were prepared and tested for partial oxidation of benzyl alcohol to get benzaldehyde with high selectivity. The catalytic activity strongly depended on chemical composition, acid-base properties and oxygen uptake. The influence of chemical composition, reaction temperature, oxygen partial pressure and the weight hourly space velocity (WHSV) were investigated to optimize benzaldehyde yield and to stabilize the catalyst activity. A high benzaldehyde selectivity of 98\%, accompanied with benzyl alcohol conversion of 84.5\% was obtained over Cu0.25Mn2.75O4 catalyst at 300 {\textdegree}C. It was evident from temperature programmed desorption (TPD) of CO2 that this catalyst was found to have optimum basicity and high oxygen uptake, thus imparting high activity and stability. Activity and catalyst life could be attributed to appropriate acid-base properties. Supporting Information

}, issn = {23656549}, doi = {10.1002/slct.201800321}, author = {Gurrala, Lakshmiprasad and Nagpure, Atul S. and Gurav, Hanmant R. and Chilukur, Satyanarayana} } @article {44360, title = {Structural and magnetic properties of La2Ni1-xCoxMnO6 compounds}, journal = {Materials Research Bulletin}, volume = {102}, year = {2018}, month = {JUN}, pages = {248-256}, type = {Article}, abstract = {Single phase monoclinic La2Ni1-xMnO6 (x = 0.2, 0.4, 0.8) compounds, henceforth, referred as LNCxMO (x = 0.2, 0.4, 0.8) have been prepared by Sol-gel technique. The structural study and redox titration suggest that the samples are both La and O deficient. The generated atomic models using Rietveld refined structural parameters show octahedral distortion In the double perovskite structure. X-ray photoelectron spectroscopy (XPS) study has been used to determine the predominant valence states of Ni, Mn and Co ions. LNCxMO (x = 0.2, 0.4) are found to be Heisenberg ferromagnets whereas LNC0.8MO is a phase segregated system. In LNC0.4MO and LNO0.8MO, at temperatures above T-c, chi(-1)(T) curve shows the characteristics of Griffiths phase. The study of ac susceptibility and Isothermal remanent magnetization (IRM) discard the possibility of any glassy state at low temperatures. The antiphase boundaries (APBs), antisite disorders (ASDs) and oxygen vacancies play important roles in this system.}, doi = {10.1016/j.materresbull.2018.01.040}, author = {Pramanik, Debabrata and Mukherjee, S. and Dan, Shovan and Nandy, A. and Pradhan, S. K. and Dasgupta, Papri and Poddar, Asok and Mukherjee, Manabendra and Manjunath, B. and Joy, P. A.} } @article {44545, title = {Study the effect of impact angle on slurry erosion wear of four different ductile materials}, journal = {Materials Today: Proceedings}, volume = {5}, year = {2018}, month = {APR }, pages = { 7561-7570}, type = {Journal Article}, abstract = {

The test rig fabricated for the present work has an ability to study the effect of orientation angle of erosion wear. The particles of Indian Standard sand (Quartz) selected as erodent for the present investigation because it is the most widely occurs in natural slurries. Experimental investigations on erosion behavior of ductile materials AISI SS304, AA 6063, Copper and Brass have been carried out using solid-water mixtures of the above erodent. The erosion wear due to solid-liquid mixture of IS Sand and tap water at different impact angles shows typical ductile erosion behavior for the selected materials. The maximum erosion is observed at 22.5{\textdegree} angle for AISI SS 304, 45o for AA 6063, 22.5o for Copper and 30o for Brass. The minimum erosion is observed at 90o orientation angle for all the materials. The eroded specimens were examined under the Scanning Electron Microscope (SEM) at minimum and maximum wear orientation angles. The SEM micrographs of eroded specimens depict the mechanism of material removal.

}, keywords = {AA 6063, AISI SS304, brass, Copper, Quart, SEM, Slurry erosion}, issn = {22147853}, doi = {10.1016/j.matpr.2017.11.428}, author = {Nandre, Bhushan D. and Desale, Girish R.} } @article {44161, title = {Sucrose capped gold nanoparticles as a plasmonic chemical sensor based on non-covalent interactions: application for selective detection of vitamins B-1 and B-6 in brown and white rice food samples}, journal = {Food Chemistry}, volume = {250}, year = {2018}, month = {JUN}, pages = {14-21}, type = {Article}, abstract = {

We report simple and selective method for detection of vitamins B-1 and B-6 in brown and white rice samples using localized surface plasmon resonance (LSPR) of sucrose capped gold nanoparticles (AuNPs) as a chemical sensor colorimetrically. Here, detection is based on the color change of AuNPs from pink to blue followed by a red shift of LSPR absorption band in UV-vis region with the addition of vitamins B-1 and B-6 into the NPs solution. A good linear range was observed in the range of 25-1000 ngmL(-1) with detection limit of 8 ngmL(-1) for B-1 and 50-1000 ngmL(-1) with detection limit of 15 ngmL(-1) for vitamins B-6. The employment of AuNPs for detection of B-1 and B-6 vitamins in rice food samples showed remarkable abilities in terms of the simplicity, low cost, stability, reproducibility and sensitivity.

}, doi = {10.1016/j.foodchem.2018.01.002}, author = {Shrivas, Kamlesh and Nirmalkar, Nidhi and Thakur, Santosh Singh and Deb, Manas Kanti and Shinde, Sandip S. and Shankar, Ravi} } @article {44533, title = {Supramolecular complexes of poly(3-Hexylthiophene)-block (and random)-poly[3-(2-(6-carboxyhexyl)methyl)thiophene] copolymers with perylene bisimide}, journal = {Journal of Polymer Science Part A: Polymer Chemistry}, volume = {56}, year = {2018}, month = {MAY}, pages = {1574-1583}, type = {Journal Article}, abstract = {Block and random copolymers of poly(3-hexylthiophene) and poly[3-(2-(6-carboxyhexyl)methyl)thiophene] with side-chain carboxylic functionality ((P3HT-b-P3COOH) and (P3HT-r-P3COOH) were developed by Grignard Metathesis (GRIM) polymerization. The carboxylic functionality was introduced in the side chain via the oxazoline route. Both the block and random polythiophene copolymers were complexed with pyridine functionalized perylene bisimide to obtain supramolecular block and random polymer complexes. The complex formation in both systems was confirmed by 1H NMR, WXRD and SAXS studies. An expansion of d spacing upon complex formation was observed in both the block and random copolymer, which could be traced by WXRD. Hole and electron mobilities measured for the supramolecular complexes indicated values which were higher by an order of magnitude for the supramolecular block complex (μh ≈ 2.9 {\texttimes} 10-4 cm2/Vs; μe ≈ 3.1 {\texttimes} 10-6 cm2/Vs) as compared to the random (μh ≈ 1.4 {\texttimes} 10-5 cm2/Vs; μe ≈ 4.7 {\texttimes} 10-7 cm2/Vs) copolymer. These results are indicative of the higher degree of disorder prevailing in the films of random copolymer system compared to the block copolymer.}, keywords = {block and random polythiophene, perylene bisi-mide, Self-assembly}, issn = {0887624X}, doi = {10.1002/pola.29042}, author = {Shinde, Shekhar}, editor = {Vijayan, Raaghesh} } @article {45543, title = {Synthesis and antitumor activity evaluation of 2-aminothiazoles appended 5-methylisoxazoline and pyridine-piperazine hybrid molecules}, journal = {Letters in Organic Chemistry}, volume = {15}, year = {2018}, month = {NOV}, pages = {1070-1077}, type = {Article}, abstract = {A highly efficient and milder protocol for the syntheses of novel series of 2-aminothiazoles bearing 5-methylisoxazoline and pyridine-piperazine hybrid molecules has been developed. The target compounds 13a-e were screened for their in vitro cytotoxicity activity against various tumor cell lines including MCF-7 (human breast adenocarcinoma), HCT-116 (colorectal carcinoma), Jurkat (human T-cell leukemia) and THP-1 (human acute monocytic leukemia). The bioactive assay showed that the most of the new compounds exhibited promising results in comparison with the parental Sunitinib. The synthesized compounds could well be used in the future as lead anticancer drugs in drug development studies. The synthesized compounds were fully characterized by IR,1 H NMR,13 C NMR, elemental analysis and mass spectral data. }, doi = {10.2174/1570178615666180430122641}, author = {Suresh, G. and Nadh, R.V. and Srinivasu, N. and Yennity, D.} } @article {44197, title = {Synthesis and biological evaluation of new 2-aryl-4-((4-aryl-1H-1,2,3-triazol-1-yl)methyl)thiazole derivatives}, journal = {Research on Chemical Intermediates}, volume = {44}, year = {2018}, month = {FEB}, pages = {1247-1260}, type = {Article}, abstract = {

A series of 2-aryl-4-((4-aryl-1H-1,2,3-triazol-1-yl)methyl)thiazole derivatives (8a-p) have been synthesized. The structure of the newly synthesized compounds was determined by spectral analysis. The title compounds were screened for their preliminary antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB, ATCC 25177) and Mycobacterium bovis BCG (BCG, ATCC 35743). Further, the synthesized compounds were screened for antimicrobial activity against standard Gram-negative bacteria Escherichia coli (NCIM 2576) and Pseudomonas flurescence (NCIM 2059) and Gram-positive bacteria Staphylococcus aureus (NCIM 2602) and Bacillus subtilis (NCIM 2162). Among all the synthesized compounds, 8a-c, f-h, m exhibited good activity against dormant M. bovis BCG strain. Compounds 8h, j exhibited good activity against all tested bacterial strains. All active compounds were screened for cytotoxicity and found inactive. Their high potency and promising antimycobacterial activity suggest that these compounds could serve as good leads for further optimization and development.

}, keywords = {1, 2, 3-Triazole, antibacterial activity, Antitubercular activity, Thiazole}, issn = {0922-6168}, doi = {10.1007/s11164-017-3164-4}, author = {Shinde, Vikas and Mahulikar, Pramod and Mhaske, Pravin C. and Nawale, Laxman and Sarkar, Dhiman} } @article {44498, title = {Synthesis, biological evaluation, and molecular docking study of pyridine clubbed 1,3,4-oxadiazoles as potential antituberculars}, journal = {Synthetic Communications}, volume = {48}, year = {2018}, month = {JAN}, pages = {524-540}, type = {Journal Article}, abstract = {

A series of pyridine clubbed 1,3,4-oxadiazole derivatives were efficiently synthesized, characterized by standard spectral techniques and evaluated for their in vitro antitubercular activity against Mycobacterium tuberculosis (MTB) H37Ra and Mycobacterium bovis BCG in active and dormant state using an established methods. Compounds 5a, 5m, and 5t were identified as the most active compounds against MTB. Molecular docking was performed against MTB enoyl-ACP (CoA) reductase (FabI/ENR/InhA) enzyme to predict the binding modes and affinity. The theoretical predictions from molecular docking could establish a link between the observed biological activity and the binding affinity shedding light into specific bonded and non-bonded interactions influencing the activity. The active compounds were studied for cytotoxicity against three cell lines and were found to be non-cytotoxic. Specificity of these compounds was checked by screening them for their antibacterial activity against four bacterial strains.

}, keywords = {antibacterial activity, antituberculosis activity, cytotoxicity activity}, issn = {397911}, doi = {10.1080/00397911.2017.1410892}, author = {Desai, N. C.}, editor = {Trivedi, Amit} } @article {45379, title = { Systematic synthesis of a 6-component organic-salt alloy of naftopidil, and pentanary, quaternary and ternary multicomponent crystals}, journal = {IUCrJ}, volume = {5}, year = {2018}, month = {NOV}, pages = {816-822}, type = {Article}, abstract = {The single-crystal X-ray structure of a 6-component organic-salt alloy (hexanary) of naftopidil (1) (an active pharmaceutical ingredient) with benzoic acid (2) and four different hydroxy-substituted benzoic acids, i.e. salicylic acid (3), 2,3-dihydroxybenzoic acid (4), 2,4-dihydroxybenzoic acid (5) and 2,6-dihydroxybenzoic acid (6), is reported. The hexanary assembly originates from the observation that the binary salts of naftopidil with the above acids are isostructural. In addition to the 6-component solid, we also describe five 5-component, ten 4-component, and ten 3-component organic-salt alloys of naftopidil (1) with carboxylic acids (2)-(6). These alloys were obtained from different combinations of the acids with the drug. The synthetic design of the multicomponent organic alloys is based on the rationale of geometrical factors (shape and size) and chemical interactions (hydrogen bonds). The common supramolecular synthon in all these crystal structures was the cyclic N+ - H center dot center dot center dot O- and O-H center dot center dot center dot O hydrogen-bonded motif of R-2(2) (9) graph set between the 2-hydroxyammonium group of naftopidil and the carboxylate anion. This ionic synthon is strong and robust, directing the isostructural assembly of naftopidil with up to five different carboxylic acids in the crystal structure together with the lower-level multicomponent adducts. Solution crystallization by slow evaporation provided the multicomponent organic salts and alloys which were characterized by a combination of single-crystal X-ray diffraction, powder X-ray diffraction, NMR and differential scanning calorimetry techniques.}, issn = { 2052-2525}, doi = { 10.1107/S2052252518014057}, author = {Dandela, Rambabu and Tothadi, Srinu and Marelli, Udaya Kiran and Nangia, Ashwini} } @article {44601, title = {THiCweed: fast, sensitive detection of sequence features by clustering big datasets}, journal = {Nucleic Acids Research}, volume = {46}, year = {2018}, month = {MAR}, pages = {e29}, abstract = {

We present THiCweed, a new approach to analyzing transcription factor binding data from high-throughput chromatin immunoprecipitation-sequencing (ChIP-seq) experiments. THiCweed clusters bound regions based on sequence similarity using a divisive hierarchical clustering approach based on sequence similarity within sliding windows, while exploring both strands. ThiCweed is specially geared toward data containing mixtures of motifs, which present a challenge to traditional motif-finders. Our implementation is significantly faster than standard motif-finding programs, able to process 30 000 peaks in 1-2 h, on a single CPU core of a desktop computer. On synthetic data containing mixtures of motifs it is as accurate or more accurate than all other tested programs. THiCweed performs best with large {\textquoteleft}window{\textquoteright} sizes (\>50 bp), much longer than typical binding sites (7-15 bp). On real data it successfully recovers literature motifs, but also uncovers complex sequence characteristics in flanking DNA, variant motifs and secondary motifs even when they occur in \<5\% of the input, all of which appear biologically relevant. We also find recurring sequence patterns across diverse ChIP-seq datasets, possibly related to chromatin architecture and looping. THiCweed thus goes beyond traditional motif finding to give new insights into genomic transcription factor-binding complexity.

}, issn = {0305-1048}, doi = {10.1093/narlgkx1251}, author = {Agrawal, Ankit and Sambare, Snehal V. and Narlikar, Leelavati and Siddharthan, Rahul} } @article {45420, title = { Tracing the biosynthetic origin of limonoids and their functional groups through stable isotope labeling and inhibition in neem tree (Azadirachta indica) cell suspension}, journal = {BMC Plant Biology}, volume = {18}, year = {2018}, month = {OCT}, type = {Article}, abstract = {Background Neem tree serves as a cornucopia for triterpenoids called limonoids that are of profound interest to humans due to their diverse biological activities. However, the biosynthetic pathway that plant employs for the production of limonoids remains unexplored for this wonder tree. Results Herein, we report the tracing of limonoid biosynthetic pathway through feeding experiments using C-13 isotopologues of glucose in neem cell suspension. Growth and development specific limonoid spectrum of neem seedling and time dependent limonoid biosynthetic characteristics of cell lines were established. Further to understand the role of mevalonic acid (MVA) and methylerythritol phosphate (MEP) pathways in limonoid biosynthesis, Ultra Performance Liquid Chromatography (UPLC)- tandem mass spectrometry based structure-fragment relationship developed for limonoids and their isotopologues have been utilized. Analyses of labeled limonoid extract lead to the identification of signature isoprenoid units involved in azadirachtin and other limonoid biosynthesis, which are found to be formed through mevalonate pathway. This was further confirmed by treatment of cell suspension with mevinolin, a specific inhibitor for MVA pathway, which resulted in drastic decrease in limonoid levels whereas their biosynthesis was unaffected with fosmidomycin mediated plastidial methylerythritol 4-phosphate (MEP) pathway inhibition. This was also conspicuous, as the expression level of genes encoding for the rate-limiting enzyme of MVA pathway, 3-hydroxy-3-methyl-glutaryl-coenzyme A reductase (HMGR) was comparatively higher to that of deoxyxylulose-phosphate synthase (DXS) of MEP pathway in different tissues and also in the in vitro grown cells. Thus, this study will give a comprehensive understanding of limonoid biosynthetic pathway with differential contribution of MVA and MEP pathways. Conclusions Limonoid biosynthesis of neem tree and cell lines have been unraveled through comparative quantification of limonoids with that of neem tree and through C-13 limonoid isotopologues analysis. The undifferentiated cell lines of neem suspension produced a spectrum of C-seco limonoids, similar to parental tissue, kernel. Azadirachtin, a C-seco limonoid is produced in young tender leaves of plant whereas in the hard mature leaves of tree, ring intact limonoid nimocinol accumulates in high level. Furthermore, mevalonate pathway exclusively contributes for isoprene units of limonoids as evidenced through stable isotope labeling and no complementation of MEP pathway was observed with mevalonate pathway dysfunction, using chemical inhibitors.}, isbn = {1471-2229}, doi = {10.1186/s12870-018-1447-6}, author = {Aarthy, Thiagarayaselvam and Mulani, Fayaj A. and Pandreka, Avinash and Kumar, Ashish and Nandikol, Sharvani S. and Haldar, Saikat and Thulasiram, Hirekodathakallu V.} } @article {45456, title = {Ultrasound assisted synthesis of 4-(Benzyloxy)-N-(3-chloro-2-(substitutedphenyl)-4-oxoazetidin-1-yl) benzamide as challenging anti-tubercular scaffold}, journal = { Molecules}, volume = {23}, year = {2018}, month = {AUG}, pages = {Article No: 1945}, type = {Article}, abstract = {

A series of ten novel derivatives of 4-(benzyloxy)-N-(3-chloro-2-(substituted phenyl)-4-oxoazetidin-1-yl) benzamide 6a-j were synthesized in good yield from the key compound 4-(benzyloxy)-N-(substituted benzylidene) benzo hydrazide, called Schiff {\textquoteleft}s bases 5a-j, by Staudinger reaction ([2 + 2] ketene-imine cycloaddition reaction) with chloro acetyl chloride in the presence of catalyst tri ethylamine and solvent dimethyl formamide (DMF), by using ultra-sonication as one of the green chemistry tools. All the synthesised compounds were evaluated for in vitro anti-tubercular activity against Mycobacterium tuberculosis (MTB) and most of them showed promising activity with an IC50 value of less than 1 mu g/mL. To establish the safety, all the synthesized compounds were further tested for cytotoxicity against the human cancer cell line HeLa and all 6a-j compounds were found to be non-cytotoxic in nature. The molecular docking study was carried out with essential enzyme InhA (FabI/ENR) of Mycobacterium responsible for cell wall synthesis which suggests that 6a and 6e are the most active derivatives of the series. The theoretical evaluation of cell permeability based on Lipinski{\textquoteright}s rule of five has helped to rationalize the biological results and hence the synthesized azetidinone derivatives 6a-j were also analyzed for physicochemical evaluation that is, absorption, distribution, metabolism, excretion, and toxicity (ADMET) properties and the results showed that all the derivatives could comply with essential features required for a potential lead in the anti-tubercular drug discovery process.

}, keywords = {ADMET study, anti-tubercular screening, azetidinone, cytotoxicity study, green chemistry, Molecular docking, ultra-sonication}, issn = {1420-3049}, doi = {10.3390/molecules23081945}, author = {Nimbalkar, Urja D. and Seijas, Julio A. and Borkute, Rachna and Damale, Manoj G. and Sangshetti, Jaiprakash N. and Sarkar, Dhiman and Nikalje, Anna Pratima G.} } @article {45429, title = {Understanding conformational dynamics of complex lipid mixtures relevant to biology}, journal = {Journal of membrane biology}, volume = {251}, year = {2018}, month = {DEC}, pages = {609-631}, type = {Article}, abstract = {This is a perspective article entitled "Frontiers in computational biophysics: understanding conformational dynamics of complex lipid mixtures relevant to biology" which is following a CECAM meeting with the same name.}, issn = {0022-2631 }, doi = {10.1007/s00232-018-0050-y}, author = {Friedman, Ran and Khalid, Syma and Aponte-Santamaria, Camilo and Arutyunova, Elena and Becker, Marlon and Boyd, Kevin J. and Christensen, Mikkel and Coimbra, Joao T. S. and Concilio, Simona and Daday, Csaba and van Eerden, Floris J. and Fernandes, Pedro A. and Graeter, Frauke and Hakobyan, Davit and Heuer, Andreas and Karathanou, Konstantina and Keller, Fabian and Lemieux, M. Joanne and Marrink, Siewert J. and May, Eric R. and Mazumdar, Antara and Naftalin, Richard and Pickholz, Monica and Piotto, Stefano and Pohl, Peter and Quinn, Peter and Ramos, Maria J. and Schiott, Birgit and Sengupta, Durba and Sessa, Lucia and Vanni, Stefano and Zeppelin, Talia and Zoni, Valeria and Bondar, Ana-Nicoleta and Domene, Carmen} } @article {44425, title = {Water mediated proton conductance in a hydrogen-bonded Ni(II)-bipyridine-glycoluril chloride self-assembled framework}, journal = {CrystEngComm}, volume = {20}, year = {2018}, month = {JAN}, pages = {1094-1100}, type = {Journal Article}, abstract = {

Proton conducting properties have been investigated in a new Ni(II)-based hydrogen-bonded porous framework synthesized using a urea-fused bipyridine-glycoluril (BPG) tecton. This hydrogen-bonded self-assembled structure encapsulates water molecules in the channels with hydrogen-bonding networks which exhibits a significant temperature dependent proton conductance of 1.5 \× 10\−4\ S cm\−1\ at 95 \°C and 95\% RH with a low activation energy (Ea) of 0.54 eV, implying a Grotthuss proton hopping mechanism mediated by hydrogen-bonded water molecules in the channels. In addition, this framework exhibited a very high water uptake under humid conditions. A continuous array of water molecules and chloride ions embedded in the highly hydrophilic porous channels of the hydrogen-bonded framework acts as the proton conducting medium.

}, issn = {14668033}, doi = {10.1039/c7ce01814b}, author = {Tayade, Sakharam B. and Bhat, Satish S. and Illathvalappil, Rajith and Dhavale, Vishal M. and Kawade,Vitthal A. and Kumbhar, Avinash S. and Kurungot, Sreekumar and N{\"a}ther, Christian} } @article {45449, title = {Water-in-acid gel polymer electrolyte realized through a phosphoric acid-enriched polyelectrolyte matrix toward solid-state supercapacitors}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {6}, year = {2018}, month = {OCT}, pages = {12630-12640}, type = {Article}, abstract = {A new concept of water-in-acid gel polymer electrolytes (GPEs) is introduced. The simple and scalable UV-light-assisted synthesis of a copolymer matrix possessing polyelectrolyte behavior, followed by swelling in minimally diluted H3PO4 (15.1 M/88 wt \% aqueous solution), effects formation of a high proton-conducting, self-standing, and mechanically stable polyelectrolyte GPE (PGPE). Retention of high mechanical stability despite the presence of a large amount of liquid species makes it a promising candidate for replacing conventional GPEs. The high proton conductivity (9.8 X 10(-2) S cm(-1)) of the PGPE at an ambient temperature of 303 K is attributed to the high concentration of the conducting species present in the polymer matrix. The PGPE-based polyaniline (PANI) supercapacitor device (PANI-1) with a mass loading of 1 mg cm(-2) exhibits a high specific gravimetric capacitance of 385 F g(-1) at a current density of 0.25 mA cm(-2). At the same current density, the PANI-5 device retains high gravimetric and areal capacitance values of 258 F g(-1) and 1288 mF cm(-2), respectively. The low equivalent series resistance value of 0.78 Omega (for the PANI-5 device) further proves the excellent electrode-electrolyte interface formed by the water-in-acid GPE. A 100\% capacitance retention even after 9000 continuous charge-discharge cycles strongly indicates the feasibility of adopting water-in-acid GPEs in future supercapacitors.}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.8b01175}, author = {Vijayakumar, Vidyanand and Ghosh, Meena and Torris, Arun A. T. and Chandran, Nikhil M. K. and Nair, Sanoop B. and Badiger, Manohar V. and Kurungot, Sreekumar} } @article {45461, title = { Wet chemical synthesis of metal oxide nanoparticles: a review}, journal = {Crystengcomm}, volume = { 20 }, year = {2018}, month = {SEP}, pages = {5091-5107}, type = {Article}, abstract = {Metal oxide nanoparticles are an important class of nanomaterials that have found several applications in science and technology. Through wet chemical synthesis, it is possible to achieve selective surface structures, phases, shapes, and sizes of metal oxide nanoparticles, leading to a set of desired properties. Wet chemical synthesis routes allow fine tuning of the reaction conditions (temperature, concentration of substrate, additives or surfactants, pH, etc.) to afford the desired nanomaterials. In this review article, we highlight recent developments in the wet chemical synthesis of metal oxide nanoparticles to provide great control over the quality of the obtained nanomaterials. The review critically evaluates the different wet chemical methods for scalable production of metal oxide nanoparticles to satisfy the growing industrial demand for nanomaterials. Special attention is paid to continuous flow synthesis of metal oxide nanoparticles.}, doi = {10.1039/c8ce00487k}, author = {Nikam, A. V. and Bhagavatula L. V. Prasad and Kulkarni, A. A.} } @article {46050, title = {AgQDs employing black box synthetic strategy: photocatalytic and biological behavior}, journal = {Journal of Luminescence}, volume = {212}, year = {2019}, month = {AUG}, pages = {133-140}, type = {Article}, abstract = {

This investigation relates FRET, photocatalytic and a biological study of AgQDs which found to be dependent on particle size and capping agent used. Surface of AgQDs was one of the most important factors that govern its activity. AgQDs with BSA binding was systematically studied by fluorescence quenching and electrostatic interaction. AgQDs mainly interacted to site II of BSA, binding distance r evaluated according to the FRET theory and was 4.6 nm for AgQDs, which suggested transfer of energy (non-radioactive) between surface modified AgQDs and biological molecule BSA. The photocatalytic activity of AgQDs for the appreciable degradation of erythrosine dye using Ultraviolet-B light was investigated. AgQDs showed specific antibacterial activity against E. coli bacterial stain. Quantum dots displayed a pronounced and specific activity causing \> 50\% growth of COLO-205 and MCF-7 human cancer Cells at concentrations \< 10(-7 )M. Hence, present black box synthetic protocol of AgQDs could be life science application.

}, keywords = {AgQDs, Black box, COLO-205, Photocatalytic}, issn = {0022-2313}, doi = {10.1016/j.jlumin.2019.04.014}, author = {Pansare, Amol V. and Shedge, Amol A. and Chhatre, Shraddha Y. and Das, Debabrata and Murkute, Punam and Pansare, Shubham V. and Nagarkar, Amit A. and Patil, Vishwnath R. and Chakrabarti, S.} } @article {47176, title = {Aqueous-phase differentiation and speciation of Fe3+ and Fe2+ using water-stable photoluminescent lanthanide-based metal-organic framework}, journal = {ACS Applied Nano Materials}, volume = {2}, year = {2019}, month = {AUG}, pages = {5169-5178}, type = {Article}, abstract = {

Fe2+ is vital to O-2 transportation and photosynthesis regulated by oxidases and reductases. On the other hand, Fe3+ is detrimental due to its irreversible binding to O-2. Hence there is a need for selective identification of Fe3+ from aqueous systems in the presence of Fe2+. However, given their close chemical nature, it is not straightforward to differentiate them. Fe2+ and Fe3+ are typically sensed and differentiated using magnetic measurements, Mossbauer, X-ray absorption spectroscopy, or EXAFS, which are complex and equipment intensive techniques. In comparison, the fluorescence technique is advantageous in terms of time and accessibility. Although readily available lanthanide salts exhibit fluorescence, they are weak, and to serve as an optical probe, their luminescence has to be enhanced via ligand design. Hence we have designed a chromophoric ligand that can covalently bind to lanthanides and enhance its fluorescence intensity, and it binds selectively to Fe3+ through its nitrogen centers. It detects Fe3+ from low concentration (similar to 100 mu M) aqueous solutions, with fast response time (\<1 min) and with a detection limit of 3.6 ppm. Importantly, the Fe3+ adsorbed MOF can be readily reactivated for the next cycle by merely washing with an aqueous ascorbic acid solution and can be used for multiple cycles without any appreciable loss in activity. This makes the Ln-MOF an environmentally benign, cost-effective, scalable, and recyclable probe.

}, keywords = {Fe3+ differentiation and speciation, flexible ligand, fluorescent MOF, iron speciation, Metal-organic framework, water sorption}, issn = {2574-0970}, doi = {10.1021/acsanm.9b01047}, author = {Maity, Rahul and Chakraborty, Debanjan and Nandi, Shyamapada and Yadav, Ankit Kumar and Mullangi, Dinesh and Vinod, C. P. and Vaidhyanathan, Ramanathan} } @article {47157, title = {Aromatic polycarbonates bearing pendant maleimide groups via functional monomer approach: synthesis and characterization}, journal = {Journal of Polymer Research}, volume = {27}, year = {2019}, month = {DEC}, pages = {8}, type = {Article}, abstract = {

A new bisphenol containing pendant maleimide group, viz., 4, 4{\textquoteright}-(5-maleimidopentane-2, 2-diyl) diphenol (BPA-MA), was synthesized starting from commercially available 4, 4{\textquoteright}-bis (4-hydroxyphenyl) pentanoic acid. Aromatic (co)polycarbonates possessing pendant maleimide groups were synthesized by solution polycondensation of BPA-MA or varying mixtures of BPA-MA and bisphenol-A (BPA) with triphosgene in dry dichloromethane in the presence of triethylamine as a base. Inherent viscosities and number average molecular weights of (co)polycarbonates were in the range 0.46-0.66 dL/g and 24,600-36,700, respectively, indicating the formation of reasonably high molecular weight polymers. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polycarbonates. (Co)polycarbonates were characterized using FT-IR, H-1 NMR, C-13 NMR spectroscopy, XRD, TGA and DSC analysis. The chemical modification of a representative copolycarbonate containing pendant maleimide groups was carried out quantitatively using thiol-maleimide Michael addition reaction with two thiol compounds, namely, 4-chlorothiophenol and 1-adamantanethiol. Additionally, it was demonstrated that copolycarbonate containing pendant maleimide groups could be used to form insoluble cross-linked gel by reaction with a multifunctional thiol cross-linker, namely, pentaerythritol tetrakis(3-mercaptopropionate).

}, keywords = {Aromatic polycarbonate, Cross-linking, maleimide group, Thiol-maleimide reaction, Triphosgene}, issn = {1022-9760}, doi = {10.1007/s10965-019-1909-z}, author = {Nagane, Samadhan S. and Kuhire, Sachin S. and Ichake, Amol B. and Rajamohanan, P. R. and Wadgaonkar, Prakash P.} } @article {46072, title = {Aromatic polyesters containing pendant azido groups: synthesis, characterization, chemical modification and thermal cross-linking}, journal = {European Polymer Journal}, volume = {116}, year = {2019}, month = {JUL}, pages = {180-189}, type = {Article}, abstract = {

A partially bio-based bisphenol containing pendant azido group viz., 4,4{\textquoteright}-(5-azidopentane-2,2-diyl) diphenol (AZBPA) was synthesized starting from 4,4{\textquoteright}-bis (4-hydroxyphenyl) pentanoic acid. AZBPA was reacted with isophthaloyl chloride (IPC), terephthaloyl chloride (TPC) and a mixture of IPC/TPC (50:50 mol\%) by phase transfer-catalyzed interfacial polycondensation route to obtain aromatic polyesters containing pendant azido groups. Copolyesters containing pendant azido groups were also synthesized by polycondensation of different molar proportions of AZBPA and commercially available 4,4{\textquoteright}-(1-phenylethane-1,1-diyl) diphenol (BPA-AP) with IPC. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.85-1.64 dL/g and 58,900-190,400, respectively, indicating the formation of reasonably high molecular weight polymers. Tough, transparent, and flexible films could be cast from chloroform solutions of these polyesters. X-Ray diffraction analysis showed that (co)polyesters were amorphous in nature. (Co)polyesters were characterized using FT-IR, H-1 NMR spectroscopy, XRD, TGA and DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using copper-catalyzed azide-alkyne cycloaddition (CuAAC) with two alkynes viz., phenyl acetylene (PA) and ethynyl-4-nitrobenzene (ENB). Additionally, (co)polyesters containing pendant azido groups were thermally cross-linked (170 degrees C/12 h) leading to the formation of network structures based on azide to nitrene decomposition and subsequent reactions on polyester backbone. The selected cross-linked polyesters were characterized by stress-strain measurements. The cross-linked polymers exhibited higher tensile strength and Young{\textquoteright}s modulus and lower \% elongation at break compared to corresponding pristine polyesters containing pendant azido groups.

}, keywords = {Aromatic polyester, Chemical modification, Click chemistry, Pendant azido group, Thermal cross-linking}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2019.04.019}, author = {Nagane, Samadhan S. and Verma, Savita and Tawade, V, Bhausaheb and Sane, Prakash S. and Dhanmane, Sushilkumar A. and Wadgaonkar, Prakash P.} } @article {46294, title = {Carbon derived from soft pyrolysis of a covalent organic framework as a support for small-sized RuO2 showing exceptionally low overpotential for oxygen evolution reaction}, journal = {ACS Omega}, volume = {4}, year = {2019}, month = {AUG}, pages = {13465-13473}, type = {Article}, abstract = {

Electrochemical water splitting is the most energy-efficient technique for producing hydrogen and oxygen, the two valuable gases. However, it is limited by the slow kinetics of the anodic oxygen evolution reaction (OER), which can be improved using catalysts. Covalent organic framework (COF)-derived porous carbon can serve as an excellent catalyst support. Here, we report high electrocatalytic activity of two composites, formed by supporting RuO2 on carbon derived from two COFs with closely related structures. These composites catalyze oxygen evolution from alkaline media with overpotentials as low as 210 and 217 mV at 10 mA/cm(2), respectively. The Tafel slopes of these catalysts (65 and 67 mV/dec) indicate fast kinetics compared to commercial RuO2. The observed activity is the highest among all RuO2-based heterogeneous OER catalysts-a touted benchmark OER catalyst. The high catalytic activity arises from the extremely small-sized (similar to 3-4 nm) RuO2 nanoparticles homogeneously dispersed in a micro-mesoporous (BET = 517 m(2)/g) COF-derived carbon. The porous graphenic carbon favors mass transfer, while its N-rich framework anchors the catalytic nanoparticles, making it highly stable and recyclable. Crucially, the soft pyrolysis of the COF enables the formation of porous carbon and simultaneous growth of small RuO2 particles without aggregation.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b01777}, author = {Chakraborty, Debanjan and Nandi, Shyamapada and Illathvalappil, Rajith and Mullangi, Dinesh and Maity, Rahul and Singh, Santosh K. and Haldar, Sattwick and Vinod, Chathakudath P. and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article {46268, title = {Co amorphous valsartan nifedipine system: Preparation, characterization, in vitro and in vivo evaluation}, journal = {European Journal of Pharmaceutical Sciences}, volume = {139}, year = {2019}, month = {NOV}, type = {Article}, abstract = {

Co amorphous systems are supersaturated drug delivery systems which offer a basic platform for delivery of multicomponent adducts (combination of more than one active pharmaceutical ingredient (API)) and/or as a fixed dose combination therapy, in addition to their potential to improve the apparent solubility, dissolution rate and ultimately bioavailability of poorly water soluble APIs. In the present work, a new drug-drug co amorphous system namely valsartan-nifedipine was prepared by quench cooling technique. Prepared co amorphous system was characterized for its solid state behavior with the help of Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Powder X Ray Diffractometry (PXRD). The optimized co amorphous system was stable for 1 month when exposed to accelerated stability condition (40 +/- 2 degrees C and 75 +/- 5\% RH). The improved stability of amorphous nifedipine in co amorphous system was attributed to improved miscibility and intra and intermolecular non-covalent interactions mainly due to presence of hydrogen bonding between valsartan and nifedipine which was studied by FTIR analysis. Co amorphous systems were evaluated by mainly in vitro dissolution and in vivo benefit. In vitro dissolution study showed nearly 5.66 folds and 1.61 folds improvement which was translated to 3.63 and 2.19 times enhancement in vivo C-max for nifedipine and valsartan respectively.

}, doi = {10.1016/j.ejps.2019.105048}, author = {Lodagekar, Anurag and Chavan, Rahul B. and Mannava, M. K. Chaitanya and Yadav, Balvant and Chella, Naveen and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {45530, title = {Cocrystals, salts, and supramolecular gels of nonsteroidal anti inflammatory drug niflumic acid}, journal = {Crystal Growth \& Design}, volume = {19}, year = {2019}, month = {JAN}, pages = {219-230}, type = {Article}, abstract = {

Niflumic acid (NFA) is a nonsteroidal anti-inflammatory drug (NSAID) classified under the BCS (Biopharmaceutical Classification System) Class II category of poor aqueous solubility and high permeability. In an attempt to improve the physicochemical properties of NFA, particularly solubility and dissolution rate by cocrystallization and salt formation, cocrystals of NFA were prepared with caprolactam (CPR, 1:1) and 2-hydroxy pyridine (2HP, 1:1) as well as salts with piperazine (PIP, 1:0.5), benzenesulfonic acid (BSA, 1:1), benzyl amine (BZA, 1:1 and 2:2), and tyramine (TYA, 1:1). The new solid forms were characterized by powder X-ray diffraction, infrared spectroscopy, and differential scanning calorimetry and confirmed by single crystal X-ray diffraction. In the cocrystals NFA CPR and NFA-2HP, the cyclic amide of the coformer forms a dimer synthon through N-H center dot center dot center dot O hydrogen bonds and such dimers extend through O-H center dot center dot center dot O hydrogen bonds. In piperazine, benzyl amine, and tyramine salts, proton transfer occurs from the NFA to the basic nitrogen of the coformer, and in NFA BSA salt, the proton is transferred from benzenesulfonic acid to the pyridine nitrogen of NFA. In addition to the above salts and cocrystals, supramolecular gels of NFA-PIP and NFA-BZA salts are reported, which were obtained from nitrobenzene, methyl salicylate, menthol, and mesitylene solvents. These gels were studied by rheology. Solubility and dissolution rate of the novel solid forms (NFA CPR, NFA PIP, NFA BSA, and NFA TYA) in 20\% EtOH water showed the best behavior for NFA-TYA salt with improvement of 42-and 54-times in solubility and dissolution rate compared to the reference drug. The remaining solids such as NFA-PIP, NFA-BSA salts, and NFA-CPR cocrystal exhibited improvement of 39-, 18-, 1.4-times in solubility and 7.8-, 10-, 2-times for dissolution rate.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.8b01298}, author = {Mittapalli, Sudhir and Mannava, M. K. Chaitanya and Sahoo, Rasmita and Nangia, Ashwini} } @article {47173, title = {Comparative study of a class of mean field theories of the glass transition}, journal = {Journal of Statistical Mechanics-Theory and Experiment}, volume = {2019}, year = {2019}, month = {AUG}, pages = {084008}, type = {Article}, abstract = {

In a recently developed microscopic mean field theory, we have shown that the dynamics of a system, when described only in terms of its pair structure, can predict the correct dynamical transition temperature. Further, the theory predicted the difference in dynamics of two systems (the Lennard-Jones and the Weeks-Chandler-Andersen) despite them having quite similar structures. This is in contrast to the Schweizer-Saltzman (SS) formalism which predicted the dynamics of these two systems to be similar. The two theories although similar in spirit have certain differences. Here we present a comparative study of these two formalism to find the origin of the difference in their predictive power. We show that not only the dynamics in the potential energy surface, as described by our earlier study, but also that in the free energy surface, like in the SS theory, can predict the correct dynamical transition temperature. Even an approximate one component version of our theory, similar to the system used in the SS theory, can predict the transition temperature reasonably well. Interestingly, we show here that despite the above mentioned shortcomings the SS theory can actually predict the correct transition temperatures. Thus microscopic mean field theories of this class which express dynamics in terms of the pair structure of the liquid while being unable to predict the actual dynamics of the system are successful in predicting the correct dynamical transition temperature.

}, keywords = {aging, etc), glasses (colloidal, glassy dynamics, mode coupling theory, Polymer, slow relaxation}, issn = {1742-5468}, doi = {10.1088/1742-5468/ab3115}, author = {Saha, Indranil and Nandi, Manoj Kumar and Dasgupta, Chandan and Bhattacharyya, Sarika Maitra} } @article {46418, title = {Comparative study of anomalous size dependence of charged and neutral solute diffusion in water}, journal = {Journal of Physical Chemistry B}, volume = {123}, year = {2019}, month = {DEC}, pages = {10275-10285}, type = {Article}, abstract = {

We present a comparative study of size dependence of diffusion for charged and neutral solutes in water. Although both show nonmonotonicity of the size dependence of diffusion, their nature and origin are quite different. For neutral solutes, the peak position and the value of diffusion at the maximum are both independent of the solute water interaction. Interestingly, for charged solutes, with an increase in solute water interaction strength, the peak position shifts to lower solute sizes and with an increase in charge, it shifts to higher solute sizes. The diffusion value at the peak reduces with an increase in both solute water interaction and solute charge. We show that all these features observed for charged solutes can be understood in terms of the interplay between ionic and nonionic interactions which is definitely absent for neutral solutes. Some of the earlier studies addressing the nonmonotonicity in diffusion did suggest the interplay between the two interactions to be the cause. However, this is the first time we show that such an interplay gives rise to the nonmonotonicity in the potential energy which is a prerequisite for obtaining the nonmonotonicity in the diffusion. Such nonmonotonicity in the potential energy is absent for neutral solutes.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.9b08023}, author = {Acharya, Sayantan and Nandi, Ujjwal K. and Bhattacharyya, Sarika Maitra} } @article {46445, title = {Core-composite mediated separation of diverse nanoparticles to purity}, journal = {Soft Matter}, volume = {15}, year = {2019}, month = {OCT}, pages = {7787-7794}, type = {Article}, abstract = {

A generalized method for sorting nanoparticles based on their cores does not exist; it is an immediate necessity, and an approach incorporating cost-effectiveness and biocompatibility is in demand. Therefore, an efficient method for the separation of various mixed core-compositions or dissimilar metallic nanoparticles to their pure forms at the nano-bio interface was developed. Various simple core-combinations of monodispersed nanoparticles with dual cores, including silver plus gold, iron oxide plus gold and platinum plus gold, to the complex three-set core-combinations of platinum plus gold plus silver and platinum plus iron plus gold were sorted using step-gradient centrifugation in a sucrose suspension. Viscosity mediated differential terminal velocities of the nanoparticles permitted diversified dragging at different gradients allowing separation. Stability, purity and properties of the nanoparticles during separation were evaluated based on visual confirmation and by employing advanced instrumentations. Moreover, theoretical studies validated our experimental observations, revealing the roles of various parameters, such as the viscosity of sucrose, the density of the particles and the velocity and duration of centrifugation, involved during the separation process. This remarkably rapid, cost-efficient and sustainable strategy can be adapted to separate other cores of nanoparticles for various biomedical research purposes, primarily to understand nanoparticle induced toxicity and particle fate and transformations in natural biotic environments.

}, issn = {1744-683X}, doi = {10.1039/c9sm01571j}, author = {Bhatt, Chandra S. and Nagaraj, Bharathkumar and Ghosh, Deepanjan and Ramasamy, Sureshkumar and Thapa, Ranjit and Marpu, Sreekar B. and Suresh, Anil K.} } @article {46413, title = {Covalent self-assembly in two dimensions: connecting covalent organic framework nanospheres into crystalline and porous thin films}, journal = {Journal of the American Chemical Society}, volume = {141}, year = {2019}, month = {DEC }, pages = {20379}, type = {Article}, chapter = {20371}, abstract = {

Insolubility of covalent organic frameworks (COFs) in organic solvents is one of the major obstacles for the potential application of these extended networks such as drug delivery, sensing, optoelectronics, and semiconductor device fabrication. The present work proposes a unique way to make uniform, solution-processable, crystalline, and porous COF nanospheres directly from the homogeneous solution of amine and aldehyde via spatial and temporal control of the nucleation and growth. This strategy of direct nucleation simultaneously showcases the caliber to tune the size of the COF nanospheres from 25 to 570 nm. We have also demonstrated the concept of mesoscale covalent self-assembly of those solution-processable COF nanospheres in the liquid-liquid interface (DCM-water bilayer) for the very first time, transmuting them into self-standing COF thin films with long-range ordered arrangements in two dimensions. The crystalline and porous (with TpAzo showing highest S-BET of 1932 m(2) g(-1)) free-standing COF thin films could be fabricated in a wide range of thicknesses from as low as 21 nm to as high as 630 nm. Both beta-ketoenamine (TpAzo, TpDPP) and imine (TpOMeAzo, TpOMeDPP) linked COF thin films have been synthesized via mesoscale covalent self-assembly of the solution-processable COF nanospheres illustrating the generality of this eloquent methodology. Further, the solution processability has been tested and utilized to cast COF thin films uniformly in the inner and outer surface of an alumina hollow fiber membrane. The COF thin film-alumina hollow fiber membrane composites have showcased promising selective molecular separation of He and O-2, He and CO2, and He and N-2.

}, issn = {0002-7863}, doi = {10.1021/jacs.9b10788}, author = {Sasmal, Himadri Sekhar and Halder, Arjun and Kunjattu, Shebeeb and Dey, Kaushik and Nadol, Athulya and Ajithkumar, Thalasseril G. and Bedadur, Prachiti Ravindra and Banerjee, Rahul} } @article {46161, title = {Crystal engineering: an outlook for the future}, journal = {Angewandte Chemie-International Edition}, volume = {58}, year = {2019}, month = {MAR}, pages = {4100-4107}, type = {Article}, abstract = {

Crystal Engineering has traditionally dealt with molecular crystals. It is the understanding of intermolecular interactions in the context of crystal packing and in the utilization of such understanding in the design of new solids with desired physical and chemical properties. We outline here five areas which come under the umbrella of Crystal Engineering and where we feel that a proper planning of research efforts could lead to higher dividends for science together with greater returns for humankind. We touch on themes and domains where science funding and translation efforts could be directed in the current climate of a society that increasingly expects applications and utility products from science and technology. The five topics are: 1)pharmaceutical solids; 2)industrial solid state reactions; 3)mechanical properties with practical applications; 4)MOFs and COFs framework solids; 5)new materials for solar energy harvesting and advanced polymers.

}, keywords = {crystal engineering, metal-organic frameworks, pharmaceutical solids, solar energy, solid-state reactions}, issn = {1433-7851}, doi = {10.1002/anie.201811313}, author = {Nangia, Ashwini K. and Desiraju, Gautam R.} } @article {46118, title = {Crystalline acylhydrazone photoswitches with multiple mechanical responses}, journal = {Crystal Growth \& Design}, volume = {19}, year = {2019}, month = {MAY}, pages = {3039-3044}, type = {Article}, abstract = {

The advancement of our understanding of stimuli responsive molecular crystals has led to the realization that they hold great yet unexplored potential as adaptive materials. Although molecular crystals that exhibit a single mechanical response to a single input stimulus are now abundant, crystals that are capable of response to multiple stimuli are rather scarce. Here we report two photoswitchable acylhydrazone derivatives, Ac-1 and Ac-2, which respond to light as well as to mechanical force. Upon application of localized mechanical stress, the anhydrous (Ac-1a) and monohydrate (Ac-1h) crystals of Ac-1 undergo plastic shearing deformation and bending, whereas monohydrate crystals of Ac-2 undergo elastic deformation. When they are exposed to UV light, crystals of Ac-1h and Ac-2 undergo photoinduced bending; on the other hand, crystals of Ac-1a and thicker crystals of Ac-2 exhibit photosalient effect (light-induced leaping). It is demonstrated that the synergistic action of multiple stimuli (UV light and force) elicits enhanced mechanical response, and this strategy could be employed in the future to increase the efficacy of single crystal actuators.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.8b01860}, author = {Gupta, Poonam and Panda, Tamas and Allu, Suryanarayana and Borah, Silpisikha and Baishya, Anamika and Gunnam, Anilkumar and Nangia, Ashwini and Naumov, Pance and Nath, Naba K.} } @article {46117, title = {Cu/Cu2O nanoparticles supported on a phenol-pyridyl COF as a heterogeneous catalyst for the synthesis of unsymmetrical diynes via glaser-hay coupling}, journal = {ACS Applied Materials \& Interfaces}, volume = {11}, year = {2019}, month = {MAY }, pages = {15670-15679}, type = {Article}, abstract = {

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers with a modular construct that favors fiinctionalization. COF pores can be used to grow nanoparticles (nPs) with dramatic size reduction, stabilize them as dispersions, and provide excellent nP access. Embedding substrate binding sites in COFs can generate host-guest synergy, leading to enhanced catalytic activity. In this report, Cu/Cu2O nPs (2-3 nm) are grown on a COF, which is built by linking a phenolic trialdehyde and a triamine through Schiff bonds. Their micropores restrict the nP to exceptionally small sizes (similar to 2-3 nm), and the pore walls decorated with strategically positioned hydrogen-bonding phenolic groups anchor the substrates via hydrogen-bonding, whereas the basic pyridyl sites serve as cationic species to stabilize the [CuclusterCl2](2-) type reactive intermediates. This composite catalyst shows high activity for Glaser-Hay heterocoupling reactions, an essential 1,3-diyne yielding reaction with widespread applicability in organic synthesis and material science. Despite their broad successes in homocoupled products, preparation of unsymmetrical 1,3-diynes is challenging due to poor selectivity. Here, our COF-based Cu catalyst shows elevated selectivity toward heterocoupling product(s) (Cu nP loading 0.0992 mol \%; turn over frequency: similar to 4S-50; turn over number: similar to 17S-190). The reversible redox activity at the Cu centers has been demonstrated by carrying out X-ray photoelectron spectroscopy on the frozen reactions, whereas the crucial interactions between the substrates and the binding sites in their optimized configurations have been modeled using density functional theory methods. This report emphasizes the utility of COFs in developing a heterogeneous catalyst for a truly challenging organic heterocoupling reaction.

}, keywords = {Copper nanoparticles, Covalent organic framework, Glaser-Hay heterocoupling, heterogeneous catalysis, unsymmetrical diynes}, issn = {1944-8244}, doi = {10.1021/acsami.9b02860}, author = {Chakraborty, Debanjan and Nandi, Shyamapada and Mullangi, Dinesh and Haldar, Sattwick and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article {46168, title = {Design and synthesis of 2-amino-thiophene-proline-conjugates and their anti-tubercular activity against mycobacterium tuberculosis H37Ra}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {MAR }, pages = {2851-2857}, type = {Article}, abstract = {

The emergence of extensively drug resistant tuberculosis (XDRTB) and multi-drug resistant tuberculosis (MDR-TB) has necessitated the development of new drugs with short chemotherapy treatment regime and cost effectiveness. To overcome these challenges, we are reporting the synthesis of a series of 2-amino-thiophene-proline-conjugates which show potent invino and ex-vivo anti-tubercular (anti-TB) activity against mycobacterium tuberculosis (rntb) H37Ra. The synthesis of these 2-amino-thiophene-proline-conjugates was carried out via solution phase peptide coupling reactions using methyl-2aminothiophene-3-carboxylate 8 as an intermediate obtained by modified gewald reaction. Intermediate 8 was coupled with different amino acids to obtain dipeptides 3, 4, 5, 6a and 7. Priliminary anti-TB assay data encoureaged us to synthesize modified proline derivatives 6b-6k via formation of a benzoxazinone intermediate 16. Most of these conjugates are active against mtb H37Ra in both active (A) and dormant (D) strains. They are also active against drug resistant mtb H37Ra strains. A trifluoroethyl ester analog, 6i was the most potent among the series [MIC 1 mu g/mL] along with 6f and 6g [MIC 2-6 mu g/mL]. Cytotoxicity studies suggested that, these compounds are less cytotoxic to human cell lines HeLa, MCF-7, HUVEC and hence possess high selectivity index (SI). Docking studies revealed that the binding mode of most active compounds 6i, 6g and 6f is in accordance with their bioactivity studies having docking score 8.969, 8.446 and 7.865, respectively. More- over, in sllico ADME properties suggest that all the compounds possess drug like properties.

}, keywords = {2-aminothiophene, Anti-tubercular, docking studies, Inh A gene, selectivity index}, issn = {2365-6549}, doi = {10.1002/slct.201803370}, author = {Baravkar, Sachin B. and Wagh, Mahendra A. and Nawale, Laxman U. and Choudhari, Amit S. and Bhansali, Sujit and Sarkar, Dhiman and Sanjayan, Gangadhar J.} } @article {45483, title = {Design and synthesis of aromatic polyesters bearing pendant clickable maleimide groups}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {57}, year = {2019}, month = {MAR }, pages = {630-640}, type = {Article}, abstract = {

A bisphenol bearing pendant maleimide group, namely, N-maleimidoethyl-3, 3-bis(4-hydroxyphenyl)-1-isobenzopyrrolidone (PPH-MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH-MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol \% mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH-MA and bisphenol A with IPC. Inherent viscosities and number-average molecular weights of aromatic (co)polyesters were in the range of 0.52-0.97 dL/g and 20,200-32,800 g/mol, respectively indicating formation of medium to reasonably high-molecular-weight polymers. C-13 NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10\% weight loss temperature of (co)polyesters was found in the range 470-484 degrees C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol-maleimide Michael addition reaction with two representative thiol compounds, namely, 4-chlorothiophenol and 1-adamantanethiol to yield post-modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. (c) 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 630-640

}, keywords = {crosslinking, maleimide group, modification, polyesters, thiol-maleimide}, issn = {0887-624X}, doi = {10.1002/pola.29303}, author = {Nagane, Samadhan S. and Kuhire, Sachin S. and Jadhav, Uday A. and Dhanmane, Sushilkumar A. and Wadgaonkar, Prakash P.} } @article {46125, title = {Design, synthesis and biological evaluation of (E)-5-styryl-1,2,4-oxadiazoles as anti-tubercular agents}, journal = {Bioorganic Chemistry}, volume = {86}, year = {2019}, month = {MAY}, pages = {507-512}, type = {Article}, abstract = {

Cinnamic acid and its derivatives are known for anti-tubercular activity. The present study reports the synthesis of cinnamic acid derivatives via bioisosteric replacement of terminal carboxylic acid with {\textquoteleft}{\textquoteleft}oxadiazole{\textquoteright}{\textquoteright}. A series of cinnamic acid derivatives (styryl oxadiazoles) were designed and synthesized in good yields by reaction of substituted cinnamic acids (2, 15a-15s) with amidoximes. The synthesized styryl oxadiazoles were evaluated in vitro for anti-tubercular activity against Mycobacterium tuberculosis (Mtb) H37Ra strain. The structure-activity relationship (SAR) study has identified several compounds with mixed anti-tubercular profiles. The compound 32 displayed potent anti-tubercular activity (IC50= 0.045 mu g/mL). Molecular docking studies on mycobacterial enoyl-ACP reductase enzyme corroborated well with the experimental findings providing a platform for structure based hit-to-lead development.

}, keywords = {1, 2, 4-Oxadiazole, Anti-tubercular, Bioisosteres, Cinnamic acid, Molecular docking}, issn = {0045-2068}, doi = {10.1016/j.bioorg.2019.01.054}, author = {Upare, Abhay Atmaram and Gadekar, Pradip K. and Sivaramakrishnan, H. and Naik, Nishigandha and Khedkar, Vijay M. and Sarkar, Dhiman and Choudhari, Amit and Roopan, S. Mohana} } @article {46144, title = {Development and evaluation of taxon-specific primers for the selected Caudovirales taxa}, journal = {Virus Research}, volume = {263}, year = {2019}, month = {APR }, pages = {184-188}, type = {Article}, abstract = {

The phage taxonomy is primarily based on the morphology derived from Transmission Electron Microscopic (TEM) studies. TEM based characterization is authentic and accepted by scientific community. However, TEM based identification is expensive and time consuming. After the phage isolation, before analysis TEM, a DNA based rapid method could be introduced. The DNA based method could dramatically reduce the number of samples analyzed by TEM and thereby increase the speed and reduce the cost of identification. In the present work, four environmental phage isolates were identified based on TEM studies and genome size. The identification of these four phages was validated using DNA based method. The taxon-specific DNA markers were identified through multiple sequence alignments. The primers were designed at conserved genes (DNA polymerase or integrase) of 4 different phage taxa viz. family Ackermannviridae, genus Jerseyvirus, genus T4virus, and genus P22virus. These primers were evaluated using both in vitro and in silico approach for the amplification of the target taxons. Majority of the primer sets were found to amplify member species of the targeted taxa in vitro. In In silico analysis, six primer sets intended for identification of family Ackermannviridae showed positive amplification of \>= 86.7\% classified species. Further, the primers targeting the genus Jerseyvirus and T4virus showed the amplification of 53.8\% and \>= 84.6\% species, respectively. The present work is a case study performed to explore the possibility of use of taxon-specific primers for identification and taxonomic studies of newly isolated phages to supplement the TEM.

}, keywords = {Bacteriophage, DNA markers, Pcr, Primers, Taxonomy, TEM}, issn = {0168-1702}, doi = {10.1016/j.virusres.2019.02.005}, author = {Newase, Sandeep K. and Gupta, Alka and Dastager, Syed G. and Kapadnis, Balu P. and Shashidhar, Ravindranath} } @article {46315, title = {Devising chemically robust and cationic Ni(II)-MOF with nitrogen-rich micropores for moisture-tolerant CO2 capture: highly regenerative and ultrafast colorimetric sensor for TNP and multiple Oxo-anions in water with theoretical revelation}, journal = {ACS Applied Materials \& Interfaces}, volume = {11}, year = {2019}, month = {OCT}, pages = {40134-40150}, type = {Article}, abstract = {

Metal-organic frameworks (MOFs) show distinctive superiority for carbon dioxide (CO2) capture and luminescent sensing of toxic pollutants over other materials where combination of both of these properties together with improvement of hydrolytic stability and pore functionality is critical to environmental remediation applications. The Ni(II) framework [Ni-2(mu 2OH)(azdc)(tpim)](NO3)center dot 6DMA center dot 6MeOH (CSMCRI-3) (tpim = 44{\textquoteright}4(2)-(1H-imidazole-245-triyl)tripyridine H(2)azdc = azobenzene-44{\textquoteright}-dicarboxylic acid DMA = dimethylacetamide CSMCRI = Central Salt \& Marine Chemicals Research Institute) encompassing cationic [Ni-2(mu(2)-OH)(CO2)(2)] SBUs is solvothermally synthesized from nitrogen-rich and highly fluorescent organic struts. The noninterpenetrated structure containing free nitrogen atom affixed microporous channels is stable in diverse organic solvents and weakly basic and acidic aqueous solutions. The activated MOF (3a) exhibits strong CO2-framework interaction and extremely selective CO2 adsorption over N-2 (292.5) and CH4 (11.7). Importantly water vapor exposure does not affect the surface area and/or multiple CO2 uptake-release cycles signifying potential of the porous structure for long-term use under humid conditions. Aqueous-phase sensing studies illustrate extremely specific and ultrafast detection of explosive 246-trinitrophenol (TNP) via remarkable fluorescence quenching (K-SV = 1.3 x 10 (5) M-1) with a 0.25 ppm limit of detection (LOD). Furthermore 3a serves as unique luminescent probe for highly discriminative and quick responsive detection of three noxious oxo-anions (Cr2O7 (2-) CrO4 (2-) MnO4-) in water via noteworthy turn-off responses and extreme low LODs (Cr2O7 (2-) 0.9; CrO4 (2-) 0.29; MnO4- 0.25 ppm). It is imperative to stress the outstanding reusability of the MOF toward multicyclic sensing of all four major water contaminants alongside visible colorimetric changes upon individual analyte detection. Mechanistic insights in light of the electron transfer route together with density functional theory calculations portray the influence of pore functionalization in framework-analyte interactions including alternation in energy levels where varying degrees of contribution of energy transfer explicitly authenticates high quenching of the material.

}, keywords = {chemically robust cationic MOF, DFT calculation, fast responsive detection, humid CO2 capture, TNP and oxo-anion sensing}, issn = {1944-8244}, doi = {10.1021/acsami.9b15179}, author = {Goswami, Ranadip and Seal, Nilanjan and Dash, Soumya Ranjan and Tyagi, Anshu and Neogi, Subhadip} } @article {45626, title = {Dicationic liquid mediated synthesis of tetrazoloquinolinyl methoxy phenyl 4-thiazolidinones and their antibacterial and antitubercular evaluation}, journal = {Synthetic Communications}, year = {2019}, month = {JAN}, type = {Article}, abstract = {In a search of new potentially active antitubercular agents here we have synthesized 3-substituted phenyl-2-(4-(tetrazolo[1,5-a]quinolin-4-ylmethoxy)phenyl)thiazolidin-4-ones (8a{\textendash}l) and evaluated their antibacterial, particularly antitubercular activity. These have been conveniently synthesized by performing one{\textendash}pot cyclocondensation of 4-(tetrazolo[1,5-a]quinolin-4-ylmethoxy)benzaldehyde, anilines and mercaptoacetic acid in dicationic ionic liquid, (3-methyl-1-[3-(methyl-1H-imidazolium-1-yl)propyl]-1H-imidazolium dibromide [C3(MIM)2{\textendash}2Br]) and obtained excellent yields of (8a{\textendash}l). 4-Thiazolidinones (8a{\textendash}l) were thoroughly characterized by their spectral analyses. These compounds have been screened for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra and Mycobacterium bovis (BCG). The compounds 8a, 8c, and 8e exhibited notable in vitro antitubercular activity compare to the reference, Rifampicin. Molecular docking study has also been performed to know the binding mode of these analogs in to the active site of DprE1 enzyme. The synthesized compounds were also evaluated for their in vitro antibacterial activity and amongst them compound 8k has shown moderate activity against both gram-negative and gram-positive bacterial strains.}, doi = {10.1080/00397911.2018.1564928}, author = {Deshmukh, A. R. and Dhumal, S. T. and Nawale, L. U. and Khedkar, V. M. and Sarkar, D. and Mane, R. A.} } @article {46342, title = {Differential dynamics underlying the Gln27Glu population variant of the beta(2)-adrenergic receptor}, journal = {Journal of Membrane Biology}, volume = {252}, year = {2019}, month = {OCT}, pages = {499-507}, type = {Article}, abstract = {

The beta (2)-adrenergic receptor (beta (2)AR) is a membrane-bound G-protein-coupled receptor and an important drug target for asthma. Clinical studies report that the population variant Gln27Glu is associated with a differential response to common asthma drugs, such as albuterol, isoproterenol and terbutaline. Interestingly, the 27th amino acid is positioned on the N-terminal region that is the most flexible and consequently the least studied part of the receptor. In this study, we probe the molecular origin of the differential drug binding by performing structural modeling and simulations of the wild-type (Gln) and variant (Glu) receptors followed by ensemble docking with the ligands, albuterol, isoproterenol and terbutaline. In line with clinical studies, the ligands were observed to interact preferentially with the Glu variant. Our results indicate that the Glu residue at the 27th position perturbs the network of electrostatic interactions that connects the N-terminal region to the binding site in the wild-type receptor. As a result, the Glu variant is observed to bind better to the three ligands tested in this study. Our study provides a structural basis to explain the variable drug response associated with the 27th position polymorphism in the beta (2)AR and is a starting step to identify genotype-specific therapeutics.

}, keywords = {beta(2)-Adrenergic receptor, G-protein-coupled receptor, GPCR, molecular dynamics, Pharmacogenetics, SNP}, issn = {0022-2631}, doi = {10.1007/s00232-019-00093-2}, author = {Bhosale, Sumedha and Nikte, V. Siddhanta and Sengupta, Durba and Joshi, Manali} } @article {46318, title = {Dimedone-based rigid organic scaffold for organizing symmetrical helical peptide chains.}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {OCT }, pages = {11518-11522}, type = {Article}, abstract = {

We describe herein design, synthesis and conformational investigations of polypeptides attached on a rigid dimedone template. Two identical peptide chains are attached on a single carbon containing dimedone as a scaffold. Dimedone assists in controlling the secondary interactions through strong intramolecular helical C-12 and C-15 membered bifurcated hydrogen bonding on both the peptide chains along with propagating the helical architecture of the peptide chains attached. There exists a C-6 hydrogen bonding for the single stranded peptides attached to dimedone. Extensive structural investigations involving single crystal X-ray diffraction, solution-state NMR and CD studies of oligopeptides have been undertaken.

}, keywords = {dimedone, Helical, hydrogen bonding, Peptides, template}, issn = {2365-6549}, doi = {10.1002/slct.201903087}, author = {Madica, Krishnaprasad and Lakshmi, Jerripothula K. and Madhu, Suresh and Nadimpally, Krishna Chaitanya and Gonnade, Rajesh and Jagadeesh, Bharatam and Sanjayan, Gangadhar J.} } @article {46145, title = {Dry reforming of methane in DBD plasma over Ni-based catalysts: influence of process conditions and support on performance and durability}, journal = {Energy Technology}, volume = {7}, year = {2019}, month = {APR}, pages = {1801008}, type = {Article}, abstract = {

The conversion of greenhouse gases, H-2 and CO selectivity, H-2/CO ratio, and carbon formation in the dry reforming reaction over Ni-supported ZSM-5, Al2O3, and TiO2 are tested under thermal, plasma, and plasma-thermal conditions. It is observed that the dielectric nature, specific surface area, and acid-base properties of the support influence the performance during the DRM reaction. Typical results indicate that the best activity and syngas yield are achieved with 15Ni/Al2O3 under plasma conditions, possibly due to the high dielectric constant and surface area of Al2O3 and nanosize of Ni. In the thermal condition, the highest conversion of 73\% and 68\% for CH4 and CO2, respectively, is achieved over 15Ni/ZSM-5 at 500 degrees C. Plasma-assisted thermal conditions provide the highest conversion due to the activation of reactants and their partial conversion in the plasma zone before entering into the catalytic zone. The plasma-assisted thermocatalytic conversions of CH4 and CO2 reach the best values of 76\% and 71\%, respectively, on 15Ni/ZSM-5. Under the same conditions, 68\% and 65\% conversion of CH4 and CO2, respectively, is achieved with 15Ni/Al2O3 where the selectivity for H-2 and CO is 45\% and 58\%, respectively.

}, keywords = {DBD plasma, Dry reforming, reaction conditions, supported catalysts, Syngas}, issn = {2194-4288}, doi = {10.1002/ente.201801008}, author = {Ray, Debjyoti and Nepak, Devadutta and Janampelli, Sagar and Goshal, Partha and Subrahmanyam, Ch} } @article {45493, title = {Effect and position of spiro-bipropylenedioxythiophene pi-spacer in donor-pi-spacer-acceptor dyes for dye-sensitized solar cell}, journal = {Dyes and Pigments}, volume = {161}, year = {2019}, month = {FEB}, pages = {313-323}, type = {Article}, abstract = {

Improper orientation and self-assembly of dyes on TiO2 surface are the main disadvantages at the dye-TiO2 interface that governs both charge injection and dye regeneration processes. In this report, a series of homo spiro-dimeric donor-pi-spacer-acceptor (D-pi-A) dyes based on bithiophene and terthiophene spacers with two-anchoring group containing dyes, TT1, T1T, TT1T were designed and synthesized by Pd-catalyzed successive Suzuki coupling followed by direct arylation reactions. The position of branching centre in TT1 and T1T was systematically varied, where the spiro unit was placed near and away from the anchoring carboxylic acid unit, respectively. The dimeric spiro-dye T1T showed device performance, which is 1.6 fold higher than its structural isomeric analogue TT1, of 3.9\% with a V-oc and J(sc) of 0.593 V and 9.09 mA/cm2, respectively, whereas for the isomeric analogue TT1 a device performance of 2.45\% (V-oc of 0.568 V and J(sc) of 6.25 mA/cm2) under simulated 1 Sun (100 mW/cm2) condition. The improved Voc for the dye T1T compared to TT1 dye was ascribed to the dipole moment exerted by the dyes on TiO2 surface. Further the PCE of 4.16\% (V-oc 0.589 V, J(sc) 9.79 mA/cm2 respectively) maximum was observed, when an extra thiophene unit was inserted in between the donor and pi-spacer in dye TT1T. The shifting the position of branching spiroBiProDOT pi-spacer makes an impact on the device performance by synergistically enhancing both Voc and Jsc.

}, keywords = {CDCA, D-pi-A Spiro dye, Dye aggregation, dye-sensitized solar cell, spiroBiProDOT spacer}, issn = {0143-7208}, doi = {10.1016/j.dyepig.2018.09.056}, author = {Sil, Manik Chandra and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {46126, title = {Effective polysulfide trapping polar interlayer for high rate Li-S batteries}, journal = {Journal of Materials Chemistry A}, volume = {7}, year = {2019}, month = {APR }, pages = {10067-10076}, type = {Article}, abstract = {

A microporous and polymeric C3N4 framework (CNF), when exploited as an interlayer and as a cathode host in Li-S batteries, demonstrates significantly improved electrochemical behavior with a special relevance to high rate applications up to 5C. A CNF obtained through a template free synthesis approach and activated with KOH is endowed with a high specific surface area of 1000 m(2) g(-1), a desirable nitrogen content (13\%) to ensure polarity and a microporous architecture, required to increase the accommodation capability of discharge products. The difference in electronegativity between C and N in CNFs combats in a major way the shuttling of lithium polysulfides (LIPSs) and ensures the realization of increased LIPS binding sites due to the presence of pyridinic nitrogen. Furthermore, a CNF driven change in the molecular configuration of adsorbed LIPSs leads to the uniform distribution and sequestration of discharge products. Similarly, micropores and the polymeric nature of CNFs facilitate the effective confinement of LIPSs and ably accommodate the volume changes (through the formation of Li2S upon discharge) respectively, especially when a microporous CNF interlayer is involved in the Li-S assembly. In particular, a CNF with 60 wt\% sulfur loading, otherwise represented as CNFS-60, when exploited as a cathode in combination with the deployment of a CNF interlayer exhibits appreciable capacity values of 500 and 400 mA h g(-1) at 3 and 5C respectively. Furthermore, the combination of the CNF interlayer and cathode demonstrates a steady state discharge capacity of 437 mA h g(-1) at 1C rate up to 300 cycles, without any significant capacity loss. The involvement of chemical interaction of the CNF with lithium polysulfides is demonstrated using density functional theory calculations. Hence, the effective trapping and the subsequent localization of migrating LIPSs arising from the strong chemical interaction of the CNF with soluble LIPSs and the advantages of high concentration of accessible pyridinic nitrogen sites to the LIPS adsorption in improving the electrochemical behavior of the Li-S system could be understood. This new CNF based interlayer provides a promising approach and ample scope for its implementation in futuristic Li-S batteries.

}, issn = {2050-7488}, doi = {10.1039/c9ta00233b}, author = {Karuppiah, Saravanan and Kalimuthu, Balakumar and Nazrulla, Mohammed Azeezulla and Krishnamurty, Sailaja and Nallathamby, Kalaiselvi} } @article {46180, title = {Efficient synergetic combination of H-USY and SnO2 for direct conversion of glucose into ethyl levulinate (Biofuel Additive)}, journal = {Energy \& Fuels}, volume = {33}, year = {2019}, month = {MAR}, pages = {2319-2327}, type = {Article}, abstract = {

Ethyl levulinate (EL), a biofuel additive for petroleum and biodiesel can also be used as a 100\% fuel to replace petroleum diesel with the existing diesel engine. The major problem to make the EL process economical is the lack of a proper conversion technology to convert C-6 sugars such as glucose with higher yield of EL as well as process which can tolerate higher glucose concentration to increase productivity. The present study highlighted the catalytic synthesis of EL from glucose over synergetic combination of zeolite H-USY and Lewis acidic catalysts such as Sn-beta, TiO2, ZrO2, and SnO2. Because of the strong Lewis acidic nature and the subsequent enhancement in the isomerization rate from glucosides to fructosides, the synergetic combination of H-USY with SnO2 showed higher EL yield than the combination with other Lewis acidic catalysts. So far, the highest EL yield of 81\% from glucose (50 g/L) at 180 degrees C in 3 h was achieved over the optimal combination of 95\% H-USY and 5\% SnO2 having strong/weak acidity and B/L ratios of 1.30 and 0.75, respectively. The study was further extended for establishing the proposed reaction mechanism without the formation of 5-hydroxymethyl furfural, levulinic acid, and formic acid which makes the overall process clean and green.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.8b04395}, author = {Heda, Jidnyasa and Niphadkar, Prashant and Bokade, Vijay} } @article {46446, title = {Electrocatalysis of oxygen reduction reaction on shape-controlled pt and pd nanoparticles-importance of surface cleanliness and reconstruction}, journal = {Frontiers in Chemistry}, volume = {7}, year = {2019}, month = {OCT}, pages = {648}, type = {Review}, abstract = {

Shape-controlled precious metal nanoparticles have attracted significant research interest in the recent past due to their fundamental and scientific importance. Because of their crystallographic-orientation-dependent properties, these metal nanoparticles have tremendous implications in electrocatalysis. This review aims to discuss the strategies for synthesis of shape-controlled platinum (Pt) and palladium (Pd) nanoparticles and procedures for the surfactant removal, without compromising their surface structural integrity. In particular, the electrocatalysis of oxygen reduction reaction (ORR) on shape-controlled nanoparticles (Pt and Pd) is discussed and the results are analyzed in the context of that reported with single crystal electrodes. Accepted theories on the stability of precious metal nanoparticle surfaces under electrochemical conditions are revisited. Dissolution, reconstruction, and comprehensive views on the factors that contribute to the loss of electrochemically active surface area (ESA) of nanoparticles leading to an inevitable decrease in ORR activity are presented. The contribution of adsorbed electrolyte anions, in-situ generated adsorbates and contaminants toward the ESA reduction are also discussed. Methods for the revival of activity of surfaces contaminated with adsorbed impurities without perturbing the surface structure and its implications to electrocatalysis are reviewed.

}, keywords = {Adsorption, Dissolution, oxygen reduction reaction, Palladium, platinum, reconstruction, shape-control, surface cleaning}, issn = {2296-2646}, doi = {10.3389/fchem.2019.00648}, author = {Devivaraprasad, Ruttala and Nalajala, Naresh and Bera, Bapi and Neergat, Manoj} } @article {46253, title = {Electron crystallography}, journal = {IUCRJ}, volume = {6}, year = {2019}, month = {SEP}, pages = {786-787}, type = {Article}, doi = {10.1107/S2052252519011497}, author = {Blake, Alexander J. and de Boissieu, Marc and Nangia, Ashwini} } @article {46350, title = {Electronic integration and thin film aspects of Au-Pd/rGO/TiO2 for improved solar hydrogen generation}, journal = {ACS Applied Materials \& Interfaces}, volume = {11}, year = {2019}, month = {SEP}, pages = {32869-32878}, type = {Article}, abstract = {

In the present work, we have synthesized noble bimetallic nanoparticles (Au-Pd NPs) on a carbon-based support and integrated with titania to obtain Au-Pd/C/TiO2 and Au-Pd/rGO/TiO2 nanocomposites using an ecofriendly hydrothermal method. Here, a 1:1 (w/w) Au-Pd bimetallic composition was dispersed on (a) high-surface-area (3000 m(2) g(-1)) activated carbon (Au-Pd/C), prepared from a locally available plant source (in Assam, India), and (b) reduced graphene oxide (rGO) (Au-Pd/rGO); subsequently, they were integrated with TiO2. The shift observed in Raman spectroscopy demonstrates the electronic integration of the bimetal with titania. The photocatalytic activity of the above materials for the hydrogen evolution reaction was studied under 1 sun conditions using methanol as a sacrificial agent in a powder form. The photocatalysts were also employed to prepare a thin film by the drop-casting method. Au-Pd/rGO/TiO2 exhibits 43 times higher hydrogen (H-2) yield in the thin film form (21.50 mmol h(-1) g(-1)) compared to the powder form (0.50 mmol h(-1) g(-1)). On the other hand, Au-Pd/C/TiO2 shows 13 times higher hydrogen (H-2) yield in the thin film form (6.42 mmol h(-1) g(-1)) compared to the powder form (0.48 mmol h(-1) g(-1)). While powder forms of both catalysts show comparable activity, the Au-Pd/rGO/TiO2 thin film shows 3.4 times higher activity than that of Au-Pd/C/TiO2. This can be ascribed to (a) an effective separation of photogenerated electron-hole pairs at the interface of Au-Pd/rGO/TiO2 and (b) the better field effect due to plasmon resonance of the bimetal in the thin film form. The catalytic influence of the carbon-based support is highly pronounced due to synergistic binding interaction of bimetallic nanoparticles. Further, a large amount of hydrogen evolution in the film form with both catalysts (Au-Pd/C/TiO2 and Au-Pd/rGO/TiO2) reiterates that charge utilization should be better compared to that in powder catalysts.

}, keywords = {bimetal, Photocatalysis, surface plasmon resonance, TiO2, water splitting}, issn = {1944-8244}, doi = {10.1021/acsami.9b07070}, author = {Tudu, Bijoy and Nalajala, Naresh and Reddy, Kasala P. and Saikia, Pranjal and Gopinath, Chinnakonda S.} } @article {46121, title = {Enhanced light harvesting and charge separation over wormhole mesoporous TiO2-X nanocrystallites towards efficient hydrogen generation}, journal = {Sustainable Energy \& Fuels}, volume = {3}, year = {2019}, month = {MAY }, pages = {1191-1200}, type = {Article}, abstract = {

Here meso-TiO2-X materials with combined visible light absorption, high surface area, an anatase-rutile heterojunction, and electrically interconnected nanocrystallites in a wormhole mesoporous framework are achieved. Meso-TiO2-X materials were prepared by solution combustion synthesis (SCS), followed by hydrogenation at higher temperatures. The materials are thoroughly characterised by various physicochemical techniques. A small band gap (2.8 eV), type IV-H-2 mesoporosity with a biphasic heterojunction, and small pore depths (10 nm) in a wormhole mesoporous framework are observed with 35AP. Photocatalytic water splitting for hydrogen production and photocurrent generation were carried out with meso-TiO2-X materials under simulated sunlight. A six-fold increase in activity under AM 1.5G irradiation was observed, which is attributed to the generated mid-gap states which lead to band gap reduction, improved optical absorption in the visible and infrared light region resulting in higher charge carrier density. The presence of a biphasic heterojunction between the (1 0 1) anatase and (1 1 0) rutile facets assists in effective charge separation. A low charge diffusional constraint associated with wormhole mesoporosity helps in facile charge transport to the surface for improved charge utilisation in redox reactions.

}, issn = {2398-4902}, doi = {10.1039/c8se00580j}, author = {Negi, Sanjay Singh} } @article {46213, title = {Enhancing epi-cedrol production in escherichia coli by fusion expression of farnesyl pyrophosphate synthase and epi-cedrol synthase}, journal = {Engineering in Life Science }, year = {2019}, month = {JULY}, type = {Article}, abstract = {

Terpene synthase catalyses acyclic diphosphate farnesyl diphosphate into desired sesquiterpenes. In this study, a fusion enzyme was constructed by linking Santalum album farnesyl pyrophosphate synthase (SaFPPS) individually with terpene synthase and Artemisia annua Epi-cedrol synthase (AaECS). The stop codon at the N-terminus of SaFPPS was removed and replaced by a short peptide (GSGGS) to introduce a linker between the two open reading frames. This fusion clone was expressed in Escherichia coli Rosseta DE3 cells. The fusion enzyme FPPS-ECS produced sesquiterpene 8-epi-cedrol from substrates isopentenyl pyrophosphate and dimethylallyl pyrophosphate through sequential reactions. The K-m values for FPPS-ECS for isopentyl diphosphate was 4.71 mu M. The fusion enzyme carried out the efficient conversion of IPP to epi-cedrol, in comparison to single enzymes SaFPPS and AaECS when combined together in enzyme assay over time. Further, the recombinant E. coli BL21 strain harbouring fusion plasmid successfully produced epi-cedrol in fermentation medium. The strain having fusion plasmid (pET32a-FPPS-ECS) produced 1.084 +/- 0.09 mg/L epi-cedrol, while the strain harbouring mixed plasmid (pRSETB-FPPS and pET28a-ECS) showed 1.002 +/- 0.07 mg/L titre in fermentation medium by overexpression and MEP pathway utilization. Structural analysis was done by I-TASSER server and docking was done by AutoDock Vina software, which suggested that secondary structure of the N- C terminal domain and their relative positions to functional domains of the fusion enzyme was greatly significant to the catalytic properties of the fusion enzymatic complex than individual enzymes.

}, doi = {10.1002/elsc.201900103}, author = {Navale, Govinda R and Sharma, Poojadevi and Said, Madhukar S and Ramkumar, Sudha and Dharne, Mahesh S and Thulasiram, H., V and Shinde, Sandip S} } @article {46147, title = {Epoxidation of karanja (Millettia pinnata) oil methyl esters in the presence of hydrogen peroxide over a simple niobium-containing catalyst}, journal = {Catalysts}, volume = {9}, year = {2019}, month = {APR}, pages = {344}, type = {Article}, abstract = {

The synthesis, characterization and catalytic performance of a conceptually simple, novel NbOx-SiO2 catalyst are here described. The niobium(V)-silica catalyst was prepared starting from cheap and viable reactants, by alkaline deposition of NH4Nb(C2O4)(2)H2O in the presence of fructose as a stabilizer and subsequent calcination. The NbOx-SiO2 solid (0.95 Nb wt.\%) was tested in the liquid-phase epoxidation with aqueous hydrogen peroxide of methyl oleate, as a model substrate. It was then tested in the epoxidation of a mixture of methyl esters (FAMEs) obtained by transesterification with methanol and purification of karanja oil, extracted from the autochthonous Indian variety of Millettia pinnata tree. The catalyst showed a promising performance in terms of methyl oleate conversion (up to 75\%) and selectivity to epoxide (up to 82\%). It was then tested on the FAME mixture from karanja oil, where interesting conversion values were attained (up to 70\%), although with lower selectivities and yields to the mixture of desired epoxidized FAMEs. The solid withstood four catalytic cycles overall, during which a non-negligible surface reorganization of the Nb(V) sites was observed. However, this restructuring did not negatively affect the performance of the catalysts in terms of conversion or selectivity.

