@article { ISI:000234202200037, title = {3-Aminopropyltriethoxysilyl functionalized Na-Al-MCM-41 solid base catalyst for selective preparation of 2-phenylpropionitrile from phenylacetonitrile}, journal = {Applied Catalysis A-General}, volume = {292}, year = {2005}, month = {SEP}, pages = {344-353}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Various solid base catalysts have been prepared by ion exchange of zeolites and Na-Al-MCM-41 and by organosilane grafting over mesoporous materials. Base catalysts thus synthesized were studied in the selective monomethylation of phenylacetonitrile (PAN) to 2-phenylpropionitrile (2-PPN) using dimethylcarbonate (DMC) as an alkylating agent in a Parr autoclave at a temperature ranging between 443 and 473 K and at autogenously developed pressure. NH2-Na-Al-MCM-41 (30) showed a high activity, and the optimum loading of 3-aminopropyltriethoxysilyl (3-APTES) was found to be 1.35 mmol g(-1), being consistent with the structural characterization. Co-condensation of 3-APTES, tetraethylorthosilicate (TEOS) and sodiumaluminate in the presence of surfactant provides a material with uniformly distributed basic sites responsible for high activity in the selective monomethylation of phenylacetonitrile. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {2-phenylpropionitrile, base catalysis, dimethylcarbonate, monomethylation, NH2-Na-Al-MCM-41, phenylacetonitrile}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.06.013}, author = {Venkatesan, C. and Chidambaram, M. and Singh, A. P.} } @article { ISI:000233685400030, title = {Analysis of a gas-liquid-liquid-solid catalytic reaction: kinetics and modeling of a semibatch slurry reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {44}, number = {25}, year = {2005}, note = {Joint 5th International Symposium on Catalysis in Multiphase Reactors/4th International Symposium on Multifunctional Reactors, Portoroz-Portorose, SLOVENIA, JUN 15-18, 2005}, month = {DEC}, pages = {9586-9593}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydrogenation of aniline to cyclohexylamine was studied in a gas-liquid-liquid-solid tetraphase system using cyclohexane and water as two immiscible liquid phases and ruthenium on alumina (2\% Ru/Al2O3) as the catalyst. In addition to the higher catalytic activity with respect to the conventional three-phase system, the novel four-phase system was highly efficient in catalyst-product separation. Experimental data on concentration-time as well as hydrogen-consumption-time profiles were obtained to study the effect of concentration of aniline, catalyst loading, and the partial pressure of hydrogen. A detailed analysis of gas-liquid, liquid-liquid, liquid-solid, and intraparticle mass transfer was carried out using initial rate data to ensure the kinetic regime. On the basis of these data, several rate equations were evaluated to select a kinetic model. The kinetic parameters were estimated over a temperature range of 378-418 K by fitting the integral batch reactor data. A rate model considering adsorption of hydrogen on the catalyst surface followed by reaction with the liquid-phase components as the rate-limiting step was found to give the best fitting of the experimental concentration-time as well as the hydrogen-consumption-time data at different initial sets of reaction conditions. The activation energies, heat of adsorption, and entropy of adsorption were also evaluated.

}, issn = {0888-5885}, doi = {10.1021/ie0502739}, author = {Roy, D. and Chaudhari, Raghunath V.} } @conference { ISI:000234856700033, title = {Arrhythmia classification using local Holder exponents and support vector machine}, booktitle = {1st International Conference on Pattern Recognition and Machine Intelligence}, series = {LECTURE NOTES IN COMPUTER SCIENCE}, volume = {3776}, year = {2005}, note = {1st International Conference on Pattern Recognition and Machine Intelligence, Statist Inst Kolkata, Kolkata, INDIA, DEC 20-22, 2005}, month = {DEC}, pages = {242-247}, publisher = {Springer-Verlag Berlin, Heidelberger Platz 3, D-14197 Berlin, Germany}, organization = {Springer-Verlag Berlin, Heidelberger Platz 3, D-14197 Berlin, Germany}, address = { Statist Inst. Kolkata, India}, abstract = {

We propose a novel hybrid Holder-SVM detection algorithm for arrhythmia classification. The Holder exponents are computed efficiently using the wavelet transform modulus maxima (WTMM) method. The hybrid system performance is evaluated using the benchmark MIT-BIH arrhythmia database. The implemented model classifies 160 of Normal sinus rhythm, 25 of Ventricular bigeminy, 155 of Atrial fibrillation and 146 of Nodal (A-V junctional) rhythm with 96.94\% accuracy. The distinct scaling properties of different types of heart rhythms may be of clinical importance.

}, isbn = {3-540-30506-8}, issn = {0302-9743}, author = {Joshi, Aniruddha and Rajshekhar and Chandran, S. and Phadke, S. and Jayaraman, Valadi K. and Kulkarni, B. D.}, editor = {Pal, S. K. and Bandyopadhyay, Sanjoy and Biswas, S.} } @article { ISI:000232981200014, title = {Aziridine carboxylate from D-glucose: synthesis of polyhydroxylated piperidine, pyrrolidine alkaloids and study of their glycosidase inhibition}, journal = {Organic \& Biomolecular Chemistry}, volume = {3}, number = {20}, year = {2005}, month = {OCT}, pages = {3720-3726}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The D-glucose derived aziridine carboxylate 5 was obtained from (E)-ethyl-6-bromo-1,2-O-isopropylidene-3-O-benzyl-5-deoxy-alpha-D-xylo-5 -eno-heptofuranuronate 4 through conjugate addition of benzylamine and in situ intramolecular nucleophilic expulsion of bromine. The regioselective aziridine ring-opening, using water as a nucleophile, resulted in the alpha-hydroxy-beta-aminoester 6, which was exploited in the synthesis of six and five membered azasugars 1b/1c and 2b/2c, respectively The glycosidase inhibitory activity of the title compounds was evaluated.

}, issn = {1477-0520}, doi = {10.1039/b509216g}, author = {Dhavale, Dilip D. and Kumar, K. S. A. and Chaudhari, Vinod D. and Sharma, T. and Sabharwal, Sushma G. and PrakashaReddy, J.} } @article { ISI:000233129500064, title = {Biocompatibility of gold nanoparticles and their endocytotic fate inside the cellular compartment: a microscopic overview}, journal = {Langmuir}, volume = {21}, number = {23}, year = {2005}, month = {NOV}, pages = {10644-10654}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Macrophages are one of the principal immune effector cells that play essential roles as secretory, phagocytic, and antigen-presenting cells in the immune system. In this study, we address the issue of cytotoxicity and immunogenic effects of gold nanoparticles on RAW264.7 macrophage cells. The cytotoxicity of gold nanoparticles has been correlated with a detailed study of their endocytotic uptake using various microscopy tools such as atomic force microscopy (AFM), confocal-laser-scanning microscopy (CFLSM), and transmission electron microscopy (TEM). Our findings suggest that Au(0) nanoparticles are not cytotoxic, reduce the production of reactive oxygen and nitrite species, and do not elicit secretion of proinflammatory cytokines TNF-alpha and IL1-, making them suitable candidates for nanomedicine. AFM measurements suggest that gold nanoparticles are internalized inside the cell via a mechanism involving pinocytosis, while CFLSM and TEM studies indicate their internalization in lysosomal bodies arranged in perinuclear fashion. Our studies thus underline the noncytotoxic, nonimmunogenic, and biocompatible properties ofgold nanoparticles with the potential for application in nanoimmunology, nanomedicine, and nanobiotechnology.

}, issn = {0743-7463}, doi = {10.1021/la0513712}, author = {Shukla, Ravi and Bansal, Vipul and Chaudhary, Manakshi and Basu, Atanu and Bhonde, Ramesh R. and Sastry, Murali} } @article { ISI:000229484600029, title = {Carbohydrate-based approach for the total synthesis of strictifolione}, journal = {Tetrahedron Letters}, volume = {46}, number = {23}, year = {2005}, month = {JUN}, pages = {4073-4075}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A chiral pool approach starting with D-glucose, using the Yamaguchi protocol and a Z-selective HWE reaction followed by lactonization, has been applied to execute the total synthesis of strictifolione. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {D-Glucose, double elimination, Horner-Wadsworth-Emmons reaction, lactonization, strictifolione, Yamaguchi protocol}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.04.031}, author = {Ramana, C. V. and Raghupathi, N. and Gurjar, M. K. and Chorghade, Mukund S.} } @article { ISI:000228226800025, title = {Carbon-free dry reforming of methane to syngas over NdCoO3 perovskite-type mixed metal oxide catalyst}, journal = {Catalysis Letters}, volume = {100}, number = {3-4}, year = {2005}, month = {APR}, pages = {271-276}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

CoNdOx (Co/Nd = 1) is a highly promising catalyst for the carbon-free CO2 reforming of methane. Influence of the Co/Nd ratio on the catalyst performance in the CO2 reforming and also on the crystalline phases and reduction by temperature programmed reduction (TPR) of the CoNdOx catalyst has also been investigated. The CoNdOx (CoNd = 1.0) catalyst consisted of mainly NdCoO3 perovskite- type mixed metal oxide and it showed not only a high resistance to carbon formation at different process conditions ( viz. temperature = 750 - 900 degrees C and gas hourly space velocity (GHSV) = 10000 - 50000 cm(3) g(-1) h(-1)) but also high activity and selectivity in the CO2 reforming process. The high resistance to carbon formation for this catalyst is attributed mostly to strong metal (Co degrees) - support (Nd2O3) interactions.

}, keywords = {CO2 reforming of methane to syngas, CoNdOx catalyst, NdCoO3 perovskite, resistance to carbon formation in CO2 reforming}, issn = {1011-372X}, doi = {10.1007/s10562-004-3467-0}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Mamman, Ajit Singh and Joshi, Upendra A.} } @article { ISI:000233432200006, title = {Carbonylation of alkynes, alkenes and alcohols using metal complex catalysts}, journal = {Catalysis Surveys from Asia}, volume = {9}, number = {3}, year = {2005}, month = {SEP}, pages = {193-205}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Carbonylation of olefins, alcohols and halides using homogeneous as well as heterogeneous catalysts has been discussed. Highlights of contributions on the activity, selectivity and stability of catalysts for carbonylation reactions are discussed. Kinetics and mechanism including characterization of the intermediate catalytic species has also been reviewed. The performance of anchored Pd complexes on mesoporous supports (MCM-41 and MCM-48), water soluble Pd complexes and supported Pd catalysts in carbonylation of aryl alcohols and olefins has been discussed in the context of catalyst-product separation. Some aspects of kinetic modelling and reaction engineering of these multiphase catalytic reactions have also been reviewed.

}, keywords = {Carbonylation, catalysis, Heterogenization, homogeneous, Palladium}, issn = {1571-1013}, doi = {10.1007/s10563-005-7556-x}, author = {Sarkar, B. R. and Chaudhari, Raghunath V.} } @article { ISI:000227421800005, title = {Cataloguing Indian biota - Response}, journal = {Current Science}, volume = {88}, number = {4}, year = {2005}, month = {FEB}, pages = {532-533}, publisher = {CURRENT SCIENCE ASSN}, address = {C V RAMAN AVENUE, PO BOX 8005, BANGALORE 560 080, INDIA}, issn = {0011-3891}, author = {Chavan, V. and Watve, A. V. and Rane, N. S. and Krishnan, S.} } @article { ISI:000236923400014, title = {Catalytic transesterification of beta-ketoesters with zeolite H-FER under solvent free conditions}, journal = {Arkivoc}, volume = {13}, number = {13}, year = {2005}, month = {MAY}, pages = {162-168}, publisher = {ARKAT USA INC}, type = {Article}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

Zeolite H-FER catalyzes the transesterification of beta-ketoesters with variety of alcohols under solvent-less condition in excellent yields. The catalyst can be reused without any loss of activity.

}, keywords = {ferrierite, transesterification, zeolite}, issn = {1424-6376}, author = {Chavan, Subhash P. and Pasupathy, K. and Shengule, S. and Shinde, V. and Anand, R.} } @article { ISI:000232860300043, title = {Chiral 2-C-methylene glycosides and carbohydrate-derived pyrano[2,3-b][1]benzopyrans: synthesis via InCl3 catalyzed stereoselective ferrier rearrangement of 2-C-acetoxymethyl glycal derivatives}, journal = {Tetrahedron Letters}, volume = {46}, number = {46}, year = {2005}, month = {NOV}, pages = {8047-8051}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

2-C-Acetoxymethyl glycal derivatives react with aliphatic alcohols in the presence of InCl3 (30 mol \%) to furnish the corresponding 2-C-methylene glycosides in excellent yields and with exclusive alpha-selectivity except for the methyl 2-C-methylene glycosides, which are formed in similar to 2:1 anomeric ratio in favour of the alpha-anomer. The reaction of 2-C-acetoxyglycals with phenols, however, produces the corresponding chiral carbohydrate-derived pyranobenzopyran derivatives via initial Ferrier rearrangement followed by tandem cyclization in excellent yields and moderate to high stereoselectivities in favour of the corresponding 10a-R-pyrano[2,3-b][1]benzopyran derivatives. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {2-C-methylene glycoside, InCl3, pyranobenzopyran, Stereoselective}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.09.059}, author = {Ghosh, R. and Chakraborty, A. and Maiti, D. K. and Puranik, Vedavati G.} } @article { ISI:000232157000036, title = {Cloning, preparation and preliminary crystallographic studies of penicillin V acylase autoproteolytic processing mutants}, journal = {Acta Crystallographica Section F-Structural Biology and Crystallization Communications}, volume = {61}, number = {1}, year = {2005}, month = {JAN}, pages = {124-127}, publisher = {BLACKWELL PUBLISHING}, type = {Article}, address = {9600 GARSINGTON RD, OXFORD OX4 2DQ, OXON, ENGLAND}, issn = {1744-3091}, doi = {10.1107/S1744309104031227}, author = {Chandra, P. M. and Brannigan, James A. and Prabhune, Asmita and Pundle, A. and Turkenburg, J. P. and Dodson, Guy G. and Suresh, C. G.} } @article { ISI:000226743800002, title = {Computational study of a single-phase flow in packed beds of spheres}, journal = {AICHE Journal}, volume = {51}, number = {2}, year = {2005}, month = {FEB}, pages = {365-378}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Packed-bed reactors are widely used in petrochemical, fine chemical, and pharmaceutical industries. Detailed knowledge of interstitial flow in the void space of such packed-bed reactors is essential for understanding the heat and mass transfer characteristics. In this paper, fluid flow through the array of spheres was studied using the unit-cell approach, in which different periodically repeating arrangements of particles such as simple cubical, 1-D rhombohedral, 3-D rhombohedral, and face-centered cubical geometries were considered. Single-phase flow through these geometries was simulated using computational fluid dynamics (CFD). The model was first validated by comparing predicted results with published experimental and computational results. The validated model was further used to study the effect of particle arrangement/orientation on velocity distribution and heat transfer characteristics. The simulated results were also used to understand and to quantify, relative contributions of surface drag and form drag in overall resistance to the flow through packed-bed reactors. The model and the results presented here would be useful in elucidating the role of microscopic flow structure on mixing and other transport processes occurring in packed-bed reactors. (C) 2005 American Institute of Chemical Engineers.

}, keywords = {CFD, drag, heat transfer, packed bed, packing arrangement}, issn = {0001-1541}, doi = {10.1002/aic.10314}, author = {Gunjal, P. R. and Ranade, V. V. and Chaudhari, Raghunath V.} } @article { ISI:000232742000009, title = {Controlled growth of silicon nanocrystallites in silicon oxide matrix using 150 MeV Ag ion irradiation}, journal = {Nuclear Instruments \& Methods in Physics Research Section B-Beam Interactions with Materials and Atoms}, volume = {239}, number = {3}, year = {2005}, month = {SEP}, pages = {185-190}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We report the synthesis of silicon nanocrystals grown in silicon oxide matrix by swift heavy ion irradiation. Thin films of silicon oxide (SiO(x)) are irradiated with 150 MeV silver ions at fluence varying from 5 x 10(11) to 1 x 10(13) ions/cm(2). The variation in the properties of silicon nanocrystals embedded in silicon oxide with varying fluence is studied. The energy of the photoluminescence peak corresponding to the silicon nanocrystals is found to be red shifted with increasing fluence. The trends in the broadening of the X-ray diffraction peak with decreasing fluence supports the controlled growth of silicon nanocrystals in silicon oxide matrix. The crystallite size of nanoclusters of silicon is seen to increase with increasing fluence. The results are discussed in view of the structural transformation, in SiO(x) matrix, caused by swift heavy ion irradiation. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {oxide matrix, silicon nanocrystallites, swift heavy ion irradiation}, issn = {0168-583X}, doi = {10.1016/j.nimb.2005.04.069}, author = {Chaudhari, P. S. and Bhave, T. M. and Pasricha, R. and Singh, F. and Kanjilal, D. and Bhoraskar, S. V.} } @article { ISI:000227299100006, title = {Destructive adsorption of methyl parathion over nanocrystalline MgO}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {44}, number = {2}, year = {2005}, month = {FEB}, pages = {251-255}, publisher = {NATL INST SCIENCE COMMUNICATION}, type = {Article}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

Destructive adsorption of methyl parathion (MP) has been investigated over few transition metal oxides and alkali earth metal oxides. Performance of alkaline earth oxides have been found to be better than transition metal oxides and best performance has been shown by aerogel method prepared nanocrystalline AP-MgO. The AP-MgO powder has been characterized by XRD, AFM and BET surface area measurements. Destructive adsorption of MP over AP-MgO has been compared with that of activated carbon. Both are found to adsorb methyl parathion effectively. An IR investigation of the surface of treated AP-MgO and activated carbon reveals that activated carbon adsorbs methyl parathion as such in the molecular form and AP-MgO adsorbs it destructively.

}, issn = {0376-4710}, author = {Reddy, V. S. and RadheShyam, A. and Dwivedi, Reena and Gupta, R. K. and Chumbhale, Vilas R. and Prasad, R.} } @article { ISI:000227246800051, title = {Diastereoselective amidoalkylation of (3S,7aR)-6-benzyl-7-hydroxy-3-phenyltetra-hydro-5H-imidazo[1,5-c][1, 3]thiazol-5-one : a short and highly efficient synthesis of (+)-biotin}, journal = {Journal of Organic Chemistry}, volume = {70}, number = {5}, year = {2005}, month = {MAR}, pages = {1901-1903}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A short and highly efficient synthesis of W-biotin in 10 steps with 20\% overall yield has been achieved from L-cysteine involving amidoalkylation of hydroxy imidazothiazolone 4 via an acyliminium ion intermediate to furnish C-7-substituted imidazothiazolones 5b as the key step.

}, issn = {0022-3263}, doi = {10.1021/jo0488107}, author = {Chavan, Subhash P. and Chittiboyina, A. G. and Ravindranathan, T. and Kamat, Subhash K. and Kalkote, Uttam R.} } @article { ISI:000226083500005, title = {Dynamics of drop impact on solid surface: experiments and VOF simulations}, journal = {AICHE Journal}, volume = {51}, number = {1}, year = {2005}, month = {JAN}, pages = {59-78}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

The process of spreading/recoiling of a liquid drop after collision with a flat solid surface was experimentally, and computationally studied to identify the key issues in spreading of a liquid drop oil a solid surface. The long-term objective of this study is to gain an insight in the phenomenon of wetting of solid particles in the trickle-bed reactors. Interaction of a falling liquid drop with a solid surface (impact, spreading, recoiling, and bouncing) was studied using a high-speed digital camera. Experimental data oil dynamics of a drop impact on flat surfaces (glass and Teflon) are reported over a range of Reynolds numbers (550-2500) and Weber numbers (2-20). A computational fluid dynamics (CFD) model, based on the volume of fluid (VOF) approach, was used to simulate drop dynamics on the flat sufaces. The experimental results were compared with the CFD simulations. Simulations showed reasonably good agreement with the experimental data. A VOF-based computational model was able to capture key features of the interaction of a liquid drop with solid surfaces. The CFD simulations provide information about finer details of drop interaction with the solid surface. Information about gas-liquid and liquid-solid drag obtained from VOF simulations would be useful for CFD modeling of trickle-bed reactors. (C) 2004 American Institute of Chemical Engineers.

}, keywords = {CFD, drop impact, recoiling, spreading, trickle bed, VOF}, issn = {0001-1541}, doi = {10.1002/aic.10300}, author = {Gunjal, P. R. and Ranade, V. V. and Chaudhari, Raghunath V.} } @article { ISI:000229127000022, title = {Effect of 2-(2-pyridyl)azole-based ancillary ligands (L1-4) on the electrophilicity of the nitrosyl function in [Ru-II(trpy)(L1-4)(NO)](3+) [trpy=2,2 {\textquoteleft}: 6 {\textquoteleft},2 {\textquoteleft}{\textquoteright}-terpyridine]. synthesis, structures, and spectroscopic, electrochemical, and kinetic aspects}, journal = {Inorganic Chemistry}, volume = {44}, number = {10}, year = {2005}, month = {MAY}, pages = {3499-3511}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Ruthenium nitrosyl complexes [Ru(trpy)(L1-4)(NO)](3+) (13-16) [trpy = 2,2{\textquoteright}:6{\textquoteright},2"-terpyridine, L-1 = 2-(2-pyridyl)-benzoxazole, L-2 = 2-(2-pyridyl)benzthiazole, L-3 = 2-(2-pyridyl)benzimidazole, L-4 = 1-methyl-2-(2-pyridyl)-1H-benzimidazole] were obtained in a stepwise manner starting from [Ru-II(trpy)(L1-4) (Cl)]ClO4 (1-4) \→ [Ru-II(trpy)(L1-4) (H2O)](ClO4)(2) (5-8) \→ [Ru-II(trpy)(L1-4) (NO2)ClO4 (9-12) \→ [Ru-II(trpy)(L-1,L-2,L-4) (NO)](ClO4)(3) (13, 14, 16)/[Ru-II(trpy)(L-3) (NO)](Cl)(4))(2)(NO3) (15). Crystal structures of 1, 2, 4, 9, 12, 13, 15, and 16 established the stereoretentive nature of the transformation processes. Though the complexes of L1, L3, and L 4 were isolated in the isomeric form A (π-acceptor trpy and azole ring in the equatorial plane and the pyridine and chloride donors in the axial positions), complexes of L 2 preferentially stabilized in form B (trpy and pyridine in the equatorial plane and the azole ring and chloride donors in the axial positions). The v(NO) stretching frequency varied in the range of 1957-1932 cm(-1), 13 \&MGT; 14 \&MGT; 15 \> 16, primarily depending on the electronic aspects of L as well as the isomeric structural forms. The coordinated nitrosyl function underwent successive reductions of [Ru-II-NO+](3+) \→ [Ru-II-NO\•](2+) and [Ru-II-NO\•](2+) - [Ru-II-NO-](+), and the first reduction potential follows the order 14 \> 13 \&MGT; 15 \≈ 16. The nearly axial EPR spectra having nitrogen hyperfine splittings (A \≈ 26 G) at 77 K of 13(-)-16(-) with (g) \≈ 2.0 established that the reduction process is largely centered around the nitrosyl function. Despite an appreciably high v(NO), the complexes were found to be unusually stable even in the aqueous medium. They transformed slowly and only partially into the corresponding nitro derivatives in H2O (k \≈ 10(-4) s(-1) and K = 0.4-3.8). The chloro (1-4), aqua (5-8), and nitro (9-12) derivatives displayed reasonably strong emissions near 700 nm at 77 K (φ = 10(-1)-10(-2)). The aqua derivative 7 was found to interact with the calf thymus and the circular form of p-Bluescript SK DNA.

}, issn = {0020-1669}, doi = {10.1021/ic048184w}, author = {Chanda, N. and Paul, D. and Kar, S. and Mobin, Shaikh M. and Datta, Anindya and Puranik, Vedavati G. and Rao, K. K. and Lahiri, Goutam Kumar} } @article { ISI:000226332600017, title = {Efficient stereoselective synthesis of (2S,4S,5R)-(-)- and (2R,4R,5S)-(+)-bulgecinine}, journal = {Tetrahedron Letters}, volume = {46}, number = {3}, year = {2005}, month = {JAN}, pages = {439-441}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short synthetic route to (-)-and (+)-bulgecinine, the amino acid moiety of the bulgecins was achieved from the readily available nonchiral pool starting material cis-2-butene-1,4-diol in which a Claisen orthoester rearrangement and a Sharpless asymmetric dihydroxylation were used as the key steps. (C) 2004 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2004.11.101}, author = {Chavan, Subhash P. and Praveen, C. and Sharma, P. and Kalkote, Uttam R.} } @article { ISI:000233825900101, title = {Enhancement of double-layer capacitance behavior and its electrical conductivity in layered poly (3, 4-ethylenedioxythiophene)-based nanocomposites}, journal = {Applied Physics Letters}, volume = {87}, number = {24}, year = {2005}, month = {DEC}, pages = {243511}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

In this letter, we report on the enhanced double-layer capacitance of a layered poly (3, 4-ethylene dioxythiophene) PEDOT-MoO3 nanocomposite, which has been synthesized by a novel microwave irradiation method. The x-ray photoelectron spectroscopy analysis shows the changes in electron density and the shift in binding energy suggesting charge transfer from sulfur atoms upon PEDOT intercalation between MoO3 layers. The room-temperature conductivity for the PEDOT-MoO3 composite is found to be 1.82x10(-1) S cm(-1), which is four orders of magnitude higher than that of the pristine oxide (3.78x10(-5) S cm(-1)). The enhanced double-layer capacitance of the PEDOT-MoO3 nanocomposite (similar to 300 F g(-1)) compared to that (similar to 40 mF g(-1)) of pristine MoO3 is attributed to higher electronic conductivity, enhanced bidimensionality, and increase in surface area of the nanocomposite.

}, issn = {0003-6951}, doi = {10.1063/1.2140468}, author = {Murugan, A. Vadivel and Viswanath, A. K. and Campet, Guy and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000226995900011, title = {Entrapment of poly(3,4-ethylenedioxythiophene) between VS2 layers to form a new organic-inorganic intercalative nanocomposite}, journal = {Journal of Materials Chemistry}, volume = {15}, number = {8}, year = {2005}, month = {JAN}, pages = {902-909}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Here we report the synthesis and characterization of a new class of nanocomposite by direct in situ oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT) with VS2 as a host material in the presence of an external oxidizing agent. Upon intercalation, the interlayer spacing of VS2 expands from 5.71 Angstrom to 14.01 Angstrom, followed by exfoliation and a restacking process facilitating expansion of the lattice in a direction perpendicular to the dichalcogenide layers. This change in interlayer separation is consistent with the existence of two phases of organic and inorganic species in the nanocomposites corresponding to the intercalation of PEDOT in the VS2 framework. The resulting nanocomposite is characterized by thermal analysis (TGA), X-ray diffraction, FTIR, SEM, TEM, and four-probe electrical conductivity measurements. The application potential of the nanocomposite as a cathode material for rechargeable lithium batteries is also demonstrated by the electrochemical intercalation of lithium into the PEDOT-VS2 nanocomposite, where a significant enhancement in the discharge capacity is observed (similar to130 mA h g(-1)) compared to that (80 mA h g(-1)) for pristine VS2.

}, issn = {0959-9428}, doi = {10.1039/b414922j}, author = {Murugan, A. Vadivel and Quintin, M. and Delville, M. H. and Campet, Guy and Vijayamohanan, K.} } @article { ISI:000226424000029, title = {Epoxidation of styrene by anhydrous hydrogen peroxide over boehmite and alumina catalysts with continuous removal of the reaction water}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {227}, number = {1-2}, year = {2005}, month = {MAR}, pages = {217-222}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Boehmite and alumina (obtained from the boehmite by its calcination at different temperatures 300-900degreesC) are active and stable catalysts for the selective epoxidation of styrene by anhydrous H2O2 to styrene oxide with continuous removal of the reaction water. Influence of the catalyst (boehemite) calcination temperature, H2O2/styrene ratio and catalyst loading on the styrene conversion and selectivity for styrene oxide. phenyl acetaldehyde. benzaldehyde and benzoic acid in the epoxidation has been investigated. In the presence of water. the catalyst shows very poor activity and selectivity in the epoxidation. The catalyst also catalyses H2O2 decomposition and hence has optimum loading for obtaining high-styrene conversion in the epoxidation. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Alumina, anhydrous hydrogen peroxide, boehmite, Epoxidation of styrene, Styrene oxide}, issn = {1381-1169}, doi = {10.1016/j.molcata.2004.10.025}, author = {Choudhary, Vasant R. and Patil, N. S. and Chaudhari, Nitin K. and Bhargava, Suresh Kumar} } @article { ISI:000231661800013, title = {Expeditious convergent synthesis of a dibromotyrosine alkaloid inhibitor of mycothiol-S-conjugate amidase}, journal = {Tetrahedron Letters}, volume = {46}, number = {38}, year = {2005}, month = {SEP}, pages = {6461-6463}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A quick, economic synthesis of the alkaloid 1, an inhibitor of mycothiol-S-conjugate amidase (MCA) is reported. Starting from low-cost, commercially available 4-hydroxybenzaldehyde, the nine-step synthesis involved dibromination and coupling with N-acetylglycine to give a stable methyloxazole intermediate 5 which was hydrolyzed, oximated and coupled to agmatine to yield the oxime in -30\% overall yield. It was not necessary to protect the oxime in the synthetic sequence thereby circumventing a deprotection step. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {4-hydroxybenzaldehyde, marine alkaloid, mycothiol-S-conjugate amidase}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.07.109}, author = {Chanda, B. M. and Sulake, R. S.} } @article { ISI:000228951700012, title = {Facile regioselective decomposition of tosylhydrazones: an application towards the synthesis of alpha-lipoic acid}, journal = {Synlett}, number = {7}, year = {2005}, month = {MAY}, pages = {1129-1132}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A facile regioselective decomposition of tosylhydrazones using NaOH as a base in refluxing isopropyl alcohol is described. This finding has been Successfully applied towards the synthesis of (\±)-α-lipoic acid (1).

}, keywords = {alpha-lipoic acid, Olefins, Regioselectivity, tosylhydrazones}, issn = {0936-5214}, doi = {10.1055/s-2005-865217}, author = {Chavan, Subhash P. and Kale, R. R. and Pasupathy, K.} } @article { ISI:000228147400027, title = {First enantiospecific synthesis of (+)-beta-herbertenol}, journal = {Tetrahedron}, volume = {61}, number = {15}, year = {2005}, month = {APR}, pages = {3873-3879}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The first enantiospecific synthesis of (+)-beta-herbertenol, from naturally occurring R-(+)-citronellal, employing Taber{\textquoteright}s diazo decomposition protocol as the key step, is described. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {citronellal, diazo decomposition, enantiospecific}, issn = {0040-4020}, doi = {10.1016/j.tet.2005.01.050}, author = {Chavan, Subhash P. and Thakkar, M. and Kharul, Rajendra K. and Pathak, A. B. and Bhosekar, Gaurav V. and Bhadbhade, Mohan M.} } @article { ISI:000228094400009, title = {Gene expression patterns of helicoverpa armigera gut proteases}, journal = {Insect Biochemistry and Molecular Biology}, volume = {35}, number = {4}, year = {2005}, month = {APR}, pages = {355-367}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Relative quantification of reported gut proteinase cDNAs from Helicoverpa armigera larvae fed on various host plants (cotton, chickpea, pigeonpea, tomato and okra), non-host plant Pis (winged bean, bitter gourd, ground nut, and capsicum) and during larval development has been carried out using semi-quantitative RT-PCR. Five trypsin-like and three chymotrypsin-like proteinases were categorized as insensitive or sensitive to most of the proteinase inhibitors (Pis) and insensitive/sensitive to specific Pis based on their expression analysis. These results were supported by amino acid sequence analysis, where diverged amino acids were observed in the regions, which are reported to be involved in typical trypsin trypsin inhibitor interactions and critical for proteinase inhibitor resistance. Among exopeptidases (five aminopeptidase and three carboxypeptidase), HaAmi4 and HaAmi5 of aminopeptidase and HaCar1 of carboxypeptidase exhibited considerable differential expression. Elastase and cathepsin B-like proteinases were expressed at negligible levels. The proteases identified in the study would be ideal candidates for further interactions studies with protease inhibitors to understand the structural reasons of protease inhibitor insensitivity (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {expression, gut proteinases, Helicoverpa armigera, Proteinase inhibitors, RT-PCR}, issn = {0965-1748}, doi = {10.1016/j.ibmb.2005.01.006}, author = {Chougule, Nanasaheb P. and Giri, Ashok P. and Sainani, Mohini N. and Gupta, Vidya S.} } @article { ISI:000228531500004, title = {Gold nanotriangles biologically synthesized using tamarind leaf extract and potential application in vapor sensing}, journal = {Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry}, volume = {35}, number = {1}, year = {2005}, month = {FEB}, pages = {19-26}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

The size and shape dependent electronic and chemical properties of metal nanoparticles has drawn the attention of chemists, physicists, biologists, and engineers who wish to use them for the development of new generation nanodevices. In this article, we report the synthesis of gold nanotriangles using tamarind leaf extract as the reducing agent. On treating aqueous chloroauric acid solution with tamarind leaf extract, rapid reduction of the chloroaurate ions is observed leading to the formation of flat and thin single crystalline gold nanotriangles. Atomic force microscopy analysis of the gold nanotriangles indicated that they ranged in thickness from 20 to 40 nm. These gold nanotriangles with unique and highly anisotropic planer shapes might find application in photonics, optoelectronics, and optical sensing. We investigated the effect of different organic solvent vapors like methanol, benzene and acetone on the conductivity of tamarind leaf extract reduced gold nanotriangles. I-V characteristics measurement of these nanotriangles was done in presence of these organic solvent vapors. The observed characteristics suggest the application of gold nanotriangles to future chemical sensors.

}, keywords = {Biosynthesis, gold nanotriangles, tamarind leaf, vapor sensing}, issn = {1553-3174}, doi = {10.1081/SIM-200047527}, author = {Ankamwar, Balaprasad and Chaudhary, M and Sastry, M} } @article { ISI:000232775100003, title = {Green process for chlorine-free benzaldehyde from the solvent-free oxidation of benzyl alcohol with molecular oxygen over a supported nano-size gold catalyst}, journal = {Green Chemistry}, volume = {7}, number = {11}, year = {2005}, month = {OCT}, pages = {768-770}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Benzyl alcohol is oxidized selectively to benzaldehyde with high yield, with a little formation of benzylbenzoate, by molecular oxygen over a reusable nano-size gold catalyst supported on U3O8, MgO, Al2O3 or ZrO2 in the absence of any solvent.

}, issn = {1463-9262}, doi = {10.1039/b509003b}, author = {Choudhary, Vasant R. and Dhar, A. and Jana, Prabhas and Jha, Rani and Uphade, B. S.} } @article { ISI:000233975200003, title = {Highly active and reusable catalyst from Fe-Mg-hydrotalcite anionic clay for friedel-crafts type benzylation reactions}, journal = {Journal of Chemical Sciences}, volume = {117}, number = {6}, year = {2005}, month = {NOV}, pages = {635-639}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Fe-Mg-hydrotalcite (Mg/Fe = 3) anionic clay with or without calcination (at 200-800 degrees C) has been used for the benzylation of toluene and other aromatic compounds by benzyl chloride. Hydrotalcite before and after its calcination was characterized for surface area, crystalline phases and basicity. Both the hydrotalcite, particularly after its use in the benzylation reaction, and the catalyst derived from it by its calcination at 200-800 degrees C show high catalytic activity for the benzylation of toluene and other aromatic compounds. The catalytically active species present in the catalyst in its most active form are the chlorides and oxides of iron on the catalyst surface.

}, keywords = {activation by calcinations, benzylation of aromatic compounds, benzylation of toluene, Fe-Mg-hydrotalcite}, issn = {0253-4134}, doi = {10.1007/BF02708292}, author = {Choudhary, Vasant R. and Jha, Rani and Choudhari, P. A.} } @article { ISI:000227509900026, title = {Highly active new alpha-diimine nickel catalyst for the polymerization of alpha-olefins}, journal = {Journal of Organometallic Chemistry}, volume = {690}, number = {5}, year = {2005}, month = {MAR}, pages = {1314-1323}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A new silylated alpha-diimine ligand, bis[N,N {\textquoteleft}-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene 3, and its corresponding Ni(II) complex, {bis[N,N {\textquoteleft}-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene} dibromonickel 4, have been synthesized and characterized. The crystal structures of 3 and 4 were determined by X-ray crystallography. In the solid state, complex 4 is a dimer with two bridging Br ligands linking the two nickel centers, which have square pyramidal geometries. Complex 4, activated either by diethylaluminum chloride (DEAC) or methylaluminoxane (MAO) produces very active catalyst systems for the polymerization of ethylene and moderately active for the polymerization of propylene. The activity values are in the order of magnitude of 10(7) g PE (mol Ni [E] h)(-1) for the polymerization of ethylene and of 10(5) g PP (mol Ni [P] h)(-1) for the polymerization of propylene. NMR analysis shows that branched polyethylenes (PE) are obtained at room or higher temperatures and almost linear PE is obtained at 0 degrees C with 4/DEAC. (c) 2004 Elsevier B.V. All rights reserved.

}, keywords = {alpha-diimine nickel complex, Ethylene polymerization, late transition-metal, propylene polymerization}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2004.11.046}, author = {Liu, Hua-Rong and Gomes, P. T. and Costa, S. I. and Duarte, M. T. and Branquinho, R. and Fernandes, A. C. and Chien, J. C. W. and Singh, R. P. and Marques, Maria M.} } @article { ISI:000230122100004, title = {High-temperature stable and highly active/selective supported NiCoMgCeOx catalyst suitable for autothermal reforming of methane to syngas}, journal = {Journal of Catalysis}, volume = {233}, number = {1}, year = {2005}, month = {JUL}, pages = {36-40}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Low-surface-area, macroporous, zirconia-haffnia-supported NiCoMgOx and NiCoMgCeOx (Ni/Co/Mg/Ce = 1/0.2/1.2/0.0 or 1.2) catalysts, precalcined at high temperature ( 1400 degrees C for 4 h), showed both high activity (\> 98\% conversion) and selectivity ( \> 95\%) in the catalytic partial oxidation of methane (CPOM) to syngas. Their performance remained unchanged even after they were subjected to higher temperature (\> 2000 degrees C for 30 min) or a number of high-temperature (\> 2000 degrees C) shocks, due to their direct exposure to an oxyacetylene flame. The supported NiCoMgCeOx, however, showed superior performance in the steam and CO2 reforming reactions because of its much higher lattice oxygen mobility. Hence it is more suitable for the autothermal reforming of methane. (c) 2005 Elsevier Inc. All rights reserved.

}, keywords = {autothermal reforming of methane, Catalyst, catalytic partial oxidation of methane, CO2 reforming of methane, high-temperature stable supported NiCoMgCeOx catalyst, steam reforming of methane, zirconia-haffnia-supported NiCoMgCeOx catalysts, zirconia-haffnia-supported NiCoMgOx}, issn = {0021-9517}, doi = {10.1016/j.jcat.2005.04.019}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Mamman, Ajit Singh} } @article { ISI:000230828800038, title = {Hydrodynamics of trickle-bed reactors: experiments and CFD modeling}, journal = {Industrial \& Engineering Chemistry Research}, volume = {44}, number = {16}, year = {2005}, month = {AUG}, pages = {6278-6294}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{Hydrodynamics of trickle-bed reactors involve complex interactions of gas and liquid phases with packed solids. Such complex interactions manifest in different flow regimes occurring in trickle-bed reactors. Knowledge of prevailing flow regime, pressure drop, and liquid holdup is essential for design and performance evaluation of the reactor. Detailed knowledge of fluid dynamics is essential for {\textquoteleft}{\textquoteleft}a priory{\textquoteright}{\textquoteright} predictions as well as for interpretation of available data. In this study, we have used wall pressure fluctuation measurements to identify prevailing flow regime in trickle beds. Experiments were carried out on two scales of columns (of diameter 10 cm and 20 cm) with two sets of particles (3 min and 6 mm diameter spherical particles). Effects of prewetted and unwetted bed conditions on pressure drop and liquid holdup were reported for a range of operating conditions (V-G = 0.22-0.44 kg/m(2)s

}, issn = {0888-5885}, doi = {10.1021/ie0491037}, author = {Gunjal, P. R. and Kashid, M. N. and Ranade, V. V. and Chaudhari, Raghunath V.} } @article { ISI:000228203100026, title = {Hydroformylation of 1-hexene using Rh/TPPTS complex exchanged on anion exchange resin: kinetic studies}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {232}, number = {1-2}, year = {2005}, month = {MAY}, pages = {179-186}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The exchange of the Rh/Triphenylphosphine trisulfonate sodium [TPPTS] complex on to an anion exchange resin results in a stable heterogenized catalyst for the hydroformylation of alkenes. The kinetics of hydroformylation of 1-hexene using Rh/TPPTS complex exchanged on anion exchange resin to Amberlite IRA-93 has been investigated for the first time. The rate of the reaction was found to be dependent on the partial pressure of hydrogen and 1-hexene concentrations with a first order. A maximum in the rate with increasing partial pressure of carbon monoxide was observed. A rate model has been proposed which predicts the observed rate data within reasonable error. The activation energy was found to be 84.37 kJ/mol. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {heterogenized catalyst, Hydroformylation, ion-exchange resin, kinetics, Rhodium}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.01.033}, author = {Diwakar, Makarand M. and Deshpande, R. M. and Chaudhari, Raghunath V.} } @article { ISI:000226504900012, title = {Hydrogen peroxide formation in the interaction of oxygen with boron-containing Pd catalysts prereduced by hydrazine in aqueous acidic medium containing bromide anions}, journal = {Catalysis Letters}, volume = {99}, number = {1-2}, year = {2005}, month = {JAN}, pages = {79-81}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

Interaction of molecular oxygen with Pd/BPO4 or ZrO2 (or Al2O3, CeO2, TiO2) - B2O3 catalysts, prereduced by hydrazine hydrate, in an aqueous acidic (H2SO4 or H3PO4) reaction medium containing bromide ions leads to the formation of H2O2. However, in the absence of boron in the catalyst and also in the absence of acid and/or bromide ions in the reaction medium, almost no H2O2 is formed.

}, keywords = {boron-containing Pd catalysts, Hydrogen peroxide, oxygen-catalyst interactions}, issn = {1011-372X}, doi = {10.1007/s10562-004-0779-z}, author = {Choudhary, Vasant R. and Samanta, C.} } @article { ISI:000227321900006, title = {Hydrophobically modified poly(acrylic acid) using 3-pentadecylcyclohexylamine: synthesis and rheology}, journal = {Macromolecular Chemistry and Physics}, volume = {206}, number = {4}, year = {2005}, month = {FEB}, pages = {464-472}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Hydrophobically modified poly(acrylic acid) was synthesized using 3-pentadecylcyclohexylamine (3-PDCA), which was in turn synthesized from 3-pentadecylphenol, one of the components of cashew-nut shell liquid (CNSL), a renewable resource material. H-1 NMR spectra confirmed the incorporation of 3-PDCA onto PAA and a series of HMPs with three different molar concentrations, viz. congruent to 3, 5 and 7 mol-\% of 3-PDCA, were synthesized. An increase in viscosity with increasing hydrophobic content was observed by rheological measurements. The critical association concentrations were determined using an Ubbelohde viscometer and a controlled stress rheometer. The stability of HMPs towards temperature and shear was studied. Rheological measurements showed that there was a steady increase in viscosity with increase in hydrophobe content due to the formation of reversible networks. These polymers exhibited gel-like behavior at low concentrations (greater than or equal to2 wt.-\%) with an apparent yield stress (ca. 10 Pa) and showed shear thinning properties (non-Newtonian). However, below a critical concentration, c [eta], they showed Newtonian behavior.

}, keywords = {3-pentadecylcyclohexylamine (3-PDCA), hydrophobically modified polymers (HMPs), poly(acrylic acid), reversible associations, Rheology}, issn = {1022-1352}, doi = {10.1002/macp.200400392}, author = {Shedge, A. S. and Lele, Ashish K. and Wadgaonkar, P. P. and Hourdet, Dominique and Pcrrin, P. and Chassenieux, Christophe and Badiger, Manohar V.} } @article { ISI:000227632100007, title = {In vivo and in vitro effect of capsicum annum proteinase inhibitors on helicoverpa armigera gut proteinases}, journal = {Biochimica Et Biophysica Acta-General Subjects}, volume = {1722}, number = {2}, year = {2005}, month = {MAR}, pages = {156-167}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Two proteinase inhibitors (PIs), CapA1 and CapA2, were purified from Capsicum annum Linn. Var. Phule Jyoti leaves and assessed for their in vitro and in vivo activity against Helicoverpa armigera gut proteinases (HGPs). Both the inhibitors exhibited molecular weights of about 12 kDa with inhibitory activity against bovine trypsin and chymotrypsin indicating presence of probable two-inhibitor repeats of PIN II family. CapA1 and CapA2 inhibited 60-80\% HGP (azocaseinolytic) activity of fourth instar larvae feeding on various host plants while 45-65\% inhibition of HGP activity of various instars (II to VI) larvae reared on artificial diet. The partial purification of HGP isoforms, their characterization with synthetic inhibitors and inhibition by C. annum PIs revealed that most of the trypsin-like activity (68-91\%) of HGPs was sensitive to C. annum PIs while 39-85\% chymotrypsin-like activity of HGPs was insensitive to these inhibitors. The feeding of C. annum leaf extracts and two purified PIs in various doses to H. armigera larvae for two successive generations through artificial diet demonstrated their potential in inhibiting larval growth and development, delay in pupation period and dramatic reduction in fecundity and fertility. This is the first report-demonstrating efficacy of C. annum PIs against insect gut proteinases as well as larval growth and development of H. armigera. (c) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Capsicum annum, gut proteinase, Helicoverpa armigera, insect resistance, Proteinase inhibitor}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2004.12.017}, author = {Tamhane, V. A. and Chougule, Nanasaheb P. and Giri, Ashok P. and Dixit, A. R. and Sainani, Mohini N. and Gupta, Vidya S.} } @article { ISI:000232694100001, title = {Inactive enzymatic mutant proteins (phosphoglycerate mutase and enolase) as sugar binders for ribulose-1,5-bisphosphate regeneration reactors}, journal = {Microbial Cell Factories}, volume = {4}, year = {2005}, month = {FEB}, pages = {Article No. 5}, publisher = {BIOMED CENTRAL LTD}, type = {Article}, address = {MIDDLESEX HOUSE, 34-42 CLEVELAND ST, LONDON W1T 4LB, ENGLAND}, abstract = {

Background: Carbon dioxide fixation bioprocess in reactors necessitates recycling of D- ribulose1,5-bisphosphate (RuBP) for continuous operation. A radically new close loop of RuBP regenerating reactor design has been proposed that will harbor enzyme-complexes instead of purified enzymes. These reactors will need binders enabling selective capture and release of sugar and intermediate metabolites enabling specific conversions during regeneration. In the current manuscript we describe properties of proteins that will act as potential binders in RuBP regeneration reactors. Results: We demonstrate specific binding of 3-phosphoglycerate (3PGA) and 3-phosphoglyceraldehyde ( 3PGAL) from sugar mixtures by inactive mutant of yeast enzymes phosphoglycerate mutase and enolase. The reversibility in binding with respect to pH and EDTA has also been shown. No chemical conversion of incubated sugars or sugar intermediate metabolites were found by the inactive enzymatic proteins. The dissociation constants for sugar metabolites are in the micromolar range, both proteins showed lower dissociation constant (Kd) for 3-phosphoglycerate ( 655 - 796 mu M) compared to 3-phosphoglyceraldehyde ( 822 - 966 mu M) indicating higher affinity for 3PGA. The proteins did not show binding to glucose, sucrose or fructose within the sensitivity limits of detection. Phosphoglycerate mutase showed slightly lower stability on repeated use than enolase mutants. Conclusions: The sugar and their intermediate metabolite binders may have a useful role in RuBP regeneration reactors. The reversibility of binding with respect to changes in physicochemical factors and stability when subjected to repeated changes in these conditions are expected to make the mutant proteins candidates for in-situ removal of sugar intermediate metabolites for forward driving of specific reactions in enzyme-complex reactors.

}, issn = {1475-2859}, doi = {10.1186/1475-2859-4-5}, author = {De, Dinesh and Dutta, D. and Kundu, M. and Mahato, S. and Schiavone, M. T. and Chaudhuri, S. and Giri, Ashok P. and Gupta, Vidya and Bhattacharya, S. K.} } @article { ISI:000233351600005, title = {IndCollections: biological specimens in Indian collections}, journal = {Current Science}, volume = {89}, number = {9}, year = {2005}, month = {NOV}, pages = {1454-1455}, publisher = {CURRENT SCIENCE ASSN}, address = {C V RAMAN AVENUE, PO BOX 8005, BANGALORE 560 080, INDIA}, issn = {0011-3891}, author = {Chavan, V. and Rane, N. S. and Ghate, H. V. and Krishnan, S.} } @article {42819, title = {India: apremier destination for outsourcing}, volume = {42}, year = {2005}, month = {JAN}, author = {Chorghade, Mukund S. and Chorghade, V. M. and Gurjar, Mukund K. and Ramana, Chepuri V. and Kamerkar, A. V. and Zafran, H. and Mashelkar, Raghunath Anant} } @article { ISI:000228136800013, title = {IndOBIS, an ocean biogeographic information system for assessment and conservation of indian ocean biodiversity}, journal = {Indian Journal of Marine Sciences}, volume = {34}, number = {1}, year = {2005}, note = {Workshop on Coastal and Marine Biodiversity of Indian Ocean Countries, Goa, INDIA, DEC, 2003}, month = {MAR}, pages = {120-127}, publisher = {NATL INST SCIENCE COMMUNICATION}, type = {Article}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

Compilation of inventories of components of coastal and marine biodiversity of Indian Ocean is hampered by several factors: low effort by some countries, preference to certain taxon, dwindling taxonomic expertise, low infrastructure of Information Technology, databases that are scattered and often non-interoperable, inconsistent reporting and a marked reluctance to share data and information. The creation of the Indian Ocean node of the Ocean Biogeographic Information System is meant to overcome some of these constraints. Benefiting from progress in Information Technology and building on the global efforts on understanding what lives in our seas, the IndOBIS aims to grow into a self-sustaining and collectively supported process of information collation, analysis and dissemination, serving the countries of the region and the international scientific community.

}, keywords = {biodiversity informatics, biogeography, distributed database systems, Indian Ocean, IndOBIS, information systems, Ocean Biogeographic Information System}, issn = {0379-5136}, author = {Chavan, V. and Achuthankutty, C. T. and Vanden Berghe, E. and Wafar, M.} } @article { ISI:000233264700006, title = {Influence of alkali metal doping on selectivity behaviour of platinum catalysts for hydrogenation of 2-butyne-1,4-diol}, journal = {Catalysis Communications}, volume = {6}, number = {11}, year = {2005}, month = {NOV}, pages = {725-730}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydrogenation of 2-butyne-1,4-diol to 2-butene-1,4-diol (B(2)D) and butane-1,4-diol (B(1)D) using Pt catalysts doped with alkali metals was studied. These catalysts showed higher selectivity to the olefinic diol (B2D) compared to that with monometallic platinum catalyst. Among various alkali metals, Cs-doped catalyst showed highest selectivity (\>99\%) to B(2)D. The selectivity to B(2)D increased (up to 99.9\%) with increase in the concentration of Cs from 0.25\% to 1\%. The increase in the basic strength of alkali doped catalysts measured by CO(2)-TPD, would be responsible for the increase in electron density of Pt hence, faster desorption and higher selectivity to the intermediate olefinic diol (B(2)D). The reaction parameters; such as temperature, H(2) pressure and substrate concentration haye strong influence on the catalyst activity but almost no effect on the selectivity to B(2)D. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {2-butene-1, 2-butyne-1, 4-diol, alkali metal doping, platinum catalysts, Selective hydrogenation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2005.07.009}, author = {Telkar, M. M. and Rode, C. V. and Rane, V. H. and Chaudhari, R.} } @article { ISI:000233927900004, title = {Influence of hydrothermal pretreatment on acidity and activity of H-GaAlMFI zeolite for the propane aromatization reaction}, journal = {Microporous and Mesoporous Materials}, volume = {87}, number = {1}, year = {2005}, month = {DEC}, pages = {23-32}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The acidity and propane aromatization activity of H-GaAlMFI has been investigated subsequent to different hydrothermal (HT) pretreatments. Extensive degalliation of framework Ga occurred during the HT pretreatments; the framework Si/Ga ratio nearly doubled when the steam concentration was increased from 0\% to 80\%. The extent of degalliation and corresponding loss of strong zeolitic acidity (measured in terms of pyridine chemisorbed at 400 degrees C) was particularly severe at high (\> 500 degrees C) temperatures and steam concentrations (\> 40 mol\%). Framework Al in the GaAlMFI zeolite was found to be very stable; the FW Si/Al ratio did not change to any appreciable extent even after severe HT pretreatments. Each of the HT pretreatment parameters (concentration of steam: 0-80\%, HT temperature: 400-600 degrees C and length of HT pretreatment: 0-6 h) showed a profound influence on the propane aromatization activity. The product selectivity was, however, only mildly affected by the HT pretreatments. The following factors were found to be important for high propane aromatization activity (a) strong zeolitic acidity and (b) optimal content/dispersion of the extra-framework Ga species which are formed in situ during the HT pretreatments. (c) 2005 Elsevier Inc. All rights reserved.

}, keywords = {Acidity, aromatic distribution, Ga-based zeolites, hydrothermal treatment and steam, propane aromatization}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2005.07.028}, author = {Choudhary, Tushar V. and Kinage, A. and Banerjee, S. and Choudhary, Vasant R.} } @article { ISI:000226717900001, title = {Influence of PdO content and pathway of its formation on methane combustion activity}, journal = {Catalysis Communications}, volume = {6}, number = {2}, year = {2005}, month = {FEB}, pages = {97-100}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The methane oxidation reaction is known to induce changes in the surface structure and composition of Pd catalysts; making it extremely arduous to relate the methane oxidation activity to specific catalyst properties by conventional methods (continuous flow reactor studies). To circumvent this, methodical pulse reactor studies have been undertaken to obtain correlations between the initial methane combustion activity and the catalyst properties (Pd-0/PdO content and path of PdO formation). While the initial methane combustion activity (at 160-280 degreesC) continuously increased with increasing PdO concentration (0-100\%) in the catalyst, it continuously decreased with increasing Pddegrees content (0-100\%). Controlled studies were undertaken to obtain catalysts with identical PdO content by two pathways: (i) by controlled partial oxidization of Pd-0/Al2O3 and (ii) by controlled partial reduction of PdO/Al2O3. Interestingly, for a given PdO content, the catalysts obtained by partial oxidation of Pd-0/Al2O3 showed a significantly superior performance to the catalyst obtained by partial reduction of PdO/Al2O3 for all the temperatures investigated. These studies unambiguously show that along with the relative concentration of PdO, the PdO formation pathway is also critical in deciding the methane combustion activity of the catalyst. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Methane combustion, Oxidation, partially oxidized Pd-0/Al2O3, partially reduced PdO/Al2O3, Pd-0/Al2O3, PdO/Al2O3, pulse reaction of methane}, issn = {1566-7367}, doi = {10.1016/j.catcom.2004.11.004}, author = {Choudhary, Tushar V. and Banerjee, S. and Choudhary, Vasant R.} } @conference { ISI:000234827500072, title = {Influence of Sn- and Al- metal sources on post-synthesis modification of mesoporous SBA-15 molecular sieves}, booktitle = {3rd Conference of the Federation-of-European-Zeolite-Association}, series = {Studies in Surface Science and Catalysis}, volume = {158}, number = {A-B}, year = {2005}, note = {3rd Conference of the Federation-of-European-Zeolite-Association, Prague, CZECH REPUBLIC, AUG 23-29, 2005}, month = {AUG}, pages = {565-572}, publisher = {Elsevier Science BV, Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, organization = {Elsevier Science BV, Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, address = {Prague, Czech Republic}, abstract = {

Mesoporous silica SBA-15 has been incorporated with various amounts of Sn and Al by post synthesis grafting technique, which results in excellent structural integrity and enhanced acidity. Physico-chemical characterization was done by various spectroscopic methods to understand the chemical nature of incorporated Sn and Al. XRD and BET results show that the hexagonal structural of the SBA-15 is maintained during the grafting with no loss of long range structure ordering. (119)Sn NMR Spectrum shows the presence of Sri in essentially octahedral environment, while 27 Al MAS NMR results confirm that a large proportion of the Al is in tetrahedral position. The resulting Sn and Al-grafted materials possess considerable catalytic activity in the transesterification of diethylmalonate (medium acidity) and isopropylation of naphthalene (strong acid sites), respectively.

}, isbn = {0-444-52082-1}, issn = {0167-2991}, author = {Shah, P and Ramaswamy, AV and Ramaswamy, V}, editor = {Cejka, J and Zilkova, N and Nachtigall, P} } @article { ISI:000231401000011, title = {In-Mg-hydrotalcite anionic clay as catalyst or catalyst precursor for friedel-crafts type benzylation reactions}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {239}, number = {1-2}, year = {2005}, month = {SEP}, pages = {76-81}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In-Mg-hydrotalcite (Mg/In = 3) anionic clay with or without calcination (at 200-800 degrees C) or HCl pretreatment at different temperatures (26 and 80 degrees C) and periods (0.1 or 1.0 h) has been used for the benzylation of benzene and/or substituted benzenes by benzyl chloride. The hydrotalcite before and after its calcination or HCl pretreatment was characterized for its surface area, crystalline phases and basicity. The hydrotalcite particularly after its use in the benzylation reaction, and the catalyst derived from it by its calcination at 800 degrees C followed by HCl pretreatment (at 80 degrees C for 1.0 h), shows high catalytic activity even for the benzylation of benzene. The catalytically active species present in the catalyst in its most active form are the chlorides and oxides of indium on the catalyst surface. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {activation of In-Mg-hydrotalcite by calcination, activation of In-Mg-hydrotalcite by HCl pretreatment, benzylation of benzene, benzylation of substituted benzenes, In-Mg-hydrotalcite}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.06.003}, author = {Choudhary, Vasant R. and Jha, Rani and Narkhede, V. S.} } @article { ISI:000227818600031, title = {Isolation and characterization of an iodide bridged dimeric palladium complex in carbonylation of methanol}, journal = {Journal of Organometallic Chemistry}, volume = {690}, number = {6}, year = {2005}, month = {MAR}, pages = {1677-1681}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Palladium-catalyzed carbonylation of methanol in presence of iodide promoters was investigated. Iodide bridged palladium dimeric complex, [PPh3CH3](2)[Pd2I6] was isolated from the carbonylation reaction mixture and characterized using X-ray crystallography. Reaction mechanism was proposed based on IR and UV spectroscopic characterizations of catalytic species involved in the catalytic cycle. The isolated dimeric palladium species, [Pd2I6](2-) underwent carbonylation to give monomeric species [PdI3CO](-) at atmospheric pressure of carbon monoxide. It was also observed that PPh3 plays an important role to avoid catalyst deactivation at higher temperatures. Turnover frequency (TOF) of 1052 h(-1) was achieved using Pd(OAC)(2)-HI-PPh3 catalyst system at 175 degrees C. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {dirneric palladium, IR spectroscopy, methanol carbonylation, palladium catalyst, reaction mechanism, UV}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2005.01.010}, author = {Tonde, S. S. and Kelkar, Ashutosh A. and Bhadbhade, Mohan M. and Chaudhari, Raghunath V.} } @article { ISI:000230435900058, title = {Kinetic modeling of reductive alkylation of aniline with acetone using Pd/Al2O3 catalyst in a batch slurry reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {44}, number = {14}, year = {2005}, month = {JUL}, pages = {5388-5396}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The kinetics of reductive alkylation of aniline with acetone was studied in a slurry reactor under isothermal conditions in a temperature range of 378-408 K using 3\% Pd/Al2O3 catalyst. Experimental data on concentration-time as well as hydrogen consumption-time profiles were obtained to study the effect of concentration of aniline, catalyst loading, and partial pressure of hydrogen. Separate controlled experiments were performed to understand the nature of the condensation reaction between aniline and acetone, which forms the Shiff{\textquoteright}s base intermediate. From the concentration-time profiles and the effect of reaction conditions, it was found that the noncatalytic equilibrium formation of the Shiff base intermediate was the slowest step in the multistep reaction sequence. Several rate equations were considered to fit the batch slurry reactor data, and rate models based on competitive dissociative adsorption of hydrogen and the reactive substrates in the rate-limiting catalytic steps were found to represent the experimental data. The kinetic parameters were evaluated by fitting the integral batch reactor data at different temperatures. The activation energies, heat of adsorption, and entropy of adsorption of all the reactant species were also evaluated.

}, issn = {0888-5885}, doi = {10.1021/ie049093+}, author = {Roy, D. and Jaganathan, Rengaswamy and Chaudhari, Raghunath V.} } @article { ISI:000227293600008, title = {Kinetics of the complete combustion of dilute propane and methyl ethyl ketone over Cr-doped ZrO2 catalyst}, journal = {Chemical Engineering Science}, volume = {60}, number = {6}, year = {2005}, month = {MAR}, pages = {1575-1581}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The kinetics of the complete combustion of propane and methyl ethyl ketone (MEK) at very low concentration in air (0.45 and 0.4 mol\% in air, respectively) over Cr-doped ZrO2 (cubic) catalyst (Cr/Zr = 0.25) at different temperatures (485-673 K) in the kinetic control regime have been investigated. The combustion rate data could be fitted well to both the power law and redox (Mars-Van Krevelen) models. From the power law model, the apparent activation energy for the combustion of propane and MEK has been found to be 16.5 and 13.2 kcal mol(-1), respectively. Among the two models, the redox one, however, gave a better fit to the kinetic data for both the combustion of propane and MEK. (C) 2004 Elsevier Ltd. All rights reserved.

}, keywords = {combustion kinetics, combustion of methyl ethyl ketone, combustion of propane, Cr-doped ZrO2 (cubic) catalyst, methyl ethyl ketone, propane}, issn = {0009-2509}, doi = {10.1016/j.ces.2004.10.028}, author = {Choudhary, Vasant R. and Deshmukh, G. M.} } @article { ISI:000226471300007, title = {Kinetics of the complete combustion of dilute propane and toluene over iron-doped ZrO2 catalyst}, journal = {Energy \& Fuels}, volume = {19}, number = {1}, year = {2005}, month = {JAN}, pages = {54-63}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The kinetics of the complete combustion of propane and toluene at very low concentrations in air (0.45 and 0.3 mol \% in air, respectively) over iron-doped ZrO2 (cubic) catalyst (Fe/Zr = 0.25) at different temperatures (598-723 K) in kinetic control regime have been investigated. The combustion rate data could be fitted very well to both the power-law and redox (Mars-Van Krevelen) models. However, the redox model provided a better fit to the kinetic data for the propane combustion. It also showed a better fit to the toluene combustion data at the lower temperatures (623 K). The reaction order (with respect to the hydrocarbon), apparent activation energy, and frequency factor (from the power-law model) for the propane combustion were 0.96 (average), 21.16 kcal/mol, and 4.67 x 10(5) Mol g(-1) h(-1) kPa(-n), respectively, and those for the toluene combustion were 0.77 (average), 26.08 kcal/mol, and 1.48 x 10(7) mol g(-1) h(-1) kPa(-n), respectively.

}, issn = {0887-0624}, doi = {10.1021/ef0498871}, author = {Choudhary, Vasant R. and Deshmukh, G. M. and Mishra, D. P.} } @article { ISI:000229553300007, title = {Larvicidal activity of acacia nilotica extracts and isolation of D-pinitol - a bioactive carbohydrate}, journal = {Chemistry \& Biodiversity}, volume = {2}, number = {5}, year = {2005}, month = {MAY}, pages = {684-688}, publisher = {VERLAG HELVETICA CHIMICA ACTA AG}, type = {Article}, address = {HOFWIESENSTRASSE 26, POSTFACH, CH-8042 ZURICH, SWITZERLAND}, abstract = {

A low-molecular-weight, sugar-like compound other than glucose, fructose, sucrose, or myo-inositol showing lipophilic nature was isolated from the EtOH extract of Acacia nilotica. The structure of the compound was determined by spectral methods. This alicyclic polyalcohol was found to be D-pinitol (- 3-O-methyl-D-chiro-inositol; 1). The configuration of the compound was confirmed by single-crystal X-ray analysis. The compound I is known from Soybean, Australian mangroves, Fagonia indica, A rachis hypogaea, etc., but we have isolated this compound for the first time from the aerial parts of A. nilotica. Very few references have been cited for compound I for its entomological activity, and there are no reports on mosquitoes. Therefore, the crude extracts of A. nilotica were tested for its biological activity against mosquito larvae. Acetone extract at 500-ppm concentration showed chronic toxicity against Aedes aegypti and Culex quinquefasciatus IVth instar mosquito larvae. Such a biological activity has been observed for the first time for this plant. This study could be a stepping stone to a solution for destroying larval species as well as consumption of such a widely grown, problem weed, A. nilotica. This larvicidal agent, since it is derived from plant, is eco-friendly, cost effective, non-hazardous to nontarget organisms and would be safe unlike commercially available insecticides.

}, issn = {1612-1872}, doi = {10.1002/cbdv.200590044}, author = {Chaubal, Rohini and Pawar, P. V. and Hebbalkar, G. D. and Tungikar, V. B. and Puranik, Vedavati G. and Deshpande, V. H. and Deshpande, N. R.} } @article { ISI:000230701800011, title = {Low temperature complete combustion of dilute toluene and methyl ethyl ketone over Mn-doped ZrO2 (cubic) catalysts}, journal = {Journal of Chemical Technology and Biotechnology}, volume = {80}, number = {8}, year = {2005}, month = {AUG}, pages = {934-938}, publisher = {JOHN WILEY \& SONS LTD}, type = {Article}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

Combustion of dilute toluene and methyl ethyl ketone over Mn-doped ZrO2 catalysts prepared using different precipitating agents, such as tetra-alkyl ammonium hydroxides and NH4OH, having Mn/Zr ratios from 0.05 to 0.67, and calcined at different temperatures has been thoroughly investigated. The Mn-doped ZrO2 catalyst shows high toluene or methyl ethyl ketone combustion activity, particularly when its ZrO2 is in cubic form, when its Mn/Zr ratio is close to 0.2, and when it is prepared using tetra-methyl ammonium hydroxide as a precipitating agent and calcined at 773 K. (c) 2005 Society of Chemical Industry.

}, keywords = {combustion of methyl ethyl ketone, combustion of toluene, Mn-doped ZrO2 catalyst}, issn = {0268-2575}, doi = {10.1002/jctb.1264}, author = {Choudhary, Vasant R. and Deshmukh, G. M. and Pataskar, S. G.} } @article { ISI:000228172600072, title = {Low-temperature complete combustion of a dilute mixture of methane and propane over transition-metal-doped ZrO2 catalysts: effect of the presence of propane on methane combustion}, journal = {Environmental Science and Technology}, volume = {39}, number = {7}, year = {2005}, month = {APR}, pages = {2364-2368}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Complete combustion of dilute methane alone or a dilute mixture of methane and propane over transition-metal (viz. Mn, Co, Cr, Fe, and Ni)-doped ZrO2 (cubic) catalysts at different temperatures (523-873 K) and a space velocity of 51 000 CM3 center dot g(-1)center dot h(-1) has been investigated for controlling methane and propane emissions from exhaust gases. The catalysts are compared for their catalytic ignition temperature and activity in the combustion of propane and methane in the presence of each other. The methane combustion activity of all the catalysts is strongly influenced by the presence of propane; it is decreased markedly. In the combustion of mixed methane and propane the Mn-doped ZrO2 and Cr-doped ZrO2 catalysts show the highest activity in the combustion of methane and propane, respectively; the Ni-doped ZrO2 shows the lowest activity in both cases. In the combustion of mixed methane and propane the propane combustion is enhanced but the methane combustion retarded when the Cr-doped ZrO2 and Mn-doped ZrO2 catalysts in a 1:1 ratio are used together in different ways (mixed or in layers).

}, issn = {0013-936X}, doi = {10.1021/es048748v}, author = {Choudhary, Vasant R. and Deshmukh, G. M. and Pataskar, S. G.} } @article { ISI:000232103800003, title = {Mitochondrial sequence reveals high levels of gene flow between breeds of domestic sheep from Asia and Europe}, journal = {Journal of Heredity}, volume = {96}, number = {5}, year = {2005}, month = {SEP}, pages = {494-501}, publisher = {OXFORD UNIV PRESS INC}, type = {Article}, address = {JOURNALS DEPT, 2001 EVANS RD, CARY, NC 27513 USA}, abstract = {

Sequence variation present within the mitochondrial genome was used to investigate genetic diversity within sheep breeds from Asia and Europe. Comparison of 2027 bp of sequence from 121 animals revealed 44 phylogenetically informative nucleotide positions and a single insertion/deletion. A total of 57 haplotypes were observed which formed two distinct clades. Type A haplotypes were found in breeds from Asia (India, Indonesia, Mongolia, and Tibet), while type B haplotypes were observed at the highest frequency in breeds sourced from Europe (nine breeds from Austria, angstrom land, Finland, Spain, and northwestern Russia). The distribution of haplotypes indicates sheep appear to have the weakest population structure and the highest rate of intercontinental dispersal of any domestic animal reported to date. Only 2.7\% of the sequence variation observed was partitioned between continents, which is lower than both goat (approximately 10\%) and cattle (approximately 50\%). Diagnostic restriction fragment length polymorphism polymerase chain reaction (RFLP-PCR) tests which distinguish type A and B haplotypes were used to test an additional 223 animals from 17 breeds of European and Asian origin. A mixture of the two lineages was found in every breed except Suffolk and the Indian Garole, indicating introgression has played a major part during breed development and subsequent selection.

}, issn = {0022-1503}, doi = {10.1093/jhered/esi100}, author = {Meadows, J. R. S. and Li, K. and Kantanen, J. and Tapio, M. and Sipos, W. and Pardeshi, V. and Gupta, V. and Calvo, J. H. and Whan, V. and Norris, B. and Kijas, J. W.} } @article { ISI:000234827500083, title = {Molecular dynamics simulations of H2O with sites of Cu-I-FAU and Cu-II-FAU}, journal = {Studies in surface science and catalysis }, volume = {158}, number = {A-B}, year = {2005}, note = {3rd Conference of the Federation-of-European-Zeolite-Association, Prague, CZECH REPUBLIC, AUG 23-29, 2005}, month = {OCT}, pages = {655-662}, publisher = {Elsevier Science}, type = {Article, Proceedings Paper}, address = {Prague, Czech Republic}, abstract = {

A Born Oppenheimer molecular dynamic (BOMD) approach was chosen to study the interaction of water molecules with Cu-FAU models. We have compared the reactivity of Cu-I and Cu-II with the zeolite and compared the results to those calculated for Na. This Study shows a decrease of the coordination with time for Cu-I whereas there is not a significant change for Cu-II. BOMD shows also that, in the presence of water, Na+ may lead to easier cation exchange than for transition metal cations.

}, isbn = {0-444-52082-1}, issn = {0167-2991}, doi = {10.1016/S0167-2991(05)80397-0}, author = {Berthomieu, D. and Krishnamurty, S. and Heine, Thomas and Goursot, A.}, editor = {Cejka, J. and Zilkova, N. and Nachtigall, P.} } @article { ISI:000229103900015, title = {Nanostructured tin oxide: synthesis and gas-sensing properties}, journal = {Materials Chemistry and Physics}, volume = {92}, number = {2-3}, year = {2005}, month = {AUG}, pages = {384-388}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Pure and Ru-doped nanostructured SnO2 sensing materials were synthesized using a modified Pechini route. Incorporation of Ru in SnO2 results in the reduction of particle size (8.3 nm) compared with that of the pure SnO2 (28.2 nm). Moreover, the sensor exhibited a reasonably good sensitivity towards both H-2 and liquified petroleum gas (LPG). The effect of Ru incorporation, operating temperature, and gas concentration on the structure, morphology, and sensitivity is discussed using the results of X-ray diffraction (XRD), and scanning electron microscopy (SEM) along with sensing performance. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {hydrogen and hydrocarbon sensor, Nanostructure, ruthenium, tin oxide}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.01.050}, author = {Niranjan, R. S. and Hwang, Young Kyu and Kim, D. K. and Jhung, S. H. and Chang, J. S. and Mulla, Imtiaz S.} } @article { ISI:000229156500009, title = {New method for the preparation of 1,2-benzisoxazole-3-carboxaldehyde}, journal = {Journal of Chemical Research}, number = {2}, year = {2005}, month = {FEB}, pages = {99-100}, publisher = {SCIENCE REVIEWS LTD}, type = {Article}, address = {PO BOX 314, ST ALBANS AL1 4ZG, HERTS, ENGLAND}, abstract = {

Synthesis of 1,2-benzisoxazole-3-carboxaldehyde is achieved from 3-methyl 1,2-benzisoxazole via 3-ethoxymethyl-1,2-benzisoxazole (4).

}, keywords = {1, 2-benzisoxazoles, benzylic bromination, indoxazenes}, issn = {0308-2342}, author = {Kalkote, Uttam R. and Panchgalle, S. R. and Mahakal, K. K. and Choudhary, S. M. and Chavan, Sayalee R.} } @article { ISI:000233685400032, title = {New route for the synthesis of propylene glycols via hydroformylation of vinyl acetate}, journal = {Industrial \& Engineering Chemistry Research}, volume = {44}, number = {25}, year = {2005}, note = {Joint 5th International Symposium on Catalysis in Multiphase Reactors/4th International Symposium on Multifunctional Reactors, Portoroz-Portorose, SLOVENIA, JUN 15-18, 2005}, month = {DEC}, pages = {9601-9608}, publisher = {Amer Chemical Soc, 1155 16th ST, NW, Washington, DC 20036 USA}, type = {Article, Proceedings Paper}, address = {Portoroz-Portorose, Slovenia}, abstract = {

Hydroformylation of vinyl acetate (VAM) has been studied as a key step in the alternative route for the synthesis of 1,2-propanediol (1,2-PDO) and 1,3-propanedol (1,3-PDO) using homogeneous rhodium (Rh) and cobalt (Co) complex catalysts. The feasibility of the VAM hydroformylation route has been demonstrated, and a detailed study has been reported on the key hydroformylation step using homogeneous Rh and Co catalysts. The roles of the catalyst precursors, ligands, and solvents in the activity and regioselectivity of the aldehyde products, i.e., 2-acetoxy propanal (2-ACPAL) and 3-acetoxy propanal (3-ACPAL), and the effect of reaction conditions have been investigated. With Rh-phosphine catalysts, 2-ACPAL is obtained with a selectivity of \> 90\%, while with cobalt carbonyl catalyst, 2-ACPAL and 3-ACPAL are formed with comparable selectivities (similar to 50\% each) thus substantially improving the selectivity of the linear aldehyde, a precursor for 1,3-PDO. In halogenated solvents with cobalt carbonyl catalyst, the selectivity to 3-ACPAL was found to increase still further (58\%). A possible mechanism to explain the variation in regioselectivity for the Rh anal Co catalysts has been discussed. In the presence of pyridine as a ligand in the Co-catalyzed hydroformylation of VAM, the rate of reaction was found to be enhanced 4-fold. The hydrogenation of acetoxypropanal isomers using Raney-Ni catalyst followed by hydrolysis using Amberlite IR-120 resin catalyst gave quantitative conversion to the mixture of 1,2- and 1,3-PDOs (\> 90\% yield).

}, issn = {0888-5885}, doi = {10.1021/ie050272g}, author = {Borole, Yogesh L. and Chaudhari, Raghunath V.} } @conference { ISI:000245886300024, title = {Novel method for the synthesis of siloxane nanowires and filaments using gold nanoparticle catalysts}, booktitle = {International Conference on Nanoscience and Technology}, series = {International Journal of Nanoscience Series}, volume = {4}, number = {5-6}, year = {2005}, note = {International Conference on Nanoscience and Technology, Calcutta, INDIA, DEC 17-20, 2003}, month = {DEC}, pages = {1007-1010}, publisher = {World Scientific Publ Co Pte Ltd, Po Box 128 Farrer Rd, Singapore 9128, Singapore}, organization = {World Scientific Publ Co Pte Ltd, Po Box 128 Farrer Rd, Singapore 9128, Singapore}, address = { Calcutta, India}, abstract = {

A unique polymerization reaction of alkylsilanes to siloxane nanowires, filaments and tubes in presence of gold nanoparticles and water is presented. The gold nanoparticles, which catalyze this reaction also work as templates restricting the shape of the resulting polymers into wires and tubes. High resolution transmission electron microscopy images clearly reveal the presence of gold nanoparticle at the tip of each wire supporting the template hypothesis. Elemental analyses by different methods confirm the stoichiometry to be C18H37SiO1.5, when the alkylsilane used was C18H37SiH3, thus proving that the alkyl group remains intact during the polymerization reaction.

}, keywords = {gold nanoparticles, Nanowires, siloxane polymers}, doi = {10.1142/S0219581X0500398X}, author = {Bhagavatula L. V. Prasad and Stoeva, S. and Sorensen, C. M. and Klabunde, Kenneth J. and Zaikovskii, V.}, editor = {Sanyal, M. K. and Raychaudhuri, A. K. and Chakravorty, D.} } @article { ISI:000232945400006, title = {Novel route for in-situ H2O2 generation from selective reduction of O-2 by hydrazine using heterogeneous Pd catalyst in an aqueous medium}, journal = {Chemical Communications}, number = {43}, year = {2005}, month = {OCT}, pages = {5399-5401}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hydrogen peroxide in high yields can be generated with high efficiency at mild conditions (25 degrees C and atmospheric pressure) with the formation of only environment-friendly by-products (N-2 and H2O) by a reduction of O-2 by hydrazine from its hydrate/salt with its complete conversion in a short reaction period (\<= 0.5 h) using a easily separable supported Pd catalyst (Pd/Al2O3, Pd/Ga2O3 or Pd/C) in an acidic aqueous medium in the presence of bromide anions; the presence of both acid (protons) and bromide anions is essential for the selective reduction of O-2 by hydrazine to H2O2 and in their absence, the reaction leads only to the formation of water.

}, issn = {1359-7345}, doi = {10.1039/b510543a}, author = {Choudhary, Vasant R. and Samanta, C. and Jana, Prabhas} } @article { ISI:000232341100010, title = {Photodegradation of ethylene/propylene/polar monomers co- and terpolymers. I - Prepared by group 4 catalyst systems}, journal = {Journal of Macromolecular Science-Pure and Applied Chemistry}, volume = {A42}, number = {9}, year = {2005}, month = {SEP}, pages = {1259-1270}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

The photooxidative degradation behavior of polyethylene, its copolymers (propylene/polar monomers) and terpolymers, synthesized by a group 4 catalyst system, has been studied by Fourier transform infrared spectroscopy and confirmed with scanning elecrton microscopy for morphological changes. The kinetics of photodegradation has also been studied. Surface damage caused by polychromatic (\>= 290 nm) at 55 degrees C in air is presented in different micrographs. The rate of photodegradation is very fast in terpolymers containing polar monomers as compared with copolymers and polyethylene. Morphological study of these photodegraded samples showed a very good relation with photodegradation results.

}, keywords = {functional polyolefins, Photodegradation, UV irradiation}, issn = {1060-1325}, doi = {10.1080/10601320500189570}, author = {Fernandes, Susete N. and Correia, Sandra and Prasad, A. V. and Reddy, K. R. and Rana, S. and Lonkar, Sunil P. and Marques, Maria M. and Singh, R. P.} } @article { ISI:000233515400012, title = {Podborer (Helicoverpa armigera Hubn.) does not show specific adaptations in gut proteinases to dietary Cicer arietinum Kunitz proteinase inhibitor}, journal = {Journal of Insect Physiology}, volume = {51}, number = {11}, year = {2005}, month = {NOV}, pages = {1268-1276}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We investigated the response of Helicoverpa armigera larvae towards ingestion of Cicer arietinum Kunitz proteinase inhibitor (CaKPI), which caused antagonistic effects on developing H. armigera larvae. CaKPI-degrading proteinases were not detectable in either control or sensitized larvae. There were negligible increases in total proteinase activity, as well as in trypsin-like and chymotrypsin-like activities of H. armigera gut proteinases (HGPs). Decrease in sensitivity of HGPs to inhibition by CaKPI was not observed when the inhibitor was fed Suggesting that the insect had not shown a specific adaptive response to dietary CaKPI. Semi-quantitative reverse transcriptase polymerase chain reaction (Q RT-PCR) analysis showed a general up-regulation of proteases in larvae that ingested CaKPI and a specific regulation of individual transcripts was not observed. CaKPI had maximum inhibitory activity against HGP derived from fourth instar larvae. CaKPI was equally potent in inhibition of HGPs derived from larvae fed on different host plants, as well as various proteinase inhibitors (Pis) to which larval adaptation was previously reported. The lack of larval response to CaKPI was attributable to the atypical active site sequence and inhibitory activity of CaKPI and/or to the pre-adaptation of H. armigera larvae due to the constant exposure to basal levels of CaKPI in chickpea seeds or a chickpea seed-based diet. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Cicer arietinum, Helicoverpa armigera, insect response, proteinase, Proteinase inhibitor}, issn = {0022-1910}, doi = {10.1016/j.jinsphys.2005.07.005}, author = {Srinivasan, A. and Chougule, Nanasaheb P. and Giri, Ashok P. and Gatehouse, J. A. and Gupta, Vidya S.} } @article { ISI:000228868600016, title = {Rapid hydrothermal synthesis route for nanocrystalline SrZrO3 using reactive precursors}, journal = {Materials Science and Engineering B-Solid State Materials for Advanced Technology}, volume = {119}, number = {1}, year = {2005}, month = {MAY}, pages = {87-93}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Synthesis of nanocrystalline, orthorhombic (space group Pnma) SrZrO3 was achieved using appropriate molar proportions of nitrate salts of strontium and zirconium as precursors. Formation of SrZrO3 (SZ) was facilitated hydrothermally in time period as less as half-an-hour, in aqueous medium with alkaline pH as confirmed by XRD. Sample characterization was performed by FT-IR spectroscopy; powder XRD, SEM, TEM and DSC. The results have been explained by proposing a suitable reaction mechanism based on the step-wise analysis of the reaction intermediates using FT-IR as well as XRD. A double cation hydroxide composite formation is anticipated that under hydrothermal conditions results in the formation of SrZrO3. Morphology of the samples was determined with the help of SEM and TEM. The particle size distribution as seen from the TEM micrograph lies in the range of 15-25 nm. Heats of reaction for different decomposition steps were obtained by DSC. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Crystallization, diffraction, Electron microscopy, infrared spectroscopy}, issn = {0921-5107}, doi = {10.1016/j.mseb.2005.01.007}, author = {Athawale, Anjali A. and Chandwadkar, Asha J. and Karandikar, Prashant R. and Bapat, Malini S.} } @article { ISI:000233062500003, title = {Role of a co-metal in bimetallic Ni-Pt catalyst for hydrogenation of m-dinitrobenzene to m-phenylenediamine}, journal = {Applied Catalysis A-General}, volume = {295}, number = {1}, year = {2005}, month = {OCT}, pages = {23-30}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ni-Pt catalysts supported on carbon were found to give very high turn over frequency numbers and almost complete selectivity to m-phenylenediamine in m-dinitrobenzene hydrogenation as compared to the monometallic nickel catalysts. The XRD and XPS characterization revealed that most of the nickel remains as Ni2+ in a monometallic catalyst while, the addition of platinum leads to the stabilization of Ni-0 state, in case of bimetallic catalysts. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic catalyst, Catalytic hydrogenation, m-dinitrobenzene, m-phenylenediamine, Selective hydrogenation, turn over number, XPS and XRD of nickel}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.07.050}, author = {Telkar, M. M. and Nadgeri, J. M. and Rode, C. V. and Chaudhari, R.} } @article { ISI:000226532000006, title = {Selective synthesis of N,N-dimethyl aniline derivatives using dimethyl carbonate as a methylating agent and onium salt as a catalyst}, journal = {Journal of Molecular Catalysis A - Chemical}, volume = {226}, number = {1}, year = {2005}, month = {FEB}, pages = {49-56}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

N-Alkylation of anilines by dimethyl carbonate (DMC) catalyzed by onium salts has been demonstrated. The work presented here shows that a simple catalytic system consisting of onium salts in the presence of a small amount of water is extremely effective in enhancing the DMC mediated N-alkylation of anilines to dialkylated products. The effect of reaction conditions on the synthesis of N,N-dimethyl aniline (NNDMA) from aniline and DMC has been investigated. Under the optimized conditions highest yield of NNDMA obtained was 99.8\%, which is the best reported for liquid phase N-alkylation of aniline using DMC. The role of water in enhancing the yield of NNDMA is explained and a reaction-networking scheme is constructed, which summarizes the chemistry behind liquid phase N-alkylation of anilines by DMC. The catalyst has been shown to recycle up to five times and at the end of fifth recycle almost 98\% of NNDMA yields were obtained. (C) 2004 Elsevier B.V. All rights reserved.

}, keywords = {Aniline, Dimethyl carbonate, methylation, N, N-alkylation, N-dimethyl aniline, onium salts}, issn = {1381-1169}, doi = {10.1016/j.molcata.2004.09.025}, author = {Shivarkar, A. B. and Gupte, S. P. and Chaudhari, Raghunath V.} } @article { ISI:000228267300014, title = {Simple, concise, stereocontrolled synthesis of (8E,10Z)-pentadecadien-1-ol acetate}, journal = {Synthetic Communications}, volume = {35}, number = {7}, year = {2005}, month = {AUG}, pages = {987-994}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A simple, concise, and stereocontrolled synthesis of (8E, 10Z)-pentadecadien-l -ol acetate involving a Cadiot-Chodkiewicz reaction as the key step is described.

}, keywords = {acetate, Acrobasis vaccini, Cadiot-Chodkiewicz reaction, diacetylene, Pheromone}, issn = {0039-7911}, doi = {10.1081/SCC-200051715}, author = {Chavan, Subhash P. and Kharul, Rajendra K. and Kamat, Subhash K. and Kalkote, Uttam R. and Kale, R. R.} } @article { ISI:000229376400013, title = {Simplistic expedient and practical synthesis of (+/-)-alpha-lipoic acid}, journal = {Synthesis-Stuttgart}, number = {8}, year = {2005}, month = {MAY}, pages = {1297-1300}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

Synthesis of a-lipoic acid has been achieved by a simple sequence of reactions. The synthesis highlights the use of alpha-chloroesters in a Reformatsky reaction. The intermediate keto acid is an intermediate from which both isomers of lipoic acid can be prepared.

}, keywords = {alpha-chloroesters, alpha-lipoic acid, Ozonolysis, Reformatsky reaction}, issn = {0039-7881}, doi = {10.1055/s-2005-861867}, author = {Chavan, Subhash P. and Shivsankar, K. and Pasupathy, K.} } @article { ISI:000230521800024, title = {Simultaneous conversion of methane and methanol into gasoline over bifunctional Ga-, Zn-, In-, and/or Mo-modified ZSM-5 zeolites}, journal = {Angewandte Chemie-International Edition}, volume = {44}, number = {28}, year = {2005}, month = {JUN}, pages = {4381-4385}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, keywords = {gallium, heterogeneuos catalysis, methane activation, Molybdenum, zeolites}, issn = {1433-7851}, doi = {10.1002/anie.200500694}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Mulla, Shafeek Abdul Rashid} } @article { ISI:000227508600006, title = {Stereoselective synthesis of (2S,7S)-7-(4-phenoxymethyl)2-(1-N-hydroxyureidyl-3-butyn-4-yl)oxepane: a potential anti-asthmatic drug candidate}, journal = {Tetrahedron-Asymmetry}, volume = {16}, number = {5}, year = {2005}, month = {MAR}, pages = {935-939}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We have achieved a short, efficient stereoselective synthesis of 7-membered oxepane derivatives with potential against asthma. Highlights of our synthetic strategy are regioselective oxidation of a hydroxyl group and efficient ring closure of an open chain aldehyde to a 2-benzenesulfonyl oxepane derivative with PhSO2H. Surprisingly the cis-isomer showed better activity than the traps-isomer. (C) 2005 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2005.01.024}, author = {Gurjar, M. K. and Rao, B. V. and Krishna, L. M. and Chorghade, Mukund S. and Ley, S. V.} } @article { ISI:000227411400039, title = {Stereoselective synthesis of (-)-microcarpalide}, journal = {Tetrahedron Letters}, volume = {46}, number = {11}, year = {2005}, month = {MAR}, pages = {1939-1941}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A highly convergent and efficient synthesis of (-)-microcarpalide, a 10-membered lactone displaying remarkable microfilament disrupting activity is described. Ring-closing metathesis and Sharpless asymmetric dihydroxylations are the key steps. Our strategy highlights the application of novel hydroxy lactone precursors for the stereoselective synthesis of (-)-microcarpalide. (C) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {4-diol, cis-2-butene-1, Claisen ortho ester rearrangement, microcarpalide, Ring-closing metathesis, sharpless asymmetric dihydroxylation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2005.01.052}, author = {Chavan, Subhash P. and Praveen, C.} } @article { ISI:000228412500017, title = {Structural rationalisation of co-crystals formed between trithiocyanuric acid and molecules containing hydrogen bonding functionality}, journal = {Chemistry - A European Journal}, volume = {11}, number = {8}, year = {2005}, note = {Symposium on Chemistry-A European Conference - Stimulating Concepts in Chemistry, Inst Sci Ingenierie Supramoleculaires, Strasbourg, FRANCE, APR 15, 2005}, month = {APR}, pages = {2433-2439}, publisher = {WILEY-BLACKWELL}, type = {Article}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

Crystallisation of trithiocyanuric acid (TTCA) from various organic solvents that have hydrogen bonding capability (acetone, 2-butanone, dimethylformamide, dimethyl sulfoxide, methanol and acetonitrile) leads to the formation of co-crystals in which the solvent molecules are incorporated together with TTCA in the crystal structure. Structure determination by single-crystal X-ray diffraction reveals that these co-crystals can be classified into different groups depending upon the topological arrangement of the TTCA molecules in the crystal structure. Thus, three different types of single-tape arrangements of TTCA molecules and one type of double-tape arrangement of TTCA molecules are identified. In all co-crystals, hydrogen-bonding interactions are formed through the involvement of N-H bonds of TTCA molecules in these tapes and the other molecule in the co-crystal. Detailed rationalisation of the structural properties of these co-crystals is presented.

}, keywords = {crystal engineering, hydrogen bonds, nitrogen heterocycles, structure elucidation}, issn = {0947-6539}, doi = {10.1002/chem.200400340}, author = {Ahn, Sung-Hoon and PrakashaReddy, J. and Kariuki, B. M. and Chatterjee, S. and Ranganathan, A. and Pedireddi, V. R. and Rao, C. N. R. and Harris, Kenneth D. M.} } @article { ISI:000234330700013, title = {Studies on the lactic-fermentation of sugar apple (Annona squamosa L.) puree}, journal = {Journal of Food and Drug Analysis}, volume = {13}, number = {4}, year = {2005}, month = {DEC}, pages = {377-381}, publisher = {NATL LABORATORIES FOODS DRUGS}, type = {Article}, address = {161-2 KUEN YANG STREET, NANKANG, TAIPEI, TAIWAN}, abstract = {

Sugar apple (Annona squamosa L.) is a fruit tree of economic importance in Taiwan, with the fruit primarily consumed fresh. Overproduction in recent years, coupled with short shelf life and other practical issues, make practical the research into uses for sugar apples in formats other than fresh. This study presents an exploration of lactic-fermented sugar apple products. The product has a unique sweet aroma and a test panel found its texture to be appealing. For this study, sugar apple puree was used as the substrate for fermentation using mixed starters in a ratio 1:1 or 1:1:1. The high total soluble solid nature (20.5 +/- 4.33 degrees Brix) of sugar apple puree as compared to that of mixed fruit juice (lower than 10 Brix) indicates its potential to be used in fermentation. Following fermentation, the properties and effects of different starter inoculations were recorded and discussed. Fermentation achieved a pH value of 3.8 after 60 hr. The performance of fermented product in the DPPH (alpha,alpha-diphenyl-beta- picrylhydrazyl) decreased from 92\% to 78\% after 48 hr, followed by a stationary state. Fermented sugar apple puree and fresh sugar apple juice blended in a ratio of 2:8 delivered the highest DPPH scavenging efficiency (88\%) and iron chelating ability (49\%). The relatively high values of these properties offer the potential for sugar apple juice to be further developed as a novel functional food. Such a development would surely help to ease recent overproduction problems.

}, keywords = {annonaceae, DPPH scavenging, Fermentation, Lactobacillus}, issn = {1021-9498}, author = {Tien, Y. Y. and Ng, C. C. and Chang, C. C. and Tseng, W. S. and Kotwal, S. and Shyu, Y. T.} } @article { ISI:000232886800008, title = {Synthesis and analysis of ZnO and CdSe nanoparticles}, journal = {Pramana-Journal of Physics}, volume = {65}, number = {4, SI}, year = {2005}, note = {1st National Conference on Nanoscience and Technology, Pune, INDIA, MAR 07-08, 2005}, month = {OCT}, pages = {615-620}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Zinc oxide and cadmium selenide particles in the nanometer size regime have been synthesized using chemical routes. The particles were capped using thioglycerol in case of ZnO and 2-mercaptoethanol in case of CdSe to achieve the stability and avoid the coalescence. Zinc oxide nanoparticles were doped with europium to study their optical properties. A variety of techniques like UV-Vis absorption spectroscopy, X-ray diffraction (XRD), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) were used to carry out structural and spectroscopic characterizations of the nanoparticles.

}, keywords = {chemical capping, Doping, Nanoparticles, photoluminescence}, issn = {0304-4289}, doi = {10.1007/BF03010449}, author = {Ashtaputre, S. S. and Deshpande, Aparna and Marathe, Sayali and Wankhede, M. E. and Chimanpure, J. and Pasricha, R. and Urban, J. and Haram, Santosh K. and Gosavi, S. W. and Kulkarni, S. K.} } @article { ISI:000234350400019, title = {Synthesis and swelling behaviour of hydrophobically modified responsive polymers in dilute aqueous solutions}, journal = {Polymer}, volume = {46}, number = {26}, year = {2005}, month = {DEC}, pages = {12190-12199}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

New series of associating polymers were synthesised in order to investigate opposite behaviours of hydrophobically modified water-soluble polymers and thermoresponsive water-soluble polymers carrying LCST stickers. On the basis of a poly(acrylic acid) backbone, amino-terminated poly(N-isopropylacrylamide), poly(ethylene oxide-co-propylene oxide) and/or dodecyl chains were grafted following a reaction of condensation activated by carbodiimide. Two homologous series of well-defined single grafted and double grafted copolymers were obtained, with double grafted chains containing both C12 and LCST grafts. The dilute solution properties of these copolymers were carefully studied by capillary viscometry. At low salt concentration and below the LCST of the grafts, the swelling properties of macromolecular chains are controlled either by intramolecular associations between hydrophobes, excluded volume effect exerted by hydrophilic grafts or by a balance between these opposite interactions. The deswelling of macromolecular chains, induced by hydrophobic interactions, is amplified at higher ionic strength and more particularly above the transition temperature of the side chains. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {associating polymers, poly(acrylic acid), viscometry}, issn = {0032-3861}, doi = {10.1016/j.polymer.2005.10.140}, author = {Iyer, N. P. and Hourdet, Dominique and Badiger, Manohar V. and Chassenieux, Christophe and Perrin, P. and Wadgaonkar, P.} } @article { ISI:000232712200011, title = {Synthesis, characterization and catalytic activity of Mn(III)- and Co(II)-salen complexes immobilized mesoporous alumina}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {241}, number = {1-2}, year = {2005}, month = {NOV}, pages = {79-87}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mn(III) and Co(II)-schiff base complexes were immobilized over mesoporous alumina through the reaction of mesoporous alumina functionalized 3-aminopropyl triethoxy silane (3-APTES) and salicylic aldehyde via schiff base condensation. The surface properties of the functionalized catalysts were analyzed by a series of characterization techniques like elemental analysis, PXRD, FTIR, N(2) adsorption-desorption, TG-DTG, DR UV-vis, XPS, etc. PXRD and adsorption-desorption analysis shows that the mesostructure of alumina remains intact after various modifications, while spectral technique show the successful anchoring of the neat complexes inside the porous alumina support. The catalytic activity of the functionalized metal-salen complexes examined in the liquid phase oxidation of styrene and cyclohexene shows that the functionalized salen complexes are more active and selective than the corresponding neat metal complexes. Further, the catalyst (Mn-S-NH(2)-MA) was recycled three times in the oxidation of styrene and no major change in the conversion and selectivity is observed, which shows that the immobilized metal-salen complexes are stable under the present reaction conditions. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Immobilization, Mesoporous alumina, Oxidation, Schiff base complexes}, issn = {1381-1169}, doi = {10.1016/j.molcata.2005.07.005}, author = {Chaube, V. D. and Shylesh, S. and Singh, A. P.} } @article { ISI:000228575900018, title = {Synthesis of (+)-camptothecin}, journal = {Arkivoc}, volume = {2005}, number = {3}, year = {2005}, month = {JAN}, pages = {165-169}, publisher = {ARKAT USA INC}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

A synthesis of optically pure camptothecin was achieved in 4 steps from previously reported aldehyde employing Sharpless asymmetric dihydroxylation as the key step.

}, keywords = {Anticancer, camptothecin, sharpless asymmetric dihydroxylation}, doi = {10.3998/ark.5550190.0006.318}, author = {Chavan, Subhash P. and Venkatraman, M. S.} } @article { ISI:000227108800014, title = {Temperature-induced phase transitions of the ordered superlattice assembly of Au nanoclusters}, journal = {Journal of Physical Chemistry B}, volume = {109}, number = {7}, year = {2005}, month = {FEB}, pages = {2552-2558}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Superlattices of monolayer protected metallic and semiconducting nanoclusters have attracted significant attention due to their promising applications in nanotechnology. In this paper, we investigate the effect of temperature on the ordered superlattice structure of relatively larger sized An nanoclusters passivated with dodecanethiol [ca. Au-1415(RS)(328)] with the help of in situ temperature controlled X-ray diffraction (XRD) and infrared spectroscopy (IR) in conjunction with thermogravimetric (TG) and differential scanning calorimetric (DSC) analysis. In brief, monolayer protected Au nanoclusters (AuMPC) were prepared by a modified Brust synthesis technique, where dodecanethiol itself acts as both phase transfer and simultaneous capping agent during the reduction process, generating an average particle size of 3.72+/-0.4 nm after repeated solvent extraction and careful fractionation experiments. These particles are characterized with the help of UV-vis, transmission electron microscopic (TEM), IR, and NMR techniques, where effective capping as well as the superlattice formation on the TEM grid is evident from the combined analysis of these results. In situ low-angle XRD analysis shows that the particles undergo an irreversible phase transition in the temperature range of 100-115degreesC, which is also reflected in the data from in situ IR analysis. However, the DSC analysis does not account for this phase transition, although the reversible phase transition due to the alkyl chain dynamics is in good agreement with the previously reported results. These results indicate the formation of temperature-induced, diffusion-limited phase transition involving nonequilibrium fractal structures, which is in good agreement with the previous available theoretical studies. The determination of the temperature window for the stability of these ordered assemblies would be used to understand the effect of thermal stress for device applications.

}, issn = {1520-6106}, doi = {10.1021/jp045709x}, author = {Chaki, N. K. and Vijayamohanan, K. P.} } @article { ISI:000227960800029, title = {Thermal, magnetic and spectral studies of metal-quinone complexes Part III. radical coordination and hydrogen bonding mediated exchange interaction in copper-hydroxyquinone complex}, journal = {Journal of Thermal Analysis and Calorimetry}, volume = {79}, number = {3}, year = {2005}, month = {FEB}, pages = {669-675}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The reaction of CuCl with 2HNQ, ( viz. 2- hydroxy- 1,4- naphthoquinone), in methanol results in [Cu-2( II, II)(4HNSQ)(2)(ONQ)(2)(H2O)(4)], Cu- 3 complex; [ where ONQ is the deprotonated oxidized form of ligand ( viz. 2- oxido- 1,4- naphthoquinone) and 4HNSQ one electron reduced tautomeric form of the ligand (i.e. 4- hydroxy - 1,2- naphthosemiquinone)]. The mixed valent redox ligation is confirmed in [ 9] by us. In present report complex Cu- 3 investigated by variable temperature magnetic susceptibility measurements ( SQUID), X and Q- band EPR, DSC and CV techniques. A break is observed in the chi(m)(-1) vs. T plot similar to 200 K in Cu- 3 which is attributed to a phase transition. In Cu- 3 a quintet state ( S= 2) is populated above 200 K by the molecular association of two exo Cu( II)( 4HNSQ) units via hydrogen bonding between Cu(ONQ) unit of endo ligands in dimer. Magnetic susceptibility data is treated with tetramer model with S= 1/2,1/2,1/2,1/2. The interdimer triplet- triplet interaction ( J) in two [ Cu( 4HNSQ)] units and intradimer ( zJ(1)) interaction between [ Cu( II)( 4HNSQ)] are best fitted with J= -50 cm(-1) and zJ(1)= 28 cm(-1), respectively, using g= 2.2. {\textquoteleft}Quintet- triplet{\textquoteright} phase transition occurs with an enthalpy change of 31.83 kJ mol(-1) estimated from DSC. Cu( II)double left right arrow Cu( I) and NSQ double left right arrow CAT redox couples at E-1/2= 0.68 V and E-1/2 = -1.12 V, respectively are result of exo ligands and Cu( II) ions interaction, while shifts of ligand based peaks viz. NQ -\> NSQ and NSQ double left right arrow CAT at - 0.44 and - 0.67 V towards positive potential on complexation are due to electron transfer interactions between endo ligand and Cu( II) ion.

}, keywords = {antiferromagnetic coupling, copper complexes, Lawsone, model complexes, quinones, triplet state}, issn = {1388-6150}, author = {Salunke-Gawali, S. and Rane, S. Y. and Boukheddaden, K. and Codjovi, E. and Linares, J. and Varret, F. and Bakare, P. P.} } @article { ISI:000230613600002, title = {Unraveling biochemical properties of cockroach (Periplaneta americana) proteinases with a gel X-ray film contact print method}, journal = {Comparative Biochemistry and Physiology B-Biochemistry \& Molecular Biology}, volume = {141}, number = {3}, year = {2005}, month = {JUL}, pages = {261-266}, publisher = {ELSEVIER SCIENCE INC}, type = {Article}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Eleven proteinase activity bands were detected in American cockroach (Periplaneta americana) gut. These were partially purified and characterized using a gel X-ray film contact print method. Cockroach gut proteinases (CGPs) show activity over a broad range of pH with maximum activity between pH 6 and 10, and optimal activity at 50-70 degrees C. CGPs were partially purified by preparative gel electrophoresis and analyzed using synthetic substrates and inhibitors. Four of the proteases exhibited chymotrypsin-like (C1 to C4) activity and seven trypsin-like (T I to T7) activity. Accuracy of the gel X-ray film contact print method is confirmed by including bovine chymotrypsin in CGP analysis. Inhibition of CGPs with different plant proteinaceous proteinase inhibitors allowed identification of potential CGP inhibitors. Our results imply that presence of several CGP activity bands, and their stability and activity over a broad pH and temperature range might contribute to adaptation of P americana to extreme environmental conditions and the polyphagous nature of the species. (c) 2005 Elsevier Inc. All rights reserved.

}, keywords = {activity visualization, cockroach, gut enzymes, Periplaneta americana, plant proteinase inhibitors, Proteinases}, issn = {1096-4959}, doi = {10.1016/cbpc.2005.02.015}, author = {Hivrale, Vandana K. and Chougule, Nanasaheb P. and Chhabda, Pavan J. and Giri, Ashok P. and Kachole, M. S.} } @article { ISI:000227346300059, title = {Unusual monodentate binding mode of 2,2 {\textquoteleft}-dipyridylamine (L) in isomeric trans(acac)(2)Ru-II(L)2, trans-[(acac)(2)Ru-III(L)(2)]ClO4, and cis-(acac)(2)Ru-II(L)(2) (acac = acetylacetonate). Synthesis, structures, and spectroscopic, electrochemical, and magn}, journal = {Inorganic Chemistry}, volume = {44}, number = {5}, year = {2005}, month = {MAR}, pages = {1571-1579}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{The reaction of cis-Ru(acac)(2)(CH3CN)(2) (acac = acetylacetonate) with 2,2{\textquoteright}-dipyridylamine (L) in ethanolic medium resulted in facile one-pot synthesis of stable [(acac)(2)Ru-III(L)]ClO4 ([1]ClO4), trans-[(acac)(2)Ru-II(L)2] (2), trans[(acac)(2)Ru-III(L)(2)[ClO4 ([2]ClO4), and cis-[(acac)(2)Ru-II(L)(2)] (3). The bivalent congener 1 was generated via electrochemical reduction Of [1]ClO4. Although in [1](+) the dipyridylamine ligand (L) is bonded to the metal ion in usual bidentate fashion, in 2/[2](+) and 3, the unusual monodentate binding mode of L has been preferentially stabilized. Moreover, in 2/[2](+) and 3, two such monodentate L{\textquoteright}s have been oriented in the trans- and cis-configurations, respectively. The binding mode of L and the isomeric geometries of the complexes were established by their single-crystal X-ray structures. The redox stability of the Ru(II) state follows the order 1 \< 2 much less than 3. In contrast to the magnetic moment obtained for [1]ClO4

}, issn = {0020-1669}, doi = {10.1021/ic049219v}, author = {Kar, S. and Chanda, N. and Mobin, Shaikh M. and Urbanos, F. A. and Niemeyer, M. and Puranik, Vedavati G. and Jimenez-Aparicio, Reyes and Lahiri, Goutam Kumar} } @article { ISI:000231782100007, title = {Unusual stereochemical outcome of radical cyclization: synthesis of (+)-biotin}, journal = {Tetrahedron}, volume = {61}, number = {39}, year = {2005}, month = {SEP}, pages = {9273-9280}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An enantioselective synthesis of (+)-biotin 1 starting from naturally available cysteine is described. The key steps are the unusual stereochemical outcome of radical cyclization of compound 10 to prepare 5,5-fused system 11, and the introduction of C4-sidechain at C-6 in 13 via a Grignard reaction. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {biotin, exocyclization, radical cyclization}, issn = {0040-4020}, doi = {10.1016/j.tet.2005.07.070}, author = {Chavan, Subhash P. and Chittiboyina, A. G. and Ramakrishna, G. and Tejwani, R. B. and Ravindranathan, T. and Kamat, Subhash K. and Rai, B. and Sivadasan, L. and Balakrishnan, K. and Ramalingam, S. and Deshpande, V. H.} } @article { ISI:000226929600009, title = {Vapour phase oxidation of acetophenone to benzoic acid over binary oxides of V and Mo}, journal = {Chemical Engineering Research and Design}, volume = {83}, number = {A1}, year = {2005}, month = {JAN}, pages = {75-80}, publisher = {INST CHEMICAL ENGINEERS}, type = {Article}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

Test data for catalytic oxidation of acetophenone into benzoic acid performed at bench scale with V2O5-MoO3 catalyst in a continuous downflow metal reactor are presented. The process parameters such as temperature and flow rate influence the product distribution. The P2O5, B2O3 and Na2O when used as dopant on V2O5-MoO3 catalyst showed marked influence on activity and selectivity. An acidic catalyst like V2O5-MoO3-P2O5 favours formation of benzoic acid while a basic catalyst like V2O5-MoO3-Na2O favours formation of benzaldehyde. The addition of Na2O into V2O5-MoO3 binary oxides formed new phases (NaVMoO6 and Na2V2Mo3O15), which increased Arrhenius activation energy from 18.24 to 31.35 kcal mol(-1).

}, keywords = {acetophenone, activity, benzoic acid, carbon oxides, oxidation of acetophenone, selectivity}, issn = {0263-8762}, doi = {10.1205/cherd.03206}, author = {Chumbhale, Vilas R. and Paradhy, S. A. and Anilkumar, Mettu and Kadam, S. T. and Bokade, Vijay V.} } @article { ISI:000241010400014, title = {Characterization of Cd1-xZnxSe thin films deposited at low temperature by chemical route}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {17}, number = {12}, year = {2006}, month = {DEC}, pages = {1055-1063}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Optoelectronic technologically important pseudo-binary Cd1-xZnxSe thin films with a variable composition ( 0 \< x \< 1) has been developed by chemical bath deposition method. The objective to study growth kinetics, physical, microscopic, compositional, optical, electrical and structural changes. Cd1-xZnxSe have been deposited on non-conducting glass substrate in tartarate bath containing Cd+2 and Zn+2 ions with sodium selenosulphate with an aqueous alkaline medium at 278 K. The quality and the thickness of the films are depends upon deposition temperature, deposition time and pH, etc. X-ray diffraction (XRD), atomic absorption spectroscopy, optical absorption, scanning electron microscopy and thermoelectric technique characterized the films. The XRD study indicates the polycrystalline nature in single cubic phase over whole range of composition. Analysis of absorption spectra gave direct type band gap, the magnitude of which increases non-linearly as zinc content in the film is increased and dc electrical conductivity at room temperature was found to decreases from 10(-7) to 10(-8) (Omega cm)(-1). All the films show n-type conductivity. The promising features observed are the formation of continuous solid solutions in a single cubic phase.

}, issn = {0957-4522}, doi = {10.1007/s10854-006-9034-2}, author = {Hankare, P. P. and Chate, P. A. and Asabe, M. R. and Delekar, S. D. and Mulla, Imtiaz S. and Garadkar, K. M.} } @article { ISI:000239818300010, title = {Clay-mediated selective hydrolysis of 5 {\textquoteleft}-O-acetyl-2 {\textquoteleft},3 {\textquoteleft}-isopropylidene/cyclohexylidene nucleosides}, journal = {Synthetic Communications}, volume = {36}, number = {16}, year = {2006}, month = {AUG}, pages = {2321-2327}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A generalized procedure for the selective hydrolysis of 5{\textquoteright}O-acetyl-2{\textquoteright},3{\textquoteright}-isopropylidene/cyclohexylidene nucleosides with a solid catalyst, Montmorillonite K-10 in refluxing methanol, to furnish 5{\textquoteright}-O-acetyl-nucleosides is described.

}, keywords = {5-O-acetylnucleosides, isopropylidene-nucleoside hydrolysis, montmorillonite K 10}, issn = {0039-7911}, doi = {10.1080/00397910600639968}, author = {Gurjar, Mukund K. and Mondal, Dhananjoy and Ravindranadh, S. V. and Chorghade, Mukund S.} } @article { ISI:000238812600009, title = {CO2 reforming of methane combined with steam reforming or partial oxidation of methane to syngas over NdCoO3 perovskite-type mixed metal-oxide catalyst}, journal = {Applied Energy}, volume = {83}, number = {9}, year = {2006}, month = {SEP}, pages = {1024-1032}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

CO2 reforming with simultaneous steam reforming or partial oxidation of methane to syngas over NdCoO3 perovskite-type mixed metal oxide catalyst (prereduced by H-2) at different process conditions has been investigated. In the simultaneous CO2 and steam reforming, the conversion of methane and H2O and also the H-2/CO product ratio are strongly influenced by the CO2/H2O feed-ratio. In the simultaneous CO2 reforming and partial oxidation of methane, the conversion of methane and CO2, H-2 selectivity and the net heat of reaction are strongly influenced by the process parameters (viz. temperature, space velocity and relative concentration of O-2 in the feed). In both cases, no carbon deposition on the catalyst was observed. The reduced NdCoO3 perovskite-type mixed-oxide catalyst (Co dispersed on Nd2O3) is a highly promising catalyst for carbon-free CO2 reforming combined with steam reforming or partial oxidation of methane to syngas. (c) 2005 Published by Elsevier Ltd.

}, keywords = {Co/Nd2O3 catalyst, methane, NdCoO3 perovskite-type mixed metal-oxide catalyst, Oxy-CO2 reforming of methane, simultaneous CO2 and steam reforming of methane}, issn = {0306-2619}, doi = {10.1016/j.apenergy.2005.09.008}, author = {Choudhary, Vasant R. and Mondal, Kartick C.} } @article { ISI:000238258500019, title = {CO2 reforming of methane to syngas over CoOx/MgO supported on low surface area macroporous catalyst carrier: Influence of Co loading and process conditions}, journal = {Industrial \& Engineering Chemistry Research}, volume = {45}, number = {13}, year = {2006}, month = {JUN}, pages = {4597-4602}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The effect of Co loading (5-30 wt \%) and process parameters ( reduction pretreatment, reaction temperature, and space velocity) have been investigated over CoOx/MgO(5\%)/SA-5205 catalyst for the CO2 methane reforming process. The Co loading had a profound effect on the methane conversion and the hydrogen selectivity ( initial and time-on-stream activity) for the unreduced catalysts. While negligible methane conversion was observed for the 5 and 10 wt \% Co loading catalyst, methane conversions \> 95\% were obtained over the high Co loading ( 20 and 30 wt \%) catalysts; hydrogen selectivity followed the same trend as methane conversion. The Co loading level had a relatively smaller influence in the case of the reduced catalysts. While the 5 wt \% Co catalyst showed low methane conversion activity (\< 30\%), the 10 wt \% Co catalyst showed methane conversion levels comparable to those of the high Co loading catalysts. The high Co loading catalysts showed an excellent time-on-stream performance for the CO2 methane reforming reaction. X-ray diffraction and temperature-programmed reduction experiments indicate that the interesting activity behavior exhibited by the catalysts is related to the different phases ( and their reducibility) present in the catalysts at different Co loadings. The hydrogen selectivity was found to decrease with decreasing reaction temperature and increasing space velocity due to the increased simultaneous occurrence of the reverse water-gas shift reaction along with the CO2 reforming reaction.

}, issn = {0888-5885}, doi = {10.1021/ie060260a}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000238220900056, title = {Construction of conductive multilayer films of biogenic triangular gold nanoparticles and their application in chemical vapour sensing}, journal = {Nanotechnology}, volume = {17}, number = {9}, year = {2006}, month = {MAY}, pages = {2399-2405}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Metal nanoparticles are interesting building blocks for realizing films for a number of applications that include bio- and chemical sensing. To date, spherical metal nanoparticles have been used to generate functional electrical coatings. In this paper we demonstrate the synthesis of electrically conductive coatings using biologically prepared gold nanotriangles as the building blocks. The gold nanotriangles are prepared by the reduction of aqueous chloroaurate ions using an extract of the lemongrass plant (Cymbopogon flexuosus) which are thereafter assembled onto a variety of substrates by simple solution casting. The conductivity of the film shows a drastic fall upon mild heat treatment, leading to the formation of electrically conductive thin films of nanoparticles. We have also investigated the possibility of using the gold nanotriangle films in vapour sensing. A large fall in film resistance is observed upon exposure to polar molecules such as methanol, while little change occurs upon exposure to weakly polar molecules such as chloroform.

}, issn = {0957-4484}, doi = {10.1088/0957-4484/17/9/055}, author = {Singh, Amit and Chaudhary, Minakshi V. and Sastry, Murali} } @article { ISI:000236960600013, title = {Contrasting solid-state structures of trithiocyanuric acid and cyanuric acid}, journal = {Crystal Growth \& Design}, volume = {6}, number = {4}, year = {2006}, month = {APR}, pages = {846-848}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Although trithiocyanuric acid (TTCA) has been investigated widely as an agent in the formation of molecular cocrystals, the crystal structure of pure TTCA has never been determined. Attempts to grow crystals of pure TTCA by crystallization from solution invariably lead to the formation of solvate cocrystals, and desolvation of these materials leads to polycrystalline powder samples. In this paper, we report the structure determination of pure TTCA directly from powder X-ray diffraction data, using the direct-space genetic algorithm technique for structure solution followed by Rietveld refinement. The structure presents interesting contrasts to that of the oxygen analogue, cyanuric acid, and alludes to the possibility that both compounds might be capable of exhibiting polymorphism.

}, issn = {1528-7483}, doi = {10.1021/cg0601094}, author = {Guo, F. and Cheung, E. Y. and Harris, Kenneth D. M. and Pedireddi, V. R.} } @article { ISI:000237525300035, title = {Densities and heat capacities of the ammonia plus water plus NaOH and ammonia plus water plus KOH solutions}, journal = {Journal of Chemical and Engineering Data}, volume = {51}, number = {3}, year = {2006}, month = {MAY}, pages = {1020-1025}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Ammonia + water + sodium hydroxide and ammonia + water + potassium hydroxide mixtures were chosen as potential candidates for absorption chillers driven by low-temperature heat sources. Heat capacity and density were studied between (293.15 and 353.15) K at a constant pressure of 1.8 MPa for these solutions using a heat flux Calvet-type calorimeter and a vibrating-tube densimeter, respectively. Measured data were well-correlated with temperature and composition using simple polynomial equations. The relative deviations between the experimental and calculated values in the density and heat capacity measurements were 0.20 \% and 0.49 \% for NH3 + H2O + NaOH solutions and 0.10 \% and 0.36 \% for NH3 + H2O + KOH solutions, respectively. Also, two density prediction methods were checked using the experimental data. Previously, it was necessary to measure the density of ammonia and hydroxide aqueous solutions in similar conditions. The results showed that both methods are suitable for predicting the density of these solutions.

}, issn = {0021-9568}, doi = {10.1021/je050512z}, author = {Salavera, D. and Libotean, S. and Patil, K. R. and Esteve, X. and Coronas, Alberto} } @article { ISI:000238728500016, title = {Direct oxidation of H-2 to H2O2 over Pd-based catalysts: influence of oxidation state, support and metal additives}, journal = {Applied Catalysis A-General}, volume = {308}, year = {2006}, month = {JUL}, pages = {128-133}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The influence of oxidation state (reduced and oxidized), support (ZrO2, Ga2O3, CeO2, SiO2, H-beta, ThO2, CeO2-ZrO2, BPO4 and Pd/Al2O3) and precious metal additives (Au, Pt, Rh and Ru) on the direct H2O2 synthesis has been investigated over Pd-based catalysts. For all the supports investigated herein, the oxidized Pd catalysts showed significantly superior H2O2 yields as compared to their reduced counterparts. The effect of the Pd oxidation state was found to be more important for determining the H2O2 yields than the particle size and surface area properties of the catalyst system. An excellent correlation was observed between the H2O2 selectivity and H2O2 decomposition activity of the oxidized Pd catalysts. The oxidized Pd catalysts showed almost an order of magnitude lower H2O2 decomposition activity than the reduced catalysts. The H2O2 yield in the H-2 to H2O2 oxidation passed through a maximum with increase in the An concentration. Although a similar effect was also observed in case of Pt, Au was found to be a superior promoter for the direct H2O2 synthesis process. Addition of Rh and Ru was found to be detrimental for the H2O2 yields; these results can be explained in terms of increased H2O2 decomposition activity and/or enhanced H-2 to H2O reaction activity in their presence. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {decomposition, direct synthesis, H2O2, metal additives, oxidation state, Pd catalysts, supports}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.04.010}, author = {Choudhary, Vasant R. and Samanta, C. and Choudhary, Tushar V.} } @article { ISI:000239542900032, title = {Direct synthesis of nanocrystalline silver from the reaction between silver carboxylates and n-trioctylphosphine}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {6}, number = {7}, year = {2006}, month = {JUL}, pages = {2095-2102}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Neat n-Trioctylphosphine (TOP) has been used for the first ever time for reduction of silver nitrate and silver carboxylates (citrate, oleate, and myristate) under mild thermal reaction conditions. UV-visible absorption measurements of re-dispersible silver particles that were obtained by reduction of silver myristrate (product-IV) and silver nitrate (product-I) showed surface plasmon resonance absorption peak at 400 nm. The powder XRD pattern of fcc zero-valent silver resulted in diameters in the range of about 25-30 nm. TEM analysis showed particle diameter similar to that was observed by the XRD. FTIR spectroscopy revealed that the organics from the carboxylate group are retained by the nano-particles in case of product-IV however, presence of TOP is observed in product-I. It is found that when silver nitrate is reduced by TOP, spherical silver nano-particles with poor redispersity are formed but extended heating results in formation of long silver rods of micrometer size however, the re-dispersible nano-particles are easily formed when silver carboxylates are reduced by TOP.

}, keywords = {Chemical synthesis, Nanocrystalline, noble metal, XRD}, issn = {1533-4880}, doi = {10.1166/jnn.2006.339}, author = {Charan, Shobhit and Singh, Narendra and Khanna, P. K. and Patil, K. R.} } @article { ISI:000240707800018, title = {Effect of annealing on properties of ZrSe2 thin films}, journal = {Journal of Crystal Growth}, volume = {294}, number = {2}, year = {2006}, month = {SEP}, pages = {254-259}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Thin films of ZrSe2 have been prepared on stainless steel and fluorine-doped tin oxide-coated glass substrates using electrodeposition technique at potentiostatic mode. Double-distilled water containing precursors Zr and Se with ethylene diamine tetra-acetic acid disodium salt as a complexing agent was used to obtain good quality deposits by controlling the rate of reaction. The preparative parameters such as concentration of bath, deposition time, bath temperature, pH of the bath and annealing temperature have been optimized using photoelectrochernical (PEC) technique. The films deposited at optimum preparative parameters are annealed at different temperatures. The film annealed at 200 degrees C shows more photosensitivity. The as-deposited and annealed films at 200 degrees C have been characterized by X-ray diffraction (XRD), energy dispersive analysis by X-ray (EDAX), optical absorption and scanning electron microscopy (SEM). The XRD analysis of the as-deposited and annealed films showed the presence of polycrystalline nature with hexagonal crystal structure. EDAX study reveals that deposited films are almost stoichiometric. Optical absorption study shows the presence of direct transition and band gap energies are found to be 1.5 and 1.38 eV, respectively, for the as-deposited and annealed films. SEM study revels that the grains are uniformly distributed over the surface of substrate for the as-deposited as well as annealed film, which indicates formation of good and compact type of crystal structure. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {band gap, EDAX, Electrodeposition, PEC, SEM, XRD, ZrSe2 thin films}, issn = {0022-0248}, doi = {10.1016/j.jcrysgro.2006.06.018}, author = {Hankare, P. P. and Asabe, M. R. and Kokate, A. V. and Delekar, S. D. and Sathe, D. J. and Mulla, Imtiaz S. and Chougule, B. K.} } @article {42506, title = {Efficient protocol for genetic transformation and shoot regeneration of turmeric (Curcuma longa L.) via particle bombardment}, journal = {Plant Cell Reports}, volume = {25}, year = {2006}, month = {MAR}, pages = {112-116}, type = {Article}, doi = {10.1007/s00299-005-0033-1}, author = {Shirgurkar, M. V. and Naik, V. B. and von Arnold, S. and Nadgauda, R. S. and Clapham, D. H.} } @article { ISI:000238030200026, title = {Electrochemical organization of monolayer protected gold nanoclusters on single-walled carbon nanotubes: significantly enhanced double layer capacitance}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {6}, number = {5}, year = {2006}, month = {MAY}, pages = {1387-1391}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

This paper reports a novel electrochemical route for anchoring monolayer protected gold nanoclusters (size 8 +/- 0.2 nm) on single-walled carbon nanotube bundles, resulting in the formation of hybrid materials. Monolayer protected gold nanoclusters prepared by modified Brust synthesis route were organized on SWNT bundles by cycling-the potential in dichloromethane between -1 to +1 V at a scan rate of 50 mV/s. Monolayer protected nanoclusters in electrolyte solutions possess ionic space charge around them (double layer charging), making them suitable for organization on nanotube bundles, by tuning the electrostatic interactions. More significantly, analysis of the double layer capacitance of these hybrid materials shows almost ten times increase in capacitance compared to that of bare SWNT bundles. We believe that these hybrid materials are potentially useful in nanoelectronics.

}, keywords = {double layer capacitance, double layer charging, hybrid materials, monolayer protected gold nanoclusters, single-walled carbon nanotubes}, issn = {1533-4880}, doi = {10.1166/jnn.2006.323}, author = {Mahima, Subhramanyam and Chaki, N. K. and Sharma, J. and Kakade, Bhalchandra A. and Pasricha, R. and Rao, A. M. and Vijayamohanan, K.} } @article { ISI:000242639200001, title = {Evolution of the stereoselective pinacol coupling reaction}, journal = {Tetrahedron}, volume = {62}, number = {52}, year = {2006}, month = {DEC}, pages = {12137-12158}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, keywords = {diastereoselective, enantioselective., pinacol coupling, reductive dimerization}, issn = {0040-4020}, doi = {10.1016/j.tet.2006.09.002}, author = {Chatterjee, A. and Joshi, Navalkishore N.} } @article { ISI:000238412100062, title = {Exfoliation-induced nanoribbon formation of poly(3,4-ethylene dioxythiophene) PEDOT between MoS2 layers as cathode material for lithium batteries}, journal = {Journal of Power Sources}, volume = {156}, number = {2}, year = {2006}, month = {JUN}, pages = {615-619}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A new type of layered nanocomposite synthesized by delaminated MoS2 nanosheets and poly(3,4-ethylenedioxythiophene) (PEDOT) are restacked to produce alternate polymer nanoribbons between layers Of MoS2 with an interlayer distance of similar to 1.38 nm. The unique properties of resulting nanocomposite are investigated by powder XRD, XPS, SEM, TEM, and four-probe conductivity measurements. The obtained nanocomposite can be used as a cathode material for a small power rechargeable lithium battery as demonstrated by the electrochemical insertion of lithium into the PEDOT/MoS2 nanocomposite. A significant enhancement in the discharge capacity (100 mAh g(-1)) is observed compared with that (40 mAh g(-1)) for MoS2. (c) 2005 Elsevier B.V All rights reserved.

}, keywords = {cathode material, lithium batteries, MoS2, organic-inorganic nanocomposite, PEDOT-nanoribbons}, issn = {0378-7753}, doi = {10.1016/j.jpowsour.2005.06.022}, author = {Murugan, A. Vadivel and Quintin, M. and Delville, M. H. and Campet, Guy and Gopinath, Chinnakonda S. and Vijayamohanan, K.} } @article { ISI:000242327500019, title = {Factors influencing decomposition of H2O2 over supported Pd catalyst in aqueous medium}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {260}, number = {1-2}, year = {2006}, month = {DEC}, pages = {115-120}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Since H2O2 decomposition can result in selectivity/yield loss in the direct H2O2 synthesis process from H-2 and O-2 over supported Pd catalysts, it is important to have an enhanced understanding about the factors affecting the H2O2 decomposition reaction. Herein, detailed studies have been undertaken to investigate the influence of different factors, such as (a) nature and concentration of acid in reaction medium, (b) nature and concentration of halide in presence and absence of acid in reaction medium, (c) pretreatment procedures and (d) catalyst modification by incorporation of different halides, on the H2O2 decomposition reaction over a 5\% Pd/C catalyst in aqueous medium at 25 degrees C. This study has shown that the H2O2 decomposition activity is profoundly influenced by all the above factors. The effectiveness of the acids in suppressing the H2O2 decomposition activity decreased in the following order: hydroiodic acid \> hydrobromic acid \> hydrochloric acid \>\> acetic acid \> phosphoric acid \> sulfuric acid \> perchloric acid. The ability of the acid to decrease the H2O2 decomposition activity was found to very strongly depend on the nature of its associated anion. Halides, such as iodide, bromide and chloride were particularly effective in suppressing the H2O2 decomposition activity. Oxidation pretreatment of the catalyst was found to strongly suppress its H2O2 decomposition activity, while a reduction treatment was found to promote its activity. A gradual decrease in the H2O2 decomposition activity of the catalyst was observed with each successive usage due to in situ sub-surface oxidation of Pd by H2O2. Halide incorporation either via the reaction medium or prior catalyst modification had a similar qualitative effect on the H2O2 decomposition activity. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {acid, H2O2 decomposition, H2O2 synthesis, halides, Pd catalysts, pretreatment}, issn = {1381-1169}, doi = {10.1016/j.molcata.2006.07.009}, author = {Choudhary, Vasant R. and Samanta, C. and Choudhary, Tushar V.} } @article { ISI:000241755300045, title = {First enantiospecific synthesis of (-)-parvifoline and (-)-curcuquinone}, journal = {Journal of Organic Chemistry}, volume = {71}, number = {23}, year = {2006}, month = {NOV}, pages = {8986-8988}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The first enantiospecific synthesis of (-)-parvifoline, employing ring-closing metathesis as the key step, and (-)-curcuquinone from naturally occurring (R)-(+)-citronellal is described.

}, issn = {0022-3263}, doi = {10.1021/jo061730d}, author = {Chavan, Subhash P. and Thakkar, Mahesh and Jogdand, Ganesh F. and Kalkote, Uttam R.} } @article { ISI:000236648800046, title = {Formation of poly(o-anisidine) coatings on copper from aqueous salicylate solution}, journal = {Surface \& Coatings Technology}, volume = {200}, number = {18-19}, year = {2006}, month = {MAY}, pages = {5557-5565}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Poly(o-anisidine) coatings have been electrosynthesized by using cyclic voltammetry on copper from an aqueous salicylate medium. Cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray photoelectron spectroscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-anisidine on copper substrate. Cyclic voltammetry accompanied by the X-ray photoelectron spectroscopy was used to characterize the surface modifications induced by polarizing the copper substrate in the aqueous salicylate solution (without monomer). It was shown that the polarization of the copper in the aqueous salicylate medium results into the passivation of its surface via the formation of Cu(2)O and/or copper salicylate complex. It was found that the electrochemical polymerization of o-anisidine takes place after the passivation of the copper substrate via fort-nation of Cu(2)O and/or copper salicylate complex and results into the formation of shiny, uniform and strongly adherent poly(o-anisidine). The optical absorption spectroscopy reveals the formation of emraldine salt form of poly(o-anisidine). This study offers an electrochemical polymerization recipe to synthesize strongly adherent poly(o-anisidine) coating on copper from aqueous media for possible use in corrosion protection application. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {conducting polymers, Copper, corrosion protective coatings, cyclic voltammetry, poly(o-anisidine) coatings}, issn = {0257-8972}, doi = {10.1016/j.surfcoat.2005.07.071}, author = {Chaudhari, Sudeshna and Mandale, A. B. and Patil, K. R. and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000242873400011, title = {General strategy for a short and efficient synthesis of 3-hydroxy-4-methylprolines (HMP)}, journal = {Tetrahedron Letters}, volume = {47}, number = {52}, year = {2006}, month = {DEC}, pages = {9215-9219}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The non-proteinogenic amino acid 3-hydroxy-4-methylproline (HMP) is an active constituent of some potent antimicrobials including echinocandins, nostopeptins, pneumocandins, sporiofungin and mulundocandins. A synthesis has been achieved in 10 steps with 29\% overall yield; the Evans{\textquoteright} aldol reaction using Crimmins{\textquoteright} modified method was pivotal to the success of the strategy. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {3, 4-disubstituted proline, Crimmins{\textquoteright} aldol reaction, Garner{\textquoteright}s aldehyde, non-proteinogenic amino acids, RUO4 mediated oxidation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.10.137}, author = {Mohapatra, Debendra K. and Mondal, Dhananjoy and Chorghade, Mukund S. and Gurjar, Mukund K.} } @article { ISI:000239664900018, title = {Hydroformylation of olefins using dispersed molecular catalysts on solid supports}, journal = {Catalysis Letters}, volume = {110}, number = {1-2}, year = {2006}, month = {AUG}, pages = {129-133}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

A new method for heterogenization of metal complex catalysts by precipitation of its water-soluble analogue as a Gr.2 metals (Ca, Sr or Ba) salt on porous supports has been proposed. This technique yields a highly dispersed catalyst having a significantly higher activity (TOF) for hydroformylation of olefins compared to other known heterogenized catalysts. The catalyst can be recycled with ease.

}, keywords = {carbon support, Heterogenization, Hydroformylation, Olefins, Rhodium}, issn = {1011-372X}, doi = {10.1007/s10562-006-0095-x}, author = {Pagar, N. S. and Deshpande, R. M. and Chaudhari, Raghunath V.} } @article { ISI:000237850400006, title = {Isolation of new straight chain compounds from acacia nilotica}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry including Medicinal Chemistry}, volume = {45}, number = {5}, year = {2006}, month = {MAY}, pages = {1231-1233}, publisher = {NATL INST SCIENCE COMMUNICATION}, type = {Article}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

A novel diester, pentacosane dioic acid dihexadecyl ester 1 has been isolated for the first time from n-hexane soxhlet extract of Acacia nilotica. Saponification of the diester reveals the presence of an alcohol, hexadecanol and pentacosane dioic acid. The structures of both the compounds are confirmed by GCMS analysis. Saponification of pet-ether extract of Acacia nilotica has been carried out. Unsaponiflable matter is further purified by column chromatography followed by repeated mixed solvent crystallization to afford heptacosan-1,2,3-triol 2.

}, keywords = {Acacia nilotica, diester, pentacosane dioic acid, saponification}, issn = {0376-4699}, author = {Chaubal, Rohini and Tambe, Amruta and Biswas, Sujata and Rojatkar, Supada and Deshpande, Vishnu and Deshpande, Nirinala} } @article {Rai, title = {Liquid phase oxidation of alkanes using Cu/Co-perchlorophthalocyanine immobilized MCM-41 under mild reaction conditions}, journal = {Applied Catalysis A-General}, volume = {297}, number = {2}, year = {2006}, month = {JAN}, pages = {220-230}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

{Amino-functionalized MCM-41 (NH2-MCM-41) was used to immobilize CU/CO-Cl16PC complex, i.e. Cu/Co-AM(PS) for liquid phase oxidation of alkanes under mild reaction conditions. Higher rates of reaction and better catalytic activity values were obtained for Cu/Co-AM(PS) as compared to Cu/Co-Cl16PC grafted on (i) amino-functionalized SiO2 [

}, keywords = {Ceramics, Electron microscopy, electronic materials, X-ray diffraction}, issn = {0272-8842}, doi = {10.1016/j.apcata.2005.09.012}, author = {Karandikar, Prashant R. and Chandwadkar, Asha J. and Agashe, M. and Ramgir, N. S. and Sivasanker, S.} } @article { ISI:000239295800003, title = {Methane reforming over a high temperature stable-NiCoMgOx supported on zirconia-hafnia catalyst}, journal = {Chemical Engineering Journal}, volume = {121}, number = {2-3}, year = {2006}, month = {AUG}, pages = {73-77}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The unusually high temperature stable NiCoMgOx (Ni/Co/Mg: 1:0.2:1.2)/zirconia-hafnia catalyst has been investigated for syngas generation via the catalytic partial oxidation of methane (CPOM), oxidative steam reforming of methane (OSRM) and oxidative CO2 reforming of methane (OCRM) processes. The catalyst, even when calcined at 1400 degrees C for 4 h, showed excellent activity/selectivity for the CPOM, OSRM and the OCRM reactions. On account of its high thermal stability, hot spots in the catalyst bed and/or high temperatures prevailing at the catalyst surface during the oxy-reforming processes would have little or no effect on the catalytic activity/selectivity of the NiCoMgOx/zirconia-hafnia catalyst, thus making the catalyst suitable even for operating under adiabatic conditions. While the selectivity for CO increased considerably with increasing reaction temperature for the CPOM process, the selectivity for H-2 was affected to a much lesser extent. The selectivity for CO and H-2 in the CPOM reaction was found to decrease with increasing space velocity; the H-2 selectivity was however affected to a greater extent. For the OSRM process, the H2O/CH4 ratio profoundly influenced the H-2/CO ratio and the heat of the reaction. Depending on the H2O/CH4 ratio, the OSRM process could be operated in a mildly exothermic, thermoneutral or mildly endothermic mode. The CO2 conversion increased rapidly with increasing OCRM temperature and correspondingly the exothermicity of the OCRM reaction was found to decrease with increasing reaction temperature. At 900 degrees C, the OCRM reaction was mildly exothermic and provided high methane conversion and syngas selectivity. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {high temperature stable catalyst, methane, oxy-dry reforming, oxy-steam reforming, Partial oxidation}, issn = {1385-8947}, doi = {10.1016/j.cej.2006.05.007}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000239573100068, title = {Minimum magnetizability principle}, journal = {Journal of Chemical Physics}, volume = {125}, number = {5}, year = {2006}, month = {AUG }, pages = {Article No. 056101}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, issn = {0021-9606}, doi = {10.1063/1.2227381}, author = {Tanwar, Akhilesh and Pal, Sourav and Roy, Debesh Ranjan and Chattaraj, Pratim Kumar} } @article { ISI:000238162900006, title = {Non-catalytic pyrolysis of ethane to ethylene in the presence of CO2 with or without limited O-2}, journal = {Journal of Chemical Science}, volume = {118}, number = {3}, year = {2006}, month = {MAY}, pages = {261-267}, publisher = {INDIAN ACADEMY SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Influence of the presence Of CO2, which is a mild oxidant, on the performance of the thermal cracking of ethane to ethylene in the absence or presence of limited O-2 at different temperatures (750-900 degrees C), space velocities (1500-9000 h(-1)) and CO2/C2H6 and O-2/C2H6 mole ratios (0-2.0 and 0-0.3 respectively) has been investigated. In both the presence and absence of limited 02, ethane conversion increases markedly because of the presence Of CO2, indicating its beneficial effect on the ethane to ethylene cracking. The increased ethane conversion is, however, not due to the oxidation of ethane to ethylene by CO2; the formation of carbon monoxide in the presence Of CO2 is found to be very small. It is most probably due to the activation of ethane in the presence Of CO2.

}, keywords = {ethane, ethane cracking in presence Of CO2, ethane cracking in presence of CO2 and limited O-2, Ethylene, thermal cracking of ethane}, issn = {0253-4134}, doi = {10.1007/BF02708286}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Mulla, Shafeek Abdul Rashid} } @article { ISI:000241849900010, title = {Novel chemical synthetic route and characterization of zinc selenide thin films}, journal = {Journal of Physics and Chemistry of Solid}, volume = {67}, number = {11}, year = {2006}, month = {NOV}, pages = {2310-2315}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Zinc selenide (ZnSe) thin film have been deposited using chemical bath method on non-conducting glass substrate in a tartarate bath containing zinc sulfate, ammonia, hydrazine hydrate, sodium selenosulfate in an aqueous alkaline medium at 333 K. The deposition parameter of the ZnSe thin film is interpreted in the present investigation. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), optical absorption, electrical measurements, atomic absorption spectroscopy (AAS). The ZnSe thin layers grown with polycrystalline zinc blende system along with some amorphous phase present in ZnSe film. The direct optical band gap {\textquoteleft}E-g{\textquoteright} for the film was found to be 2.81 eV and electrical conductivity in the order of 10(-8)(Omega cm)(-1) with n-type conduction mechanism. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {chalcogenides, electronic materials}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2006.05.001}, author = {Hankare, P. P. and Chate, P. A. and Delekar, S. D. and Asabe, M. R. and Mulla, Imtiaz S.} } @article { ISI:000239869200010, title = {Organosilanesulfonic acid-functionalized Zr-TMS catalysts: synthesis, characterization and catalytic applications in condensation reactions}, journal = {Applied Catalysis A-General}, volume = {310}, year = {2006}, month = {AUG}, pages = {79-90}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Organosilanesulfonic acid (-Si-R3S-R4SO3H, OSA)-functionalized mesoporous Zr-TMS (Zr-TMS-Si-R3S-R4SO3H, Zr-TMS-OSA) was synthesized either by post-synthetic modification of Zr-TMS (zirconia-based transition metal oxide mesoporous molecular sieves) with 3-mercaptopropyltrimethoxysilane (3-MPTS) and further with 1,4-butanesultone (1,4-BS) or by in situ one-pot synthesis procedure. A number of physico-chemical characterization techniques have been used to show that the organosilanesulfonic acid groups were anchored on to the walls of Zr-TMS. MCM-41-Si-R3S-R4SO3H-20 (MCM-41-OSA-20) was also prepared by post-synthesis procedure for comparison. Physico-chemical properties of in situ made A-Zr-OSA-20, Zr-TMS-SO3H-20 and MCM-41-OSA-20 were compared with Zr-TMS-OSA catalysts. The catalytic activity of the materials was tested in liquid phase condensation of aniline with p-formaldehyde to 4,4{\textquoteright}-diaminodiphenylmethane (4,4{\textquoteright}-DADPM). Results showed that Zr-TMS-OSA catalysts were more active than Zr-TMS-SO3H-20, MCM-41-OSA-20 and A-Zr-OSA-20 and more selective than Zr-TMS-SO3H-20 and A-Zr-OSA-20 catalysts. (C) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Acid catalyst, condensation of aniline, mesoporous ZrO2, organic functionalization, organosilanesulfonic acid}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.05.024}, author = {Chidambaram, M. and Venkatesan, C. and Singh, A. P.} } @article { ISI:000240352900023, title = {Ossification: a new approach to immobilize metal complex catalysts - applications to carbonylation and Suzuki coupling reactions}, journal = {Journal of Catalysis}, volume = {242}, number = {1}, year = {2006}, month = {AUG}, pages = {231-238}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

A simple approach for immobilization of transition metal complexes is reported here based on the transformation of the complex into its intrinsically insoluble counterpart, thus generating solid molecular catalysts. This approach that we call {\textquoteleft}{\textquoteleft}ossification{\textquoteright}{\textquoteright} is based on a principle, in which the water-soluble analogues of the metal complexes are precipitated out from aqueous solutions as insoluble ionic ensembles having catalytically active metal-centered coordination environments and robust framework. The approach has been illustrated for I{\textquoteright}d complex catalyzed carbonylation and Suzuki coupling reactions. {\textquoteleft}{\textquoteleft}Ossification{\textquoteright}{\textquoteright} was found to be an economically and environmentally attractive alternative to other exotic immobilization methodologies. (c) 2006 Elsevier Inc. All rights reserved.

}, keywords = {Carbonylation, Heterogeneous catalysts, Immobilization, ossification, Palladium complex, Suzuki coupling}, issn = {0021-9517}, doi = {10.1016/j.jcat.2006.05.032}, author = {Sarkar, Bibhas R. and Chaudhari, Raghunath V.} } @article { ISI:000240615500001, title = {Oxy-CO2 reforming of methane to syngas over CoOx/CeO2/SA-5205 catalyst}, journal = {Energy \& Fuel}, volume = {20}, number = {5}, year = {2006}, month = {SEP}, pages = {1753-1756}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The oxy-CO2 methane reforming (OCRM) process has been investigated over the CoOx/CeO2/SA-5205 catalyst at varying reaction temperatures (750-900 degrees C), O-2/CH4 ratios (0.3- 0.45), and space velocities (20 000 - 100 000 cm(3)/g/h). With an increasing OCRM reaction temperature, the contribution from the CO2 methane reforming reaction increased while that from methane combustion reactions decreased. Correspondingly, there was an increase in the H-2/CO ratio and a sharp decrease in reaction exothermicity. At 900 C (gas hourly space velocity = 46 000 cm(3)/g/h and O-2/CH4 = 0.4), the OCRM reaction over the CoOx/CeO2/SA-5205 catalyst was mildly endothermic with \> 90\% CH4 conversion, \> 95\% H-2 selectivity, and a H-2/CO ratio of 1.63. CH4 conversion was relatively unaffected by the O-2/CH4 ratio used in the OCRM reaction; however, CO2 conversion decreased on increasing the O-2/CH4 ratio. While H-2 selectivity was not significantly affected by the O-2/CH4 ratio, the H-2/CO ratio increased linearly with an increasing O-2/CH4 ratio. The endothermicity of the reaction was found to decrease with an increasing CH4/O-2 ratio, which can be explained on the basis of increased contribution from the methane partial oxidation reaction with an increasing O-2/CH4 ratio.

}, issn = {0887-0624}, doi = {10.1021/ef060138o}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000241929400015, title = {Oxy-CO2 reforming of methane to syngas over CoOx/MgO/SA-5205 catalyst}, journal = {Fuel}, volume = {85}, number = {17-18}, year = {2006}, month = {DEC}, pages = {2484-2488}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The OXY-CO2 methane reforming reaction (OCRM) has been investigated over CoOx supported on a MgO precoated highly macroporous silica-alumina catalyst carrier (SA-5205) at different reaction temperatures (700-900 degrees C), O-2/CH4 ratios (0.3-0.45) and space velocites (20,000-100,000cc/g/h). The reaction temperature had a profound influence on the OCRM performance over the CoO/MgO/SA-5205 catalyst; the methane conversion, CO2 conversion and H-2 selectivity increased while the H-2/CO ratio decreased markedly with increasing reaction temperature. While the O-2/CH4 ratio did not strongly affect the CH4 and CO2 conversion and H-2 selectivity, it had an intense influence on the H-2/CO ratio. The CH4 and CO2 conversion and the H-2 selectivity decreased while the H-2/CO increased with increasing space velocity. The O-2/CH4 ratio and the reaction temperature could be used to manipulate the heat of the reaction for the OCRM process. Depending on the O-2/CH4 ratio and temperature the OCRM process could be operated in a mildly exothermic, thermal neutral or mildly endothermic mode. The OCRM reaction became almost thermoneutral at an OCRM reaction temperature of 850 degrees C, O-2/CH4 ratio of 0.45 and space velocity of 46,000 cc/g/h. The CH4 conversion and H-2 selectivity over the CoO/MgO/SA-5205 catalyst corresponding to thermoneutral conditions were excellent: 95\% and 97\%, respectively with a H-2/CO ratio of 1.8. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {methane, oxy-CO2 reforming, Syngas}, issn = {0016-2361}, doi = {10.1016/j.fuel.2006.04.013}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000238056800007, title = {Partial oxidation of methane to syngas with or without simultaneous steam or CO2 reforming over a high-temperature stable-NiCoMgCeOx supported on zirconia-hafnia catalyst}, journal = {Applied Catalysis A-General}, volume = {306}, year = {2006}, month = {JUN}, pages = {45-50}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A NiCoMgCeOx (Ni/Co/Mg/Ce: 1:0.2:1.2:1.2)/zirconia-hafnia catalyst with unusually high thermal stability has been investigated for syngas generation via a process that includes the catalytic partial oxidation of methane (CPOM), the oxidative steam reforming of methane (OSRM) and the oxidative CO2 reforming of methane (OCRM). The catalyst calcined at 1400 degrees C (for 4 h) showed excellent activity/selectivity for the CPOM, OSRM and the OCRM reactions; furthermore no catalyst deactivation was observed for a period of 20 h. For the CPOM process, the selectivity for H-2 was \> 95\% at reaction temperatures \> 650 degrees C however temperatures above 800 degrees C were required to achieve \> 95\% CO selectivity. While the reaction temperature had a considerable influence on the CPOM product H-2/CO ratio, the space velocity (at 850 degrees C) did not affect it to any significant extent. For the OSRM process, the H2O/CH4 ratio and the reaction temperature had a strong effect on the product H-2/CO ratio and the heat of the reaction; depending on the H2O/CH4 ratio and reaction temperature, the OSRM process could be operated in a mildly exothermic, thermoneutral or mildly endothermic mode. The CO2 conversion was very strongly affected by the reaction temperature in the OCRM process; reasonably high CO2 conversion ( \> 40\%) could only be obtained at high OCRM reaction temperatures ( \> 850 degrees C). The exothermicity of the OCRM reaction was found to decrease with increasing reaction temperature. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {dry (CO2) reforming, high-temperature stable, methane, oxy-steam reforming, Partial oxidation, Steam reforming, Syngas}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.03.032}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000241849900014, title = {Photoelectrochemical properties of electrochemically deposited CdIn2S4 thin films}, journal = {Journal of Physics and Chemistry of Solids}, volume = {67}, number = {11}, year = {2006}, month = {NOV}, pages = {2331-2336}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Thin films of CdIn2S4 have been deposited on to stainless steel and fluorine-doped tin oxide (FTO)-coated glass substrates from aqueous acidic bath using an electrodeposition technique. Ethylene diamine tetra-acetic acid (EDTA) disodium salt is used as complexing agent to obtain good-quality deposits by controlling the rate of the reaction. The different preparative parameters like concentration of bath, deposition time, bath temperature, pH of the bath have been optimized by the photoelectrochemical (PEC) technique in order to get good-quality photosensitive material. Different techniques have been used to characterize CdIn2S4 thin films. Optical absorption shows the presence of direct transition with band gap energy 2.17 eV. The X-ray diffraction (XRD) analysis of the as-deposited and annealed films showed the presence of polycrystalline nature. Energy-dispersive analysis by X-ray (EDAX) study for the sample deposited at optimized preparative parameters shows that the In-to-Cd ratio is almost 2 and S-to-Cd ratio is almost 4. Scanning electron microscopy (SEM) for samples deposited at optimized preparative parameters reveals that spherical grains are uniformly distributed over the surface of the substrate indicates the well-defined growth of polycrystalline CdIn2S4 thin film. PEC characterization of the films is carried out by studying photoresponse, spectral response and photovoltaic output characteristics. The fill factor (ff) and power conversion efficiency (eta) of the cell are 69 and 2.94\%, respectively. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Thin films, X-ray diffraction}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2006.05.022}, author = {Kokate, A. V. and Asabe, M. R. and Delekar, S. D. and Gavali, L. V. and Mulla, Imtiaz S. and Hankare, P. P. and Chougule, B. K.} } @conference {42804, title = {Poly(High Internal Phase Emulsion) of 2-EHA, 2-EHMA and EGDA with naturally occurring phenolic compounds", paper presented at international conference on ?polymers for advanced technology}, booktitle = {Polymers for Advanced Technology}, year = {2006}, month = {DEC}, address = {National Chemical Laboratory, Pune}, author = {Ingavle, Ganesh C. and Shaikh, A. A. and Bhongale, Sunil Sitaram and Scaria, S. and Chavan, Nayaku and Qureshi, Mohammed and Ponrathnam, Surendra} } @article { ISI:000237576500008, title = {Propane conversion to aromatics on highly active H-GaAlMFI: effect of thermal pretreatment}, journal = {Energy \& Fuel}, volume = {20}, number = {3}, year = {2006}, month = {MAY}, pages = {919-922}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The propane aromatization activity over H-GaAlMFI has been investigated after different thermal pretreatments ( calcination temperature range: 500- 800 degrees C) at a reaction temperature of 500 degrees C and in the space velocity range of 1500-12000 cm(3)/g/h. The calcination temperature had a strong influence on the strong acidity of the zeolite, propane conversion, and aromatic distribution. The decrease in acidity with increased thermal treatment severity correlated well with the decrease in the framework Ga. There was a considerable decrease in propane aromatization activity at calcination temperatures above 600 degrees C. The effect of calcination temperature on the propane aromatization activity can be explained in terms of change in the strong acidity of the zeolite and the extraframework Ga content. The selectivity for aromatics was found to decrease with increasing thermal pretreatment severity, while that for methane, ethane, and propylene was found to increase. The aromatic distribution was also influenced by the thermal pretreatment; the selectivity for benzene increased with increasing pretreatment temperature, while the selectivity for toluene, C-8 aromatics, and C9+ aromatics decreased.

}, issn = {0887-0624}, doi = {10.1021/ef050328j}, author = {Choudhary, Tushar V. and Kinage, A. and Banerjee, S. and Choudhary, Vasant R.} } @article { ISI:000238086600005, title = {Radiation assisted synthesis of nanosized barium zirconate}, journal = {Radiation Physics and Chemistry}, volume = {75}, number = {7}, year = {2006}, month = {JUL}, pages = {755-759}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This paper reports the synthesis of refractory barium zirconate using solid-state reactive precursors subjected to gamma-radiations of a Co-60 source. Influence of varying doses on the formation of cubic phase of BaZrO3 has been investigated with the stepwise analysis of the intermediate products by means of FT-IR, XRD and TGA techniques. TEM depicts the nanospherical nature of the BaZrO3 particles. (C) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Ceramics, gamma-radiation, Nanoparticles, perovskite, refractory, XRD}, issn = {0969-806X}, doi = {10.1016/j.radphyschem.2005.12.041}, author = {Athawale, Anjali A. and Chandwadkar, Asha J. and Karandikar, Prashant R. and Pasricha, R. and Bapat, Malini S.} } @article { ISI:000237600800007, title = {Rapid molecular identification of freshly squeezed and reconstituted orange juice}, journal = { International Journal of Food Science and Technology}, volume = {41}, number = {6}, year = {2006}, month = {JUN}, pages = {646-651}, publisher = {BLACKWELL PUBLISHING}, type = {Article}, address = {9600 GARSINGTON RD, OXFORD OX4 2DQ, OXON, ENGLAND}, abstract = {

This work presents a rapid and accurate molecular approach in the identification of freshly squeezed and reconstituted orange juice. Primers were designed based on the 18S and internal transcribed spacer (ITS) region. The findings indicated that self-made freshly squeezed orange juice heated to 80 degrees C for 30 s caused damage to DNA integrity, thus failing in amplification by primer 18S-ITSe, which gives a polymerase chain reaction product of 2081 bp, whereas primer 18S-ITSf, fragment length 2421 bp, could only be seen in heating conditions less stringent than 70 degrees C, 15 s. This new DNA integrity-dependent method has potential applications in identifying adulteration of freshly or processed orange juice.

}, keywords = {adulteration, citrus, DNA degradation, molecular detection, reconstituted juice}, issn = {0950-5423}, doi = {10.1111/j.1365-2621.2006.01125.x}, author = {Ng, C. C. and Chang, C. C. and Wu, I. C. and Kotwal, S. and Shyu, Y. T.} } @article {Datar, title = {Remarkably rapid regioselective synthesis of beta-enaminones using silica chloride in a heterogeneous as well as an ionic liquid in a homogeneous medium at room temperature}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {245}, number = {1-2}, year = {2006}, note = {6th International Conference on Solvothermal Reactions, Mysore, INDIA, AUG 24-27, 2004}, month = {FEB}, pages = {37-46}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

{Silica chloride as a heterogeneous catalyst has been used for the regioselective synthesis of P-amino-a,P unsaturated esters and ketones. Similar regioselective synthesis was also performed using an ionic liquid 1-n-butyl imidazolium tetrafluoroborate [

}, keywords = {direct oxidation of H-2 to H2O2, H2O2 decomposition, H2O2 hydrogenation, Promoting action of chloride or bromide anions, supported Pd catalysts}, issn = {0021-9517}, doi = {10.1016/j.molcata.2005.09.021}, author = {Gholap, Atul R. and Chakor, N. S. and Daniel, Thomas and Lahoti, Rajgopal J. and Srinivasan, K. V.} } @article { ISI:000242873400029, title = {Ring closing metathesis approach to the indole alkaloid mitralactonine}, journal = {Tetrahedron Letters}, volume = {47}, number = {52}, year = {2006}, month = {DEC}, pages = {9301-9303}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient utilisation of RCM leading to a convenient synthesis of a pentacyclic indole alkaloid is described. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {corynanthe type alkaloid, Dihydroxylation, mitralactonine, RCM, Swern oxidation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.10.106}, author = {Chavan, Subhash P. and Sharma, Pallavi and Sivappa, R. and Kalkote, Uttam R.} } @article { ISI:000241591900007, title = {Selective ortho-methylation of phenol with methanol over copper manganese mixed-oxide spinel catalysts}, journal = {Journal of Catalysis}, volume = {243}, number = {2}, year = {2006}, month = {OCT}, pages = {278-291}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Methylation of phenol with methanol as an alkylating agent to produce 2,6-xylenol was investigated over copper manganese mixed oxide spinels, CuxMn3-xO4 (x = 0, 0.25, 0.5, 0.75, and 1) prepared through co-precipitation. The catalytic activity strongly depends on the composition, acid-base properties, and structural stability. Various parameters, including catalyst composition, reaction temperature, feed composition, and durability of the catalyst during methylation, were investigated. Mainly o-cresol and 2,6-xylenol, along with small amounts of mesitol, were found in the product. A high ortho-selectivity of 100\%, with 2,6-xylenol selectivity of 74\%, was observed over Cu0.25Mn2.75O4 at 673 K. These catalysts were investigated using various techniques, including BET surface area, XRD, DRS UV-vis, TPD of NH3 and CO2, TPR, and X-ray photoemission spectroscopy (XPS). Powder XRD of the catalysts revealed the formation of copper-manganese spinels with hausmannite (Mn3O4) tetragonal structure, for x = 0-0.5, whereas an increase in copper content (x \> 0.5) led to the formation of cubic Cu1.5Mn1.5O4 phase. DRS UV-vis, and FTIR further supported the changes in structural phases observed by XRD. Temperature-programmed desorption Of CO2 and NH3 showed that the catalysts have strong basicity along with weak acidity when x = 0 and 0.25. XPS and XAES analysis revealed the presence of only Cu2+ ions in fresh sample with x = 0.25, whereas for x = 1.0, both Cu1+ and Cu2+ were observed. The deactivation of the catalysts is attributed to structural changes occurring during the reaction. Catalytic activity is correlated with structure, as well as with acid-base properties. (c) 2006 Elsevier Inc. All rights reserved.

}, keywords = {2, 6-xylenol, acidity-basicity, copper-manganese oxides, ortho-alkylation, phenol methylation, Spinels}, issn = {0021-9517}, doi = {10.1016/j.jcat.2006.07.014}, author = {Reddy, A. Satyanarayana and Gopinath, Chinnakonda S. and Chilukuri, Satyanarayana V.} } @article { ISI:000242524100005, title = {Stereoselective synthesis of the polyketide chain of nagahamide A}, journal = {Tetrahedron-Asymmetry}, volume = {17}, number = {18}, year = {2006}, month = {OCT}, pages = {2609-2616}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A carbohydrate based approach for the enantioselective synthesis of the polyketide acid unit present in nagahamide A has been reported. Reductive ring opening of a chiral cyclopropane ketone group to enantioselectively install the methyl and propyl groups, is a salient feature of this synthesis. (c) 2006 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2006.09.025}, author = {Mohapatra, Debendra K. and Chaudhuri, Siddhartha Ray and Sahoo, Gokarneswar and Gurjar, Mukund K.} } @article { ISI:000242468700074, title = {Synthesis and characterization of cholesteric thermotropic liquid crystalline polyesters}, journal = {Journal of Applied Polymer Science}, volume = {103}, number = {2}, year = {2006}, month = {JAN}, pages = {1232-1237}, publisher = {WILEY-BLACKWELL}, type = {Article}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Cholesteric liquid crystalline polyesters were successfully synthesized from isosorbide, methyl hydroquinone, and isophthaloyl chloride. Homo/copolyesters were synthesized by the solution polycondensation method, for which a mild organic base such as pyridine was employed. Inherent viscosities of polyesters P-3-P-5 were in the range of 0.31-0.39 dL/g at 25 degrees C in chloroform, and polyesters P-1 and P-2 were insoluble in chloroform. Homo/copolyesters based on isosorbide, methyl hydroquinone, and isophthalic acid had thermal stability at more than 300 degrees C on the basis of 10\% weight loss. The thermotropic liquid crystalline properties were examined by differential scanning calorimetry and polarizing optical microscopy. Wide-angle X-ray diffraction study demonstrated that polyesters P-1, P-2, and P-3 were semicrystalline, whereas the degree of crystallinity of polyesters P-4 and P-5 was less than 5\%. Copolyester P-4 showed formation of a yellow iridescent streak at 209 degrees C on heating and development of a Grand-jean texture at 270 degrees C on heating. These are typical textures of the cholesteric liquid crystalline phase. (c) 2006 Wiley Periodicals, Inc.

}, keywords = {cholesteric liquid crystalline polymers (ChLCP), Differential scanning calorimetry (DSC), optical microscopy, solution polycondensation, Thermogravimetric analysis (TGA), viscosity}, issn = {0021-8995}, doi = {10.1002/app.24610}, author = {Jadhav, Sushilkumar A. and Chougule, Rahul R. and Shinde, Yogesh A. and Chavan, Nayaku} } @article { ISI:000239340200010, title = {Synthesis, characterization and optical properties of silver and gold nanowires embedded in mesoporous MCM-41}, journal = {Central European Journal of Chemistry}, volume = {4}, number = {2}, year = {2006}, month = {JUN}, pages = {317-328}, publisher = {SPRINGER HEIDELBERG}, type = {Article}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

Uniform nanowires of silver and gold inside the channels of MCM-41 were prepared by controlled reduction of their respective metal salts with sodium borohydride (NaBH4). Presence of nanowires of silver and gold in MCM-41 were confirmed by high angle X-ray diffraction (XRD) data (peaks between 2 theta = 30 - 60 degrees) and transmission electron microscopy (TEM) confirmed the diameter of the nanowires. Diameter of nanowires is found to be similar to 2.8 nm which is coincident with channel diameter of MCM-41. Optical properties of these heterostructured materials Ag-MCM-41 and Au-MCM-41 reveals the presence of surface plasmon absorption peaks of silver and gold respectively, and the shift in the absorption bands are associated to agglomeration of clusters inside the channels. Room temperature photoluminescence spectra exhibits interesting optical properties as observed for direct band gap semiconductors. Non-linear optical properties (NLO) corresponding to second harmonic generation (SHG) values were also recorded for self supported films of these heterostructured materials. Enhanced optical non-linearity was found to be arising from a corresponding increase of local field near the surface plasmon resonance. Further enhancement in SHG was found with poling due to an induction of orientation order. (C) Versita Warsaw and Springer-Verlag Berlin Heidelberg. All rights reserved.

}, keywords = {Ag/Au nanowires, MCM-41, photoluminescence, SHG, TEM}, issn = {1895-1066}, doi = {10.2478/s11532-006-0006-4}, author = {Adhyapak, Parag V. and Karandikar, Prashant R. and Dadge, Jagdish W. and Aiyer, Rohini C. and Chandwadkar, Asha J.} } @article { ISI:000238050700006, title = {Synthesis of beta-Ag2Se from organo-selenium precursor and silver nitrate in DMF via simultaneous reduction of selenium and silver salt}, journal = {Materials Letters}, volume = {60}, number = {17-18}, year = {2006}, month = {AUG}, pages = {2080-2085}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction of selenium powder and silver nitrate in aqueous N,N{\textquoteright}-dimethylformamide (aq. DMF) leads to formation of silver selenide. Similar reaction with cycloalkeno-1,2,3-selenadiazole an organic compound of selenium upon thermolysis, also produces silver selenide. It is believed that DMF activates selenium and reduces silver salt via in-situ generated hydrogen ion simultaneously. Slightly broadened X-ray diffraction pattern for pure beta silver selenide (beta-Ag2Se) was observed. Scanning electron microscopy (SEM) indicated that the agglomerated particles could be in the range of about 100 to 200 nm in dimension. EDAX analysis showed non-stoichiometric elemental ratio between silver and selenium. It is found that the weight percent of Ag is slightly higher than Se. However, free amorphous selenium is also detected by XPS analysis when the product is made by use of elemental selenium. Thermal analysis (TGA) revealed a small (4\%) weight loss due to the presence of organics or the solvent from the reaction medium. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, nano powder, noble metal chalcogenides, Semiconductor}, issn = {0167-577X}, doi = {10.1016/j.matlet.2005.12.079}, author = {Khanna, P. K. and Singh, N. and Charan, Shobhit and Patil, K. R.} } @article { ISI:000238142900019, title = {Synthesis of beta-amino alcohols from aromatic amines and alkylene carbonates using Na-Y zeolite catalyst}, journal = {Synlett}, number = {9}, year = {2006}, month = {JUN}, pages = {1374-1378}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A simple, efficient, and environmentally benign methodology for the synthesis of beta-amino alcohols from aromatic amines and alkylene carbonates in the presence of the highly active and reusable solid base catalyst Na-Y zeolite is demonstrated.

}, keywords = {Alkylation, alkylene carbonate, Amine, Amino alcohols, zeolite}, issn = {0936-5214}, doi = {10.1055/s-2006-939697}, author = {Shivarkar, Anandkumar B. and Gupte, Sunil P. and Chaudhari, Raghunath V.} } @article { ISI:000242958500011, title = {Synthesis of cadmium selenide thin films at low-temperature by simple chemical route and their characterization}, journal = {Journal of Physics and Chemistry of Solids}, volume = {67}, number = {12}, year = {2006}, month = {DEC}, pages = {2506-2511}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Crystalline CdSe thin film has been deposited using appropriate precursor solution containing cadmium sulfate octahydrate, tartaric acid, potassium hydroxide, ammonia and sodium selenosulfate. The effect of parameters such as bath composition, deposition temperature, pH of the solution, speed of the rotation and the specificity of complexing agent on growth process is studied. The {\textquoteleft}as-deposited{\textquoteright} CdSe thin film was found to be red in color, specularly reflective and well adherent to the glass substrate. The crystalline phase of the deposited sample was hexagonal wurtzite-type. The analysis of optical absorption data shows energy band gap energy (E-g) 2.01 eV. The morphological study and compositional analysis of film sample have been discussed. The electrical resistivity of CdSe thin film was found to the order of 10(6) Omega cm. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {XRD}, issn = {0022-3697}, doi = {10.1016/j.jpes.2006.07.006}, author = {Hankare, P. P. and Delekar, S. D. and Asabe, M. R. and Chate, P. A. and Bhuse, V. M. and Khomane, A. S. and Garadkar, K. M. and Sarwade, B. D.} } @article { ISI:000239885000005, title = {Synthesis of the spiro fused beta-lactone-gamma-lactam segment of oxazolomycin}, journal = {Tetrahedron Letters}, volume = {47}, number = {34}, year = {2006}, month = {AUG}, pages = {6031-6035}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An effective synthetic strategy for construction of the novel spiro-bicyclic beta-lactone-gamma-lactam system present in oxazolomycin has been demonstrated. The 3,4-disubstituted pyrrolidine ring system was constructed via an Evans aldol reaction. The spiro-beta-lactone ring was elaborated from a gem-hydroxymethyl moiety that was successfully installed by an aldol followed by a crossed Cannizzaro reaction. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {crossed Cannizzaro reaction, Evans{\textquoteright} aldol reaction, Garner{\textquoteright}s aldehyde, intramolecular Mitsunobu reaction, ruthenium tetroxide oxidation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.06.117}, author = {Mohapatra, Debendra K. and Mondal, Dhananjoy and Gonnade, Rajesh G. and Chorghade, Mukund S. and Gurjar, Mukund K.} } @article { ISI:000239884300028, title = {Theoretical study of N2O reduction by CO in Fe-BEA zeolite}, journal = {Chemphyschem}, volume = {7}, number = {8}, year = {2006}, month = {AUG}, pages = {1795-1801}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Quantum mechanical (QM) and QM/molecular mechanics (MM) studies of the full catalytic cycle of N2O reduction by CO in Fe-BEA zeolite, that is, oxidation of BEA-Fe by NO and reduction of BEA-Fe-alpha O by CO, is presented. A large QM cluster, representing half of the channel of the BEA zeolite, is used. The contribution of the MM embedding to the calculated activation energies is found to be negligible. The minimum-energy paths for N2O decomposition and reduction with CO are calculated using the nudged elastic bond (NEB) method. Calculated band experimental activation energies ore in good agreement The two possible orientations for the gaseous molecules adsorbing on the Fe site that ore found lead to different activation energies.

}, keywords = {Density functional calculations, iron, nitrogen oxides, reaction mechanisms, zeolites}, issn = {1439-4235}, doi = {10.1002/cphc.200600228}, author = {Fischer, Gerd and Goursot, Annick and Coq, Bernard and Delahay, Gerard and Pal, Sourav} } @article { ISI:000242469000012, title = {Unusual formation of nano-particles of CdO and Cd(OH)(2) from the reaction of dimethyl cadmium with DMF}, journal = {Materials Letters}, volume = {60}, number = {29-30}, year = {2006}, month = {DEC}, pages = {3492-3498}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This paper presents generation of CdO and Cd(OH)(2) nano-particles from Dimethyl Cadmium in DMF. The CdO nano-particles were obtained instead of CdSe, even when the reaction was done in presence of 1,2,3-selenadiazole (the source of selenium) with Me2Cd in DMF (product-I). The direct reaction of Me2Cd in DMF also leads to formation of CdO (product-II). However, Cd(OH)(2) nano-particles were obtained when Me2Cd was refluxed in DMF for a few hours followed by reaction of H2S gas (product-III). The formation of Cd(OH)(2) was also established via decomposition Of Me2Cd:Et2O adduct (product-IV). Nano-particles of CdO and Cd(OH)(2) (product-I to product-IV) were characterized by X-ray powder diffraction (XRD), TEM and SEM/EDS measurements, FTIR, thermal analysis (TGA) and XPS analysis. The particle size of all the products as calculated by XRD patterns were in the range of about 20 nm. TEM images showed that the products are agglomerated clusters with the particles in the nano-meter regime. The synthesis however, is understood to be unusual as the reactions with selenium source and sulfur source should have generated the CdSe and CdS however, the end products were always found to be the product-I to product-IV (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Nanoparticles, Semiconductor, XRD}, issn = {0167-577X}, doi = {10.1016/j.matlet.2006.03.054}, author = {Singh, Narendra and Charan, Shobhit and Patil, K. R. and Viswanath, A. K. and Khanna, P. K.} } @article { ISI:000241996500012, title = {Vapour phase methylation of phenol over nanocrystalline ZnFe(2-x)A1(x)O(4) (x=0, 0.25, 0.5, 0.75 and 1.0) ferrospinel system}, journal = {Indian Journal of Chemical Technology}, volume = {13}, number = {5}, year = {2006}, month = {SEP}, pages = {493-498}, publisher = {NATL INST SCIENCE COMMUNICATION}, type = {Article}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

The alkylation ofphenol with methanol was carried out over ZnFe2-xAlxO4 (x = 0, 0.25, 0.5, 0.75 and 1.0) type spinel systems in a Fixed bed, down flow reactor. The influence of Surface acidity, cation distribution in the spinel lattice and various reaction parameters are discussed. A maximum yield of 70.9 and 22.9\% with selectivity of 73.5 and 23.3\% was obtained for 2,6-xylenol and o-cresol respectively, giving a total ortho selectivity of: 96.8\% over ZnFeAlO4 at 350 degrees C, methanol to phenol molar ratio of 5 and WHSV of 0.6 h(-1). Catalyst characterization was made by XRD, Mossbauer spectroscopy, ammonia desorption and BET surface area measurements. Mossbauer spectroscopy reveals isomorphic substitution or Fe 3 by smaller A 13, into the octahedral sites leading to lattice distortion, Unsymmetrical charge distribution and charge transfer from iron to oxygen making it more basic and proton attracting. This helps vertical adsorption ofphenol and formation of 2.6-xylenol. It has been concluded that catalyst acidity plays major role in the reaction as compared to surface area.

}, keywords = {consecutive methylation, ferrospinels, vertical and horizontal adsorption}, issn = {0971-457X}, author = {Reddy, Vanga S. and RadheShyam, A. and Dwivedi, Reena and Rai, A. and Anilkumar, Mettu and Chumbhale, Vilas R. and Aswar, A. S. and Prasad, R.} } @article {42681, title = {Ab initio lifetimes in the interatomic coulombic decay of neon clusters computed with propagators}, journal = {Journal of Chemical Physics}, volume = {126}, year = {2007}, month = {APR}, pages = {Article No. 164110}, type = {Article}, doi = {10.1063/1.2723117}, author = {Vaval, Nayana and Cederbaum, Lorenz S.} } @article { ISI:000247759200023, title = {Adsorption of zinc from aqueous solution using chemically treated newspaper pulp}, journal = {Bioresource Technology }, volume = {98}, number = {16}, year = {2007}, month = {NOV}, pages = {3136-3141}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Adsorption of zinc was studied using chemically modified newspaper pull) as an adsorbent in the aqueous medium. Quantitative chemical analysis showed the presence of trace quantities of some inorganic elements along with phosphorous in TNP. The experimental adsorption data fitted reasonably well to both Freundlich and Langmuir isotherm. pHzpc of TNP was 5.1, which indicated that the adsorbent was more potential for cationic adsorption. The adsorption kinetic data followed a pseudo-second order model for zinc. Optimum Zn2+ loading was 9.20 mg/g for 10.31 mg/l initial zinc concentration at pH 5.80. Zn2+ loading on TNP was dependent on initial zinc concentration. TNP was a potential adsorbent for the removal of Zn from the effluent of electroplating industry. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Adsorption, newspaper pulp, TNP, zinc}, issn = {0960-8524}, doi = {10.1016/j.biortech.2006.10.040}, author = {Chakravarty, S. and Bhattacharjee, S. and Gupta, K. K. and Singh, M. and Chaturvedi, Hema T. and Maity, S.} } @article { ISI:000243725800029, title = {Anticorrosive properties of electrosynthesized poly(o-anisidine) coatings on copper from aqueous salicylate medium}, journal = {Journal of Physics D-Applied Physics}, volume = {40}, number = {2}, year = {2007}, month = {JAN}, pages = {520-533}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Poly( o-anisidine) ( POA) coatings were electrosynthesized on copper ( Cu) from an aqueous solution containing o-anisidine and sodium salicylate by using cyclic voltammetry, galvanostatic and potentiostatic modes. The extent of corrosion protection offered by these coatings to Cu in aqueous 3\% NaCl solution was evaluated by the open circuit potential measurements, potentiodynamic polarization technique and electrochemical impedance spectroscopy. Potentiodynamic polarization and electrochemical impedance spectroscopy studies reveal that the POA acts as a protective layer on Cu against corrosion in 3\% NaCl solution. The positive shift in the corrosion potential for the POA-coated Cu indicates the protection of the Cu surface by the POA. The POA coating synthesized by using cyclic voltammtery, galvanostatic and potentiostatic modes reduces the corrosion rate of Cu almost by a factor of 100, 100 and 7, respectively. The cyclic voltammetry was proved to be the better mode to adopt for the synthesis of more compact and strongly adherent POA coatings on Cu. The coatings synthesized by this mode were characterized by cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. It was found that the electrochemical polymerization of o-anisidine on Cu takes place after the passivation of its surface via the formation of Cu2O and/or copper salicylate complex and results in the generation of shiny, uniform and strongly adherent POA coatings. The optical absorption spectroscopy reveals the formation of the emeraldine salt form of POA. The results of this study clearly ascertain that the POA has outstanding potential to protect Cu against corrosion in a chloride environment.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/40/2/028}, author = {Chaudhari, Sudeshna and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000245961800008, title = {Benzylsulfonic acid functionalized mesoporous Zr-TMS catalysts: an efficient and recyclable catalyst for the preparation of coumarin derivatives by pechmann condensation reaction}, journal = {Catalysis Communications}, volume = {8}, number = {5}, year = {2007}, month = {MAY}, pages = {777-783}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Benzylsulfonic acid functionalized mesoporous Zr-TMS (Zr-TMS-BSA, Zr-TMS, zirconia based transition metal oxide mesoporous molecular sieves) catalyst is used as an alternative to conventional acid catalysts in the von Pechmann condensation of aromatic alcohols with ethyl acetoacetate leading to the formation of coumarin derivatives in solvent free condition at 150 degrees C. Three types of coumarins, 7-hydroxy-4-methylcoumarin (beta-methylumbelliferone), 7-methoxy-4-methylcoumarin (Methyl-4-methylumbelliferyl ether) and 7,8-benzo-4-methylcoumarin derivatives have been prepared using resorcinol, 3-methoxyphenol and 1-naphthol, respectively. The catalytic activity and the recycle studies of the catalyst in all the three reactions proved the superior performance of the catalyst. Further the products were confirmed by GC, elemental analysis, melting point and NMR techniques. Finally, the probable mechanism for Pechmarm condensation using Zr-TMS-BSA catalyst has been reported. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {benzylsulfonic acid, Pechmann condensation and coumarins, Zr-TMS-BSA catalysts}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.08.039}, author = {Selvakumar, S. and Chidambaram, M. and Singh, A. P.} } @article { ISI:000243163000025, title = {Bimetallic Pt-Sn/gamma-alumina catalyst for highly selective liquid phase hydrogenation of diethyl succinate to gamma-butyrolactone}, journal = {Catalysis Communications}, volume = {8}, number = {3}, year = {2007}, month = {MAR}, pages = {340-344}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Platinum-tin bimetallic catalyst on gamma-alumina support was prepared by impregnation method and was reduced by sodium borohydride at room temperature. XRD and XPS characterization revealed that platinum was reduced to Pt-0 while, tin was probably partially reduced to Sn2+ due to the low temperature reduction method and Sn-0 was completely absent, avoiding the formation of P-Sn alloy. Pt-Sn/gamma-alumina (Pt 1\%, Sn 9\%) thus prepared was found to give almost complete selectivity to gamma-butyrolactone in liquid phase hydrogenation of diethyl succinate. A plausible reaction pathway is proposed involving Pt-O-Sn state and high selectivity to GBL is due to the Lewis acidity of Sn2+/4+ (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {bimetallic Pt-Sn catalyst, gamma-butyrolactone selectivity, liquid phase hydrogenation of diethyl maleate, XPS of Pt-Sn, XRD of Pt-Sn}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.06.026}, author = {Vaidya, S. H. and Rode, C. V. and Chaudhari, Raghunath V.} } @article { ISI:000251244900035, title = {Biphasic hydroformylation of 1,4-diacetoxy-2-butene: a kinetic study}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {25}, year = {2007}, note = {Joint 6th International Symposium on Catalysis in Multiphase Reactors/5th International Symposium on Multifunctional Reactors (CAMURE-6/ISMR-5-), Pune, INDIA, JAN 14-17, 2007}, month = {DEC}, pages = {8629-8637}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydroformylation of 1,4-diacetoxy-2-butene was studied using a water-soluble Rh complex catalyst prepared in situ from [Rh(COD)Cl](2) complex and trisodium salt of tri-(m-sulfophenyl)phosphine (TPPTS) in a biphasic system. The sequence of addition of catalyst precursor, ligand, and reactant/solvent showed a significant effect on leaching of Rh from aqueous to organic phase, and hence, the procedure was optimized to develop a nonleaching and stable biphasic catalyst system. The only hydroformylation product (1,4-diacetoxy-2-formyl butane, DAFB) formed was found to deacetoxylate completely to 2-formyl-4-acetoxybutene (FAB), thus allowing a one-pot synthesis of FAB, an important intermediate for Vitamin A. Experimental data on the concentration-time and CO/H-2 consumption-time profiles were obtained, and the effects of DAB concentration, CO partial pressure, H-2 partial pressure, and catalyst concentration were studied in a stirred batch reactor over a temperature range of 338-358 K. The effect of aqueous phase holdup on the initial rate of hydroformylation and analysis of gas-liquid and liquid-liquid mass transfer effects were also investigated to identify the reaction rate data operating in a kinetic regime. A rate equation based on the known hydroformylation reaction mechanism was used to fit the experimental rate data and to evaluate kinetic parameters. The agreement between the model prediction and the experimental data was found to be excellent. The activation energy was calculated as 30.1 kJ/mol. The biphasic catalyst system reported here is not only efficient for catalyst-product separation but also provides a tandem synthesis of Vitamin A intermediate, FAB.

}, issn = {0888-5885}, doi = {10.1021/ie0700821}, author = {Chansarkar, Rashmi and Kelkar, Ashutosh A. and Chaudhari, Raghunath V.} } @article { ISI:000245350600013, title = {Butylation of toluene: influence of zeolite structure and acidity on 4-tert-butyltoluene selectivity}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {265}, number = {1-2}, year = {2007}, month = {MAR}, pages = {109-116}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Vapour phase alkylation of toluene with tert-butyl alcohol was studied over the large pore zeolites H beta, HY and HMCM-22. The influence of the acidity, reaction temperature, run duration, feed rate (WHSV) and molar ratio of the reactants on conversion of toluene and selectivity for 4-tertbutyl toluene was studied. Among the isomers formed during the reaction, the para-isomer was the predominant one, followed by the meta-isomer, while no ortho-isomer was found in the products due to steric factors. 4-tert-Butyl toluene selectivity decreases at higher temperatures, while going through a maximum in the 413-433 K temperature range. Zeolite HY with a high silica to alumina ratio (SiO2/Al2O3 = 80), that has strong acidity, but lower acid site density, possesses high activity for toluene conversion, high alkylation selectivity and also high para-selectivity. The improved para-selectivity of high silica HY zeolite is attributed to the low isomerization activity that results in the suppression of the secondary isomerization of 4-tert-butyl toluene. Both alkylation and selectivity are higher with feed mixtures containing a lower fraction of tert-butyl alcohol. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {4-t-butyltoluene, Acidity, butylation, large pore zeolites, Toluene}, issn = {1381-1169}, doi = {10.1016/j.molcata.2006.09.046}, author = {Pai, Shivanand and Gupta, Upendranath and Chilukuri, Satyanarayana V.} } @proceedings { ISI:000291657600151, title = {Ce-Al-MCM-41: an efficient catalyst for Mukaiyama-Michael reaction}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1161-1166}, publisher = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

The activity of cerium containing Al-MCM-41 mesoporous materials has been studied for carbon-carbon bond formation reaction like Mukaiyama-Michael reaction under mild liquid phase conditions. The catalysts were synthesized by hydrothermal method at 383 K for 24-36 h in Teflon-lined autoclave and characterized thoroughly by XRD, UV-VIS, TEM, EPR, XPS, (27)Al NMR, NH(3)-TPD, pyridine-IR and AAS in order to obtain well-ordered M41S type materials. The Mukiayama-Michael reactions between silyl enol ether and alpha,beta-unsaturated ketones give Michael product in very good yields (100\% selectivity). The catalysts were reusable.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Kalita, Pranjal and Kumar, Rajiv}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @conference { ISI:000291657600157, title = {Chemoselective alkane oxidations by reactive superoxovanadium(V) species in vanadosilicate molecular sieves}, booktitle = {From ZEOLITES to Porous Mof Materials: The 40th Anniversary of International ZEOLITE Conference, Proceedings of The 15th International ZEOLITE Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1205-1212}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Unlike their titanium analogs, vanadosilicate molecular sieves catalyze the oxidation of the terminal (primary) C-H bonds in paraffins. This dissimilarity is attributed to differences in the type of reactive superoxo species generated on contact with oxidant. The latter were identified and characterized by in situ EPR and DRUV-vis spectroscopic techniques. By a suitable choice of silicate structure (VS-1 or V-MCM-41), solvent and oxidant (H(2)O(2), tert.-butyl hydroperoxide or H(2)+O2()), the V-O bond covalency and mode of O-O bond cleavage in the oxo-species and thereby, the chemoselectivity in the oxidation of the terminal carbon atoms in paraffins could be controlled.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Srinivas, D. and Ratnasamy, P.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article {sanjayan, title = {CO2 reforming of methane to syngas over highly active and stable supported CoOx (accompanied with MgO, ZrO2 or CeO2) catalysts}, journal = {Applied Catalysis A-General}, volume = {316}, number = {1}, year = {2007}, month = {JAN}, pages = {47-52}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

{Catalytically inactive CoOx-MgO (calcined at 900 degrees C) becomes highly active and selective in the CO2 reforming of methane to syngas when it is deposited on a commercial low surface-area macro-porous silica-alumina support (SA-5205) or when CoOx is deposited on the support precoated with MgO. Both the supported CoOx and MgO containing catalysts (CoOx -MgO/SA-5205 and CoOx/MgO/SA-5205) show high methane conversion (\> 98\%) activity and H-2 selectivity (\> 94\%) and also high stability against carbon deposition [

}, keywords = {arylboronic acids, diarylmethylidenefluorene, dibromomethylidenefluorene, Pd-mediated coupling, Suzuki reaction}, issn = {0936-5214}, doi = { 10.1016/j.apcata.2006.09.016}, author = {Mondal, Kartick C. and Choudhary, Vasant R. and Joshi, Upendra A.} } @article { ISI:000249894100012, title = {Convenient formal synthesis of (+/-)-paroxetine}, journal = {Synthetic Communications}, volume = {37}, number = {18}, year = {2007}, month = {SEP}, pages = {3143-3149}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A formal total synthesis of antidepressant (+/-)-paroxetine employing a solvent-free Heck reaction is disclosed.

}, keywords = {antidepressants, carbamate, electrophile, Heck reaction, piperidines}, issn = {0039-7911}, doi = {10.1080/00397910701545130}, author = {Chavan, Subhash P. and Khobragade, Dushant A. and Pathak, Ashok B. and Kalkote, Uttam R.} } @article { ISI:000246329700015, title = {Cyclic voltammetry, electrochemical impedance and ex situ X-ray diffraction studies of electrochemical insertion and deinsertion of lithium ion into nanostructured organic-inorganic poly(3,4-ethylenedioxythiophene) based hybrids}, journal = {Journal of Electroanalytical Chemistry}, volume = {603}, number = {2}, year = {2007}, month = {MAY}, pages = {287-296}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

In this work, we discuss the electrochemical insertion and deinsertion of lithium into poly(3,4-ethylenedioxythiophene) PEDOT-V(2)O(5) nanohybrids by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and powder ex situ X-ray diffraction (XRD) studies with special emphasis on their application potential as cathode materials for rechargeable Lithium batteries. The interlayer spacing of crystalline V(2)O(5) expands from 0.43 to 1.41 nm by the intercalation of PEDOT nanoribbons prepared by a microwave irradiation method. Cyclic voltammetry studies of PEDOT-V(2)O(5) hybrid at a slow scan rate of 0.058 mVs(-1) between 2.0-4.3 V vs. Li/ Li(+), demonstrates that structural transitions Of V(2)O(5) are suppressed and more facile intercalation features appear in terms of well-defined reversible cathodic and anodic peaks when compared to that at higher scan rate. Electrochemical Impedance studies of PEDOT-V(2)O(5) hybrid as cathode at ambient temperature with lithium metal foil as both counter and reference electrodes in 1 M LiPF(6) in a mixture of ethylene and diethylcarbonate (50:50 by volume) between the range 2.0-4.3 V reveals the usefulness of these materials. The observed capacity fading during cycling in terms of surface passivation and structural transformations is also investigated by CV, EIS and XRD analysis. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {cyclic voltammetry, ex situ XRD studies, high capacity lithium batteries, impedance studies, nanostructured hybrid materials}, issn = {1572-6657}, doi = {10.1016/j.jelechem.2007.02.013}, author = {Murugan, A. Vadivel and Reddy, M. V. and Campet, Guy and Vijayamohanan, K.} } @article { ISI:000250636200009, title = {Decomposition and/or hydrogenation of hydrogen peroxide over Pd/Al2O3 catalyst in aqueous medium: factors affecting the rate of H2O2 destruction in presence of hydrogen}, journal = {Applied Catalysis A-General}, volume = {332}, number = {1}, year = {2007}, month = {NOV}, pages = {70-78}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydrogen peroxide destruction by its decomposition and/or hydrogenation to water in the presence of H-2 over Pd(5 wt.\%)/Al2O3 catalyst in an aqueous reaction medium, similar to that used in the H-2-to-H2O2 oxidation, has been thoroughly investigated at different reaction conditions. The H2O2 destruction is strongly influenced by the oxidation state of Pd in the catalyst and also by the presence of different halide anions (viz. F-, Cl-, Br- and I-) in the acidic aqueous medium or in the catalyst, depending upon the concentration of halide anions. The cations associated with halide anions have, however, a little or no influence on the H2O2 destruction. The iodide anions strongly poisoned the catalyst, even at their very low concentration. The fluoride anions have only a small effect on the H2O2 destruction. The chloride or bromide anions drastically inhibit the rapid H2O2 decomposition, but promote the slower H2O2 hydrogenation. The H2O2 destruction reactions are strongly influenced by the halide anion and acid concentrations. The presence of acid (protons) plays a very important role in drastically reducing the H2O2 destruction, particularly in the presence of chloride anions. Both in the presence and absence of Cl- or Br- anions, the H2O2 destruction activity of the catalyst is markedly reduced because of the oxidation of Pd but it is drastically increased due to the presence of H-2. A plausible reaction mechanism for the rapid H2O2 decomposition and slower H2O2 hydrogenation reactions, prevailing under the different reaction conditions, has also been discussed. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {decomposition of H2O2, halide anions as catalyst promoter or indicator, Hydrogen peroxide, hydrogenation of H2O2, Pd/Al2O3}, issn = {0926-860X}, doi = {10.1016/j.apeata.2007.08.004}, author = {Choudhary, Vasant R. and Samanta, Chanchal and Jana, Prabhas} } @article { ISI:000246282600007, title = {Density functional static dipole polarizability and first-hyperpolarizability calculations of Na-n (n=2, 4, 6, 8) clusters using an approximate CPKS method and its comparison with MP2 calculations}, journal = {Journal of Chemical Theory and Computation}, volume = {3}, number = {3}, year = {2007}, month = {MAY}, pages = {716-727}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{We report the static dipole polarizability and first-hyperpolarizability of the sodium atom clusters, Na-n

}, issn = {1549-9618}, doi = {10.1021/ct6003627}, author = {Sophy, K. B. and Calaminici, Patrizia and Pal, Sourav} } @article { ISI:000251208900068, title = {Direct formation of H2O2 from H-2 and O-2 and decomposition/hydrogenation of H2O2 in aqueous acidic reaction medium over halide-containing Pd/SiO2 catalytic system}, journal = {Catalysis Communications}, volume = {8}, number = {12}, year = {2007}, month = {DEC}, pages = {2222-2228}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Formation of H2O2 from H-2 and O-2 and decomposition/hydrogenation of H2O2 have been studied in aqueous acidic medium over Pd/SiO2 catalyst in presence of different halide ions (viz. F-, Cl- and Br-). The halide ions were introduced in the catalytic system via incorporating them in the catalyst or by adding into the reaction medium. The nature of the halide ions present in the catalytic system showed profound influence on the H2O2 formation selectivity in the H-2 to H2O2 oxidation over the catalyst. The H2O2 destruction via catalytic decomposition and by hydrogenation (in presence of hydrogen) was also found to be strongly dependent upon the nature of the halide ions present in the catalytic system. Among the different halides, Br- was found to selectivity promote the conversion of H-2 to H2O2 by significantly reducing the H2O2 decomposition and hydrogenation over the catalyst. The other halides, on the other hand, showed a negative influence on the H2O2 formation by promoting the H-2 combustion to water and/or by increasing the rate of decomposition/hydrogenation of H2O2 over the catalyst. An optimum concentration of Br- ions in the reaction medium or in the catalyst was found to be crucial for obtaining the higher H2O2, yield in the direct synthesis. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Br- catalyst promoter, direct H2O2 formation, H2O2 decomposition, Pd/SiO2 catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.05.007}, author = {Samanta, Chanchal and Choudhary, Vasant R.} } @article { ISI:000249542900010, title = {Direct oxidation of H-2 to H2O2 over Br and F-promoted Pd/Al2O3 in aqueous acidic medium: influence of the concentration of Br and F and the method of incorporation of the two halogens in the catalyst on their beneficial synergetic effect on the net H2O2}, journal = {Applied Catalysis A-General}, volume = {329}, year = {2007}, month = {OCT}, pages = {79-85}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Influence of the addition of F (0-1.1 mmol/g) in the pre-brominated Pd/Al2O3 (Br loading = 0.13 mmol/g) and also that of Br (0.13 mmol/g) in the pre-fluorinated Pd/Al2O3 (F loading = 0.53 mmol/g) on the net H2O2 formation in the H-2-to-H2O2 oxidation (with H-2/O-2 mole ratio of 1.0) over the halogenated catalysts in aqueous acidic (0.1 M H3PO4) medium have been investigated. In both the cases, the highest synergetic effect (resulting in the highest net H2O2 formation) produced by the addition of other halogen is observed at its optimum concentration (viz. 0.13 mmol Br/g in the fluorinated Pd/Al2O3 and 0.13 mmol F/g in the pre-brominated Pd/Al2O3). The beneficial synergetic effect of the two halogens is also found to be strongly influenced by the way of incorporation of the two halogens in the catalyst. The enhancement in the net rate of H2O2 formation due to the synergetic effect for the different methods of Pd/Al2O3 halogenation is in the following order: simultaneous bromination and fluorination \< first fluorination and then bromination \< first bromination and then fluorination. The fluorination (at optimum concentration of 0.13 mmol F/g) of the pre-brominated (0.13 mmol Br/g) Pd/Al2O3 led to the best catalyst for the H-2-to-H2O2 oxidation with 100\% H-2 conversion and 78\% H2O2 yield/selectivity. The destruction of H2O2 by its decomposition and/or hydrogenation over the halogenated catalysts has also been studied. (c) 2007 Published by Elsevier B.V.

}, keywords = {F and Br-promoted Pd/Al2O3, Hydrogen peroxide, oxidation of H-2-to-H2O2, synergetic effect of F and Br}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.06.024}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000251244900026, title = {Direct oxidation of hydrogen to hydrogen peroxide over Pd (or PdO)/Al2O3 in aqueous reaction medium: influence of different acids and halide anions in reaction medium on formation and destruction of H2O2}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {25}, year = {2007}, note = {Joint 6th International Symposium on Catalysis in Multiphase Reactors/5th International Symposium on Multifunctional Reactors (CAMURE-6/ISMR-5-), Pune, INDIA, JAN 14-17, 2007}, month = {DEC}, pages = {8566-8573}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Effects of different mineral acids (viz. H2SO4, H3PO4, HNO3, HCl, HBr, and HI), acid (H3PO4) concentration, different halide anions (viz. F-, Cl-, Br-, and I-), and halide anion concentration in aqueous reaction medium on the H2O2 formation (in H-2-to-H2O2 oxidation) and/or on the H2O2 destruction (by H2O2 decomposition and hydrogenation) activities of Pd (or PdO)/Al2O3 catalyst (at 300 K and atmospheric pressure) have been thoroughly investigated. Among the different halide anions, Br- anions are most effective for promoting the H2O2 formation and inhibiting the H2O2 destruction by both the H2O2 decomposition and/or hydrogenation. The cations associated with the halide anions, however, have only a little or no influence on both the H2O2 formation and destruction. The concentration of the different halide anions has a strong influence on the H-2 conversion and H2O2 formation and destruction activities of the Pd/Al2O3. The H2O2 formation activity in the presence of Br- or Cl- anions is highest at the optimum concentration of halide (about 1.0 mmol/dm(3)). it is also highest at the optimum concentration of phosphoric acid (between 0.1 and 0.3 mol/dm(3)). In general, the H2O2 formation is increased with decreasing the H2O2 destruction activity of the catalyst, indicating a close relationship between the two. Br- anions act as an excellent catalyst promoter for Pd/Al2O3 catalyst, but they show only a small promoting effect for PdO/Al2O3 catalyst. The next choice for halide promoter for Pd/Al2O3 catalyst is Cl- anions. F- and I- anions are, however, catalyst inhibitor and strong poison, respectively, for the H2O2 formation. At the same concentration, Br- anions are more effective than Cl- anions for inhibiting the H2O2 destruction reactions over Pd/Al2O3 Catalyst. For both halide promoters (Cl- and Br-), the net H2O2 formation is controlled by the H2O2 hydrogenation rather than by the H2O2 decomposition.

}, issn = {0888-5885}, doi = {10.1021/ie061653c}, author = {Choudhary, Vasant R. and Ingole, Yugesh V. and Samanta, Chanchal and Jana, Prabhas} } @article { ISI:000242759500015, title = {Direct synthesis of H2O2 from H-2 and O-2 over Pd/H-beta catalyst in an aqueous acidic medium: influence of halide ions present in the catalyst or reaction medium on H2O2 formation}, journal = {Catalysis Communications}, volume = {8}, number = {1}, year = {2007}, month = {JAN}, pages = {73-79}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The influence of different halide ions present in the catalyst or reaction medium on the performance of Pd/H-beta catalyst in the direct H2O2 synthesis in an aqueous acidic (0.03 M H3PO4) reaction medium at 27 degrees C and atmospheric pressure has been thoroughly investigated. The results showed a strong influence of both the bulk Pd oxidation state in the catalyst and the halide ions added to the reaction medium on the performance of the catalyst in the H-2 to H2O2 oxidation, H2O2 decomposition/hydrogenation reactions. The different ammonium halides impregnated reduced Pd/H-beta catalyst calcined in inert (N-2) and oxidizing (air) gaseous atmospheres also revealed that the bulk Pd oxidation state and nature of the halide ions present in the catalyst together control the overall performance of the catalyst in the H2O2 formation reaction. The presence of halide ions in reaction medium or in the catalyst significantly changes the selectivity for H2O2 formation in the direct H2O2 synthesis. Bromide ions are found to remarkably enhance the H2O2 selectivity in the direct H2O2 synthesis irrespective of the Pd oxidation state in the catalyst. The promoting action of Br- is attributed mainly to the large decrease in the H2O2 decomposition and hydrogenation activities of the catalyst and also inhibition for the non-selective H-2-to-water oxidation over the catalyst. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {direct H2O2 synthesis, H-P supported Pd catalyst, H2O2 decomposition, H2O2 hydrogenation, promoting action of bromide ions}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.05.027}, author = {Samanta, Chanchal and Choudhary, Vasant R.} } @article { ISI:000249864300003, title = {Direct synthesis of H2O2 from H-2 andO(2) and decomposition/hydrogenation of H2O2 in an aqueous acidic medium over halide-modified Pd/Al(2)O3 catalysts}, journal = {Applied Catalysis A-General}, volume = {330}, year = {2007}, month = {OCT}, pages = {23-32}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Direct synthesis Of H2O2 from its elements was carried out in an acidic aqueous reaction medium over halide-modified oxidized and reduced Pd/ Al2O3 catalysts under very mild conditions (at 27 degrees C and atmospheric pressure). The halide ions were introduced into the catalyst by incorporating halide ions into supported Pd/gamma-Al2O3 catalyst or via depositing halide ions on the support (gamma-Al2O3) prior to Pd deposition. The H2O2 decomposition and hydrogenation over the corresponding catalysts were also carried out under the reaction conditions similar to those employed for the H2O2 synthesis in order to elucidate the factors strongly affecting the H2O2 yield/selectivity in the direct H2O2 process. The performance of halide-modified Pd/Al2O3 catalysts in the direct H2O2 synthesis revealed that halide insertion in the catalyst system prior to or after Pd deposition on the support had comparable qualitative effect on the H2O2 formation. Both the Pd oxidation state and the nature of the halide ions had strong influences on the H-2 conversion (in direct H2O2 Synthesis process) and H2O2 decomposition and/or hydrogenation reaction. While the effect of Pd oxidation state on the H2O2 formation was significant for the catalytic system containing F- and Cl- ions, the influence of the Pd oxidation state was found less important for the catalyst system containing Br- ions; the H2O2 formation selectivity increased significantly due to the presence of Br- ions, irrespective of the Pd oxidation state. The nature of the H2O2 destruction pathway (i.e. hydrogenation and/or decomposition) in the presence of hydrogen over halide-modified Pd/Al2O3 catalysts was found to be strongly dependent upon the nature of the halide ions incorporated in the catalyst during halide-modification of the catalyst. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {direct H2O2 synthesis, H2O2 decomposition, H2O2 hydrogenation, halide-modification, Pd oxidation state}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.06.030}, author = {Samanta, Chanchal and Choudhary, Vasant R.} } @article { ISI:000250556100042, title = {Effect of surface chemistry of Fe-Ni nanoparticles on mechanistic pathways of azo dye degradation}, journal = {Environmental Science \& Technology}, volume = {41}, number = {21}, year = {2007}, month = {NOV}, pages = {7437-7443}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The degradation of Orange G a monoazo dye, in aqueous solutions was investigated using as-synthesized and stored Fe-Ni bimetallic nanoparticles. Batch experiments with a nanocatalyst loading of 3 g/L showed complete. dye degradation (150 mg/L) after 10 min of reactiontime. HPLC-MS analysis of the degradation products showed that assynthesized nanoparticles reductively cleaved the azo linkage to produce aniline as the major degradation product. However, 1-year-stored nanoparticles showed an oxidative degradation of Orange G through a hydroxyl-radical induced coupling of parent and/or product molecules. XPS analysis in corroboration with HPLC-MS data showed that the surface chemistry between Fe and Ni in assynthesized and stored nanoparticles play a crucial role. in directing the mode of degradation. Reductive dye degradation using as-synthesized nanoparticles proceeded through hydride transfer from nickel, whereas formation of a Fe (2+) -Ni(0) galvanic cell in stored nanoparticles generated hydroxyl radicals from water in a nonFenton type reaction. The latter were responsible for the generation of radical centers on the dye molecule, which led to a coupling-mediated oxidative degradation of Orange G. The generation of hydroxyl radicals is further substantiated with radical quenching experiments using ascorbic acid indicating that stored nanoparticles degrade Orange G through a predominantly oxidative mechanism. HPLC-MS and XPS analysis of dye degradation using as-synthesized nanoparticles exposed to air and water confirmed that the reductive or oxidative degradation capability of Fe-Ni nanoparticles is decided by the time and type of catalyst aging process.

}, issn = {0013-936X}, doi = {10.1021/es071107q}, author = {Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000252219700011, title = {Efficient and practical total synthesis of (+/-)-alpha-cuparenone}, journal = {Synthesis-Stuttgart }, number = {24}, year = {2007}, month = {DEC}, pages = {3827-3830}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A one-pot cyclopentannulation approach as the key step for the total synthesis of (+/-)-alpha-cuparenone is described.

}, keywords = {Alkylation, annulation, hydroboration-oxidation, reduction}, issn = {0039-7881}, doi = {10.1055/s-2007-990899}, author = {Chavan, Subhash P. and Dhawane, Abasaheb N. and Kalkote, Uttam R.} } @article { ISI:000249394900019, title = {Efficient synthesis of azetidine-2,3-diones from L-(+)-diethyl tartrate}, journal = {Synlett}, number = {14}, year = {2007}, month = {SEP}, pages = {2242-2246}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A convenient route to enantiopure azetidine-2,3-diones is described. The chiral ketene generated from commercially available L-(+)-diethyl tartrate on Staudinger cycloaddition with different imines gave spiro-beta-lactams in good yields. These spiro-beta-lactams were transformed into azetidine-2,3-diones in excellent yields in a two-step process.

}, keywords = {Cycloaddition, imines, lactams, spiro compounds, stereoselective synthesis}, issn = {0936-5214}, doi = {10.1055/s-2007-985563}, author = {Chincholkar, Pinak M. and Puranik, Vedavati G. and Deshmukh, Abdul Rakeeb A. S.} } @article { ISI:000251244900020, title = {Environmentally benign catalytic hydroformylation-oxidation route for naproxen synthesis}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {25}, year = {2007}, note = {Joint 6th International Symposium on Catalysis in Multiphase Reactors/5th International Symposium on Multifunctional Reactors (CAMURE-6/ISMR-5-), Pune, INDIA, JAN 14-17, 2007}, month = {DEC}, pages = {8480-8489}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydroformylation of 6-methoxy-2-vinylnaphthalene (MVN), using homogeneous Rh(CO)acac) as a catalyst and a chelating bidentate ligand (1,2-bis-(diphenylphosphino) ethane, dppe), followed by oxidation of the product (2-(6-methoxynaphthyl) propanal, 2-MNP) has been studied as an alternative route for the synthesis Of D,L-naproxen. The feasibility of the MVN hydroformylation route has been demonstrated, and a detailed study has been reported on the key hydroformylation step. The roles of the catalyst, ligands, and solvents, as well as the effect of reaction conditions on the reaction rate and regioselectivity of the product 2-MNP, have been investigated. With Rh(CO)2(acac) as a catalyst and dppe as a ligand, \> 98\% selectivity to 2-MNP (an important precursor to D,L-naproxen) has been achieved. A possible mechanism to explain the variation in regioselectivity with Rh(CO)(2)(acac) as a catalyst and dppe as a ligand has been discussed. The kinetics of the hydroformylation step has been investigated and a rate equation has been proposed. The second step in the proposed route for naproxen-the oxidation of 2-MNP to 2-(6-methoxynaphthyl) propanoic acid (2-MNPA, or naproxen) - has been studied using Na2WO4 as a catalyst and tetrabutyl ammonium hydrogen sulfate (TBAHS) as the phase-transfer catalyst with H2O2 as the oxidant for the first time. Screening of the catalysts that consisted of the early transition metals, such as salts of tungsten, vanadium, and molybdenum showed that Na2WO4 gives the best performance for the oxidation step with \> 80\% selectivity to 2-(6-methoxynaphthyl)propanoic acid (2-MNPA/naproxen). This study would be valuable in developing a new environmentally benign route for naproxen synthesis.

}, issn = {0888-5885}, doi = {10.1021/ie0700866}, author = {Rajurkar, Kalpendra B. and Tonde, Sunil S. and Didgikar, Mahesh R. and Joshi, Sunil S. and Chaudhari, Raghunath V.} } @article { ISI:000243799400004, title = {Estimation of gross calorific value of coals using artificial neural networks}, journal = {Fuel}, volume = {86}, number = {3}, year = {2007}, month = {FEB}, pages = {334-344}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The gross calorific value (GCV) is an important property defining the energy content and thereby efficiency of fuels, such as coals. There exist a number of correlations for estimating the GCV of a coal sample based upon its proximate and/or ultimate analyses. These correlations are mainly linear in character although there are indications that the relationship between the GCV and a few constituents of the proximate and ultimate analyses could be nonlinear. Accordingly, in this paper a total of seven nonlinear models have been developed using the artificial neural networks (ANN) methodology for the estimation of GCV with a special focus on Indian coals. The comprehensive ANN model developed here uses all the major constituents of the proximate and ultimate analyses as inputs while the remaining six sub-models use different combinations of the constituents of the stated analyses. It has been found that the GCV prediction accuracy of all the models is excellent with the comprehensive model being the most accurate GCV predictor. Also, the performance of the ANN models has been found to be consistently better than that of their linear counterparts. Additionally, a sensitivity analysis of the comprehensive ANN model has been performed to identify the important model inputs, which significantly affect the GCV. The ANN-based modeling approach illustrated in this paper is sufficiently general and thus can be gainfully extended for estimating the GCV of a wide spectrum of solid, liquid and gaseous fuels. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Artificial neural network, gross calorific value (GCV), proximate and ultimate analyses}, issn = {0016-2361}, doi = {10.1016/j.fuel.2006.07.036}, author = {Patel, Shagufta U. and Kumar, B. Jeevan and Badhe, Yogesh P. and Sharma, B. K. and Saha, Sujan and Biswas, Subhasish and Chaudhury, Asim and Tambe, Sanjeev S. and Kulkarni, Bhaskar D.} } @conference { ISI:000291657600254, title = {Ethane bridged hybrid mesoporous silsesquioxanes with sulfonic acid functionalities: synthesis, characterization and catalytic applications}, booktitle = {From Zeolites to Porous Mof Materials: the 40th Anniversary of International Zeolite Conference, Proceedings of the 15th International Zeolite Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1899-1904}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Periodic mesoporous organosilicas having -CH(2)-CH(2)- groups in the framewall positions and sulfonic acid groups in the pore channels were prepared using 1,2-bis(triethoxysilyl) ethane, 3-mercaptopropyltriethoxysilane and cetyltrimethylammonium surfactant, under basic conditions, by a one-pot synthesis method. XRD, N(2) sorption isotherm and TEM analysis revealed that the mesoporous structural ordering is retained after the functionalization of organic groups while solid-state NMR techniques like (13)C CP MAS NMR and (29)Si MAS NMR show the presence of sulfonic acid groups and the stability of the mesoporous framework with integrated ethane moieties as bridging groups. The hybrid material was more active, selective and stable than the conventional sulfonic acid containing mesoporous catalysts in the Claisen-Schmidt condensation of acetophenone with benzaldehyde to form chalcone.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Shylesh, S. and Samuel, Prinson P. and Parischa, Renu and Singh, A. P.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article { ISI:000243819800014, title = {Facile total synthesis of (+/-)-alpha-cuparenone employing diallylation and RCM as key steps}, journal = {Tetrahedron Letter}, volume = {48}, number = {6}, year = {2007}, month = {FEB}, pages = {965-966}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short and concise total synthesis of alpha-cuparenone employing one-pot diallylation and RCM as the key steps is described. (c) 2006 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.12.023}, author = {Chavan, Subhash P. and Dhawane, Abasaheb N. and Kalkote, Uttam R.} } @article { ISI:000245301300004, title = {Ferroelectric and ferromagnetic properties of (x)BaTiO3+(1-x)Ni0.94Co0.01Cu0.05Fe2O4 composite}, journal = {Journal of Physics D-Applied Physics}, volume = {40}, number = {7}, year = {2007}, month = {APR}, pages = {1864-1868}, publisher = {IOP PUBLISHING LTD}, type = {Article}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

A group of elastically coupled ferroelectric and ferrite composites with the general formula (x) BaTiO3 + (1 - x) Ni0.94Co0.01Cu0.05Fe2O4 (where x = 0.85, 0.70 and 0.55) was prepared by the standard ceramic reaction method. The x-ray diffraction pattern of the composite reveals a spinel phase formation for the ferrite and perovskite phase formation for the ferroelectric phase without any other phase. The SEM micrographs were taken to determine the average grain size. The sintered composites exhibit typical hysteresis loops at room temperature. The effect of constituent phase variation on the hysteresis behaviour and the dielectric properties was examined. The parameters such as spontaneous polarization (P-s), breakdown voltage (E-b) and saturation magnetization (M-s) of the composites vary with the ferroelectric/ ferrite content. The temperature dependence of dielectric behaviour at a frequency of 1 kHz was also studied. With increasing content of BaTiO3, the dielectric constant increases and the Curie temperature decreases.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/40/7/004}, author = {Devan, R. S. and Deshpande, S. B. and Chougule, B. K.} } @article { ISI:000243704000028, title = {First enantiospecific synthesis of (-)-heritol: absolute configuration determination}, journal = {Tetrahedron Letters}, volume = {48}, number = {4}, year = {2007}, month = {JAN}, pages = {643-646}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The first enantiospecific synthesis of (-)-heritol, from naturally occurring (R)-(+)-citronellal and confirmation of its absolute configuration, is described. (c) 2006 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.11.123}, author = {Chavan, Subhash P. and Thakkar, Mahesh and Kalkote, Uttam R.} } @article { ISI:000243831600013, title = {Formation from direct oxidation of H-2 and destruction by decomposition/hydrogenation of H2O2 over Pd/C catalyst in aqueous medium containing different acids and halide anions}, journal = {Applied Catalysis A-General}, volume = {317}, number = {2}, year = {2007}, month = {FEB}, pages = {234-243}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Direct oxidation of H-2 by O-2 to H2O2 and decomposition/hydrogenation of H2O2 (at 27 degrees C and atmospheric pressure) over Pd/C catalyst in an aqueous acidic reaction medium have been thoroughly investigated using different mineral acids (viz. 0.1 N H2SO4, H3PO4, H3BO3, HNO3, HCl, HBr or HI) and/or halide anions (viz. F-, Cl-, Br- or I-), covering their wide concentration range (0-24 mmol/dm(3)), in the reaction medium. In the absence of any externally added halide, appreciable H2O2 formation in the H2 oxidation occurred only when the medium contained HCl. However, the rates of H2O2 decomposition and hydrogenation are greatly reduced because of the presence of any acid; the influence on the H2O2 decomposition was, however, much larger for the halo acids. In the presence of acid (0.1 N H3PO4 or H2SO4), the H-2-to-H2O2 formation reaction is greatly enhanced by the externally added halide anions up to their optimum concentrations. However, above the optimum halide anion concentration, it is inhibited more than the H-2-to-water formation (parallel) reaction, causing a decrease in both the H2O2 yield and selectivity. Whereas, the H-2 conversion and H2O2 destruction activities of the catalyst are decreased continuously with increasing the halide anion (except F-) concentration. Among the halides, chloride is the best halide promoter for Pd/C catalyst in the H-2-to-H2O2 oxidation. At the optimum Cl-concentration (5.4 mmol/dm(3)), both the H-2 conversion and H2O2 yield are passed through a maximum and the H2O2 decomposition is greatly inhibited with increasing the phosphoric acid concentration. In the absence of either the chloride anions or the acid (or both) in the reaction medium, only a little or no H2O2 is formed in the H-2 oxidation and also the rate of H2O2 destruction is very fast, particularly in the presence of H-2; the rapid destruction of H2O2 is mainly due to its decomposition rather than its hydrogenation. The best H-2-to-H2O2 oxidation results are obtained at the optimum concentrations of both the acid and halide anions. In the presence of acid and chloride (or bromide) promoter, the H2O2 hydrogenation dominates the H2O2 destruction and hence the net H2O2 formation is mainly controlled by the H2O2 hydrogenation. (c) 2006 Published by Elsevier B.V.

}, keywords = {H2O2 decomposition, H2O2 hydrogenation, halide anion promoters, Hydrogen peroxide, oxidation of H-2-to-H2O2, Pd/C catalyst}, issn = {0926-860X}, doi = {10.1016/j.apcata.2006.10.022}, author = {Choudhary, Vasant R. and Samanta, Chanchal and Jana, Prabhas} } @article { ISI:000251200200005, title = {GaClx- or GaAlClx-grafted Si-MCM-41: highly active and moisture insensitive/stable catalyst for the acylation and benzylation of benzene, naphthalene and substituted benzenes}, journal = {Applied Catalysis A-General}, volume = {333}, number = {1}, year = {2007}, month = {DEC}, pages = {42-48}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

GaClx- and GaAlClx-grafted Si-MCM-41 catalysts were prepared by reacting anhydrous GaCl3 and mixed anhydrous GaCl3 and AlCl3, respectively, with the terminal hydroxyl groups of Si-MCM-41 (pore size: 2.5 nm) in a dry non-aqueous reaction medium (CCl4) under reflux. The catalysts showed high activity for both the acylation and benzylation (with benzoyl chloride and benzyl chloride, respectively) of benzene, toluene, p-xylene, cumene, mesitylene, anisole and naphthalene. Both the catalysts are moisture insensitive or less moisture sensitive; the presence of moisture has a beneficial effect in the acylation over both the catalysts. The catalytically active sites of the GaClx-grafted Si-MCM-41 are (-O-)(2)GaCl (i.e. partially chlorided Ga anchored to Si through -O- linkage) species and the equivalent sites of the GaAlClx-grafted Si-MCM-41 are (-O-)(2)Ga(or Al)Cl and (-O-)(3)Ga(or Al) species. The high acylation/benzylation activities of both the catalysts even in the presence of moisture are attributed to their redox properties (Ga3+ -\> Ga1+) rather than to their Lewis acid properties. After the grafting/chemical bonding, the grafted gallium chloride catalyst showed much higher acylation activity but lower benzylation activity than the physically deposited (on Si-MCM-41) or unsupported GaCl3. The GaAlClx-grafted Si-MCM-41 showed higher acylation activity than the GaClx-grafted Si-MCM-41, due to a synergetic effect of the Ga and Al species. However, the relative benzylation activity of the two catalysts showed strong dependence upon the presence or absence of electron donating group(s) and also upon the electron donating ability of the group(s) attached to the aromatic nucleus. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {acylation benzylation, GaAlClx-grafted Si-MCM-41, GaClx-grafted Si-MCM-41, moisture insensitive}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.09.001}, author = {Choudhary, Vasant R. and Jha, Rani} } @article { ISI:000246754200022, title = {Generation of hydrogen peroxide via the selective reduction of oxygen by hydrazine sulfate over Br-promoted Pd/Al2O3 catalyst in an aqueous medium at ambient conditions}, journal = {Applied Catalysis A-General}, volume = {323}, year = {2007}, month = {APR}, pages = {202-209}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The in situ generation of H2O2 via the selective reduction of OZ by hydrazine sulfate (in an aqueous medium) has been thoroughly investigated over the Br-promoted Pd(or PdO)/Al2O3 catalyst. The influence of the following factors have been addressed in this study: (a) Br concentration (in the reaction medium or incorporated in the catalyst); (b) reaction conditions (viz. reaction time, temperature); (c) concentrations of reducing agent and phosphoric acid in the reaction medium. Decomposition of N2H4 (from NH4-H2SO4) and its reaction with H2O2 under similar reaction conditions (in the absence of O-2) have also been studied. H2O2, which is an intermediate product of the O-2 reduction, is involved in further consecutive reactions. It can be converted to water via its decomposition and/or reaction with the unconverted NZH(4). In the presence of Br promoter, the later (reaction with unconverted N2H4) is more dominant. Both the consecutive reactions are drastically retarded in the presence of protons and Br promoter. A plausible reaction mechanism has been proposed for illustrating the role of the protons and Br promoter in the selective formation of H2O2 in the O-2 reduction process. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {brominated Pd/Al2O3 catalyst, hydrazine sulfate, Hydrogen peroxide, in situ H2O2 generation, oxygen reduction, Pd/Al2O3 catalyst}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.02.014}, author = {Choudhary, Vasant R. and Jana, Prabhas and Samanta, Chanchal} } @article { ISI:000246157400035, title = {Hydrogenation of hydrogen peroxide over palladium/carbon in aqueous acidic medium containing different halide anions under static/flowing hydrogen}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {10}, year = {2007}, month = {MAY}, pages = {3237-3242}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Kinetics of the hydrogenation of hydrogen peroxide (at 278 and/or 300 K) over Pd(5 wt\%)/carbon in aqueous medium with or without containing acid or different halide anions (F-, Cl-, Br-, or I-) under static H-2 (i.e. batchwise) or flowing H-2 (i.e. semi-batchwise) at atmospheric pressure have been thoroughly studied. In the absence of protons or halide anions and also in the presence of F- anions, a very rapid decomposition of H2O2 (H2O2 -\> H2O + 0.5O(2)) predominates over the H2O2 hydrogenation (H2O2 + H-2 -\> 2H(2)O). However, in the presence of both the protons and Cl- or Br- anions, the H2O2 conversion occurs mainly by the hydrogenation reaction. The hydrogenation is found to be a zero-order reaction with respect to the H2O2 concentration, and its activation energy and frequency factor are strongly influenced by the halide anions. The hydrogenation is found to be more and more inhibited with increasing halide (Cl- or Br-) anion concentration. The cations associated with the halide anions have, however, only a very little influence on the hydrogenation. Iodide anions act as a very strong catalyst poison for the hydrogenation. In the presence of acid, the hydrogenation is very strongly influenced by the different halides, but, in the presence of halide anions (5.4 mmol/dm(3)), it is very mildly influenced by the different mineral acids (except HI). In the absence of protons, the Cl- and Br- anions are ineffective for inhibiting the rapid H2O2 decomposition. A role played by protons and halide anions for drastically inhibiting the rapid H2O2 decomposition is discussed.

}, issn = {0888-5885}, doi = {10.1021/ie0608408}, author = {Choudhary, Vasant R. and Samanta, Chanchal and Jana, Prabhas} } @conference { ISI:000291657600253, title = {Immobilization of Ntn hydrolases on APTES fuctionalized SBA-15}, booktitle = {From Zeolites to Porous Mof Materials: the 40th Anniversary of International Zeolite Conference, Proceedings of the 15th International Zeolite Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1891-1898}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

APTES Functionalized mesoporous silica SBA-15 molecular sieves have been prepared and used for immobilization of Penicillin G acylase. Physico chemical characterization was done by nitrogen adsorption, powder XRD and TEM methods to understand the nature of immobilized PGA enzyme. XRD data indicate a good mesoscopic order. The characteristic hexagonal features of SBA-15 were maintained in PGA immobilized SBA-15 samples. Incorporation of PGA does not affect the original pore structure of the parent SBA-15. The adsorption of PGA on SBA-15 from buffered solutions with a pH value, 7.8 has been studied as a model protein adsorption system. The maximum activity of the immobilized enzyme was observed at pH 7.8, slightly below the isoelectric point of the enzyme. The loading capacity of immobilized PGA is 34 mg protein per 0.5 g of SBA-15. The stability of Penicillin G acylase was enhanced by the physical entrapment in SBA-15.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Shah, Pallavi and Sridevi, N. and Prabhune, Asmita and Ramaswamy, Veda}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article { ISI:000250256700004, title = {In situ generation of hydrogen peroxide from reaction of O-2 with hydroxylamine from hydroxylammonium salt in neutral aqueous or non-aqueous medium using reusable Pd/Al2O3 catalyst}, journal = {Catalysis Communications}, volume = {8}, number = {11}, year = {2007}, month = {NOV}, pages = {1578-1582}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In situ generation of H2O2 with high yield can be accomplished by reacting 02 with NH2OH from hydroxylammonium salt [NH2OH.HCl or (NH2OH)(2) . H2SO4] in a neutral aqueous medium using a reusable heterogeneous Pd (1.0 wt\%)/Al2O3 catalyst, even at low temperature (10 degrees C), with the formation of harmless by-products (viz. N-2 and water). The presence of KCl or KBr in the medium has beneficial effect. The H2O2 generation is strongly influenced by the pH of medium, reaction period and temperature; best results are obtained at the optimum pH and reaction medium. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Hydrogen peroxide, hydroxylamine, Hydroxylammonium salt, in situ H2O2 generation, oxygen, Pd/AlO3 catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.01.003}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000243388500023, title = {Influence of electric field on the global and local reactivity descriptors: reactivity and stability of weakly bonded complexes}, journal = {Journal of Physical Chemistry A}, volume = {111}, number = {2}, year = {2007}, month = {JAN}, pages = {375-383}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The response of the global and local reactivity density-based descriptors (chemical potential, hardness, softness, Fukui function, and local softness) in the presence of external electric field has been studied for some of the simple prototype molecular systems. In addition to the analysis on the reactivity of these systems, the influence of the electric field on the interaction energy of the complexes formed by these systems has also been studied using the recently proposed semiquantitative model based on the local hard-soft acid-base principle. By using the inverse relationship between the global hardness and softness parameters, a simple relationship is obtained for the variation of hardness in terms of the Fukui function under the external electric field. It is shown that the increase in the hardness values for a particular system in the presence of external field does not necessarily imply that the reactivity of the system would be deactivated or vice versa.

}, issn = {1089-5639}, doi = {10.1021/jp065580m}, author = {Kar, Rahul and Chandrakumar, K. R. S. and Pal, Sourav} } @article {17}, title = {Interfacial deposition of Ag on Au seeds leading to AucoreAgshell in organic media}, journal = {Journal of Colloid and Interface Science}, volume = {312}, number = {16}, year = {2007}, month = {AUG}, pages = {498-505}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, keywords = {core-shell nanoparticles, Gold, HRTEM, interfacial seeded growth, Silver, XPS}, issn = {0021-9797}, doi = {10.1016/j.jcis.2007.03.032}, author = {Chandran, S. Prathap and Ghatak, J. and Satyam, P. V. and Sastry, Murall} } @article { ISI:000246157400036, title = {Kinetics of reductive alkylation of p-phenylenediamine with methyl ethyl ketone using 3\% Pt/Al2O3 catalyst in a slurry reactor}, journal = {Industrial \& Engineering Chemistry Research}, volume = {46}, number = {10}, year = {2007}, month = {MAY}, pages = {3243-3254}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Intrinsic kinetics of reductive alkylation of p-phenylenediamine (PPDA) with methyl ethyl ketone (MEK) using 3\% Pt/Al2O3 catalyst was studied in a slurry reactor. The overall reaction involves a combination of parallel and consecutive reactions involving equilibrium noncatalytic (homogeneous) and catalytic (heterogeneous) steps. For the purpose of kinetic modeling, the effects of PPDA concentration, catalyst loading, agitation speed, and partial pressure of hydrogen were studied in a temperature range of 373-413 K. Quantitative criteria were used to ensure that the reaction occurred in the kinetic regime. Different rate equations have been considered based on the elementary steps involving catalytic and noncatalytic reactions, which lay stress on the different types of interactions occurring between the reactants and the active catalyst sites. The best-fit rate model has been proposed by rigorous optimization and model discrimination procedures, by simulating the experimental concentration-time data. For the best-fit model, the agreement between the predicted and experimental data was found to be very good over a wide range of operating conditions.

}, issn = {0888-5885}, doi = {10.1021/ie0608556}, author = {Patil, Narendra G. and Roy, Debdut and Chaudhari, Amit S. and Chaudhari, Raghunath V.} } @article { ISI:000248145900007, title = {MgBr2-mediated ionic Diels-Alder reaction of acetals of alpha,beta-unsaturated aldehydes and ketones with 1,3-dienes}, journal = {Synthetic Communications}, volume = {37}, number = {14}, year = {2007}, month = {JUL}, pages = {2337-2343}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A facile, mild, and efficient methodology for the ionic Diels-Alder reaction of acetals of alpha,beta-unsaturated ketones and aldehydes as dienophiles with various 1,3- dienes employing MgBr2 as the Lewis acid catalyst to furnish corresponding Diels-Alder adducts at ambient temperature is described.

}, keywords = {acetals, Catalysts, Diels-Alder reactions, dienes}, issn = {0039-7911}, doi = {10.1080/00397910701410814}, author = {Chavan, Subhash P. and Ethiraj, Krishna S. and Dantale, Shubhada W.} } @article { ISI:000251763600036, title = {Modeling of bubble column slurry reactor for reductive alkylation of p-phenylenediamine}, journal = {Chemical Engineering Science}, volume = {62}, number = {24, SI}, year = {2007}, note = {8th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering, Indian Inst Technol Delhi, New Delhi, INDIA, DEC 16-19, 2007}, month = {DEC}, pages = {7290-7304}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A bubble column slurry reactor (BCSR) model has been developed for the reductive alkylation of p-phenylenediamine (PPDA) with methyl ethyl ketone (MEK) to N, N{\textquoteright}-di-secondary-alkyl-p-phenylenediamine (Di-amine). This particular reaction system is commercially relevant and involves a combination of parallel and consecutive reactions comprising equilibrium non-catalytic (homogeneous) and catalytic (heterogeneous) steps. The proposed model is based on the {\textquoteleft}mixing cell approach{\textquoteright}. In this work the mixing cell approach has been extended by including a liquid backflow stream from all but the bottommost mixing cell. The model incorporates the contributions of gas-liquid and liquid-solid mass transfer, heat effects, and complex multistep reaction kinetics. CFD model is used to estimate the extent of backflow among mixing cells and its dependence on operating parameters. The effect of gas and liquid velocities, catalyst loading, inlet PPDA concentration, and temperature on the conversion, selectivity, global rate of hydrogenation, and temperature rise is discussed. The comparison of the current approach with the traditional mixing cell model is discussed. The BCSR model presented here will be useful to provide guidelines for designing and improving overall performance of bubble column reactors. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {bubble columns, CFD, kinetics, Mathematical modeling, Reductive alkylation}, issn = {0009-2509}, doi = {10.1016/j.ces.2007.08.065}, author = {Chaudhari, Amit S. and Rampure, Mohan R. and Ranade, Vivek V. and Jaganathan, Rengaswamy and Chaudhari, Raghunath V.} } @article { ISI:000250085300004, title = {One-step preparation of nanosized Ag-PdCo-powder and its alloy formation at low temperature}, journal = {Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry}, volume = {37}, number = {7}, year = {2007}, month = {SEP}, pages = {531-539}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Nano-sized silver-palladium co-powder has been synthesized from silver nitrate-palladium chloride by wet chemical method. The present experimental conditions are applied for the first time for Ag-Pd co-powders wherein sodium formaldehyde sulfoxylate (SFS) has been used as an external reducing agent to simultaneously reduce respective metal salts. SFS reduces the metal salts at room temperature thus prevents formation of bigger particles of the respective metals in co-powder. Powder X-ray diffraction measurements ( XRD) and Transmission electron microscopy ( TEM) suggest the formation of nano-sized Ag-Pd co-powder with particle diameter in the range of about 25 nm. SEM shows that the powder morphology changes with temperature. Heat treatment of 90: 10 (Ag:Pd) composition showed shift in XRD peaks indicating alloy formation of Ag/Pd at lower temperature. Thick-films generated by use of the co-powder resulted in Ag/Pd alloy at about 500 degrees C as confirmed by the XRD. Thermal analysis showed that Ag/Pd co-powders initially gain the weight due to oxidation followed by the weight loss.

}, keywords = {alloy, Chemical synthesis, nano-powder, noble metal, Transition Metal}, issn = {1553-3174}, doi = {10.1080/15533170701563707}, author = {Khanna, P. K. and Singh, N. and Kulkarni, D. and Marimuthu, R. and Charan, Shobhit and Patil, K. R. and Jain, G. H.} } @article { ISI:000244735900014, title = {Organocatalytic sequential alpha-amination-horner-wadsworth-emmons olefination of aldehydes: enantioselective synthesis of gamma-amino-alpha,beta-unsaturated esters}, journal = {Organic Letters}, volume = {9}, number = {6}, year = {2007}, month = {MAR}, pages = {1001-1004}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A novel and highly enantioselective method for the synthesis of gamma-amino-alpha,beta-unsaturated esters via tandem alpha-amination-Horner-Wadsworth-Emmons (HWE) olefination of aldehydes is described. The one-pot assembly has been demonstrated for the construction of functionalized chiral 2-pyrrolidones, subunits present in several alkaloids.

}, issn = {1523-7060}, doi = {10.1021/ol063012j}, author = {Kotkar, Shriram P. and Chavan, Vilas B. and Sudalai, Arumugam} } @article { ISI:000243163000068, title = {Oxy-methane reforming over high temperature stable NiCoMgCeOx and NiCoMgOx supported on zirconia-haffnia catalysts: accelerated sulfur deactivation and regeneration}, journal = {Catalysis Communications}, volume = {8}, number = {3}, year = {2007}, month = {MAR}, pages = {561-564}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

NiCoMgOx and NiCoMgCeOx on commercial low surface area zirconia-haffnia catalysts have unusually high thermal stability (\>= 2000 degrees C) for syngas generation via the methane partial oxidation process (J. Catal., 233, 36, 2005). Herein we report the results on accelerated sulfur deactivation (0.74 mol\% sulfur in feed) and corresponding regeneration (at 800 degrees C in 1:1 O-2 + N-2 flow) over these catalysts. The NiCoMgCeOx catalyst, due to a larger mobility of lattice oxygen, showed a considerably higher resistance to sulfur poisoning; the higher mobility of the lattice oxygen in case of the NiCoMgCeOx catalyst may be related to the presence of CeO2. During the deactivation process, the selectivity for H-2 was decreased to a much greater extent than that for CO. Regeneration studies showed that even after complete deactivation of the catalysts, the original activity/selectivity of both the catalysts could be completely restored after a simple regeneration process. Based on their exceptionally high thermal stability, high activity/selectivity and easily regenerability, the NiCoMOx, and NiCoMgCeOx catalysts appear to be very promising candidates for the CPOM process. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Deactivation, high temperature stable, methane, Partial oxidation, Regeneration, Sulfur}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.08.007}, author = {Choudhary, Vasant R. and Mondal, Kartick C. and Choudhary, Tushar V.} } @article { ISI:000242960400008, title = {Phosphotungstic acid as an efficient solid catalyst for intramolecular rearrangement of benzyl phenyl ether to 2-benzyl phenol}, journal = {Catalysis Communications}, volume = {8}, number = {2}, year = {2007}, month = {FEB}, pages = {139-144}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

An heteropoly acid (phosphotungstic acid, PTA) was found to be a promising solid acid catalyst as an alternative to the conventional stoichiometric reagents for the rearrangement of benzyl phenyl ether giving 2-benzyl phenol as a major product and 4-benzyl phenol and dibenzylated phenols as side products. Catalyst was recovered from the reaction mixture and reused again without loss of activity. Based on the observed product distribution for various substrates a plausible catalytic reaction pathway has also been proposed. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {benzyl phenyl ether, Intramolecular rearrangement, Phosphotungstic acid}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.05.046}, author = {Bhure, Mahesh H. and Rode, Chandrashekhar V. and Chikate, Rajeev C. and Patwardhan, Neeraj and Patil, Shraddha} } @article { ISI:000245141300053, title = {Photodegradation of ethylene/propylene/polar monomers, Co-, and terpolymers. II. prepared by Ni catalyst systems}, journal = {Journal of Applied Polymer Science}, volume = {104}, number = {3}, year = {2007}, month = {MAY}, pages = {1783-1791}, publisher = {WILEY-BLACKWELL}, type = {Article}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

The copolymers of ethylene/propylene as well as their terpolymers with polar monomers were prepared by Ni-catalyst systems and their photodegradation behavior was studied by Fourier transform infrared spectroscopy. The polar monomers used to synthesize co- and terpolymers of ethylene/propylene/polar monomer were 5-hexen-1-ol, 10-undecen-1-ol, acrylamide, methylmethacrylate, acrylonitrile, and methylvinyl ketone. The morphological changes of the irradiated samples were determined by scanning electron microscopy. The photodegradation kinetics has also been studied. The surface damage caused by polychromatic irradiation (lambda \>= 290 nm) at 55 degrees C in atmospheric air is presented in different micrographs. The rate of photo-oxidative degradation is very fast in terpolymers containing polar monomers as compared with copolymers and homopolymers. The morphological study of the photodegraded samples showed a very good correlation with the photodegraded results. (c) 2007 Wiley Periodicals, Inc.

}, keywords = {copolymerization, Ethylene, Photodegradation, polar monomers, propylene}, issn = {0021-8995}, doi = {10.1002/app.25828}, author = {Fernandes, Susete N. and Correia, Sandra and Matos, Ines and Marques, Maria M. and Rana, Sravendra and Kumar, Bijandra and Gupta, M. K. and Singh, R. P.} } @article { ISI:000244210600007, title = {Poly(o-ethylaniline) coatings for stainless steel protection}, journal = {Progress In Organic Coatings}, volume = {58}, number = {1}, year = {2007}, month = {JAN}, pages = {54-63}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The poly(o-ethylaniline) coatings were electrochemically synthesized on 304-stainless steel by using cyclic voltammetry from an aqueous salicylate medium. Cyclic voltammetry, UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-ethyaniline on 304-stainless steel. The performance of poly(o-ethylaniline) as protective coating against corrosion of 304-stainless steel in aqueous 3\% NaCl was evaluated by the open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The results of the potentiodynamic polarization and cyclic potentiodynamic polarization demonstrate that the poly(o-ethylaniline) coating provides excellent protection to both localized and general corrosion of 304-stainless steel. The corrosion potential was about 0.190 V more positive in aqueous 3\% NaCl for the poly(o-ethylaniline) coated steel than that of bare steel and reduces the corrosion rate of steel almost by a factor of 20. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Conducting polymer coatings, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, poly(o-ethylaniline) coatings, stainless steel}, issn = {0300-9440}, doi = {10.1016/j.porgcoat.2006.12.001}, author = {Chaudhari, Sudeshna and Sainkar, S. R. and Patil, P. P.} } @article { ISI:000244257400014, title = {Practical and facile approach towards indole alkaloids: (-)-mitralactonine}, journal = {Synlett}, number = {1}, year = {2007}, month = {JAN}, pages = {79-82}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

An efficient approach to (-)-mitralactonine using Pictet-Spengler cyclisation with a highly functionalised masked aldehyde is described. Sharpless asymmetric dihydroxylation (SAD) is utilised to introduce chirality in the key substrate.

}, keywords = {alkaloids, asymmetric, cyclisations, dihydroxylations, thioacetats}, issn = {0936-5214}, doi = {10.1055/s-2006-958434}, author = {Chavan, Subhash P. and Sharma, Pallavi and Sivappa, Rasapalli and Kalkote, Uttam R.} } @article { ISI:000249627100033, title = {Practical formal synthesis of camptothecin}, journal = {Tetrahedron Letter}, volume = {48}, number = {37}, year = {2007}, month = {SEP}, pages = {6561-6563}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The synthesis of the DE ring of camptothecin using simple and inexpensive starting materials, employing an addition elimination reaction and selective esterification of an aliphatic carboxylic acid as key steps is described. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {alkaloid, Anticancer, camptothecin, Natural product}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.07.017}, author = {Chavan, Subhash P. and Pathak, Ashok B. and Kalkote, Uttam R.} } @article { ISI:000252029800002, title = {Practical synthesis of (+/-)-venlafaxine}, journal = {Synthetic Communications}, volume = {37}, number = {22-24}, year = {2007}, month = {NOV}, pages = {3901-3906}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A practical total synthesis of antidepressant (+/-)-venlafaxine is disclosed.

}, keywords = {antidepressant, Grignard reaction, Michael addition}, issn = {0039-7911}, doi = {10.1080/00397910701572266}, author = {Chavan, Subhash P. and Khobragade, Dushant A. and Thakkar, Mahesh and Kalkote, Uttam R.} } @article { ISI:000251244900001, title = {Preface: CAMURE-6 \& ISMR-5 symposium in Pune, India}, journal = {Industrial \& Engineering Chemical Research}, volume = {46}, number = {25}, year = {2007}, month = {DEC}, pages = {8291}, publisher = {AMER CHEMICAL SOC}, type = {Article, Editorial Material}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, issn = {0888-5885}, doi = {10.1021/ie078009y}, author = {Chaudhari, Raghunath V. and Ranade, Vivek V.} } @article { ISI:000248145100016, title = {Preparation of enantiopure trans-1,2-cyclohexanediol and trans-2-aminocyclohexanol}, journal = {Synthetic Communications}, volume = {37}, number = {10}, year = {2007}, month = {MAY}, pages = {1727-1733}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Trans-1,2-cyclohexanediol and trans-2-aminocycloxexanol are useful chiral auxiliaries. Simple chemical resolution procedures for these molecules are presented.

}, keywords = {chemical resolution, chiral auxiliaries, epoxide-cleavage}, issn = {0039-7911}, doi = {10.1080/00397910701266075}, author = {Chatterjee, A. and Sasikumar, M. and Joshi, Navalkishore N.} } @article { ISI:000245563300037, title = {Protecting group directed ring-closing metathesis (RCM): the first total synthesis of an anti-malarial nonenolide}, journal = {Tetrahedron Letters}, volume = {48}, number = {14}, year = {2007}, month = {APR}, pages = {2621-2625}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The first synthesis of a newly found naturally occurring anti-malarial nonenolide is described. A pivotal step in the synthesis is the ring-closing metathesis of a dienoic ester prepared by coupling an acid and alcohol that were stereoselectively synthesized from (S)-alpha-hydroxy-gamma-butyrolactone and 1,2-O-isopropylidene D-glyceraldchyde, respectively. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {1, 2-O-isopropylidene, anti-malarial agent, D-glyceraldehyde, Nonenolide, Ring-closing metathesis, Yamaguchi esterification}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.02.040}, author = {Mohapatra, Debendra K. and Ramesh, Dhondi K. and Giardello, Michael A. and Chorghade, Mukund S. and Gurjar, Mukund K. and Grubbs, Robert H.} } @article { ISI:000242960400016, title = {Rate enhancement in palladium catalyzed Heck reactions by Lewis acid promoters}, journal = {Catalysis Communications}, volume = {8}, number = {2}, year = {2007}, month = {FEB}, pages = {183-186}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Significant enhancement in the rate of Heck reactions has been achieved when catalytic amounts of Lewis acid (like FeCl(3)) promoters in the presence of trace amounts of water (\> 2000 ppm) are used along with Pd complex catalysts. Experiments with different aryl halides, bases as well as olefins have been carried out to demonstrate the role of Lewis acid promoters. The increase in the reaction rates is due to the weakening of Ar-X bond by the Lewis acid in the manner similar to Friedel-Crafts reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Heck reaction, Lewis acid, Palladium, Promoters}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.05.043}, author = {Sud, Abhishek and Deshpande, Raj Madhukar and Chaudhari, Raghunath V.} } @article { ISI:000245961800014, title = {Reduction of oxygen by hydroxylammonium salt or hydroxylamine over supported Au nanoparticles for in situ generation of hydrogen peroxide in aqueous or non-aqueous medium}, journal = {Catalysis Communications}, volume = {8}, number = {5}, year = {2007}, month = {MAY}, pages = {811-816}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction of O-2 with hydroxylamine or its salts over a number of supported gold catalysts containing An nanoparticles (at 10-70 degrees C) has been studied at atmospheric pressure for the in situ generation of H2O2 (required for organic oxidation reactions in the synthesis of fine/specialty chemicals) in aqueous (water) or non-aqueous medium. Hydrogen peroxide in high yields with harmless by-products (viz. water and nitrogen) can be generated in situ by the reduction Of O-2 by hydroxylammonium sulfate (or chloride) or hydroxylamine using the supported gold catalysts particularly Au/Gd2O3, Au/La2O3 and Au/MgO, in aqueous (water) or non-aqueous (viz. methanol) medium at close to ambient conditions. The reduction of O-2 by hydroxylammonium salt to H2O2, however, requires preneutralization of the salt by alkali; in the absence of the neutralization, only water is formed in the reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Au Nanoparticles, Au/Gd2O3, Au/La2O3, Au/MgO, Hydrogen peroxide, hydroxylamine, hydroxylammonium salts, in situ H2O2 generation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.08.041}, author = {Choudhary, Vasant R. and Jana, Prabhas and Bhargava, Suresh Kumar} } @conference {42803, title = {Removal of AS(III) and AS (V) from contaminated water sources by sorption onto novel pei-attached poly(hipe) beads", paper presented at international conference on ?role of analytical chemistry in nuclear technology?}, booktitle = {Role of Analytical Chemistry in Nuclear Technology}, year = {2007}, month = {DEC}, address = {BARC, Mumbai, India}, author = {Ingavle, Ganesh C. and Tayal, Rajeev and Shaikh, Wasif Abdul Lateef and Chaudhari, Sanjeev and Chavan, Nayaku and Rajan, Chelanattukizhakkemadath Raman and Ponrathnam, Surendra} } @article { ISI:000245142600008, title = {Rh(II)-catalyzed intramolecular N-H insertion of D-glucose-derived delta-amino alpha-diazo beta-ketoester: Synthesis of pyrrolidine iminosugars}, journal = {Synlett}, number = {4}, year = {2007}, month = {MAR}, pages = {559-562}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The rhodium acetate catalyzed reaction of D-glucose-derived delta-amino alpha-diazo beta-ketoester allows a stereoselective beta-facial intramolecular N-H insertion reaction that leads to formation of the bicyclic pyrrolidinone ring skeleton in high yield. The sugar-substituted pyrrolidinone thus obtained was elaborated to allow the synthesis of promising glycosidase inhibitors, namely, 2,5-dideoxy2,5-imino-L-glycero-alpha-D-galactoheptitol and 2,5-dideoxy-2,5-imino-D-galactitol.

}, keywords = {alkaloids, azasugars, carbohydrates, N-H insertion, Pyrrolidines, rhodium carbenoid}, issn = {0936-5214}, doi = {10.1055/s-2007-970743}, author = {Vyavahare, Vinod P. and Chattopadhyay, Subrata and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article { ISI:000245500200046, title = {Scanning tunneling microscopy/spectroscopy on Au nanoparticles assembled using lauryl amine (LAM) and octadecane thiol (ODT)}, journal = {Applied Surface Science}, volume = {253}, number = {11}, year = {2007}, month = {MAR}, pages = {5109-5115}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In this report, we demonstrate scanning tunneling microscopy and spectroscopy on thin filins of lauryl amine (LAM) and octadecane thiol (ODT) protected gold nanoparticles. We show that the zero current in the I-V curves (measure of Coulomb blockade (CB) of the nanoparticles) depends on the properties of the spacer molecule. In both the cases the gap voltage and the tunneling current at which the images are obtained are quite different which is further confirmed from the fitting performed based on the orthodox theory. The values for the capacitance and charging energy obtained from the fitting for ODT capped particles are comparable to the values obtained using spherical capacitor model. In contrast, values of these parameters were found to differ for LAM capped nanoparticles. While imaging, ODT capped nanoparticles were observed to drag along the scan direction leading to ordering of particles. Images of LAM capped gold nanoparticles show local ordering in self-assembly of particles although no evidence of large scale ordering in spatial Fourier transform was seen. These observations suggest that nanoparticles with larger CB would be intaged nonevasively in contrast to small CB systems for which tip induced effects will be dominant. In both the systems the current was found to rise faster than theoretical curves based on the orthodox theory suggesting that mechanism of charge transfer in this case may involve field emission rather than tunneling through a rectangular barrier. An attempt has been made to explain charge transfer based on Fowler-Nordheim (F-N) plots of the I-V curves. (c) 2006 Elsevier B.V All rights reserved.

}, keywords = {Nanostructures, scanning tunneling microscopy (STM)}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2006.11.038}, author = {Datar, Suwarna and Chaudhary, Minakshi V. and Sastry, Murali and Dharmadhikari, C. V.} } @article { ISI:000252029800038, title = {Short and efficient synthesis of rubrolide E}, journal = {Synthetic Communications}, volume = {37}, number = {22-24}, year = {2007}, month = {DEC}, pages = {4253-4263}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Short and efficient synthesis of rubrolide E from commercially available 4-methoxyacetophenone, employing ring-closing metathesis, Knoevenagel condensation, and Reformatsky reactions, are the key steps are described.

}, keywords = {antibiotics, antitumor, Epoxide, Natural products, Total synthesis}, issn = {0039-7911}, doi = {10.1080/00397910701575665}, author = {Chavan, Subhash P. and Pathak, Ashok B. and Pandey, Ankur and Kalkote, Uttam R.} } @article { ISI:000250545100010, title = {Short and efficient synthetic strategy for the total syntheses of (S)-(+)- and (R)-(-)-Plakolide A}, journal = {European Journal of Organic Chemistry}, number = {30}, year = {2007}, month = {OCT}, pages = {5059-5063}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

Concise and efficient total syntheses of anticancer agents (S)(+)-Plakolide A and (R)-(-)-Plakolide A were accomplished in eight steps and an overall yield of 39 \% starting from geraniol. The key steps in our strategy are Sharpless asymmetric epoxidation, double elimination, and Stille coupling reactions.

}, keywords = {Cross-coupling, epoxidation, inhibitors, olefination}, issn = {1434-193X}, doi = {10.1002/ejoc.200700401}, author = {Mohapatra, Debendra K. and Pramanik, Chintnoy and Chorghade, Mukund S. and Gurjar, Mukund K.} } @article { ISI:000244666100011, title = {Solvent-free selective oxidation of benzyl alcohol by molecular oxygen over uranium oxide supported nano-gold catalyst for the production of chlorine-free benzaldehyde}, journal = {Green Chemistry}, volume = {9}, number = {3}, year = {2007}, month = {JAN}, pages = {267-272}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A detailed investigation on the production of chlorine-free benzaldehyde in the solvent-free oxidation of benzyl alcohol by O-2 over nano-gold supported on U3O8 has been carried out. Influence of different catalyst parameters (different methods of gold deposition on U3O8, gold loading and particle size, and catalyst calcination temperature) and reaction conditions (reaction period and temperature) on the process performance has been studied. The catalyst containing gold at higher concentration and with smaller gold particles showed the better process performance (higher benzyl alcohol conversion and benzaldehyde yield or selectivity). The benzyl alcohol conversion is largely increased but the selectivity for benzaldehyde is slightly decreased (while that of benzyl benzoate is increased) with increasing the reaction period or temperature. In the presence of solvent (viz. tolune, p-xylene, DMF or DMSO), the process performance was found to be inferior to that observed in the absence of any solvent. Substituted benzyl alcohols also can be oxidized by O-2 to corresponding aldehydes with high yield and/or selectivity, using the catalyst in the absence of any solvent.

}, issn = {1463-9262}, doi = {10.1039/b608304h}, author = {Choudhary, Vasant R. and Jha, Rani and Jana, Prabhas} } @article { ISI:000252091800019, title = {Stereoselective synthesis of spiro-beta-lactams using D-(+)-glucose derived chiral pool: remarkable influence of the torquoelectronic effect}, journal = {Tetrahedron}, volume = {63}, number = {37}, year = {2007}, month = {SEP}, pages = {9179-9187}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Diastereoselective synthesis of spiro-beta-lactams via [2+2] cycloaddition reaction of imines and chiral ketenes is described. The chiral ketene was prepared from commercially available, inexpensive D-glucose. Although, theoretically four diastereomers are possible, the reaction yielded only two diastereomers stereoselectively in good to moderate yields. The stereochemical outcome of the reaction was in accordance with the torquoelectronic model. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {imines, ketenes, spiro-beta-lactams, Staudinger reaction, stereoselective synthesis}, issn = {0040-4020}, doi = {10.1016/j.tet.2007.06.073}, author = {Chincholkar, Pinak M. and Puranik, Vedavati G. and Deshmukh, A. R. A. S.} } @article { ISI:000250026200022, title = {Supported copper oxide as a highly active/selective catalyst for the epoxidation of styrene by TBHP to styrene oxide}, journal = {Catalysis Communications}, volume = {8}, number = {10}, year = {2007}, month = {OCT}, pages = {1556-1560}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Liquid phase epoxidation of styrene by anhydrous and aqueous TBHP to styrene oxide has been studied under reflux, using different supported CuO (viz. Cuo/Si-MCM-41, CuO/Al2O3, CuO/Ga2O3 and CuO/In2O3) as easily separable and reusable heterogeneous catalysts. The CuO/Ga2O3 catalyst showed the best performance in the epoxidation by aqueous TBHP. The CuO supported on In2O3 or Si-MCM-41 also showed very good performance in the epoxidation but only by anhydrous TBHP. However, the CUO/SiO2 catalyst, however, showed very good performance in the epoxidation by both the anhydrous and aqueous TBHP. Influence of the reaction conditions (temperature, time and TBHP/styrene ratio) on the epoxidation by aqueous TBHP over the best catalyst (CuO/Ga2O3) has been investigated. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {CuO/Al2O3, CuO/Ga2O3, CuO/In2O3, Cuo/Si-MCM-41, CuO/SiO2, epoxidation, styrene, Styrene oxide, tertiary butyl hydroperoxide}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.01.005}, author = {Choudhary, Vasant R. and Jha, Rani and Chaudhari, Nitin K. and Jana, Prabhas} } @article { ISI:000245148800020, title = {Synergetic effect of two halogen promoters present in acidic reaction medium or catalyst on the H2O2 formation (in H-2-to-H2O2 oxidation) and destruction over Pd/C (or Al2O3) catalyst}, journal = {Journal of Catalysis}, volume = {246}, number = {2}, year = {2007}, month = {MAR}, pages = {434-439}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

A strong synergetic effect of two different halide anions (F- and I-, Cl- and I-, Cl- and Br-, and F- and Br-) at optimum concentration in the catalyst or in an acidic reaction medium was observed in the H-2-to-H2O2 oxidation over Pd/C, Pd/Al2O3, and halogenated Pd/Al2O3 catalysts. The synergetic effect promote, the net H2O2 formation by inhibiting the H2O2 decomposition and hydrogenation reactions. The effect is most pronounced for the combination of fluoride (or chloride) and iodide anions. The Br (1 wt\%)-F (1 wt\%)-Pd (5 wt\%)/Al2O3 catalyst showed very high H2O2 yield (59\%)/selectivity (60\%) in the H-2-to-H2O2 oxidation. (c) 2006 Elsevier Inc. All rights reserved.

}, keywords = {H-2-to-H2O2 oxidation, H2O2 decomposition H2O2 hydrogenation, halogen promoter, Hydrogen peroxide, Pd/Al2O3, Pd/C, synergetic effect}, issn = {0021-9517}, doi = {10.1016/j.jcat.2006.12.012}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000253154500023, title = {Syntheis of unusual tricyclic ring systems of biological interest}, journal = {Heterocycles}, volume = {73}, number = {1}, year = {2007}, month = {DEC}, pages = {269+}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We describe a new synthesis of tricyclic scaffolds that incorporate a fusion of triazole with 1,4-benzodiazepine utilizing intramolecular {\textquoteleft}{\textquoteleft}click{\textquoteright}{\textquoteright} chemistry.

}, keywords = {1, 2, 3-Triazole, 4-benzodiazepine, Click chemistry, nitrogen rich polycyclic hetero-system, privileged structure}, issn = {0385-5414}, author = {Mohapatra, Debendra K. and Maity, Pradip K. and Chorghade, Mukund S. and Gurjar, Mukund K.} } @article { ISI:000243695000025, title = {Synthesis and characterization of mesoporous carbon through inexpensive mesoporous silica as template}, journal = {Microporous and Mesoporous Materials}, volume = {98}, number = {1-3}, year = {2007}, month = {JAN}, pages = {189-199}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mesoporous silica materials have been synthesized through sol-gel reaction using inexpensive sodium silicate as source of silica and low cost hydroxy carboxylic acid compounds as templates/pore forming agents. The material measured surface area of 1014 m(2)/g, pore diameter of 65 angstrom and pore volume of 1.4 cc/g when parameters like time and temperature of synthesis along with mole ratio of TA/SiO(2) were optimized. Here TA stands for tartaric acid. Carbonization of sucrose inside the pores of above silica material at 900 degrees C followed by removal of silica framework using aqueous ethanoic solution of NaOH gave rise to mesoporous carbon material. The resulting materials were characterized by N(2)-sorption, FTIR spectroscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, thermal analysis and cyclic voltammetry. Three dimensional interconnecting wormhole channel arrangement of mesoporous silica template leads to mesoporous carbon replica with surface area of 1200 m(2)/g. X-ray photoelectron spectroscopic study (XPS) of the mesoporous carbon material shows the concentration of carbon atom in the range of 97-98\% with 1-2\% oxygen and negligible amount of silica. The electrochemical double layer capacitance behavior of carbon material with the specific capacitance value of 88.0 F/g at the scan rate of 1 mV/s appears to be promising. (C) 2006 Elsevier Inc. All rights reserved.