}, keywords = {epoxidation, fatty acid methyl esters, heterogeneous catalysis, Hydrogen peroxide, karanja oil, mesoporous silica catalyst, Millettia pinnata, niobium catalysts}, issn = {2073-4344}, doi = {10.3390/catal9040344}, author = {Scotti, Nicola and Ravasio, Nicoletta and Evangelisti, Claudio and Psaro, Rinaldo and Penso, Michele and Niphadkar, Prashant S. and Bokade, Vijay V. and Guidotti, Matteo} } @article {46149, title = {Exploring the potential of Desmodium gangeticum (L.) DC. extract against spatial memory deficit in rats}, journal = {Pharmacognosy Magazine}, volume = {15}, year = {2019}, month = {APR}, pages = {78-83}, type = {Article}, abstract = {

Background: A few published reports demonstrated the neuroprotective effect of Desmodium gangeticum (L.) DC. in an acute model of dementia. Objective: The purpose of the present study was to evaluate the preclinical efficacy of D. gangeticum against chronic dementia when administered prophylactically. Materials and Methods: Chronic spatial memory deficit was induced in rats by aluminum chloride (AlCl3, 10 mg/kg, i.p.). Treatment with hydroalcoholic whole plant extract of D. gangeticum (DG extract) was initiated 2 week before AlCl3 challenge and continued till the 51(st) day after the challenge, orally at the dose of 400 mg/kg/day. The spatial memory was assessed by Morris water maze test. Hippocampal and frontal cortex acetyl cholinesterase (AChE) and oxidative stress were assessed in diseased rat brains. Results: Chronic administration of AlCl3 produced spatial memory deficit in rats. Memory impairment was manifested in rats as an increase in escape latency and D-quadrant latency whereas a decrease in total time spent in D-quadrant. These behavioral alterations were reversed significantly by the treatment with DG extract. In addition, DG extract significantly increased the island time, indicating memory improvement. DG extract corrected the declined AChE in frontal cortex and altered frontal cortex/hippocampus catalase activity. Phytochemical investigation of the DG extract revealed large content of saponins among the other phytochemicals such as tannins, alkaloids, and flavonoids. Conclusion: These results indicate the possible prophylactic potential of saponin-rich DG extract against chronic memory deficit in rats.

}, keywords = {Acetyl cholinesterase, Aluminum chloride, dementia, Desmodium gangeticum (L) DC, Oxidative stress}, issn = {0973-1296}, doi = {10.4103/pm.pm_501_18}, author = {Changdar, Nilanjan and Ganjhu, Rajesh Kumar and Rijal, Samita and Kumar, Ayush and Mallik, Shanchari Basu and Nampoothiri, Madhavan and Shenoy, Rekha R. and Sonawane, Kiran B. and Rao, Mallikarjuna C. and Mudgal, Jayesh} } @article {46132, title = {Fe(III)-Catalyzed diastereoselective friedel-crafts alkylation-hemiketalization-lactonization cascade for the synthesis of polycyclic bridged 2-chromanol lactones}, journal = {Organic Letters}, volume = {21}, year = {2019}, month = {APR }, pages = {2629-2633}, type = {Article}, abstract = {

An unprecedented Fe(III)-catalyzed Friedel-rafts alkylation-hemiketalization-lactonization cascade of electron-rich hydroxy arenes and distinctively functionalized unsaturated 4-keto esters is developed for the construction of polycyclic bridged 2-chromanol lactones. Following this simple and facile protocol, a broad range of products was prepared in good to excellent yields as a single diastereomer. An unusual conglomerate (enantiomerically pure polymorph) of 3ac is reported along with the absolute stereochemistry, and the remaining products were rigorously confirmed by single-crystal X-ray analysis and analogy.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.9b00614}, author = {Borade, Balasaheb R. and Nomula, Rajesh and Gonnade, Rajesh G. and Kontham, Ravindar} } @article {46246, title = {Fickian yet non-Gaussian behaviour: A dominant role of the intermittent dynamics (vol 146, 134504, 2017)}, journal = {Journal of Chemical Physics}, volume = {151}, year = {2019}, month = {AUG}, type = {Article}, doi = {10.1063/1.5120313}, author = {Acharya, Sayantan and Nandi, Ujjwal Kumar and Bhattacharyya, Sarika Maitra} } @article {46423, title = {Fluorescent carbon nanodots for targeted in vitro cancer cell imaging (vol 4, pg 71, 2016)}, journal = {Applied Materials Today}, volume = {17}, year = {2019}, month = {DEC}, pages = {236-240}, type = {Correction}, issn = {2352-9407}, doi = {10.1016/j.apmt.2019.07.014}, author = {Aiyer, Sandhya and Prasad, Rajendra and Kumar, Manoj and Nirvikar, K. and Jain, Bhanprakash and Kushwaha, Omkar S.} } @inbook {47467, title = {Functionalization of graphene - a critical overview of its improved physical, chemical and electrochemical properties}, booktitle = {Surface Engineering of Graphene}, year = {2019}, pages = {139-173}, publisher = {Springer}, organization = {Springer}, abstract = {Graphene, the 2D allotrope of carbon, is reported to be functionalized with a plethora of organic and inorganic species. This functionalization imparts significant improvement in the physical, chemical and electrochemical properties of graphene. The covalent and non-covalent functionalization of graphene with electron-rich organic moieties and heteroatoms is focused on different sections of this chapter. The focus is laid on the improvement in physical, chemical and electrochemical properties of graphene achieved through this functionalization. The enhancement in electrocatalytic activity of non-metal-doped graphene towards the oxygen reduction reaction, methanol oxidation reaction and photocatalysis is covered. Towards the end, the potential uses of functionalized graphene for selected applications like biosensors, fuel cells and dye-sensitized solar cells are also discussed.}, doi = {10.1007/978-3-030-30207-8_6}, author = {Singh, Ramesh Kumar and Nalajala, Naresh and Kar, Tathagata and Schechter, Alex} } @article {46430, title = {Glycine-induced electrodeposition of nanostructured cobalt hydroxide: a bifunctional catalyst for overall water splitting}, journal = {ChemSusChem}, year = {2019}, month = {NOV}, type = {Article; Early Access}, abstract = {

Herein, an interconnected alpha-Co(OH)(2) structure with a network-like architecture was used as a bifunctional electrocatalyst for the overall water splitting reaction in alkaline medium. The complexing ability of glycine with a transition metal was exploited to form [Co(gly)(3)](-) dispersion at pH 10, which was used for the electrodeposition. High-resolution TEM, UV/Vis-diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy were used to confirm that the as-synthesized materials had an alpha-Co(OH)(2) phase. The electrocatalytic oxygen and hydrogen evolution activity of the glycine-coordinated alpha-Co(OH)(2) was found to be approximately 320 and 145 mV, respectively, at 10 mA cm(-2). The material required approximately 1.60 V (vs. reversible hydrogen electrode; RHE) to achieve the benchmark of 10 mA cm(-2) for overall water splitting with a mass activity of approximately 63.7 A g(-1) at 1.60 V (vs. RHE). The chronoamperometric response was measured to evidence the stability of the material for overall water splitting for up to 24 h. Characterization of the catalyst after the oxygen and hydrogen evolution reactions was performed by XPS and showed the presence of a Co-II/Co-III oxidation state.

}, keywords = {cobalt, Electrochemistry, heterogeneous catalysis, Hydrogen, water splitting}, issn = {1864-5631}, doi = {10.1002/cssc.201902323}, author = {Shilpa, Nagaraju and Nadeema, Ayasha and Kurungot, Sreekumar} } @article {46285, title = {Hepatoprotective cocrystals of isoniazid: synthesis, solid state characterization, and hepatotoxicity studies}, journal = {Crystal Growth \& Design}, volume = {19}, year = {2019}, month = {SEP}, pages = {5161-5172}, type = {Article}, abstract = {

Isoniazid (INH) is one of the first line drugs used in combination with pyrazinamide and rifampicin for the management of tuberculosis. Idiosyncratic hepatotoxicity is one of the most common side effects of antitubercular therapy worldwide. The current study explores solid phase modification of INH by cocrystallization with various hepatoprotective coformers, namely chrysin, hesperetin, silibinin, syringic acid (SYRA), and quercetin (QUE) to address hepatotoxicity concerns. Cocrystals were obtained with SYRA and QUE. Supramolecular synthons based on pyridine-carboxyl and pyridine-hydroxyl synthon enabled the formation of cocrystals. INHSYRA and INHQUE cocrystals were characterized by FT-IR, DSC, and PXRD. Single crystal X-ray analysis of INHSYRA revealed that it crystallized in triclinic system with the P (1) over bar space group. Intrinsic dissolution rate studies (IDR) showed slow drug release from both the cocrystals. Hepatoprotective effects of INHSYRA and INHQUE cocrystals were evaluated by a single toxic dose study and a subchronic study for 28 days. Results from the subchronic study indicated significant increase in ALT, AST, and ALP enzyme levels in the INH-treated group whereas the enzyme levels in INHSYRA and INHQUE cocrystal treated group were comparable to that of the untreated group. This study demonstrates the in vivo hepatoprotective effects of coformers SYRA and QUE provide promising evidence for utility of nutraceutical based coformers, to tackle hepatotoxicity associated with various drugs.

}, doi = {10.1021/acs.cgd.9b00541}, author = {Yadav, Balvant and Gunnam, Anilkumar and Thipparaboina, Rajesh and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {45567, title = {Hierarchical K/LTL zeolite as solid base for aqueous phase hydrogenation of xylose to xylitol}, journal = {Microporous and Mesoporous Materials }, volume = {278}, year = {2019}, month = {APR}, pages = {70-80}, type = {Article}, abstract = {Post-synthesis modification by alkali treatment was employed for the synthesis of hierarchical K/LTL zeolites with varying degree of mesoporosity. For the alkali treatment, the concentration of aqueous KOH solution was changed from 0.3 to 2.8 M keeping the quantity per gram of zeolite fixed. The influence of the alkali concentration on the chemical composition, powder XRD crystallinity, morphology, basicity, and the textural properties of resultant hierarchical zeolites was investigated. Variation in the concentration of KOH solution was found to control the degree of preferential desilication with the preserved structural fingerprint of K/LTL zeolite. As a result, the generation of mesoporosity was observed along with 1) the decrease in the Si/Al ratio and percentage relative crystallinity, and 2) an increase in BET surface area and mesopore volume. 27Al MAS-NMR results showed that all the aluminum atoms present in the tetrahedral coordination after alkali treatment, which provides an elegant approach for significantly increasing the basic sites in the hierarchical zeolites. As a heterogeneous catalyst, the hierarchical K/LTL zeolites demonstrated the improved performance in the hydrogenation of xylose to xylitol as compared to the parent K/LTL zeolite. The different process parameters were assessed in order to maximize the hydrogenation activity. Among all the hierarchical zeolites, the enhanced catalytic activity was shown by the hierarchical K/LTL prepared by using 1.5 M KOH solution when it is used along with the 3.5 wt\% platinum loaded γ-Al2O3 catalyst. This optimum activity may be attributed to the higher surface area, accessible basic sites, nano-sized Pt on γ-Al2O3, and the development of substantial intracrystalline mesoporosity for the enhanced molecular diffusion of reactant to and from the hierarchical zeolite with better-preserved crystallinity.}, doi = {10.1016/j.micromeso.2018.11.017}, author = {Tangale N. P. and Niphadkar, P. S. and Joshi, P. N. and Dhepe, P. L.} } @article {45622, title = {Highly frustrated liquid crystal phases in optically active dimers: synthesis and rich phase transitional behavior}, journal = {New Journal of Chemistry}, volume = {43}, year = {2019}, month = {JAN}, pages = {2148-2162 }, type = {Article}, abstract = {Herein we report on the synthesis and characterization of four new series of optically active, nonsymmetric dimers in which cholesterol is covalently linked to a Schiff base core through an ω-oxyalkanoyl spacer. While the Schiff base core is substituted with n-butyloxy, n-hexyloxy, n-octyloxy, n-decyloxy and n-dodecyloxy tails, three even-parity spacers, namely, 4-oxybutanoyl, 6-oxyhexanoyl, 8-oxyoctanoyl, and an odd-parity spacer, namely, 5-oxypentanoyl, have been used to join the two cores. The experimental results show that the length and parity of the spacer and the length of the terminal tail play a vital role in deciding the phase sequences of the dimers. In general, the dimers possessing an even-parity spacer display enantiotropic LC phases such as chiral nematic (N*), twist grain boundary (TGB), smectic A (SmA), chiral smectic C (SmC*) and twist grain boundary phase with SmC* slabs (TGBC*). Some of these dimers display TGBC* over a wide temperature range. The dimers with an odd-parity (5-oxypentanoyl) spacer display, unlike their even-membered counterparts, blue phases (BPIII/II/I); besides, they stabilize N* and/or unknown smectic (SmX) phases. The circular dichroism (CD) measurements were carried out as a function of temperature on the planar texture formed by three even-membered dimers and an odd-membered dimer. The occurrence of a strong negative CD band in the N* phase of the even-membered dimers suggests a left-handed screw sense of the macroscopic helical structure, and the scenario is opposite in the case of an odd-membered dimer.}, doi = {10.1039/C8NJ03520B}, author = {Nayak, R. A. and Bhat, S. A. and Shanker, G. and Rao, D. S. S. and Yelamaggad, C. V.} } @article {46177, title = {High-performing PGM-free AEMFC cathodes from carbon-supported cobalt ferrite nanoparticles}, journal = {Catalysts}, volume = {9}, year = {2019}, month = {MAR}, pages = {264}, type = {Article}, abstract = {

Efficient and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, cobalt ferrite (CF) nanoparticles supported on Vulcan XC-72 carbon (CF-VC) were created through a facile, scalable solvothermal method. The nano-sized CF particles were spherical with a narrow particle size distribution. The CF-VC catalyst showed good ORR activity, possessing a half-wave potential of 0.71 V. Although the intrinsic activity of the CF-VC catalyst was not as high as some other platinum group metal (PGM)-free catalysts in the literature, where this catalyst really shined was in operating AEMFCs. When used as the cathode in a single cell 5 cm(-2) AEMFC, the CF-VC containing electrode was able to achieve a peak power density of 1350 mW cm(-2) (iR-corrected: 1660 mW cm(-2)) and a mass transport limited current density of more than 4 A cm(-2) operating on H-2/O-2. Operating on H-2/Air (CO2-free), the same cathode was able to achieve a peak power density of 670 mW cm(-2) (iR-corrected: 730 mW cm(-2)) and a mass transport limited current density of more than 2 A cm(-2). These peak power and achievable current densities are among the highest reported values in the literature to date.

}, keywords = {AEMFC, cobalt, Ferrite, high-performing, non-PGM, vulcan}, issn = {2073-4344}, doi = {10.3390/catal9030264}, author = {Peng, Xiong and Kashyap, Varchaswal and Ng, Benjamin and Kurungot, Sreekumar and Wang, Lianqin and Varcoe, John R. and Mustain, William E.} } @article {46286, title = {High-solubility salts of the multiple sclerosis drug teriflunomide}, journal = {Crystal Growth \& Design}, volume = {19}, year = {2019}, month = {SEP}, pages = { 5407-5417}, type = {Article}, abstract = {

Teriflunomide (TFM) is an immunomodulatory prodrug of leflunomide which is used for the treatment of multiple sclerosis (MS). It is a Biopharmaceutics Classification System Class (BCS) II drug with low solubility and high permeability. The X-ray crystal structure of TFM is stabilized by O-H center dot center dot center dot O, C-H center dot center dot center dot O, C-H center dot center dot center dot N, and N-H center dot center dot center dot N interactions. In order to study the solubility and dissolution changes of this drug, five multicomponent crystal forms were prepared with amine and amide generally regarded as safe (GRAS) coformers to improve the physicochemical properties such as solubility, dissolution, diffusion, and phase stability. Equimolar TFM-coformer 1:1 salts were crystallized, except for cytosine which afforded a salt cocrystal toluene solvate TFM-CYT-TOL in a 1:2:1 ratio. The multicomponent forms were crystallized by slow solvent evaporation and characterized by single crystal X-ray diffraction. TFM and coformer are bonded by N+-H center dot center dot center dot O-, N-H center dot center dot center dot O, O-H center dot center dot center dot O, C-H center dot center dot center dot O, C-H center dot center dot center dot N, N-H center dot center dot center dot N, and C-H center dot center dot center dot F interactions. The bulk phase purity of the salts was characterized by powder X-ray diffraction and infrared and thermal techniques. Solubility, dissolution, and diffusion experiments in pH 7.0 buffer exhibited a significant improvement compared to the reference drug. The morphology and particle size of salts by field emission scanning electron microscopy were related to dissolution behavior. The highest solubility, dissolution, and diffusion profile were observed for TFM-MEA and TFM-TEA salts (monoethanol amine and triethanol amine).

}, doi = {10.1021/acs.cgd.9b00914}, author = {Gunnam, Anilkumar and Nangia, Ashwini K.} } @article {46291, title = {In vitro and in silico studies on membrane interactions of diverse Capsicum annuum flower gamma-thionin peptides}, journal = {Proteins-Structure Function and Bioinformatics}, year = {2019}, month = {AUG}, type = {Article; Early Access}, abstract = {

Thionins are small, cysteine-rich peptides that play an important role in plant defense, primarily through their interactions with membranes. Eight novel gamma-thionin peptides (CanThio1-8) were isolated from the flower of Capsicum annuum. Sequence analysis revealed that the peptides cluster into three groups. A representative peptide from each group (CanThio1, 2, and 3) was used for experimental characterization. Interestingly, peptides were found to possess some cytotoxic activity against normal human embryonic kidney cell line but higher cytotoxicity against cancer cell line MCF-7. CanThio3 peptide was chosen as a representative peptide to study the molecular mechanism of action on membranes. Microsecond timescale atomistic simulations of CanThio3 were performed in the presence of a POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) lipid bilayer. Simulations revealed that CanThio3 interacts with the bilayer and causes lipid thinning in the vicinity. Nonpolar amino acids specific to the alpha-core region of CanThio3 along with nonpolar residues in the gamma-core region are seen to interact with the lipid tails. The differences in the amino acid sequence of CanThio peptides in these regions explain the variability in cytotoxic activities. In summary, our results demonstrate the membrane-mediated activity of a novel series of gamma-thionin peptides from C. annuum.

}, keywords = {Capsicum annuum, Cytotoxicity, gamma-thionin, MD simulations, Membrane}, issn = {0887-3585}, doi = {10.1002/prot.25791}, author = {Nikte, Siddhanta and Gahankari, Apurva and Mulla, Javed and Sengupta, Durba and Joshi, Manali and Tamhane, Vaijayanti} } @article {45500, title = {Integrative omics analysis in Pandanus odorifer (Forssk.) Kuntze reveals the role of Asparagine synthetase in salinity tolerance}, journal = {Scientific Reports}, volume = {9}, year = {2019}, month = {JAN }, pages = {Article Number: 932}, type = {Article}, abstract = {

Pandanus odorifer (Forssk) Kuntze grows naturally along the coastal regions and withstands salt-sprays as well as strong winds. A combination of omics approaches and enzyme activity studies was employed to comprehend the mechanistic basis of high salinity tolerance in P. odorifer. The young seedlings of P. odorifer were exposed to 1 M salt stress for up to three weeks and analyzed using RNAsequencing (RNAseq) and LC-MS. Integrative omics analysis revealed high expression of the Asparagine synthetase (AS) (EC 6.3.5.4) (8.95 fold) and remarkable levels of Asparagine (Asn) (28.5 fold). This indicated that salt stress promoted Asn accumulation in P. odorifer. To understand this further, the Asn biosynthesis pathway was traced out in P. odorifer. It was noticed that seven genes involved in Asn bisynthetic pathway namely glutamine synthetase (GS) (EC 6.3.1.2) glutamate synthase (GOGAT) (EC 1.4.1.14), aspartate kinase (EC 2.7.2.4), pyruvate kinase (EC 2.7.1.40), aspartate aminotransferase (AspAT) (EC 2.6.1.1), phosphoenolpyruvate carboxylase (PEPC) (EC 4.1.1.31) and AS were up-regulated under salt stress. AS transcripts were most abundant thereby showed its highest activity and thus were generating maximal Asn under salt stress. Also, an up-regulated Na+/H+ antiporter (NHX1) facilitated compartmentalization of Na+ into vacuoles, suggesting P. odorifer as salt accumulator species.

}, issn = {2045-2322}, doi = {10.1038/s41598-018-37039-y}, author = {Rashmi, Deo and Barvkar, Vitthal T. and Nadaf, Altafhusain and Mundhe, Swapnil and Kadoo, Narendra Y.} } @article {46214, title = {Ionic liquid-responsive phase transfer of gold nanoparticles: anionic metathesis}, journal = {Langmuir}, volume = {35}, year = {2019}, month = {JULY}, pages = {9213-9218}, type = {Article}, abstract = {

In this work, a fresh approach has been proposed for the efficient transfer of gold nanoparticles (AuNPs) from an aqueous to organic phase by the metathesis reaction or anion exchange reaction. Here, we synthesized ionic liquid 1-butyl 3-hexadecyl imidazolium bromide [C(4)C1(6I)m]-Br-stabilized AuNPs which exhibit excellent stability in solution. Transfer of Au@[C(4)C(16)Im]Br from an aqueous to organic phase was investigated by the metathesis reaction with different hydrophobic ionic liquid-forming salts such as LiNTf2, LiClO4, and KPF6. The anionic exchange process in ionic liquids at the AuNP surface to make hydrophilic to hydrophobic AuNPs is demonstrated. It was found that hydrophobic ionic liquids provide the most effective transfer of AuNPs from the aqueous to organic phase. Interestingly, we have noticed no change in color, size, and shape of AuNPs for more than a month, indicating more efficient transfer of AuNPs in organic solvents, which remained stable for over a month. The ionic liquids with anions NTf2-, ClO4-, and PF6- make the AuNP surface hydrophobic, indicating their good dispersibility in nonpolar solvents. Finally, these AuNPs exhibit excellent sensitivity toward the refractive index of organic solvents, which is correlated with the surface plasmon resonance (SPR) lambda(SPR) bands.

}, doi = {10.1021/acs.langmuir.9b01223}, author = {Thawarkar, Sachin and Nirmale, Trupti C and More, Sahebrao and Ambekar, Jalindar D and Kale, Bharat B and Khupse, Nageshwar D} } @article {45611, title = {Light-triggered, spatially localized chemistry by photoinduced electron transfer}, journal = {Angewandte Chemie-International Edition}, volume = {58}, year = {2019}, month = {FEB}, pages = {2715-2719}, type = {Article}, abstract = {

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross-linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.

}, doi = {10.1002/anie.201812700}, author = {Usgaonkar, S. and Deshmukh, S. and Biswas, B. and Karjule, N. and Yadav, P. and Nithyanandhan, J. and Kumaraswamy, G.} } @article {46330, title = {Molecular cobalt(II) complexes for tau polymerization in Alzheimer{\textquoteright}s disease}, journal = {ACS Omega }, volume = {4}, year = {2019}, month = {OCT}, pages = {16702-16714}, type = {Article}, abstract = {

Tau is an axonal protein known to form abnormal aggregates and is the biomarker of Alzheimer{\textquoteright}s disease. Metal-based therapeutics for inhibition of Tau aggregation is limited and rarely reported in contemporary science. Here, we report the first example of rationally designed molecular cobalt(II)-complexes for effective inhibition of Tau and disaggregation of preformed Tau fibrils. The mechanistic studies reveal that prevention of Tau aggregation by cobalt-based metal complexes (CBMCs) is concentration-dependent and Tau seldom exhibits conformational changes. Interestingly, CBMCs play dual role in causing disassembly of preformed aggregates as well as inhibition of complete Tau aggregation. Furthermore, CBMCs were nontoxic and maintained the tubulin network intact. CBMCs also prevented okadaic acid-induced toxicity in SH-SY5Y cells thus, preventing hyperphosphorylation of Tau. We believe that this unprecedented finding by the newly developed molecular complexes has a potential toward metal-based therapeutics for Alzheimer{\textquoteright}s disease.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b00692}, author = {Gorantla, Nalini Vijay and Landge, Vinod G. and Nagaraju, Pramod Gudigenahally and Priyadarshini, Poornima C. G. and Balaraman, Ekambaram and Chinnathambi, Subashchandrabose} } @article {47168, title = {Molecular dynamics study on growth of carbon dioxide and methane hydrate from a seed crystal}, journal = {Chinese Journal of Chemical Engineering}, volume = {27}, year = {2019}, month = {SEP}, pages = {2074-2080}, type = {Article}, abstract = {

In the current work, molecular dynamics simulation is employed to understand the intrinsic growth of carbon dioxide and methane hydrate starting from a seed crystal of methane and carbon dioxide respectively. This comparison was carried out because it has relevance to the recovery of methane gas from natural gas hydrate reservoirs by simultaneously sequestering a greenhouse gas like CO2. The seed crystal of carbon dioxide and methane hydrate was allowed to grow from a super-saturated mixture of carbon dioxide or methane molecules in water respectively. Two different concentrations (1:6 and 1:8.5) of CO2/CH4 molecules per water molecule were chosen based on gas-water composition in hydrate phase. The molecular level growth as a function of time was investigated by all atomistic molecular dynamics simulation under suitable temperature and pressure range which was well above the hydrate stability zone to ensure significantly faster growth kinetics. The concentration of CO2 molecules in water played a significant role in growth kinetics, and it was observed that maximizing the CO2 concentration in the aqueous phase may not result in faster growth of CO2 hydrate. On the contrary, methane hydrate growth was independent of methane molecule concentration in the aqueous phase. We have validated our results by performing experimental work on carbon dioxide hydrate where it was seen that under conditions appropriate for liquid CO2, the growth for carbon dioxide hydrate was very slow in the beginning. (C) 2019 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd. All rights reserved.

}, keywords = {Cage dynamics, CH4 recovery, CO2 sequestration, F-4 order parameter, kinetics, Natural gas hydrate, Thermodynamics}, issn = {1004-9541}, doi = {10.1016/j.cjche.2019.02.006}, author = {Nakate, Prajakta and Ghosh, Bappa and Das, Subhadip and Roy, Sudip and Kumar, Rajnish} } @article {47473, title = {Morphological and molecular characterization of Penicillium rubens sp.nov isolated from poultry feed}, journal = {Indian Phytopathology}, volume = {72}, year = {2019}, month = {SEP}, pages = {461{\textendash}478}, type = {Article}, abstract = {Fungi are the second largest group of eukaryotic organisms, estimates ranging from 2.2 to 3.8 million and 120,000 currently accepted species. Unfortunately, identification of Penicillium species is an overwhelming task even for taxonomic experts. In the current study, we isolated identified and morphologically characterized Penicillium rubens strain NCIM-1397. Molecular characterization of P. rubens by multilocus sequence analysis (MLSA) of internal transcribed spacer (ITS) region, β-tubulin (BenA), calmodulin (CaM), NL (D1/D2 region) and LR (large subunit region) gene. Conversely, BenA gene differentiated P. rubens from P. chrysogenum. Moreover, Vitek MS, Matrix-assisted laser desorption ionization{\textendash}time of flight mass spectrometer (MALDI-TOF{\textendash}MS) failed to discriminate to strain level. Metabolic profiling of P. rubens enable to produce roquefortine C, chrysogine, meleagrine, sorbicillin and non-producers for industrially important metabolite, penicillin determined by LC{\textendash}MS. Even, In addition, even molecular detection of penicillin biosynthetic pathway genes, PcbC, PenDE and Phl were negative by PCR. Nevertheless, P. rubens showed 90{\textendash}100\% toxicity/pathogenicity on seed germination of sorghum (Sorghum bicolor) and no further development of coleoptiles, radicle and leaf length observed. Also, it showed non-toxic to animal cell determined on Human foreskin fibroblast (HFF) cell line by In-Vitro.}, doi = {10.1007/s42360-019-00165-2}, author = {Sawant, Amol M. and Vankudoth, Ramu and Navale, Vishwambar and Kumavat, Rajkamal and Kumari, Prabla and Santhakumari, B. and Vamkudoth, Koteswara Rao} } @article {47152, title = {Morphology of ammonium perchlorate in the presence of ethylene glycol as an additive: a first principle study}, journal = {Crystengcomm}, volume = {21}, year = {2019}, month = {DEC}, pages = {7519-7527}, type = {Article}, abstract = {

Ammonium perchlorate (AP) is an extensively used crystalline oxidizer in high energy materials and their compositions. A desired morphology of AP is crucial for the high burn rates of solid propellants. We have examined the habit modification of AP crystals in the absence and presence of ethylene glycol as an impurity by means of important parameters such as interaction and surface energies to predict the resultant morphology. On the basis of first principles density functional theory (DFT) calculations of the binding and surface energies before and after the adsorption of the surface-capping agent (ethylene glycol) on the AP surfaces, we have shown that the relative stability of all the important surfaces (100), (101), (011), (001) and (210) rationalize the habit modification of AP crystals. In accordance with the surface energy calculations, the stability order of the five crystallographic surfaces of AP was found to be (001) \> (210) \> (101) \> (100) \> (011) in the absence of additive molecules, i.e., in the clean surfaces. This result is in concurrence with the fact that AP crystals richly contain (001) planes when grown in the absence of an additive. The computational methodology applied for the determination of surface energies was found to be reliable as it has well reproduced the stability trend of AP surfaces. However, the trend, (210) \> (001) \> (101) \> (011) \> (100), was observed when these surfaces were capped with a known additive molecule, i.e., ethylene glycol. The crystal habit of AP in the presence of ethylene glycol is such that the intensity of the lattice plane (2 1 0) of the modified AP was remarkably high leading to the shape of hexahedral, which is in excellent agreement with the experimental results. A linear fit correlation was also observed between surface energies and interaction energy values for the additive adsorbed AP surfaces.

}, issn = {1466-8033}, doi = {10.1039/c9ce01262a}, author = {Khan, Md Abdul Shafeeuulla and Vijayalakshmi, R. and Singh, Avtar and Nandi, Amiya Kumar and Talawar, M. B.} } @article {46052, title = {[MoS4](2-)-Intercalated NiCo-layered double hydroxide nanospikes: an efficiently synergized material for urine to direct H-2 generation}, journal = {ACS Applied Materials \& Interfaces}, volume = {11}, year = {2019}, month = {JUL }, pages = {25917-25927}, type = {Article}, abstract = {

Substituting the energy-uphill water oxidation half-cell with readily oxidizable urea-rich urine, a ground-breaking bridge is constructed, combining the energy-efficient hydrogen generation and environmental 6 protection. Hence, designing a robust multifunctional electrocatalyst is desirable for widespread implementation of this waste to fuel technology. In this context, here, we report a simple tuning of the electrocatalytically favorable characteristics of NiCo-layered double hydroxide by introducing [MoS4]2- in its interlayer space. The [MoS4]{\textquoteright} insertion as well as its effect on the electronic structure tuning is thoroughly studied via X-ray photoelectron spectroscopy in combination with electrochemical analysis. This insertion induces overall electronic structure tuning of the hydroxide layer in such a way that the designed catalyst exhibited favorable kinetics toward all the required reactions of hydrogen generation. This is why our homemade catalyst, when utilized both as a cathode and anode to fabricate a urea electrolyzer, required a mere X1.37 V cell potential to generate sufficient H2 by reaching the benchmark 10 mA cm-2 in 1 M KOH/0.33 M urea along with long-lasting catalytic efficiency. Other indispensable reason of selecting [MoS4]2- is its high-valent nature making the catalyst highly selective and insensitive to common catalyst-poisoning toxins of urine. This is experimentally supported by performing the real urine electrolysis, where the nanospike-covered Ni foam-based catalyst showed a performance similar to that of synthetic urea, offering its industrial value. Other intuition of selecting [MoS4]2- was to provide a ligand-based mechanism for hydrogen evolution half-cell [hydrogen evolution reaction (HER)] to preclude the HER-competing oxygen reduction. Another crucial point of our work is its potential to avoid the mixing of two explosive product gases, that is, H2 and O-2.

}, keywords = {hydrogen evolution reaction, Layered double hydroxide, nickel oxyhydroxide, sewage denitrification, urea oxidation reaction, urine/urea electrolysis}, issn = {1944-8244}, doi = {10.1021/acsami.9b06545}, author = {Nadeema, Ayasha and Kashyap, Varchaswal and Gururaj, Rakshitha and Kurungot, Sreekumar} } @article {46059, title = {New cardo bisphenol monomer containing pendant azido group and the resulting aromatic polyesters}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {57}, year = {2019}, month = {JUL }, pages = {1516-1526}, type = {Article}, abstract = {

Expanding on our strategy to synthesize aromatic step-growth polymers containing pendant clickable azido groups via functional monomer approach, we have now designed and synthesized a new cardo bisphenol, viz., 2-(2-azidoethyl)-3, 3-bis(4-hydroxyphenyl) isoindolin-1-one (PPH-N-3). PPH-N-3 was conveniently synthesized starting from commercially available phenolphthalein by a three-step route in an overall yield of 65\% using simple organic transformations. Aromatic (co)polyesters bearing pendant azido groups were synthesized by low-temperature solution polycondensation of PPH-N-3 or different molar ratios of PPH-N-3 and bisphenol-A (BPA) with aromatic diacid chlorides in dry dichloromethane in the presence of triethylamine (TEA) as a base. The formation of medium to reasonably high-molecular-weight (co)polyesters was evidenced from intrinsic viscosity and number-average molecular-weight measurements that were in the range 0.52-0.85 dL/g and 16,700-28,200, respectively. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polyesters. (Co)polyesters were characterized using FTIR, H-1 NMR, C-13 NMR spectroscopy, XRD, and TGA. The thermal curing reaction of (co)polyesters involving decomposition of azido groups was studied by DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using catalyst-free azide-maleimide cycloaddition reaction with two maleimides, namely, N-methylmaleimide and N-hexylmaleimide. (c) 2019 Wiley Periodicals, Inc.

}, keywords = {aromatic (co)polyester, azido group, cardo bisphenol, Chemical modification}, issn = {0887-624X}, doi = {10.1002/pola.29414}, author = {Maher, Deepak M. and Nagane, Samadhan S. and Jadhav, Uday A. and Salunkhe, Pravin H. and Tawade, Bhausaheb V. and Wadgaonkar, Prakash P.} } @article {46309, title = {New enantioselective synthesis of antiobesity drug lorcaserin}, journal = {New Journal of Chemistry}, volume = {43}, year = {2019}, month = {NOV }, pages = {16876-16880}, type = {Article}, abstract = {

A simple and efficient enantioselective synthesis of anti-obesity drug lorcaerin starting from easily accessible 3-chlorostyrene oxide has been described for the first time employing hydrolytic kinetic resolution as a source of chirality. The protocol might also be useful in the synthesis of structural variants of lorcaserin.

}, issn = {1144-0546}, doi = {10.1039/c9nj04234b}, author = {Ghotekar, Ganesh S. and More, Devidas A. and Nalla, Viswanadh and Muthukrishnan, M.} } @article {46172, title = {Nuclear parity- and time-reversal-symmetry violation in the (HgH)-Hg-201 molecule}, journal = {Physical Review A}, volume = {99}, year = {2019}, month = {MAR }, pages = {032503}, type = {Article}, abstract = {

Investigation of the nuclear magnetic quadrupole moment (MQM) is an excellent way to reveal the new physics in the hadron sector of matter. Therefore, we investigate the violation of parity (P) and time-reversal (T) invariance induced by the MQM of the( 201) Hg nucleus in the HgH molecule, which has been proposed as a very promising candidate for the experimental search of the electric dipole moment of electron [M. G. Kozlov and A. Derevianko, Phys. Rev. Lett. 97, 063001 (2006)]. We report the precise value of the molecular parameter, W-M, associated with the P, T-odd nuclear MQM-electron interaction in (HgH)-Hg-201 using the four-component relativistic coupled-cluster method. This parameter is required to interpret the experimental P, T-odd frequency shift in terms of the MQM of nuclei. Furthermore, the magnetic hyperfine structure (HFS) constants of the molecule are computed at the same level of theory. We also study the role of core-correlating functions and the virtual energy functions in the calculations of the HFS constant and W-M. The most reliable value of W(M )in HgH is obtained as 3.22 x 10 (33) Hz/e cm (2) with an uncertainty of around 6\%.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.99.032503}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {45527, title = {Operando X-ray absorption spectroscopy study of the Fischer-Tropsch reaction with a Co catalyst}, journal = {Journal of Synchrotron Radiation}, volume = {26}, year = {2019}, month = {JAN}, pages = {137-144}, type = {Article}, abstract = {

This article describes the setting up of a facility on the energy-scanning EXAFS beamline (BL-09) at RRCAT, Indore, India, for operando studies of structure-activity correlation during a catalytic reaction. The setup was tested by operando X-ray absorption spectroscopy (XAS) studies performed on a Co-based catalyst during the Fischer-Tropsch reaction to obtain information regarding structural changes in the catalyst during the reaction. Simultaneous gas chromatography (GC) measurements during the reaction facilitate monitoring of the product gases, which in turn gives information regarding the activity of the catalyst. The combination of XAS and GC techniques was used to correlate the structural changes with the activity of the catalyst at different reaction temperatures. The oxide catalyst was reduced to the metallic phase by heating at 400 degrees C for 5h under H-2 at ambient pressure and subsequently the catalytic reaction was studied at four different temperatures of 240, 260, 280 and 320 degrees C. The catalyst was studied for 10h at 320 degrees C and an attempt has been made to understand the process of its deactivation from the XANES and EXAFS results.

}, keywords = {catalysis, EXAFS, Fischer-Tropsch reaction, in situ studies, structure-activity correlation, XANES}, issn = {1600-5775}, doi = {10.1107/S1600577518015588}, author = {Nayak, Chandrani and Jain, Preeti and Vinod, C. P. and Jha, S. N. and Bhattacharyya, D.} } @article {45620, title = {Paintable room-temperature phosphorescent liquid formulations of alkylated bromonaphthalimide}, journal = {Angewandte Chemie - International Edition}, volume = {58}, year = {2019}, month = {FEB}, pages = {2284-2288}, type = {Article}, abstract = {Organic phosphors have been widely explored with an understanding that crystalline molecular ordering is a requisite for enhanced intersystem crossing. In this context, we explored the room-temperature phosphorescence features of a solvent-free organic liquid phosphor in air. While alkyl chain substitution varied the physical states of the bromonaphthalimides, the phosphorescence remained unaltered for the solvent-free liquid in air. As the first report, a solvent-free liquid of a long swallow-tailed bromonaphthalimide exhibits room-temperature phosphorescence in air. Doping of the phosphor with carbonyl guests resulted in enhanced phosphorescence, and hence a large-area paintable phosphorescent liquid composite with improved lifetime and quantum yield was developed.}, doi = {10.1002/anie.201811834}, author = {Goudappagouda and Manthanath, A. and Wakchaure, V. C. and Ranjeesh, K. C. and Das, T. and Vanka, K. and Nakanishi, T. and Babu, S. S.} } @article {46139, title = {Palladium impregnated amine Co-condensed hexagonal mesoporous silica: a novel catalyst in tailoring suzuki and heck coupling reactions in base free condition}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {APR }, pages = {3823-3832}, type = {Article}, abstract = {

Palladium impregnated amine co-condensed hexagonal mesoporous silicas (HMS-X) were synthesized (sol-gel process) using different amines (Ethylene diamine and pyridine) of various concentrations (0.25 equiv. and 2 equiv.). The effect of amine concentration on the local structure of hexagonal mesoporous silica was studied. The catalyst shows excellent catalytic activity and high TOF towards both Suzuki and Heck coupling reactions without using any base in reaction medium with the solvent DMF:water in (1:1) ratio. The catalyst was reused and it was recyclable up to three cycle without any appreciable loss of activity and the kinetics of the reaction varying different parameters also have been studied thoroughly.

}, keywords = {Amine functionalized silica, Base free, Heck reaction, Palladium supported catalysts, Suzuki reaction}, issn = {2365-6549}, doi = {10.1002/slct.201803485}, author = {Das, Prangya Paramita and Prabhakaran, Vinod C. and Nanda, Samik and Sen, Debasis and Chowdhury, Biswajit} } @article {46171, title = {Partially bio-based aromatic poly(ether sulfone)s bearing pendant furyl groups: synthesis, characterization and thermo-reversible cross-linking with a bismaleimide}, journal = {Polymer Chemistry}, volume = {10}, year = {2019}, month = {MAR }, pages = {1089-1098}, type = {Article}, abstract = {

A fully bio-based bisphenol bearing pendant furyl group, viz., 4,4{\textquoteright}-(furan-2-ylmethylene) bis(2-methoxyphenol) (BPF) was synthesized by base-catalyzed condensation of furfural with guaiacol. New partially bio-based (co) poly(ether sulfone) s bearing pendant furyl groups were synthesized via aromatic nucleophilic substitution polycondensation of BPF and various mixtures of BPF and bisphenol-A with bis(4-fluorophenyl) sulfone in N, N-dimethylacetamide as a solvent. (Co) poly(ether sulfone) s showed inherent viscosities in the range 0.92-1.47 dL g(-1) and number average molecular weights ((M-n) over bar), obtained from GPC, were in the range 91 300-131 000 g mol(-1). (Co) poly(ether sulfone) s could be cast into tough, transparent and flexible films from chloroform solutions. (Co)poly(ether sulfone)s showed 10\% weight loss in the temperature range 431-481 degrees C and DSC showed T-g in the range 179-190 degrees C. Tensile strength, Young{\textquoteright}s modulus and elongation at break, obtained from tensile testing of (co) poly(ether sulfone) s containing pendant furyl groups, were in the range 76.7-83.8 MPa, 1.02-1.18 GPa and 21.4-89.7\%, respectively. Most interestingly, pendant furyl groups in (co) poly(ether sulfone) s provide reactive sites for click modification and cross-linking via Diels-Alder reaction with maleimides and bismaleimides, respectively. Crosslinked (co) poly(ether sulfone) was prepared via Diels-Alder reaction of a representative (co) poly(ether sulfone) containing pendant furyl groups with 1,1{\textquoteright}-(methylenedi-1,4-phenylene) bismaleimide (BMI) at 60 degrees C. The formation of cross-linked poly(ether sulfone) was demonstrated by gelation tests, solubility tests and DSC. The cross-linked copoly(ether sulfone) prepared using BMI showed enhanced tensile strength and Young{\textquoteright}s modulus compared to parent copoly(ether sulfone) and was recycled two times with retention of mechanical properties.

}, issn = {1759-9954}, doi = {10.1039/c8py01477a}, author = {Nagane, Samadhan S. and Kuhire, Sachin S. and Mane, Shivshankar R. and Wadgaonkar, Prakash P.} } @article {46439, title = {Photoexcited toluidine blue inhibits tau aggregation in Alzheimer{\textquoteright}s disease}, journal = {Acs Omega}, volume = {4}, year = {2019}, month = {NOV }, pages = {18793-18802}, type = {Article}, abstract = {

The aggregates of microtubule-associated protein Tau are considered as a major hallmark of Alzheimer{\textquoteright}s disease. Tau aggregates accumulate intracellularly leading to neuronal toxicity. Numerous approaches have been targeted against Tau protein aggregation, which include application of synthetic and natural compounds. Toluidine blue is a basic dye of phenothiazine family, which on irradiation with a 630 nm light gets converted into a photoexcited form, leading to generation of singlet oxygen species. Methylene blue is the parent compound of toluidine blue, which has been reported to be potent against tauopathy. In the present work, we studied the potency of toluidine blue and photoexcited toluidine blue against Tau aggregation. Biochemical and biophysical analyses using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, ThS fluorescence, circular dichroism spectroscopy, and electron microscopy suggested that toluidine blue inhibited the aggregation of Tau in vitro. The photoexcited toluidine blue potentially dissolved the matured Tau fibrils, which indicated the disaggregation property of toluidine blue. The cell biology studies including the cytotoxicity assay and reactive oxygen species (ROS) production assay suggested toluidine blue to be a biocompatible dye as it reduced ROS levels and cell death. The photoexcited toluidine blue modulates the cytoskeleton network in cells, which was supported by immunofluorescence studies of neuronal cells. The studies in a UAS Tau E14 transgenic Drosophila model suggested that photoexcited toluidine blue was potent to restore the survival and memory deficits of Drosophila. The overall finding of our studies suggested toluidine blue to be a potent molecule in rescuing the Tau-mediated pathology by inhibiting its aggregation, reducing the cell death, and modulating the tubulin levels and behavioral characteristics of Drosophila. Thus, toluidine blue can be addressed as a potent molecule against Alzheimer{\textquoteright}s disease.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b02792}, author = {Dubey, Tushar and Nalini, Gorantla Vijay and Chandrashekara, Kagepura Thammaiah and Chinnathambi, Subashchandrabose} } @article {46421, title = {pi-Extended cis-configured unsynimetrical squaraine dyes for dye-sensitized solar cells: panchromatic response}, journal = {ACS Applied Energy Materials}, volume = {2}, year = {2019}, month = {DEC}, pages = {8464-8472}, type = {Article}, abstract = {

{Light absorbing sensitizer is the heart of the third generation photovoltaic technologies such as dye sensitized solar cells. Despite possessing large extinction coefficients for the metal-free organic dyes, the light harvesting efficiency is limited with the narrow absorption 20 profile in either visible or NIR regions of the solar spectrum. Though monolayer formation of organic sensitizers on semiconducting metal oxide surface leads to dye-dye interaction that leads to broadening the absorption profile, the contribution of the aggregated state to the power conversion process is found out to be poor. Here, we have engineered far-red active pi-extended cis-configured unsymmetrical squaraine dyes with carboxylic acid and cycnoacetic acid as anchoring groups with controlled aggregation and panchromatic light absorption by including the steric and electronic factors. The presence of sp(3)-C (out-of-plane) and N-alkyl (in-plane) groups played an important role in modulating the assembly of the dyes on the TiO2 electrode; the cis-squaraine unit helps to extend the conjugation in the NIR region besides enhancing the visible transition and the incident photon-to-current conversion efficiency profile that showed the importance of anchoring groups for the panchromatic response. Dye PSQ10 showed solar-to electric conversion with an onset of 850 nm with the device performance of 7.0\% (V-oc = 0.581 V, J(sc) = 17.06 mA/cm(2)

}, keywords = {cis-squaraine dyes, Dye aggregation, Dye-sensitized solar cells, extended far-red absorption, panchromatic response}, issn = {2574-0962}, doi = {10.1021/acsaem.9b01341}, author = {Punitharasu, Vellimalai and Kavungathodi, Munavvar Fairoos Mele and Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {46140, title = {Pressure-induced phase transitions in germanium telluride: raman signatures of anharmonicity and oxidation}, journal = {Physical Review Letters}, volume = {122}, year = {2019}, month = {APR }, pages = {145701}, type = {Article}, abstract = {

Pressure-induced phase transitions in GeTe, a prototype phase change material, have been studied to date with diffraction which is not sensitive to anharmonicity-induced dynamical effects. GeTe is also prone to surface oxidation which may compromise surface sensitive measurements. These factors could be responsible for the lack of clarity about the phases and transitions intervening in the phase diagram of GeTe. We have used high-pressure Raman scattering and ab initio pseudopotential density functional calculations to unambiguously establish the high-pressure phase diagram and identify three phases up to 57 GPa, a low-pressure rhombohedral phase, an intermediate pressure cubic phase, and a high-pressure orthorhombic phase. We detect substantial broadening and softening of Raman modes at low pressure and identify the transition regions and possible intermediate phases.

}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.122.145701}, author = {Pawbake, Amit and Bellin, Christophe and Paulatto, Lorenzo and Beneut, Keevin and Biscaras, Johan and Narayana, Chandrabhas and Late, Dattatray J. and Shukla, Abhay} } @article {46209, title = {Probing the effect of selenium substitution in kesterite-Cu2ZnSnS4 nanocrystals prepared by hot injection method}, journal = {Journal of Materials Science-Materials in Electronics }, volume = {30}, year = {2019}, month = {AUG}, pages = {14781-14790}, type = {Article}, abstract = {

In this paper, we report the effect of sulfur (S) substitution with selenium (Se) in CZTS nanocrystals prepared by hot injection method. The formation of kesterite-copper zinc tin sulfide (Cu2ZnSnS4, CZTS) and copper zinc tin selenide (Cu2ZnSnSe4, CZTSe) nanocrystals is confirmed by X-ray diffraction (XRD), Raman spectroscopy and transmission electron microscopy (TEM) analysis. The XRD, TEM and atomic force microscopy (AFM) analysis shows an overall increase in average crystallite size upon Se substitution. AFM images revealed an increase in root mean square surface roughness (S-q) and average surface roughness (S-a) when S in CZTS is replaced by Se. The substitution of S by Se in host CZTS narrows the optical band gap from 1.56 to 1.03 eV. The ultraviolet photoelectron spectroscopy (UPS) analysis shows shift in valence band and conduction band edge in CZTSe compared to CZTS. The photocurrent density measurement in synthesized CZTSe thin films is similar to 4 to 5 times higher than CZTS thin films. The obtained results show that CZTSe can be a promising candidate as absorber material in photovoltaic applications.

}, doi = {10.1007/s10854-019-01851-7}, author = {Pandharkar, Subhash and Rondiya, Sachin and Bhorde, Ajinkya and Nair, Shruthi and Aher, Rahul and Vairale, Priti and Waghmare, Ashish and Naik, Dhirsing and Waykar, Ravindra and Jadhav, Yogesh} } @article {46007, title = {Quantification of niclosamide polymorphic forms - a comparative study by Raman, NIR and MIR using chemometric techniques}, journal = {Talanta}, volume = {199}, year = {2019}, month = {JUL }, pages = {679-688}, type = {Article}, abstract = {

Niclosamide, an anthelmintic drug recently repurposed for its activity against cancer, crystallizes into three solvated forms, two monohydrates (NHa, NHb) and one anhydrous (NAn) form. NAn is sensitive to pseudopolymorphic transformations that affect its dissolution and consequently, its bioavailability. NAn exhibits a polymorphic conversion to metastable monohydrate (NHa) form during high-energy milling in presence of poorly soluble solvents like water. It is hence very important to quantify polymorphic conversion from NAn to NHa, as water is a commonly used solvent during various processing like ball milling and wet granulation. This main objective of the study was to examine the feasibility of Raman, NIR and MIR spectroscopic techniques for identification and quantification of polymorphic forms of niclosamide in binary mixtures and multicomponent mixtures. Calibration models were developed and validated by vibrational spectroscopic techniques in binary mixtures of NAn and NHa and in multicomponent mixtures by chemometric techniques. These techniques were further used to identify and quantify NHa during ball milling, granulation and in presence of other polymorphic forms of niclosamide. Identification and quantification of pseudopolymorphs in binary and multicomponent mixtures with an acceptable recovery of 100.13-102.99\% for Raman and 100.07-101.28\% for NIR with low \% RSD of 2.38-3.12 for both techniques were obtained. The \% NHa determined during ball milling and granulation was similar by NIR and Raman. Raman spectroscopy however showed a greater advantage over other techniques in determining the NHa in presence of NHb due to significant difference in the spectral region of hydrates, when compared to NIR and MIR.

}, keywords = {Ball milling, Granulation, MSC, PLS, Polymorphic conversion, spectroscopy}, issn = {0039-9140}, doi = {10.1016/j.talanta.2019.03.027}, author = {Bhavana, Valmala and Chavan, Rahul B. and Mannava, M. K. Chaitanya and Nangia, Ashwini and Shastri, Nalini R.} } @article {46109, title = {Rapid and efficient sequestration of arsenic from contaminated water using hypertolerant Bacillus L-148 sp.: a two-step process}, journal = {Green Chemistry}, volume = {21}, year = {2019}, month = {MAY }, pages = {2245-2251}, type = {Article}, abstract = {

A fast, robust and green bioreactor for arsenic sequestration from contaminated water was designed. In the two-tier bioreactor, bacterial arsenite detoxification (1 mM) was carried out followed by precipitation of arsenate in 5 min. The precipitate could be used for supercapacitor applications. This bioreactor yielded arsenic free water, therefore, this method can be adopted for scale-up. The combination of hypertolerant bacteria and fast precipitation indicates the robustness of this pilot bioreactor.

}, issn = {1463-9262}, doi = {10.1039/c9gc00878k}, author = {Bagade, Aditi and Nandre, Vinod and Ghosh, Sayanti and Battu, Shateesh and Haram, Santosh and Giri, Ashok and Kodam, Kisan} } @article {45569, title = {Rapid and greener method for utilization of plaster of paris (POP) waste generated from biomedical samples}, journal = {International Journal of Environmental Science and Technology}, volume = {16}, year = {2019}, month = {OCT}, pages = {2475-2480}, type = {Article}, abstract = {

Plaster of Paris (POP) is one of the recalcitrant wastes generated from dentistry and orthopaedic materials used in healthcare sector. The current practice of disposal of POP waste-harbouring biomedical material by incineration is very critical and environmentally unfriendly. The eco-friendly and rapid disintegration of such biomedical-related POP waste was done by treating with ammonium bicarbonate solution (20\% w/v ABC) to form non-hazardous products like ammonium sulphate and calcium carbonate in the form of sludge. The ammonium sulphate (NH4)2SO4 is generally used in agriculture as a chemical fertilizer and calcium carbonate (CaCO3) as an additive in construction sector making this process cost-effective and value addition. Interestingly, 20\% ABC solution also had significant antibiofilm, antimicrobial activity against fungi, yeast and bacterial strains probably due to its high pH-driven osmotic effect. Therefore, 20\% ABC solution finds dual eco-friendly application in disinfection of used POP, especially arising from biomedical waste from patients.

}, keywords = {Biomedical waste, Eco-friendly disintegration, Plaster of Paris waste}, issn = {1735-1472}, doi = {10.1007/s13762-018-2070-7}, author = {Navale, G.R. and Gohil, K.N. and Puppala, K.R. and Shinde, S.S. and Umbarkar, S. and Dharne, M.S.} } @article {46332, title = {Regioselective one-pot synthesis of 3-fluoro-imidazo[1,2-a]pyridines from styrene}, journal = {Asian Journal of Organic Chemistry}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

A one-pot synthesis of C-3 fluorinated imidazopyridines (F-IMPY) is reported under the additive-free conditions from commercially available styrene and 1-fluoropyridinium tetrafluoroborate as a fluorine source. The substrate styrene undergoes keto-bromination/condensation/fluorination transformation in three sequential steps to furnish F-IMPY. This one-pot synthesis method exhibits broad substrate scope and good functional group tolerance with a good yield (up to 82\%).

}, keywords = {fluorination, imidazopyridines (F-IMPY), One-pot synthesis}, issn = {2193-5807}, doi = {10.1002/ajoc.201900521}, author = {Said, Madhukar S. and Mishra, Ankita and Pandole, Satish and Nayak, Rashmi A. and Kumar, Pradeep and Gajbhiye, Jayant M.} } @article {46240, title = {Relativistic coupled-cluster investigation of parity (P) and time-reversal (T) symmetry violations in HgF}, journal = {Journal of Chemical Physics}, volume = {150}, year = {2019}, month = {FEB}, type = {Article}, abstract = {

We employ the Z-vector method in the four-component relativistic coupled-cluster framework to calculate the parity (P) and time-reversal (T) symmetry violating scalar-pseudoscalar nucleus-electron interaction constant (W-s), the effective electric field (E-eff) experienced by the unpaired electron, and the nuclear magnetic quadrupole moment-electron interaction constant (W-M) in the open-shell ground electronic state of HgF. The molecular frame dipole moment and the magnetic hyperfine structure (HFS) constant of the molecule are also calculated at the same level of theory. The outcome of our study is that HgF has a high value of E-eff (115.9 GV/cm), W-s (266.4 kHz), and W-M (3.59 x 10(33) Hz/e cm(2)), which shows that it can be a possible candidate for the search of new physics beyond the standard model. Our results are in good agreement with the available literature values. Furthermore, we investigate the effect of the basis set and the virtual energy functions on the computed properties. The role of the high-energy virtual spinors is found to be significant in the calculation of the HFS constant and the P,T-odd interaction coefficients. Published under license by AIP Publishing.

}, doi = {10.1063/1.5083000}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {46141, title = {Role of hydrogen bonding in cocrystals and coamorphous solids: indapamide as a case study}, journal = {Crystengcomm}, volume = {21}, year = {2019}, month = {APR }, pages = {2043-2048}, type = {Article}, abstract = {

The stronger sulfonamide-pyridine (SO2NH2 center dot center dot center dot N-Py) and sulfonamide-carboxamide (SO2NH2 center dot center dot center dot O = C-NH) hydrogen bonds direct the formation of cocrystals, while the weaker sulfonamide-amine (SO2NH2 center dot center dot center dot N-H) hydrogen bond results in coamorphous products. IDP-PIP and IDP-ARG coamorphous solids exhibit remarkable stability under accelerated conditions.

}, issn = {1466-8033}, doi = {10.1039/c8ce01075g}, author = {Allu, Suryanarayana and Suresh, Kuthuru and Bolla, Geetha and Mannava, M. K. Chaitanya and Nangia, Ashwini} } @article {45529, title = {Scalable microwave-assisted continuous flow synthesis of CuO nanoparticles and their thermal conductivity applications as nanofluids}, journal = {Advanced Powder Technology}, volume = {30}, year = {2019}, month = {JAN}, pages = {13-17}, type = {Article}, abstract = {

We have demonstrated the novel and scalable synthesis of CuO nanoparticles by an integration of microwave and flow synthesis. The shape and size of CuO nanoparticles were tuned by changing the concentration of copper precursor. The production rate of CuO nanoparticles was found to be 5 g/h with 70\% conversion of copper acetate into the CuO nanoparticles. The thermal conductivity of CuO nanofluid prepared in ethylene glycol showed linear enhancement with increase in the volume content of CuO nanoparticles produced in batch and flow reactors. (C) 2018 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

}, keywords = {Flow synthesis, Microwave, Nanofluids, Nanoparticles, scale-up, Thermal conductivity}, issn = {0921-8831}, doi = {10.1016/j.apt.2018.10.001}, author = {Nikam, Arun V. and Dadwal, Arun H.} } @article {46207, title = {Selective synthesis of dimethyl carbonate via transesterification of propylene carbonate with methanol catalyzed by bifunctional Li-Al Nano-composite}, journal = {Chemistryselect}, volume = {4}, year = {2019}, month = {AUG}, pages = {8574-8583}, type = {Article}, abstract = {

A series of binary mixed metal oxides (MMOs) were synthesized by combination of Mn+/Al3+ (Mn+= Li, Mg, Co, Ni, Zn) via co-precipitation method and screened for transesterification of propylene carbonate (PC) with methanol. The aim of this study was to understand the role of acid-base properties of MMOs on the activity and selectivity towards dimethyl carbonate (DMC) synthesis. The MMOs were characterized in detail by XRD, BET, TEM, NH3 and CO2-TPD techniques. Catalysts synthesized by various combination of Mn+/Al3+ showed different textural and surface properties and the strength of acid-base sites were also found to be significantly altered. These changes in physicochemical properties significantly affected the PC conversion and selectivity to DMC. Li+ incorporated in Al3+ showed the formation of octahedral alpha-LiAlO2 phase having more amounts of active sites (O2-) present on the edges and corner of the structure. This resulted in easy accessibility of active sites and higher activity compared to other catalysts screened. Furthermore the catalyst retained high activity and selectivity for six consecutive recycle experiments; which is highly desirable for large-scale application.

}, doi = { 10.1002/slct.201901621}, author = {Nivangune, Nayana and Kelkar, Ashutosh} } @article {46184, title = {Selective targeting of integrin alpha v beta 8 by a highly active cyclic peptide}, journal = {Journal of Medicinal Chemistry}, volume = {62}, year = {2019}, month = {FEB }, pages = {2024-2037}, type = {Article}, abstract = {

Integrins play important roles in physiological and pathophysiological processes. Among the RGD-recognizing integrin subtypes, the alpha v beta 8 receptor is emerging as an attractive target because of its involvement in various illnesses, such as autoimmune diseases, viral infections, and cancer. However, its functions have, so far, not been investigated in living subjects mainly because of the lack of a selective alpha v beta 8 ligand. Here, we report the design and potential medical applications of a cyclic octapeptide as the first highly selective small-molecule ligand for alpha v beta 8. Remarkably, this compound displays low nanomolar alpha v beta 8 binding affinity and a strong discriminating power of at least 2 orders of magnitude versus other RGD-recognizing integrins. Peptide functionalization with fluorescent or radioactive labels enables the selective imaging of alpha v beta 8-positive cells and tissues. This new probe will pave the way for detailed characterization of the distinct (patho)physiological role of this relatively unexplored integrin, providing a basis to fully exploit the potential of alpha v beta 8 as a target for molecular diagnostics and personalized therapy regimens.

}, issn = {0022-2623}, doi = {10.1021/acs.jmedchem.8b01588}, author = {Reichart, Florian and Maltsev, Oleg V. and Kapp, Tobias G. and Raeder, Andreas F. B. and Weinmueller, Michael and Marelli, Udaya Kiran and Notni, Johannes and Wurzer, Alexander and Beck, Roswitha and Wester, Hans Juergen and Steiger, Katja and Di Maro, Salvatore and Di Leva, Francesco Saverio and Marinelli, Luciana and Nieberler, Markus and Reuning, Ute and Schwaiger, Markus and Kessler, Horst} } @article {46077, title = {Self-assemblies of nucleolipid supramolecular synthons show unique self-sorting and cooperative assembling process}, journal = {Nanoscale}, volume = {11}, year = {2019}, month = {JUN }, pages = {11956-11966}, type = {Article}, abstract = {

The inherent control of the self-sorting and co-assembling process that has evolved in multi-component biological systems is not easy to emulate in vitro using synthetic supramolecular synthons. Here, using the basic component of nucleic acids and lipids, we describe a simple platform to build hierarchical assemblies of two component systems, which show an interesting self-sorting and co-assembling behavior. The assembling systems are made of a combination of amphiphilic purine and pyrimidine ribonucleoside-fatty acid conjugates (nucleolipids), which were prepared by coupling fatty acid acyl chains of different lengths at the 2 {\textquoteleft}-O- and 3 {\textquoteleft}-O-positions of the ribose sugar. Individually, the purine and pyrimidine nucleolipids adopt a distinct morphology, which either supports or does not support the gelation process. Interestingly, due to the subtle difference in the order of formation and stability of individual assemblies, different mixtures of supramolecular synthons and complementary ribonucleosides exhibit a cooperative and disruptive self-sorting and co-assembling behavior. A systematic morphological analysis combined with single crystal X-ray crystallography, powder X-ray diffraction (PXRD), NMR, CD, rheological and 3D X-ray microtomography studies provided insights into the mechanism of the self-sorting and co-assembling process. Taken together, this approach has enabled the construction of assemblies with unique higher ordered architectures and gels with remarkably enhanced mechanical strength that cannot be derived from the respective single component systems.

}, issn = {2040-3364}, doi = {10.1039/c9nr01863h}, author = {Nuthanakanti, Ashok and Walunj, Manisha B. and Torris, Arun and Badiger, Manohar V. and Srivatsan, Seergazhi G.} } @article {46432, title = {Silk fibroin-sodium dodecyl sulfate gelation: molecular, structural, and rheological insights}, journal = {Langmuir}, volume = {35}, year = {2019}, month = {NOV}, pages = {14870-14878}, type = {Article}, abstract = {

A gelling agent is necessary to accelerate sol to gel transition in an aqueous solution of silk fibroin (SF), which otherwise takes several days to complete. In this paper, we investigate the mechanism of gelation of Bornbyx mori SF by a model anionic surfactant, sodium dodecyl sulfate (SOS). Even though interactions between SDS and proteins have been extensively investigated, most of these studies have focused on globular proteins, which undergo denaturation. The interaction with a fibrous protein such as SF is different and results in an altered secondary structure leading to gelation. In this work, the concentration-dependent gelation process of the SF-SDS system is examined using rheology, SANS, FTIR, and NMR. We observed preferential binding of SDS to specific regions on the SF chain, which aids structural changes favoring beta-sheet formation. We propose a mechanism for the accelerated sol-gel transition in the SF-SDS system.

}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.9b02402}, author = {Hirlekar, Swarali and Ray, Debes and Aswal, Vinod K. and Prabhune, Asmita and Nisal, Anuya and Ravindranathan, Sapna} } @article {46097, title = {Solvothermal growth of PbBi2Se4 nano-flowers: a material for humidity sensor and photodetector applications}, journal = {Physica Status Solidi A-Applications and Materials Science}, volume = {216}, year = {2019}, month = {JUN}, pages = {1900065}, type = {Article}, abstract = {

In the present work, lead bismuth selenide (PbBi2Se4) nano-flowers are synthesized by using a simple solvothermal method. Humidity sensor and photodetector based on PbBi2Se4 nano-flowers are fabricated on indium tin oxide (ITO) substrates and their sensing properties are investigated. Formation of PbBi2Se4 is confirmed by XRD, EDS, and XPS whereas formation of nano-flowers is confirmed by SEM and TEM analysis. XRD analysis reveals the hexagonal crystal structure of PbBi2Se4 phase with a = b = 4.22 angstrom, and c= 17.42 angstrom. The surface morphology of PbBi2Se4 clearly shows the formation of well-organized flower-like nanostructures which closely resembles the shape of Dahlia. The elemental mapping of chemical constituents obtained from SEM-EDS analysis shows uniform distribution of chemical constituents for the Pb, Bi, and Se in PbBi2Se4 nano-flowers. The PbBi2Se4 nano-flowers based humidity sensor has a typical response time of approximate to 65s and recovery time of approximate to 75 s. In case of PbBi2Se4 nano-flowers-based photodetector, the response and recovery time are observed approximate to 121 and approximate to 123 s, respectively, under visible light illumination with photoresponsivity (5 x 10(-6)), photosensitivity (2.16\%), and quantum efficiency (1.5 x 10(4)). The obtained results demonstrate the potential applications of solvothermally grown PbBi2Se4 nano-flowers-based devices for humidity sensors and photodetectors. The ease of the present work is to develop novel material to obtain device quality humidity sensors and photodetectors.

}, keywords = {humidity sensor, PbBi2Se4, photodetector, XPS, XRD}, issn = {1862-6300}, doi = {10.1002/pssa.201900065}, author = {Aher, Rahul and Bhorde, Ajinkya and Nair, Shruthi and Borate, Haribhau and Pandharkar, Subhash and Naik, Dhirsing and Vairale, Priti and Karpe, Smita and Late, Dattatray and Prasad, Mohit and Jadkar, Sandesh} } @article {46002, title = {Stealth emulsion based on natural rubber latex, core-shell ferrofluid/carbon black in the S and X bands}, journal = {Nanotechnology}, volume = {30}, year = {2019}, month = {AUG }, pages = {315703}, type = {Article}, abstract = {

A lossy dielectric with an appropriate magnetic property is one of the requirements of a stealth material. The thickness of the absorber and the corresponding bandwidth of absorption are also other deciding factors that determine the choice of the material as microwave absorbers. A stable emulsion, which is lossy as well as magnetic, is promising, since it can be coated on surfaces with required thickness in the desired band. A magnetic nanofluidic emulsion serves the purpose. A microwave absorbing emulsion based on natural rubber latex with core-shell magnetic nanoparticles, based on superparamagnetic iron oxide nanoparticles (SPIONs), was developed. The effect of additives like carbon black on the bandwidth of absorption was also studied as a function of weight percentage of carbon black. The complex dielectric permittivity and magnetic permeability were evaluated using a vector network analyser in the S and X bands. Furthermore, these results were modelled using surface impedance equations. These investigations revealed that the incorporation of carbon black enhances the bandwidth of absorption and an emulsion with the required dielectric permittivity and magnetic permeability can be tailored for stealth applications.

}, keywords = {carbon black, core-shell nanoparticles, ferrofluid, microwave absorbing paint, natural rubber latex}, issn = {0957-4484}, doi = {10.1088/1361-6528/ab1194}, author = {Vinayasree, S. and Nair, Ajalesh Balachandran and Mani, Manoj and Archana, V. N. and Joseph, Rani and Mohanan, P. and Joy, P. A. and Anantharaman, M. R.} } @article {46151, title = {Structure-property relations in regenerated cellulose fibers: comparison of fibers manufactured using viscose and lyocell processes}, journal = {Cellulose}, volume = {26}, year = {2019}, month = {APR}, pages = {3655-3669}, type = {Article}, abstract = {

Regenerated cellulose fibers are produced using two industrially dominant technologies: the viscose and lyocell processes. Here, we compare commercially available fibers, prepared using the viscose and lyocell processes. Single fibers are subjected to a variety of mechanical deformations to obtain stress-strain, stress relaxation and stress recovery data. These are fitted to a phenomenological model, whose parameters are interpreted in terms of the fiber semicrystalline microstructure. This simple model does not incorporate the complexities of semicrystalline microstructure. Rather, it represents structure in a semicrystalline polymer fiber in terms of an elastic crystalline phase that coexists with a viscoelastic Voigt-like glassy amorphous phase. Lyocell fibers are characterized by higher values of crystalline modulus relative to viscose. Lyocell fibers also have a higher amorphous phase modulus and a wider relaxation spectrum than viscose, suggesting that amorphous and crystalline phases are dispersed in close connectivity in lyocell. Viscose and lyocell fibers exhibit qualitative similarities in their mechanical response. On stretching, there is a transition in the stress-strain curve from a low strain elastic response at a critical value of strain. This critical strain has been incorrectly attributed to yielding of the fiber. We establish that this critical value corresponds to an apparent yield. When subjected to strains higher than this apparent yield point, the fibers develop a memory of the mechanical deformation. This memory decays slowly, logarithmically with time and is lost over about a day as the fiber structure transitions back to the original as spun fiber. Finally, we demonstrate that on wetting the fibers with water, there is an increase in the apparent yield strain for viscose fibers, but not for lyocell. We interpret these results in terms of the semicrystalline microstructure of the fibers.

}, keywords = {mechanical properties, Model, Regenerated cellulose, Yielding}, issn = {0969-0239}, doi = {10.1007/s10570-019-02352-w}, author = {Sharma, Aakash and Nagarkar, Shailesh and Thakre, Shirish and Kumaraswamy, Guruswamy} } @article {45512, title = {Studies on nano composites of SPEEK/ethylene glycol/cellulose nanocrystals as promising proton exchange membranes}, journal = {Electrochimica Acta}, volume = {293}, year = {2019}, month = {JAN }, pages = {260-272}, type = {Article}, abstract = {

The present work deals with fabrication and characterisations of nano-composite membranes composed of sulfonated poly (ether ether ketone) (SPEEK) cross-linked and reinforced with ethylene glycol (EG) and cellulose nanocrystals (CNCs) respectively. The thin films of cross-linked composite membranes were prepared by solvent casting method and further analysed for physicochemical and electrochemical properties to execute their applicability as promising proton exchange membrane (PEM) in fuel cells. The process of cross-linking helps to improve the strength and dimensional stability of bare SPEEK membranes without compromising with conductivity. However, presence of CNCs further improves the strength and provides an effective pathway for the conduction of protons in membranes by interacting through their surface hydroxyl and sulfonic acid groups with ionic moieties of polymer matrix. All prepared composite membranes showed good oxidative and thermal stability along with good proton conductivity. The cross-linked SPEEK membranes with 4 wt\% loading of CNCs possess an appreciable proton conductivity of 0.186 S/cm at 95 degrees C and 95\% RH which is comparable to Nafion 117. From the view point of above studies, the prepared nano-composite can be described as promising proton exchange membrane for fuel cells. (c) 2018 Elsevier Ltd. All rights reserved.

}, keywords = {Cellulose nanocrystals, Cross-linked SPEEK, fuel cell, oxidative stability, proton conductivity}, issn = {0013-4686}, doi = {10.1016/j.electacta.2018.10.029}, author = {Bano, Saleheen and Negi, Yuvraj S. and Illathvalappil, Rajith and Kurungot, Sreekumar and Ramya, K.} } @article {46288, title = {Studies on the use of sodium polyacrylate (SPA) for low-salt animal skin preservation}, journal = {Environmental Science and Pollution Research}, volume = {26}, year = {2019}, month = {SEP}, pages = { 27100-27111}, type = {Article}, abstract = {

Salt-based preservation is practiced for decades in the leather industry because of its versatility, cost-effectiveness, and availability. The salt removed from the soaking process causes significant pollution including organic and elevated total dissolved solids (TDS). Hence, a low-salt skin preservation method using commercial sodium polyacrylate with a reduced quantity of sodium chloride aiming to retain leather properties and pollution reduction was the principal focus of the study. Commercial sodium polyacrylate initially characterized for water absorption capacity along with structural and functional properties is confirmed by NMR and IR spectroscopic techniques. In preliminary experiments, the process parameters attained optimized conditions of sodium polyacrylate (SPA) quantity (5\%), a minimal amount of salt (15\%), and contact time (4 h) required for skin preservation. Besides, reusability studies after SPA recovery (95\%) were applied to skins with an optimized quantity of SPA and salt subsequently stored for 15 days along with control (40\% salt). The results revealed that SPA with low salt aided an adequate curing efficiency with a substantial reduction (\> 65\%) of TDS and comparable physical and organoleptic properties on par with the conventional method. Overall, SPA supported low-salt skin preservation reduces pollutant load (TDS) caused due to using of 40\% sodium chloride in the conventional curing process.

}, doi = {10.1007/s11356-019-05871-y}, author = {Balasubramanian, Venkatakrishnan and Velappan, Brindha and Vijayan, Sandhya Kurvilla and Jabamani, Hepzibah and Nagarajan, Vedaraman and Victor, John Sundar and Ranganath, Suresha P. and Badiger, Manohar V. and Chinnaraj, Velappan kandukalpatti and Chellappa, Muralidharan} } @article {46069, title = {Supramolecular synthon hierarchy in sulfonamide cocrystals with syn-amides and N-oxides}, journal = {IUCRJ}, volume = {6}, year = {2019}, month = {JUL}, pages = {751-760}, type = {Article}, abstract = {

Sulfonamide drugs are well known antibacterial and antimicrobial molecules for pharmaceutical development. Building a library of suitable supramolecular synthons for the sulfonamide functional group and understanding their crystal structures with partner coformer molecules continues to be a challenge in crystal engineering. Although a few sulfonamide cocrystals with amides and N-oxides have been reported, the body of work on sulfonamide synthons is limited compared with those that have carboxylic acids and carboxamides. To address this structural gap, the present work is primarily focused on sulfonamide-lactam and sulfonamide-syn-amide synthons with drugs such as celecoxib, hydrochlorothiazide and furosemide. Furthermore, the electrostatic potential of previously reported cocrystals has been recalculated to show that the negative electrostatic potential on the lactam and syn-amide O atom is higher compared with the charge on carboxamide and pyridine N-oxide O atoms. The potential of sulfonamide molecules to form cocrystals with syn-amides and lactams are evaluated in terms of the electrostatic potential energy for the designed supramolecular synthons.

}, keywords = {cocrystals, crystal engineering, sulfonamides, supramolecular synthons, syn-amides}, issn = {2052-2525}, doi = {10.1107/S2052252519005037}, author = {Bolla, Geetha and Nangia, Ashwini} } @article {45606, title = {Synergetic combination of H2Zr1PW12O40 and Sn-Beta as potential solid acid catalyst for direct one-step transformation of glucose to ethyl levulinate, a biofuel additive}, journal = {Environmental Progress and Sustainable Energy}, year = {2019}, month = {FEB}, type = {Article}, abstract = {Ethyl levulinate (EL) has found wide applications as chemicals and biofuel additives. Efficient catalytic conversion of abundantly available glucose to ELs over solid acid catalyst having optimum Br{\o}nsted (B) and Lewis (L) acidity is highly appreciated. Present work demonstrated, direct one-step synthesis of EL from glucose over synergized Br{\o}nsted (H2Zr1PW12O40) and Lewis (Sn-Beta) acid catalyst. H2Zr1PW12O40 is prepared by exchanging H+ of tungstophosphoric acid (H3PW12O40-heteropolyacid) with Zr, improves the heterogeneity in polar medium by 50\%. The combination of a physical mixture of H2Zr1PW12O40 + Sn-Beta with 80:20 weight ratio was found to be optimum for the maximum EL yield formation of 54\% from glucose at 180{\textdegree}C for 3 h, which is probably the highest than reported over the heterogeneous catalyst in ethanol medium. An optimal combination of B and L catalyst and its ratio is found to be crucial for the direct transformation of glucose to EL in one step. The present study also explored that this combined physical mixture of H2Zr1PW12O40 + Sn-Beta can tolerate glucose concentration up to 30 g/L, which is probably the higher than reported. {\textcopyright} 2019 American Institute of Chemical Engineers Environ Prog, 2019}, doi = {10.1002/ep.13173}, author = {Mulik, N. and Niphadkar, P. and Bokade, V.} } @article {45480, title = {Synthesis, characterization, pharmacological and computational studies of 4, 5, 6, 7-tetrahydro-1, 3-benzothiazole incorporated azo dyes}, journal = {Journal of Molecular Structure}, volume = {1179}, year = {2019}, month = {MAR}, pages = {630-641}, type = {Article}, abstract = {

The present work describes the synthesis of five novel heterocyclic azo dyes (4a-4e) through conventional diazo-coupling reaction of 4, 5, 6, 7-tetrahydro-1, 3-benzothiazole with various coupling compounds at 0-5 degrees C. The chemical structures of the synthesized azo dyes were characterized by both theoretical and experimental techniques. All the synthesized molecules were evaluated for their antioxidant activity by two different techniques such as DPPH and FRAP. The results indicated that all the synthesized compounds proved to be potent antioxidants. The anti-mycobacterial activity of the azo dyes was tested against M. tuberculosis and the compounds 4a and 4e showed higher activity among the tested dyes. The DNA binding studies showed effective intercalation properties between the azo dyes and CT-DNA. Finally, the molecular docking studies indicated a possible interaction of the azo dyes with target receptor RpsA. (C) 2018 Elsevier B.V. All rights reserved.

}, keywords = {Azo dyes, Benzothiazole, CT-DNA, DFT, tuberculosis}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2018.11.041}, author = {Maliyappa, M. R. and Keshavayya, J. and Mallikarjuna, N. M. and Krishna, P. Murali and Shivakumara, N. and Sandeep, Telkar and Sailaja, Krishnamurty and Nazrulla, Mohammed Azeezulla} } @article {46417, title = {Synthesis of a 3D free standing crystalline NiSex matrix for electrochemical energy storage applications}, journal = {Dalton Transactions}, volume = {48}, year = {2019}, month = {DEC }, pages = {16873-16881}, type = {Article}, abstract = {

The electrochemical performance for energy storage of three-dimensional (3D) self-supported heterogeneous NiSex cubic-orthorhombic nanocrystals grown by a facile one-step chemical vapour deposition (CVD) approach on Ni foam substrates has been explored. NiSex shows a high specific capacitance of 1333 F g(-1) with ultra-high energy (105 W h kg(-1)) and power (54 kW kg(-1)) densities. Furthermore, by integrating the as-grown NiSex as the anode and reduced graphene oxide as the cathode, a hybrid super-capacitor (HSC) prototype with a coin cell configuration has been fabricated. The device shows better capacitance (40 F g(-1)) with high energy (22 W h kg(-1)) and power (5.8 kW kg(-1)) densities and robust cycling durability (similar to 88\% capacitance retention after 10 000 repeated cycles). For practical reliability of the as-fabricated HSC, a red LED has been illuminated by connecting it with two charged coin cells. These outstanding performances of the HSC prove to be promising for applications in high energy storage systems.

}, issn = {1477-9226}, doi = {10.1039/c9dt03150b}, author = {Dinara, Syed Mukulika and Samantara, Aneeya K. and Das, Jiban K. and Behera, J. N. and Nayak, Saroj K. and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {46281, title = {Synthesis of deuterated isopentyl pyrophosphates for chemo-enzymatic labelling methods: GC-EI-MS based 1,2-hydride shift in epicedrol biosynthesis}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {SEP}, pages = { 28258-28261}, type = {Article}, abstract = {

A sesquiterpene epicedrol cyclase mechanism was elucidated based on the gas chromatography coupled to electron impact mass spectrometry fragmentation data of deuterated (H-2) epicedrol analogues. The chemo-enzymatic method was applied for the specific synthesis of 8-position labelled farnesyl pyrophosphate and epicedrol. EI-MS fragmentation ions compared with non-labelled and isotopic mass shift fragments suggest that the H-2 of C6 migrates to the C7 position during the cyclization mechanism.

}, doi = {10.1039/c9ra00163h}, author = {Said, Madhukar S. and Navale, Govinda R. and Gajbhiye, Jayant M. and Shinde, Sandip S.} } @article {45605, title = {Telescoped sequence of exothermic and endothermic reactions in multistep flow synthesis}, journal = {Organic Process Research and Development}, year = {2019}, month = {JAN}, pages = {Article ASAP}, type = {Article}, abstract = {A multistep sequential flow synthesis of isopropyl phenol is demonstrated, involving 4-step exothermic, endothermic, and temperature sensitive reactions such as nitration, reduction, diazotization, and high temperature hydrolysis. Nitration of cumene with fuming nitric acid produces 2- and 4-nitrocumene which are converted into respective cumidines by the hydrogenation using Pd/Ni catalyst in H-cube with gravity separation. Hydrolysis of in situ generated diazonium salts in the boiling acidic conditions is carried out using integration of flow and microwave-assisted synthesis. 58\% of 4-isopropyl phenol was obtained. The sequential flow synthesis can be applied to synthesize other organic compounds involving this specific sequence of reactions.}, doi = {10.1021/acs.oprd.8b00008}, author = {Sharma, Y. and Nikam, A. V. and Kulkarni, A. A.} } @article {45482, title = {Thermally crosslinkable and chemically modifiable aromatic polyesters possessing pendant propargyloxy groups}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {57}, year = {2019}, month = {MAR}, pages = {588-597}, type = {Article}, abstract = {

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer-catalyzed interfacial polycondensation of 5-(propargyloxy)isophthaloyl chloride (P-IPC) and various compositions of P-IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77-1.33 dL/g and 43,600-118,000 g/mol, respectively, indicating the achievement of reasonably high-molecular weights. The 10\% weight loss temperatures of (co)polyesters were in the range 390-420 degrees C, demonstrating their good thermal stability. (Co)polyesters exhibited T-g in the range 146-170 degrees C and T-g values decreased with increase in mol \% incorporation of P-IPC. The study of non-isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post-modification of the selected copolyester with 1-(4-azidobutyl)pyrene, 9-(azidomethyl)anthracene, and azido-terminated poly(ethyleneglycol) monomethyl ether via copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction. FTIR and H-1 NMR spectra confirmed that click reaction was quantitative. (c) 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 588-597

}, keywords = {Click chemistry, crosslinking, modification, polyesters, propargyloxy, step-growth polymerization}, issn = {0887-624X}, doi = {10.1002/pola.29297}, author = {Verma, Savita and Maher, Deepak M. and Nagane, Samadhan S. and Tawade, Bhausaheb V. and Wadgaonkar, Prakash P.} } @article {46016, title = {Thiazolyl-pyrazole derivatives as potential antimycobacterial agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {29}, year = {2019}, month = {MAY}, pages = {1199-1202}, type = {Article}, abstract = {

Mycobacterium tuberculosis (Mtb) is an obligate aerobe that is capable of long-term persistence under conditions of low oxygen tension. A series of thiazolyl-pyrazole derivatives (6a-f, 7a-f, 8c, 8e) were screened for antimycobacterial activity against dormant M. tuberculosis H37Ra (D-MTB) and M. bovis BCG (D-BCG). Nine thiazolyl- pyrazole analogs, 6c, 6e, 7a, 7b, 7c, 7e, 7f, 8c and 8e exhibited promissing minimum inhibitory concentration (MIC) values (0.20-28.25 mu g/mL) against D-MTB and D-BCG strains of Mtb. Importantly, six compounds (7a, 7b, 7e, 7f, 8c and 8e) exhibited excellent antimycobacterial activity and low cytotoxicity at the maximum evaluated concentration of \> 250 mu g/mL. Finally, the promising antimycobacterial activity and lower cytotoxicity profile suggested that, these compounds could be further subjected for optimization and development as a lead, which could have the potential to treat tuberculosis.

}, keywords = {antimycobacterial activity, Cytotoxicity, Pyrazole, thiazoles}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2019.03.020}, author = {Takate, Sushma J. and Shinde, Abhijit D. and Karale, Bhausaheb K. and Akolkar, Hemant and Nawale, Laxman and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {45627, title = {Utilization of waste biomass for the synthesis of functionalizable support for covalent anchoring of active organo catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {7}, year = {2019}, month = {JAN}, pages = {3018{\textendash}3026}, type = {Article}, abstract = {A single step synthetic procedure for carbon microspheres from agricultural waste residue (sugarcane bagasse) by low-temperature hydrothermal carbonization using oxalic acid as a hydrating/dehydrating agent is developed. The FTIR and XPS spectroscopy analysis indicates the presence of -OH, -COOH, and C=O functional groups on the surfaces of carbon spheres. These functional groups of the carbon spheres were utilized as a novel route to anchor 3-aminopropyl-triethoxysilane and 3-(2-aminoethylamino)propyl)-trimethoxysilane via condensation of triethoxy/trimethoxy silanes for the synthesis of organo base supported on carbon catalysts. The catalytic activity of the obtained supported organo-base catalyst was demonstrated for C{\textendash}C bond forming (Henry) reaction. Among all prepared catalysts, 3-(2-aminoethylaminopropyl)-trimethoxysilane grafted in toluene showed high conversion (up to 100\%) of aldehydes with excellent selectivity toward β-nitrostyrene. The catalyst was reused five times without losing significant activity for the same reaction.}, author = {Doke, D. S. and Advani, J. H. and Naikwadi, D. R. and Gawande, M. B. and Walke, P. and Umbarkar, S. B. and Biradar, A. V.} } @article {46189, title = {Why the thin film form of a photocatalyst is better than the particulate form for direct solar-to-hydrogen conversion: a poor man{\textquoteright}s approach}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {FEB}, pages = {6094-6100}, type = {Article}, abstract = {

We demonstrated an easy method to improve the efficiency of photocatalysts by an order of magnitude by maximizing light absorption and charge carrier diffusion. Degussa titania (P25) and Pd/P25 composite photocatalyst thin films coated over regular glass plates were prepared and evaluated for solar hydrogen production in direct sunlight with aqueous methanol. It is worth noting that only UV light present in direct sunlight (similar to 4\%) was absorbed by the catalysts. The hydrogen production activities of catalysts were compared for thin film and particulate forms at 1 and 25 mg levels. The hydrogen yield values suggested that 1 mg thin film form of Pd/P25 provided 11-12 times higher activity than 25 mg powder form. Comparable light absorption throughout the entire thickness of photocatalyst device and better contact of nanostructures that enabled the charge diffusion and charge utilization at redox sites are the reasons for high efficiency. While solar cells require charge carriers to diffuse through long distances of microns, they are utilized locally in an ensemble of particles (of nanometres) for hydrogen generation in photocatalyst thin films; this concept was used effectively in the present work.

}, issn = {2046-2069}, doi = {10.1039/c8ra09982k}, author = {Nalajala, Naresh and Patra, Kshirodra Kumar and Bharad, Pradnya A. and Gopinath, Chinnakonda S.} } @article {46233, title = {Zinc ion interactions in a two-dimensional covalent organic framework based aqueous zinc ion battery}, journal = {Chemical Science}, year = {2019}, month = {AUG}, type = {Article}, abstract = {

The two-dimensional structural features of covalent organic frameworks (COFs) can promote the electrochemical storage of cations like H+, Li+, and Na+\ through both faradaic and non-faradaic processes. However, the electrochemical storage of cations like Zn2+\ ion is still unexplored although it bears a promising divalent charge. Herein, for the first time, we have utilized hydroquinone linked β-ketoenamine COF acting as a Zn2+\ anchor in an aqueous rechargeable zinc ion battery. The charge-storage mechanism comprises of an efficient reversible interlayer interaction of Zn2+\ ions with the functional moieties in the adjacent layers of COF (-182.0 kcal mol-1). Notably, due to the well-defined nanopores and structural organization, a constructed full cell, displays a discharge capacity as high as 276 mA h g-1\ at a current rate of 125 mA g-1.

}, doi = {10.1039/C9SC03052B}, author = {Mohammed, Abdul Khayum and Ghosh, Meena and Vijayakumar, Vidyanand and Halder, Arjun and Nurhuda, Maryam and Kumar, Sushil and Addicoat, Matthew and Kurungot, Sreekumar and Banerjee, Rahul} } @article {46800, title = {Agro-waste extracted cellulose supported silver phosphate nanostructures as a green photocatalyst for improved photodegradation of RhB dye and industrial fertilizer effluents}, journal = {Nanoscale Advances}, volume = {2}, year = {2020}, month = {JUL }, pages = {2870-2884}, type = {Article}, abstract = {

The efficiency and reusability of photocatalysts are the dominant factors for their pragmatic use. The visible light induced semiconductor silver phosphate is a superior photocatalyst effective under visible light but its stability is still an undiscussed issue. To overcome this stability issue in this present manuscript, eco-friendly agro-waste extracted cellulose supported silver phosphate nanostructures have been designed for the first time through a simple chemical process. At first, silver phosphate nanostructures were synthesized by the co-precipitation method. Then, different weights of cellulose were added to the silver nitrate solution to form cellulose supported silver phosphate nanostructures. The photodegradation efficiency for each weight ratio was examined in which the photocatalyst Ag-8 nanostructures showed a high rate (0.024 min(-1)) for degradation of Rhodamine B (RhB) using a low intensity tungsten bulb. Real sample analysis has also been carried out using this photocatalyst for the degradation of industrial fertilizer effluents. The degradation rate of all the nanostructures was found to be high in comparison to pristine silver phosphate as well as the extracted bare cellulose. The photocatalytic activity is enhanced because of the participation of cellulose as a support which makes an interface for silver phosphate and assists it in delaying the charge recombination period under visible light. To understand the photochemical reaction of electrons and holes, scavenger studies were also performed.

}, issn = {2516-0230}, doi = {10.1039/dOna00181c}, author = {Dwivedi, Pravin K. and Nair, Aathira and Mehare, Rupali S. and Chaturvedi, Vikash and Joshi, Kavita and Shelke, V. Manjusha} } @article {46998, title = {Alkyl-group-wrapped unsymmetrical squaraine dyes for dye-sensitized solar cells: branched alkyl chains modulate the aggregation of dyes and charge recombination processes}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JAN}, pages = {2555-2565}, type = {Article}, abstract = {

Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (V-oc) and short-circuit current (J(sc)), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both J(sc) and V-oc. Hence, tailoring the factors that govern the improvement of J(sc) and V-oc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp(3)-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance V-oc from 672 (SQS1) to 718 mV (SQS6) and J(sc) from 7.95 (SQS1) to 12.22 mA/cm(2) (SQS6), with the device efficiency ranging from 3.82\% to 6.23\% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1\% (V-oc = 715 mV, J(sc) = 13.05 mA/cm(2)) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I-3(-)) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.

}, keywords = {aggregation of dye, charge injection, charge recombination, Dye-sensitized solar cells, unsymmetrical squaraines}, issn = {1944-8244}, doi = {10.1021/acsami.9b19809}, author = {Singh, Ambarish Kumar and Kavungathodi, Munavvar Fairoos Mele and Nithyanandhan, Jayaraj} } @article {46617, title = {Anticancer potential of AgNPs synthesized using acinetobacter sp. and curcuma aromatica against HeLa cell lines: a comparative study}, journal = {Journal of Trace Elements in Medicine and Biology}, volume = {62}, year = {2020}, month = {DEC}, pages = {126630}, type = {Article}, abstract = {

Background: Biogenic nanoparticles are gaining attention due to their low toxicity and numerous biomedical applications. Present study aimed to compare the potential anticancer activity of two biogenic silver nanoparticles (bAgNPs and pAgNPs) against human cervical cancer cell lines (HeLa). Methods: bAgNPs were synthesized using Acinetobacter sp. whereas pAgNPs were synthesized using aqueous root extract of Curcuma aromatica. Effect of these nanoparticles on HeLa cells viability was studied using MTT assay and colony formation assay. Anticancer potential was determined using fluorescence microscopy and flow cytometry studies. Bio-compatibility studies were performed against peripheral blood mononuclear cells (PBMCs). Results: Both the nanoparticles showed 50 \% viability of peripheral blood mononuclear cells (PBMCs) when used at high concentration (200 mu g/mL). IC50 for bAgNPs and pAgNPs against HeLa cells were 17.4 and 14 mu g/mL respectively. Colony formation ability of Hela cells was reduced on treatment with both nanoparticles. Acridine orange and ethidium bromide staining demonstrated that bAgNPs were cytostatic whereas pAgNPs were apoptotic. JC-1 dye staining revealed that the mitochondrial membrane potential was affected on treatment with pAgNPs while it remained unchanged on bAgNPs treatment. Flow cytometry confirmed cell cycle arrest in HeLa cells on treatment with nanoparticles further leading to apoptosis in case of pAgNPs. About 77 and 58 \% HeLa cells were found in subG1 phase on treatment with bAgNPs and pAgNPs respectively. bAgNPs showed cytostatic effect on HeLa cells arresting the cell growth in subG1 phase, whereas, pAgNPs triggered death of HeLa cells through mitochondrial membrane potential impairment and apoptosis. Conclusion: Overall, bAgNPs and pAgNPs could be safe and showed potential to be used as anticancer nanoantibiotics against human cervical cancer cells.

}, keywords = {Acinetobacter sp., AgNPs, Anticancer, Curcuma aromatica, HeLa cells, PBMCs}, issn = {0946-672X}, doi = {10.1016/j.jtemb.2020.126630}, author = {Nadhe, Shradhda B. and Tawre, Madhumita S. and Agrawal, Sonia and Chopade, Balu A. and Sarkar, Dhiman and Pardesi, Karishma} } @article {47014, title = {Antidiabetic activity of dihydropyrimidine scaffolds and structural insight by single crystal x-ray studies}, journal = {Medicinal Chemistry}, volume = {16}, year = {2020}, month = {JAN}, pages = {996-1003}, type = {Article}, abstract = {

Background: This research project is designed to identify the anti-diabetic effects of the newly synthesized compounds to conclude the perspective of consuming one or more of these new synthetic compounds for diabetes management. Introduction: A series of dihydropyrimidine (DHPM) derivative bearing electron releasing and electron-withdrawing substituent{\textquoteright}s on phenyl ring (a-j) were synthesized and screened for antihyperglycemic(anti-diabetic) activity on streptozotocin (STZ) induced diabetic rat model. The newly synthesized compounds were characterized by using FT-IR, melting point, H-1 and C-13 NMR analysis. The crystal structure and supramolecular features were analyzed through single-crystal X-ray study. Anti-diabetic activity testing of newly prepared DHPM scaffolds was mainly based on their relative substituent on the phenyl ring along with urea and thiourea. Among the synthesized DHPM scaffold, the test compound c having chlorine group on phenyl ring at the ortho position to the hydropyrimidine ring with urea and methyl acetoacetate derivative shows moderate lowering of glucose level. However, the title compounds methyl 4-(4-hydroxy-3-methoxyphenyl)-6-methyl-2-thioxo-1,2,3,4-tetrahydropyrimi dine-5-carboxylate(g) and ethyl 4-(3-ethoxy-4-hydroxyphenyl)-6-methyl-2-oxo-1,2,3,4-tetrahydroprimidine- 5-carboxylate(h) having methoxy and ethoxy substituents on phenyl ring show significant hypoglycemic activity compared to the remaining compounds from the Scheme 1. Methods: The experimental rat models for the study were divided into 13 groups (n = 10); group 1 animals were treated with 0.5\% CMC (0.5mL) (vehicle); group 2 were considered the streptozotocin (STZ)/nicotinamide diabetic control group (DC) and untreated, group 3 diabetic animals were administered with gliclazide 50 mg/kg and act as a reference drug group. The remaining groups of the diabetic animals were administered with the newly synthesized dihydropyrimidine compounds in a single dose of 50 mg/kg orally using the oral gavage, daily for 7 days continuously. The blood glucose level was measured before and 72 hrs after nicotinamide-STZ injection, for confirmation of hyperglycemia and type 2 diabetes development. Results: Blood glucose levels were significantly (p\<0.05) reduced after treatment with these derivatives. The mean percentage reduction for gliclazide was 50\%, while that of synthesized compounds were approximately 36\%. Conclusion: Our result suggests that the synthesized new DEEM derivative containing alkoxy group on the phenyl ring shows a significant lowering of glucose level compared to other derivatives.

}, keywords = {anti-Diabetic, blood glucose levels, dihydropyrimidine, hypoglycemic activity, Streptozotocin, type 2 diabetes mellitus}, issn = {1573-4064}, doi = {10.2174/1573406416666191227123048}, author = {Bairagi, Keshab M. and Younis, Nancy S. and Emeka, Promise M. and Sangtani, Ekta and Gonnade, Rajesh G. and Venugopala, Katharigatta N. and Alwassil, I. Osama and Khalil, Hany E. and Nayak, Susanta K.} } @article {46880, title = {Aromatic amine passivated TiO2 for dye-sensitized solar cells (DSSC) with similar to 9.8\% efficiency}, journal = {Solar Energy}, volume = {201}, year = {2020}, month = {MAY }, pages = {965-971}, type = {Article}, abstract = {

In this work, the efficiency of dye-sensitized solar cells (DSSC) was improved by capping TiO2 with simple aromatic amines as a complexing agent. The aromatic amines, aniline and o-phenylenediamine capped TiO2 composites were synthesized via hydrothermal route and used as scattering layer in dye-sensitized solar cell (DSSC). Markedly, the maximum photo-conversion efficiency of 9.84\% was achieved with o-phenylenediamine capped-TiO2 composite as o-phenylenediamine capped-TiO2 showed higher reflectivity than the pristine TiO2, which is highly beneficial for reflecting the photons back to photoanode. In addition, the average life time of carriers in o-phenylenediamine capped-TiO2 was found to be 9.8 ms, which was 2 times higher than the pristine TiO2 (4.29 ms).

}, keywords = {Aromatic amines, DSSC, Electron injection, lifetime, Scattering layer, TiO2}, issn = {0038-092X}, doi = {10.1016/j.solener.2020.03.077}, author = {Kumar, T. R. Naveen and Yuvaraj, S. and Kavitha, P. and Sudhakar, Vediappan and Krishnamoorthy, Kothandam and Neppolian, B.} } @article {46742, title = {Biosensors: frontiers in rapid detection of COVID-19}, journal = {3 Biotech}, volume = {10}, year = {2020}, month = {AUG}, pages = {385}, type = {Review}, abstract = {

The rapid community-spread of novel human coronavirus 2019 (nCOVID19 or SARS-Cov2) and morbidity statistics has put forth an unprecedented urge for rapid diagnostics for quick and sensitive detection followed by contact tracing and containment strategies, especially when no vaccine or therapeutics are known. Currently, quantitative real-time polymerase chain reaction (qRT-PCR) is being used widely to detect COVID-19 from various types of biological specimens, which is time-consuming, labor-intensive and may not be rapidly deployable in remote or resource-limited settings. This might lead to hindrance in acquiring realistic data of infectivity and community spread of SARS-CoV-2 in the population. This review summarizes the existing status of current diagnostic methods, their possible limitations, and the advantages of biosensor-based diagnostics over the conventional ones for the detection of SARS-Cov-2. Novel biosensors used to detect RNA-viruses include CRISPR-Cas9 based paper strip, nucleic-acid based, aptamer-based, antigen-Au/Ag nanoparticles-based electrochemical biosensor, optical biosensor, and Surface Plasmon Resonance. These could be effective tools for rapid, authentic, portable, and more promising diagnosis in the current pandemic that has affected the world economies and humanity. Present challenges and future perspectives of developing robust biosensors devices for rapid, scalable, and sensitive detection and management of COVID-19 are presented in light of the test-test-test theme of the World Health Organization (WHO).

}, keywords = {Biosensors, COVID-19, Rapid detection, SARS-CoV-2}, issn = {2190-572X}, doi = {10.1007/s13205-020-02369-0}, author = {Samson, Rachel and Navale, Govinda R. and Dharne, Mahesh S.} } @article {46792, title = {Can half-a-monolayer of pt simulate activity like that of bulk pt? solar hydrogen activity demonstration with quasi-artificial leaf device}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JUL }, pages = {30420-30430}, type = {Article}, abstract = {

Pt is the best cocatalyst for hydrogen production. It is also well-known that the surface atomic layer is critical for catalysis. To minimize the Pt content as cocatalyst, herein we report on half-a-monolayer of Pt (0.5 theta(Pt)) decorated on earth-abundant Ni-Cu cocatalyst, which is integrated with a quasiartificial leaf (QuAL) device (TiO2/ZnS/CdS) and demonstrated for efficient solar hydrogen production. For the QuAL, TiO2 is sensitized with ZnS and CdS quantum dots by the SILAR method. The 0.5 theta(Pt)-decorated Ni-Cu shows an onset potential of 0.05 V vs reversible hydrogen electrode for the hydrogen evolution reaction, which is almost similar to that of commercial Pt/C. Photoactivity of the present QuAL device with either bulk Pt or 0.5 theta(Pt)-coated Ni-Cu cocatalyst is, surprisingly, equal. Our findings underscore that a fraction of a monolayer of Pt can enhance the activity of the cocatalyst, and it is worth exploring further for the high activity associated with atomic Pt and other noble metals.

}, keywords = {artificial leaf, nickel-copper, Photocatalysis, platinum, Solar hydrogen}, issn = {1944-8244}, doi = {10.1021/acsami.0c07431}, author = {Bajpai, Himanshu and Patra, Kshirodra Kumar and Ranjan, Ravi and Nalajala, Naresh and Reddy, Kasala Prabhakar and Gopinath, Chinnakonda S.} } @article {45546, title = {Carbon quantum dots functionalized agarose gel matrix for in solution detection of nonylphenol}, journal = {Environmental Technology}, volume = {41}, year = {2020}, month = {JAN}, pages = {322-328}, type = {Article}, abstract = {

Nonylphenol, an endocrine disrupter, is widely released to the aquatic environment, which is accumulative and extremely toxic to aquatic organisms. Here, we report a simple and cost-effective large-scale green synthesis of water-soluble highly fluorescent carbon quantum dots (CQDs) from marine biowaste (offshore washed algae) which gets quenched strongly in the presence of nonylphenol. These CQDs were around 20-40 nm in size and exhibit fluorescence constantly at 360 nm. The XRD profile depicted the interlayer spacing in the particle as 0.284 nm with a humped peak around 14 degrees showing the amorphous nature of the CQDs. FTIR spectra showed the stretching vibration of the hydroxyl groups (OH), asymmetric and symmetric stretching vibrations of the carboxylate anions (COO-). The fluorescence quantum yield of the CQDs is up to 68\% and nonyl phenol detection limit is less than 0.1 {\textmu}M. Furthermore, the CQDs were found to be stable at a wide pH range which makes it a suitable nonylphenol sensor for a variety of environmental samples. We functionalized these CQDs on an agarose gel matrix to develop a convenient sensor for the rapid detection of nonylphenol.

}, keywords = {Carbon quantum dots, endocrine disrupter, marine algae, nonylphenol, pollutant}, issn = {0959-3330}, doi = {10.1080/09593330.2018.1498133}, author = {Singh, S. and Nigam, P. and Pednekar, A. and Mukherjee, S. and Mishra, A.} } @article {47148, title = {Carbon supported size-controlled ru catalysts for selective levulinic acid hydrogenation into γ-valerolactone}, journal = {Journal of Siberian Federal University-Chemistry}, volume = {13}, year = {2020}, month = {JAN}, pages = {5-16}, type = {Article}, abstract = {

Liquid phase levulinic acid hydrogenation into γ-valerolactone in 1,4-dioxane as a solvent (165{\textdegree}C, 20 bar) was studied over a range of Ru monometallic catalysts using mesoporous carbon material Sibunit as a support. In addition to the catalyst prepared by impregnation with RuCl3.nH2O (0.1 M) followed by reduction in H2, size-controlled Ru(NPs)/Sibunit catalysts were synthesized by immobilization of polyvinylpyrrolidone (PVP) stabilized Ru nanoparticles (NPs) (dRu=2.4 nm). Сarbon supported colloidal Ru NPs were not studied earlier in levulinic acid hydrogenation. Activity of colloidal Ru(NPs)/Sibunit catalysts was found to be lower than that of impregnated Ru/Sibunit which could be attributed to hampering effect of PVP. However, colloidal Ru(NPs)/Sibunit purified by thermal treatment in air (180{\textdegree}C) followed by reduction in H2 (400{\textdegree}C) exhibited the same activity as impregnated one yielding 93\% γ-valerolactone at 100\% levulinic acid conversion. Applicability of supported PVP-assisted colloidal Ru NPs in hydrogenation of levulinic acid illustrates a potential to prepare more efficient catalysts for this reaction with a desired particle size. The catalysts were characterized by TEM, XRF, and N2 physisorption to compare their physical chemical properties.

}, doi = {10.17516/1998-2836-0166}, author = {Simakova, Irina L. and Demidova, Yuliya S. and Simonov, Mikhail N. and Niphadkar, Prashant S. and Bokade, Vijay V. and Devi, Nandini and Dhepe, Paresh L. and Murzin, Dmitry Yu} } @inbook {47833, title = {Chapter 18 - Advances in agrochemical remediation using nanoparticles}, booktitle = {Agrochemicals Detection, Treatment and Remediation}, year = {2020}, pages = {465-485}, publisher = {Butterworth-Heinemann}, organization = {Butterworth-Heinemann}, abstract = {Agrochemical pollution is a serious threat to environmental safety. Exposure to agrochemicals had deleterious health effects such as nervous system damage and cancer. Biological magnification of persistent agrochemicals also occurred. Hence, remediation approaches for agrochemical pollution must be a holistic approach, including environment and crop produces. The advent of nanotechnology helped to formulate highly efficient methods for the remediation of agrochemicals. High reactive surface area and very small packing space requirements made usage of nanoparticles as a popular agent in agrochemical remediation. Growing interests in surface-engineered nanoparticles promise complete removal of agrochemicals from the environment. Nanosorbents immobilized agrochemicals in the soil and helped microbial degradation of these compounds. However, many of the agrochemicals are persistent, and hence complete removal of these residues practice via photocatalysis. Photocatalytic degradation of persistent agrochemicals using bimetallic nanocomposites widely adopted. Large-scale environmental remediation of agrochemicals in soil, water, and agriculture products achieved via nanoparticles-based agrochemical cleaning systems such as thin-film fixed-bed reactors and nano-phytoremediation.}, keywords = {agrochemical cleaning systems, nanosorbents, Pesticides, Photocatalysis, surface engineering}, isbn = {978-0-08-103017-2}, doi = {10.1016/B978-0-08-103017-2.00018-0}, url = {https://www.sciencedirect.com/science/article/pii/B9780081030172000180}, author = {Abin Sebastian and Ashwini Nangia and Majeti Narasimha Vara Prasad}, editor = {Majeti Narasimha Vara Prasad} } @article {46844, title = {Characterisation of hyper tolerant Bacillus firmus L-148 for arsenic oxidation}, journal = {Environmental Pollution}, volume = {261}, year = {2020}, month = {JUN}, pages = {114124}, type = {Article}, abstract = {

Groundwater arsenic pollution causes millions of deaths worldwide. Long term natural and anthropogenic activities have increased arsenic levels in groundwater causing higher threats of arsenic exposure. Arsenic hyper-tolerant Firmicute Bacillus firmus L-148 was isolated from arsenic limiting Lonar lake soil, which tolerated more than 3 M arsenic and could oxidize 75 mM arsenite [As(III)] in 14 days. It oxidized As(III) in presence of heavy metals and had unusual pH optima at 9.2. B. firmus L-148 was studied at the biochemical, protein, genomic and transcript level for understanding its arsenic oxidizing machinery. The proteomic and transcript analysis exhibited the presence of ars and aio operon and supported the inducible nature of ars operon. Robust, hyper-tolerant, fast As(III) oxidizing, least nutrient requiring and multi-metal resistance qualities of the strain were used in microcosm studies for bioremediation. Artificial groundwater mimicking microcosm with 75 mM As(III) was developed. Modulation of carbon source, iron and multi metals affected growth and As(III) oxidation rate. The As(III) oxidation was recorded to be 77\% in 15 days in presence of sodium acetate and Fe ions. This microcosm study can be explored for bioremediation of arsenic contaminated water and followed by precipitation using other methods. (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {Arsenic hyper-tolerance, Lonar lake, Microcosm studies, Multi-metal resistance, Next generation sequencing}, issn = {0269-7491}, doi = {10.1016/j.envpol.2020.114124}, author = {Bagade, Aditi and Nandre, Vinod and Paul, Dhiraj and Patil, Yugendra and Sharma, Nisha and Giri, Ashok and Kodam, Kisan} } @article {46853, title = {Co@CoAl-layered double hydroxide/nitrogen-doped graphene composite catalyst for Al-H2O-based batteries: simultaneous hydrogen production and electricity generation}, journal = {ChemElectroChem}, volume = {7}, year = {2020}, month = {JUN}, pages = {2582-2591}, type = {Article}, abstract = {

Currently, the low energy efficiency of water electrolysis has compelled research toward the development of novel and energy-effective strategies for low-cost H-2 generation. In this context, we report a new concept of simultaneous H-2 and electricity generation by separating out the exothermic self-sustained Al-H2O reaction via electrochemistry. In addition, to catalyze the cathodic water reduction reaction, a single-pot and environmentally benign synthesis method is adopted. It results in the design of an electrocatalyst composed of Co@CoAl-layered double hydroxide core-shell nanospheres anchored over in situ generated N-doped graphene. Toward the water reduction reaction, the designed catalyst shows a negative voltage shift of mere around 113 mV with respect to the commercial Pt/C catalyst to reach the benchmark 10 mA cm(-2), with excellent stability of approximately 86 \% voltage retention after 12 h of continuous operation. The catalytic superiority of our material is evident when taken for battery-level testing; the fabricated device was able to deliver an average output voltage of around 0.95 V at a discharge current density of 5 mA cm(-2) along with H-2 liberation, which was also detected and quantified through gas chromatography.

}, keywords = {Al-H2O fuel cells, chronopotentiometry, core-shell structures, hydrogen evolution reaction, layered double hydroxides}, issn = {2196-0216}, doi = {10.1002/celc.202000502, Early Access Date = MAY 2020}, author = {Nadeema, Ayasha and Pandurang Kharabe, Geeta and Prakash Biswal, Dibya and Kurungot, Sreekumar} } @article {46824, title = {Conjunctive photoluminescence enhancement through plasmonic and photonic band-gap pathways in a chiral self-assembled system}, journal = {ChemPhotoChem}, volume = {4}, year = {2020}, month = {AUG}, pages = {582-591}, type = {Article}, abstract = {

We describe two parallel pathways for enhancing the intrinsic photoluminescence of an organic emitter dispersed in a liquid crystal (LC) medium. The pathways have independent origins: (i) Metal enhanced fluorescence (MEF) incorporating gold nanoparticles having an organic shell of pro-mesogenic cholesterol esters; and (ii) Matching the photonic band gap (PBG) due to the helical structure in a self-assembled chiral system with the excitation wavelength. This unprecedented combination of both pathways achieves a level of photoluminescence exceeding the sum of the contribution from the individual methods. This conjunctive protocol results in an overall enhancement by a factor of 37 between the emitter dispersed in a non-chiral LC and that appealing to both MEF and PBG pathways. Circular polarized luminescence measurements also show that this protocol helps in effective discrimination of chiral light achieving a large dissymmetry factor whose magnitude (+0.33) is comparable to the highest recorded to date. Electric field switching between two states is also shown to result in appreciable fluorescence modulation. Being generic in nature the protocol employed can be adapted to a variety of situations with the large magnitude as well the modulation level suitable for applications such as biosensors, various analyte detection, and other photonic devices.

}, keywords = {chirality, circularly polarized luminescence, liquid crystals, photonic band-gap, plasmonics}, issn = {2367-0932}, doi = {10.1002/cptc.202000077, Early Access Date = JUN 2020}, author = {Baral, Marlin and Krishna Prasad, S. and Bhat, Sachin A. and Nayak, Rashmi A. and Yelamaggad, C. V.} } @article {46963, title = {Continuous interfacial centrifugal separation and recovery of silver nanoparticles}, journal = {Chemical Engineering \& Technology}, volume = {43}, year = {2020}, month = {MAR}, pages = {582-592}, type = {Article}, abstract = {

Continuous-flow separation and recovery of silver nanoparticles (AgNPs) using an annular centrifugal extractor (ACE) is demonstrated. Separation was achieved at the liquid-liquid interface based on the balance between centrifugal force and the solubility of the capping agent. A mathematical model is presented to understand the mechanism in greater detail. The separation of poly(vinylpyrrolidone) (PVP)-coated AgNPs in an ACE using a strong immiscible solvent was performed. The material accumulated at the interface was separated periodically without discontinuing the operation. The method is also suitable for separation of large particles or 1D/2D nanostructures even employing a single annular centrifugal extractor. Stable AgNPs were selected for a detailed antimicrobial activity study.

}, keywords = {Annular centrifugal extractor, Antimicrobial activity, Continuous-flow separation, Liquid-liquid interface, silver nanoparticles}, issn = {0930-7516}, doi = {10.1002/ceat.201800722, Early Access Date = FEB 2020}, author = {Deshpande, Jaydeep B. and Navale, Govinda R. and Dharne, Mahesh S. and Kulkarni, Amol A.} } @article {46964, title = {Continuous time random walk concepts applied to extended mode coupling theory: a study of the Stokes? Einstein breakdown}, journal = {Journal of Physics-Condensed Matter}, volume = {32}, year = {2020}, month = {FEB}, pages = {064001}, type = {Article}, abstract = {

In an attempt to extend the mode coupling theory (MCT) to lower temperatures, some years back an Unified theory was proposed which within the MCT framework incorporated the activated dynamics via the random first order transition theory (RFOT). The theory successfully showed that there is hopping induced diffusive dynamics and the modified MCT coupled to the activated motion continues till low temperatures. Here we show that the theory although successful in describing other properties of supercooled liquids is unable to capture the Stokes?Einstein breakdown. We then show using continuous time random work (CTRW) formalism that the Unified theory is equivalent to a CTRW dynamics in presence of two waiting time distributions. It is known from earlier work on CTRW that in such cases the total dynamics is dominated by the fast motion. This explains the failure of the Unified theory in predicting the SE breakdown as both the structural relaxation and the diffusion process are described by the comparatively fast MCT like dynamics. The study also predicts that other forms of extended MCT with Markovian hopping kernel will face a similar issue. We next modify the Unified theory by applying the concept of renewal theory, usually used in CTRW models where the distribution has a long tail. According to this theory the first jump given by the persistent time is slower than the subsequent jumps given by the exchange time. We first show that for systems with two waiting time distributions even when both the distributions are exponential the persistent time is larger than the exchange time. We also identify the persistent time with the slower activated process. The extended Unified theory can now explain the SE breakdown. In this extended theory at low temperatures the structural relaxation is described by the activated dynamics whereas the diffusion is primarily determined by the MCT like dynamics leading to a decoupling between them. We also calculate a dynamic lengthscale from the wavenumber dependence of the relaxation time. We find that this dynamic length scale grows faster than the static length scale.

}, keywords = {continuous time random walk, mode coupling theory, Stokes?Einstein breakdown}, issn = {0953-8984}, doi = {10.1088/1361-648X/ab50d4}, author = {Nandi, Manoj Kumar and Bhattacharyya, Sarika Maitra} } @article {46859, title = {Critical organic modifier aliphatic tail length for the formation of poly(methyl methacrylate)-montmorillonite nanocomposites}, journal = {Polymer Engineering and Science}, volume = {60}, year = {2020}, month = {JUL}, pages = {1604-1617}, type = {Article}, abstract = {

In this article, we report the influence of organic modifier structure (alkyl chain length C8-C20, single vs ditallow) and thereby, the effect of hydrophobicity on the structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)-clay hybrids. Melt processed PMMA-clay hybrids were characterized using wide-angle X-ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The organoclays having an alkyl chain length of more than 12 CH2 groups resulted in the formation of nanocomposites. The glass transition temperature (T-g) of PMMA increased in the presence of clay. The mean-field lattice model was used to predict the free energy for nanocomposite formation, which showed a reasonable match with the experimental results and provided a general guideline for the proper selection of polymer and organoclay (ie, organic modifier) to obtain nanocomposite. Tensile modulus showed maximum improvement of 58\% for the nanocomposites compared to 9\% improvement for the composites. Tensile modulus increased with increases in the alkyl chain length of the organic modifier and clay loading. The level of improvement for the tensile properties of nanocomposites prepared from primary and secondary ammonium-modified clay is the same as that obtained with the commercial organoclays.

}, keywords = {hybrid, mechanical properties, Montmorillonite, Nanocomposites, organoclay, poly(methyl methacrylate)}, issn = {0032-3888}, doi = {10.1002/pen.25405, Early Access Date = MAY 2020}, author = {Tiwari, Rajkiran R. and Natarajan, Upendra} } @article {46876, title = {Cu-Ni bimetal integrated TiO2 thin film for enhanced solar hydrogen generation}, journal = {Solar RRL}, volume = {4}, year = {2020}, month = {MAY}, pages = {1900557}, type = {Article}, abstract = {

A series of non-noble Cu-Ni bimetallic catalysts is prepared with different molar proportions of metals. Of these bimetallic catalysts, 1 wt\% is subsequently integrated with titania P25. The catalysts are evaluated for solar hydrogen generation under 1 sun condition in both the powder and thin film forms. All the photocatalysts in the thin film exhibit an 8-24 times higher hydrogen yield (HY) compared with the corresponding particulate counterpart. The highest HY (41.7 mmol h(-1) g(-1)) is demonstrated for the photocatalyst Cu-Ni/TiO2 (CNT; 1:1 = Cu:Ni) in the thin film form, which is 24 times higher than that with its powder counterpart (1.75 mmol h(-1) g(-1)) and exceeds the performance of other Cu-Ni/TiO2 compositions. This enhanced activity in the thin film can be ascribed to improved absorption of visible light and an effective separation of photogenerated charge carriers at the interface of Cu-Ni/TiO2 leading to better charge carrier utilization.

}, keywords = {bimetals, energy conversion, Hydrogen, Photocatalysis, solar energy}, issn = {2367-198X}, doi = {10.1002/solr.201900557}, author = {Tudu, Bijoy and Nalajala, Naresh and Saikia, Pranjal and Gopinath, Chinnakonda S.} } @article {47006, title = {Dioxolanone-anchored poly(allyl ether)-based cross-linked dual-salt polymer electrolytes for high-voltage lithium metal batteries}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JAN }, pages = {567-579}, type = {Article}, abstract = {

Novel cross-linked polymer electrolytes (XPEs) are synthesized by free-radical copolymerization induced by ultraviolet (UV)-light irradiation of a reactive solution, which is composed of a difunctional poly(ethylene glycol) diallyl ether oligomer (PEGDAE), a monofunctional reactive diluent 4-vinyl-1,3-dioxolan-2-one (VEC), and a stock solution containing lithium salt (lithium bis(trifluoromethanesulfonyl)imide, LiTFSI) in a carbonate-free nonvolatile plasticizer, poly(ethylene glycol) dimethyl ether (PEGDME). The resulting polymer matrix can be represented as a linear polyethylene chain functionalized with cyclic carbonate (dioxolanone) moieties and cross-linked by ethylene oxide units. A series of XPEs are prepared by varying the [O]/[Li] ratio (24 to 3) of the stock solution and thoroughly characterized using physicochemical (thermogravimetric analysis-mass spectrometry, differential scanning calorimetry, NMR, etc.) and electrochemical techniques. In addition, quantum chemical calculations are performed to elucidate the correlation between the electrochemical oxidation potential and the lithium ion-ethylene oxide coordination in the stock solution. Later, lithium bis(fluorosulfonyl)imide (LiFSI) salt is incorporated into the electrolyte system to produce a dual-salt XPE that exhibits improved electrochemical performance, a stable interface against lithium metal, and enhanced physical and chemical characteristics to be employed against high-voltage cathodes. The XPE membranes demonstrated excellent resistance against lithium dendrite growth even after reversibly plating and stripping lithium ions for more than 1000 h with a total capacity of 0.5 mAh cm(-2). Finally, the XPE films are assembled in a lab-scale lithium metal battery configuration by using carbon-coated LiFePO4 (LFP) or LiNi0.8Co0.15Al0.05O2 (NCA) as a cathode and galvanostatically cycled at 20, 40, and 60 degrees C. Remarkably, at 20 degrees C, the NCA-based lithium metal cells displayed excellent cycling stability and good capacity retention (\>50\%) even after 1000 cycles.

}, keywords = {cross-linked polymer electrolyte, dual-salt electrolyte, high-voltage cathode, lithium metal battery, solvent-free photopolymerization}, issn = {1944-8244}, doi = {10.1021/acsami.9b16348}, author = {Vijayakumar, Vidyanand and Diddens, Diddo and Heuer, Andreas and Kurungot, Sreekumar and Winter, Martin and Nair, Jijeesh Ravi} } @article {46615, title = {Effect of tert-alcohol functional imidazolium salts on oligomerization and fibrillization of amyloid beta (1-42) peptide}, journal = {Biophysical Chemistry}, volume = {267}, year = {2020}, month = {DEC}, pages = {106480}, type = {Article}, abstract = {

Imidazolium based IL{\textquoteright}s has gained vast interest in developing biological applications. Oligomerization and fibrillization of amyloid beta (1-42) peptide are mainly responsible for the extra-neuronal deposition of amyloid fibrils in neurodegenerative disorders like Alzheimer{\textquoteright}s disease (AD). Here, we report an effect of tert-BuOH-functional imidazolium ILs on oligomerization and fibrillization of amyloid beta (1-42) Peptide in vitro. In this study, a series of these [alkyl-(t)OHim][OMs] ILs with methyl sulphonate counter anion by varying alkyl chains were used. Among the seven protic ILs, four showed strong binding and inhibition activity for the formation of amyloid beta (1-42) aggregation by using Thioflavin T fluorescence binding assay. The secondary structural analysis of the peptide, pre-incubated with active ILs shows the loss of ordered beta-sheet amyloid structure. The longer alkyl chain ILs showed that an increased in amyloid binding and hence an inhibition effect on amyloid aggregation was enhanced. Thus, we propose that ILs could be presented as potential candidates for therapeutic intervention against Alzheimer{\textquoteright}s disease (AD).

}, keywords = {Aggregation, Amyloid beta (1-42) peptide, Biofilm inhibitor, Imidazolium ionic liquid}, issn = {0301-4622}, doi = {10.1016/j.bpc.2020.106480}, author = {Said, Madhukar S. and Navale, Govinda R. and Yadav, Ashok and Khonde, Nilesh and Shinde, Sandip S. and Jha, Anjali} } @article {46767, title = {Efficacy of clay catalysts for the dehydration of fructose to 5-hydroxymethyl furfural in biphasic medium}, journal = {Journal of Porous Materials}, volume = {27}, year = {2020}, month = {DEC}, pages = {1691-1700}, type = {Article}, abstract = {

5-Hydroxymethyl furfural (HMF) is one of the important platform chemical obtained from C6 sugars derived from biomass. The efficiency of montmorillonite clay catalysts (K-10, K-20, K-30, and Al pillared clay) has been systematically explored for the synthesis of HMF through dehydration of fructose in a biphasic solvent system. The catalysts were characterized by XRD, N(2)sorption,Al-27 MAS NMR,Si-29 NMR and FT-IR of chemisorbed pyridine. Acid treated K-10 catalyst was found to be the best among the clay catalysts tested. Various reaction parameters such as reaction temperature, catalyst content, solvent were optimized for achieving better yield of HMF. Under optimized reaction conditions, K-10 catalyst affords 80 mol\% fructose conversion with HMF yield of 61 mol\%. Insight into the type of acid sites essential for such cascade reactions has been furnished. Utilization of clay catalysts for HMF production will be beneficial to improve overall economics for the production of platform chemicals like HMF from biomass-derived raw materials.

}, keywords = {5-hydroxymethyl furfural, Acidity, Clays, fructose, Insights}, issn = {1380-2224}, doi = {10.1007/s10934-020-00943-8, Early Access Date = JUL 2020}, author = {Lucas, Nishita and Nagpure, Atul S. and Gurrala, Lakshmiprasad and Gogoi, Pranjal and Chilukuri, Satyanarayana} } @article {46641, title = {Electronic structure parameter of nuclear magnetic quadrupole moment interaction in metal monofluorides}, journal = {Journal of Chemical Physics}, volume = {153}, year = {2020}, month = {NOV}, pages = {184306}, type = {Article}, abstract = {

The electronic structure parameter (W-M) of the nuclear magnetic quadrupole moment (MQM) interaction in numerous open-shell metal monofluorides (viz., MgF, CaF, SrF, BaF, RaF, and PbF) is computed in the fully relativistic coupled-cluster framework. The electron-correlation effects are found to be very important for the precise calculation of W-M in the studied molecular systems. The molecular MQM interaction parameter scales nearly as Z(2) in the alkaline earth metal monofluorides, where Z is the nuclear charge of metal. Our study identifies (RaF)-Ra-223 as a good candidate for the experimental search of the nuclear MQM, which can help unravel the physics beyond the standard model in the hadron sector of matter.

}, issn = {0021-9606}, doi = {10.1063/5.0028669}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {46900, title = {Electrospun fibers and sorbents as a possible basis for effective composite wound dressings}, journal = {Micromachines}, volume = {11}, year = {2020}, month = {APR}, pages = {441}, type = {Article}, abstract = {

Skin burns and ulcers are considered hard-to-heal wounds due to their high infection risk. For this reason, designing new options for wound dressings is a growing need. The objective of this work is to investigate the properties of poly (epsilon-caprolactone)/poly (vinyl-pyrrolidone) (PCL/PVP) microfibers produced via electrospinning along with sorbents loaded with Argovit (TM) silver nanoparticles (Ag-Si/Al2O3) as constituent components for composite wound dressings. The physicochemical properties of the fibers and sorbents were characterized using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The mechanical properties of the fibers were also evaluated. The results of this work showed that the tested fibrous scaffolds have melting temperatures suitable for wound dressings design (58-60 degrees C). In addition, they demonstrated to be stable even after seven days in physiological solution, showing no macroscopic damage due to PVP release at the microscopic scale. Pelletized sorbents with the higher particle size demonstrated to have the best water uptake capabilities. Both, fibers and sorbents showed antimicrobial activity against Gram-negative bacteria Pseudomona aeruginosa and Escherichia coli, Gram-positive Staphylococcus aureus and the fungus Candida albicans. The best physicochemical properties were obtained with a scaffold produced with a PCL/PVP ratio of 85:15, this polymeric scaffold demonstrated the most antimicrobial activity without affecting the cell viability of human fibroblast. Pelletized Ag/Si-Al2O3-3 sorbent possessed the best water uptake capability and the higher antimicrobial activity, over time between all the sorbents tested. The combination of PCL/PVP 85:15 microfibers with the chosen Ag/Si-Al2O3-3 sorbent will be used in the following work for creation of wound dressings possessing exudate retention, biocompatibility and antimicrobial activity.

}, keywords = {electrospinning, poly (epsilon-caprolactone), poly (vinyl pyrrolidone), silver sorbents, wound dressings}, doi = {10.3390/mi11040441}, author = {Saul Alvarez-Suarez, Alan and Dastager, Syed G. and Bogdanchikova, Nina and Grande, Daniel and Pestryakov, Alexey and Carlos Garcia-Ramos, Juan and Lizeth Perez-Gonzalez, Graciela and Juarez-Moreno, Karla and Toledano-Magana, Yanis and Smolentseva, Elena and Antonio Paz-Gonzalez, Juan and Popova, Tatiana and Rachkovskaya, Lyubov and Nimaev, Vadim and Kotlyarova, Anastasia and Korolev, Maksim and Letyagin, Andrey and Jesus Villarreal-Gomez, Luis} } @article {46851, title = {Enantioselective separation using chiral amino acid functionalized polyfluorene coated on mesoporous anodic aluminum oxide membranes}, journal = {Analytical Chemistry}, volume = {92}, year = {2020}, month = {MAY }, pages = {6850-6857}, type = {Article}, abstract = {

Homochiral mesoporous anodic aluminum oxide membranes (AAO) were prepared by coating protected chiral D/L aspartic acid appended polyfluorene in the pores. These chiral AAO membranes successfully demonstrated enantioselective recognition and separation of a range of amino acids from their aqueous racemic mixture by simple filtration. Enantioselective separation was achieved by selective adsorption of one enantiomer from the aqueous racemic mixture into the chiral pores of the AAO membrane leaving the filtrate enriched with the other enantiomer. Extraction and quantification of the adsorbed amino acid (glutamic acid) demonstrated that 1 mg of homochiral polyfluorene could effectively extract about 3.5 mg of glutamic acid with 95\% enantiomeric excess in 24 h. This is one of the highest enantiomeric excesses (ee \%) and yields reported so far in the literature for a racemic mixture of glutamic acid. The pore size of the AAO membrane influenced the efficiency of separation with a reduction in pore size from 200 to 20 nm leading to reduced ee \% (similar to 95\% to similar to 28\%). These results raise the possibility for a facile method to carry out enantioselective separation.

}, issn = {0003-2700}, doi = {10.1021/acs.analchem.9b04699}, author = {Nikam, Shrikant B. and Asha, S. K.} } @article {46989, title = {Enzymatic and non-enzymatic detoxification of reactive carbonyl compounds improves the oxidative stress tolerance in cucumber, tobacco and rice seedlings}, journal = {Journal of Plant Growth Regulation}, volume = {39}, year = {2020}, month = {SEP}, pages = {1359-1372}, type = {Article}, abstract = {

Detoxification of reactive carbonyl compounds (RCC) is crucial to sustain cellular activity to improve plant growth and development. Seedling growth is highly affected by accumulation of RCC under stress. We report non-enzymatic, enzymatic mechanisms of detoxification of RCC in the cucumber, tobacco and rice seedling systems exposed to glucose, NaCl, methyl viologen (MV) induced oxidative stress. The cucumber seedlings exposed to carbonyl stress had higher levels of malondialdehyde (MDA), protein carbonyls (PCs) and advanced glycation end-product N-carboxymethyl-lysine (AGE-CML) that negatively affected the seedling growth. The overexpression of enzyme encoding aldo-keto reductase-1 (AKR1) in tobacco and rice showed detoxification of RCC, MDA and methylglyoxal (MG) with improved seedling growth under glucose, NaCl and MV-induced oxidative stress. Further, small molecules like acetylsalicylic acid (ASA), aminoguanidine (AG), carnosine (Car), curcumin (Cur) and pyridoxamine (PM) showed detoxification of RCC non-enzymatically and rescued the cucumber seedling growth from glucose, NaCl and MV-stress. In autotrophically grown rice seedlings these molecules substantially improved seedling growth under MV-induced oxidative stress. Seedlings treated with the small molecules sustained higher guaiacol peroxidase (GPX) enzyme activity signifying the role of small molecules in reducing carbonyl stress-induced protein inactivation and AGE-CML protein modifications. The results showed that besides enzymatic detoxification of RCC, the small molecules also could reduce cytotoxic effect of RCC under stress. The study demonstrates that small molecules are attractive compounds to improve the seedling growth under stress conditions.

}, keywords = {Oxidative stress, plant growth, Reactive carbonyl scavengers, Seed germination, small molecules}, issn = {0721-7595}, doi = {10.1007/s00344-020-10072-w, Early Access Date = JAN 2020}, author = {Nareshkumar, Ambekar and Subbarao, Sindhu and Vennapusa, Amarnatha Reddy and Ashwin, Vargheese and Banarjee, Reema and Kulkarni, Mahesh J. and Ramu, Vemanna S. and Udayakumar, Makarla} } @article {46981, title = {Epoxy functionalized polymer grafted magnetic nanoparticles by facile surface initiated polymerization for immobilization studies of Candida Antarctica lipase B}, journal = {Reactive \& Functional Polymers}, volume = {147}, year = {2020}, month = {FEB}, pages = {104454}, type = {Article}, abstract = {

Immobilization of Candida Antarctica lipase B (Cal-B) was done on the epoxy functionalized polymer (EFP) grafted magnetic nanoparticles (MNPs) via covalent attachment with the active epoxy groups. The EFP brushes were grafted on iron-oxide based MNPs by a facile surface-initiated atom transfer radical polymerization (ATRP) using activators generated by electron transfer (AGET) of glycidyl methacrylate (GMA). Each step of the surface modification, polymer grafting, and enzyme immobilization process on the polymer grafted MNPs was studied using Fourier transform infrared spectroscopy (FTIR). A thermogravimetric analysis (TGA) calculated the amount of engineered organic components, a transmission electron microscopy (TEM) visualized the core-shell formation of the MNPs, and a vibrating sample magnetometer (VSM) validated their magnetic properties at various modification stages. The lipase immobilization efficiency was described as a function of immobilization time, as well as, enzyme amount. The activity was characterized within a range of pH, temperature, kinetic parameters, resusability and storage stability, for both the free and immoblized Cal-B enzyme. The results of this study suggested that poly(GMA) grafted MNPs can be successfully used for the immobilization of Cal-B with improved efficiencies compared to those obtained with free soluble lipase. The reported enzyme immobilization method appears to be reproducible and scalable for industrial production.

}, keywords = {Cal-B enzymes, enzymes, Immoblization, Magnetic nanoparticles}, issn = {1381-5148}, doi = {10.1016/j.reactfunctpolym.2019.104454}, author = {Afzal, Haq Asif and Ghorpade, Ravindra V. and Thorve, Asmita K. and Nagaraja, Sreeharsha and Al-Dhubiab, Bandar E. and Meravanige, Girish and Rasool, Sahibzada Tasleem and Roopashree, Teeka S.} } @article {46621, title = {Essential gene prediction using limited gene essentiality information-an integrative semi-supervised machine learning strategy}, journal = {PloS One}, volume = {15}, year = {2020}, month = {NOV }, pages = {e0242943}, type = {Article}, abstract = {

Essential gene prediction helps to find minimal genes indispensable for the survival of any organism. Machine learning (ML) algorithms have been useful for the prediction of gene essentiality. However, currently available ML pipelines perform poorly for organisms with limited experimental data. The objective is the development of a new ML pipeline to help in the annotation of essential genes of less explored disease-causing organisms for which minimal experimental data is available. The proposed strategy combines unsupervised feature selection technique, dimension reduction using the Kamada-Kawai algorithm, and semi-supervised ML algorithm employing Laplacian Support Vector Machine (LapSVM) for prediction of essential and non-essential genes from genome-scale metabolic networks using very limited labeled dataset. A novel scoring technique, Semi-Supervised Model Selection Score, equivalent to area under the ROC curve (auROC), has been proposed for the selection of the best model when supervised performance metrics calculation is difficult due to lack of data. The unsupervised feature selection followed by dimension reduction helped to observe a distinct circular pattern in the clustering of essential and non-essential genes. LapSVM then created a curve that dissected this circle for the classification and prediction of essential genes with high accuracy (auROC \> 0.85) even with 1\% labeled data for model training. After successful validation of this ML pipeline on both Eukaryotes and Prokaryotes that show high accuracy even when the labeled dataset is very limited, this strategy is used for the prediction of essential genes of organisms with inadequate experimentally known data, such as Leishmania sp. Using a graph-based semi-supervised machine learning scheme, a novel integrative approach has been proposed for essential gene prediction that shows universality in application to both Prokaryotes and Eukaryotes with limited labeled data. The essential genes predicted using the pipeline provide an important lead for the prediction of gene essentiality and identification of novel therapeutic targets for antibiotic and vaccine development against disease-causing parasites.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0242943}, author = {Nandi, Sutanu and Ganguli, Piyali and Sarkar, Ram Rup} } @article {47325, title = {Evaluation of uttroside B, a saponin from Solanum nigrum Linn, as a promising chemotherapeutic agent against hepatocellular carcinoma (vol 6, 36318, 2016)}, journal = {Scientific Reports}, volume = {10}, year = {2020}, month = {NOV}, pages = {20431}, type = {Correction}, abstract = {

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

}, issn = {2045-2322}, doi = {10.1038/s41598-020-77440-0}, author = {Nath, Lekshmi R. and Gorantla, Jaggaiah N. and Thulasidasan, Arun Kumar T. and Vijayakurup, Vinod and Shah, Shabna and Anwer, Shabna and Joseph, Sophia M. and Antony, Jayesh and Veena, Kollery Suresh and Sundaram, Sankar and Marelli, Udaya K. and Lankalapalli, Ravi S. and Anto, Ruby John} } @article {46801, title = {Experimental and theoretical investigations of the effect of heteroatom-doped carbon microsphere supports on the stability and storage capacity of nano-Co3O4 conversion anodes for application in lithium-ion batteries}, journal = {Nanoscale Advances}, volume = {2}, year = {2020}, month = {JUL }, pages = {2914-2924}, type = {Article}, abstract = {

Conversion-type anode materials have been intensely studied for application in Li-ion batteries (LIBs) due to their potentially higher capacities than current graphite-based anodes. This work reports the development of a high-capacity and stable anode from a nanocomposite of N and S co-doped carbon spheres (NSCSs) with Co3O4 (NSCS-Co3O4). A hydrothermal reaction of saccharose withl-cysteine was carried out, followed by its carbonization. CSs when used as supports for conversion-type materials provide efficient electron/ion transfer channels, enhancing the overall electrochemical performance of the electrodes. Additionally, the heteroatoms doped in a carbon matrix alter the electronic properties, often increasing the reactivity of the carbon surface, and they are reported to be effective for anchoring metal oxide nanoparticles. Consequently, the NSCS-Co3O4 nanocomposites developed in this work exhibit enhanced and stable reversible specific capacity over several cycles. Stable cycling behavior was observed at 1 A g(-1)with 1285 mA h g(-1) of specific capacity retained after 350 cycles along with more than 99\% of coulombic efficiency. This material shows excellent rate capability with a specific capacity of 745 mA h g(-1) retained even at a high current density of 5 A g(-1). Detailed DFT-based calculations revealed the role of doped supports in controlling the volume expansion upon lithiation.

}, issn = {2516-0230}, doi = {10.1039/dOna00261e}, author = {Dwivedi, Pravin K. and Nair, Aathira and Mehare, Rupali S. and Chaturvedi, Vikash and Joshi, Kavita and Shelke, V, Manjusha} } @article {46911, title = {Fe3+ stabilized 3D cross-linked glycine-melamine formaldehyde networks as precursor for highly efficient oxygen reduction catalyst in alkaline media}, journal = {Materials Letters}, volume = {264}, year = {2020}, month = {APR 1}, pages = {127365}, type = {Article}, abstract = {

Development of inexpensive oxygen reduction electrocatalyst with high activity and durability is very important. Herein, iron carbide encapsulated pod-like graphitic carbon structures were prepared by simple pyrolysis involving Fe-glycine complex integrated melamine-formaldehyde resin precursor. The best catalyst among those studied, Fe-Gly 2 MF-C, possessing high degree of graphitization (I-D /I-G = 0.99) and enhanced specific surface area (205 m(2)/g) exhibited the highest ORR activity with a half-wave potential of 0.80 V in alkaline medium through the four-electron reduction pathway. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {fuel cell, Graphitic carbon alloy, Iron carbide, ORR}, issn = {0167-577X}, doi = {10.1016/j.matlet.2020.127365}, author = {Kottarathil, Shijina and Illathvalappil, Rajith and Nisa, S. and Sailaja, G. S. and Mohamed, Peer A. and Nair, Balagopal N. and Gopinathan, Anilkumar M. and Kurungot, Sreekumar and Yamaguchi, Takeo and Hareesh, U. S.} } @article {46689, title = {Five concomitant polymorphs of a green fluorescent protein chromophore (GFPc) analogue: understanding variations in photoluminescence with pi-stacking interactions}, journal = {Acta Crystallographica Section B-Structural Science Crystal Engineering and Materials}, volume = {76}, year = {2020}, month = {OCT}, pages = {850-864}, type = {Article}, abstract = {

The synthetically modified green fluorescent protein chromophore analogue 3,4,5-trimethoxybenzylidene imidazolinone (1) yielded five polymorphs (I, II, III, IV, V) concomitantly irrespective of the solvent used for crystallization. The pentamorphic modification of 1 is solely due to the interplay of iso-energetic weak intermolecular interactions in molecular associations as well as the conformational flexibility offered by a C-C single bond, which connects the electron-deficient moiety imidazolinone with the electron-rich trimethoxybenzylidene group. A common structural feature observed in all the polymorphs is the formation of a {\textquoteleft}zero-dimensional{\textquoteright} centrosymmetric dimeric unit through a short and linear C-H center dot center dot center dot O hydrogen bond engaging phenyl C-H and imidazolinone carbonyl oxygen. However, the networking of these dimeric units showed a subtle difference in all the polymorphs. The 2D isostructurality was observed between polymorphs I, II and III, while the other two polymorphs IV and V revealed only {\textquoteleft}zero-dimensional{\textquoteright} isostructurality. The different fluorescence emissions of Form I (blue) and Forms II to V (yellow) were attributed to the differences in pi-stacking interactions. It shows that one can modulate the photophysical properties of these smart materials by slightly altering their crystal structure. Such an approach will aid in developing new multi-colour organic fluorescent materials of varying crystal structures for live-cell imaging and fluorescent sensing applications.

}, keywords = {green fluorescent protein, hydrogen bonds, isostructurality, photoluminescence, pi-stacking, Polymorphs}, doi = {10.1107/S2052520620010343}, author = {Mali, Bhupendra P. and Dash, Soumya Ranjan and Nikam, Shrikant B. and Puthuvakkal, Anisha and Vanka, Kumar and Manoj, Kochunnoonny and Gonnade, Rajesh G.} } @article {46835, title = {Generation and evaluation of pharmacologically relevant drug-drug cocrystal for gout therapy}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {JUN }, pages = {3577-3583}, type = {Article}, abstract = {

The present study reports a novel drug-drug cocrystal of febuxostat and piroxicam for the treatment of gout. Single crystal X-ray diffraction revealed a monoclinic system with P2(1)/c space group. The prepared cocrystal enhanced the solubility of febuxostat and piroxicam and improved the dissolution rate of piroxicam in pH 6.8 as compared to the pure drug. Further, the compressibility assessment of cocrystal by Aulton and Wells method confirmed its plastic behavior and suitability for direct compression.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.0c00106}, author = {Modani, Sheela and Gunnam, Anilkumar and Yadav, Balvant and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {46772, title = {Hexaaminobenzene derived two-dimensional polymer supercapacitor with high specific capacitance and energy density}, journal = {ACS Applied Energy Materials}, volume = {3}, year = {2020}, month = {JUL }, pages = {6352-6359}, type = {Article}, abstract = {

Recent research interest has been shifted toward energy storage devices, especially supercapacitors, which provide high specific power and long cycle life. In this context, two-dimensional organic polymers are a class of versatile materials found to be useful in energy storage applications. However, the performance is not promising due to the low capacitance, energy density, and cyclic stability. Here, we report a two-dimensional polymer derived from hexaaminobenzene and pyromellitic dianhydride and its excellent supercapacitor performance. The specific capacitance of the two-dimensional polymer is found to be 805 F g(-1) at 0.5 A g(-1) current density in galvanostatic charge-discharge, which is the highest among the organic twodimensional polymer and most of the carbon-based materials. The superior performance of the 2D-polymer compared to a model derivative (350 F g(-1) at 0.5 A g(-1) current density) points to the critical role of a 2D-platform to excel. The high energy density, excellent cyclic stability, and low self-discharge rate support the 2D-polymer supercapacitor as a promising candidate for futuristic applications.

}, keywords = {2D-polymer, energy density, Energy storage, hexaaminobenzene, supercapacitor}, issn = {2574-0962}, doi = {10.1021/acsaem.0c00569}, author = {Wakchaure, Vivek C. and Kottaichamy, Alagar R. and Nidhankar, Aakash D. and Ranjeesh, Kayaramkodath C. and Nazrulla, Mohammed A. and Thotiyl, Musthafa O. and Babu, Sukumaran S.} } @article {47150, title = {Highly active Br{\o}nsted acidic silicon phosphate catalyst for direct conversion of glucose to levulinic acid in MIBK{\textendash}water biphasic system}, journal = {SN Applied Sciences}, volume = {2}, year = {2020}, month = {JAN}, pages = {Article number: 51}, type = {Article}, abstract = {

Due to depletion of fossil fuel reserves and environmental concerns demand the utilization of other renewable feedstocks such as biomass which is available abundantly in different quantities throughout the world. Catalytic transformation of this biomass or biomass-derived products such as glucose to valuable platform biochemicals viz: levulinic acid (LA) is academically as well as industrially important reaction. In the present work, Silicon phosphates (SixPO4) catalysts viz: Si10PO4, Si20PO4, Si30PO4, and Si40PO4 having solely Br{\o}nsted acidic properties were prepared by wet impregnation of H3PO4 (10{\textendash}40\ wt\%) on fumed silica followed by calcination at 550\ {\textdegree}C for 10\ h. The prepared catalysts were characterized by various techniques such as XRD; NH3-TPD; FTIR etc. Formation of silicon phosphate structure was found to depend on \% of P loading and its interaction with silica. The acidic property of SixPO4 catalyst was characterized by NH3-TPD and Pyridine-IR, confirmed that catalyst has exclusively strong Br{\o}nsted acidity. A high LA yield of 81\ mol\% over Si30PO4 has achieved at an optimized reaction condition of 140\ {\textdegree}C; 10\ h in MIBK{\textendash}water (9:1) biphasic system.

}, doi = {10.1007/s42452-019-1827-z}, author = {Bokade, Vijay and Moondra, Hitakshi and Niphadkar, Prashant} } @article {46729, title = {Highly durable Li-ion battery anode from Fe3O4 nanoparticles embedded in nitrogen-doped porous carbon with improved rate capabilities}, journal = {Journal of Materials Science}, volume = {55}, year = {2020}, month = {NOV}, pages = {15667-15680}, type = {Article}, abstract = {

For next generation, lithium-ion batteries (LIBs) developing high capacity anode materials are crucial with increasing demand of large-scale application. Conversion-type anode materials are promising if stable cycling behavior could be achieved. In this work, a nitrogen-doped porous carbon-Fe3O4(NPC-Fe3O4) nanocomposite is synthesized via a simple and scalable approach. Composite is prepared by pyrolysis of polymer silica hybrid PolyHIPE (high internal phase emulsion) into NPC, and Fe3O4 nanoparticles (NPs) are anchored on its surface via hydrothermal synthesis. As-prepared NPC-Fe3O4 nanocomposite delivers high reversible capacity of around 1001 mAhg(-1)at 0.1 Ag-1 current density and rate capabilities and displays excellent cycling stability as high as 95\% capacity retention even after 400 cycles. Superior electrochemical performance of NPC-Fe3O4 is attributed to the hierarchical porous structure and nitrogen doping of carbon which shorten the diffusion path of Li+ and provide ample space to prevent aggregation of Fe3O nanoparticles. [GRAPHICS] .

}, issn = {0022-2461}, doi = {10.1007/s10853-020-05143-y, Early Access Date = AUG 2020}, author = {Deshmukh, Ashvini B. and Dwivedi, Pravin K. and Nalawade, Archana C. and Qureshi, Mohammed S. and Shelke, Manjusha V.} } @article {46676, title = {Highly efficient micro-meso acidic H-USY catalyst for one step conversion of wheat straw to ethyl levulinate (biofuel additive)}, journal = {Microporous and Mesoporous Materials}, volume = {306}, year = {2020}, month = {OCT}, pages = {110474}, type = {Article}, abstract = {

Ethyl Levulinate (EL), biofuel additive can blend up to 20\% with biodiesel to improve its fuel properties. Till the date, there are reports on homogeneous catalysts (H2SO4, ionic liquid) for synthesis of EL from raw biomass like wheat straw. To best of our knowledge, there is no single report on heterogeneous catalyst for one step synthesis of EL directly from wheat straw. This work is a successful attempt to use heterogeneous micro-meso acidic H-USY (post dealumination and desilication) for direct one step conversion of wheat straw to EL with higher EL yield 24.5 wt\%, which is probably the highest so far.

}, keywords = {Acidity, ethyl levulinate, H-USY, Micro-meso, Wheat straw}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2020.110474}, author = {Heda, Jidnyasa and Niphadkar, Prashant and Mudliar, Sandeep and Bokade, Vijay} } @article {46658, title = {Hydrophobic interpenetrating polyamide-PDMS membranes for desalination, pesticides removal and enhanced chlorine tolerance}, journal = {Chemosphere}, volume = {258}, year = {2020}, month = {NOV}, pages = {127179}, type = {Article}, abstract = {

Hydrophobic membranes for desalination and toxic organic pollutant removal have been fabricated using polyamide - PDMS (polydimethylsiloxane) chemistries in a one-step protocol. The curing of polyamide and PDMS are orthogonal and co-curing both networks imparts hydrophobicity to the thin film composite membranes. The membranes exhibit increased adsorption of pesticides from the feed water along with maintaining excellent salt rejection capability (97\% NaCl rejection), thus giving the membranes a multifunctional character. Three toxic pesticides have been used in this study to demonstrate the viability of combining osmosis desalination technology with organic matter adsorption. The membranes also show excellent resistance to fouling by toxic pesticides (85\% salt rejection vs 67\% for commercial membranes in the presence of pesticides) and significantly improved chlorine tolerance (93.8\% salt rejection vs 86.5\% for commercial membranes after 20 h of exposure to sodium hypochlorite solution). (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {PDMS (Polydimethylsiloxane), Pesticide rejection, Salt rejection, Water purification membranes}, issn = {0045-6535}, doi = {10.1016/j.chemosphere.2020.127179}, author = {Khairkar, Shyam R. and Pansare, V, Amol and Shedge, Amol A. and Chhatre, Shraddha Y. and Suresh, A. K. and Chakrabarti, Subhananda and Patil, Vishwanath R. and Nagarkar, Amit A.} } @article {46975, title = {Improving the dissolution rate of the anticancer drug dabrafenib}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {FEB}, pages = {1035-1046}, type = {Article}, abstract = {

Dabrafenib (DBF) is an anticancer drug with selective B-Raf (BRAF) inhibition activity. In 2013, DBF was approved by the U.S. Food and Drug Administration (US-FDA) as a dabrafenib mesylate salt (DBF center dot MS). Because of insolubility in aqueous medium, specifically at the pH 4-8 biorelevant range, DBF is a Biopharmaceutics Classification System (BCS) Class II drug (i.e., low solubility and high permeability). Therefore, screening of novel salts and cocrystals was carried out using Generally Recognized as Safe (GRAS) coformers. A total of 10 salts/cocrystals including the mesylate salt were found to be stable under the crystallization conditions. Among acidic coformers, methane sulfonic acid (MS) and saccharin (SACH) formed salts, while fumaric acid (FA), succinic acid (SA), and adipic acid (ADA) gave cocrystals. However, monoamines formed a monohydrate salt where the water molecule is hydrogen bonded with the aminopyrimidine moiety of DBF. The replacement of monoamines with ethylenediamine (EN) dislocated the water molecule near the free amine of EN in the crystal structure with a change in space group from triclinic (P (1) over bar) to monoclinic (P2(1)/n). Dissolution measurements at pH 1.2 (0.1 N HCl) showed that DBF center dot EN superset of H2O dissolved rapidly compared to the DBF.MS salt (the dissolution rate of DBF center dot EN superset of H2O and DBF center dot MS is 11 and 2 times faster than that of DBF). Structure-activity relationship analysis showed that bonding of the aminopyrimidine moiety with strong hydrogen bond synthons inhibited dissolution, whereas a loosely bound or free site at the aminopyrimidine moiety enhanced the dissolution rate. Finally, a cytotoxicity study was performed for DBF, DBF center dot MS, and DBF center dot EN superset of H2O, which showed that DBF center dot EN superset of H2O is safe for normal cells and yet equally potent against cancer cells. Crystal engineering of an improved formulation of dabrafenib center dot ethylenediamine hydrate is presented as a new anticancer drug.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.9b01365}, author = {Rai, Sunil K. and Gunnam, Anilkumar and Mannava, M. K. Chaitanya and Nangia, Ashwini K.} } @article {46761, title = {In situ cross-linked nonaqueous polymer electrolyte for zinc-metal polymer batteries and hybrid supercapacitors}, journal = {Small}, volume = {16}, year = {2020}, month = {SEP}, pages = {2002528}, type = {Article}, abstract = {

This work reports the facile synthesis of nonaqueous zinc-ion conducting polymer electrolyte (ZIP) membranes using an ultraviolet (UV)-light-induced photopolymerization technique, with room temperature (RT) ionic conductivity values in the order of 10(-3)S cm(-1). The ZIP membranes demonstrate excellent physicochemical and electrochemical properties, including an electrochemical stability window of \>2.4 V versus Zn|Zn(2+)and dendrite-free plating/stripping processes in symmetric Zn||Zn cells. Besides, a UV-polymerization-assisted in situ process is developed to produce ZIP (abbreviated i-ZIP), which is adopted for the first time to fabricate a nonaqueous zinc-metal polymer battery (ZMPB; VOPO4|i-ZIP|Zn) and zinc-metal hybrid polymer supercapacitor (ZMPS; activated carbon|i-ZIP|Zn) cells. The VOPO(4)cathode employed in ZMPB possesses a layered morphology, exhibiting a high average operating voltage of approximate to 1.2 V. As compared to the conventional polymer cell assembling approach using the ex situ process, the in situ process is simple and it enhances the overall electrochemical performance, which enables the widespread intrusion of ZMPBs and ZMPSs into the application domain. Indeed, considering the promising aspects of the proposed ZIP and its easy processability, this work opens up a new direction for the emergence of the zinc-based energy storage technologies.

}, keywords = {nonaqueous electrolytes, polymer electrolytes, postlithium batteries, Supercapacitors, zinc-metal batteries}, issn = {1613-6810}, doi = {10.1002/smll.202002528, Early Access Date = JUL 2020}, author = {Vijayakumar, Vidyanand and Ghosh, Meena and Kurian, Maria and Torris, Arun and Dilwale, Swati and Badiger, V. Manohar and Winter, Martin and Nair, Jijeesh Ravi and Kurungot, Sreekumar} } @article {46871, title = {Induction of somatic embryogenesis in leaf and root explants of Digitalis lanata Ehrh.: direct and indirect method}, journal = {South African Journal of Botany}, volume = {130}, year = {2020}, month = {MAY}, pages = {356-365}, type = {Article}, issn = {0254-6299}, doi = {10.1016/j.sajb.2020.01.012}, author = {Bhusare, B. P. and John, C. K. and Bhatt, V. P. and Nikam, T. D.} } @article {46672, title = {Inhibition of quorum sensing, motility and biofilm formation ofpseudomonas aeruginosaby copper oxide nanostructures}, journal = {Journal of Cluster Science}, volume = {32}, year = {2020}, month = {OCT}, pages = {1531 - 1541}, type = {Article; Early Access}, abstract = {

Quorum sensing (QS) is the communication between bacterial cells governed by their population density and regulated by the genes controlling virulence factors and biofilm formation. Multiple mechanisms of biofilms are resistive to antimicrobial chemotherapy; therefore novel strategies are required to overcome its limitations. Here, we report the effect of various copper oxide nanostructures (CuO-NSs) on quorum sensing inhibition. The two-dimensional CuO-NSs such as interlaced nanodiscs, nanodiscs and leaf-shaped nanosheets are prepared via a simple chemical method. The Quorum sensing inhibition (QSI) activity of all the CuO-NS are examined using reporter strainChromobacterium violaceumCV026 andEscherichia colipSB1142. We found that the CuO-interlaced nanodisc structures exhibit better QSI activity than nanodiscs and leaf-shaped sheets. The interlaced nanodisc structures are inhibited various long-chainN-acyl homoserine lactones (AHLs) mediated QS individually and confirmed by other QS-associated phenomena forPseudomonas aeruginosa, including biofilm inhibition, inhibition of virulence factors such as pyocyanin, protease production and swarming motility. Thus QSI activity of CuO-NSs is solely dependent on specific shape offering large surface area and more active sites. The CuO-NS is effective quorum sensing inhibitors, which has potential clinical applications in the management ofP. aeruginosaassociated infections.

}, keywords = {aeruginosa, Biofilm, Nanostructures, P, quorum sensing, Virulence factors}, isbn = {1572-8862}, issn = {1040-7278}, doi = {10.1007/s10876-020-01916-2}, author = {Desai, Dnyanada G. and Swarali, H. and Navale, Govinda R. and Prabhune, A. and Late, Dattatray J. and Dharne, Mahesh S. and Walke, Pravin S.} } @article {46968, title = {Insights into the catalytic activity of Ru/NaY catalysts for efficient H-2 production through aqueous phase reforming}, journal = {Sustainable Energy \& Fuels}, volume = {4}, year = {2020}, month = {FEB }, pages = {678-690}, type = {Article}, abstract = {

Ruthenium nanoparticles supported on NaY zeolite catalysts were synthesized by a simple ion exchange method. The structural and morphological features of the catalysts were systematically investigated using numerous techniques such as N-2-sorption, XRD, CO2-TPD, H-2-TPR, TEM, SEM, ICP-OES, TGA, CHN analysis, XPS, in situ CO-FTIR and NMR spectroscopy. These novel Ru-NaY catalysts were highly active and selective for H-2 production through aqueous phase reforming (APR) of glycerol and ethylene glycol. Among the various catalysts evaluated for H-2 production, the 3 wt\% Ru-NaY catalyst demonstrated the highest catalytic performance with excellent H-2 selectivity and this catalyst exhibits better activity as compared to many state of the art catalysts reported so far. The superior catalytic activity of 3 wt\% Ru-NaY was attributed to the appropriate Ru metal loading, good metal dispersion, small size of Ru nanoparticles, better metal-support interaction, and higher availability of catalytically active sites (Ru-0) and facilitated water gas shift (WGS) reaction. This catalytic activity result clearly shows that NaY zeolite supported Ru nanoparticles catalysts have excellent potential for H-2 production from biomass-derived compounds.

}, issn = {2398-4902}, doi = {10.1039/c9se00797k}, author = {Gogoi, Pranjal and Nagpure, Atul S. and Kandasamy, Prabu and Satyanarayana, C. V. V. and Raja, Thirumalaiswamy} } @article {46714, title = {Integrating structurally perfect s=1/2 kagome-lattice with reduced graphene oxide}, journal = {Journal of Physical Chemistry C}, volume = {124}, year = {2020}, month = {SEP}, pages = {19753-19759}, type = {Article}, abstract = {

S = 1/2 kagome-lattice hydroxychlorides are promising candidates for realizing the elusive quantum spin liquid (QSL) state. Herbertsmithite [Cu3Zn(OH)(6)Cl-2], a naturally occurring hydroxychloride mineral from the class of atacamites {[Cu-4-xMx(OH)(6)X-2] where M = Zn, Cu, Co, Ni and X = Cl, Br, I}, is one of the most appealing systems to study the QSL state because of the presence of a structurally perfect S = 1/2 kagome-lattice. It is an electrical insulator. However, realizing phase-pure herbertsmithite without imposing harsh reaction conditions remained synthetically challenging. In this work, for the first time, we have synthesized phase-pure herbertsmithite as well as its structural analogue paratacamite, [ZnxCu4-x(OH)(6)Cl-2; 0.33 = x \< 1], at ambient reaction conditions. Furthermore, taking graphene oxide (GO) as an additional precursor in the reaction mixture, we have successfully integrated phase-pure crystallites of herbertsmithite (H) and paratacamite (P) with nanosheets of semiconducting and diamagnetic reduced graphene oxide (rGO) by in situ oxidation-reduction reaction. The isolated H-rGO and P-rGO systems were found to be magnetic semiconductors inheriting strong spin frustration from H and P, and semiconductivity from rGO. The H-rGO system in particular exhibited negative Seebeck coefficient (n-type semiconductor) with a thermoelectric power factor of 0.1 mu W center dot m(-1)center dot K-2 at 400 K. We anticipate the simple chemical principles outlined in this work to be useful for studying a variety of complex QSLs including electron doping. Also, semiconducting and rather unconventional materials of such metal oxochlorides with rGO isolated here need further exploration in view of thermoelectric applications.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.0c06564}, author = {Gupta, Kriti and Dadwal, Arun and Ninawe, Pranay and Joy, Pattayil A. and Ballav, Nirmalya} } @article {46645, title = {Lauric acid sophorolipid: accelerating the gelation of silk fibroin}, journal = {ACS Omega}, volume = {5}, year = {2020}, month = {NOV}, pages = {28571-28578}, type = {Article}, abstract = {

Silk fibroin (SF) hydrogels find wide applications in tissue engineering. However, their scope has been limited due to the long gelation time in ambient conditions. This paper shows the reduction in gelation time of silk fibroin to minutes upon doping with a newly synthesized lauric acid sophorolipid (LASL). LASL comprises a fatty acid, lauric acid (with a 12-carbon aliphatic chain), that is derivatized by glucose molecules using a non-pathogenic yeast Candida bombicola. LASL was characterized using spectroscopic (Fourier transform infrared spectroscopy) and chromatographic (high-performance liquid chromatography, thin-layer chromatography, and high-resolution mass spectrometry) methods. This gelation of SF is comparable to the effect of an anionic surfactant, sodium dodecyl sulfate (SDS). The microstructure of SF-LASL hydrogels was investigated by small-angle neutron scattering (SANS) measurements and exhibited the beads-on-a-necklace model. The rheological properties of these hydrogels show similarity to SF-SDS hydrogels, therefore presenting a greener alternative for tissue engineering applications.

}, issn = {2470-1343}, doi = {10.1021/acsomega.0c03411}, author = {Hirlekar, Swarali and Ray, Debes and Aswal, Vinod K. and Prabhune, Asmita A. and Nisal, Anuya} } @article {46755, title = {Maximization of furanic compounds formation by dehydration and hydrogenation of xylose in one step over SO3-H functionalized H-beta catalyst in alcohol media}, journal = {Biomass \& Bioenergy}, volume = {139}, year = {2020}, month = {AUG}, pages = {105646}, type = {Article}, abstract = {

Furanic compounds such as furfural (FUR); furfuryl alcohol (F. Alc) are important renewable platform chemicals can be used as such or further convert for preparation of other value added products such as Levulinic acid (LA), Alkyl Levulinates, 2-Methyltetrahydrofuran (MTHF), and Tetrahydrofuran (THF) etc. Sulfonated H-beta zeolite was successfully prepared and used for the synthesis of furanic compounds especially FUR and F. Alc from c-xylose in one step using isopropanol as alcohol media. Prepared catalyst was well characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), BET, NH3-Temperature programmed desorption (TPD) and carbon-hydrogen-nitrogen-sulfur analysis (CHNS). It was found the total acid amount was increased with increase in sulfur loading which confirmed the sulfonic acid group (SO3-H) was successfully grafted onto zeolite structure. 3 wt\% H-beta-SO3-H catalyst with optimized reaction parameters of 150 degrees C, 7 h, 25 wt\% catalyst loading was tuned to get the highest furanic compound yield of 88.5\% (FUR 76.8\% + F.Alc 11.7\%).The reusability study confirmed that there was a marginal drop of similar to 25\% after 3 recycle runs.

}, keywords = {furfural, Furfuryl alcohol, H-beta, isopropanol, sulfonated zeolite, Xylose}, issn = {0961-9534}, doi = {10.1016/j.biombioe.2020.105646}, author = {Gupta, Anshita and Nandanwar, Sachin U. and Niphadkar, Prashant and Simakova, Irina and Bokade, Vijay} } @article {46868, title = {Naftopidil molecular salts with improved dissolution and permeation}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {MAY }, pages = {3064-3076}, type = {Article}, abstract = {

Naftopidil (NFPD) is a alpha 1 adrenoceptor antagonist drug. Low solubility and low permeability are the major drawbacks of this drug. The synthesis of multicomponent crystalline forms of this amine functional group drug with carboxylic acid coformers, both achiral and chiral acids, provides a solution to improve its solubility as well as permeability. Nine molecular salts were crystallized by liquid-assisted grinding followed by isothermal crystallization. Single-crystal X-ray diffraction analysis of the molecular salts showed that the structures are stabilized by strong N-H center dot center dot center dot O and O-H center dot center dot center dot O and weak C-H center dot center dot center dot O hydrogen bonds in the solid state. The bulk phase purity of new solid forms was confirmed by powder X-ray diffraction (PXRD), and the crystalline products were further characterized by IR spectroscopy and thermal analytical techniques (differential scanning calorimetry). The molecular salts exhibit superior dissolution rates compared to pure NFPD. However, during dissolution, NFPD showed decrease in concentration after 60 min for all salts due to precipitation. The supersaturation occurred due to salt disproportionation, which generates insoluble NFPD, as confirmed by PXRD of the residue. The salts reach high saturation concentration before 60 min, which is indicative of immediate release formulation to achieve fast onset of therapeutic activity. Moreover, the salts exhibit high saturation in phosphate buffer saline media and improved permeability compared to the pure drug. Finally, the D,L-malic acid racemate of NFPD shows enhanced dissolution and permeability compared to all other salts and pure NFPD.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.9b01689}, author = {Mannava, M. K. Chaitanya and Dandela, Rambabu and Tothadi, Srinu and Solomon, K. Anand and Nangia, Ashwini K.} } @article {46655, title = {Nanocomposite of functional silver metal containing curcumin biomolecule model systems: Protein BSA bioavailability}, journal = {Journal of Inorganic Biochemistry}, volume = {212}, year = {2020}, month = {NOV}, pages = {111210}, type = {Article}, abstract = {

Curcumin, a constituent of Curcuma longa L-Zingiberaceae is used in traditional Indian and worldwide medicine and shows anticancer and antioxidant properties. Curcumin has numerous biological and pharmacological ac-tivities but due to its hydrophobic nature, the major drawback is poor absorption and rapid elimination, rendering curcumin with the tag of a poor biomaterial. Hence, there is a need to develop functional metal containing curcumin model systems (FMCCMS) as a metallo-biomolecule to enhance the bioavailability of curcumin. We designed the interaction of silver metal ion with curcumin to form curcumin-silver nanocomposite (CURC-AgNCP) via ultrasonic synthetic route. Formations of FMCCMS were characterized by spectroscopic techniques. The crystalline face-centered cubic pattern and particle size of the nanocomposite was evaluated using X-ray diffraction and high-resolution transmission electron microscopy. The bonding of silver metal to curcumin was confirmed by X-ray photon spectroscopy. Interaction of the nanocomposite with bovine serum albumin (BSA) protein was performed using excitation, emission, and circular dichroism spectroscopy. In binding interaction of BSA, the negative value of Delta S degrees (-358.04 J mol(-1) K-1) and Delta H degrees (-129.42 KJ mol(-1)) demonstrates the hydrophilic nature of the nanocomposite. The binding distance r evaluated according to the Forster resonance energy transfer theory and was 4.69 nm for CURC-AgNCP, which suggested non-radiative transfer of energy between CURC-AgNCP and BSA. The role of FMCCMS metallo-biomolecule CURC-AgNCP in medicine for cancer activity can have immense importance and hence we performed Sulphorhodamine B based in-vitro cytotoxicity assay on human breast cancer Michigan Cancer Foundation-7 cell line.