}, keywords = {Electrochemical properties, hydroxy carboxylic acid, mesoporous carbon, Mesoporous silica, sodium silicate}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2006.09.003}, author = {Karandikar, Prashant R. and Patil, K. R. and Mitra, A. and Kakade, Bhalchandra A. and Chandwadkar, Asha J.} } @proceedings { ISI:000291657600051, title = {Synthesis and characterization of value added catalysts zeolite beta using environmentally detrimental flyash}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {438-443}, publisher = {Elsevier Science BV}, address = {Beijing, Peoples R China}, abstract = {

Fly ash is a major byproduct of Thermal power plant, which makes a lot of pollution to the environment due to its fineness. When a large amount of fly ash is dumped in the places near to power plants, it mixes in all segment of environment like water, air as well as soil. Though it can be utilized for different useful purposes, due to the lack of technical knowledge about how and proper motivation, no progress has been made in its utilization. It has been demonstrated that the fly ash can be used for making a value added catalyst zeolite beta by using simple and low cost process. In the present paper it is demonstrated that the fly ash can be used as a source of silica and alumina in the synthesis of value added catalyst zeolite beta. Moreover, the influence of different silica sources such as tetraethylortho silicate, silica sol and fumed silica on the physiochemical characteristics of well crystallized zeolite beta was also studied. The detailed characterization was carried out by using powder XRD, (27)Al and (29)Si MAS NMR, chemical analysis and low temperature nitrogen adsorption. Based on the data obtained from various systems containing different silica source, fumed silica is found to be most efficient source materials and showed superiority in the uniformity of aluminum distribution and possesses higher surface area.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Kasture, M. W. and Bokade, Vijay V. and Joshi, P. N. and Kumar, R.}, editor = {Xu, R and Gao, Z. and Chen, J and Yan, W} } @article { ISI:000245634500005, title = {Synthesis and evaluation of 4/5-hydroxy-2,3-diaryl(substituted)-cyclopent-2-en-1-ones as cis-restricted analogues of combretastatin A-4 as novel anticancer agents}, journal = {Journal of Medicinal Chemistry}, volume = {50}, number = {8}, year = {2007}, month = {APR}, pages = {1744-1753}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A new series of 2,3-diaryl-4/5-hydroxy-cyclopent-2-en-1-one analogues replacing the cis double bond of combretastatin A-4 (CA-4) by 4/5-hydroxy cyclopentenone moieties was designed and synthesized. The analogues displayed potent cytotoxic activity (IC50 \< 1 mu g/mL) against a panel of human cancer cell lines and endothelial cells. The most potent analogues 11 and 42 belonging to the 5-hydroxy cyclopentenone class were further evaluated for their mechanism of action. Both of the analogues led to cell cycle arrest at G2/M phase and induced apoptosis in endothelial cells. Antitubulin property of 42 was superior to 11 and comparable to CA-4. The compound 42 had better aqueous solubility, metabolic stability, and pharmacokinetic profile than CA-4 and also demonstrated significant tumor regression in the human colon xenograft model. Our data suggests that cis-restricted analogues of CA-4 are a new class of molecules that have the potential to be developed as novel agents for the treatment of cancer.

}, issn = {0022-2623}, doi = {10.1021/jm060938o}, author = {Gurjar, Mukund K. and Wakharkar, Radhika D. and Singh, Anu T. and Jaggi, Manu and Borate, Hanumant B. and Shinde, Popat D. and Verma, Ritu and Rajendran, Praveen and Dutt, Sarjana and Singh, Gurvinder and Sanna, Vinod K. and Singh, Manoj K. and Srivastava, Sanjay K. and Mahajan, Vishal A. and Jadhav, Vinod H. and Dutta, Kakali and Krishnan, Karthik and Chaudhary, Anika and Agarwal, Shiv K. and Mukherjee, Rama and Burman, Anand C.} } @article { ISI:000250367600011, title = {Synthesis and glycosidase inhibitory studies of pentahydroxyindolizidines: D-Glucose-Derived aziridine-2-carboxylate approach}, journal = {European Journal of Organic Chemistry}, number = {29}, year = {2007}, month = {OCT}, pages = {4895-4901}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, abstract = {

D-Glucose -derived aziridine-2-carboxylate I was converted into a-amino aldehyde 7, which, after Wittig olefination, asymmetric dihydroxylation, hydrogenation followed by LiAlH4 reduction, and N-Cbz protection, afforded two diastereomeric pyrrolidines 11a and 11b with sugar appendages. Removal of the 1,2-acetonide functionality in 11a/11b and reductive animation gave the pentahydroxyindolizidine alkaloids 6g and 6h, respectively, with (S) absolute configurations at the ring junctions. The glycosidase inhibitory activities of these compounds were studied.

}, keywords = {asymmetric dihydroxylation (AD), Iminosugars, indolizidine, N-methylmorpholine, N-oxide (NNIO)}, issn = {1434-193X}, doi = {10.1002/ejoc.200700461}, author = {Kumar, K. S. Ajish and Chaudhari, Vinod D. and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article { ISI:000250557100030, title = {Synthesis of 1-deoxy-1-hydroxymethyl- and 1-deoxy-1-epi-hydroxymethyl castanospermine as new potential immunomodulating agents}, journal = {Journal of Medicinal Chemsitry}, volume = {50}, number = {22}, year = {2007}, month = {NOV}, pages = {5519-5523}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Two new C-1 epimeric hydroxymethyl castanospermine congeners 2a and 2b, synthesized by stereocon trolled intramolecular double reductive amination Of D-glucose derived beta-keto ester as a key step, showed impressive immuno-potentiating property. The bioactivity was mediated through up-regulation of T-H1/T-H2 cytokine ratio. The finding suggested that immunmodulatory activity of polyhydroxylated indolizidine alkaloids can be tuned by minor structural/stereochemical alterations.

}, issn = {0022-2623}, doi = {10.1021/jm070660f}, author = {Vyavahare, Vinod P. and Chakraborty, Chaitali and Maity, Biswanath and Chattopadhyay, Subrata and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article { ISI:000244678100004, title = {Synthesis of L-ido-configured six- and seven-membered carba-sugars}, journal = {Synthesis-Stuttgart}, number = {4}, year = {2007}, month = {FEB}, pages = {523-528}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

Ring-closing olefin metathesis has been successfully applied to the modular construction of L-ido-configured six- and seven-membered carba-sugars.

}, keywords = {allylations, carbocycles, carbohydrates, Metathesis, Radical reactions}, issn = {0039-7881}, doi = {10.1055/s-2007-965899}, author = {Ramana, C. V. and Chaudhuri, Siddhartha Ray and Gurjar, Mukund K.} } @article { ISI:000245142600010, title = {Synthesis of the C19-C34 segment of amphidinolide C}, journal = {Synlett}, number = {4}, year = {2007}, month = {MAR}, pages = {567-570}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The synthesis of the C19-C34 segment of amphidinolide C is described. The key steps include the Mioskowski{\textquoteright}s Lewis acid catalyzed epoxide opening with the alcohol, ring-closing metathesis, Wittig reaction, and Nozaki-Hiyama-Kishi coupling reaction.

}, keywords = {amphidinolide C, Cytotoxic, Nozaki-Hiyama-Kishi coupling, Ring-closing metathesis, Wittig reaction}, issn = {0936-5214}, doi = {10.1055/s-2007-967968}, author = {Mohapatra, Debendra K. and Rahaman, Hasibur and Chorghade, Mukund S. and Gurjar, Mukund K.} } @article { ISI:000250026200021, title = {Synthesis of tinidazole by condensation-oxidation sequence using MoO3/SiO2 bifunctional catalyst}, journal = {Catalysis Communications}, volume = {8}, number = {10}, year = {2007}, month = {OCT}, pages = {1550-1555}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Antimicrobial drug, tinidazole has been synthesized by condensation of 2-methyl,5-nitro-imidazole and 2-ethyl-thio-ethanol over MoO3/SiO2 catalyst to obtain 1-(2-ethyl-thio-ethanol)-2-methyl-5-nitro-imidazole which is further oxidized using hydrogen peroxide using the same MoO3/SiO2 catalyst to obtain tinidazole. MoO3/SiO2 catalyst (20\%), synthesized by sol-gel process showed the highest acid strength and was successfully demonstrated to catalyze both condensation and oxidation in the synthesis of tinidazole. Due to the bifunctional activity of the catalyst, the use of acetic acid for condensation step and tungstic acid or ammonium molybdate for oxidation step in the conventional synthesis of tinidazole could be eliminated, thus making it an environmentally benign process. The catalysts could be recycled five times without any appreciable loss in the conversion and selectivity showing the potential for. the use of MoO3/SiO2 as bifunctional catalyst for the production of this industrially important compound. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {antimicrobial drug, condensation, MoO3/SiO2, Oxidation, solid acid catalyst, tinidazole}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.01.001}, author = {Chandorkar, J. G. and Shubhangi B. Umbarkar and Rode, C. V. and Kotwal, V. B. and Dongare, Mohan K.} } @article {12}, title = {Synthesis, structure, and reactivity of diazoketiminato complexes of platinum(II) and palladium(II): cytotoxic properties of a platinum complex}, journal = {European Journal of Inorganic Chemistry}, volume = {7}, number = {27}, year = {2007}, note = {19th International Symposium on Chemical Reaction Engineering (ISCRE 19), Pottsdam, GERMANY, SEP, 2006}, month = {SEP}, pages = {4272-4281}, publisher = {BASF; Bayer AG; Cargill bvba; Clariant Produkte GmbH; Degussa AG; Schering AG; Siemens AG; SOLVAY GmbH; UHDE GmbH; UHDE Inventa Fischer GbbH}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{Reaction of the 2-(arylazo)anilines Ar-N = N-C6H4NH2 [

}, keywords = {CFD, hydro processing, scale-down, scale-up, trickle bed}, issn = {1528-7483}, doi = {10.1021/cg070194v}, author = {Pratihar, Jahar Lal and Shee, Biswaranjan and Pattanayak, Poulami and Patra, Debprasad and Bhattacharyya, Arindam and Puranik, Vedavati G. and Hung, C. H. and Chattopadhyay, Surajit} } @article {Manoj, title = {Tethered Pd-complex on solid support: catalyst for acid-free carbonylation reactions}, journal = {Catalysis Communictions}, volume = {8}, number = {9}, year = {2007}, month = {SEP}, pages = {1386-1392}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

{Palladium complex [

}, keywords = {decomposition, direct H2O2 synthesis, halides, Promoter}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.11.035}, author = {Sarkar, Bibbas R. and Mukhopadhyay, Kausik and Chaudhari, Raghunath V.} } @article { ISI:000250836500003, title = {Total synthesis of (+)-camptothecin via an intramolecular palladium-catalyzed cyclization strategy}, journal = {Synlett}, number = {17}, year = {2007}, month = {OCT}, pages = {2635-2638}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The novel cascade intramolecular Pd-catalyzed cyclization followed by aromatization for the construction Of D ring of (+)-camptothecin as a key step is demonstrated.

}, keywords = {alkaloids, antitumor, cyclizations, Natural products, Palladium}, issn = {0936-5214}, doi = {10.1055/s-2007-991054}, author = {Chavan, Subhash P. and Pathak, Ashok B. and Kalkote, Uttam R.} } @article { ISI:000247620500052, title = {Total synthesis of pulchellalactam via an RCM strategy}, journal = {Synthetic Communications}, volume = {37}, number = {7-9}, year = {2007}, month = {MAY}, pages = {1503-1510}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Total synthesis of (Z) pulchellalactam, a CD protein tyrosine phosphatase inhibitor, from commercially available methallyl chloride employing ring-closure metathesis (RCM) as a key step is described.

}, keywords = {alkaloid, Natural products, pulchellalactam, RCM, Total synthesis}, issn = {0039-7911}, doi = {10.1080/00397910701229131}, author = {Chavan, Subhash P. and Pathak, Ashok B. and Dhawane, Abasaheb N. and Kalkote, Uttam R.} } @conference { ISI:000291657600173, title = {Tungstophosphoric acid and zirconia supported on mesoporous silica catalyst in veratrole acetylation}, booktitle = {From ZEOLITES to Porous Mof Materials: The 40th Anniversary of International ZEOLITE Conference, Proceedings of The 15th International ZEOLITE Conference}, series = {Studies in Surface Science and Catalysis}, volume = {170}, year = {2007}, note = {15th International Zeolite Conference, Beijing, PEOPLES R CHINA, AUG 12-17, 2007}, month = {AUG}, pages = {1325-1330}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

Tungstophosphoric acid (TPA) over zirconia dispersed uniformly in mesoporous silica (MS) channels of MCM-41 and MCM-48 was synthesised and tested for its catalytic activity in veratrole acetylation. Catalysts with different TPA loadings (5 to 50 wt.\%) on 22.4 wt.\% ZrO(2)/MCM-41 and 15 wt.\% TPA on different zirconia loadings (10-70 wt.\%)/MCM-41 were prepared and calcined at 1123 K. Catalysts were characterised by known techniques. Mesoporous silica supports play an important role in stabilising catalytically active TPA along with tetragonal phase of zirconia. Among the catalysts, 15 wt.\% TPA/22.4 wt.\% ZrO(2)/MCM-41 calcined at 1123 K was found to have the highest acidity and be at least four times more active than neat 15 wt.\% TPA/ZrO(2) in veratrole acetylation to acetoveratrone by acetic anhydride.

}, isbn = {978-0-444-53068-4}, issn = {0167-2991}, author = {Halligudi, Shivaraj B.}, editor = {Xu, R. and Gao, Z. and Chen, J. and Yan, W.} } @article { ISI:000248609900029, title = {Use of poly(o-toluidine)/ZrO2 nanocomposite coatings for the corrosion protection of mild steel}, journal = {Journal of Applied Polymer Science}, volume = {106}, number = {1}, year = {2007}, month = {OCT}, pages = {220-229}, publisher = {JOHN WILEY \& SONS INC}, type = {Article}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

This study explored the possibility of using poly(o-toluidine) (POT)/ZrO2 nanocomposite coatings for the corrosion protection of mild steel in a chloride environment. POT/ZrO2 nanocomposite coatings were synthesized on steel substrates through an electrochemical route. These coatings were characterized with cyclic voltammetry, ultraviolet-visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. The performance of POT/ZrO2 nanocomposites as protective coatings against the corrosion of mild steel in aqueous 3 wt \% NaCl was evaluated with the potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results of this study demonstrate that POT/ZrO2 nanocomposite coatings provide better protection for mild steel against corrosion than pure POT coatings. The corrosion potential was about 0.312 V versus a saturated calomel electrode, more positive in aqueous 3 wt \% NaCl for the nanocomposite-coated steel than the uncoated steel, and the corrosion rate of steel was reduced by a factor of almost 51. (c) 2007 Wiley Periodicals, Inc.

}, keywords = {Coatings, conjugated polymers, FTIR, Nanocomposites, synthesis}, issn = {0021-8995}, doi = {10.1002/app.26469}, author = {Chaudhari, Sudeshna and Patil, P. P. and Mandale, A. B. and Patil, K. R. and Sainkar, S. R.} } @proceedings { ISI:000257623000146, title = {Blob-spring model for the dynamics of ring polymer in obstacle environment}, volume = {1027}, year = {2008}, note = {15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, Monterey, CA, AUG 03-08, 2008}, month = {AUG}, pages = {445-447}, publisher = {Soc Rheol}, address = {2 Huntington Quadrangle, STE 1no1, Melville, NY 11747-4501 USA}, abstract = {

The dynamical behavior of cyclic macromolecules in a fixed obstacle (FO) environment is very different than the behavior of linear chains in the same topological environment; while the latter relax by a snake-like reptational motion from their chain ends(1) the former can relax only by contour length fluctuations since they are endless.(2) Duke, Obukhov and Rubinstein proposed a scaling model (the DOR model) to interpret the dynamical scaling exponents shown by Monte Carlo simulations of rings in a FO environment.(2) We present a model (blob-spring model) to describe the dynamics of flexible and non-concatenated ring polymer in FO environment based on a theoretical formulation developed for the dynamics of an unentangled fractal polymer.(3) We argue that the perpetual evolution of ring perimeter by the motion of contour segments results in an extra frictional load. Our model predicts self-similar dynamics with scaling exponents for the molecular weight dependence of diffusion coefficient and relaxation times that are in agreement with the scaling model proposed by Obukhov et al.(2).

}, keywords = {fractal polymer dynamics, linear viscoelasticity, ring polymer dynamics}, isbn = {978-0-7354-0549-3}, issn = {0094-243X}, author = {Lele, Ashish K. and Iyer, Balaji V. S. and Juvekar, Vinay A.}, editor = {Co, A. and Leal, L. G. and Colby, R. H. and Giacomin, A. J.} } @article { ISI:000262796500004, title = {Characterization of MoSe2 thin film deposited at room temperature from solution phase}, journal = {Journal of Crystal Growth}, volume = {311}, number = {1}, year = {2008}, month = {DEC}, pages = {15-19}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A simple, low-temperature method has been developed to synthesis molybdenum diselenide semiconductor thin films, based on the chemical reaction of conlplexed ammonium molybdate, hydrazine hydrate and sodium Selenosulphate in aqueous alkaline medium. The deposition parameter of the MoSe2 thin film is interpreted in the present investigation. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), optical absorption and electrical measurements. The deposited film was found to be polycrystalline in hexagonal form. The direct band gap {\textquoteleft}E-g{\textquoteright} for the film was found to be 1.43eV and electrical conductivity in the order of 10(-2)(Omega cm)(-1) with n-type conduction mechanism. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Crystal morphology, Growth from solution, Inorganic compound, Polycrystalline deposition, Semiconducting materials, X-ray diffraction}, issn = {0022-0248}, doi = {10.1016/j.jcrysgro.2008.09.188}, author = {Hankare, P. P. and Patil, A. A. and Chate, P. A. and Garadkar, K. M. and Sathe, D. J. and Manikshete, A. H. and Mulla, Imtiaz S.} } @article { ISI:000252416000015, title = {Co : CdS diluted magnetic semiconductor nanoparticles: radiation synthesis, dopant-defect complex formation, and unexpected magnetism}, journal = {Chemistry of Materials}, volume = {20}, number = {2}, year = {2008}, month = {JAN}, pages = {440-446}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Incorporating a dopant into a nanoparticle is a nontrivial proposition in view of the size dependent surface versus bulk energy considerations and the intrinsic proximity of the surface to the interior, which facilitates migration to the surface. If realized and controlled, however, it can open up new avenues to novel nanomaterials. Some previous studies have shown the dopability of nanosystems but only with specific surface functionalization. Here, we demonstrate the successful dopant incorporation via a new route of pulsed high energy electron induced synthesis. We choose a system Co:CdS (dilutely cobalt doped cadmium sulfide) in view of the well-known application-worthy properties of CdS and the potential possibility of its conversion to a diluted magnetic semiconductor of interest to spintronics. By using various techniques, we show that matrix incorporation and uniform distribution of cobalt are realized in US nanocrystals without the need for additional chemical or physical manipulation. Optical and photoluminescence properties also support dopant incorporation. Interestingly, although magnetism is realized, it is weak, and it decreases at higher cobalt concentration. First principle density functional calculations are performed to understand this counterintuitive behavior. These calculations suggest that the introduction of parent cation or anion vacancies lead to magnetic moment reduction, albeit marginally. However, with some Co impurity fraction in the octahedral interstitial site inside the wurtzite cage, the magnetic moment drops down drastically. This study reveals that defect states may have an interesting role in dopant stabilization in nanosystems, with interesting system dependent consequences for the properties.

}, issn = {0897-4756}, doi = {10.1021/cm702118w}, author = {Bogle, Kashinath A. and Ghosh, Saurabh and Dhole, Sanjay D. and Bhoraskar, Vasant N. and Fu, Lian-feng and Chi, Miao-Fang and Browning, Nigel D. and Kundaliya, Darshan and Das, Gour P. and Ogale, Satishchandra B.} } @article { ISI:000259622100005, title = {Comparison of Metarhizium isolates for biocontrol of helicoverpa armigera (Lepidoptera : Noctuidae) in chickpea}, journal = {Biocontrol Science and Technology}, volume = {18}, number = {8}, year = {2008}, month = {FEB}, pages = {809-828}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Metarhizium isolates from soil (53) and insect hosts (10) were evaluated for extracellular production of cuticle degrading enzyme (CDE) activities such as chitinase, chitin deacetylase (CDA), chitosanase, protease and lipase. Regression analysis demonstrated the relation of CDE activities with Helicoverpa armigera mortality. On basis of this relation, ten isolates were selected for further evaluation. Subsequently, based on LT(50) of the 10 isolates towards H. armigera, five isolates were selected. Out of these five isolates, three were selected on the basis of higher conidia production (60-75 g/kg rice), faster sedimentation time (ST(50)) (2.3-2.65 h in 0.1\% (w/v) Tween 80) and lower LC(50) (1.4- 5.7 x 10(3) conidia/mL) against H. armigera. Finally, three Metarhizium isolates were selected for the molecular fingerprinting using ITS sequencing and RAPD patterning. All three isolates, M34412, M34311 and M81123, showed comparable RAPD patterns with a 935G primer. These were further evaluated for their field performance against H. armigera in a chickpea crop. The percent efficacies with the three Metarhizium isolates were from 65 to 72\%, which was comparable to the chemical insecticide, endosulfan (74\%).

}, keywords = {appressorium formation, chitin deacetylase, chitinase, chitosanase, Helicoverpa armigera, Lipase, Metarhizium anisopliae, Protease}, issn = {0958-3157}, doi = {10.1080/09583150802366475}, author = {Kulkarni, Shuklangi A. and Ghormade, Vandana and Kulkarni, Girish and Kapoor, Manisha and Chavan, Santosh B. and Rajendran, Armugam and Patil, Sanjay K. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000260728300004, title = {Cu-Ce mixed oxides supported on Al-pillared clay: effect of method of preparation on catalytic activity in the preferential oxidation of carbon monoxide}, journal = {Applied Catalysis B-Environmental}, volume = {84}, number = {1-2}, year = {2008}, month = {OCT}, pages = {21-29}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The possibility of using Al-pillared montmorillonite (Al-PILC) clay as a high-surface-area support for CuO-CeO2-based catalysts has been investigated. The preparation of the samples was done by three different methods, viz., amorphous citrate route (ACR), deposition precipitation (DP) and wet impregnation method (WIM). Samples with different CuO-CeO2 loadings (10-50 wt.\%) were prepared by each of the three methods. The catalytic activity of these samples was investigated for the preferential oxidation (PROX) of carbon monoxide (CO) in excess of H-2. The samples prepared by DP and WIM methods show better activity than the samples prepared by ACR method. At low Cu content, the samples prepared by DP method have a slight edge over samples prepared by WIM method. The DP-30 sample shows a very high CO conversion of 96.1\% at 423 K. A higher dispersion of CuO-CeO2 on pillared montmorillonite clay and better reducibility of copper oxide species may be responsible for the good activity of these samples even at lower reaction temperatures. A higher O-2/CO ratio increased the CO conversion but led to a reduction in oxidation selectivity. No methanation of CO or CO2 was observed at the reaction temperature. These CuO-CeO2/Al-PILC samples could be considered as comparable in performance with supported noble metal catalysts for the preferential oxidation of CO in excess hydrogen. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Alumina-pillared clay, Clay-supported CuO-CeO2, CuO-CeO2, PROX of CO}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2008.02.023}, author = {Ramaswamy, Veda and Malwadkar, Sachin S. and Chilukuri, Satyanarayana V.} } @article { ISI:000263686300008, title = {Dielectric relaxations in PVDF/BaTiO3 nanocomposites}, journal = {Express Polymer Letters}, volume = {2}, number = {4}, year = {2008}, month = {APR}, pages = {294-301}, publisher = {BUDAPEST UNIV TECHNOL \& ECON}, type = {Article}, address = {DEPT POLYMER ENG, MUEGYETEM RKP 3, BUDAPEST, H-1111, HUNGARY}, abstract = {

The present work aims at the study of molecular relaxations in PVDF/BaTiO3 nanocomposites using broadband dielectric spectroscopy. The nanocomposites of PVDF with BaTiO3 ( 10-30\% by wt\%) are prepared using simple melt mixing method. In dielectric permittivity study, two relaxation processes are identified corresponding to the crystalline, glass transition in the PVDF/BaTiO3 nanocomposites. The peaks shift to higher frequencies as the temperature is increased. Electric modulus formalism is used to analyze the dielectric relaxations to overcome the conductivity effects at low frequencies. In M {\textquoteleft}{\textquoteright} spectra two peaks are observed only at high temperature and low frequency whereas a single relaxation peak appears at low temperatures. The single relaxation peak appearing at low temperatures is the alpha(c) relaxation attributed to crystalline chain relaxation in PVDF and the second relaxation peak which appears only at high temperatures and at a frequency lower than alpha(c) relaxation is identified as MWS relaxation. The temperature dependence of alpha(c) relaxation and MWS relaxation follows Arrhenius type behavior.

}, keywords = {dielectric spectroscopy, Interfacial polarization, MWS relaxation, Nanocomposites}, issn = {1788-618X}, doi = {10.3144/expresspolymlett.2008.35}, author = {Chanmal, Chetan and Jog, Jyoti Prakash} } @article { ISI:000259412500020, title = {Direct H(2)-to-H(2)O(2) oxidation in aqueous acidic medium containing Br promoter over Pd/Al(2)O(3) and Pd/C catalysts thermally pretreated under different conditions}, journal = {Catalysis Letters}, volume = {125}, number = {3-4}, year = {2008}, month = {OCT}, pages = {296-301}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Influence of thermal pretreatments (under N(2), air or H(2) gas atmosphere at 500 degrees C or 700 degrees C) has been investigated for the Pd/Al(2)O(3) and Pd/Carbon catalysts in terms of its effect on their Pd particle size and performance in the H(2)-to-H(2)O(2) oxidation and H(2)O(2) destruction (by decomposition and/or hydrogenation) reactions in aqueous acidic medium containing Br promoter. The influence on the net H(2)O(2) formation is found to depend strongly upon the catalyst support due to support-Pd cluster interactions. For both the catalysts, the thermal treatments (except in air) caused a large increase in their Pd particle size. The increase in Pd particle size caused an increase in the H(2)O(2) formation activity of Pd/Al(2)O(3) but a decrease in the H(2)O(2) formation activity of Pd/C.

}, keywords = {Hydrogen peroxide, oxidation of H(2) to H(2)O(2), Pd/Al(2)O(3), Pd/C}, issn = {1011-372X}, doi = {10.1007/s10562-008-9482-9}, author = {Choudhary, Vasant R. and Jana, Prabhas and Bhargava, Suresh Kumar} } @article { ISI:000254979800018, title = {Direct oxidation of H-2 to H2O2 over different supported PdO catalysts in aqueous acidic medium: Influence of the reduction, calcination temperature and support of the catalyst on its net H2O2 formation activity}, journal = {Catalysis Communications}, volume = {9}, number = {7}, year = {2008}, month = {APR}, pages = {1624-1629}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Effects of the catalyst reduction (by hydrazine), calcination temperature (400-800 degrees C) and support (viz. Al2O3, SiO2, CeO2, ZrO2, HP or HM) on the performance of supported PdO (2.5 wt\%) catalyst in the H-2-to-H2O2 oxidation (with H-2:O-2 = 1: 1) in an aqueous acidic (0.1 M H3PO4) medium under ambient conditions have been investigated. All the supported PdO catalysts showed lower H2 conversion activity, but higher H2O2 selectivity, as compared to their reduced counter parts. The catalyst performance for the net H2O2 formation is strongly influenced by both the support and calcination temperature of the supported PdO catalysts. The catalysts calcined at 400 degrees C showed better performance. Among the catalysts, PdO/Al2O3 catalyst (calcined at 400 degrees C) showed the best performance (17.0\% H2O2 yield) in the H-2-to-H2O2 oxidation. The influence of the calcination temperature of PdO/Al2O3 catalyst on its H2O2 decomposition and hydrogenation activities has also been investigated. Both the H2O2 decomposition and hydrogenation activities increased with increasing the calcination temperature. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Hydrogen peroxide, oxidation of H-2 to H2O2, supported PdO catalysts}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.01.012}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000254794300007, title = {Direct oxidation of H-2 to H2O2 over Pd/CeO2 catalyst under ambient conditions: influence of halide ions}, journal = {Chemical Engineering Journal}, volume = {136}, number = {2-3}, year = {2008}, month = {MAR}, pages = {126-132}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Direct oxidation of H-2 by O-2 to H2O2 and decomposition/hydrogenation of H2O2 have been investigated over Pd/CeO2 catalyst in presence of different halide ions. All reactions were carried out in an aqueous acidic (0.03 M H3PO4) medium at room temperature (25 degrees C) and atmospheric pressure. When different halide ions were added directly to the reaction medium or incorporated in the catalyst, the activity/selectivity of Pd/CeO2 catalyst in the H-2 to H2O2 oxidation changed significantly, depending upon the nature of the halide ions. Different ammonium halides impregnated reduced Pd/CeO2 catalyst calcined under inert (flowing nitrogen) and oxidizing (static/flowing air) gaseous atmospheres revealed that bulk oxidation state of Pd and the nature of the halide ions incorporated into the catalyst cooperatively control the activity/selectivity of catalyst in H-2 to H2O2 oxidation. Both H2O2 decomposition and hydrogenation were found to affect strongly depending upon the nature of the halide ions present in the reaction medium or in the catalyst. Among the different halides, bromide was found the most effective promoter for enhancing the H2O2 yield/selectivity in H-2 to H2O2 oxidation, irrespective of the Pd oxidation state in the catalyst. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Br- ions, H-2 to H2O2 oxidation, H2O2 decomposition, H2O2 hydrogenation, Pd/CeO2 catalyst}, issn = {1385-8947}, doi = {10.1016/j.cej.2007.03.016}, author = {Samanta, Chanchal and Choudhary, Vasant R.} } @article { ISI:000259104700018, title = {Direct oxidation of H-2 to H2O2 over PdO/Al2O3 catalysts in aqueous acidic medium: influence on H2O2 formation of Pd loading, calcination temperature and reduction of catalyst and presence of halide anions}, journal = {Catalysis Communications}, volume = {9}, number = {14}, year = {2008}, month = {AUG}, pages = {2371-2375}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Effects of the Pd loading (0.2-10 wt\%), calcination temperature (400-900 degrees C) and reduction of PdO/Al2O3 on its performance in the H-2-to-H2O2 oxidation (with H-2/O-2 = 1:1) in an aqueous 0.1 M H3PO4 medium, in the absence and presence of different halide anions, under ambient conditions have been investigated. The effect of calcination temperature on the H2O2 formation varied depending upon the Pd loading. The influence of the different halide anions was found to depend strongly on the nature of halide anion (F-, Cl-, Br- or I-) and the oxidation state of Pd and its loading in the catalyst. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {halide catalyst promoters, Hydrogen peroxide, oxidation of H-2 to H2O2, Pd/Al2O3, PdO/Al2O3}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.05.034}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000255689100002, title = {Effect of repeated in vitro sub-culturing on the virulence of metarhizium anisopliae against helicoverpa armigera (Lepidoptera : Noctuidae)}, journal = {Biocontrol Science and Technology}, volume = {18}, number = {4}, year = {2008}, month = {MAY}, pages = {337-355}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

The effect of repeated conidial sub-culturing of Metarhizium anisopliae on its virulence against Helicoverpa armigera (Hbner) was studied. The LT(50) observed against third instar larvae of H. armigera for the first sub-culture was 3.4 days; it increased to 4.5 and 5.6 days for the 20th and the 40th sub-cultures, respectively. The LT50 values after passage of the 40th sub-culture on H. armigera decreased to 4.4 and 3.7 days for the 40th (first in vivo) and the 40th (fifth in vivo) passages, respectively. Similarly, the LC(50) of M. anisopliae towards third instar larvae of H. armigera increased from the first sub-culture (0.17x10(4)) to (3.0x10(4)) for the 40th conidial transfers on potato dextrose agar and again decreased to 0.74x10(4) and 0.23x10(4) in the 40th (first in vivo) and the 40th (fifth in vivo) passage, respectively. Similar trends for LC(50) and LT(50) values were seen when sugarcane woolly aphid, Ceratovacuna lanigera Zehntner was used as a host. Significant variation in appressorium formation and cuticle-degrading enzyme production such as chitinase, chitin deacetylase, chitosanase and protease during subsequent sub-culturing and passage through H. armigera was observed. Though there was no effect on internal transcribed spacer (ITS) sequence pattern, interestingly, in randomly amplified polymorphic DNA (RAPD), significant differences in the band intensities and in the banding pattern for different sub-cultures of M. anisopliae were observed. As stable virulence towards the insect pest is desirable for commercialisation of a mycoinsecticide, such changes in virulence due to repeated in vitro transfer need to be monitored and minimised.

}, keywords = {appressorium formation, chitin deacetylase, chitinase, Helicoverpa armigera, in vitro sub-culturing, Lipase, Metarhizium anisopliae, Protease}, issn = {0958-3157}, doi = {10.1080/09583150801935650}, author = {Nahar, Pallavi B. and Kulkarni, Shuklangi A. and Kulye, Mahesh S. and Chavan, Santosh B. and Kulkarni, Girish and Rajendran, Armugham and Yadav, Priya D. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000253594300007, title = {Energy-efficient syngas production through, catalytic oxy-methane reforming reactions}, journal = {Angewandte Chemie-International Edition}, volume = {47}, number = {10}, year = {2008}, month = {JAN}, pages = {1828-1847}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY}, keywords = {fuels, heterogeneous catalysis, methane activation, Partial oxidation, Syngas}, issn = {1433-7851}, doi = {10.1002/anie.200701237}, author = {Choudhary, Tushar V. and Choudhary, Vasant R.} } @article { ISI:000253366100013, title = {Factors influencing the in situ generation of hydrogen peroxide from the reduction of oxygen by hydroxylamine from hydroxylammonium sulfate over Pd/alumina}, journal = {Applied Catalysis A-General}, volume = {335}, number = {1}, year = {2008}, month = {FEB}, pages = {95-102}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Influence of the concentration of bromide (KBr) promoter, reaction period, temperature, catalyst loading and initial concentration of hydroxylammonium sulfate on the formation of H2O2 due to the reaction between hydroxylamine from the hydroxylammonium salt and molecular oxygen over Pd (1 wt\%)/Al2O3 catalyst in a neutral aqueous medium at close to the ambient conditions has been investigated. Effect of pH and temperature on the destruction of H2O2, Occurring in the consecutive reactions, over the catalyst in the presence or absence of bromide promoter and hydroxylamine has also been studied. In the absence of O-2, the conversion of hydroxylamine by its decomposition over the catalyst increases sharply with increasing the pH, particularly above the pH of 7.0; at or below the pH of 7.0, it is quite small. The H2O2 destruction increases markedly with increasing the pH of medium and reaction temperature but it is found to decrease in the presence of hydroxylamine. For the highest net H2O2 formation, not only the optimum pH (7.0) of reaction medium but also the optimum other reaction conditions (viz. bromide promoter concentration, reaction period, temperature or catalyst loading) are necessary. The reaction path and mechanism for the generation of H2O2 have also been suggested. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {H2O2 destruction, Hydrogen peroxide, hydroxylamine, Hydroxylammonium sulfate, Pd/Al2O3 catalyst, reduction of O-2}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.11.015}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000260776600007, title = {Functionalization of single-walled carbon nanotubes with azides derived from amino acids using click chemistry}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {8}, number = {7}, year = {2008}, month = {JUL}, pages = {3351-3356}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Single-walled carbon nanotubes (SWCNTs) were chemically functionalized with amino acid-based moieties. The covalent functionalization of alkyne-derived SWCNTs with well defined azides derived from amino acids was accomplished through Cu(I)-catalyzed Huisgen [3+2] dipolar cycloaddition click chemistry. Transmission electron microscopy, Raman spectroscopy, and infrared spectroscopic measurements confirmed the functionalization of SWCNTs by organic molecules derived from amino acids, and the resulting material showed some good solubility in the organic solvents such as tetrahydrofuran, CH2Cl2, and CHCl3.

}, keywords = {Amino acids, Carbon nanotubes, Click chemistry, Functionalization}, issn = {1533-4880}, doi = {10.1166/jnn.2008.109}, author = {Kumar, Indresh and Rana, Sravendra and Rode, Chandrashakher V. and Cho, Jae Whan} } @article { ISI:000253961400025, title = {GaAlCl(x)-grafted Mont.K-10 clay: highly active and stable solid catalyst for the friedel-crafts type benzylation and acylation reactions}, journal = {Catalysis Communications}, volume = {9}, number = {6}, year = {2008}, month = {MAR}, pages = {1101-1105}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A liquid phase reaction of anhydrous GaCl(3) and AlCl(3) with the surface hydroxyl groups (with HCl evolution) of Mont. K-10 clay in dry CCL(4) under reflux resulted in a novel GaAlCl(x),-grafted Mont.K-10 catalyst [with Cl/(Ga + Al) = 1]. The catalyst showed high activity and stability in the Freidel-Crafts type benzylation and benzoylation (by benzyl chloride and benzoyl chloride, respectively) of benzene, naphthalene and substituted benzenes, even in the presence of moisture. It also showed good activity for the benzoylation of nitrobenzene (i.e. even in the presence of strong electron withdrawing group, like nitro group, attached to the benzene ring). The catalytically active surface species in the catalyst are -(O)(2)-Ga(or Al)Cl. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {benzoylation of aromatics, benzylation of aromatics, GaAlCl(x)-grafted Mont.K-10}, issn = {1566-7367}, doi = {10.1016/j.catcom.2007.10.014}, author = {Choudhary, Vasant R. and Jha, Rani} } @conference { ISI:000257623000188, title = {Gelation of regenerated fibroin solution}, booktitle = {15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology}, series = {AIP CONFERENCE PROCEEDINGS}, volume = {1027}, year = {2008}, note = {15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, Monterey, CA, AUG 03-08, 2008}, month = {AUG}, pages = {573-575}, publisher = {Amer Inst Physics, 2 Huntington Quadrangle, STE 1NO1, Melville, NY 11747-4501 USA}, organization = {Amer Inst Physics, 2 Huntington Quadrangle, STE 1NO1, Melville, NY 11747-4501 USA}, address = {Monterey, CA.}, abstract = {

Silk fibroin is a high molecular weight multiblock ampiphillic protein known for its ability to form high strength fibers. It is also biocompatible; silk sutures have been traditionally used for many centuries. Recently, there has been much interest in making silk hydrogels for applications ranging from tissue engineering to controlled delivery. Fibroin gels can be formed from aqueous solutions by changing one or more state variables such as pH, temperature and ionic strength. In this work we present our investigations on the gelation of aqueous fibroin solutions derived from Bombyx Mori silk using light scattering, confocal microscopy and rheological techniques.

}, keywords = {dynamic light scattering, Rheology, silk fibroin gel}, isbn = {978-0-7354-0549-3}, issn = {0094-243X}, author = {Nagarkara, Shailesh and Lele, Ashish K. and Chassenieux, Christophe and Nicolai, Taco and Durand, Dominique}, editor = {Co, A. and Leal, L. G. and Colby, R. H. and Giacomin, A. J.} } @article { ISI:000253042300017, title = {Highly efficient sulfimidation of 1,3-dithianes by Cu(I) complexes}, journal = {Synthetic Communications}, volume = {38}, number = {4}, year = {2008}, month = {FEB}, pages = {619-625}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A series of four Cu(I) complexes were tested for sulfimidation of 1,3-dithianes in the presence of [N-(p-tolysulfonyl)imino]phenyliodinane (PhI = NTs) as the nitrene-transfer agent. Cu(TMPhen)(PPh3)Br is an efficient catalyst with more than 90\% yield of the corresponding product with less reaction time as compared to the literature copper(I) complexes.

}, keywords = {1, 3-dithianes, Cu(I) complexes, PhI = NTs, sulfimidation}, issn = {0039-7911}, doi = {10.1080/00397910701798200}, author = {Giribabu, Lingamallu and Singh, Surya P. and Patil, Nandkumar M. and Kantam, M. Lakshmi and Gupte, Sunil P. and Chaudhari, Raghunath V.} } @article { ISI:000258433400008, title = {Highly selective approach for the total synthesis of (+)-heliconol A}, journal = {Tetrahedron-Asymmetry}, volume = {19}, number = {13}, year = {2008}, month = {JUL}, pages = {1568-1571}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The total synthesis of heliconol A, a representative of a new class of polyketide-derived hemiketals containing a reduced furanocyclopentane unit, has been achieved via the stereoselective reduction of a ketone, the face selective dihydroxylation, a Sonogashira coupling reaction, and a cis-selective reduction as the key steps. (C) 2008 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2008.05.031}, author = {Mohapatra, Debendra K. and Chatterjee, Bhaskar and Gurjar, Mukund K.} } @article { ISI:000254979800023, title = {Highly selective synthesis of mono-ethylene glycol phenyl ethers via hydroxyalkoxylation of phenols by cyclic carbonates using large pore zeolites}, journal = {Catalysis Communications}, volume = {9}, number = {7}, year = {2008}, month = {APR}, pages = {1649-1655}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydroxyalkoxylation of phenols by cyclic carbonates catalyzed by alkali loaded large pore zeolites has been reported. The study shows that KL type zeolite was recyclable and selective in producing mono-ethylene glycol pheryl ethers in similar to 98.5\% yield. Various substituted simple phenols were converted into mono-ethylene glycol ether of phenols with over 90\% yields, except 3-bromo and 2-methyl phenols. Mono hydroxyl plienols such as hydroquinone, biphenol and BPA (2,2-bis(4-hydroxyphenyl)propane) also produce corresponding mono- and di-ethylene glycol ethers. The ratio of ethylene carbonate to phenol was found to be critical for selective formation of monoethylene glycol phenyl ether of phenols. A ratio of two results in formation of appreciable amount of diether derivative viz., 2-(2-phenoxyethoxy) ethanol. Compared to ethylene carbonate, a lower reactivity of 1,2-propane carbonate was found for hydroxyalkoxylation of phenol. It was found that ring opening at less hindered methylene carbon of 1,2-propylene carbonate prevailed giving rise to selective formation of beta-hydroxy phenyl ethers. The reactivity of ethylene carbonate towards O-alkylation versus transesterification of phenol has been explained on the basis of HSAB concept. Finally, it has been shown that yield of mono-ethylene glycol phenyl ether is controlled both by basicity and channel architecture of zeolite structure. KL zeolite was found to be the most effective zeolite because of it{\textquoteright}s intermediate basicity and one dimensional channel architect. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {cyclic carbonate, ethylene glycol phenyl ether, hydroxyalkoxylation, phenol}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.01.019}, author = {Kinage, Anil K. and Gupte, Sunil P. and Chaturvedi, Rajiv K. and Chaudhari, Raghunath V.} } @article { ISI:000252529400025, title = {Incorporation of zirconium in medium-pore aluminophosphate molecular sieves with AEL framework}, journal = {Microporous and Mesoporous Materials}, volume = {108}, number = {1-3}, year = {2008}, month = {FEB}, pages = {223-229}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Zirconium incorporated alurninophosphate molecular sieves ZrAPO-11 was synthesized by hydrothermal method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy, thermogravimetric/differential thermal analysis (TGA/DTA), diffuse reflectance UV-visible spectroscopy, magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy (P-31 and Al-27). The acidity of the materials were determined by temperature programmed desorption (TPD) of ammonia. X-ray diffraction and scanning electron microscopy reveals formation of crystalline material in pure phase. Thermal analysis shows higher template content in zirconium containing samples than the corresponding AlPOs. MAS NMR suggests incorporation of zirconium in the framework. TPD reveals that the ZrAPO-11 samples were of higher acidity than AIPO(4)-11 (c) 2007 Elsevier Inc. All rights reserved.

}, keywords = {AlPO4-11, Aluminophosphate, catalysis, Molecular sieve, ZrAPO-11}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2007.03.044}, author = {Ganguli, J. N. and Chakrabortty, Dhruba and Satyanarayana, C. V. V.} } @article { ISI:000262395200001, title = {Influence of alkali metal doping on surface properties and catalytic activity/selectivity of CaO catalysts in oxidative coupling of methane}, journal = {Journal of Natural Gas Chemistry}, volume = {17}, number = {4}, year = {2008}, month = {DEC}, pages = {313-320}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Surface properties viz. surface area, basicity/base strength distribution, and crystal phases) of alkali metal doped CaO (alkali metal/Ca = 0.1 and 0.4) catalysts and their catalytic activity/selectivity ill oxidative coupling of methane (OCM) to higher hydrocarbons at different reaction conditions (viz. temperature. 700 and 750 degrees C: CH(4)/O(2) ratio. 4.0 and 8.0 and space velocity. 5140-20550 cm(3). g(-1).h(-1)) have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties (viz. surface area, basicity/base strength distribution) and catalytic activity/selectivity of the alkali metal doped CaO Catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali Metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity (strong basic sites) and the C(2+) Selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts. Na-CaO (Na/Ca = 0.1. before calcination) catalyst (calcined at 750 degrees C), showed best performance (C(2+) selectivity of 68.8\% with 24.7\% methane conversion), whereas (lie poorest performance was shown by the Rb-Cao Catalyst in the OCM process.

}, keywords = {alkali metal doped CaO catalysts, basicity/base strength distribution, catalytic activity/selectivity, oxidative coupling of methane}, issn = {1003-9953}, author = {Rane, V. H. and Chaudhari, Sopan T. and Choudhary, Vasant R.} } @article {43246, title = {Introduction to the density matrix renormalization group ansatz in quantum chemistry}, journal = {Frontiers in Quantum Systems in Chemistry and Physics}, volume = {18}, year = {2008}, month = {JAN}, pages = {49-65}, type = {Proceedings Paper}, abstract = {The Density Matrix Renormalisation Group (DMRG) is an electronic structure method that has recently been applied to ab-initio quantum chemistry. Even at this early stage, it has enabled the solution of many problems that would previously have been intractable with any other method, in particular, multireference problems with very large active spaces. Historically, the DMRG was not originally formulated from a wavefunction perspective, but rather in a Renormalisation Group (RG) language. However, it is now realised that a wavefunction view of the DMRG provides a more convenient, and in some cases more powerful, paradigm. Here we provide an expository introduction to the DMRG ansatz in the context of quantum chemistry.}, author = {Chan, Garnet Kin-Lic and Dorando, Jonathan J. and Ghosh, Debashree and Hachmann, Johannes and Neuscamman, Eric and Wang, Haitao and Yanai, Takeshi} } @article { ISI:000253521600009, title = {Iron-nickel bimetallic nanoparticles for reductive degradation of azo dye orange G in aqueous solution}, journal = {Applied Catalysis B-Environmental}, volume = {79}, number = {3}, year = {2008}, month = {MAR}, pages = {270-278}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The degradation of Orange G, a monoazo dye, in aqueous solutions was investigated using Fe-Ni bimetallic nanoparticles. Transmission electron microscopy (TEM) of as-synthesized nanoparticles showed the presence of spherical particles having a size of 20-40 nm. X-ray photoelectron spectroscopy (XPS) did not detect the presence of nickel on the nanoparticle surface, which suggested a uniform distribution of both metals inside the particle core. Batch experiments with a minimum nanocatalyst loading of 3 g/L showed complete dye degradation after 10 min of reaction time. The degradation efficiency was linearly dependent on the initial dye concentration, pH of the solution and total Fe-Ni catalyst concentration. The efficiency increased with increasing Fe-Ni concentration and decreasing pH of the solution, but decreased with an increase in the dye concentration. The degradation rate followed first order reaction kinetics with respect to the dye concentration. High performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of the degradation products revealed that the degradation mechanism proceeds through a reductive cleavage of the azo linkage resulting in the formation of aniline and surface-adsorbed naphthol amine derivatives. The latter are subsequently hydroxylated through an oxidative process. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Azo Dye, Degradation, iron, Nanoparticles, Nickel}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2007.10.033}, author = {Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000255706500009, title = {Liquid-phase synthesized mesoporous electrochemical supercapacitors of nickel hydroxide}, journal = {Electrochimica Acta}, volume = {53}, number = {15}, year = {2008}, month = {JUN}, pages = {5016-5021}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Electrochemical supercapacitive (ES) properties of liquid-phase synthesized mesoporous (pore size distribution centered similar to 12 nm) and of 120 m(2)/g surface area nickel hydroxide film electrodes onto tin-doped indium oxide substrate are discussed. The amounts of inner and outer charges are calculated to investigate the contribution of mesoporous structure on charge storage where relatively higher contribution of inner charge infers good ion diffusion into matrix of nickel hydroxide. Effect of different electrolytes, electrolyte concentrations, deposit mass and scan rates on the current-voltage profile in terms of the shape and enclosed area is investigated. Specific capacitance of similar to 85 F/g at a constant current density of 0.03 A/g is obtained from the discharge curve. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {electrochemical supercapacitors, mesoporous structure, nickel hydroxide}, issn = {0013-4686}, doi = {10.1016/j.electacta.2008.01.100}, author = {Chang, Jinho and Park, Mira and Ham, Dukho and Ogale, S. B. and Mane, Rajaram S. and Han, Sung-Hwan} } @article { ISI:000254543000039, title = {Local electronic structure and magnetic properties of LaMn(0.5)Co(0.5)O(3) studied by x-ray absorption and magnetic circular dichroism spectroscopy}, journal = {Physical Review B}, volume = {77}, number = {12}, year = {2008}, month = {MAR}, pages = {125124}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We have studied the local electronic structure of LaMn(0.5)Co(0.5)O(3) using soft-x-ray absorption spectroscopy at the Co-L(3,2) and Mn-L(3,2) edges. We found a high-spin Co(2+)-Mn(4+) valence state for samples with the optimal Curie temperature. We discovered that samples with lower Curie temperatures contain low-spin nonmagnetic Co(3+) ions. Using soft-x-ray magnetic circular dichroism, we established that the Co(2+) and Mn(4+) ions are ferromagnetically aligned. We also revealed that the Co(2+) ions have a large orbital moment: morb/mspin approximate to 0.47. Together with model calculations, this suggests the presence of a large magnetocrystalline anisotropy in the material and predicts a nontrivial temperature dependence for the magnetic susceptibility.

}, issn = {1098-0121}, doi = {10.1103/PhysRevB.77.125124}, author = {Burnus, T. and Hu, Z. and Hsieh, H. H. and Joly, V. L. Joseph and Joy, Pattayil Alias and Haverkort, M. W. and Wu, Hua and Tanaka, A. and Lin, H. -J. and Chen, C. T. and Tjeng, L. H.} } @article { ISI:000259602400109, title = {Manufacturing of tinidazole by recovering and recycling catalyst}, journal = {Asian Journal of Chemistry}, volume = {20}, number = {4}, year = {2008}, month = {APR}, pages = {3289-3291}, publisher = {ASIAN JOURNAL OF CHEMISTRY}, address = {11/100 RAJENDRA NAGAR, SECTOR 3,, SAHIBABAD 201 005, GHAZIABAD, INDIA}, abstract = {

In this paper, the recycle process of tungstic acid by recovering it from waste during the manufacture of tinidazole is described. The recovered tungstic acid gives desired quality and quantity of tinidazole.

}, keywords = {Recovery, tinidazole, tungstic acid}, issn = {0970-7077}, author = {Dongare, Mohan K. and Chandorkar, J. G. and Rode, C. V.} } @article { ISI:000258965100011, title = {Mossbauer spectroscopic investigations of nanophase iron oxides synthesized by thermal plasma route}, journal = {Materials Characterization}, volume = {59}, number = {9}, year = {2008}, month = {SEP}, pages = {1215-1220}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Magnetic nanoparticles of iron oxide were synthesized by transferred arc plasma induced gas phase condensation method. Structural, morphological and magnetic studies of the as synthesized powder were carried out using X-ray diffraction, transmission electron microscopy and Mossbauer spectroscopy. These studies have revealed the simultaneous nucleation and condensation of different magnetic phases with a broad size distribution of the nanoparticles which is peaked at 30-50 nm and ranges from 10 nm to 80 nm. 57 Fe Mossbauer spectra recorded at various temperatures (5 K-300 K) in presence of external magnetic field (at 5 K) have suggested the presence of different phases of iron oxide with sizable amounts of gamma-Fe2O3 and alpha-Fe2O3 in addition to Fe3O4. The relative concentrations of these phases have been obtained by a self consistent spectral area analysis and were found to be 44:22:34 (\%). (C) 2007 Elsevier Inc. All rights reserved.

}, keywords = {iron oxides, Mossbauer spectroscopy, phase analysis, plasma synthesis}, issn = {1044-5803}, doi = {10.1016/j.matchar.2007.10.003}, author = {Nagar, Harshada and Kulkarni, Naveen V. and Karmakar, Soumen and Sahoo, B. and Banerjee, Indrani and Chaudhari, P. S. and Pasricha, R. and Das, A. K. and Bhoraskar, S. V. and Date, Sadgopal K. and Keune, W.} } @article { ISI:000260397500006, title = {NaIO4-KI-NaN3 as a new reagent system for C-H functionalization in hydrocarbons}, journal = {Tetrahedron Letters}, volume = {49}, number = {45}, year = {2008}, month = {NOV}, pages = {6401-6403}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The NaIO4-KI-NaN3 combination has been found to be an efficient, reliable, and inexpensive reagent system for mono- and 1,2-difunctionalization of hydrocarbons via C-H bond activation to afford vicinal azido- and acetoxy iodinations of cyclic hydrocarbons. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {azides, C-H activation, Iodination, NaIO4}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.08.071}, author = {Chouthaiwale, Pandurang V. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000260944500007, title = {Nano-gold supported on Fe2O3: a highly active catalyst for low temperature oxidative destruction of methane green house gas from exhaust/waste gases}, journal = {Applied Catalysis A-General}, volume = {350}, number = {2}, year = {2008}, month = {NOV}, pages = {186-190}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A number of nano-gold catalysts were prepared by depositing gold on different metal oxides (viz. Fe2O3, Al2O3, Co3O4, MnO2, CeO2, MgO, Ga2O3 and TiO2), using the homogeneous deposition precipitation (HDP) technique. The catalysts were evaluated for their performance in the combustion of methane (1 mol\% in air) at different temperatures (300-600 degrees C) for a GHSV of 51,000 h(-1). The supported nano-gold catalysts have been characterized for their gold loading (by ICP) and gold particle size (by TEM/HRTEM or XRD peak broadening). Among these nano-gold catalysts, the Au/Fe2O3 (Au loading = 6.1\% and Au particle size = 8.5 nm) showed excellent performance. For this catalyst, temperature required for half the methane combustion was 387 degrees C, which is lower than that required for Pd(1\%)/Al2O3 (400 degrees C) and Pt(1\%)/Al2O3 (500 degrees C) under identical conditions. A detailed investigation on the influence of space velocity (GHSV = 10,000-100,000 cm(3) g(-1) h(-1)) at different temperatures (200-600 degrees C) on the oxidative destruction of methane over the Au/Fe2O3 catalyst has also been carried out. The Au/Fe2O3 catalyst prepared by the HDP method showed much higher methane combustion activity than that prepared by the conventional deposition precipitation (DP) method. The XPS analysis showed the presence of Au in the different oxidation states (Au-0, Au1+ and Au3+) in the catalyst. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Au/Fe2O3, Deposition precipitation, Homogeneous deposition precipitation, Methane combustion, Supported nano-gold catalysts}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.08.008}, author = {Choudhary, Vasant R. and Patil, V. P. and Jana, Prabhas and Uphade, B. S.} } @article { ISI:000261133600029, title = {New microporous MOF material based on Zn(II)-polycarboxylate coordination polymer synthesized with the aid of 1,6-diaminohexane as template}, journal = {Microporous and Mesoporous Materials}, volume = {116}, number = {1-3}, year = {2008}, month = {DEC}, pages = {204-209}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A new microporous metal-organic framework (MOF) material ZBTEC-1 has been synthesized by designing infinite coordination polymer network formed between Zn(II) and 1,2,4,5-benzenetetracarboxylic acid (BTEC) under solvothermal conditions in the presence of 1,6-diaminohexane (DAH) as a single molecule template. Powder XRD data demonstrate that the ZBTEC-1 material has a new MOF structure. N-2 sorption studies indicated moderately good surface area (306 m(2) g(-1)) with large size micropores (average pore diameter ca. 0.7 nm) and very high pore volume (1.93 ccg(-1)). C-13 solid state MAS-NMR, FT-IR and UV-visible spectroscopic studies showed the presence of BTEC moieties in the framework. TEM and FE-SEM analysis indicated 30-60 nm diameter size microporous spherical particles for the ZBTEC-1 crystallites. This novel MOF material showed good hydrogen adsorption capacity at 77 K, indicating its potential application in hydrogen storage. (C) 2008 Elsevier Inc. All rights reserved.

}, keywords = {Coordination polymer, Metal-organic framework, Microporous material, porosity, Zinc complex}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2008.04.003}, author = {Chandra, Debraj and Kasture, Mahesh W. and Bhaumik, Asim} } @article { ISI:000253699900005, title = {Nonaqueous synthesis and characterization of capped alpha-Fe2O3 nanoparticles from iron(III) hydroxy-oleate precursor}, journal = {Polyhedron}, volume = {27}, number = {3}, year = {2008}, month = {FEB}, pages = {933-938}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The synthesis of capped alpha-Fe2O3 nanoparticles from thermal treatment of iron (III) hydroxy-oleate in boiling organic solvents around 250 degrees C with retention of the integrity of the oleate units during the reaction process is reported. The formation of capped iron oxide particles is accomplished under aerobic conditions while the solvents used in the synthesis have strong influence on the nature and morphology of nanoparticles. These nanoparticles are studied by means of X-ray powder diffraction, IR and XPS while the morphology and particle size of nanocrystals are evaluated using SEM and TEM analysis suggesting the formation of monocrystalline alpha-Fe2O3 particles having cubical and spherical morphologies with sizes ranging from 20 to 30 nm. This organophilic material with oleate capping around the surfaces can be readily dispersed in organic solvents thus forming organosols. These organosols exhibit band-edge emission photoluminescence band both in toluene as well as in solid state while FT-IR analysis reveals formation oleate capped nanoparticles The XPS data indicate ferric state having doublet from Fe 2P(3/2) and Fe 2p(1/2) core-level electrons. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {alpha-Fe2O3, capped nanoparticles, cubic morphology, ferrofluids, nonaqueous synthesis, Oleic acid, organosol}, issn = {0277-5387}, doi = {10.1016/j.poly.2007.11.021}, author = {Chikate, Rajeev C. and Jun, Ki-Won and Rode, Chandrasekhar V.} } @article {43245, title = {Orbital optimization in the density matrix renormalization group, with applications to polyenes and ss-carotene}, journal = {Journal of Chemical Physics}, volume = {128}, year = {2008}, month = {APR}, doi = {10.1063/1.2883976}, author = {Ghosh, Debashree and Hachmann, Johannes and Yanai, Takeshi and Chan, Garnet Kin-Lic} } @article { ISI:000271775108158, title = {ORGN 511-Total synthesis of 7-chloro-10-methoxycamptothecin: an important synthon for commercially important derivatives of camptothecin}, journal = {Abstracts of Papers of the American Chemical Society}, volume = {235}, year = {2008}, note = {235th American-Chemical-Society National Meeting, New Orleans, LA, APR 06-10, 2008}, month = {APR}, publisher = {Amer Chem Soc}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, issn = {0065-7727}, author = {Sharma, Anil and Chavan, Subhash P. and Venkatraman, M. S.} } @article { ISI:000256183700015, title = {Phosphotungstic acid on silica with modified acid sites as a solid catalyst for selective cleavage of tert-butyldimethylsilyl ethers}, journal = {Catalysis Communications}, volume = {9}, number = {9}, year = {2008}, month = {MAY}, pages = {1863-1868}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The strength and nature of acid sites of bulk phosphotungstic acid could be modified after dispersing it on silica support which was characterized by XRD, ammonia TPD and (31)P MAS NMR techniques. This solid acid catalyst was found to be highly selective for the cleavage of tert-butyldimethylsilyl ethers at room temperature. The catalyst was easily recovered by filtration and could be reused for several times without loss of any activity giving a TON of 9.5 x 10(5). (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Ammonia TPD, Catalytic cleavage, reaction pathway, solid acid, tert-butyldimethylsilyl ethers, XRD}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.03.017}, author = {Bhure, Mahesh H. and Kumar, Indresh and Natu, Arun D. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article { ISI:000259886100006, title = {Practical syntheses of 4-fluoroprolines}, journal = {Journal of Fluorine Chemistry}, volume = {129}, number = {9}, year = {2008}, month = {SEP}, pages = {781-784}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

4-Fluoroprolines are among the most useful nonnatural amino acids in chemical biology. Here, practical routes are reported for the synthesis of the 2S, 4R, 2S, 4S, and 2R,4S diastereomers of 4-fluoroproline. Each route starts with (2S,4R)-4-hydroxyproline, which is a prevalent component of collagen and hence readily available, and uses a fluoride salt to install the fluoro group. Hence, the routes provide process-scale access to these useful nonnatural amino acids. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {4-Fluoroproline, 4-Hydroxyproline, collagen, Nonnatural amino acid, Process-scale synthesis}, issn = {0022-1139}, doi = {10.1016/j.jfluchem.2008.06.024}, author = {Chorghade, Mukund S. and Mohapatra, Debendra K. and Sahoo, Gokarneswar and Gurjar, Mukund K. and Mandlecha, Manish V. and Bhoite, Nitin and Moghe, Santosh and Raines, Ronald T.} } @article { ISI:000253014400014, title = {Protection of oligo deoxynucleotides against nuclease degradation through association with self-assembling peptides}, journal = {Biomaterials}, volume = {29}, number = {8}, year = {2008}, month = {MAR}, pages = {1099-1108}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Aggregates of the self-assembling peptide EAK16II or EAK16IV and oligodeoxynucleotides (ODNs) were prepared, and their stability upon diluting the solution was investigated by UV-vis spectroscopy. The aggregates prepared at pH 4 and pH 7 did not dissociate after the solution was diluted 5- and 10-fold. The resistance against Escherichia coli exonuclease I of the ODN located in the EAK-ODN aggregates was studied by fluorescence resonance energy transfer (FRET) after the ODN had aggregated with EAK 16II or EAK 16IV at pH 4 or pH 7. The effect that the peptide sequence, peptide concentration, pH, and centrifugation had on protecting the aggregated ODN against nuclease degradation was investigated. Significant nuclease resistance was obtained after the EAK-ODN aggregates had been prepared at pH 4, with an EAK16IV concentration greater than a threshold value, and ensuring that the solution was not centrifuged immediately after sample preparation. Centrifuging the EAK16IV-ODN solution immediately after sample preparation resulted in the loss of this nuclease protection. However, if the solution of EAK-ODN aggregates was centrifuged 24h after sample preparation, the nuclease protection afforded by the EAK16IV-ODN aggregates to the ODN was maintained even after being subject to a 10-fold dilution and up to 4 rounds of centrifugation over 4 days. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {aggregate, centrifugation, Fluorescence resonance energy transfer (FRET), nuclease resistance, oligonucleotide, self-assembling peptide}, issn = {0142-9612}, doi = {10.1016/j.biomaterials.2007.10.049}, author = {Wang, M. and Adikane, H. V. and Duhamel, J. and Chen, P.} } @article { ISI:000259602400108, title = {Recovery of ammonical salts from mother liquid of 2-methyl-5-nitroimidazole}, journal = {Asian Journal of Chemistry}, volume = {20}, number = {4}, year = {2008}, month = {APR}, pages = {3287-3288}, publisher = {ASIAN JOURNAL OF CHEMISTRY}, address = {11/100 RAJENDRA NAGAR, SECTOR 3,, SAHIBABAD 201 005, GHAZIABAD, INDIA}, abstract = {

An attempt have been made to recover the ammonical salt (ammonium sulphate and ammonium nitrate) from the mother liquid of 2-methyl-5-nitroimidazole successfully.

}, keywords = {2-methyl-5-nitroimidazole, ammonium nitrate, ammonium sulphate, Recovery}, issn = {0970-7077}, author = {Dongare, Mohan K. and Rode, C. V. and Chandorkar, J. G.} } @article { ISI:000260988200019, title = {Selective epoxidation of styrene to styrene oxide by TBHP using simple transition metal oxides (NiO, CoO or MoO3) as highly active environmentally-friendly catalyst}, journal = {Catalysis Communications}, volume = {10}, number = {2}, year = {2008}, month = {NOV}, pages = {205-207}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Simple transition metal oxides, such as NiO, CoO or MoO3, etc. show high catalytic activity for the selective epoxidation of styrene to styrene oxide by TBHP. The order of choice for different transition metal oxides for epoxidation is NiO \> CoO \> MoO3 \> Cr2O3 \> Fe2O3 \> ZnO \>= U3O8 \>\> TiO2 \>\> MnO2. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {CoO, epoxidation, MoO3, NiO, styrene, Styrene oxide, TBHP}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.08.020}, author = {Choudhary, Vasant R. and Jha, Rani and Jana, Prabhas} } @article { ISI:000263320900032, title = {Sequence-specific unusual (1 -> 2)-type helical turns in alpha/beta-hybrid peptides}, journal = {Journal of the American Chemical Society}, volume = {130}, number = {52}, year = {2008}, month = {DEC}, pages = {17743-17754}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

This article describes novel conformationally ordered (alpha/beta-hybrid peptides consisting of repeating L-proline-anthranilic acid building blocks. These oligomers adopt a compact, right-handed helical architecture determined by the intrinsic conformational preferences of the individual amino acid residues. The striking feature of these oligomers is their ability to display an unusual periodic pseudo beta-turn network of nine-membered hydrogen-bonded rings formed in the forward direction of the sequence by 1{\textendash}\>2 amino acid interactions both in solid-state and in solution. Conformational investigations of several of these oligomers by single-crystal X-ray diffraction, solution-state NMR, and ab initio MO theory suggest that the characteristic steric and dihedral angle restraints exerted by proline are essential for stabilizing the unusual pseudo beta-turn network found in these oligomers. Replacing proline by the conformationally flexible analogue alanine (Ala) or by the conformationally more constrained alpha-amino isobutyric acid (Aib) had an adverse effect on the stabilization of this structural architecture. These findings increase the potential to design novel secondary structure elements profiting from the steric and dihedral angle constraints of the amino acid constituents and help to augment the conformational space available for synthetic oligomer design with diverse backbone structures.

}, issn = {0002-7863}, doi = {10.1021/ja804297f}, author = {Prabhakaran, Panchami and Kale, Sangram S. and Puranik, Vedavati G. and Rajamohanan, P. R. and Chetina, Olga and Howard, Judith A. K. and Hofmann, Hans-Joerg and Sanjayan, Gangadhar J.} } @article { ISI:000253339800027, title = {Sn-119 magic angle spinning NMR of nanocrystalline SnO2}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {8}, number = {1}, year = {2008}, month = {JAN}, pages = {321-328}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Nanocrystalline SnO2 samples of different grain sizes, prepared by inert gas condensation technique (IGCT) and chemical precipitation method and conforming to the tetragonal phase, have been studied by variable speed (3-10 kHz) Sn-119 MAS NMR at 11.74 Tesla field. Sn-119 solid-state NMR results show that the IGCT prepared samples have good crystallinity and phase purity compared to the samples prepared by the chemical method. The determination of Sn-119 chemical shielding parameters (delta(iso), Delta delta and eta) from slow MAS spectra shows that the Sn-119 isotropic chemical shift (delta(iso)) is strongly influenced at smaller grain sizes, attributable to the change in the O2- local symmetry for the surface Sn-119 ions at smaller grain sizes. The observed line widths in MAS spectra are significantly larger than the life-time broadening due to spin-lattice (T-1) and spin-spin (T,) relaxation. The Sn-119 MAS NMR spectra are thus inhomogeneously broadened by a distribution of isotropic chemical shifts, the line broadening increasing with decrease in grain size.

}, keywords = {Hydrolysis, IGCT, MAS NMR, nanocrystalline SnO2}, issn = {1533-4880}, doi = {10.1166/jnn.2008.015}, author = {Sabarinathan, V. and Chandran, C. Vinod and Ramasamy, S. and Ganapathy, Subramanian} } @article { ISI:000261163000013, title = {Structural elucidation of propargylated products of 3-substituted-1,2,4-triazole-5-thiols by NMR techniques}, journal = {Magnetic Resonance in Chemistry}, volume = {46}, number = {12}, year = {2008}, month = {DEC}, pages = {1168-1174}, publisher = {JOHN WILEY \& SONS LTD}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

Propargylation of 3-substituted-1,2,4-triazole-5-thiols, which predominantly exist as their thione tautomers, was carried out with the view to synthesize different heterocycles and study their biological activity. Three different products namely, a mono S-propargyl and two S,N-dipropargyl regioisomers, arising from N1/N2 substitution, were isolated and characterized. Unambiguous structural elucidation of the regioisomers of S,N-dipropargyl derivatives was achieved by means of (13)C-(1)H HMBC technique. The proportion of the regioisomers was found to vary with the substituent on the 1,2,4-triazole thiols. No product corresponding to N4 substitution was isolated from any of the reactions carried out. Copyright (C) 2008 John Wiley \& Sons, Ltd.

}, keywords = {(1)H NMR, (13)C NMR, (15)N NMR, 1, 2, 4-triazoles, HMBC, NMR, Regioisomers}, issn = {0749-1581}, doi = {10.1002/mrc.2307}, author = {Chaudhary, Preeti M. and Chavan, Sayalee R. and Kavitha, M. and Maybhate, Shailaja P. and Deshpande, Sunita R. and Likhite, Anjali P. and Rajamohanan, P. R.} } @article { ISI:000252354300005, title = {Study of a laboratory-scale froth flotation process using artificial neural networks}, journal = {Mineral Processing and Extractive Metallurgy Review}, volume = {29}, number = {2}, year = {2008}, month = {DEC}, pages = {130-142}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A three-layer feed-forward artificial neural network (ANN) model, trained using the error back propagation algorithm, has been established to simulate the froth flotation process for the beneficiation of coal fines. The network model validates the experimentally observed qualitative and quantitative trends. The optimal model parameters in terms of network weights have been estimated and can be used to compute the parameters of the coal flotation process over wide-ranging experimental conditions.

}, keywords = {back propagation algorithm, froth flotation, laboratory-scale, neural network}, issn = {0882-7508}, doi = {10.1080/08827500701421912}, author = {Kalyani, V. K. and Pallavika and Chaudhuri, Sanjay and Charan, T. Gouri and Haldar, D. D. and Kamal, K. P. and Badhe, Yogesh P. and Tambe, S. S. and Kulkarni, B. D.} } @article { ISI:000254180300055, title = {Synthesis and antimicrobial activity of beta-lactam-bile acid conjugates linked via triazole}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {18}, number = {6}, year = {2008}, month = {MAR}, pages = {2043-2047}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Synthesis of novel 1,2,3-triazole-linked beta-lactam-bile acid conjugates 17-24 using 1,3-dipolar cycloaddition reaction of azido beta-lactam and terminal alkyne of bile acids in the presence of Cu( I) catalyst ( click chemistry) have been realized. These molecules were evaluated in vitro for their antifungal and antibacterial activities. Most of the compounds exhibited significant antifungal and moderate antibacterial activity against all the tested strains. (c) 2008 Elsevier Ltd. All rights reserved.

}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2008.01.102}, author = {Vatmurge, Namdev S. and Hazra, Braja G. and Pore, Vandana S. and Shirazi, Fazal and Chavan, Pradnya S. and Deshpande, Mukund V.} } @article { ISI:000260429100023, title = {Synthesis and biological evaluation of bile acid dimers linked with 1,2,3-triazole and bis-beta-lactam}, journal = {Organic \& Biomolecular Chemistry}, volume = {6}, number = {20}, year = {2008}, month = {OCT}, pages = {3823-3830}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report herein the synthesis and biological evaluation of bile acid dimers 11-18 linked through 1,2,3-triazole and bis-beta-lactam. The dimers 11-18 were synthesized using 1,3-dipolar cycloaddition reaction of diazido bis-beta-lactams 3, 4 and terminal alkynes 7-10 derived from cholic acid/deoxycholic acid in the presence of Cu(I) catalyst (click chemistry). These novel molecules were evaluated in vitro for their antifungal and antibacterial activity. Most of the compounds exhibited significant antifungal as well as antibacterial activity against all the tested fungal and bacterial strains. Moreover, their in vitro cytotoxicities towards HEK-293 and MCF-7 cells were also established.

}, issn = {1477-0520}, doi = {10.1039/b809221d}, author = {Vatmurge, Namdev S. and Hazra, Braja G. and Pore, Vandana S. and Shirazi, Fazal and Deshpande, Mukund V. and Kadreppa, Sreenath and Chattopadhyay, Samit and Gonnade, Rajesh G.} } @article { ISI:000254416300052, title = {Synthesis and magnetic properties of barium-calcium hexaferrite particles prepared by sol-gel and microemulsion techniques}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {320}, number = {6}, year = {2008}, month = {MAR}, pages = {1095-1101}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The preparation of W-type hexaferrite particles with the composition BaCa2Fe16O27 by microemulsion and a stearic acid sol - gel method with and without surfactant has been investigated at various sintering temperatures. The structural and magnetic characteristics have been studied by X-ray diffraction ( XRD), a vibrating sample magnetometer ( VSM), scanning electron microscopy ( SEM), thermogravimetric analysis ( TGA), differential scanning calorimetric ( DSC) and Fourier transform infrared ( FTIR) techniques. The effect of sintering temperature on the properties of BaCa2Fe16O27 hexaferrites has been studied. The value of saturation magnetization ( M-s) depends on types of surfactant used. The sample prepared in the presence of polyoxyethylene ( 20) sorbitan monooleat ( Tween 80) shows low saturation magnetization ( M-s 15.10 emu/g), whereas the other sample prepared in the presence of a surfactant cetyltrimethylammonium bromide (CTAB) exhibits high saturation magnetization (M-s = 24.60 emu/g) compared to the normal sample. (C) 2007 Elsevier B. V. All rights reserved.

}, keywords = {BaCa2Fe16O27, hexaferrite, magnetic property, Microemulsion, Sol-gel method, surfactant}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2007.10.032}, author = {Jotania, R. B. and Khomane, Ramdas B. and Chauhan, C. C. and Menon, Shamal K. and Kulkarni, B. D.} } @article { ISI:000259684000003, title = {Synthesis and spectral studies of nitrogen-oxygen donor macrocyclic metal complexes of Mn(II), Cu(II) Zn(II), Pd(II) and Pt(II)}, journal = {Journal of the Indian Chemical Society}, volume = {85}, number = {9}, year = {2008}, month = {SEP}, pages = {896-900}, publisher = {SCIENTIFIC PUBL-INDIA}, type = {Article}, address = {5-A, NEW PALI RD, PO BOX 91, NEAR HOTEL TAJ HARI MAHAL, JODHPUR, 342 003, INDIA}, abstract = {

The complexes of Mn(II), Cu(II), Zn(II), Pd(II) and Pt(II) with a nitrogen-oxygen donor macrocyclic ligand, viz. 5,6,13,14-dibenzo[1,4,8,11]dioxadiaza-5,7,11,13-cyclotetradecin have been synthesized and characterized by elemental analysis, molar conductance, magnetic susceptibility measurements, spectral and electrochemical studies. The molar conductance measurements of the complexes in DMF solution correspond to non electrolytic nature for M(L)X(2) complexes and 1 : 2 electrolytes for M {\textquoteleft}(L)X(2) Complexes [where M = Mn(II), Cu(II); M {\textquoteleft} = Zn(II), Pd(II) and Pt(II); X = Cl(-), NO(3)(-), and L = ligand]. Thus, the complexes may be formulated as [M(L)X(2)] and [M {\textquoteleft}(L)]X(2) respectively. Mn(II), Cu(II) complexes were of the high-spin type whereas the complexes of Zn(II), Pd(II) and Pt(II) were diamagnetic. On the basis of spectral studies an octahedral geometry has been assigned for Mull, tetragonal for Cull, tetrahedral for Zn(II) complexes whereas square planar for Pd(II) and Pt(II) complexes.

}, keywords = {Cu(II), macrocyclic, Mu(II), Pd(II), Pt(II), Zn(II)}, issn = {0019-4522}, author = {Chandra, Sulekh and Verma, Shweta and Meera, P.} } @article { ISI:000253181000037, title = {Synthesis, characterization of chemically deposited indium selenide thin films at room temperature}, journal = {Journal of Physics and Chemistry of Solids}, volume = {69}, number = {1}, year = {2008}, month = {JAN}, pages = {249-254}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Polycrystalline In2Se3 semiconducting thin films were prepared by using relatively simple chemical bath deposition method at room temperature by the reaction between indium chloride, tartaric acid, hydrazine hydrate and sodium selenosulphate in an aqueous alkaline medium. Various preparative conditions of thin film deposition are outlined. The as grown films were found to be transparent, uniform, well adherent and red in color. The films were characterized using X-ray diffraction (XRD), scanning electron microscopy, atomic absorption spectroscopy and energy dispersive atomic X-ray diffraction (EDAX). The XRD analysis of the film showed the presence of polycrystalline nature with hexagonal crystal structure. SEM study revels that the grains are homogenous, without cracks or pinholes and well covers the glass substrate. The optical absorption and electrical conductivity was measured. The direct optical band gap value for the films was found to be of the order of 2.35eV at room temperature and have specific electrical conductivity of the order of 10(-2) (Omega cm)(-1) showing n-type conduction mechanism. The utility of the adapted technique is discussed from the view-point of applications considering the optoelectric and structural data. (c) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {Chemical synthesis, Semiconductor}, issn = {0022-3697}, doi = {10.1016/j.jpcs.2007.08.070}, author = {Asabe, M. R. and Chate, P. A. and Delekar, S. D. and Garadkar, K. M. and Mulla, Imtiaz S. and Hankare, P. P.} } @article { ISI:000259972800039, title = {Synthesis of chimeric tetrapeptide-linked cholic acid derivatives: impending synergistic agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {18}, number = {20}, year = {2008}, month = {OCT}, pages = {5512-5517}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Tetrapeptides derived from glycine and beta-alanine were hooked at the C-3 beta position of the modified cholic acid to realize novel linear tetrapeptide-linked cholic acid derivatives. All the synthesized compounds were tested against a wide variety of microorganisms (Gram-negative bacteria, Gram-positive bacteria and fungi) and their cytotoxicity was evaluated against human embryonic kidney (HEK293) and human mammary adenocarcinoma (MCF-7) cell lines. While relatively inactive by themselves, these compounds interact synergistically with antibiotics such as fluconazole and erythromycin to inhibit growth of fungi and bacteria, respectively, at 1-24 mu g/mL. The synergistic effect shown by our novel compounds is due to their inherent amphiphilicity. The fractional inhibitory concentrations reported are comparable to those reported for Polymyxin B derivatives. (c) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Antimicrobial activity, Cholic acid, Cytotoxicity, Synergism, Tetrapeptide}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2008.09.013}, author = {Bavikar, Sudhir N. and Salunke, Deepak B. and Hazra, Braja G. and Pore, Vandana S. and Dodd, Robert H. and Thierry, Josiane and Shirazi, Fazal and Deshpande, Mukund V. and Kadreppa, Sreenath and Chattopadhyay, Samit} } @article {Council of Scientific and Industrial Research (CSIR), title = {Synthesis of five and six membered aminocyclitols: stereoselective michael and henry reaction approach with D-glucose derived alpha,beta-unsaturated ester}, journal = {Tetrahedron}, volume = {64}, number = {40}, year = {2008}, month = {SEP}, pages = {9574-9580}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The stereoselective intermolecular Michael addition of nitromethane to D-glucose derived alpha,beta-unSaturated ester 7 afforded L-ido-configurated nitroester 8 as the only product that on reduction of the ester functionality, cleavage of 1,2-acetonide and the intramolecular Henry reaction afforded exclusively muco-nitroinositol 9. While reduction of the ester functionality in 8, deprotection of 1,2-acetonide, oxidative cleavage with NaIO(4) and the intrarnolecular Henry reaction afforded nitrocyclopentitol 13. Nitrocyclitols 9 and 13 were converted to the hydroxyethyl substituted aminocyclohexitol 5 and aminocyclopentitol 6, respectively. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {aminocyclitols, carbohydrates, Henry reaction, Michael addition, nitroinositol}, issn = {0040-4020}, doi = {10.1016/j.tet.2008.07.049}, author = {Chakraborty, Chaitali and Vyavahare, Vinod P. and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article { ISI:000260095800003, title = {Synthesis of substituted styrenes and stilbenes mediated by palladium on zirconia}, journal = {Journal of Chemical Research-S}, number = {9}, year = {2008}, month = {SEP}, pages = {495-499}, publisher = {SCIENCE REVIEWS LTD}, type = {Article}, address = {PO BOX 314, ST ALBANS AL1 4ZG, HERTS, ENGLAND}, abstract = {

Palladium on zirconia has been found to be an effective catalyst for the synthesis of various substituted styrenes and stilbenes, including biologically active natural products, by reaction of aryl halides with olefins.

}, keywords = {heterogeneous catalyst, palladium on zirconia, stilbenes, styrenes}, issn = {0308-2342}, doi = {10.3184/030823408X340807}, author = {Borate, Hanumant B. and Dumbre, Deepa K. and Wakharkar, Radhika D. and Choudhary, Vasant R.} } @article { ISI:000257533800025, title = {Synthesis, structure and reactivity of azosalophen complexes of palladium}, journal = {Polyhedron}, volume = {27}, number = {9-10}, year = {2008}, month = {JUN}, pages = {2209-2215}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The ligands 2-(arylazo)-1-N-salicylidene phenylamine, H(2)L(sal), (where H represents the dissociable protons upon complexation) afford stable orthopalladated complexes, [(L(sal))Pd], upon treatment with Na(2)[PdCl(4)]. The dinegative anionic (L(sal))(2-) ligands bind Pd(II) in a tetradentate (C, N, N, O) fashion with a distorted square planar geometry. The newly synthesized palladium complexes underwent oxygen insertion into the Pd-C bond with mCPBA (m-chloroperbenzoic acid) or TBHP (terbutylhydroperoxide)/[VO(acac)(2)] leading to the formation of stable azosalophen complexes of Pd(II) with the (O, N, N, O) coordination mode of the oxygenated ligand. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {2-(arylazo)-1-N-salicylidene phenylamine, azosalophen complex, orthopalladation, oxygen insertion}, issn = {0277-5387}, doi = {10.1016/j.poly.2008.03.028}, author = {Pattanayak, Poulami and Pratihar, Jahar Lal and Patra, Debprasad and Puranik, Vedavati G. and Chattopadhyay, Surajit} } @article { ISI:000261466800007, title = {Tandem aza-michael-condensation-aldol cyclization reaction: approach to the construction of DE synthon of (+/-)-camptothecin}, journal = {Synlett}, number = {18}, year = {2008}, month = {NOV}, pages = {2781-2784}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

An efficient synthesis of the DE ring of camptothecin, employing a Reformatsky and a tandem one-pot, three-step transformation involving aza-Michael reaction, condensation with ethyl malonyl chloride followed by intramolecular {\textquoteleft}aldol{\textquoteright} reaction to furnish the dihydropyridone derivative from commercially available starting materials, has been achieved.

}, keywords = {Aldol cyclizations, alkaloids, antitumor, Natural products, Reformatsky reaction}, issn = {0936-5214}, doi = {10.1055/s-0028-1083539}, author = {Chavan, Subhash P. and Dhawane, Abasaheb N. and Kalkote, Uttam R.} } @article { ISI:000254851800003, title = {Tandem synthesis of beta-amino alcohols from aniline, dialkyl carbonate, and ethylene glycol}, journal = {Industrial \& Engineering Chemistry Research}, volume = {47}, number = {8}, year = {2008}, month = {APR}, pages = {2484-2494}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient tandem route for selective synthesis of beta-amino alcohols from anilines, dialkyl carbonate and ethylene glycol in the presence of recyclable Na-Y zeolite has been demonstrated. Transesterification of dialkyl carbonate by ethylene glycol produce ethylene carbonate which further reacts with aniline to give beta-amino alcohols in a single step. This reaction system was studied under high-pressure as well as pot reaction condition. Various process parametric effects were investigated for the reaction of aniline, dialkyl carbonate, and ethylene glycol. It was observed that a maximum 51\% yield of mono-beta-amino alcohol, i.e., N-phenylethanolamine (NPEA). is obtained under pressure conditions. The yield of NPEA was improved drastically (\>91\%) by carrying out the reaction under pot conditions using diethyl carbonate as transesterification agent. Finally activity and selectivity of solid catalyst was explained on the basis of nature of active sites and pore structure of the catalyst.

}, issn = {0888-5885}, doi = {10.1021/ie070617q}, author = {Shivarkar, Anandkumar B. and Gupte, Sunil P. and Chaudhari, Raghunath V.} } @article { ISI:000255342500023, title = {Temperature dependent structural studies and magnetic properties of BaCa2Fe16O27 hexaferrites prepared by stearic acid gel route in presence of SDS surfactant}, journal = {Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry}, volume = {38}, number = {2}, year = {2008}, note = {Symposium on New Routes to Inorganic Materials, Films and Nanocrystals held at ICMAT 2007, Singapore, SINGAPORE, JUL 01-06, 2007}, month = {MAR}, pages = {225-228}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article, Proceedings Paper}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

The preparation of BaCa2Fe16O27 hexaferrite powders by a stearic acid gel method with SDS surfactant has been investigated at various sintering temperatures. The samples were characterized by X-ray diffraction, scanning electron microscopy (SEM), TGA, FTIR and vibrating sample magnetometer (VSM). The effect of sintering temperature on properties of BaCa2Fe16O27 hexaferrites was studied. In presence of sodium dodecyl sulfate (SDS) surfactant, the magnetic parameters, like saturation magnetization, coercivity and remanent magnetization, have been calculated from hysteresis loop.

}, keywords = {BaCa2Fe16O27, magnetic properties, stearic acid gel method}, issn = {1553-3174}, doi = {10.1080/15533170801926549}, author = {Joyania, R. B. and Khomane, Ramdas B. and Chauhan, C. C. and Kulkarni, B. D.} } @article { ISI:000255698500020, title = {Total synthesis and determination of relative and absolute configuration of multiplolide A}, journal = {Journal of Organic Chemistry}, volume = {73}, number = {10}, year = {2008}, month = {MAY}, pages = {3817-3822}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A flexible approach for total syntheses of possible multiplolide A diastereomers establishing the relative and absolute configuration is documented. The adopted strategy features ring-closing metathesis (RCM) as the key reaction and screening of a set of substrates for the feasibility of RCM in general and for the requisite E-configuration of ring olefin in particular. Selective protecting groups manipulation prior to the assembly of the central macrocyclic core was instrumental in installing the epoxide functionality on a fully deprotected nonenolide at the end of the synthesis.

}, issn = {0022-3263}, doi = {10.1021/jo7027568}, author = {Ramana, C. V. and Khaladkar, Tushar P. and Chatterjee, Soumitra and Gurjar, Mukund K.} } @article { ISI:000260119300077, title = {Transverse susceptibility study of the effect of varying dipolar interactions on anisotropy peaks in a three-dimensional assembly of soft ferrite nanoparticles}, journal = {Journal of Applied Physics}, volume = {104}, number = {6}, year = {2008}, month = {SEP}, pages = {Article No. 063901}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Collective magnetization dynamics in nanoparticle assemblies is of current interest as it forms the basis of high density storage media. It is important to understand how interparticle interactions in a three-dimensional (3D) arrangement of superparamagnetic nanoparticles would affect the overall effective magnetic anisotropy of the system. We have studied the influence of varying strengths of dipolar interaction on the static and dynamic magnetic properties of surfactant-coated monodispersed manganese zinc ferrite nanoparticles using reversible transverse susceptibility. We track the evolution of the anisotropy peaks with varying magnetic field, temperature, and interaction strength. The blocking temperature shows an increase from 28 to 32 K and the coercive field (at 10 K) shows an increase from 144 to 192 Oe as the system changes from the case of weakly interacting to strongly interacting 3D assembly of the particles. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.2977592]

}, issn = {0021-8979}, doi = {10.1063/1.2977592}, author = {Poddar, Pankaj and Morales, Marienette B. and Frey, Natalie A. and Morrison, Shannon A. and Carpenter, Everett E. and Srikanth, Hariharan} } @article { ISI:000261232200039, title = {Tunable surface modification of silica nanoparticles through {\textquoteleft}click{\textquoteright} chemistry}, journal = {Current Science}, volume = {95}, number = {9}, year = {2008}, month = {NOV}, pages = {1327-1333}, publisher = {INDIAN ACAD SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Tuning the surface functionality of silica nanoparticles through a {\textquoteleft}click{\textquoteright} chemistry-based protocol is demonstrated. Pyrene, a fluorophore that displays excimer emission specifically at higher density/concentration is chosen for highlighting the fidelity of surface functionalization. The UV-visible absorbance of the pyrene chromophore capping the nanoparticle is used to determine the amount of pyrene units present on the surface of a silica nanoparticle.

}, keywords = {pyrene, silica nanoparticles, surface functionality, {\textquoteleft}Click{\textquoteright} chemistry}, issn = {0011-3891}, author = {Chandran, S. Prathap and Hotha, Srinivas and Bhagavatula L. V. Prasad} } @article { ISI:000254443900006, title = {Ultrasound promoted asymmetric transfer hydrogenation of ketones using Ru(II)arene/amino alcohol catalyst system}, journal = {Ultrasonics Sonochemistry}, volume = {15}, number = {4}, year = {2008}, month = {APR}, pages = {289-293}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Asymmetric transfer hydrogenation of ketones using Ru(II)arene/amino alcohol catalyst system proceeds with significant rate enhancement by ultrasound promotion. Comparison of the silent reactions carried out at 25 degrees C with reactions under sonochemical activation at 25 degrees C clearly showed enhancement in catalytic activity by 5-10 times without significantly affecting the enantioselectivity. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {asymmetric catalysis, transfer hydrogenation, Ultrasound}, issn = {1350-4177}, doi = {10.1016/j.ultsonch.2007.10.003}, author = {Shingote, Savita K. and Kelkar, Ashutosh A. and Borole, Yogesh L. and Joshi, Pradip D. and Chaudhari, Raghunath V.} } @article { ISI:000252195200043, title = {Utilization of molasses sugar for lactic acid production by lactobacillus delbrueckii subsp delbrueckii mutant Uc-3 in batch fermentation}, journal = {Applied and Environmental Microbiology}, volume = {74}, number = {1}, year = {2008}, month = {JAN}, pages = {333-335}, publisher = {AMER SOC MICROBIOLOGY}, type = {Article}, address = {1752 N ST NW, WASHINGTON, DC 20036-2904 USA}, abstract = {

Efficient lactic acid production from cane sugar molasses by Lactobacillus delbrueckii mutant Uc-3 in batch fermentation process is demonstrated. Lactic acid fermentation using molasses was not significantly affected by yeast extract concentrations. The final lactic acid concentration increased with increases of molasses sugar concentrations up to 190 g/liter. The maximum lactic acid concentration of 166 g/liter was obtained at a molasses sugar concentration of 190 g/liter with a productivity of 4.15 g/liter/h. Such a high concentration of lactic acid with high productivity from molasses has not been reported previously, and hence mutant Uc-3 could be a potential candidate for economical production of lactic acid from molasses at a commercial scale.

}, issn = {0099-2240}, doi = {10.1128/AEM.01595-07}, author = {Dumbrepatil, Arti and Adsul, Mukund G. and Chaudhari, Shivani and Khire, Jayant Malhar and Gokhale, Digambar V.} } @article {43242, title = {Accelerating convergence in iterative solution for large-scale complete active space self-consistent-field calculations}, journal = {International Journal of Quantum Chemistry}, volume = {109}, year = {2009}, month = {AUG}, pages = {2178-2190}, abstract = {An algorithm that accelerates the convergence of the iterative optimization of the complete active space self-consistent field (CASSCF) wavefunction so as to find a optimum solution in fewer macroiterations is described. The algorithm is oriented to large-scale CASSCF problems that are to be solved with a combination of density matrix renormalization group (DMRG) method for the configuration interaction (CI) process. The algorithm is based on the alternating (or two-step) CASSCF optimization in which the CI and molecular orbital (MO) parameters are optimized separately. Convergence ratio is improved by finding further optimized MOs from a linear extrapolation of the MO sets of the iteration history. The acceleration results in fewer diagonalizations in a total CASSCF calculation to save a considerable computational cost. The convergence performance is examined in a couple of realistic applications on SiC(3) and poly (phenyl)carbenes. For poly(phenyl)carbenes, the large-size CASSCF calculations with CAS(30e,30o) that entails full pi valence space as well as sp(2) orbital space of carbenes are performed by using the practical implementation of DMRG-CASSCF in conjunction with the acceleration technique. (C) 2009 Wiley Periodicals, Inc. Int J Quantum Chem 109: 2178-2190, 2009}, doi = {10.1002/qua.22099}, author = {Yanai, Takeshi and Kurashige, Yuki and Ghosh, Debashree and Chan, Garnet Kin-Lic} } @article { ISI:000269426900019, title = {Acetalization of glycerol using mesoporous MoO3/SiO2 solid acid catalyst}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {310}, number = {1-2}, year = {2009}, month = {SEP}, pages = {150-158}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Acetalization of glycerol with various aldehydes has been carried out using mesoporous MoO3/SiO2 as a solid acid catalyst. A series of MoO3/SiO2 catalysts with varying MoO3 loadings(1-20 mol\%) were prepared by sol-gel technique using ethyl silicate-40 and ammonium heptamolybdate as silica and molybdenum source respectively. The sol-gel derived samples were calcined at 500 degrees C and characterized using various physicochemical characterization techniques. The XRD of the calcined samples showed the formation of amorphous phase up to 10 mol\% MoO3 loading and at higher loading of crystalline alpha-MoO3 on amorphous silica support. TEM analyses of the materials showed the uniform distribution of MoO3 nanoparticles on amorphous silica support. Raman spectroscopy showed the formation of silicomolybdic acid at low Mo loading and a mixture of alpha-MoO3 and polymolybdate species at high Mo loadings. Moreover the Raman spectra of intermediate loading samples also suggest the presence of beta-MoO3. Acetalization of glycerol with benzaldehyde was carried out using series of MoO3/SiO2 catalysts with varying MoO3 loadings (1-20 mol\%). Among the series, MoO3/SiO2 With 20 mol\% MoO3 loadings was found to be the most active catalyst in acetalization under mild conditions. Maximum conversion of benzaldehyde (72\%) was obtained in 8 h at 100 degrees C with 60\% selectivity for the six-membered acetal using 20\% MoO3/SiO2. Interestingly with substituted benzaldehydes under same reaction conditions the conversion of aldehydes decreased with increase in selectivity for six-membered acetals. These results indicate the potential of this catalyst for the acetalization of glycerol for an environmentally benign process. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Acetalization, Aldehyde, Glycerol, Silicomolybdic acid, solid acid}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.06.010}, author = {Shubhangi B. Umbarkar and Kotbagi, Trupti V. and Biradar, Ankush V. and Pasricha, Renu and Chanale, Jyoti and Dongare, Mohan K. and Mamede, Anne-Sophie and Lancelot, Christine and Payen, Edmond} } @article { ISI:000263158700050, title = {Acylation of nitrobenzene and substituted nitrobenzenes by benzoyl chloride using GaClx- and GaAlClx-grafted meporous Si-MCM-41 catalysts}, journal = {Microporous and Mesoporous Materials}, volume = {119}, number = {1-3}, year = {2009}, month = {MAR}, pages = {360-362}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A acylation of nitrobenzene and substituted nitrobenzene by benzoyl chloride can be accomplished with good yield in a short reaction period (\<= 3 h), even in the presence of moisture, using GaClx- and GaAlClx-grafted mesoporous silica (Si-MCM-41) catalyst. The catalyst is reusable/environmentally friendly. The presence of moisture in the catalyst has beneficial effect on the acylation reaction. (C) 2008 Elsevier Inc. All rights reserved.

}, keywords = {Acylation, Benzoyl chloride, GaAlClx-grafted Si-MCM-41, GaClx-grafted Si-MCM-41, nitrobenzene}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2008.11.001}, author = {Choudhary, Vasant R. and Jha, Rani} } @article { ISI:000261909800003, title = {Arthrobacter sp lipase immobilization for preparation of enantiopure masked beta-amino alcohols}, journal = {Bioorganic \& Medicinal Chemistry}, volume = {17}, number = {1}, year = {2009}, month = {JAN}, pages = {29-34}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Recent reports on immobilization of lipase from Arthrobacter sp. (ABL, MTCC 5125; IIIM isolate) on insoluble polymers have shown altered properties including stability and enantioselectivity. Present work demonstrates a facile method for the preparation of enantiopure beta-amino alcohols by modulation of ABL enzyme properties via immobilization on insoluble as well as soluble supports using entrapment/covalent binding techniques. Efficacies of immobilized ABL on insoluble supports prepared from tetraethylorthosilicate/aminopropyltriethoxy silane and soluble supports derived from copolymerization of N-vinyl pyrrolidone-allylglycidyl ether (ANP type)/N-vinyl pyrrolidone-glycidyl methacrylate ( GNP type) for kinetic resolution of masked beta-amino alcohols have been studied vis-a-vis free ABL enzyme/wet cell biomass. The immobilized lipase on different insoluble/soluble supports has shown 21 - 110 mg/g protein binding and 30 - 700 U/g activity for hydrolyzing tributyrin substrate. The findings have shown a significant enhancement in enantioselectivity (ee 99\%) vis-a-vis wet cell biomass providing ee 70-90\% for resolution of beta-amino alcohols. (c) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Arthrobacter sp lipase, beta-Aminoalcohol, Enantioselectivity, Immobilization, soluble polymer}, issn = {0968-0896}, doi = {10.1016/j.bmc.2008.11.023}, author = {Chaubey, Asha and Parshad, Rajinder and Gupta, Pankaj and Taneja, Subhash C. and Qazi, Ghulam N. and Rajan, C. R. and Ponrathnam, S.} } @article { ISI:000265186800069, title = {Assembly of gold nanoparticles on single-walled carbon nanotubes by using click chemistry}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {9}, number = {5}, year = {2009}, month = {MAY}, pages = {3261-3263}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Azide moiety-functionalized gold nanoparticles were conjugated with acetylene functionalized single-walled carbon nanotubes by employing copper-catalyzed Huisgen{\textquoteright}s [3+2] dipolar cycloaddition {\textquoteleft}click chemistry{\textquoteright} reaction. Evidences of conjunction were observed by TEM, EDX and Raman images.

}, keywords = {Carbon nanotubes, Click chemistry, Functionalization, Nanoparticles}, issn = {1533-4880}, doi = {10.1166/jnn.2009.035}, author = {Rana, Sravendra and Kumar, Indresh and Yoo, Hye Jin and Cho, Jae Whan} } @article { ISI:000269374500012, title = {Changes in volatile composition during fruit development and ripening of {\textquoteleft}Alphonso{\textquoteright} mango}, journal = {Journal of the Science of Food and Agriculture}, volume = {89}, number = {12}, year = {2009}, month = {SEP}, pages = {2071-2081}, publisher = {JOHN WILEY \& SONS LTD}, address = {THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND}, abstract = {

BACKGROUND: Volatile blends of five developing and five ripening stages of mango (Mangifera indica L. cv. Alphonso) were investigated along with those of flowers and leaves. Raw and ripe fruits of cv. Sabia were also used for comparison. RESULTS: A total of 55 volatiles belonging to various chemical classes such as aldehydes, alcohols, mono- and sesquiterpene hydrocarbons, lactones and furanones were identified. In all Alphonso tissues monoterpenes quantitatively dominated, with 57-99\% contribution; in particular, (Z)-ocimene was found in the highest amount. Ripeness was characterized by the de novo appearance of lactones and furanones in the blend of monoterpenes. Sabja was distinguished by the abundance of monoterpene hydrocarbons in the raw fruit, and that of sesquiterpene hydrocarbons and their derivatives in the ripe stage. CONCLUSION: Various stages of the Alphonso fruit during transition from flower to ripe fruit are characterized by unique volatile signatures that are distinguished from each other by the qualitative and quantitative appearance of different volatile compounds. Thus volatiles can be highly informative markers while studying the development and ripening of mango. (C) 2009 Society of Chemical Industry

}, keywords = {Deogad, Gas chromatography, Mangifera indica, mango products, ripening indicator, Sabja}, issn = {0022-5142}, doi = {10.1002/jsfa.3692}, author = {Pandit, Sagar S. and Kulkarni, Ram S. and Chidley, Hemangi G. and Giri, Ashok P. and Pujari, Keshav H. and Koellner, Tobias G. and Degenhardt, Joerg and Gershenzon, Jonathan and Gupta, Vidya S.} } @article { ISI:000261768700023, title = {Click synthesis of isomeric compounds for assessing the efficiency of the bifurcated Br center dot center dot center dot NO2 synthon}, journal = {Crystengcomm}, volume = {11}, number = {1}, year = {2009}, month = {OCT}, pages = {143-150}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report herein the extention of the azide-alkyne {\textquoteleft}{\textquoteleft}click reaction{\textquoteright}{\textquoteright} to crystal engineering and synthesize a collection of isomeric compounds with modular positioning of Br and NO2 on a tricyclic template and crystal structural analyses of the derived isomers. It is quite remarkable to notice that none of the isomers displayed the bifurcated three-center NO2 center dot center dot center dot Br supramolecular synthon in their crystal structures

}, issn = {1466-8033}, doi = {10.1039/b809985e}, author = {Ramana, C. V. and Chatterjee, Soumitra and Durugkar, Kulbhushan A. and Gonnade, Rajesh G.} } @article { ISI:000268231500057, title = {Combinatorial library of primaryalkylammonium dicarboxylate gelators: a supramolecular synthon approach}, journal = {Langmuir}, volume = {25}, number = {15}, year = {2009}, month = {AUG}, pages = {8742-8750}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Following the supramolecular synthon approach, a combinatorial library comprising 35 organic salts derived from 7 dicarboxylic acids (malonic, succinic-, adipic, L-tartaric-, maleic-, phthalic-, and isophthalicacid) and 5 primaryalkyl amines Me-(CH2)(n)-NH2 (n = 11 - 15) was prepared and scanned for gelation. About 66\% of the salts in the combinatorial library were found to show moderate to good gelling ability in various polar and nonpolar solvents including commercial fuels such as petrol. The majority of the salts having a rigid, unsaturated anionic backbone (maleate, phthalate, and isophthalate) did not show gelation; only the corresponding hexadecylammonium salts showed gelation. Some of the representative gels were characterized by rheology, small-angle neutron scattering (SANS), optical microscopy (OM), and scanning electron microscopy (SEM). Single-crystal structures of two gelator and two nongelator salts were also discussed in the context of supramolecular synthon and structure-property correlation.

}, issn = {0743-7463}, doi = {10.1021/la9001362}, author = {Sahoo, Pathik and Adarsh, N. N. and Chacko, George E. and Raghavan, Srinivasa R. and Puranik, Vedavati G. and Dastidar, Parthasarathi} } @article { ISI:000271252000017, title = {Concise enantioselective synthesis of (+)-decarestrictine L via proline-catalyzed sequential alpha-aminooxylation and Horner-Wadsworth-Emmons olefination}, journal = {Tetrahedron-Asymmetry}, volume = {20}, number = {18}, year = {2009}, month = {SEP}, pages = {2173-2177}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short enantioselective synthesis of (+)-decarestrictine L, a cholesterol biosynthesis inhibitor metabolite, is described using a D-proline catalyzed sequential alpha-aminooxylation and a Horner-Wadsworth-Emmons olefination. (C) 2009 Elsevier Lid All rights reserved

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2009.08.026}, author = {Rawat, Varun and Chouthaiwale, Pandurang V. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000267115600005, title = {Consequence of hazards on some petroleum storage tanks and model for off-site emergency plan}, journal = {Disaster Advances}, volume = {2}, number = {2}, year = {2009}, month = {APR}, pages = {36-40}, publisher = {DISASTER ADVANCES}, address = {SECTOR AG-80, SCHEME NO 54, VIJAY NAGAR, A B RD, INDORE, 452010, INDIA}, abstract = {

Explosions, fire and the release of toxic gase cause deaths and injuries to workers and the public, resulting in the evacuation of communities and adversely affecting the environment as a whole. The primary objective of the off-site emergency plan for a hazardous installation is the prevention of accidents. The prevention of accidents involving hazardous substances is the concern of everyone. The poolfire from a petroleum storage tank leads to fatal consequences. This paper highlights some salient features of the emergency scenario from four petroleum storage tanks situated in Budge Budge area, 24 Pgs(S), West Bengal, which ultimately lead to poolfire with enormous heat wave all around and their consequence analysis, affected areas, rescue and evacuation plans, communication and public information systems, roles and responsibilities of the district emergency authority, police, fire and medical authorities.

}, keywords = {MAH industries, Off-site emergency plan, Petroleum storage tank, Poolfire, radial distance}, issn = {0974-262X}, author = {Biswajit, Ruj and Chattaraj, Pratim Kumar and Rehman, I and Ray, B. C.} } @article { ISI:000264437500012, title = {Copper-based catalysts for water gas shift reaction: influence of support on their catalytic activity}, journal = {Catalysis Today}, volume = {141}, number = {1-2}, year = {2009}, note = {18th National Symposium and Indo-US Seminar on Catalysis, Indian Inst Petroleum, Dehradun, INDIA, APR 16-18, 2007}, month = {MAR}, pages = {72-76}, publisher = {Catalysis Soc India; Petrotech Soc; Indo US Sci \& Technol Forum}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Three copper containing catalysts supported on ceria and mixed oxides of ceria with zirconia and titania were prepared by co-precipitation method and their catalytic activity was tested for water gas shift (WGS) reaction. High surface area (\>100m(2)/g) mixed oxides were obtained following the present method of preparation. The catalysts were characterized by XRD, H(2)-temperature programmed reduction (TPR), UV-vis and XPS. Catalytic activity was evaluated for water gas shift reaction in the 200-400 degrees C temperature range, The gas hourly space velocity was varied from 5000 to 25,000h(-1) for better evaluation and comparison of their performance. The effect of CO(2) in the feed gas mixture on the WGS activity of these catalysts was also studied. Among the three catalysts studied, CuO-CeO(2)-ZrO(2) mixed oxide shows better activity, implying the influence of support. Characterization of the catalysts after WGS reaction was also carried out in order to investigate structure-property correlation. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {ceria, Ceria-titania, Ceria-zirconia, Co-precipitation, Copper, Water gas shift}, issn = {0920-5861}, doi = {10.1016/j.cattod.2008.06.026}, author = {Pradhan, S. and Reddy, A. Satyanarayana and Devi, R. N. and Chilukuri, Satyanarayana V.} } @article { ISI:000263216000054, title = {Cultivar relationships in mango based on fruit volatile profiles}, journal = {Food Chemistry}, volume = {114}, number = {1}, year = {2009}, month = {MAY}, pages = {363-372}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Aroma volatiles of mango (Mangifera indica L.) determine consumer acceptability and influence selection, whilst breeding. To assess their variety, composition and possible impact on cultivar relationships, volatile blends of 22 Indian and five non-Indian cultivars were investigated using solvent extraction and gas chromatography. Totally 84 volatiles belonging to various chemical classes were detected. Based on the Cumulative Occurrence of members of these classes, cultivars were grouped as monoterpene or sesquiterpene dominant. a-Pinene, beta-myrcene and beta-caryophyllene were found in all 27 cultivars. For ordination, common compounds with high (relative) concentration provided quantitative characters, whereas the rare and lesser ones provided qualitative (binary) characters; non-Indian cultivars separated from Indian ones but displayed close relations within their groups. In conclusion, mango flavour is dominated qualitatively as well as quantitatively by terpene hydrocarbons; ancient selection of mango cultivars is hinted to be driven by different aroma characters in different parts of the world. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Flavour, GC-MS, Mangifera indica, Multivariate analysis, Ordination}, issn = {0308-8146}, doi = {10.1016/j.foodchem.2008.09.107}, author = {Pandit, Sagar S. and Chidley, Hemangi G. and Kulkarni, Ram S. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article { ISI:000271067400004, title = {Cu(OTf)(2)-catalyzed alpha-halogenation of ketones with 1,3-dichloro-5,5 {\textquoteleft}-dimethylhydantoin and N-bromosuccinimide}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry including Medicinal Chemistry}, volume = {48}, number = {10}, year = {2009}, month = {OCT}, pages = {1424-1430}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

Copper(II) triflate catalyses efficiently the alpha-halogentation of aryl or alkyl ketones with 1,3-dichloro-5,5{\textquoteright}-dimethyl-hydantoin and N-bromosaccinimde to give the corresponding alpha,alpha-dichloroketones and alpha-bromoketones in high yield with excellent product selectivity.

}, keywords = {Bromination, Catalyst, chlorination, copper (II), Ketone, Lewis acid}, issn = {0376-4699}, author = {Jagdale, Arun R. and Chouthaiwale, Pandurang V. and Sudalai, Arumugam} } @article { ISI:000263373600066, title = {Dendritic effect of ligand-coated nanoparticles: enhanced apoptotic activity of silica-berberine nanoconjugates}, journal = {Langmuir}, volume = {25}, number = {4}, year = {2009}, month = {FEB}, pages = {2339-2347}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We describe the synthesis and biological characterization of a novel prototype, namely, silica nanoconjugates bearing a covalently linked berberine, a plant alkaloid known to have antiproliferative activity. The effect of synthesized nanoconjugates on cell proliferation, the cell cycle profile, and apoptosis in the human cervical carcinoma cell line (HeLa), human hepatocellular liver carcinoma cell line (HepG2), and human embryonic kidney (HEK) 293T cell line has been studied and compared with the results obtained for free berberine. Our results show that all the nanoconjugates display higher antiproliferative activity than free berberine. The ability of these nanoconjugates to inhibit cellular proliferation is mediated by the cell cycle arrest at the G1 phase. Moreover, silica nanoconugates caused selective apoptotic arrest with a higher efficiency than free berberine followed by apoptotic cell death as shown by quantitative fluorescence-activated cell sorting analyses. Efficiency of the nanoconjugates increases upon an increase in the linker chain length, demonstrating the distinct role of the spacer chain that conjugates nanoparticles and ligands. The actual reason to show enhanced efficiency by the nanoconjugates has not been elucidated in the present study; however, we hypothesize that an increase in local concentration due to the confinement of a ligand on the nanosurface ({\textquoteright}{\textquoteright}dendritic{\textquoteright}{\textquoteright} effect) might have led to the observed effect.

}, issn = {0743-7463}, doi = {10.1021/la802761b}, author = {Halimani, Mahantappa and Chandran, S. Prathap and Kashyap, Sudhir and Jadhav, V. M. and Bhagavatula L. V. Prasad and Hotha, Srinivas and Maiti, Souvik} } @article { ISI:000281760100214, title = {Development of mycoinsecticide for the control of insect pests: comparative evaluation of metarhizium isolates to identify strains for commercialization}, journal = {New Biotechnology}, volume = {25}, number = {1}, year = {2009}, month = {SEP}, pages = {S88-S89}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {1871-6784}, doi = {10.1016/j.nbt.2009.06.360}, author = {Deshpande, Mukund V. and Kulkarni, Shuklangi A. and Ghormade, Vandana and Kapoor, Manisha and Chavan, Santosh B. and Kulkarni, Grish and Shouche, Yogesh} } @article { ISI:000262657300005, title = {Direct H-2-to-H2O2 oxidation over highly active/selective Br-F-Pd/Al2O3 catalyst in aqueous acidic medium: Influence of process conditions on the H2O2 formation}, journal = {Applied Catalysis A-General}, volume = {352}, number = {1-2}, year = {2009}, month = {JAN}, pages = {35-42}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The influence of the O-2/H-2 mote ratio in the gaseous feed and also those of other reaction conditions [viz. concentration of H3PO4 (0-5 mol/dm(3)). temperature (5-50 degrees C, gas (H-2 and O-2) space velocity (5.8-23.4 h(-1)) and reaction time (0.1-8 h)] on the H2O2 formation in the H-2-to-H2O2 oxidation over the Br(1 wt\%)-F(1 wt\%)-Pd(5 wt\%)/Al2O3 catalyst in an aqueous acidic (H3PO4) medium have been thoroughly investigated. The effects of the O-2/H-2 ratio, reaction temperature and acid concentration on the destruction of H2O2 by its decomposition and/or hydrogenation reactions over the catalyst in the acidic reaction medium have also been studied. The net H2O2 formation (H2O2 yield) over the catalyst passed through a maximum with increasing the acid concentration, the temperature or the O-2/H-2 feed ratio. However, it decreased markedly with increasing the gas space velocity or the reaction period. The H2O2 decomposition and hydrogenation activities of the catalyst increased appreciably with increasing the reaction temperature and decreased with increasing the acid concentration. The H2O2 destruction during the H-2-to-H2O2 oxidation increased with increasing the concentration of H-2 (relative to that of O-2) due to the increased H2O2 hydrogenation rate over the catalyst. The net H2O2 formation in the H-2-to-H2O2 oxidation decreased sharply with increasing the initial amount of H2O2 present in the reaction mixture. The presence of H2O2 and the higher H-2/O-2 ratios have detrimental effects on the net formation of H2O2. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Br-F-Pd/Al2O3 catalyst, H2O2 decomposition, H2O2 hydrogenation, hydrogen oxidation, Hydrogen peroxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.09.028}, author = {Choudhary, Vasant R. and Jana, Prabhas} } @article { ISI:000264538000029, title = {Efficient formal synthesis of (S)-dapoxetine from enantiopure 3-hydroxy azetidin-2-one}, journal = {Tetrahedron}, volume = {65}, number = {12}, year = {2009}, month = {MAR}, pages = {2605-2609}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient formal synthesis of S-(+) dapoxetine starting from 3-hydroxy azetidin-2-one is described. The intermediate (S)-3-(dimethyl amino)-3-phenylpropan-1-ol was synthesized in enantiopure form starting with 3-hydroxy azetidin-2-one in seven steps. (c) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Azetidin 2 ones, beta-Lactams, Enantioselective synthesis, reduction, Staudinger reaction}, issn = {0040-4020}, doi = {10.1016/j.tet.2008.11.042}, author = {Chincholkar, Pinak M. and Kale, Ajaykumar S. and Gumaste, Vikas K. and Deshmukh, Abdul Rakeeb A. S.} } @article { ISI:000268138200061, title = {Electronic structure and catalytic study of solid solution of GaN in ZnO}, journal = {Chemistry of Materials}, volume = {21}, number = {13}, year = {2009}, month = {JUL}, pages = {2973-2979}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Solid solutions of GaN in ZnO (Zn1-zGaz)(O1-xNx) (x and z \<= 0.15) have been prepared by simple solution combustion method, Except for minor changes in the lattice contraction, no significant change in the Wurtzite structure was observed. Raman and secondary ion mass spectrometry results show the direct Zn-N and Ga-N bonds in (Zn1-zGaz)(O1-xNx). Visible light absorption and XPS results demonstrate that N 2p states of nitride occupy the states above the O 2p valence band, and hence a change in optical band gap reduction occurs to similar to 2.5 eV from 3.37 eV for ZnO. Significant nitrogen fixation catalytic activity through NH3 formation has been observed at ambient pressure oil virgin (Zn1-zGaz)(O1-xNx) material, indicating its potential as a catalyst.

}, issn = {0897-4756}, doi = {10.1021/cm900682q}, author = {Mapa, Maitri and Thushara, K. S. and Saha, Biswajit and Chakraborty, Purushottam and Janet, C. M. and Viswanath, R. P. and Nair, C. Madhavan and Murty, K. V. G. K. and Gopinath, Chinnakonda S.} } @article { ISI:000272089600022, title = {Enantioselective synthesis of decarestrictine J}, journal = {Tetrahedron Letters}, volume = {50}, number = {51}, year = {2009}, month = {DEC}, pages = {7188-7190}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient total synthesis of decarestrictine J has been achieved using ring-closing metathesis and Yamaguchi esterification as key steps. The stereogenic centres were generated by means of iterative hydrolytic kinetic resolution (HKR) of racemic epoxides. (c) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Decanolides, epoxides, Hydrolytic kinetic resolution, Ring-closing metathesis, Yamaguchi esterification}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.10.035}, author = {Chowdhury, Partha Sarathi and Gupta, Priti and Kumar, Pradeep} } @article { ISI:000264236700037, title = {Exploration of click reaction for the synthesis of modified nucleosides as chitin synthase inhibitors}, journal = {Bioorganic \& Medicinal Chemistry}, volume = {17}, number = {6}, year = {2009}, month = {MAR}, pages = {2433-2440}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Click reaction approach toward the synthesis of two sets of novel 1,2,3-triazolyl linked uridine derivatives 19a-19g and 21a-21g was achieved by Cu(I)-catalyzed 1,3-dipolar cycloaddition of 5{\textquoteright}-azido-5{\textquoteright}-deoxy-2{\textquoteright},3{\textquoteright}-O-(1-methylethylidene) uridine (17) with propargylated ether of phenols 18a-18g and propargylated esters 20a-20g. Structure of one of the representative compound 19d was unambiguously confirmed by X-ray crystallography. Chitin synthase inhibition study of all these compounds 19a-19g and 21a-21g was carried out to develop antifungal strategy. Compounds 19d, 19e, 19f, and 21f were identified as potent chitin synthase inhibitors by comparing with nikkomycin. Compounds 19a, 19b, 19c, 19d, 21a, and 21b showed good antifungal activity against human and plant pathogens. Compounds 19a, 19b, 19f, 21c, 21f, and 21g were identified as lead chitin synthase inhibitors for further modi. cations by comparing results of inhibition of growth, \% germ tube formation and chitin synthase activity. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {1, 2, 3-dipolar cycloaddition, 3-Triazole, 4-Disubstituted-1, 5 {\textquoteleft}-Azidouridine, Antifungal compounds, Chitin synthase activity, Click reaction, Uridine nucleosides}, issn = {0968-0896}, doi = {10.1016/j.bmc.2009.02.019}, author = {Chaudhary, Preeti M. and Chavan, Sayalee R. and Shirazi, Fazal and Razdan, Meenakshi and Nimkar, Prachi and Maybhate, Shailaja P. and Likhite, Anjali P. and Gonnade, Rajesh G. and Hazra, Braja G. and Deshpande, Mukund V. and Deshpande, Sunita R.} } @article { ISI:000271841900023, title = {First asymmetric total synthesis of aspinolide A}, journal = {Tetrahedron Letters}, volume = {50}, number = {50}, year = {2009}, month = {DEC}, pages = {7018-7020}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The first total synthesis of aspinolide A has been achieved using ring-closing metathesis as a key step. The stereogenic centers were generated by means of hydrolytic kinetic resolution (HKR) of racemic epoxides. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Decanolides, epoxides, Hydrolytic kinetic resolution, Ring-closing metathesis}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.09.151}, author = {Chowdhury, Partha Sarathi and Gupta, Priti and Kumar, Pradeep} } @article { ISI:000266693600010, title = {Formal synthesis of (-) anisomycin via organocatalysis}, journal = {Arkivoc}, year = {2009}, month = {JAN}, pages = {88-94}, publisher = {ARKAT USA INC}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

An efficient formal synthesis of (-) anisomycin (1), a potent antibiotic agent, has been achieved in good yields and excellent diastereoselectivity. The key steps are proline-catalyzed sequential alpha-amination or alpha-aminoxylation of aldehyde 2 followed by tandem Horner-Wadsworth-Emmons olefination.

}, keywords = {alpha-Amination, alpha-aminoxylation, anisomycin, olefination, Proline}, issn = {1424-6376}, author = {Chouthaiwale, Pandurang V. and Kotkar, Shriram P. and Sudalai, Arumugam} } @article { ISI:000269988600011, title = {Fullerenol-cytotoxic conjugates for cancer chemotherapy}, journal = {ACS Nano}, volume = {3}, number = {9}, year = {2009}, month = {SEP}, pages = {2505-2514}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In the present study, we report the novel application of polyhydroxylated fullerenes (fullerenols) in cancer drug delivery. The facile synthetic procedure for generating multiple hydroxyl groups on the fullerene cage offers scope for high drug loading in addition to conferring hydrophilicity. Doxorubicin, a first line cancer chemotherapeutic, was conjugated to fullerenols through a carbamate linker, achieving ultrahigh loading efficiency. The drug-fullerenol conjugate was found to be relatively stable in phosphate buffer saline but temporally released the active drug when incubated with tumor cell lysate. The fullerenol-doxorubicin conjugate suppressed the proliferation of cancer cell-lines in vitro through a G2-M cell cycle block, resulting in apoptosis. Furthermore, in an in vivo murine tumor model, fullerenol-doxorubicin exhibited Comparable antitumor efficacy as free drug without the systemic toxicity of free doxorubicin. Additionally, we demonstrate that the fullerenol platform can be extended to other chemotherapeutic agents, such as the slightly water-soluble cisplatin, and can emerge as a new paradigm in the management of cancer.

}, keywords = {chemotherapy, doxorubicin, drug delivery, fullerenol, nanoparticle}, issn = {1936-0851}, doi = {10.1021/nn900318y}, author = {Chaudhuri, Padmaparna and Paraskar, Abhimanyu and Soni, Shivani and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article {42757, title = {Functional delivery of siRNA in mice using dendriworms}, journal = {ACS Nano}, volume = {3}, year = {2009}, month = {SEP}, pages = {2495-2504}, doi = {10.1021/nn900201e}, author = {Agrawal, Amit C. and Min, Dal-Hee and Singh, Neetu and Zhu, Haihao and Birjiniuk, Alona and von Maltzahn, Geoffrey and Harris, Todd J. and Xing, Deyin and Woolfenden, Stephen D. and Sharp, Phillip A. and Charest, Alain and Bhatia, Sangeeta N.} } @article { ISI:000263319900006, title = {Highly stereoselective approach toward the synthesis of the macrolactone core of amphidinolide W}, journal = {Tetrahedron Letters}, volume = {50}, number = {7}, year = {2009}, month = {FEB}, pages = {755-758}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The diastereoselective synthesis of the macrolactone core of amphidinolide W was successfully accomplished using Evans{\textquoteright} asymmetric alkylation, Aldol reaction, Julia-Kocienski olefination, and Kita{\textquoteright}s macrocyclization protocol. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Amphidinolide W, Evans aldol, Evans alkylation, Julia-Kocienski olefination, Kita{\textquoteright}s macrocyclization}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.11.088}, author = {Mohapatra, Debendra K. and Chatterjee, Bhaskar and Gurjar, Mukund K.} } @article { ISI:000267625000020, title = {Hydroesterification of 2-vinyl-6-methoxynaphthalene using palladium complexes containing chelating nitrogen ligands}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {307}, number = {1-2}, year = {2009}, month = {JUL}, pages = {134-141}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Hydroesterification of 2-vinyl-6-methoxynaphthalene (VMN) to methyl ester of 6-methoxy naphthyl propionic acid (ester of naproxen) has been investigated using palladium complexes containing the chelating N(boolean AND)O and N(boolean AND)N ligands (pyridine-2-carboxylate, 2-acetylpyridine, 2-pyridine-carboxaldehyde, and bipyridine) as catalysts. Palladium complex containing 2-acetylpyridine as the ligand was found to be superior to other Pd-complexes. Both acid and halide promoters were necessary for high activity and selectivity. As an acid promoter, benzenesulfonic acid was found to be more effective compared to p-toluenesulfonic acid. Formation of ether 2-methoxy-6-(1-methoxyethyl)naphthalene and a polymer of VMN was observed in all the reactions. It was observed that active catalytic species generated during carbonylation reaction was responsible for the polymer formation. The effect of various parameters such as solvents, CO pressure, and alcohols on the catalytic activity as well as the selectivity was investigated. The turnover frequency using the complex Pd(acpy)(PPh(3))(OTs)(2) (acpy = 2-acetylpyridine) catalyst was found to be 42 h(-1), which is the highest for the hydroesterification of VMN. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Carbonylation, Hydroesterification, Naproxen, Palladium complex, Polymer of VMN, Promoters}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.03.021}, author = {Atla, Shashi B. and Kelkar, Ashutosh A. and Chaudhari, Raghunath V.} } @article { ISI:000271103500017, title = {Hydroformylation of 1,4-diacetoxy-2-butene using HRh(CO)(PPh3)(3) tethered on alumina as a catalyst: kinetic study}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {21}, year = {2009}, month = {NOV}, pages = {9479-9489}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydroformylation of 1,4-diacetoxy-2-butene (DAB) was studied using [HRh(CO)(PPh3)(3)] complex catalyst tethered on alumina using phosphotungstic acid (PTA) as an anchoring agent, with the aim to understand the product distribution, selectivity, and intrinsic kinetics. It was observed that with the tethered heterogeneous catalyst a simultaneous hydroformylation followed by deacetoxylation steps was possible, which is relevant for combining two steps in the sequence of synthesis of vitamin-A intermediate [2-formyl-4-acetoxy butene (FAB)]. P-31 cross-polarization magic angle spinning nuclear magnetic resonance (CP MAS NMR) and infrared (IR) instrumental techniques were found be the most effective techniques to establish the catalyst structure and true heterogeneity. On the basis of the spectroscopic evidence, we postulate the loss of a PPh3 group during tethering to give HRh(CO)(PPh3)(2)-PTA-Al2O3 as a heterogeneous complex catalyst. Experimental data on the concentration-time and CO/H-2 consumption-time profiles were obtained and the effects of DAB concentration, CO partial pressure, H-2 partial pressure, and catalyst loading were studied in a 50 mL stirred batch reactor over a temperature range of 338-358 K. The analysis of solid-liquid-gas mass transfer effects was investigated to ensure that the reaction was operating in the kinetic regime Various models were developed, and the best model was chosen by a model discrimination procedure. The agreement between the model prediction and the experimental data was found to be excellent. The activation energies for the hydroformylation and deacetoxylation steps were found to be 42.5 and 80.2 kJ/mol.

}, issn = {0888-5885}, doi = {10.1021/ie900269z}, author = {Chansarkar, Rashmi and Kelkar, Ashutosh A. and Chaudhari, Raghunath V.} } @article { ISI:000278806800025, title = {Identification of defensins employing recurrence quantification analysis and random forest classifiers}, journal = {Pattern Recognition and Machine Intelligence, Proceedings}, volume = {5909}, year = {2009}, note = {3rd International Conference on Pattern Recognition and Machine Intelligence, IIT Delhi, New Delhi, INDIA, DEC 16-20, 2009}, month = {DEC}, pages = {152-157}, publisher = {ISI Kolkata}, address = {HEIDELBERGER PLATZ 3, D-14197 BERLIN, GERMANY}, abstract = {

Defensins represent a class of antimicrobial peptides synthesized in the body acting against various microbes. In this paper we study defensins using a non-linear signal analysis method Recurrence Quantication Analysis (RQA). We used the descriptors calculated employing RQA for the classification of defensins with Random Forest Classifier. The RQA descriptors were able to capture patterns peculiar to defensins leading to an accuracy rate of 78.12\% using 10-fold cross validation.

}, isbn = {978-3-642-11163-1}, issn = {0302-9743}, author = {Karnik, Shreyas and Prasad, Ajay and Diwevedi, Alok and Sundararajan, V. and Jayaraman, Valadi K.}, editor = {Chaudhury, S. and Mitra, S. and Murthy, C. A. and Sastry, P. S. and Pal, S. K.} } @article { ISI:000278806800024, title = {Identification of N-glycosylation sites with sequence and structural features employing random forests}, journal = {Pattern Recognition and Machine Intelligence, Proceedings}, volume = {5909}, year = {2009}, note = {3rd International Conference on Pattern Recognition and Machine Intelligence, IIT Delhi, New Delhi, INDIA, DEC 16-20, 2009}, month = {DEC}, pages = {146-151}, publisher = {ISI Kolkata}, address = {HEIDELBERGER PLATZ 3, D-14197 BERLIN, GERMANY}, abstract = {

N-Glycosylation plays a very important role in various processes like quality control of proteins produced in ER, transport of proteins and in disease control. The experimental elucidation of N-Glycosylation sites is expensive and laborious process. In this work we build models for identification of potential N-Glycosylation sites in proteins based on sequence and structural features. The best model has cross validation accuracy rate of 72.81\%.

}, isbn = {978-3-642-11163-1}, issn = {0302-9743}, author = {Karnik, Shreyas and Mitra, Joydeep and Singh, Arunima and Kulkarni, B. D. and Sundarajan, V. and Jayaraman, Valadi K.}, editor = {Chaudhury, S. and Mitra, S. and Murthy, C. A. and Sastry, P. S. and Pal, S. K.} } @article { ISI:000268905100015, title = {Kinetics of arylation of 3-bromo-benzophenone with n-butylacrylate using NC palladacycle catalyst}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {309}, number = {1-2}, year = {2009}, month = {AUG}, pages = {111-116}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The kinetics of arylation of n-butylacrylate (n-BA) with 3-bromo-benzophenone (BBP) using a monomeric palladacycle complex [Pd(ppy)(PPh(3))(OTs)](ppy=2-phenylpyridine) catalyst has been studied. The effect of concentration of the substrate, base (NaOAc), and catalyst was studied at three different temperatures (413-433 K). The rate was found to be first order with respect to catalyst, first order tending to zero order with respect to n-butylacrylate and NaOAc concentrations. The rate passed through a maximum with variation of BBP concentration. The observed results have been explained on the basis of formation of Pd species (PdX(2), PdX(3)(-), PdX(4)(2-), and Pd(2)X(6)(2-)) which are inactive for the Heck reaction. Various empirical rate equations were considered to fit the rate data and the best fitting model has been selected. The rates predicted by model were found to be in good agreement with the observed experimental data. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Arylation, Heck reaction, kinetics, Palladacycle}, issn = {1381-1169}, doi = {10.1016/j.molcata.2009.05.003}, author = {Atla, Shashi B. and Rajurkar, Kalpendra B. and Kelkar, Ashutosh A. and Chaudhari, Raghunath V.} } @article { ISI:000270593200035, title = {Lombardo{\textquoteright}s reagent}, journal = {Synlett}, number = {15}, year = {2009}, month = {SEP}, pages = {2545-2546}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, issn = {0936-5214}, doi = {10.1055/s-0029-1217801}, author = {Chand, Hemender R.} } @article { ISI:000268500500025, title = {Magnesium oxide supported nano-gold: a highly active catalyst for solvent-free oxidation of benzyl alcohol to benzaldehyde by TBHP}, journal = {Catalysis Communications}, volume = {10}, number = {13}, year = {2009}, month = {JUL}, pages = {1738-1742}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nano-size gold particles deposited on MgO by the homogeneous deposition- precipitation showed very high catalytic activity with nearly 100\% conversion of benzyl alcohol in a short reaction period (0.5 h) and more over showed excellent reusability in the process. Influence of the catalyst support (MgO, CaO, BaO, SrO, Al(2)O(3), Ga(2)O(3) and In(2)O(3)), method of gold deposition, Au loading and catalyst calcination temperature and also that of the reaction conditions (viz. reaction time and temperature) on the benzyl alcohol to benzaldehyde oxidation have been thoroughly investigated. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Alkaline earth oxides, Benzaldehyde, Benzyl alcohol, Gr.IIIa metal oxides, Oxidation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2009.05.020}, author = {Choudhary, Vasant R. and Dumbre, Deepa K.} } @article { ISI:000268022700058, title = {Magnetic and dielectric properties of nanophase manganese-substituted lithium ferrite}, journal = {Journal of Magnetism and Magnetic Materials}, volume = {321}, number = {19}, year = {2009}, month = {OCT}, pages = {3270-3273}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanocrystalline manganese-substituted lithium ferrites viz. Li0.5Fe2.5-xMnxO4 (2.5 \<= x \>= 0) were prepared by sol-gel autocombustion method. X-ray diffraction analysis confirmed that as the concentration of manganese increases the cubic phase changes to the tetragonal phase. The variation of saturation magnetization was studied as a function of manganese content. All the compositions indicate that they are ferrimagnetic in nature. The dielectric constant, dielectric loss tangent and ac conductivity of all samples were measured at room temperature as a function of frequency. These parameters decrease with increase in frequency for all of the samples. The substitution of manganese plays an important role in changing the structural and magnetic properties of these ferrites. The compositional variation of dielectric constant and d.c. resistivity shows an inverse trend of variation with each other. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {dielectric constant, Ferrite, Magnetization, X-ray diffraction}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2009.05.074}, author = {Hankare, P. P. and Patil, R. P. and Sankpal, U. B. and Jadhav, S. D. and Mulla, Imtiaz S. and Jadhav, K. M. and Chougule, B. K.} } @article { ISI:000263397900005, title = {Manipulation of magnetic nanostructures through low temperature metal-oxygen chemistry: Co/CoO exchange biased nanodonuts and Co nanotips}, journal = {Solid State Communications}, volume = {149}, number = {7-8}, year = {2009}, month = {FEB}, pages = {277-280}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Dense nanodonut and nanotip type morphologies are shown to self-evolve in Ultrathin cobalt films during growth under Vacuum, depending oil the level of oxygen incorporation and temperature. The nanodonut morphology forms at room temperature and the corresponding magnetic hysteresis shows exchange bias (similar to 35 Oe shift along the field axis), which is attributed to the presence of CoO and its exchange Coupling with cobalt. The morphology evolves into nanotip features with increase of growth temperature, with Concurrent elimination of the oxide component and exchange bias. (C) 2008 Elsevier Ltd. All rights reserved.

}, keywords = {Co/CoO, Magnetic film, self assembly, Vacuum evaporation}, issn = {0038-1098}, doi = {10.1016/j.ssc.2008.12.019}, author = {Phase, Deodatta and Choudhary, Ram Janay and Ganesan, V. and Reddy, V. Raghvendra and Gupta, Ajay and Selvi, N. and Kulkarni, Sneha and Ogale, Satishchandra} } @article { ISI:000266208900051, title = {Nanoparticle-mediated targeting of MAPK signaling predisposes tumor to chemotherapy}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {106}, number = {19}, year = {2009}, month = {MAY}, pages = {7957-7961}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

The MAPK signal transduction cascade is dysregulated in a majority of human tumors. Here we report that a nanoparticle-mediated targeting of this pathway can optimize cancer chemotherapy. We engineered nanoparticles from a unique hexadentate-polyD, L-lactic acid-co-glycolic acid polymer chemically conjugated to PD98059, a selective MAPK inhibitor. The nanoparticles are taken up by cancer cells through endocytosis and demonstrate sustained release of the active agent, resulting in the inhibition of phosphorylation of downstream extracellular signal regulated kinase. We demonstrate that nanoparticle-mediated targeting of MAPK inhibits the proliferation of melanoma and lung carcinoma cells and induces apoptosis in vitro. Administration of the PD98059-nanoparticles in melanoma-bearing mice inhibits tumor growth and enhances the antitumor efficacy of cisplatin chemotherapy. Our study shows the nanoparticle-mediated delivery of signal transduction inhibitors can emerge as a unique paradigm in cancer chemotherapy.

}, keywords = {cancer, Signal transduction}, issn = {0027-8424}, doi = {10.1073/pnas.0902857106}, author = {Basu, Sudipta and Harfouche, Rania and Soni, Shivani and Chimote, Geetanjali and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article { ISI:000271819300006, title = {Natural yeast flora of different varieties of grapes used for wine making in India}, journal = {Food Microbiology}, volume = {26}, number = {8}, year = {2009}, month = {DEC}, pages = {801-808}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

The natural Saccharomyces and non-Saccharomyces yeast flora present on the grape berries significantly affect wine production. Six grape varieties, Bangalore blue, Zinfandel, Cabernet, Chenin Blanc, Sauvignon Blanc and Shiraz are being used in India for wine making. The yeast diversity was studied on the basis of morphological, colony, physiological characteristics and 5.8S-ITS sequencing of rDNA of the isolates. Eleven different species belonging to seven genera were identified as: Candida azyma, Candida quercitrusa, Debaryomyces hansenii, Hanseniaspora guilliermondii, Hanseniaspora viniae, Hanseniaspora uvarum. Issatchenkia orientalis, Issatchenkia terricola, Pichia membranifaciens, Saccharomyces cerevisiae and Zygoascus steatolyticus. H. guilliermondii was the predominant species while S. cerevisiae was observed occasionally in the six vine varieties. For the first time, C. azyma was isolated from Bangalore blue and Cabernet varieties grown in different localities. This association may be attributed to the change in cropping pattern from sugarcane to viticulture in the vine growing regions and the known association of C. azyma with sugarcane phylloplane. Further analysis of the indigenous strains and the qualitative and quantitative changes in the flora during fermentation will be useful to understand wine quality and to design preservation strategies to control wine spoilage. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {5.8S-ITS sequence, Identification, Physiological, Wine yeasts}, issn = {0740-0020}, doi = {10.1016/j.fm.2009.05.005}, author = {Chavan, Pradnya and Mane, Sarika and Kulkarni, Girish and Shaikh, Shamim and Ghormade, Vandana and Nerkar, Devidas P. and Shouche, Yogesh and Deshpande, Mukund V.} } @article { ISI:000263365600013, title = {NC palladacycles in the Heck arylation of ethylene: synthesis, structure and their reactivity}, journal = {Journal of Organometallic Chemistry}, volume = {694}, number = {5}, year = {2009}, month = {MAR}, pages = {683-690}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Monomeric cyclopalladated complexes with NC coordination using ligands 2-phenylpyridine, 2-phenylquinoline, 8-methylquinoline have been synthesized and the structures have been determined by single crystal X-ray structure analysis. The crystal structures of monomeric palladacycles prepared using benzophenone oxime, and 2-phenylpyridine have also been determined. The use of these complexes in the Heck arylation of ethylene with 2-bromo-6-methoxynaphthalne (BMN) to give 2-vinyl-6-methoxynapthalene which is an intermediate for the synthesis of anti-inflammatory drug Naproxen has been examined and also arylation of ethylene with 3-bromo-benzophenone and 4-bromo-isobutylbenzene was investigated. These palladacycles with NC coordination show excellent catalytic activity with a TOF \> 4000 h (1). (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {alpha-Aryl propionic acids, Arylation, Palladacycle}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2008.11.065}, author = {Atla, Shashi B. and Kelkar, Ashutosh A. and Puranik, Vedavati G. and Bensch, Wolfgang and Chaudhari, Raghunath V.} } @article { ISI:000266447600055, title = {Nitric oxide reduction with ethanol on palladium surfaces: a molecular beam study}, journal = {Journal of Physical Chemistry C}, volume = {113}, number = {22}, year = {2009}, month = {JUN}, pages = {9814-9819}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nitric oxide (NO) reduction with ethanol has been carried out with molecular beam instruments in order to understand the influence of ethanol blended gasoline on NO reduction. Maximum NO reduction and nitrogen production was observed between 500 and 600 K. Oxidation products, CO, CO(2), and H(2)O were also observed. Beam switching experiments have been performed between fuel-rich and fuel-lean compositions to demonstrate that the NO reduction can be managed under net oxidizing conditions on Pd surfaces. Nitrogen production only occurs transiently on the relatively clean Pd surface in the oxygen-rich condition due to slow build up and blockage of the reaction by surface oxygen atoms. This shows the need to maintain relatively oxygen free surfaces to manage NO reduction under net-oxidizing conditions by beam oscillation between fuel-rich and fuel-lean compositions.

}, issn = {1932-7447}, doi = {10.1021/jp902017c}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S. and Counsell, Jonathan and Gilbert, Lee and Bowker, Michael} } @article { ISI:000266674700038, title = {Novel foldamer structural architecture from cofacial aromatic building blocks}, journal = {Chemical Communications}, number = {23}, year = {2009}, month = {MAY}, pages = {3446-3448}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication demonstrates the utility of peri-substituted 1,8-diphenylnaphthalene as an effective building block for the construction of novel conformationally ordered synthetic oligomers displaying cofacial structural features.

}, issn = {1359-7345}, doi = {10.1039/b822113h}, author = {Prabhakaran, Panchami and Puranik, Vedavati G. and Chandran, Jima N. and Rajamohanan, Pattuparampil R. and Hofmann, Hans-Joerg and Sanjayan, Gangadhar J.} } @article { ISI:000270126100012, title = {Organocatalytic enantioselective synthesis of beta-blockers: (S)-propranolol and (S)-naftopidil}, journal = {Tetrahedron-Asymmetry}, volume = {20}, number = {15}, year = {2009}, month = {AUG}, pages = {1767-1770}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of beta-adrenergic blockers (S)-propranolol and (S)-naftopidil with \> 98\% ee using an L-proline-catalyzed alpha-aminoxylation of an aldehyde as a key step is described. (c) 2009 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2009.07.002}, author = {Panchgalle, Sharad P. and Gore, Rohitkumar G. and Chavan, Subhash P. and Kalkote, Uttam R.} } @article { ISI:000271103500016, title = {Oxidation of benzyl alcohol to benzaldehyde by tert-butyl hydroperoxide over nanogold supported on TiO2 and other transition and rare-earth metal oxides}, journal = {Industrial \& Engineering Chemistry Research}, volume = {48}, number = {21}, year = {2009}, month = {NOV}, pages = {9471-9478}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Liquid-phase oxidation of benzyl alcohol to benzaldehyde by tertiary butyl hydroperoxide (at 95 degrees C) over nanogold supported oil TiO2 and other transition-metal oxides (viz, MnO2, Fe2O3, CoOx, NiO, CuO, ZnO, and ZrO2) or rare-earth oxides (viz, La2O3, Sm2O3, Eu2O3, and Yb2O3) by the homogeneous deposition-precipitation (HDP) method has been investigated. The Au/TiO2 catalyst, prepared using the HDP method, showed high activity and selectivity in the reaction. The ZrO2-Supported nanogold catalyst (HDP) also showed very good performance. The Au/TiO2 catalyst that was prepared using the deposition-precipitation (DP) method, however, showed poor catalytic activity, mostly because of its much-lower gold loading and/or lower Au3+/Au-0 ratio. Irrespective of the catalyst preparation method, the catalytic activity increased as the gold loading increased. The gold deposition method strongly influenced the amount of gold that was deposited on TiO2, the gold particle size distribution, and also the surface Au3+/Au-0 ratio; using the HDP method, the gold deposition was much larger, the gold particle size was smaller, the gold particle size distribution was much narrower, and the Au3+/Au-0 ratio was higher. Both the metallic and ionic gold species (Au-0 and Au3+) are present in the Au/TiO2 catalyst. However, the Au3+ species are mostly responsible for the high catalytic activity in the oxidation process.

}, issn = {0888-5885}, doi = {10.1021/ie801883d}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Bhargava, Suresh Kumar} } @article { ISI:000264647800005, title = {Physico-chemical, photo-catalytic and O-2-adsorption properties of TiO2 nanotubes coated with gold nanoparticles}, journal = {Journal of Photochemistry and Photobiology A-Chemistry}, volume = {203}, number = {1}, year = {2009}, month = {MAR}, pages = {24-31}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Gold-containing titania nanotubes (Au/NT) were found to display higher activity for photooxidation of acetaldehyde, as compared to corresponding gold-free nanotubes and also a Degussa P-25 catalyst. Besides CO2 as a major reaction product, small amounts of H-2, CH4, CO, H2O and CH3COOH were also formed, irrespective of the catalyst employed. High-resolution TEM examination showed that most of the gold particles in Au/NT were of 1.5-5 nm size, distributed both within and at outside surface of the nanotubes. Some larger size (10-70 run) clusters were also seen at the external surfaces, particularly in the samples calcined at an elevated temperature. The temperature-programmed desorption measurements revealed that, compared to P-25 TiO2, a significant entrapment of O-2 occurred at two distinct tubular sites of NT samples, corresponding activation energy of desorption (E,) being around 36 and 41 kcal mol(-1). On the other hand, gold nanoparticles in Au/NT served as independent low-energy (E-a = 26 kcal mol(-1)) sites for adsorption/activation of O-2. These adsorptive properties of TiO2 and Au were lost completely on calcination, thus revealing a crucial role played by the particle size. In situ IR spectroscopy results showed that room-temperature exposure to acetaldehyde + air gave rise to a molecularly bound state, i.e. CH3CHOad, over both NT and Au/NTsamples, which in turn transformed quickly to yield certain acetate (CH3COOad-) and formate (HCOOad-) type transient species with the involvement of the surface OH groups. The decomposition and oxidation of these surface species with the help of O-2(-), O-ad and hydroxyl ion radicals (OH-) formed at photo-excited Au/NT interfaces led to the reaction products mentioned above. We conclude that, besides electron-hole charge separation, the adsorptive properties of host matrix and nanosize gold may together play a significant role in deciding the photo-catalytic properties of Au/TiO2. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Acetaldehyde oxidation, Gold co-catalyst, O-2-adsorption, Photo-catalytic activity, TiO2 nanotubes}, issn = {1010-6030}, doi = {10.1016/j.jphotochem.2008.12.013}, author = {Malwadkar, Sachin S. and Gholap, Ramkrishna S. and Awate, Shobhana V. and Korake, Prakash V. and Chaskar, Manohar G. and Gupta, Narendra M.} } @article {University Grant Commission (UGC)}, title = {Poly(amide-imide)-silica gel hybrids: synthesis and characterization}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {46}, number = {7}, year = {2009}, month = {MAY}, pages = {PII 909739248}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

{Several poly(amide-imide)-silica gel hybrids containing metal salts were prepared by the sol-gel reaction. Poly(amide-imide)s were prepared by low temperature polycondensation reaction of trimellitic anhydride (TMA) and diisocyanates [

}, keywords = {2, 4-diphenyl thiophene, 5-Bis(4-carboxymethylene phenyl) 3, poly(amide-hydrazide)s, Thermal properties, Yamazaki{\textquoteright}s phosphorylation polycondensation}, issn = {1060-1325}, doi = {10.1080/10601320902797830}, author = {Avadhani, C. V. and Chujo, Y.} } @article {42456, title = {Polymeric ladderphanes}, journal = {Journal of the American Chemical Society}, volume = {131}, year = {2009}, month = {AUG}, pages = {12579{\textendash}12585}, abstract = {

A new class of polymers, which have a double-stranded polybinorbornene skeleton with multilayer planar oligoaryl linkers, defined as polymeric ladderphanes, are synthesized. The structures of these ladderphanes are determined by spectroscopic means. Photophysical studies and time-resolved fluorescence spectroscopic investigations reveal that there is a strong interaction between the chromophore linkers. Thus, Soret band splitting in the absorption spectrum of the polymer with porphyrin linker (12e), significant fluorescence quenching with oligoaryl linkers (12b-d), and excimer emission with a terphenylene-diethynylene linker (12a) are characteristic photophysical properties of these polymers. Scanning tunneling microscopy shows that polymers 12b and d exhibit a ladder-like morphology and form a supramolecular assembly leading to a two-dimensional ordered array on a highly oriented pyrolytic graphite surface.

}, doi = {10.1021/ja9035362}, author = {Chou, Chih-Ming and Lee, Shern-Long and Chen, Chih-Hsien and Biju, Akkattu T. and Wang, Hsian-Wen and Wu, Yi-Lin and Zhang, Guo-Fu and Yang, Kuang-Wei and Lim, Tsong-Shin and Huang, Min-Jie and Tsai, Po-Yu and Lin, Kin-Chuan and Huang, Shou-Ling and Chen, Chun-hsien and Luh, Tien-Yau} } @article { ISI:000259765600037, title = {Poly(o-anisidine) coatings on brass: synthesis, characterization and corrosion protection}, journal = {Current Applied Physics}, volume = {9}, number = {1}, year = {2009}, month = {JAN}, pages = {206-218}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Poly(o-anisidine) (POA) coatings were synthesized on brass by electrochemical polymerization of o-anisidine in aqueous salicylate solution by using cyclic voltammetry. These coatings were characterized by cyclic voltammetry, UV-visible absorption spectroscopy., Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The corrosion protection aspects of POA coatings on brass in aqueous 3\% NaCl solution were investigated by potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The potentiodynamic polarization measurements show that the POA coating has ability to protect the brass against corrosion. The corrosion potential was about 0.204 V versus SCE more positive for the POA coated brass than that of uncoated brass and reduces the corrosion rate of brass almost by a factor of 800. The corrosion behavior of the POA coatings was also investigated by EIS through immersion tests performed In aqueous 3\% NaCl solution. The evolution of the impedance parameters with the immersion time was studied and the results Show that the POA acts as a protective coating on brass against corrosion in 3\% NaCl solution. The water uptake and delamination area were also determined to further support the corrosion protection performance of the POA coating. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {brass, conducting polymers, Corrosion resistant coatings, cyclic voltammetry, Electrochemical impedance spectroscopy, Electrochemical polymerization, poly(o-anisidine)}, issn = {1567-1739}, doi = {10.1016/j.cap.2008.01.012}, author = {Chaudhari, Sudeshna and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000265814500012, title = {Polypyrrole functionalized with ferrocenyl derivative as a rapid carbon monoxide sensor}, journal = {Synthetic Metals}, volume = {159}, number = {5-6}, year = {2009}, month = {MAR}, pages = {415-418}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

A rapid carbon monoxide detection system was developed with the electrochemical functioncalization of polypyrrole (PPy) with ferrocenylmethyltrimethylammonium iodide (FTMA-I) as a co-dopant exhibits very high sensitivity to ppm levels of carbon monoxide gas and fast recovery under normal dry room temperature conditions. The co-dopant was synthesized mainly to incorporate into PPy electrochemically to modify the properties in order to sense carbon monoxide (CO) gas. The FTMA-I doped PPy exhibited the characteristics oxidation/reduction peaks for ferrocene in its cyclic voltammograms. The modified PPy films deposited on interdigited electrodes gave rapid sensitivity within a second to 300 ppm carbon monoxide gas and good sensitivity factor was observed even at 4 mmol of the functional groups in the polymer for 300 ppm carbon monoxide gas. This material detected the CO gas concentration as low as 100 ppm. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {carbon monoxide, Chemical sensor, conducting polymer, polypyrrole}, issn = {0379-6779}, doi = {10.1016/j.synthmet.2008.10.013}, author = {Paul, Santhosh and Chavan, Nayaku and Radhakrishnan, S.} } @article { ISI:000264434000020, title = {Preparation and nonisothermal crystallization behavior of polypropylene/layered double hydroxide nanocomposites}, journal = {Polymer}, volume = {50}, number = {6}, year = {2009}, month = {MAR}, pages = {1505-1515}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Polypropylene (PP)/layered double hydroxide (LDH) nanocomposites were prepared via melt intercalation using dodecyl sulfate anion modified LDH and maleated PP as compatibilizing agent. Evidently the interlayer anions in LDH galleries react with maleic anhydride groups of PP-g-MA and lead to a finer dispersion of individual LDH layers in the PP matrix. The nanostructure was characterized by XRD and TEM; the examinations confirmed the nanocomposite formation with exfoliated/intercalated layered double hydroxides well distributed in the PP matrix. The nonisothermal crystallization behavior of resulting nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. In nonisothermal crystallization kinetics, the Ozawa approach failed to describe the crystallization behavior of nanocomposites, whereas the Avrami analysis and Jeziorny method well define the crystallization behavior of PP/LDH nanocomposite. Combined Avrami and Ozawa analysis (Liu model) also found useful. The results revealed that very small amounts of LDH (1\%) could accelerate the crystallization process relative to the pure PP and increase in the crystallization rates was attributed to the nucleating effect of the nanoparticles. Polarized optical microscopy (POM) observations also support the DSC results. The effective crystallization activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. Overall, results indicated that the LDH particles in nanometer size might act as nucleating agent and distinctly change the type of nucleation, growth and geometry of PP crystals. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Layered double hydroxide, Nonisothermal crystallization kinetics, Polypropylene nanocomposites}, issn = {0032-3861}, doi = {10.1016/j.polymer.2009.01.031}, author = {Lonkar, Sunil P. and Morlat-Therias, Sandrine and Caperaa, N. and Leroux, Fabrice and Gardette, Jean Luc and Singh, R. P.} } @article { ISI:000269883300021, title = {Recyclable amberlyst-70 as a catalyst for biginelli reaction: an efficient one-pot green protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones}, journal = {Catalysis Letters}, volume = {131}, number = {3-4}, year = {2009}, month = {SEP}, pages = {469-473}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones using Amberlyst-70 as a recyclable catalyst has been developed. The use of resinous, nontoxic, thermally stable and inexpensive Amberlyst-70, as a recyclable heterogeneous catalyst, makes the process simple with negligible chemical waste. Thus renders this method an environmentally acceptable synthetic tool for Biginelli reaction.

}, keywords = {Amberlyst-70, Biginelli reaction, green chemistry, heterogeneous catalysis}, issn = {1011-372X}, doi = {10.1007/s10562-009-9896-z}, author = {Chandak, Hemant S. and Lad, Nitin P. and Upare, Pravin P.} } @article { ISI:000264490200029, title = {Short total synthesis of (+)-cryptocarya diacetate}, journal = {Heterocycles}, volume = {77}, number = {2}, year = {2009}, month = {FEB}, pages = {945-952}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A short synthesis of (+)-cryptocarya diacetate was achieved by employing three component linchpin coupling, diastereoselective reduction of beta-hydroxyketone, and Z-selective HWE reaction as key transformations.

}, keywords = {Brook Rearrangement, cryptocarya diacetate, Diastereoselective Reduction, Horner-Wadswarth-Emmons Reaction, Linchpin coupling}, issn = {0385-5414}, doi = {10.3987/COM-08-S(F)107}, author = {Gurjar, Mukund K. and Raghupathi, Neelarapu and Chorghade, Mukund S.} } @article { ISI:000266390000011, title = {Silver fused conducting fiber formation of Au-Ag core-shell nanoparticles mediated by ascorbic acid}, journal = {Plasmonics}, volume = {4}, number = {2}, year = {2009}, month = {JUN}, pages = {161-170}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

In this paper, we report the spontaneous formation of fibrous structures consisting of assemblies of Au-Ag core-shell nanoparticles (NPs) from a solution consisting of Au-Ag core-shell NPs and l-ascorbic acid (AA). AA acted both as the reducing agent for the generation of NPs and also as the mediator for the formation of fibers. The process of fiber formation involved three steps-reduction of HAuCl(4) to Au NPs by AA, subsequent formation of Au-Ag core-shell NPs after addition of AgNO(3), and spontaneous formation of fibers from the mixtures in water. It took typically about 30 days to form complete fibers that are of lengths of several hundred micrometers to millimeters, although nanofibers started forming from the first day of solution preparation. The width of each of these fibers was typically about 1-4 A mu m with length of each segment of fiber bundle, on the order of 40 A mu m. Formation of fibers was also observed in absence of AgNO(3). These fibers consisted of Au NPs and polymer of AA degradation products and were not electrically conducting. Also, low concentrations of AgNO(3) produced fibers with low electrical conductivity. However, it was observed that increase in the amount of AgNO(3) leads to the formation of fibers that were electrically conducting with conductivity values in the range of metallic conductivity. Spectroscopic and electron microscopic investigations were carried out to establish the formation of fibers. The details of fiber formation mechanism under different conditions and electrical conductivities of the fibers are discussed in the article.

}, keywords = {Ascorbic acid, core-shell, Fiber, Gold, Nanoparticles, Silver}, issn = {1557-1955}, doi = {10.1007/s11468-009-9091-5}, author = {Murugadoss, A. and Kar, Manoranjan and Pasricha, Renu and Chattopadhyay, Arun} } @article { ISI:000270338700005, title = {Solid acid catalysts: modification of acid sites and effect on activity and selectivity tuning in various reactions}, journal = {Catalysis Surveys from Asia}, volume = {13}, number = {3}, year = {2009}, month = {SEP}, pages = {205-220}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The effects of acidity and variation in concentration of acid sites of dodecatungstophosphoric acid (DTP), supported DTP and montmorillonite-K catalysts were studied for various organic reactions such as the hydroxyalkylation of phenols to bisphenols, intramolecular rearrangement of benzyl phenyl ether (BPE) to 2-benzyl phenol (2-BP) and selective cleavage of tert-butyldimethylsilyl (TBDMS) ether into the corresponding alcohol. Both dodecatungstophosphoric acid (DTP) impregnated on silica (SiO(2)) and montmorillonite catalysts showed the highest catalyst activity with 90-95\% selectivity to bisphenol for the hydroxyalkylation of phenols to give bisphenol. Temperature Programmed Desorption (TPD) of ammonia and activity results of various catalysts showed that an appropriate combination of both strong and weak acidic sites in the catalyst was highly desirable for high bisphenol selectivity. A 10\% DTP/SiO(2) catalyst was found to be highly selective for the cleavage of TBDMS ether into the corresponding alcohol at room temperature giving a high TON of 9.5 x 10(5) even after the 4th recycle. DTP was also found to be a promising solid acid catalyst for the intramolecular rearrangement of BPE giving 2-BP.

}, keywords = {Acidity tuning, Catalytic cleavage, Hydroxyalkylation, Intramolecular rearrangement, solid acid catalysts}, issn = {1571-1013}, doi = {10.1007/s10563-009-9078-4}, author = {Rode, C. V. and Garade, Ajit C. and Chikate, Rajeev C.} } @article { ISI:000266269600030, title = {Sterically controlled naphthalene homo-oligoamides with novel structural architectures}, journal = {Organic \& Biomolecular Chemistry}, volume = {7}, number = {11}, year = {2009}, month = {MAR}, pages = {2458-2465}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein we report novel naphthalene homo-oligoamides, derived from 4-amino-3-methoxy-naphthalene-2-carboxylic acid and 4-amino-1-methoxy-naphthalene-2-carboxylic acid as monomer building blocks, that display an anti-periplanar arrangement of the naphthyl rings, primarily induced by steric interactions between adjacent groups and functionalities.

}, issn = {1477-0520}, doi = {10.1039/b822076j}, author = {Prabhakaran, Panchami and Puranik, Vedavati G. and Chandran, Jima N. and Rajamohanan, P. R. and Hofmann, Hans-Joerg and Sanjayan, Gangadhar J.} } @article { ISI:000264490200027, title = {Studies toward the total synthesis of carba analogue of motif C OF M. TB cell wall AG complex}, journal = {Heterocycles}, volume = {77}, number = {2}, year = {2009}, month = {FEB}, pages = {909-925}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Herein we describe the synthesis of the carba analogue of motif C of arabinogalactan complex present in M tuberculosis cell wall. Pd(0) catalyzed allylic alkylation and Fraser-Reid{\textquoteright}s glycosidation are the two key reactions that were employed for the synthesis of central glycosyl accepter unit and the glycosylation respectively.

}, keywords = {Allylic Alkylation, desymmetrization, Fraser-Reid{\textquoteright}s Glycosidation, M. Tb Ag Complex, Mycobacterium tuberculosis}, issn = {0385-5414}, doi = {10.3987/COM-08-S(F)59}, author = {Gurjar, Mukund K. and Reddy, Challa Nageswar and Kalkote, Uttam R. and Chorghade, Mukund S.} } @article {43243, title = {Study of cumulant approximations to n-electron valence multireference perturbation theory}, journal = {Journal of Chemical Physics}, volume = {130}, year = {2009}, month = {MAY}, pages = {Article Number: 194107}, abstract = {We investigate the possibility of reducing the complexity of multireference perturbation theory through cumulant based approximations to the high-order density matrices that appear in such theories. Our test cases show that while the cumulant approximated forms are degraded in accuracy relative to the parent theory and exhibit intruder state problems that must be carefully handled, they may provide a route to a simple estimation of dynamic correlation when the parent perturbation theory is infeasible. Nonetheless, further work is clearly needed on better approximations to the denominators in the perturbation theory.}, doi = {10.1063/1.3132922}, author = {Zgid, Dominika and Ghosh, Debashree and Neuscamman, Eric and Chan, Garnet Kin-Lic} } @article { ISI:000270275800002, title = {Study of dielectric behavior in PVDF/clay nanocomposites}, journal = {E-Polymers}, year = {2009}, month = {SEP}, pages = {112}, publisher = {EUROPEAN POLYMER FEDERATION}, address = {1, QUAI LEZAY-MARNESIA, F067000 STRASBOURG, FRANCE}, abstract = {

A high dielectric permittivity nanocomposite based on poly( vinylidene fluoride) (PVDF) and organically modified clay is reported. The present work aims to study the effect of clay on dielectric behavior of PVDF. The dielectric permittivity study shows a remarkable enhancement in the permittivity of nanocomposites in the low frequency region. The obtained permittivity values fits quite well to the prediction of dielectric permittivity from Vo-Shi model, which takes contribution of interface to permittivity into account. This enhanced permittivity in nanocomposites is attributed to the presence of interfacial polarization. The interface effect is further studied with cole-cole plot analysis. The dielectric loss study of pristine PVDF shows two relaxations associated with segmental (glass transition relaxation) and crystalline chain relaxation. However in the PVDF/Clay nanocomposites crystalline relaxation peak disappears which is attributed to the formation of the beta phase in PVDF/clay nanocomposites.

}, issn = {1618-7229}, author = {Chanmal, Chetan and Jog, Jyoti Prakash} } @article { ISI:000269259100007, title = {Supported nano-gold catalysts for epoxidation of styrene and oxidation of benzyl alcohol to benzaldehyde}, journal = {Topics in Catalysis}, volume = {52}, number = {12}, year = {2009}, month = {NOV}, pages = {1677-1687}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Nano-gold particles supported on different alkaline earth oxides (viz. MgO, CaO, BaO and SrO), Gr. IIIa metal oxides (viz. Al(2)O(3), Ga(2)O(3), In(2)O(3) and Tl(2)O(3)), transition metal oxides (viz. TiO(2), Cr(2)O(3), MnO(2), Fe(2)O(3), CoO(x), NiO, CuO, ZnO, Y(2)O(3) and ZrO(2)), rare earth metal oxides (viz. La(2)O(3), Ce(2)O(3), Nd(2)O(3), Sm(2)O(3), Eu(2)O(3), Tb(2)O(3), Er(2)O(3) and Yb(2)O(3)) and U(3)O(8) [all prepared by depositing gold on corresponding metal oxide support by deposition precipitation (DP) and/or homogeneous deposition precipitation (HDP) method] were evaluated for their catalytic performance in the liquid phase epoxidation of styrene by tert-butyl hydroperoxide (TBHP) to styrene oxide and also in the solvent-free benzyl alcohol-to-benzaldehyde oxidation (by molecular oxygen or TBHP) reactions. For the epoxidation, the catalytic performance (styrene oxide yield) of the most promising nano-gold catalysts prepared by the HDP method was in the following order: Au/MgO \> Au/Tl(2)O(3) \> Au/Yb(2)O(3) \> Au/Tb(2)O(3) \> Au/CaO (or TiO(2)). However, for the oxidation of benzyl alcohol to benzaldehyde by molecular oxygen, the order of choice for the most promising catalysts (based on benzaldehyde yield) was Au/U(3)O(8) \> Au/Al(2)O(3) \> Au/ZrO(2) \> Au/MgO. Whereas, when TBHP was used as an oxidizing agent for the benzyl alcohol oxidation, the order of choice for the most promising catalysts was Au/U(3)O(8) \> Au/MgO \> Au/TiO(2) \> Au/ZrO(2) \> Au/Al(2)O(3). The catalytic performance of a particular supported nano-gold catalyst was thus found to depend on the reaction catalysed by them. Moreover, it is strongly influenced by a number of catalyst parameters, such as the metal oxide support, the method of gold depositon on the support, the gold loading and also on the catalyst calcination temperature. Nano-gold particles-support interactions seem to play an important role in controlling the deposition of gold ( amount of gold deposited and size and morphology of gold particles), formation of different surface gold species (Au(0), Au(1+) and Au(3+)) and electronic properties of gold particles and, consequently, control the catalytic performance (both the activity and selectivity) of the supported nano-gold catalysts in the reactions. The nano-gold catalysts prepared by the HDP method showed much better catalytic performance than those prepared by the DP, coprecipitation or impregnation method; in general, the HDP method provided supported gold catalysts with much higher gold loading and/or smaller size gold particles than that achieved by the DP and other methods.

}, keywords = {Benzaldehyde, Benzyl alcohol, epoxidation, Metal oxide supports, Nano-gold catalysts, Oxidation, styrene, Styrene oxide}, issn = {1022-5528}, doi = {10.1007/s11244-009-9306-1}, author = {Choudhary, Vasant R. and Dumbre, Deepa K.} } @article { ISI:000265911700183, title = {Synthesis, characterization and effect of sintering temperature on magnetic properties of MgNi ferrite prepared by co-precipitation method}, journal = {Journal of Alloys and Compounds}, volume = {475}, number = {1-2}, year = {2009}, month = {MAY}, pages = {926-929}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Mixed MgNi ferrites with composition Mg(0.5)Ni(0.5)Fe(2)O(4) where the mole fraction for Ni (x = 0, 0.25, 0.75, 0.5 and 1) were prepared by following co-precipitation method at temperature 110 degrees C and maintaining a pH of solution equal to 9.5 enable to achieve large particle surface area. The resultant materials obtained in powder form were sintered at different temperatures. Thermogravimetry (TGA), X-ray diffraction (XRD) and scanning electron microscopy, technique were applied to obtain structural parameters. The XRD patterns reveal the presence of(311) peak as the most intense one. The intensity of XRD peak increases with increase in sintering temperature. The saturation magnetization values showed increasing trend with increase in sintering temperature from 2.37 to 29.76 emu/g. These results along with the analysis of SEM micrographs are interpreted in terms of increase in particle grain size with increase in sintering temperature. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Ferrites, FT-IR, scanning electron microscopy, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2008.08.082}, author = {Hankare, P. P. and Jadhav, S. D. and Sankpal, U. B. and Chavan, Santosh S. and Waghmare, K. J. and Chougule, B. K.} } @article {42800, title = {Transfer of technology (ToT) document of polyimide binder resins}, year = {2009}, month = {JAN}, author = {Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Dwivedi, Mayank and Chavan. N. N. and Qureshi, Moham and Bhongale, Sunil Sitaram and Rao, Locanindi Hari Sarvothama and Dhansekharan, Janakiraman and Mohan, S. Krishna and Deokar, Sarika Babasaheb and Momin, Mohasin Shamshuddin} } @article { ISI:000262781700012, title = {Ultrasound assisted synthesis of polyacrylic acid-nanoclay nanocomposite and its application in sonosorption studies of malachite green dye}, journal = {Ultrasonics Sonochemistry}, volume = {16}, number = {3}, year = {2009}, month = {MAR}, pages = {351-355}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Synthesis of nanoclay nanocomposite has been undertaken by using polyacryalic acid (PAA) in aqueous medium and ultrasound environment and its application in dye removal has been investigated. The synthesized product was characterized by using FTIR and XRD techniques. The sonosorption capacity of the product namely PAA-nanoclay composite was determined by choosing malachite green (MG) dye as a model pollutant. The effects of various parameters such as nanocomposite loading, pH, various process conditions etc. have been studied. On comparing the results obtained with that of nanoclay as an adsorbent, it was found for an initial concentration of 500 mg/l, the PAA-nanoclay nanocomposite exhibited higher percentage of pollutant removal (68\%) and for nanoclay it was 54\%. The adsorption data has been correlated using Langmuir and Freundlich models. The fit of the Freundlich isotherm model was found to be good in the entire range of concentration for the experimental sorption data obtained on the nanoclay nanocomposite. A plausible reaction mechanism for use of PAA-nanoclay nanocomposite as ail adsorbent is also proposed. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Malachite Green, Nanocomposite, Polyacrylic acid, Sonosorption, Ultrasound}, issn = {1350-4177}, doi = {10.1016/j.ultsonch.2008.10.008}, author = {Sonawane, S. H. and Chaudhari, P. L. and Ghodke, S. A. and Parande, M. G. and Bhandari, Vinay M. and Mishra, Satyendra and Kulkarni, R. D.} } @article { ISI:000268215200019, title = {Vapour sensing with conductive polymer nanocomposites (CPC): polycarbonate-carbon nanotubes transducers with hierarchical structure processed by spray layer by layer}, journal = {Sensors and Actuators B-Chemical}, volume = {140}, number = {2}, year = {2009}, month = {JUL}, pages = {451-460}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The development of conductive polymer nanocomposite (CPC) sensors for volatile organic compounds (VOC) detection has been carried out using a spray layer by layer (LbL) process. This technique was successfully used to hierarchically structure polycarbonate-multiwall carbon nanotubes (PC-CNT) solutions into a double percolated architecture as attested by atomic force microscopy (AFM) and optical microscopy (OM). PC-CNT vapour sensing behaviour was investigated as a function of CNT content, films thickness, vapour flow and vapours solubility parameter. The response ranking A(r)(toluene)\>A(r)(methanol)\>A(r)(water)of PC-CNT was found to be coherent with kappa(12) Flory-Huggins interaction parameters provided that signals are normalised by analyte molecules number. Signals shape was interpreted to the light of Langmuir-Henry-Clustering (LHC) model and found to be proportional to vapour content. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Atomic force microscopy, carbon nanotube, Chemo-electrical behaviour, Conductive polymer nanocomposite, Vapour Sensing, Volatile organic compounds}, issn = {0925-4005}, doi = {10.1016/j.snb.2009.05.006}, author = {Lu, Jianbo and Kumar, Bijandra and Castro, Mickael and Feller, Jean-Francois} } @article { ISI:000262449000038, title = {VLS-like growth and characterizations of dense ZnO nanorods grown by e-beam process}, journal = {Journal of Physics D-Applied Physics}, volume = {42}, number = {3}, year = {2009}, month = {FEB}, pages = {035310}, publisher = {IOP PUBLISHING LTD}, address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We present a new approach to produce ZnO nanorods in a reproducible manner at a temperature lower than other physical vapour deposition techniques, such as the vapour-liquid-solid mechanism. Arrays of well-aligned ZnO nanorods of uniform diameter have been synthesized on the Si substrate precoated with Au, using a simple electron beam evaporation method without the flow of any carrier gas. Scanning electron microscopy and atomic force microscopy characterizations show that as-grown nanorods are well aligned and uniform in diameter. X-ray diffraction measurements and clear lattice fringes in high-resolution transmission electron microscopy image show the growth of good quality polycrystalline hexagonal ZnO nanorods and a \< 0 0 2 \> growth direction. The polarization-dependent studies of near edge x-ray absorption fine structure (NEXAFS) are performed to investigate the electronic structure of the zinc and oxygen ions. The analysis of NEXAFS spectra at different angles of incidence of photon flux indicates the formation of ZnO nanorods having anisotropic behaviour of O and Zn states. The photoluminescence spectrum exhibits strong ultraviolet emission at 385 nm and the UV-visible spectrum also shows a band-gap transition around 390 nm indicating the good quality of nanorods. The catalytic growth mechanism of the ZnO nanorods is discussed on the basis of experimental results in this work.

}, issn = {0022-3727}, doi = {10.1088/0022-3727/42/3/035310}, author = {Agarwal, Dinesh C. and Chauhan, R. S. and Avasthi, D. K. and Sulania, I. and Kabiraj, D. and Thakur, P. and Chae, K. H. and Chawla, Amit and Chandra, Ramesh and Ogale, S. B. and Pellegrini, G. and Mazzoldi, P.} } @article { ISI:000284967000058, title = {Abrupt shear thickening of aqueous solutions of hydrophobically modified poly(N,N {\textquoteleft}-dimethylacrylamide-co-acrylic acid)}, journal = {Macromolecules}, volume = {43}, number = {23}, year = {2010}, month = {DEC}, pages = {10055-10063}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report some new and interesting observations on the abrupt and large shear-induced thickening of aqueous solutions of hydrophobically modified poly(N,N{\textquoteright}-dimethylacrylamide-co-acrylic acid). High molecular weight copolymer was prepared by free radical copolymerization of N,N{\textquoteright}-dimethylacrylamide [DMA] and acrylic acid [AA] and was subsequently modified to different extents using a hydrophobic compound, namely, 3-pentadecylcyclohexylamine [3-PDCA], which is derived from a renewable resource material, cashew nutshell liquid [CNSL]. The structural elucidation of the base copolymer and the hydrophobically modified copolymers was performed by (1)H and (13)C NMR spectroscopy. The zero shear viscosities [eta(0)] of the hydrophobically modified polymers were lower than that of the precursor poly(N,N{\textquoteright}-dimethylacrylamide-co-acrylic acid) until some critical polymer concentration, which increased with increase in hydrophobic modification. Above the critical concentrations, the eta(0) of the hydrophobically modified copolymers surpassed that of the precursor at the same concentration. At moderate shear rates some of these hydrophobically modified copolymers exhibited an abrupt shear-induced thickening in which the viscosity of the samples increased severalfold. We show here from creep experiments that thickening occurs only when the shear rate reaches a critical value, (gamma) over dot(crit), and that the thickened samples can be trapped in different metastable states by controlling the applied stress. Interestingly, the shear thickened samples showed further thickening upon decreasing the applied stress. Eventually, the metastable samples revert to their equilibrium states at characteristic time that depends on (small) probe stress.

}, issn = {0024-9297}, doi = {10.1021/ma1017378}, author = {Lele, Ashish K. and Shedge, Aarti and Badiger, Manohar V. and Wadgaonkar, Prakash and Chassenieux, Christophe} } @article {42793, title = {Amino functionalized oligoimides telechelics}, number = {2922/DEL/2010 A}, year = {2010}, month = {AUG}, type = {India Patents}, abstract = {

This invention relates to a process for the preparation of amino functionalized oligoimide telechelics. More particularly it relates to a process for the preparation of soluble oligoimide prepolymers which can be used as matrix resins that can be rapidly cured to form stable polyimides with amino end functionalities. The amino functionalized oligoimide telechelics are suitable for conversion into three dimensional polymeric systems through condensation chemistry such as reaction with oligo epoxies (epoxy-imide resins), polyacids (polyamide imides) and polyhalogenated compounds (poly amine - imides) to form crosslinked structures having enhanced thermal stability and mechanical strength. The polymers prepared by the process of this invention can be used as materials in advanced composites having high temperature stability.

}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Reddy, Krishna Mohan Srinivasulu and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Rajan, Chelanattukizhakkemadath Raman and Deokar, Sarika Babasaheb and Mulani, Khudbudin Baban and Ghorpade, Ravindra V. and Bhongale, Sunil Sitaram and Nalawade, Archana Chetan and Sontakke, Kalpana Vishwanathrao and Shaikh, Wasif Abdul Lateef and Chavan, Nayaku and Qureshi, Mohammed Shadbar and Dhoble, Deepa Arun and Mule, Smita Atmaram and Bhosle, Sonali Madhavrao and Momin, Mohasin Shamshuddin} } @article {42798, title = {Amino-phenol-formaldehyde resins by in-situ generation of catalyst}, number = {2536/DEL}, year = {2010}, month = {JAN}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Reddy, Krishna Mohan Srinivasulu and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Tayal, Rajivkumar and Qureshi, Moham} } @article { ISI:000285864600001, title = {Applications of zeolites in industrial and other purposes}, journal = {Research Journal of Chemistry and Environment}, volume = {14}, number = {4}, year = {2010}, month = {DEC}, pages = {3}, publisher = {DR JYOTI GARG}, address = {SECTOR A/80 SCHEME NO 54, VIJAY NAGAR, A B ROAD, INDORE MP, 452 010, INDIA}, issn = {0972-0626}, author = {Chumbhale, Vilas R.} } @article {42799, title = {Beaded cross linked polymers containing tert-amino functional group moities}, number = {2537/DEL}, year = {2010}, month = {DEC}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Reddy, Krishna Mohan Srinivasulu and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Tayal, Rajivkumar and Qureshi, Moham} } @article { ISI:000275708600041, title = {Carbon dissolution and segregation in Pd(110)}, journal = {Journal of Physical Chemistry C}, volume = {114}, number = {11}, year = {2010}, month = {MAR}, pages = {5060-5067}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The bulk-surface diffusion of carbon in Pd(110) has been investigated using Molecular beams to examine the clean-off of carbon with gas-phase oxygen. The dominant product of the reaction above 600 K is CO CO, is only produced at much lower temperatures where the lifetime of adsorbed CO is significant. The segregation from the bulk Only Occurs at a measurable rate at \>750 K, while loss of carbon into the bulk call occur at much lower temperatures. The reaction of carbon at high temperatures shows two regimes: (i) a non steady-state evolution of CO due to the clean-off of surface carbon already present on the surface, followed by (ii) a near steady-state reaction due to the continuous diffusion of carbon to the surface.

}, issn = {1932-7447}, doi = {10.1021/jp9108046}, author = {Bowker, Michael and Counsell, Jonathan and El-Abiary, Kareem and Gilbert, Lee and Morgan, Chris and Nagarajan, Sankaranarayanan and Gopinath, Chinnakonda S.} } @article { ISI:000281161700013, title = {Catalytic asymmetric transfer hydrogenation of ketones using [Ru(p-cymene)Cl-2](2) with chiral amino alcohol ligands}, journal = {Catalysis Letters}, volume = {138}, number = {3-4}, year = {2010}, month = {SEP}, pages = {231-238}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Catalytic asymmetric transfer hydrogenation of aromatic alkyl ketones has been investigated using [Ru(p-cymene)Cl-2](2) and new derivatives of beta-amino alcohols synthesized from (S)-(-)-lactic acid and mandelic acid as ligands. Chiral secondary alcohols were obtained with good to excellent conversion (60-90\%) and moderate to good enantioselectivities (40-86\%). Asymmetric transfer hydrogenation of ketones has been investigated using [Ru(p-cymene)Cl-2](2) and beta-amino alcohols synthesized from (S)-(-)-lactic acid and Mandelic acid as ligands. Chiral secondary alcohols were obtained with good to excellent conversion (60-90\%) and moderate to good enantioselectivities (40-86\%).

}, keywords = {Amino alcohol ligand, Asymmetric transfer hydrogenation, Ketones, Ru catalyst}, issn = {1011-372X}, doi = {10.1007/s10562-010-0408-y}, author = {Deshpande, Sudhindra H. and Kelkar, Ashutosh A. and Gonnade, Rajesh G. and Shingote, Savita K. and Chaudhari, Raghunath V.} } @conference { ISI:000279938400012, title = {Chemical shielding of closed-shell molecules using extended coupled-cluster theory}, booktitle = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives}, series = {Astrophysics and Space Science Proceedings}, year = {2010}, note = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives, Indian Inst Astrophys, Kodaikanal Observatory, Bangalore, INDIA, JAN 28-31, 2009}, month = {MAR}, pages = {111-121}, publisher = {Springer}, organization = {Springer}, address = {233 Spring Street, New York, NY 10013, United States}, abstract = {

In this paper we report calculation of the nuclear magnetic shielding constant using extended coupled cluster response approach. We present the results for the HF, BH, CO and N(2) molecules. These results show importance of correlation corrections for the shielding constant.

}, isbn = {978-3-642-10321-6}, issn = {1570-6591}, doi = {10.1007/978-3-642-10322-3_12}, author = {Ravichandran, Lalitha and Joshi, Sayali and Vaval, Nayana}, editor = {Chaudhuri, R. K. and Mekkaden, M. V. and Raveendran, A. V. and Narayanan, A. S.} } @article { ISI:000279322700048, title = {Co(III)(salen)-catalyzed HKR of two stereocentered alkoxy- and azido epoxides: a concise enantioselective synthesis of (S,S)-reboxetine and (+)-epi-cytoxazone}, journal = {Chemical Communications}, volume = {46}, number = {27}, year = {2010}, month = {JUN}, pages = {5012-5014}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The HKR of racemic syn- or anti- alkoxy- and azido epoxides catalyzed by Co(salen) complex affords a practical access to a series of enantioenriched syn- or anti- alkoxy- and azido epoxides and the corresponding 1,2-diols. This strategy has been successfully employed in the concise, enantioselective synthesis of bioactive molecules such as (S, S)-reboxetine and (+)-epi-cytoxazone.

}, issn = {1359-7345}, doi = {10.1039/c0cc00650e}, author = {Reddy, R. Santhosh and Chouthaiwale, Pandurang V. and Suryavanshi, Gurunath and Chavan, Vilas B. and Sudalai, Arumugam} } @article { ISI:000274355800017, title = {Comparison of the auxiliary density perturbation theory and the noniterative approximation to the coupled perturbed kohn-sham method: case study of the polarizabilities of disubstituted azoarene molecules}, journal = {Journal of Physical Chemistry A}, volume = {114}, number = {6}, year = {2010}, month = {FEB}, pages = {2357-2364}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We present a theoretical study of the polarizabilities of free and disubstituted azoarenes employing auxiliary density perturbation theory (ADPT) and the noniterative approximation to the coupled perturbed Kohn-Sham (NIA-CPKS) method. Both methods are noniterative but use different approaches to obtain the perturbed density matrix. NIA-CPKS is different froth the conventional CPKS approach in that the perturbed Kohn-Sham matrix is obtained numerically, thereby yielding a single-step solution to CPKS. ADPT is an alternative approach to the analytical CPKS method in the framework of the auxiliary density functional theory. It is shown that the polarizabilities obtained using these two methods are in good agreement with each other. Comparisons are made for disubstituted azoarenes, which give support to the push-pull mechanism. Both methods reproduce the same trend for polarizabilities because of the substitution pattern of the azoarene moiety. Our results are consistent with the standard organic chemistry {\textquoteleft}{\textquoteleft}activating/deactivating{\textquoteright}{\textquoteright} sequence. We present the polarizabilities of the above molecules calculated with three different exchange-correlation functionals and two different auxiliary function sets. The computational advantages of both methods are also discussed.

}, issn = {1089-5639}, doi = {10.1021/jp909966f}, author = {Shedge, Sapana V. and Carmona-Espindola, Javier and Pal, Sourav and Koster, Andreas M.} } @article { ISI:000280605900013, title = {Coupling growth-factor engineering with nanotechnology for therapeutic angiogenesis}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {107}, number = {31}, year = {2010}, month = {AUG}, pages = {13608-13613}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Therapeutic angiogenesis is an emerging paradigm for the management of ischemic pathologies. Proangiogenic Therapy is limited, however, by the current inability to deliver angiogenic factors in a sustained manner at the site of pathology. In this study, we investigated a unique nonglycosylated active fragment of hepatocyte growth factor/scatter factor, 1K1, which acts as a potent angiogenic agent in vitro and in a zebrafish embryo and a murine matrigel implant model. Furthermore, we demonstrate that nanoformulating 1K1 for sustained release temporally alters downstream signaling through the mitogen activated protein kinase pathway, and amplifies the angiogenic outcome. Merging protein engineering and nanotechnology offers exciting possibilities for the treatment of ischemic disease, and furthermore allows the selective targeting of downstream signaling pathways, which translates into discrete phenotypes.

}, keywords = {cardiovascular disease, HGF/SF, ischemic disease, nanoparticle, protein engineering}, issn = {0027-8424}, doi = {10.1073/pnas.1006007107}, author = {Roy, Rituparna Sinha and Soni, Shivani and Harfouche, Rania and Vasudevan, Pooja R. and Holmes, Oliver and de Jonge, Hugo and Rowe, Arthur and Paraskar, Abhimanyu and Hentschel, Dirk M. and Chirgadze, Dimitri and Blundell, Tom L. and Gherardi, Ermanno and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article { ISI:000278985800034, title = {Enantioselective synthesis of (R)-(+)-alpha-lipoic acid via proline-catalyzed sequential alpha-aminoxylation and HWE olefination of aldehyde}, journal = {Tetrahedron Letters}, volume = {51}, number = {27}, year = {2010}, month = {JUL}, pages = {3587-3589}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient enantioselective synthesis of (R)-(+)-alpha-lipoic acid is described, in high optical purity (\>97\% ee), using L-proline-catalyzed sequential alpha-aminoxylation and Horner-Wadsworth-Emmons olefination of aldehyde as the key step. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.05.007}, author = {Panchgalle, Sharad P. and Jogdand, Ganesh F. and Chavan, Subhash P. and Kalkote, Uttam R.} } @article { ISI:000274459600009, title = {Evidence for the co-existence of distorted tetrahedral and trigonal bipyramidal aluminium sites in SrAl12O19 from Al-27 NMR studies}, journal = {Solid State Communications}, volume = {150}, number = {5-6}, year = {2010}, month = {JAN}, pages = {262-266}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Strontium aluminate, SrAl12O19, is a ceramic material having the hexagonal magnetoplumbite-type structure, with multiple Al coordination environments. An earlier low-field Al-27 solid-state NMR study reported five different Al sites in this system: one AlO4, one AlO5, and three AlO6 sites; whereas a later high-field study showed that the AlO5 site is a distorted AlO4 site with a very large quadrupolar coupling constant (similar to 20 MHz). Our magic angle spinning (MAS) and 3-quantum magic angle spinning (3QMAS) NMR studies at 7.05 T unambiguously show evidence for an AlO5 site. However, evidence for the presence of a distorted AlO4 site is obtained from studies at high fields (16.4 and 17.6 T), in addition to the AlO5 site. Thus the present solid-state NMR studies give evidence for the simultaneous presence of both the five-coordinated and distorted four-coordinated sites in this system. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Local structure, MQMAS, Nuclear magnetic resonance, Strontium aluminate}, issn = {0038-1098}, doi = {10.1016/j.ssc.2009.11.008}, author = {Harindranath, K. and Viswanath, K. Anusree and Chandran, C. Vinod and Braeuniger, Thomas and Madhu, Perunthiruthy K. and Ajithkumar, Thalasseril G. and Joy, Pattayil Alias} } @article { ISI:000280463000017, title = {Exfoliation of clay layers in polypropylene matrix using potassium succinate-g-polypropylene as compatibilizer}, journal = {Composites Science and Technology}, volume = {70}, number = {10}, year = {2010}, month = {SEP}, pages = {1550-1556}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

The efficiency of potassium succinate-g-polypropylene (KPPSA) as compatibilizer for the dispersion of clay in a high molecular weight polypropylene during melt mixing for the preparation of nanocomposites was evaluated and compared with maleic anhydride-g-polypropylene (PPMA). Nanocomposites were prepared by direct melt mixing and by masterbatch methods and the structure obtained was characterized by WAXD and TEM. The exfoliation and better dispersion of the organoclay was observed with KPPSA than PPMA. The dispersion of clay was found to be dependent on the method of preparation, type and the amount of compatibilizer used. The dispersion was better when the nanocomposites were prepared by two step masterbatch route than the single step direct mixing method. Flexural moduli and crystallization behavior were studied and correlated with the dispersion of organoclay in the PP matrix. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {differential scanning calorimetry, Mechanical property, Nano composites, Nanoclays, polypropylene}, issn = {0266-3538}, doi = {10.1016/j.compscitech.2010.05.021}, author = {Rama, Mallikarjuna Shroff and Neppalli, Ramesh and Chellaswamy, Ramesh and Swaminathan, Sivaram} } @article { ISI:000285370100022, title = {Facile enantioselective synthesis of (S)-N-(5-chlorothiophene-2-sulfonyl)-beta,beta-diethylalaninol via proline-catalyzed asymmetric alpha-aminooxylation and alpha-amination of aldehyde}, journal = {Tetrahedron Letters}, volume = {51}, number = {50}, year = {2010}, month = {DEC}, pages = {6565-6567}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A high-yielding enantioselective synthesis of the bioactive (S)-N-(5-chlorothiophene-2-sulfonyl)beta,beta-diethylalaninol (1), a Notch-1-sparing gamma-secretase inhibitor metabolite (with EC50 = 28 nM) effective in reduction of All production in vivo, has been realized starting from readily available 3-pentanone. The key steps of the synthesis are proline-catalyzed alpha-aminooxylation and alpha-amination of aldehyde: the latter contributing an overall yield of 45.2\% and 98\% ee. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {alpha-Amination, alpha-Aminooxylation, Alzheimer{\textquoteright}s disease, Amino alcohol, Proline}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.10.029}, author = {Rawat, Varun and Chouthaiwale, Pandurang V. and Chavan, Vilas B. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000277129300005, title = {Facile synthesis of N-substituted maleimides}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {49}, number = {4}, year = {2010}, month = {APR}, pages = {487-488}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

A simple and efficient method for the synthesis of N-substituted malemides from the corresponding maleamie acids under the phase transfer catalysis has been described

}, keywords = {Maleamic acids, maleimides, phase transfer catalysis, synthesis}, issn = {0376-4699}, author = {Deshpande, Sunita R. and Maybhate, Shailaja P. and Likhite, Anjali P. and Chaudhary, Preeti M.} } @article { ISI:000277834300107, title = {Field dependence of the magnetocaloric effect in core-shell nanoparticles}, journal = {Journal of Applied Physics}, volume = {107}, number = {9}, year = {2010}, note = {11th Joint MMM-Intermag Conference, Washington, DC, JAN 18-22, 2010}, month = {MAY}, pages = {09A902}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The field dependence of the magnetic entropy change peak at the low temperature surface spin freezing transition in chemically synthesized, monodispersed Co, Co-Ag, and Ni-Ag core-shell nanoparticles is studied, with the aim of gaining insight into the critical exponents of this transition. It is evidenced that although the magnitude of the peak entropy change and position of the peak can be tuned by changing the composition and nature (metallic or organic) of the shell and surfactant layers, the characteristics of the spin freezing transition are not altered. The field dependence of the refrigerant capacity also confirms this finding. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3335514]

}, issn = {0021-8979}, doi = {10.1063/1.3335514}, author = {Franco, V. and Conde, A. and Sidhaye, Deepti and Bhagavatula L. V. Prasad and Poddar, P. and Srinath, S. and Phan, M. H. and Srikanth, H.} } @article { ISI:000272936000061, title = {Fluconazole analogues containing 2H-1,4-benzothiazin-3(4H)-one or 2H-1,4-benzoxazin-3(4H)-one moieties, a novel class of anti-Candida agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {20}, number = {2}, year = {2010}, month = {JAN}, pages = {722-725}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

As a part of our program to develop new antifungal agents, a series of fluconazole analogues was designed and synthesized wherein one of the triazole moieties in fluconazole was replaced with 2H-1,4-benzothiazin-3(4H)-one or 2H-1,4-benzoxazin-3(4H)-one moiety. The new chemical entities thus synthesized were screened against various fungi and it was observed that the compounds 4a and 4i are potent inhibitors of Candida strains. The structure-activity relationship for these compounds is discussed. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {antifungal, Benzothiazinone, Benzoxazinone, Fluconazole}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2009.11.071}, author = {Borate, Hanumant B. and Maujan, Suleman R. and Sawargave, Sangmeshwer P. and Chandavarkar, Mohan A. and Vaiude, Sharangi R. and Joshi, Vinay A. and Wakharkar, Radhika D. and Iyer, Ramki and Kelkar, Ramesh G. and Chavan, Subhash P. and Kunte, Sunita S.} } @article { ISI:000278451000017, title = {Formal synthesis of (+/-)-camptothecin via tricyclic lactone as key synthon}, journal = {Tetrahedron Letters}, volume = {51}, number = {23}, year = {2010}, month = {JUN}, pages = {3099-3101}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Formal synthesis of (+/-)-camptothecin via CDE tricyclic lactone employing tandem Michael addition, Dieckmann condensation and addition-elimination reaction as key steps starting from glycinate is described. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.04.019}, author = {Chavan, Subhash P. and Dhawane, Abasaheb N. and Kalkote, Uttam R.} } @article { ISI:000274954400005, title = {Gas-phase oxidant-free oxidation of cyclohexanol over V2O5-MoO3-M2O (M = Na, K, Cs) catalysts}, journal = {Indian Journal of Chemical Technology}, volume = {17}, number = {1}, year = {2010}, month = {JAN}, pages = {43-49}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

Oxidant-free oxidation (dehydrogenation) of cyclohexanol is carried out in a down-flow integral laboratory scale reactor using different alkali doped catalysts. The effect of reaction temperature, contact time (W/F) and doping of alkali metals is studied to check its effect on nature of prominent products of the reaction (cyclohexanone and cyclohexene). At lower temperature the cyclohexanone prevails whereas at higher temperature cyclohexene is observed in prominence. Acid-modified catalysts (with boron and phosphorous) facilitated cyclohexene selectivity whereas alkali modified catalysts facilitated cyclohexanone selectivity. Calcination of sodium modified catalyst at different temperatures under static condition affect characteristic phase intensity and cyclohexanone selectivity. XRD investigation showed formation of different inorganic phases as the characteristic of dopant. Cesium modified catalyst showed better dehydrogenation activity.

}, keywords = {Cyclohexanol, dehydration, Dehydrogenation, Electronegativity, V2O5-MoO3}, issn = {0971-457X}, author = {Vyawahare, Y. K. and Chumbhale, Vilas R. and Pardhy, S. A. and Samuel, V. and Aswar, A. S.} } @article { ISI:000279843200010, title = {Harnessing structure-activity relationship to engineer a cisplatin nanoparticle for enhanced antitumor efficacy}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {107}, number = {28}, year = {2010}, month = {JUL}, pages = {12435-12440}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Cisplatin is a first line chemotherapy for most types of cancer. However, its use is dose-limited due to severe nephrotoxicity. Here we report the rational engineering of a novel nanoplatinate inspired by the mechanisms underlying cisplatin bioactivation. We engineered a novel polymer, glucosamine-functionalized polyisobutylene-maleic acid, where platinum (Pt) can be complexed to the monomeric units using a monocarboxylato and an O {\textendash}\> Pt coordinate bond. We show that at a unique platinum to polymer ratio, this complex self-assembles into a nanoparticle, which releases cisplatin in a pH-dependent manner. The nanoparticles are rapidly internalized into the endolysosomal compartment of cancer cells, and exhibit an IC50 (4.25 + 0.16 mu M) comparable to that of free cisplatin (3.87 +/- 0.37 mu M), and superior to carboplatin (14.75 +/- 0.38 mu M). The nanoparticles exhibited significantly improved antitumor efficacy in terms of tumor growth delay in breast and lung cancers and tumor regression in a K-ras(LSL/+)/Pten(fl/fl) ovarian cancer model. Furthermore, the nanoparticle treatment resulted in reduced systemic and nephrotoxicity, validated by decreased biodistribution of platinum to the kidney as quantified using inductively coupled plasma spectroscopy. Given the universal need for a better platinate, we anticipate this coupling of nanotechnology and structure-activity relationship to rationally reengineer cisplatin could have a major impact globally in the clinical treatment of cancer.

}, keywords = {cancer, chemotherapy, nanomedicine}, issn = {0027-8424}, doi = {10.1073/pnas.1007026107}, author = {Paraskar, Abhimanyu S. and Soni, Shivani and Chin, Kenneth T. and Chaudhuri, Padmaparna and Muto, Katherine W. and Berkowitz, Julia and Handlogten, Michael W. and Alves, Nathan J. and Bilgicer, Basar and Dinulescu, Daniela M. and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article { ISI:000273933800010, title = {Heterogenized copper catalysts for the amination of arylhalide: synthesis, characterization and catalytic applications}, journal = {Applied Catalysis A-General}, volume = {372}, number = {1}, year = {2010}, month = {JAN}, pages = {73-81}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This research investigated the synthesis, characterization and catalytic activity of heterogenized copper complexes for the selective amination of aryl halides. Amination reactions using homogeneous copper catalyst systems are not generally selective and it is also difficult to recover the catalyst from the homogeneous system for recycling. To overcome these difficulties, our efforts were directed towards the development of cheaper heterogeneous catalyst systems, which can be easily recovered and recycled. Heterogenized analogs of the homogenous Cu complexes were prepared using two methods: (a) encapsulation of copper complexes in zeolite-Y and (b) tethering of copper complexes on various supports like zeolite-Y, silica, charcoal, or clay. The encapsulated and tethered copper catalysts on zeolite-Y were characterized using EPR, Diffused reflectance UV-vis, XRD, IAS, ICPES, SEM, and TEM. The results confirmed that the copper complexes were truly heterogenized in zeolite-Y support. Encapsulated and tethered copper complexes were tested for amination of aryl iodide. The effects of various reaction parameters were examined using tethered Cu(Phen)(PPh(3))Br-PTA-Y catalyst to determine optimum conditions. A recycle study of encapsulated and tethered Cu catalyst was carried out to test their robustness for possible commercial exploitation. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Amination, C-N coupling, Copper, heterogeneous catalysis, mesoporous materials}, issn = {0926-860X}, doi = {10.1016/j.apcata.2009.10.013}, author = {Patil, Nandkumar M. and Gupte, Sunil P. and Chaudhari, Raghunath V.} } @article { ISI:000281153600066, title = {High current density, low threshold field emission from functionalized carbon nanotube bucky paper}, journal = {Applied Physics Letters}, volume = {97}, number = {7}, year = {2010}, month = {AUG}, pages = {073102}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Field emission studies of bucky paper of multiwalled carbon nanotubes (MWNTs), prepared after microwave (MW) assisted acid functionalization are reported along with a comparison with that of {\textquoteleft}{\textquoteleft}as-grown{\textquoteright}{\textquoteright} sample. MW treated bucky papers reveal an interesting linear field emission behavior in Fowler-Nordheim plot. The field emission currents at preset value are found to be remarkably stable over a period of more than 3 h sustaining current densities of 4.9 mA/cm(2) and 8.5 mA/cm(2) for {\textquoteleft}{\textquoteleft}as-grown{\textquoteright}{\textquoteright} and functionalized sample, respectively. The enhancement in the field emission due to functionalization has been discussed in terms of tip opening and defect induced charge transport caused by intershell and intertubular interaction. (C) 2010 American Institute of Physics. [doi:10.1063/1.3479049]

}, keywords = {Carbon nanotubes, current density, field emission, fullerenes}, issn = {0003-6951}, doi = {10.1063/1.3479049}, author = {Kakade, Bhalchandra A. and Pillai, Vijayamohanan K. and Late, Dattatray J. and Chavan, Padmakar G. and Sheini, Farid J. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000280570900070, title = {Identification of two flavin monooxygenases from an effluent treatment plant sludge metagenomic library}, journal = {Bioresource Technology}, volume = {101}, number = {21}, year = {2010}, month = {NOV}, pages = {8481-8484}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Oxygenases are useful for the production of many industrially important molecules. Screening of an effluent treatment plant (ETP) sludge metagenomic library identified two clones encoding proteins, B1 and B2, with similarity to putative Flavin monooxygenases from Mesorhizobium loti and Sphingomonas wittichi, respectively. The deduced amino acid sequences show only 20\% identity, but both have a paired Rossman fold and a flavin monooxygenase (FMO) motif. B1 and B2 appear to be members of the Flavin-containing monooxygenase and the Baeyer-Villiger monooxygenases subfamilies, respectively. When expressed in Escherichia coli, the two clones produced activities that oxidized indole to a mixture of indigo and indirubin pigments. These results suggest that B1 and B2 have potential as a biocatalyst in indigo/indirubin production. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Indigo, Indirubin, Metagenome, Metagenomic, Monooxygenase}, issn = {0960-8524}, doi = {10.1016/j.biortech.2010.06.025}, author = {Singh, Ajit and Chauhan, Nar Singh and Thulasiram, H. V. and Taneja, Vibha and Sharma, Rakesh} } @article { ISI:000273895500012, title = {Immobilized palladium nanoparticles catalyzed oxidative carbonylation of amines}, journal = {Industrial \& Engineering Chemistry Research}, volume = {49}, number = {3}, year = {2010}, note = {Joint 7th International Symposium on Catalysis in Multiphase Reactors (CAMURE-7)/6th International Symposium on Multifunctional Reactors (ISMR-6), Montreal, CANADA, AUG 23-26, 2009}, month = {FEB}, pages = {1027-1032}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Catalytic application of immobilized palladium nanoparticles for synthesis or ureas by oxidative carbonylation of amines has been investigated. This is the first report oil oxidative carbonylation of amines to ureas using immobilized palladium nanoparticles catalyst. The palladium nanoparticles were immobilized on a NaY zeolite support through 3-aminopropyl-trimethoxysilane (APTS) as anchoring agent. The [Pd]-APTS-Y catalyst along with NaI promoter showed high conversion and selectivity to the desired urea products over several amine compounds including ail example of an aliphatic amine precursor even at 333 K. The immobilized catalyst was easily separated and recycled several times without any loss of activity. The role of different solvents, iodide promoters, iodide to Pd ratio, concentration of substrates, and temperature on the overall yield of the reaction was also investigated.

}, issn = {0888-5885}, doi = {10.1021/ie9007024}, author = {Didgikar, Mahesh R. and Roy, Debdut and Gupte, Sunil P. and Joshi, Sunil S. and Chaudhari, Raghunath V.} } @article { ISI:000274929000006, title = {In situ encapsulation of pt nanoarchitectures of varying morphologies in mesoporous compounds}, journal = {Chemistry of Materials}, volume = {22}, number = {5}, year = {2010}, month = {MAR}, pages = {1633-1639}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nanoparticle morphology could be engineered and fine-tuned based on a novel in situ template method Different shapes of platinum nanoparticles were obtained from very low concentrations of precursors and could be isolated exclusively inside the mesochannels of SBA-15 This was achieved by dispersing a platinum precursor in surfactant modified polymer to different extents and using these composite materials as templates for the formation of mesoporous silica [PtCl(6)](2-) interacts with the cationic headgroup of the surfactant and facilitates the isolation of precursors within the composite template leading to the formation of nanoparticles molded by the walls of the mesochannels when calcined When this [PtCl(6)](2-)-surfactant-polymer micelle composite is aged for different duration, Pt nanoparticles of various morphologies like spheroids, nano rugby balls, and nanorods are obtained

}, issn = {0897-4756}, doi = {10.1021/cm9036499}, author = {Prashar, Atul K. and Hodgkins, Robert P. and Chandran, Jima N. and Rajamohanan, P. R. and Devi, R. Nandini} } @article { ISI:000275612000009, title = {Influence of zeolitic structure on photoreduction property and hydrogen evolution reaction}, journal = {International Journal of Hydrogen Energy}, volume = {35}, number = {5}, year = {2010}, month = {MAR}, pages = {1911-1920}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A new photocatalytic material developed by supporting TiO(2) in combination with transition metal ion like cobalt and heteropolyacid (HPA) on the surface is facilitating enhanced photoreduction of water and methyl orange Zeolites being a solid acid play an important role in the electron transfer reaction, facilitated by the Lewis acid sites in the form of aluminium ions In the present work, four different zeolite matrices namely, NaY zeolite, ultrastable zeolite Y, beta zeolite and titanium silicate-1 have been used for the synthesis of new photocatalytic materials These materials have been evaluated for water splitting by an initial screening procedure using methyl orange photoreduction The photocatalyst containing Na Y has emerged as a potential photocatalyst with hydrogen evolution rate of 2730 mu mol/h/g of TiO(2) Hydrogen evolution was not observed for the composite photocatalysts synthesized using the other zeolite matrices It has been observed that physicochemical properties like Si/Al ratio, acidity and basicity of the zeolite support have a tremendous influence on the photoreduction property of these zeolite matrices (C) 2010 Professor T Nejat Veziroglu Published by Elsevier Ltd All rights reserved

}, keywords = {H(2) evolution, Lewis acidity, Si/Al ratio, water splitting, Zeolite structure}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2009.12.172}, author = {Chatti, Ravikrishna V. and Dubey, Nidhi and Joshi, Meenal V. and Labhsetwar, Nitin K. and Joshi, P. N. and Rayalu, Sadhana S.} } @article { ISI:000279787200004, title = {Isolation, structure, and functional elucidation of a modified pentapeptide, cysteine protease inhibitor (CPI-2081) from streptomyces species 2081 that exhibit inhibitory effect on cancer cell migration}, journal = {Journal of Medicinal Chemistry}, volume = {53}, number = {14}, year = {2010}, month = {JUL}, pages = {5121-5128}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Cysteine proteases play an important role in cell migration and tumor metastasis. Therefore, their inhibitors are of colossal interest, having potential to be developed as effective antimetastatic drugs for tumor chemotherapy. Traditionally, secondary metabolites from streptomyces show a wide range of diversity with respect to their biological activity and chemical nature. In this article, we have described the characterization of small molecule cysteine protease inhibitor, CPI-2081 (compound 1), a mixture of two novel pentapeptides, compound 1a (736.71 Da), and compound 1b (842.78 Da), isolated from Streptomyces species NCIM2081, following solvent extraction and repeated HPLC based on C18 chemistry, and completely characterized using a variety of both ID and 2D NMR spectroscopy. Further, it was found that nanomolar concentration of compound 1 is able to inhibit papain hydrolytic activity. Also, compound 1 significantly inhibits tumor cell migration at sub cytotoxic concentration, indicating its remarkable potential to be developed as antimetastatic drug, which will make chemotherapy more localized and specific, thereby minimizing the hazardous side effects on normal tissues.

}, issn = {0022-2623}, doi = {10.1021/jm9014179}, author = {Singh, Jay Prakash and Tamang, Sudarsan and Rajamohanan, P. R. and Jima, N. C. and Chakraborty, Goutam and Kundu, Gopal C. and Gaikwad, Sushama M. and Khan, Mohammad Islam} } @article { ISI:000276206700037, title = {Kinetics of reductive alkylations of phenylenediamines: influence of substrates isomeric structure}, journal = {Chemical Engineering Science}, volume = {65}, number = {1, SI}, year = {2010}, note = {20th International Symposium on Chemical Reaction Engineering, Kyoto, JAPAN, SEP, 2008}, month = {JAN}, pages = {232-239}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Reductive alkylation of ortho-, meta- and para-phenylenediamines (PDAs) with methyl ethyl ketone (MEK) has been studied in a semi-batch slurry reactor in the presence of a commercial 3\% Pt/Al(2)O(3) catalyst. It was observed that the PDA isomers differ remarkably from each other in their activity in reductive alkylation and product distribution. The activity was found to decrease in the following order: PPDA \> OPDA \> MPDA. To understand the substrate structure-activity correlation, the homogeneous equilibrium reactions involved in the alkylation step and the overall catalytic reactions were studied separately. Kinetics of reductive alkylation of PDAs with MEK as a solvent and alkylating agent with 3\% Pt/Al(2)O(3) catalyst was studied in a semi-batch slurry reactor over a temperature range of 373-453K and pressure range of 2.07-6.21 MPa. Semi-batch slurry reactor models were developed and kinetic parameters were estimated by fitting the integral batch reactor data at different temperatures to understand the influence of different reaction steps on the activity and selectivity of different products. Published by Elsevier Ltd.

}, keywords = {Batch, catalysis, kinetics, Multiphase reactions, Phenylenediamines, Reaction engineering, Reductive alkylation}, issn = {0009-2509}, doi = {10.1016/j.ces.2009.06.065}, author = {Roy, Debdut and Chaudhari, Amit S. and Chaudhari, Raghunath V.} } @article { ISI:000288434800016, title = {Kinetics studies and mechanism evolution of the epoxidation of styrene over nanoporous Au doped TS-1}, journal = {Polish Journal of Chemical Technology}, volume = {12}, number = {4}, year = {2010}, month = {JAN}, pages = {72-78}, publisher = {VERSITA}, address = {SOLIPSKA 14A-1, 02-482 WARSAW, POLAND}, abstract = {

{A kinetic investigation of the slurry phase epoxidation of styrene with hydrogen peroxide has been carried out, for the first time, over nanoporous Au doped TS-1 catalyst, in a batch reactor, in the temperature range of 313-333 K. It was found that product selectivity and the rate of reaction are greatly influenced by concentrations of styrene and hydrogen peroxide. Kinetics studies reveal that the mechanism of the reaction is of the {\textquoteleft}{\textquoteleft}Redox{\textquoteright}{\textquoteright} type. The rate equation

}, keywords = {Au/TS-1, epoxidation, kinetics, styrene, Styrene oxide}, issn = {1509-8117}, doi = {10.2478/v10026-010-0054-6}, author = {Saxena, Samidha and Dwivedi, Reena and Bhadauria, Sheenu and Chumbhale, Vilas R. and Prasad, Rajendra} } @article { ISI:000284664500025, title = {NaIO4/LiBr-mediated aziridination of olefins using chloramine-T}, journal = {Tetrahedron Letters}, volume = {51}, number = {49}, year = {2010}, month = {DEC}, pages = {6460-6462}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A new milder protocol for aziridination of a variety of olefins has been described. The process employs catalytic amount of sodium metaperiodate (NaIO4) as an oxidant and LiBr and chloramine-T as the bromine and nitrogen sources, respectively. Interestingly, the formation of aziridine products in all the cases studied takes place presumably through a process of 1,2-aminobromination of alkenes. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Aziridination, Chloramine-T, Lithium bromide, Olefin, Sodium metaperiodate}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.10.005}, author = {Karabal, Pratibha U. and Chouthaiwale, Pandurang V. and Shaikh, Tanveer M. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000275434800071, title = {Novel poly(amide-hydrazide)s and copoly(amide-hydrazide)s from Bis-(4-aminobenzyl) hydrazide and aromatic diacid chlorides: synthesis and characterization}, journal = {Journal of Applied Polymer Science}, volume = {116}, number = {4}, year = {2010}, month = {MAY}, pages = {2441-2450}, publisher = {JOHN WILEY \& SONS INC}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

A new aromatic diamine, viz., bis-(4-aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from alpha-tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide-hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide-hydrazide)s, based on different mol \% of BABH and bis-(4-aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amidehydrazide)s and copoly(amide-hydrazide)s were characterized by inherent viscosity [eta(inh)], FTIR, solubility, X-ray diffraction (MUD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothy and afforded the polymers with inherent viscosities in the range of 0.18-093 dL/g in (NMP + 4\% LiCl) at 30 degrees C +/- 0.1 degrees C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide-hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide-hydrazide)s derived from a mixture of BABH and bis-(4-aminophenyl) ether (ODA). Polymers showed initial weight loss around 160 degrees C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide-oxadiazole)s. Copolyamide-hydrazides showed, T(max) between 400 and 540 degrees C which is essentially the decomposition of poly(amide-oxadiazole)s. (C) 2010 Wiley Periodicals, Inc. J App Polym Sci 116: 2441-2450, 2010

}, keywords = {bis-(4-aminobenzyl) hydrazide, poly(amide-hydrazide), structure-property relations, Thermogravimetric analysis (TGA), x-ray diffractograms}, issn = {0021-8995}, doi = {10.1002/app.31849}, author = {Medhi, M. and Patil, A. S. and Halhalli, Mahadeo R. and Choubey, A. and Wadgaonkar, P. P. and Maldar, Noormahamad N.} } @article { ISI:000284728400014, title = {Organocatalytic asymmetric synthesis of (-)-delta-coniceine based on sequential proline-catalyzed asymmetric alpha-amination-HWE olefination}, journal = {Tetrahedron-Asymmetry}, volume = {21}, number = {19}, year = {2010}, month = {OCT}, pages = {2399-2401}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient asymmetric synthesis of (-)-delta-coniceine via sequential proline-catalyzed asymmetric alpha-amination and Horner-Wadsworth-Emmons olefination of an aldehyde with excellent enantiomeric excess (\>99\%) and high yields (overall yield 44\%) is described. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2010.08.009}, author = {Panchgalle, Sharad P. and Bidwai, Harshad B. and Chavan, Subhash P. and Kalkote, Uttam R.} } @article { ISI:000285797300007, title = {Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-O-x catalysts}, journal = {Journal of Natural Gas Chemistry}, volume = {19}, number = {6}, year = {2010}, month = {NOV}, pages = {593-599}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Alkaline earth metal (Mg, Ca, Sr and Ba)-doped Mo-V-Sb-O-x catalysts, prepared by a dry-up method, have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions. The catalysts have been characterized by N-2 adsorption-desorption, temperature-programmed desorption (TPD) of NH3, SEM and XRD. Influence of water vapor on the catalytic performance, particularly on the selectivities to acetic acid and acrylic acid, has also been studied. The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-O-x catalysts. The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals, which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid. The catalytic activity and product selectivities were found to be influenced by the reaction temperature, C3H8/O-2 ratio and space velocity. A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.

}, keywords = {Acetic acid, acrylic acid, alkaline earth doped Mo-V-Sb-O-x catalysts, oxidation of propane, Surface acidity}, issn = {1003-9953}, doi = {10.1016/S1003-9953(09)60122-5}, author = {Chaudhari, Chandan S. and Sable, Shailesh S. and Gurav, Hanumant and Kelkar, Ashutosh A. and Rane, Vilas H.} } @article { ISI:000274498300005, title = {Oxidative coupling of methane over La-promoted CaO catalysts: influence of precursors and catalyst preparation method}, journal = {Journal of Natural Gas Chemistry}, volume = {19}, number = {1}, year = {2010}, month = {JAN}, pages = {25-30}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The oxidative coupling of methane to C(2) hydrocarbons has been studied over a series of La-promoted CaO (La/Ca = 0.05) catalysts, prepared using different precursor salts for CaO and La(2)O(3) (viz. acetates, carbonates, nitrates and hydroxides) and catalyst preparation methods (viz. physical mixing of precursors, co-precipitation using ammonium carbonate/sodium carbonate as a precipitating agent), under different reaction conditions (temperature: 700-850 degrees C, CH(4)/O(2) ratio: 4.0 and 8.0, and GHSV: 51360 cm(3).g(-1).h(-1)). The surface area and surface basicity/base strength distribution of the catalysts have also been investigated. The surface properties and catalytic activity/selectivity of the La-promoted CaO catalysts vary from catalyst to catalyst depending on the catalyst precursors used and catalyst preparation method. The basicity/base strength distribution is strongly influenced by the precursors (for CaO and La(2)O(3)) and catalyst preparation method. Basicity (total and strong basic sites measured in terms of CO(2) chemisorbed at 50 degrees C and 500 degrees C, respectively) observed for the catalyst prepared by co-precipitation method is higher than that of the catalysts prepared by physical mixing method. The catalysts prepared by the nitrates of La- and Ca- and co-precipitated by the solution of sodium carbonate and ammonium carbonate exhibit different catalytic performance in OCM. The finding that no direct relationship between the surface basicity and catalytic activity/selectivity in OCM exists indicates that basicity is not solely responsible for obtaining high selectivity to C(2) hydrocarbons.

}, keywords = {basicity distribution, La-promoted CaO catalysts, oxidative coupling of methane}, issn = {1003-9953}, doi = {10.1016/S1003-9953(09)60023-2}, author = {Rane, Vilas H. and Chaudhari, Sopan T. and Choudhary, Vasant R.} } @article { ISI:000274348100003, title = {Polyarylate based thin film composite (TFC) membranes: effects of coating parameters, gutter layer, and intrinsic material properties}, journal = {Separation Science and Technology}, volume = {45}, number = {2}, year = {2010}, month = {JAN}, pages = {163-171}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Investigations in thin film composite (TFC) membrane formation with polyacrylonitrile ultrafiltration membrane as a support and three polyarylates with sequentially increased polarity are reported. Effects of TFC membrane preparation parameters viz., concentration of the coating solution, dip time, presence of solvent in pores of UF membrane support, and presence of the gutter layer were examined towards the formation of the selective skin layer, which was assessed by gas permeation analysis. TFC membranes prepared using dimethyl bisphenol-A based polyarylate exhibited similar to 3 orders of magnitude higher permeability and comparable selectivity as that of its dense membrane.

}, keywords = {Gas permeation, gutter layer, polarity, polyarylates, TFC membrane}, issn = {0149-6395}, doi = {10.1080/01496390903423089}, author = {Chendake, Yogesh J. and Bhole, Yogesh S. and Lohokare, Harshada R. and Kharul, Ulhas K.} } @article { ISI:000279139400020, title = {Preparation and characterization of CuInSe2 thin films by chemical bath deposition technique}, journal = {Journal of Alloys and Compounds}, volume = {500}, number = {1}, year = {2010}, month = {JUN}, pages = {78-81}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Copper indium diselenide (CIS) thin films have been deposited using a precursor solution containing copper sulphate, indium trichoride, hydrazine hydrate and sodium selenosulphate in an aqueous alkaline medium at room temperature. The as grown brown colored films were found to be well adherent to glass substrates. The films were characterized by X-ray diffraction, scanning electron microscopy, atomic absorption spectroscopy, optical absorption, electrical resistivity, and thermo electric measurement techniques. The analysis of optical absorption data shows band-gap energy (E-g) to be 1.1 eV. The electrical resistivity of the thin film was found to be of the order of 10(2) (Omega cm). Thermoelectric power measurement shows n-type conduction. (C) 2010 Published by Elsevier B.V.

}, keywords = {CuInSe2, Optical properties, Thin films, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2010.03.215}, author = {Hankare, P. P. and Rathod, K. C. and Chate, P. A. and Jadhav, A. V. and Mulla, Imtiaz S.} } @article {42795, title = {Process for synthesis of beaded cross linked polymers, water-in-oil-in-water emulsions and post functionalisation}, number = {2538/DEL}, year = {2010}, month = {JAN}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Reddy, Krishna Mohan Srinivasulu and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Tayal, Rajivkumar and Qureshi, Moham} } @article { ISI:000286161600003, title = {QTL mapping of 1000-kernel weight, kernel length, and kernel width in bread wheat (Triticum aestivum L.)}, journal = {Journal of Applied Genetics}, volume = {51}, number = {4}, year = {2010}, month = {DEC}, pages = {421-429}, publisher = {POLISH ACAD SCIENCES, INST PLANT GENETICS}, address = {STRZESZYNSKA 34, POZNAN, 60-479, POLAND}, abstract = {

Kernel size and morphology influence the market value and milling yield of bread wheat (Triticum aestivum L.). The objective of this study was to identify quantitative trait loci (QTLs) controlling kernel traits in hexaploid wheat. We recorded 1000-kernel weight, kernel length, and kernel width for 185 recombinant inbred lines from the cross Rye Selection 111 x Chinese Spring grown in 2 agro-climatic regions in India for many years. Composite interval mapping (CIM) was employed for QTL detection using a linkage map with 169 simple sequence repeat (SSR) markers. For 1000-kernel weight, 10 QTLs were identified on wheat chromosomes 1A, 1D, 2B, 2D, 4B, 5B, and 6B, whereas 6 QTLs for kernel length were detected on 1A, 2B, 2D, 5A, 5B and 5D. Chromosomes 1D, 2B, 2D, 4B, 53 and 5D had 9 QTLs for kernel width. Chromosomal regions with QTLs detected consistently for multiple year-location combinations were identified for each trait. Pleiotropic QTLs were found on chromosomes 2B, 2D, 4B, and 5B. The identified genomic regions controlling wheat kernel size and shape can be targeted during further studies for their genetic dissection.

}, keywords = {composite interval mapping, kernel shape, kernel size, quantitative trait loci, Stable QTLs, Triticum aestivum}, issn = {1234-1983}, doi = {10.1007/BF03208872}, author = {Ramya, P. and Chaubal, A. and Kulkarni, K. and Gupta, L. and Kadoo, Narendra Y. and Dhaliwal, Harcharan Singh and Chhuneja, Parveen and Lagu, Meena D. and Gupta, V.} } @article { ISI:000274490400085, title = {Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles}, journal = {Journal of Hazardous Materials}, volume = {175}, number = {1-3}, year = {2010}, month = {MAR}, pages = {680-687}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanoscale Fe-Pd bimetallic particles were synthesized and used for degradation of lindane (gamma-hexachlorocyclohexane) in aqueous solution. Batch studies showed that 5 mg/Lof lindane was completely dechlorinated within 5 min at a catalyst loading of 0.5 g/L and the degradation process followed first-order kinetics. GC-MS analysis in corroboration with GC-ECD results showed the presence of cyclohexane as the final degradation product. The proposed mechanism for the reductive dechlorination of lindane involves Fe corrosion-induced hydrogen atom transfer from the Pd Surface. The enhanced degradation efficiency of Fe-Pd nanoparticles is attributed to: (1) high specific surface area of the nanoscale metal particles (60 m(2)/g), manyfold greater that of commercial grade micro- or milli-scale iron particles (similar to 1.6 m(2)/g); and, (2) increased catalytic reactivity due to the presence of I{\textquoteright}d on the Surface. Recycling and column studies showed that these nanoparticles exhibit efficient and sustained catalytic activity. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic, Cyclohexane, Degradation, kinetics, Lindane, Nanoparticles}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2009.10.063}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000284533700013, title = {Regiospecific azidoiodination of alkenes with sodium periodate, potassium iodide, and sodium azide: a high-yield synthesis of beta-iodoazides}, journal = {Synthesis-Stuttgart}, number = {22}, year = {2010}, month = {NOV}, pages = {3879-3882}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The combination of sodium periodate, potassium iodide, and sodium azide has been found to be an efficient, simple, and inexpensive reagent system for azidoiodination of alkenes. The regiospecific 1,2-azidoiodination proceeds in an anti-Markovnikov fashion to produce beta-iodoazides in excellent yields.

}, keywords = {alkenes, azides, azidoiodination, beta-iodoazides, regio-specific}, issn = {0039-7881}, doi = {10.1055/s-0030-1258250}, author = {Chouthaiwale, Pandurang V. and Karabal, Pratibha U. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000275580600010, title = {Solvent-free selective oxidation of benzyl alcohol to benzaldehyde by tert-butyl hydroperoxide over U3O8-supported nano-gold catalysts}, journal = {Applied Catalysis A-General}, volume = {375}, number = {2}, year = {2010}, month = {MAR}, pages = {252-257}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Liquid-phase oxidation of benzyl alcohol to benzaldehyde by tertiary butyl hydroperoxide over different uranium oxide supported nano-gold catalysts in the absence of a solvent has been thoroughly investigated. The influences of catalyst parameters [viz, method of gold deposition (impregnation, co-precipitation, deposition-precipitation and homogeneous deposition-precipitation), gold loading (08 wt\%) and catalyst calcination temperature (100-900 degrees C)] on the catalyst performance have been investigated. The influence of reaction conditions [viz, reaction time (0-2 h) and temperature (25-94 degrees C)] on the process performance has also been studied. The Au/U3O8 catalyst prepared by the homogeneous deposition-precipitation and calcined at 400 degrees C showed very high activity (100\% benzyl alcohol conversion with \>85\% selectivity for benzaldehyde) in the process for a short reaction period (0.5 h) at 94 degrees C. The catalyst also showed excellent reusability in the process. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Au/U3O8 catalyst, Benzaldehyde, Benzyl alcohol, Nano-gold, Partial oxidation, tert-Butyl hydroperoxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2010.01.007}, author = {Choudhary, Vasant R. and Dumbre, Deepa K.} } @conference { ISI:000279938400011, title = {Static hyper-polarizability of open shell molecules computed at the FSMRCCSD level using constrained variational approach}, booktitle = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives}, series = {Astrophysics and Space Science Proceedings}, year = {2010}, note = {International Conference on Recent Advances in Spectroscopy - Theoretical, Astrophysical and Experimental Perspectives, Indian Inst Astrophys, Kodaikanal Observatory, Bangalore, INDIA, JAN 28-31, 2009}, month = {FEB}, pages = {99-109}, publisher = {Springer}, organization = {Springer}, address = {233 Spring Street, New York, NY 10013, United States}, abstract = {

In recent years, there has been a significant development in the analytic derivatives of energy with respect to electric fields based on the state-of-the-art multi-reference coupled-cluster method using Lagrangian based constrained variational approach. So far, the Lagrangian based Fock space multi-reference coupled cluster (FSMRCC) method has been successfully used to calculate electrical dipole moment and polarizability of open shell molecules, particularly, doublet radicals at the ground state and the electronic excited states of closed shell molecules. In this article, Lagrangian based FSMRCC method has been implemented for the first time for calculation of hyper polarizabilites of a few doublet radicals such as OH, OF, NO and NO(2). Orbital-relaxed finite field FSMRCC values are reported for comparison.

}, isbn = {978-3-642-10321-6}, issn = {1570-6591}, doi = {10.1007/978-3-642-10322-3_11}, author = {Bag, Arijit and Bhattacharya, S. and Pal, S.}, editor = {Chaudhuri, R. K. and Mekkaden, M. V. and Raveendran, A. V. and Narayanan, A. S.} } @article { ISI:000276190900021, title = {Structure and gelation mechanism of silk hydrogels}, journal = {Physical Chemistry Chemical Physics}, volume = {12}, number = {15}, year = {2010}, month = {FEB}, pages = {3834-3844}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Silk fibroin was regenerated from cocoons produced by the silkworm Bombyx Mori. Light scattering showed that an aqueous solution of the regenerated silk fibroin (RSF) was made of individual proteins with a weight average molar mass of about 4 x 10(5) g mol(-1) and a hydrodynamic radius of about 10 nm. Gel formation of RSF in acidic solutions was investigated as a function of the pH (2-4), concentration (0.5-10 g L(-1)) and temperature (5-70 degrees C). The structure of the gels was studied using light scattering and confocal laser scanning microscopy. The structure was found to be self-similar from length scales of less than 15 nm up to length scales of about 1 mm, and characterized by a correlation length of a few microns. Gel formation was tracked using turbidity, rheology, light scattering and circular dichroism. Gelation involves the formation of self-similar aggregates with a growth rate that increases exponentially. The protein aggregation is correlated to, and perhaps caused by, the formation of beta-sheets, the fraction of which also increases exponentially with time.

}, issn = {1463-9076}, doi = {10.1039/b916319k}, author = {Nagarkar, Shailesh and Nicolai, Taco and Chassenieux, Christophe and Lele, Ashish K.} } @article { ISI:000273580700038, title = {Structure, electronic structure, optical, and dehydrogenation catalytic study of (Zn1-zInz)(O1-xNx) solid solution}, journal = {Chemistry of Materials}, volume = {22}, number = {2}, year = {2010}, month = {JAN}, pages = {565-578}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Indium and nitrogen codoping in ZnO leads to a solid solution of InN in ZnO with I composition of(Zn1-zInz)(O1-xNx). A simple solution combustion method has been adopted to prepare the above materials in less than 10 min with metal nitrates as the metal loll source and urea as fuel. With reference to ZnO, significant increase in lattice parameters was observed with increasing In-content. However, the In2O3 phase was Observed along with InN for]it content \>= 10\%. Optical absorption extended into the Visible region, at least LIP to 550 nm, demonstrates an effective reduction of optical band gap due to the formation of solid Solution. A new feature observed just above O2p valence band in X-ray photoelectron spectroscopy (XPS) suggests the creation of N 2p states from InN; the N Is core level XPS result too confirms nitride contribution. Raman spectroscopy and secondary ion mass spectrometry results show direct In-N, Zn-N. and In-N-Zn fragments in (Zn1-zInz)(O1-x,N-x). Catalytic activity explored for Oxidation of 2-butanol to ethyl methyl ketone demonstrates a high selectivity at 350 and 400 degrees C. All of the above characteristics suggest the multifunctional nature of (Zn1-zInz)(O1-xNx) and its potential for other applications.

}, issn = {0897-4756}, doi = {10.1021/cm903368r}, author = {Mapa, Maitri and Sivaranjani, Kumarsrinivasan and Bhange, Deu S. and Saha, Biswajit and Chakraborty, Purushottam and Viswanath, Annamraju Kasi and Gopinath, Chinnakonda S.} } @article { ISI:000274839100053, title = {Synthesis and characterization of nickel selenide thin films deposited by chemical method}, journal = {Journal of Alloys and Compounds}, volume = {490}, number = {1-2}, year = {2010}, month = {FEB}, pages = {228-231}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Nickel selenide thin films have been deposited using chemical bath method on non-conducting glass substrates in a tartarate bath containing nickel sulphate octahydrate, hydrazine hydrate, sodium seleno-sulphate in an aqueous alkaline medium. The grown films were uniform, well adherent and black in color. The films were characterized using X-ray diffraction, scanning electron microscopy, optical absorption and electrical measurements. The nickel selenide thin film revealed polycrystalline nature with hexagonal system. The direct optical band gap of the film was found to be 1.61 eV. Electrical resistivity of film was observed in the order of 10(3) (Omega cm) with p-type conduction mechanism. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Crystal growth, Semiconductors, Thin films, X-ray diffraction}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2009.09.132}, author = {Hankare, P. P. and Jadhav, B. V. and Garadkar, K. M. and Chate, P. A. and Mulla, Imtiaz S. and Delekar, S. D.} } @article { ISI:000279836400026, title = {Synthesis and characterization of polyurethane-grafted single-walled carbon nanotubes via click chemistry}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {10}, number = {9}, year = {2010}, month = {SEP}, pages = {5700-5707}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Polyurethane (PU)-grafted carbon nanotubes were synthesized by the coupling of alkyne moiety decorated single walled carbon nanotube (SWCNT) with azide moiety containing PU using Cu(I) catalyzed Huisgen [3 + 2] cycloaddition click chemistry. The azide moiety containing poly(E-caprolactone)diol was synthesized by ring-opening polymerization and further used for PU synthesis. Alkyne-functionalizion of SWCNT was completed by the reaction of p-aminophenyl propargyl ether with SWCNT using a solvent free diazotization procedure. Nuclear magnetic resonance, Fourier transform infrared, and Raman spectroscopic measurements confirmed the functionalization of SWCNT. Scanning electron microscopy and transmission electron microscopy images showed an excellent dispersion of SWCNTs, and specially debundling of SWCNTs could be observed due to polymer assisted dispersion. A quantitative grafting was successfully achieved even at high content of functional groups.

}, keywords = {Carbon nanotubes, Click chemistry, dispersion, polyurethane}, issn = {1533-4880}, doi = {10.1166/jnn.2010.2434}, author = {Rana, Sravendra and Cho, Jae Whan and Kumar, Indresh} } @article { ISI:000273175100013, title = {Synthesis and corrosion protection aspects of poly(o-toluidine)/CdO nanoparticle composite coatings on mild steel}, journal = {Journal of Coatings Technology and Research}, volume = {7}, number = {1}, year = {2010}, month = {JAN}, pages = {119-129}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

This study examines the possibility of using poly(o-toluidine)/CdO (POT-CdO) nanoparticle composite coating for corrosion protection of mild steel in chloride environment. The POT-CdO nanoparticle composite coating was synthesized on mild steel from aqueous tartrate solution containing CdO-nanoparticles (size similar to 18 nm) by using cyclic voltammetry. These coatings were characterized by cyclic voltammetry, UV-Visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction measurements. The corrosion protection aspects of the resulting POT-CdO nanocomposite structure were investigated in aqueous 3\% NaCl solution by potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results of these investigations reveal that the POT-CdO nanoparticle composite acts as a protective coating on mild steel and reduces the corrosion rate of mild steel almost by factor of 70.

}, keywords = {CdO, Conducting polymer coatings, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, Mild steel, Nanocomposites, Poly(o-toluidine)}, issn = {1547-0091}, doi = {10.1007/s11998-008-9160-2}, author = {Chaudhari, Sudeshna and Gaikwad, A. B. and Patil, P. P.} } @article { ISI:000276573700013, title = {Synthesis of hybrid 1,2,3-triazolo-delta-lactams/lactones using Huisgen [3+2] cycloaddition {\textquoteleft}click-chemistry{\textquoteright} in water}, journal = {Tetrahedron-Asymmetry}, volume = {21}, number = {3}, year = {2010}, month = {MAR}, pages = {352-355}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The synthesis of a new class of hybrid 1,2,3-triazozlo-delta-lactams/lactones has been achieved using the Huisgen [3+2] dipolar cycloaddition {\textquoteleft}click-chemistry{\textquoteright} reaction of various organic azides with an activated alkyne in water, followed by cyclization. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2010.02.002}, author = {Kumar, Indresh and Rana, Sravendra and Cho, Jae Whan and Rode, Chandrashekhar V.} } @article { ISI:000275328000070, title = {Thermal conductivity measurement of polyglycol alkyl ethers at temperatures from (303.15 to 393.15) K}, journal = {Journal of Chemical and Engineering Data}, volume = {55}, number = {3}, year = {2010}, month = {MAR}, pages = {1449-1452}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Experimental Values of the thermal conductivity of five pure polyglycol alkyl ethers are presented in a temperature range from (303.15 to 393.15) K at a pressure of 1 MPa. Measurements were made with a Setaram C-80 II calorimetric device equipped with a suitable vessel Setup and ail auxiliary thermostat to measure at high-temperature conditions using the steady-state coaxial cylinders method. The measured values of the thermal conductivity were compared with data reported in the literature. The reliability and accuracy of the experimental method were confirmed with the measurements on pure benzene with well-known thermal conductivity values. Our data agreed with the limited data available in the literature and were correlated using an empirical expression. The Uncertainty of the results was estimated to be within 2.0 \%, and the reproducibility of the data was better than +/- 0.5 \%.

}, issn = {0021-9568}, doi = {10.1021/je900641w}, author = {Salavera, Daniel and Patil, Kashinath R. and Coronas, Alberto} } @article { ISI:000282830500007, title = {Unusual central indian drought of summer monsoon 2008: role of southern tropical indian ocean warming}, journal = {Journal of Climate}, volume = {23}, number = {19}, year = {2010}, month = {OCT}, pages = {5163-5174}, publisher = {AMER METEOROLOGICAL SOC}, address = {45 BEACON ST, BOSTON, MA 02108-3693 USA}, abstract = {

While many of the previous positive Indian Ocean dipole (IOD) years were associated with above (below)normal monsoon rainfall over central (southern) India during summer monsoon months [June-September (JJAS)], the IOD event in 2008 is associated with below (above)-normal rainfall in many parts of central (southern peninsular) India. Because understanding such regional organization is a key for success in regional prediction, using different datasets and atmospheric model simulations, the reasons for this abnormal behavior of the monsoon in 2008 are explored. Compared to normal positive IOD events, sea surface temperature (SST) and rainfall in the southern tropical Indian Ocean (STIO) in JJAS 2008 were abnormally high. Downwelling Rossby waves and oceanic heat advection played an important role in warming SST abnormally in the STIO. It was also found that the combined influence of a linear warming trend in the tropical Indian Ocean and warming associated with the IOD have resulted in abnormal warming of the STIO. This abnormal SST warming resulted in enhancement of convection in the southwest tropical Indian Ocean and forced anticyclonic circulation anomalies over the Bay of Bengal and central India, leading to suppressed rainfall over this region in JJAS 2008. The above mechanism is tested by conducting several model sensitivity experiments with an atmospheric general circulation model (AGCM). These experiments confirmed that the subsidence over central India and the Bay of Bengal was forced mainly by the anomalous warming in the STIO region driven by coupled ocean-atmosphere processes. This study provides the first evidence of combined Indian Ocean warming, associated with global warming, and IOD-related warming influence on Indian summer monsoon rainfall. The combined influence may force below-normal rainfall over central India by inducing strong convection in the STIO region. The conventional seesaw in convection between the Indian subcontinent and the eastern equatorial Indian Ocean may shift to the central equatorial Indian Ocean and the Bay of Bengal if the central Indian Ocean consistently warms in the global warming scenario.

}, issn = {0894-8755}, doi = {10.1175/2010JCLI3257.1}, author = {Rao, Suryachandra A. and Chaudhari, Hemantkumar S. and Pokhrel, Samir and Goswami, B. N.} } @article { ISI:000288274200014, title = {Adsorption of cresols on zinc-aluminium hydroxides - a comparison with zeolite-X}, journal = {Separation Science and Technology}, volume = {46}, number = {3}, year = {2011}, month = {JAN}, pages = {PII 934305034}, publisher = {TAYLOR \& FRANCIS INC}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

Liquid phase adsorption of m-cresol on Zn-Al hydroxide adsorbents with three different Zn/Al molar ratios was studied in different solvents and compared with commercial zeolite 13X. Among the three adsorbents, ZA-16 showed adsorption capacity similar to commercial zeolite 13X. Solvents used for the preparation of m-cresol solution were found to influence the adsorption capacity. The adsorption capacity was maximum for the solution of m-cresol in n-hexane. Conventional Langmuir and Freundlich adsorption isotherm equations were used to explain the adsorption behavior. The kinetics of m-cresol adsorption followed the first-order Lagergren kinetic model. p-Cresol/m-cresol separation factor was the highest when toluene was used as the organic medium.

}, keywords = {Adsorption, cresol, zeolite, zinc-aluminium hydroxide}, issn = {0149-6395}, doi = {10.1080/01496395.2010.510494}, author = {Vijayakumar, J. and Chikkala, Suresh K. and Mandal, Sujata and Mayadevi, S.} } @article { ISI:000286766600016, title = {Amino functionalized zeolitic tetrazolate framework (ZTF) with high capacity for storage of carbon dioxide}, journal = {Chemical Communications}, volume = {47}, number = {7}, year = {2011}, month = {JAN}, pages = {2011-2013}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A three dimensional -NH(2) functionalized Zeolitic Tetrazolate Framework (ZTF-1) has been reported. The framework adopts a dia topology (M-L-M angle is close to 156 degrees). ZTF-1 shows high CO(2) (273 K) and H(2) (77 K) uptake due to the presence of the free -NH(2) group and uncoordinated tetrazolate nitrogen.

}, issn = {1359-7345}, doi = {10.1039/c0cc04169f}, author = {Panda, Tamas and Pachfule, Pradip and Chen, Yifei and Jiang, Jianwen and Banerjee, Rahul} } @article { ISI:000294572800023, title = {Antifungal activity of novel synthetic peptides by accumulation of reactive oxygen species (ROS) and disruption of cell wall against Candida albicans}, journal = {Peptides}, volume = {32}, number = {8}, year = {2011}, month = {AUG}, pages = {1732-1740}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

In the present work, we investigated the antifungal activity of two de novo designed, antimicrobial peptides VS2 and VS3, incorporating unnatural amino acid alpha,beta-dehydrophenylalanine (Delta Phe). We observed that the low-hemolytic peptides could irreversibly inhibit the growth of various Candida species and multidrug resistance strains at MIC(80) values ranging from 15.62 mu M to 250 mu M. Synergy experiments showed that MIC(80) of the peptides was drastically reduced in combination with an antifungal drug fluconazole. The dye PI uptake assay was used to demonstrate peptide induced cell membrane permeabilization. Intracellular localization of the FITC-labeled peptides in Candida albicans was studied by confocal microscopy and FACS. Killing kinetics, PI uptake assay, and the intracellular presence of FITC-peptides suggested that growth inhibition is not solely a consequence of increased membrane permeabilization. We showed that entry of the peptide in Candida cells resulted in accumulation of reactive oxygen species (ROS) leading to cell necrosis. Morphological alteration in Candida cells caused by the peptides was visualized by electron microscopy. We propose that de novo designed VS2 and VS3 peptides have multiple detrimental effects on target fungi, which ultimately result in cell wall disruption and killing. Therefore, these peptides represent a good template for further design and development as antifungal agents. (C) 2011 Elsevier Inc. All rights reserved.

}, keywords = {Antifungal peptides, Candida albicans, Cell wall, ROS}, issn = {0196-9781}, doi = {10.1016/j.peptides.2011.06.003}, author = {Maurya, Indresh Kumar and Pathak, Sarika and Sharma, Monika and Sanwal, Hina and Chaudhary, Preeti and Tupe, Santosh and Deshpande, Mukund V. and Chauhan, Virander Singh and Prasad, Rajendra} } @article { ISI:000292893300014, title = {Assembly of polyethyleneimine in the hexagonal mesophase of nonionic surfactant: effect of pH and temperature}, journal = {Journal of Physical Chemistry B}, volume = {115}, number = {29}, year = {2011}, month = {JUL}, pages = {9059-9069}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We investigate the dispersion of a pH responsive polymer, polyethyleneimine, PEI, in a hexagonal (H(1)) mesophase of a nonionic surfactant, C(12)E(9), and water, at pH ranging from basic (pH = 12.8) to acidic (pH = 1). While the C(12)E(9)/H(2)O phase behavior is independent of pH, we demonstrate that, in the PEI/C(12)E(9)/H(2)O system, changing the pH influences PEI-C(12)E(9) interactions, and thus, influences the isotropic-H(1) phase transition. With decrease in pH, there is increasing protonation of the PEI chain, and consequently, the chain extends. We show, using a combination of SAXs, optical microscopy and visual experiments, that the inclusion of PEI in a 1:1 surfactant water mixture, lowers the hexagonal-isotropic transition temperature, T. At higher pH = 12.8 T(HI) shows a pronounced decrease from SO to 13 degrees C on addition of PEI, and the PEI/C(12)E(9)/H(2)O system forms a transparent gel. At pH = 1, we observe qualitatively different behavior and an opaque gel forms below T(HI)= 25 degrees C. The isotropic-H(1) transition, in turn, influences the phase separation of PEI chains from the C(12)E(9)/H(2)O system. 2D NMR ROESY data provides evidence that there are strong surfactant PEI interactions at high pH that significantly reduce at lower pH. The NMR data is in accord with molecular dynamics simulations that show that surfactants strongly aggregate with unprotonated PEI chains, but not with fully protonated chains; thus, in this system, the pH controls a cascade of microstructural organization: increasing pH decreases chain protonation and increases polymer-surfactant interactions, resulting in suppression of the isotropic-H(1) transition to lower temperatures, thus, influencing the phase separation of PEI from the surfactant/water system.

}, issn = {1520-6106}, doi = {10.1021/jp202614x}, author = {Sharma, Kamendra P. and Choudhury, Chandan Kumar and Srivastava, Sonal and Davis, Hilda C. and Rajamohanan, P. R. and Roy, Sudip and Kumaraswamy, Guruswamy} } @article { ISI:000296414700021, title = {Assimilatory potential of helicoverpa armigera reared on host (chickpea) and nonhost (cassia tora) diets}, journal = {Journal of Proteome Research}, volume = {10}, number = {11}, year = {2011}, month = {NOV}, pages = {5128-5138}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Adaptation to plant allelochemicals is a crucial aspect of herbivore chemical ecology. To understand an insect ecology, we studied an effect of nonhost Cassia tora seed-based diet (Ct) on growth, development, and molecular responses in Helicoverpa armigera. We employed a comparative approach to investigate the proteomic differences in gut, hemolymph, and frass of H. armigera reared on a normal (chickpea seed-based, Cp) and Ct diet. In this study, a total of 46 proteins were identified by nano-LC-MS(E). Among them, 17 proteins were up-regulated and 29 proteins were down-regulated when larvae were exposed to the Ct diet. Database searches combined with GO analysis revealed that gut proteases engrossed in digestion, proteins crucial for immunity, adaptive responses to stress, and detoxification were down-regulated in the Ct fed larvae. Proteins identified in H. armigera hemolymph were found to be involved in defense mechanisms. Moreover, proteins found in frass of the Ct fed larvae were observed to participate in energy metabolism. Biochemical and quantitative real-time PCR analysis of selected candidate proteins showed differential gene expression patterns and corroborated with the proteomic data. Our results suggest that the Ct diet could alter expression of proteins related to digestion, absorption of nutrients, adaptation, defense mechanisms, and energy metabolism in H. armigera.

}, keywords = {adaptation, Cassia tora, Gene expression, Helicoverpa armigera, proteomics}, issn = {1535-3893}, doi = {10.1021/pr200591m}, author = {Dawkar, Vishal V. and Chikate, Yojana R. and Gupta, Vidya S. and Slade, Susan E. and Giri, Ashok P.} } @article { ISI:000286862200012, title = {Asymmetric total synthesis of (2S,3S)-3-hydroxypipecolic acid}, journal = {Tetrahedron Letters}, volume = {52}, number = {3}, year = {2011}, month = {JAN}, pages = {404-406}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A synthetic route to (2S,3S)-3-hydroxypipecolic acid was achieved from readily available nonchiral pool starting material cis-2-butene-1,4-diol and involved Claisen orthoester rearrangement, Sharpless asymmetric dihydroxylation and intramolecular lactamisation of azido lactone as the key steps. (C) 2010 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.11.062}, author = {Chavan, Subhash P. and Dumare, Nilesh B. and Harale, Kishor R. and Kalkote, Uttam R.} } @article { ISI:000295890100006, title = {Bicyclic amino acid-carbohydrate-conjugates as conformationally restricted hydroxyethylamine (HEA) transition-state isosteres}, journal = {Organic \& Biomolecular Chemistry}, volume = {9}, number = {21}, year = {2011}, month = {SEP}, pages = {7300-7302}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication describes a general synthetic route to bicyclic amino acid-carbohydrate-conjugates, which would be useful as conformationally restricted hydroxyethylamine (HEA) transition-state isosteres. The synthesis was achieved in 12 steps starting from D-glucose. The striking features of this system are the bicyclic rigid core displaying an a-amino acid side chain and hydroxyethylamine moiety - both of which would be potentially important for receptor interactions, leading to various biomedical responses, as described in the literature. Crystal structure investigation suggested extensive intermolecular hydrogen-bonding interactions in this system, involving the backbone amide and hydroxyl groups.

}, issn = {1477-0520}, doi = {10.1039/c1ob06215h}, author = {Kale, Sangram S. and Chavan, Sanjay T. and Sabharwal, Sushma G. and Puranik, Vedavati G. and Sanjayan, Gangadhar J.} } @article { ISI:000291879600008, title = {Biochemical characterisation of alpha-amylase inhibitors from achyranthes aspera and their interactions with digestive amylases of coleopteran and lepidopteran insects}, journal = {Journal of the Science of Food and Agriculture}, volume = {91}, number = {10}, year = {2011}, month = {AUG}, pages = {1773-1780}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

BACKGROUND: Starchy seeds are an important food and a source of dietary ingredients in many countries. However, they suffer from extensive predation by bruchids (weevils) and other pests. alpha-Amylase inhibitors are attractive candidates for the control of seed weevils, as these insects are highly dependent on starch as an energy source. RESULTS: A proteinaceous alpha-amylase inhibitor from the seeds of Achyranthes aspera was identified, purified and characterised. In electrophoretic analysis, two prominent amylase inhibitor activity bands (AI1 and AI2) were detected. The inhibitor was purified 9.99-fold with 1206.95 total amylase inhibitor units mg(-1) protein. The molecular weight of the purified inhibitor was around 6 kDa. The isolated alpha-amylase inhibitor was found to be resistant to heat and proteolysis. Feeding analysis of Callosobruchus maculatus larvae on a diet containing seed powder of A. aspera revealed that survival of the larvae was severely affected, with the highest mortality rate occurring on the fifth day of feeding. The isolated inhibitor inhibited the majority of amylase isoforms of C. maculatus, Tribolium confusum and Helicoverpa armigera in electrophoretic analysis and solution assays. CONCLUSION: The information obtained in the present investigation could be useful for a genetic engineering approach that would make seeds resistant to storage pest infestations. (C) 2011 Society of Chemical Industry

}, keywords = {Achyranthes aspera, Amylase inhibitors, amylases, Callosobruchus maculatus, Tribolium confusum}, issn = {0022-5142}, doi = {10.1002/jsfa.4380}, author = {Hivrale, Vandana K. and Chougule, Nanasaheb P. and Giri, Ashok P. and Chhabda, Pavan J. and Kachole, Andmanvendra S.} } @article {42767, title = {Bioresponsive mesoporous silica nanoparticles for triggered drug release}, journal = {Journal of the Americal Chemical Society}, volume = {133}, year = {2011}, month = {DEC}, pages = {19582-19585}, doi = {10.1021/ja206998x}, author = {Singh, Neetu and Karambelkar, Amrita and Gu, Luo and Lin, Kevin and Miller, Jordan S. and Chen, Christopher S. and Sailor, Michael J. and Bhatia, Sangeeta N.} } @conference { ISI:000291982804665, title = {Combustion synthesis to incorporate nitrogen in ZnO and TiO2 and their applications in solar energy harvesting}, booktitle = { 241st National Meeting and Exposition of the American-Chemical-Society (ACS)}, volume = {241}, year = {2011}, note = {241st National Meeting and Exposition of the American-Chemical-Society (ACS), Anaheim, CA, MAR 27-31, 2011}, month = {MAR}, publisher = {American Chemical Society}, organization = {American Chemical Society}, address = {1155 16th ST, NW, Washington, DC 20036 USA}, issn = {0065-7727}, author = {Chinnakonda, Gopinath S.} } @article {43255, title = {Comparative genomics of the pathogenic ciliate Ichthyophthirius multifiliis, its free-living relatives and a host species provide insights into adoption of a parasitic lifestyle and prospects for disease control}, journal = {Genome Biology}, volume = {12}, year = {2011}, month = {OCT}, pages = {Article Number: R100}, abstract = {Background: Ichthyophthirius multifiliis, commonly known as Ich, is a highly pathogenic ciliate responsible for {\textquoteright}white spot{\textquoteright}, a disease causing significant economic losses to the global aquaculture industry. Options for disease control are extremely limited, and Ich{\textquoteright}s obligate parasitic lifestyle makes experimental studies challenging. Unlike most well-studied protozoan parasites, Ich belongs to a phylum composed primarily of free-living members. Indeed, it is closely related to the model organism Tetrahymena thermophila. Genomic studies represent a promising strategy to reduce the impact of this disease and to understand the evolutionary transition to parasitism. Results: We report the sequencing, assembly and annotation of the Ich macronuclear genome. Compared with its free-living relative T. thermophila, the Ich genome is reduced approximately two-fold in length and gene density and three-fold in gene content. We analyzed in detail several gene classes with diverse functions in behavior, cellular function and host immunogenicity, including protein kinases, membrane transporters, proteases, surface antigens and cytoskeletal components and regulators. We also mapped by orthology Ich{\textquoteright}s metabolic pathways in comparison with other ciliates and a potential host organism, the zebrafish Danio rerio. Conclusions: Knowledge of the complete protein-coding and metabolic potential of Ich opens avenues for rational testing of therapeutic drugs that target functions essential to this parasite but not to its fish hosts. Also, a catalog of surface protein-encoding genes will facilitate development of more effective vaccines. The potential to use T. thermophila as a surrogate model offers promise toward controlling {\textquoteright}white spot{\textquoteright} disease and understanding the adaptation to a parasitic lifestyle.}, doi = {10.1186/gb-2011-12-10-r100}, author = {Coyne, Robert S. and Hannick, Linda and Shanmugam, Dhanasekaran and Hostetler, Jessica B. and Brami, Daniel and Joardar, Vinita S. and Johnson, Justin and Radune, Diana and Singh, Irtisha and Badger, Jonathan H. and Kumar, Ujjwal and Saier, Milton and Wang, Yufeng and Cai, Hong and Gu, Jianying and Mather, Michael W. and Vaidya, Akhil B. and Wilkes, David E. and Rajagopalan, Vidyalakshmi and Asai, David J. and Pearson, Chad G. and Findly, Robert C. and Dickerson, Harry W. and Wu, Martin and Martens, Cindy and Van de Peer, Yves and Roos, David S. and Cassidy-Hanley, Donna M. and Clark, Theodore G.} } @article {42532, title = {Comparative study of porphyrin derivatives in monolayers at the air-water interface and in langmuir-blodgett films}, journal = {Thin Solid Films}, volume = {519}, year = {2011}, month = {MAR}, pages = {8066{\textendash}8073}, abstract = {

The orientation and aggregation of various porphyrin derivatives at the air{\textendash}water interface and in Langmuir{\textendash}Blodgett films were investigated. Monolayer properties of these molecules, where long alkyl chain(s) were covalently bound through different functionality of varying hydrophilicity were studied by measuring surface pressure area isotherms. Such derivatives, where ether functionality (functionalities) was (were) used for linking long alkyl chain(s), did not form uniform monolayer; instead they were found to form multilayer clusters or aggregates on the water surface. On the other hand, porphyrin derivative functionalized at the four peripheral phenyl rings with eight hexadecyl ether chains formed stable spherical vesicles when deposited on mica. Tetra N-alkyl pyridinium porphyrins with long alkyl chain were found to form various phases on the water surface. Evidence of transition from horizontal orientation to vertical orientation of porphyrin rings of porphyrin molecules having C14 chains was observed. This type of transition was lost with the porphyrin molecule with a relatively smaller chain (C8).

}, doi = {10.1016/j.tsf.2011.02.082}, author = {Ghosh, Amrita and Mahato, Prasenjit and Choudhury, Sipra and Das, Amitava} } @article { ISI:000291410900022, title = {Controlling stoichiometry in low temperature synthesis of La0.7Sr0.3MnO3 nanoparticles}, journal = {Advanced Science Letters}, volume = {4}, number = {2}, year = {2011}, month = {FEB}, pages = {424-430}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Nanoparticles of complex oxides (\<20 nm) are desirable for several applications in view of the diverse range of physical properties of such oxides. However the simultaneous presence of multiple cation precursors makes the corresponding chemical synthesis non-trivial with possible intermediate evolution of secondary phases. Such phases could react at high temperatures to form the desired stoichiometry, but this process is diffusion limited and can lead to larger particles. In this work we examine the role of three different reaction and growth controlling additives, namely dextran, citric acid and hexamine, on the synthesis of the well known colossal magneto-resistive (CMR) manganite La0.7Sr0.3MnO3. We demonstrate that phase evolutions differ significantly in the three cases, and the physical properties of the products also differ dramatically. Only dextran is shown to yield the desired phase with faceted nanoparticles at as low a temperature as 600 degrees C. A high saturation moment of similar to 47 emu/gm is realized at 10 K with a good square hysteresis loop. In 650 degrees C annealed sample, room temperature magnetization of similar to 15 emu/gm was obtained, which brings the nanoparticles in the applicability domain.

}, keywords = {Citric acid, Complex Oxide, Dextran, Hexamine, hydrothermal}, issn = {1936-6612}, doi = {10.1166/asl.2011.1230}, author = {Azarifar, Ali and Yadav, P. A. and Chawla, A. K. and Jog, Jyoti Prakash and Patil, S. I. and Chandra, Ramesh and Ogale, S. B.} } @article { ISI:000291139700014, title = {Convenient formal synthesis of (2S,3S)-3-hydroxy pipecolic acid}, journal = {Tetrahedron-Asymmetry}, volume = {22}, number = {5}, year = {2011}, month = {MAR}, pages = {587-590}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A convenient synthesis of (2S,3S)-3-hydroxy pipecolic acid starting from inexpensive and easily available L-(+)-tartaric acid has been described. (C) 2011 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2011.02.023}, author = {Chavan, Subhash P. and Harale, Kishor R. and Dumare, Nilesh B. and Kalkote, Uttam R.} } @article {42714, title = {Cyclodiphosph(III)azane chemistry {\textendash} ylides from the reaction of [(RNH)P-N(t-Bu)]2 [R = t-Bu, i-Pr] with dimethyl maleate and chiral ansa-type derivatives from reaction of [ClP-N(t-Bu)]2 with a substituted BINOL}, journal = {Inorganica Chimica Acta}, volume = {372}, year = {2011}, month = {JUN}, pages = {374{\textendash}382}, abstract = {

Use of a simple inorganic ring system with the cyclodiphosph(III)azane skeleton [e.g. [(RNH)P-N(t-Bu)]2 [R = t-Bu (7), i-Pr (8)] to probe some of the intermediates proposed in phosphine mediated organic reactions is highlighted. Thus the reaction of 7{\textendash}8 with the allenylphosphine oxide Ph2P(O)C(Ph)double bond; length as m-dashCdouble bond; length as m-dashCH2 (9) affords the phosphinimines [(RNH)P(μ-N-t-Bu)2P(double bond; length as m-dashN-R)-C(double bond; length as m-dashCH2)CH(Ph)-P(O)Ph2] [R = t-Bu (10), i-Pr (11)], while a similar reaction of 7{\textendash}8 with dimethyl maleate (or dimethyl fumarate) affords the ylides [(RNH)P(μ-N-t-Bu)2P(NH-R)double bond; length as m-dashC(CO2Me)-CH2(CO2Me) [R = t-Bu (18), i-Pr (19)]. The implication of such reactions on phosphine mediated organic transformations including Morita{\textendash}Baylis{\textendash}Hillman reaction is mentioned. In a rather rare type of situation, an unusually long phosphoryl (Pdouble bond; length as m-dashO) bond [1.538 (5) {\r A}] as revealed the X-ray structure of {(R)-6,6'-(t-Bu)2-1,1'-(C10H5)2-2,2'-O2-}{P(O)(N-t-Bu)2-P(Se)} (27) is rationalized by means of crystallographic disorder in packing after comparing the data with that in the literature and {1,1'-(C10H6)2-2,2'-O2}{P(Se)(N-t-Bu)2-P(Se)} (29). X-ray structures of the new compounds 10{\textendash}11, 18{\textendash}19, 27 and 29 are discussed. Compound 10 crystallizes in the chiral space group Pca2(1) with (S)-chirality at the carbon center [{\textendash}C(double bond; length as m-dashCH2)CH(Ph)-P] suggesting a case of spontaneous resolution through crystallization.

}, doi = {10.1016/j.ica.2010.12.072}, author = {Swamy, K.C. Kumara and Gangadhararao, G. and Srinivas, Venu and Kumar, N. N. Bhuvan and Balaraman, Ekambaram and Chakravarty, Manab} } @article { ISI:000293637800009, title = {Degradation of tannic acid by cold-adapted klebsiella sp NACASA1 and phytotoxicity assessment of tannic acid and its degradation products}, journal = {Environmental Science and Pollution Research}, volume = {18}, number = {7}, year = {2011}, month = {AUG}, pages = {1129-1138}, publisher = {SPRINGER HEIDELBERG}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

The focus of the present study is to know the potential of bacterial isolate for tannic acid degradation at low temperature. Also, we tried to evaluate the suitability of phytotoxicity testing protocol for the determination of tannic acid toxicity. Screening for tannic acid degrading bacterial strains was carried out by using microbial isolation techniques. The 16S rDNA amplicon of the isolate was used to identify the isolate. The effect of different concentrations of tannic acid and its degradation products on germination of Vigna unguiculata was evaluated. The study was carried out to determine total sugar and starch content of the used seeds and even to check the presence of alpha-amylase activity during seed germination. The isolated bacterium was identified as Klebsiella sp NACASA1 and it showed degradation of tannic acid in 40 (+/- 0.85***) h at 15A degrees C and pH 7.0. A gradual decrease in root/shoot length was observed with increasing concentration of tannic acid. There was 95.11 (+/- 0.24**)\% inhibition in alpha-amylase activity at 20,000 ppm tannic acid, as compared to control. No such effects were observed on germination, root-shoot length, and alpha-amylase activity with tannic acid degradation products. The results obtained confirmed that tannic acid may act as a toxic agent in plant cells. The simple biodegradation process presented in this study was found to be effective in reducing toxicity of tannic acid. Also, it reveals the potential of soil bacterium to degrade tannic acid at low temperature.

}, keywords = {Cold-adapted bacterium, Phytotoxicity, Tannic acid degradation}, issn = {0944-1344}, doi = {10.1007/s11356-011-0468-6}, author = {Jadhav, Umesh and Kadu, Sudhir and Thokal, Nilesh and Padul, Manohar and Dawkar, Vishal V. and Chougale, Ashok D. and Salve, Abhay and Patil, Manoj} } @article { ISI:000294437300035, title = {Ecofriendly hydrogen production from abundant hydrogen sulfide using solar light-driven hierarchical nanostructured ZnIn2S4 photocatalyst}, journal = {Green Chemistry}, volume = {13}, number = {9}, year = {2011}, month = {JUL}, pages = {2500-2506}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

It is quite well-known that refineries are producing huge amount of H2S which has been used to produce sulphur and water using the well-known Claus process. This process is not an economically viable process, due to the high-cost chemical process and creates further acute environmental problems. Therefore, we have demonstrated the conversion of poisonous H2S into H-2 using an ecofriendly phocatalysis process which is a green unconventional energy source. We have investigated ecofriendly nanostructured ZnIn2S4 photocatalyst to produce hydrogen from H2S using solar light. We also demonstrate the controlled synthesis of hierarchical nanostructured ZnIn2S4 using a facile hydrothermal method. The morphologies obtained have been greatly influenced by the presence of triethylamine (TEA) with various concentrations during the reaction. Surprisingly, a highly crystalline hexagonal layer structured ZnIn2S4 was obtained instead of cubic spinel. The hierarchical nanostructure, i.e. marigold flower-like morphology, was obtained without any surfactant. The thin and transparent petals self-assembled to form the unique nanostructured marigold flower. The highly crystalline puffy marigold flowers and nanoplates/nanostrips were obtained using TEA-assisted hydrothermal synthesis. Optical study shows the band gap in the range of 2.34-2.48 eV. Considering the band gap in the visible region, ZnIn2S4 is used as photocatalyst for hydrogen production from hydrogen sulphide under solar light which is hitherto unattempted. The constant photocatalytic activity of hydrogen evolution, i.e. 5287 mu mol h(-1), was obtained using such hierarchical nanostructured ZnIn2S4 under visible light irradiation. It is noteworthy that the H-2 evolution rate obtained is much higher compared to earlier reported photocatalysts. Considering the significance of morphologies for photocatalytic application, the formation mechanism has also been furnished. The unique hierarchical nanostructured ZnIn2S4 ternary semiconductor having hexagonal layer will have potential applications in solar cells, LEDs, charge storage, electrochemical recording, thermoelectricity and other prospective electronic and optical devices.

}, issn = {1463-9262}, doi = {10.1039/c1gc15515f}, author = {Chaudhari, Nilima S. and Bhirud, Ashwini P. and Sonawane, Ravindra S. and Nikam, Latesh K. and Warule, Sambhaji S. and Rane, Vilas H. and Kale, Bharat B.} } @article { ISI:000287466900022, title = {Effect of tethering on the structure-property relationship of TPU-dual modified laponite clay nanocomposites prepared by ex-situ and in-situ techniques}, journal = {Polymer}, volume = {52}, number = {4}, year = {2011}, month = {FEB}, pages = {1071-1083}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Novel Thermoplastic Polyurethane (TPU)-dual modified Laponite clay nanocomposites were prepared by ex-situ and in-situ techniques. Two types of modified clays used in this work differ from each other by the number of active functional groups (tethering). Modified nanoclays are characterized by FTIR, Solid State NMR, XRD and TGA. Structural differences in the modified clays lead to novel tubular, elliptical and spherically aggregated morphologies of clays together with the hard segments of TPU. Changes in such morphology result in the difference in segmental relaxation, mechanical and rheological properties of the nanocomposites. In-situ prepared nanocomposites register inferior properties as compared to their ex-situ counterparts. The percent improvement in tensile strength and elongation at break of the ex-situ prepared nanocomposites with the modified clay having lesser tethering are found to be 67\% and 208\%, respectively. Thermal stability is enhanced by 35 degrees C as compared to that of the neat TPU. (C) 2010 Published by Elsevier Ltd.

}, keywords = {Dual modification, Nanocomposites, Thermoplastic polyurethane}, issn = {0032-3861}, doi = {10.1016/j.polymer.2010.10.010}, author = {Mishra, Ananta K. and Chattopadhyay, Santanu and Rajamohanan, P. R. and Nando, Golok B.} } @article { ISI:000291182100026, title = {Efficiency and recycling capability of montmorillonite supported Fe-Ni bimetallic nanocomposites towards hexavalent chromium remediation}, journal = {Applied Catalysis B-Environmental}, volume = {104}, number = {3-4}, year = {2011}, month = {MAY}, pages = {407-414}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The remediation of Cr(VI) from simulated water streams is investigated using Fe-Ni bimetallic nanoparticles (Fe-Ni NPs) and their nanocomposites prepared with montmorillonite (MMT) clay. These nanocomposites are characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analyses. XRD analysis revealed proper dispersion as well as intercalation of Fe-Ni NPs in the clay matrix. TEM of nanocomposites showed the presence of spherical particles having a size of 20-40 nm. Batch experiments with a 25 mg L(-1) Cr(VI) solution and 2 g L-1 Fe-Ni NPs exhibited complete reduction of Cr(VI) within 10 min that follows first order reaction kinetics. Amongst 25\%, 50\%, 75\% in situ and loaded nanocomposites, 75\% compositions possess better activity with enhanced reduction capacity below pH 4 due to generation of reactive H center dot species. XPS analysis of nanocomposites after Cr(VI) treatment suggested that reduction process occurs through Cr(111) formation followed by its subsequent reduction to Cr(0). Their potentiality towards reusage is established from the recycling experiments that revealed the order of efficiency as 75\% in situ \> Fe-Ni NPs \> 75\% loaded nanocomposites. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Cr(VI) remediation, Iron-nickel bimetallics, Montmorillonite, Nanocomposites, Recycling}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2011.02.011}, author = {Kadu, Brijesh S. and Sathe, Yogesh D. and Ingle, Abhijit B. and Chikate, Rajeev C. and Patil, Kashinath R. and Rode, Chandrashekhar V.} } @proceedings { ISI:000291982802475, title = {Electronic decoupling of surface layers and its influence in oxidation catalysis: More wine in old bottle}, volume = {241}, year = {2011}, note = {241st National Meeting and Exposition of the American-Chemical-Society (ACS), Anaheim, CA, MAR 27-31, 2011}, month = {MAR}, publisher = {American-Chemical-Society}, address = {1155 16th ST, NW, Washington, DC 20036 USA}, issn = {0065-7727}, author = {Chinnakonda, Gopinath S.} } @article { ISI:000296725000043, title = {Enhanced dielectric permittivity in poly (vinylidene) fluoride/multiwalled carbon nanotubes nanocomposite thin films fabricated by pulsed laser deposition}, journal = {Applied Surface Science}, volume = {258}, number = {3}, year = {2011}, month = {NOV}, pages = {1256-1260}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The fabrication of high quality thin films of poly (vinylidene fluoride) embedded with multiwalled carbon nanotubes using pulsed laser deposition technique is reported. The prepared films were characterized for structural, morphology and dielectric properties. The morphology analysis revealed uniform dispersion of multiwalled carbon nanotubes throughout the polymer matrix. X-ray diffraction results suggested that the poly (vinylidene fluoride) film is in amorphous phase while addition of multiwalled carbon nanotubes showed presence of crystalline peaks in the nanocomposites films. It was interesting to note that the nanocomposite films exhibits significant enhancement of the ferroelectric beta-phase as evidenced by the X-ray diffraction and Fourier transform infrared spectroscopy results. The dielectric analysis shows a remarkable enhancement in the dielectric permittivity of nanocomposites with lower loss and conductivity level. The results can be attributed to the formation of minicapacitor network and relatively higher percolation threshold in the nanocomposites. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Dielectric permittivity, Ferroelectric polymer, Percolation threshold, pulsed laser deposition, Thin films}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2011.09.087}, author = {Chanmal, Chetan and Deo, Meenal S. and Jog, Jyoti Prakash} } @article { ISI:000296390600030, title = {Experimental and computational approach of understanding the gas adsorption in amino functionalized interpenetrated metal organic frameworks (MOFs)}, journal = {Journal of Materials Chemistry}, volume = {21}, number = {44}, year = {2011}, month = {OCT}, pages = {17737-17745}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two isostructural, three dimensional, interpenetrated, amino (-NH2) functionalized Metal Organic Frameworks [Cd(ANIC)(2)] (Cd-ANIC-1) and [Co(ANIC)(2)] (Co-ANIC-1) with amine-lined pores have been reported. The framework adopts dia topology with interpenetration. Cd-ANIC-1 and Co-ANIC-1 show high CO2 (273 K) and H-2 (77 K) uptake due to the presence of free -NH2 groups and framework interpenetration. The effect of interpenetration and amino functionalization on gas uptake properties of MOFs has been analysed experimentally and computationally, in the isostructural MOFs Cd-ANIC-1 and Co-ANIC-1.

}, issn = {0959-9428}, doi = {10.1039/c1jm13762j}, author = {Pachfule, Pradip and Chen, Yifei and Jiang, Jianwen and Banerjee, Rahul} } @article { ISI:000290409100007, title = {Exploration of L-proline-catalyzed -aminoxylation of aldehyde to (S)-guaifenesin-related drug molecules}, journal = {Synthetic Communications}, volume = {41}, number = {13}, year = {2011}, month = {MAY}, pages = {PII 937137930}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

[image omitted] An efficient enantioselective synthesis of (S)-guaifenesin with 99\% ee using L-proline-catalyzed -aminoxylation of aldehyde as key step is described and explored for asymmetric syntheses of (S)-moprolol and (R)-methocarbamol.

}, keywords = {-Aminoxylation, guaifenesin, methocarbamol, moprolol, Proline}, issn = {0039-7911}, doi = {10.1080/00397911.2010.493631}, author = {Panchgalle, Sharad P. and Kunte, Sunita S. and Chavan, Subhash P. and Kalkote, Uttam R.} } @article { ISI:000295256100039, title = {Genome sequence of rheinheimera sp strain A13L, isolated from pangong lake, india}, journal = {Journal of Bacteriology}, volume = {193}, number = {20}, year = {2011}, month = {OCT}, pages = {5873-5874}, publisher = {AMER SOC MICROBIOLOGY}, address = {1752 N ST NW, WASHINGTON, DC 20036-2904 USA}, abstract = {

Rheinheimera sp. strain A13L, which has antimicrobial activity, was isolated from alkaline brackish water of the high-altitude Pangong Lake of Ladakh, India. Here we report the draft genome sequence of Rhienheimera sp. strain A13L (4,523,491 bp with a G + C content of 46.23\%). The genome is predicted to contain genes for marinocine and colicin V production, which may be responsible for the antimicrobial activity of the strain.

}, issn = {0021-9193}, doi = {10.1128/JB.05636-11}, author = {Gupta, Hemant Kumar and Gupta, Rinkoo Devi and Singh, Ajit and Chauhan, Nar Singh and Sharma, Rakesh} } @article { ISI:000291568100065, title = {Glycerol mediated low temperature synthesis of nickel nanoparticles by solution reduction method}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {11}, number = {6}, year = {2011}, month = {JUN}, pages = {5131-5136}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {25650 NORTH LEWIS WAY, STEVENSON RANCH, CA 91381-1439 USA}, abstract = {

Phase pure Nickel nano-particles were synthesized by in-situ generation of nickel hydrazine hydrate complex (Ni-HH) followed by its decomposition in an alkaline glycerol medium. The synthesis can be performed in an open beaker with or without the use of surface protective reagents. By using the present method, Ni nano-particles can be prepared in large scale. The black nano-powders so-obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FTIR) spectroscopy and thermal analysis (TGA). XRD and SAED analysis revealed that the synthesized particles were pure crystalline nickel with FCC structure.

}, keywords = {Chemical Reduction, Nano-Particles, synthesis, Transition Metal, XRD}, issn = {1533-4880}, doi = {10.1166/jnn.2011.4142}, author = {Singh, Kalpana and Kate, Kunal H. and Chilukuri, V. V. Satayanarayana and Khanna, P. K.} } @article { ISI:000285387600001, title = {Greener ullmann-type coupling of aryl halides for preparing biaryls using reusable Pd/ZrO2 catalyst}, journal = {Synthetic Communications}, volume = {41}, number = {2}, year = {2011}, month = {JAN}, pages = {PII 931249796}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Biaryls with excellent yields can be prepared by the Ullmann-type coupling of aryl halides in the presence of potassium carbonate (as a base) and dimethylformamide (as a solvent), at 140 degrees C, using a reusable Pd (2.5wt\%)/ZrO2 catalyst. The product yield of 4-iodoanisole coupling is strongly influenced by the catalyst preparation method, solvent, and base.

}, keywords = {Aryl halides, Biaryls, Pd, Ullmann coupling reaction, ZrO2}, issn = {0039-7911}, doi = {10.1080/00397910903531805}, author = {Dumbre, Deepa K. and Wakharkar, Radhika D. and Choudhary, Vasant R.} } @article { ISI:000298910800008, title = {Growth of hydrothermally stable meso-porous silica structure interconnected around micro-porous zeolite crystals}, journal = {Materials Characterization}, volume = {62}, number = {12}, year = {2011}, month = {DEC}, pages = {1166-1172}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

The growth of hydrothermally stable ordered meso-porous silica with M41S type structure interconnected around zeolite crystals was achieved from seeds normally nucleating the crystallization of micro-porous zeolite. The solid state NMR and FT-IR showed species like Si(OSi)(3)OH and Si(OSi)(2)(OH)(2) (or Q(3) and Q(2) sites, respectively) are formed during first hydrothermal treatment with surfactant and NaOH. These species and surface silanol group of zeolite crystal condense to give meso-porous silica structure interconnected around zeolite crystal during re-crystallization at lower pH. Resulting meso-micro-porous hybrid material is found to be highly active, selective and stable in the synthesis of 2-(phenylamino) ethanol from aniline and ethylene carbonate compare to parent ZSM-5 and pure MCM-41. (C) 2011 Elsevier Inc. All rights reserved.

}, keywords = {Hydrothermal stability, Interconnected meso-porous silica, Meso-micro hybrid material, Synthesis of amino alcohol}, issn = {1044-5803}, doi = {10.1016/j.matchar.2011.09.002}, author = {Kinage, Anil K. and Prashar, Atul K. and Berlier, Gloria and Chaturvedi, Rajiv K.} } @article { ISI:000290167200026, title = {Improved performance of phosphonated carbon nanotube-polybenzimidazole composite membranes in proton exchange membrane fuel cells}, journal = {Journal of Materials Chemistry}, volume = {21}, number = {20}, year = {2011}, month = {APR}, pages = {7223-7231}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Development of thermally stable polymer electrolyte membranes with higher proton conductivity as well as mechanical stability is a key challenge in commercializing PEM fuel cells operating above 100 degrees C. Polybenzimidazole membranes are one of the promising candidates in this category although with limited mechanical stability and moderate proton conductivity. Here the incorporation of functionalized MWCNT is shown to increase both these key parameters of the polybenzimidazole membranes. Further, formation of a domain like structure after the incorporation of phosphonated MWCNTs (P-MWCNTs) in phosphoric acid doped polybenzimidazole membranes is demonstrated. The enhanced performance has been attributed to the formation of proton conducting networks that formed along the sidewalls of P-MWCNTs with a domain size of 17 nm as estimated from the small angle X-ray scattering measurements. Membrane electrode assembly (MEA) impedance measurements further reveal that the activation energy of oxygen reduction reaction (ORR) reduced for the composite membranes with enhanced proton conductivity. In addition, the mechanical strength measurements reveal a significant improvement in the yield strength and ultimate strength. Also, the mechanical strength of the composite membrane has been increased significantly as indicated by the improvement in the ultimate strength from 65 MPa to 100 MPa for the pristine and composite membranes, respectively. The optimum loading of P-MWCNTs is found to be 1\% as inferred from the polarization measurements carried out using pure hydrogen and oxygen. Thus, this study provides a unique opportunity to tune the properties of polymer electrolytes to prepare application oriented hybrid membranes using CNTs with tailor-made functional groups.

}, issn = {0959-9428}, doi = {10.1039/c0jm04265j}, author = {Kannan, Ramaiyan and Kagalwala, Husain N. and Chaudhari, Harshal D. and Kharul, Ulhas K. and Kurungot, Sreekumar and Pillai, Vijayamohanan K.} } @article { ISI:000284557000009, title = {Incorporation of zirconium in medium-pore aluminophosphate molecular sieves with AFO framework}, journal = {Microporous and Mesoporous Materials}, volume = {137}, number = {1-3}, year = {2011}, month = {JAN}, pages = {65-71}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Zirconium substituted medium pore microporous aluminophosphate molecular sieve ZrAPO-41 was prepared by hydrothermal synthesis under autogenous pressure The formation of the pure phase was confirmed by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM)The thermal behaviour of the material was investigated by carrying out thermogravimetric/differential thermal analysis (TGA/DTA) The zirconium environment was studied by magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy which suggests incorporation of zirconium into the framework UV-Visible diffuse reflectance study also supports the claim The temperature programmed desorption (TPD) of ammonia reveals that the acidity of ZrAPO 41 samples is higher than that of pure AlPO4-41 The catalytic activity of the samples was investigated through phenol hydroxylation reaction The result show hi E her catalytic activity for ZrAPO-41 samples compared to AlPO4-41 (C) 2010 Elsevier Inc All rights reserved

}, keywords = {AFO, Aluminophosphate, catalysis, Molecular sieve, ZrAPO 41}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2010.08.022}, author = {Chakrabortty, Dhruba and Ganguli, J. N. and Satyanarayana, C. V. V.} } @article { ISI:000293196800041, title = {Isobutrin from butea monosperma (flame of the forest): a promising new natural sensitizer belonging to chalcone class}, journal = {ACS Applied Materials \& Interfaces}, volume = {3}, number = {7}, year = {2011}, month = {JUL}, pages = {2440-2444}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In this work, {\textquoteleft}{\textquoteleft}isobutrin{\textquoteright}{\textquoteright}, an ecofriendly sensitizer that is extracted from Butea monosperma (commonly known as {\textquoteleft}{\textquoteleft}Flame of the Forest{\textquoteright}{\textquoteright}) flowers, is introduced. It is a bright yellow pigment belonging to the chalcone class and is examined as a sensitizer for optoelectronic applications. It is observed that chelation of this dye with Ti ions results into a strong dye-TiO(2) charge transfer (DTCT) band in the visible region. This Ti-Isobutrin chelate is stable, irreversible and its formation is studied using Benesi-Hildebrand plot. The locations of HOMO-LUMO states of the Ti-isobutrin chelate and the corresponding band alignment with TiO(2) are obtained. Also, a thermal stability test revealed that isobutrin is stable above 100 degrees C.

}, keywords = {Butea monosperma, chalcone, dye-sensitized solar cell, isobutrin, sensitizer, TiO(2)}, issn = {1944-8244}, doi = {10.1021/am200341y}, author = {Agarkar, Shruti A. and Kulkarni, Roshan R. and Dhas, Vivek V. and Chinchansure, Ashish A. and Hazra, Partha and Joshi, Swati P. and Ogale, Satishchandra B.} } @article { ISI:000293175800026, title = {Maghemite (hematite) core (shell) nanorods via thermolysis of a molecular solid of Fe-complex}, journal = {Dalton Transactions}, volume = {40}, number = {31}, year = {2011}, month = {2011}, pages = {8003-8011}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An Fe-metal complex with 2{\textquoteright}-hydroxy chalcone (2{\textquoteright}-HC) ligands [Fe(III) (2{\textquoteright}-hydroxy chalcone) 3] is synthesized by a chemical route and is subjected to different thermal treatments. Upon thermolysis in air at 450 degrees C for 3 h the complex yields maghemite (gamma-Fe(2)O(3)) nanorods with a thin hematite (alpha-Fe(2)O(3)) shell. X-Ray diffraction (XRD), Mossbauer spectroscopy, diffuse reflectance spectroscopy (UV-DRS), high resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy (FE-SEM) and vibrating sample magnetometry (VSM) are used to characterize the samples. The stability of the ligand and the Fe-complex is further examined by using thermogravimmetric/differential thermal analysis (TGA/DTA). We suggest a residual ligand controlled mechanism for the formation of an anisotropic nanostructure in a crumbling molecular solid undergoing ligand decomposition. Since the band gap of iron oxide is in the visible range, we explored the use of our core shell nano-rod sample for photocatalytic activity for H(2) generation by H(2)S splitting under solar light. We observed high photocatalytic activity for hydrogen generation (75 ml h(-1)).

}, issn = {1477-9226}, doi = {10.1039/c1dt10319a}, author = {Chaudhari, N. S. and Warule, S. S. and Muduli, Subas and Kale, B. B. and Jouen, Samuel and Lefez, Benoit and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000293168000044, title = {Novel hybrids of fluconazole and furanones: design, synthesis and antifungal activity}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {21}, number = {16}, year = {2011}, month = {AUG}, pages = {4873-4878}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

During our efforts to develop new antifungal agents, a number of hybrid molecules containing furanones and fluconazole pharmacophores were designed and synthesized. The new chemical entities thus synthesized were tested for their potential as antifungal agents against various fungal strains and it was observed that the compounds with general structure 7 were potent inhibitors of Candida albicans ATCC 24433, Candida glabrata ATCC 90030, Candida tropicalis ATCC 750 and Candida neoformans ATCC 34664 while the fluconazole analogues 12 exhibited antifungal activity against Candida albicans ATCC 24433 and Candida glabrata ATCC 90030. The structure-activity relationship for these compounds is discussed. The synthetic strategies used in the present work have potential to prepare a large number of compounds for further refinement of structures to obtain molecules suitable for development as antifungal drugs. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Antifungal activity, Fluconazole, Furanones}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2011.06.022}, author = {Borate, Hanumant B. and Sawargave, Sangmeshwer P. and Chavan, Subhash P. and Chandavarkar, Mohan A. and Iyer, Ramki and Tawte, Amit and Rao, Deepali and Deore, Jaydeep V. and Kudale, Ananada S. and Mahajan, Pankaj S. and Kangire, Gopinath S.} } @article {43203, title = {Novel pyrazole-3-carboxamide derivatives as cannabinoid-1 (CB1) antagonists: journey from non-polar to polar amides}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {21}, year = {2011}, month = {JAN}, pages = {562-568}, abstract = {The synthesis and biological evaluation of novel pyrazole-3-carboxamide derivatives as CB1 antagonists are described. As a part of eastern amide SAR, various chemically diverse motifs were introduced. In general, a range of modifications were well tolerated. Several molecules with high polar surface area were also indentified as potent CB1 receptor antagonists. The in vivo proof of principle for weight loss is exemplified with a lead compound from this series. (C) 2010 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.bmcl.2010.10.055}, author = {Sasmal, Pradip K. and Reddy, D. Srinivasa and Talwar, Rashmi and Venkatesham, B. and Balasubrahmanyam, D. and Kannan, M. and Srinivas, P. and Kumar, K. Shiva and Devi, B. Neelima and Jadhav, Vikram P. and Khan, Sanjoy K. and Mohan, Priya and Chaudhury, Hira and Bhuniya, Debnath and Iqbal, Javed and Chakrabarti, Ranjan} } @article { ISI:000298175400132, title = {Novel synthesis of nano-calcium carbonate (CaCO3)/polystyrene (PS) core-shell nanoparticles by atomized microemulsion technique and its effect on properties of polypropylene (PP) composites}, journal = {Polymers for Advanced Technologies}, volume = {22}, number = {12}, year = {2011}, month = {DEC}, pages = {2571-2582}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Calcium carbonate (CaCO3)/polystyrene (PS) nanoparticles (\< 100 nm) with core-shell structure were synthesized by atomized microemulsion technique. The polymer chains were anchored onto the surface of nano-CaCO3 through triethoxyvinyl silane (TEVS) as a coupling agent. Ammonium persulfate (APS), sodium dodecyl sulfate (SDS) and n-pentanol were used as initiator, surfactant, and cosurfactant, respectively. Polymerization mechanism of core-shell latex particles was discussed. Encapsulation of nano-CaCO3 by PS was confirmed by using transmission electron microscope (TEM). Grafting percentage of core-shell particles was investigated by Thermogravimetric Analyzer (TGA). Nano-CaCO3/PS core-shell particles were characterized by Fourier transform infrared (FTIR) spectrophotometer and differential scanning calorimeter (DSC). The results of FTIR revealed existence of a strong interaction at the interface of nano-CaCO3 particle and PS, which implies that the polymer chains were successfully grafted onto the surface of nano-CaCO3 particle through the link of the coupling agent. In addition, TGA and DSC results indicated an enhancement of thermal stability of core-shell materials compared with the pure nano-PS. Nano-CaCO3/PS particles were blended with polypropylene (PP) matrix on Brabender Plastograph by melt process with different wt\% of loading (i.e. 0.1-1 wt\%). The interfacial adhesion between nano-CaCO3 particles and PP matrix was significantly improved when the nano-CaCO3 particles were grafted with PS, which led to increased thermal, rheological, and mechanical properties of (nano-CaCO3/PS)/PP composites. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed a perfect dispersion of the nano-CaCO3 particles in PP matrix. Copyright (C) 2011 John Wiley \& Sons, Ltd.

}, keywords = {atomized microemulsion, core-shell nanoparticles, mechanical properties, polypropylene (PP), Rheological properties, Thermal properties}, issn = {1042-7147}, doi = {10.1002/pat.1802}, author = {Mishra, Satyendra and Chatterjee, Aniruddha and Singh, RajPal} } @article { ISI:000287273000004, title = {One-pot three-component kabachnik-fields synthesis of alpha-aminophosphonates using H-beta zeolite catalyst}, journal = {Tetrahedron Letters}, volume = {52}, number = {8}, year = {2011}, month = {FEB}, pages = {863-866}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

One-pot three-component Kabachnik-Fields synthesis of alpha-aminophosphonates with high yields from the reaction between carbonyl compound, primary amine, and substituted phosphite can be carried out in a short period, using H-beta zeolite as a reusable catalyst. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Carbonyl compound, H-beta zeolite, Primary amine, Substituted phosphite}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2010.11.105}, author = {Tillu, V. H. and Dumbre, Deepa K. and Wakharkar, R. D. and Choudhary, Vasant R.} } @article { ISI:000295552400021, title = {One-step synthesis of 4-alkyl-3-aryl-2,6-dicyanoanilines and their use in the synthesis of highly functionalized 2,3,5,6,7-and 2,3,4,5,7-substituted indoles}, journal = {Tetrahedron Letters}, volume = {52}, number = {42}, year = {2011}, month = {OCT}, pages = {5491-5493}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A three-component, one-step method for the synthesis of 4-alkyl-3-aryl-2,6-dicyanoanilines involving reaction of alkyl aldehyde, malononitrile and aryl aldehyde in presence of morpholine is reported. Highly functionalized 2,3,5,6,7- and 2,3,4,5,7-substituted indoles were prepared from these dicyanoanilines by reaction with ethyl bromoacetate. These substituted dicyanoanilines and indoles have a potential to be converted into various other compounds taking advantage of various functional groups present in these molecules. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {aldehydes, Dicyanoanilines, indoles, Malononitrile}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2011.08.064}, author = {Sawargave, Sangmeshwer P. and Kudale, Ananada S. and Deore, Jaydeep V. and Bhosale, Dattatry S. and Divse, Jaisingh M. and Chavan, Subhash P. and Borate, Hanumant B.} } @article { ISI:000286850000004, title = {Oxidative carbonylation of amine using water-soluble palladium catalysts in biphasic media}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {334}, number = {1-2}, year = {2011}, month = {JAN}, pages = {20-28}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Application of water-soluble palladium catalysts for oxidative carbonylation of aniline to N,N{\textquoteright} diphenyl urea (DPU) has been reported. The water-soluble palladium catalysts prepared from sulfonated N-containing ligands were found to be highly stable under reaction conditions and easily recyclable due to insoluble urea product in the reaction medium. This is in contrast to the sulfonated phosphine ligands, which are vulnerable to oxidation under reaction conditions, showing poor activity and stability. Commercially available as well as laboratory synthesized ligands were used for preparing water-soluble palladium catalysts, for oxidative carbonylation of aniline. The best activity was obtained for Pd complex with disodium 2,2{\textquoteright}-bipyridine-4,4{\textquoteright}-disulfonate (Bipy-DS) ligand. Under optimized conditions Pd(BipyDS)Pd(OAc)(2) catalyst gave TOF of similar to 210h(-1) with aniline conversion of similar to 97\% with similar to 91\% selectivity for N.N{\textquoteright}-diphenyl urea. It was found that the catalyst was easily reusable up to five times, with negligible loss in the catalytic activity. The effect of reaction parameters was investigated and a plausible reaction mechanism has been proposed. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Amine, Biphasic catalysis, Carbonylation, Urea, Water-soluble palladium catalyst}, issn = {1381-1169}, doi = {10.1016/j.molcata.2010.10.018}, author = {Didgikar, Mahesh R. and Joshi, Sunil S. and Gupte, Sunil P. and Diwakar, Makarand M. and Deshpande, Raj Madhukar and Chaudhari, Raghunath V.} } @article { ISI:000288179600007, title = {Photoelectrochemical applications of In2Se3 thin films by chemical deposition}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {22}, number = {4}, year = {2011}, month = {APR}, pages = {359-364}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Indium selenide films have been synthesized by chemical bath deposition method onto stainless steel plate. The configuration of fabricated cell is n-In2Se3| NaOH(1 M) + S(1 M) + Na2S(1 M) |C-(graphite). Characterization of the photoelectrochemical cell was carried out by studying X-ray diffraction, current-voltage and capacitance-voltage characteristics in the dark, barrier height measurements, power output, photoresponse and spectral response. The study shows that the In2Se3 thin films are n-type semiconductor. The junction ideality factor was found to be 3.24. The flat band potential and the barrier height were found to be 0.720 V and 0.196 eV, respectively. From the study of power output characteristics, open circuit voltage, short circuit current, fill factor and efficiency were found to be 310 mV, 20 mu A, 37.64 and 0.61\%, respectively. Photoresponse studies show that the lighted ideality factor is 2.78. Maximum current was observed at 575 nm.

}, issn = {0957-4522}, doi = {10.1007/s10854-010-0142-7}, author = {Hankare, P. P. and Rathod, K. C. and Asabe, M. R. and Jadhav, A. V. and Helavi, V. B. and Chavan, Santosh S. and Garadkar, K. M. and Mulla, Imtiaz S.} } @article { ISI:000287996100027, title = {Selective catalytic oxidation of geraniol to citral with molecular oxygen in supercritical carbon dioxide}, journal = {Applied Catalysis A-General}, volume = {394}, number = {1-2}, year = {2011}, month = {FEB}, pages = {209-214}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Selective catalytic oxidation of geraniol to citral with molecular oxygen in supercritical carbon dioxide (scCO(2)) has been investigated. The catalyst used was a chromium containing mesoporous molecular sieve catalyst viz. CrMCM-41. Comparison studies were performed with CoMCM-41. PtMCM-41 and PdMCM-41 catalysts. Among the various catalysts studied. CrMCM-41 showed a high conversion of geraniol and an excellent selectivity for citral. In contrast CoMCM-41, PtMCM-41 and PdMCM-41 catalysts exhibited low conversion of geraniol. However all three catalysts compared showed similar citral selectivity to CrMCM-41. The effect of CO(2) pressure and reaction temperature geraniol oxidation was studied with CrMCM-41. Supercritical CO(2) medium was found to enhance the conversion of geraniol and/or yield of citral. It was noticed that the catalyst can be recycled with negligible loss of conversion. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Citral, Geraniol, heterogeneous catalyst, Molecular oxygen, Selective oxidation, Supercritical carbon dioxide}, issn = {0926-860X}, doi = {10.1016/j.apcata.2011.01.001}, author = {Dapurkar, Sudhir E. and Kawanami, Hajime and Chatterjee, Maya and Rode, Chandrasekhar V. and Yokoyama, Toshirou and Ikushima, Yutaka} } @article { ISI:000287627200012, title = {Single nucleotide polymorphism in transcobalamin II (15V) induces structural changes in the protein as revealed by molecular modeling studies}, journal = {Biochemistry}, volume = {50}, number = {8}, year = {2011}, month = {MAR}, pages = {1396-1402}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Cobalamin is an essential micronutrient in mammals. Deficiencies of this micronutrient have been implicated as risk factors for various complex diseases. Cobalamin is transported to the cells by the transport protein transcobalamin II (TCII), and hence genetic variations (like single nucleotide polymorphisms) in TCII could be perceived to affect the binding of cobalamin to TCII, thereby modulating the intracellular concentrations of cobalamin. To understand whether three nonsynonymous mutations in TCII (I5V, P241R, and R381Q) alter the structure of the protein which could potentially affect cobalamin binding, we performed molecular dynamics simulation in silico. Superimposition of active sites of the four simulated models (wild type and three variants) with the human TCII crystal structure revealed that the distance between the N epsilon nitrogen atom of His-173 and the cobalt ion of cobalamin deviated considerably in the I5V model as compared to wild type and other variants. His-173 directly coordinates with the cobalt ion of cobalamin. Further, from our dynamic cross-correlation and principal component analysis it appears that in the I5V model the beta-domain moves apart from the alpha-domain creating a wide gap between the two domains. This might facilitate the initial binding of cobalamin in the I5V model as cobalamin enters the binding site through the gap between the two domains. These observations were not found in the other variants. We thus speculate that binding of cobalamin will be more facile in the I5V variant.

}, issn = {0006-2960}, doi = {10.1021/bi101095g}, author = {Silla, Yumnam and Chandamouli, Balasubramanian and Maiti, Souvik and Sengupta, Shantanu} } @article {42542, title = {Solvent-dependent aggregation behavior of a new Ru(ii)-polypyridyl based metallosurfactant}, journal = {Chemical Communications}, volume = {47}, year = {2011}, month = {SEP}, pages = {11074-11076}, abstract = {

Variation of the solvent polarity leads to the formation of vesicles and reverse vesicles of a newly synthesized amphiphilic Ru(II)-polypyridyl complex.

}, doi = {10.1039/C1CC13957F}, author = {Mahato, Prasenjit and Saha, Sukdeb and Choudhury, Sipra and Das, Amitava} } @article { ISI:000295757900019, title = {Solvent-free selective oxidation of primary alcohols-to-aldehydes and aldehydes-to-carboxylic acids by molecular oxygen over MgO-supported nano-gold catalyst}, journal = {Catalysis Communications}, volume = {13}, number = {1}, year = {2011}, month = {OCT}, pages = {82-86}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Magnesium oxide supported nano-gold catalyst (prepared by the homogeneous deposition precipitation technique) showed high activity/selectivity and excellent reusability in the oxidation of different primary alcohols and aldehydes to corresponding aldehydes and carboxylic acids, respectively, by molecular oxygen (under atmospheric pressure) in the absence of any solvent. Influence of the catalyst calcination temperature (400-900 degrees C), reaction temperature (50-120 degrees C) and use of different solvents (viz. toluene. p-xylene, DMF or DMSO) on the oxidation reaction has also been studied. (C) 2011 Published by Elsevier B.V.

}, keywords = {Alcohols, aldehydes, Au/MgO, Molecular oxygen, Solvent-free oxidation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2011.07.001}, author = {Choudhary, Vasant R. and Dumbre, Deepa K.} } @article { ISI:000296306600025, title = {Strong electric field modulation of transport in PVDF/MWCNT nanocomposite near the percolation threshold}, journal = {Solid State Communications}, volume = {151}, number = {21}, year = {2011}, month = {NOV}, pages = {1612-1615}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A nanocomposite comprising of multiwalled carbon nanotubes (MWCNT) embedded in ferroelectric Poly(vinylidene fluoride) PVDF polymer matrix is examined for electric field induced transport modulation. The pulsed laser deposition (PLD) grown thin films of the nanocomposite with different MWCNT content were characterized. When used as a channel layer in a field effect transistor configuration, a strong electric field modulation of the transport was realized just below the percolation threshold. We believe that this nanocomposite non-percolating channel concept can provide several opportunities for FET devices for organic electronics. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Field effect device, pulsed laser deposition, PVDF, Scanning tunneling microscopy}, issn = {0038-1098}, doi = {10.1016/j.ssc.2011.07.018}, author = {Chanmal, Chetan and Deo, Meenal S. and Rana, Abhimanyu and Jog, Jyoti Prakash and Ogale, Satishchandra B.} } @article { ISI:000291294100029, title = {Structural isomerism and effect of fluorination on gas adsorption in copper-tetrazolate based metal organic frameworks}, journal = {Chemistry of Materials}, volume = {23}, number = {11}, year = {2011}, month = {JUN}, pages = {2908-2916}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Synthesis, structure, and gas adsorption properties of three Metal Organic Frameworks (MOFs) synthesized from predesigned ligands 4-(1H-tetrazole-5-yl)benzoic acid (4-TBA) and 2-fluoro-4-(1H-tetrazole-5-yl)benzoic acid (2F-4-TBA) along with Cu(II) as an metal precursor has been reported. Among these MOFs, Cu-9(4-TBA)(10)(C2H5OH)(2) (Cu-TBA-1) and Cu-2(4-TBA)(2)(DMF)(C2H5OH) (Cu-TBA-2) are structural isomers. Whereas, Cu-2(4-TBA)(2)(DMF)(C2H5OH) (Cu-TBA-2) and Cu-2(2-F-4-TBA)(2)(DMF)(2) (Cu-TBA-2F) have similar crystal structure. N-2 adsorption isotherms of the activated sample of Cu-TBA-1 and -2 exhibit types-I sorption behavior with a Langmuir and Brunauer-Emmett-Teller (BET) surface area of 686, 402 m(2)/g and 616, 356 m(2)/g, respectively. It is noteworthy that Cu-TBA-1 and -2 adsorbs 1.16 and, 1.54 wt \% H-2, while Cu-TBA-2F adsorbs 0.67 wt \% at 77 K and 1 atm. On the other hand, Cu-TBA-1 and -2 adsorb 3.08 and 2.54 mmol/g, while Cu-TBA-2F adsorbs 1.27 mmol/g of CO2 at 298 K and 1 bar pressure. H-2 adsorption sites in Cu-TBA-2 and -2F have been analyzed by molecular simulation.

}, keywords = {CO2 adsorption, fluorination, Hydrogen storage, Metal-organic framework, structural isomerism}, issn = {0897-4756}, doi = {10.1021/cm2004352}, author = {Pachfule, Pradip and Chen, Yifei and Sahoo, Subash Chandra and Jiang, Jianwen and Banerjee, Rahul} } @article { ISI:000288835000010, title = {Structure-property of thermoplastic polyurethane-clay nanocomposite based on covalent and dual-modified laponite}, journal = {Journal of Computational and Theoretical Nanoscience}, volume = {4}, number = {1}, year = {2011}, month = {JAN}, pages = {65-73}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Modification of surface of clay platelets by ionic and covalent modification techniques renders it to be easily dispersed in polymers like, Thermoplastic Polyurethane (TPU). Only ionic or covalent modification techniques in isolation are not sufficient to achieve uniform nanoscale dispersion of Laponite (synthetic hectorite nanoclay) in TPU. Hence, the dual modification of Laponite (both ionic and covalent) is performed and the effects of the modification on the morphology, thermal and rheological behaviors of the TPU-modified clay nanocomposites have been studied. The degree of exfoliation of clay platelet in TPU matrix is found to be higher for dual functionalized nanoclays compared to their singly modified counterparts. Interestingly, dual modified Laponite clays prepared by using two different techniques (ionic followed by covalent and covalent followed by ionic) exhibit different morphology and properties. The dual modified clays significantly alter the equilibrium morphology of TPU. The storage modulus of the dual modified Laponite-TPU nanocomposite in the glassy region (at -60 degrees C) land in the rubbery region (+98 degrees C) is improved by 172.8\% and 85\%, respectively as compared to the neat TPU. Similarly, the onset of degradation is found to be enhanced by 28.7 degrees C as compared to the neat TPU.

}, keywords = {Dual modification, Laponite Nanocomposite, Morphology, Structure-Property, Thermoplastic polyurethane}, issn = {1936-6612}, doi = {10.1166/asl.2011.1174}, author = {Mishra, Ananta K. and Rajamohanan, P. R. and Nando, Golok B. and Chattopadhyay, Santanu} } @article { ISI:000294982800015, title = {Surfactant tunable hierarchical nanostructures of CdIn2S4 and their photohydrogen production under solar light}, journal = {International Journal of Hydrogen Energy}, volume = {36}, number = {18}, year = {2011}, month = {SEP}, pages = {11628-11639}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The hierarchical nanostructures of CdIn2S4 were selectively prepared through hydrothermal process in the presence of different surfactants. Structural study demonstrated existence of cubic spinel structure and micro structural study shown a pretty marigold flower like morphology without any surfactant. The effect of surfactants on the morphology and microstructure of CdIn2S4 has been studied by using Polyvinyl pyrrolidone (PVP) and Cetyltrimethyl ammonium bromide (CTAB) as a surfactants. The CdIn2S4 bipyramids with length of 0.7-1 mu m have been obtained using PVP. Interestingly, the nanopetals (thin and transparent) of CdIn2S4 are self assembled into hollow spheres in the presence of CTAB. Considering the importance of these unique nanostructures, the growth mechanism has also been proposed. The optical properties demonstrated the band gap in the range of 2.12-2.29 eV which is well within the visible region. In this contest, photocatalytic activity for hydrogen production using the above nanostructures under visible light was also demonstrated. The prima-fascia observations shows that the bipyramidal CdIn2S4 exhibit excellent photocatalytic activity for hydrogen production (3238 mu molh(-1)) than other nanostructures. Being a nanostructured semiconductor chalcogenide with a good stability will also have potential applications in solar cells and LED. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Bipyramids, CdIn2S4, Hydrogen generation, hydrothermal, Self-assembled}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2011.06.061}, author = {Bhirud, Ashwini P. and Chaudhari, Nilima and Nikam, Latesh and Sonawane, Ravindra and Patil, Kashinath and Baeg, Jin-Ook and Kale, Bharat} } @article { ISI:000287058100062, title = {Synthesis and characterization of chemically deposited nickel substituted CdSe thin film}, journal = {Journal of Alloys and Compounds}, volume = {509}, number = {6}, year = {2011}, month = {FEB}, pages = {2948-2951}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The technologically important Cd(0.5)Ni(0.5)Se thin film has been developed by solution growth technique on non-conducting glass substrate in tartarate bath containing Cd(+2), Ni(+2) ions and sodium selenosulphate in an aqueous alkaline medium at room temperature. Various preparative conditions of the thin films are outlined. The films were characterized by X-ray diffraction, scanning electron microscope, optical absorption and electrical measurements. The X-ray diffraction study indicates that the film is polycrystalline in nature with hexagonal phase. Scanning electron micrograph shows that the film is homogeneous with well-defined grains. The films have high optical absorption coefficient. Thermoelectric power measurement shows p-type conduction mechanism. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {Chemical synthesis, Crystal growth, Electrical conductivity, thin film}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2010.11.165}, author = {Hankare, P. P. and Jadhav, B. V. and Chate, P. A. and Sathe, D. J. and Mulla, Imtiaz S.} } @article {42786, title = {Synthesis and characterization of cholesteric thermotropic liquid crystalline polyesters based on isosorbide}, journal = {Materials Sciences and Applications}, volume = {2}, year = {2011}, month = {OCT}, pages = {1520-1527}, abstract = {

Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral dia-cid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain pack-ing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. Results: Optical microscopy study reveals that more than 50\% of isosorbide content with phenyl hydroquinone and terephthalic acid showed {\textquotedblleft}yellow iridescent oily streaks{\textquotedblright} with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stabil-ity of all copolyesters was more than 300oC on the basis of 10 wt\% loss. Conclusions: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300oC. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP

}, keywords = {Cholesteric, Crystallinity, differential scanning calorimetry, Inherent Viscosity, Liquid Crystalline Polymers, Optical Microscopy, Solubility and Solution Polycondensation, Thermo Gravimetric Analysis, thermotropic, Wide Angle X-Ray Diffraction}, doi = {10.4236/msa.2011.210205}, author = {Chavan, Nayaku} } @article { ISI:000287163600004, title = {Synthesis and drug-delivery behavior of chitosan-functionalized graphene oxide hybrid nanosheets}, journal = {Macromolecular Materials and Engineering}, volume = {296}, number = {2}, year = {2011}, month = {FEB}, pages = {131-140}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Chitosan-functionalized graphene oxides (FGOCs) were successfully synthesized. FGOCs were found to significantly improve the solubility of the GO in aqueous acidic media. The presence of organic groups was confirmed by means of XPS and TGA. Restoration of the sp(2) carbon network and exfoliation of graphene sheets were confirmed by Raman spectroscopy, UV-visible spectroscopy and WAXD. The SEM and AFM investigations of the resultant FGOCs showed that most of the graphene sheets were individual and few were layered. Controlled release behavior of Ibuprofen and 5-fluorouracil was then investigated. We found that FGOCs are a promising new material for biological and medical applications.

}, keywords = {Biocompatibility, Chitosan, drug delivery systems, functionalization of polymers, solution properties}, issn = {1438-7492}, doi = {10.1002/mame.201000307}, author = {Rana, Vijay Kumar and Choi, Myeon-Cheon and Kong, Jin-Yeon and Kim, Gwang Yeon and Kim, Mi Ju and Kim, Sun-Hee and Mishra, Satyendra and Singh, Raj Pal and Ha, Chang-Sik} } @article { ISI:000288218300045, title = {Synthesis of single crystalline CdS nanocombs and their application in photo-sensitive field emission switches}, journal = {Nanoscale}, volume = {3}, number = {3}, year = {2011}, month = {JAN}, pages = {1078-1083}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Single crystalline CdS nanocombs were synthesized by a thermal evaporation route. The photo-sensitive field emission current shows a reproducible switching behavior, with a rise in current level of nearly five times the initial preset value of similar to 1 mu A. An ultra low turn-on field, required to draw an emission current density of similar to 0.1 mu A cm(-2) (100 nA), is found to be similar to 0.26 V mu m(-1) (260 V), which is much lower than the reported values for various other CdS nanostructures. Upon illumination with visible light the CdS nanocombs act as a photo field emission switch. At an applied field of similar to 0.65 V mu m(-1) the current densities are observed to be similar to 14.6 mu A cm(-2) and similar to 26.9 mu A cm(-2), without and with light illumination, respectively. The average emission current is seen to be stable over the duration of measurement for two preset values. The high sensitivity and fast response in the visible range indicates that the CdS nanocombs can be used as a photo-sensitive field emitting switch in device applications, and also in pulsed electron beam technology.

}, issn = {2040-3364}, doi = {10.1039/c0nr00659a}, author = {Chavan, Padmakar G. and Badadhe, Satish S. and Mulla, Imtiaz S. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000293491600016, title = {Thermally decomposed Ni-Fe-hydrotalcite: a highly active catalyst for the solvent-free N-acylation of different amines by acid chlorides}, journal = {Catalysis Communications}, volume = {12}, number = {14}, year = {2011}, month = {AUG}, pages = {1351-1356}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A composite Ni-Fe catalyst obtained from the thermal decomposition of Ni-Fe-hydrotalcite at 600 degrees C shows very high activity in the solvent-free N-acylation of amines by different acid chlorides with high product yields under very mild reaction conditions (viz, room temperature, short reaction period and small amount of catalyst). The catalyst also shows excellent reusability in the reaction. The crystalline phases present in the catalyst are mixed oxides and hydroxides of nickel and iron. The high catalytic activity of the decomposed Ni-Fe-hydrotalcite is attributed to the formation of uniformly distributed Ni-Fe metal oxides and hydroxides. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Acid chlorides, amines, Decomposition of Ni-Fe-hydrotalcite, N-acylation of amines, Ni-Fe-hydrotalcite derived catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2011.05.015}, author = {Choudhary, Vasant R. and Dumbre, Deepa K.} } @conference {42783, title = {Transfer of technology (ToT) document of ethyl silicate-32}, booktitle = {Transfer of Technology (ToT)/ Technical Documents}, year = {2011}, month = {JAN}, address = {DRDL Hyderabad.}, author = {Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Dwivedi, Mayank and Chavan, Nayaku and Qureshi, Moham and Bhongale, Sunil Sitaram and Rao, Locanindi Hari Sarvothama and Dhanasekharan, Janakiraman and Mohan, S. Krishna and Deokar, Sarika Babasaheb and Momin, Mohasin Shamshuddin} } @conference {42789, title = {Transfer of technology (ToT) document of phenol-aniline-formaldehyde (sf-342a) resins}, booktitle = {Transfer of technology (ToT) document}, year = {2011}, month = {JAN}, address = {DRDL Hyderabad.}, author = {Ponrathnam, Surendra and Chelanattukizhakkemadath, Raman Rajan and Dwivedi, Mayank and Chavan, Nayaku and Qureshi, Moham and Bhongale, Sunil Sitaram and Rao, Locanindi Hari Sarvothama and Dhanasekharan, Janakiraman and Mohan, S. Krishna and Deokar, Sarika Babasaheb and Momin, Mohasin Shamshuddin} } @article { ISI:000307209400005, title = {Alkylation of benzene to cumene over mor zeolite catalysts}, journal = {Revue Roumaine De Chimie}, volume = {57}, number = {2}, year = {2012}, month = {FEB}, pages = {107-113}, publisher = {EDITURA ACAD ROMANE}, address = {CALEA 13 SEPTEMBRIE NR 13, SECTOR 5, BUCURESTI 050711, ROMANIA}, abstract = {

The vapor phase alkylation of benzene to cumene (isopropyl benzene) is studied over MOR (mordenite) type zeolite at different process parameters. The reaction was also studied by adopting different methodologies (pyridine poisoning, passing of moist propylene, alkali dominant mordenite, use of coked catalyst and metal impregnated zeolite) to check the nature of product distribution and the extent of activity and selectivity to alkylated product IPB, DIPB (isopropyl benzene and diisopropyl benzene) and n-PB (n-propyl benzene). It is revealed that the adoption of different methodologies affects the activity and selectivity significantly by suppressing of alkylation / isomerisation reactions.

}, keywords = {Alkylation, cumene, isopropanol, MOR zeolite, propylene}, issn = {0035-3930}, author = {Vyawahare, Yogesh K. and Chumbhale, Vilas R. and Aswar, Anand S.} } @article { ISI:000308957700010, title = {Alpha-geminal dihydroxymethyl piperidine and pyrrolidine iminosugars: synthesis, conformational analysis, glycosidase inhibitory activity, and molecular docking studies}, journal = {Journal of Organic Chemistry}, volume = {77}, number = {18}, year = {2012}, month = {SEP}, pages = {7873-7882}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The Jocic-Reeve and Corey-Link type reaction of dichloromethyllithium with suitably protected 5-keto-hexofuranoses followed by treatment with sodium azide and sodium borohydride reduction gave 5-azido-5-hydroxylmethyl substituted hexofuranoses 7a-c with required geminal dihydroxymethyl group. Removal of protecting groups and converting the C-1 anomeric carbon into free hemiacetal followed by intramolecular reductive aminocyclization with in situ generated C5-amino functionality afforded corresponding 5C-dihydroxymethyl piperidine iminosugars 2a-c. Alternatively, removal of protecting groups in 7b and 7c and chopping of C1-anomeric carbon gave C2-aldehyde that on intramolecular reductive aminocyclization with CS-amino gave 4C-dihydroxyrnethyl pyrrolidine iminosugars 1b and 1c, respectively. On the basis of the H-1 NMR studies, the conformations of 2a/2b were assigned as C-4(1) and that of 2c as C-1(4). The glycosidase inhibitory activities of all five iminosugars were studied with various glycosidase enzymes and compared with natural o-g/uco-l-deoxynojirimycin (DNJ). All the five compounds were found to be potent inhibitors of rice alpha-glucosidase with K-i and IC50 values in the nanomolar concentration range. Iminosugars 2b and 1b were found to be more potent inhibitors than their parent iminosugar. These results were substantiated by in silico molecular docking studies.

}, issn = {0022-3263}, doi = {10.1021/jo3009534}, author = {Pawar, Nitin J. and Parihar, Vijay Singh and Chavan, Sanjay T. and Joshi, Rakesh S. and Joshi, Pranaya V. and Sabharwal, Sushma G. and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article {42779, title = {Amino functionalized oligo polyimides with enhanced storage stability}, number = {EP 11817412 A 20111228}, year = {2012}, month = {JUL}, abstract = {

The invention relates to an improved process for the preparation of amino functionalized oligomeric monomeric reactant type polyimides having higher stability. More particularly it relates to a process for the preparation of soluble imide prepolymers, used as matrix resins that can be rapidly cured with multi-functional moieties such as diepoxy, dicarboxyl, anhydride, diisocyanates to form crosslinked structures having enhanced thermal stability and mechanical strength.

}, author = {Dwivedi, Mayank and Rao, Locanindi Hari Sarvothama and Mohan, Srinivasulu Reddy Krishna and Dhanasekharan, Janakiraman and Rao, Bevara Madhusudana and Kumar, Sriperambudur Rajesh and Ponrathnam, Surendra and Rajan, Chelanattukizhakkemadath Raman and Tayal, Rajiv Kumar and Shadbar, Qureshi Mohammed and Chavan, Nayaku and Deokar, Sarika Babasaheb and Mulani, Khudbudin Baban and Ghorpade, Ravindra V. and Bhongale, Sunil Sitaram and Nalawade, Archana Chetan and Sontakke, Kalpana Vishwanathrao and Bhosle, Sonali Madhavrao and Mule, Smita Atmaram and Dhoble, Deepa Arun and John, Aruldoss and Shaikh, Wasif Abdul Lateef and Harikrishna, Reghunathan and Punitharasu, Vellimala and Momin, Mohasin Shamshuddin} } @article { ISI:000302437100008, title = {Analysis of AGE modified proteins and RAGE expression in HER2/neu negative invasive ductal carcinoma}, journal = {Biochemical and Biophysical Research Communications}, volume = {419}, number = {3}, year = {2012}, month = {MAR}, pages = {490-494}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Cancer is associated with increased glycolysis and carbonyl stress. In view of this, AGE modified proteins were identified from clinical breast cancer tissue using 2DE-immunoblot and mass-spectrometry. These proteins were identified to be serotransferrin, fibrinogen gamma chain, glycerol-3-phosphate dehydrogenase, lactate dehydrogenase, annexin II, prohibitin and peroxiredoxin 6, which have established role in cancer. Further, RAGE expression and its downstream signaling proteins NADPH oxidase and NF-kB were studied. Role of these AGE modified proteins and RAGE signaling in breast cancer is discussed. (C) 2012 Elsevier Inc. All rights reserved.

}, keywords = {advanced glycation end products, Breast cancer, RAGE}, issn = {0006-291X}, doi = {10.1016/j.bbrc.2012.02.039}, author = {Korwar, Arvind M. and Bhonsle, Hemangi S. and Chougale, Ashok D. and Kote, Sachin S. and Gawai, Kachru R. and Ghole, Vikram S. and Koppikar, Chaitanyananda B. and Kulkarni, Mahesh J.} } @article { ISI:000311350000022, title = {Anchored Pd-complexes in mesoporous supports: synthesis, characterization and catalysis studies for carbonylation reactions}, journal = {Catalysis Today}, volume = {198}, number = {1, SI}, year = {2012}, month = {DEC}, pages = {154-173}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Pd(pyca)(PPh3)(OTs) [pyca = 2-picolinate] complex is efficiently anchored inside different mesoporous matrices, such as MCM-41, MCM-48, SBA-15 using a molecular aminopropyl tether moiety employing different synthesis strategies. Thorough characterization of the materials using powder XRD, multinuclear (C-13, Si-29, P-31) CP-MAS NMR, XPS, SEM, N-2-sorption studies etc. confirmed the successful anchoring of the palladium complex to the walls of the support matrices thus establishing the synthesis protocols unambiguously. The catalysts were found to be highly active and selective for the carbonylation of different aryl olefins and alcohols. Consecutive recycling and successful reuse proved the stability and true heterogeneous nature of all the anchored catalysts, which is a substantial advancement over the existing heterogeneous catalysts for carbonylation. (C) 2012 Elsevier B. V. All rights reserved.

}, keywords = {Anchored catalysts, Carbonylation, Immobilization, mesoporous materials, Palladium complex}, issn = {0920-5861}, doi = {10.1016/j.cattod.2012.04.047}, author = {Sarkar, Bibhas R. and Chaudhari, Raghunath V.} } @article { ISI:000309850200004, title = {Asymmetric synthesis of a 12-membered macrolactone core and a 6-epi analogue of amphidinolide W from 4-pentenoic acid}, journal = {Tetrahedron-Asymmetry}, volume = {23}, number = {15-16}, year = {2012}, month = {AUG}, pages = {1170-1185}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A flexible and efficient asymmetric route to the synthesis of a 12-membered macrolactone core and a 6-epi analogue of amphidinolide W has been accomplished from commercially available 4-pentenoic acid. The successful generation of stereocenters was achieved by utilizing an Evans{\textquoteright} chiral auxiliary-based alkylation and aldol reaction. Other key reactions such as a Julia-Kocienski olefination, Kita{\textquoteright}s macrolactonization, ring closing metathesis (RCM) reaction, and Yamaguchi{\textquoteright}s esterification were significant for the construction of the macrolactone cores. (c) 2012 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2012.07.006}, author = {Chatterjee, Bhaskar and Mondal, Dhananjoy and Bera, Smritilekha} } @article { ISI:000312149600044, title = {Base promoted highly efficient copper fluorapatite catalyzed coupling of phenols with arylboronic acids under mild and ligand-free conditions}, journal = {RSC Advances}, volume = {2}, number = {33}, year = {2012}, month = {OCT}, pages = {12818-12823}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A mild, general and highly efficient protocol has been developed for the synthesis of diaryl ethers in good to excellent yield under mild and ligand-free conditions. This is the first example in which a recyclable, heterogeneous copper fluorapatite catalyst is used for the arylation of phenols with arylboronic acids at room temperature in the presence of Cs2CO3 as a base and methanol as a solvent. The catalyst was recovered and reused several times without loss of catalytic activity.

}, issn = {2046-2069}, doi = {10.1039/c2ra21850j}, author = {Mulla, Shafeek Abdul Rashid and Inamdar, Suleman M. and Pathan, Mohsinkhan Y. and Chavan, Santosh S.} } @article { ISI:000309370500004, title = {Carbon dioxide capture by metal organic frameworks}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {51}, number = {9-10, SI}, year = {2012}, month = {SEP}, pages = {1223-1230}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

The design and synthesis of functionalized metal organic framework materials (MOFs) for reversible physisorption of CO2 is discussed. This strategy of CO2 adsorption in MOFs requires less energy for regeneration than materials relying on chemisorption. As a result the MOFs have received considerable attention as sorbent materials for strategic gases such as CO2 and H,. In this review, we have discussed different MOFs and hybrid materials containing MOFs which can adsorb CO2 at room temperature. In order to achieve high adsorption capacity, fast CO2 adsorption-desorption and low energy requirement for regeneration are necessary. Several avenues for increasing the CO2 adsorption capacity of such materials, for instance, introduction of open metal sites and the use of ligand molecules with specific functionalities (like -OH or -NH2) have been described. It has been observed that CO2 loading capacity of MOFs increases with functionalization. Herein, we have discussed how N-containing and fluorinated MOFs are designed to achieve higher CO2 loading than their non-functionalized counterparts. Nanocarbons (e.g. carbon nanotubes, carbon nanofibres, etc.) are porous materials and a blend of these porous materials with porous MOFs or porous carbon derived from MOFs may act as a better adsorbate than even the pure materials. Enhancement of CO2 loading by nanocarbon-MOF hybrid material is also discussed.

}, keywords = {Carbon dioxide adsorbents, Carbon dioxide capture, hybrid materials, Metal organic frameworks, Nanocarbons, Porous nanocarbons}, issn = {0376-4710}, author = {Saha, Subhadeep and Chandra, Suman and Garai, Bikash and Banerjee, Rahul} } @article { ISI:000309370500015, title = {Carbon dioxide reforming of methane over ruthenium substituted strontium titanate perovskite catalysts}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {51}, number = {9-10, SI}, year = {2012}, month = {SEP}, pages = {1339-1347}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

Strontium titanate (SrTiO3) doped with varying amounts of ruthenium (7.9, 15.6 and 31 wt\%) have been prepared by the citrate gel synthesis method. Structural and textural characterizations reveal that at lower concentrations, a major part of Ru is incorporated in the lattice of SiTiO3. The content of surface Ru (outside lattice) increases with increasing amounts of the doped Ru. The surface Ru reduced at lower temperatures compared to Ru incorporated into the lattice. The reduction of the lattice substituted Ru occurs only at temperatures above the collapse of the perovskite structure. The catalyst sample with 7.9 wt\% of Ru shows good conversions in the dry reforming of methane with CO2. The conversion of CO2 is in excess compared to methane under the studied reaction conditions. As a result, H-2/CO ratio of the product gases which should have been equivalent to unity is lower than the stoichiometric value. This ratio is particularly low when lower reaction temperatures (873-973 K) were used. Similar was the case when high space velocities were used. Low methane conversion and reverse water gas shift reaction are the causes for the low H-2/CO ratios.

}, keywords = {Carbon dioxide reforming, Catalysts, Citrate gel method, Doped catalysts, Dry reforming, Methane reforming, Perovskites, Reverse water gas shift, Ruthenium doped catalysts, Strontium titanate, Syngas}, issn = {0376-4710}, author = {Gurav, Hanmant R. and Bobade, Richa and Das, Vineetha Lakshmi and Chilukuri, Satyanarayana V.} } @article { ISI:000312061000043, title = {Ce-Ni mixed oxide as efficient catalyst for H-2 production and nanofibrous carbon material from ethanol in the presence of water}, journal = {RSC Advances}, volume = {2}, number = {25}, year = {2012}, month = {AUG}, pages = {9626-9634}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hydrogen production from ethanol steam reforming (H2O/C2H5OH = 3) was studied over Ce-Ni based catalysts issued from different preparation methods (co-precipitation (CP), impregnation (IMP) and incipient wetness impregnation (IWI)). Catalysts prepared by the CP method exhibit higher activity and much better stability compared to the other two types of catalysts. The Ni1CeOY-CP catalyst is able to completely convert ethanol at 450 degrees C to H-2, CO2 and CH4 (almost no CO is observed), with a H-2 yield of 3 moles of hydrogen produced per mole of ethanol converted. A very high H-2 yield of 4.6 mol mol(EtOH)(-1) is achieved over the Ni1CeOY-CP mixed oxide at 650 degrees C. Correlations between the preparation method, catalytic activity and stability, and type of carbon deposition are discussed. The CP method forms very active small sized NiO (15 nm) and CeO2 (4 nm) nanoparticles, leading to the formation of a lower amount of carbon deposition in the form of nanofibrous carbon materials, the size of which depends on the Ni related nanoparticles. For CP catalysts, the graphitic filaments obtained correspond to carbon nanofibers (CNFs) and carbon nanotubes (CNTs) with a much smaller and homogenous size compared to the filamentous carbon formed over the catalysts issued from the other preparation methods, in relation to the active particles size. The catalytic stability is attributed to the type of carbon formed.

}, issn = {2046-2069}, doi = {10.1039/c2ra21701e}, author = {Fang, Wenhao and Pirez, Cyril and Capron, Mickael and Paul, Sebastien and Raja, Thirumalaiswamy and Dhepe, Paresh Laxmikant and Dumeignil, Franck and Jalowiecki-Duhamel, Louise} } @article { ISI:000296558300011, title = {Chemical deposition of CuInSe2 thin films by photoelectrochemical applications}, journal = {Journal of Alloys and Compounds}, volume = {511}, number = {1}, year = {2012}, month = {JAN}, pages = {50-53}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Copper indium diselenide films have been synthesized by chemical bath deposition method. The configuration of fabricated cell is n-CuInSe2|NaOH (1 M) + S (1 M) + Na2S (1 M)|C-(graphite). The photoelectrochemical cell characterization of the films is carried out by studying current-voltage characteristics in dark, capacitance-voltage in dark, barrier height measurements, power output, photoresponse and spectral response. The study shows that CuInSe2 thin films are n-type conductivity. The junction ideality factor is found to be 3.81. The flat band potential is found to be 0.763 V. The barrier height value is found to be 0.232 eV. The study of power output characteristic shows open circuit voltage, short circuit current, fill factor and efficiency are found to be 310 mV, 20 mu A, 42.12\% and 0.82\%, respectively. Photoresponse shows lighted ideality factor which is 2.92. Spectral response shows the maximum current observed at 650 nm. (C) 2011 Published by Elsevier B.V.

}, keywords = {Chemical bath deposition, Flat band potential, Photo response, Power output, Spectral response}, issn = {0925-8388}, doi = {10.1016/j.jallcom.2011.04.084}, author = {Hankare, P. P. and Rathod, K. C. and Chate, P. A. and Garadkar, K. M. and Sathe, D. J. and Mulla, Imtiaz S.} } @article { ISI:000306642100056, title = {Cholesterol-tethered platinum II-based supramolecular nanoparticle increases antitumor efficacy and reduces nephrotoxicity}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {109}, number = {28}, year = {2012}, month = {JUL}, pages = {11294-11299}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Nanoscale drug delivery vehicles have been harnessed extensively as carriers for cancer chemotherapeutics. However, traditional pharmaceutical approaches for nanoformulation have been a challenge with molecules that exhibit incompatible physicochemical properties, such as platinum-based chemotherapeutics. Here we propose a paradigm based on rational design of active molecules that facilitate supramolecular assembly in the nanoscale dimension. Using cisplatin as a template, we describe the synthesis of a unique platinum (II) tethered to a cholesterol backbone via a unique monocarboxylato and O -\> Pt coordination environment that facilitates nanoparticle assembly with a fixed ratio of phosphatidylcholine and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine- N-[amino (polyethylene glycol)-2000]. The nanoparticles formed exhibit lower IC50 values compared with carboplatin or cisplatin in vitro, and are active in cisplatin-resistant conditions. Additionally, the nanoparticles exhibit significantly enhanced in vivo antitumor efficacy in murine 4T1 breast cancer and in K-Ras(LSL/+/)Pten(fl/fl) ovarian cancer models with decreased systemic- and nephro-toxicity. Our results indicate that integrating rational drug design and supramolecular nanochemistry can emerge as a powerful strategy for drug development. Furthermore, given that platinum-based chemotherapeutics form the frontline therapy for a broad range of cancers, the increased efficacy and toxicity profile indicate the constructed nanostructure could translate into a nextgeneration platinum-based agent in the clinics.

}, keywords = {chemotherapy, nanomedicine}, issn = {0027-8424}, doi = {10.1073/pnas.1203129109}, author = {Sengupta, Poulomi and Basu, Sudipta and Soni, Shivani and Pandey, Ambarish and Roy, Bhaskar and Oh, Michael S. and Chin, Kenneth T. and Paraskar, Abhimanyu S. and Sarangi, Sasmit and Connor, Yamicia and Sabbisetti, Venkata S. and Kopparam, Jawahar and Kulkarni, Ashish and Muto, Katherine and Amarasiriwardena, Chitra and Jayawardene, Innocent and Lupoli, Nicola and Dinulescu, Daniela M. and Bonventre, Joseph V. and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article {43249, title = {Comparative genomics of the apicomplexan parasites toxoplasma gondii and neospora caninum: coccidia differing in host range and transmission strategy}, journal = {Plos Pathogens}, volume = {8}, year = {2012}, month = {MAR}, abstract = {Toxoplasma gondii is a zoonotic protozoan parasite which infects nearly one third of the human population and is found in an extraordinary range of vertebrate hosts. Its epidemiology depends heavily on horizontal transmission, especially between rodents and its definitive host, the cat. Neospora caninum is a recently discovered close relative of Toxoplasma, whose definitive host is the dog. Both species are tissue-dwelling Coccidia and members of the phylum Apicomplexa; they share many common features, but Neospora neither infects humans nor shares the same wide host range as Toxoplasma, rather it shows a striking preference for highly efficient vertical transmission in cattle. These species therefore provide a remarkable opportunity to investigate mechanisms of host restriction, transmission strategies, virulence and zoonotic potential. We sequenced the genome of N. caninum and transcriptomes of the invasive stage of both species, undertaking an extensive comparative genomics and transcriptomics analysis. We estimate that these organisms diverged from their common ancestor around 28 million years ago and find that both genomes and gene expression are remarkably conserved. However, in N. caninum we identified an unexpected expansion of surface antigen gene families and the divergence of secreted virulence factors, including rhoptry kinases. Specifically we show that the rhoptry kinase ROP18 is pseudogenised in N. caninum and that, as a possible consequence, Neospora is unable to phosphorylate host immunity-related GTPases, as Toxoplasma does. This defense strategy is thought to be key to virulence in Toxoplasma. We conclude that the ecological niches occupied by these species are influenced by a relatively small number of gene products which operate at the host-parasite interface and that the dominance of vertical transmission in N. caninum may be associated with the evolution of reduced virulence in this species.}, doi = {10.1371/journal.ppat.1002567}, author = {Reid, Adam James and Vermont, Sarah J. and Cotton, James A. and Harris, David and Hill-Cawthorne, Grant A. and Koenen-Waisman, Stephanie and Latham, Sophia M. and Mourier, Tobias and Norton, Rebecca and Quail, Michael A. and Sanders, Mandy and Shanmugam, Dhanasekaran and Sohal, Amandeep and Wasmuth, James D. and Brunk, Brian and Grigg, Michael E. and Howard, Jonathan C. and Parkinson, John and Roos, David S. and Trees, Alexander J. and Berriman, Matthew and Pain, Arnab and Wastling, Jonathan M.} } @article { ISI:000300887700023, title = {Competition between gelation and crystallisation of a peculiar multicomponent liquid system based on ammonium salts}, journal = {Soft Matter}, volume = {8}, number = {12}, year = {2012}, month = {FEB}, pages = {3446-3456}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An exemplar competition between gelation and crystallisation phenomena was examined with an unusual synergistic multicomponent (organo) gelator solution (MGS), which consists of a well-defined methanolic solution of (1R, 2R)-1,2-diaminocyclohexane L-tartrate containing 2.4 equiv. of concentrated hydrochloric acid. The optimal composition of the MGS was determined through meticulous solubility, gelation and structural studies, which support a transient gelation mechanism based on the kinetic self-assembly of the tartrate salt driven by hydrogen-bonding interactions, involving ammonium nitrogen donors and hydroxyl oxygen acceptors, and electrostatic interactions. The hydrochloric acid is involved in the solubilisation of the salt through an ionic dissociation-exchange process, which ends up with the formation-precipitation of (1R, 2R)-1,2-diaminocyclohexane dihydrochloride. As a consequence, an irreversible destruction of the gel takes place, which indicates the metastable nature of this phase that cannot be accessed from the thermodynamically equilibrated state. Gelation of a variety of oxygenated and nitrogenated solvents with moderate polarity occurred efficiently using extremely low MGS concentrations at low temperatures, and the gel phase was confirmed by dynamic rheological measurements. Several features make the described MGS unique: (1) it is a multicomponent solution where each component and its stoichiometry play a key role in the reproducible formation and stabilization of the gels; (2) it is formed by simple, small, and commercially available chiral building blocks (dissolved in a well-defined solvent system), which are easily amenable for further modifications; (3) the gelation phenomenon takes place efficiently at low temperature upon warming up the isotropic solution, conversely to the typical gel preparation protocol; and (4) the formed organogels are not thermoreversible despite the non-covalent interactions that characterize the 3D-network.

}, issn = {1744-683X}, doi = {10.1039/c2sm07183e}, author = {Kapoor, Iti and Schoen, Eva-Maria and Bachl, Jurgen and Kuehbeck, Dennis and Cativiela, Carlos and Saha, Subhadeep and Banerjee, Rahul and Roelens, Stefano and Juan Marrero-Tellado, Jose and Diaz, David Diaz} } @article { ISI:000307188100016, title = {Conversion of cellulose to polyols over promoted nickel catalysts}, journal = {Catalysis Science \& Technology}, volume = {2}, number = {9}, year = {2012}, month = {MAY}, pages = {1852-1858}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Sorbitol is one of the key platform chemicals that can be applied to several industrial applications, including bio-fuels and hydrogen production. Presently there is no commercial heterogeneous catalytic process to produce sorbitol from cellulose due to the low yield and high cost of noble metals required for the conversion. In this paper we describe an aqueous phase hydrolysis-hydrogenation process to convert cellulose to sorbitol using a cheap Ni based catalyst. Monometallic Ni catalysts showed little activity for the reaction, but with the addition of a small amount of Pt to the Ni catalyst (Ni : Pt = 22 : 1 atom ratio), the activity was greatly enhanced. Results showed that the bimetallic Ni-Pt catalysts supported on mesoporous alumina gave a hexitol (sorbitol + mannitol) yield of 32.4\% compared to only 5\% with a Ni catalyst. Moreover, Ni-Pt supported on a mesoporous beta zeolite support provided even higher yield of 36.6\%. These results were obtained after only 6 hours of run at 200 degrees C and 50 bar H-2 pressure (at room temperature). The presence of a small amount of Pt promotes the protonation of water and hydrogen molecules, which spill over to Ni sites creating in situ acid sites to catalyse hydrolysis of cellulose.

}, issn = {2044-4753}, doi = {10.1039/c2cy20119d}, author = {Shrotri, Abhijit and Tanksale, Akshat and Beltramini, Jorge Norberto and Gurav, Hanmant and Chilukuri, Satyanarayana V.} } @article {43073, title = {Development and validation of a simple and sensitive RP-HPLC method for simultaneous estimation of drospirenone and ethinylestradiol in combined tablet dosage form}, journal = {International Journal of Pharmacy and Pharmaceutical Sciences}, volume = {4}, year = {2012}, month = {DEC}, pages = {452-457}, author = {Warkad, Shrikant D. and Santhakumari, B. and Chandewar, A. V.} } @article { ISI:000303018700008, title = {Effect of the A30P mutation on the structural dynamics of micelle-bound alpha synuclein released in water: a molecular dynamics study}, journal = {European Biophysics Journal With Biophysics Letters}, volume = {41}, number = {5}, year = {2012}, month = {MAY}, pages = {483-489}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Atomistic molecular dynamics simulation has been used to probe the effect of the A30P mutation on the structural dynamics of micelle-bound, helical alpha Synuclein when released in an aqueous environment. On the timescales simulated, the effect of the mutation on the secondary structure is restricted to local changes close to the mutation site in the N-terminal helical domain. The changes are transient, and all residues except Lys23 recover their initial structure. The local behavior due to the mutation gives rise to a global difference in the A30P mutant in the form of a permanent kink in the N-terminal helical domain.

}, keywords = {A30P mutation, Alpha synuclein, Kink formation, molecular dynamics simulation, Structural persistence}, issn = {0175-7571}, doi = {10.1007/s00249-012-0803-y}, author = {Chatterjee, Prathit and Sengupta, Neelanjana} } @article { ISI:000302023500063, title = {Efficient, rapid synthesis of bis(indolyl)methane using ethyl ammonium nitrate as an ionic liquid}, journal = {RSC Advances}, volume = {2}, number = {8}, year = {2012}, month = {MAR}, pages = {3525-3529}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A simple and rapid protocol has been developed for an efficient synthesis of bis( indolyl)methane in excellent yields using ethyl ammonium nitrate (EAN) as reusable ionic liquid at room temperature. The protocol involves an electrophilic substitution reaction of indoles with several aldehydes.

}, issn = {2046-2069}, doi = {10.1039/c2ra00849a}, author = {Mulla, Shafeek Abdul Rashid and Sudalai, A. and Pathan, Mohsinkhan Y. and Siddique, Shafi A. and Inamdar, Suleman M. and Chavan, Santosh S. and Reddy, R. Santosh} } @article { ISI:000310863400014, title = {Enantioselective synthesis of the essential oil and pheromonal component ar-himachalene by a chiral pool and chirality induction approach}, journal = {Tetrahedron-Asymmetry}, volume = {23}, number = {18-19}, year = {2012}, month = {OCT}, pages = {1410-1415}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The enantioselective synthesis of both isomers of ar-himachalene has been achieved starting from enantiomerically pure citronellal and p-methyl alpha-methyl styrene as an application of a chiral pool and chirality induction approach, respectively. The key reactions involved in the synthesis include the Sharpless asymmetric dihydroxylation for the induction of chirality at benzylic carbon bearing the methyl group and the use of a hypervalent iodine reagent or trimethylsilyldiazomethane (TMSCHN2) for the six to seven membered ring expansion. (C) 2012 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2012.09.008}, author = {Chavan, Subhash P. and Khatod, Harshali S.} } @article { ISI:000309644400011, title = {Enhanced photocatalytic activity of multi-doped TiO2 for the degradation of methyl orange}, journal = {Applied Catalysis A-General}, volume = {443}, year = {2012}, month = {NOV}, pages = {96-102}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We report the synergistic effect of dopants like Gd, N and Sin enhancing the photocatalytic activity of TiO2. Nanosized TiO2 doped at both cationic and anionic sites by Gd, N and S exhibited increased photocatalytic activity compared to TiO2 doped with either Gd or N and S. All the doped TiO2 existed as anatase phase and no separate phase due to Gd2O3 was seen up to a Gd concentration of 2\%. The particle size as seen from the transmission electron micrograph was similar to 25 nm. The optical absorption property of TiO2 was improved by doping and redshift of the absorption edge is seen for all doped samples compared to pristine TiO2. The red shift of the absorption edge was the highest for the multiple ion-doped sample. Presence of bonded N and S in TiO2 was detected by X-ray photoelectron spectroscopy. Fluorescence lifetime studies indicated an enhanced lifetime for the charge carriers in the doped system compared to pristine TiO2. Photocatalytic activity study showed that the multi-doped sample has the highest activity for the degradation of methyl orange compared to Gd-TiO2, NS-TiO2 and pristine TiO2. The enhanced photocatalytic activity of the multi-doped TiO2 is attributed to factors such as improved optical absorption property and improved lifetime of the charge carriers. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Fluorescence lifetime, Gd N S doped TiO2, Methyl orange, Photocatalyst, Photodegradation}, issn = {0926-860X}, doi = {10.1016/j.apcata.2012.07.032}, author = {Charanpahari, A. and Umare, S. S. and Gokhale, S. P. and Sudarsan, V. and Sreedhar, B. and Sasikala, R.} } @article { ISI:000300185800011, title = {Enhancing the hydrogen storage capacity of Pd-functionalized multi-walled carbon nanotubes}, journal = {Applied Surface Science}, volume = {258}, number = {8}, year = {2012}, month = {FEB}, pages = {3405-3409}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

We demonstrate that the hydrogen storage capacity of multi-walled carbon nanotubes can be enhanced by polyvinylpyrrolidone functionalization. The polyvinylpyrrolidone acts as a stabilizing agent for Pd-nanoparticles, reduces their size and facilitates their uniform and enhanced loading onto multi-walled carbon nanotubes. According to sorption studies, the polyvinylpyrrolidone capping and consequent nanostructural modification enables 2.3 times more hydrogen adsorption than mere Pd-functionalization of multi-walled carbon nanotubes. Corresponding morphological changes before and after polyvinylpyrrolidone capping, characterized using Raman Spectroscopy, X-ray diffraction, TEM and thermal analysis techniques, are also presented. The results contribute towards increasing the efficiency of hydrogen based sustainable energy sources. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Hydrogen based energy sources, Hydrogen storage capacity, Multiwalled carbon nanotubes, Pd functionalization, PVP capping}, issn = {0169-4332}, doi = {10.1016/j.apsusc.2011.11.075}, author = {Singh, Priyanka and Kulkarni, Mukta V. and Gokhale, Suresh P. and Chikkali, Samir H. and Kulkarni, Chandrashekhar V.} } @article { ISI:000312301800017, title = {Epitaxial magnetic oxide nanocrystals via phase decomposition of bismuth perovskite precursors}, journal = {Advanced Functional Materials}, volume = {22}, number = {24}, year = {2012}, month = {DEC}, pages = {5224-5230}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The phase instability of bismuth perovskite (BiMO3), where M is a ferromagnetic cation, is exploited to create self-assembled magnetic oxide nanocrystal arrays on oxide supports. Conditions during pulsed laser deposition are tuned so as to induce complete breakdown of the perovskite precursor into bismuth oxide (Bi2O3) and metal oxide (M-Ox) pockets. Subsequent cooling in vacuum volatizes the Bi2O3 leaving behind an array of monodisperse nanocrystals. In situ reflective high energy electron diffraction beam is exploited to monitor the synthesis in real-time. Analysis of the patterns confirms the phase separation and volatization process. Successful synthesis of M-Ox, where M = Mn, Fe, Co, and Cr, is shown using this template-free facile approach. Detailed magnetic characterization of nanocrystals is carried out to reveal the functionalities such as magnetic anisotropy as well as larger than bulk moments, as expected in these oxide nanostructures.

}, keywords = {Bi2O3 evaporation, bismuth perovskites, epitaxial nanostructures, magnetic oxides, phase separation}, issn = {1616-301X}, doi = {10.1002/adfm.201201066}, author = {Bogle, Kashinath A. and Cheung, Jeffrey and Chen, Yong-Lun and Liao, Sheng-Chieh and Lai, Chih-Hung and Chu, Ying-Hao and Gregg, John M. and Ogale, Satishchandra B. and Valanoor, Nagarajan} } @article {42782, title = {Ethyl oligo-silicates with strong acid heterogeneous polymeric catalysts}, number = {PCT/IB2011/002531}, year = {2012}, month = {MAY}, type = {Application}, abstract = {

The present invention provides a process for the synthesis of ethyl silicate with varying silica concentration, by hydrolysing ethyl silicate in varying water concentration in the presence of sulfonated catalysts having a styrene-divinyl benzene backbone. The present invention further relates to the preparation of beaded crosslinked polymers containing sulfonic acid moieties having an interconnected pore structure and surface area up to 400 m2 /g.

}, author = {Bevara, Madhusudana Rao and Bhongale, Sunil Sitaram and Bhosle, Sonali Madhavrao and Chavan, Nayaku and Chelanattukizhakkemadath, Raman Rajan and Deokar, Sarika Babasaheb and Dhoble, Deepa Arun and Dwivedi, Mayank and Ghorpade, Ravindra V. and Harikrishna, Reghunathan and Dhanasekharan, Janakiraman and John, Aruldoss and Locanindi, Hari Sarvothama Rao and Momin, Mohasin Shamshuddin and Mulani, Khudbudin Baban and Mule, Smita Atmaram and Nalawade, Archana Chetan and Punitharasu, Vellimalai and Qureshi, Mohammed Shadbar and Kumar, Tayal Rajiv and Shaikh, Wasif Abdul Lateef and Sontakke, Kalpana Vishwanathrao and Reddy, Krishna Mohan Srinivasulu and Sriperambudur, Rajesh Kumar and Ponrathnam, Surendra} } @article { ISI:000306946500009, title = {FeCl3/Montmorillonite K10 as an efficient catalyst for solvent-free aza-Michael reaction between amine and alpha,beta-unsaturated compounds}, journal = {RSC Advances}, volume = {2}, number = {18}, year = {2012}, month = {JUN}, pages = {7061-7065}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A highly efficient, inexpensive and greener protocol for aza-Michael addition reaction of different aromatic and aliphatic/cyclic amines to alpha,beta-unsaturated compounds using a FeCl3/MontK10 catalyst under solvent-free conditions has been developed. The Michael addition products are obtained in good to excellent yields. The catalyst was insensitive to moisture and it also showed excellent reusability in the reaction. Its high activity is attributed mostly to redox properties of FeCl3.

}, issn = {2046-2069}, doi = {10.1039/c2ra01323a}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Patil, S. K.} } @article { ISI:000298731200036, title = {Fluorinated metal-organic frameworks: advantageous for higher H-2 and CO2 adsorption or not?}, journal = {Chemistry-A European Journal}, volume = {18}, number = {2}, year = {2012}, month = {JAN}, pages = {688-694}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The synthesis, structure, and gas adsorption properties of three new metalorganic frameworks (MOFs) designed from isonicotinic acid (INA) and its fluorinated analogue 3-fluoroisonicotinic acid (FINA) along with CoII as the metal center have been reported. Co-INA-1 ([Co3(INA)4(O)(C2H5OH)3][NO3].C2H5OH.3?H2O; INA=isonicotinic acid) and Co-INA-2 ([Co(INA)2].DMF) are structural isomers as are Co-FINA-1 ([Co3(FINA)4(O)(C2H5OH)2].H2O; FINA=3-fluoroisonicotinic acid) and Co-FINA-2 ([Co(FINA)2].H2O), but the most important thing to note here is that Co-INA-1 and Co-FINA-1 are isostructural as are Co-INA-2 and Co-FINA-2. The effect of partial introduction of fluorine atoms into the framework on the gas uptake properties of MOFs having similar structures has been analyzed experimentally and computationally in isostructural MOFs.

}, keywords = {cobalt, fluorine, Hydrogen storage, metal-organic frameworks, microporous materials, X-ray diffraction}, issn = {0947-6539}, doi = {10.1002/chem.201102295}, author = {Pachfule, Pradip and Chen, Yifei and Jiang, Jianwen and Banerjee, Rahul} } @article { ISI:000303429600017, title = {Formal synthesis of (-)-stemoamide using a useful epimerization at C-8}, journal = {Tetrahedron Letters}, volume = {53}, number = {21}, year = {2012}, month = {MAY}, pages = {2647-2650}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The formal synthesis of (-)-stemoamide was achieved starting from L-pyroglutamic acid. The key steps used are the allylation using BF3 center dot OEt2, ring closing metathesis, allylic oxidation and a novel epimerization at C8. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Allylation, Allylic oxidation, Pyroglutamic acid, Ring closing metathesis, Stemoamide}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2012.03.054}, author = {Chavan, Subhash P. and Harale, Kishor R. and Puranik, Vedavati G. and Gawade, Rupesh L.} } @article { ISI:000295666100008, title = {Geographic variation in the flavour volatiles of alphonso mango}, journal = {Food Chemistry}, volume = {130}, number = {1}, year = {2012}, month = {JAN}, pages = {58-66}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Alphonso, one of the most popular cultivars of mango in India is known to exhibit geographic variation in the flavour of ripe fruits. To get chemical insight into this difference, volatiles were studied in the ripening fruits of Alphonso mangoes from three cultivation locations in India. Ripe fruits from Deogad had lower content of mono- and sesquiterpenes and higher content of lactones and furanones as compared to the fruits from Dapoli: whereas fruits from Vengurle had average quantities of these chemicals in comparison with Deogad and Dapoli fruits. This variation was clearly reflected as separate clustering of the localities in the Principal Component Analysis. The localities were indistinguishable from each other in terms of raw fruit volatiles. This study exemplifies a case of phenotypic plasticity; since the plants chosen were clonally propagated, such geographic variation in the volatiles can be attributed to varied abiotic conditions at these three localities. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Mango, Phenotypic plasticity, Ripening, Volatiles}, issn = {0308-8146}, doi = {10.1016/j.foodchem.2011.06.053}, author = {Kulkarni, Ram S. and Chidley, Hemangi G. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article { ISI:000308896400057, title = {Heterocyclic tri-urea isocyanurate bridged groups modified periodic mesoporous organosilica synthesized for Fe(III) adsorption}, journal = {Journal of Solid State Chemistry}, volume = {194}, year = {2012}, month = {OCT}, pages = {392-399}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

To achieve a high level of heavy metal adsorption, 1,1{\textquoteright},1 {\textquoteleft}{\textquoteright}-(1,3,5-triazine-2,4,6-triyl)tris(3-(3-(triethoxysilyl) propyl)urea) (TTPU) was synthesized as a novel melamine precursor and incorporated on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs) were synthesized under acidic conditions using TTPU, tetraethylorthosilicate (TEOS) and Pluronic P123 as a template and the modified PMOs were characterized using the relevant instrumental techniques. The characteristic materials were used as adsorbents for the adsorption of Fe(III) ions. Fe(III) adsorption studies revealed MPMO-7.5 to be a good absorbent with higher adsorption efficiency than other MPMOs. (C) 2012 Elsevier Inc. All rights reserved.

}, keywords = {Adsorption efficiency, Fe(III) adsorption, Melamine, Periodic mesoporous organosilica (PMO)}, issn = {0022-4596}, doi = {10.1016/j.jssc.2012.05.019}, author = {Rana, Vijay Kumar and Selvaraj, M. and Parambadath, Surendran and Chu, Sang-Wook and Park, Sung Soo and Mishra, Satyendra and Singh, Raj Pal and Ha, Chang-Sik} } @article { ISI:000308778100017, title = {Highly diastereoselective total synthesis of (+/-)-heritonin and (+/-)-heritol}, journal = {Tetrahedron}, volume = {68}, number = {40}, year = {2012}, month = {OCT}, pages = {8509-8514}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A highly diastereoselective synthesis of heritol and heritonin by intramolecular cyclization on a preformed sensitive butenolide functionality is described. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Butenolide, cyclization, Dihydroxylation, Friedel-Crafts acylation, Tetralone}, issn = {0040-4020}, doi = {10.1016/j.tet.2012.07.020}, author = {Chavan, Subhash P. and Garai, Sumanta and Kalkote, Uttam R.} } @article { ISI:000308046400038, title = {Hybrid molecules of carvacrol and benzoyl urea/thiourea with potential applications in agriculture and medicine}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {22}, number = {17}, year = {2012}, month = {SEP}, pages = {5550-5554}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Benzoyl phenyl urea, a class of insect growth regulator{\textquoteright}s acts by inhibiting chitin synthesis. Carvacrol, a naturally occurring monoterpenoid is an effective antifungal agent. We have structurally modified carvacrol (2-methyl-5-[1-methylethyl] phenol) by introducing benzoylphenyl urea linkage. Two series of benzoylcarvacryl thiourea (BCTU, 4a-f) and benzoylcarvacryl urea (BCU, 5a-f) derivatives were prepared and characterized by elemental analysis, IR, H-1 and C-13 NMR and Mass spectroscopy. Derivatives 4b, 4d, 4e, 4f and 5d, 5f showed comparable insecticidal activity with the standard BPU lufenuron against Dysdercus koenigii. BCTU derivatives 4c, 4e and BCU 5c showed good antifungal activity against phytopathogenic fungi viz. Magnaporthe grisae, Fusarium oxysporum, Dreschlera oryzae; food spoilage yeasts viz. Debaromyces hansenii, Pichia membranifaciens; and human pathogens viz. Candida albicans and Cryptococcus neoformans. Compounds 5d, 5e and 5f showed potent activity against human pathogens. Moderate and selective activity was observed for other compounds. All the synthesized compounds were non-haemolytic. These compounds have potential application in agriculture and medicine. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Antifungal agents, Benzoyl carvacryl urea, Benzoyl phenyl urea, Crop protection agents, Insect growth regulators}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2012.07.017}, author = {Pete, Umesh D. and Zade, Chetan M. and Bhosale, Jitendra D. and Tupe, Santosh G. and Chaudhary, Preeti M. and Dikundwar, Amol G. and Bendre, Ratnamala S.} } @article { ISI:000310482800011, title = {Identification of cholesterol binding sites in the serotonin(1A) receptor}, journal = {Journal of Physical Chemistry B}, volume = {116}, number = {43}, year = {2012}, month = {NOV}, pages = {12991-12996}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The serotonin(1A) receptor is a representative member of the G protein-coupled receptor (GPCR) superfamily and serves as an important drug target in the development of therapeutic agents for neuropsychiatric disorders. Previous work has shown the requirement of membrane cholesterol in the organization, dynamics, and function of the serotonin(1A) receptor. We show here that membrane cholesterol binds preferentially to certain sites on the serotonin(1A) receptor by performing multiple, long time scale MARTINI coarse-grain molecular dynamics simulations. Interestingly, our results identify the highly conserved cholesterol recognition/interaction amino acid consensus (CRAC) motif on transmembrane helix V as one of the sites with high cholesterol occupancy, thereby confirming its role as a putative cholesterol binding motif. These results represent the first direct evidence for membrane cholesterol binding to specific sites on the serotonin(1A) receptor and represent an important step in our overall understanding of GPCR function in health and disease.

}, issn = {1520-6106}, doi = {10.1021/jp309888u}, author = {Sengupta, Durba and Chattopadhyay, Amitabha} } @article { ISI:000308878400007, title = {Immobilization of enantioselective lipase on soluble supports for kinetic resolution of drug intermediates}, journal = {Journal of Bioactive and Compatible Polymers}, volume = {27}, number = {5}, year = {2012}, month = {SEP}, pages = {499-509}, publisher = {SAGE PUBLICATIONS LTD}, address = {1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND}, abstract = {

The microbial lipase, Arthrobacter sp. lipase (MTCC 5125), from the Indian Institute of Integrative Medicine repository, is known as an effective catalyst for high enantioselective kinetic resolution of drug intermediates. The ABL was immobilized on water-soluble linear supports by covalently binding it to the epoxy groups on the N-vinyl pyrrolidone/allyl glycidyl ether and N-vinyl pyrrolidone/glycidyl methacrylate copolymers. The immobilized lipase, on different soluble supports, had 90-110 mg/g protein binding and 500-700 U/g hydrolysis activities for tributyrin substrate. These copolymers had soluble/insoluble characteristics in different pH ranges, which is an advantage over insoluble copolymers. A soluble polymer at neutral pH provided better accessibility to the immobilized enzyme, which was recovered by precipitation at pH 2-3 for reuse. Kinetic resolution of racemic acyl derivatives of chiral auxiliaries and drug intermediates, namely, phenyl ethanol, aminoalcohol, and fluoxetine intermediate resulted in a significant enhancement in enantioselectivity (99\%).

}, keywords = {Arthrobacter sp lipase, Enantioselectivity, Immobilization, Kinetic resolution, N-vinylpyrrolidone, soluble polymer}, issn = {0883-9115}, doi = {10.1177/0883911512453638}, author = {Chaubey, Asha and Parshad, Rajinder and Taneja, Subhash C. and Deokar, Sarika Babasaheb and Raman, Rajan C. and Ponrathnam, Surendra} } @article {42519, title = {Interfacial and film formation behavior of photoactive Ru(ii)bipyridyl based metallosurfactants and a rare example of a monolayer based logic gate approach}, journal = {Chempluschem}, volume = {77}, year = {2012}, month = {DEC}, pages = {1096{\textendash}1105}, abstract = {

Three derivatives of tris(bipyridyl){\textendash}ruthenium(II) complexes with different alkyl-chain lengths (nC18H37 (1), nC14H29 (2) and nC10H21 (3)) were synthesised. All these complexes behaved as an amphiphile and their surface properties were studied at the air{\textendash}water interface by measuring surface pressure{\textendash}area (Π{\textendash}A) isotherms. The surface morphology of the resulting films at the air{\textendash}water interface was also studied by using Brewster angle microscopy. Mean molecular areas of these complexes were measured from the Π{\textendash}A isotherms, which were approximately 200 {\r A}2, thereby indicating a parallel arrangement of the Ru{\textendash}bipyridyl moiety of the complexes. Mono- and multilayer Langmuir{\textendash}Blodgett (LB) films were formed on different solid surfaces with transfer ratios close to one. Similarities in the absorption and fluorescence spectra of these amphiphiles in solution as well as in LB films deposited on a quartz surface confirmed the successful transfer of these films onto the substrates. The latter provided information about the arrangements of metallosurfactant molecules within the LB films. The two-dimensional concentrations of these films were calculated from the Lambert{\textendash}Beer law as well as from the Π{\textendash}A isotherm, which confirmed regular and reproducible transfer of the complex monolayers from the air{\textendash}water interface onto the quartz surface. The surface morphology of these films on various substrates was characterised by atomic force microscopy. Furthermore, by oxidising the monolayer of complex 3, a one-input sequential logic gate was constructed.

}, doi = {10.1002/cplu.201200207}, author = {Mahato, Prasenjit and Saha, Sukdeb and Choudhury, Sipra and Das, Amitava} } @article { ISI:000309569200044, title = {Kernel morphometric traits in hexaploid wheat (Triticum aestivum L.) are modulated by intricate QTL x QTL and genotype x environment interactions}, journal = {Journal of Cereal Science}, volume = {56}, number = {2}, year = {2012}, month = {SEP}, pages = {432-439}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Wheat kernel size and shape influence its flour yield and market price. A hexaploid wheat population of 185 recombinant inbred lines was evaluated for five kernel morphometric traits namely, 1000-kernel weight, kernel length, width, length width ratio and factor form density in two diverse agro-climatic regions in India in five to eight year location combinations. Additive main effects and multiplicative interaction analysis revealed significant contributions from genotype (G) and genotype x environment (G x E) effects for these traits. Quantitative trait locus (QTL) analysis by composite interval mapping (CIM) was performed using a linkage map of 251 SSR markers and 59 QTLs distributed on 16 chromosomes were identified. The majority of the QTLs were located on the D genome (44.07\%) and the homeologous chromosomes of Group 2 (38.98\%). Stable QTLs detected in three or more year location combinations were identified for four traits. Multi-trait CIM showed 10 chromosomal regions harboring putative pleiotropic loci. Complexity in the genetic effects was further revealed by QTL analysis based on mixed-linear model that indicated 19 QTLs with significant individual effects (main-effect QTLs) and 14 QTL x QTL interactions. Five of these - nineteen main-effect QTLs and one of the fourteen QTL x QTL interactions showed environmental influence. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Epistatic QTLs, Genotype x environment interactions, Kernel size and shape, Stable QTLs}, issn = {0733-5210}, doi = {10.1016/j.jcs.2012.05.010}, author = {Prashant, Ramya and Kadoo, Narendra Y. and Desale, Charushila and Kore, Prajakta and Dhaliwal, Harcharan Singh and Chhuneja, Parveen and Gupta, Vidya} } @article {43378, title = {Kinetic modeling and optimization of operating parameters for transvinylation of lauric acid}, journal = {International Journal of Chemical Kinetics}, volume = {44}, year = {2012}, month = {SEP}, pages = {624-634}, abstract = {The transition metal complex catalyzed transvinylation of carboxylic acid with vinyl acetate monomer is of significant interest to industry. The palladium complex catalyzed transvinylation of lauric acid using vinyl acetate monomer is a reversible reaction. In present article, design of experiments (DOE) statistics is used to study effects of various operating parameters on transvinylation of lauric acid. The kinetic parameters forward and backward rate constants and the thermodynamic parameters such as equilibrium constant and energy of activation of the transvinylation of lauric acid were estimated using the Dynochem model. The optimum operating parameters for the transvinylation of lauric acid were then predicted using the Dynochem model and verified by performing the actual experiments to validate the model. It was found that the experimental results match with the predicted one. (c) 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 624634, 2012}, doi = {10.1002/kin.20704}, author = {Kamble, Sanjay P. and Manjarekar, Onkar and Mawale, Ravi and Kulkarni, Bhaskar D. and Chowdary, Naresh and Gupte, Milind Y. and Barve, Prashant P.} } @article { ISI:000301965000034, title = {Ligand free, highly efficient synthesis of diaryl ether over copper fluorapatite as heterogeneous reusable catalyst}, journal = {Tetrahedron Letters}, volume = {53}, number = {14}, year = {2012}, month = {APR}, pages = {1826-1829}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A novel ligand-free, highly efficient, and an inexpensive method has been developed by using ecofriendly, heterogeneous reusable copper fluorapatite (CuFAP) catalyst for the synthesis of diaryl ethers from the cross coupling reaction of the various substituted aryl halides (fluoride, chloride, bromide, and iodide) with the potassium salts of various substituted phenols in the presence of N-methyl 2-pyrrolidone (NMP) as a solvent at 120 degrees C. The protocol obtained the corresponding cross coupling products in good to excellent yield. The CuFAP catalyst was recovered by simple filtration from the reaction mixture and reused several times without the loss of catalytic activity. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Arylhalide, Copper fluorapatite, Diaryl ethers, phenol, Ullmann coupling}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2012.01.124}, author = {Mulla, Shafeek Abdul Rashid and Inamdar, Suleman M. and Pathan, Mohsinkhan Y. and Chavan, Santosh S.} } @article { ISI:000309787500006, title = {Ligand promoted and controlled palladium-catalyzed intramolecular Heck reaction of homoallyl alcohols: a facile synthesis of cyclopentaannulated quinolines}, journal = {Tetrahedron}, volume = {68}, number = {45}, year = {2012}, month = {NOV}, pages = {9206-9210}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Bidentate phosphine ligands in palladium-catalyzed intramolecular Heck reactions of 2-chloroquinolin-3-yl-(1-homoallyl)alcohols are described to afford facile synthesis of 3-methylene-2,3-dihydro-1H-cy-clopenta[b]quinolines in improved yields. We further observed using bulky aromatic phosphine ligand in Pd-catalyzed intermolecular Heck coupling reaction at olefinic centers with iodobenzene also favored exclusively Heck products in excellent yield. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Heck cyclization, Homoallyl alcohol, Ligand promoted, Palladium-catalyzed, Quinoline}, issn = {0040-4020}, doi = {10.1016/j.tet.2012.08.088}, author = {Singh, Radhey M. and Chandra, Atish and Sharma, Neha and Singh, Bhawana and Kumar, Ritush} } @article { ISI:000300458300075, title = {Low plasma albumin levels are associated with increased plasma protein glycation and HbA1c in diabetes}, journal = {Journal of Proteome Research}, volume = {11}, number = {2}, year = {2012}, month = {FEB}, pages = {1391-1396}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Albumin is one of the most abundant plasma proteins and is heavily glycated in diabetes. In this study, we have addressed whether variation in the albumin levels influence glycation of plasma proteins and HbA1c. The study was performed in three systems: (1) streptozotocin (STZ)-induced diabetic mice plasma, (2) diabetic clinical plasma, and (3) in vitro glycated plasma. Diabetic mice and clinical plasma samples were categorized as diabetic high albumin plasma (DHAP) and diabetic low albumin plasma (DLAP) on the basis of their albumin levels. For the in vitro experiment, two albumin levels, high albumin plasma (HAP) and low albumin plasma (LAP), were created by differential depletion of plasma albumin. Protein glycation was studied by using a combination of two-dimensional electrophoresis (2DE), Western blotting, and LC-MSE. In both mice and clinical experiments, an increased plasma protein glycation was observed in DLAP than in DHAP. Additionally, plasma albumin levels were negatively correlated with HbA1c. The in vitro experiment with differential depletion of albumin mechanistically showed that the low albumin levels are associated with increased plasma protein glycation and that albumin competes for glycation with other plasma proteins.

}, keywords = {advanced glycation end products (AGEs), Albumin, glucose, post translational modification}, issn = {1535-3893}, doi = {10.1021/pr201030m}, author = {Bhonsle, Hemangi S. and Korwar, Arvind M. and Kote, Sachin S. and Golegaonkar, Sandeep B. and Chougale, Ashok D. and Shaik, Mahemud L. and Dhande, Nitin L. and Giri, Ashok P. and Shelgikar, Kishore M. and Boppana, Ramanamurthy and Kulkarni, Mahesh J.} } @article { ISI:000311190800033, title = {MgCl2 center dot 6C(6)H(11)OH: a high mileage porous support for ziegler-natta catalyst}, journal = {Journal of Physical Chemistry C}, volume = {116}, number = {45}, year = {2012}, month = {NOV}, pages = {24115-24122}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A new and single phase molecular adduct of MgCl2 with six cyclohexanol molecules MgCl2 center dot 6C(6)H(11)OH (MgCyOH) has been synthesized. Structural insight to this adduct was obtained by a variety of physicochemical methods. C-13 CPMAS spectrum and single pulse MAS spectra with high power proton decoupling recorded at different relaxation time showed the presence of two different sets of magnetically unequal cylcohexanol molecules present around Mg2+. A Raman feature of MgCyOH at 712 cm(-1) confirms that cylcohexanol molecules are present around Mg2+ in an octahedral environment. MgCyOH has been used as support material to prepare Ziegler-Natta (Z-N) active catalyst. Textural property of above Z-N catalyst exhibits high surface area (236 m(2)/g) with high porosity. Above active catalyst has been screened for ethylene polymerization. Depending on the cocatalyst employed (Me3Al, Et3Al, and iso-Bu3Al) and ethylene pressure, polyethylene yield varies an order of magnitude, from 378 to 3570 g/g catalyst, indicating a possible creation of different active sites and different interaction between cocatalyst and catalyst.

}, issn = {1932-7447}, doi = {10.1021/jp3074078}, author = {Gnanakumar, Edwin S. and Thushara, K. S. and Gowda, Ravikumar R. and Raman, Sumesh K. and Ajithkumar, Thalasseril G. and Rajamohanan, P. R. and Chakraborty, Debashis and Gopinath, Chinnakonda S.} } @article { ISI:000305444200038, title = {Molecular dynamics simulation of phosphoric acid doped monomer of polybenzimidazole: a potential component polymer electrolyte membrane of fuel cell}, journal = {Journal of Physical Chemistry B}, volume = {116}, number = {24}, year = {2012}, month = {JUN}, pages = {7357-7366}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Phosphoric acid doped polybenzimidazole is promising electrolyte membranes for high temperature (100 degrees C and above) fuel cells. Proton conduction is governed by the amount of phosphoric acid content in the polymer membrane. In this present work, we perform molecular dynamics simulations on phosphoric acid doped 2-phenyl-1H,1{\textquoteright}H-5,5{\textquoteright}-bibenzo[d]imidazole (monomer unit of polybenzimidazole) to characterize the structural and dynamical properties at varying phosphoric acid content and temperature. From the structural analysis, we have predicted the arrangement of the phosphoric acids, formation of H-bonds in the system, and the contribution of different atoms toward H-bonding. We have also examined the stacking of 2-phenyl-1H,1{\textquoteright}H-5,5{\textquoteright}-bibenzo[d]imidazole molecules and how their arrangement changes with the increasing amount of PA in the system with the help of cluster analysis. From the molecular dynamics simulation conducted at different temperatures and phosphoric acid doping level, we have predicted the diffusion of phosphoric acid and monomer. As a dynamic quantity, we have also calculated ring flipping of the imidazole ring of the monomer.

}, issn = {1520-6106}, doi = {10.1021/jp301117m}, author = {Pahari, Swagata and Choudhury, Chandan Kumar and Pandey, Prithvi Raj and More, Minal and Venkatnathan, Arun and Roy, Sudip} } @article { ISI:000321561204290, title = {Multi-Hit action of membrane active peptides: towards understanding bacterial cell killing}, journal = {Biophysical Journal}, volume = {102}, number = {3, 1}, year = {2012}, note = {56th Annual Meeting of the Biophysical-Society, San Diego, CA, FEB 25-29, 2012}, month = {JAN}, pages = {616A}, publisher = {Biophys Soc}, address = {600 TECHNOLOGY SQUARE, 5TH FLOOR, CAMBRIDGE, MA 02139 USA}, issn = {0006-3495}, author = {Moiset, Gemma and Cirac, Anna D. and Mika, Jacek T. and Kocer, Armagan and Stuart, Marc C. A. and Sengupta, Durba and Marrink, Siewert-Jan and Poolman, Bert} } @article { ISI:000306766200040, title = {NaIO4-NaN3-mediated diazidation of styrenes, alkenes, benzylic alcohols, and aryl ketones}, journal = {Tetrahedron Letters}, volume = {53}, number = {32}, year = {2012}, month = {AUG}, pages = {4195-4198}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Sodium periodate and sodium azide combination has been found to be an excellent reagent system suitable for the direct diazidation of styrenes, alkenes, benzylic alcohols, and aryl ketones to produce the corresponding vicinal and geminal diazides respectively in high yields under mild reaction conditions. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {alkenes, Aryl ketones, Geminal diazides, Sodium periodate, Vicinal diazides}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2012.05.140}, author = {Kamble, Dayanand A. and Karabal, Pratibha U. and Chouthaiwale, Pandurang V. and Sudalai, Arumugam} } @article {42496, title = {New chemodosimetric reagents as ratiometric probes for cysteine and homocysteine and possible detection in living cells and in blood plasma}, journal = {Chemistry a European Journal}, volume = {18}, year = {2012}, month = {NOV}, pages = {15382{\textendash}15393}, abstract = {

In this work, we have rationally designed and synthesized two new reagents (L1 and L2), each bearing a pendant aldehyde functionality. This aldehyde group can take part in cyclization reactions with β- or γ-amino thiols to yield the corresponding thiazolidine and thiazinane derivatives, respectively. The intramolecular charge-transfer (ICT) bands of these thiazolidine and thiazinane derivatives are distinctly different from those of the molecular probes (L1 and L2). Such changes could serve as a potential platform for using L1 and L2 as new colorimetric/fluorogenic as well as ratiometric sensors for cysteine (Cys) and homocysteine (Hcy) under physiological conditions. Both reagents proved to be specific towards Cys and Hcy even in the presence of various amino acids, glucose, and DNA. Importantly, these two chemodosimetric reagents could be used for the quantitative detection of Cys present in blood plasma by using a pre-column HPLC technique. Such examples are not common in contemporary literature. MTT assay studies have revealed that these probes have low cytotoxicity. Confocal laser scanning micrographs of cells demonstrated that these probes could penetrate cell membranes and could be used to detect intracellular Cys/Hcy present within living cells. Thus, the results presented in this article not only demonstrate the efficiency and specificity of two ratiometric chemodosimeter molecules for the quantitative detection of Cys and Hcy, but also provide a strategy for developing reagents for analysis of these vital amino acids in biological samples.

}, keywords = {charge transfer; chemodosimetric detection; cysteine/ homocysteine sensors; fluorescent probes; imaging agents; ratiometric probes}, doi = {10.1002/chem.201201621}, author = {Das, Priyadip and Mandal, Amal Kumar and Chandar, Nellore Bhanu and Baidya, Mithu and Bhatt, Harshad B. and Ganguly, Bishwajit and Ghosh, Sudip K. and Das, Amitava} } @proceedings { ISI:000306973500619, title = {Noble metal ions incorporated in lattice points of perovskites - water gas shift activity of BaCe1-xPtxO3-d}, volume = {1447}, year = {2012}, note = {56th DAE-Solid State Physics Symposium (SSPS), SRM Univ, Kattankulathur, INDIA, DEC 19-23, 2011}, month = {JUN}, pages = {1277-1278}, publisher = {Govt India, Dept Atom Energy (DAE), Board Res Nucl Sci (BRNS)}, address = {2 Huntington Quadrangle, Ste 1no1, Melville, NY 11747-4501 USA}, abstract = {

Recently precious metals supported on oxides were reported to be very promising catalysts for the lower-temperature WGS reaction. Here we report the synthesis of platinum doped barium cerate and its use as catalysts for WGS reaction. It has been found that maximum CO conversion was obtained at 350 degrees C which enhanced after the first cycle. XPS analysis shows that after the first cycle more ionic Platinum species are present on the surface of the catalyst. Neutron diffraction at room temperature shows that the oxygen vacancies are in the O2 position and increases with increasing Pt substitution.

}, keywords = {BaCeO3, Neutron diffraction, Platinum catalysis, WGS reaction}, isbn = {978-0-7354-1044-2}, issn = {0094-243X}, doi = {10.1063/1.4710478}, author = {Jijil, Chamundi P. and Rajarajan, A. K. and Devi, R. Nandini}, editor = {Mittal, R. and Chauhan, A. K. and Mukhopadhyay, R.} } @article { ISI:000311698800036, title = {One-pot sol-gel preparation for efficient cobalt-molybdenum-titania hydrotreating catalysts}, journal = {Chemcatchem}, volume = {4}, number = {12}, year = {2012}, month = {DEC}, pages = {2112-2120}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Titania-based hydrodesulfurization catalysts were prepared by using a one-pot solgel method with the titanium peroxo complex as titanium precursor and molybdenum and cobalt precursors dissolved in the aqueous hydrogen peroxide solution used during synthesis. Catalysts with MoO3 loadings varying from 5 to 40 wt?\% and a Co/Mo atomic ratio of 0.5 were prepared. Solids with molybdenum loadings below 20 wt?\% MoO3 demonstrated poor hydrodesulfurization activity for the model compound thiophene. This was attributed to the presence of a large amount of embedded cobalt and molybdenum species in the titania matrix. A significant increase in the catalytic activity was observed for solids containing 20 and 25 wt?\% of MoO3 on which active species appeared to be accessible on the titania surface. Furthermore, the highest conversion obtained on these solgel solids was superior to the highest conversion obtained on reference catalysts prepared through the impregnation of ammonium heptamolybdate and cobalt nitrate on commercial titania.

}, keywords = {cobalt, heterogeneous catalysis, Molybdenum, sol-gel process, titanium}, issn = {1867-3880}, doi = {10.1002/cctc.201200165}, author = {Nguyen, D. L. and Gillot, S. and Souza, D. O. and Blanchard, P. and Lamonier, Carole and Berrier, E. and Kotbagi, T. V. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Cristol, S. and Payen, E. and Lancelot, Christine} } @article { ISI:000302634800023, title = {Organization of cubic CeO2 nanoparticles on the edges of self assembled tapered ZnO nanorods via a template free one-pot synthesis: significant cathodoluminescence and field emission properties}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {18}, year = {2012}, month = {MAR}, pages = {8887-8895}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The present investigation explores the controlled architecture of a CeO2-ZnO nanocomposite via a template-free, low temperature, facile single step solvothermal approach. This complex architecture depicts cubic single crystalline CeO2 nanoparticles (size similar to 15 nm) grown on the edges of tapered ZnO nanorods with definite orientations and alignments. The formation of wurtzite ZnO, cubic CeO2 and the coexistence of Ce3+ and Ce4+ on the surface of the CeO2-ZnO nanocomposites are confirmed using various characterization tools. The finding of such unique nanostructures by a facile method is exemplified by a plausible growth mechanism. Surprisingly, the aqueous mediated ultrasonication reaction conferred the formation of crystalline ZnO nanotubes of diameter similar to 50 nm. Spatially resolved cathodoluminescence spectra are obtained by linearly scanning an individual CeO2-ZnO nanorod along its length, which reveals the size-dependent surface effects. Interestingly, such hybrid CeO2-ZnO nanoarchitecture is observed to exhibit enhanced field emission properties, demonstrating better current stability as compared to other ZnO nanostructures. This is attributed mainly to strong surface interactions between the Ce-ionic species and the ZnO nanorods. Herein, a soft-chemical approach is used for the first time to architect a binary oxide nanostructure, which is otherwise accomplished using high temperature techniques, as reported elsewhere. Also, the present work not only gives insight into understanding the hierarchical growth behaviour of the CeO2-ZnO nanocomposite in a solution phase synthetic system, but also provides an efficient route to enhance the field emission performance of ZnO nanostructures, which could be extended to other potential applications, such as chemical sensors, optoelectronic devices and photocatalysts.

}, issn = {0959-9428}, doi = {10.1039/c2jm30226h}, author = {Warule, Sambhaji S. and Chaudhari, Nilima S. and Kale, Bharat B. and Patil, Kashinath R. and Koinkar, Pankaj M. and More, Mahendra A. and Murakami, Ri-ichi} } @article { ISI:000299582200011, title = {Pd-catalyzed selective hydrosilylation of aryl ketones and aldehydes}, journal = {Tetrahedron Letters}, volume = {53}, number = {2}, year = {2012}, month = {JAN}, pages = {148-150}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Pd salts in combination with triethylsilane as hydride source and DMF as solvent has been found to be excellent catalytic combination that selectively reduces aryl ketones and aldehydes under mild conditions to afford triethylsilyloxy compounds in excellent yields. Product selectivity to the respective benzyl alcohols can however be achieved when the reaction was performed in DMF/H2O (4:1) as solvent system. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {aldehydes, Hydrosilylation, Ketones, Palladium, Triethylsilane}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2011.10.155}, author = {Chouthaiwale, Pandurang V. and Rawat, Varun and Sudalai, Arumugam} } @article { ISI:000300929600025, title = {Photopolymerization kinetics of 2-phenylethyl (meth) acrylates studied by photo DSC}, journal = {Journal of Polymer Research}, volume = {19}, number = {2}, year = {2012}, month = {JAN}, pages = {9811}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The present work deals with the photopolymerization of 2-phenylethyl (meth)acrylates and estimation of their kinetic parameters. Formulations were made by independently homogenizing the monomers with photoinitiators of two different classes. Two different compositions of photoinitiators were used to study the effect of concentration of photoinitiator on cure kinetics. These compositions obtained were tested for photo curing performance using differential photocalorimetry (DPC) or photo DSC under polychromatic radiation. The heat flow against time was recorded for all formulations under isothermal conditions and the rates of polymerization as well as the percentage conversions were estimated. It was observed that due to a longer timescale for reaction diffusion, the methacrylate formulations showed a higher conversion than acrylate formulations. Other parameters such as induction time, maximum rate and conversion attained as well as the time to attain peak maximum were noted. The photopolymerization and kinetic estimations of the formulations including evaluation of kinetic models are discussed.

}, keywords = {Bimolecular termination model, Photo DSC, Photopolymerization, Variable autocatalytic model}, issn = {1022-9760}, doi = {10.1007/s10965-011-9811-3}, author = {Ghorpade, Ravindra V. and Bhosle, Sonali Madhavrao and Ponrathnam, S. and Rajan, C. R. and Chavan, Nayaku and Harikrishna, Reghunathan} } @article { ISI:000310934400049, title = {Polybenzimidazole mediated N-doping along the inner and outer surfaces of a carbon nanofiber and its oxygen reduction properties}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {44}, year = {2012}, month = {NOV}, pages = {23668-23679}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Nitrogen-doped (N-doped) hollow carbon nanofiber (CNF) was synthesized by incorporating a nitrogen containing polymer precursor, polybenzimidazole (PBI-BuI), in the inner cavity as well as on the outer walls of the CNF, followed by a high temperature treatment. PBI-BuI incorporation along the inner and outer surface of the CNF was accomplished by synthesizing a low molecular weight polymer by tuning the synthetic parameters. The solution concentration of the PBI-BuI is also varied to facilitate its entry into the CNF by capillary action. The high temperature treatment (700-1000 degrees C) of the resulting CNF-PBI material decomposes the polymer and induces N-doping along the inner and outer surfaces of the CNF. The initial PBI-BuI content and the annealing temperature are also systematically varied to choose the right combination of starting precursors and heat-treatment conditions. Detailed X-ray photoelectron spectroscopy analysis of the samples shows that pyridinic-type nitrogen is the major component in all the samples. Electrochemical characterizations of this material using cyclic voltammetry, rotating disc electrode studies and durability analysis demonstrated that this material can act as a metal-free oxygen reduction electrocatalyst with improved oxygen reduction kinetics and stability. It is also revealed that the onset potential, limiting current density, number of transferred electrons, etc. have a strong dependence on the annealing temperature.

}, issn = {0959-9428}, doi = {10.1039/c2jm35033e}, author = {Balan, Beena K. and Manissery, Aiswarya Padinhare and Chaudhari, Harshal D. and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article { ISI:000303366000001, title = {Polymorphs, salts, and cocrystals: what{\textquoteright}s in a name?}, journal = {Crystal Growth \& Design}, volume = {12}, number = {5}, year = {2012}, month = {MAY}, pages = {2147-2152}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The December 2011 release of a draft United States Food and Drug Administration (FDA) guidance concerning regulatory classification of pharmaceutical cocrystals of active pharmaceutical ingredients (APIs) addressed two matters of topical interest to the crystal engineering and pharmaceutical science communities: (1) a proposed definition of cocrystals; (2) a proposed classification of pharmaceutical cocrystals as dissociable {\textquoteleft}{\textquoteleft}API-excipient{\textquoteright}{\textquoteright} molecular complexes. The Indo U.S. Bilateral Meeting sponsored by the Indo-U.S. Science and Technology Forum titled The Evolving Role of Solid State Chemistry in Pharmaceutical Science was held in Manesar near Delhi, India, from February 2-4, 2012. A session of the meeting was devoted to discussion of the FDA guidance draft. The debate generated strong consensus on the need to define cocrystals more broadly and to classify them like salts. It was also concluded that the diversity of API crystal forms makes it difficult to classify solid forms into three categories that are mutually exclusive. This perspective summarizes the discussion in the Indo-U.S. Bilateral Meeting and includes contributions from researchers who were not participants in the meeting.

}, issn = {1528-7483}, doi = {10.1021/cg3002948}, author = {Aitipamula, Srinivasulu and Banerjee, Rahul and Bansal, Arvind K. and Biradha, Kumar and Cheney, Miranda L. and Choudhury, Angshuman Roy and Desiraju, Gautam R. and Dikundwar, Amol G. and Dubey, Ritesh and Duggirala, Nagakiran and Ghogale, Preetam P. and Ghosh, Soumyajit and Goswami, Pramod Kumar and Goud, N. Rajesh and Jetti, Ram R. K. R. and Karpinski, Piotr and Kaushik, Poonam and Kumar, Dinesh and Kumar, Vineet and Moulton, Brian and Mukherjee, Arijit and Mukherjee, Gargi and Myerson, Allan S. and Puri, Vibha and Ramanan, Arunachalam and Rajamannar, T. and Reddy, C. Malla and Rodriguez-Hornedo, Nair and Rogers, Robin D. and Row, T. N. Guru and Sanphui, Palash and Shan, Ning and Shete, Ganesh and Singh, Amit and Sun, Changquan C. and Swift, Jennifer A. and Thaimattam, Ram and Thakur, Tejender S. and Thaper, Rajesh Kumar and Thomas, Sajesh P. and Tothadi, Srinu and Vangala, Venu R. and Variankaval, Narayan and Vishweshwar, Peddy and Weyna, David R. and Zaworotko, Michael J.} } @article { ISI:000306942300059, title = {Polymorphs, salts and cocrystals: what{\textquoteright}s in a name? (vol 12, pg 2147, 2012)}, journal = {Crystal Growth \& Design}, volume = {12}, number = {8}, year = {2012}, month = {AUG}, pages = {4290-4291}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, issn = {1528-7483}, doi = {10.1021/cg300704b}, author = {Aitipamula, Srinivasulu and Banerjee, Rahul and Bansal, Arvind K. and Biradha, Kumar and Cheney, Miranda L. and Choudhury, Angshuman Roy and Desiraju, Gautam R. and Dikundwar, Amol G. and Dubey, Ritesh and Duggirala, Nagakiran and Ghogale, Preetam P. and Ghosh, Soumyajit and Goswami, Pramod Kumar and Goud, N. Rajesh and Jetti, Ram R. K. R. and Karpinski, Piotr and Kaushik, Poonam and Kumar, Dinesh and Kumar, Vineet and Moulton, Brian and Mukherjee, Arijit and Mukherjee, Gargi and Myerson, Allan S. and Puri, Vibha and Ramanan, Arunachalam and Rajamannar, T. and Reddy, C. Malla and Rodriguez-Hornedo, Nair and Rogers, Robin D. and Row, T. N. Guru and Sanphui, Palash and Shan, Ning and Shete, Ganesh and Singh, Amit and Sun, Changquan C. and Swift, Jennifer A. and Thaimattam, Ram and Thakur, Tejender S. and Thaper, Rajesh Kumar and Thomas, Sajesh P. and Tothadi, Srinu and Vangala, Venu R. and Vishweshwar, Peddy and Weyna, David R. and Zaworotko, Michael J.} } @article { ISI:000311522500055, title = {Porous ZnO nanorod for targeted delivery of doxorubicin: in vitro and in vivo response for therapeutic applications}, journal = {Journal of Materials Chemistry}, volume = {22}, number = {45}, year = {2012}, month = {DEC}, pages = {24145-24154}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Cancer cell specific targeted delivery (TDD) by porous nanocarrier is on a high role. Here in a simple route for the synthesis of porous ZnO nanorods (ZnO) has been demonstrated. ZnO expressed very high surface area of 305.14 m(2) g(-1) (S-BET) and uniformly distributed pores of 5 nm. In continuation ZnO has been fabricated with 3-aminophosphonic acid followed by folic acid to yield folate conjugated porous ZnO nanorod (ZnO-FA). High surface area, uniformly distributed pores on its surface make the nanocarrier suitable for high drug loading (88\%) of the anticancer drug doxorubicin (DOX). A pH triggered drug release was observed with minimum release in pathophysical conditions. In vitro efficacy of DOX loaded ZnO-FA (ZnO-FA-DOX) has been evaluated against breast cancer cells MDA-MB-231, which is not possible alone by DOX or ZnO-FA. Targeted scaffold with pendant -NH2 group has been covalently bonded with fluorescent dye (RITC) for cellular uptake and imaging studies in MDA-MB-231 cells; the possible pathway for cancer regression has also been evaluated. Even in vivo acute and intravenous toxicological evaluation on murine model system complemented biocompatibility of ZnO-FA in TDD. All together we have collaged a template free synthesis of porous ZnO nanorod, successful targeting on to cancer cells, high drug loading, pH triggered drug release, in vitro efficacy of ZnO-FA-DOX against MDA-MB-231 cells and in vivo compatibility as well. We envisioned the future prospect of porous ZnO nanostructures in TDD.

}, issn = {0959-9428}, doi = {10.1039/c2jm35013k}, author = {Mitra, Shouvik and Subia, B. and Patra, Prasun and Chandra, Sourov and Debnath, Nitai and Das, Sumistha and Banerjee, Rahul and Kundu, Subhas C. and Pramanik, Panchanan and Goswami, Arunava} } @article { ISI:000298860100004, title = {Proteomic analysis of glycated proteins from streptozotocin-induced diabetic rat kidney}, journal = {Molecular Biotechnology}, volume = {50}, number = {1}, year = {2012}, month = {JAN}, pages = {28-38}, publisher = {HUMANA PRESS INC}, address = {999 RIVERVIEW DRIVE SUITE 208, TOTOWA, NJ 07512 USA}, abstract = {

Glycation of proteins leading to formation of advanced glycation end products (AGEs) has been considered as one of the important causes of diabetic nephropathy. Therefore, in this study, glycated proteins were detected by anti-AGE antibodies from kidney of streptozotocin-induced diabetic rat showing nephropathic symptoms, by using two dimensional electrophoresis and western blot analysis. These glycated proteins were identified and characterized by using combination of peptide mass finger printing and tandem mass spectrometric approaches. Glycated proteins identified included proteins from metabolic pathways, oxidative stress, cell signaling, and transport. Several of the proteins modified by glycation were involved in glucose metabolism. The extent of glycation was higher in diabetes compared to control, in the glycated proteins that were common to both control and diabetic kidney. Two dimensional electrophoresis proteins profiling of glycated proteins suggest that four of the glycated proteins were significantly up regulated in diabetes.

}, keywords = {AGE, Diabetes, Glucose toxicity, Nephropathy, Post-translation modification}, issn = {1073-6085}, doi = {10.1007/s12033-011-9409-3}, author = {Chougale, Ashok D. and Bhat, Shweta P. and Bhujbal, Swapnil V. and Zambare, Mandar R. and Puntambekar, Shraddha and Somani, Rahul S. and Boppana, Ramanamurthy and Giri, Ashok P. and Kulkarni, Mahesh J.} } @article { ISI:000312148500013, title = {Rapid microwave synthesis of fluorescent hydrophobic carbon dots}, journal = {RSC Advances}, volume = {2}, number = {32}, year = {2012}, month = {OCT}, pages = {12129-12131}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Fluorescent hydrophobic carbon dots (HCDs) have been fabricated from a poloxamer by a simple microwave assisted process within a few minutes for the first time. Small and distinct spherical HCDs emitted bright blue and green fluorescent light depending upon the excitation wavelength and were dispersed easily in a wide variety of organic solvents. HCDs exhibited excellent water resistant behavior with a contact angle of similar to 122 degrees enforcing good hydrophobic character which will be quite useful in potential surface applications.

}, issn = {2046-2069}, doi = {10.1039/c2ra21048g}, author = {Mitra, Shouvik and Chandra, Sourov and Kundu, Tanay and Banerjee, Rahul and Pramanik, Panchanan and Goswami, Arunava} } @article {42504, title = {Ratiometric detection of Cr3+ and Hg2+ by a naphthalimide-rhodamine based fluorescent probe}, journal = {Inorganic Chemistry}, volume = {51}, year = {2012}, month = {JAN}, pages = {1769{\textendash}1777}, abstract = {

Newly synthesized rhodamine derivatives, L1 and L2, are found to bind specifically to Hg2+ or Cr3+ in presence of large excess of other competing ions with associated changes in their optical and fluorescence spectral behavior. These spectral changes are significant enough in the visible region of the spectrum and thus, allow the visual detection. For L1, the detection limit is even lower than the permissible [Cr3+] or [Hg2+] in drinking water as per standard U.S. EPA norms; while the receptor, L2 could be used as a ratiometric sensor for detection of Cr3+ and Hg2+ based on the resonance energy transfer (RET) process involving the donor naphthalimide and the acceptor Cr3+/Hg2+-bound xanthene fragment. Studies reveal that these two reagents could be used for recognition and sensing of Hg2+/Cr3+. Further, confocal laser microscopic studies confirmed that the reagent L2 could also be used as an imaging probe for detection of uptake of these ions in A431 cells.

}, doi = {10.1021/ic202073q}, author = {Mahato, Prasenjit and Saha, Sukdeb and Suresh, E. and Liddo, Rosa Di and Parnigotto, Pier Paolo and Conconi, Maria Teresa and Kesharwani, Manoj K. and Ganguly, Bishwajit and Das, Amitava} } @article {42501, title = {Recognition of Hg 2+ and Cr 3+ in physiological conditions by a rhodamine derivative and its application as a reagent for cell-imaging studies}, journal = {Inorganic Chemistry}, volume = {51}, year = {2012}, month = {DEC}, pages = {336{\textendash}345}, abstract = {

A new rhodamine-based receptor, derivatized with an additional fluorophore (quinoline), was synthesized for selective recognition of Hg2+ and Cr3+ in an acetonitrile/HEPES buffer medium of pH 7.3. This reagent could be used as a dual probe and allowed detection of these two ions by monitoring changes in absorption and the fluorescence spectral pattern. In both instances, the extent of the changes was significant enough to allow visual detection. More importantly, the receptor molecule could be used as an imaging reagent for detection of Hg2+ and Cr3+ uptake in live human cancer cells (MCF7) using laser confocal microscopic studies. Unlike Hg(ClO4)2 or Hg(NO3)2 salts, HgCl2 or HgI2 failed to induce any visually detectable change in color or fluorescence upon interaction with L1 under identical experimental conditions. Presumably, the higher covalent nature of HgII in HgCl2 or HgI2 accounts for its lower acidity and its inability to open up the spirolactam ring of the reagent L1. The issue has been addressed on the basis of the single-crystal X-ray structures of L1{\textperiodcentered}HgX2 (X{\textendash} = Cl{\textendash} or I{\textendash}) and results from other spectral studies.

}, doi = {10.1021/ic2017243}, author = {Saha, Sukdeb and Mahato, Prasenjit and Reddy, Upendar G. and Suresh, E. and Chakrabarty, Arindam and Baidya, Mithu and Ghosh, Sudip K. and Das, Amitava} } @article { ISI:000309568700049, title = {Reply to comment on {\textquoteleft}{\textquoteleft}Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles{\textquoteright}{\textquoteright}, by C. Noubactep}, journal = {Journal of Hazardous Materials}, volume = {235}, year = {2012}, month = {OCT}, pages = {392-393}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2011.04.015}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article {42503, title = {Rhodamine-alginate conjugate as self-indicating gel beads for efficient detection and scavenging of Hg 2+ and Cr 3+ in aqueous media}, journal = {Chemical Communications}, volume = {48}, year = {2012}, month = {NOV}, pages = {1659-1661}, abstract = {

Effective extraction of Hg2+ and Cr3+ ions from aqueous media by novel rhodamine{\textendash}alginate polymer-based highly fluorogenic, as well as colorimetric, chemosensor beads.

}, doi = {10.1039/C1CC16554B}, author = {Saha, Sukdeb and Chhatbar, Mahesh U. and Mahato, Prasenjit and Praveen, L. and Siddhanta, A. K. and Das, Amitava} } @article { ISI:000310744400011, title = {Selective oxidation of nonrefractory and refractory sulfides by cyclopentadienyl molybdenum acetylide complexes as efficient catalysts}, journal = {Catalysis Letters}, volume = {142}, number = {11}, year = {2012}, month = {NOV}, pages = {1352-1360}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

{The synthesis and catalytic properties of molybdenum acetylide complexes CpMo(CO)(3)(-C CR)

}, keywords = {Homogeneous catalysis, Molybdenum acetylide, Oxo-peroxo species, Refractory sulfide oxidation}, issn = {1011-372X}, doi = {10.1007/s10562-012-0898-x}, author = {Chandgude, Macchindra G. and Biradar, Ankush V. and Kotbagi, Trupti V. and Puranik, Vedavati G. and Dongare, Mohan K. and Shubhangi B. Umbarkar} } @article { ISI:000301955900026, title = {Selective recognition of fluoride and acetate by a newly designed ruthenium framework: experimental and theoretical investigations}, journal = {Dalton Transactions}, volume = {41}, number = {15}, year = {2012}, month = {FEB}, pages = {4484-4496}, type = {Article}, abstract = {

{An effective anion sensor, [Ru-II(bpy)(2)(H2L-)](+) (1(+)), based on a redox and photoactive {Ru-II(bpy)(2)} moiety and a new ligand (H3L = 5-(1H-benzo[d]imidazol-2-yl)-1H-imidazole-4-carboxylic acid), has been developed for selective recognition of fluoride (F-) and acetate (OAc-) ions. Crystal structures of the free ligand, H3L and [1](ClO4) reveal the existence of strong intramolecular and intermolecular hydrogen bonding interactions. The structure of [1](ClO4) shows that the benzimidazole N-H of H2L- is hydrogen bonded with the pendant carboxylate oxygen while the imidazole N-H remains free for possible hydrogen bonding interaction with the anions. The potential anion sensing features of 1(+) have been studied by different experimental and theoretical (DFT) investigations using a wide variety of anions, such as F-, Cl-, Br-, I-, HSO4-, H2PO4-, OAc- and SCN-. Cyclic voltammetry and differential pulse voltammetry established that 1(+) is an excellent electrochemical sensor for the selective recognition kof F- and OAc- anions. 1(+) is also found to be a selective colorimetric sensor for F- or OAc- anions where the MLCT band of the receptor at 498 nm is red shifted to 538 nm in the presence of one equivalent of F- or OAc- with a distinct change in colour from reddish-orange to pink. The binding constant between 1(+) and F- or OAc- has been determined to be logK = 7.61 or 7.88, respectively, based on spectrophotometric titration in CH3CN. The quenching of the emission band of 1(+) at 716 nm (lambda(ex) = 440 nm

}, doi = {10.1039/c2dt12126c}, author = {Kundu, Tanaya and Chowdhury, Abhishek Dutta and De, Dipanwita and Mobin, Shaikh M. and Puranik, Vedavati G. and Datta, Anindya and Lahiri, Goutam Kumar} } @proceedings {43270, title = {Self{\textendash}assembled histidine acid phosphate nanocapsules as templates for multifunctional hollow platinum nanospheres in ionic liquid [BMIM][BF 4 ] for drug delivery}, year = {2012}, month = {JAN}, abstract = {

During the past few decades, the design and fabrication of nano drug delivery vehicle has received considerable attention for incorporating multi-functionality, emphasizing transportation of anticancer drugs to tumour sites. Protein-based nanoparticles hold significant promise in the development of anticancer drug delivery systems since they have remarkable superiority in biocompatibility, biodegradability and natural metabolism in physiologic systems. Ionic liquids (ILs) are a class of solvents that are composed solely of ions (ILs {\textendash} commonly referred as room temperature molten salts or room temperature ionic liquids). They have recently emerged as green solvents or green reaction media, because of their reported unique physico-chemical properties. We report for the first time the controlled self-assembly of Histidine Acid phosphatase (HAP) enzyme in the IL 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF 4 ], leading to the formation of HAP nanocapsules as template for synthesis of platinum nanospheres. These HAP nano-containers were loaded with an anticancer drug curcumin. We further demonstrated in vitro drug release and synergistic anticancer effect of these systems on three different cell lines viz. hepatocellular carcinoma (HepG2), breast cancer (MCF-7) and human acute monocytes (THP-1). The present work can extend our theoretical understanding on nano-bio interfacial molecular self assembly and will facilitate the motivated insights of inorganic/organic hybrid nano-materials/ nano-particles/ nano-objects and ionic liquids based multi functional drug delivery vehicles with synergistic combination chemotherapy for potential application in tumor targeting. INTRODUCTION During the past few decades, the design and fabrication of drug delivery vehicle has received considerable attention for incorporating multi-functionality emphasizing transportation of anticancer drugs to tumour sites. These nano drug delivery vehicles have many advantages including prolonged circulation time of the drugs (Duncan, 2003, Kiick, 2007) , improved drug targeting and solubility (Duncan, 2003, Kiick, 2007), higher payloads (Duncan, 2003) and controlled release of the therapeutics into the blood stream or the targeted tumour tissues (Uhrich et al. 1999, Duncan, 2003).

}, author = {Soni, Sarvesh Kumar and Sarkar, Sampa and Sarkar, Dhiman and Coloe, Peter J. and Bhargava, Suresh Kumar and Bansal, Vipul} } @article {42551, title = {Size-controlled flow synthesis of gold nanoparticles using a segmented flow microfluidic platform}, journal = {Langmuir}, volume = {28}, year = {2012}, month = {MAY}, pages = {7007-7013}, abstract = {

Segmented flow is often used in the synthesis of nanomaterials to achieve narrow particle size distribution. The narrowness of the distribution is commonly attributed to the reduced dispersion associated with segmented flows. On the basis of the analysis of flow fields and the resulting particle size distribution, we demonstrate that it is the slip velocity between the two fluids and internal mixing in the continuous-phase slugs that govern the nature of the particle size distribution. The reduction in the axial dispersion has less impact on particle growth and hence on the particle size distribution. Synthesis of gold nanoparticles from HAuCl4 with rapid reduction by NaBH4 serves as a model system. Rapid reduction yields gold nuclei, which grow by agglomeration, and it is controlled by the interaction of the nuclei with local flow. Thus, the difference in the physical properties of the two phases and the inlet flow rates ultimately control the particle growth. Hence, a careful choice of continuous and dispersed phases is necessary to control the nanoparticle size and size distribution.

}, doi = {10.1021/la205131e}, author = {Cabeza, Victor Sebastian and Kuhn, Simon and Kulkarni, Amol A. and Jensen, Klavs F.} } @article { ISI:000302535600002, title = {Solvent-free one-pot synthesis of sulfonephthaleins from saccharin and phenols}, journal = {Synthetic Communications}, volume = {42}, number = {8}, year = {2012}, month = {OCT}, pages = {1101-1107}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Sulfonephthaleins can be synthesized in a single pot from saccharin and phenol via the in situ formation of 2-sulfobenzoic anhydride, followed by its reaction with phenol using H2SO4 as the condensing agent, in the absence of any solvent. This solvent-free synthesis is more economical and environmentally benign.

}, keywords = {H2SO4, Phenols, saccharin, sulfonephthalein}, issn = {0039-7911}, doi = {10.1080/00397911.2010.535946}, author = {Tillu, V. H. and Dumbre, Deepa K. and Borate, Hanumant B. and Wakharkar, R. D. and Choudhary, Vasant R.} } @article { ISI:000308345800010, title = {Solvent-free oxidation of aldehydes to acids by TBHP using environmental-friendly -exchanged Mg-Al hydrotalcite catalyst}, journal = {Journal of Chemical Sciences}, volume = {124}, number = {4}, year = {2012}, month = {JUL}, pages = {835-839}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A number of hydrotalcite (Mg-Al, Mn-Al, Co-Al, Ni-Al, Mg-Fe, Mg-Cr and Cu-Al) catalysts, with or without MnO-exchange, were evaluated for their performance in the solvent-free oxidation of benzaldehyde to benzoic acid by tert-butyl hydroperoxide under reflux in the absence of any solvent. The MnO-exchanged Mg-Al-hydrotalcite (Mg/Al = 10) showed high activity in the oxidation of different aromatic and aliphatic aldehydes to their corresponding acids and also showed excellent reusability in the oxidation process which is environmental-friendly.

}, keywords = {acid, Aldehyde, MnO4-1-exchanged Mg-Al-hydrotalcite catalyst, Oxidation, TBHP}, issn = {0974-3626}, doi = {10.1007/s12039-012-0268-7}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Narkhede, Vijay S.} } @article { ISI:000301509500005, title = {Structural, dynamical, and thermodynamical properties of carbon nanotube polycarbonate composites: a molecular dynamics study}, journal = {Journal of Physical Chemistry B}, volume = {116}, number = {10}, year = {2012}, month = {MAR}, pages = {3083-3091}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

All-atom molecular dynamics simulations are performed on pure monomer and trimer of polycarbonate and their mixtures with different molecular weight percentages of embedded single walled carbon nanotubes at different temperatures to study the structural and dynamical properties of the composite system. The diffusion behaviors of monomer, trimer of polycarbonate and carbon nanotubes in composite matrices are investigated and compared with pure matrices in details. Both structural and dynamical properties indicate the weak interaction between the nanotubes and matrix molecules. The high tendency of nanotubes to form bundles is observed during simulation. The bundle formation free energy has been calculated from the potential of mean force calculations. The mechanism and energetics of bundle formation is explored in the atomistic scale. The formation of the carbon nanotube bundle is a favorable process in the oligomeric polycarbonate matrix.

}, issn = {1520-6106}, doi = {10.1021/jp212220m}, author = {Chakraborty, Souvik and Roy, Sudip} } @article { ISI:000309382100040, title = {Synthesis of glycidol from glycerol and dimethyl carbonate using ionic liquid as a catalyst}, journal = {Catalysis Communications}, volume = {27}, year = {2012}, month = {OCT}, pages = {184-188}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Transesterification of dimethyl carbonate with glycerol has been investigated using various ionic liquids as catalysts. Synthesis of glycidol with high selectivity (78\%) has been achieved using tetramethylammonium hydroxide ([TMA][OH]) as a catalyst at 80 degrees C. Effect of various reaction conditions on the activity and selectivity was investigated and catalyst concentration had a significant influence on conversion as well as selectivity to glycidol. Activity as well as selectivity of the catalyst decreased significantly with increase in moisture content. Recycle experiment indicated slight drop in glycerol conversion and selectivity to glycidol because of dilution of reaction mixture and also the presence of products from the initial experiment. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Glycerol carbonate, Glycidol, Ionic liquid, Transesterification of glycerol}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.07.003}, author = {Gade, Swapna M. and Munshi, Mudassir K. and Chherawalla, Batul M. and Rane, Vilas H. and Kelkar, Ashutosh A.} } @article { ISI:000310947900007, title = {Synthesis of isomeric corniculatolides}, journal = {Tetrahedron Letters}, volume = {53}, number = {47}, year = {2012}, month = {NOV}, pages = {6343-6346}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Synthesis of three natural macrolides 11-O-methylcorniculatolide A, 11-O-methylisocorniculatolide A and isocorniculatolide A is reported using a simple, straight forward and high-yielding route. The present synthesis confirms the assigned molecular structures and provides an access to sufficient quantities of the natural products for the biological evaluation. In addition, we have determined the anti-TB potential of the three natural compounds using Alamar-Blue assay (H(37)Rv) and found no significant inhibitory activity at 100 mu g/ml. Excellent yields, short sequence and useful SAR information are the highlights of the present work. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Diaryl ether, Isocorniculatolide, Macrocyclization, Mitsunobu reaction, Total synthesis}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2012.09.010}, author = {Raut, Gajanan N. and Chakraborty, Kasturi and Verma, Priyanka and Gokhale, Rajesh S. and Reddy, D. Srinivasa} } @article {43253, title = {TDR Targets: a chemogenomics resource for neglected diseases}, journal = {Nucleic Acids Research}, volume = {40}, year = {2012}, month = {JAN}, pages = {D1118-D1127}, abstract = {The TDR Targets Database (http://tdrtargets.org) has been designed and developed as an online resource to facilitate the rapid identification and prioritization of molecular targets for drug development, focusing on pathogens responsible for neglected human diseases. The database integrates pathogen specific genomic information with functional data (e.g. expression, phylogeny, essentiality) for genes collected from various sources, including literature curation. This information can be browsed and queried using an extensive web interface with functionalities for combining, saving, exporting and sharing the query results. Target genes can be ranked and prioritized using numerical weights assigned to the criteria used for querying. In this report we describe recent updates to the TDR Targets database, including the addition of new genomes (specifically helminths), and integration of chemical structure, property and bioactivity information for biological ligands, drugs and inhibitors and cheminformatic tools for querying and visualizing these chemical data. These changes greatly facilitate exploration of linkages (both known and predicted) between genes and small molecules, yielding insight into whether particular proteins may be druggable, effectively allowing the navigation of chemical space in a genomics context.}, doi = {10.1093/nar/gkr1053}, author = {Magarinos, Maria P. and Carmona, Santiago J. and Crowther, Gregory J. and Ralph, Stuart A. and Roos, David S. and Shanmugam, Dhanasekaran and Van Voorhis, Wesley C.} } @article { ISI:000313024300028, title = {Thermally decomposed Cu-Fe-hydrotalcite. a novel highly active catalyst for o-arylation of naphthol and phenols by aryl halides}, journal = {Catalysis Communications}, volume = {29}, year = {2012}, month = {DEC}, pages = {132-136}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel, efficient and environmentally benign method has been reported for the synthesis of diaryl ethers by the o-arylation of napthol or phenols with aryl halides in dimethylformamide (as a solvent) under reflux, using a novel heterogeneous catalyst (having redox properties), obtained from thermal decomposition of Cu-Fe at 600 degrees C in the absence of externally added base. The catalyst comprises Cu(II) and Fe(III) species (oxides and hydroxides), which are uniformly distributed during the catalyst formation. The catalyst can be easily separated from the reaction mixture, simply by filtration and reused several times without a significant loss of its activity. (C) 2012 Elsevier B.V. All rights reserved.

}, keywords = {Aryl halides, C-O cross coupling reaction, Cu-Fe-hydrotalcite, Naphthol, o-Arylation, Phenols}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.09.024}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Yadav, P. N. and Bhargava, Suresh Kumar} } @article { ISI:000307308000020, title = {Transesterification of diethyl oxalate with phenol over sol-gel MoO3/TiO2 catalysts}, journal = {Chemsuschem}, volume = {5}, number = {8}, year = {2012}, month = {JUL}, pages = {1467-1473}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The transesterification of diethyl oxalate (DEO) with phenol to form diphenyl oxalate (DPO) has been carried out in the liquid phase over very efficient MoO3/TiO2 solid-acid solgel catalysts. A selectivity of 100?\% with a remarkable maximum yield of 88?\% were obtained, which opens the route to downstream phosgene-free processes for the synthesis of polycarbonates. Interpretation of the results of various acidity measurements (NH3 and pyridine desorption, methanol oxidation as a probe reaction) allowed us to identify the catalytic sites as Lewis acid sites.

}, keywords = {heterogeneous catalysis, Lewis acids, Oxidation, sol-gel processes, transesterification}, issn = {1864-5631}, doi = {10.1002/cssc.201100802}, author = {Kotbagi, Trupti and Duy Luan Nguyen and Lancelot, Christine and Lamonier, Carole and Thavornprasert, Kaew-Arpha and Zhu Wenli and Capron, Mickael and Jalowiecki-Duhamel, Louise and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck} } @article { ISI:000300911400014, title = {Transport of inorganic acids through polybenzimidazole (PBI) based membranes by chemo-dialysis}, journal = {Desalination and Water Treatment}, volume = {38}, number = {1-3}, year = {2012}, month = {JAN}, pages = {96-103}, publisher = {DESALINATION PUBL}, address = {36 WALCOTT VALLEY DRIVE,, HOPKINTON, MA 01748 USA}, abstract = {

A process of chemo-dialysis involving poly(benzimidazole) (PBI) as a chemically active membrane material is proposed for the transport of inorganic acids. These membranes possessing basic nature selectively bind acid molecules present in the feed solution due to acid-base interactions. They are transported across the membrane by concentration gradient as the driving force. The transported acid molecules are stripped away from other side of the membrane surface by a suitable stripping agent or water. Effects of nature of feed acid (pK(a), molecular size), its concentration in the feed solution and the nature of stripping agent (base or water) on acid transport properties are presented. Membranes showed appreciable transport rates for three acids, viz., H2SO4, HCl and HNO3. The fluxes for different acids varied from 16.1 to 140.7 g/m(2) h under different operating conditions. Most significantly, there was no transport of non-acidic solutes such as NaCl or glucose. This could be made possible since these solutes neither get sorbed in the membrane matrix, nor does the membrane exhibit any porosity for the transport to occur through pores. This resulted in practically infinite selectivity of transported acid over the non-acidic solutes. Use of water as the stripping agent allows recycling of the acid, making the process economically attractive. Moreover, possible recovery of acid and its reuse eliminated the requirement of acid neutralization and disposal; which is a routine practice followed today. Thus, this process of chemo-dialysis is economically attractive and environmentally benign.

}, keywords = {Acid transport, Chemical interaction, Chemo-dialysis, Inorganic acids, Membrane, Polybenzimidazole}, issn = {1944-3994}, doi = {10.5004/dwt.2012.2318}, author = {Chendake, Yogesh J. and Kharul, Ulhas K.} } @article { ISI:000307601300015, title = {Very practical and selective method for PMB protection of alcohols}, journal = {Tetrahedron Letters}, volume = {53}, number = {35}, year = {2012}, month = {AUG}, pages = {4683-4686}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A very simple, practical and efficient one-step heterogeneous protocol for the PMB protection of alcohols using Amberlyst-15 has been developed. The stability and hazard issues regarding PMBCI and PMBBr are totally avoided by directly using anisyl alcohol for the protection. Alcohols are protected in very good yields. The selective mono-PMB protection of diols as well as di-PMB protection of diols was achieved in good yields, along with the demonstration of recyclability of the catalyst. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {4-Methoxybenzyl alcohol, 4-Methoxybenzyl protection, Amberlyst-15, Di-PMB protection, Mono-PMB protection}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2012.06.084}, author = {Chavan, Subhash P. and Harale, Kishor R.} } @article { ISI:000324309600011, title = {Basic structural motif and major biophysical properties of Amyloid-beta are encoded in the fragment 18-35}, journal = {Chemical Physics}, volume = {422}, number = {SI}, year = {2013}, month = {AUG}, pages = {80-87}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Aggregation and misfolding of the amyloid beta (A beta) peptide is thought to initiate Alzheimer{\textquoteright}s disease (AD). Here we study the role played by its central segment (A beta(18-35)) in determining these properties. A beta(18-35) has a solubility of 18 mu M. The soluble fraction consists mainly of small oligomers, which have mixed beta-sheet and random coil structures. The monomer is mostly a random coil with some residual compactness. Aggregated A beta(18-35) forms fibrils of width 3.0 +/- 0.7 nm, which is consistent with a hairpin shape. Each of these properties has a close similarity to A beta(40). Remarkably, solid state NMR indicates that the fibrils also retain the secondary structure and tertiary contacts of A beta(40). This is the shortest fragment of A beta reported so far which preserves its fibrillar architecture, including the hairpin turn, as well as its solution phase conformational properties. Residues 18-35 should therefore be a key target of AD therapeutics. (C) 2013 Published by Elsevier B. V.

}, keywords = {Alzheimer{\textquoteright}s disease, Fluorescence correlation spectroscopy, Protein aggregation, Solid-state NMR}, issn = {0301-0104}, doi = {10.1016/j.chemphys.2013.01.010}, author = {Chandrakesan, Muralidharan and Sarkar, Bidyut and Mithu, Venus Singh and Rajiv M. Abhyankar and Bhowmik, Debanjan and Nag, Suman and Sahoo, Bankanidhi and Shah, Riddhi and Gurav, Sushma and Banerjee, Raja and Dandekar, Sucheta and Jose, Jaya C. and Sengupta, Neelanjana and Madhu, Perunthiruthy K. and Maiti, Sudipta} } @article { ISI:000321965300043, title = {Biosynthesis of antinutritional alkaloids in solanaceous crops is mediated by clustered genes}, journal = {Science}, volume = {341}, number = {6142}, year = {2013}, month = {JUL}, pages = {175-179}, publisher = {AMER ASSOC ADVANCEMENT SCIENCE}, address = {1200 NEW YORK AVE, NW, WASHINGTON, DC 20005 USA}, abstract = {

Steroidal glycoalkaloids (SGAs) such as alpha-solanine found in solanaceous food plants-as, for example, potato-are antinutritional factors for humans. Comparative coexpression analysis between tomato and potato coupled with chemical profiling revealed an array of 10 genes that partake in SGA biosynthesis. We discovered that six of them exist as a cluster on chromosome 7, whereas an additional two are adjacent in a duplicated genomic region on chromosome 12. Following systematic functional analysis, we suggest a revised SGA biosynthetic pathway starting from cholesterol up to the tetrasaccharide moiety linked to the tomato SGA aglycone. Silencing GLYCOALKALOID METABOLISM 4 prevented accumulation of SGAs in potato tubers and tomato fruit. This may provide a means for removal of unsafe, antinutritional substances present in these widely used food crops.

}, issn = {0036-8075}, doi = {10.1126/science.1240230}, author = {Itkin, M. and Heinig, U. and Tzfadia, O. and Bhide, Amey J. and Shinde, B. and Cardenas, Pablo D. and Bocobza, S. E. and Unger, T. and Malitsky, Sergey and Finkers, R. and Tikunov, Y. and Bovy, A. and Chikate, Y. and Singh, P. and Rogachev, I. and Beekwilder, J. and Giri, Ashok P. and Aharoni, Asaph} } @article { ISI:000313812400048, title = {Carbon nanofiber-RuO2-poly(benzimidazole) ternary hybrids for improved supercapacitor performance}, journal = {RSC Advances}, volume = {3}, number = {7}, year = {2013}, month = {DEC}, pages = {2428-2436}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Carbon nanofiber-RuO2-poly(benzimidazole) ternary hybrid electrode material which integrates dual wall decoration and interfacial area tuning for supercapacitor applications has been devised based on a simple approach. This is achieved by decorating RuO2 nanoparticles of size ca. 2-3 nm along the inner and outer walls of a hollow carbon nanofiber (CNF) support (F-20RuO(2)). In the next step, a proton conducting polymer, phosphoric acid doped polybenzimidazole (PBI-BuI), interface is created along the inner and outer surfaces of this material. A 103\% increase in the specific capacitance is obtained for RuO2-PBI hybrid material as compared to that of F-20RuO(2) at the optimum level of the polymer wrapping. Apart from the high specific capacitance, the RuO2-PBI hybrid materials exhibit enhanced rate capability and excellent electrochemical stability of 98\% retention in the capacitance. Such a remarkably high activity can be primarily attributed to the efficient dispersion of active sites achieved by properly utilizing inner and outer surfaces of CNF. Apart from this, the facile routes for ion transport created as a result of PBI incorporation coupled with excellent interfacial contact between the RuO2 and the electrolyte resulting in the improved utilization of the active material also contribute to the improved activity. In addition to this, the synergistic effects of pseudocapacitive contribution from both the PBI-BuI and RuO2 also contribute to the redefined performance characteristics.

}, issn = {2046-2069}, doi = {10.1039/c2ra22776b}, author = {Balan, Beena K. and Chaudhari, Harshal D. and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article { ISI:000315069400009, title = {Catalytic activity of ZIF-8 in the synthesis of styrene carbonate from CO2 and styrene oxide}, journal = {Catalysis Communications}, volume = {32}, year = {2013}, month = {FEB}, pages = {36-40}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The catalytic activity of ZIF-8 in the synthesis of styrene carbonate from carbon dioxide and styrene oxide is presented. ZIF-8 crystals displayed catalytic activity even at temperatures as low as 50 degrees C, with styrene carbonate yields as high as similar to 54\% at 100 degrees C. In contrast to many prior-art catalysts, solvents or co-catalysts were not required. Pyridine and ammonia were used as probe molecules to estimate the type and density of acid sites in fresh and reused ZIF-8 catalysts. DRIFT spectroscopy of adsorbed pyridine revealed the presence of both Bronsted (B) and Lewis (L) acid sites. The B-sites have nearly vanished in the case of recycled ZIF-8 catalysts. The simultaneous presence of both the acid sites and the nitrogen basic moieties from the imidazole linker in ZIF-8 promoted the adsorption of the CO2 on the solid surface and its further conversion to the cyclic carbonate. The ZIF-8 catalysts could be recycled and reused without significant loss in catalytic activity. Published by Elsevier B.V.

}, keywords = {CO2 conversion, cyclic carbonates, Styrene carbonate, Zeolitic imidazolate frameworks, ZIF-8}, issn = {1566-7367}, doi = {10.1016/j.catcom.2012.12.003}, author = {Zhu, Minqi and Srinivas, Darbha and Bhogeswararao, Seemala and Ratnasamy, Paul and Carreon, Moises A.} } @article { ISI:000320024400001, title = {C-C Bond formation catalyzed by natural gelatin and collagen proteins}, journal = {Beilstein Journal of Organic Chemistry}, volume = {9}, year = {2013}, month = {JUN}, pages = {1111-1118}, publisher = {BEILSTEIN-INSTITUT}, address = {TRAKEHNER STRASSE 7-9, FRANKFURT AM MAIN, 60487, GERMANY}, abstract = {

The activity of gelatin and collagen proteins towards C-C bond formation via Henry (nitroaldol) reaction between aldehydes and nitroalkanes is demonstrated for the first time. Among other variables, protein source, physical state and chemical modification influence product yield and kinetics, affording the nitroaldol products in both aqueous and organic media under mild conditions. Significantly, the scale-up of the process between 4-nitrobenzaldehyde and nitromethane is successfully achieved at 1 g scale and in good yield. A comparative kinetic study with other biocatalysts shows an increase of the first-order rate constant in the order chitosan \< gelatin \< bovine serum albumin (BSA) \< collagen. The results of this study indicate that simple edible gelatin can promote C-C bond forming reactions under physiological conditions, which may have important implications from a metabolic perspective.

}, keywords = {biocatalysis, carbon-carbon bond formation, gelatin, Henry reaction, protein}, issn = {1860-5397}, doi = {10.3762/bjoc.9.123}, author = {Kuehbeck, Dennis and Dhar, Basab Bijayi and Schoen, Eva-Maria and Cativiela, Carlos and Gotor-Fernandez, Vicente and Diaz, David Diaz} } @article { ISI:000326122800047, title = {Characterization of conformation and interaction of gene delivery vector polyethylenimine with phospholipid bilayer at different protonation state}, journal = {Biomacromolecules}, volume = {14}, number = {10}, year = {2013}, month = {OCT}, pages = {3759-3768}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Polyethylenimine (PEI) is a pH sensitive polymer possessing stretched and coiled conformation at low and high pH, respectively. It is an efficient gene delivery agent. Thus, the interaction of PEI with the biomembrane is very crucial to understand the gene delivery mechanism. In this report, we have investigated the structural properties of PEI and bilayer due to the interaction of PEI with lipid molecules. PEI has coil structure at high pH while at low pH it is elongated. The neutral PEI chain predominately settles itself at the bilayer water interface. We do not find any disruption or pore formation on the bilayer due to interaction of neutral PEI chain. PEI at low pH gets elongated due to electrostatic interaction between charges of the protonated sites. This protonated PEI chain interacts with bilayer membrane, which leads to formation of water/ion channel through the membrane. We have analyzed the structure of the channel and water dynamics along the channel.

}, issn = {1525-7797}, doi = {10.1021/bm4011408}, author = {Choudhury, Chandan Kumar and Kumar, Abhinaw and Roy, Sudip} } @article { ISI:000325836600014, title = {Characterization of three novel isoprenyl diphosphate synthases from the terpenoid rich mango fruit}, journal = {Plant Physiology and Biochemistry}, volume = {71}, year = {2013}, month = {OCT}, pages = {121-131}, publisher = {ELSEVIER FRANCE-EDITIONS SCIENTIFIQUES MEDICALES ELSEVIER}, address = {23 RUE LINOIS, 75724 PARIS, FRANCE}, abstract = {

Mango (cv. Alphonso) is popular due to its highly attractive, terpenoid-rich flavor. Although Alphonso is clonally propagated, its fruit-flavor composition varies when plants are grown in different geo-climatic zones. Isoprenyl diphosphate synthases catalyze important branch-point reactions in terpenoid biosynthesis, providing precursors for common terpenoids such as volatile terpenes, sterols and carotenoids. Two geranyl diphosphate synthases and a farnesyl diphosphate synthase were isolated from Alphonso fruits, cloned for recombinant expression and found to produce the respective products. Although, one of the geranyl diphosphate synthases showed high sequence similarity to the geranylgeranyl diphosphate synthases, it did not exhibit geranylgeranyl diphosphate synthesizing activity. When modeled, this geranyl diphosphate synthase and farnesyl diphosphate synthase structures were found to be homologous with the reference structures, having all the catalytic side chains appropriately oriented. The optimum temperature for both the geranyl diphosphate synthases was 40 degrees C and that for farnesyl diphosphate synthase was 25 degrees C. This finding correlated well with the dominance of monoterpenes in comparison to sesquiterpenes in the fruits of Alphonso mango in which the mesocarp temperature is higher during ripening than development. The absence of activity of these enzymes with the divalent metal ion other than Mg2+ indicated their adaptation to the Mg2+ rich mesocarp. The typical expression pattern of these genes through the ripening stages of fruits from different cultivation localities depicting the highest transcript levels of these genes in the stage preceding the maximum terpene accumulation indicated the involvement of these genes in the biosynthesis of volatile terpenes. (C) 2013 Elsevier Masson SAS. All rights reserved.

}, keywords = {Alphonso, Flavor variation, Fruit, Isoprenyl diphosphate synthase, Mangifera indica, Terpene volatiles}, issn = {0981-9428}, doi = {10.1016/j.plaphy.2013.07.006}, author = {Kulkarni, Ram and Pandit, Sagar and Chidley, Hemangi G. and Nagel, Raimund and Schmidt, Axel and Gershenzon, Jonathan and Pujari, Keshav and Giri, Ashok P. and Gupta, Vidya} } @article { ISI:000328099400036, title = {Chemically stable multilayered covalent organic nanosheets from covalent organic frameworks via mechanical delamination}, journal = {Journal of the American Chemical Society}, volume = {135}, number = {47}, year = {2013}, month = {NOV}, pages = {17853-17861}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A series of five thermally and chemically stable functionalized covalent organic frameworks (COFs), namely, TpPa-NO2, TpPa-F-4, TpBD-(NO2)(2), TpBD-Me-2, and TpBD-(OMe)(2) were synthesized by employing the solvothermal aldehyde-amine Schiff base condensation reaction. In order to complete the series, previously reported TpPa-1, TpPa-2, and TpBD have also been synthesized, and altogether, eight COFs were fully characterized through powder X-ray diffraction (PXRD), Fourier transform IR (FT-IR) spectroscopy, C-13 solid-state NMR spectroscopy, and thermogravimetric analysis. These COFs are crystalline, permanently porous, and stable in boiling water, acid (9 N HCl), and base (3 N NaOH). The. synthesized COFs (all eight) were successfully delaminated using a simple, safe, and environmentally friendly mechanical grinding route to transform into covalent organic nanosheets (CONs) and were well characterized via transmission electron microscopy and atomic force microscopy. Further PXRD and FT-IR analyses confirm that these CONs retain their structural integrity throughout the delamination process and also remain stable in aqueous, acidic, and basic media like the parent COFs. These exfoliated CONs have graphene-like layered morphology (delaminated layers), unlike the COFs from which they were synthesized.

}, issn = {0002-7863}, doi = {10.1021/ja408121p}, author = {Chandra, Suman and Kandambeth, Sharath and Biswal, Bishnu P. and Lukose, Binit and Kunjir, Shrikant M. and Chaudhary, Minakshi V. and BabaRao, Ravichandar and Heine, Thomas and Banerjee, Rahul} } @article { ISI:000317204600005, title = {Chitin synthase inhibitors as antifungal agents}, journal = {Mini-Reviews in Medicinal Chemistry}, volume = {13}, number = {2}, year = {2013}, month = {FEB}, pages = {222-236}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Increased risk of fungal diseases in immunocompromised patients, emerging fungal pathogens, limited repertoire of antifungal drugs and resistance development against the drugs demands for development of new and effective antifungal agents. With greater knowledge of fungal metabolism efforts are being made to inhibit specific enzymes involved in different biochemical pathways for the development of antifungal drugs. Chitin synthase is one such promising target as it is absent in plants and mammals. Nikkomycin Z, a chitin synthase inhibitor is under clinical development. Chitin synthesis in fungi, chitin synthase as a target for antifungal agent development, different chitin synthase inhibitors isolated from natural sources, randomly synthesized and modified from nikkomycin and polyoxin are discussed in this review.

}, keywords = {Antifungal agents, Chitin synthase, Chitin synthase inhibitors, Nikkomycin, Peptidyl nucleoside antibiotics, Polyoxin}, issn = {1389-5575}, author = {Chaudhary, Preeti M. and Tupe, Santosh G. and Deshpande, Mukund V.} } @article { ISI:000322949600001, title = {Chitinolytic enzymes: an appraisal as a product of commercial potential}, journal = {Biotechnology Progress}, volume = {29}, number = {4}, year = {2013}, month = {JUL}, pages = {833-846}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Chitin, its deacetylated form, chitosan and chitinolytic enzymes viz. endo-chitinase, N-acetylglucosaminidase, chitosanase, chitin deacetylase (CDA) are gaining importance for their biotechnological applications. Presently, chitin degrading enzymes constitute high-cost low-volume products in human health care and associated research. Indeed chitinases and CDA-chitosanase complex possesss tremendous potential in agriculture to control plant pathogenic fungi and insects. The success in exploring chitinases especially for agriculture, i.e. as a high-volume low-cost product, depends on the availability of highly active preparations with a reasonable cost. Therefore, a reconsideration in terms of understanding the roles of chitinolytic enzymes in applications, e.g. host-pathogen interaction for biocontrol, different mechanisms of chitin degradation, and identification of new enzymes with varying specificities, may make them more useful in a variety of commercial processes in the near future. The possible issues and challenges encountered in the translation of proof of concept into a commercial product will be appraised in this review. (c) 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:833-846, 2013

}, keywords = {chitin deacetylase, chitinase, chitosanase, high-cost low-volume product, high-volume low-cost product}, issn = {8756-7938}, doi = {10.1002/btpr.1732}, author = {Chavan, S. B. and Deshpande, Mukund V.} } @article { ISI:000312944900011, title = {Controlled synthesis of aligned Bi2S3 nanowires, sharp apex nanowires and nanobelts with its morphology dependent field emission investigations}, journal = {Crystengcomm}, volume = {15}, number = {5}, year = {2013}, month = {NOV}, pages = {890-896}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Well-aligned ultra-long Bi2S3 nanowire arrays with three kinds of apex morphology - abruptly sharpened apex, thin belt and flat - have been systematically fabricated on tungsten (W) foil by a facile hydrothermal method. The structural and morphological studies reveal formation of distinct tip morphologies, possessing high aspect ratio, single crystalline nature and growth along the orthorhombic [001] axis. A plausible growth mechanism has been proposed on the basis of observed experimental results. The field emission properties of Bi2S3 nanowires and sharp apex Bi2S3 nanowires are investigated. From the field emission studies, the values of the turn-on field, required to draw emission current density of similar to 0.1 mu A cm(-2), are observed to be similar to 2.01 and 1.21 V mu m(-1) for nanowires and sharp apex nanowires, respectively. Furthermore, ultra-long Bi2S3 nanowires are also grown on the W microtip (brush-like) from which very high emission current density similar to 11 mA cm(-2) has been drawn. These results are helpful for the design, fabrication and optimization of integrated field emitters using 1D nanostructures as cold cathode material.

}, issn = {1466-8033}, doi = {10.1039/c2ce26588e}, author = {Warule, Sambhaji S. and Chaudhari, Nilima S. and Kale, Bharat B. and Pandiraj, S. and Khare, Ruchita T. and More, Mahendra A.} } @article { ISI:000325676500006, title = {Dehydration of fructose to 5-hydroxymethyl furfural over ordered AlSBA-15 catalysts}, journal = {Microporous and Mesoporous Materials}, volume = {181}, year = {2013}, month = {NOV}, pages = {38-46}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

5-Hydroxymethyl furfural is an important platform chemical. It is successfully synthesized from renewable carbohydrates using mesoporous AlSBA-15 catalysts under biphasic conditions. Fine tuning of the catalyst acidity is important to drive the reaction to give good yields of furan compound. Al-SBA-15 catalysts with different Si/Al ratios were prepared and characterized by XRD, Al-27 MASNMR, SEM, TEM, N-2 sorption, ICP-OES and TPD of ammonia. Results show that part of aluminium is substituted into tetrahedral positions. The catalyst with lower acid site density but medium to strong acid strength favours selective formation of HMF. Under the optimized conditions, HMF selectivity was as high as 88\% at 59 mol\% conversion of fructose. Leaching of part of aluminium occurs under hydrothermal conditions, if solvent mixtures containing water are used, while activity can be retained if DMSO is used as solvent. (c) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Acidity, AlSBA-15, dehydration, fructose, Hydroxymethyl furfural}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2013.07.015}, author = {Lucas, Nishita and Kokate, Ganesh and Nagpure, Atul and Chilukuri, Satyanarayana V.} } @article { ISI:000319417100005, title = {Design, synthesis, structural characterization by IR, 1H, 13C, 15N, 2D-NMR, X-ray diffraction and evaluation of a new class of phenylaminoacetic acid benzylidene hydrazines as pfENR inhibitors}, journal = {Chemical Biology \& Drug Design}, volume = {81}, number = {6}, year = {2013}, month = {JUN}, pages = {715-729}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Recent studies have revealed that plasmodial enoyl-ACP reductase (pfENR, FabI), one of the crucial enzymes in the plasmodial type II fatty acid synthesis II (FAS II) pathway, is a promising target for liver stage malaria infections. Hence, pfENR inhibitors have the potential to be used as causal malarial prophylactic agents. In this study, we report the design, synthesis, structural characterization and evaluation of a new class of pfENR inhibitors. The search for inhibitors began with a virtual screen of the iResearch database by molecular docking. Hits obtained from the virtual screen were ranked according to their Glide score. One hit was selected as a lead and modified to improve its binding to pfENR; from this, a series of phenylamino acetic acid benzylidene hydrazides were designed and synthesized. These molecules were thoroughly characterized by IR, 1H, 13C, 15N, 2D-NMR (COSY, NOESY, 1H-13C, 1H-15N HSQC and HMBC), and X-ray diffraction. NMR studies revealed the existence of conformational/configurational isomers around the amide and imine functionalities. The major species in DMSO solution is the E, E form, which is in dynamic equilibrium with the Z, E isomer. In the solid state, the molecule has a completely extended conformation and forms helical structures that are stabilized by strong hydrogen bond interactions, forming a helical structure stabilized by N-H...O interactions, a feature unique to this class of compounds. Furthermore, detailed investigation of the NMR spectra indicated the presence of a minor impurity in most compounds. The structure of this impurity was deduced as an imidazoline-4-one derivative based on 1H-13C and 1H-15H HMBC spectra and was confirmed from the NOESY spectra. The molecules were screened for in vitro activity against recombinant pfENR enzyme by a spectrophotometric assay. Four molecules, viz. 17, 7, 10, and 12 were found to be active at 7, 8, 10, and 12m concentration, respectively, showing promising pfENR inhibitory potential. A classification model was derived based on a binary QSAR approach termed recursive partitioning (RP) to highlight structural characteristics that could be tuned to improve activity.

}, keywords = {ADMET, docking, enoyl-ACP reductase, FabI, hydrogen bonding, NMR, phenylaminoacetic acid benzylidene hydrazine, Plasmodium falciparum, Plasmodium falciparum enoyl-ACP reductase, QSAR, recursive partitioning, X-ray diffraction}, issn = {1747-0277}, doi = {10.1111/cbdd.12118}, author = {Samal, Ramanuj P. and Khedkar, Vijay M. and Pissurlenkar, Raghuvir R. S. and Bwalya, Angela Gono and Tasdemir, Deniz and Joshi, Ramesh A. and Rajamohanan, P. R. and Puranik, Vedavati G. and Coutinho, Evans C.} } @article { ISI:000320275600007, title = {Desymmetrization approach to the enantiopure syn/anti-1,5-diols via hydrolytic kinetic resolution (hkr) of functionalized meso-bis-epoxides: further elaboration to syn/syn-1,3,5-triols and application to the formal synthesis of cryptocarya diacetate}, journal = {Advanced Synthesis \& Catalysis}, volume = {355}, number = {9}, year = {2013}, month = {JUN}, pages = {1719-1723}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A new approach has been developed for the synthesis of enantiopure syn/anti-1,5-diols by desymmetrization of functionalized meso-bis-epoxides using hydrolytic kinetic resolution (HKR). The usage of this protocol was demonstrated by converting syn-1,5-diols into syn/syn-1,3,5-triols and its subseqent application to the formal synthesis of cryptocarya diacetate.

}, keywords = {bis-epoxides, cryptocarya diacetate, desymmetrization, stereoselective reduction, synthetic methods}, issn = {1615-4150}, doi = {10.1002/adsc.201300098}, author = {Kumar, Pradeep and Chowdhury, Partha Sarathi and Pandey, Menaka} } @article { ISI:000318443400003, title = {Differential protease activity augments polyphagy in helicoverpa armigera}, journal = {Insect Molecular Biology}, volume = {22}, number = {3}, year = {2013}, month = {JUN}, pages = {258-272}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Helicoverpa armigera (Lepidoptera: Noctuidae) and other polyphagous agricultural pests are extending their plant host range and emerging as serious agents in restraining crop productivity. Dynamic regulation, coupled with a diversity of digestive and detoxifying enzymes, play a crucial role in the adaptation of polyphagous insects. To investigate the functional intricacy of serine proteases in the development and polyphagy of H.armigera, we profiled the expression of eight trypsin-like and four chymotrypsin-like phylogenetically diverse mRNAs from different life stages of H.armigera reared on nutritionally distinct host plants. These analyses revealed diet- and stage-specific protease expression patterns. The trypsins expressed showed structural variations, which might result in differential substrate specificity and interaction with inhibitors. Protease profiles in the presence of inhibitors and their mass spectrometric analyses revealed insight into their differential activity. These findings emphasize the differential expression of serine proteases and their consequences for digestive physiology in promoting polyphagy in H.armigera.

}, keywords = {adaptation, chymotrypsin, Helicoverpa armigera, polyphagy, Trypsin}, issn = {0962-1075}, doi = {10.1111/imb.12018}, author = {Chikate, Yojana R. and Tamhane, V. A. and Joshi, Rakesh S. and Gupta, Vidya S. and Giri, Ashok P.} } @article { ISI:000318901000001, title = {Draft genome of ochrobactrum intermedium strain M86 isolated from non-ulcer dyspeptic individual from India}, journal = {GUT Pathogens}, volume = {5}, year = {2013}, month = {APR}, pages = {7}, publisher = {BIOMED CENTRAL LTD}, address = {236 GRAYS INN RD, FLOOR 6, LONDON WC1X 8HL, ENGLAND}, abstract = {

Background: Ochrobactrum intermedium is an emerging opportunistic pathogen of humans that is closely related to members of the genus Brucella. Earlier, we reported the case of an Indian subject with non-ulcer dyspeptic symptoms whose urease positive gastric biopsy revealed the presence of Helicobacter pylori along with non-Helicobacter like bacteria, eventually cultured and identified as O. intermedium strain M86. Results: Here, we describe the unclosed draft genome of the strain M86 with a length of 5,188,688 bp and mean G+C content of 57.9\%. We have also identified many putative gene clusters that might be responsible for its persistence in the gastric mucosa. Comparative analysis of genomic features of Ochrobactrum intermedium strain M86 and Ochrobactrum intermedium LMG 3301(T) was also done. Conclusions: This paper attempts to gain whole-genome based insights into the putative gene determinants of O. intermedium for survival in the highly acidic stomach lumen environment. Identification of genes putatively involved in the various metabolic pathways may lead to a better understanding of the survival of O. intermdedium in acidic condition.

}, issn = {1757-4749}, doi = {10.1186/1757-4749-5-7}, author = {Kulkarni, Girish and Dhotre, Dhiraj and Dharne, Mahesh S. and Shetty, Sudarshan and Chowdhury, Somak and Misra, Vatsala and Misra, Sriprakash and Patole, Milind and Shouche, Yogesh} } @article {43384, title = {Drug targets and biomarker identification from computational study of human notch signaling pathway}, journal = {Clinical and Experimental Pharmacology and Physiology}, volume = {3}, year = {2013}, month = {OCT}, abstract = {Notch signaling pathway is widely implicated in controlling various cellular functions, cell fate determination, and stem cell renewal in human but aberrant activity in cancer stem cells may cause different types of cancers. Understanding the complexity of this pathway to identify important targets for cancer therapy and to suppress the pathway activity without affecting the normal functions is of utmost importance to clinical and experimental pharmacologists. For developing therapeutic strategy, non availability of detailed molecular interactions, complex regulations and cross talks with other pathways pose a serious challenge to get a coherent understanding of this pathway. This motivated us to reconstruct the largest human cell specific Notch pathway with more number of molecules and interactions available from literatures and databases. To identify probable drug targets and biomarkers for cancer prognosis, we also performed computational study of the pathway using structural and logical analysis and identified important hub proteins, cross talks and feedback mechanisms. The model simulation is validated using reported mRNA expression profile in Glioblastoma cell line and the predictions not only show significant accuracy but also able to identify the undetermined expressions. From our simulation, to identify novel combinations of drug targetable proteins and better substitute for GAMMA SECRETASE inhibition, we proposed two alternative scenarios: partial suppression of Notch target proteins by NICD1 \& HIF1A; and complete suppression by NICD1 \& MAML, in Glioblastoma cell line. This reconstructed Notch signaling pathway and the computational analysis for identifying new biomarkers and combinatory drug targets will be useful for future in-vitro and in-vivo analysis to control different cancers}, doi = {10.4172/2161-1459.1000137}, author = {Chowdhury, Saikat and Sarkar, Ram Rup} } @article { ISI:000317909500043, title = {Dual action of BPC194: a membrane active peptide killing bacterial cells}, journal = {Plos One}, volume = {8}, number = {4}, year = {2013}, month = {APR}, pages = {e61541}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Membrane active peptides can perturb the lipid bilayer in several ways, such as poration and fusion of the target cell membrane, and thereby efficiently kill bacterial cells. We probe here the mechanistic basis of membrane poration and fusion caused by membrane-active, antimicrobial peptides. We show that the cyclic antimicrobial peptide, BPC194, inhibits growth of Gram-negative bacteria and ruptures the outer and inner membrane at the onset of killing, suggesting that not just poration is taking place at the cell envelope. To simplify the system and to better understand the mechanism of action, we performed Forster resonance energy transfer and cryogenic transmission electron microscopy studies in model membranes and show that the BPC194 causes fusion of vesicles. The fusogenic action is accompanied by leakage as probed by dual-color fluorescence burst analysis at a single liposome level. Atomistic molecular dynamics simulations reveal how the peptides are able to simultaneously perturb the membrane towards porated and fused states. We show that the cyclic antimicrobial peptides trigger both fusion and pore formation and that such large membrane perturbations have a similar mechanistic basis.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0061541}, author = {Moiset, Gemma and Cirac, Anna D. and Stuart, Marc C. A. and Marrink, Siewert-Jan and Sengupta, Durba and Poolman, Bert} } @article { ISI:000315306200009, title = {Effect of clay and of electrospinning on the polymorphism, structure and morphology of poly(vinylidene fluoride)}, journal = {European Polymer Journal}, volume = {49}, number = {1}, year = {2013}, month = {JAN}, pages = {90-99}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Electrospun poly(vinylidene fluoride) (PVDF) fibers, containing different amounts of montmorillonite clay were produced, in order to study the effect of clay and of the electrospinning process on the polymorphism, structure and morphology of the PVDF matrix, Clay acted as a processing aid agent, avoiding the formation of beads and improving the quality of the fibers. Clay and the electrospinning process acted synergically on the chain mobility, favoring the formation of beta phase of PVDF, the most valuable for its piezoelectric properties, and shaping its semicrystalline morphology. Electrospinning did not significantly aid the dispersion of clay within the matrix. The interplay of formulation and processing in these composites allowed to obtain PVDF-based materials with varying polymorphism, structure and morphology, offering the possibility to ultimately control their functional properties. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Composite, electrospinning, Poly(vinylidene fluoride), Polymer, polymorphism, SAXS}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2012.09.023}, author = {Neppalli, Ramesh and Wanjale, Santosh and Birajdar, Mallinath S. and Causin, Valerio} } @article { ISI:000315720000020, title = {Effect of the viscosity of poly(benzimidazole) on the performance of a multifunctional electrocatalyst with an ideal interfacial structure}, journal = {Journal of Materials Chemistry A}, volume = {1}, number = {13}, year = {2013}, month = {JAN}, pages = {4265-4276}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A novel electrocatalyst system with unique multifunctional characteristics, originated by the presence of a proton conducting polybenzimidazole (PBI-BuI) bound layer and electron conducting hollow carbon nanofibers (CNF) with catalytically active Pt nanoparticles, has been devised based on a simple strategy. This was achieved by decorating Pt nanoparticles along the inner cavity, as well as on the outer walls of the hollow CNF support (F-Pt). In a further extension, a low molecular weight PBI, synthesized by optimizing the experimental parameters, was incorporated into the inner cavity and along the outer surfaces of F-Pt. Excellent dispersion of the Pt nanoparticles was achieved by properly utilizing the available carbon surface results in improved electrocatalytic activity, while the CNF backbone ensures high electron conductivity as well. The polymer binder coverage formed along the inner and outer wall surfaces provides an efficient triple phase boundary (TPB) around the Pt nanoparticles to facilitate the electrode reactions. The amount and the viscosity of the PBI-BuI in the electrode material were systematically varied to study the influence on the electrochemical performance. Transmission electron microscopy analysis confirms PBI insertion into the tubular cavity of CNF. Pore size distribution analysis implies that both the viscosity and the amount of PBI-BuI have a pivotal role in defining the microstructure of the electrode. Electrochemical studies using cyclic voltammetry (CV) and rotating disc electrode (RDE) reveal the exceptionally high activity of this hybrid material with an improved electrochemically active area. The significant improvement for the oxygen reduction reaction is further confirmed by the single cell analysis also. The high power density displayed by the PBI-BuI based system, as compared to the Nafion based system, validates the conceptualization of the well controlled triple-phase boundary in the system. These results demonstrate that PBI-BuI has a constructive effect in tuning the electrochemical activity at an optimum amount and at a favourable viscosity of the proton conducting polymer.

}, issn = {2050-7488}, doi = {10.1039/c3ta00165b}, author = {Balan, Beena K. and Unni, Bipinlal and Chaudhari, Harshal D. and Kharul, Ulhas K. and Kurungot, Sreekumar} } @article {43230, title = {Enhanced field-emission behavior of layered MoS2 sheets}, journal = {Small}, volume = {9}, year = {2013}, month = {AUG}, pages = {2730-2734}, abstract = {Field emission studies are reported for the first time on layered MoS2 sheets at the base pressure of approximate to 1 x 10(-8) mbar. The turn-on field required to draw a field emission current density of 10 A/cm(2) is found to be 3.5 V/m for MoS2 sheets. The turn-on values are found to be significantly lower than the reported MoS2 nanoflowers, graphene, and carbon nanotube-based field emitters due to the high field enhancement factor (approximate to 1138) associated with nanometric sharp edges of MoS2 sheet emitter surface. The emission current-time plots show good stability over a period of 3 h. Owing to the low turn-on field and planar (sheetlike) structure, the MoS2 could be utilized for future vacuum microelectronics/nanoelectronic and flat panel display applications.}, doi = {10.1002/smll.201300002}, author = {Kashid, Ranjit V. and Late, Dattatray J. and Chou, Stanley S. and Huang, Yi-Kai and De, Mrinmoy and Joag, Dilip S. and More, Mahendra A. and Dravid, Vinayak P.} } @article { ISI:000317558000024, title = {Epoxidation of styrene by t-butyl hydroperoxide over gold nanoparticles supported on Yb2O3: effect of gold deposition method, gold loading, and calcination temperature of the catalyst on its surface properties and catalytic performance}, journal = {Journal of Catalysis}, volume = {300}, year = {2013}, month = {APR}, pages = {217-224}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Surface properties and epoxidation performance of Au/Yb2O3 catalyst are influenced by the method of gold deposition [viz. deposition-precipitation (DP), homogeneous deposition-precipitation (HDP) or impregnation], gold loading (0.9-6.6 wt\%), and the catalyst calcination temperature (400-900 degrees C)]. The catalyst showed the best epoxidation performance when it was prepared by the HDP method and calcined at 500 degrees C. The Au/Yb2O3 catalyst even after calcination at 900 degrees C showed good activity and epoxide selectivity. Both Au-0 and Au3+ surface species were found in the catalyst calcined at 800 degrees C, but only Au-0 species were observed at the lower calcination temperatures (\<600 degrees C). The selectivity for styrene oxide increased continuously with the reaction temperature (from 75 degrees C to 97 degrees C) and time (1-5 h), indicating that styrene oxide did not undergo secondary reactions under these conditions. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Au/Yb2O3 catalyst, Epoxidation of styrene, gold nanoparticles, Styrene oxide, tert-Butyl hydroperoxide}, issn = {0021-9517}, doi = {10.1016/j.jcat.2013.01.002}, author = {Choudhary, Vasant R. and Dumbre, Deepa K. and Patil, N. S. and Uphade, B. S. and Bhargava, Suresh Kumar} } @article {42806, title = {Evaluation of viability of halogen{\textbullet}{\textbullet}{\textbullet}O2N interactions: insight form crystal packing in a series of isomeric halo and nitro substituted triaryl compounds with modular positioning of halogen and NO2 groups}, journal = {CrystEngComm}, volume = {15}, year = {2013}, month = {APR}, pages = {5283-5300}, abstract = {

A series of isomeric triaryl compounds with a modular positioning of the halogen and NO2 groups have been synthesized by the azide{\textendash}alkyne {\textquotedblleft}click reaction{\textquotedblright} and have been characterized by single crystal X-ray structure analysis. This isomeric series has provided an opportunity for understanding the efficiency of the bifurcated halogen...NO2 synthon in the organization of the molecules in the crystalline lattice. The changes in molecular conformation, crystal packing and supramolecular aggregation due to the change in the relative positioning of the complementary groups, halogen atom and the NO2 group on ring A and ring C respectively, have been discussed. All the isomers synthesized are crystalline and establish the triazole as a reliable linker for crystal engineering oriented molecular synthesis. The 2-NO2 derivatives display in general, a helical architecture and 3-NO2 derivatives exhibit a centrosymmetric dimeric assembly via the complementary C{\textendash}H...O interactions leading to either a helical or a 2-dimensional sheet pattern. The molecular organization in 4-NO2 derivatives revealed in general a 2D sheet pattern.

}, doi = {10.1039/C3CE40192H}, author = {Ramana, Chepuri V. and Goriya, Yogesh and Durugkar, Kulbhushan A. and Chatterjee, Soumitra and Krishnaswamy, Shobhana and Gonnade, Rajesh G.} } @article { ISI:000323132100073, title = {Highly concise and practical route to clavaminols, sphinganine and (+)-spisulosine via indium mediated allylation of alpha-hydrazino aldehyde and a theoretical insight into the stereochemical aspects of the reaction}, journal = {RSC Advances}, volume = {3}, number = {35}, year = {2013}, month = {JUL}, pages = {15442-15448}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A conceptually different approach has been employed for the synthesis of 1,2-amino alcohols by proline-catalyzed alpha-amination of aldehyde and one-pot indium mediated allylation of the crude alpha-hydrazino aldehydes. DFT based quantum chemical calculations have been performed to obtain a quantitative explanation of the stereoselectivity of the reaction.

}, issn = {2046-2069}, doi = {10.1039/c3ra43048k}, author = {Pandey, Menaka and Chowdhury, Partha Sarathi and Dutta, Achintya Kumar and Kumar, Pradeep and Pal, Sourav} } @article { ISI:000316388900003, title = {Highly efficient catalyst derived from Ni-Fe-hydrotalcite for solvent-free O- or S-acetylation of alcohols, phenols and thiols at room temperature}, journal = {Proceedings of the National Academy of Sciences India Section A-Physical Sciences}, volume = {83}, number = {1}, year = {2013}, month = {MAR}, pages = {15-19}, publisher = {NATL ACAD SCIENCES INDIA}, address = {5 LAJPATRAI RD, ALLAHABAD 211002, INDIA}, abstract = {

Solvent-free O-acetylation of alcohols (including secondary and tertiary alcohols) and phenols and S- acetylation of thiols by acetyl chloride with high product yields at room temperature in a very short reaction period can be easily accomplished using a small amount of solid catalyst obtained from the decomposition (at 600 A degrees C) of Ni-Fe-hydrotalcite. Both the reactions are carried out at room temperature under solvent-free conditions. The catalyst can be easily separated from the reaction mixture, simply by filtration and reused several times without a significant loss of its activity.

}, keywords = {Acetyl chloride, Alcohols, Ni-Fe- ht derived catalyst, O- and S-acetylation, Phenols, Solvent-free}, issn = {0369-8203}, doi = {10.1007/s40010-013-0070-z}, author = {Choudhary, Vasant R.} } @article { ISI:000327071100001, title = {Hollow nanogold/meso-magnetite composite: pulsed laser synthesis, properties, and biosensing application}, journal = {Journal of Nanoparticle Research}, volume = {15}, number = {12}, year = {2013}, month = {NOV}, pages = {Article No. UNSP 2081}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A facile and template-free UV (Excimer) laser photolysis process is demonstrated to transform a Fe-complex into unique hollow Fe3O4 nanosphere morphology with each sphere having nanometric pores and an opening. Depending on the Fe-complex concentration and processing time interesting configurations are seen to evolve. When an identical process is applied to a mixture of Fe-complex and chloroauric acid an enthrallingly decorated Au-Fe3O4 nanostructure evolves, with Au nanoparticles surface-loaded on mesospheric Fe3O4. This room temperature process implemented under normal laboratory conditions is clearly versatile and applicable to heterojunction nanomaterials synthesis in a single-step process. The potential application of these gold-decorated magnetic nanostructures was also investigated for immuno-magnetic capture of E. coli in biosensing and these were found to be sensitive even below 1,000 cfu/ml. The test results demonstrate linear sensing response in the range of 10(3)-10(5) cfu/ml. We also show that these nanostructures can be used for simple electrical conductivity-based biosensing since they show dramatic conductivity change in a simple drop-cast test. A new laser-based approach to the synthesis of unique hollow sphere morphology of magnetite (Fe3O4) without and with Au nanoparticle decoration is presented. The potential application of these gold-decorated magnetic nanostructures was also investigated for immuno-magnetic capture of E. coli in biosensing and these were found to be sensitive even below 1,000 cfu/ml.

}, keywords = {E. coli cells, Fe-complex, Meso-magnetite, Nanobiotechnology, Nanocomposite, Pulse laser irradiation}, issn = {1388-0764}, doi = {10.1007/s11051-013-2081-8}, author = {Chaudhari, Nilima and Warule, Sambhaji and Agrawal, Shailaja and Thakare, Vishal and Jouen, Samuel and Hannoyer, Beatrice and Kale, Bharat and Paknikar, Kishore and Ogale, Satishchandra B.} } @article { ISI:000317399600014, title = {Hydrophobic and hydrophilic balance and its effect on mesophase behaviour in hydroxyalkyl ethers of methyl glucopyranoside}, journal = {Chemistry-A European Journal}, volume = {19}, number = {16}, year = {2013}, month = {APR}, pages = {5041-5049}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Four series of monosubstituted methyl -D-glucopyranoside hydroxyalkyl ethers were prepared and their thermotropic and lyotropic self-organising properties were investigated in terms of the hydrophobichydrophilic balance with respect to their molecular structures. The results obtained lead us to a new understanding of the forces that drive the formation of condensed soft-matter phases.

}, keywords = {carbohydrates, liquid crystals, mesophases, Self-assembly, soft matter}, issn = {0947-6539}, doi = {10.1002/chem.201202933}, author = {Singh, Madan K. and Xu, Rui and Moebs, Sylvie and Kumar, Anil and Queneau, Yves and Cowling, Stephen J. and Goodby, John W.} } @article { ISI:000325780800062, title = {Interplay between crystallization and glass transition in binary lennard-Jones mixtures (vol 139, 104501, 2013)}, journal = {Journal of Chemical Physics}, volume = {139}, number = {14}, year = {2013}, month = {OCT}, pages = {Article No. 149902}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, issn = {0021-9606}, doi = {10.1063/1.4824740}, author = {Banerjee, Atreyee and Chakraborty, Suman and Bhattacharyya, Sarika Maitra} } @article { ISI:000324387400035, title = {Interplay between crystallization and glass transition in binary Lennard-Jones mixtures}, journal = {Journal of Chemical Physics}, volume = {139}, number = {10}, year = {2013}, month = {SEP}, pages = {Article No. 104501}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

In this work we explore the interplay between crystallization and glass transition in different binary mixtures by changing their inter-species interaction length and also the composition. We find that only those systems which form bcc crystal in the equimolar mixture and whose global structure for larger x(A) (x(A) = 0.6, where x(A) is the mole fraction of the bigger particles) is a mixed fcc + bcc phase, do not crystallize at this higher composition. However, the systems whose equimolar structure is a variant of fcc (NaCl type crystal) and whose global structure at larger xA is a mixed NaCl + fcc phase, crystallize easily to this mixed structure. We find that the stability against crystallization of this {\textquoteleft}{\textquoteleft}bcc zone{\textquoteright}{\textquoteright} is due to the frustration between the locally preferred structure (LPS) and the mixed bcc + fcc crystal. Our study suggests that when the global structure is a mixed crystal where a single species contributes to both the crystal forms and where the two crystal forms have large difference in some order parameter related to that species then this induces frustration between the LPS and the global structure. This frustration makes the systems good glass former. When x(A) is further increased (0.70 \<= x(A) \< 0.90) the systems show a tendency towards mixed fcc crystal formation. However, the {\textquoteleft}{\textquoteleft}bcc zone{\textquoteright}{\textquoteright} even for this higher composition is found to be sitting at the bottom of a V shaped phase diagram formed by two different variants of the fcc crystal structure, leading to its stability against crystallization. (C) 2013 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4820402}, author = {Banerjee, Atreyee and Chakrabarty, Suman and Bhattacharyya, Sarika Maitra} } @article { ISI:000326207600024, title = {Mechanism of action of novel synthetic dodecapeptides against Candida albicans}, journal = {Biochimica Et Biophysica Acta-General Subjects}, volume = {1830}, number = {11}, year = {2013}, month = {NOV}, pages = {5193-5203}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Background: Three de novo designed low molecular weight cationic peptides (IJ2, IJ3 and IJ4) containing an unnatural amino acid alpha,beta-didehydrophenylalanine (APhe) exhibited potent antifungal activity against fluconazole (FLC) sensitive and resistant clinical isolates of Candida albicans as well as non-albi cans and other yeast and filamentous pathogenic fungi. In the present study, their synthesis, susceptibility of different fungi and the mechanism of anti-candidal action have been elucidated. Methods: The antimicrobial peptides (AMPs) were synthesized by solid-phase method and checked for antifungal activity against different yeasts and fungi by broth microdilution method. Anti-candidal mode of action of the peptides was investigated through detecting membrane permeabilization by confocal microscopy, Reactive Oxygen Species (ROS) generation by fluorometry, apoptosis and necrosis by flow cytometry and cell wall damage using Scanning and Transmission Electron Microscopy. Results and conclusions: The MIC of the peptides against C. albicans and other yeast and filamentous fungal pathogens ranged between 3.91 and 250 mu M. All three peptides exhibited effect on multiple targets in C. albi cans including disruption of cell wall structures, compromised cell membrane permeability leading to their enhanced entry into the cells, accumulation of ROS and induction of apoptosis. The peptides also showed synergistic effect when used in combination with fluconazole (FLC) and caspofungin (CAS) against C. albi cans. General significance: The study suggests that the AMPs alone or in combination with conventional antifungals hold promise for the control of fungal pathogens, and need to be further explored for treatment of fungal infections. (C) 2013 Elsevier By. All rights reserved.

}, keywords = {Antifungal peptide, Antimicrobial peptide (AMP), Apoptosis, Candida albicans, Reactive Oxygen Species (ROS)}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2013.07.016}, author = {Maurya, Indresh Kumar and Thota, Chaitanya Kumar and Sharma, Jyotsna and Tupe, Santosh Genba and Chaudhary, Preeti and Singh, Manoj Kumar and Thakur, Indu Shekhar and Deshpande, Mukund V. and Prasad, Rajendra and Chauhan, Virander Singh} } @article { ISI:000317548400026, title = {Mechanochemical synthesis of chemically stable isoreticular covalent organic frameworks}, journal = {Journal of the American Chemical Society}, volume = {135}, number = {14}, year = {2013}, month = {APR}, pages = {5328-5331}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Three thermally and chemically stable isoreticular covalent organic frameworks (COFs) were synthesized via room-temperature solvent-free mechanochemical grinding. These COFs were successfully compared with their solvothermally synthesized counterparts in all aspects. These solvent-free mechanochemically synthesized COFs have moderate crystallinity with remarkable stability in boiling water, acid (9 N HCl), and base [TpBD (MC) in 3 N NaOH and TpPa-2 (MC) in 9 N NaOH]. Exfoliation of COF layers was simultaneously observed with COF formation during mechanochemical synthesis. The structures thus obtained seemed to have a graphene-like layered morphology (exfoliated layers), unlike the parent COFs synthesized solvothermally.

}, issn = {0002-7863}, doi = {10.1021/ja4017842}, author = {Biswal, Bishnu P. and Chandra, Suman and Kandambeth, Sharath and Lukose, Binit and Heine, Thomas and Banerjeet, Rahul} } @article { ISI:000315707700003, title = {MgCl2 center dot 6CH(3)OH: a simple molecular adduct and its influence as a porous support for olefin polymerization}, journal = {ACS Catalysis}, volume = {3}, number = {3}, year = {2013}, month = {MAR}, pages = {303-311}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A single phase molecular adduct, MgCl2 center dot 6CH(3)OH has been synthesized using MgCl2 and the simplest alcohol, methanol. Structural, spectroscopic, and morphological studies have been carried out for a better understanding of the single phase MgCl2 center dot 6CH(3)OH adduct. C-13 CPMAS solid state NMR studies show all six methanol molecules are magnetically equivalent and present in a single environment around the Mg2+ center. Raman spectral analysis of the characteristic peak at 708 cm(-1) substantiates octahedral coordination of six CH3OH molecules around Mg2+. Solid state C-13 NMR measurements, made after heat treatment at different temperatures, have been utilized to understand the variations in CH3OH stoichiometry and coordination around Mg2+ with temperature. A titanated active catalyst, TiCl4 on MgCl2 center dot 6CH(3)OH, has also been synthesized and subjected to detailed characterizations. The active catalyst shows high surface area (102 m(2)/g) and mesoporosity. The titanated catalyst has been screened for ethylene polymerization reactions using different cocatalysts (R3Al; R= -CH3, -CH2CH3, and -CH2CH(CH3)(2)). A total of 7.25 kg of polyethylene per gram of catalyst has been obtained with Me3Al cocatalyst, which is six times higher in activity compared with commercial Me3Al/TiCl4/MgCl2 center dot 6EtOH-supported orted catalystAlthough porosity influences the catalytic activity, other factors also seem to contribute to the total catalytic activity.

}, keywords = {heterogeneous catalysis, MgCl2, Molecular adduct, olefin polymerization, Ziegler-Natta catalyst}, issn = {2155-5435}, doi = {10.1021/cs300730j}, author = {Gnanakumar, Edwin S. and Gowda, Ravikumar R. and Kunjir, Shrikant and Ajithkumar, Thalasseril G. and Rajamohanan, P. R. and Chakraborty, Debashis and Gopinath, Chinnakonda S.} } @article { ISI:000326615000007, title = {Molecular insights into resistance mechanisms of lepidopteran insect pests against toxicants}, journal = {Journal of Proteome Research}, volume = {12}, number = {11}, year = {2013}, month = {NOV}, pages = {4727-4737}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Insect pests remain a major reason for crop loss worldwide despite extensive use of chemical insecticides. More than B 50\% of all insecticides are organophosphates, followed by synthetic pyrethroids, organochlorines, carbamates, and biopesticides, and their continued use may have many environmental, agricultural, medical, and socioeconomic issues. Importantly, only a countable number of insects have acquired the status of crop pests, mostly due to monoculture of crop plants and polyphagous nature of the insects. We focus on A adaptations of Lepidopteran insects to phytochemicals and synthetic pesticides in native and modern agricultural systems. Because of heavy use of chemical insecticides, a strong selection pressure is imposed on insect populations, resulting in the emergence of resistance against candidate compound(s). Current knowledge suggests that insects generally implement a three-tier system to overcome the effect of toxic compounds at physiological, biochemical, and genetic levels. Furthermore, we have discussed whether the adaptation to phytochemicals provides an advantage to the insect while encountering synthetic insecticide molecules. Specific metabolic pathways employed by insects to convert deterrents into less toxic forms or their removal from the system are highlighted. Using the proteomics approach, insect proteins interacting with insecticides can be identified, and their modification in resistant insects can be characterized. Also, systems biology studies can offer useful cues to decipher the molecular networks participating in the metabolism of detrimental compounds.

}, keywords = {field crops, insect-pests, insecticide, Lepidoptera, proteomics, resistance mechanisms}, issn = {1535-3893}, doi = {10.1021/pr400642p}, author = {Dawkar, Vishal V. and Chikate, Yojana R. and Lomate, Purushottam R. and Dholakia, Bhushan B. and Gupta, Vidya S. and Giri, Ashok P.} } @article { ISI:000315516400021, title = {Molecular mapping of leaf rust resistance gene Lr15 in hexaploid wheat}, journal = {Molecular Breeding}, volume = {31}, number = {3}, year = {2013}, month = {MAR}, pages = {743-747}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

Leaf rust is a widespread and commonly occurring rust disease of wheat. Genetic resistance is the most economical method of reducing losses due to leaf rust. Lr15 has been shown to be present on wheat chromosome 2D and is reported to be a seedling resistance gene. However, tightly linked markers associated with Lr15 have not been reported to date. To identify molecular markers linked to Lr15, an F-2 mapping population of Thatcher x Thatcher-Lr15 was generated. Available wheat simple sequence repeat markers were utilized in parental screening and polymorphic markers were used to analyze the entire population of 221 plants. Phenotypic evaluations of the F-2-derived F-3 progenies with Puccinia triticina Eriks. pathotype 162A (93R15) confirmed the monogenic inheritance of Lr15. The linkage group representing chromosome 2DS was constructed at LOD 4.0 which revealed the closest flanking markers Xgwm4562 and Xgwm102 at a distance of 3.1 and 9.3 cM, respectively. Furthermore, utilization of these flanking markers in combination has successfully identified wheat lines with or without Lr15. These markers could potentially be useful in gene pyramiding with other genes to enhance rust resistance in wheat.

}, keywords = {Disease resistance, Leaf rust, Marker-assisted selection, Simple sequence repeat, Wheat}, issn = {1380-3743}, doi = {10.1007/s11032-012-9813-9}, author = {Dholakia, Bhushan B. and Rajwade, A. V. and Hosmani, P. and Khan, R. R. and Chavan, S. and Reddy, D. M. R. and Lagu, Meena D. and Bansal, Urmil K. and Saini, R. G. and Gupta, V. S.} } @article { ISI:000319185000049, title = {Morphology and dynamics of carbon nanotube in polycarbonate carbon nanotube composite from dissipative particle dynamics simulation}, journal = {Macromolecules}, volume = {46}, number = {9}, year = {2013}, month = {MAY}, pages = {3631-3638}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Morphology and dynamics of carbon nanotube (CNT) in polycarbonate matrix with different mixing ratios are studied in mesoscale by using dissipative particle dynamics (DPD). We have used atomistic simulation to derive necessary interaction parameter for mesoscale DPD simulation for polycarbonate nanotube composite using Flory-Huggins theory. The diffusion and morphology of nanotubes in different concentrations (2\%, 5\%, 10\%) are investigated. Diffusivity of nano tubes in polymer matrices is explored at different temporal regimes of simulation. Diffusion of nanotubes becomes significantly slow when bundling of nanotubes takes place. The bundle formation of nanotubes is observed in all of three mixtures with varying degrees of assembling and alignment Bundle size analysis is performed to study the extent of bundling affinity of CNTs in different filler concentrations. Size of the bundles of nanotubes is more in higher nanotube concentrations. In the 10\% mixture percolation network is found to be formed by bundles of nanotubes.

}, issn = {0024-9297}, doi = {10.1021/ma302425s}, author = {Chakraborty, Souvik and Choudhury, Chandan Kumar and Roy, Sudip} } @article { ISI:000327481200002, title = {Noble metal promoted CeO2-ZrO2-supported ni catalysts for liquid-phase hydrogenation of cinnamaldehyde}, journal = {Catalysis Letters}, volume = {143}, number = {12}, year = {2013}, month = {DEC}, pages = {1266-1276}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Pd or Pt promoted CeO2-ZrO2-supported Ni catalysts exhibited superior catalytic activity to the hitherto known Ni catalysts for liquid-phase hydrogenation of cinnamaldehyde at moderate conditions. Under similar experimental conditions, the unpromoted catalyst was selective for hydrocinnamaldehyde product (C=C hydrogenation) whereas the promoted catalyst yielded 3-phenyl propanol (C=C and C=O hydrogenation product). Enhanced dispersion of Ni was the cause for higher activity of the promoted Ni catalysts.

}, keywords = {Ceria-zirconia, Cinnamaldehyde, Noble metal promoted catalyst, Selective hydrogenation, Supported Ni catalyst}, issn = {1011-372X}, doi = {10.1007/s10562-013-1064-9}, author = {Bhogeswararao, Seemala and Kumar, V. Pavan and Chary, K. V. R. and Srinivas, D.} } @article { ISI:000325950600094, title = {Novel and efficient synthesis of azaarene-substituted 3-hydroxy-2-oxindoles via sp(3) C-H functionalization of 2-methyl azaarenes and (2-azaaryl)methanes over a heterogeneous, reusable silica-supported dodecatungstophosphoric acid catalyst}, journal = {RSC Advances}, volume = {3}, number = {43}, year = {2013}, month = {AUG}, pages = {20281-20286}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A novel and efficient protocol has been developed for the synthesis of azaarene-substituted 3-hydroxy-2-oxindoles via sp(3) C-H functionalization of 2-methyl azaarenes and (2-azaaryl)methanes with isatin in good to excellent yield. This is the first example in which heterogeneous, reusable silica supported dodecatungstophosphoric acid (DTP/SiO2) catalyzed sp(3) C-H functionalization of 2-substituted azaarenes and (2-azaaryl)methanes.

}, issn = {2046-2069}, doi = {10.1039/c3ra43515f}, author = {Mulla, Shafeek Abdul Rashid and Pathan, Mohsinkhan Y. and Chavan, Santosh S.} } @conference { ISI:000317266700656, title = {Novel, band-controlled metal oxide compositions for semiconductor-mediated photocatalytic splitting of water to produce H-2}, booktitle = { 57th DAE Solid State Physics Symposium}, series = {AIP Conference Proceedings}, volume = {1512}, year = {2013}, note = {57th DAE Solid State Physics Symposium, Indian Inst Technol, Bombay, INDIA, DEC 03-07, 2012}, month = {FEB}, pages = {1321}, publisher = {Gov India, Dept Atom Energy (DAE), Board Res Nucl Sci (BRNS)}, organization = {Gov India, Dept Atom Energy (DAE), Board Res Nucl Sci (BRNS)}, address = {Indian Institute of Bombay, India }, isbn = {978-0-7354-1133-3}, issn = {0094-243X}, doi = {10.1063/1.4791546}, author = {Gupta, Narendra M.}, editor = {Chauhan, A. K. and Murli, C. and Gadkari, S. C.} } @article { ISI:000323761100009, title = {Novel mechanism for antiglycative action of limonene through stabilization of protein conformation}, journal = {Molecular Biosystems}, volume = {9}, number = {10}, year = {2013}, month = {JUN}, pages = {2463-2472}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Inhibition of protein glycation is known to ameliorate secondary complications in diabetes. In the present study antiglycative properties of limonene, a natural product, were evaluated using BSA as a model protein. AMG (aminoguanidine) was used as a positive control. Measurement of total AGEs (Advanced Glycation End-products) and specific AGEs revealed that limonene could inhibit protein glycation to the extent of 56.3\% and 75.1\% respectively at 50 mu M concentration as against 54.4\% and 82.2\% by AMG at 1 mM. Congo red binding and CD (Circular Dichroism) analysis revealed inhibition of alpha-helix to beta-sheet transition wherein 18.5\% beta-sheet structures were observed in glycated BSA (bovine serum albumin) as against 4.9\% with limonene. Glycation of protein in the presence of urea was enhanced by 18\%, while in the presence of limonene it was reduced by 23\% revealing the stabilizing effect of limonene. Electrophoretic mobility was similar to the normal control and a zeta potential value of -12.1 mV as against -15.1 mV in diabetic control was observed. Inhibition of glycation in limonene treated samples was confirmed through LC-MS analysis wherein AGEs such as pentosidine, CML (N-epsilon-(carboxymethyl)lysine), CEL (N-epsilon-(carboxyethyl) lysine), MOLD (methylglyoxal-lysine dimer) and imidazolone observed in glycated samples were absent in limonene treated samples. PatchDock studies revealed that limonene could bind to the major glycation sites IB, IIA and IIB sub domains and AMG to the IIIA sub domain. Thus limonene is a potent protein glycation inhibitor that prevents protein glycation through a novel mechanism of stabilization of protein structure through hydrophobic interactions.

}, issn = {1742-206X}, doi = {10.1039/c3mb00020f}, author = {Joglekar, Madhav M. and Panaskar, Shrimant N. and Chougale, Ashok D. and Kulkarni, Mahesh J. and Arvindekar, Akalpita U.} } @article { ISI:000313694200024, title = {One pot solvent free synthesis and in vitro antitubercular screening of 3-aracylphthalides against mycobacterium tuberculosis}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {23}, number = {3}, year = {2013}, month = {FEB}, pages = {711-714}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

One pot synthesis of 3-Aracylphthalide was accomplished in good yield by reacting 2-carboxy benzaldehyde with various aromatic methyl ketones in presence of methane sulphonic acid. Various phthalides thus obtained were characterized with spectral techniques. These phthalides were subjected to in vitro antitubercular screening against Mycobacterium tuberculosis H37Ra (MTB) by using XRMA protocol. Among the phthalides screened, four exhibited half maximal inhibitory concentration (IC50) in the range of 0.81-1.24 mu g/ml thereby providing potential lead compounds for future drug discovery studies. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {3-Aracylphthalide, Antitubercular activity, Methane sulphonic acid, One pot synthesis}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2012.11.097}, author = {Limaye, Rohan A. and Kumbhar, Virendra B. and Natu, Arun D. and Paradkar, Madhusudan V. and Honmore, Varsha S. and Chauhan, Rubia R. and Gample, Suvarna P. and Sarkar, Dhiman} } @article { ISI:000323020400047, title = {One-pot migration-formylation of benzyl aryl ethers under duff reaction condition}, journal = {Tetrahedron Letters}, volume = {54}, number = {35}, year = {2013}, month = {AUG}, pages = {4789-4792}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A one-pot migration-formylation of benzyl aryl ethers under Duff reaction condition is described. The reaction was performed with HMTA (hexamethylene tetramine) and TFA (trifluoroacetic acid). Under the optimal reaction conditions, a variety of Bn and PMB ethers underwent ortho rearrangement. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Benzyl aryl ethers, Duff reaction, Hexamethylene tetramine, One-pot, ortho Rearrangement}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2013.06.133}, author = {Chavan, Subhash P. and Lasonkar, Pradeep B.} } @article { ISI:000314381700030, title = {One-pot synthesis of gold nanoparticle/molybdenum cluster/graphene oxide nanocomposite and its photocatalytic activity}, journal = {Applied Catalysis B-Environmental}, volume = {130}, year = {2013}, month = {FEB}, pages = {270-276}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The paper reports on a facile one-pot synthesis of a tri-component gold nanoparticle/molybdenum cluster/graphene oxide (AuNPs@Mo-GO) nanohybrid composite. The synthetic methodology consists on direct UV irradiation of an aqueous solution containing graphene oxide (GO), Na-2[Mo6Br8(N-3)(6)], HAuCl4 center dot 3H(2)O and isopropanol at room temperature in air using a UV fiber lamp. The composite material exhibits very high photocatalytic activity for the degradation of rhodamine B under visible light irradation. The resulting nanohybrid material was characterized using Raman spectroscopy, UV-vis spectrometry, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). (c) 2012 Elsevier B.V. All rights reserved.

}, keywords = {gold nanoparticles, graphene oxide, Nanohybrid, Photodegradation, Rhodamine B, visible light, [Mo6Br8(N-3)(6)](2-)cluster}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2012.11.017}, author = {Barras, Alexandre and Das, Manash R. and Devarapalli, Rami Reddy and Shelke, Manjusha V. and Cordier, Stephane and Szunerits, Sabine and Boukherroub, Rabah} } @article { ISI:000315540200007, title = {One-step method for the synthesis of aryl olefins from aryl aldehydes and aliphatic aldehydes}, journal = {Tetrahedron Letters}, volume = {54}, number = {12}, year = {2013}, month = {MAR}, pages = {1528-1530}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A conceptually new one-step reaction affording unexpected aryl olefinic product from aromatic aldehyde, aliphatic aldehyde and malononitrile in the presence of acetic acid-ammonium acetate under mild reaction conditions without using any metal catalyst is reported. This novel reaction was used to prepare a number of substituted aryl olefins including new molecules. (c) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Aliphatic aldehyde, Aromatic aldehyde, Aryl olefin, Dicyanoaniline, Malononitrile}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2013.01.008}, author = {Borate, Hanumant B. and Gaikwad, Supriya H. and Kudale, Ananada S. and Chavan, Subhash P. and Pharande, Shrikant G. and Wagh, Vitthal D. and Sawant, Vikram S.} } @article { ISI:000315968900025, title = {Organophotocatalysis in nanostructured soft gel materials as tunable reaction vessels: comparison with homogeneous and micellar solutions}, journal = {Journal of Materials Chemistry A}, volume = {1}, number = {14}, year = {2013}, month = {FEB}, pages = {4577-4588}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Riboflavin tetraacetate-catalyzed aerobic photooxidation of 1-(4-methoxyphenyl)ethanol was investigated as a model reaction under blue visible light in different soft gel materials, aiming to establish their potential as reaction vessels for photochemical transformations. Three strategies involving different degrees of organization of the catalyst within the gel network were explored, and the results compared to those obtained in homogeneous and micellar solutions. In general, physical entrapment of both the catalyst and the substrate under optimized concentrations into several hydrogel matrices (including low-molecular-weight and biopolymer-based gels) allowed the photooxidation with conversions between 55 and 100\% within 120 min (TOF similar to 0.045-0.08 min(-1); k(obs) similar to 0.011-0.028 min(-1)), albeit with first-order rates ca. 1-3-fold lower than in solution under comparable non-stirred conditions. Remarkably, the organogel made of a cyclohexane-based bisamide gelator in CH3CN not only prevented the photodegradation of the catalyst but also afforded full conversion in less than 60 min (TOF similar to 0.167 min(-1); k(obs) similar to 0.073 min(-1)) without the need of additional proton transfer mediators (e. g., thiourea) as it occurs in CH3CN solutions. In general, the gelators could be recycled without detriment to their gelation ability and reaction rates. Moreover, kinetics could be fine-tuned according to the characteristics of the gel media. For instance, entangled fibrillar networks with relatively high mechanical strength were usually associated with lower reaction rates, whereas wrinkled laminated morphologies seemed to favor the reaction. In addition, the kinetics results showed in most cases a good correlation with the aeration efficiency of the gel media.

}, issn = {2050-7488}, doi = {10.1039/c3ta01109g}, author = {Bachl, Jurgen and Hohenleutner, Andreas and Dhar, Basab Bijayi and Cativiela, Carlos and Maitra, Uday and Koenig, Burkhard and Diaz, David Diaz} } @article { ISI:000209465100066, title = {Oxidoreductase from {\textquoteleft}Alphonso{\textquoteright} mango catalyzing biosynthesis of furaneol and reduction of reactive carbonyls}, journal = {SpringerPlus}, volume = {2}, year = {2013}, month = {OCT}, pages = {494}, publisher = {SPRINGER INTERNATIONAL PUBLISHING AG}, type = {Article}, address = {GEWERBESTRASSE 11, CHAM, CH-6330, SWITZERLAND}, abstract = {

Two furanones, furaneol (4-hydroxy-2,5-dimethyl-3(2H)-furanone) and mesifuran (2,5-dimethyl-4-methoxy-3(2H)-furanone), are important constituents of flavor of the Alphonso cultivar of mango (Mangifera indica). To get insights into the biosynthesis of these furanones, we isolated an enone oxidoreductase gene from the Alphonso mango. It has high sequence similarity to an alkenal/one oxidoreductase from cucumber (79\% identity) and enone oxidoreductases from tomato (73\% identity) and strawberry (72\% identity). The complete open reading frame was expressed in E. coli and the (his) 6-tagged recombinant protein was purified by affinity chromatography. The purified protein assayed with NADH as a reducing agent converted D-fructose-1,6-diphosphate into furaneol, the immediate precursor of mesifuran. The enzyme was also able to convert two highly reactive carbonyls, 3-buten-2-one and 1-penten-3-one, produced by lipid peroxidation in plants, into their saturated derivatives. Expression profiling in various ripening stages of Alphonso fruits depicted an expression maxima at 10 days after harvest stage, shortly before the appearance of the maximum amount of furanones (completely ripe stage, 15 days after harvest). Although no furanones were detected at the 0 day after harvest stage, significant expression of this gene was detected in the fruits at this stage. Overall, the results suggest that this oxidoreductase plays important roles in Alphonso mango fruits.

}, keywords = {Detoxification, Enone oxidoreductase, Flavor, Mangifera indica, Ripening}, issn = {2193-1801}, doi = {10.1186/2193-1801-2-494}, author = {Kulkarni, Ram and Chidley, Hemangi G. and Deshpande, Ashish and Schmidt, Axel and Pujari, Keshav and Giri, Ashok P. and Gershenzon, Jonathan and Gupta, Vidya} } @article { ISI:000313557600018, title = {Proteomic analysis of protease resistant proteins in the diabetic rat kidney}, journal = {Molecular \& Cellular Proteomics}, volume = {12}, number = {1}, year = {2013}, month = {JAN}, pages = {228-236}, publisher = {AMER SOC BIOCHEMISTRY MOLECULAR BIOLOGY INC}, address = {9650 ROCKVILLE PIKE, BETHESDA, MD 20814-3996 USA}, abstract = {

Glycation induced protein aggregation has been implicated in the development of diabetic complications and neurodegenerative diseases. These aggregates are known to be resistant to proteolytic digestion. Here we report the identification of protease resistant proteins from the streptozotocin induced diabetic rat kidney, which included enzymes in glucose metabolism and stress response proteins. These protease resistant proteins were characterized to be advanced glycation end products modified and ubiquitinated by immunological and mass spectrometry analysis. Further, diabetic rat kidney exhibited significantly impaired proteasomal activity. The functional analysis of identified physiologically important enzymes showed that their activity was reduced in diabetic condition. Loss of functional activity of these proteins was compensated by enhanced gene expression. Aggregation prone regions were predicted by in silico analysis and compared with advanced glycation end products modification sites. These findings suggested that the accumulation of protein aggregates is an inevitable consequence of impaired proteasomal activity and protease resistance due to advanced glycation end products modification. Molecular \& Cellular Proteomics 12: 10.1074/mcp.M112.020651, 228-236, 2013.

}, issn = {1535-9476}, doi = {10.1074/mcp.M112.020651}, author = {Bansode, Sneha B. and Chougale, Ashok D. and Joshi, Rakesh S. and Giri, Ashok P. and Bodhankar, Subhash L. and Harsulkar, Abhay M. and Kulkarni, Mahesh J.} } @article { ISI:000313764300025, title = {Proteomic study reveals downregulation of apolipoprotein A1 in plasma of poorly controlled diabetes: a pilot study}, journal = {Molecular Medicine Reports}, volume = {7}, number = {2}, year = {2013}, month = {FEB}, pages = {495-498}, publisher = {SPANDIDOS PUBL LTD}, address = {POB 18179, ATHENS, 116 10, GREECE}, abstract = {

Proteomic approaches aid in gaining a better understanding of the pathophysiology of diabetic complications. In view of this, differential protein expression in diabetic plasma samples was studied by a combination of proteomic and western blot analyses. Diabetic plasma samples were categorized based on glycated haemoglobin levels as controlled diabetes (CD; 7-8\%), poorly controlled diabetes (PCD; \>8\%) and non-diabetic control (ND;\<6.4\%). Two-dimensional electrophoresis and liquid chromatography-mass spectrometry revealed differential expression of proteins including upregulation of fibrinogen and haptoglobin and downregulation of vitamin D binding protein, alpha-1-antitrypsin, transthyretin and apolipoprotein A1 (Apo A1) in diabetic compared with non-diabetic plasma samples. Amongst these proteins, Apo A1 downregulation was prominent in PCD. Downregulation of Apo A1 may serve as an early predictive marker of diabetic complications.

}, keywords = {biomarker, HbA1c, proteomics}, issn = {1791-2997}, doi = {10.3892/mmr.2012.1223}, author = {Bhonsle, Hemangi S. and Korwar, Arvind M. and Chougale, Ashok D. and Kote, Sachin S. and Dhande, Nitin L. and Shelgikar, Kishore M. and Kulkarni, Mahesh J.} } @article { ISI:000321431600027, title = {Proton-conducting supramolecular metallogels from the lowest molecular weight assembler ligand: a quote for simplicity}, journal = {Chemistry-A European Journal}, volume = {19}, number = {29}, year = {2013}, month = {JUL}, pages = {9562-9568}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Oxalic acid has been proven to be the lowest molecular weight organic ligand able to form robust supramolecular metallogel networks in the presence of metal salts. In particular, two novel multifunctional metallogels were readily prepared at room temperature by simple mixing of stock solutions of Cu-II acetate monohydrate or Cu-II perchlorate hexahydrate and oxalic acid dihydrate. Formation of different polymorphs and unprecedented proton conduction under anhydrous conditions were also demonstrated with some of these materials.

}, keywords = {Copper, low-molecular-weight ligands, metallogels, proton conductivity, supramolecular chemistry}, issn = {0947-6539}, doi = {10.1002/chem.201204542}, author = {Saha, Subhadeep and Schoen, Eva-Maria and Cativiela, Carlos and Diaz, David Diaz and Banerjee, Rahul} } @article { ISI:000326259800016, title = {Quantifying the mechanism of phosphate monoester hydrolysis in aqueous solution by evaluating the relevant Ab initio QM/MM free-energy surfaces}, journal = {Journal of Physical Chemistry B}, volume = {117}, number = {42}, year = {2013}, month = {OCT}, pages = {12807-12819}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Understanding the nature of the free-energy surfaces for phosphate hydrolysis is a prerequisite for understanding the corresponding key chemical reactions in biology. Here, the challenge has been to move to careful ab initio QM/MM (QM(ai)/MM) free-energy calculations, where obtaining converging results is very demanding and computationally expensive. This work describes such calculations, focusing on the free-energy surface for the hydrolysis of phosphate monoesters, paying special attention to the comparison between the one water (1W) and two water (2W) paths for the proton-transfer (PT) step. This issue has been explored before by energy minimization with implicit solvent models and by nonsystematic QM/MM energy minimization, as well as by nonsystematic free-energy mapping. However, no study has provided the needed reliable 2D (3D) surfaces that are necessary for reaching concrete conclusions. Here we report a systematic evaluation of the 2D (3D) free-energy maps for several relevant systems, comparing the results of QM(ai)/MM and QM(ai)/implicit solvent surfaces, and provide an advanced description of the relevant energetics. It is found that the 1W path for the hydrolysis of the methyl diphosphate (MDP) trianion is 6-9 kcal/mol higher than that the 2W path. This difference becomes slightly larger in the presence of the Mg2+ ion because this ion reduces the plc of the conjugated acid form of the phosphate oxygen that accepts the proton. Interestingly, the BLYP approach (which has been used extensively in some studies) gives a much smaller difference between the 1W and 2W activation barriers. At any rate, it is worth pointing out that the 2W transition state for the PT is not much higher that the common plateau that serves as the starting point of both the 1W and 2W PT paths. Thus, the calculated catalytic effects of proteins based on the 2W PT mechanistic model are not expected to be different from the catalytic effects predicted using the 1W PT mechanistic model, which was calibrated on the observed barrier in solution and in which the TS charge distribution was similar to the that of the plateau (as was done in all of our previous EVB studies).

}, issn = {1520-6106}, doi = {10.1021/jp4020146}, author = {Plotnikoy, Nikolay V. and Prasad, B. Ram and Chakrabarty, Suman and Chu, Zhen T. and Warshel, Arieh} } @article { ISI:000326319800045, title = {Role of metal ion in specific recognition of pyrophosphate ion under physiological conditions and hydrolysis of the phosphoester linkage by alkaline phosphatase}, journal = {Inorganic Chemistry}, volume = {52}, number = {19}, year = {2013}, month = {OCT}, pages = {11034-11041}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Complexes synthesized from Zn(II), Cu(II), and Cd(II), using a dipicolyl amine derivative (L), showed unique specificity toward pyrophosphate ion (PPi or P4O74-) among all other common anionic analytes, including different biologically significant phosphate ion (PO43-, H2PO42-) or phosphate-ion-based nucleotides, such as AMP, ADP, ATP, and CTP. However, the relative affinities of PPi toward these three metal complexes were found to vary and follow the order K-a(L.Zn-PPi) \> are given in units of (L.Cu-PPi)(a) \>= K-a(L.Cd-PPi). Luminescence responses of the receptor L were substantial on binding to Zn2+ and Cd2+, while relatively a much smaller luminescence response was observed in the presence of Cu2+. Luminescence responses of L.M-PPi (M is Zn2+, Cd2+, and Cu2+) were further modified on binding to the PPi ion. This could be utilized for quantitative detection of PPi in physiological condition as well as for developing a real time {\textquoteleft}{\textquoteleft}turn-on{\textquoteright}{\textquoteright} (for L.Zn and L.Cu) and {\textquoteleft}{\textquoteleft}turn-off{\textquoteright}{\textquoteright} (for L.Cd) fluorescence assay for evaluating the enzymatic activity of alkaline phosphatase (ALP). Experimental results revealed how the subtle differences in the binding affinities between PPi and M in L.M (M is Zn2+, Cd2+, and Cu2+), could influence the cleavage of the phosphoester linkage in PPi by ALP. The DFT calculations further revealed that the hydrolytic cleavage of the metal ion coordinated phosphoester bond is kinetically faster than that for free PPi and thus, rationalized the observed difference in the cleavage of the phosphoester bond by an important mammalian enzyme such as ALP in the presence of different metal complexes.

}, issn = {0020-1669}, doi = {10.1021/ic401243h}, author = {Das, Priyadip and Chandar, Nellore Bhanu and Chourey, Shishir and Agarwalla, Hridesh and Ganguly, Bishwajit and Das, Amitava} } @article { ISI:000326716300008, title = {Seasonal prediction of Indian summer monsoon in NCEP coupled and uncoupled model}, journal = {Theoretical and Applied Climatology}, volume = {114}, number = {3-4}, year = {2013}, month = {NOV}, pages = {459-477}, publisher = {SPRINGER WIEN}, address = {SACHSENPLATZ 4-6, PO BOX 89, A-1201 WIEN, AUSTRIA}, abstract = {

This study has identified probable factors that govern ISMR predictability. Furthermore, extensive analysis has been performed to evaluate factors leading to the predictability aspect of Indian Summer Monsoon Rainfall (ISMR) using uncoupled and coupled version of National Centers for Environmental Prediction Coupled Forecast System (CFS). It has been found that the coupled version (CFS) has outperformed the uncoupled version [Global Forecast System (GFS)] of the model in terms of prediction of rainfall over Indian land points. Even the spatial distribution of rainfall is much better represented in the CFS as compared to that of GFS. Even though these model skills are inadequate for the reliable forecasting of monsoon, it imparts the capacious knowledge about the model fidelity. The mean monsoon features and its evolution in terms of rainfall and large-scale circulation along with the zonal and meridional shear of winds, which govern the strength of the monsoon, are relatively closer to the observation in the CFS as compared to the GFS. Furthermore, sea surface temperature-rainfall relation is fairly realistic and intense in the coupled version of the model (CFS). It is found that the CFS is able to capture El Nio Southern Oscillation ISMR (ENSO-ISMR) teleconnections much strongly as compared to GFS; however, in the case of Indian Ocean Dipole ISMR teleconnections, GFS has the larger say. Coupled models have to be fine-tuned for the prediction of the transition of El Nio as well as the strength of the mature phase has to be improved. Thus, to sum up, CFS tends to have better predictive skill on account of following three factors: (a) better ability to replicate mean features, (b) comparatively better representation of air-sea interactions, and (c) much better portrayal of ENSO-ISMR teleconnections. This study clearly brings out that coupled model is the only way forward for improving the ISMR prediction skill. However, coupled model{\textquoteright}s spurious representation of SST variability and mean model bias are detrimental in seasonal prediction.

}, issn = {0177-798X}, doi = {10.1007/s00704-013-0854-8}, author = {Chaudhari, Hemantkumar S. and Pokhrel, Samir and Mohanty, Sachiko and Saha, Subodh K.} } @article { ISI:000329137400042, title = {Selective imaging of quorum sensing receptors in bacteria using fluorescent Au nanocluster probes surface functionalized with signal molecules}, journal = {ACS Applied Materials \& Interfaces}, volume = {5}, number = {24}, year = {2013}, month = {DEC}, pages = {13076-13081}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Fluorescent ultrasmall gold clusters decorated with bacterial quorum sensing signal molecules, acyl homoserine lactone, are synthesized. These fluorescent probes are found to have emission in the near-infrared spectral region advantageous for bioimaging. Imaging studies using different. strains of bacteria with and without acyl homoserine lactone receptors with the aid of confocal microscopy have shown that the probe interacts preferentially with cells possessing these receptors. This indicates that, with appropriate surface functionalization, the Au clusters can be used for receptor specific detection with enhanced selectivity.

}, keywords = {Au nanoclusters, Biosensor, fluorescence imaging, quorum sensing}, issn = {1944-8244}, doi = {10.1021/am404093m}, author = {Mukherji, Ruchira and Samanta, Anupam and Illathvalappil, Rajith and Chowdhury, Somak and Prabhune, Asmita and Devi, R. Nandini} } @article {43232, title = {Sensing behavior of atomically thin-layered MoS2 transistors}, journal = {ACS Nano}, volume = {7}, year = {2013}, month = {JUN}, pages = {4879-4891}, abstract = {Most of recent research on layered chalcogenides is understandably focused on single atomic layers. However, it is unclear if single-layer units are the most ideal structures for enhanced gas solid interactions. To probe this issue further, we have prepared large-area MoS2 sheets ranging from single to multiple layers on 300 nm SiO2/Si substrates using the micromechanical exfoliation method. The thickness and layering of the sheets were identified by optical microscope, invoking recently reported specific optical color contrast, and further confirmed by AFM and Raman spectroscopy. The MoS2 transistors with different thicknesses were assessed for gas-sensing performances with exposure to NO2, NH3, and humidity in different conditions such as gate bias and light Irradiation. The results show that, compared to the single-layer counterpart, transistors of few MoS2 layers exhibit excellent sensitivity, recovery, and ability to be manipulated by gate bias and green light. Further, our ab initio DFT calculations on single-layer and bilayer MoS2 show that the charge transfer is the reason for the decrease in resistance in the presence of applied field.}, doi = {10.1021/nn400026u}, author = {Late, Dattatray J. and Huang, Yi-Kai and Liu, Bin and Acharya, Jagaran and Shirodkar, Sharmila N. and Luo, Jiajun and Yan, Aiming and Charles, Daniel and Waghmare, Umesh V. and Dravid, Vinayak P. and Rao, C. N. R.} } @article { ISI:000323093300010, title = {Short synthesis of (2S,3S)-3-hydroxypipecolic acid}, journal = {Tetrahedron Letters}, volume = {54}, number = {36}, year = {2013}, month = {SEP}, pages = {4851-4853}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A convenient synthesis of (2S,3S)-3-hydroxypipecolic acid starting from cheap and abundant L-(+)-tartaric acid has been achieved. The strategy employs selective ester reduction and reductive lactamization as key steps. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Reductive lactamization, Selective deprotection, Wittig reaction}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2013.06.111}, author = {Chavan, Subhash P. and Harale, Kishor R. and Pawar, Kailash P.} } @article { ISI:000328335000013, title = {Simple synthesis of the novel antihistaminic drug olopatadine hydrochloride}, journal = {Synthesis-Stuttgart}, volume = {45}, number = {24}, year = {2013}, month = {DEC}, pages = {3399-3403}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A new alternative route for the synthesis of olopatadine is described. The present strategy involves a Lewis acid mediated ring opening of a cyclic ether to introduce 3-(dimethylamino)propylidene group as the side chain.

}, keywords = {antihistaminic drugs, chelates, Lewis acids, spiro compounds, zinc}, issn = {0039-7881}, doi = {10.1055/s-0033-1340008}, author = {Chavan, Subhash P. and Lasonkar, Pradeep B.} } @article { ISI:000314743000016, title = {Solvent-free, highly efficient one-pot multi-component synthesis of 1-amido- and 1-carbamato-alkyl naphthols/phenols catalyzed by ethylammonium nitrate as reusable ionic liquid under neat reaction condition at ambient temperature}, journal = {Tetrahedron Letters}, volume = {54}, number = {7}, year = {2013}, month = {FEB}, pages = {672-675}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A solvent-free, environmentally clean, mild, and simple one-pot multi-component protocol has been developed for the efficient synthesis of 1-amido- and 1-carbamato-alkyl naphthols/phenols in excellent yields via one-pot three-component condensation of various aldehydes, amides/carbamates/urea, and naphthols/phenols using ethylammonium nitrate (EAN) as a reusable ionic liquid catalyst under neat reaction condition at ambient temperature. (c) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Aldehyde, amide, Carbamate Phenol, Ethylammonium nitrate (EAN), Urea}, issn = {0040-4039}, doi = {10.1016/j.tetlet2012.12.004}, author = {Mulla, Shafeek Abdul Rashid and Salama, Tarek A. and Pathan, Mohsinkhan Y. and Inamdar, Suleman M. and Chavan, Santosh S.} } @article { ISI:000314193500042, title = {Spatial and temporal changes in the volatile profile of alphonso mango upon exogenous ethylene treatment}, journal = {Food Chemistry}, volume = {136}, number = {2}, year = {2013}, month = {JAN}, pages = {585-594}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Alphonso is a highly favoured and exported mango cultivar among the vast mango germplasm of India. Being a climacteric fruit, ethylene plays an important role in ripening of mango. For deeper understanding of effect of pre-climacteric ethylene treatment on volatile profiles of Alphonso mango, 26 volatiles were tracked through six ripening stages of pulp and skin of ethylene-treated and control Alphonso fruits. The study revealed accelerated ripening in terms of early appearance of ripening-specific compounds, lactones and mesifuran, upon ethylene treatment. While the level of lactones remained unaffected, the mesifuran level vastly increased upon ethylene treatment. Skin showed high terpene content while pulp had higher amount of lactones compared to skin. This work points towards involvement of ethylene as a natural hormone in the biosynthesis of lactones and furanones in naturally ripened fruits; whereas, an increase in the terpene level during ripening appears to be independent of ethylene. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Ethylene, Flavour, Mango, Pre-climacteric, Ripening, Volatiles}, issn = {0308-8146}, doi = {10.1016/j.foodchem.2012.08.029}, author = {Chidley, Hemangi G. and Kulkarni, Ram S. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article { ISI:000313896900021, title = {Structural and dynamical properties of polyethylenimine in explicit water at different protonation states: a molecular dynamics study}, journal = {Soft Matter}, volume = {9}, number = {7}, year = {2013}, month = {JAN}, pages = {2269-2281}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

PEI is a pH sensitive polymer which acts as a proton sponge in acidic conditions. Despite many experimental and theoretical efforts, a fundamental understanding of the structure and dynamics of linear PEI chains on the atomistic level at different protonation states in dilute solutions remains a topic of discussion. This report analyses the structural properties of PEI at different protonation states, which are representative of different pH, using all atomistic molecular dynamic simulations. The structural properties revealed that the polymer at high pH (basic medium) is highly coiled, while at low pH (strong acidic conditions) the chains are elongated. We studied the dynamics and ordering of water molecules that are part of the solvation shells of the PEI chains at different protonation states. We observe that the water molecules are ordered along the polymer backbone for a completely protonated PEI chain (i.e. in the case of acidic pH) and hop to the neighbouring solvation shell. The residence time and the self-diffusion of water molecules in the solvation shells and their activation barriers were also calculated and analysed further. We concluded the study by correlating the solvation shell water dynamics and the structure of the PEI chain at different protonation states.

}, issn = {1744-683X}, doi = {10.1039/c2sm26290h}, author = {Choudhury, Chandan Kumar and Roy, Sudip} } @article { ISI:000325211000079, title = {Structural and logical analysis of a comprehensive hedgehog signaling pathway to identify alternative drug targets for glioma, colon and pancreatic cancer}, journal = {Plos One}, volume = {8}, number = {7}, year = {2013}, month = {JUL}, pages = {e69132}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Hedgehog is an evolutionarily conserved developmental pathway, widely implicated in controlling various cellular responses such as cellular proliferation and stem cell renewal in human and other organisms, through external stimuli. Aberrant activation of this pathway in human adult stem cell line may cause different types of cancers. Hence, targeting this pathway in cancer therapy has become indispensable, but the non availability of detailed molecular interactions, complex regulations by extra- and intra-cellular proteins and cross talks with other pathways pose a serious challenge to get a coherent understanding of this signaling pathway for making therapeutic strategy. This motivated us to perform a computational study of the pathway and to identify probable drug targets. In this work, from available databases and literature, we reconstructed a complete hedgehog pathway which reports the largest number of molecules and interactions to date. Using recently developed computational techniques, we further performed structural and logical analysis of this pathway. In structural analysis, the connectivity and centrality parameters were calculated to identify the important proteins from the network. To capture the regulations of the molecules, we developed a master Boolean model of all the interactions between the proteins and created different cancer scenarios, such as Glioma, Colon and Pancreatic. We performed perturbation analysis on these cancer conditions to identify the important and minimal combinations of proteins that can be used as drug targets. From our study we observed the under expressions of various oncoproteins in Hedgehog pathway while perturbing at a time the combinations of the proteins GLI1, GLI2 and SMO in Glioma; SMO, HFU, ULK3 and RAS in Colon cancer; SMO, HFU, ULK3, RAS and ERK12 in Pancreatic cancer. This reconstructed Hedgehog signaling pathway and the computational analysis for identifying new combinatory drug targets will be useful for future in-vitro and in-vivo analysis to control different cancers.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0069132}, author = {Chowdhury, Saikat and Pradhan, Rachana N. and Sarkar, Ram Rup} } @article { ISI:000312452700005, title = {Structure-property relationship of different types of polyester industrial yarns}, journal = {Journal of the Textile Institute}, volume = {104}, number = {1}, year = {2013}, month = {JAN}, pages = {35-45}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Four major types of polyester industrial yarns (1000 Denier) which are used commercially were studied for their key structural parameters. An attempt has been made to establish a relationship between morphology and properties of these yarns. High tenacity (HT) polyester yarn has the highest birefringence, amorphous orientation, and long period but is relatively less crystalline. High shrinkage characteristic of HT polyester yarn can be accounted for its higher amorphous orientation. High modulus low shrinkage (HMLS) polyester yarn has higher crystallinity and crystal size compared to HT yarn. Fraction of tie molecules of these yarns has been calculated and found that low shrinkage (LS) and super low shrinkage (SLS) yarns have lesser tie molecules. These LS and SLS yarns are tailor-made to achieve lower shrinkage and at the same time maintaining a good level of tenacity. This is achieved with lower amorphous orientation in the final drawn yarn structure. Amorphous orientation was found to have stronger influence than any other structural parameter on the key yarn properties like modulus, tenacity, elongation, and shrinkage.

}, keywords = {modulus, orientation, polyester, shrinkage, structure}, issn = {0040-5000}, doi = {10.1080/00405000.2012.693277}, author = {Samui, Barun Kumar and Prakasan, Manikanda Priya and Ramesh, C. and Chakrabarty, Debabrata and Mukhopadhyay, R.} } @article { ISI:000326056600079, title = {Surfactant-free synthesis of anisotropic gold nanostructures: can dicarboxylic acids alone act as shape directing agents?}, journal = {RSC Advances}, volume = {3}, number = {44}, year = {2013}, month = {AUG}, pages = {21641-21647}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The present study describes the synthesis of gold nanostructures using different dicarboxylic (viz. oxalic, malonic, succinic, glutaric and adipic) acids as reducing agents in the absence of any other additives or surfactants. Various anisotropic structures such as kites, tadpoles, triangular/hexagonal plates, and twinned particles were seen to evolve depending on the molar ratio of dicarboxylic acid to HAuCl4 used. It was also demonstrated that gold nanostructure formation is hampered as the chain length/distance between two carboxylic acid groups increases. Among the various structures obtained the kite like structures displayed the largest surface enhanced Raman enhancement factors.

}, issn = {2046-2069}, doi = {10.1039/c3ra43974g}, author = {Kumar, D. V. Ravi and Kumavat, S. R. and Chamundeswari, V. N. and Patra, Partha Pratim and Kulkarni, A. A. and Bhagavatula L. V. Prasad} } @article { ISI:000318332300017, title = {Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acids over gold nano-particles supported on MgO (or CaO) and other metal oxides}, journal = {Journal of Catalysis}, volume = {301}, year = {2013}, month = {MAY}, pages = {134-140}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Gold nano-particles-supported alkaline earth metal oxides, particularly MgO or CaO, show high catalytic activity in the Suzuki-Miyaura cross-coupling reaction in the presence of K2CO3 and DMF (as a solvent). The catalytic activity is strongly influenced by the nature or type of metal oxide support (viz, alkaline earth oxide, Group IIIA metal oxide, transition metal oxide, or rare earth oxide actinide oxide). It is also strongly influenced by the nature of aryl halide (aryl iodide, bromide, chloride, or fluoride), amount of K2CO3 in the reaction mixture and catalyst calcination temperature. Influence of reaction parameters viz, temperature and time and different substituents in aryl halides and/or phenylboronic acids on the biphenyl product yield in the reaction over Au/MgO catalyst has also been investigated. The catalyst showed excellent reusability in the reaction. Moreover, it is ligand-free and also has much lower cost than the commonly used homogeneous and heterogeneous Pd catalysts. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Aryl halides, Au/MgO (or CaO) catalyst, Biphenyls, Gold nano-particles, phenylboronic acids, Suzuki-Miyaura coupling reaction}, issn = {0021-9517}, doi = {10.1016/j.jcat.2013.01.012}, author = {Dumbre, Deepa K. and Yadav, P. N. and Bhargava, Suresh Kumar and Choudhary, Vasant R.} } @article { ISI:000317094300015, title = {Synthesis, structure, and H-2/CO2 adsorption in a three-dimensional 4-connected triorganotin coordination polymer with a sqc topology}, journal = {Inorganic Chemistry}, volume = {52}, number = {7}, year = {2013}, month = {APR}, pages = {3579-3581}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A 4-connected triorganotin 3D coordination polymer in a sqc topology has been shown to possess 1D microchannels along its crystallographic a axis. This main-group-element-containing framework structure shows selective gas adsorption, preferring CO2 and H-2 over N-2.

}, issn = {0020-1669}, doi = {10.1021/ic302528b}, author = {Chandrasekhar, Vadapalli and Mohapatra, Chandrajeet and Banerjee, Rahul and Mallick, Arijit} } @article { ISI:000335434600004, title = {Thermoresponsive and biodegradable dextran based microgels: synthesis and structural investigation}, journal = {Macromolecular Symposia}, volume = {329}, number = {1}, year = {2013}, note = {Polymer Networks Conference (PNG), WY, AUG 12-16, 2012}, month = {JUL}, pages = {27-34}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Nanostructured objects, often ranging from hundreds of nanometers to few microns, support a number of functions directly linked to their structural features. They are, or they will be, protagonists in biomedical applications where miniaturized activities are required. These include the interface with living systems as tissues and cells, where targeted release of drug molecules occurs, or molecular imaging methods monitoring the drug trafficking in specific cell districts. The potentials of such devices, far to be fully understood, will be assessed only when a close correlation of their functions with their structure will be established. In this contribution we present a dextran based microdevice responsive to temperature and biodegradable. Both thermoresponsivity and biodegradability are of relevance for the potential use as drug carrier and controlled release device. The temperature behaviour, overall structure and internal architectures have been addressed with different methods.

}, keywords = {Biomaterials, colloids, dynamic light scattering, hydrogels, p(NiPAAm)}, issn = {1022-1360}, doi = {10.1002/masy.201300009}, author = {Ghugare, Shivkumar V. and Chiessi, Ester and Sakai, Victoria Garcia and Telling, Mark T. F. and Wadgaonkar, Prakash P. and Paradossi, Gaio} } @article { ISI:000321573300021, title = {Total synthesis of umuravumbolide and hyptolide through silicon-tethered ring-closing metathesis}, journal = {European Journal of Organic Chemistry}, volume = {2013}, number = {21}, year = {2013}, month = {JUL}, pages = {4586-4593}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The total synthesis of umuravumbolide and hyptolide has been achieved in a efficient manner by using temporary silicon-tethered ring-closing metathesis and cross-coupling reactions as key steps. The stereogenic centres were generated by means of proline-catalysed -aminoxylation of aldehydes and Brown{\textquoteright}s asymmetric allylation method.

}, keywords = {lactones, Metathesis, Silanes, synthetic methods, Total synthesis, Wittig reactions}, issn = {1434-193X}, doi = {10.1002/ejoc.201300302}, author = {Chowdhury, Partha Sarathi and Kumar, Pradeep} } @article { ISI:000336840900022, title = {9-Fluorenemethanol: an internal electron donor to fine tune olefin polymerization activity}, journal = {Dalton Transactions}, volume = {43}, number = {24}, year = {2014}, month = {MAR}, pages = {9143-9151}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new MgCl2 based molecular adduct has been synthesized with 9-fluorenemethanol (9FM) as a novel internal electron donor (IED), along with ethanol (EtOH) (MgCl2 center dot n9FM center dot xEtOH). The above molecular adduct has been subjected to a variety of structural, spectroscopic and morphological characterization techniques. The results of the solid state C-13 CPMAS NMR technique suggests the coordination of 9FM to MgCl2. Observation of a low angle diffraction peak at 2 theta = 5.7 degrees (d = 15.5 angstrom) underscores the coordination of 9FM along the z-axis, and ethanol in the molecular adduct. Active Ziegler-Natta catalysts were prepared by two different synthesis methods; the conventional method to obtain a high surface area active catalyst, and other one with 9FM as an integral part of the active catalyst in order to study the influence of 9FM as an IED over the active sites. The active catalysts were also characterized thoroughly with different analytical tools. The XRD results show (003) facets of delta-MgCl2 (alpha-MgCl2) for the conventional (non-conventional) titanated catalyst. Results of the ethylene polymerization activity study reveals that the conventionally prepared highly porous active catalyst shows 1.7-2.5 times higher activity than the non-conventional prepared catalyst; however, the latter shows a low molecular weight distribution and confirms the role of the Lewis base as an IED.