}, keywords = {Ag-based CURC biomaterials, Breast cancer, Metal in medicine, Metallobiomolecules, Nanocomposite}, issn = {0162-0134}, doi = {10.1016/j.jinorgbio.2020.111210}, author = {Shedge, Amol A. and Pansare, Shubham V. and Khairkar, Shyam R. and Chhatre, Shraddha Y. and Chakrabarti, S. and Nagarkar, Amit A. and Pansare, Amol V. and Patil, Vishwanath R.} } @inbook {47306, title = {Nanorobots for in vivo monitoring: the future of nano-implantable devices}, booktitle = {Nanobiomaterial Engineering }, year = {2020}, pages = {227-252}, publisher = {Springer}, organization = {Springer}, abstract = {

Innovation is important for the healthcare system advancement, in order to continue delivering the high-quality care at an affordable cost to the society. It can be achieved by nonconventional thinking, tapping into creative minds, and extensive collaborative work to make better use of existing facilities and designing new technologies. Nanorobotics is such an innovation that can revolutionize the current face of medicine and biomedical sciences with their state-of-the-art technology. Improved outcomes of nanorobots-based treatments for diabetes, drug delivery for pancreatic and ovarian cancer, and laparoscopic treatment of skin cancer have already been reported. This book chapter will cover the recent advancements of this emerging field with their biomedical applications.

}, doi = {10.1007/978-981-32-9840-8_12}, author = {Gandhi, Mamta and Nigam, Preeti} } @article {46852, title = {NetConfer: a web application for comparative analysis of multiple biological networks}, journal = {BMC Biology}, volume = {18}, year = {2020}, month = {MAY}, pages = {53}, type = {Article}, abstract = {

Background Most biological experiments are inherently designed to compare changes or transitions of state between conditions of interest. The advancements in data intensive research have in particular elevated the need for resources and tools enabling comparative analysis of biological data. The complexity of biological systems and the interactions of their various components, such as genes, proteins, taxa, and metabolites, have been inferred, represented, and visualized via graph theory-based networks. Comparisons of multiple networks can help in identifying variations across different biological systems, thereby providing additional insights. However, while a number of online and stand-alone tools exist for generating, analyzing, and visualizing individual biological networks, the utility to batch process and comprehensively compare multiple networks is limited. Results Here, we present a graphical user interface (GUI)-based web application which implements multiple network comparison methodologies and presents them in the form of organized analysis workflows. Dedicated comparative visualization modules are provided to the end-users for obtaining easy to comprehend, insightful, and meaningful comparisons of various biological networks. We demonstrate the utility and power of our tool using publicly available microbial and gene expression data. Conclusion NetConfer tool is developed keeping in mind the requirements of researchers working in the field of biological data analysis with limited programming expertise. It is also expected to be useful for advanced users from biological as well as other domains (working with association networks), benefiting from provided ready-made workflows, as they allow to focus directly on the results without worrying about the implementation. While the web version allows using this application without installation and dependency requirements, a stand-alone version has also been supplemented to accommodate the offline requirement of processing large networks.

}, keywords = {Bioinformatics, biological networks, Interaction networks, Network comparison, visualization}, doi = {10.1186/s12915-020-00781-9}, author = {Nagpal, Sunil and Baksi, Krishanu Das and Kuntal, Bhusan K. and Mande, Sharmila S.} } @article {46668, title = {NetConfer: a web application for comparative analysis of multiple biological networks (vol 18, 53, 2020)}, journal = {BMC Biology}, volume = {18}, year = {2020}, month = {OCT}, pages = {147}, type = {Correction}, abstract = {

An amendment to this paper has been published and can be accessed via the original article.

}, doi = {10.1186/s12915-020-00898-x}, author = {Nagpal, Sunil and Das Baksi, Krishanu and Kuntal, Bhusan K. and Mande, Sharmila S.} } @article {46974, title = {Novel pharmaceutical cocrystals and salts of bumetanide}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {FEB}, pages = {793-803}, type = {Article}, abstract = {

New crystalline forms of bumetanide, namely, four cocrystals, two salts, and one salt-cocrystal were crystallized. Urea and lactams such as valerolactam, caprolactam, and N-methyl caprolactam formed cocrystals with bumetanide, whereas 4-aminopyridine gave a salt. Piperazine afforded a salt hydrate, and 5-fluorocytosine gave a salt-cocrystal. The supramolecular synthons in bumetanide-lactam cocrystals are an amide dimer between drug and coformer, and acid homo dimer between bumetanide molecules. In bumetanide salts, the acid proton is transferred from bumetanide to coformer amine, whereas in bumetanide salt-cocrystal proton transfer and free acid were observed in the crystal structure. Similarly, the cytosine salt-cocrystal of bumetanide and fluorocytosine also gave a salt-cocrystal adduct. The acid proton of bumetanide is transferred to the 2-amino pyridine base of cytosine as a salt, and on the other side of the drug molecule the sulfonamide interacts with the syn amide part of cytosine. Furthermore, solubility, dissolution, and diffusion membrane permeability experiments were performed on all new solid forms. The piperazine salt shows high dissolution and permeability crossover when compared to other binary forms of bumetanide.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.9b01195}, author = {Allu, Suryanarayana and Bolla, Geetha and Tothadi, Srinu and Nangia, Ashwini K.} } @article {46805, title = {Novel Ru nanoparticle catalysts for the catalytic transfer hydrogenation of biomass-derived furanic compounds}, journal = {Sustainable Energy \& Fuels}, volume = {4}, year = {2020}, month = {JUL }, pages = {3654-3667}, type = {Article}, abstract = {

The catalytic transfer hydrogenation (CTH) reaction was investigated for boosting the reduction of biomass-derived furanic compounds to obtain high-quality liquid biofuels. The CTH of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) and furfural to 2-methylfuran (MF) was thoroughly studied over the Ru, Pd, Au, Pt, Ni, Rh and Cu metal catalysts supported on nitrogen-doped mesoporous carbons (NMCs) by utilizing 2-propanol as a source of hydrogen. The structural characteristics of the materials were examined by employing various physico-chemical methods, such as XRD, N(2)sorption, CHN analysis, XPS, FT-IR spectroscopy, H-2-TPR, TEM, CO2-TPD, ICP-OES and Raman spectroscopy. The influence of the N content, basicity of the catalyst, reaction temperature, hydrogen donor, nature of the catalyst support and transition metal was systematically investigated with regard to the substrate conversions and product yields. The correlation between the N content (wt\%) of the catalysts and the Ru nanoparticle size (nm) and turnover frequency (h(-1)) was also investigated. Highly dispersed Ru nanoparticles (1.9 nm) supported on NMC displayed admirable catalytic performance in CTH for the conversion of HMF to DMF and furfural to MF. The catalyst Ru-NMC with a good N content (11.4 wt\%) gave 84 and 87 mol\% yields of DMF and MF, respectively, with 2-propanol as the source of hydrogen under mild reaction conditions. In addition, this catalyst demonstrated excellent recyclability. The better catalytic activity of the Ru-NMC catalyst in the CTH of HMF and furfural was credited to the small size of the Ru metal nanoparticles (1.9 nm), high N content, superior metal-support interaction and mesoporous framework of the catalyst.

}, issn = {2398-4902}, doi = {10.1039/d0se00361a}, author = {Nagpure, Atul S. and Gogoi, Pranjal and Lucas, Nishita and Chilukuri, V. Satyanarayana} } @article {46973, title = {One-pot synthesis of bimodal (macro-meso, micro-mesoporous) silica by polyHIPE: parameter studies}, journal = {Journal of Porous Materials}, volume = {27}, year = {2020}, month = {FEB}, pages = {263-275}, type = {Article}, abstract = {

Porous silica with hierarchical organization of pore structure is desired for a variety of applications such as, chromatography, sensing, control release, scaffold for biomedical applications and catalysis. Highly porous polymers obtained from high internal phase emulsion (HIPE) templating route have attracted increasing attention of researchers due to their hierarchical porous and interconnected structure with high porosity and low density. The novel method adopted in our approach combines redox initiated polymerization using HIPE polymerization and an in-situ sol-gel processing technique followed by calcination to obtain highly porous materials. The obtained materials have reminiscent of polyHIPE morphology containing pores and interconnected pore throats in micrometer size range with mesopores on the wall of macropores. The effect of concentration of TEOS, volume of dispersed phase, crosslinker concentration, shear rate and surfactant concentration as well as variation in calcination temperatures on the properties of silica materials were examined.

}, keywords = {Mesoporous material, PolyHIPE, Polymer-silica hybrid, Porous silica}, issn = {1380-2224}, doi = {10.1007/s10934-019-00807-w}, author = {Wale, Apparav and Nalawade, Archana and Ponrathnam, Surendra and Rajan, C. R. and Badiger, Manohar} } @proceedings {47332, title = {Photocatalytic hydrogen production from H2S using nanostructured CNT blended CdZnS/Fe2O3 thin film on glass substrate}, volume = {1495}, year = {2020}, month = {MAR}, publisher = {IOP Publishing Ltd}, abstract = {

A co-precipitation method was employed to prepare the CNT blended CdZnS/Fe2O3\ photocatalyst. Using the powder photocatalyst, the thin film of CNT blended CdZnS/Fe2O3\ photocatalyst over a glass substrate was prepared using the drop-casting method. The obtained thin film was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDAX), photoluminescence (PL), and hydrogen production activity studies in order to obtain information on their structural, morphology, chemical composition, optical and hydrogen production efficiency. The hydrogen production activity of catalyst or effective conversion of H2S into hydrogen (H2) and sulfur (S) using thin-film photocatalyst was evaluated using a simulated sulfide solution. The results showed that 1 mg of CNT blended CdZnS/Fe2O3\ catalyst coated as thin film over glass substrate (4.69 cm2) showed the highest hydrogen production value of 3180 μmol h-1g-1; compared to that of 1 mg CNT blended CdZnS/Fe2O3\ powder of 2510 μmol h-1g-1. From the above results, it is concluded that the thin film form of photocatlyst produced more hydrogen than the powder form. This is attributed to the effective charge separation and increased specific surface area in thin film photocatalyst.

}, doi = {10.1088/1742-6596/1495/1/012035}, author = {Raja, M. Anthony and Vijayarengan, Preethi and Pal, Yash and Nalajala, Naresh and Gopinath, Chinnakonda} } @article {46727, title = {Plant-pathogen interactions: microRNA-mediated trans-kingdom gene regulation in fungi and their host plants}, journal = {Genomics}, volume = {112}, year = {2020}, month = {SEP}, pages = {3021-3035}, type = {Article}, abstract = {

MicroRNAs (miRNAs) have been prevalently studied in plants, animals, and viruses. However, recent studies show evidences of miRNA-like RNAs (milRNAs) in fungi as well. It is known that after successful infection, pathogens hijack the host machinery and use it for their own growth and multiplication. Alternatively, resistant plants can overcome the pathogen attack by a variety of mechanisms. Based on this prior knowledge, we computationally predicted milRNAs from 13 fungi, and identified their targets in transcriptomes of the respective fungi as well as their host plants. The expressions of the milRNAs and targets were confirmed using qRT-PCR. We found that plant miRNAs targeted fungal virulence genes, while fungal milRNAs targeted plant resistance genes; corroborating miRNA-mediated trans-kingdom gene regulation and the roles of miRNAs in plantpathogen interactions. Transgenic plants with miRNAs targeting fungal virulence genes, or anti-sense of fungal milRNAs, would be expected to be highly resistant to the fungal pathogens.

}, keywords = {Disease resistance, Fungal miRNAs, qRT-PCR, Resistance genes, Target prediction, Virulence genes}, issn = {0888-7543}, doi = {10.1016/j.ygeno.2020.05.021}, author = {Mathur, Monika and Nair, Aswathy and Kadoo, Narendra} } @article {46720, title = {Prediction of survival rate and effect of drugs on cancer patients with somatic mutations of genes: an AI-based approach}, journal = {Chemical Biology \& Drug Design}, volume = {96}, year = {2020}, month = {SEP}, pages = {1005-1019}, type = {Article}, abstract = {

The causal role of somatic mutation and its interrelationship with gene expression profile during tumor development has already been observed, which plays a major role to decide the cancer grades and overall survival. Accurate and robust prediction of tumor grades and patients{\textquoteright} overall survival are important for prognosis, risk factors identification and betterment of the treatment strategy, especially for highly lethal tumors, like gliomas. Here, with the help of more accurate and widely used machine learning-based approaches, we propose an integrative computational pipeline that incorporates somatic mutations and gene expression profile for survival and grade prediction of glioma patients and simultaneously relates it to the drugs to be administered. This study gives us a clear understanding that the same drug is not effective for the treatment of same grade of cancer if the gene mutations are different. The alteration in a specific gene plays a very important role in tumor progression and should also be considered for the selection of appropriate drugs. This proposed framework includes all the necessary factors required for enhancement of therapeutic designs and could be useful for clinicians in determining an accurate and personalized treatment strategy for individual patients suffering from different life threatening diseases.

}, keywords = {gene expression and copy number variation, gliomas, grade and survival prediction, machine learning strategy, significant gene prediction and effect of drugs, somatic mutation}, issn = {1747-0277}, doi = {10.1111/cbdd.13668}, author = {Saurabh, Rochi and Nandi, Sutanu and Sinha, Noopur and Shukla, Mudita and Sarkar, Ram Rup} } @article {46788, title = {Relativistic coupled-cluster study of BaF in search of CP violation}, journal = {Journal of Physics B-Atomic Molecular and Optical Physics}, volume = {53}, year = {2020}, month = {JUL}, pages = {135102}, type = {Article}, abstract = {

BaF is one of the potential candidates for the experimental search of the electric dipole moment of the electron (eEDM). The NL-eEDM collaboration is building a new experimental set up to measure the eEDM using the BaF molecule (The NL-eEDM collaboration, 2018 Eur. Phys. J. D 72: 197). To analyze the results of such an experiment, one would require the accurate value of the molecular P, T-odd interaction parameters that cannot be measured from any experiment. In this work, we report the precise value of the P, T-odd interaction parameters of the BaF molecule obtained from the four-component relativistic coupled-cluster calculations. We also calculate the hyperfine structure (HFS) constants of the same molecule to assess the reliability of the reported molecular parameters. The calculated HFS constants show good agreement with the available experimental values. Further, the systematic effects of electron-correlation along with the roles of inner-core electrons and the virtual energy functions in the calculation of the studied properties of BaF are investigated.

}, keywords = {electric dipole moment of the electron, electron-correlation, Relativistic effects}, issn = {0953-4075}, doi = {10.1088/1361-6455/ab84c8}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {46927, title = {Relativistic double-ionization equation-of-motion coupled-cluster method: application to low-lying doubly ionized states}, journal = {Journal of Chemical Physics}, volume = {152}, year = {2020}, month = {MAR}, pages = {104302}, type = {Article}, abstract = {

This article deals with the extension of the relativistic double-ionization equation-of-motion coupled-cluster (DI-EOMCC) method [H. Pathak et al. Phys. Rev. A 90, 010501(R) (2014)] for the molecular systems. The Dirac-Coulomb Hamiltonian with four-component spinors is considered to take care of the relativistic effects. The implemented method is employed to compute a few low-lying doubly ionized states of noble gas atoms (Ar, Kr, Xe, and Rn) and Cl-2, Br-2, HBr, and HI. Additionally, we presented results with two intermediate schemes in the four-component relativistic DI-EOMCC framework to understand the role of electron correlation. The computed double ionization spectra for the atomic systems are compared with the values from the non-relativistic DI-EOMCC method with spin-orbit coupling [Z. Wang et al. J. Chem. Phys. 142, 144109 (2015)] and the values from the National Institute of Science and Technology (NIST) database. Our atomic results are found to be in good agreement with the NIST values. Furthermore, the obtained results for the molecular systems agree well with the available experimental values.

}, issn = {0021-9606}, doi = {10.1063/1.5140988}, author = {Pathak, Himadri and Sasmal, Sudip and Talukdar, Kaushik and Nayak, Malaya K. and Veval, Nayana and Pal, Sourav} } @article {46763, title = {Review of porous adsorbents for the separation of nitrogen from natural gas}, journal = {Industrial \& Engineering Chemistry Research}, volume = {59}, year = {2020}, month = {JUL}, pages = {13355-13369}, type = {Review}, abstract = {

Natural gas is one of the critical fossil fuel sources in the world to fulfill current energy demand in the global market. Methane is the primary component in natural gas and its concentration is dependent on the source; a variety of impurities, such as nitrogen, carbon dioxide, oxygen, helium, hydrogen sulfide, water, and heavier hydrocarbons can be present, which reduces the overall fuel quality. Purification of natural gas is important in order to meet the U.S. pipeline and minimum heating value specifications. The separation of nitrogen from methane is challenging because of their similar molecular size (i.e., the two gases differ in kinetic diameter by only 0.16 angstrom). This Review discusses different methods for separating nitrogen from methane. Of these methods, pressure swing adsorption is one of the most effective techniques for separating nitrogen from natural gas using porous adsorbents, and encouraging results have been demonstrated in the past few decades. Many types of porous adsorbents are discussed here, including carbon molecular sieves, activated carbons, zeolites, titanosilicates, and metal-organic frameworks. Future trends and materials are discussed to put into perspective the new opportunities in this research area.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.0c02730}, author = {Nandanwar, Sachin U. and Corbin, David R. and Shiflett, Mark B.} } @article {46932, title = {Role of electron correlation in the P, T-odd effects of CdH: a relativistic coupled-cluster investigation}, journal = {Physical Review A}, volume = {101}, year = {2020}, month = {MAR }, pages = {032505}, type = {Article}, abstract = {

We investigate the parity (P) and time-reversal (T) symmetry violating effects in the CdH molecule and perform the relativistic coupled-cluster calculation of the molecular parameters-E-eff, W-s, and W-M-related to the electric dipole moment of electron (eEDM) interaction, the scalar-pseudoscalar (S-PS) nucleus-electron neutral current coupling, and the nuclear magnetic quadrupole moment (MQM) interaction with electrons, respectively. We also compute the molecular dipole moment and the magnetic hyperfine structure coupling constant of CdH. The values of E-eff, W-s, and W-M obtained by us in the said molecule are 12.2 GV/cm, 14.0 kHz, and 0.82 x 10(33) Hz/e cm(2), respectively, within an uncertainty of 10\%. Furthermore, we study the trend of electron-correlation in the computed properties of CdH and that of the P, T-odd parameters in the group-12 monohydrides (i.e., ZnH, CdH, and HgH).

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.101.032505}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @inbook {47305, title = {Role of jasmonate in modulation of mycorrhizae-induced resistance against fungal pathogens}, booktitle = {Methods in Molecular Biology}, volume = {2085}, year = {2020}, pages = {109-115}, publisher = {Springer}, organization = {Springer}, abstract = {

Symbiotic association of plants with arbuscular mycorrhizal (AM) fungi brings about changes in levels of the phytohormone jasmonate (JA) in root and shoot tissues of a plant. The enhanced JA levels not only play a role in controlling the extent of AM colonization but are also involved in the expression of mycorrhizal-induced resistance (MIR) against pathogens. We describe a method used to study the levels of a volatile jasmonate derivative, methyl jasmonate (MeJA), in tomato plants colonized by AM fungi and in response to subsequent attack by the foliar pathogen Alternaria alternata.

}, doi = {10.1007/978-1-0716-0142-6_8}, author = {Nair, Aswathy and Thulasiram, H. V. and Bhargava, Sujata} } @article {46847, title = {Role of microglia in regulating cholesterol and tau pathology in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, year = {2020}, month = {MAY}, type = {Review; Early Access 2020}, abstract = {

Cholesterol, a principal constituent of the cell membrane, plays a crucial role in the brain by regulating the synaptic transmission, neuronal signaling, as well as neurodegenerative diseases. Defects in the cholesterol trafficking are associated with enhanced generation of hyperphosphorylated Tau and Amyloid-beta protein. Tau, a major microtubule-associated protein in the brain, is the key regulator of the mature neuron. Abnormally hyperphosphorylated Tau hampers the major functions related to microtubule assembly by promoting neurofibrillary tangles of paired helical filaments, twisted ribbons, and straight filaments. The observed pathological changes due to impaired cholesterol and Tau protein accumulation cause Alzheimer{\textquoteright}s disease. Thus, in order to regulate the pathogenesis of Alzheimer{\textquoteright}s disease, regulation of cholesterol metabolism, as well as Tau phosphorylation, is essential. The current review provides an overview of (1) cholesterol synthesis in the brain, neurons, astrocytes, and microglia; (2) the mechanism involved in modulating cholesterol concentration between the astrocytes and brain; (3) major mechanisms involved in the hyperphosphorylation of Tau and amyloid-beta protein; and (4) microglial involvement in its regulation. Thus, the answering key questions will provide an in-depth information on microglia involvement in managing the pathogenesis of cholesterol-modulated hyperphosphorylated Tau protein.

}, keywords = {Alzheimer{\textquoteright}s disease, Amyloid-beta protein, Cholesterol, microglia, Tau hyperphosphorylation}, issn = {0272-4340}, doi = {10.1007/s10571-020-00883-6}, author = {Nanjundaiah, Shwetha and Chidambaram, Hariharakrishnan and Chandrashekar, Madhura and Chinnathambi, Subashchandrabose} } @article {46804, title = {Salts and cocrystal of etodolac: advantage of solubility, dissolution, and permeability}, journal = {Crystal Growth \& Design}, volume = {20}, year = {2020}, month = {JUL }, pages = {4512-4522}, type = {Article}, abstract = {

{Etodolac (ETD) is a nonsteroidal anti-inflammatory drug (NSAID) approved by the United States Food and Drug Administration (US-FDA) in 1991 for the treatment of rheumatoid arthritis. Because of its poor aqueous solubility and high permeability, ETD falls under Biopharmaceutics Classification System (BCS) Class II drug. The present study was aimed to screen stable salts and cocrystals of ETD using Generally Recognized as Safe (GRAS) and a few non-GRAS coformers. Crystallization of five salts (i.e.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.0c00313}, author = {Rai, Sunil K. and Allu, Suryanarayana and Nangia, Ashwini K.} } @article {46833, title = {Self-assembled helical arrays for the stabilization of the triplet state}, journal = {Angewandte Chemie-International Edition}, volume = {59}, year = {2020}, month = {JUL}, pages = {13079-13085}, type = {Article}, abstract = {

Room-temperature phosphorescence of metal and heavy atom-free organic molecules has emerged as an area of great potential in recent years. A rational design played a critical role in controlling the molecular ordering to impart efficient intersystem crossing and stabilize the triplet state to achieve room-temperature ultralong phosphorescence. However, in most cases, the strategies to strengthen phosphorescence efficiency have resulted in a reduced lifetime, and the available nearly degenerate singlet-triplet energy levels impart a natural competition between delayed fluorescence and phosphorescence, with the former one having the advantage. Herein, an organic helical assembly supports the exhibition of an ultralong phosphorescence lifetime. In contrary to other molecules, 3,6-phenylmethanone functionalized 9-hexylcarbazole exhibits a remarkable improvement in phosphorescence lifetime (\>4.1 s) and quantum yield (11 \%) owing to an efficient molecular packing in the crystal state. A right-handed helical molecular array act as a trap and exhibits triplet exciton migration to support the exceptionally longer phosphorescence lifetime.

}, keywords = {carbazole, helicity, phenylmethanone, ultralong phosphorescence, waveguiding}, issn = {1433-7851}, doi = {10.1002/anie.202005105, Early Access Date = JUN 2020}, author = {Nidhankar, Aakash D. and Goudappagouda and Kumari, Divya S. Mohana and Chaubey, Shailendra Kumar and Nayak, Rashmi and Gonnade, Rajesh G. and Kumar, G. V. Pavan and Krishnan, Retheesh and Babu, Sukumaran Santhosh} } @article {46823, title = {"Shape-coding{\textquoteright}{\textquoteright}: morphology-based information system for polymers and composites}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JUN}, pages = {27555-27561}, type = {Article}, abstract = {

Fiber-reinforced composites have become the material of choice for aerospace structures because of their favorable strength-to-weight ratio. Given the increasing amounts of counterfeit composite parts showing up in the complex aerospace supply chain, it is absolutely vital to track a composite part throughout its lifecycle-from production to usage and to disposal. Existing barcoding methods are invasive, affect the structural properties of composites, and/or are vulnerable to tampering. We describe a universal method to store information in fiber-reinforced composites based on solid-state in situ reduction leading to embedded nanoparticles with controlled morphologies. This simple, cost-effective, mild, surfactant-free, and one-step protocol for the fabrication of embedded platinum nanostructures leads to morphology-based barcodes for polymeric composites. We also describe a coding methodology wherein a 1 x 1 cm code can represent 3.4 billion parts to 95 trillion parts, depending on the resolution required along with access to morphology-based chemical encryption systems.

}, keywords = {barcoding chemical encryption, epoxy composites, nanoparticle morphology control, solid-state synthesis}, issn = {1944-8244}, doi = {10.1021/acsami.0c05314}, author = {Pansare, V, Amol and Chhatre, Shraddha Y. and Khairkar, Shyam R. and Bell, Jeffrey G. and Barbezat, Michel and Chakrabarti, Subhananda and Nagarkar, Amit A.} } @article {46749, title = {Silk fibroin 3D microparticle scaffolds with bioactive ceramics: chemical, mechanical, and osteoregenerative characteristics}, journal = {Advanced Engineering Materials}, volume = {22}, year = {2020}, month = {DEC}, pages = {2000458}, type = {Article}, abstract = {

Preparation of 3D scaffolds for bone tissue engineering (BTE) is a challenging task as it requires appropriate pore size and porosities, mechanical properties, and controlled bioerosion rate. The focus of this work is the fabrication of silk fibroin (SF) 3D microparticle scaffolds with the incorporation of hydroxyapatite (HA) and calcium sulfate (CaS) as bioceramics. Physicochemical characterization shows approximate to 30\% filler loading and approximate to 40\% optimum porosity with \>100 mu m pore size for these filled/unfilled scaffolds. Nanoindentation studies show improved Young{\textquoteright}s modulus at microparticle level with the incorporation of bioceramics. SF-HA scaffolds showed three fold increase in Young{\textquoteright}s modulus, whereas SF-CaS showed two fold increase. In vitro bioerosion study results in early bioerosion with SF-CaS scaffold, whereas prolonged bioerosion with SF-HA scaffold. In vitro osteoregenerative potential is analyzed by estimating alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP-2), and osteocalcin (OCN). SF CaS supports early stage differentiation while SF 50\% HA predominantly supports late stage. The expression of TNF-alpha suggests a reduced risk of immune rejection. This work, therefore, concludes that although SF supports bone tissue regeneration, the choice of bioceramic enhances the applicability in various clinical scenarios by providing a controlled bioerosion rate, tunable speed of osteoregeneration, and improved load bearing capacities.

}, keywords = {bioceramics, bioerosion, osteogenic differentiation, Silk fibroin, stem cells}, issn = {1438-1656}, doi = {10.1002/adem.202000458, Early Access Date = AUG 2020}, author = {Parekh, Nimisha A. and Deshpande, V. Rucha and Shukla, Swati G. and Nisal, Anuya A.} } @article {46678, title = {Solvent extraction of butanol from synthetic solution and fermentation broth: batch and continuous studies}, journal = {Separation and Purification Technology}, volume = {249}, year = {2020}, month = {OCT}, pages = {117058}, type = {Article}, abstract = {

Product recovery is one of the essential finishing steps to any commercial fermentation process. In acetone-butanol-ethanol (ABE) fermentation, butanol recovery is quite tedious mainly due to dilute product and multiple byproduct formation in complex media. Among different recovery methods, extraction has attracted considerable attention in biofuel recovery owing to its high selectivity, low energy consumption, and ease of operation. In present work, the butanol extraction performance from synthetic solvent mixture containing ABE was tested in batch and continuous operations using 20\% (v/v) decanol in oleyl alcohol. The optimized extraction conditions were then validated using actual fermentation broth to confirm effectiveness of the extraction operation. The distribution coefficient (K-d) and batch extraction efficiency (E) were in the range of 5.60-9.80 and 87.70-86.90\% for fermentation broth and synthetic solution, respectively for a given initial concentration of butanol in the aqueous phase. Further, E was relatively improved by supplementing different inorganic salts. Sodium hydroxide (5\%, w/v) was highly effective to recover butanol from fermentation broth (E similar to 97.70\%) with K-d of 33.10. Besides, the continuous counter current extraction of butanol in a packed column was performed. The volumetric mass transfer coefficient (kLa) was estimated to be 0.025 1/min at an optimized superficial velocity of the aqueous phase (0.28 cm/min) and sodium hydroxide concentration (5\%, w/v). Height of the extraction column was estimated to be 28.32 cm using height of transfer unit (HTU) and number of transfer unit (NTU) concept for extraction efficiency of 97.20\%. Overall, the present study has demonstrated an enhanced extraction efficiency of butanol from fermentation broth.

}, keywords = {Biobutanol, Equilibrium stages, Height of transfer unit, liquid-liquid extraction, mass transfer coefficient, Number of transfer unit}, issn = {1383-5866}, doi = {10.1016/j.seppur.2020.117058}, author = {Khedkar, Manisha A. and Nimbalkar, Pranhita R. and Gaikwad, Shashank G. and Chavan, V, Prakash and Bankar, Sandip B.} } @article {46636, title = {Structural and physical analysis of underwater silk from housing nest composites of a tropical chironomid midge}, journal = {International Journal of Biological Macromolecules}, volume = {163}, year = {2020}, month = {NOV }, pages = {934-942}, type = {Article}, abstract = {

Chironomids are an abundant group of aquatic silk spinning insects. They offer a unique opportunity of silk harvestation without killing them; however, they remained underappreciated models in silk research. Here, we investigate the structural and biomechanical characteristics of silk from the midge, Chironomus ramosus. A combination of microscopic (SEM), spectroscopic (CD and IR), structural (XRD), thermal (DSC and TGA) and mechanical measurement tools and techniques were employed to gain critical insights on midge silk. Maximum yield of silk was obtained from Chironomus in similar to 2.5 h, the shortest time reported among insects. The network of water-insoluble silk fibres possessed the smallest diameter of 110 +/- 35 nm, known for any insect silk, qualifying its superiority in fibre fineness. We demonstrate a cruelty-free silk extraction method in contrast to the conventional violent techniques. Structural characterization indicated coexistence of various secondary conformations, beta sheets being predominant. We compare and contrast these features to well-characterized caddisfly and silk-worm silks and highlight the uniqueness in midge silk that render mechanical stability and potentially contribute to its multi-functionalization. We thus propose Chironomus as an emerging candidate of water-borne silk, especially in the context of the {\textquoteleft}Peace silk{\textquoteright} industry, aiming to develop non-violent methods for silk harvestation from animals. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {biopolymer, Chironomus, Commercial applications, Housing nest composite, Peace silk, Underwater silk}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.07.070}, author = {Thorat, Leena and Joseph, Emmanuel and Nisal, Anuya and Shukla, Ekta and RaviKumar, Ameeta and Nath, Bimalendu B.} } @article {47312, title = {Synthesis, crystal structure and Hirshfeld surface analysis of the hydrated form of N{\textquoteright}, N-(1,4-phenylenebis(methanylylidene) di(iso-nicotinic hydrazide)}, journal = {Chemical Data Collections}, volume = {28}, year = {2020}, month = {AUG}, type = {Article}, abstract = {

The title compound, C20H16N6O2\ was synthesized by reflux with isonicotinic hydrazide and terephthaldehyde in ethanol solvent with the acidic condition. The single-crystal X-ray structure determination of the title compound,\ N, N-(1,4-phenylene bis (methanylylidene) di(iso-nicotinic hydrazide), reveals that the molecule crystallizes in center of symmetry with water molecules (Dihydrated form, C20H16N6O2.2H2O) through N-H...O and C-H...O hydrogen bondings. Further, the crystal structure is stabilized by O-H...O and weak C-H...N hydrogen bondings with the formation of infinite chain and dimer. Further, surface analysis and fingerprint plot reveal that the significant hydrogen bonding such as H{\textbullet}{\textbullet}{\textbullet}O (15.9\%) and N{\textbullet}{\textbullet}{\textbullet}H (11.4\%) interactions play the most crucial role for its molecular packing.

}, doi = {10.1016/j.cdc.2020.100401}, author = {Ingle, Kapil S. and Mohurle, Smital A. and Bairagi, Keshab M. and Shaikh, Tabrez R. and Venugopala, Katharigatta N. and Chandrashekharappa, Sandeep and Gonnade, Rajesh G. and Nayak, Susanta K.} } @article {46987, title = {Synthesis of deuterated isopentyl pyrophosphates for chemo-enzymatic labelling methods: GC-EI-MS based 1,2-hydride shift in epicedrol biosynthesis (Retraction of Vol 9, Pg 28258, 2019)}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JAN }, pages = {4189}, type = {Retraction}, abstract = {

Retraction of {\textquoteleft}Synthesis of deuterated isopentyl pyrophosphates for chemo-enzymatic labelling methods: GC-EI-MS based 1,2-hydride shift in epicedrol biosynthesis{\textquoteright} by Madhukar S. Said et al., RSC Adv., 2019, 9, 28258-28261.

}, doi = {10.1039/d0ra90009e}, author = {Said, Madhukar S. and Navale, Govinda R. and Gajbhiye, Jayant M. and Shinde, Sandip S.} } @article {46967, title = {Synthesis of ethyl furfuryl ether (potential biofuel) by etherification of furfuryl alcohol with ethanol over heterogenized reusable H1Cs2PW12O40 catalyst}, journal = {Research on Chemical Intermediates}, volume = {46}, year = {2020}, month = {APR}, pages = {2309-2325}, type = {Article}, abstract = {

{Ethyl furfuryl ether (EFE) considered as potential biofuel can replace petroleum diesel up to 100\%. EFE also has efficient blending properties with biodiesel to improve its cold flow properties. Herein we demonstrate efficient synthesis of EFE by etherification of renewable furfuryl alcohol (FAlc) with ethanol over heterogenized heteropoly acids. Cs-exchanged heterogenized heteropoly acid (H3-xCsxPW12O40

}, keywords = {B, etherification, Ethyl furfuryl ether, Furfuryl alcohol, H3-xCsxPW12O40, Heterogenized heteropoly acid, L ration}, issn = {0922-6168}, doi = {10.1007/s11164-020-04093-z, Early Access Date = FEB 2020}, author = {Mulik, Nagesh L. and Niphadkar, Prashant S. and Bokade, Vijay V.} } @article {46770, title = {Template assisted synthesis of Ni,N co-doped porous carbon from Ni incorporated ZIF-8 frameworks for electrocatalytic oxygen reduction reaction}, journal = {New Journal of Chemistry}, volume = {44}, year = {2020}, month = {JUL }, pages = {12343-12354}, type = {Article}, abstract = {

A heteroatom doped porous carbon electrocatalyst with enhanced oxygen reduction reaction (ORR) performance in alkaline medium was obtained by high temperature treatment of Ni incorporated ZIF-8 frameworks and its composite with g-C(3)N(4)as a supporting matrix template. The morphology and porosity of this heteroatom containing carbon were tuned by varying the Ni : Zn molar ratio in Ni/Zn ZIF-8 and Ni/Zn ZIF-8@g-C(3)N(4)composites. The template aided synthetic strategy using g-C(3)N(4)helped in the controlled decomposition of composites leading to a heteroporous sheet like architecture with increased nitrogen content. The Ni/Zn ZIF-8 sample on heat treatment in the 800-1000 degrees C temperature range led to the formation of Ni,N co-doped porous carbon (Ni-NPC) with Ni-C active sites. The defective sites induced by nickel carbide along with the distributed N atoms on the carbon surface enabled active O(2)adsorption sites. The high surface area, high degree of graphitisation as well as the defects created by well dispersed N and Ni on porous carbon matrices favoured charge separation leading to higher electrochemical ORR activity. The Ni,N co-doped carbon catalyst in alkaline medium exhibited a limiting current density of 5.2 mA cm(-2)with a half-wave potential of 0.76 Vvs.RHE in 0.1 M KOH. The catalyst also showed improved methanol tolerance and better stability compared to the standard Pt/C catalyst.

}, issn = {1144-0546}, doi = {10.1039/d0nj01373k}, author = {Priya K., Vaishna and Thomas, Minju and Illathvalappil, Rajith and K., Shijina and Kurungot, Sreekumar and Nair, Balagopal N. and Mohamed, A. Peer and Anilkumar, Gopinathan M. and Yamaguchi, Takeo and Hareesh, U. S.} } @article {46795, title = {Total synthesis of (-)-2-methoxy-2-butenolide-3-cinnamate and its antimicrobial potentials}, journal = {Natural Product Research}, year = {2020}, month = {JUL}, type = {Article; Early Access 2020}, abstract = {

The first total synthesis of (-)-2-methoxy-2-butenolide-3-cinnamate (butenolide cinnamate) was achieved using commercially available starting material. The synthesized compound was found to have promising antibacterial activity against Gram-negative strainsEscherichia coli(ATCC 8739),Salmonella typhimurium(ATCC 23564) andPseudomonas aeruginosa(ATCC 19154) with a minimum inhibitory concentration of 2.0 mu g/mL, 1.0 mu g/mL and 2.0 mu g/mL, respectively. Notably, the compound was more potent against Gram-negative test strains than the Gram-positive test strains.

}, keywords = {antibacterial activity, butenolide cinnamate, Total synthesis}, issn = {1478-6419}, doi = {10.1080/14786419.2020.1789979, Early Access Date = JUL 2020}, author = {Said, Madhukar S. and Udavant, Rohini and Sahu, Amit Kumar and Khan, Abujunaid and Nayak, Rashmi and Dastager, Syed G. and Kumar, Pradeep and Gajbhiye, Jayant} } @article {46984, title = {Tuning phosphorescence features of triphenylamines by varying functional groups and intermolecular interactions}, journal = {Dyes and Pigments}, volume = {173}, year = {2020}, month = {FEB}, pages = {107931}, type = {Article}, abstract = {

Organic room temperature phosphorescent materials are known for their synthetic feasibility, tunable phosphorescence wavelength and lifetime, etc. Hence new design strategies have been applied on various fluorophores to improve phosphorescence features. Among those, triphenylamines are phosphorescence active due to the presence of nitrogen atom, propeller molecular structure, and intermolecular interactions in the crystal state. Here we have studied the room temperature phosphorescence of a series of triphenylamines with various functional groups. Detailed studies have shown that the phosphorescence can be fine-tuned by functional group modification. A long phosphorescence lifetime around 100 ms at room temperature in air can be achieved by the interplay of intermolecular interactions, singlet-triplet energy gap and extent of intersystem crossing using functional group variation. Interestingly, an exciplex assisted ultralong phosphorescence lifetime (more than 20 times) is observed for a combination of triphenylamine and naphthalenemonoimide in air.

}, keywords = {Exciplex, fluorescence, Phosphorescence, triphenylamine}, issn = {0143-7208}, doi = {10.1016/j.dyepig.2019.107931}, author = {Goudappagouda and Asokan, Kiran and Nayak, Rashmi and Krishnan, Retheesh and Babu, Sukumaran Santhosh} } @article {46791, title = {Uncovering the origin of enhanced field emission properties of rGO-MnO(2)heterostructures: a synergistic experimental and computational investigation}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JUL }, pages = {25988-25998}, type = {Article}, abstract = {

The unique structural merits of heterostructured nanomaterials including the electronic interaction, interfacial bonding and synergistic effects make them attractive for fabricating highly efficient optoelectronic devices. Herein, we report the synthesis of MnO(2)nanorods and a rGO/MnO(2)nano-heterostructure using low-cost hydrothermal and modified Hummers{\textquoteright} methods, respectively. Detailed characterization and confirmation of the structural and morphological properties are doneviaX-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM). Compared to the isolated MnO(2)nanorods, the rGO/MnO(2)nano-heterostructure exhibits impressive field emission (FE) performance in terms of the low turn-on field of 1.4 V mu m(-1)for an emission current density of 10 mu A cm(-2)and a high current density of 600 mu A cm(-2)at a relatively very low applied electric field of 3.1 V mu m(-1). The isolated MnO(2)nanorods display a high turn-on field of 7.1 for an emission current density of 10 mu A cm(-2)and a low current density of 221 mu A cm(-2)at an applied field of 8.1 V mu m(-1). Besides the superior FE characteristics of the rGO/MnO(2)nano-heterostructure, the emission current remains quite stable over the continuous 2 h period of measurement. The improvement of the FE characteristics of the rGO/MnO(2)nano-heterostructure can be ascribed to the nanometric features and the lower work function (6.01 and 6.12 eV for the rGO with 8\% and 16\% oxygen content) compared to the isolated alpha-MnO2(100) surface (phi= 7.22 eV) as predicted from complementary first-principles electronic structure calculations based on density functional theory (DFT) methods. These results suggest that an appropriate coupling of rGO with MnO(2)nanorods would have a synergistic effect of lowering the electronic work function, resulting in a beneficial tuning of the FE characteristics.

}, doi = {10.1039/d0ra03360j}, author = {Rondiya, Sachin R. and Karbhal, Indrapal and Jadhav, Chandradip D. and Nasane, Mamta P. and Davies, Thomas E. and Shelke, V. Manjusha and Jadkar, Sandesh R. and Chavan, Padmakar G. and Dzade, Nelson Y.} } @article {47011, title = {Unprecedented isomerism-activity relation in molecular electrocatalysis}, journal = {Journal of Physical Chemistry Letters}, volume = {11}, year = {2020}, month = {JAN }, pages = {263-271}, type = {Article}, abstract = {

The role of electrocatalysts in energy storage/conversion, biomedical and environmental sectors, green chemistry, and much more has generated enormous interest in comprehending their structure-activity relations. While targeting the surface-to-volume ratio, exposing reactive crystal planes and interfacial modifications are time-tested considerations for activating metallic catalysts; it is primarily by substitution in molecular electrocatalysts. This account draws the distinction between a substituent{\textquoteright}s chemical identity and isomerism, when regioisomerism of the -NO2 substituent is conferred at the {\textquoteleft}{\textquoteleft}alpha{\textquoteright}{\textquoteright} and {\textquoteleft}{\textquoteleft}beta{\textquoteright}{\textquoteright} positions on the macrocycle of cobalt phthalocyanines. Spectroscopic analysis and theoretical calculations establish that the beta isomer accumulates catalytically active intermediates via a cumulative influence of inductive and resonance effects. However, the field effect in the alpha isomer restricts this activation due to a vanishing resonance effect. The demonstration of the distinct role of isomerism in substituted molecular electrocatalysts for reactions ranging from energy conversion to biosensing highlights that isomerism of the substituents makes an independent contribution to electrocatalysis over its chemical identity.

}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.9b02689}, author = {Kottaichamy, Alagar Raja and Begum, Shabbah and Nazrulla, Mohammed Azeezulla and Dargily, Neethu Christudas and Devendrachari, Mruthyunjayachari Chattanahalli and Bhat, Zahid Manzoor and Thimmappa, Ravikumar and Kotresh, Harish Makri Nimbegondi and Vinod, Chathakudath Prabhakaran and Thotiyl, Musthafa Ottakam} } @article {46731, title = {Unsymmetrical squaraine dyes for dye-sensitized solar cells: position of the anchoring group controls the orientation and self-assembly of sensitizers on the TiO2 surface and modulates its flat band potential}, journal = {Journal of Physical Chemistry C}, volume = {124}, year = {2020}, month = {AUG}, pages = {18436-18451}, type = {Article}, abstract = {

The position of the anchoring group is systematically changed with a series of alkyl group wrapped donor-acceptor-donor (D-A-D) based squaraine dyes, 4-SQ to 7-SQ, for the use in dye-sensitized solar cells (DSSCs). By this approach, the orientation as well as the self-assembly of the sensitizers can be controlled on the semiconducting TiO2 surface. All of the dyes functionalized with hydrophobic alkyl groups at sp(3)-C and N atoms of the indoline units that is far away from the TiO2 surface to control the self-assembly of dyes and passivate the surface. Controlling both the orientation as well as the self-assembly of the sensitizers synergistically enhances the V-oc of the DSSC device by imparting the dipole moment on the TiO2 surface and minimizing the interfacial charge recombination process of electrons from TiO2 to the oxidized electrolyte, respectively. Further, the presence of a meta-carboxyl group with respect to the N atom of the indoline donor unit for the dyes 4-SQ and 6-SQ makes them nonconductive for the charge injection process, which sheds light on the importance of through-space electron transfer for the device performance. Emission from the relaxed twisted state was found to be a deactivation pathway for 4-SQ on TiO2 and ZrO2, which revealed the importance of structural factors that promote spatial interaction between the sensitizer and metal oxide surface. Computational studies showed the systematic changes in the dipole moment for the sensitizers 4-SQ, 5-SQ, and 6-SQ upon anchoring to the TiO2 surface. The DSSC device performance varied with the position of anchoring groups in the sensitizers. The DSSC device performance of 5-SQ indicates a J(sc) value of 11.35 mA cm(-2), V-oc of 0.698 V, and ff of 77\% corresponding to a power conversion efficiency of 6.08\% in the presence of 3 equiv of coadsorbent CDCA, which is nearly 1.5 times higher than 6-SQ (V-oc 0.7 V, J(sc) 7.76 mA cm(-2), ff 76\%, and eta 4.14\%) and 2.6 times higher than 4-SQ (V-oc 0.658 V, J(sc) 4.42 mA cm(-2), ff 78\%, and eta 2.28\%). IPCE studies revealed the importance of orientation for the charge injection and self-assembly of dyes, as devices with 5-SQ and 6-SQ as a sensitizer showed 94 and 77\% response at 578 nm, respectively, which correspond to the aggregated structure of the dye. Mott-Schottky and IPCE experiments showed that the orientation of sensitizers could modulate the V-oc due to the shift in the flat band potential of TiO2.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.0c05176}, author = {Singh, Ambarish Kumar and Maibam, Ashakiran and Javaregowda, Bharathkumar H. and Bisht, Rajesh and Kudlu, Ashwath and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {46743, title = {Wide thermal range, exclusive occurrence of technically significant chiral nematic phase: synthesis and mesomorphism of cholesterol-based non-symmetric dimers}, journal = {Bulletin of Materials Science}, volume = {43}, year = {2020}, month = {AUG }, pages = {188}, type = {Article}, abstract = {

Fifteen new non-symmetric chiral dimers belonging to three different series have been synthesized and evaluated for their mesomorphic properties. They are formed by interlinking cholesterol with salicylaldimine (SAN) cores (with reverse imine groups) via an omega-oxyalkanoyloxy spacer. Within a series, the length of the terminaln-alkoxy tails has been varied for a fixed even-parity spacer. Three even-parity spacers such as 4-oxybutanoyloxy, 6-oxyhexanoyloxy and 8-oxyoctanoyloxy have been used to join two cores, whereas the terminal tails such asn-butyloxy,n-hexyloxy,n-octyloxy,n-decyloxy andn-dodecyloxy chains have been attached to the SAN core. Microscopic and calorimetric experimental results show that all the dimers behave identically exhibiting the chiral nematic (N*) phase solely, which was authenticated by powder X-ray diffraction studies carried out on some selected samples. In the vast majority of the cases, this phase is thermodynamically stable, and while cooling, it exists over a wide thermal range covering room temperature (RT) due to supercooling. This finding is notable given the fact that the N* phase possesses technologically significant optical properties. At RT, the N* phase displayed one of the iridescent colours characteristically caused by interference and diffraction of the reflected and scattered light. A comparative study reveals that the lengths of both the terminal chain and central spacer influence the clearing temperature of the dimers, and also the temperature range of the N* phase. The selective reflection measurements revealed that the pitch of the N* phase is either temperature sensitive or temperature insensitive. Temperature-dependent circular dichroism (CD) spectra were recorded for the planar texture of the N* phase formed by a dimer, as a representative case. The presence of an intense negative CD band suggests the left-handed screw sense of the N* phase helix.

}, keywords = {CD activity, cholesteric phase, dimers, liquid crystals, selective reflection}, issn = {0250-4707}, doi = {10.1007/s12034-020-02120-8}, author = {Nayak, Rashmi Ashwathama and Bhat, Sachin A. and Rao, D. S. Shankar and Yelamaggad, V. C.} } @article {47711, title = {Accurate identification of bioactive meliaceae limonoids by UHPLC-MS/ms based structure-fragment relationships (SFRs)}, journal = {ACS Omega}, volume = {6}, year = {2021}, month = {OCT }, pages = {26454-26476}, type = {Article}, abstract = {Y Limonoids are bioactive plant specialized metabolites found in the Meliaceae family. The basic limonoids, i.e., azadiradione, epoxyazadiradione, and gedunin have been exploited for various bioactivities and therefore are the potential drug leads for tomorrow. However, their low abundance, structural similarity, and lack of adequate mass fragmentation data have hampered their accurate identification and quantification from various sources. In the present study, basic limonoids such as azadirone, azadiradione, epoxyazadiradione, and gedunin isolated from Neem were utilized for the synthesis of their derivatives and isotopologs. A total of 30 one compounds were used in this study among which five were isolated, two were biotransformed, and 24 were synthesized. Among the synthesized compounds nine are novel compounds including six deuterated analogs/isotopologs which are (1,3-H-2)-1,2dihydro-3 beta-hydroxyazadiradione (9), (1,3,16-H-2)-1,2-dihydro-3 beta-16 beta-dihydroxyazadiradione (10), 3 beta-hydroxyazadiradione (11), 3 beta-16 beta-dihydroxyazadiradione (12), (3-H-2)-3 beta-hydroxyazadiradione (13), (3,16-H-2)-3 beta-16 beta-dihydroxyazadiradione (14), (1,3,7-H-2)-1,2-dihydro-3 beta-hydroxy-7-deacetylazadiradione (15), 1,2,20,21,22,23-hexahydroazadiradione (17), and (1,3-H-2)-1,2-dihydro-3 beta-hydroxygedunin (29). These limonoids along with their semisynthesized derivatives were subjected to ultra high performance liquid chromatography mass spectrometry (UHPLC-MS/MS) and the fragmentation pathway was established based on structure-fragment relationships (SFRs), utilizing high resolution MS/MS data. We have developed a most reliable and easily reproducible protocol describing in depth analysis of SFRs based on the structural modifications and synthesis of isotopologs. Also, the MS/MS fragment library of these basic limonoids generated in this study acts as a fingerprint for accurate identification and quantification of limonoids by MS/MS analysis in various plant tissue extracts, phytopharmaceutical formulations and biological samples.}, issn = {2470-1343}, doi = {10.1021/acsomega.1c03697}, author = {Mulani, Fayaj A. and Nandikol, Sharvani S. and Haldar, Saikat and Thulasiram, V, Hirekodathakallu} } @article {47686, title = {Active and recyclable gold metal nanoparticles catalyst supported on nitrogen-doped mesoporous carbon for chemoselective hydrogenation of cinnamaldehyde to cinnamyl alcohol}, journal = {Chemistry-An Asian Journal}, volume = {16}, year = {2021}, month = {SEP }, pages = {2702-2722}, type = {Article}, abstract = {Several supported gold metal catalysts with different Au nanoparticles sizes were prepared and evaluated for the chemoselective hydrogenation of cinnamaldehyde (CA) to cinnamyl alcohol (CAL). To investigate the structure-activity relationship, stability of catalyst, heterogeneity and recyclability, the structural characteristics of materials and Au catalysts (fresh and spent catalysts) were studied by employing variety of physico-chemical techniques. The interrelationship among Au nanoparticles size (nm) with turnover frequency (h(-1)) of Au catalysts has also been explored. Among the various Au catalysts tested, nitrogen-doped mesoporous carbon (NMC) supported Au catalyst having homogeneously dispersed (78.8\%) Au nanoparticles (1.6 nm) synthesized by sol-immobilization method (Au-NMC-SI) demonstrated improved catalytic activity affording 78\% CAL selectivity and 94.2\% CA conversion without using any promoter. Moreover, Au-NMC-SI catalyst exhibited good recyclability and stability. The catalyst synthesis approach described in this investigation opens up a novel strategy for the design of highly efficient metal nano-catalysts supported on NMC materials.}, keywords = {Au Nanoparticles, heterogeneous catalysis, Hydrogenation, Nitrogen-doped mesoporous carbon, Support-Metal interaction}, issn = {1861-4728}, doi = {10.1002/asia.202100552}, author = {Nagpure, Atul S. and Gogoi, Pranjal and Chilukuri, Satyanarayana V.} } @article {47585, title = {Active nickel hollow nanosphere supported over SiO2 catalyst for reduction of nitro compound}, journal = {Particulate Science and Technology}, volume = {40}, year = {2021}, month = {APR}, pages = {325-335}, type = {Article}, abstract = {

Nickel hollow nanospheres (Ni HNSs) was prepared by solvothermal method using mixture of ethylenediamine (EN) and ethanol (ET), sodium borohydride as reducing agent and nickel chloride hexahydrate as precursor. The particle size of the Ni HNSs were tuned by varying several parameters including precursor concentrations, reaction temperatures (130-190 degrees C), and ET to EN volume ratios. The particle size and morphology of Ni HNSs were confirmed by dynamic light scattering and transmission electron microscope, respectively. Spherical shape of Ni nanoparticles of 300 nm size having similar to 200 nm hollow space and 50 nm thickness was achieved at optimize condition of 4:6 volume ratio of ET/EN, 150 degrees C temperature, 0.1 M NaBH4 concentration, and 7 h. Ni HNSs supported over SiO2 (Ni HNSs/SiO2) with different loading of Ni HNSs (1-10 wt.\%) were prepared by impregnation method. The catalyst was characterized by X-ray diffraction, and inductively coupled plasma - optical emission spectroscopy. The catalytic performance of Ni HNSs/SiO2 was carried out in the reduction of 4-Nitrophenol (4-NP) to 4 - Aminophenol (4-AP). 5 wt.\% Ni HNSs/SiO2 exhibited 87\% reduction of 4-NP in 25 min and stable up to 6 catalyst cycles due to higher surface area of the catalyst.

}, keywords = {4-Aminophenol, 4-nitrophenol, Catalyst, hollow nanospheres, Nanoparticles, Nickel}, issn = {0272-6351}, doi = {10.1080/02726351.2021.1947424}, author = {Pawar, Priyanka S. and Lokhande, Aboli A. and Nandanwar, Sachin U. and Niphadkar, Prashant S. and Bokade, Vijay V.} } @article {47078, title = {Aggregation-induced phosphorescence of an anthraquinone based emitter}, journal = {Organic \& Biomolecular Chemistry}, volume = {19}, year = {2021}, month = {FEB }, pages = {1004-1008}, type = {Article}, abstract = {

Room temperature phosphorescence (RTP) of metal-free organic molecules is a hot topic of current research interest. RTP can be enhanced through aggregation, crystallization, and the support of polymers and host-guest assemblies. The characteristics of highly phosphorescent aggregates formed from conventional chromophores make them ideal candidates for many potential applications. In this direction, we focused on the aggregation-induced phosphorescence of an anthraquinone derivative AqC6 in solution and in crystal state. The weakly emissive dilute solution exhibits a tunable emission with enhanced intensity and room temperature phosphorescence by increasing the concentration and solvent-antisolvent combination. The enhanced phosphorescence of crystals has been recreated in the solution by making use of aggregation. Interestingly, the support of PMMA enabled AqC6 to achieve enhanced processability, phosphorescence lifetime (174 ms) and quantum yield (5\%).

}, issn = {1477-0520}, doi = {10.1039/d0ob02505d}, author = {Goudappagouda and Nidhankar, Aakash D. and Nayak, Rashmi A. and Babu, Sukumaran Santhosh} } @article {47789, title = {Amphiphilic indoline-based unsymmetrical squaraine dyes for dye-sensitized solar cells: modulating the dye-TiO2/electrolyte interface for nonaqueous and aqueous electrolytes}, journal = {ACS Applied Energy Materials}, volume = {4}, year = {2021}, month = {NOV}, pages = {13932-13942}, type = {Article}, abstract = {A high molar extinction coefficient with sharp absorption properties from the range of visible to near-infrared regions makes squaraine dyes very attractive and potential chromophores for dye-sensitized solar cell (DSSC) applications. Here, we report a series of alkyl groups and glycolic chain [triethylene glycol (TEG)]-wrapped amphiphilic indoline-based unsymmetrical squaraine dyes, where the number of carbon atoms in the alkyl groups and TEG was systematically changed by incorporating the alkyl groups and TEG within the dye molecule for controlling the self-assembly of the dyes on the TiO2 surface and to improve the interfacial properties at the dye-TiO2/electrolyte interface. Due to the same skeletal characteristics, ASQ dyes showed similar photophysical and electrochemical properties in solution. Photovoltaic characterization of ASQ dyes was carried out in nonaqueous and aqueous electrolytes to evaluate the effect of alkyl groups and TEG on nonaqueous and aqueous DSSC device performances. VOC, JSC, and photovoltaic efficiencies were systematically enhanced by increasing the number of carbon atoms of alkyl groups into the dye molecules for nonaqueous DSSCs. Furthermore, addition of chenodeoxycholic acid (CDCA) decreased the charge recombination processes and resulted in enhanced efficiency, VOC, and JSC (enhanced incident photon-to-current conversion efficiency performance) compared to that without CDCA. The ASQ4 dye gave the highest nonaqueous DSSC efficiency of 6.39\%, a VOC of 711 mV, and a JSC of 12.18 mA/cm2 with 2 equiv of CDCA in the ASQ dye series. Furthermore, increased carbon atoms in the alkyl groups showed a detrimental effect on the aqueous DSSC efficiency due to the mismatch in the polarity at the dye-TiO2/electrolyte interface, being the reason for the decreased device efficiencies from ASQ2 to ASQ4 dyes. The ASQ2 dye gave the highest aqueous DSSC efficiency of 2.36\%, a VOC of 611 mV, and a JSC of 4.75 mA/cm2 without CDCA in the ASQ dye series.}, doi = {10.1021/acsaem.1c02733}, url = {https://doi.org/10.1021/acsaem.1c02733}, author = {Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {47367, title = {Amyloid-beta-derived peptidomimetics inhibits tau aggregation}, journal = {ACS Omega }, volume = {6}, year = {2021}, month = {MAY }, pages = {11131-11138}, type = {Article}, abstract = {

The aggregation of tau protein is one of the hallmarks for Alzheimer{\textquoteright}s disease, resulting in neurodegeneration. The peptidomimetics strategy to prevent tau aggregation is more specific over other small molecules. In the present study, we analyzed the effect of amyloid-beta-derived peptidomimetics for inhibiting heparin-induced tau aggregation in vitro. These peptides and their derivatives were known to prevent aggregation of amyloid-beta. KLVFF is a hydrophobic sequence of the pentapeptide that prevented tau aggregation as observed by thioflavin S fluorescence, transmission electron microscopy, and circular dichroism spectroscopy. P4 and P5 also prevented assembly of tau into aggregates and formed short fibrils. The beta-sheet breaker LPFFD was however ineffective in preventing tau aggregation. The peptides further demonstrated reversal of tau-induced cytotoxicity in a dose-dependent manner. Our results suggested that these peptides can also be used to inhibit tau aggregation and also, toxicity induced by tau could be considered as potential molecules that have an effect on tau as well as amyloid-beta.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b03497}, author = {Gorantla, V. Nalini and Sunny, Lisni P. and Rajasekhar, Kolla and Nagaraju, Pramod G. and Priyadarshini, Poornima C. G. and Govindaraju, Thimmaiah and Chinnathambi, Subashchandrabose} } @article {47121, title = {Antisolvent based ultrasound-assisted batch and continuous flow precipitation of metformin hydrochloride particles}, journal = {Journal of Flow Chemistry}, volume = {11}, year = {2021}, month = {JUN}, pages = {181-192}, type = {Article}, abstract = {

Small sized particles of the antidiabetic drug metformin hydrochloride (MET.HCl) were produced by antisolvent based precipitation using an ultrasound assisted inverted jet reactor (IJR). This novel approach was implemented as a small passive mixer in which intensified turbulent mixing of the solution and the antisolvent occurred under controlled conditions. The optimized conditions for antisolvent precipitation (ASP) were investigated by studying the effect of solute concentration, antisolvent to solvent ratio and antisolvent temperature in batch systems. The optimized batch precipitation conditions were successfully translated into continuous flow process for the ultrasound assisted inverted jet reactor. The ability of the proposed clogging free inverted jet reactor approach can provide a scaled up alternative pathway to micro and millifluidic devices for manufacturing of small sized API particles, such as, MET.HCl for the formulations and encapsulations on an industrial scale.

}, keywords = {Continuous antisolvent precipitation, Jet-reactor, Metformin, supersaturation, Ultrasound}, issn = {2062-249X}, doi = {10.1007/s41981-020-00137-y, Early Access Date = JAN 2021}, author = {Pal, Sayan and Nikam, Arun V. and Kulkarni, Amol A.} } @article {47600, title = {Aqueous methanol to formaldehyde and hydrogen on Pd/TiO2 by photocatalysis in direct sunlight: structure dependent activity of nano-Pd and atomic Pt-coated counterparts}, journal = {ACS Applied Energy Materials}, volume = {4}, year = {2021}, month = {NOV }, pages = {13347-13360}, type = {Article}, abstract = {In the present investigation, facet-controlled Pd nanoparticles with nanocube (Pd-NC) and truncated octahedron (Pd-TO) morphologies, and their counterparts with half-a-monolayer of atomic Pt coated (0.5 theta(Pt)-Pd-NC and 0.5 theta(Pt)-Pd-TO) surfaces were prepared. All of them were characterized and evaluated as cocatalyst after supporting them on commercial titania (P25) (Pd-NC/P25, Pd-TO/P25, 0.5 theta(Pt)-Pd-NC/P25, and 0.5 theta(Pt)-Pd-TO/P25) under direct sunlight and/or one sun conditions for the oxidation of methanol to formaldehyde along with solar hydrogen production. Pd-NC/P25 shows higher activity for hydrogen generation compared to Pd-TO/P25; however, activity reversal occurs with the above cocatalysts, but, after Pt-coating with further enhanced activity. The highest conversion of methanol (0.2 mu mol/h.mg) to 100\% selective formaldehyde was observed with 0.5 theta(Pt)-Pd-TO/P25, while other catalysts show significantly lower methanol conversion in the following order: 0.5 theta(Pt)-Pd-TO/P25 > 0.5 theta(Pt)-Pd-NC/P25 > Pd-NC/P25 > Pd-TO/P25. Pt-coated on (111) facets of Pd-TO simulates the activity associated as that of Pt(111) facets and demonstrating the highest and facet dependent activity. The present study is truly in resonance with exploiting the surface properties for heterogeneous catalysis, and highlights that less than a monolayer of Pt is sufficient to simulate the activity as that of bulk Pt. It is worth exploring this concept to other metals and substrates too.}, keywords = {heterogeneous catalysis, Nanomaterials, Oxidation, Photocatalysis, surface modification}, issn = {2574-0962}, doi = {10.1021/acsaem.1c03080}, author = {Nalajala, Naresh and Salgaonkar, Kranti N. and Chauhan, Inderjeet and Mekala, Siva Prasad and Gopinath, Chinnakonda S.} } @article {47452, title = {Aspergillus derived mycotoxins in food and the environment: prevalence, detection, and toxicity}, journal = {Toxicology Reports }, volume = {8}, year = {2021}, month = {JAN}, pages = {1008-1030}, type = {Article}, abstract = {

Aspergillus\ species are the paramount ubiquitous fungi that contaminate various food substrates and produce biochemicals known as mycotoxins. Aflatoxins (AFTs), ochratoxin A (OTA), patulin (PAT), citrinin (CIT), aflatrem (AT), secalonic acids (SA), cyclopiazonic acid (CPA), terrein (TR), sterigmatocystin (ST) and gliotoxin (GT), and other toxins produced by species of\ Aspergillus\ plays a major role in food and human health. Mycotoxins exhibited wide range of toxicity to the humans and animal models even at nanomolar (nM) concentration. Consumption of detrimental mycotoxins adulterated foodstuffs affects human and animal health even trace amounts. Bioaerosols consisting of spores and hyphal fragments are active elicitors of bronchial irritation and allergy, and challenging to the public health.\ Aspergillus\ is the furthermost predominant environmental contaminant unswervingly defile lives with a 40{\textendash}90 \% mortality risk in patients with conceded immunity. Genomics, proteomics, transcriptomics, and metabolomics approaches useful for mycotoxins{\textquoteright} detection which are expensive. Antibody based detection of toxins chemotypes may result in cross-reactivity and uncertainty. Aptamers (APT) are single stranded DNA (ssDNA/RNA), are specifically binds to the target molecules can be generated by systematic evolution of ligands through exponential enrichment (SELEX). APT are fast, sensitive, simple, in-expensive, and field-deployable rapid point of care (POC) detection of toxins, and a better alternative to antibodies.

}, doi = {10.1016/j.toxrep.2021.04.013}, author = {Navale, Vishwambar and Vamkudoth, Koteswara Rao and Ajmera, Shanthipriya and Dhuri, Vaibhavi} } @article {47791, title = {Autophagic pathways to clear the tau aggregates in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, volume = {41}, year = {2021}, month = {AUG}, pages = {1175-1181}, abstract = {Tau is a microtubule-associated protein with an intrinsically unstructured conformation. Tau is subjected to several pathological post-translational modifications (PTMs), leading to its loss of interaction with microtubules and accumulation as neurofibrillary tangles (NFTs) in neurons. Tau aggregates impede functions of endoplasmic reticulum and mitochondria leading to the generation of oxidative stress and in turn amplifying the Tau aggregation. Tau is channelled to chaperones for folding into their native form, which otherwise causes its degradation and clearance. Cellular response triggers the activation of ubiquitin{\textendash}proteasome system or autophagy to facilitate Tau degradation, based on the PTMs or mutations associated with Tau. Further, autophagy can be selective where Hsc70 interacts with Tau in monomeric, oligomeric and aggregated form and drives its clearance by chaperone-mediated autophagy pathway (CMA). Lysosome-associated membrane proteins-2A (LAMP-2A) is the key player of CMA that recognises Hsc70-Tau complex and triggers the downstream cascade. Thus, it becomes challenging for mutant Tau to be cleared by CMA as it loses its affinity for Hsc70 and LAMP-2A. In such a scenario, Tau might be degraded by macroautophagy otherwise sequestered by aggresomes. Henceforth, the degradation of Tau and its blockage that is associated with various PTMs of Tau would explain the dynamics of Tau degradation or accumulation in AD. Further, unveiling the role of accessory proteins involved in these degradation pathways would help in understanding their loss of function and preventing Tau clearance. }, doi = {10.1007/s10571-020-00897-0}, author = {vijay nalini, Gorantla and Chinnathambi, Subashchandrabose} } @article {46754, title = {Bimetallic Ni-Pd synergism-mixed metal catalysis of the mizoroki-heck reaction and the suzuki-miyaura coupling of aryl bromides}, journal = {Catalysis Letters}, volume = {151}, year = {2021}, month = {FEB}, pages = {353-358}, type = {Article}, abstract = {

A combination of Pd and Ni complexes activated aryl bromides for the thermal Mizoroki-Heck reaction and Suzuki coupling giving high yields in short reaction times. A thermal redox mechanism probably occurs whereby Ni complex transfers electron and reduces the Pd (II) to Pd (0) which then takes the reactants through the standard protocol of oxidative-addition, migratory insertion and reductive elimination, typical for the Mizoroki-Heck reaction and the Suzuki coupling. [GRAPHICS] .

}, keywords = {Bimetallic catalysis, Mizoroki-Heck, Nickel complexes, Pd(OAc)2, Suzuki coupling}, issn = {1011-372X}, doi = {10.1007/s10562-020-03330-9, Early Access Date = AUG 2020}, author = {Kashid, Abhijit A. and Patil, Dharmaraj J. and Mali, Ramling D. and Patil, Vijay P. and Neethu, T. V. and Meroliya, Heena K. and Waghmode, Shobha A. and Iyer, Suresh} } @article {47794, title = {Bimetallic Ni{\textendash}Pd synergism{\textemdash}mixed metal catalysis of the mizoroki-heck reaction and the suzuki{\textendash}miyaura coupling of aryl bromides}, journal = {Catalysis Letters}, volume = {151}, year = {2021}, month = {FEB}, pages = {353 - 358}, type = {Article}, abstract = {A combination of Pd and Ni complexes activated aryl bromides for the thermal Mizoroki-Heck reaction and Suzuki coupling giving high yields in short reaction times. A thermal redox mechanism probably occurs whereby Ni complex transfers electron and reduces the Pd (II) to Pd (0) which then takes the reactants through the standard protocol of oxidative-addition, migratory insertion and reductive elimination, typical for the Mizoroki-Heck reaction and the Suzuki coupling.}, isbn = {1572-879X}, doi = {10.1007/s10562-020-03330-9}, author = {Kashid, Abhijit A. and Patil, Dharmaraj J. and Mali, Ramling D. and Patil, Vijay P. and Neethu, T. V. and Meroliya, Heena K. and Waghmode, Shobha A. and Iyer, Suresh} } @article {46671, title = {Biological process of lysine-tRNA charging is therapeutically targetable in liver cancer}, journal = {Liver International}, volume = {41}, year = {2021}, month = {JAN }, pages = {206-219}, type = {Article }, abstract = {

Background \& Aims Mature transfer RNAs (tRNA) charged with amino acids decode mRNA to synthesize proteins. Dysregulation of translational machineries has a fundamental impact on cancer biology. This study aims to map the tRNAome landscape in liver cancer patients and to explore potential therapeutic targets at the interface of charging amino acid with tRNA. Methods Resected tumour and paired tumour-free (TFL) tissues from hepatocellular carcinoma (HCC) patients (n = 69), and healthy liver tissues from organ transplant donors (n = 21), HCC cell lines, and cholangiocarcinoma (CC) patient-derived tumour organoids were used. Results The expression levels of different mature tRNAs were highly correlated and closely clustered within individual tissues, suggesting that different members of the tRNAome function cooperatively in protein translation. Interestingly, high expression of tRNA-Lys-CUU in HCC tumours was associated with more tumour recurrence (HR 1.1;P = .022) and worse patient survival (HR 1.1;P = .0037). The expression of Lysyl-tRNA Synthetase (KARS), the enzyme catalysing the charge of lysine to tRNA-Lys-CUU, was significantly upregulated in HCC tumour tissues compared to tumour-free liver tissues. In HCC cell lines, lysine deprivation, KARS knockdown or treatment with the KARS inhibitor cladosporin effectively inhibited overall cell growth, single cell-based colony formation and cell migration. This was mechanistically mediated by cell cycling arrest and induction of apoptosis. Finally, these inhibitory effects were confirmed in 3D cultured patient-derived CC organoids. Conclusions The biological process of charging tRNA-Lys-CUU with lysine sustains liver cancer cell growth and migration, and is clinically relevant in HCC patients. This process can be therapeutically targeted and represents an unexplored territory for developing novel treatment strategies against liver cancer.

}, keywords = {Cladosporin, liver cancer, lysine, Lysyl-tRNA Synthetase, tRNA-Lys-CUU, tRNAome}, issn = {1478-3223}, doi = {10.1111/liv.14692}, author = {Zhang, Ruyi and Noordam, Lisanne and Ou, Xumin and Ma, Buyun and Li, Yunlong and Das, Pronay and Shi, Shaojun and Liu, Jiaye and Wang, Ling and Li, Pengfei and Verstegen, Monique M. A. and Reddy, D. Srinivasa and van Der Laan, Luc J. W. and Peppelenbosch, Maikel P. and Kwekkeboom, Jaap and Smits, Ron and Pan, Qiuwei} } @article {47084, title = {Can we identify the salt-cocrystal continuum state using XPS?}, journal = {Crystal Growth \& Design}, volume = {21}, year = {2021}, month = {FEB }, pages = {735-747}, type = {Article}, abstract = {

X-ray photoelectron spectroscopy (XPS) is used to understand the nature of acid-base crystalline solids, to know whether the product is a salt (proton transfer, O-center dot center dot center dot H-N+) or a cocrystal (neutral adduct, O-H center dot center dot center dot N). The present study was carried out to explore if intermediate states of proton transfer from COOH to nitrogen (the proton resides between hydrogen bonded to O and N, O center dot center dot center dot H center dot center dot center dot N, quasi state) can be differentiated from a salt (complete proton transfer, N+-H center dot center dot center dot center dot O-) and cocrystal (no proton transfer, O-H center dot center dot center dot N) using N 1s XPS spectroscopy. The intermediate states of proton transfer arise when the pK(a) difference between the acid and the conjugate base is between -1 and 4, -1 \< Delta pK(a) \< 4, a situation common with COOH and pyridine functional groups present in drug molecules and pharmaceutically acceptable coformers. Complexes of pyridine N bases with aromatic COOH molecules in nine salts/cocrystals were cocrystallized, and their N 1s core binding energies in XPS spectra were measured. The proton state was analyzed by single-crystal X-ray diffraction for confirmation. Three new complexes were crystallized and analyzed by XPS spectra (without knowledge of their X-ray structures), to assess the predictive ability of XPS spectra in differentiating salt-cocrystal intermediate states against the extremities. The XPS results were subsequently confirmed by single-crystal X-ray data. Complexes of 3,5-dinitrobenzoic acid and isonicotinamide in 1:1 and 1:2 ratios exist as a salt and a salt-cocrystal continuum, respectively, as shown by the N 1s core binding energies. The proton states of the crystalline solids by XPS are in good agreement with the corresponding crystal structures. Other complexes, such as those of 3,5-dinitrobenzoic acid with 1,2-bis(4-pyridyl)ethylene, exhibit a salt-cocrystal continuum, maleic acids with 1,2-bis(4-pyridyl)ethylene and acridine are salts, 2-hydroxybenzoic acid and acridine is a salt, and the complex of 3,5-dinitrobenzoic acid and 3-hydroxypyridine is a salt and salt-cocrystal continuum, while fumaric acids with 1,2-bis(4-pyridyl)ethylene and acridine are cocrystals. Furthermore, three new acidbase complexes of 3,5-dinitrobenzoic acid with phenazine, 4-hydroxypyridine, and 4-cyanopyridine were studied initially by XPS and then confirmed by X-ray diffraction. In summary, since the N 1s binding energies cluster in a narrow range as cocrystals (398.7-398.9 eV) and salts (400.1-401.1 eV), it is clearly possible to differentiate between cocrystals and salts, but the saltcocrystal continuum values in XPS spectra are clustered in an intermediate range of cocrystals and salts but overlap with those of cocrystal or salt binding energies.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.0c00661}, author = {Tothadi, Srinu and Shaikh, Tabrez Rafique and Gupta, Sharad and Dandela, Rambabu and Vinod, Chathakudath P. and Nangia, Ashwini K.} } @article {47045, title = {Chemistry, anti-diabetic activity and structural analysis of substituted dihydropyrimidine analogues}, journal = {Journal of Molecular Structure}, volume = {1227}, year = {2021}, month = {MAR }, pages = {129412}, type = {Article}, abstract = {

In an effort to identify an anti-diabetic agent, a series of methyl/ethyl 4-(hydroxyphenyl)-6-methyl-2-oxo/thioxo-1,2,3,4 tetrahydropyrimidine-5-carboxylate analogues (4a-h) have been synthesized, purified, and characterized by using Fourier-Transform Infrared Spectroscopy (FT-IR) and NMR (H-1 and C-13). The synthesized compounds were screened for anti-hyperglycemic activity using Streptozotocin (STZ) induced diabetic rat model. The anti-hyperglycemic activity of dihydropyrimidine (DHPM) compound is mainly analyzed with the variation of substituents present on the phenyl ring and urea/thiourea group on pharmacophoric features. Further, the crystal structure and supramolecular characteristics of two compounds 4c and 4f were analyzed through a single-crystal X-ray method and the Hirshfeld Surface Analysis, which shows hydrogen bonding through N-H center dot center dot center dot O and N-H center dot center dot center dot S interactions with the formation of ring motif in the crystal structure. It is interesting to note that among the title compounds, the 4a, 4e, 4f, and 4g significantly displayed a better hypoglycemic effect in vivo rat model study. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Dihydropyrimidine (DHPM), Hypoglycemia, Streptozotocin (STZ), Type-2 diabetes mellitus (T2DM)}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2020.129412}, author = {Bairagi, Keshab M. and Younis, Nancy Safwat and Emeka, Promise Madu and Venugopala, Katharigatta N. and Alwassil, I, Osama and Khalil, Hany Ezzat and Sangtani, Ekta and Gonnade, Rajesh G. and Mohanlall, Viresh and Nayak, Susanta K.} } @article {47796, title = {Cobalt recovery from spent Li-ion batteries using lactic acid as dissolution agent}, journal = {Cleaner Engineering and Technology}, volume = {3}, year = {2021}, month = {JUL}, pages = {100122}, type = {Article}, abstract = {The effective recovery of cobalt from spent cathode materials is a critical issue and becomes a necessary assignment for the waste treatment of spent lithium-ion batteries (LIBs) in concern with waste to wealth. The dissolution process encompasses an organic acid leaching followed by recovery of pure Co oxalate. The use of lactic acid effectively improves the leaching of spent LiCoO2 materials with ascorbic acid. The leaching efficiencies of 99\% for Li and 98\% for Co were achieved under the optimal condition of 0.5~mol/L lactic acid and 0.02~mol/L ascorbic acid, solid/liquid ratio of 2~g/L, leaching time of 360~min and temperature of 90~{\textdegree}C. Based on the kinetic analysis, the enhancement leaching process is mainly on the concentration of dissolution reagent. Compared to other organic acids used previously, lactic acid showed better dissolution behavior.}, keywords = {Cathode recycling, Kinetic analysis, Lactic acid, Spent Li-ion batteries}, issn = {2666-7908}, doi = {10.1016/j.clet.2021.100122}, author = {G. Santhosh and G.P. Nayaka} } @article {47712, title = {Colchicine induces tetraploids in in vitro cultures of digitalis lanata Ehrh.: enhanced production of biomass and cardiac glycosides}, journal = {Industrial Crops and Products}, volume = {174}, year = {2021}, month = {DEC}, pages = {114167}, type = {Article}, abstract = {This study describes a promising method for tetraploidy induction in the in vitro grown diploid shoots of the cardiotonic herb Digitalis lanata by colchicine treatment to obtain a higher content of the cardiac glycosides{\textquoteright} digoxin and digitoxin. The best frequency of tetraploids (33 \%) induction was observed with 0.5 \% colchicine treatment for 8 h. The content of digoxin and digitoxin in the tetraploids increased by 1.61-fold and 1.73-fold over the control diploids respectively. The higher cardiotonic glycoside production in the tetraploid plants of D. lanata have the potential to satisfy the increasing demand of superior plant material for pharmaceutical industries.}, keywords = {Cardiac glycosides, Colchicine induced polyploidy, Digitalis lanata, Digitoxin, Digoxin}, issn = {0926-6690}, doi = {10.1016/j.indcrop.2021.114167}, author = {Bhusare, B. P. and John, C. K. and Bhatt, V. P. and Nikam, T. D.} } @article {47043, title = {Connecting real glasses to mean-field models}, journal = {Journal of Chemical Physics}, volume = {154}, year = {2021}, month = {MAR}, pages = {094506}, type = {Article}, abstract = {

We propose a novel model for a glass-forming liquid, which allows us to switch in a continuous manner from a standard three-dimensional liquid to a fully connected mean-field model. This is achieved by introducing k additional particle-particle interactions, which thus augments the effective number of neighbors of each particle. Our computer simulations of this system show that the structure of the liquid does not change with the introduction of these pseudo-neighbors and by means of analytical calculations, and we determine the structural properties related to these additional neighbors. We show that the relaxation dynamics of the system slows down very quickly with the increase in k and that the onset and the mode-coupling temperatures increase. The systems with high values of k follow the mode-coupling theory power law behavior for a larger temperature range compared to the ones with lower values of k. The dynamic susceptibility indicates that the dynamic heterogeneity decreases with the increase in k, whereas the non-Gaussian parameter is independent of it. Thus, we conclude that with the increase in the number of pseudo-neighbors, the system becomes more mean-field-like. By comparing our results with previous studies on mean-field-like systems, we come to the conclusion that the details of how the mean-field limit is approached are important since they can lead to different dynamical behavior in this limit.

}, issn = {0021-9606}, doi = {10.1063/5.0038749}, author = {Nandi, Ujjwal Kumar and Kob, Walter and Bhattacharyya, Sarika Maitra} } @article {47381, title = {D-A-D based complementary unsymmetrical squaraine dyes for co-sensitized solar cells: enhanced photocurrent generation and suppressed charge recombination processes by controlled aggregation}, journal = {ACS Applied Energy Materials}, volume = {4}, year = {2021}, month = {APR}, pages = {3182-3193}, type = {Article}, abstract = {

A series of donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes have been synthesized with indoline and aniline as donor units. The sp(3)-C, N atoms of the indoline and N atom of the aniline donors are appended with alkyl groups systematically to control the self-assembly of dyes on TiO2 and to passivate the photoanode that helps in improving the open circuit voltage (V-oc) of the dye-sensitized solar cell (DSSC) device. The resulting dyes, AK1-4, possess strong absorptions between 529 and 541 nm with extinction coefficients of 1.44-1.84 X 10(5) M-1 cm(-1). Photophysical and electrochemical studies revealed that the lowest unoccupied molecular orbital and highest occupied molecular orbital of the dyes are aligned with the conduction band of TiO2 and the redox function of the electrolyte for the efficient charge injection and dye regeneration processes, respectively. A DSSC device performance for AK4 of 7.93\% (V-oc of 815.88 mV and short circuit current density (J(sc)) of 12.4 mA/cm(2)) is obtained, with an incident photon to current conversion efficiency (IPCE) response of 92\% at 473 nm and 86\% at 566 nm without sensitizing with coadsorbent. IPCE studies revealed the equal contribution for the photocurrent generation from the H-aggregated structures. Further, such a high V-oc and DSSC efficiency have been observed first time for this class of zwitterionic dyes with the I-/I-3(-) electrolyte without sensitizing with coadsorbent. The importance of introducing the alkyl groups at the indoline as well as aniline donor units for the synergistic boosting of both V-oc, and J(sc) is compared with the model dye AK1. Complementary light absorbing dyes SQ1 and SQS4 possess absorption at 643 nm with extinction coefficients of 1.4 and 3.0 x 10(5) M-1 cm(-1), respectively. A cosensitized device performance of 9.36\% is obtained for the AK4:SQS4 (1:1) combination in the I-/I-3(-) electrolyte. The IPCE profile indicates a good response over 450-700 nm with 94\% at 621 nm. The importance of aggregated structures from both the dyes AK4 and SQS4 for photocurrent generation is realized.