}, issn = {1477-9226}, doi = {10.1039/c4dt00793j}, author = {Gnanakumar, Edwin S. and Chokkapu, Eswara Rao and Kunjir, Shrikant and Ajithkumar, Thalasseril G. and Rajamohanan, P. R. and Chakraborty, Debashis and Gopinath, Chinnakonda S.} } @article {46399, title = {Additive induced capture of elusive polymorphs of conformationally flexible Sulfonamides/Sulfoesters}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C776}, type = {Meeting Abstract}, keywords = {additive induced polymorphism, intermolecular interactions, phase transition}, issn = {2053-2733}, author = {Shaikh, Samir Rashid and Gawade, Rupesh L. and Chakravarty, Debamitra K. and Puranik, Vedavati G. and Gonnade, Rajesh} } @article { ISI:000340300300018, title = {Antifungal activity and mechanism of action of carvacrol and thymol against vineyard and wine spoilage yeasts}, journal = {Food Control}, volume = {46}, year = {2014}, month = {DEC}, pages = {115-120}, publisher = {ELSEVIER SCI LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Antimicrobial activity of carvacrol and thymol against natural yeast flora of the grapes and yeasts known to cause wine spoilage was examined. Carvacrol and thymol exhibited comparable or better antifungal activity than potassium metabisulphite, commercially used wine preservative, against the natural yeast flora and spoilage yeasts. The antifungal activity for both the compounds was better at pH 3.5 than pH 6.5. Addition of carvacrol and thymol (64 mu g/mL) in red wine resulted in inhibition of growth of the spoilage yeasts. Carvacrol and thymol exerted their antimicrobial action through membrane damage, leakage of cytoplasmic content and ergosterol depletion. In conclusion, carvacrol and thymol holds promise as a potential natural preservative for the control of wine spoilage. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {antifungal, Carvacrol, Thymol, Wine spoilage}, issn = {0956-7135}, doi = {10.1016/j.foodcont.2014.05.007}, author = {Chavan, Pradnya S. and Tupe, Santosh G.} } @article { ISI:000333939500005, title = {Antifungal dimeric chalcone derivative kamalachalcone E from Mallotus philippinensis}, journal = {Natural Product Research}, volume = {28}, number = {4}, year = {2014}, month = {FEB}, pages = {245-250}, publisher = {TAYLOR \& FRANCIS LTD}, type = {Article}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

From the red coloured extract (Kamala) prepared through acetone extraction of the fresh whole uncrushed fruits of Mallotus philippinensis, one new dimeric chalcone (1) along with three known compounds 1-(5,7-dihydroxy-2,2,6-trimethyl-2H-1-benzopyran-8-yl)-3-phenyl-2-propen -1-one (2), rottlerin (3) and 4 {\textquoteleft}-hydroxyrottlerin (4) were isolated. The structure of compound 1 was elucidated by 1D and 2D NMR analyses that included HSQC, HMBC, COSY and ROESY experiments along with the literature comparison. Compounds 1-4 were evaluated for antifungal activity against different human pathogenic yeasts and filamentous fungi. The antiproliferative activity of the compounds was evaluated against Thp-1 cell lines. Compounds 1 and 2 both exhibited IC50 of 8, 4 and 16 mu g/mL against Cryptococcus neoformans PRL518, C. neoformans ATCC32045 and Aspergillus fumigatus, respectively. Compound 4, at 100 mu g/mL, showed 54\% growth inhibition of Thp-1 cell lines.

}, keywords = {4 {\textquoteleft}-hydroxyrottlerin, antifungal, dimeric chalcone, kamalachalcone E, Mallotus philippinensis, rottlerin}, issn = {1478-6419}, doi = {10.1080/14786419.2013.843178}, author = {Kulkarni, Roshan R. and Tupe, Santosh G. and Gample, Suvarna P. and Chandgude, Macchindra G. and Sarkar, Dhiman and Deshpande, Mukund V. and Joshi, Swati P.} } @article {43308, title = {Antimicrobial activity of a new series of Bis(isoxazoline),Bis(isoxazole)and their derivatives}, journal = {International Journal of Chemical and Physical Sciences}, volume = {1}, year = {2014}, month = {JAN}, pages = {1-4}, type = {Article}, abstract = {

A series of 1,1-bis [2-hydroxy-3-(5{\textquoteright}-aryl-isoxazoline-3-yl)-5-methyl phenyl] methane and 1,1-bis [2-hydroxy-3-(5{\textquoteright}-aryl-isoxazol-3-yl)-5-methyl phenyl] methane derivatives were evaluated for their antimicrobial activity against some selected pathogenic micro-organisms such as Gram-positive bacteria, Staphylococcus aureus, Citrobacter frundii, Bacillus megatherium and Gram-negative bacteria Staphyloccus aureus, Escherichia coli, Proteus mirabilis, Pseudomonas aeruginosa, Enterobacter aerogenes, Salmonella typhi, Proteus vulgaris.

}, author = {Gajbhiye, Jayant M. and Chopade, A. U.} } @article { ISI:000334682700018, title = {Antimicrobial and SEM studies of sophorolipids synthesized using lauryl alcohol}, journal = {Journal of Surfactants and Detergents}, volume = {17}, number = {3}, year = {2014}, month = {MAY}, pages = {543-552}, publisher = {SPRINGER HEIDELBERG}, type = {Article}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

In recent years, researchers have developed biosurfactants for industrial, pharmaceutical and medical applications revealing the promising biological activities of these biomolecules. One of the best studied microbial surfactants are glycolipids, especially sophorolipids (SLs) produced by selected non-pathogenic yeast species of Candida. They are biodegradable, non-toxic and are environmentally friendly. Sophorolipid production was carried out using glucose as the hydrophilic source and lauryl alcohol C12-14, as the hydrophobic source using Candida bombicola ATCC 22214. Primary characterization of the SL obtained using lauryl alcohol (SLLA) was done by FTIR which depicted the presence of alkyl sophorosides/SLs. Antimicrobial activity testing revealed that SLLA showed complete inhibition against gram negative bacteria, Escherichia coli (ATCC 8739) Pseudomonas aeruginosa (ATCC 9027) at 30 and 1 mu g/ml at a contact time of 2 and 4 h respectively. Whereas for gram positive bacteria Staphylococcus aureus (ATCC 6358), Bacillus subtilis (ATCC 6633), complete inhibition was observed at 6 and 1 mu g/ml respectively at a contact time of 4 h. The formed SLLA showed noteworthy inhibition against the pathogenic yeast Candida albicans (ATCC 2091) at 50 mu g/ml with a contact time of 4 h. These values are remarkably low compared to reported values of oleic acid SLs and linolenic acid SLs which were studied for antimicrobial properties. Scanning electron microscopy analysis of the treated cells revealed the changes in morphology and topography of the microorganisms.

}, keywords = {Antimicrobial property, Biosurfactants, Candida bombicola, Lauryl alcohol, sophorolipids}, issn = {1097-3958}, doi = {10.1007/s11743-013-1495-8}, author = {Dengle-Pulate, Vrushali and Chandorkar, Parul and Bhagwat, Sunil S. and Prabhune, Asmita Ashutosh} } @article { ISI:000346322200010, title = {Artificial intelligence-based modeling of high ash coal gasification in a pilot plant scale fluidized bed gasifier}, journal = {Industrial \& Engineering Chemistry Research }, volume = {53}, number = {49}, year = {2014}, month = {DEC}, pages = {18678-18689}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The quality of coalespecially its high ash contentsignificantly affects the performance of coal-based processes. Coal gasification is a cleaner and an efficient alternative to the coal combustion for producing the syngas. The high-ash coals are found in a number of countries, and they form an important source for the gasification. Accordingly, in this study, extensive gasification experiments were conducted in a pilot-plant scale fluidized-bed coal gasifier (FBCG) using high-ash coals from India. Specifically, the effects of eight coal and gasifier process related parameters on the four gasification performance variables, namely CO+H-2 generation rate, syngas production rate, carbon conversion, and heating value of the syngas, were rigorously studied. The data collected from these experiments were used in the FBCG modeling, which was conducted by utilizing two artificial intelligence (AI) strategies namely genetic programming (GP) and artificial neural networks (ANNs). The novelty of the GP formalism is that it searches and optimizes both the form and parameters of an appropriate linear/nonlinear function that best fits the given process data. The original eight-dimensional input space of the FBCG models was reduced to three-dimensional space using the principal component analysis (PCA) and the PCA-transformed three variables were used in the AI-based FBCG modeling. A comparison of the GP and ANN-based models reveals that their output prediction accuracies and the generalization performance vary from good to excellent as indicated by the high training and test set correlation coefficient magnitudes lying between 0.92 and 0.996. This study also presents results of the sensitivity analysis performed to identify those coal and process related parameters, which significantly affect the FBCG process performance.

}, issn = {0888-5885}, doi = {10.1021/ie500593j}, author = {Patil-Shinde, Veena and Kukarni, Tejas and Kulkarni, Rahul and Chavan, Prakash D. and Sharma, Tripurari and Sharma, Bijay Kumar and Tambe, Sanjeey S. and Kulkarni, B. D.} } @article { ISI:000327915300016, title = {Calcium oxide supported gold nanoparticles as catalysts for the selective epoxidation of styrene by t-butyl hydroperoxide}, journal = {Journal of Colloid and Interface Science}, volume = {415}, year = {2014}, month = {FEB}, pages = {111-116}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Gold nanoparticles are deposited on basic CaO supports as catalysts for the selective conversion of styrene into styrene oxide. Synthetic methods, gold loading and calcination temperatures are varied to permit an understanding of their influence on gold nanoparticle size, the presence of cationic gold species and the nature of interaction between the gold nanoparticles and the CaO support. Based on these studies, optimal conditions are designed to make the Au/CaO catalyst efficient for the selective epoxidation of styrene. (C) 2013 Elsevier Inc. All rights reserved.

}, keywords = {Au/CaO, Epoxidation of styrene, gold nanoparticles, Homogenous deposition precipitation method, Styrene oxide}, issn = {0021-9797}, doi = {10.1016/j.jcis.2013.10.016}, author = {Dumbre, Deepa K. and Choudhary, Vasant R. and Patil, Nilesh S. and Uphade, Balu S. and Bhargava, Suresh Kumar} } @article { ISI:000330143000008, title = {CdS nanowires: ultra-long growth and enhanced field emission properties}, journal = {Vaccum}, volume = {101}, number = {SI}, year = {2014}, month = {MAR}, pages = {38-45}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Here, we report the synthesis of ultra-long CdS nanowires with aspect ratio similar to 8 x 10(4) by simple route of thermal evaporation technique. A change in the vertical arrangement of quartz boats leads in to the synthesis of ultra-long CdS nanovvires via high degree of condensation. This technique is seen to be cost effective and easy. The growth of the nanowires is found to be increased very rapidly from few micrometers to few millimeters. The possible reason for the growth of the ultra-long CdS nanowires is discussed in detail. The turn-on field defined for the current density of similar to 0.1 mu A/cm(2) has been found to be similar to 1.4, 1.45, 1 and 0.17 V/mu m for specimen A, B, C and D (specimens A-D, synthesized by variation in synthesis parameters) respectively. The turn-on field of the specimen D (similar to 0.17 V/mu m) is found to be quite superior than the value reported for other CdS nanoforms which is very remarkable. Simple way of bulk fabrication leads to the low turn-on value which indicates a possible use of the present emitter in the micro/nanoelectronics devices. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Current stability, field emission, synthesis}, issn = {0042-207X}, doi = {10.1016/j.vacuum.2013.07.019}, author = {Chavan, Padmakar G. and Kashid, Ranjit V. and Badhade, Satish S. and Mulla, Imtiaz S. and More, Mahendra A. and Joag, Dilip S.} } @article { ISI:000342161600057, title = {Cellulose supported cuprous iodide nanoparticles (Cell-CuI NPs): a new heterogeneous and recyclable catalyst for the one pot synthesis of 1,4-disubstituted-1,2,3-triazoles in water}, journal = {RSC Advances}, volume = {4}, number = {79}, year = {2014}, month = {SEP}, pages = {42137-42146}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Cellulose supported cuprous iodide nanoparticles (Cell-CuI NPs) have been demonstrated for the first time as an efficient heterogeneous catalyst in the click synthesis of 1,4-disubstituted 1,2,3-triazoles by a one-pot three component reaction between aralkyl/alkyl bromides, alkynes and sodium azide in water. The catalyst has been characterized by XRD, HRTEM, SEM, ICP-AES, EDS as well as IR spectroscopy. It was found to be reusable for five consecutive runs without significant loss of activity.

}, issn = {2046-2069}, doi = {10.1039/c4ra05080k}, author = {Chavan, Pramod V. and Pandit, Kapil S. and Desai, Uday V. and Kulkarni, Makarand A. and Wadgaonkar, Prakash P.} } @article { ISI:000340703000039, title = {CH3NH3PbI(3-x)(BF4)(x): molecular ion substituted hybrid perovskite}, journal = {Chemical Communications}, volume = {50}, number = {68}, year = {2014}, month = {SEP}, pages = {9741-9744}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A molecular ion (BF4-) substituted hybrid perovskite CH3NH3PbI(3-x)(BF4)(x) is synthesized. The substituted perovskite shows significant enhancement in electrical conductivity at low frequencies and improved photoresponse under AM1.5 illumination as compared to the perovskite (CH3NH3PbI3).

}, issn = {1359-7345}, doi = {10.1039/C4CC04537H}, author = {Nagane, Satyawan and Bansode, Umesh P. and Game, Onkar S. and Chhatre, Shraddha and Ogale, Satishchandra} } @article { ISI:000347602400004, title = {Chemoselective deprotection of N-allylic amines using DDQ}, journal = {Tetrahedron Letters}, volume = {55}, number = {52}, year = {2014}, month = {DEC}, pages = {7172-7176}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A highly chemoselective and simple method for the deprotection of N-allylic amines using DDQ has been developed. The use of DDQ in dichloromethane-water provides a mild and efficient one-step deallylation of a wide variety of orthogonally protected tertiary amine derivatives. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Chemoselective deprotection, DDQ, N-Allylic amines, Orthogonally protected tertiary amines}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.10.136}, author = {Kumar, Pradeep and Cherian, Shijo K. and Jain, Ruchi and Show, Krishanu} } @article { ISI:000344825300009, title = {Chiron approach to formal synthesis of both antipodes of cis 3-hydroxypipecolic acid}, journal = {Tetrahedron Letters}, volume = {55}, number = {47}, year = {2014}, month = {NOV}, pages = {6423-6426}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The efficient and practical formal syntheses of both enantiomers of cis 3-hydroxypipecolic acid were accomplished from cis aziridine-2-carboxylate as the common synthetic precursor. The key steps involved are stereo and regioselective aziridine ring opening, reductive cyclization and selective N-debenzylation over O-debenzylation reactions. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {3-Hydroxypipecolic acid, Aziridine ring opening, Aziridine-2-carboxylate, Piperidine alkaloids, Selective debenzylation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.09.118}, author = {Chavan, Subhash P. and Khairnar, Lalit B. and Chavan, Prakash N. and Dumare, Nilesh B. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article { ISI:000331624700039, title = {Chitosan and chitosan-co-poly(epsilon-caprolactone) grafted multiwalled carbon nanotube transducers for vapor sensing}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {14}, number = {3}, year = {2014}, month = {MAR}, pages = {2425-2435}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Vapor sensitive transducer films consisting of chitosan grafted (CNT-CS) and chitosan-co-polycaprolactone grafted (CNT-CS-PCL) multiwalled carbon nanotubes were prepared using a spray layer-by-layer technique. The synthesized materials (CNT-CS and CNT-CS-PCL) were characterized by Fourier transform infrared spectroscopy, C-13 CP/MAS solid state nuclear magnetic resonance spectroscopy and thermogravimetric analysis. Both CNT-CS and CNT-CS-PCL transducers were analyzed for the response of volatile organic compounds and toluene vapors. The ranking of the relative resistance (A(r)) for both chitosan based transducers were as follows: toluene \< chloroform \< ethanol \< methanol. The CNT transducer (CNT-CS) was correlated selectively with an exponential law to the inverse of Flory-Huggins interaction parameters, chi(12). Dosing the films on the interdigitated electrodes with methanol, ethanol, chloroform and toluene vapors increased the film resistance of CNT-CS but decreased the resistance of CNT-CS-PCL compared to that of the reported transducers.

}, keywords = {Biocompatibility, Chitosan, MWCNTs, Poly(epsilon-caprolactone), Vapour Sensing}, issn = {1533-4880}, doi = {10.1166/jnn.2014.8498}, author = {Rana, Vijay Kumar and Akhtar, Shamim and Chatterjee, Sudipta and Mishra, Satyendra and Singh, Raj Pal and Ha, Chang-Sik} } @article { ISI:000342018100001, title = {Cholesterol depletion by methyl-beta-cyclodextrin augments tamoxifen induced cell death by enhancing its uptake in melanoma}, journal = {Molecular Cancer}, volume = {13}, year = {2014}, month = {SEP}, pages = {Article No. 204}, publisher = {BIOMED CENTRAL LTD}, type = {Article}, address = {236 GRAYS INN RD, FLOOR 6, LONDON WC1X 8HL, ENGLAND}, abstract = {

Background: Despite modern advances in treatment, skin cancer is still one of the most common causes of death in the western countries. Chemotherapy plays an important role in melanoma management. Tamoxifen has been used either alone or in-combination with other chemotherapeutic agents to treat melanoma. However, response rate of tamoxifen as a single agent has been comparatively low. In the present study, we investigated whether treatment with methyl-beta-cyclodextrin (MCD), a cholesterol depleting agent, increases the efficacy of tamoxifen in melanoma cells. Methods: This was a two-part study that incorporated in vitro effects of tamoxifen and MCD combination by analyzing cell survival, apoptosis and cell cycle analysis and in vivo antitumor efficacy on tumor isografts in C57BL/6J mice. Results: MCD potentiated tamoxifen induced anticancer effects by causing cell cycle arrest and induction of apoptosis. Sensitization to tamoxifen was associated with down regulation of antiapoptotic protein Bcl-2, up-regulation of proapoptotic protein Bax, reduced caveolin-1 (Cav-1) and decreased pAkt/pERK levels. Co-administration of tamoxifen and MCD caused significant reduction in tumor volume and tumor weight in mice due to enhancement of drug uptake in the tumor. Supplementation with cholesterol abrogated combined effect of tamoxifen and MCD. Conclusion: Our results emphasize a potential synergistic effect of tamoxifen with MCD, and therefore, may provide a unique therapeutic window for improvement in melanoma treatment.

}, keywords = {Caveolin-1, Cholesterol, Methyl beta-cyclodextrin, Tamoxifen}, issn = {1476-4598}, doi = {10.1186/1476-4598-13-204}, author = {Mohammad, Naoshad and Malvi, Parmanand and Meena, Avtar Singh and Singh, Shivendra Vikram and Chaube, Balkrishna and Vannuruswamy, Garikapati and Kulkarni, Mahesh J. and Bhat, Manoj Kumar} } @article { ISI:000333226900011, title = {Cholesterol modulates the dimer interface of the beta(2)-adrenergic receptor via cholesterol occupancy sites}, journal = {Biophysical Journal}, volume = {106}, number = {6}, year = {2014}, month = {MAR}, pages = {1290-1300}, publisher = {CELL PRESS}, type = {Article}, address = {600 TECHNOLOGY SQUARE, 5TH FLOOR, CAMBRIDGE, MA 02139 USA}, abstract = {

The beta(2)-adrenergic receptor is an important member of the G-protein-coupled receptor (GPCR) superfamily, whose stability and function are modulated by membrane cholesterol. The recent high-resolution crystal structure of the beta(2)-adrenergic receptor revealed the presence of possible cholesterol-binding sites in the receptor. However, the functional relevance of cholesterol binding to the receptor remains unexplored. We used MARTINI coarse-grained molecular-dynamics simulations to explore dimerization of the beta(2)-adrenergic receptor in lipid bilayers containing cholesterol. A novel (to our knowledge) aspect of our results is that receptor dimerization is modulated by membrane cholesterol. We show that cholesterol binds to transmembrane helix IV, and cholesterol occupancy at this site restricts its involvement at the dimer interface. With increasing cholesterol concentration, an increased presence of transmembrane helices I and II, but a reduced presence of transmembrane helix IV, is observed at the dimer interface. To our knowledge, this study is one of the first to explore the correlation between cholesterol occupancy and GPCR organization. Our results indicate that dimer plasticity is relevant not just as an organizational principle but also as a subtle regulatory principle for GPCR function. We believe these results constitute an important step toward designing better drugs for GPCR dimer targets.

}, issn = {0006-3495}, doi = {10.1016/j.bpj.2014.02.002}, author = {Prasanna, Xavier and Chattopadhyay, Amitabha and Sengupta, Durba} } @article { ISI:000333724000022, title = {Combined gasification of lignite coal: thermodynamic and application study}, journal = {Journal of the Taiwan Institute of Chemical Engineers}, volume = {45}, number = {1}, year = {2014}, month = {JAN}, pages = {163-173}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Combined gasification (a combination of steam gasification and CO2 gasification) without air is an important process for research in coal gasification to reduce the steam generation energy in the gasification system and also to enhance the slow CO2 gasification reaction. A thermodynamic study involving the effect of temperature, pressure and feed CO2 and steam ratios in gasification of lignite coal was studied in this paper. The product generation trends of syngas and methane with carbon (in coal) conversion were studied in detail. The carbon (in lignite coal) was converted completely at a lower temperature than pure carbon in the combined gasification. Some applications of the gasifier product gas were also studied. Combined gasification offers great advantages to produce syngas of exact ratio in one step for use in petrochemical manufacture and fuel cell systems. The complete carbon (in coal) conversion occurred beyond the thermoneutral gasification temperature in the study. The combined gasification process was a useful way for CO2 utilization reducing the net CO2 emission to the atmosphere. (C) 2013 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

}, keywords = {CO2 utilization, Coal gasification, Coal to syngas, Combined gasification, Thermodynamic study}, issn = {1876-1070}, doi = {10.1016/j.jtice.2013.04.015}, author = {Kale, Ganesh R. and Kulkarni, Bhaskar D. and Chavan, Rank N.} } @article { ISI:000328606500015, title = {Concise enantioselective syntheses of (+)-L-733,060 and (2S,3S)-3-hydroxypipecolicw acid by cobalt(III)(salen)-catalyzed two-stereocenter hydrolytic kinetic resolution of racemic azido epoxides}, journal = {Synlett}, volume = {25}, number = {1}, year = {2014}, month = {JAN}, pages = {102-104}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

An efficient synthesis of the 2,3-disubstituted piperidines (+)-L-733,060 and (2S,3S)-3-hydroxypipecolic acid (99\% ee) in high optical purity from commercially available starting materials is described. The strategy involves a cobalt-catalyzed hydrolytic kinetic resolution of a racemic azido epoxide with two stereocenters and an intramolecular reductive cyclization as key reactions.

}, keywords = {azides, cyclizations, epoxides, piperidines, stereoselective synthesis, Wittig reactions}, issn = {0936-5214}, doi = {10.1055/s-0033-1340074}, author = {Devalankar, Dattatray A. and Chouthaiwale, Pandurang V. and Sudalai, Arumugam} } @article {45960, title = {Concise synthetic approach toward tamiflu (oseltamivir phosphate): cis-aziridine as the key synthon and RCM}, journal = {RSC Advances}, volume = {4}, year = {2014}, month = {FEB}, pages = {11417-11419}, type = {Article}, abstract = {A synthesis of oseltamivir (Tamiflu) was achieved starting from D-mannitol. A unique feature of the synthetic route is that an acyclic precursor was constructed, which was then cyclized in an intramolecular aldol reaction to form the Tamiflu skeleton. Throughout the synthesis, well-established, highly efficient reactions were employed, and no protection/deprotection sequence was needed.}, issn = { 2046-2069}, doi = {http://dx.doi.org/10.1039/C3RA47210H}, author = {Chavan, S. P. and Chavan, P. N. and Khairnar, L. B.} } @article { ISI:000332804700003, title = {Contemporary avenues in catalytic P-H bond addition reaction: a case study of hydrophosphination}, journal = {Coordination Chemistry Reviews}, volume = {265}, year = {2014}, month = {APR}, pages = {52-73}, publisher = {ELSEVIER SCIENCE SA}, type = {Review}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Remarkable advances and current state-of-the-art developments in catalytic hydrophosphination of alkenes and alkynes are reviewed. The challenges in constructing a C P bond with a special emphasis on metal catalysed (asymmetric) hydrophosphination are highlighted. Only those systems that unambiguously proceed via P H bond addition across a C-C/X (X = O, N, S) multiple bond have been covered in this overview. Reviewed examples support the assumption that either strongly chelating ligands or reaction products that act as ligands, enhance the rate of hydrophosphination. The asymmetric variant of this transformation allows installation of p-chiral [enantiomeric excess (ee) up to 82\%] as well as C-chiral (ee up to 99\%) centres. The limited spectroscopic, mechanistic data and OFT calculations point at two distinctly different mechanisms. In case of hydrophosphination, the metal undergoes oxidative addition and reductive elimination steps (in general), thus changing the oxidation state from M(0) to M(II) and back to M(0). Whereas in asymmetric hydrophosphination it is proposed that the oxidation state of the metal remains unaltered throughout the catalytic cycle. The examples described in this overview showcase the real power of catalytic hydrophosphination in constructing various phosphorus compounds, which may initiate a new era in organo-phosphorus chemistry. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Alkynes, Asymmetric hydrophosphination, Hydrophosphination, Metal catalyzed hydrophosphination, Olefins, P-H bond addition}, issn = {0010-8545}, doi = {10.1016/j.ccr.2014.01.006}, author = {Koshti, Vijay and Gaikwad, Shahaji R. and Chikkali, Samir H.} } @article { ISI:000341855900027, title = {Cross dimerization of amyloid-beta and alpha synuclein proteins in aqueous environment: a molecular dynamics simulations study}, journal = {Plos One}, volume = {9}, number = {9}, year = {2014}, month = {SEP}, pages = {Article No. : e106883}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Self-assembly of the intrinsically unstructured proteins, amyloid beta (A beta) and alpha synclein (alpha Syn), are associated with Alzheimer{\textquoteright}s Disease, and Parkinson{\textquoteright}s and Lewy Body Diseases, respectively. Importantly, pathological overlaps between these neurodegenerative diseases, and the possibilities of interactions between A beta and alpha Syn in biological milieu emerge from several recent clinical reports and in vitro studies. Nevertheless, there are very few molecular level studies that have probed the nature of spontaneous interactions between these two sequentially dissimilar proteins and key characteristics of the resulting cross complexes. In this study, we have used atomistic molecular dynamics simulations to probe the possibility of cross dimerization between alpha Syn(1-95) and A beta(1-42), and thereby gain insights into their plausible early assembly pathways in aqueous environment. Our analyses indicate a strong probability of association between the two sequences, with inter-protein attractive electrostatic interactions playing dominant roles. Principal component analysis revealed significant heterogeneity in the strength and nature of the associations in the key interaction modes. In most, the interactions of repeating Lys residues, mainly in the imperfect repeats {\textquoteleft}KTKEGV{\textquoteright} present in alpha Syn(1-95) were found to be essential for cross interactions and formation of inter-protein salt bridges. Additionally, a hydrophobicity driven interaction mode devoid of salt bridges, where the non-amyloid component (NAC) region of alpha Syn(1-95) came in contact with the hydrophobic core of A beta(1-42) was observed. The existence of such hetero complexes, and therefore hetero assembly pathways may lead to polymorphic aggregates with variations in pathological attributes. Our results provide a perspective on development of therapeutic strategies for preventing pathogenic interactions between these proteins.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0106883}, author = {Jose, Jaya C. and Chatterjee, Prathit and Sengupta, Neelanjana} } @article { ISI:000331347300019, title = {Culturable bacterial phylogeny from a shallow water hydrothermal vent of espalamaca (Faial, Azores) reveals a variety of novel taxa}, journal = {Current Science}, volume = {106}, number = {1}, year = {2014}, month = {JAN}, pages = {58-69}, publisher = {INDIAN ACAD SCIENCES}, type = {Article}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Phylogenetic diversity of the 16S rRNA gene associated with the domain bacteria was examined at the level of operational taxonomic units (OTUs) using the rarefaction analysis from a newly identified shallow water hydrothermal vent, Espalamaca in the Azorean Island Faial (Horta), North Atlantic Ocean. Diluted sea water nutrient agar amended with metals manganese, lead, iron and element sulphur, could help in retrieving highest OTUs (95) from the vent and 39 OTUs from nonvent. Molecular tools implemented on bacterial census indicated the occupancy of gamma-Proteobacteria by 55.78\%, alpha-Proteobacteria by 21.05\% and 12.63\% of Bacteroidetes in the total population. Occurrence of novel species maximized with alpha-Proteobacteria (11/20) followed by Bacteroidetes (5/12) signified the necessity of studying these groups to strengthen the biodiversity database. Shannon index (H{\textquoteright}) and the Chao I richness estimator illustrated a strong bacterial community in the venting area. The current study confers many bacterial genera which were not reported earlier in any of the shallow water vents and adds 33 new taxa to the database.

}, keywords = {Bacterial phylogeny, metals, novel taxa, rarefaction analysis, shallow vent}, issn = {0011-3891}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Colaco, Ana and Dastager, Syed Gulam and Santos, Ricardo Serrao and Meena, Ram Murti} } @article {46400, title = {Design and synthesis of 3D porous diamondoid frameworks by cocrystallization}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C470}, type = {Meeting Abstract}, keywords = {cocrystals, crystal engineering, Porous Organic Cages}, issn = {2053-2733}, author = {Tothadi, Srinu and Little, Marc A. and Hasell, Tom and Briggs, Michel E. and Chong, Samantha Y. and Cooper, Andrew I.} } @article {43307, title = {Determination of optimum values of descriptors to set filters for synthetic tri-pyrrole derivatives (prodiginines) against multi drug resistant strain of plasmodium falciparum}, journal = {Current Research in Drug Discovery}, volume = {1}, year = {2014}, month = {JAN}, pages = {51-59}, abstract = {

Abstract: In the present study, we have carried out extensive non-linear Quantitative-Structure Activity Relationship (QSAR) analysis to correlate in vitro anti-malarial activity against multi drug resistant strain of Plasmodium falciparum. Forty-three synthetic prodiginines with different structural features were used for their potential antimalarial activity. Linear, bilinear, biexponential and parabolic equations were developed. These equations were compared to determine the optimum values of descriptors for very useful and easily interpretable descriptors. The optimum values of these descriptors could be helpful in finding and optimizing a good lead compound. Obtained correlations reveal that various factors like lipophilicity, molecular weight and number of bonds have non-linear relation with the anti-malarial activity. Keywords: Prodiginines, Anti-Malarial Activity, Optimum/Desirability Values, Hybrid Inverse-QSAR

}, doi = {10.3844/crddsp.2014.51.59}, author = {Masand, Vijay H. and Mahajan, Devidas T. and Pourbasheer, Eslam and Hadda, Taibi Ben and Chauhan, Harsh and Gajbhiye, Jayant M. and Alafeefy, A. M.} } @article { ISI:000339727800002, title = {Dimorphism and hydrocarbon metabolism in Yarrowia lipolytica var. indica}, journal = {Archives of Microbiology}, volume = {196}, number = {8}, year = {2014}, month = {AUG}, pages = {545-556}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Yarrowia lipolytica is able to metabolize high Mr hydrophobic natural compounds such as fatty acids and hydrocarbons. Characteristically, strains of Y. lipolytica can grow as populations with variable proportions of yeast and filamentous forms. In the present study, we describe the dimorphic characteristics of a variant designated as Y. lipolytica var. indica isolated from petroleum contaminated sea water and the effect of cell morphology on hydrocarbon metabolism. The variant behaved as a yeast monomorphic strain, under conditions at which terrestrial Y. lipolytica strain W29 and its derived strains, grow as almost uniform populations of mycelial cells. Using organic nitrogen sources and N-acetylglucosamine as carbon source, var. indica was able to form mycelial cells, the proportion of which increased when incubated under semi-anaerobic conditions. The cell surface characteristics of var. indica and W29 were found to be different with respect to contact angle and percent hydrophobicity. For instance, percent hydrophobicity of var. indica was 89.93 +/- A 1.95 while that of W29 was 70.78 +/- A 1.1. Furthermore, while all tested strains metabolize hydrocarbons, only var. indica was able to use it as a carbon source. Yeast cells of var. indica metabolized hexadecane with higher efficiency than the mycelial form, whereas the mycelial form of the terrestrial strain metabolized the hydrocarbon more efficiently, as occurred with the mycelial monomorphic mutant AC11, compared to the yeast monomorphic mutant AC1.

}, keywords = {Hexadecane metabolism, Yarrowia lipolytica, Yeast-mycelium transition}, issn = {0302-8933}, doi = {10.1007/s00203-014-0990-2}, author = {Palande, A. S. and Kulkarni, S. V. and Leon-Ramirez, C. and Campos-Gongora, E. and Ruiz-Herrera, J. and Deshpande, Mukund V.} } @article { ISI:000341023400022, title = {Easy access to alpha-aryl substituted gamma-ketophosphonates: lewis acid mediated reactions of 1,3-diketones with alpha-hydroxyphosphonates and tandem regioselective C-C bond cleavage}, journal = {Organic \& Biomolecular Chemistry}, volume = {12}, number = {36}, year = {2014}, month = {JUL}, pages = {7140-7149}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A range of alpha-aryl substituted gamma-ketophosphonates is synthesised by Lewis acid mediated reactions of 1,3-diketones and easily accessible, inexpensive benzylic alpha-hydroxyphosphonates in an operationally simple method under solvent-free conditions without exclusion of air/moisture. A regioselective C-C bond cleavage for 1,3-diketones in a tandem fashion has also been demonstrated. Synthesis of a gamma-ketophosphonate with phenol functionality at the a-position (structural analogue of raspberry ketone, a natural product) has also been presented.

}, issn = {1477-0520}, doi = {10.1039/c4ob01091d}, author = {Pallikonda, Gangaram and Chakravarty, Manab and Sahoo, Manoj Kumar} } @article { ISI:000343624300007, title = {Efficient and mild method for preparation of allylic amines from aziridine-2-alcohols using PPh3/I-2/imidazole}, journal = {Tetrahedron Letters}, volume = {55}, number = {43}, year = {2014}, month = {OCT}, pages = {5905-5907}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Allylic amines are synthesized in good to excellent yields by treatment of aziridine-2-alcohols with PPh3/I-2/imidazole in THF as solvent under mild conditions. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Chiral allylic amine, Chiral aziridine-2-alcohols, PPh3/iodine/imidazole, Reductive elimination}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.08.078}, author = {Chavan, Subhash P. and Khairnar, Lalit B. and Chavan, Prakash N.} } @article { ISI:000346624500002, title = {Efficient synthesis of 1,5-benzodiazepines catalyzed by bismuth nitrate}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry including Medicinal Chemistry}, volume = {53}, number = {12}, year = {2014}, month = {DEC}, pages = {1561-1567}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

An efficient method has been developed for the synthesis of biologically active 1,5-benzodiazepines in one-pot by reacting o-phenylenediamine and ketones catalyzed by bismuth nitrate pentahydrate at room temperature or under microwave irradiation.

}, keywords = {1, 5-benzodiazepines, bismuth nitrate pentahydrate, o-Phenylenediamine, synthetic methods}, issn = {0376-4699}, author = {Bhattacharya, Asish K. and Dange, Santoshkumar S. and Polanki, Innaiah K. and Chand, Hemender R.} } @article { ISI:000341552000026, title = {Efficient synthesis of O-aryloxime ethers by copper fiuorapatite catalyzed cross-coupling of aryloximes with arylboronic acids}, journal = {Tetrahedron Letters}, volume = {55}, number = {38}, year = {2014}, month = {SEP}, pages = {5327-5332}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A novel, highly efficient, and mild protocol has been developed for the synthesis of O-aryloxime ethers in good to excellent yields at ambient reaction conditions. This is the first report in which =N-O-Ar linkage was achieved with ecofriendly, recyclable, heterogeneous copper fluorapatite (CuFAP) catalyst via C-O cross coupling of aryloxime with arylboronic acid in the presence of Cs2CO3 as base and methanol as solvent. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Arylboronic acid, Aryloxime, Copper fluorapatite, O-Aryloxime ethers}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.07.056}, author = {Mulla, Shafeek Abdul Rashid and Chavan, Santosh S. and Inamdar, Suleman M. and Pathari, Mohsinkhan Y. and Shaikh, Taufeekaslam M. Y.} } @conference { ISI:000352795700066, title = {Enhancement in the field emission behavior of graphene in N-2/O-2 high vacuum ambience}, booktitle = {2014 27th International Vacuum Nanoelectronics Conference (IVNC) }, series = {International Vacuum Nanoelectronics Conference}, year = {2014}, note = {27th International Vacuum Nanoelectronics Conference (IVNC), Engelberg, SWITZERLAND, JUL 06-10, 2014}, month = {JUL}, publisher = {IEEE, 345 E 47th ST, New York, NY 10017 USA}, organization = {IEEE, 345 E 47th ST, New York, NY 10017 USA}, address = {Engelberg, Switzerland}, abstract = {

Herein we report, pressure dependent field emission (FE) behaviour of a few-layer graphene emitter. Gas dependent FE properties have been investigated in ultra high vacuum (UHV), as well as in N-2 and O-2 ambience at base pressure similar to 1x10(-6) torr. Interestingly, the graphene emitter when operated in N-2/O-2 ambience exhibits lower turn-on field and higher emission current density, as compared to the UHV conditions. The emission current stability investigated at preset value of similar to 1 mu A over the period of more than 2 hrs is found better in the N2 ambience and is characterized by fewer fluctuations, in contrast to the behaviour in the O-2 ambience. The observed enhanced electron emission behavior in N-2/O-2 ambience is attributed to modulation of the work function of graphene emitter.

}, keywords = {graphene, Pressure Dependent Field Emission}, isbn = {978-1-4799-5306-6}, issn = {2164-2370}, doi = {10.1109/IVNC.2014.6894791}, author = {Suryawanshi, S. R. and Kolhe, Pankaj S. and Gavhane, D. S. and Patil, S. S. and Chavan, P. G. and More, Mahendra A. and Late, Dattatray J.}, editor = {Tsujino, S. and Gobrecht, J. and Paraliev, M. and Braun, H. H. and Groening, O. and Feurer, T.} } @article { ISI:000345902500007, title = {Facile and convenient synthesis of (+/-)-Biotin via MgCl2/Et3N-mediated C-C coupling and mitsunobu reaction}, journal = {Synlett}, volume = {25}, number = {20}, year = {2014}, month = {DEC}, pages = {2879-2882}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

A synthesis of (+/-)-biotin is described starting from simple starting materials viz. cyclohexanone and amino malonic acid ester. The key steps involved are MgCl2/Et3N coupling of amino malonic acid ester derivative and acid chloride, Mitsunobu reaction, ozonolysis, Staudinger reduction, novel urea formation, and subsequent dibenzylation. This approach is economical and involves high-yielding steps and simple reaction conditions.

}, keywords = {Appel reaction, biotin, Mitsunobu reaction, Ozonolysis, Staudinger reduction}, issn = {0936-5214}, doi = {10.1055/s-0034-1379365}, author = {Chavan, Subhash P. and Chavan, Prakash N. and Lasonkar, Pradeep B. and Khairnar, Lalit B. and Kadam, Appasaheb L.} } @article {46390, title = {Ferromagnetic tetranuclear Cu(II) complex: catecholase and phenoxazinone synthase activities}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAY}, pages = {C926}, type = {Meeting Abstract}, keywords = {catalysis, Ferromagnetic, Tetranuclear copper}, issn = {2053-2733}, author = {Mitra, Merry and Kundu, Tanay and Kaur, Gurpreet and Sharma, Gyaneswar and Choudhury, Angshuman Roy and Singh, Yogesh and Ghosh, Rajarshi} } @article { ISI:000346266000074, title = {Field emission properties of ZnO nanosheet arrays}, journal = {Applied Physics Letters}, volume = {105}, number = {23}, year = {2014}, month = {DEC}, pages = {233101}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

{Electron emission properties of electrodeposited ZnO nanosheet arrays grown on Indium tin oxide coated glass substrates have been studied. Influence of oxygen vacancies on electronic structures and field emission properties of ZnO nanosheets are investigated using density functional theory. The oxygen vacancies produce unshared d electrons which form an impurity energy state; this causes shifting of Fermi level towards the vacuum, and so the barrier energy for electron extraction reduces. The ZnO nanosheet arrays exhibit a low turn-on field of 2.4 V/mu m at 0.1 mu A/cm(2) and current density of 50.1 mu A/cm(2) at an applied field of 6.4 V/mu m with field enhancement factor

}, issn = {0003-6951}, doi = {10.1063/1.4903271}, author = {Naik, Kusha Kumar and Khare, Ruchita T. and Chakravarty, Disha and More, Mahendra A. and Thapa, Ranjit and Late, Dattatray J. and Rout, Chandra Sekhar} } @article { ISI:000338980500002, title = {Formation of a room temperature stable Fe-V(O) complex: reactivity toward unactivated C-H bonds}, journal = {Journal of American Chemical Society}, volume = {136}, number = {27}, year = {2014}, month = {JUL}, pages = {9524-9527}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An Fe-V(O) complex has been synthesized from equimolar solutions of (Et4N)(2)[Fe-III(Cl)(biuretamide)] and mCPBA in CH3CN at room temperature. The Fe-V(O) complex has been characterized by UV-vis, EPR, Mossbauer, and HRMS and shown to be capable of oxidizing a series of alkanes having C-H bond dissociation energies ranging from 99.3 kcal mol(-1) (cyclohexane) to 84.5 kcal mori (cumene). Linearity in the Bell-Evans-Polayni graph and the finding of a large kinetic isotope effect suggest that hydrogen abstraction is engaged the rate-determining step.

}, issn = {0002-7863}, doi = {10.1021/ja412537m}, author = {Ghosh, Munmun and Singh, Kundan K. and Panda, Chakadola and Weitz, Andrew and Hendrich, Michael P. and Collins, Terrence J. and Dhar, Basab B. and Sen Gupta, Sayam} } @article { ISI:000333581400004, title = {Functionalization of cardanol: towards biobased polymers and additives}, journal = {Polymer Chemistry}, volume = {5}, number = {9}, year = {2014}, month = {OCT}, pages = {3142-3162}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Among the renewable resource materials, cashew nut shell liquid (CNSL) is considered as an important starting material due to its unique structural features, abundant availability and low cost. A large number of chemicals and products have been developed starting from CNSL by taking advantage of the three reactive sites, namely, phenolic hydroxyl, aromatic ring and unsaturation(s) in the alkenyl side chain. This comprehensive review deals with general information on CNSL, its purification and separation methods, reactivity and applications in polymer chemistry.

}, issn = {1759-9954}, doi = {10.1039/c3py01194a}, author = {Voirin, Coline and Caillol, Sylvain and Sadavarte, Nilakshi V. and Tawade, Bhausaheb V. and Boutevin, Bernard and Wadgaonkar, Prakash P.} } @article { ISI:000336072400003, title = {Graphene quantum dots conjugated albumin nanoparticles for targeted drug delivery and imaging of pancreatic cancer}, journal = {Journal of Materials Chemistry B}, volume = {2}, number = {21}, year = {2014}, month = {JUN}, pages = {3190-3195}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Pancreatic cancer is considered to be the deadliest of all cancers due to its poor prognosis and resistance to conventional therapies. In this study, the potential of hyaluronic acid functionalized and green fluorescent graphene quantum dot (GQD)-labeled human serum albumin nanoparticles for pancreatic cancer specific drug delivery and bioimaging was explored. GQDs with tunable fluorescence properties and biocompatibility have attracted much more interest in recent years as compared to their metal semiconductor counterparts. We adopted lawsone (2-hydroxy-1,4-naphthoquinone) as a novel reducing agent for the synthesis of quantum dots and, in addition to excellent fluorescence of the synthesized GQDs, a good quantum yield of similar to 14\% was also obtained. Gemcitabine, the most preferred drug for pancreatic cancer treatment, was encapsulated in albumin nanoparticles, and it was observed that our nanoformulation significantly enhanced the bioavailability and sustained release property of the drug to pancreatic cancer cells in vitro. Moreover, the GQD-mediated bioimaging was excellent and enhanced the efficacy of our system as a drug delivery vehicle.

}, issn = {2050-750X}, doi = {10.1039/c4tb00015c}, author = {Nigam, Preeti and Waghmode, Shobha and Louis, Michelle and Wangnoo, Shishanka and Chavan, Pooja and Sarkar, Dhiman} } @article { ISI:000342766500050, title = {High performance all-organic flexural piezo-FET and nanogenerator via nanoscale soft-interface strain modulation}, journal = {Physical Chemistry Chemical Physics}, volume = {16}, number = {41}, year = {2014}, month = {SEP}, pages = {22874-22881}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Flexural strain fields are encountered in a wide variety of situations and invite novel device designs for their effective use in sensing, actuating, as well as energy harvesting (nanogenerator) applications. In this work we demonstrate an interesting all-organic device design comprising an electrospun P(VDF-TrFE) fiber-mat built directly on a conducting PANI film, which is also grown on a flexible PET substrate, for flexural piezo-FET and nanogenerator applications. Orders of magnitude stronger modulation of electrical transport in PANI film is realized in this device as compared to the case of a similar device but with a uniform spin-coated P(VDF-TrFE) film. We find that in the flexural mode of operation, the interaction between the laterally modulated nanoscale strain field distributions created by the fibers and the applied coherent strain field strongly influences the carrier transport in PANI. The transport modulation is suggested to occur due to strain-induced conformational changes in P(VDF-TrFE) leading to changes in carrier localization-delocalization. We further show that the fiber-mat based device system also works as an efficient nanogenerator capable of delivering power for low power applications.

}, issn = {1463-9076}, doi = {10.1039/c4cp02155j}, author = {Dhakras, Dipti and Gawli, Yogesh and Chhatre, Shraddha and Wadgaonkar, Prakash and Ogale, Satishchandra} } @article { ISI:000330241000045, title = {Highly efficient one-pot multi-component synthesis of alpha-aminophosphonates and bis-alpha-aminophosphonates catalyzed by heterogeneous reusable silica supported dodecatungstophosphoric acid (DTP/SiO2) at ambient temperature and their antitubercular eval}, journal = {RSC Advances}, volume = {4}, number = {15}, year = {2014}, month = {JAN}, pages = {7666-7672}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A highly efficient one-pot multi-component reaction (MCR) protocol over DTP/SiO2 has been developed for the synthesis of alpha-aminophosphonate derivatives (4a-x) in excellent yields. The alpha-aminophosphonate derivatives were for the first time evaluated for their antitubercular activity against the M. tuberculosis H37Ra (MTB) strain. An evaluation of the data on the cytotoxicity and antimicrobial activity shows that 4n and 4v are promising antitubercular agents.

}, issn = {2046-2069}, doi = {10.1039/c3ra45853a}, author = {Mulla, Shafeek Abdul Rashid and Pathan, Mohsinkhan Y. and Chavan, Santosh S. and Gample, Suvarna P. and Sarkar, Dhiman} } @article { ISI:000331675300001, title = {Hybrid diphosphorus ligands in rhodium catalysed asymmetric hydroformylation}, journal = {Coordination Chemistry Reviews}, volume = {262}, year = {2014}, month = {MAR}, pages = {1-15}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

This review aims to illustrate recent advances in the application of hybrid diphosphorus ligands for the Rh catalysed hydroformylation of alkenes, discussing the most prevalent classes of hybrid systems, i.e. phosphine-phosphinite, phosphine-phosphonite, phosphine-phosphite, phosphite-phosphoramidite and phosphite-phosphoramidite and comparing their performance with relevant C-2 symmetric counterparts. In order to introduce the field and put the results in context, a short overview on Rh hydroformylation is provided. Available spectroscopic (in situ) data on the coordination modes of hybrid phosphorus ligands and the catalytic performance of these systems in asymmetric hydroformylation of vinyl arenes are reported. Potential avenues for future research are shortly discussed. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Asymmetric hydroformylation, Catalyst resting state, Hybrid ligand design, In situ spectroscopy, Rhodium}, issn = {0010-8545}, doi = {10.1016/j.ccr.2013.10.024}, author = {Chikkali, Samir H. and van der Vlugt, Jarl Ivar and Reek, Joost N. H.} } @conference { ISI:000375936100396, title = {Impact of pressure and temperature on tetra-n-butyl ammonium bromide semi-clathrate process for carbon dioxide capture}, booktitle = {International Conference on Applied Energy, ICAE2014}, series = {Energy Procedia}, volume = {61}, year = {2014}, note = {6th International Conference on Applied Energy (ICAE), Taipei, TAIWAN, MAY 30-JUN 02, 2014}, month = {MAY}, pages = {1780-1783}, publisher = {Elsevier Science BV}, organization = {Elsevier Science BV}, address = {Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands}, abstract = {

The pre-combustion capture of CO2 in an IGCC power plant employing the hydrate based gas separation (HBGS) process is a novel method currently receiving attention around the world. Tetra-n-butyl ammonium bromide (TBAB) is a promoter that has been shown to improve the efficiency of hydrate formation. In this study, the effect of temperature and pressure on 0.3 mol\% TBAB solution is investigated. The induction time for the experiments conducted at 6.0 MPa and 274.8 K was found to be lower, while nucleation became increasingly random as temperature is increased and pressure is reduced. Total gas uptake and normalized rate of hydrate formation (NR5) is also the highest for the experiments conducted at 6.0 MPa and 274.8 K. However, it was found that the hydrate phase CO2 composition remains relatively constant at both reduced temperatures and pressures. (C) 2014 The Authors. Published by Elsevier Ltd.

}, keywords = {Carbon dioxide capture, Clathrate process, Gas hydrates, Gas separation, Promoters, tetra-n-butyl ammonium bromide}, issn = {1876-6102}, doi = {10.1016/j.egypro.2014.12.211}, author = {Babu, Ponnivalavan and Chin, Weng Inn and Kumar, Rajnish and Linga, Praveen}, editor = {Yan, J. and Lee, D. J. and Chou, S. K. and Desideri, U. and Li, H.} } @article { ISI:000337645600001, title = {In the sense of transcription regulation by G-quadruplexes: asymmetric effects in sense and antisense strands}, journal = {Biochemistry}, volume = {53}, number = {23}, year = {2014}, month = {JUN}, pages = {3711-3718}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

G-Quadruplexes occupy important regulatory regions in the genome. DNA G-quadruplexes in the promoter regions and RNA quadruplexes in the UTRs (untranslated regions) have been individually studied and variously implicated at different regulatory levels of gene expression. However, the formation of G-quadruplexes in the sense and antisense strands and their corresponding roles in gene regulation have not been studied in much detail. In the present study, we have elucidated the effect of strand asymmetry in this context. Using biophysical methods, we have demonstrated the formation of stable G-quadruplex structure in vitro using CD and UV melting. Additionally, ITC was employed to demonstrate that a previously reported selective G-quadruplex ligand was able to bind and stabilize the G-quadruplex in the present sequence. Further, we have shown using reporter constructs that although the DNA G-quadruplex in either strand can reduce translation efficiency, transcriptional regulation differs when G-quadruplex is present in the sense or antisense strand. We demonstrate that the G-quadruplex motif in the antisense strand substantially inhibits transcription, while when in the sense strand, it does not affect transcription, although it does ultimately reduce translation. Further, it is also shown that the G-quadruplex stabilizing ligand can enhance this asymmetric transcription regulation as a result of the increased stabilization of the G-quadruplex.

}, issn = {0006-2960}, doi = {10.1021/bi401451q}, author = {Agarwal, Tani and Roy, Saumya and Kumar, Santosh and Chakraborty, Tushar Kanti and Maiti, Souvik} } @article {43391, title = {Isohexide-diacetal based polymers and a process thereof}, number = {PCT/IN2014/000318}, year = {2014}, month = {NOV}, abstract = {

The present invention discloses isohexide based compounds and their polymers which are derived from renewable resources and are potentially degradable. Also disclosed herein is the synthesis of isohexide based monomers and their polymers from renewable resources which are potentially degradable. Further, the present invention disclose a process for the synthesis of isohexide based copolymers via copolymerization of isohexide based monomers and long chain diols, which are degradable. (FR)Cette invention concerne des compos{\'e}s {\`a} base d{\textquoteright}isohexide et leurs polym{\`e}res qui sont d{\'e}riv{\'e}s de ressources renouvelables et sont potentiellement d{\'e}gradables. Cette invention concerne {\'e}galement la synth{\`e}se de monom{\`e}res {\`a} base d{\textquoteright}isohexide et leurs polym{\`e}res {\`a} partir de ressources renouvelables qui sont potentiellement d{\'e}gradables. Un proc{\'e}d{\'e} de synth{\`e}se de copolym{\`e}res {\`a} base d{\textquoteright}isohexide par copolym{\'e}risation desdits monom{\`e}res {\`a} base d{\textquoteright}isohexide et de diols {\`a} cha{\^\i}ne longue, qui sont d{\'e}gradables, est en outre d{\'e}crit.

}, author = {Chikkali, Samir H. and Rajput, Bhausaheb S.} } @article { ISI:000330799900051, title = {Lignocellulose processing: a current challenge}, journal = {RSC Advances}, volume = {4}, number = {16}, year = {2014}, month = {JAN}, pages = {8271-8277}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Lignocellulosic biomass, of which inedible crops are a renewable source, is expected to become one of the key renewable energy resources in the near future, to deal with global warming and the depletion of conventional fossil fuel resources. It also holds the key to supplying society{\textquoteright}s basic needs for the sustainable production of chemicals and fuels without impacting the human food supply. Despite this, the production of 2nd generation biofuels and chemicals has not yet been commercialized. Therefore, the challenges involved in the production of lignocellulosic biomass derived fuels and chemicals must be addressed. The search for economic pretreatment methods has been recognized as one of the main hurdles for the processing of biomass to biofuels and chemicals. The conversion of all biomass components, lignin in particular, would greatly contribute to the economic viability of biomass based processes for 2nd generation biofuels and chemicals. The highly organized crystalline structure of cellulose presents an obstacle to its hydrolysis. Hydrolysis of lignocellulose carbohydrates into fermentable sugars requires a number of different biomass degrading enzymes such as cellulases and hemicellulases. Still, a number of technical and scientific issues within pretreatment and hydrolysis remain to be solved. Depending on the raw material and pretreatment technology, the enzyme mixtures must be designed to degrade biomass carbohydrates. Rapid advances in enzyme, microbial and plant engineering would provide the necessary breakthroughs for the successful commercialization of biomass derived fuels and chemicals.

}, issn = {2046-2069}, doi = {10.1039/c3ra46112b}, author = {Singhvi, Mamata S. and Chaudhari, Shivani and Gokhale, Digambar V.} } @article { ISI:000340809600002, title = {Magnetic alignment of gamma (core)-alpha (shell) Fe2O3 nanorods in a solid polymer electrolyte for Li-Ion batteries}, journal = {Journal of Physical Chemistry C}, volume = {118}, number = {33}, year = {2014}, month = {AUG}, pages = {18836-18845}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The temperature-dependent ionic conductivity and thermal properties are characterized for a solid polymer electrolyte of poly(ethylene oxide) (PEO) and LiClO4 filled with 1 wt \% gamma-phase core (maghemite) and alpha-phase shell (hematite) Fe2O3 nanorods. Samples are solvent-cast in the absence and presence of a 0.5 T magnetic field, dried at room temperature under vacuum for 72 h, and measured under nitrogen. Vibrating sample magnetometry indicates that the magnetic treatment aligns the nanorods to some extent in the desired orientation normal to the electrode surface. For samples with an ether oxygen to lithium ratio (EO/Li) of 10:1, the nanorods induce sample-to-sample variability in the ionic conductivity. The magnetic treatment eliminates this variability, and differential scanning calorimetry data support the observation that the magnetic treatment increases the structural homogeneity of the electrolyte. For samples with an EO/Li of 3:1, the ionic conductivity is 3 orders of magnitude larger for samples containing 5 times more of the crystal structure, (PEO)(6)/LiClO4. This result is surprising because an inverse relationship between crystallinity and conductivity is normally observed for semicrystalline, solid polymer electrolytes. When the crystal fraction is increased by a factor of 8 via the combination of nanorods and magnetic treatment, the conductivity does not continue to increase, showing that the effect does not persist beyond a critical fraction of (PEO)(6)/LiClO4. The results demonstrate that field-effect alignment of magnetic nanorods increases the crystal fraction and homogeneity of PEO/LiClO4, but does not affect the ionic conductivity in the range of salt and nanorod concentrations investigated.

}, issn = {1932-7447}, doi = {10.1021/jp501786r}, author = {Schaetzl, Dean M. and Li, Peng and Chaudhari, Nilima and Bernstein, Gary H. and Fullerton-Shirey, Susan K.} } @article { ISI:000336005600009, title = {Mesoporous, ligand free Cu-Fe solid catalyst mediated CS cross coupling of thiols with aryl halides}, journal = {Applied Catalysis A-General}, volume = {476}, year = {2014}, month = {APR}, pages = {54-60}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Solid catalyst derived from Cu-Fe hydrotalcite was demonstrated to be a novel, ligandless, efficient and environmentally greener catalyst for the synthesis of diaryl sulfurs from the C-S cross coupling reaction of substituted thiols with different aryl halides. This catalyst has shown higher product yield in the presence of dimethylformamide (as a solvent) and K2CO3 (as a base) at 120 C. Influence of different solvents and bases on the product yield has also been investigated. The catalyst can be easily separated from the reaction mixture, simply by filtration and reused several times without a significant loss of its activity. The catalyst has been fully characterized for its surface and bulk properties and the mesoporous CuO:Fe2O3 phase was attributed for its catalytic activity towards S-arylation reactions. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {C-S cross coupling, Cu-Fe-hydrotalcite, S-arylation}, issn = {0926-860X}, doi = {10.1016/j.apcata.2014.02.015}, author = {Dumbre, Deepa K. and Selvakannan, P. R. and Patil, S. K. and Choudhary, Vasant R. and Bhargava, Suresh Kumar} } @article { ISI:000343673200022, title = {Mitigating the cytotoxicity of graphene quantum dots and enhancing their applications in bioimaging and drug delivery}, journal = {ACS Macro Letters}, volume = {3}, number = {10}, year = {2014}, month = {OCT}, pages = {1064-1068}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Despite the promising photophysical properties of fluorescent graphene quantum dots (GQDs), their cellular toxicity needs to be addressed before their full potential could be completely realized in biomedicine. A simple method for mitigating the toxicity of GQDs by embedding them in PEG matrix is reported here. The enhanced biocompatibility of polymer modified, P-GQDs, is attributed to reduced reactive oxygen species generation, as measured by an intracellular ROS assay. We also demonstrate the enhanced loading and efficient intracellular delivery of therapeutics by P-GQDs.

}, issn = {2161-1653}, doi = {10.1021/mz500479k}, author = {Chandra, Anil and Deshpande, Sonal and Shinde, Dhanraj B. and Pillai, Vijayamohanan K. and Singh, Neetu} } @article { ISI:000339807200033, title = {Modeling gating charge and voltage changes in response to charge separation in membrane proteins}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {111}, number = {31}, year = {2014}, month = {AUG}, pages = {11353-11358}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Measurements of voltage changes in response to charge separation within membrane proteins can offer fundamental information on mechanisms of charge transport and displacement processes. A recent example is provided by studies of cytochrome c oxidase. However, the interpretation of the observed voltage changes in terms of the number of charge equivalents and transfer distances is far from being trivial or unique. Using continuum approaches to describe the voltage generation may involve significant uncertainties and reliable microscopic simulations are not yet available. Here, we attempt to solve this problem by using a coarse-grained model of membrane proteins, which includes an explicit description of the membrane, the electrolytes, and the electrodes. The model evaluates the gating charges and the electrode potentials (c.f. measured voltage) upon charge transfer within the protein. The accuracy of the model is evaluated by a comparison of measured voltage changes associated with electron and proton transfer in bacterial photosynthetic reaction centers to those calculated using our coarse-grained model. The calculations reproduce the experimental observations and thus indicate that the method is of general use. Interestingly, it is found that charge-separation processes with different spatial directions (but the same distance perpendicular to the membrane) can give similar observed voltage changes, which indicates that caution should be exercised when using simplified interpretation of the relationship between charge displacement and voltage changes.

}, keywords = {bacterial reaction center, electrogenicity, membrane potential, proton/electron transfer}, issn = {0027-8424}, doi = {10.1073/pnas.1411573111}, author = {Kim, Ilsoo and Chakrabarty, Suman and Brzezinski, Peter and Warshel, Arieh} } @article { ISI:000344470100036, title = {Molybdenum(VI) dioxo complexes for the epoxidation of allylic alcohols and olefins}, journal = {Journal of Organometallic Chemistry}, volume = {772}, year = {2014}, month = {DEC}, pages = {271-279}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Several molybdenum(VI) dioxo complexes have been investigated as catalyst precursors for allylic alcohol epoxidation using mainly hydrogen peroxide as oxidant. All catalysts proved to be efficient and selective for the epoxidation of allylic alcohols provided the olefins were rather electron rich. Indeed, electron poor substrates could be converted selectively into the corresponding unsaturated aldehydes. A chiral dioxomolybdenum complex based on an optically pure tridentate Schiff base ligand was synthesized and characterized. Though that complex provided an efficient epoxidation catalyst for allylic alcohols and olefins, no chiral induction was observed. During the X-ray diffraction analysis, the cooling at 100 K led to the appearance of super-lattice reflections on diffraction patterns reflecting an ordering of the structure. Instead of one organometallic species observed at 298 K, three similar complexes of the same molecular structure could be observed in the asymmetric unit at 100 K. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Allylic alcohol, epoxidation, Molybdenum, Oxidation, Peroxide}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2014.09.029}, author = {Pandhare, Swati L. and Jadhao, Rajesh R. and Puranik, Vedavati G. and Joshi, Pranaya V. and Capet, Frederic and Dongare, Mohan K. and Shubhangi B. Umbarkar and Michon, Christophe and Agbossou-Niedercorn, Francine} } @article { ISI:000332059600003, title = {Morphological effects of G-quadruplex stabilization using a small molecule in zebrafish}, journal = {Biochemistry}, volume = {53}, number = {7}, year = {2014}, month = {FEB}, pages = {1117-1124}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Zebrafish (Danio rerio) embryos are transparent and advantageous for studying early developmental changes due to ex utero development, making them an appropriate model for studying gene expression changes as a result of molecular targeting. Zebrafish embryos were injected with a previously reported G-quadruplex selective ligand, and the phenotypic changes were recorded. We report marked discrepancies in the development of intersegmental vessels. In silico analysis determined that the putative G-quadruplex motif occur in the upstream promoter region of the Cdh5 (N-cadherin) gene. A real-time polymerase chain reaction-based investigation indicated that in zebrafish, CDH-2 (ZN-cad) was significantly downregulated in the ligand-treated embryos. Biophysical characterization of the interaction of the ligand with the G-quadruplex motif found in this promoter yielded strong binding and stabilization of the G-quadruplex with this ligand. Hence, we report for the first time the phenotypic impact of G-quadruplex targeting with a ligand in a vertebrate organism. This study has unveiled not only G-quadruplex targeting in non-human animal species but also the potential that G-quadruplexes can provide a ready tool for understanding the phenotypic effects of targeting certain important genes involved in differentiation and developmental processes in a living eukaryotic organism.

}, issn = {0006-2960}, doi = {10.1021/bi4009352}, author = {Agarwal, Tani and Lalwani, Mukesh Kumar and Kumar, Santosh and Roy, Saumya and Chakraborty, Tushar Kanti and Sivasubbu, Sridhar and Maiti, Souvik} } @article { ISI:000340768000019, title = {New approach of blending polymeric ionic liquid with polybenzimidazole (PBI) for enhancing physical and electrochemical properties}, journal = {Journal of Materials Chemistry A}, volume = {2}, number = {35}, year = {2014}, month = {JUN}, pages = {14449-14458}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Although the use of ionic liquids (IL) in polymeric membranes is known to elevate the electrochemical performance for proton exchange membrane-based fuel cells (PEMFC), they suffer from drawbacks such as IL drain and lowering in mechanical properties that lead to deterioration in PEMFC performance. To mitigate these issues, we report, for the first time, the use of polymeric ionic liquid (PIL), namely, poly(diallyl dimethyl ammonium trifluoride methane sulphonate) (P[DADMA][TFMS]) to be blended with polybenzimidazole (PBI-I) as a membrane material for PEMFC. PBI-I and (P[DADMA][TFMS]) were chosen because they form miscible blends and are suitable for acid doping as a matrix, which can eventually be used as proton conductor. The structure, miscibility and inter-polymer interactions were studied by infrared (IR) spectroscopy and differential scanning calorimetry (DSC). The increase in proton conduction in comparison to the PBI membranes was observed due to the presence of ionic groups of PILs in blend membranes. With the increase in PIL content, the proton conductivity of the composite membranes gradually increased from 0.04 S cm(-1) for PBI to 0.07 S cm(-1) for the blend membrane at 150 degrees C. The MEAs were fabricated with PBI-I, PBI-PIL15, PBI-PIL25 and PBI-PIL35. Corresponding single cells were successfully tested at temperatures of 160 degrees C. The maximum power density and current density obtained were 515 mW cm(-2) and 1632 mA cm(-2), respectively, for PBI-PIL25-based MEA.

}, issn = {2050-7488}, doi = {10.1039/c4ta02184c}, author = {Rewar, Anita S. and Chaudhari, Harshal D. and Illathvalappil, Rajith and Sreekumar, K. and Kharul, Ulhas K.} } @article { ISI:000331819800001, title = {Non-coding RNA interact to regulate neuronal development and function}, journal = {Frontiers in Cellular Neuroscience}, volume = {8}, year = {2014}, month = {FEB}, pages = {47}, publisher = {FRONTIERS RESEARCH FOUNDATION}, address = {PO BOX 110, LAUSANNE, 1015, SWITZERLAND}, abstract = {

The human brain is one of the most complex biological systems, and the cognitive abilities have greatly expanded compared to invertebrates without much expansion in the number of protein coding genes. This suggests that gene regulation plays a very important role in the development and function of nervous system, by acting at multiple levels such as transcription and translation. In this article we discuss the regulatory roles of three classes of non-protein coding RNAs (ncRNAs)-microRNAs (miRNAs), piwi-interacting RNA (piRNAs) and long-non-coding RNA (lncRNA), in the process of neurogenesis and nervous function including control of synaptic plasticity and potential roles in neurodegenerative diseases. miRNAs are involved in diverse processes including neurogenesis where they channelize the cellular physiology toward neuronal differentiation. miRNAs can also indirectly influence neurogenesis by regulating the proliferation and self renewal of neural stem cells and are dysregulated in several neurodegenerative diseases. miRNAs are also known to regulate synaptic plasticity and are usually found to be co-expressed with their targets. The dynamics of gene regulation is thus dependent on the local architecture of the gene regulatory network (GRN) around the miRNA and its targets. piRNAs had been classically known to regulate transposons in the germ cells. However, piRNAs have been, recently, found to be expressed in the brain and possibly function by imparting epigenetic changes by DNA methylation. piRNAs are known to be maternally inherited and we assume that they may play a role in early development. We also explore the possible function of piRNAs in regulating the expansion of transposons in the brain. Brain is known to express several lncRNA but functional roles in brain development are attributed to a few lncRNA while functions of most of the them remain unknown. We review the roles of some known lncRNA and explore the other possible functions of lncRNAs including their interaction with miRNAs.

}, keywords = {gene expression regulation, lncRNA, miRNA, network-motifs, piRNA}, issn = {1662-5102}, doi = {10.3389/fncel.2014.00047}, author = {Iyengar, Bharat R. and Choudhary, Ashwani and Sarangdhar, Mayuresh A. and Venkatesh, K. V. and Gadgil, Chetan J. and Pillai, Beena} } @article { ISI:000345641400039, title = {Non-uniform early structural response of globular proteins to cold denaturing conditions: a case study with Yfh1}, journal = {Journal of Chemical Physics}, volume = {141}, number = {20}, year = {2014}, month = {NOV}, pages = {205103}, publisher = {AMER INST PHYSICS}, type = {Article}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

The mechanism of cold denaturation in proteins is often incompletely understood due to limitations in accessing the denatured states at extremely low temperatures. Using atomistic molecular dynamics simulations, we have compared early (nanosecond timescale) structural and solvation properties of yeast frataxin (Yfh1) at its temperature of maximum stability, 292 K (T-s), and the experimentally observed temperature of complete unfolding, 268 K (T-c). Within the simulated timescales, discernible {\textquoteleft}{\textquoteleft}global{\textquoteright}{\textquoteright} level structural loss at T-c is correlated with a distinct increase in surface hydration. However, the hydration and the unfolding events do not occur uniformly over the entire protein surface, but are sensitive to local structural propensity and hydrophobicity. Calculated infrared absorption spectra in the amide-I region of the whole protein show a distinct red shift at T-c in comparison to T-s. Domain specific calculations of IR spectra indicate that the red shift primarily arises from the beta strands. This is commensurate with a marked increase in solvent accessible surface area per residue for the beta-sheets at T-c. Detailed analyses of structure and dynamics of hydration water around the hydrophobic residues of the beta-sheets show a more bulk water like behavior at T-c due to preferential disruption of the hydrophobic effects around these domains. Our results indicate that in this protein, the surface exposed beta-sheet domains are more susceptible to cold denaturing conditions, in qualitative agreement with solution NMR experimental results. (C) 2014 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4901897}, author = {Chatterjee, Prathit and Bagchi, Sayan and Sengupta, Neelanjana} } @article { ISI:000334895800011, title = {Novel catalysts for valorization of biomass to value-added chemicals and fuels}, journal = {Journal of Chemical Sciences}, volume = {126}, number = {2, SI}, year = {2014}, note = {21st National Symposium on Catalysis (CATSYMP), CSIR Indian Inst Chem Technol, Hyderabad, INDIA, FEB 11-13, 2013}, month = {MAR}, pages = {403-413}, publisher = {Catalysis Soc India}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Key furan compounds such as 5-hydroxymethylfurfural (HMF), 2,5-furandicarboxylic acid (FDCA) and 2,5-dimethylfuran (DMF) were synthesized from renewable feedstocks. Dehydration of fructose was carried out in biphasic conditions employing several solid acid catalysts by targeting selective formation of HMF. Its selectivity is linearly dependent on total acidity clearly revealing that lower acidity favours selective formation of HMF. Oxidation and hydrogenolysis of HMF has been explored using 2 wt\% Ru-K-OMS-2. The catalysts used for each transformation were subjected to detailed characterization using XRD, BET surface area, temperature-programmed desorption and transmission electron microscopy. The effect of various reaction parameters was also investigated for obtaining high yields of desired chemical intermediates. High FDCA yields of 93.4 mol\% and 66 mol\% were achieved in alkaline and base-free conditions, respectively. The 2 wt\% Ru-K-OMS-2 is a versatile catalyst as it also catalyses HMF hydrogenolysis giving 33 mol\% of DMF. Thus, utility of various novel materials as catalysts has been demonstrated in the multistep transformations of hexoses to furan-based fuels and chemicals.

}, keywords = {2, 5-dimethylfuran, 5-furan dicarboxylic acid, 5-hydroxymethyl furfural, dehydration, fructose}, issn = {0974-3626}, author = {Lucas, Nishita and Kanna, Narasimha Rao and Nagpure, Atul S. and Kokate, Ganesh and Chilukuri, Satyanarayana V.} } @article { ISI:000341083400001, title = {Novel, concise and efficient protocol for non-natural piperidine compounds}, journal = {RSC Advances}, volume = {4}, number = {62}, year = {2014}, month = {JUL}, pages = {32594-32598}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Formal synthesis of L-altro-1-deoxynojirimycin, cis-3-hydroxypipecolic acid along with synthesis of (R)-piperidinol and a conceptually different advanced intermediate for non-natural piperidine alkaloids is reported from cis-butene-1,4-diol. The key reactions involved are Johnson-Claisen rearrangement, Sharpless asymmetric dihydroxylation, reductive lactamization and novel regioselective elimination.

}, issn = {2046-2069}, doi = {10.1039/c4ra04558k}, author = {Chavan, Subhash P. and Dumare, Nilesh B. and Pawar, Kailash P.} } @article { ISI:000340513400023, title = {Novel fluorescence probe for estimation of cysteine/histidine in human blood plasma and recognition of endogenous cysteine in live Hct116 cells}, journal = {Chemical Communications}, volume = {50}, number = {69}, year = {2014}, month = {SEP}, pages = {9899-9902}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new Cu(II)-complex is used as a {\textquoteleft}{\textquoteleft}Turn-On{\textquoteright}{\textquoteright} luminescence probe for specific detection of endogenous Cys in live Hct116 cells and Cys present in human blood plasma without any interference from other amino acids, especially GSH and Hcy. Difference in the mechanistic pathway for Cys and His recognition is discussed.

}, issn = {1359-7345}, doi = {10.1039/c4cc04214j}, author = {Reddy, Upendar G. and Agarwalla, Hridesh and Taye, Nandaraj and Ghorai, Suvankar and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000344382800045, title = {One-pot synthesis of ultrasmall MoO3 nanoparticles supported on SiO2, TiO2, and ZrO2 nanospheres: an efficient epoxidation catalyst}, journal = {Journal of Materials Chemistry A}, volume = {2}, number = {44}, year = {2014}, month = {SEP}, pages = {19060-19066}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Ultrasmall molybdenum oxide (MoO3) nanoparticles supported on various (SiO2, TiO2 or ZrO2) nanospheres were synthesized in one pot using a reverse micelle method. The prepared catalysts were thoroughly characterized by various physico-chemical methods. TEM images showed uniform dispersion of MoO3 nanoparticles (1.5-4 nm) onto silica (similar to 275 nm). No separate MoO3 particles were identified from TEM for MoO3/TiO2 (similar to 10.5 nm) and MoO3/ZrO2 (similar to 6.5 nm) because AHM reacted with titanium and zirconium hydroxides to form solid solution. Among the prepared catalysts MoO3/SiO2 showed excellent catalytic activity (up to 90\% conversion and 100\% epoxide selectivity) for olefin epoxidation. The catalyst was successfully recycled up to five cycles without losing much activity and selectivity.

}, issn = {2050-7488}, doi = {10.1039/c4ta03754e}, author = {Chandra, Prakash and Doke, Dhananjay S. and Shubhangi B. Umbarkar and Biradar, Ankush V.} } @article { ISI:000341017700012, title = {Optimization of the anti-cancer activity of the phosphatidylinositol-3 kinase pathway inhibitor PITENIN-1: switching thiourea with 1,2,3-triazole}, journal = {Medchemcomm}, volume = {5}, number = {9}, year = {2014}, month = {SEP}, pages = {1359-1363}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We previously reported encouraging in vitro and in vivo anti-cancer activity of N-((3-chloro-2-hydroxy-5-nitrophenyl)carbamothioyl) benzamide (termed PITENIN-1). In the current work, we describe the structure-activity relationship study of the PIT-1 series, based on the replacement of a central thiourea unit with 1,2,3-triazole, which leads to increased liver microsomal stability, drug likeness and toxicity towards cancer cells.

}, issn = {2040-2503}, doi = {10.1039/c4md00109e}, author = {Kommagalla, Yadagiri and Cornea, Sinziana and Riehle, Robert and Torchilin, Vladimir and Degterev, Alexei and Ramana, Chepuri V.} } @article { ISI:000327380800001, title = {Pd-Phosphinesulfonate bravely battles the {\textquoteleft}{\textquoteleft}vinyl halide insertion copolymerization{\textquoteright}{\textquoteright} barricade}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {52}, number = {1}, year = {2014}, month = {JAN}, pages = {1-6}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

This overview provides insights into the current state-of-the-art solutions to insertion copolymerization of functional olefinic monomers. The challenges in insertion copolymerization of functional olefinic monomers, with a special emphasis on vinyl halides, are highlighted. The crucial design of the Pd-phosphinesulfonate [Pd(PO)] enables up to 3.6 mol \% incorporation of vinyl fluoride (VF) in an ethylene-VF copolymerization reaction. In a significant development, insertion copolymerization of industrially relevant functional olefin, that is, vinyl chloride (VC), was unambiguously ascertained, and a detectable amount of VC (0.4 mol \%) was incorporated (at the chain end). In a detailed investigation, the in situ existence of (PO)PdH species during the polymerization was revealed, and it was demonstrated that these are indeed responsible for VC incorporation. (c) 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 1-6

}, keywords = {functional olefin, insertion copolymerization, palladium catalyst, phosphinesulfonate, vinyl chloride}, issn = {0887-624X}, doi = {10.1002/pola.26968}, author = {Gaikwad, Shahaji R. and Deshmukh, Satej S. and Chikkali, Samir H.} } @article { ISI:000335720200011, title = {Phosphoric acid loaded azo (-N=N-) based covalent organic framework for proton conduction}, journal = {Journal of the American Chemical Society}, volume = {136}, number = {18}, year = {2014}, month = {MAY}, pages = {6570-6573}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Two new chemically stable functional crystalline covalent organic frameworkds (COFs) (Tp-Azo and Tp-Stb) were synthesized using the Schiff base reaction between triformylphloroglucinol (Tp) and 4,4{\textquoteright}-azodianiline (Azo) or 4,4{\textquoteright}-diaminostilbene (Stb), respectively. Both COFs show the expected keto-enamine form, and high stability toward boiling water, strong acidic, and basic media. H3PO4 doping in Tp-Azo leads to immobilization of the acid within the porous framework, which facilitates proton conduction in both the hydrous (sigma = 9.9 X 10(-4) S cm(-1)) and anhydrous state (sigma = 6.7 X 10(-5) S cm-1). This report constitutes the first emergence of COFs as proton conducting materials.

}, issn = {0002-7863}, doi = {10.1021/ja502212v}, author = {Chandra, Suman and Kundu, Tanay and Kandambeth, Sharath and BabaRao, Ravichandar and Marathe, Yogesh N. and Kunjir, Shrikant M. and Banerjee, Rahul} } @conference { ISI:000352795700039, title = {Photo-enhanced field emission studies of tapered CdS nanobelts}, booktitle = {2014 27th International Vacuum Nanoelectronics Conference (IVNC) }, series = {International Vacuum Nanoelectronics Conference}, year = {2014}, note = {27th International Vacuum Nanoelectronics Conference (IVNC), Engelberg, SWITZERLAND, JUL 06-10, 2014}, month = {JUL}, publisher = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, organization = {Paul Scherrer Inst; EMPA, Mat Sci \& Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc}, address = {345 E 47th St, New York, NY 10017 USA}, abstract = {

Field emission and photo-enhanced field emission characteristics of single crystalline tapered CdS nanobelts have been investigated. The turn-on field for the emission current density of similar to 0.1 mu A/cm(2) is found to be similar to 2.1 V/mu m, which is much lower than reported values for various CdS nanostructures. The photo-enhanced field emission current shows a reproducible photo-switching behavior with rise in current level nearly four times that of its initial preset value (similar to 1 mu A) which is found to be very remarkable. Possible mechanism of photo-enhanced field emission is discussed.

}, keywords = {Current stability, field emission, Nanobelts, Photoswitching}, isbn = {978-1-4799-5306-6}, issn = {2164-2370}, author = {Chavan, Padmakar G. and More, Mahendra A. and Joag, Dilip S. and Badadhe, Satish S. and Mulla, Imtiaz S.}, editor = {Tsujino, S. and Gobrecht, J. and Paraliev, M. and Braun, H. H. and Groening, O. and Feurer, T.} } @article { ISI:000330822000009, title = {Polystyrene/TiO2 composite electrospun fibers as fillers for poly(butylene succinate-co-adipate): Structure, morphology and properties}, journal = {European Polymer Journal}, volume = {50}, year = {2014}, month = {JAN}, pages = {78-86}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In this work, composite polystyrene/titanium dioxide (PS/TiO2) electrospun fibers were used as a reinforcement for a poly(butylene succinate-co-adipate) (PBSA) matrix. The structure, morphology, mechanical properties and degradation behavior of such materials were investigated, finding that, as a function of their TiO2 content, the fibers exerted different effects. The main mechanism through which the fibers modified the structure and morphology of the polymer matrix is by altering its crystallization kinetics. The presence of TiO2 modified the roughness of the fibers and therefore affected the interfacial adhesion between the filler and the matrix. The modulus of PBSA was improved, even though the brittleness of the materials was increased by the presence of the fibers. Different amounts of TiO2 within the fibers allowed to tune the hydrolytic degradation rate of the composites. This paper shows the potential of using composite electrospun fibers as effective fillers for the preparation of polymer-based composites. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {Biodegradable polymers, Degradation, electrospinning, Morphology, Nanocomposites, Polycaprolactone}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2013.11.002}, author = {Neppalli, Ramesh and Causin, Valerio and Benetti, Edmondo Maria and Ray, Suprakas Sinha and Esposito, Antonella and Wanjale, Santosh and Birajdar, Mallinath S. and Saiter, Jean-Marc and Marigo, Antonio} } @article { ISI:000345826100018, title = {Preferential growth of Au on CdSe quantum dots using langmuir-blodgett technique}, journal = {RSC Advances}, volume = {4}, number = {110}, year = {2014}, month = {NOV}, pages = {64535-64541}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Oleyl amine capped CdSe quantum dots (QD) were synthesised by hot injection technique. These QDs formed a self-assembled monolayer on an aqueous subphase of a Langmuir-Blodgett (LB) trough. Here, in this report we introduced a simple but very efficient route to form a metal (Au)-QD hybrid nanostructure via the LB technique. In this method, the metal counterpart of the hybrid nanostructure could be deposited exclusively on one side of the QDs. The formation of stable monolayer of QDs was evidenced from a surface pressure-area (P-A) isotherm. The development of gold tip was confirmed and monitored by detailed TEM study on the monolayer deposited on TEM grids from the LB trough. Other characterizations like UV-Vis spectroscopy, FTIR, XPS and EDX also suggested the same. Oleyl amine was shown to act both as a reducing agent as well as a capping agent in this strategy.

}, issn = {2046-2069}, doi = {10.1039/c4ra11715h}, author = {Das, Subhasis and Satpati, Biswarup and Chauhan, Himani and Deka, Sasanka and Gopinath, Chinnakonda S. and Bala, Tanushree} } @article {46405, title = {Protecting group free and scalable approach towards total synthesis of (-)-venlafaxine}, journal = {RSC Advances}, volume = {4}, year = {2014}, month = {FEB}, pages = {14468-14470}, type = {Article}, abstract = {

A protecting group free asymmetric total synthesis of (-)-venlafaxine is reported. The strategy employs Sharpless epoxidation and regio-selective epoxide ring opening by an in situ generated Gilman reagent as key steps. This paper reports a 53\% overall yield in 6 steps for total synthesis of (-)-venlafaxine.

}, issn = {2046-2069}, doi = {10.1039/c4ra00840e}, author = {Chavan, Subhash P. and Pawar, Kailash P. and Garai, Sumanta} } @article { ISI:000342328300031, title = {Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {18}, year = {2014}, month = {SEP}, pages = {15881-15888}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.

}, keywords = {field emission, MoS2, photodiode heterostructures, pulsed laser deposition, thin film}, issn = {1944-8244}, doi = {10.1021/am503464h}, author = {Late, Dattatray J. and Shaikh, Parvez A. and Khare, Ruchita T. and Kashid, Ranjit V. and Chaudhary, Minakshi V. and More, Mahendra A. and Ogale, Satishchandra B.} } @article { ISI:000336442600003, title = {Rapid efficient synthesis and characterization of silver, gold, and bimetallic nanoparticles from the medicinal plant plumbago zeylanica and their application in biofilm control}, journal = {International Journal of Nanomedicine}, volume = {9}, year = {2014}, month = {MAY}, pages = {2635-2653}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Background: Nanoparticles (NPs) have gained significance in medical fields due to their high surface-area-to-volume ratio. In this study, we synthesized NPs from a medicinally important plant - Plumbago zeylanica. Materials and methods: Aqueous root extract of P. zeylanica (PZRE) was analyzed for the presence of flavonoids, sugars, and organic acids using high-performance thin-layer chromatography (HPTLC), gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), and biochemical methods. The silver NPs (AgNPs), gold NPs (AuNPs), and bimetallic NPs (AgAuNPs) were synthesized from root extract and characterized using ultraviolet-visible spectra, X-ray diffraction (XRD), energy-dispersive spectrometry (EDS), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The effects of these NPs on Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli biofilms were studied using quantitative biofilm inhibition and disruption assays, as well as using fluorescence, scanning electron microscopy, and atomic force microscopy. Results: PZRE showed the presence of phenolics, such as plumbagin, and flavonoids, in addition to citric acid, sucrose, glucose, fructose, and starch, using HPTLC, GC-TOF-MS, and quantitative analysis. Bioreduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) were confirmed at absorbances of 440 nm (AgNPs), 570 nm (AuNPs), and 540 nm (AgAuNPs), respectively. The maximum rate of synthesis at 50 degrees C was achieved with 5 mM AgNO3 within 4.5 hours for AgNPs; and with 0.7 mM HAuCl4 within 5 hours for AuNPs. The synthesis of AgAuNPs, which completed within 90 minutes with 0.7 mM AgNO3 and HAuCl4, was found to be the fastest. Fourier-transform infrared spectroscopy confirmed bioreduction, while EDS and XRD patterns confirmed purity and the crystalline nature of the NPs, respectively. TEM micrographs and DLS showed about 60 nm monodispersed Ag nanospheres, 20-30 nm Au nanospheres adhering to form Au nanotriangles, and about 90 nm hexagonal blunt-ended AgAuNPs. These NPs also showed antimicrobial and antibiofilm activity against E. coli, A. baumannii, S. aureus, and a mixed culture of A. baumannii and S. aureus. AgNPs inhibited biofilm in the range of 96\%-99\% and AgAuNPs from 93\% to 98\% in single-culture biofilms. AuNPs also showed biofilm inhibition, with the highest of 98\% in S. aureus. AgNPs also showed good biofilm disruption, with the highest of 88\% in A. baumannii. Conclusion: This is the first report on rapid and efficient synthesis of AgNPs, AuNPs and AgAuNPs from P. zeylanica and their effect on quantitative inhibition and disruption of bacterial biofilms.

}, keywords = {AgAuNPs, AgNPs, AuNPs, biofilm inhibition and disruption, GC-TOF-MS, P. zeylanica}, issn = {1178-2013}, doi = {10.2147/IJN.S59834}, author = {Salunke, Gayatri R. and Ghosh, Sougata and Kumar, R. J. Santosh and Khade, Samiksha and Vashisth, Priya and Kale, Trupti S. and Chopade, Snehal and Pruthi, Vikas and Kundu, Gopal and Bellare, Jayesh R. and Chopade, Balu Ananda} } @article {46379, title = {Role of hydrogen bonding in pseudocapacitance of covalent organic frameworks}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAR}, pages = {C1149}, type = {Meeting Abstract}, keywords = {COF, H-bonding, pseudocapacitance}, issn = {2053-2733}, author = {Chandra, Suman and Banerjee, Rahul} } @article { ISI:000330953700014, title = {Roseovarius azorensis sp nov., isolated from seawater at espalamaca, azores}, journal = {Antonie van Leeuwenhoek International Journal of General and Molecular Microbiology}, volume = {105}, number = {3}, year = {2014}, month = {MAR}, pages = {571-578}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A Gram-negative, motile, non-spore forming, rod shaped aerobic bacterium, designated strain SSW084(T), was isolated from a surface seawater sample collected at Espalamaca (38A degrees 33{\textquoteright}N; 28A degrees 39{\textquoteright}W), Azores. Growth was found to occur from 15 to 40 A degrees C (optimum 30 A degrees C), at pH 7.0-9.0 (optimum pH 7.0) and with 25-100 \% seawater or 0.5-7.0 \% NaCl in the presence of Mg2+ and Ca2+; no growth was found with NaCl alone. Colonies on seawater nutrient agar were observed to be punctiform, white, convex, circular, smooth, and translucent. Strain SSW084(T) did not grow on Zobell marine agar and tryptic soy agar even when seawater supplemented. The major respiratory quinone was found to be Q-10 and the G + C content was determined to be 61.9 mol\%. Phylogenetic analysis based on the 16S rRNA gene sequence indicated that strain SSW084(T) belongs to the genus Roseovarius and that its closest neighbours are Roseovarius tolerans EL-172(T), Roseovarius mucosus DFL-24(T) and Roseovarius lutimaris 112(T) with 95.7, 95.4 and 95.3 \% sequence similarity respectively. The remaining species of Roseovarius showed \< 95 \% similarity. The polar lipids of strain SSW084(T) were determined to be phosphatidylethanolamine, diphosphatidylglycerol, phosphatidylglycerol, phosphatidylcholine, an unidentified lipid and one unidentified aminolipid. The major fatty acids identified were identified as C-18:1 omega 7c (52.5 \%) and C-16:0 (13.8 \%). On the basis of phenotypic, molecular and chemotaxonomic characteristics, strain SSW084(T) is considered to represent a novel species of the genus Roseovarius, for which Roseovarius azorensis sp. nov is proposed. The type strain is SSW084(T) (=KCTC 32421(T) = MTCC 11812(T)).

}, keywords = {Espalamaca, Polyphasic taxonomy, Roseovarius azorensis sp nov, Seawater}, issn = {0003-6072}, doi = {10.1007/s10482-013-0109-9}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Dastager, Syed Gulam and Liu, Qing and Thi-Nhan Khieu and Chu Ky Son and Li, Wen-Jun and Colaco, Ana} } @article { ISI:000346214100014, title = {SBA-15 intercalated Mg-Al hydrotalcite: an environmental friendly catalyst for hydroisomerization of olefin}, journal = {Applied Catalysis A-General}, volume = {488}, year = {2014}, month = {NOV}, pages = {119-127}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

SBA-15 Molecular sieve-intercalated Mg-Al hydrotalcite (MASBA-HT) was synthesized for the first time by a simple straightforward method. The intercalation of SBA-15 molecular sieve between the interlayer of HT was evident from powder XRD, TEM and FT-IR studies. The presence of SBA-15 facilitates retention of the layered structure for first time, even after calcination at high temperature of 550 degrees C. The resultant material possesses moderate acidity which comes from incorporation of aluminum into the framework of SBA-15 and also contained soluble basicity similar to HT materials. The material shows promising activity for hydroisomerization of 1-octene resulting in good substrate conversion (80\%) and branched isomers selectivity (45\%). The catalytic activity remains constant over longer duration and repeated runs. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Branched alkenes, Hydroisomerization, Intercalated-hydrotalcite, layered materials, Mesoporous SBA-15}, issn = {0926-860X}, doi = {10.1016/j.apcata.2014.09.024}, author = {Baskaran, Thangaraj and Christopher, Jayaraj and Ajithkumar, Thalasseril G. and Sakthivel, Ayyamperumal} } @article { ISI:000342873800010, title = {Short enantioselective total synthesis of (R)- and (S)-pipecolic acid}, journal = {Tetrahedron-Asymmetry}, volume = {25}, number = {16-17}, year = {2014}, month = {SEP}, pages = {1246-1251}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A convenient and practical total synthesis of (R)- and (S)-pipecolic acid has been achieved by utilizing chiral cis-aziridine-2-carboxylate as the common synthetic precursor. The synthesis involves regioselective reductive cleavage of the aziridine ring and Wittig olefination as key reactions. (C) 2014 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2014.08.001}, author = {Chavan, Subhash P. and Khairnar, Lalit B. and Chavan, Prakash N. and Kalbhor, Dinesh B.} } @article { ISI:000335559100055, title = {Solvothermal synthesis of mesoporous manganese oxide with enhanced catalytic activity for veratryl alcohol oxidation}, journal = {RSC Advances}, volume = {4}, number = {37}, year = {2014}, month = {APR}, pages = {19450-19455}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Catalyst activities of manganese and cobalt oxides prepared by solvothermal and co-precipitation methods were studied for veratryl alcohol oxidation. Manganese oxides showed higher activity performance than that of cobalt oxides irrespective of the method of preparation. The solvothermal method yielded mesoporous manganese oxide without using any template giving mixed phases of monoclinic Mn5O8 and hausmannite Mn3O4. The mesoporous manganese oxide exhibited excellent activity for liquid phase aerobic oxidation of veratryl alcohol under base free conditions, with 90\% conversion and almost complete selectivity towards veratraldehyde. The detailed characterization results on morphology, size and composition of the prepared mesoporous manganese oxide obtained by XRD, XPS, H-2-TPR, N-2 adsorption-desorption isotherms, FESEM and HR-TEM techniques were used to understand the role of morphological and structural features in enhancement of the observed catalytic activity.

}, issn = {2046-2069}, doi = {10.1039/c4ra00184b}, author = {Jha, Ajay and Chandole, Tejansh and Pandya, Rajan and Roh, Hyun-Seog and Rode, Chandrashekhar V.} } @article { ISI:000344244700034, title = {Specific probe for Hg2+ to delineate even H+ in pure aqueous buffer/Hct116 colon cancer cells: Hg(II)-eta(2)-arene pi-interaction and a TBET-based fluorescence response}, journal = {Chemical Communications}, volume = {50}, number = {92}, year = {2014}, month = {SEP}, pages = {14421-14424}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new molecular probe that demonstrates a distinct TBET process, induced by the Hg(II)-eta(2)-arene pi-interaction, in pure aqueous medium with a large pseudo-Stokes shift of 200 nm.

}, issn = {1359-7345}, doi = {10.1039/c4cc06740a}, author = {Reddy, Upendar G. and Ramu, Vadde and Roy, Sovan and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000345660300032, title = {Stereospecific synthetic approach towards tamiflu using the ramberg-backlund reaction from cysteine hydrochloride}, journal = {RSC Advances}, volume = {4}, number = {107}, year = {2014}, month = {NOV}, pages = {62281-62284}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The stereospecific formal synthesis of Tamiflu from L-cysteine hydrochloride as the chiral source is described. The notable feature of the present strategy is the Ramberg-Backlund reaction and Sharpless-Reich protocol as the key chemical transformations to access the cyclohexene skeleton of Tamiflu.

}, issn = {2046-2069}, doi = {10.1039/c4ra10391b}, author = {Chavan, Subhash P. and Chavan, Prakash N. and Gonnade, Rajesh G.} } @article {46378, title = {Structure of highly active BSH enzyme with subordinated post-translational excision}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAR}, pages = {C272}, type = {Meeting Abstract}, keywords = {Bile salt hydrolase, Mutagenesis, X-ray crystallography}, issn = {2053-2733}, author = {Chand, Deepak and Panigrahi, Priyabrata and Ramasamy, Sureshkumar and Suresh, C. G.} } @article { ISI:000344998700012, title = {Structure-property relationship in charge transporting behaviour of room temperature liquid crystalline perylenebisimides}, journal = {Journal of Materials Chemistry C}, volume = {2}, number = {46}, year = {2014}, month = {OCT}, pages = {9882-9891}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A homologous series of pentadecyl phenol functionalized perylenebisimide (PBI) terminated with trialkoxy gallate esters was synthesized, where the terminal alkyl chain length was varied from n = 4 to 12 (PBI-En). The thermotropic liquid crystalline (LC) characteristics of the molecules were analyzed using differential scanning calorimetry (DSC), polarized light microscopy (PLM) combined with variable temperature wide angle X-ray diffraction (WXRD) techniques. A clear odd-even oscillation was observed in the melting as well as isotropization enthalpies as a function of alkyl spacer length in the terminal gallate unit, with the even spacers exhibiting higher values. The higher members of the series with n \> 8 exhibited thermotropic liquid crystalline textures in the PLM, which remained stable until room temperature. The nature of the LC phase was identified to be columnar rectangular and columnar hexagonal based on detailed analysis of the WXRD pattern recorded in the LC phase. The WXRD pattern of the room temperature LC frozen samples indicated a nearly constant intra columnar stack distance of similar to 3.7 angstrom for all the members. The space-charge-limited current (SCLC) values of the LC frozen sample films were analyzed for dependence of the bulk mobility estimate on the nature of the LC phase. The columnar hexagonal phase exhibited a mobility value one order (10(-3) cm(2) V-1 s(-1)) higher than that of crystalline (10(-4) cm(2) V-1 s(-1)) and two orders higher than that of columnar rectangular phase (10(-5) cm(2) V-1 s(-1)), indicating a strong dependence of packing on bulk mobility.

}, issn = {2050-7526}, doi = {10.1039/c4tc01806k}, author = {Prajitha, K. P. and Chithiravel, Sundaresan and Krishnamoorthy, K. and Asha, S. K.} } @article {46377, title = {Supramolecular gel to metal organic framework transformation}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAR}, pages = {C526}, type = {Meeting Abstract}, keywords = {gel, MOF, Supramolecular}, issn = {2053-2733}, author = {Chakraborty, Amit and Banerjee, Rahul} } @article { ISI:000340017000020, title = {Sustainable polyacetals from isohexides}, journal = { Green Chemistry}, volume = {16}, number = {8}, year = {2014}, month = {AUG}, pages = {3810-3818}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A single step synthetic protocol to access a small family of renewable diacetals was established. The resultant chiral diacetals are valuable building blocks in pharmaceuticals and materials science. To demonstrate their synthetic competence, isohexide-diacetals (2a-c) were subjected to acetal metathesis polymerization and the corresponding polymers (poly2a-c) were isolated as white solids with molecular weights in the range 3200-27 600 (g mol(-1)). The semi-crystalline polymers displayed glass transition temperatures between 38-65 degrees C and melting temperatures in the range 103-156 degrees C. The isohexide derived polyacetats are stable under practical washing and rinsing conditions but degrade in slightly acidic media.

}, issn = {1463-9262}, doi = {10.1039/c4gc00543k}, author = {Rajput, B. S. and Gaikwad, S. R. and Menon, Shamal K. and Chikkali, Samir H.} } @article { ISI:000364541100006, title = {Syntheses, X-ray structures, catalytic activity and magnetic properties of two new coordination polymers of Co(II) and Ni(II) based on benzenedicarboxylate and linear N,N {\textquoteleft}-donor Schiff base linkers}, journal = {Inorganic Chemistry Frontiers}, volume = {1}, number = {5}, year = {2014}, month = {APR}, pages = {414-425}, abstract = {

{Two isostructural coordination polymers based on Co(II) and Ni(II), {[M(azpy)(3)(p-bdc)(2)(H2O)(4)]center dot(CH3OH)(2)(H2O)(3)}(n) [where M = Co (1) and Ni (2); azpy = N,N{\textquoteright}-bis-pyridin-4-ylmethylene-hydrazine and p-bdc = 1,4-benzenedicarboxylate], have been synthesized using mixed ligand systems at room temperature and characterized by single-crystal X-ray diffraction and other physicochemical methods. Structure determination reveals that both the complexes crystallize in the monoclinic space group C2/c and exhibit one-dimensional (1D) ladder like structures constructed by p-bdc and azpy ligands in which Schiff base (azpy) linkers serve as a bridging as well as pendent ligands. These pendent ligands are involved in H-bonding and pi-pi interactions with lattice water, methanol molecules and bridging azpy ligands, to form the 3D supramolecular structure. Notably, both the frameworks efficiently catalyze the Knoevenagel condensation reactions of a wide range of substituted benzaldehydes with active methylene compounds in heterogeneous medium under environmentally friendly conditions and the products were obtained in excellent yields. These catalysts were also found to exhibit excellent recyclability and re-usability without any significant loss of activity. A variable temperature magnetic study of both compounds was carried out and their magnetic properties justified on the basis of their crystal structure.

}, author = {Bhattacharya, Biswajit and Maity, Dilip Kumar and Pachfule, Pradip and Colacio, Enrique and Ghoshal, Debajyoti} } @article { ISI:000333231700009, title = {Synthesis and characterization of azoxy based mesogenic diols}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {53}, number = {3}, year = {2014}, month = {MAR}, pages = {359-362}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

Azoxy based rigid mesogenic diols have been synthesized using two steps. Phenol/cresol is used as starting material. Synthesized diols are characterized by IR, H-1 and C-13 NMR, and mass spectroscopic methods. Thermal properties have been determined by thermo gravimetric analysis method and crystallinity patterns have been obtained by wide angle X-ray diffiactogram. Substituted phenol (methyl) is used to study the effect of substitution on physical and thermal properties of rigid azoxy mesogenic diol. The detailed characterization of azoxy based rigid diols is reported in this communication, which is highly useful for fundamental and applied research, particularly in liquid crystals and liquid crystalline polymers. The experimental results reveal that phenol based rigid mesogenic diols have high thermal stability and degree of crystallinity than methyl substituted rigid mesogenic diols.

}, keywords = {Azoxy, degree of crystallinity, diol, mesogen, phenol, thermal stability}, issn = {0376-4699}, author = {Mulani, Khudbudin Baban and Ganjave, Nitin V. and Chavan, Nayaku} } @article { ISI:000343341100006, title = {Synthesis and characterization of hypercrosslinked hydroxyl functionalized co-polymer beads}, journal = {European Polymer Journal}, volume = {59}, year = {2014}, month = {OCT}, pages = {46-58}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Hydroxyl functionalized beaded copolymers were synthesized from 2-hydroxy ethyl methacrylate by suspension polymerization using two different crosslinking agents (EDMA, DVB) and diluents (1,1,2,2-tetrachloroethane, 1,2-dichlorobenzene). Microporous beads with high surface area were successfully synthesized and characterized by different techniques. Maximum surface area obtained was 564 m(2)/g bearing uniform, spherical as well as non-aggregation images of beads. Thermal properties such as DTG and DSC reveal that, type of crosslinker (flexible/rigid) is major while its concentration is minor parameter that affect decomposition and softening temperature of copolymer. Swelling ratio of copolymer beads was examined as a function of crosslinker and crosslink density. Swelling behavior is in accordance with copolymer-solvent interaction parameter. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Copolymer, Morphology, surface area, Suspension polymerization, Swelling ratio}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2014.07.001}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article { ISI:000336353000001, title = {Synthesis and characterization of triad based rigid mesogenic diols derived from hydroquinone and 4-hydroxybenzoic acid}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {53}, number = {5}, year = {2014}, month = {MAY}, pages = {591-596}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

Triad based rigid mesogenic diols have been synthesized by four step synthesis method using protection-deprotection method. Hydroquinone and 4-hydroxy benzoic acid have been used as starting materials. Synthesized diols have been characterized by IR, H-1 and C-13 NMR, and mass spectroscopic methods. Thermal properties have been determined by thermo gravimetric analysis method and degree of crystallinity have been measured by wide angle X-ray technique. Substituted hydroquinones (methyl and chloro) have been used to study the effect of substitution on physical and thermal properties. Synthesis of rigid mesogenic diol monomer using p-hydroxy benzoic acid and hydroquinone is reported, which is a facile route. Hydrolysis of diacetate derivatives of rigid mesogenic diols is performed in good yields, even though two types of ester groups present in the same moiety, aromatic and aliphatic. The experimental results reveal that hydroquinone based rigid triad mesogenic diol have high thermal stability and degree of crystallinity as compared to methyl-and chloro-substituted rigid triad mesogenic diols.

}, keywords = {degree of crystallinity, ester hydrolysis, Mesogenic diols, spectral properties, Thermal properties}, issn = {0376-4699}, author = {Mulani, Khudbudin Baban and Ganjave, Nitin V. and Chavan, Nayaku} } @article { ISI:000332351800006, title = {Synthesis and in situ observation of 3D super lattices of gold nanoparticles using oil-in-water emulsion}, journal = {Journal of Colloid and Interface Science}, volume = {420}, year = {2014}, month = {APR}, pages = {41-49}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

In this work oil-in-water emulsion has been successfully used as a confined environment to grow 3D superlattices of gold nanoparticles. The superlattices were grown from 5 nm uniform gold nanoparticles using slow destabilization method. The confined environment was created by forming a stable emulsion where the gold colloid suspended in toluene was used as oil phase. Superlattices were also formed in bulk solution using the same slow destabilization method. A comparative study reveals that compact superlattices form more readily inside the emulsion drops as compared to bulk precipitation. The unstable colloid (in bulk or as emulsion) was aged for various periods at 5 degrees C to form more compact superlattices. The best superlattices with sharp corners are observed when the superlattices are formed inside the emulsion and aged for a month. Two key parameters, the incubation temperature and anti-solvent concentration, are optimized to obtain larger superlattices with sharp features. A new method is also demonstrated for in situ observation of superlattice formation using an optical microscope. 2014 Elsevier Inc. All rights reserved.

}, keywords = {3D nanocrystal superlattices, In situ observation of superlattice formation, Monodisperse gold nanoparticles, Nanocrystal superlattices}, issn = {0021-9797}, doi = {10.1016/j.jcis.2013.12.060}, author = {Dutta, Ankur and Chakraborty, Jayanta and Bhagavatula L. V. Prasad and Sahu, Puspanjali} } @article { ISI:000340149800003, title = {Synthesis, characterization, and crystal structure determination of palladacycles of para-substituted 2-thiobenzylazobenzenes}, journal = {Journal of Coordination Chemistry}, volume = {67}, number = {10}, year = {2014}, month = {JUN}, pages = {1702-1714}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Bichelated neutral palladacycles (1-3), [Pd(L)Cl], were synthesized from reaction of the new potential tridentate (C,N,S) ligands, 2-thiobenzylazobenzene (L-1), 4{\textquoteright}-methyl-2-thiobenzylazobenzene (L-2), and 4{\textquoteright}-chloro-2-thiobenzylazobenzene (L-3) with sodium tetrachloropalladate(II), Na-2[PdCl4], in ethanol. The compounds were characterized by elemental analysis, FT-IR, H-1 NMR, UV-visible, and thermogravimetric analysis. The crystal structures of L-2 and 1-3 were determined by single-crystal X-ray diffraction. In 1-3, the geometry around palladium remains almost square planar, coordinated to carbon, nitrogen, and sulfur of the ligand forming a bichelated cyclopalladate complex. The C-H center dot center dot center dot Cl type intermolecular hydrogen bonds, weak pi center dot center dot center dot pi, C-H center dot center dot center dot pi, and van der Waals interactions are believed to be the stabilizing forces for the crystal packing of these palladacycles.

}, keywords = {2-Thiobenzylazobenzene, CNS-donor ligand, crystal structure, Palladacycles, Thermogravimetric analysis}, issn = {0095-8972}, doi = {10.1080/00958972.2014.922683}, author = {Bhattacharjee, Tirtha and Kalita, Mukul and Chakravarty, Debamitra K. and Barman, Pranjit and Puranik, Vedavati G.} } @article { ISI:000343671700036, title = {Synthesis, characterization and in vitro study of biocompatible cinnamaldehyde functionalized magnetite nanoparticles (CPGF Nps) for hyperthermia and drug delivery applications in breast cancer}, journal = {Plos One}, volume = {9}, number = {9}, year = {2014}, month = {SEP}, pages = {e107315}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Cinnamaldehyde, the bioactive component of the spice cinnamon, and its derivatives have been shown to possess anticancer activity against various cancer cell lines. However, its hydrophobic nature invites attention for efficient drug delivery systems that would enhance the bioavailability of cinnamaldehyde without affecting its bioactivity. Here, we report the synthesis of stable aqueous suspension of cinnamaldehyde tagged Fe3O4 nanoparticles capped with glycine and pluronic polymer (CPGF NPs) for their potential application in drug delivery and hyperthermia in breast cancer. The monodispersed superparamagnetic NPs had an average particulate size of similar to 20 nm. TGA data revealed the drug payload of similar to 18\%. Compared to the free cinnamaldehyde, CPGF NPs reduced the viability of breast cancer cell lines, MCF7 and MDAMB231, at lower doses of cinnamaldehyde suggesting its increased bioavailability and in turn its therapeutic efficacy in the cells. Interestingly, the NPs were non-toxic to the non-cancerous HEK293 and MCF10A cell lines compared to the free cinnamaldehyde. The novelty of CPGF nanoparticulate system was that it could induce cytotoxicity in both ER/PRpositive/Her2 negative (MCF7) and ER/PRnegative/Her2 negative (MDAMB231) breast cancer cells, the latter being insensitive to most of the chemotherapeutic drugs. The NPs decreased the growth of the breast cancer cells in a dose-dependent manner and altered their migration through reduction in MMP-2 expression. CPGF NPs also decreased the expression of VEGF, an important oncomarker of tumor angiogenesis. They induced apoptosis in breast cancer cells through loss of mitochondrial membrane potential and activation of caspase-3. Interestingly, upon exposure to the radiofrequency waves, the NPs heated up to 41.6 degrees C within 1 min, suggesting their promise as a magnetic hyperthermia agent. All these findings indicate that CPGF NPs prove to be potential nano-chemotherapeutic agents in breast cancer.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0107315}, author = {Wani, Kirtee D. and Kadu, Brijesh S. and Mansara, Prakash and Gupta, Preeti and Deore, Avinash V. and Chikate, Rajeev C. and Poddar, Pankaj and Dhole, Sanjay D. and Kaul-Ghanekar, Ruchika} } @article { ISI:000338348000023, title = {Synthesis, characterization and photocatalytic behavior of TiO2-SiO2 mesoporous composites in hydrogen generation from water splitting}, journal = {Journal of Materials Science}, volume = {49}, number = {18}, year = {2014}, month = {SEP}, pages = {6383-6391}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

TiO2-SiO2 mesoporous composite photocatalysts with different proportions (in wt\%) of TiO2 and SiO2 (TiO2-SiO2 = 20:80, 40:60, 60:40, 80:20 and 100:0) were prepared by loading TiO2 on as-synthesized Si-MCM-41 using sol-gel method. The physicochemical properties of composites were investigated by powder X-ray diffraction, N-2 adsorption-desorption measurements, transmission electron microscopy and UV-Vis diffuse reflectance spectroscopy. It is revealed that the titanium species are dispersed as TiO2 having interaction with the surface of the support. Even at high TiO2 loading, the mesostructural feature of MCM-41 was found to be intact without pore blockages. The change in morphology of TiO2 particle was observed with increase in TiO2 loading which may be due to different environment for the growth of TiO2. The photocatalytic evaluation of composites was carried out in production of hydrogen by water splitting. Among the prepared samples, mesoporous composite containing 60 \% TiO2 (MTi60) has shown the best results (0.08805 mmol of H-2/h/g of TiO2) compared to other composite photocatalysts. The catalytic performance of this sample was further enhanced (similar to 8 times) after loading 1 \% Pt in water splitting (0.70161 mmol of H-2/h/g of TiO2). 1 \% Pt loaded on pure TiO2 (MTi100) showed hydrogen evolution of the magnitude 0.26 mmol of H-2/h/g of TiO2. TiO2-SiO2 mesoporous composite photocatalyst showed much higher activity (similar to 1.9 times) than amorphous silica-embedded titania catalyst having same composition.

}, issn = {0022-2461}, doi = {10.1007/s10853-014-8365-2}, author = {Niphadkar, P. S. and Chitale, S. K. and Sonar, S. K. and Deshpande, Suvarna S. and Joshi, P. N. and Awate, S. V.} } @article { ISI:000333686000001, title = {Synthesis of ciprofloxacin-conjugated poly(L-lactic acid) polymer for nanofiber fabrication and antibacterial evaluation}, journal = {International Journal of Nanomedicine}, volume = {9}, year = {2014}, month = {MAR}, pages = {1463-1477}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Ciprofloxacin was conjugated with polylactide (PLA) via the secondary amine group of the piperazine ring using PLA and 7-(4-(2-Chloroacetyl) piperazin-1-yl)-1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxoquinoline-3-carboxylic acid. Zinc prolinate, a biocompatible catalyst was synthesized, characterized, and used in ring opening polymerization of L-lactide. Five different kinds of OH-terminated poly(L-lactide) (two-, three-, four-, six-arm, star-shaped) homopolymers were synthesized by ring opening polymerization of L-lactide in the presence of dodecanol, glycerol, pentaerythritol, dipentaerythritol as initiator and zinc prolinate as a catalyst. The structures of the polymers and conjugates were thoroughly characterized by means of gel permeation chromatography, matrix-assisted laser desorption/ionization-time of flight mass spectrometry, and nuclear magnetic resonance spectroscopy. PLA (molecular weight = 100,000) and ciprofloxacin conjugated PLA were used for fabrication of nonwoven nanofiber mat (diameter ranges; 150-400 nm) having pore size (62-102 nm) using electrospinning. The microbiological assessment shows that the release of ciprofloxacin possesses antimicrobial activity. The drug-release behavior of the mat was studied to reveal potential application as a drug delivery system. The result shows that the ciprofloxacin release rates of the PLA conjugate nonwoven nanofiber mat could be controlled by the drug loading content and the release medium. The development of a biodegradable ciprofloxacin system, based on nonwoven nanofiber mat, should be of great interest in drug delivery systems.

}, keywords = {antibacterial activity, ciprofloxacin conjugated polylactides, CP-PLA, drug release, electrospinning, MDR, nonwoven nanofibers, zinc prolinate}, issn = {1178-2013}, doi = {10.2147/IJN.S54971}, author = {Parwe, Sharad P. and Chaudhari, Priti N. and Mohite, Kavita K. and Selukar, Balaji S. and Nande, Smita S. and Garnaik, Baijayantimala} } @article { ISI:000331483800028, title = {Synthesis, structure, spectral, electrochemical and sensing properties of 3-amino boron-dipyrromethene and its derivatives}, journal = {Dyes and Pigments}, volume = {102}, year = {2014}, month = {MAR}, pages = {218-227}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

We report the synthesis of 3-amino boron-dipyrromethene (3-amino BODIPY) by treating 3-bromo boron-dipyrromethene (3-bromo BODIPY) initially with sodium azide in acetonitrile followed by tri-phenylphosphine(PPh3)/H2O in tetrahydrofuran in three steps under mild reaction conditions. In this reaction, 3-azido BODIPY which formed in the first step was not isolated but the 3-iminophosphorane BODIPY which formed in the second step was isolated and characterized crystallographically. The 3-amino BODIPY was characterized by various spectroscopic and X-ray analytical techniques. To test the reactivity of amine functionality on BODIPY core, we prepared 1-(meso-anisyl BODIPY)-3-phenyl urea/thiourea derivatives under simple reaction conditions. Our studies indicated that 1-(meso-anisyl BODIPY)-3-pheny thiourea can act as specific chemodosimetric sensor for Hg2+ ion and 1-(meso-anisyl BODIPY)-3-phenyl urea as colorimetric and ratiometric sensor for F- ion. (C) 2013 Elsevier Ltd. All rights reserved.

}, keywords = {3-Amino boron dipyrromethene, Chemodosimeter, F sensor, Fluorescent probes, Iminophosphorane BODIPY, Mercury(II) sensor}, issn = {0143-7208}, doi = {10.1016/j.dyepig.2013.10.038}, author = {Ganapathi, Emandi and Madhu, Sheri and Chatterjee, Tamal and Gonnade, Rajesh G. and Ravikanth, Mangalampalli} } @article { ISI:000333551200039, title = {Systematic evaluation of tetra-n-butyl ammonium bromide (TBAB) for carbon dioxide capture employing the clathrate process}, journal = {Industrial \& Engineering Chemistry Research}, volume = {53}, number = {12}, year = {2014}, month = {MAR}, pages = {4878-4887}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hydrate based gas separation (HBGS) process for the precombustion capture of CO2 from a fuel gas mixture is a novel method being investigated among the carbon capture and sequestration techniques to reduce CO2 emissions. The efficiency of the HGBS process can be improved by using promoters that reduce the formation pressure of mixed gas hydrates. In this study the effect of tetra-n-butyl ammonium bromide (TBAB) was systematically investigated at a constant temperature of 279.2 K and pressure of 6.0 MPa for different TBAB concentrations of 0.3, 1.0, 1.5, 2.0, and 3.0 mol \%, respectively. The 0.3 mol \% solutions had a relatively longer average induction time of 20.1 min but exhibited the highest total normalized gas uptake of 0.0104 (+/- 0.0004) mol of gas/mol of water and highest separation factor of 41.51 (+/- 6.391). On the other hand, the 1.0 mol \% solution had very short average induction time (\<0.5 min) and it had the highest hydrate growth rate of 60.8 (+/- 9.89) mol of gas. min(-1).m(-3), with the separation factor of 13.78 (+/- 3.30). Gas solubility measurements and microscopic images of the hydrate formation were also presented to provide greater insights into the effect of TBAB concentration on the gas uptake.

}, issn = {0888-5885}, doi = {10.1021/ie4043714}, author = {Babu, Ponnivalavan and Chin, Weng Inn and Kumar, Rajnish and Linga, Praveen} } @article { ISI:000345975300012, title = {Titania nanoparticles stabilized HPA in SBA-15 for the intermolecular hydroamination of activated olefins}, journal = {ChemCatChem}, volume = {6}, number = {12}, year = {2014}, month = {DEC}, pages = {3347-3354}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A liquid phase hydroamination (HA) of alpha,beta-ethylenic compounds with amines was investigated with TiO2 nanoparticles stabilized 12-tungstophosphoric acid (TPA) in SBA-15. The catalysts were prepared by wet impregnation of TPA/TiO2 nanoparticles into the SBA-15 and calcined at different temperatures. The characterization results reveal that the textural properties and the acidity of the prepared catalysts can be finely controlled with the simple adjustment of the calcination temperature and the structure of the support, decorated with the TiO2 and TPA nanoparticles, was intact even after the modification. The prepared catalysts were investigated for HA of ethyl acrylate with different aromatic and aliphatic amines over a wide range of reaction conditions to optimize the yield and the selectivity of product. It was found that this process is 100\% atom efficient and the catalytic performance depended significantly on the loading of TPA over the catalyst and the calcination temperature. Under optimized reaction conditions, the best catalyst, 15 wt\% TPA/22.4 wt\% TiO2/SBA-15 calcined at 1123 K, offered the highest conversion of p-ethylaniline (70\%) with 100\% chemo-selectivity to the anti-Markovnikov product, i.e., the mono-addition product. The reaction was heterogeneously catalyzed and no contribution from leached TPA into the reaction was observed.

}, keywords = {heteropoly acids, hydroamination, mesoporous materials, nanocatalysts}, issn = {1867-3880}, doi = {10.1002/cctc.201402449}, author = {Sawant-Dhuri, Dhanashri and Balasubramanian, Veerappan V. and Ariga, Katsuhiko and Park, Dae-Hwan and Choy, Jin-Ho and Cha, Wang Soo and Al-deyab, Salem S. and Halligudi, Shivappa B. and Vinu, Ajayan} } @article { ISI:000341938100024, title = {Total syntheses of D-allo-1-deoxynojirimycin and L-talo-1-deoxynojirimycin via reductive cyclization}, journal = {RSC Advances}, volume = {4}, number = {77}, year = {2014}, month = {AUG}, pages = {40852-40858}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Synthesis of a polyhydroxypiperidine framework for L-talo-1-deoxynojirimycin and D-allo-1-deoxynojirimycin was achieved from L-tartaric acid by employing flash dihydroxylation and reductive lactamisation as the key steps.

}, issn = {2046-2069}, doi = {10.1039/c4ra06884j}, author = {Chavan, Subhash P. and Dumare, Nilesh B. and Pawar, Kailash P.} } @article { ISI:000341552000004, title = {Unusual, selective, reductive, deoxygenation of cyclopentenone alcohols}, journal = {Tetrahedron Letters}, volume = {55}, number = {38}, year = {2014}, month = {SEP}, pages = {5241-5243}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A selective, reductive, deoxygenation of 2-aryl-4-hydroxycyclopent-2-en-1-ones to afford 2-aryl-cyclopent-2-en-1-ones was achieved by NaBH4-CeCl3 in methanol. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Cyclopentenone alcohol, Enone, Luche reduction, Reductive deoxygenation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.07.122}, author = {Bavikar, Suhas R. and Lasonkar, Trupti P. and Chavan, Subhash P. and Borate, Hanumant B.} } @article { ISI:000362948200004, title = {Ambient temperature photocopolymerization of tetrahydrofurfuryl methacrylate and isobornyl methacrylate: reactivity ratios and thermal studies}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {52}, number = {12}, year = {2015}, month = {DEC}, pages = {982-991}, publisher = {TAYLOR \& FRANCIS INC}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

Photocopolymerization of heterocyclic monomer namely, tetrahydrofurfuryl methacrylate with bulky bicyclic monomer, isobornyl methacrylate with different feed ratios was carried out in bulk with low concentration of an -hydroxyl ketone based photoinitiator. The ambient temperature photocopolymerization was carried out by using a UV-Visible lamp with fixed low intensity of 0.4mW cm(-2) for a period of 6min. The residual monomer remained in the polymerization process were determined by using gas chromatography. The reactivity ratio values for the two monomers were calculated from the copolymer composition data by using Fineman-Ross, Kelen-Tudos, Extended Kelen-Tudos and Mao-Huglin methods. Individually, as well as the average of all the methods revealed that the monomer reactivity ratios of tetrahydrofurfuryl methacrylate were higher than isobornyl methacrylate. The dyad sequence distribution and dyad sequence lengths were calculated using the Igarashi and Pyun method and the sequence length distribution for tetrahydrofurfuryl methacrylate was observed to be higher with an increase in its feed content. This supports the reactivity ratio studies that a higher monomer reactivity ratio value for tetrahydrofurfuryl methacrylate was observed as compared to its comonomer. The thermal studies showed that the glass transition temperatures of the copolymers increased with an increase in isobornyl methacrylate content.

}, keywords = {Copolymer, methacrylates, micro structure, photocopolymerization, reactivity ratios, thermal studies}, issn = {1060-1325}, doi = {10.1080/10601325.2015.1095600}, author = {Rajdeo, K. S. and Ponrathnam, S. and Pardeshi, S. and Chavan, Nayaku and Bhongale, Sunil Sitaram and Harikrishna, Reghunathan} } @article {42987, title = {Antimycobacterium activity of coumarins from fruit pulp of aegle marmelos (L.) correa}, journal = {International Journal of Basic and Applied Chemical Sciences}, volume = {5}, year = {2015}, month = {JUL}, pages = {39-44}, abstract = {

Phytochemical investigation of n-butanol fraction of acetone extract of Aegle marmelos fruit has afforded four compounds coumarins marmelosin (1), marmin (2) and xanthotoxol (3) and flavonoid kaempferol 3- O-rhamnoside, afzelin (4). All the isolated compounds were evaluated for their antimycobacterium activity against Mycobacterium tuberculosis H37Ra and Mycobacterium bovis. Compounds 1 and 2 exhibited antimycobacterium activity against M. tuberculosis H37Ra with an IC50 12.46 {\textmu}g/mL and 4.31 {\textmu}g/mL respectively whereas, at 100 {\textmu}g/mL, 62.5\% and 82.4\% growth inhibition of M. bovis was observed respectively. Compounds 1 and 2 were also evaluated against two gram positive bacteria Staphylococcus aureus, Bacillus subtilis and one gram negative bacteria Escherichia coli. Compound 1 at 100 {\textmu}g/mL, showed growth inhibition, 64.6\% and 74.9\% of E. coli and B. subtilis respectively.

}, author = {Chinchansure, Ashish A. and Shamnani, Neelam and Arkile, Manisha A. and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000363168200012, title = {Assessing the effect of different shapes of glyco-gold nanoparticles on bacterial adhesion and infections}, journal = {Chemical Communications}, volume = {51}, number = {86}, year = {2015}, month = {AUG}, pages = {15669-15672}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Achieving selective and sensitive carbohydrate-protein interactions (CPIs) using nanotechnology is an intriguing area of research. Here we demonstrate that the different shapes of gold nanoparticles (AuNPs) functionalized with monosaccharides tune the bacterial aggregations. The mechanism of aggregation revealed that the large number of surface interactions of rod shaped mannose-AuNPs with E. coli ORN 178 compared with spherical and star-shaped AuNPs exhibited higher avidity and sensitivity. Moreover, such sensitive binding can be used for effective inhibition of bacterial infection of cells.

}, issn = {1359-7345}, doi = {10.1039/c5cc05238f}, author = {Chaudhary, Preeti Madhukar and Sangabathuni, Sivakoti and Murthy, Raghavendra Vasudeva and Paul, Ajay and Thulasiram, Hirekodathakallu V. and Kikkeri, Raghavendra} } @article { ISI:000362611300009, title = {Atomic-resolution structures of the APC/C subunits Apc4 and the Apc5 N-terminal domain}, journal = {Journal of Molecular Biology}, volume = {427}, number = {20}, year = {2015}, month = {OCT}, pages = {3300-3315}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Many essential biological processes are mediated by complex molecular machines comprising multiple subunits. Knowledge on the architecture of individual subunits and their positions within the overall multimeric complex is key to understanding the molecular mechanisms of macromolecular assemblies. The anaphase-promoting complex/cyclosome (APC/C) is a large multisubunit complex that regulates cell cycle progression by ubiquitinating cell cycle proteins for proteolysis by the proteasome. The holo-complex is composed of 15 different proteins that assemble to generate a complex of 20 subunits. Here, we describe the crystal structures of Apc4 and the N-terminal domain of Apc5 (Apc5(N)). Apc4 comprises a WD40 domain split by a long alpha-helical domain, whereas Apc5(N) has an alpha-helical fold. In a separate study, we had fitted these atomic models to a 3.6-angstrom-resolution cryo-electron microscopy map of the APC/C. We describe how, in the context of the APC/C, regions of Apc4 disordered in the crystal assume order through contacts to Apc5, whereas Apc5(N) shows small conformational changes relative to its crystal structure. We discuss the complementary approaches of high-resolution electron microscopy and protein crystallography to the structure determination of subunits of multimeric complexes. (c) 2015 MRC Laboratory of Molecular Biology. Published by Elsevier Ltd.

}, keywords = {anaphase-promoting complex, cell cycle, multisubunit structure, protein crystallography, ubiquitin}, issn = {0022-2836}, doi = {10.1016/j.jmb.2015.08.023}, author = {Cronin, Nora B. and Yang, Jing and Zhang, Ziguo and Kulkarni, Kiran and Chang, Leifu and Yamano, Hiroyuki and Barford, David} } @article { ISI:000351792800014, title = {Bioactive polymersomes self-assembled from amphiphilic.PPO-glycopolypeptides: synthesis, characterization, and dual-dye encapsulation}, journal = {Langmuir}, volume = {31}, number = {11}, year = {2015}, month = {APR}, pages = {3402-3412}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Glycopolypeptide-based polymersomes have promising applications as vehicles for targeted drug delivery because they are capable of encapsulating different pharmaceuticals of diverse polarity as well as interacting with specific cell surfaces due to their hollow structural morphology and bioactive surfaces. We have synthesized glycopolypeptide-b-poly(propylene oxide) by ROP of glyco-N-carboxyanhydride (NCA) using the hydrophobic amine-terminated poly(propylene oxide) (PPO) as the initiator. This block copolymer is composed of an FDA-approved PPO hydrophobic block in conjugation with hydrophilic glycopolypeptides which are expected to be biocompatible. We demonstrate the formation of glycopolypeptide-based polymersomes from the self-assembly of glycopolypeptide-b-poly(propylene oxide) in which the presence of an ordered helical glycopolypeptide segment is required for their self-assembly into spherical nanoscale (similar to 50 nm) polymersomes. The polymersomes were characterized in detail using a variety of techniques such as TEM, AFM, cryo-SEM, and light-scattering measurements. As a model for drugs, both hydrophobic (RBOE) and hydrophilic (calcein) dyes have been incorporated within the polymersomes from solution. To substantiate the simultaneous entrapment of the two dyes, spectrally resolved fluorescence microscopy was performed on the glycopeptide polymersomes cast on a glass substrate. We show that it is possible to visualize individual nanoscale polymersomes and effectively probe the dyes colocalization and energy-transfer behaviors therein as well as investigate the variation in dual-dye encapsulation over a large number of single polymersomes. Finally, we show that the galactose moieties present on the surface can specifically recognize lectin RCA(120), which reveals that the polymersomes surface is indeed biologically active.

}, issn = {0743-7463}, doi = {10.1021/la503993e}, author = {Das, Soumen and Sharma, Dharmendar Kumar and Chakrabarty, Suman and Chowdhury, Arindam and Sen Gupta, Sayam} } @article { ISI:000359173900007, title = {Biochemical, structural and functional diversity between two digestive alpha-amylases from helicoverpa armigera}, journal = {Biochimica Et Biophysica Acta-General Subjects}, volume = {1850}, number = {9}, year = {2015}, month = {SEP}, pages = {1719-1728}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Background: Helicoverpa armigera (Lepidoptera) feeds on various plants using diverse digestive enzymes as one of the survival tool-kit. The aim of the present study was to understand biochemical properties of recombinant alpha-amylases of H. armigera viz., HaAmy1 and HaAmy2. Methods: The open reading frames of HaAmy1 and HaAmy2 were cloned in Pichia pastoris and expressed heterologously. Purified recombinant enzymes were characterized for their biochemical and biophysical attributes using established methods. Results: Sequence alignment and homology modeling showed that HaAmy1 and HaAmy2 were conserved in their amino acid sequences and structures. HaAmy1 and HaAmy2 showed optimum activity at 60 degrees C; however, they differed in their optimum pH. Furthermore, HaAmy2 showed higher affinity for starch and amylopectin whereas HaAmy1 had higher catalytic efficiency. HaAmy1 and HaAmy2 were inhibited to the same magnitude by a synthetic amylase inhibitor (acarbose) while wheat amylase inhibitor showed about 2-fold higher inhibition of HaAmy1 than HaAmy2 at pH 7 while 6-fold difference at pH 11. Interactions of HaAmy1 and HaAmy2 with wheat amylase inhibitor revealed 2:1 stoichiometric ratio and much more complex interaction with HaAmy1. Conclusions: The diversity of amylases in perspective of their biochemical and biophysical properties, and their differential interactions with amylase inhibitors signify the potential role of these enzymes in adaptation of H. armigera on diverse plant diets. General significance: Characterization of digestive enzymes of H. armigera provides the molecular basis for the polyphagous nature and thus could assist in designing future strategies for the insect control. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {alpha-amylases, Amylase inhibitors, Digestive enzymes, Enzyme activity, Helicoverpa armigera}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2015.04.008}, author = {Bhide, Amey J. and Channale, Sonal M. and Patil, Sucheta S. and Gupta, Vidya S. and Ramasamy, Sureshkumar and Giri, Ashok P.} } @article { ISI:000362920700039, title = {Bioinspired catecholic flame retardant nanocoating for flexible polyurethane foams}, journal = {Chemistry of Materials}, volume = {27}, number = {19}, year = {2015}, month = {OCT}, pages = {6784-6790}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient, environmentally friendly, and water-applied flame retardant surface nanocoating based on polydopamine (PDA) was developed for foamed materials such as polyurethane (PU). The PDA nanocoating, deposited by simple dip-coating in an aqueous dopamine solution, consists of a planar sublayer and a secondary granular layer structure that evolve together, eventually turning into a dense, uniform, and conformal layer on all foam surfaces. In contrast to flexible PU foams that are known to be highly flammable without flame retardant additives, micro combustion calorimetry (MCC) and thermogravimetric analysis (TGA) confirm that the neat PDA is relatively inflammable with a strong tendency to form carbonaceous, porous char that is highly advantageous for flame retardancy. By depositing nano coatings of PDA onto flexible PU foams, the flammability of the PU foam was significantly reduced with increasing coating thickness. For the thickest coating (3 days of PDA deposition), the foam quickly self-extinguished and its original shape was completely preserved after exposure to a flame in a torch burn test. In addition to the char forming ability of PDA, it is hypothesized that its catechol units likely scavenge nearby radicals that typically evolve additional fuel for the fire as they attack surrounding materials. This multiple flame retardancy action of PDA (i.e., char formation + radical scavenging) enables flame retardant foams with a peak heat release rate (P-HRR) that is significantly reduced (up to 67\%) relative to control foams, representing much better performance than many conventional additives reported in the literature at comparable or higher loadings.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.5b03013}, author = {Cho, Joon Hee and Vasagar, Vivek and Shanmuganathan, Kadhiravan and Jones, Amanda R. and Nazarenko, Sergei and Ellison, Christopher J.} } @article { ISI:000350841100024, title = {Biophysical characterization and molecular docking studies of imidazolium based polyelectrolytes-DNA complexes: role of hydrophobicity}, journal = {Biomacromolecules}, volume = {16}, number = {3}, year = {2015}, month = {MAR}, pages = {894-903}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Nonviral gene delivery vectors are acquiring greater attention in the field of gene therapy by replacing the biological viral vectors. DNA-cationic polymer complexes are one of the most promising systems to find application in gene therapy. Hence, a complete insight of their biophysical characterization and binding energy profile is important in understanding the mechanism involved in nonviral gene therapy. In this investigation, the interaction between calf thymus DNA (ctDNA) and imidazolium-based poly(ionic liquids) (PILs) also known as polyelectrolytes with three different alkyl side chains (ethyl, butyl, and hexyl) in physiological conditions using various spectroscopic experiments with constant DNA concentration and varying polyelectrolyte concentrations is reported. UV-visible absorption, fluorescence quenching studies, gel electrophoresis, circular dichroism (CD), and Fourier transform infrared spectroscopy (FTIR) have confirmed the binding of polyelectrolytes with DNA. UV-vis absorption measurements and fluorescence quenching revealed that the binding between DNA and the polyelectrolyte is dominated by electrostatic interactions. Additionally, CD and FTIR results indicated that the DNA retained its B-form with minor perturbation in the phosphate backbone without significant change in the conformation of its base pairs. Preference for alkyl side chains (KPIL-Ethyl Br \< KPIL-Butyl Br \< KPIL-Hexyl Br) toward efficient binding between the polyelectrolyte and DNA was inferred from the binding and quenching constants calculated from the absorption and emission spectra, respectively. Further, in silico molecular docking studies not only validated the observed binding trend but also provided insight into the binding mode of the polyelectrolyte-DNA complex.

}, issn = {1525-7797}, doi = {10.1021/bm5018029}, author = {Manojkumar, Kasina and Charan, K. T. Prabhu and Sivaramakrishna, Akella and Jha, Prakash C. and Khedkar, Vijay M. and Siva, Ramamoorthy and Jayaraman, Gurunathan and Vijayakrishna, Kari} } @article { ISI:000354208900004, title = {Calcium phosphate nanocapsule crowned multiwalled carbon nanotubes for pH triggered intracellular anticancer drug release}, journal = {Journal of Materials Chemistry B}, volume = {3}, number = {19}, year = {2015}, month = {APR}, pages = {3931-3939}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report calcium phosphate (CaP) nanocapsule crowned multi-walled carbon nanotubes (CNT-GSH-G4-CaP) as a novel platform for intracellular delivery of an anticancer drug. As a proof-of-concept, CNT-GSH-G4-CaP demonstrates release of anticancer drug doxorubicin hydrochloride (DOX) within intracellular lysosomes from the interior cavity of CNT upon pH triggered CaP dissolution. Importantly, we found that the CNT with a CaP nanolid can efficiently prevent untimely drug release at physiological pH but promotes DOX release at increased acidic milieu as observed in subcellular compartments such as lysosomes (similar to 5.0). This {\textquoteleft}{\textquoteleft}zero premature release{\textquoteright}{\textquoteright} characteristic is of clinical significance in delivering cytotoxic drugs, by reducing systemic toxicity and thus beneficial for the effective anticancer treatment. We envision that this pH triggered CaP crowned CNT nanosystem would lead to a new generation of self-regulated platforms for intracellular delivery of a variety of anticancer drugs.

}, issn = {2050-750X}, doi = {10.1039/c5tb00534e}, author = {Banerjee, Shashwat S. and Todkar, Kiran J. and Khutale, Ganesh V. and Chate, Govind P. and Biradar, Ankush V. and Gawande, Manoj B. and Zboril, Radek and Khandare, Jayant J.} } @article { ISI:000348833400001, title = {Characterization of 10-hydroxygeraniol dehydrogenase from catharanthus roseus reveals cascaded enzymatic activity in iridoid biosynthesis}, journal = {Scientific Reports}, volume = {5}, year = {2015}, month = {FEB}, pages = {Article Number: 8258}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

Catharanthus roseus [L.] is a major source of the monoterpene indole alkaloids (MIAs), which are of significant interest due to their therapeutic value. These molecules are formed through an intermediate, cis-trans-nepetalactol, a cyclized product of 10-oxogeranial. One of the key enzymes involved in the biosynthesis of MIAs is an NAD(P)(+) dependent oxidoreductase system, 10-hydroxygeraniol dehydrogenase (Cr10HGO), which catalyses the formation of 10-oxogeranial from 10-hydroxygeraniol via 10-oxogeraniol or 10-hydroxygeranial. This work describes the cloning and functional characterization of Cr10HGO from C. roseus and its role in the iridoid biosynthesis. Substrate specificity studies indicated that, Cr10HGO has good activity on substrates such as 10-hydroxygeraniol, 10-oxogeraniol or 10-hydroxygeranial over monohydroxy linear terpene derivatives. Further it was observed that incubation of 10-hydroxygeraniol with Cr10HGO and iridoid synthase (CrIDS) in the presence of NADP(+) yielded a major metabolite, which was characterized as (1R, 4aS, 7S, 7aR)-nepetalactol by comparing its retention time, mass fragmentation pattern, and co-injection studies with that of the synthesized compound. These results indicate that there is concerted activity of Cr10HGO with iridoid synthase in the formation of (1R, 4aS, 7S, 7aR)-nepetalactol, an important intermediate in iridoid biosynthesis.

}, issn = {2045-2322}, doi = {10.1038/srep08258}, author = {Krithika, Ramakrishnan and Srivastava, Prabhakar Lal and Rani, Bajaj and Kolet, Swati P. and Chopade, Manojkumar and Soniya, Mantri and Thulasiram, Hirekodathakallu V.} } @article { ISI:000360705500008, title = {Chemical and biological metal nanoparticles as antimycobacterial agents: a comparative study}, journal = {International Journal of Antimicrobial Agents}, volume = {46}, number = {2}, year = {2015}, month = {AUG}, pages = {183-188}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Resistance among mycobacteria leading to multidrug-resistant and extensively drug-resistant tuberculosis is a major threat. However, nanotechnology has provided new insights in drug delivery and medicine development. This is the first comparative report to determine the activity of chemically and biologically synthesised silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) against mycobacteria. Screening data revealed the high mycobactericidal efficiency of AgNPs, with minimum inhibitory concentrations (MICs) of \<3 mu g/mL, whereas no such activity was exhibited by AuNPs at concentrations up to 100 mu g/mL. Moreover, in vitro and ex vivo THP-1 infection model assays showed greater efficacy of chemical AgNPs compared with biogenic AgNPs to inhibit active and dormant stage mycobacterial growth. Up to 40\% cytotoxicity against human cell lines was observed at a AgNP concentration of 10 x MIC (30 mu g/mL) after 48 h. AgNPs were shown to have more specificity towards mycobacteria than towards other Gram-negative and Gram-positive pathogenic bacteria. The selectivity index was found to be in the range of 11-23, indicating the potential of these nanoparticles for use in developing new therapeutics for tuberculosis. (C) 2015 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

}, keywords = {Antibiotic resistance, Antimycobacterial agent, Cytotoxicity, Mycobacteria, Nanoparticles, tuberculosis}, issn = {0924-8579}, doi = {10.1016/j.ijantimicag.2015.03.014}, author = {Singh, Richa and Nawale, Laxman U. and Arkile, Manisha A. and Shedbalkar, Utkarsha U. and Wadhwani, Sweety A. and Sarkar, Dhiman and Chopade, Balu Ananda} } @article {45947, title = {Chirality induction and chiron approaches to enantioselective total synthesis of alpha-lipoic acid}, journal = {Tetrahedron}, volume = {71}, year = {2015}, month = {JUN }, pages = {4213-4218}, type = {Article}, abstract = {

An efficient, short and convenient asymmetric synthesis of (R)-(+)-lipoic acid in seven steps from chiral hydroxy aldehyde with 32.5\% overall yield is described. Synthesis of S and R enantiomers of a-lipoic acid from cis-1,4-butene diol derived chiral lactone is reported with 34 \% overall yield. The present synthesis involves use of simple reaction conditions making it a convenient synthesis. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Chiral pool, Chirality induction, enantioselective, Lipoic acid, sharpless asymmetric dihydroxylation}, issn = {0040-4020}, doi = {10.1016/j.tet.2015.04.090}, author = {Chavan, Subhash P. and Pawar, Kailash P. and Praveen, Ch and Patil, Niteen B.} } @article { ISI:000358250800001, title = {Chromerid genomes reveal the evolutionary path from photosynthetic algae to obligate intracellular parasites}, journal = {Elife}, volume = {4}, year = {2015}, month = {JUL}, pages = {Article Number: e06974}, publisher = {ELIFE SCIENCES PUBLICATIONS LTD}, address = {SHERATON HOUSE, CASTLE PARK, CAMBRIDGE, CB3 0AX, ENGLAND}, abstract = {

The eukaryotic phylum Apicomplexa encompasses thousands of obligate intracellular parasites of humans and animals with immense socio-economic and health impacts. We sequenced nuclear genomes of Chromera velia and Vitrella brassicaformis, free-living non-parasitic photosynthetic algae closely related to apicomplexans. Proteins from key metabolic pathways and from the endomembrane trafficking systems associated with a free-living lifestyle have been progressively and non-randomly lost during adaptation to parasitism. The free-living ancestor contained a broad repertoire of genes many of which were repurposed for parasitic processes, such as extracellular proteins, components of a motility apparatus, and DNA-and RNA-binding protein families. Based on transcriptome analyses across 36 environmental conditions, Chromera orthologs of apicomplexan invasion-related motility genes were co-regulated with genes encoding the flagellar apparatus, supporting the functional contribution of flagella to the evolution of invasion machinery. This study provides insights into how obligate parasites with diverse life strategies arose from a once free-living phototrophic marine alga.

}, issn = {2050-084X}, doi = {10.7554/eLife.06974}, author = {Woo, Yong H. and Ansari, Hifzur and Otto, Thomas D. and Klinger, Christen M. and Kolisko, Martin and Michalek, Jan and Saxena, Alka and Shanmugam, Dhanasekaran and Tayyrov, Annageldi and Veluchamy, Alaguraj and Ali, Shahjahan and Bernal, Axel and del Campo, Javier and Cihlar, Jaromir and Flegontov, Pavel and Gornik, Sebastian G. and Hajduskova, Eva and Horak, Ales and Janouskovec, Jan and Katris, Nicholas J. and Mast, Fred D. and Miranda-Saavedra, Diego and Mourier, Tobias and Naeem, Raeece and Nair, Mridul and Panigrahi, Aswini K. and Rawlings, Neil D. and Padron-Regalado, Eriko and Ramaprasad, Abhinay and Samad, Nadira and Tomcala, Ales and Wilkes, Jon and Neafsey, Daniel E. and Doerig, Christian and Bowler, Chris and Keeling, Patrick J. and Roos, David S. and Dacks, Joel B. and Templeton, Thomas J. and Waller, Ross F. and Lukes, Julius and Obornik, Miroslav and Pain, Arnab} } @article { ISI:000364504500016, title = {Citreicella manganoxidans sp nov., a novel manganese oxidizing bacterium isolated from a shallow water hydrothermal vent in Espalamaca (Azores)}, journal = {Antonie Van Leeuwenhoek International Journal of General and Molecular Microbiology}, volume = {108}, number = {6}, year = {2015}, month = {DEC}, pages = {1433-1439}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A Gram-stain negative, non-motile, non-spore forming, aerobic and rod or narrow lemon-shaped bacterial strain, VSW210(T), was isolated from surface seawater in a shallow water hydrothermal vent region in Espalamaca (Azores). Strain VSW210(T) was found to grow optimally at 30 A degrees C, at pH 7 and in the presence of 2-6 \% (w/v) NaCl. A neighbour-joining phylogenetic tree based on 16S rRNA gene sequences revealed that strain VSW210(T) clusters with the type strain Citreicella marina CK-I3-6(T) (sequence similarity value of 99.6 \%), but DNA-DNA hybridization showed DNA-DNA relatedness between the strain VSW210(T) and C. marina CK-I3-6(T) to be 55.8 +/- A 3.2 \%. The DNA G+C content of strain VSW210(T) was determined to be 67.4 mol\%. The cellular fatty acid profiles of strain VSW210(T) was found to contain C-18:1 omega 7c (80.1 \%) and C-16:0 (9.2 \%). The major polar lipids in strain VSW210(T) were identified as phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol and an unidentified phospholipid. Strain VSW210(T) was found to be able to oxidize soluble Mn(II) to insoluble MnO2, which was confirmed with LBB staining. Differential phenotypic properties and genetic uniqueness revealed that this strain VSW210(T) is distinguishable from other species of the genus Citreicella. On the basis of the data presented, strain VSW210(T) is considered to represent a novel species of the genus Citreicella, for which the name Citreicella manganoxidans sp. nov. is proposed. The type strain is VSW210(T) (=KCTC 32497(T) = MCC 2286(T)).

}, keywords = {Azores, Citreicella manganoxidans sp nov, Hydrothermal vent, Polyphasic taxonomy, Seawater}, issn = {0003-6072}, doi = {10.1007/s10482-015-0597-x}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Dastager, Syed Gulam and Liu, Qing and Li, Wen-Jun and Colaco, Ana} } @article {42632, title = {Clerodane type diterpene as a novel antifungal agent from polyalthia longifolia var. pendula}, journal = {European Journal of Medicinal Chemistry}, volume = {94}, year = {2015}, month = {FEB}, pages = {1{\textendash}7}, abstract = {

Bioactivity-guided chemical examination of methanolic extract of leaves of Polyalthia longifolia var. pendula led to the isolation of the active constituent, a diterpene 1 which was identified as 16α-hydroxycleroda-3,13(14)Z-dien-15,16-olide on the basis of its spectral data. Among the tested strains, diterpene 1 was found to exhibit antifungal activities having MIC90 values of 50.3, 100.6 and 201.2 μM against Candida albicans NCIM3557, Cryptococcus neoformans NCIM3542 (human pathogens) and Neurospora crassa NCIM870 (saprophyte), respectively. Initial, structure{\textendash}activity-relationship (SAR) data generated by synthesizing some derivatives revealed that the double bond between C3{\textendash}C4 and the free hydroxyl group at C16 are crucial for the antifungal activity of the diterpene 1. The mode of action of 1 in C. albicans is due to compromised cell membrane permeability and also probably due to disruption of cell wall structures. The red blood cell haemolysis of all the compounds (1{\textendash}4) did not show any significant haemolysis and was found to be less than 15\% for all the compounds when tested at highest concentration, i.e. 1200 μM. Interestingly, all the tested compounds inhibited Y{\textendash}H transition in dimorphic C. albicans NCIM3557 at much lower concentration than their MIC90 values. Determination of ROS generation by diterpene 1 using DCFH-DA and DHR123 (dihydrorhodamine) staining of C. albicans NCIM3557 indicated production of intracellular ROS as a mechanism of antifungal activity.

}, keywords = {Diterpene; Polyalthia longifolia; Isolation; Flash chromatography; Natural products; Antifungal activity}, doi = {10.1016/j.ejmech.2015.02.054}, author = {Bhattacharya, Asish K. and Chand, Hemender R. and John, Jyothis and Deshpande, Mukund V.} } @article { ISI:000352745300007, title = {Cloning, expression and in silico studies of a serine protease from a marine actinomycete (Nocardiopsis sp NCIM 5124)}, journal = {Process Biochemistry}, volume = {50}, number = {3}, year = {2015}, month = {MAR}, pages = {378-387}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

A serine protease (N. protease), from Nocardiopsis sp., was cloned and expressed in Escherichia coli and investigated for its potential kinetic stability. Protein expression using two vectors, pET-22b (+) and pET-39b (+) was compared based on proper folding and soluble expression of the protein. pET-39b (+) was found to be a better vector for soluble expression of this protease containing disulfide bonds. In silico studies were also carried out for N. protease. Homology modeling suggested N. protease to be a member of PA clan of proteases. The phylogenetic analysis showed relatedness of N. protease to kinetically stable proteases. Molecular docking studies performed exhibited interaction of a peptide substrate with catalytic pocket of the enzyme. High temperature MD simulations were performed on N. protease to study its unfolding behavior and comparisons were made with alpha LP. A novel approach to study {\textquoteleft}cooperativity{\textquoteright} of protein unfolding was undertaken, wherein {\textquoteleft}P{\textquoteright} value analysis based on phi and psi values of the protein was performed. Data showed sharper P value transition for alpha LP when compared to N. protease thus indicating relatively less kinetic stability of N. protease. Present study holds significance as the non-streptomycete actinomycetes group is least explored and ensures industrially important enzymes with exceptional stabilities. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Actinomycetes, Cloning and expression, Kinetic stability, Protease, Thermal simulation}, issn = {1359-5113}, doi = {10.1016/j.procbio.2014.12.025}, author = {Rohamare, Sonali and Gaikwad, Sushama M. and Jones, Dafydd and Bhavnani, Varsha and Pal, Jayanta and Sharma, Ranu and Chatterjee, Prathit} } @article { ISI:000360404400089, title = {Cobalt ferrite nanoparticles: a magnetically separable and reusable catalyst for Petasis-Borono-Mannich reaction}, journal = {RSC Advances}, volume = {5}, number = {86}, year = {2015}, month = {AUG}, pages = {70586-70594}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Magnetically separable cobalt ferrite nanoparticles (CoFe2O4, NPS) have been demonstrated for the first time as an efficient catalyst in Petasis-Borono-Mannich (PBM) reaction between salicylaldehydes, sec. amines and aryl boronic acids to furnish alkylaminophenols in high yields. Relatively shorter reaction times, easy purification of the products and reusability of the catalyst for five consecutive runs without appreciable loss in it{\textquoteright}s activity are the noteworthy features of the developed protocol.

}, issn = {2046-2069}, doi = {10.1039/c5ra10693a}, author = {Kulkarni, Aparna M. and Pandit, Kapil S. and Chavan, Pramod V. and Desai, Uday V. and Wadgaonkar, Prakash P.} } @article { ISI:000357192200003, title = {Compact polar moieties induce lipid-water systems to form discontinuous reverse micellar phase}, journal = {Soft Matter}, volume = {11}, number = {27}, year = {2015}, month = {MAY}, pages = {5417-5424}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The role of molecular interactions in governing lipid mesophase organization is of fundamental interest and has technological implications. Herein, we describe an unusual pathway for monoolein/water reorganization from a bicontinuous mesophase to a discontinuous reverse micellar assembly, directed by the inclusion of polar macromolecules. This pathway is very different from those reported earlier, wherein the Fd3m phase formed only upon addition of apolar oils. Experiments and molecular dynamics simulations indicate that hydrophilic ternary additives capable of inducing discontinuous phase formation must (i) interact strongly with the monoolein head group and (ii) have a compact molecular architecture. We present a detailed investigation that contrasts a monoolein-water system containing polyamidoamine (PAMAM) dendrons with one containing their linear analogs. The Fd3m phase forms only on the addition of PAMAM dendrons but not their linear analogs. Thus, the dendritic architecture of PAMAM plays an important role in determining lipid mesophase behavior. Both dendrons and their linear analogs interact strongly with monoolein through their amine groups. However, while linear polymers adsorb and spread on monoolein, dendrons form aggregates that interact with the lipid. Dendrons induce formation of an intermediate reverse hexagonal phase, which subsequently restructures into the Fd3m phase. Finally, we demonstrate that other additives with compact structures that are known to interact with monoolein, such as branched polyethylenimine and polyhedral silsesquioxane cages, also induce the formation of the Fd3m phase.

}, issn = {1744-683X}, doi = {10.1039/c5sm00854a}, author = {Kumar, Manoj and Patil, Naganath G. and Choudhury, Chandan Kumar and Roy, Sudip and Ambade, Ashootosh V. and Kumaraswamy, Guruswamy} } @article { ISI:000348650000002, title = {Comparison of human cell signaling pathway databases-evolution, drawbacks and challenges}, journal = {Database-the Journal of Biological Databases and Curation}, year = {2015}, month = {JAN}, pages = {Article Number: bau126}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

Elucidating the complexities of cell signaling pathways is of immense importance to gain understanding about various biological phenomenon, such as dynamics of gene/protein expression regulation, cell fate determination, embryogenesis and disease progression. The successful completion of human genome project has also helped experimental and theoretical biologists to analyze various important pathways. To advance this study, during the past two decades, systematic collections of pathway data from experimental studies have been compiled and distributed freely by several databases, which also integrate various computational tools for further analysis. Despite significant advancements, there exist several drawbacks and challenges, such as pathway data heterogeneity, annotation, regular update and automated image reconstructions, which motivated us to perform a thorough review on popular and actively functioning 24 cell signaling databases. Based on two major characteristics, pathway information and technical details, freely accessible data from commercial and academic databases are examined to understand their evolution and enrichment. This review not only helps to identify some novel and useful features, which are not yet included in any of the databases but also highlights their current limitations and subsequently propose the reasonable solutions for future database development, which could be useful to the whole scientific community.

}, issn = {1758-0463}, doi = {10.1093/database/bau126}, author = {Chowdhury, Saikat and Sarkar, Ram Rup} } @article { ISI:000349401300020, title = {Conformational modulation of peptides using beta-amino benzenesulfonic acid ((S)Ant)}, journal = {Organic \& Biomolecular Chemistry}, volume = {13}, number = {7}, year = {2015}, month = {DEC}, pages = {2087-2091}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication describes the utility of a conformationally restricted aromatic beta-amino acid (2-aminobenzenesulfonic acid, (S)Ant) inducing various folding interactions in short peptides. Sandwiching (S)Ant between diverse amino acid residues was shown to form robust folded architectures featuring a variety of H-bonded networks, suggesting its utility in inducing peptide folding.

}, issn = {1477-0520}, doi = {10.1039/c4ob02421d}, author = {Priya, Gowri and Kotmale, Amol S. and Chakravarty, Debamitra K. and Puranik, Vedavati G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000364613700010, title = {Construction and structural diversity of Cd-MOFs with pyrazole based flexible ligands and positional isomer of naphthalenedisulfonate}, journal = {Inorganic Chemistry Communications}, volume = {61}, year = {2015}, month = {NOV}, pages = {35-40}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In the present communication, we have reported the construction of a series of Cd(II)-MOFs using conformationally flexible ligand (CFL); 3,3{\textquoteright},5,5{\textquoteright}-tetramethy1-4,4{\textquoteright}-bipyrazolyl (H(2)BPz), flexible bent ligand (FBL); methylenebis-(3,5-dimethylpyrazole) (H(2)MBPz) and positional isomer of naphthalene disulfonic acid salt ligands (1,5-NDS, 2,6-NDS). By using these ligands, four new coordination polymers namely [Cd(H(2)MBPz)(2) center dot 1,5-NDSA](n) (NDS-MOF-1), [Cd(H(2)BPz)center dot 1,5-NDSA](n) (NDS-MOF-2), {[Cd(H(2)MBPz)(2)](2+)center dot 2,6-NDSA(2-)}(n), (NDS-MOF-3) and {[Cd(H(2)BPz)(2)](2+).2,6-NDSA(n)(2-}) (NDS-MOF-4) have been synthesized. The crystal structure analysis revealed that the employment of positional isomeric naphthalene disulfonic acid salts resulted in different architectures ranging from one dimensional chain to two dimensional grid network and further connected into a three dimensional supramolecular structure through intermolecular hydrogen bonds, pi center dot center dot center dot pi and C-H center dot center dot center dot pi interactions. In addition, the photophysical properties and thermal stability studies for all the NDS-M0F5 1-4 were also investigated. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Cadmium(II), Conformation, coordination polymers, Naphthalenedisulfonate, Photophysical properties, thermal stability}, issn = {1387-7003}, doi = {10.1016/j.inoche.2015.08.009}, author = {Singh, Udai P. and Singh, Neetu and Chandra, Suman} } @article { ISI:000365529900006, title = {Cyclic cationic peptides containing sugar amino acids selectively distinguishes and inhibits maturation of pre-mirnas of the same family}, journal = {Nucleic Acid Therapeutics}, volume = {25}, number = {6}, year = {2015}, month = {DEC}, pages = {323-329}, publisher = {MARY ANN LIEBERT, INC}, address = {140 HUGUENOT STREET, 3RD FL, NEW ROCHELLE, NY 10801 USA}, abstract = {

The discovery of microRNAs (miRNAs) has added a new dimension to the gene regulatory networks, making aberrantly expressed miRNAs as therapeutically important targets. Small molecules that can selectively target and modulate miRNA levels can thus serve as lead structures. Cationic cyclic peptides containing sugar amino acids represent a new class of small molecules that can target miRNA selectively. Upon treatment of these small molecules in breast cancer cell line, we profiled 96 therapeutically important miRNAs associated with cancer and observed that these peptides can selectively target paralogous miRNAs of the same seed family. This selective inhibition is of prime significance in cases when miRNAs of the same family have tissue-specific expression and perform different functions. During these conditions, targeting an entire miRNA family could lead to undesired adverse effects. The selective targeting is attributable to the difference in the three-dimensional structures of precursor miRNAs. Hence, the core structure of these peptides can be used as a scaffold for designing more potent inhibitors of miRNA maturation and hence function.

}, issn = {2159-3337}, doi = {10.1089/nat.2015.0554}, author = {Nahar, Smita and Bose, Debojit and Pal, Sudip and Chakraborty, Tushar Kanti and Maiti, Souvik} } @article { ISI:000346006700016, title = {Decoration of CdS nanoparticles on 3D self-assembled ZnO nanorods: a single-step process with enhanced field emission behaviour}, journal = {CrystEngComm}, volume = {17}, number = {1}, year = {2015}, month = {NOV}, pages = {140-148}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A well-defined CdS-ZnO heteroarchitecture has been synthesized via a facile single-step hydrothermal approach. The morphological and structural studies reveal the formation of 3D nano-architectures, in which self-assembled ZnO nanorods (diameter similar to 50 nm) are well decorated with single crystalline CdS nanoparticles (size similar to 10 nm). The CdS-ZnO heteroarchitecture exhibits a remarkable change in the optical absorption due to the surface modification of ZnO nanorods by CdS. Surprisingly, under identical reaction conditions, the global ZnS nanoparticles are selectively grown at the apex of ZnO nanorods on the Zn substrate. Furthermore, a plausible growth mechanism has been presented on the basis of experimental results. Interestingly, the CdS-ZnO heteroarchitecture shows enhanced field emission properties such as low turn-on field, high emission current density and better current stability in comparison to other ZnO-based nanostructures. The present CdS-ZnO heteroarchitecture could be extended to other potential applications, such as chemical sensors, photodetectors, optoelectronic devices, and photocatalysts.

}, issn = {1466-8033}, doi = {10.1039/c4ce01738b}, author = {Warule, Sambhaji S. and Chaudhari, Nilima S. and Shisode, Raju T. and Desa, Keith V. and Kale, Bharat B. and More, Mahendra A.} } @article { ISI:000361004700026, title = {Design and synthesis of 11 alpha-substituted bile acid derivatives as potential anti-tuberculosis agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {25}, number = {19}, year = {2015}, month = {OCT}, pages = {4185-4190}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We have synthesized a series of novel 11 alpha-triazoyl bile acid derivatives. In addition, we also have synthesized N-alkyl and N-acyl derivatives of C-11 amino bile acid esters. All the compounds were evaluated for the inhibitory activity against Mycobacterium tuberculosis H37Ra (MTB) at 30 mu g/mL level. Four lead compounds (2b, 3, 7 and 8) were further confirmed from their dose dependent effect against MTB. These compounds were found to be active against Dormant and active stage MTB under both in vitro as well as within THP1 host macrophages. The most promising compound 2b showed strong antitubercular activities against MTB under in vitro and ex vivo (IC90 value of similar to 3 mu g/mL) conditions and almost insignificant cytotoxicity up to 100 mu g/mL against THP-1, A549 and PANC-1 human cancer cell lines. Inactivity of all these compounds against Gram positive and Gram negative bacteria indicates their specificity. Molecular docking studies of these compounds into the active site of DprE1 enzyme revealed a similar binding mode to native ligands in the crystal structure thereby helping to establish a structural basis of inhibition of MTB. The synthesized compounds were analyzed for ADME properties and showed potential to develop good oral drug candidates. Our results clearly indicate the identification of some novel, selective and specific inhibitors against MTB that can be explored further for potential antitubercular drug. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Antituberculosis, Bile acids, Cycloaddition, Docking study, In silico ADME}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2015.08.006}, author = {Pore, Vandana S. and Divse, Jaisingh M. and Charolkar, Chaitanya R. and Nawale, Laxman U. and Khedkar, Vijay M. and Sarkar, Dhiman} } @article { ISI:000360825100003, title = {Design and synthesis of cauliflower-shaped hydroxyl functionalized core-shell polymer}, journal = {Designed Monomers and Polymers}, volume = {18}, number = {8}, year = {2015}, month = {NOV}, pages = {723-733}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Conventional crosslinked polymers and homopolymers both have their own limitations. As a result, core-shell polymer was synthesized to obtain cauliflower-shaped and highly hydroxyl functionalized polymer. For the core, acrylate-based copolymers were synthesized by varying crosslinkers and porogens at different crosslink density. Owing to high surface area (554 m(2)/g), poly(MMA-co-DVB) was used as a core and low-molecular weight (24,600g/mol) poly(GMA) was used as a shell in core-shell approach. Average particle sizes of the core polymers were in the range of 15-75 mu m. In order to evaluate reactivity efficiency of core-shell polymer, hydroxyl content was evaluated with a value of 3.97mmol/g. Importantly, hydroxyl content demonstrated the successful increase in reactive sites of the core-shell polymer over conventional crosslinked hydroxyl polymer. Notably, synthesized core-shell polymer has more surface area and pore volume which substantially attributes for better polymer efficiency during application. Scanning electron microscopy images revealed the spherical, uniform, and slightly conglomerated properties of core-shell polymer. Due to higher reactivity, insolubility, and more surface area of hydroxyl functionalized core-shell polymer, its use become inevitably essential.

}, keywords = {C-13 solid state NMR, cauliflower-shaped porous beads, core-shell polymer, hydroxyl functionalization, surface area}, issn = {1385-772X}, doi = {10.1080/15685551.2015.1070504}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article { ISI:000364906600041, title = {Detailed study on the thermal, photo-physical and electrochemical properties and OFET applications of D-pi-A-pi-D structured unsymmetrical diketopyrrolopyrrole materials}, journal = {RSC Advances}, volume = {5}, number = {115}, year = {2015}, month = {OCT}, pages = {94859-94865}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of seven unsymmetrical diketopyrrolopyrrole (DPP) derivatives with donor-pi-acceptor-pi-donor (D-pi-A-pi-D) architecture have been designed, synthesized and well characterised. The effect of the electron donating capacity and extent of electronic conjugation of the end-capping units on the thermal, photo-physical and electrochemical properties of the synthesized materials was thoroughly investigated using various experimental techniques and theoretical calculations. Organic field-effect transistors (OFETs) were fabricated using these materials to obtain their hole/electron transporting characteristics. All these materials showed moderate to good hole transporting ability, and the OFET fabricated using the DPP-derivative with benzofuran and pyrene end groups exhibited a hole mobility of 6.7 x 10(-4) cm(2) V-1 s(-1) with VT of similar to 9 V. The observed photo-physical, electrochemical, thermal, and charge carrier properties of the synthesized DPP-derivatives indicated their applicability in various areas like organic photovoltaics, disposable electronics and biomedical devices.

}, issn = {2046-2069}, doi = {10.1039/c5ra16653e}, author = {Bharath, D. and Chithiravel, Sundaresan and Sasikumar, M. and Chereddy, Narendra Reddy and Shanigaram, Balaiah and Bhanuprakash, K. and Krishnamoorthy, K. and Rao, V. Jayathirtha} } @article { ISI:000369744300004, title = {Differential dynamics of the serotonin(1A) receptor in membrane bilayers of varying cholesterol content revealed by all atom molecular dynamics simulation}, journal = {Molecular Membrane Biology}, volume = {32}, number = {4}, year = {2015}, month = {MAY}, pages = {127-137}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

The serotonin(1A) receptor belongs to the superfamily of G protein-coupled receptors (GPCRs) and is a potential drug target in neuropsychiatric disorders. The receptor has been shown to require membrane cholesterol for its organization, dynamics and function. Although recent work suggests a close interaction of cholesterol with the receptor, the structural integrity of the serotonin(1A) receptor in the presence of cholesterol has not been explored. In this work, we have carried out all atom molecular dynamics simulations, totaling to 3s, to analyze the effect of cholesterol on the structure and dynamics of the serotonin(1A) receptor. Our results show that the presence of physiologically relevant concentration of membrane cholesterol alters conformational dynamics of the serotonin(1A) receptor and, on an average lowers conformational fluctuations. Our results show that, in general, transmembrane helix VII is most affected by the absence of membrane cholesterol. These results are in overall agreement with experimental data showing enhancement of GPCR stability in the presence of membrane cholesterol. Our results constitute a molecular level understanding of GPCR-cholesterol interaction, and represent an important step in our overall understanding of GPCR function in health and disease.

}, keywords = {GPCR, Membrane cholesterol, molecular dynamics simulation, serotonin(1A) receptor}, issn = {0968-7688}, doi = {10.3109/09687688.2015.1096971}, author = {Patra, Swarna M. and Chakraborty, Sudip and Shahane, Ganesh and Prasanna, Xavier and Sengupta, Durba and Maiti, Prabal K. and Chattopadhyay, Amitabha} } @article { ISI:000353720700004, title = {Distinct molecular features facilitating ice-binding mechanisms in hyperactive antifreeze proteins closely related to an Antarctic sea ice bacterium}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {33}, number = {7}, year = {2015}, month = {JUL}, pages = {1424-1441}, publisher = {TAYLOR \& FRANCIS INC}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

Antifreeze proteins or ice-binding proteins (IBPs) facilitate the survival of certain cellular organisms in freezing environment by inhibiting the growth of ice crystals in solution. Present study identifies orthologs of the IBP of Colwellia sp. SLW05, which were obtained from a wide range of taxa. Phylogenetic analysis on the basis of conserved regions (predicted as the {\textquoteleft}ice-binding domain{\textquoteright} [IBD]) present in all the orthologs, separates the bacterial and archaeal orthologs from that of the eukaryotes{\textquoteright}. Correspondence analysis pointed out that the bacterial and archaeal IBDs have relatively higher average hydrophobicity than the eukaryotic members. IBDs belonging to bacterial as well as archaeal AFPs contain comparatively more strands, and therefore are revealed to be under higher evolutionary selection pressure. Molecular docking studies prove that the ice crystals form more stable complex with the bacterial as well as archaeal proteins than the eukaryotic orthologs. Analysis of the docked structures have traced out the ice-binding sites (IBSs) in all the orthologs which continue to facilitate ice-binding activity even after getting mutated with respect to the well-studied IBSs of Typhula ishikariensis and notably, all these mutations performing ice-binding using {\textquoteleft}anchored clathrate mechanism{\textquoteright} have been found to prefer polar and hydrophilic amino acids. Horizontal gene transfer studies point toward a strong selection pressure favoring independent evolution of the IBPs in some polar organisms including prokaryotes as well as eukaryotes because these proteins facilitate the polar organisms to acclimatize to the adversities in their niche, thus safeguarding their existence.

}, keywords = {antifreeze proteins, horizontal gene transfer, ice-recrystallization inhibition, Molecular docking, Phylogenetic analysis}, issn = {0739-1102}, doi = {10.1080/07391102.2014.952665}, author = {Banerjee, Rachana and Chakraborti, Pratim and Bhowmick, Rupa and Mukhopadhyay, Subhasish} } @article { ISI:000365203000020, title = {Doxorubicin-conjugated beta-NaYF4:Gd3+/Tb3+ multifunctional, phosphor nanorods: a multimodal, luminescent, magnetic probe for simultaneous optical and magnetic resonance imaging and an excellent pH-triggered anti-cancer drug delivery nanovehicle}, journal = {Nanoscale}, volume = {7}, number = {46}, year = {2015}, month = {OCT}, pages = {19501-19518}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein, we report the fabrication of a multifunctional nanoprobe based on highly monodispersed, optically and magnetically active, biocompatible, PEI-functionalized, highly crystalline beta-NaYF4:Gd3+/Tb3+ nanorods as an excellent multi-modal optical/magnetic imaging tool and a pH-triggered intracellular drug delivery nanovehicle. The static and dynamic photoluminescence spectroscopy showed the presence of sharp emission peaks, with long lifetimes (similar to 3.5 milliseconds), suitable for optical imaging. The static magnetic susceptibility measurements at room temperature showed a strong paramagnetic signal (chi similar to 3.8 x 10(-5) emu g(-1) Oe(-1)). The nuclear magnetic resonance (NMR) measurements showed fair T-1 relaxivity (r(1) = 1.14 s(-1) mM(-1)) and magnetic resonance imaging gave enhanced T-1-weighted MRI images with increased concentrations of beta-NaYF4:Gd3+/Tb3+ making them suitable for simultaneous magnetic resonance imaging. In addition, an anticancer drug, doxorubicin (DOX) was conjugated to the amine-functionalized beta-NaYF4:Gd3+/Tb3+ nanorods via pH-sensitive hydrazone bond linkages enabling them as a pH-triggered, site-specific drug delivery nanovehicle for DOX release inside tumor cells. A comparison between in vitro DOX release studies undertaken in normal physiological (pH 7.4) and acidic (pH 5.0) environments showed an enhanced DOX dissociation (similar to 80\%) at pH 5.0. The multifunctional material was also applied as an optical probe to confirm the conjugation of DOX and to monitor DOX release via a fluorescence resonance energy transfer (FRET) mechanism. The DOX-conjugated beta-NaYF4:Gd3+/Tb3+ nanorods exhibited a cytotoxic effect on MCF-7 breast cancer cells and their uptake by MCF-7 cells was demonstrated using confocal laser scanning microscopy and flow cytometry. The comparative cellular uptakes of free DOX and DOX-conjugated beta-NaYF4:Gd3+/Tb3+ nanorods were studied in tumor microenvironment conditions (pH 6.5) using confocal imaging, which showed an increased uptake of DOX-conjugated beta-NaYF4:Gd3+/Tb3+ nanorods. Thus, DOX-conjugated beta-NaYF4:Get(3+)/Tb3+ nanorods combining pH-triggered drug delivery, efficient luminescence and paramagnetic properties are promising for a potential multifunctional platform for cancer therapy, biodetection, and optical and magnetic resonance imaging.

}, issn = {2040-3364}, doi = {10.1039/c5nr04473a}, author = {Padhye, Preeti and Alam, Aftab and Ghorai, Suvankar and Chattopadhyay, Sarnit and Poddar, Pankaj} } @article {42918, title = {Emerging energy applications of two-dimensional layered materials}, journal = {Canadian Chemical Transactions}, volume = {3}, year = {2015}, month = {MAR}, pages = {118-157}, abstract = {

Atomically thin semiconducting transition metal dichalcogenides (TMDCs) layered materials have recently been emerged as an exciting area of research due to accessibility for easy synthesis using various chemical and physical methods. These two-dimensional (2D) layered materials with single layer have direct and wide band gap due to which, they are more suitable for nanoelectronics and optoelectronics device applications. Here, we present a review of the energy related aspects of atomically thin layered materials like MoS2, WS2, MoSe2, WSe2, InSe, GaSe, GaTe, MoTe2, WTe2 etc. for supercapacitor, solar cell, lithium ion battery and water splitting application. By significantly assessing various materials and comparing their performances with challenging technology, the advantages and disadvantages of this promising area of energy materials are recognized, which may provide guidelines for future progress.

}, doi = {10.13179/canchemtrans.2015.03.02.0174}, author = {Late, Dattatray J. and Rout, Chandra Sekhar and Chakravarty, Disha and Ratha, Satyajit} } @article { ISI:000355987900093, title = {Enantioselective syntheses of (R)-pipecolic acid, (2R,3R)-3-hydroxypipecolic acid, beta-(+)-conhydrine and (-)-swainsonine using an aziridine derived common chiral synthon}, journal = {RSC Advances}, volume = {5}, number = {62}, year = {2015}, month = {MAY}, pages = {50580-50590}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Concise total syntheses of (R)-pipecolic acid, (R)-ethyl-6-oxopipecolate, (2R, 3R)-3-hydroxypipecolic acid and formal syntheses of beta-(+)-conhydrine, (-)-lentiginosine, (-)-swainsonine and 1,2-di-epi-swainsonine have been accomplished starting from a common chiral synthon. The present strategy employs regioselective aziridine ring opening, Wittig olefination and RCM as the key chemical transformations.

}, issn = {2046-2069}, doi = {10.1039/c5ra06429e}, author = {Chavan, Subhash P. and Khairnar, Lalit B. and Pawar, Kailash P. and Chavan, Prakash N. and Kawale, Sanket A.} } @article { ISI:000354199900072, title = {Environmentally friendly route for grafting of molybdenum carbonyl onto a diaminosilane-modified SBA-15 molecular sieve and its catalytic behaviour in olefin epoxidation}, journal = {New Journal of Chemistry}, volume = {39}, number = {5}, year = {2015}, month = {FEB}, pages = {3758-3764}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A simple route has been established for grafting molybdenum carbonyl onto the surface of a diaminosilane-modified SBA-15 molecular sieve. The successful grafting of the molybdenum carbonyl species onto diamine-functionalized SBA-15 was evident from FT-IR studies. The resultant molybdenum-carbonyl-complex-grafted SBA-15 (SBA-DA-Mo) materials show promising activity for the epoxidation of various olefins with good conversion (90-95\%) and the formation of epoxide as the major product. The catalytic activity remains constant over several runs.

}, issn = {1144-0546}, doi = {10.1039/c4nj02402h}, author = {Baskaran, Thangaraj and Kumaravel, Raju and Christopher, Jayaraj and Ajithkumar, Thalasseril G. and Sakthivel, Ayyamperumal} } @article { ISI:000361120000056, title = {Evaluation of imidazolium-based ionic liquids towards vermicidal activity: in vitro \& in silico studies}, journal = {RSC Advances}, volume = {5}, number = {92}, year = {2015}, month = {AUG}, pages = {75415-75424}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of six different ionic liquids (ILs) of the kind 1-alkyl-3-methylimidazolium bromide/hydroxide (IL-Br and IL-OH) tailored with different N-alkyl side chains (ethyl, butyl, octyl) were synthesized and evaluated for their vermicidal activity against the Indian earthworm, Pheretima posthuma. The percentage of paralysis and mortality of earthworms against ILs were recorded in a dose dependent (at different concentrations 2, 4, 8 and 16 mM) and time dependent manner. The ILs with hydroxide as the counter anion (IL-OH) showed higher vermicidal activity compared to their bromide counterparts (IL-Br). Moreover, the ILs with the longest alkyl chain (octyl) were observed to have significant vermicidal activity compared to the rest (ethyl and butyl) as well as the standard drug, Albendazole. Furthermore, theoretical modeling was carried out to visualize the preferential docking positions of these ILs into the active site of beta-tubulin. Fascinatingly, it was found that the ILs with longest alkyl side chain showed remarkable vermicidal activity compared to the rest, and the molecular docking studies not only validated the experimental results, but also showed per-residue interaction analysis between the ILs and the different components of beta-tubulin.

}, issn = {2046-2069}, doi = {10.1039/c5ra13469b}, author = {Charan, K. T. Prabhu and Ranjan, Prabodh and Manojkumar, Kasina and Pothanagandhi, Nellepalli and Jha, Prakash C. and Khedkar, Vijay M. and Sivaramakrishna, Akella and Vijayakrishna, Kari} } @article { ISI:000352803900014, title = {Exfoliation of bulk inorganic layered materials into nanosheets by the rapid quenching method and their electrochemical performance}, journal = {European Journal of Inorganic Chemistry}, number = {11}, year = {2015}, month = {APR}, pages = {1973-1980}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report herein the results of our investigations on the synthesis of transition-metal dichalcogenide (TMDC) semiconductor layered materials of MoS2, WS2, MoSe2, and WSe2 by the rapid quenching method. The bulk powders were added to deionized water in a polypropylene tube and subsequently flushed with argon gas. Thirty rapid freezing (30 s in a liquid nitrogen bath) and heating (20 min in an oil bath at 60 degrees C) cycles were then carried out. The reaction product was obtained in a yield in excess of 60 wt.-\%, which indicates that the method can be utilized on an industrial scale for the production of 2D nanosheets. The as-synthesized products were then characterized by TEM, which revealed nanosheet-like morphologies. Raman spectroscopy confirmed the high quality of the nanosheet samples. The exfoliated samples also showed good electrochemical performance. Of the TMDC samples investigated, the WSe2 nanosheets were found to give the best performance due to their uniform morphology, large surface area, and fewest number of defects.

}, keywords = {chalcogenides, Electrochemistry, Layered compounds, Molybdenum, Nanostructures, Tungsten}, issn = {1434-1948}, doi = {10.1002/ejic.201500039}, author = {Chakravarty, Disha and Late, Dattatray J.} } @article { ISI:000359867300004, title = {Extrusion film casting of long chain branched polypropylene}, journal = {Polymer Engineering and Science}, volume = {55}, number = {9}, year = {2015}, month = {SEP}, pages = {1977-1987}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Extrusion film casting (EFC) is an important melt processing operation which is extensively used to make polypropylene (PP) films. Linear PP shows significant amount of necking and draw resonance during EFC. One of the ways to reduce necking is to introduce long chain branches (LCB) on the polymer backbone. The long branches impart extensional strain hardening behavior thereby stabilizing the melt flow. In this work, we investigate the influence of long chain branching in polypropylene on the extent of necking in the EFC process. Laboratory scale EFC experiments were performed on homopolymer PP of linear and long chain branched architectures. Simulations of the EFC process were carried out using the one-dimensional flow model of Silagy et al., Polym. Eng. Sci.,36, 2614 (1996) into which we incorporate two different multi-mode molecular constitutive equations namely, the eXtended Pom-Pom{\textquoteright} equation (XPP, for long chain branched PP) and the Rolie-Poly{\textquoteright} equation (RP-S, for linear PP). Our experimental data confirm that presence of long chain branching in PP reduces the extent of necking and our numerical predictions show qualitative agreement with experimental data, thereby elucidating the role of chain architecture on the extent of necking. POLYM. ENG. SCI., 55:1977-1987, 2015. (c) 2014 Society of Plastics Engineers

}, issn = {0032-3888}, doi = {10.1002/pen.24039}, author = {Chikhalikar, Kalyani and Banik, Sourya and Azad, Lal Busher and Jadhav, Kishor and Mahajan, Sunil and Ahmad, Zubair and Kulkarni, Surendra and Gupta, Surendra and Doshi, Pankaj and Pol, Harshawardhan and Lele, Ashish K.} } @article {45884, title = {Fluorescent probe for specific detection of cysteine in the lipid dense region of cells}, journal = {Chemical Communications}, volume = {51}, year = {2015}, month = {SEP}, pages = {16932-16935}, type = {Article}, abstract = {

A new cysteine (Cys) specific chemodosimetric reagent (ER-F) is used in imaging of endogenous Cys localized in the lipid dense region of the live Hct116 cells and the release of Cys within HepG2 cells from a drug following a biochemical transformation. A silica surface, modified with ER-F, could be used for quantitative estimation of Cys present in aqueous solution (pH 7.2) and in a human blood plasma (HBP).

}, issn = {1359-7345}, doi = {10.1039/c5cc07450a}, author = {Ali, Firoj and Anila, H. A. and Taye, Nandaraj and Gonnade, Rajesh G. and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000365532000008, title = {Fluorescent probes for the detection of cyanide ions in aqueous medium: cellular uptake and assay for beta-glucosidase and hydroxynitrile lyase}, journal = {Journal of Materials Chemistry B}, volume = {3}, number = {47}, year = {2015}, month = {OCT}, pages = {9148-9156}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A chemodosimteric reagent (1) for the efficient detection of cyanide species (CN- and/or HCN) in aq. medium as well as under physiological conditions has been described. Selective reaction of the cyanide species with this reagent in the presence of all common interfering anions, amino acids and glutathione (GSH) led to the generation of the corresponding cyanohydrin derivative. The formation of the cyanohydrin derivative of the probe is associated with a visually detectable change in solution fluorescence in aq. buffer medium with 1.9 mu M NaCN, the threshold limit set by WHO for the safe drinking water and this makes this fluorogenic sensor an ideal candidate for in-field applications. An apparent switch on the luminescence response, ultralow detection limit, low response time, cell membrane permeability and insignificant toxicity are key features of a probe molecule, which gives it a distinct edge over previously reported chemodosimetric reagents for the detection of cyanide species (CN- or HCN) in an aqueous environment. This methodology could be used for developing a generalized and efficient fluorescence-based assay for crucial enzymes like beta-glucosidase and hydroxynitrile lyase. Furthermore, spectrally-resolved fluorescence microscopy measurements on single-cells revealed that this sensor molecule could also be used for imaging the cellular uptake of cyanide species from aq. solution contaminated with NaCN. Our results confirmed that statistical analysis of integrated intensity and transition energy obtained from the emission spectra collected over various microscopic sub-cellular regions can potentially be used to discriminate the effects of local cellular environments and that due to cyanide detection.

}, issn = {2050-750X}, doi = {10.1039/c5tb01853f}, author = {Agarwalla, Hridesh and Gangopadhyay, Monalisa and Sharma, Dharmendar Kumar and Basu, Santanu Kumar and Jadhav, Sameer and Chowdhury, Arindam and Das, Amitava} } @article { ISI:000349061500011, title = {Formal syntheses of (2R,3R)-3-hydroxy pipecolic acid and (2R,3S)-3-hydroxy pipecolic acid from L-ascorbic acid}, journal = {Tetrahedron Letters}, volume = {56}, number = {6}, year = {2015}, month = {FEB}, pages = {805-807}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Formal syntheses of both cis and trans 3-hydroxy pipecolic acids is achieved from L-ascorbic acid. Present synthesis describes use of chiral pool approach in which epimerization, Staudinger reaction and Cyclization reactions were employed as key steps. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {3-Hydroxy pipecolic acid, cyclization, Epimerization, L-Ascorbic acid}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2014.12.103}, author = {Chavan, Subhash P. and Dumare, Nilesh B. and Pawar, Kailash P.} } @article { ISI:000365462900005, title = {FRET-based probe for monitoring pH changes in lipid-dense region of Hct116 cells}, journal = {Organic Letters}, volume = {17}, number = {22}, year = {2015}, month = {NOV}, pages = {5532-5535}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A rhodamine conjugate (L) with a pseudo Stokes shift of 165 nm is used for probing changes in solution pH under physiological conditions. This reagent is found to be nontoxic, and the luminescence response could be used for imaging changes in endogenous pH induced by dexamethanose (DMT) in the endoplasmic reticulum.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.5b02568}, author = {Reddy, Upendar G. and Anila, H. A. and Ali, Firoj and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000360634900028, title = {Graphene quantum dots as enhanced plant growth regulators: effects on coriander and garlic plants}, journal = {Journal of the Science of Food and Agriculture}, volume = {95}, number = {13}, year = {2015}, month = {OCT}, pages = {2772-2778}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

BACKGROUNDWe report investigations on the use of graphene quantum dots for growth enhancement in coriander (Coriandrum sativam L.) and garlic (Allium sativum) plants. The as-received seeds of coriander and garlic were treated with 0.2 mg mL(-1) of graphene quantum dots for 3 h before planting. RESULTSGraphene quantum dots enhanced the growth rate in coriander and garlic plants, including leaves, roots, shoots, flowers and fruits, when the seeds were treated with graphene quantum dots. CONCLUSIONOur investigations open up the opportunity to use graphene quantum dots as plant growth regulators that can be used in a variety of other food plants for high yield. (c) 2015 Society of Chemical Industry

}, keywords = {farming, food, graphene quantum dots, nanotechnology, plant growth regulator}, issn = {0022-5142}, doi = {10.1002/jsfa.7106}, author = {Chakravarty, Disha and Erande, Manisha B. and Late, Dattatray J.} } @article {42996, title = {High surface area porous carbon for ultracapacitor application by pyrolysis of polystyrene containing pendant carboxylic acid groups prepared via click chemistry}, journal = {Materials Today Communications}, volume = {4}, year = {2015}, month = {SEP}, pages = {166-175}, doi = {10.1016/j.mtcomm.2015.07.002}, author = {Chhatre, Shraddha and Aravindan, Vanchiappan and Puthusseri, Dhanya and Banerjee, Abhik and Madhavi, Srinivasan and Wadgaonkar, Prakash P. and Ogale, Satishchandra B.} } @article { ISI:000363996300005, title = {Highly enantioselective Pd-catalyzed synthesis of P-stereogenic supramolecular phosphines, self-assembly, and implication}, journal = {Organometallics}, volume = {34}, number = {20}, year = {2015}, month = {OCT}, pages = {4802-4805}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Metal-catalyzed asymmetric addition of a secondary phosphine to an aryl halide is one of the most efficient and reliable approaches for the construction of enantiopure carbon phosphorus bonds. An isolated Pd(II) complex (5) catalyzes the carbon phosphorus coupling reaction between tolylphenylphosphine (la) and 3-iodophenylurea (2b), which proceeds with an unprecedented enantiomeric excess (ee) of 97\%. The generality of the strategy has been demonstrated by preparing a small library of a new class of P-stereogenic phosphines with an in-built hydrogen bonding motif for the first time. The P-stereogenic phosphines self-assemble on a metal template via deliberately installed hydrogen-bonding motifs and mimic the bidentate ligand coordination. Interestingly, when it was employed in asymmetric hydrogenation, the supramolecular phosphine {1-(3-(phenyl(o-toly)phosphanyl)pheny)ureal} (6b) produced the corresponding hydrogenated product with the highest enantiomeric excess of 99\% along with excellent conversion, demonstrating the potential of these enantioenriched P-chirogenic supramolecular phosphines in asymmetric catalysis.

}, issn = {0276-7333}, doi = {10.1021/acs.organomet.5b00664}, author = {Koshti, Vijay S. and Mote, Nilesh R. and Gonnade, Rajesh G. and Chikkali, Samir H.} } @article { ISI:000348753400054, title = {Highly loaded well dispersed stable Ni species in NiXMg2AlOY nanocomposites: application to hydrogen production from bioethanol}, journal = {Applied Catalysis B-Environmental}, volume = {166}, year = {2015}, month = {MAY}, pages = {485-496}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Inexpensive NiXMg2AlOY nanocomposites with high Ni content (Ni wt\% \> 40\%) are developed as efficient catalysts for the sustainable hydrogen production from a mixture of ethanol and water at low temperature. The NiXMg2AlOY nanocomposites are composed of small and uniform nanoparticles (4-6 nm) of NiO, Ni-Mg-(Al)-O and/or MgO. The strong interactions existing between Ni2+ cations and Mg2+ and/or Al3+ cations either in the Ni-Mg-(Al)-O solid solution and/or at the interface of nanoparticles of NiO and/or Ni-Mg-(Al)-O make the catalyst highly active and stable. The behavior of the solids is analyzed in the presence of low and high concentrations of ethanol while maintaining a H2O/EtOH molar ratio of 3. The NiXMg2AlOY catalysts are shown to be efficient toward H-2 production between 250 and 650 degrees C. In the presence of low concentration of ethanol, on the highly loaded Ni compound (Ni12Mg2AlOY), total conversion of ethanol is obtained at 250 degrees C without formation of CO and carbon, and at 300 degrees C a H-2 yield of 3 mol moletEtOH(-1) is obtained without the formation of CO, exhibiting a remarkable stability with the time on stream even if some carbon is formed. In high concentration of ethanol, total conversion of ethanol is obtained at 450 degrees C on the highly loaded Ni compound (Ni12Mg2AlOY). In such conditions, a stable co-generation of carbon nanofibrous materials which amount increases with Ni content is also obtained. The catalytic stability is related to the type and morphology of the carbon species formed. The correlations among the catalyst properties, the catalytic performances and the characterizations are thoroughly discussed. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Ethanol, Hydrogen, Nanofibrous carbon, nickel oxide, Steam reforming}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.11.052}, author = {Fang, Wenhao and Paul, Sebastien and Capron, Mickael and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K. and Dumeignil, Franck and Jalowiecki-Duhamel, Louise} } @article { ISI:000364330600008, title = {Highly regioselective isomerizing hydroformylation of long-chain internal olefins catalyzed by a rhodium bis(phosphite) complex}, journal = {ChemCatChem}, volume = {7}, number = {21}, year = {2015}, month = {NOV}, pages = {3468-3471}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

The single-step synthesis, coordination behavior, and application of a bis(phosphite) ligand in the isomerizing hydroformylation of internal olefins was investigated. Interestingly, high-pressure NMR spectroscopy investigations revealed unexpected inequivalency of the two phosphorus nuclei, which display bisequatorial coordination of the bis(phosphite) ligand in a trigonal bipyramidal rhodium complex. Upon employment in the isomerizing hydroformylation of the exceedingly challenging plant oil derived substrate methyl oleate, the bis(phosphite) rhodium complex revealed an unprecedented linear selectivity of 75\%.

}, keywords = {alkenes, bis(phosphite)s, Hydroformylation, isomerization, Rhodium}, issn = {1867-3880}, doi = {10.1002/cctc.201500743}, author = {Pandey, Swechchha and Chikkali, Samir H.} } @article { ISI:000354199900081, title = {Hyperhydrophilic three-dimensional crosslinked beads as an effective drug carrier in acidic medium: adsorption isotherm and kinetics appraisal}, journal = {New Journal of Chemistry}, volume = {39}, number = {5}, year = {2015}, month = {JAN}, pages = {3835-3844}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Conventional drug delivery materials are known to provide slow and low drug loading in aqueous medium due to the hydrophobic or less hydrophilic properties of the carrier. However, the present study explored the synthesis of cheaply available metals modified with a hyperhydrophilic polymer. Hyperhydrophilic three-dimensional crosslinked beads as a drug carrier were synthesized with desirable properties that substantially influence the polymer efficiency. These synthesized polymers were characterized for surface area, particle size, acid content and morphology, and the metal modification was evaluated to obtain an efficient polymer for drug adsorption in an acidic medium. Contact time, which significantly affects drug adsorption was comparatively evaluated using the cheaply available metals, cobalt and nickel. Interestingly, an adsorption study revealed that gradual drug loading occurs during the initial 12 h. Afterwards, adsorption increases steadily and then stabilizes. Furthermore, theoretical predictions of adsorption, including Langmuir adsorption isotherm and pseudo order kinetics, were also evaluated. Remarkably, polymer supported Co/Ni demonstrated 85 and 78\% metoprolol drug adsorption, respectively, at an optimum pH of 3 after 24 h. Langmuir adsorption isotherm revealed monolayer adsorption on the polymer supported Co/Ni. Pseudo first and second order kinetics were also evaluated and demonstrated the adsorption mechanism and equilibrium adsorption capacity, respectively.

}, issn = {1144-0546}, doi = {10.1039/c4nj01999g}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article {43046, title = {Identification of Th1/Th2 regulatory switch to promote healing response during Leishmaniasis: a computational approach}, journal = {EURASIP Journal on Bioinformatics and Systems Biology}, volume = {1}, year = {2015}, month = {DEC}, abstract = {

Leishmania devices its survival strategy by suppressing the host{\textquoteright}s immune functions. The antigen molecules produced by Leishmania interferes with the host{\textquoteright}s cell signaling cascades and consequently changes the protein expression pattern of the antigen-presenting cell (APC). This creates an environment suitable for the switching of the T-cell responses from a healing Th1 response to a non-healing Th2 response that is favorable for the continued survival of the parasite inside the host APC. Using a reconstructed signaling network of the intracellular and intercellular reactions between a Leishmania infected APC and T-cell, we propose a computational model to predict the inhibitory effect of the Leishmania infected APC on the T-cell and to identify the regulators of this Th1-/Th2-switching behavior as observed during Leishmania infection. In this work, we hypothesize that a complete removal of the parasite could only be achieved with a simultaneous up-regulation of the healing Th1 response and stimulation of nitric oxide (NO) production from the APCs, and downregulation of the non-healing Th2 response and thereby propose several unique combinations of protein molecules that could elicit this anti-Leishmania immune response. Our results indicate that TLR3 may play a positive role in eliciting NO synthesis, while TLR2 may be responsible for inhibiting an anti-Leishmania immune response. Also, TLR3 overexpression (in the APC), when combined with SHP2 inhibition (in the T cell), produces an anti-Leishmania response that is better than the conventional IFN-gamma or IL12 treatment. A similar anti-Leishmania response is also obtained in another combination where TLR3 (in APC) is overexpressed, and SHC and MKP (of T cell) are inhibited and activated, respectively. Through our study, we also observe that Leishmania infection may induce an upregulation of IFN-beta production from the APC that may lead to an upregulation of the RAP1 and SOCS3 proteins inside the T cell, the potential inhibitors of MAPK and JAK-STAT signaling pathways, respectively, via the TYK2-mediated pathway. This study not only enhances our knowledge in understanding the Th1/Th2 regulatory switch to promote healing response during leishmaniasis but also helps to identify novel combinations of proteins as potential immunomodulators. Electronic supplementary material The online version of this article (doi:10.1186/s13637-015-0032-7) contains supplementary material, which is available to authorized users.

}, doi = {10.1186/s13637-015-0032-7}, author = {Ganguli, Piyali and Choudhury, Saikat and Choudhury, Shomeek and Sarkar, Ram Rup} } @article { ISI:000354472900015, title = {Influence of cultivar, ripeness, blanching, drying, irradiation, and pectin recovery on alk(en)ylresorcinols in mango peels}, journal = {European Food Research and Technology}, volume = {240}, number = {6}, year = {2015}, month = {JUN}, pages = {1235-1245}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The influence of different technological treatments on alk(en)ylresorcinol (AR) contents and pattern in mango peels was evaluated using peels from six different mango cultivars. AR concentrations were shown to highly depend on the cultivar. While high AR concentrations were observed in the analyzed monoembryonic cultivars, AR contents in the polyembryonic cultivar Nam Dokmai were significantly lower. Furthermore, for monoembryonic cultivars, AR levels in the peels of ripe fruits were found to be higher than in unripe ones, while AR levels in cv. Nam Dokmai were independent of the ripeness degree. Convective oven drying resulted in a significant reduction in AR contents when compared to lyophilization. Blanching prior to drying diminished AR yields, thus being unsuitable for satisfactory AR recovery. Gamma irradiation did not significantly affect the AR contents. Since depectinization of mango peels significantly concentrated AR amounts in the depectinized pomace, the consecutive extraction of pectin and ARs allows the dual valorization of mango peels. Considering the treatments investigated, the retention of ARs carrying saturated and unsaturated side chains did not differ under acidic conditions, heating, and irradiation, respectively. Consequently, the 1,3-dihydroxybenzene structure was concluded to be the most labile moiety of the AR molecule.

}, keywords = {Alkylresorcinol, By-products, Monoembryonic, Polyembryonic, Pomace, Ultrasound}, issn = {1438-2377}, doi = {10.1007/s00217-015-2426-x}, author = {Geerkens, Christian Hubert and Miller-Rostek, Petra and Matejka, Anna Elisabeth and Nene, Sanjay and Kammerer, Dietmar Rolf and Carle, Reinhold and Schweiggert, Ralf Martin} } @article { ISI:000361424000014, title = {Insertion copolymerization of difunctional polar vinyl monomers with ethylene}, journal = {ACS Macro Letters}, volume = {4}, number = {9}, year = {2015}, month = {SEP}, pages = {933-937}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A single-step synthesis, structural characterization and application of a neutral, acetonitrile ligated, palladium-phosphinesulfonate complex [{P\<\^\>O}PdMe(L)] (P\<\^\>O = K-2-P,O Ar2PC6H4SO2O with Ar = 2-MeOC6H4; L = CH3CN) (3) in coordination/insertion copolymerization of ethylene with difunctional olefin is investigated. In a significant development, complex 3 was found to catalyze insertion copolymerization of industrially relevant 1,1-disubstituted difunctional vinyl monomers for the first time. Thus, insertion copolymerization of ethyl-2-cyanoacrylate (ECA or super glue) and trifluoromethyl acrylic acid (TFMAA) with ethylene produced the corresponding copolymers with 6.5\% ECA and 3\% TFMAA incorporation. Increasing the concentration of difunctional olefins led to higher incorporation but at the expense of lower activities. These observations indicate that complex 3 tolerates difunctional vinyl monomers and provides direct access to difunctional polyolefins that have not been attempted before.

}, issn = {2161-1653}, doi = {10.1021/acsmacrolett.5b00562}, author = {Gaikwad, Shahaji R. and Deshmukh, Satej S. and Gonnade, Rajesh G. and Rajamohanan, P. R. and Chikkali, Samir H.} } @article { ISI:000347895500008, title = {Investigation of phosphoproteome in RAGE signaling}, journal = {Proteomics}, volume = {15}, number = {2-3, SI}, year = {2015}, month = {JAN}, pages = {245-259}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

The receptor for advanced glycation end products (RAGE) is one of the most important proteins implicated in diabetes, cardiovascular diseases, neurodegenerative diseases, and cancer. It is a pattern recognition receptor by virtue of its ability to interact with multiple ligands, RAGE activates several signal transduction pathways through involvement of various kinases that phosphorylate their respective substrates. Only few substrates have been known to be phosphorylated in response to activation by RAGE (e.g., nuclear factor kappa B); however, it is possible that these kinases can phosphorylate multiple substrates depending upon their expression and localization, leading to altered cellular responses in different cell types and conditions. One such example is, glycogen synthase kinase 3 beta which is known to phosphorylate glycogen synthase, acts downstream to RAGE, and hyperphosphorylates microtubule-associated protein tau causing neuronal damage. Thus, it is important to understand the role of various RAGE-activated kinases and their substrates. Therefore, we have reviewed here the details of RAGE-activated kinases in response to different ligands and their respective phosphoproteome. Furthermore, we discuss the analysis of the data mined for known substrates of these kinases from the PhosphoSitePlus (http://www.phosphosite.org) database, and the role of some of the important substrates involved in cancer, diabetes, cardiovascular diseases, and neurodegenerative diseases. In summary, this review provides information on RAGE-activated kinases and their phosphoproteome, which will be helpful in understanding the possible role of RAGE and its ligands in progression of diseases.

}, keywords = {Cell biology, Disease, Glycation, Kinase, Phosphoproteome, RAGE}, issn = {1615-9853}, doi = {10.1002/pmic.201400169}, author = {Batkulwar, Kedar B. and Bansode, Sneha B. and Patil, Gouri V. and Godbole, Rashmi K. and Kazi, Rubina S. and Chinnathambi, Subashchandrabose and Shanmugam, Dhanasekaran and Kulkarni, Mahesh J.} } @article { ISI:000354378200018, title = {Iron superoxide dismutases in eukaryotic pathogens: new insights from apicomplexa and trypanosoma structures}, journal = {Acta Crystallographica Section F-Structural Biology Communications}, volume = {71}, number = {5, SI}, year = {2015}, month = {MAY}, pages = {615-621}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Prior studies have highlighted the potential of superoxide dismutases as drug targets in eukaryotic pathogens. This report presents the structures of three iron-dependent superoxide dismutases (FeSODs) from Trypanosoma cruzi, Leishmania major and Babesia bovis. Comparison with existing structures from Plasmodium and other trypanosome isoforms shows a very conserved overall fold with subtle differences. In particular, structural data suggest that B. bovis FeSOD may display similar resistance to peroxynitrite-mediated inactivation via an intramolecular electron-transfer pathway as previously described in T. cruzi FeSOD isoform B, thus providing valuable information for structure-based drug design. Furthermore, lysine-acetylation results in T. cruzi indicate that acetylation occurs at a position close to that responsible for the regulation of acetylation-mediated activity in the human enzyme.

}, keywords = {Apicomplexa, iron superoxide dismutase, Trypanosoma}, issn = {1744-3091}, doi = {10.1107/S2053230X15004185}, author = {Phan, Isabelle Q. H. and Davies, Douglas R. and Moretti, Nilmar Silvio and Shanmugam, Dhanasekaran and Cestari, Igor and Anupama, Atashi and Fairman, James W. and Edwards, Thomas E. and Stuart, Kenneth and Schenkman, Sergio and Myler, Peter J.} } @article {42935, title = {Leucas mollissima, a source of bioactive compounds with antimalarial and antimycobacterium activities}, journal = {Planta Medica Letter}, volume = {2}, year = {2015}, month = {JAN}, pages = {e35-e38}, abstract = {

A phytochemical investigation of the acetone extract from the aerial parts of Leucas mollissima afforded one new (-)epi-marmelo lactone, (2 S, 4R, 6 S)-2,6-dimethyl-6 hydroxy-7-ene-4-olide (1), along with five known compounds, schensianol A (2), vanillin (3), β-hydroxy propiovanillone (4), lanost-9(11),25-diene-3β,24β-diol (5), and lanost-9(11),23E(24)-diene-3β,25-diol (6). Similarly, an investigation of the methanol extract of the aerial parts of L. mollissima resulted in the isolation of three known compounds, (+)-syringaresinol (7), anisofolin A (8), and apigenin 7-O-β-D(- 6''-p-E-coumaroyl)-glucoside (9). Structure elucidation of the isolated compounds was carried out using detailed analysis of 1D and 2D nuclear magnetic resonance. All compounds were evaluated for antimalarial activity against Plasmodium falciparum (3D7) and for antimycobacterium activity against Mycobacterium tuberculosis H37Ra and Mycobacterium bovis. Compound 8 was found to have promising antimalarial activity (IC50 4.39 {\textpm} 0.25 {\textmu}M), promising antimycobacterium activity [IC50 4.50 {\textpm} 0.75 {\textmu}M (3.31 {\textmu}g/mL)] against M. tuberculosis H37Ra and at 100 {\textmu}g/mL, showed 55.6 \% inhibition of M. bovis. Compound 9 showed moderate inhibition of P. falciparum growth (35 \% inhibition at 10 {\textmu}M) with respect to the positive control atovaquone and 67.4 \% inhibition against M. bovis at 100 {\textmu}g/mL with respect to the positive control rifampicin.

}, author = {Chinchansure, Ashish A. and Arkile, Manisha A. and Shukla, Anurag and Shanmugam, Dhanasekaran and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000351236300080, title = {Ligand-, base-, co-catalyst-free copper fluorapatite (CuFAP) as a versatile, ecofriendly, heterogeneous and reusable catalyst for an efficient homocoupling of arylboronic acid at ambient reaction conditions}, journal = {RSC Advances}, volume = {5}, number = {31}, year = {2015}, month = {MAR}, pages = {24675-24680}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This paper describes the first report in which copper species containing copper fluorapatite (CuFAP) acts as a versatile, eco-friendly, recyclable, heterogeneous catalyst for an efficient synthesis of symmetric biaryls from the homo-coupling of arylboronic acids in methanol solvent at ambient reaction conditions. The developed protocol is ligand-, base-, and co-catalyst-free, sustainable, mild, inexpensive, and compatible with a wide range of aromatic/heterocyclic boronic acids and provides the corresponding products in excellent yields without purification. The catalyst was easily recovered from the reaction mixture and reused several times without loss of activity.

}, issn = {2046-2069}, doi = {10.1039/c4ra16760k}, author = {Mulla, Shafeek Abdul Rashid and Chavan, Santosh S. and Pathan, Mohsinkhan Y. and Inamdar, Suleman M. and Shaikh, Taufeekaslam M. Y.} } @article { ISI:000356515600001, title = {Long chain branched impact copolymer of polypropylene: microstructure and rheology}, journal = {Polymer Engineering and Science}, volume = {55}, number = {7}, year = {2015}, month = {JUL}, pages = {1463-1474}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

A biphasic impact copolymer of polypropylene (ICP) was modified with peroxide by reactive extrusion process resulting in reduced melt flow index, improved melt strength, and higher die swell. The polymers were for the first time subjected to systematic rheological and microstructural characterization in an effort to understand their structure-property relations. In shear rheological tests, the modified ICP displayed higher flow activation energy, reduced values of loss tangent and nearly equal frequency dependence of storage and loss modulli. The modified ICP also showed strain hardening behaviour in uniaxial extensional rheology and higher crystallization temperature in differential scanning calorimetry (DSC). All these are definitive indications of the presence of long chain branches (LCB). Fitting the rheological data of modified ICPs with the eXtended Pom Pom (XPP) model indicated the presence of LCB on the higher molecular weight fraction in the polymer, a result which was corroborated with multi-detector high temperature gel permeation chromatography (HT-GPC). More importantly, the matrix and rubber phases of the ICP were separately characterized for presence of long chain branching by rheology, DSC and HT-GPC. The results indicate that while LCB existed in the matrix phase, microgels were present in both phases indicating that the reaction with peroxide occurred in both phases. POLYM. ENG. SCI., 55:1463-1474, 2015. (c) 2014 Society of Plastics Engineers

}, issn = {0032-3888}, doi = {10.1002/pen.23993}, author = {Chikhalikar, Kalyani and Deshpande, Anushree and Pol, Harshawardhan and Dhoble, Deepa Arun and Jha, Saroj and Jadhav, Kishor and Mahajan, Sunil and Ahmad, Zubair and Kulkarni, Surendra and Gupta, Surendra and Lele, Ashish K.} } @article { ISI:000355656000013, title = {Low-temperature sintering and microwave dielectric properties of Zn2SiO4 ceramic added with crystalline zinc borate}, journal = {Journal of Electronic Materials}, volume = {44}, number = {7}, year = {2015}, month = {JUL}, pages = {2312-2320}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The physical and dielectric properties of composites of known microwave materials, Zn2SiO4 and Zn3B2O6, prepared by solid-state reaction, were investigated with the purpose of developing a low-loss dielectric material for low-temperature co-fired ceramic applications. An off-stoichiometric phase of Zn2SiO4 with extra SiO2 was used to avoid the occurrence of unreacted ZnO. During sintering, zinc borate was found to partially react with residual SiO2 to form Zn2SiO4. The residual zinc borate was converted to a boron-rich glassy phase which helped to reduce the sintering temperature of the composite. Good relative sintering density (\> 90\%) at temperatures below the melting temperature of zinc borate is indicative of a sintering mechanism of diffusion-based mass transfer. Composites containing 15 wt.\% zinc borate, 2.5 wt.\% lithium carbonate and 20 wt.\% zinc borate in zinc silicate had dielectric constants of 6.8 and 6.1, quality factors (Qxf) of 48,800 and 94,300 GHz when sintered at 900A degrees C and 950A degrees C, respectively. These quality factor results are close to the best values reported for zinc silicate at these sintering temperatures.

}, keywords = {dielectric constant, LTCC, quality factor, sintering density, zinc borate, zinc silicate}, issn = {0361-5235}, doi = {10.1007/s11664-015-3762-0}, author = {Chaware, Varsha and Deshmukh, Ravindra and Sarode, Chetan and Gokhale, Suresh and Phatak, Girish} } @article { ISI:000355702900052, title = {Mesoporous TUD-1 supported indium oxide nanoparticles for epoxidation of styrene using molecular O-2}, journal = {RSC Advances}, volume = {5}, number = {58}, year = {2015}, month = {MAY}, pages = {46850-46860}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Activation of molecular O-2 by metal or metal oxide nanoparticles is an area of recent research interest. In this work, for the first time, we report that indium oxide nanoparticles of \<3 nm size dispersed on mesoporous silica (TUD-1) can activate molecular O-2 and produce styrene epoxide with a selectivity of 60\% and styrene conversion around 25\% under mild conditions. It is found that neither indium oxide nor TUD-1 themselves respond to the styrene epoxidation reaction. The computational studies provide evidence that an oxygen molecule is highly polarized when it is located near the interface of both surfaces. The kinetic study shows that the reaction is of pseudo-first order and that the activation energy for styrene conversion is 12.138 kJ mol(-1). The catalysts are recyclable for up to four regeneration steps, with the styrene conversion and styrene epoxide selectivity almost unchanged.

}, issn = {2046-2069}, doi = {10.1039/c5ra03400k}, author = {Rahman, Sumbul and Farooqui, Saleem A. and Rai, Aditya and Kumar, Rawesh and Santra, Chiranjit and Prabhakaran, Vinod C. and Bhadu, Gopala Ram and Sen, Debasis and Mazumder, S. and Maity, Sudip and Sinha, Anil K. and Chowdhury, Biswajit} } @article { ISI:000350222400033, title = {Microwave and hydrothermal syntheses of WSe2 micro/nanorods and their application in supercapacitors}, journal = {RSC Advances}, volume = {5}, number = {28}, year = {2015}, month = {FEB}, pages = {21700-21709}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

WSe2 micro/nanorods were synthesized using one step microwave and hydrothermal methods. The as synthesized micro/nanorod samples of WSe2 were characterized using various characterization techniques such as SEM, TEM, Raman spectroscopy, X-ray diffraction, UV-visible and PL spectroscopy. The as synthesized samples were also tested for their applicability to use as cathode materials for supercapacitor applications. The WSe2 samples prepared by the microwave and hydrothermal methods (with use of tungstic acid as precursor) show noteworthy performance towards supercapacitor application. Our work opens a new avenue to use these simple methods to prepare various morphologies of inorganic nanomaterials and utilize them for various energy and nanoelectronics applications.

}, issn = {2046-2069}, doi = {10.1039/c4ra12599a}, author = {Chakravarty, Disha and Late, Dattatray J.} } @article { ISI:000351435100014, title = {Microwave-assisted synthesis of few-layered TaTe2 and its application as supercapacitor}, journal = {European Journal of Inorganic Chemistry}, number = {9}, year = {2015}, month = {MAR}, pages = {1598-1603}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

We report a simple and rapid microwave-assisted synthesis of tantalum telluride (TaTe2) nanosheets. The ratio of tantalum pentachloride (TaCl5) and elemental tellurium (Te) powder were adjusted in the presence of NaBH4 in such a way as to obtain the TaTe2 nanosheet. The samples were characterized by various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), UV/Vis spectroscopy, photoluminescence (PL) spectroscopy, and XRD. Our SEM, TEM, and AFM results show the formation of sheet-like morphology, while the XRD data confirms the high crystalline quality and stable phase of the TaTe2 formed. The supercapacitor cells were fabricated by using TaTe2 nanosheets as anode material, platinum metal wire as a counterelectrode, and Ag/AgCl as reference electrode. The calculated coulombic efficiency is more than 95\%, while the cycle-to-cycle decrease in capacity is less than 5\%. The maximum discharge or charging capacity is below 2.4 Wh/kg, which is an ideal characteristic for achieving supercapacitor behavior.

}, keywords = {Microwave chemistry, Nanostructures, Supercapacitors, Tantalum, Tellurium}, issn = {1434-1948}, doi = {10.1002/ejic.201403220}, author = {Chakravarty, Disha and Kumar, Praveen and Ugale, Vaishali S. and Late, Dattatray J.} } @article { ISI:000358627400006, title = {Molecular dynamics simulations of GPCR-cholesterol interaction: an emerging paradigm}, journal = {Biochimica Et Biophysica Acta-Biomembranes}, volume = {1848}, number = {9, SI}, year = {2015}, month = {SEP}, pages = {1775-1782}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

G protein-coupled receptors (GPCRs) are the largest class of molecules involved in signal transduction across cell membranes and represent major targets in the development of novel drug candidates. Membrane cholesterol plays an important role in GPCR structure and function. Molecular dynamics simulations have been successful in exploring the effect of cholesterol on the receptor and a general consensus molecular view is emerging. We review here recent molecular dynamics studies at multiple resolutions highlighting the main features of cholesterol-GPCR interaction. Several cholesterol interaction sites have been identified on the receptor that are reminiscent of nonannular sites. These cholesterol hot-spots are highly dynamic and have a microsecond time scale of exchange with the bulk lipids. A few consensus sites (such as the CRAC site) have been identified that correspond to higher cholesterol interaction. Interestingly, high plasticity is observed in the modes of cholesterol interaction and several sites have been suggested to have high cholesterol occupancy. We therefore believe that these cholesterol hot-spots are indicative of {\textquoteleft}high occupancy sites{\textquoteright} rather than {\textquoteleft}binding sites{\textquoteright}. The results suggest that the energy landscape of cholesterol association with GPCRs corresponds to a series of shallow minima interconnected by low barriers. These specific interactions, along with general membrane effects, have been observed to modulate GPCR organization. Membrane cholesterol effects on receptor structure and organization, that in turn influences receptor cross-talk and drug efficacy, represent a new frontier in GPCR research. This article is part of a Special Issue entitled: Lipid-protein interactions. Guest Editors: Amitabha Chattopadhyay and jean-Marie Ruysschaert. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {Coarse-grain simulation, CRAC, GPCR, Lipid-receptor interaction, Membrane cholesterol, Receptor dimerization}, issn = {0005-2736}, doi = {10.1016/j.bbamem.2015.03.018}, author = {Sengupta, Durba and Chattopadhyay, Amitabha} } @article { ISI:000361559700081, title = {N-(3-Aminoalkyl)proline derivatives with potent antigycation activity}, journal = {RSC Advances}, volume = {5}, number = {94}, year = {2015}, month = {SEP}, pages = {77332-77340}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The importance of amino acids in the therapy of conditions such as renal failure, neurological disorders and congenital defects has been documented. Some amino acids such as lysine and glycine have also been reported to have antiglycating activity. Herein we report the synthesis of a new series of N-(3-aminoalkyl)proline derivatives which are non-natural in nature. The compounds were unambiguously characterized by NMR, mass and IR spectroscopy. Their in vitro antiglycation activity was studied by circular dichroism and fluorescence spectrometry. The mechanism of action was also studied and found to take place by inhibition of Amadori product formation. The inhibition of AGE formation was further confirmed by western blot and LC-MS/MS analyses and the IC50 values of the potent compounds were determined. Compounds containing hydroxyl substituents at C4 were found to have superior antiglycation properties than those containing azide substituents at the same position. The compounds were additionally found to possess good anti-oxidant properties, which could lead to further reduction in AGE formation. Moreover, the title compounds were found to have low cytotoxicity in mammalian cells, another important attribute. Thus, the title compounds represent a novel promising class of antiglycating agents.

}, issn = {2046-2069}, doi = {10.1039/c5ra12148e}, author = {Chilukuri, Harsha and Kolekar, Yogesh M. and Bhosle, Govind S. and Godbole, Rashmi K. and Kazi, Rubina S. and Kulkarni, Mahesh J. and Fernandes, Moneesha} } @article { ISI:000361532500003, title = {New butenolide cinnamate and other biological active chemical constituents from Polygonum glabrum}, journal = {Natural Product Research}, volume = {29}, number = {22}, year = {2015}, month = {NOV}, pages = {2080-2086}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Phytochemical investigation of the methanol extract of the aerial parts of Polygonum glabrum afforded one new natural product (-)-2-methoxy-2-butenolide-3-cinnamate (1) along with six known compounds, -hydroxyfriedalanol (2), 3-hydroxy-5-methoxystilbene (3), (-) pinocembrin (4), sitosterol-(6-O-palmitoyl)-3-O{\textendash}d-glucopyranoside (5), (-) pinocembrin-5-methyl ether (6) and sitosterol-3-O{\textendash}d-glucopyranoside (7). Compound 1 showed promising in vitro anti-HIV-1 activity against primary isolates HIV-1(UG070) (X4, subtype D) and HIV-1(VB59) (R5, subtype C) assayed using TZM-bl cell line with IC50 in the range of 15.68-22.43g/mL. The extract showed TI in the range of 19.19-27.37 with IC50 in the range of 10.90-15.55g/mL. Compounds 1, 3 and 4 exhibited in vitro anti-mycobacterium activity against Mycobacterium tuberculosis H37Ra with IC50 values of 1.43, 3.33 and 1.11g/mL in dormant phase and 2.27, 3.33 and 1.21g/mL in active phase, respectively. Compound 4 was found to be the most active antiproliferative with IC50 values of 1.88-11.00g/mL against THP-1, A549, Panc-1, HeLa and MCF7 cell lines.

}, keywords = {anti-HIV-1, anti-mycobacterium, antiproliferative, phytochemicals, Polygonaceae, Polygonum glabrum}, issn = {1478-6419}, doi = {10.1080/14786419.2015.1004674}, author = {Said, Madhukar S. and Chinchansure, Ashish A. and Nawale, Laxman and Durge, Ankita and Wadhwani, Ashish and Kulkarni, Smita S. and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000360658000003, title = {New imaging reagents for lipid dense regions in live cells and the nucleus in fixed MCF-7 cells}, journal = {Journal of Materials Chemistry B}, volume = {3}, number = {36}, year = {2015}, month = {AUG}, pages = {7177-7185}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two new uracil (U) and 5-flurouracil (5-FU) labeled ruthenium(II)-polypyridyl based cellular imaging reagents are reported. Confocal laser scanning microscopic images with live and paraformaldehyde (PFA) fixed MCF-7 cells are examined using these two low-cytotoxic reagents. Experimental results show that these two complexes, appropriately functionalized with U (1) and 5-FU (2), have specific affinity for the lipid dense regions like the endoplasmic reticulum, cell membrane, and cytoplasmic vacuoles in live MCF-7 cells, and dye internalization in these regions happened following an endocytosis pathway. Interestingly, these two complexes are found to be localized in the nucleus of the PFA fixed cells. For fixed cells, presumably the lipid layer disruption helped in the explicit localization of the complexes 1 and 2 in the cell nucleus through specific interaction with cellular DNA. Poor and non-specific internalization of an analogous model complex 3, without having a U or 5-FU moiety, reveals the definite influence of U or 5-FU as well as the role of lipophilicity of the respective complex 1 and 2 in the cellular internalization process. Apart from these, a large Stokes shift (similar to 160 nm) and an appreciably long lived (MLCT)-M-3 excited state (similar to 320 ns) in aq. buffer medium (pH 7.4) are other key features for complexes 1 and 2. Unlike the common nuclear DNA staining reagents like DAPI, these low-cytotoxic reagents are found to be highly stable towards photo-bleaching upon irradiation with 455 nm at the MLCT band for these complexes.

}, issn = {2050-750X}, doi = {10.1039/c5tb01309g}, author = {Ramu, Vadde and Ali, Firoj and Taye, Nandaraj and Garai, Bikash and Alam, Aftab and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000349325400040, title = {New turn on Pd2+-specific fluorescence probe and its use as an imaging reagent for cellular uptake in Hct116 cells}, journal = {Chemical Communications}, volume = {51}, number = {17}, year = {2015}, month = {JAN}, pages = {3649-3652}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new coumarin-rhodamine conjugate is used as a specific probe for Pd2+ ions and this could even delineate Pd(II) from Pd(0) or Pd(IV) in aqueous buffer medium (pH similar to 7). Laser confocal microscopic studies reveal that efficient cellular internalization of this reagent helps in imaging the cellular uptake of Pd2+ as low as 0.1 ppm in Hct 116 cells. This reagent could even be used for estimation of Pd2+ in human urine samples.

}, issn = {1359-7345}, doi = {10.1039/c4cc10171e}, author = {Reddy, Upendar G. and Ali, Firoj and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article {45937, title = {Nioella nitratireducens gen. nov., sp nov., a novel member of the family Rhodobacteraceae isolated from Azorean Island}, journal = {Antonie Van Leeuwenhoek International Journal of General and Molecular Microbiology}, volume = {107}, year = {2015}, month = {FEB}, pages = {589-595}, type = {Article}, abstract = {

A novel Gram-negative, non-spore forming, rod-shaped aerobic bacterium, designated SSW136(T), was isolated from a surface seawater sample collected at Espalamaca (in Faial Island), Azores. Growth was found to occur from 10 to 37 A degrees C, pH 6.0-8.0, and with 2-11 \% of NaCl. 16S rRNA gene sequence indicated that the strain SSW136(T) belongs to the family Rhodobacteraceae. Strain SSW136(T) exhibited 96.3, 95.9, 95.7 and 95.5 sequence similarity to the type strains Oceanicola litoreus M-M22(T), Roseovarius aestuarii SMK-122(T), Marivita geojedonensis DPG-138(T), and Pseudoruegeria aquimaris SW-255(T) respectively. Neighbour-joining and maximum-parsimony phylogenetic trees based on 16S rRNA gene sequences revealed that strain SSW136(T) was affiliated to the family Rhodobacteraceae and formed a separate branch. The G+C content was 63.5 mol\%. The major respiratory quinone was found to be Q-10. The polar lipids of strain SSW136(T) consisted of phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, two unidentified aminolipids and three unidentified phospholipids. The major fatty acids were C-18:1 omega 7c (46.5 \%), Cyclo-C-19:0 omega 8c (16.0 \%) and C-16:0 (12.8 \%). On the basis of the morphological, genotypic, chemotaxonomic characteristics and low DNA-DNA relatedness, strain SSW136(T) is proposed to represent a novel genus and novel species, Nioella nitratireducens gen. nov., sp. nov., in the family Rhodobacteraceae. The type strain is SSW136(T) (=KCTC 32417(T) = NCIM 5499(T)).

}, keywords = {Espalamaca, Nioella nitratireducens, Novel genus and species, Polyphasic taxonomy, Seawater}, issn = {0003-6072}, doi = {10.1007/s10482-014-0355-5}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Yoon, Jung-Hoon and Dastager, Syed Gulam and Liu, Qing and Khieu, Thi-Nhan and Son, Chu Ky and Li, Wen-Jun and Colaco, Ana} } @article { ISI:000362436800028, title = {Novel one-pot multi-component synthesis of 3,3 {\textquoteleft}-disubstituted oxindole and spirooxindole scaffolds via Sn-catalyzed C(sp(3))-H functionalization of azaarenes by sequential Knoevenagel-Michael-cyclization reaction}, journal = {RSC Advances}, volume = {5}, number = {99}, year = {2015}, month = {SEP}, pages = {81103-81107}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Sn-catalyzed C(sp(3))-H bond functionalization of 2-methyl azaarenes/2-(azaaryl)methanes has been achieved for the first time in a one-pot multi-component reaction with isatin and active methylene compounds via tandem sequential Knoevenagel-Michael-intramolecular C-N cyclization. This strategy provides new cost-effective access to potent and biologically/medicinally important spirooxindoles/3,3{\textquoteright}-disubstituted 2-oxindoles in good to excellent yields.

}, issn = {2046-2069}, doi = {10.1039/c5ra16334j}, author = {Chavan, Santosh S. and Pathan, Mohsinkhan Y. and Thorat, Shridhar H. and Gonnade, Rajesh G. and Mulla, Shafeek Abdul Rashid} } @article { ISI:000349934600077, title = {Organocatalytic enantioselective direct vinylogous michael addition of alpha,beta-unsaturated gamma-butyrolactam to beta-acyl acrylates and 1,2-diacylethylenes}, journal = {Journal of Organic Chemistry}, volume = {80}, number = {3}, year = {2015}, month = {FEB}, pages = {1985-1992}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A highly efficient Michael addition of alpha,beta-unsaturated gamma-butyrolactam to various beta-acyl acrylates and ene-diones to provide synthetically useful compounds was developed. The products were obtained with high diastereo- and enantioselectivities (up to \>25:1 dr and 99\% ee) containing adjacent tertiary stereocenters.

}, issn = {0022-3263}, doi = {10.1021/jo5027047}, author = {Chen, Yi-Ru and Das, Utpal and Liu, Meng-Hsien and Lin, Wenwei} } @article {42916, title = {Perspective on atomically thin 2d inorganic layered materials for biosensor}, journal = {Journal of Nanomedicine Research}, volume = {2}, year = {2015}, month = {JAN}, author = {Late, Dattatray J. and Rout, C. S. and Chakravarty, Disha and Ratha, S.} } @article { ISI:000365205000004, title = {Pore surface engineering in porous, chemically stable covalent organic frameworks for water adsorption}, journal = {Journal of Materials Chemistry A}, volume = {3}, number = {47}, year = {2015}, month = {NOV}, pages = {23664-23669}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Herein, we have explored the possibility of a class of covalent organic frameworks (COFs) as water adsorbing materials. We have selected, synthesized 12 chemically stable functionalized Schiff base COFs and thoroughly studied their water uptake behaviour. Further, a deep understanding was developed with these COFs towards the effects of condensation pressure of water and hydrophilic/hydrophobic groups present in the COF pores on water absorption capacity and ultimately, their recyclability. Among all reported COFs, TpPa-1 shows the highest water uptake of 30 wt\% (368 cm(3) g(-1); 17 mmol g(-1)) at P/P-0 = 0.3, which is also comparable with the recently reported carbon materials and few well known MOFs. This study also reveals that the overall water uptake of COFs can be tuned systematically based on chemical functionality and pore size in a wider window of relative pressures.

}, issn = {2050-7488}, doi = {10.1039/c5ta07998e}, author = {Biswal, Bishnu P. and Kandambeth, Sharath and Chandra, Suman and Shinde, Digambar Balaji and Bera, Saibal and Karak, Suvendu and Garai, Bikash and Kharul, Ulhas K. and Banerjee, Rahul} } @article { ISI:000362436800013, title = {Pt-nanoparticle functionalized carbon nano-onions for ultra-high energy supercapacitors and enhanced field emission behaviour}, journal = {RSC Advances}, volume = {5}, number = {99}, year = {2015}, month = {SEP}, pages = {80990-80997}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

In the present work, we have investigated the charge storage capacitive response and field emission behaviour of platinum (Pt) nanoparticles decorated on carbon nano onions (CNOs) and compared them with those of pristine carbon nano onions. The specific capacitance observed for Pt-CNOs is 342.5 F g(-1), about six times higher than that of pristine CNOs, at a scan rate of 100 mV s(-1). The decoration with Pt nanoparticles, without any binder or polymer separator on the CNO, leading to enhanced supercapacitance is due to easy accessibility of Na2SO4 electrolyte in the active material. The Density Functional Theory (DFT) calculations of these systems reveal enhancement in the Density of States (DOS) near the Fermi energy (E-F) on account of platinum decoration on the CNOs. Furthermore, the field emission current density of similar to 0.63 mA cm(-2) has been achieved from the Pt-CNOs emitter at an applied electric field of similar to 4.5 V mu m(-1) and from the pristine CNOs sample current density of similar to 0.4 mA cm(-2) has been achieved at an applied electric field of similar to 6.6 V mu m(-1). The observed enhanced field emission behavior has been attributed to the improved electrical conductivity and increased emitting sites of the Pt-CNO emitter. The field emission current stability of the Pt-CNO emitter over a longer duration is found to be good. The observed results imply multifunctional potential of Pt-CNOs, as supercapacitor material in various next generation hybrid energy storage devices, and field emitters for next generation vacuum nano/microelectronic devices.

}, issn = {2046-2069}, doi = {10.1039/c5ra12364j}, author = {Suryawanshi, Sachin R. and Kaware, Vaibhav and Chakravarty, Disha and Walke, Pravin S. and More, Mahendra A. and Joshi, Kavita and Rout, Chandra Sekhar and Late, Dattatray J.} } @article { ISI:000351325200008, title = {Pyrazine-based organometallic complex: synthesis, characterization, and supramolecular chemistry}, journal = {Inorganic Chemistry}, volume = {54}, number = {6}, year = {2015}, month = {MAR}, pages = {2543-2550}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The design, synthesis, and characterization of a new pyrazine-based ditopic platinum(II) organometallic complex are reported. The molecular structure of the organoplatinum pyrazine dipod was determined by single-crystal X-ray crystallography. The potential utility of this organometallic ditopic acceptor as a building block in the construction of neutral metallasupramolecular macrocycles containing the pyrazine motif was explored. Pyrazine motifs containing supramolecules were characterized by multinuclear NMR (including H-1 DOSY), mass spectrometry, and elemental analysis. The geometry of each supramolecular framework was optimized by employing the PM6 semi-empirical molecular orbital method to predict its shape and size. The ability of the pyrazine-based organoplatinum complex to act as a host for nitroaromatic guest (2,4-dinitrotoluene and PA) molecules was explored by isothermal titration calorimetry (ITC). The binding stoichiometry and thermodynamic parameters of these host guest complexation reactions were evaluated using ITC. Theoretical calculations were performed to obtain insight into the binding pattern between the organometallic host and nitroaromatic guests. The preferable binding propensity of the binding sites of complex 1 for both nitroaromatics (PA and 2,4-dinitrotoluene) determined by molecular simulation studies corroborates well with the experimental results as obtained by ITC experiments.

}, issn = {0020-1669}, doi = {10.1021/ic502581x}, author = {Bhowmick, Sourav and Chakraborty, Sourav and Das, Atanu and Rajamohanan, P. R. and Das, Neeladri} } @article { ISI:000352508300032, title = {Reactivity and operational stability of N-Tailed TAMLs through kinetic studies of the catalyzed oxidation of orange II by H2O2: synthesis and x-ray structure of an N-Phenyl TAML}, journal = {Chemistry A-European Journal}, volume = {21}, number = {16}, year = {2015}, month = {APR}, pages = {6226-6233}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

{The catalytic activity of the N-tailed (biuret) TAML (tetraamido macrocyclic ligand) activators [Fe{4-XC6H3-1,2-(NCOCMe2NCO)(2)NR}Cl](2-) (3; N atoms in boldface are coordinated to the central iron atom; the same nomenclature is used in for compounds 1 and 2 below), [X

}, keywords = {Hydrogen peroxide, iron, kinetics, Oxidation, reaction mechanisms}, issn = {0947-6539}, doi = {10.1002/chem.201406061}, author = {Warner, Genoa R. and Mills, Matthew R. and Enslin, Clarissa and Pattanayak, Shantanu and Panda, Chakadola and Panda, Tamas Kumar and Sen Gupta, Sayam and Ryabov, Alexander D. and Collins, Terrence J.} } @article { ISI:000363167900028, title = {Reagent for specific recognition of cysteine in aqueous buffer and in natural milk: imaging studies, enzymatic reaction and analysis of whey protein}, journal = {Chemical Communications}, volume = {51}, number = {85}, year = {2015}, month = {AUG}, pages = {15592-15595}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report a new chemodosimetric probe (L) for specific recognition of cysteine (Cys) in aqueous buffer and in whey protein isolated from fresh cow{\textquoteright}s milk. Using this reagent we could develop a luminescence-based methodology for estimation of Cys released from a commercially available Cys-supplement drug by aminoacylase-1 in live cells.

}, issn = {1359-7345}, doi = {10.1039/c5cc04876a}, author = {Anila, H. A. and Reddy, Upendar G. and Ali, Firoj and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000352791300086, title = {Recent development of plant products with anti-glycation activity: a review}, journal = {RSC Advances}, volume = {5}, number = {39}, year = {2015}, month = {MAR}, pages = {31113-31138}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Diabetes mellitus (DM) is an endocrine disorder characterized by chronic hyperglycemia, which results from an absolute or a relative deficiency of insulin or resistance to insulin. Hyperglycemia is increasingly linked to the pathogenesis of diabetic complications in individuals with long-duration diabetes. One of the inevitable consequences of hyperglycemia is the enhanced accumulation of advanced glycation end-products (AGEs), which are implicated in the pathogenesis of diabetes. Various natural products and their active constituents have reportedly been used for the treatment of diabetes and its complications. Some of these molecules are known to have anti-glycation activity. The search for novel anti-glycation agents from various sources is gaining a lot of importance. Attention has especially been focused on plants with an ethnopharmacological background and also on plants rich in triterpenoids and phenolics, which generally exhibit antioxidant and anti-glycation effects. Plant extracts or compounds obtained from them that possess both antioxidant and anti-glycation activities might have great therapeutic potential for treating diabetic complications. This review highlights the anti-glycation activities of phytochemicals, which will aid in the identification of lead molecules for the development of new anti-glycation drugs.

}, issn = {2046-2069}, doi = {10.1039/c4ra14211j}, author = {Chinchansure, Ashish A. and Korwar, Arvind M. and Kulkarni, Mahesh J. and Joshi, Swati P.} } @article { ISI:000357617800013, title = {Reduced graphene oxide composite with oxidizable manganese/cobalt mixed oxide for p-cresol oxidation by using molecular oxygen}, journal = {ChemPlusChem}, volume = {80}, number = {7}, year = {2015}, month = {JUL}, pages = {1164-1169}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A composite of graphene oxide (GO) with mixed oxide (MnCo) was prepared by using a solvothermal method. During the synthesis, both the reduction of GO and growth of metal oxides took place simultaneously. The as-prepared composite material was highly selective for the liquid-phase oxidation of p-cresol to form p-hydroxybenzaldehyde in 71\% yield within 1h. The composite material was characterised by SEM, X-ray photoelectron spectroscopy, high-resolution TEM and cyclic voltammetry (CV). A CV study revealed that the increase in the redox potential of the mixed oxide after being supported on GO, led to its higher activity of the catalyst for the oxidation reaction. The stability of the catalyst under the reaction conditions was studied by its successful reuse in three cycles.

}, keywords = {cyclic voltammetry, graphene, Oxidation, supported catalysts, transition metals}, issn = {2192-6506}, doi = {10.1002/cplu.201500053}, author = {Jha, Ajay and Patil, Sagar H. and Solanki, Bhanu P. and Ribeiro, Ana P. C. and Castro, Carlos A. N. and Patil, Kashinath R. and Coronas, Alberto and Rode, Chandrashekhar V.} } @article { ISI:000350685400013, title = {Renewable fuels from biomass-derived compounds: Ru-containing hydrotalcites as catalysts for conversion of HMF to 2,5-dimethylfuran}, journal = {Catalysis Science \& Technology}, volume = {5}, number = {3}, year = {2015}, month = {MAR}, pages = {1463-1472}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Production of transportation fuels from renewable biomass is hugely important considering the current ecological concerns over CO2 built up in the atmosphere. Ruthenium-containing hydrotalcite (HT) catalysts were applied for the selective hydrogenolysis of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF). Structural and morphological features of the catalysts were examined using various physico-chemical characterization techniques. The influence of various reaction parameters, such as reaction temperature, solvent, Ru content of the catalyst, etc., was investigated with respect to HMF conversion and DMF yield. The study clearly shows that well-dispersed Ru nanoparticles are highly active and selective in the conversion of HMF to DMF. A catalyst containing only 0.56 wt\% Ru converted 100 mol\% HMF to yield 58 mol\% DMF. This catalyst was found to be recyclable as the activity was retained even after five cycles of reaction. 2-Propanol was found to be a good solvent as it helped to improve DMF yield through transfer hydrogenation. Based on the results of the investigations, a reaction pathway for the conversion of HMF to DMF was proposed for the present Ru-based catalyst system.

}, issn = {2044-4753}, doi = {10.1039/c4cy01376j}, author = {Nagpure, Atul S. and Venugopal, Ashok Kumar and Lucas, Nishita and Manikandan, Marimuthu and Thirumalaiswamy, Raja and Chilukuri, Satyanarayana V.} } @article { ISI:000356305300034, title = {Rhodium complex with unsymmetrical vicinal diamine ligand: excellent catalyst for asymmetric transfer hydrogenation of ketones}, journal = {RSC Advances}, volume = {5}, number = {64}, year = {2015}, month = {JUN}, pages = {51722-51729}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

New unsymmetrical vicinal diamine ligands with systematic variation in the regio and stereo positions in the amine and sulphonamide groups were synthesized from cheap starting material such as norephedrine. Catalytic Asymmetric Transfer Hydrogenation (ATH) of aromatic alkyl ketones has been investigated using transition metal complexes and new derivatives of monotosylated unsymmetrical vicinal diamine ligands using sodium formate as the hydrogen source, in water and methanol. Chiral secondary alcohols were obtained with excellent enantioselectivity (\>95\% ee) and conversion of ketones (\>95\%) with [Rh(Cp*)Cl-2](2) and ligand 4 as a catalyst. Enantioselectivity was found to be slightly higher with the use of methanol as a solvent for ATH of ketones with sodium formate as the hydrogen source compared to water as a solvent and was found to be consistent with all the ketones investigated. The reaction mixture is homogeneous in methanol unlike in water, where substrate and product are insoluble in water and form separate phase, sodium formate being soluble in water. The activity and enantioselectivity obtained for ATH of ketones using [Rh(Cp*)Cl-2](2) and unsymmetrical vicinal diamine ligand as catalyst was comparable with the C2 symmetric benchmark ligands like TsDPEN ((1R, 2R)-N-(p-tolylsulfonyl)-1,2-diphenylethylene- diamine), and TsCYDN ((1R, 2R)-N-(p-tolylsulfonyl)-1,2-cyclohexyl, diamine) under similar reaction conditions. To the best of our knowledge, this is first example of the ATH of ketones with good activity and high enantioselectivity with [Rh(Cp*)Cl-2](2) and unsymmetrical vicinal diamine ligands as catalyst systems.

}, issn = {2046-2069}, doi = {10.1039/c5ra08220j}, author = {Deshpande, Sudhindra H. and Shende, Vaishali S. and Shingote, Savita K. and Chakravarty, Debamitra K. and Puranik, Vedavati G. and Chaudhari, Raghunath V. and Kelkar, Ashutosh A.} } @article { ISI:000358395100008, title = {Role of interfacial tension of solvating diluents and hydrophilic-hydrophobic cross-linkers in hyper-cross-linked solid supports}, journal = {Industrial \& Engineering Chemistry Research}, volume = {54}, number = {27}, year = {2015}, month = {JUL}, pages = {6893-6901}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The properties of a hyper-cross-linked solid support are the outcome Of the interfacial tension created by solvating/nonsolvating diluents, the hydrophilicity/hydrophobicity of the cross-linkers, and their concentrations. Interestingly, a More hydrophobic diluent and cross-linker as well as a higher concentration of cross-linker-containing copolymer revealed an increase In surface area. A high surface area and low cross-link density (CLD) polymer illustrated higher epoxy content. Importantly, maximum surface area (533 m(2)/g) Was obtained at high CLD; inversely, epoxy,content (1.83 mmol/g) was higher at low CLD polymer. Notably, greater rigidity of cross-linker and its higher concentration increased T-max and T-g; contrarily, greater flexibility of cross-linker and its concentration attenuated T-max and T-g. Thermal study demonstrated the thermostability (300 degrees C) and polymer safe temperature (220 degrees C). Indeed, a lower solubility parameter difference between polymer and swelling solvent produces a higher polymer-solvent interaction parameter, resulting in increased polymer swelling. Polymers with high surface area and low CLD demonstrated greater swelling behavior.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.5b01277}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @inbook { ISI:000350416600017, title = {Role of lipid-mediated effects in beta(2)-adrenergic receptor dimerization}, booktitle = {biochemical roles of eukaryotic cell surface macromolecules}, series = {Advances in Experimental Medicine and Biology}, volume = {842}, year = {2015}, pages = {247-261}, publisher = {Springer-Verlag Berlin}, organization = {Springer-Verlag Berlin}, address = {Heidelberger Platz 3, D-14197 Berlin, Germany :}, isbn = {978-3-319-11280-0; 978-3-319-11279-4}, issn = {0065-2598}, doi = {10.1007/978-3-319-11280-0_16}, author = {Prasanna, Xavier and Chattopadhyay, Amitabha and Sengupta, Durba}, editor = {Chakrabarti, A. and Surolia, A.} } @article { ISI:000355985200027, title = {Role of the molecular structure of carboxylate-alumoxanes in the enhanced nucleation of polypropylene}, journal = {Chemical Communications}, volume = {51}, number = {49}, year = {2015}, month = {MAY}, pages = {10026-10029}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We have reported the use of carboxylate-alumoxanes as efficient nucleating agents for isotactic polypropylene (iPP) with a possible structural correlation to the nucleation efficiency. The unique, butterfly-like structure of carboxylate-alumoxanes correlates well with the nucleation characteristics of iPP and, for the first time, the impact of a thermally induced, crystalline transition of carboxylate-alumoxanes, which alters neither the structural conformation nor the nucleation efficiency of the transformed material, is demonstrated.

}, issn = {1359-7345}, doi = {10.1039/c5cc01327e}, author = {Mani, Mohan Raj and Chellaswamy, Ramesh and Marathe, Yogesh N. and Pillai, Vijayamohanan K.} } @article {42984, title = {Rottlerin derivatives and other compounds from mallotus philippinensis fruits and their potential antimycobactrial activity}, journal = {Planta Medica Letters}, volume = {2}, year = {2015}, month = {JUN}, pages = {e28-e30}, abstract = {

The methanolic extract of the fruits of Mallotus philippinensis afforded 13 compounds, 7,11-diketo-lanost-3-ol (1, as acetate), lanosta-8-ene-3β-ol (2, as acetate), pregnenolone (3, as acetate), trans-chalcone (4), kamalachalcone E (5), oleanolic acid (6), gallic acid (7), kaempferol (8), myricetin (9), 1-(5,7-dihydroxy-2,2,6-trimethyl-2 H-1-benzopyran-8-yl)-3-phenyl-2-propen-1-one (10), 4'-hydroxyisorottlerin (11), rottlerin (12), and shikimic acid (13). Compound 1 was isolated as a new natural product and its structure was elucidated by 1D and 2D nuclear magnetic resonance analyses including heteronuclear single quantum correlation, heteronuclear multiple-bond correlation, correlation spectroscopy, and nuclear Overhauser effect spectroscopy experiments. All of the isolated compounds were evaluated for their antimycobacterium activity against Mycobacterium tuberculosis H37Ra. Compounds 11 and 12 exhibited promising inhibitory activity with IC50 values of 0.89 {\textpm} 0.33 {\textmu}g/mL (MIC 2.06 {\textpm} 0.41 {\textmu}g/mL) and 7.59 {\textpm} 0.42 {\textmu}g/mL (MIC 11.56 {\textpm} 0.35 {\textmu}g/mL), respectively.

}, doi = {10.1055/s-0035-1557793}, author = {Bhardwaj, Rima and Chinchansure, Ashish A. and Kulkarni, Roshan R. and Arkile, Manisha A. and Sarkar, Dhiman and Joshi, Swati P.} } @article {45936, title = {Seeded on-surface supramolecular growth for large area conductive donor-acceptor assembly}, journal = {Chemical Communications}, volume = {51}, year = {2015}, month = {MAY}, pages = {10439-10442}, type = {Article}, abstract = {

Charge transport features of organic semiconductor assemblies are of paramount importance. However, large-area extended supramolecular structures of donor-acceptor combinations with controlled self-assembly pathways are hardly accessible. In this context, as a representative example, seeded on-surface supramolecular growth of tetrathiafulvalene and tetracyano-p-quinodimethane (TTF-TCNQ) using active termini of solution-formed sheaves has been introduced to form an extended assembly. We demonstrate for the first time, the creation of a large-area donor-acceptor assembly on the surface, which is practically very tedious, using a seeded, evaporation-assisted growth process. The excellent molecular ordering in this assembly is substantiated by its good electrical conductivity (similar to 10(-2) S cm(-1)). The on-surface assembly via both internally formed and externally added sheaf-like seeds open new pathways in supramolecular chemistry and device applications.

}, issn = {1359-7345}, doi = {10.1039/c5cc03091a}, author = {Goudappagouda and Chithiravel, Sundaresan and Krishnamoorthy, Kothandam and Gosavi, Suresh W. and Babu, Sukumaran Santhosh} } @article { ISI:000355317200045, title = {Selective inhibition of miR-21 by phage display screened peptide}, journal = {Nucleic Acids Research}, volume = {43}, number = {8}, year = {2015}, month = {APR}, pages = {4342-4352}, publisher = {OXFORD UNIV PRESS}, address = {GREAT CLARENDON ST, OXFORD OX2 6DP, ENGLAND}, abstract = {

miRNAs are nodal regulators of gene expression and deregulation of miRNAs is causally associated with different diseases, including cancer. Modulation of miRNA expression is thus of therapeutic importance. Small molecules are currently being explored for their potential to downregulate miRNAs. Peptides have shown to have better potency and selectivity toward their targets but their potential in targeting and modulating miRNAs remain unexplored. Herein, using phage display we found a very selective peptide against pre-miR-21. Interestingly, the peptide has the potential to downregulate miR-21, by binding to pre-miR-21 and hindering Dicer processing. It is selective towards miR-21 inside the cell. By antagonising miR-21 function, the peptide is able to increase the expression of its target proteins and thereby increase apoptosis and suppress cell proliferation, invasion and migration. This peptide can further be explored for its anti-cancer activity in vivo and may be even extended to clinical studies.

}, issn = {0305-1048}, doi = {10.1093/nar/gkv185}, author = {Bose, Debojit and Nahar, Smita and Rai, Manish Kumar and Ray, Arjun and Chakraborty, Kausik and Maiti, Souvik} } @article { ISI:000352448800019, title = {Self-assembled vertically aligned gold nanorod super-lattices for ultra-high sensitive detection of molecules}, journal = {Nano Research}, volume = {8}, number = {3}, year = {2015}, month = {MAR}, pages = {907-919}, publisher = {TSINGHUA UNIV PRESS}, address = {TSINGHUA UNIV, RM A703, XUEYAN BLDG, BEIJING, 10084, PEOPLES R CHINA}, abstract = {

We show that self-assembled vertically aligned gold nanorod (VA-GNRs) superlattices can serve as probes or substrates for ultra-high sensitive detection of various molecules. D-glucose and 2,4,6-trinitrotoluene (TNT) have been chosen as model systems due to their very low Raman cross-sections (5.6 x 10(-30) cm(2).molecule(-1).sr(-1) for D-glucose and 4.9 x 10(-31) cm(2). molecule(-1).sr(-1) for TNT) to show that the VA-GNR superlattice assembly offers as low as yoctomole sensitivity. Our experiment on mixed samples of bovine serum albumin (BSA) and D-glucose solutions demonstrate sensitivity for the latter, and the possible extension to real samples. Self-assembled superlattices of VA-GNRs were achieved on a silicon wafer by depositing a drop of solvent containing the GNRs and subsequent solvent evaporation in ambient conditions. An additional advantage of the VA-GNR monolayers is their extremely high reproducible morphology accompanied by ultrahigh sensitivity which will be useful in many fields where a very small amount of analyte is available. Moreover the assembly can be reused a number of times after removing the already present molecules. The method of obtaining VA-GNRs is simple, inexpensive and reproducible. With the help of simulations of monolayers and multilayers it has been shown that superlattices can achieve better sensitivity than monolayer assembly of VA-GNRs.

}, keywords = {Nanostructures, Raman spectroscopy, self-assemblies, sensors, superlattices}, issn = {1998-0124}, doi = {10.1007/s12274-014-0572-2}, author = {Apte, Amey and Bhaskar, Prashant and Das, Raja and Chaturvedi, Smita and Poddar, Pankaj and Kulkarni, Sulabha} } @article { ISI:000362964900007, title = {Sequence and structure-based comparative analysis to assess, identify and improve the thermostability of penicillin G acylases}, journal = {Journal of Industrial Microbiology \& Biotechnology}, volume = {42}, number = {11}, year = {2015}, month = {NOV}, pages = {1493-1506}, publisher = {SPRINGER HEIDELBERG}, address = {TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY}, abstract = {

Penicillin acylases are enzymes employed by the pharmaceutical industry for the manufacture of semi-synthetic penicillins. There is a continuous demand for thermostable and alkalophilic enzymes in such applications. We have carried out a computational analysis of known penicillin G acylases (PGAs) in terms of their thermostable nature using various protein-stabilizing factors. While the presence of disulfide bridges was considered initially to screen putative thermostable PGAs from the database, various other factors such as high arginine to lysine ratio, less content of thermolabile amino acids, presence of proline in beta-turns, more number of ion-pair and other non-bonded interactions were also considered for comparison. A modified consensus approach designed could further identify stabilizing residue positions by site-specific comparison between mesostable and thermostable PGAs. A most likely thermostable enzyme identified from the analysis was PGA from Paracoccus denitrificans (PdPGA). This was cloned, expressed and tested for its thermostable nature using biochemical and biophysical experiments. The consensus site-specific sequence-based approach predicted PdPGA to be more thermostable than Escherichia coli PGA, but not as thermostable as the PGA from Achromobacter xylosoxidans. Experimental data showed that PdPGA was comparatively less thermostable than Achromobacter xylosoxidans PGA, although thermostability factors favored a much higher stability. Despite being mesostable, PdPGA being active and stable at alkaline pH is an advantage. Finally, several residue positions could be identified in PdPGA, which upon mutation selectively could improve the thermostability of the enzyme.

}, keywords = {Alkalistable, beta-lactam antibiotics, Consensus approach, Disulfide bridge, Ion pairs, Penicillin acylase, Thermostability}, issn = {1367-5435}, doi = {10.1007/s10295-015-1690-x}, author = {Panigrahi, Priyabrata and Chand, Deepak and Mukherji, Ruchira and Ramasamy, Sureshkumar and Suresh, C. G.} } @article { ISI:000350221600066, title = {Silica microspheres containing high density surface hydroxyl groups as efficient epoxidation catalysts}, journal = {RSC Advances}, volume = {5}, number = {27}, year = {2015}, month = {FEB}, pages = {21125-21131}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Uniformly sized silica microspheres were synthesized by a hydrolysis-condensation method. The obtained material was etched with a mild aqueous potassium hydroxide solution for different periods of time to break their Si-O-Si bonds and increases the density of hydroxyl groups on their surfaces. The resulting materials were then used as transition metal-free catalysts for oxidation of olefins in the presence of hydrogen peroxide as a green oxidant. The materials were thoroughly characterized using various physicochemical techniques. These highly populated hydroxyl groups on the surface of silica microspheres were proven to be responsible for excellent conversion (up to 93\%) and epoxide selectivity (up to 100\%) for various olefins. Quantum mechanical calculations also corroborate the experimental findings. Furthermore, both experimental and theoretical studies show that tertiary silanols were present at the active sites of the catalyst surface and were responsible for olefin epoxidation.

}, issn = {2046-2069}, doi = {10.1039/c5ra00374a}, author = {Chandra, Prakash and Doke, Dhananjay S. and Shubhangi B. Umbarkar and Vanka, Kumar and Biradar, Ankush V.} } @article { ISI:000349384300005, title = {Single crystal-to-single crystal site-selective postsynthetic metal exchange in a Zn-MOF based on semi-rigid tricarboxylic acid and access to bimetallic MOFs}, journal = {Chemistry-A European Journal}, volume = {21}, number = {7}, year = {2015}, month = {FEB}, pages = {2759-2765}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The metal ions in a neutral Zn-MOF constructed from tritopic triacid H3L with inherent concave features, rigid core, and peripheral flexibility are found to exist in two distinct SBUs, that is, 0D and 1D. This has allowed site-selective postsynthetic metal exchange (PSME) to be investigated and reactivities of the metal ions in two different environments in coordination polymers to be contrasted for the first time. Site-selective transmetalation of Zn ions in the discrete environment is shown to occur in a single crystal-to-single crystal (SCSC) fashion, with metal ions such as Fe3+, Ru3+, Cu2+, Co2+, etc., whereas those that are part of 1D SBU sustain structural integrity, leading to novel bimetallic MOFs, which are inaccessible by conventional approaches. To the best of our knowledge, site-selective postsynthetic exchange of an intraframework metal ion in a MOF that contains metal ions in discrete as well as polymeric SBUs is heretofore unprecedented.

}, keywords = {coordination polymers, metal-exchange, metal-organic frameworks, Metathesis, X-ray crystallography}, issn = {0947-6539}, doi = {10.1002/chem.201406098}, author = {Bajpai, Alankriti and Chandrasekhar, Pujari and Govardhan, Savitha and Banerjee, Rahul and Moorthy, Jarugu Narasimha} } @article {45945, title = {Solvent free one-pot multi-component synthesis of beta-azaarene substituted ketones via a Sn-catalyzed C(sp(3))-H functionalization of 2-alkylazaarenes}, journal = {RSC Advances}, volume = {5}, year = {2015}, month = {NOV}, pages = {103091-103094}, type = {Article}, abstract = {

A tin-catalyzed solvent free one-pot multi-component cascade reaction strategy for the direct Michael addition/C(sp(3))-H functionalization of 2-alkylazaarenes with aldehydes and ketones via an aldol reaction has been developed. This is the first report and provides cost effective new access to potent biologically/medicinally important azaarene derivatives with high atom economy.

}, issn = {2046-2069}, doi = {10.1039/c5ra20728b}, author = {Chavan, Santosh S. and Pathan, Mohsinkhan Y. and Mulla, Shafeek A. R.} } @article { ISI:000363068700007, title = {Specific reagent for Cr(III): imaging cellular uptake of Cr(III) in Hct116 cells and theoretical rationalization}, journal = {Journal of Physical Chemistry B}, volume = {119}, number = {41}, year = {2015}, month = {OCT}, pages = {13018-13026}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A new rhodamine-based reagent (L-1), trapped inside the micellar structure of biologically benign Triton-X 100, could be used for specific recognition of Cr(III) in aqueous buffer medium having physiological pH. This visible light excitable reagent on selective binding to Cr(III) resulted in a strong fluorescence turn-on response with a maximum at similar to 583 nm and tail of that luminescence band extended until 650 nm, an optical response that is desired for avoiding the cellular autofluorescence. Interference studies confirm that other metal ions do not interfere with the detection process of Cr(III) in aqueous buffer medium having pH 7.2. To examine the nature of binding of Cr(III) to L-1, various spectroscopic studies are performed with the model reagent L-1 which tend to support Cr(III)-eta(2)-olefin pi-interactions involving two olefin bonds in molecular probe L-1. Computational studies are also performed with another model reagent L-M to examine the possibility of such Cr(III)-eta(2)-olefin pi-interactions. Presumably, polar functional groups of the model reagent L-M upon coordination to the Cr(III) center effectively reduce the formal charge on the metal ion and this is further substantiated by results of the theoretical studies. This assembly is found to be cell membrane permeable and shows insignificant toxicity toward live colon cancer cells (Hct116). Confocal laser scanning microscopic studies further revealed that the reagent L-1 could be used as an imaging reagent for detection of cellular uptake of Cr(III) in pure aqueous buffer medium by Hct116 cells. Examples of a specific reagent for paramagnetic Cr(III) with luminescence ON response are scanty in the contemporary literature. This ligand design helped us in achieving the turn on response by utilizing the conversion from spirolactam to an acyclic xanthene form on coordination to Cr(III).

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b07565}, author = {Ali, Firoj and Saha, Sukdeb and Maity, Arunava and Taye, Nandaraj and Si, Mrinal Kanti and Suresh, E. and Ganguly, Bishwajit and Chattopadhyay, Samit and Das, Amitava} } @article {43027, title = {Spirochromone-chalcone conjugates as antitubercular agents: synthesis, bio evaluation and molecular modeling studies}, journal = {RSC Advances}, volume = {5}, year = {2015}, month = {DEC}, abstract = {

A new series of spirochromone annulated chalcone conjugates were synthesized and evaluated for their antitubercular activity against Mycobacterium tuberculosis H37Rv strain. These compounds were subjected to molecular modeling studies using docking and chemoinformatics based approaches. The docking simulations were performed against a range of known receptors for chalcone derived compounds to reveal MTB phosphotyrosine phosphatase B [MtbPtpB] protein as the most probable target based on the high binding affinity scores. Five compounds exhibit significant inhibition, showing minimum inhibitory concentration values i.e. MIC values ranging from 3.13{\textendash}12.5 μg mL-1. Further analysis of the synthesized compounds with known and in-house developed chemoinformatics tools unequivocally established their potential as anti-tubercular compounds. QSAR modeling revealed a quantitative relationship between biological activities and frontier molecular orbital energies of synthesized compounds. The predictive model can be employed further for virtual screening of new compounds in this series.

}, doi = {10.1039/C5RA21737G}, author = {Mujahid, Mohammad and Perumal, Yogeeswari and Sriram, D. and Basavanag, U. M. V. and D{\i}az-Cervantes, Erik and Cordoba-Bahena, Luis and Robles, Juvencio and Gonnade, Rajesh Ghanshyam and Karthikeyan, Muthukumarasamy and Vyas, Renu and Krishnan, M. Muthu} } @article { ISI:000361935600025, title = {Star telechelic poly(L-lactide) ionomers}, journal = {Macromolecules}, volume = {48}, number = {18}, year = {2015}, month = {SEP}, pages = {6580-6588}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Poly(L-lactide) (PLA), a biodegradable and biorenewable polymer, has many excellent properties that are equivalent to those of petroleum-derived plastics such as polystyrene, aromatic polyesters, etc. However, a major disadvantage of PLA which limits its processability is its poor melt elasticity. In this work we explore the possibility of improving the viscoelastic properties of PLA melt by incorporating ionic groups on the polymer. Specifically, we demonstrate the synthesis of star telechelic PLA anionomers by a three-step procedure involving synthesis of Star PIA, converting the hydroxyl end groups into carboxylic acid end groups, and finally converting these into ionic groups. Rheology data showed a dramatic increase in the elasticity of the star telechelic ionomer melts relative to the Star PLA melts. The viscoelasticity of star telechelic ionomers melts could be modulated by varying the number of ionic groups per molecule.

}, issn = {0024-9297}, doi = {10.1021/acs.macromol.5b01854}, author = {Kulkarni, Amruta and Lele, Ashish K. and Sivaram, Swaminathan and Rajamohanan, P. R. and Velankar, Sachin and Chatterji, Apratim} } @article { ISI:000345901600049, title = {Stepwise isolation of low-valent, low-coordinate Sn and Pb mono- and dications in the coordination sphere of platinum}, journal = {Chemical Science}, volume = {6}, number = {1}, year = {2015}, month = {OCT}, pages = {425-435}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Synthetic access to low-coordinate Pb mono- and dications is in general impeded due to their poor solubility and highly electrophilic nature. However, the electrophilicity of these cations can be tamed by attaching them to electron-rich transition metals. Following this principle we have isolated low-valent Pb mono- ([(Cy3P)(2)Pt-PbCl](2)[AlCl4](2), 8a) and dications ([(Cy3P)(2)Pt(Pb)][AlCl4](2), 11) in the coordination sphere of platinum. The same approach then has been implemented for the isolation of analogous low-valent Sn mono- (7a) and dications (10). An energy decomposition analysis (EDA-NOCV) was performed to investigate the nature of Pt-Pb and Pb-Cl bonding in [(Cy3P)(2)Pt(PbCl2)] (2), 8a and 11. The results show that the Pt-Pb bonds in 8a and 11 are electron-sharing in nature, whereas that of the precursor 2 is a dative bond. The breakdown of attractive interactions in 2, 8a and 11 reveals that the ionic interactions in the analyzed Pt-Pb and Pb-Cl bonds are always stronger than the covalent interactions, except for the Pb-Cl bond in 8a. The calculated D3 dispersion energies show that dispersion interactions play a key role in the thermodynamic stability of 2, 8a and 11.

}, issn = {2041-6520}, doi = {10.1039/c4sc02948h}, author = {Braunschweig, Holger and Celik, Mehmet Ali and Dewhurst, Rian D. and Heid, Magdalena and Hupp, Florian and Sen, Sakya S.} } @article { ISI:000360415500050, title = {Structural order of water molecules around hydrophobic solutes: length-scale dependence and solute-solvent coupling}, journal = {Journal of Physical Chemistry B}, volume = {119}, number = {34}, year = {2015}, month = {AUG}, pages = {11346-11357}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

It has been suggested that the structure and thermodynamics of the water molecules in the hydration layer of simple hydrophobic solutes undergo an order disorder transition around a nanometer length-scale of the solute size. Using extensive atomistic molecular dynamics (MD) and replica exchange molecular dynamics (REMD) simulation studies, we have probed this order disorder transition around model hydrophobic solutes of varying size and shape (spherical, planar, and linear), as well as flexible hydrophobic homopolymer chains (n-alkanes), where the conformational fluctuations are likely to create both spatial and temporal heterogeneity on the solvent accessible surface. We have explored the structural response of the water molecules in the hydration shell due to the local variations of the length-scale (or curvature) upon hydrophobic collapse and/or local conformational changes of these polymers. We have shown that the tetrahedral order of the water molecules in the hydration shell is practically independent of the polymer size in the extended state of the polymer due to the availability of a subnanometer cross-sectional length-scale, allowing the water molecules to form hydrogen bonds around the polymer chain. Beyond a certain length of the polymer chains, the collapsed states (associated with larger solute length-scale) start to induce disorder in the surface water molecules. We demonstrate that the local structure (both local number density and tetrahedral order) of the hydration layer is dynamically coupled to the local topology of the polymer. Thus, we envisage that in a flexible (bio)polymer, the hydration shell properties will be sensitive to the local conformational state of the molecule (both spatially and temporally), and the overall observed water structure and dynamics will be dependent on the topological/chemical heterogeneity, and the time-scale of fluctuations in the local curvature (length-scale) of the solvent accessible surface. Moreover, we have demonstrated the direct coupling between the local density fluctuations of water and the local hydrophobic collapse of the polymer. For the extended state of the polymer, the local solvent density fluctuation is practically independent of the solute coordinate (length-scale), and the hydrophobic collapse of the polymer is prompted by a {\textquoteleft}{\textquoteleft}local dewetting{\textquoteright}{\textquoteright} process induced by these fluctuations.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b03449}, author = {Hande, Vrushali R. and Chakrabarty, Suman} } @article { ISI:000363727100011, title = {Structure mediation in substrate binding and post-translational processing of penicillin acylases: Information from mutant structures of Kluyvera citrophila penicillin G acylase}, journal = {Protein Science}, volume = {24}, number = {10}, year = {2015}, month = {OCT}, pages = {1660-1670}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Penicillin acylases are industrially important enzymes for the production of 6-APA, which is used extensively in the synthesis of secondary antibiotics. The enzyme translates into an inactive single chain precursor that subsequently gets processed by the removal of a spacer peptide connecting the chains of the mature active heterodimer. We have cloned the penicillin G acylase from Kluyvera citrophila (KcPGA) and prepared two mutants by site-directed mutagenesis. Replacement of N-terminal serine of the beta-subunit with cysteine (Ser beta 1Cys) resulted in a fully processed but inactive enzyme. The second mutant in which this serine is replaced by glycine (Ser beta 1Gly) remained in the unprocessed and inactive form. The crystals of both mutants belonged to space group P1 with four molecules in the asymmetric unit. The three-dimensional structures of these mutants were refined at resolutions 2.8 and 2.5 angstrom, respectively. Comparison of these structures with similar structures of Escherichia coli PGA (EcPGA) revealed various conformational changes that lead to autocatalytic processing and consequent removal of the spacer peptide. The large displacements of residues such as Arg168 and Arg477 toward the N-terminal cleavage site of the spacer peptide or the conformational changes of Arg145 and Phe146 near the active site in these structures suggested probable steps in the processing dynamics. A comparison between the structures of the processed Serb1Cys mutant and that of the processed form of EcPGA showed conformational differences in residues Arg alpha 145, Phe alpha 146, and Phe beta 24 at the substrate binding pocket. Three conformational transitions of Arg alpha 145 and Phe alpha 146 residues were seen when processed and unprocessed forms of KcPGA were compared with the substrate bound structure of EcPGA. Structure mediation in activity difference between KcPGA and EcPGA toward acyl homoserine lactone (AHL) is elucidated.

}, keywords = {acyl homoserine lactone, autocatalytic processing, conformational changes, KcPGA_Ser beta 1Cys, KcPGA_Ser beta 1Gly, Ntn hydrolase}, issn = {0961-8368}, doi = {10.1002/pro.2761}, author = {Chand, Deepak and Varshney, NishantKumar and Ramasamy, Sureshkumar and Panigrahi, Priyabrata and Brannigan, James A. and Wilkinson, Anthony J. and Suresh, C. G.} } @article { ISI:000355893400034, title = {Structure of nanorod assembly in the gyroid phase of diblock copolymer}, journal = {Journal of Physical Chemistry B}, volume = {119}, number = {22}, year = {2015}, month = {JUN}, pages = {6803-6812}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Diblock copolymers undergo microphase separation to form various microstructures, for example, lamellar, gyroid, cylindrical, cubic phases depending on compostion and segregation strength (Flory-Huggins parameter chi). Thus, it can act as template to organize doped nanomaterials into different 3D self-assembled structures located within the block copolymer matrix. Gyroid phase is One of the microstructures formed by block copolymer. It has a curved interfacial surface providing confinements throughout the matrix and thus can regulate the shape and sizes of self-assembled nanorods doped in it. Mesoscale simulation of model systems has been performed to explore the structure and dynamics of self-assembly of bundles formed by nanorods of different flexibilities in the gyroid phase of diblock copolymer matrix. Bundles of different shapes and sizes have been found to be formed depending on the nanorod bending flexibility and copolymer-nanorod interactions. The shape anisotropy (kappa(2)) and radius of gyration (R-g(2)) of bundles situated at different interfacial confining locations of block copolymer-matrices have been investigated as a function of nanorod flexibility and nanorod-diblock copolymer miscibility.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b01338}, author = {Chakraborty, Souvik and Roy, Sudip} } @article { ISI:000351843500020, title = {Supramolecular scaffolds on glass slides as sugar based rewritable sensors for bacteria}, journal = {Chemical Communications}, volume = {51}, number = {29}, year = {2015}, month = {MAR}, pages = {6346-6349}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We describe here the sugar functionalized beta-cyclodextrin-ferrocene glass slides as fully reversible bacterial biosensors under the influence of external adamantane carboxylic acid. The prototype D-mannose - E. coli ORN 178 and L-fucose - P. aeruginosa interactions serve as a model to illustrate the new approach.

}, issn = {1359-7345}, doi = {10.1039/c5cc01019e}, author = {Gade, Madhuri and Paul, Ajay and Alex, Catherine and Choudhury, Devika and Thulasiram, Hirekodathakallu V. and Kikkeri, Raghavendra} } @article { ISI:000358338300003, title = {Synthesis and antifungal potential of 1,2,3-triazole and 1,2,4-triazole thiol substituted strobilurin derivatives}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {54}, number = {7}, year = {2015}, month = {JUL}, pages = {908-917}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

beta-Methoxyacrylate group is an important pharmacophore of commercially used strobilurin fungicides. In the present study, a total of seventeen 1,2,4-triazole thiols 8a-h and 1,2,3-triazole substituted 10a-i strobilurin derivatives have been synthesized. 1,2,4-Triazole thiol substituted strobilurin derivatives 8a-h have been found to inhibit the growth of plant pathogens such as Fusarium oxysporum, Magnaporthe grisea, Drechslera oryzae and human pathogens Aspergillus fumigatus and different strains of Cryptococcus neoformans, with MIC in the range of 16-256 mu g/mL. In case of Candida albicans tested strain, the MIC is \> 256 mu g/mL. p-Chlorophenyl substituted 1,2,4-triazole thiol strobiulrin derivative 8e is the most potent inhibitor with MIC of 16-64 mu g/mL against most of the tested pathogens. Antifungal action of the compounds is due to inhibition of mitochondrial respiration. In the resazurin reduction assay, EC50 for inhibition of RZ reduction in D. oryzae by azoxystrobin and 8e are 3.42 +/- 0.03 mu g/mL and 3.63 +/- 0.21 mu g/mL, respectively; while in case of C. neoformans, EC50,, of azoxystrobin and 8e are between 0.65-0.85 mu g/mL. In a non-pathogenic model Benjaminiella poitrasii, though the MIC for all the synthesized compounds 8a-h and 10a-i are \> 256 mu g/ml, yeast to hypha transition is inhibited in the range of 21-75\% at 4 mu g/mL concentration while EC50 for inhibition of RZ reduction by azoxystrobin and 8e are 31.5 +/- 0.4 mu g/mL and 17.95 +/- 0.7 mu g/mL, respectively. The 50\% germ tube formation inhibition in case of C. albicans is observed at 108.49 mu g/mL. 1,2,4-Triazole thiol substituted strobilurin derivatives hold promise for the control of pathogenic fungi in agriculture and health care.

}, keywords = {1, 2, 3-triazole strobilurin, 4-triazole thiol strobilurin, antifungal, Strobilurin, Y-H transition inhibition}, issn = {0376-4699}, author = {Chaudhary, Preeti M. and Tupe, Santosh G. and Jorwekar, Shweta U. and Sant, Duhita G. and Deshpande, Sunita R. and Maybhate, Shailaja P. and Likhite, Anjali P. and Deshpande, Mukund V.} } @article { ISI:000346263800042, title = {Synthesis and characterization of PEPO grafted carboxymethyl guar and carboxymethyl tamarind as new thermo-associating polymers}, journal = {Carbohydrate Polymers}, volume = {117}, year = {2015}, month = {MAR}, pages = {331-338}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

New thermo associating polymers were designed and synthesized by grafting amino terminated poly(ethylene oxide-co-propylene oxide) (PEPO) onto carboxymethyl guar (CMG) and carboxymethyl tamarind (CMT). The grafting was performed by coupling reaction between-NH2 groups of PEPO and -COOH groups of CMG and CMT using water-soluble EDC/NHS as coupling agents. The grafting efficiency and the temperature of thermo-association, T-assoc in the copolymer were studied by NMR spectroscopy. The graft copolymers, CMG-g-PEPO and CMT-g-PEPO exhibited interesting thermo-associating behavior which was evidenced by the detailed rheological and fluorescence measurements. The visco-elastic properties (storage modulus, G{\textquoteright}; loss modulus, G{\textquoteright}{\textquoteright}) of the copolymer solutions were investigated using oscillatory shear experiments. The influence of salt and surfactant on the T-assoc was also studied by rheology, where the phenomenon of {\textquoteleft}{\textquoteleft}Salting out{\textquoteright}{\textquoteright} and {\textquoteleft}{\textquoteleft}Salting in{\textquoteright}{\textquoteright} was observed for salt and surfactant, respectively, which can give an easy access to tunable properties of these copolymers. These thermo-associating polymers with biodegradable nature of CMG and CMT can have potential applications as smart injectables in controlled release technology and as thickeners in cosmetics and pharmaceutical formulations. (C) 2014 Elsevier Ltd. All rights reserved.

}, keywords = {Carboxymethyl guar, Carboxymethyl tamarind, Pluronics, Rheology, Solution behavior, Thermo-associating polymers}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2014.09.073}, author = {Gupta, Nivika R. and Torris, Arun A. T. and Wadgaonkar, Prakash P. and Rajamohanan, P. R. and Ducouret, Guylaine and Hourdet, Dominique and Creton, Costantino and Badiger, Manohar V.} } @article { ISI:000363841700011, title = {Synthesis and characterization of thermotropic liquid crystalline polyimides}, journal = {Bulletin of Materials Science}, volume = {38}, number = {6}, year = {2015}, month = {OCT}, pages = {1553-1559}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Non-symmetrical and linear dyad-based mesogens were synthesised containing imine or ester bridging group. In the present work, due to the absence of branching in diamine-based mesogen, the structure has-rigidity inversely imine/ester bridging groups between two benzene rings imparts-flexible property to the mesogen and consequently rigid-flexible property has been balanced. The synthesised mesogens were characterized by different techniques including nuclear magnetic resonance and Fourier transform infrared spectroscopy. Liquid crystalline polymers (LCPs) were synthesised using pyromellitic dianhydride and 4-[(4-aminobenzylidene)amino]aniline or 4-aminophenyl-4-aminobenzoate. Subsequently, thermotropic liquid crystalline polymers (TLCPs) have also been evaluated to obtain optical microscopy textures at different temperatures which demonstrated interesting and notable changes. It is worth noting that marble-like textures were observed upto 200A degrees C.

}, keywords = {Diamine, liquid crystalline polymer, mesogen, optical microscopy textures, pyromellitic dianhydride}, issn = {0250-4707}, doi = {10.1007/s12034-015-0975-z}, author = {Mane, Sachin and Rajan, C. R. and Ponrathnam, Surendra and Chavan, Nayaku} } @article { ISI:000365710500009, title = {Synthesis, antioxidant, anti-inflammatory, and antimicrobial screening of newer thiophene-fused arylpyrazolyl 1,3,4-oxadiazoles}, journal = {Phosphorus Sulfur and Silicon and the Related Elements}, volume = {190}, number = {11}, year = {2015}, month = {NOV}, pages = {1803-1813}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

A series of newer 1,3,4-oxadiazole derivatives 3a-h, 5a-h containing a thiophene fused with pyrazole moiety of pharmacological significance have been synthesized. The compounds were characterized by H-1 NMR, IR, and mass spectral techniques. The compounds were screened for their in vitro antioxidant, anti-inflammatory and antimicrobial activities. Among them, Compounds 3b (EC50-14.98) and 3f (EC50-12.21) showed significant antioxidant activity. Compound 3a (EC50-15.23) showed good anti-inflammatory activity. Compound 3d was found as the most active derivative against bacterial and fungal strains.

}, keywords = {1, 3, 4-Oxadiazole, Anti-inflammatory, Antimicrobial, Antioxidant, EC50, Thiophene-fused pyrazole}, issn = {1042-6507}, doi = {10.1080/10426507.2015.1024784}, author = {Mahajan, Pravin S. and Nikam, Mukesh and Chate, Asha and Nimbalkar, Urja and Patil, Vrushali and Bobade, Anil and Chaudhari, Abhay and Deolankar, Dattatray and Javale, Balasaheb and Gill, Charansingh H.} } @article { ISI:000355856200084, title = {Synthesis, DNA interaction and anticancer activity of 2-anthryl substituted benzimidazole derivatives}, journal = {New Journal of Chemistry}, volume = {39}, number = {6}, year = {2015}, month = {APR}, pages = {4882-4890}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

2-Anthryl benzimidazole derivatives (5-7) with hydrogen, carboxyl and benzoyl substituents at the 5th position have been synthesized using a silica supported periodic acid catalyst. The DNA cleavage activity of 5-7 was studied in the presence of light using pBR322 plasmid DNA and was shown to vary with substitution at the 5th position of benzimidazole derivatives. DNA binding studies using ethidium bromide displacement assay demonstrated the non-intercalative binding mode of 5-7. The anticancer activity of these target molecules was tested against MCF-7 and HL-60 cell lines, and they exhibited remarkable activity in the micromolar range. Cellular uptake and morphological changes were confirmed by fluorescence and confocal microscopy. A molecular docking study was carried out to explore the DNA binding mechanism of 5-7.

}, issn = {1144-0546}, doi = {10.1039/c4nj02415j}, author = {Sontakke, Vyankat A. and Kate, Anup N. and Ghosh, Sougata and More, Piyush and Gonnade, Rajesh G. and Kumbhar, Navanath M. and Kumbhar, Anupa A. and Chopade, Balu Ananda and Shinde, Vaishali S.} } @article { ISI:000351584500007, title = {Synthesis of 3-ethyl-4-metyl-1h,5-dihydro-2h-pyrrol-2-one by novel palladium(ii)-catalyzed cyclization and ring-closing metathesis}, journal = {Synthesis-Stuttgart}, volume = {47}, number = {7}, year = {2015}, month = {APR}, pages = {955-960}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

Synthesis of 3-ethyl-4-methyl-1,5-dihydro-2H-pyrrol-2-one is described starting from commercially available allylamine and 4-methoxybenzylamine employing palladium-catalyzed cyclization or ring-closing metathesis as the key steps.

}, keywords = {antidiabetic, cyclization, glimepiride, lactams, metabolite, pyrrolinone, Ring-closing metathesis}, issn = {0039-7881}, doi = {10.1055/s-0034-1379985}, author = {Chavan, Subhash P. and Pathak, Ashok B. and Pawar, Kailash P.} } @article { ISI:000350698600007, title = {Synthesis of novel silica-polyimide nanocomposite films using aromatic-amino modified silica nanoparticles: mechanical, thermal and morphological investigations}, journal = {Express Polymer Letters}, volume = {9}, number = {5}, year = {2015}, month = {MAY}, pages = {469-479}, publisher = {BUDAPEST UNIV TECHNOL \& ECON}, address = {DEPT POLYMER ENG, MUEGYETEM RKP 3, BUDAPEST, H-1111, HUNGARY}, abstract = {

Silica nanoparticles were modified with aromatic amino groups and modified-silica/polyimide composite films were prepared using them. 3,3!, 4,4!-Benzophenone tetracarboxylic dianhydride (BTDA) and 4,4!-oxydianiline (ODA) were used as precursors for polyimide matrix. The structures of the modified nanoparticles and hybrid nanocomposites were identified using Fourier Transform Infrared (FTIR) spectrometry. The hybrid composite films were evaluated for mechanical, thermal and morphological characteristics. Morphological results describe a uniform dispersion of silica particles in the polymer matrix. The thermal stability and mechanical properties of polyimide composite were improved, and the decomposition temperature was increased when the amount of silica nanoparticles was increased.

}, keywords = {hybrid polyimide composites, mechanical properties, Nanocomposites, nanoparticle modification, Thermal properties}, issn = {1788-618X}, doi = {10.3144/expresspolymlett.2015.44}, author = {Ghorpade, Ravindra V. and Rajan, C. R. and Chavan, Nayaku and Ponrathnam, S.} } @article { ISI:000362239300030, title = {Systematic comparison of DFT and CCSD dipole moments, polarizabilities and hyperpolarizabilities}, journal = {Chemical Physics Letters}, volume = {635}, year = {2015}, month = {AUG}, pages = {168-173}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A comparative study of dipole moments, polarizabilities and hyperpolarizabilities of 16 different molecules is performed employing two completely different theoretical approaches namely, density functional theory (DFT) and coupled cluster singles and doubles (CCSD). Both methods include electron correlation. The CCSD method is more accurate but highly expensive. DFT with auxiliary density allows non-iterative solutions which is computational advantage and useful for large molecules. Dipole moments and polarizability calculations from DFT are in very good agreement with CCSD calculations. However, negative hyperpolarizability values from DFT differ significantly from their CCSD counterparts, whereas positive hyperpolarizabilities show reasonable agreement between these methodologies. (C) 2015 Elsevier B.V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2015.06.046}, author = {Karne, Anagha S. and Vaval, Nayana and Pal, Sourav and Vasquez-Perez, Jose M. and Koester, Andreas M. and Calaminici, Patrizia} } @article { ISI:000361649900037, title = {Systematic comparison of DFT and CCSD dipole moments, polarizabilities and hyperpolarizabilities (vol 635, pg 168, 2015)}, journal = {Chemical Physics Letters}, volume = {636}, year = {2015}, month = {SEP}, pages = {228-229}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {0009-2614}, doi = {10.1016/j.cplett.2015.08.034}, author = {Karne, Anagha S. and Vaval, Nayana and Pal, Sourav and Vasquez-Perez, Jose M. and Koester, Andreas M. and Calaminici, Patrizia} } @article { ISI:000354108200006, title = {Tailor made ionic liquids: catalyst and media for organic transformations}, journal = {Current Organic Chemistry}, volume = {19}, number = {8}, year = {2015}, month = {FEB}, pages = {728-742}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Ionic liquids are considered as one of the safe, green and environmentally benign solvents/catalysts for many organic reactions. Particularly, imidazolium based ionic liquids attracted much attention in basic as well as applied research. The major role of these ionic liquids is the replacement of the existing corrosive solvents, which are largely used in most of the organic processes and make these processes more eco-friendly. Recent report reveals the importance of imidazolium based ionic liquids, supported on silica gel or polystyrene in catalysis. The solid supports have well versed properties such as easy anchoring of ionic liquid, chemically and mechanically very stable and inert in nature. These ionic liquids can be tailored either by covalent attachment or simple deposition of the ionic liquid on the surface of the support. Both approaches showed enhanced reactivity and selectivity for various reactions. In this review, we made an attempt to review the recent reports related to synthesis and applications of tailor made ionic liquids and their use as catalyst in Aldol, Friedel-Crafts alkylation, hydroformylation, nucleophilic substitution and biomass transformation reactions.

}, keywords = {Green solvent, heterogeneous catalyst, organic transformation, sustainable process, task-specific ionic liquids}, issn = {1385-2728}, author = {Chandra, Prakash and Shinde, Sandip S. and Biradar, Ankush V.} } @article { ISI:000347890900011, title = {Targeting dormant tuberculosis bacilli: results for molecules with a novel pyrimidone scaffold}, journal = {Chemical Biology \& Drug Design}, volume = {85}, number = {2}, year = {2015}, month = {FEB}, pages = {201-207}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Our inability to completely control TB has been due in part to the presence of dormant mycobacteria. This also renders drug regimens ineffective and is the prime cause of the appearance of drug-resistant strains. In continuation of our efforts to develop novel antitubercular agents that especially target dormant mycobacteria, a set of 55 new compounds belonging to the pyrimidone class were designed on the basis of CoMFA and CoMSIA studies, and these were synthesized and subsequently tested against both the dormant and virulent BCG strain of M.tuberculosis. Some novel compounds have been identified which selectively inhibit the dormant tuberculosis bacilli with significantly low IC50 values. This study reports the second molecule after TMC-207, having the ability to inhibit tuberculosis bacilli exclusively in its dormant phase. The synthesis was accomplished by a modified multicomponent Biginelli reaction. A classification model was generated using the binary QSAR approach - recursive partitioning (RP) to identify structural characteristics related to the activity. Physicochemical, structural, topological, connectivity indices, and E-state key descriptors were used for generation of the decision tree. The decision tree could provide insights into structure-activity relationships that will guide the design of more potent inhibitors.

}, keywords = {Antitubercular activity, dormant tuberculosis bacilli, pyrimidones, recursive partitioning}, issn = {1747-0277}, doi = {10.1111/cbdd.12373}, author = {Joshi, Rohit R. and Barchha, Avinash and Khedkar, Vijay M. and Pissurlenkar, Raghuvir R. S. and Sarkar, Sampa and Sarkar, Dhiman and Joshi, Rohini R. and Joshi, Ramesh A. and Shah, Anamik K. and Coutinho, Evans C.} } @article { ISI:000364355500044, title = {Temperature-dependent raman spectroscopy of titanium trisulfide (TiS3) nanoribbons and nanosheets}, journal = {ACS Applied Materials \& Interfaces}, volume = {7}, number = {43}, year = {2015}, month = {NOV}, pages = {24185-24190}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Titanium trisulfide (TiS3) has recently attracted the interest of the 2D community because it presents a direct bandgap of similar to 1.0 eV, shows remarkable photoresponse, and has a predicted carrier mobility up to 10000 cm(2) V-1 s(-1). However, a study of the vibrational properties of TiS3, relevant to understanding the electron-phonon interaction that can be the main mechanism limiting the charge carrier mobility, is still lacking. In this work, we take the first steps to study the vibrational properties of TiS3 through temperature-dependent Raman spectroscopy measurements of TiS3 nanoribbons and nanosheets. Our investigation shows that all the Raman modes linearly soften (red shift) as the temperature increases from 88 to 570 K due to anharmonic vibrations of the lattice, which also includes contributions from the lattice thermal expansion. This softening with the temperature of the TiS3 modes is more pronounced than that observed in other 2D semiconductors, such as MoS2, MoSe2, WSe2, and black phosphorus (BP). This marked temperature dependence of the Raman spectra could be exploited to determine the temperature of TiS3 nanodevices by using Raman spectroscopy as a noninvasive and local thermal probe. Interestingly, the TiS3 nanosheets show a stronger temperature dependence of the Raman modes than the nanoribbons, which we attribute to lower interlayer coupling in the nanosheets.

}, keywords = {2D semiconductors, layered materials, Raman spectroscopy, thermal effect, TiS3 nanoribbons, TiS3 nanosheets}, issn = {1944-8244}, doi = {10.1021/acsami.5b07492}, author = {Pawbake, Amit S. and Island, Joshua O. and Flores, Eduardo and Ramon Ares, Jose and Sanchez, Carlos and Ferrer, Isabel J. and Jadkar, Sandesh R. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.} } @article { ISI:000363023500010, title = {Temporal protein expression pattern in intracellular signalling cascade during T-cell activation: a computational study}, journal = {Journal of Biosciences}, volume = {40}, number = {4}, year = {2015}, month = {OCT}, pages = {769-789}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Various T-cell co-receptor molecules and calcium channel CRAC play a pivotal role in the maintenance of cell{\textquoteright}s functional responses by regulating the production of effector molecules (mostly cytokines) that aids in immune clearance and also maintaining the cell in a functionally active state. Any defect in these co-receptor signalling pathways may lead to an altered expression pattern of the effector molecules. To study the propagation of such defects with time and their effect on the intracellular protein expression patterns, a comprehensive and largest pathway map of T-cell activation network is reconstructed manually. The entire pathway reactions are then translated using logical equations and simulated using the published time series microarray expression data as inputs. After validating the model, the effect of in silico knock down of co-receptor molecules on the expression patterns of their downstream proteins is studied and simultaneously the changes in the phenotypic behaviours of the T-cell population are predicted, which shows significant variations among the proteins expression and the signalling routes through which the response is propagated in the cytoplasm. This integrative computational approach serves as a valuable technique to study the changes in protein expression patterns and helps to predict variations in the cellular behaviour.

}, keywords = {Boolean model, co-receptors and CRAC channel, synchronous and asynchronous simulation, T-cell signalling pathway, temporal gene expression patterns}, issn = {0250-5991}, doi = {10.1007/s12038-015-9561-1}, author = {Ganguli, Piyali and Chowdhury, Saikat and Bhowmick, Rupa and Sarkar, Ram Rup} } @article { ISI:000363005100025, title = {Thermotropic liquid crystalline polyesters derived from bis-(4-hydroxybenzoyloxy)-2-methyl-1,4-benzene and aliphatic dicarboxylic acid chlorides}, journal = {Bulletin of Materials Science}, volume = {38}, number = {5}, year = {2015}, month = {SEP}, pages = {1301-1308}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

A series of thermotropic liquid crystalline polyesters derived from bis-(4-hydroxybenzoyloxy)-2-methyl-1,4-benzene(BHBOMB) and aliphatic dicarboxylic acid chlorides were investigated. All these polyesters were synthesized by interfacial polycondensation method and characterized by differential scanning calorimetry and wide-angle X-ray diffractometer. These polyesters consist of BHBOMB as a mesogenic diol and aliphatic diacid chlorides were used as flexible spacers. The length of oligomethylene units in polymer was varied from the trimethylene to the dodecamethylene groups. The transition temperatures and thermodynamic properties were studied for all these polymers. All these polyesters were soluble in chlorinated solvents such as chloroform, dichloromethane, dichloroethane, etc. More importantly, all these polyesters exhibited very large mesophase stability.

}, keywords = {dicarboxylic acid chloride, interfacial polycondensation, Liquid crystalline polyesters, rigid diol, thermotropic}, issn = {0250-4707}, author = {Mulani, Khudbudin Baban and Momin, Mohasin Shamshuddin and Ganjave, Nitin V. and Chavan, Nayaku} } @article { ISI:000352671600006, title = {Total synthesis of (R)-lipoic acid and (S)-lipoic acid via an Mn (III)-salen-catalyzed oxidative kinetic resolution}, journal = {Tetrahedron-Asymmetry}, volume = {26}, number = {5-6}, year = {2015}, month = {MAR}, pages = {281-287}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The asymmetric synthesis of both the antipodes of alpha-lipoic acid is described. The total synthesis of racemic and asymmetric lipoic acid is achieved from propane 1,3-diol. This work reports the use of Mn (III)-salen-catalyzed oxidative kinetic resolution as the key step to obtain enantiomerically pure (R)- and (S)-lipoic acid. The undesired product formed during the resolution can be recycled to achieve the desired isomer. (C) 2015 Elsevier Ltd. All rights reserved.

}, issn = {0957-4166}, doi = {10.1016/j.tetasy.2015.02.001}, author = {Purude, Abhijeet N. and Pawar, Kailash P. and Patil, Niteen B. and Kalkote, Uttam R. and Chavan, Subhash P.} } @article { ISI:000354043200025, title = {Trifunctional mesoporous silica-based, highly active catalyst for one-pot, three-step cascade reactions}, journal = {Chemical Communications}, volume = {51}, number = {40}, year = {2015}, month = {APR}, pages = {8496-8499}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report the synthesis of a trifunctional catalyst containing amine, sulphonic acid and Pd nanoparticle catalytic groups anchored on the pore walls of SBA-15. The catalyst efficiently catalyzes one-pot three-step cascade reactions comprising deacetylation, Henry reaction and hydrogenation, giving up to similar to 100\% conversion and 92\% selectivity to the final product.

}, issn = {1359-7345}, doi = {10.1039/c5cc01694k}, author = {Biradar, Ankush V. and Patil, Vijayshinha S. and Chandra, Prakash and Doke, Dhananjay S. and Asefa, Tewodros} } @article { ISI:000355856200034, title = {Tris-hydroxymethylaminomethane (THAM): a novel organocatalyst for a environmentally benign synthesis of medicinally important tetrahydrobenzo[b]pyrans and pyran-annulated heterocycles}, journal = {New Journal of Chemistry}, volume = {39}, number = {6}, year = {2015}, month = {MAR}, pages = {4452-4463}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

simple, efficient and environmentally benign protocol has been developed for the one-pot, multicomponent synthesis of medicinally important tetrahydrobenzo[b]pyrans and pyran-annulated heterocycles using a commercially available, inexpensive, non-toxic, and biodegradable tris-hydroxymethylaminomethane (THAM) as a novel organocatalyst. Ambient reaction conditions, wide scope, avoidance of conventional isolation as well as purification techniques and the reusability of the catalyst for five consecutive runs have improved the practical utility of this multicomponent reaction protocol manifold.

}, issn = {1144-0546}, doi = {10.1039/c4nj02346c}, author = {Pandit, Kapil S. and Chavan, Pramod V. and Desai, Uday V. and Kulkarni, Makarand A. and Wadgaonkar, Prakash P.} } @article { ISI:000351235800053, title = {Tunable band gap and coercivity of bismuth ferrite-polyaniline core-shell nanoparticles: the role of shell thickness}, journal = {RSC Advances}, volume = {5}, number = {30}, year = {2015}, month = {MAR}, pages = {23563-23568}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report a tunable band gap of bismuth ferrite-polyaniline core-shell nanoparticles from 2.24 to 1.98 eV and the variation of coercivity from 118 to 100 Oe, by varying the thickness of the polyaniline shell. Bismuth ferrite nanoparticles were synthesized via a chemical route and coating of polyaniline was achieved by a double surfactant layer technique. Coating of polyaniline introduced oxygen vacancies, local distortions and microstrains in the bismuth ferrite lattice which resulted in a change in the Fe-O-Fe bond angle of the bismuth ferrite lattice. This is confirmed with structural analysis tools i.e. X-ray Diffraction, Fourier Transform Infrared Spectroscopy and Raman spectroscopy. Moreover, the absorption of light around 600 nm is increased and photoluminescence emission around 430 nm is decreased, as the thickness of shell is increased, which also indicates the changes in optical properties due to variation in shell thickness. Thus tunability of the band gap and coercivity is achieved as a function of shell thickness in bismuth ferrite-polyaniline core-shell nanoparticles.

}, issn = {2046-2069}, doi = {10.1039/c5ra00933b}, author = {Chaturvedi, Smita and Das, Raja and Poddar, Pankaj and Kulkarni, Sulabha} } @article { ISI:000355360200058, title = {Vitellibacter nionensis sp nov., isolated from a shallow water hydrothermal vent}, journal = {International Journal of Systematic and Evolutionary Microbiology}, volume = {65}, number = {2}, year = {2015}, month = {FEB}, pages = {692-697}, publisher = {SOC GENERAL MICROBIOLOGY}, address = {MARLBOROUGH HOUSE, BASINGSTOKE RD, SPENCERS WOODS, READING RG7 1AG, BERKS, ENGLAND}, abstract = {

A novel, Gram-stain-negative, non-motile, rod-shaped yellow bacterium, designated VBW088(T) was isolated from a shallow water hydrothermal vent in Espalamaca in the Azores. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain VBW088(T) clustered with three type strains of species of the genus Vitellibacter and exhibited a sequence similarity of 97.3\% with Vitellibacter soesokkakensis RSSK-12(T). However, strain VBW088(T) and V. soesokkakensis RSSK-12(T) exhibited low DNA-DNA relatedness (12.7 +/- 3.5 \%). Strain VBW088(T) was positive for catalase and oxidase. Growth occurred at 10-37 degrees C, with the optimum at 80 degrees C, and at pH 6.0-8.0 (optimum pH 6.0) and in up to 5\% (w/v) NaCl with optimum growth at 1-2\% (w/v) NaCl. The major fatty acids (\>10\%) were iso-C-15:0 (33.5\%) and iso-C-17:0 3-OH (32.0\%). The polar lipids detected in strain VBW088(T) consisted of phosphatidylethanolamine, one unidentified aminolipid and three unidentified phospholipids. The DNA G+C content of strain VBW088(T) was 36.7 mol\%. On the basis of phylogenetic inference, DNA-DNA relatedness, chemotaxonomic analysis and physiological data, the isolate represents a novel species of the genus Vitellibacter, for which the name Vitellibacter nionensis sp. nov. is proposed, with the type strain as VBW088(T). (=KCTC 32420(T)=MCC 2354(T)).

}, issn = {1466-5026}, doi = {10.1099/ijs.0.070805-0}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Yoon, Jung-Hoon and Dastager, Syed Gulam and Liu, Qing and Thi-Nhan Khieu and Chu Ky Son and Li, Wen-Jun and Colaco, Ana} } @article { ISI:000373747700077, title = {Additive mediated syn-anti conformational tuning at nucleation to capture elusive polymorphs: remarkable role of extended pi-stacking interactions in driving the self-assembly}, journal = {Crystal Growth \& Design}, volume = {16}, number = {4}, year = {2016}, month = {APR}, pages = {2416-2428}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Understanding the process of prenucleation clustering at supersaturating stage is of significant importance to envisage the polymorphism in crystalline materials. Preferential formation of a thermodynamically stable crystal form suggests energetically favored patterns of interactions which control molecular aggregation during nucleation. Introduction of additives during crystallization is sometimes used as a suitable strategy to obtain metastable polymorphs in cases where it is not easy to capture the same by conventional crystallization methods. Comparative analysis of energy relationships and intermolecular interactions between thermodynamically stable and metastable crystal forms provides valuable clues about the nature of growth synthons at prenucleation clustering and preferential crystallization of the thermodynamic form. Conformationally flexible sulfonamide/sulfoester derivatives constituting electron rich and electron deficient aromatic rings were synthesized to study the interplay between pi-stacking and hydrogen bonding synthons. We have identified and characterized the thermodynamically stable and metastable elusive polymorphs of aromatic sulfonamides 1 and 2 and sulfoesters 3 and 4. However, these compounds eluded polymorphism during crystallisation from various common solvents/conditions and only produced thermodynamically stable crystals forms (form I crystals). Surprisingly, exploitation of pyrazinamide as an additive in different stoichiometric ratios during crystallization gave elusive polymorphs [three for 1 (form 1II, form 1III, and form 1IV) and one each for 2 (form 2II), 3 (form 3II), and 4 (form 4II)]. Molecules in stable crystal forms of these compounds are linked via extended chains of parallel displaced pi...pi stacking interactions that seem to play a vital role in driving the self-assembly of molecules and subsequently governing the nucleation process. In contrast, molecules in metastable polymorphs are devoid of such extended pi-stacking assemblies. Interestingly, differential scanning calorimetry, hot stage microscopy, and X-ray crystallographic studies confirmed the thermal crystal-to-crystal transition of all three metastable polymorphs of 1 (form 1II, form 1III, and form 1IV) to its thermodynamically stable crystal form (form 1I). Conformational analysis of molecule 1 using density functional theory calculations also validated higher stability for syn conformation (observed in Form 1I crystals) over anti and midway conformations (seen in metastable polymorphs). Melt crystallization of form 1I crystals of 1 on the larger face (001) of delta-pyrazinamide and lattice matching analysis (GRACE) revealed that the layered arrangement of molecules of delta-pyrazinamide (on 001 face) during heterogeneous nucleation acts as a template (heteroepitaxy) to provide a preferential site for the nucleation of new metastable polymorphs by selectively inhibiting the most preferred crystal form from growing into the nucleus. Solution state one- and two-dimensional (NOESY) H-1 NMR, scanning electron microscopy, and a Cambridge Structural Database survey were conducted to substantiate the role of additives during crystallization.

}, issn = {1528-7483}, doi = {10.1021/acs.cgd.6b00204}, author = {Gawade, Rupesh L. and Chakravarty, Debamitra K. and Kotmale, Amol and Sangtani, Ekta and Joshi, Pranaya V. and Ahmed, Awais and Mane, Manoj V. and Das, Susanta and Vanka, Kumar and Rajamohanan, Pattuparambil R. and Puranik, Vedavati G. and Gonnade, Rajesh G.} } @article {43588, title = {Adsorption of strontium (II) metal ions using phosphonate-functionalized polymer}, journal = {Bulletin of Materials Science}, volume = {39}, year = {2016}, month = {OCT}, pages = {1541-1556}, abstract = {Diethyl[3-(methoxydimethylsilyl)propyl]phosphonate (DMPP) polymer was synthesized for the strontium (II) metal ion recovery using diethylallylphosphonate as staring material. Diethylallylphosphonate was reacted with poly(methylhydro)siloxane (MW 1900-2000 g mol (-1) ) in the presence of Speier{\textquoteright}s catalyst. The synthesized monomer was characterized by IR, (1) H NMR, (1 3) C NMR and FT-IR spectroscopy techniques, and the synthesized polymers were characterized by IR and NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis and solubility. The synthesized polymer was used for sequestering strontium metal from the aqueous solution. The metal binding was examined by the energy dispersive spectroscopy and scanning electron microscopy for the adsorbed Sr(II). Batch adsorption studies were performed by varying three parameters, namely initial pH, adsorbent dose and the contact time. The reaction kinetics was determined by the Langmuir, Freundlich, and pseudo-first- and second-order models. Results of this study indicate that the synthesized polymer DMPP has been effective in removing Sr(II) from the aqueous solution.}, doi = {10.1007/s12034-016-1295-7}, author = {Bhosle, S. M. and Ponrathnam, S. and Tambe, S. S. and Chavan, N. N.} } @article {43569, title = {Alkyl-chain-separated triphenybenzene - carbazole conjugates and their derived polymers: candidates for sensory, electrical and optical materials}, journal = {Chemistry Select}, volume = {1}, year = {2016}, month = {DEC}, pages = {6649-6657}, abstract = {Four new triphenylbenzene based carbazoles (THPBCz4, THPBCz6, THPBCz8 and THPBCz10) and polycarbazoles (polyTHPBCz4, polyTHPBCz6, polyTHPBCz8 and polyTHPBCz10), have been synthesized. Photoluminescence spectra of the monomers in dichloromethane exhibit two intense bands at 353 and 369 nm. Two additional bands (410 and 435 nm) are also observed due to intermolecular interactions. These bands are more intense in the case of thin films, indicating stronger pp stacking interactions in the solid state. Due to the extended p-conjugation, the polycarbazoles display two main emission bands (495 and 520 nm) which are red shifted as compared to the monocarbazoles. Due to the presence of emissive platforms such as triarylbenzene and carbazole, both monomers and polymers, function as efficient sensors for the detection of polynitroaromatic analytes (PA, DNT, rho-DNB and m-DNB). The electrochemically polymerized carbazole derivatives showed maximum capacitance of 41 F/g for polyTHPBCz6. The SCLC measurement reveals a maximum mobility of 6 x 10(-6) cm(2)/Vs for polyTHPBCz4 that showed better packing due to flexible alkyl chains that connect the conjugated moieties.}, doi = {10.1002/slct.201601428}, author = {Kaleeswaran, D. and Vishnoi, Pratap and Kumar, Subramani and Chithiravel, Sundaresan and Walawalkar, Mrinalini G. and Krishnamoorthy, Kothandam and Murugavel, Ramaswamy} } @article { ISI:000369587800022, title = {Ammonium catalyzed cyclitive additions: evidence for a cation-pi interaction with alkynes}, journal = {Chemical Communications}, volume = {52}, number = {11}, year = {2016}, month = {DEC}, pages = {2311-2313}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The addition of carbamate nitrogen to a non-conjugated carbon-carbon triple bond is catalyzed by an ammonium salt leading to a cyclic product. Studies in homogeneous systems suggest that the ammonium agent facilitates nitrogen-carbon bond formation through a cation-p interaction with the alkyne unit that, for the first time, is directly observed by Raman spectroscopy.

}, issn = {1359-7345}, doi = {10.1039/c5cc08641h}, author = {Nagy, Edith and St Germain, Elijah and Cosme, Patrick and Maity, Pradip K. and Terentis, Andrew C. and Lepore, Salvatore D.} } @article { ISI:000372253700012, title = {Anion coordinated capsules and pseudocapsules of tripodal amide, urea and thiourea scaffolds}, journal = {RSC Advances}, volume = {6}, number = {32}, year = {2016}, month = {MAR}, pages = {26568-26589}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This review aims to deliver a detailed and comparative account of the reported examples of anion (halide and oxyanions) coordinated capsules and pseudocapsules of tripodal receptors that employ hydrogen bonds and/or electrostatic hydrogen bonds offered by specific binding sites from amide, urea and thiourea functionalities. The review discusses both the structural aspects of anion binding and solution-state anion binding affinities of N-bridged and aryl-bridged tripodal receptors. Discussions relating to selective anion recognition and separation, carbondioxide uptake, and transmembrane anion transport, as demonstrated by some of these tripodal receptors have also been included in this review.

}, issn = {2046-2069}, doi = {10.1039/c6ra00268d}, author = {Dey, Sandeep Kumar and Basu, Arghya and Chutia, Romen and Das, Gopal} } @article { ISI:000377612300010, title = {Asymmetric total synthesis of L-allo-1-deoxynojirimycin}, journal = {Arkivoc}, number = {2}, year = {2016}, month = {OCT}, pages = {137-147}, publisher = {ARKAT USA INC}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

Asymmetric total synthesis of L-allo-1-deoxynojirimycin (L-allo-DNJ) was achieved from cis-butene-1,4-diol by employing Sharpless asymmetric dihydroxylation, stereoselective flash dihydroxylation and ring enlargement reactions as key steps.

}, keywords = {diastereoselective flash dihydroxylation, ring-enlargement reaction, sharpless asymmetric dihydroxylation}, issn = {1551-7004}, doi = {10.3998/ark.5550190.p009.295}, author = {Chavan, Subhash P. and Dumare, Nilesh B. and Pawar, Kailash P. and Chavan, Prakash N. and Khairnar, Lalit B.} } @inbook {45837, title = {Balancing omega-6: Omega-3 ratios in oilseeds}, booktitle = {Omega-3 fatty acids: keys to nutritional health}, year = {2016}, pages = {203-220}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {Fats and oils are the essential constituents of human diet, and nearly 80 \% of these are obtained from plants. The predominant fatty acids present in plant oils are saturated and unsaturated compounds with straight aliphatic chains of carbon atoms and a single carboxyl group. Depending on the position of the first double bond from the methyl end in the fatty acyl chain, the mono- and polyunsaturated fatty acids can be denoted as -9, -6, or -3. Excess consumption of -6 fatty acids has greatly and unfavorably increased the -6: -3 ratio up to 25:1, which is associated with prevalence of many negative health effects, including cardiovascular diseases, cancer, osteoporosis, and inflammatory and autoimmune diseases. Because the -3 fatty acids (FAs) are the precursors for synthesis of anti-inflammatory eicosanoids, balancing the -6: -3 ratio is vital. The easiest approach to achieve this would be consumption of oils rich in -3 FAs, such as linseed oil. Alternatively, the fatty acid biosynthetic pathway in plants producing high -6 FAs can be altered by biotechnological means, so that they produce higher proportion of -3 FAs. This chapter describes the current knowledge of the fatty acid biosynthesis pathway in plants, including the genes involved, their temporal and spatial expression patterns, and various fluxes that they drive. The choice of oilseeds, genes, and promoters for modulating the fatty acid biosynthesis flux from -6 to -3 fatty acids is also dealt with. The potential hurdles in achieving these and possible solutions have also been described.}, doi = {10.1007/978-3-319-40458-5_15}, author = {Chirmade, T. P. and Sanghi, S. and Rajwade, A .V. and Gupta, V. S. and Kadoo, N. Y.} } @article { ISI:000363815800016, title = {Bicinchoninic acid-based colorimetric chemosensor for detection of low concentrations of cyanide}, journal = {Sensors and Actuators B-Chemical}, volume = {222}, year = {2016}, month = {JAN}, pages = {112-119}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Bicinchoninic acid (BCA) is reagent that is widely used to determine the concentration of proteins in solutions through the colored complex it forms with Cu(I) and the proteins. In this report, we present a new use for BCA, where a highly sensitive method for detection of cyanide ions in solutions by using Cu2+-BCA complex as the chemosensing agent is demonstrated. The detection of cyanide ions is achieved by taking advantage of the nucleophilic attack of the Cu2+-BCA complex by cyanide ions. Upon the addition of cyanide ions, the Cu2+-BCA complex undergoes transformations to free BCA via a series of equilibriums and, as a result, forms different Cu(II)-(BCA)(x)(CN)(y) species depending on the concentrations of cyanide ions in the solution. These different Cu(II)-(BCA)(x)(CN)(y) species, in turn, give different metal-to-ligand charge transfer electronic spectra and colors that are easily detectable both with naked eyes and UV-vis spectroscopy. As the cyanide ion concentration increases, the color of the solution containing the complexes changes from green to purple, red, yellow, and finally colorless, giving a corresponding blue shift in the absorption maxima on their UV-vis spectra. Through this process, the complexes enable detection of cyanide ions with a detection level of up to 0.06 ppm in solutions. Thus, this colorimetric technique based on Cu2+-BCA can make low concentrations of cyanide detectable, well before the concentrations possibly reach lethal amounts. Furthermore, the method is shown to give fast detection response with no interference from other anionic and cationic species and has the potential to be adopted for accurate and convenient analysis of cyanide ions in drinking water sources as well as industrial effluents. (C) 2015 Elsevier B.V. All rights reserved.

}, keywords = {BCA, Bicinchoninic acid, Chemosensor, Colorimetric sensor, Copper, Cyanide}, issn = {0925-4005}, doi = {10.1016/j.snb.2015.08.043}, author = {Biradar, Archana A. and Biradar, Ankush V. and Sun, Tiffany and Chan, Yung and Huang, Xiaoxi and Asefa, Tewodros} } @article {43614, title = {Bilayer cryogel wound dressing and skin regeneration grafts for the treatment of acute skinwounds}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {JUN}, pages = {15145-15159}, abstract = {In this study, the potential of cryogel bilayer wound dressing and skin regenerating graft for the treatment of surgically created full thickness wounds was evaluated. The top layer was composed of polyvinylpyrrolidone-iodine (PVP-I) and served as the antiseptic layer, while the bottom regenerative layer was made using gelatin cryogel. Both components of the bilayer showed typical features of a cryogel interconnected macropore network, rapid swelling, high water uptake capacity of about 90\%. Both PVP and gelatin cryogel showed high tensile strength of 45 and 10 kPa, respectively. Gelatin cryogel sheets were essentially elastic and could be stretched without any visible deformation. The antiseptic PVP-I layer cryogel sheet showed sustained iodine release and suppressed microbial growth when tested with skin pathogens (zone of inhibition cm for sheet of 0.9 cm diameter). The gelatin cryogel sheet degraded in vitro in weeks. The gelatin cryogel sheet supported cell infiltration, attachment, and proliferation of fibroblasts and keratinocytes. Microparticles loaded with bioactive molecules (mannose-6-phosphate and human fibrinogen) were also incorporated in the gelatin cryogel sheets for their role in enhancing skin regeneration and scar free wound healing. In vivo evaluation of healing capacity of the bilayer cryogel was checked in rabbits by creating full thickness wound, defect (diameter 2 cm). Macroscopic and microscopic observation at regular time intervals for 4 weeks demonstrated better and faster skin regeneration in the wound treated with cryogel bilayer as compared to untreated defect and the repair was comparable to commercial skin regeneration scaffold Neuskin-F. Complete skin regeneration was observed after 4 weeks{\textquoteright} of implantation with no sign of inflammatory response. Defects implanted with cryogel having mannose-6-phosphate showed no scar formation,, while the wound treated with bilayer incorporated with human fibrinogen microparticles showed early signs of skin regeneration; epidermis formation occurred at 2 weeks after implantation.}, doi = {10.1021/acsami.6b04711}, author = {Priya, S. Geetha and Gupta, Ankur and Jain, Era and Sarkar, Joyita and Damania, Apeksha and Jagdale, Pankaj R. and Chaudhari, Bhushan P. and Gupta, Kailash C. and Kumar, Ashok} } @article { ISI:000371117900016, title = {Bioresponsive carbon nano-gated multifunctional mesoporous silica for cancer theranostics}, journal = {Nanoscale}, volume = {8}, number = {8}, year = {2016}, month = {DEC}, pages = {4537-4546}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Designing bioresponsive nanocarriers for controlled and efficient intracellular drug release for cancer therapy is a major thrust area in nanomedicine. With recent recognition by the US FDA as a safe material for human trials, mesoporous silica nanoparticles (MSNPs) are being extensively explored as promising theranostic agents. Green fluorescent carbon quantum dots (CQDs), though known as possible alternatives for their more toxic and relatively less efficient predecessors, are less known as gate keepers for drug release control. We report for the first time an efficient bioresponse of CQDs when judiciously designed using glutathione cleavable (redox responsive) disulphide bonds. When the anticancer drug doxorubicin loaded MSNPs are capped with these CQDs, they display promising drug release control on exposure to a mimicked intracellular cancer environment. Their dual functionality is well established with good control on preventing the premature release and exceptional bio-imaging of HeLa cancer cells. Fluorescence images prove selective targeting of HeLa cells by overexpression of folate receptors from the surface functionalised folic acid ligand. Extensive characterisation using XRD, TEM, BET analysis, drug loading tests, drug release kinetics, MTT assay and fluoroscence cell imaging helps in understanding the multi-functionalities of the successful design, extending its scope with exciting prospects towards non-invasive targeted drug delivery and bio-imaging for effective cancer diagnosis and treatment.

}, issn = {2040-3364}, doi = {10.1039/c5nr06756a}, author = {Prasad, Rajendra and Aiyer, Sandhya and Chauhan, Deepak S. and Srivastava, Rohit and Selvaraj, Kaliaperumal} } @article { ISI:000369937200001, title = {Biosurfactant as a promoter of methane hydrate formation: thermodynamic and kinetic studies}, journal = {Scientific Reports}, volume = {6}, year = {2016}, month = {FEB}, pages = {20893}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

Natural gas hydrates (NGHs) are solid non-stoichiometric compounds often regarded as a next generation energy source. Successful commercialization of NGH is curtailed by lack of efficient and safe technology for generation, dissociation, storage and transportation. The present work studied the influence of environment compatible biosurfactant on gas hydrate formation. Biosurfactant was produced by Pseudomonas aeruginosa strain A11 and was characterized as rhamnolipids. Purified rhamnolipids reduced the surface tension of water from 72 mN/m to 36 mN/m with Critical Micelle Concentration (CMC) of 70 mg/l. Use of 1000 ppm rhamnolipids solution in C type silica gel bed system increased methane hydrate formation rate by 42.97\% and reduced the induction time of hydrate formation by 22.63\% as compared to water saturated C type silica gel. Presence of rhamnolipids also shifted methane hydrate formation temperature to higher values relative to the system without biosurfactant. Results from thermodynamic and kinetic studies suggest that rhamnolipids can be applied as environment friendly methane hydrate promoter.

}, issn = {2045-2322}, doi = {10.1038/srep20893}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Kumar, Rajnish and Balomajumder, Chandrajit and Singh, Anil Kumar and Santhakumari, B. and Kumar, Pushpendra and Laik, Sukumar} } @article {43407, title = {Budding trends in integrated pest management using advanced micro- and nano-materials: challenges and perspectives}, journal = {Journal of Environmental Management}, volume = {184}, year = {2016}, month = {DEC}, pages = {157-169}, abstract = {One of the most vital supports to sustain human life on the planet earth is the agriculture system that has been constantly challenged in terms of yield. Crop losses due to insect pest attack even after excessive use of chemical pesticides, are major concerns for humanity and environment protection. By the virtue of unique properties possessed by micro and nano-structures, their implementation in Agri-biotechnology is largely anticipated. Hence, traditional pest management strategies are now forestalling the potential of micro and nanotechnology as an effective and viable approach to alleviate problems pertaining to pest control. These technological innovations hold promise to contribute enhanced productivity by providing novel agrochemical agents and delivery systems. Application of these systems engages to achieve: i) control release of agrochemicals, ii) site-targeted delivery of active ingredients to manage specific pests, iii) reduced pesticide use, iv) detection of chemical residues, v) pesticide degradation, vi) nucleic acid delivery and vii) to mitigate post-harvest damage. Applications of micro and nano-technology are still marginal owing to the perception of low economic returns, stringent regulatory issues involving safety assessment and public awareness over their uses. In this review, we highlight the potential application of micro and nano-materials with a major focus on effective pest management strategies including safe handling of pesticides. (C) 2016 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.jenvman.2016.09.071}, author = {Khandelwal, Neha and Barbole, Ranjit S. and Banerjee, Shashwat S. and Chate, Govind P. and Biradar, Ankush V. and Khandare, Jayant J. and Giri, Ashok P.} } @article { ISI:000378725800123, title = {Catecholase and phenoxazinone synthase activities of a ferromagnetically coupled tetranuclear Cu(II) complex}, journal = {RSC Advances}, volume = {6}, number = {63}, year = {2016}, month = {JUN}, pages = {58831-58838}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A crystallographically characterized tetranuclear Cu(II) complex [Cu-4(II)(L)(4)] (1) [H2L = N-(2-hydroxyethyl)-3-methoxysalicylaldimine] is found to show overall ferromagnetic exchange coupling. Complex (1) mimics the catalytic activity of the plant enzyme catechol oxidase by oxidising 3,5-di-tert-butylcatechol to its corresponding quinone in methanol and dichloromethane medium in the presence of aerial oxygen. The reaction follows Michaelis-Menten enzymatic reaction kinetics with turnover numbers (K-cat) 6.99 x 10(3) and 1.85 x 10(3) h(-1) in methanol and dichloromethane, respectively. 1 is also phenoxazinone synthase active in methanol medium with a turnover number of 1.21 x 10(5) h(-1).

}, issn = {2046-2069}, doi = {10.1039/c6ra11433d}, author = {Mitra, Merry and Kundu, Tanay and Kaur, Gurpreet and Sharma, Gyaneswar and Choudhury, Angshuman Roy and Singh, Yogesh and Ghosh, Rajarshi} } @article { ISI:000378450800001, title = {Characterization of two coleopteran alpha-amylases and molecular insights into their differential inhibition by synthetic alpha-amylase inhibitor, acarbose}, journal = {Insect Biochemistry and Molecular Biology}, volume = {74}, year = {2016}, month = {JUL}, pages = {1-11}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Post-harvest insect infestation of stored grains makes them unfit for human consumption and leads to severe economic loss. Here, we report functional and structural characterization of two coleopteran alpha-amylases viz. Callosobruchus chinensis alpha-amylase (CcAmy) and Tribolium castaneum alpha-amylase (TcAmy) along with their interactions with proteinaceous and non-proteinaceous alpha-amylase inhibitors. Secondary structural alignment of CcAmy and TcAmy with other coleopteran alpha-amylases revealed conserved motifs, active sites, di-sulfide bonds and two point mutations at spatially conserved substrate or inhibitor binding sites. Homology modeling and molecular docking showed structural differences between these two enzymes. Both the enzymes had similar optimum pH values but differed in their optimum temperature. Overall, pattern of enzyme stabilities were similar under various temperature and pH conditions. Further, CcAmy and TcAmy differed in their substrate affinity and catalytic efficiency towards starch and amylopectin. HPLC analysis detected common amylolytic products like maltose and maltotriose while glucose and malto-tetrose were unique in CcAmy and TcAmy catalyzed reactions respectively. At very low concentrations, wheat alpha-amylase inhibitor was found to be superior over the acarbose as far as complete inhibition of amylolytic activities of CcAmy and TcAmy was concerned. Mechanism underlying differential amylolytic reaction inhibition by acarbose was discussed. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Acarbose, alpha-amylase, alpha-amylase inhibitor, Callosobruchus chinensis, Coleoptera, Tribolium castaneum}, issn = {0965-1748}, doi = {10.1016/j.ibmb.2016.04.009}, author = {Channale, Sonal M. and Bhide, Amey J. and Yadav, Yashpal and Kashyap, Garima and Pawar, Pankaj K. and Maheshwari, V. L. and Ramasamy, Sureshkumar and Giri, Ashok P.} } @article { ISI:000373163100005, title = {Chemically stable covalent organic framework (COF)-polybenzimidazole hybrid membranes: enhanced gas separation through pore modulation}, journal = {Chemistry-A European Journal}, volume = {22}, number = {14}, year = {2016}, month = {MAR}, pages = {4695-4699}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Highly flexible, TpPa-1@PBI-BuI and TpBD@PBI-BuI hybrid membranes based on chemically stable covalent organic frameworks (COFs) could be obtained with the polymer. The loading obtained was substantially higher (50\%) than generally observed with MOFs. These hybrid membranes show an exciting enhancement in permeability (about sevenfold) with appreciable separation factors for CO2/N-2 and CO2/CH4. Further, we found that with COF pore modulation, the gas permeability can be systematically enhanced.

}, keywords = {covalent organic frameworks, Gas separation, membranes, microporous materials, pore modulation}, issn = {0947-6539}, doi = {10.1002/chem.201504836}, author = {Biswal, Bishnu P. and Chaudhari, Harshal D. and Banerjee, Rahul and Kharul, Ulhas K.} } @article { ISI:000381562500001, title = {Cholesterol-dependent conformational plasticity in GPCR dimers}, journal = {Scientific Reports}, volume = {6}, year = {2016}, month = {AUG}, pages = {31858}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

The organization and function of the serotonin1A receptor, an important member of the GPCR family, have been shown to be cholesterol-dependent, although the molecular mechanism is not clear. We performed a comprehensive structural and dynamic analysis of dimerization of the serotonin1A receptor by coarse-grain molecular dynamics simulations totaling 3.6 ms to explore the molecular details of its cholesterol-dependent association. A major finding is that the plasticity and flexibility of the receptor dimers increase with increased cholesterol concentration. In particular, a dimer interface formed by transmembrane helices I-I was found to be sensitive to cholesterol. The modulation of dimer interface appears to arise from a combination of direct cholesterol occupancy and indirect membrane effects. Interestingly, the presence of cholesterol at the dimer interface is correlated with increased dimer plasticity and flexibility. These results represent an important step in characterizing the molecular interactions in GPCR organization with potential relevance to therapeutic interventions.

}, issn = {2045-2322}, doi = {10.1038/srep31858}, author = {Prasanna, Xavier and Sengupta, Durba and Chattopadhyay, Amitabha} } @article { ISI:000374440100005, title = {Colloidal assembly by ice templating}, journal = {Faraday Discussions}, volume = {186}, year = {2016}, month = {OCT}, pages = {61-76}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We investigate ice templating of aqueous dispersions of polymer coated colloids and crosslinkers, at particle concentrations far below that required to form percolated monoliths. Freezing the aqueous dispersions forces the particles into close proximity to form clusters, that are held together as the polymer chains coating the particles are crosslinked. We observe that, with an increase in the particle concentration from about 106 to 108 particles per ml, there is a transition from isolated single particles to increasingly larger clusters. In this concentration range, most of the colloidal clusters formed are linear or sheet like particle aggregates. Remarkably, the cluster size distribution for clusters smaller than about 30 particles, as well as the size distribution of linear clusters, is only weakly dependent on the dispersion concentration in the range that we investigate. We demonstrate that the main features of cluster formation are captured by kinetic simulations that do not consider hydrodynamics or instabilities at the growing ice front due to particle concentration gradients. Thus, clustering of colloidal particles by ice templating dilute dispersions appears to be governed only by particle exclusion by the growing ice crystals that leads to their accumulation at ice crystal boundaries.

}, issn = {1359-6640}, doi = {10.1039/c5fd00125k}, author = {Kumaraswamy, Guruswamy and Biswas, Bipul and Choudhury, Chandan Kumar} } @article { ISI:000368941700025, title = {Comparative study of dG affinity vs. DNA methylation modulating properties of side chain derivatives of procainamide: insight into its DNA hypomethylating effect}, journal = {RSC Advances}, volume = {6}, number = {7}, year = {2016}, month = {JAN}, pages = {5350-5358}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Procainamide derivatives have been synthesized to investigate the role of side chains in modulating the DNA methylation level in cancer cells and gain insight into its mechanism of action. The synthesized derivatives comprised of flexible (dimethyl), constrained (pyrrolidine, piperidine, morpholine) and planar aromatic (pyridine, phenyl) side chain motifs. The affinity of procainamide and its derivatives towards the deoxyguanosine (dG) base in neutral form has been assessed by performing Differential Pulse Voltammetry (DPV) under physiological conditions. Further, molecular docking with hemimethylated CpG rich DNA acquired from an active mDNMT-1-DNA (PDB ID-4DA4) crystal structure, reveals their preferential non-covalent interaction with dG nucleobase in the intercalation cavity of the minor groove. Differential affinity of the derivatives to dG base in neutral and bound forms (DNA) is correlated with their DNA methylation modulating properties at sub-lethal concentrations. Among all the derivatives, a compound with an aromatic phenyl side chain (1) has shown a highest binding affinity for dG nucleobase in neutral form as well as for partially denatured CpG rich DNA which is attributed to the formation of p/p stacking interaction in addition to N-H/O hydrogen bonding with the pyrimidine ring of dG base. It also shows the highest cytotoxicity and global hypomethylation at a sub-lethal level in the MCF-7 cancer cell line compared to other derivatives and procainamide. A docking study has also illustrated the plausible structural basis of DNA methylation modulating a property of procainamide. Strong association of procainamide with dG bases of partially denatured CpG rich DNA via H-bonding and other non-covalent interactions may alter the active topology of DNA required by the DNA-binding regulatory proteins (e. g. DNMT-1) which is validated by a DNMT-1 inhibition assay. This systematic investigation leads to a new potent alternative to procainamide being found and gives a plausible insight into the DNA hypomethylating effect of procainamide.

}, issn = {2046-2069}, doi = {10.1039/c5ra20012a}, author = {Gawade, Rupesh L. and Chakravarty, Debamitra K. and Debgupta, Joyashish and Sangtani, E. and Narwade, S. and Gonnade, Rajesh G. and Puranik, Vedavati G. and Deobagkar, D. D.} } @article { ISI:000381384300031, title = {Composition dependence of the glass forming ability in binary mixtures: the role of demixing entropy}, journal = {Journal of Chemical Physics}, volume = {145}, number = {3}, year = {2016}, month = {JUL}, pages = {Article Number: 034503}, publisher = {AMER INST PHYSICS}, address = {1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA}, abstract = {

We present a comparative study of the glass forming ability of binary systems with varying composition, where the systems have similar global crystalline structure (CsCl+fcc). Biased Monte Carlo simulations using umbrella sampling technique show that the free energy cost to create a CsCl nucleus increases as the composition of the smaller particles is decreased. We find that systems with comparatively lower free energy cost to form CsCl nucleus exhibit more pronounced pre-crystalline demixing near the liquid/crystal interface. The structural frustration between the CsCl and fcc crystal demands this demixing. We show that closer to the equimolar mixture, the entropic penalty for demixing is lower and a glass forming system may crystallize when seeded with a nucleus. This entropic penalty as a function of composition shows a non-monotonic behaviour with a maximum at a composition similar to the well known Kob-Anderson (KA) model. Although the KA model shows the maximum entropic penalty and thus maximum frustration against CsCl formation, it also shows a strong tendency towards crystallization into fcc lattice of the larger {\textquoteleft}{\textquoteleft}A{\textquoteright}{\textquoteright} particles which can be explained from the study of the energetics. Thus for systems closer to the equimolar mixture although it is the requirement of demixing which provides their stability against crystallization, for KA model it is not demixing but slow dynamics and the presence of the {\textquoteleft}{\textquoteleft}B{\textquoteright}{\textquoteright} particles make it a good glass former. The locally favoured structure around {\textquoteleft}{\textquoteleft}B{\textquoteright}{\textquoteright} particles is quite similar to the CsCl structure and the incompatibility of CsCl and fcc hinders the fcc structure growth in the KA model. Although the glass forming binary systems studied here are quite similar, differing only in composition, we find that their glass forming ability cannot be attributed to a single phenomenon. Published by AIP Publishing.

}, issn = {0021-9606}, doi = {10.1063/1.4958630}, author = {Nandi, Ujjwal Kumar and Banerjee, Atreyee and Chakrabarty, Suman and Bhattacharyya, Sarika Maitra} } @article { ISI:000375142200228, title = {Conformational dynamics of GPCR dimers is dependent on membrane cholesterol}, journal = {Biophysical Journal}, volume = {110}, number = {3, 1}, year = {2016}, note = {60th Annual Meeting of the Biophysical-Society, Los Angeles, CA, FEB 27-MAR 02, 2016}, month = {FEB}, pages = {356A-356A}, publisher = {Biophys Soc}, address = {600 TECHNOLOGY SQUARE, 5TH FLOOR, CAMBRIDGE, MA 02139 USA}, issn = {0006-3495}, author = {Sengupta, Durba and Prasanna, Xavier and Chattopadhyay, Amitabha} } @article { ISI:000376417400001, title = {Conformational energy landscape of the ritonavir molecule}, journal = {Journal of Physical Chemistry B}, volume = {120}, number = {19}, year = {2016}, month = {MAY}, pages = {4331-4340}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Conformational polymorphism of ritonavir, a well-known pharmaceutical drug, is intricately linked to its efficacy in the treatment of acquired immunodeficiency syndrome (AIDS). Polymorphic transition from the crystalline form I to form II leads to the loss of bioactivity. The constituent ritonavir molecules adopt a trans configuration about the carbamate torsion angle in the form I crystal, and a cis configuration in the form II crystal. Investigating the energetics and mechanistic features of conformational transitions at the single molecule level is a key step toward decoding the complex features of the solid state polymorphism. In this work, we employ the energy landscape framework to investigate the conformational transitions of an isolated ritonavir molecule. The landscape is explored using discrete path sampling (DPS) and visualized in terms of disconnectivity graphs. We identify two distinct funnels corresponding to the two molecular forms that are identified by crystallography. The two regions can be reliably distinguished using the carbamate torsion angle, and the corresponding interconversion rates are predicted to follow Arrhenius behavior. The results provide mechanistic insight into pathways for cis \<-\> trans interconversion at the molecular level and may also help in elucidating the polymorphic transitions in the crystal state.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b12272}, author = {Chakraborty, Debayan and Sengupta, Neelanjana and Wales, David J.} } @article {43006, title = {Copolymers comprising monomers with various dipole and quadrupole as active material in organic field effect transistors}, journal = {Journal of Physical Chemistry C}, volume = {120}, year = {2016}, month = {NOV}, pages = {26199-26205}, abstract = {

Copolymers of 4,4-difluoro-4-borata-3a-azonia-4a-aza-s-indacene (BODIPY) and diketopyrrolopyrrole (DPP) were synthesized. The BODIPY has a permanent dipole and the DPP has a quadrupole. The dipole and the quadrupole in the monomers are expected to bring the polymers closer and to improve the charge-transport properties. By judicious choice of these monomers, the electron wave function is evenly distributed through the molecules. However, we notice that the torsional angle at the connecting point of BODIPY and DPP is a function of the methyl moieties at the beta,beta{\textquoteright} position of the BODIPY. We found that the polymer comprising DPP and BODIPY without methyl moiety at beta,beta{\textquoteright} position showed a torsional angle of 27, the lowest among the three polymers studied in this work. The absorption spectrum of the polymer showed transitions because of vibronic coupling indicating linearity along the polymer backbone. The band gap of the polymer was found to be 1.2 eV. The thermally stable polymer showed an ambipolar charge transport of 0.01 cm(2)/(V s).

}, doi = {10.1021/acs.jpcc.6b08225}, author = {Singh, Saumya and Chithiravel, Sundaresan and Krishnamoorthy, Kothandam} } @article { ISI:000375631300006, title = {Correlating Nitrile IR frequencies to local electrostatics quantifies noncovalent interactions of peptides and proteins}, journal = {Journal of Physical Chemistry B}, volume = {120}, number = {17}, year = {2016}, month = {MAY}, pages = {4034-4046}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Noncovalent interactions, in particular the hydrogen bonds and nonspecific long-range electrostatic interactions are fundamental to biomolecular functions. A molecular understanding of the local electrostatic environment, consistently for both specific (hydrogen-bonding) and nonspecific electrostatic (local polarity) interactions, is essential for a detailed understanding of these processes. Vibrational Stark Effect (VSE) has proven to be an extremely useful method to measure the local electric field using infrared spectroscopy of carbonyl and nitrile based probes. The nitrile chemical group would be an ideal choice because of its absorption in an infrared spectral window transparent to biomolecules, ease of site-specific incorporation into proteins, and common occurrence as a substituent in various drug molecules. However, the inability of VSE to describe the dependence of IR frequency on electric field for hydrogen-bonded nitriles to date has severely limited nitrile{\textquoteright}s utility to probe the noncovalent interactions. In this work, using infrared spectroscopy and atomistic molecular dynamics simulations, we have reported for the first time a linear correlation between nitrile frequencies and electric fields in a wide range of hydrogen-bonding environments that may bridge the existing gap between VSE and H-bonding interactions. We have demonstrated the robustness of this field-frequency correlation for both aromatic nitriles and sulfur-based nitriles in a wide range of molecules of varying size and compactness, including small molecules in complex solvation environments, an amino acid, disordered peptides, and structured proteins. This correlation, when coupled to VSE, can be used to quantify noncovalent interactions, specific or nonspecific, in a consistent manner.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.6b02732}, author = {Deb, Pranab and Haldar, Tapas and Kashid, Somnath M. and Banerjee, Subhrashis and Chakrabarty, Suman and Bagchi, Sayan} } @article { ISI:000367840400003, title = {Crosslinked polymer embedded Cu/Ag for comparative drug adsorption and kinetics evaluation}, journal = {International Journal of Polymeric Materials and Polymeric Biomaterials}, volume = {65}, number = {6}, year = {2016}, month = {JAN}, pages = {285-293}, publisher = {TAYLOR \& FRANCIS AS}, address = {KARL JOHANS GATE 5, NO-0154 OSLO, NORWAY}, abstract = {

Two-dimensional crosslinked polymer (2-DCP) was synthesized for evaluation of drug adsorption and kinetics thereof. Further, polymer properties were evaluated and parameters such as contact time and adsorption isotherm were also studied. Herein, contact time demonstrated 83\% and 85\% of drug loading in an acidic medium for two-dimensional crosslinked polymer embedded copper and silver (2-DCP-Cu/Ag), respectively in 24h. Initial 4h is the exponential drug loading period whereas drug loading was increased gradually after 4h. Salbutamol loading was well-fitted to Langmuir adsorption isotherm, which indicated a monolayer drug adsorption with respect to 2-DCP-Cu/Ag. Pseudo first- and pseudo second-order kinetics was evaluated to perceive the drug adsorption mechanism and equilibrium adsorption capacity. Monolayer drug adsorption with chemisorption mechanism was observed for 2-DCP-Cu/Ag. In addition to this, decomposition temperature of polymer was 440 and 325 degrees C while glass transition temperature of polymer was 280 and 200 degrees C before and after metal modification, respectively. (A=aqueous phase; B=organic phase; C=drug solution; D=drug loaded polymer; E=enlarged drug loaded polymer.) [GRAPHICS] .

}, keywords = {Adsorption isotherm, adsorption kinetics, crosslink polymer, drug loading, langmuir adsorption isotherm, salbutamol}, issn = {0091-4037}, doi = {10.1080/00914037.2015.1119684}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article {43622, title = {Cutaneous exposure to clinically-relevant pigeon pea (Cajanus cajan) proteins promote T(H)2-dependent sensitization and IgE-mediated anaphylaxis in Balb/c mice}, journal = {Journal of Immunotoxicology}, volume = {13}, year = {2016}, month = {JAN}, pages = {827-841}, abstract = {Epicutaneous (EC) sensitization to food allergens may occur when the skin has been lightly damaged. The study here tested whether cutaneous exposure to pigeon pea protein(s) may cause allergic sensitization. BALB/c mice were either orally gavaged or epicutaneously sensitized by repeated application of pigeon pea crude protein extract (CPE) on undamaged areas of skin without any adjuvant; afterwards, both groups were orally challenged with the pigeon pea CPE. Anaphylactic symptoms along with measures of body temperature, MCPT-1, TSLP, pigeon pea-specific IgE and IgG(1), myeloperoxidase (MPO) activity, T(H)2 cytokines, T(H)2 transcription factors (TFs) and filaggrin expression were determined. Mast cell staining, eosinophil levels and histopathological analysis of the skin and intestines were also performed. In the epicutaneously-sensitized mice, elevated levels of specific IgE and IgG(1), as well as of MCPT-1, TSLP, T(H)2 cytokines and TFs, higher anaphylactic scores and histological changes in the skin and intestine were indicative of sensitization ability via both routes in the pigeon pea CPE-treated hosts. Elevated levels of mast cells were observed in both the skin and intestine; increased levels of eosinophils and MPO activity were noted only in the skin. Decreased levels of filaggrin in skin may have played a key role in the skin barrier dysfunction, increasing the chances of sensitization. Therefore, the experimental data support the hypothesis that in addition to oral exposure, skin exposure to food allergens can promote T(H)2-dependent sensitization, IgE-mediated anaphylaxis and intestinal changes after oral challenge. Based on this, an avoidance of cutaneous exposures to allergens might prevent development of food anaphylaxis.}, doi = {10.1080/1547691X.2016.1205159}, author = {Gupta, Rinkesh Kumar and Kumar, Sandeep and Gupta, Kriti and Sharma, Akanksha and Roy, Ruchi and Verma, Alok Kumar and Chaudhari, Bhushan P. and Das, Mukul and Ansari, Irfan Ahmad and Dwivedi, Premendra D.} } @article {43405, title = {Cysteine-specific fluorescent switch for monitoring oxidative stress and quantification of aminoacylase-1 in blood serum}, journal = {Analytical Chemistry}, volume = {88}, year = {2016}, month = {DEC}, pages = {12161-12168}, doi = {10.1021/acs.analchem.6b03066}, author = {Anila, H. A. and Ali, Firoj and Kushwaha, Shilpi and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article {45849, title = {Data of in vitro synthesized dsRNAs on growth and development of helicoverpa armigera}, journal = {Data in Brief}, volume = {7}, year = {2016}, month = {JUN}, pages = {1602-1605}, type = {Article}, abstract = {The data presented in this article is related to the research article "RNAi of selected candidate genes interrupts growth and development of Helicoverpa armigera" (Chikate et al., 2016) [1]. RNA interference (RNAi) is emerging as a potent insect pest control strategy over current methods and their resistance by pest. In this study we tested 15 different in vitro synthesized dsRNAs for gene silencing in Helicoverpa armigera. These dsRNAs were specific against H. armigera enzymes/proteins such as proteases like trypsins (HaTry2, 3, 4 and 6), chymotrypsin (HaChy4) and cysteine proteases such as cathepsin (HaCATHL); glutathione S-transferases (HaGST1a, 6 and 8); esterases (HaAce4, HaJHE); catalase (HaCAT); super-oxide-dismutase (HaCu/ZnSOD); fatty acid binding protein (HaFabp) and chitin deacetylase (HaCda5b). These dsRNAs were fed to second instar larvae at an optimized dose (60 μg/day) for 3 days separately. Effects of dsRNA feeding were observed in terms of larval mass gain, percentage mortality and phenotypic abnormalities in later developmental stages of H. armigera. These findings might provide potential new candidates for designing sequence-specific dsRNA as pesticide in crop protection. }, doi = {10.1016/j.dib.2016.04.026}, author = {Chikate, Y. R. and Dawkar, V. V. and Barbole, R. S. and Tilak, P. V. and Gupta, V. S. and Giri, A. P.} } @article {45850, title = {Data on changes in the fatty acid composition during fruit development and ripening of three mango cultivars (Alphonso, Pairi and Kent) varying in lactone content}, journal = {Data in Brief}, volume = {9}, year = {2016}, month = {DEC}, pages = {480-491}, type = {Article}, abstract = {Data in this article presents fatty acid composition of three mango cultivars; Alphonso, Pairi and Kent through fruit development and ripening. Change in the ω-6 and ω-3 fatty acids level during mango fruit development and ripening is depicted. Also, data on aroma volatile {\textquoteleft}lactones{\textquoteright} composition from pulp and skin tissues of these cultivars at their ripe stage, respectively is provided. Statistical data is also shown, which correlates modulation in lactone content with that of fatty acid composition and content during fruit development and ripening in all the three mango cultivars.}, doi = {10.1016/j.dib.2016.09.018}, author = {Deshpande, A. B. and Chidley, H. G. and Oak, P. S. and Pujari, K. H. and Giri, A. P. and Gupta, V. S.} } @article {43623, title = {Design and fabrication of mechanically strong nano-matrices of linseed oil based polyesteramide blends}, journal = {Medchemcomm}, volume = {7}, year = {2016}, month = {SEP}, pages = {2299-2308}, abstract = {New nanomaterials of bio-origin with improved mechanical properties are in demand for biomedical application. Therefore, we propose to design and fabricate bioactive nano-matrices with good mechanical strength using polyesteramides derived from linseed oil. Polyesteramide was synthesized from linseed oil and blended with poly(L-lactide) and human serum albumin to enhance the mechanical strength, biodegradation, biocompatibility and hydrophilicity. The various blend solutions with and without drugs (triclosan and metronidazole) were electrospun into non-woven nano-matrices. The morphology of the nano-matrices represented smooth and fine nanofibers with the diameter ranging from 300 to 400 nm. Drug binding efficiency, cytotoxicity, hydrophilicity, thermal and mechanical studies indicated their suitability as biomaterials. To demonstrate their utility, the drug release kinetics and antibacterial properties were evaluated. The metronidazole loaded nano-matrices showed drug release up to 8 h, beyond which no release was observed until 72 h. Antibacterial studies were done using the drugs triclosan and metronidazole. The antibacterial activity of the drug loaded nanofiber mats increased with the increase in drug concentration. The uniqueness of the developed nano-matrices of polyesteramide blends is that their mechanical strength is 3-fold higher than that of the nano-matrices of poly(L-lactide), which is one of the essential features of these nano-matrices to be used as a biomaterial for biomedical applications.}, doi = {10.1039/c6md00380j}, author = {Killi, Naresh and Dhakare, Runali Arjun and Singam, Amarnath and Lokanadham, Metta and Chitikeshi, Harshavardhan and Gundloori, Rathna Venkata Naga} } @article { ISI:000370450600006, title = {Diastereoselective synthesis of beta-ether derivatives of artemisinin, an antimalarial drug: the effect of nitrile on stereoselectivity}, journal = {Asian Journal of Organic Chemistry}, volume = {5}, number = {2}, year = {2016}, month = {FEB}, pages = {201-206}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Malaria is a life-threatening disease affecting a major portion of the world{\textquoteright}s population with considerable loss of human life. Artemisinin, isolated from Artemisia annua, its oil- and water-soluble derivatives, and other known antimalarials are recommended for artemisinin combination therapy by the World Health Organization. We have established a method for the stereoselective synthesis of beta-ether derivatives of dihydroartemisinin in high yield and high diastereoselectivity. The reaction either in acetonitrile or dichloromethane/trichloroacetonitrile (6:1) mixtures at 0 degrees C or room temperature, respectively, furnished the antimalarial drugs artemether 3 or arteether 4 in high yield with a high diastereomeric ratio. The effect the nitrile has on the yield and stereoselectivity is mechanistically explained.

}, keywords = {antimalarials, arteethers, artemisinin, nitriles, trichloroacetimidates}, issn = {2193-5807}, doi = {10.1002/ajoc.201500415}, author = {Chand, Hemender R. and Bhattacharya, Asish K.} } @article { ISI:000372848000021, title = {Disruption of native beta-turns: consequence of folding competition between native and orthanilic acid proline-based pseudo beta-turn}, journal = {European Journal of Organic Chemistry}, number = {7}, year = {2016}, month = {MAR}, pages = {1380-1388}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Five tetrapeptides comprising beta-turn-forming elements and a pseudo beta-turn (C9 H-bonding) based on an SAntPro (orthanilic acid - proline) motif were designed and synthesized. Their extensive conformational investigation by single-crystal X-ray crystallography, solution-state 2D NMR spectroscopic, and nOe-restrained MD simulation studies revealed the formation of C14 or C9 folding and disruption of the native beta-turn (C10 H-bonding) architecture. The striking difference between the psi(psi(2)) angle of {\textquoteleft}{\textquoteleft}i + 2{\textquoteright}{\textquoteright} residues of native beta-turn and designed peptides suggest that formation of the native beta-turn is not favored. The results suggest that other turn-forming motifs can dramatically modulate the stability of the native beta-turn structure.

}, keywords = {Conformation analysis, hydrogen bonds, Peptidomimetics, structure elucidation}, issn = {1434-193X}, doi = {10.1002/ejoc.201501558}, author = {Ingole, Tukaram S. and Vijayadas, Kuruppanthara N. and Chaitanya, K. N. and Kotmale, Amol S. and Gawade, Rupesh L. and Gonnade, Rajesh G. and Rajamohanan, P. R. and Sanjayan, Gangadhar J.} } @article {43593, title = {Effect of heterocycles on field-effect transistor performances of donor-acceptor-donor type small molecules}, journal = {Chemical Physics Letters}, volume = {661}, year = {2016}, month = {SEP}, pages = {107-113}, abstract = {Two D-A-D small molecules comprising triphenylamine and diketopyrrolopyrrole were synthesized having either furan or thiophene connected to the fused lactam ring. In this design, furan/thiophene diketopyrrolopyrrole acts as an acceptor and triphenylamine acts as a donor. Propeller shaped triphenylamine has its effect on packing, processability and plays a vital role in determining the pi-pi molecular orbital stacking in such compounds and thus the mobility of charge carriers. With TDPPT and FDPPT, maximum hole carrier mobility obtained is 2.88 x 10(-3) cm(2) V-1 s(-1) and 1.60 x 10(-3) cm(2) V-1 s(-1), respectively using bottom gate bottom contact field-effect transistor. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cplett.2016.08.073}, author = {Chini, Mrinmoy Kumar and Mahale, Rajashree Y. and Chatterjee, Shyambo} } @article {43039, title = {Effect of polyvinylpyrrolidone at methane hydrate-liquid water interface. application in flow assurance and natural gas hydrate exploitation}, journal = {Fuel}, volume = {186}, year = {2016}, month = {DEC}, pages = {613-622}, doi = {10.1016/j.fuel.2016.09.004}, author = {Choudhary, Nilesh and Das, Subhadip and Roy, Sudip and Kumar, Rajnish} } @article { ISI:000371139400018, title = {Effect of sequence on the ionization of guanine in DNA}, journal = {Physical Chemistry Chemical Physics}, volume = {18}, number = {9}, year = {2016}, month = {MAR}, pages = {6526-6533}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The accurate estimation of the ionization energies and understanding the nature of the ionized states of the nucleic acid bases (NABs) are crucial to the understanding of the DNA damage mechanism. The vertical ionization energy (VIE) of guanine is the lowest among the NABs and the ionization energies are strongly affected by the environment, such as solvation and characteristics of nearby NABs. Therefore, we investigate the sequence dependence of the VIEs of guanine in B-DNA. We use the equation of motion coupled cluster method for the estimation of ionization potential with single and double excitations (EOM-IP-CCSD) and density functional theory with dispersion corrected omega B97x-D for the estimation of VIEs. A significant amount of non-additivity or cooperativity, directly proportional to charge delocalization, is noticed in the change in VIE due to the interaction with the nearby NABs. While the change in VIE due to base pairing originates predominantly from charge-dipole interactions, stacking between base pairs is a more complicated balance of dispersion and charge-dipole interactions as well as stabilization due to the delocalization of the positive charge. The long range interactions are however dominated by 1/r(3) distance dependence which shows the major role played by charge-dipole interactions. The extent of localization of positive holes on guanine is also estimated for various sequences.

}, issn = {1463-9076}, doi = {10.1039/c5cp07804k}, author = {Chakraborty, Rahul and Ghosh, Debashree} } @article { ISI:000376417400010, title = {Effect of solvation on electron detachment and excitation energies of a green fluorescent protein chromophore variant}, journal = {Journal of Physical Chemistry B}, volume = {120}, number = {19}, year = {2016}, month = {MAY}, pages = {4410-4420}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Hybrid quantum mechanics/molecular mechanics (QM/MM) is applied to the fluorinated green fluorescent protein (GFP) chromophore (DFHBDI) in its deprotonated form to understand the solvatochromic shifts in its vertical detachment energy (VDE) and vertical excitation energy (VEE). This variant of the GFP chromophore becomes fluorescent in an RNA environment and has a wide range of applications in biomedical and biochemical fields. From microsolvation studies, we benchmark (with respect to full QM) the accuracy of our QM/MM calculations with effective fragment potential (EFP) as the MM method of choice. We show that while the solvatochromic shift in the VEE is minimal (0.1 eV blue shift) and its polarization component is only 0.03 eV, the effect of the solvent on the VDE is quite large (3.85 eV). We also show by accurate calculations on the solvatochromic shift of the VDE that polarization accounts for similar to 0.23 eV and therefore cannot be neglected. The effect of the counterions on the VDE of the deprotonated chromophore in solvation is studied in detail, and a charge-smearing scheme is suggested for charged chromophores.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.6b03723}, author = {Bose, Samik and Chakrabarty, Suman and Ghosh, Debashree} } @article {45648, title = {Effect of the amino acid L-histidine on methane hydrate growth kinetics}, journal = {Journal of Natural Gas Science and Engineering}, volume = {35}, year = {2016}, month = {SEP}, pages = {1453-1462}, type = {Article}, abstract = {

In the present study, the effect of a polar amino acid, L-histidine on methane hydrate growth kinetics has been investigated. Methane hydrate formation experiments were carried out in a stirred tank reactor setup at pressure and temperature conditions of 274.15 K and 5.0 MPa respectively. Two different concentrations (0.1 and 1 wt \%) of L-histidine were studied. Hydrate growth through molecular dynamic (MD) simulation was also studied; pressure and temperature conditions for the simulations were set at 10.0 MPa and 270.0 K, while the concentration of L-histidine was kept fixed at 0.94 wt \%. Hydrate formation runs using MD simulation were carried out with optimal concentration of methane in water. The presence of L-histidine in the system was found to significantly enhance methane hydrate growth kinetics as compared to pure water for both experimental and MD simulation runs. Final gas consumption with 1 wt \% L-histidine was found to be comparable to that with 1 wt \% SDS, the most commonly used additive for hydrate promotion studies. L-histidine is a benign additive which offers considerable enhancement in methane hydrate formation kinetics and can be utilized for various hydrate based technologies such as methane storage and transport. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Amino acid, Crystal growth, Gas hydrate, kinetics, Molecular dynamic simulation}, issn = {1875-5100}, doi = {10.1016/j.jngse.2016.05.052}, author = {Bhattacharjee, Gaurav and Choudhary, Nilesh and Kumar, Asheesh and Chakrabarty, Suman and Kumar, Rajnish} } @article { ISI:000382587400004, title = {Encapsulation of yeast (Saccharomyces cereviciae) by spray drying for extension of shelf life}, journal = {Drying Technology}, volume = {34}, number = {11}, year = {2016}, month = {JAN}, pages = {1307-1318}, publisher = {TAYLOR \& FRANCIS INC}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

The objective of the present work was to encapsulate yeast using different carrier materials and examine their efficacy in retaining viability of cells after spray drying. Slurry containing yeast cells along with known amount of carrier material (maltodextrin, corn starch, gum arabic, acacia gum, polyethylene glycol 8000, -cyclodextrin, and skimmed milk powder, one at a time) was added and served as feed. Among these carrier materials attempted, corn starch and maltodextrin showed the best results with respect to powder yield (59\%, w/w) and cell survival (80.5\%), respectively. However, considering both survival and powder yield (67 and 59\% w/w, respectively), corn starch was observed to be the most suitable carrier material.

}, keywords = {Cell viability, Encapsulation, freeze-drying, spray drying, Yeast}, issn = {0737-3937}, doi = {10.1080/07373937.2015.1112808}, author = {Chandralekha, A. and Tavanandi, A. Hrishikesh and Amrutha, N. and Hebbar, H. Umesh and Raghavarao, K. S. M. S. and Gadre, Ramchandra V.} } @article {43336, title = {Enhanced electrochemical performance of polypyrrole coated MoS2 nanocomposites as electrode material for supercapacitor application}, journal = {Journal of Electroanalytical Chemistry}, volume = {782}, year = {2016}, month = {DEC}, pages = {278-287}, abstract = {Binary nanocomposites of polypyrrole (PPY) and Molybdenum disulfide (MoS2), with varying weight\% of MoS2 viz. MP1, MP2, and MP3 corresponding to 12.5, 25, and 50\% of MoS2 respectively, were prepared via. in-situ polymerization method. X-ray diffraction (XRD), field emission scanning microscopy (FESEM), and transmission electron microscopy (TEM) were employed to study the structure and morphology of the prepared nanocomposites. The electrochemical properties were studied by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) techniques. The nanocomposite electrode material MP2 reached a specific capacitance of 400 F/g at the current density 1 A/g which was higher than that of pure PPY and the other two nanocomposites viz. MP1 and MP3 having different compositions of MoS2 and PPY than that of MP2. It was noteworthy that the maximum capacitance value was obtained only for an optimum dose of MoS2 (MP2 in this case with 25\% of MoS2) and any deviation from which ultimately degraded the capacitive performance of the nanocomposite electrode material. This could be attributed to the occurrence of maximum interaction between MoS2 and PPY in the nanocomposite only at a particular concentration of its host materials. The results showed that the specific capacitance of MP2 nanocomposite declined by 7.2\% after 5000 cycles. Further, MP2 nanocomposite electrode showed much higher energy density (8.88 Wh/kg) as well as power density (2286 W/kg) which were higher than that shown by PPY electrode. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jelechem.2016.10.050}, author = {Thakur, Anukul K. and Choudhary, Ram Bilash and Majumder, Mandira and Gupta, Govind and Shelke, Manjusha V.} } @article { ISI:000368191100026, title = {Enhanced nucleation of polypropylene by metal-organic frameworks (MOFs) based on aluminium dicarboxylates: influence of structural features}, journal = {RSC Advances}, volume = {6}, number = {3}, year = {2016}, month = {DEC}, pages = {1907-1912}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Metal-organic frameworks (MOFs) based on aluminium dicarboxylates provide a new platform for the enhanced nucleation of isotactic polypropylene (iPP). For instance, aluminium dicarboxylates exhibit a unique butterfly-like structure similar to that of carboxylate-alumoxanes and correlates well with the nucleation characteristics of iPP. A subtle change in the structure of the ligand backbone (fumarate/succinate) does not alter the framework structure despite changing the hydrophilic/hydrophobic character and its subsequent nucleation characteristics. This suggests that the nucleating agent should facilitate favourable interaction with hydrophobic iPP for efficient nucleation. Further, a systematic variation of the alkyl chain length in the Al-dicarboxylate does not change the nucleation efficiency considerably, even though it increases the distance between the octahedral alumina chains in the metal-organic framework, suggesting that the butterfly-like structure present in the framework is a key aspect for nucleation. Finally, the significance of the orientational conformation of the dicarboxylate around the metal centre for the nucleation is confirmed by the poor nucleation efficiency of chromium and zirconium suberate MOFs where the orientation of suberate would be different from that of aluminium suberate due to the difference in the ligation of the carboxylate group. The present work thus provides valuable pathways for developing new nucleating agents based on MOFs with appropriate selection and orientation of the organic linkers around the metal centre.

}, issn = {2046-2069}, doi = {10.1039/c5ra22764j}, author = {Mani, Mohan Raj and Chellaswamy, Ramesh and Marathe, Yogesh N. and Pillai, Vijayamohanan K.} } @article {43571, title = {ESP promoted "on water" click reaction: a highly economic and sustainable protocol for 1,4-disubstituted-1H-1,2,3-triazole synthesis at room temperature}, journal = {Chemistryselect}, volume = {1}, year = {2016}, month = {NOV}, pages = {6016-6019}, abstract = {A highly economic and green protocol for azide-alkyne cyclo-addition reactions in water has been developed which offers a mild, practical and inexpensive basic alternative to the conventional protocols. The protocol uses readily available, considered as waste material, Egg Shell Powder (ESP) as an additive for CuAAC reaction. The reactions proceeded in water in presence of this basic waste material derived additive under {\textquoteright}external base/ligand/reducing agent/organic solvent{\textquoteright} free conditions affording good to excellent yields of the desired products.}, doi = {10.1002/slct.201601267}, author = {Konwar, Manashjyoti and Ali, Abdul A. and Chetia, Mitali and Saikia, Prakash J. and Khupse, Nageshwar D. and Sarma, Diganta} } @article { ISI:000378508900020, title = {Experimental and computational analysis of supramolecular motifs involving C-sp2(aromatic)-F and CF3 groups in organic solids}, journal = {New Journal of Chemistry}, volume = {40}, number = {6}, year = {2016}, month = {JUN}, pages = {4981-5001}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A detailed experimental (SCXRD) and theoretical (PIXEL and QTAIM) investigation of the evolution of different supramolecular motifs formed via the presence of both C(sp(2))/(sp(3))-F groups in the crystal packing has been performed in a series of newly synthesized substituted benzanilides (containing {\textquoteleft}{\textquoteleft}both{\textquoteright}{\textquoteright} the fluorine and the trifluoromethyl group in the same molecule) along with previously reported similarly related crystal structures [CrystEngComm, 2008, 10, 54-67; CrystEngComm, 2012, 14, 1972-1989, CrystEngComm, 2013, 15, 3711-3733]. It was observed that the highest stabilized molecular motifs primarily consist of C(sp(2))-H center dot center dot center dot F-C(sp(2)) H-bonds in preference to C(sp(2))-H center dot center dot center dot F-C(sp(3)) H-bonds in the crystal. The motifs involving C(sp(2))-H center dot center dot center dot F-C(sp(2))/(sp(3)) H bonds were observed to be present over the entire distance range between 2.2 and 2.7 angstrom, albeit the difference in energies of stabilization involving fluorine atoms attached to sp(2) and sp(3) carbon is not significant in molecular crystals. From QTAIM analysis, the C(sp(2))/(sp(3))-F center dot center dot center dot F-C(sp(2))/(sp(3)) interactions were observed to be a closed shell in nature and provide local stabilization, indicating the formation of bonds, similar to weak hydrogen bonds observed in crystals.

}, issn = {1144-0546}, doi = {10.1039/c5nj03211c}, author = {Panini, Piyush and Gonnade, Rajesh G. and Chopra, Deepak} } @article { ISI:000377515200041, title = {Exploration of the diastereoselectivity in an unusual Grignard reaction and its application towards the synthesis of styryl lactones 7-epi-(+)-goniodiol and 8-epi-(-)-goniodiol}, journal = {RSC Advances}, volume = {6}, number = {56}, year = {2016}, month = {MAY}, pages = {50721-50725}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An unusual diastereoselective Grignard reaction is explored, where the Grignard reagents are derived from 1,n-dihaloalkanes. A steric bias due to the presence of a quaternary centre adjacent to the acetonide ester at the benzylic position is responsible for the formation of an intramolecularly reduced product in almost quantitative yield. This steric hindrance is responsible for the diastereoselectivity observed with a variety of aromatic as well as aliphatic esters. The unusual Grignard reaction furnishes long chain secondary alcohols possessing a terminal olefin, which are synthetically important intermediates. As an application of this method, the diastereoselective synthesis of styryl lactones viz. 7-epi-(+)-goniodiol (29) and 8-epi(-)-goniodiol (30) has been achieved.

}, issn = {2046-2069}, doi = {10.1039/c6ra03192g}, author = {Chavan, Subhash P. and Khatod, Harshali S. and Das, Tamal and Vanka, Kumar} } @article { ISI:000381418000086, title = {Exploration of the presence of bulk-like water in AOT reverse micelles and water-in-oil nanodroplets: the role of charged interfaces, confinement size and properties of water}, journal = {Physical Chemistry Chemical Physics}, volume = {18}, number = {31}, year = {2016}, month = {AUG}, pages = {21767-21779}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The properties of water in a confined environment can be drastically different than the bulk water. In a confined system, e.g. the interior of a reverse micelle, there exist at least two distinct regions namely {\textquoteleft}{\textquoteleft}interfacial water{\textquoteright}{\textquoteright} characterized by markedly slower dynamics, and {\textquoteleft}{\textquoteleft}core water{\textquoteright}{\textquoteright}, which may resemble bulk water for a larger size of the water pool. Using atomistic molecular dynamics simulations, we systematically investigate the presence of bulk-like water in AOT reverse micelles (RMs) with varying size given by w(0) = [H2O]/[AOT] = 10, 15 and 20. In order to understand the effect of the negatively charged interface of the RM, we have performed control studies for the model systems of water-in-oil (isooctane) nanodroplets with the same size of the water pool as the RM systems. In order to quantify the deviations from bulk-like behavior, we have used three kinds of structural order parameters, namely (i) number density to probe the local translational ordering, (ii) tetrahedral order and hydrogen bond distribution to probe the local orientational ordering, and (iii) dipolar orientation relative to the radial vector to capture the global orientational ordering of the water dipoles. We demonstrate that the size of the {\textquoteleft}{\textquoteleft}core water{\textquoteright}{\textquoteright} region that resembles bulk water decreases in the above order, i.e. orientational order parameters of water molecules are perturbed by the charged interface to a larger length scale as compared to the translational order. We have compared the translational and rotational dynamics of the water molecules for the interfacial and core regions to find that the slower dynamics persists even for the core water for the size range that we have studied although to a much lesser extent as compared to the interfacial water. Moreover, we demonstrate that the hydrophobic interface in the water-in-oil nanodroplets has a much weaker effect on the structure and dynamics of the confined water molecules as compared to the anionic RMs. Thus, the major contribution towards the structural ordering and slow dynamics of water in a charged RM system would originate from the strong electrostatic and hydrogen bonded interactions with the interface, and not due to the spatial confinement effect.

}, issn = {1463-9076}, doi = {10.1039/c6cp04378j}, author = {Hande, Vrushali R. and Chakrabarty, Suman} } @article { ISI:000368829000007, title = {Expression of proteins involved in digestion and detoxification are regulated in helicoverpa armigera to cope up with chlorpyrifos insecticide}, journal = {Insect Science}, volume = {23}, number = {1}, year = {2016}, month = {FEB}, pages = {68-77}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Helicoverpa armigera is a key pest in many vital crops, which is mainly controlled by chemical strategies. To manage this pest is becoming challenging due to its ability and evolution of resistance against insecticides. Further, its subsequent spread on nonhost plant is remarkable in recent times. Hence, decoding resistance mechanism against phytochemicals and synthetic insecticides is a major challenge. The present work describes that the digestion, defense and immunity related enzymes are associated with chlorpyrifos resistance in H. armigera. Proteomic analysis of H. armigera gut tissue upon feeding on chlorpyrifos containing diet (CH) and artificial diet (AD) using nano-liquid chromatography-mass spectrometry identified upregulated 23-proteins in CH fed larvae. Database searches combined with gene ontology analysis revealed that the identified gut proteins engrossed in digestion, proteins crucial for immunity, adaptive responses to stress, and detoxification. Biochemical and quantitative real-time polymerase chain reaction analysis of candidate proteins indicated that insects were struggling to get nutrients and energy in presence of CH, while at the same time endeavoring to metabolize chlorpyrifos. Moreover, we proposed a potential processing pathway of chlorpyrifos in H. armigera gut by examining the metabolites using gas chromatography-mass spectrometry. H. armigera exhibit a range of intriguing behavioral, morphological adaptations and resistance to insecticides by regulating expression of proteins involved in digestion and detoxification mechanisms to cope up with chlorpyrifos. In these contexts, as gut is a rich repository of biological information; profound analysis of gut tissues can give clues of detoxification and resistance mechanism in insects.

}, keywords = {chlorpyrifos, Helicoverpa armigera, insecticide resistance, proteomics, real-time PCR}, issn = {1672-9609}, doi = {10.1111/1744-7917.12177}, author = {Dawkar, Vishal V. and Chikate, Yojana R. and More, Tushar H. and Gupta, Vidya S. and Giri, Ashok P.} } @article {43610, title = {F and CF3 substituted solution processable oligo para-phenylenevinylene for ambipolar and hole-transporting organic field effect transistors}, journal = {Chemical Physics Letters}, volume = {657}, year = {2016}, month = {JUL}, pages = {26-32}, abstract = {We have synthesized benzotrifluoromethyl group substituted para-phenylenevinylene oligomer (denoted as PI) and a cooligomer (denoted as PII) by Gilch polymerization route. The ambipolar field-effect transistor (FET) material PI shows hole and electron mobility 1 x 10 (4) cm(2) V (1) s (1) and 2 x 10 (5) cm(2) V (1) s (1) respectively. PII shows only hole mobility as high as 0.05 cm(2) V (1) s (1) as p-type material. This work highlights the progress of hole-transporting as well as ambipolar material for para-phenylenevinylene derivatives. The results are enlightened on the basis of presence of electronegative substituents and structural modification of the oligomer backbone. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cplett.2016.05.042}, author = {Chini, Mrinmoy Kumar and Das, Chayanika and Chatterjee, Shyambo} } @article {42998, title = {Fungal mediated kinetic resolution of racemic acetates to (R)-alcohols using fusarium proliferatum}, journal = {Tetrahedron Letters}, volume = {57}, year = {2016}, month = {OCT}, pages = {4563-4567}, abstract = {

Fungal mediated kinetic resolution of seven acyclic/aromatic acetates was achieved using Fusarium proliferatum to furnish (R)-alcohols in high enantiomeric excess (\>95\%). The kinetic resolution was established as one-pot two-step de-esterification/oxidation biocatalytic process. Further, the preparative scale synthesis of (R)-(+)-1-phenylethanol was accomplished through de-esterification/oxidation of (+/-)-1-phenylethyl acetate using the whole cell of F. proliferatum NCIM 1105. (C) 2016 Elsevier Ltd. All rights reserved.

}, doi = {10.1016/j.tetlet.2016.08.084}, author = {Jadhav, Dipesh D. and Patil, Harshal S. and Chaya, Patil S. and Thulasiram, Hirekodathakallu V.} } @article { ISI:000378741200010, title = {Fusarium oxysporum mediates systems metabolic reprogramming of chickpea roots as revealed by a combination of proteomics and metabolomics}, journal = {Plant Biotechnology Journal}, volume = {14}, number = {7}, year = {2016}, month = {JUL}, pages = {1589-1603}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Molecular changes elicited by plants in response to fungal attack and how this affects plant-pathogen interaction, including susceptibility or resistance, remain elusive. We studied the dynamics in root metabolism during compatible and incompatible interactions between chickpea and Fusarium oxysporum f. sp. ciceri (Foc), using quantitative label-free proteomics and NMR-based metabolomics. Results demonstrated differential expression of proteins and metabolites upon Foc inoculations in the resistant plants compared with the susceptible ones. Additionally, expression analysis of candidate genes supported the proteomic and metabolic variations in the chickpea roots upon Foc inoculation. In particular, we found that the resistant plants revealed significant increase in the carbon and nitrogen metabolism; generation of reactive oxygen species (ROS), lignification and phytoalexins. The levels of some of the pathogenesis-related proteins were significantly higher upon Foc inoculation in the resistant plant. Interestingly, results also exhibited the crucial role of altered Yang cycle, which contributed in different methylation reactions and unfolded protein response in the chickpea roots against Foc. Overall, the observed modulations in the metabolic flux as outcome of several orchestrated molecular events are determinant of plant{\textquoteright}s role in chickpea-Foc interactions.

}, keywords = {Chickpea, fusarium oxysporum, Metabolomics, NMR, plant-pathogen interaction, proteomics}, issn = {1467-7644}, doi = {10.1111/pbi.12522}, author = {Kumar, Yashwant and Zhang, Limin and Panigrahi, Priyabrata and Dholakia, Bhushan B. and Dewangan, Veena and Chavan, Sachin G. and Kunjir, Shrikant M. and Wu, Xiangyu and Li, Ning and Rajmohanan, Pattuparambil R. and Kadoo, Narendra Y. and Giri, Ashok P. and Tang, Huiru and Gupta, Vidya S.} } @article { ISI:000371021000006, title = {GAME9 regulates the biosynthesis of steroidal alkaloids and upstream isoprenoids in the plant mevalonate pathway}, journal = {Nature Communications}, volume = {7}, year = {2016}, month = {FEB}, pages = {Article Number: 10654}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

Steroidal glycoalkaloids (SGAs) are cholesterol-derived molecules produced by solanaceous species. They contribute to pathogen defence but are toxic to humans and considered as anti-nutritional compounds. Here we show that GLYCOALKALOID METABOLISM 9 (GAME9), an APETALA2/Ethylene Response Factor, related to regulators of alkaloid production in tobacco and Catharanthus roseus, controls SGA biosynthesis. GAME9 knockdown and overexpression in tomato and potato alters expression of SGAs and upstream mevalonate pathway genes including the cholesterol biosynthesis gene STEROL SIDE CHAIN REDUCTASE 2 (SSR2). Levels of SGAs, C24-alkylsterols and the upstream mevalonate and cholesterol pathways intermediates are modified in these plants. Delta(7)-STEROL-C5(6)-DESATURASE (C5-SD) in the hitherto unresolved cholesterol pathway is a direct target of GAME9. Transactivation and promoter-binding assays show that GAME9 exerts its activity either directly or cooperatively with the SlMYC2 transcription factor as in the case of the C5-SD gene promoter. Our findings provide insight into the regulation of SGA biosynthesis and means for manipulating these metabolites in crops.

}, issn = {2041-1723}, doi = {10.1038/ncomms10654}, author = {Cardenas, Pablo D. and Sonawane, Prashant D. and Pollier, Jacob and Vanden Bossche, Robin and Dewangan, Veena and Weithorn, Efrat and Tal, Lior and Meir, Sagit and Rogachev, Ilana and Malitsky, Sergey and Giri, Ashok P. and Goossens, Alain and Burdman, Saul and Aharoni, Asaph} } @article {42992, title = {Ganglioside GM1 interacts with the serotonin1A receptor via the sphingolipid binding domain}, journal = {Biochimica et Biophysica Acta}, volume = {1858}, year = {2016}, month = {NOV}, pages = {2818-2826}, abstract = {

Glycosphingolipids are minor yet essential components of eukaryotic cell membranes and are involved in a variety of cellular processes. Although glycosphingolipids such as GM1 have been previously reported to influence the function of G protein-coupled receptors (GPCRs), the molecular mechanism remains elusive. In this paper, we have explored the interaction of GM1 with the serotonin1A receptor, an important neurotransmitter receptor that belongs to the GPCR family. To examine the molecular basis of the interaction of GM1 with the serotonin1A receptor, we performed a series of coarse-grain molecular dynamics simulations of the receptor embedded in membrane bilayers containing GM1. Our results show that GM1 interacts with the serotonin1A receptor predominantly at the extracellular loop 1 and specifically at the sphingolipid binding domain (SBD). The SBD motif consists of a characteristic combination of aromatic, basic and turn-inducing residues, and is evolutionarily conserved in case of the serotonin1A receptor. The interaction of the SBD site with GM1 appears to stabilize a {\textquoteright}flip-out{\textquoteright} conformation in which W102 of the extracellular loop 1 flips out from the central lumen of the receptor toward the membrane. The population of the {\textquoteright}flip-out{\textquoteright} conformation is increased in the presence of cholesterol. Our data strongly suggest that a direct interaction between GM1 and the SBD site of the serotonin1A receptor may occur in vivo. In view of the reported role of GM1 and the serotonin1A receptor in neurodegenerative diseases, GM1-receptor interaction assumes significance in the context of malfunctioning of neuronal GPCRs under such conditions.

}, doi = {10.1016/j.bbamem.2016.08.009}, author = {Prasanna, X. and Jafurulla, M. and Sengupta, Durba and Chattopadhyay, Amitabha} } @article { ISI:000371105800005, title = {Glucose-derived porous carbon-coated silicon nanowires as efficient electrodes for aqueous micro-supercapacitors}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, number = {7}, year = {2016}, month = {FEB}, pages = {4298-4302}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In this study, we report on carbon coating of vertically aligned silicon nanowire (SiNWs) arrays via a simple hydrothermal process using glucose as carbon precursor. Using this process, a thin carbon layer is uniformly deposited on the SiNWs. Under optimized conditions, the coated SiNWs electrode showed better electrochemical energy storage capacity as well as exceptional stability in aqueous system as compared to uncoated SiNWs. The as-measured capacitance reached 25.64 mF/cm(2) with a good stability up to 25000 charging/discharging cycles in 1 M Na2SO4 aqueous solution.

}, keywords = {carbon coating, glucose precursor, hydrothermal, microsupercapacitors, silicon nanowires}, issn = {1944-8244}, doi = {10.1021/acsami.5b11240}, author = {Devarapalli, Rami Reddy and Szunerits, Sabine and Coffinier, Yannick and Shelke, Manjusha V. and Boukherroub, Rabah} } @article {45639, title = {Glycopolypeptide-grafted bioactive polyionic complex vesicles (PICsomes) and their specific polyvalent interactions}, journal = {ACS Omega}, volume = {1}, year = {2016}, month = {OCT}, pages = {600-612}, type = {Article}, abstract = {

Glycopolypeptide-based self-assembled nano-/microstructures with surface-tethered carbohydrates are excellent mimics of glycoproteins on the cell surface. To expand the broad repertoire of glycopolypeptide-based supramolecular soft structures such as polymersomes formed via self-assembly of amphiphilic polymers, we have developed a new class of polyionic complex vesicles (PICsomes) with glycopolypeptides grafted on the external surface. Oppositely charged hydrophilic block copolymers of glycopolypeptide(20)-b-poly-L-lysine(100) and PEG(2k)-b-poly-L-glutamate(100) [PEG = poly(ethylene glycol)] were synthesized using a combination of ring-opening polymerization of N-carboxyanhydrides and {\textquoteleft}{\textquoteleft}click{\textquoteright}{\textquoteright} chemistry. Under physiological conditions, the catiomer and aniomer self-assemble to form glycopolypeptide-conjugated PICsomes (GP-PICsomes) of micrometer dimensions. Electron and atomic force microscopy suggests a hollow morphology of the PICsomes, with inner aqueous pool (core) and peripheral PIC (shell) regions. Owing to their relatively large (similar to micrometers) size, the hollowness of the supramolecular structure could be established via fluorescence microscopy of single GP-PICsomes, both in solution and under dry conditions, using spatially distributed fluorescent probes. Furthermore, the dynamics of single PICsomes in solution could be imaged in real time, which also allowed us to test for multivalent interactions between PICsomes mediated by a carbohydrate (mannose)-binding protein (lectin, Con-A). The immediate association of several GP-PICsomes in the presence of Con-A and their eventual aggregation to form large insoluble aggregate clusters reveal that upon self-assembly carbohydrate moieties protrude on the outer surface which retains their biochemical activity. Challenge experiments with excess mannose reveal fast deaggregation of GP-PICsomes as opposed to that in the presence of excess galactose, which further establishes the specificity of lectin-mediated polyvalent interactions of the GP-PICsomes.

}, issn = {2470-1343}, doi = {10.1021/acsomega.6b00142}, author = {Pandey, Bhawana and Mahato, Jaladhar and Cotta, Karishma Berta and Das, Soumen and Sharma, Dharmendar Kumar and Sen Gupta, Sayam and Chowdhury, Arindam} } @article { ISI:000375520100006, title = {Green approach to dye wastewater treatment using biocoagulants}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {4}, number = {5}, year = {2016}, month = {MAY}, pages = {2495-2507}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The present study focuses on newer biocoagulants, bioformulations, and the understanding of coagulant behavior with biocoagulants in relation to chemical coagulants. Newer biocoagulants, seeds of Azadirachta indica (AI) and pads of Acanthocereus tetragonus, are discussed along with two known biocoagulants, Moringa oleifera and Cicer arietinum seeds. Dye removal studies were carried out using widely reported Congo red dye to facilitate easy comparison with other conventional coagulants and the effect of various parameters such as initial dye concentration, pH, coagulant dose, etc. are discussed in detail. The use of biocoagulant was found to be highly effective, and up to 99\% dye removal was achieved for coagulant doses in the range of 300-1500 mg/L. It was also observed that coagulation is pH sensitive, similar to chemical coagulants. Although the biocoagulant dose is relatively higher than the conventional chemical coagulants, a good value for the sludge volume index, similar to 50 mL/g for 1 h and 30 min, respectively, was obtained for the two coagulants, Acanthocereus tetragonus and Moringa oleifera. A very high particle count compared to chemical coagulants was observed using a focused beam reflectance measurement. Bioformulation with chemical coagulants such as alum, ferric, and aluminum based coagulants can, not only lower doses of biocoagulants (up to one-third) but can also result in significant improvement in the coagulation performance, up to 50\% or more.

}, keywords = {coagulation, dye removal, Effluent treatment, flocculation, pollution}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.5b01553}, author = {Chethana, M. and Sorokhaibam, Laxmi Gayatri and Bhandari, Vinay M. and Raja, S. and Ranade, Vivek V.} } @article {42940, title = {GSH Induced controlled release of levofloxacin from a purpose-built prodrug: luminescence response for probing the drug release in escherichia coli and staphylococcus aureus}, journal = {Bioconjugate Chemistry}, volume = {27}, year = {2016}, month = {SEP}, pages = {2062-2070}, abstract = {

Fluoroquinolones are third-generation broad spectrum bactericidal antibiotics and work against both Gram-positive and Gram-negative bacteria. Levofloxacin (L), a fluoroquinolone, is widely used in anti-infective chemotherapy and treatment of urinary tract infection and pneumonia. The main pathogen for urinary tract infections is Escherichia colt, and Streptococcus pneumoniae is responsible for pneumonia, predominantly a lower respiratory tract infection. Poor permeability of L leads to the use of higher dose of this drug and excess drug in the outer cellular fluid leads to central nervous system (CNS) abnormality. One way to counter this is to improve the lipophilicity of the drug molecule, and accordingly, we have synthesized two new Levofloxacin derivatives, which participated in the spatiotemporal release of drug via disulfide bond cleavage induced by glutathione (GSH). Recent studies with Streptococcus mutants suggest that it is localized in epithelial lining fluid (ELF) of the normal lower respiratory tract and the effective [GSH] in ELF is similar to 430 mu M. E. coli typically cause urinary tract infections and the concentration of GSH in porcine bladder epithelium is reported as 0.6 mM for a healthy human. Thus, for the present study we have chosen two important bacteria (Gram + ve and Gram - ve), which are operational in regions having high extracellular GSH concentration. Interestingly, this supports our design of new lipophilic Levofloxacin based prodrugs, which released effective drug on reaction with GSH. Higher lipophilicity favored improved uptake of the prodrugs. Site specific release of the drug (L) could be achieved following a glutathione mediated biochemical transformation process through cleavage of a disulfide bond of these purpose-built prodrugs. Further, appropriate design helped us to demonstrate that it is possible also to control the kinetics of the drug release from respective prodrugs. Associated luminescence enhancement helps in probing the release of the drug from the prodrug in bacteria and helps in elucidating the mechanistic pathway of the transformation. Such an example is scarce in the contemporary literature.

}, doi = {10.1021/acs.bioconjchem.6b00324}, author = {Pal, Suman and Ramu, Vadde and Taye, Nandaraj and Mogare, Devraj G. and Yeware, Amar M. and Sarkar, Dhiman and Reddy, D. Srinivasa and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000370100200012, title = {Highly active bile salt hydrolase from enterococcus faecalis shows positive cooperative kinetics}, journal = {Process Biochemistry}, volume = {51}, number = {2}, year = {2016}, month = {FEB}, pages = {263-269}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Bile salt hydrolase (BSH; cholylglycine hydrolase, EC 3.5.1.24) is an important enzyme that catalyses the deconjugation of bile acids conjugated with glycine or taurine and assists in the reduction of blood cholesterol levels. In the present study, we report the cloning, overexpression and characterisation of BSH gene from a gut-associated microbe Enterococcus faecalis (EfBSH). The overexpressed protein in Escherichia coli was purified to homogeneity. Optimum pH and temperature for activity were found to be 5.0 and 50 degrees C, respectively. The enzyme was considerably stable in the pH range of 5.0-7.0 and at a temperature of up to 50 degrees C. It showed high specific activity of 1390 U mg(-1) and 1289 U mg-1 for substrates such as glycocholic acid (GCA) and glycodeoxycholic acid (GDCA), respectively. The effect of additives on enzyme activity was assessed, and the detergent Triton X showed a marginally enhanced activity. The enzyme demonstrated unique enzyme kinetics of non-linear regression, thereby displaying positive cooperativity. In addition, the modulating effect of the non-substrate ligand Pen V on the hydrolysing ability of EfBSH towards bile acid such as GDCA was measured. It was observed that Pen V significantly enhanced the BSH activity. This is markedly different from the previously reported competitive inhibition of BSH activity by Pen V. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Allosteric regulation, Bile acids, Bile salt hydrolase, Enzyme kinetics, Gut organism, Penicillin V acylase}, issn = {1359-5113}, doi = {10.1016/j.procbio.2015.12.006}, author = {Chand, Deepak and Ramasamy, Sureshkumar and Suresh, C. G.} } @article { ISI:000380362700025, title = {Highly efficient nitrogen-doped hierarchically porous carbon supported Ni nanoparticles for the selective hydrogenation of furfural to furfuryl alcohol}, journal = {RSC Advances}, volume = {6}, number = {72}, year = {2016}, month = {JUL}, pages = {67662-67668}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Nickel nanoparticles supported on nitrogen doped hierarchically porous carbon (Ni/CN) are found to be highly efficient and reusable catalysts for the selective hydrogenation of biomass-derived furfural to furfuryl alcohol (FA). Various characterization methods were used to study the structural and morphological features of the catalysts. Furfural conversion of 96\% and 95\% FA selectivity was obtained using a 5 wt\% Ni/CN catalyst. This catalyst showed excellent recyclability without any loss in activity and FA selectivity when it was reused four times. The higher catalytic performance is attributed to the nitrogen incorporated hierarchical porous 3D carbon network.

}, issn = {2046-2069}, doi = {10.1039/c6ra14078e}, author = {Kotbagi, Trupti V. and Gurav, Hanmant R. and Nagpure, Atul S. and Chilukuri, Satyanarayana V. and Bakker, Martin G.} } @article {45637, title = {Highly stable In-SBA-15 catalyst for vapor phase Beckmann rearrangement reaction}, journal = {Microporous and Mesoporous Materials}, volume = {234}, year = {2016}, month = {NOV }, pages = {293-302}, type = {Article}, abstract = {

The Indium doped SBA-15 material was prepared by sol-gel method and tested for vapor phase Beckman rearrangement reaction. Among three indium loading, In/Si ratio of 2/100 was found as an optimum composition in terms of caprolactam selectivity (100\%) and cyclohexanone oxime conversion (100\%). The catalysts were characterized by N-2 adsorption, small-angle X-rays/neutron scattering (SAXS/SANS), XRD, FESEM, HRTEM, EDX, UV, FTIR and NH3-TPD techniques. In-situ SANS experiment was performed on the adsorption of CO2 to detect the micropores in the mesopore wall. All catalysts samples have highly ordered hexagonal structure with well dispersed indium in the silica matrix. The fine tuning of weak and strong acid sites were found in indium doped SBA-15 (In/Si = 2/100) catalyst. The same catalyst showed optimum catalytic performance, high space time yield 114.4 mol/h/g(cat) and high stability till 6 h of reaction without deactivation. The micro-kinetic analysis showed that there were no external and internal diffusion limitations in the SBA-15 catalyst. The reaction mechanism of Beckmann rearrangement over In-SBA-15 has been elucidated. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {e-Caprolactam, In-situ SANS, indium, SAXS, SBA-15}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2016.07.024}, author = {Kumar, Rawesh and Shah, Sneha and Bahadur, Jitendra and Melnichenko, Yuri B. and Sen, Debasis and Mazumder, S. and Vinod, Chathakudath P. and Chowdhury, Biswajit} } @article { ISI:000376119000058, title = {Hydrogenation of cinnamaldehyde to hydrocinnamaldehyde over Pd nanoparticles deposited on nitrogen-doped mesoporous carbon}, journal = {RSC Advances}, volume = {6}, number = {50}, year = {2016}, month = {APR}, pages = {44333-44340}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Palladium nanoparticles deposited on nitrogen-doped mesoporous carbon (NMC) were synthesized by simple ultrasonic-assisted method. This novel Pd-NMC catalyst was highly active and selective for the hydrogenation of cinnamaldehyde (CA) to hydrocinnamaldehyde (HCA) at room temperature (30 degrees C) under low H-2 pressure. The nitrogen-free mesoporous carbon (MC) and activated carbon (AC) were also employed as the support for Pd in the liquid-phase hydrogenation of CA. The incorporation of nitrogen into carbon matrix remarkably enhanced the catalytic activity and C=C bond hydrogenation selectivity (HCA selectivity of 93\% with 100\% CA conversion for Pd-NMC) in CA hydrogenation compared to the catalysts with no nitrogen (HCA selectivity of 66 and 47\% for Pd-MC and Pd-AC, respectively). Moreover, Pd-NMC catalyst demonstrated an excellent recyclability without any loss in activity and HCA selectivity when it was reused for six times. The superior catalytic performance of Pd-NMC catalyst in CA hydrogenation is attributed to the small size of Pd nanoparticles due to presence of high nitrogen content (11.6 wt\%) and mesoporous nature of NMC support.

}, issn = {2046-2069}, doi = {10.1039/c6ra04154j}, author = {Nagpure, Atul S. and Gurrala, Lakshmiprasad and Gogoi, Pranjal and Chilukuri, Satyanarayana V.} } @article {43052, title = {Impact of modular substitution on crystal packing: the tale of two ureas}, journal = {CrystEngComm}, volume = {18}, year = {2016}, month = {AUG}, pages = { 7078-7094}, doi = {10.1039/C6CE01324D}, author = {Koshti, Vijay S. and Thorat, Shridhar H. and Gote, Ravindra P. and Chikkali, Samir H. and Gonnade, Rajesh G.} } @article {43432, title = {Improved all-polymer solar cell performance of n-type naphthalene diimide-bithiophene P(NDI2OD-T2) copolymer by incorporation of perylene diimide as coacceptor}, journal = {Macromolecules}, volume = {49}, year = {2016}, month = {NOV}, pages = {8113-8125}, abstract = {

Naphthalene diimide-bithiophene P(NDI2OD-T2) is a well-known donor-acceptor polymer, previously explored as n-type material in all-polymer solar cells (all-PSCs) and organic field effect transistor (OFETs) applications. The optical, bulk, electrochemical, and semiconducting properties of P(NDI2OD-T2) polymer were tuned via random incorporation of perylene diimide (PDI) as coacceptor with naphthalene diimide (NDI). Three random copolymers containing 2,2{\textquoteright}-bithiophene as donor unit and varying compositions of naphthalene diimide (NDI) and perylene diimide (xPDI, x = 15, 30, and 50 mol \% of PDI) as two mixed acceptors were synthesized by Stille coupling copolymerization. Proton NMR spectra recorded in CD Cl-3 showed that the pi-pi stacking induced aggregation among the naphthalene units could be successfully disrupted by the random incorporation of bulky PDI units. The newly synthesized random copolymers were investigated as electron acceptors in BHJ all-PSCs, and their performance was compared with P(NDI2OD-T2) as reference polymer. An enhanced PCE of 5.03\% was observed for BHJ all-PSCs (all-polymer solar cells) fabricated using NDI-Th-PDI30 as acceptor and PTB7-Th as donor, while the reference polymer blend with the same donor polymer exhibited PCE of 2.97\% efficiency under similar conditions. SCLC bulk carrier mobility measured for blend devices showed improved charge mobility compared to reference polymer, with PTB7-Th:NDI-Th-PDI30 blend device exhibiting the high hole and electron mobility of 4.2 x 10(-4) and 1.5 x 10(-4) cm(2)/(V s), respectively. This work demonstrates the importance of molecular design via random copolymer strategy to control the bulk crystallinity, compatibility, blend morphology, and solar cell performance of n-type copolymers.

}, doi = {10.1021/acs.macromol.6b01566}, author = {Sharma, Sandeep and Kolhe, Nagesh B. and Gupta, Vinay and Bharti, Vishal and Sharma, Abhishek and Datt, Ram and Chand, Suresh and Asha, S. K.} } @article { ISI:000367840900002, title = {Interfacial tension approach toward drug loading with two-dimensional crosslinked polymer embedded gold: adsorption kinetics evaluation}, journal = {International Journal Of Polymeric Materials And Polymeric Biomaterials}, volume = {65}, number = {4}, year = {2016}, month = {JAN}, pages = {168-175}, publisher = {TAYLOR \& FRANCIS AS}, address = {KARL JOHANS GATE 5, NO-0154 OSLO, NORWAY}, abstract = {

Interfacial tension of drugs with hydrophilic polymer (A) embedded gold resulting into selective drug adsorption, which also affected the drug adsorption kinetics. Two-dimensional crosslinked polymer embedded gold was synthesized for drug loading application in an acidic buffer. Lower interfacial tension of pantoprazole sodium (B) revealed the exponential loading inversely loading was gradual for chloroquine (C) having more interfacial tension with adsorbent. Initial 2 h was the exponential adsorption period for a pantoprazole sodium whereas exponential adsorption begins after 12 h for a chloroquine. Monolayer drug adsorption was obtained because Langmuir adsorption isotherm was obeyed by both drugs. Moreover, pseudo first-and pseudo second-order kinetics was also evaluated which demonstrated that reactive sites of the adsorbent are homogeneous and drug adsorption mechanism is chemisorption and not the physisorption. Thermal analysis was evaluated to confirm the polymer thermostability and glass transition temperature during catalytic applications in thermal reactions.

}, keywords = {Adsorption isotherm, adsorption kinetics, drug loading, drug polarity, Interfacial tension}, issn = {0091-4037}, doi = {10.1080/00914037.2015.1074911}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article { ISI:000371852000031, title = {Interplaying intrinsic and extrinsic proton conductivities in covalent organic frameworks}, journal = {Chemistry of Materials}, volume = {28}, number = {5}, year = {2016}, month = {MAR}, pages = {1489-1494}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A sulfonic-acid-based covalent organic framework (TpPa-SO3H) has been synthesized that exhibits intrinsic proton conductivity under anhydrous conditions. The sulfonic acid groups are aligned on the two-dimensional (2D) layers at periodic intervals and promote the proton hopping inside the hexagonal one-dimensional channel. The intrinsic proton conductivity of TpPa-SO3H was measured as 1.7 X 10(-5) S cm(-1) at 120 degrees C under anhydrous conditions. To enhance the proton conductivity, we have synthesized a hybrid COF TpPa(SO3H-Py) by a ligand-based solid-solution approach that contains sulfonic acid as the acidic site, as well as pyridine as the basic site, in order to immobilize acidic proton carrier molecules. Impregnation of phytic acid molecules inside the framework increases the anhydrous proton conductivity up to 5 x 10(-4) S cm(-1) at 120 degrees C. Such an approach highlights the advantage and first-time use of hybrid COF for interplaying intrinsic to extrinsic proton conductivity.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.5b04947}, author = {Chandra, Suman and Kundu, Tanay and Dey, Kaushik and Addicoat, Matthew A. and Heine, Thomas and Banerjee, Rahul} } @article { ISI:000367940900010, title = {Inverse high internal phase emulsion polymerization (i-HIPE) of GMMA, HEMA and GDMA for the preparation of superporous hydrogels as a tissue engineering scaffold}, journal = {Journal of Materials Chemistry B}, volume = {4}, number = {3}, year = {2016}, month = {NOV}, pages = {450-460}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A series of novel superporous hydrogels for regenerative medicine were prepared by oil-in-water (o/w) or inverse high internal phase emulsion (i-HIPE) copolymerization of glycerol monomethacrylate (GMMA), 2-hydroxy ethyl methacrylate (HEMA) and glycerol dimethacrylate (GDMA) as a cross-linker using a non toxic solvent and a redox initiator system at the physiological temperature (37 degrees C). The monomer GMMA was synthesized from glycidyl methacrylate (GMA) by an alternative facile method using Amberlyst-15. The described i-HIPEs showed a significantly wider stability window. The polyHIPE hydrogels were characterized by FTIR, BET method for surface area, mercury porosimetry, SEM, DSC, TGA, XRD, compressive strain and strain recovery. The swelling ratio of the hydrogels and their degradation in 0.007 M NaOH and lipase B (Candida antarctica) solutions were determined gravimetrically and the rate of degradation was explained in terms of the molecular structure of the hydrogels. The morphological studies showed that the pore diameter varied between 20 and 30 mu m and the pore throats (interconnecting windows) diameter was in the range of 4-8 mu m. The described polyHIPE hydrogels were found to have an open cell morphology and interconnected pore architecture, which are important characteristics for scaffold applications. The initial cytotoxicity study performed according to ISO-10993-5 indicated cytocompatibility (97\% cell viability) and the subsequent cell seeding and proliferation study exhibited 55-88\% cell viability (increased monotonously from GHG-1 to GHG-5), which could be attributed to modulation of the physical and chemical properties of the hydrogels. The described super porous hydrogels are considered as potential candidates for scaffold materials in tissue engineering applications.

}, issn = {2050-750X}, doi = {10.1039/c5tb01873k}, author = {Nalawade, Archana C. and Ghorpade, Ravindra V. and Shadbar, Sadiqua and Qureshi, Mohammed Shadbar and Chavan, Nayaku and Khan, Ayesha A. and Ponrathnam, S.} } @article {45864, title = {Isolation and virtual screening of antimicrobial prodigiosin pigment from oxalotrophic Serratia marcescens OX_R strain}, journal = {Journal of Applied Pharmaceutical Science}, volume = {6}, year = {2016}, month = {NOV}, pages = {052-058}, type = {Article}, abstract = {Prodigiosin a multifaceted secondary metabolite produced by Serratia spp. having great potential as a pharmaceutical. In the present study we demonstrate that oxalate supplementation in peptone glycerol production media increased organoleptic characters and yield of prodigiosin pigment extracted from oxalotrophic Serratia marcescens OX_R isolated from Indian bat guano sample. The pigment was demonstrated in-vitro as an antibacterial agent against common opportunistic skin surface pathogen Staphylococcus aureus NCIM 5021 strain as killing activity by agar well diffusion method. The docking analysis and pharmacophore modelling indicated that the probable mechanism of action of the prodigiosin was against Staphylococcus aureus DNA gyrase protein. The pigment was also found to efficiently dye both cotton and latex polymer. In summary, we describe here an oxalotrophic Serratia marcescens which may serve as a potent and economical resource of prodigiosin which owing to its dyeing and anti-bacterial activities finds future avenues to be developed as dressing material for nosocomial subjects or burn victim patients.}, doi = {10.7324/JAPS.2016.601108}, author = {Suryavanshi, M. V. and Waghmode, S. R. and Bharti, N. and Choudhari, P. B. and Hingamire, T. B. and Shouche, Y. S.} } @article { ISI:000369603400025, title = {Low frequency noise and photo-enhanced field emission from ultrathin PbBi2Se4 nanosheets}, journal = {Journal of Materials Chemistry C}, volume = {4}, number = {5}, year = {2016}, month = {DEC}, pages = {1096-1103}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Atomically thin two-dimensional layered materials have gained wide interest owing to their novel properties and potential for applications in nanoelectronic and optoelectronic devices. Here, we present the spectral analysis and photo-enhanced field emission studies of a layered intergrowth PbBi2Se4 nanosheet emitter, performed at the base pressure of similar to 1 x 10(-8) mbar. The emitter shows a turn-on field value of similar to 4.80 V mu m(-1), corresponding to an emission current density of similar to 1 mu A cm(-2). Interestingly, when the cathode was illuminated with visible light, it exhibited a lower turn-on field of B3.90 V mm(-1), and a maximum emission current density of similar to 893 mu A cm(-2) has been drawn at an applied electric field of similar to 8.40 V mu m(-1). Furthermore, the photo-enhanced emission current showed reproducible, step-like switching behavior in synchronous with ON-OFF switching of the illumination source. The emission current-time plots reveal excellent stability over a duration of similar to 6 h. Low-frequency noise is a significant limitation for the performance of nanoscale electronic devices. The spectral analysis performed on a Fast Fourier Transform (FFT) analyzer revealed that the observed noise is of 1/f(alpha) type, with the value of alpha similar to 0.99. The low frequency noise, photo-enhanced field emission, and reproducible switching behavior characterized with very fast rise and fall times propose the layered PbBi2Se4 nanosheet emitter as a new promising candidate for novel vacuum nano-optoelectronic devices.

}, issn = {2050-7526}, doi = {10.1039/c5tc02993g}, author = {Suryawanshi, Sachin R. and Guin, Satya N. and Chatterjee, Arindom and Kashid, Vikas and More, Mahendra A. and Late, Dattatray J. and Biswas, Kanishka} } @article {42913, title = {Low turn-on field and high field emission current density from Ag/TiO 2 nanocomposite}, journal = {Chemical Physics Letters}, volume = {657}, year = {2016}, month = {JUL}, pages = {167{\textendash}171}, abstract = {

High current density of 1.24 mA/cm2 was drawn at an applied field of 4.4 V/μm from Ag/TiO2 nanocomposite. Also the turn-on field has been reduced from 3.9 V/μm to 2.7 V/μm for the emission current density of 10 μA/cm2. Ag/TiO2 nanocomposite was synthesized by using UV-switchable reducing agent. TiO2 nanotube wall was decorated by Ag nanoparticles with average diameter of 17 nm. To the best of our knowledge this is the first report on the field emission studies of Ag/TiO2 nanocomposite. Simple synthesis route coupled with superior field emission properties indicate the possible use of Ag/TiO2 nanocomposite for micro/nanoelectronic devices.

}, doi = {10.1016/j.cplett.2016.06.003}, author = {Patil, Girish P. and Deore, Amol B. and Bagal, Vivekanand S. and Late, Dattatray J. and More, Mahendra A. and Chavan, Padmakar G.} } @article { ISI:000379314700006, title = {Low-overpotential electrocatalytic water splitting with noble-metal-free nanoparticles supported in a sp(3) n-rich flexible COF}, journal = {Advanced Energy Materials}, volume = {6}, number = {13}, year = {2016}, month = {JUL}, pages = {Article No. 1600110}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp(3) nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (\<2 nm sized) non-noble-metal-based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen-evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm(-2). The overpotential observed in the COF-nanoparticle system is the best in class, and is close to the current record of approximate to 200 mV for any noble-metalfree electrocatalytic water splitting system-the Fe-Co-Ni metal-oxide-film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec(-1)) for the reaction. The COF is able to stabilize such small-sized NP in the absence of any capping agent because of the COF-Ni(OH)(2) interactions arising from the N-rich backbone of the COF. Density-functional-theory modeling of the interaction between the hexagonal Ni(OH)(2) nanosheets and the COF shows that in the most favorable configuration the Ni(OH)(2) nanosheets are sandwiched between the sp(3) nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.

}, issn = {1614-6832}, doi = {10.1002/aenm.201600110}, author = {Mullangi, Dinesh and Dhavale, Vishal M. and Shalini, Sorout and Nandi, Shyamapada and Collins, Sean and Woo, Tom and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article {43053, title = {Metal phosphine-sulfonate acetonitrile complex for insertion copolymerization of functional olefins}, number = {PCT/IN2015/050107}, year = {2016}, month = {MAR}, type = {Application}, edition = {C07F9/50, C07F15/00}, chapter = {WO2016038631 A1}, address = {India}, issn = {WO2016038631 A1}, author = {Chikkali, Samir H. and Gaikwad, Shahaji R.} } @article {43420, title = {Modified photo-electrochemical and photo-voltaic properties of solvothermally crystallised TiO2 nanotube arrays}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {27}, year = {2016}, month = {DEC}, pages = {12427-12437}, abstract = {TiO2 nanotube arrays formed by electrochemical anodization of Ti metal foil are crystallized through a solvothermal technique at 200 A degrees C (as compared to conventional annealing at 550 A degrees C), which results in anatase phase with granular morphology. The photo-current measurements reveal a higher current-density under the visible light for solvothermally crystallized samples. The photo-current behavior has been analysed and correlated with defect state characterization using X-ray photo-electron spectroscopy, Photo-luminescence, Electron paramagnetic resonance and Mott-Schottky measurements. These studies indicate an oxygen vacancy related defect state at 1.14 eV below the conduction band. Also, the density of defect states in solvothermally crystallised samples is an order of magnite, the photo-voltaic properties are studied through dye-sensitised solar cells. I-Vude higher than that in conventionally annealed samples. Furthermor characteristics of DSSC fabricated with solvothermally crystallised samples show comparable efficiency but higher dye-adsorption with respect to the conventionally annealed samples. Such a comparable efficiency at a lower thermal budget leads to reduced {\textquoteright}energy pay-back time{\textquoteright} in solar cells fabricated with solvothermally crystallised TiO2 nanotube arrays. Finally, we demonstrate a proof-of-concept design of flexible solar cell based on TiO2 nanotubes grown on Kapton substrate and crystallised through the solvothermal technique.}, doi = {10.1007/s10854-016-5248-0}, author = {Banki, Manmadha Rao and Tathavadekar, Mukta and Chunchu, Venkatrao and Roy, Somnath C.} } @article { ISI:000382079800019, title = {Modulation of charge carrier mobility by side-chain engineering of bi(thienylenevinylene)thiophene containing PPE-PPVs}, journal = {RSC Advances}, volume = {6}, number = {57}, year = {2016}, month = {MAY}, pages = {51642-51648}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Four 2-dimensional conjugated poly(p-phenylene-ethynylene)-alt-poly(p-phenylene-vinylene) polymers containing a lateral bi(thienylenevinylene)thiophene unit (BTE-PVs) were synthesised and characterised. The investigated polymers share the same conjugated structure, but differ in the anchoring positions of solubilising linear octyloxy/branched 2-ethylhexyloxy side-chains. UV-vis spectra of the polymers in dilute chloroform solutions and as thin films were studied. X-Ray diffraction patterns as well as the bulk charge transport of polymer films cast from chlorobenzene solutions were also investigated. A dramatic effect of the solubilising side-chains on the charge carrier mobility of BTE-PV films was observed, with bulk hole mobility values ranging between 1.3 x 10(-5) cm(2) V-1 s(-1) and 2.2 x 10(-2) cm(2) V-1 s(-1), which is not ascribable to evident structural variations of the polymer films. It is shown that the combination of linear octyloxy and branched 2-ethylhexyloxy side-chains is favorable for the charge transport properties of BTE-PVs, compared to the incorporation of only linear or only branched side-chains.

}, issn = {2046-2069}, doi = {10.1039/c6ra00858e}, author = {Jadhav, Rupali R. and Camaioni, Nadia and Oppelt, Kerstin and Tinti, Francesca and Gazzano, Massimo and Fattori, Valeria and Wadgaonkar, Prakash P. and Rathgeber, Silke and Hoppe, Harald and Egbe, Daniel A. M.} } @article { ISI:000374286500004, title = {Molecular cloning and characterization of O-methyltransferase from mango fruit (mangifera indica cv. alphonso)}, journal = {Molecular Biotechnology}, volume = {58}, number = {5}, year = {2016}, month = {MAY}, pages = {340-350}, publisher = {HUMANA PRESS INC}, address = {999 RIVERVIEW DRIVE SUITE 208, TOTOWA, NJ 07512 USA}, abstract = {

Flavour of ripe Alphonso mango is invariably dominated by the de novo appearance of lactones and furanones during ripening. Of these, furanones comprising furaneol (4-hydroxy-2,5-dimethyl-3(2H)-furanone) and mesifuran (2,5-dimethyl-4-methoxy-3(2H)-furanone) are of particular importance due to their sweet, fruity caramel-like flavour characters and low odour detection thresholds. We isolated a 1056 bp complete open reading frame of a cDNA encoding S-adenosyl-l-methionine-dependent O-methyltransferase from Alphonso mango. The recombinantly expressed enzyme, MiOMTS showed substrate specificity towards furaneol and protocatechuic aldehyde synthesizing mesifuran and vanillin, respectively, in an in vitro assay reaction. A semi-quantitative PCR analysis showed fruit-specific expression of MiOMTS transcripts. Quantitative real-time PCR displayed ripening-related expression pattern of MiOMTS in both pulp and skin of Alphonso mango. Also, early and significantly enhanced accumulation of its transcripts was detected in pulp and skin of ethylene-treated fruits. Ripening-related and fruit-specific expression profile of MiOMTS and substrate specificity towards furaneol is a suggestive of its involvement in the synthesis of mesifuran in Alphonso mango. Moreover, a significant trigger in the expression of MiOMTS transcripts in ethylene-treated fruits point towards the transcriptional regulation of mesifuran biosynthesis by ethylene.

}, keywords = {Ethylene, expression, Flavour, Mango, Mesifuran, Ripening}, issn = {1073-6085}, doi = {10.1007/s12033-016-9933-2}, author = {Chidley, Hemangi G. and Oak, Pranjali S. and Deshpande, Ashish B. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article { ISI:000379577800033, title = {Molecules with O-acetyl group protect protein glycation by acetylating lysine residues}, journal = {RSC Advances}, volume = {6}, number = {70}, year = {2016}, month = {JUL}, pages = {65572-65578}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Pharmaceutical intervention for reduction of advanced glycation end products (AGEs) is considered as a therapeutic strategy to attenuate the pathogenesis of diabetes. Many molecules have been reported to possess antiglycation activity, one such example is acetylsalicylic acid (aspirin). It protects proteins from glycation by acetylating the lysine residues. Therefore, in this study we have synthesized and screened molecules containing free N-acetyl, O-acetyl and acetophenone groups. All the selected molecules in this study showed glycation inhibition but interestingly, only molecules with O-acetyl but not N-acetyl and acetophenone groups were capable of acetylating lysine residue. Furthermore, we have demonstrated that pre-acetylation or aspirin treatment prior to the induction of diabetes helps in reducing HbA1c and AGE formation in the streptozotocin induced diabetic mice. Hence pre-acetylation may have an additional therapeutic efficacy of reducing AGE levels in vivo. Incorporation of O-acetyl group into anti-diabetic molecules could be a useful strategy, as it may have an additive effect in reducing AGEs. Identification of such novel acetylating agents represents a new area in the drug discovery process.

}, issn = {2046-2069}, doi = {10.1039/c6ra11313c}, author = {Vannuruswamy, Garikapati and Jagadeeshaprasad, Mashanipalya G. and Kashinath, K. and Kesavan, Suresh K. and Bhat, Shweta and Korwar, Arvind M. and Chougale, Ashok D. and Boppana, Ramanamurthy and Reddy, D. Srinivasa and Kulkarni, Mahesh J.} } @article { ISI:000374073800014, title = {Naphthoquinone based chemosensor 2-(2 {\textquoteleft}-aminoethylpyridine)-3-chloro-1,4-naphthoquinone: detection of metal ions, X-ray -crystal structures and DFT studies}, journal = {Journal of Molecular Structure}, volume = {1114}, year = {2016}, month = {JUN}, pages = {132-143}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Naphthoquinone based Chemosensor 2; 2-(2{\textquoteright}-aminoethylpyridine)-3-chloro-1,4-napthoquinone have been synthesized and characterized. Chemosensor 2 crystallizes in the orthorhombic space group Pbcn and shows extensive intramolecular as well as intermolecular hydrogen bonding interactions. Each molecule of Chemosensor 2 showed interaction with five neighboring molecules via C-H center dot center dot center dot N, N-H center dot center dot center dot N, C-H center dot center dot center dot Cl and C-H center dot center dot center dot O interactions. Slipped pi-pi stacking interaction was observed in adjacent quinonoid and benzenoid rings. Chemosensor abilities of Chemosensor 2 ligand have been evaluated with metal ions viz. Cu2+, Ni2+, Zn2+, Co2+, Fe3+, Mn2+, Cr3+, Hg2+, La3+ and Cd2+ in methanol, methanol-water mixture and in presence of mild base triethylamine. Stoichiometry of Chemosensor 2 with metal ions such as Cu2+, Ni2+, Zn2+ and Co2+ ions was determined by Jobs method in methanol and were found as 1:1 for Cu2+ and 2:1 for Ni2+, Zn2+ Co2+. The variation in the metal ligand ratio is observed in aqueous media for Cu2+. Chemosensor 2 can be used selectively for naked eye detection of Cu2+ ions. The association constant obtained in methanol shows the trend Cu2+\>Ni2+\>Co2+. Cu2+ and two (Ni-1 and Ni-2) Ni2+ complexes were synthesized. Ni-2 complex showed coordination of Chemosensor 2 ligands was through pyridine nitrogen{\textquoteright}s only. The Chemosensor 2 and its deprotonated forms in methanol, water and triethylamine were also studied by TD-DFT studies. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Aminonaphthoquinone, Chemosensor, hydrogen bonding, Naphthoquinone, pi-pi stacking, TD-DFT}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2016.02.065}, author = {Patil, Amit and Ware, Anuja P. and Bhand, Sujit and Chakravarty, Debamitra K. and Gonnade, Rajesh G. and Pingale, Subhash S. and Salunke-Gawali, Sunita} } @article {42949, title = {New dinor-cis-labdane diterpene and flavonoids with antimycobacterium activity from colebrookea oppositifolia}, journal = {Planta Medica Letters}, volume = {3}, year = {2016}, month = {MAR}, pages = {e20-e24}, abstract = {

The new 14,15-dinor-cis-labdane diterpene, named (+)-14,15-dinor-9α-hydroxy-cis-labd-11(E)-en-13-one (1), was isolated from the acetone extract of the aerial parts of Colebrookea oppositifolia, along with the known compounds alnustin (2), mosloflavone (3), flindulatin (4), 5,6,7-trimethoxy baicalein (5), tanetin (6), scutellarein 4'-methyl ether (7), apigenin (8), caffeic acid (9), anisofolin A (10), apigetrin (11), and forsythoside A (12). Structures of the new and known compounds were established by detailed analysis of 1D and 2D nuclear magnetic resonance studies. The isolated compounds 1{\textendash}12 were evaluated for their antimycobacterium activity against Mycobacterium tuberculosis H37Ra and Mycobacterium bovis in both dormant and active phases. Compounds 1, 7, and 8 exhibited inhibitory activity against M. tuberculosis with IC50 values in the range of 8.1{\textendash}55.0 {\textmu}M (MIC 14.4{\textendash}119.7 {\textmu}M) in the active phase and 7.4{\textendash}43.5 {\textmu}M (MIC 11.5{\textendash}123.3 {\textmu}M) in the dormant phase. Similarly 1, 7, and 8 exhibited inhibitory activity against M. bovis with IC50 values in the range of 4.1{\textendash}98.5 {\textmu}M (MIC 13.7{\textendash}161.0 {\textmu}M) in the active phase and 4.1{\textendash}111.1 {\textmu}M (MIC 13.0{\textendash}166.4 {\textmu}M) in the dormant phase.

}, doi = {10.1055/s-0042-102200}, author = {Chinchansure, Ashish A. and Arkile, Manisha A. and Shinde, Dinesh R. and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000372856300024, title = {New understanding on regulating the crystallization and morphology of the beta-polymorph of isotactic polypropylene based on carboxylate-alumoxane nucleating agents}, journal = {Macromolecules}, volume = {49}, number = {6}, year = {2016}, month = {MAR}, pages = {2197-2205}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Carboxylate alumoxane derived from p-n-alkylbenzoic acids, where n-alkyl group changes from 2 to 8 carbon atoms, exhibits dual nucleating ability and nucleates isotactic polypropylene (iPP) into predominantly in the beta-phase under specific conditions. The selectivity of the beta-phase nucleation depends on the concentration of the nucleating agent, end melting temperature and cooling rate. The beta-phase obtained from p-n-alkylbenzoate-alumoxanes is compared with the beta-phase obtained from calcium pimelate (CaP), an efficient beta-phase selective, nucleating agent, using the results from DSC, WAXS, and SAXS analysis. The lamellar morphology of iPP nucleated with different nucleating agents crystallized at different crystallization temperatures (T-C) under controlled nonisothermal conditions are evaluated using SAXS analysis. The long period increases with increasing crystallization temperature and the long period of the beta-phase is always larger than that of the alpha-phase for a given crystallization temperature. Furthermore, the variation of long period with crystallization temperature clearly brings out two crystallization temperature ranges; the low temperature range and the high temperature range. However, the beta-phase shows a lower changeover temperature compared to that of the alpha-phase. The one-dimensional correlation analysis of the beta-phase shows that the thickness of the crystal lamellae (lc) increases with T-C and exhibits the low and high crystallization temperature ranges, while the thickness, of the amorphous layer (la) more or less remains constant. In-situ high temperature WAXS studies capture the beta-phase to the a-phase transition and the transformed material con-elates well with the lamellar thickness of the beta-phase. The morphological difference between the alpha- and the beta-phases are discussed and attributed to the differences in the impact properties and the melting temperature. This study clearly demonstrates that the lamellar morphology mainly depends on the T-C and not on the nature of the nucleating agents.

}, issn = {0024-9297}, doi = {10.1021/acs.macromol.5b02466}, author = {Mani, Mohan Raj and Chellaswamy, Ramesh and Marathe, Yogesh N. and Pillai, Vijayamohanan K.} } @article { ISI:000374351200005, title = {Next-generation ammonia pretreatment enhances cellulosic biofuel production}, journal = {Energy \& Environmental Science}, volume = {9}, number = {4}, year = {2016}, month = {FEB}, pages = {1215-1223}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new liquid ammonia pretreatment methodology called Extractive Ammonia (EA) was developed to simultaneously convert native crystalline cellulose I-beta (CI) to a highly digestible cellulose IIII (CIII) allomorph and selectively extract up to B45\% of the lignin from lignocellulosic biomass with near-quantitative retention of all polysaccharides. EA pretreated corn stover yielded a higher fermentable sugar yield compared to the older Ammonia Fiber Expansion (AFEX) process while using 60\% lower enzyme loading. The EA process preserves extracted lignin functionalities, offering the potential to co-produce lignin-derived fuels and chemicals in the biorefinery. The single-stage EA fractionation process achieves high biofuel yields (18.2 kg ethanol per 100 kg untreated corn stover, dry weight basis), comparable to those achieved using ionic liquid pretreatments. The EA process achieves these ethanol yields at industrially-relevant conditions using low enzyme loading (7.5 mg protein per g glucan) and high solids loading (8\% glucan, w/v).

}, issn = {1754-5692}, doi = {10.1039/c5ee03051j}, author = {Sousa, Leonardo da Costa and Jin, Mingjie and Chundawat, Shishir P. S. and Bokade, Vijay V. and Tang, Xiaoyu and Azarpira, Ali and Lu, Fachuang and Avci, Utku and Humpula, James and Uppugundla, Nirmal and Gunawan, Christa and Pattathil, Sivakumar and Cheh, Albert M. and Kothari, Ninad and Kumar, Rajeev and Ralph, John and Hahn, Michael G. and Wyman, Charles E. and Singh, Seema and Simmons, Blake A. and Dale, Bruce E. and Balan, Venkatesh} } @article {43020, title = {Nitrogen doping in oxygen-deficient Ca2Fe2O5: a strategy for efficient oxygen reduction oxide catalysts}, journal = {ACS Applied Materials and Interfaces}, volume = {8}, year = {2016}, month = {NOV}, pages = {34387{\textendash}34395}, doi = {10.1021/acsami.6b11718}, author = {Jijil, Chamundi P. and Lokanathan, Moorthi and Chithiravel, Sundaresan and Nayak, Chandrani and Bhattacharyya, Dibyendu and Jha, Shambhu Nath and Babu, P. D. and Kakade, Bhalchandra A. and Devi, R. Nandini} } @article { ISI:000375445700073, title = {Observation of enhanced field emission properties of Au/TiO2 nanocomposite}, journal = {Applied Physics A-Materials Science \& Processing}, volume = {122}, number = {5}, year = {2016}, month = {MAY}, pages = {560}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Simple and low-cost method of thermal annealing was used to decorate Gold (Au) nanoparticles on aligned TiO2 nanotubes. The aligned TiO2 nanotubes were decorated by Au nanoparticles with an average diameter of 9, 18 and 28 nm (aligned TiO2 nanotubes referred as specimen A and TiO2 nanotubes decorated by Au nanoparticles with average diameter of 9, 18 and 28 nm are referred as specimen B, C and D, respectively). The detailed characterization such as structural, morphological and elemental analysis of TiO2 and Au/TiO2 nanocomposite have been carried out using X-ray diffraction, field emission scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscopy and Raman spectroscopy. Furthermore, the meticulous comparative field emission characteristics of the aligned TiO2 nanotubes and Au/TiO2 nanocomposite have been performed. The turn-on field defined for the current density of 10 mu A/cm(2) has been found to be 3.9, 2.8, 3.2 and 3.7 V/mu m for specimen A, B, C and D, respectively. The observed low turn-on field of specimen B has been found to be superior than the other semiconducting nanocomposites reported in the literature. The emission current stability over a period of 3 h is found to be better for all the specimens. To the best of our knowledge, a systematic field emission study of Au/TiO2 nanocomposite has not been explored. The observed superior field emission study of Au/TiO2 nanocomposite indicates their possible use in micro/nanoelectronic devices.

}, issn = {0947-8396}, doi = {10.1007/s00339-016-0090-z}, author = {Patil, Girish P. and Bagal, Vivekanand S. and Suryawanshi, Sachin R. and Late, Dattatray J. and More, Mahendra A. and Chavan, Padmakar G.} } @article { ISI:000372856600027, title = {Omniphilic polymeric sponges by ice templating}, journal = {Chemistry of Materials}, volume = {28}, number = {6}, year = {2016}, month = {MAR}, pages = {1823-1831}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Sponges that absorb a large quantity of solvent relative to their weight, independent of the solvent polarity, represent useful universal absorbents for laboratory and industrial spills. We report the preparation of macroporous polymer sponges by ice templating of polyethylenimine aqueous solutions and their cross-linking in the frozen state. The as-prepared monolith is hydrophilic and absorbs over 30 fold its weight in water. Modification of this sponge using valeroyl chloride renders it omniphilic; viz., a modified sponge absorbs over 10-fold its dry weight of either water or hexane. Modification using palmitoyl chloride that has a longer chain length results in the preparation of a hydrophobic sponge with a water contact angle around 130, which retains its oleophilicity underwater. The solvent absorbed in these sponges can be simply squeezed out, and the sponges are stable to several hundred cycles of compression. The large pore sizes of these sponges allow rapid absorption of even high viscosity solvents such as pump oil. Finally, we demonstrate that these sponges are also able to separate apolar oils that are emulsified in water using surfactants. These high porosity sponges with controllable solvophilicity represent inexpensive, high performance universal absorbents for general solvent spills.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.5b04988}, author = {Chatterjee, Soumyajyoti and Sen Gupta, Sayam and Kumaraswamy, Guruswamy} } @article { ISI:000381302400017, title = {P4VP and oligo(phenylenevinylene)-perylenebisimide mixed donor-acceptor supramolecular comb polymer complexes with improved charge carrier mobility}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {54}, number = {15}, year = {2016}, month = {AUG}, pages = {2403-2412}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Random donor-acceptor (D-A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN-OH) and Perylenebisimide (named UPBI-PDP), respectively, were complexed with Poly(4-vinyl pyridine) (P4VP). A series of random D-A supramolecular comb polymers were formed by varying the ratios of UPBI-PDP and OPVCN-OH with P4VP. A 100\% P4VP-donor polymer complex [P4VP(OPV1.00)] and a 100\% P4VP-acceptor polymer complex [P4VP(UPBI1.00)] were also synthesized and characterized. Complex formation was confirmed by FT-IR and H-1 NMR spectroscopy. Solid state structural studies carried out using small angle X-ray scattering and wide angle X-ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the \<10 nm scale for the P4VP(OPV1.00), P4VP(UPBI1.00), and mixed P4VP (D-A) complexes. The effect of the nanoscopic D-A self-assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D-A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV0.25+UPBI0.75) exhibited an average hole mobility in the order of 10(-2) cm(2) V-1 s(-1) and electron mobility 10(-5) cm(2) V-1 s(-1). (C) 2016 Wiley Periodicals, Inc.

}, keywords = {donor-acceptor, oligo(phenylenevinylene), P4VP, Perylenebisimide, Self-assembly, structure-property relations, supramolecular comb polymer, supramolecular structures}, issn = {0887-624X}, doi = {10.1002/pola.28115}, author = {Saibal, B. and Chithiravel, Sundaresan and Asha, S. K.} } @article { ISI:000370900600019, title = {Photoluminescent tetrahedral d(10)-metal Schiff base complexes exhibiting highly ordered mesomorphism}, journal = {Polyhedron}, volume = {105}, year = {2016}, month = {FEB}, pages = {150-158}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A series of four-coordinate d(10)-metal complexes of the type [ML2] {M = Zn, Cd, Hg; L = 4-nitro-2-((octadecylimino)methyl)phenol}, incorporating a new N-alkylated bidentate [N,O]-donor salicylaldimine Schiff base ligand, has been synthesized and characterized by elemental analyses, FT-IR, UV-Vis, H-1 NMR and FAB-mass spectroscopies. The ligand is non-mesomorphic and devoid of any photoluminescence. The zinc(II) and cadmium(II) complexes displayed highly ordered mesophases reminiscent of soft crystals. The phases have been characterized by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies. The complex of mercury(II) decomposed prior to melting. An orthogonal symmetry with a {\textquoteleft}herringbone{\textquoteright} array for the zinc complex and a primitive triclinic symmetry (p(1)) for the cadmium complex, respectively, has been proposed. The complexes exhibited fluorescence at room temperature, both in the solution and in the solid state, with emission maxima in the blue region. Density functional theory (DFT) calculations carried out using the GAUSSIAN 09 program at the B3LYP level revealed a distorted tetrahedral geometry around the metal center in all the complexes. Natural bond orbital (NBO) analysis suggested appreciable charge transfer from the ligand to the metal center in the complexes. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Density functional theory, Luminescence, Mesophase, Schiff base, X-ray diffraction}, issn = {0277-5387}, doi = {10.1016/j.poly.2015.11.053}, author = {Chakraborty, Sutapa and Purkayastha, Debraj Dhar and Das, Gobinda and Bhattacharjee, Chira R. and Mondal, Paritosh and Prasad, S. Krishna and Rao, D. S. Shankar} } @article { ISI:000375559600001, title = {Phytogenic silver, gold, and bimetallic nanoparticles as novel antitubercular agents}, journal = {International Journal of Nanomedicine}, volume = {11}, year = {2016}, month = {MAY}, pages = {1889{\textemdash}1897}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Purpose: Multi- and extensively drug-resistant tuberculosis (TB) is a global threat to human health. It requires immediate action to seek new antitubercular compounds and devise alternate strategies. Nanomaterials, in the present scenario, have opened new avenues in medicine, diagnosis, and therapeutics. In view of this, the current study aims to determine the efficacy of phytogenic metal nanoparticles to inhibit mycobacteria. Methods: Silver (AgNPs), gold (AuNPs), and gold-silver bimetallic (Au-AgNPs) nanoparticles synthesized from medicinal plants, such as Barleria prionitis, Plumbago zeylanica, and Syzygium cumini, were tested against Mycobacterium tuberculosis and M. bovis BCG. In vitro and ex vivo macrophage infection model assays were designed to determine minimum inhibitory concentration (MIC) and half maximal inhibitory concentration of nanoparticles. Microscopic analyses were carried out to demonstrate intracellular uptake of nanoparticles in macrophages. Besides this, biocompatibility, specificity, and selectivity of nanoparticles were also established with respect to human cell lines. Results: Au-AgNPs exhibited highest antitubercular activity, with MIC of \<2.56 mu g/mL, followed by AgNPs. AuNPs did not show such activity at concentrations of up to 100 mu g/mL. In vitro and ex vivo macrophage infection model assays revealed the inhibition of both active and dormant stage mycobacteria on exposure to Au-AgNPs. These nanoparticles were capable of entering macrophage cells and exhibited up to 45\% cytotoxicity at 30 mu g/mL (ten times MIC concentration) after 48 hours. Among these, Au-AgNPs synthesized from S. cumini were found to be more specific toward mycobacteria, with their selectivity index in the range of 94-108. Conclusion: This is the first study to report the antimycobacterial activity of AuNPs, AgNPs, and Au-AgNPs synthesized from medicinal plants. Among these, Au-AgNPs from S. cumini showed profound efficiency, specificity, and selectivity to kill mycobacteria. These should be investigated further to develop novel TB nanoantibiotics.

}, keywords = {Antimycobacterial agent, Cytotoxicity, drug resistance, Mycobacteria, Nanoparticles, tuberculosis}, issn = {1178-2013}, doi = {10.2147/IJN.S102488}, author = {Singh, Richa and Nawale, Laxman and Arkile, Manisha A. and Wadhwani, Sweety and Shedbalkar, Utkarsha and Chopade, Snehal and Sarkar, Dhiman and Chopade, Balu Ananda} } @article {43413, title = {Preparation and characterization of microcapsules containing industrially important reactive water-soluble polyamine}, journal = {Colloid and Polymer Science}, volume = {294}, year = {2016}, month = {DEC}, pages = {2039-2050}, abstract = {Polyurea microcapsules containing water-soluble reactive polyamine, namely, polyaziridine (A33), were prepared by interfacial polymerization technique in non-aqueous medium, wherein (i) A33 was encapsulated for the first time as a neat amine without forming its salt or adduct and (ii) microcapsules formed were without any deleterious effect on A33. A systematic study was conducted by preparing microcapsules with different polyurea wall architectures. Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (H-1 NMR) spectroscopic analysis of extracted A33 from microcapsules do not show any structural changes during microencapsulation. A titration method was developed to analyze the amount of encapsulated A33 quantitatively. Polyurea microcapsules obtained from reaction of ethylene diamine (E) and isophorone diisocyanate (I) monomers have shown better properties such as encapsulation efficiency and extent of agglomeration. Significant reduction in the size was observed when microcapsules of EI wall material were prepared by homogenizing the initial emulsion of A33 in paraffin oil. The process described in this paper for the preparation of microcapsules is cost-effective and industrially viable, which can find applications in agrochemicals, coatings, self-healing composites, etc.}, doi = {10.1007/s00396-016-3966-8}, author = {Shukla, Parshuram G. and Jagtap, Siddheshwar B. and Biradar, Satish C. and Charpe, Vaibhav P. and Jadhav, Arun S.} } @article { ISI:000371428800003, title = {Probing the ATP-induced conformational flexibility of the PcrA helicase protein using molecular dynamics simulation}, journal = {Journal of Molecular Modeling}, volume = {22}, number = {3}, year = {2016}, month = {MAR}, pages = {54}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Helicases are enzymes that unwind double-stranded DNA (dsDNA) into its single-stranded components. It is important to understand the binding and unbinding of ATP from the active sites of helicases, as this knowledge can be used to elucidate the functionality of helicases during the unwinding of dsDNA. In this work, we investigated the unbinding of ATP and its effect on the active-site residues of the helicase PcrA using molecular dynamic simulations. To mimic the unbinding process of ATP from the active site of the helicase, we simulated the application of an external force that pulls ATP from the active site and computed the free-energy change during this process. We estimated an energy cost of similar to 85 kJ/mol for the transformation of the helicase from the ATP-bound state (1QHH) to the ATP-free state (1PJR). Unbinding led to conformational changes in the residues of the protein at the active site. Some of the residues at the ATP-binding site were significantly reoriented when the ATP was pulled. We observed a clear competition between reorientation of the residues and energy stabilization by hydrogen bonds between the ATP and active-site residues. We also checked the flexibility of the PcrA protein using a principal component analysis of domain motion. We found that the ATP-free state of the helicase is more flexible than the ATP-bound state.

}, keywords = {ATP, DNA helicase, PcrA, Residue reorientation, Translocation, Umbrella sampling, Unwinding}, issn = {1610-2940}, doi = {10.1007/s00894-016-2922-3}, author = {Mhashal, Anil R. and Choudhury, Chandan Kumar and Roy, Sudip} } @article { ISI:000377425900059, title = {Problem solving and environmentally benign approach toward diversity oriented synthesis of novel 2-amino-3-phenyl (or Alkyl) sulfonyl-4H-chromenes at ambient temperature}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {4}, number = {6}, year = {2016}, month = {JUN}, pages = {3450-3464}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A problem solving, environmentally benign, and diversity oriented protocol has been described for multi component synthesis of medicinally privileged 2-amino-3-phenyl (or methyl) sulfonyl-4H-chromenes by one-pot, three component condensation among aldehydes, phenyl (or methyl) sulphonyl acetonitrile, and alpha-naphthol, 3-dimethylamino phenol, 4-hydroxy-N-methyl-quinoline-2-one as well as 4-hydroxycarbazole, using diethylamine as an efficient organo catalyst. The catalyst employed is commercially available, inexpensive, and nontoxic. Ambient reaction conditions, very high yields, wide scope, and avoidance of conventional isolation as well as chromatographic purification have improved the practical utility of this protocol manifold.

}, keywords = {2-Amino-3-methylsulfonyl-4H-chromenes, 2-Amino-3-phenylsulfonyl-4H-chromenes, diethylamine, green chemistry, Multicomponent synthesis, organocatalyst}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.6b00484}, author = {Pandit, Kapil S. and Kupwade, Ravindra V. and Chavan, Pramod V. and Desai, Uday V. and Wadgaonkar, Prakash P. and Kodam, Kisan M.} } @article { ISI:000369508800059, title = {Promotional effect of Fe on the performance of supported Cu catalyst for ambient pressure hydrogenation of furfural}, journal = {RSC Advances}, volume = {6}, number = {5}, year = {2016}, month = {DEC}, pages = {3888-3898}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A noble-metal free FeCu based bimetallic catalyst system prepared by facile co-impregnation method was found to be highly admirable for vapour phase selective hydrogenation of furfural to furfuryl alcohol at ambient pressure. Monometallic Cu/gamma-Al2O3, Fe/gamma-Al2O3 and bimetallic FeCu/gamma-Al2O3 catalysts with different Fe loadings were prepared. Structural and morphological features of the catalysts were thoroughly investigated by several physico-chemical characterization techniques. The influence of various reaction parameters, such as Fe loading, reaction temperature and flow of reactants was examined with respect to furfural conversion and furfuryl alcohol yield. The results clearly showed that an optimum amount of Fe is necessary to enhance the catalytic activity of monometallic Cu/gamma-Al2O3 for the selective hydrogenation of furfural. The catalyst FC-10 with 10 wt\% Fe exhibited excellent activity which led to high furfural conversion (\>93\%) and furfuryl alcohol selectivity (\>98\%) under mild reaction conditions. The higher activity of bimetallic FeCu/gamma-Al2O3 compared to monometallic Cu/gamma-Al2O3 is ascribed to the formation of FeCu bimetallic particles and the existence of oxygen vacancies in the Fe oxide system. The superior activity after Fe loading on the Cu-based catalyst was attributed to the synergy between Cu and Fe. A plausible mechanism is proposed to explain the promoting effect of Fe, which involves synergism between Fe sites with strong oxophilic nature and Cu sites with a high ability for hydrogen activation. Based on the activity results, prolonged catalytic activity and spent catalyst analysis, the developed FeCu/gamma-Al2O3 catalyst is inexpensive, eco-benign and robust, which makes it a promising candidate for the efficient conversion of biomass-derived substrates to fine chemicals and drop-in biofuels.

}, issn = {2046-2069}, doi = {10.1039/c5ra24742j}, author = {Manikandan, Marimuthu and Venugopal, Ashok Kumar and Nagpure, Atul S. and Chilukuri, Satyanarayana V. and Raja, Thirumalaiswamy} } @article {42993, title = {Protein-dependent membrane interaction of a partially disordered protein complex with oleic acid : Implications for cancer lipidomics}, journal = {Scientific Reports}, volume = {6}, year = {2016}, month = {OCT}, abstract = {

Bovine α-lactalbumin (BLA) forms cytotoxic complexes with oleic acid (OA) that perturbs tumor cell membranes, but molecular determinants of these membrane-interactions remain poorly understood. Here, we aim to obtain molecular insights into the interaction of BLA/BLA-OA complex with model membranes. We characterized the folding state of BLA-OA complex using tryptophan fluorescence and resolved residue-specific interactions of BLA with OA using molecular dynamics simulation. We integrated membrane-binding data using a voltage-sensitive probe and molecular dynamics (MD) to demonstrate the preferential interaction of the BLA-OA complex with negatively charged membranes. We identified amino acid residues of BLA and BLA-OA complex as determinants of these membrane interactions using MD, functionally corroborated by uptake of the corresponding α-LA peptides across tumor cell membranes. The results suggest that the α-LA component of these cytotoxic complexes confers specificity for tumor cell membranes through protein interactions that are maintained even in the lipid complex, in the presence of OA.

}, doi = {10.1038/srep35015}, author = {Chaudhuri, Arunima and Prasanna, Xavier and Agiru, Priyanka and Chakraborty, Hirak and Rydstrom, Anna and Ho, James C. S. and Svanborg, Catharina and Sengupta, Durba and Chattopadhyay, Amitabha} } @article {43644, title = {PVAc/PEDOT:PSS/graphene-iron oxide nanocomposite (GINC): an efficient thermoelectric material}, journal = {RSC Advances}, volume = {6}, year = {2016}, month = {FEB}, pages = {22453-22460}, abstract = {A green method for the synthesis of a graphene-iron oxide nanocomposite (GINC) and its PVAc based polymer nanocomposites was reported in an earlier communication. The fabricated PVAc-GINC film exhibited a conductivity of 2.18 x 104 S m(-1) with a Seebeck coefficient of 38.8 mu V K-1. Hence, the power factor (PF) reached a value of 32.90 mu W m(-1) K-2 which is 27 fold higher than a thermoelectric material based on a PVAc-graphene composite as reported in the contemporary literature. In continuation of the above mentioned study, PEDOT:PSS was used to further enhance the power factor (PT) and figure of merit (ZT) of the system. During evaluation, a PEDOT: PSS/GINC composite (5 : 95) showed a remarkable increase in various thermoelectric properties like electrical conductivity (8.0 x 10(4) S m(-1)) with a Seebeck coefficient of 25.42 mu V K-1 and thermal conductivity 0.90 m(-1) K-1. Hence PF and ZT reach up to 51.93 mW m(-1) K-2 and 0.017, respectively. To improve the mechanical strength of the polymer composite, cellulose fibre was also employed. By the addition of cellulose fibre, though the mechanical strength of the composite increases the PF reaches 5.6, which is 10 times lower than the PEDOT:PSS/GINC composite.}, doi = {10.1039/c5ra26138d}, author = {Dey, Abhijit and Maity, Arunava and Khan, Md Abdul Shafeeuulla and Sikder, Arun Kanti and Chattopadhyay, Santanu} } @article {45632, title = {Reduced graphene oxide modified electrodes for sensitive sensing of gliadin in food samples}, journal = {ACS Sensors}, volume = {1}, year = {2016}, month = {DEC}, pages = {1462-1470}, type = {Article}, abstract = {

Incidences of food allergies are on the rise, which can greatly affect the well-being of children as well as adults. Intolerance to gluten, a protein composite of gliadin and glutenin, present in wheat, barley, and rye and several cereals, can be the causative agent of celiac disease (CD) and other allergic reactions. A gluten-free diet has become essential for people affected by CD, and consequently, the amount of gluten in food products needs to be strictly controlled. In this paper, we report an electrochemical label-free immunosensor for ultrasensitive and specific detection of gliadin. The sensor takes advantage of the specific properties of porous reduced graphene oxide (prGO) covalently functionalized with anti-gliadin antibodies using 1-pyrenecarboxylic acid as linker molecule. Using differential pulse voltammetry (DPV) and [Fe(CN)6](3-/4-) as a redox probe, a decrease of current is linked to the presence of gliadin. The sensor achieved a detection limit of 1.2 ng mL(-1) over a 1.2-34 ng mL(-1) linear range with high selectivity. The advantages offered by this sensor are the possibility to regenerate the surface of the immunosensor, its rapid and ease of production, as well as applicability for the screening of gliadin concentrations in real food samples, as shown here.

}, keywords = {anti-gliadin antibody, food samples, gliadin, Immunosensor, Porous reduced graphene oxide}, issn = {2379-3694}, doi = {10.1021/acssensors.6b00608}, author = {Chekin, Fereshteh and Singh, Santosh K. and Vasilescu, Alina and Dhavale, Vishal M. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {43403, title = {Reductive cyclization of levulinic acid to gamma-valerolactone over non-noble bimetallic nanocomposite}, journal = {Industrial \& Engineering Chemistry Research}, volume = {55}, year = {2016}, month = {DEC}, pages = {13032-13039}, abstract = {Bimetallic nanoparticles have diverse applications in catalytic processes owing to the differences in individual properties that contribute to their increased catalytic activity. To further improve the efficiency, they are dispersed in an inert support that enhances the catalytic activity toward organic transformations. In this study, we report simple, facile, and cost-effective chemical route for the fabrication of nanocomposites with Fe-Ni bimetallic nanoparticles supported on montmorillonite (MMT) possessing variation in the Fe and Ni content. These composites are characterized with X-ray diffraction, transmission electron microscopy surface area, and NH3-TPD. Fe Ni bimetallic nanoparticles are well-dispersed within MMT structure having particle sizes of about 30-40 nm. Among various compositions of Fe-Ni/MMT catalysts, composite with 25\% Fe and 25\% Ni exhibits >99\% LA conversion with 98\% selectivity to GVL within 1 h. IPA is found to be better solvent for levulinic acid (LA) to gamma-valerolactone (GVL) conversion, while substantial leaching of iron takes place when water is used as a solvent. It is observed that bimetallic sites are responsible for reduction of LA, while strong acidic sites of MMT are favoring subsequent cyclization to GVL. XPS analysis of fresh and reused Fe-Ni/MMT composites suggest that the catalyst surface does not undergo any chemical change during successive cycles, and the catalytic activity is retained up to six cycles. The plausible mechanism for LA to GVL conversion involves reductive cyclization processes through formation of levulinate ester that undergoes lactonization due to synergism in bimetallic nanoparticles and MMT clay.}, doi = {10.1021/acs.iecr.6b03900}, author = {Kadu, Brijesh S. and Hengne, Amol M. and Biradar, Narayan S. and Rode, Chandrashekhar V. and Chikate, Rajeev C.} } @article {45871, title = {Relevance of small laboratory animals as models in translational research: challenges and road ahead}, journal = {Journal of Applied Pharmaceutical Science}, volume = {6}, year = {2016}, month = {MAY}, pages = {198-209}, type = {Article}, abstract = {Translational research using small laboratory animals is being done to demonstrate proof of concept, to study pharmacokinetics as well as to understand efficacy and safety of new drug molecules. During the evaluation of a drug candidate, the assessment of efficacy and safety is normally performed in different experiments using various animal models. In such experiments, efficacy is assessed by mimicking the disease state in animal model while safety is investigated in healthy animals. Inventing new drugs using biotechnological and nanotechnological approaches is becoming a major thrust area in drug research. Apart from this, the development of medicine from traditional knowledge like Ayurveda has emerged as major area for drug industry. Use of conventional in-vivo approaches may not prove useful to answer many questions. Transgenic/knock-out/knock-in animals are now getting space in pharmaceutical research for target identification and validation. Predictability of in-vivo research depends on scientific protocols and methods adopted for model selection and development. Various alternative approaches for in-vivo research are being followed. It is a fact that no animal model is 100 \% capable of mimicking the complex human body but still, researchers have not yet found any alternative model which can completely replace in-vivo models. This review is a holistic approach explaining the various animal models being used for translational research, animal ethical issues, alternative approaches available and provides a critical analysis of major issues/challenges faced in translational research using in-vivo approaches. }, doi = {10.7324/JAPS.2016.60531}, author = {Siddiqui, E. A. and Jagdale, P. and Ahire, K. and Jadhav, S. and Khan, S. A. and Bhosle, S. and Pal, A. and Jamdagni, P. and Chaudhari, B.} } @article {45877, title = {Removal of arsenite [As(III)] and arsenate [As(V)] ions from wastewater using TFA and TAFA resins: computational intelligence based reaction modeling and optimization}, journal = {Journal of environmental chemical engineering}, volume = {4}, year = {2016}, month = {DEC}, pages = {4275-4286}, type = {Article}, abstract = {Being significantly toxic, removal of arsenic forms an important part of the drinking- and waste-water treatment. Tannin is a polyphenol-rich substrate that efficiently and adsorptively binds to the multivalent metal ions. In this study, tannin-formaldehyde (TFA) and tannin-aniline-formaldehyde (TAFA) resins were synthesized and employed successfully for an adsorptive removal of arsenite [As(III)] and arsenate [As(V)] ions from the contaminated water. Next, a computational intelligence (CI) based hybrid strategy was used to model and optimize the resin-based adsorption of As(III) and As(V) ions for securing optimal reaction conditions. This strategy first uses an exclusively reaction data driven modeling strategy, namely, genetic programming (GP) to predict the extent (\%) of As(III)/As(V) adsorbed on TFA and TAFA resins. Next, the input space of the GP-based models consisting of the reaction condition variables/parameters was optimized using genetic algorithm (GA) method; the objective of this optimization was to maximize the adsorption of As(III) and As(V) ions on the two resins. Finally, the sets of optimal reaction conditions provided by GP-GA hybrid method were verified experimentally the results of which indicate that the optimized conditions have lead to 0.3\% and 1.3\% increase in the adsorption of As(III) and As(V) ions on TFA resin. More significantly, the optimized conditions have increased the adsorption of As(III) and As(V) on TAFA resin by 3.02\% and 12.77\%, respectively. The GP-GA based strategy introduced here can be gainfully utilized for modeling and optimization of similar type of contaminant-removal processes. }, doi = {10.1016/j.jece.2016.09.030}, author = {Patil-Shinde, V. and Mulani, K. B. and Donde, K. and Chavan, N. N. and Ponrathnam, S. and Tambe, S. S.} } @article { ISI:000381235800004, title = {Replica exchange molecular dynamics study of dimerization in prion protein: multiple modes of interaction and stabilization}, journal = {Journal of Physical Chemistry B}, volume = {120}, number = {30}, year = {2016}, month = {AUG}, pages = {7332-7345}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The pathological forms of prions are known to be a result of misfolding, oligomerization, and aggregation of the cellular prion. While the mechanism of misfolding and aggregation in prions has been widely studied using both experimental and computational tools, the structural and energetic characterization of the dimer form have not garnered as much attention. On one hand dimerization can be the first step toward a nucleation-like pathway to aggregation, whereas on the other hand it may also increase the conformational stability preventing self-aggregation. In this work, we have used extensive all-atom replica exchange molecular dynamics simulations of both monomer and dimer forms of a mouse prion protein to understand the structural, dynamic, and thermodynamic stability of dimeric prion as compared to the monomeric form. We show that prion proteins can dimerize spontaneously being stabilized by hydrophobic interactions as well as intermolecular hydrogen bonding and salt bridge formation. We have computed the conformational free energy landscapes for both monomer and dimer forms to compare the thermodynamic stability and misfolding pathways. We observe large conformational heterogeneity among the various modes of interactions between the monomers and the strong intermolecular interactions may lead to as high as 20\% beta-content. The hydrophobic regions in helix-2, surrounding coil regions, terminal regions along with the natively present beta-sheet region appear to actively participate in prion-prion intermolecular interactions. Dimerization seems to considerably suppress the inherent dynamic instability observed in monomeric prions, particularly because the regions of structural frustration constitute the dimer interface. Further, we demonstrate an interesting reversible coupling between the Q160-G131 interaction (which leads to inhibition of beta-sheet extension) and the G131-V161 H-bond formation.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.6b03690}, author = {Chamachi, Neharika G. and Chakrabarty, Suman} } @article { ISI:000373762400005, title = {Reporter nanoparticle that monitors its anticancer efficacy in real time}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {113}, number = {15}, year = {2016}, month = {APR}, pages = {E2104-E2113}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

The ability to monitor the efficacy of an anticancer treatment in real time can have a critical effect on the outcome. Currently, clinical readouts of efficacy rely on indirect or anatomic measurements, which occur over prolonged time scales postchemotherapy or postimmunotherapy and may not be concordant with the actual effect. Here we describe the biology-inspired engineering of a simple 2-in-1 reporter nanoparticle that not only delivers a cytotoxic or an immunotherapy payload to the tumor but also reports back on the efficacy in real time. The reporter nanoparticles are engineered from a novel two-staged stimuli-responsive polymeric material with an optimal ratio of an enzyme-cleavable drug or immunotherapy (effector elements) and a drug function-activatable reporter element. The spatiotemporally constrained delivery of the effector and the reporter elements in a single nanoparticle produces maximum signal enhancement due to the availability of the reporter element in the same cell as the drug, thereby effectively capturing the temporal apoptosis process. Using chemotherapy-sensitive and chemotherapy-resistant tumors in vivo, we show that the reporter nanoparticles can provide a real-time noninvasive readout of tumor response to chemotherapy. The reporter nanoparticle can also monitor the efficacy of immune checkpoint inhibition in melanoma. The self-reporting capability, for the first time to our knowledge, captures an anticancer nanoparticle in action in vivo.

}, keywords = {chemotherapy, immunotherapy, monitoring, nanoparticle, reporter}, issn = {0027-8424}, doi = {10.1073/pnas.1603455113}, author = {Kulkarni, Ashish and Rao, Poornima and Natarajan, Siva and Goldman, Aaron and Sabbisetti, Venkata S. and Khater, Yashika and Korimerla, Navya and Chandrasekar, Vineethkrishna and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article {43589, title = {RNAi of selected candidate genes interrupts growth and development of Helicoverpa armigera}, journal = {Pesticide Biochemistry and Physiology}, volume = {133}, year = {2016}, month = {OCT}, pages = {44-51}, abstract = {Helicoverpa armigera is one of the major crop pests and is less amenable to current pest control approaches. RNA interference (RNAi) is emerging as a potent arsenal for the insect pest control over current methods. Here, we examined the effect on growth and development in H. armigera by targeting various enzymes/proteins such as proteases like trypsins (HaTry2, 3, 4 and 6), chymotrypsin (HaChy4) and cysteine protease like cathepsin (HaCATHL); glutathione S-transferases (HaGST1a, 6 and 8); esterases (HaAce4, HaJHE); catalase (HaCAT); super-oxide-dismutase (HaCu/ZnSOD); fatty acid binding protein (HaFabp) and chitin deacetylase (HaCda5b) through dsRNA approach. Significant downregulation of cognate mRNA expression and reduced activity of trypsin and GST-like enzyme were evident upon feeding candidate dsRNAs to the larvae. Among these, the highest mortality was observed in HaAce4 dsRNA fed larvae followed by HaJHE; HaCAT; HaCuZnSOD; HaFabp and HaTry3 whereas remaining ones showed relatively lower mortality. Furthermore, the dsRNA fed larvae showed significant reduction in the larval mass and abnormalities at the different stages of H. armigera development compared to their control diets. For example, malformed larvae, pupae and moth at a dose of 60 pg/day were evident in high number of individual insects fed on dsRNA containing diets. Moreover, the growth and development of insects and moths were retarded in dsRNA fed larvae. These findings might provide potential new candidates for designing effective dsRNA as pesticide in crop protection. (C) 2016 Elsevier Inc. All rights reserved.}, doi = {10.1016/j.pestbp.2016.03.006}, author = {Chikate, Yojana R. and Dawkar, Vishal V. and Barbole, Ranjit S. and Tilak, Priyadarshini V. and Gupta, Vidya S. and Giri, Ashok P.} } @article {43591, title = {Role of acceptor strength on OFET properties of small molecular organic semiconducting materials with D-A-D architecture}, journal = {Synthetic Metals}, volume = {220}, year = {2016}, month = {OCT}, pages = {236-246}, abstract = {Two organic semiconducting materials 2,5-didodecyl-3,6-bis(4-(11-dodecyl-11H-benzo[a]carbazol-8yl)phenyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione. (BCDPP) and 1,5-didodecyl-3,7-bis(4-(11-dodecyl-11H-benzo[a]carbazol-8-yl)phenyl)dipyrrolo[3,2-b:3{\textquoteright},2{\textquoteright}-e]pyrazine-2,6(1H,5H)-dione (BCPzDP) with D-A-D architecture have been designed, synthesized and well characterized. Both the materials have benzocarbazole donor end-capping units. While BCDPP contains well explored diketopyrrolopyrrole (DPP), BCPzDP possesses electron deficient dipyrrolopyrazinedione (PzDP) as acceptor moiety. The importance of the nature of acceptor moiety in tuning the charge transport properties of the synthesized materials is explored. Thermal, photo-physical and electrochemical properties of these materials are measured and solution processed OFETs are fabricated. OFETs with BCDPP show unipolar p-type semiconducting properties with hole mobility of 1.02 x 10(-4) cm(2) V-1 s(-1) and OFETs of BCPzDP exhibit ambipolar charge transport behaviour with optimal saturation hole and electron mobilities of 0.0054 and 0.0013 cm(2) V-1 s(-1), respectively. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.synthmet.2016.06.006}, author = {Sasikumar, M. and Bharath, D. and Kumar, G. Siva and Chereddy, Narendra Reddy and Chithiravel, S. and Krishnamoorthy, K. and Shanigaram, Balaiah and Bhanuprakash, K. and Rao, V. Jayathirtha} } @article { ISI:000370489600002, title = {Role of aliphatic hydrocarbon content in non-solvating porogens toward porosity of cross-linked microbeads}, journal = {Polymer}, volume = {86}, year = {2016}, month = {MAR}, pages = {8-14}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Megaporous spherical acrylate copolymer beads were synthesized by suspension polymerization using non-solvating porogens. Non-solvating porogens with higher aliphatic hydrocarbon content generated megaporous morphology with lower surface area. Surface area increased and inversely megaporosity was decreased with decrease in the aliphatic hydrocarbon content of porogen. Megaporosity (5.47 mu m) and pore volume of 5.52 cm(3)/g was obtained with n-decanol. Thermal property of copolymer is a function of type (rigidity/flexibility/elemental composition) and concentration (cross-link density) of monomer and cross-linker. Copolymer containing rigid cross-linker (divinylbenzene) had better thermal stability over copolymer with flexible cross-linker (ethylene dimethacrylate). Further, higher concentration of rigid cross-linker or lower concentration of flexible cross-linker enhanced the thermal stability. Porous polymers are potentially recognized as a solid support for solid-phase synthesis. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Cross-linked microbeads, Interfacial tension, Megaporosity, Non-solvating porogens, Thermal properties}, issn = {0032-3861}, doi = {10.1016/j.polymer.2016.01.022}, author = {Mane, Sachin and Badiger, Manohar V. and Rajan, C. R. and Ponrathnam, Surendra and Chavan, Nayaku} } @conference {45823, title = {Role of Rhamnolipid: A biosurfactant in methane gas hydrate formation kinetics}, booktitle = {Proceedings of The First International Conference on Recent Advances in Bioenergy Research}, year = {2016}, month = {FEB}, publisher = {Sardar Swaran Singh Natl Inst Bio-Energy}, organization = {Sardar Swaran Singh Natl Inst Bio-Energy}, address = {7th Floor, Vijaya Building, 17, Barakhamba Rd, New Delhi, 110 001, India}, abstract = {

Naturally occurring methane gas hydrate is a vast source of methane gas which is trapped in crystalline ice-like structure present in permafrost regions and under the sea in outer continental margins. It is purposed that total amount of carbon in the form of methane hydrates is almost twice the carbon content in all the fossil fuel reserves put together, and hence these are supposed to be the future potential energy resource. This paper investigates the laboratory investigations on effect of a biosurfactant rhamnolipid on methane hydrate formation kinetics. Rhamnolipid was produced by Pseudomonas aeruginosa strain A11. The presence of P. aeruginosa has been reported in Gulf of Mexico gas hydrate samples. Biosurfactant reduced the surface tension of water from 72 to 36 mN/m with CMC of 70 mg/L. The biosurfactant dose is studied at two different concentrations in the solution at 100 and 1000 ppm. Kinetic of hydrate formation and growth is compared at 0, 100, and 1000 ppm of rhamnolipid showing that rhamnolipid acts as a hydrate promoter at these concentrations. Thus, small dosages of rhamnolipids produced by P. aeruginosa strain A11 must clearly affect the gas hydrate formation kinetics in natural sites (as in Gulf of Mexico).

}, keywords = {Induction time, methane hydrate, Potential energy resource, Pseudomonas aeruginosa, Rhamnolipid}, isbn = {978-81-322-2773-1; 978-81-322-2771-7}, doi = {10.1007/978-81-322-2773-1_25}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Kumar, Rajnish and Singh, Anil Kumar and Kumar, Pushpendra and Balomajumder, Chandrajit and Laik, Sukumar}, editor = {Kumar, S and Khanal, SK and Yadav, YK} } @article {43617, title = {Scalability of coarse-grained potentials generated from iterative boltzmann inversion forpolymers: case study on polycarbonates}, journal = {Macromolecular Theory and Simulations}, volume = {25}, year = {2016}, month = {MAY}, pages = {274-286}, abstract = {Using systematic coarse-grained (CG) techniques such as iterative Boltzmann inversion (IBI) is an efficient means to simulate high molecular weight polymer melts within reasonable computational time. One drawback of such an approach is however the need to carry out extensive atomistic simulations in order to extrapolate the necessary distributions to derive the inter and intrabead force field parameters. Here it is shown that it is possible to use atomistic simulations of relative short oligomers to develop the CG model for high molecular weight polymers. In particular for the specific case of polycarbonates, it is found that the structural properties (end-to-end distance, radius of gyration and their distributions) are similar irrespective of whether the CG potentials are derived from 5-mer or 10-mer melt systems. Dynamical properties of the CG systems are smoother and faster than the atomistic ones. Scaling factor, derived by overlapping the CG mean square displacement curves (obtained from different CG IBI potentials) over the atomistic ones, also scales the autocorrelation functions. A prediction of the dynamical scaling factor in the case of the unavailability of atomistic simulations is also discussed. The dynamical properties of the CG melts are modeled reasonably well by all the CG potentials derived from atomistic simulations of short oligomers.}, doi = {10.1002/mats.201500079}, author = {Choudhury, Chandan Kumar and Carbone, Paola and Roy, Sudip} } @article { ISI:000369658100031, title = {Seeding of Au on CdSe/CdS nanoplates using Langmuir-Blodgett technique}, journal = {RSC Advances}, volume = {6}, number = {18}, year = {2016}, month = {JAN}, pages = {14658-14665}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Oleyl amine capped CdSe/CdS nanoplates were synthesized by hot injection technique which formed a stable monolayer over both a water subphase and an aqueous HAuCl4 subphase using a Langmuir-Blodgett trough. Au islands were generated at the edge as well as on one specific surface of the flat nanoplates by exploiting the reducing capacity of oleyl amine to form Au nanoseeds from AuCl4- ions. The initial Au nanoseeds changed to a shell surrounding these nanoplates on prolonged exposure to the subphase containing the Au precursor. Monolayer of the hybrid structures was deposited onto suitable substrates for characterization by a number of different techniques and to study the photocatalytic activity. The same substrate with the monolayers could be re-used in several cycles of photocatalysis.

}, issn = {2046-2069}, doi = {10.1039/c5ra26018c}, author = {Das, Subhasis and Satpati, Biswarup and Chauhan, Himani and Deka, Sasanka and Ghosalya, Manoj Kumar and Gopinath, Chinnakonda S. and Bala, Tanushree} } @article { ISI:000362736300014, title = {Selective solid-phase extraction of metal for water decontamination}, journal = {Journal of Applied Polymer Science}, volume = {133}, number = {1}, year = {2016}, month = {JAN}, pages = {42849}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Metal-contaminated industrial effluent is a major concern for human health. Therefore, the removal of metal is of primary importance. In this study, metals were selectively extracted from water. Selective metal recovery was studied with a crown-ether-based polymer, wherein the selectivity was observed for strontium over lead. Parameters influencing the metal recovery, such as the contact time, adsorbent dosage, and metal-ion concentration, were evaluated. Interestingly, the adsorption rate of strontium was exponentially increased for the initial 4 h, and lead was adsorbed exponentially after 6 h. Notably, 98\% strontium adsorption and 64\% lead adsorption were obtained in 24 h. The Langmuir adsorption isotherm was in good agreement and demonstrated that the reactive sites of the adsorbent were homogeneous with monolayer metal adsorption with an adsorbent. The Freundlich adsorption isotherm was not obeyed by both metals. The pseudo-first-order and pseudo-second-order kinetics indicated that strontium was adsorbed by chemisorption and lead was adsorbed by physisorption. (c) 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 132, 42849.

}, keywords = {Adsorption, copolymers, crosslinking, kinetics, radical polymerization}, issn = {0021-8995}, doi = {10.1002/app.42849}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @article {43609, title = {Selenium-containing fused bicyclic heterocycle diselenolodiselenole: field effect transistorstudy and structure property relationship}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {JUL}, pages = {18222-18230}, abstract = {The first application of the diselenolodiselenole (C4Se4) heterocycle as an active organic field effect transistor materials is demonstrated here. C4Se4 derivatives (2a-2d) were obtained by using a newly developed straightforward diselenocyclization protocol, which includes the reaction of diynes with selenium powder at elevated temperature. C4Se4 derivatives exhibit strong donor characteristics and planar structure (except 2d). The atomic force microscopic analysis and thin-film X-ray diffraction pattern of compounds 2a-2d indicated the formation of distinct crystalline films that contain large domains. A scanning electron microscopy study of compound 2b showed development of symmetrical grains with an average diameter of 150 nm. Interestingly, 2b exhibited superior hole mobility, approaching 0.027 cm(2) V-1 s(-1) with a transconductance of 9.2 mu S. This study correlate the effect of p-stacking, Se center dot center dot center dot Se intermolecular interaction, and planarity with the charge transport properties and performance in the field effect transistor devices. We have shown that the planarity in C4Se4 derivatives was achieved by varying the end groups attached to the C4Se4 core. In turn, optoelectronic properties can also be tuned for all these derivatives by end-group variation.}, doi = {10.1021/acsami.6b02154}, author = {Debnath, Sashi and Chithiravel, Sundaresan and Sharma, Sagar and Bedi, Anjan and Krishnamoorthy, Kothandam and Zade, Sanjio S.} } @article { ISI:000372612600009, title = {Signatures of protein thermal denaturation and local hydrophobicity in domain specific hydration behavior: a comparative molecular dynamics study}, journal = {Molecular Biosystems}, volume = {12}, number = {4}, year = {2016}, month = {FEB}, pages = {1139-1150}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We investigate, using atomistic molecular dynamics simulations, the association of surface hydration accompanying local unfolding in the mesophilic protein Yfh1 under a series of thermal conditions spanning its cold and heat denaturation temperatures. The results are benchmarked against the thermally stable protein, Ubq, and behavior at the maximum stability temperature. Local unfolding in Yfh1, predominantly in the beta sheet regions, is in qualitative agreement with recent solution NMR studies; the corresponding Ubq unfolding is not observed. Interestingly, all domains, except for the beta sheet domains of Yfh1, show increased effective surface hydrophobicity with increase in temperature, as reflected by the density fluctuations of the hydration layer. Velocity autocorrelation functions (VACF) of oxygen atoms of water within the hydration layers and the corresponding vibrational density of states (VDOS) are used to characterize alteration in dynamical behavior accompanying the temperature dependent local unfolding. Enhanced caging effects accompanying transverse oscillations of the water molecules are found to occur with the increase in temperature preferentially for the beta sheet domains of Yfh1. Helical domains of both proteins exhibit similar trends in VDOS with changes in temperature. This work demonstrates the existence of key signatures of the local onset of protein thermal denaturation in solvent dynamical behavior.

}, issn = {1742-206X}, doi = {10.1039/c6mb00017g}, author = {Chatterjee, Prathit and Sengupta, Neelanjana} } @article { ISI:000375346500029, title = {Specific receptor for hydrazine: mapping the in situ release of hydrazine in live cells and in an in vitro enzymatic assay}, journal = {Chemical Communications}, volume = {52}, number = {36}, year = {2016}, month = {MAR}, pages = {6166-6169}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report a new chemodosimetric reagent capable of detecting hydrazine in the presence of several other competing amine derivatives and ionic analytes of biological relevance. This reagent has been utilized for real time monitoring of in situ N2H4 release during the metabolism of a crucial tuberculosis drug, isoniazid, in live HepG2 cells. The fluorescence response of the reagent based on its specific reaction with N2H4 is used for developing an in vitro assay for aminoacylase-1.

}, issn = {1359-7345}, doi = {10.1039/c6cc01787h}, author = {Ali, Firoj and Anila, H. A. and Taye, Nandaraj and Mogare, Devraj G. and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000368973000001, title = {Structural analysis of a penicillin V acylase from pectobacterium atrosepticum confirms the importance of two Trp residues for activity and specificity}, journal = {Journal of Structural Biology}, volume = {193}, number = {2}, year = {2016}, month = {FEB}, pages = {85-94}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Penicillin V acylases (PVA) catalyze the deacylation of the beta-lactam antibiotic phenoxymethylpenicillin (Pen V). They are members of the Ntn hydrolase family and possess an N-terminal cysteine as the main catalytic nucleophile residue. They form the evolutionarily related cholylglycine hydrolase (CGH) group which includes bile salt hydrolases (BSH) responsible for bile deconjugation. Even though a few PVA and BSH structures have been reported, no structure of a functional PVA from Gram-negative bacteria is available. Here, we report the crystal structure of a highly active PVA from Gram-negative Pectobacterium atrosepticum (PaPVA) at 2.5 angstrom resolution. Structural comparison with PVAs from Gram-positive bacteria revealed that PaPVA had a distinctive tetrameric structure and active site organization. In addition, mutagenesis of key active site residues and biochemical characterization of the resultant variants elucidated the role of these residues in substrate binding and catalysis. The importance of residue Trp23 and Trp87 side chains in binding and correct positioning of Pen V by PVAs was confirmed using mutagenesis and substrate docking with a 15 ns molecular dynamics simulation. These results establish the unique nature of Gram-negative CGHs and necessitate further research about their substrate spectrum. (C) 2015 Elsevier Inc. All rights reserved.

}, keywords = {Aromatic stacking, Cholylglycine hydrolase, molecular dynamics, Mutagenesis, Oligomeric interactions}, issn = {1047-8477}, doi = {10.1016/j.jsb.2015.12.008}, author = {Avinash, Vellore Sunder and Panigrahi, Priyabrata and Chand, Deepak and Pundle, Archana and Suresh, Cheravakattu Gopalan and Ramasamy, Sureshkumar} } @article { ISI:000373935600005, title = {Structural insight of NICD-MAML interactions: virtual screening, docking and molecular dynamics study for the identification of potential inhibitor}, journal = {Letters in Drug Design \& Discovery}, volume = {13}, number = {4}, year = {2016}, month = {JAN}, pages = {301-313}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Activation of Notch signalling pathway is triggered by binding of NICD to transcription factor CSL and transcriptional co-activator MAML, which involves in various biological functions as well as progression of diseases. Recent prediction shows suppression of cancer causing genes of this pathway through inhibition of NICD-MAML interaction. Through virtual screening against {\textquoteleft}{\textquoteleft}NCI Diversity 3{\textquoteright}{\textquoteright} of Zinc database, we identified a potential inhibitor {\textquoteleft}{\textquoteleft}ZINC01690699{\textquoteright}{\textquoteright} (1-N,4-N-bis[3-(1H-benzimidazol-2-yl)phenyl]benzene-1,4-dicarboxamide; 1-N, 4-dicarboxamide) possessing highest binding affinity to block the two distinct Binding Sites of NICD to inhibit NICD-MAML interaction and also found the most imperative and essential Binding Site (Site I). Inhibition of this interaction caused by binding of ZINC01690699 is validated by protein-protein docking and the prolonged binding as well as stability of NICD-Inhibitor complex is supported by molecular dynamics simulation. The study not only identifies the best inhibitor but also proposes a potential drug for the treatment of cancers.

}, keywords = {free energy of binding, MAML, NICD, Notch signalling, potential inhibitor, ZINC01690699}, issn = {1570-1808}, doi = {10.2174/1570180812666150819003634}, author = {Sinha, Noopur and Chowdhury, Saikat and Sarkar, Ram Rup} } @article { ISI:000380167200011, title = {Studies on the static and dynamic properties of different types of polyester industrial yarns}, journal = {Journal of the Textile Institute}, volume = {107}, number = {9}, year = {2016}, month = {OCT}, pages = {1175-1184}, publisher = {TAYLOR \& FRANCIS LTD}, address = {2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND}, abstract = {

Four major types of polyester industrial yarns, viz. high tenacity (HT), high modulus low shrinkage (HMLS), low shrinkage (LS) and super low shrinkage (SLS) polyester yarns, were studied for their static and dynamic properties. An attempt has been made to establish a linkage between static and dynamic properties of these yarns with its structure and with its end applications. HMLS and HT polyester yarns have lower tan delta and work loss, which are the desired characteristics required for its end applications which include tire and conveyer belt. Higher overall orientation and higher fraction of tie molecules helped to achieve these properties in HT and HMLS polyester yarns. LS and SLS polyester yarns are mostly used for static applications. Low thermal shrinkage is the key requirement for the downstream processes of these yarns. Lower amorphous orientation in these two yarns is primarily responsible for achieving very low thermal shrinkage. A good co-relation has been established between the peak temperature of work loss (in slow speed hysteresis test) and the peak temperature of tan delta (in high-speed dynamic test).

}, keywords = {creep, modulus, polyester, shrinkage, tan delta, work loss}, issn = {0040-5000}, doi = {10.1080/00405000.2015.1097087}, author = {Samui, Barun Kumar and Dasgupta, Saikat and Mukhopadhyay, R. and Ramesh, C. and Chakrabarty, Debabrata} } @article { ISI:000375270600080, title = {Surface modification of aligned CdO nanosheets and their enhanced field emission properties}, journal = {RSC Advances}, volume = {6}, number = {47}, year = {2016}, month = {APR}, pages = {41261-41267}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Porous aligned CdO nanosheets were grown on a cadmium (Cd) substrate by the simple and cost effective method of thermal annealing. Further, decoration of gold (Au) nanoparticles on the porous aligned CdO nanosheets (specimen A) was achieved by coating with a Au thin film and subsequent annealing treatment. The average diameters of decorated Au nanoparticles were found to be 15 nm, 21 nm and 28 nm for the Au thin films with 20 s, 40 s and 60 s (specimens B, C, and D) coating times. Detailed characterizations, such as structural and morphological analysis of porous CdO nanosheets and Au/CdO nanocomposite (Au decorated porous CdO nanosheets), have been carried out using a Field Emission Scanning Electron Microscope (FESEM), X-ray diffraction (XRD) and a Transmission Electron Microscope (TEM). Field emission studies of specimens A, B, C and D were carried out in the planar diode configuration. Turn-on fields of 1.9 V mu m(-1), 1.1 V mu m(-1), 2.4 V mu m(-1) and 2.8 V mu m(-1) have been found for the emission current density of 10 RA cm(-2) for specimens A, B, C and D, respectively. The observed low turn -on field of specimen B (Au diameter of 15 nm) was found to be superior to other semiconducting nanostructures reported in the literature. The field emission current stability over a period of 3 h at the preset current density of 1 RA cm(-2) is found to be excellent for all specimens. To the best of our knowledge, field emission studies along with surface modification of porous aligned CdO nanosheets have not been reported in the literature. The simple synthesis route, facile surface modification and the superior field emission results make the present emitter very suitable for micro/nano electronic devices.

}, issn = {2046-2069}, doi = {10.1039/c5ra28000a}, author = {Bagal, Vivekanand S. and Patil, Girish P. and Deore, Amol B. and Suryawanshi, Sachin R. and Late, Dattatray J. and More, Mahendra A. and Chavan, Padmakar G.} } @article { ISI:000372766400005, title = {Surface tailored PS/TiO2 composite nanofiber membrane for copper removal from water}, journal = {Journal of Colloid and Interface Science}, volume = {469}, year = {2016}, month = {MAY}, pages = {31-37}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Polystyrene (PS)/TiO2 composite nanofiber membranes have been fabricated by electrospinning process for Cu2+ ions removal from water. The surface properties of the polystyrene nanofibers were modulated by introducing TiO2 nanoparticles. The contact angle of the PS nanofiber membrane was found to be decreased with increasing concentration of TiO2, depicted enhanced hydrophilicity. These membranes were highly effective in adsorbing Cu2+ ions from water. The adsorption capacity of these membranes was found to be 522 mg/g, which is significantly higher than the results reported by other researchers. This was attributed to enhanced hydrophilicity of the PS/TiO2 composite nanofiber membranes and effective adsorption property of TiO2 nanoparticles. (C) 2016 Elsevier Inc. All rights reserved.

}, keywords = {electrospinning, Metal ion adsorption, Nanofiber, TiO2, Water treatment/purification}, issn = {0021-9797}, doi = {10.1016/j.jcis.2016.01.054}, author = {Wanjale, Santosh and Birajdar, Mallinath S. and Jog, Jyoti Prakash and Neppalli, Ramesh and Causin, Valerio and Karger-Kocsis, Jozsef and Lee, Jonghwi and Panzade, Prasad} } @article {43426, title = {Switch-on NIR probe for specific detection of Hg2+ ion in aqueous medium and in mitochondria}, journal = {Inorganic Chemistry}, volume = {55}, year = {2016}, month = {NOV}, pages = {12052-12060}, abstract = {A new 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based probe molecule (L) is synthesized for specific binding to Hg2+ ion in physiological condition with an associated luminescence ON response in the near-IR region of the spectrum. Appropriate functionalization in the 5-position of each of two pyrrole moieties with styryl functionality in a BODIPY core helped us in achieving the extended conjugation and a facile intramolecular charge transfer transition with a narrow energy gap for frontier orbitals. This accounted for a poor emission quantum yield for the probe molecule L. Binding to. Hg2+ helped in interrupting the facile intramolecular charge transfer (ICT) process that was initially operational for L. This resulted in a hypsochromic shift of absorption band and a turn-on luminescence response with lambda(Em)(max) of 650 nm on specific binding to Hg2+. Observed spectral changes are rationalized based on quantum chemical calculations. Interestingly, this reagent is found to be localized preferentially in the mitochondria of the live human colon cancer (Hct116) cells. Mitochondria is one of the major targets for localization of He2+, which actually decreases the mitochondrial membrane potential and modifies various proteins having sulfudryl functionality(ies) to cause cell apoptosis. Considering these, ability of the present reagent to specifically recognize Hg2+] in the mitochondrial region of the live Hct116 cells has significance.}, doi = {10.1021/acs.inorgchem.6b02233}, author = {Agarwalla, Hrideshg and Mahajan, Pankaj S. and Sahu, Debashis and Taye, Nandaraj and Ganguly, Bishwajit and Mhaske, Santosh B. and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000370420000003, title = {Synthesis and characterization of thermally stable polyimides with a pendent phenothiazine unit based on new diamine 10-(3,5-diaminobenzoyl)phenothiazine}, journal = {High Performance Polymers}, volume = {28}, number = {1}, year = {2016}, month = {FEB}, pages = {26-33}, publisher = {SAGE PUBLICATIONS LTD}, address = {1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND}, abstract = {

A novel diamine 10-(3,5-diaminobenzoyl)phenothiazine (DBPT) with a side chain containing phenothiazine unit was synthesized. A new family of polyimides (PIs) containing phenothiazine unit in the side chains has been successfully synthesized by direct polycondensation of DBPT with pyromellitic dianhydride, 3,3{\textquoteright},4,4{\textquoteright}-benzophenone tertacarboxylic dianhydride, and 4,4{\textquoteright}-oxydiphthalic anhydride (ODA) via a conventional two-step chemical imidization process. The yield of polymers was good enough, which were soluble in most organic solvents. The molecular orbital energy gaps, thermal stability, and crystallinity of PIs were investigated by molecular modeling, thermogravimetric analysis, and wide-angle X-ray scattering, respectively. Thermal properties of polymers were good enough to permit the use of these PIs in various applications; only 49\% weight loss is detected at 900 degrees C in nitrogen atmosphere. X-Ray diffraction clearly reveals the amorphous nature of PIs. A quantum modeling study (density functional theory) has shown the influence of dianhydride structure on the energy difference of highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels.

}, keywords = {phenothiazine-containing diamine, Polyimide, thermally stable polymer}, issn = {0954-0083}, doi = {10.1177/0954008314568877}, author = {Ghorpade, Ravindra V. and Thorave, Asmita K. and Rajan, C. R. and Chavan, Nayaku and Ponrathnam, S.} } @article { ISI:000373739700025, title = {Synthesis and docking studies of pyrazine-thiazolidinone hybrid scaffold targeting dormant tuberculosis}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {26}, number = {9}, year = {2016}, month = {MAY}, pages = {2224-2228}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The persistence of Mycobacterium tuberculosis (MTB) in dormant stage assists the pathogen to develop resistance against current antimycobactrial drugs. To address this issue, we report herein the synthesis of N-(4-oxo-2 substituted thiazolidin-3yl) pyrazine-2-carbohydrazide derivatives designed by following the molecular hybridization approach using pyrazine and thiazolidenone scaffolds. The compounds were evaluated against MTB H37Ra and Mycobacterium bovis BCG in dormancy model. Most of the compounds had IC50 values in 0.3-1 mu g/ml range. The active compounds were further tested for anti-proliferative activity against THP-1, Panc-1, A549, and MCF-7 cell lines using MTT assay and exhibited no significant cytotoxicity. We also report molecular docking studies using active analogs and MTB Decaprenylphosphoryl-beta-D-ribose-2{\textquoteright}-epimerase (DprE1) to rationalize the biological activity and to provide an insight into the probable mechanism of action and binding mode of hybridized structures. The results obtained validate the use of molecular hybridization approach and also suggest that reported compounds can provide a novel pharmacophore to synthesize lead compounds against dormat MTB. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {docking, Dormant, Hybrid design, Pyrazine, Thiazolidenone, tuberculosis}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2016.03.055}, author = {Chitre, T. S. and Asgaonkar, K. D. and Miniyar, P. B. and Dharme, A. B. and Arkile, Manisha A. and Yeware, A. and Sarkar, Dhiman and Khedkar, Vijay M. and Jha, Prakash C.} } @article { ISI:000373619000021, title = {Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets}, journal = {Journal of Physics D-Applied Physics}, volume = {49}, number = {14}, year = {2016}, month = {APR}, pages = {145301}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).

}, keywords = {FeV3O8, field emission, nanosheets}, issn = {0022-3727}, doi = {10.1088/0022-3727/49/14/145301}, author = {Badadhe, Satish S. and Suryawanshi, Sachin R. and Naphade, Rounak A. and Chaudhary, Minakshi V. and More, Mahendra A. and Shelke, Manjusha V. and Ogale, Satishchandra B.} } @article { ISI:000379253100009, title = {Synthesis of 2-phenoxy-2-phenylethyl acrylate and copolymerization with 2-phenylethyl acrylate: estimation of monomer reactivity ratios, thermal and optical properties}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {53}, number = {7}, year = {2016}, month = {MAY}, pages = {457-464}, publisher = {TAYLOR \& FRANCIS INC}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

A new aromatic based monomer 2-phenoxy-2-phenylethyl acrylate (PPEA) was synthesized. Copolymers of PPEA with 2-phenylethyl acrylate (PEA) were prepared by free radical polymerization. The reactivity ratios were estimated using various graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. Optical properties of polymers such as refractive indices and UV-Visible absorption were investigated. The glass transition temperature and thermal degradation behavior of the copolymers were studied. Combined with the RI, transparency and thermal properties, prepared copolymers hold great promise as materials for intraocular lens applications.

}, keywords = {2-Phenoxy-2-phenylethyl acrylate, 2-phenylethyl acrylate, copolymerization, Optical properties, reactivity ratios, Thermal properties}, issn = {1060-1325}, doi = {10.1080/10601325.2016.1176447}, author = {Ghorpade, Ravindra V. and Ponrathnam, Surendra and Chavan, Nayaku} } @article { ISI:000380018700009, title = {Synthesis of renewable copolyacetals with tunable degradation}, journal = {Macromolecular Chemistry and Physics}, volume = {217}, number = {12}, year = {2016}, month = {JUN}, pages = {1396-1410}, publisher = {WILEY-V C H VERLAG GMBH}, address = {POSTFACH 101161, 69451 WEINHEIM, GERMANY}, abstract = {

Acetal metathesis copolymerization (AMCP) of renewable isohexide diacetals and aliphatic long-chain diacetals is reported and access to a small family of copolyacetals has been established. Crucial 1-2D NMR and MALDI-ToF-MS findings unambiguously confirm the existence of a copolymeric structure. In a stark contrast to the earlier reported isohexide-polyacetals, the current copolyacetals reveal very slow degradation. Hydrolytic degradation of copolyacetal pellets is extremely slow at pH 7, whereas only 30\% degradation over a period of 15 d is observed in 9 M hydrochloric acid solution. GPC investigations reveal that with increasing chain-length the rate of degradation reduces, whereas copolyacetals with short-chain aliphatic segments display a faster degradation profile. The reduced rate of degradation can be attributed to the hydrophobic nature of long-chain acetal segments. In situ NMR spectroscopy reveals the existence of formates, hemiacetals, and diols as degradation products. Thus, the rate of degradation can be tuned by the judicious choice of isohexide-diacetal and linear-diacetals in a copolyacetal.

}, keywords = {copolyacetals, degradable polymers, diacetals, isohexides, renewable polymers}, issn = {1022-1352}, doi = {10.1002/macp.201600071}, author = {Rajput, Bhausaheb S. and Chander, Umesh and Arole, Kailash and Stempfle, Florian and Menon, Shamal K. and Mecking, Stefan and Chikkali, Samir H.} } @article {43435, title = {Synthesis of (+/-)-thia-calanolide A, its resolution and in vitro biological evaluation}, journal = {Arabian Journal of Chemistry}, volume = {9}, year = {2016}, month = {NOV}, pages = {S1597-S1602}, abstract = {A synthesis of (+/-)-thia-calanolide A 3 has been successfully accomplished starting from 3,5-dimethoxythiophenol 4, in six steps in an overall yield of 4.5\%. The key reaction involved Friedel-Crafts tigloylation of 5,7-dihydroxy-4-n-propyl thiocoumarin 6 employing an appropriate solvent of CS2-PhNO2 in a ratio of 7:3. In its biological evaluation for anti-HIV activity, (+/-)-thia-calanolide A 3 demonstrated comparatively less activity with calanolide A and its synthetic analogue aza-calanolide. Further, (+/-)-3 has been resolved by chiral HPLC to (+) and (-)-3. (C) 2012 Production and hosting by Elsevier B.V. on behalf of King Saud University.}, doi = {10.1016/j.arabjc.2012.04.027}, author = {Chopade, Anil U. and Chopade, Manojkumar U. and Chanda, Bhanu M. and Sawaikar, Dilip D. and Sonawane, Kiran B. and Gurjar, Mukund K.} } @article { ISI:000379350100109, title = {Transfer hydrogenation of biomass-derived levulinic acid to gamma-valerolactone over supported Ni catalysts}, journal = {RSC Advances}, volume = {6}, number = {64}, year = {2016}, month = {JUN}, pages = {59753-59761}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A sustainable process of catalytic transfer hydrogenation (CTH) of levulinic acid (LA) to gamma-valerolactone (GVL) was investigated over Ni on various supports (Al2O3, ZnO, MMT and SiO2) in the presence of isopropanol (IPA) as the H-donor. Among these, the montmorillonite (MMT) supported Ni catalyst showed almost complete LA conversion (\>99\%) and selectivity (\>99\%) to GVL within 1 h. XRD and XPS results showed that the concentration of the metallic species significantly enhanced (two to four times) in the recovered sample as compared to the freshly prepared Ni/MMT. This was due to the in situ reduction of Ni2+ species present on the catalyst surface, through liberated H-2 under the reaction conditions. The strong acid strength of MMT, evidenced by NH3-TPD and py-IR, facilitated the esterification of LA as well as cyclization to GVL. The conversion-selectivity pattern was found to decrease in the IPA-water mixture while, it remained unchanged in the IPA-acetone mixture. Our catalyst could be efficiently recycled up to five times with consistent CTH activity and selectivity to GVL. The plausible mechanism of LA to GVL conversion involves the formation of a levulinate ester with IPA that favours its simultaneous hydrogenation and cyclization in a spontaneous manner to give GVL and regenerating IPA for sustainability.

}, issn = {2046-2069}, doi = {10.1039/c6ra08637c}, author = {Hengne, Amol M. and Kadu, Brijesh S. and Biradar, Narayan S. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article { ISI:000374049700040, title = {Unified approach to pyrrole-embedded aza-heterocyclic scaffolds based on the RCM/isomerization/cyclization cascade catalyzed by a Ru/B-H binary catalyst system}, journal = {RSC Advances}, volume = {6}, number = {41}, year = {2016}, month = {MAR}, pages = {34428-34433}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

An easy and straightforward preparation of pyrrole-embedded aza-heterocyclic scaffolds employing a Ru/B-H binary catalyst system has been developed. The strategy generates a diverse array of privileged scaffolds from 2-aminophenyl group appended pyrroles that can be prepared by a two-step process from corresponding aminoaryl-substituted pyrroles. The technique of incorporating 2-aminoaromatic groups in the heterocycles and their subsequent ring-closing-metathesis (RCM) isomerization followed by subsequent Pictet-Spengler type reaction should also be applicable to other heterocycles for generating a library of multi-ring compounds in an efficient manner.

}, issn = {2046-2069}, doi = {10.1039/c6ra05646f}, author = {Inamdar, Suleman M. and Chakrabarty, Indradweep and Patil, Nitin T.} } @article {45651, title = {Urinary proteome alterations in HER2 enriched breast cancer revealed by multipronged quantitative proteomics}, journal = {Proteomics}, volume = {16}, year = {2016}, month = {SEP}, pages = {2403-2418}, type = {Article}, abstract = {

Globally, breast cancer is the second most common cancer among women. Although biomarker discoveries through various proteomic approaches of tissue and serum samples have been studied in breast cancer, urinary proteome alterations in breast cancer are least studied. Urine being a noninvasive biofluid and a significant source of proteins, it has the potential in early diagnosis of breast cancer. This study used complementary quantitative gel-based and gel-free proteomic approaches to find a panel of urinary protein markers that could discriminate HER2 enriched (HE) subtype breast cancer from the healthy controls. A total of 183 differentially expressed proteins were identified using three complementary approaches, namely 2D-DIGE, iTRAQ, and sequential window acquisition of all theoretical mass spectra. The differentially expressed proteins were subjected to various bioinformatics analyses for deciphering the biological context of these proteins using protein analysis through evolutionary relationships, database for annotation, visualization and integrated discovery, and STRING. Multivariate statistical analysis was undertaken to identify the set of most significant proteins, which could discriminate HE breast cancer from healthy controls. Immunoblotting and MRM-based validation in a separate cohort testified a panel of 21 proteins such as zinc-alpha2-glycoprotein, A2GL, retinol-binding protein 4, annexin A1, SAP3, SRC8, gelsolin, kininogen 1, CO9, clusterin, ceruloplasmin, and alpha 1-antitrypsin could be a panel of candidate markers that could discriminate HE breast cancer from healthy controls.

}, keywords = {2D-DIGE, Biomedicine, Breast cancer, HER2 enriched, SWATH, Urinary biomarkers}, issn = {1615-9853}, doi = {10.1002/pmic.201600015}, author = {Gajbhiye, Akshada and Dabhi, Raju and Taunk, Khushman and Vannuruswamy, Garikapati and RoyChoudhury, Sourav and Adhav, Ragini and Seal, Shubhendu and Mane, Anupama and Bayatigeri, Santhakumari and Santra, Manas K. and Chaudhury, Koel and Rapole, Srikanth} } @article { ISI:000374873100022, title = {Various types of separation membranes}, journal = {Current Science}, volume = {110}, number = {8}, year = {2016}, month = {APR}, pages = {1426-1438}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Membrane-based separation is a superior alternative to conventional processes in many separation problems of practical importance. For maximum effectiveness, both high selectivity and flux are desirable. This article summarizes the global efforts at designing new membrane materials, particularly carbon nanotube (CNT)-based membranes, to achieve the twin objectives mentioned above. Interest in CNT emanates from the excellent transport property of molecules through its frictionless smooth walls, with/without functionalization at the end tips. Permeation of water through graphene oxide (GO) channels, which are otherwise impermeable to solutes, has also generated considerable interest, and GO is being viewed as a promising material for separations. The performances of conducting polymers like polypyrrole, polyaniline, polythiophene-3, 4-ethylenedioxythiophene and their different composites have been studied as a function of changes in morphology and redox behaviour, and this aspect too is covered in the present article. Also, the dependence of the separation performances based on the size, charge and hydrophobic/hydrophilic properties has been discussed in detail. Advances in understanding will have an important bearing on future developments in separation science.

}, keywords = {carbon nanotube, conducting polymers, flux, graphene oxide, permeability, separation membranes}, issn = {0011-3891}, author = {Das, Debasree and Datta, Anindya and Contractor, Aliasgar Qutub} } @inbook { ISI:000375719300020, title = {What can simulations tell us about GPCRs: integrating the scales}, booktitle = {G Protein-Coupled Receptors: Signaling, Trafficking and Regulation}, series = {Methods in Cell Biology}, volume = {132}, year = {2016}, pages = {429-452}, publisher = {Elsevier Academic Press Inc.}, organization = {Elsevier Academic Press Inc.}, address = {525 B Street, Suite 1900, San Diego, CA 92101-4495 USA :}, abstract = {

The functional dynamics of G protein-coupled receptors (GPCRs) encompasses multiple spatiotemporal scales, ranging from femtoseconds to seconds and Angstroms to micrometers. Computational approaches, often in close collaboration with experimental methods, have been invaluable in unraveling GPCR structure and dynamics at these various hierarchical levels. The binding of natural and synthetic ligands to the wild-type and naturally occurring variant receptors have been analyzed by several computational methods. The activation of receptors from the inactive to the active state has been investigated by atomistic simulations and ongoing work on several receptors will help uncover general and receptor-specific mechanisms. The interaction of GPCRs with complex membranes that contain phospholipids and cholesterol have been probed by coarse-grain methods and shown to directly influence receptor association. In this chapter, we discuss computational approaches that have been successful in analyzing each scale of GPCR dynamics. An overview of these approaches will allow a more judicious choice of the appropriate method. We hope that an appreciation of the power of current computational approaches will encourage more critical collaborations. A comprehensive integration of the different approaches over the entire spatiotemporal scales promises to unravel new facets of GPCR function.

}, isbn = {978-0-12-803612-9; 978-0-12-803595-5}, issn = {0091-679X}, doi = {10.1016/bs.mcb.2015.11.007}, author = {Sengupta, Durba and Joshi, Manali and Athale, Chaitanya A. and Chattopadhyay, Amitabha}, editor = {Shukla, AK} } @article {42825, title = {[3+2]-Annulation of platinum-bound azomethine ylides with distal C[double bond, length as m-dash]C bonds of N-allenamides}, journal = {Chemical Communications}, volume = {53}, year = {2017}, month = {JAN}, pages = {196-199}, type = {Article}, abstract = {

A Pt-catalyzed, highly regioselective reaction between N-allenamides and imino-alkynes leading to pyrrolo[1,2-a] indoles is described. This represents the first example of [3+2]-annulation of Pt-bound azomethine ylides with the distal CQC bond of N-allenamides. The mechanism of the reaction was established by computational studies.

}, doi = {10.1039/c6cc07874e}, author = {Chakrabarty, Indradweep and Inamdar, Suleman M. and Akram, Manjur O. and Gade, Amol B. and Banerjee, Subhrashis and Bera, Saibal and Patil, Nitin T.} } @article {43716, title = { Acemetacin cocrystal structures by powder X-ray diffraction}, journal = {Iucrj}, volume = {4}, year = {2017}, month = {MAY}, pages = {206-214}, type = {Article}, abstract = {Cocrystals of acemetacin drug (ACM) with nicotinamide (NAM), p-aminobenzoic acid (PABA), valerolactam (VLM) and 2-pyridone (2HP) were prepared by melt crystallization and their X-ray crystal structures determined by high-resolution powder X-ray diffraction. The powerful technique of structure determination from powder data (SDPD) provided details of molecular packing and hydrogen bonding in pharmaceutical cocrystals of acemetacin. ACM-NAM occurs in anhydrate and hydrate forms, whereas the other structures crystallized in a single crystalline form. The carboxylic acid group of ACM forms theacid-amide dimer three-point synthon R-3(2)(9) R-2(2)(8) R-3(2)(9) with three different syn amides (VLM, 2HP and caprolactam). The conformations of the ACM molecule observed in the crystal structures differ mainly in the mutual orientation of chlorobenzene fragment and the neighboring methyl group, being anti (type I) or syn (type II). ACM hydrate, ACM-NAM, ACM-NAM-hydrate and the piperazine salt of ACM exhibit the type I conformation, whereas ACM polymorphs and other cocrystals adopt the ACM type II conformation. Hydrogen-bond interactions in all the crystal structures were quantified by calculating their molecular electrostatic potential (MEP) surfaces. Hirshfeld surface analysis of the cocrystal surfaces shows that about 50\% of the contribution is due to a combination of strong and weak O center dot center dot center dot H, N center dot center dot center dot H, Cl center dot center dot center dot H and C center dot center dot center dot H interactions. The physicochemical properties of these cocrystals are under study.}, doi = {10.1107/S2052252517002305}, author = {Bolla, Geetha and Chernyshev, Vladimir and Nangia, Ashwini} } @article {43493, title = {Acetone and methanol fruit extracts of terminalia paniculata inhibit HIV-1 infection in vitro}, journal = {Natural Product Research}, volume = {31}, year = {2017}, month = {JAN}, pages = {1468-1471}, abstract = {In this study, we report the in vitro anti-HIV1 activity of acetone and methanol extracts of fruit of Terminalia paniculata. Cytotoxicity tests were conducted on TZM-bl cells and peripheral blood mononuclear cells (PBMC), the CC50 values of both the extracts were 260g/mL. Using TZM-bl cells, the extracts were tested for their ability to inhibit replication of two primary isolates HIV-1 (X4, Subtype D) and HIV-1 (R5, Subtype C). The activity against HIV-1 primary isolate (R5, Subtype C) was confirmed using activated PBMC and by quantification of HIV-1 p24 antigen. Both the extracts showed anti-HIV1 activity in a dose-dependent manner. The EC50 values of the acetone and methanol extracts of T. paniculata were 10.3g/mL. The enzymatic assays were performed to determine the mechanism of action which indicated that the anti-HIV1 activity might be due to inhibition of reverse transcriptase (77.7\% inhibition) and protease (69.9\% inhibition) enzymes. }, doi = {10.1080/14786419.2016.1258561}, author = {Durge, Ankita and Jadaun, Pratiksha and Wadhwani, Ashish and Chinchansure, Ashish A. and Said, Madhukar and Thulasiram, H. V. and Joshi, Swati P. and Kulkarni, Smita S.} } @article {45677, title = {Anti-proliferative effect of novel primary cetyl alcohol derived sophorolipids against human cervical cancer cells HeLa}, journal = {Plos One}, volume = {12 }, year = {2017}, month = {APR}, pages = {e0174241}, type = {Article}, abstract = {Sophorolipids (SLs) are glycolipid biosurfactants that have been shown to display anticancer activity. In the present study, we report anti-proliferative studies on purified forms of novel SLs synthesized using cetyl alcohol as the substrate (referred as SLCA) and their anticancer mechanism in human cervical cancer cells. Antiproliferative effect of column purified SLCA fractions (A, B, C, D, E and F) was examined in panel of human cancer cell lines as well as primary cells. Among these fractions, SLCA B and C significantly inhibited the survival of HeLa and HCT 116 cells without affecting the viability of normal human umbilical vein endothelial cells (HUVEC). The two fractions were identified as cetyl alcohol sophorolipids with non-hydroxylated tail differing in the degree of acetylation on sophorose head group. At an IC50 concentration SLCA B (16.32 mu g ml(-1)) and SLCA C (14.14 mu g ml(-1)) blocked the cell cycle progression of HeLa cells at G1/S phase in time-dependent manner. Moreover, SLCA B and SLCA C induced apoptosis in HeLa cells through an increase in intracellular Ca2+ leading to depolarization of mitochondrial membrane potential and increase in the caspase-3, -8 and -9 activity. All these findings suggest that these SLCAs could be explored for their chemopreventive potential in cervical cancer.}, doi = {10.1371/journal.pone.0174241}, author = {Nawale, Laxman and Dubey, Parul and Chaudhari, Bhushan and Sarkar, Dhiman and Prabhune, Asmita} } @article {43546, title = {Application of unusual grignard reaction for the stereoselective synthesis of antidepressant drug (R)-(-)-venlafaxine}, journal = {Synthesis-Stuttgart}, volume = {49}, year = {2017}, month = {MAR}, pages = {1410-1418}, abstract = {An enantioselective synthesis of antidepressant drug (R)-(-)-venlafaxine is accomplished as an application of recently explored unusual Grignard reaction. An innovative method for the generation of chirality at extremely reactive benzylic center along with determination of absolute stereochemistry has been discussed. The key steps involved in the synthesis include Sharpless asymmetric dihydroxylation for the induction of chirality and an unusual Grignard reaction.}, doi = {10.1055/s-0036-1588911}, author = {Chavan, Subhash P. and Khatod, Harshali S.} } @article {45702, title = {Aromatic polyesters containing pendent 4-(phenylsulfonyl)phenyl groups: synthesis and characterization}, journal = {Journal of Polymer Research}, volume = {24}, year = {2017}, month = {MAR }, pages = {57}, type = {Article}, abstract = {

A new bisphenol, 1,1-bis-[(4-hydroxyphenyl)-1-(4-phenylsulfonyl) phenyl)] ethane (DPSBP) was synthesized starting from diphenylsulfide and was characterized by spectroscopic methods. DPSBP was polycondensed with isophthalic acid chloride (IPC), terephthalic acid chloride (TPC) and a mixture of IPC and TPC (50: 50 mol\%) by phase-transfer catalysed interfacial polymerization method to obtain aromatic polyesters containing pendent 4-(phenylsulfonyl)phenyl groups. A series of copolyesters was also obtained by polycondensation of varying molar proportions of DPSBP and bisphenol-A (BPA) with TPC. (Co) polyesters exhibited inherent viscosities in the range 0.56-1.57 dLg(-1) and number average molecular weights (Mn) were in the range 28,650-80,230 g/mol. Polyesters dissolved readily in common organic solvents such as dichloromethane, chloroform, tetrahydrofuran and aprotic polar solvents such as N-methylpyrrolidone, and N, N-dimethylacetamide. Tough, transparent and flexible films of polyesters could be cast from their chloroform solutions. X-Ray diffraction studies indicated amorphous nature of aromatic polyesters. Polyesters showed T-g values in the range 223-257 degrees C while T-10 values were in the range of 469-484 degrees C indicating their excellent thermal stability.

}, keywords = {Aromatic polyesters, Bulky pendent group, solubility, thermal stability}, issn = {1022-9760}, doi = {10.1007/s10965-017-1217-4}, author = {Bapat, Snehalata P. and Jadhav, Sushilkumar A. and Valsange, Nitin G. and Tawade, Bhausaheb V. and Honkhambe, Pandurang N. and Chavan, Nayaku N. and Wadgaonkar, Prakash P.} } @article {43949, title = {Assessing therapeutic potential of molecules: molecular property diagnostic suite for tuberculosis}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {MAY}, pages = {515-531}, type = {Article}, abstract = {

Abstract: Molecular Property Diagnostic Suite (MPDS TB) is a web tool (http://mpds.osdd.net) designed to assist the in silico drug discovery attempts towards Mycobacterium tuberculosis (Mtb). MPDS TB tool has nine modules which are classified into data library (1{\textendash}3), data processing (4{\textendash}5) and data analysis (6{\textendash}9). Module 1 is a repository of literature and related information available on the Mtb. Module 2 deals with the protein target analysis of the chosen disease area. Module 3 is the compound library consisting of 110.31 million unique molecules generated from public domain databases and custom designed search tools. Module 4 contains tools for chemical file format conversions and 2D to 3D coordinate conversions. Module 5 helps in calculating the molecular descriptors. Module 6 specifically handles QSAR model development tools using descriptors generated in the Module 5. Module 7 integrates the AutoDock Vina algorithm for docking, while module 8 provides screening filters. Module 9 provides the necessary visualization tools for both small and large molecules. The workflow-based open source web portal, MPDS TB 1.0.1 can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. Graphical Abstract: SYNOPSIS: A web-based MPDS TB Galaxy tool is developed for assessing therapeutic potential of molecules. MPDS TB is categorized into Data Library, Data Processing and Data Analysis. It can be a potential enabler for scientists engaged in drug discovery in general and in anti-TB research in particular. [Figure not available: see fulltext.] {\textcopyright} 2017, Indian Academy of Sciences.

}, keywords = {chemical analysis, Chemoinformatics, computational chemistry, Diagnosis, Drug discovery portal, Information analysis, Libraries, Molecular graphics, Molecules, Neglected diseases, Open science, Portals, tuberculosis, Web-based technology, Websites}, issn = {0974-3626}, doi = {10.1007/s12039-017-1268-4}, author = {Gaur, A. S. and Bhardwaj, A. and Sharma, A. and John, L. and Vivek, M. R. and Tripathi, N. and Bharatam, P. V. and Kumar, R. and Janardhan, S. and Mori, A. and Banerji, A. and Lynn, A. M. and Hemrom, A. J. and Passi, A. and Singh, A. and Kumar, A. and Muvva, C. and Madhuri, C. and Choudhury, C. and Kumar, D. A. and Pandit, D. and Bharti, D. R. and Kumar, D. and Singam, E. A. and Raghava, G. P. and Sailaja, H. and Jangra, H. and Raithatha, K. and Tanneeru, K. and Chaudhary, K. and Karthikeyan, M. and Prasanthi, M. and Kumar, N. and Yedukondalu, N. and Rajput, N. K. and Saranya, P. S. and Narang, P. and Dutta, Prantu and Krishnan, R.} } @article {43771, title = {Band alignment and charge transfer pathway in three phase anatase-rutile-brookite TiO2 nanotubes: an efficient photocatalyst for water splitting}, journal = {Applied Catalysis B-Environmental}, volume = {128}, year = {2017}, month = {DEC}, pages = {9-19}, type = {Journal Article}, abstract = {The study reports electrochemical synthesis, phase evolution and hydrogen generation efficiency of anatase, anatase-rutile and anatase-rutile-brookite (ARB) TiO2 nanotubes for the first time. The SEM and TEM micrographs confirm the tubular morphology of the samples. The presence of anatase, rutile and brookite phases in a single nanotube is confirmed from high resolution TEM analysis. The water splitting efficiency of the three systems are studied under one sun illumination. It is observed that the anatase-rutile-brookite TiO2 nanotubes are highly efficient compared to anatase-rutile or anatase TiO2 nanotubes. The hydrogen generated by ARB composites, after four hours of one sun illumination, is found to be nearly twice that of anatase TiO2 nanotubes and 1.6 times that of anatase-rutile TiO2 nanotubes. The results suggest that the ARB in single nanotube having two junction interfaces, highly facilitate interparticle charge transfer compared to single junction anatase-rutile or bare anatase TiO2 nanotubes. From the deconvolution of PL spectra and the synchrotron radiation assisted valence band edge analysis, the band diagram for the anatase-rutile-brookite phase is constructed. The charge separation and its transfer pathway for efficient photo-assisted water splitting are delineated. This opens a new route for the simple synthesis and study of tri-phase TiO2 for efficient photocatalytic water splitting compared to the widely studied two phase TiO2. (C) 2017 Published by Elsevier B.V.}, keywords = {Anatase-Rutile-Brookite, Hydrogen generation, nanotubes, Photocatalysis, photoluminescence, Valence band edge}, doi = {10.1016/j.apcatb.2017.06.033}, author = {Preethi, L. K. and Mathews, Tom and Nand, Mangla and Jha, S. N. and Chinnakonda, Gopinath S. and Dash, Sitaram} } @article {43904, title = {Binding selectivity of vitamin K3 based chemosensors towards nickel(II) and copper(II) metal ions}, journal = {Journal of molecular Structure}, volume = {1143}, year = {2017}, month = {SEP}, chapter = {495-514}, abstract = {

The vitamin K3 derivatives 2-methyl-3-[(pyridin-2-ylmethyl)-amino]-1,4-naphthoquinone (M-1), 2-methyl-3-[(pyridin-2-ylethyl)-amino]-1,4-naphthoquinone (M-2), 2-methyl-3-((2-(thiophen-2-yl) methyl)amino)naphthalene-1,4-dione (M-3) and 2-methyl-3-((2-(thiophen-2-yl)ethyl)amino)naphthalene-1,4-dione (M-4) have been synthesized, characterized and studied for their chemosensor abilities towards transition metal ions. Crystal structures of M-1 to M-4 revealed a variety of N-H center dot center dot O, C-H center dot center dot center dot O, C-H center dot center dot center dot pi and pi center dot center dot center dot pi interactions. Minor variations in such interactions by chemical stimuli such as metal ions, results in change in color that can be visualized by naked eyes. It has been shown that electronic structure and H-1 NMR, vibrational as well as electronic spectra from the density functional theory agree well with the experiments. The metal ion binding in ethanol, ethanol-water and in mild base triethylamine brings forth recognizing ability of M-1 toward Ni2+ whereas M-2 exhibits large sensing ability for Cu2+ ion. Interestingly M-1 display varying metal ion binding specificity in different solvents with the association constant in ethanol being 11,786 M-1 for Ni2+ compared to 9462 M-1 for the Cu2+. A reversal in preferential binding of M-2 with the respective association constants being 4190 M-1 and 6370 M-1 is discernible. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Aminonaphthoquinone Molecular-structures, Anthraquinone, Aqueous-solution, Chemosensor, Crystal-structures, Cu(II), Derivatives, DFT, Fluorometric Chemosensors, hydrogen bonding, Naphthoquinone, pi-pi stacking, Recognition, sensors}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2017.04.094}, author = {Patil, Amit and Lande, Dipali N. and Nalkar, Archana and (Gejji, Shridhar P. and Chakrovorty, Debamitra and Gonnade, Rajesh and Moniz, Tania and Rangel, Maria and Pereira, Eulalia and Salunke-Gawali, Sunita} } @article {43507, title = {Biotransformation of penicillin V to 6-aminopenicillanic acid using immobilized whole cells of E. coli expressing a highly active penicillin V acylase}, journal = {Preparative Biochemistry \& Biotechnology}, volume = {47}, year = {2017}, month = {JAN}, pages = {52-57}, abstract = {The production of 6-aminopenicillanic acid (6-APA) is a key step in the manufacture of semisynthetic antibiotics in the pharmaceutical industry. The penicillin G acylase from Escherichia coli has long been utilized for this purpose. However, the use of penicillin V acylases (PVA) presents some advantages including better stability and higher conversion rates. The industrial application of PVAs has so far been limited due to the nonavailability of suitable bacterial strains and cost issues. In this study, whole-cell immobilization of a recombinant PVA enzyme from Pectobacterium atrosepticum expressed in E. coli was performed. Membrane permeabilization with detergent was used to enhance the cell-bound PVA activity, and the cells were encapsulated in calcium alginate beads and cross-linked with glutaraldehyde. Optimization of parameters for the biotransformation by immobilized cells showed that full conversion of pen V to 6-APA could be achieved within 1 hr at pH 5.0 and 35 degrees C, till 4\% (w/v) concentration of the substrate. The beads could be stored for 28 days at 4 degrees C with minimal loss in activity and were reusable up to 10 cycles with 1-hr hardening in CaCl2 between each cycle. The high enzyme productivity of the PVA enzyme system makes a promising case for its application for 6-APA production in the industry.}, doi = {10.1080/10826068.2016.1163580}, author = {Avinash, Vellore Sunder and Chauhan, Palna Dinesh and Gaikwad, Shraddha and Pundle, Archana} } @article {43871, title = {Capillary uptake in macroporous compressible sponges}, journal = {Soft Matter}, volume = {13}, year = {2017}, month = {SEP}, chapter = { 5731-5740}, abstract = {

The capillarity-driven uptake of liquid in swellable, highly porous sponges is of significant industrial importance. Sponges prepared using polymers and their composites with carbon nanotubes and graphene have been reported, with extraordinary solvent uptake capacities and with the ability to separate oil from water. However, the effect of systematic variation of sponge characteristics on solvent uptake has not been investigated. Here, we report experiments that study capillary uptake in a variety of flexible, centimetre-sized macroporous cylindrical sponges. We used ice-templating to prepare a series of model macroporous sponges in which the porosity, modulus and composition were systematically varied. We investigated two kinds of sponge: (a) those composed purely of cross-linked polymers and (b) those prepared as composites of inorganic particles and polymers. Both kinds of sponge are flexible and exhibit elastic recovery after large compressive deformation. All sponges were characterized thoroughly with respect to their pore microstructure and elastic modulus. When one end of a sponge is plunged into a large reservoir, water rises through capillary action against gravity. We observed a transition from an inertial capillary regime, where the liquid column height rose linearly with time, t, to a viscous capillary regime, where the liquid height rose with time t(0.5). We showed that these results can be rationalized using analyses developed for rigid sponges. We combined differential momentum balance equations for uptake in rigid capillaries with the phenomenological Ergun-Forchheimer relations to account for the effect of the sponge microstructure. This approach works remarkably well in the viscous capillary regime and shows that capillary uptake is governed primarily by the total porosity and pore dimensions of soft sponges.

}, keywords = {aerogels, Building blocks, Catalyst Supports, Contact-angels, Dynamics, flow, Organic Liquids, Porous-Media, Rise}, issn = {1744-683X}, doi = {10.1039/c7sm00826k}, author = {Chatterjee, Soumyajyoti and Doshi, Pankaj and Kumaraswamy, Guruswamy} } @inbook {45783, title = {Carbene or C1 polymerization}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {117-136}, publisher = {CRC Press}, organization = {CRC Press}, chapter = {Ring-opening polymerization and metathesis polymerizations}, abstract = {

As noted in Chapter 2, metal-catalyzed polymerization of carbon-carbon double bond (C=C) containing monomers is most widely known and today we produce roughly 180 million tons of polyolefins every year. 1 In this so-called olefin polymerization or vinyl insertion polymerization method, each monomer delivers two carbon (C2) atoms in each propagation step. Insertion polymerization of monomers delivering only one carbon unit in each chain growth step is named as C1 or carbene polymerization (see Figure 3.1). 2 In the recent past, C1 polymerization techniques are being viewed as a valuable alternative to the classical C2 polymerization methods. Not only this but also C1 polymerization offer distinct advantages over C2 polymerization and thus opens up new avenues for the development of new material with polymer properties that are very difficult to achieve using traditional C2 polymerization methods. In this chapter we will discuss the significance of C1 polymerization and the different methods used for C1 polymerization, will summarize the recent developments, and will highlight the elementary steps involved in it.

}, isbn = {978-149876757-6}, issn = {978-149876758-3}, doi = {10.1201/b19905}, author = {De Bruin, B. and Chikkali, S.H.} } @article {42850, title = {Catalytic branching cascades in diversity oriented synthesis}, journal = {ChemCatChem}, volume = {9}, year = {2017}, month = {OCT}, pages = { 30-40}, type = {Article}, abstract = {

Diversity oriented synthesis (DOS) aims to generate small molecules with great structural diversity in an efficient manner. Recent years have witnessed significant achievements in the field, which help to validate the usefulness of DOS as a tool for the discovery of novel, biologically interesting small molecules. Catalytic branching cascades have emerged as a promising strategy because of their potential to transform a common type of substrate into diverse and distinct molecular frameworks. The details of the concept are presented herein.

}, doi = {10.1002/cctc.201600766}, author = {Bansode, Avinash H. and Chimala, Prathyusha and Patil, Nitin T.} } @article {43649, title = {Catalytic ozonation of clofibric acid over copper-based catalysts: in situ ATR-IR studies}, journal = {Applied Catalysis B-Environmental}, volume = {209}, year = {2017}, month = {JUL}, pages = {523-529}, abstract = {The current study describes the catalytic ozonation of clofibric acid (CFA) under ambient conditions using copper oxide catalysts synthesized by different methods. The objective of this study is to provide novel catalysts and reaction mechanism for the degradation of emerging pharmaceutical compounds in aqueous solution. Among the various Cu catalysts screened in this study, the Cut-Ali oxide catalyst showed an excellent activity and stability in the degradation and mineralization of CFA. In situ attenuated total reflection IR (ATR-IR) spectroscopy was used to examine the interaction of ozone with the active sites of the catalyst in presence of water and to investigate the possible catalytic mechanism. The presence of Lewis acid sites in the Cut-Ali catalyst increased the amount of chemisorbed water enhancing stronger interaction of ozone to form surface activated species, resulting in higher catalytic activity. The results obtained from in-situ ATR-IR study indicate that surface hydroxyl groups and Lewis acid sites are responsible for promoting the generation of hydroxyl radicals (OHS) from aqueous ozone. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.apcatb.2017.02.071}, author = {Sable, Shailesh S. and Ghute, P. P. and Fakhrnasova, D. and Mane, R. B. and Rode, Chandrashekhar V. and Medina, F. and Contreras, S.} } @inbook {43964, title = {Chapter 5: Experimental and computational approaches to study membranes and lipid-protein interactions}, booktitle = {Computational biophysics of membrane proteins}, year = {2017}, pages = {137-160}, publisher = {Royal Society of Chemistry}, organization = {Royal Society of Chemistry}, chapter = {Experimental and computational approaches to study membranes and lipid-protein interactions}, abstract = {

Biological membranes are complex two-dimensional, non-covalent assemblies of a diverse variety of lipids and proteins. A hallmark of membrane organization is varying degrees of spatiotemporal heterogeneity spanning a wide range. Membrane proteins are implicated in a wide variety of cellular functions, and comprise \~{}30\% of the human proteome and \~{}50\% of the current drug targets. Their interactions with membrane lipids are recognized as crucial elements in their function. In this article, we provide an overview of experimental and theoretical approaches to analyze membrane organization, dynamics, and lipid-protein interactions. In this context, we highlight the wide range of time scales that membrane events span, and approaches that are suitable for a given time scale. We discuss representative fluorescence-based approaches (FRET and FRAP) that help to address questions on lipid-protein and protein-cytoskeleton interactions in membranes. In a complimentary fashion, we discuss computational methods, atomistic and coarse-grain, that are required to address a given membrane problem at an appropriate scale. We believe that the synthesis of knowledge gained from experimental and computational approaches will enable us to probe membrane organization, dynamics, and interactions at increasing spatiotemporal resolution, thereby providing a robust model for the membrane in health and disease.