}, keywords = {aggregation of dyes, co-sensitization, extension of conjugation, H-aggregate, squaraine dyes}, issn = {2574-0962}, doi = {10.1021/acsaem.0c02966}, author = {Singh, Ambarish Kumar and Veetil, Athulya Nellur and Nithyanandhan, Jayaraj} } @article {47085, title = {Dual-catalyst engineered porous organic framework for visible-light triggered, metal-free and aerobic sp(3) C-H activation in highly synergistic and recyclable fashion}, journal = {Journal of Catalysis}, volume = {394}, year = {2021}, month = {FEB}, pages = {40-49}, type = {Article}, abstract = {

Photoredox and organo-catalysis denote powerful construction tools for new classes of carbon-carbon bonds, where incisive amalgamation of both the approaches over a single, recyclable platform can bring about synergic and eco-friendly reactions under mild conditions. Aiming at enamine-based photoredox catalysis for atom-economic and metal-free sp(3 )C-H activation, an amide-based two-dimensional (2D) porous organic framework (POF) is devised. The pendent -NH2 groups are judiciously anchored with two catalytic stations viz. Rose Bengal and L-proline, through stepwise variation of solid phase peptide synthesis. The dual-catalyst engineered POF represents a fully organic material that synergistically performs visible-light triggered oxidative Mannich reaction to produce biorelevant heterocycle beta-amino ketone in excellent yield at room temperature, using oxygen as clean and selective oxidant. Importantly, activity of this bi-functionalized catalyst compares favorably well to individual homogeneous counterparts. The covalently modified framework demonstrates economic viability via gram-scale synthesis besides admirable reusability, and proves to be effective for nineteen varieties of substrates. The photocatalytic path is detailed from efficient energy transfer from host polymer to substrate in light of experimental and theoretical studies, which provides proof-of-concept to the photo-organo combined mechanism. The material benefits heterogenising two homogeneous catalysts, besides excluding additional steps of conventional Mannich reactions, and offers a step-forward to smart and green cross-dehydrogenative coupling reactions. (C) 2020 Elsevier Inc. All rights reserved.

}, keywords = {Atom-economy, C-H activation, Dual-catalyst engineering, Metal-free reaction, Photo-organo catalysis, Porous organic framework}, issn = {0021-9517}, doi = {10.1016/j.jcat.2020.12.013}, author = {Kumar, Gaurav and Dash, Soumya Ranjan and Neogi, Subhadip} } @article {47404, title = {Effect of Mn2+ substitution into the hst lattice of ZnO via sol-gel route for boosting the dye-sensitized solar cells performance}, journal = {Chemical Papers}, volume = {75}, year = {2021}, month = {AUG}, pages = {4001-4017}, type = {Article}, abstract = {

In this study, Mn2+ ion is doped in ZnO lattice framework at 1, 3 and 5 wt \% by a simple and low-cost sol-gel route to attain improved optoelectronic response. The structural investigation by XRD and Raman analysis explores the formation of hexagonal wurtzite framework with variations in lattice parameters comprising peak intensities favors the Mn doping. The extent of doping was supported by EDS analysis, while XPS confirms doping in + 2 chemical state. The optical investigation by UV-visible and PL provides prominent peaks that also specify peak shifting in order of doping level, while the significant hexagon-shaped nanoparticle (NP) formation was deduced in SEM and TEM micrographs. These proficient ZnO NPs have been deposited on fluorine-doped tin oxide (FTO) conducting glass plate by doctor-blade technique to get photoanodes. The electrical performance of these photoanodes especially photocurrent generation was investigated under standard AM 1.5 one sun illuminations. The highest photoconversion efficiency was attained for 3\% Mn-doped ZnO photoanode after xanthene-based organic dye sensitization with output efficiency (eta\%) of 0.25\% higher than 0.03\% of bare ZnO. The comparable ionic radii with exactly half-filled 3d orbital simply overlap with the ZnO valence bond responsible for enhanced overall structural and optical properties that beneficial for DSSCs performance.

}, keywords = {gel, Mixed dye, Mn-doped ZnO, Photoelectrochemical cell, Sol\&\#8211}, issn = {2585-7290}, doi = {10.1007/s11696-021-01615-w, Early Access Date = APR 2021}, author = {Kumbhar, Deepak and Delekar, Sagar and Kumbhar, Sarita and Dhodamani, Ananta and Harale, Namdev and Nalawade, Rekha and Nalawade, Avinash} } @article {47666, title = {Effect of Mn2+ substitution into the hst lattice of ZnO via sol-gel route for boosting the dye-sensitized solar cells performance (Apr, 10.1007/s11696-021-01615-w, 2021)}, journal = {Chemical Papers}, volume = {75}, year = {2021}, month = {AUG}, pages = {4019}, type = {Correction}, issn = {2585-7290}, doi = {10.1007/s11696-021-01658-z}, author = {Kumbhar, Deepak and Delekar, Sagar and Kumbhar, Sarita and Dhodamani, Ananta and Harale, Namdev and Nalawade, Rekha and Nalawade, Avinash} } @article {47071, title = {Effect of rice husk particle size on ZSM-5 physico-chemical properties for selective formation of 1,3,5-trimethyl-2-benzylbenzene (Pharmaceutical Intermediate)}, journal = {ChemistrySelect}, volume = {6}, year = {2021}, month = {FEB }, pages = {1255-1262}, type = {Article}, abstract = {

Rice husk, rich in silica and abundantly available as waste, is presently destroyed by burning, which creates environmental issues. Thus, it will be advantageous if this rice husk waste can be used for preparation of valuable products. One of the application is its use as silica source in the synthesis of zeolites like ZSM-5, which are silico-aluminates. Rice husk waste is available in wide range of particle sizes in agricultural farms. There is no study available in open literature on use of these wide particle ranges for its direct application. This paper is an attempt to use wide particle size rice husk, its effect on ZSM-5 synthesis and its physico-chemical properties. Further these prepared ZSM-5 catalyst was evaluated for benzylation of mesitylene reaction. The study found that, rice husk of 600 mu m particle size is optimum as far as ZSM-5 synthesis, its physicochemical properties and further its application in mesitylene benzylation reaction.

}, keywords = {Mesitylene, Particle size, rice husk, Silica Source, ZSM-5}, issn = {2365-6549}, doi = {10.1002/slct.202004802}, author = {Ghuge, Gorakh and Niphadkar, Prashant and Rathod, Simmy and Bokade, Vijay V.} } @article {47100, title = {Effective structure of a system with continuous polydispersity}, journal = {Journal of Chemical Physics}, volume = {154}, year = {2021}, month = {JAN }, pages = {034503}, type = {Article}, abstract = {

In a system of N particles, with continuous size polydispersity, there exists an N(N - 1) number of partial structure factors, making it analytically less tractable. A common practice is to treat the system as an effective one component system, which is known to exhibit an artificial softening of the structure. The aim of this study is to describe the system in terms of M pseudospecies such that we can avoid this artificial softening but, at the same time, have a value of M \<\< N. We use potential energy and pair excess entropy to estimate an optimum number of species, M-0. We then define the maximum width of polydispersity, Delta sigma (0), that can be treated as a monodisperse system. We show that M-0 depends on the degree and type of polydispersity and also on the nature of the interaction potential, whereas Delta sigma (0) weakly depends on the type of polydispersity but shows a stronger dependence on the type of interaction potential. Systems with a softer interaction potential have a higher tolerance with respect to polydispersity. Interestingly, M-0 is independent of system size, making this study more relevant for bigger systems. Our study reveals that even 1\% polydispersity cannot be treated as an effective monodisperse system. Thus, while studying the role of polydispersity by using the structure of an effective one component system, care must be taken in decoupling the role of polydispersity from that of the artificial softening of the structure.

}, issn = {0021-9606}, doi = {10.1063/5.0038812}, author = {Patel, Palak and Nandi, Manoj Kumar and Nandi, Ujjwal Kumar and Bhattacharyya, Sarika Maitra} } @article {47417, title = {Efficient metal-free organic room temperature phosphors}, journal = {Chemical Science}, volume = {12}, year = {2021}, month = {MAR}, pages = {4216-4236}, type = {Review}, abstract = {

An innovative transformation of organic luminescent materials in recent years has realised the exciting research area of ultralong room-temperature phosphorescence. Here the credit for the advancements goes to the rational design of new organic phosphors. The continuous effort in the area has yielded wide varieties of metal-free organic systems capable of extending the lifetime to several seconds under ambient conditions with high quantum yield and attractive afterglow properties. The various strategies adopted in the past decade to manipulate the fate of triplet excitons suggest a bright future for this class of materials. To analyze the underlying processes in detail, we have chosen high performing organic triplet emitters that utilized the best possible ways to achieve a lifetime above one second along with impressive quantum yield and afterglow properties. Such a case study describing different classes of metal-free organic phosphors and strategies adopted for the efficient management of triplet excitons will stimulate the development of better candidates for futuristic applications. This Perspective discusses the phosphorescence features of single- and multi-component crystalline assemblies, host-guest assemblies, polymers, and polymer-based systems under various classes of molecules. The various applications of the organic phosphors, along with future perspectives, are also highlighted.

}, issn = {2041-6520}, doi = {10.1039/d1sc00446h}, author = {Nidhankar, Aakash D. and Goudappagouda and Wakchaure, Vivek C. and Babu, Sukumaran Santhosh} } @article {47589, title = {Electronically integrated mesoporous Ag-TiO2 nanocomposite thin films for efficient solar hydrogen production in direct sunlight}, journal = {Energy Technology}, volume = {10}, year = {2021}, month = {AUG}, pages = {2100356}, type = {Article}, abstract = {

The synthesis of mesoporous TiO2 by a solution-based assembly process and Ag/TiO2 nanocomposites is provided. The efficacy of Ag/TiO2 nanocomposite as photocatalyst in thin-film form is demonstrated for solar hydrogen generation in sunlight. Integration of Ag with TiO2 dramatically enhanced the H-2 production: with 1 wt\% Ag on TiO2 (TiAg-1), the H-2 yield was observed to be 4.59 mmol h(-1) g(-1), which is 2.3 (30) times larger than 0.5 wt\% Ag on TiO2. TiAg-1 shows 4.3 times higher activity in film form compared with its powder counterpart. High photocatalytic efficiency is attributed to the surface plasmon resonance effect of Ag, electronic integration of Ag with TiO2, and subsequent valence band broadening, large distribution of Ag nanoparticles and abundant Ag-TiO2 Schottky junctions, and the later minimizes electron-hole recombination. Interparticle mesoporous network increases necking and the high surface area offers easy accessibility of the reactants to a large number of active sites.

}, keywords = {heterogeneous catalysis, heterojunctions, plasmon effect, Silver, solar energy conversion, Solar hydrogen}, issn = {2194-4288}, doi = {10.1002/ente.202100356}, author = {Mani, Sunesh S. and Rajendran, Sivaraj and Nalajala, Naresh and Mathew, Thomas and Gopinath, Chinnakonda S.} } @article {47408, title = {Enantioselective reduction of ketones and synthesis of 2-methyl-2,3-dihydro-1-benzofuran catalyzed by chiral spiroborate ester}, journal = {Russian Journal of Organic Chemistry}, volume = {57}, year = {2021}, month = {APR}, pages = {611-618}, type = {Article}, abstract = {

Asymmetric reduction of homobenzylic ketones was achieved through the use of chiral spiroborate ester catalyst. The catalyst is applicable for both analytical and industrial purposes since it is not sensitive to air and moisture. A rapid synthetic route has been developed for the preparation of (S)-2-methyl-2,3-dihydro-1-benzofuran via enantioselective reduction of homobenzylic ketone in the presence of a chiral spiroborate catalyst as the key step.

}, keywords = {2-methyl-2, 3-dihydro-1-benzofuran, asymmetric reduction, spiroborate ester}, issn = {1070-4280}, doi = {10.1134/S1070428021040163}, author = {Patil, H. S. and Nikalje, M. D. and Chopade, A. U. and Chopade, M. U.} } @article {47660, title = {Enantioselective separation using chiral amino acid functionalized polyfluorene coated on mesoporous anodic aluminum oxide membranes (vol 92, pg 6850, 2020)}, journal = {Analytical Chemistry}, volume = {93}, year = {2021}, month = {JUL }, pages = {10388}, type = {Correction}, issn = {0003-2700}, doi = {10.1021/acs.analchem.1c02694}, author = {Nikam, Shrikant B. and Asha, S. K.} } @article {46669, title = {Enhanced photoelectrochemical cell performance of Co doped ZnO nanoparticles sensitized by affordable mixed dyes as sensitizer}, journal = {Inorganic and Nano-Metal Chemistry}, volume = {51}, year = {2021}, month = {SEP}, pages = {1258-1271}, type = {Article}, abstract = {

In the present investigation, a simple sol-gel approach has been employed for the synthesis of hexagonal wurtzite ZnO nanoparticles (NPs). X-ray diffraction (XRD) rietveld study and Raman analysis reveal the mislaid of the mixed phases of ZnO NPs after doping. The scanning electron micrographs and transmission electron microscopy confirm the formation of hexagonal disk-shaped NPs. FTIR, PL, EDX, XPS validate optical and stoichiometric concentration of Co in ZnO lattice. UV-visible DRS study shows absorption edge with humps to the red region of the spectrum with increasing the absorption strength and shortening of band gap as the content of Co (II) increases. Finally, the prepared samples were coated on the surface of cleaned FTO substrate through a simple doctor blade technique and sensitized with prepared dye. The ZnO photoanode shows 0.036\% of efficiency (eta\%) while the photoanodes of Co doped samples expose the enhanced efficiencies of 0.29\%, 0.389\%, 0.089\%.

}, keywords = {Co doped ZnO, mixed dyes as sensitizer, Photoelectrochemical cell, sol-gel}, issn = {2470-1556}, doi = {10.1080/24701556.2020.1835963}, author = {Kumbhar, Deepak and Kumbhar, Sarita and Dhodamani, Anant and Delekar, Sagar and Harale, Namdev and Nalawade, Rekha and Nalawade, Avinash} } @article {47115, title = {Enhanced solubility, permeability, and tabletability of nicorandil by salt and cocrystal formation}, journal = {Crystengcomm}, volume = {23}, year = {2021}, month = {JAN }, pages = {227-237}, type = {Article}, abstract = {

Cocrystallization is a rational selection crystal engineering approach for the development of novel solid forms with enhanced physicochemical and mechanical properties. Nicorandil (NCR) is a niacinamide vitamin derivative used to treat angina pectoris. A binary solid form screen of NCR with homologous dicarboxylic acids afforded NCR-oxalic acid (NCR-OA, 1:1), NCR-fumaric acid (NCR-FA, 1:1), NCR-succinic acid (NCR-SA, 1:1), and NCR-suberic acid (NCR-SBA, 1:0.5). The binary solids were characterized by powder X-ray diffraction, IR and NMR spectroscopy, and DSC. NCR-FA and NCR-SBA were crystallized by slow evaporation from chloroform and toluene solvents, respectively. Single crystal X-ray diffraction confirmed that NCR-FA is a molecular salt, while NCR-SBA is a neutral cocrystal. NCR and the FA anion are connected via the robust carbovlate-pyridinium synthon, whereas in the NCR-SBA cocrystal, the components associate via the carboxylic acid- -pyridine synthon. The phase stability, solubility, dissolution rate, diffusion rate and tabletability studies have demonstrated that the binary solids exhibit improved physical and mechanical properties compared to the NCR drug. Specifically, the NCR-FA salt and NCR-SBA cocrystal have higher solubility, dissolution rate, and hardness at lower pressures, making the formulation suitable for tablet compression.

}, issn = {1466-8033}, doi = {10.1039/d0ce01316a}, author = {Mannava, M. K. Chaitanya and Gunnam, Anilkumar and Lodagekar, Anurag and Shastri, Nalini R. and Nangia, Ashwini K. and Solomon, K. Anand} } @article {47684, title = {Entacapone polymorphs: crystal structures, dissolution, permeability, and stability}, journal = {Crystal Growth \& Design}, volume = {21}, year = {2021}, month = {OCT }, pages = {5573-5585}, type = {Article}, abstract = {Entacapone (ETP) is a catechol-O-methyltransferase (COMT) drug used to treat Parkinson{\textquoteright}s disease. ETP is available in the marketplace under the brand name Comtan since 2010, and ETP form-I was first reported in a patent published in 2001. However, analysis of its Xray crystal structures and stability relationship of ETP polymorphs and their dissolution and permeability profile have not yet been reported. We crystallized two new conformational polymorphs of ETP from a water and acetone mixture and studied the structural origin of polymorphism and their phase transformations, stability, equilibrium solubility, dissolution, and permeability properties. The ETP molecule adopts different conformations in the polymorphic structures with slight changes in carbonyl and nitrile group orientations. Thermal analysis suggests that form-III and form-IV are enantiotropically related to form-I, which is the thermodynamically stable form at ambient conditions. In contrast, form-II is monotropically related to form-I. Equilibrium solubility, dissolution, and permeability studies show that form-II persists in the slurry medium and dissolves faster with a high flux rate compared to the stable form-I in phosphate buffer solution at 37 +/- 0.5 degrees C.}, issn = {1528-7483}, doi = {10.1021/acs.cgd.1c00381}, author = {Bommaka, Manish Kumar and Mannava, M. K. Chaitanya and Rai, Sunil K. and Suresh, Kuthuru and Nangia, Ashwini K.} } @article {47697, title = {Genome wide analysis of 14-3-3 proteins in Cicer arietinum L. and identification of isoforms responsive to Fusarium oxysporum}, journal = {Current Science}, volume = {121}, year = {2021}, month = {OCT }, pages = {1039-1045}, type = {Article}, abstract = {In the present study, we have identified and characterized two 14-3-3 isoforms, namely isoform A and C from chickpea (Cicer arietinum L.), that might play a crucial role during disease resistance. Further, in silico analysis of these 14-3-3 proteins was accomplished, including motif identification and structure prediction from deduced amino acid sequences. Expression profiling of the two representative 14-3-3 isoforms in the roots of wilt resistant and susceptible chickpea varieties upon Fusarium oxysporum f. sp ciceri race 1 (FOC1) challenge, revealed time dependent isoform specific differential expression in induced chickpea roots upon FOC1 colonization.}, keywords = {Bioinformatics, chickpea 14-3-3s, pathogen responsive, transcriptional analysis}, issn = {0011-3891}, doi = {10.18520/cs/v121/i8/1039-1045}, author = {Gurjar, Gayatri and Nimbalkar, Suhas and Giri, Ashok and Gupta, Vidya} } @article {46598, title = {Glycosyltransferases: the multifaceted enzymatic regulator in insects}, journal = {Insect Molecular Biology}, volume = {30}, year = {2021}, month = {APR}, type = {Article}, abstract = {

Glycosyltransferases (GTs) catalyse the reaction of glyco-conjugation of various biomolecules by transferring the saccharide moieties from an activated nucleotide sugar to nucleophilic glycosyl acceptor. In insects, GTs show diverse temporal and site-specific expression patterns and thus play significant roles in forming the complex biomolecular structures that are necessary for insect survival, growth and development. Several insects exhibit GT-mediated detoxification as a key defence strategy against plant allelochemicals and xenobiotic compounds, as well as a mechanism for pesticide cross-resistance. Also, these enzymes act as crucial effectors and modulators in various developmental processes of insects such as eye development, UV shielding, cuticle formation, epithelial development and other specialized functions. Furthermore, many of the known insect GTs have been shown to play a fundamental role in other physiological processes like body pigmentation, cuticular tanning, chemosensation and stress response. This review provides a detailed overview of the multifaceted functionality of insect GTs and summarizes numerous case studies associated with it.

}, keywords = {Allelochemicals, Detoxification, Development, glycosyltransferases (GTs), insects}, issn = {0962-1075}, doi = {10.1111/imb.12686}, author = {Nagare, M. and Ayachit, M. and Agnihotri, A. and Schwab, W. and Joshi, R.} } @article {47804, title = {Green antibacterial molecules: sophorolipids with varying fatty acid chain}, journal = {Trends in Biomaterials and Artificial Organs}, volume = {35}, year = {2021}, month = {NOV}, pages = {431+}, type = {Article}, abstract = {Antibiotic resistance is a rising problem of over the last decade making it difficult to treat infections caused by various pathogenic bacteria. To tackle this problem, newer antimicrobial strategies are being explored. Sophorolipids (SLs) are a class of biomolecules produced by a non-pathogenic yeast Starmarella bombicola (S. bombicold) with surfactant as well as potent broad spectrum antibacterial activity. In this work, we have successfully synthesized sophorolipids using different fatty acids with increasing chain length of hydrophobic tail; Lauric acid (C12)-LASL, Myristic acid (C14)-MASL, Palmitic acid (C16)-PASL and Stearic acid (C18)-SASL. We have used various techniques like FTIR, HRMS to characterize the synthesized SL. Further, we have measured properties like the critical micellar concentration for these biosurfactants and the SL{\textquoteright}s showed CMC less than or equal to 100 mg/L indicating excellent surface-active property. We have studied the antibacterial activity against gram-negative and gram-positive bacteria. Interestingly, the antibacterial activity was found to be more potent as the chain length of the fatty acid in the SL decreased. This trend was found to be reverse for toxicity towards mammalian cells. The shorter chain fatty acid SL{\textquoteright}s were found to be less cytotoxic. These results indicate that the sophorolipid candidates with shorter chain lengths would be beneficial for various biomedical applications such as tissue engineering, regenerative medicine and wound healing. Keywords: sophorolipid, biosurfactant, short chain fatty acid, antibacterial}, keywords = {Antibacterial agents, Cells (Biology), Infection, Microbial drug resistance, Saturated fatty acids, Surface active agents}, isbn = {09711198}, url = {https://link.gale.com/apps/doc/A684660702/AONE?u=anon~d0cd1b4e\&sid=googleScholar\&xid=1a6d61d9}, author = {Hirlekar, Swarali and Abhyankar, Isha and Kane, Kartiki and Trimukhe, Kalpana and Prabhune, Asmita and Nisal, Anuya} } @article {47689, title = {Hydrogenolysis of benzofuran using aqueous ethanol solution over graphite-supported platinum catalyst}, journal = {Journal of the Indian Chemical Society}, volume = {98}, year = {2021}, month = {FEB}, pages = {100021}, type = {Article}, abstract = {Graphite-supported platinum catalysts (Pt/G) were highly active for the hydrogenolysis of benzofuran to o-ethylphenol in aqueous ethanol solution at 523 K without using any external hydrogen gas. The hydrogenolysis activities and selectivity to o-ethylphenol in ethanol solution over Pt/G were higher than those with a conventional method using externally supplied hydrogen gas. Both water and ethanol were indispensable for the hydrogenolysis in aqueous ethanol solution at 523 K.}, keywords = {Biomass conversion, Graphite support, Hydrogenolysis, platinum catalysts}, issn = {0019-4522}, doi = {10.1016/j.jics.2021.100021}, author = {Hiraishi, Yushi and Minakawa, Naohiro and Taniguchi, Kenkichi and Nagasawa, Yoshiyuki and Nanao, Hidetaka and Rode, V, Chandrashekhar and Sato, Osamu and Yamaguchi, Aritomo and Shirai, Masayuki} } @article {47455, title = {Hydrophilic 3D interconnected network of bacterial nanocellulose/black titania photothermal foams as an efficient interfacial solar evaporator}, journal = {ACS Applied Bio Materials}, volume = {4}, year = {2021}, month = {APR}, pages = {4373{\textendash}4383}, type = {Article}, abstract = {

The design and development of scalable, efficient photothermal evaporator systems that reduce microplastic pollution are highly desirable. Herein, a sustainable bacterial nanocellulose (BNC)-based self-floating bilayer photothermal foam (PTFb) is designed that eases the effective confinement of solar light for efficient freshwater production via interfacial heating. The sandwich nanoarchitectured porous bilayer solar evaporator consists of a top solar-harvesting blackbody layer composed of broad-spectrum active black titania (BT) nanoparticles embedded in the BNC matrix and a thick bottom layer of pristine BNC for agile thermal management, the efficient wicking of bulk water, and staying afloat. A decisive advantage of the BNC network is that it enables the fabrication of a lightweight photothermal foam with reduced thermal conductivity and high wet strength. Additionally, the hydrophilic three-dimensional (3D) interconnected porous network of BNC contributes to the fast evaporation of water under ambient solar conditions with reduced vaporization enthalpy by virtue of intermediated water generated via a BNC{\textendash}water interaction. The fabricated PTFb\ is found to yield a water evaporation efficiency of 84.3\% (under 1054 W m{\textendash}2) with 4 wt \% BT loading. Furthermore, scalable PTFb\ realized a water production rate of 1.26 L m{\textendash}2\ h{\textendash}1\ under real-time conditions. The developed eco-friendly BNC-supported BT foams could be used in applications such as solar desalination, contaminated water purification, extraction of water from moisture, etc., and thus could address one of the major present-day global concerns of drinking water scarcity.

}, doi = {10.1021/acsabm.1c00143}, author = {Nabeela, Kallayi and Thorat, Meghana and Sumina, N. B. and Ramachandran, Animesh M. and Thomas, Reny Thankam and Preethikumar, Gopika and Mohamed, A. Peer and Asok, Adersh and Dastager, Syed Gulam and Pillai, Saju} } @article {47125, title = {In silico studies, synthesis and antitubercular activity of some novel quinoline - azitidinone derivatives}, journal = {Current Computer-Aided Drug Design}, volume = {17}, year = {2021}, month = {JAN}, pages = {134-143}, type = {Article}, abstract = {

Background: Diarylquinolines like Bedaquiline have shown promising antitubercular activity by their action of Mycobacterial ATPase. Objective: The structural features necessary for a good antitubercular activity for a series of quinoline derivatives were explored through computational chemistry tools like QSAR and combinatorial library generation. In the current study, 3-Chloro-4-(2-mercaptoquinoline-3-yl)-1-substitutedphenylazitidin-2-one derivatives have been designed and synthesized based on molecular modeling studies as anti-tubercular agents. Methods: 2D and 3D QSAR analyses were used to designed compounds having a quinoline scaffold. The synthesized compounds were evaluated against active and dormant strains of Mycobacterium tuberculosis (MTB) H37 Ra and Mycobacterium bovis BCG. The compounds were also tested for cytotoxicity against MCF-7, A549 and Panc-1 cell lines using MTT assay. The binding affinity of designed compounds was gauged by molecular docking studies. Results: Statistically significant QSAR models generated by the SA-MLR method for 2D QSAR exhibited r(2) = 0.852, q(2) = 0.811, whereas 3D QSAR with SA-kNN showed q(2) = 0.77. The synthesized compounds exhibited MIC in the range of 1.38-14.59(mu g/ml). These compounds showed some crucial interaction with MTB ATPase. Conclusion: The present study has shown some promising results which can be further explored for lead generation.

}, keywords = {combilib, Molecular docking, mycobacterial ATPase, QSAR, Quinoline}, issn = {1573-4099}, doi = {10.2174/1573409916666200129095952}, author = {Chitre, Trupti S. and Asgaonkar, Kalyani D. and Vikhe, Amrut B. and Patil, Shital M. and Garud, Dinesh R. and Khedkar, Vijay M. and Sarkar, Dhiman and Nawale, Laxman U. and Yeware, Amar} } @article {47432, title = {In situ polymerization process: an essential design tool for lithium polymer batteries dagger}, journal = {Energy \& Environmental Science}, volume = {14}, year = {2021}, month = {MAY }, pages = {2708-2788}, type = {Review}, abstract = {

Polymer electrolytes (PEs), a type of solid-state electrolytes (SSEs), have been in contention for nearly half a century to replace organic liquid electrolytes (LEs) that are used in state-of-the-art lithium-ion batteries (LIBs). They are envisaged to accelerate the industrial-scale production of safe, energy-dense, flexible, and thin lithium polymer batteries (LPBs). LPBs are expected to be widely employed for electric propulsion and other futuristic applications, such as flexible electronics and the Internet of Things (IoT). Even though several polymer architectures and chemistries have been attempted so far, PEs that can outperform LEs remain a real challenge. Apart from inadequate Li+-ion transport properties, challenges concerning the integration of PEs and the engineering of compatible, robust, and durable interfaces and interphases at both the electrodes of LPBs must be appropriately addressed. Recently, the in situ polymerization process has been widely employed as a robust fabrication tool for surpassing the intricacies related to the integration of PEs in LPBs. Hence, in this review, we focus on the in situ polymerization processes that employ various polymerization methods (e.g., free-radical polymerization, ionic polymerization, electropolymerization, condensation polymerization, etc.), functional monomers and oligomers (e.g., acrylate, methacrylate, allyl and vinyl ethers, epoxides, etc.), and PE integration strategies for the fabrication of lithium (ion and metal) polymer batteries (LIPBs and LMPBs). Additionally, this review also evaluates the approaches that have been developed until now to implement the in situ processing of LPBs from large-sized pouch cells to flexible-/printable-batteries and even microbatteries.

}, issn = {1754-5692}, doi = {10.1039/d0ee03527k, Early Access Date = FEB 2021}, author = {Vijayakumar, Vidyanand and Anothumakkool, Bihag and Kurungot, Sreekumar and Winter, Martin and Nair, Jijeesh Ravi} } @article {46766, title = {In situ preparation of ionomer as a tool for triple-phase boundary enhancement in 3D graphene supported Pt catalyst}, journal = {Advanced Sustainable Systems}, volume = {5}, year = {2021}, month = {JAN}, pages = {2000125}, type = {Article}, abstract = {

For improving the performance of platinum electrocatalysts in polymer electrolyte membrane fuel cells (PEMFCs), it is important to enhance the Pt utilization level in the catalyst systems. A high performing electrocatalyst (Pt/3DNG) is developed for PEMFC applications by using nitrogen-doped 3D graphene (3DNG) as the support material and an in situ grafted active {\textquoteleft}{\textquoteleft}triple-phase boundary{\textquoteright}{\textquoteright} to more precisely control the formation of the proton conducting ionomer interface at the active sites. Considering the 3D morphology of the system, during the electrode fabrication for realistic single-cell evaluation, the concept of in situ generation of the proton conducting-ionomer based {\textquoteleft}{\textquoteleft}active triple-phase boundary{\textquoteright}{\textquoteright} is introduced, which could potentially replace the conventional method of using Nafion ionomer for the electrode preparation. The monomers owing to their small-size can access the pores and inner regions of the 3DNG support, which on UV-curing, undergo polymerization and transform into an ionomer with an extended interfacial network into the nanoregimes of 3DNG. Single cell evaluation of the membrane electrode assembly in a high-temperature PEMFC by using phosphoric acid doped polybenzimidazole membrane demonstrates the utility of the present strategy.

}, keywords = {electrocatalysts, fuel cells, graphene, oxygen reduction reaction}, issn = {2366-7486}, doi = {10.1002/adsu.202000125, Early Access Date = JUL 2020}, author = {Gangadharan, Pranav K. and Vijayakumar, Vidyanand and Nediyirakkal, Shijil A. and Fernandez, Roshni Tresa and Siddharthan, V. Adhrika and Kurungot, Sreekumar} } @article {47807, title = {In vitro antitubercular screening and in silico study of germacradienolide from blainvillea latifolia}, journal = {Asian Journal of Chemistry}, volume = {33}, year = {2021}, month = {JAN}, pages = {3129-3133}, type = {Article}, abstract = {Bioassay-guided isolation from acetone extract of Blainvillea latifolia yielded one compound. The acetone extract, fractions and the compound 1 were investigated for antitubercular activity against Mycobacterium tuberculosis H37Ra. Compound 1 showed the activity with IC50 and MIC values at 8.9 and >100 μg/mL. However, the acetone extract of Blainvillea latifolia was inactive against two Gram negative (E. coli, P. flurescence) and two Gram-positive (S. aureus, B. subtilis) bacterial strains. Hence, it was concluded that the extract and the compound 1 are specifically active against MTB and not against bacterial strains. Molecular docking study was performed against crucial mycobacterial target MtInhA to gain an insight into the binding mode and the thermodynamic interactions governing the binding affinity of this molecule. }, doi = {10.14233/ajchem.2021.23537}, author = {Honmore, Varsha and Kalyankar, Vidya and Natu, Arun and Khedkar, Vijay and Sarkar, Dhiman and Rojatkar, Supada} } @article {47445, title = {Influence of sodium caseinate, maltodextrin, pectin and their Maillard conjugate on the stability, in vitro release, anti-oxidant property and cell viability of eugenol-olive oil nanoemulsions}, journal = {International Journal of Biological Macromolecules}, volume = {183}, year = {2021}, month = {JUL}, pages = {158-170}, type = {Article}, abstract = {

The influence of protein (sodium caseinate-SC), polysaccharide (maltodextrin-MD; pectin-PC) and their Maillard conjugates (sodium caseinate maltodextrin conjugate-SCMDC; sodium caseinate pectin conjugate-SCPCC) were studied on the physico-chemical and biological properties of eugenol nanoemulsions/powder. The chemical composition was optimized using Taguchi design. The particles size of eugenol nanoemulsions with SC, MD, PC, SCMDC and SCPCC were 104.6, 323.5, 1872, 181.7, and 454.4 nm, respectively while their zeta potentials were -31.2, -28.5, -21.4, -40.1 and -25.1 mV, respectively. Turbidity studies revealed higher stability of nanoemulsion prepared with Maillard conjugate (SCMDC) compared to protein or polysaccharides alone. The dispersion of SCMDC eugenol nanoparticles in buffer was prepared to study its stability at different pH (3.0, 5.0, and 7.0) and temperature (4{\textdegree}, 37{\textdegree}, 60 {\textdegree}C) range. In-vitro enzymatic release study showed 31 and 74\% release of eugenol after 6 h at pH 2.4 and 7.4, respectively. In vitro antioxidant capacity of SCMDC encapsulated eugenol was higher than native eugenol, as demonstrated by free radical scavenging assays. In comparison to native eugenol, E:SCMDC eugenol showed reduced toxicity. These findings suggested that nanoencapsulated eugenol (E:SCMDC) have a huge potential in nutraceutical and therapeutic applications.

}, doi = {10.1016/j.ijbiomac.2021.04.122}, author = {Nagaraju, Pramod G. and Sindhu, P. and Dubey, Tushar and Chinnathambi, Subashchandrabose and Priyadarshini, Poornima and Rao, Pooja J.} } @article {47390, title = {Insights from a pan India Sero-epidemiological survey (Phenome-India Cohort) for SARS-CoV2}, journal = {eLife}, volume = {10}, year = {2021}, month = {APR }, pages = {e66537}, type = {Article}, abstract = {

To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14\%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95\% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10\% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95\% confidence interval, p value: 2.23, 1.92-2.59, \<0.0001), use of public transport (1.79, 1.43-2.24, \<0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, \<0.0001), and B blood group (1.36, 1.15-1.61, 0.001).

}, issn = {2050-084X}, doi = {10.7554/eLife.66537}, author = {Naushin, Salwa and Sardana, Viren and Ujjainiya, Rajat and Bhatheja, Nitin and Kutum, Rintu and Bhaskar, Akash Kumar and Pradhan, Shalini and Prakash, Satyartha and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Chandak, Giriraj Ratan and Lahiri, Amit and Kar, Susanta and Mulay, Shrikant Ramesh and Mugale, Madhav Nilakanth and Srivastava, Mrigank and Khan, Shaziya and Srivastava, Anjali and Tomar, Bhawana and Veerapandian, Murugan and Venkatachalam, Ganesh and Vijayakumar, Selvamani Raja and Agarwal, Ajay and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Sundaram, Gopinath M. and Veeranna, Ravindra P. and Pal, Anirban and Agarwal, Vinay Kumar and Maurya, Anil Ku and Singh, Ranvijay Kumar and Raman, Ashok Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Venkatesan, Subramanian and Sardana, Harish Kumar and Kothari, Anamika and Jain, Rishabh and Thakur, Anupama and Parihar, Devendra Singh and Saifi, Anas and Kaur, Jasleen and Kumar, Virendra and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Singh, Praveen and Chakraborty, Rahul and Chaturvedi, Gaura and Karunakar, Pinreddy and Yadav, Rohit and Singhmar, Sunanda and Singh, Dayanidhi and Sarkar, Sharmistha and Bhattacharya, Purbasha and Acharya, Sundaram and Singh, Vandana and Verma, Shweta and Soni, Drishti and Seth, Surabhi and Vashisht, Sakshi and Thakran, Sarita and Fatima, Firdaus and Singh, Akash Pratap and Sharma, Akanksha and Sharma, Babita and Subramanian, Manikandan and Padwad, Yogendra S. and Hallan, Vipin and Patial, Vikram and Singh, Damanpreet and Tripude, Narendra Vijay and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sarkar, Jit and Ramakrishna, Sistla and Kumar, Balthu Narender and Kumar, Kiran A. and Gandhi, Sumit G. and Jamwal, Piyush Singh and Chouhan, Rekha and Jamwal, Vijay Lakshmi and Kapoor, Nitika and Ghosh, Debashish and Thakkar, Ghanshyam and Subudhi, Umakanta and Sen, Pradip and Chaudhury, Saumya Ray and Kumar, Rashmi and Gupta, Pawan and Tuli, Amit and Sharma, Deepak and Ringe, Rajesh P. and Amarnarayan, D. and Kulkarni, Mahesh and Shanmugam, Dhansekaran and Dharne, Mahesh S. and Dastager, Sayed G. and Joshi, Rakesh and Patil, Amita P. and Mahajan, Sachin N. and Khan, Abujunaid Habib and Wagh, Vasudev and Yadav, Rakesh Kumar and Khilari, Ajinkya and Bhadange, Mayuri and Chaurasiya, Arvindkumar H. and Kulsange, Shabda E. and Khairnar, Krishna and Paranjape, Shilpa and Kalita, Jatin and Sastry, Narahari G. and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, Ravi Kumar and Babu, Elapavalooru Vssk and Sukumaran, Rajeev and Nair, Aiswarya R. and Valappil, Prajeesh Kooloth and Puthiyamadam, Anoop and Velayudhanpillai, Adarsh and Chodankar, Kalpana and Damare, Samir and Madhavi, Yennapu and Aggarwal, Ved Varun and Dahiya, Sumit and Agrawal, Anurag and Dash, Debasis and Sengupta, Shantanu} } @article {47751, title = {Ionic conductivity of Na3Al2P3O12 glass electrolytes role of charge compensators}, journal = {Inorganic Chemistry}, volume = {60}, year = {2021}, month = {SEP }, pages = {12893-12905}, type = {Article}, abstract = {In glasses, a sodium ion (Na+) is a significant mobile cation that takes up a dual role, that is, as a charge compensator and also as a network modifier. As a network modifier, Na+ cations modify the structural distributions and create nonbridging oxygens. As a charge compensator, Na+ cations provide imbalanced charge for oxygen that is linked between two network-forming tetrahedra. However, the factors controlling the mobility of Na+ ions in glasses, which in turn affects the ionic conductivity, remain unclear. In the current work, using high-fidelity experiments and atomistic simulations, we demonstrate that the ionic conductivity of the Na3Al2P3O12 (Si0) glass material is dependent not only on the concentration of Na+ charge carriers but also on the number of charge-compensated oxygens within its first coordination sphere. To investigate, we chose a series of glasses formulated by the substitution of Si for P in Si0 glass based on the hypothesis that Si substitution in the presence of Na+ cations increases the number of SiOAl bonds, which enhances the role of Na as a charge compensator. The structural and conductivity properties of bulk glass materials are evaluated by molecular dynamics (MD) simulations, magic angle spinning-nuclear magnetic resonance, Raman spectroscopy, and impedance spectroscopy. We observe that the increasing number of charge-imbalanced bridging oxygens (BOs) with the substitution of Si for P in Si0 glass enhances the ionic conductivity by an order of magnitudefrom 3.7 x 10(-8) S.cm(-1) to 3.3 x 10(7) S.cm(-1) at 100 degrees C. By rigorously quantifying the channel regions in the glass structure, using MD simulations, we demonstrate that the enhanced ionic conductivity can be attributed to the increased connectivity of Na-rich channels because of the increased charge-compensated BOs around the Na atoms. Overall, this study provides new insights for designing next-generation glass-based electrolytes with superior ionic conductivity for Na-ion batteries}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.1c01280}, author = {Keshri, Shweta R. and Ganisetti, Sudheer and Kumar, Rajesh and Gaddam, Anuraag and Illath, Kavya and Ajithkumar, Thalasseril G. and Balaji, Sathravada and Annapurna, K. and Nasani, Narendar and Krishnan, N. M. Anoop and Allu, Amarnath R.} } @article {47343, title = {Limonoid biosynthesis 3: functional characterization of crucial genes involved in neem limonoid biosynthesis (vol 184, 112669, 2021)}, journal = {Phytochemistry}, volume = {187}, year = {2021}, month = {JUL}, pages = {112751}, type = {Correction}, issn = {0031-9422}, doi = {10.1016/j.phytochem.2021.112751}, author = {Pandreka, Avinash and Chaya, Patil S. and Kumar, Ashish and Aarthy, Thiagarayaselvam and Mulani, Fayaj A. and Bhagyashree, Date D. and Shilpashree, H. B. and Jennifer, Cheruvathur and Ponnusamy, Sudha and Nagegowda, Dinesh and Thulasiram, Hirekodathakallu V.} } @article {47033, title = {Limonoid biosynthesis 3: functional characterization of crucial genes involved in neem limonoid biosynthesis}, journal = {Phytochemistry}, volume = {184}, year = {2021}, month = {APR}, pages = {112669}, type = {Article}, abstract = {

Neem (Azadirachta indica L.) is well known for its medicinal, agricultural, and pesticidal applications since ages. The secondary metabolites, limonoids, confer these biological properties, wherein over 150 different limonoids have been reported from neem. To understand limonoid biosynthesis, we analyzed tissue-specific (kernel, pericarp, leaves, and flower) transcriptome that resulted in the identification of one farnesyl diphosphate synthase (AiFDS), one squalene synthase (AiSQS), three squalene epoxidases (AiSQE1, AiSQE2, and AiSQE3), two triterpene synthases (AiTTS1 and AiTTS2), cycloartenol synthase (AiCAS), two cytochrome P450 reductases, and ten cytochrome P450 systems. Comparative tissue-expression analysis indicated that AiFDS, AiSQS, AiSQE3, and AiTTS1 are expressed higher in the kernel than in the other tissues. Heterologously expressed recombinant AiTTS1 produced tirucalla-7,24-dien-3 beta-ol as the sole product. Expression profile data, phylogeny with triterpene synthases from Meliaceae and Rutaceae families, real-time PCR of different tissues, and transient transformation revealed the involvement of tirucalla-7,24-dien-3 beta-ol synthase (AiTTS1) in limonoid biosynthesis. Further, mutagenesis studies of AiTTS1 indicated that Y125 and F260 are probably involved in stabilization of dammarenyl cation. A 2.6-fold increase in production of tirucalla-7,24-dien-3 beta-ol was observed when AiSQE1 was coexpressed with mutant AiTTS1 in a yeast system. Furthermore, we functionally characterized the highly expressed cytochrome P450 reductases and cycloartenol synthase. This study helps in further analysis and identification of genes involved in limonoid biosynthesis in Meliaceae/Rutaceae and their production in a metabolically tractable heterologous system.

}, keywords = {24-dien-3 beta-ol, Azadirachta indica A. Juss., Cytochrome P450 system, Limonoids, Meliaceae, Tirucalla-7, Transcriptome}, issn = {0031-9422}, doi = {10.1016/j.phytochem.2021.112669}, author = {Pandreka, Avinash and Chaya, Patil S. and Kumar, Ashish and Aarthy, Thiagarayaselvam and Mulani, Fayaj A. and Bhagyashree, Date D. and Shilpashree, H. B. and Jennifer, Cheruvathur and Ponnusamy, Sudha and Nagegowda, Dinesh and Thulasiram, V. Hirekodathakallu} } @article {47034, title = {Loss of a water-mediated network results in reduced agonist affinity in a beta(2)-adrenergic receptor clinical variant}, journal = {Biochimica ET Biophysica Acta-Proteins and Proteomics}, volume = {1869}, year = {2021}, month = {APR}, pages = {140605}, type = {Article}, abstract = {

The beta(2)-adrenergic receptor (beta(2)AR) is a member of the G protein-coupled receptor (GPCR) family that is an important drug target for asthma and COPD. Clinical studies coupled with biochemical data have identified a critical receptor variant, Thr164Ile, to have a reduced response to agonist-based therapy, although the molecular mechanism underlying this seemingly {\textquoteleft}{\textquoteleft}non-deleterious{\textquoteright}{\textquoteright} substitution is not clear. Here, we couple molecular dynamics simulations with network analysis and free-energy calculations to identify the molecular determinants underlying the differential drug response. We are able to identify hydration sites in the transmembrane domain that are essential to maintain the integrity of the binding site but are absent in the variant. The loss of these hydration sites in the variant correlates with perturbations in the intra-protein interaction network and rearrangements in the orthosteric ligand binding site. In conjunction, we observe an altered binding and reduced free energy of a series of agonists, in line with experimental trends. Our work identifies a functional allosteric pathway connected by specific hydration sites in beta(2)AR that has not been reported before and provides insight into water-mediated networks in GPCRs in general. Overall, the work is one of the first step towards developing variant-specific potent and selective agonists.

}, keywords = {beta(2)-Adrenergic receptor, G protein coupled receptor, GPCR, molecular dynamics, Pharmacogenetics, SNP}, issn = {1570-9639}, doi = {10.1016/j.bbapap.2021.140605}, author = {Nikte, V. Siddhanta and Sonar, Krushna and Tandale, Aditi and Joshi, Manali and Sengupta, Durba} } @article {47575, title = {Mechanical and microstructural studies in a polysaccharide-acrylate double network hydrogel}, journal = {Journal of the Mechanical Behavior of Biomedical Materials}, volume = {124}, year = {2021}, month = {DEC}, pages = {104839}, type = {Article}, abstract = {Polymeric hydrogels continue to find a wide range of applications. However, a major drawback of hydrogels is the lack of mechanical strength. In this regard, {\textquoteleft}{\textquoteleft}Double Network Hydrogels{\textquoteright}{\textquoteright} (DN) have shown great promise recently. The toughness in DN hydrogels originates from the synergistic effect of two polymeric networks. In this work, we have synthesized a DN hydrogel consisting of a tightly cross linked carboxymethylcellulose (CMC) as the first network and loosely cross linked poly(hydroxyethylacrylate) (PHEA) as a second network (CMC-PHEADN). The required flexibility in the second network (PHEA) was induced by the presence of a small amount of stearyl methacrylate (SM) as a co-monomer in hydroxyl ethyl acrylate (HEA). The compressive strength of the CMC-PEHA-DN hydrogel was found to be 280 times more than that of CMC-SN hydrogel, and the presence of SM in DN hydrogels showed better recovery after deformation. Cell viability studies showed the biocompatibility of DN hydrogels. The micro-structural analysis of DN xerogels by 3D X-ray Microtomography indicated the presence of oriented pores in size range of 30-40 mu m. To the best of our knowledge, Microtomography was used for the first time to study the DN gels. These hydrogels can be used to develop implants that can withstand prolonged stress and expand the life span of implants.}, keywords = {Carboxymethyl cellulose, Double network hydrogels, Poly(hydroxyethyl acrylate), Poly(hydroxyethyl-co-stearyl methacrylate)}, issn = {1751-6161}, doi = {10.1016/j.jmbbm.2021.104839}, author = {Torris, Arun and Nair, Sanoop and Mol, K. P. Raji and Sengupta, Poulomi and Badiger, Manohar} } @article {47430, title = {Mechanism of adhesion of natural polymer coatings to chemically modified siloxane polymer}, journal = {Langmuir}, volume = {37}, year = {2021}, month = {MAR }, pages = {2974-2984}, type = {Article}, abstract = {

Surface coatings play an important role in improving the performance of biomedical implants. Polydimethylsiloxane (PDMS) is a commonly used material for biomedical implants, and surface-coated PDMS implants frequently face problems such as delamination or cracking of the coating. In this work, we have measured the performance of nano-coatings of the biocompatible protein polymer silk fibroin (SF) on pristine as well as modified PDMS surfaces. The PDMS surfaces have been modified using oxygen plasma treatment and 3-amino-propyltriethoxy-silane (APTES) treatment. Although these techniques of PDMS modification have been known, their effects on adhesion of SF nano-coatings have not been studied. Interestingly, testing of the coated samples using a bulk technique such as tensile and bending deformation showed that the SF nano-coating exhibits improved crack resistance when the PDMS surface has been modified using APTES treatment as compared to an oxygen plasma treatment. These results were validated at the microscopic and mesoscopic length scales through nano-scratch and nano-indentation measurements. Further, we developed a unique method using modified atomic force microscopy to measure the adhesive energy between treated PDMS surfaces and SF molecules. These measurements indicated that the adhesive strength of PDMS-APTES-SF is 10 times more compared to PDMS-O-2-SF due to the higher number of molecular linkages formed in this nanoscale contact. This lower number of molecular linkages in the PDMS-O-2 indicates that only fewer numbers of surface hydroxyl groups interact with the SF protein through secondary interactions such as hydrogen bonding. On the other hand, a larger number of amine groups present on PDMS-APTES surface hydrogen bond with the polar amino acids present on the silk fibroin protein chain, resulting in better adhesion. Thus, APTES modification to the PDMS substrate results in improved adhesion of nano-coating to the substrate and enhances the delamination and crack resistance of the nano-coatings.

}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.1c00047}, author = {Joseph, Emmanuel and Rajput, Shatruhan Singh and Patil, Shivprasad and Nisal, Anuya} } @article {47123, title = {Metabolic engineering and synthetic biology for isoprenoid production in Escherichia coli and Saccharomyces cerevisiae}, journal = {Applied Microbiology and Biotechnology}, volume = {105}, year = {2021}, month = {JAN}, pages = {457-475}, type = {Review}, abstract = {

Isoprenoids, often called terpenoids, are the most abundant and highly diverse family of natural organic compounds. In plants, they play a distinct role in the form of photosynthetic pigments, hormones, electron carrier, structural components of membrane, and defence. Many isoprenoids have useful applications in the pharmaceutical, nutraceutical, and chemical industries. They are synthesized by various isoprenoid synthase enzymes by several consecutive steps. Recent advancement in metabolic engineering and synthetic biology has enabled the production of these isoprenoids in the heterologous host systems like Escherichia coli and Saccharomyces cerevisiae. Both heterologous systems have been engineered for large-scale production of value-added isoprenoids. This review article will provide the detailed description of various approaches used for engineering of methyl-d-erythritol-4-phosphate (MEP) and mevalonate (MVA) pathway for synthesizing isoprene units (C-5) and ultimate production of diverse isoprenoids. The review particularly highlighted the efforts taken for the production of C-5-C-20 isoprenoids by metabolic engineering techniques in E. coli and S. cerevisiae over a decade. The challenges and strategies are also discussed in detail for scale-up and engineering of isoprenoids in the heterologous host systems.

}, keywords = {Escherichia coli, Isoprenoids, Metabolic engineering, Saccharomyces cerevisiae, synthetic biology}, issn = {0175-7598}, doi = {10.1007/s00253-020-11040-w, Early Access Date = JAN 2021}, author = {Navale, Govinda R. and Dharne, Mahesh S. and Shinde, Sandip S.} } @article {47337, title = {Micro-computed tomographic analysis of the marginal adaptation of a calcium silicate-based cement to radicular dentin after removal of three different intracanal medicaments - an in vitro study}, journal = {Journal of Conservative Dentistry}, volume = {23}, year = {2021}, month = {FEB}, pages = {598-603}, type = {Article}, abstract = {

Context:\ This study focuses on the marginal adaptation of a calcium silicate-based cement to the root dentin after retrieval of different intracanal medicaments.

Aim:\ This study compared the marginal adaptation of a calcium silicate-based cement to radicular dentin in the apical third of the root canal following the use of three different intracanal medicaments.

Materials and methods:\ Forty single-rooted premolar teeth (n\ = 40) were decoronated 13 mm above the root apices; then, 3 mm of the root tips were resected to standardize the root length. Orthograde cleaning and shaping were done using the rotary files and apical enlargement using peeso reamers. Depending on the intracanal medicament used, the samples were equally divided into four groups: Group 1 - control, Group 2 - Metapex, Group 3 - triple antibiotic paste (TAP), and Group 4 - calcium hydroxide with Propolis. Subsequently, the medicament was removed and a 3 mm apical barrier of BiodentineTM\ was placed and later scanned using an ex vivo micro-computed tomography scanner.

}, doi = {10.4103/JCD.JCD_561_20}, author = {Jain, Ruchika Nirmal and Abraham, Sathish and Karad, Rohini Ramesh and Najan, Harshal Balasaheb and Vaswani, Sneha Dhruvkumar and Torris, Arun} } @article {47359, title = {Microscopic theory of softness in supercooled liquids}, journal = {Physical Review Letters}, volume = {126}, year = {2021}, month = {MAY }, pages = {208001}, type = {Article}, abstract = {

We introduce a new measure of the structure of a liquid which is the softness of the mean-field potential developed by us earlier. We find that this softness is sensitive to small changes in the structure. Then, we study its correlation with the supercooled liquid dynamics. The study involves a wide range of liquids (fragile, strong, attractive, repulsive, and active) and predicts some universal behaviors such as the softness being linearly proportional to the temperature and inversely proportional to the activation barrier of the dynamics with system dependent proportionality constants. We establish a master equation between the dynamics and the softness parameter and show that, indeed, the dynamics, when scaled by the temperature and system dependent parameters, show a data collapse when plotted against softness. The dynamics of fragile liquids show a strong softness dependence, whereas that of strong liquids show a much weaker softness dependence. We also connect the present study with the earlier studies of softness involving machine learning (ML), thus, providing a theoretical framework for understanding the ML results.

}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.126.208001}, author = {Nandi, Manoj Kumar and Bhattacharyya, Sarika Maitra} } @article {46681, title = {Milder operating parameters for one-step conversion of fructose to levulinic acid over sulfonated H-beta zeolite in aqueous media}, journal = {Environmental Progress \& Sustainable Energy}, volume = {40}, year = {2021}, month = {JAN}, pages = {e13530}, type = {Article}, abstract = {

The sulfonated H-beta zeolite was successfully prepared and used for the synthesis of levulinic acid (LA) fromD-fructose. The catalyst was characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscope, N-2 physisorption, NH3-temperature programmed desorption and carbon-hydrogen-nitrogen-sulfur analysis. The total acid amount is increased with increase in sulfur loading, confirmed that the sulfonic acid group (SO3-H) is successfully grafted onto zeolite structure. The various parameters such as different amount of sulfur loading, reaction temperature, time, catalyst loading was studied for selective production of LA. The catalytic activity of sulfonated H-beta (S-beta) zeolite was found to be efficient for synthesis of LA from D-fructose in aqueous media. Maximum LA yield of 43.5 mol\%, low HMF yield (\<1\%) with 98.15\% fructose conversion was obtained with 3\% S-beta catalyst at 160 degrees C for 7 hr. The catalyst was reusable for minimum three times by H2O2 regeneration. This study provides the new zeolitic catalyst for the efficient production of LA at shorter reaction time (7 hr) and low catalyst to substrate ratio (0.7:1).

}, keywords = {conversion, D-fructose, H-beta, HMF, levulinic acid, sulfonated zeolite, yield}, issn = {1944-7442}, doi = {10.1002/ep.13530, Early Access Date = OCT 2020}, author = {Bisen, Swapneel K. and Niphadkar, Prashant S. and Nandanwar, Sachin U. and Simakova, Irina and Bokade, Vijay V.} } @article {47811, title = {Milder operating parameters for one-step conversion of fructose to levulinic acid over sulfonated H-β zeolite in aqueous media}, journal = {Environmental Progress \& Sustainable Energy}, volume = {40}, year = {2021}, month = {FEB}, pages = {e13530}, type = {Article}, abstract = {Abstract The sulfonated H-β zeolite was successfully prepared and used for the synthesis of levulinic acid (LA) from D-fructose. The catalyst was characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscope, N2 physisorption, NH3-temperature programmed desorption and carbon{\textendash}hydrogen{\textendash}nitrogen{\textendash}sulfur analysis. The total acid amount is increased with increase in sulfur loading, confirmed that the sulfonic acid group (SO3-H) is successfully grafted onto zeolite structure. The various parameters such as different amount of sulfur loading, reaction temperature, time, catalyst loading was studied for selective production of LA. The catalytic activity of sulfonated H-β (S-β) zeolite was found to be efficient for synthesis of LA from D-fructose in aqueous media. Maximum LA yield of 43.5 mol\%, low HMF yield (<1\%) with 98.15\% fructose conversion was obtained with 3\% S-β catalyst at 160{\textdegree}C for 7 hr. The catalyst was reusable for minimum three times by H2O2 regeneration. This study provides the new zeolitic catalyst for the efficient production of LA at shorter reaction time (7 hr) and low catalyst to substrate ratio (0.7:1).}, keywords = {conversion, D-fructose, H-β, HMF, levulinic acid, sulfonated zeolite, yield}, doi = {10.1002/ep.13530}, url = {https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/ep.13530}, author = {Bisen, Swapneel K. and Niphadkar, Prashant S. and Nandanwar, Sachin U. and Simakova, Irina and Bokade, Vijay V.} } @article {47104, title = {Myristic acid derived sophorolipid: efficient synthesis and enhanced antibacterial activity}, journal = {ACS Omega}, volume = {6}, year = {2021}, month = {JAN}, pages = {1273-1279}, type = {Article}, abstract = {

Microbial glycolipids are one of the most interesting alternatives to chemical-based surfactants as they exhibit improved biodegradability and less toxicity. However, their potential has been limited because of specificity of the yeast toward fatty acids having a carbon 16 or carbon 18 chain. This study focuses on sophorolipid (SL) production by the yeast Starmerella bombicola using myristic acid, a medium-chain carbon-14 fatty acid that has not been used as a substrate for SL production. The production was optimized for inoculum size and lipophilic substrate concentration. Furthermore, we also studied the effect of medium-chain fatty acid on yeast cell growth and optimized the process for excellent yield. The myristic acid SL (MASL) so synthesized consisted of mono- and diacetylated forms with preferential glycosylation at the methyl end group, as determined by high-resolution mass spectrometry. Individual congeners of the crude mixture were separated using dry column chromatography and then structurally characterized by mass spectrometry. The synthesized MASL was also shown to have promising surface tension, lowering abilities with a low CMC of 14 mg/L. The SL derived from myristic acid exhibited superior antibacterial activity as compared to SL derived from oleic acid. MASL was also found to be more potent against Gram-positive organisms as compared to Gram-negative organisms. This work, therefore, demonstrates successful synthesis of myristic acid-derived SL and its superior antibacterial activity, establishing a promising future for this biosurfactant.

}, issn = {2470-1343}, doi = {10.1021/acsomega.0c04683}, author = {Abhyankar, Isha and Sevi, Ganesh and Prabhune, Asmita A. and Nisal, Anuya and Bayatigeri, Santhakumari} } @article {47776, title = {Neem derivatives inhibits tau aggregation}, journal = {Journal of Alzheimer s Disease Reports}, volume = {3}, year = {2021}, month = {JAN}, pages = {169-178}, type = {Article}, abstract = {Tau is a phosphoprotein with natively unfolded conformation that functions to stabilize microtubules in axons. Alzheimer{\textquoteright}s disease pathology triggers several modifications in tau, which causes it to lose its affinity towards microtubule, thus, leading to microtubule disassembly and loss of axonal integrity. This elicit accumulation of tau as paired helical filaments is followed by stable neurofibrillary tangles formation. A large number of small molecules have been isolated from Azadirachta indica with varied medicinal applications. The intermediate and final limonoids, nimbin and salannin respectively, isolated from Azadirachta indica, were screened against tau aggregation. ThS and ANS fluorescence assay showed the role of intermediate and final limonoids in preventing heparin induced cross-β sheet formation and also decreased hydrophobicity, which are characteristic nature of tau aggregation. Transmission electron microscopy studies revealed that limonoids restricted the aggregation of tau to fibrils; in turn, limonoids led to the formation of short and fragile aggregates. Both the limonoids were non-toxic to HEK293T cells thus, substantiating limonoids as a potential lead in overcoming Alzheimer{\textquoteright}s disease.}, doi = {10.3233/ADR-190118}, author = {Nalini, Gorantla Vijay and Das, Rashmi and Mulani, Fayaj Alam and Thulasiram, Hirekodathakallu V. and Chinnathambi, Subashchandrabose} } @article {47650, title = {One-pot bioconversion of tomato waste into poly-gamma-glutamic acid (gamma-PGA) biopolymer by a novel biocatalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {9}, year = {2021}, month = {NOV }, pages = {14330-14334}, type = {Article}, abstract = {Landfilling of rotten tomatoes can lead to environmental instability and a huge economic loss to the producers. This letter reports an effective valorization of tomato waste into a promising biopolymer, i.e., poly-gamma-glutamic acid (gamma-PGA) by a novel biocatalyst Bacillus paralicheniformis NCIM 5769. The gamma-PGA is one of the most expensive biopolymers with multifarious applications in wound healing, drug delivery, and regenerative medicine fields. However, its adoption into various applications is finite due to its exorbitant production cost. Herein, rotten tomatoes (without additional nutrient supplementation) served as the chassis for the fermentative production of 40 g/L of highly pure gamma-PGA within 48 h at ambient temperature. Further, NMR, DSC, and TGA confirmed the purity of synthesized gamma-PGA identical to standard gamma-PGA. This process has potential in the commercialization of.-PGA by significantly reducing the production cost, followed by the effective utilization of tomato waste leading to United Nations Sustainable Development Goal 12 (i.e., ensure sustainable consumption and production patterns).}, keywords = {Commercialization, Poly-gamma-glutamic acid, Rotten tomatoes, United Nations Sustainable Development Goals, Waste utilization}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.1c05362}, author = {Nair, Pranav G. and Joseph, Emmanuel and Killi, Naresh and Konchada, Sravanya and Nisal, Anuya and Gundloori, Rathna Venkata Naga and Dharne, Mahesh S.} } @article {47116, title = {One-pot cascade conversion of renewable furfural to levulinic acid over a bifunctional H3PW12O40SiO2 catalyst in the absence of external H-2}, journal = {Energy \& Fuels}, volume = {35}, year = {2021}, month = {JAN }, pages = {539-545}, type = {Article}, abstract = {

The conversion of biomass-derived furfural (FUR) to levulinic acid (LA), a versatile platform chemical, involves catalytic hydrogenation of FUR followed by acid hydrolysis to LA. However, this two-step process demands expensive separation and purification of the furfuryl alcohol (FAL) intermediate. Herein, we demonstrate an ingenious catalytic strategy for the one-pot cascade conversion of FUR to LA over a bifunctional catalyst without using pure external H-2. Isopropyl alcohol (IPA) served a dual role as a hydrogen donor and solvent while inhibiting the side reactions. Catalysts with a tunable surface area and acidity were synthesized by impregnating different percentages of H3PW12O40 (heteropolyacid) over a SiO2 support. The bifunctionality of the H3PW12O40/SiO2 catalyst is ascribed to the mutual coexistence of Lewis and Brvinsted acid sites. The Lewis acid sites imparted by active W metal sites adsorb hydrogen proton for catalytic transfer hydrogenation of FUR to FAL, while the predominant Brvinsted acid sites catalyze the hydrolysis of FAL to LA. Consequently, H3PW12O40/SiO2 revealed to be a potential catalyst producing an similar to 51\% LA yield under optimized reaction conditions. Moreover, the catalyst was found to be reusable for three catalytic cycles. This study paves the way to develop future biorefinery, particularly direct conversion of FUR to LA over a bifunctional catalyst with a liquid H-donor, in an environmentally benign manner and comply with the green chemistry principles.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.0c03326}, author = {Nandiwale, Kakasaheb Y. and Vishwakarma, Mona and Rathod, Simmy and Simakova, Irina and Bokade, Vijay V.} } @article {47409, title = {Orc4 spatiotemporally stabilizes centromeric chromatin}, journal = {Genome Research}, volume = {31}, year = {2021}, month = {APR}, pages = {607-621}, type = {Article}, abstract = {

The establishment of centromeric chromatin and its propagation by the centromere-specific histone CENPA is mediated by epigenetic mechanisms in most eukaryotes. DNA replication origins, origin binding proteins, and replication timing of centromere DNA are important determinants of centromere function. The epigenetically regulated regional centromeres in the budding yeast Candida albicans have unique DNA sequences that replicate earliest in every chromosome and are clustered throughout the cell cycle. In this study, the genome-wide occupancy of the replication initiation protein Orc4 reveals its abundance at all centromeres in C. albicans. Orc4 is associated with four different DNA sequence motifs, one of which coincides with tRNA genes (tDNA) that replicate early and cluster together in space. Hi-C combined with genome-wide replication timing analyses identify that early replicating Orc4-bound regions interact with themselves stronger than with late replicating Orc4-bound regions. We simulate a polymer model of chromosomes of C. albicans and propose that the early replicating and highly enriched Orc4-bound sites preferentially localize around the clustered kinetochores. We also observe that Orc4 is constitutively localized to centromeres, and both Orc4 and the helicase Mcm2 are essential for cell viability and CENPA stability in C. albicans. Finally, we show that new molecules of CENPA are recruited to centromeres during late anaphase/telophase, which coincides with the stage at which the CENPA-specific chaperone Scm3 localizes to the kinetochore. We propose that the spatiotemporal localization of Orc4 within the nucleus, in collaboration with Mcm2 and Scm3, maintains centromeric chromatin stability and CENPA recruitment in C. albicans.

}, issn = {1088-9051}, doi = {10.1101/gr.265900.120}, author = {Sreekumar, Lakshmi and Kumari, Kiran and Guin, Krishnendu and Bakshi, Asif and Varshney, Neha and Thimmappa, Bhagya C. and Narlikar, Leelavati and Padinhateeri, Ranjith and Siddharthan, Rahul and Sanyal, Kaustuv} } @article {46700, title = {Oxime ligands for Pd catalysis of the mizoroki-heck reaction, suzuki-miyaura coupling \& annulation reactions}, journal = {Synthetic Communications}, volume = {51}, year = {2021}, month = {JAN }, pages = {308-316}, type = {Article}, abstract = {

Monodentate and bidentate chelating oximes are readily available ligands for the Pd catalysis of the Mizoroki-Heck reaction and the Suzuki coupling. High yields were obtained in the Suzuki coupling in aqueous dioxane with TBABr as additive. The oximes can be easily synthesized from the corresponding ketones or aldehydes and thus provide a very large number of nitrogen-based ligands. They have the advantage of not undergoing oxidative degradation, common for phosphine ligands. Chelating oximes with Pd(OAc)(2), activate aryl iodides to give high yields of the substitution products in the Mizoroki-Heck reactions as well as the Suzuki coupling. Acetophenone oxime ligand with Pd(OAc)(2), catalyzed the reaction of aryl iodides with 1,2-disubstituted alkenes in moderate to high yields. As a test example, the LaRock indole annulation and synthesis of isocoumarin were achieved with acetophenone oxime ligand and Pd(OAc)(2)in high yields.

}, keywords = {Isocoumarin, LaRock annulation, Mizoroki-Heck reaction, oximes, Suzuki coupling}, issn = {0039-7911}, doi = {10.1080/00397911.2020.1826969, Early Access Date = SEP 2020}, author = {Bangar, Pronnoy G. and Nahide, Pradip D. and Meroliya, Heena K. and Waghmode, Shobha A. and Iyer, Suresh} } @article {47816, title = {Oxime ligands for Pd catalysis of the mizoroki{\textendash}heck reaction, Suzuki{\textendash}Miyaura coupling \& annulation reactions}, journal = {Synthetic Communications}, volume = {51}, year = {2021}, month = {JAN}, pages = {308-316}, type = {Article}, abstract = {AbstractMonodentate and bidentate chelating oximes are readily available ligands for the Pd catalysis of the Mizoroki{\textendash}Heck reaction and the Suzuki coupling. High yields were obtained in the Suzuki coupling in aqueous dioxane with TBABr as additive. The oximes can be easily synthesized from the corresponding ketones or aldehydes and thus provide a very large number of nitrogen-based ligands. They have the advantage of not undergoing oxidative degradation, common for phosphine ligands. Chelating oximes with Pd(OAc)2, activate aryl iodides to give high yields of the substitution products in the Mizoroki{\textendash}Heck reactions as well as the Suzuki coupling. Acetophenone oxime ligand with Pd(OAc)2, catalyzed the reaction of aryl iodides with 1,2-disubstituted alkenes in moderate to high yields. As a test example, the LaRock indole annulation and synthesis of isocoumarin were achieved with acetophenone oxime ligand and Pd(OAc)2 in high yields.}, doi = {10.1080/00397911.2020.1826969}, author = {Bangar, Pronnoy G. and Nahide, Pradip D. and Meroliya, Heena K. and Waghmode, Shobha A. and Iyer, Suresh} } @article {46596, title = {Partially bio-based furyl-functionalized organosoluble poly(ether ether ketone)s}, journal = {Polymer International}, volume = {70}, year = {2021}, month = {AUG}, type = {Article}, abstract = {

A new series of partially bio-based (co)poly(ether ether ketone)s bearing pendent furyl groups was synthesized by nucleophilic aromatic substitution polycondensation of varying molar proportions of 4,4 {\textquoteleft}-(furan-2-ylmethylene)bis(2-methoxyphenol) and bisphenol-A with 4,4 {\textquoteleft}-difluorobenzophenone. The chemical structures, compositions and random nature of (co)poly(ether ether ketone)s were confirmed by NMR spectroscopy. Inherent viscosities and number-average molecular weights of the (co)poly(ether ether ketone)s were in the range 0.74-2.90 dL g(-1) and 33 500-46 300 g mol(-1), respectively, indicating the formation of reasonably high molecular weight polymers. (Co)poly(ether ether ketone)s were readily soluble in common organic solvents and could be cast into tough, transparent and flexible films from chloroform solutions. (Co)poly(ether ether ketone)s exhibited 10\% weight loss and glass transition temperatures in the range 429-464 and 152-156 degrees C, respectively. A representative copoly(ether ether ketone) was crosslinked with 1,1 {\textquoteleft}-(methylenedi-1,4-phenylene)bismaleimide via Diels-Alder reaction to form a crosslinked polymer which showed improved mechanical properties and was recycled twice without significant loss of mechanical properties. Diels-Alder/retro Diels-Alder reaction was demonstrated by studies of sol-gel transformation, solubility tests, DSC and stress-strain measurements. (c) 2020 Society of Chemical Industry

}, keywords = {aromatic poly(ether ether ketone)s, bio-based, crosslinking, Diels-Alder reaction, pendent furyl groups}, issn = {0959-8103}, doi = {10.1002/pi.6160}, author = {Kuhire, Sachin S. and Talanikar, Aniket A. and Tawade, V, Bhausaheb and Nagane, Samadhan S. and Wadgaonkar, Prakash P.} } @article {47376, title = {Polyaryletherketone in energy conversion and storage devices - a highly tailorable material with versatile properties}, journal = {Polymer International}, volume = {70}, year = {2021}, month = {AUG}, pages = {1026-1037}, type = {Review}, abstract = {

Polymers have been a highly useful class of material for the last few decades owing to their ease of bulk production and fabrication. With the myriad of applications in day to day life, they have also found an important role in energy conversion and storage devices, not just as a housing material of the device but with an important role in the energy conversion process. Among the several polymers used in this area, polyaryletherketones (PAEKs) are one of the most versatile materials owing to their easy tailorability. The ether and ketone groups can be introduced in the main polymer chain in several ways to achieve the desired material properties. The main role of a polymer in an energy conversion device is that of a barrier to avoid the mixing of reactants and to selectively transport ions from one electrode to the other to maintain charge neutrality. The polymer membrane finds application in various electrochemical energy conversion devices such as fuel cells, lithium ion batteries, redox flow batteries, supercapacitors etc. The main focus of this work is to briefly review the extent of development in the PAEKs in various energy conversion and storage devices. (c) 2021 Society of Industrial Chemistry.

}, keywords = {electrolyte membrane, energy conversion and storage, fuel cells, lithium ion batteries, redox flow batteries, separator}, issn = {0959-8103}, doi = {10.1002/pi.6233, Early Access Date = APR 2021}, author = {Feroze Gooty Saleha, Wasim and Nalajala, Naresh and Neergat, Manoj} } @article {47411, title = {Poly-gamma-glutamic acid biopolymer: a sleeping giant with diverse applications and unique opportunities for commercialization}, journal = {Biomass Conversion and Biorefinery}, year = {2021}, month = {APR}, type = {Review; Early Access}, abstract = {

Poly-gamma-glutamic acid (gamma-PGA) is a biodegradable, non-toxic, ecofriendly, and non-immunogenic biopolymer. Its phenomenal properties have gained immense attention in the field of regenerative medicine, the food industry, wastewater treatment, and even in 3D printing bio-ink. The gamma-PGA has the potential to replace synthetic non-degradable counterparts, but the main obstacle is the high production cost and lower productivity. Extensive research has been carried out to reduce the production cost by using different waste; however, it is unable to match the commercialization needs. This review focuses on the biosynthetic mechanism of gamma-PGA, its production using the synthetic medium as well as different wastes by L-glutamic acid-dependent and independent microbial strains. Furthermore, various metabolic engineering strategies and the recovery processes for gamma-PGA and their possible applications are discussed. Finally, highlights on the challenges and unique approaches to reduce the production cost and to increase the productivity for commercialization of gamma-PGA are also summarized.

}, keywords = {Commercialization, Multi-nutritious, Poly-gamma-glutamic acid, Waste valorization}, issn = {2190-6815}, doi = {10.1007/s13399-021-01467-0, Early Access Date = APR 2021}, author = {Nair, Pranav and Navale, Govinda R. and Dharne, Mahesh S.} } @article {47748, title = {Possible electron doping of geometrically perfect spin-1/2 kagome-lattice barlowite by reduced graphene oxide}, journal = {Physical Review B}, volume = {104}, year = {2021}, month = {SEP }, pages = {L100418}, type = {Letter}, abstract = {Doping of quantum spin liquid (QSL) insulators by electron or hole leads to intriguing phase transitions to metallic and superconducting states. The barlowite family with geometrically perfect S = 1/2 kagome planes and tunable interkagome coupling is an emerging platform to realize spin-ordered, valence bond crystal, QSL states. Theoretical investigations on electron doping revealed localized states in the band gap of barlowite unlike metallicity in cuprate (Nd2CuO4). We present successful anchoring of phase-pure barlowite crystallites onto reduced graphene oxide (rGO). The resulting barlowite-rGO system was found to be an electrical semiconductor with Arrhenius activation energy of 0.07 eV. Semiconducting properties of the barlowite-rGO system were further modulated with retention of structural integrity. We have attributed such a transformation of electrical transport response to plausible electron doping thereby making charge-doping experiments on barlowite and its analogs propitious.}, issn = {2469-9950}, doi = {10.1103/PhysRevB.104.L100418}, author = {Gupta, Kriti and Ninawe, Pranay and Jain, Anil and Dadwal, Arun and Anas, M. and Malik, V. K. and Yusuf, S. M. and Joy, Pattayil A. and Ballav, Nirmalya} } @article {47360, title = {Process-induced microstructure in viscose and lyocell regenerated cellulose fibers revealed by SAXS and SEM of acid-etched samples}, journal = {ACS Applied Polymer Materials}, volume = {3}, year = {2021}, month = {MAY }, pages = {2598-2607}, type = {Article}, abstract = {

Regenerated cellulose fibers represent an important class of bioderived commercial fibers. The traditional viscose process requires the use of environmentally harmful carbon disulfide solvent to produce fibers. Lyocell fibers, produced using a more sustainable recent process, exhibit differences in properties from viscose. These differences arise from their semicrystalline microstructure, formed during fiber spinning. It is widely believed that regenerated cellulose fibers predominantly form fringed fibrillar crystals. We optimize acid etching, followed by SEM as an experimental tool to visualize this fibrillar structure. Acid etching provides sufficient topological contrast to directly visualize similar to O(10 nm) fibrils using field-emission scanning electron microscopy (SEM). We combine SEM with small-angle X-ray scattering (SAXS) to reveal other microstructural details. We observe a Bragg peak, indicating the coexistence of stacked lamellar structure with crystalline fibrils for viscose fibers, but not for lyocell. Viscose and lyocell fibers are characterized by partially oriented semicrystalline microstructure. We present a methodology to calculate the Lorentz correction for such microstructure and employ this to analyze the lamellar scattering from viscose fibers using a 1D correlation function approach. We characterize the lamellar microstructure after swelling viscose fibers with water and observe expansion of the Bragg spacing due to water absorption in the amorphous regions. Our data suggest that the water-induced plasticization of amorphous regions is inhomogeneous. Lamellar stacks that are more misoriented from the fiber direction exhibit lower swelling than those along the fiber direction. The experimental methods described in this work reveal interesting details of semicrystalline microstructure in regenerated cellulose fibers, with important implications for the mechanical response of dry and wet fibers. The methods developed here might find use in investigations of other polymer fibers as well.

}, keywords = {acid etching, crystalline lamellae, fibers, fibrils, Lorentz correction, Regenerated cellulose, SAXS}, issn = {2637-6105}, doi = {10.1021/acsapm.1c00204}, author = {Sharma, Aakash and Wankhede, Parnashri and Samant, Roopali and Nagarkar, Shailesh and Thakre, Shirish and Kumaraswamy, Guruswamy} } @article {47702, title = {Rationally designed, efficient, and earth-abundant Ni-Fe cocatalysts for solar hydrogen generation}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {9}, year = {2021}, month = {OCT }, pages = {13915-13925}, type = {Article}, abstract = {Developing highly efficient and affordable catalysts for solar hydrogen (H-2) generation is crucial, and employing a cocatalyst from earth-abundant elements has a critical role to play. In this context, different compositions of earth-abundant Ni-Fe alloy (1:1, 1:3, and 3:1) have been prepared by hydrothermal method; subsequently, 1 wt \% of these Ni-Fe cocatalysts were integrated with TiO2-P25 and thoroughly characterized. The resultant catalysts have been evaluated for solar H-2 production, in powder and thin film forms, under one sun condition and in direct sunlight. Interestingly, all the catalysts in the thin film form exhibit superior hydrogen yield (HY), up to 27 times higher activity than its powder counterpart. Among the photocatalysts, Ni-Fe/TiO2 (3:1 = Ni/Fe; NFT31) composition exhibits the best HY in thin film (8.27 mmol.h(-1).g(-1)) and exceeds all other compositions of catalyst. It is also to be reported that HY measured for the powder form with 1 mg shows 3-17 times higher activity than that measured with 25 mg. This is mainly attributed to effective solar light absorption with a smaller amount of photocatalyst either spread over large area in a thin film form or well-dispersed in suspension forms. Furthermore, the enhanced activity obtained with Ni-Fe/TiO2 photocatalysts is also ascribed to strong electronic integration of Ni-Fe cocatalyst with TiO2 and higher performance obtained with a thin film is attributed to increased charge carrier generation and subsequent charge separation and effective utilization. A decrease in work function of TiO2 by 0.6 eV was observed after its integration with cocatalyst in NFT31.}, keywords = {Cocatalyst, Hydrogen, Ni-Fe alloy, solar energy, TiO2, water splitting}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.1c05158}, author = {Tudu, Bijoy and Nalajala, Naresh and Reddy, Kasala Prabhakar and Saikia, Pranjal and Gopinath, Chinnakonda S.} } @article {47464, title = {Reactions of 2,3-dibromonaphthalene-1,4-dione and pyridyl amines: X-ray structures, DFT investigations, and selective detection of the Hg2+ and Ni2+ ions}, journal = {Engineered Science}, volume = {14}, year = {2021}, month = {FEB}, pages = {78-93}, type = {Article}, abstract = {

In this work, the products formed by the reaction between 2,3-dibromonaphthalene-1,4-dione with (pyridine-2-yl)methanamine and (pyridine-4-yl)methanamine are discussed in detial. The products 2-amino-3-bromonaphthalene-1,4-dione (A) and 2-aminonaphthalene-1,4-dione (B(1)) obtained are characterized through\ 1H and\ 13C-NMR, FTIR, mass spectrometry, single-crystal X-ray diffraction experiments, which are in conjunction with wB97X based density functional theory.\ compound\ A\ can effectively and selectively detect Hg2+\ and Ni2+\ ions, and proposes a potential mechanism of action.

}, issn = {2576-9898}, doi = {10.30919/es8d427}, author = {Aggrwal, Gunjan and Salunke-Gawali, Sunita and Gejji, Shridhar P. and Nikalje, Milind and Chakravarty, Debamitra and Verma, Prakash L. and Gosavi-Mirkute, Prajkta and Harihar, Shital and Jadhav , Mahesh and Puranik, Vedavati G.} } @article {47610, title = {Resolving diverse protein-DNA footprints from exonuclease-based ChIP experiments}, journal = {Bioinformatics}, volume = {37}, year = {2021}, month = {JUL}, pages = {I367-I375}, type = {Article; Proceedings Paper}, abstract = {Motivation: High-throughput chromatin immunoprecipitation (ChIP) sequencing-based assays capture genomic regions associated with the profiled transcription factor (TF). ChIP-exo is a modified protocol, which uses lambda exonuclease to digest DNA close to the TF-DNA complex, in order to improve on the positional resolution of the TF-DNA contact. Because the digestion occurs in the 50-30 orientation, the protocol produces directional footprints close to the complex, on both sides of the double stranded DNA. Like all ChIP-based methods, ChIP-exo reports a mixture of different regions associated with the TF: those bound directly to the TF as well as via intermediaries. However, the distribution of footprints are likely to be indicative of the complex forming at the DNA. Results: We present ExoDiversity, which uses a model-based framework to learn a joint distribution over footprints and motifs, thus resolving the mixture of ChIP-exo footprints into diverse binding modes. It uses no prior motif or TF information and automatically learns the number of different modes from the data. We show its application on a wide range of TFs and organisms/cell-types. Because its goal is to explain the complete set of reported regions, it is able to identify co-factor TF motifs that appear in a small fraction of the dataset. Further, ExoDiversity discovers small nucleotide variations within and outside canonical motifs, which co-occur with variations in footprints, suggesting that the TF-DNA structural configuration at those regions is likely to be different. Finally, we show that detected modes have specific DNA shape features and conservation signals, giving insights into the structure and function of the putative TF-DNA complexes.}, issn = {1367-4803}, doi = {10.1093/bioinformatics/btab274}, author = {Biswas, Anushua and Narlikar, Leelavati} } @article {47788, title = {Review on bio-inspired synthesis of silver nanoparticles: their antimicrobial efficacy and toxicity}, journal = {Engineered Science}, volume = {16}, year = {2021}, month = {JUN}, pages = {90-128}, type = {Review Paper}, abstract = {Silver nanoparticles are one of the most studied compounds in materials science due to their antimicrobial efficacies and, for instance, in photocatalysis, dye-sensitised solar cells, and biomedical devices. However, conventional methods of synthesis of silver nanoparticles (AgNPs) require hazardous and costly chemicals, and a large amount of energy is expended. In this review, efforts have been made to target where eco-friendly synthetic techniques are being conducted using various plant extract to develop nanoparticles in inexpensive, easily scaled up, and environmentally benign. These findings are stimulated intense research activities that focused on synthesis, modification, properties, and applications of these ecofriendly nanoparticles. This review covers all these aspects, such as the biological routes for the synthesis of nanoparticles employed to synthesis the nano-silver using algae, bacteria, plants, fungi, etc. Also, the chemical positions and possible traditional uses of the plants are enlisted.\ }, issn = {2576-9898}, doi = {10.30919/es8d479}, url = {http://dx.doi.org/10.30919/es8d479}, author = {Prasad, S.R. and Teli, S.B. and Ghosh, J. and Prasad, N.R. and Shaikh, V. S. and Nazeruddin, G.M. and Al-Sehemi, Abdullah G. Al and Patel, Imran and Shaikh, Y.I.} } @article {47129, title = {Review on selective production of acetophenone from oxidation of ethylbenzene over heterogeneous catalysts in a decade}, journal = {Catalysis Letters}, year = {2021}, month = {JAN}, type = {Article; Early Access 2021}, abstract = {

The consumption of acetophenone (AP) is increasing worldwide because of its applications in products such as alcohol, aldehydes, resins, esters, fragrances, and pharmaceuticals. AP is manufactured via several methods like decomposition of cumene hydroperoxide, Hock process, and Friedel-Crafts acylation reaction using homogeneous catalysts with solvent and oxidant. However, it causes several environmental problems that deteriorate the production of AP with these methods. Oxidation of ethylbenzene (EB) is one of the promising methods to synthesize AP in liquid and vapor phases reaction using heterogeneous catalysts, which plays a vital role for selective production of AP. In this review, numerous heterogeneous catalysts are discussed including transition metal nanoparticles, transition metal complexes, and metal free catalysts (carbon nanotubes) used in last 10 years for oxidation of EB. Additionally, catalyst activity along with reaction parameters and its effect, mechanisms, and kinetics study are summarized in this article. The future scope of this reaction is also highlighted. Moreover, this work identifies best catalysts for bulk production of AP with high yield to satisfy global requirement.

}, keywords = {acetophenone, ethylbenzene, Heterogeneous catalysts, Oxidation reaction, reaction mechanisms}, issn = {1011-372X}, doi = {10.1007/s10562-020-03474-8, Early Access Date = JAN 2021}, author = {Nandanwar, Sachin U. and Rathod, Simmy and Bansal, Videsha and Bokade, Vijay V.} } @article {47063, title = {Rhizobacterial consortium mediated aroma and yield enhancement in basmati and non-basmati rice ( Oryza sativa L.)}, journal = {Journal of Biotechnology}, volume = {328}, year = {2021}, month = {FEB}, pages = {47-58}, type = {Article}, abstract = {

Basmati and non-basmati rice varieties are commercially important. Aromatic rice varieties are low yielding and recently depletion in aroma is observed due to the shift towards modern agriculture. Therefore, it is necessary to restore the aroma and increase the yield through sustainable agriculture. The use of microbial bioinoculants is one of the promising ways to achieve these targets. With these objectives, rhizospheric bacterial strains Enterobacter hormaechei (AM122) and Lysinibacillus xylanilyticus (DB25) having the property of synthesizing 2acetyl-1-pyrroline (2AP) were isolated from the rhizosphere of two aromatic rice varieties, Ambemohar-157 and Dehradun Basmati respectively and their effect on plant growth, aroma and yield enhancement under mono-inoculation and consortium conditions was analyzed. The bacterial inoculum in consortium resulted in significant improvement in vegetative growth, yield and 2AP content over mono inoculation and control. The study highlights the potential of E. hormaechei and L. xylanilyticus in plant growth, yield and aroma enhancement in basmati and non-basmati rice varieties. These strains can be taken up further for developing a commercial bioformulation.

}, keywords = {2-Acetyl-1-pyrroline, Basmati rice, Non-basmati rice, plant growth promotion, Rhizosphere, yield}, issn = {0168-1656}, doi = {10.1016/j.jbiotec.2021.01.012}, author = {Dhondge, Harshal V. and Pable, Anupama A. and Barvkar, Vitthal T. and Dastager, Syed G. and Nadaf, Altafhusain B.} } @article {47632, title = {Salts, solvates and hydrates of the multi-kinase inhibitor drug pazopanib with hydroxybenzoic acids}, journal = {Crystengcomm}, volume = {23}, year = {2021}, month = {SEP}, pages = {5994-6011}, type = {Article}, abstract = {The marketed formulation of pazopanib (PAZ) suffers from low and variable bioavailability because of its poor dissolution rate and photostability issues. The drug falls under Biopharmaceutics Classification System (BCS) class II of low solubility and good permeability. The hydrogen bonds and supramolecular interactions in crystalline forms of PAZ with hydroxybenzoic acids (HBAs) and dihydroxybenzoic acids (DHBAs), as well as its salts are analyzed. Ten X-ray crystal structures of PAZ which include the reference drug, a tetrahydrofuran solvate (PAZ center dot THF) and eight salts with HBAs/DHBAs are reported. There is proton transfer from the carboxylic group of the coformer acid to the most basic nitrogen atom of the 2-aminopyrimidine ring of PAZ in all cases. Two salts were crystallized in neat form, while the remaining six are solvates and hydrates. The crystal structure of PAZ is stabilized by sulfonamide and 2-aminopyrimidine homosynthons of N-HMIDLINE HORIZONTAL ELLIPSISO and N-HMIDLINE HORIZONTAL ELLIPSISN hydrogen bonds in an R2(2)(8) ring motif. PAZ center dot HBA/DHBA salts consistently contain the aminopyridiniumMIDLINE HORIZONTAL ELLIPSIScarboxylate N+-HMIDLINE HORIZONTAL ELLIPSISO- synthon of the R2(2)(8) ring. The sulfonamide homosynthon of PAZ is disrupted in preference to the formation of N-HMIDLINE HORIZONTAL ELLIPSISO and N-HMIDLINE HORIZONTAL ELLIPSISN hydrogen bonds in salt structures. The presence of an additional basic nitrogen atom in the indazole ring of PAZ promotes hydration and solvation through the O-HMIDLINE HORIZONTAL ELLIPSISN hydrogen bond. Whereas the formation of salts is desirable for pharmaceutical formulation, the inclusion of adventitious solvent and/or water molecules with hydroxybenzoic acid coformers in the cocrystal-salt products is a limitation for this class of coformers. The stability problem faced with hydrates and solvates of PAZ center dot HBA/DHBA salts means that their formation must be carried out by strictly anhydrous procedures. The consistent occurrence of the aminopyridiniumMIDLINE HORIZONTAL ELLIPSIScarboxylate N+-HMIDLINE HORIZONTAL ELLIPSISO- ring synthon is discussed in relation to the previous results of Aakeroy, Nangia and Zaworotko groups on similar acid-base multi-component systems.}, doi = {10.1039/d1ce00785h}, author = {Rai, Sunil K. and Baidya, Debjani and Nangia, Ashwini K.} } @article {47101, title = {Scalable and thin film approach for solar hydrogen generation: a review on enhanced photocatalytic water splitting}, journal = {Journal of Materials Chemistry A}, volume = {9}, year = {2021}, month = {JAN}, pages = {1353-1371}, type = {Review}, abstract = {

Although nearly five decades of efforts have gone into solar water splitting (SWS), still success eludes and there is no big breakthrough till date. While huge importance is given either individually or concurrently to the three fundamental steps, namely, light absorption, charge carrier separation and diffusion and charge utilization at redox sites, many aspects that are practically helpful to improve the efficiency are not widely discussed and practised. Nonetheless, by adopting a number of small, but significant changes, solar hydrogen production can be enhanced. The present review discusses such different approaches employed for photocatalytic water splitting reported in the literature. For example, an increase of up to two orders of magnitude in solar hydrogen generation was observed with a film form compared to the particulate form of the same catalyst. Discussion on various approaches of enhanced hydrogen production under sunlight and one sun conditions is the main focus of this review, in particular with thin-film forms. The merits and demerits of thin film and particulate methods, respectively, are addressed in detail. Potential methods and successful stories on scalability are also discussed in the present review. In contrast to charge collection over a long distance in solar cell-based methods, a film-based method discussed shows that the local charge utilisation at a zero applied potential is an attractive feature for SWS. A comparison is provided between the PEC-WS and SWS for solar hydrogen generation, and how far we are from the reality to produce solar hydrogen on an industrial scale. We believe the presently practised diverse evaluation efforts may be truncated to fewer methods such as film-based evaluation and in a focussed manner to tackle the SWS issue towards sustainable production of solar hydrogen.

}, issn = {2050-7488}, doi = {10.1039/d0ta09619a}, author = {Gopinath, Chinnakonda S. and Nalajala, Naresh} } @article {47691, title = {Separation of a diastereomeric diol pair using the mechanical properties of crystals}, journal = {Crystengcomm}, volume = {23}, year = {2021}, month = {OCT}, pages = {7056-7060}, type = {Article}, abstract = {We report the separation of a (2S,3R/S)-3-ethyl-1-phenylhex-5-ene-2,3-diol (ephd) diastereomeric pair with visually indistinguishable acicular morphologies based on their mechanical responses, which is found to be more efficient than conventional separation methods. Furthermore, the molecular crystals of (2S,3R)-ephd show elastic deformation, while (2S,3S)-ephd fractures in a brittle manner under similar conditions.}, doi = {10.1039/d1ce01055g}, author = {Gamidi, Rama Krishna and Dandawate, Monica and Choudhury, Rahul and Tothadi, Srinu and Nangia, Ashwini and Reddy, D. Srinivasa} } @article {47405, title = {Silk fibroin and ceramic scaffolds: comparative in vitro studies for bone regeneration}, journal = {Bioengineering \& Translational Medicine}, year = {2021}, month = {APR}, pages = {e10221}, type = {Article; Early Access}, abstract = {

Synthetic bone void fillers based on calcium ceramics are used to fill cavities in the bone and promote bone regeneration. More recently, silk fibroin (SF), a protein polymer obtained from Bombyx mori silkworm, has emerged as a promising material in bone void filling. In this work, we have compared the safety and efficacy of two types of silk fibroin-based bone void fillers with currently used and commercially available ceramic bone void fillers (based on calcium sulphate, beta tricalcium phosphate, and beta tricalcium phosphate with hydroxyapatite). Further, we have also evaluated these two types of SF scaffolds, which have strikingly different structural attributes. The biocompatibility of these scaffolds was comparable as assessed by cytotoxicity assay, cellular adhesion assay, and immunogenic assay. Ability of the scaffolds to support differentiation of human mesenchymal stem cells (hMSCs) into an osteoblastic lineage was also evaluated in an in vitro differentiation experiment using reverse transcriptase polymerase chain reaction analysis. These results revealed that cells cultured on SF scaffolds exhibit higher expression of early to late markers such as Runx2, BMPs, collagen, osterix, osteopontin, and osteocalcin as compared with ceramic-based scaffolds. This observation was further validated by studying the expression of alkaline phosphatase and calcium deposition. We also show that scaffolds made from same material of SF, but characterized by very different pore architectures, have diverse outcome in stem cell differentiation.

}, keywords = {beta tricalcium phosphate, bone regeneration, bone void filler, calcium sulphate, hMSCs, hydroxyapatite, osteoblasts, scaffold, Silk fibroin}, doi = {10.1002/btm2.10221, Early Access Date = APR 2021}, author = {Deshpande, Rucha and Shukla, Swati and Sayyad, Raeesa and Salunke, Shalmali and Nisal, Anuya and Venugopalan, Premnath} } @article {47377, title = {Solvent free, environment benign synthesis of 1,4-dihydropyridines and polyhydroquinolines by using heterogeneous Zn/MCM-41 catalyst}, journal = {Research on Chemical Intermediates}, volume = {47}, year = {2021}, month = {AUG}, pages = {3263-3287}, type = {Article}, abstract = {

Heterogeneous catalysis has been utilized in number of efficient reactions with higher selectivity of the product, more stable, reusable and easy for separation as compared to homogeneous catalysts. Generally, heterogeneous catalysts are prepared by using mesoporous materials, microporous materials, metal oxides and metal organic framework. The mesoporous materials have small particle size and high surface area as compared to the microporous materials. The adsorbent mesoporous materials have highly efficient for the therapeutic applications in chemistry hence it has best as compared to other heterogeneous materials. Herein, we have reported synthesis of 1,4-dihydropyridines and polyhydroquinolines at solvent free and environmental benign condition in the presence of Zn/MCM-41 catalyst. The present protocol gives excellent yield (89-96\%) of the product within short reaction time by easy work up procedure and no need of further purification of product. The catalyst was characterized by XRD diffractometer, SEM, EDAX, TGA-DTA, BET surface area analysis and FT-IR Spectroscopy. The synthesized organic compounds were characterized by FT-IR, H-1 NMR, C-13 NMR, LC-MS spectrometry.

}, keywords = {High activity, High selectivity, mesoporous materials, microporous materials, Reusability of catalyst}, issn = {0922-6168}, doi = {10.1007/s11164-021-04473-z, Early Access Date = APR 2021}, author = {Dhengale, Shankar D. and Naik, Vaibhav M. and Kolekar, Govind B. and Rode, Chandrashekhar V. and Anbhule, Prashant V.} } @article {47692, title = {Synthesis of new 2-(thiazol-4-yl)thiazolidin-4-one derivatives as potential anti-mycobacterial agents}, journal = {Bioorganic Chemistry}, volume = {115}, year = {2021}, month = {OCT}, pages = {105192}, type = {Article}, abstract = {To search for potent antimycobacterial lead compounds, a new series of 3-substituted phenyl-2-(2-(substituted phenyl)thiazol-4-yl) thiazolidin-4-one (5a-t) derivatives have been synthesized by the condensation of 2 substituted phenyl thiazole-4-carbaldehyde with aromatic amine followed by cyclocondensation with thioglycolic acid. The structure of the newly synthesized 2-(thiazol-4-yl)thiazolidin-4-one derivatives were characterized by the spectroscopic analysis. The synthesized compounds were screened for antimycobacterial activity against Mycobacterium tuberculosis H37Ra (MTB) (ATCC 25177) and Mycobacterium bovis BCG (BCG, ATCC 35743). Most of the 2-(thiazol-4-yl)thiazolidin-4-one derivatives showed good to excellent antimycobacterial activity against both the Mtb strains. Nine derivatives 5c, 5g, 5j, 5m, 5n, 5o, 5p, 5s, and 5t showed excellent activity against M. bovis BCG with MIC 4.43 to 24.04 mu M were further evaluated for the cytotoxicity activity against HeLa A549, and HCT-116 cell lines and showed no significant cytotoxic activity at the maximum concentration evaluated. The potential antimycobacterial activities enforced that the thiazolyl-thiazolidin-4-one derivatives could lead to compounds that could treat tuberculosis.}, keywords = {Cytotoxicity, Mycobacterium tuberculosis, Thiazole, Thiazolidin-4-one}, issn = {0045-2068}, doi = {10.1016/j.bioorg.2021.105192}, author = {Abhale, Yogita K. and Shinde, Abhijit and Shelke, Monika and Nawale, Laxman and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {47400, title = {Synthetic heparan sulfate ligands for vascular endothelial growth factor to modulate angiogenesis}, journal = {Chemical Communications}, volume = {57}, year = {2021}, month = {APR }, pages = {3516-3519}, type = {Article}, abstract = {

We report the discovery of a potential heparan sulfate (HS) ligand to target several growth factors using 13 unique HS tetrasaccharide ligands. By employing an HS microarray and SPR, we deciphered the crucial structure-binding relationship of these glycans with the growth factors BMP2, VEGF(165), HB-EGF, and FGF2. Notably, GlcNHAc(6-O-SO3-)-IdoA(2-O-SO3-) (HT-2,6S-NAc) tetrasaccharide showed strong binding with the VEGF(165) growth factor. In vitro vascular endothelial cell proliferation, migration and angiogenesis was inhibited in the presence of VEGF(165) and HT-2,6S-NAc or HT-6S-NAc, revealing the potential therapeutic role of these synthetic HS ligands.

}, issn = {1359-7345}, doi = {10.1039/d1cc00964h}, author = {Jain, Prashant and Shanthamurthy, Chethan D. and Leviatan Ben-Arye, Shani and Yehuda, Sharon and Nandikol, Sharvani S. and Thulasiram, V, Hirekodathakallu and Padler-Karavani, Vered and Kikkeri, Raghavendra} } @article {47592, title = {Tuning the selectivity of CO2 hydrogenation using ceramic hollow fiber catalytic modules}, journal = {Reaction Chemistry \& Engineering}, volume = {6}, year = {2021}, month = {SEP }, pages = {1655-1665}, type = {Article}, abstract = {The unique structural features and advantageous pore distributions of alumina hollow fibers can be exploited to tune the selectivity in heterogeneous catalysis. Formation of a finger-like cavity structure is the unique characteristic of the phase inversion method, which provides a larger surface area to volume ratio desirable for catalytic reactions. This feature, along with a highly porous sandwiched skin layer, makes this architecture superior to conventional powder catalysts or other structured catalyst forms like monoliths. Alumina hollow fibers are prepared by the modified phase inversion method and characterized for their pore size and distribution. Ni metal nanoparticles are uniformly deposited in the Al2O3 hollow fibers to prepare a Ni/Al2O3 catalyst and tested for the CO2 methanation reaction. Suitable reactor and catalyst loading methods are designed and optimized to achieve higher CO2 to methane conversion in a temperature range of 225 to 400 degrees C. The alpha-alumina phase, which is usually reported to be a poor support for Ni in CO2 methanation in the conventional fixed bed configuration, showed high activity when modulated as hollow fibers. Also, the selectivity to CH4 is enhanced and minimal CO formation is observed. The kinetic rate expressions are simulated for the prediction of methane and CO gas evolution at the outlet with temperature. The experimental results for the gas composition are in good agreement with the model predictions. The advantage of such a module reactor is explained based on the mass transfer limitations and consequently the reaction time constants arrived at from the predicted gas compositions.}, issn = {2058-9883}, doi = {10.1039/d1re00076d}, author = {Jogdand, Shunottara M. and Bedadur, Prachiti R. and Torris, Arun and Kharul, Ulhas K. and Naidu, V. Satyam and Devi, R. Nandini} } @article {47696, title = {A universal framework for detecting cis-regulatory diversity in DNA regions}, journal = {Genome Research}, volume = {31}, year = {2021}, month = {SEP}, pages = {1646-1662}, type = {Article}, abstract = {High-throughput sequencing-based assays measure different biochemical activities pertaining to gene regulation, genomewide. These activities include transcription factor (TF)-DNA binding, enhancer activity, open chromatin, and more. A major goal is to understand underlying sequence components, or motifs, that can explain the measured activity. It is usually not one motif but a combination of motifs bound by cooperatively acting proteins that confers activity to such regions. Furthermore, regions can be diverse, governed by different combinations of TFs/ motifs. Current approaches do not take into account this issue of combinatorial diversity. We present a new statistical framework, cisDIVERSITY, which models regions as diverse modules characterized by combinations of motifs while simultaneously learning the motifs themselves. Because cisDIVERSITY does not rely on knowledge of motifs, modules, cell type, or organism, it is general enough to be applied to regions reported by most high-throughput assays. For example, in enhancer predictions resulting from different assays-GRO-cap, STARR-seq, and those measuring chromatin structure-cisDIVERSITY discovers distinct modules and combinations of TF binding sites, some specific to the assay. From protein-DNA binding data, cisDIVERSITY identifies potential cofactors of the profiled TF, whereas from ATAC-seq data, it identifies tissue-specific regulatory modules. Finally, analysis of single-cell ATAC-seq data suggests that regions open in one cell-state encode information about future states, with certain modules staying open and others closing down in the next time point.}, issn = {1088-9051}, doi = {10.1101/gr.274563.120}, author = {Biswas, Anushua and Narlikar, Leelavati} } @article {47463, title = {Uraria picta: a comprehensive review on evidences of utilization and strategies of conservation}, journal = {Journal of Phytology}, volume = {13}, year = {2021}, month = {APR}, pages = {41-48}, type = {Article}, abstract = {

Uraria\ picta\ (Jacq.) DC. (Prishnaparni) is one of the most important medicinal plants used in different traditional systems of medicines including the Ayurveda and Traditional Chinese medicine. The major use of this plant was found in the most popular Ayurvedic formulation {\textquotedblleft}Dashmula{\textquotedblright} and in several many other important Ayurvedic formulations. IUCN placed this woody herb in the least concern category as per version 3.1. It has extensive therapeutic uses and pharmacological activities. Though this plant is a source of many phytochemicals, the uses are uncertain because the raw plant parts or crude extracts are being used in all formulations. Therefore, extensive investigations are necessary to focus on the identification of these phytochemicals. It is an urgent need to give special attention to collecting various aspects and more efforts are required in all areas for utilization and conservation of this valuable medicinal herb. Herein, a compilation of all information with various aspects has been presented, including the authors published work on\ Uraria picta. This review pursues attention towards biological activity, phytochemical profile, utilization, propagation and conservation of\ Uraria picta.

}, doi = {10.25081/jp.2021.v13.7028}, author = {Bhusare, B. P. and Ahire, M. L. and John, C. K. and Nikam, T. D.} } @article {47726, title = {Water mediated allosteric network in beta 2AR T164I variant modulates agonist binding affinity}, journal = {European Biophysics Journal with Biophysics Letters}, volume = {50}, year = {2021}, month = {JUL}, pages = {162}, type = {Meeting Abstract}, issn = {0175-7571}, author = {Nikte, Siddhanta V. and Sonar, Krushna and Tandale, Aditi and Sengupta, Durba and Joshi, Manali} } @article {46622, title = {Amide-linked monocarbonyl curcumin analogues: efficient synthesis, antitubercular activity and molecular docking study}, journal = {Polycyclic Aromatic Compounds}, volume = {45}, year = {2022}, month = {MAY}, pages = {2655-2671}, type = {Article}, abstract = {

An approach toward the synthesis of novel conjugates of 3,5-bis (arylidene)-4-piperidones (DAP) pharmacophore with amide-linkage has been developed via one-pot multicomponent reaction of aryl aldehydes, piperidinone and 2-chloro-N-phenylacetamide using [Et3NH][HSO4] as a catalyst/medium. Both substitutions on arylidene rings and piperidinone nitrogen (substituted 2-chloro-N-phenylacetamide) were varied. The synthesized conjugates were evaluated for their in vitro antitubercular activity against M. tuberculosis H37Ra (MTB) and M. bovis BCG strains. Among the series, compounds 4f, 4g, 4i and 4j showed remarkable broad spectrum antitubercular activity with low IC50 values. Furthermore, computer docking simulations, for the most active conjugates were performed with the active site of mycobacterial enoyl-acyl carrier protein reductase (InhA) support the antitubercular activity. Lower cytotoxicity, high potency and promising activity against MTB and M. Bovis BCG suggest that amide linked DAP could serve as good leads for further modifications and development.

}, keywords = {antimycobacterial activity, Bis (arylidene)-4-piperidones, Cytotoxicity, Ionic liquid, Molecular docking Study}, issn = {1040-6638}, doi = {10.1080/10406638.2020.1852288}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nagargoje, Amol A. and Akolkar, V. Satish and Bhansali, Sujit G. and Sarkar, Dhiman and Shingate, Bapurao B.} } @article {48093, title = {Assembly, annotation, and comparative whole genome sequence of fusarium verticillioides isolated from stored maize grains}, volume = {11}, year = {2022}, month = {JUL}, pages = {810}, type = {Article}, abstract = {

Fusarium verticillioides is a plant pathogenic fungus affecting a wide range of crops worldwide due to its toxigenic properties. F. verticillioides BIONCL4 strain was isolated from stored maize grain samples in India, and produces high amount of fumonisin B1 (FB1). We report a comparative genomic analysis of F. verticillioides, covering the basic genome information, secretome, and proteins involved in host-pathogen interactions and mycotoxin biosynthesis. Whole-genome sequencing (WGS) was performed using the Illumina platform with an assembly size of 42.91 Mb, GC content of 48.24\%, and 98.50\% coverage with the reference genome (GCA000149555). It encodes 15,053 proteins, including 2058 secretory proteins, 676 classical secretory proteins, and 569 virulence and pathogenicity-related proteins. There were also 1447 genes linked to carbohydrate active enzymes (CaZymes) and 167 genes related to mycotoxin production. Furthermore, F. verticillioides genome comparison revealed information about the species{\textquoteright} evolutionary history. The overall study helps in disease prevention and management of mycotoxins to ensure food safety.

}, keywords = {comparative genomics, Fusarium verticillioides, mycotoxin biosynthesis, plant-pathogen interaction, Secretome, whole-genome sequencing}, doi = {10.3390/pathogens11070810}, author = {Navale, Vishwambar D. and Sawant, Amol M. and Gowda, Varun U. and Vamkudoth, Koteswara Rao} } @article {48192, title = {Case report: a fatal case of babesiosis in a splenectomized male patient from Western India}, journal = {American Journal of Tropical Medicine and Hygiene}, volume = {106}, year = {2022}, month = {MAY}, pages = {1421-1425}, type = {Article}, abstract = {

Human babesiosis is a rare disease, caused by Babesia species and commonly transmitted by tick bite. Although human babesiosis is known to be asymptomatic in immunocompetent hosts, clinical cases of severe babesiosis have been reported from splenectomized or immunocompromised individuals. To our knowledge, only one case of human babesiosis in India has been previously reported. Here, we report a case of severe babesiosis with high parasitemia (similar to 70\%) in a 30-year-old asplenic farmer. The patient presented with fever, yellowish discoloration of skin, oliguria, and anemia; he eventually developed multiorgan failure syndrome and died. Peripheral blood films were prepared and used to confirm the presence of piroplasms by microscopy. Total DNA isolated from blood was used for 18S ribosomal RNA gene fragment amplification by polymerase chain reaction, which was subjected to Sanger sequencing. Although 18S sequence indicated that the Babesia species infecting the patient was similar to that of other Babesia species originating from wild mammals, species identification could not be done. Phylogenetic analysis revealed that the patientderived pathogen is distinct because it forms a separate clade in the cladogram.

}, issn = {0002-9637}, doi = {10.4269/ajtmh.20-1118}, author = {Godbole, Ravi and Gaur, Avantika and Nayar, Priyanka and Kiruthiga, Kala and D{\textquoteright}Costa, Pradeep and Manchanda, Rumma and Khilari, Ajinkya and Shanmugam, Dhanasekaran and Muglikar, Kalpana D. and Kundu, Krishnendu} } @article {47895, title = {Catalytic activity of CuFe2O4 spinel oxide for liquid-phase oxidation of cinnamyl alcohol}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {FEB}, pages = {e202104441}, type = {Article}, abstract = {

CuFe2O4 spinel oxide catalyst was synthesized by sol-gel and co-precipitation methods for liquid phase oxidation of Cinnamyl alcohol (CnOH) to Cinnamaldehydes (CnHO) using tert-Butyl hydroperoxide (TBHP) as oxidising agent. Spinel oxide catalyst was characterized by different techniques such as X-ray diffraction (XRD), N-2 adsorption-desorption, BET surface area, and X-ray photoelectron spectroscopy (XPS) to understand the structural, physical properties and oxidation state of the catalyst. The result shows that catalyst prepared by sol-gel method was found higher surface area and smaller crystalline size than co-precipitation method. XPS data confirm the formation of Cu2+ in the spinel which helps to improve the catalytic activity of oxidation. This reaction follows radical mechanism, and exhibited 76.7 \% of CnOH conversion and 68.4 \% of CnHO, and 24.8 \% benzaldehyde (benzald) selectivity using TBHP at 60 degrees C. Kinetic data reveal that 41.2 kJ/mol of activation energy for the reaction. The higher activity of spinel oxide catalyst could be due synergetic effect of spinel (88 \%) and oxides (12 \%) formed in the catalyst, which helps to provide the oxygen during reaction. The contribution of Cu2+ is higher in sol-gel than co-precipitation, which may provide the better reactivity of catalyst. This work helps to select the effective and cost-effective catalyst for the oxidation of CnOH.

}, keywords = {Catalysts, Cinnamaldehyde, Cinnamyl Alcohol, Cupper, iron, oxide, spinel}, issn = {2365-6549}, doi = {10.1002/slct.202104441}, author = {Dange, Rutvija M. and Niphadkar, Prashant S. and Bokade, Vijay V. and Nandanwar, Sachin U.} } @article {48421, title = {Comparison of hydrodynamic characteristics of Tulsion and Siran immobilised beads in a fluidised bed bioreactor}, journal = {Biocatalysis and Agricultural Biotechnology}, volume = {43}, year = {2022}, month = {AUG}, pages = {102428}, type = {Article}, abstract = {

The fluidised bed reactors are successfully utilised in various bioprocesses to produce\ high value products\ using\ immobilised cells\ and enzymes. The present work aims at evaluating hydrodynamic characteristics of a three phase fluidised bed\ bioreactor\ using Tulsion{\textregistered} A-1X MP, Tulsion{\textregistered} ADS-400 and Tulsion{\textregistered} ADS-800,\ polystyrene\ and polyacrylic based three types of free and\ immobilised cells\ solid carriers viz. and comparing their performance with Siran{\textregistered} SIKUG41 glass beads. The hydrodynamic parameters such as particle density (cells and beads), drag coefficient, minimum and maximum\ fluidisation\ velocity, particle settling velocity were estimated and compared in water and biological media (E2 and MSM) having varying rheological properties. The relationships between drag coefficient (CD){\textendash}Reynolds numbers (NRe), superficial liquid velocity (Uf){\textendash}void fraction(ε), expansion index(n){\textendash}NRe\ were obtained.

}, doi = {10.1016/j.bcab.2022.102428}, author = {Kashid, Shweta and Joshi, Kalpana and Nene, Sanjay} } @article {48067, title = {Coordination flexibility aided CO2-specific gating in an iron isonicotinate MOF}, journal = {Chemistry-an Asian Journal}, volume = {17}, year = {2022}, month = {FEB}, pages = {e202101305}, type = {Article}, abstract = {

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal-organic framework (MOF), (Fe(4-PyC)(2) . (OH). The framework showed CO2-specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF {\textquoteleft} s physisorptive porosity towards CO2, CH4, and N-2 was investigated; it adsorbed only CO2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO2 pressure opening the gate for a sharp increase in CO2 uptake at 333 mmHg (At 298 K, the CO2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF {\textquoteleft} s potential for CO2/N-2 and CO2/CH4 gas separation aided by this gating. IAST model reveals that the CO2/N-2 selectivity jumps from 325 to 3131 when the gate opens, while the CO2/CH4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M2+-isonicotinate MOFs (M=Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

}, keywords = {CO2 capture, flexible MOF, gating, Isonicotinic}, issn = {1861-4728}, doi = {10.1002/asia.202101305}, author = {Singh, Himan Dev and Nandi, Shyamapada and Chakraborty, Debanjan and Singh, Kirandeep and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article {48388, title = {[DBUH][OAc]-catalyzed domino synthesis of novel benzimidazole incorporated 3,5-Bis (Arylidene)-4-piperidones as potential antitubercular agents}, journal = {Polycyclic Aromatic Compounds}, volume = {42}, year = {2022}, month = {NOV}, pages = {7010-7024}, type = {Article}, abstract = {

A series of new benzimidazole incorporated 3,5-bis (arylidene)-4-piperidones were synthesized by using aryl aldehydes, piperidinone, 2-(chloromethyl)-benzimidazole and DBU acetate [DBUH][OAc] act as a catalyst under solvent free condition in excellent yields. The synthesized compounds were screened for their in vitro antimycobacterial activity against M. tuberculosis H37Ra (MTB) and M. bovis BCG strains. The compounds 4a, 4b, 4e, 4i, 4k and 4l are highly potent against both the strains. Most of the active compounds are non-cytotoxic against MCF-7, A549, HCT 116 and THP-1 cell lines. Furthermore, a molecular docking study of these compounds was carried out to investigate their binding pattern with the target, active site of mycobacterial enoyl-acyl carrier protein reductase (Inh A). Therefore, these compounds can be subjected for further optimization and drug development which could give promising chemical leads for treatment of TB.

}, keywords = {Antitubercular activity, curcumin, Cytotoxicity, Ionic liquid, multicomponent reactions}, issn = {1040-6638}, doi = {10.1080/10406638.2021.1995008}, author = {Subhedar, Dnyaneshwar D. and Shaikh, Mubarak H. and Nagargoje, Amol A. and Sarkar, Dhiman and Khedkar, Vijay M. and Shingate, Bapurao B.} } @article {48069, title = {Direct (hetero)arylation (DHAP) polymerization of conjugated polymers - new A-B-A monomer design for P(NDI2OD-T2) \& the challenges of adopting DHAP for continuous flow processes}, journal = {Journal of Materials Chemistry C}, volume = {10}, year = {2022}, month = {SEP}, pages = {13025-13039}, type = {Article}, abstract = {

P(NDI2OD-T2), also known as Polyera ActivInk N2200, was synthesized by the atom-economic direct hetero arylation polymerization (DHAP) route using a newly designed A-B-A monomer. The new monomer design involved flanking naphthalene diimide with bithiophene units in the bay position, which was further polymerized with bay substituted 1,4-dibromo naphthalene diimide, to afford the same polymer structure as P(NDI2OD-T2). The new monomer design resulted in a very high molecular weight (M-n: 99.5 kDa, D-M: 2.8) defect-free polymer in a quantitative yield by the DHAP batch process using 1,2,4-trichlorobenzene (TCB) as the solvent. DFT studies revealed that the abstraction of the alpha-proton from the naphthalene diimide substituted 2,2 {\textquoteleft}-bithiophene was favorable by 2.6 kcal mol(-1) (Delta Delta G) as compared to that from 2,2 {\textquoteleft}-bithiophene. The reason for this improved C-H activation at the alpha position can be attributed to the presence of C-HMIDLINE HORIZONTAL ELLIPSIS pi stabilizing interactions in naphthalene diimide substituted 2,2 {\textquoteleft}-bithiophene, which strengthens upon the extended charge delocalization throughout the ring, thus stabilizing the conjugate base generated after the proton abstraction. Continuous flow polymerization was carried out by pumping the DHAP reaction mixture including the monomers, catalyst, and additive (pivalic acid) solubilized in degassed TCB through a pre-heated glass condenser packed with K2CO3 and Celite under aerobic conditions. Reproducible molecular weights of M-n: 29.5 kDa, D-M: 1.7 were obtained at much lower concentrations of reactant mixture compared to that for batch polymerization. This is the first report of the synthesis of P(NDI2OD-T2) by a Continuous Flow Process adopting the DHAP route to obtain a defect-free polymer with reasonable molecular weights. P(NDI2OD-T2) was also synthesized by Stille polymerization as a reference control sample to compare the thermal and charge carrier transport properties of the DHAP polymers. Organic field-effect (OFET) mobility measurements indicated mobility values in the order of 10(-3) cm(2) V-1 s(-1) for the DHAP batch polymer (using the novel monomer design). The P(NDI2OD-T2) synthesized by DHAP batch using the commonly used starting materials - bisbromo naphthalene diimide and bithiophene, exhibited OFET mobilities which were one order less, similar to 10(-4) cm(2) V-1 s(-1). This observation highlights the importance of structural design in the monomer to enhance reactivity and thereby the bulk properties using the DHAP route.

}, issn = {2050-7526}, doi = {10.1039/d2tc02514k}, author = {Kakde, Navnath R. and Bharathkumar, H. J. and Wavhal, Bhaiyyasaheb A. and Nikam, Arun and Patil, Suneha and Dash, Soumya Ranjan and Vanka, Kumar and Krishnamoorthy, K. and Kulkarni, Amol and Asha, S. K.} } @article {48096, title = {Direct oxidation of bromo-derived Fischer-Borsche oxo-ring using molecular iodine with combined experimental and computational study}, journal = {Organic \& Biomolecular Chemistry}, volume = {20}, year = {2022}, month = {JUL}, pages = {5726-5729}, type = {Article}, abstract = {

A direct oxidation of the bromo-derived Fischer-Borsche oxo-ring leading to carbazolequinone has been developed by using molecular iodine. This unprecedented transformation has been used for the modular synthesis of the anti-cardiotonic agent murrayaquinone. Furthermore, the present method has been generalized to a broad range of functional groups, with good to excellent yield.

}, issn = {1477-0520}, doi = {10.1039/d2ob00793b}, author = {Humne, Vivek T. and Ghom, Monica H. and Naykode, Mahavir S. and Dangat, Yuvraj and Vanka, Kumar and Lokhande, Pradeep} } @article {48194, title = {Diversity assessment of Gloriosa superba accessions from Western Ghats of India based on morphological traits, ISSR markers and metabolite content}, journal = {Journal of Applied Research on Medicinal and Aromatic Plants}, volume = {30}, year = {2022}, month = {SEP}, pages = {100388}, type = {Article}, abstract = {

Gloriosa superba L. (glory lily) is a medicinally and horticulturally important plant used as a commercial source of the alkaloid colchicine. The Western Ghats in India is mostly unexplored for the morphological, genetic, and metabolite diversity of the species. In the current study, three methodologies were employed to assess the diversity among 50 established accessions of G. superba collected from several locations in the Western Ghats. The morphological analysis revealed that, among the studied traits, seed yield per vine and dry seed weight per 100 seeds for the established accessions were the most diverse traits. The former exhibited a significantly positive correlation with four vegetative and five yield traits. The first three principal components showed nine traits contributing to the variation. Intra-specific molecular variation based on inter simple sequence repeat markers distributed the accessions in three clusters with high polymorphism and low genetic diversity indices. Liquid chromatography high-resolution mass spectrometry analysis revealed significant variation among the screened accessions for colchicine content in tuber and seed tissue. Interestingly, an unexplored tissue, pod shell, was found to contain significantly high colchicine, which could be explored for commercial colchicine extraction. The morphogenetic and metabolite variation revealed by the study would be useful to develop elite varieties to expand the cultivation of glory lily across the country, fulfilling the increasing demand for colchicine and providing remunerative income to the farmers.

}, keywords = {Colchicine, Genetic diversity, Gloriosa superba, Metabolite diversity, Morphological diversity, Western Ghats}, doi = {10.1016/j.jarmap.2022.100388}, author = {Mahajan, Yogesh A. and Shinde, Balkrishna A. and Mulani, Fayaj A. and Gade, Akshay B. and Kasodekar, Amol K. and Thulasiram, H. V. and Kadoo, Narendra Y. and Nikam, Tukaram D.} } @article {48180, title = {DNA binding, antitubercular, antibacterial and anticancer studies of newly designed piano-stool ruthenium(ii) complexes}, journal = {Dalton Transactions}, volume = {51}, year = {2022}, month = {NOV }, pages = {16371-16382}, type = {Article}, abstract = {

The chemotherapeutic potential of ruthenium(ii) complexes has recently attracted researchers{\textquoteright} interest as antibacterial and anticancer agents. In this study, two novel half-sandwich imine-based Ru complexes ([Ru(p-cymene)Cl(L-1)][PF6] (Ru-1) and [Ru(p-cymene)Cl(L-2)][PF6] (Ru-2)) were reported for their deoxyribonucleic acid (DNA) binding and antitubercular, antibacterial, and anticancer activities. The molecular structure of Ru-2 was obtained by single-crystal X-ray crystallography. DNA interaction studies were conducted by UV-Vis absorbance and fluorescence spectral titration which gave rise to DNA binding constants (K-b) of 1.32 x 10(6) and 1.82 x 10(6) for Ru-1 and Ru-2, respectively and the Stern-Volmer binding constant (K-SV) values for Ru-1 and Ru-2 were 1.7763 x 10(4) M-1 and 7.6 x 10(3) M-1, respectively. The in vitro antitubercular activity was evaluated against Mycobacterium tuberculosis H37Ra. The antibacterial potential of both the Ru-complexes was examined against Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria. The half-maximal inhibitory concentration (IC50) values for the antitubercular activity of Ru-1 and Ru-2 were 4.87 +/- 1.32 mu M and 5.78 +/- 0.54 mu M, respectively. A cytotoxic study of these complexes was performed against the human breast cancer cell line (MCF-7) and the human embryonic kidney cell line (HEK293) (normal cells). The study revealed meaningful activity of the Ru-1 complex against (cancer) MCF-7 cells, while the viability of HEK293 (normal) cells in the presence of Ru-2 was higher as compared to a reference drug 5FU. We suggest that these kinds of Ru-complexes could have potential for application in metallopharmaceuticals.

}, issn = {1477-9226}, doi = {10.1039/d2dt02577a}, author = {Navale, Govinda and Singh, Sain and Agrawal, Sonia and Ghosh, Chandrachur and Choudhury, Angshuman Roy and Roy, Partha and Sarkar, Dhiman and Ghosh, Kaushik} } @article {47761, title = {Donor-acceptor based solvent-free organic liquid hybrids with exciplex emission and room temperature phosphorescence}, journal = {Chemical Communications}, volume = {58}, year = {2022}, month = {FEB }, pages = {1998-2001}, type = {Article}, abstract = {Solvent-free organic liquids are well-known for their excellent luminescence features. Hence, the recent developments in this area have marked them as potential emitters with high quantum yield and enhanced processability. The support of an available liquid matrix enables doping to deliver hybrid liquids with intriguing luminescence features. In this direction, we report solvent-free liquid donor-acceptor pairs with exciplex emission and room temperature phosphorescence at very low acceptor loading. The underlying weak intermolecular interactions have been revealed by 2D NMR techniques and theoretical calculations. The formation of large-area thin films by exciplex and phosphorescent liquid hybrids will encourage the development of scalable lighting and display materials.}, issn = {1359-7345}, doi = {10.1039/d1cc07082g}, author = {Wakchaure, Vivek Chandrakant and Veer, Sairam D. and Nidhankar, Aakash D. and Goudappagouda and Nayak, Rashmi and Asokan, Kiran and Ravindranathan, Sapna and Babu, Sukumaran Santhosh} } @article {48231, title = {Effect of oxalic acid and sulphuric acid hydrolysis on the preparation and properties of pineapple pomace derived cellulose nanofibers and nanopapers}, journal = {International Journal of Biological Macromolecules}, volume = {209}, year = {2022}, month = {JUN }, pages = {1745-1759}, type = {Article}, abstract = {

Nanocellulose is the {\textquoteleft}{\textquoteleft}green magnet{\textquoteright}{\textquoteright} which attracts a wide spectrum of industries towards it due to its availability, biodegradability, and possible smart applications. For the first time, pineapple pomace was being explored as an economic precursor for cellulose nanofibers. Nanofiber isolation was accomplished using a chemo-mechanical method and solution casting was adopted for the development of nanopapers. Moreover, the study examines the structural, optical, crystalline, dimensional, and thermal features of nanofibers isolated using different acid hydrolysis (oxalic acid and sulphuric acid) methods. Fourier-transform infra-red spectroscopy, 13C solid-state nuclear magnetic resonance spectroscopy, and X-ray diffraction analysis indicated the presence of type I cellulose. The transmittance, crystallinity index, and thermal stability of PPNFS (sulphuric acid treated fiber) were greater than PPNFO (oxalic acid treated fiber). The transmission electron microscopy and dynamic light scattering analysis confirmed the nanodimension of PPNFO and PPNFS. While comparing the optical and mechanical properties of nanopapers, PPNFS outperforms PPNFO. The tensile strength of the prepared nanopapers (64 MPa (PPNFO) and 68 MPa (PPNFS)) was found to be high compared to similar works reported in the literature. The prepared nanopaper is proposed to be used for food packaging applications.

}, keywords = {cellulose nanofibers, Cellulosic nanopapers, Pineapple pomace}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2022.04.138}, author = {Neenu, K. V. and Dominic, C. D. Midhun and Begum, P. M. Sabura and Parameswaranpillai, Jyotishkumar and Kanoth, Bipinbal Parambath and David, Deepthi Anna and Sajadi, S. Mohammad and Dhanyasree, P. and Ajithkumar, T. G. and Badawi, Michael} } @article {47719, title = {The effects of cis and trans butenedioic acid on the physicochemical behavior of lumefantrine}, journal = {Crystengcomm}, volume = {24}, year = {2022}, month = {JAN }, pages = {156-168}, type = {Article}, abstract = {The present work investigates the effects of cis and trans butenedioic acid isomers (maleic acid and fumaric acid) on the crystallinity and pharmaceutical behavior of lumefantrine. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), attenuated total reflectance infrared spectroscopy (ATR-IR), solid-state nuclear magnetic resonance spectroscopy (ss-NMR), and single-crystal X-ray diffraction (SC-XRD) studies were employed. Lumefantrine-fumaric acid crystallized as a salt in the monoclinic space group P2(1)/c. In comparison, DSC and PXRD showed the formation of a co-amorphous solid with maleic acid. Complete proton transfer with a strong ionic interaction led to crystalline salt formation with the trans isomer, whereas weaker/fewer hydrogen bonds with the cis isomer of butenedioic acid led to a co-amorphous salt. The in vitro dissolution of both salts resulted in a similar 2.6-2.7-fold improvement in dissolution rate when compared to that of the crystalline lumefantrine. The crystalline and co-amorphous salts were stable under accelerated stability conditions (40 +/- 2 degrees C and 75 +/- 5\% RH) for one month.}, doi = {10.1039/d0ce01709d}, author = {Tomar, Devendrasingh and Lodagekar, Anurag and Gunnam, Anilkumar and Allu, Suryanarayana and Chavan, Rahul B. and Tharkar, Minakshi and Ajithkumar, T. G. and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {48137, title = {Enantioselective Cu(I)-catalyzed borylative cyclization of enone-tethered cyclohexadienones and mechanistic insights}, journal = {Nature Communications}, volume = {13}, year = {2022}, month = {FEB }, pages = {854}, type = {Article}, abstract = {

Rapidly building molecular structures with both elements of complexity and flexibility is a key goal of organic synthesis. Here the authors show a tandem copper-catalyzed beta-borylation/Michael addition on prochiral enone-tethered 2,5-cyclohexadienones, to generate bicyclic borylated products in high yield and enantioselectivity. The catalytic asymmetric borylation of conjugated carbonyls followed by stereoselective intramolecular cascade cyclizations with in situ generated chiral enolates are extremely rare. Herein, we report the enantioselective Cu(I)-catalyzed beta-borylation/Michael addition on prochiral enone-tethered 2,5-cyclohexadienones. This asymmetric desymmetrization strategy has a broad range of substrate scope to generate densely functionalized bicyclic enones bearing four contiguous stereocenters with excellent yield, enantioselectivity, and diastereoselectivity. One-pot borylation/cyclization/oxidation via the sequential addition of sodium perborate reagent affords the corresponding alcohols without affecting yield and enantioselectivity. The synthetic potential of this reaction is explored through gram-scale reactions and further chemoselective transformations on products. DFT calculations explain the requirement of the base in an equimolar ratio in the reaction, as it leads to the formation of a lithium-enolate complex to undergo C-C bond formation via a chair-like transition state, with a barrier that is 22.5 kcal/mol more favourable than that of the copper-enolate complex.

}, issn = {0039-7881}, doi = {10.1038/s41467-022-28288-7}, author = {Jadhav, Sandip B. and Dash, Soumya Ranjan and Maurya, Sundaram and Nanubolu, Jagadeesh Babu and Vanka, Kumar and Chegondi, Rambabu} } @article {48423, title = {Enantioselective separation of amino acids using chiral polystyrene microspheres synthesized by a post-polymer modification approach}, journal = {ACS Polymers Au}, volume = {2}, year = {2022}, month = {MAR}, pages = {257{\textendash}265}, type = {Article}, abstract = {

The enantioselective separation of a racemic mixture of amino acids was achieved by chiral amino acid-modified polystyrene (PS) that was developed by a post-polymer modification approach. Styrene was polymerized using the reversible addition{\textendash}fragmentation chain-transfer (RAFT) polymerization technique and further post-polymer modification was applied by Friedel{\textendash}Crafts acylation reaction with chiral\ N-phthaloyl-l-leucine acid chloride to obtain the protected PS-l-Leu. The chiral PS (protected PS-l-Leu) was assembled into microspheres using a surfactant and was used for carrying out the enantioselective separation of amino acid racemic mixtures by enantioselective adsorption followed by a simple filtration process. Compared to as-precipitated chiral PS (protected PS-l-Leu) powder, the protected PS-l-Leu microspheres exhibited a better enantioselective separation efficiency (ee \%). Furthermore, the protected PS-l-Leu was deprotected to obtain the amine-functionalized deprotected PS-l-Leu chiral PS, which was also assembled into microspheres and used for carrying out enantioselective separation. Deprotected PS-l-Leu-functionalized chiral PS microspheres could achieve up to 81.6 ee \% for the enantioselective separation of a racemic mixture of leucine. This is one of the first reports of the synthesis of amino acid-modified chiral PS microspheres and their application to the simple filtration-based enantioselective separation of native amino acids from their racemic mixtures.

}, doi = {10.1021/acspolymersau.2c00004}, author = {Nikam, Shrikant B. and Asha S. K} } @article {47983, title = {Enhanced anisole hydroxylation over a hierarchical micro/mesoporous TS-1 catalyst}, journal = {New Journal of Chemistry}, volume = {46}, year = {2022}, month = {AUG}, pages = {14667-14675}, type = {Article}, abstract = {

Hierarchical TS-1 materials were synthesized using hydrothermal synthesis and a post modification technique through desilication. They were evaluated for hydroxylation of anisole to produce industrially important chemicals, o-methoxyphenol (OMP) and p-methoxyphenol (PMP). The detailed characterization of the prepared catalysts, such as morphology, structure, nature of Ti and surface area were obtained by SEM, HR-TEM, XRD, UV-VIS spectroscopy and the BET technique. The effects of various operational parameters such as substrate/H2O2 molar ratio, reaction temperature, catalyst concentration and solvent effect on the hydroxylation of anisole have been studied in detail. The microporous TS-1 catalyst showed 32\% anisole conversion with 34\% selectivity to PMP, while the micro/mesoporous DTS-1 catalyst showed enhanced activity for anisole hydroxylation, i.e. 54\% conversion with 55\% selectivity towards PMP. The increased framework Ti and improved accessibility of the active sites located in the channels of DTS-1, which permit the mass transfer of reactants, transition states and products from the mesopores of DTS-1, were responsible for the enhanced catalytic activity and selectivity towards p-methoxyphenol.

}, issn = {1144-0546}, doi = {10.1039/d2nj01556k}, author = {Patil, Chetana R. and Niphadkar, Prashant and Kamble, Sanjay P. and Rode, V. Chandrashekhar} } @article {48177, title = {Exploring the core microbiota in scented rice (Oryza sativa L.) rhizosphere through metagenomics approach}, journal = {Microbiological Research}, volume = {263}, year = {2022}, month = {OCT}, pages = {127157}, type = {Article}, abstract = {

Rice is a major food crop cultivated around the globe. Specially scented rice varieties are of commercial importance but they are low-yielding. The rhizospheric microflora plays a significant role in improving yield and aroma. However, the core microbiome of the scented rice rhizosphere is comparatively less explored. Here, we analyzed the core microbiome associated with the rhizosphere of the scented (Ambemohar-157 and Dehradun basmati) in comparison with non-scented rice (Kolam and Arize 6444 Gold) cultivated at two different geoclimatic zones of India (Maharashtra and Uttarakhand) using the metagenomics approach. The alpha and beta diversity analysis showed that the microbial communities associated with scented and non-scented varieties significantly changes with respect to richness, diversity, and evenness. The taxonomic profiling revealed the variation in composition, diversity, and abundance of the microbiome in terms of phyla and genera associated with scented rice varieties over non-scented. The cluster analysis distinguishes the microbial communities based on their geographical positions. The core microbiome analysis revealed that scented rice rhizosphere shelters distinct and unique microbiota. 28.6 \% of genera were exclusively present only in the scented rice rhizosphere. The putative functional gene annotation revealed the high abundance of genes related to the biosynthesis of 2-acetyl-1-pyrroline (2AP) precursors in scented rice. The precursor feeding analysis revealed proline as a preferred substrate by 2AP synthesizing bacteria. The 2AP precursor proline and proline metabolism genes showed a positive correlation. The scented rice-specific rhizobacteria pointed out in this study can be used as bioinoculants for enhancing aroma, yield, and sustainable rice cultivation.

}, keywords = {Metagenome, Microbial community, Microbiome, Oryza sativa, Rhizosphere, rice}, issn = {0944-5013}, doi = {10.1016/j.micres.2022.127157}, author = {Dhondge, V. Harshal and Barvkar, Vitthal T. and Paul, Dhiraj and Dastager, Syed G. and Pable, Anupama A. and Nadaf, Altafhusain B.} } @article {48077, title = {Facile, sustainable and unassisted plain water oxidation on Au/Ce0.9Ti0.1O2 nanorods in direct sunlight}, journal = {Journal of Chemical Sciences}, volume = {134}, year = {2022}, month = {JUN}, pages = {61}, type = {Article}, abstract = {

Impressive rate of solar water oxidation to molecular oxygen (O-2) has been demonstrated on nanorods (NRs) of Ce0.9Ti0.1O2 (CT-NR) and Au-deposited CT-NR (Au-CT-NR) photocatalysts with a sacrificial agent (Fe3+) and in plain water in one sun condition, direct sunlight and with lambda \>= 455 nm. Probably the highest 0 2 yield of 11 mmol/h.g was observed with Au-CT-NR thin film in plain water in direct sunlight, with no sacrificial agent or applied potential. Photoelectrochemical measurements demonstrate a marked reduction in oxidation onset potential of Au-CT-NR by 150 mV with stable photocurrent (0.75 mA/cm(2)), compared to CT-NR (0.23 mA/cm(2)), indicating the operative of plasmon-induced resonant energy transfer (PIRET) process. Effective electron quenching by nanogold and hence low recombination in the depletion region is a critical step for the observation of a high rate of oxygen evolution. In addition to this, a predominant change in the nature of the valence band from O-2p dominated on CeO2 to Ce-4f dominated with CT-NR (due to Ti4+ introduction in CeO2), the efficient light absorption of photocatalysts in thin-film form, functional and effective PIRET process, and facile E-F alignment, enhances the oxygen evolution with Au-CT-NR in direct sunlight and make it highly sustainable. A possible mechanism of water oxidation is proposed from the observed experimental findings.

}, keywords = {ceria, Electronic integration, Photocatalysis, thin film, water splitting}, issn = {0974-3626}, doi = {10.1007/s12039-022-02055-z}, author = {Dubey, Anjani and Mishra, Abhaya Kumar and Negi, Sanjay Singh and Gopinath, Chinnakonda S.} } @article {48185, title = {Fluorobenzoic acid coformers to improve the solubility and permeability of the BCS class IV drug naftopidil}, journal = {Chemical Communications}, volume = {58}, year = {2022}, month = {MAY }, pages = {5582-5585}, type = {Article}, abstract = {

Crystalline salts of the low solubility and low permeability drug naftopidil were investigated with mono-, di-, tri-, and tetrafluorobenzoic acids as coformers to show that 245TFBA (2,4,5-trifluorobenzoic acid) is the optimal salt with faster dissolution and high permeability, thereby opening the study of fluorinated coformers in pharmaceutical cocrystals and salts.

}, issn = {1359-7345}, doi = {10.1039/d1cc07187d}, author = {Mannava, M. K. Chaitanya and Bommaka, Manish K. and Dandela, Rambabu and Solomon, K. Anand and Nangia, Ashwini K.} } @article {48366, title = {Formation of the secondary phase domain by multi-cation substitution for the superior electrochemical performance of spinel cathodes for high-voltage li-ion batteries}, journal = {ACS Applied Energy Materials}, volume = {5}, year = {2022}, month = {DEC}, pages = {15345-15355}, type = {Article}, abstract = {

{Disorder-structured spinel oxides are opening frontiers for high-capacity/high-voltage cathodes to meet the challenges of independ-ence on cobalt-containing cathodes toward cheap and sustainable energy storage sources in Li-ion batteries (LIBs). In the present work, a series of Co-free materials: LiMn2-x-y-zNixFeyAlzO4 (x = 0.8-0.5

}, keywords = {5Ni0, cation-doped spinel cathode material, cobalt-free cathode, disorder structured spinel cathode material, high-voltage cathode, li-ion batteries, LiMn1}, issn = {2574-0962}, doi = {10.1021/acsaem.2c02667}, author = {Nayaka, Girish Praveen and Shivamurthy, Bogalera Papaiah and Thripuranthaka, Marulasiddappa and Shelke, V. Manjusha.} } @article {47988, title = {Green synthesis of highly dispersed Cu metal nanoparticles catalysts}, journal = {Inorganic Chemistry Communications}, volume = {146}, year = {2022}, month = {DEC}, pages = {110118}, type = {Article}, abstract = {

Bionanotechnology approach for metal nanoparticles (NPs) synthesis is cost-effective and environmentally friendly. Organic molecules present in plant extracts can be efficiently utilized for bio-reduction of metal ions into metal NPs in a one-step green synthesis methodology. The biosynthesis procedure for metal NPs synthesis is quick, easy to scale up and can be perform at ambient conditions. The present investigations propose the biosynthesis of highly dispersed and stable copper NPs (Cu NPs) supported on NaY zeolite using plant extract of Tinospora cordifolia and Andrographis paniculata for the first time. The structural and morphological attributes of Cu NPs were explored by adopting various physico-chemical techniques, for example Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES), X-ray diffraction (XRD), Temperature Programmed Desorption (CO2-TPD and NH3-TPD), Temperature Programmed Reduction (H2-TPR), N2 sorption, Electron Microscopy (SEM, TEM and HR-TEM), X-ray Photoelectron Spectroscopy (XPS), etc. The experimental study (XRD, SEM, TEM, and HR-TEM) recommend that the green synthesis method by using plant extract has promising effect for the synthesis of nano-sized, stable and homogeneously dispersed Cu NPs catalysts (Cu NPs average size of 1.6 and 1.8 nm) as compared to chemical synthesis approach. The present result is better than those of many state-ofthe art techniques reported for green synthesis of Cu NPs using plant extract. According to the current study, it is advantageous to prepare highly dispersed metal NPs with desired size, shape, morphology and the required properties by using plant extract.

}, keywords = {Biosynthesis of nanomaterials, Cu nanoparticles, Heterogeneous catalysts, Support -Metal interaction, Zeolite supported catalysts}, issn = {1387-7003}, doi = {10.1016/j.inoche.2022.110118}, author = {Nagpure, Atul S. and Mohture, Vikas M. and Kayarkar, Ankush} } @article {48089, title = {Heterostructure from heteromixture: unusual OER activity of FeP and CoP nanostructures on physical mixing}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {NOV}, pages = {22354-22362}, type = {Article}, abstract = {

Heterointerfaces generated by inter-domain interactions on a nanoscale play a critical role in altering the activity of an electrocatalyst towards an electrochemical process. Heterointerfaces affect the surface characteristics, electronic structure, and physicochemical properties of a nanomaterial. Herein, we report an FeP-CoP heterostructure prepared by simple physical mixing of FeP and CoP nanostructures showing a remarkable performance towards water oxidation in comparison to their individual monometallic phosphides. FeP mixed with 20 wt\% CoP shows a low overpotential (eta(10)) of 220 mV as compared to FeP (eta(10), 325 mV). Furthermore, a high current density of 1.37 A cm(-2) and mass activity of 18 987 A g(M)(-1) were also achieved at 500 mV overpotential in 1.0 M KOH. The physical mixture shows immense stability for 200 h to achieve a high current density of 200 mA cm(-2). Meanwhile the potentiostatic performance of FeP at 200 mA cm(-2) decreases to an extent of 50\% in 40 h. A full cell arrangement employing this catalyst as the anode material requires 1.56 V to attain a current density of 10 mA cm(-2). Various characterization techniques, control experiments and theoretical studies indicate that the formation of heterointerfaces between the nano-domains of FeP and CoP results in charge transfer between Fe and Co metal sites. In addition, an oxygenated surface at the metal phosphide interface favours the sorption kinetics of intermediates involved in the reaction leading to low energy barriers in the potential determining and other steps, thus showing improved performance towards water oxidation.

}, issn = {2050-7488}, doi = {10.1039/d2ta04296g}, author = {Bhutani, Divya and Maity, Sisir and Chaturvedi, Shashank and Chalapathi, Divya and Waghmare, V. Umesh and Narayana, Chandrabhas and Prabhakaran, Vinod C. and Muthusamy, Eswaramoorthy} } @article {48354, title = {Hierarchical TS-1 for epoxidation of non-edible Karanja (Millettia pinnata) oil methyl ester to methyl epoxioleate (biodiesel additive) in presence of H2O2 as oxidizing agent}, journal = {Environmental Progress \& Sustainable Energy}, volume = {41}, year = {2022}, month = {MAY}, pages = {e13766}, type = {Article}, abstract = {

Application of non-edible Karanja (Millettia pinnata) oil which is abundantly available in India is not explored so far. The present study is an attempt to convert fatty acid methyl ester (FAME) obtained from Karanja oil to methyl epoxioleate over hierarchical titanosilicate (TS-1) catalyst. Methyl epoxioleate, a biodiesel additive can blend up to 20\% with biodiesels to improve oxidative stability and cold flow properties of biodiesel. A series of hierarchical TS-1 were prepared by desilication of parent TS-1 with 0.1 N NaOH at 80 degrees C for 1, 3, 5, and 7 h, respectively. Samples were characterized by powder XRD, low temperature nitrogen adsorption/desorption, and TEM. Eighty percent FAME conversion with 70\% yield of methyl epoxioleate was obtained over 5H-TS-1 catalyst. The enhanced catalytic activity of a 5H-TS-1 compared to parent TS-1 mainly attributed to the high mesoporosity coupled with well-preserved crystallinity. 5H-TS-1 catalyst was found to be completely reusable after calcination at 500 degrees C for 12 h. Hierarchical 5H-TS-1 catalyst for effective conversion of non-edible Karanja oil methyl ester to methyl epoxioleate probably not reported so far.

}, keywords = {H2O2, hierarchical TS-1, Karanja oil methyl ester, methyl epoxioleate, TS-1}, issn = {1944-7442}, doi = {10.1002/ep.13766}, author = {Anil, Reshma and Niphadkar, Prashant and Bokade, Vijay} } @article {48120, title = {Highly efficient and reusable polymer supported palladium catalyst for copper free sonogashira reaction in water}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {APR}, pages = {e202104273}, type = {Article}, abstract = {

Development of a novel, greener and efficient heterogeneous catalytic system for copper free Sonogashira reaction in water is described. This novel catalyst can be easily prepared by a simple method through synthetic modification of nitrile group in Polyacrylonitrile (PAN) using monoethanolamine (MEA) followed by its complexation with palladium chloride (PdCl2). The resulting polymer Pd complex (mPAN-Pd) was characterized by means of Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray Spectroscopy (EDAX), Inductively Coupled Mass Spectrometry (ICP-MS) and X-ray Photo Electron Spectroscopy (XPS) analyses. mPAN-Pd was then explored as highly efficient heterogeneous catalyst for Sonogashira coupling reaction under copper and ligand free conditions in water affording the corresponding coupling products up to 97 \% isolated yield. Moreover, the catalyst was recovered by simple filtration after the reaction and reused for next 5 cycles with excellent stability and activity. This is the first report on the use of ethanolamine modified PAN Pd (II) complex as an efficient heterogeneous catalyst for a coupling reaction.

}, keywords = {catalysis, green chemistry, Palladium, Polymer Support, Sonogashira coupling}, issn = {2365-6549}, doi = {10.1002/slct.202104273}, author = {Sruthi, Pambingal Rajan and Nimmi, Puthan Purayil and Babu, Sukumaran Santhosh and Anas, Saithalavi} } @article {48155, title = {Identifying structural signature of dynamical heterogeneity via the local softness parameter}, journal = {Physical Review E}, volume = {105}, year = {2022}, month = {APR}, pages = {044604}, type = {Article}, abstract = {

In this work we study the relationship between the softness of a mean-field caging potential and dynamics at the local level. We first describe the local softness, which shows a distribution, thus identifying structural heterogeneity. We show that the lifetime of the softness parameter is connected to the lifetime of the well-known cage structure in supercooled liquids. Finally, our theory predicts that the local softness and the local dynamics is causal below the onset temperature where there is a decoupling between the short and long time dynamics, thus allowing a static description of the cage. With the decrease in temperature, the correlation between structure and dynamics increases. The study shows that at lower temperatures, the structural heterogeneity increases, and since the structure becomes a better predictor of the dynamics, it leads to an increase in the dynamical heterogeneity. We also find that the softness of a hard, immobile region evolves with time and becomes soft and eventually mobile due to the rearrangements in the neighborhood, confirming the well-known facilitation effect.

}, issn = {2470-0045}, doi = {10.1103/PhysRevE.105.044604}, author = {Sharma, Mohit and Nandi, Manoj Kumar and Bhattacharyya, Sarika Maitra} } @article {48019, title = {Indoline-based donor-pi-acceptor visible-light responsive organic dyes for dye-sensitized solar cells: co-sensitization with squaraine dye for panchromatic IPCE response}, journal = {ACS Applied Energy Materials}, volume = {5}, year = {2022}, month = {FEB}, pages = {1858-1868}, type = {Article}, abstract = {

A series of metal-free indoline-based donor-pi-acceptor (D-pi-A) visible-light active organic dyes, where an indoline unit wrapped with alkyl or alkyl and glycolic (TEG) groups is used as a donor, a mono- or bi-thiophene unit is used as a pi-spacer, and cyanoacrylic acid acts as an acceptor unit, have been designed and synthesized for dye-sensitized solar cell (DSSC) application. These dyes showed three absorption bands in a dichloromethane solution: the first and second transitions are observed in the UV (337-385 nm) and visible (477-514 nm) regions and correspond to pi-pi* and intramolecular charge transfer (ICT) transition, respectively, whereas the third absorption band obtained in the near-IR (629-758 nm) region has been observed for the first time for a D-pi-A type dye architecture. Furthermore, the ICT transition band for AKT dyes showed negative solvatochromism with increasing polarity of solvents. Photovoltaic characterizations for AKT dyes have been systematically studied with a cobalt electrolyte to evaluate the effect of thiophene incorporation and alkyl group substitution by the TEG group on the DSSC device performance. Here, AKT2 showed the highest DSSC efficiency of 3.16\% with V-OC of 0.680 V and J(SC) of 6.24 mA/cm(2) without chenodeoxycholic acid (CDCA) in the AKT dye series, whereas DSSC efficiencies for AKT dyes were not affected much upon further addition of CDCA. Furthermore, AKT dyes were co-sensitized with a complementary optical responsive indoline-based SQS4 dye and showed enhanced efficiency. The combination of AKT2/SQS4 dyes with a ratio of 1:1 showed a maximum of 5.20\% co-sensitized solar cell efficiency compared to other dye combinations with the cobalt electrolyte.

}, keywords = {Dye-sensitized solar cells, indoline-based donor-pi-acceptor dye, intramolecular charge transfer, metal-free organic dye, panchromatic-light absorption, Solvatochromism}, issn = {2574-0962}, doi = {10.1021/acsaem.1c03343}, author = {Singh, Ambarish Kumar and Nithyanandhan, Jayaraj} } @article {48387, title = {Introduction to the themed collection on digitalization in reaction engineering}, journal = {Reaction Chemistry \& Engineering}, volume = {7}, year = {2022}, month = {MAR}, pages = {792-794}, type = {Editorial Material}, issn = {2058-9883}, doi = {10.1039/d2re90011d}, author = {Galvanin, Federico and Hartman, Ryan L. and Kulkarni, Amol A. and Nieves-Remacha, Maria Jose} } @article {48235, title = {Kupyaphores are zinc homeostatic metallophores required for colonization of Mycobacterium tuberculosis}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {119}, year = {2022}, month = {FEB}, pages = {e2110293119}, type = {Article}, abstract = {

Mycobacterium tuberculosis (Mtb) endures a combination of metal scarcity and toxicity throughout the human infection cycle, contributing to complex clinical manifestations. Pathogens counteract this paradoxical dysmetallostasis by producing specialized metal trafficking systems. Capture of extracellular metal by siderophores is a widely accepted mode of iron acquisition, and Mtb iron-chelating siderophores, mycobactin, have been known since 1965. Currently, it is not known whether Mtb produces zinc scavenging molecules. Here, we characterize low-molecular-weight zinc-binding compounds secreted and imported by Mtb for zinc acquisition. These molecules, termed kupyaphores, are produced by a 10.8 kbp biosynthetic cluster and consists of a dipeptide core of ornithine and phenylalaninol, where amino groups are acylated with isonitrilecontaining fatty acyl chains. Kupyaphores are stringently regulated and support Mtb survival under both nutritional deprivation and intoxication conditions. A kupyaphore-deficient Mtb strain is unable to mobilize sufficient zinc and shows reduced fitness upon infection. We observed early induction of kupyaphores in Mtb-infected mice lungs after infection, and these metabolites disappeared after 2 wk. Furthermore, we identify an Mtb-encoded isonitrile hydratase, which can possibly mediate intracellular zinc release through covalent modification of the isonitrile group of kupyaphores. Mtb clinical strains also produce kupyaphores during early passages. Our study thus uncovers a previously unknown zinc acquisition strategy of Mtb that could modulate host-pathogen interactions and disease outcome.

}, keywords = {metallophore, nutritional immunity, tuberculosis, zinc}, issn = {0027-8424}, doi = {10.1073/pnas.2110293119}, author = {Mehdiratta, Kritee and Singh, Shubham and Sharma, Sachin and Bhosale, Rashmi S. and Choudhury, Rahul and Masal, Dattatraya P. and Manocha, Alzu and Dhamale, Bhushan Dilip and Khan, Naseem and Asokachandran, Vivekanand and Sharma, Pooja and Ikeh, Melanie and Brown, Amanda C. and Parish, Tanya and Ojha, Anil K. and Michael, Joy Sarojini and Faruq, Mohammed and Medigeshi, Guruprasad R. and Mohanty, Debasisa and Reddy, D. Srinivasa and Natarajan, Vivek T. and Kamat, Siddhesh S. and Gokhale, Rajesh S.} } @article {48236, title = {Machine learning-based approach to determine infection status in recipients of BBV152 (Covaxin) whole-virion inactivated SARS-CoV-2 vaccine for serological surveys}, journal = {Computers in Biology and Medicine}, volume = {146}, year = {2022}, month = {JUL}, pages = {105419}, type = {Article}, abstract = {

Data science has been an invaluable part of the COVID-19 pandemic response with multiple applications, ranging from tracking viral evolution to understanding the vaccine effectiveness. Asymptomatic breakthrough infections have been a major problem in assessing vaccine effectiveness in populations globally. Serological discrimination of vaccine response from infection has so far been limited to Spike protein vaccines since whole virion vaccines generate antibodies against all the viral proteins. Here, we show how a statistical and machine learning (ML) based approach can be used to discriminate between SARS-CoV-2 infection and immune response to an inactivated whole virion vaccine (BBV152, Covaxin). For this, we assessed serial data on antibodies against Spike and Nucleocapsid antigens, along with age, sex, number of doses taken, and days since last dose, for 1823 Covaxin recipients. An ensemble ML model, incorporating a consensus clustering approach alongside the support vector machine model, was built on 1063 samples where reliable qualifying data existed, and then applied to the entire dataset. Of 1448 self-reported negative subjects, our ensemble ML model classified 724 to be infected. For method validation, we determined the relative ability of a random subset of samples to neutralize Delta versus wild-type strain using a surrogate neutralization assay. We worked on the premise that antibodies generated by a whole virion vaccine would neutralize wild type more efficiently than delta strain. In 100 of 156 samples, where ML prediction differed from self-reported uninfected status, neutralization against Delta strain was more effective, indicating infection. We found 71.8\% subjects predicted to be infected during the surge, which is concordant with the percentage of sequences classified as Delta (75.6\%-80.2\%) over the same period. Our approach will help in real-world vaccine effectiveness assessments where whole virion vaccines are commonly used.

}, keywords = {BBV152, Covaxin, COVID-19, Ensemble methods, Infection, machine learning, SARS-CoV-2}, issn = {0010-4825}, doi = {10.1016/j.compbiomed.2022.105419}, author = {Singh, Prateek and Ujjainiya, Rajat and Prakash, Satyartha and Naushin, Salwa and Sardana, Viren and Bhatheja, Nitin and Singh, Ajay Pratap and Barman, Joydeb and Kumar, Kartik and Gayali, Saurabh and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Lahiri, Amit and Kar, Susanta and Bhosale, Vivek and Srivastava, Mrigank and Mugale, Madhav Nilakanth and Pandey, C. P. and Khan, Shaziya and Katiyar, Shivani and Raj, Desh and Ishteyaque, Sharmeen and Khanka, Sonu and Rani, Ankita and Promila and Sharma, Jyotsna and Seth, Anuradha and Dutta, Mukul and Saurabh, Nishant and Veerapandian, Murugan and Venkatachalam, Ganesh and Bansal, Deepak and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Veeranna, Ravindra P. and Pal, Anirban and Singh, Ranvijay Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Rahman, Syed Nasar and Selvakumar, Gopika and Venkatesan, Subramanian and Karmakar, Malay Kumar and Sardana, Harish Kumar and Kothari, Anamika and Parihar, Devendra Singh and Thakur, Anupma and Saifi, Anas and Gupta, Naman and Singh, Yogita and Reddu, Ritu and Gautam, Rizul and Mishra, Anuj and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Padwad, Yogendra and Patial, Vikram and Hallan, Vipin and Singh, Damanpreet and Tirpude, Narendra and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sistla, Ramakrishna and Balthu, Narender Kumar and Kumar, Kiran A. and Ranjith, Siva and Kumar, B. Vijay and Jamwal, Piyush Singh and Wali, Anshu and Ahmed, Sajad and Chouhan, Rekha and Gandhi, Sumit G. and Sharma, Nancy and Rai, Garima and Irshad, Faisal and Jamwal, Vijay Lakshmi and Paddar, Masroor Ahmad and Khan, Sameer Ullah and Malik, Fayaz and Ghosh, Debashish and Thakkar, Ghanshyam and Barik, S. K. and Tripathi, Prabhanshu and Satija, Yatendra Kumar and Mohanty, Sneha and Khan, Md Tauseef and Subudhi, Umakanta and Sen, Pradip and Kumar, Rashmi and Bhardwaj, Anshu and Gupta, Pawan and Sharma, Deepak and Tuli, Amit and Chaudhuri, Saumya Ray and Krishnamurthi, Srinivasan and Prakash, L. and Rao, V. Ch and Singh, B. N. and Chaurasiya, Arvindkumar and Chaurasiya, Meera and Bhadange, Mayuri and Likhitkar, Bhagyashree and Mohite, Sharada and Patil, Yogita and Kulkarni, Mahesh and Joshi, Rakesh and Pandya, Vaibhav and Mahajan, Sachin and Patil, Amita and Samson, Rachel and Vare, Tejas and Dharne, Mahesh and Giri, Ashok and Mahajan, Sachin and Paranjape, Shilpa and Sastry, G. Narahari and Kalita, Jatin and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, RaviKumar and Dutta, Prachurjya and Singh, Moirangthem Goutam and Gogoi, Gayatri and Tapadar, Yasmin Begam and Babu, Elapavalooru V. S. S. K. and Sukumaran, Rajeev K. and Nair, Aishwarya R. and Puthiyamadam, Anoop and Valappil, Prajeesh Kooloth and Prasannakumari, Adrash Velayudhan Pillai and Chodankar, Kalpana and Damare, Samir and Agrawal, Ved Varun and Chaudhary, Kumardeep and Agrawal, Anurag and Sengupta, Shantanu and Dash, Debasis} } @article {48202, title = {Mechanistic insight into differential interactions of iron oxide nanoparticles with native, glycated albumin and their effect on erythrocytes parameters}, journal = {International Journal of Biological Macromolecules}, volume = {212}, year = {2022}, month = {JUL }, pages = {232-247}, type = {Article}, abstract = {

Nanoparticles and protein bioconjugates have been studied for multiple biomedical applications. We sought to investigate the interaction and structural modifications of bovine serum albumin (BSA) with iron oxide nanoparticles (IONPs). The IONPs were green synthesized using E. crassipes aqueous leaf extract following characterization using transmission electron microscopy, energy dispersive X-ray analysis and X-ray diffraction. Two different concentrations of native/glycated albumin (0.5 and 1.5 mg/ml) with IONPs were allowed to interact for 1 h at 37 degrees C. Glycation markers, protein modification markers, cellular antioxidant, and hemolysis studies showed structural modifications and conformational changes in albumin due to the presence of IONPs. UV-visible absorbance resulted in hyperchromic and bathochromic effects of IONPs-BSA conjugates. Fluorescence measurements of tyrosine, tryptophan, advanced glycated end products, and ANS binding assay were promising and quenching effects proved IONPs-BSA conjugate formation. In FTIR of BSA-IONPs, transmittance was increased in amide A and B bands while decreased in amide I and II bands. In summary, native PAGE, HPLC, and FTIR analysis displayed a differential behaviour of IONPs with native and glycated BSA. These results provided an understanding of the interaction and structural modifications of glycated and native BSA which may provide fundamental repercussions in future studies.

}, keywords = {Albumin, Glycation, iron oxide nanoparticles}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2022.05.106}, author = {Nisar, Akib and Ajabia, Devangi K. and Agrawal, Sanskruthi B. and Varma, Sanjana and Chaudhari, Bhushan P. and Tupe, Rashmi S.} } @article {47984, title = {Methanol-to-light olefins reaction using Zn-Ag modified SSZ-13 catalyst}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {SEP}, pages = {e202201476}, type = {Article}, abstract = {

The 2 wt.\% of Zn and Ag (Zn1-x-Ag-x; x=0.2, 0.4, 0.6 \%) modified SSZ-13 (SZ-13) zeolite was prepared by wet-impregnation method, and its catalytic activity was demonstrated for methanol-to-olefin (MTO). The Zn-0.6-Ag-0.4/SZ-13 catalyst exhibited high catalytic activity due to change in properties of catalyst. The Zn particles were highly dispersed inside the SZ-13; while Ag particles were dispersed on the surface of SZ-13, confirmed by HRTEM and surface area. The small \% of Ag over SZ-13 promotes ethylene production via aromatization of reaction, and highly dispersed Zn on SZ-13 help to produce stable ethylene and propylene. The Zn-0.6-Ag-0.4/SZ-13 catalyst showed (similar to 10 \%) higher light olefin (87 \%) selectivity than parent SZ-13 as well as mono metal incorporated SZ-13. The higher catalytic activity was attributed due to effect of both metals (Zn and Ag), where Ag promotes partial aromatization on the surface, and Zn increases the Lewis acidity in the zeolite pore. This catalyst can help to improve the selectivity of light olefin using MTO reaction.

}, keywords = {Ethylene, Methanol-to-Olef, Propyl, Silver, SSZ, zinc}, issn = {2365-6549}, doi = {10.1002/slct.202201476}, author = {Dange, Rutvija M. and Gawali, Chirag B. and Niphadkar, Prashant S. and Bokade, Vijay V. and Nandanwar, Sachin U.} } @inbook {47812, title = {Molecular determinants of GPCR pharmacogenetics: deconstructing the population variants in β2-adrenergic receptor}, booktitle = {Advances in Protein Chemistry and Structural Biology}, volume = {128}, year = {2022}, month = {JAN}, pages = {361-396}, type = {Article}, abstract = {

G protein-coupled receptors (GPCRs) are membrane proteins that play a central role in cell signaling and constitute one of the largest classes of drug targets. The molecular mechanisms underlying GPCR function have been characterized by several experimental and computational methods and provide an understanding of their role in physiology and disease. Population variants arising from nsSNPs affect the native function of GPCRs and have been implicated in differential drug response. In this chapter, we provide an overview on GPCR structure and activation, with a special focus on the β2-adrenergic receptor (β2-AR). First, we discuss the current understanding of the structural and dynamic features of the wildtype receptor. Subsequently, the population variants identified in this receptor from clinical and large-scale genomic studies are described. We show how computational approaches such as bioinformatics tools and molecular dynamics simulations can be used to characterize the variant receptors in comparison to the wildtype receptor. In particular, we discuss three examples of clinically important variants and discuss how the structure and function of these variants differ from the wildtype receptor at a molecular level. Overall, the chapter provides an overview of structure and function of GPCR variants and is a step towards the study of inter-individual differences and personalized medicine.

}, isbn = {9780323988957}, doi = {10.1016/bs.apcsb.2021.08.002}, author = {Joshi, Manali and Nikte, Siddhanta and Sengupta, Durba} } @article {47813, title = {Na-montmorillonite to Fe(II)-Mt using ferrous citrate/ascorbate obtained by dissolving iron powder}, journal = {Applied Clay Science}, volume = {217}, year = {2022}, month = {FEB}, pages = {106396}, type = {Article}, abstract = {Bentonite containing montmorillonite (Mt) as the major clay mineral is the potential buffer material of engineered barrier system in the deep geological repository for high-level waste management. The corrosion products of canister/or overpack material (carbon steel) may alter the basic characteristics of bentonite through Fe/clay interaction and formation of FeMt to certain extent. A convenient method is required for quantitative preparation of Fe(II)-Mt because the only few direct methods reported have some limitations. For this, weak ferrous complexes having good solubility to facilitate the cation-exchange with bentonite is essential. Therefore, Fe(II)-citrate, Fe(II)-ascorbate and Fe(II)-citrate/ascorbate were obtained here by dissolving the iron powder (Fe0) in citric acid (CA), ascorbic acid (AA) and their equimolar mixtures from 25~mM to 300~mM at 70~{\textdegree}C under N2 atmosphere. The redox potential was measured to monitor the dissolution of Fe0 in these mild organic acids. Higher dissolution of Fe0 occurred in CA~+~AA mixture. The dissolved iron in the form of ferrous complex was reasonably stable in inert atmosphere, Fe2+/Fetotal~≈~1. The parent clay mineral (bentonite, NaMt) was treated with Fe(II)~-~cit/asc to form Fe(II)~-~Mt. through cation exchange process. The CEC and ferrous to ferric ratio of the Fe(II)-Mt was close to the stoichiometric amount. The XRF, XRD, ac impedance, FT-IR, TGA/DSC, XPS and FE-SEM are used for further characterization. In-situ complexation reaction of interlayer Fe2+ ions in Fe(II)-Mt with o-phenanthroline was also observed.}, keywords = {Ascorbic acid, Bentonite, Citric acid, Cr(VI) reduction, Fe(II)-montmorillonite, Iron dissolution}, issn = {0169-1317}, doi = {10.1016/j.clay.2021.106396}, author = {S. Chikkamath and J. Manjanna and N. Momin and B.G. Hegde and G.P. Nayaka and Aishwarya S. Kar and B.S. Tomar} } @article {48175, title = {Novel crystal forms of Entresto: a supramolecular complex of trisodium sacubitril/valsartan hemi-pentahydrate}, journal = {Crystengcomm}, volume = {24}, year = {2022}, month = {OCT}, pages = {7387-7393}, type = {Article}, abstract = {

Entresto is a salt-cocrystal supramolecular complex with the chemical name trisodium sacubitril/valsartan hemi-pentahydrate for treating chronic heart failure and was approved by the US FDA in 2015. This multidrug complex was synthesized in our laboratory to investigate its polymorphic behavior. Different crystallization conditions, including various solvent systems, yielded different novel solid forms of Entresto (Form-I to Form-VI), including the reported form. All the novel solids are solvent-dependent and were reproducibly crystallized on a 10 g scale quantity. The 1H NMR spectra confirmed the 1 : 1 stoichiometry of the two drugs, namely, sacubitril and valsartan, in all the solid forms of the crystalline products. Powder X-ray diffraction and DSC analysis of the crystalline solids established that they are distinct crystalline forms. Stability studies under ambient conditions carried out over a one-year period showed higher stability for Form-I and Form-III compared to the other forms, including the innovator crystal form (labelled as Form-II). The novel crystal forms (notably Form-I and Form-III) exhibit higher stability and less hygroscopicity than the reported Form-II.