}, doi = {10.1039/9781782626695-00137}, author = {Sengupta, Durba and Kumar, G. Aditya and Prasanna, Xavier and Chattopadhyay, A.} } @article {43376, title = {Clickable polyurethanes based on s- triazine ring containing aromatic diisocyanate bearing pendent alkyne group: synthesis and postmodification}, journal = {Journal of Polymer Science Part A Polymer Chemistry}, volume = {55}, year = {2017}, month = {MAR}, pages = {1008-1020}, type = {Article}, abstract = {A new s-triazine ring containing aromatic diisocyanate bearing a pendent alkyne group, namely, 2,4-bis(4-isocyanatophenoxy)-6-(prop-2-yn-1-yloxy)-1,3,5-triazine was synthesized and reacted with various diols viz., 1,10-decanediol, tetraethylene glycol and polyethylene glycols in the presence of dibutyltin dilaurate as the catalyst to obtain a series of linear polyurethanes. The selected polyurethanes possessing pendent alkyne groups were postmodified with chemically diverse azides viz., 1-(azidomethyl)benzene, 1-(azidomethyl)pyrene, and methoxy end-caped poly(ethylene glycol) azide via copper-catalysed azide-alkyne Huisgen 1,3-dipolar cycloaddition. FTIR and 1H NMR spectra indicated quantitative click reaction. UV{\textendash}vis and fluorescence spectroscopic analysis confirmed complete incorporation of pyrenyl groups indicating the formation of fluorescence active polyurethane by postmodification with 1-(azidomethyl)pyrene. TG analysis of polyurethanes indicated two stage weight loss and their thermal stability, as judged by T10 values, was governed by weight percent of urethane linkages. The water contact angle measurements revealed improved wettability with increased content of PEG either in the backbone of polyurethanes or as grafted chains. DLS and TEM studies confirmed that certain polyurethanes possessing PEG segments displayed self-assembly in aqueous solution, which was further supported by pyrene encapsulation studies using UV{\textendash}vis spectroscopy. {\textcopyright} 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 1008{\textendash}1020}, keywords = {Click chemistry, Diisocynate, Polyethelene Glycol, polyurethanes, Self- Assembly}, doi = {10.1002/pola.28461}, author = {Garg, Kavita and Chatterjee, Deepshikha and Wadgaonkar, Prakash} } @article {43781, title = {Click-chemistry-based multicomponent condensation approach for design and synthesis of spirochromene-tethered 1,2,3-triazoles as potential antitubercular agents}, journal = {Research on Chemical Intermediates}, volume = {43}, year = {2017}, month = {OCT}, pages = {5675-5690}, type = {Article}, doi = {10.1007/s11164-017-2955-y}, author = {Chavan, Pramod V. and Pandit, Kapil S. and Desai, Uday V. and Wadgaonkar, Prakash P. and Nawale, Laxman and Bhansali, Sujit and Sarkar, Dhiman} } @article {45667, title = {Compositional dependence of electrical conduction in solution grown Zn1-xCrxSe thin films: a correlation}, journal = {Journal of Materials Science: Materials in Electronics}, volume = {28 }, year = {2017}, month = {MAR}, pages = {5070-5074}, type = {Article}, abstract = {Zinc selenide (ZnSe) has a typical band gap of 2.7 eV suitable for window application and can easily be synthesized using a liquid phase chemical bath deposition. An attempt is made to tune its band gap and other characteristics to cope with a maxima of the solar spectrum by deliberate addition of Cr3+. ZnSe and Zn1-xCrxSe (0 <= x <= 0.35) thin films were obtained under the controlled deposition conditions (temperature = 70 A degrees C, time = 210 min, pH = 10, etc). The compositional analysis showed Zn2+ replacement by Cr3+. The X-ray photoelectron spectroscopy revealed chemical states of the constituents Zn, Cr and Se as 2(+), 3(+) and 2(-) respectively. The electrical conductivity and thermo-power measurements in the 300-550 K temperature range showed semiconducting nature of the material and that the electrical conduction is of the n-type. The electrical conductivity is found to be increased continuously up to x = 0.05 and then decreased for further increase in x. The Hall-probe measurements also confirmed n-type conduction. The average Hall coefficient for pure ZnSe is -1.03 x 10(7) cm(3)/C whereas, it is -4.55 x 10(6) cm(3)/C for a sample with x = 0.35.}, doi = {10.1007/s10854-016-6144-3}, author = {Deshmukh, S. L. and Pingale, P. C. and Chavan, G. T. and Pawar, S. T. and Prakshale, V. M. and Kamble, S. S. and Jadkar, S. R. and Chaure, N. B. and Gopinath, C. S. and Maldar, N. N. and Deshmukh, L. P.} } @article {45744, title = {Concurrent synthesis of SnO/SnO2 nanocomposites and their enhanced photocatalytic activity}, journal = {Journal of Solid State Electrochemistry}, volume = {21}, year = {2017}, month = {JAN}, pages = {9-17}, type = {Article}, abstract = {

The SnO/SnO2 nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 A degrees C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO2 for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO2 having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO2 nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt\% confirming the conversion of SnO to SnO2 material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K-app) 0.62 x 10(-2) min(-1).

}, keywords = {Dye-degradation, Nanocomposite, Photocatalysis, tin oxide}, issn = {1432-8488}, doi = {10.1007/s10008-016-3328-y}, author = {Roy, Animesh and Arbuj, Sudhir and Waghadkar, Yogesh and Shinde, Manish and Umarji, Govind and Rane, Sunit and Patil, Kashinath and Gosavi, Suresh and Chauhan, Ratna} } @inbook {43953, title = {Conformational dynamics of intracellular tau protein revealed by cd and saxs}, booktitle = {Methods in Molecular Biology}, volume = {1523}, year = {2017}, pages = {3-20}, chapter = {Conformational dynamics of intracellular tau protein revealed by CD and SAXS}, abstract = {

A native conformation of a protein is essential for its biological role. In certain conditions, some proteins show non-native conformations, leading to aggregation, which in turn may produce severe pathologies. Such physiological conditions are classified as protein misfolding diseases. Alzheimer{\textquoteright}s disease (AD) is the most common form of dementia. Extracellular senile plaques formed by Amyloid β and intracellular aggregates formed by microtubule-associated protein Tau (MAPT) are the hallmarks of AD. Physiological role of MAPT is to maintain the integrity and stability of microtubules, however it tends to self-aggregate forming intracellular paired helical filaments (PHFs) during AD. MAPT is also subjected to various post-translational modifications such as phosphorylation, glycosylation, truncation, and acetylation. Being natively unfolded, MAPT is prone to full characterization at atomic level. Small-angle X-ray scattering (SAXS) is often applied in combination with other biophysical methods, like nuclear magnetic resonance (NMR), circular dichroism (CD), fluorescence spectroscopy, analytical ultracentrifugation (AUC), or dynamic light scattering (DLS) to characterize natively unfolded systems. Here we describe the practical aspects of MAPT characterization by SAXS and CD in detail as well as outline the inferred structural and functional implications.

}, doi = {10.1007/978-1-4939-6598-4_1}, author = {Gorantla, vijay nalini and Alexander, V. Shkumatov and Chinnathambi, Subashchandrabose} } @article {43899, title = {Copper Cobalt Sulfide Nanosheets Realizing a Promising Electrocatalytic Oxygen Evolution Reaction}, journal = {ACS Catalysis}, volume = {7}, year = {2017}, month = {SEP}, chapter = {5871-5879}, abstract = {

Nanostructured CuCo2S4, a mixed metal thiospinel, is found to be a benchmark electrocatalyst for oxygen evolution reaction (OER) in this study with a low overpotential, a low Tafel slope, a high durability, and a high turnover frequency (TOF) at lower mass loadings. Nanosheets of CuCo2S4 are realized from a hydrothermal synthesis method in which the average thickness of the sheets is found to be in the range of 815 nm. Aggregated nanosheets form a highly open hierarchical structure. When used as an electrocatalyst, CuCo2S4 nanosheets offer an overpotential value of 310 mV at a 10 mA cm(2) current density, which remains consistent for 10000 measured cycles in a 1 M KOH electrolyte. A chronoamperometric study reveals constant oxygen evolution for 12 h at a 10 mV s(-1) scan rate without any degradation of the activity. Furthermore, the calculated mass activity of the CuCo2S4 electrocatalyst is found to be 14.29 A/g and to afford a TOF value of 0.1431 s(-1) at 310 mV at a mass loading of 0.7 mg cm(-2). For comparison, nanostructures of Co3S4 and Cu0.5Co2.5S4 have been synthesized using a similar method followed for CuCo2S4. When compared to the OER activities among these three thiospinels and standard IrO2, CuCo2S4 nanosheets offered the highest OER activities at the same mass loading (0.7 mg/cm(-2)). Extensive X-ray photoelectron spectroscopy and electron paramagnetic resonance analyses for a mechanistic study reveal that introduction of Cu into the Co3S4 lattice enhances the oxygen evolution and kinetics by offering Cu2+ sites for utilitarian adsorption of OH, O, and OOH reactive species and also by offering a highly active high-spin state of octahedral Co3+ for OER catalysis.

}, keywords = {Bifunctional Electrocatalyst, Catalyst, Cuco2s4, Efficient Electrocatalyst, electrocatalyst, Electronic-structure, Nanoparticles, Nanosheet, oxide, oxygen evolution, performance, Recent Progress, Water oxidation, Water Splitting Hydrogen Evolution}, doi = { 10.1021/acscatal.7b01831}, author = {Chauhan, Meenakshi and Reddy, Kasala Prabhakar and Gopinath, Chinnakonda S. and Deka, Sasanka} } @article {45686, title = {Copper oxide supported on three-dimensional ammonia-doped porous reduced graphene oxide prepared through electrophoretic deposition for non-enzymatic glucose sensing}, journal = {Electrochimica Acta}, volume = {224}, year = {2017}, month = {JAN}, pages = {346-354}, type = {Article}, abstract = {The paper reports on the preparation of N-doped porous reduced graphene oxide/copper oxide (ammonia-doped-prGO/CuO) nanocomposite on gold electrodes using electrophoretic deposition (EPD) from an ethanolic suspension of ammonia-doped-prGO and Cu(ClO4)(2) by applying a DC voltage. The ammonia-doped-prGO/CuO nanocomposite film thickness is controlled by varying the deposition time. Morphological analysis using scanning electron microscopy (SEM) showed the formation of a 3 dimensional structure with CuO nanoparticles being homogeneously embedded in the graphene layer. Xray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman analysis revealed that the deposited copper was in its oxidized form, mainly CuO. The Au/ammonia-doped-prGO/CuO electrode was successfully applied for non-enzymatic amperometric detection of glucose. Under optimized conditions, the electrode exhibited a sensitivity of 1210 mu mM(-1) cm(-2) with a detection limit of 0.25 p,M (S/N =3) over a wide concentration range (0.25 mu M to 6 mM) at an applied potential of +0.50 V vs. Ag/AgCl. The electrode material displayed good stability, excellent selectivity, and accurate measurement in healthy and diabetic human serum samples. }, doi = {10.1016/j.electacta.2016.12.078}, author = {Maaoui, H. and Singh, S. K. and Teodorescu, F. and Coffinier, Y. and Barras, A. and Chtourou, R. and Kurungot, S. and Szunerits, S. and Boukherroub, R.} } @article {43909, title = {Covalent organic frameworks and organic cage structures}, journal = {CrystEngComm}, volume = {19}, year = {2017}, month = {SEP}, chapter = {4866-4867}, issn = {1466-8033}, doi = {10.1039/c7ce90115a}, author = {Banerjee, Rahul and Champness, Neil R.} } @article {45768, title = {Crystallisation-enhanced bulk hole mobility in phenothiazine-based organic semiconductors}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {APR }, pages = {46268}, type = {Article}, abstract = {

A series of three novel donor-acceptor systems based on C(3)-malononitrile-substituted phenothiazines was synthesised in good overall yields and their thermal, spectroscopic, and electrochemical properties were characterised. The compounds were prepared through a sequence of Ullmann-coupling, Vilsmeier-Haack formylation and Knoevenagel-condensation, followed by Suzuki-coupling reactions for introduction of aryl substitutents at C(7) position of the phenothiazine. The introduction of a donor unit at the C(7) position exhibited a weak impact on the optical and electrochemical characteristics of the compounds and led to amorphous films with bulk hole mobilities in the typical range reported for phenothiazines, despite the higher charge delocalisation as attested by computational studies. In contrast, highly ordered films were formed when using the C(7)-unsubstituted 3-malononitrile phenothiazine, exhibiting an outstanding mobility of 1 x 10(-3) cm(2) V-1 s(-1), the highest reported for this class of compounds. Computational conformational analysis of the new phenothizanes suggested that free rotation of the substitutents at the C(7) position suppresses the ordering of the system, thereby hampering suitable packing of the new materials needed for high charge carrier mobility.

}, issn = {2045-2322}, doi = {10.1038/srep46268}, author = {Shinde, D. B. and Salunke, Jagadish K. and Candeias, Nuno R. and Tinti, Francesca and Gazzano, Massimo and Wadgaonkar, P. P. and Priimagi, Arri and Camaioni, Nadia and Vivo, Paola} } @article {45763, title = {Cyclization mechanism of phomopsene synthase: mass spectrometry based analysis of various site-specifically labeled terpenes}, journal = {Journal of Antibiotics}, volume = {70}, year = {2017}, month = {MAY}, pages = {632-638}, type = {Article}, abstract = {

Elucidation of the cyclization mechanism catalyzed by terpene synthases is important for the rational engineering of terpene cyclases. We developed a chemoenzymatic method for the synthesis of systematically deuterium-labeled geranylgeranyl diphosphate ( GGPP), starting from site-specifically deuterium-labeled isopentenyl diphosphates (IPPs) using IPP isomerase and three prenyltransferases. We examined the cyclization mechanism of tetracyclic diterpene phomopsene with phomopsene synthase. A detailed EI-MS analysis of phomopsene labeled at various positions allowed us to propose the structures corresponding to the most intense peaks, and thus elucidate a cyclization mechanism involving double 1,2-alkyl shifts and a 1,2-hydride shift via a dolabelladien-15-yl cation. Our study demonstrated that this newly developed method is highly sensitive and provides sufficient information for a reliable assignment of the structures of fragmented ions.

}, issn = {0021-8820}, doi = {10.1038/ja.2017.27}, author = {Shinde, Sandip S. and Minami, Atsushi and Chen, Zhi and Tokiwano, Tetsuo and Toyomasu, Tomonobu and Kato, Nobuo and Sassa, Takeshi and Oikawa, Hideaki} } @article {44002, title = {Deciphering structural stability and binding mechanisms of potential antagonists with smoothened protein}, journal = {Journal of Biomolecular Structure and Dynamics}, year = {2017}, month = {SEP}, pages = {1-21}, type = {Article in Press}, abstract = {Identification of new potential inhibitors against Hedgehog pathway activator protein Smoothened (SMO) is considered to be of higher importance to improvise the future cancer therapeutics. Different SMO inhibitors/drugs (e.g. Cyclopamine, Vismodegib, Taladegib) used till date are found to be associated with several drug-related resistivity and toxicity. To explore the ability of new drug/inhibitor molecules, which can show better/similar binding and dynamic stability as compared to known inhibitors, virtual screening against SMO is performed followed by the comparative docking and molecular dynamic studies. {\textquoteleft}ZINC12368305{\textquoteright} is found to be the best molecule among the entire data-set, as it shows the highest binding affinity and stable conformations. Here, an integrative approach using Dynamic Graph Theory is introduced to gain the molecular insights of the structural integrity of these protein complexes at the residue level by analyzing the corresponding Protein Contact Networks along the Molecular Dynamics trajectories. The study further focuses to understand the detailed binding mechanisms of available inhibitor/drug molecules along with the newly predicted molecule. It is observed that a unique big cluster of low fluctuating residues at the vicinity of the drug binding pocket of the SMO in ZINC12368305-bound complex is present and driving it toward a more stable region. A close inspection on this site reveals the presence of a stable Pi{\textendash}Pi interaction between the pyrazole group-associated phenanthrene ring of ZINC12368305 and aromatic ring of Phe484 of SMO, which could be the potential factor of ZINC12368305 to create a more stable complex with SMO as compared to the other inhibitors.}, keywords = {inhibitors, Pi{\textendash}Pi Interaction, Smoothened Protein, Structural stability}, doi = {10.1080/07391102.2017.1372310}, author = {Sinha, N.}, editor = {Chowdhury, S.} } @article {43856, title = {Degradation of metaldehyde in water by nanoparticle catalysts and powdered activated carbon}, journal = {Environmental Science and Pollution Research}, volume = {24}, year = {2017}, month = {JUL}, pages = {17861-17873}, type = {Article}, abstract = {Metaldehyde, an organic pesticide widely used in the UK, has been detected in drinking water in the UK with a low concentration (< 1 mu g L-1) which is still above the European and UK standard requirements. This paper investigates the efficiency of four materials: powdered activated carbon (PAC) and carbon-doped titanium dioxide nanocatalyst with different concentrations of carbon (C-1.5, C-40, and C-80) for metaldehyde removal from aqueous solutions by adsorption and oxidation via photocatalysis. PAC was found to be the most effective material which showed almost over 90\% removal. Adsorption data were well fitted to the Langmuir isotherm model, giving a q (m) (maximum/saturation adsorption capacity) value of 32.258 mg g(-1) and a K-L (Langmuir constant) value of 2.013 L mg(-1). In terms of kinetic study, adsorption of metaldehyde by PAC fitted well with a pseudo-second-order equation, giving the adsorption rate constant k(2) value of 0.023 g mg(-1) min(-1), implying rapid adsorption. The nanocatalysts were much less effective in oxidising metaldehyde than PAC with the same metaldehyde concentration and 0.2 g L-1 loading concentration of materials under UV light; the maximum removal achieved by carbon-doped titanium dioxide (C-1.5) nanocatalyst was around 15\% for a 7.5 ppm metaldehyde solution.}, doi = {10.1007/s11356-017-9249-1}, author = {Li, Zhuojun and Kim, Jong Kyu and Chaudhari, Vrushali and Mayadevi, Suseeladevi and Campos, Luiza C.} } @article {43791, title = {On demand electrochemical release of drugs from porous reduced graphene oxide modified flexible electrodes}, journal = {Journal of Materials Chemistry B}, volume = {5}, year = {2017}, month = {AUG}, pages = {6557-6565}, type = {Article}, abstract = {Despite the advantages of an electrochemical control for drug release, only a handful of electrochemical-based release systems have been developed so far. We report herein on the development of an electrochemically activatable platform for on-demand delivery of drugs. It is based on flexible gold thin film electrodes coated with porous reduced graphene oxide (prGO) nanosheets onto which the drug of interest has been integrated beforehand. Two different drugs are investigated here: ondansetron hydrochloride (ODS), a selective 5-HT3 receptor antagonist used for preventing nausea and vomiting caused by chemotherapy and radiotherapy, and ampicillin (AMP), an antibiotic to prevent and treat a number of bacterial infections such as respiratory tract infections, urinary tract infections, and meningitis. In the case of ODS, application of a negative potential bias of -0.8 V results in a sustained slow ODS release with an ODS flux of 47 mu g cm(-2) h(-1). In the case of AMP, we show that polyethyleneimine modified prGO (prGO/PEI) is an extremely efficient matrix. Upon the application of +0.8 V, 24\% of AMP could be released from the electrical interface in a time span of 2 h. The released AMP kept its antibacterial activity as demonstrated by antimicrobial tests. These examples illustrate the major benefits of the developed approach for biomedical applications.}, doi = {10.1039/c7tb00687j}, author = {Boulahneche, Samia and Jijie, Roxana and Barras, Alexandre and Chekin, Fereshteh and Singh, Santosh K. and Bouckaert, Julie and Medjram, Mohamed Salah and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {44088, title = {Dendrimeric amide- and carbamate-linked lysine-based efficient molecular transporters}, journal = {Organic \& Biomolecular Chemistry}, volume = {15}, year = {2017}, month = {DEC}, pages = {9579-9584}, type = {Article}, abstract = {

Amide- and carbamate-linked dendrimeric oligomers are reported as molecular transporters. They effectively complex with pDNA and transport it into cells at an efficiency superior to Lipofectamine, when complexation is carried out by incubation overnight. The carbamate-linked K2C is superior to amide-linked K2A; their pDNA complexes have very low associated cytotoxicity.

}, doi = {10.1039/c7ob02552a}, author = {Yadav, Amit Kumar and Dey, Namit and Chattopadhyay, Sabyasachi and Ganguli, Munia and Fernandes, Moneesha} } @article {44024, title = {Docetaxel-titanate nanotubes enhance radiosensitivity in an androgen-independent prostate cancer model}, journal = {International Journal of Nanomedicine}, volume = {12}, year = {2017}, month = {AUG}, pages = { 6357-6364}, type = {Journal Article}, abstract = {Around 40\% of high-risk prostate cancer patients who undergo radiotherapy (RT) will experience biochemical failure. Chemotherapy, such as docetaxel (DTX), can enhance the efficacy of RT. Multidrug resistance mechanisms often limit drug efficacy by decreasing intracellular concentrations of drugs in tumor cells. It is, therefore, of interest to develop nanocarriers of DTX to maintain the drug inside cancer cells and thus improve treatment efficacy. The purpose of this study was to investigate the use of titanate nanotubes (TiONts) to develop a TiONts-DTX nanocarrier and to evaluate its radiosensitizing in vivo efficacy in a prostate cancer model. In vitro cytotoxic activity of TiONts-DTX was evaluated using an MTS assay. The biodistribution of TiONts-DTX was analyzed in vivo by single-photon emission computed tomography. The benefit of TiONts-DTX associated with RT was evaluated in vivo. Eight groups with seven mice in each were used to evaluate the efficacy of the nanohybrid combined with RT: control with buffer IT injection {\textpm} RT, free DXL {\textpm} RT, TiONts {\textpm} RT and TiONts-DXL {\textpm} RT. Mouse behavior, health status and tumor volume were monitored twice a week until the tumor volume reached a maximum of 2,000 mm3. More than 70\% of nanohybrids were localized inside the tumor 96 h after administration. Tumor growth was significantly slowed by TiONts-DTX associated with RT, compared with free DTX in the same conditions (P=0.013). These results suggest that TiONts-DTX improved RT efficacy and might enhance local control in high-risk localized prostate cancer.}, keywords = {Docetaxel Nanocarrier, nanoparticle, Prostate Cancer, Radiosensitivity, Titanate nanotubes}, doi = {10.2147/IJN.S139167}, author = {Mirjolet, C. and Martin, E. and Boudon, J. and Loiseau, A. and Chevrier, S. and Boidot, R. and Oudot, A. and Collin, B. and Joy, P. A. and Millot, N. and Cr{\'e}hange, G.} } @article {43994, title = {Drying of almonds I: single particle}, journal = {Indian Chemical Engineer}, year = {2017}, month = {JUN}, chapter = {1-23}, abstract = {

Drying is an essential unit operation required in food processing industries, particularly in the dry fruits industry. Drying of almonds exhibit many characteristic features such as non-spherical shape, swelling/ shrinkage as a function of moisture content, uneven drying because of their peculiar shape and proximity to other almond kernels and so on. In this study, we have investigated the drying of almonds through experiments and computational modelling. In this regard, Mettler Toledo Halogen moisture analyzer unit was used to conduct experiments for a single almond kernel. In this widely used equipment, internal air flow patterns and therefore heat and mass transfer depend on natural circulation of air. A detailed three-dimensional computational fluid dynamics (CFD) model was used to simulate the air flow pattern, heat and mass transfer in the drying unit. Carefully designed experiments with a single almond kernel were carried out at different temperatures to estimate key parameters of interest (drying kinetics and effective diffusivity). The CFD model was also used to quantify non-uniform heat and mass transfer and therefore non-uniform drying of a single almond kernel. The presented approach, models and results might be useful to improve the performance of drying units in industrial systems. The results and models presented here will also provide a basis for further work on multiple almond kernels and on tray dryer unit. {\textcopyright} 2017 Indian Institute of Chemical Engineers

}, issn = {0019-4506}, doi = {10.1080/00194506.2017.1333464}, author = {Chilka, A. G. and Ranade, V. V.} } @article {44026, title = {Drying of almonds II: multiple particles}, journal = {Indian Chemical Engineer}, year = {2017}, month = {AUG}, pages = {1-18}, type = {Journal Article}, abstract = {

Computational modelling is an efficient and effective tool for modelling the drying process for food products. Developing validated computational models for drying processes is essential to build energy-efficient drying units, producing uniform quality of dried products. This work presents drying behaviour of almonds with a specific focus on understanding interaction among multiple almonds. Eight (2 {\texttimes} 2 {\texttimes} 2) particles and twenty seven (3 {\texttimes} 3 {\texttimes} 3) particles arranged in the shape of a cuboid were used to conduct drying experiments in a Mettler Toledo Moisture Analyzer unit. Experiments were conducted to measure the moisture loss data with respect to drying time using almond kernels. Experimental data were used to understand drying kinetics as well as variation in moisture content with respect to their positions in a cuboid. Computational fluid dynamics based simulations were carried out for the flow, heat transfer and drying of particles in the unit. Actual geometry of individual particles was considered in simulations to predict the variation in velocity, heat and mass transfer coefficients for all the particles. Simulations predicted moisture loss data that matches well with the experimentally measured values. Average moisture for each layer was also compared for various intermediate drying times. Simulation results captured the overall drying process for multiple particles system adequately. The results are compared with the results obtained with drying of a single almond. The approach, models and presented results will be useful for designing large-scale drying units for almonds. {\textcopyright} 2017 Indian Institute of Chemical Engineers

}, keywords = {Almonds, CFD, Drying}, doi = {10.1080/00194506.2017.1363672}, author = {Chilka, A. G.}, editor = {Ranade, V. V.} } @article {45669, title = {Effect of postharvest ethylene treatment on sugar content, glycosidase activity and its gene expression in mango fruit}, journal = {Journal of the Science of Food and Agriculture}, volume = {97 }, year = {2017}, month = {MAR}, pages = {1630-1639}, type = {Article}, abstract = {

BACKGROUND: Ripening-associated softening is one of the important attributes that largely determines the shelf-life of mango (Mangifera indica Linn.) fruits. To reveal the effect of pre-climacteric ethylene treatment on ripening-related softening of Alphonso mango, ethylene treatment was given to mature, raw Alphonso fruits. Changes in the pool of reducing and non-reducing sugars, enzymatic activity of three glycosidases: ss-D-galactosidase, alpha-D-mannosidase and ss-D-glucosidase and their relative transcript abundance were analysed for control and ethylene treated fruits during ripening. RESULTS: Early activity of all the three glycosidases and accelerated accumulation of reducing and non-reducing sugars on ethylene treatment was evident. ss-D-Galactosidase showed the highest activity among three glycosidases in control fruits and marked increase in activity upon ethylene treatment. This was confirmed by the histochemical assay of its activity in control and ethylene treated ripe fruits. Relative transcript abundance revealed high transcript levels of ss-D-galactosidase in control fruits. Ethylene-treated fruits showed early and remarkable increase in the ss-D-galactosidase transcriptswhile alpha-D-mannosidase transcript variants displayed early accumulation. CONCLUSION: Thefindings suggest reduction in the shelf-life of Alphonso mango upon pre-climacteric ethylene treatment, a significant role of ss-D-galactosidase and alpha-D-mannosidase in the ripening related softening of Alphonso fruits and transcriptional regulation of their expression by ethylene. (C) 2016 Society of Chemical Industry

}, doi = {10.1002/jsfa.7912}, author = {Chidley, Hemangi G. and Deshpande, Ashish B. and Oak, Pranjali S. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article {45697, title = {Effect of reduction protocol of Pd catalysts on product distribution in furfural hydrogenation}, journal = {ChemistrySelect}, volume = {2}, year = {2017}, month = {JAN}, pages = {24-32}, type = {Article}, abstract = {Single step conversion of furfural to ring hydrogenation and decarbonylation products, 2-methyltetrahydrofuran (2-MeTHF) and tetrahydrofuran (THF) in high selectivity was achieved by controlling the particle size of Pd/C catalyst. The particle size variation of Pd/C catalysts in the range of 3.8 to 22 nm could be achieved by employing different reducing agents. Of particular interest was the NaBH4 reduced catalyst (Pd-B/C), which gave the lowest crystallite size of 4.8 nm due to incorporation of B into the inner lattices of Pd-Pd. This phase was evidenced by a characteristic XRD peak of Pd-B at 2q=38.85 degrees as well as a shift of (111) peak (40.07 degrees) of Pd towards the lower value (39.8 degrees). As compared to formaldehyde reduced catalyst (Pd-F/C), Pd-B/C catalyst completely suppressed the formation of furfuryl alcohol to give > 65\% selectivity to 2-MeTHF and THF. At 180 degrees C, almost equal distribution of side chain hydrogenation and ring opening products, 2-MF (45\%) and PeDO (37 \%), respectively, was observed while, higher temperature clearly favoured ring hydrogenation and decarbonylation reactions to give 2-MeTHF and THF.}, doi = {10.1002/slct.201601790}, author = {Date, N. S. and Biradar, N. S. and Chikate, R. C. and Rode, C. V.} } @article {43779, title = {Effect of shape of protrusions and roughness on the hydrophilicity of a surface}, journal = {Chemical Physics Letters}, volume = {658}, year = {2017}, month = {OCT}, pages = {34-39}, type = {Article}, abstract = {We have investigated wetting of model rough surfaces made up of hydrophilic triangular and hexagonal pillars (protrusions). The surface roughnesses are altered by varying the area of the rough surface, the height of the pillars, and the surface interactions to the water. We have established a correlation between structure i.e., the shape of a pillar, which actually depends on the number of edges (due to shape), and the wetting phenomena. We have found that surface with higher number of edges repels water at lower roughness value. We explain the correlation by analyzing the variation of interactions energy components and density profiles of water on the structured surfaces. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cplett.2017.07.015}, author = {Chowdhury, Sheelan Sengupta and Pandey, Prithvi Raj and Kumar, Rajnish and Roy, Sudip} } @article {43518, title = {Effect of side-chain functionality on the organic field-effect transistor performance of oligo(p-phenylenevinylene) derivatives}, journal = {Journal of Applied Polymer Science}, volume = {134}, year = {2017}, month = {JUN}, abstract = {In order to observe the effects of the substitution of electronegative flourine with aromatic groups in oligo(p-phenylenevinylene) compounds on their packing, morphology, and charge carrier mobility, we have synthesized napthol-substituted oligo(p-phenylenevinylene) compounds and examined their solubility, redox properties, thin film morphologies, and charge carrier properties. To date, very few examples of conjugated oligomers bearing napthol side groups have been reported in the literature. After annealing at 150 degrees C, the mobility of S1, S2, and S3 was 4.0x10(-2) cm(2) V-1 s(-1), 1.2x10(-2) cm(2) V-1 s(-1), and 2.6x10(-3) cm(2) V-1 s(-1), respectively. (c) 2017 Wiley Periodicals, Inc.}, doi = {10.1002/app.44825}, author = {Chini, Mrinmoy Kumar and Chatterjee, Shyambo} } @article {43539, title = {Efficient Sn(II)-catalyzed one-pot synthesis of a 3-substituted azetidine-2,4-dione framework}, journal = {Organic \& Biomolecular Chemistry}, volume = {15}, year = {2017}, month = {MAR}, pages = {2385-2391}, abstract = {A novel Sn(II)-catalyzed tandem cyclization reaction of aromatic aldehydes with ethyl cyanoacetate has been achieved to afford a series of 3-substituted azetidine-2,4-diones in good to excellent yields. This protocol provides straightforward access to construct the azetidine core through sequential Knoevenagel condensation, hydration and the C-N cyclization reaction.}, doi = {10.1039/c7ob00294g}, author = {Chavan, Santosh S. and Supekar, Mrudul V. and Burate, Pralhad A. and Rupanwar, Bapurao D. and Shelke, Anil M. and Suryavanshi, Gurunath} } @article {43505, title = {Efficient trifluoromethylation of C(sp(2))-H functionalized alpha-oxoketene dithioacetals: a route to the regioselective synthesis of functionalized trifluoromethylated pyrazoles}, journal = {RSC Advances}, volume = {7}, year = {2017}, month = {JAN}, pages = {10150-10153}, abstract = {An operationally simple approach for the regioselective construction of diversely substituted trifluoromethylated pyrazoles via nucleophilic trifluoromethylation of iodo-substituted alpha-oxoketene dithioacetals is described. X-ray crystallographic studies confirmed the trifluoromethylation as well as formation of a regioselective cyclized product. Furthermore, trifluoromethylated pyrazoles bearing thiomethyl groups may allow further functionalization and are of considerable interest in medicinal chemistry.}, doi = {10.1039/c7ra01130j}, author = {Sharma, N. and Kumari, N. and Chundawat, T. S. and Kumar, S. and Bhagat, S.} } @article {43462, title = {Elastic compressible energy storage devices from ice templated polymer gels treated with polyphenols}, journal = {Journal of Physical Chemistry C}, volume = {121}, year = {2017}, month = {FEB}, pages = {3270-3278}, abstract = {Design and fabrication of rechargeable energy storage devices that are robust to mechanical deformation is essential for wearable electronics. We report the preparation of compressible supercapacitors that retain their specific capacitance after large compression and that recover elastically after at least a hundred compression expansion cycles. Compressible supercapacitors are prepared using a facile, scalable method that readily yields centimeter-scale macroporous objects. We ice template a solution of polyethylenimine in green tea extract to prepare a macroporous cross-linked polymer gel (PG) whose walls are impregnated with green tea derived polyphenols. As the PG is insulating, we impart conductivity by deposition of gold on it. Gold deposition is done in two steps: first, silver nanoparticles are formed on the PG walls by in situ reduction by polyphenols and then gold films are deposited on these walls. Gold coated PGs (GPGs) were used as electrodes to deposit poly(3,4-ethylenedioxythiophene) as a pseudocapacitive material. The specific capacitance of PEDOT coated GPGs (PGPG) was found to be 253 F/g at 1 A/g. PGPG could be compressed and expanded over a hundred cycles without any suffering mechanical failure or loss of capacitative performance. The capacitance was found to be 243 F/g upon compressing the device to 25\% of its original size (viz. compressive strain = 75\%). Thus, even large compression does not affect the device performance. This device shows power and energy densities of 2715 W/kg and 22 Wh/kg, respectively, in the uncompressed state. The macroporous nature of PGPG makes it possible to fill the PGPG pores with gel electrolyte. We report that the gel electrolyte filled supercapacitor exhibited a specific capacitance of 200 F/g, which increased by 4\% upon 75\% compression.}, doi = {10.1021/acs.jpcc.6b12822}, author = {Das, Chayanika and Chatterjee, Soumyajyoti and Kumaraswamy, Guruswamy and Krishnarnoorthy, Kothandam} } @article {43549, title = {Electrochemical formation of Fe-V (O) and mechanism of its reaction with water during O-O bond formation}, journal = {Chemistry-A European Journal}, volume = {23 }, year = {2017}, month = {MAR}, pages = {3414-3424}, type = {Journal Article}, abstract = {A detailed electrochemical investigation of a series of iron complexes (biuret-modified tetraamido iron macrocycles FeIII-bTAML), including the first electrochemical generation of Fe-V(O), and demonstration of their efficacy as homogeneous catalysts for electrochemical water oxidation (WO) in aqueous medium are reported. Spectroelectrochemical and mass spectral studies indicated FeV(O) as the active oxidant, formed due to two redox transitions, which were assigned as Fe-IV(O)/Fe-III(OH2)and Fe-V(O)/Fe-IV(O). The spectral properties of both of these high-valent iron oxo species perfectly match those of their chemically synthesised versions, which were thoroughly characterised by several spectroscopic techniques. The O-O bond-formation step occurs by nucleophilic attack of H2O on FeV(O). A kinetic isotope effect of 3.2 indicates an atom-proton transfer (APT) mechanism. The reaction of chemically synthesised Fe-V(O) in CH3CN and water was directly probed by electrochemistry and was found to be first-order in water. The pK(a) value of the buffer base plays a critical role in the rate-determining step by increasing the reaction rate several-fold. The electronic effect on redox potential, WO rates, and onset overpotential was studied by employing a series of iron complexes. The catalytic activity was enhanced by the presence of electron-withdrawing groups on the bTAML framework. Changing the substituents from OMe to NO2 resulted in an eightfold increase in reaction rate, while the overpotential increased threefold.}, doi = {10.1002/chem.201605061}, author = {Pattanayak, Santanu and Chowdhury, Debarati Roy and Garai, Bikash and Singh, Kundan K. and Paul, Amit and Dhar, Basab B. and Sen Gupta, Sayam} } @article {45720, title = {Electrostatic origin of the red solvatochromic shift of DFHBDI in RNA spinach}, journal = {Journal of Physical Chemistry B}, volume = {121}, year = {2017}, month = {MAY}, pages = {4790-4798}, type = {Article}, abstract = {

Interactions with the environment tune the spectral properties of biological chromophores, e.g., fluorescent proteins. Understanding the relative contribution of the various types of noncovalent interactions in the spectral shifts can provide rational design principles toward developing new fluorescent probes. In this work, we investigate the origin of the red shift in the absorption spectra of the difluoro hydroxybenzylidene dimethyl imidazolinone (DFHBDI) chromophore in RNA spinach as compared to the aqueous solution. We systematically decompose the effects of various components of interactions, namely, stacking, hydrogen bonding, and long-range electrostatics, in order to elucidate the relative role of these interactions in the observed spectral behavior. We find that the absorption peak of DFHBDI is red-shifted by similar to 0.35 eV in RNA relative to the aqueous solution. Earlier proposals from Huang and co-workers have implicated the stacking interactions between DFHBDI and nucleic acid bases to be the driving force behind the observed red shift. In contrast, our findings reveal that the long-range electrostatic interactions between DFHBDI and negatively charged RNA. make the most significant contribution. Moreover, we notice that the opposing electrostatic fields due to the RNA backbone and the polarized water molecules around the RNA give rise to the resultant red shift. Our results emphasize the effect of strong heterogeneity in the various environmental factors that might be competing with each other.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.7b02445}, author = {Bose, Samik and Chakrabarty, Suman and Ghosh, Debashree} } @article {44176, title = {Engineering cell surface glycans with carbohydrate enantiomers to alter bacterial binding and adhesion}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {SEP}, pages = {8865-8869}, type = {Article}, abstract = {

Chirality of carbohydrate has critical functions in many biological processes. Changes in the configuration of even one sugar molecules may cause abnormal behavior or even inhibit specific processes. Herein, we have shown bioorthogonal conjugation of mannose enantiomers on HeLa cell surfaces induced a different rate of bacterial binding and cell adhesion.

}, keywords = {Bioorthogonal reaction, Carbohydrate, E. coli, Enantiomer, Surfaces functionalization}, issn = {2365-6549}, doi = {10.1002/slct.201701875}, author = {Gade, Madhuri and Chaudhary, Preeti Madhukar and Thulasiram, Hirekodathakallu V. and Kikkeri, Raghavendra} } @article {44040, title = {Evaluating a new high-throughput twin-arginine translocase assay in bacteria for therapeutic applications}, journal = {Current Microbiology}, year = {2017}, month = {AUG}, pages = {1-15}, type = {Article in Press}, abstract = {The twin-arginine translocase (Tat) pathway is involved in the transport of folded proteins in bacteria, and has been implicated in virulence and pathogenesis. A simple but efficient assay based on the quantification of the exopolysaccharide colanic acid was developed as a new means to study Tat function. Colanic acid contains a methylpentose (l-fucose) component, and its production is directly linked to the Tat pathway through the transport of enzymes involved in polysaccharide biosynthesis. Monitoring of l-fucose levels can be applied for identification of new Tat substrates and high-throughput screening of Tat inhibitors for therapeutic applications.}, doi = { 10.1007/s00284-017-1321-z}, author = {Ghosh, D.}, editor = {Chougule, S.} } @article {44119, title = {Exploring the role of GS-GOGAT cycle in microcystin synthesis and regulation - a model based analysis}, journal = {Molecular Biosystems}, volume = {13}, year = {2017}, month = {DEC}, pages = {2603-2614}, type = {Article}, abstract = {Toxic cyanobacteria blooms populate water bodies by consuming external nutrients and releasing cyanotoxins that are detrimental for other aquatic species, producing a significant impact on the plankton ecosystem and food web. To exercise population-level control of toxin production, understanding the biochemical mechanisms that explain cyanotoxin regulation within a bacterial cell is of utmost importance. In this study, we explore the mechanistic events to investigate the dependence of toxin microcystin on external nitrogen, a known regulator of the toxin, and for the first time, propose a kinetic model that analyzes the intracellular conditions required to ensure nitrogen dependence on microcystin. We hypothesize that the GS-GOGAT cycle is manipulated by variable influx of different intracellular metabolites that can either disturb or promote the balance between the enzyme microcystin synthetase and substrate glutamate to produce variable microcystin levels. As opposed to the popular notion that nitrogen starvation increases microcystin synthesis, our analyses suggest that under certain intracellular metabolite regimes, this relationship can either be completely lost or reversed. External nitrogen can only complement the conditions fixed by intracellular glutamate, glutamine and 2-oxoglutarate. This mechanistic understanding can provide an experimentally testable hypothesis for exploring the less-known biology of microcystin synthesis and designing specific interventions.}, doi = {10.1039/c7mb00342k}, author = {Banerjee, Swarnendu and Subramanian, Abhishek and Chattopadhyay, Joydev and Sarkar, Ram Rup} } @article {44177, title = {Facile one-pot multi-component synthesis of spirooxindoles and 3, 3 {\textquoteleft}-disubstituted oxindoles via sp(3) C-H activation/functionalization of azaarenes}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {SEP}, pages = {9147-9152}, type = {Article}, abstract = {

A novel one-pot multicomponent reaction (MCR) protocol has been demonstrated for the first time for sustainable and facile synthesis of spirooxindoles and 3, 3 {\textquoteleft}-disubstituted oxindoles in an excellent yield via sp(3) C-H activation/functionalization of 2-methyl azaarenes and (2-azaaryl)methanes with isatin, active methylene compounds using eco-friendly heterogeneous, reusable silica-supported dodecatungstophosphoric acid (DTP/SiO2) catalyst.

}, keywords = {3, 3{\textquoteright}-disubstituted oxindoles, azaarenes, silica-supported dodecatungstophosphoric acid (DTP/SiO2) catalyst, sp(3) C-H activation/functionalization, spirooxindoles}, issn = {2365-6549}, doi = {10.1002/slct.201701507}, author = {Pathan, Mohsinkhan Y. and Chavan, Santosh S. and Shaikh, Taufeekaslam M. Y. and Thorat, Shridhar H. and Gonnade, Rajesh G. and Mulla, Shafeek A. R.} } @article {43487, title = {Facile one-pot synthesis of aliphatic bridged diaryloxy compounds, cyclic and crown ethers under mild conditions}, journal = {Supramolecular Chemistry}, volume = {29}, year = {2017}, month = {JAN}, pages = {462-470}, abstract = {We report here the facile, room temperature, catalyst free, one pot synthesis of aliphatic bridged diaryloxy compounds, cyclic and crown ethers. Anhydrous potassium carbonate (K2CO3) as a mild base along with dimethyl sulfoxide generates the phenoxide ion which facilitates the nucleophilic substitution of bromoalkanes to yield the corresponding crown ethers.}, doi = {10.1080/10610278.2016.1267858}, author = {Sakate, Sachin and Kamble, Sumit and Chikate, Rajiv and Rode, Chandrashekhar} } @article {44015, title = {Facile synthesis and electrochemical evaluation of PANI/CNT/MoS2 ternary composite as an electrode material for high performance supercapacitor}, journal = {Materials Science and Engineering B: Solid-State Materials for Advanced Technology}, volume = {23}, year = {2017}, month = {SEP}, pages = { 24-34}, type = {Journal Article}, abstract = {Synthesis of a novel ternary composite consisting of polyaniline (PANI), functionalized multi-walled carbon nanotubes (CNTs) and molybdenum disulfide (MoS2), via an in-situ polymerization method is reported. Detailed structural and electrochemical characterization shows that incorporation of a small amount of MoS2 in PANI/CNT composite tends to eliminate agglomeration problem of CNT. The PANI/CNT/MoS2 ternary composite reaches a specific capacitance of 350 F/g at the current density 1 A/g corresponding to a 5\% MoS2 content. This ternary composite shows good cycling stability even at a higher energy density of 10 A/g. Further, PANI/CNT/MoS2 composite electrode shows higher energy density (7.77 Wh/kg) and power density (2140 W/kg) as compared to PANI/CNT composite without MoS2.}, keywords = {MoS2, polyaniline, supercapacitor, Ternary Composite}, doi = {10.1016/j.mseb.2017.05.001}, author = {Thakur, A.K. and Deshmukh, A. B. and Choudhary, R. B. and Karbhal, I. and Majumder, M. and Shelke, M.V.} } @article {44110, title = {Fire-retardant, self-extinguishing inorganic/polymer composite memory foams}, journal = {ACS Applied Materials \& Interfaces}, volume = {9}, year = {2017}, month = {DEC}, pages = {44864-44872}, type = {Article}, abstract = {Polymeric foams used in furniture and automotive and aircraft seating applications rely on the incorporation of environmentally hazardous fire-retardant additives to meet fire safety norms. This has occasioned significant interest in novel approaches to the elimination of fire-retardant additives. Foams based on polymer nano composites or based on fire-retardant coatings show compromised mechanical performance and require additional processing steps. Here, we demonstrate a one-step preparation of a fire-retardant ice-templated inorganic/polymer hybrid that does not incorporate fire-retardant additives. The hybrid foams exhibit excellent mechanical properties. They are elastic to large compressional strain, despite the high inorganic content. They also exhibit tunable mechanical recovery, including viscoelastic "memory". These hybrid foams are prepared using ice-templating that relies on a green solvent, water, porogen. Because these foams are predominantly comprised of inorganic components, they exhibit exceptional fire retardance in torch burn tests and are self-extinguishing. After being subjected to a flame, the foam retains its porous structure and does not drip or collapse. In micro-combustion calorimetry, the hybrid foams show a peak heat release rate that is only 25\% that of a commercial fire-retardant polyurethanes. Finally, we demonstrate that we can use ice-templating to prepare hybrid foams with different inorganic colloids, including cheap commercial materials. We also demonstrate that ice-templating is amenable to scale up, without loss of mechanical performance or fire-retardant properties.}, doi = {10.1021/acsami.7b16808}, author = {Chatterjee, Soumyajyoti and Shanmuganathan, Kadhiravan and Kumaraswamy, Guruswamy} } @article {45682, title = {Genomic and functional characterization of coleopteran insect-specific alpha-amylase inhibitor gene from amaranthus species}, journal = {Plant Molecular Biology}, volume = { 94 }, year = {2017}, month = {JUN}, pages = {319-332}, type = {Article}, abstract = {The smallest 32 amino acid alpha-amylase inhibitor from Amaranthus hypochondriacus (AAI) is reported. The complete gene of pre-protein (AhAI) encoding a 26 amino acid (aa) signal peptide followed by the 43 aa region and the previously identified 32 aa peptide was cloned successfully. Three cysteine residues and one disulfide bond conserved within known alpha-amylase inhibitors were present in AhAI. Identical genomic and open reading frame was found to be present in close relatives of A. hypochondriacus namely Amaranthus paniculatus, Achyranthes aspera and Celosia argentea. Interestingly, the 3{\textquoteright}UTR of AhAI varied in these species. The highest expression of AhAI was observed in A. hypochondriacus inflorescence; however, it was not detected in the seed. We hypothesized that the inhibitor expressed in leaves and inflorescence might be transported to the seeds. Sub-cellular localization studies clearly indicated the involvement of AhAI signal peptide in extracellular secretion. Full length rAhAI showed differential inhibition against alpha-amylases from human, insects, fungi and bacteria. Particularly, alpha-amylases from Helicoverpa armigera (Lepidoptera) were not inhibited by AhAI while Tribolium castaneum and Callosobruchus chinensis (Coleoptera) alpha-amylases were completely inhibited. Molecular docking of AhAI revealed tighter interactions with active site residues of T. castaneum alpha-amylase compared to C. chinensis alpha-amylase, which could be the rationale behind the disparity in their IC50. Normal growth, development and adult emergence of C. chinensis were hampered after feeding on rAhAI. Altogether, the ability of AhAI to affect the growth of C. chinensis demonstrated its potential as an efficient bio-control agent, especially against stored grain pests.}, doi = {10.1007/s11103-017-0609-5}, author = {Bhide, Amey J. and Channale, Sonal M. and Yadav, Yashpal and Bhattacharjee, Kabita and Pawar, Pankaj K. and Maheshwari, V. L. and Gupta, Vidya S. and Ramasamy, Sureshkumar and Giri, Ashok P.} } @inbook {45821, title = {Global conformation of Tau protein mapped by Raman spectroscopy}, booktitle = {Methods in Molecular Biology}, volume = {1523}, year = {2017}, pages = {21-31}, publisher = {Humana Press Inc.}, organization = {Humana Press Inc.}, chapter = {Global conformation of Tau protein mapped by Raman spectroscopy}, address = {New York}, abstract = {Alzheimer{\textquoteright}s disease (AD) is one of the neurodegenerative disease characterized by progressive neuronal loss in the brain. Its two major hallmarks are extracellular senile plaques and intracellular neurofibrillary tangles (NFTs), formed by aggregation of amyloid β-42 (Aβ-42) and Tau protein respectively. Aβ-42 is a transmembrane protein, which is produced after the sequential action of β- and γ-secretases, thus obtained peptide is released extracellularly and gets deposited on the neuron forming senile plaques. NFTs are composed of microtubule-associated protein-Tau (MAPT). Tau protein{\textquoteright}s major function is to stabilize the microtubule that provides a track on which the cargo proteins are shuttled and the stabilized microtubule also maintains shape and integrity of the neuronal cell. Tau protein is subjected to various modifications such as phosphorylation, ubiquitination, glycation, acetylation, truncation, glycosylation, deamination, and oxidation; these modifications ultimately lead to its aggregation. Phosphorylation is the major modification and is extensively studied with respect to Tau protein. Tau protein, however, undergoes certain level of phosphorylation and dephosphorylation, which regulates its affinity for microtubule and ultimately leading to microtubule assembly and disassembly. Our main aim was to study the native state of longest isoform of Tau (hTau40WT-4R2N) and its shortest isoform, (hTau23WT-3R0N), at various temperatures such as 10, 25, and 37 {\textdegree}C. Raman spectroscopic results suggested that the proportion of random coils or unordered structure depends on the temperature of the protein environment. Upon increase in the temperature from 10 to 37 {\textdegree}C, the proportion of random coils or unordered structures increased in the case of hTau40WT. However, we did not find a significant effect of temperature on the structure of hTau23WT. This current approach enables one to analyze the global conformation of soluble Tau in solution. }, doi = {10.1007/978-1-4939-6598-4_2}, author = {Gorantla, N.V. and Khandelwal, P. and Poddar, P. and Chinnathambi, S.} } @article {44154, title = {H-Bonding assisted self-assembly of anionic and neutral ligand on metal: a comprehensive strategy to mimic ditopic ligands in olefin polymerization}, journal = {Inorganic Chemistry}, volume = {56}, year = {2017}, month = {OCT}, pages = {12448-12456}, type = {Article}, abstract = {Self-assembly of two neutral ligands on a metal to mimic bidentate ligand coordination has been frequently encountered in the recent past, but self-assembly of an anionic ligand on a metal template alongside a neutral ligand remains an elusive target. Such a self-assembly is hampered by additional complexity, wherein a highly negatively charged anion can form intermolecular hydrogen bonding with the supramolecular motif, leaving no scope for self-assembly with neutral ligand. Presented here is the self-association of anionic ligand 3-ureidobenzoic acid (2a) and neutral ligand 1-(3-(diphenylphosphanyl)phenyl)urea (1a) on a metal template to yield metal complex [{COOC6H4-NH(CO)NH2}{Ph2PC6H4NH(CO)NH2}PdMeDMSO] (4a). The identity of 4a was established by NMR and mass spectroscopy. Along the same lines, 3-(3-phenylureido)benzoic acid (2b) and 1-(3-(diphenylphosphanyl)phenyl)-3-phenylurea (1b) self-assemble on a metal template to produce palladium complex [{COOC6H4NH(CO)NHPh}{Ph2PC6H4NH(CO)NHPh}PdMePy] (5c). The existence of 5c was confirmed by Job plot, 1-2D NMR spectroscopy, deuterium labeling, IR spectroscopy, UV-vis spectroscopy, model complex synthesis, and DFT calculations. These solution and gas phase investigations authenticated the presence of intramolecular hydrogen bonding between hydrogen{\textquoteright}s of 1b and carbonyl oxygen of 2b. The generality of the supramolecular approach has been validated by preparing six complexes from four monodentate ligands, and their synthetic utility was demonstrated in ethylene polymerization. Complex 4a was found to be the most active, leading to the production of highly branched polyethylene with a molecular weight of 55700 g/mol and melting temperature of 112 degrees C.}, doi = {10.1021/acs.inorgchem.7b01923}, author = {Mote, Nilesh R. and Patel, Ketan and Shinde, Dinesh R. and Gaikwad, Shahaji R. and Koshti, Vijay S. and Gonnade, Rajesh G. and Chikkali, Samir H.} } @article {43841, title = {Hidden electrostatic basis of dynamic allostery in a PDZ domain}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {114}, year = {2017}, month = {JUL}, pages = {E5825-E5834}, type = {Article}, abstract = {Allosteric effect implies ligand binding at one site leading to structural and/or dynamical changes at a distant site. PDZ domains are classic examples of dynamic allostery without conformational changes, where distal side-chain dynamics is modulated on ligand binding and the origin has been attributed to entropic effects. In this work, we unearth the energetic basis of the observed dynamic allostery in a PDZ3 domain protein using molecular dynamics simulations. We demonstrate that electrostatic interaction provides a highly sensitive yardstick to probe the allosteric modulation in contrast to the traditionally used structure-based parameters. There is a significant population shift in the hydrogen-bonded network and salt bridges involving side chains on ligand binding. The ligand creates a local energetic perturbation that propagates in the form of dominolike changes in interresidue interaction pattern. There are significant changes in the nature of specific interactions (nonpolar/polar) between interresidue contacts and accompanied side-chain reorientations that drive the major redistribution of energy. Interestingly, this internal redistribution and rewiring of side-chain interactions led to large cancellations resulting in small change in the overall enthalpy of the protein, thus making it difficult to detect experimentally. In contrast to the prevailing focus on the entropic or dynamic effects, we show that the internal redistribution and population shift in specific electrostatic interactions drive the allosteric modulation in the PDZ3 domain protein.}, doi = {10.1073/pnas.1705311114}, author = {Kumawat, Amit and Chakrabarty, Suman} } @article {43264, title = {Hybrids of thienopyrimidinones and thiouracils as anti-tubercular agents: SAR and docking studies}, journal = {European Journal of Medicinal Chemistry}, volume = {127}, year = {2017}, month = {JAN}, abstract = {

A number of hybrid molecules containing thienopyrimidinones and thiouracil moieties were designed, synthesized and tested against Mycobacterium tuberculosis H37Ra wherein it was observed that the compounds 11-1514 exhibited antitubercular activity in vitro (MIC 7.6{\textendash}19.1 μg/ml, 12{\textendash}35 μM) against dormant stage while compound 15 exhibited antitubercular activity in vitro against dormant (MIC 23.4 μg/ml, 41 μM) as well as active (MIC 25.4 μg/ml, 45 μM) stage. Structural modifications of compound 15 were carried out to study the structure-activity relationship and it was observed that compound 18 exhibited antitubercular activity comparable to compound 15. Cytotoxicity studies revealed that these molecules were non-toxic. The docking study of compound 15 showed that there was binding with the active site of mycobacterial pantothenate synthetase. Further docking studies led to the synthesis of the compounds 16 and 17 and the antitubercular activity screening results showed that these compounds have significant antitubercular activity. The compounds 15-18 (MIC 11{\textendash}29 μg/ml, 19{\textendash}51 μM) can be used as starting points for further optimization. The synthetic strategies used in the present work have potential to prepare a large number of compounds for further refinement of structures and the present results will be very useful in the development of a new class of antimycobacterial agents.

}, doi = {10.1016/j.ejmech.2017.01.009}, author = {Pisal, Mahesh M. and Nawale, Laxman U. and Patil, Manoj and Bhansali, Sujit G. and Gajbhiye, Jayant M. and Sarkar, Dhiman and Chavan, Subhash P. and Borate, Hanumant B.} } @article {44027, title = {Hydrothermally reduced nano porous graphene{\textendash}polyaniline nanofiber composites for supercapacitor}, journal = {FlatChem}, volume = {1}, year = {2017}, month = {JAN}, pages = {1-5}, type = {Article}, abstract = {Hydrothermally reduced porous graphene (PGs) and polyaniline (PANI) nanofiber composites (PGs?PANI) were prepared by interfacial polymerization of aniline in the presence of reduced porous graphene (PGs) under acidic conditions. Hydrothermal reduction of graphene oxide (GO) produced graphene quantum dots (GQDs) along with porous reduced graphene (PGs). The removal of nano sized GQDs generate several round shaped edges in the graphene, which facilitated improved charge storage. In addition to preparation of porous graphene, we developed an approach to process the PGs. We envisioned preparing conjugated polymer as processing material. The capacitive behavior of PGs was characterized using cyclic voltammetry (CV) and galvanostatic charge?discharge (GCD) techniques. The specific capacitance of hydrothermally reduced GO (PGs) and PGs?PANI composites was 185 F/g and 357 F/g at 0.1 A/g in 1 M H2SO4 electrolyte. The energy density of PGs?PANI composite was obtained 49.58 W h/kg at a power density of 71.8 W/kg.}, doi = {10.1016/j.flatc.2016.08.001}, author = {Chini, Mrinmoy Kumar and Chatterjee, Shyambo} } @article {43744, title = {Identification and synthesis of mycalol analogues with improved potency against anaplastic thyroid carcinonia cell lines}, journal = {Journal of Natural Products}, volume = {80}, year = {2017}, month = {APR}, pages = {1125-1133}, type = {Article}, abstract = {The marine metabolite mycalol (1) has a specific inhibitory activity on cells of anaplastic thyroid carcinoma (ATC), a very aggressive and rare cancer that does not have effective conventional therapy. In this study, we describe six new related analogues (2-7) that differ in the length of the terminal alkyl residue and the presence of acetate or 3S-hydroxybutyrate (3S)-3HB as a substituent at C-19. Despite the structural{\textquoteright} analogies, some of the new members were significantly more-cytotokic than 1 on cell lines,derivecl from human ATC. Structures inclusive of the 2{\textquoteright}R,3R,4S,7R,8S,19R absolute configuration were asigned to 2-7 on the basis of detailed spectroscopic analysis, synthesis of different isomers, and application of ECD and Mosher{\textquoteright}s methods. This work led to the identification of mycal61-578 (3) as the most potent analogue, with an IC50 of 2.3 mu M on FRO cells:}, doi = {10.1021/acs.jnatprod.7b00043}, author = {Cutignano, Adele and Seetharamsingh, B. and D{\textquoteright}Angelo, Daniela and Nuzzo, Genoveffa and Khairnar, Pankaj V. and Fusco, Alfredo and Reddy, D. Srinivasa and Fontana, Angelo} } @article {43925, title = {Impact of rare-earth metal oxide (Eu 2 O 3 ) on the electrochemical properties of a polypyrrole/CuO polymeric composite for supercapacitor applications}, journal = {RSC Advances}, volume = {7}, year = {2017}, month = {MAR}, pages = {20037-20048}, type = {Article}, abstract = {A ternary composite of polypyrrole/copper oxide/europium oxide (PPY/CuO/Eu2O3), synthesized via a facile in situ chemical oxidative polymerization method, exhibits the maximum specific capacitance of 320 F g$^{-}${\textonesuperior} at the current density of 1 A g$^{-}${\textonesuperior}. Incorporation of the rare-earth metal oxide Eu2O3 in the PPY/CuO matrix can promote charge transportation in the resulting ternary nanocomposite by enhancing the porosity. The interconnected mesoporous networks reduce the internal resistance and the charge transfer resistance (Rct) of the composite electrode material. Moreover, the incorporation of Eu2O3 in the PPY/CuO provides support to the fragile polymer backbone resulting in an excellent cycle stability and a markedly enhanced thermal stability. These together with the exhibition of an excellent coulombic efficiency demonstrates that incorporation of rare earth metal oxide can play a significant role in improving the performance of a polymeric composite opted as an electrode material for high-performance supercapacitor.}, doi = {10.1039/C7RA01438D}, author = {Majumder, Mandira and Choudhary, Ram Bilash and Thakur, Anukul. K. and Karbhal, Indrapal} } @article {43857, title = {Influence of preparation method on activity and stability of Ni catalysts supported on Gd doped ceria in dry reforming of methane}, journal = {Journal of CO2 Utilization}, volume = {20}, year = {2017}, month = {JUL}, pages = {357-367}, type = {Article}, abstract = {Nickel catalysts supported on Gd doped ceria (NGDC), with various Ni content, were prepared through different preparation routes and evaluated for dry reforming of methane (DRM). Their detailed characterization revealed that method of preparation plays an important role in Ni dispersion, with catalysts prepared through co-precipitation showing high Ni dispersion. The co-precipitated 12NGDC-cp catalyst with 12 wt\% NiO was found to be superior in terms of high CO2 and CH4 conversions compared to catalysts prepared through citrate gel or impregnation methods Even H-2 and CO yields are high on this catalyst, while it shows excellent durability with stable activity even after 100 h on-stream. Thermogravimetric analysis of spent catalyst showed presence of coke, with transmission electron microscopic studies pointing to the presence of Ni crystallites at the mouth of the carbon whiskers. These Ni crystallites appear to be still active for DRM reaction. Among the spent catalysts, the carbon formation was high on catalysts that have bigger Ni crystallites, with the catalysts prepared through impregnation and citrate gel methods having higher coke. Investigations also reveal that the conversion of active (amorphous) carbon into stable (graphitic) carbon depends on the Ni crystallite size, temperature and duration of the reaction. These studies demonstrate that Gd doped ceria is a good support for Ni, to obtain high DRM activity and very good on-stream stability provided the catalysts are prepared through an appropriate method.}, doi = {10.1016/j.jcou.2017.06.014}, author = {Gurav, Hanmant R. and Dama, Srikanth and Samuel, Violet and Chilukuri, Satyanarayana} } @article {43651, title = {Influence of thermocleavable functionality on organic field-effect transistor performance of small molecules}, journal = {Chemical Physics Letters}, volume = {678}, year = {2017}, month = {JUN}, pages = {139-145}, abstract = {Diketopyrrolopyrrole based donor-acceptor-donor conjugated small molecules using ethylene dioxythiophene as a donor was synthesized. Electron deficient diketopyrrolopyrrole unit was substituted with thermocleavable (tert-butyl acetate) side chains. The thermal treatment of the molecules at 160 degrees C eliminated the tert-butyl ester group results in the formation of corresponding acid. Optical and theoretical studies revealed that the molecules adopted a change in molecular arrangement after thermolysis. The conjugated small molecules possessed p-channel charge transport characteristics in organic field effect transistors. The charge carrier mobility was increased after thermolysis of tert-butyl ester group to 5.07 x 10(-5) cm(2)/Vs. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cplett.2017.04.041}, author = {Mahale, Rajashree Y. and Dharmapurikar, Satej S. and Chini, Mrinmoy Kumar and Venugopalan, Vijay} } @inbook {45809, title = {Insertion or ziegler-natta polymerization of olefins: science and technology}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {31-116}, publisher = {CRC Press}, organization = {CRC Press}, abstract = {

One of the most disruptive discoveries of twentieth century has been metal-catalyzed polymerization of ethylene to polyethylene by Prof. Karl Ziegler from the Max Plank Institut Fuer Kohlenforschung, Mulheim, Germany. This discovery marked the beginning of an era, which revolutionized the field of chemistry, in particular, the field of polymer chemistry in many aspects and saw an avalanche of patents and publications. Unlike typical academic discoveries, this invention did not stop at the academic labs, but led to the development of a large-scale process that produces about 180 million tons of polyolefins (annually) today. 1 But the very obvious question that comes to our mind is what prompted Prof. Ziegler to react ethylene with the two components (that we will discuss later in this chapter)? It was not an overnight realization, but instead, it was rational analysis of a serendipitous observation and systematic experimentation by Prof. Ziegler.

}, isbn = {978-149876758-3}, issn = {978-149876757-6}, doi = {10.1201/b19905}, author = {Chikkali, S. H. and Patel, K., and Netalkar, S.} } @article {44115, title = {Insights in the diffusion controlled interfacial flow synthesis of Au nanostructures in a microfluidic system}, journal = {Langmuir}, volume = {33}, year = {2017}, month = {DEC}, pages = {14315-14324}, type = {Article}, abstract = {Continuous segmented flow interfacial synthesis of Au nanostructures is demonstrated in a microchannel reactor. This study brings new insights into the growth of nanostructures at continuous interfaces. The size as well as the shape of the nanostructures showed significant dependence on the reactant concentrations, reaction time, temperature, and surface tension, which actually controlled the interfacial mass transfer. The microchannel reactor assisted in achieving a high interfacial area, as well as uniformity in mass transfer effects. Hexagonal nanostructures were seen to be formed in synthesis times as short as 10 min. The wettability of the channel showed significant effect on the particle size as well as the actual shape. The hydrophobic channel yielded hexagonal structures of relatively smaller size than the hydrophilic microchannel, which yielded sharp hexagonal bipyramidal particles (diagonal distance of 30 nm). The evolution of particle size and shape for the case of hydrophilic microchannel is also shown as a function of the residence time. The interfacial synthesis approach based on a stable segmented flow promoted an excellent control on the reaction extent, reduction in axial dispersion as well as the particle size distribution.}, doi = {10.1021/acs.langmuir.7b03277}, author = {Kulkarni, Amol A. and Cabeza, Victor Sebastian} } @inbook {45812, title = {Interaction of membrane cholesterol with GPCRs: implications in receptor oligomerization}, booktitle = {Receptors}, volume = {33}, year = {2017}, pages = {415-429}, publisher = {Humana Press Inc.}, organization = {Humana Press Inc.}, address = {New York}, abstract = {

G protein-coupled receptors (GPCRs) are the largest family of proteins involved in signal transduction across cell membranes, and represent major drug targets in all clinical areas. Oligomerization of GPCRs and its implications in drug discovery constitute an exciting area in contemporary biology. In this review, we have highlighted the role of membrane cholesterol and the actin cytoskeleton in GPCR oligomerization, using a combined approach of homo-FRET and coarse-grain molecular dynamics simulations. In the process, we have highlighted experimental and computational methods that have been successful in analyzing different facets of GPCR association. Analysis of photobleaching homo-FRET data provided novel information about the presence of receptor oligomers under varying conditions. Molecular dynamics simulations have helped to pinpoint transmembrane helices that are involved in forming the receptor dimer interface, and this appears to be dependent on membrane cholesterol content. This gives rise to the exciting and challenging possibility of age and tissue dependence of drug efficacy. We envision that GPCR oligomerization could be a game changer in future drug discovery.

}, doi = {10.1007/978-3-319-60174-8_16}, author = {Sengupta, D. and Kumar, G. A. and Chattopadhyay, A.} } @inbook {45813, title = {Introduction to organometallics}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {1-30}, publisher = {CRC Press}, organization = {CRC Press}, chapter = {Introduction to organometallics}, abstract = {

Polymers are gigantic macromolecules that are constructed by linking together a large number of smaller molecules called monomers through the process of polymerization. Polymer chemistry has evolved from a primitive, pragmatic discipline in the early 1920s to a well-established academic course today. The early efforts by Hermann Staudinger laid the foundation of rational polymer science and today it is nearly well understood as any other contemporary science. The fundamentals of chemistry and physics of polymers are detailed in many text books and we refer the reader to dedicated main stream polymer science books. 1 Nevertheless, the subject is forging ahead and is conquering new territories, and understanding of these new frontiers is equally important.

}, doi = {10.1201/b19905}, author = {Chikkali, S.H. and Netalkar, S.} } @article {44036, title = {Isobaric vapor-liquid equilibrium data for the binary systems of dimethyl carbonate with xylene isomers at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {62}, year = {2017}, month = {AUG}, pages = {2436-2442}, type = {Journal Article}, abstract = {Isobaric binary vapor-liquid equilibrium (VLE) data for dimethyl carbonate with xylene isomers (p-xylene, m-xylene, o-xylene, and ethylbenzene) were measured at the local atmospheric pressure of 93.13 kPa by using a dynamic recirculation still. The experimental VLE data were tested and found to be thermodynamically consistent by Herington and Van Ness consistency test. The experimental VLE data were correlated using the Wilson, NRTL, and UNIQUAC activity coefficient models and binary interactions parameters were estimated using a suitable objective function. The absolute mean deviation between the experimental and the model predicted values of vapor phase composition and total pressure was well within acceptable limits. No azeotrope was observed in any of the binary pairs and appeared to be easy for separation using conventional distillation method. }, keywords = {Atmospheric Pressure, binary mixture, Distillation, Xylene}, doi = {10.1021/acs.jced.7b00372}, author = {Yadav, S.S.}, editor = {Mali, N. A.} } @article {43660, title = {Isolation and characterization of 9-lipoxygenase and epoxide hydrolase 2 genes: insight into lactone biosynthesis in mango fruit (Mangifera indica L.)}, journal = {Phytochemistry}, volume = {138}, year = {2017}, month = {JUN}, pages = {65-75}, abstract = {Uniqueness and diversity of mango flavour across various cultivars are well known. Among various flavour metabolites lactones form an important class of aroma volatiles in certain mango varieties due to their ripening specific appearance and lower odour detection threshold. In spite of their biological and biochemical importance, lactone biosynthetic pathway in plants remains elusive. Present study encompasses quantitative real-time analysis of 9-lipoxygenase (Mi9LOX), epoxide hydrolase 2 (MiEH2), peroxygenase, hydroperoxide lyase and acyl-CoA-oxidase genes during various developmental and ripening stages in fruit of Alphonso, Paid and Kent cultivars with high, low and no lactone content and explains their variable lactone content. Study also covers isolation, recombinant protein characterization and transient over-expression of Mi9LOX and MiEH2 genes in mango fruits. Recombinant Mi9LOX utilized linoleic and linolenic acids, while MiEH2 utilized aromatic and fatty acid epoxides as their respective substrates depicting their role in fatty acid metabolism. Significant increase in concentration of delta-valerolactone and gamma-decalactone upon Mi9LOX over-expression and that of delta-valerolactone, gamma-hexalactone and delta-hexalactone upon MiEH2 over-expression further suggested probable involvement of these genes in lactone biosynthesis in mango. (C) 2017 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.phytochem.2017.03.002}, author = {Deshpande, Ashish B. and Chidley, Hemangi G. and Oak, Pranjali S. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article {44146, title = {Isomerizing hydroformylation of cashew nut shell liquid}, journal = {ChemCatChem}, volume = {9}, year = {2017}, month = {OCT}, pages = {3997-4004}, type = {Article}, abstract = {A small library of bisphosphorus ligands was evaluated in the rhodium-catalyzed isomerizing hydroformylation (I-HF) of cashew nut shell liquid (CNSL). The rhodium complex of 1,2-bis((di-tert-butylphosphanyl)methyl)benzene (BDTBPMB; L4) outperformed the other bisphosphite and bisphosphine ligands and unveiled a moderate selectivity of 28\% and 50\% in the I-HF of CNSL monoene and methoxy-protected monoene, respectively. The resultant aldehyde 16-(3-methoxyphenyl)hexadecanal P1 was isolated and its identity was fully established. Application of bis-phosphine ligand L4 in the I-HF of highly challenging CNSL cardanol (S3) and methoxy-protected CNSL cardanol yielded a linear selectivity of 74\%, although with reduced conversion. To demonstrate the synthetic utility of our strategy, the obtained aldehyde (derived from S3) was subjected to hydrogenation and the resultant 3-(16-hydroxyhexadecyl) phenol (P8) was isolated in 89\% isolated yield. High-pressure NMR investigation revealed selective formation of a bis-equatorial BDTBPMB-rhodium complex, which might be responsible for the excellent linear selectivity.}, doi = {10.1002/cctc.201700717}, author = {Pandey, Swechchha and Shinde, Dinesh R. and Chikkali, Samir H.} } @inbook {45814, title = {Kinetic model for extraction of betulinic acid by batch extraction from leaves of syzygium cumini (Jamun)}, booktitle = {Novel Water treatment and separation methods: simulation of chemical processew}, year = {2017}, pages = {179-190}, publisher = {Apple Academic Press}, organization = {Apple Academic Press}, chapter = {Kinetic model for extraction of betulinic acid by batch extraction from leaves of syzygium cumini (Jamun)}, abstract = {

Plants are one of the most important sources of medicines. Syzygium cumini known as {\textquotedblleft}jamun{\textquotedblright} in Hindi which is found in throughout India. The leaves are having promising therapeutic value with its various phyto constituents such as tannin, alkaloids, flavonoids, terpenoids, fatty acid, phenol, minerals, carbohydrates, and vitamins. All these phyto constituents are analyzed by qualitative analysis method. Betulinic acid is a naturally occurring pentacyclic triterpenoid compound. The medicinal application of betulinic acid is available for diabetes, cancer cell, and HIV. Betulinic acid shows more solubility for methanol. For extraction of betulinic acid, different extraction techniques like batch extraction and Soxhlet extraction techniques are used. The effect of various parameters like particle size, agitations speed, temperature, and solid loading is studied. To explain the extraction of biological material from plant sources different model equations are used which describes sorption isotherms of material. The experimental data of solid loading and temperature are best fitted by using second order Peleg{\textquoteright}s model. From this model the linearized Arrhenius equation was obtained and temperature dependency was 0.567 kJ/mol. The aim of this study is to find out the best kinetic model for extraction and experimental data shows the good agreement of betulinic acid with methanol which justifies batch extraction process.

}, doi = {10.1201/9781315225395}, author = {Admane, S. V. and Gaikwad, S. G. and Chavan, S. M.} } @article {45700, title = {Liquid crystalline supramolecular crosslinked polymer complexes of ditopic rylenebisimides and P4VP}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {55}, year = {2017}, month = {MAR}, pages = {951-959}, type = {Article}, abstract = {

Perylenebisimide and naphthalenebisimide (PBIPDP and NBI-PDP) end functionalized with pentadecyl phenol is designed as ditopic hydrogen bonding acceptors to form supramolecular crosslinked network with poly(4-vinyl pyridine) (P4VP). The pristine PBI-PDP has been grown as single crystals from DCM-MeOH (dichloromethane-methanol) mixture at room temperature, which revealed a P21 space group. Noticeably, the pentadecyl alkyl chain shields the aromatic perylene core on both sides resulting in the absence of p-p interaction in single-crystal assembly. The naphthalenebisimide derivative exhibits thermotropic liquid crystalline behavior, while both the molecules exhibits lyotropic liquid crystalline phases in tetrahydrofuran (THF), which were characterized using a combination of differential scanning calorimeter, X-ray diffraction, and polarized light microscopy. The hydrogen-bonded complex of both the rylenebisimides with P4VP preserves the mesomorphic properties in THF. The electron transport mobility measured by space charge limited current measurements reveals a two orders of magnitude increase in the charge transport in the P4VP complex compared to that of the pristine molecule. The average electron mobility obtained is mu(e, avg): 10(-3) cm(2)/Vs for P4VP-PBI compared to mu(e, avg): 10(-5) cm(2)/Vs for pristine PBI derivative. (C) 2017 Wiley Periodicals, Inc.

}, keywords = {crystal structures, ditopic rylenebisimide, hydrogen bonding, lyotropic liquid crystal, P4VP, Self-assembly, supramolecular crosslink, supramolecular structures}, issn = {0887-624X}, doi = {10.1002/pola.28449}, author = {Saibal, B. and Narayan, Rekha and Chithiravel, S. and Asha, S. K.} } @article {43876, title = {MCM-41-supported phosphotungstic acid-catalyzed cleavage of C-O bond in allyl aryl ethers}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {JUN}, pages = {4943-4949}, type = {Article}, abstract = {Removal of the protecting allyl group from allyl aryl ethers in the presence of other oxygen protecting groups was successfully achieved using a solid acid supported on the high surface area material MCM-41. The catalyst showed excellent activity in the presence of various electron withdrawing, electron donating, and oxidizable functional groups. The methodology is also very useful for the removal of protecting allyl groups of various natural products such as vanillin, isovanillin, and other oxygen functionalized aldehydes and ketones.}, doi = {10.1039/c7nj00375g}, author = {Sakate, Sachin S. and Kamble, Sumit B. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {45755, title = {Mechanism of unfolding of human prion protein}, journal = {Journal of Physical Chemistry B}, volume = {121}, year = {2017}, month = {JAN}, pages = {550-564}, type = {Article}, abstract = {Misfolding and aggregation of prion proteins are associated with several neurodegenerative diseases. Therefore, understanding the mechanism of the misfolding process is of enormous interest in the scientific community. It has been speculated and widely discussed that the native cellular prion protein (PrPC) form needs to undergo substantial unfolding to a more stable PrPC* state, which may further oligomerize into the toxic scrapie (PrPSc) form. Here, we have studied the mechanism of the unfolding of the human prion protein (huPrP) using a set of extensive well-tempered metadynamics simulations. Through multiple microsecond-long metadynamics simulations, we find several possible unfolding pathways. We show that each pathway leads to an unfolded state of lower free energy than the native state. Thus, our study may point to the signature of a PrPC*. form that corresponds to a global minimum on the conformational free-energy landscape. Moreover, we find that these global minima states do not involve an increased beta-sheet content, as was assumed to be a signature of PrPSc formation in previous simulation studies. We have further analyzed the origin of metastability of the PrPC form through free energy surfaces of the chopped helical segments to show that the helices, particularly H2 and H3 of the prion protein, have the tendency to form either a random coil or a beta-structure. Therefore, the secondary structural elements of the prion protein are only weakly stabilized by tertiary contacts and solvation forces so that relatively weak perturbations induced by temperature, pressure, pH, and so forth can lead to substantial unfolding with characteristics of intrinsically disordered proteins.}, doi = {10.1021/acs.jpcb.6b11416}, author = {Singh, R. K. and Chamachi, N. G. and Chakrabarty, S. and Mukherjee, A.} } @article {43908, title = {Modular assembly of porous organic cage crystals: isoreticular quasiracemates and ternary co-crystal}, journal = {CrystEngComm}, volume = {19}, year = {2017}, month = {SEP}, chapter = {4933-4941}, abstract = {

Small changes in molecular structure and crystallisation conditions can have a profound effect on the crystal packing of molecules. Increasing the system complexity-for example, by introducing multiple components-greatly increases the number of potential outcomes. Hence, the rational design of porous cocrystals with multiple components is challenging. Here, we report a family of isoreticular quasiracemate crystalline phases for porous organic cages, FT-RCC3-R center dot CCX-S (where X = 1, 2, or 4), that were prepared in a modular and predictable fashion. By using directional intermolecular interactions between cages, we were able to prepare a rare ternary co-crystal, (CC3-S(0.5)CC4-S-0.5)center dot(CC13-S(0.5)CC3-S(0.25)CC4-S-0.25).

}, keywords = {cocrystals, Frameworks, Gas-chromatography, Halogen Bonds, Hydrogen-bonds, Molecular Cage, Nanoparticles, Pores, porosity, Separation}, issn = {1466-8033}, doi = {10.1039/c7ce00783c}, author = {Tothadi, Srinu and Little, Marc A and Hasell, Tom and Briggs, Michael E. and Chong, Samantha Y. and Liu, Ming and Cooper, Andrew I.} } @article {43990, title = {Molecular dynamics simulation and experimental study on the growth of methane hydrate in presence of methanol and sodium chloride}, journal = {Energy Procedia}, volume = {105}, year = {2017}, month = {MAY}, pages = {5026-5033}, type = {Article}, abstract = {The plugging of processing and transportation lines by gas hydrate formation is a challenging problem for safe exploitation of oil and gas. The existence of water soluble third component (like methanol and sodium chloride) in the aqueous phase influence the gas hydrate formation thermodynamically also possibly affects the kinetics of hydrate growth. Inorganic salt and organic molecule (alcohols) at high concentration in the aqueous phase have been used as thermodynamic inhibitors to effectively prevent the hydrate formation. This study utilizes molecular dynamics as well as an experimental method to investigate the mechanism of the hydrate formation and the effect of additives. The MD simulation showed that at moderate temperature and pressure, a low concentration (1 wt \%) of methanol and NaCl enhances methane hydrate growth kinetics. Significant numbers of methanol molecules were observed inside the gas hydrate cages whereas Na$^{+}$/Cl$^{-}$ ions leach out during hydrate formation.}, doi = {10.1016/j.egypro.2017.03.1008}, author = {Choudhary, Nilesh and Kushwaha, Omkar Singh and Bhattacharjee, Gaurav and Chakrabarty, Suman and Kumar, Rajnish} } @article {45748, title = {Molecular features of bile salt hydrolases and relevance in human health}, journal = {Biochimica et Biophysica Acta - General Subjects}, volume = {1861}, year = {2017}, month = {JAN}, pages = {2981-2991}, type = {Article}, abstract = {Background: Bile salt hydrolase (BSH) enzyme is responsible for the de-conjugation of bile salts by commensal bacteria, thus playing a vital role in their colonization and survival in the mammalian intestine and determination of their probiotic potential. Further, bile deconjugation also leads to lowering of cholesterol and alterations in energy homeostasis, thus making BSH a clinically important enzyme. Scope of the review: Many recent observations have indicated that BSH may be involved in a multifaceted array of roles, directly or indirectly in the host and microbial physiology. BSH paralogues have now been found to occur in different microbes including free-living and pathogenic bacteria and Archaea. BSHs from various sources also show differential activity and substrate spectrum. Certain bacteria are known to possess multiple genes for BSH enzymes. BSHs have been reported to influence different metabolic phenomena, including bacterial pathogenesis and the maintenance of lipid and glucose homeostasis in the host. These observations necessitate an intense study into the biochemical, structural and regulatory features of BSH enzymes to better understand their role in regulating bacterial and host metabolism. Major conclusions: In this review, the available information on the characteristics of BSH enzymes have been organized in order to understand their interactions with a wide range of substrates and their myriad physiological roles, from bile resistance to signalling mechanisms. General significance: A detailed exploration of BSH architecture and regulation could provide insights into its evolution and a deeper appreciation of the multiple functions of this enzyme relevant to healthcare.}, doi = {10.1016/j.bbagen.2016.09.024}, author = {Chand, D. and Avinash, V. S. and Yadav, Y. and Pundle, A. V. and Suresh, C. G. and Ramasamy, S.} } @article {45664, title = {Molecular level control of the capacitance of two-dimensional covalent organic frameworks: role of hydrogen bonding in energy storage materials}, journal = {Chemistry of Materials}, volume = {29}, year = {2017}, month = {MAR}, pages = {2074-2080}, type = {Article}, abstract = {Two-dimensional redox-active covalent organic frameworks (COFs) are ideal materials for energy storage applications due to their high surface area, extended pi conjugated structure, tunable pore size, and adjustable functionalities. Herein, we report the synthesis and super capacitor application of two redox active COFs [TpPa-(OH)(2) and TpBD-(OH)(2)] along with the role of their redox active functional groups for the enrichment of specific capacitance. Of these COFs, TpPa-(OH)2 exhibited the highest specific capacitance of 416 F g(-1) at 0.5 A g(-1) current density in three electrode configuration while the highest specific capacitance was 214 F g(-1) at 0.2 A g(-1) current density in two electrode configuration. Superior specific capacitance was due to emergence of excellent pseudocapacitance by virtue of precise molecular level control over redox functionalities present in the COF backbone. This COF also demonstrated 66\% capacitance retention after 10 000 cycles along with 43\% accessibility of the redox-active hydroquinone (H2Q) moieties in three electrode configuration while the capacitance retention was 88\% after 10 000 cycles in two electrode configuration. Exceptionally high specific capacitance of TpPa-(OH)(2) was due to the reversible proton-coupled electron transfer (2H(+)/2(e-)) of hydroquinone/benzoquinone (H(2)Q/Q) moieties wherein H(2)Q and Qhad comparable chemical stabilities during redox cycling that originated from H-bonding, which was supported by calculated structures.}, doi = {10.1021/acs.chemmater.6b04178}, author = {Chandra, S. and Chowdhury, D.R and Addicoat, M. and Heine, T. and Paul, A. and Banerjee, R.} } @article {43872, title = {Multipronged quantitative proteomics reveals serum proteome alterations in breast cancer intrinsic subtypes}, journal = {Journal of Proteomics}, volume = {163}, year = {2017}, month = {JUN}, pages = {1-13}, type = {Article}, abstract = {Being molecularly heterogeneous, breast cancer tends to be a complicated oncological disease with high incidence rates throughout the world. The primary aim of this study was to identify the set of serum proteins with discriminatory capabilities towards the four major subtypes of breast cancer. We employed multipronged quantitative proteomic approaches like 2D-DIGE, iTRAQ and SWATH-MS and identified 307 differentially regulated proteins. Luminal A subtype consisted of 24, Luminal B subtype 38, HER2 Enriched subtype 17 and Triple negative breast cancer subtype 10 differentially regulated subtype specific proteins. These specific proteins were further subjected to bioinformatic tools which revealed the involvement in platelet degranulation, fibrinolysis, lipid metabolism, immune response, complement activation, blood coagulation, glycolysis and cancer signaling pathways in the subtypes of the breast cancer. The significant discrimination efficiency of the models generated through multivariate statistical analysis was decent to distinguish each of the four subtypes from controls. Further, some of the statistically significant differentially regulated proteins were verified and validated by immunoblotting and mass spectrometry based selected reaction monitoring (SRM) approach. Our Multipronged proteomics approaches revealed panel of serum proteins specifically altered for individual subtypes of breast cancer. The mass spectrometry data are available via ProteomeXchange with identifier PXD006441. Biological significance: Worldwide, breast cancer continues to be one of the leading causes of cancer related deaths in women and it encompasses four major molecular subtypes. As breast cancer treatment majorly depends on identification of specific subtype, it is important to diagnosis the disease at subtype level. Our results using multipronged quantitative proteomics identified 307 differentially regulated proteins in which 24 were specific for Luminal A, 38 for Luminal B, 17 for HER2 enriched and 10 proteins were specific for TN subtype. Bioinformatic analysis of these proteins revealed certain biological processes and pathways altered at subtype level and validation experiments of some of these proteins using immunoblotting and SRM assays are consistent with discovery data. This is the first comprehensive proteomic study on serum proteome alterations at subtype level which will not only help to distinguish subtype of breast cancer but also contribute to a better understanding of the molecular characteristic of breast cancer at individual subtype level. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jprot.2017.05.007}, author = {Gajbhiye, Akshada and Dabhi, Raju and Taunk, Khushman and Jagadeeshaprasad, Mashanipalya G. and RoyChoudhury, Sourav and Mane, Anupama and Bayatigeri, Santhakumari and Chaudhury, Koel and Santra, Manas K. and Rapole, Srikanth} } @article {44030, title = {Nano-heteroarchitectures of two-dimensional MoS 2 @ one-dimensional brookite TiO 2 nanorods: prominent electron emitters for displays}, journal = {ACS Omega}, volume = {2}, year = {2017}, month = {JUN}, pages = {2925-2934}, type = {Article}, abstract = {

We report comparative field electron emission (FE) studies on a large-area array of two-dimensional MoS2-coated @ one-dimensional (1D) brookite (β) TiO2 nanorods synthesized on Si substrate utilizing hot-filament metal vapor deposition technique and pulsed laser deposition method, independently. The 10 nm wide and 760 nm long 1D β-TiO2 nanorods were coated with MoS2 layers of thickness \~{}4 ({\textpm}2), 20 ({\textpm}3), and 40 ({\textpm}3) nm. The turn-on field (Eon) of 2.5 V/μm required to a draw current density of 10 μA/cm{\texttwosuperior} observed for MoS2-coated 1D β-TiO2 nanorods emitters is significantly lower than that of doped/undoped 1D TiO2 nanostructures, pristine MoS2 sheets, MoS2@SnO2, and TiO2@MoS2 heterostructure-based field emitters. The orthodoxy test confirms the viability of the field emission measurements, specifically field enhancement factor (βFE) of the MoS2@TiO2/Si emitters. The enhanced FE behavior of the MoS2@TiO2/Si emitter can be attributed to the modulation of the electronic properties due to heterostructure and interface effects, in addition to the high aspect ratio of the vertically aligned TiO2 nanorods. Furthermore, these MoS2@TiO2/Si emitters exhibit better emission stability. The results obtained herein suggest that the heteroarchitecture of MoS2@β-TiO2 nanorods holds the potential for their applications in FE-based nanoelectronic devices such as displays and electron sources. Moreover, the strategy employed here to enhance the FE behavior via rational design of heteroarchitecture structure can be further extended to improve other functionalities of various nanomaterials.

}, doi = {10.1021/acsomega.7b00345}, author = {Devan, Rupesh S. and Thakare, Vishal P. and Antad, Vivek V. and Chikate, Parameshwar R. and Khare, Ruchita T. and More, Mahendra and Dhayal, Rajendra S. and Patil, Shankar I. and Ma, Yuan-Ron and Schmidt-Mende, Lukas} } @article {44016, title = {New insight into sugarcane industry waste utilization (press mud) for cleaner biobutanol production by using c. acetobutylicum nrrl b-527}, journal = {Applied Biochemistry and Biotechnology}, year = {2017}, month = {MAY}, chapter = {1-18}, abstract = {

In the present study, press mud, a sugar industry waste, was explored for biobutanol production to strengthen agricultural economy. The fermentative production of biobutanol was investigated via series of steps, viz. characterization, drying, acid hydrolysis, detoxification, and fermentation. Press mud contains an adequate amount of cellulose (22.3\%) and hemicellulose (21.67\%) on dry basis, and hence, it can be utilized for further acetone-butanol-ethanol (ABE) production. Drying experiments were conducted in the temperature range of 60{\textendash}120 {\textdegree}C to circumvent microbial spoilage and enhance storability of press mud. Furthermore, acidic pretreatment variables, viz. sulfuric acid concentration, solid to liquid ratio, and time, were optimized using response surface methodology. The corresponding values were found to be 1.5\% (v/v), 1:5 g/mL, and 15 min, respectively. In addition, detoxification studies were also conducted using activated charcoal, which removed almost 93{\textendash}97\% phenolics and around 98\% furans, which are toxic to microorganisms during fermentation. Finally, the batch fermentation of detoxified press mud slurry (the sample dried at 100 {\textdegree}C and pretreated) using Clostridium acetobutylicum NRRL B-527 resulted in a higher butanol production of 4.43 g/L with a total ABE of 6.69 g/L. {\textcopyright} 2017 Springer Science+Business Media New York Author keywords

}, keywords = {Acetone, Acetone butanol ethanols, Acidic pre treatments, Agriculture, Biobutanol, cellulose, Clostridium acetobutylicum, Detoxification, Drying, Drying Fermentation, FermentationSpoilage, Fermentative production, Pre-treatment, Press mud, Press mud Pretreatment, Response surface methodology, Sugar industry, Sulfur determination}, issn = {0273-2289}, doi = {10.1007/s12010-017-2479-3}, author = {Nimbalkar, Pranhita R. and Khedkar, Manisha A. and Gaikwad, S. G. and Chavan, Pramod V. and Bankar, Sandip B.} } @article {43940, title = {New pyrene cored small organic molecule with a flexible alkyl spacer: a potential solution processable blue emitter with bright photoluminescence}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {OCT}, pages = {11383-11390}, type = {Article}, abstract = {A new pyrene cored small organic molecule viz. 1,3,6,8-tetrakis(4-((5-(9H-carbazol-9-yl) pentyl)oxy) phenyl)pyrene (PY-II) was designed and synthesized. The carbazole moiety with an alkyl spacer was introduced at 1, 3, 6 and 8 positions of the pyrene core to improve the charge transport properties and solution processability. PY-II exhibited excellent solubility in common organic solvents and high thermal stability up to 345 degrees C. The photoluminescence quantum yield (PLQY) of PY-II in solution was found to be 0.9 with bright blue emission near 450 nm which is just appropriate for the human eye. The solution processed non-doped OLED device fabricated using PY-II as an emissive layer afforded a pure blue emission with CIE coordinates of 0.16 and 0.16, a power efficiency of 0.17 lm W-1, a maximum current efficiency of 0.41 cd A(-1) and a maximum brightness of 202 cd m(-2).}, doi = {10.1039/c7nj01921a}, author = {Valsange, Nitin G. and Wong, F. L. and Shinde, Durgaprasad and Lee, C. S. and Roy, V. A. L. and Manzhos, Sergei and Feron, K. and Chang, Samuel and Katoh, Ryuzi and Sonar, Prashant and Wadgaonkar, Prakash P.} } @article {43947, title = {NIR light-triggered shrinkable thermoresponsive PNVCL nanoshells for cancer theranostics}, journal = {RSC Advances}, volume = {7}, year = {2017}, month = {SEP}, pages = {44026-44034}, type = {Article}, abstract = {For the localized treatment of a tumor in a more controlled fashion, several stimuli-responsive nanocarriers and minimally or non-invasive techniques like photothermal therapy (PTT) have emerged. However, PTT is limited to only treatment of small and superficial tumors due to the inability of NIR light to penetrate more and kill the core cells of large and deep-seated tumors. As a preliminary step towards addressing the problem, NIR light-triggered thermoresponsive theranostic nanoshell consisting of chitosan-grafted poly(N-vinyl caprolactam) as core and biocompatible gold as shell (Au PNVCL NS) are synthesized and well characterized by various techniques. PNVCL is polymerized from N-vinyl caprolactam using free radical polymerization method, and chitosan is grafted to raise its lower critical solution temperature (LCST) to hyperthermic temperature (\~{}43 {\textdegree}C). Surface plasmon resonant gold shell over PNVCL NPs core is assembled by ascorbic acid-driven in situ reduction. Core to shell diameter ratio is controlled to tune the peak in NIR region (750 nm). Therapeutic potential of Au PNVCL NS is determined over breast cancer cells MCF-7, while diagnostic potential is compared with the commercial contrast agent-Omnipaque.}, doi = {10.1039/C7RA07485A}, author = {Chauhan, Deepak S. and Singaravelu, Indulekha and Gottipalli, Rupesh and Reddy, B. Pradeep K. and Chikate, Tanmayee and Gupta, Ramkrishn and Jahagirdar, Dushyant N. and Prasad, Rajendra and De, Abhijit and Srivastava, Rohit} } @article {43525, title = {Nucleotide dependent switching in Rho GTPase: conformational heterogeneity and competing molecular interactions}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {APR}, pages = {Article Number: 45829}, abstract = {Ras superfamily of GTPases regulate myriad cellular processes through a conserved nucleotide (GTP/ GDP) dependent switching mechanism. Unlike Ras family of GTPases, for the Rho GTPases, there is no clear evidence for the existence of "sub-states" such as state 1 \& state 2 in the GTP bound form. To explore the nucleotide dependent conformational space of the Switch I loop and also to look for existence of state 1 like conformations in Rho GTPases, atomistic molecular dynamics and metadynamics simulations on RhoA were performed. These studies demonstrate that both the nucleotide-free state and the GDP bound "OFF" state have very similar conformations, whereas the GTP bound "ON" state has unique conformations with signatures of two intermediate states. The conformational free energy landscape for these systems suggests the presence of multiple intermediate states. Interestingly, the energetic penalty of exposing the non-polar residues in the GTP bound form is counter balanced by the favourable hydrogen bonded interactions between the gamma- phosphate group of GTP with the highly conserved Tyr34 and Thr37 residues. These competing molecular interactions lead to a tuneable energy landscape of the Switch I conformation, which can undergo significant changes based on the local environment including changes upon binding to effectors.}, doi = {10.1038/srep45829}, author = {Kumawat, Amit and Chakrabarty, Suman and Kulkarni, Kiran} } @article {43383, title = {Optimal combinations of control strategies and cost-effective analysis for visceral leishmaniasis disease transmission}, journal = {PLoS ONE}, volume = {12}, year = {2017}, month = {MAR}, abstract = {Visceral leishmaniasis (VL) is a deadly neglected tropical disease that poses a serious problem in various countries all over the world. Implementation of various intervention strategies fail in controlling the spread of this disease due to issues of parasite drug resistance and resistance of sandfly vectors to insecticide sprays. Due to this, policy makers need to develop novel strategies or resort to a combination of multiple intervention strategies to control the spread of the disease. To address this issue, we propose an extensive SIR-type model for anthroponotic visceral leishmaniasis transmission with seasonal fluctuations mod-eled in the form of periodic sandfly biting rate. Fitting the model for real data reported in South Sudan, we estimate the model parameters and compare the model predictions with known VL cases. Using optimal control theory, we study the effects of popular control strategies namely, drug-based treatment of symptomatic and PKDL-infected individuals, insecticide treated bednets and spray of insecticides on the dynamics of infected human and vector populations. We propose that the strategies remain ineffective in curbing the disease individually, as opposed to the use of optimal combinations of the mentioned strategies. Testing the model for different optimal combinations while considering periodic seasonal fluctuations, we find that the optimal combination of treatment of individuals and insecticide sprays perform well in controlling the disease for the time period of intervention introduced. Performing a cost-effective analysis we identify that the same strategy also proves to be effi-cacious and cost-effective. Finally, we suggest that our model would be helpful for policy makers to predict the best intervention strategies for specific time periods and their appropriate implementation for elimination of visceral leishmaniasis.}, doi = {10.1371/journal.pone.0172465}, author = {Biswas, Santanu and Subramanian, Abhishek and Elmojtaba, Ibrahim M. and Chattopadhyay, Joydev and Sarkar, Ram Rup} } @article {43492, title = {Oxidant mediated one-step complete conversion of multi-walled carbon nanotubes to graphene quantum dots and their bioactivity against mammalian and bacterial cells}, journal = {Journal of Materials Chemistry B}, volume = {5}, year = {2017}, month = {JAN}, pages = {785-796}, abstract = {It is essential for any antibacterial agent (for clinical applications) that it should have high and selective toxicity towards bacterial cells only, and should not affect the human cells at the concentration used. Graphene quantum dots (GQDs) have emerged as a potential candidate for biomedical applications. However, a simple, low cost, safe, easy to execute, one-step synthesis of uniform and monodispersed GQDs with selective toxicity towards bacterial cells rather than mammalian cells is difficult to achieve. Herein, we have reported a one-step, low-cost, aqueous-phase, simple approach for the complete conversion of multi-walled carbon nanotubes into water-dispersible GQDs with an average size of similar to 3 nm using sodium bismuthate (NaBiO3) as a strong oxidant. The cyclic voltammetry and X-ray photoelectron spectroscopy results indicated that the as-synthesized GQDs suspension possess almost negligible amounts of metallic impurities. The cytotoxicity studies of GQDs against mammalian NIH 3T3 (mouse embryo fibroblast cells) and HEK 293T (human embryonic kidney cells) cells showed that the as-synthesized GQDs were non-cytotoxic up to the concentration of similar to 200 mu g mL(-1). The antimicrobial study shows that the synthesized GQDs have high and selective toxicity towards bacterial cells with a minimum inhibitory concentration of similar to 256 mu g mL(-1) for E. coli and B. subtilis and similar to 512 mu g mL(-1) for P. aeruginosa and S. aureus. The scanning electron microscopy and atomic force microscopy images show extensive cell damage via the perturbation of bacterial cell walls, which was consistent with the enhancement of reactive oxygen species production by almost two times in the bacterial cells upon incubation with similar to 256 mu g mL(-1) GQDs. Our study suggested that the as-synthesized GQDs can be used as a potential candidate for clinical applications as they possess high toxicity to bacterial cells and low toxicity to mammalian cells.}, doi = {10.1039/c6tb02446g}, author = {Biswas, Anupam and Khandelwal, Puneet and Das, Raja and Salunke, Gayatri and Alam, Aftab and Ghorai, Suvankar and Chattopadhyay, Samit and Poddar, Pankaj} } @article {43796, title = {Partially bio-based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin-derived phenolic acids and aromatic dianhydrides: synthesis, characterization, and computational studies}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {55}, year = {2017}, month = {NOV}, pages = {3636-3645}, type = {Article}, abstract = {

Two new bio-based diacylhydrazide monomers, namely, 4,4-(propane-1,3-diylbis(oxy))bis(3-methoxybenzohydrazide) and 4,4-(propane-1,3-diylbis(oxy))bis(3,5-dimethoxybenzohydrazide) were synthesized starting from lignin-derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44-0.56 dLg(-1) and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N,N-dimethylacetamide solutions. Poly(amide imide)s showed 10\% weight loss in the temperature range 340-364 degrees C indicating their good thermal stability. Glass transition temperature (T-g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201-223 degrees C and 214-248 degrees C, respectively. The T-g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T-g. (c) 2017 Wiley Periodicals, Inc.

}, keywords = {Biobased Polymers, Computational studies, Glass-transaction temperature, lignin, Monomers, Plant oils, Polyimide, Reneable resources, Renewable resources, Step-growth polymers, structure-property relations, Sustanaible Polymers, Thermal night, Thermosetting resins, Vanillin}, issn = {0887-624X}, doi = {10.1002/pola.28748}, author = {Kuhire, Sachin S. and Sharma, Pragati and Chakrabarty, Suman and Wadgaonkar, Prakash P.} } @article {44031, title = {Photocatalytic degradation of pharmaceuticals pollutants using N-doped TiO 2 photocatalyst: identification of CFX degradation intermediates}, journal = {Indian Chemical Engineer}, volume = {59}, year = {2017}, month = {FEB}, type = {Article}, abstract = {The N-doped TiO2 photocatalyst was synthesized by the sol{\textendash}gel method and characterized in detail in terms of its morphology, structure and composition. The prepared N-doped TiO2 exhibited polycrystalline structure having particle sizes of around 50{\textendash}120 nm and rod-shaped geometry. The N-doped TiO2 was subsequently used for the photocatalytic degradation (PCD) of pharmaceutical micropollutants, namely ciprofloxacin HCl (CFX), naproxen (NPX) and paracetamol (PARA) and it was found that the rate of degradation of CFX and NPX is higher than that of PARA. To verify the beneficial effect of N-doped TiO2 for PCD of CFX, similar experiments were carried out using commercially available Aeroxide P-25 TiO2. It was observed that N-doped TiO2 was more efficient than Aeroxide{\textregistered} P-25 TiO2. It was also found that the PCD of CFX in the presence of N-doped TiO2 was highly efficient under the solar radiation as compared with artificial radiation. The effect of various operating parameters, such as adsorption of CFX, pH of the aqueous solution, effect of co-existing ions on PCD of CFX, was investigated using artificial radiation and optimum conditions were established. The intermediates formed during the PCD of CFX were identified using liquid chromatography tandem mass chromatography (LC-MS/MS). The presented results demonstrate that N-doped TiO2 photocatalyst shows excellent photocatalytic activity in the visible region for the degradation of pharmaceutical pollutants.}, doi = {10.1080/00194506.2016.1150794}, author = {Shetty, Rohit and Chavan, Vilas B. and Kulkarni, Prashant Shripad and Kulkarni, Bhaskar D. and Kamble, Sanjay P.} } @article {43666, title = {Photo-induced cytotoxicity and anti-metastatic activity of ruthenium(II)-polypyridyl complexes functionalized with tyrosine or tryptophan}, journal = {Dalton Transactions}, volume = {46}, year = {2017}, month = {MAY}, pages = {6634-6644}, abstract = {The synergistic effect of oxygen, light, and photosensitizer (PS) has found applications in medicine for the treatment of cancer through photodynamic therapy (PDT). Induction of apoptosis to cancerous cells will prevent tumor metastasis that spreads cancer cells to the neighboring organs/tissues. Herein, we report the two apoptotic Ru(II)-polypyridyl complexes that are functionalized with pendant amino acid moieties tyrosine (1) and tryptophan (2), respectively. These two water soluble complexes were found to interact strongly (K-a(1) = (1.18 +/- 0.28) x 10(5) M-1 and K-a(2) = (1.57 +/- 0.77) x 10(5) M-1) with CT-DNA. Isothermal titration calorimetry (ITC) studies revealed that these complexes bind to CT-DNA through an entropically driven process. Both the complexes showed photo-induced cytotoxicity and exhibit apoptotic activity under photo-irradiation conditions. The comet assay indicated that these complexes can damage cellular DNA, which is attributed to the significant build-up of O-1(2) level even on irradiation with low intensity light (10 J cm(-2), lambda(Range) 450-480 nm). This photoinduced DNA damage and apoptosis in A549 cells was induced by reactive oxygen species (ROS) and occurred through up-regulation of apoptotic marker caspase-3. Control experiments under dark conditions revealed an insignificant cytotoxicity towards these cells for two photosensitive molecules.}, doi = {10.1039/c7dt00670e}, author = {Ramu, Vadde and Aute, Sunil and Taye, Nandaraj and Guha, Rweetuparna and Walker, Michael G. and Mogare, Devaraj and Parulekar, Apoorva and Thomas, Jim A. and Chattopadhyay, Samit and Das, Amitava} } @article {45673, title = {Plant cholesterol biosynthetic pathway overlaps with phytosterol metabolism}, journal = {Nature Plants}, volume = {3}, year = {2017}, month = {JAN}, type = {Article}, abstract = {The amount of cholesterol made by many plants is not negligible. Whereas cholesterogenesis in animals was elucidated decades ago, the plant pathway has remained enigmatic. Among other roles, cholesterol is a key precursor for thousands of bioactive plant metabolites, including the well-known Solanum steroidal glycoalkaloids. Integrating tomato transcript and protein co-expression data revealed candidate genes putatively associated with cholesterol biosynthesis. A combination of functional assays including gene silencing, examination of recombinant enzyme activity and yeast mutant complementation suggests the cholesterol pathway comprises 12 enzymes acting in 10 steps. It appears that half of the cholesterogenesis-specific enzymes evolved through gene duplication and divergence from phytosterol biosynthetic enzymes, whereas others act reciprocally in both cholesterol and phytosterol metabolism. Our findings provide a unique example of nature{\textquoteright}s capacity to exploit existing protein folds and catalytic machineries from primary metabolism to assemble a new, multi-step metabolic pathway. Finally, the engineering of a {\textquoteright}high-cholesterol{\textquoteright} model plant underscores the future value of our gene toolbox to produce high-value steroidal compounds via synthetic biology.}, doi = {10.1038/nplants.2016.205}, author = {Sonawane, P. D. and Pollier, J. and Panda, S. and Szymanski, J. and Massalha, H. and Yona, M. and Unger, T. and Malitsky, S. and Arendt, P. and Pauwels, L. and Almekias-Siegl, E. and Rogachev, I. and Meir, S. and Cardenas, P.D. and Masri, A. and Petrikov, M. and Schaller, H. and Schaffer, A. A. and Kamble, A. and Giri, A. P. and Goossens, A. and Aharoni, A.} } @article {44007, title = {Polymer-based hybrid catalyst of low Pt content for electrochemical hydrogen evolution}, journal = {International Journal of Hydrogen Energy}, volume = {42}, year = {2017}, month = {SEP}, pages = {22821-22829}, type = {Journal Article}, abstract = {

Hydrogen is regarded as the most promising fuel to replace conventional fossil fuel. The electrochemical production of hydrogen requires catalyst and development of efficient non-Pt catalysts or catalysts with low Pt content are in demand. Herein, we demonstrate the photochemical synthesis of a hydrogen evolution electrocatalyst poly(α-terthiophene)-Pt nanoparticle hybrid material (polyTT-Pt) of low Pt content and its electrocatalytic activity. The synthesis of polyTT-Pt hybrid material involves the photoinduced electron transfer between α-terthiophene (α-TT) and and the subsequent in situ growth of polymer and Pt nanoparticles. The irradiation of the mixture of α-TT and with sunlamp initiates the oxidative polymerization and reduction of Pt complex to Pt nanoparticles. The polymer has cabbage-like microstructure and the in situ grown Pt nanoparticles have an average size of 1.8 nm. The Pt nanoparticles are embedded into the polymer matrix as well as randomly distributed over the polymer. The hybrid material contains 2.91 wt\% of Pt and it shows characteristic electrochemical signature with an electrochemically active surface area of 35.7 m{\texttwosuperior}/gPt. The hybrid material polyTT-Pt is electrocatalytically highly active though it contains very small amount of Pt. It efficiently catalyses hydrogen evolution reaction (HER) and the bench mark current density of 10 mA/cm{\texttwosuperior} is achieved at an overpotential of 67 mV. The mass activity of the hybrid catalyst is 1172 mA/mgPt at the overpotential of 67 mV. The high activity is ascribed to the high electronic conductivity of the polymer matrix, facile access of electrolyte due to the embedded small nanoparticles and the presence of large number of catalytically active Pt sites. Tafel analysis suggests that the HER follows the Volmer-Tafel mechanism. Polymer-based hybrid catalyst of low Pt content for electrochemical hydrogen evolution. Available from: https://www.researchgate.net/publication/319039592_Polymer-based_hybrid_catalyst_of_low_Pt_content_for_electrochemical_hydrogen_evolution [accessed Oct 16 2017].

}, doi = {10.1016/j.ijhydene.2017.07.152}, author = {Chakrabartty, S.}, editor = {Gopinath, C. S.} } @article {44129, title = { Porous reduced graphene oxide modified electrodes for the analysis of protein aggregation. part 1: lysozyme aggregation at pH 2 and 7.4}, journal = {Electrochimica Acta}, volume = {254}, year = {2017}, month = {NOV}, pages = {375-383}, type = {Article}, abstract = {Protein instability due to misfolding and aggregation is of big concern for protein based therapeutics because it impacts the bioavailability and immunogenicity of such drugs. The development of simple and cost-effective methods for the analysis of pharmaceutical formulations, indicating the presence or absence of protein aggregates, is consequently of high importance. This work proposes a novel electrochemical interface based on porous reduced graphene oxide coated glassy carbon electrode (GC/prGO) allowing for the early and sensitive identification of protein aggregation by following the change in the oxidative current of the proteins. The novelty of this work lies in the exploration of the ability of GC/prGO interfaces to capture different aggregation behaviors. Lysozyme is used as a model to follow by electrochemistry its aggregation at two pH values, pH 2 and pH 7.4, leading to the formation of amyloid and amorphous aggregates, respectively. Comparing the oxidation peak of lysozyme by differential pulse voltammetry (DPV) for different electrode architectures allowed validating the higher sensitivity of the GC/prGO interface versus bare glassy electrodes or electrodes coated with non-porous reduced graphene oxide. Parallel experiments were performed by fluorescence with thioflavin T, size exclusion chromatography and Atomic Force Microscopy (AFM) imaging. These tests further highlighted the usefulness of GC/prGO electrode to visualize in a fast and reliable manner the changes in the protein structure and the differences between the processes occurring at pH 2 and pH 7.4. In particular, the ability to emphasize changes related to the first steps in aggregation that could be indicative of the aggregation course, recommend the GC/prGO electrode in combination with DPV as a new analytical tool for aggregation studies of biopharmaceuticals. Part 2 of this work will demonstrate later the utility of this approach for the analysis of a fast acting injectable human insulin formulation, Humulin R, used for diabetes treatment as well as for calcitonin. (C) 2017 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.electacta.2017.09.083}, author = {Vasilescu, Alina and Boulahneche, Samia and Chekin, Fereshteh and Gaspar, Szilveszter and Medjram, Mohamed Salah and Diagne, Abdou Aziz and Singh, Santosh K. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {43972, title = {Preparation of MgO supported platinum nanoparticle catalyst using toluene dispersed platinum sol}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {874-91}, type = {Journal Article}, abstract = {

An effective way of anchoring Pt nanoparticles on MgO using toluene dispersed platinum nanoparticles (Pt-NPs) as one of the ingredient is demonstrated. The usage of particles dispersed in toluene allows the retention of size and size distribution of preformed Pt-NPs even after deposition on MgO support with high active surface area, which is crucial for heterogeneous catalysis. The catalyst thus prepared, displayed selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with high turn on frequency (TOF - 105 h-1) with respect to the total Pt content. We attribute this efficient catalytic performance to the uniform distribution and deposition of Pt on the active MgO support and its better accessible surface as evidenced by the cyclic-voltammetry results.

}, keywords = {catalysis, Catalysts, cyclic voltammetry, Deposition, Magnesia, Nanoparticles, sol-gel process}, doi = {10.1016/j.apsusc.2016.12.058}, author = {Seth, J. and Nepak, D. and Chaudhari, V. R. and Prasad, B.L.V.} } @article {45672, title = {Pyrethrin accumulation in elicited hairy root cultures of chrysanthemum cinerariaefolium}, journal = {Plant Growth Regulation}, volume = { 81 }, year = {2017}, month = {APR}, pages = {365-376}, type = {Article}, abstract = {The flowers of Pyrethrum (Chrysanthemum cinerariaefolium) are known to contain Pyrethrins that are naturally occurring potential insecticide. Hairy roots were induced from leaves of C. cinerariaefolium using Agrobacterium rhizogenes strain A4. The root clones were characterized in to four groups i.e. thick, unbranched (D2 and D5), thin, highly branched (D3), thick, branched (B2) and thick, highly branched (D1, D6). Six established hairy root clones showed the presence of pyrethrin and were selected for elicitation studies. Growth kinetics studies revealed highest growth index in hairy root clone D1 (592.0) followed by D6 and D3 on dry weight basis after 40 days of culture. The maximum pyrethrin content was found in the clone D3 (7.2 mg/g dw) which is comparable to the flowers obtained from the variety "Avadh". Hairy root clone D2 (5.2 mg/g dw) and D6 (1.3 mg/g dw) contained pyrethrin but in less amount as compared to clone D3. The PCR analysis showed the presence of rol B and rol C genes in all the six hairy root clones while rol A was detected only in D2 clone. The methanolic extract of D3 clone showed antifungal activities against phytopathogenic fungal strains which were found maximum against Curvuleria andropogonis followed by Colletotrichum acutatum and Rhizoctonia solani. Hairy root clones D2, D3 and D6 were elicited with culture filtrate of endophytic fungus (Fusarium oxysporum) and bacteria (Bacillus subtilis). The culture filtrate (4.0 \%v/v) of both the fungal and bacterial origin was found to be effective in enhancing the pyrethrin content in all the tested hairy root clones. Clone D3 showed maximum pyrethrin content on elicitation with F. oxysporum (9.7 mg/g dw) and B. subtilis (9.7 mg/g dw) culture filtrate, which is 32 \% higher than the non elicited D3 hairy roots (7.2 mg/g dw). F. oxysporum also enhanced the hairy root growth resulting into the higher biomass yield of D3 (50 \%) and D2 (76 \%) in comparison to control non elicited hairy root clones of D3 and D2, respectively leading to higher pyrethrin yield.}, doi = {10.1007/s10725-016-0213-8}, author = {Khan, Shamshad A. and Verma, Priyanka and Banerjee, Suchitra and Chaterjee, Arnab and Tandon, Sudeep and Kalra, Alok and Khaliq, Abdul and Rahman, Laiq Ur} } @article {43775, title = {Rapid synthesis of highly monodispersed silver nanoparticles from the leaves of Salvadora persica}, journal = {Materials Letters}, volume = {205}, year = {2017}, month = {OCT}, pages = {226-229}, type = {Article}, abstract = {We have demonstrated a one pot green protocol for the synthesis of highly monodispersed silver nanoparticles using leaves of Salvadora persica plant. When the leaf extract of Salvadora persica plant reacted with silver nitrate (AgNO3) solution it resulted in the synthesis of highly monodispersed silver nanoparticles with an average size of 3 nm. These nanoparticles were then completely characterized by UV-Visible spectroscopy, Transmission Electron Microscopy, Energy Dispersive Analysis of X-Rays, X-ray diffraction analysis and Fourier Transform Infrared analysis. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.matlet.2017.06.089}, author = {Khan, Mamatha R. Shadab and Salunkhe, Pooja and Satpute, Shruti and Kendurkar, Shuchishweta and Prabhune, Asmita and Deval, Animesh and Chaudhari, Bhushan P.} } @article {43476, title = {Reactive distillation for the production of methoxy propyl acetate: experiments and simulation}, journal = {Industrial \& Engineering Chemistry Research}, volume = {56}, year = {2017}, month = {FEB}, pages = {832-843}, abstract = {Propylene glycol methyl ether acetate is an industrially important solvent. In this work, we study the applicability of reactive distillation (RD) for its synthesis in the presence of an ion-exchange resin, Amberlyst 15, as a catalyst. Simultaneous separation of water during the course of reaction shifts the reaction in the forward direction, which renders cost effectiveness and compactness to the process. The presence of an azeotrope between methoxy propanol and water complicates the separation, leading to a loss of reactants in the product streams, thereby hampering both conversion and purity. Toluene is thus used as an entrainer to further intensify the process. In this work, the intrinsic kinetic parameters are determined from batch reactor data, and used subsequently to simulate the column performance. An experimentally validated simulator is used to examine the effect of various operating and design parameters. Reactant and product losses are minimized to negligible levels and a significant increase in the conversion is realized.}, doi = {10.1021/acs.iecr.6b03489}, author = {Gadekar-Shinde, Shambala and Reddy, Bhoja and Khan, Mohammad and Chavan, Sanjay and Saini, Dauiat and Mahajani, Sanjay} } @article {43810, title = {Reactivity of difunctional polar monomers and ethylene copolymerization: a comprehensive account}, journal = {Macromolecules}, volume = {50}, year = {2017}, month = {AUG}, pages = {5748-5758}, type = {Article}, abstract = {A comprehensive picture of insertion of 1,1-disubstituted difunctional olefins, their ability to double the functional group density at the same level of incorporation as that of monofunctional olefin, and copolymerization with ethylene has been demonstrated. Exposure of a palladium complex [{P boolean AND O}PdMe(L)] (P boolean AND O = kappa(2)-P,O-Ar2PC6H4SO2O with Ar = 2-MeOC6H4.; L = C2H6OS) to methyl 2-acetamidoacrylate (MAAA) revealed slight preference for 1,2-insertion over 2,1-insertion (1.0:0.7). In contrast, insertion of electron-deficient 2-(trifluoromethyl)acrylic acid (TFMAA) unveiled selective 2,1-insertion {via [(P boolean AND O)PdC5H6F3O2] (11)1. The unstable intermediate 11 undergoes beta-hydride and beta-fluoride elimination to produce subsequent insertion and elimination products. The identity of elimination products (E/Z)-2-trifluoromethyl)but-2-enoic acid [17(E/Z)] and 2-(difluoromethylene)butanoic acid (13) was fully established by 1-2D NMR spectroscopy. These insertion experiments, taken together with insertion rates, suggest that MAAA and TFMAA. are amenable to insertion. Polymerization of ethylene with MAAA, TFMAA, acetamidoacrylic acid, 2-bromoacrylic acid, dimethyl allylmalonate, and allylmalonic acid was catalyzed by [{P boolean AND O}PdMe(L)] (L = C2H3N) (S.ACN), and the highest incorporation of 11.8\% was observed for dimethyl allylmalonate (DMAM). The changes in the surface properties of the copolymers after incorporation of difunctional olefins were evaluated by measuring the water contact angle. Copolymer with highest (11.8\% of DMAM) incorporation revealed a reduced water contact angle of 76 degrees. These findings demonstrate that 1,1-disubstituted difunctional olefins are amenable to polymerization, and incorporation of difunctional olefins In polyethylene backbone leads to the production of relatively hydrophilic polyethylene copolymers.}, doi = {10.1021/acs.macromol.7b01356}, author = {Gaikwad, Shahaji R. and Deshmukh, Satej S. and Koshti, Vijay S. and Poddar, Suparna and Gonnade, Rajesh G. and Rajamohanan, Pattuparambil R. and Chikkali, Samir H.} } @article {44011, title = {Repurposing Ivacaftor for treatment of staphylococcus aureus infections}, journal = {International Journal of Antimicrobial Agents}, volume = {50}, year = {2017}, month = {SEP}, pages = {389-392}, type = {Journal Article}, abstract = {

Drug repurposing of non-antimicrobials is a novel method to augment a seriously depleted drug pipeline for targeting drug{\textendash}resistant pathogens. This article highlights the potent antimicrobial activity of Ivacaftor against Staphylococcus aureus, including vancomycin{\textendash} and other multidrug{\textendash}resistant strains. The potent activity of Ivacaftor in vivo is also demonstrated in a murine neutropenic thigh infection model. Taken together, these results support the potential of Ivacaftor as an antimicrobial agent for the treatment of staphylococcal infections. {\textcopyright} 2017 Elsevier B.V. and International Society of Chemotherapy

}, doi = {10.1016/j.ijantimicag.2017.03.020}, author = {Thakare, R. and Das, S. and Vasudevan, N. and Jachak, G.R. and Reddy, D.S. and Dasgupta, A. and Chopra, S.}, editor = {Singh, A. K.} } @article {43725, title = {Rigid peptide scaffold-incorporated structural analogs of the potent antidepressant peptide drug rapastinel (GLYX-13)}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {APR}, pages = {3594-3596}, type = {Article}, abstract = {

Rapastinel (GLYX-13) is a natural amidated tetrapeptide (Thr-Pro-Pro-Thr-NH2)endowed with strong antidepressant property. Rapastinel shows considerable promise for treating drug-resistant major depressive disorder (MDD), and is under clinical phase III development. Herein, we report the synthesis of a novel class of analogues of the potent antidepressant peptide drug rapastinel featuring rigid dipeptide scaffolds comprising proline (L/D) and amino thiophene carboxylates (Atc). Amino thiophene carboxylate is a conformationally constrained aromatic beta-amino acid, known to rigidify peptide backbones thereby limiting the conformational flexibility of peptides and improving proteolytic stability.

}, doi = {10.1002/slct.201700605}, author = {Nadimpally, Krishna Chaitanya and Chakrapani, Aswathi and Prabhu, Priyanka J. and Madica, Krishnaprasad and Sanjayan, Gangadhar J.} } @article {43726, title = {Secondary interactions arrest the hemiaminal intermediate to invert the modus operandi of schiff base reaction: a route to benzoxazinones}, journal = {Journal of Organic Chemistry}, volume = {82}, year = {2017}, month = {APR}, pages = {4342-4351}, type = {Article}, abstract = {Discovered by Hugo Schiff, condensation between amine and aldehyde represents one of the most ubiquitous reactions in chemistry. This classical reaction is widely used to manufacture pharmaceuticals and fine chemicals. However, the rapid and reversible formation of Schiff base prohibits formation of alternative products, of which benzoxazinones are an important class. Therefore, manipulating the reactivity of two partners to invert the course of this reaction is an elusive target. Presented here is a synthetic strategy that regulates the sequence of Schiff base reaction via weak secondary interactions. Guided by the computational models, reaction between 2,3,4,5,6-pentafluoro-benzaldehyde with 2-amino-6methylbenzoic acid revealed quantitative (99\%) formation of 5-methyl-2-(perfluoropheny01,2-dihydro-4H-benzo[d][1,3]oxazin-4-one (15). Electron donating and electron withdrawing ortho-substituents on 2-aminobenzoic acid resulted in the production of benzoxazinones 936. The mode of action was tracked using low temperature NMR, IN vis spectroscopy, and isotopic (O-18) labeling experiments. These spectroscopic mechanistic investigations revealed that the hemiaminal intermediate is arrested by the hydrogen-bonding motif to yield benzoxazinone. Thus, the mechanistic investigations and DFT calculations categorically rule out the possibility of in situ imine formation followed by ring-closing, but support instead hydrogen-bond assisted ring-closing to prodrugs. This unprecedented reaction represents an interesting and competitive alternative to metal catalyzed and classical methods of preparing benzoxazinone.}, doi = {10.1021/acs.joc.7b00352}, author = {Patel, Ketan and Deshmukh, Satej S. and Bodkhe, Dnyaneshwar and Mane, Manoj and Vanka, Kumar and Shinde, Dinesh and Rajamohanan, Pattuparambil R. and Nandi, Shyamapada and Vaidhyanathan, Ramanathan and Chikkali, Samir H.} } @article {45656, title = {Selective molecular sieving in self-Standing porous covalent-Organic-framework membranes}, journal = {Advanced Materials}, volume = {2}, year = {2017}, month = {JAN}, type = {Article}, abstract = {Self-standing, flexible, continuous, and crack-free covalent-organic-framework membranes (COMs) are fabricated via a simple, scalable, and highly cost-effective methodology. The COMs show long-term durability, recyclability, and retain their structural integrity in water, organic solvents, and mineral acids. COMs are successfully used in challenging separation applications and recovery of valuable active pharmaceutical ingredients from organic solvents.}, doi = {10.1002/adma.201603945}, author = {Kandambeth, S. and Biswal, B. P. and Chaudhari, H. D. and Rout, K. C. and Kunjattu, H. S. and Mitra, S. and Karak, S. and Das, A. and Mukherjee, R. and Kharul, U. K. and Banerjee, R.} } @article {44143, title = { Self-assembly of P-chiral supramolecular phosphines on rhodium and direct evidence for Rh-catalyst-substrate interactions}, journal = {Dalton Transactions}, volume = {46}, year = {2017}, month = {OCT}, pages = {13966-13973}, type = {Article}, abstract = {Supramolecular phosphine-derived catalysts are known to provide high enantioselectivity in asymmetric transformations such as hydrogenation, but direct evidence unravelling the role of secondary interactions is largely missing. As a representative case study, the role of hydrogen bonding in asymmetric hydrogenation catalysed by p-chiral supramolecular phosphines is investigated. To establish the nature of hydrogen bonding in the self-assembled Rh-complex, NMR experiments were performed at different concentrations and temperatures. It was found that with increasing concentration of 1-(3-(phenyl(o-tolyl)phosphanyl) phenyl) urea ligand (L1), the NH and NH2 peaks shift downfield. This indicated the presence of intermolecular hydrogen bonding in L1. This observation was further supported by variable temperature NMR experiments wherein, with decreasing temperature, the NH and NH2 resonances of L1 shifted downfield. The downfield shift once again suggests the existence of intermolecular hydrogen bonding in L1. In contrast, the chemical shift of NH and NH2 signals did not significantly change with increasing concentration of the self-assembled Rh-complex (C1). This observation suggested the existence of intramolecular hydrogen bonding in the self-assembled complex. The concentration experiment was further corroborated by variable temperature NMR experiments. No change in the chemical shift of NH2 resonance could be detected with decreasing temperature, which corroborates the existence of intramolecular hydrogen bonding in C1. In a stoichiometric experiment, C1 was treated with hydrogenation substrate N-acetyldehydrophenylalanine (S2) and the proton NMR was recorded. The NH2 protons of the selfassembled Rh-complex were found to shift downfield, as compared to untreated parent C1. These observations indicated that there is a hydrogen bonding interaction between the Rh-complex and the substrate. To further attest this hypothesis, NH and NH2 groups were exchanged with ND and ND2 groups, respectively, and a self-assembled Rh-complex was prepared using the deuterated supramolecular phosphine ligand L1.D. When the deuterated Rh-complex (C1.D) was treated with substrate S2, the ND and ND2 resonances were found to shift downfield. Thus, the labelling experiment further authenticated the existence of catalyst-substrate interactions. The presence of this catalyst-substrate interaction could be one of the parameters that leads to high enantiomeric excess in the asymmetric hydrogenation reaction of S2.}, doi = {10.1039/c7dt02923c}, author = {Koshti, Vijay S. and Sen, Anirban and Shinde, Dinesh and Chikkali, Samir H.} } @article { ISI:000371453700057, title = {Self-exfoliated guanidinium-based ionic covalent organic nanosheets (iCONs)}, journal = {Journal of the American Chemical Society}, volume = {138}, number = {8}, year = {2017}, month = {MAR}, pages = {2823-2828}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Covalent organic nanosheets (CONs) have emerged as functional two-dimensional materials for versatile applications. Although pi-pi stacking between layers, hydrolytic instability, possible restacking prevents their exfoliation on to few thin layered CONs from crystalline porous polymers. We anticipated rational designing of a structure by intrinsic ionic linker could be the solution to produce self-exfoliated CONs without external stimuli. In an attempt to address this issue, we have synthesized three self-exfoliated guanidinium halide based ionic covalent organic nanosheets (iCONs) with antimicrobial property. Self-exfoliation phenomenon has been supported by molecular dynamics (MD) simulation as well. Intrinsic ionic guanidinium unit plays the pivotal role for both self-exfoliation and antibacterial property against both Gram-positive and Gram-negative bacteria. Using such iCONs, we have devised a Mixed matrix membrane which could be useful for antimicrobial coatings with plausible medical benefits.

}, issn = {0002-7863}, doi = {10.1021/jacs.5b13533}, author = {Mitra, Shouvik and Kandambeth, Sharath and Biswal, Bishnu P. and Khayum, Abdul M. and Choudhury, Chandan Kumar and Mehta, Mihir R. and Kaur, Gagandeep and Banerjee, Subhrashis and Prabhune, Asmita and Verma, Sandeep and Roy, Sudip and Kharul, Ulhas K. and Banerjee, Rahul} } @article {43784, title = {Significance of optimal N-doping in mesoporous carbon framework to achieve high specific capacitance}, journal = {Applied Surface Science}, volume = {418}, year = {2017}, month = {OCT}, pages = {40-48}, type = {Article}, abstract = {Nitrogen-doped mesoporous carbon (NMC) has been synthesized by sol-gel process using a mixture of phenol and formaldehyde as source of carbon, and melamine as source of nitrogen. The Ludox-AS40 (40 wt\% SiO2) is employed, for the first time, as hard template to obtain polymeric gel by prolonged heat treatment at 80 degrees C. The wt\% of nitrogen is tuned by varying the weight ratio of melamine to phenol. Stable mesoporous carbon frameworks are obtained by pyrolysis of the dry gel at 800 degrees C in nitrogen atmosphere and treated with alkali to remove silica. One of the carbon framework samples has 11 wt\% nitrogen doping and shows pore volume of 0.5 cm(3) g(-1) and surface area 609 m(2) g(-1). The other carbon frame work sample has 6 wt\% nitrogen doping and shows higher pore volume of 1.1 cm(3) g(-1) and surface area 736 m(2) g(-1). The later sample exhibits highest electrochemical capacitance of 196 F g(-1) at 0.5 A g(-1) while the former shows only 146 F g(-1) at 0.5 A g(-1). However, both the NMC electrodes show good cyclic performance (91\% of the initial capacitance after 1000 cycles) in an aqueous KOH electrolyte. This study demonstrates that there is an optimum level of nitrogen doping required to keep the meso-structure of carbon network intact, simultaneously maintaining high surface area and sufficient electrical conductivity for electrochemical applications. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.apsusc.2016.11.181}, author = {Sahoo, Malaya K. and Gogoi, Pranjal and Rajeshkhanna, G. and Chilukuri, Satyanarayana V. and Rao, G. Ranga} } @article {44035, title = {Silk degumming and utilization of silk sericin by hydrolysis using alkaline protease from beauveria Sp. (MTCC 5184): a green approach}, journal = {Journal of Natural Fibers}, volume = {15}, year = {2017}, month = {JUL}, pages = {1-11}, type = {Article}, abstract = {Conventionally, degumming is carried out at 90{\textdegree}C--110{\textdegree}C temperature by boiling the raw silk with Marseilles soap and sodium bicarbonate which eventually requires a lot of water and energy. In this study, degumming of Chinese bivoltine raw silk fibres with alkaline protease produced by Beauveria sp. (MTCC 5184) is studied. Complete degumming was obtained in 45 min with 75 units of enzyme per gram of silk. Degumming was found to be optimal at 50{\textdegree}C and pH 9.0. Scanning electron micrographs showed that the sericin deposits were removed and the obtained fibres were clean, separated, had smooth feel with shine as compared to untreated fibres. Sericin isolated from silk cocoon (by-product which goes waste) was hydrolyzed with the same alkaline protease obtained from Beauveria sp. to get small molecular weight peptides. These peptides can be utilized further for cosmetic, pharmaceutical, and various industrial applications.}, keywords = {Alkaline Protease, bivoltine, degumming, Silk, weight loss}, issn = {1544-0478}, doi = {10.1080/15440478.2017.1330718}, author = {More, Snehal V. and Chavan, Sakalya and Prabhune, Asmita Ashutosh} } @article {42924, title = {Solid base catalyzed depolymerization of lignin into low molecular weight products}, journal = {Green Chemistry}, volume = {19}, year = {2017}, month = {FEB}, pages = {778-788}, type = {Article}, abstract = {For the biorefinery concept to become commercially viable, it is essential to add value to lignin which is the only naturally available aromatic polymer. A one-pot depolymerization of lignin into reactive substituted phenolic compounds (platform chemicals and octane enhancers) with low molecular weight is of paramount importance and for that, the development of an environmentally benign method is necessary. Herein we report the depolymerization of high molecular weight lignin (60 000 Da) over various recyclable solid base catalysts at 250 degrees C over 1 h. Under these conditions, most of the zeolitic catalysts (NaX, NaY, NaP) showed very high yields of low molecular weight products compared to other catalysts (MgO, CaO, HT, HAP). But in particular, over NaX the maximum yield (51\%) of low molecular weight products was achieved. Identification and quantification of products was done by GC, GC-MS, HPLC, LC-MS, CHNS, NMR and FT-IR techniques. The revelation of retention of most of the functional groups on products present in lignin was confirmed by FT-IR studies. It is observed that the efficiencies of catalysts were dependent on pH, the cation, the type and concentration of basic sites, etc. A unique study on the product adsorption capacities on solids was done and it is recognized that as the strength of basic sites increases, adsorption enhances.}, doi = { 10.1039/c6gc02701f}, author = {Chaudhary, Richa and Dhepe, Paresh Laxmikant} } @article {43892, title = {Sorption of metaldehyde using granular activated carbon}, journal = {Journal of Water Reuse and Desalination}, volume = {7}, year = {2017}, month = {SEP}, chapter = {280-287}, abstract = {

In this work, the ability of granular activated carbon (GAC) to sorb metaldehyde was evaluated. The kinetic data could be described by an intra-particle diffusion model, which indicated that the porosity of the sorbent strongly influenced the rate of sorption. The analysis of the equilibrium sorption data revealed that ionic strength and temperature did not play any significant role in the metaldehyde uptake. The sorption isotherms were successfully predicted by the Freundlich model. The GAC used in this paper exhibited a higher affinity and sorption capacity for metaldehyde with respect to other GACs studied in previous works, probably as a result of its higher specific surface area and high point of zero charge.

}, keywords = {Degradation, Diffusion-controlled Sorption, Environmental Pollution, Granular Activated Carbon, Metaldehyde, Sorption Adsorption}, issn = {2220-1319}, doi = {10.2166/wrd.2016.074}, author = {Salvestrini, S. and Vanore, P. and Bogush, A. and Mayadevi, S. and Campos, L. C.} } @article {45689, title = {Stability studies of cuticle degrading and mycolytic enzymes of myrothecium verrucaria for control of insect pests and fungal phytopathogens}, journal = {Indian Journal of Biotechnology}, volume = {16 }, year = {2017}, month = {JUN}, pages = {404-412}, type = {Article}, abstract = {Myrothecium verrucaria produced extracellularly hydrolytic enzymes which can hydrolyse the insect cuticle as well as fungal cell wall. The addition of polyols, such as glycerol, sorbitol, xylitol (1 M) during ultra -filtration or freeze- drying of enzyme mixture increased the recovery of the enzymes in a concentrated form. Polyols (5 M) increased the temperature and pH stability of the enzymes, in the presence of glycerol chitinase, beta-1,3-glucanase, lipase and protease retained 50-60\% of initial activities at 40 degrees C after 3 h. While xylitol (5 M) was effective in stabilizing activities at pH 5.0 and 7.5 at 25 degrees C for 7 d. In the freeze-dried powder form, > 90\% at 4 degrees C for 1 year and 80-85\% at 25 degrees C for 2 months enzyme activities were retained. The addition of glycerol (1 M) to the enzyme mixture protected enzyme activities under sunlight (60-65\% activity at RT) for 5 d. Because of glycerol (1 M), the efficacy of M verrucaria enzyme preparation to control Helicoverpa armigera infestation in chick pea was increased to 70 +/- 19\%. While without glycerol the efficacy was 55 +/- 23\%. The germination of peanut seeds infected with Sclerotium rolfsii was observed to be increased (70 +/- 5\%) in a pot irrigated with enzyme mixture.}, author = {Chavan, S. B and Vidhate, R. P. and Kallure, G. S. and Dandawate, N. L. and Khire, J. M. and Deshpande, M. V.} } @inbook {44022, title = {Step-growth polymers from cashew nut shell liquid (CNSL)-based aromatic difunctional monomers}, booktitle = {Cashew Nut Shell Liquid}, year = {2017}, pages = {163-214}, abstract = {

Cashew nut shell liquid (CNSL) is an attractive renewable resource material which is available in abundance (44,50,000 tonnes worldwide and 7,53,000 tonnes in India in 2013) at low cost (around 0.27 $/kg in 2015) and is mainly composed of anacardic acid, cardanol, cardol and 2-methyl cardol. Cardanol is obtained as a major product during hot oil extraction or roasting process of CNSL. Cardanol possesses interesting structural features. The aromatic ring of cardanol can undergo electrophilic substitution reactions; the unsaturated side chain can undergo epoxidation, hydrogenation, metathesis, etc., while the phenolic hydroxyl group can undergo various reactions such as esterification and alkylation. Such opportunities of chemical modifications offered by cardanol have been extensively explored to synthesise a range of interesting aromatic difunctional monomers that have subsequently been utilised to prepare a host of step-growth polymers. Summarised herein are research efforts that have contributed towards the synthesis of step-growth polymers based on aromatic difunctional monomers derived from cardanol. The properties of high-performance polymers, with a particular focus on processability and thermal characteristics, are highlighted.

}, doi = {10.1007/978-3-319-47455-7_9}, author = {Chatterjee, Deepshikha and Sadavarte, Nilakshi V. and Shingte, Rahul D. and More, Arvind S. and Tawade, Bhausaheb V. and Kulkarni, Arun D. and Ichake, Amol B. and Avadhani, C. V. and Wadgaonkar, Prakash P.} } @article {43858, title = {Structural phases, magnetic properties and Maxwell-Wagner type relaxation of CoFe2O4/Sr2Co2Fe12O22 ferrite composites}, journal = {Materials Research Express}, volume = {4}, year = {2017}, month = {JUL}, pages = {Article Number: 076105}, type = {Article}, abstract = {CoFe2O4 (S:Y-1:0) and Sr2Co2Fe12O22 (S:Y-0:1) ferrites were synthesized separately by using chemical coprecipitation technique and calcined at 1000 degrees C for 5 h. The mixed ferrite composites (S:Y-3:7, 4:6, 5:5, 6:4 and 7:3) were prepared by physical mixing of individual ferrite powders in required weight proportions. The prepared composites were heated at 1150 degrees C for 5 h in a muffle furnace and then slowly cooled to room temperature. The prepared ferrites were characterized using various instrumental techniques like FTIR, XRD, SEM, VSM and dielectric measurements. The x-ray diffraction studies of pure Sr2Co2Fe12O22 ferrite sample show the presence of M and Y-type hexagonal phases, while the composites consist of spinel and Y-type phases. FTIR spectra of all samples show two bands of Fe-O stretching vibrations. VSM results of composites reveal that the values of the saturation magnetization (M-s) vary from 50.44 emu g(-1) to 31.21 emu g(-1), while remanent magnetization values found from 11.18 emu g(-1) to 3.70 emu g(-1). A higher value of coercivity (H-c = 562 emu g(-1)) is observed in the composite S:Y-3:7 but Mr/Ms ratio of pure and composites is found to be less than 0.5. The dielectric behavior is explained using Maxwell-Wegner type interfacial polarization and N. Rezlescu{\textquoteright}s model.}, doi = {10.1088/2053-1591/aa7699}, author = {Patel, Chirag K. and Solanki, Neha P. and Singh, Charanjeet and Jotania, Rajshree B. and Chauhan, Chetna C. and Kulkarni, Shailja D. and Shirsath, Sagar E.} } @conference {44414, title = {Studies on use of sodium poly acrylate (SPA) for low salt animal skinpreservation}, booktitle = { IULTCS CONGRESS 2017}, year = {2017}, month = {FEB}, publisher = {Central Leather Research Institute}, organization = {Central Leather Research Institute}, address = { ITC CHOLA , CHENNAI}, abstract = {In this study, commercial sodium poly acrylate (SPA) is used along with sodium chloride for low salt skin preservation. SPA is a super-absorbent polymer which can absorb water many times of its own weight.}, author = {Sandhya, K. V. and Brindha, Velappan and Abinandan, Sudharsanam and Vedaraman, N. and John, Sundar V. and Suresha, P. R. and Badiger, Manohar and Chinnaraj, Velappan kandukalpatti and Muralidharan, C.} } @article {43671, title = {Synthesis and antimycobacterial screening of new thiazolyl-oxazole derivatives}, journal = {European Journal of Medicinal Chemistry}, volume = {132}, year = {2017}, month = {MAY}, pages = {333-340}, type = {Article}, abstract = {

In the present study a series of 4-methyl-2-aryl-5-(2-aryl/benzyl thiazol-4-yl) oxazole (4a-v) have been synthesized and evaluated for their preliminary antitubercular, antimicrobial and cytotoxicity activity. Among all the synthesized compounds, 4v reported comparable activity against dormant M. tuberculosis H37Ra and M. bovis BCG strains with respect to standard drug rifampicin. The active compounds from the antitubercular study were further tested for anti-proliferative activity against HeLa, A549 and PANC-1 cell lines using MU assay and showed no significant cytotoxic activity at the maximum concentration evaluated. Further, the synthesized compounds were found to have potential antibacterial activities with MIC range of 2.1-26.8 mu g/mL. High potency, lower cytotoxicity and promising antimycobacterial activity suggested that these compounds could serve as good leads for further optimisation and development. (C) 2017 Elsevier Masson SAS. All rights reserved.

}, doi = {10.1016/j.ejmech.2017.03.065}, author = {Abhale, Yogita K. and Sasane, Amit V. and Chavan, Abhijit P. and Shekh, Saddam Husen and Deshmukh, Keshav K. and Bhansali, Sujit and Nawale, Laxman and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {42938, title = {Synthesis and biological evaluation of new fluconazole β-lactam conjugates linked via 1,2,3-triazole}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {FEB}, pages = {470-479}, abstract = {

Novel 1,2,3-triazole-linked β-lactam{\textendash}fluconazole conjugates 12(a{\textendash}l) were designed and synthesized. The compounds showed potent antifungal activity against two pathogenic Candida strains; Candida albicans ATCC 24433 and Candida albicans ATCC 10231 with MIC values in the range of 0.0625{\textendash}2 μg mL-1. Compounds 12h, 12j and 12k showed promising antifungal activity against all the tested fungal pathogens except C. neoformans ATCC 34554 compared to fluconazole. Compound 12j in which the β-lactam ring was formed using para-anisidine and benzaldehyde was found to be more potent than fluconazole against all the fungal strains with an IC50 value of \<0.015 μg mL-1 for Candida albicans (ATCC 24433). Mechanistic studies for active compounds revealed that the antifungal action was due to ergosterol inhibition. Compounds 12h and 12j at a concentration of 0.125 μg mL-1 caused 91.5 and 96.8\% ergosterol depletion, respectively, compared to fluconazole which at the same concentration caused 49\% ergosterol depletion. The molecular docking study revealed that all the fluconazole β-lactam conjugates 12(a{\textendash}l) could snugly fit into the active site of lanosterol 14α-demethylase (CYP51) with varying degrees of affinities. As anticipated, the binding energy for compound 12j (-58.961 kcal mol-1) was much smaller than that for fluconazole (-52.92 kcal mol-1). The synthesized compounds have therapeutic potential for the control of candidemia.

}, doi = {10.1039/C6NJ03117J}, author = {Divse, Jaisingh M. and Mhaske, Santosh B. and Charolkar, Chaitanya R. and Sant, Duhita G. and Tupe, Santosh G. and Deshpande, Mukund V. and Khedkar, Vijay M. and Nawale, Laxman U. and Sarkar, Dhiman and Pore, Vandana S.} } @article {43261, title = {Synthesis and cell imaging applications of fluorescent mono/di/tri-heterocycl- yl-2,6-dicyanoanilines}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {27}, year = {2017}, month = {DEC}, pages = {979-988}, abstract = {

Synthesis of 3,4,5-triheterocyclyl-2,6-dicyanoanilines, starting from heterocyclic aldehydes and 1,2-diheterocycle-substituted ethanones, is described. 2,6-Dicyanoanilines with one or two heterocyclic substituents have also been synthesized. It was found that some of these molecules have selective cell-staining properties useful for cell imaging applications. The compounds 1g, 10f and 11 were found to stain cytoplasm of the cells in contact but not the nucleus while the compound 12 showed affinity to apoptotic cells resulting in blue fluorescence. The cell imaging results with compound 12 were similar to Annexin V-FITC, a known reagent containing recombinant Annexin V conjugated to green-fluorescent FITC dye, used for detection of apoptotic cells. These compounds were found to be non-cytotoxic and have potential application as cell imaging agents.

}, doi = {10.1016/j.bmcl.2016.12.074}, author = {Pisal, Mahesh M. and Annadate, Ritesh A. and Athalye, Meghana C. and Kumar, Dipak and Chavan, Subhash P. and Sarkar, Dhiman and Borate, Hanumant B.} } @article {44041, title = {Synthesis, antimycobacterial screening and molecular docking studies of 4-aryl-4'-methyl-2'-aryl-2,5'-bisthiazole derivatives}, journal = {Medicinal Chemistry Research}, year = {2017}, month = {JUL}, type = {Article}, abstract = {A series of 4-aryl-4'-methyl-2'-aryl-2,5'-bisthia- zole derivatives (5a{\textendash}o) were synthesized and screened for inhibitory activity against Mycobacterium tuberculosis H37Ra (ATCC 25177) and Mycobacterium bovis BCG (ATCC 35743) strains. Five lead compounds (5e, 5f, 5g, 5h, and 5o) were further confirmed from their dose dependent effect against MTB and Bovine{\textendash}Calmette{\textendash}Guerin. The most promising compounds 5f (MIC90: 11.32 μg/mL), 5h (MIC90: 11.59 μg/mL), and 5o (MIC90: 23.64 μg/mL) showed strong antitubercular activity against dormant MTB and BCG as well as almost insignificant cytotoxicity up to 100μg/mL against HeLa, A549, and PANC-1 human cancer cell lines. Further, the synthesized compounds were found to have potential antibacterial activity against Gram-negative bac- teria, Escherichia coli, Pseudomonas flurescence and Gram- positive bacteria, Staphylococcus aureus, Bacillus subtilis. Most of the synthesized compounds showed moderateactivity against fungal strain Candida albicans. Molecular docking studies of these compounds showed significant interactions with crystal structure of the cytochrome P45014α-sterol demethylase (CYP51) PDB ID: 1E9X. Hydrogen bond interactions with SER261 and VAL395 are important interactions for selective inhibition of designed inhibitors. Compounds 5f, 5h, and 5o showed significant interactions with 1E9X. All the experimental results promote us to consider this series as a starting point for the devel- opment of novel, selective and more potent antitubercular agents in the future.}, doi = {10.1007/s00044-017-1988-5}, author = {Abhale, Yogita K. and Shinde, Abhijit D. and Deshmukh, Keshav K. and Nawale, Laxman U. and Sarkar, Dhiman and Choudhari, Prafulla B. and Kumbhar, Santosh S. and Mhaske, Pravin C.} } @article {43788, title = {Synthesis of amphiphilic isoindigo co-polymers for organic field effect transistors: A comparative study}, journal = {Journal of the apllied polymer science}, volume = {134}, year = {2017}, month = {NOV}, chapter = {45461}, abstract = {

In this work, the amphiphilic isoindigo (am-iInd) based conjugated polymers namely poly(am-iInd-DT) and poly(am-iInd-TT) and their regular counterpart poly(reg-iInd-DT) and poly(reg-iInd-TT) were synthesized to compare their opto-electronic and charge transport properties. They were used to fabricate organic field effect transistors. Charge transport properties in conjugated polymers depend upon intermolecular interaction which is strongly affected by the nature of side chains. The amphiphilic nature of the conjugated polymers has little impact on the charge transport properties. The charge carrier mobility of amphiphilic conjugated polymers was comparable with the regular polymers except poly(reg-iInd-DT) which can be correlated by X-ray diffraction and thin film morphology. (c) 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45461.

}, keywords = {Alkyl, Applications; Conducting polymers; Copolymers; Optical and Photovoltaic applications, conjugated polymers, High-performance, mobility, Packaging, Semicondoctors, Side-chains, Solar-cells, Thin-film Transformer}, issn = {0021-8995}, doi = {10.1002/app.45461}, author = {Dharmapurikar, Satej S. and Arulkashmir, Arulraj and Mahale, Rajashree Y. and Chini, Mrinmoy Kumar} } @article {43526, title = {Synthesis of extended conjugated indolyl chalcones as potent anti-breast cancer, anti-inflammatory and antioxidant agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {27}, year = {2017}, month = {APR}, pages = {1502-1507}, abstract = {In the present investigation, synthesis of a series of extended conjugated delta-chloro-alpha-cyano substituted indolyl chalcones (5a-p) was accomplished by reacting 3-cyanoacetylindole 2 with 3-chloro-3-phenylpropenal 4 in the presence of piperidine. The structural interpretations of newly synthesized compounds were based on chemical and spectroscopic evidences. Anti-tumor evaluation of the synthesized compounds in vitro against MCF-7 (breast carcinoma) cell line revealed that they possess high anti-tumor activities. Among them, compound 5e and 5a demonstrated excellent activity against breast carcinoma (GI(50) <0.1 and mu M respectively) as good as adriamycin (GI(50) <0.1 mu M). The compounds were also screened against the normal Vero monkey cell line, which showed moderate selectivity against inhibition of cancer cells. The effect of extended conjugation on activity authenticated by comparing activity profile of compound 5a, 5i and 5m with their simple analogues. Among the synthesized compounds, 5i and 51 were found to be active anti-inflammatory agents in addition to having noteworthy antioxidant potential. These results suggest the possible use of these compounds for the design and development of novel anti breast cancer agents. (C) 2017 Elsevier Ltd. All rights reserved.}, doi = {10.1016/j.bmcl.2017.02.052}, author = {Bhale, Pravin S. and Chavan, Hemant V. and Dongare, Sakharam B. and Shringare, Sadanand N. and Mule, Yoginath B. and Nagane, Samadhan S. and Bandgar, Babasaheb P.} } @inbook {45804, title = {Synthesis of functional polymers of polar and nonpolar monomers by living and/or controlled polymerization}, booktitle = {Functional polymers: design, synthesis, and applications}, year = {2017}, pages = {3-56}, publisher = {Apple Academic Press}, organization = {Apple Academic Press}, chapter = {Synthesis of functional polymers of polar and nonpolar monomers by living and/or controlled polymerization}, isbn = {978-177188297-2}, issn = {978-177188296-5}, doi = {10.1201/9781315366524}, author = {Chowdhury, S. R. and Sivaram, S.} } @article {43893, title = {Synthesis of isohexide-di(ether-ene)s and ADMET polymerization}, journal = {Green Materials}, volume = {5}, year = {2017}, month = {JUN}, type = {Article}, abstract = {As the fossil fuel reserves deplete and the greenhouse gases increase, the scientific community is challenged to provide sustainable solutions. Sugar-based isohexides can be modified to prepare a library of isohexide-diene monomers for polymerization. Such isohexide diene monomers can be subjected to Acyclic Diene Metathesis Polymerization to obtain green materials. Here we report a single step synthetic protocol to access a small family of isohexide-di(ether-ene)s and the corresponding polymers. The isohexide di(ether-ene)s 2a-2c could be isolated in good to excellent yields under optimized conditions. The resultant isohexide-di(ether-ene)s 2a-2c are potential versatile building blocks for pharmaceuticals and material science. The synthetic utility of 2a-2c was demonstrated by subjecting them to ADMET polymerization using Grubbs 1st and 2nd generation catalysts. The resultant viscous material was evaluated using 1H NMR and MALDI-ToF-MS, which suggests the formation of anticipated ADMET polymers}, doi = {10.1680/jgrma.16.00017}, author = {Rajput, Bhausaheb S. and Lekshmy, Kalpakasseril Girija and Menon, Shamal K. and Chikkali, Samir H.} } @article {43815, title = {Synthesis of meta-substituted monodentate phosphinite ligands and implication in hydroformylation}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {AUG}, pages = {1143-1152}, type = {Article}, abstract = {Synthesis of meta-substituted phosphinite ligands 3,3{\textquoteright}-(methoxyphosphanediyl) bis(N, N-diethylaniline) (4a) and methoxybis(3-methoxyphenyl) phosphane (4b), in high yields, has been demonstrated. Typical phosphorus chemical shift between 110-120 ppm, appearance of methoxy protons and corresponding carbon, as well as ESI-MS spectra unambiguously confirmed the existence of phosphinite ligands 4a and 4b. To demonstrate the synthetic usefulness of 4a and 4b, these ligands were tested in the rhodium catalyzed hydroformylation of 1-octene. The diethylamine substituted ligand 4a was found to be highly active, whereas 4bwas less reactive but revealed slightly better regioselectivity of 62\% under optimized conditions. Additionally, 4a and 4b were found to catalyze the hydroformylation of styrene, 1-undecenol and 1,1-disubstituted functional olefin, methyl methacrylate. Both the ligands displayed excellent conversion of styrene, and 4b revealed an excellent branch selectivity of 75\%. Although 1-undecenol proved to be amenable to hydroformylation (85-90\% conversion to aldehyde), both the ligands failed to discriminate between the linear and branched products. Substrate methyl methacrylate proved to be highly challenging and reduced conversion (between 33-42\%) was observed under optimized conditions. Ligand 4a was found to be highly selective towards linear aldehyde (81\% linear selectivity).}, doi = {10.1007/s12039-017-1341-z}, author = {Deshmukh, Satej S. and Gaikwad, Shahaji R. and Pandey, Swechchha and Mali, Pramod S. and Chikkali, Samir H.} } @article {45725, title = {Temperature-induced misfolding in prion protein: evidence of multiple partially disordered states stabilized by non-native hydrogen bonds}, journal = {Biochemistry}, volume = {56}, year = {2017}, month = {FEB }, pages = {833-844}, type = {Article}, abstract = {

The structural basis of pathways of misfolding of a cellular prion (PrPc) into the toxic scrapie form (PrPsc) and identification of possible intermediates (e.g., PrP*) still eludes us. In this work, we have used a cumulative us of replica exchange molecular dynamics simulation data to construct the conformational free energy landscapes and capture the structural and thermodynamic characteristics associated with various stages of the thermal denaturation process in human prion protein. The temperature-dependent free energy surfaces consist of multiple metastable states stabilized by non-native contacts and hydrogen bonds, thus rendering the protein prone to misfolding. We have been able to identify metastable conformational states with high beta-content (similar to 30-40\%) and low alpha-content (similar to 10-20\%) that might be precursors of PrPsc oligomer formation. These conformations also involve participation of the unstructured N-terminal domain, and its role in misfolding has been investigated. All the misfolded or partially unfolded states are quite compact in nature despite having large deviations from the native structure. Although the number of native contacts decreases dramatically at higher temperatures, the radius of gyration and number of intraprotein hydrogen bonds and contacts remain relatively unchanged, leading to stabilization of the misfolded conformations by non-native interactions. Our results are in good agreement with the established view that the C-terminal regions of the second and third helices (H2 and H3, respectively) of mammal prions might be the Achilles heels of their stability, while separation of B1-H1-B2 and H2-H3 domains seems to play a key role, as well.

}, issn = {0006-2960}, doi = {10.1021/acs.biochem.6b01042}, author = {Chamachi, Neharika G. and Chakrabarty, Suman} } @article {43774, title = {Thermo-responsive PNIPAM-metal hybrids: an efficient nanocatalyst for the reduction of 4-nitrophenol}, journal = {Applied Surface Science}, volume = {420}, year = {2017}, month = {OCT}, pages = {753-763}, type = {Article}, abstract = {Micron size thermoresponsive cross-linked polymeric microgels of poly(N-isopropylacrylamide) (PNIPAM) are used as "microreactor" for embedding metal nanoparticles of different shapes. Using a simple and robust method, we have synthesized various polymer-metal hybrid nanostructures incorporated with Au nanorods (AuNR), Au nanospheres (AuNS) and Ag nanospheres (AgNS). These hybrid nanostructures have been characterized by transmission electron microscope (TEM), UV-vis spectroscopy, dynamic light scattering (DLS) and static light scattering (SLS) followed by their catalytic activity. TEM studies directly confirmed the mondispersity of synthesized hybrid microgels and stability of the embedded metal nanoparticles within the microgels. Optical studies confirmed the presence of respective absorption bands that correspond to AuNS, AgNS and AuNR respectively. Extensive DLS studies demonstrated that although these hybrid microgels preserve their thermoresponsive properties, i.e their hydrodynamic radius decreased with increasing temperature, their thermosensitivity were comparatively lesser than pure PNIPAM microgels. Combining with studies using static light scattering, we further found that AuNS and AgNS were inhomogeneously distributed within microgels where the majority of the nanoparticles present within the loosely cross-linked shell. On the other hand AuNR were distributed more homogeneously within the microgels. Catalytic performance of various nanostructures loaded onto PNIPAM microgel beads were evaluated by studying the catalytic reduction of 4-nitrophenol. Complete catalytic conversion using AgNS occurred in similar to 30 min with a first-order rate constant of 0.159 min(-1) having a 7 min induction period. On the other hand no induction period was observed for AuNS and AuNR and the reaction completed in 3-4 min with a first-order rate constant of 1.607 min(-1) and 1.627 min(-1) respectively. Further, PNIPAM-AuNS and PNIPAM-AuNR possess better catalytic activity as well as recyclability compared to that of PNIPAM-AgNS. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.apsusc.2017.05.172}, author = {Satapathy, Smith Sagar and Bhol, Prachi and Chakkarambath, Aswathy and Mohanta, Jagdeep and Samantaray, Kunal and Bhat, Suresh K. and Panda, Subhendu K. and Mohanty, Priti S. and Si, Satyabrata} } @article {43901, title = {Thermotropic liquid crystalline polyesters derived from 2-chloro hydroquinone}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {SEP}, chapter = {1461-1468}, abstract = {

Synthesis of thermotropic liquid crystalline polyesters derived from bis[4-hydroxy benzoyloxy]-2-chloro-1,4-benzene (BHBOCB) and aliphatic dicarboxylic acid chlorides by interfacial polycondensation methodology is presented. Synthesised polyesters consist of bis[4-hydroxy benzoyloxy]-2-chloro-1,4-benzene as a mesogen and aliphatic diacid chloride as flexible spacer. The length of oligomethylene units in the polymer was varied from the trimethylene to the dodecamethylene groups. Synthesized polyesters were characterized by differential scanning calorimetry and optical microscopy. The transition temperatures and thermodynamic properties were studied for all these polymers. These polyesters exhibited thermotropic liquid crystalline behavior and showed nematic texture except decamethylene spacer. Decamethylene spacer based polyester showed marble texture of smectic C. Mesophase stability of these polyesters was higher than (except first heating cycle of PE-1).\ 

SYNOPSIS The present study deals with the synthesis of thermotropic liquid crystalline polyesters derived from bis[4-hydroxy benzoyloxy]-2-chloro-1,4-benzene (BHBOCB) and aliphatic dicarboxylic acid chlorides by interfacial polycondensation methodology.

}, keywords = {acid, Aliphatic Flexible Spacers Main-chain, Aromatic Mesogen, Elastomer, Morphology, Polydomain, Polymers, Thermotropic Liquid Crystalline Polyesters, Units}, doi = {10.1007/s12039-017-1342-y}, author = {Manurkar, Nagesh and More, Sayaji and Mulani, Khudbudin and Ganjave, Nitin and Chavan, Nayaku} } @article {43799, title = {Transcriptional transitions in alphonso mango (Mangifera indica L.) during fruit development and ripening explain its distinct aroma and shelf life characteristics}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {AUG}, type = {Article}, abstract = {Alphonso is known as the "King of mangos" due to its unique flavor, attractive color, low fiber pulp and long shelf life. We analyzed the transcriptome of Alphonso mango through Illumina sequencing from seven stages of fruit development and ripening as well as flower. Total transcriptome data from these stages ranged between 65 and 143 Mb. Importantly, 20,755 unique transcripts were annotated and 4,611 were assigned enzyme commission numbers, which encoded 142 biological pathways. These included ethylene and flavor related secondary metabolite biosynthesis pathways, as well as those involved in metabolism of starch, sucrose, amino acids and fatty acids. Differential regulation ( p-value <= 0.05) of thousands of transcripts was evident in various stages of fruit development and ripening. Novel transcripts for biosynthesis of mono-terpenes, sesqui-terpenes, di-terpenes, lactones and furanones involved in flavor formation were identified. Large number of transcripts encoding cell wall modifying enzymes was found to be steady in their expression, while few were differentially regulated through these stages. Novel 79 transcripts of inhibitors of cell wall modifying enzymes were simultaneously detected throughout Alphonso fruit development and ripening, suggesting controlled activity of these enzymes involved in fruit softening.}, doi = {10.1038/s41598-017-08499-5}, author = {Deshpande, Ashish B. and Anamika, Krishanpal and Jha, Vineet and Chidley, Hemangi G. and Oak, Pranjali S. and Kadoo, Narendra Y. and Pujari, Keshav H. and Giri, Ashok P. and Gupta, Vidya S.} } @article {43736, title = {Two-dimensional infrared spectroscopy reveals cosolvent-composition-dependent crossover in intermolecular hydrogen bond dynamics}, journal = {Journal of Physical Chemistry Letters}, volume = {8}, year = {2017}, month = {APR}, pages = {1604-1609}, type = {Article}, abstract = {Cosolvents have versatile composition-dependent applications in chemistry and biology. The simultaneous presence of hydrophobic and hydrophilic groups in dimethyl sulfoxide (DMSO), an industrially important amphiphilic cosolvent, when combined with the unique properties of water, plays key roles in the diverse fields of pharmacology, cryoprotection, and cell biology. Moreover, molecules dissolved in aqueous DMSO exhibit an anomalous concentration-dependent nonmonotonic behavior in stability and activity near a critical DMSO mole fraction of 0.15. An experimental identification of the origin of this anomaly can lead to newer chemical and biological applications. We report a direct spectroscopic observation of the anomalous behavior using ultrafast twodimensional infrared spectroscopy experiments. Our results demonstrate the cosolventconcentration-dependent nonmonotonicity arises from nonidentical mechanisms in ultrafast hydrogen-bond-exchange dynamics of water above and below the critical cosolvent concentration. Comparison of experimental and theoretical results provides a molecular-level mechanistic understanding: a distinct difference in the stabilization of the solute through dynamic solute solvent interactions is the key to the anomalous behavior.}, doi = {10.1021/acs.jpclett.7b00270}, author = {Kashid, Somnath M. and Jin, Geun Young and Chakrabarty, Suman and Kim, Yung Sam and Bagchi, Sayan} } @article {44409, title = {Ziegler{\textendash}Natta polymerization and the remaining challenges}, journal = {Resonance}, year = {2017}, month = {NOV}, abstract = {Polymers have become indispensable in the 21st century, and today we cannot imagine life without them. However, till around the beginning of the last century, the science of polymers was considered a very primitive discipline, and majority of the scientific community did not believe that polymers even existed. Hermann Staudinger, among others, fought a long battle to convince the scientific community that polymers are real and that they are long chain molecular entities. Building on this rational bedrock of polymer science, Prof. Karl Ziegler laid the foundation of ethylene polymerization. As outlined by Dr. Sivaram in his articles on Ziegler and Natta, careful observations and systematic analyses of serendipitous results enabled Ziegler to deveop the enormously significant {\textquoteleft}Mulheim atmospheric polyethylene process{\textquoteright}. A decade later, {\textasciidieresis} Cossee and Arlman revealed the mechanism of this polymerization reaction, which is called {\textquoteleft}insertion polymerization{\textquoteright}. Insertion polymerization is popularly known as the {\textquoteleft}Ziegler{\textendash} Natta polymerization{\textquoteright}, in recognition of its founding fathers. Today, the world produces about 180 million tons of polyolefins annually, and polyethylene or polythene has become a household name.}, author = {Chikkali, Samir H.} } @article {45522, title = {1H, 13C and 15N NMR assignments of two plant protease inhibitors (IRD7 and IRD12) from the plant capsicum annuum.}, journal = {Biomolecular NMR Assignments}, volume = {13}, year = {2018}, month = {APR}, pages = {31-35}, type = {Article}, abstract = {

Helicoverpa species are polyphagous pests, with the larval stages causing major damage to economically valuable crops such as cotton, tomato, corn, sorghum, peas, sunflower, wheat and other pulses. Over the years, Helicoverpa armigera has developed resistance to most classes of chemical insecticides, and consequently it is now largely controlled on cotton plants via the use of Bt transgenic crops that express insecticidal Cry toxins which in-turn expedited resistance development in a number of pest species including H. armigera. In a hope to provide other eco-friendly alternatives solutions to counter the effect of the pest, people have identified a number of protease inhibitors (PIs) from the domesticated capsicum species Capsicum annuum, several of which potently inhibited H. armigera gut proteases and impeded growth of H. armigera larva. With a view to explore and enhance the specific nature or properties of these PIs on the mechanism of inhibition, structural and functional characterization of these PIs are inevitable. Towards this goal, we have carried out complete 1H, 13C and 15N resonance assignments of two of these PIs, identified as IRD7 and IRD12, using a suite of 2D and 3D multi-dimensional and multi-nuclear NMR experiments.

}, keywords = {Bt transgenic, Hetero-nuclear NMR, inhibitory repeating domains, Protease inhibitors (PIs), Resonance assignments}, issn = {1874-2718}, doi = {10.1007/s12104-018-9846-z}, author = {Gartia, J. and Barnwal, R.P. and Anangi, R. and Giri, A.R. and King, G. and Chary, K.V.R.} } @article {45362, title = {Accelerated and enantioselective synthesis of a library of p-stereogenic urea phosphines}, journal = {European Journal Of Organic Chemistry}, year = {2018}, month = {DEC}, pages = {6768-6779}, type = {Article}, abstract = {Chiral phosphorus ligands play a central role in majority of the asymmetric transformations. However, access to chiral phosphorus ligands is limited due to their challenging synthesis. Reported here is a highly efficient and accelerated catalytic asymmetric synthesis of P-stereogenic urea containing phosphines leading to a small library of 18 chiral phosphorus compounds. Characteristic two doublets in a P-31 NMR spectrum, spectroscopic and analytical evidences authenticated the formation of [Pd-{(S,S) Me-FerroLANE}(m-phenylurea)(I)] complex. Indeed, [Pd-{(S,S) Me-FerroLANE}(m-phenylurea)(I)] was found to catalyze the C-P coupling reaction and quantitative conversion was observed within 18 hours. Under optimized conditions, iodophenyl urea{\textquoteright}s (2a-2j) were treated with secondary phosphines (1a-1c) in presence of [Pd-{(S,S) Me-FerroLANE}(m-phenylurea)(I)] to obtain P-stereogenic urea phosphines 5a-5r. The identity of these urea derived phosphines was unambiguously ascertained using a combination of spectroscopic and analytical methods. The catalyst tolerated various functional groups and yielded corresponding urea containing phosphines with an enantiomeric excess in the range of 15-62 \%.}, issn = { 1434-193X}, doi = {10.1002/ejoc.201801309}, author = {Koshti, Vijay S. and Gote, Ravindra P. and Chikkali, Samir H.} } @article {45416, title = {Activation of HRI is mediated by Hsp90 during stress through modulation of the HRI-Hsp90 complex}, journal = {International Journal of Biological Macromolecules}, volume = {118}, year = {2018}, month = {OCT}, pages = {1604-1613}, type = {Article}, abstract = {Heme Regulated Inhibitor (HRI) is known to get activated in various stresses such as heme deficiency, heat shock, heavy metal toxicity etc. Heat shock protein 90 (Hsp90), a ubiquitous cytoplasmic protein interacts with HRI in order to regulate protein synthesis. However, it still remains to establish this interaction of HRI and Hsp90 at cellular levels and how this modulation of HRI activity is mediated by Hsp90 during stress. In the present report, using co-immunoprecipitation analysis we show that HRI interacts with Hsp90 and this association is independent of other co-chaperones in in vitro conditions. Further, analysis using truncated domains of HRI revealed that the K1 subdomain is essential for HRI - Hsp90 complex formation. Our in silico protein - protein interaction studies also indicated interaction of Hsp90 with K1 subdomain of HRI. Mammalian two hybrid assay validated this HRI - Hsp90 interaction at cellular levels. When the in vitro kinase assay was carried out with the co-immunoprecipitated complex of HRI - Hsp90, an increase in the kinase activity was observed resulting elevated levels of eIF2 alpha phosphorylation upon heavy metal stress and heat shock. Thus, our results clearly indicate modulation of HRI kinase activity with simultaneous Hsp90 association under stress conditions. (C) 2018 Elsevier B.V. All rights reserved.}, issn = { 0141-8130}, doi = {10.1016/j.ijbiomac.2018.06.204}, author = {Berwal, Sunil K. and Bhatia, Varsha and Bendre, Arneya and Suresh, C. G. and Chatterjee, Sangeeta and Pal, Jayanta K.} } @article {44162, title = {Active and durable alkaline earth metal substituted perovskite catalysts for dry reforming of methane}, journal = {Applied Catalysis B - Environmental}, volume = {224}, year = {2018}, month = {MAY}, pages = {146-158}, type = {Article}, abstract = {Dry reforming of methane is an important process for the utilization of CO2 and to get valuable synthesis gas. Alkaline earth metal substituted MZr1-xNixO3-delta perovskites were synthesized by citrate gel method, characterized and evaluated for dry reforming methane. Characterization results show that the type of alkaline earth substituted at the A site of the perovskite oxide plays an important role in terms of structure, basicity, oxygen deficiency and Ni dispersion. Calcium substituted CaZr0.8Ni0.2O3-delta catalyst shows superior activity in terms of high CH4 and CO2 conversion, while maintaining the activity even after 500 h of reaction. Mechanistic investigations were carried out using transient pulse experiments and insitu FTIR-diffuse reflectance spectroscopy. These experiments reveal that redox property and basicity play important role in activation and sustaining the reforming reaction. Insitu FTIR measurements show that surface hydroxyl groups of the support are vital for high activity and durability of CaZr0.8Ni0.2O3-delta catalyst. XRD and TGA analysis of catalysts after reaction show the structures are retained, but peaks pertaining to coke were observed on SrZr0.8Ni0.2O3-delta and BaZr0.8Ni0.2O3-delta catalysts. On the otherhand, CaZr0.8Ni0.2O3-delta catalyst had only amorphous carbon even after 500 h of reaction. HRTEM studies revealed that SrZr0.8Ni0.2O3-delta and BaZr0.8Ni0.2O3-delta catalysts deactivated mostly due to the formation of carbon nanotubes with Ni embedded in them. Raman and XPS analysis helped in identifying types of coke precursors present on the catalysts. The investigation also illustrate that type of carbon formed depends on the basicity of perovskite oxide, metal to support interaction, Ni crystallite size, surface hydroxyl groups and oxygen defects. This study clearly demonstrated that CaZr0.8Ni0.2O3-delta is an excellent catalyst for dry reforming reaction with long life.}, doi = {10.1016/j.apcatb.2017.10.048}, author = {Dama, Srikanth and Ghodke, Seema R. and Bobade, Richa and Gurav, Hanmant R. and Chilukuri, Satyanarayana} } @article {44422, title = {Analysis of tail-anchored protein translocation pathway in plants}, journal = {Biochemistry and Biophysics Reports }, volume = {14}, year = {2018}, month = {JUL}, pages = {161-167}, abstract = {Tail-anchored (TA) proteins are a special class of membrane proteins that carry out vital functions in all living cells. Targeting mechanisms of TA proteins are investigated as the best example for post-translational protein targeting in yeast. Of the several mechanisms, Guided Entry of Tail-anchored protein (GET) pathway plays a major role in TA protein targeting. Many in silico and in vivo analyses are geared to identify TA proteins and their targeting mechanisms in different systems including Arabidopsis thaliana. Yet, crop plants that grow in specific and/or different conditions are not investigated for the presence of TA proteins and GET pathway. This study majorly investigates GET pathway in two crop plants, Oryza sativa subsp. Indica and Solanum tuberosum, through detailed in silico analysis. 508 and 912 TA proteins are identified in Oryza sativa subsp. Indica and Solanum tuberosum respectively and their localization with respect to endoplasmic reticulum (ER), mitochondria, and chloroplast has been delineated. Similarly, the associated GET proteins are identified (Get1, Get3 and Get4) and their structural inferences are elucidated using homology modelling. Get3 models are based on yeast Get3. The cytoplasmic Get3 from O. sativa is identified to be very similar to yeast Get3 with conserved P-loop and TA binding groove. Three cytoplasmic Get3s are identified for S. tuberosum. Taken together, this is the first study to identify TA proteins and GET components in Oryza sativa subsp. Indica and Solanum tuberosum, forming the basis for any further experimental characterization of TA targeting and GET pathway mechanisms in crop plants. }, doi = {10.1016/j.bbrep.2018.05.001}, author = {Manu, M. S. and Ghosh, Deepanjan and Chaudhari, Bhushan P. and Ramasamy, Sureshkumar} } @article {44214, title = {Aqueous dispersions of lipid nanoparticles wet hydrophobic and superhydrophobic surfaces}, journal = {Soft Matter}, volume = {14}, year = {2018}, month = {JAN }, pages = {205-215}, type = {Article}, abstract = {

Efficient delivery of aqueous sprays to hydrophobic surfaces is the key technological challenge in a wide variety of applications, including pesticide delivery to plants. To account for losses due to bouncing of pesticide sprays off hydrophobic leaf surfaces, a large excess of pesticide is typically employed, resulting in environmentally hazardous run-offs that contaminate soil and ground water. We demonstrate that aqueous dispersions of glycerol monooleate nanoparticles, called cubosomes, wet hydrophobic and superhydrophobic surfaces and adhere to them. Cubosomes comprise glycerol monooleate lipid molecules self-assembled into a double diamond cubic phase, that form stable aqueous dispersions that are sterically stabilized using amphiphilic block copolymers. We use high speed imaging to monitor the spreading and retraction of aqueous drops impinged on model hydrophobic substrates and on superhydrophobic lotus leaves. We show that cubosomes diffuse to hydrophobic substrates and reorganize to form a thin, approximate to 2 nm adsorbed lipid layer during the millisecond time scales that characterize drop impact. This adsorbed film drastically reduces the water contact angle, transforming the hydrophobic surface to hydrophilic, thus facilitating retention of the aqueous drop on the surface. Aqueous drops of cubosomes impinged at low velocities on inclined natural superhydrophobic lotus leaf surfaces do not roll off, unlike drops of water or surfactant solutions. When sprayed on inclined lotus leaves, corresponding to the case of high velocity drop impingement, cubosome dispersions form a continuous wetting film. Our results have important implications for efficient, environment-friendly delivery of pesticide sprays.

}, issn = {1744-683X}, doi = {10.1039/c7sm01817g}, author = {Kumar, Manoj and Kulkarni, Mayuresh A. and Chembu, Narendiran G. and Banpurkar, Arun and Kumaraswamy, Guruswamy} } @article {45377, title = { Balancing antimicrobial performance with hemocompatibility in amphiphilic homopolymers}, journal = {Journal of Polymer Science Part A- Polymer Chemistry}, volume = {56}, year = {2018}, month = {NOV}, pages = {2391-2396}, type = {Article}, abstract = {This work establishes amphiphilic polymethacrylates as new antimicrobial candidates that can be synthesized through a combination of controlled free radical polymerization and sequential postpolymerization modification protocols. When conjugated with a polyethylene glycol segment, the block copolymers exhibit a balanced performance between high antibacterial activity and high hemocompatibility.}, issn = { 0887-624X}, doi = { 10.1002/pola.29213}, author = {Zhu, Zhiyuan and Jeong, Gookyeong and Kim, Seung-Jin and Gadwal, Ikhlas and Choe, Youngson and Bang, Joona and Oh, Min-Kyu and Khan, Anzar and Rao, Jingyi} } @article {43958, title = {Bifunctional role of Pd/MMT-K 10 catalyst in direct transformation of furfural to 1,2-pentanediol}, journal = {Catalysis Today}, volume = {309}, year = {2018}, month = {JUL}, pages = {195-201}, type = {Article}, abstract = {

The acid functionality of montmorillonite clay K 10 (MMT-K 10) was found to play a key role to give 1,2-pentanediol (1,2-PeDO) in Pd catalysed furfural hydrogenation. Among various Pd loadings on MMT-K 10, 3\% Pd/MMT-K 10 catalyst exhibited excellent performance giving almost complete conversion of FFR and the highest selectivity of 66\% to 1,2-PeDO. Py-IR of the catalyst evidenced the presence of Br{\o}nsted acidity which was responsible in C5-O cleavage of furan ring after the formation of furfuryl alcohol which is the first step intermediate in FFR hydrogenation. At a lower temperature of 140 {\textdegree}C, highest selectivity of 56\% was achieved for FAL while increase in temperature to 220 {\textdegree}C, enhanced the selectivity to 1,2-PeDO. Keeping the temperature constant at 220 {\textdegree}C, with increase in H2 pressure from 500 to 750 psig, resulted in decrease in 1,2-PeDO selectivity from 66 to 34\% with proportionate increase in THFAL selectivity. Thus as per the requirement, the product selectivities can be tailored by varying the reaction parameters suitably. Several control experiments were also performed the results of which combined with the characterization data allowed to propose a plausible reaction pathway for the formation of 1,2-PeDO.

}, doi = {10.1016/j.cattod.2017.08.002}, author = {Date, Nandan S. and Chikate, Rajeev C. and Roh, Hyun-Seog and Rode, Chandrashekhar V.} } @article {45445, title = {Biomass-mediated synthesis of Cu-doped TiO2 nanoparticles for improved-performance lithium-ion batteries}, journal = {ACS Omega}, volume = {3}, year = {2018}, month = {OCT}, pages = {13676-13684}, type = {Article}, abstract = {

Pure TiO2 and Cu-doped TiO2 nanoparticles are synthesized by the biomediated green approach using the Bengal gram bean extract. The extract containing biomolecules acts as capping agent, which helps to control the size of nanoparticles and inhibit the agglomeration of particles. Copper is doped in TiO2 to enhance the electronic conductivity of TiO2 and its electrochemical performance. The Cu-doped TiO2 nanoparticle-based anode shows high specific capacitance, good cycling stability, and rate capability performance for its envisaged application in lithium-ion battery. Among pure TiO2, 3\% Cu-doped TiO2, and 7\% Cu-doped TiO2 anode, the latter shows the highest capacity of 250 mAh g(-1) (97.6\% capacity retention) after 100 cycles and more than 99\% of coulombic efficiency at 0.5 A g(-1) current density. The improved electrochemical performance in the 7\% Cu-doped TiO2 is attributed to the synergetic effect between copper and titania. The results reveal that Cu-doped TiO2 nanoparticles might be contributing to the enhanced electronic conductivity, providing an efficient pathway for fast electron transfer.

}, doi = {10.1021/acsomega.8b01903}, author = {Kashale, Anil A. and Dwivedi, Pravin K. and Sathe, Bhaskar R. and Shelke, Manjusha V. and Chang, Jia-Yaw and Ghule, Anil V.} } @article {45557, title = {BIOPYDB: a dynamic human cell specific biochemical pathway database with advanced computational analyses platform}, journal = {Journal of integrative bioinformatics}, volume = {15}, year = {2018}, month = {MAR }, type = {Article}, abstract = {BIOPYDB: BIOchemical PathwaY DataBase is developed as a manually curated, readily updatable, dynamic resource of human cell specific pathway information along with integrated computational platform to perform various pathway analyses. Presently, it comprises of 46 pathways, 3189 molecules, 5742 reactions and 6897 different types of diseases linked with pathway proteins, which are referred by 520 literatures and 17 other pathway databases. With its repertoire of biochemical pathway data, and computational tools for performing Topological, Logical and Dynamic analyses, BIOPYDB offers both the experimental and computational biologists to acquire a comprehensive understanding of signaling cascades in the cells. Automated pathway image reconstruction, cross referencing of pathway molecules and interactions with other databases and literature sources, complex search operations to extract information from other similar resources, integrated platform for pathway data sharing and computation, etc. are the novel and useful features included in this database to make it more acceptable and attractive to the users of pathway research communities. The RESTful API service is also made available to the advanced users and developers for accessing this database more conveniently through their own computer programmes.}, issn = {1613-4516}, doi = {10.1515/jib-2017-0072}, author = {Chowdhury, S. and Sinha, N. and Ganguli, P. and Bhowmick, R. and Singh, V. and Nandi, S. and Sarkar, R. R.} } @article {44638, title = {Cascade synthesis of 5-(Acetoxymethyl) furfural from carbohydrates over Sn-mont catalyst}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {AUG}, pages = {8770-8778}, abstract = {

The 5-(Acetoxymethyl)furfural (AcMF) is emerged as an important alternative for 5-(hydroxymethyl)furfural (HMF). It is also a starting material for those products which are typically prepared from HMF. The growing importance of AcMF encouraged us to prepare it directly from cheap and abundant carbohydrates. The production AcMF from glucose and glucose-like carbohydrates is an exigent assignment, owing to tough isomerisation of glucose to fructose. The Sn-Mont catalyst having a unique combination of Lewis as well as Bronsted acid sites was employed for direct glucose conversion into AcMF. Lewis acid sites of Sn-Mont facilitate the isomerisation of glucose to fructose. At the same time, dehydrative-esterification of fructose to AcMF is catalyzed by Bronsted acid sites of Sn-Mont. Different concentrations of Sn containing Sn-Mont catalysts were by prepared mixing montmorillonite clay with different molar concentration (e.g. 0.1 M-0.4 M) of aqueous solutions of SnCl4 center dot 5H(2)O. AcMF was produced in as high as 43\% yield directly from glucose over Sn-Mont(0.3 M) catalyst owing to its highest acid strength. The efficacy of Sn-Mont(0.3 M) catalyst was also probed for sucrose and fructose that resulted in 53\% and 58\% yield of AcMF, respectively. The critical properties of all the prepared Sn-Mont catalysts were investigated through XRD, BET surface area, ICP-OES, temperature-programmed desorption of NH3 and pyridine-FTIR and XPS techniques.

}, keywords = {5-(Acetoxymethyl)furfural, Bronsted/Lewis acid, carbohydrates, Dehydrative-esterification, Sn-Mont}, issn = {2365-6549}, doi = {10.1002/slct.201802040}, author = {Shinde, Suhas and Deval, Kashmira and Chikate, Rajeev and Rode, Chandrashekhar} } @article {43957, title = {Cascade synthesis of dihydrobenzofuran via claisen rearrangement of allyl aryl ethers using FeCl 3 /MCM-41 catalyst}, journal = {Journal of Saudi Chemical Society}, volume = {22}, year = {2018}, month = {MAY}, pages = {396-404}, type = {Article}, abstract = {

Dihydrobenzofuran as one of the active ingredients of the naturally occurring motif is synthesized by using in situ generation of ortho allyl phenols. Aryl allyl ethers on reacting with catalytic amounts of non noble metal iron (III) chloride supported on MCM-41 under moderate reaction conditions yield dihydrobenzofuran. First step via Claisen rearrangement gives ortho allyl phenol followed by its in situ cyclization to yield dihydrobenzofuran in very good yields. Both Lewis as well as Br{\o}nsted acidity of the catalyst as evidenced by Py-FTIR studies was found to catalyze the cascade synthesis of dihydrobenzofuran. The scope of the present strategy was successfully demonstrated for several substrates with varying electronic effects for the synthesis of corresponding dihydrobenzofuran with high yields in a range of 71-86\%.

}, keywords = {Aryl allyl ether, Claisen rearrangement, Dihydrobenzofuran, Ferric chloride, MCM-41}, issn = {1319-6103}, doi = {10.1016/j.jscs.2017.08.006}, author = {Sakate, Sachin S. and Shinde, Suhas H. and Kasar, Gayatri B. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {44374, title = {Catalytic enantioselective 1,3-alkyl shift in alkyl aryl ethers: efficient synthesis of optically active 3,3 {\textquoteright}-diaryloxindoles}, journal = {Angewandte Chemie-International Edition}, volume = {57}, year = {2018}, month = {MAY}, pages = {5735-5739}, abstract = {Reported is the first organocatalytic asymmetric 1,3-alkyl shift in alkyl aryl ethers for the synthesis of chiral 3,3{\textquoteright}-diaryloxindoles using a chiral Bronsted acid catalyst. Preliminary results showed that each enantiomer of the 3,3{\textquoteright}-diaryloxindole, and a racemic mixture, showed different antiproliferative activities against HeLa cell lines by using an MTT assay.}, doi = {10.1002/anie.201801650}, author = {Gade, Amol B. and Bagle, Pradip N. and Shinde, Popat S. and Bhardwaj, Vipin and Banerjee, Subhrashis and Chande, Ajit and Patil, Nitin T.} } @article {45397, title = {Characterization of mineral phosphate solubilizing and plant growth promoting bacteria from termite soil of arid region}, journal = {3 Biotech}, volume = {8}, year = {2018}, month = {OCT}, type = {Article}, abstract = {Five highly efficient phosphate solubilizing bacteria, viz., Pantoea sp. A3, Pantoea sp. A34, Kosakonia sp. A37, Kosakonia sp. B7 and Bacillus sp. AH9 were isolated from termitorial soils of Sanjivani island of southern Maharashtra, India. These isolates were characterized and explored for phosphate solubilization and plant growth promotion. Among these, Bacillus sp. AH9 showed highest phosphate solubilization index (3.5) and solubilization efficiency (250\%) on Pikovskaya agar. Interestingly, Pantoea sp. A34 displayed maximum mineral phosphate solubilization (1072.35mg/L) in liquid medium and during this period the pH dropped to 3.13. All five isolates had highest P solubilization at 48h after inoculation. During mineral phosphate solubilization, both gluconic acid and 2-keto gluconic acid were produced by Kosakonia and Bacillus isolates, while only 2-keto gluconic acid was detected in Pantoea isolates. Highest organic acid (39.07 +/- 0.04g/L) production was envisaged in Bacillus sp. AH9, while Pantoea sp. A34 produced the least amount (13.00 +/- 0.01g/L) of organic acid. Seed bacterization with Pantoea sp. A3 and Kosakonia sp. A37 resulted in 37\% and 53\% increase in root length of tomato seedlings, respectively, while Pantoea sp. A34 and Kosakonia sp. B7 had deleterious effects on root length as well as overall growth of the seedlings. To our knowledge, this is the first report of plant growth promoting potential of microorganisms isolated from termitorial soil of Sanjivani island, which is a drought-prone area. Therefore, such efficient growth promoting P solubilizers can offer an effective solution for sustainable agriculture in arid, dryland farming and drought-prone regions.}, issn = { 2190-572X}, doi = { 10.1007/s13205-018-1488-4}, author = {Chakdar, Hillol and Dastager, Syed G. and Khire, Jayant M. and Rane, Digeshwar and Dharne, Mahesh S.} } @article {44429, title = {Chemical oxidative and solid state synthesis of low molecular weight polymers for organic field effect transistors}, journal = {Chemical Physics Letters}, volume = {696}, year = {2018}, month = {MAR}, pages = {48-54}, abstract = {Solution processability of the precursor molecules is a major issue owing to their limited solubility for the synthesis of conjugated polymers. Therefore, we favour the solvent free solid state chemical oxidative polymerization route for the synthesis of diketopyrrolopyrrole (DPP) based donor-acceptor (D-A) type conjugated polymers. D-A type polymer Poly(S-OD-EDOT) which contains DPP coupled with EDOT donor units is synthesized via solid state polymerization method. The polymer is employed as an active layer for organic field-effect transistors to measure charge transport properties. The Polymer shows good hole mobility 3.1 x 10(-2) cm(2) V-1 s(-1), with a on/off ratio of 1.1 x 10(3). (C) 2018 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.cplett.2018.02.021}, author = {Mahale, Rajashree Y. and Dharmapurikar, Satej S. and Chini, Mrinmoy Kumar} } @article {45415, title = {Chitosan-based bionanocomposites for biomedical application}, journal = { Bioinspired Biomimetic and Nanobiomaterials}, volume = {7}, year = {2018}, month = {DEC }, pages = {219-227}, type = {Article}, abstract = {Natural polymers have greatly impacted the advancement of modern medicine. Natural polymer-based biomaterials are biodegradable. A significant advantage of natural polymers is that they can be broken down and removed from the body after they have served their function. A wide range of novel biomaterials from natural polymers has been investigated to meet new challenges in medical science. Chitosan is one of the natural polymers which have been widely used in the biomedical field. Nanotechnology is one of the most popular areas of current research. In the area of nanotechnology, polymer and metal/metal oxide nanoparticle matrix-based nanocomposites have generated a significant amount of attention in the recent literature. These bionanocomposites have wide-ranging applications in drug delivery and tissue engineering. This paper discusses polymer-metal/metal oxide nanoparticle matrix-based nanocomposite biomaterials and their applications in the biomedical field - that is, drug delivery and tissue engineering applications.}, issn = {2045-9858}, doi = {10.1680/jbibn.15.00015}, author = {Kumari, Sangeeta and Singh, Raj Pal and Chavan, Nayaku N. and Annamalai, Pratheep K.} } @article {44432, title = {Co-gasification of high ash coal{\textendash}biomass blends in a fluidized bed gasifier: experimental study and computational intelligence-based modeling}, journal = {Waste and Biomass Valorization}, volume = {11}, year = {2018}, month = {JUN}, pages = {1-19}, type = {Article}, abstract = {Co-gasification (COG) is a clean-coal technology that uses a binary blend of coal and biomass for generating the product gas; it is environment-friendly since it emits lesser quantities of pollutants compared to the coal gasification process. Although coals found in many countries contain high percentages of ash, co-gasification studies involving such coals, and the process modeling thereof, are rare. Accordingly, this study presents results of the co-gasification experiments conducted in a fluidized-bed gasifier (FBG) pilot plant using as a feed the blends of high ash Indian coals with three biomasses, namely, rice husk, press mud, and sawdust. Since the underlying physicochemical phenomena are complex and nonlinear, modeling of the COG process has been performed using three computational intelligence (CI)-based methods namely, genetic programming, artificial neural networks, and support vector regression. Each of these formalisms was employed separately to develop models predicting four COG performance variables, namely, total gas yield, carbon conversion efficiency, heating value of product gas, and cold gas efficiency. All the CI-based models exhibit an excellent prediction accuracy and generalization performance. The co-gasification experiments and their modeling presented here for a pilot-plant FBG can be gainfully utilized in the efficient design and operation of the corresponding commercial scale co-gasifiers utilizing high ash coals.}, keywords = {Artificial neural networks, Co-gasification, Computational intelligence, Fluidized bed gasifier, genetic programming, support vector regression}, issn = {1877-2641}, doi = {10.1007/s12649-018-0378-7}, author = {Tiwary, Shishir and Ghugare, Suhas B. and Chavan, Prakash D. and Saha, Sujan and Datta, Sudipta and Sahu, Gajanan and Tambe, Sanjeev S.} } @article {44443, title = {Cross-metathesis of biorenewable dioxalates and diols to film-forming degradable polyoxalates}, journal = {Journal of Polymer Science Part A-Polymer Chemistry}, volume = {56}, year = {2018}, month = {JUL}, pages = {1584-1592}, abstract = {Starting from commonly available sugar derivatives, a single step protocol to access a small family of isohexide-dioxalates (2a-c) has been established. The synthetic competence of 2a-c has been demonstrated by subjecting them to condensation polymerization. Quite surprisingly, the proton NMR of poly(isomannide-co-hexane)oxalate revealed a 1:2 ratio between isomannide-dioxalate (2a) and 1,6-hexanediol (3a) in the polymer backbone. This intriguing reactivity was found to be an outcome of a cross metathesis reaction between 2a and 3a. The cross metathesis products 3a[2-(2-methoxyacetoxy)ethyl 2-(2-hydroxyethoxy)-2-(3-oxydanylidene)acetate] and 2a(3R,6R)-6-hydroxyhexahydrofuro[3,2-b]-furan-3-yl methyl oxalate were isolated in a control experiment. Based on direct and indirect evidence, and control experiments, an alternative polymerization mechanism is proposed. Polymerization conditions were optimized to obtain polyoxalates P1(2a-3a)-P9(2c-3c) with molecular weights in the range of 14,000-68,000 g/mol, and narrow polydispersities. The identity of the polyoxalates was unambiguously established using 1-2D NMR spectroscopy, MALDI-ToF-MS, and GPC measurements. The practical implication of these polymers is demonstrated by preparing transparent, mechanically robust films. The environmental footprint of the selected polyoxalates was investigated by subjecting them to solution and solid-state degradation. The polyoxalates were found to be amenable to degradation. (c) 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 1584-1592}, doi = {10.1002/pola.29043}, author = {Rajput, Bhausaheb S. and Ram, Farsa and Menon, Shamal K. and Shanmuganathan, Kadhiravan and Chikkali, Samir H.} } @article {44451, title = {Design and synthesis of 2-amino-thiophene-tethered ureidopenicillin analogs with potentantibacterial and antitubercular activity}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {MAR}, pages = {3122-3126}, abstract = {Ureidopenicillins are a class of penicillins which are antibiotics active against gram-negative bacteria. Herein, we report the synthesis of 2-aminothiophene-tethered ureidopenicillin analogues and their in vitro antibacterial and antitubercular activity. Intriguingly, unlike the reported ureidopenicillins which are active against gram-negative bacteria, the synthesised 2-aminothiophene-tethered ureidopenicillins were significantly active against Gram-positive bacterial strains and showed moderate inhibition towards gram-negative bacterial strains. Among all the analogs, compound 1b containing 2-aminothiophene moiety with minimum inhibitory concentration (MIC): 0.29, 0.32, > 10, > 10 mg/ml for Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa, respectively, showed better anti-bacterial profile as compared to cephalexin and equipotent to ampicillin and amoxicillin on gram-positive bacterial strains. All the derivatives were also screened for anti-TB activity against mycobacterium tuberculosis H37Ra. Among the series, cycloocta-thiophene-tethered cephalexin analog 3c displayed excellent antitubercular activity with MIC values 0.78 mg/ml. Low cytotoxicity and high selectivity index indicate the efficacy of 3c against mycobacterial infections. The results from present study offer a novel approach to modify the existing drug class of ureidopenicillins to yield antimicrobials with promising utility.}, doi = {10.1002/slct.201800027}, author = {Wagh, Mahendra A. and Baravkar, Sachin B. and Jedhe, Ganesh S. and Borkute, Rachna and Choudhari, Amit S. and Sarkar, Dhiman and Sanjayan, Gangadhar J.} } @article {45359, title = {Design, synthesis and biological screening of novel 1,3,4-oxadiazoles as antitubercular agents}, journal = {Chemistryselect}, volume = {3}, year = {2018}, month = { DEC}, pages = { 13304-13310}, type = {Article}, abstract = {A series of novel 2,5-disubstitued 1,3,4-oxadiazole derivatives bearing 2,2-dimethyl-2,3-dihydrobenzofuran scaffold has been synthesized and screened for antitubercular activity. All the synthesized compounds were characterized by IR, H-1 NMR, C-13-NMR and Mass spectral study. The in vitro antitubercular activity of the synthesized compounds was evaluated against Mycobacterium tuberculosis H37Ra(ATCC 25177) strain. Among the synthesized compounds, four compound displayed good antitubercular activity IC50 values in low micro-gram range (<10 mu g/mL). The antitubercular data suggested that growth inhibition MTB can be imparted by the introduction of a 4- trifluoromethyl phenyl acetylene substituent. Specificity of these compounds was checked by screening them for their anti-bacterial activity against four bacterial strains (Gram-negative strains: E. coli, S. aureus; Gram-positive strains: P. aeruginosa and B. subtilis). None of the compound displayed antibacterial activity against any of the seleted strain. Molecular docking studies were carried out on InhA (FabI/ENR) which shows that the synthesized compounds bind at the catalytic site in a most favourable manner suggesting their potential as anti-mycobacterial agents. The research presented here was found to be adventitious for the development of new therapeutic agents against Mycobacterium infection.}, issn = { 2365-6549}, doi = {10.1002/slct.201802227}, author = {Tambe, Macchindra S. and Choudhari, Amit and Sarkar, Dhiman and Sangshetti, Jaiprakash and Patil, Rajesh and Gholap, Somnath S.} } @article {45398, title = {Determination of the effect of polyamines on an oil-degrading strain of Yarrowia lipolytica using an odc minus mutant}, journal = {Fems Yeast Research }, volume = {18}, year = {2018}, month = {DEC}, pages = {10.1093/femsyr/foy073}, type = {Article }, abstract = {Yarrowia lipolytica is an ascomycetous dimorphic yeast with immense potential for industrial applications, including bioremediation of crude oil-contaminated environments. It has been shown that a dimorphic marine isolate of Y. lipolytica (var. indica) has significant capacity to degrade fatty acids and alkanes, when in its yeast morphology. It has also been demonstrated that polyamines play an important role in the yeast-to-mycelium transition of different strains of Y. lipolytica that are unable to utilize those carbon sources. To determine the role of polyamines on their capacity to utilize oils and hydrocarbons, on the dimorphic transition, and also on other characteristics of the var. indica strain of Y. lipolytica, we proceeded to obtain ornithine decarboxylase minus (odc(-)) mutants. These mutants behaved as yeasts independently of the concentrations of putrescine added. Further, they conserved the oil-degrading capacity of the parent strain. The odc(-) mutant can thus be used in fatty acid degradation, and oil spill remediation with distinct advantages.}, issn = { 1567-1356}, doi = { 10.1093/femsyr/foy073}, author = {Campos-Gongora, E. and Palande, A. S. and Leon-Ramirez, C. and Pathan, E. K. and Ruiz-Herrera, J. and Deshpande, M. V.} } @article {44453, title = {Dihedral angle control to improve the charge transport properties of conjugated polymers in organic field effect transistors}, journal = {Chemical Physics Letters}, volume = {695}, year = {2018}, month = {MAR}, pages = {51-58}, abstract = {Diketopyrrolopyrrole (DPP) and i-Indigo (i-Ind) are two monomers that are widely explored as active materials in organic field effect transistor and solar cells. These two molecules showed impressive charge carrier mobility due to better packing that are facilitated by quadrupoles. We hypothesized that the copolymers of these monomers would also exhibit high charge carrier mobility. However, we envisioned that the dihedral angle at the connecting point between the monomers will play a crucial role in packing as well as charge transport. To understand the impact of dihedral angle on charge transport, we synthesized three copolymers, wherein the DPP was sandwiched between benzenes, thiophenes and furans. The copolymer of i-Indigo and furan comprising DPP showed a band gap of 1.4 eV with a very high dihedral angle of 179 degrees. The polymer was found to pack better and the coherence length was found to be 112 angstrom. The hole carrier mobility of these polymer was found to be highest among the synthesized polymer i. e. 0.01 cm(2)/vs. The copolymer comprising benzene did not transport hole and electrons. The dihedral angle at the connecting point between i and Indigo and benzene DPP was 143 angstrom, which the packing and consequently charge transport properties. (C) 2018 Elsevier B. V. All rights reserved.}, doi = {10.1016/j.cplett.2018.01.052}, author = {Dharmapurikar, Satej S. and Chithiravel, Sundaresan and Mane, Manoj V. and Deshmukh, Gunvant and Krishnamoorthy, Kothandam} } @article {44386, title = {Disintegrable NIR light triggered gold nanorods supported liposomal nanohybrids for cancer theranostics}, journal = {Bioconjugate Chemistry}, volume = {29}, year = {2018}, month = {MAY}, pages = {1510-1518}, abstract = {In this work, facile synthesis and application of targeted, dual therapeutic gold nanorods-liposome (GNR-Lipos) nanohybrid for imaging guided photothermal therapy and chemotherapy is investigated. The dual therapeutic GNR-Lipos nanohybrid consists of GNR supported, and doxorubicin (DOX) loaded liposome. GNRs not only serve as a photothermal agent and increase the drug release in intracellular environment of cancer cells, but also provide mechanical strength to liposomes by being decorated both inside and outside of bilayer surfaces. The designed nanohybrid shows a remarkable response for synergistic chemophotothermal therapy compared to only chemotherapy or photothermal therapy. The NIR response, efficient uptake by the cells, disintegration of GNR-Lipos nanohybrid, and synergistic therapeutic effect of photothermal and chemotherapy over breast cancer cells MDA-MB-231 are studied for the better development of a biocompatible nanomaterial based multifunctional cancer theranostic agent.}, doi = {10.1021/acs.bioconjchem.7b00801}, author = {Chauhan, Deepak S. and Prasad, Rajendra and Devrukhkar, Janhavi and Selvaraj, Kaliaperumal and Srivastava, Rohit} } @article {44629, title = {Effect of sodium dodecyl sulfate surfactant on methane hydrate formation: a molecular dynamics study}, journal = {Journal of Physical Chemistry B}, volume = {122}, year = {2018}, month = {JUN}, pages = {6536-6542}, abstract = {

In experimental studies, it has been observed that the presence of sodium dodecyl sulfate (SDS) significantly increases the kinetics of hydrate formation and the final water-to-hydrate conversion ratio. In this study, we intend to understand the molecular mechanism behind the effect of SDS on the formation of methane hydrate through molecular dynamics simulation. Hydrate formation conditions similar to that of laboratory experiments were chosen to study hydrate growth kinetics in 1 wt \% SDS solution. We also investigate the effect of interactions with isolated SDS molecules on methane hydrate growth. It was observed that the hydrophobic tail part of the SDS molecule favorably interacts with the growing hydrate surface and may occupy the partial hydrate cages while the head groups remain exposed to water.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.8b02285}, author = {Choudhary, Nilesh and Hande, Vrushali R. and Roy, Sudip and Chakrabarty, Suman and Kumar, Rajnish} } @article {44464, title = {Electrochemically synthesized faceted CuInTe2 nanorods as an electron source for field emission applications}, journal = {New Journal of Chemistry}, volume = {42}, year = {2018}, month = {APR}, pages = {5284-5294}, abstract = {Herein, CuInTe2 (CIT) thin films with faceted nanorod-like morphology have been synthesized on a flexible molybdenum foil using a water-based low-cost electrodeposition technique. The co-deposition potential for CIT was optimized using cyclic voltammetry with respect to that of the Ag/AgCl reference electrode, and films were deposited from -0.6 V to -0.9 V at the working temperature of 75 degrees C. The as-prepared CIT films exhibited an amorphous nature, whereas the RTP-annealed films exhibited a highly crystalline chalcopyrite nature as a function of the growth potential. A red shift was observed in the Raman spectra of the as-deposited films that shifted towards the original position upon annealing. The Cu/In ratio obtained by the EDS analysis was found to decrease systematically upon increasing the growth potential. X-ray photoelectron spectroscopy (XPS) studies revealed the presence of Cu+, Cu2+ satellites, In3+, Te2-, and Te4+ states of Cu, In, and Te. The field emission study showed a maximum current density of 1.74 mA cm(-2), which was attainable at an applied electric field of 1.5 V mu m(-1). The turn-on field was found to be 0.92 V mu m(-1), comparable to that of the carbon nanofibres. The emitter exhibited stable electron emission over a period of 3 hours. The faceted CIT nanorods with columnar growth are a potential candidate for application as an electron source, and herein, the field emission of CIT nanorods is reported for the first time.}, doi = {10.1039/c7nj04773h}, author = {Lakhe, Manorama G. and Joshi, Padmshree and Choudhary, Ram J. and Ganesan, V. and Joag, Dilip S. and Chaure, Nandu B.} } @article {45419, title = { Enhanced selectivity of 3-D ordered macroporous Pt/Al2O3 catalysts in nitrites removal from water}, journal = {Applied Catalysis A-General}, volume = {564}, year = {2018}, month = {AUG}, pages = {26-32}, type = {Article}, abstract = {Tailored macroporous mesoporous alumina supports have been successfully prepared using a single hard templating approach. Pt nanoparticles, showing similar physico-chemical properties, were homogeneously dispersed throughout the different alumina frameworks as catalytic active phase for drinking water treatment. We demonstrated that careful modification of pore properties of the catalyst (size and connectivity) by pseudomorphic transformation can strongly modulate the reaction rate and selectivity through the limited access to Pt active sites within the alumina porous particles. Specifically, 3-D Ordered Macroporous Pt-Al2O3 catalysts with a high degree of interconnectivity yield to superior catalytic properties (enhanced activity and selectivity) over pure mesoporous counterparts in the hydrogenation of nitrites in water. We found that large pores (240 nm) interconnected with windows (110 nm) alleviate mass transfer limitations and clearly improve NZ selectivity. The findings of this study further suggest the possibility of engineering the pore architecture of the support to fine tune the selectivity for a particular reaction rather than investigating more on tuning the properties of the costly active metallic phase.}, doi = {10.1016/j.apcata.2018.07.014}, author = {Sekhar, A. C. Sunil and Zaki, A. and Troncea, S. and Casale, S. and Vinod, C. P. and Dacquin, J. P. and Granger, P.} } @article {45410, title = { Excited-state prototropism of 7-hydroxy-4-methylcoumarin in [C(n)mim][BF4] series of ionic liquid-water mixtures: insights on reverse micelle-like water nanocluster formation}, journal = {Photochemical \& Photobiological Sciences}, volume = {17}, year = {2018}, month = {SEP}, pages = {1256-1266}, type = {Article}, abstract = {This study explores the excited state prototropic behavior of the fluorophore, 7-hydroxy-4-methylcoumarin (7H4MC), in the [C(n)mim][BF4] (n = 2, 4, 6, 8, 10) series of ionic liquid (IL)-water mixtures at low water contents. In pure IL media, 7H4MC exists in the neutral form in both ground and excited states. However, on addition of water to the ILs, the excited neutral form of the dye is gradually converted to the anionic and the tautomeric species, leading to characteristic changes in the emission spectra. The similarity in the spectral features of 7H4MC in the IL-water system with that in a conventional reverse micelle system rather than with organic solvent-water mixtures, suggests that in the presence of water, the ILs are organized into reverse micelle-like structures with the consequent formation of confined water pockets. The results further suggest that formation of water nanoclusters and the ensuing changes in excited state prototropic behavior of the dye, is facilitated by increase in the alkyl chain length of the IL cation. These propositions are supported by time-resolved fluorescence studies. To the best of our knowledge this is the first report on proton transfer reaction in IL-water mixtures at low water contents. Considering that ILs are useful as solvents and surfactants, and IL-water mixtures in particular have applications in chemical extractions and biocatalysis, an understanding of the structural organization and water pool formation in these systems is quite important. The insights obtained from the prototropic transformations of 7H4MC are significant not only for fundamental self-assembly studies, but also for the development of ILs as chemical reaction media.}, doi = {10.1039/c8pp00132d}, author = {Beniwal, Vijay and Kumar, Anil and Pal, Haridas and Choudhury, Sharmistha Dutta} } @article {45405, title = {Experimental and theoretical investigations of different diketopyrrolopyrrole-based polymers}, journal = {ACS Omega}, volume = {3}, year = {2018}, month = {SEP}, pages = {11710-11717}, type = {Article}, abstract = {Diketopyrrolopyrrole (DPP)-based polymers are often considered las the most promising donor moiety in traditional bulk heterojunction solar cell devices. In this paper, we report the synthesis, characterization of various DPP-based copolymers with different molecular weights, l and polydisper sity where other aromatic repeating units (phenyl or thiophene based) are connected by alternate double bonds or triple bonds. Some of the copolymers were used for device fabrication and the crucial parameters such as fill factor (FF) and open circuit voltage (V-oc) were calculated. The density functional theory was used to optimize the geometries and deduce highest occupied molecular orbital lowest unoccupied molecular orbital gaps of all the polymers and{\textquoteright}theoretically predict their optical and electronic properties. Optical properties of all the polymers, electrochemical properties and band gaps were also obtained experimentally and compared with the theoretically predicted values.}, doi = {10.1021/acsomega.8b01132}, author = {Murugan, Pachaiyappan and Raghavendra, Venkatraman. and Chithiravel, Sundaresan and Krishnamoorthy, Kothandam and Mandal, Asit Baran and Subramanian, Venkatesan and Samanta, Debasis} } @article {44474, title = {Exploring GPCR lipid interactions by molecular dynamics simulations: excitements, challenges, and the way forward}, journal = {Journal of Physical Chemistry B}, volume = {122}, year = {2018}, month = {JUN}, pages = {5727-5737}, abstract = {Gprotein-coupled receptors (GPCRs) are seven transmembrane receptors that mediate a large number of cellular responses and are important drug targets. One of the current challenges in GPCR biology is to analyze the molecular signatures of receptor-lipid interactions and their subsequent effects on GPCR structure, organization, and function. Molecular dynamics simulation studies have been successful in predicting molecular determinants of receptor-lipid interactions. In particular, predicted cholesterol interaction sites appear to correspond well with experimentally determined binding sites and estimated time scales of association. In spite of several success stories, the methodologies in molecular dynamics simulations are still emerging. In this Feature Article, we provide a comprehensive overview of coarse-grain and atomistic molecular dynamics simulations of GPCR-lipid interaction in the context of experimental observations. In addition, we discuss the effect of secondary and tertiary structural constraints in coarse-grain simulations in the context of functional dynamics and structural plasticity of GPCRs. We envision that this comprehensive overview will help resolve differences in computational studies and provide a way forward.}, doi = {10.1021/acs.jpcb.8b01657}, author = {Sengupta, Durba and Prasanna, Xavier and Mohole, Madhura and Chattopadhyay, Amitabha} } @article {44487, title = {Gold(I)-catalyzed cross-coupling reactions of aryldiazonium salts with organostannanes}, journal = {Organic \& Biomolecular Chemistry}, volume = {16}, year = {2018}, month = {APR}, pages = {2865-2869}, type = {Article}, abstract = {

Gold(I)-catalyzed cross-coupling reactions of aryldiazonium salts with organostannanes are described. This redox neutral strategy offers an efficient approach to diverse biaryls, vinyl arenes and arylacetylenes. Monitoring the reaction with NMR and ESI-MS provided strong evidence for the in situ formation of Ph3PAuIR (R = aryl, vinyl and alkynyl) species which is crucial for the activation of aryldiazonium salts.

}, doi = {10.1039/C8OB00630J}, author = {Akram, Manjur O. and Shinde, Popat S. and Chintawar, Chetan C. and Patil, Nitin T.} } @article {44489, title = {G-quadruplex motif at the 3{\textquoteright} end of sgRNAs improves CRISPR-Cas9 based genome editing efficiency}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {MAR}, pages = {2377-2380}, abstract = {Originating as a component of prokaryotic adaptive immunity, the type II CRISPR/Cas9 system has been repurposed for targeted genome editing in various organisms. Although Cas9 can bind and cleave DNA efficiently under in vitro conditions, its activity inside a cell can vary dramatically between targets owing to differences between genomic loci and availability of enough Cas9/sgRNA (single guide RNA) complex molecules for cleavage. Most methods to improve CRISPR/Cas9 activity have so far relied on Cas9 protein engineering or base modifications in the sgRNA sequence. Here we demonstrate that a structure based rational design of sgRNAs can enhance the efficiency of Cas9 cleavage in vivo. By appending a naturally forming RNA G-quadruplex motif to the 3' end of sgRNAs we can improve its stability and target cleavage efficiency in zebrafish embryos without inducing off-target activity, thereby underscoring its value in the design of better and optimized genome editing triggers.}, issn = {1359-7345}, doi = {10.1039/C7CC08893K}, author = {Nahar, Smita and Sehgal, Paras and Azhar, Mohammad and Rai, Manish and Singh, Amrita and Sivasubbu, Sridhar and Chakraborty, Debojyoti and Maiti, Souvik} } @article {44493, title = {High and reversible lithium ion storage in self-exfoliated triazole-triformyl phloroglucinol-basedcovalent organic nanosheets}, journal = {Advanced Energy Materials}, volume = {8}, year = {2018}, month = {MAR}, pages = {Article Number: 1702170}, abstract = {Covalent organic framework (COF) can grow into self-exfoliated nanosheets. Their graphene/graphite resembling microtexture and nanostructure suits electrochemical applications. Here, covalent organic nanosheets (CON) with nanopores lined with triazole and phloroglucinol units, neither of which binds lithium strongly, and its potential as an anode in Li-ion battery are presented. Their fibrous texture enables facile amalgamation as a coin-cell anode, which exhibits exceptionally high specific capacity of approximate to 720 mA h g(-1) (@100 mA g(-1)). Its capacity is retained even after 1000 cycles. Increasing the current density from 100 mA g(-1) to 1 A g(-1) causes the specific capacity to drop only by 20\%, which is the lowest among all high-performing anodic COFs. The majority of the lithium insertion follows an ultrafast diffusion-controlled intercalation (diffusion coefficient, D-Li(+) = 5.48 x 10(-11) cm(2) s(-1)). The absence of strong Li-framework bonds in the density functional theory (DFT) optimized structure supports this reversible intercalation. The discrete monomer of the CON shows a specific capacity of only 140 mA h g(-1) @50 mA g(-1) and no sign of lithium intercalation reveals the crucial role played by the polymeric structure of the CON in this intercalation-assisted conductivity. The potentials mapped using DFT suggest a substantial electronic driving-force for the lithium intercalation. The findings underscore the potential of the designer CON as anode material for Li-ion batteries.}, doi = {10.1002/aenm.201702170}, author = {Haldar, Sattwick and Roy, Kingshuk and Nandi, Shyamapada and Chakraborty, Debanjan and Puthusseri, Dhanya and Gawli, Yogesh and Ogale, Satishchandra and Vaidhyanathan, Ramanathan} } @article {45517, title = {Highly efficient field emission properties of radially aligned carbon nanotubes}, journal = {Journal of Materials Chemistry C}, volume = {6}, year = {2018}, month = {MAY}, pages = {6584-6590}, type = {Article}, abstract = {Here, we report extraordinary field emission properties from one pot synthesized aligned carbon nanotubes endowed with related Fe nanoparticles (NPs). The CNT configuration is in the form of a carbon hollow cylinder (CHC) with CNTs radially aligned towards the CHC axis. The structure generates electron field emission properties such as an ultralow turn on field (0.35 V μm-1 at 10 μA cm-2), a low threshold field (0.41 V μm-1 at 100 μA cm-2) and a high field emission current density (7.71 mA cm-2 at 0.78 V μm-1). It also exhibits multi-fold improvement in the field enhancement factor (1.34 {\texttimes} 104) with highly stable current emission at 100 μA measured for 14 h. No post synthesis treatment is required for enhanced field emission characteristics. The growth related Fe NPs assist in lowering the work function and hence enhancing the field emission properties. The possibility of assembling nano-structured field emitters into macroscale architectures suggests new prospects for next generation three dimensional electron sources.}, doi = {10.1039/c8tc00814k}, author = {Tripathi, P. and Gupta, B.K. and Bhatnagar, A and Patel, C.R.P and Banker, P.K. and Late, D.J. and More, M.A. and Lalla, N.P. and Phase, D.M., and Choudhary, R.J. and Shaz, M.A. and Ajayan, P.M. and Srivastava, O.N.} } @article {45385, title = {Highly stable COF-supported Co/Co(OH)(2) nanoparticles heterogeneous catalyst for reduction of nitrile/nitro compounds under mild conditions}, journal = {Small}, volume = {14}, year = {2018}, month = {SEP}, type = {Article}, abstract = {Ordered nanoporosity in covalent organic framework (COF) offers excellent opportunity for property development. Loading nanoparticles (nPs) onto them is one approach to introducing tailor-made properties into a COF. Here, a COF-Co/Co(OH)(2) composite containing about 16 wt\% of <6 nm sized Co/Co(OH)(2) nPs is prepared on a N-rich COF support that catalyzes the release of theoretical equivalence of H-2 from readily available, safe, and cheap NaBH4. Furthermore, the released H-2 is utilized for the hydrogenation of nitrile and nitro compounds to amines under ambient conditions in a facile one-pot reaction. The COF "by choice" is built from "methoxy" functionalized dialdehydes which is crucial in enabling the complete retention of the COF structure under the conditions of the catalysis, where the regular Schiff bonds would have hydrolyzed. The N-rich binding pockets in the COF ensure strong nP-COF interactions, which provides stability and enables catalyst recycling. Modeling studies reveal the crucial role played by the COF in exposing the active facets and thereby in controlling the activation of the reducing agent. Additionally, via density functional theory, we provide a rational explanation for how these COFs can stabilize nanoparticles which grow beyond the limiting pore size of the COF and yet result in a truly stable heterogeneous catalyst - a ubiquitous observation. The study underscores the versatility of COF as a heterogeneous support for developing cheap and highly active nonnoble metal catalysts.}, doi = {10.1002/smll.201801233}, author = {Mullangi, Dinesh and Chakraborty, Debanjan and Pradeep, Anu and Koshti, Vijay and Vinod, Chathakudath P. and Panja, Soumendranath and Nair, Sunil and Vaidhyanathan, Ramanathan} } @article {45457, title = {Hydrogen bonding assissted supramolecular metal catalysis}, journal = {Chemistry - an Asian Journal }, volume = {13}, year = {2018}, month = {DEC}, pages = {3623-3646}, type = {Article }, abstract = {The process of catalyst screening and discovery still largely relies on traditional ligand-design approaches, which suffer from complex synthetic requirements and offer limited structural diversity. On the contrary, supramolecular chemistry offers the potential to harness multiple weak secondary interactions to deliver self-assembled catalysts with diverse structures or to orient substrates to achieve enzyme-like activity and selectivity. Herein, the application of hydrogen-bonding (H-bonding) interactions as a construction element and directing group in "supramolecular transition-metal catalysis" is critically reviewed and the current state-of-the-art in the field is presented. H-bonding interactions empower structurally simple ligands to deliver complex self-assembled catalysts, which have been found to catalyze a gamut of organic transformations, including hydroformylation, hydrogenation, and allylation reactions. As we will discuss, on many occasions, these supramolecular catalysts outperform their analogous covalently linked catalytic systems. The potential of H-bonding interactions as directing groups has recently been recognized by the scientific community and this Focus Review presents the role of hydrogen-bonding interactions in directing substrates to obtain excellent selectivities and activities in a range of catalytic transformations}, issn = { 1861-4728}, doi = { 10.1002/asia.201801302}, author = {Mote, Nilesh R. and Chikkali, Samir H.} } @article {45427, title = {Hydrogen-bonding-assisted supramolecular metal catalysis}, journal = {Chemistry-An Asian Journal}, volume = {13}, year = {2018}, month = {DEC}, pages = {3623-3646}, type = {Article}, abstract = {The process of catalyst screening and discovery still largely relies on traditional ligand-design approaches, which suffer from complex synthetic requirements and offer limited structural diversity. On the contrary, supramolecular chemistry offers the potential to harness multiple weak secondary interactions to deliver self-assembled catalysts with diverse structures or to orient substrates to achieve enzyme-like activity and selectivity. Herein, the application of hydrogen-bonding (H-bonding) interactions as a construction element and directing group in "supramolecular transition-metal catalysis" is critically reviewed and the current state-of-the-art in the field is presented. H-bonding interactions empower structurally simple ligands to deliver complex self-assembled catalysts, which have been found to catalyze a gamut of organic transformations, including hydroformylation, hydrogenation, and allylation reactions. As we will discuss, on many occasions, these supramolecular catalysts outperform their analogous covalently linked catalytic systems. The potential of H-bonding interactions as directing groups has recently been recognized by the scientific community and this Focus Review presents the role of hydrogen-bonding interactions in directing substrates to obtain excellent selectivities and activities in a range of catalytic transformations.}, issn = {1861-4728 }, doi = {10.1002/asia.201801302}, author = {Mote, Nilesh R. and Chikkali, Samir H.} } @article {44356, title = {Hydrothermal synthesis of rGO-PbBi2Se4 composite and investigation of its structural, chemical and field emission properties}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {29}, year = {2018}, month = {JUN}, pages = {10494-10503}, type = {Article}, abstract = {In the present study we report the one step facile synthesis of pristine lead bismuth selenide (PbBi2Se4) and reduced graphene oxide (rGO) and its composites with PbBi2Se4. Formation of pristine PbBi2Se4 and rGO-PbBi2Se4 composite were confirmed by X-ray diffraction and X-ray photoelectron spectroscopy. The surface morphology and topography investigated by using scanning electron microscopy and transmission electron microscopy revealed the formation of nano-flowers pristine PbBi2Se4. After coupling pristine PbBi2Se4 with rGO the surface morphology shows the formation of sharp vertically protruded nano-sheets/nano-flaks originated from the nano-flowers. Finally, the field emission properties of pristine PbBi2Se4 and rGO-PbBi2Se4 composite have been investigated. It has been observed that the rGO-PbBi2Se4 composite emitter exhibited excellent field emission properties with low turn-on field (similar to 2.8 V/A mu m for 10 A mu A/cm(2)), high emission current density (similar to 1288 A mu A/cm(2) at 3.9 V/A mu m) and superior current stability (similar to 4.5 h for similar to 1 A mu A) compare to pristine PbBi2Se4 emitter. Thus, the facile one step synthesis approach and robust nature of rGO-PbBi2Se4 composite emitter can provide prospects for the future development of large-area emitter applications such as flat-panel-display and vacuum micro/nanoelectronics devices.}, doi = {10.1007/s10854-018-9114-0}, author = {Aher, Rahul and Bhorde, Ajinkya and Sharma, Priyanka and Nair, Shruthi and Borate, Haribhau and Pandharkar, Subhash and Rondiya, Sachin and Chaudhary, Minakshi and Gopinath, Chinnakonda and Suryawanshi, Sachin and More, Mahendra and Jadkar, Sandesh} } @article {44184, title = {Imido-P(V) trianion supported enantiopure neutral tetrahedral Pd(II) cages}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {FEB}, pages = {1873-1876}, type = {Article}, abstract = {

Charge-neutral chiral hosts are attractive due to their ability to recognize a wide range of guest functionalities and support enantio-selective processes. However, reports on such charge-neutral cages are very scarce in the literature. Here, we report an enantiomeric pair of tetrahedral Pd(II) cages built from chiral tris(imido) phosphate trianions and oxalate linkers, which exhibit enantioselective separation capabilities for epichlorohydrin, beta-butyrolactone, and 3-methyl- and 3-ethyl cyclopentanone.

}, issn = {1359-7345}, doi = {10.1039/c8cc00207j}, author = {Rajasekar, Prabhakaran and Pandey, Swechchha and Paithankar, Harshad and Chugh, Jeetender and Steiner, Alexander and Boomishankar, Ramamoorthy} } @article {44641, title = {Improved nonenzymatic glucose sensing properties of Pd/MnO2 nanosheets: synthesis by facile microwave-assisted route and theoretical insight from quantum simulations}, journal = {Journal of Physical Chemistry B}, volume = {122}, year = {2018}, month = {AUG}, pages = {7636-7646}, abstract = {

The electrocatalytic properties of manganese oxide (MnO2) can be improved significantly by making hybrids/composites with noble metals (Au, Pd). Here, efforts have been made to synthesize the MnO2/Au and MnO2/Pd nanocomposites by a facile, rapid microwave irradiation method. The products characterized by X-ray diffraction and transmission electron microscopy exhibited their tetragonal phase and nanosheet morphology. The efficiency of the prepared composite materials as glucose sensor was tested by cyclic voltammetry and chronoamperometry measurements, and the results are discussed. The study revealed that successful modification of MnO2 by Pd led to excellent sensing performance by the reduction of size and the synergistic effect between MnO2 and PdO, which expedites the electron transfer. Besides, the wide detection range, good selectivity, and stability demonstrate its robustness in the design of electrochemical sensor platform. To get theoretical insight into the excellent sensing performance of MnO2/Pd, we have performed detailed density functional theory simulations to explore the charge transfer and bonding mechanism of glucose on MnO2 and Pd/Au-doped MnO2 surface. Pd is bonded strongly on MnO2 and makes MnO2/Pd more conducting due to the enhancement of density of states near Fermi level. The higher binding energy of glucose and enhanced charge transfer from glucose to Pd-doped MnO2 compared to bare MnO2 infer that Pd-doped MnO2 possess superior charge-transfer kinetics, resulting in higher glucose sensing performance, which supports our experimental observations.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.8b01611}, author = {Ponnusamy, Rajeswari and Gangan, Abhijeet and Chakraborty, Brahmananda and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {44635, title = {In situ nanoparticle embedding for authentication of epoxy composites}, journal = {Advanced Materials}, volume = {30}, year = {2018}, month = {AUG}, pages = {1801523}, abstract = {

In situ reduction of chloroauric acid inside an amine-cured epoxy matrix leads to formation of gold nanoparticles which are embedded inside the part. This phenomenon is leveraged to design an authentication system for composites wherein the particles are embedded spatially and are invisible to the naked eye. Under UV light, the particles diffract light and create an easily visible path. The particles penetrate inside the part and create a permanent, cost-effective, tamper-proof code. The advantage of this technique is that this authentication system can be built in composite parts after fabrication of the composite structure. As very small amount (nanograms) of particles are present in the part, negligible change in the thermal characteristics of the parent matrix is observed. The particles can be embedded easily in carbon fiber as well as glass fiber reinforced epoxy structures.

}, keywords = {authentication, barcoding, composites, embedded nanoparticles, Epoxy}, issn = {0935-9648}, doi = {10.1002/adma.201801523}, author = {Pansare, Amol V. and Khairkar, Shyam R. and Shedge, Amol A. and Chhatre, Shraddha Y. and Patil, Vishwanath R. and Nagarkar, Amit A.} } @article {44234, title = {In situ synthesis of nitrogen- and sulfur-enriched hierarchical porous carbon for high-performance supercapacitor}, journal = {Energy \& Fuels}, volume = {32}, year = {2018}, month = {JAN}, pages = {908-915}, type = {Article}, abstract = {

In this work, we present a simple and facile method for the nitrogen (N)- and sulfur (S)- doped porous three-dimensional (3D) spongelike carbon materials via direct pyrolysis of N and S containing polymer N,N{\textquoteright}-methylene-bis-acrylamide cross-linked poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) at varying temperatures under inert atmosphere. The obtained nitrogen- and sulfur-doped porous carbons (NSPCs) possess 3D hierarchical porous structure and contain a significantly high amount of N and S species. The concurrent incorporation of N and S successfully modified the surface properties of carbon materials and lead to enhanced capacitive performance. The presented NSPC exhibits specific capacitance of 230 F g(-1) at a current density of 1 A g(-1) and showed excellent cycling stability, depicting a promising material for energy storage devices.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.7b02305}, author = {Mehare, Rupali S. and Ranganath, Suresha P. and Chaturvedi, Vikash and Badiger, Manohar. V. and Shelke, Manjusha V.} } @article {45411, title = {In vivo examination of folic acid-conjugated gold-silica nanohybrids as contrast agents for localized tumor diagnosis and biodistribution}, journal = {Bioconjugate Chemistry}, volume = { 29}, year = {2018}, pages = {4012-4019}, type = {DEC}, abstract = {Enhanced biocompatibility of nanosized contrast agent with high radiodensity and specific biodistribution is an important parameter for localized tumor imaging and organ safety. Various nanoparticles, especially gold nanorods (GNRs), have been applied for tumor diagnosis. However, their toxicity, nonspecific biodistribution, and easy aggregation are critical issues in cancer medicine. To avoid these issues, encapsulation of the GNRs in the core of nanoscopic mesoporous silica (MS) under ambient conditions, yielding multifunctional nanomaterials for cancer nanomedicine, is a recent and active development. Interestingly, GNR embedded MS nanohybrid (GNR-MS), though a promising material in nanomedicine, is rarely examined for tumor diagnosis, in vivo toxicity, organ safety, contrast ability, and excretion. Herein, we report a systematic in vivo examination of folic acid functionalized GNR-MS (GNR-MS-FA) for localized 4T1 breast tumor diagnosis, organ safety, and excretion using a one-time dose administration. The nanomaterials show good aqueous dispersibility, biocompatibility, high radiodensity, and tumor specific targeting ability (in vitro as well as in vivo). The in vivo tumor diagnosis and specific biodistribution of injected nanomaterials clearly demonstrates their potential for the visualization of tumors deep in the body of mice. In addition, all organs including the healthy glomerulus of the kidney are observed to be free of tissue injuries thereby indicating the superior biocompatibility of the nanomaterials.}, issn = {1043-1802}, doi = {10.1021/acs.bioconjchem.8b00522}, author = {Prasad, Rajendra and Agawane, Sachin B. and Chauhan, Deepak S. and Srivastava, Rohit and Selvaraj, Kaliaperumal} } @article {44504, title = {Influence of silver nanoparticles morphologies on density, viscosity and thermal conductivity of silver nanofluids and silver ionanofluids}, journal = {Journal of Nanofluids}, volume = {7}, year = {2018}, month = {APR}, pages = {246-257}, abstract = {This paper explores the consequence of silver nanoparticles morphology (nanowires, nanoplates, and nanospheres) on density, viscosity and thermal conductivity of nanofluids and IoNanoFluids. Nuclear magnetic resonance spectroscopy results reveal that hydroxyl group in cation relates to silver nanoparticle surface of silver IoNanoFluid. Effect on bonding of silver nanoparticles after solvation in an ionic liquid was investigated with Infrared spectroscopy. UV-Visible spectroscopy analysis observed variations in color and optical properties of silver IoNanoFluids compared with nanofluids. Structural and morphological characterization of silver nanofluids and silver IoNanoFluids were carried out with Scanning electron microscopy and Transmission electron microscopy techniques. The presence of silver nanoparticles from the aqueous phase of nanofluids to viscous ionic liquid phase was confirmed by X-ray photoelectron spectroscopy and Energy dispersive analysis. The thermal stability study unveils that Choline bis(trifluromethylsulfonyl)imide ionic liquid, and its derived silver IoNanoFluids, are more stable than silver nanofluids. There was no considerable impact was observed for the silver nanoparticles morphology on the density of IoNanofluids. Moreover, two-dimensional silver structures raise the viscosity further compare to other two morphologies of silver nanoparticles in a base ionic liquid. Among all three studied morphologies, silver nanowires influence additional in the enhancement of thermal conductivity for silver nanofluids and IoNanoFluids. Enhanced thermal conductivity and reduced viscosity of silver nanowires based IoNanoFluid sorts this fluid as a potential heat transfer fluid.}, doi = {10.1166/jon.2018.1451}, author = {Patil, Virendra Sudam and Andry, Cera-Manjarres and Salavera, Daniel and Rode, Chandrashekhar Vasant and Patil, Kashinath R and Coronas, Alberto} } @article {44383, title = { Investigations on optical properties of ZnO decorated graphene oxide (ZnO@GO) and reduced graphene oxide (ZnO@r-GO)}, journal = {Journal of Alloys and Compounds}, volume = {744}, year = {2018}, month = {MAY}, pages = {64-74}, abstract = {The present investigation is based on the production of reduced graphene oxide (r-GO) from the graphene oxide using Hummer{\textquoteright}s (GO) and improved Hummer{\textquoteright}s methods (IGO) at elaborated conditions, named as GO and IGO, respectively hereafter. In contrast to previously known techniques, the presented process does not generate toxic gas. Meanwhile, the reduction temperature can be easily controlled. This approach provides a more significant amount of hydrophilic oxidized graphene as compared to GO and IGO with the use of additional KMnO4. Thus synthesized IGO was used to produce r-GO by thermal treatment. The morphological characteristics show that the obtained samples have a wrinkled paper-like morphology with severely folded lines. However, r-GO has double layers and multilayer at the edges. All the products (GO, IGO, and r-GO) have been decorated with ZnO nanoparticles (NPs). The XRD patterns of ZnO@GO composites have confirmed the characteristic peaks of wurtzite ZnO indicating the formation of ZnO nanoparticles onto the surface of graphene. The microscopic studies confirm the random growth/decoration of ZnO NPs on the surface of GO/IGO/r-GO sheets. However, in IGO and r-GO, loading/growth of ZnO NPs are less as compared to ZnO@GO. Overall structural studies indicate the oxidation of graphite and reduction of graphene oxide into r-GO sheets and ZnO decoration. Upon UV excitations, a bright blue emission has been exhibited by the GO that originates from geminate recombination of localized e-h pairs in sp(2) clusters those primarily act as the luminescent centers. The noteworthy enhancement in the emission intensities after the incorporation of ZnO nanoparticles on the surface of GO is observed. The improved synthesis method and low-temperature reduction technique of GO may be essential for the large-scale production of r-GO as well as the construction of devices composed of ZnO@GO/IGO/r-GO. (C) 2018 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jallcom.2018.02.057}, author = {Kumar, Pushpendra and Som, Sudipta and Pandey, Mukesh K. and Das, Subrata and Chanda, Anupama and Singh, Jai} } @article {44511, title = {Iron Catalyzed Hydroformylation of Alkenes under Mild Conditions: Evidence of an Fe(II) Catalyzed Process}, journal = {Journal of the American Chemical Society}, volume = {140}, year = {2018}, month = {MAR }, pages = {4430-4439}, abstract = {

Earth abundant, first row transition metals offer a cheap and sustainable alternative to the rare and precious metals. However, utilization of first row metals in catalysis requires harsh reaction conditions, suffers from limited activity, and fails to tolerate functional groups. Reported here is a highly efficient iron catalyzed hydroformylation of alkenes under mild conditions. This protocol operates at 10-30 bar syngas pressure below 100 degrees C, utilizes readily available ligands, and applies to an array of olefins. Thus, the iron precursor [HFe(CO)(4)](-)[Ph3PNPPh3](+) (1) in the presence of triphenyl phosphine catalyzes the hydroformylation of 1-hexene (S2), 1-octene (S1), 1-decene (S3), 1-dodecene (S4), 1-octadecene (S5), trimethoxy(vinyl)silane (S6), trimethyl(vinyl)silane (S7), cardanol (S8), 2,3-dihydrofuran (S9), allyl malonic acid (S10), styrene (S11), 4-methylstyrene (S12), 4-iBu-styrene (S13), 4-tBu-styrene (S14), 4-methoxy styrene (S15), 4-acetoxy styrene (S16), 4-bromo styrene (S17), 4-chloro styrene (S18), 4-vinylbenzonitrile (S19), 4-vinylbenzoic acid (S20), and allyl benzene (S21) to corresponding aldehydes in good to excellent yields. Both electron donating and electron withdrawing substituents could be tolerated and excellent conversions were obtained for S11-S20. Remarkably, the addition of 1 mol \% acetic acid promotes the reaction to completion within 16-24 h. Detailed mechanistic investigations revealed in situ formation of an iron-dihydride complex [H2Fe(CO)(2)(PPh3)(2)] (A) as an active catalytic species. This finding was further supported by cyclic voltammetry investigations and intermediacy of an Fe(0)-Fe(II) species was established. Combined experimental and computational investigations support the existence of an iron-dihydride as the catalyst resting state, which then follows a Fe(II) based catalytic cycle to produce aldehyde.

}, issn = {0002-7863}, doi = {10.1021/jacs.8b01286}, author = {Pandey, Swechchha and Raj, K. Vipin and Shinde, Dinesh R. and Vanka, Kumar and Kashyap, Varchaswal and Kurungot, Sreekumar and Vinod, C. P. and Chikkali, Samir H.} } @article {44589, title = {Judicious reduction of supported Ti catalyst enables access to disentangled ultrahigh molecular weight polyethylene}, journal = {Macromolecules}, volume = {51}, year = {2018}, month = {JUN }, pages = {4541-4552}, abstract = {

Heterogeneous Ziegler-Natta and homogeneous metallocene catalysts are known to produce ultrahigh molecular weight polyethylene (UHMWPE) in the entangled state. On the other hand, only (two) homogeneous single-site catalysts are reported to yield disentangled UHMWPE (dis-UHMWPE). This disparity between the two types of catalysts and the two states of polyethylene can be bridged if a heterogeneous single-site catalyst that can yield dis-UHMWPE is made accessible. Here, one-pot two-step synthesis of a MgCl2 supported [Ti(OEt)(4)] derived catalyst 1 with a two-stage activation strategy is reported to produce dis-UHMWPE. Second activation of catalyst 1 was performed by adding excess modified methylaluminoxane (MMAO12), and XPS analysis indicated that the catalyst existed in only Ti(III) state at [A1]/[Ti] ratio of 600. Catalyst 1 after second activation with MMAO12 was found to be highly active in ethylene polymerization and produced dis-UHMWPE. Polymerization conditions were tailored to obtain molecular weight (M-w) as high as 13 million g/mol PE. To the best of our knowledge, this is the first time a heterogeneous catalyst (catalyst 1) that displays pseudosingle site nature is able to produce dis-UHMWPE. The thus-prepared nascent polyethylene revealed a melting temperature of 141-144 degrees C, which is a characteristic melting transition for a dis-UHMVVPE. The disentangled state of the nascent PE and its M-w and MVVD were further authenticated by rheological investigations. Isothermal time, sweep oscillatory experiments in linear viscoelastic limit revealed a rapid rise in elastic modulus followed by equilibration to plateau modulus, which are characteristic features of the disentangled state. Thus, a pseudo-singlesite heterogeneous catalyst has been accessed, which upon second activation with excess MMAO12 led to the production of dis-UHMWPE.

}, issn = {0024-9297}, doi = {10.1021/acs.macromol.8b00590}, author = {Gote, Ravindra P. and Mandal, Dipa and Patel, Ketan and Chaudhuri, Krishnaroop and Vinod, C. P. and Lele, Ashish K. and Chikkali, Samir H.} } @article {45357, title = { Ligand-solvent compatibility: the unsung hero in the digestive ripening story}, journal = {Langmuir }, volume = {34}, year = {2018}, month = {NOV}, pages = {13680-13689}, type = {Article}, abstract = {

Digestive ripening (DR) is a process where a polydisperse nanocrystal (NC) system is converted into a monodisperse one with the aid of thermal heating of NCs in the presence of an excess surface-active organic ligand called digestive ripening agent (DRA) and a solvent. Here, we demonstrate that the solvent-DRA compatibility influences the final size and size distribution of the NCs in a significant manner. Accordingly, in this study, using the DR of gold NCs as the test case with alkanethiol (decanethiol/C10HT) and fluorinated thiol (1H,1H,2H,2H-perfluorodecanethiol/C10FT) as DRA{\textquoteright}s and toluene and alpha,alpha,alpha-trifluoro-toluene (TFT) and their combination as solvents, we clearly establish that alkanethiols result in best-quality NCs after DR in toluene while the fluorinated thiols provide reasonably monodispersed NCs in TFT. Our results also ascertain that even when DR is carried out in a mixture of solvents, as long as the compatible solvent is the major component, the DR process results in reasonably monodisperse NCs. As soon as the amount of uncompatible solvent exceeds a threshold limit, there is perceptible increase in the polydispersity of the NCs. We conclude that the polarity of the solvent, which affects the buildup of ligated atoms/clusters, plays a key role in controlling the size distributions of the NCs.

}, issn = { 0743-7463}, doi = {10.1021/acs.langmuir.8b02699}, author = {Shimpi, Jayesh R. and Chaudhari, Vijay Raman and Prasad, Bhagavatula L. V.} } @article {44521, title = {Membrane-induced organization and dynamics of the N-terminal domain of chemokine receptor CXCR1: insights from atomistic simulations}, journal = {Chemistry and Physics of Lipids}, volume = {210}, year = {2018}, month = {JAN}, pages = {142-148}, abstract = {

The CXC chemokine receptor 1 (CXCR1) is an important member of the G protein-coupled receptor (GPCR) family in which the extracellular N-terminal domain has been implicated in ligand binding and selectivity. The structure of this domain has not yet been elucidated due to its inherent dynamics, but experimental evidence points toward membrane-dependent organization and dynamics. To gain molecular insight into the interaction of the N-terminal domain with the membrane bilayer, we performed a series of microsecond time scale atomistic simulations of the N-terminal domain of CXCR1 in the presence and absence of POPC bilayers. Our results show that the peptide displays a high propensity to adopt a beta-sheet conformation in the presence of the membrane bilayer. The interaction of the peptide with the membrane bilayer was found to be transient in our simulations. Interestingly, a scrambled peptide, containing the same residues in a randomly varying sequence, did not exhibit membrane-modulated structural dynamics. These results suggest that sequence-dependent electrostatics, modulated by the membrane, could play an important role in folding of the N-terminal domain. We believe that our results reinforce the emerging paradigm that cellular membranes could be important modulators of function of G protein-coupled receptors such as CXCR1.

}, keywords = {All atom MD simulations, beta-sheet, CXCR1, Membrane interaction, N-terminal}, issn = {0009-3084}, doi = {10.1016/j.chemphyslip.2017.09.003}, author = {Kharche, Shalmali and Joshi, Manali and Sengupta, Durba and Chattopadhyay, Amitabha} } @article {44522, title = {Mesoporous shell@macroporous core aluminosilicates as sustainable nanocatalysts for direct N-alkylation of amines}, journal = {Chemnanomat}, volume = {4}, year = {2018}, month = {JUN}, pages = {537-541}, abstract = {

Aluminosilicate spheres with a macroporous core and mesoporous shell (Si/Al ratio of 11) is synthesised by a sol-gel method utilizing cetyltrimethyl ammonium bromide (CTAB) as a structure directing agent in basic medium. The selective incorporation of aluminium in the silica matrix results in the formation of aluminosilicates with an overall acidity of 0.32mmol/g with interconnected pores. Direct N-alkylation reaction is a prototype of C-N bond formation reaction and meso- macroporous aluminosilicate is shown to catalyze this reaction with excellent yield. The catalyst is tested and found sustainable for five catalytic cycles even without any high temperature regeneration step.

}, keywords = {Aluminosilicates, macroporous, Mesoporous, N-alkylation, nanocatalysis}, issn = {2199-692X}, doi = {10.1002/cnma.201800081}, author = {Sekhar, Anandakumari C. Sunil and Ashokkumar, Anumol Erumpukuthickal and Cygnet, Choorapoikayil T. and Lakshmi, Saseendranpillai Vidhya and Deepak, Francis Leonard and Vinod, Chathakudath P.} } @article {44334, title = {Mesoporous tin oxide: an efficient catalyst with versatile applications in acid and oxidation catalysis}, journal = {Catalysis Today}, volume = {309}, year = {2018}, month = {JUL}, pages = {61-76}, type = {Article}, abstract = {Mesoporous tin oxide was prepared by template assisted and template-free methods. As-prepared materials were calcined at various temperatures to generate different nature (Bronsted and Lewis), amount and strength of acidic sites. The physico-chemical properties of the catalysts were studied by XRD, N-2 sorption, pyridine-FTIR, NH3-TPD, DRS UV-vis, TGA, SEM, TEM, H-1 MAS and Sn-119 MAS NMR analyses. The catalytic behavior of mesoporous tin oxide catalysts was evaluated for acetalization and ketalization of glycerol with benzaldehyde and acetone respectively under solvent free conditions. The catalytic performance of mesoporous tin oxide was compared with that of other conventional solid acid catalysts namely H-ZSM-5, H-mordenite, H-beta, Al-MCM-41, Al-SBA-15 and Al-TUD-1. The efficiency of mesoporous tin oxide was also tested for cyclohexene epoxidation reaction. The catalyst prepared by template assisted method showed excellent catalytic performance compared to other catalysts due the difference in nature and amount of acidic sites in the catalyst. Meso-SnO2-T-350 was stable and reusable catalyst for four cycles without any appreciable loss in activity, and therefore it offers a good catalyst for potentially wide applications.}, doi = {10.1016/j.cattod.2017.10.009}, author = {Manjunathan, Pandian and Marakatti, Vijaykumar S. and Chandra, Prakash and Kulal, Atul B. and Umbarkar, Shubhangi B. and Ravishankar, Raman and Shanbhag, Ganapati V.} } @article {44524, title = {Metal-free annulation of β-acylamino ketones: facile access to spirooxazolines and oxazolines via oxidative C{\textendash}O bond formation}, journal = {Organic Chemistry Frontiers }, volume = {5}, year = {2018}, month = {OCT}, pages = {544-548 }, abstract = {A metal-free annulation reaction of β-acylamino ketone derivatives has been reported for the synthesis of a group of functionalized spirooxazolines and oxazolines in good to excellent yields. The reaction proceeds via phenyliodine(III) diacetate (PIDA)-mediated oxidative C{\textendash}O bond formation in the presence of BF3{\textendash}OEt2. The mild reaction conditions, broad substrate scope, simple execution and synthetic potential of the products make this novel protocol very attractive.}, doi = {10.1039/C7QO00783C}, author = {Chavan, Santosh S. and Rupanawar, Bapurao D. and Kamble, Rohit B. and Shelke, Anil M. and Gurunath Suryavanshi} } @article {44594, title = {MiRNA160 is associated with local defense and systemic acquired resistance against Phytophthora infestans infection in potato}, journal = {Journal of Experimental Botany}, volume = {69}, year = {2018}, month = {APR }, pages = {2023-2036}, abstract = {

To combat pathogen infection, plants employ local defenses in infected sites and elicit systemic acquired resistance (SAR) in distant tissues. MicroRNAs have been shown to play a significant role in local defense, but their association with SAR is unknown. In addition, no such studies of the interaction between potato and Phytophthora infestans have been reported. We investigated the role of miR160 in local and SAR responses to P. infestans infection in potato. Expression analysis revealed induced levels of miR160 in both local and systemic leaves of infected wild-type plants. miR160 overexpression and knockdown plants exhibited increased susceptibility to infection, suggesting that miR160 levels equivalent to those of wild-type plants may be necessary for mounting local defense responses. Additionally, miR160 knockdown lines failed to elicit SAR, and grafting assays indicated that miR160 is required in both local and systemic leaves to trigger SAR. Consistently, SAR-associated signals and genes were dysregulated in miR160 knockdown lines. Furthermore, analysis of the expression of defense and auxin pathway genes and direct regulation of StGH3.6, a mediator of salicylic acid-auxin cross-talk, by the miR160 target StARF10 revealed the involvement of miR160 in antagonistic cross-talk between salicylic acid-mediated defense and auxin-mediated growth pathways. Overall, our study demonstrates that miR160 plays a crucial role in local defense and SAR responses during the interaction between potato and P. infestans.

}, keywords = {Auxin-salicylic acid antagonism, microRNA, miR160, Phytophthora infestans, Solanum chacoense, Solanum tuberosum, systemic acquired resistance}, issn = {0022-0957}, doi = {10.1093/jxb/ery025}, author = {Natarajan, Bhavani and Kalsi, Harpreet S. and Godbole, Prajakta and Malankar, Nilam and Thiagarayaselvam, Aarthy and Siddappa, Sundaresha and Thulasiram, Hirekodathakallu V. and Chakrabarti, Swarup K. and Banerjee, Anjan K.} } @article {44587, title = {Modern trends in inorganic chemistry: celebration of inorganic chemistry in India}, journal = {Journal of Chemical Sciences}, volume = {130}, year = {2018}, month = {JUL}, pages = {Article Number: UNSP 75}, doi = {10.1007/s12039-018-1499-z}, author = {Chikkali, Samir H. and Anand, Venkataramanarao G. and Srinivas, Darbha and Kumbhar, Avinash S.} } @article {44531, title = {Molecular modeling studies and in vitro screening of dihydrorugosaflavonoid and its derivatives against mycobacterium tuberculosis}, journal = {RSC Advances}, volume = {8}, year = {2018}, month = {MAY}, pages = {10634-10643}, abstract = {

Novel drug regimens against tuberculosis (TB) are urgently needed and may be developed by targeting essential enzymes of Mtb that sustain the pathogenicity of tuberculosis. In the present investigation, series of compounds (5a-f and 6a-f) based on a naturally occurring rugosaflavonoid moiety were evaluated by in silico molecular modeling studies against -ketoacyl-ACP reductase (MabA) (PDB ID: IUZN) and pantothenate kinase (PanK) (PDB ID: ; 3AF3). Compounds 5a, 5c, 5d, and 6c, which had docking scores of -8.29, -8.36, -8.17 and -7.39 kcal mol(-1), respectively, displayed interactions with MabA that were better than those of isoniazid (-6.81 kcal mol(-1)). Similarly, compounds 5a, 5c, 5d, and 6c, which had docking scores of -7.55, -7.64, -7.40 and -6.7 kcal mol(-1), respectively, displayed interactions with PanK that were comparable to those of isoniazid (-7.64 kcal mol(-1)). Because of their docking scores, these compounds were screened in vitro against Mycobacterium tuberculosis H37Ra (Mtb) using an XRMA protocol. Among the screened compounds, the dihydrorugosaflavonoid derivatives 5a, 5c, and 5d had IC50 values of 12.93, 8.43 and 11.3 g mL(-1), respectively, and exhibited better inhibitory activity than the parent rugosaflavonoid derivatives. The rugosaflavonoid derivative 6c had an IC50 value of 17.57 g mL(-1). The synthesized compounds also displayed inhibitory activity against the Gram-positive bacteria Bacillus subtilis and Staphylococcus aureus. The present study will be helpful for the further development of these molecules into antitubercular lead candidates.

}, issn = {2046-2069}, doi = {10.1039/c8ra00636a}, author = {Puranik, Ninad V. and Srivastava, Pratibha and Swami, Sagar and Choudhari, Amit and Sarkar, Dhiman} } @article {44391, title = {Molecular view of CO2 capture by polyethylenimine: role of structural and dynamical heterogeneity}, journal = {Langmuir}, volume = {34}, year = {2018}, month = {MAY}, pages = {5138-5148}, abstract = {The molecular thermodynamics and kinetics of CO2 sorption in Polyethylenimine (PEI) melt have been investigated systematically using GCMC and MD simulations. We elucidate presence of significant structural and dynamic heterogeneity associated with the overall absorption process. CO2 adsorption in a PEI membrane shows a distinct two-stage process of a rapid CO2 adsorption at the interfaces (hundreds of picoseconds) followed by a significantly slower diffusion limited release toward the interior bulk regions of PEI melt (hundreds of nanoseconds to microseconds). The spatial heterogeneity of local structural features of the PEI chains lead to significantly heterogeneous absorption characterized by clustering and trapping of CO2 molecules that then lead to subdiffusive motion of CO2. In the complex interplay of interaction and entropy, the latter emerges out to be the major determining factor with significantly higher solubility of CO2 near the interfaces despite having lower density of binding amine groups. Regions having higher free-volume (entropically favorable) viz. interfaces, pores and loops demonstrate higher CO2 capture ability. Various local structural features of PEI conformations, for example, inter- and intrachain loops, pores of different radii, and di- or tricoordinated pores are explored for their effects on the varying CO2 adsorption abilities.}, doi = {10.1021/acs.langmuir.8b00204}, author = {Sharma, Pragati and Chakrabarty, Suman and Roy, Sudip and Kumar, Rajnish} } @article {44532, title = {Multi-faceted role of melatonin in neuroprotection and amelioration of tau aggregates in alzheimer{\textquoteright}s disease}, journal = {Journal of Alzheimers Disease}, volume = {62}, year = {2018}, month = {MAY}, pages = {1481-1493}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is one of the major age related neurodegenerative diseases whose pathology arises due to the presence of two distinct protein aggregates, viz., amyloid-beta plaques in extracellular matrix and tau neurofibrillary tangles in neurons. Multiple factors play a role in AD pathology, which includes familial mutations, oxidative stress, and post-translational modifications. Melatonin is an endocrine hormone, secreted during darkness, derived from tryptophan, and produced mainly by the pineal gland. It is an amphipathic molecule, which makes it suitable to cross not only blood-brain barrier, but also to enter several other subcellular compartments like mitochondria and endoplasmic reticulum. In this context, the neuroprotective effect of melatonin may be attributed to its role as an antioxidant. Melatonin{\textquoteright}s pleiotropic function as an antioxidant and neuroprotective agent has been widely studied. However, its direct effect on the aggregation of tau and amyloid-beta needs to be explored. Furthermore, an important aspect of its function is its ability to regulate the process of phosphorylation of tau by affecting the function of kinases and phosphatases. In this review, we are focusing on the pleiotropic function of melatonin on the aspect of its neuroprotective function in tau pathology, which includes antioxidant function, regulation of enzymes, including kinases and enzymes involved in free radical scavenging and mitochondrial protection.

}, keywords = {Alzheimer{\textquoteright}s disease, hyperphosphorylation, melatonin, mitochondria, Protein aggregation, tau protein}, issn = {1387-2877}, doi = {10.3233/JAD-170900}, author = {Balmik, Abhishek Ankur and Chinnathambi, Subashchandrabose} } @article {44653, title = {Multistimuli-responsive interconvertible low-molecular weight metallohydrogels and the in situ entrapment of CdS quantum dots therein}, journal = {Chemistry of Materials}, volume = {30}, year = {2018}, month = {JUL}, pages = {4755-4761}, abstract = {

Two low molecular weight metallohydrogels (ZALA and CALA) have been synthesized from an amino-acid based ligand precursor (LA) and two different metal salts [zinc acetate dihydrate (ZA) and cadmium acetate dihydrate (CA), respectively. These two hydrogels show a unique chemically stimulated interconversion to each other via a reversible gel-sol gel pathway. This programmable gel-sol reversible system satisfies logic operations of a basic Boolean logic (INHIBIT) gate. Also, these hydrogels can be degraded into different MOF phases at room temperature spontaneously or in the presence of chloride and bromide salts (NaCl and NaBr.). CdS quantum dots can be grown inside the CALA gel matrix (CdS@CALA) in the presence of small amount of Na2S. This CdS doped gel exhibits time dependent tunable emission (white to yellow to orange) as a consequence of a slow agglomeration process of the entrapped quantum dots inside the gel matrix. This luminescence property also reflects the corresponding gel derived MOFs (obtained either by self-degradation of CdS@CALA or via anion induction) as well. This, to the best of our knowledge, is probably the simplest way to make a CdS quantum dot based composite material where CdS is entrapped within the gel and the gel-derived MOF matrix.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.8b01698}, author = {Bera, Saibal and Chakraborty, Amit and Karak, Suvendu and Halder, Arjun and Chatterjee, Soumyajyoti and Saha, Subhadeep and Banerjee, Rahul} } @article {45579, title = {Nonconventional method for drying of Pseudomonas aeruginosa and its comparison with conventional methods}, journal = {Drying Technology}, volume = {37}, year = {2018}, month = {MAY}, pages = {839-853}, type = {Article}, abstract = {

In this study, preparation of dried cultures of Pseudomonas aeruginosa using nonconventional drying method, namely, low-temperature low-humidity (LTLH) drying was investigated. The effect of carrier materials (whey protein, corn starch, and trehalose) was examined one at a time and also in combinations (to explore the synergistic effect). The results were compared with those obtained using spray drying and freeze drying in terms of cell survival and dry cell powder yield. The powder samples were analyzed also for morphology, flowability, particle size, and moisture content. In LTLH drying, good cell survival was observed along with high powder yield when compared with that in spray drying. Corn starch showed the highest cell survival (91\%) and powder yield (94\%, w/w) among the carrier materials employed besides resulting in good cell survival (65\%) even after a storage period of 6 months.