}, doi = {10.1039/d2ce01009g}, author = {Shaikh, Tabrez R. and George, Christy P. and Bhukya, Priyanka and Shelke, Nikita and Pawar, Komal and Garai, Abhijit and Dandela, Rambabu and Gonnade, Rajesh G. and Nangia, Ashwini K.} } @article {48145, title = {Pendant propargyloxy-functionalized aromatic (co)polycarbonates: synthesis, thermal crosslinking and chemical modification}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {59}, year = {2022}, month = {NOV}, pages = {752-763}, type = {Article}, abstract = {

A bisphenol monomer bearing pendant propargyloxy group viz, 1, 1-bis (4-hydoxyphenyl)-1-(4 {\textquoteleft}-propargyloxyphenyl) ethane (BPP) was synthesized starting from commercially available 1, 1, 1-tris (4-hydroxyphenyl) ethane (THPE) by mono O-propargylation reaction using propargyl bromide. A new series of pendant propargyloxy-functionalized aromatic (co)polycarbonates was synthesized by low-temperature solution polycondensation of BPP or different molar ratios of BPP and bisphenol-A with triphosgene in dichloromethane in the presence of triethylamine. The formation of reasonably high molecular weight (co)polycarbonates was confirmed by inherent viscosity (0.52-0.83 dL/g) and gel permeation chromatography (M-n 37,000-69,800 g/mol, polystyrene standards) measurements. C-13 NMR spectral studies supported formation of random copolycarbonates in copolymerization of BPP and BPA with triphosgene. The 10\% weight loss temperature (T-10) values of (co)polycarbonates, determined by thermogravimetric analysis under nitrogen atmosphere, were in the range 427-438 degrees C indicating their good thermal stability. The glass transition temperature (T-g) values of (co)polycarbonates were observed in the range 147-152 degrees C. The crosslinking ability of (co)polycarbonates involving pendant propargyloxy groups leading to formation of networked structure was evaluated via non-isothermal curing studies by DSC. As a proof-of-concept, the post-modification of a representative polycarbonate bearing pendant propargyloxy groups with 1-octane thiol as a model compound via thiol-yne click reaction was briefly studied.

}, keywords = {Aromatic polycarbonate, Chemical modification, propargyloxy groups, thermal crosslinking, thiol-yne click reaction}, issn = {1060-1325}, doi = {10.1080/10601325.2022.2117055}, author = {Nagane, Samadhan S. and Maher, Deepak M. and Verma, Savita and Talanikar, Aniket A. and Wadgaonkar, Prakash P.} } @article {48402, title = {Post-polymerization modifiable aromatic (co)poly(ether sulfone)s possessing pendant norbornenyl groups based upon a new bisphenol}, journal = {European Polymer Journal}, volume = {176}, year = {2022}, month = {AUG }, pages = {111431}, type = {Article}, abstract = {

A new bisphenol possessing pendant norbornenyl group viz., 4, 4 {\textquoteleft}-(bicyclo (2.2.1) hept-5-en-2 yl methylene) bis (2-methoxyphenol) (BPA-NB) was synthesized by a single-step base-catalyzed condensation reaction of 5-norbor-nene-2-carboxaldehyde with guaiacol. NMR spectral data indicated formation of BPA-NB comprising of isomeric components. A series of (co)poly(ether sulfone)s possessing pendant norbornenyl groups was synthesized by nucleophilic aromatic substitution polycondensation of varying molar ratio of BPA-NB and bisphenol-A (BPA) with bis(4-fluorophenyl) sulfone. Inherent viscosity values and number average molecular weights of (co)poly (ether sulfone)s were in the range 0.67-1.01 dL/g and 75,400-1,16,300 g/mol, respectively indicating the formation of reasonably high molecular weight polymers. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)poly(ether sulfone)s. (Co)poly(ether sulfone)s were characterized using FT-IR, H-1 NMR and C-13 NMR spectroscopy, XRD, TGA and DSC analysis. The formation of random copoly(ether sulfone)s was demonstrated by( 13)C NMR analysis. The incorporation of BPA-NB into (co)poly(ether sulfone)s resulted into improvement in Tg values. BPA-NB-based (co)poly(ether sulfone)s offered possibilities for post -modifications involving either methoxyl or norbornenyl groups. A representative copoly(ether sulfone) (PSU-NB-2) possessing pendant norbornenyl groups was chemically modified via thiol-ene reaction with three representative thiol compounds, namely, 1-dodecanethiol, 2-furanmethanethiol and 2-mercaptoethanol to yield corresponding post-modified polymers in a quantitative manner. Additionally, it was demonstrated that copoly (ether sulfone) possessing pendant norbornenyl groups could be used to form insoluble cross-linked gel in the presence of a multifunctional thiol cross-linker.

}, keywords = {(Co)poly(ether sulfone)s, bisphenol, Cross -linking, Pendant norbornenyl groups, Thiol-ene reaction}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2022.111431}, author = {Talanikar, Aniket A. and Nagane, Samadhan S. and Wadgaonkar, Prakash P. and Rashinkar, Gajanan S.} } @article {48201, title = {Pseudo-boehmite AlOOH supported NGr composite-based air electrode for mechanically rechargeable Zn-air battery applications}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {MAY}, pages = {10014-10025}, type = {Article}, abstract = {

Both mechanically and electrically rechargeable zinc-air batteries (ZABs) have received much interest due to their high energy density and suitability for mobile and stationary applications. However, their commercialization has been impeded by the lack of robust, low-cost and environmentally benign catalyst materials that can be easily scaled up. In this context, the present work introduces a new type of transition metal-free catalytic material (AlOOH/NGr) by anchoring the pseudo-boehmite phase of aluminium oxyhydroxide (AlOOH) nanosheets over nitrogen-doped graphene (NGr) via a single-step and straightforward hydrothermal process. Furthermore, density functional theory (DFT) based computation demonstrates that the nucleation of AlOOH starts from the N-sites and points towards the strong surface interaction between AlOOH and NGr via doped nitrogen. AlOOH/NGr consisting of thin layered pseudo-boehmite sheets uniformly distributed over NGr has displayed an oxygen reduction reaction onset potential of 0.83 V and a half-wave potential of 0.72 V, along with good catalytic durability in alkaline medium. With this, AlOOH/NGr, when used as an air electrode for fabricating a primary Zn-air battery, the system has exhibited an open circuit voltage of similar to 1.27 V with a flat discharge profile at a current rate of 10 mA cm(-2). The fabricated system delivered a specific capacity of similar to 720 mA h g(-1) and a high power density of 204 mW cm(-2) and is comparable to the counterpart system based on the state-of-the-art Pt/C (20 wt\% Pt) cathode. Additionally, the homemade battery was able to maintain its performance after 4 times of mechanical recharging of the battery, which lasted for more than 35 h at a discharge current density of 10 mA cm(-2). Thus, we have uncovered the potential of an earth-abundant metal-based catalytic system for fabricating and demonstrating a robust mechanically rechargeable zinc-air battery.

}, issn = {2050-7488}, doi = {10.1039/d2ta00546h}, author = {Kharabe, Geeta Pandurang and Manna, Narugopal and Nadeema, Ayasha and Singh, Santosh K. and Mehta, Shweta and Nair, Aathira and Joshi, Kavita and Kurungot, Sreekumar} } @article {48133, title = {Reactivity of four coordinate iridium complex towards hydrogen: an experimental and computational study}, journal = {Journal of Organometallic Chemistry}, volume = {965}, year = {2022}, month = {MAY}, pages = {122317}, type = {Article}, abstract = {

Reaction of a four coordinate, 16-electron Ir complex, [Ir-(iPr)4(POCOP)(PPh3)] (4 ) (((iPr)4)(POCOP= 2,6-bis(di-isopropyl phosphinito)benzene, kappa(3)-C6H3-1,3-[OP((iPr))(2)](2)), with H-2 resulted in an oxidative addition product, cis-dihydride complex, cis-[Ir(H)(2) ((iPr)4)(POCOP)(PPh3)] ( cis-5 ) presumably via the intermediacy of a sigma complex, [Ir(eta(2)-H-2)((iPr)4)(POCOP)(PPh3)]. The cis-dihydride complex completely isomerizes to the trans-dihydride complex trans-[Ir(H)(2) ((iPr)4)(POCOP)(PPh3)] ( trans-5 ) under ambient conditions in about 3 h. It was found that the steric and electronic features on the iridium center have significant influence on the approach of H-2 onto the metal center followed by oxidative addition and isomerization. The isomerization process was studied in detail and all the mechanistic aspects have been elucidated using a combination of both experimental work and computation. The cis-dihydride complex isomerizes to the trans-dihydride by compensating the trans influence of the strongly trans-directing hydride ligand. A mechanism involving the exchange of the position of PPh3 with a hydride ligand cis to itself via PPh3 dissociation and re-coordination thereby resulting in the formation of the trans-dihydride complex, has been proposed for the isomerization. The cis-dihydride was found to be a highly active catalyst for hydrogenation of ethy-lene. A competing reactivity study of cis-dihydride between isomerization versus insertion of C2H4 into the Ir-H bond, was studied experimentally and computationally. (c) 2022 Elsevier B.V. All rights reserved.

}, keywords = {Hydrogenation, Insertion, iridium complex, isomerization, Oxidative addition, Reductive elimination}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2022.122317}, author = {Agrawal, Nisha K. and Dash, Soumya R. and Vanka, Kumar and Nethaji, Munirathinam and Jagirdar, Balaji R.} } @article {48091, title = {Reference quality genome sequence of Indian pomegranate cv. {\textquoteleft}Bhagawa{\textquoteright} (Punica granatum L.)}, journal = {Frontiers in Plant Science}, volume = {13}, year = {2022}, month = {SEP}, pages = {947164}, type = {Article}, abstract = {

Pomegranate is an important fruit crop for ensuring livelihood and nutrition security in fragile semi-arid regions of the globe having limited irrigation resources. This is a high-value, nutritionally rich, and export-oriented agri-commodity that ensures high returns on investment to growers across the world. Although it is a valuable fruit crop, it has received only a limited genomics research outcome. To fast-track the pomegranate improvement program, de novo whole-genome sequencing of the main Indian cultivar {\textquoteleft}Bhagawa{\textquoteright} was initiated by the Indian Council of Agricultural Research-National Research Center on Pomegranate (ICAR-NRCP). We have demonstrated that a combination of commercially available technologies from Illumina, PacBio, 10X Genomics, and BioNano Genomics could be used efficiently for sequencing and reference-grade de novo assembly of the pomegranate genome. The research led to a final reference-quality genome assembly for {\textquoteleft}Bhagawa{\textquoteright} of 346.08 Mb in 342 scaffolds and an average N50 of 16.12 Mb and N90 of 1088.62 Kb. This assembly covered more than 98\% of the estimated pomegranate genome size, 352.54 Mb. The LTR assembly index (LAI) value of 10 and 93.68\% Benchmarking Universal Single-Copy Orthologs (BUSCO) completeness score over the 1,440 ortholog genes of the completed pomegranate genome indicates the quality of the assembled pomegranate genome. Furthermore, 29,435 gene models were discovered with a mean transcript length of 2,954 bp and a mean coding sequence length 1,090 bp. Four transcript data samples of pomegranate tissues were mapped over the assembled {\textquoteleft}Bhagawa{\textquoteright} genome up to 95\% significant matches, indicating the high quality of the assembled genome. We have compared the {\textquoteleft}Bhagawa{\textquoteright} genome with the genomes of the pomegranate cultivars {\textquoteleft}Dabenzi{\textquoteright} and {\textquoteleft}Taishanhong.{\textquoteright} We have also performed whole-genome phylogenetic analysis using Computational Analysis of Gene Family Evolution (CAFE) and found that Eucalyptus grandis and pomegranate diverged 64 (60-70) million years ago. About 1,573 protein-coding resistance genes identified in the {\textquoteleft}Bhagawa{\textquoteright} genome were classified into 32 domains. In all, 314 copies of miRNA belonging to 26 different families were identified in the {\textquoteleft}Bhagawa{\textquoteright} genome. The reference-quality genome assembly of {\textquoteleft}Bhagawa{\textquoteright} is certainly a significant genomic resource for accelerated pomegranate improvement.

}, keywords = {genome sequencing, hybrid genome assembly, Long Terminal Repeats Assembly Index (LAI), PacBio, pomegranate}, issn = {1664-462X}, doi = {10.3389/fpls.2022.947164}, author = {Roopa Sowjanya, P. and Shilpa, Parashuram and Patil, Goudappa Prakash and Babu, Dhinesh Karuppannan and Sharma, Jyotsana and Sangnure, Vipul R. and Mundewadikar, Dhananjay M. and Natarajan, Purushothaman and Marathe, Arvind Rajiv and Reddy, Umesh K. and Singh, Vikram Nripendra} } @article {48386, title = {Reinforcement of electrospun polyurethane fibers with resorcinol-formaldehyde resin}, journal = {Journal of Applied Polymer Science}, volume = {139}, year = {2022}, month = {MAY}, pages = {e52007}, type = {Article}, abstract = {

This work reports a simple method to improve the properties of electrospun nanofibers. The procedure involves developing nanofibers using electrospinning followed by liquid infiltration to reinforce the fibers. Coating of polyurethane nanofibers (PUN) with resorcinol-formaldehyde (RF) significantly improves the properties of PUN. Furthermore, the morphology of fiber interface and the properties of RF coated fibers indicate that RF resin reinforces the interface between the fibers. The method leads to improvement in mechanical properties of PUN. An improvement of about 94\% and 281\% in mechanical properties like tensile strength and modulus, respectively, compared to neat PUN fibers is achieved by coating with 20\% wt/vol of RF solution.

}, keywords = {Dynamic mechanical analysis, electrospinning, liquid infiltration, polyurethane, reinforced nanofibers, resorcinol-formaldehyde}, issn = {0021-8995}, doi = {10.1002/app.52007}, author = {Nair, Kiran Sukumaran and James, Nirmala Rachel} } @article {47656, title = {Role of facet in the competitive pathway of ethylene epoxidation}, journal = {Surface Science}, volume = {716}, year = {2022}, month = {FEB}, pages = {121954}, type = {Article}, abstract = {Ethylene epoxide (EtO) is used as raw material for a broad range of products from pharmaceuticals and plastics to paints and adhesives. Although the reaction of ethylene interacting with preadsorbed oxygen on Ag surface is known for decades, the underlying mechanism of EtO formation is not completely understood. Successful investigation of oxametallacycle (OMC) intermediate common to selective as well as non-selective pathways has ensured at least 50\% selectivity. The current study brings out the electronic signatures of distinct conformers of OMC stabilised on two different facets of Ag viz. (100) and (111). There are subtle differences between OMC conformers observed on these two facets with near-eclipsed on Ag(100) and near-staggered on Ag(111). A detailed analysis of Ag-O, C-O, C-C, and Ag-C interactions along with projected Density of States (pDOS) and projected Crystal Orbital Hamilton Population (pCOHP) imply towards ring closure on Ag(100) and hydrogen transfer on Ag(111). Finally, our understanding based on electronic and structural signatures are backed up by activation barriers computed through NEB calculations. Activation barrier for EtO is lower on (100) as compared to (111) facet. Thus, our study sheds light on how these differences between OMC affect the selectivity towards EtO.}, keywords = {Ag(100), Ag(111), DFT, epoxidation, Ethylene Oxide (EtO), OMC}, issn = {0039-6028}, doi = {10.1016/j.susc.2021.121954}, author = {Nair, Aathira and Kenge, Nivedita and Joshi, Kavita} } @article {48163, title = {Ru, Pd doped WO3 nanomaterials: a synergistic effect of noble metals to enhance the acetone response properties}, journal = {Ceramics International}, volume = {48}, year = {2022}, month = {JUN}, pages = {17923-17933}, type = {Article}, abstract = {

Noble metals (NMs) have an enormous impact on the intrinsic properties of the metal oxides. We report the synergistic effect of Ruthenium (Ru) and Palladium (Pd) noble metals on the enhancement of gas sensing properties of pure tungsten oxide (WO3). The gas sensing material is synthesized by simple and straight forward precipitation route, and its physico-chemical analyses are determined using XRD, FESEM, TEM/HRTEM, FFT, UV-Vis, XPS, EDAX, and BET measurements. Use of the developed material as a gas sensor is evaluated using several target gases (oxidizing as well as reducing), with acetone showing the best selectivity. The noble metal doping and hence catalytic action improved the gas response qualities. The synergistic effect of Ru and Pd on WO3 gas response properties are identified, where the effect is 99.80\% sensitivity, and lower response/recovery time (10 s and 2 min) at 300 degrees C operating temperature. Nonetheless, the sensors displayed better gas sensing properties even at lower operating temperatures ranging from 200 to 275 degrees C. In addition, the synergistic effect has displayed the dramatic enhancement in the sensitivity to 76.44\% at barely 10 ppm acetone concentration. This particular result will undoubtedly be helpful for diagnostic purpose of diabetic patients, and a strong candidate for prospective gas sensing applications, particularly acetone.

}, keywords = {Acetone vapours, Precipitation route, Ru -Pd doping, synergistic effect, WO3}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2022.03.065}, author = {Kodam, Pavan M. and Ghadage, Pandurang A. and Nadargi, Digambar Y. and Shinde, K. P. and Mulla, Imtiaz S. and Park, J. S. and Suryavanshi, Sharad S.} } @article {48344, title = {Scalable mechanochemical synthesis of beta-ketoenamine-linked covalent organic frameworks for methane storage}, journal = {Chemistry-An Asian Journal}, volume = {17}, year = {2022}, month = {DEC}, type = {Article}, abstract = {

In the current scenario of increased pollution and releasing toxic gases by burning petroleum products, switching to natural gas is more promising for reducing CO2 emissions and air pollutants. Hence, research on Liquefied Natural Gas and Compressed Natural Gas is gaining more value. However, natural gas primarily consists of CH4, which has less energy density than conventional fuels. Interestingly, since the C-H ratio of CH4 gas is 1 : 4, it is easily combustible, gives less carbon footprint, and reduces unburnt hydrocarbon pollution. Hence, research on storing and transporting CH4 has utmost importance, and porous materials are one of the suitable candidates for storing CH4. Herein we report the scalable synthesis of highly porous and crystalline covalent organic frameworks for storing CH4 at room temperature and pressure. Two COFs, namely, Tp-Azo and Tp-Azo-BD(Me)(2), synthesized in 1 kg at similar to 45 g batch scale using a Planetary mixer, displayed a maximum BET surface area of around 3345 m(2)/g, and 2342 m(2)/g and CH4 storage of 174.10 cc/cc and 151 cc/cc, respectively. A comparison of the CH4 sorption of Tp-Azo and Tp-Azo-BD(Me)(2) COFs synthesized in different batches has a variation of only +/- 5 cc/cc and shows the consistency in bulk scale synthesis of COFs. The cyclic equilibrium CH4 adsorption studies showed the COFs are stable with consistent CH4 adsorption and desorption cycles. The present study is a step towards the scalable mechanochemical synthesis of COFs for gas storage applications.

}, keywords = {CH4 storage, COF, porous material, scalable synthesis}, issn = {1861-4728}, doi = {10.1002/asia.202201012}, author = {Asokan, Kiran and Patil, Manoj Krishnat and Mukherjee, Shatabdi Porel and Sukumaran, Santhosh Babu and Nandakumar, T.} } @article {48176, title = {Silk fibroin and recombinant elastin blend nano-coatings for implantable medical devices}, journal = {Materials Today Communications}, volume = {33}, year = {2022}, month = {DEC}, pages = {104875}, type = {Article}, abstract = {

Silicone breast implants are conventionally used to reconstruct the shape and size of the breast in breast cancer patients. However, rate of failure of implants due to formation of capsular contracture is significantly high. Recent studies have shown that coating the surface of the implant with a biocompatible polymer can mitigate this risk. Here, we have modified the surface of implant using a biocompatible natural biopolymer silk fibroin (SF). Further, we have developed formulations of SF with a recombinantly produced elastin-like-peptide (ELP) and compared their performance with a known anti-fouling hydrophilic polymer - polyethylene oxide (PEO). Microscopic and spectroscopic characterization confirm the formation of uniform coatings. These coatings have been also characterized for their ability to resists crack formation. Further, the coatings have been evaluated for their biological performance. Our studies show that addition of 25 wt\% of ELP to SF significantly enhances the crack resistance for the coatings. In addition, SF/ELP coatings reduce the adsorption of blood plasma proteins by more than 80 \%. Preliminary analysis shows that the SF/ELP blend coatings are non-cytotoxic and support adhesion, growth and proliferation of fibroblast cells. The study therefore demonstrates that SF/ELP coatings have the potential to mitigate the risk of breast implant failure.

}, keywords = {Blood plasma, Crack resistance, Protein adsorption, Recombinant elastin, Silk fibroin}, doi = {10.1016/j.mtcomm.2022.104875}, author = {Joseph, Emmanuel and Kane, Kartiki and Parekh, Nimisha and Nisal, Anuya and Janorkar, V. Amol} } @article {48079, title = {Silk fibroin microparticle scaffold for use in bone void filling: safety and efficacy studies}, journal = {ACS Biomaterials Science \& Engineering}, volume = {8}, year = {2022}, month = {MAR}, pages = {1226-1238}, type = {Article}, abstract = {

Silk fibroin (SF) is a natural biocompatible protein polymer extracted from cocoons of silkworm Bombyx mori. SF can be processed into a variety of different forms and shapes that can be used as scaffolds to support bone regeneration. Threedimensional (3D) SF scaffolds have shown promise in bone-void -filling applications. In in vitro studies, it has been demonstrated that a microparticle-based SF (M-RSF) scaffold promotes the differentiation of stem cells into an osteoblastic lineage. The expression of differentiation markers was also significantly higher for M-RSF scaffolds as compared to other SF scaffolds and commercial ceramic scaffolds. In this work, we have evaluated the in vitro and in vivo biocompatibility of M-RSF scaffolds as per the ISO 10993 guidelines in a Good Laboratory Practice (GLP)-certified facility. The cytotoxicity, immunogenicity, genotoxicity, systemic toxicity, and implantation studies confirmed that the M-RSF scaffold is biocompatible. Further, the performance of the MRSF scaffold to support bone formation was evaluated in in vivo bone implantation studies in a rabbit model. Calcium sulfate (CaSO4) scaffolds were chosen as reference material for this study as they are one of the preferred materials for bone-void -filling applications. M-RSF scaffold implantation sites showed a higher number of osteoblast and osteoclast cells as compared to CaSO4 implantation sites indicating active bone remodeling. The number density of osteocytes was double for M-RSF scaffold implantation sites, and these M-RSF scaffold implantation sites were characterized by enhanced collagen deposition, pointing toward a finer quality of the new bone formed. Moreover, the M-RSF scaffold implantation sites had a negligible incidence of secondary fractures as compared to the CaSO4 implantation sites (similar to 50\% sites with secondary fracture), implying a reduction in postsurgical complications. Thus, the study demonstrates that the M-RSF scaffold is nontoxic for bone-void -filling applications and facilitates superior healing of fracture defects as compared to commercial calcium-based bone void fillers.

}, keywords = {Biocompatibility, biological safety, bone void filler, ISO 10993, M-RSF, Serioss, Silk fibroin}, issn = {2373-9878}, doi = {10.1021/acsbiomaterials.1c01103}, author = {Deshpande, Rucha and Shukla, Swati and Kale, Amod and Deshmukh, Narendra and Nisal, Anuya and Venugopalan, Premnath} } @article {47834, title = {Silver-catalyzed [3 + 3]-annulation cascade of alkynyl alcohols and α,β-unsaturated ketones for the regioselective assembly of chromanes}, journal = {Organic Chemistry Frontiers}, volume = {9}, year = {2022}, month = {JAN}, pages = {802-809}, type = {Article}, abstract = {An unprecedented Ag(i)-catalyzed [3 + 3]-annulation of alkynyl alcohols (5-hexyn-1-ols) and α,β-unsaturated ketones is reported to construct simple to complex chromanes. This transformation begins with hydroalkoxylation of alkynol through C{\textendash}C triple bond activation to give cyclic-enol ether, followed by intermolecular 1,4-addition and intramolecular 1,2-addition of enol ethers onto the enone and oxidative aromatization or Grob-type elimination steps. Facile reaction conditions, broad substrate scope, good to excellent yields, and atom economy are the salient features of this protocol. Isolation of the active pyran-tethered cyclohexadiene reaction intermediate, additional supporting experiments, and DFT calculations strongly support the experimental findings and corroborate our proposed mechanism.}, issn = {2052-4129}, doi = {10.1039/D1QO01643A}, author = {Nakate, Ashwini K. and Thorat, Sagar S. and Jain, Shailja and Rama Krishna, Gamidi and Vanka, Kumar and Kontham, Ravindar} } @article {48211, title = {Spinel magnesium ferrite (MgFe2O4): a glycine-assisted colloidal combustion and its potentiality in gas-sensing application}, journal = {Chemosensors}, volume = {10}, year = {2022}, month = {SEP}, pages = {361}, type = {Article}, abstract = {

Herein, we describe the facile synthesis of spinel MgFe2O4 ferrite and its potential use as a gas sensor using a straightforward and reliable sol-gel approach, i.e., the glycine-assisted auto-combustion route. The novelty in obtaining the sensing material via the auto-combustion route is its inherent simplicity and capability to produce the material at an industry scale. The said cost-effective process makes use of simple metal salts (Mg and Fe-nitrates) and glycine in an aqueous solution, which leads to the formation of spinel MgFe2O4 ferrite. A single-phase crystallinity with crystallite sizes ranging between 36 and 41 nm was observed for the synthesized materials using the X-ray diffraction (XRD) technique. The porous morphologies of the synthesized materials caused by auto-ignition during the combustion process were validated by the microscopic investigations. The EDS analysis confirmed the constituted elements such as Mg, Fe, and O, without any impurity peaks. The gas-sensing ability of the synthesized ferrites was examined to detect various reducing gases such as LPG, ethanol, acetone, and ammonia. The ferrite showed the highest response (\>80\%) toward LPG with the response and recovery times of 15 s and 23 s, respectively. Though the sensor responded low toward ammonia (similar to 30\%), its response and recovery times were very quick, i.e., 7 s and 9 s, respectively. The present investigation revealed that the synthesized ferrite materials are good candidates for fabricating high-performance sensors for reducing gases in real-world applications.

}, keywords = {Gas sensors, glycine combustion, MgFe2O4, reducing gases}, doi = {10.3390/chemosensors10090361}, author = {Nadargi, Digambar and Umar, Ahmad and Nadargi, Jyoti and Patil, Jayvant and Mulla, Imtiaz and Akbar, Sheikh and Suryavanshi, Sharad} } @article {48134, title = {Sponge microflowers of NiCo2O4: a versatile material for high performance supercapacitor}, journal = {Journal of Porous Materials}, volume = {29}, year = {2022}, month = {AUG}, pages = {1239-1252}, type = {Article}, abstract = {

We report the development of well optimised NiCo2O4 microflowers for high performance supercapacitor application. The efforts were made to optimise the electrode material by tuning the synthetic as well as electrolyte concentration parameters such as (i) hydrothermal reaction temperature, (ii) hydrothermal reaction time, (iii) sintering temperature, and (iv) electrolyte concentration. The physico-chemical and supercapacitive properties were analysed using TGA, XRD, SEM/TEM/HRTEM, XPS, BET, and electrochemical measurements. The well optimised electrode material was obtained at 150 degrees C hydrothermal reaction temperature, 12 h of hydrothermal reaction time, 300 degrees C sintering temperature, and 3 M KOH electrolyte concentration. The optimised sample displayed high specific -capacitance (1478 F/g), -energy density (16.5 Wh/kg), and -power density (248 W/kg). The specific capacitance can be retained to 97.61\% after 1000 cycles. The developed NiCo2O4 microflower structures are well optimised and offer great promise for future industrial applications.

}, keywords = {hydrothermal, Microflowers, Nickel cobaltite, supercapacitor}, issn = {1380-2224}, doi = {10.1007/s10934-022-01247-9}, author = {Ghadage, Ambar and Kodam, Pavan and Nadargi, Digambar and Shinde, K. P. and Mulla, Imtiaz and Park, J. S. and Suryavanshi, Sharad} } @article {48368, title = {Structure-property insights into chiral thiophene copolymers by direct heteroarylation polymerization}, journal = {European Polymer Journal}, volume = {181}, year = {2022}, month = {DEC }, pages = {111676}, type = {Article}, abstract = {

Chiral thiophene copolymers with fluorene as co monomer are designed having N-Boc-L-glutamic acid-1-tert-butyl ester as a chiral substituent located either on the thiophene unit or the fluorene unit with varying spacer length. The atom-economic direct heteroarylation polymerization (DHAP) method is utilized for the polymerization. Gibb{\textquoteright}s free energy (delta G) for polymerization determined using DFT calculations indicate difficulty in achieving high molar mass when the bulky chiral substituents are attached through short spacer to the backbone. The experimental observations are in agreement with the theoretical calculations with no polymer-ization or very low molar mass sticky compounds obtained for reactions with predicted + \& UDelta;G values. Structure -property relationship are compared for two chiral polymers -P4 and P5 having the chiral substitution on thiophene and fluorene units respectively. No CD signal is observed in THF-a good solvent where the polymers are molecularly dissolved. Intense bisignated CD signal is observed for both polymers upon addition of methanol - a poor solvent, to their THF solution. The bisignate CD signal with maxima at lower wavelength and inflection point associated with the pi-pi* absorption band is characteristic of exciton coupling between polymer chains in a left handed helical orientation. Small differences are observed in the intensity of the CD signal for the polymers P4 and P5 highlighting the impact of steric hindrance of bulky pendant groups on polymer conformation. DHAP is an atom economic polymerization procedure that can be gainfully utilized for developing chiral conjugated polymers.

}, keywords = {chiral, DFT, Direct heteroarylation polymerization, Gibb?s free energy, Steric Hindrance}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2022.111676}, author = {Nikam, Shrikant B. and Singh, Chandrodai Pratap and Krishnamurty, Sailaja and Asha, S. K.} } @article {47642, title = {Studies directed toward the synthesis of hedycoropyrans: total synthesis of des-hydroxy (-)-hedycoropyran B (ent-rhoiptelol B)}, journal = {Organic \& Biomolecular Chemistry}, volume = {20}, year = {2022}, month = {JAN }, pages = {444-463}, type = {Article}, abstract = {A full account of our efforts directed towards the synthesis of the diarylheptanoid-derived natural products hedycoropyrans that led to the total synthesis of ent-rhoiptelol B is described. In this endeavor, we have attempted two distinct synthetic strategies to access hedycoropyrans A and B, which led us to establish a facile synthetic route for des-hydroxy (-)-hedycoropyran B (ent-rhoiptelol B) from simple and readily accessible building blocks of 4-allylanisole and vanillin, employing Sharpless asymmetric epoxidation, CBS reduction, and an intramolecular AgOTf-catalyzed oxa-Michael reaction of suitably functionalized hydroxy-ynone as key transformations. The investigations disclosed herein will provide insights into designing novel synthetic routes for THP-DAH-derived natural products.}, issn = {1477-0520}, doi = {10.1039/d1ob01972d}, author = {Kataria, Priyanka and Nomula, Rajesh and Kontham, Ravindar} } @article {48045, title = {Studies directed toward the total synthesis of nannocystin A}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {NOV}, pages = {e202203893}, type = {Article}, abstract = {

A full account of our efforts directed toward the stereoselective total synthesis of nannocystin A, a macrocyclic myxobacterial metabolite, is presented. In this endeavor, we have attempted two distinct synthetic routes to access polyketide fragment (C1-C11) of macrocyclic depsipeptide (21-membered) natural product from readily accessible building blocks 1,3-propanediol and benzaldehyde employing Evans aldol, CBS reduction, Heck cross-coupling, and Sharpless asymmetric epoxidation as key transformations. Ultimately, accomplished the synthesis of the complete skeleton (21-membered precursor for macrocyclic depsipeptide) of the nannocystin A possessing desired stereochemistry and functional groups.

}, keywords = {amidation, Depsipeptide, Evans aldol reaction, Macrocycle, Nannocystins}, issn = {2365-6549}, doi = {10.1002/slct.202203893}, author = {Nomula, Rajesh and Pratapure, Madhukar S. and Kontham, Ravindar} } @article {48092, title = {Study on anisotropy in wire arc additively manufactured Inconel 625 multi-layered wall and its correlation with molten pool thermal history}, journal = {Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing}, volume = {840}, year = {2022}, month = {APR}, pages = {142865}, type = {Article}, abstract = {

In the present study, the variation in molten pool thermal history with layer number during wire arc additive manufacturing of Inconel 625 wall was investigated. Further, its effect on the evolution of microstructure and anisotropy in mechanical and corrosion properties was reported. During the deposition process, the molten pool thermal history was monitored using a non-contact type IR pyrometer operating at 1.6 mu m wavelength. A total number of 40 layers were deposited, building a wall of 60 mm height. With an increase in layer number, the molten pool lifetime and cooling rate were found to increase and decrease, respectively, resulting in coarse grains and increased elemental segregation or Laves phase formation. To investigate its effect on mechanical properties, the samples were collected in a skewed fashion along the height with orientation in the deposition direction. The tensile specimens collected close to the substrate exhibited better strength and ductility, while the samples from the top location of the wall exhibited a relatively brittle mode of fracture, which was investigated by carrying out the fracture surface analysis using SEM. Corrosion test was also conducted along the height of the wall, wherein the samples close to substrate exhibited better corrosion resistance due to refined microstructure and low elemental segregations. Further, EDS, XRD analysis and hardness test were carried out to investigate the elemental composition, variation in phases and hardness with layer number, respectively.

}, keywords = {anisotropy, Layer number, mechanical properties, Molten pool thermal history, Wire arc additive manufacturing}, issn = {0921-5093}, doi = {10.1016/j.msea.2022.142865}, author = {Nagallapati, Vishwanath and Choudhary, Amit and Torris, Arun and Muvvala, Gopinath and Dadasaheb, Sagar Pawar and Gudur, Srinath Ellaswamy} } @article {48106, title = {Superior processability of Antheraea mylitta silk with cryo-milling: performance in bone tissue regeneration}, journal = {International Journal of Biological Macromolecules}, volume = {213}, year = {2022}, month = {JUL}, pages = {155-165}, type = {Article}, abstract = {

Non-mulberry silk polymers have a promising future in biomedical applications. However, the dissolution of nonmulberry silk fiber is a still challenge and this poor processability has limited the use of this material. Here, we report a unique protocol to process the Antheraea mylitta (AM) silk fiber. We have shown that the cryo-milling of silk fiber reduces the beta sheet content by more than 10\% and results in an SF powder that completely dissolves in routine solvents like trifluoroacetic acid (TFA) within few hours to form highly concentrated solutions (\~20 wt \%). Further, these solutions can be processed using conventional processing techniques such as electrospinning to form 3D scaffolds. Bombyx mori (BM) silk was used as a control sample in the study. In-vitro studies were also performed to monitor cell adhesion and proliferation and hMSCs differentiation into osteogenic lineage. Finally, the osteogenic potential of the scaffolds was also evaluated by a 4-week implantation study in rat calvarial model. The in-vitro and in-vivo results show that the processing techniques do not affect the biocompatibility of the material and the AM scaffolds support bone regeneration. Our results, thus, show that cryo-milling facilitates enhanced processability of non-mulberry silk and therefore expands its potential in biomedical applications.

}, keywords = {Bone tissue engineering, Calvarial defect, hMSCs, Non-mulberry silk fiber, Processing technique}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2022.05.122}, author = {Parekh, Nimisha and Bijosh, C. K. and Kane, Kartiki and Panicker, Alaka and Nisal, Anuya and Wangikar, Pralhad and Agawane, Sachin} } @article {48165, title = {Synthesis and antimycobacterial screening of a novel series of alpha-amino acids containing thiazole linker}, journal = {ARKIVOC}, year = {2022}, type = {Article}, abstract = {

A small focused library of uncommon (S)-2-amino-3-(4-(((4-methyl-2-arylthiazol-5-yl)methyl)amino)phenyl) propanoic acid (5a-e) and (S)-2-amino-3-(4-(((2-arylthiazol-4-yl)methyl)amino)phenyl)propanoic acid (9a-d) derivatives have been efficiently synthesized by employing molecular simplification. The title compounds were screened for inhibitory activity against Mycobacterium tuberculosis H37Ra (MTB) and Mycobacterium bovis (BCG) strains. The cytotoxicity study was conducted against primary Human Umbilical Vein Endothelial Cells (HUVECs), on two different human tumor cells HeLa, and HCT 116 and was observed non-toxic to host cells.

}, keywords = {Amino acid, antibacterial activity, Cytotoxicity, Mycobacterium tuberculosis, synthesis, Thiazole}, issn = {1551-7004}, doi = {10.24820/ark.5550190.p011.831}, author = {Nalawade, Jitendra L. and Mhaske, Pravin C. and Shinde, Abhijit D. and Chavan, Abhijit P. and Abhale, Yogita K. and Sarkar, Dhiman and Bobade, Vivek D.} } @article {48204, title = {Synthesis and characterization of partially biobased aromatic (Co)polycarbonates containing biphenylene units and pendant pentadecyl chains}, journal = {Macromolecular Chemistry and Physics}, volume = {223}, year = {2022}, month = {JUL}, pages = {2100449}, type = {Article}, abstract = {

2-Pentadecyl-[1,1{\textquoteright}{\textquoteright}-biphenyl]-4,4{\textquoteright}{\textquoteright}-diol (PBD) is synthesized starting from cashew nut shell liquid-a by-product of cashew processing industry. A new series of partially biobased aromatic (co)polycarbonates possessing biphenylene units and pendant pentadecyl chains is synthesized by solution polycondensation of PBD or varying compositions of PBD and bisphenol-A with triphosgene in dry dichloromethane. Inherent viscosities and number average molecular weights of (co)polycarbonates are in the range 0.51-1.24 dL g(-1) and 18 x 10(3)- 43.4 x 10(3) g mol(-1), respectively indicating the formation of reasonably high molecular weight polymers. Flexible, transparent, and free-standing films of (co)polycarbonates can be cast from chloroform solution. (Co)polycarbonates are characterized using Fourier transform infrared spectroscopy (FTIR), H-1 NMR, C-13 NMR spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry, and thermogravimetric analysis. T-10 and T-g values of (co)polycarbonates are in the range 417-433 and 8-147 degrees C, respectively. It is demonstrated that the T-g values can be tuned by incorporation of appropriate mol\% of PBD as a comonomer in Bisphenol-A-based copolycarbonates. The lowering of the T-g values of (co)polycarbonates can be attributed primarily to the packing disruptive effect of flexible pentadecyl chains. Furthermore, the effect of incorporation of PBD as a comonomer on water contact angle values of (co)polycarbonates is evaluated.

}, keywords = {aromatic polycarbonates, biobased bisphenol, Cashew nut shell liquid, pentadecyl chain, Renewable resources}, issn = {1022-1352}, doi = {10.1002/macp.202100449}, author = {Ichake, Amol B. and Nagane, Samadhan S. and Jadhav, Uday A. and Torris, Arun and Grau, Etienne and Cramail, Henri and Wadgaonkar, Prakash P.} } @article {48431, title = {Synthesis and ionic conductivity of calcium-doped ceria relevant to solid oxide fuel cell applications}, journal = {Materials Advances}, volume = {3}, year = {2022}, month = {OCT}, pages = {8780-8791}, type = {Article}, abstract = {

Towards the development of green energy devices, it is necessary to focus on commercial electrolyte materials for intermediate temperature solid oxide fuel cells (IT-SOFCs). Ca-doped ceria (CDC) samples having a composition of Ce(1-x)CaxO2-δ\ (0.03 <=\ x\ <= 0.1) were synthesized by a facile solid-state route and sintered at a lower temperature (1473 K). X-ray diffraction, Raman, X-ray photoelectron, Fourier-transform infrared, UV{\textendash}VIS diffuse reflectance, field emission scanning electron microscopy {\textendash} energy dispersive X-ray with elemental mapping, and electrochemical impedance spectroscopy techniques were used for the characterization of these CDC samples. The 0.10 CDC showed high oxide ion conductivity of 8.01 {\texttimes} 10-3\ S cm-1\ at 973 K with a lower activation energy of 0.78 eV. The 0.03 CDC, 0.05 CDC, and 0.07 CDC samples exhibited ionic conductivities of 1.66 {\texttimes} 10-4, 4.42 {\texttimes} 10-3, and 5.76 {\texttimes} 10-3\ S cm-1\ at 973 K with activation energies of 1.65, 1.01, and 0.92 eV, respectively. The present work aims to develop Ca-doped ceria as economically viable electrolytes for IT-SOFCs.

}, doi = {10.1039/D2MA00868H}, author = {Momin, Naeemakhtar and Manjanna, J. and Kobayashi, Satoru and Aruna, S. T. and Kumar, S. Senthil and Nayaka, G. P.} } @article {48433, title = {Synthesis, characterization and post-modification of aromatic (Co)polyesters possessing pendant maleimide groups}, journal = {High Performance Polymers}, volume = {35}, year = {2022}, month = {SEP}, type = {Article}, abstract = {

A new series of (co)polyesters possessing pendent maleimide groups was synthesized by low temperature solution polycondensation of 4, 4{\textquoteright}-(5-maleimidopentane-2, 2-diyl) diphenol (BPA-MA) with isophthalic acid chloride (IPC), terephthalic acid chloride (TPC) and a mixture of TPC and IPC (50:50\ mol \%). Copolyesters were also synthesized by polycondensation of varying compositions of BPA-MA and bisphenol-A (BPA) with IPC. The chemical structures and compositions of (co)polyesters were confirmed by NMR spectroscopy. Inherent viscosity values and number-average molecular weights of (co)polyesters were in the range 0.50{\textendash}0.76\ dL/g and 17,700-32,100\ g/mol, respectively, indicating the formation of reasonably high molecular weight polymers. (Co)polyesters were readily soluble in common organic solvents and could be cast into tough, transparent and flexible films from chloroform solutions. (Co)polyesters exhibited 10\% weight loss and glass transition temperatures in the range 464{\textendash}468 and 142{\textendash}178{\textdegree}C, respectively. A representative copolyester possessing pendant maleimide groups was chemically modified\ via\ metal-free azide-maleimide 1,3-dipolar cycloaddition click reaction with two azido compounds, namely, (azidomethyl)benzene (Bz-N3) and 1-(azidomethyl)-pyrene (Py-N3) to yield corresponding modified copolyesters in a quantitative manner.

}, author = {Jadhav, Uday A. and Nagane, Samadhan S. and Wadgaonkar, Prakash P.} } @article {48138, title = {Synthesis, characterization and UV-crosslinking of aromatic (Co)polycarbonates bearing pendant azido groups}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {SEP}, pages = {e202201020}, type = {Article}, abstract = {

A new series of (co)polycarbonates bearing pendent azido groups was synthesized by polycondensation of varying molar proportions of 4, 4{\textquoteright}-(5-azidopentane-2, 2-diyl) diphenol and bisphenol-A with triphosgene. The chemical structures, compositions and random nature of (co)polycarbonates were confirmed by NMR spectroscopy. Inherent viscosities and number-average molecular weights of (co)polycarbonates were in the range 0.63-0.77 dL g(-1) and 35,400-43,400 g mol(-1), respectively indicating the formation of reasonably high molecular weight polymers. (Co)polycarbonates could be cast into tough, transparent and flexible films from chloroform solutions. (Co)polycarbonates were further characterized using IR spectroscopy, XRD, TGA and DSC. The thermal crosslinking of (co)polycarbonates bearing pendant azido groups was studied by DSC analysis. Independently, (co)polycarbonates bearing pendant azido groups were exposed to UV irradiation at wavelength of 254 nm and decomposition reaction of azido groups was monitored by FT-IR spectroscopy. The complete decomposition of azido groups was observed with exposure time of 30 min. The formed cross-linked (co)polycarbonates exhibited improved \% char yield values compared to parent (co)polycarbonates. The measurement of mechanical properties of representative crosslinked (co)polycarbonates indicated increase in tensile strength and Young{\textquoteright}s modulus and decrease in \% elongation compared to corresponding parent linear (co)polycarbonates.

}, keywords = {Aromatic polycarbonate, Pendant azido group, solution polycondensation, Triphosgene, UV-crosslinking}, issn = {2365-6549}, doi = {10.1002/slct.202201020}, author = {Nagane, Samadhan S. and Kuhire, Sachin S. and Ichake, Amol B. and Talanikar, Aniket A. and Lochab, Bimlesh and Wadgaonkar, Prakash P.} } @article {48432, title = {Synthesis of ternary cocrystals, salts, and hydrates of acefylline with enhanced dissolution and high permeability}, journal = {Crystal Growth \& Design}, volume = {22}, year = {2022}, month = {JUN}, pages = {4165{\textendash}4181}, abstract = {

Acefylline (ACF) is a stimulant xanthine derivative drug, which is formulated as a piperazine salt for the treatment of bronchial asthma. ACF falls under BCS class IV category of low solubility and poor permeability, which together limit the bioavailability and efficacy of the drug. In this work, ACF binary and ternary cocrystals, salts{\textendash}cocrystals, and their polymorphs are synthesized by cocrystallization with several coformers. Two different methods were adopted for the supramolecular assembly of the ternary systems A.B.C: (1) first, binary adducts A.B or A.C were crystallized by grinding a slurry of the components in a suitable solvent and then C was added and grinding was continued; and (2) all three components were taken in a solvent slurry and ground together. The former method was found to be superior in affording the ternary salt/cocrystal. The role of laboratory seeding is implicated to explain the variation in crystallization results at different stages of the project. Crystal structures of the product{\textquoteright}s binary and ternary systems were solved by single-crystal X-ray diffraction and powder X-ray diffraction data for structure solution. The crystal structures show the recurrence of carboxylate{\textendash}pyridinium and imidazole{\textendash}acid heterosynthons in the binary and ternary adducts. The intermolecular interactions between ACF and the coformer are analyzed by Hirshfeld surfaces, 2D fingerprint plots, and an energy framework. The permeability of ACF increases in binary and ternary systems with selected coformers. The fast dissolution and high permeability of ACF-PIP make this salt an improved crystalline formulation of acefylline.

}, doi = {10.1021/acs.cgd.2c00184}, author = {Allu, Suryanarayana and Garai, Abhijit and Chernyshev, Vladimir V. and Nangia, Ashwini K.} } @article {48403, title = {Temporal analysis of melanogenesis identifies fatty acid metabolism as key skin pigment regulator}, journal = {Plos Biology}, volume = {20}, year = {2022}, month = {MAY}, pages = {e3001634}, type = {Article}, abstract = {

Therapeutic methods to modulate skin pigmentation has important implications for skin cancer prevention and for treating cutaneous hyperpigmentary conditions. Towards defining new potential targets, we followed temporal dynamics of melanogenesis using a cell-autonomous pigmentation model. Our study elucidates 3 dominant phases of synchronized metabolic and transcriptional reprogramming. The melanogenic trigger is associated with high MITF levels along with rapid uptake of glucose. The transition to pigmented state is accompanied by increased glucose channelisation to anabolic pathways that support melanosome biogenesis. SREBF1-mediated up-regulation of fatty acid synthesis results in a transient accumulation of lipid droplets and enhancement of fatty acids oxidation through mitochondrial respiration. While this heightened bioenergetic activity is important to sustain melanogenesis, it impairs mitochondria lately, shifting the metabolism towards glycolysis. This recovery phase is accompanied by activation of the NRF2 detoxication pathway. Finally, we show that inhibitors of lipid metabolism can resolve hyperpigmentary conditions in a guinea pig UV-tanning model. Our study reveals rewiring of the metabolic circuit during melanogenesis, and fatty acid metabolism as a potential therapeutic target in a variety of cutaneous diseases manifesting hyperpigmentary phenotype.

}, issn = {1544-9173}, doi = {10.1371/journal.pbio.3001634}, author = {Sultan, Farina and Basu, Reelina and Murthy, Divya and Kochar, Manisha and Attri, Kuldeep S. and Aggarwal, Ayush and Kumari, Pooja and Dnyane, Pooja and Tanwar, Jyoti and Motiani, Rajender K. and Singh, Archana and Gadgil, Chetan and Bhavesh, Neel Sarovar and Singh, Pankaj K. and Natarajan, Vivek T. and Gokhale, Rajesh S.} } @article {46711, title = {Tetrazoloquinoline-1,2,3-triazole derivatives as antimicrobial agents: synthesis, biological evaluation and molecular docking study}, journal = {Polycyclic Aromatic Compounds}, volume = {42}, year = {2022}, month = {SEP}, pages = {1920-1941}, type = {Article}, abstract = {

In search of new active molecules, a small focused library of tetrazoloquinoline-based 1,2,3-triazoles has been efficiently preparedviaclick chemistry approach. Several derivatives were found to be exhibiting promising antimicrobial and antioxidant activity characterized by their lower minimum inhibitory concentration values. All the synthesized compounds exhibited excellent antibacterial activity against Gram negative bacteriaE. coliandF. devoransand antifungal activity againstC. albicansandA. niger. Further, these compounds were tested for their antitubercular activity against dormantMTB H37Raand dormantM. bovis BCGusing XRMA assay protocol and showed no significant activity. Also, the synthesized compounds were found to have potential antioxidant activity with IC(50)range = 12.48-50.20 mu g/mL. Furthermore, to rationalize the observed biological activity data, the molecular docking study also been carried out against the active site of fungalC. albicansenzyme P450 cytochrome lanosterol 14 alpha-demethylase, which revealed a significant correlation between the binding score and biological activity for these compounds. The results of thein vitroandin silicostudy suggest that the triazole-incorporated tetrazoloquinolines may possess the ideal structural requirements for further development of novel therapeutic agents.

}, keywords = {1, 2, 3-Triazole, ADME prediction, Antimicrobial, Antioxidant, Docking study}, issn = {1040-6638}, doi = {10.1080/10406638.2020.1821229}, author = {Shaikh, Mubarak H. and Subhedar, Dnyaneshwar D. and Akolkar, Satish V. and Nagargoje, Amol A. and Khedkar, Vijay M. and Sarkar, Dhiman and Shingate, Bapurao B.} } @article {47894, title = {Thermal and crystallization behaviour of polyphenylene sulfide in engineering polymer blends with HDPE}, journal = {International Polymer Processing}, volume = {2}, year = {2022}, month = {FEB }, pages = {53-58}, type = {Article}, abstract = {

The thermal and crystallization behaviour of polyphenylene sulfide (PPS) in its blends with high density polyethylene (HDPE) is reported. Three grades of HDPE ranging in MFI from 0.4 to 52 were used in the investigation. The effect of composition and molecular weight of HDPE on the crystallization process and morphology of PPS in the blends has been investigated by the technique of Differential Scanning Calorimetry (DSC). In the blends, PPS crystallizes in presence of molten HDPE. It is observed that the morphology of PPS in terms of crystallite size and crystallite size distribution in the blends is significantly affected by blending with HDPE. The temperature onset of melting was found to increase with increasing HDPE content and the melting peak width was found to decrease with increasing HDPE content. This indicates a larger crystallite size and a narrower crystallite size distribution of PPS in blends. The effect is more pronounced in HDPE-rich compositions. The extent of the variation in the temperature onset of melting and peak width were comparable for all the grades of HDPE. The degree of crystallinity of PPS in the blends is reduced significantly (55-70\%) in HDPE-rich blends. Therefore, it is concluded that the crystallization of PPS is affected by the presence of HDPE melt. The crystallization scans of PPS in the blends, obtained in the cooling mode, did not show any evidence of accelerated nucleation. On the other hand, a marginal reduction in the temperature onset of crystallization was observed. The temperature range of crystallization of PPS in the blends was found to be less for all compositions except for 90/10 (PPS/HDPE). In summary it is concluded that blending of HDPE with PPS influences the crystal growth of PPS significantly although the effect on its homogeneous nucleation is also considerable. As a result, the morphology of PPS crystallized in blends is different from that of the homopolymer. The changes in the morphology of PPS are not sensitive to the molecular weight of HDPE probably because of the high temperature of PPS crystallization relative to the melting point of HDPE.

}, issn = {0930-777X}, doi = {10.1515/ipp-1987-0019}, author = {Nadkarni, V. M. and Shingankuli, V. L. and Jog, J. P.} } @article {47771, title = {Thermodynamics and its correlation with dynamics in a mean-field model and pinned systems: a comparative study using two different methods of entropy calculation}, journal = {Journal of Chemical Physics}, volume = {156}, year = {2022}, month = {JAN }, pages = {014503}, type = {Article}, abstract = {A recent study introduced a novel mean-field model system where each particle over and above the interaction with its regular neighbors interacts with k extra pseudo-neighbors. Here, we present an extensive study of thermodynamics and its correlation with the dynamics of this system. We surprisingly find that the well-known thermodynamic integration (TI) method of calculating the entropy provides unphysical results. It predicts vanishing of the configurational entropy at temperatures close to the onset temperature of the system and negative values of the configurational entropy at lower temperatures. Interestingly, well below the temperature at which the configurational entropy vanishes, both the collective and the single-particle dynamics of the system show complete relaxation. Negative values of the configurational entropy are unphysical, and complete relaxation when the configurational entropy is zero violates the prediction of the random first-order transition theory (RFOT). However, the entropy calculated using the two-phase thermodynamics (2PT) method remains positive at all temperatures for which we can equilibrate the system, and its values are consistent with RFOT predictions. We find that with an increase in k, the difference in the entropy computed using the two methods increases. A similar effect is also observed for a system where a randomly selected fraction of the particles are pinned in their positions in the equilibrated liquid. We show that the difference in entropy calculated via the 2PT and TI methods increases with pinning density.}, issn = {0021-9606}, doi = {10.1063/5.0065668}, author = {Nandi, Ujjwal Kumar and Patel, Palak and Moid, Mohd and Nandi, Manoj Kumar and Sengupta, Shiladitya and Karmakar, Smarajit and Maiti, Prabal K. and Dasgupta, Chandan and Bhattacharyya, Sarika Maitra} } @article {48035, title = {Toxicity and preventive approaches of Fusarium derived mycotoxins using lactic acid bacteria: state of the art}, journal = {Biotechnology Letters}, volume = {44}, year = {2022}, month = {OCT}, pages = {1111-1126}, type = {Review}, abstract = {

Mycotoxin contamination of food and feed is a serious food safety issue and causes acute and chronic diseases in humans and livestock. Climatic and agronomic changes helps in the proliferation of fungal growth and mycotoxin production in food commodities. Mycotoxin contamination has attracted global attention due to its wide range of toxicity to humans and animals. However, physical and chemical management approaches in practice are unsafe for well-being due to their health-hazardous nature. Various antibiotics and preservatives are in use to reduce the microbial load and improve the shelf life of food products. In addition, the use of antibiotic growth promotors in livestock production may increase the risk of antimicrobial resistance, which is a global health concern. Due to their many uses, probiotics are helpful microbes that have a significant impact on food and nutrition. Furthermore, the probiotic potential of lactic acid bacteria (LAB) is employed in various food and feed preparations to neutralize mycotoxins, antimicrobial activities, balance the gut microbiome, and various immunomodulatory activities in both humans and livestock. In addition, LAB produces various antimicrobials, flavouring agents, peptides, and proteins linked to various food and health care applications. The LAB-based processes for mycotoxin management are more effective, eco-friendly, and low-cost than physical and chemical approaches. The toxicity, novel preventive measures, binding nature, and molecular mechanisms of mycotoxins{\textquoteright} detoxification using LAB have been highlighted in this review.

}, keywords = {Food safety, Fusarium species, Lactic acid bacteria, management, Mycotoxin}, issn = {0141-5492}, doi = {10.1007/s10529-022-03293-4}, author = {Navale, Vishwambar D. and Vamkudoth, Koteswara Rao} } @article {48181, title = {Tuning the hybridization and charge polarization in metal nanoparticles dispersed over Schiff base functionalized SBA-15 enhances CO2 capture and conversion to formic acid}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {SEP}, pages = {18354-18362}, type = {Article}, abstract = {

Different Schiff base functionalized SBA-15 materials were synthesized through condensation reactions between 3-aminopropyltriethoxysilane (APTES) and different aldehydes (glutaraldehyde and butyraldehyde) over a mesoporous silica, SBA-15 (APTES-GLU/SBA-15 and APTES-BUT/SBA-15). Both static and dynamic experiments have been used for testing the CO2 capture efficiency of these materials. The hybridization of the N atom in APTES has been tuned from sp(3) to sp(2) upon condensation facilitating optimum CO2 capture in the direct synthesis of APTES-GLU/SBA-15. The undesirable oxides of nitrogen have been removed during the synthesis process to improve the CO2 capture efficiency. These materials were employed as supports for Pd-Ag and Pd-Ni bimetallic systems for the selective conversion of the captured CO2 to formic acid (FA) in 0.5 M KHCO3 solution. The Pd-Ni catalyst system exhibited enhanced CO2 to FA conversion activity compared to other heterogeneous systems, which is similar to 4 times better than that of the Pd-Ag system in this study. The X-ray absorption studies over the catalyst material confirmed that the relatively electron-deficient Ni in Pd-Ni compared to Ag in Pd-Ag favoured higher charge polarization between the metals in the Pd-Ni system enhancing the CO2 to FA conversion. The experimental observations are well supported by the DFT calculations.

}, issn = {2050-7488}, doi = {10.1039/d2ta03690h}, author = {Cherevotan, Arjun and Ray, Bitan and Yadav, Anish and Bagchi, Debabrata and Singh, Ashutosh Kumar and Riyaz, Mohd and Churipard, Sathyapal R. and Naral, Vinay and Kaur, Komalpreet and Gautam, Ujjal K. and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {47040, title = {Two antibacterial spiro compounds from the roots of Artemisia pallens wall: evidence from molecular docking}, journal = {Natural Product Research}, volume = {36}, year = {2022}, month = {MAY}, pages = {2465-2472}, type = {Article}, abstract = {

Bioassay-guided isolation from acetone extract of the roots of Artemisia pallens Wall yielded two spiro compounds (1 and 2). The structures of these compounds were determined on the basis of spectroscopic techniques such as IR, MS, 1 D and 2 D- NMR. The acetone extract, fractions and the isolated two compounds were investigated for their antibacterial activity against two gram negative (E. coli, P. aeruginosa) and two gram positive (S. aureus, B. subtilis) bacterial strains. Compound (2) showed the best spectra of activity with IC50 and MIC values between 2.48-3.08 and 12.78 - 21.77 mu M and Compound (1) with 2.57-3.69 and 38.17 - 80.57 mu M, respectively, for the four bacterial strains, whereas inactive against Mycobacterium tuberculosis. Molecular docking study could further help in understanding the various interactions between these compounds and DNA gyrase active site in detail and thereby could provide valuable insight into the mechanism of action.

}, keywords = {antibacterial activity, antimycobacterial activity, Artemisia pallens, Asteraceae, Molecular docking, spiro compound}, issn = {1478-6419}, doi = {10.1080/14786419.2021.1902325}, author = {Honmore, Varsha S. and Natu, Arun D. and Khedkar, Vijay M. and Arkile, Manisha A. and Sarkar, Dhiman and Rojatkar, Supada R.} } @article {48413, title = {Ultrahigh capacitance of NiCo2O4/CeO2 mixed metal oxide material for supercapacitor applications}, journal = {Journal of Alloys and Compounds}, volume = {899}, year = {2022}, month = {APR}, pages = {163312}, type = {Article}, abstract = {

Pertaining to research on energy consumption and energy storage systems, new and efficient mixed metal oxides of NiCo2O4/CeO2 as pseudo-capacitor materials have been successfully prepared by sol-gel combustion method. The synthesized unique spinel nanomaterials have been analyzed for structural and morphological characterization by FT-IR, XRD, XPS and electron microscopy techniques. The mesoporous structure and large specific surface area of the synthesized nanomaterials provide an easy channel for ion mobility rendering an effortless redox process at the electrode electrolyte interface. As a consequence, it is observed that NiCo2O4 mixed with 10\% of CeO2 exhibits an excellent specific capacitance of 1355 Fg(-1) at 5 Ag-1 along with a high cycling stability with only 4.7\% capacity loss at the end of 6000 cycles at a charge-discharge current density of 10 Ag-1. The results obtained are in par with some of the recent electrode materials used for supercapacitors suggesting the possible employment of NiCo2O4/CeO2 mixed metal oxides in energy storage applications. (C) 2021 Elsevier B.V. All rights reserved.

}, keywords = {Charge-discharge, cyclic voltammetry, NiCo2O4/CeO2, specific capacitance, supercapacitor}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2021.163312}, author = {Santhosh, G. and Nayaka, G. P. and Bhatt, Aarti S.} } @article {48212, title = {Ultra-high performance liquid chromatography Q-Orbitrap MS/MS-based profiling and quantification of limonoids in Meliaceae plants}, journal = {Analytical and Bioanalytical Chemistry}, volume = {414}, year = {2022}, month = {AUG}, pages = {6093-6106}, type = {Article}, abstract = {

Meliaceae plants have been extensively used in agriculture, folklore, and traditional medicine. They are the major storehouses for structurally diverse limonoids (meliacins) possessing various bioactivities like antifeedant, insecticidal, antimicrobial, etc. However accurate detection of these tetranortriterpenes from the vast pool of metabolites in plant tissue extracts or biological sample is a crucial challenge. Though the mass spectrum (MS) provides the molecular mass and the corresponding elemental composition, it cannot be relied precisely. The exact identification of a specific metabolite demands the MS/MS spectrum containing the signature product ions. In the present study, we have developed the UHPLC Q-Orbitrap-based method for identification, quantification, and characterization of limonoids in different plant tissue extracts requiring minimum plant material. Using this method, we carried out the limonoid profiling in different tissue extracts of sixteen Meliaceae plants and the identification of limonoids was performed by comparing the retention time (RT), ESI-(+)-MS spectrum, and HCD-MS/MS of the purified fifteen limonoids used as reference standards. Our results revealed that early intermediates of the limonoid biosynthetic pathway such as azadiradione, epoxyazadiradione, and gedunin occurred more commonly in Meliaceae plants. The MS/MS spectrum library of the fifteen limonoids generated in this study can be utilized for identification of these limonoids in other plant tissue extracts, botanical fertilizers, agrochemical formulations, and bio pesticides.

}, keywords = {LC-HRMS, LC-MS/MS, Limonoids, Meliaceae, Natural product, Quantification}, issn = {1618-2642}, doi = {10.1007/s00216-022-04169-2}, author = {Mulani, Fayaj A. and Nandikol, Sharvani S. and Kajjihundi, Jagadeesh S. and Pathappa, Niranjana and Puttappa, Sharanappa and Thulasiram, V. Hirekodathakallu} } @article {48199, title = {Understanding the effect of sodium polyphosphate on improving the chemical stability of Ti3C2Tz MXene in water}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {OCT }, pages = {22016-22024}, type = {Article}, abstract = {

Degradation of MXenes in aqueous environments severely limits the application and industrialization of this large family of two-dimensional (2D) materials. Hydrolysis and oxidation are now considered as two main degradation mechanisms and while significant efforts have been directed to prolonging the shelf-life of MXenes, separating and studying their degradation mechanisms have lagged behind. Herein, gas analysis via gas chromatography and Raman spectroscopy were used to investigate the effect of sodium polyphosphate, PP, on the degradation of Ti3C2Tz MXene. Transmission and scanning electron microscopies, as well as X-ray photoelectron spectroscopywere also used as complimentary techniques to support conclusions derived from gas analysis and to confirm the extent of degradation via characterization of solid reaction products. Based on these studies we have determined that the addition of PP to an equal mass of Ti3C2Tz solution can effectively suppress hydrolysis and protect Ti3C2Tz from degradation.

}, issn = {2050-7488}, doi = {10.1039/d2ta04009c}, author = {Huang, Shuohan and Natu, Varun and Tao, Jingyi and Xia, Yumin and Mochalin, Vadym N. and Barsoum, Michel W.} } @article {48011, title = {Understanding unfolding and refolding of the antibody fragments (Fab). II. Mapping intra and inter-chain disulfide bonds using mass spectrometry}, journal = {Biochemical Engineering Journal}, volume = {182}, year = {2022}, month = {MAY}, pages = {108439}, type = {Article}, abstract = {

Disulfide bond formation in recombinant protein therapeutics has a significant impact on the integrity and biological activity of the drug product. Formation of the disulfide linkage is the key rate-limiting step in in vitro refolding and overall manufacturing of the antibody fragments (Fab). This investigation is focused on mapping the intra, and inter-chain disulfide bonds in the in vitro refolded antibody fragments by using mass spectrometry (MS). Biosimilar rHu Ranibizumab and rHu Certolizumab expressed using E. coli were selected for the study. Both Fabs contain ten cysteine residues leading to two intra-chain disulfide bonds on each subunit and a single interchain disulfide linkage. rHu Certolizumab has an additional cysteine which is unpaired and used for pegylation. The amino acid sequence in the disulfide-bonded peptides was confirmed by Collision-induced dissociation (CID), Electron transfer dissociation (ETD) and High-energy collision dissociation (HCD). The light chain (LC) intra-chain disulfide is formed between Cys23-Cys88 and Cys134-Cys194 in both the Fabs. The heavy chain (HC) intra-chain disulfides are formed between Cys22-Cys96 and Cys150-Cys206 in rHu Ranibizumab. LC and HC subunits of rHu Ranibizumab are covalently linked by disulfide linkage formed between Cys214 of LC and Cys226 of HC. This study suggests that information from multiple MS platforms and orthogonal methods for peptide fragmentation can be effectively used to map disulfide linkages in biosimilar therapeutic proteins.

}, keywords = {Antibody fragments (Fab), Collision-induced dissociation, Electron transfer dissociation, High-energy collision dissociation, in vitro refolding, Ranibizumab}, issn = {1369-703X}, doi = {10.1016/j.bej.2022.108439}, author = {Nainwal, Neeraj and Chirmade, Tejas and Gani, Kayanat and Rana, Sunil and Bhambure, Rahul} } @article {48416, title = {Viscoelastic covalent organic nanotube fabric via macroscopic entanglement}, journal = {Journal of the American Chemical Society}, volume = {144}, year = {2022}, month = {SEP }, pages = {16052-16059}, type = {Article}, abstract = {

Covalent organic nanotubes (CONTs) are one-dimensional porous frameworks constructed from organic building blocks via dynamic covalent chemistry. CONTs are synthesized as insoluble powder that restricts their potential applications. The judicious selection of 2,2{\textquoteright}-bipyridine-5,5{\textquoteright}-dicarbaldehyde and tetraaminotriptycene as building blocks for TAT-BPy CONTs has led to constructing flexible yet robust and self-standing fabric up to 3 mu m thickness. The TAT-BPy CONTs and TAT-BPy CONT fabric have been characterized by solid-state one-dimensional (1D) C-13 CP-MAS, two-dimensional (2D) C-13-H-1 correlation NMR, 2D H-1-H-1 DQ-SQ NMR, and 2D N-14-H-1 correlation NMR spectroscopy. The mechanism of fabric formation has been established by using high-resolution transmission electron microscopy and scanning electron microscopy techniques. The as-synthesized viscoelastic TAT-BPy CONT fabric exhibits high mechanical strength with a reduced modulus (E-r) of 8 (+/- 3) GPa and hardness (H) of 0.6 (+/- 0.3) GPa. Interestingly, the viscoelastic fabric shows time-dependent elastic depth recovery up to 50-70\%.

}, issn = {0002-7863}, doi = {10.1021/jacs.2c06133}, author = {Koner, Kalipada and Das, Susobhan and Mohata, Shibani and Duong, Nghia Tuan and Nishiyama, Yusuke and Kandambeth, Sharath and Karak, Suvendu and Reddy, C. Malla and Banerjee, Rahul} } @article {48436, title = {Viscoelastic liquid from regenerated silk fibroin in the silk i conformation: a writeable and shapeable material}, journal = {ACS Applied Polymer Materials}, volume = {4}, year = {2022}, month = {JUN}, pages = {4699{\textendash}4708}, type = {Article}, abstract = {

Regenerated silk fibroin (RSF) has acquired enormous attention because of its exceptional toughness, strength, and biocompatible nature. These properties make RSF a potential candidate for the fabrication of different types of materials. However, processing even a dilute aqueous solution of RSF leads to a conformational transformation from a random coil/helix-rich (silk I) to a beta-sheetrich (silk II) state. As a consequence, RSF tends to form aggregates and loses its toughness. Working in a direction to address this problem, an aqueous solution of regenerated silk fibroin has been modified with a dual layer of polyethylenimine (PEI) and a PEG-based polymer surfactant (PS). Upon freeze-drying, the RSF-polymer complex forms a solvent-free RSF bioconjugate system and exhibits a soft solid to liquid melting transition at similar to 45 degrees C. The sequential modification with PEI and PS preserves the native-like random coil conformation of RSF up to at least 8 months of storage by not allowing interchain interactions that can lead to aggregation. Rheological and small-angle X-ray scattering measurements show that the solvent-free system is viscoelastic and exhibits a higher order microstructure mediated by the packing of the PS chains, respectively. Temperature-dependent soft solid-liquid-like dual behavior offers applications in injection-based writing, compression molding, and shaping RSF bioconjugates into various types of geometries. Furthermore, the mechanical properties of the RSF bioconjugate system can be modulated by crosslinking with glutaraldehyde vapor at 50 degrees C.

}, keywords = {RSF liquid, RSF soft solid, silk I conformation, silk liquid, viscoelastic}, issn = {2637-6105}, doi = {10.1021/acsapm.2c00290}, author = {Kumar, Raj and Joseph, Emmanuel and Chaudhari, Atul and Nisal, Anuya and Sharma, Kamendra P.} } @article {48335, title = {2D layered nanomaterials as fillers in polymer composite electrolytes for lithium batteries}, journal = {Advanced Energy Materials}, volume = {13}, year = {2023}, month = {APR}, type = {Review}, abstract = {

Polymer composite electrolytes (PCEs), i.e., materials combining the disciplines of polymer chemistry, inorganic chemistry, and electrochemistry, have received tremendous attention within academia and industry for lithium-based battery applications. While PCEs often comprise 3D micro- or nanoparticles, this review thoroughly summarizes the prospects of 2D layered inorganic, organic, and hybrid nanomaterials as active (ion conductive) or passive (nonion conductive) fillers in PCEs. The synthetic inorganic nanofillers covered here include graphene oxide, boron nitride, transition metal chalcogenides, phosphorene, and MXenes. Furthermore, the use of naturally occurring 2D layered clay minerals, such as layered double hydroxides and silicates, in PCEs is also thoroughly detailed considering their impact on battery cell performance. Despite the dominance of 2D layered inorganic materials, their organic and hybrid counterparts, such as 2D covalent organic frameworks and 2D metal-organic frameworks are also identified as tuneable nanofillers for use in PCE. Hence, this review gives an overview of the plethora of options available for the selective development of both the 2D layered nanofillers and resulting PCEs, which can revolutionize the field of polymer-based solid-state electrolytes and their implementation in lithium and post-lithium batteries.

}, keywords = {2D materials, clay minerals, covalent organic frameworks, metal-organic frameworks, MXene, polymer composite electrolyte, solid-state batteries}, issn = {1614-6832}, doi = {10.1002/aenm.202203326}, author = {Vijayakumar, Vidyanand and Ghosh, Meena and Asokan, Kiran and Sukumaran, Santhosh Babu and Kurungot, Sreekumar and Mindemark, Jonas and Brandell, Daniel and Winter, Martin and Nair, Jijeesh Ravi} } @article {48827, title = {3D-printed polymer composite devices based on a ferroelectric chiral ammonium salt for high-performance piezoelectric energy harvesting}, journal = {Materials Horizons}, volume = {10}, year = {2023}, month = {JUL}, pages = {3153-3161}, type = {Article}, abstract = {

Three-dimensional printing (3DP) is an emerging technology to fabricate complex architectures, necessary to realize state-of-the-art flexible and wearable electronic devices. In this regard, top-performing devices containing organic ferro- and piezoelectric compounds are desired to circumvent significant shortcomings of conventional piezoceramics, e.g. toxicity and high-temperature device processibility. Herein, we report on a 3D-printed composite of a chiral ferroelectric organic salt {[Me3CCH(Me)NH3][BF4]} (1) with a biodegradable polycaprolactone (PCL) polymer that serves as a highly efficient piezoelectric nanogenerator (PENG). The ferroelectric property of 1 originates from its polar tetragonal space group P4(2), verified by P-E loop measurements. The ferroelectric domain characteristics of 1 were further probed by piezoresponse force microscopy (PFM), which gave characteristic {\textquoteleft}butterfly{\textquoteright} and hysteresis loops. The PFM amplitude vs. drive voltage measurements gave a relatively high magnitude of the converse piezoelectric coefficient for 1. PCL polymer composites with various weight percentages (wt\%) of 1 were prepared and subjected to piezoelectric energy harvesting tests, which gave a maximum open-circuit voltage of 36.2 V and a power density of 48.1 mu W cm(-2) for the 10 wt\% 1-PCL champion device. Furthermore, a gyroid-shaped 3D-printed 10 wt\% 1-PCL composite was fabricated to test its practical utility, which gave an excellent output voltage of 41 V and a power density of 56.8 mu W cm(-2). These studies promise the potential of simple organic compounds for building PENG devices using advanced manufacturing technologies.

}, issn = {2051-6347}, doi = {10.1039/d3mh00444a}, author = {Sahoo, Supriya and Kothavade, Premkumar Anil and Naphade, Dipti R. and Torris, Arun and Praveenkumar, Balu and Zareba, Jan K. and Anthopoulos, Thomas D. and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} } @article {48766, title = {Atomically dispersed manganese on graphene nanosheets as biocompatible nanozyme for glutathione detection in liver tissue lysate using microfluidic paper-based analytical devices}, journal = {ACS Applied Materials \& Interfaces}, volume = {15}, year = {2023}, month = {OCT }, pages = {47902-47920}, type = {Article}, abstract = {

Recently, single atom catalysts (SACs) featuring M-N-x (M = metal) active sites on carbon support have drawn considerable attention due to their promising enzyme-like catalytic properties. However, typical synthesis methods of SACs often involve energy-intensive carbonization processes. Herein, we report a facile one-pot, low-temperature, wet impregnation method to fully utilize M-N-4 sites of manganese phthalocyanine (MnPc) by decorating molecular MnPc over the sheets of graphene nanoplatelets (GNP). The synthesized MnPc@GNP exhibits remarkable peroxidase-mimic catalytic activity toward the oxidation of chromogenic 3,3 {\textquoteleft},5,5({\textquoteright})-tetramethylbenzidine (TMB) substrate owing to the efficient utilization of atomically dispersed Mn and the high surface-to-volume ratio of the porous catalyst. A nanozyme-based colorimetric sensing probe is developed to detect important biomarker glutathione (GSH) within only 5 min in solution phase based on the ability of GSH to effectively inhibit the TMB oxidation. The high sensitivity and selectivity of the developed colorimetric assay enable us to quantitatively determine GSH concentration in different biological fluids. This work, for the first time, reports a rapid MnPc@GNP nanozyme-based colorimetric assay in the solid substrate by fabricating microfluidic paper-based analytical devices (mu PADs). GSH is successfully detected on the fabricated mu PADs coated with only 6.0 mu g of nanozyme containing 1.6 nmol of Mn in the linear range of 0.5-10 mu M with a limit of detection of 1.23 mu M. This work also demonstrates the quantitative detection of GSH in mice liver tissue lysate using mu PADs, which paves the way to develop mu PADs for point-of-care testing.

}, keywords = {colorimetricsensing, Glutathione, mu PADs, nanozyme, single atom catalyst, tissue lysate}, issn = {1944-8244}, doi = {10.1021/acsami.3c08762}, author = {Baruah, Diksha J. and Thakur, Ashutosh and Roy, Esha and Roy, Kallol and Basak, Sumanjita and Neog, Dipankar and Bora, Himangsu K. and Konwar, Rituraj and Chaturvedi, Vikash and Shelke, Manjusha V. and Das, Manash R.} } @article {48807, title = {Automated myocardial infarction and angina detection using second derivative of photoplethysmography}, journal = {Physical and Engineering Sciences in Medicine}, volume = {46}, year = {2023}, month = {SEP}, pages = {1259-1269}, type = {Article}, abstract = {

Photoplethysmography (PPG) based healthcare devices have gained enormous interest in the detection of cardiac abnormalities. Limited research has been implemented for myocardial infarction (MI) detection. Moreover, PPG-based detection of angina is still a research gap. PPG signals are not always informative. Therefore, this research work presents the use of PPG signals and their second derivative to evaluate myocardial infarction and angina using a novel set of morphological features. The obtained morphological features are fed onto the feed-forward artificial neural network for the identification of the type of MI and unstable angina (UA). The initial experiments have been carried out on non-ambulatory (public) subjects for feature extraction and later evaluated on ambulatory (self-generated) databases. The intended method attains accuracy, sensitivity, and specificity of 98\%, 97\%, 98\% on the public database and 94\%, 94\%, 94\% on the self-generated database. The result shows that the proposed set of features can detect MI and UA with significant accuracy.

}, keywords = {Artificial neural network, Myocardial infarction detection, PPG, SDPPG, Unstable angina detection}, issn = {2662-4729}, doi = {10.1007/s13246-023-01293-w}, author = {Neha, H. K. and Sardana, H. K. and Dahiya, N. and Dogra, N. and Kanawade, R. and Sharma, Y. P. and Kumar, S.} } @article {48704, title = {Baby step in assembling and integrating the components of an artificial photosynthesis device with forced heterojunctions towards improved efficiency}, journal = {Journal of Materials Chemistry A}, volume = {11}, year = {2023}, month = {JUL }, pages = {15168-15182}, type = {Article}, abstract = {

How to achieve unassisted, economical, scalable, and sustainable artificial photosynthesis for liquid fuels/products with improved solar-to-fuel efficiency (STFE) to address a carbon-neutral economy remains a big question. To a large degree, the extent of charge separation at heterojunction interfaces and charge utilization determine the STFE. Towards this, BiVO3 is assembled from ionic-precursors into TiO2 pores, and integrated structurally and electronically with TiO2 on calcination as BiVO4 quantum dots (BVQDs). BVQDs in TiO2 (BVT) pores lead to an all-inorganic system with a sub-quadrillion number of heterojunctions in a 1 cm(2) device (contains similar to 25 mu g of BiVO4 (similar to 2.5 wt\%) in the nanopores of similar to 975 mu g of TiO2 (similar to 97.5 wt\%)) and facilitate artificial photosynthesis. We demonstrate 31-38\% STFE with a photon to chemical conversion turn over frequency (ToF(P2C)) of 2.73 s(-1) with a 1 cm(2) wireless BiVO4-TiO2 artificial leaf (BVT-AL) device for HCHO and CH3OH. The sequential nature of CO2 reduction to HCHO and then to CH3OH is evident from the reaction results. (CO2)-C-13 isotopic labeling experiments confirm that the input CO2 is the source for product formation. A large increase in the photocurrent density and incident photon-to-current efficiency (IPCE) of BVT, over 100\% for the BiVO4 photoanode in visible light, demonstrates and supports efficient visible light absorption, charge separation and migration to the redox sites. A device has been demonstrated to show sustainable activity in direct sunlight, and addresses scalability from 1 to 9 cm(2). Assuming no change (50\% decrease) in the STFE, a 6.74 m(2) device is expected to convert 1 (0.5) kg h(-1) CO2 into C1-oxygenates in sunlight. DFT calculations carried out with anatase TiO2 (101) and BiVO4 (121) interfaces support many of the experimental findings, including electron flow from the latter to the former, and interaction of the oxygen of TiO2 with BiVO4 and vice versa at the interface towards forced heterojunctions.

}, issn = {2050-7488}, doi = {10.1039/d3ta01850d}, author = {Salgaonkar, Kranti N. and Bajpai, Himanshu and Mhamane, Nitin B. and Nalajala, Naresh and Chauhan, Inderjeet and Thakkar, Kavita and Joshi, Kavita and Gopinath, Chinnakonda S.} } @article {48473, title = {Bacterial communities and diversity of western ghats soil: a study of a biodiversity hotspot}, journal = {Current Microbiology}, volume = {80}, year = {2023}, month = {APR}, pages = {108}, type = {Article}, abstract = {

The Western Ghats is one of India{\textquoteright}s mega-diversity hotspots and an ecologically and geologically important area for the diversity of endemic plants and animals. The present study provides insights into the aerobic bacterial diversity and composition of the soils of North Western Ghats located in Maharashtra state (NWGM), India. The samples for the culture-dependent study were collected from 6 different locations namely Malshej Ghat, Bhimashankar, Lonavala, Mulshi, Tail-Baila, and Mahabaleshwar. A total of 173 isolates were obtained from the different samples, which belonged to Proteobacteria (43\%), Firmicutes (36\%), and Actinobacteria (19\%). Sequences of 15 strains shared \<= 98.7\% similarity (a species cut-off) which represent potential novel species. Metagenomic analysis revealed the presence of Actinobacteria and Proteobacteria as the most dominant phyla at both MB and MG. However, both sites showed variation in the composition of rare phyla and other dominant phyla. This difference in bacterial community composition could be due to differences in altitude or other physicochemical properties. The functional prediction from the amplicon sequencing showed the abundance of carbohydrate, protein, and lipid metabolism which was corroborated by screening the isolated bacterial strains for the same. The present study has a unique take on microbial diversity and defines the importance of community assembly processes such as drift, dispersal, and selection. Such processes are relatively important in controlling community diversity, distribution, as well as succession. This study has shown that the microbial community of NWGM is a rich source of polysaccharide degrading bacteria having biotechnological potential.

}, issn = {0343-8651}, doi = {10.1007/s00284-023-03207-1}, author = {Ghare, Uma and Narvekar, Simran and Lodha, Tushar and Mallebhari, Rubiya and Dastager, Syed and Barvkar, Vitthal T. and Dhotre, Dhiraj and Karmalkar, Nitin R. and Pable, Anupama A.} } @article {48336, title = {Carbon black and chitin nanofibers for green tyres: preparation and property evaluation}, journal = {Carbohydrate Polymers}, volume = {310}, year = {2023}, month = {JUN}, pages = {120700}, type = {Article}, abstract = {

This research highlights the synergistic use of carbon black (CB) and chitin nanofibers (CHNFs) for developing green tyres for the first time. The CHNFs (12-30 nm) were prepared from chitin powder with the help of steam explosion and mild oxalic acid hydrolysis. The CHNFs were uniformly dispersed in natural rubber (NR) latex, dried, and mixed with CB in a two-roll mill to form NR/CB/CHNF composites. The NR/CB/CHNF composite at 1 phr CHNF loading exhibited tensile and tear strengths that were about 47 and 160 \% greater than the NR-Neat, respectively. The dynamic mechanical analysis showed that the loss tangent (tan delta) at 60 degrees C was 50 \% lower for the NR/CB/CHNF 1.0 composite than for the NR/CB50 composite. The study succeeded in developing a new green tyre tread formulation that would be helpful for attaining sustainability and a circular economy.

}, keywords = {carbon black, Chitin nanofibers, Green Tyre, natural rubber latex}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2023.120700}, author = {Mathew, Mariya and Dominic, C. D. Midhun and Neenu, K. V. and Begum, P. M. Sabura and Dileep, P. and Kumar, T. G. Ajith and Sabu, Akshay Alax and Nagane, Dhiraj and Parameswaranpillai, Jyotishkumar and Badawi, Michael} } @article {48818, title = {Chemical bridge-mediated heterojunction electron transport layers enable efficient and stable perovskite solar cells}, journal = {ACS Applied Materials and Interfaces}, volume = {15}, year = {2023}, month = {JUN}, pages = {29597-29608}, type = {Article}, abstract = {

Perovskite solar cells (PSCs) emerged as potential photovoltaicenergy-generating devices developing in recent years because of theirexcellent photovoltaic properties and ease of processing. However,PSCs are still reporting efficiencies much lower than their theoreticallimits owing to various losses caused by the charge transport layerand the perovskite. In this regard, herein, an interface engineeringstrategy using functional molecules and chemical bridges was appliedto reduce the loss of the heterojunction electron transport layer.As a functional interface layer, ethylenediaminetetraacetic acid (EDTA)was introduced between PCBM and the ZnO layer, and as a result, EDTAsimultaneously formed chemical bonds with PCBM and ZnO to serve asa chemical bridge connecting the two. DFT and chemical analyses revealedthat EDTA can act as a chemical bridge between PCBM and ZnO, passivatedefect sites, and improve charge transfer. Optoelectrical analysisproved that EDTA chemical bridge-mediated charge transfer (CBM-CT)provides more efficient interfacial charge transport by reducing trap-assistedrecombination losses at ETL interfaces, thereby improving device performance.The PSC with EDTA chemical bridge-mediated heterojunction ETL exhibiteda high PCE of 21.21\%, almost no hysteresis, and excellent stabilityto both air and light.

}, keywords = {charge transfer, chemical bridge, electron transport layer, ethylenediaminetetraacetic acid, Perovskite solar cells, trap-assisted recombination}, issn = {1944-8244}, doi = {10.1021/acsami.3c04852}, author = {Patil, Pramila and Maibam, Ashakiran and Sangale, Sushil S. and Mann, Dilpreet Singh and Lee, Hyun-Jung and Krishnamurty, Sailaja and Kwon, Sung-Nam and Na, Seok-In} } @article {48812, title = {Cocrystallization of multi-kinase inhibitor pazopanib with fenamic acids: improving dissolution and inhibiting cell migration}, journal = {CrystEngComm}, volume = {25}, year = {2023}, month = {OCT }, pages = {5565-5574}, type = {Article}, abstract = {

A multi-kinase inhibitor, pazopanib (PAZ) is cocrystallized with cyclooxygenase (COX) inhibitor fenamic acids to investigate the dissolution rate and inhibition of cell migration in VEGF-triggered HUVEC cells to test the efficacy of stoichiometric drug-drug combinations. Crystallization experiments at the sub-milligram level in an acetonitrile-methanol mixture yielded two drug-drug salt forms of PAZ with flufenamic acid (FFA) and niflumic acid (NFA) as PAZ+center dot FFA-center dot ACN (an acetonitrile solvate named as form I) and PAZ+center dot NFA-. Structures of the crystal forms were characterized by single crystal X-ray diffraction (SC-XRD) method. Crystal structures revealed that the presence of a 2-aminopyrimidine group in PAZ is a strong partner for the carboxyl group in all solid forms, forming an acidMIDLINE HORIZONTAL ELLIPSISpyrimidine heterosynthon with COX inhibitor fenamic acids. To perform dissolution experiments and cell line analysis, the scale-up of both salt forms were done in the acetonitrile-methanol mixture through crystallization, which showed a polymorphic transformation in the case of PAZ+center dot FFA-center dot ACN (an acetonitrile solvate named form II). The thermodynamic stability of PAZ+center dot FFA-center dot ACN (form II) and PAZ+center dot NFA- were analysed using slurry experiment under ambient conditions in pH 1.2 (0.1 N HCl) buffer medium and the residual solid phase was characterized by powder XRD, which showed that PAZ+center dot FFA-center dot ACN (form II) was a metastable solid form while PAZ+center dot NFA- was a stable solid form. The dissolution experiments at gastric pH 1.2 showed that the rate of dissolution of PAZ+center dot FFA-center dot ACN was 10 times higher than PAZ+center dot NFA-. The cell migration assay suggested that PAZ+center dot FFA-center dot ACN inhibited similar to 25\% and PAZ+center dot NFA- inhibited similar to 20\% migration of HUVEC cells compared to PAZ alone. These investigations suggested that the drug-drug salts PAZ+center dot FFA- and PAZ+center dot NFA- would be potential combo drug candidates for clinical trials. Multi-drug crystalline salts of pazopanib with fenamic acids exhibit enhanced dissolution and 20\% higher inhibition in the migration of HUVEC cells compared to the reference drug.

}, doi = {10.1039/d3ce00773a}, author = {Rai, Sunil K. and Gunnam, Anilkumar and Roy, Debopriya and Rajput, Raveena and Kulkarni, Kiran and Nangia, Ashwini K.} } @article {48730, title = {Concise approach for the synthesis of the tetracyclic framework of Lycibarbarines A and B}, journal = {Tetrahedron Letters}, volume = {121}, year = {2023}, month = {MAY 17}, pages = {154493}, type = {Article}, abstract = {

A simple approach for the construction of the tetracyclic spiroketal skeleton of Lycibarbarine A and B has been described. Employing a solvent free condition for epoxide opening with tetrahydroquinoline as a key reaction to couple both the fragments, an oxidation followed by TBAF-mediated silyl deprotection spiroketalization establishes the complete tetracyclic core present in these natural products. (c) 2023 Elsevier Ltd. All rights reserved.

}, keywords = {Chiral pool approach, D -Glyceraldehyde, Tetracyclic spiroketal, Total synthesis}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2023.154493}, author = {Shet, Manoj N. and Nechooli, Hemanth K. and Ramana, Chepuri V.} } @article {48772, title = {Conversion of benzyl phenyl ether to monoaromatics in high-temperature aqueous ethanol solution under high-pressure carbon dioxide conditions}, journal = {New Journal of Chemistry}, volume = {47}, year = {2023}, month = {JUL}, pages = {12561-12569}, type = {Article}, abstract = {

Solvolysis of benzyl phenyl ether (BPE), which is a model compound of lignin ether linkage, was studied in an aqueous ethanol solution, which can be obtained from bioethanol, under high-pressure carbon dioxide conditions. A batch study revealed that BPE solvolysis to monoaromatics (benzyl ethyl ether (BEE), benzyl alcohol (BA), and phenol (Ph)) proceeded in aqueous ethanol solution over 523 K and the addition of high-pressure carbon dioxide enhanced the initial solvolysis rate and suppressed the side reaction (hydrogenolysis to toluene (TL)). The ethanol molar fraction (ethanol-water volume ratio) is the key factor for the solvolysis reaction, and the highest monoaromatic yield of 72.9\% (BEE 10.7\%, BA 19.3\%, Ph 37.9\%, and TL 5.1\%) was obtained in aqueous ethanol solution (2 cm(3) : 1 cm(3) = water:ethanol) at 598 K for 3 h under a pressure of 18 MPa of carbon dioxide. The solvolysis reaction proceeded continuously to produce monoaromatics with a flow system. A monoaromatic yield of 76.7\% (BEE 8.6\%, BA 19.7\%, Ph 39.6\%, and TL 8.9\%) was obtained, and the formation rates were 2.7 x 10(-4) mmol min(-1) for BEE, 6.2 x 10(-4) mmol min(-1) for BA, and 12.4 x 10(-4) mmol min(-1) for Ph at 598 K under flowing water (26 mmol min(-1)), ethanol solution (4.1 mmol min(-1)), carbon dioxide (1.2 mmol min(-1)), and BPE (15.6 x 10(-4) mmol min(-1)) under a total pressure of 40 MPa.

}, issn = {1144-0546}, doi = {10.1039/d3nj01773g}, author = {Taniguchi, Kenkichi and Kusumawati, Etty N. and Nanao, Hidetaka and Rode, Chandrashekhar V. and Sato, Osamu and Yamaguchi, Aritomo and Shirai, Masayuki} } @article {48825, title = {Dabrafenib-panobinostat salt: improving the dissolution rate and inhibition of BRAF melanoma cells}, journal = {ACS Omega}, volume = {8}, year = {2023}, month = {MAY }, pages = {18255-18265}, type = {Article}, abstract = {

Cocrystallization of the drug-drug salt-cocrystal of the histone deacetylase inhibitor (HDACi) panobinostat (PAN) and b-rapidly accelerated fibrosarcoma (BRAF) inhibitor dabrafenib (DBF) afforded single crystals of a two-drug salt stabilized by N+-H center dot center dot center dot O and N+-H center dot center dot center dot N- hydrogen bonds between the ionized panobinostat ammonium donor and dabrafenib sulfonamide anion acceptor in a 12-member ring motif. A faster dissolution rate for both drugs was achieved through the salt combination compared to the individual drugs in an aqueous acidic medium. The dissolution rate exhibited a peak concentration (Cmax) of approximately 310 mg cm-2 min-1 for PAN and 240 mg cm-2 min-1 for DBF at a Tmax of less than 20 min under gastric pH 1.2 (0.1 N HCl) compared to the pure drug dissolution values of 10 and 80 mg cm-2 min-1, respectively. The novel and fast-dissolving salt DBF-center dot PAN+ was analyzed in BRAFV600E melanoma cells Sk-Mel28. DBF-center dot PAN+ reduced the dose-response from micromolar to nanomolar concentrations and lowered IC50 (21.9 +/- 7.2 nM) by half compared to PAN alone (45.3 +/- 12.0 nM). The enhanced dissolution and lower survival rate of melanoma cells show the potential of novel DBF-center dot PAN+ salt in clinical evaluation.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c01881}, author = {Rai, Sunil K. and Marverti, Gaetano and Gunnam, Anilkumar and Allu, Suryanarayana and Nangia, Ashwini K.} } @article {48299, title = {D-A-D-based unsymmetrical thiosquaraine dye for the dye-sensitized solar cells(dagger)}, journal = {Photochemistry and Photobiology}, volume = {99}, year = {2023}, month = {MAR}, pages = {529-537}, type = {Article}, abstract = {

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, pi-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor-acceptor-donor-based unsymmetrical thiosquaraine sensitizer (SQ5S) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5. The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO2 and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51\% (V-OC 610 mV, J(SC) 3.07 mA cm(-2), ff 81\%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43\% (V-OC 723 mV, J(SC) 9.3 mA cm(-2), ff 80\%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.

}, issn = {0031-8655}, doi = {10.1111/php.13769}, author = {Jadhav, Avinash P. and Singh, Ambarish Kumar and Maibam, Ashakiran and Krishnamurty, Sailaja and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} } @article {48474, title = {Design and synthesis of piano-stool ruthenium(II) complexes and their studies on the inhibition of amyloid ? (1-42) peptide aggregation}, journal = {International Journal of Biological Macromolecules}, volume = {239}, year = {2023}, month = {JUN }, pages = {124197}, type = {Article}, abstract = {

Misfolding , protein aggregation have been linked to numerous human neurodegenerative disorders such as Alzheimer{\textquoteright}s, prion , Parkinson{\textquoteright}s diseases. Ruthenium (Ru) complexes have received considerable attention in studying protein aggregation due to their interesting photophysical and photo properties. In this study, we have synthesized the novel Ru complexes ([Ru(p-cymene)Cl(L-1)][PF6](Ru-1), and [Ru(p-cymene)Cl(L-2)][PF6](Ru-2)) and investigated their inhibitory activity against the bovine serum albumin (BSA) aggregation and the A beta 1-42 peptides amyloid formation. Several spectroscopic methods were used to characterize these complexes, and the molecular structure of the complex was determined by X-ray crystallography. Amyloid aggregation and inhi-bition activities were examined using the Thioflavin-T (ThT) assay, and the secondary structures of the protein were analyzed by circular dichroism (CD) spectroscopy and transmission electron microscopy (TEM). The cell viability assay was carried out on the neuroblastoma cell line, revealing that the complex Ru-2 showed better protective effects against A beta 1-42 peptide toxicity on neuro-2a cells than the complex Ru-1. Molecular docking studies elucidate the binding sites and interactions between the Ru-complexes and A beta 1-42 peptides. The exper-imental studies revealed that these complexes significantly inhibited the BSA aggregation and A beta 1-42 amyloid fibril formation at 1:3 and 1:1 molar concentrations, respectively. Antioxidant assays demonstrated that these complexes act as antioxidants, protecting from amyloid-induced oxidative stress. Molecular docking studies with the monomeric A beta 1-42 (PDB: 1IYT) show hydrophobic interaction, and both complexes bind preferably in the central region of the peptide and coordinate with two binding sites of the peptide. Hence, we suggest that the Ru-based complexes could be applied as a potential agent in metallopharmaceutical research against Alzheimer{\textquoteright}s disease.

}, keywords = {Aggregation, Amyloid ?(1-42) peptide, DFT computation, Fibrillization, Molecular docking, Ruthenium complexes}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.124197}, author = {Singh, Sain and Navale, Govinda R. and Agrawal, Sonia and Singh, Haobam Kisan and Singla, Labhini and Sarkar, Dhiman and Sarma, Manabendra and Choudhury, Anghuman Roy and Ghosh, Kaushik} } @article {48715, title = {Developing a feeding assay system for evaluating the insecticidal effect of phytochemicals on Helicoverpa armigera}, journal = {Jove-Journal of Visualized Experiments}, volume = {195}, year = {2023}, month = {MAY}, pages = {e65278}, type = {Article}, abstract = {

Helicoverpa armigera, a lepidopteran insect, is a polyphagous pest with a worldwide distribution. This herbivorous insect is a threat to plants and agricultural productivity. In response, plants produce several phytochemicals that negatively impact the insect{\textquoteright}s growth and survival. This protocol demonstrates an obligate feeding assay method to evaluate the effect of a phytochemical (quercetin) on insect growth, development, and survival. Under controlled conditions, the neonates were maintained until the second instar on a pre-defined artificial diet. These second-instar larvae were allowed to feed on a control and quercetin-containing artificial diet for 10 days. The insects{\textquoteright} body weight, developmental stage, frass weight, and mortality were recorded on alternate days. The change in body weight, the difference in feeding pattern, and developmental phenotypes were evaluated throughout the assay time. The described obligatory feeding assay simulates a natural mode of ingestion and can be scaled up to a large number of insects. It permits one to analyze phytochemicals{\textquoteright} effect on the growth dynamics, developmental transition, and overall fitness of H. armigera. Furthermore, this setup can also be utilized to evaluate alterations in nutritional parameters and digestive physiology processes. This article provides a detailed methodology for feeding assay systems, which may have applications in toxicological studies, insecticidal molecule screening, and understanding chemical effects in plant-insect interactions.

}, issn = {1940-087X}, doi = {10.3791/65278}, author = {Mohite, Sharada D. and Patil, Yogita P. and Nichit, Vikram J. and Joshi, Rakesh S.} } @article {48694, title = {Domain shuffling and site-saturation mutagenesis for the enhanced inhibitory potential of amaranthaceae α-amylase inhibitors}, journal = {Protein Journal}, volume = {42}, year = {2023}, month = {OCT}, pages = {519-532}, type = {Article}, abstract = {

Amaranthaceae a-amylase inhibitors (AAIs) are knottin-type proteins with selective inhibitory potential against coleopteran a-amylases. Their small size and remarkable stability make them exciting molecules for protein engineering to achieve superior selectivity and efficacy. In this report, we have designed a set of AAI pro- and mature peptides chimeras. Based on in silico analysis, stable AAI chimeras having a stronger affinity with target amylases were selected for characterization. In vitro studies validated that chimera of the propeptide from Chenopodium quinoa a-AI and mature peptide from Beta vulgaris a-AI possess 3, 7.6, and 4.26 fold higher inhibition potential than parental counterparts. Importantly, recombinant AAI chimera retained specificity towards target coleopteran a-amylases. In addition, to improve the inhibitory potential of AAI, we performed in silico site-saturation mutagenesis. Computational analysis followed by experimental data showed that substituting Asparagine at the 6th position with Methionine had a remarkable increase in the specific inhibition potential of Amaranthus hypochondriacus a-AI. These results provide structural-functional insights into the vitality of AAI propeptide and a potential hotspot for mutagenesis to enhance the AAI activity. Our investigation will be a toolkit for AAI{\textquoteright}s optimization and functional differentiation for future biotechnological applications.

}, keywords = {\& alpha, -Amylase, -Amylase inhibitors, Amaranthaceae, Coleoptera, Peptide, Pest control}, issn = {1572-3887}, doi = {10.1007/s10930-023-10148-y}, author = {Rane, Ashwini S. and Nair, Vineetkumar S. and Joshi, Rakesh S. and Giri, Ashok P.} } @article {48257, title = {Effect of acidity and mesoporosity in H-USY on conversion of wheat straw to ethyl levulinate (Biofuel additive)}, journal = {Journal of the Indian Chemical Society}, volume = {100}, year = {2023}, month = {FEB}, pages = {100883}, type = {Article}, abstract = {

Cold flow properties of biodiesel can be improved by addition of additives especially ethyl levulinate (EL up to 20\%). There are very limited information on synthesis of EL from actual raw biomass like wheat straw over heterogeneous catalyst. The present article elaborated on optimization of Acidity to Mesoporosity ratio in H-USY, which is crucial for its application in conversion of raw wheat straw to selective formation of EL in one-step. The acidity and mesoporosity is monitor by systematic post treatment of desilication and dealumination. Optimum acidity/mesoporosity ratio of 3.6 in HUSY resulted in to maximum EL yield of 24.5\%, which is probably the highest so far.

}, keywords = {Acidity, Biofuel additive, Dealumination, Desilication, ethyl levulinate, H-USY, Mesoporosity, Wheat straw}, issn = {0019-4522}, doi = {10.1016/j.jics.2023.100883}, author = {Heda, Jidnyasa and Niphadkar, Prashant and Nandanwar, Sachin and Bokade, Vijay} } @article {48688, title = {Effective valorization of blackstrap molasses to poly gamma glutamic acid (γ-PGA) using L-glutamic acid independent feeding approach and its significance as drought mitigator in wheat plant}, journal = {Industrial Crops and Products}, volume = {202}, year = {2023}, month = {OCT}, pages = {116985}, type = {Article}, abstract = {

One of the finest approaches towards sustainable waste management is its effective valorization to value-added products (VAPs). Waste valorization is garnering considerable attention since it delivers substantial advantages, including environmental stability and a sustainable and viable platform for producing different VAPs. One such VAP is the poly gamma glutamic acid (\& gamma;- PGA), an extortionate biopolymer known to date. Its exorbitant cost is the main barrier preventing \& gamma;- PGA from becoming commercially viable. Hence, the key to the successful commercialization of \& gamma;- PGA is its sustainable and cost-effective production. In the present study, the ability of Bacillus paralicheniformis NCIM 5769 to utilize molasses for \& gamma;-PGA production with minimal nutrients was investigated. Results showed that 30\% molasses combined with 2\% ammonium nitrate was the optimal medium for \& gamma;-PGA production. Additionally, the anti-drought activity of the synthesized \& gamma;-PGA was evaluated on wheat plants showing significantly higher shoot length, biomass content, and germination rate compared to the control group. These findings suggest that \& gamma;-PGA produced from molasses has the potential to be used as a drought mitigator in wheat plant, thereby achieving the mission of circular economy and sustainable development goal (SGD) 12, i.e. pursuing sustainability patterns for consumption \& production.

}, keywords = {Anti-drought, circular economy, Poly gamma glutamic acid, Sustainable, Waste valorization}, issn = {0926-6690}, doi = {10.1016/j.indcrop.2023.116985}, author = {Nair, Pranav G. and Dharne, Mahesh S.} } @article {48702, title = {Equilibrium adsorption of nitrogen, oxygen, and argon on silver-exchanged hierarchical ETS-10}, journal = {Journal of Chemical and Engineering Data}, volume = {68}, year = {2023}, month = {JUL}, pages = {2159-2172}, type = {Article}, abstract = {

Silver-exchanged hierarchical ETS-10(Ag-H-ETS-10) was synthesizedusing Ag+ exchange with hierarchical Engelhard titanosilicate(H-ETS-10) using silver nitrate solution. The physical propertiesof the adsorbent were analyzed using X-ray diffraction (XRD), BETsurface area, nitrogen adsorption-desorption, pore volume,energy dispersive spectroscopy (EDS), and high resolution-transmissionelectron microscopy (HR-TEM). N-2 physisorption data confirmedthat a micro-mesoporous (bimodal) structure was created in the Ag-H-ETS-10.The equilibrium adsorbent data of pure gases N-2, O-2, and Ar were investigated in the temperature range from 288to 318 K up to 10 bar. The equilibrium adsorption capacity of Ag-H-ETS-10was found to be 1.12 mmol g(-1) for N-2,0.87 mmol g(-1) for O-2, and 1.09 mmol g(-1) for Ar at 298 K and \& SIM;10 bar. \& SIM;20\% higheradsorption capacity was found for N-2 and Ar in Ag-H-ETS-10compared to Ag-ETS-10. The higher sorption capacity was attributedto the formation of a bimodal structure and \& pi;-complexation interactionby the Ag cation, which allows a multilayer of N-2 and Armolecules. The Sips isotherm model was well fitted for the Ag-H-ETS-10experimental data among Langmuir, Freundlich, Toth, and Temkin models.The measured equilibrium adsorption data for Ag-H-ETS-10 can be usefulfor the O-2 purification process.

}, issn = {0021-9568}, doi = {10.1021/acs.jced.3c00124}, author = {Shrotri, Aadesh R. and Niphadkar, Prashant S. and Bokade, Vijay V. and Nandanwar, Sachin U.} } @article {48682, title = {Evaluation of the adhesive properties of vanillin-derived polyhydroxy urethanes}, journal = {Journal of Applied Polymer Science}, volume = {140}, year = {2023}, month = {Dec}, pages = {e54647}, type = {Article}, abstract = {

Poly(hydroxy urethanes) (PHUs) have been considered attractive and safer variants of conventional polyurethanes (PUs). To improve the prerequisites of green and sustainable chemistry herein, we propose the synthesis and utilization of cyclic carbonate monomers majorly derived from vanillin, a lignin derivative, and CO2 for the development of PHUs. Kinetic evaluation on the polymerization temperature ascertained 80 degrees C as the optimum condition for PHU synthesis. The structural evaluation of PHUs was carried out by various spectroscopic techniques, such as FTIR, (HNMR)-H-1, and C-13-NMR, molar masses were determined by gel permeation chromatography (Mn varied between 2500 and 11,100 g/mol), and thermal properties evaluated by differential scanning calorimeter (Tg in the ranges of 28-42 degrees C), and thermogravimetric analysis (stable above 180 degrees C). Since the PHUs are enriched with pendant hydroxyl groups on their backbone which can promote adhesion, lap shear studies on the aluminum substrate exhibited a maximum shear strength of 1.65 +/- 0.37 MPa. This study demonstrates an attractive and environment-friendly pathway for developing novel PHUs network using renewable biobased resources and further explores its applicability as adhesives.

}, keywords = {adhesive, biobased cyclic dicarbonate, diamines, poly(hydroxyurethane)s, Vanillin}, issn = {0021-8995}, doi = {10.1002/app.54647}, author = {Ghuge, Gorakh Hiraman and Kambikanam, Karthika Vayalachery and Nair, Kiran Sukumaran} } @article {48337, title = {Gas sensors and factors influencing sensing mechanism with a special focus on MOS sensors}, journal = {Journal of Materials Science}, volume = {58}, year = {2023}, month = {JAN}, pages = {559-582}, type = {Review}, abstract = {

Industrialization and its progress are very important for the economy and to move towards prosperity, stimulating innovation and creating jobs. Nonetheless, industrialization has negative impacts, if not done judiciously, such as pollution, increased greenhouse gas emissions, and global warming. Therefore, amenity-with-security is of fundamental significance in a new and dynamic lifestyle. A gas sensor is one of the crucial devices for monitoring and subsequently preserving the clean atmosphere among a number of other safety technologies. In-depth assessments of gas sensors and their necessity in the environment (air) pollution are provided in the current review. With a special emphasis on metal oxide semiconductor (MOS)-based gas sensors, the review includes a thorough study of gas sensors and the factors relating to sensing mechanisms. It not only describes the basic concepts and brief history of gas sensors, but also highlights the schemes responsible for improving the gas sensing properties and state-of-art literature review. These schemes include (1) surface engineering/morphological tuning and (2) bulk and surface doping. To keep scientific rigour and in-depth analyses, this review focuses on these two schemes only. In the doping area, the emphasis is given on graphene loading, decorated with nanoparticles of noble metals, spillover mechanism, and heterojunction (p-n, n-n, and p-p) formation. The conclusion summarizes the most optimized MOS gas sensors with enhanced gas sensing capabilities. The emphasis is given to formulate the article in such a way that it will be useful for the beginners who wish to explore the gas sensor research field, as well as to the established researchers to further improve the sensing capabilities of MOS gas sensors.

}, issn = {0022-2461}, doi = {10.1007/s10853-022-08072-0}, author = {Nadargi, Digambar Y. Y. and Umar, Ahmad and Nadargi, Jyoti D. D. and Lokare, Smita A. A. and Akbar, Sheikh and Mulla, Imtiaz S. S. and Suryavanshi, Sharad S. S. and Bhandari, Nagesh L. L. and Chaskar, Manohar G. G.} } @article {48298, title = {Genetic diversity of toxigenic Fusarium verticillioides associated with maize grains, India}, journal = {Genetics and Molecular Biology}, volume = {46}, year = {2023}, month = {MAY}, pages = {e20220073}, type = {Article}, abstract = {

In the present investigation, prevalence, genetic diversity, and mycotoxin producing potential of Fusarium species associated with maize grain samples were studied from different geographical regions of India. The highest prevalence of Fusarium verticillioides was recorded as 88.52\%, followed by F. coffeatum, F. foetens, and F. euwallaceae, 6.55\%, 3.27\%, and 1.63\%, respectively. We isolated 54 strains of F. verticillioides, and their genetic diversity was studied by inter simple sequence repeats (ISSR). The ISSR fingerprints (AG) 8C and (AG) 8G showed 252 and 368 microsatellite sites in the genome of F. verticillioides and resulted in 99-100\% repeatability and reproducibility. The Simpson (SID) and Shannon (H) indices (0.78 and 2.36) suggest that F. verticillioides strains exhibit moderate to high diversity. Molecular detection of fumonisin B1 (FB1) biosynthetic genes (FUM1 and FUM13) involved in FB1 production in F. verticillioides was confirmed by polymerase chain reaction (PCR). Furthermore, 91\% of the strains were positive for FB1 production, which was affirmed by liquid chromatography with tandem mass spectrometry (LC-MS-MS). In-vitro appurtenance of F. verticillioides spores exhibited a high to moderate effect on the growth and development of the maize. The current finding demonstrated that most F. verticillioides strains showed a wide range of genetic diversity with varied toxigenic and pathogenic potentials. In conclusion, for the first time, F. coffeatum, F. foetens, and F. euwallaceae species were reported from maize grain samples in India. They were positive for FB1 and negatively affecting grain quality, which is a major concern in food safety.

}, keywords = {diversity, Food safety, Fusarium verticillioides, Mycotoxin, pathogenicity}, issn = {1415-4757}, doi = {10.1590/1678-4685-GMB-2022-0073}, author = {Navale, Vishwambar D. and Sawant, Amol M. and Vamkudoth, Koteswara Rao} } @article {48824, title = {Green synthesis of GO-loaded Ag/ZnO nanocomposites for methyl orange degradation}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {34}, year = {2023}, month = {JUL}, pages = {1568}, type = {Article}, abstract = {

Nature is a perfect laboratory for creating novel nanomaterials for a variety of applications. A robust green synthesis approach to GO-loaded Ag/ZnO nanocomposite materials using medicinal plant extraction and their potential application in methyl orange dye degradation are reported. The straightforward technique employs zinc and silver nitrate precursors in an aqueous solution of medicinal plant extract, causing the precipitation process. Prior to photocatalytic investigations, the physico-chemical properties of the material are analysed using TG-DTA, XRD, FE-SEM, TEM, EDAX and BET. The developed material showcase hexagonal wurtzite structure of ZnO, with face-centered-cubic phase of Ag and AgCl. All the samples exhibit aggregated, irregular rounded grains, as expected in the precipitation synthesis process. Pristine ZnO showed 15.5\% degradation efficiency towards methyl orange, which was further improved by doping Ag from 0.5 to 2 mol\%. The catalyst with 1 mol\% Ag doping resulted in the better photocatalytic activity (26.30\%), which has again improved by loading the GO (27.46\%). The outcome of this study provides the new insights to GO-loaded Ag/ZnO nanocomposites by green synthesis route, in view of photocatalytic applications.

}, issn = {0957-4522}, doi = {10.1007/s10854-023-10979-6}, author = {Nadargi, Digambar Y. and Nadargi, Jyoti D. and Tamboli, Mohaseen S. and Tamboli, Asiya M. and Mulla, Imitaz S. and Umar, Ahmad and Truong, Nguyen Tam Nguyen and Suryavanshi, Sharad S.} } @article {48761, title = {Identification of new modulator of DNA repairing pathways based on natural product ({\textpm})-peharmaline A}, journal = {Bioorganic \& Medicinal Chemistry}, volume = {91}, year = {2023}, month = {AUG}, pages = {117365}, type = {Article}, abstract = {

The complex heterogenic environment of tumour mass often leads to drug resistance and facilitate chemo insensitivity triggering more malignant phenotypes among cancer patients. Major DNA-damaging cancer drugs have been consistently proven unsuccessful in terms of elevating chemo-resistance. (\& PLUSMN;)-peharmaline A, a hybrid natural product isolated from seeds of Peganum harmala L. possesses significant cytotoxic activities. Herein, we have described the design, and synthesis of a novel library of close and simplified analogues around the anticancer natural product (\& PLUSMN;)-peharmaline A and investigated their cytotoxic activities, which led to the identification of three structurally simplified lead compounds exhibiting better potency than parent natural product. Among them, demethoxy analogue of peharmaline A was further investigated for its anticancer potential eliciting demethoxy analogue as potent DNA-damage inducing agent attenuating the expression of the proteins responsible for the DNA damage repair. Therefore, this demethoxy analogue warrants detailed investigations for the confirmations of the molecular mechanism-based studies responsible for its anticancer activity.

}, keywords = {DNA damage, EMT, Pictet, Spengler reaction, Structure-activity relationship, Total synthesis}, issn = {0968-0896}, doi = {10.1016/j.bmc.2023.117365}, author = {Kulkarni, Akshay S. and Dash, Anshurekha and Shingare, Rahul D. and Chand, Jagdish and Manhas, Diksha and Singh, Aman and Nandi, Utpal and Goswami, Anindya and Reddy, D. Srinivasa} } @article {48808, title = {Inhibition of amyloid β1-42 peptide aggregation by newly designed cyclometallated palladium complexes}, journal = {International Journal of Biological Macromolecules}, volume = {248}, year = {2023}, month = {SEP }, pages = {125847}, type = {Article}, abstract = {

Uncontrolled amyloid aggregation is a frequent cause of neurodegenerative disorders such as prions and Alzheimer{\textquoteright}s disease (AD). As a result, many drug development approaches focus on evaluating novel molecules that can alter self-recognition pathways. Herein, we designed and synthesized the cyclometallated pyrene (Pd-1 and Pd-3) and anthracene (Pd-2) based palladium complexes ([Pd((L-1)Cl] Pd-1, [Pd(L-2)Cl](Pd-2), and [Pd(L-3)Cl] (Pd-3)). This study explores the effect of these complexes on the aggregation, fibrillation, and amyloid formation of bovine serum albumin (BSA) and A beta(1-42) peptide. Several spectroscopic methods were used to characterize all the Pd-complexes, and the molecular structure of Pd -3 was determined by X-ray crystallography. The secondary structures were studied using circular dichroism (CD) and transmission electron microscopy (TEM), while am-yloid aggregation and inhibitory activities were investigated using the Thioflavin-T (ThT) fluorescence assay. Molecular docking of the Pd-complex (Pd-3) was done using fibril (PDB: 2BEG) and monomeric (PDB: 1IYT) peptides using Auto-dock Vina. As a result, the hydrogen bonding and hydrophobic interaction between the aromatic rings of the Pd-complexes and the amino acids of amyloid-beta peptides significantly reduced the pro-duction of ordered beta-sheets of amyloid fibrils and protein aggregation in the presence of Pd-2 and Pd-3 complexes.

}, keywords = {A beta(1-42) peptide, Aggregation and molecular docking, Palladium complex}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.125847}, author = {Saini, Rahul and Navale, Govinda R. and Singh, Sain and Singh, Haobam Kisan and Chauhan, Rahul and Agrawal, Sonia and Sarkar, Dhiman and Sarma, Manabendra and Ghosh, Kaushik} } @article {48717, title = {Isolation and molecular characterization of indigenous penicillium chrysogenum/rubens strain portfolio for penicillin V production}, journal = {Microorganisms}, volume = {11}, year = {2023}, month = {APR}, pages = {1132}, type = {Article}, abstract = {

Beta (beta)-lactam antibiotic is an industrially important molecule produced by Penicillium chrysogenum/rubens. Penicillin is a building block for 6-aminopenicillanic acid (6-APA), an important active pharmaceutical intermediate (API) used for semi-synthetic antibiotics biosynthesis. In this investigation, we isolated and identified Penicillium chrysogenum, P. rubens, P. brocae, P. citrinum, Aspergillus fumigatus, A. sydowii, Talaromyces tratensis, Scopulariopsis brevicaulis, P. oxalicum, and P. dipodomyicola using the internal transcribed spacer (ITS) region and the beta-tubulin (BenA) gene for precise species identification from Indian origin. Furthermore, the BenA gene distinguished between complex species of P. chrysogenum and P. rubens to a certain extent which partially failed by the ITS region. In addition, these species were distinguished by metabolic markers profiled by liquid chromatography-high resolution mass spectrometry (LC-HRMS). Secalonic acid, Meleagrin, and Roquefortine C were absent in P. rubens. The crude extract evaluated for PenV production by antibacterial activities by well diffusion method against Staphylococcus aureus NCIM-2079. A high-performance liquid chromatography (HPLC) method was developed for simultaneous detection of 6-APA, phenoxymethyl penicillin (PenV), and phenoxyacetic acid (POA). The pivotal objective was the development of an indigenous strain portfolio for PenV production. Here, a library of 80 strains of P. chrysogenum/rubens was screened for PenV production. Results showed 28 strains capable of producing PenV in a range from 10 to 120 mg/L when 80 strains were screened for its production. In addition, fermentation parameters, precursor concentration, incubation period, inoculum size, pH, and temperature were monitored for the improved PenV production using promising P. rubens strain BIONCL P45. In conclusion, P. chrysogenum/rubens strains can be explored for the industrial-scale PenV production.

}, keywords = {beta-tubulin gene, high-performance liquid chromatography, internal transcribed spacer region, Penicillium chrysogenum/rubens, phenoxymethyl penicillin}, doi = {10.3390/microorganisms11051132}, author = {Sawant, Amol M. and Navale, Vishwambar D. and Vamkudoth, Koteswara Rao} } @article {48790, title = {Luminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties}, journal = {Polymer Engineering and Science}, volume = {63}, year = {2023}, month = {JUL}, pages = {2059-2072}, type = {Article}, abstract = {

The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt\% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt\% thermoplastic polyurethane (TPU) into PLA led to 223\% increase in toughness and 21\% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35\%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.

}, keywords = {3D printing, Composite, fluorescence, Nanocellulose, poly(lactic acid), toughness}, issn = {0032-3888}, doi = {10.1002/pen.26345}, author = {Kothavade, Premkumar Anil and Yadav, Prashant and Nidhankar, Aakash D. and Torris, Arun and Pol, Harshawardhan and Kafi, Abdullah and Bateman, Stuart and Sukumaran, Santosh Babu and Shanmuganathan, Kadhiravan} } @article {48733, title = {Metabolites from lactococcus lactis subsp. lactis: isolation, structure elucidation, and antimicrobial activity}, journal = {ACS Omega}, volume = {8}, year = {2023}, month = {SEP}, pages = {36628-36635}, type = {Article}, abstract = {

Herein, we disclose the identification of novel metabolites from a potential probiotic strain, Lactococcus lactis subsp. lactis, obtained from traditional dairy milk samples collected in Maharashtra, India (in January 2021). Isolated metabolites include pyrazin-2-carboxamide [1, pyrazinamide, a potential antitubercular drug], 3,5-dihydroxy-6-methyl-2,3-dihydro-4H-pyran-4-one (2, DDMP), 2,4-di-tert-butylphenol (3), and hexadecanoic acid (4, palmitic acid). The chemical structures of these metabolites were elucidated through extensive 1D NMR (H-1 and C-13) and 2D NMR (HSQC, HMBC, and NOESY) analyses, high-resolution mass spectrometry, high-performance liquid chromatography, and single-crystal X-ray crystallography. Furthermore, these novel metabolites exhibited potent inhibitory activities against various bacteria, fungi, and yeast strains with minimum inhibitory concentrations ranging between 1.56 and 25 mu g/mL, and compounds 1 and 3 were found to be most active against a wide range of microbial strains tested.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c01662}, author = {Navale, Vishwambar D. and Borade, Balasaheb R. and Rama Krishna, Gamidi and Vamkudoth, Koteswara Rao and Kontham, Ravindar} } @article {48765, title = {MnXWO4 nanostructure-based catalysts for single-step oxidation of cyclohexane and methane to oxygenates}, journal = {ACS Applied Nano Materials}, volume = {6}, year = {2023}, month = {APR}, pages = {7245-7258}, type = {Article}, abstract = {

Activation of the C-H bond in cyclohexane (CYH) and methane is a crucial step to obtain desirable oxygenated products using nanostructured catalyst and is a great challenge and an efficient route to mitigate the inauspicious effects of climate change. The active sites were identified using XRD, HR-TEM, SEM, N2 sorption analysis, TPR, Raman, XPS, TGA, in situ DRIFT, XAS, etc. In optimal reaction conditions, 46\% of CYH was converted into adipic acid (AA) on MnxWO4 nanostructures within 6 h. The recyclability test confirmed the catalyst heterogeneity, which revealed no appreciable loss of catalytic activity even after three consecutive reactions. In situ DRIFT study reveals that CYH is oxidized to cyclohexanone and cyclohexanol (KA oil) and is further oxidized to AA via carboxylate intermediates. DFT studies disclosed that MnOx species are responsible for the C-H activation of CYH, and the Mn2+/Mn3+ redox centers play a vital role in the absorption of KA oil to form AA. Herein, we demonstrated the significant role of the {\textquoteleft}{\textquoteleft}MnOx{\textquoteright}{\textquoteright} species and that adequate Lewis and Bronsted acidic sites, redox centers of (Mn2+/Mn3+), and lattice oxygen are accountable for the CYH conversion toward the AA. Additionally, we have reported the oxidation of methane to methanol (146 mu mole per gram of catalyst) in the presence of water at 75 degrees C without over-oxidation products.

}, keywords = {Adipic Acid, C-H bond activation, Cyclohexane oxidation, methane activation, MnOx chain, Redox center}, doi = {10.1021/acsanm.3c00319}, author = {Prabu, Marimuthu and Manikandan, Marimuthu and Samal, Pragnya Paramita and Gurrala, Lakshmi Prasad and Mekala, Siva Prasad and Archana, Ramakrishnan and Nayak, Chandrani and Bhattacharyya, D. and Jha, S. N. and Krishnamurty, Sailaja and Raja, Thirumalaiswamy} } @article {48767, title = {MXene surface terminations: a perspective}, journal = {Journal of Physical Chemistry C}, volume = {127}, year = {2023}, month = {OCT }, pages = {20197-20206}, type = {Article}, abstract = {

Two-dimensional (2D) transition metal carbides and nitrides are among the newest, and probably largest, families of 2D materials that have been discovered. They have shown promise in many applications, such as electromagnetic shielding, energy storage devices like batteries and supercapacitors, transparent conductive electrodes, as catalysts for hydrogen production, and several others. Their general formula is Mn+1XnTz (n = 1-4) or M1.33XTz, where M is an early transition metal, X is carbon and/or nitrogen, and T-z represents various terminations present upon etching the Al layer. The first MXene discovered, Ti3C2Tz, was synthesized by etching aluminum (Al) from the nanolaminated MAX phase Ti3AlC2 using hydrofluoric acid (HF). Since the discovery of Ti3C2Tz in 2011, more than 30 other MXene chemistries have been reported with different M and X elements. It has been observed that, as expected, changing the MXene chemistry also influences the properties in the range of applications listed above, allowing us to tailor them according to what suits the application of interest the best. Unlike the success in tailoring the M and X elements over the years, attempts to engineer T-z was, until recently, a challenge. A series of recent discoveries and an improved understanding of MXene surface properties has now rendered the customization of T-z possible. This progress added a new {\textquoteleft}{\textquoteleft}knob{\textquoteright}{\textquoteright} that can be turned to further tune MXene properties. The majority of this Perspective is focused on surface terminations: their engineering, characterization, and effect on MXene properties.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.3c04324}, author = {Natu, Varun and Barsoum, Michel W.} } @article {48834, title = {Nanosilica from Averrhoa bilimbi juice pre-treated rice husk: preparation and characterization}, journal = {Journal of Cleaner Production}, volume = {413}, year = {2023}, month = {AUG }, pages = {137476}, type = {Article}, abstract = {

The preparation of nanosilica from rice husk without using any concentrated mineral acids is a novel concept. This work proposes a bioleaching strategy to remove metallic impurities from rice husk for the preparation of nanosilica. Herein, nanosilica (BJRHS) was prepared by calcinating Averrhoa bilimbi juice pre-treated rice husks in a muffle furnace. The chemical and atomic structures of commercial precipitated silica (CS), rice husk ash (RHA), and BJRHS were analyzed using different analytical techniques. The optimal leaching time, calcination temperature, and calcination time were 1 h, 500 degrees C, and 6 h respectively. The particle size of BJRHS was found to be 6-12 nm, which is less than that of RHA and CS. The BET surface area of BJRHS (204 m2/g) was found to be greater than RHA (110.5 m2/g) and CS (172.1 m2/g). Mesoporous nanosilica with excellent surface area and purity was produced sustainably from rice husk which could be recommended to use in the field of catalysis, polymer technology, etc.

}, keywords = {Averrhoa bilimbi juice, Bioleaching, Nanosilica, rice husk}, issn = {0959-6526}, doi = {10.1016/j.jclepro.2023.137476}, author = {Dominic, C. D. Midhun and Neenu, K. V. and Begum, P. M. Sabura and Joseph, Rani and Rosa, Derval dos Santos and Duan, Yongxin and Balan, Aiswarya and Ajithkumar, T. G. and Soumya, Mary and Shelke, Ankita and Parameswaranpillai, Jyotishkumar and Badawi, Michael} } @article {48667, title = {Non-confined gamma monoclinic sulfur cathode in carbonate electrolyte based room temperature K-S batteries}, journal = {JOURNAL OF MATERIALS CHEMISTRY A}, volume = {11}, year = {2023}, month = {JUL}, pages = {15924-15930}, type = {Article}, abstract = {

Potassium-sulfur cells have garnered a lot of interest in grid storage chemistry due to the high abundance of both elements and hence their low cost. However, their development is hindered by the polysulfide shuttle effect and their dependency on electrolytes with limited commercial viability. The inability to use carbonate electrolytes is due to the irreversible reaction between it and PS, rendering the cell useless in the first few cycles. Here we expand our use of monoclinic \& gamma;-sulfur in carbon nanofibers (\& gamma;S-CNFs) to the potassium-sulfur, K-S, chemistry. Herein we show that using \& gamma;-S enables the cells to run for 500 cycles at \& SIM;900 mA h g(-1) in commercial carbonate electrolytes. We further attempt to understand the role of \& gamma;S-CNFs in K-S cells with electrochemical characterization and postmortem spectroscopy. As far as we are aware this is the first application of \& gamma;-S in K-S cells. Its outstanding performance should lead to new avenues for the development of this promising chemistry.

}, issn = {2050-7488}, doi = {10.1039/d3ta01751f}, author = {Pai, Rahul and Cardoza, Neal Amadeus and Natu, Varun and Barsoum, Michel W. and Kalra, Vibha} } @article {48681, title = {Organocatalysed one-pot three component synthesis of 3,3'-disubstituted oxindoles featuring an all-carbon quaternary center and [spiro 2H-pyran-3,4'-indoline]}, journal = {RSC Advances}, volume = {13}, year = {2023}, month = {APR}, pages = {13206-13212}, type = {Article}, abstract = {

A simple and efficient methodology for the one-pot synthesis of 3,3 {\textquoteleft}-disubstituted oxindoles featuring an all-carbon quaternary center has been demonstrated through l-proline catalysed three-component reaction based on sequential Knoevenagel condensation/Michael addition and also one-pot synthesis of spiro[2H-pyran-3,4 {\textquoteleft}-indoline] through consecutive Knoevenagel condensation/Michael addition/reduction/cyclization reactions from readily available isatin derivatives, malononitrile, and ketones. The present methodology presents several advantages, including simple reaction set-up, short reaction times, and easy to work-up. Also, this strategy offers broad substrate scope with excellent yields and high atom economy, under mild reaction conditions.

}, doi = {10.1039/d3ra00510k}, author = {Nichinde, Chandrakant B. and Patil, Baliram R. and Chaudhari, Suryakant S. and Mali, Bhupendra P. and Gonnade, Rajesh G. and Kinage, Anil K.} } @article {48671, title = {Palladium-catalyzed polar solvent empowered synthesis of hyper-branched ethylene oligomers and their applications}, journal = {Polymer Chemistry}, volume = {14}, year = {2023}, month = {JUL}, pages = {3239-3251}, type = {Article}, abstract = {

In this contribution, we report the synthesis of two naphthoxy imine ligands, 2-(((2,6-dibenzhydryl-4-methoxyphenyl)imino)methyl)naphthalen-1-ol (L1) and 2-(((2,6-diisopropylphenyl)imino)methyl)naphthalen-1-ol (L2), with different steric and electronic features. L1 and L2 were treated with [(TMEDA)PdMe2] to obtain the corresponding neutral palladium(ii) complexes Cat.1 and Cat.2 in excellent yields. The identity of Cat.1 and Cat.2 was unambiguously ascertained using a combination of spectroscopic and analytical methods, including single-crystal X-ray diffraction. When exposed to 5 bar ethylene pressure, Cat.1 produced hyperbranched ethylene oligomers. The microstructure analysis of ethylene oligomers confirmed the existence of methyl, ethyl, propyl, and sec-butyl branches, with a molecular weight (M-n) of 500-1400 g mol(-1), a PDI of 1.46-2.10, and 67-106 branches per 1000 carbon atoms. The use of a polar solvent, tetrahydrofuran, led to a remarkable 3-fold increase in oligomerization activity without compromising the branching and molecular weight. The resultant hyperbranched ethylene oligomers were selectively monofunctionalized using industrially practiced hydroformylation, ozonolysis, and epoxidation, almost quantitatively. The hydroxy functionalized ethylene oligomer (F4) (5 wt\%) was melt-compounded with LLDPE and Nylon-6 to produce a tough yet flexible blend with a higher strain-to-failure as compared to an uncompatibilized blend.

}, issn = {1759-9954}, doi = {10.1039/d3py00311f}, author = {Birajdar, Rajkumar S. and Gonnade, Rajesh G. and Pol, Harshawardhan V. and Prabhu, M. Basava and Rokade, Dhammaraj and Nandimath, Sheetal and Chikkali, Samir H.} } @article {48308, title = {Pd loaded bismuth ferrite: a versatile perovskite for dual applications as acetone gas sensor and photocatalytic dye degradation of malachite green}, journal = {Ceramics International}, volume = {49}, year = {2023}, month = {FEB}, pages = {5738-5747}, type = {Article}, abstract = {

Herein we report the palladium loaded bismuth ferrite for its bidirectional application as acetone gas sensor and photocatalytic dye degradation of malachite green. The motivation for loading Pd on bismuth ferrite (BFO) is due to its fascinating catalytic redox reactions causing faster adsorption and desorption of the oxygen molecules over the metal oxide. The planned perovskites were developed via surfactant assisted sol-gel auto-combustion route, and characterized their physico-chemical properties using XRD, SEM, TEM, HRTEM, EDAX, XPS and BET. The developed BFO showed the best selectivity towards acetone, whose response was 69\% at 300 degrees C operating temperature for 500 ppm gas concentration. By tuning the surface area and catalytic behavior using CTAB and Pd loading, respectively, the enhancement in the gas response properties of BFO was achieved to 95\% with the response and recovery time of 75 s and 104 s. The 1 wt\% Pd loaded BFO showed the highest response (95\%) in comparison to rest of the Pd loadings (0.5, 1.5 and 2.0 wt\%). Moreover, the sunlight driven photocatalytic dye degradation of malachite green is carried out at 1 h exposure time. Here as well, 1 wt\% Pd loaded BFO exhibited the maximum dye degradation efficiency of 51\%. The results of this study demonstrate the developed perovskites have a significant potential for the use in dual applications such as acetone gas sensor and MG photocatalysis.

}, keywords = {Acetone sensor, Bismuth ferrite, Palladium loading, Photo dye -degradation}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2022.10.153}, author = {Ghadage, Pandurang and Kodam, Pavan and Nadargi, Digambar and Patil, Suraj and Tamboli, Mohaseen and Bhandari, Nagesh and Mulla, Imtiaz and Park, Chinho and Suryavanshi, Sharad} } @article {48469, title = {Photocatalytic setup for in situ and operando ambient-pressure X-ray photoelectron spectroscopy at MAX IV Laboratory}, journal = {Journal of Synchrotron Radiation}, volume = {30}, year = {2023}, month = {MAY}, pages = {613-619}, type = {Article}, abstract = {

The Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) endstation at the SPECIES beamline at MAX IV Laboratory has been improved. The latest upgrades help in performing photo-assisted experiments under operando conditions in the mbar pressure range using gas and vapour mixtures whilst also reducing beam damage to the sample caused by X-ray irradiation. This article reports on endstation upgrades for APXPS and examples of scientific cases of in situ photocatalysis, photoreduction and photo-assisted atomic layer deposition (photo-ALD).

}, keywords = {APXPS, photo-ALD, Photocatalysis, solar simulator}, issn = {0909-0495}, doi = {10.1107/S1600577523002801}, author = {Klyushin, Alexander and Ghosalya, Manoj and Kokkonen, Esko and Eads, Calley and Jones, Rosemary and Nalajala, Naresh and Gopinath, Chinnakonda S. and Urpelainen, Samuli} } @article {48328, title = {Photoplethysmograph based arrhythmia detection using morphological features}, journal = {Biomedical Signal Processing and Control}, volume = {81}, year = {2023}, month = {MAR}, pages = {104422}, type = {Article}, abstract = {

Photoplethysmography (PPG) is a non-invasive optical technique that is used for the detection of cardiovascular diseases. The paroxysmal nature of arrhythmic events and the lack of timely recorded data emphasize the need to develop an automated method for the identification of arrhythmias. The literature shows the detection of a single type of arrhythmia using PPG. However, limited research has been carried out for the detection of multiple types of arrhythmia. In this research work, a new set of morphological features have been proposed for the automated detection of multiple arrhythmias using rule-based and statistical learning-based approaches. The proposed work has been implemented on the retrospective dataset and validated on the prospective dataset. The results show that the rule-based arrhythmia detection method is equipollent to the statistical learning approach with an accuracy of 98.43\%/94.16\% on the retrospective dataset and 94.16\%/93\% on the prospective dataset.

}, keywords = {Arrhythmia, Machine learning algorithms, Photoplethysmography, Signal processing}, issn = {1746-8094}, doi = {10.1016/j.bspc.2022.104422}, author = {Neha and Sardana, H. K. and Kanawade, R. and Dogra, N.} } @article {48797, title = {Photo-stable, 1D-nanofilaments TiO2-based lepidocrocite for photocatalytic hydrogen production in water-methanol mixtures}, journal = {Matter}, volume = {6}, year = {2023}, month = {SEP}, pages = {2853-2869}, type = {Article}, abstract = {

Water and sunlight are the cleanest, most renewable, and abundant resources on Earth. Developing inexpensive, scalable photocatalysts that are highly stable for hydrogen (H-2) production has long been a cherished dream of humanity. Herein, we report on one-dimensional lepidocrocite-based sub-nanofilaments (NFs), approximate to 5 x 7 \& Aring;(2) in cross-section, that generate H-2 from 80:20 v/v water/methanol mixtures when illuminated by simulated sunlight. The NFs were stable in the mixtures for times \>4,300 h, 300 h of which were under irradiation. Apparent quantum yields as high as 11.7\% were obtained. Based on deuterated water results, we conclude that water is the H-2 source. Further, no carbon dioxide (CO2) due to photocatalytic degradation of methanol was detected. Therefore, the NFs have strong green credentials and lucrative economic prospects for large scale up. We expect these NFs will lead to new lines for developing cheap and ultra-stable materials to produce H-2 photochemically for a long time.

}, issn = {2590-2393}, doi = {10.1016/j.matt.2023.05.026}, author = {Badr, Hussein O. and Natu, Varun and Neatu, Stefan and Neatu, Florentina and Kuncser, Andrei and Rostas, Arpad M. and Racey, Matthew and Barsoum, Michel W. and Florea, Mihaela} } @article {48479, title = {Polymorph II of hydroxyurea 150 years after its first synthesis}, journal = {Crystengcomm}, volume = {25}, year = {2023}, month = {MAY}, pages = {2712-2716}, type = {Article}, abstract = {

A new polymorph of hydroxyurea (HU) was crystallized 150 years after its first synthesis. Due to its medicinal use in neoplastic diseases and sickle cell anemia, a high throughput screen of HU binary cocrystals was attempted. Instead of a cocrystal, an isoenergetic form II crystallized concomitantly with urea in methanol.

}, doi = {10.1039/d3ce00163f}, author = {Rai, Sunil K. and Tothadi, Srinu and Arhangelskis, Mihails and George, Christy P. and Gonnade, Rajesh G. and Nangia, Ashwini K.} } @article {48800, title = {Possible handle for broadening the catalysis regime towards low temperatures: proof of concept and mechanistic studies with CO oxidation on surface modified Pd-TiO2}, journal = {Physical Chemistry Chemical Physics}, volume = {25}, year = {2023}, month = {AUG }, pages = {22040-22054}, type = {Article}, abstract = {

The present work demonstrates the effect of temperature-dependent surface modification (SM) treatment and its influence in broadening the catalysis regime with Pd-TiO2 catalysts prepared by various methods. Due to SM induced changes, a shift in the onset of CO oxidation activity as well as broadening of the oxidation catalysis regime by 30 to 65 K to lower temperatures is observed compared to the temperature required for virgin counterparts. SM carried out at 523 K for Pd-Photo-TiO2 exhibits the lowest onset (10\% CO2 production - T-10) and T-100 for CO oxidation at 360 and 392 K, respectively, while its virgin counterpart shows T-10 and T-100 at 393 and 433 K, respectively. The SMd Pd-TiO2 catalysts were investigated using X-ray photoelectron spectroscopy (XPS), ultra-violet photoelectron spectroscopy (UPS) and atomic force microscopy (AFM). It is observed that diffusion of atomic oxygen into Pd-subsurfaces leads to SM and changes the nature of the surface significantly. These changes are demonstrated by work function (\& phi;), surface potential, catalytic activity, and correlation among them. UPS results demonstrate the maximum increase in \& phi; by 0.5 eV for Pd-Photo-TiO2 after SM, compared to all other catalysts. XPS study shows a moderate to severe change in the oxidation states of Pd due to atomic oxygen diffusion into the subsurface layers of Pd. Kelvin probe force microscopy (KPFM) study also reveals corroborating evidence that the surface potential increases linearly with increasing temperature deployed for SM up to 523 K, followed by a marginal decrease at 573 K. The \& phi; measured by KPFM and UPS shows a similar trend and correlates well with the changes in catalysis observed. Our results indicate that there is a strong correlation between surface physical and chemical properties, and \& phi; changes could be considered as a global marker for chemical reactivity.

}, issn = {1463-9076}, doi = {10.1039/d3cp01122d}, author = {Mhamane, Nitin B. B. and Panchal, Suresh and Kolekar, Sadhu K. K. and Ranjan, Ravi and Salgaonkar, Kranti N. N. and Burange, Anand S. S. and Nalajala, Naresh and Datar, Suwarna and Gopinath, Chinnakonda S. S.} } @article {48334, title = {Relativistic coupled-cluster study of SrF for low-energy precision tests of fundamental physics}, journal = {Theoretical Chemistry Accounts}, volume = {142}, year = {2023}, month = {FEB}, pages = {15}, type = {Article}, abstract = {

SrF, being a laser-coolable molecule, can be an interesting system for spectroscopic tests of fundamental physics. We present an electronic structure study of this molecule within the four-component relativistic coupled-cluster singles and doubles (RCCSD) framework and employ the RCCSD-based methods to compute its molecular-frame dipole moment and core properties such as hyperfine structure coupling constant and molecular P, T-odd electronic structure parameters that are of great importance for the high-precision tests of fundamental physics. The impact of basis set size, Hamiltonian and nuclear model on the property calculation of SrF is also investigated. The computed results are in good agreement with the available experimental values. The present study shows that the SrF molecule could be useful for high-precision molecular experiments to explore physics beyond the Standard Model of elementary particles.

}, keywords = {Coupled cluster theory, CP violation, Hyperfine structure, Molecular spectroscopy, Relativistic effects}, issn = {1432-881X}, doi = {10.1007/s00214-023-02953-6}, author = {Talukdar, Kaushik and Buragohain, Haimyapriya and Nayak, Malaya K. K. and Vaval, Nayana and Pal, Sourav} } @article {48310, title = {Rheology and processing study on controlling material and process defects in polymer melt extrusion film casting using polymer blends}, journal = {Journal of Plastic Film \& Sheeting}, volume = {39}, year = {2023}, month = {APR}, pages = {211-240}, type = {Article}, abstract = {

The primary objective of this research paper is to control the material and process defects in polymer melt extrusion film casting (EFC) process for linear chain architecture polyethylene (PE) resins through polymer blending methodology. Extrusion film casting is a well-known industrially important manufacturing process that is used to manufacture thousands of tons of polymer/plastic films/sheets and coated products. In this research, the necking defect in an EFC process has been studied experimentally for a linear low density polyethylene (LLDPE) resin and attempts have been made to control its necking by blending in a long chain branched (LCB) low density polyethylene (LDPE) resin. The blending methodology is based on the understanding that a LDPE resin displays enhanced resistance to necking as compared to the LLDPE resin. It is found that added LDPE resin enhances necking resistance for the primary LLDPE resin. Further, as the LDPE concentration increases in the blend formulation, the necking is further reduced as compared to pure LLDPE. Analogous to past studies on EFC of linear and long chain branched architecture containing PEs, it is observed that as the LDPE is increased in the blend formulations, the formulations displayed enhanced melt elasticity and extensional strain hardening in rheological studies. It is concluded from this study that polyethylene resins having linear chain architecture can be made amenable to enhanced resistance to necking using appropriate amount of a long chain branched resins. Finally, process defects such as the draw resonance onset could be shifted to higher draw ratios as the LDPE level is increased in the LLDPE-LDPE blend formulation.

}, keywords = {Draw resonance, Extrusion, Film, linear chain, long-chain branched, melt elasticity, Necking, onset, strain hardening}, issn = {8756-0879}, doi = {10.1177/87560879221150764}, author = {Rokade, Dhammaraj and Patil, Prashant and Nandimath, Sheetal and Pol, Harshawardhan} } @article {48478, title = {Role of ions and their transporters in combating salt stress in Pandanus odorifer (Forssk.) Kuntze}, journal = {Acta Physiologiae Plantarum}, volume = {45}, year = {2023}, month = {MAY}, pages = {66}, type = {Article}, abstract = {

Soil salinity is a major environmental constraint causing huge losses in crop production. Pandanus odorifer (Forssk.) Kuntze is an aromatic monocot plant species belonging to the family Pandanaceae, which grows naturally on the saline soils along the coasts of Asia, Southeast Asia, and Polynesia. The plants are dioecious and highly fertile, and the consistent saline sprays, strong winds, and severe soil salinity hardly affect their growth and fertility. Hence, understanding the mechanism of high salinity tolerance in P. odorifer could provide major advances in overcoming salinity stress in crop plants. In the present study, we analyzed control (0 M NaCl) and treated (1 M NaCl treatment for 3 weeks) plants of P. odorifer to understand the role of ion distribution, ion transport, and related mechanisms under salt stress. Using a combination of ionomics and transcriptomics approaches, we identified the molecular mechanisms contributing to the high salinity stress in P. odorifer. Under NaCl stress, there was a significant increase in Na, Cl, and other ions in leaves, while the concentrations of Si, Fe, Ni, and Ti decreased. Similarly, in roots, the levels of Na, Mg, Cd, and Cr were significantly high, while the levels of other ions decreased. Most of the genes related to ion transport and homeostasis, such as NHX1, CLC-C, SOS1, HAK, and ABC transporters, were upregulated in 1 M NaCl stress conditions. This study revealed that vacuolar sequestration of Na+ and the distribution of ions in the roots and shoots play significant roles in the salt-stress tolerance mechanism of P. odorifer.

}, keywords = {Ion transport, Ionomics, Pandanus, Salinity tolerance, Transcriptomics, Vacuolar sequestration}, issn = {0137-5881}, doi = {10.1007/s11738-023-03541-8}, author = {Rashmi, Deo and Ansari, Waquar A. and Kadoo, Narendra Y. and Barvkar, Vitthal T. and Deshmukh, Rupesh and Nadaf, Altafhusain B.} } @article {48764, title = {Scalable synthesis of silacyclohexanones and ready access to silicon building blocks}, journal = {Organic Letters}, volume = {25}, year = {2023}, month = {SEP }, pages = {6881-6885}, type = {Article}, abstract = {

A simple and efficient two-step method for the synthesis of silacyclohexanones starting from bis(bromoethylsilanes) using TosMIC is presented. The prepared silacyclohexanones were transformed to nine different heterocycles with silicon incorporation. In addition, the developed methodology was used for the synthesis of a sila analogue of the HDAC6 inhibitor tubastatin A.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.3c02561}, author = {Ramesh, Eagala and Nandawadekar, Laxman D. and Rao, Ramana Sreenivasa and Reddy, D. Srinivasa} } @article {48273, title = {Selective and generic photocatalytic oxidation of alcohol with Pd-TiO2 thin films: butanols to butanal/butanone with different morphologies of Pd and 0.5 theta(Pt)-Pd counterparts}, journal = {Chemistry-An Asian Journal}, volume = {18}, year = {2023}, month = {MAR}, type = {Article}, abstract = {

The present study reports on the photocatalytic oxidation of butanols to butanal/butanone using thin film form of facet-dependent nano-Pd supported on commercial TiO2 under one-sun condition and demonstrates the generic nature. Pd-nanocube (Pd-NC(100)), Pd-truncated octahedron (Pd-TO (100) and (111)), polycrystalline (Pd-PC), and their counterparts with half-a-monolayer Pt-coated on Pd (0.5 theta(Pt)-Pd)) have been used as co-catalyst. A potentially scalable thin film form of Pd/TiO2 photocatalyst, prepared by drop-casting method, has been employed to study oxidation of n-butanol, 2-butanol, and iso-butanol to corresponding aldehyde/ketone. 100\% selectivity is demonstrated to respective aldehyde/ketone with any catalyst used in the present study with varying degree of butanols conversion by NMR. 0.5 theta(Pt)-Pd-TO/TiO2 shows the highest conversion of 2-butanol to butanone (13.6\% in 4 h). Continuous 10 h of reaction with the most active 0.5 theta(Pt)-Pd-TO/P25 catalyst demonstrates 31\% conversion of 2-butanol to butanone, and catalyst recyclability has been demonstrated. The present protocol can be scalable to large scales to maximize the conversion in direct sunlight. Due to its generic nature, the current method can also be applied to many other alcohols and substrate molecules.

}, keywords = {energy conversion, Nanomaterials, Oxidation, Photocatalysis, Sustainability}, issn = {1861-4728}, doi = {10.1002/asia.202201239}, author = {Salgaonkar, Kranti N. and Kale, Sandip R. and Nalajala, Naresh and Mansuri, Sayana and Gopinath, Chinnakonda S.} } @article {48291, title = {Short review on recent advances in porous adsorbents for separation of oxygen from atmospheric air}, journal = {Asia-Pacific Journal of Chemical Engineering}, volume = {18}, year = {2023}, month = {MAR}, type = {Review}, abstract = {

Pure oxygen demand is continuously increasing worldwide due to wide applications including medical and industrial. Pressure swing adsorption (PSA) is one of the promising techniques to separate O-2 from atmospheric air. The porous solid adsorbent is a key element in the PSA to trap nitrogen (N-2) and release O-2. Several adsorbents including low silica X (LSX), zeolite 5A, ion-exchanged LSX (Li-LSX, AgLi-LSX, Ca-LSX), Engelhard titanosilicate (Na-ETS-10, Ag-ETS-10), and SSZ-13 have been investigated for adsorption of N-2 from the air. This review article is a summarization of recent research work published on O-2 separation using different porous adsorbents via PSA. This review also emphasizes on the best porous sorbent for purification of O-2 by sorption of N-2 and Ar. The adsorption capacities with experimental conditions are also rigorously discussed. The review also proposed future trends and prospects for O-2 separation. This review will be helpful to choose remarkable adsorbent for the generation pure O-2.

}, keywords = {13X zeolite, adsorbent, ETS-10, oxygen, Separation}, issn = {1932-2135}, doi = {10.1002/apj.2896}, author = {Shrotri, Aadesh R. R. and Niphadkar, Prashant S. S. and Bokade, Vijay V. V. and Utgikar, Vivek P. P. and Nandanwar, Sachin U. U.} } @article {48297, title = {Size does matter: antibacterial activities and cytotoxic evaluation of polymorphic CuO nanostructures}, journal = {Journal of Materials Science}, volume = {58}, year = {2023}, month = {FEB}, pages = {2782-2800}, type = {Article}, abstract = {

Nanostructured materials play a significant role in antibacterial activities. However, understanding the geometrical influence at the nanoscale in terms of size- and shape-correlated physical properties on antibacterial activities is very essential. Herein, we report the antibacterial influence of various copper oxide nanostructures (CuO NS) such as nanoparticles (NPs) (\< 10 nm), nanospheres (NSs) (50-100 nm), and porous nanoflowers (NFs) (asymptotic to 350 nm). The XRD confirmed the crystalline nature of CuO NPs without impurities. The antibacterial activities of CuO NPs were investigated by the microplate dilution method and confocal laser scanning microscopic (CLSM) imaging. NPs having a diameter less than 10 nm exhibited significant damage to the bacterial cell membrane than NSs and NFs. Interestingly, NPs illustrated relatively low antibacterial activity against Gram-negative bacteria (Pseudomonas aeruginosa and Acinetobacter baumannii) than Gram-positive bacteria (Staphylococcus aureus and Staphylococcus epidermidis). Acinetobacter baumannii was found to be more susceptible to the NPs than other bacterial strains, attributed to its increased membrane permeability. The death phase was observed at a concentration of 15.6 mu g mL(-1) and 3.9 mu g mL(-1) for P. aeruginosa and A. baumannii, respectively, when treated with CuO NP after the 8 h of incubation. Similarly, for S. aureus and S. epidermidis, the death phase was observed at the concentration of 31.2 mu g mL(-1) and 250 mu g mL(-1), respectively. Furthermore, as the cell cytotoxicity measurements against human fibroblast L9239 cells revealed that CuO NPs were safe. The morphological and cell viability assay demonstrated 100\% cell survival, when treated with NPs and NSs (5, 10, and 25 mu g mL(-1)), signifies no cytotoxicity. Therefore, CuO nanoparticles can be used for clinical and therapeutic applications.

}, issn = {0022-2461}, doi = {10.1007/s10853-023-08157-4}, author = {Desai, Dnyanada G. and Navale, Govinda R. and Late, Dattatray J. and Dharne, Mahesh S. and Walke, Pravin S.} } @article {48724, title = {Sustainable and cleaner production of poly-gamma-glutamic acid (γ-PGA) biopolymer using floral waste and its anti-staling properties}, journal = {Journal of Cleaner Production}, volume = {425}, year = {2023}, month = {NOV }, pages = {138709}, type = {Article}, abstract = {

The framework of sustainable development (SD) hinges on 17 different ideals established by the United Nations. This call for SD can be addressed by the circular bio-economy concept, which not only ensures effective waste management but also encourages its valorization and repurposing, hence fostering both ecological and economic stability. One-third of the world{\textquoteright}s floral production is in jeopardy, and because there are no potential solutions for sustaining floral waste, it inevitably ends up in landfills and riverine systems, which is detrimental to the environment. Therefore, in the present study, floral waste that was destined for landfills or water bodies was productively valorized to poly gamma glutamic acid (gamma-PGA), a high value biopolymer, with a yield of 40 g/L and productivity of 1.6 g/L/h employing an L-glutamic acid (L-GA) independent feeding approach. When gamma-PGA was coated onto Vitis vinifera grapes, it exhibited excellent moisture retention, reduced microbial contamination, and preserved the grapes{\textquoteright} aesthetic characteristics and nutrient content. The weight loss study demonstrated that grapes coated with 1\% and 2\% gamma-PGA experienced significantly lower weight loss (13\% and 14\% respectively) compared to the control group (21.6\%). Moreover, a 5-min dip coating time proved to be the most effective in reducing weight loss to 12.43\%. Over a period of 14 days, the control group exhibited a remarkably high weight loss (41\%) in contrast to the treated group, which showed significantly lower weight loss (16\%). Our work is a fine example of how the circular bio-economy and waste valorization may be used to achieve the long-term objectives of sustainable development, economic stability, and food security.

}, keywords = {Bio-economy, Floral waste, L-GA independent, Poly-gamma-glutamic acid, Valorization}, issn = {0959-6526}, doi = {10.1016/j.jclepro.2023.138709}, author = {Nair, Pranav G. and Dharne, Mahesh S.} } @article {48819, title = {Tale of two waves: Delineating diverse genomic and transmission landscapes driving the COVID-19 pandemic in Pune, India}, journal = {Journal of Infection and Public Health}, volume = {16}, year = {2023}, month = {AUG}, pages = {1290-1300}, type = {Article}, abstract = {

Background: Modern response to pandemics, critical for effective public health measures, is shaped by the availability and integration of diverse epidemiological outbreak data. Tracking variants of concern (VOC) is integral to understanding the evolution of SARS-CoV-2 in space and time, both at the local level and global context. This potentially generates actionable information when integrated with epidemiological outbreak data.Methods: A city-wide network of researchers, clinicians, and pathology diagnostic laboratories was formed for genome surveillance of COVID-19 in Pune, India. The genomic landscapes of 10,496 sequenced samples of SARS-CoV-2 driving peaks of infection in Pune between December-2020 to March-2022, were determined. As a modern response to the pandemic, a {\textquoteleft}{\textquoteleft}band of five{\textquoteright}{\textquoteright} outbreak data analytics approach was used. This integrated the genomic data (Band 1) of the virus through molecular phylogenetics with key outbreak data including sample collection dates and case numbers (Band 2), demographics like age and gender (Band 3-4), and geospatial mapping (Band 5).Results: The transmission dynamics of VOCs in 10,496 sequenced samples identified B.1.617.2 (Delta) and BA(x) (Omicron formerly known as B.1.1.529) variants as drivers of the second and third peaks of infection in Pune. Spike Protein mutational profiling during pre and post-Omicron VOCs indicated differential rank ordering of high-frequency mutations in specific domains that increased the charge and binding properties of the protein. Time-resolved phylogenetic analysis of Omicron sub-lineages identified a highly divergent BA.1 from Pune in addition to recombinant X lineages, XZ, XQ, and XM. Conclusions: The band of five outbreak data analytics approach, which integrates five different types of data, highlights the importance of a strong surveillance system with high-quality meta-data for understanding the spatiotemporal evolution of the SARS-CoV-2 genome in Pune. These findings have important implica-tions for pandemic preparedness and could be critical tools for understanding and responding to future outbreaks.\& COPY; 2023 Published by Elsevier Ltd on behalf of King Saud Bin Abdulaziz University for Health Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

}, keywords = {COVID-19, Delta, Omicron, SARS-CoV-2 genomic surveillance, Variant of concern, Whole Genome Sequencing (WGS)}, issn = {1876-0341}, doi = {10.1016/j.jiph.2023.06.004}, author = {Niveditha, Divya and Khan, Soumen and Khilari, Ajinkya and Nadkarni, Sanica and Bhalerao, Unnati and Kadam, Pradnya and Yadav, Ritu and Kanekar, Jugal B. and Shah, Nikita and Likhitkar, Bhagyashree and Sawant, Rutuja and Thakur, Shikha and Tupekar, Manisha and Nagar, Dhriti and Rao, Anjani G. and Jagtap, Rutuja and Jogi, Shraddha and Belekar, Madhuri and Pathak, Maitreyee and Shah, Priyanki and Ranade, Shatakshi and Phadke, Nikhil and Das, Rashmita and Joshi, Suvarna and Karyakarte, Rajesh and Ghose, Aurnab and Kadoo, Narendra and Shashidhara, L. S. and Monteiro, Joy Merwin and Shanmugam, Dhanasekaran and Raghunathan, Anu and Karmodiya, Krishanpal} } @article {48758, title = {Thermally activated delayed fluorescent solvent-free organic liquid hybrids for tunable emission applications}, journal = {Chemistry-An Asian Journal}, volume = {18}, year = {2023}, month = {JUL }, type = {Article}, abstract = {

The synthetic feasibility and excellent luminescence features of organic molecules attracted much attention and were eventually found useful in lighting applications. In this context, a solvent-free organic liquid having attractive thermally activated delayed fluorescence features in bulk along with high processability has prime importance. Herein, we report a series of naphthalene monoimide-based solvent-free organic liquids exhibiting cyan to red thermally activated delayed fluorescence with luminescence quantum yields up to 80\% and lifetimes between 10 to 45 mu s. An effective approach explored energy transfer between liquid donors with various emitters exhibiting tunable emission colors, including white. The high processability of liquid emitters improved the compatibility with polylactic acid and was used for developing multicolor emissive objects using 3D printing. Our demonstration of the thermally activated delayed fluorescence liquid will be much appreciated as a processable alternate emissive material suitable for large-area lighting, display, and related applications.

}, keywords = {3D printing, Energy Transfer, OLED, Organic Liquids, TADF}, issn = {1861-4728}, doi = {10.1002/asia.202300276}, author = {Nidhankar, Aakash D. D. and Goudappagouda and Kothavade, Premkumar D. and Dongre, Sangram D. and Veer, Sairam Dnyaneshwar and Dash, Soumya Ranjan and Rajeev, Kavya and Unni, K. N. Narayanan and Shanmuganathan, Kadhiravan and Babu, Sukumaran Santhosh} } @article {48306, title = {Trehalose transporter-like gene diversity and dynamics enhances stress response and recovery in Helicoverpa armigera}, journal = {Gene}, volume = {862}, year = {2023}, month = {APR}, pages = {147259}, type = {Article}, abstract = {

Trehalose is a primary sugar and its distribution across the insect body, regulated by trehalose transporters (TRETs), is essential for sugar metabolism and energy homeostasis. The large diversity of Tret-like sugar trans-porters (ST), belonging to SLC2A transporter family, in polyphagous insects probably contributes to their extremely adaptive nature. We aim to study spatio-temporal expression dynamics and functional relevance of ST transcript variants in the lepidopteran model organism, Helicoverpa armigera. Identification of 69 putative Tret-like HaST transcript variants from databases and their digital gene expression analysis indicated tissue and development-specific expression patterns. Phylogenetic and sequence similarity network analysis of HaSTs signify evolutionary divergence, while motif and structure analysis depicted conserved signatures. In vitro gene expression validation for selected genes depicts that HaST09 and 69 are fat body and haemolymph-specific. While, HaST06, 30, 36 and 57 are developmental stage or sex-specific. HaST69 has high expression in the haemolymph of fifth instar larvae. In the presence of trehalose metabolism inhibitors and abiotic stress, HaSTs expression show dysregulation, indicating their possible association with trehalose metabolism and stress re-covery. In vivo gene silencing of HaST69 resulted in reduced trehalose accumulation in the insect body, sug-gesting its plausible role in sugar metabolism. The overall understanding of HaST diversity and expression dynamics highlights their putative roles in sugar transport during adaptation and stress recovery of insects.

}, keywords = {Gene expression, Helicoverpa armigera, Stress, Transporter-like, trehalose}, issn = {0378-1119}, doi = {10.1016/j.gene.2023.147259}, author = {Tellis, Meenakshi B. and Chaudhari, Bhagyashri Y. and Deshpande, Shweta V. and Nikam, Sanika V. and Barvkar, Vitthal T. and Kotkar, Hemlata M. and Joshi, Rakesh S.} } @article {48455, title = {Ultrafast spectroscopy of plasmons and free carriers in 2D MXenes}, journal = {Advanced Materials}, volume = {35}, year = {2023}, month = {FEB}, type = {Article}, abstract = {

2D MXenes have diverse and chemically tunable optical properties that arise from an interplay between free carriers, interband transitions, and plasmon resonances. The nature of photoexcitations and their dynamics in three different members of the MXene family, Ti3C2, Mo2Ti2C3, and Nb2C, are investigated using two complementary pump-probe techniques, transient optical absorption, and time-resolved terahertz (THz) spectroscopy. Measurements reveal pronounced plasmonic effects in the visible and near-IR in all three. Optical excitation, with either 400 or 800 nm pulses, results in a rapid increase in lattice temperature, evidenced by a pronounced broadening of the plasmon mode that presents as a plasmon bleach in transient absorption measurements. Observed kinetics of plasmon bleach recovery provide a means to monitor lattice cooling. Remarkably slow cooling, proceeding over hundreds of picoseconds to nanoseconds time scales, implies MXenes have low thermal conductivities. The slowest recovery kinetics are observed in the MXene with the highest free carrier density, viz. Ti3C2, that supports phonon scattering by free carriers as a possible mechanism limiting thermal conductivity. These new insights into photoexcitation dynamics can facilitate their applications in photothermal solar energy conversion, plasmonic devices, and even photothermal therapy and drug delivery.

}, keywords = {2D properties, MXenes, Optical properties, plasmons, ultrafast spectroscopy}, issn = {0935-9648}, doi = {10.1002/adma.202208659}, author = {Colin-Ulloa, Erika and Fitzgerald, Andrew and Montazeri, Kiana and Mann, Javery and Natu, Varun and Ngo, Ken and Uzarski, Joshua and Barsoum, Michel W. and Titova, Lyubov V.} } @article {48835, title = {Unprecedented energy storage in metal-organic complexes via constitutional isomerism}, journal = {Chemical Science}, volume = {14}, year = {2023}, month = {JUN}, pages = {6383-6392}, type = {Article}, abstract = {

The essence of any electrochemical system is engraved in its electrical double layer (EDL), and we report its unprecedented reorganization by the structural isomerism of molecules, with a direct consequence on their energy storage capability. Electrochemical and spectroscopic analyses in combination with computational and modelling studies demonstrate that an attractive field-effect due to the molecule{\textquoteright}s structural-isomerism, in contrast to a repulsive field-effect, spatially screens the ion-ion coulombic repulsions in the EDL and reconfigures the local density of anions. In a laboratory-level prototype supercapacitor, those with beta-structural isomerism exhibit nearly 6-times elevated energy storage compared to the state-of-the-art electrodes, by delivering similar to 535 F g(-1) at 1 A g(-1) while maintaining high performance metrics even at a rate as high as 50 A g(-1). The elucidation of the decisive role of structural isomerism in reconfiguring the electrified interface represents a major step forward in understanding the electrodics of molecular platforms.

}, issn = {2041-6520}, doi = {10.1039/d3sc01692g}, author = {Kottaichamy, Alagar Raja and Deebansok, Siraprapha and Deng, Jie and Nazrulla, Mohammed Azeezulla and Zhu, Yachao and Bhat, Zahid Manzoor and Devendrachari, Mruthyunjayachari Chattanahalli and Vinod, Chathakudath Prabhakaran and Kotresh, Harish Makri Nimbegondi and Fontaine, Olivier and Thotiyl, Musthafa Ottakam} } @article {48746, title = {Visible-light-active unsymmetrical squaraine dyes with 1 V of open-circuit voltage for dye-sensitized solar cells}, journal = {ChemPhotoChem}, volume = {7}, year = {2023}, month = {MAY}, type = {Article}, abstract = {

A series of alkyl-group-functionalized, aniline- and indoline-donor-based, unsymmetrical visible-light-active squaraine dyes, AM1-3, were designed and synthesized. Dye-sensitized solar cell (DSSC) devices were fabricated with both I-/I-3(-) and [Cu(tmby)(2)](+/2+) electrolytes. DSSC devices sensitized with the AM1 and AM2 dyes showed relatively high-power conversion efficiency of 7.44 \% and 7.22 \%, respectively with I-/I-3(-) in the absence of chenodeoxycholic acid (CDCA) than those of the AM3 dye (5.41 \%). The [Cu(tmby)(2)](+/2+) electrolyte along with poly(3,4-ethylenedioxythiophene) (PEDOT) as cathode material showed excellent open-circuit potentials (V-OC) of 1030, 1025, and 1001 mV with the DSSC efficiency of 8.05 \%, 7.96 \%, and 5.84 \%, respectively, for the AM1, AM2, and AM3 dyes in the absence of CDCA. Here, the AM1 dye exhibited the maximum DSSC efficiency of 8.05 \% and V-OC of 1030 mV, which is the highest obtained efficiency and V-OC for the visible-light active zwitterionic unsymmetrical-squaraine dye with copper-based electrolyte.

}, keywords = {Cu electrolytes, dihedral angle, Dye-sensitized solar cells, open circuit voltage, squaraine dyes}, issn = {2367-0932}, doi = {10.1002/cptc.202200328}, author = {Singh, Amrita and Kumar Singh, Ambarish and Dixit, Ruchi and Vanka, Kumar and Krishnamoorthy, Kothandam and Nithyanandhan, Jayaraj} }