}, keywords = {cell survival, Encapsulation, freeze drying, Low-temperature low-humidity (LTLH) drying, Pseudomonas aeruginosa, spray drying}, issn = {0737-3937}, doi = {10.1080/07373937.2018.1469140}, author = {Umashankar, K., and Chandralekha, A. and Dandavate, T., and Tavanandi, H. A. and Raghavarao, K. S. M. S.} } @article {44538, title = {Non-isothermal analysis of extrusion film casting using multi-mode Phan-Thien Tanner constitutive equation and comparison with experiments}, journal = {Rheologica Acta}, volume = {57}, year = {2018}, month = {JUL}, pages = {493-503}, abstract = {

Extrusion film casting (EFC) is an industrially important process which produces thousands of tons of polymer films, sheets, and coating used for various industrial as well as household applications. In this paper, we focus on an instability which occurs during certain polymer processing operations operating under predominantly elongational flow, such as extrusion film casting and fiber spinning. This instability, called the draw resonance, occurs in the form of sustained periodic fluctuations in the film dimensions. It appears when the process goes beyond the critical line speed of the EFC process. In this work, a conventional linear stability analysis is carried out for nonisothermal EFC process to determine the onset of the draw resonance. The polymer rheology is modeled by the Phan-Thien Tanner (PTT) multi-mode constitutive equation. For the implementation, a conventional shooting method approach is used. Extrusion film casting experiments were also carried out using a conventional linear low-density polyethylene (LLDPE) by varying process parameters such as draw ratio and aspect ratio, to observe the effect on the stability of the process. Linear stability analysis results under non-isothermal conditions are compared and validated with existing results from literature and with our own experimental data. This work displays the effect of multiple relaxation modes as well as the temperature influence on the stability of EFC process. Finally, results also indicate that the temperature highly affects the stability of the EFC process and cannot be ignored from modeling of EFC process.

}, keywords = {Deborah number, Draw resonance, Film extrusion, Multi-mode, Nonisothermal, stability}, issn = {0035-4511}, doi = {10.1007/s00397-018-1095-7}, author = {Chougale, Sanket and Rokade, Dhammaraj and Bhattacharjee, Tanushree and Pol, Harshawardhan and Dhadwal, Renu} } @article {45388, title = {Novel 2,4-dimethyl-5-((E)-3-phenyl-3-oxoprop-1-enyl)-1H-pyrrole-3-carboxylic acid derivatives: new leads in cancer and bacterial chemotherapy}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {SEP}, pages = {9571-9575}, type = {Article}, abstract = {

The efficiently designed and synthesized novel 2,4-dimethyl-5-((E)-3-phenyl-3-oxoprop-1-enyl)-1H-pyrrole-3-carboxylic acid derivatives has been described here which is encouraged by the anticancer activities associated with sunitinib and semaxanib. Synthesized compounds were characterized by (HNMR)-H-1, (CNMR)-C-13 and high-resolution mass spectrometry (HRMS). They are evaluated for invitro antiproliferative properties on cancer cell lines as well as antibacterial activity against gram-positive and gram-negative species. The bioassay results revealed that several compounds exhibit potential antiproliferation activity. Among them, the lead compound 2,2,2-trifluoroethyl 5-((E)-3-(3-fluoro-4-(trifluoromethyl)phenyl)-3-oxoprop-1-enyl)-2,4-dimethyl-1H-pyrrole-3-carboxylate (9g) showed the most potent anticancer activity against MDA-MB-231 and PC-3 cancer cell line with GI(50) values of 5.51 and 5.15 mu g/mL and subsequently more active than sunitinib (GI(50): 6.50 mu g/mL) against PC-3. Same compound 9g also exhibits the most potent antibacterial activity against gram-positive bacteria Bacillus subtilis and Staphylococcus aureus with IC50 of 1.44 and 1.54 mu g/mL. In silico prediction, shows that all seven potent compounds obeyed Lipinski rule for druglikeness. Structure-activity relationship (SAR) study reflect the activity enhance with electron withdrawing group on aryl ring and replacement of acid by its bioisosteres i.e. amide and ester group. These studies have successfully identified many newly synthesized compounds as potential anticancer as well as antibacterial agent for further development.

}, doi = {10.1002/slct.201801458}, author = {Rasal, Nishant K. and Sonawane, Rahul B. and Choudhari, Amit S. and Chakraborty, Shakti S. and Sarkar, Dhiman D. and Jagtap, Sangeeta, V.} } @article {44363, title = {Nucleic aptamer modified porous reduced graphene oxide/MoS2 based electrodes for viral detection: application to human papillomavirus (HPV)}, journal = {Sensors and Actuators B-Chemical}, volume = {262}, year = {2018}, month = {JUN}, pages = {991-1000}, type = {Article}, abstract = {Next to graphene nanomaterials, molybdenum disulfide (MoS2) offers large surface area that can enhance its biosensing performance. In this work, we investigate the performance of glassy carbon (GC) electrodes modified successively with porous reduced graphene oxide (prGO) and molybdenum sulfide (MoS2) for the sensitive and selective detection of the L1-major capsid protein of human papilloma virus (HPV). Owing to the difficulties to perform serological assays and HPV culture efficiently, tools based on molecular recognition are becoming of great importance. We developed here an electrochemical sensor for HPV upon covalent functionalization of the electrode with an aptamer Sc5-c3, a RNA aptamer targeted against the HPV-16 L1 protein. Using differential pulse voltammetry (DPV) and an optimized sensor interface, a linear relationship between the peak current density of a redox couple such as [Fe(CN)6]4- and the concentration of HPV-16 L1 proteins in the range of 0.2-2 ng mL(-1) (3.5 pM-35.3 pM) could be reached with a detection limit of 0.1 ng mL(-1) (1.75 pM). Cross-reactivity studies demonstrated high selectivity over potential interfering species such as HPV-16 E6, opening new opportunities of the developed concept for the development of point of care devices. (C) 2018 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.snb.2018.02.065}, author = {Chekin, Fereshteh and Bagga, Komal and Subramanian, Palaniappan and Jijie, Roxana and Singh, Santosh K. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {44649, title = {Nutritional quality and antioxidant activity of wheatgrass (Triticum aestivum) unwrap by proteome profiling and DPPH and FRAP assays}, journal = {Journal of Food Science}, volume = {83}, year = {2018}, month = {AUG}, pages = {2127-2139}, abstract = {

Precious contribution of plants in the field of medicine is very well known. Wheat (Triticum aestivum) seeds and seedlings are an important source of food and feed due to the presence of various health-promoting compounds. Proteomic analysis of three seed developmental stages (0, 8, and 16 days after germination [DAG]) of wheat was carried out using liquid chromatography-mass spectrometry. A total of 297 proteins were identified and their functional annotation revealed that a majority of them were involved in preventing many diseases, oxidative stress, primary metabolism, storage, and energy related mechanisms. Particularly to mention, peroxidases, superoxide dismutases, and cytochromes are abundantly present in wheatgrass. In the ferric-reducing antioxidant power assay, antioxidant activity was increased by 1.55 times after 16 DAG as compared to 0 DAG, however it was decreased after 8 DAG. The antioxidant activity of the plant extracts by DPPH had an increasing trend after all the three time points. The percent radical scavenging activity of extract by DPPH was 15, 22, and 30 after 0, 8, and 16 DAG, respectively. Observations obtained revealed that antioxidant power of the plants is directly proportional to the age of seedlings. Data attained on wheatgrass showing that it can be a strong antioxidant agent due to its free radical scavenging activity and could be used in stress and nourishing human health. Practical ApplicationWheatgrass contains minerals, phytochemicals, active enzymes, and vitamins that can be easily absorbed. The consumption of wheatgrass juice can give better health benefits. Information about beneficial properties of wheat grass juice is clearly mentioned in this work.Proteins found in wheatgrass are known to be involved in preventing many diseases, oxidative stress, primary metabolism, storage, and energy-related mechanisms. Results of this work revealed that Triticum aestivum seedlings can act as an antioxidant agent due to their free radical scavenging activity and can be constructive to control or treat many health complications. From all these results we believed that wheatgrass can be used for the nourishment of humans.

}, keywords = {Antioxidant, LC-MSE, peroxidase, proteomics, Triticum aestivum, wheatgrass}, issn = {0022-1147}, doi = {10.1111/1750-3841.14224}, author = {Parit, Santosh B. and Dawkar, Vishal V. and Tanpure, Rahul S. and Pai, Sandeep R. and Chougale, Ashok D.} } @article {44543, title = {Overexpression of mango alcohol dehydrogenase (MiADH1) mimics hypoxia in transgenic tomato and alters fruit flavor components}, journal = {Agri Gene}, volume = {7}, year = {2018}, month = {MAR}, pages = {23-33}, abstract = {Plant alcohols and aldehydes are produced by the action of alcohol dehydrogenases (ADH) and play an important role during fruit ripening and aroma production. Alcohols are not only produced in different tissues at different stages of plant development but are also products of the fermentative pathway which gets activated by different stresses, including hypoxia. The ADH gene is a well-established marker for hypoxic response as well as plant aroma. In a previous report we have identified and characterized three ADHs (MiADH1, 2, 3) from Dashehari mango. MiADH1 was found to be fruit specific and was upregulated by ethylene and ABA, suggesting a role in fruit aroma volatile production. In order to functionally characterize MiADH1, transgenic tomato plants were developed under the control of the constitutive (CaMV35S) promoter. Transgenic tomato fruit expressing MiADH1 gene showed a change in the levels of several alcohols and aldehydes related to flavor in comparison to the control. The change in aroma and volatiles compounds was more prominent during the ripe stage as compared to unripe and mid-ripe stages of tomato fruit. The transgenic tomato plants also produced adventitious roots. Our results suggest that the overexpression of MiADH1 in tomato plants induced the fermentative pathway in roots, and mimicked hypoxic response by development of adventitious roots from the stem as an adaptive mechanism.}, doi = {10.1016/j.aggene.2017.10.003}, author = {Singh, Rajesh Kumar and Srivastava, Smriti and Chidley, Hemangi and Nath, Pravendra and Sane, Vidhu A.} } @article {45375, title = { Pharmaceutical standardization and physicochemical characterization of traditional ayurvedic marine drug: incinerated conch shell (shankha bhasma)}, journal = {Marine Drugs}, volume = {16}, year = {2018}, month = {NOV}, type = {Article}, abstract = {Natural resources such as plants, animals and minerals have always been used by mankind to develop drugs and marine world is no exception. Marine by-products like conches, pearls, mother of pearl shells, corals and so forth have been used by traditional Ayurvedic practitioners for centuries. The unique methods of these preparations are scientifically designed to eliminate unwanted impurities and convert them into bioavailable form. In this study, Conch (Xanchus pyrum) was used as a marine resource of calcium carbonate and was converted pharmaceutically from its aragonite form to calcite. All the steps of preparations and changes in the properties therein were documented and validated. Further, traditional as well as modern analytical tools were used to study its physical and chemical characters to develop a monograph. The physical characterization included particle size, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA) and Fourier Transform Infra-red (FTIR). Metal composition and heavy metal limits were determined using Inductively Coupled Plasma Optical Emission Spectrometry (ICPOES). This study revealed the rearrangement of aragonite crystals into calcite form by grinding, trituration with aloe vera juice and incineration under controlled conditions. Moreover, the finished product was found to be devoid of organic matrix that is nacre. This study creates a foundation for the development of a master formula for commonly used Shankha Bhasma in Ayurvedic medicines.}, issn = { 1660-3397}, doi = { 10.3390/md16110450}, author = {Chavan, Sandeep and Tayade, Sonali and Gupta, Vidya and Deshmukh, Vineeta and Sardeshmukh, Sadanand} } @article {44547, title = {Phase diagram of self-assembled sophorolipid morphologies from mesoscale simulations}, journal = {Journal of Molecular Liquids}, volume = {254}, year = {2018}, month = {MAR }, pages = {198-207}, abstract = {

We have constructed a phase diagram from the self-assembled morphologies of linolenic acid sophorolipid in water by performing mesoscale simulations in different concentrations. The dependence of morphologies and its properties of the self-assembled structure as a function of the concentration of bolaamphiphile in water are investigated. Two hydrophilic head groups and one hydrophobic tail group of bolaamphiphile have been mapped to beads for mesoscale simulation. The interaction parameters between different beads are calculated using Flory-Huggins solution theory. Flory-Huggins x-parameters have been calculated from atomistic simulation and experimental data of pure components constituting linolenic acid sophorolipid. We have obtained different self-assembled morphologies depending upon the concentrations of sophorolipid in water. We have explored the arrangements of hydrophobic and hydrophilic groups of the sophorolipid chains in the different morphologies. The sophorolipid chains found to be present in different structural arrangements. The residence time and flip frequency of these lipids in different orientations have been calculated and discussed in this work. (C) 2018 Elsevier B.V. All rights reserved.

}, keywords = {Bolaamphiphile, Flip frequency, Mesoscale simulation, Orientation of chains, Self-assembly}, issn = {0167-7322}, doi = {10.1016/j.molliq.2018.01.092}, author = {Sarkar, Sujit and Chakraborty, Souvik and Roy, Sudip} } @article {44548, title = {Phenazine-containing poly(phenylenevinylene): a new polymer with impressive field emission properties}, journal = {Journal of Polymer Research}, volume = {25}, year = {2018}, month = {FEB}, pages = {Article Number: 61}, abstract = {

Phenazine-containing poly(phenylenevinylene) (P(PHN-PV)) was synthesized using Wittig-Horner polycondensation of the appropriately designed monomers viz. 5,10-dioctyl-5,10-dihydrophenazine-2,7-dicarbaldehyde and tetraethyl ((2,5-bis((2-ethylhexyl) oxy)-1,4 phenylene) bis(methylene)) bis(phosphonate). The design embraces the specific motivation of incorporating the nitrogen-containing heterocycle viz. .phenazine in poly(phenylenevinylene) backbone. P(PHN-PV) exhibited reversible redox properties. In the field emission measurements performed on the film of P(F{\textquoteright}HN-PV), the turn-on field was observed to be 1.93 V/mu m for the current density of 10 mu A/cm(2). The maximum current density of similar to 4.87 mA/cm(2) was achieved at the applied field of 3.84 V/mu m. The emission current showed impressive stability for 6 h at a constant current of 1 mu A (current density of about 20 mu A/cm(2)). These results emphasize the role of phenazine heterocycle with lone pair of electrons on nitrogen in lowering the oxidation onset and in turn reduction of the turn-on voltage.

}, keywords = {field emission, Phenazine, Poly(phenylenevinylene)}, issn = {1022-9760}, doi = {10.1007/s10965-017-1428-8}, author = {Chhatre, Shraddha and Ichake, Amol and Harpale, Kashmira and Patil, Sumati and Deshpande, Aparna and More, Mahendra and Wadgaonkar, Prakash P.} } @article {45417, title = {Preparation and investigations of ABPBI membrane for HT-PEMFC by immersion precipitation method}, journal = {Journal of Membrane Science}, volume = {564}, year = {2018}, month = {OCT}, pages = {211-217}, type = {Article}, abstract = {Poly(2,5-benzimidazole) (ABPBI) membranes were prepared by an easy and benign {\textquoteright}immersion precipitation{\textquoteright} method; alleviating drawbacks of conventional solution casting method involving evaporation of the corrosive solvent. The importance of varying inherent viscosity on the properties of resulting membranes was investigated. The porous membranes formed by immersion precipitation method were analyzed for basic properties (water flux, porosity and dimensional analysis). Since the dense structure is required for their applicability for a fuel cell, through-porosity of the formed membranes was successfully eliminated using a unique shrinkage (similar to 50\%) property of ABPBI, initially, at 60 degrees C followed by at higher temperature. The correlation of membranes annealing temperature with the mechanical properties, phosphoric acid doping and proton conductivity was established. The present membranes exhibited high doping level (5.1 mol/RU), proton conductivity (0.083 S cm(-1)) and fuel cell performance. For comparison, solution casted membranes were prepared and analyzed. The OCP (0.91 V) and max power density (766mWcm(-2)) are quite promising features of this new type of membranes.}, issn = { 0376-7388}, doi = {10.1016/j.memsci.2018.07.026}, author = {Chaudhari, Harshal D. and Illathvalappil, Rajith and Kurungot, Sreekumar and Kharul, Ulhas K.} } @article {44663, title = {Preparation of macroporous scaffolds with holes in pore walls and pressure driven flows through them}, journal = {RSC Advances}, volume = {8}, year = {2018}, month = {JAN}, pages = {24731-24739}, abstract = {

Controlling the pore architecture in macroporous scaffolds has important implications for their use as reactor packings and as catalyst supports. We report the preparation of a macroporous structure, where the pore walls are perforated by holes. These materials are prepared by modification of the ice-templating protocol developed in our group. We freeze a dispersion of colloidal silica, polymer and cross-linker in a water/acetonitrile medium and allow crosslinking to proceed in the frozen state. The presence of a small fraction of acetonitrile (varying between 1.6\% to 6.4\%) results in the formation of holes in the pore walls. Increasing the acetonitrile concentration changes the pore size distribution, and produces smaller pores on average. This also results in an increasing fraction of the wall area being covered by small pores, of the order of a few microns in size. Perforation of the walls by pores does not change the overall porosity or modulus of the scaffolds. However, the introduction of pores leads to a drastic reduction in the pressure drop required to pump liquid through the scaffolds. The observed residence time distribution (RTD) in the scaffolds is represented by two plug flow reactors (PFRs) in parallel. The RTD results indicate that increasing the hole fraction in the pore walls results in increased channelling which explains the aforementioned decreased pressure drop during pressure driven flow.

}, issn = {2046-2069}, doi = {10.1039/c8ra03867h}, author = {Chatterjee, Soumyajyoti and Potdar, Aditi and Kuhn, Simon and Kumaraswamy, Guruswamy} } @article {44225, title = {Preparation of metal oxide supported catalysts and their utilization for understanding the effect of a support on the catalytic activity}, journal = {New Journal of Chemistry}, volume = {42}, year = {2018}, month = {JAN}, pages = {402-410}, type = {Article}, abstract = {

A convenient way of anchoring transition metal nanoparticles (palladium, platinum, rhodium and ruthenium) onto metal oxide supports (magnesium oxide and zirconium oxide) by means of a modified sol-gel technique is demonstrated. Use of toluene dispersed, ligand protected pre-synthesized nanoparticles during sol-gel synthesis delivered size-controlled, spatially distributed, well-adhered transition metal nanoparticles (MNPs) on metal oxide supports. The catalytic activities of these supported nanoparticles were tested for the p-nitro phenol reduction reaction. It was observed that the reaction kinetics were crucially dependent on the catalyst support and MNP size. The influence of the magnesium oxide and zirconium oxide supports towards the catalytic performance of the anchored transition MNPs was probed using cyclic voltammetry and the differences in the same were attributed to the support-induced modification in the electronic properties of the MNPs. Our results indicated that magnesium oxide is a better support than zirconium oxide.

}, issn = {1144-0546}, doi = {10.1039/c7nj03753h}, author = {Seth, Jhumur and Dubey, Prashant and Chaudhari, Vijay R. and Prasad, Bhagavatula L. V.} } @article {45466, title = {Prion-like propagation of post-translationally modified tau in alzheimer{\textquoteright}s disease: a hypothesis}, journal = {Journal of Molecular Neuroscience}, volume = {65}, year = {2018}, month = {AUG}, pages = {480-490}, type = {Review}, abstract = {

The microtubule-associated protein Tau plays a key role in the neuropathology of Alzheimer{\textquoteright}s disease by forming intracellular neurofibrillary tangles. Tau in the normal physiological condition helps stabilize microtubules and transport. Tau aggregates due to various gene mutations, intracellular insults and abnormal post-translational modifications, phosphorylation being the most important one. Other modifications which alter the function of Tau protein are glycation, nitration, acetylation, methylation, oxidation, etc. In addition to forming intracellular aggregates, Tau pathology might spread in a prion-like manner as revealed by several in vitro and in vivo studies. The possible mechanism of Tau spread can be via bulk endocytosis of misfolded Tau species. The recent studies elucidating this mechanism have mainly focussed on the aggregation and spread of repeat domain of Tau in the cell culture models. Further studies are needed to elucidate the prion-like propagation property of full-length Tau and its aggregates in a more intense manner in vitro as well as in vivo conditions. Varied post-translational modifications can have discrete effects on aggregation propensity of Tau as well as its propagation. Here, we review the prion-like properties of Tau and hypothesize the role of glycation in prion-like properties of Tau. This post-translationally modified Tau might have an enhanced propagation property due to differential properties conferred by the modifications.

}, keywords = {Alzheimer disease, Post-translational modifications of tau, Propagation of tau, Tau, Tauopathies}, issn = {0895-8696}, doi = {10.1007/s12031-018-1111-5}, author = {Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose} } @article {45409, title = { Process intensification strategies for enhanced holocellulose solubilization: Beneficiation of pineapple peel waste for cleaner butanol production}, journal = {Journal of Cleaner Production}, volume = {199}, year = {2018}, month = {OCT}, pages = {937-947}, type = {Article}, abstract = {Biorefinery sector has become a serious dispute for cleaner and sustainable development in recent years. In the present study, pretreatment of pineapple peel waste was carried out in high pressure reactor using various pretreatment-enhancers. The type and concentration effect of each enhancer on hemicellulose solubilization was systematically investigated. The binary acid (phenol + sulfuric acid) at 180 degrees C was found to be superior amongst other studied enhancers, giving 81.17\% (w/v) hemicellulose solubilization in liquid-fraction under optimized conditions. Solid residue thus obtained was subjected to enzymatic hydrolysis that resulted into 24.50\% (w/v) cellulose breakdown. Treated solid residue was further characterized by scanning electron microscopy and fourier transform infrared spectroscopy to elucidate structural changes. The pooled fractions (acid treated and enzymatically hydrolyzed) were fermented using Clostridium acetobutylicum NRRL B 527 which resulted in butanol production of 5.18 g/L with yield of 0.13 g butanol/g sugar consumed. Therefore, pretreatment of pineapple peel waste evaluated in this study can be considered as milestone in utilization of low cost feedstock, for bioenergy production. (C) 2018 Elsevier Ltd. All rights reserved.}, issn = { 0959-6526}, doi = { 10.1016/j.jclepro.2018.07.205}, author = {Khedkar, Manisha A. and Nimbalkar, Pranhita R. and Kamble, Sanjay P. and Gaikwad, Shashank G. and Chavan, Prakash V. and Bankar, Sandip B.} } @article {45436, title = { Rational design of coumarin derivatives as antituberculosis agents}, journal = {Future Medicinal Chemistry}, volume = {10}, year = {2018}, month = {OCT}, pages = {2431-2444}, type = {Article}, abstract = {A series of coumarin derivatives was designed as potential antituberculosis agents. Results: The compounds were screened against active and dormant Mycobacterium tuberculosis (Mtb). Compounds 3k and 3n were found to have the most promising activity against replicating MtbH37Rv exhibiting minimum inhibitory concentration of 4.63 and 9.75 mu M respectively. The compounds were also effective against dormant MtbH37Rv exhibiting more potency than the standard drugs, isoniazid and rifampicin. The compounds were found to be non-cytotoxic against human cell lines. Conclusion: This study provides promising antituberculosis agents that are effective against replicating as well as dormant Mtb and can thus act as potential leads for further development. }, issn = {1756-8919}, doi = {10.4155/fmc-2018-0015}, author = {Mali, Hemlata M. and Sabale, Sandip S. and Degani, Mariam S. and Borkute, Rachana and Choudhari, Amit S. and Sarkar, Dhiman and Krishna, Vagolu Siva and Sriram, Dharmarajan} } @article {44559, title = {Retention of anticancer activity of curcumin after conjugation with fluorescent gold quantum clusters: an in vitro and in vivo xenograft study}, journal = {ACS Omega}, year = {2018}, month = {MAY}, abstract = {Gold nanoparticles (Au NPs) have been thoroughly investigated for anti-cancer therapy. However, their undesired high gold content remains a problem when injected into the body for drug delivery applications. In this report, we made an effort to conjugate the curcumin molecules on the surface of gold quantum clusters (Au QCs) by a novel in situ synthesis method which provides an alternative route to not only reduce the metallic content but also increase the water solubility of curcumin and the loading efficiency. Here, curcumin itself acts as a reducing and capping agent for the synthesis of Au QCs. The UV-vis absorption, fluorescence, transmission electron microscopy, and electrospray ionization mass spectrometry results confirmed the synthesis of fluorescent Au QCs. Curcumin-conjugated Au NPs (C-Au NPs) and glutathione (GSH)-conjugated Au QCs (GSH-Au QCs) were also synthesized to visualize the effect of particle size and the capping agent, respectively, on the cytotoxicity to normal and cancer cells. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed that the curcumin-conjugated Au QCs (C-Au QCs) were less cytotoxic to normal cells while almost the same cytotoxic to cancer cells in comparison to curcumin itself, which indicates that curcumin preserves its anticancer property even after binding to the Au QCs. However, C-Au NPs and GSH-Au QCs did not show any cytotoxicity against the normal and cancer cells at the concentration used. The western blot assay indicated that C-Au QCs promote apoptosis in cancer cells. Further, the in vivo study on severe combined immunodeficiency mice showed that C-Au QCs also inhibited the tumor growth efficiently without showing significant toxicity to internal organs.}, doi = {10.1021/acsomega.8b00113}, author = {Khandelwal, Puneet and Alam, Aftab and Choksi, Arpankumar and Chattopadhyay, Samit and Poddar, Pankaj} } @article {44563, title = {Revisiting amino acids and peptides as anti-glycation agents}, journal = {Medchemcomm}, volume = {9}, year = {2018}, month = {APR}, pages = {614-624}, abstract = {

The importance of controlling or preventing protein glycation cannot be overstated and is of prime importance in the treatment of diabetes and associated complications including Alzheimer{\textquoteright}s disease, cataracts, atherosclerosis, kidney aliments among others. In this respect, simple molecules such as amino acids and peptides hold much promise both in terms of ease and scale-up of synthesis as well as in relation to negligible/low associated toxicity. In view of this, a comprehensive account of literature reports is presented, that documents the anti-glycation activity of natural and non-natural amino acids and peptides. This review also discusses the chemical reactions involved in glycation and the formation of advanced glycation end-products (AGEs) and possible/probable intervention sites and mechanism of action of the reported amino acids/peptides. This aspect of amino acids/peptides adds to their growing importance in medicinal and therapeutic applications.

}, issn = {2040-2503}, doi = {10.1039/c7md00514h}, author = {Chilukuri, H. and Kulkarni, Mahesh J. and Fernandes, M.} } @article {44190, title = {Rufinamide: crystal structure elucidation and solid state characterization}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {149}, year = {2018}, month = {FEB}, pages = {185-192}, type = {Article}, abstract = {

Rufinamide (R) is a triazole derivative approved for the management of partial seizures and seizures associated with Lennox-Gastaut Syndrome, in November 2007. Crystal structure, solid state characterization, drug-excipient compatibility and solubility play a pivotal role in formulation development. This work deals with the crystal structure elucidation of R by single crystal X-ray diffraction and solid state characterization by thermal, spectroscopic and crystallographic techniques. Drug- excipient compatibility was assessed by differential scanning calorimetry (DSC). New RP-HPLC method for quantification of R was developed with improved retention time. Solubility and dissolution of drug in different media was determined. Additionally, the flow behavior of the drug was evaluated by measuring Carr{\textquoteright}s index and Hausner{\textquoteright}s ratio, while the compressibility behavior was studied using Well{\textquoteright}s protocol. R crystallized from dimethylformamide (R-DMF) was utilized for single crystal analysis. The drug crystallized in triclinic crystal system with P-1 space group. Asymmetric unit cell consists of two molecules of R held by intermolecular hydrogen bond (connected by N-H center dot center dot center dot O, which forms the catemeric chain). Analytical outcomes from DSC, thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) revealed that the drug was present in pure crystalline form and was devoid of any polymorphic or pseudopolymorphic impurities. Influence of pH on the solubility and dissolution of R-DMF was found to be insignificant. The drug exhibited poor aqueous solubility, which was improved nearly 4.6 fold with the addition of 2\% sodium lauryl sulphate (SLS). The drug exhibits poor flow and elastic compression nature. Excipients such as poly ethylene glycol (PEG) 8000, SLS, lactose monohydrate, starch and Hydroxypropyl methylcellulose (HPMC) E15 were incompatible with R-DMF as identified by thermal analysis. It is envisaged that these information regarding solid state properties of R-DMF would aid in identifying a logical path for formulation development. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Compressibility, Dissolution media, DSC, HPLC method, solubility}, issn = {0731-7085}, doi = {10.1016/j.jpba.2017.11.003}, author = {Salunke, Nita and Thipparaboina, Rajesh and Chavan, Rahul B. and Lodagekar, Anurag and Mittapalli, Sudhir and Nangia, Ashwini and Shastri, Nalini R.} } @article {44362, title = {Sensitive electrochemical detection of cardiac troponin I in serum and saliva by nitrogen-doped porous reduced graphene oxide electrode}, journal = {Sensors and Actuators B-Chemical}, volume = {262}, year = {2018}, month = {JUN}, pages = {180-187}, type = {Article}, abstract = {Cardiovascular diseases pose one of the highest mortality risks among all diseases in developed countries, steadily increasing the burden on the health systems. Early diagnosis of cardiovascular diseases has consequently become highly important to decrease mortality and to use more adapted therapeutic decisions. We demonstrate here the utility of nitrogen-doped reduced graphene oxide (N-prGO) for detecting and quantifying of cardiac troponin I (cTnI), a key human cardiac protein biomarker, under physiologically relevant conditions. Non-covalent modification of N-prGO by 1-pyrenecarboxylic acid (py-COOH) and poly(ethylene glycol) modified pyrene (py-PEG) ligands allowed the covalent integration of Tro4 aptamer, known for its high selectivity towards cTnI. Using differential pulse voltammetry (DPV), a label-free electrochemical sensor for cTnI for concentrations down to 1 pgmL(-1) in human serum could be obtained. This sensitive detection arises from the integration of a porous nanomaterial with excellent electrochemical properties being easily amendable to site-specific surface modification. (C) 2018 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.snb.2018.01.215}, author = {Chekin, Fereshteh and Vasilescu, Alina and Jijie, Roxana and Singh, Santosh K. and Kurungot, Sreekumar and Iancu, Madalina and Badea, Gabriela and Boukherroub, Rabah and Szunerits, Sabine} } @article {44381, title = {Single pot selective hydrogenation of furfural to 2-methylfuran over carbon supported iridium catalysts}, journal = {Green Chemistry}, volume = {20}, year = {2018}, month = {MAY}, pages = {2027-2037}, abstract = {Various iridium supported carbon catalysts were prepared and screened for the direct hydrogenation of furfural (FFR) to 2-methyl furan (2-MF). Amongst these, 5\% Ir/C showed excellent results with complete FFR conversion and highest selectivity of 95\% to 2-MF at a very low H-2 pressure of 100 psig. Metallic (Ir degrees) and oxide (IrO2) phases of Ir catalyzed the first step hydrogenation involving FFR to FAL and subsequent hydrogenation to 2-MF, respectively. This was confirmed by XPS analysis and some control experiments. At a low temperature of 140 degrees C, almost equal selectivities of FAL (42\%) and 2-MF (43\%) were observed, while the higher temperature (220 degrees C) favored selective hydrodeoxygenation. At optimized temperature, 2-MF was formed selectively while higher pressure and higher catalyst loading favored ring hydrogenation of furfural rather than side chain hydrogenation. With the combination of several control experimental results and detailed catalyst characterization, a plausible reaction pathway has been proposed for the selective formation of 2-MF. The selectivity to various other products in FFR hydrogenation can be manipulated by tailoring the reaction conditions over the same catalyst.}, doi = {10.1039/c8gc00284c}, author = {Date, Nandan S. and Hengne, Amol M. and Huang, K-W. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {44572, title = {Single-particle tracking to probe the local environment in ice-templated crosslinked colloidal assemblies}, journal = {Langmuir}, volume = {34}, year = {2018}, month = {APR}, pages = {4603{\textendash}4613}, type = {Article}, abstract = {

We use single-particle tracking to investigate colloidal dynamics in hybrid assemblies comprising colloids enmeshed in a crosslinked polymer network. These assemblies are prepared using ice templating and are macroporous monolithic structures. We investigate microstructure-property relations in assemblies that appear chemically identical but show qualitatively different mechanical response. Specifically, we contrast elastic assemblies that can recover from large compressive deformations with plastic assemblies that fail on being compressed. Particle tracking provides insights into the microstructural differences that underlie the different mechanical response of elastic and plastic assemblies. Since colloidal motions in these assemblies are sluggish, particle tracking is especially sensitive to imaging artifacts such as stage drift. We demonstrate that the use of wavelet transforms applied to trajectories of probe particles from fluorescence microscopy eliminates stage drift, allowing a spatial resolution of about 2 nm. In elastic and plastic scaffolds, probe particles are surrounded by other particles{\textemdash}thus, their motion is caged. We present mean square displacement and van Hove distributions for particle motions and demonstrate that plastic assemblies are characterized by significantly larger spatial heterogeneity when compared with the elastic sponges. In elastic assemblies, particle diffusivities are peaked around a mean value, whereas in plastic assemblies, there is a wide distribution of diffusivities with no clear peak. Both elastic and plastic assemblies show a frequency independent solid modulus from particle tracking microrheology. Here too, there is a much wider distribution of modulus values for plastic scaffolds as compared to elastic, in contrast to bulk rheological measurements where both assemblies exhibit a similar response. We interpret our results in terms of the spatial distribution of crosslinks in the polymer mesh in the colloidal assemblies.

}, issn = {7437463}, doi = {0.1021/acs.langmuir.7b04120}, author = {Suresh, Karthika and Sharma, D. K. and Chulliyil, Ramya and Sarode, Ketan Dinkar and Kumar, V. Ravi and Choudhary, Arindam and Kumaraswamy, Guruswamy} } @article {45458, title = {Single-pot reductive rearrangement of furfural to cyclopentanone over silica-supported Pd catalysts}, journal = {ACS Omega}, volume = {3}, year = {2018}, month = {AUG}, pages = {9860-9871}, type = {Article}, abstract = {

Direct one-pot hydrogenation of furfural (FFR) to cyclopentanone (CPO) was investigated over different silica-supported Pd catalysts. Among these, 4\% Pd on fumed silica (4\%Pd/f-SiO2) showed remarkable results, achieving almost 98\% furfural (FFR) conversion with similar to 89\% selectivity and 87\% yield to cyclopentanone at 165 degrees C and 500 psig H-2 pressure. More interestingly, the fumed-silica-supported catalyst tuned the selectivity toward the rearrangement product, i.e, cyclopentanone, whereas all of the other supports were found to give ring hydrogenation as well as side chain hydrogenation products due to their parent Bronsted acidity and specific support properties. X-ray diffraction data revealed the presence of different phases of the face-centered cubic lattice of metallic Pd along with lowest crystallite size of 15.6 nm in the case of the silica-supported Pd catalyst. However, Pd particle size was found to be in the range of 5-13 nm with even dispersion over the silica support, confirmed by high-resolution transmission electron microscopy analysis. While studying the effect of reaction parameters, it was observed that lower temperature gave low furfural conversion of 58\% with only 51\% CPO selectivity.. Similarly, higher H-2 pressure lowered CPO selectivity with subsequent increase in 2-methyl furan and ring hydrogenation product 2-methyl furan and 2-methyl tetrahydrofuran. Thus, as per the requirement, the product selectivity can be tuned by varying the type of support and/or the reaction parameters suitably. With the help of several control experiments and the characterization data, a plausible reaction pathway was proposed for the selective formation of cyclopentanone.

}, issn = {2470-1343}, doi = {10.1021/acsomega.8b00980}, author = {Date, Nandan S. and Kondawar, Sharda E. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {44371, title = {Soluble polybenzimidazoles with intrinsic porosity: synthesis, structure, properties and processability}, journal = {56Journal of Polymer Science Part A-Polymer Chemistry}, volume = {56}, year = {2018}, month = {MAY}, pages = {1046-1057}, type = {Article}, abstract = {We have explored two novel comonomers, namely, 4,16-dicarboxyl[2.2]paracyclophane and 5,5,6,6-tetraamino-3,3,3,3-tetramethyl-1,1-spirobi[indane], for the synthesis of co-polybenzimidazoles (co-PBIs) with intrinsic porosity. Both these monomers possess twisted structures that can lead to awkward macromolecular shapes that cannot pack efficiently. The consequences of introducing these two monomers on the structure and properties of PBIs are reported. The random copolymers synthesized are amorphous and possess glass transition temperatures (T(g)s) greater than 400 degrees C. T-g decreases with increasing comonomer content indicating an increase in fractional free volume. The copolymers have low surface area. TEM and BET measurements show evidence of mesopore formation. The copolymers show significant carbon dioxide adsorption. Single chain molecular dynamics simulation of 24-mer repeat units shows intramolecular void spaces arising as a result of distorted polymer chain with reduced conformational mobility. These studies define a new synthetic strategy for bottoms-up synthesis of PBIs with intrinsic porosity. (c) 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 1046-1057}, doi = {10.1002/pola.28979}, author = {Kumar, Vikas and Chatterjee, Shyambo and Sharma, Pragati and Chakrabarty, Suman and Avadhani, Chilukuri V. and Sivaram, Swaminathan} } @article {44633, title = {Solvent and pH-stable poly(2,5-benzimidazole) (ABPBI) based UF membranes: preparation and characterizations}, journal = {Journal of Membrane Science}, volume = {563}, year = {2018}, month = {OCT }, pages = {743-751}, abstract = {

Poly(2,5-benzimidazole), commonly known as ABPBI, is an excellent thermo-chemically stable polymer that is widely evaluated as a proton exchange membrane material in a fuel cell. Its niche intrinsic characteristics could be highly useful in the membrane preparation for various separation applications, especially under harsher environments. To gain insights towards this feasibility, ABPBI based supported membranes were prepared by phase inversion method. Effects of the nonwoven porous support material (polypropylene/polyester), non-solvent (water/0.5 N NaOH) and polymer concentration (6 or 4 wt\%) on the membrane properties (water flux, rejection and porosity) were investigated. The stability of these membranes towards common organic solvents, concentrated acid (25 N H2SO4), base (2.5 N NaOH) and an autoclave condition was analyzed. ABPBI membrane showed a pore collapse after drying. In order to avoid this, the glycerol treatment was not only found to be suitable but also repeatable, without significant deviations in the water flux.

}, keywords = {ABPBI membrane, Pore size distribution, Solvent stable membranes, Ultrafiltration}, issn = {0376-7388}, doi = {10.1016/j.memsci.2018.06.052}, author = {Lohokare, Harshada R. and Chaudhari, Harshal D. and Kharul, Ulhas. K.} } @article {45402, title = {Spatial-temporal spectroscopy characterizations and electronic structure of methylammonium perovskites}, journal = {MRS Communications}, volume = {8}, year = {2018}, month = {SEP}, pages = {961-969}, type = {Article}, abstract = {

Using time-resolved laser-scanning confocal microscopy and ultrafast optical pump/THz probe spectroscopy, we measure photoluminescence (PL) and THz-conductivity in perovskite micro-crystals and films. PL quenching and lifetime variations occur from local heterogeneity. Ultrafast THz-spectra measure sharp quantum transitions from excitonic Rydberg states, providing weakly bound excitons with a binding energy of similar to 13.5 meV at low temperatures. Ab-initio electronic structure calculations give a direct band gap of 1.64 eV, a dielectric constant of similar to 18, heavy electrons, and light holes, resulting in weakly bound excitons, consistent with the binding energies from the experiment. The complementary spectroscopy and simulations reveal fundamental insights into perovskite light-matter interactions.

}, doi = {10.1557/mrc.2018.114}, author = {Liu, Zhaoyu and Bhamu, K. C. and Luo, Liang and Shah, Satvik and Park, Joong-Mok and Cheng, Di and Long, Men and Biswas, Rana and Fungara, F. and Shiner, Ruth and Shiner, Joseph and Vela, Javier and Wang, Jigang} } @article {44568, title = {Spinel-type mixed oxides for stable and selective partial oxidation of benzyl alcohol}, journal = {ChemistrySelect}, volume = {3}, year = {2018}, month = {APR }, pages = {3751-3761}, type = {Article}, abstract = {

Benzaldehyde is an important chemical intermediate, which need to be prepared through an eco-friendly process. Manganese oxides are active as catalysts for its preparation through partial oxidation of benzyl alcohol. In this study, Cu, Co and Mn containing spinel based mixed oxides (CuxMn3-xO4) were prepared and tested for partial oxidation of benzyl alcohol to get benzaldehyde with high selectivity. The catalytic activity strongly depended on chemical composition, acid-base properties and oxygen uptake. The influence of chemical composition, reaction temperature, oxygen partial pressure and the weight hourly space velocity (WHSV) were investigated to optimize benzaldehyde yield and to stabilize the catalyst activity. A high benzaldehyde selectivity of 98\%, accompanied with benzyl alcohol conversion of 84.5\% was obtained over Cu0.25Mn2.75O4 catalyst at 300 {\textdegree}C. It was evident from temperature programmed desorption (TPD) of CO2 that this catalyst was found to have optimum basicity and high oxygen uptake, thus imparting high activity and stability. Activity and catalyst life could be attributed to appropriate acid-base properties. Supporting Information

}, issn = {23656549}, doi = {10.1002/slct.201800321}, author = {Gurrala, Lakshmiprasad and Nagpure, Atul S. and Gurav, Hanmant R. and Chilukur, Satyanarayana} } @conference {45431, title = { Strategies to reduce necking and drawdown defects in polymer melt extrusion film casting process}, booktitle = {256th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nanoscience, Nanotechnology and Beyond}, year = {2018}, month = {AUG}, publisher = {AMER CHEMICAL SOC.}, organization = {AMER CHEMICAL SOC.}, address = {Boston, MA}, abstract = {256th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nanoscience, Nanotechnology and Beyond}, author = {Rokade, Dhammaraj and Chougale, Sanket and Pol, Harshawardhan} } @article {44551, title = {Structure and function of a highly active Bile Salt Hydrolase (BSH) from Enterococcus faecalis and post-translational processing of BSH enzymes}, journal = {Biochim Biophys Acta.}, volume = {1866}, year = {2018}, month = {JAN}, pages = {507-518}, type = {Journal Article}, abstract = {Bile Salt Hydrolase (BSH), a member of Cholylglycine hydrolase family, catalyzes the de-conjugation of bile acids and is evolutionarily related to penicillin V acylase (PVA) that hydrolyses a different substrate such as penicillin V. We report the three-dimensional structure of a BSH enzyme from the Gram-positive bacteria Enterococcus faecalis (EfBSH) which has manifold higher hydrolase activity compared to other known BSHs and displays unique allosteric catalytic property. The structural analysis revealed reduced secondary structure content compared to other known BSH structures, particularly devoid of an anti-parallel β-sheet in the assembly loop and part of a β-strand is converted to increase the length of a substrate binding loop 2. The analysis of the substrate binding pocket showed reduced volume owing to altered loop conformations and increased hydrophobicity contributed by a higher ratio of hydrophobic to hydrophilic groups present. The aromatic residues F18, Y20 and F65 participate in substrate binding. Thus, their mutation affects enzyme activity. Docking and Molecular Dynamics simulation studies showed effective polar complementarity present for the three hydroxyl (-OH) groups of GCA substrate in the binding site contributing to higher substrate specificity and efficient catalysis. These are unique features characteristics of this BSH enzyme and thought to contribute to its higher activity and specificity towards bile salts as well as allosteric effects. Further, mechanism of autocatalytic processing of Cholylglycine Hydrolases by the excision of an N-terminal Pre-peptide was examined by inserting different N-terminal pre-peptides in EfBSH sequence. The results suggest that two serine residues next to nucleophile cysteine are essential for autocalytic processing to remove precursor peptide. Since pre-peptide is absent in EfBSH the mutation of these serines is tolerated. This suggests that an evolution-mediated subordination of the pre-peptide excision site resulted in loss of pre-peptide in EfBSH and other related Cholylglycine hydrolases.}, keywords = {autocatalytic processing, Bile salt hydrolase, molecular dynamics, Mutagenesis, Polar complementarity, X-ray crystallography}, issn = {15709639}, doi = {0.1016/j.bbapap.2018.01.003.}, author = {Chand, D.}, editor = {Panigrahi, P.} } @article {45525, title = {Study of photoelectrochemical conductivity mechanism and electrochemical impedance spectroscopy of bulk CuInTe2 {\textendash} Electrolyte interface}, journal = {Surfaces and interfaces}, volume = {12}, year = {2018}, month = {SEP }, pages = {202-212}, type = {Article}, abstract = {CuInTe2 (CIT) thin films were electrochemically deposited in an aqueous electrolyte on fluorine doped tin oxide (FTO) coated glass substrates for potentials ranging from -0.6 V to -0.9 V at pH 4. Films were annealed at 400 {\textdegree}C for 15 min in air ambient. Both as-deposited and annealed layers were characterized by various characterization techniques. The conductivity type of the CIT layers was studied by photoelectrochemical (PEC) response and solid{\textendash}electrolyte interface by impedance spectroscopy. As-deposited samples confirmed amorphous nature of CIT in contrast to that of polycrystalline films obtained upon annealing. Three prominent reflections (1 1 2), (2 2 0)/(2 0 4) and (3 1 2)/(1 1 6) of chalcopyrite CIT were obtained upon annealing. The optical band gap values \~{}0.90 eV and 1.08 eV and \~{}0.88 eV and 1.01 eV were estimated for as-deposited and annealed CIT layers deposited at -0.7 V and -0.8 V respectively. The most prominent A1 mode observed at 123 cm-1 in the Raman spectra of chalcopyrite CIT was shifted towards lower wavelengths due to the development of tensile strain. Very compact, well adhesive and void free globular layers were deposited at pH 4. The indium content was found to be increased with increasing the deposition potential which agrees well with the overpotential deposition of indium. Photoelectrochemical (PEC) study confirms the growth of p-type CIT layers. The negative resistance at higher frequency domain (3 MHz to 10 kHz) from electrochemical impedance spectroscopy (EIS) confirms the power/energy giving nature of CIT/electrolyte interface at higher frequency and diffusion mechanism of ionic species dominate at lower frequency region}, issn = { 2468-0230}, doi = {10.1016/j.surfin.2018.05.012}, author = {Lakhe, M. G. and Rohom, A. B. and Londhe, P. U. and Bhand, G. R. and Chaure, N. B.} } @article {44512, title = {Synthesis and biological evaluation of novel triazole-biscoumarin conjugates as potential antitubercular and anti-oxidant agents}, journal = {Research on Chemical Intermediates}, volume = {44}, year = {2018}, month = {MAY}, pages = {1-28}, type = {Journal Article}, abstract = {

The synthesis of a new series of triazole-biscoumarin conjugates by using a molecular hybridization approach is described. The newly synthesized compounds 6a{\textendash}k were evaluated for their in vitro antitubercular activity against active and dormant Mtb H37Ra and anti-oxidant activity against DPPH radical scavenging. Molecular docking simulations for the antitubercular activity showed that the conjugates 6a{\textendash}k bind in the pocket of the DprE1 enzyme. Most of the conjugates displayed good antitubercular activity against both the active and dormant Mtb H37Ra strain. The compound 6h displayed very good antitubercular activity against dormant Mtb H37Ra with an IC50 value of 1.44 μg/mL. Most of the synthesized conjugates exhibit excellent anti-oxidant activity with an IC50 of less than the standard BHT. Compound 6b is the most active among all the conjugates with an IC50 value of 08.17 {\textpm} 0.11 μg/mL. The molecular docking study shows good agreement between the observed antitubercular activity and the binding affinity.

}, keywords = {1, 2, 3-triazoles, Anti-oxidant activity, Antitubercular activity, Biscoumarins, Molecular docking}, issn = {9226168}, doi = {10.1007/s11164-018-3490-1}, author = {Danne, Ashruba B.}, editor = {Choudhari, Amit S.} } @article {44509, title = {Synthesis and biological evaluation of some bicyclic [2-(2,4-dimethylphenylthio)phenyl] aniline and its amide derivatives as potential antitubercular agents}, journal = {Journal of Chemical Sciences}, volume = {130}, year = {2018}, month = {FEB }, pages = {22}, type = {Journal Article}, abstract = {

In the present investigation, a series of bicyclic [2-(2,4-dimethylphenylthio)phenyl] aniline analogues were synthesized and characterized by IR, NMR (1H and 13C) and mass spectra. All newly synthesized 15 compounds were inspected for their in vitro antitubercular activity against Mycobacterium tuberculosis (MTB) H37Ra in both active and dormant state using an established XTT Reduction Menadione assay (XRMA). The titled compounds exhibited minimum inhibitory concentration (MIC90) ranging from 0.05 to \>30 (μg/mL). The potent four compounds were further evaluated in THP-1 infection model where they demonstrated significant antitubercular activity. All the ex vivo active were further evaluated for cytotoxic activity against THP-1, MCK7 and HeLa cell lines in order to check selectivity index. All compounds were further screened against four different bacteria to assess their selectivity towards MTB. These derivatives could be considered as a precursor structure for further design of antituberculosis agent.

}, keywords = {4-dimethylphenylthio)phenyl] aniline, antituberculosis activity, Cytotoxicity, [2-(2}, issn = {9743626}, doi = {10.1007/s12039-018-1424-5}, author = {Patil, Yogesh and Shingare, Ramesh} } @article {44650, title = {Synthesis and biological evaluation of some new tricyclic pyrrolo[3,2-e]tetrazolo[1,5-c]pyrimidine derivatives as potential antitubercular agents}, journal = {Archiv Der Pharmazie}, volume = {351}, year = {2018}, month = {AUG}, pages = {e1800040}, abstract = {

A series of new tricyclic pyrrolo[3,2-e]tetrazolo[1,5-c]pyrimidines 8a-l were synthesized and characterized by IR, NMR (H-1 and C-13), and mass spectral analysis. The newly synthesized compounds 8a-l were inspected for their in vitro antitubercular activity against Mycobacterium tuberculosis (MTB) H37Ra using an established XTT reduction menadione assay (XRMA). The title compounds exhibited minimum inhibitory concentrations (MIC90) ranging from 0.09 to \>30g/mL. Five compounds (8c, 8i-l) were further confirmed for their dose-dependent effect against MTB. These compounds were evaluated in the THP-1 infection model, where 8i (MIC90=0.35g/mL), 8j (MIC90=1.17g/mL), 8k (MIC90=2.38g/mL), and 8l (MIC90=1.17g/mL) demonstrated significant antitubercular activity. All the ex vivo active compounds showed insignificant cytotoxicity against the human cancer cell lines, HeLa, MCF-7, and THP-1. Inactivity of all these compounds against Gram positive and Gram negative bacteria indicates their specificity. Molecular docking studies in the active site of the sterol 14alpha-demethylase (CYP51) enzyme revealed a similar binding mode to the native ligand in the crystal structure, thereby helping to understand the ligand-protein interactions and to establish a structural basis for inhibition of MTB. The results suggest novel pharmacophores as selective and specific inhibitors against MTB that can be explored further to synthesize lead compounds against tuberculosis. In summary, the results clearly indicate the identification of some novel, selective, and specific inhibitors against MTB that can be explored further for potential antitubercular drugs.

}, keywords = {2-e]tetrazolo[1, 5-c]pyrimidine, Antituberculosis, Cytotoxicity, Molecular docking, tricyclic pyrrolo[3}, issn = {0365-6233}, doi = {10.1002/ardp.201800040}, author = {Patil, Yogesh and Shingare, Ramesh and Choudhari, Amit and Borkute, Rachana and Sarkar, Dhiman and Madje, Balaji R.} } @article {45400, title = { Synthesis and characterization of partially bio-based polyimides based on biphenylene-containing diisocyanate derived from vanillic acid }, journal = {European Polymer JOurnal }, volume = {109}, year = {2018}, month = { DEC}, pages = {257-264}, type = {Article }, abstract = {A new bio-based biphenylene-containing diisocyanate, namely, 5,5{\textquoteright}-diisocyanato-2,2{\textquoteright},3,3{\textquoteright}-tetramethoxy-1,1{\textquoteright}-biphenyl (BDI) was synthesized starting from vanillic acid - a lignin-derived phenolic acid. A series of new partially bio-based polyimides was prepared by polycondensation of BDI with five commercially available aromatic dianhydrides. Polyimides exhibited good solubility in organic solvents and medium molecular weights (Mn (GPC, polystyrene standard) = 25,100-32,200 g mol(-1)). Polyimides showed good thermal stability with 10\% degradation temperature and glass transition temperature in the range 459-473 degrees C and 262-329 degrees C, respectively.}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2018.09.054}, author = {Kuhire, Sachin S. and Ichake, Amol B. and Grau, Etienne and Cramail, Henri and Wadgaonkar, Prakash P.} } @article {45487, title = {Synthesis of 3-azidopiperidine skeleton employing ceric ammonium nitrate (CAN)-mediated regioselective azidoalkoxylation of enol ether: total synthesis of d-2 receptor agonist (+/-)-quinagolide}, journal = {Organic letters }, volume = {20}, year = {2018}, month = {NOV }, pages = {7011-7014}, type = {Article }, abstract = {The total synthesis of (+/-)-quinagolide, which is a D-2 receptor agonist, was accomplished via a ceric ammonium nitrate (CAN)-mediated regioselective azidoalkoxylation of enol ether route. Key features of the synthesis include Claisen rearrangement, PPTS (pyridinium p-toluene-sulfonate)-catalyzed one-pot acetal deprotection, followed by a diastereoselective Henry reaction, which enables construction of the required trans ring junction and CAN-mediated regioselective azidoalkoxylation of enol ether. The PPTS-catalyzed intramolecular diastereoselective Henry reaction to fix three contiguous stereocenters on tetrahydronaphthalene and the first-of-its-kind synthesis of the 3-azidopiperidine skeleton, using a CAN -mediated regioselective azidoalkoxylation of enol ether, are important findings of the present work.}, issn = {1523-7060}, doi = { 10.1021/acs.orglett.8b02900}, author = {Chavan, Subhash P. and Kadam, Appasaheb L. and Lasonkar, Pradeep B. and Gonnade, Rajesh G.} } @article {44494, title = {Targeted phenotypic screening in plasmodium falciparum and toxoplasma gondii reveals novel modes of action of medicines for malaria venture malaria box molecules}, journal = {mSphere}, volume = {3}, year = {2018}, month = {JAN}, pages = { e00534-17}, type = {Journal Article}, abstract = {The Malaria Box collection includes 400 chemically diverse small molecules with documented potency against malaria parasite growth, but the underlying modes of action are largely unknown. Using complementary phenotypic screens against Plasmodium falciparum and Toxoplasma gondii, we report phenotype-specific hits based on inhibition of overall parasite growth, apicoplast segregation, and egress or host invasion, providing hitherto unavailable insights into the possible mechanisms affected. First, the Malaria Box library was screened against tachyzoite stage T. gondii and the half-maximal effective concentrations (EC50s) of molecules showing >=80\% growth inhibition at 10 {\textmu}M were determined. Comparison of the EC50s for T. gondii and P. falciparum identified a subset of 24 molecules with nanomolar potency against both parasites. Thirty molecules that failed to induce acute growth inhibition in T. gondii tachyzoites in a 2-day assay caused delayed parasite death upon extended exposure, with at least three molecules interfering with apicoplast segregation during daughter cell formation. Using flow cytometry and microscopy-based examinations, we prioritized 26 molecules with the potential to inhibit host cell egress/invasion during asexual developmental stages of P. falciparum. None of the inhibitors affected digestive vacuole integrity, ruling out a mechanism mediated by broadly specific protease inhibitor activity. Interestingly, five of the plasmodial egress inhibitors inhibited ionophore-induced egress of T. gondii tachyzoites. These findings highlight the advantage of comparative and targeted phenotypic screens in related species as a means to identify lead molecules with a conserved mode of action. Further work on target identification and mechanism analysis will facilitate the development of antiparasitic compounds with cross-species efficacy.}, issn = {23795042}, doi = {10.1128/mSphere.00534-17}, author = {Subramanian, Gowtham}, editor = {Belekar, Meenakshi A.} } @article {45382, title = {Tau protein squired by molecular chaperones during alzheimer{\textquoteright}s disease}, journal = {Journal of Molecular Neuroscience}, volume = {66}, year = {2018}, month = {NOV}, pages = { 356-368}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a neurodegenerative disorder characterized by progressive neuronal loss, caused by misfolding and accumulation of tau and Amyloid -42. Cellular mechanisms involving phosphatases, chaperones, ubiquitin proteasome system (UPS) and aggresomes solubilize or remove these toxic aggregates. Chaperones such as Hsp70 and Hsp90 functions in folding tau to its native form or in the downstream degrade and eliminated tau from the cell. Chaperones are involved in lysosomal degradation of tau by a process called chaperone mediated autophagy (CMA). In pathological conditions, chaperones fail to remove the toxic tau species, leading to their accumulation. In this scenario, inhibiting the chaperone activity would aid in overcoming AD. Small molecules inhibitors against chaperone activity are known to be effective in the clearance of aberrant tau from cell. In this review, the aspects of inhibition and prevention of tau aggregates formation are discussed in terms of chaperone activity and their small molecule modulators.

}, issn = { 0895-8696}, doi = { 10.1007/s12031-018-1174-3}, author = {Gorantla, Nalini Vijay and Chinnathambi, Subashchandrabose} } @article {45441, title = {Transport properties of cuinte2 thin films obtained by the electrochemical route}, journal = {Journal of electronic materials}, volume = { 47}, year = {2018}, month = {DEC}, pages = {7099-7105}, type = {Article}, abstract = {uInTe2 (CIT) thin films were potentiostatically electrodeposited onto cadmium sulfide thin films coated on fluorine doped tin oxide (FTO) glass in an aqueous bath at 75 degrees C by the standard three-electrode system at -0.7 V and -0.8 V, with respect to an Ag/AgCl reference electrode. The electrodeposited layers were heat treated at similar to 80 degrees C in air ambient for 60 min. X-ray diffraction pattern and Raman analysis confirmed the formation of chalcopyrite CIT thin films upon heat treatment. The optical band gap of heat treated CIT films was found to be similar to 1.0 eV and 0.95 eV deposited at -0.7 V and -0.8 V, respectively. Compact and good adhesive growth of CIT layers onto CdS coated FTO substrates is confirmed by field emission scanning electron microscopy. The current density-voltage (J-V) and capacitance-voltage (C-V) measurement was studied to understand the electronic quality of material for development of CIT layers for solar cell applications. The current density was found to be increased by two orders of magnitude upon low-temperature heat treatment. The capacitance-voltage measurement showed sharp depletion and accumulation region. The built in potential was found to be similar to 60 mV and 145 mV in the as-deposited samples, deposited at -0.7 V and -0.8 V, respectively, whereas upon heat treatment it shifted to 159 mV and 210 mV. The capacitance of the CIT films was found to be a function of applied bias and increased with increasing the bias voltage. The depletion width of the heat treated sample was found to be similar to 20 nm and 200 nm for the sample deposited at -0.7 V and -0.8 V, respectively. Thus, the sample deposited at -0.8 V shows optimum electronic properties and is found to be suitable for opto-electronic applications.}, issn = {0361-5235}, doi = { 10.1007/s11664-018-6640-8}, author = {Lakhe, Manorama G. and Chaure, Nandu B.} } @article {44625, title = {Triazole-diindolylmethane conjugates as new antitubercular agents: synthesis, bioevaluation, and molecular docking}, journal = {MedChemComm}, volume = {9}, year = {2018}, month = {JUL }, pages = {1114-1130}, abstract = {

We describe the synthesis of novel triazole-incorporated diindolylmethanes (DIMs) using a molecular hybridization approach. The in vitro antitubercular activity of the DIMs against Mycobacterium tuberculosis H37Ra (ATCC 25177) was tested in the active and dormant state. Among all the synthesized conjugates, the compounds 6b, 6f, 6l, 6n, 6q, 6r, and 6s displayed good antitubercular activity against both the active and dormant Mtb H37Ra strain. The compound 6l exhibited good antitubercular activity against dormant Mtb H37Ra with an IC50 value of 1 g mL(-1) and IC90 (MIC) value of 3 g mL(-1). The compounds 6b, 6l, and 6r displayed good antitubercular activity against active Mtb H37Ra with IC50 values of 2.19, 1.52, and 0.22 g mL(-1), respectively. The compounds 6b, 6h, 6l, and 6s displayed more than 70\% inhibition against the Gram-positive Bacillus subtilus strain at 3 g mL(-1). The molecular docking study showed the binding modes of the titled compounds in the active site of the DprE1 enzyme and assisted with elucidating a structural basis for the inhibition of Mycobacteria.

}, issn = {2040-2503}, doi = {10.1039/c8md00055g}, author = {Danne, Ashruba B. and Choudhari, Amit S. and Chakraborty, Shakti and Sarkar, Dhiman and Khedkar, Vijay M. and Shingate, Bapurao B.} } @article {44467, title = {Triflic acid-catalyzed metal-free synthesis of (E)-2-cyanoacrylamides and 3-substituted azetidine-2,4-diones}, journal = {New Journal of Chemistry}, volume = {42}, year = {2018}, month = {MAR}, pages = {6433-6440}, type = {Journal Article}, abstract = {

A TfOH-catalyzed highly efficient synthesis of biologically active (E)-2-cyanoacrylamides and 3-substituted azetidine-2,4-diones has been reported with 64{\textendash}94\% yields under metal-free conditions. The reaction proceeds through sequential Knoevenagel condensation/stereoselective in situ monohydration of nitrile or C{\textendash}N cyclization protocol in one-pot. The attractive features of this tandem process are moderate reaction conditions, high atom economy, broad substrate scope, gram-scale reaction and ease of operation.

}, doi = {10.1039/C7NJ05169G}, author = {Rupanwar, Bapurao D. and Chavan, Santosh S. and Shelke, Anil M. and Suryavanshi, Gurunath M.} } @article {44447, title = {Tuning the dimensionality of layered Srn+1Tin-xNixO3n+1 perovskite structures for improved activity in syngas generation}, journal = {Journal of Catalysis}, volume = {360}, year = {2018}, month = {APR }, pages = {27-39}, type = {Journal Article}, abstract = {

Interest in perovskite type oxides is growing due to their versatile catalytic applications. A series of Ruddlesden-Popper (RP) type layered perovskite oxides Srn+1Tin-xNixO3n+1 were prepared and evaluated for their catalytic activity in steam reforming, CO2 reforming and bi-reforming of methane. These materials, prepared through citrate gel method were characterized to understand their structure and Ni reducibility. Substitution of Ni in RP phases was established through refinement of XRD powder pattern. During methane reforming, the catalytic activity increased with the order of RP phase of SrTi1-xNixO3-δ (n = $\infty$). TPR results show variation in Ni reducibility with the order of RP phase, while TPD-O2 study helped to estimate oxygen vacancies. These vacancies seem to influence catalytic activity during methane reforming. Transient pulse experiments show that CO2 dissociates over oxygen vacancies to give CO and oxygen, with later replenishing lattice oxygen in SrTi0.8Ni0.2O3-δ (n = $\infty$) phases. Highly labile oxygen vacancies generated in the bulk of SrTi0.8Ni0.2O3-δ must be migrating to the surface, helping in the removal of coke formed. Characterization of catalysts after reaction helped in better understanding of coke precursors.

}, keywords = {Dry reforming, NickelSyngas, Ruddlesden-Popper (RP) perovskites, Steam reforming}, issn = {219517}, doi = {10.1016/j.jcat.2018.01.015}, author = {Dama, Srikanth}, editor = {Ghodke, Seema} } @article {44375, title = {Ultrastable imine-based covalent organic frameworks for sulfuric acid recovery: an effect of interlayer hydrogen bonding}, journal = {Angewandte Chemie-International Edition}, volume = {57}, year = {2018}, month = {MAY}, pages = {5797-5802}, abstract = {A rapid and scalable synthesis of six new imine-linked highly porous and crystalline COFs is presented that feature exceptionally high chemical stability in harsh environments including conc. H2SO4 (18M), conc. HCl (12M), and NaOH (9M). This is because of the presence of strong interlayer C-H center dot center dot center dot N hydrogen bonding among the individual layers, which provides significant steric hindrance and a hydrophobic environment around the imine (-C=N-) bonds, thus preventing their hydrolysis in such an abrasive environment. These COFs were further converted into porous, crystalline, self-standing, and crack-free COF membranes (COFMs) with extremely high chemical stability for their potential applications for sulfuric acid recovery. The as-synthesized COFMs exhibit unprecedented permeance for acetonitrile (280 Lm(-2) h(-1) bar(-1)) and acetone (260 Lm(-2) h(-1) bar(-1)).}, doi = {10.1002/anie.201802220}, author = {Halder, Arjun and Karak, Suvendu and Addicoat, Matthew and Bera, Saibal and Chakraborty, Amit and Kunjattu, Shebeeb H. and Pachfule, Pradip and Heine, Thomas and Banerjee, Rahul} } @article {45429, title = {Understanding conformational dynamics of complex lipid mixtures relevant to biology}, journal = {Journal of membrane biology}, volume = {251}, year = {2018}, month = {DEC}, pages = {609-631}, type = {Article}, abstract = {This is a perspective article entitled "Frontiers in computational biophysics: understanding conformational dynamics of complex lipid mixtures relevant to biology" which is following a CECAM meeting with the same name.}, issn = {0022-2631 }, doi = {10.1007/s00232-018-0050-y}, author = {Friedman, Ran and Khalid, Syma and Aponte-Santamaria, Camilo and Arutyunova, Elena and Becker, Marlon and Boyd, Kevin J. and Christensen, Mikkel and Coimbra, Joao T. S. and Concilio, Simona and Daday, Csaba and van Eerden, Floris J. and Fernandes, Pedro A. and Graeter, Frauke and Hakobyan, Davit and Heuer, Andreas and Karathanou, Konstantina and Keller, Fabian and Lemieux, M. Joanne and Marrink, Siewert J. and May, Eric R. and Mazumdar, Antara and Naftalin, Richard and Pickholz, Monica and Piotto, Stefano and Pohl, Peter and Quinn, Peter and Ramos, Maria J. and Schiott, Birgit and Sengupta, Durba and Sessa, Lucia and Vanni, Stefano and Zeppelin, Talia and Zoni, Valeria and Bondar, Ana-Nicoleta and Domene, Carmen} } @article {44623, title = {Visible light mediated desilylative C(sp(2))-C(sp(2)) cross-coupling reactions of arylsilanes with aryldiazonium salts under Au(i)/Au(iii) catalysis}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {JUL}, pages = {7223-7226}, abstract = {

Desilylative C(sp(2))-C(sp(2)) cross-coupling reactions of arylsilanes with aryldiazonium salts under Au(i)/photoredox catalysis have been reported. The addition of Cu-salts as catalysts was found to be crucial for the success of this transformation.

}, issn = {1359-7345}, doi = {10.1039/c8cc03925a}, author = {Chakrabarty, Indradweep and Akram, Manjur O. and Biswas, Suprakash and Patil, Nitin T.} } @article {45449, title = {Water-in-acid gel polymer electrolyte realized through a phosphoric acid-enriched polyelectrolyte matrix toward solid-state supercapacitors}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {6}, year = {2018}, month = {OCT}, pages = {12630-12640}, type = {Article}, abstract = {A new concept of water-in-acid gel polymer electrolytes (GPEs) is introduced. The simple and scalable UV-light-assisted synthesis of a copolymer matrix possessing polyelectrolyte behavior, followed by swelling in minimally diluted H3PO4 (15.1 M/88 wt \% aqueous solution), effects formation of a high proton-conducting, self-standing, and mechanically stable polyelectrolyte GPE (PGPE). Retention of high mechanical stability despite the presence of a large amount of liquid species makes it a promising candidate for replacing conventional GPEs. The high proton conductivity (9.8 X 10(-2) S cm(-1)) of the PGPE at an ambient temperature of 303 K is attributed to the high concentration of the conducting species present in the polymer matrix. The PGPE-based polyaniline (PANI) supercapacitor device (PANI-1) with a mass loading of 1 mg cm(-2) exhibits a high specific gravimetric capacitance of 385 F g(-1) at a current density of 0.25 mA cm(-2). At the same current density, the PANI-5 device retains high gravimetric and areal capacitance values of 258 F g(-1) and 1288 mF cm(-2), respectively. The low equivalent series resistance value of 0.78 Omega (for the PANI-5 device) further proves the excellent electrode-electrolyte interface formed by the water-in-acid GPE. A 100\% capacitance retention even after 9000 continuous charge-discharge cycles strongly indicates the feasibility of adopting water-in-acid GPEs in future supercapacitors.}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.8b01175}, author = {Vijayakumar, Vidyanand and Ghosh, Meena and Torris, Arun A. T. and Chandran, Nikhil M. K. and Nair, Sanoop B. and Badiger, Manohar V. and Kurungot, Sreekumar} } @article {46324, title = {Access to a stereoisomer library of solomonamide macrocycles}, journal = {Chemistry-An Asian Journal}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

In an attempt towards understanding stereo-structure activity relationships (SSARs), we have prepared eight possible stereoisomers of solomonamide macrocycles, in particular, by changing the stereochemical pattern of non-peptide fragment AHMOA. Here, we have demonstrated different ways to construct three contiguous chiral centers present in solomonamide B macrocycle using substrate/reagent-controlled methods. These methods involve Brown crotylation, NHK reaction and Evans aldol addition as key steps to synthesize key non-peptide fragment. Further, these non-peptide fragments were converted to their corresponding macrocycles via ligand-free intramolecular Heck reaction.

}, keywords = {Crotylation, Heck reaction, Inflammation, Macrocycles, Stereochemistry}, issn = {1861-4728}, doi = {10.1002/asia.201901075}, author = {Jachak, Gorakhnath R. and Athawale, Paresh R. and Choudhury, Rahul and Kashinath, K. and Reddy, D. Srinivasa} } @article {45571, title = {Additive manufacturing technology empowered complex electromechanical energy conversion devices and transformers}, journal = {Applied Materials Today}, volume = {14}, year = {2019}, month = {MAR}, pages = {35-50}, type = {Article}, abstract = {Additive manufacturing technology (AMT) is popularly known as 3-dimensional (3D) printing has emerged as a reliable, efficient, and cost-effective method for the production of complex 3D-physical models. Effectively coordinated advanced 3D printing technological developments as well as the advanced integrated techniques with pre-existed 2-dimensional (2D) printing techniques have expedited the expansion of this technology to various applications in wide-field disciplines. In this paper, we aim to provide principles of machines and transformers; a comprehensive overview of additive printing technology, process, and the AMT facilitated compatible materials for empowered complex electromechanical energy conversion devices and transformers. Electromechanical energy conversion devices and transformers supply most of the electricity to all applications. Hence, we have provided an informative report broadcasting of additively manufactured electromechanical devices and transformers with significant utilization in electrical power industries. Additionally, AMT advances in electromechanical energy conversion devices such as electrical machines (motors, generators, and transformers) were described. Also, the traditional methods induced complexities overcoming AMT technique and their advantages were elucidated. Thus the additive manufacturing technology is acceptable for fabricating complex electromechanical devices and transformers additionally acquiring the performance, reliability, and cost-effectiveness of the same. Moreover, the current body of research in 3D printed manufacturing is summarized, and the challenges are highlighted to assist in the further development of this field.}, doi = {10.1016/j.apmt.2018.11.004}, author = {Magisetty, R. and Cheekuramelli, N. S.} } @article {45508, title = {Adsorptive removal of chromium(VI) using spherical resorcinol-formaldehyde beads prepared by inverse suspension polymerization}, journal = { Journal of Polymer Research}, volume = {26}, year = {2019}, month = {JAN }, pages = {41}, type = {Article}, abstract = {

The spherical cross-linked beaded polymers were prepared by condensation of resorcinol and formaldehyde in presence of tri-ethylamine by inverse suspension polymerization technique. The m-cresol, aniline, urea and thiourea were used as co-monomer and polyethylene glycol (PEG 400) was used as porogen. Paraffin oil was used as non-aqueous suspension agent. The polymeric spherical beads were prepared using various types of comonomers exhibiting range of particle size 77.62 to 158.84m at 90 degrees C and 300rpm for 4h. The resulting beads were analyzed by elemental analysis, particle size analysis and scanning electron microscope (SEM). The synthesized beads were used for the removal of Cr(VI) from aqueous solutions. A simple and sensitive solid phase extraction procedure was used for the determination of chromium at trace level by spectrophotometric method using 1,5-diphenylcarbazide reagent. The adsorption of Cr(VI) on the resorcinol-formaldehyde beads was monitored by energy-dispersive X-ray spectroscopy (EDX) analysis. The metal adsorption parameters such as contact time, pH, metal ion concentration and adsorbent dose were investigated. For Cr(VI), the maximum adsorption capacity was about 99\% at pH2 for the resorcinol-formaldehyde beads obtained.

}, keywords = {adsorption kinetics, Beads, Chromium (VI), Formaldehyde, Inverse suspension, Resorcinol}, issn = {1022-9760}, doi = {10.1007/s10965-019-1705-9}, author = {Mulani, Khudbudin and Patil, Vishwanath and Chavan, Nayaku and Donde, Kamini} } @article {46155, title = {Adsorptive removal of strontium(II) using macroporous poly(AGE-co-EGDMA) beads modified with resorcin[4]arene}, journal = {Bulletin of Materials Science}, volume = {42}, year = {2019}, month = {APR}, pages = {UNSP 82}, type = {Article}, abstract = {

Adsorption behaviour of strontium(II) on macroporous poly(allyl glycidyl methacrylate-co-ethylene glycol dimethacrylate) [poly(AGE-co-EGDMA)] beads modified with resorcin[4]arene was studied using macroporous cross-linked [poly(AGE-co-EGDMA)] beads. The macroporous crosslinked [poly(AGE-co-EGDMA)] beads were synthesized by suspension polymerization techniques, followed by functionalization with amino derivatives of resorcin[4]arene. The poly(AGE-co-EGDMA) beads were characterized by FTIR, 1H and 13C-NMR, elemental analysis and particle-size analysis. The surface morphology of beads was studied by scanning electron microscopy. The functionalized poly(AGE-co-EGDMA) beads were used as adsorbents for strontium removal. The crucial factors including the effect of pH, time, initial concentration of metal ions and adsorbent dose were investigated to optimize the maximum adsorption efficiency of Sr(II). The equilibrium data of strontium(II) ions adsorbed on functionalized poly(AGE-co-EGDMA) beads were analysed by pseudo-first- and pseudo-second-order kinetic models. The pseudo-second-order kinetic model indicated that strontium was adsorbed by chemisorption.

}, keywords = {Adsorption, AGE-EGDMA beads, resorcin[4]arene, Sr(II)}, issn = {0250-4707}, doi = {10.1007/s12034-019-1786-4}, author = {Mulani, K. and Patil, V. and Chavan, N. and Donde, K.} } @article {46326, title = {Ag nanoparticles supported on a resorcinol-phenylenediamine-based covalent organic framework for chemical fixation of CO2}, journal = {Chemistry-An Asian Journal }, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

Covalent organic frameworks are a new class of crystalline organic polymers possessing a high surface area and ordered pores. Judicious selection of building blocks leads to strategic heteroatom inclusion into the COF structure. Owing to their high surface area, exceptional stability and molecular tunability, COFs are adopted for various potential applications. The heteroatoms lining in the pores of COF favor synergistic host-guest interaction to enhance a targeted property. In this report, we have synthesized a resorcinol-phenylenediamine-based COF which selectively adsorbs CO2 into its micropores (12 angstrom). The heat of adsorption value (32 kJ mol(-1)) obtained from the virial model at zero-loading of CO2 indicates its favorable interaction with the framework. Furthermore, we have anchored small-sized Ag nanoparticles (approximate to 4-5 nm) on the COF and used the composite for chemical fixation of CO2 to alkylidene cyclic carbonates by reacting with propargyl alcohols under ambient conditions. Ag@COF catalyzes the reaction selectively with an excellent yield of 90 \%. Recyclability of the catalyst has been demonstrated up to five consecutive cycles. The post-catalysis characterizations reveal the integrity of the catalyst even after five reaction cycles. This study emphasizes the ability of COF for simultaneous adsorption and chemical fixation of CO2 into corresponding cyclic carbonates.

}, keywords = {CO2 capture, covalent organic frameworks, cyclic carbonates, Propargyl alcohols, silver nanoparticles}, issn = {1861-4728}, doi = {10.1002/asia.201901157}, author = {Chakraborty, Debanjan and Shekhar, Pragalbh and Singh, Himan Dev and Kushwaha, Rinku and Vinod, C. P. and Vaidhyanathan, Ramanathan} } @article {46050, title = {AgQDs employing black box synthetic strategy: photocatalytic and biological behavior}, journal = {Journal of Luminescence}, volume = {212}, year = {2019}, month = {AUG}, pages = {133-140}, type = {Article}, abstract = {

This investigation relates FRET, photocatalytic and a biological study of AgQDs which found to be dependent on particle size and capping agent used. Surface of AgQDs was one of the most important factors that govern its activity. AgQDs with BSA binding was systematically studied by fluorescence quenching and electrostatic interaction. AgQDs mainly interacted to site II of BSA, binding distance r evaluated according to the FRET theory and was 4.6 nm for AgQDs, which suggested transfer of energy (non-radioactive) between surface modified AgQDs and biological molecule BSA. The photocatalytic activity of AgQDs for the appreciable degradation of erythrosine dye using Ultraviolet-B light was investigated. AgQDs showed specific antibacterial activity against E. coli bacterial stain. Quantum dots displayed a pronounced and specific activity causing \> 50\% growth of COLO-205 and MCF-7 human cancer Cells at concentrations \< 10(-7 )M. Hence, present black box synthetic protocol of AgQDs could be life science application.

}, keywords = {AgQDs, Black box, COLO-205, Photocatalytic}, issn = {0022-2313}, doi = {10.1016/j.jlumin.2019.04.014}, author = {Pansare, Amol V. and Shedge, Amol A. and Chhatre, Shraddha Y. and Das, Debabrata and Murkute, Punam and Pansare, Shubham V. and Nagarkar, Amit A. and Patil, Vishwnath R. and Chakrabarti, S.} } @article {46106, title = {Amphiphilic polypyridyl ruthenium complexes: synthesis, characterization and aggregation studies}, journal = {Polyhedron}, volume = {164}, year = {2019}, month = {MAY }, pages = {96-107}, type = {Article}, abstract = {

{Synthesis and characterization of five amphiphilic ruthenium(11) complexes of the type [Ru(Cn)(3)]center dot(PF6)(2) (Cn = 4,4{\textquoteright}-dialkyl-2,2{\textquoteright}-bipyridine

}, keywords = {2, 2 {\textquoteleft}-bipyridine, Aggregation, Amphiphilic ligand, Metallosurfactant, Ruthenium complexes}, issn = {0277-5387}, doi = {10.1016/j.poly.2019.02.035}, author = {Bhand, Sujit and Lande, Dipali N. and Pereira, Eulalia and Gejji, Shridhar P. and Weyhermueller, Thomas and Chakravarty, Debamitra and Puranik, Vedavati G. and Salunke-Gawali, Sunita} } @article {47176, title = {Aqueous-phase differentiation and speciation of Fe3+ and Fe2+ using water-stable photoluminescent lanthanide-based metal-organic framework}, journal = {ACS Applied Nano Materials}, volume = {2}, year = {2019}, month = {AUG}, pages = {5169-5178}, type = {Article}, abstract = {

Fe2+ is vital to O-2 transportation and photosynthesis regulated by oxidases and reductases. On the other hand, Fe3+ is detrimental due to its irreversible binding to O-2. Hence there is a need for selective identification of Fe3+ from aqueous systems in the presence of Fe2+. However, given their close chemical nature, it is not straightforward to differentiate them. Fe2+ and Fe3+ are typically sensed and differentiated using magnetic measurements, Mossbauer, X-ray absorption spectroscopy, or EXAFS, which are complex and equipment intensive techniques. In comparison, the fluorescence technique is advantageous in terms of time and accessibility. Although readily available lanthanide salts exhibit fluorescence, they are weak, and to serve as an optical probe, their luminescence has to be enhanced via ligand design. Hence we have designed a chromophoric ligand that can covalently bind to lanthanides and enhance its fluorescence intensity, and it binds selectively to Fe3+ through its nitrogen centers. It detects Fe3+ from low concentration (similar to 100 mu M) aqueous solutions, with fast response time (\<1 min) and with a detection limit of 3.6 ppm. Importantly, the Fe3+ adsorbed MOF can be readily reactivated for the next cycle by merely washing with an aqueous ascorbic acid solution and can be used for multiple cycles without any appreciable loss in activity. This makes the Ln-MOF an environmentally benign, cost-effective, scalable, and recyclable probe.

}, keywords = {Fe3+ differentiation and speciation, flexible ligand, fluorescent MOF, iron speciation, Metal-organic framework, water sorption}, issn = {2574-0970}, doi = {10.1021/acsanm.9b01047}, author = {Maity, Rahul and Chakraborty, Debanjan and Nandi, Shyamapada and Yadav, Ankit Kumar and Mullangi, Dinesh and Vinod, C. P. and Vaidhyanathan, Ramanathan} } @article {45583, title = {Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: synthesis, characterization and gas permeation study}, journal = {Journal of Macromolecular Science, Part A: Pure and Applied Chemistry}, volume = {56}, year = {2019}, month = {FEB}, pages = {136-145}, type = {Article}, abstract = {

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430 g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10\% weight loss temperatures and glass transition temperatures of polyesters were in the range 453{\textendash}485 {\textdegree}C and 201{\textendash}267 {\textdegree}C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H2 and N2 by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.

}, doi = {10.1080/10601325.2018.1549950}, author = {Shingte, R. D. and Chatterjee, D. and Tawade, B. V. and Shrimant, B. and Wadgaonkar, P.P.} } @article {47164, title = {Baicalein suppresses repeat tau fibrillization by sequestering oligomers}, journal = {Archives of Biochemistry and Biophysics}, volume = {675}, year = {2019}, month = {OCT}, pages = {108119}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a neurodegenerative disorder caused by protein misfolding, aggregation and accumulation in the brain. A large number of molecules are being screened against these pathogenic proteins but the focus for therapeutics is shifting towards the natural compounds as aggregation inhibitors, mainly due to their minimum adverse effects. Baicalein is a natural compound belonging to the class of flavonoids isolated from the Chinese herb Scutellaria baicalensis. Here we applied fluorescence, absorbance, microscopy, MALDI-TOF spectrophotometry and other biochemical techniques to investigate the interaction between Tau and Baicalein in vitro. We found the aggregation inhibitory properties of Baicalein for the repeat Tau. Overall, the potential of Baicalein in dissolving the preformed Tau oligomers as well as mature fibrils can be of utmost importance in therapeutics for Alzheimer{\textquoteright}s disease.

}, keywords = {Alzheimer disease, Baicalein, Microtubule assembly, Paired helical filaments, Protein aggregation, tau protein}, issn = {0003-9861}, doi = {10.1016/j.abb.2019.108119}, author = {Sonawane, Shweta Kishor and Balmik, Abhishek Ankur and Boral, Debjyoti and Ramasamy, Sureshkumar and Chinnathambi, Subashchandrabose} } @article {46076, title = {Bentonite - Clay - supported cuprous iodide nanoparticles (BENT- CuI NPs): a new heterogeneous catalyst in diversity - oriented synthesis of 1, 2, 3-triazoles in aqueous medium}, journal = {Chemistryselect}, volume = {4}, year = {2019}, month = {JUN }, pages = {7144-7150}, type = {Article}, abstract = {

Bentonite clay supported cuprous iodide nanoparticles (BENT-CuI NPs) were prepared and demonstrated for the first time as an efficient heterogeneous catalyst in diversity oriented, green synthesis of 1,2,3-triazoles by one-pot, three component reaction between alkyl halides, arylboronic acids, or epoxides with alkynes and sodium azide in aqueous medium. The catalyst was characterized by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), Energy Dispersive X-ray Spectroscopy(EDS), Scanning Electron Microscopy (SEM), X-Ray Powder Diffraction (XRD), Transmission Electron Microscopy (TEM) as well as Brunauer-Emmett-Teller (BET) techniques and was found to be reusable for five consecutive runs without significant loss of activity.

}, keywords = {1, 2, 3-triazoles, arylboronic acids, click synthesis, epoxides, green chemistry, heterogeneous catalyst}, issn = {2365-6549}, doi = {10.1002/slct.201900421}, author = {Chavan, V, Pramod and Charate, Shrinivas P. and Desai, V, Uday and Rode, V, Chandrashekhar and Wadgaonkar, Prakash P.} } @article {45563, title = {Biosynthesized Co-doped TiO2 nanoparticles based anode for lithium-ion battery application and investigating the influence of dopant concentrations on its performance}, journal = {Composites Part B: Engineering}, volume = {167}, year = {2019}, month = {JUN}, pages = {44-50}, type = {Article}, abstract = {TiO2 is a good alternative anode material for lithium-ion battery application because of its incomparable high structural stability and safety during the charge/discharge cycles. However, the low intrinsic conductivity of TiO2 has been a limiting factor affecting its cycling and rate capability performance. Here in this work, we present Co-doped TiO2 nanoparticles based anode with good reversibility, cycling stability and rate capability performance for its envisaged application in lithium-ion battery. The Co-doped TiO2 nanoparticles with different Co concentrations (3\%, 5\%, and 7\%) are synthesized using simple and economic biomediated green approach, wherein TiCl4 and Co precursors are allowed to react in Bengal gram bean extract containing biomolecules which act as natural capping agents to control the size of nanoparticles. Among the pure TiO2 and different Co-doped TiO2 samples, the 7\% Co-doped TiO2 anode show the highest capacity of 167 mAh g-1 (88.3\%) after 100 cycles at the 0.5C current density. The Co-doped TiO2 shows higher and stable coulombic efficiency up to 100 GCD cycles indicating good reversibility. Based on the results, it is expected that the Co-doped TiO2 nanoparticles might be contributing to the enhanced electronic conductivity providing an efficient pathway for fast electron transfer.}, doi = {10.1016/j.compositesb.2018.12.001}, author = {Kashale, A. A. and Rasal, A. S. and Kamble, G. P. and Ingole, V. H. and Dwivedi, P. K. and Rajoba, S. J. and Jadhav, L. D. and Ling, Y. C. and Chang, J. Y. and Ghule, A. V.} } @article {46294, title = {Carbon derived from soft pyrolysis of a covalent organic framework as a support for small-sized RuO2 showing exceptionally low overpotential for oxygen evolution reaction}, journal = {ACS Omega}, volume = {4}, year = {2019}, month = {AUG}, pages = {13465-13473}, type = {Article}, abstract = {

Electrochemical water splitting is the most energy-efficient technique for producing hydrogen and oxygen, the two valuable gases. However, it is limited by the slow kinetics of the anodic oxygen evolution reaction (OER), which can be improved using catalysts. Covalent organic framework (COF)-derived porous carbon can serve as an excellent catalyst support. Here, we report high electrocatalytic activity of two composites, formed by supporting RuO2 on carbon derived from two COFs with closely related structures. These composites catalyze oxygen evolution from alkaline media with overpotentials as low as 210 and 217 mV at 10 mA/cm(2), respectively. The Tafel slopes of these catalysts (65 and 67 mV/dec) indicate fast kinetics compared to commercial RuO2. The observed activity is the highest among all RuO2-based heterogeneous OER catalysts-a touted benchmark OER catalyst. The high catalytic activity arises from the extremely small-sized (similar to 3-4 nm) RuO2 nanoparticles homogeneously dispersed in a micro-mesoporous (BET = 517 m(2)/g) COF-derived carbon. The porous graphenic carbon favors mass transfer, while its N-rich framework anchors the catalytic nanoparticles, making it highly stable and recyclable. Crucially, the soft pyrolysis of the COF enables the formation of porous carbon and simultaneous growth of small RuO2 particles without aggregation.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b01777}, author = {Chakraborty, Debanjan and Nandi, Shyamapada and Illathvalappil, Rajith and Mullangi, Dinesh and Maity, Rahul and Singh, Santosh K. and Haldar, Sattwick and Vinod, Chathakudath P. and Kurungot, Sreekumar and Vaidhyanathan, Ramanathan} } @article {45488, title = {CFD modelling of almond drying in a tray dryer}, journal = {Canadian Journal of Chemical Engineering}, volume = {97}, year = {2019}, month = {FEB}, pages = {560-572}, type = {Article}, abstract = {

Drying is important in many food processing applications, and particularly so in the dry fruits industry. This work is focused on developing computational models for simulating the drying of almonds in a tray dryer. It is important to quantitatively understand heat and mass transfer within and around a single almond particle as well as the particle-particle interactions and their implications for dryer design. In this work, we have developed a systematic CFD modelling framework for modelling almond drying in a tray dryer. A single tray filled with almonds (similar to 2 kg) were dried at three set temperatures viz., 55, 65, and 75 degrees C. Air relative humidity at the inlet and outlet locations, and the weight of almonds were measured during drying for each experiment. An additional set of experiments were conducted in which almonds were filled only in the half section of the tray, keeping the other half empty. The same amount of almonds were used, to have multiple layers of almonds in the tray, and the set temperature for the experiment was 75 degrees C. Flow, heat, and mass transfer in the tray dryer were simulated using commercial CFD software Ansys Fluent. The validated computational model was used to simulate various cases including larger and more trays. The developed approach and models will be useful to select the appropriate dryer configuration and optimize its design. The developed models will also be useful to identify suitable operation conditions for the drying of almonds as well as other food products.

}, keywords = {Almonds, CFD, Drying, scale-up, tray dryer}, issn = {0008-4034}, doi = {10.1002/cjce.23357}, author = {Chilka, Amarvir G. and Ranade, Vivek V.} } @article {46204, title = {Charge transfer liquid: a stable donor-acceptor interaction in the solvent-free liquid state}, journal = {Chemical Communications}, volume = {55}, year = {2019}, month = {AUG}, pages = {9371-9374}, type = {Article}, abstract = {

Charge-transfer complexes have been an inspiration to develop many functional soft materials. However, most of those studies have focused on solution based assemblies wherein the explicit control of solvents and their polarity are crucial. In this context, we explore an efficient and stable charge transfer liquid using a solvent-free liquid dialkoxynaphthalene donor and a naphthalenediimide acceptor. It has been observed that irrespective of the donor-acceptor ratio, the charge-transfer liquid exhibited an unprecedented stability and retained characteristic features even at increased temperatures. The underlying intermolecular interactions leading to efficient CT have been examined by NMR techniques together with theoretical modelling studies. The concept of charge transfer liquid will be highly beneficial for the development of processable optoelectronically active materials.

}, doi = {10.1039/c9cc03671g}, author = {Wakchaure, Vivek Chandrakant and Pillai, Lekshmi, V and Goudappagouda and Ranjeesh, Kayaramkodath Chandran and Chakrabarty, Suman and Ravindranathan, Sapna and Rajamohanan, Pattuparambil R and Babu, Sukumaran Santhosh} } @article {46154, title = {Click chemistry based multicomponent approach in the synthesis of spirochromenocarbazole tethered 1,2,3-triazoles as potential anticancer agents}, journal = {Bioorganic Chemistry}, volume = {85}, year = {2019}, month = {APR}, pages = {475-486}, type = {Article}, abstract = {

A series of spirochromenocarbazole tethered 1,2,3-triazoles were synthesized via click chemistry based one-pot, five component reaction between N-propargyl isatins, malononitrile, 4-hydroxycarbazole, aralkyl halides and sodium azide using cellulose supported CuI nanoparticles (Cell-CuI NPs) as the heterogeneous catalyst. Antiproliferative activity of all the synthesized compounds was investigated against panel of cancer cell lines such as MCF-7, MDA-MB-231, HeLa, PANG-1, A-549, and THP-1. Many of the synthesized compounds exhibited good anti-proliferative activity against breast (MCF-7 and MDA-MB-231) and cervical (HeLa) cancer cells with IC50 values less than 10 mu M. In case of MCF-7 cells, among the nine compounds that showed good anti-proliferative activity, compounds 6f and 6j were found to be highly potent (IC50 , = 2.13 mu M and 4.80 mu M, respectively). In case of MDA-MB-231, three compounds (6k, 6j and 6s) showed antiproliferative activity amongst which 6k was the most potent one (IC50 = 3.78 mu M). On the other hand, in cervical cancer HeLa cells, compounds 6b, 6g, 6s and 6u showed excellent antiproliferative activity (IC50 = 4.05, 3.54, 3.83, 3.35 mu M, respectively). All the compounds were found to be nontoxic to the human umbilical vein endothelial cells (HUVECs). AO and EtBr staining and fluorescence microscopy studies of the active compounds (IC50 \< 5 mu M) suggested that these compounds induce cell death by apoptosis.

}, keywords = {1, 2, 3-Triazolylspirochromenocarbazole, Anticancer, Apoptotic assay, Click chemistry, Cytotoxicity, heterogeneous catalysis, Multicomponent synthesis}, issn = {0045-2068}, doi = {10.1016/j.bioorg.2019.01.070}, author = {Chavan, V, Pramod and Desai, V, Uday and Wadgaonkar, Prakash P. and Tapase, Savita R. and Kodam, Kisan M. and Choudhari, Amit and Sarkar, Dhiman} } @article {46268, title = {Co amorphous valsartan nifedipine system: Preparation, characterization, in vitro and in vivo evaluation}, journal = {European Journal of Pharmaceutical Sciences}, volume = {139}, year = {2019}, month = {NOV}, type = {Article}, abstract = {

Co amorphous systems are supersaturated drug delivery systems which offer a basic platform for delivery of multicomponent adducts (combination of more than one active pharmaceutical ingredient (API)) and/or as a fixed dose combination therapy, in addition to their potential to improve the apparent solubility, dissolution rate and ultimately bioavailability of poorly water soluble APIs. In the present work, a new drug-drug co amorphous system namely valsartan-nifedipine was prepared by quench cooling technique. Prepared co amorphous system was characterized for its solid state behavior with the help of Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Powder X Ray Diffractometry (PXRD). The optimized co amorphous system was stable for 1 month when exposed to accelerated stability condition (40 +/- 2 degrees C and 75 +/- 5\% RH). The improved stability of amorphous nifedipine in co amorphous system was attributed to improved miscibility and intra and intermolecular non-covalent interactions mainly due to presence of hydrogen bonding between valsartan and nifedipine which was studied by FTIR analysis. Co amorphous systems were evaluated by mainly in vitro dissolution and in vivo benefit. In vitro dissolution study showed nearly 5.66 folds and 1.61 folds improvement which was translated to 3.63 and 2.19 times enhancement in vivo C-max for nifedipine and valsartan respectively.

}, doi = {10.1016/j.ejps.2019.105048}, author = {Lodagekar, Anurag and Chavan, Rahul B. and Mannava, M. K. Chaitanya and Yadav, Balvant and Chella, Naveen and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {45521, title = {Comparison of different water models for melting point calculation of methane hydrate using molecular dynamics simulations}, journal = {Chemical Physics}, volume = {516}, year = {2019}, month = {JAN }, pages = {6-14}, type = {Article}, abstract = {

Molecular dynamics simulation is a powerful tool to understand the gas hydrate nucleation, growth, and dissociation at molecular level. Prerequisite of super-cooling during gas hydrate formation and a certain degree of super-healing during melting shows significant hysteresis in the transition between solid and liquid state due to large nucleation barrier. Different water models quantitatively differ in their prediction of thermodynamic and kinetic properties of bulk water, including phase behaviour. The present work carries out a systematic investigation of the effect of the chosen water model on the phase behaviour, in particular, the decomposition of methane hydrate. Void-induced melting has been used to predict the melting point of methane hydrate using TIP4P/Ice, TIP4P/2005, TIP4P, and SPC/E water models. This method avoids the need for a predetermined interface for melting point calculations and thus may have its importance in identifying dissociation kinetics of bulk hydrate.

}, keywords = {decomposition, Gas hydrates, Void-induced melting, Water models}, issn = {0301-0104}, doi = {10.1016/j.chemphys.2018.08.036}, author = {Choudhary, Nilesh and Chakrabarty, Suman and Roy, Sudip and Kumar, Rajnish} } @article {46245, title = {Critical role of processing on the mechanical properties of cross-linked highly loaded nanocomposites }, journal = {Macromolecules}, volume = {52}, year = {2019}, pages = {5955-5962}, type = {Article}, abstract = {

Polymer nanocomposites are frequently not at equilibrium-therefore, the structure and properties critically depend on the protocol followed in their preparation. Here, we demonstrate that the elastic-brittle transition in highly loaded ice-templated polymer nanocomposites is sensitively determined by the conformation of polymer chains during nanocomposite preparation. Macroporous polymer nanocomposites are synthesized using two preparation pathways, both exhibiting minor modifications of the ice-templating method wherein an aqueous dispersion of nanoparticles, polymers, and cross-linkers is frozen. In one method, the matrix polymer is cross-linked in the presence of ice, whereas in the other method, the ice is removed by freeze-drying before the polymer is cross-linked. Although all measurable structural metrics are practically identical for the two composites, they exhibit qualitatively different mechanical properties. Nanocomposites cross-linked in the presence of ice show exceptional resilience, recovering elastically from large compression for very high nanoparticle loadings-in some instances, above 90\% by weight. Here, the critical particle loading for the elastic- brittle transition is dependent on the molecular weight of the polymer. In comparison, samples cross-linked after freeze-drying appear structurally identical but turn brittle at much lower particle loadings (about 60\% by weight), independent of the matrix polymer molecular weight. We rationalize these differences in terms of the conformational state of the polymer during cross- linking. In the former case, polymer chains are in good solvent during nanocomposite preparation, while after lyophilization, they are in a poor solvent. The large spatial extent of well-solvated chains and chain-chain overlap during cross-linking results in the formation of intermolecular cross-links, and we obtain elastic nanocomposites even at high nanoparticle loadings. In contrast, for chains in collapsed conformations in a bad solvent, chain connectivity during cross-linking is achieved only for much lower particle loadings. Our results reiterate that the sensitivity of polymer conformations to different processing methods can result in large differences in properties, even though their consequences on structural characteristics are effectively indistinguishable.

}, doi = {10.1021/acs.macromol.9b00813}, author = {Suresh, Karthika and Chowdhury, Arindam and Kumar, Sanat K. and Kumaraswamy, Guruswamy} } @article {46117, title = {Cu/Cu2O nanoparticles supported on a phenol-pyridyl COF as a heterogeneous catalyst for the synthesis of unsymmetrical diynes via glaser-hay coupling}, journal = {ACS Applied Materials \& Interfaces}, volume = {11}, year = {2019}, month = {MAY }, pages = {15670-15679}, type = {Article}, abstract = {

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers with a modular construct that favors fiinctionalization. COF pores can be used to grow nanoparticles (nPs) with dramatic size reduction, stabilize them as dispersions, and provide excellent nP access. Embedding substrate binding sites in COFs can generate host-guest synergy, leading to enhanced catalytic activity. In this report, Cu/Cu2O nPs (2-3 nm) are grown on a COF, which is built by linking a phenolic trialdehyde and a triamine through Schiff bonds. Their micropores restrict the nP to exceptionally small sizes (similar to 2-3 nm), and the pore walls decorated with strategically positioned hydrogen-bonding phenolic groups anchor the substrates via hydrogen-bonding, whereas the basic pyridyl sites serve as cationic species to stabilize the [CuclusterCl2](2-) type reactive intermediates. This composite catalyst shows high activity for Glaser-Hay heterocoupling reactions, an essential 1,3-diyne yielding reaction with widespread applicability in organic synthesis and material science. Despite their broad successes in homocoupled products, preparation of unsymmetrical 1,3-diynes is challenging due to poor selectivity. Here, our COF-based Cu catalyst shows elevated selectivity toward heterocoupling product(s) (Cu nP loading 0.0992 mol \%; turn over frequency: similar to 4S-50; turn over number: similar to 17S-190). The reversible redox activity at the Cu centers has been demonstrated by carrying out X-ray photoelectron spectroscopy on the frozen reactions, whereas the crucial interactions between the substrates and the binding sites in their optimized configurations have been modeled using density functional theory methods. This report emphasizes the utility of COFs in developing a heterogeneous catalyst for a truly challenging organic heterocoupling reaction.

}, keywords = {Copper nanoparticles, Covalent organic framework, Glaser-Hay heterocoupling, heterogeneous catalysis, unsymmetrical diynes}, issn = {1944-8244}, doi = {10.1021/acsami.9b02860}, author = {Chakraborty, Debanjan and Nandi, Shyamapada and Mullangi, Dinesh and Haldar, Sattwick and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article {46280, title = {Cyclic tetrapeptides from nature and design: a review of synthetic methodologies, structure, and function}, journal = {Chemical Reviews}, volume = {119}, year = {2019}, month = {SEP}, pages = { 10318-10359}, type = {Article}, abstract = {

Small cyclic peptides possess a wide range of biological properties and unique structures that make them attractive to scientists working in a range of areas from medicinal to materials chemistry. However, cyclic tetrapeptides (CTPs), which are important members of this family, are notoriously difficult to synthesize. Various synthetic methodologies have been developed that enable access to natural product CTPs and their rationally designed synthetic analogues having novel molecular structures. These methodologies include the use of reversible protecting groups such as pseudoprolines that restrict conformational freedom, ring contraction strategies, on-resin cyclization approaches, and optimization of coupling reagents and reaction conditions such as temperature and dilution factors. Several fundamental studies have documented the impacts of amino acid configurations, N-alkylation, and steric bulk on both synthetic success and ensuing conformations. Carefully executed retrosynthetic ring dissection and the unique structural features of the linear precursor sequences that result from the ring dissection are crucial for the success of the cyclization step. Other factors that influence the outcome of the cyclization step include reaction temperature, solvent, reagents used as well as dilution levels. The purpose of this review is to highlight the current state of affairs on naturally occurring and rationally designed cyclic tetrapeptides, including strategies investigated for their syntheses in the literature, the conformations adopted by these molecules, and specific examples of their function. Using selected examples from the literature, an in-depth discussion of the synthetic techniques and reaction parameters applied for the successful syntheses of 12-, 13-, and 14-membered natural product CTPs and their novel analogues are presented, with particular focus on the cyclization step. Selected examples of the three-dimensional structures of cyclic tetrapeptides studied by NMR, and X-ray crystallography are also included.

}, author = {Sarojini, Vijayalekshmi and Cameron, Alan J. and Varnava, Kyriakos G. and Denny, William A. and Sanjayan, Gangadhar} } @article {46111, title = {Depolymerization of lignin using a solid base catalyst}, journal = {Energy \& Fuels}, volume = {33}, year = {2019}, month = {MAY}, pages = {4369-4377}, type = {Article}, abstract = {

Lignin extraction from lignocellulosic biomass has attracted considerable attention for an alternative production of sustainable fuels and chemicals. We report the lignin isolation from coconut coir using Klason, organosolv, and soda methods and the depolymerization of isolated lignin to value-added chemicals using a solid base catalyst. The yield of isolated lignin by the Klason method was found to be about 4 to 6 times higher than that by other methods. The structure of isolated Klason lignin (CC-KL), organosolv lignin (CC-ORGL), and soda lignin (CC-SL) was studied using attenuated total reflection (ATR), NMR, microanalysis, and so forth. The monomer molecular formula derived from microanalysis suggested that coir lignin is rich in guaiacyl units. ATR and C-13 NMR clearly indicate that CC-ORGL contains more C-C bonds compared to CC-KL and CC-SL. Subsequently, these isolated lignins were depolymerized over a solid base catalyst (NaX) under atmospheric pressure. CC-SL shows a high yield of aromatic products (28\%) compared to CC-ORGL and CC-KL. In order to develop a sustainable future technology, one-pot depolymerization of coconut coir was performed which resulted in a high yield (64\%) of aromatic products.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.9b00621}, author = {Chaudhary, Richa and Dhepe, Paresh L.} } @article {46168, title = {Design and synthesis of 2-amino-thiophene-proline-conjugates and their anti-tubercular activity against mycobacterium tuberculosis H37Ra}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {MAR }, pages = {2851-2857}, type = {Article}, abstract = {

The emergence of extensively drug resistant tuberculosis (XDRTB) and multi-drug resistant tuberculosis (MDR-TB) has necessitated the development of new drugs with short chemotherapy treatment regime and cost effectiveness. To overcome these challenges, we are reporting the synthesis of a series of 2-amino-thiophene-proline-conjugates which show potent invino and ex-vivo anti-tubercular (anti-TB) activity against mycobacterium tuberculosis (rntb) H37Ra. The synthesis of these 2-amino-thiophene-proline-conjugates was carried out via solution phase peptide coupling reactions using methyl-2aminothiophene-3-carboxylate 8 as an intermediate obtained by modified gewald reaction. Intermediate 8 was coupled with different amino acids to obtain dipeptides 3, 4, 5, 6a and 7. Priliminary anti-TB assay data encoureaged us to synthesize modified proline derivatives 6b-6k via formation of a benzoxazinone intermediate 16. Most of these conjugates are active against mtb H37Ra in both active (A) and dormant (D) strains. They are also active against drug resistant mtb H37Ra strains. A trifluoroethyl ester analog, 6i was the most potent among the series [MIC 1 mu g/mL] along with 6f and 6g [MIC 2-6 mu g/mL]. Cytotoxicity studies suggested that, these compounds are less cytotoxic to human cell lines HeLa, MCF-7, HUVEC and hence possess high selectivity index (SI). Docking studies revealed that the binding mode of most active compounds 6i, 6g and 6f is in accordance with their bioactivity studies having docking score 8.969, 8.446 and 7.865, respectively. More- over, in sllico ADME properties suggest that all the compounds possess drug like properties.

}, keywords = {2-aminothiophene, Anti-tubercular, docking studies, Inh A gene, selectivity index}, issn = {2365-6549}, doi = {10.1002/slct.201803370}, author = {Baravkar, Sachin B. and Wagh, Mahendra A. and Nawale, Laxman U. and Choudhari, Amit S. and Bhansali, Sujit and Sarkar, Dhiman and Sanjayan, Gangadhar J.} } @article {46125, title = {Design, synthesis and biological evaluation of (E)-5-styryl-1,2,4-oxadiazoles as anti-tubercular agents}, journal = {Bioorganic Chemistry}, volume = {86}, year = {2019}, month = {MAY}, pages = {507-512}, type = {Article}, abstract = {

Cinnamic acid and its derivatives are known for anti-tubercular activity. The present study reports the synthesis of cinnamic acid derivatives via bioisosteric replacement of terminal carboxylic acid with {\textquoteleft}{\textquoteleft}oxadiazole{\textquoteright}{\textquoteright}. A series of cinnamic acid derivatives (styryl oxadiazoles) were designed and synthesized in good yields by reaction of substituted cinnamic acids (2, 15a-15s) with amidoximes. The synthesized styryl oxadiazoles were evaluated in vitro for anti-tubercular activity against Mycobacterium tuberculosis (Mtb) H37Ra strain. The structure-activity relationship (SAR) study has identified several compounds with mixed anti-tubercular profiles. The compound 32 displayed potent anti-tubercular activity (IC50= 0.045 mu g/mL). Molecular docking studies on mycobacterial enoyl-ACP reductase enzyme corroborated well with the experimental findings providing a platform for structure based hit-to-lead development.

}, keywords = {1, 2, 4-Oxadiazole, Anti-tubercular, Bioisosteres, Cinnamic acid, Molecular docking}, issn = {0045-2068}, doi = {10.1016/j.bioorg.2019.01.054}, author = {Upare, Abhay Atmaram and Gadekar, Pradip K. and Sivaramakrishnan, H. and Naik, Nishigandha and Khedkar, Vijay M. and Sarkar, Dhiman and Choudhari, Amit and Roopan, S. Mohana} } @article {46254, title = { Development of a nano-gold immunodiagnostic assay for rapid on-site detection of invasive aspergillosis }, journal = {Journal of Medical Microbiology}, volume = {68}, year = {2019}, month = {SEP}, pages = {1341-1352}, type = {Article}, abstract = {

Introduction. Timely detection of invasive aspergillosis (IA) caused by fungal pathogens, i.e. Aspergillus fumigatus and Aspergillus flavus, in immunocompromised patients is crucial in preventing high mortality.

Aim. To develop a simple immunoassay for the detection of galactomannan (GM), an IA biomarker.

Methodology. GM from A. fumigatus and A. flavus clinical strains was purified and characterized by X-ray diffraction, IR spectroscopy and C-13/H-1 nuclear magnetic resonance (NMR) for polyclonal antibody (pAb) production in rabbits. An enzyme-linked immunosorbent assay (ELISA) was standardized using concanavalin A to capture Aspergillus GM and pAbs to detect it. Gold nanoparticles (AuNPs) were synthesized and conjugated to pAbs for the development of a dot-blot immunoassay. The developed dot-blot was evaluated with 109 clinical serum and bronchoalveolar lavage samples.

Results. Spectroscopy studies characterized the D-galactofuranosyl groups of GM responsible for the immune response and generation of pAbs. The ELISA employing pAbs showed a sensitivity of 1 ng ml(-1) for Aspergillus GM. Furthermore, a sensitive, visual, rapid dot-blot assay developed by the conjugation of pAbs to AuNPs (similar to 24 +/- 5 nm size, -36 +/- 2 mV zeta potential) had a detection limit of 1 pg ml(-1) in serum. The pAbs interacted with Aspergillus spp. but did not cross-react with other fungal pathogen genera such as Penicillium and Candida. Evaluation of the dot-blot with 109 clinical samples showed high sensitivity (80\%) and specificity (93.2 \%), with an overall assay accuracy of 89\%.

Conclusion. The developed nano-gold immunodiagnostic assay has immense potential for practical use in rapid, specific and sensitive on-site diagnosis of IA, even under resource-limited settings.

}, doi = {10.1099/jmm.0.001040}, author = {Raval, Komal M. and Ghormade, Vandana and Rajamohanan, P. R. and Choudhary, Hansraj and Rudramurthy, Shivaprakash M. and Chakrabarti, Arunaloke and Paknikar, Kishore} } @article {46014, title = {Effect of copper contamination on zooplankton epidemics}, journal = {Journal of Theoretical Biology}, volume = {469}, year = {2019}, month = {MAY}, pages = {61-74}, type = {Article}, abstract = {

Infectious disease and chemical contamination are increasingly becoming vital issues in many ecosystems. However, studies integrating the two are surprisingly rare. Contamination not only affects the inherent host-resource interaction which influences the epidemic process but may also directly affect epidemiological traits via changes in host{\textquoteright}s behaviour. The fact that heavy metal such as copper is also an essential trace element for organisms, further increase complexity which make predicting the resultant effect of contamination and disease spread difficult. Motivated by this, we model the effect of copper enrichment on a phytoplankton-zooplankton-fungus system. We show that extremely deficient or toxic copper may have a destabilizing effect on the underlying host-resource dynamics due to increased relative energy fluxes as a result of low host mortality due to fish predation. Further, on incorporating disease into the system, we find that the system can become disease-free for an intermediate range of copper concentration whereas it may persist for very less copper enrichment. Also, we predict that there may exist vulnerable regions of copper concentration near the toxic and deficient levels, where the parasite can invade the system for a comparatively lower spore yield. Overall, our results demonstrate that, the effect of contamination may be fundamental to understanding disease progression in community ecology. (C) 2019 Elsevier Ltd. All rights reserved.

}, keywords = {Bistability, Chemical contamination, Daphnia-parasite, Hormesis, Host-resource}, issn = {0022-5193}, doi = {10.1016/j.jtbi.2019.02.016}, author = {Banerjee, Swarnendu and Sarkar, Ram Rup and Chattopadhyay, Joydev} } @article {46210, title = {Effect of media components and growth conditions for improved linoleic acid production by beauveria species}, journal = {Journal of the American Oil Chemists Society}, volume = {96}, year = {2019}, month = {AUG}, pages = {945-954}, type = {Article}, abstract = {

Beauveria species are well-known insect pathogenic fungi, and Beauveria bassiana is used as a biopesticide against various pests in agriculture. However, the Beauveria species has not been reported as producers of microbial oils. In this study, Beauveria spp. MTCC 5184 was used to produce microbial oil with high linoleic acid (LA) content. Ten experiments were performed to evaluate the effects of several media parameters, such as carbon and nitrogen sources, pH, various concentrations of carbon and nitrogen, growth duration, and oleic acid (OLA) supplementation for maximum LA and dry biomass production by the fungus. Several of these parameters had a significant impact on the production of LA, as well as dry biomass. The glucose yeast extract (GYE) medium supplemented with 1.5\% (w/v) peptone yielded maximum LA (0.32 +/- 0.01 g L-1) and biomass (5.51 +/- 0.26 g L-1). However, through the addition of 1.0\% (w/v) OLA, the precursor of LA, LA production was enhanced 12-fold (1.24 +/- 0.03 g L-1), and the biomass production increased by 5-fold (11.05 +/- 0.46 g L-1) in comparison to those in the basal (GYE) medium. Using lactose as the sole carbon source produced the lowest LA (0.05 +/- 0.00 g L-1) and biomass (1.04 +/- 0.10 g L-1). The results of this study will be useful for the commercial exploitation of this fungus for the production of LA-rich microbial oil for use in the production of lubricants, greases, paints, cosmetics, etc.

}, doi = {10.1002/aocs.12252}, author = {Sanghi, Smrati and Chirmade, Tejas and More, Snehal and Prabhune, Asmita and Gupta, Vidya and Kadoo, Narendra} } @article {45532, title = {Effect of processing conditions on the rheological properties of blends of ultra high molecular weight polyethylene with high-density polyethylene}, journal = {Polymer Engineering and Science}, volume = {59}, year = {2019}, month = {DEC}, pages = {821-829}, type = {Article}, abstract = {

Blends of high-density polyethylene (HDPE) with small amounts of ultra-high molecular weight polyethylene (UHMWPE) were prepared by melt mixing in a twin-screw microcompounder. Two types of UHMWPE differing in their states of chain entanglement were used. The blend composition, time of mixing, and rotation speed of the screws were varied. Rheological properties of the blends were studied in oscillatory shear and uniaxial elongational tests. Reduction in phase angle measured in dynamic shear rheology and increase in extensional strain hardening were found to be useful indicators for quantifying the extent of mixing of the two components. Although the disentangled UHMWPE showed reasonable mixing with HDPE during typical residence times of melt compounding operations, the entangled UHMWPE remained essentially undissolved. The extent of mixing increased with mixing time and screw speed. POLYM. ENG. SCI., 2018. {\textcopyright} 2018 Society of Plastics Engineers

}, issn = {0032-3888}, doi = {10.1002/pen.25016}, author = {Chaudhuri, K. and Poddar, S. and Pol, H. and Lele, A. and Mathur, A. and Srinivasa Rao, G.S. and Jasra, R.} } @article {45617, title = {Efficient heterogeneous copper fluorapatite (CuFAP)-catalysed oxidative synthesis of diaryl sulfone under mild ligand- and base-free conditions}, journal = {New Journal of Chemistry}, volume = {43}, year = {2019}, month = {JAN}, pages = {1632-1636 }, type = {Article}, abstract = {A simple, eco-friendly and efficient method for the synthesis of unsymmetrical diaryl sulfones using heterogeneous copper fluorapatite (CuFAP)-catalysed coupling of aryl sulfonic acid and phenyl boronic acid has been developed with good to excellent yields without use of any ligand, base or co-catalyst. Broad substrate scope and gram scale operations are the important features of this method.}, doi = {10.1039/C8NJ04845B}, author = {Kamble, R. B. and Chavan, S. S. and Suryavanshi, G.} } @conference {46218, title = { Efficient removal of Arsenic (III) by novel micro and nano dialdehyde cellulose-cysteine complex extracted from wood pulp cellulose }, booktitle = {Abstracts of Papers of the American Chemical Society}, year = {2019}, month = {APR}, address = {Orlando, FL}, author = {Chen, Hui and Sharma, Sunil and Sharma, Priyanka and Yeh, Heidi and Hsiao, Benjamin} } @article {46435, title = {Enantioselective formal total synthesis of (-)-quinagolide}, journal = {Organic Letters}, volume = {21}, year = {2019}, month = {NOV}, pages = {9089-9093}, type = {Article}, abstract = {

The enantioselective formal total synthesis of (-)-quinagolide has been accomplished in a linear sequence of 8 purification steps from pyridine. The key steps are (a) organocatalyzed Diets-Alder reaction for fixing all three stereocenters on piperidine ring; (b) protecting group enabled deoxygenation of isoquinuclidine skeleton under Birch reduction condition; (c) Lewis acid (TiCl4) catalyzed intramolecular Friedel-Crafts cyclization of dicarboxylic acid; and (d) one-pot diastereoselective ketone reduction-intramolecular cyclization to form oxazolidinone which enables trans-geometry installation. During the course of the synthesis, an interesting reductive cleavage of the C-N bond in the electron-deficient isoquinuclidine skeleton under the Birch reduction conditions has been observed. This is the first synthetic effort to access the core skeleton of (-)-quinagolide.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.9b03477}, author = {Chavan, Subhash P. and Kadam, Appasaheb L. and Gonnade, Rajesh G.} } @article {46266, title = {Experimental and density functional theory investigations of catechol sensing properties of ZnO/RGO nanocomposites}, journal = {Applied Surface Science}, year = {2019}, month = {NOV}, type = {Article}, abstract = {

Catechol, an essential industrial feedstock is one of the major environmental pollutant which causes several health issues including skin irritation, eye damage and genetic defects. In this work, we have investigated the catechol sensing performance of ZnO/RGO composites for its quantitative detection. ZnO/RGO composite showed superior electron transfer kinetics, sensitivity (162.04 mu A mM cm(-2)) and lower detection limit (47 nM) than that of bare ZnO nanoparticles. Further, the change in the zeta potential towards the lower negative demonstrated the strong electrostatic interaction between ZnO-RGO and catechol where it is converted as 1, 2 Benzoquinone through redox reactions. By using state of the art of Density Functional Theory simulations, we have demonstrated the interaction of catechol molecule on various ZnO clusters and RGO supported ZnO clusters. The strong bonding between p orbital of O atom of catechol and d orbital of Zn atom and its charge transfer facilitate the oxidation of catechol molecule. In the presence of RGO, the binding energy of catechol and charge transfer increases which qualitatively infer that RGO/ZnO exhibits higher sensitivity compared to bare ZnO and in consistency with the experimental observations.

}, doi = {10.1016/j.apsusc.2019.143588}, author = {Ponnusamy, Rajeswari and Venkatesan, Rajiu and Gangan, Abhijeet and Samal, Rutuparna and Chakraborty, Brahmananda and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {46070, title = {Exploring notch pathway to elucidate phenotypic plasticity and intra-tumor heterogeneity in gliomas}, journal = {Scientific Reports}, volume = {9}, year = {2019}, month = {JUL }, pages = {9488}, type = {Article}, abstract = {

The phenotypic plasticity and self-renewal of adult neural (aNSCs) and glioblastoma stem cells (GSCs) are both known to be governed by active Notch pathway. During development, GSCs can establish differential hierarchy to produce heterogeneous groups of tumor cells belong to different grades, which makes the tumor ecosystem more complex. However, the molecular events regulating these entire processes are unknown hitherto. In this work, based on the mechanistic regulations of Notch pathway activities, a novel computational framework is introduced to inspect the intra-cellular reactions behind the development of normal and tumorigenic cells from aNSCs and GSCs, respectively. The developmental dynamics of aNSCs/GSCs are successfully simulated and molecular activities regulating the phenotypic plasticity and self-renewal processes in normal and tumor cells are identified. A novel scoring parameter {\textquoteleft}{\textquoteleft}Activity Ratio{\textquoteright}{\textquoteright} score is introduced to find out driver molecules responsible for the phenotypic plasticity and development of different grades of tumor. A new quantitative method is also developed to predict the future risk of Glioblastoma tumor of an individual with appropriate grade by using the transcriptomics profile of that individual as input. Also, a novel technique is introduced to screen and rank the potential drug-targets for suppressing the growth and differentiation of tumor cells.

}, issn = {2045-2322}, doi = {10.1038/s41598-019-45892-8}, author = {Chowdhury, Saikat and Sarkar, Ram Rup} } @article {46149, title = {Exploring the potential of Desmodium gangeticum (L.) DC. extract against spatial memory deficit in rats}, journal = {Pharmacognosy Magazine}, volume = {15}, year = {2019}, month = {APR}, pages = {78-83}, type = {Article}, abstract = {

Background: A few published reports demonstrated the neuroprotective effect of Desmodium gangeticum (L.) DC. in an acute model of dementia. Objective: The purpose of the present study was to evaluate the preclinical efficacy of D. gangeticum against chronic dementia when administered prophylactically. Materials and Methods: Chronic spatial memory deficit was induced in rats by aluminum chloride (AlCl3, 10 mg/kg, i.p.). Treatment with hydroalcoholic whole plant extract of D. gangeticum (DG extract) was initiated 2 week before AlCl3 challenge and continued till the 51(st) day after the challenge, orally at the dose of 400 mg/kg/day. The spatial memory was assessed by Morris water maze test. Hippocampal and frontal cortex acetyl cholinesterase (AChE) and oxidative stress were assessed in diseased rat brains. Results: Chronic administration of AlCl3 produced spatial memory deficit in rats. Memory impairment was manifested in rats as an increase in escape latency and D-quadrant latency whereas a decrease in total time spent in D-quadrant. These behavioral alterations were reversed significantly by the treatment with DG extract. In addition, DG extract significantly increased the island time, indicating memory improvement. DG extract corrected the declined AChE in frontal cortex and altered frontal cortex/hippocampus catalase activity. Phytochemical investigation of the DG extract revealed large content of saponins among the other phytochemicals such as tannins, alkaloids, and flavonoids. Conclusion: These results indicate the possible prophylactic potential of saponin-rich DG extract against chronic memory deficit in rats.

}, keywords = {Acetyl cholinesterase, Aluminum chloride, dementia, Desmodium gangeticum (L) DC, Oxidative stress}, issn = {0973-1296}, doi = {10.4103/pm.pm_501_18}, author = {Changdar, Nilanjan and Ganjhu, Rajesh Kumar and Rijal, Samita and Kumar, Ayush and Mallik, Shanchari Basu and Nampoothiri, Madhavan and Shenoy, Rekha R. and Sonawane, Kiran B. and Rao, Mallikarjuna C. and Mudgal, Jayesh} } @article {45501, title = {Facile production of mesoporous WO3-rGO hybrids for high-performance supercapacitor electrodes: an experimental and computational study}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {7}, year = {2019}, month = {JAN}, pages = {2350-2359}, type = {Article}, abstract = {

This work explored a promising supercapacitor electrode material (WO3-rGO hybrids) synthesized via a simplistic one-pot hydrothermal synthesis route. Various analytical studies (X-ray diffraction study, Raman spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis) were employed in furtherance to explore the structural, morphological, compositional, and surface areal properties of the prepared materials. The enhancement in electrochemical supercapacitive properties were evaluated from pure hexagonal phase WO3 to the various hybrids, depending on the concentration of GO introduced into it, using cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. The WG-80 composite revealed the high rise in capacitance value of 801.6 F/g overcoming the individual capacitance of rGO (71.11 F/g) and WO3 (94.22 F/g) at a current density of 4 A/g with good cycling stability (75.7\%) over 5000 cycles. We have presented quantum capacitance from ab initio calculations and provided theoretical explanation from the orbital interactions.

}, keywords = {Density functional theory, Hydrothermal method, supercapacitor, WO3-rGO hybrids}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.8b05132}, author = {Samal, Rutuparna and Chakraborty, Brahmananda and Saxena, Manav and Late, Dattatray J. and Rout, Chandra Sekhar} } @article {46054, title = {Flower bud proteome reveals modulation of sex-biased proteins potentially associated with sex expression and modification in dioecious Coccinia grandis}, journal = {BMC Plant Biology}, volume = {19}, year = {2019}, month = {JUL}, pages = {330}, type = {Article}, abstract = {

BackgroundDioecy is an important sexual system wherein, male and female flowers are borne on separate unisexual plants. Knowledge of sex-related differences can enhance our understanding in molecular and developmental processes leading to unisexual flower development. Coccinia grandis is a dioecious species belonging to Cucurbitaceae, a family well-known for diverse sexual forms. Male and female plants have 22A+XY and 22A+XX chromosomes, respectively. Previously, we have reported a gynomonoecious form (22A+XX) of C. grandis bearing morphologically hermaphrodite flowers (GyM-H) and female flowers (GyM-F). Also, we have showed that foliar spray of AgNO3 on female plant induces morphologically hermaphrodite bud development (Ag-H) despite the absence of Y-chromosome.ResultsTo identify sex-related differences, total proteomes from male, female, GyM-H and Ag-H flower buds at early and middle stages of development were analysed by label-free proteomics. Protein search against the cucumber protein sequences (Phytozome) as well as in silico translated C. grandis flower bud transcriptome database, resulted in the identification of 2426 and 3385 proteins (FDR \<= 1\%), respectively. The latter database was chosen for further analysis as it led to the detection of higher number of proteins. Identified proteins were annotated using BLAST2GO pipeline. SWATH-MS-based comparative abundance analysis between Female_Early_vs_Male_Early, Ag_Early_vs_Female_Early, GyM-H_Middle_vs_Male_Middle and Ag_Middle_vs_ Male_Middle led to the identification of 650, 1108, 905 and 805 differentially expressed proteins, respectively, at fold change \>= 1.5 and P \<= 0.05. Ethylene biosynthesis-related candidates as highlighted in protein interaction network were upregulated in female buds compared to male buds. AgNO3 treatment on female plant induced proteins related to pollen development in Ag-H buds. Additionally, a few proteins governing pollen germination and tube growth were highly enriched in male buds compared to Ag-H and GyM-H buds.ConclusionOverall, current proteomic analysis provides insights in the identification of key proteins governing dioecy and unisexual flower development in cucurbitaceae, the second largest horticultural family in terms of economic importance. Also, our results suggest that the ethylene-mediated stamen inhibition might be conserved in dioecious C. grandis similar to its monoecious cucurbit relatives. Further, male-biased proteins associated with pollen germination and tube growth identified here can help in understanding pollen fertility.

}, keywords = {Coccinia grandis, Dioecy, Pollen fertility, proteomics, Sex modification, Stamen arrest}, issn = {1471-2229}, doi = {10.1186/s12870-019-1937-1}, author = {Devani, Ravi Suresh and Chirmade, Tejas and Sinha, Sangram and Bendahmane, Abdelhafid and Dholakia, Bhushan B. and Banerjee, Anjan Kumar and Banerjee, Jayeeta} } @article {46082, title = {Fluorogenic BODIPY molecular rotor as an apoptosis marker}, journal = {Chemical Communications}, volume = {55}, year = {2019}, month = {JUN }, pages = {6902-6905}, type = {Article}, abstract = {

Based on a BODIPY molecular rotor and a zinc-dipicolylamine receptor, we designed a fluorogenic probe for the detection of apoptosis. Being poorly emissive in solution and with healthy cells, it selectively binds phosphatidylserine of early apoptotic cells and internalizes into late apoptotic cells, lighting up its green fluorescence.

}, issn = {1359-7345}, doi = {10.1039/c9cc03242h}, author = {Ashokkumar, Pichandi and Ashoka, Anila Hoskere and Collot, Mayeul and Das, Amitava and Klymchenko, Andrey S.} } @article {46436, title = {Formal synthesis of brivaracetam: a key to construct the pyrrolidone scaffold using Pd-catalyzed oxidative cyclization and ring-closing metathesis reaction}, journal = {Tetrahedron Letters}, volume = {60}, year = {2019}, month = {NOV}, pages = {151249}, type = {Article}, abstract = {

A short and efficient synthetic approach for brivaracetam has been accomplished via two different routes which utilize Pd-catalyzed oxidative cyclization and ring-closing metathesis (RCM) as the key reaction. These two routes are novel, simple, scalable and rely on (E)-pent-2-en-1-ol and valeraldehyde as a commercially available starting material to yield brivaracetam with good overall yield. (C) 2019 Published by Elsevier Ltd.

}, keywords = {Antiepileptic drugs, Pd-catalyzed oxidative cyclization, pyrrolinone, Ring-closing metathesis reaction}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2019.151249}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Chavan, Prakash N.} } @article {46331, title = {Francisella novicida Cas9 interrogates genomic DNA with very high specificity and can be used for mammalian genome editing}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {116}, year = {2019}, month = {OCT}, pages = {20959-20968}, type = {Article}, abstract = {

Genome editing using the CRISPR/Cas9 system has been used to make precise heritable changes in the DNA of organisms. Although the widely used Streptococcus pyogenes Cas9 (SpCas9) and its engineered variants have been efficiently harnessed for numerous gene-editing applications across different platforms, concerns remain regarding their putative off-targeting at multiple loci across the genome. Here we report that Francisella novicida Cas9 (FnCas9) shows a very high specificity of binding to its intended targets and negligible binding to off-target loci. The specificity is determined by its minimal binding affinity with DNA when mismatches to the target single-guide RNA (sgRNA) are present in the sgRNA:DNA heteroduplex. FnCas9 produces staggered cleavage, higher homology-directed repair rates, and very low nonspecific genome editing compared to SpCas9. We demonstrate FnCas9-mediated correction of the sickle cell mutation in patient-derived induced pluripotent stem cells and propose that it can be used for precise therapeutic genome editing for a wide variety of genetic disorders.

}, keywords = {CRISPR Cas9, gene therapy, Genome editing, iPSCs, sickle cell anemia}, issn = {0027-8424}, doi = {10.1073/pnas.1818461116}, author = {Acharya, Sundaram and Mishra, Arpit and Paul, Deepanjan and Ansari, Asgar Hussain and Azhar, Mohd and Kumar, Manoj and Rauthan, Riya and Sharma, Namrata and Aich, Meghali and Sinha, Dipanjali and Sharma, Saumya and Jain, Shivani and Ray, Arjun and Jain, Suman and Ramalingam, Sivaprakash and Maiti, Souvik and Chakraborty, Debojyoti} } @inbook {47469, title = {Fungi the crucial contributors for nanotechnology: a green chemistry perspective}, booktitle = {Advancing Frontiers in Mycology \& Mycotechnology}, year = {2019}, pages = {279-298}, publisher = {Springer}, organization = {Springer}, abstract = {Myconanotechnology has gained an exceptional momentum in today{\textquoteright}s world. It encompasses a wide range of applications like in agriculture, biomedical, electronics, textiles, cell and molecular biology, nanodevices, and many more. This fast-growing research field has a list of many nanoparticles that have been synthesized from different kinds of fungi. It is an eco-friendly approach that has sidelined the conventional methods of chemical and physical synthesis that require high energy and are toxic and expensive. The fungal-based synthesis gains functionality due to its discrete and diversified advantages that are being explored. Various parameters like temperature, pH, time and concentrations of fungal biomass or extract as well as of the precursor play a vital role in the protocols. These factors have to be optimized for the laboratory as well as industrial scale production. A greater importance to the use of cell-free extracts for nanosynthesis has been given. They contain the enzymes that are reported to be involved in the synthesis mechanisms as reducing agents and capping agents. The role of fungi in nanosynthesis and nanotechnology per se has many patents under its name. Although there are voids in the existing synthesis methods as well as lacunae in the application part that need to be addressed and filled. With an extensive research and work, myconanoparticles can be exploited to the maximum and lead its advancement in new areas.}, doi = {10.1007/978-981-13-9349-5_11}, author = {Moudgil, Aliesha and Chaudhari, Bhushan P.} } @article {46282, title = {Gold-catalyzed cycloisomerization of pyridine-bridged 1,8-Diynes: An expedient access to luminescent cycl[3.2.2]azines}, journal = {Organic Letters}, volume = {21}, year = {2019}, month = {SEP}, pages = {7109-7113}, type = {Article}, abstract = {

Gold-catalyzed diyne cycloisomerizations involving carbene/alkyne metathesis have been the focal point of attention for the past few years as it offers great potential to build complex polycyclic architectures. However, the design of novel cycloisomerizations has been mostly limited to 1,5/1,6-diynes and has remained very challenging to apply for higher 1,n-diynes. Herein, we disclose an unprecedented cycloisomerization of pyridine-bridged 1,8-diynes involving carbene/alkyne metathesis to access luminescent cycl[3.2.2]azines.

}, doi = {10.1021/acs.orglett.9b02677}, author = {Chintawar, Chetan C. and Mane, Manoj V. and Tathe, Akash G. and Biswas, Suprakash and Patil, Nitin T.} } @article {47171, title = {Graphene oxide supported liposomes as red emissive theranostics for phototriggered tissue visualization and tumor regression}, journal = {ACS Applied Bio Materials}, volume = {2}, year = {2019}, month = {JUL}, pages = {3312{\textendash}3320}, abstract = {

Selective tissue visualization and localized tumor regression without affecting the surrounding healthy tissues are critical concerns in cancer nanomedicine. Importantly, the complete wrapping of a flimsy matrix like liposome by multifunctional graphene oxide is an interesting engineering idea for nanomedicine design. Moreover, designing a safe and biodegradable nanohybrid with significant theranostic ability is a current need for targeted combined therapies. Here, we report a comprehensive result of in vivo tumor diagnosis and phototriggered tumor regression using a biodegradable red emissive nanotheranostic system, viz., graphene oxide flakes fortified liposome (GOF-Lipo), functionalized with folic acid (FA): GOF-Lipo-FA. Graphene oxide support enhances the stability of drug-loaded liposomes in an extracellular environment that prevents the premature release of loaded anticancer drug from the liposomal cavity. Promising outcomes of tumor regression (\~{}300 to 25 mm3) from organized cellular and animal studies are demonstrated in this work. These studies reveal superior biocompatibility, deep intracellular localization, 4T1 breast tumor diagnosis, and long time tumor binding ability of an injected emissive nanohybrid. Overall, a single dose of designed multifunctional systems demonstrates the best tumor regression.

}, doi = {10.1021/acsabm.9b00335}, author = {Prasad, Rajendra and Yadav, Amit S. and Gorain, Mahadeo and Chauhan, Deepak S. and Kundu, Gopal C. and Srivastava, Rohit and Selvaraj, Kaliaperumal} } @article {46179, title = {Graphene-modified electrodes for sensing doxorubicin hydrochloride in human plasma}, journal = {Analytical and Bioanalytical Chemistry}, volume = {411}, year = {2019}, month = {MAR}, pages = {1509-1516}, type = {Article}, abstract = {

Doxorubicin (DOX), an anthracycline molecule, is currently one of the most widely used anticancer drugs in clinics. Systematic treatment of patients with DOX is known to be accompanied by several unpleasant side effects due to the toxicity of the drug. Thus, monitoring of DOX concentration in serum samples has become increasingly important to avoid side effects and ensure therapeutic efficiency. In this study, we discuss the construction of a disposable electrochemical sensor for the direct monitoring of DOX in clinical blood samples. The sensor is based on coating a gold electrode in a flexible integrated electrode construct formed on polyimide sheets using photolithography, with nitrogen-doped reduced graphene oxide (N-rGO) suspended in chitosan. Under optimized conditions, a linear relationship between the oxidative peak current and the concentration of DOX in the range of 0.010-15M with a detection limit of 10nM could be achieved. The sensor was adapted to monitor DOX in serum samples of patients under anticancer treatment.

}, keywords = {Disposable electrodes, doxorubicin, Nitrogen-doped reduced graphene oxide, Serum}, issn = {1618-2642}, doi = {10.1007/s00216-019-01611-w}, author = {Chekin, Fereshteh and Myshin, Vladyslav and Ye, Ran and Melinte, Sorin and Singh, Santosh K. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {46328, title = {Hemiketal-keto tautomerism in 2-deoxy-delta-lactones mediated by 2-lithiothiazole in solution state: a formal synthesis of DAH, Kamusol and their C-5 Epimers}, journal = {Asian Journal of Organic Chemistry}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

The reactions of 2-lithiothiazole on 3,4,6-tri-O-benzyl-2-deoxyglyconolactones have been studied, which resulted in the formation of two products, major (3,4,6-tri-O-benzyl-2-deoxy-1-(2-thiazolyl) glycal) and minor products 3,4,6-tri-O-benzyl-2-deoxy-1-(2-thiazolyl) glycal hemiketal. The hemiketal-keto tautomerism in solution was observed in the minor product. The tautomerism has been studied in various organic solvents and their ratios have been determined by H-1 NMR spectroscopy. The major product from the reaction of 2-lithiothiazole with 2-deoxygluconolactone was utilized for the synthesis of 3-deoxy-D-arabino-2-heptulosonic acid DAH 4 a and 3-deoxy-D-arabino-2-heptulopyranose commonly known natural product kamusol 6 a via acid catalyzed hydration followed by stereoselective methyl glycoside bond formation. Similarly, major product from 2-deoxygalactonolactone furnished 5-epi-DAH 4 b (C-5 epimer of 4 a) and 5-epi-kamusol 6 b (C-5 epimer of 6 a). The minor product has also been utilized for the synthesis of DAH 4 a, 5-epi-DAH 4 b, kamusol 6 a and 5-epi-kamusol 6 b through a common intermediate, alpha-methyl glycosylated product.

}, keywords = {hemiketals, Ketones, tautomerism, thiazoles, umpolung}, issn = {2193-5807}, doi = {10.1002/ajoc.201900407}, author = {Chand, Hemender R. and Bhattacharya, Asish K.} } @article {46441, title = {Hydrocarbon chain-length dependence of solvation dynamics in alcohol-based deep eutectic solvents: a two-dimensional infrared spectroscopic investigation}, journal = {Journal of Physical Chemistry B}, volume = {123}, year = {2019}, month = {NOV}, pages = {9355-9363}, type = {Article}, abstract = {

Deep eutectic solvents (DESs) have gained popularity in recent years as an environmentally benign, inexpensive alternative to organic solvents for diverse applications in chemistry and biology. Among them, alcohol-based DESs serve as useful media in various applications due to their significantly low viscosity as compared to other DESs. Despite their importance as media, little is known how their solvation dynamics change as a function of the hydrocarbon chain length of the alcohol constituent. In order to obtain insights into the chain-length dependence of the solvation dynamics, we have performed two-dimensional infrared spectroscopy on three alcohol-based DESs by systematically varying the hydrocarbon chain length. The results reveal that the solvent dynamics slows down monotonically with an increase in the chain length. This increase in the dynamic timescales also shows a strong correlation with the concomitant increase in the viscosity of DESs. In addition, we have performed molecular dynamics simulations to compare with the experimental results, thereby testing the capacity of simulations to determine the amplitudes and timescales of the structural fluctuations on fast timescales under thermal equilibrium conditions.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.9b08954}, author = {Chatterjee, Srijan and Ghosh, Deborin and Haldar, Tapas and Deb, Pranab and Sakpal, Sushil S. and Deshmukh, Samadhan H. and Kashid, Somnath M. and Bagchi, Sayan} } @conference {47488, title = {Impedance analysis and equivalent circuit modelling of cells subjected to sinusoidal vibration test using electrochemical impedance spectroscopy}, booktitle = { 2019 IEEE Transportation Electrification Conference (ITEC-India)}, year = {2019}, month = {DEC}, publisher = {IEEE}, organization = {IEEE}, address = {Bengaluru, India}, abstract = {Electrochemical impedance spectroscopy is a multipurpose and non-destructive characterization technique in the analysis of electrochemical power sources such as Li-ion cells. The nyquist curve obtained by EIS spectrum of the cell gives information about its overall health. Curve fitting of the EIS nyquist plots further helps in determining the Equivalent Circuit Model (ECM) for a particular cell. In this paper commercial Li-ion cells from three different chemistries; Lithium Nickel Manganese Cobalt Oxide (NMC), Lithium Cobalt Oxide (LCO) and Lithium Iron Phosphate (LFP) are subjected to sinusoidal vibration test as per testing standard mentioned in United States Advanced Battery Consortium (USABC). The EIS measurement of the test cells have been carried out before and after the vibration tests. Curve fitting is carried out on the EIS plots and ECM for the cells is obtained. The components present in ECM and their actual values are estimated from the curve fitting analysis. The magnitude of various resistances like equivalent series resistance (R s ), charge transfer resistance (R ct ) and solid electrolyte interphase resistance (R sei ) is evaluated. This technique is also used in determining the capacitances inside the cell, mainly capacitance (C sei ) due to Solid Electrolyte Interphase layer (SEI) and capacitance due to double layer (C dl ) formation at electrode surface. The resistance in the cell is found to be increased and the capacitances values are decreased after vibration test. Bode plot for the cells are analysed and the overall change in the impedance of cell due to the vibration test is investigated as well. Scanning electron microscopy technique is used on cell electrodes, after vibration test, to validate the actual damage that took place within the cell. The study reveals that the EIS can be used as a non-destructive tool to check cell health after mechanical abuse.}, doi = {10.1109/ITEC-India48457.2019.ITECINDIA2019-232}, author = {Bangal, Ojas A. and Chaturvedi, Vikash and Babu, P. K. Ajeet and Shelke, Manjusha V.} } @article {46338, title = {Ligand-enabled gold-catalyzed C(sp(2))-n cross-coupling reactions of aryl iodides with amines}, journal = {Organic Letters}, volume = {21}, year = {2019}, month = {OCT }, pages = {8101-8105}, type = {Article}, abstract = {

The first example of ancillary (P,N)-ligand-enabled gold-catalyzed C-N cross-coupling reactions of aryl iodides with amines is reported. The high generality of the reaction in de novo synthesis, late-stage modifications, and cascade processes to access functionalized indolinones and carbazoles underscores the synthetic potential of the presented strategy. Monitoring the reaction with ESI-HRMS and NMR provided strong evidence for the in situ formation of putative high valent Au(III) intermediates.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.9b03082}, author = {Akram, Manjur O. and Das, Avishek and Chakrabarty, Indradweep and Patil, Nitin T.} } @article {46133, title = {Lithium speciation in the LiPF6/PC electrolyte studied by two dimensional heteronuclear overhauser enhancement and pulse field gradient diffusometry NMR}, journal = {Journal of Physical Chemistry C}, volume = {123}, year = {2019}, month = {APR}, pages = {9661-9672}, type = {Article}, abstract = {

Electrolytic dissociation of lithium hexafluorophosphate (LiPF6) in the nonaqueous cyclic propylene carbonate (PC) has been investigated in the wide range of concentration (0.05-3.5 M) by Li-7 solution-state nuclear magnetic resonance (NMR) spectroscopy. Two-dimensional heteronuclear Overhauser enhancement spectroscopy NMR experiments have not only enabled the cation solvation and ion-pairing to be directly monitored but additionally evidence anion solvent interaction at higher concentrations (\>1.2 M) of the PC electrolyte. Preliminary analysis of kinetic nOe data has been made to determine site-dependent cross-relaxation rates for the spatial interaction of the solvent with the Li+ cation and the PF6- anion. The concentration dependence of the Li-7 NMR self-diffusion coefficient (D-self), determined using very strong pulsed magnetic field gradients (similar to 1700 Gauss/cm), depicts two breaks to mark the solvation and ion-pairing events in a distinct manner. This in turn has aided the determination of solvent coordination number and average sizes of solvated and ion-paired clusters. Our results indicate that in the contact ion pair (CIP)-dominated electrolyte (\>2 M), lithium-ion mobility across the solvated and ion-paired environments appears to be inhibited which makes the spectral distinction of solvated and ion-paired environments possible. The concentration dependence of the Li-7 NMR spectral and diffusometry data is in striking correspondence with that of bulk conductivity measurements and point to the detrimental effect of CIP aggregates in impeding the ionic conductivity at high salt concentrations. These results have significance in understanding the structure and dynamics of lithium-ion solvates that are ubiquitous in the working environment of a lithium-ion battery.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.8b11599}, author = {Kumar, Vikas and Reddy, R. Ravikanth and Kumar, B. V. N. Phani and Avadhani, Chilukuri V. and Ganapathy, Subramanian and Chandrakumar, Narayanan and Sivaram, Swaminathan} } @article {46224, title = {Methane hydrate dissociation in the presence of novel benign additives}, journal = {Energy Procedia}, volume = {158}, year = {2019}, pages = {5856 - 5865}, abstract = {

The apparent drawbacks of the classical approaches towards dissociation of natural gas hydrates have resulted in a paradigm shift into the development of new hybrid hydrate dissociation practices combining the various basic hydrate dissociation techniques. Another approach that can be followed to maximize the efficiency of gas production from natural gas hydrate reserves is the identification of benign additives which when used even in sparingly small concentrations may enhance the kinetics of hydrate dissociation. In the present work, a class of such additives, never reported before, have been unveiled and christened as Low Dosage Hydrate Dissociation Promoters (LHDPs). The additives were first short listed from a wide potential pool using a lab scale ( 250 ml) stirred tank reactor setup and then further studied using a bench scale ( 2.35 l) reactor setup where they were injected in the form of a water-additive stream to dissociate hydrates. The dissociation approach followed in the case of the bench scale reactor experiments was a combination of the thermal stimulation and depressurization processes along with the element of injection of additives. For both sets of experiments (lab and bench scale), the newly identified LHDPs were found to enhance the kinetics of methane hydrate dissociation as compared to pure water. It was observed that concentration of additive and its flow rate also affect the kinetics of methane hydrate dissociation. An energy and efficiency analysis for the hydrate dissociation method in the case of bench scale rector revealed that additive presence enhanced the energy ratio and thermal efficiency four fold as compared to pure water.

}, keywords = {Depressurization, Dissociation, Energy Ratio, kinetics, LHDP, methane hydrate, Thermal Efficiency, thermal stimulation}, issn = {1876-6102}, doi = {https://doi.org/10.1016/j.egypro.2019.01.540}, url = {http://www.sciencedirect.com/science/article/pii/S1876610219305648}, author = {Gaurav Bhattacharjee and Vivek Barmecha and Nilesh Choudhary and Nawal K. Pande and Parivesh Chugh and Rajnish Kumar} } @article {46444, title = {Methane recovery from marine gas hydrates: a bench scale study in presence of low dosage benign additives}, journal = {Applied Energy}, volume = {253}, year = {2019}, month = {NOV }, pages = {113566}, type = {Article; Proceedings Paper}, abstract = {

De-pressurization is one approach which has been found to be economically feasible for methane recovery from marine hydrates. Hydrate dissociation being an endothermic process suggests that de-pressurization alone would not be sufficient and some additional stimulation would be required for sustained production from one such reservoir. Thermal stimulation may overcome the challenge posed by the endothermic dissociation process; however, economically it may not be ideal. A possible way out is to use thermal stimulation, but at relatively low temperatures as compared to conventional practice. This would be economical and can be accomplished in the presence of small doses of additives mixed in with the water stream used for thermal stimulation. In the present study, a number of benign additives were identified which when used in low concentrations enhance the kinetics of methane hydrate dissociation compared to pure water. Additives were first shortlisted from a wide potential pool using quantum mechanical calculations. These additives were later tested for their efficacy in stirred tank reactor to quickly identify the best additives for the job and few selected additives were then studied in a larger bench scale setup (fixed bed configuration) where they were injected in the form of an additive-water stream to dissociate already formed hydrates. Factors such as toxicity of the additive, fluidity of additive-water stream, foam formation on mixing of additive with water, etc. were also taken into account. An energy and efficiency analysis revealed that reported additives enhance the energy ratio and thermal efficiency of the process as compared to pure water stimulation.

}, keywords = {Bench scale, kinetics, Marine hydrate, methane hydrate, Methane recovery, Natural gas hydrate, Process}, issn = {0306-2619}, doi = {10.1016/j.apenergy.2019.113566}, author = {Bhattacharjee, Gaurav and Choudhary, Nilesh and Barmecha, Vivek and Kushwaha, Omkar S. and Pande, Nawal K. and Chugh, Parivesh and Roy, Sudip and Kumar, Rajnish} } @article {46272, title = {Microglial priming of antigen presentation and adaptive stimulation in Alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Life Sciences}, volume = {76}, year = {2019}, month = {OCT}, pages = {3681-3694}, type = {Review}, abstract = {

The prominent pathological consequences of Alzheimer{\textquoteright}s disease (AD) are the misfolding and mis-sorting of two cellular proteins, amyloid-beta and microtubule-associated protein Tau. The accumulation of toxic phosphorylated Tau inside the neurons induces the increased processing of amyloid-beta-associated signaling cascade and vice versa. Neuroinflammation-driven synaptic depletion and cognitive decline are substantiated by the cross talk of activated microglia and astroglia, leading to neuron degeneration. Microglia are the brain-resident immune effectors that prove their diverse functions in maintaining CNS homeostasis via collaboration with astrocytes and T lymphocytes. Age-related senescence and chronic inflammation activate microglia with increased pro-inflammatory markers, oxidative damage and phagocytosis. But the improper processing of misfolded protein via lysosomal pathway destines the spreading of {\textquoteright}seed{\textquoteright} constituents to the nearby healthy neurons. Primed microglia process and present self-antigen such as amyloid-beta and modified Tau to the infiltrated T lymphocytes through MHC I/II molecules. After an effective conversation with CD4(+) T cells, microglial phenotype can be altered from pro-active M1 to neuro-protective M2 type, which corresponds to the tissue remodeling and homeostasis. In this review, we are focusing on the change in functionality of microglia from innate to adaptive immune response in the context of neuroprotection, which may help in the search of novel immune therapy in AD.

}, doi = {10.1007/s00018-019-03132-2}, author = {Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {45610, title = {Microwave-assisted synthesis and antituberculosis screening of Some 4-((3-(trifluoromethyl)-5,6-dihydro-[1,2,4]triazolo[4,3-a]pyrazin-7(8H)-l)methyl)benzenamine hybrids}, journal = {Journal of Heterocyclic Chemistry}, volume = {56}, year = {2019}, month = {FEB}, pages = {434-442}, type = {Article}, abstract = {

In the present investigation, a series of 4-((3-(trifluoromethyl)-5,6-dihydro-[1,2,4]triazolo[4,3-a]pyrazin-7(8H)-yl)methyl)benzenamine analogs 6a{\textendash}o were synthesized and characterized by IR, NMR (1H and 13C), and mass spectra. All newly synthesized compounds 6a{\textendash}o were prepared under conventional and microwave irradiation methods. These compounds obtained in higher yields and in shorter reaction times in the microwave irradiation method when compared with the conventional method. Synthesized compounds 6a{\textendash}o were inspected for their in vitro antitubercular activity against Mycobacterium tuberculosis H37Ra using an established XTT reduction menadione assay. Among the screened compounds, 6i (IC50: 1.82 μg/mL), 6j (IC50: 1.02 μg/mL), and 6k (IC50: 1.59 μg/mL) showed excellent activity. Furthermore, compound 6i showed MIC90 value of 16.02 μg/mL. In summary, the results indicate the identification of some novel, selective, and specific inhibitors against M. tuberculosis that can be explored further for the potential antitubercular drug.

}, issn = {0022-152X}, doi = {10.1002/jhet.3416}, author = {Patil, Y. and Shingare, R. and Choudhari, A. and Sarkar, D. and Madje, B.} } @article {46329, title = {Molecular basis of drug resistance in smoothened receptor: an in silico study of protein resistivity and specificity}, journal = {Proteins-Structure Function and Bioinformatics}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

Smoothened (SMO) antagonist Vismodegib effectively inhibits the Hedgehog pathway in proliferating cancer cells. In early stage of treatment, Vismodegib exhibited promising outcomes to regress the tumors cells, but ultimately relapsed due to the drug resistive mutations in SMO mostly occurring before (primary mutations G497W) or after (acquired mutations D473H/Y) anti-SMO therapy. This study investigates the unprecedented insights of structural and functional mechanism hindering the binding of Vismodegib with sensitive and resistant mutant variants of SMO (SMOMut). Along with the basic dynamic understanding of Vismodegib-SMO complexes, network propagation theory based on heat diffusion principles is first time applied here to identify the modules of residues influenced by the individual mutations. The allosteric modulation by GLY497 residue in Vismodegib bound SMO wild-type (SMOWT) conformation depicts the interconnections of intermediate residues of SMO with the atom of Vismodegib and identify two important motifs (E-X-P-L) and (Q-A-N-V-T-I-G) mediating this allosteric regulation. In this study a novel computational framework based on the heat diffusion principle is also developed, which identify significant residues of allosteric site causing drug resistivity in SMOMut. This framework could also be useful for assessing the potential allosteric sites of different other proteins. Moreover, previously reported novel inhibitor {\textquoteleft}{\textquoteleft}ZINC12368305,{\textquoteright}{\textquoteright} which is proven to make an energetically favorable complex with SMOWT is chosen as a control sample to assess the impact of receptor mutation on its binding and subsequently identify the important factors that govern binding disparity between Vismodegib and ZINC12368305 bound SMOWT/Mut conformations.

}, keywords = {allosteric sites, molecular dynamics simulation, Mutation, smoothened receptor, Vismodegib}, issn = {0887-3585}, doi = {10.1002/prot.25830}, author = {Sinha, Noopur and Chowdhury, Saikat and Sarkar, Ram Rup} } @article {46330, title = {Molecular cobalt(II) complexes for tau polymerization in Alzheimer{\textquoteright}s disease}, journal = {ACS Omega }, volume = {4}, year = {2019}, month = {OCT}, pages = {16702-16714}, type = {Article}, abstract = {

Tau is an axonal protein known to form abnormal aggregates and is the biomarker of Alzheimer{\textquoteright}s disease. Metal-based therapeutics for inhibition of Tau aggregation is limited and rarely reported in contemporary science. Here, we report the first example of rationally designed molecular cobalt(II)-complexes for effective inhibition of Tau and disaggregation of preformed Tau fibrils. The mechanistic studies reveal that prevention of Tau aggregation by cobalt-based metal complexes (CBMCs) is concentration-dependent and Tau seldom exhibits conformational changes. Interestingly, CBMCs play dual role in causing disassembly of preformed aggregates as well as inhibition of complete Tau aggregation. Furthermore, CBMCs were nontoxic and maintained the tubulin network intact. CBMCs also prevented okadaic acid-induced toxicity in SH-SY5Y cells thus, preventing hyperphosphorylation of Tau. We believe that this unprecedented finding by the newly developed molecular complexes has a potential toward metal-based therapeutics for Alzheimer{\textquoteright}s disease.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b00692}, author = {Gorantla, Nalini Vijay and Landge, Vinod G. and Nagaraju, Pramod Gudigenahally and Priyadarshini, Poornima C. G. and Balaraman, Ekambaram and Chinnathambi, Subashchandrabose} } @article {45585, title = {NetShift: a methodology for understanding {\textquoteleft}driver microbes{\textquoteright} from healthy and disease microbiome datasets}, journal = {ISME Journal}, volume = {13}, year = {2019}, month = {JAN}, pages = {442-454}, type = {Article}, abstract = {The combined effect of mutual association within the co-inhabiting microbes in human body is known to play a major role in determining health status of individuals. The differential taxonomic abundance between healthy and disease are often used to identify microbial markers. However, in order to make a microbial community based inference, it is important not only to consider microbial abundances, but also to quantify the changes observed among inter microbial associations. In the present study, we introduce a method called {\textquoteleft}NetShift{\textquoteright} to quantify rewiring and community changes in microbial association networks between healthy and disease. Additionally, we devise a score to identify important microbial taxa which serve as {\textquoteleft}drivers{\textquoteright} from the healthy to disease. We demonstrate the validity of our score on a number of scenarios and apply our methodology on two real world metagenomic datasets. The {\textquoteleft}NetShift{\textquoteright} methodology is also implemented as a web-based application available at }, doi = {10.1038/s41396-018-0291-x}, author = {Kuntal, B. K. and Chandrakar, P. and Sadhu, S. and Mande, S. S.} } @article {46112, title = {Neutral imino-methyl benzenesulfonate-ligated Pd(II) complexes and implications in ethylene polymerization}, journal = {ACS Omega}, volume = {4}, year = {2019}, month = {MAY}, pages = {9502-9511}, type = {Article}, abstract = {

A reaction between sodium 2-formylbenzenesulfonate and aniline revealed the near-quantitative (91\%) formation of sodium-2-((phenylimino)methyl)benzenesulfonate L1. The identity of L1 was unambiguously ascertained using spectroscopic and analytical methods. The scope of this methodology was widened and various electron-donating amines were treated with sodium 2-formylbenzenesulfonate, and a small library of 6 imine ligands L2-L6 was generated. When L2 was treated with [(COD)PdMeCI], instead of the anticipated [L2PdMe(DMSO)] complex, the formation of [(DMSO)(2)Pd2Cl2Me2] Pd Dim was observed. Nevertheless, the desired imino-methyl benzenesulfonate-ligated palladium complex [L2PdMe(Lu)] C1 was obtained by in situ abstraction of chloride and addition of bulky 2,6-lutidine as the donor group. The observation of characteristic Pd-Me protons at 0.06 ppm and the corresponding carbon at -8.1 ppm indicated the formation of C1. These 1D NMR observations were corroborated by 2D C-H correlation spectra and mass analysis, and the existence of C1 was unambiguously ascertained. Along the same lines, L4 and L5 were treated with a palladium precursor to produce [L4/SPdMe(Lu)]-type complexes C2-C3 in 55-84\% yield, and their identity was established by using a combination of spectroscopic tools, analytical methods, and single-crystal X-ray diffraction. The synthetic utility of C1-C3 has been demonstrated by utilizing these complexes in the insertion polymerization of ethylene to polyethylene.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b00709}, author = {Deshmukh, Satej S. and Gaikwad, Shahaji R. and Mote, Nilesh R. and Manod, M. and Gonnade, Rajesh G. and Chikkali, Samir H.} } @article {46249, title = {New porous high surface area, tio2 anatase/sapo-35 mild bronsted acidic nanocomposite: synthesis, characterization and studies on it{\textquoteright}s enhanced photocatalytic activity.}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {AUG}, pages = {9135-9142}, type = {Article}, abstract = {

Anatase TiO2 and Levyne type microporous silico alumino phosphate SAPO-35 are synthesized by using hydrothermal method. TiO2/SAPO-35 nanocomposites were prepared by sol-gel method with different weight ratios. The synthesized materials were characterized by various analytical techniques such as PXRD, SEM/EDAX, TG/DTA, BET-Surface area, FT-IR, UV-Vis, XPS, MAS-NMR and photocatalytic study. From PXRD results it clearly evidenced that, the TiO2 anatase peaks and SAPO-35 combined peaks are in the composite. The spherical shaped TiO2 nanoparticles were found to be dispersed over the rhombohedral SAPO-35 particles, which was analysed by SEM. BET-surface area analysis revealed that, the calcined SAPO-35 has the surface area of 448 m(2)/g, was decreased to 222 m(2)/g for composite which is due to the presence of TiO2 particles having surface area of 85 m(2)/g on the surface of SAPO-35. The oxidation state and co-ordination of various elements present in nanocomposite was composed by X-ray photoelectron spectroscopy. MAS-NMR analysis has shown that SAPO-35 has tetrahedral Al, P and Si oxides. Eventhough Al is unique Si and P are in two different environment namely one in S6R and another in D6R with double intensity. The photocatalytic performance of methylene blue degradation under sunlight radiation by the synthesized TiO2/SAPO-35 was analyzed. The TiO2/SAPO-35 composites degrade the methylene blue under sunlight irradiation in 25 minutes against 90 minuts for pure TiO2 anatase. A plausible mechanism on photocatalytic activity is also proposed.

}, doi = {10.1002/slct.201902134}, author = {Siliveri, Suresh and Chirra, Suman and Tyagi, Chinkit and Gandamalla, Ambedkar and Adepu, Ajay Kumar and Goskula, Srinath and Gujjula, Sripal Reddy and Venkatathri, Narayanan} } @article {46128, title = {NMR structure and dynamics of inhibitory repeat domain variant 12, a plant protease inhibitor from Capsicum annuum, and its structural relationship to other plant protease inhibitors}, journal = {Journal of Biomolecular Structure \& Dynamics}, year = {2019}, month = {APR}, type = {Article; Early Access}, abstract = {

Although several plant protease inhibitors have been structurally characterized using X-ray crystallography, very few have been studied using NMR techniques. Here, we report an NMR study of the solution structure and dynamics of an inhibitory repeat domain (IRD) variant 12 from the wound-inducible Pin-II type proteinase inhibitor from Capsicum annuum. IRD variant 12 (IRD12) showed strong anti-metabolic activity against the Lepidopteran insect pest, Helicoverpa armigera. The NMR-derived three-dimensional structure of IRD12 reveals a three-stranded anti-parallel beta-sheet rigidly held together by four disulfide bridges and shows structural homology with known IRDs. It is interesting to note that the IRD12 structure containing similar to 75\% unstructured part still shows substantial amount of rigidity of N-H bond vectors with respect to its molecular motion. Communicated by Ramaswamy H. Sarma

}, keywords = {Bt transgenic, Capsicum annuum, Helicoverpa armigera, inhibitory repeating domains, NMR structure, Protease inhibitors (PIs)}, issn = {0739-1102}, doi = {10.1080/07391102.2019.1607559, Early Access Date = APR, Early Access Year = 2019}, author = {Gartia, Janeka and Anangi, Raveendra and Joshi, Rakesh S. and Giri, Ashok P. and King, Glenn F. and Barnwal, Ravi P. and Chary, Kandala V. R.} } @article {46359, title = {Non nucleoside reverse transcriptase inhibitors, molecular docking studies and antitubercular activity of thiazolidin-4-one derivatives}, journal = {Current Computer-Aided Drug Design}, volume = {15}, year = {2019}, month = {JAN}, pages = {433-444}, type = {Article}, abstract = {

Background: Management of Co-existence of Acquired immunodeficiency syndrome and Tuberculosis has become a global challenge due to the emergence of resistant strains and pill burden. Objective: Hence the aim of the present work was to design and evaluate compounds for their dual activity on HIV-1 and Tuberculosis (TB). Methods: A series of seven, novel Thiazolidin-4-one derivatives were synthesized and evaluated for their anti-HIV and anti-tubercular activity along with Molecular docking studies. All the seven compounds displayed promising activity against the replication of HIV-1 in cell-based assays. The four most active compounds were further evaluated against X4 tropic HIV-1(UG)(070) and R5 tropic HIV-1(vB59) primary isolates. The binding affinity of all the designed compounds for HIV-RT and Mycobacterium tuberculosis Enol Reductase (MTB InhA) was gauged by molecular docking studies which revealed crucial thermodynamic interactions governing their binding. Results: The CC50 values for the test compounds were in the range of, 15.08-34.9 mu g/ml, while the IC50 values were in the range of 16.1-27.13(UG(070); X4) and 12.03-23.64 (VB59; R5) mu g/ml. The control drug Nevirapine (NVP) exhibited CC50 value of 77.13 mu g/ml and IC50 value of 0.03 mu g/ml. Amongst all these compounds, compound number 3 showed significant activity with a TI value of 2.167 and 2.678 against the HIV-1 X4 and the R5 tropic virus respectively. In anti-mycobacterial screening, the compounds proved effective in inhibiting the growth of both log phase and starved MTB cultures. Conclusion: Compound 3 has been found to be active against HIV-1 as well as MTB.

}, keywords = {anti-HIV-1 activity, Antitubercular activity, human immunodeficiency virus-1, Molecular docking, Non nucleoside reverse transcriptase, thiazolidin-4-ones}, issn = {1573-4099}, doi = {10.2174/1573409915666181221102903}, author = {Chitre, Trupti S. and Patil, Shital M. and Sujalegaonkar, Anagha G. and Asgaonkar, Kalyani D. and Khedkar, Vijay M. and Garud, Dinesh R. and Jha, Prakash C. and Gaikwad, Sharddha Y. and Kulkarni, Smita and Choudhari, Amit and Sarkar, Dhiman} } @inbook {47486, title = {Noncovalent interactions in hydrogenation and hydroformylation}, booktitle = {Noncovalent Interactions in Catalysis}, number = {RSC Catalysis Series}, year = {2019}, publisher = {RSC}, organization = {RSC}, abstract = {This chapter summarizes the fundamentals of hydrogenation and hydroformylation reactions. An overview of state-of-the-art developments is presented to set the context. Subsequently, the significance of noncovalent interactions in these reactions is discussed in detail. Hydrogen bonding has been one of the leading noncovalent interactions that has been very frequently used in catalysis, including hydrogenation and hydroformylation reactions. Recent examples from the literature are presented to illustrate the role of hydrogen bonding in hydrogenation and hydroformylation. The impact of hydrogen bonding on catalyst development through self-assembly and the role of hydrogen bonding in directing a substrate to achieve high enantiomeric excess are discussed.}, doi = {10.1039/9781788016490-00168}, author = {Koshti, Vijay S. and Chikkali, Samir H.} } @article {46139, title = {Palladium impregnated amine Co-condensed hexagonal mesoporous silica: a novel catalyst in tailoring suzuki and heck coupling reactions in base free condition}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {APR }, pages = {3823-3832}, type = {Article}, abstract = {

Palladium impregnated amine co-condensed hexagonal mesoporous silicas (HMS-X) were synthesized (sol-gel process) using different amines (Ethylene diamine and pyridine) of various concentrations (0.25 equiv. and 2 equiv.). The effect of amine concentration on the local structure of hexagonal mesoporous silica was studied. The catalyst shows excellent catalytic activity and high TOF towards both Suzuki and Heck coupling reactions without using any base in reaction medium with the solvent DMF:water in (1:1) ratio. The catalyst was reused and it was recyclable up to three cycle without any appreciable loss of activity and the kinetics of the reaction varying different parameters also have been studied thoroughly.

}, keywords = {Amine functionalized silica, Base free, Heck reaction, Palladium supported catalysts, Suzuki reaction}, issn = {2365-6549}, doi = {10.1002/slct.201803485}, author = {Das, Prangya Paramita and Prabhakaran, Vinod C. and Nanda, Samik and Sen, Debasis and Chowdhury, Biswajit} } @article {46438, title = {Pathways to defense metabolites and evading fruit bitterness in genus Solanum evolved through 2-oxoglutarate-dependent dioxygenases}, journal = {Nature Communications}, volume = {10}, year = {2019}, month = {NOV}, pages = {5169}, type = {Article}, abstract = {

The genus Solanum comprises three food crops (potato, tomato, and eggplant), which are consumed on daily basis worldwide and also producers of notorious anti-nutritional steroidal glycoalkaloids (SGAs). Hydroxylated SGAs (i.e. leptinines) serve as precursors for leptines that act as defenses against Colorado Potato Beetle (Leptinotarsa decemlineata Say), an important pest of potato worldwide. However, SGA hydroxylating enzymes remain unknown. Here, we discover that 2-OXOGLUTARATE-DEPENDENT-DIOXYGENASE (2-ODD) enzymes catalyze SGA-hydroxylation across various Solanum species. In contrast to cultivated potato, Solanum chacoense, a widespread wild potato species, has evolved a 2-ODD enzyme leading to the formation of leptinines. Furthermore, we find a related 2-ODD in tomato that catalyzes the hydroxylation of the bitter a-tomatine to hydroxytomatine, the first committed step in the chemical shift towards downstream ripening-associated non-bitter SGAs (e.g. esculeoside A). This 2-ODD enzyme prevents bitterness in ripe tomato fruit consumed today which otherwise would remain unpleasant in taste and more toxic.

}, issn = {2041-1723}, doi = {10.1038/s41467-019-13211-4}, author = {Cardenas, Pablo D. and Sonawane, Prashant D. and Heinig, Uwe and Jozwiak, Adam and Panda, Sayantan and Abebie, Bekele and Kazachkova, Yana and Pliner, Margarita and Unger, Tamar and Wolf, Dalia and Ofner, Itai and Vilaprinyo, Ester and Meir, Sagit and Davydov, Olga and Gal-On, Amit and Burdman, Saul and Giri, Ashok and Zamir, Dani and Scherf, Tali and Szymanski, Jedrzej and Rogachev, Ilana and Aharoni, Asaph} } @article {46439, title = {Photoexcited toluidine blue inhibits tau aggregation in Alzheimer{\textquoteright}s disease}, journal = {Acs Omega}, volume = {4}, year = {2019}, month = {NOV }, pages = {18793-18802}, type = {Article}, abstract = {

The aggregates of microtubule-associated protein Tau are considered as a major hallmark of Alzheimer{\textquoteright}s disease. Tau aggregates accumulate intracellularly leading to neuronal toxicity. Numerous approaches have been targeted against Tau protein aggregation, which include application of synthetic and natural compounds. Toluidine blue is a basic dye of phenothiazine family, which on irradiation with a 630 nm light gets converted into a photoexcited form, leading to generation of singlet oxygen species. Methylene blue is the parent compound of toluidine blue, which has been reported to be potent against tauopathy. In the present work, we studied the potency of toluidine blue and photoexcited toluidine blue against Tau aggregation. Biochemical and biophysical analyses using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, ThS fluorescence, circular dichroism spectroscopy, and electron microscopy suggested that toluidine blue inhibited the aggregation of Tau in vitro. The photoexcited toluidine blue potentially dissolved the matured Tau fibrils, which indicated the disaggregation property of toluidine blue. The cell biology studies including the cytotoxicity assay and reactive oxygen species (ROS) production assay suggested toluidine blue to be a biocompatible dye as it reduced ROS levels and cell death. The photoexcited toluidine blue modulates the cytoskeleton network in cells, which was supported by immunofluorescence studies of neuronal cells. The studies in a UAS Tau E14 transgenic Drosophila model suggested that photoexcited toluidine blue was potent to restore the survival and memory deficits of Drosophila. The overall finding of our studies suggested toluidine blue to be a potent molecule in rescuing the Tau-mediated pathology by inhibiting its aggregation, reducing the cell death, and modulating the tubulin levels and behavioral characteristics of Drosophila. Thus, toluidine blue can be addressed as a potent molecule against Alzheimer{\textquoteright}s disease.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b02792}, author = {Dubey, Tushar and Nalini, Gorantla Vijay and Chandrashekara, Kagepura Thammaiah and Chinnathambi, Subashchandrabose} } @article {46200, title = {p-Nitrophenylcarbonates: a new class of compounds for chemodosimetric colorimetric fluoride anion sensing detectable by the naked eye}, journal = {ChemistrySelect}, volume = {4}, year = {2019}, month = {FEB}, pages = {1830-1833}, type = {Article}, abstract = {

A new class of compounds containing the p-nitrophenylcarbonate motif is reported, that can selectively sense fluoride anions over other halide anions with a detection limit ranging from 0.29 to 0.48 mu M. The fluoride ion acts as nucleophile, leading to the liberation of p-nitrophenol, that is easily detectable and quantifiable colorimetrically.

}, keywords = {colorimetric sensing, p-nitrophenyl carbonate, selective fluoride detection}, issn = {2365-6549}, doi = {10.1002/slct.201803103}, author = {Yadav, Amit Kumar and Chilukuri, Harsha and Kumari, Linthoinganbi Raj and Karthikeyan, Muthukumarasamy and Fernandes, Moneesha} } @article {46158, title = {Promising visible-light driven hydrogen production from water on a highly efficient CuCo2S4 nanosheet photocatalyst}, journal = {Journal of Materials Chemistry A}, volume = {7}, year = {2019}, month = {MAR }, pages = {6985-6994}, type = {Article}, abstract = {

Here we report the development of CuCo2S4 nanosheets (NSs) as a promising semiconductor photocatalyst for the first time for water splitting reactions under visible light ( 420 nm) conditions, without the support of any noble metal co-catalyst. These NSs were produced via a simple hydrothermal route and have desirable properties with a band gap of 2.24 eV, and are photo-catalytically active under visible light with an apparent quantum yield (AQY) of 2.48\%. Under visible light, CuCo2S4 NSs exhibit excellent weight-normalized photoactivity that generates approximate to 25900 mol h(-1) H-2 for 1 g of material with sulphide + sulphite as the sacrificial agent under 7.68 mW cm(-2) illumination, which is the best evolution reported for any chalcogenide semiconductor material without any co-catalyst to date with unprecedented long-term operational stability (up to 12 h study time). The rate and number of hydrogen gas molecules produced are 8.2855 x 10(15) s(-1) cm(-2) which remained constant for three catalytic cycles with a turnover frequency (TOF) value of 0.017 s(-1). The effect of Cu substitution on photoactivity was also investigated for comparative studies and it was found that CuCo2S4 NSs show superior activity to Cu0.5Co2.5S4 and Co3S4. These CuCo2S4 NSs absorb the entire visible range of the spectrum from 420 to 800 nm, and have a highly populated density of states at the Fermi level and a high donor concentration of 7.22 x 10(18) cm(-3) which have been evaluated by Mott-Schottky analysis and favourable adsorption of H+ on S-sites and conversion to H-2 corroborate their efficient photocatalytic activity.

}, issn = {2050-7488}, doi = {10.1039/c9ta00391f}, author = {Chauhan, Meenakshi and Soni, Kiran and Karthik, P. E. and Reddy, Kasala Prabhakar and Gopinath, Chinnakonda S. and Deka, Sasanka} } @article {46242, title = {Protein-capped metal nanoparticles inhibit tau aggregation in alzheimer{\textquoteright}s disease}, journal = {Acs Omega}, volume = {4}, year = {2019}, month = {JULY}, pages = {12833-12840}, type = {Article}, abstract = {

The Alzheimer{\textquoteright}s disease (AD) therapeutic research is yielding a large number of potent molecules. The nanoparticle-based therapeutics against the protein aggregation in AD is also taking a lead especially with amyloid-beta as a primary target. In this work, we have screened for the first time protein-capped (PC) metal nanoparticles for their potency in inhibiting Tau aggregation in vitro. We present a novel function of PC-Fe3O4 and PC-CdS nanoparticles as potent Tau aggregation inhibitors by fluorescence spectrometry, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and electron microscopy. We demonstrate that the biologically synthesized PC-metal nanoparticles, especially iron oxide do not affect the viability of neuroblastoma cells. Moreover, PC-CdS nanoparticles show dual properties of inhibition and disaggregation of Tau. Thus, the nanoparticles can take a lead as potent Tau aggregation inhibitors and can be modified for specific drug delivery due to their very small size. The current work presents unprecedented strategy to design anti-Tau aggregation drugs, which provides interesting insights to understand the role of biological nanostructures in Alzheimer{\textquoteright}s disease.

}, doi = {10.1021/acsomega.9b01411}, author = {Sonawane, Shweta Kishor and Ahmad, Absar and Chinnathambi, Subashchandrabose} } @article {46007, title = {Quantification of niclosamide polymorphic forms - a comparative study by Raman, NIR and MIR using chemometric techniques}, journal = {Talanta}, volume = {199}, year = {2019}, month = {JUL }, pages = {679-688}, type = {Article}, abstract = {

Niclosamide, an anthelmintic drug recently repurposed for its activity against cancer, crystallizes into three solvated forms, two monohydrates (NHa, NHb) and one anhydrous (NAn) form. NAn is sensitive to pseudopolymorphic transformations that affect its dissolution and consequently, its bioavailability. NAn exhibits a polymorphic conversion to metastable monohydrate (NHa) form during high-energy milling in presence of poorly soluble solvents like water. It is hence very important to quantify polymorphic conversion from NAn to NHa, as water is a commonly used solvent during various processing like ball milling and wet granulation. This main objective of the study was to examine the feasibility of Raman, NIR and MIR spectroscopic techniques for identification and quantification of polymorphic forms of niclosamide in binary mixtures and multicomponent mixtures. Calibration models were developed and validated by vibrational spectroscopic techniques in binary mixtures of NAn and NHa and in multicomponent mixtures by chemometric techniques. These techniques were further used to identify and quantify NHa during ball milling, granulation and in presence of other polymorphic forms of niclosamide. Identification and quantification of pseudopolymorphs in binary and multicomponent mixtures with an acceptable recovery of 100.13-102.99\% for Raman and 100.07-101.28\% for NIR with low \% RSD of 2.38-3.12 for both techniques were obtained. The \% NHa determined during ball milling and granulation was similar by NIR and Raman. Raman spectroscopy however showed a greater advantage over other techniques in determining the NHa in presence of NHb due to significant difference in the spectral region of hydrates, when compared to NIR and MIR.

}, keywords = {Ball milling, Granulation, MSC, PLS, Polymorphic conversion, spectroscopy}, issn = {0039-9140}, doi = {10.1016/j.talanta.2019.03.027}, author = {Bhavana, Valmala and Chavan, Rahul B. and Mannava, M. K. Chaitanya and Nangia, Ashwini and Shastri, Nalini R.} } @article {46187, title = {Remarkably distinct mechanical flexibility in three structurally similar semiconducting organic crystals studied by nanoindentation and molecular dynamics}, journal = {Chemistry of Materials}, volume = {31}, year = {2019}, month = {FEB}, pages = {1391-1402}, type = {Article}, abstract = {

Distinct macroscopic mechanical responses of the three crystals of naphthalene diimide derivatives, 1Me, 1Et, and 1nPr, studied here are very intriguing because their molecular structures are very similar, with the difference only in the alkyl chain length. Among the three crystals examined, 1Me shows highly plastic bending nature, 1Et shows elastic flexibility, and 1nPr is brittle. A detailed investigation by nanoindentation and molecular dynamics (MD) simulations allowed us to correlate their distinct mechanical responses with the way the weak interactions pack in crystal structures. The elastic modulus (E) of 1Me is nearly an order of magnitude lower than that of 1Et, whereas hardness (H) is less than half. The low values of E and H of 1Me indicate that these crystals are highly compliant and offer a low resistance to plastic flow. As the knowledge of hardness and elastic modulus of molecular crystals alone is insufficient to capture their macroscopic mechanical deformation nature, that is, elastic, brittle, or plastic, we have employed three-point bending tests using the nanoindentation technique. This allowed a quantitative evaluation of flexibility of the three mechanically distinct semiconducting molecular crystals, which is important for designing larger-scale applications; these were complemented with detailed MD simulations. The elastic 1Et crystals showed remarkable flexibility even after 1000 cycles. The results emphasize that the alkyl side chains in functional organic crystals may be exploited for tuning their self-assembly as well as their mechanical properties. Hence, the study has broad implications, for example, in crystal engineering of various flexible, ordered molecular materials.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.8b04800}, author = {Devarapalli, Ramesh and Kadambi, Sourabh Bhagwan and Chen, Chun-Teh and Krishna, Gamidi Rama and Kammari, Bal Raju and Buehler, Markus J. and Ramamurty, Upadrasta and Reddy, C. Malla} } @article {45604, title = {Retraction: a highly concise and practical route to clavaminols, sphinganine and (+)-spisulosine via indium mediated allylation of α-hydrazino aldehyde and a theoretical insight into the stereochemical aspects of the reaction}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {FEB}, pages = {3336-3336 }, type = {Article}, abstract = {A conceptually different approach has been employed for the synthesis of 1,2-amino alcohols by proline-catalyzed α-amination of aldehyde and one-pot indium mediated allylation of the crude α-hydrazino aldehydes. DFT based quantum chemical calculations have been performed to obtain a quantitative explanation of the stereoselectivity of the reaction.}, doi = {10.1039/C9RA90005E}, author = {Pandey, M. and Chowdhury, P. S. and Dutta, A. K. and Kumar, P. and Pal, S.} } @article {46422, title = {Separation of nitroaromatics from wastewater by using supported ionic liquid membranes}, journal = {Journal of Water Process Engineering}, volume = {32}, year = {2019}, month = {DEC}, pages = {100925}, type = {Article}, abstract = {

Nitroaromatics have been released into wastewater during its production and application, thus, contaminating the ecosystem. The stringent discharge limits of industrial effluents have led to the development of sustainable technologies for removal of nitroaromatics from wastewater. In the present investigation, separation of nitroaromatic compounds such as TNT, TNP and Tetryl from model wastewater was investigated by using supported ionic liquid membrane (SILM) process. Various aliquat 336 based ionic liquids (ILs) were synthesised and characterized, and immobilized in PTFE and PVDF supports for the preparation of SILMs. The key parameters such as type of IL and striping phase, feed phase pH, selectivity for SILM, extraction kinetics and reuse of SILM were studied, in detail. The size of IL-anion plays an important role in removal process. The SILM was found to be selective for TNP over other nitroaromatics. Maximum separation of TNP (\< 95\%) was achieved with IL, [A336][SCN] within 12 h. Selectivity and reuse of the membrane indicate the potential of SILM technology as a sustainable chemical process for the treatment of nitroaromatics contaminated wastewater.

}, keywords = {Ionic liquid, Membrane, Nitroaromatics, Separation, wastewater}, issn = {2214-7144}, doi = {10.1016/j.jwpe.2019.100925}, author = {Bhosale, Vikas K. and Chana, Harpreet K. and Kamble, Sanjay P. and Kulkarni, Prashant S.} } @article {46288, title = {Studies on the use of sodium polyacrylate (SPA) for low-salt animal skin preservation}, journal = {Environmental Science and Pollution Research}, volume = {26}, year = {2019}, month = {SEP}, pages = { 27100-27111}, type = {Article}, abstract = {

Salt-based preservation is practiced for decades in the leather industry because of its versatility, cost-effectiveness, and availability. The salt removed from the soaking process causes significant pollution including organic and elevated total dissolved solids (TDS). Hence, a low-salt skin preservation method using commercial sodium polyacrylate with a reduced quantity of sodium chloride aiming to retain leather properties and pollution reduction was the principal focus of the study. Commercial sodium polyacrylate initially characterized for water absorption capacity along with structural and functional properties is confirmed by NMR and IR spectroscopic techniques. In preliminary experiments, the process parameters attained optimized conditions of sodium polyacrylate (SPA) quantity (5\%), a minimal amount of salt (15\%), and contact time (4 h) required for skin preservation. Besides, reusability studies after SPA recovery (95\%) were applied to skins with an optimized quantity of SPA and salt subsequently stored for 15 days along with control (40\% salt). The results revealed that SPA with low salt aided an adequate curing efficiency with a substantial reduction (\> 65\%) of TDS and comparable physical and organoleptic properties on par with the conventional method. Overall, SPA supported low-salt skin preservation reduces pollutant load (TDS) caused due to using of 40\% sodium chloride in the conventional curing process.

}, doi = {10.1007/s11356-019-05871-y}, author = {Balasubramanian, Venkatakrishnan and Velappan, Brindha and Vijayan, Sandhya Kurvilla and Jabamani, Hepzibah and Nagarajan, Vedaraman and Victor, John Sundar and Ranganath, Suresha P. and Badiger, Manohar V. and Chinnaraj, Velappan kandukalpatti and Chellappa, Muralidharan} } @article {46012, title = {Synthesis and antimycobacterial evaluation of new 5-(1-benzyl-1H-1,2,3-triazol-4-yl)-4-methyl-2-arylthiazole derivatives}, journal = {Medicinal Chemistry Research}, volume = {28}, year = {2019}, month = {JUN}, pages = {805-819}, type = {Article}, abstract = {

A new series of 5-(1-benzyl-1H-1,2,3-triazol-4-yl)-4-methyl-2-arylthiazole derivatives, 6a-w have been synthesized by click reaction of substituted benzylazide, 5a-d with 5-ethynyl-4-methyl-2-substituted phenylthiazole, 4a-f. The starting compounds 4-ethynyl-2-substituted phenylthiazole (4a-f) were synthesized from the corresponding thiazole aldehyde by using the Ohira-Bestmann reagent. The structure of the synthesized compounds was determined by spectral analysis. All the synthesized compounds were screened for their preliminary antitubercular activity against Mycobacterium tuberculosis H37Ra (MTB, ATCC 25177). Most of the synthesized compounds reported good activity against M. tuberculosis H37Ra strain with IC50 range of 0.58-8.23 mu g/mL. Compounds 6g and 6k reported good antitubercular activity with MIC90 values of 4.71 and 2.22 mu g/mL, respectively. Potential antimycobacterial activity suggested that these compounds could serve as good lead compounds for further optimization and development of a newer antitubercular candidate. [GRAPHICS] .

}, keywords = {1, 2, 3-Triazole, Antitubercular activity, Molecular docking, Ohira-Bestmann reagent, Thiazole}, issn = {1054-2523}, doi = {10.1007/s00044-019-02310-y}, author = {Shinde, Vikas and Mahulikar, Pramod and Mhaske, Pravin C. and Chakraborty, Shakti and Choudhari, Amit and Phalle, Siddharth and Choudhari, Prafulla and Sarkar, Dhiman} } @article {46201, title = {Synthesis and biological evaluation of 2,4,5-trisubstituted thiazoles as antituberculosis agents effective against drug-resistant tuberculosis}, journal = {European Journal of Medicinal Chemistry}, volume = {178}, year = {2019}, month = {SEP}, pages = {315-328}, type = {Article}, abstract = {

The dormant and resistant form of Mycobacterium tuberculosis presents a challenge in developing new anti-tubercular drugs. Herein, we report the synthesis and evaluation of trisubstituted thiazoles as antituberculosis agents. The SAR study has identified a requirement of hydrophobic substituent at C2, ester functionality at C4, and various groups with hydrogen bond acceptor character at C5 of thiazole scaffold. This has led to the identification of 13h and 13p as lead compounds. These compounds inhibited the dormant Mycobacterium tuberculosis H37Ra strain and M. tuberculosis H37Rv selectively. Importantly, 13h and 13p were non-toxic to CHO cells. The 13p showed activity against multidrug-resistant tuberculosis isolates. (C) 2019 Elsevier Masson SAS. All rights reserved.

}, doi = {10.1016/j.ejmech.2019.05.082}, author = {Karale, Uttam B. and Krishna, Vagolu Siva and Krishna, E. Vamshi and Choudhari, Amit S. and Shukla, Manjulika and Gaikwad, Vikas R. and Mahizhaveni, B. and Chopra, Sidharth and Misra, Sunil and Sarkar, Dhiman and Sriram, Dharmarajan and Dusthackeer, V. N. Azger and Rode, Haridas B.} } @article {46440, title = {Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {NOV}, pages = {36343-36350}, type = {Article}, abstract = {

The remnants of the anaerobic digestion process, {\textquoteleft}the digestate,{\textquoteright} mainly consist of fibrous lignin and cellulose like molecules, as a significant carbon repository along with some other inorganic impurities. The present work demonstrates the potential use of anaerobically treated fruit and vegetable waste (FVW) as a source of porous carbon for supercapacitor electrode materials. This work suggests that the FVW digestate can inherit silicon (Si) and calcium (Ca) based inorganic impurities, which play an essential role as structure directing agents for digestate derived carbon. These contaminants act as hard templates during carbonization to create hierarchical pores and contribute to an enhancement in surface area. Different batches from an anaerobic biogas digester plant are converted to porous carbon and examined as a potential supercapacitor electrode material. A maximum capacitance of 235 F g(-1) is achieved from DDHPC-4kh carbon with a specific surface area of 2502 m(2) g(-1) at a current density of 1 A g(-1) in an acidic aqueous electrolyte. The results are significant in comparison to other bio-sourced precursors studied previously.

}, doi = {10.1039/c9ra06603a}, author = {Chaturvedi, Vikash and Usangonvkar, Saurabh and Shelke, Manjusha V.} } @article {46314, title = {Synthesis of new 1,3,4-oxadiazole and benzothiazolylthioether derivatives of 4-arylmethylidene-3-substituted-isoxazol-5(4H)-one as potential antimycobacterial agents}, journal = {Medicinal Chemistry Research}, volume = {28}, year = {2019}, month = {NOV}, pages = {1873-1884}, type = {Article}, abstract = {

A new series of 4-[(substituted benzylidene)-3-[(5-(pyridine-4-yl)-1,3,4-oxadiazole-2-ylthio)-methyl]i soxazol-5(4H)-one (6a-g) and 4-(substituted benzylidene)-3-((benzo[d]thiazol-2-ylthio)methyl)isoxazol-5(4H)-one (8a-g) was synthesized. All the synthesized compounds were screened for antitubercular activity against Mycobacterium tuberculosis H37Ra (ATCC 25177) and Mycobacterium bovis BCG (ATCC 35743) and antibacterial activity against Escherichia coli (NCIM 2576), Pseudomonas flurescence (NCIM 2059), Staphylococcus aureus (NCIM 2602), Bacillus subtilis (NCIM 2162). Amongst the synthesized 1,3,4-oxadiazole and benzothiazoyl thioether derivatives, compounds 6b and 8b showed excellent antimycobacterial activity and compounds 6b, 8a, 8b, and 8d showed excellent antibacterial activity against all tested antibacterial strains. The synthesized compounds were further evaluated for their cytotoxic activity against the HCT 116 and HeLa cancer cell lines. The 1,3,4-oxadiazole and benzothiazoyl thioether derivatives 6a-g and 8a-g did not show cytotoxicity.

}, keywords = {1, 3, 4-Oxadiazole, antibacterial activity, Antitubercular activity, Benzothiazol, Isoxazol-5(4H)-one, Thioeteher}, issn = {1054-2523}, doi = {10.1007/s00044-019-02420-7}, author = {Chavan, Abhijit P. and Deshpande, Rujuta R. and Borade, Nandkumar A. and Shinde, Abhijit and Mhaske, Pravin C. and Sarkar, Dhiman and Bobade, Vivek D.} } @article {46164, title = {Synthesis of ultrathin PEDOT on carbon nanotubes and shear thinning xanthan Gum-H2SO4 gel electrolyte for supercapacitors}, journal = {ChemElectroChem}, volume = {6}, year = {2019}, month = {MAR }, pages = {1861-1869}, type = {Article}, abstract = {

Resistance of the electrode material play a vital role for applications in supercapacitors, where lowering the resistance leads to improved performance. Poly(3,4-ethylene dioxythiophene) (PEDOT) possesses high theoretical conductivity; however, the high density of grain boundaries, low accessible surface area, and low rate capability have been pervasive issues affecting the PEDOT-based supercapacitors. To this end, a hydrothermal method is proposed in this work where oxygen functional groups incorporated on the surface of carbon nanotubes (CNTs) are utilized to polymerize 3,4-ethylenedioxythiophene (EDOT). PEDOT forms an ultrathin, well-aligned coating on the surface of CNTs. This arrangement minimizes the number of grain boundaries and increases the electrochemically active surface area. Additionally, a shear-thinning Xanthan gum-H2SO4 gel electrolyte is introduced to overcome the low impregnation of the conventional polyvinyl-based electrolyte due to the hydrophobicity of the CNT-PEDOT composite. A supercapacitor based on this material showed a very low Equivalent Series Resistance (ESR) of 0.31 which leads to a high power density of 74 W cm(-3).

}, keywords = {gel electrolyte, PEDOT, shear thinning, supercapacitor, xanthan gum}, issn = {2196-0216}, doi = {10.1002/celc.201801780}, author = {Soni, Roby and Bhange, Siddheshwar N. and Athira, E. and Chetry, Rashmi and Kurungot, Sreekumar} } @article {46175, title = {Targeted phenotypic screening in plasmodium falciparum and toxoplasma gondii reveals novel modes of action of medicines for malaria venture malaria box molecules (vol 3, e00534-17, 2018)}, journal = {MSphere}, volume = {4}, year = {2019}, month = {APR}, pages = {e00159-19}, type = {Correction}, issn = {2379-5042}, doi = {10.1128/mSphere.00159-19}, author = {Subramanian, Gowtham and Belekar, Meenakshi A. and Shukla, Anurag and Tong, Jie Xin and Sinha, Ameya and Chu, Trang T. T. and Kulkarni, Akshay S. and Preiser, Peter R. and Reddy, D. Srinivasa and Tan, Kevin S. W. and Shanmugam, Dhanasekaran and Chandramohanadas, Rajesh} } @article {46244, title = { Temperature-dependent phonon dynamics of supported and suspended monolayer tungsten diselenide }, journal = {AIP Advances}, volume = {9}, year = {2019}, month = {AUG}, type = {Article}, abstract = {

Two-dimensional materials exhibit great potential for high-performance electronics applications and the knowledge of their thermal properties is extremely necessary, since they are closely related to efficient heat dissipation and electron-phonon interactions. In this study we report the temperature-dependence of the out-of-plane A(1g) Raman mode of suspended and supported CVD-grown single-crystalline tungsten diselenide (WSe2) monolayer. The A(1g) phonon wavenumber is linearly red-shifted for temperature ranging from 98 to 513 K, with first-order temperature coefficients beta of -0.0044 and -0.0064 cm(-1)/K for suspended and supported monolayer WSe2, respectively. The higher beta module value for supported sample is attributed to the increase of the phonon anharmonicity due to the phonon scattering with the surface roughness of the substrate. Our analysis of the temperature-dependent phonon dynamics reveal the influence of the substrate on thermal properties of monolayer WSe2 and provide fundamental information for developing of atomically-thin 2D materials devices. (C) 2019 Author(s).

}, doi = {10.1063/1.5118004}, author = {Carvalho, Thais C. V. and Araujo, Francisco D. V. and dos Santos, Clenilton Costa and Alencar, Luciana M. R. and Ribeiro-Soares, Jenaina and Late, Dattatray J. and Lobo, Anderson Oliveira and Souza Filho, Antonio Gomes and Alencar, Rafael S. and Viana, Bartolomeu C.} } @article {46185, title = {Temperature-dependent photoluminescence and energy-transfer dynamics in Mn2+-doped (C4H9NH3)(2)PbBr4 two-dimensional (2D) layered perovskite}, journal = {Journal of Physical Chemistry C}, volume = {123}, year = {2019}, month = {FEB}, pages = {4739-4748}, type = {Article}, abstract = {

Reported here are the low-temperature photoluminescence (PL), energy-transfer mechanism, and exciton dynamics of Mn2+-doped two-dimensional (2D) perovskites that show interesting differences from their three-dimensionally doped counterpart. Dopant emission in 2D system shows increased PL intensity and shortened lifetime with increase of temperature and strong dopant emission even at low temperatures. Transient absorption (TA) spectroscopy reveals the dominant role of {\textquoteleft}{\textquoteleft}hot{\textquoteright}{\textquoteright} excitons in dictating the fast energy-transfer timescale. The operative dynamics of the generated hot excitons include filling up of existing trap states (shallow and deep) and energy-transfer channel from hot excitons to dopant states. Global analysis and target modeling of TA data provide an estimate of excitons (hot and band edge) to a dopant energy-transfer timescale of similar to 330 ps, which is much faster than the band edge exciton lifetime (similar to 2 ns). Such fast energy-transfer timescale arises due to enhanced carrier exchange interaction resulting from higher exciton confinement, increased covalency, and involvement of hot excitons in the 2D perovskites. In stark contrast to three-dimensional systems, the high energy-transfer rate in 2D system results in high dopant emission intensity even at low temperatures. Increased intrinsic vibronic coupling at higher temperatures further supports efficient Mn2+ sensitization that ultimately dictates the observed temperature dependence of the dopant emission (intensity, lifetime).

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.9b00207}, author = {Bakthavatsalam, Rangarajan and Biswas, Anupam and Chakali, Madhu and Bangal, Prakriti Ranjan and Kore, Bhushan P. and Kundu, Janardan} } @article {46191, title = {Thermodynamic view of dynamic allostery in a PDZ domain protein}, journal = {Biophysical Journal}, volume = {116}, year = {2019}, month = {FEB }, pages = {163A}, type = {Meeting Abstract}, issn = {0006-3495}, doi = {10.1016/j.bpj.2018.11.905}, author = {Kumawat, Amit and Chakrabarty, Suman} } @article {46115, title = {Total synthesis of (+/-)-quinagolide: a potent D-2 receptor agonist for the treatment of hyperprolactinemia}, journal = {ACS Omega}, volume = {4}, year = {2019}, month = {MAY}, pages = {8231-8238}, type = {Article}, abstract = {

A potent dopamine (D-2) receptor agonist (+/-)-quinagolide, which is used for the treatment of hyperprolactinemia, was synthesized using the ring closing metathesis (RCM) approach from meta-hydroxybenzaldehyde as the starting material. The key features of this synthesis are pyrolytic elimination, late-stage expedient synthesis of functionalized trans-fused tetrahydropyridine-3-carboxylates from olefin 6, via conjugate addition-elimination upon acetate 11, followed by RCM and phenyliodine bis(trifluoroacetate) (PIFA)-mediated Hofmann rearrangement of piperidine-3-carboxamide, which enables the synthesis of 3-aminopiperidine skeleton of quinagolide. For the total synthesis of natural products such as ergot alkaloids, late-stage synthesis of functionalized trans-fused tetrahydropyridine-3-carboxylates using RCM and PIFA-mediated Hofmann rearrangement of piperidine-3-carboxamide, which allows quick access to the synthetically challenging 3-aminopiperidine skeleton, are the main achievements of the present work.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b00903}, author = {Chavan, Subhash P. and Kadam, Appasaheb L. and Kawale, Sanket A.} } @article {44433, title = {VSe2-reduced graphene oxide as efficient cathode material for field emission}, journal = {Journal of Physics and Chemistry of Solids }, volume = {128}, year = {2019}, month = {MAY}, pages = {384-390}, type = {Journal Article}, abstract = {

Field emission properties of pristine VSe2 and its hybrid with reduced graphene oxide (RGO) have been investigated in detail. Promising field emission performance were noted with lower values of turn-on and threshold fields of \~{}1.3 V μm-1 and 2.12 V μm-1 respectively for the VSe2/RGO hybrid which is much more superior than that of pristine VSe2 emitter and other 2D materials. Density Functional Theory (DFT) simulations have also been performed to qualitatively support our experimental observations through demonstration of Density of States and computation of work function for pristine VSe2 and hybrid VSe2/RGO. The lowering of work function and appearance of additional states near Fermi level from carbon p orbital of RGO is responsible for superior field emission characteristics in hybrid VSe2/RGO compared to pristine VSe2 which supports our experimental observations. Our experimental data and theoretical insight from electronic structure simulations strongly infer that the synthesized hybrid VSe2/RGO has the potential to be tailored as efficient and high performance cathode material in field emission based devices.

}, keywords = {cathode material, Chalcogenide, Density functional theory, field emission, Vanadium diselenide, Work function}, issn = {223697}, doi = {10.1016/j.jpcs.2018.02.020}, author = {Ratha, S.}, editor = {Bankar, P.} } @article {46431, title = {Water-assisted stability of carbene: cyclic voltammetric investigation of 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid}, journal = {Physical Chemistry Chemical Physics}, volume = {21}, year = {2019}, month = {NOV }, pages = {24126-24131}, type = {Article}, abstract = {

In this work, we report electrochemical studies on imidazolium-based ionic liquids with an objective to explore the possibility of carbene formation in their dilute aqueous solutions. Conventionally, water plays a detrimental role during investigations involving ionic liquids, and this role has been investigated via electrochemical studies in aqueous ionic liquid solutions. There are varying opinions regarding the influence of water on the physicochemical behaviour of ionic liquids that require an in-depth understanding. To eludicate the role of water, we attempted to evaluate the electrochemical performance of ionic liquids in water as a solvent, and the influence of water on ionic liquids was explored through feasibility and stability studies on carbene formed in an aqueous imidazolium-based ionic liquid solution. The electrochemical investigation of an aqueous solution of 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO4]) revealed a redox couple. Detailed investigations suggest that reduction of the imidazolium cation occurs at the C2 position, with subsequent formation of carbene. Furthermore, an anodic peak was found to be associated with the oxidation of carbene. The coulometric process associated with the anodic peaks indicated that the two-electron oxidation of carbene occurred. The stability of carbene in water was evaluated through the use of different protic and aprotic solvents. The hydrogen bond-forming ability of carbene with water seems to be responsible for its improved stability in water.

}, issn = {1463-9076}, doi = {10.1039/c9cp05033g}, author = {Jain, Preeti and Chaudhari, Vijay R. and Kumar, Anil} } @article {46646, title = {Actin-mediated microglial chemotaxis via G-protein coupled purinergic receptor in alzheimer{\textquoteright}s disease}, journal = {Neuroscience}, volume = {448}, year = {2020}, month = {NOV }, pages = {325-336}, type = {Review}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a neurodegenerative disease mainly associated with aging, oxidative stress and genetic mutations. There are two pathological proteins involved in AD; Amyloid-beta peptide and microtubule-associated protein Tau (MAPT). The beta- and gamma-secretase enzyme cleaves the Amyloid precursor protein, which results in the formation of extracellular plaques in brain. While, Tau undergoes hyperphosphorylation and other post-translational modifications (PTMs), which eventually generates Tau oligomers, and intracellular neurofibrillary tangles (NFTs) in neurons. Moreover, the brain-resident glia and infiltrated macrophages elevate the level of CNS inflammation, which trigger the oxidative damage of neuronal circuits by reactive oxygen species (ROS) and Nitric oxide (NO). Microglia is the primary immune cell in the CNS, which is continuously surveilling the neuronal synapses and pathogen invasion. Microglia in the resting state is called {\textquoteleft}Ramified{\textquoteright}, which possess long surveilling extensions with a small cell body. But, upon activation, microglia retracts the cellular extensions and transform into round migratory cells, called as {\textquoteleft}Amoeboid{\textquoteright} state. Activated microglia undergoes actin remodeling by forming lamellipodia and filopodia, which directs the migratory axis while podosomes formed are involved in extracellular matrix degradation for invasion. Protein-aggregates in malfunctioning synapses and in CNS milieu can be detected by microglia, which results in its activation and migration. Subsequently, the phagocytosis of synapses leads to the inflammatory burst and memory loss. The extracellular nucleotides released from damaged neurons and the cytokine-chemokine gradients allow the neighboring microglia and macrophages to migrate-infiltrate at the site of neuronal-damage. The ionotropic (P2XR) and metabotropic (P2YR) purinergic receptor recognize extracellular ATP/ADP, which propagates through the intracellular calcium signaling, chemotaxis, phagocytosis and inflammation. The P2Y receptors give {\textquoteleft}find me{\textquoteright} or {\textquoteleft}eat me{\textquoteright} signals to microglia to either migrate or phagocytose cellular debris. Further, the actin cytoskeleton helps microglia to mediate directed chemotaxis and neuronal repair during neurodegeneration. Hence, we aim to emphasize the connection between purinergic signaling and actin-driven mechanical movements of microglia for migration and inflammation in AD. (C) 2020 IBRO. Published by Elsevier Ltd. All rights reserved.

}, keywords = {actin remodeling, Alzheimer{\textquoteright}s disease, microglia, P2Y signaling, purinergic GPCRs, Tauopathy}, issn = {0306-4522}, doi = {10.1016/j.neuroscience.2020.09.024}, author = {Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {46800, title = {Agro-waste extracted cellulose supported silver phosphate nanostructures as a green photocatalyst for improved photodegradation of RhB dye and industrial fertilizer effluents}, journal = {Nanoscale Advances}, volume = {2}, year = {2020}, month = {JUL }, pages = {2870-2884}, type = {Article}, abstract = {

The efficiency and reusability of photocatalysts are the dominant factors for their pragmatic use. The visible light induced semiconductor silver phosphate is a superior photocatalyst effective under visible light but its stability is still an undiscussed issue. To overcome this stability issue in this present manuscript, eco-friendly agro-waste extracted cellulose supported silver phosphate nanostructures have been designed for the first time through a simple chemical process. At first, silver phosphate nanostructures were synthesized by the co-precipitation method. Then, different weights of cellulose were added to the silver nitrate solution to form cellulose supported silver phosphate nanostructures. The photodegradation efficiency for each weight ratio was examined in which the photocatalyst Ag-8 nanostructures showed a high rate (0.024 min(-1)) for degradation of Rhodamine B (RhB) using a low intensity tungsten bulb. Real sample analysis has also been carried out using this photocatalyst for the degradation of industrial fertilizer effluents. The degradation rate of all the nanostructures was found to be high in comparison to pristine silver phosphate as well as the extracted bare cellulose. The photocatalytic activity is enhanced because of the participation of cellulose as a support which makes an interface for silver phosphate and assists it in delaying the charge recombination period under visible light. To understand the photochemical reaction of electrons and holes, scavenger studies were also performed.

}, issn = {2516-0230}, doi = {10.1039/dOna00181c}, author = {Dwivedi, Pravin K. and Nair, Aathira and Mehare, Rupali S. and Chaturvedi, Vikash and Joshi, Kavita and Shelke, V. Manjusha} } @article {46617, title = {Anticancer potential of AgNPs synthesized using acinetobacter sp. and curcuma aromatica against HeLa cell lines: a comparative study}, journal = {Journal of Trace Elements in Medicine and Biology}, volume = {62}, year = {2020}, month = {DEC}, pages = {126630}, type = {Article}, abstract = {

Background: Biogenic nanoparticles are gaining attention due to their low toxicity and numerous biomedical applications. Present study aimed to compare the potential anticancer activity of two biogenic silver nanoparticles (bAgNPs and pAgNPs) against human cervical cancer cell lines (HeLa). Methods: bAgNPs were synthesized using Acinetobacter sp. whereas pAgNPs were synthesized using aqueous root extract of Curcuma aromatica. Effect of these nanoparticles on HeLa cells viability was studied using MTT assay and colony formation assay. Anticancer potential was determined using fluorescence microscopy and flow cytometry studies. Bio-compatibility studies were performed against peripheral blood mononuclear cells (PBMCs). Results: Both the nanoparticles showed 50 \% viability of peripheral blood mononuclear cells (PBMCs) when used at high concentration (200 mu g/mL). IC50 for bAgNPs and pAgNPs against HeLa cells were 17.4 and 14 mu g/mL respectively. Colony formation ability of Hela cells was reduced on treatment with both nanoparticles. Acridine orange and ethidium bromide staining demonstrated that bAgNPs were cytostatic whereas pAgNPs were apoptotic. JC-1 dye staining revealed that the mitochondrial membrane potential was affected on treatment with pAgNPs while it remained unchanged on bAgNPs treatment. Flow cytometry confirmed cell cycle arrest in HeLa cells on treatment with nanoparticles further leading to apoptosis in case of pAgNPs. About 77 and 58 \% HeLa cells were found in subG1 phase on treatment with bAgNPs and pAgNPs respectively. bAgNPs showed cytostatic effect on HeLa cells arresting the cell growth in subG1 phase, whereas, pAgNPs triggered death of HeLa cells through mitochondrial membrane potential impairment and apoptosis. Conclusion: Overall, bAgNPs and pAgNPs could be safe and showed potential to be used as anticancer nanoantibiotics against human cervical cancer cells.

}, keywords = {Acinetobacter sp., AgNPs, Anticancer, Curcuma aromatica, HeLa cells, PBMCs}, issn = {0946-672X}, doi = {10.1016/j.jtemb.2020.126630}, author = {Nadhe, Shradhda B. and Tawre, Madhumita S. and Agrawal, Sonia and Chopade, Balu A. and Sarkar, Dhiman and Pardesi, Karishma} } @article {46829, title = {Autophagic pathways to clear the tau aggregates in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, year = {2020}, month = {JUN}, type = {Review; Early Access 2020}, abstract = {

Tau is a microtubule-associated protein with an intrinsically unstructured conformation. Tau is subjected to several pathological post-translational modifications (PTMs), leading to its loss of interaction with microtubules and accumulation as neurofibrillary tangles (NFTs) in neurons. Tau aggregates impede functions of endoplasmic reticulum and mitochondria leading to the generation of oxidative stress and in turn amplifying the Tau aggregation. Tau is channelled to chaperones for folding into their native form, which otherwise causes its degradation and clearance. Cellular response triggers the activation of ubiquitin-proteasome system or autophagy to facilitate Tau degradation, based on the PTMs or mutations associated with Tau. Further, autophagy can be selective where Hsc70 interacts with Tau in monomeric, oligomeric and aggregated form and drives its clearance by chaperone-mediated autophagy pathway (CMA). Lysosome-associated membrane proteins-2A (LAMP-2A) is the key player of CMA that recognises Hsc70-Tau complex and triggers the downstream cascade. Thus, it becomes challenging for mutant Tau to be cleared by CMA as it loses its affinity for Hsc70 and LAMP-2A. In such a scenario, Tau might be degraded by macroautophagy otherwise sequestered by aggresomes. Henceforth, the degradation of Tau and its blockage that is associated with various PTMs of Tau would explain the dynamics of Tau degradation or accumulation in AD. Further, unveiling the role of accessory proteins involved in these degradation pathways would help in understanding their loss of function and preventing Tau clearance.

}, keywords = {Alzheimer{\textquoteright}s disease, Chaperone-mediated autophagy, Lysosome-associated membrane proteins-2A, Macroautophagy, Neurofibrillary tangles, Tau, Tau degradation, Ubiquitin-proteasome system}, issn = {0272-4340}, doi = {10.1007/s10571-020-00897-0, Early Access Date = JUN 2020}, author = {Gorantla, Nalini Vijay and Chinnathambi, Subashchandrabose} } @article {46933, title = {Basic limonoid modulates chaperone-mediated proteostasis and dissolve Tau fibrils}, journal = {Scientific Reports}, volume = {10}, year = {2020}, month = {MAR}, pages = {4023}, type = {Article}, abstract = {

The Alzheimer{\textquoteright}s disease pathology is associated with accumulation of intracellular neurofibrillary tangles and extracellular senile plaques. The formation of initial nucleus triggers conformational changes in Tau and leads to its deposition. Hence, there is a need to eliminate these toxic proteins for proper functioning of neuronal cells. In this aspect, we screened the effect of basic limonoids such as gedunin, epoxyazadiradione, azadirone and azadiradione on inhibiting Tau aggregation as well as disintegration of induced Tau aggregates. It was observed that these basic limonoids effectively prevented aggregates formation by Tau and also exhibited the property of destabilizing matured Tau aggregates. The molecular docking analysis suggests that the basic limonoids interact with hexapeptide regions of aggregated Tau. Although these limonoids caused the conformational changes in Tau to beta-sheet structure, the cytological studies indicate that basic limonoids rescued cell death. The dual role of limonoids in Tau aggregation inhibition and disintegration of matured aggregates suggests them to be potent molecules in overcoming Tau pathology. Further, their origin from a medicinally important plant neem, which known to possess remarkable biological activities was also found to play protective role in HEK293T cells. Basic limonoids were non-toxic to HEK293T cells and also aided in activation of HSF1 by inducing its accumulation in nucleus. Western blotting and immunofluorescence studies showed that HSF1 in downstream increased the transcription of Hsp70 thus, aggravating cytosolic Hsp70 levels that can channel clearance of aberrant Tau. All these results mark basic limonoids as potential therapeutic natural products.

}, issn = {2045-2322}, doi = {10.1038/s41598-020-60773-1}, author = {Gorantla, Nalini Vijay and Das, Rashmi and Chidambaram, Hariharakrishnan and Dubey, Tushar and Mulani, Fayaj A. and Thulasiram, V. Hirekodathakallu and Chinnathambi, Subashchandrabose} } @article {46721, title = {Bioinspired synthesis of multifunctional silver nanoparticles for enhanced antimicrobial and catalytic applications with tailored SPR properties}, journal = {Materials Today Chemistry}, volume = {17}, year = {2020}, month = {SEP}, pages = {100285}, type = {Article}, abstract = {

In the developing nanotechnology world, numerous attempts have been made to prepare the nobel metallic nanoparticles (NPs), which can improve their applicability in diverse fields. In the present work, the biosynthesis of silver (Ag) NPs has been successfully achieved through the medicinal plant extract (PE) of G. resinifera and effectively used for the catalytic and antibacterial applications. The size dependant tuneable surface plasmon resonance (SPR) properties attained through altering precursor concentrations. The X-ray and selected area diffraction pattern for Ag NPs revealed the high crystalline nature of pure Ag NPs with dominant (111) phase. The high-resolution TEM images show the nonspherical shape of NPs shifting from spherical, hexagonal to triangular, with wide particle size distribution ranging from 13 to 44 nm. Accordingly, the dual-band SPR spectrum is situated in the UV-Vis spectra validating the non-spherical shape of Ag NPs. The functional group present on the Ag NPs surface was analysed by FT-IR confirms the capping and reducing ability of methanolic PE G. resinifera. Further, the mechanism of antimicrobial activity studied using electron microscope showed the morphological changes with destructed cell walls of E. coli NCIM 2931 and S. aureus NCIM 5021 cells, when they treated with Ag NPs. The Ag NPs were more effective against S. aureus and E. coli with MIC 128 mu g/ml as compared to P. aeruginosa NCIM 5029 with MIC 256 mu g/ml. Apart from this, the reduction of toxic organic pollutant 4-NP to 4-AP within 20 min reveals the excellent catalytic activity of Ag NPs with rate constant k = 15.69 s(-1). (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {Ag NPs, Antibacterial, Catalytic activity, Gardenia resinifera, surface plasmon resonance}, issn = {2468-5194}, doi = {10.1016/j.mtchem.2020.100285}, author = {Parit, S. B. and Karade, V. C. and Patil, R. B. and Pawar, V. N. and Dhavale, R. P. and Tawre, M. and Pardesi, K. and Jadhav, U. U. and Dawkar, V. V. and Tanpure, R. S. and Kim, J. H. and Jadhav, J. P. and Chougale, A. D.} } @article {46827, title = {Catalytic conversion of HMF into ethyl levulinate - a biofuel over hierarchical zeolites}, journal = {Catalysis Communications}, volume = {140}, year = {2020}, month = {JUN}, pages = {105998}, type = {Article}, abstract = {

Catalytic conversion of 5-hydroxymethyl-2-furfuraldehyde (HMF, a biomass-derived platform chemical) into ethyl levulinate (EL) is an attractive approach for producing renewable transport fuels for mitigating global warming. We report here the application of hierarchical zeolites (DZSM-5 and MZSM-5 synthesized by desilication and mesoporous templating approaches, respectively) as solid acid catalysts for this transformation. Hierarchical structure of these zeolites was confirmed by X-ray diffraction, nitrogen-physisorption and electron microscopy, and acidity was determined by temperature-programmed desorption of ammonia. HMF conversion of 94.2\% with EL selectivity of 90.8\% was achieved over the MZSM-5 catalyst. Acidity, pore size and surface properties affected the catalytic activity.

}, keywords = {5-Hydroxymethyl-2-furfuraldehyde (HMF), Biofuel, ethyl levulinate, Hierarchical zeolite, ZSM-5}, issn = {1566-7367}, doi = {10.1016/j.catcom.2020.105998}, author = {Chithra, P. A. and Darbha, Srinivas} } @article {46685, title = {CD44, a predominant protein in methylglyoxal-induced secretome of muscle cells, is elevated in diabetic plasma}, journal = {ACS Omega}, volume = {5}, year = {2020}, month = {OCT }, pages = {25016-25028}, type = {Article}, abstract = {

Methylglyoxal (MG), a glycolytic intermediate and reactive dicarbonyl, is responsible for exacerbation of insulin resistance and diabetic complication. In this study, NIG-induced secretome of rat muscle cells was identified and relatively quantified by SWATH-MS. A total of 643 proteins were identified in MG induced{\textquoteright} secretome, of which 82 proteins were upregulated and 99 proteins were downregulated by more than 1.3-fold in SWATH analysis. Further, secretory proteins from the dassical secretory pathway and nonclassical secretory pathway were identified using SignalP and SecretomeP, respectively. A total of 180 proteins were identified with SignalP, and 113 proteins were identified with SecretomeP. The differentially expressed proteins were functionallyannotated by KEGG pathway analysis using Cytoscape soft ware with plugin clusterMaker. The differentially expressed proteins were{\textquoteright}sfound to he involved m various pathways like extracellular matrix (ECM) receptor interaction, leukocyte transendothelial migration, fluid shear tress and atherosclerosis, complement and coagulation cascades, and lysosomal pathway. Since the MG levels are high in diabetic conditions, the presence of MG-induced isecreted proteins was inspected {\textquoteleft}by profiling human plasma of healthy and diabetic subjects (n = 10 each). CD44, a predominant MG -induced secreted protein, was found to be elevated in the diabetic plasma and to have a role in the development of insulin resistance.

}, issn = {2470-1343}, doi = {10.1021/acsomega.0c01318}, author = {Bai, Shakuntala and Chaurasiya, Arvindkumar H. and Banarjee, Reema and Walke, Prachi B. and Rashid, Faraz and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @inbook {47779, title = {Chapter 9 - CRISPR-Cas9 for therapy: the challenges and ways to overcome them}, booktitle = {Genome Engineering via CRISPR-Cas9 System}, year = {2020}, pages = {101-110}, publisher = {Academic Press}, organization = {Academic Press}, abstract = {Clustered regularly interspaced short palindromic repeat/CRISPR-associated (CRISPR Cas) is a component of the prokaryotic adaptive immune system which has been repurposed for genome editing in recent years. The precision, simplicity and flexibility of this system have opened up a broad range of biological applications covering basic research to biotechnology and medicine. Additionally, the multiplexing capabilities of CRISPR offers a promising approach for modeling or correcting common polygenic disorders along with its monogenic and infectious counterparts. Although CRISPR is not completely precise and questions remain regarding its specificity and modes of delivery, the robustness and wide applicability of this genome editing tool has opened up numerous ways to address these issues. In this chapter, we will discuss about initial progress toward CRISPR therapeutics, existing delivery modalities, the challenges before CRISPR editing before it becomes a therapeutic possibility and the ongoing efforts toward developing a perfect CRISPR system for bench to bedside application.}, keywords = {CRISPR therapeutics, CRISPR-Cas9, iPSC}, isbn = {978-0-12-818140-9}, doi = {10.1016/B978-0-12-818140-9.00009-X}, url = {https://www.sciencedirect.com/science/article/pii/B978012818140900009X}, author = {Sundaram Acharya and Souvik Maiti and Debojyoti Chakraborty}, editor = {Vijai Singh and Pawan K. Dhar} } @article {46597, title = {Chiron approach to formal synthesis of both antipodes of cis 3-hydroxypipecolic acid (vol 55, pg 6423, 2014)}, journal = {Tetrahedron Letters}, volume = {61}, year = {2020}, month = {DEC }, pages = {152644}, type = {Correction}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2020.152644}, author = {Chavan, Subhash P. and Khairnar, Lalit B. and Chavan, Prakash N. and Dumare, Nilesh B. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {46843, title = {Cobalt-based metal complexes prevent repeat tau aggregation and nontoxic to neuronal cells}, journal = {International Journal of Biological Macromolecules}, volume = {152}, year = {2020}, month = {JUN }, pages = {171-179}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a fatal neurodegenerative disorder with an alarming increase in the death rate every year. AD is characterised by an aberrant accumulation of proteins in the form of aggregates. The axonal microtubule-associated protein Tau and arnyloid-beta undergo structural transition to beta-sheet rich structure and form aggregates in neuronal soma as well as in the extracellular region. The loss of Tau from microtubules leads to the disintegration of axon and causing neuronal degeneration. This led to the development of effective drugs against AD, to prevent Tau aggregation. Here, we synthesized and screen metal-based complexes to prevent Tau protein aggregation. ThS fluorescence and TEM suggested the role of synthetic cobalt complexes in inhibiting Tau aggregation. CD spectroscopy showed that these complexes prevented conformational changes in Tau to beta-sheet. CBMCs were not toxic at lower concentrations and formed non-toxic Tau species. L1 and L2 prevented membrane leakage: whereas, higher concentrations of L3 caused membrane leakage as observed by LDH release assay. The overall results indicate the synthetic cobalt complexes to be a promising molecule against AD. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Alzheimer{\textquoteright}s disease, Cobalt-based metals, Tau Aggregation, Tau inhibition, Tau toxicity}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.02.278}, author = {Gorantla, V. Nalini and Balaraman, Ekambaram and Chinnathambi, Subashchandrabose} } @article {47151, title = {Co-gasification of high ash coal{\textendash}biomass blends in a fluidized bed gasifier: }, journal = {Waste and Biomass Valorization }, volume = {11}, year = {2020}, month = {JAN}, pages = {323{\textendash}341}, type = {Article}, abstract = {

Co-gasification (COG) is a clean-coal technology that uses a binary blend of coal and biomass for generating the\ product gas; it is environment-friendly since it emits lesser quantities of pollutants compared to the coal gasification process. Although coals found in many countries contain high percentages of ash, co-gasification studies involving such coals, and the process modeling thereof, are rare. Accordingly, this study presents results of the co-gasification experiments conducted in a fluidized-bed gasifier (FBG) pilot plant using as a feed the blends of high ash Indian coals with three biomasses, namely, rice husk, press mud, and sawdust. Since the underlying physicochemical phenomena are complex and nonlinear, modeling of the COG process has been performed using three\ computational intelligence (CI)-based methods namely, genetic programming, artificial neural networks, and support vector regression. Each of these formalisms was employed separately to develop models predicting four COG performance variables, namely, total gas yield, carbon conversion efficiency, heating value of product gas, and cold gas efficiency. All the CI-based models exhibit an excellent prediction accuracy and generalization performance. The co-gasification experiments and their modeling presented here for a pilot-plant FBG can be gainfully utilized in the efficient design and operation of the corresponding commercial scale co-gasifiers utilizing high ash coals.

}, author = {Tiwary, Shishir and Ghugare, Suhas B. and Chavan, Prakash D. and Saha, Sujan and Datta, Sudipta and Sahu, Gajanan and Tambe, Sanjeev S.} } @article {46480, title = {Degradation of metaldehyde in aqueous solution by nano-sized photocatalysts and granular activated carbon}, journal = {Journal of Nanoscience and Nanotechnology }, volume = {20}, year = {2020}, month = {July }, pages = {4505-4508}, type = {Article}, abstract = {

Metaldehyde has been detected in drinking water system in relatively high concentration exceeding European water quality standard. In order to address this problem, the aim of this project was to treat metaldehyde aqueous solution by advanced oxidation processes (AOPs) and granular activated carbon (GAC) column. Ten novel materials were tested for degradation rates of metaldehyde under ultraviolet light irradiation (UVC). For treatment of 1 mg/L metaldehyde solution by AOPs, the highest degradation rate is 16.59\% under UVC light with the aid of nitrogen doped titanium dioxide coated graphene (NTiO2/Gr). Furthermore, 0.5 mg/L is the optimal concentration for degradation of metaldehyde with N-TiO2/Gr under UVC light. Apart from that, the lifetime of GAC column could be elongated on condition that metaldehyde has been treated by AOPs previously. Hence, combination of AOPs and GAC column is promising in treating water containing metaldehyde.

}, doi = {10.1166/jnn.2020.17595}, author = {Kim, Jong Kyu and Jiang, Tingting and Li, Zhoujun and Mayadevi, Suseeladevi and Bharat, Kale and Joo, Jin Chul and Campos, Luiza Cintra} } @article {46841, title = {Design, expression, and evaluation of novel multiepitope chimeric antigen of Wuchereria bancrofti for the diagnosis of lymphatic filariasis - A structure-based strategy}, journal = {International Immunopharmacology}, volume = {83}, year = {2020}, month = {JUN}, pages = {106431}, type = {Article}, abstract = {

The Global Program for Elimination Lymphatic Filariasis (GPELF) is in an advanced stage and requires tools for diagnosing infection, assessing transmission and certification. This study was aimed at developing an antibody-based assay using a chiemric antigen containing multi-B-cell epitopes from antigens highly expressed in different stages of Wuchereria bancrofti to detect LF infection and its transmission. The antigen was express cloned and two indirect ELISA based (IgG1 \& IgG4 based) antibody assays were developed using the recombinant antigen. The chimeric antigen displayed 1 and 3-fold reactivity with IgG1 and IgG4 antibodies, respectively in microfilaraial (mf) positive sera when compared to that in sera samples of Non-endemic normal sera (NEN) (O.D, 0.13 +/- 0.20 and 0.18 +/- 0.07), thus differentiating infected from uninfected individuals. In IgG1 and IgG4 antibody assays, the multiepitope antigen also showed reactivity (O.D, 0.27 +/- 0.18 and 0.16 +/- 0.03) in a small proportion (18 and 30, respectively out of 156) endemic normal individuals and in IgG1 antibody in a few (4) chronic patients (CP). The antigen did not react with IgG1 or IgG4 antibodies in the sera samples of malaria, scrub typhus, dengue, hookworm, and roundworm helminth cases (0.139 +/- 0.018, 0.144 +/- 0.007 0.17804 +/- 0.007 and 0.162 +/- 0.006), thus showing its high specificity. The sensitivity (\%) and specificity (\%) of the multi-epitope antigen-based IgG1 and IgG4 antibody assays are 100, 98.1 and 100, 99.52, respectively. Thus, the recombinant multiepitope antigen appears to have good potential in detecting active LF infection and in assessing its transmission in endemic communities.

}, keywords = {Filariasis, Multi-epitope antigen, Serodiagnosis, Transmission}, issn = {1567-5769}, doi = {10.1016/j.intimp.2020.106431}, author = {Yasin, Nazeer and Laxmanappa, Hoti Sugerappa and Muddapur, Uday M. and Cheruvathur, Jennifer and Prakash, S. M. Uday and Thulasiram, Hirekodathakallu Venkataramaiah} } @article {46869, title = {Discovery of potential multi-target-directed ligands by targeting host-specific SARS-CoV-2 structurally conserved main protease}, journal = {Journal of Biomolecular Structure \& Dynamics}, year = {2020}, month = {MAY}, type = {Article; Early Access 2020}, abstract = {

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has resulted in the current COVID-19 pandemic. Worldwide this disease has infected over 2.5 million individuals with a mortality rate ranging from 5 to 10\%. There are several efforts going on in the drug discovery to control the SARS-CoV-2 viral infection. The main protease (M-Pro) plays a critical role in viral replication and maturation, thus can serve as the primary drug target. To understand the structural evolution of M-Pro, we have performed phylogenetic and Sequence Similarity Network analysis, that depicted divergence of Coronaviridae M-Pro in five clusters specific to viral hosts. This clustering was corroborated with the comparison of M-Pro structures. Furthermore, it has been observed that backbone and binding site conformations are conserved despite variation in some of the residues. These attributes can be exploited to repurpose available viral protease inhibitors against SARS-CoV-2 M-Pro. In agreement with this, we performed screening of similar to 7100 molecules including active ingredients present in the Ayurvedic anti-tussive medicines, anti-viral phytochemicals and synthetic anti-virals against SARS-CoV-2 M-Pro as the primary target. We identified several natural molecules like delta-viniferin, myricitrin, taiwanhomoflavone A, lactucopicrin 15-oxalate, nympholide A, afzelin, biorobin, hesperidin and phyllaemblicin B that strongly binds to SARS-CoV-2 M-Pro. Intrestingly, these molecules also showed strong binding with other potential targets of SARS-CoV-2 infection like viral receptor human angiotensin-converting enzyme 2 (hACE-2) and RNA dependent RNA polymerase (RdRp). We anticipate that our approach for identification of multi-target-directed ligand will provide new avenues for drug discovery against SARS-CoV-2 infection. Communicated by Ramaswamy H. Sarma

}, keywords = {Coronavirus, COVID-19, hACE-2, MPro, multi-target-directed ligand, protease inhibitor, RdRp, SARS-CoV-2 virus}, issn = {0739-1102}, doi = {10.1080/07391102.2020.1760137, Early Access Date = MAY 2020}, author = {Joshi, Rakesh S. and Jagdale, Shounak S. and Bansode, Sneha B. and Shankar, S. Shiva and Tellis, Meenakshi B. and Pandya, Vaibhav Kumar and Chugh, Anita and Giri, Ashok P. and Kulkarni, Mahesh J.} } @article {46830, title = {Distinct metabolic states of a cell guide alternate fates of mutational buffering through altered proteostasis}, journal = {Nature Communications}, volume = {11}, year = {2020}, month = {JUN}, pages = {2926}, type = {Article}, abstract = {

Metabolic changes alter the cellular milieu; can this also change intracellular protein folding? Since proteostasis can modulate mutational buffering, if change in metabolism has the ability to change protein folding, arguably, it should also alter mutational buffering. Here we find that altered cellular metabolic states in E. coli buffer distinct mutations on model proteins. Buffered-mutants have folding problems in vivo and are differently chaperoned in different metabolic states. Notably, this assistance is dependent upon the metabolites and not on the increase in canonical chaperone machineries. Being able to reconstitute the folding assistance afforded by metabolites in vitro, we propose that changes in metabolite concentrations have the potential to alter protein folding capacity. Collectively, we unravel that the metabolite pools are bona fide members of proteostasis and aid in mutational buffering. Given the plasticity in cellular metabolism, we posit that metabolic alterations may play an important role in cellular proteostasis.

}, issn = {2041-1723}, doi = {10.1038/s41467-020-16804-6}, author = {Verma, Kanika and Saxena, Kanika and Donaka, Rajashekar and Chaphalkar, Aseem and Rai, Manish Kumar and Shukla, Anurag and Zaidi, Zainab and Dandage, Rohan and Shanmugam, Dhanasekaran and Chakraborty, Kausik} } @article {46842, title = {Effect of melatonin on tau aggregation and tau-mediated cell surface morphology}, journal = {International Journal of Biological Macromolecules}, volume = {152}, year = {2020}, month = {JUN }, pages = {30-39}, type = {Article}, abstract = {

Aggregation of Microtubule-associated protein Tau and its deposition in the form of neurofibrillary tangles (NFTs) is one of the pathological hallmarks of Alzheimer{\textquoteright}s disease (AD). Tau aggregation inhibition has been targeted in various studies including natural compounds and synthetic small molecules. Here, we have studied neurohormone- Melatonin against in vitro Tau aggregation and observed its effect on membrane topology, tubulin network and Tau phosphorylation in Neuro2A and N9 cell lines. The aggregation and conformation of Tau was determined by ThT fluorescence and CD spectroscopy respectively. The morphology of Tau aggregates in presence and absence of Melatonin was studied by transmission electron microscopy. Melatonin was found to reduce the formation of higher order oligomeric structures without affecting the overall aggregation kinetics of Tau. Melatonin also modulates and helps to maintain membrane morphology, independent on tubulin network as evidenced by FE-SEM and immunofluorescence analysis. Overall, Melatonin administration shows mild anti-aggregation and cytoprotective effects. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Alzheimer{\textquoteright}s disease, Cell surface morphology, melatonin, Paired helical filaments, tau protein, Tauopathies}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.01.296}, author = {Das, Rashmi and Balmik, Abhishek Ankur and Chinnathambi, Subashchandrabose} } @article {46767, title = {Efficacy of clay catalysts for the dehydration of fructose to 5-hydroxymethyl furfural in biphasic medium}, journal = {Journal of Porous Materials}, volume = {27}, year = {2020}, month = {DEC}, pages = {1691-1700}, type = {Article}, abstract = {

5-Hydroxymethyl furfural (HMF) is one of the important platform chemical obtained from C6 sugars derived from biomass. The efficiency of montmorillonite clay catalysts (K-10, K-20, K-30, and Al pillared clay) has been systematically explored for the synthesis of HMF through dehydration of fructose in a biphasic solvent system. The catalysts were characterized by XRD, N(2)sorption,Al-27 MAS NMR,Si-29 NMR and FT-IR of chemisorbed pyridine. Acid treated K-10 catalyst was found to be the best among the clay catalysts tested. Various reaction parameters such as reaction temperature, catalyst content, solvent were optimized for achieving better yield of HMF. Under optimized reaction conditions, K-10 catalyst affords 80 mol\% fructose conversion with HMF yield of 61 mol\%. Insight into the type of acid sites essential for such cascade reactions has been furnished. Utilization of clay catalysts for HMF production will be beneficial to improve overall economics for the production of platform chemicals like HMF from biomass-derived raw materials.

}, keywords = {5-hydroxymethyl furfural, Acidity, Clays, fructose, Insights}, issn = {1380-2224}, doi = {10.1007/s10934-020-00943-8, Early Access Date = JUL 2020}, author = {Lucas, Nishita and Nagpure, Atul S. and Gurrala, Lakshmiprasad and Gogoi, Pranjal and Chilukuri, Satyanarayana} } @article {46713, title = {Efficient method for the synthesis of quinoxaline derivatives catalyzed by titanium silicate-1}, journal = {Research on Chemical Intermediates}, volume = {46}, year = {2020}, month = {DEC}, pages = {5219-5230}, type = {Article}, abstract = {

A series of quinoxaline derivatives were efficiently synthesized by convenient and simple procedure in excellent yields using 1 wt.\% of titanium silicate (TS-1) catalyzed reaction of 1,2-diamines and 1,2-diketones in methanol at room temperature. This reaction is scalable to multigram scale and the catalyst is recyclable. [GRAPHICS] .

}, keywords = {2-Diketones, Aromatic 1, o-Phenylenediamine, Quinoxaline, Room temperature, Titanium silicate-1}, issn = {0922-6168}, doi = {10.1007/s11164-020-04258-w, Early Access Date = SEP 2020}, author = {Chandrachood, Pranav S. and Jadhav, Amol R. and Garud, Dinesh R. and Deshpande, Nirmala R. and Puranik, Vedavati G. and Kashalkar, Rajashree V.} } @article {46768, title = {EGCG impedes human Tau aggregation and interacts with Tau}, journal = {Scientific Reports}, volume = {10}, year = {2020}, month = {JUL}, pages = {12579}, type = {Article}, abstract = {

Tau aggregation and accumulation is a key event in the pathogenesis of Alzheimer{\textquoteright}s disease. Inhibition of Tau aggregation is therefore a potential therapeutic strategy to ameliorate the disease. Phytochemicals are being highlighted as potential aggregation inhibitors. Epigallocatechin-3-gallate (EGCG) is an active phytochemical of green tea that has shown its potency against various diseases including aggregation inhibition of repeat Tau. The potency of EGCG in altering the PHF assembly of full-length human Tau has not been fully explored. By various biophysical and biochemical analyses like ThS fluorescence assay, MALDI-TOF analysis and Isothermal Titration Calorimetry, we demonstrate dual effect of EGCG on aggregation inhibition and disassembly of full-length Tau and their binding affinity. The IC50 for Tau aggregation by EGCG was found to be 64.2 mu M.

}, issn = {2045-2322}, doi = {10.1038/s41598-020-69429-6}, author = {Sonawane, Shweta Kishor and Chidambaram, Hariharakrishnan and Boral, Debjyoti and Gorantla, Nalini Vijay and Balmik, Abhishek Ankur and Dangi, Abha and Ramasamy, Sureshkumar and Marelli, Udaya Kiran and Chinnathambi, Subashchandrabose} } @article {46861, title = {Electrostatic manifestation of micro-heterogeneous solvation structures in deep-eutectic solvents: a spectroscopic approach}, journal = {Journal of Physical Chemistry B}, volume = {124}, year = {2020}, month = {MAY }, pages = {3709-3715}, type = {Article}, abstract = {

Deep eutectic solvents have emerged as inexpensive green alternatives to conventional solvents for diverse applications in chemistry and biology. Despite their importance as useful media in various applications, little is known about the microscopic solvation structures of deep eutectic solvents around solutes. Herein, we show that the electrostatic field, which can be estimated both from infrared experiments and theory, can act as a unified concept to report on the microscopic heterogeneous solvation of deep eutectic solvents. Using a fluorophore containing the carbonyl moiety as the solute and the electrostatic field as a descriptor of the solvation structure of the deep eutectic solvents, we report the residue-specific distribution, orientation, and hydrogen bonding in deep eutectic solvents constituting of choline chloride and alcohols of varying chain-lengths. We observe that an increase in alcohol chain-length not only affects the alcohol{\textquoteright}s propensity to form hydrogen bond to the solute but also alters the spatial arrangement of choline cations around the solute, thereby leading to a microheterogeneity in the solvation structure. Moreover, to extend our electrostatic field based strategy to other deep eutectic solvents, we report an emission spectroscopy based method. We show that this method can be applied, in general, to all deep eutectic solvents, irrespective of their constituents. Overall, this work integrates experiments with molecular dynamics simulations to provide insights into the heterogeneous DES solvation.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.9b11352}, author = {Chatterjee, Srijan and Haldar, Tapas and Ghosh, Deborin and Bagchi, Sayan} } @article {46837, title = {Engineering pore morphology using silica template route over mesoporous cobalt oxide and its implications in atmospheric pressure carbon dioxide hydrogenation to olefins}, volume = {19}, year = {2020}, month = {JUN}, pages = {100586}, type = {Article}, abstract = {

Highly ordered mesoporous cobalt oxides (denoted as m-Co-KIT-6 and m-Co-SBA-15) with three dimensional and two dimensional pore morphology respectively have been synthesized using 3D KIT-6, and 2D SBA-15 as silica template via nanocasting route. CO2 hydrogenation activity was evaluated for these mesoporous materials under atmospheric pressure conditions. In comparison to nanoparticles of cobalt oxide (Co3O4-nano), mesoporous catalysts showed excellent activity for CO2 hydrogenation due to their higher number of exposed active sites and lower mass diffusion limitations. The ordered mesoporous structure of Co3O4 catalysts favored the chain growth of carbon atoms for the production of C2+ hydrocarbons while Co3O4 nanoparticles showed strong selectivity toward CH4. High selectivity for C2+ (similar to 25\%) was obtained for both m-Co-KIT-6 and m-Co-SBA-15 catalysts at 320 degrees C. In addition, the 3D pore structure of m-Co-KIT-6 catalyst exclusively formed more olefins (54.9\%) fraction. (C) 2020 Published by Elsevier Ltd.

}, keywords = {CO2 hydrogenation, Mesoporous CO3O4, Olefin fraction, Pore morphology, Silica hard template}, issn = {2352-9407}, doi = {10.1016/j.apmt.2020.100586}, author = {Gupta, Sharad and Ciotonea, Carmen and Royer, Sebastien and Dacquin, Jean-Philippe and Vinod, C. P.} } @article {46929, title = {Enhancing titers and productivity of rCHO clones with a combination of an optimized fed-batch process and ER-stress adaptation}, journal = {Journal of Biotechnology}, volume = {311}, year = {2020}, month = {MAR}, pages = {49-58}, type = {Article}, abstract = {

To increase the productivity of rCHO cells, many cell engineering approaches have been demonstrated that over-express or knockout a specific gene to achieve increased titers. In this work, we present an alternate approach, based on the concept of evolutionary adaptation, to achieve cells with higher titers. rCHO cells, producing a monoclonal antibody, are adapted to ER-stress, by continuous culturing under increasing concentration of tunicamycin. A sustained higher productivity of at-least 2-fold was achieved in all the clones, in a concentration-dependent manner. Similarly, a 1.5-2 fold increase in final titers was also achieved in the batch culture. Based on metabolic analysis of the adapted cells, a fed-batch process was designed where significantly higher titersare achieved as compared to control. Metabolic flux analysis is employed in addition with gene expression analysis of key genes to understand the basis of increased performance of the adapted cells. Overall, this work illustrates how process modifications and cellular adaptation can be used in synergy to drive up product titers.

}, keywords = {Adaptive laboratory evolution, CHO cells, ER-stress, Fed-batch, Increased productivity and titers, Recombinant protein production, UPR pathway}, issn = {0168-1656}, doi = {10.1016/j.jbiotec.2020.02.008}, author = {Chandrawanshi, Vikas and Kulkarni, Rohan and Prabhu, Anuja and Mehra, Sarika} } @article {46913, title = {Enolate-mediated regioselective synthesis of 1,2,3-triazoles via azide-aldehydes or ketones [3+2]-cycloaddition reactions in aqueous phase}, journal = {Tetrahedron Letters}, volume = {61}, year = {2020}, month = {MAR}, pages = {151662}, type = {Article}, abstract = {

A synthetic route for the direct conversion of arylazides into the corresponding trizoles via phase transfer catalyst-assisted [3+2] cycloaddition reaction under basic conditions in aqueous medium is reported. This synthetic methodology, which offers high yields and excellent regioselectivity for varieties of triazoles at 100 degrees C for 24 h-48 h and this {\textquoteleft}greener{\textquoteright} synthesis constitutes an alternative to the previously reported well established click reactions. Published by Elsevier Ltd.

}, keywords = {Azides plus aldehydes or ketones, Click chemistry, triazoles, Water}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2020.151662}, author = {Tripathi, Anupam and Rode, V, Chandrashekhar and Llop, Jordi and Chavan, Subhash P. and Joshi, Sameer M.} } @article {46919, title = {Enteric pH responsive cargo release from PDA and PEG coated mesoporous silica nanoparticles: a comparative study in Drosophila melanogaster}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {MAR }, pages = {11716-11726}, type = {Article}, abstract = {

Physiological stimulus-specific cargo release from nanoparticle carriers is a holy grail of drug delivery research. While the majority of such work is carried out in vitro with cell lines, widespread use of common mammalian model systems - mice and rats - is difficult due to the associated cost and regulatory restrictions. Here we use the inexpensive, easily reared, excellent genetic model system Drosophila melanogaster to test pH responsive cargo release from widely used mesoporous silica nanoparticles (MSNs) coated with pH sensitive polydopamine (PDA) and polyethylene glycol (PEG) polymers. We synthesized 650 +/- 75 nm diameter PDA or PEG coated mesoporous silica nanoparticles loaded with a fluorescent dye and fed to individual adult flies. Subsequently, the passage of the particles were monitored through the fly gut. As in mammals, the fly intestine has multiple pH specific zones that are easily accessible for imaging and also genetic, biochemical or physiological manipulations. We observed that both the species of MSNs ruptured around the acidic (pH \< 4.0) middle midgut of the flies. PEG coated particles showed sharper specificity of release in the acidic middle midgut of flies than the PDA coated ones and had less tendency to clump together. Our results clearly show that the Drosophila gut can be used as a model to test pH responsive biocompatible materials in vivo. Our work paves the way for greater use of Drosophila as an in vivo complete systemic model in drug delivery and smart materials research. It also suggests that such specific delivery of chemical/biological cargo can be exploited to study basic biology of the gut cells and their communication with other organs.

}, doi = {10.1039/c9ra11019d}, author = {Sapre, Nidhi and Chakraborty, Rusha and Purohit, Poorvi and Bhat, Suresh and Das, Gaurav and Bajpe, Sneha R.} } @article {46765, title = {Evaluation of biomolecular interactions and cytotoxic activity of organometallic binuclear Ru(II) complexes of ferrocenyl thiosemicarbazones}, journal = {Journal of Biomolecular Structure \& Dynamics}, year = {2020}, month = {JUL}, type = {Article; Early Access}, abstract = {

{Four new ferrocenyl substituted thiosemicarbazone ligands (L1-L4) and their corresponding binuclear ruthenium(II) arene complexes of the general type [(eta(6)-pcym)(L)Ru(mu-im)Ru(L)(eta(6)-p-cym)]Cl (C1-C4) and [(eta(6)-pcym)(L)Ru(mu-azpy)Ru(L)(eta(6)-p-cym)]Cl-2(C5-C8) (cym = cymene

}, keywords = {binuclear ruthenium(II) complexes, BSA binding interactions, DNA, Ferrocenyl thiosemicarbazone, HeLa human cervical carcinoma}, issn = {0739-1102}, doi = {10.1080/07391102.2020.1798284}, author = {Khanvilkar, Priyanka and Dash, Soumya R. and Vohra, Alisagar and Devkar, Ranjitsinh and Chakraborty, Debjani} } @article {46801, title = {Experimental and theoretical investigations of the effect of heteroatom-doped carbon microsphere supports on the stability and storage capacity of nano-Co3O4 conversion anodes for application in lithium-ion batteries}, journal = {Nanoscale Advances}, volume = {2}, year = {2020}, month = {JUL }, pages = {2914-2924}, type = {Article}, abstract = {

Conversion-type anode materials have been intensely studied for application in Li-ion batteries (LIBs) due to their potentially higher capacities than current graphite-based anodes. This work reports the development of a high-capacity and stable anode from a nanocomposite of N and S co-doped carbon spheres (NSCSs) with Co3O4 (NSCS-Co3O4). A hydrothermal reaction of saccharose withl-cysteine was carried out, followed by its carbonization. CSs when used as supports for conversion-type materials provide efficient electron/ion transfer channels, enhancing the overall electrochemical performance of the electrodes. Additionally, the heteroatoms doped in a carbon matrix alter the electronic properties, often increasing the reactivity of the carbon surface, and they are reported to be effective for anchoring metal oxide nanoparticles. Consequently, the NSCS-Co3O4 nanocomposites developed in this work exhibit enhanced and stable reversible specific capacity over several cycles. Stable cycling behavior was observed at 1 A g(-1)with 1285 mA h g(-1) of specific capacity retained after 350 cycles along with more than 99\% of coulombic efficiency. This material shows excellent rate capability with a specific capacity of 745 mA h g(-1) retained even at a high current density of 5 A g(-1). Detailed DFT-based calculations revealed the role of doped supports in controlling the volume expansion upon lithiation.

}, issn = {2516-0230}, doi = {10.1039/dOna00261e}, author = {Dwivedi, Pravin K. and Nair, Aathira and Mehare, Rupali S. and Chaturvedi, Vikash and Joshi, Kavita and Shelke, V, Manjusha} } @article {47012, title = {Exploring the pharmacological potentials of biosurfactant derived from planococcus maritimus SAMP MCC 3013}, journal = {Current Microbiology}, volume = {77}, year = {2020}, month = {MAR}, pages = {452-459}, type = {Article}, abstract = {

Therapeutic potential of biosurfactant (BS) has been improved in recent years. Our present study deals with production of BS from Planococcus maritimus SAMP MCC 3013 in a mineral salt medium (MSM) supplemented with glucose (1.5\% w/v). Further, BS has been purified and partially characterized as glycolipid type through our previous publication. Current research article aimed to evaluate biological potential of BS against Mycobacterium tuberculosis, Plasmodium falciparum and cancerous cell lines. Planococcus derived glycolipid BS was found to be a promising inhibitor of M. tuberculosis (MTB) H37Ra at IC50 64.11 +/- 1.64 mu g/mL and MIC at 160.8 +/- 1.64 mu g/mL. BS also showed growth inhibition of P. falciparum at EC50 34.56 +/- 0.26 mu M. Additionally, BS also displayed the cytotoxicity against HeLa (IC50 41.41 +/- 4.21 mu g/mL), MCF-7 (IC50 42.79 +/- 6.07 mu g/mL) and HCT (IC50 31.233 +/- 5.08 mu g/mL) cell lines. Molecular docking analysis was carried for the most popular glycolipid type BS namely Rhamnolipid (RHL) aiming to interpret the possible binding interaction for anti-tubercular and anti-cancer activity. This analysis revealed the involvement of RHL binding with enoyl reductase (InhA) of M. tuberculosis. Docking studies of RHL with tubulin directed several hydrophobic and Vander Waal interactions to exhibit anti-cancer potential. The present study will be helpful for further development of marine bioactive molecules for therapeutic applications. Their anti-tubercular, anti-plasmodial and cytotoxic activities make BS molecules as a noteworthy candidate to combat several diseases. To the best of our knowledge, this is the first report on projecting the pharmacological potential of Planococcus derived BS. Graphic

}, issn = {0343-8651}, doi = {10.1007/s00284-019-01850-1, Early Access Date = JAN 2020}, author = {Waghmode, Samadhan and Swami, Sagar and Sarkar, Dhiman and Suryavanshi, Mangesh and Roachlani, Sneha and Choudhari, Prafulla and Satpute, Surekha} } @article {46992, title = {Furan-derived chiral bicycloaziridino lactone synthon: collective syntheses of oseltamivir phosphate (Tamiflu), (S)-pipecolic acid and its 3-hydroxy derivatives}, journal = {Chemistry-An Asian Journal}, volume = {15}, year = {2020}, month = {FEB }, pages = {415-424}, type = {Article}, abstract = {

A unified synthetic strategy for oseltamivir phosphate (tamiflu), (S)-pipecolic acid, and its 3-hydroxy derivatives from furan derived common chiral bicycloaziridino lactone synthon is described here. Key features are the short (4-steps), enantiopure, and decagram-scale synthesis of common chiral synthon from furan and its first-ever application in the total synthesis of biologically active compounds by taking the advantages of high functionalization ability of chiral synthon.

}, keywords = {Aziridine synthon, Chiral auxiliary, collective synthesis, Pipecolic acid, Tamiflu}, issn = {1861-4728}, doi = {10.1002/asia.201901523, Early Access Date = JAN 2020}, author = {Chavan, Subhash P. and Kadam, Appasaheb L. and Shinde, Shrikrishna S. and Gonnade, Rajesh G.} } @article {46807, title = {G-protein coupled receptors and tau-different roles in alzheimer{\textquoteright}s disease}, journal = {Neuroscience}, volume = {438}, year = {2020}, month = {JUL }, pages = {198-214}, type = {Article}, abstract = {

Post-translational modification of Tau, a microtubule-associated protein in the neuronal cell, plays a major role in Alzheimer{\textquoteright}s disease. Tau is an axonal protein expressed in mature neurons that promote the self-assembly of tubulin into microtubules and its stabilization in neurons. Phosphorylation of Tau makes it prone to aggregation at the intra-neuronal region leading to impaired neurotransmission and dementia. Tau aggregates undergo trans-cellular propagation by the release of fibrillar species into the extra-cellular environment from damaged and infected neurons that can be internalized by neighbouring neuronal and glia cells and promotes aggregation in healthy cells. G-protein coupled receptors, the largest group of seven transmembrane receptors, are involved in neuronal signal transduction in response to various signals such as hormones and neurotransmitters. In Alzheimer{\textquoteright}s disease, GPCRs are involved in phosphorylation of Tau through various downstream kinases such as GSK-3b, CDK-5 and ERKs signalling cascade. Several neuronal GPCRs that are involved in Tau phosphorylation are elaborated in this review. The astrocytic GPCR, Tau phosphorylation mediated by CaS receptors and its propagation by exosomes are also elaborated. In the microglia, the extra-cellular Tau binding to a chemokine GPCR, CX3CR1 triggers its internalization, whereas Tau phosphorylation at specific sites decreases its binding affinity to this receptor. Here we highlight the role of GPCRs in Tau phosphorylation and Tau interaction in different cells of the nervous system. Hence, the role of GPCRs are attaining more attention in the therapeutic field of Alzheimer{\textquoteright}s disease. Specific agonists/antagonists and allosteric modulators could be the potential target for therapy against GPCR-mediated Tau phosphorylation in Alzheimer{\textquoteright}s disease. (C) 2020 IBRO. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Alzheimer{\textquoteright}s disease, GPCRs, microglia, Tau internalization, Tau phosphorylation, Tau propagation}, issn = {0306-4522}, doi = {10.1016/j.neuroscience.2020.04.019}, author = {Chidambaram, Hariharakrishnan and Chinnathambi, Subashchandrabose} } @article {46605, title = {HDAC6 ZnF UBP as the modifier of tau structure and function}, journal = {Biochemistry}, volume = {59}, year = {2020}, month = {DEC }, pages = {4546-4562}, type = {Article}, abstract = {

Histone deacetylase 6 is a class H histone deacetylase primarily present in the cytoplasm and involved in the regulation of various cellular functions. It consists of two catalytic deacetylase domains and a unique zinc finger ubiquitin binding protein domain, which sets it apart from other HDACs. HDAC6 is known to regulate cellular activities by modifying the function of microtubules, HSP90, and cortactin through deacetylation. Apart from the catalytic activity of HDAC6, it interacts with other proteins through either the SE14 domain or the ZnF UBP domain to modulate their functions. Here, we have studied the role of the HDAC6 ZnF UBP domain as a modifier of Tau aggregation by its direct interaction with the polyproline region/repeat region of Tau. Interaction of HDAC6 ZnF UBP with Tau was found to reduce the propensity of Tau to self-aggregate and to disaggregate preformed aggregates in a concentration-dependent manner and also bring about the conformational changes in Tau protein. The interaction of HDAC6 ZnF UBP with Tau results in its degradation, suggesting either proteolytic activity of HDAC6 ZnF UBP or its role in enhancing autoproteolysis of Tau.

}, issn = {0006-2960}, doi = {10.1021/acs.biochem.0c00585}, author = {Balmik, Abhishek Ankur and Chidambaram, Hariharakrishnan and Dangi, Abha and Marelli, Udaya Kiran and Chinnathambi, Subashchandrabose} } @article {46834, title = {Highly efficient chemoselective N-tert butoxycarbonylation of aliphatic/aromatic/heterocyclic amines using diphenylglycoluril as organocatalyst}, journal = {Tetrahedron}, volume = {76}, year = {2020}, month = {JUN }, pages = {131223}, type = {Article}, abstract = {

An efficient approach for the Chemoselective N-tert-butoxycarbonylation of a variety of amines using diphenylglycoluril as organocatalyst has been described. For the first time, a plausible mechanism for the N-tert-butoxycarbonylation has been proposed using density functional theory (DFT) calculations supported by NMR studies. The reusability of the organocatalyst and observation of the desired N-Boc protected amines being formed without the formation of side products like urea, oxazolidinone, isocyanate, and N, N-di-Boc derivatives makes the present protocol desirable. (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {DFT studies, Diphenylglycouril, N-tert butoxycarbonylation, organocatalyst, Proton shuttle mechanism}, issn = {0040-4020}, doi = {10.1016/j.tet.2020.131223}, author = {Awasthi, Amardeep and Mukherjee, Anagh and Singh, Mandeep and Rathee, Garima and Vanka, Kumar and Chandra, Ramesh} } @article {46995, title = {Highly enantioselective synthesis of sitagliptin}, journal = {Asian Journal of Organic Chemistry}, volume = {9}, year = {2020}, month = {FEB}, pages = {189-191}, type = {Article}, abstract = {

A highly enantioselective synthesis of sitagliptin, a potent DPP-4 inhibitor, is reported. Explicitly identified chiral FerroLANE ligands in the presence of rhodium catalyze the asymmetric hydrogenation of an enamine to yield sitagliptin with excellent enantioselectivity (98\% ee). The process was scaled up to 5 g and the final product was isolated as a phosphate salt with \>99\% ee.

}, keywords = {asymmetric hydrogenation, catalysis, FerroLANE ligands, Rhodium, sitagliptin}, issn = {2193-5807}, doi = {10.1002/ajoc.201900709, Early Access Date = JAN 2020}, author = {Khopade, V. Kishor and Sen, Anirban and Birajdar, Rajkumar S. and Paulbudhe, Uday P. and Kavale, Dattatry S. and Shinde, Prashant S. and Mhaske, Santosh B. and Chikkali, Samir H.} } @article {46930, title = {Highly sensitive label-free bio-interfacial colorimetric sensor based on silk fibroin-gold nanocomposite for facile detection of chlorpyrifos pesticide}, journal = {Scientific Reports}, volume = {10}, year = {2020}, month = {MAR}, pages = {4198}, type = {Article}, abstract = {

Herein, the preparation of gold nanoparticles-silk fibroin (SF-AuNPs) dispersion and its label-free colorimetric detection of the organophosphate pesticide, namely chlorpyrifos, at ppb level are reported. The silk fibroin solution was extracted from B. mori silk after performing degumming, dissolving and dialysis steps. This fibroin solution was used for synthesis of gold nanoparticles in-situ without using any external reducing and capping agent. X-ray Diffractometry (XRD), Field Emission Transmission Electron Microscopy (FETEM) along with Surface Plasmon Resonance based optical evaluation confirmed generation of gold nanoparticles within SF matrix. The resultant SF-AuNPs dispersion exhibited rapid and excellent colorimetric pesticide sensing response even at 10 ppb concentration. Effect of additional parameters viz. pH, ionic concentration and interference from other pesticide samples was also studied. Notably, SF-AuNPs dispersion exhibited selective colorimetric pesticide sensing response which can be calibrated. Furthermore, this method was extended to various simulated real life samples such as tap water, soil and agricultural products including plant residues to successfully detect the presence of chlorpyrifos pesticide. The proposed colorimetric sensor system is facile yet effective and can be employed by novice rural population and expert researchers alike. It can be exploited as preliminary tool for label-free colorimetric chlorpyrifos pesticide sensing in water and agricultural products.

}, issn = {2045-2322}, doi = {10.1038/s41598-020-61130-y}, author = {Mane, Pramod C. and Shinde, Manish D. and Varma, Sanjana and Chaudhari, Bhushan P. and Fatehmulla, Amanullah and Shahabuddin, M. and Amalnerkar, Dinesh P. and Aldhafiri, Abdullah M. and Chaudhari, Ravindra D.} } @article {46658, title = {Hydrophobic interpenetrating polyamide-PDMS membranes for desalination, pesticides removal and enhanced chlorine tolerance}, journal = {Chemosphere}, volume = {258}, year = {2020}, month = {NOV}, pages = {127179}, type = {Article}, abstract = {

Hydrophobic membranes for desalination and toxic organic pollutant removal have been fabricated using polyamide - PDMS (polydimethylsiloxane) chemistries in a one-step protocol. The curing of polyamide and PDMS are orthogonal and co-curing both networks imparts hydrophobicity to the thin film composite membranes. The membranes exhibit increased adsorption of pesticides from the feed water along with maintaining excellent salt rejection capability (97\% NaCl rejection), thus giving the membranes a multifunctional character. Three toxic pesticides have been used in this study to demonstrate the viability of combining osmosis desalination technology with organic matter adsorption. The membranes also show excellent resistance to fouling by toxic pesticides (85\% salt rejection vs 67\% for commercial membranes in the presence of pesticides) and significantly improved chlorine tolerance (93.8\% salt rejection vs 86.5\% for commercial membranes after 20 h of exposure to sodium hypochlorite solution). (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {PDMS (Polydimethylsiloxane), Pesticide rejection, Salt rejection, Water purification membranes}, issn = {0045-6535}, doi = {10.1016/j.chemosphere.2020.127179}, author = {Khairkar, Shyam R. and Pansare, V, Amol and Shedge, Amol A. and Chhatre, Shraddha Y. and Suresh, A. K. and Chakrabarti, Subhananda and Patil, Vishwanath R. and Nagarkar, Amit A.} } @article {46891, title = {Identification and expression analysis of miRNAs and elucidation of their role in salt tolerance in rice varieties susceptible and tolerant to salinity}, journal = {PloS One}, volume = {15}, year = {2020}, month = {APR}, pages = {e0230958}, type = {Article}, abstract = {

Soil salinization is a serious problem for cultivation of rice, as among cereals rice is the most salt sensitive crop, and more than 40\% of the total agricultural land amounting to approximately 80 million ha the world over is salt affected. Salinity affects a plant in a varieties of ways, including ion toxicity, osmotic stress and oxidative damage. Since miRNAs occupy the top place in biochemical events determining a trait, understanding their role in salt tolerance is highly desirable, which may allow introduction of the trait in the rice cultivars of choice through biotechnological interventions. High throughput sequencing of sRNAs in the root and shoot tissues of the seedlings of the control and NaCl treated Pokkali, a salt-tolerant rice variety, identified 75 conserved miRNAs and mapped 200 sRNAs to the rice genome as novel miRNAs. Expression of nine novel miRNAs and two conserved miRNAs were confirmed by Northern blotting. Several of both conserved and novel miRNAs that expressed differentially in root and/or shoot tissues targeted transcription factors like AP2/EREBP domain protein, ARF, NAC, MYB, NF-YA, HD-Zip III, TCP and SBP reported to be involved in salt tolerance or in abiotic stress tolerance in general. Most of the novel miRNAs expressed in the salt tolerant wild rice Oryza coarctata, suggesting conservation of miRNAs in taxonomically related species. One of the novel miRNAs, osa-miR12477, also targeted L- upon salt treatment, which was confirmed by DAB staining. Thus, salt tolerance might involve miRNA-mediated regulation of 1) cellular abundance of the hormone signaling components like EREBP and ARF, 2) synthesis of abiotic stress related transcription factors, and 3) antioxidative component like LAO for mitigation of oxidative damage. The study clearly indicated importance of osa-miR12477 regulated expression of LAO in salt tolerance in the plant.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0230958}, author = {Parmar, Shaifaly and Gharat, Sachin Ashruba and Tagirasa, Ravichandra and Chandra, Tilak and Behera, Lambodar and Dash, Sushant Kumar and Shaw, Birendra Prasad} } @article {47001, title = {Influence of the ion size on the stability of the smectic phase of ionic liquid crystals}, journal = {Soft Matter}, volume = {16}, year = {2020}, month = {JAN}, pages = {411-420}, type = {Article}, abstract = {

The thermotropic phase behavior of ionic liquids and ionic liquid crystals based on novel N-alkyl-3-methylpyridinium halides, trihalides and dichloroiodates was experimentally studied by polarized optical spectroscopy (POM) and differential scanning calorimetry (DSC) as well as by molecular dynamics (MD) simulation. In the experiments, the existence and thermal range of stability of the smectic phase of these ionic liquid crystals are found to strongly depend on the volume ratio between the cation and anion, that is their relative size. Only compounds with a relatively large volume ratio of the cation to anion, i.e., those with longer cationic alkyl chains and monoatomic halide anions, have a stable smectic A phase. Both melting points and clearing points increase with such a ratio. The MD simulation results qualitatively agree very well with the experimental data and provide molecular details which can explain the experimentally observed phenomena: the stronger van der Waals interactions from the longer alkyl chains and the stronger electrostatic interactions from the smaller anions with a higher charge density increase the stability of both the crystal phase and the smectic phase; this also prevents the ionic layers from easily mixing with the hydrophobic regions, a mechanism that ultimately leads to a nanosegregated isotropic liquid phase.

}, issn = {1744-683X}, doi = {10.1039/c9sm02115a}, author = {Cao, Wudi and Senthilkumar, Beeran and Causin, Valerio and Swamy, Vincent P. and Wang, Yanting and Saielli, Giacomo} } @article {46710, title = {Interaction of Tau with the chemokine receptor, CX3CR1 and its effect on microglial activation, migration and proliferation}, journal = {Cell and Bioscience}, volume = {10}, year = {2020}, month = {SEP}, pages = {109}, type = {Review}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a neurodegenerative disease that leads to progressive loss of memory and dementia. The pathological hallmarks of AD include extracellular accumulation of amyloid-beta peptides forming senile plaques and intracellular accumulation of Tau oligomers and filamentous species. Tau is a microtubule-binding protein that stabilizes tubulin to form microtubules under physiological condition. In AD/ pathological condition, Tau detaches from microtubules and aggregates to form oligomers of different sizes and filamentous species such as paired helical filaments. Microglia are the resident brain macrophages that are involved in the phagocytosis of microbes, cellular debris, misfolded and aggregated proteins. Chemokine receptor, CX3CR1 is mostly expressed on microglia and is involved in maintaining the microglia in a quiescent state by binding to its ligand, fractalkine (CX3CL1), which is expressed in neurons as both soluble or membrane-bound state. Hence, under physiological conditions, the CX3CR1/CX3CL1 axis plays a significant role in maintaining the central nervous system (CNS) homeostasis. Further, CX3CR1/CX3CL1 signalling is involved in the synthesis of anti-inflammatory cytokines and also has a significant role in cytoskeletal rearrangement, migration, apoptosis and proliferation. In AD brain, the expression level of fractalkine is reduced, and hence Tau competes to interact with its receptor, CX3CR1. In microglia, phagocytosis and internalization of extracellular Tau species occurs in the presence of a chemokine receptor, CX3CR1 which binds directly to Tau and promotes its internalization. In this review, the pathophysiological roles of CX3CR1/fractalkine signalling in microglia and neurons at different stages of Alzheimer{\textquoteright}s disease and the possible role of CX3CR1/Tau signalling has been widely discussed.

}, keywords = {Alzheimer{\textquoteright}s disease, CX3CR1 receptor, Fractalkine, microglia, Neuron, Tau}, doi = {10.1186/s13578-020-00474-4}, author = {Chidambaram, Hariharakrishnan and Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {46640, title = {Investigation of bond topological and electrostatic properties of plumbagin molecule: an experimental and theoretical charge density study}, journal = {Journal of Molecular Structure}, volume = {1220}, year = {2020}, month = {NOV}, pages = {128714}, type = {Article}, abstract = {

Plumbagin is a naturally occurring derivative with several medicinal properties including antioxidants, antifungal, antimalarial, leprosy and antitumor properties; their structural and electrostatic properties are yet to be determined. The crystal structure of plumbagin has been solved; it shows that the compound crystallizes in P2(1)/c space group with two molecules in the asymmetric unit. The electron density distribution of both molecules have determined from multipole model refinement. Among all the C-O bonds of both molecules (I \& II), the OH group connected C-O bond and the methyl group connected C-C bond exhibits less electron density and the negative Laplacian of electron density as well. Further, the electrostatic potential (ESP) surface of two plumbagin molecules show some difference in their electronegative regions. The carbonyl O-atoms exhibit high electronegative ESP regions which are the key reactive locations of plumbagin when bind with the active site of target protein and in the ESP map, an aromatic pi-cloud also observed in one of the molecule. The electron density distribution of O-H center dot center dot center dot O intermolecular interactions between the molecules I and II, reveals that these interactions are found very stronger than the other interactions in the crystal. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Dipole moment, Electron density, Electrostatic potential, intermolecular interactions, Plumbagin}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2020.128714}, author = {Kalaiarasi, Chinnasamy and Sivanandam, Magudeeswaran and Suganya, Suresh and Christy, George and Gonnade, Rajesh G. and Hathwar, Venkatesha R. and Kumaradhas, Poomani} } @article {47141, title = {Isothermal cold crystallization kinetics of borassus powder/poly(lactic acid) biocomposites}, journal = {Polymer Crystallization}, volume = {3}, year = {2020}, month = {FEB}, type = {Article}, abstract = {

Poly(lactic acid) (PLA) is an important bioplastic which is semicrystalline with very slow crystallization rate. Therefore, the processed PLA products are usually amorphous and transparent with low mechanical properties. Currently, research efforts are focused on enhancing the crystallization rate of PLA. In this work, natural borassus fibers are incorporated into PLA and the isothermal cold crystallization kinetics is investigated using differential scanning calorimetry and Avrami equation. The isothermal cold crystallization studies revealed that, the relative crystallinity increases with the increasing content of borassus. The Avrami exponent {\textquotedblleft}n{\textquotedblright} was determined ~2.0 indicated the one-dimensional crystal growth with rod-like geometry. The overall crystallization rate increased due to the borassus content and was expressed by crystallization halftime (t1/2). This study clearly showed that borassus fibers act as nucleating agent.

}, doi = {10.1002/pcr2.10097}, author = {Marathe, Yogesh Nana and Chellaswamy, Ramesh and Badiger, Manohar Virupax} } @article {46627, title = {Macro and molecular level insights on gas hydrate growth in the presence of hofmeister salts}, journal = {Industrial \& Engineering Chemistry Research}, volume = {59}, year = {2020}, month = {NOV }, pages = {20591-20600}, type = {Article}, abstract = {

The effect of few monovalent salts (NaCl, NH4Cl, and GdmCl) as additives, according to the Hofrneister series on the growth of methane gas hydrates, has been studied using experiments as well as molecular dynamics (MD) simulation. Further, the Hofmeister effects on hydrate crystallization have been correlated with the methanol as an additive, which is a known thermodynamic hydrate inhibitor for hydrate growth. One of the previous studies (discussed later in this article) available in the literature concludes that methane hydrate formation from ice might show enhanced kinetics in the presence of salts; this behavior is contrary to the general usage of such salts as hydrate inhibitors. This conclusion may not necessarily be true for experiments done with liquid water, and therefore, this work explores the behavior of these salts in a lab-scale setup. In addition, current work reports detailed MD simulation studies to gain insight into the mechanism of hydrate formation in the presence of Hofmeister series salts at two different concentrations of 1 and 10 wt \% in water and compare the results with hydrate formation in the methanol-water system. Our study suggests that the presence of these additives at low concentrations (1 wt \%) does enhance the hydrate growth kinetics. However, at higher concentrations (10 wt \%), inhibition by these additives persisted, and prolonged nucleation, as well as retarded growth, was observed.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.0c04389}, author = {Choudhary, Nilesh and Kushwaha, Omkar Singh and Bhattacharjee, Gaurav and Chakrabarty, Suman and Kumar, Rajnish} } @article {46874, title = {Mechanistic aspects of methanol electro-oxidation reaction through cyclic voltammetry: is it correct to blame carbon monoxide for catalyst poisoning?}, journal = {Energy Technology}, volume = {8}, year = {2020}, month = {MAY}, pages = {1900955}, type = {Article}, abstract = {

The mechanism of the methanol oxidation reaction is revisited using systematic cyclic voltammetric studies. These studies clearly indicate that the peak during the cathodic scan belongs mainly to electro-oxidation of the carbon monoxide, and that only a fraction of this carbon monoxide remains adsorbed on the electrode, contrary to what previous reports suggested. More details can be found in article number by Bhagavatula L. V. Prasad and co-workers.

}, keywords = {carbon monoxide, cyclic voltammetry, electrocatalysts, electrode poisoning, Methanol oxidation}, issn = {2194-4288}, doi = {10.1002/ente.201900955}, author = {Deshpande, Pooja S. and Chaudhari, Vijay R. and Prasad, Bhagavatula L. V.} } @article {46945, title = {Melatonin interacts with repeat domain of Tau to mediate disaggregation of paired helical filaments}, journal = {Biochimica Et Biophysica Acta-General Subjects}, volume = {1864}, year = {2020}, month = {MAR}, pages = {129467}, type = {Article}, abstract = {

Tau is the major neuronal protein involved in the stabilization of microtubule assembly. In Alzheimer{\textquoteright}s disease, Tau self-assembles to form intracellular protein aggregates which are toxic to cells. Various methods have been tried and tested to restrain the aggregation of Tau. Most of the agents tested for this purpose have limitations in their effectiveness and availability to neuronal cells. We have tested melatonin, a neurohormone secreted by pineal gland and a well-known anti-oxidant, for its ability to interact with the repeat domain of Tau using ITC and NMR. In aggregation inhibition and disaggregation studies of repeat Tau, melatonin was found to modulate the aggregation propensity of repeat Tau at a concentration of 5000 mu M and was more effective in dissolving preformed aggregates rather than acting as an aggregation inhibitor. However, there were no major conformational changes in Tau in presence of melatonin as observed by CD spectroscopy. On the basis of our findings, we are proposing a mechanism by which melatonin can interact with the repeat domain of Tau and exhibit its disaggregation effect.

}, keywords = {Alzheimer{\textquoteright}s disease, Disaggregation, melatonin, Paired helical filaments, tau protein, Tauopathies}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2019.129467}, author = {Balmik, Abhishek Ankur and Das, Rashmi and Dangi, Abha and Gorantla, Nalini Vijay and Marelli, Udaya Kiran and Chinnathambi, Subashchandrabose} } @article {46613, title = {Melatonin reduces GSK3 beta-mediated tau phosphorylation, enhances Nrf2 nuclear translocation and anti-inflammation}, journal = {ASN Neuro}, volume = {12}, year = {2020}, month = {DEC}, pages = {1759091420981204}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is a neuropathological condition with abnormal accumulation of extracellular Amyloid-beta plaques and intracellular neurofibrillary tangles of Microtubule-associated protein Tau (Tau) in the brain. In pathological conditions, Tau undergoes post-translational modifications such as hyperphosphorylation by the activity of cellular kinases, which eventually leads to protein aggregation in neurons. Melatonin is a neuro-hormone that is mainly secreted from the pineal gland and functions to modulate the cellular kinases. In our study, we have checked the neuroprotective function of Melatonin by MTT and LDH assay, where Melatonin inhibited the Tau aggregates-mediated cytotoxicity and membrane leakage in Neuro2A cells. The potency of Melatonin has also been studied for the quenching of intracellular reactive oxygen species level by DCFDA assay and caspase 3 activity. Melatonin was shown to reduce the GSK3 beta mRNA and subsequent protein level as well as the phospho-Tau level (pThr181 and pThr212-pSer214) in okadaic acid-induced Neuro2A cells, as observed by western blot and immunofluorescence assay. Further, Melatonin has increased the cellular Nrf2 level and its nuclear translocation as an oxidative stress response in Tauopathy. The Melatonin was found to induce pro- and anti-inflammatory cytokines levels in N9 microglia. The mRNA level of cellular kinases such as as-GSK3 beta, MAPK were also studied by qRT-PCR assay in Tau-exposed N9 and Neuro2A cells. The immunomodulatory effect of Melatonin was evident as it induced IL-10 and TGF-beta cytokine levels and activated MAP3K level in Tau-exposed microglia and neurons, respectively. Melatonin also downregulated the mRNA level of pro-inflammatory markers, IL-1 beta and Cyclooxygenase-2 in N9 microglia. Together, these findings suggest that Melatonin remediated the cytokine profile of Tau-exposed microglia, reduced Tau hyperphosphorylation by downregulating GSK3 beta level, and alleviated oxidative stress via Nrf2 nuclear translocation.

}, keywords = {Alzheimer\&\#8217, Anti-inflammatory, GSK3\&\#946, melatonin, microglia, neurodegeneration, Nrf2, s disease, Tau hyperphosphorylation}, issn = {1759-0914}, doi = {10.1177/1759091420981204}, author = {Das, Rashmi and Balmik, Abhishek Ankur and Chinnathambi, Subashchandrabose} } @article {47315, title = {Metagenome sequencing to unveil microbial community composition and prevalence of antibiotic and metal resistance genes in hypersaline and hyperalkaline Lonar Lake, India}, journal = {Ecological Indicators}, volume = {110}, year = {2020}, month = {MAR}, pages = {105827}, type = {Article}, abstract = {

Lonar Lake (India) is a hyperalkaline and hypersaline soda lake encompassing unique microbial composition and functions. This ecosystem has not been explored for taxonomic diversity and functional aspects (with emphasis on antibiotic and metal resistance genes) using whole metagenome sequencing for multiple years. Bacterial diversity analysis during year 2013, 2016, and 2018 depicted differences in the dominance of Proteobacteria, Firmicutes and Bacteroidetes. For archaeal diversity, a similar pattern persisted with higher abundance of Euryarchaeota. Functional metagenome analyses, indicated presence of antibiotic resistance gene (ARG) and metal resistance gene (MRG) profiles in the lake. A wider continuum of resistance genes with dominant ARG types as multidrug resistance efflux pumps and beta-lactams were also observed. The lake resistome demonstrated fluoroquinolone and acriflavine resistance genes indicating sewage water contamination in the lake. The MRGs linked with resistance to toxic metals (arsenic, cobalt, cadmium, copper, and zinc) and cation efflux protein CusA and cobalt-zinc-cadmium resistance protein revealed metal contamination. This study could be a baseline for understanding prevalence of antibiotic and metal resistance mechanisms resulting from various anthropogenic activities nearby lake, and find integrated approaches for conservation of the precious Lonar Lake ecosystem.

}, keywords = {Archaeal diversity, ARGs, Bacterial diversity, Illumina sequencing, Lonar lake, MRGs}, issn = {1470-160X}, doi = {10.1016/j.ecolind.2019.105827}, author = {Chakraborty, Jaya and Sapkale, Vibhavari and Shah, Manan and Rajput, Vinay and Mehetre, Gajanan and Agawane, Sachin and Kamble, Sanjay and Dharne, Mahesh} } @inbook {47149, title = {Molecular determinants of GPCR oligomerization}, booktitle = {Molecular determinants of GPCR oligomerization}, number = {GPCRs}, year = {2020}, pages = {97-108}, doi = {10.1016/B978-0-12-816228-6.00006-4}, author = {Mohole, Madhura and Kumar, G. Aditya and Sengupta, Durba and Chattopadhyay, Amitabha} } @article {46618, title = {Morphology and dynamics of self-assembled structures in mixed surfactant systems (SDS plus CAPB) in the context of methane hydrate growth}, journal = {Journal of Molecular Liquids}, volume = {319}, year = {2020}, month = {DEC }, pages = {114296}, type = {Article}, abstract = {

Presence of small dosages of surfactants in the aqueous phase has been reported to enhance the rate of gas hydrate (clathrate) formation. In this work, using extensive atomistic molecular dynamics (MD) simulations, we have investigated how SDS (surfactant) aggregates in the presence/absence of CAPB (co-surfactant) at ambient conditions (temperature 298 K and pressure 1 bar) and at hydrate forming conditions (temperature 275 K and pressure 50 bar) resulting in altered growth kinetics of methane hydrate. We observe that SDS forms aggregates of different sizes and shapes depending on the thermodynamic condition starting from random distributions of the surfactants. In the presence of the CAPB co-surfactant, tightly packed mixed aggregates are formed. Using various structural order parameters, we demonstrate that shape of the aggregates deviates from spherical as well as cylindrical symmetry. During the aggregation process in presence of methane, the methane molecules get absorbed into the aggregates, enhance the aggregation kinetics and provide structural flexibility to the aggregates. This result is partly in agreement with previous experimental observations that SDS (with or without a co-surfactant) may form micelle-like structures under hydrate forming conditions and that methane gets absorbed by these aggregates leading to enhanced solubility of methane in the aqueous phase. Further, we have investigated the dynamics of shape fluctuations of the aggregates and observed that several distinct relaxation timescales exist in these heterogenous systems. (C) 2020 Elsevier B.V. All rights reserved.

}, issn = {0167-7322}, doi = {10.1016/j.molliq.2020.114296}, author = {Hande, Vrushali and Choudhary, Nilesh and Chakrabarty, Suman and Kumar, Rajnish} } @article {46655, title = {Nanocomposite of functional silver metal containing curcumin biomolecule model systems: Protein BSA bioavailability}, journal = {Journal of Inorganic Biochemistry}, volume = {212}, year = {2020}, month = {NOV}, pages = {111210}, type = {Article}, abstract = {

Curcumin, a constituent of Curcuma longa L-Zingiberaceae is used in traditional Indian and worldwide medicine and shows anticancer and antioxidant properties. Curcumin has numerous biological and pharmacological ac-tivities but due to its hydrophobic nature, the major drawback is poor absorption and rapid elimination, rendering curcumin with the tag of a poor biomaterial. Hence, there is a need to develop functional metal containing curcumin model systems (FMCCMS) as a metallo-biomolecule to enhance the bioavailability of curcumin. We designed the interaction of silver metal ion with curcumin to form curcumin-silver nanocomposite (CURC-AgNCP) via ultrasonic synthetic route. Formations of FMCCMS were characterized by spectroscopic techniques. The crystalline face-centered cubic pattern and particle size of the nanocomposite was evaluated using X-ray diffraction and high-resolution transmission electron microscopy. The bonding of silver metal to curcumin was confirmed by X-ray photon spectroscopy. Interaction of the nanocomposite with bovine serum albumin (BSA) protein was performed using excitation, emission, and circular dichroism spectroscopy. In binding interaction of BSA, the negative value of Delta S degrees (-358.04 J mol(-1) K-1) and Delta H degrees (-129.42 KJ mol(-1)) demonstrates the hydrophilic nature of the nanocomposite. The binding distance r evaluated according to the Forster resonance energy transfer theory and was 4.69 nm for CURC-AgNCP, which suggested non-radiative transfer of energy between CURC-AgNCP and BSA. The role of FMCCMS metallo-biomolecule CURC-AgNCP in medicine for cancer activity can have immense importance and hence we performed Sulphorhodamine B based in-vitro cytotoxicity assay on human breast cancer Michigan Cancer Foundation-7 cell line.

}, keywords = {Ag-based CURC biomaterials, Breast cancer, Metal in medicine, Metallobiomolecules, Nanocomposite}, issn = {0162-0134}, doi = {10.1016/j.jinorgbio.2020.111210}, author = {Shedge, Amol A. and Pansare, Shubham V. and Khairkar, Shyam R. and Chhatre, Shraddha Y. and Chakrabarti, S. and Nagarkar, Amit A. and Pansare, Amol V. and Patil, Vishwanath R.} } @article {47158, title = {Nanoparticle size-fractionation through self-standing porous covalent organic framework films}, journal = {Angewandte Chemie-International Edition}, volume = {59}, year = {2020}, month = {JAN}, pages = {1161-1165}, type = {Article}, abstract = {

Covalent organic frameworks (COFs) have attracted attention due to their ordered pores leading to important industrial applications like storage and separation. Combined with their modular synthesis and pore engineering, COFs could become ideal candidates for nanoseparations. However, the fabrication of these microcrystalline powders as continuous, crack-free, robust films remains a challenge. Herein, we report a simple, slow annealing strategy to construct centimeter-scale COF films (Tp-Azo and Tp-TTA) with micrometer thickness. The as-synthesized films are porous (SA(BET)=2033 m(2) g(-1) for Tp-Azo) and chemically stable. These COFs have distinct size cut-offs (ca. 2.7 and ca. 1.6 nm for Tp-Azo and Tp-TTA, respectively), which allow the size-selective separation of gold nanoparticles. Unlike, other conventional membranes, the durable structure of the COF films allow for excellent recyclability (up to 4 consecutive cycles) and easy recovery of the gold nanoparticles from the solution.

}, keywords = {covalent organic frameworks, films, nanofilter, Nanoparticles, size-selective separation}, issn = {1433-7851}, doi = {10.1002/anie.201912381, Early Access Date = DEC 2019}, author = {Dey, Kaushik and Kunjattu, Shebeeb H. and Chahande, Anurag M. and Banerjee, Rahul} } @article {47318, title = {Nanoporous covalent organic framework embedded with Fe/Fe3O4 nanoparticles as air-stable low-density nanomagnets}, journal = {ACS Applied Nano Materials}, volume = {3}, year = {2020}, month = {SEP }, pages = {9088-9096}, type = {Article}, abstract = {

Covalent organic frameworks (COFs) made of light atoms such as H, C, N, and O with a significant void-to-framework ratio are excellent low-density supports for nanoparticles (nPs). Their framework can be precoded with heteroatoms to ensure binding with metallic nanoclusters. With these advantages, if controlled amounts of magnetic nPs are anchored to them, they can yield low-density organic-inorganic nanomagnets. Their organic nature facilitates fusion with bulk materials such as paper/textile to enable bulk composites with well-dispersed low-density magnets, which have potential for defense and next-generation aviation applications. Herein, we have grown small Fe/Fe3O4 nPs (5-18 wt \%) inside a COF. Interestingly, 300 mg of this organic-inorganic framework material (containing 50 mg of nPs) can lift a vial of similar to 15,000 mg (300 times heavier). Also, the hydrophobic COF wraps around the Fe/Fe3O4 nanocluster retaining its room-temperature magnetic character even after 1 year, while the naked nPs lose it within a few days because of air oxidation. Bulk composites with paper and polymers have been made using this low-density Fe-COF to demonstrate their processability.

}, keywords = {air-stable nanomagnets, Covalent organic framework, Fe/Fe3O4 nanoparticles, low-density nanomagnets, magnetic rayon, nanoporous COF}, issn = {2574-0970}, doi = {10.1021/acsanm.0c01762}, author = {Kushwaha, Rinku and Kaleeswaran, Dhananjayan and Haldar, Sattwick and Chakraborty, Debanjan and Mullangi, Dinesh and Borah, Aditya and Vinod, Chathakudath P. and Murugavel, Ramaswamy and Vaidhyanathan, Ramanathan} } @article {46915, title = {Nanoporous reduced graphene oxide and polymer composites as efficient counter electrodes in dye-sensitized solar cells}, journal = {ACS Applied Electronic Materials}, volume = {2}, year = {2020}, month = {MAR}, pages = {626-634}, type = {Article}, abstract = {

The introduction of an efficient and precious platinum (Pt) free counter electrode (CE) for dye-sensitized solar cells (DSSCs) is an important aspect to address. In this report, we have employed nanoporous reduced graphene oxide (PG) containing PEDOT:PSS-PG composite on FTO substrate as CEs, which have shown excellent diffusion of I-3(-), remarkable photocatalytic activity, and better device performance along with desired stability. The investigated cathode material has been prepared by mixing PGs and highly conducting PEDOT:PSS. Experimental measurements and analyses such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and so on indicate that PEDOT:PSS-PG is a promising cathode material for a Pt-free CE in DSSCs. EIS indicates that the PEDOT:PSS-PGs have lower interfacial charge-transfer resistance because of their high electrical conductivity and superior electrocatalytic activity. The achieved photoconversion efficiency (eta) of a DSSC employing the Pt-free PEDOT:PSS-PG/FTO CE is 9.57\%, which is found to be comparable to that of Pt/FTO CE based DSSC (9.64\%) under a simulated solar light illumination of 100 mW/cm(2).

}, keywords = {counter electrode, Dye-sensitized solar cells, electrocatalytic activity, PEDOT:PSS, Reduced graphene oxide}, issn = {2637-6113}, doi = {10.1021/acsaelm.9b00593}, author = {Sudhakar, Vediappan and Singh, Anup Kumar and Chini, Mrinmoy Kumar} } @article {46805, title = {Novel Ru nanoparticle catalysts for the catalytic transfer hydrogenation of biomass-derived furanic compounds}, journal = {Sustainable Energy \& Fuels}, volume = {4}, year = {2020}, month = {JUL }, pages = {3654-3667}, type = {Article}, abstract = {

The catalytic transfer hydrogenation (CTH) reaction was investigated for boosting the reduction of biomass-derived furanic compounds to obtain high-quality liquid biofuels. The CTH of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) and furfural to 2-methylfuran (MF) was thoroughly studied over the Ru, Pd, Au, Pt, Ni, Rh and Cu metal catalysts supported on nitrogen-doped mesoporous carbons (NMCs) by utilizing 2-propanol as a source of hydrogen. The structural characteristics of the materials were examined by employing various physico-chemical methods, such as XRD, N(2)sorption, CHN analysis, XPS, FT-IR spectroscopy, H-2-TPR, TEM, CO2-TPD, ICP-OES and Raman spectroscopy. The influence of the N content, basicity of the catalyst, reaction temperature, hydrogen donor, nature of the catalyst support and transition metal was systematically investigated with regard to the substrate conversions and product yields. The correlation between the N content (wt\%) of the catalysts and the Ru nanoparticle size (nm) and turnover frequency (h(-1)) was also investigated. Highly dispersed Ru nanoparticles (1.9 nm) supported on NMC displayed admirable catalytic performance in CTH for the conversion of HMF to DMF and furfural to MF. The catalyst Ru-NMC with a good N content (11.4 wt\%) gave 84 and 87 mol\% yields of DMF and MF, respectively, with 2-propanol as the source of hydrogen under mild reaction conditions. In addition, this catalyst demonstrated excellent recyclability. The better catalytic activity of the Ru-NMC catalyst in the CTH of HMF and furfural was credited to the small size of the Ru metal nanoparticles (1.9 nm), high N content, superior metal-support interaction and mesoporous framework of the catalyst.

}, issn = {2398-4902}, doi = {10.1039/d0se00361a}, author = {Nagpure, Atul S. and Gogoi, Pranjal and Lucas, Nishita and Chilukuri, V. Satyanarayana} } @article {46738, title = {One pot hydrogenation of furfural to 2-methyl tetrahydrofuran over supported mono- and Bi-metallic catalysts}, journal = {ChemistrySelect}, volume = {5}, year = {2020}, month = {AUG }, pages = {9590-9600}, type = {Article}, abstract = {

2-Methyltetrahydrofuran is a valuable commercial product that can be obtained by direct hydrogenation of furfural. In the present study, among several carbon supported bimetallic Ir-Ni catalysts with different loadings screened, 4\% Ir-4\% Ni/C catalyst showed excellent activity in terms of direct conversion (99\%) to 2-MeTHF with a maximum selectivity of similar to 74\% at 220 degrees C and 750 psig, suppressing the formation of side chain as well as ring opening products. The catalytic activity was found to be mainly affected by catalyst preparation methods, metal loadings, surface composition, temperature, pressure and catalyst loading. HR-TEM and STEM revealed well dispersed Ir-Ni NPs having the particle sizes in the range of 2 to 5 nm. Different phases of Ir i. e. Ir degrees and IrO(2)as well as oxygen vacancies were found to be responsible for hydrogenation of furfural to 2-methyl furan while, Ni degrees and NiO were responsible for further hydrogenation to 2-MeTHF. The synergic effect between Ir and Ni was established through XPS, H-2-TPR analysis. With the help of some control experiments, the plausible reaction pathway was also proposed. The catalyst prepared by co-impregnation method found more effective than prepared by sequential addition method. At lower Ni loadings of 1\% and 2\%, low temperature of 160 degrees C as well as at low H(2)pressure of 250 psig, mixture of furfuryl alcohol and 2-methyl furan were formed selectively. Catalyst could be successfully reused up to 3 times without leaching of metals.

}, keywords = {2-Methyltetrahydrofuran, Bimetallic catalyst, furfural, Hydrogenation, OER type mechanism}, issn = {2365-6549}, doi = {10.1002/slct.202002322}, author = {Date, Nandan S. and Hengne, Amol M. and Huang, K. -W. and Chikate, Rajeev C. and Rode, Chandrashekhar V.} } @article {47010, title = {Ovalbumin-mediated synthesis and simultaneous functionalization of graphene with increased protein stability}, journal = {Green Chemistry Letters and Reviews}, volume = {13}, year = {2020}, month = {JAN }, pages = {60-67}, type = {Article}, abstract = {

In this article, we have shown an easy, one-step, protein-directed approach for the synthesis of water-soluble and functional graphene using ovalbumin. The obtained ovalbumin functionalized graphene was characterized by UV-visible spectroscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared spectroscopy. Atomic force microscopy was used to check the attachment/functionalization of ovalbumin on grapheme sheets. It was shown that the functionalization of ovalbumin on grapheme sheets makes the protein more thermally stable compare to free ovalbumin, which has been shown by using sodium dodecyl sulfate polyacrylamide gel electrophoresis.

}, keywords = {Atomic force microscopy, graphene, graphene oxide, Ovalbumin, SDS-PAGE, thermal degradation}, issn = {1751-8253}, doi = {10.1080/17518253.2020.1725150}, author = {Ullah, Riaz and Khan, Shadab Ali and Aladresi, Aref Ali Mohammed and Alharbi, Sulaiman Ali and Chinnathambi, Arunachalam} } @article {47016, title = {P301 L, an FTDP-17 mutant, exhibits enhanced glycation in vitro}, journal = {Journal of Alzheimers Disease}, volume = {75}, year = {2020}, month = {JAN}, pages = {61-71}, type = {Article}, abstract = {

Background: Frontotemporal dementia and parkinsonism-linked to chromosome-17 are a group of diseases with tau mutations leading to primary tauopathies which include progressive supranuclear palsy, corticobas al syndrome, and frontotemporal lobar degeneration. Alzheimer{\textquoteright}s disease is a non-primary tauopathy, which displays tau neuropathology of excess tangle formation and accumulation. FTDP-17 mutations are responsible for early onset of AD, which can be attributed to compromised physiological functions due to the mutations. Tau is a microtubule-binding protein that secures the integrity of polymerized microtubules in neuronal cells. It malfunctions owing to various insults and stress conditions-like mutations and post-translational modifications. Objective: In this study, we modified the wild type and tau mutants by methyl glyoxal and thus studied whether glycation can enhance the aggregation of predisposed mutant tau. Methods: Tau glycation was studied by fluorescence assays, SDS-PAGE analysis, conformational evaluation, and transmission electron microscopy. Results: Our study suggests that FTDP-17 mutant P301 L leads to enhanced glycation-induced aggregation as well as advanced glycation end products formation. Glycation forms amorphous aggregates of tau and its mutants without altering its native conformation. Conclusion: The metabolic anomalies and genetic predisposition have found to accelerate tau-mediated neurodegeneration and prove detrimental for the early-onset of Alzheimer{\textquoteright}s disease.

}, keywords = {advanced glycation end products, Alzheimer{\textquoteright}s disease, FTDP-17, tau glycation}, issn = {1387-2877}, doi = {10.3233/JAD-191348}, author = {Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose} } @article {46838, title = {Palladium-catalyzed insertion of ethylene and 1,1-disubstituted difunctional olefins: an experimental and computational study}, journal = {ChemPlusChem}, volume = {85}, year = {2020}, month = {JUN}, pages = {1200-1209}, type = {Article}, abstract = {

Insertion or coordination copolymerization of ethylene with di-substituted olefins is challenging and the choice of di-substituted mono-functional olefin versus di-substituted di-functional olefin (DDO) appears to be decisive. Here we show that DDO-inserted species are amenable to ethylene insertion and polymerization. DDOs such as 2-acetamidoacrylic acid (AAA), methyl 2-acetamidoacrylate (MAAA), and ethyl 2-cyanoacrylate (ECA) were treated with palladium complex [{P perpendicular to O}PdMe(L)] (P perpendicular to O=kappa(2)-P,O-Ar2PC6H4SO2O with Ar=2-MeOC6H4; L=C2H6OS) and the existence of respective insertion intermediates in moderate yield (up to 37 \%) was established. These intermediates were exposed to ethylene and corresponding ethylene-inserted products were isolated and characterized. A careful comparison with three model compounds confirmed ethylene insertion and polymerization. Thus, the combined experimental and computational investigations show that DDO-inserted species can undergo ethylene insertion and polymerization.

}, keywords = {Homogeneous catalysis, insertion copolymerization, Olefins, Palladium, Polyethylene}, issn = {2192-6506}, doi = {10.1002/cplu.202000309}, author = {Gaikwad, Shahaji R. and Patel, Ketan and Deshmukh, Satej S. and Mote, Nilesh R. and Birajdar, Rajkumar S. and Pandole, Satish P. and Chugh, Jeetender and Chikkali, Samir H.} } @article {46996, title = {Pd-iminocarboxylate complexes and their behavior in ethylene polymerization}, journal = {Chemistry-An Asian Journal}, volume = {15}, year = {2020}, month = {FEB }, pages = {398-405}, type = {Article}, abstract = {

Designing co-catalyst-free late transition metal complexes for ethylene polymerization is a challenging task at the interface of organometallic and polymer chemistry. Herein, a set of new, co-catalyst-free, single-component catalytic systems for ethylene polymerization have been unraveled. Treatment of anthranilic acid with various aldehydes produced four iminocarboxylate ligands (L1-L4) in very good to excellent yield (75-92 \%). The existence of 2-((2-methoxybenzylidene)amino) benzoic acid (L1) has been unambiguously demonstrated using NMR spectroscopy, MS and single-crystal X-ray diffraction. A neutral Pd-iminocarboxylate complex [{N O}PdMe(L1)] (N O=kappa(2)-N,O-ArCHNC6H4CO2 with Ar=2-MeOC6H4) C1 was prepared by treating stoichiometric amount of L1.Na with palladium precursor. The identity of C1 was confirmed by 1-2D NMR spectroscopy and single-crystal X-ray diffraction studies. Along the same lines, palladium complexes C2-C4 were prepared from ligands L2-L4 respectively. In-situ high-pressure NMR investigations revealed that these Pd complexes are amenable to ethylene insertion and undergo facile beta-H elimination to produce propylene. These palladium complexes were then evaluated in ethylene polymerization reaction and various reaction parameters were screened. When C1-C4 were exposed to ethylene pressures of 10-50 bar, formation of low-molecular-weight polyethylene was observed.

}, keywords = {imine, Imine-carboxylate, Insertion polymerization, Pd complexes, Polyethylene}, issn = {1861-4728}, doi = {10.1002/asia.201901501, Early Access Date = JAN 2020}, author = {Deshmukh, Satej S. and Gaikwad, Shahaji R. and Gonnade, Rajesh G. and Pandole, Satish P. and Chikkali, Samir H.} } @article {46616, title = {Penicillium janthinellum NCIM1366 shows improved biomass hydrolysis and a larger number of CAZymes with higher induction levels over Trichoderma reesei RUT-C30}, journal = {Biotechnology for Biofuels}, volume = {13}, year = {2020}, month = {DEC }, pages = {196}, type = {Article}, abstract = {

Background Major cost of bioethanol is attributed to enzymes employed in biomass hydrolysis. Biomass hydrolyzing enzymes are predominantly produced from the hyper-cellulolytic mutant filamentous fungus Trichoderma reesei RUT-C30. Several decades of research have failed to provide an industrial grade organism other than T. reesei, capable of producing higher titers of an effective synergistic biomass hydrolyzing enzyme cocktail. Penicillium janthinellum NCIM1366 was reported as a cellulase hyper producer and a potential alternative to T. reesei, but a comparison of their hydrolytic performance was seldom attempted. Results Hydrolysis of acid or alkali-pretreated rice straw using cellulase enzyme preparations from P. janthinellum and T. reesei indicated 37 and 43\% higher glucose release, respectively, with P. janthinellum enzymes. A comparison of these fungi with respect to their secreted enzymes indicated that the crude enzyme preparation from P. janthinellum showed 28\% higher overall cellulase activity. It also had an exceptional tenfold higher beta-glucosidase activity compared to that of T. reesei, leading to a lower cellobiose accumulation and thus alleviating the feedback inhibition. P. janthinellum secreted more number of proteins to the extracellular medium whose total concentration was 1.8-fold higher than T. reesei. Secretome analyses of the two fungi revealed higher number of CAZymes and a higher relative abundance of cellulases upon cellulose induction in the fungus. Conclusions The results revealed the ability of P. janthinellum for efficient biomass degradation through hyper cellulase production, and it outperformed the established industrial cellulase producer T. reesei in the hydrolysis experiments. A higher level of induction, larger number of secreted CAZymes and a high relative proportion of BGL to cellulases indicate the possible reasons for its performance advantage in biomass hydrolysis.

}, keywords = {Bioethanol, CAZymes, Cellulase, Penicillium janthinellum, Secretome, Trichoderma reesei}, doi = {10.1186/s13068-020-01830-9}, author = {Sreeja-Raju, Athiraraj and Christopher, Meera and Kooloth-Valappil, Prajeesh and Kuni-Parambil, Rajasree and Gokhale, Digambar Vittal and Sankar, Meena and Abraham, Amith and Pandey, Ashok and Sukumaran, Rajeev K.} } @article {47005, title = {Phagocytosis of full-length Tau oligomers by Actin-remodeling of activated microglia}, journal = {Journal of Neuroinflammation}, volume = {17}, year = {2020}, month = {JAN }, pages = {10}, type = {Article}, abstract = {

Background Alzheimer{\textquoteright}s disease is associated with the accumulation of intracellular Tau tangles within neurons and extracellular amyloid-beta plaques in the brain parenchyma, which altogether results in synaptic loss and neurodegeneration. Extracellular concentrations of oligomers and aggregated proteins initiate microglial activation and convert their state of synaptic surveillance into a destructive inflammatory state. Although Tau oligomers have fleeting nature, they were shown to mediate neurotoxicity and microglial pro-inflammation. Due to the instability of oligomers, in vitro experiments become challenging, and hence, the stability of the full-length Tau oligomers is a major concern. Methods In this study, we have prepared and stabilized hTau40(WT) oligomers, which were purified by size-exclusion chromatography. The formation of the oligomers was confirmed by western blot, thioflavin-S, 8-anilinonaphthaalene-1-sulfonic acid fluorescence, and circular dichroism spectroscopy, which determine the intermolecular cross-beta sheet structure and hydrophobicity. The efficiency of N9 microglial cells to phagocytose hTau40(WT) oligomer and subsequent microglial activation was studied by immunofluorescence microscopy with apotome. The one-way ANOVA was performed for the statistical analysis of fluorometric assay and microscopic analysis. Results Full-length Tau oligomers were detected in heterogeneous globular structures ranging from 5 to 50 nm as observed by high-resolution transmission electron microscopy, which was further characterized by oligomer-specific A11 antibody. Immunocytochemistry studies for oligomer treatment were evidenced with A11(+) Iba1(high) microglia, suggesting that the phagocytosis of extracellular Tau oligomers leads to microglial activation. Also, the microglia were observed with remodeled filopodia-like actin structures upon the exposure of oligomers and aggregated Tau. Conclusion The peri-membrane polymerization of actin filament and co-localization of Iba1 relate to the microglial movements for phagocytosis. Here, these findings suggest that microglia modified actin cytoskeleton for phagocytosis and rapid clearance of Tau oligomers in Alzheimer{\textquoteright}s disease condition.

}, keywords = {Actin, activation, Alzheimer{\textquoteright}s disease, microglia, migration, neurodegeneration, Tau Oligomers, Tauopathy}, doi = {10.1186/s12974-019-1694-y}, author = {Das, Rashmi and Balmik, Abhishek Ankur and Chinnathambi, Subashchandrabose} } @article {46774, title = {Photodynamic exposure of Rose-Bengal inhibits Tau aggregation and modulates cytoskeletal network in neuronal cells}, journal = {Scientific Reports}, volume = {10}, year = {2020}, month = {JUL}, pages = {12380}, type = {Article}, abstract = {

The intracellular Tau aggregates are known to be associated with Alzheimer{\textquoteright}s disease. The inhibition of Tau aggregation is an important strategy for screening of therapeutic molecules in Alzheimer{\textquoteright}s disease. Several classes of dyes possess a unique property of photo-excitation, which is applied as a therapeutic measure against numerous neurological dysfunctions. Rose Bengal is a Xanthene dye, which has been widely used as a photosensitizer in photodynamic therapy. The aim of this work was to study the protective role of Rose Bengal against Tau aggregation and cytoskeleton modulations. The aggregation inhibition and disaggregation potency of Rose Bengal and photo-excited Rose Bengal were observed by in-vitro fluorescence, circular dichroism, and electron microscopy. Rose Bengal and photo-excited Rose Bengal induce minimal cytotoxicity in neuronal cells. In our studies, we observed that Rose Bengal and photo-excited Rose Bengal modulate the cytoskeleton network of actin and tubulin. The immunofluorescence studies showed the increased filopodia structures after photo-excited Rose Bengal treatment. Furthermore, Rose Bengal treatment increases the connections between the cells. Rose Bengal and photo-excited Rose Bengal treatment-induced actin-rich podosome-like structures associated with cell membranes. The in-vivo studies on UAS E-14 Tau mutant Drosophila suggested that exposure to Rose Bengal and photo-excited Rose Bengal efficiency rescues the behavioural and memory deficit in flies. Thus, the overall results suggest that Rose Bengal could have a therapeutic potency against Tau aggregation.

}, issn = {2045-2322}, doi = {10.1038/s41598-020-69403-2}, author = {Dubey, Tushar and Gorantla, Nalini Vijay and Chandrashekara, Kagepura Thammaiah and Chinnathambi, Subashchandrabose} } @article {46949, title = {Phytochemicals in cancer treatment: from preclinical studies to clinical practice (vol 10, 1614, 2020)}, journal = {Frontiers in Pharmacology}, volume = {11}, year = {2020}, month = {FEB }, pages = {175}, type = {Correction}, keywords = {Anticancer, clinical, medicinal plants, phytochemicals, preclinical}, issn = {1663-9812}, doi = {10.3389/fphar.2020.00175}, author = {Choudhari, Amit S. and Mandave, Pallavi C. and Deshpande, Manasi and Ranjekar, Prabhakar and Prakash, Om} } @article {46986, title = {Phytochemicals in cancer treatment: from preclinical studies to clinical practice}, journal = {Frontiers in Pharmacology}, volume = {10}, year = {2020}, month = {JAN}, pages = {1614}, type = {Review}, abstract = {

Cancer is a severe health problem that continues to be a leading cause of death worldwide. Increasing knowledge of the molecular mechanisms underlying cancer progression has led to the development of a vast number of anticancer drugs. However, the use of chemically synthesized drugs has not significantly improved the overall survival rate over the past few decades. As a result, new strategies and novel chemoprevention agents are needed to complement current cancer therapies to improve efficiency. Naturally occurring compounds from plants known as phytochemicals, serve as vital resources for novel drugs and are also sources for cancer therapy. Some typical examples include taxol analogs, vinca alkaloids such as vincristine, vinblastine, and podophyllotoxin analogs. These phytochemicals often act via regulating molecular pathways which are implicated in growth and progression of cancer. The specific mechanisms include increasing antioxidant status, carcinogen inactivation, inhibiting proliferation, induction of cell cycle arrest and apoptosis; and regulation of the immune system. The primary objective of this review is to describe what we know to date of the active compounds in the natural products, along with their pharmacologic action and molecular or specific targets. Recent trends and gaps in phytochemical based anticancer drug discovery are also explored. The authors wish to expand the phytochemical research area not only for their scientific soundness but also for their potential druggability. Hence, the emphasis is given to information about anticancer phytochemicals which are evaluated at preclinical and clinical level.

}, keywords = {Anticancer, clinical, medicinal plants, phytochemicals, preclinical}, issn = {1663-9812}, doi = {10.3389/fphar.2019.01614}, author = {Choudhari, Amit S. and Mandave, Pallavi C. and Deshpande, Manasi and Ranjekar, Prabhakar and Prakash, Om} } @inbook {47304, title = {Protein misfolding and aggregation of tau protein in alzheimer{\textquoteright}s disease}, booktitle = {Advances in Bioengineering}, year = {2020}, pages = {139-146}, publisher = {Springer}, organization = {Springer}, abstract = {

Protein misfolding has interestingly been referred to as the {\textquoteleft}dark side{\textquoteright} of the protein world. The cytotoxicity of misfolded and unfolded polypeptides is due to an overwhelmed quality control system, mainly comprising molecular chaperones to assist in folding, the unfolded protein response (UPR) in the endoplasmic reticulum and the heat shock response (HSR) in the cytosol, which are aimed at clearing misfolded proteins and their early aggregates. When misfolded/unfolded polypeptides exceed the quality control measures of the chaperone{\textendash}ubiquitin{\textendash}proteasome clearing system, they form toxic pre-fibrillar aggregates which interact with the cell membrane, disrupting redox potential due to aggregate organization into non-specific membrane pores. In most cases, increases in intracellular free Ca{\texttwosuperior}$^{+}$ and consequent disruption of the redox potential are among the earliest biochemical alterations in exposed cells. An improved understanding of the mechanisms of protein misfolding and intermediate structures that lead from monomers to oligomers ready to aggregate could provide crucial impetus to therapeutic interventions such as upregulating molecular chaperone machinery, use of antibodies and high throughput screening of promising candidate molecules.

}, doi = {10.1007/978-981-15-2063-1_8}, author = {Chandrashekar, Madhura and Chinnathambi, Subashchandrabose} } @article {46810, title = {Proteomic analysis detects deregulated reverse cholesterol transport in human subjects with ST-segment elevation myocardial infarction}, journal = {Journal of Proteomics}, volume = {222}, year = {2020}, month = {JUN}, pages = {103796}, type = {Article}, abstract = {

Reverse cholesterol transport (RCT) plays a critical role in removing cholesterol from the arterial wall. However, very few reports directly relate chronic inflammation and RCT with atherosclerosis. The present study was undertaken to investigate clinical implications of significantly altered circulating proteins in subjects with ST-segment elevation myocardial infarction (STEMI) in the manifestation of atherosclerotic events. Using a casecontrol design, more than 2500 proteins in both STEMI and healthy control subjects were identified by Orbitrap mass spectrometer. Quantitative proteomics study revealed downregulation of 26 proteins while expression of 38 proteins increased significantly in STEMI subjects compared to healthy controls. Pathway enrichment analyses indicated that most of the identified proteins were related to chronic inflammation, atherosclerosis, and RCT. Altered proteins such as AZGP1, ABCA5, Calicin, PGLYRP2, HAVCR2 and C17ORF57 were further validated by Western blotting analysis of human plasma. Pathophysiological significance was studied using macrophage derived foam cell for their critical role in RCT which indicated the imbalance of RCT via the interaction of AZGP1 with CD36. In summary, this study revealed a unique relationship of some novel proteins apparently responsible for impaired RCT and chronic inflammation leading to atherothrombosis and myocardial infarction. Significance: In the present study we identified \>= 2500 unique circulating proteins in healthy control and clinically diagnosed STEMI subjects among which 423 proteins were found to be common in both the groups. We further show 64 proteins significantly different between healthy control and STEMI subjects. Proteomic analyses reveal a panel of proteins associated with atherosclerosis and STEMI. One of the proteins, AZGP1, an adipokine, is likely to act as the missing link between chronic inflammation and cholesterol transport. Deregulation of reverse cholesterol transport might be orchestrated by AZGP1, CD36, ABCA5, and PPARy in STEMI subjects. The present study employs shotgun and quantitative proteomics followed by in vitro validations demonstrating a biochemical basis for reverse cholesterol transport in the local milieu of the luminal wall of the artery which are critical for plaque build-up and atherosclerosis.

}, keywords = {Atherosclerosis, AZGP1, CD36, Plasma proteomics, Reverse cholesterol transport, STEMI}, issn = {1874-3919}, doi = {10.1016/j.jprot.2020.103796}, author = {Das, Apabrita Ayan and Choudhury, Kamalika Roy and Jagadeeshaprasad, M. G. and Kulkarni, Mahesh J. and Mondal, Prakash Chandra and Bandyopadhyay, Arun} } @article {46762, title = {Proteomic analysis detects deregulated reverse cholesterol transport in human subjects with ST-segment elevation myocardial infarction (vol 222, 103796, 2020)}, journal = {Journal of Proteomics}, volume = {224}, year = {2020}, month = {JUL}, pages = {103828}, type = {Correction}, issn = {1874-3919}, doi = {10.1016/j.jprot.2020.103828}, author = {Das, Apabrita Ayan and Choudhury, Kamalika Roy and Jagadeeshaprasad, M. G. and Kulkarni, Mahesh J. and Mondal, Prakash Chandra and Bandyopadhyay, Arun} } @article {46651, title = {Protonation-induced dynamic allostery in PDZ domain: evidence of perturbation-independent universal response network}, journal = {Journal of Physical Chemistry Letters}, volume = {11}, year = {2020}, month = {NOV }, pages = {9026-9031}, type = {Article}, abstract = {

Dynamic allostery is a relatively new paradigm where certain external perturbations may lead to modulation of conformational dynamics at a distant part of a protein without significant changes in the overall structure. While most well-characterized examples of dynamic allostery involve binding with other entities like small molecules, peptides, or nucleic acids, in this work we demonstrate that chemical modifications like protonation may lead to significant dynamical allosteric response in a PDZ domain protein. Tuning the protonation states of two histidine residues (H317 and H372), we identify the allosteric pathways responsible for the dynamic response. Interestingly, the same set of residues that constitute the allosteric response network upon ligand binding seem to be responsible for protonation-induced dynamic allostery. Thus, we propose the existence of an inherent universal response network in signaling proteins, where the same set of residues can respond to varying types of external perturbations in terms of rearrangement of hydrogen-bonded network and redistribution of electrostatic interaction energies.

}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.0c02885}, author = {Kumawat, Amit and Chakrabarty, Suman} } @article {46797, title = {Renewing polyethylene: insertion copolymerization of sugar derived hydrophilic monomers with ethylene}, journal = {European Polymer Journal}, volume = {134}, year = {2020}, month = {JUL }, pages = {109775}, type = {Article}, abstract = {

Although highly desirable, insertion copolymerization of renewable resource derived functional olefins with ethylene has been rarely investigated. Herein, we report insertion copolymerization of challenging sugar derived isohexide mono-enes with ethylene in the presence of Pd-phosphinesulfonate acetonitrile catalyst (C1). Thus, copolymerization of ethylene with isomannide mono-ene (2a), isosorbide mono-ene (2b{\textquoteright}), isoidide mono-ene (2c) and methacryl-2,3,4,6-tetra-O-acetyl-D glucopyranoside (2d) afforded corresponding functionalized polyethylene (P2a-1 to P2d-1). High temperature proton NMR investigations revealed enchainment of 2a-2c in polyethylene backbone and the highest incorporation of 1.45\% was observed for 2c. The high temperature proton NMR results were further corroborated by solid state C-13 NMR and IR spectroscopy. Gel permeation chromatography analysis displayed weight average molecular weight in the range of 13.0-27.2 x 10(3) g/mol. The thus prepared copolymers revealed melting temperature in the range of 117-126 degrees C. Relatively reduced melting temperature compared to neat polyethylene may suggest an irregular arrangement of pendant functional group on polyethylene main chain.

}, keywords = {Hydrophilic polyethylene, insertion copolymerization, Isohexide mono-enes, Polyethylene, Sugar}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2020.109775}, author = {Rajput, Bhausaheb S. and Pawal, Sandip B. and Bodkhe, V. Dnyaneshwar and Rao, I. Nagamalleswara and Sainath, Annadanam V. Sesha and Chikkali, Samir H.} } @article {46773, title = {Residue-based propensity of aggregation in the Tau amyloidogenic hexapeptides AcPHF6*and AcPHF6}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JUL}, pages = {27331-27335}, type = {Article}, abstract = {

In Alzheimer{\textquoteright}s disease and related tauopathies, the aggregation of microtubule-associated protein, Tau, into fibrils occursviathe interaction of two hexapeptide motifs PHF*(275)VQIINK(280)and PHF(306)VQIVYK(311)as beta-sheets. To understand the role of the constituent amino acids of PHF and PHF* in the aggregation, a set of 12 alanine mutant peptides was synthesized by replacing each amino acid in PHF and PHF* with alanine and they were characterized by nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), transmission electron microscopy (TEM) and ThS/ANS fluorescence assay. Our studies show that while the aggregation was suppressed in most of the alanine mutant peptides, replacement of glutamine by alanine in both PHF and PHF* enhanced the fibrillization.

}, doi = {10.1039/d0ra03809a}, author = {Dangi, Abha and Balmik, Abhishek Ankur and Ghorpade, Archana Kisan and Gorantla, Nalini Vijay and Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose and Marelli, Udaya Kiran} } @article {46763, title = {Review of porous adsorbents for the separation of nitrogen from natural gas}, journal = {Industrial \& Engineering Chemistry Research}, volume = {59}, year = {2020}, month = {JUL}, pages = {13355-13369}, type = {Review}, abstract = {

Natural gas is one of the critical fossil fuel sources in the world to fulfill current energy demand in the global market. Methane is the primary component in natural gas and its concentration is dependent on the source; a variety of impurities, such as nitrogen, carbon dioxide, oxygen, helium, hydrogen sulfide, water, and heavier hydrocarbons can be present, which reduces the overall fuel quality. Purification of natural gas is important in order to meet the U.S. pipeline and minimum heating value specifications. The separation of nitrogen from methane is challenging because of their similar molecular size (i.e., the two gases differ in kinetic diameter by only 0.16 angstrom). This Review discusses different methods for separating nitrogen from methane. Of these methods, pressure swing adsorption is one of the most effective techniques for separating nitrogen from natural gas using porous adsorbents, and encouraging results have been demonstrated in the past few decades. Many types of porous adsorbents are discussed here, including carbon molecular sieves, activated carbons, zeolites, titanosilicates, and metal-organic frameworks. Future trends and materials are discussed to put into perspective the new opportunities in this research area.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.0c02730}, author = {Nandanwar, Sachin U. and Corbin, David R. and Shiflett, Mark B.} } @article {47020, title = {Rheological quantification of the extent of dissolution of ultrahigh molecular weight polyethylene in melt-compounded blends with high density polyethylene}, journal = {Journal of Rheology}, volume = {64}, year = {2020}, month = {JAN}, pages = {1-12}, type = {Article}, abstract = {

Melt compounding of ultrahigh molecular weight polyethylene (UHMWPE) with high density polyethylene (HDPE) promises to be an alternative route to prepare bimodal polyethylene grades. However, complete dissolution of UHMWPE in HDPE cannot be guaranteed during melt compounding. Indeed, in an earlier work [K. Chaudhuri et al., Polym. Eng. Sci. 59, 821-829 (2019)], it was shown that a fully entangled UHMWPE did not mix well with commercial HDPE. However, a disentangled UHMWPE (dPE) could be melt-mixed in the same HDPE as evidenced qualitatively by rheological measurements. The present work is focused on quantifying the extent of dissolution of dPE in HDPE. The proposed method involves fitting rheological models for linear viscoelasticity of entangled bimodal blends of polydisperse polymers to dynamic oscillatory shear data and extracting information on the extent of dissolved species. The time-dependent diffusion model of des Cloizeaux is used along with the theory of double reptation (DR) to describe the dynamics of polydisperse homopolymers and also to extract the molecular weight distribution of the UHMWPE sample. A quadratic mixing rule, consistent with the DR model, is used to describe the dynamics of bimodal blends. Melt-mixed dPE/HDPE blends were prepared and characterized for their linear viscoelastic response by frequency sweep tests. The blends showed complex behavior with multiple crossover points, especially for the higher content of dPE. The bimodal model was then fit to the experimental frequency sweep data to determine the only unknown parameter, namely, the extent of dissolved dPE. It was found that a considerable fraction of dPE is dissolved in HDPE during melt compounding.

}, keywords = {blends, Disentangled UHMWPE, double reptation, HDPE, Mathematical modeling}, issn = {0148-6055}, doi = {10.1122/1.5113705}, author = {Chaudhuri, Krishnaroop and Lele, Ashish K.} } @article {46943, title = {Role of cholesterol-mediated effects in GPCR heterodimers}, journal = {Chemistry and Physics of Lipids}, volume = {227}, year = {2020}, month = {MAR}, pages = {104852}, type = {Article}, abstract = {

G protein-coupled receptors (GPCRs) are transmembrane receptors that mediate a large number of cellular responses. The organization of GPCRs into dimers and higher-order oligomers is known to allow a larger repertoire of downstream signaling events. In this context, a crosstalk between the adenosine and dopamine receptors has been reported, indicating the presence of heterodimers that are functionally relevant. In this paper, we explored the effect of membrane cholesterol on the adenosine(2A) (A(2A)) and dopamine D-3 (D-3) receptors using coarse-grain molecular dynamics simulations. We analyzed cholesterol interaction sites on the A(2A) receptor and were able to reproduce the sites indicated by crystallography and previous atomistic simulations. We predict novel cholesterol interaction sites on the D-3 receptor that could be important in the reported cholesterol sensitivity in receptor function. Further, we analyzed the formation of heterodimers between the two receptors. Our results suggest that membrane cholesterol modulates the relative population of several co-existing heterodimer conformations. Both direct receptor-cholesterol interaction and indirect membrane effects contribute toward the modulation of heterodimer conformations. These results constitute one of the first examples of modulation of GPCR hetero-dimerization by membrane cholesterol, and could prove to be useful in designing better therapeutic strategies.

}, keywords = {Adenosine(2A) receptor, Cholesterol, Dopamine D-3 receptor, G protein-coupled receptors, Heterodimer, MARTINI coarse-grain simulation}, issn = {0009-3084}, doi = {10.1016/j.chemphyslip.2019.104852}, author = {Prasanna, Xavier and Mohole, Madhura and Chattopadhyay, Amitabha and Sengupta, Durba} } @article {46916, title = {Role of dietary fatty acids in microglial polarization in Alzheimer{\textquoteright}s disease}, volume = {17}, year = {2020}, month = {MAR}, pages = {93}, type = {Review}, abstract = {

Microglial polarization is an utmost important phenomenon in Alzheimer{\textquoteright}s disease that influences the brain environment. Polarization depends upon the types of responses that cells undergo, and it is characterized by receptors present on the cell surface and the secreted cytokines to the most. The expression of receptors on the surface is majorly influenced by internal and external factors such as dietary lipids. Types of fatty acids consumed through diet influence the brain environment and glial cell phenotype and types of receptors on microglia. Reports suggest that dietary habits influence microglial polarization and the switching of microglial phenotype is very important in neurodegenerative diseases. Omega-3 fatty acids have more influence on the brain, and they are found to regulate the inflammatory stage of microglia by fine-tuning the number of receptors expressed on microglia cells. In Alzheimer{\textquoteright}s disease, one of the pathological proteins involved is Tau protein, and microtubule-associated protein upon abnormal phosphorylation detaches from the microtubule and forms insoluble aggregates. Aggregated proteins have a tendency to propagate within the neurons and also become one of the causes of neuroinflammation. We hypothesize that tuning microglia towards anti-inflammatory phenotype would reduce the propagation of Tau in Alzheimer{\textquoteright}s disease.

}, keywords = {Fatty acids, Microglial polarization, Omega-3 fatty acids, Tau inflammation, Tau phagocytosis, Tau spreading, Tauopathy}, doi = {10.1186/s12974-020-01742-3}, author = {Desale, Smita Eknath and Chinnathambi, Subashchandrabose} } @article {46847, title = {Role of microglia in regulating cholesterol and tau pathology in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, year = {2020}, month = {MAY}, type = {Review; Early Access 2020}, abstract = {

Cholesterol, a principal constituent of the cell membrane, plays a crucial role in the brain by regulating the synaptic transmission, neuronal signaling, as well as neurodegenerative diseases. Defects in the cholesterol trafficking are associated with enhanced generation of hyperphosphorylated Tau and Amyloid-beta protein. Tau, a major microtubule-associated protein in the brain, is the key regulator of the mature neuron. Abnormally hyperphosphorylated Tau hampers the major functions related to microtubule assembly by promoting neurofibrillary tangles of paired helical filaments, twisted ribbons, and straight filaments. The observed pathological changes due to impaired cholesterol and Tau protein accumulation cause Alzheimer{\textquoteright}s disease. Thus, in order to regulate the pathogenesis of Alzheimer{\textquoteright}s disease, regulation of cholesterol metabolism, as well as Tau phosphorylation, is essential. The current review provides an overview of (1) cholesterol synthesis in the brain, neurons, astrocytes, and microglia; (2) the mechanism involved in modulating cholesterol concentration between the astrocytes and brain; (3) major mechanisms involved in the hyperphosphorylation of Tau and amyloid-beta protein; and (4) microglial involvement in its regulation. Thus, the answering key questions will provide an in-depth information on microglia involvement in managing the pathogenesis of cholesterol-modulated hyperphosphorylated Tau protein.

}, keywords = {Alzheimer{\textquoteright}s disease, Amyloid-beta protein, Cholesterol, microglia, Tau hyperphosphorylation}, issn = {0272-4340}, doi = {10.1007/s10571-020-00883-6}, author = {Nanjundaiah, Shwetha and Chidambaram, Hariharakrishnan and Chandrashekar, Madhura and Chinnathambi, Subashchandrabose} } @article {46634, title = {Scalable synthesis of 3-Ethyl-4-methyl-1,5-dihydro-2H-pyrrol-2-one: an important building block of the antidiabetic drug glimepiride}, journal = {Synthesis-Stuttgart}, volume = {52}, year = {2020}, month = {NOV}, pages = {3480-3484}, type = {Article}, abstract = {

A four-step, practical, and easily scalable synthesis of 3-ethyl-4-methyl-1,5-dihydro-2H-pyrrol-2-one, an important building block of the antidiabetic drug glimepiride, has been accomplished. Key features are the synthesis of 3-methyl-4-hydroxy-2-butenolide in water and triflic acid mediated N-benzyl lactam N-deprotection. The main advantages of this process are the scalable synthetic route and decreased number of reaction steps, which paves the way for the industrial-scale synthesis of 3-ethyl-4-methyl-1,5-dihydro-2H-pyrrol-2-one.

}, keywords = {antidiabetic drug, Butenolide, glimepiride, lactams, scalable synthesis}, issn = {0039-7881}, doi = {10.1055/s-0040-1707344}, author = {Chavan, Subhash P. and Pawar, Ambaji A. and Patil, Niteen B. and Kadam, Appasaheb L. and Shinde, Shrikrishna S.} } @article {46833, title = {Self-assembled helical arrays for the stabilization of the triplet state}, journal = {Angewandte Chemie-International Edition}, volume = {59}, year = {2020}, month = {JUL}, pages = {13079-13085}, type = {Article}, abstract = {

Room-temperature phosphorescence of metal and heavy atom-free organic molecules has emerged as an area of great potential in recent years. A rational design played a critical role in controlling the molecular ordering to impart efficient intersystem crossing and stabilize the triplet state to achieve room-temperature ultralong phosphorescence. However, in most cases, the strategies to strengthen phosphorescence efficiency have resulted in a reduced lifetime, and the available nearly degenerate singlet-triplet energy levels impart a natural competition between delayed fluorescence and phosphorescence, with the former one having the advantage. Herein, an organic helical assembly supports the exhibition of an ultralong phosphorescence lifetime. In contrary to other molecules, 3,6-phenylmethanone functionalized 9-hexylcarbazole exhibits a remarkable improvement in phosphorescence lifetime (\>4.1 s) and quantum yield (11 \%) owing to an efficient molecular packing in the crystal state. A right-handed helical molecular array act as a trap and exhibits triplet exciton migration to support the exceptionally longer phosphorescence lifetime.

}, keywords = {carbazole, helicity, phenylmethanone, ultralong phosphorescence, waveguiding}, issn = {1433-7851}, doi = {10.1002/anie.202005105, Early Access Date = JUN 2020}, author = {Nidhankar, Aakash D. and Goudappagouda and Kumari, Divya S. Mohana and Chaubey, Shailendra Kumar and Nayak, Rashmi and Gonnade, Rajesh G. and Kumar, G. V. Pavan and Krishnan, Retheesh and Babu, Sukumaran Santhosh} } @article {46823, title = {"Shape-coding{\textquoteright}{\textquoteright}: morphology-based information system for polymers and composites}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, month = {JUN}, pages = {27555-27561}, type = {Article}, abstract = {

Fiber-reinforced composites have become the material of choice for aerospace structures because of their favorable strength-to-weight ratio. Given the increasing amounts of counterfeit composite parts showing up in the complex aerospace supply chain, it is absolutely vital to track a composite part throughout its lifecycle-from production to usage and to disposal. Existing barcoding methods are invasive, affect the structural properties of composites, and/or are vulnerable to tampering. We describe a universal method to store information in fiber-reinforced composites based on solid-state in situ reduction leading to embedded nanoparticles with controlled morphologies. This simple, cost-effective, mild, surfactant-free, and one-step protocol for the fabrication of embedded platinum nanostructures leads to morphology-based barcodes for polymeric composites. We also describe a coding methodology wherein a 1 x 1 cm code can represent 3.4 billion parts to 95 trillion parts, depending on the resolution required along with access to morphology-based chemical encryption systems.

}, keywords = {barcoding chemical encryption, epoxy composites, nanoparticle morphology control, solid-state synthesis}, issn = {1944-8244}, doi = {10.1021/acsami.0c05314}, author = {Pansare, V, Amol and Chhatre, Shraddha Y. and Khairkar, Shyam R. and Bell, Jeffrey G. and Barbezat, Michel and Chakrabarti, Subhananda and Nagarkar, Amit A.} } @article {46882, title = {Shotgun metagenome guided exploration of anthropogenically driven resistomic hotspots within Lonar soda lake of India}, journal = {Ecotoxicology and Environmental Safety}, volume = {194}, year = {2020}, month = {MAY}, pages = {110443}, type = {Article}, abstract = {

Anthropogenic activities mediated antibiotic resistance genes (ARGs) in the pristine aquatic bodies (lakes) is raising concern worldwide. Long read shotgun sequencing was used to assess taxonomic diversity, distribution of ARGs and metal resistance genes (MRGs) and mobile genetic elements (MGEs) in six sites within hypersaline Lonar soda lake (India) prone to various anthropogenic activities. Proteobacteria and Euryarchaeota were dominant phyla under domain Bacteria and Archaea respectively. Higher abundance of Bacteroidetes was pragmatic at sites 18LN5 and 18LN6. Functional analysis indicated 26 broad-spectrum ARGs types, not reported earlier in this ecosystem. Abundant ARG types identified were multidrug efflux, glycopepetide, bacitracin, tetracycline and aminogylcoside resistance. Sites 18LN1 and 18LN5 depicted 167 and 160 different ARGs subtypes respectively and rpoB2, bcrA, tetA(48), mupA, ompR, patA, vanR and multidrug ABC transporter genes were present in all samples. The rpoB2 gene was dominant in 18LN1, whereas bcrA gene in 18LN2-18LN6 sites. Around 24 MRGs types were detected with higher abundance of arsenic in 18LN1 and copper in 18LN2-18LN6, signifying metal contamination linked to MRGs. The bacterial taxa Pseudomonas, Thioalkalivibrio, Burkholderia, Clostridium, Paenibacillus, Bacillus and Streptomyces were significantly associated with ARGs. This study highlights the resistomic hotspots in the lake for deploying policies for conservation efforts.

}, keywords = {ARGs, diversity, Lonar lake, MGEs, MRGs, Nanopore sequencing}, issn = {0147-6513}, doi = {10.1016/j.ecoenv.2020.110443}, author = {Chakraborty, Jaya and Sapkale, Vibhavari and Rajput, Vinay and Shah, Manan and Kamble, Sanjay and Dharne, Mahesh} } @article {47784, title = {Simultaneous determination of anthraquinone, flavonoids, and phenolic antidiabetic compounds from cassia auriculata seeds by validated UHPLC based MS/MS method}, journal = {Mass Spectrometry Letters}, volume = {11}, year = {2020}, month = {DEC}, pages = {82-89}, type = {Article}, abstract = {A systematic isolation and characterization study for Cassia auriculata (CA) seeds resulted in identifying antidiabetic compounds 1,3,8-trihydroxyanthraquinone and quercetin, quercetin-3-O-rutinoside, gallic acid, caffeic acid, ferulic acid, and ellagic acid. The ultra-high-performance liquid chromatography based triple quadrupole mass spectrometry methodology was developed and validated for simultaneous identification and confirmation of these compounds from CA seeds. Multiple reaction monitoring (MRM) based quantification method was developed with MRM optimizer software for MS1 and MS2 mass analysis. The method was optimized on precursor ions and product ions with the ion ratio of each compound. The calibration curves of seven bioactive analytes showed excellent linearity (r2 >= 0.99). The quantitation results found precise (RSD, < 10 \%) with good recoveries (84.58 to 101.42\%). The matrix effect and extraction recoveries were found within the range (91.66 to 102.11\%) for the CA seeds. This is the first MS/MS-based methodology applied to quantifying seven antidiabetic compounds in CA seeds and its extract for quality control purposes.}, doi = {10.5478/MSL.2020.11.4.82}, author = {Girme, Aboli and Saste, Ganesh and Chinchansure, Ashish and Joshi, Swati and Kunkulol, Rahul and Hingorani, Lal and Patwardhan, Bhushan} } @article {47137, title = {Simultaneous identification and estimation of glycyrrhizin, glabridin, and 18β-glycyrrhetinic acid in de-glycyrrhized Ayurvedic lipid-based formulation of Glycyrrhiza glabra using dual wavelength reverse phase-high-performance liquid chromatography }, journal = {Separation Science Plus}, volume = {3}, year = {2020}, month = {AUG}, pages = {460-471}, abstract = {

Plant-based Ayurvedic formulations such as medicated oils, confectioneries, etc. are developed with a rationale of selecting specific compounds for targeted action and minimal side effects. It is imperative to develop an analytical method to simultaneously identify and quantify the targeted compounds for good resolution with low retention time. The present assay using reverse phase-high-performance liquid chromatography is optimized to resolve glycyrrhizin, glabridin, and 18β-glycyrrhetinic acid simultaneously at retention times of 6.6, 8.1, and 10.2\ min, respectively, using acidified mobile phase from Glycyrrhiza glabra utilized in Ayurvedic lipid (cow{\textquoteright}s ghee and sesame oil) based formulations. Raw material, its decoction, and residues formed during preparation steps were extracted in methanol while lipid formulations were extracted using a binary solvent system of methanol and n-hexane. The separation was performed on Hypersil gold column maintained at 40{\textdegree}C using 0.2\% ortho-phosphoric acid with pH 3.5 in water and acetonitrile as binary gradient mobile phase. The compounds were detected at wavelengths 230 (glabridin) and 254 (glycyrrhizin and 18β-glycyrrhetinic acid) nm. The method revealed de-glycyrrhized finished products containing glabridin and 18β-glycyrrhetinic acid having medicinal value.

}, doi = {10.1002/sscp.202000015}, author = {Kumbhalkar, Bhagyashri and Walunj, Tanhaji and Chavan, Sandeep and Gupta, Vidya and Deshmukh, Vineeta and Sardeshmukh, Sadanand} } @article {46701, title = {Site speci fic nitrogen incorporation in reduced graphene oxide using imidazole as a novel reducing agent for ef ficient oxygen reduction reaction and improved supercapacitive performance}, journal = {Carbon}, volume = {166}, year = {2020}, month = {SEP }, pages = {361-373}, type = {Article}, issn = {0008-6223}, doi = {10.1016/j.carbon.2020.05.011}, author = {Roy, Dipayan and Sarkar, Saikat and Bhattacharjee, Kaustav and Panigrahi, Karamjyoti and Das, Bikram Kumar and Sardar, Kausik and Sarkar, Sourav and Chattopadhyay, Kalyan Kumar} } @article {46675, title = {Stimuli-responsive biodegradable polyurethane nano-constructs as a potential triggered drug delivery vehicle for cancer therapy}, journal = {International Journal of Pharmaceutics}, volume = {588}, year = {2020}, month = {OCT }, pages = {119781}, type = {Review}, abstract = {

Polyurethanes (PUs) constitute an essential class of stimuli-responsive and biodegradable material, which has significantly contributed to the advancement of polymers utilization in the biomedical field. The bio-erodible PUs construct an active corridor for facilitating drug into tumor cells, which has significantly impacted the progression of nano-micellar delivery systems. The self-assembled colloidal PUs pose distinctive features such as enhancing the solubility of hydrophobic chemotherapeutics, rapid cellular uptake, triggered erosion and drug release, bio-stimulus sensitivity, improvement in the targeting and proficiency of bioactive. Cationic PUs can easily be condensed with genetic material to form polyplexes and have shown excellent transfection efficiency for potential gene therapy against various cancers. Their modifiable chemistry offers a tool to impart the desired multifunctionality such as biocompatibility, sensitivity to pH, redox, temperature, enzyme, etc. and ligand conjugation for active targeting. These diverse exceptional properties make them excellent nano-carrier for a variety of bioactive, including chemotherapeutic drugs, DNA, RNA, and diagnostic moieties to the target tissue or cells. The PUs based nano-devices have certainly uncovered the path to achieve ideal systems for controlled personalized therapy. The literature discussed in this review shed light on the research innovations carried out in the last ten years for the development of multifunctional PUs for triggered delivery of bioactive to treat various cancers.

}, keywords = {Cancer nanomedicine, GSH, micelles, Polyurathanes, redox, Stimuli-responsive}, issn = {0378-5173}, doi = {10.1016/j.ijpharm.2020.119781}, author = {Gajbhiye, Kavita R. and Chaudhari, Bhushan P. and Pokharkar, Varsha B. and Pawar, Atmaram and Gajbhiye, Virendra} } @article {46695, title = {Stronger transcription regulatory circuit of HIV-1C drives the rapid establishment of latency with implications for the direct involvement of tat}, journal = {Journal of Virology}, volume = {94}, year = {2020}, month = {OCT}, pages = {e00503-20}, type = {Article}, abstract = {

The magnitude of transcription factor binding site variation emerging in HIV-1 subtype C (HIV-1C), especially the addition of NF-kappa B motifs by sequence duplication, makes the examination of transcriptional silence challenging. How can HIV-1 establish and maintain latency despite having a strong long terminal repeat (LTR)? We constructed panels of subgenomic reporter viral vectors with varying copy numbers of NF-kappa B motifs (0 to 4 copies) and examined the profile of latency establishment in Jurkat cells. Surprisingly, we found that the stronger the viral promoter, the faster the latency establishment. Importantly, at the time of commitment to latency and subsequent points, Tat levels in the cell were not limiting. Using highly sensitive strategies, we demonstrate the presence of Tat in the latent cell, recruited to the latent LTR. Our data allude, for the first time, to Tat establishing a negative feedback loop during the late phases of viral infection, leading to the rapid silencing of the viral promoter. IMPORTANCE Over the past 10 to 15 years, HIV-1 subtype C (HIV-1C) has been evolving rapidly toward gaining stronger transcriptional activity by sequence duplication of major transcription factor binding sites. The duplication of NF-kappa B motifs is unique and exclusive to HIV-1C, a property not shared with any of the other eight HIV-1 genetic families. What mechanism(s) does HIV-1C employ to establish and maintain transcriptional silence despite the presence of a strong promoter and concomitant strong, positive transcriptional feedback is the primary question that we attempted to address in the present manuscript. The role that Tat plays in latency reversal is well established. Our work with the most common HIV-1 subtype, HIV-1C, offers crucial leads toward Tat possessing a dual role in serving as both a transcriptional activator and repressor at different phases of viral infection of the cell. The leads that we offer through the present work have significant implications for HIV-1 cure research.

}, keywords = {HIV-1C, latency, LTR, NF-kappa B, positive feedback, Tat}, issn = {0022-538X}, doi = {10.1128/JVI.00503-20}, author = {Chakraborty, Sutanuka and Kabi, Manisha and Ranga, Udaykumar} } @article {46879, title = {Structural, molecular, functional and immunological characterization of Wuchereria bancrofti-galectin}, journal = {International Journal of Biological Macromolecules}, volume = {150}, year = {2020}, month = {MAY }, pages = {206-217}, type = {Article}, abstract = {

Galectins regulate growth and differentiation of immune cells and inflammation through their carbohydrate-binding function in humans, while also play a role in parasite survival. This study focused on the galectin of lymphatic filarial parasite Wuchereria bancrofti (Wb-Gal). The multiple sequence alignment with other galectins showed that the Wb-Gal belonged to galactoside binding lectin family, particularly tandem repeat type galectin-9. A homology model of Wb-Gal was developed in the I-TASser server using high similarity 3D structures with a quality score of 89.5. Molecular docking and dynamics studies revealed that the CCRD and NCRD of Wb-Gal bind with galactose and lactose. Further, Wb-Gal was cloned into the pET28 vector, expressed in E. coli Rosetta strain and purified by affinity chromatography. In the hemagglutination assays, the rWb-Gal bound to lactose, galactose, and glucose. Indirect Enzyme-Linked Immunosorbent Assay (ELISA) using different clinical filarial sera showed that the IgG and IgM response was against Wb-Gal x very high in all filarial clinical groups, whereas the IgA and IgG2 response was minimum to negligible. There was an enhanced response of IgG1 and IgG4 antibodies in Microfilaremics (MF) cases compared to Chronic Pathology (CP) and Endemic Normal (EN) individuals. Interestingly, the IgE response was comparatively higher in EN than MF and CP. These studies show that Wb-Gal is a member of the lectin family of proteins binding to different carbohydrates and may have an important role in the pathophysiology of filarial infection which needs to be investigated in greater detail. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Filariasis, Hemagglutination assay, Immunomodulation, Wuchereria bancrofti galectin}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.02.024}, author = {Yasin, Nazeer and Laxmanappa, Hoti Sugerappa and Muddapur, Uday M. and Cheruvathur, Jennifer and Prakash, S. M. Udaya and Thulasiram, Hirekodathakallu Venkataramaiah} } @article {46938, title = {Study of interfacial adhesion between nickel-titanium shape memory alloy and a polymer matrix by laser surface pattern}, journal = {Applied Sciences-Basel}, volume = {10}, year = {2020}, month = {MAR}, pages = {2172}, type = {Article}, abstract = {

The aim of this article is to investigate the interfacial adhesion of Ni-Ti shape memory alloy with a polymer matrix of Poly (methyl methacrylate) (PMMA). The surface pattern on Ni-Ti plates was channeled by a solid state laser machine. The laser machine allows for creating channels on the Ni-Ti surface for infiltration of the PMMA matrix, which could be attached as an intra-surface locking pattern to the Ni-Ti surface. The influence of the PMMA matrix on the surface of the NiTi plate was evaluated by thermomechanical analysis (TMA) and dynamic mechanical analysis (DMA). The surface characterization was carried out by an optical microscope on the PMMA/NiTi composite after mechanical testing. During mechanical testing, the polymer displays the multiple cracks in the longitudinal direction that result in slipping and fracture. TMA and DMA analyses were performed on the Ni-Ti- and PMMA-coated Ni-Ti ribbon to observe elasticity and the storage modulus for both samples. Better adhesion than 80 \% was observed in the Ni-Ti surface, in the laser surface pattern, in comparison to the free plain surface. However, the polymer acts as mechanical backing that caused a reduction in the shape-memory properties of the composite material.

}, keywords = {adhesion, mechanical properties, NiTi composites, NiTi plate, PMMA, Polymer, surface features}, doi = {10.3390/app10062172}, author = {Samal, Sneha and Tyc, Ondrej and Heller, Ludek and Sittner, Petr and Malik, Monika and Poddar, Pankaj and Catauro, Michelina and Blanco, Ignazio} } @article {46735, title = {Synthesis and antimycobacterial screening of new 4-(4-(1-benzyl-1H-1,2,3-triazol-4-yl)-1-phenyl-1H-pyrazol-3-yl)quinoline derivatives}, journal = {Journal of Heterocyclic Chemistry}, volume = {57}, year = {2020}, month = {NOV}, pages = {3918-3929}, type = {Article}, abstract = {

A new series of 4-(4-(1-benzyl-1H-1,2,3-triazol-4-yl)-1-phenyl-1H-pyrazol-3-yl)quinoline (6a-t) have been synthesized by a click reaction of 4-(4-ethynyl-1-phenyl-1H-pyrazol-3-yl)quinoline (4a-d) with a substituted benzyl azide (5a-e). The starting alkyne derivatives4a-dare obtained from Bestmann-Ohira reaction of 1-phenyl-3-(quinolin-4-yl)-1H-pyrazole-4-carbaldehyde and dimethyl(1-diazo-2-oxopropyl)phosphonate. The newly synthesized compounds are screened againstM. tuberculosisH37Ra dormant and active,Escherichia coli,Pseudomonas fluorescence,Staphylococcus aureusandBacillus subtilisstrains at 30 mu g/mL concentration. Most of the screened compounds showed good to moderate antibacterial activity againstS. aureus,B. subtilis, andMycobacterium tuberculosisH37Ra strains. The synthesized derivatives of quinolinyl-pyrazole-4-carbaldehyde and quinolinyl-pyrazole-4-ethyne reportd good to moderate activity against both strains ofM. tuberculosisH37Ra. Ten derivatives of quinolinyl-pyrazole presented good activity againstB. subtilis. These results suggested that further optimization and development of quinolinyl-pyrazolyl-1,2,3-triazole moeity could serve as lead compounds for antimycobacterial activity.

}, issn = {0022-152X}, doi = {10.1002/jhet.4101, Early Access Date = AUG 2020}, author = {Thakare, Prashant P. and Walunj, Yogesh and Chavan, Abhijit and Bobade, Vivek D. and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {46864, title = {Synthesis and biological activity of imidazole based 1,4-naphthoquinones}, journal = {New Journal of Chemistry}, volume = {44}, year = {2020}, month = {MAY }, pages = {6889-6901}, type = {Article}, abstract = {

Design and development of drugs in multi-drug resistant (MDR) infections have been of growing interest. We report the syntheses, and antibacterial and antifungal activities of imidazole-based 1,4-naphthoquinones (I-1 to I-4; 1-alkyl-2-methyl-1H-naphtho[2,3-d]imidazole-4,9-dione (alkyl = methyl to butyl)) and their precursors (B-3; N-(3-chloro-1,-dioxo-1,4-dihydronaphthalen-2-yl)acetamide) and A-1 to A-4; N-(3-(alkylamino)-1,4-dioxo-1,4-dihydronaphthalen-2-yl)acetamide (alkyl = methyl to butyl). Crystal structures of B-3, A-1 to A-3 and I-2 to I-4 were obtained through single crystal X-ray diffraction experiments. Electronic structure and charge distribution have further been characterized with the use of Density Functional Theory. Seven of these derivatives display a broad spectrum of antibacterial activity against few selected bacterial strains (Gram-positive and Gram-negative). As demonstrated MIC values with B-2 and B-3 against bacterial isolates were 8-64 mu g ml(-1) and those against pathogenic yeast, C. albicans, were observed in the range of 128-256 mu g ml(-1). MIC data of these derivatives suggest them to be promising against pathogens.

}, issn = {1144-0546}, doi = {10.1039/c9nj04339j}, author = {Choudhari, Dinkar and Salunke-Gawali, Sunita and Chakravarty, Debamitra and Shaikh, Samir R. and Lande, Dipali N. and Gejji, Shridhar P. and Rao, Pradeep Kumar and Satpute, Surekha and Puranik, Vedavati G. and Gonnade, Rajesh} } @article {46647, title = {Synthesis, characterization and catalytic study of mesoporous carbon materials prepared via mesoporous silica using non-surfactant templating agents}, journal = {Journal of Porous Materials}, year = {2020}, month = {NOV}, type = {Article; Early Access}, abstract = {

Mesostructured silica materials with surface area in the range of similar to 700-900 m(2)/g have been prepared using hydroxy-carboxylic acid compounds such as tartaric acid, malic acid and citric acid (low cost non-surfactant template/pore forming agents) and tetraethylorthosilicate (TEOS) as silica source by sol-gel reaction. The templates were removed by either soxhlet extraction or calcination method. Mesoporous carbon molecular sieves were then prepared by carbonizing sucrose inside the pores of the above prepared mesoporous silica using sulfuric acid as a catalyst. The materials were characterized by FTIR spectroscopy, powder X-ray diffraction (XRD), N-2-sorption studies, microanalysis, thermal analysis and transmission electron microscopy (TEM). The resulting carbon material shows relatively higher surface area (similar to 1100 m(2)/g), narrow pore size distribution and pore diameter of 4-5 nm. The mesoporosity of carbon material arises from interconnecting channels arrangements of mesoporous silica template. The mesoporous carbon material was used as a support for the immobilization of rhodium complex [HRhCO(TPPTS)(3)] by ossification method. The prepared catalyst has been tested for the hydroformylation of higher olefins. The activity of the catalyst was improved by 20-30\% as compared to the catalyst prepared from a conventional activated carbon support.

}, keywords = {Carbonization, Hydroformylation, Immobilization, Low cost templates, mesoporous carbon, Mesoporous silica}, issn = {1380-2224}, doi = {10.1007/s10934-020-01003-x}, author = {Pagar, Nitin S. and Karandikar, Prashant R. and Chandwadkar, Asha J. and Deshpande, Raj M.} } @article {47312, title = {Synthesis, crystal structure and Hirshfeld surface analysis of the hydrated form of N{\textquoteright}, N-(1,4-phenylenebis(methanylylidene) di(iso-nicotinic hydrazide)}, journal = {Chemical Data Collections}, volume = {28}, year = {2020}, month = {AUG}, type = {Article}, abstract = {

The title compound, C20H16N6O2\ was synthesized by reflux with isonicotinic hydrazide and terephthaldehyde in ethanol solvent with the acidic condition. The single-crystal X-ray structure determination of the title compound,\ N, N-(1,4-phenylene bis (methanylylidene) di(iso-nicotinic hydrazide), reveals that the molecule crystallizes in center of symmetry with water molecules (Dihydrated form, C20H16N6O2.2H2O) through N-H...O and C-H...O hydrogen bondings. Further, the crystal structure is stabilized by O-H...O and weak C-H...N hydrogen bondings with the formation of infinite chain and dimer. Further, surface analysis and fingerprint plot reveal that the significant hydrogen bonding such as H{\textbullet}{\textbullet}{\textbullet}O (15.9\%) and N{\textbullet}{\textbullet}{\textbullet}H (11.4\%) interactions play the most crucial role for its molecular packing.

}, doi = {10.1016/j.cdc.2020.100401}, author = {Ingle, Kapil S. and Mohurle, Smital A. and Bairagi, Keshab M. and Shaikh, Tabrez R. and Venugopala, Katharigatta N. and Chandrashekharappa, Sandeep and Gonnade, Rajesh G. and Nayak, Susanta K.} } @article {46990, title = {Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors (vol 9, pg 36343, 2019)}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JAN}, pages = {3991}, type = {Correction}, abstract = {

Correction for {\textquoteleft}Synthesis of high surface area porous carbon from anaerobic digestate and it{\textquoteright}s electrochemical study as an electrode material for ultracapacitors{\textquoteright} by Vikash Chaturvedi et al., RSC Adv., 2019, 9, 36343-36350.

}, doi = {10.1039/d0ra90003f}, author = {Chaturvedi, Vikash and Usgaonkar, Saurabh and Shelke, Manjusha V.} } @article {46946, title = {Synthesis of silver nanoparticles colloids in imidazolium halide ionic liquids and their antibacterial activities for gram-positive and gram-negative bacteria}, journal = {Chemosphere}, volume = {243}, year = {2020}, month = {MAR}, pages = {125302}, type = {Article}, abstract = {

Four 1-butyl-3-methylimidazolium halide ionic liquids were synthesized via metathesis and anion exchange reactions. Silver nanoparticles (AgNPs) colloids were synthesized in four ionic liquids in the pressurized reactor by reduction of silver nitrate with hydrogen gas, without adding solvents or stabilizing agents. Antibacterial activities of base ionic liquids and AgNPs colloids in ionic liquids were reviewed by well-diffusion method for gram-positive Bacillus cereus (NCIM-2155) and gram-negative Escherichia coli (NCIM-2931) bacteria. Antibacterial activities of ionic liquids and AgNPs colloids in ionic liquids were observed to be controlled by ionic liquids anions and AgNPs particle size. The 1 -butyl-3-methylimidazolium iodide ionic liquid exhibited higher antibacterial activities among the studied ionic liquids. Further, the presence of AgNPs in 1-butyl-3-methylimidazolium iodide, ionic liquid enhanced its antibacterial activity for Bacillus cereus and Escherichia coli bacteria. (C) 2019 Elsevier Ltd. All rights reserved.

}, keywords = {Anion effect, antibacterial activity, Imidazolium halides, ionic liquids, silver nanoparticles}, issn = {0045-6535}, doi = {10.1016/j.chemosphere.2019.125302}, author = {Patil, Virendra and Mahajan, Swapnil and Kulkarni, Mohan and Patil, Kashinath and Rode, Chandrashekhar and Coronas, Alberto and Yi, Gi-Ra} } @article {47004, title = {TDR Targets 6: driving drug discovery for human pathogens through intensive chemogenomic data integration}, journal = {Nucleic Acids Research}, volume = {48}, year = {2020}, month = {JAN }, pages = {D992-D1005}, type = {Article}, abstract = {

The volume of biological, chemical and functional data deposited in the public domain is growing rapidly, thanks to next generation sequencing and highly-automated screening technologies. These datasets represent invaluable resources for drug discovery, particularly for less studied neglected disease pathogens. To leverage these datasets, smart and intensive data integration is required to guide computational inferences across diverse organisms. The TDR Targets chemogenomics resource integrates genomic data from human pathogens and model organisms along with information on bioactive compounds and their annotated activities. This report highlights the latest updates on the available data and functionality in TDR Targets 6. Based on chemogenomic network models providing links between inhibitors and targets, the database now incorporates network-driven target prioritizations, and novel visualizations of network subgraphs displaying chemical- and target-similarity neighborhoods along with associated target-compound bioactivity links. Available data can be browsed and queried through a new user interface, that allow users to perform prioritizations of protein targets and chemical inhibitors. As such, TDR Targets now facilitates the investigation of drug repurposing against pathogen targets, which can potentially help in identifying candidate targets for bioactive compounds with previously unknown targets. TDR Targets is available at https://tdrtargets.org.

}, issn = {0305-1048}, doi = {10.1093/nar/gkz999}, author = {Landaburu, Lionel Uran and Berenstein, Ariel J. and Videla, Santiago and Maru, Parag and Shanmugam, Dhanasekaran and Chernomoretz, Ariel and Aguero, Fernan} } @article {46644, title = {Teixobactin: a paving stone toward a new class of antibiotics?}, journal = {Journal of Medicinal Chemistry}, volume = {63}, year = {2020}, month = {NOV }, pages = {12171-12195}, type = {Article}, abstract = {

Antimicrobial resistance is a serious threat to human health worldwide, prompting research efforts on a massive scale in search of novel antibiotics to fill an urgent need for a remedy. Teixobactin, a macrocyclic depsipeptide natural product, isolated from uncultured bacteria (Elef theria terrae), displayed potent activity against several Gram-positive pathogenic bacteria. The distinct pharmacological profile and interesting structural features of teixobactin with nonstandard amino acid (three Damino acids and L-allo-enduracididine) residues attracted several research groups to work on this target molecule in search of novel antibiotics with new mechanism. Herein, we present a comprehensive and critical perspective on immense possibilities offered by teixobactin in the domain of drug discovery. Efforts made by various research groups since its isolation are discussed, highlighting the molecule{\textquoteright}s considerable potential with special emphasis on replacement of amino acids. Critical analysis of synthetic efforts, SAR studies, and the way forward are provided hereunder.

}, issn = {0022-2623}, doi = {10.1021/acs.jmedchem.0c00173}, author = {Gunjal, Vidya B. and Thakare, Ritesh and Chopra, Sidharth and Reddy, D. Srinivasa} } @article {46741, title = {Terminal uridylyl transferase mediated site-directed access to clickable chromatin employing CRISPR-dCas9}, journal = {Journal of the American Chemical Society}, volume = {142}, year = {2020}, month = {AUG}, pages = {13954-13965}, type = {Article}, abstract = {

Locus-specific interrogation of target genes employing functional probes such as proteins and small molecules is paramount in decoding the molecular basis of gene function and designing tools to modulate its downstream effects. In this context, CRISPR-based gene editing and targeting technologies have proved tremendously useful, as they can be programmed to target any gene of interest by simply changing the sequence of the single guide RNA (sgRNA). Although these technologies are widely utilized in recruiting genetically encoded functional proteins, display of small molecules using CRISPR system is not well developed due to the lack of adequate techniques. Here, we have devised an innovative technology called sgRNA-Click (sgR-CLK) that harnesses the power of bioorthogonal click chemistry for remodeling guide RNA to display synthetic molecules on target genes. sgR-CLK employs a novel posttranscriptional chemoenzymatic labeling platform wherein a terminal uridylyl transferase (TUTase) was repurposed to generate clickable sgRNA of choice by site-specific tailoring of multiple azide-modified nucleotide analogues at the 3{\textquoteright} end. The presence of a minimally invasive azide handle assured that the sgRNAs are indeed functional. Notably, an azide-tailed sgRNA targeting the telomeric repeat served as a Trojan horse on the CRISPR-dCas9 system to guide synthetic tags (biotin) site-specifically on chromatin employing copper-catalyzed or strain-promoted click reactions. Taken together, sgR-CLK presents a significant advancement on the utility of bioorthogonal chemistry, TUTase, and the CRISPR toolbox, which could offer a simplified solution for site-directed display of small molecule probes and diagnostic tools on target genes.

}, issn = {0002-7863}, doi = {10.1021/jacs.0c06541}, author = {George, Jerrin Thomas and Azhar, Mohd and Aich, Meghali and Sinha, Dipanjali and Ambi, Uddhav B. and Maiti, Souvik and Chakraborty, Debojyoti and Srivatsan, Seergazhi G.} } @article {46631, title = {Total synthesis and absolute configuration determination of Ktedonoketone, a benzenoid metabolite from Thermophilic bacterium}, journal = {Tetrahedron Letters}, volume = {61}, year = {2020}, month = {NOV }, pages = {152526}, type = {Article}, abstract = {

The successful total synthesis of both enantiomers of ktedonoketone allowed us to decipher an unambiguous assignment of absolute configuration of the natural product. The concise synthesis highlights Wacker oxidation and aldol condensation as key steps. In addition to this, the current synthetic route is suitable to access a library of compounds on the similar skeleton as one can use readily available amino acids and Grignard reagents as variants. (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {Absolute configuration, Ktedonoketone, Total synthesis, Wacker oxidation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2020.152526}, author = {Dandawate, Monica and Choudhury, Rahul and Krishna, Gamidi Rama and Reddy, D. Srinivasa} } @article {46759, title = {Transition metal nickel prevents Tau aggregation in Alzheimer{\textquoteright}s disease}, journal = {International Journal of Biological Macromolecules}, volume = {156}, year = {2020}, month = {AUG }, pages = {1359-1365}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is the leading cause of dementia, effecting majority of aged people worldwide. The multifaceted effectors of Alzheimer{\textquoteright}s disease primarily include Tau, amyloid-beta along with hyper activation of kinases, oxidative stress and mutations etc., makes it challenging to design therapeutics. Tau is a microtubule-associating protein, which is subjected to cellular stress resulting in the formation of neurofibrillary tangles, leading to loss of affinity for microtubules. This causes loss of microtubule stability and in turn alters axonal integrity. In the present work, emphasis towards understanding interaction of nickel with Tau was made. Metals such as iron, zinc, copper and lead etc., are known to modulate Tau conformation and enhance its aggregation. Our results showed the deliverance of Tau aggregation by nickel and its synthetic morpholine conjugate. Nickel prevents aggregation by inducing degradation of Tau as evidenced by SDS-PAGE and TEM. Nickel and the synthetic conjugate being non toxic to neuro2a cells and prevent Tau aggregation, might direct these complexes to overcome AD. (C) 2019 Published by Elsevier B.V.

}, keywords = {Aggregation, Alzheimer{\textquoteright}s disease, metals, Morpholine, Nickel chloride, Tau}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2019.11.176}, author = {Gorantla, Nalini Vijay and Das, Rashmi and Balaraman, Ekambaram and Chinnathambi, Subashchandrabose} } @article {46696, title = {Ultrahigh molecular weight polyethylene: catalysis, structure, properties, processing and applications}, journal = {Progress in Polymer Science}, volume = {109}, year = {2020}, month = {OCT}, pages = {101290}, type = {Review}, abstract = {

Ultrahigh molecular weight polyethylene (UHMWPE) belongs to an emerging class of high-performance specialty polymers with a unique set of properties and applications. The field has witnessed many scientific and technological advances in recent years. However, synthesis of UHMWPE is not a trivial exercise and presents several challenges. This review addresses these fundamental challenges and provides an overview of recent developments in the field of UHMWPE. The nature of catalysts, reaction conditions that favor its formation, their physical properties, methods of processing them into products, and their applications are discussed. Recent developments in formation of UHMWPE in a disentangled state by use of appropriate catalysts and reaction conditions are also discussed. This has elicited considerable interest as a means of enabling melt processing of UHMWPE. This review provides a comprehensive source of information and understanding of the multifaceted aspects of UHMWPE with specific reference to chemistry, catalysis, processes for manufacturing, and an analysis of catalyst structure-polymer property relationships. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Catalysts for UHMWPE, Disentangled UHMWPE, Entangled UHMWPE, polyethylene (PE), Ultrahigh molecular weight (UHMW) PE}, issn = {0079-6700}, doi = {10.1016/j.progpolymsci.2020.101290}, author = {Patel, Ketan and Chikkali, Samir H. and Sivaram, Swaminathan} } @article {46791, title = {Uncovering the origin of enhanced field emission properties of rGO-MnO(2)heterostructures: a synergistic experimental and computational investigation}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JUL }, pages = {25988-25998}, type = {Article}, abstract = {

The unique structural merits of heterostructured nanomaterials including the electronic interaction, interfacial bonding and synergistic effects make them attractive for fabricating highly efficient optoelectronic devices. Herein, we report the synthesis of MnO(2)nanorods and a rGO/MnO(2)nano-heterostructure using low-cost hydrothermal and modified Hummers{\textquoteright} methods, respectively. Detailed characterization and confirmation of the structural and morphological properties are doneviaX-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM). Compared to the isolated MnO(2)nanorods, the rGO/MnO(2)nano-heterostructure exhibits impressive field emission (FE) performance in terms of the low turn-on field of 1.4 V mu m(-1)for an emission current density of 10 mu A cm(-2)and a high current density of 600 mu A cm(-2)at a relatively very low applied electric field of 3.1 V mu m(-1). The isolated MnO(2)nanorods display a high turn-on field of 7.1 for an emission current density of 10 mu A cm(-2)and a low current density of 221 mu A cm(-2)at an applied field of 8.1 V mu m(-1). Besides the superior FE characteristics of the rGO/MnO(2)nano-heterostructure, the emission current remains quite stable over the continuous 2 h period of measurement. The improvement of the FE characteristics of the rGO/MnO(2)nano-heterostructure can be ascribed to the nanometric features and the lower work function (6.01 and 6.12 eV for the rGO with 8\% and 16\% oxygen content) compared to the isolated alpha-MnO2(100) surface (phi= 7.22 eV) as predicted from complementary first-principles electronic structure calculations based on density functional theory (DFT) methods. These results suggest that an appropriate coupling of rGO with MnO(2)nanorods would have a synergistic effect of lowering the electronic work function, resulting in a beneficial tuning of the FE characteristics.

}, doi = {10.1039/d0ra03360j}, author = {Rondiya, Sachin R. and Karbhal, Indrapal and Jadhav, Chandradip D. and Nasane, Mamta P. and Davies, Thomas E. and Shelke, V. Manjusha and Jadkar, Sandesh R. and Chavan, Padmakar G. and Dzade, Nelson Y.} } @article {46756, title = {Understanding fundamentals of hepatocellular carcinoma to design next-generation chitosan nano-formulations: Beyond chemotherapy stride}, journal = {Journal of Drug Delivery Science and Technology}, volume = {58}, year = {2020}, month = {AUG}, pages = {101723}, type = {Article}, abstract = {

Hepatocellular carcinoma (HCC) is the deadliest form of liver cancer. Clinically, the main strategies currently being used for the treatment of HCC are surgery, radiotherapy and chemotherapy. Conventional chemotherapy has major drawbacks such as poor bioavailability, high-dose requirements, adverse side effects, low therapeutic indices, and non-specific drug targeting. Therefore, targeted drug delivery systems are fast becoming new tools for the selective killing of cancer cells. Chitosan (CS) is a biodegradable, biocompatible, cationic and natural biopolymer that also exhibits anti-cancer property which is now being explored as a promising candidate for targeted drug delivery. This review outlines an overview of the causative agents, microenvironment, pathophysiology, surface-biomarkers and physiological barriers of HCC. Then, the cellular internalization pathways of nanomedicine and the important physicochemical properties of delivery agents are discussed. The benefits of targeted therapy over conventional therapy with regard to HCC are also discussed. The main objective of this review was to summarize the current knowledge in the field of chitosan-based drug delivery for the management of HCC along with its limitations in a comprehensive and systematic way. This review attempts to provide a holistic roadmap for designing the next-generation chitosan-based drug delivery systems for HCC management.

}, keywords = {chitosan nanoparticles, Hepatocellular carcinoma, Pathophysiology, Surface biomarkers, Targeted Drug Delivery, Tumor microenvironment}, issn = {1773-2247}, doi = {10.1016/j.jddst.2020.101723}, author = {Jaiswal, Neha and Chaudhari, Ravindra D. and Chaudhari, Bhushan P.} } @article {46878, title = {Whole-cell phenotypic screening of medicines for malaria venture pathogen box identifies specific inhibitors of plasmodium falciparum late-stage development and egress}, journal = {Antimicrobial Agents and Chemotherapy}, volume = {64}, year = {2020}, month = {MAY}, pages = {e01802-19}, type = {Article}, abstract = {

We report a systematic, cellular phenotype-based antimalarial screening of the Medicines for Malaria Venture Pathogen Box collection, which facilitated the identification of specific blockers of late-stage intraerythrocytic development of Plasmodium falciparum. First, from standard growth inhibition assays, we identified 173 molecules with antimalarial activity (50\% effective concentration [EC50] \<= 10 mu M), which included 62 additional molecules over previously known antimalarial candidates from the Pathogen Box. We identified 90 molecules with EC50 of \<= 1 mu M, which had significant effect on the ring-trophozoite transition, while 9 molecules inhibited the trophozoite-schizont transition and 21 molecules inhibited the schizontring transition (with \>= 50\% parasites failing to proceed to the next stage) at 1 mu M. We therefore rescreened all 173 molecules and validated hits in microscopy to prioritize 12 hits as selective blockers of the schizont-ring transition. Seven of these molecules inhibited the calcium ionophore-induced egress of Toxoplasma gondii, a related apicomplexan parasite, suggesting that the inhibitors may be acting via a conserved mechanism which could be further exploited for target identification studies. We demonstrate that two molecules, MMV020670 and MMV026356, identified as schizont inhibitors in our screens, induce the fragmentation of DNA in merozoites, thereby impairing their ability to egress and invade. Further mechanistic studies would facilitate the therapeutic exploitation of these molecules as broadly active inhibitors targeting late-stage development and egress of apicomplexan parasites relevant to human health.

}, keywords = {DNA fragmentation, egress, Medicines for Malaria Venture, MMV, Pathogen Box, phenotypic screening, Plasmodium falciparum, schizonts, stage-specific inhibition}, issn = {0066-4804}, doi = {10.1128/AAC.01802-19}, author = {Patra, Alok Tanala and Hingamire, Tejashri and Belekar, Meenakshi A. and Xiong, Aoli and Subramanian, Gowtham and Bozdech, Zbynek and Preiser, Peter and Shanmugam, Dhanasekaran and Chandramohanadas, Rajesh} } @article {47686, title = {Active and recyclable gold metal nanoparticles catalyst supported on nitrogen-doped mesoporous carbon for chemoselective hydrogenation of cinnamaldehyde to cinnamyl alcohol}, journal = {Chemistry-An Asian Journal}, volume = {16}, year = {2021}, month = {SEP }, pages = {2702-2722}, type = {Article}, abstract = {Several supported gold metal catalysts with different Au nanoparticles sizes were prepared and evaluated for the chemoselective hydrogenation of cinnamaldehyde (CA) to cinnamyl alcohol (CAL). To investigate the structure-activity relationship, stability of catalyst, heterogeneity and recyclability, the structural characteristics of materials and Au catalysts (fresh and spent catalysts) were studied by employing variety of physico-chemical techniques. The interrelationship among Au nanoparticles size (nm) with turnover frequency (h(-1)) of Au catalysts has also been explored. Among the various Au catalysts tested, nitrogen-doped mesoporous carbon (NMC) supported Au catalyst having homogeneously dispersed (78.8\%) Au nanoparticles (1.6 nm) synthesized by sol-immobilization method (Au-NMC-SI) demonstrated improved catalytic activity affording 78\% CAL selectivity and 94.2\% CA conversion without using any promoter. Moreover, Au-NMC-SI catalyst exhibited good recyclability and stability. The catalyst synthesis approach described in this investigation opens up a novel strategy for the design of highly efficient metal nano-catalysts supported on NMC materials.}, keywords = {Au Nanoparticles, heterogeneous catalysis, Hydrogenation, Nitrogen-doped mesoporous carbon, Support-Metal interaction}, issn = {1861-4728}, doi = {10.1002/asia.202100552}, author = {Nagpure, Atul S. and Gogoi, Pranjal and Chilukuri, Satyanarayana V.} } @article {47578, title = {Active K-OMS-2 supported catalyst for hydrogenolysis of glycerol}, journal = {ChemistrySelect}, volume = {6}, year = {2021}, month = {SEP}, pages = {8700-8708}, type = {Article}, abstract = {Propanediols are very important chemical intermediates, which need to be prepared through commercially viable routes. Cryptomelane type octahedral molecular sieve-2 (K-OMS-2), a cheap and environmentally benign microporous oxide was employed to support Ru and used as a catalyst to get 1,2-propanediol (1,2-PDO) selectively through hydrogenolysis of glycerol. Three catalysts with different Ru content were prepared and evaluated for glycerol hydrogenolysis. Among these, 1 wt.\% Ru-K-OMS-2 showed reasonably good activity towards 1,2-PDO formation under moderate reaction conditions even at lower Ru loading (0.9 wt.\%). When other metals such as Cu and Ni were supported on K-OMS-2, their performance was inferior compared to Ru-supported catalysts. All the catalysts were characterized using various physicochemical techniques like XRD, N-2-sorption, TPD, H-2-TPR, TGA, ICP-OES, FE-SEM and TEM. The enhanced catalytic activity with the 1 wt.\%Ru-K-OMS-2 catalyst was attributed to the better Ru metal dispersion, higher active metal surface area, basic strength, and porosity of the support. The catalyst was found to be recyclable. Analysis of spent catalyst by TEM showed disintegration of Ru nanoparticles to smaller ones, under high H-2 pressure at the reaction temperature. Smaller Ru particles are expected to promote C-C bond cleavage thus suppressing 1,2-PDO formation. Furthermore, a relationship between the TOF value, Ru nanoparticles size, and the basic strength of the catalysts was established, which provides dipper insight into the different catalytic behavior of the catalysts.}, keywords = {Glycerol, Hydrogenolysis, octahedral molecular sieves, Propanediols, selectivity}, issn = {2365-6549}, doi = {10.1002/slct.202101664}, author = {Gogoi, Pranjal and Chilukuri, Satyanarayana and Thirumalaiswamy, Raja} } @article {47128, title = {Alpha-Linolenic acid inhibits Tau aggregation and modulates Tau conformation}, journal = {International Journal of Biological Macromolecules}, volume = {166}, year = {2021}, month = {JAN }, pages = {687-693}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is characterized by important patho-proteins, which being composed of Amyloid-beta, plaques and intracellular neurofibrillary tangles of Tau. Intrinsically disordered protein tau has several interacting partners, which are necessary for its normal functioning. Tau has been shown to interact with various proteins, nucleic acid, and lipids. alpha-Linolenic acid (ALA) a plant-based omega-3 fatty acid has been studied for its role as neuroprotective and beneficial fatty add in the brain. In this study, we are focusing on the ability of ALA to induce spontaneous assembly in tau protein. ALA inhibited the Tau aggregation as indicated by reduced ThS fluorescence kinetics, which indicates no aggregation of Tau. Similarly, SDS-PAGE analysis supported that ALA exposure inhibited the aggregation as no higher-order tau species were observed. Along with its ability to impede the aggregation of Tau, ALA also maintains a native random coiled structure, which was estimated by CD spectroscopy. Finally, TEM analysis showed that the formation of Tau fibrils was found to be discouraged by ALA. Hence, conclusion of the study suggested that ALA profoundly inhibited aggregation of Tau and maintained it{\textquoteright}s the random-coil structure. (C) 2020 Elsevier B.V. All rights reserved.

}, keywords = {alpha-linolenic acid, Alzheimer{\textquoteright}s disease, Free fatty adds, Tau conformation, Tau fibrillization}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2020.10.226}, author = {Desale, Smita Eknath and Dubey, Tushar and Chinnathambi, Subashchandrabose} } @article {47124, title = {Alpha-Linolenic acid modulates phagocytosis and endosomal pathways of extracellular Tau in microglia}, journal = {Cell Adhesion \& Migration}, volume = {15}, year = {2021}, month = {JAN }, pages = {84-100}, type = {Article}, abstract = {

Microglia, the resident immune cells, were found to be activated to inflammatory phenotype in Alzheimer{\textquoteright}s disease (AD). The extracellular burden of amyloid-beta plaques and Tau seed fabricate the activation of microglia. The seeding effect of extracellular Tau species is an emerging aspect to study about Tauopathies in AD. Tau seeds enhance the propagation of disease along with its contribution to microglia-mediated inflammation. The excessive neuroinflammation cumulatively hampers phagocytic function of microglia reducing the clearance of extracellular protein aggregates. Omega-3 fatty acids, especially docosahexaenoic acid and eicosapentaenoic acid, are recognized to induce anti-inflammatory phenotype of microglia. In addition to increased cytokine production, omega-3 fatty acids enhance phagocytic receptors expression in microglia. In this study, we have observed the phagocytosis of extracellular Tau in the presence of alpha-linolenic acid (ALA). The increased phagocytosis of extracellular Tau monomer and aggregates have been observed upon ALA exposure to microglia cells. After internalization, the degradation status of Tau has been studied with early and late endosomal markers Rab5 and Rab7. Further, the lysosome-mediated degradation of internalized Tau was studied with LAMP-2A, a lysosome marker. The enhanced migratory ability in the presence of ALA could be beneficial for microglia to access the target and clear it. The increased migration of microglia was found to induce the microtubule-organizing center repolarization. The data indicate that the dietary fatty acids ALA could significantly enhance phagocytosis and intracellular degradation of internalized Tau. Our results suggest that microglia could be influenced to reduce extracellular Tau seed with dietary fatty acids.

}, keywords = {alpha-linolenic acid, endosomal markers, Fatty acids, MTOC repolarization, Phagocytosis, Tauopathy}, issn = {1933-6918}, doi = {10.1080/19336918.2021.1898727}, author = {Desale, Smita Eknath and Chinnathambi, Subashchandrabose} } @article {47367, title = {Amyloid-beta-derived peptidomimetics inhibits tau aggregation}, journal = {ACS Omega }, volume = {6}, year = {2021}, month = {MAY }, pages = {11131-11138}, type = {Article}, abstract = {

The aggregation of tau protein is one of the hallmarks for Alzheimer{\textquoteright}s disease, resulting in neurodegeneration. The peptidomimetics strategy to prevent tau aggregation is more specific over other small molecules. In the present study, we analyzed the effect of amyloid-beta-derived peptidomimetics for inhibiting heparin-induced tau aggregation in vitro. These peptides and their derivatives were known to prevent aggregation of amyloid-beta. KLVFF is a hydrophobic sequence of the pentapeptide that prevented tau aggregation as observed by thioflavin S fluorescence, transmission electron microscopy, and circular dichroism spectroscopy. P4 and P5 also prevented assembly of tau into aggregates and formed short fibrils. The beta-sheet breaker LPFFD was however ineffective in preventing tau aggregation. The peptides further demonstrated reversal of tau-induced cytotoxicity in a dose-dependent manner. Our results suggested that these peptides can also be used to inhibit tau aggregation and also, toxicity induced by tau could be considered as potential molecules that have an effect on tau as well as amyloid-beta.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b03497}, author = {Gorantla, V. Nalini and Sunny, Lisni P. and Rajasekhar, Kolla and Nagaraju, Pramod G. and Priyadarshini, Poornima C. G. and Govindaraju, Thimmaiah and Chinnathambi, Subashchandrabose} } @article {47581, title = {Antimicrobial and antioxidant potential of a standardized ayurvedic formulation explains its clinical efficacy as gargles in post-radiotherapy oral cancer patients}, journal = {Journal of Herbal Medicine}, volume = {30}, year = {2021}, month = {DEC}, pages = {100510}, type = {Article}, abstract = {Introduction: Exploring the antioxidant and antimicrobial potential of a standardized proprietary poly-herbal powder and evaluating its clinical efficacy as an Ayurvedic gargle (Gandush) for reducing oral microbial load and side effects of radiotherapy in oral cavity cancer patients was the aim of this pilot study. Methods: Formulation (Gandush Churna) comprising Terminalia chebula Retz., Terminalia bellirica (Gaertn.) Roxb., Phyllanthus emblica L. and Curcuma longa L. and its decoction (Gandush Kwath) were standardized. In-vitro antioxidant potential and antimicrobial activity against selective bacterial and fungal strains were studied. Oral cavity cancer patients who had undergone radiotherapy were enrolled. The decoction was prepared by soaking Gandush Churna in water, boiling and reducing by 50 \%; and was used for gargling, twice a day, for 7 days. Total microbial count and identification of microbiota in the oral cavity as well as symptoms graded as per Common Terminology Criteria for Adverse Events, were noted before and after the treatment. Change in microbial load and shift in symptom gradations were analyzed. Results: A monograph with physicochemical, chromatography, safety and stability parameters was developed. The decoction possessed good in-vitro antioxidant and antimicrobial activities. Gargling therapy significantly reduced bacterial load while mildly controlled the fungal infection in oral cavity cancer patients. It significantly reduced the severity of symptoms viz. stomatitis and local pain, with considerably decreased xerostomia and dysphagia. Conclusions: Intervention of gargle therapy using poly-herbal formulation may serve as an effective complementary treatment to improve oral hygiene and reduce side effects of radiotherapy in oral cancer patients.}, keywords = {Anti-microbial, Antioxidant, Gandush, Gargle therapy, Oral cavity cancers, Radiotherapy side effects}, issn = {2210-8033}, doi = {10.1016/j.hermed.2021.100510}, author = {Chavan, Sandeep and Bhuvad, Sushama and Kumbhlakar, Bhagyashri and Auti, Jyoti and Walunj, Tanhaji and Pathak, Shridevi and Tanpure, Rahul and Gujar, Shweta and Shinde, Jagdish and Kulkarni, Arvind and Gupta, Vidya and Deshmukh, Vineeta and Sardeshmukh, Sadanand} } @article {47790, title = {Antitumor effects of Ir(III)-2H-indazole complexes for triple negative breast cancer}, journal = {Inorganic Chemistry}, volume = {60}, year = {2021}, month = {NOV}, pages = {17593-17607}, type = {Article}, abstract = {In this work, we have synthesized a series of novel C,N-cyclometalated 2H-indazole-ruthenium(II) and -iridium(III) complexes with varying substituents (H, CH3, isopropyl, and CF3) in the R4 position of the phenyl ring of the 2H-indazole chelating ligand. All of the complexes were characterized by 1H, 13C, high-resolution mass spectrometry, and elemental analysis. The methyl-substituted 2H-indazole-Ir(III) complex was further characterized by single-crystal X-ray analysis. The cytotoxic activity of new ruthenium(II) and iridium(III) compounds has been evaluated in a panel of triple negative breast cancer (TNBC) cell lines (MDA-MB-231 and MDA-MB-468) and colon cancer cell line HCT-116 to investigate their structure{\textendash}activity relationships. Most of these new complexes have shown appreciable activity, comparable to or significantly better than that of cisplatin in TNBC cell lines. R4 substitution of the phenyl ring of the 2H-indazole ligand with methyl and isopropyl substituents showed increased potency in ruthenium(II) and iridium(III) complexes compared to that of their parent compounds in all cell lines. These novel transition metal-based complexes exhibited high specificity toward cancer cells by inducing alterations in the metabolism and proliferation of cancer cells. In general, iridium complexes are more active than the corresponding ruthenium complexes. The new Ir(III)-2H-indazole complex with an isopropyl substituent induced mitochondrial damage by generating large amounts of reactive oxygen species (ROS), which triggered mitochondrion-mediated apoptosis in TNBC cell line MDA-MB-468. Moreover, this complex also induced G2/M phase cell cycle arrest and inhibited cellular migration of TNBC cells. Our findings reveal the key roles of the novel C{\textendash}N-cyclometalated 2H-indazole-Ir(III) complex to specifically induce toxicity in cancer cell lines through contributing effects of ROS-induced mitochondrial disruption along with chromosomal and mitochondrial DNA target inhibition.}, doi = {10.1021/acs.inorgchem.1c02193}, url = {https://doi.org/10.1021/acs.inorgchem.1c02193}, author = {Panchangam, Rajeeva Lochana and Rao, Ramdas Nishanth and Balamurali, Musuvathi Motilal and Hingamire, Tejashri B. and Shanmugam, Dhanasekaran and Manickam, Venkatraman and Chanda, Kaushik} } @article {47362, title = {Antiviral drugs prioritization for COVID-19 management based on rational selection}, journal = {Current Science}, volume = {120}, year = {2021}, month = {MAY }, pages = {1464-1470}, type = {Article}, abstract = {

The SARS-CoV-2 infection has resulted in COVID-19 pandemic worldwide. It has infected around 0.1 billion individuals and caused 2 million fatalities across the globe till mid-January 2021. Drug repurposing has been utilized as the most preferred therapeutic intervention for COVID-19 mitigation due to its necessity and feasibility. To prioritize therapeutic regime against COVID-19, we used 61 antiviral drugs and their combinations. Selected molecules were subjected to virtual screening against: (i) human angiotensin-converting enzyme 2 receptor binding domain (hACE-2) which serves as an anchor for virus attachment and entry, (ii) SARS-CoV-2 RNA dependent RNA polymerase (RdRp) responsible for viral RNA replication, and (iii) SARS-CoV-2 main protease (M-Pro) needed for viral polyprotein slab proteolytic processing. Based on docking score, pharmacodynamic and pharmacokinetic parameters, combinations of Daclatasvir, Elbasvir, Indinavir, Ledipasvir, Paritaprevir and Rilpivirine were analysed further. Our analysis suggested Sofosbuvir in combination with Ledipasvir and Daclatasvir as potential therapeutic agents for SARS-CoV-2. The combined score suggests that these combinations have superior anti-SARS-CoV-2 potential than Remdesivir and other investigational drugs. The present work provides a rationale-based approach to select drugs with possible anti-SARS-CoV-2 activity for further clinical evaluation.

}, keywords = {Drug repurposing, hACE-2, main protease, RNA dependent RNA polymerase, SARS-CoV-2}, issn = {0011-3891}, doi = {10.18520/cs/v120/i9/1464-1470}, author = {Joshi, Rakesh S. and Giri, Ashok P. and Kulkarni, Mahesh J. and Gupta, Mahesh and Verma, Savita and Chaudhry, Dhruva and Deshmukh, Narendra and Chugh, Anita} } @article {47349, title = {Application of allylic amine formation from aziridine-2-ol under appel reaction condition: synthesis of N-(tert-butoxycarbonyl)-D-vinyl glycine methyl ester}, journal = {Tetrahedron Letters}, volume = {73}, year = {2021}, month = {JUN }, pages = {153119}, type = {Article}, abstract = {

PPh3/I-2/imidazolde mediated allyl amine formation from aziridine-2-alcohol was explored for the synthesis of N-(tert-butoxycarbonyl)-D-vinyl glycine methyl ester. (C) 2021 Published by Elsevier Ltd.

}, keywords = {Allyl amine, Aziridine-2-alcohol, Aziridinium ion, Birch reaction, Ring opening}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2021.153119}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Patil, Niteen B. and Kalbhor, Dinesh B.} } @article {47600, title = {Aqueous methanol to formaldehyde and hydrogen on Pd/TiO2 by photocatalysis in direct sunlight: structure dependent activity of nano-Pd and atomic Pt-coated counterparts}, journal = {ACS Applied Energy Materials}, volume = {4}, year = {2021}, month = {NOV }, pages = {13347-13360}, type = {Article}, abstract = {In the present investigation, facet-controlled Pd nanoparticles with nanocube (Pd-NC) and truncated octahedron (Pd-TO) morphologies, and their counterparts with half-a-monolayer of atomic Pt coated (0.5 theta(Pt)-Pd-NC and 0.5 theta(Pt)-Pd-TO) surfaces were prepared. All of them were characterized and evaluated as cocatalyst after supporting them on commercial titania (P25) (Pd-NC/P25, Pd-TO/P25, 0.5 theta(Pt)-Pd-NC/P25, and 0.5 theta(Pt)-Pd-TO/P25) under direct sunlight and/or one sun conditions for the oxidation of methanol to formaldehyde along with solar hydrogen production. Pd-NC/P25 shows higher activity for hydrogen generation compared to Pd-TO/P25; however, activity reversal occurs with the above cocatalysts, but, after Pt-coating with further enhanced activity. The highest conversion of methanol (0.2 mu mol/h.mg) to 100\% selective formaldehyde was observed with 0.5 theta(Pt)-Pd-TO/P25, while other catalysts show significantly lower methanol conversion in the following order: 0.5 theta(Pt)-Pd-TO/P25 > 0.5 theta(Pt)-Pd-NC/P25 > Pd-NC/P25 > Pd-TO/P25. Pt-coated on (111) facets of Pd-TO simulates the activity associated as that of Pt(111) facets and demonstrating the highest and facet dependent activity. The present study is truly in resonance with exploiting the surface properties for heterogeneous catalysis, and highlights that less than a monolayer of Pt is sufficient to simulate the activity as that of bulk Pt. It is worth exploring this concept to other metals and substrates too.}, keywords = {heterogeneous catalysis, Nanomaterials, Oxidation, Photocatalysis, surface modification}, issn = {2574-0962}, doi = {10.1021/acsaem.1c03080}, author = {Nalajala, Naresh and Salgaonkar, Kranti N. and Chauhan, Inderjeet and Mekala, Siva Prasad and Gopinath, Chinnakonda S.} } @article {47791, title = {Autophagic pathways to clear the tau aggregates in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, volume = {41}, year = {2021}, month = {AUG}, pages = {1175-1181}, abstract = {Tau is a microtubule-associated protein with an intrinsically unstructured conformation. Tau is subjected to several pathological post-translational modifications (PTMs), leading to its loss of interaction with microtubules and accumulation as neurofibrillary tangles (NFTs) in neurons. Tau aggregates impede functions of endoplasmic reticulum and mitochondria leading to the generation of oxidative stress and in turn amplifying the Tau aggregation. Tau is channelled to chaperones for folding into their native form, which otherwise causes its degradation and clearance. Cellular response triggers the activation of ubiquitin{\textendash}proteasome system or autophagy to facilitate Tau degradation, based on the PTMs or mutations associated with Tau. Further, autophagy can be selective where Hsc70 interacts with Tau in monomeric, oligomeric and aggregated form and drives its clearance by chaperone-mediated autophagy pathway (CMA). Lysosome-associated membrane proteins-2A (LAMP-2A) is the key player of CMA that recognises Hsc70-Tau complex and triggers the downstream cascade. Thus, it becomes challenging for mutant Tau to be cleared by CMA as it loses its affinity for Hsc70 and LAMP-2A. In such a scenario, Tau might be degraded by macroautophagy otherwise sequestered by aggresomes. Henceforth, the degradation of Tau and its blockage that is associated with various PTMs of Tau would explain the dynamics of Tau degradation or accumulation in AD. Further, unveiling the role of accessory proteins involved in these degradation pathways would help in understanding their loss of function and preventing Tau clearance. }, doi = {10.1007/s10571-020-00897-0}, author = {vijay nalini, Gorantla and Chinnathambi, Subashchandrabose} } @article {47069, title = {Baicalein inhibits heparin-induced Tau aggregation by initializing non-toxic Tau oligomer formation}, journal = {Cell Communication and Signaling}, volume = {19}, year = {2021}, month = {FEB }, pages = {16}, type = {Article}, abstract = {

Background: Amyloid aggregate deposition is the key feature of Alzheimer{\textquoteright}s disease. The proteinaceous aggregates found in the afflicted brain are the intra-neuronal neurofibrillary tangles formed by the microtubule-associated protein Tau and extracellular deposits, senile plaques, of amyloid beta (A beta) peptide proteolytically derived from the amyloid precursor protein. Accumulation of these aggregates has manifestations in the later stages of the disease, such as memory loss and cognitive inabilities originating from the neuronal dysfunction, neurodegeneration, and brain atrophy. Treatment of this disease at the late stages is difficult, and many clinical trials have failed. Hence, the goal is to find means capable of preventing the aggregation of these intrinsically disordered proteins by inhibiting the early stages of their pathological transformations. Polyphenols are known to be neuroprotective agents with the noticeable potential against many neurodegenerative diseases, such as Alzheimer{\textquoteright}s, Parkinson{\textquoteright}s, and Prion diseases. Methods: We analyzed the capability of Baicalein to inhibit aggregation of human Tau protein by a multifactorial analysis that included several biophysical and biochemical techniques. Results: The potency of Baicalein, a polyphenol from the Scutellaria baicalensis Georgi, against in vitro Tau aggregation and PHF dissolution has been screened and validated. ThS fluorescence assay revealed the potent inhibitory activity of Baicalein, whereas ANS revealed its mechanism of Tau inhibition viz. by oligomer capture and dissociation. In addition, Baicalein dissolved the preformed mature fibrils of Tau thereby possessing a dual target action. Tau oligomers formed by Baicalein were non-toxic to neuronal cells, highlighting its role as a potent molecule to be screened against AD. Conclusion: In conclusion, Baicalein inhibits aggregation of hTau40 by enhancing the formation of SDS-stable oligomers and preventing fibril formation. Baicalein-induced oligomers do not affect the viability of the neuroblastoma cells. Therefore, Baicalein can be considered as a lead molecule against Tau pathology in AD.

}, keywords = {Alzheimer{\textquoteright}s disease, Baicalein, Tau dissolution, Tau inhibition, Tau Oligomers}, doi = {10.1186/s12964-021-00704-3}, author = {Sonawane, Shweta Kishor and Uversky, Vladimir N. and Chinnathambi, Subashchandrabose} } @article {47643, title = {C (1)-Symmetric diphosphorus ligands in metal-catalyzed asymmetric hydrogenation to prepare chiral compounds}, journal = {Organic \& Biomolecular Chemistry}, volume = {19}, year = {2021}, month = {NOV }, pages = {9095-9137}, type = {Review}, abstract = {Asymmetric hydrogenation has remained an important and challenging research area in industry as well as academia due to its high atom economy and ability to induce chirality. Among several types of ligands, chiral bidentate phosphine ligands have played a pivotal role in developing asymmetric hydrogenation. Although C-2-symmetric chiral bidentate phosphine ligands have dominated the field, it has been found that several C-1-symmetric ligands are equally effective and, in many cases, have outperformed their C-2-symmetric counterparts. This review evaluates the possibility of the use of C-1-symmetric diphosphorus ligands in asymmetric hydrogenation to produce chiral compounds. The recent strategies and advances in the application of C-1-symmetric diphosphorus ligands in the metal-catalyzed asymmetric hydrogenation of a variety of C=C bonds have been summarized. The potential of diphosphorus ligands in asymmetric hydrogenation to produce pharmaceutical intermediates, bioactive molecules, drug molecules, agrochemicals, and fragrances is discussed. Although asymmetric hydrogenation appears to be a problem that has been resolved, a deep dive into the recent literature reveals that there are several challenges that are yet to be addressed. The current asymmetric hydrogenation methods mostly employ precious metals, which are depleting at a fast pace. Therefore, scientific interventions to perform asymmetric hydrogenation using base metals or earth-abundant metals that can compete with established precious metals hold significant potential.}, issn = {1477-0520}, doi = {10.1039/d1ob01207j}, author = {Sen, Anirban and Chikkali, Samir H.} } @article {47369, title = {Characterization of a novel nanocomposite film based on functionalized chitosan-Pt-Fe3O4 hybrid nanoparticles}, journal = {Nanomaterials}, volume = {11}, year = {2021}, month = {MAY}, pages = {1275}, type = {Article}, abstract = {

The development of organic-inorganic hybrids or nanocomposite films is increasingly becoming attractive in light of their emerging applications. This research focuses on the formation of a unique nanocomposite film with enhanced elasticity suitable for many biomedical applications. The physical property measurement system and transmission electron microscopy were used to analyze Pt-Fe3O4 hybrid nanoparticles. These nanohybrids exhibited magnetic effects. They were further exploited to prepare the nanocomposite films in conjunction with a chitosan-g-glycolic acid organic fraction. The nanocomposite films were then examined using standard techniques: thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy, and atomic force microscopy. Tensile strength testing demonstrated a significantly greater elastic strength of these nanocomposite films than pure chitosan films. The water absorption behavior of the nanocomposites was evaluated by measuring swelling degree. These nanocomposites were observed to have substantially improved physical properties. Such novel nanocomposites can be extended to various biomedical applications, which include drug delivery and tissue engineering.

}, keywords = {Chitosan, nanocomposite films, Pt-Fe3O4 hybrid nanoparticles, tensile strength testing, Thermogravimetric analysis}, doi = {10.3390/nano11051275}, author = {Kumari, Sangeeta and Singh, Raj Pal and Chavan, Nayaku N. and Sahi, Shivendra V. and Sharma, Nilesh} } @article {47590, title = {Cloning and expression of antibody fragment (Fab) I: effect of expression construct and induction strategies on light and heavy chain gene expression}, journal = {Biochemical Engineering Journal}, volume = {176}, year = {2021}, month = {DEC}, pages = {108189}, type = {Article}, abstract = {Dual promoter expression constructs offer time and cost-effective alternatives to produce multi-domain proteins like antibody fragments. This investigation is focused on understanding the effect of expression construct (dual promoter vs. co-transformation strategy), codon optimization, and induction strategies on yield and expression stoichiometry of LC and HC genes of antibody fragment at shake-flask and bioreactor scale. rHu biosimilar Ranibizumab was selected as a model protein for the study. Expression stoichiometry of HC and LC gene at mRNA level was studied using RTqPCR, whereas protein expression level was studied quantitatively using RP-HPLC and SDS-PAGE analysis. In the case of dual promoter expression construct, it was observed that LC gene cloned in the MCS1 of the duet vectors has > 2-fold expression than the HC gene, cloned in the MCS2. Transcript abundance profile of the HC and LC genes determined at different time intervals post-induction shows a difference in the gene expression at the transcriptional level. Comparative analysis of dual promoter and co-transformation strategy shows better stoichiometry in co-transformation (1:1.3), whereas higher protein yield in a dual expression system (>2.4 fold). The use of lactose and galactose as inducers show higher Fab yield of 2.30 +/- 0.03 g/L and 2.81 +/- 0.06 g/L with expression stoichiometry of 1:1.9 and 1:2 (HC: LC) respectively than IPTG-based induction with a protein yield of 1.40 +/- 0.02 g/L.}, keywords = {Dual promoter vector, Expression stoichiometry, High cell density fermentation, rHu biosimilar Ranibizumab, Transcript abundance}, issn = {1369-703X}, doi = {10.1016/j.bej.2021.108189}, author = {Mehta, Deepa and Chirmade, Tejas and Tungekar, Aatir A. and Gani, Kayanat and Bhambure, Rahul} } @article {47462, title = {Conformational plasticity and dynamic interactions of the N-terminal domain of the chemokine receptor CXCR1}, journal = {Plos Computational Biology}, volume = {17}, year = {2021}, month = {MAY}, type = {Article}, abstract = {

The dynamic interactions between G protein-coupled receptors (GPCRs) and their cognate protein partners are central to several cell signaling pathways. For example, the association of CXC chemokine receptor 1 (CXCR1) with its cognate chemokine, interleukin-8 (IL8 or CXCL8) initiates pathways leading to neutrophil-mediated immune responses. The N-terminal domain of chemokine receptors confers ligand selectivity, but unfortunately the conformational dynamics of this intrinsically disordered region remains unresolved. In this work, we have explored the interaction of CXCR1 with IL8 by microsecond time scale coarse-grain simulations, complemented by atomistic models and NMR chemical shift predictions. We show that the conformational plasticity of the apo-receptor N-terminal domain is restricted upon ligand binding, driving it to an open C-shaped conformation. Importantly, we corroborated the dynamic complex sampled in our simulations against chemical shift perturbations reported by previous NMR studies and show that the trends are similar. Our results indicate that chemical shift perturbation is often not a reporter of residue contacts in such dynamic associations. We believe our results represent a step forward in devising a strategy to understand intrinsically disordered regions in GPCRs and how they acquire functionally important conformational ensembles in dynamic protein-protein interfaces.

}, doi = {10.1371/journal.pcbi.1008593}, author = {Kharche, Shalmali and Joshi, Manali and Chattopadhyay, Amitabha and Sengupta, Durba} } @article {47739, title = {Continuous citrate-capped gold nanoparticle synthesis in a two-phase flow reactor}, journal = {Journal of Flow Chemistry}, volume = {11}, year = {2021}, month = {SEP}, pages = {553-567}, type = {Article}, abstract = {A continuous manufacturing platform was developed for the synthesis of aqueous colloidal 10-20 nm gold nanoparticles (Au NPs) in a flow reactor using chloroauric acid, sodium citrate and citric acid at 95 degrees C and 2.3 bar(a) pressure. The use of a twophase flow system - using heptane as the continuous phase - prevented fouling on the reactor walls, while improving the residence time distribution. Continuous syntheses for up to 2 h demonstrated its potential application for continuous manufacturing, while live quality control was established using online UV-Vis photospectrometry that monitored the particle size and process yield. The synthesis was stable and reproducible over time for gold precursor concentration above 0.23 mM (after mixing), resulting in average particle size between 12 and 15 nm. A hydrophobic membrane separator provided successful separation of the aqueous and organic phases and collection of colloidal Au NPs in flow. Process yield increased at higher inlet flow rates (from 70\% to almost 100 \%), due to lower residence time of the colloidal solution in the separator resulting in less fouling in the PTFE membrane. This study addresses the challenges for the translation of the synthesis from batch to flow and provides tools for the development of a continuous manufacturing platform for gold nanoparticles.}, keywords = {Continuous manufacturing, Nanomaterials, Online analysis, phase separation, segmented flow}, issn = {2062-249X}, doi = {10.1007/s41981-021-00172-3}, author = {Damilos, Spyridon and Alissandratos, Ioannis and Panariello, Luca and Radhakrishnan, Anand N. P. and Cao, Enhong and Wu, Gaowei and Besenhard, Maximilian O. and Kulkarni, Amol A. and Makatsoris, Charalampos and Gavriilidis, Asterios} } @article {47039, title = {Controlled di-lithiation enabled synthesis of phosphine-sulfonamide ligands and implications in ethylene oligomerization}, journal = {Dalton Transactions}, volume = {50}, year = {2021}, month = {MAR }, pages = {3717-3723}, type = {Article}, abstract = {

Catalyst design for ethylene oligomerization has attracted significant interest. Herein, we report the synthesis of phosphine-sulfonamide-derived palladium complexes and examine their performance in ethylene oligomerization. Arresting a dilithiation intermediate of N-(2-bromophenyl)-4-methylbenzenesulfonamide (1) at -84 degrees C selectively produced N-(2-(bis(2-methoxyphenyl)phosphanyl)phenyl)-4-methylbenzenesulfonamide (L1A). However, the same reaction at -41 degrees C delivered a different ligand; 2-(bis(2-methoxyphenyl)phosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2A). The generality of our strategy has been demonstrated by preparing N-(2-(diphenylphosphanyl)phenyl)-4-methylbenzenesulfonamide (L1B) and 2-(diphenylphosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2B). Subsequently, L1A and L1B were treated with a palladium precursor to yield 5-membered complexes C1 and C2, respectively. In contrast, L2A upon treatment with palladium produced a 6-membered metal complex C3. Thus, a small library of 7 palladium complexes (C1-C7) were synthesized by varying the donor moiety (pyridine, DMSO, and acetonitrile). The identity of palladium complexes was unambiguously ascertained using a combination of spectroscopic and analytical methods, including single-crystal X-ray diffraction. The performance of the complexes C1-C7 was investigated in ethylene oligomerization and almost all of them were found to be active. The resultant ethylene oligomers were characterized using H-1 and C-13 NMR, MALDI-ToF-MS, and GPC. Detailed screening of reaction parameters revealed 100 degrees C and 40 bars ethylene to be optimal conditions. Complex C5 outperformed other complexes and produced ethylene oligomers with a molecular weight of 1000-1900 g mol(-1).

}, issn = {1477-9226}, doi = {10.1039/d1dt00093d}, author = {Mote, Nilesh R. and Gaikwad, Shahaji R. and Khopade, V, Kishor and Gonnade, Rajesh G. and Chikkali, Samir H.} } @article {46603, title = {Controlling draw resonance during extrusion film casting of nanoclay filled linear low-density polyethylene: an experimental study and numerical linear stability analysis}, journal = {Journal of Plastic Film \& Sheeting}, volume = {37}, year = {2021}, month = {JUL}, pages = {8756087920978443}, type = {Article}, abstract = {

Commercially important extrusion film casting (EFC) processes for manufacturing plastic films or sheets are hampered by several instabilities that severely limits their productivity. In this research we focussed on one important instability: the draw resonance that occurs during the EFC process mainly under extensional flow conditions. Draw resonance is the sustained periodic oscillations in the film dimensions, notably film width and thickness, when the process operates beyond a critical draw ratio (CDR). In this research our goal was to reduce this draw resonance instability by incorporating well dispersed nanoclay fillers in a base polymeric resin (such as a linear low density polyethylene - LLDPE) to determine how these nanocomposite (NC) formulations can prevent or reduce the draw resonance defect. EFC experiments were conducted on the base resin and on the NC formulations under non-isothermal conditions to determine the onset of the draw resonance experimentally. Conventional linear stability analysis was performed to determine the onset of the draw resonance defect numerically. Numerical predictions for the onset of draw resonance were in qualitative agreement with our experimental data. Our results showed that incorporating appropriate nanoclay concentrations in a base polymeric resin indeed enhanced the EFC process stability for those polymer formulations and thus can have important economic implications for processors.

}, keywords = {Draw resonance, extensional strain hardening, Extrusion, Film, hydrodynamic interactions, Nanoclay, Nanocomposites, Polyethylene, Rheology, stability}, issn = {8756-0879}, doi = {10.1177/8756087920978443}, author = {Rokade, Dhammaraj and Chougale, Sanket and Patil, Prashant and Bhattacharjee, Tanushree and Gawande, Dnyaneshwar and Pol, Harshawardhan and Dhadwal, Renu} } @article {47097, title = {Divergent approach to the synthesis of (-)-balanol heterocycle and cis-3-hydroxypipecolic acid based on chiral 2-aminoalkanol equivalent}, journal = {Tetrahedron}, volume = {80}, year = {2021}, month = {JAN}, pages = {131773}, type = {Article}, abstract = {

Enantioselective synthesis of the hexahydroazepine core of (-)-balanol and formal synthesis of cis-3hydroxypipecolic acid from a common intermediate have been accomplished by a divergent path. The common intermediate was accessed from a favorably protected enantiomerically pure 2-amino-1,3,4-butanetriol (ABT) equivalent via oxidation and Wittig olefination. The synthesis of (-)-balanol heterocycle featured tandem reduction/acetal-deprotection/gamma-lactonization reaction and a one-pot azide reduction followed by seven membered aza-heterocycle formation while the route to cis-3-hydroxypipecolic acid highlighted the base induced piperidine ring formation and regioselective benzylidine-acetal cleavage. (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {Amino-alcohol, desymmetrization, Hexahydroazepine, Piperidine alkaloids, Protein kinase}, issn = {0040-4020}, doi = {10.1016/j.tet.2020.131773}, author = {Chavan, Subhash P. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {46895, title = {Eichhornia crassipes mediated bioinspired synthesis of crystalline nano silver as an integrated medicinal material: a waste to value approach}, journal = {Journal of Cluster Science}, volume = {32}, year = {2021}, month = {MAR}, pages = {391-404}, type = {Article}, abstract = {

The present study deals with the synthesis of silver nanoparticles from Eichhornia crassipes. Dynamic light scattering (DLS), Transmission electron microscopy (TEM), UV-Vis spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were performed for nanoparticle characterization. The aqueous plant extract of Eichhornia crassipes was phytochemically analyzed for phenol, flavonoid, reducing sugar content, alkaloids, saponins and carotenoids. The synthesized particles after optimization of important parameters have an average diameter of 12.48 +/- 3.43 nm with a spherical morphology and zeta potential of - 31.53 mV. At 100 mu g/ml of nanoparticle concentration, the antioxidant activity of 93.6\% was observed. MIC (Minimum inhibitory concentration) values exhibiting the antimicrobial attributes reported an estimated value of 7.8 mu g/ml for gram-negative and higher values of 31.25 and 250 mu g/ml for gram-positive bacteria. The antibiofilm assay showed 86.89\% and 74.7\% of the reduction in violacein synthesis and biofilm inhibition respectively at 15 mu g/ml nanoparticle concentration. The anticancer assay reported the IC50 (Inhibitory concentration) values of 13.32, 14.71 and 19.91 mu g/ml for HeLa, HCT 116 and L6 cell lines respectively. Thus the study establishes a significant integrative treatment to combat secondary infections in cancer patients. Graphic

}, keywords = {antibacterial activity, Antibiofilm activity, Anticancer activity, Antioxidant activity, Eichhornia crassipes, silver nanoparticles}, issn = {1040-7278}, doi = {10.1007/s10876-020-01797-5, Early Access Date = APR 2020}, author = {Moudgil, Aliesha and Deval, Animesh S. and Dharne, Mahesh S. and Sarkar, Dhiman M. and Choudhari, Amit S. and Chaudhari, Bhushan P.} } @article {47408, title = {Enantioselective reduction of ketones and synthesis of 2-methyl-2,3-dihydro-1-benzofuran catalyzed by chiral spiroborate ester}, journal = {Russian Journal of Organic Chemistry}, volume = {57}, year = {2021}, month = {APR}, pages = {611-618}, type = {Article}, abstract = {

Asymmetric reduction of homobenzylic ketones was achieved through the use of chiral spiroborate ester catalyst. The catalyst is applicable for both analytical and industrial purposes since it is not sensitive to air and moisture. A rapid synthetic route has been developed for the preparation of (S)-2-methyl-2,3-dihydro-1-benzofuran via enantioselective reduction of homobenzylic ketone in the presence of a chiral spiroborate catalyst as the key step.

}, keywords = {2-methyl-2, 3-dihydro-1-benzofuran, asymmetric reduction, spiroborate ester}, issn = {1070-4280}, doi = {10.1134/S1070428021040163}, author = {Patil, H. S. and Nikalje, M. D. and Chopade, A. U. and Chopade, M. U.} } @article {47822, title = {Epigallocatechin-3-gallate modulates tau post-translational modifications and cytoskeletal network}, journal = {Oncotarget}, volume = {12}, year = {2021}, month = {MAY}, pages = {1083 - 1099}, type = {Article}, abstract = {BACKGROUND: Alzheimer{\textquoteright}s disease is a type of dementia denoted by progressive neuronal death due to the accumulation of proteinaceous aggregates of Tau. Post-translational modifications like hyperphosphorylation, truncation, glycation, etc. play a pivotal role in Tau pathogenesis. Glycation of Tau aids in paired helical filament formation and abates its microtubule-binding function. The chemical modulators of Tau PTMs, such as kinase inhibitors and antibody-based therapeutics, have been developed, but natural compounds, as modulators of Tau PTMs are not much explored. MATERIALS AND METHODS: We applied biophysical and biochemical techniques like fluorescence kinetics, oligomerization analysis and transmission electron microscopy to investigate the impact of EGCG on Tau glycation in vitro. The effect of glycation on cytoskeleton instability and its EGCG-mediated rescue were studied by immunofluorescence microscopy in neuroblastoma cells. RESULTS: EGCG inhibited methyl glyoxal (MG)-induced Tau glycation in vitro. EGCG potently inhibited MG-induced advanced glycation endproducts formation in neuroblastoma cells as well modulated the localization of AT100 phosphorylated Tau in the cells. In addition to preventing the glycation, EGCG enhanced actin-rich neuritic extensions and rescued actin and tubulin cytoskeleton severely disrupted by MG. EGCG maintained the integrity of the Microtubule Organizing Center (MTOC) stabilized microtubules by Microtubule-associated protein RP/EB family member 1 (EB1). CONCLUSIONS: We report EGCG, a green tea polyphenol, as a modulator of in vitro methylglyoxal-induced Tau glycation and its impact on reducing advanced glycation end products in neuroblastoma cells. We unravel unprecedented function of EGCG in remodeling neuronal cytoskeletal integrity.}, keywords = {Alzheimer{\textquoteright}s disease, tau glycation, Tau glycation inhibition, tau protein, Tau PTMs}, isbn = {1949-2553}, doi = {10.18632/oncotarget.27963}, author = {Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose} } @article {47059, title = {Exploring edge functionalised blue phosphorene nanoribbons as novel photocatalysts for water splitting}, journal = {New Journal of Chemistry}, volume = {45}, year = {2021}, month = {FEB}, pages = {3570-3580}, type = {Article}, abstract = {

Hydrogen gas, a highly combustible and eco-friendly fuel is stealing the limelight and its production is one of the major areas of research. An efficient and green method for producing clean hydrogen gas with no harmful by-product is water splitting. With the introduction of low dimensional materials, water splitting has become an easier and cost-effective process. The present work demonstrates the application of one such low dimensional material viz., edge functionalised Blue Phosphorene Nano-Ribbons (BPNRs) as potential photocatalysts. With a carrier mobility of 10(3) cm(2) V-1 s(-1) and a band gap of 1.5-3.0 eV, BPNRs are an attractive candidate for photocatalysis. BPNRs with different edge oreintations, viz. zigzag and armchair are functionalised with CH3O, COOCH3, CHO, COOH, OH, NH2, CONH2, SH, C6H5, and NO2 groups. Their performance towards activating water molecules at different sites on the nanoribbon is studied. The functionalised edges of the BPNRs are the active sites showing similar to 1.2\% to 3.2\% efficiency in activating the O-H bond of the water molecule. Among the different groups explored, CONH2 functionalised zigzag BPNR clearly exhibits a higher potential towards the adsorption of water molecules (-0.98 eV) and activation of O-H bonds with an elongation of 3.2\% and a red shift of 500.6 cm(-1). This is attributed to the lone pair of electrons on the nitrogen atom contributing to the electron donating nature of the CONH2 functional group.

}, issn = {1144-0546}, doi = {10.1039/d0nj03950k}, author = {Maibam, Ashakiran and Chakraborty, Debalina and Joshi, Krati and Krishnamurty, Sailaja} } @article {47371, title = {Extracellular HDAC6 ZnF UBP domain modulates the actin network and post-translational modifications of Tau}, journal = {Cell Communication and Signaling}, volume = {19}, year = {2021}, month = {MAY }, pages = {49}, type = {Article}, abstract = {

Background: Microtubule-associated protein Tau undergoes aggregation in Alzheimer{\textquoteleft}s disease (AD) and a group of other related diseases collectively known as Tauopathies. In AD, Tau forms aggregates, which are deposited intracellularly as neurofibrillary tangles. Histone deacetylase-6 (HDAC6) plays an important role in aggresome formation, where it recruits polyubiquitinated aggregates to the motor protein dynein. Methods: Here, we have studied the effects of HDAC6 ZnF UBP on Tau phosphorylation, ApoE localization, GSK-3 beta regulation and cytoskeletal organization in neuronal cells by immunocytochemical analysis. This analysis reveals that the cell exposure to the UBP-type zinc finger domain of HDAC6 (HDAC6 ZnF UBP) can modulate Tau phosphorylation and actin cytoskeleton organization. Results: HDAC6 ZnF UBP treatment to cells did not affect their viability and resulted in enhanced neurite extension and formation of structures similar to podosomes, lamellipodia and podonuts suggesting the role of this domain in actin re-organization. Also, HDAC6 ZnF UBP treatment caused increase in nuclear localization of ApoE and tubulin localization in microtubule organizing centre (MTOC). Therefore, our studies suggest the regulatory role of this domain in different aspects of neurodegenerative diseases. Upon HDAC6 ZnF UBP treatment, inactive phosphorylated form of GSK-3 beta increases without any change in total GSK-3 beta level. Conclusions: HDAC6 ZnF UBP was found to be involved in cytoskeletal re-organization by modulating actin dynamics and tubulin localization. Overall, our study suggests that ZnF domain of HDAC6 performs various regulatory functions apart from its classical function in aggresome formation in protein misfolding diseases.

}, keywords = {Actin, Cytoskeleton, HDAC6, Microtubule, neurodegeneration, Phosphorylation, Podonut, Podosomes, Tau, Tauopathies}, doi = {10.1186/s12964-021-00736-9}, author = {Balmik, Abhishek Ankur and Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose} } @article {47694, title = {FnCas9-based CRISPR diagnostic for rapid and accurate detection of major SARS-CoV-2 variants on a paper strip}, journal = {eLife}, volume = {10}, year = {2021}, month = {JUN }, pages = {e67130}, type = {Article}, abstract = {The COVID-19 pandemic originating in the Wuhan province of China in late 2019 has impacted global health, causing increased mortality among elderly patients and individuals with comorbid conditions. During the passage of the virus through affected populations, it has undergone mutations, some of which have recently been linked with increased viral load and prognostic complexities. Several of these variants are point mutations that are difficult to diagnose using the gold standard quantitative real-time PCR (qRT-PCR) method and necessitates widespread sequencing which is expensive, has long turn-around times, and requires high viral load for calling mutations accurately. Here, we repurpose the high specificity of Francisella novicida Cas9 (FnCas9) to identify mismatches in the target for developing a lateral flow assay that can be successfully adapted for the simultaneous detection of SARS-CoV-2 infection as well as for detecting point mutations in the sequence of the virus obtained from patient samples. We report the detection of the S gene mutation N501Y (present across multiple variant lineages of SARS-CoV-2) within an hour using lateral flow paper strip chemistry. The results were corroborated using deep sequencing on multiple wild-type (n = 37) and mutant (n = 22) virus infected patient samples with a sensitivity of 87\% and specificity of 97\%. The design principle can be rapidly adapted for other mutations (as shown also for E484K and T716I) highlighting the advantages of quick optimization and roll-out of CRISPR diagnostics (CRISPRDx) for disease surveillance even beyond COVID-19. This study was funded by Council for Scientific and Industrial Research, India.}, issn = {2050-084X}, doi = {10.7554/eLife.67130}, author = {Kumar, Manoj and Gulati, Sneha and Ansari, Asgar H. and Phutela, Rhythm and Acharya, Sundaram and Azhar, Mohd and Murthy, Jayaram and Kathpalia, Poorti and Kanakan, Akshay and Maurya, Ranjeet and Vasudevan, Janani Srinivasa and Aparna, S. and Pandey, Rajesh and Maiti, Souvik and Chakraborty, Debojyoti} } @article {47664, title = {Formal synthesis of (-)-quinagolide: diastereoselective ring expansion via a bicyclic aziridinium ion strategy to access the octahydrobenzo[g]quinoline architecture}, journal = {Journal of Organic Chemistry}, volume = {86}, year = {2021}, month = {JUL }, pages = {9344-9352}, type = {Article}, abstract = {The diastereoselective formal synthesis of (-)-quinagolide, a D-2 receptor agonist, has been achieved. The synthesis started from L-pyroglutamic acid and relied on utilization of (a) a stereospecific catalytic hydrogenation and diastereoselective Horner-Emmons-Michael cascade to obtain functionalized prolinate, (b) a Lewis acid mediated Pummerer cyclization to construct a tricyclic fused ring system, and (c) a diastereoselective ring expansion via a bicyclic aziridinium intermediate to access the required 3-substituted piperidine scaffold.}, issn = {0022-3263}, doi = {10.1021/acs.joc.1c00603}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Pisal, Mahesh M. and Kadam, Appasaheb L. and Gonnade, Rajesh G.} } @article {47630, title = {Heterogeneous C-H functionalization in water via porous covalent organic framework nanofilms: a case of catalytic sphere transmutation}, journal = {Journal of the American Chemical Society}, volume = {143}, year = {2021}, month = {JUN }, pages = {8426-8436}, type = {Article}, abstract = {Heterogeneous catalysis in water has not been explored beyond certain advantages such as recyclability and recovery of the catalysts from the reaction medium. Moreover, poor yield, extremely low selectivity, and active catalytic site deactivation further underrate the heterogeneous catalysis in water. Considering these facts, we have designed and synthesized solution-dispersible porous covalent organic framework (COF) nanospheres. We have used their distinctive morphology and dispersibility to functionalize unactivated C-H bonds of alkanes heterogeneously with high catalytic yield (42-99\%) and enhanced regioand stereoselectivity (3 degrees:2 degrees = 105:1 for adamantane). Further, the fabrication of catalyst-immobilized COF nanofilms via covalent self-assembly of catalytic COF nanospheres for the first time has become the key toward converting the catalytically inactive homogeneous catalysts into active and effective heterogeneous catalysts operating in water. This unique covalent self-assembly occurs through the protrusion of the fibers at the interface of two nanospheres, transmuting the catalytic spheres into films without any leaching of catalyst molecules. The catalyst-immobilized porous COF nanofilms{\textquoteright} chemical functionality and hydrophobic environment stabilize the high-valent transient active oxoiron(V) intermediate in water and restricts the active catalytic site{\textquoteright}s deactivation. These COF nanofilms functionalize the unactivated C-H bonds in water with a high catalytic yield (45-99\%) and with a high degree of selectivity (cis:trans = 155:1; 3 degrees:2 degrees = 257:1, for cis-1,2-dimethylcyclohexane). To establish this approach{\textquoteright}s {\textquoteleft}{\textquoteleft}practical implementation{\textquoteright}{\textquoteright}, we conducted the catalysis inflow (TON = 424 +/- 5) using catalyst-immobilized COF nanofilms fabricated on a macroporous polymeric support.}, issn = {0002-7863}, doi = {10.1021/jacs.1c02425}, author = {Sasmal, Himadri Sekhar and Bag, Saikat and Chandra, Bittu and Majumder, Poulami and Kuiry, Himangshu and Karak, Suvendu and Sen Gupta, Sayam and Banerjee, Rahul} } @article {47313, title = {Heterogeneous nucleation in citrate synthesis of AgNPs: effect of mixing and solvation dynamics}, journal = {Chemical Engineering Journal}, volume = {421}, year = {2021}, month = {OCT}, type = {Article}, abstract = {

The heterogeneity issues in silver nanoparticle nucleation (Lee-Meisel route) have been investigated. The final polydispersity and sphericity of the nanoparticles in the Lee-Meisel scheme are shown to depend upon the early time dynamics of silver-citrate complexation. The formation of macromolecular intermediary complexes in the early stages of the reaction is visualized based on online DLS data, TEM analysis, and the mass balances of silver and citrate ions. The reversible complexation between citrate ions and silver citrate is shown to be the limiting step that governs the directional growth of the nanoparticles. The dynamics of the complexation of citrate are seen to form a very rapid step and intense mixing was required for the complexation to happen uniformly across the reaction. This specific observation is also confirmed from the MD simulations. Thus, to get particles of high sphericity, irrespective of the reaction concentration, temperature, or reactor geometry, the mixing time should be \<4\ s and\ Da\ ~\ 0.1. Optimal mixing conditions for isotropic growth are suggested based on the reaction kinetics and are also demonstrated with experimental evidence.

}, doi = {10.1016/j.cej.2020.127753}, author = {Deshpande, J. B. and Chakrabarty, S. and Kulkarni, A. A.} } @article {47437, title = {Ice-colloidal templated carbon host for highly efficient, dendrite free Li metal anode}, journal = {Carbon}, volume = {179}, year = {2021}, month = {JUL}, pages = {256-265}, type = {Article}, abstract = {

With its high theoretical specific capacity value, lithium metal itself would be an ideal anode material for rechargeable Li-ion batteries (LIBs). However, practical application of lithium metal is obstructed due to lithium dendrite growth during cycling leads to unstable SEI formation, volume fluctuation and safety hazard. Herein, we have developed a novel high surface area carbon network with both meso (\~{}20 nm) and micron (\~{}1{\textendash}2 μm) size porosity, via ice-colloidal templating, as a scaffold for stable lithium metal anode mitigating lithium dendrite formation. The 3D porous nitrogen doped carbon (3D PNC) network is capable of lithium deposition equivalent to 10 mAhcm-2 at 2 mAcm-2 current density with 99.96\% coulombic efficiency for 100 cycles. Moreover, 3D PNC when subjected to 3000 h of continuous plating-stripping measurements (\~{}700 cycles) depicts the coulombic efficiency of 99.84\% with no observable dendrite growth at the current density of 2 mAcm-2 and lithium intake capacity of 5 mAhcm-2. A full cell of lithium plated 3D PNC anode with LiFePO4 shows an excellently stable performance up to 50 cycles at an input current density of 50 mAg-1, with a coulombic efficiency retention of 99.73\%.

}, doi = {10.1016/j.carbon.2021.04.021}, author = {Patrike, Apurva and Kaniyamparambil, Karthika and Wahid, Malik and Chaturvedi, Vikash and Shelke, Manjusha} } @article {47355, title = {Imidazole/4,4 {\textquoteleft}-azopyridine bridging binuclear Ru(II) complexes: design, synthesis, bimolecular interactions and cytotoxicity against HeLa cell line}, journal = {Journal of the Iranian Chemical Society}, volume = {18}, year = {2021}, month = {DEC}, type = {Article}, abstract = {

Binuclear Ru(II)-arene complexes [(eta(6)-pcym)(Flq)Ru(mu-im/mu-azpy)Ru(Flq)(eta(6)-p-cym)]Cl (C1-C8) (cym = cymene; Flq = fluoroquinolones; im = imidazole; azpy = 4,4 {\textquoteleft} azo pyridine) have been synthesized and characterized by elemental analysis, molar conductivity and various spectral techniques (ESI-MS, IR, UV-Vis and H-1-NMR). The geometry of the complexes was optimized by DFT calculations, which revealed a pseudo-octahedral coordination around each metal centre. Binding of the synthesized complexes with CT-DNA and BSA was studied spectroscopically, and it has been established that the presence of two hydrophobic planar arene moieties enhances the binding efficacies of the binuclear complexes to the macromolecules, compared to their mononuclear analogues. The results of competitive binding between C1-C8 and ethidium bromide (EB) towards DNA have shown that the complexes are able to displace EB from DNA-EB adduct and interact with DNA via intercalation. The complexes display cytotoxicity against the HeLa human cervical cancer cell lines with IC50 values in the range of 30.1-120.9 mu M.

}, keywords = {Binuclear ruthenium (II) complexes, BSA binding interactions, DFT calculations, DNA, Fluoroquinolones (FQs), HeLa human cervical carcinoma}, issn = {1735-207X}, doi = {10.1007/s13738-021-02271-3, Early Access Date = MAY 2021}, author = {Khanvilkar, Priyanka and Dash, Soumya R. and Pulipaka, Ramadevi and Shirsath, Kavita and Devkar, Ranjitsinh and Chakraborty, Debjani} } @article {47601, title = {Implications of valosin-containing protein in promoting autophagy to prevent tau aggregation}, journal = {Neuroscience}, volume = {476}, year = {2021}, month = {NOV}, pages = {125-134}, type = {Review}, abstract = {and cellular degradative mechanisms modulate Tau aggregation. During aging and neu-rodegenerative disorders, the cellular proteostasis is disturbed due to impaired protective mechanisms. This results in accumulation of aberrant Tau aggregates in the neuron that leads to microtubule destabilization and neuronal degeneration. The intricate mechanisms to prevent Tau aggregation involve chaperones, autophagy, and proteasomal system have gained main focus about concerning to therapeutic intervention. However, the thor-ough understanding of other key proteins, such as Valosin-containing protein (VCP), is limited. In various neu-rodegenerative diseases, the chaperone-like activity of VCP is involved in preventing protein aggregation and mediating the degradation of aberrant proteins by proteasome and autophagy. In the case of Tau aggregation associated with Alzheimer{\textquoteright}s disease, the importance of VCP is poorly understood. VCP is known to co-localize with Tau, and alterations in VCP cause aberrant accumulation of Tau. Nevertheless, the direct mechanism of VCP in altering Tau aggregation is not known. Hence, we speculate that VCP might be one of the key modulators in preventing Tau aggregation and can disintegrate Tau aggregates by directing its clearance by autophagy. = 2021 IBRO. Published by Elsevier Ltd. All rights reserved.}, keywords = {Autophagy, segregase, Tau aggregates, Ubiquitin-proteasome system, valosin-containing protein}, issn = {0306-4522}, doi = {10.1016/j.neuroscience.2021.09.003}, author = {Chinnathambi, Subashchandrabose and Gorantla, Nalini Vijay} } @article {47125, title = {In silico studies, synthesis and antitubercular activity of some novel quinoline - azitidinone derivatives}, journal = {Current Computer-Aided Drug Design}, volume = {17}, year = {2021}, month = {JAN}, pages = {134-143}, type = {Article}, abstract = {

Background: Diarylquinolines like Bedaquiline have shown promising antitubercular activity by their action of Mycobacterial ATPase. Objective: The structural features necessary for a good antitubercular activity for a series of quinoline derivatives were explored through computational chemistry tools like QSAR and combinatorial library generation. In the current study, 3-Chloro-4-(2-mercaptoquinoline-3-yl)-1-substitutedphenylazitidin-2-one derivatives have been designed and synthesized based on molecular modeling studies as anti-tubercular agents. Methods: 2D and 3D QSAR analyses were used to designed compounds having a quinoline scaffold. The synthesized compounds were evaluated against active and dormant strains of Mycobacterium tuberculosis (MTB) H37 Ra and Mycobacterium bovis BCG. The compounds were also tested for cytotoxicity against MCF-7, A549 and Panc-1 cell lines using MTT assay. The binding affinity of designed compounds was gauged by molecular docking studies. Results: Statistically significant QSAR models generated by the SA-MLR method for 2D QSAR exhibited r(2) = 0.852, q(2) = 0.811, whereas 3D QSAR with SA-kNN showed q(2) = 0.77. The synthesized compounds exhibited MIC in the range of 1.38-14.59(mu g/ml). These compounds showed some crucial interaction with MTB ATPase. Conclusion: The present study has shown some promising results which can be further explored for lead generation.

}, keywords = {combilib, Molecular docking, mycobacterial ATPase, QSAR, Quinoline}, issn = {1573-4099}, doi = {10.2174/1573409916666200129095952}, author = {Chitre, Trupti S. and Asgaonkar, Kalyani D. and Vikhe, Amrut B. and Patil, Shital M. and Garud, Dinesh R. and Khedkar, Vijay M. and Sarkar, Dhiman and Nawale, Laxman U. and Yeware, Amar} } @article {47445, title = {Influence of sodium caseinate, maltodextrin, pectin and their Maillard conjugate on the stability, in vitro release, anti-oxidant property and cell viability of eugenol-olive oil nanoemulsions}, journal = {International Journal of Biological Macromolecules}, volume = {183}, year = {2021}, month = {JUL}, pages = {158-170}, type = {Article}, abstract = {

The influence of protein (sodium caseinate-SC), polysaccharide (maltodextrin-MD; pectin-PC) and their Maillard conjugates (sodium caseinate maltodextrin conjugate-SCMDC; sodium caseinate pectin conjugate-SCPCC) were studied on the physico-chemical and biological properties of eugenol nanoemulsions/powder. The chemical composition was optimized using Taguchi design. The particles size of eugenol nanoemulsions with SC, MD, PC, SCMDC and SCPCC were 104.6, 323.5, 1872, 181.7, and 454.4 nm, respectively while their zeta potentials were -31.2, -28.5, -21.4, -40.1 and -25.1 mV, respectively. Turbidity studies revealed higher stability of nanoemulsion prepared with Maillard conjugate (SCMDC) compared to protein or polysaccharides alone. The dispersion of SCMDC eugenol nanoparticles in buffer was prepared to study its stability at different pH (3.0, 5.0, and 7.0) and temperature (4{\textdegree}, 37{\textdegree}, 60 {\textdegree}C) range. In-vitro enzymatic release study showed 31 and 74\% release of eugenol after 6 h at pH 2.4 and 7.4, respectively. In vitro antioxidant capacity of SCMDC encapsulated eugenol was higher than native eugenol, as demonstrated by free radical scavenging assays. In comparison to native eugenol, E:SCMDC eugenol showed reduced toxicity. These findings suggested that nanoencapsulated eugenol (E:SCMDC) have a huge potential in nutraceutical and therapeutic applications.

}, doi = {10.1016/j.ijbiomac.2021.04.122}, author = {Nagaraju, Pramod G. and Sindhu, P. and Dubey, Tushar and Chinnathambi, Subashchandrabose and Priyadarshini, Poornima and Rao, Pooja J.} } @article {47107, title = {Insertion copolymerization of functional olefins: Quo Vadis?}, journal = {European Polymer Journal}, volume = {143}, year = {2021}, month = {JAN }, pages = {110183}, type = {Article}, abstract = {

Functional polyethylene is a specialty polymer with unique set of properties and caters to a niche market. Currently, it is manufactured using high-pressure, high-temperature radical polymerization, or post-reactor (indirect) modification methods. Insertion copolymerization of functional olefins with ethylene provides a low pressure, direct route to prepare functional polyethylenes. However, insertion copolymerization of functional olefins with ethylene poses several impediments and requires special considerations. This review presents the current strategies, examines the progress, and attempts to gauge the commercial potential of direct synthesis of functional polyethylene. The performance of late transition metal catalysts derived from a-diimine, imine-phenolate, phosphine-sulfonate, bis-phosphine-mono-oxide, carbene-phenolate, phosphine-phenolate and their derivatives in the insertion copolymerization of functional olefins with ethylene is evaluated. While catalyst designing is crucial, incorporation of polar olefins that can serve an additional purpose is equally important. Therefore, we have organized the review in the following sections, polar alkenes with- acrylates, acrylic acids, acetates, nitriles, ethers, halides, two functional groups, cross-linking groups, dynamic interactions/self-healing properties, additional function/purpose, renewable functional olefins, and examine the progress. Among these, acrylates have been most intensively investigated and have been successfully incorporated in the polyethylene main-chain. Ethylene, methyl acrylate copolymers prepared by direct copolymerization reveal comparable melting temperature to that of LLDPE (at similar co-monomer content) and unfold the commercial potential of these materials. Recent developments on the insertion copolymerization of renewable functional olefins and di-functional olefins have elicited significant interest. This strategy is being viewed as a means of reducing environmental impact and enabling high functional group density at the same extent of incorporation. The overview thus offers a succinct account of insertion copolymerization of functional olefins, sheds light on the copolymer microstructure/material properties, and initiates a discussion on the commercial potential of functional polyethylene.

}, keywords = {Catalyst, Functional polyethylene, functional polyolefins, Hydrophilic polyethylene, insertion copolymerization, Polyethylene}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2020.110183}, author = {Birajdar, Rajkumar S. and Chikkali, Samir H.} } @article {47390, title = {Insights from a pan India Sero-epidemiological survey (Phenome-India Cohort) for SARS-CoV2}, journal = {eLife}, volume = {10}, year = {2021}, month = {APR }, pages = {e66537}, type = {Article}, abstract = {

To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14\%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95\% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10\% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95\% confidence interval, p value: 2.23, 1.92-2.59, \<0.0001), use of public transport (1.79, 1.43-2.24, \<0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, \<0.0001), and B blood group (1.36, 1.15-1.61, 0.001).

}, issn = {2050-084X}, doi = {10.7554/eLife.66537}, author = {Naushin, Salwa and Sardana, Viren and Ujjainiya, Rajat and Bhatheja, Nitin and Kutum, Rintu and Bhaskar, Akash Kumar and Pradhan, Shalini and Prakash, Satyartha and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Chandak, Giriraj Ratan and Lahiri, Amit and Kar, Susanta and Mulay, Shrikant Ramesh and Mugale, Madhav Nilakanth and Srivastava, Mrigank and Khan, Shaziya and Srivastava, Anjali and Tomar, Bhawana and Veerapandian, Murugan and Venkatachalam, Ganesh and Vijayakumar, Selvamani Raja and Agarwal, Ajay and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Sundaram, Gopinath M. and Veeranna, Ravindra P. and Pal, Anirban and Agarwal, Vinay Kumar and Maurya, Anil Ku and Singh, Ranvijay Kumar and Raman, Ashok Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Venkatesan, Subramanian and Sardana, Harish Kumar and Kothari, Anamika and Jain, Rishabh and Thakur, Anupama and Parihar, Devendra Singh and Saifi, Anas and Kaur, Jasleen and Kumar, Virendra and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Singh, Praveen and Chakraborty, Rahul and Chaturvedi, Gaura and Karunakar, Pinreddy and Yadav, Rohit and Singhmar, Sunanda and Singh, Dayanidhi and Sarkar, Sharmistha and Bhattacharya, Purbasha and Acharya, Sundaram and Singh, Vandana and Verma, Shweta and Soni, Drishti and Seth, Surabhi and Vashisht, Sakshi and Thakran, Sarita and Fatima, Firdaus and Singh, Akash Pratap and Sharma, Akanksha and Sharma, Babita and Subramanian, Manikandan and Padwad, Yogendra S. and Hallan, Vipin and Patial, Vikram and Singh, Damanpreet and Tripude, Narendra Vijay and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sarkar, Jit and Ramakrishna, Sistla and Kumar, Balthu Narender and Kumar, Kiran A. and Gandhi, Sumit G. and Jamwal, Piyush Singh and Chouhan, Rekha and Jamwal, Vijay Lakshmi and Kapoor, Nitika and Ghosh, Debashish and Thakkar, Ghanshyam and Subudhi, Umakanta and Sen, Pradip and Chaudhury, Saumya Ray and Kumar, Rashmi and Gupta, Pawan and Tuli, Amit and Sharma, Deepak and Ringe, Rajesh P. and Amarnarayan, D. and Kulkarni, Mahesh and Shanmugam, Dhansekaran and Dharne, Mahesh S. and Dastager, Sayed G. and Joshi, Rakesh and Patil, Amita P. and Mahajan, Sachin N. and Khan, Abujunaid Habib and Wagh, Vasudev and Yadav, Rakesh Kumar and Khilari, Ajinkya and Bhadange, Mayuri and Chaurasiya, Arvindkumar H. and Kulsange, Shabda E. and Khairnar, Krishna and Paranjape, Shilpa and Kalita, Jatin and Sastry, Narahari G. and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, Ravi Kumar and Babu, Elapavalooru Vssk and Sukumaran, Rajeev and Nair, Aiswarya R. and Valappil, Prajeesh Kooloth and Puthiyamadam, Anoop and Velayudhanpillai, Adarsh and Chodankar, Kalpana and Damare, Samir and Madhavi, Yennapu and Aggarwal, Ved Varun and Dahiya, Sumit and Agrawal, Anurag and Dash, Debasis and Sengupta, Shantanu} } @article {47587, title = {Intramolecularly double-donor-stabilized stannylene and its coordination towards Ag(I) and Au(I) centers}, journal = {Chemistry-An Asian Journal}, volume = {16}, year = {2021}, month = {AUG }, pages = {2118-2125}, type = {Article}, abstract = {The intramolecularly double-donor-stabilized stannylene 1 has been synthesized from the salt-metathesis reaction between two equivalents of lithium pyridine ene-amide L1 and SnCl2. Compound 1 exhibits dipolar behavior when reacted with B(C6F5)(3) leading to the zwitterionic compound 2. The reaction of 1 with one equivalent and 0.5 equivalent of AgOTf (OTf=trifluoromethane sulfonate) result in the formation of a stannylene-AgOTf complex 3 and a homoleptic distannylene-silver ionic complex 4, respectively. Analogous to complex 4, the gold(I) complex 5 has been synthesized from the reaction between two equivalents of 1 and 0.5 equivalent of AuCl.SMe2/Me3SiOTf. Complex 5 is the first example of homoleptic stannylene-Au(I) ionic complex among the very scarce reports on stannylene-gold(I) coordination complexes. All compounds have been structurally characterized using single crystal X-ray crystallography. Solution-state characterization have been performed using multinuclear NMR techniques. Detailed DFT calculations on the optimized geometries 1 o, 3 o-5 o reveal the change in sp- hybridization on the pyramidal Sn(II) center upon metal coordination and their bonding overlaps.}, keywords = {coordination, gold cation, hybridization, intramolecular donor, stannylene}, issn = {1861-4728}, doi = {10.1002/asia.202100523}, author = {Chibde, Purva and Raut, Ravindra K. and Kumar, Vikas and Deb, Rahul and Gonnade, Rajesh and Majumdar, Moumita} } @article {47652, title = {Iron catalyzed tandem ring opening/1,6-conjugate addition of cyclopropanols with p-quinone methides: new access to gamma,gamma-diaryl ketones}, journal = {Chemical Communications}, volume = {57}, year = {2021}, month = {DEC }, pages = {13582-13585}, type = {Article}, abstract = {An iron(iii) catalyzed tandem ring opening/1,6-conjugate addition of cyclopropanols to p-quinone methides leading to gamma,gamma-diaryl ketones has been described. This catalytic protocol provides a novel and efficient method to access gamma,gamma-diaryl ketone derivatives in good to excellent yields with high functional group tolerance. Importantly, gamma,gamma-diaryl ketone can be further functionalized to give a versatile set of useful products.}, issn = {1359-7345}, doi = {10.1039/d1cc05997a}, author = {Shirsath, Sachin R. and Chandgude, Sagar M. and Muthukrishnan, M.} } @article {47033, title = {Limonoid biosynthesis 3: functional characterization of crucial genes involved in neem limonoid biosynthesis}, journal = {Phytochemistry}, volume = {184}, year = {2021}, month = {APR}, pages = {112669}, type = {Article}, abstract = {

Neem (Azadirachta indica L.) is well known for its medicinal, agricultural, and pesticidal applications since ages. The secondary metabolites, limonoids, confer these biological properties, wherein over 150 different limonoids have been reported from neem. To understand limonoid biosynthesis, we analyzed tissue-specific (kernel, pericarp, leaves, and flower) transcriptome that resulted in the identification of one farnesyl diphosphate synthase (AiFDS), one squalene synthase (AiSQS), three squalene epoxidases (AiSQE1, AiSQE2, and AiSQE3), two triterpene synthases (AiTTS1 and AiTTS2), cycloartenol synthase (AiCAS), two cytochrome P450 reductases, and ten cytochrome P450 systems. Comparative tissue-expression analysis indicated that AiFDS, AiSQS, AiSQE3, and AiTTS1 are expressed higher in the kernel than in the other tissues. Heterologously expressed recombinant AiTTS1 produced tirucalla-7,24-dien-3 beta-ol as the sole product. Expression profile data, phylogeny with triterpene synthases from Meliaceae and Rutaceae families, real-time PCR of different tissues, and transient transformation revealed the involvement of tirucalla-7,24-dien-3 beta-ol synthase (AiTTS1) in limonoid biosynthesis. Further, mutagenesis studies of AiTTS1 indicated that Y125 and F260 are probably involved in stabilization of dammarenyl cation. A 2.6-fold increase in production of tirucalla-7,24-dien-3 beta-ol was observed when AiSQE1 was coexpressed with mutant AiTTS1 in a yeast system. Furthermore, we functionally characterized the highly expressed cytochrome P450 reductases and cycloartenol synthase. This study helps in further analysis and identification of genes involved in limonoid biosynthesis in Meliaceae/Rutaceae and their production in a metabolically tractable heterologous system.

}, keywords = {24-dien-3 beta-ol, Azadirachta indica A. Juss., Cytochrome P450 system, Limonoids, Meliaceae, Tirucalla-7, Transcriptome}, issn = {0031-9422}, doi = {10.1016/j.phytochem.2021.112669}, author = {Pandreka, Avinash and Chaya, Patil S. and Kumar, Ashish and Aarthy, Thiagarayaselvam and Mulani, Fayaj A. and Bhagyashree, Date D. and Shilpashree, H. B. and Jennifer, Cheruvathur and Ponnusamy, Sudha and Nagegowda, Dinesh and Thulasiram, V. Hirekodathakallu} } @article {47343, title = {Limonoid biosynthesis 3: functional characterization of crucial genes involved in neem limonoid biosynthesis (vol 184, 112669, 2021)}, journal = {Phytochemistry}, volume = {187}, year = {2021}, month = {JUL}, pages = {112751}, type = {Correction}, issn = {0031-9422}, doi = {10.1016/j.phytochem.2021.112751}, author = {Pandreka, Avinash and Chaya, Patil S. and Kumar, Ashish and Aarthy, Thiagarayaselvam and Mulani, Fayaj A. and Bhagyashree, Date D. and Shilpashree, H. B. and Jennifer, Cheruvathur and Ponnusamy, Sudha and Nagegowda, Dinesh and Thulasiram, Hirekodathakallu V.} } @article {47406, title = {Lithium silicate nanosheets with excellent capture capacity and kinetics with unprecedented stability for high-temperature CO2 capture}, journal = {Chemical Science}, volume = {12}, year = {2021}, month = {APR }, pages = {4825-4835}, type = {Article}, abstract = {

An excessive amount of CO2 is the leading cause of climate change, and hence, its reduction in the Earth{\textquoteright}s atmosphere is critical to stop further degradation of the environment. Although a large body of work has been carried out for post-combustion low-temperature CO2 capture, there are very few high temperature pre-combustion CO2 capture processes. Lithium silicate (Li4SiO4), one of the best known high-temperature CO2 capture sorbents, has two main challenges, moderate capture kinetics and poor sorbent stability. In this work, we have designed and synthesized lithium silicate nanosheets (LSNs), which showed high CO2 capture capacity (35.3 wt\% CO2 capture using 60\% CO2 feed gas, close to the theoretical value) with ultra-fast kinetics and enhanced stability at 650 degrees C. Due to the nanosheet morphology of the LSNs, they provided a good external surface for CO2 adsorption at every Li-site, yielding excellent CO2 capture capacity. The nanosheet morphology of the LSNs allowed efficient CO2 diffusion to ensure reaction with the entire sheet as well as providing extremely fast CO2 capture kinetics (0.22 g g(-1) min(-1)). Conventional lithium silicates are known to rapidly lose their capture capacity and kinetics within the first few cycles due to thick carbonate shell formation and also due to the sintering of sorbent particles; however, the LSNs were stable for at least 200 cycles without any loss in their capture capacity or kinetics. The LSNs neither formed a carbonate shell nor underwent sintering, allowing efficient adsorption-desorption cycling. We also proposed a new mechanism, a mixed-phase model, to explain the unique CO2 capture behavior of the LSNs, using detailed (i) kinetics experiments for both adsorption and desorption steps, (ii) in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy measurements, (iii) depth-profiling X-ray photoelectron spectroscopy (XPS) of the sorbent after CO2 capture and (iv) theoretical investigation through systematic electronic structure calculations within the framework of density functional theory (DFT) formalism.

}, issn = {2041-6520}, doi = {10.1039/d0sc06843h}, author = {Belgamwar, Rajesh and Maity, Ayan and Das, Tisita and Chakraborty, Sudip and Vinod, Chathakudath P. and Polshettiwar, Vivek} } @article {47721, title = {Lsi2: A black box in plant silicon transport}, journal = {Plant and Soil}, volume = {466}, year = {2021}, month = {SEP}, pages = {1-20}, type = {Review}, abstract = {Background Silicon (Si) is widely considered a non-essential but beneficial element for higher plants, providing broad protection against various environmental stresses (both biotic and abiotic), particularly in species that can readily absorb the element. Two plasma-membrane proteins are known to coordinate the radial transport of Si (in the form of Si(OH)(4)) from soil to xylem within roots: the influx channel Lsi1 and the efflux transporter Lsi2. From a structural and mechanistic perspective, much more is known about Lsi1 (a member of the NIP-III subgroup of the Major Intrinsic Proteins) compared to Lsi2 (a putative Si(OH)(4)/H+ antiporter, with some homology to bacterial anion transporters). Scope Here, we critically review the current state of understanding regarding the physiological role and molecular characteristics of Lsi2. We demonstrate that the structure-function relationship of Lsi2 is largely uncharted and that the standing transport model requires much better supportive evidence. We also provide (to our knowledge) the most current and extensive phylogenetic analysis of Lsi2 from all fully sequenced higher-plant genomes. We end by suggesting research directions and hypotheses to elucidate the properties of Lsi2. Conclusions Given that Lsi2 is proposed to mediate xylem Si loading and thus root-to-shoot translocation and biosilicification, it is imperative that the field of Si transport focus its efforts on a better understanding of this important topic. With this review, we aim to stimulate and advance research in the field of Si transport and thus better exploit Si to improve crop resilience and agricultural output.}, keywords = {Efflux, Lsi2, Membrane transport, Root-to-shoot translocation, silicon, Xylem loading}, issn = {0032-079X}, doi = {10.1007/s11104-021-05061-1}, author = {Coskun, Devrim and Deshmukh, Rupesh and Shivaraj, S. M. and Isenring, Paul and Belanger, Richard R.} } @article {47364, title = {Methylation as a key regulator of Tau aggregation and neuronal health in Alzheimer{\textquoteright}s disease}, journal = {Cell Communication and Signaling}, volume = {19}, year = {2021}, month = {MAY }, pages = {51}, type = {Review}, abstract = {

Neurodegenerative diseases like Alzheimer{\textquoteright}s, Parkinson{\textquoteright}s and Huntington{\textquoteright}s disease involves abnormal aggregation and accumulation of toxic proteins aggregates. Post-translational modifications (PTMs) of the causative proteins play an important role in the etiology of disease as they could either slow down or accelerate the disease progression. Alzheimer disease is associated with the aggregation and accumulation of two major protein aggregates-intracellular neurofibrillary tangles made up of microtubule-associated protein Tau and extracellular Amyloid-beta plaques. Post-translational modifications are important for the regulation of Tau{\textquoteleft}s function but an imbalance in PTMs may lead to abnormal Tau function and aggregation. Tau methylation is one of the important PTM of Tau in its physiological state. However, the methylation signature on Tau lysine changes once it acquires pathological aggregated form. Tau methylation can compete with other PTMs such as acetylation and ubiquitination. The state of PTM at these sites determines the fate of Tau protein in terms of its function and stability. The global methylation in neurons, microglia and astrocytes are involved in multiple cellular functions involving their role in epigenetic regulation of gene expression via DNA methylation. Here, we have discussed the effect of methylation on Tau function in a site-specific manner and their cross-talk with other lysine modifications. We have also elaborated the role of methylation in epigenetic aspects and neurodegenerative conditions associated with the imbalance in methylation metabolism affecting global methylation state of cells.

}, keywords = {Aggregation, Epigenetics, methylation, Methyltransferases, post-translational modifications, Tau}, doi = {10.1186/s12964-021-00732-z}, author = {Balmik, Abhishek Ankur and Chinnathambi, Subashchandrabose} } @article {47065, title = {Microglial remodeling of actin network by Tau oligomers, via G protein-coupled purinergic receptor, P2Y12R-driven chemotaxis}, journal = {Traffic}, volume = {22}, year = {2021}, month = {MAY}, pages = {153-170}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is associated with age-related neurodegeneration, synaptic deformation and chronic inflammation mediated by microglia and infiltrated macrophages in the brain. Tau oligomers can be released from damaged neurons via various mechanisms such as exosomes, neurotransmitter, membrane leakage etc. Microglia sense the extracellular Tau through several cell-surface receptors and mediate chemotaxis and phagocytosis. The purinergic receptor P2Y12R recently gained interest in neurodegeneration for neuro-glial communication and microglial chemotaxis towards the site of plaque deposition. To understand the effect of extracellular Tau oligomers in microglial migration, the P2Y12R-mediated actin remodeling, reorientation of tubulin network and rate of migration were studied in the presence of ATP. The extracellular Tau species directly interacted with P2Y12R and also induced this purinoceptor expression in microglia. Microglial P2Y12R colocalized with remodeled membrane-associated actin network as a component of migration in response to Tau oligomers. As an inducer of P2Y12R, ATP facilitated the localization of P2Y12R in lamellipodia and filopodia during accelerated microglial migration. The direct interaction of extracellular Tau oligomers with microglial P2Y12R would facilitate the signal transduction in both way, directional chemotaxis and receptor-mediated phagocytosis. These unprecedented findings emphasize that microglia can modulate the membrane-associated actin structure and incorporate P2Y12R to perceive the axis and rate of chemotaxis in Tauopathy.

}, keywords = {actin remodeling, Alzheimer\&apos, chemotaxis, microglia, migration, s disease, Tau Oligomers}, issn = {1398-9219}, doi = {10.1111/tra.12784, Early Access Date = FEB 2021}, author = {Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {47095, title = {Molecular investigation of glycated insulin-induced insulin resistance via insulin signaling and AGE-RAGE axis}, journal = {Biochimica ET Biophysica Acta-Molecular Basis of Disease}, volume = {1867}, year = {2021}, month = {FEB }, pages = {166029}, type = {Article}, abstract = {

Hyperglycemic condition in diabetes promotes glycation of various plasma proteins including insulin. Glycation of insulin has been reported to reduce its biological activity. Reduced biological activity of glycated insulin could be either due to reduced affinity for the insulin receptor and impaired insulin signaling, or it can act as a ligand for the receptor for advanced glycation end products (RAGE) and activates oxidative stress and pro-inflammatory pathways leading to insulin resistance. This study investigates the effect of glycated insulin on both insulin and RAGE signaling. Glycated insulin treatment to Chinese hamster ovary (CHO-IR-GLUT4) cells stably expressing insulin receptor (IR) and glucose transporter fused with a green fluorescent protein (GLUT4-GFP) resulted in the impairment of insulin signaling, as the phosphorylation of IR and AKT significantly reduced, which affected GLUT4 translocation and glucose uptake. Moreover, it also activated RAGE signaling as observed by increased expression of NADPH oxidase accompanied by an increase in reactive oxygen species (ROS). Immunofluorescence study indicated the translocation of NF-kappa B to the nucleus upon treatment of glycated insulin. This was associated with increased RAGE expression, Caspase 3, and cell death. Downregulation of RAGE with the losartan treatment restored the impaired insulin signaling and glucose uptake. Additionally, in silico study demonstrated that glycated insulin has reduced binding affinity to insulin receptor and increased binding affinity to RAGE. Overall, this study demonstrates the role of glycated insulin in exacerbating insulin resistance by impairing insulin signaling as well as stimulating AGE-RAGE signaling.

}, keywords = {AGE, Diabetes, Glycation, Hyperglycemia, insulin, RAGE}, issn = {0925-4439}, doi = {10.1016/j.bbadis.2020.166029}, author = {Walke, Prachi B. and Bansode, Sneha B. and More, Nikita P. and Chaurasiya, Arvindkumar H. and Joshi, Rakesh S. and Kulkarni, Mahesh J.} } @article {47615, title = {Multi-step synthesis of miltefosine: integration of flow chemistry with continuous mechanochemistry}, journal = {Chemistry-A European Journal}, volume = {27}, year = {2021}, month = {DEC }, pages = {17695-17699}, type = {Article}, abstract = {Herein we report for the first time, an advanced continuous flow synthesis of the blockbuster Leishmaniasis drug miltefosine from simple starting materials by a sequence involving four steps of chemical transformation including a continuous mechanochemical step. First three reaction steps were performed in simple tubular reactors in a telescopic mode, while in the last step the product precipitated from the 3(rd) step was used for a continuous mechanochemical synthesis of miltefosine. When compared to a typical batch protocol that takes 15 h, miltefosine was obtained in 58 \% overall yield in flow synthesis mode at the laboratory scale in a total residence time 34 min at synthesis rate of 10 g/hr, which is sufficient to treat 4800 patients per day.}, keywords = {continuous flow, continuous mechanochemistry, miltefosine, multistep synthesis, reactive intermediates}, issn = {0947-6539}, doi = {10.1002/chem.202103499}, author = {Patil, Niteen B. and Atapalkar, Ranjit S. and Chavan, Subhash P. and Kulkarni, Amol A.} } @article {47776, title = {Neem derivatives inhibits tau aggregation}, journal = {Journal of Alzheimer s Disease Reports}, volume = {3}, year = {2021}, month = {JAN}, pages = {169-178}, type = {Article}, abstract = {Tau is a phosphoprotein with natively unfolded conformation that functions to stabilize microtubules in axons. Alzheimer{\textquoteright}s disease pathology triggers several modifications in tau, which causes it to lose its affinity towards microtubule, thus, leading to microtubule disassembly and loss of axonal integrity. This elicit accumulation of tau as paired helical filaments is followed by stable neurofibrillary tangles formation. A large number of small molecules have been isolated from Azadirachta indica with varied medicinal applications. The intermediate and final limonoids, nimbin and salannin respectively, isolated from Azadirachta indica, were screened against tau aggregation. ThS and ANS fluorescence assay showed the role of intermediate and final limonoids in preventing heparin induced cross-β sheet formation and also decreased hydrophobicity, which are characteristic nature of tau aggregation. Transmission electron microscopy studies revealed that limonoids restricted the aggregation of tau to fibrils; in turn, limonoids led to the formation of short and fragile aggregates. Both the limonoids were non-toxic to HEK293T cells thus, substantiating limonoids as a potential lead in overcoming Alzheimer{\textquoteright}s disease.}, doi = {10.3233/ADR-190118}, author = {Nalini, Gorantla Vijay and Das, Rashmi and Mulani, Fayaj Alam and Thulasiram, Hirekodathakallu V. and Chinnathambi, Subashchandrabose} } @article {47676, title = {Ni-catalyzed highly enantioselective synthesis of sulfur protected P-stereogenic supramolecular phosphine}, journal = {Journal of Chemical Sciences}, volume = {133}, year = {2021}, month = {DEC}, pages = {119}, type = {Article}, abstract = {As phosphines readily invert, the synthesis of P-chiral phosphines is a challenging task and has been rarely investigated. We report the synthesis of a nickel complex [Ni-((S,S)Me-FerroLANE)(phenyl)(I)] (Ni-Cat.1) and its performance in a P-C coupling reaction to generate P-chiral phosphine. The Ni-Cat.1 was synthesized by mixing ligand (S,S) Me-FerroLANE with the metal precursor [(diphenylphosphanyl)nickel(phenyl)(I)] in good yield. Ni-Cat.1 was characterized using different spectroscopic and analytical techniques. Treatment of racemic methyl(phenyl)phosphine (1) with 1-(3-iodophenyl)urea (2) produced the corresponding P-chiral supramolecular phosphine (3). Optimization of reaction parameters produced sulfur protected phosphine N-(3-(methyl(phenyl)phosphorothioyl)phenyl)formamide (3{\textquoteright}) with excellent enantiomeric excess (99\% ee) and moderate conversion (51\%).}, keywords = {Asymmetric synthesis, Nickel catalyst, P-C coupling, P-Stereogenic phosphine, supramolecular ligands}, issn = {0974-3626}, doi = {10.1007/s12039-021-01978-3}, author = {Koshti(S), Vijay S. and Chandanshive, Amol C. and Mote, Nilesh R. and Chikkali, Samir H.} } @article {47068, title = {Operando generated ordered heterogeneous catalyst for the selective conversion of CO2 to methanol}, journal = {ACS Energy Letters}, volume = {6}, year = {2021}, month = {FEB }, pages = {509-516}, type = {Article}, abstract = {

The discovery of new materials for efficient transformation of carbon dioxide (CO2) into desired fuel can revolutionize large-scale renewable energy storage and mitigate environmental damage due to carbon emissions. In this work, we discovered an operando generated stable Ni-In kinetic phase that selectively converts CO2 to methanol (CTM) at low pressure compared to the state-of-the-art materials. The catalytic nature of a well-known methanation catalyst, nickel, has been tuned with the introduction of inactive indium, which enhances the CTM process. The remarkable change in the mechanistic pathways toward methanol production has been mapped by operando diffuse reflectance infrared Fourier transform spectroscopy analysis, corroborated by first-principles calculations. The ordered arrangement and pronounced electronegativity difference between metals are attributed to the complete shift in mechanism. The approach and findings of this work provide a unique advance toward the next-generation catalyst discovery for going beyond the state-of-the-art in CO2 reduction technologies.

}, issn = {2380-8195}, doi = {10.1021/acsenergylett.0c02614}, author = {Cherevotan, Arjun and Raj, Jithu and Dheer, Lakshay and Roy, Soumyabrata and Sarkar, Shreya and Das, Risov and Vinod, Chathakudath P. and Xu, Shaojun and Wells, Peter and Waghmare, V, Umesh and Peter, Sebastian C.} } @article {47742, title = {Organic-inorganic perovskitoid with zwitterion cysteamine linker and its crystal-crystal transformation to ruddlesden-popper phase}, journal = {Angewandte Chemie-International Edition}, volume = {60}, year = {2021}, month = {AUG }, pages = {18750-18760}, type = {Article}, abstract = {We demonstrate synthesis of a new low-D hybrid perovskitoid (a perovskite-like hybrid halide structure, yellow crystals, P21/n space group) using zwitterion cysteamine (2-aminoethanethiol) linker, and its remarkable molecular diffusion-controlled crystal-to-crystal transformation to Ruddlesden-Popper phase (Red crystals, Pnma space group). Our stable intermediate perovskitoid distinctly differs from all previous reports by way of a unique staggered arrangement of holes in the puckered 2D configuration with a face-sharing connection between the corrugated-1D double chains. The PL intensity for the yellow phase is 5 orders higher as compared to the red phase and the corresponding average lifetime is also fairly long (143 ns). First principles DFT calculations conform very well with the experimental band gap data. We demonstrate applicability of the new perovskitoid yellow phase as an excellent active layer in a self-powered photodetector and for selective detection of Ni2+ via On-Off-On photoluminescence (PL) based on its composite with few-layer black phosphorous.}, keywords = {Crystal growth, organic-inorganic hybrid composites, perovskite phases, photodetectors, zwitterions}, issn = {1433-7851}, doi = {10.1002/anie.202105918}, author = {Kour, Prachi and Reddy, Mallu Chenna and Pal, Shiv and Sidhik, Siraj and Das, Tisita and Pandey, Padmini and Mukherjee, Shatabdi Porel and Chakraborty, Sudip and Mohite, Aditya D. and Ogale, Satishchandra} } @article {47648, title = {Organoruthenium (II) complexes featuring pyrazole-linked thiosemicarbazone ligands: synthesis, DNA/BSA interactions, molecular docking, and cytotoxicity studies}, journal = {Applied Organometallic Chemistry}, volume = {35}, year = {2021}, month = {OCT}, pages = {e6343}, type = {Article}, abstract = {A series of pyrazol-derived thiosemicarbazone ligands (L1-L4) were synthesized and reacted with [Ru(p-cymene)(mu-Cl)Cl](2) to yield a series of {\textquoteleft}{\textquoteleft}piano-stool{\textquoteright}{\textquoteright}-type binuclear ruthenium (II)-arene-thiosemicarbazone complexes (C1-C8) of the general type [(Ru(eta(6)-p-cym)L)(2)(mu-im/azpy)] Cl1-2 (L = diphenylpyrazole thiosemicarbazone; cym = p-cymene; im = imidazole; azpy = 4,4 {\textquoteleft}-azopyridine). The thiosemicarbazone ligands act as N and S donors binding to the Ru(II) center via the imine nitrogen and the thione sulfur atoms. The complexes were characterized by NMR, FTIR, UV-Vis spectroscopy, and ESI+ mass spectrometry. The binding of the complexes to calf thymus deoxyribonucleic acid (CT-DNA) and bovine serum albumin (BSA) was evaluated, and it has been established that the binuclear complexes have good binding efficacies with DNA (K-b = 10(4)-10(5) M-1) and BSA (K-a = 10(5)-10(6) M-1). This is attributed to the arene moieties present in the ligands of the complexes that can have hydrophobic interactions with DNA/BSA. Ethidium bromide (EB) displacement studies and DNA viscosity measurements revealed intercalative interaction of the complexes with DNA. Static interaction of the complexes with BSA was revealed by fluorescence quenching studies. Molecular docking studies confirmed base stacking, H-bonding, and hydrophobic interactions with the biomolecules. In vitro antiproliferative studies of the complexes affirmed that the complexes are cytotoxic towards the HeLa (human cervical cancer) cell line with IC50 values in range of 17.3-41.3 mu M.}, keywords = {Binuclear ruthenium (II) complexes, BSA binding interactions, DNA, HeLa human cervical carcinoma, pyrazole-derived thiosemicarbazone}, issn = {0268-2605}, doi = {10.1002/aoc.6343}, author = {Khanvilkar, Priyanka and Dash, Soumya R. and Banerjee, Devjani and Vohra, Aliasgar and Devkar, Ranjitsinh and Chakraborty, Debjani} } @article {47758, title = {Palladium supported on magnesium hydroxyl fluoride: an effective acid catalyst for the hydrogenation of imines and N-heterocycles}, journal = {New Journal of Chemistry}, volume = {45}, year = {2021}, month = {OCT }, pages = {19572-19583}, type = {Article}, abstract = {Palladium catalysts supported on acidic fluorinated magnesium hydroxide Pd/MgF2-x(OH)(x) were prepared through precipitation or impregnation methods. Applications to the hydrogenation of various aldimines and ketimines resulted in good catalytic activities at mild temperatures using one atmosphere of hydrogen. Quinolines, pyridines and other N-heterocycles were successfully hydrogenated at higher temperature and hydrogen pressure using low palladium loadings and without the use of any acid additive. Such reactivity trend confirmed the positive effect of the Bronsted and Lewis acid sites from the fluorinated magnesium hydroxide support resulting in the effective pre-activation of N-heterocycle substrates and therefore in the good catalytic activity of the palladium nanoparticles during the hydrogenations. As demonstrated in the hydrogenation of imines, the catalyst was recycled up to 10 times without either loss of activity or palladium leaching.}, issn = {1144-0546}, doi = {10.1039/d1nj03760a}, author = {Kokane, Reshma and Corre, Yann and Kemnitz, Erhard and Dongare, Mohan K. and Agbossou-Niedercorn, Francine and Michon, Christophe and Umbarkar, Shubhangi B.} } @article {47428, title = {Partially bio-based triarylamine-containing polyimides: synthesis, characterization and evaluation in non-volatile memory device applications}, journal = {European Polymer Journal}, volume = {147}, year = {2021}, month = {MAR }, pages = {110327}, type = {Article}, abstract = {

A new triarylamine-containing diamine, viz. 4, 4{\textquoteright}-diamino-4 {\textquoteleft}{\textquoteright} pentadecyltriphenylamine was synthesised starting from cashew nut shell liquid (CNSL) - a non-edible by-product of cashew processing industry. Three new partially bio-based triarylamine-containing polyimides were synthesised by one-step high temperature solution poly-condensation of 4, 4{\textquoteright}-diamino-4 {\textquoteleft}{\textquoteright} pentadecyltriphenylamine with aromatic dianhydrides, namely, 3,3{\textquoteright},4,4{\textquoteright}-biphenyltetracarboxylic dianhydride (BPDA), 4,4{\textquoteright}-oxydiphthalic anhydride (ODPA) and 4,4{\textquoteright}-(hexa-fluoroisopropylidene) diphthalic anhydride (6-FDA). Polyimides were determined to be of reasonably high molecular weights as inherent viscosity and number average molecular weights (M-n, Polystyrene standard) values were in the range 0.54-0.60 dL g(-1) and 26,800-43,500 g mol(-1), respectively. Polyimides exhibited excellent solubility in common organic solvents and film-forming nature along with reasonably good thermal properties as indicated by temperature for 10\% weight loss (T-10) and glass transition temperatures (T-g) which were in the range 418-447 and 165-225 degrees C, respectively. The optical and electrochemical band-gap values were in the range of 1.95-1.98 eV and 1.671-1.745 eV, respectively. Among triarylamine-containing polyimide devices, BPDA-based device showed acceptable current-voltage and non-volatile memory properties such as the endurance of 500 cycles and 1000 s of retention time. The conduction mechanism developed in the memory devices was also explored and was found to follow Ohmic and Schottky conduction mechanisms.

}, keywords = {Bio-based polyimides, CNSL, Memory device, pentadecyl, Triarylamine}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2021.110327}, author = {Chatterjee, Deepshikha and Jadhav, Uday A. and Javaregowda, Bharathkumar H. and Dongale, Tukaram D. and Patil, Pramod S. and Wadgaonkar, Prakash P.} } @article {47056, title = {Phosphoinositides signaling modulates microglial actin remodeling and phagocytosis in Alzheimer{\textquoteright}s disease}, journal = {Cell Communication and Signaling}, volume = {19}, year = {2021}, month = {FEB}, pages = {28}, type = {Review}, abstract = {

Alzheimer{\textquoteright}s disease is one of the neurodegenerative diseases, characterized by the accumulation of abnormal protein deposits, which disrupts signal transduction in neurons and other glia cells. The pathological protein in neurodegenerative diseases, Tau and amyloid-P contribute to the disrupted microglial signaling pathways, actin cytoskeleton, and cellular receptor expression. The important secondary messenger lipids i.e., phosphatidylinositols are largely affected by protein deposits of amyloid-beta in Alzheimer{\textquoteright}s disease. Phosphatidylinositols are the product of different phosphatidylinositol kinases and the state of phosphorylation at D3, D4, and D5 positions of inositol ring. Phosphatidylinositol 3,4,5-triphosphate (PI 3, 4, 5-P3) involves in phagocytic cup formation, cell polarization, whereas Phosphatidylinositol 4,5-bisphosphate (PI 4, 5-P2)-mediates the process of phagosomes formation and further its fusion with early endosome.. The necessary activation of actin-binding proteins such as Rac, WAVE complex, and ARP2/3 complex for the actin polymerization in the process of phagocytosis, migration is regulated and maintained by PI 3, 4, 5-P3 and PI 4, 5-P2. The ratio and types of fatty acid intake can influence the intracellular secondary lipid messengers along with the cellular content of phaphatidylcholine and phosphatidylethanolamine. The Amyloid-beta deposits and extracellular Tau seeds disrupt phosphatidylinositides level and actin cytoskeletal network that hamper microglial-signaling pathways in AD. We hypothesize that being a lipid species intracellular levels of phosphatidylinositol would be regulated by dietary fatty acids. Further we are interested to understand phosphoinositide-based signaling cascades in phagocytosis and actin remodeling.

}, keywords = {actin remodeling, Alzheimer{\textquoteright}s disease, Dietary fatty acids, Phagocytosis, Phosphoinositides, PI3K signaling}, doi = {10.1186/s12964-021-00715-0}, author = {Desale, Smita Eknath and Chinnathambi, Subashchandrabose} } @article {47038, title = {Phosphorus ligands in hydroformylation and hydrogenation: a personal account}, journal = {Chemical Record}, year = {2021}, month = {MAR}, type = {Article; Early Access}, abstract = {

Metal-catalyzed hydroformylation and hydrogenation heavily rely on ligands, among which phosphorous ligands play a pivotal role. This personal account presents a selection of three distinct classes of phosphorous ligands, namely, monodentate meta-substituted phosphinites, bis-phosphites, and P-chiral supramolecular phosphines, developed in our group. The synthesis of these ligands, isolation, characterization, and their performance in transition metal-catalyzed hydroformylation, isomerizing hydroformylation, and asymmetric hydrogenation of olefins is summarized. The state of the art development in iron-catalyzed hydroformylation of alkenes and our contributions to the field is discussed. Use of phosphines enabled iron-catalyzed hydroformylation of alkenes under mild conditions. Thus, this account demonstrates the central role of phosphorus ligands in industrially relevant transformations such as hydrogenation and hydroformylation. The seemingly matured field of ligand discovery still holds significant potential and will steer the field of homogeneous catalysis.

}, keywords = {Homogeneous catalysis, Hydroformylation, Hydrogenation, Olefins, Phosphorus ligands}, issn = {1527-8999}, doi = {10.1002/tcr.202100007, Early Access Date = MAR 2021}, author = {Tewari, Tanuja and Kumar, Rohit and Chandanshive, Amol C. and Chikkali, Samir H.} } @article {47502, title = {Photoactive anthraquinone-based host-guest assembly for long-lived charge separation}, journal = {Journal of Physical Chemistry C }, volume = {125}, year = {2021}, month = {MAY}, pages = {10891-10900}, type = {Article}, abstract = {Porous 2D covalent organic frameworks (COF) that are assembled axially through weak p-stacking interactions can provide reticular charge transport channels while playing host to kinetically stabilized reactive molecular redox states. Here we demonstrate a host-guest supramolecular charge transfer (CT) assembly using photoactive anthraquinone-based COF as an acceptor while incarcerating the electron donor N,N-dimethylaniline (DMA) inside it. Employing femtosecond broadband transient absorption spectroscopy in combination with electron paramagnetic resonance (EPR) studies, we show that the CT occurs rapidly within <110 fs after photoexcitation, subsequently leading to long-lived charge separation with 13\% quantum efficiency at room temperature. The photoinduced EPR signature of the long-lived confined DMA cation radical confirms the disparate regions of charge localization while H-1-C-13 correlation experiments using solid-state NMR spectroscopy enumerate the packing of the amines inside the host-guest COF assembly. Our work demonstrates the potency of charge transport pathways in supramolecular assemblies for efficient charge separation which if optimally tuned should pave the way for COF-based photocatalytic reaction centers.}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.1c02497}, author = {Jha, Ajay and Mote, Kaustubh R. and Chandra, Suman and Madhu, Perunthiruthy K. and Dasgupta, Jyotishman} } @article {47041, title = {Photodynamic sensitizers modulate cytoskeleton structural dynamics in neuronal cells}, journal = {Cytoskeleton}, volume = {78}, year = {2021}, month = {JUN}, pages = {232-248}, type = {Review}, abstract = {

The neuronal cytoskeleton plays a crucial role in maintaining cell integrity and functioning of neurons. Cytoskeleton deformities have been reported to be associated with neurodegenerative diseases thus; cytoskeleton can be targeted for therapeutic strategies. The therapeutic application of photosensitive molecule is termed as photodynamic therapy (PDT). PDT has been applied in the field of dermatology, cancer biology, and antimicrobial therapy. PDT induces several changes in cells, which include induction of apoptosis, DNA damage, and induction of inflammatory response. PDT has been also reported to modulate cytoskeleton such as actin dynamics. The in vitro studies suggested that PDT using dyes such as Toluidine Blue and Rose Bengal effectively modulated the actin cytoskeleton, neurite outgrowth, tubulin, and Tau aggregation. In this review, we focused on the effect of photosensitized molecules on various cytoskeleton proteins. We hypothesize that PDT could have potency against Alzheimer{\textquoteright}s disease and other neurodegenerative disorders.

}, keywords = {Actin, Alzheimer\&apos, cytoskeleton modulation, neuronal cytoskeleton, photodynamic therapy, s disease, Tubulin}, issn = {1949-3584}, doi = {10.1002/cm.21655, Early Access Date = MAR 2021}, author = {Dubey, Tushar and Chinnathambi, Subashchandrabose} } @article {47817, title = {Photodynamic treatment modulates various GTPase and cellular signalling pathways in Tauopathy}, journal = {Small GTPases}, year = {2021}, month = {JUN}, pages = {1-13}, type = {Article}, abstract = {ABSTRACTThe application of photo-excited dyes for treatment is known as photodynamic therapy (PDT). PDT is known to target GTPase proteins in cells, which are the key proteins of diverse signalling cascades which ultimately modulate cell proliferation and death. Cytoskeletal proteins play critical roles in maintaining cell integrity and cell division. Whereas, it was also observed that in neuronal cells PDT modulated actin and tubulin resulting in increased neurite growth and filopodia. Recent studies supported the role of PDT in dissolving the extracellular amyloid beta aggregates and intracellular Tau aggregates, which indicated the potential role of PDT in neurodegeneration. The advancement in the field of PDT led to its clinical approval in treatment of cancers, brain tumour, and dermatological acne. Although several question need to be answered for application of PDT in neuronal cells, but the primary studies gave a hint that it can emerge as potential therapy in neural cells.}, doi = {10.1080/21541248.2021.1940722}, author = {Dubey, Tushar and Chinnathambi, Subashchandrabose} } @article {47710, title = {Plasma-derived extracellular vesicles reveal galectin-3 binding protein as potential biomarker for early detection of glioma}, journal = {Frontiers in Oncology}, volume = {11}, year = {2021}, month = {NOV 26}, pages = {778754}, type = {Article}, abstract = {{Gliomas are the most common type of the malignant brain tumor, which arise from glial cells. They make up about 40\% of all primary brain tumors and around 70\% of all primary malignant brain tumors. They can occur anywhere in the central nervous system (CNS) and have a poor prognosis. The average survival of glioma patients is approximately 6-15 months with poor aspects of life. In this edge, identification of proteins secreted by cancer cells is of special interest because it may provide a better understanding of tumor progression and provide early diagnosis of the diseases. Extracellular vesicles (EVs) were isolated from pooled plasma of healthy controls (n=03) and patients with different grades of glioma (Grade I or II or III}, keywords = {blood-based biomarker, early detection, galectin-3 binding protein, plasma-derived extracellular vesicles, proteomics}, issn = {2234-943X}, doi = {10.3389/fonc.2021.778754}, author = {Rana, Rashmi and Chauhan, Kirti and Gautam, Poonam and Kulkarni, Mahesh and Banarjee, Reema and Chugh, Parul and Chhabra, Satnam Singh and Acharya, Rajesh and Kalra, Samir Kumar and Gupta, Anshul and Jain, Sunila and Ganguly, Nirmal Kumar} } @article {47088, title = {PNA-mediated efflux inhibition as a therapeutic strategy towards overcoming drug resistance in Mycobacterium smegmatis}, journal = {Microbial Pathogenesis}, volume = {151}, year = {2021}, month = {FEB}, pages = {104737}, type = {Article}, abstract = {

The emergence of antibiotic-resistant strains of Mycobacterium tuberculosis and the decelerating development of new and effective antibiotics has impaired the treatment of tuberculosis (TB). Efflux pump inhibitors (EPIs) have the potential to improve the efficacy of existing anti-TB drugs although with toxicity limitations. Peptide nucleic acids (PNAs), oligonucleotide mimics, by virtue of their high nucleic acid binding specificity have the capability to overcome this drawback. We, therefore, investigated the efflux pump inhibitory properties of a PNA designed against an efflux pump of Mycobacterium smegmatis. LfrA, an efflux pump found in M. smegmatis, is majorly involved in conferring innate drug resistance to this strain and, therefore, was selected as a target for gene silencing via PNA. qRT-PCR and EtBr assays confirmed the EPI activity of the anti-lfrA PNA. On testing the effect of the anti-lfrA PNA on the bactericidal activity of a fluoroquinolone, norfloxacin, we observed that 5 mu M of anti-lfrA PNA in combination with norfloxacin led to an enhanced killing of up to 2.5 log-fold against wild-type and a lab-generated multidrug resistant strain, exemplifying its potential in countering resistance. Improved efficacy was also observed against intra-macrophage mycobacteria, where the drug-PNA combination enhanced bacterial clearance by 1.3 log-fold. Further, no toxicity was observed with PNA concentrations up to 4 times higher than the efficacious anti-lfrA PNA concentration. Thus, PNA, as an adjuvant, presents a novel and viable approach to rejuvenate anti-TB therapeutics.

}, keywords = {Adjuvant, Antibiotic resistance, Antisense, Efflux pump, Gene silencing, Mycobacteria, Peptide nucleic acid (PNA)}, issn = {0882-4010}, doi = {10.1016/j.micpath.2021.104737}, author = {Ghosh, Saptarshi and Cotta, Karishma Berta and Hande, Aniket A. and Fernandes, Moneesha and Mehra, Sarika} } @article {47819, title = {Practical synthesis of 5-hydroxy-2(5H)-furanone from furan}, journal = {Results in Chemistry}, volume = {3}, year = {2021}, month = {JAN}, pages = {100170}, type = {Article}, abstract = {A simple, efficient and scalable method for the synthesis of 5-hydroxy-2(5H)-furanone from furan has been developed on a multigram scale. Oxidation of furan has been performed using oxone as the sole oxidant and water as a solvent, which makes this protocol practical and thus industrially applicable.}, keywords = {5-Hydroxy-2(5)-furanone, Furan oxidation, On-water reaction, Oxone, scalable synthesis}, issn = {2211-7156}, doi = {10.1016/j.rechem.2021.100170}, author = {Subhash P. Chavan and Appasaheb L. Kadam} } @article {47346, title = {Rapid and accurate nucleobase detection using FnCas9 and its application in COVID-19 diagnosis}, journal = {Biosensors \& Bioelectronics}, volume = {183}, year = {2021}, month = {JUL }, pages = {113207}, type = {Article}, abstract = {

Rapid detection of DNA/RNA pathogenic sequences or variants through point-of-care diagnostics is valuable for accelerated clinical prognosis, as witnessed during the recent COVID-19 outbreak. Traditional methods relying on qPCR or sequencing are tough to implement with limited resources, necessitating the development of accurate and robust alternative strategies. Here, we report FnCas9 Editor Linked Uniform Detection Assay (FELUDA) that utilizes a direct Cas9 based enzymatic readout for detecting nucleobase and nucleotide sequences without transcleavage of reporter molecules. We also demonstrate that FELUDA is 100\% accurate in detecting single nucleotide variants (SNVs), including heterozygous carriers, and present a simple web-tool JATAYU to aid end-users. FELUDA is semi-quantitative, can adapt to multiple signal detection platforms, and deploy for versatile applications such as molecular diagnosis during infectious disease outbreaks like COVID-19. Employing a lateral flow readout, FELUDA shows 100\% sensitivity and 97\% specificity across all ranges of viral loads in clinical samples within 1hr. In combination with RT-RPA and a smartphone application True Outcome Predicted via Strip Evaluation (TOPSE), we present a prototype for FELUDA for CoV-2 detection closer to home.

}, keywords = {CRISPRDx, FELUDA, FnCas9, LFA, SARS-CoV2, SNV detection}, issn = {0956-5663}, doi = {10.1016/j.bios.2021.113207}, author = {Azhar, Mohd and Phutela, Rhythm and Kumar, Manoj and Ansari, Asgar Hussain and Rauthan, Riya and Gulati, Sneha and Sharma, Namrata and Sinha, Dipanjali and Sharma, Saumya and Singh, Sunaina and Acharya, Sundaram and Sarkar, Sajal and Paul, Deepanjan and Kathpalia, Poorti and Aich, Meghali and Sehgal, Paras and Ranjan, Gyan and Bhoyar, Rahul C. and Singhal, Khushboo and Lad, Harsha and Patra, Pradeep Kumar and Makharia, Govind and Chandak, Giriraj Ratan and Pesala, Bala and Chakraborty, Debojyoti and Maiti, Souvik and Indian CoV2 Genomics Genetic Epide} } @article {47401, title = {Rapid identification and tracking of SARS-CoV-2 variants of concern}, journal = {Lancet}, volume = {397}, year = {2021}, month = {APR}, pages = {1346-1347}, type = {Letter}, issn = {0140-6736}, doi = {10.1016/S0140-6736(21)00470-0}, author = {Chakraborty, Debojyoti and Agrawal, Anurag and Maiti, Souvik} } @article {47464, title = {Reactions of 2,3-dibromonaphthalene-1,4-dione and pyridyl amines: X-ray structures, DFT investigations, and selective detection of the Hg2+ and Ni2+ ions}, journal = {Engineered Science}, volume = {14}, year = {2021}, month = {FEB}, pages = {78-93}, type = {Article}, abstract = {

In this work, the products formed by the reaction between 2,3-dibromonaphthalene-1,4-dione with (pyridine-2-yl)methanamine and (pyridine-4-yl)methanamine are discussed in detial. The products 2-amino-3-bromonaphthalene-1,4-dione (A) and 2-aminonaphthalene-1,4-dione (B(1)) obtained are characterized through\ 1H and\ 13C-NMR, FTIR, mass spectrometry, single-crystal X-ray diffraction experiments, which are in conjunction with wB97X based density functional theory.\ compound\ A\ can effectively and selectively detect Hg2+\ and Ni2+\ ions, and proposes a potential mechanism of action.

}, issn = {2576-9898}, doi = {10.30919/es8d427}, author = {Aggrwal, Gunjan and Salunke-Gawali, Sunita and Gejji, Shridhar P. and Nikalje, Milind and Chakravarty, Debamitra and Verma, Prakash L. and Gosavi-Mirkute, Prajkta and Harihar, Shital and Jadhav , Mahesh and Puranik, Vedavati G.} } @article {47498, title = {Red fluorescent ultra-small gold nanoclusters functionalized with signal molecules to probe specificity in quorum sensing receptors in gram-negative bacteria}, journal = {Archives of Microbiology}, year = {2021}, month = {JUN}, type = {Article; Early Access}, abstract = {Ultra-small (size < 2 nm) gold nanoclusters (AuNCs) are used as fluorescent probes which have excellent applications in bioimaging and sensing due to their emission in visible and NIR spectral region. Here, this property is exploited for understanding the quorum sensing phenomenon in bacteria which is regulated by signal molecules which are specific to various species. AuNCs are then functionalized with the signal molecules, Acyl Homoserine Lactones (AHL) of varying carbon chain length, C-6, C-8, and C-12 without 3rd C modification, to sense different strains of gram-negative bacteria i.e., Escherichia coli, Cronobacter sakazakii and Pseudomonas aeruginosa. In the concentration employed, selectivity to a limited extent is observed between the three Gram-negative bacteria tested. E. coli showed emission with all the AHL conjugates and P. aeruginosa did not interact with any of the three conjugates, whereas C. sakazakii showed specificity to C-8AHL. This is probably due to selectivity for cognate AHL molecules of appropriate concentrations.}, keywords = {acyl homoserine lactone, fluorescence imaging, Gold nanoclusters, quorum sensing, Receptors, selectivity}, issn = {0302-8933}, doi = {10.1007/s00203-021-02338-y, Early Access Date = JUN 2021}, author = {Chahande, Anurag M. and Lathigara, Disha and Prabhune, Asmita A. and Devi, R. Nandini} } @article {47361, title = {Refining plant oils and sugars to platform chemicals, monomers, and polymers}, journal = {Green Chemistry}, volume = {23}, year = {2021}, month = {MAY}, pages = {4255-4295}, type = {Review}, abstract = {

As fossil resources continue to dwindle and environmental concerns are magnified, finding sustainable alternatives is the only way to mitigate resource availability and derisk the planet. The principles of Green Chemistry may provide guidance in this case, and renewable resources can be converted into useful platform chemicals, monomers, and polymers. This critical review examines the possibility of utilizing renewable plant oils and sugars to produce feedstock chemicals, monomers, and polymers. Among the seven isomerizing functionalization reactions of plant oils, isomerizing alkoxycarbonylation displays the highest terminal selectivity. Despite the low reactivity of sugar-derived isohexides, new strategies have been deployed to convert isohexides into difunctional monomers and polymers. The commercialization of isohexides and a few polymers derived from these building blocks has just commenced. Thus, challenges associated with isomerizing functionalization of plant oils and the use of sugar-derived isohexides in chemical syntheses have been summarized, and the potential of these renewable resources has been evaluated.

}, issn = {1463-9262}, doi = {10.1039/d1gc00955a, Early Access Date = MAY 2021}, author = {Pandey, Swechchha and Rajput, Bhausaheb S. and Chikkali, Samir H.} } @article {47416, title = {Reusable magnetic nanocatalyst for bio-fuel additives: the ultrasound-assisted synthesis of solketal dagger}, journal = {Sustainable Energy \& Fuels }, volume = {5}, year = {2021}, month = {APR}, pages = {2362-2372}, type = {Article}, abstract = {

Acetalization of glycerol into solketal, a potential fuel additive, is a promising approach to utilizing the large waste-stream of glycerol from the biodiesel industry. Herein, we report an efficient ultrasound-assisted room temperature synthesis of solketal by acetalization of glycerol with acetone using an easily recoverable sulfonic acid-functionalized, silica-coated Fe3O4 magnetic nanoparticle (Fe3O4@SiO2@SO3H MNP, FSS MNP) catalyst. The morphology, chemical composition and magnetic properties of the catalyst were elucidated. The acetalization of glycerol was carried out under ultrasonication at room temperature, resulting in 97\% glycerol conversion after 15 minutes and 95\% isolated yield of solketal with 100\% selectivity for this acetal. The facile magnetic retrievability of the catalyst imparted operational simplicity to the solketal synthetic protocol, avoiding complicated catalyst separation and product purification processes. The FSS catalyst was magnetically recycled for up to five catalytic experiments, maintaining a glycerol conversion of 95\% and without deterioration in its selectivity, composition, morphology or magnetic properties, thereby ameliorating the green aspects of the protocol.

}, issn = {2398-4902}, doi = {10.1039/d0se01900c, Early Access Date = MAR 2021}, author = {Rajkumari, Kalyani and Changmai, Bishwajit and Meher, Ananta Kumar and Vanlalveni, Chhangte and Sudarsanam, Putla and Wheatley, Andrew E. H. and Rokhum, Samuel Lalthazuala} } @article {47051, title = {Rhamonolipids produced by Pseudomonas aeruginosa promotes methane hydrates formation in fixed bed silica gel medium}, journal = {Marine Geophysical Research}, volume = {42}, year = {2021}, month = {MAR}, pages = {5}, type = {Article}, abstract = {

Natural gas hydrates are seen as an alternative future energy source. They have also been valued for their carbon dioxide capturing capability, gas separation, desalination, natural gas storage and transportation. Developing economical and viable gas hydrate based technology is one of the most promising research areas of present decade. Successful commercialization of gas hydrate based technology is often curtailed due to slow formation rate. The present study evaluates biosurfactant as a kinetic promoter of methane hydrates formation in a fixed bed C type silica gel medium. Biosurfactant was produced by growing Pseudomonas aeruginosa strain A11 in glycerol supplemented mineral salt medium. Biosurfactant characterization with FTIR, NMR and MALDI-TOF spectroscopy reveled it to be a glycolipids type biosurfactant namely rhamnolipids. Saturating C type silica gel with of 100 ppm rhamnolipids solution enhanced the rate of methane hydrates formation by reducing the induction time. Mole of methane consumed and percentage of water to hydrate conversion was observed to be more in 1000 ppm rhamnolipids saturated C type silica gel as compared to quiescent water system and water saturated silica gel system. Overall results suggest that rhamonolipids produced by strain A11 in combination with silica gel can be utilized as environmentally safe kinetic promoter for methane hydrate formation.

}, keywords = {Biosurfactant, Energy, Glycolipids, Induction time, Kinetic promoter}, issn = {0025-3235}, doi = {10.1007/s11001-020-09426-6}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Balomajumder, Chandrajit and Kumar, Rajnish and Singh, Anil Kumar and Santhakumari, B. and Kumar, Pushpendra and Laik, Sukumar} } @article {47831, title = {Rigidity dictates spontaneous helix formation of thermoresponsive colloidal chains in poor solvent}, journal = {ACS Nano}, volume = {15}, year = {2021}, month = {DEC}, pages = {19702-19711}, type = {Article}, abstract = {The formation of helical motifs typically requires specific directional interactions. Here, we demonstrate that isotropic interparticle attraction can drive self-assembly of colloidal chains into thermo-reversible helices, for chains with a critical level of backbone rigidity. We prepare thermoresponsive colloidal chains by cross-linking PNIPAM microgel-coated polystyrene colloids ({\textquotedblleft}monomers{\textquotedblright}), aligned in an AC electric field. We control the chain rigidity by varying cross-linking time. Above the LCST of PNIPAM, there is an effective attraction between monomers so that the colloidal chains are in a bad solvent. On heating, the chains decrease in size. For the most rigid chains, the decrease is modest and is not accompanied by a change in shape. Much less rigid chains form relatively compact structures, resulting in a large increase in the local monomer density. Unusually, chains with intermediate rigidity spontaneously assemble into helical structures. The chain helicity increases with temperature and plateaus above the collapse transition temperature of the microgel particles. We simulate a minimal model that captures the spontaneous emergence of the helical conformations of the polymeric chain and provides insight into this shape transition. Our work suggests that a purely mechanical instability for semiflexible filaments can drive helix formation, without the need to invoke directional interactions.}, doi = {10.1021/acsnano.1c07048}, author = {Biswas, Bipul and Mitra, Debarshi and KP, Fayis and Bhat, Suresh and Chatterji, Apratim and Kumaraswamy, Guruswamy} } @article {47641, title = {Role of preparation parameters of Cu-Zn mixed oxide catalyst in solvent free glycerol carbonylation with urea}, journal = {Journal of the Indian Chemical Society}, volume = {98}, year = {2021}, month = {JUL}, pages = {100090}, type = {Article}, abstract = {Solvent-free carbonylation of glycerol with urea to glycerol carbonate (GC) was achieved over heterogeneous Cu-Zn mixed oxide catalyst. Cu-Zn catalysts with different ratios of Cu:Zn were prepared using co-precipitation (CP) and oxalate gel (OG) methods. As compared to CuO-ZnO(2:1) catalyst prepared by oxalate gel (OG) method, much higher conversion of glycerol and highest selectivity towards glycerol carbonate (GC) was achieved with CuO-ZnO_CP(2:1) catalyst. Physicochemical properties of prepared catalysts were investigated by using XRD, FT-IR, BET, TPD of CO2 and NH3 and TEM techniques. The effect of stoichiometric ratio of Cu/Zn, calcination temperature of CuO-ZnO catalysts and effect of reaction parameters such as molar ratio of substrates, time and temperature on glycerol conversion to GC were critically studied. Cu/Zn of 2:1 ratio, glycerol-urea 1:1 molar ratio, 145 degrees C reaction temperatures were found to be optimized reaction conditions to achieve highest glycerol conversion of 86\% and complete selectivity towards GC. The continuous expel of NH 3 from reaction the mixture avoided formation of ammonia complex with CuO-ZnO catalyst. As a result of this, CuO-ZnO catalyst could be recycled up to three times without losing its initial activity.}, keywords = {Co-precipitation (CP), Glycerol, Glycerol carbonate, Oxalate gel (OG)}, issn = {0019-4522}, doi = {10.1016/j.jics.2021.100090}, author = {Charate, Shrinivas and Shinde, Suhas and Kondawar, Sharda and Desai, Uday and Wadgaonkar, Prakash and Rode, Chandrashekhar} } @article {47691, title = {Separation of a diastereomeric diol pair using the mechanical properties of crystals}, journal = {Crystengcomm}, volume = {23}, year = {2021}, month = {OCT}, pages = {7056-7060}, type = {Article}, abstract = {We report the separation of a (2S,3R/S)-3-ethyl-1-phenylhex-5-ene-2,3-diol (ephd) diastereomeric pair with visually indistinguishable acicular morphologies based on their mechanical responses, which is found to be more efficient than conventional separation methods. Furthermore, the molecular crystals of (2S,3R)-ephd show elastic deformation, while (2S,3S)-ephd fractures in a brittle manner under similar conditions.}, doi = {10.1039/d1ce01055g}, author = {Gamidi, Rama Krishna and Dandawate, Monica and Choudhury, Rahul and Tothadi, Srinu and Nangia, Ashwini and Reddy, D. Srinivasa} } @article {47345, title = {Significance of secondary forces toward improving the charge carrier mobility of Isoindigo based conjugated small molecules}, journal = {Chemical Physics Letters}, volume = {774}, year = {2021}, month = {JUL}, pages = {138621}, type = {Article}, abstract = {

The charge carrier mobility of conjugated small molecules (CSMs) depends on the intermolecular interactions and morphology. Herein, we report the synthesis of CSMs having different side chains. Hydrogen bonding, lipophilic imbalance and van der Waals interactions are imparted through the asymmetric substitution of Isoindigo. The secondary forces impact thin film morphology, and charge carrier mobility. The CSMs having van der Waals interaction further shows higher charge carrier mobility as a function of improved morphology, and increased temperature. The highest mobility of 0.15 cm2/Vs has been achieved for CSMs with van der Waals interaction.

}, keywords = {Conjugated small molecules, Isoindigo, mobility, OFET, Secondary force}, issn = {0009-2614}, doi = {10.1016/j.cplett.2021.138621}, author = {Dharmapurikar, Satej S. and Kashmir, Arulraj Arul and Kumari, Tanya and Kalalawe, Virbhadra and Kanetkar, Maruti and Chini, Mrinmoy Kumar} } @article {47442, title = {Spatio-temporal resolution of taxonomic and functional microbiome of Lonar soda lake of India reveals metabolic potential for bioremediation}, journal = {Chemosphere}, volume = {264}, year = {2021}, month = {FEB}, pages = {128574}, type = {Article}, abstract = {

Lonar Lake, India; a hypersaline and hyperalkaline extremophilic ecosystem having a unique microbial population has been rarely explored for bioremediation aspects. MinION-based shotgun sequencing was used to comprehensively compare the microbial diversity and functional potential of xenobiotic degradation pathways with seasonal changes. Proteobacteria and Firmicutes were prevalent bacterial phyla in the pre-monsoon and post-monsoon samples. Functional analysis from SEED-subsystem and KEGG database revealed 28 subsystems and 18 metabolic pathways for the metabolism of aromatic compounds and xenobiotic biodegradation respectively. Occurrence of N-phenyl alkanoic, benzoate, biphenyl, chloroaromatic, naphthalene, and phenol degradation genes depicted varied abundance in the pre-monsoon and post-monsoon samples. Further, KEGG analysis indicated nitrotoluene degradation pathway (ko00633) abundant in post-monsoon samples, and the benzoate degradation pathway (ko00362) predominant in 19LN4S (pre-monsoon) than 18LN7S (post-monsoon) samples. The abundant genes for benzoate degradation were pcaI: 3-oxoadipate CoA-transferase, alpha subunit, pcaH: protocatechuate 3,4-dioxygenase, beta subunit, and pcaB: 3-carboxy-cis, cis-muconate cycloisomerase, and 4-oxalocrotonate tautomerase. This metagenomic study provides a unique blueprint of hitherto unexplored xenobiotic biodegradation genes/pathways in terms of seasonal variations in the Lonar Lake, and warrants active exploitation of microbes for bioremediation purposes.

}, doi = {10.1016/j.chemosphere.2020.128574}, author = {Chakraborty, Jaya and Rajput, Vinay and Sapkale, Vibhavari and Kamble, Sanjay and Dharne, Mahesh} } @article {47693, title = {Structure-property correlation of halogen substituted benzothiazole crystals}, journal = {Journal of Molecular Structure}, volume = {1243}, year = {2021}, month = {NOV }, pages = {130765}, type = {Article}, abstract = {We have synthesized 3 benzothiazole crystals (1-3) based on existing knowledge of combining flexibility and optical properties towards achieving applications for flexible optoelectronics. However, one crystal was found to be elastically bendable and was found to comply necessary packing features for elasticity. Other two crystals do not obey packing features for elasticity hence they are brittle in nature. Further, Hirshfeld analysis illustrates that elastic crystal 1 possess more number of weak and dispersive interactions compared to other crystals. These interactions were instrumental in invoking elasticity. Moreover, crystals 1-3 were found to be fluorescent as well at specific excitation wavelengths. Therefore, among these crystals, particularly crystal 1 is considered as more promising candidate for flexible optoelectronics. (C) 2021 Elsevier B.V. All rights reserved.}, keywords = {Benzothiazole crystals, Elasticity, Halogen bond, mechanical properties}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2021.130765}, author = {Thekkeppat, Nipun P. and Singla, Labhini and Tothadi, Srinu and Das, Priyadip and Choudhury, Angshuman Roy and Ghosh, Soumyajit} } @article {47729, title = {Structure-tailored non-noble metal-based ternary chalcogenide nanocrystals for pt-like electrocatalytic hydrogen production}, journal = {ChemSusChem}, volume = {14}, year = {2021}, month = {AUG }, pages = {3074-3083}, type = {Article}, abstract = {A facile microwave-assisted strategy was employed to synthesize Ni3Bi2S2 nanocrystals. Variation in the synthesis conditions tuned the composition of monoclinic and orthorhombic phases of Ni3Bi2S2. The electrochemical hydrogen evolution activity of the catalyst with highest percentage of monoclinic phase demonstrated a negligible onset potential of only 24 mV close to that of state-of-the-art Pt/C with an overpotential as low as 88 mV. Density functional theory calculations predicted the monoclinic phase exhibit the lowest adsorption free energy corresponding to hydrogen adsorption (Delta GadsH*) and, therefore, the highest hydrogen evolution activity amongst the considered phases. The quasi-2D structure of monoclinic phase facilitated an increased charge-transfer between Ni and Bi, favoring the downward shift of the d-band center to enhance the catalytic activity.}, keywords = {charge transfer, electrocatalysis, hydrogen evolution reaction, Nanomaterials, ternary chalcogenides}, issn = {1864-5631}, doi = {10.1002/cssc.202100967}, author = {Sarkar, Shreya and Rawat, Abhishek and Das, Tisita and Gaboardi, Mattia and Chakraborty, Sudip and Vinod, C. P. and Peter, Sebastian C.} } @article {47429, title = {Study of combinatorial drug synergy of novel acridone derivatives with temozolomide using in-silico and in-vitro methods in the treatment of drug-resistant glioma}, journal = {Frontiers in Oncology}, volume = {11}, year = {2021}, month = {MAR}, pages = {625899}, type = {Article}, abstract = {

Drug resistance is one of the critical challenges faced in the treatment of Glioma. There are only limited drugs available in the treatment of Glioma and among them Temozolomide (TMZ) has shown some effectiveness in treating Glioma patients, however, the rate of recovery remains poor due to the inability of this drug to act on the drug resistant tumor sub-populations. Hence, in this study three novel Acridone derivative drugs AC2, AC7, and AC26 have been proposed. These molecules when combined with TMZ show major tumor cytotoxicity that is effective in suppressing growth of cancer cells in both drug sensitive and resistant sub-populations of a tumor. In this study a novel mathematical model has been developed to explore the various drug combinations that may be useful for the treatment of resistant Glioma and show that the combinations of TMZ and Acridone derivatives have a synergistic effect. Also, acute toxicity studies of all three acridone derivatives were carried out for 14 days and were found safe for oral administration of 400 mg/kg body weight on albino Wistar rats. Molecular Docking studies of acridone derivatives with P-glycoprotein (P-gp), multiple resistant protein (MRP), and O6-methylguanine-DNA methyltransferase (MGMT) revealed different binding affinities to the transporters contributing to drug resistance. It is observed that while the Acridone derivatives bind with these drug resistance causing proteins, the TMZ can produce its cytotoxicity at a much lower concentration leading to the synergistic effect. The in silico analysis corroborate well with our experimental findings using TMZ resistant (T-98) and drug sensitive (U-87) Glioma cell lines and we propose three novel drug combinations (TMZ with AC2, AC7, and AC26) and dosages that show high synergy, high selectivity and low collateral toxicity for the use in the treatment of drug resistant Glioma, which could be future drugs in the treatment of Glioblastoma.

}, keywords = {acridone derivatives, drug combinations, drug resistance, Glioma, mathematical model, synergy index}, issn = {2234-943X}, doi = {10.3389/fonc.2021.625899}, author = {Chakravarty, Malobika and Ganguli, Piyali and Murahari, Manikanta and Sarkar, Ram Rup and Peters, Godefridus Johannes and Mayur, Y. C.} } @article {47108, title = {Synthesis and cell imaging applications of fluorescent mono/di/tri-heterocyclyl-2,6-dicyanoanilines (vol 27, pg 979, 2017)}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {32}, year = {2021}, month = {JAN }, pages = {127737}, type = {Correction}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2020.127737}, author = {Pisal, Mahesh M. and Annadate, Ritesh A. and Athalye, Meghana C. and Kumar, Deepak and Chavan, Subhash P. and Sarkar, Dhiman and Borate, Hanumant B.} } @article {47672, title = {Total synthesis of a hypothetical macroketone of migrastatin}, journal = {European Journal of Organic Chemistry}, volume = {2021}, year = {2021}, month = {JUN }, pages = {3050-3053}, type = {Article}, abstract = {Danishefsky{\textquoteright}s macroketone, a simplified analogue of natural product Migrastatin, is one of the lead compounds with potent cancer cell migration inhibition potential. Different biological assays suggest fascin protein as the potential target. Although it was indicated through X-ray co-crystallography where the concerned macroketone analogue was found to bind in the actin-binding sites of fascin, there was a structural discrepancy, as the X-ray co-crystal structure suggested an E-olefin along with inversion of methyl stereochemistry from that of Danishefsky{\textquoteright}s macroketone. Here, we have accomplished the total synthesis of the {\textquoteleft}hypothetical macroketone{\textquoteright} for the first time. The TiCl4 mediated vinylogous Mukaiyama aldol reaction is the key step in present synthesis.}, keywords = {Hypothetical mecroketon, Metastasis, Migrastatin, RCM, vinylogous Mukaiyama aldol reaction (VMAR)}, issn = {1434-193X}, doi = {10.1002/ejoc.202100484}, author = {Choudhury, Rahul and Reddy, D. Srinivasa} } @article {47604, title = {Transition of a deep eutectic solution to aqueous solution: a dynamical perspective of the dissolved solute}, journal = {Journal of Physical Chemistry Letters}, volume = {12}, year = {2021}, month = {SEP}, pages = {8784-8789}, type = {Article}, abstract = {Disruption of the deep eutectic solvent (DES) nanostructure around the dissolved solute upon addition of water is investigated by polarization-selective two-dimensional infrared spectroscopy and molecular dynamics simulations. The heterogeneous DES nanostructure around the solute is partially retained up to 41 wt \% of added water, although water molecules are gradually incorporated in the solute{\textquoteright}s solvation shell even at lower hydration levels. Beyond 41 wt \%, the solute is observed to be preferentially solvated by water. This composition denotes the upper hydration limit of the deep eutectic solvent above which the solute senses an aqueous solvation environment. Interestingly, our results indicate that the transition from a deep eutectic solvation environment to an aqueous one around the dissolved solute can happen at a hydration level lower than that reported for the {\textquoteleft}{\textquoteleft}water in DES{\textquoteright}{\textquoteright} to {\textquoteleft}{\textquoteleft}DES in water{\textquoteright}{\textquoteright} transition.}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.1c02118}, author = {Sakpal, Sushil S. and Deshmukh, Samadhan H. and Chatterjee, Srijan and Ghosh, Deborin and Bagchi, Sayan} } @article {47046, title = {Unbiased phenotype-based screen identifies therapeutic agents selective for metastatic prostate cancer}, journal = {Frontiers in Oncology}, volume = {10}, year = {2021}, month = {MAR }, pages = {594141}, type = {Article}, abstract = {

In American men, prostate cancer is the second leading cause of cancer-related death. Dissemination of prostate cancer cells to distant organs significantly worsens patients{\textquoteright} prognosis, and currently there are no effective treatment options that can cure advanced-stage prostate cancer. In an effort to identify compounds selective for metastatic prostate cancer cells over benign prostate cancer cells or normal prostate epithelial cells, we applied a phenotype-based in vitro drug screening method utilizing multiple prostate cancer cell lines to test 1,120 different compounds from a commercial drug library. Top drug candidates were then examined in multiple mouse xenograft models including subcutaneous tumor growth, experimental lung metastasis, and experimental bone metastasis assays. A subset of compounds including fenbendazole, fluspirilene, clofazimine, niclosamide, and suloctidil showed preferential cytotoxicity and apoptosis towards metastatic prostate cancer cells in vitro and in vivo. The bioavailability of the most discerning agents, especially fenbendazole and albendazole, was improved by formulating as micelles or nanoparticles. The enhanced forms of fenbendazole and albendazole significantly prolonged survival in mice bearing metastases, and albendazole-treated mice displayed significantly longer median survival times than paclitaxel-treated mice. Importantly, these drugs effectively targeted taxane-resistant tumors and bone metastases - two common clinical conditions in patients with aggressive prostate cancer. In summary, we find that metastatic prostate tumor cells differ from benign prostate tumor cells in their sensitivity to certain drug classes. Taken together, our results strongly suggest that albendazole, an anthelmintic medication, may represent a potential adjuvant or neoadjuvant to standard therapy in the treatment of disseminated prostate cancer.

}, keywords = {bone, carcinoma, drug-screen, Metastasis, Prostate}, issn = {2234-943X}, doi = {10.3389/fonc.2020.594141}, author = {Chung, Ivy and Zhou, Kun and Barrows, Courtney and Banyard, Jacqueline and Wilson, Arianne and Rummel, Nathan and Mizokami, Atsushi and Basu, Sudipta and Sengupta, Poulomi and Shaikh, Badaruddin and Sengupta, Shiladitya and Bielenberg, Diane R. and Zetter, Bruce R.} } @article {47450, title = {Unprecedented stability in Au@Co core-shell bimetallic catalyst supported on SBA-15 (Au@Co/SBA-15) for atmospheric pressure CO hydrogenation}, journal = {Materials Today Sustainability }, volume = {13}, year = {2021}, month = {SEP}, pages = {100068}, type = {Article}, abstract = {

Bimetallic nanoparticles demonstrating\ synergistic effect\ (electronic or geometric modification) often show distinct chemical and physical properties compared with the parent metals. In catalysis, this provides opportunities to engineer solid materials with appreciable activity, selectivity, and stability. In the present study, we have synthesized Au@Co core{\textendash}shell bimetallic nanoparticles by colloidal synthesis approach with a focus to study and explore the synergistic effect between Au and Co in Au@Co\ bimetallic catalyst\ supported on SBA-15 on\ Fischer Tropsch\ (FT) reaction. The deactivation of catalyst is a significant drawback in CO hydrogenation (syngas conversion/FT synthesis), and the present study provides the design of a new material, which resists the surface cobalt oxide formation\ and inactive coke formation and gives efficient CO conversion with high stability.

}, doi = {10.1016/j.mtsust.2021.100068}, author = {Jain, P. and Chimote, M. and Vinod, C. P.} } @article {47105, title = {Unveiling the roles of lattice strain and descriptor species on pt-like oxygen reduction activity in Pd-Bi catalysts}, journal = {ACS Catalysis}, volume = {11}, year = {2021}, month = {JAN}, pages = {800-808}, type = {Article}, abstract = {

A facile non-template-assisted mechanical ball milling technique was employed to generate a PdBi alloy catalyst. The induced lattice strain upon the milling time caused a shift of the d-band center, thereby enhancing the oxygen reduction reaction (ORR) catalytic activity. Additionally, the Pd-O reduction potential and adsorbed OH coverage used as descriptors stipulated the cause of the enhanced ORR activity upon the increased milling interval. Redox properties of surface Pd are directly correlated with a positive shift in the Pd-O reduction potential and OH surface coverage. Hence, by deconvoluting the lattice strain and the role of the descriptor species we achieved a catalyst system with a specific activity 5.4X higher than that of commercial Pt/C, as well as an improved durability. The experimental observation is well-corroborated by a theoretical simulation done by inducing strain to the system externally.

}, keywords = {charge-transfer, electrocatalysis, fuel cell, Lattice strain, oxygen reduction, Pt-like activity}, issn = {2155-5435}, doi = {10.1021/acscatal.0c03415}, author = {Sarkar, Shreya and Ramarao, S. D. and Das, Tisita and Das, Risov and Vinod, C. P. and Chakraborty, Sudip and Peter, Sebastian C.} } @article {47679, title = {Upgrading lignin derived monomers over basic supported metal catalysts}, journal = {Fuel}, volume = {306}, year = {2021}, month = {DEC}, pages = {121588}, type = {Article}, abstract = {Catalytic upgradation of aromatic monomers derived from lignin depolymerization is of high interest for the production of sustainable fuels and chemicals. Basic support has potential to provide advantages of better substrate-support interaction and reduced coke formation. Hence, we report the effect of various basic supports for metal catalysts (Pt, Pd, Ru) on the upgradation of phenol, guaiacol and eugenol. The complete hydrogenation product is achieved due to the strong interaction of the substrate with catalyst. Phenol is converted (55\%) into cyclohexanol (49\% yield) with low loading of Pt catalyst (1 wt\%), supported by the higher TON of 1 wt\% Pt/NaX (TON = 14844) than 3 wt\% Pt/NaX (TON = 5128). Effect of basic support with moderate (NaX) and strong (CHT) basic strengths are corelated for the higher cyclohexanone formation. Presence of strong basic sites and higher TON of 3 wt\% C-HT (TON = 6806) directs the significant substrate-support interaction. Catalytic activity and recyclability are supported by the comparable performance of recycle runs and characterizations of the fresh and spent catalysts.}, keywords = {aromatic monomers, Hydrogenation, lignin, Solid bases, supported metal catalyst, Upgradation}, issn = {0016-2361}, doi = {10.1016/j.fuel.2021.121588}, author = {Chaudhary, Richa and Dhepe, Paresh L.} } @article {48112, title = {3D x-ray microtomography investigations on the bimodal porosity and high sulfur impregnation in 3D carbon foam for Li-S battery application}, journal = {Journal of Physics-Energy}, volume = {4}, year = {2022}, month = {JAN }, pages = {014003}, type = {Article}, abstract = {

Lithium-sulfur (Li-S) batteries, regarded as one of the most promising alternatives to current state-of-the-art rechargeable Li-ion battery technologies, have received tremendous attention as potential candidates for next-generation portable electronics and the rapidly advancing electric vehicle market. However, substantial capacity decay, miserable cycle life, and meagre stability remain critical challenges. More specifically, shuttling of polysulfide (Li2S (x) (3 \< x \<= 8)) species severely hinders the cycle performance resulting in capacity fade and cycling instability. In the present work, a highly conducting three-dimensional (3D) carbon nanofiber (CNF) foam has been synthesized using the lyophilization method followed by thermal pyrolysis. The highly porous foam materials have a bimodal porosity distribution in the nano and micro regime and were successfully investigated to serve as a potential host for sulfur species intended for Li-S battery application. 3D x-ray microtomography was employed to estimate the nature of sulfur impregnation and distribution in the 3D porous networks. On utilizing the final product as cathode material, sulfur impregnated carbonized CNF foam and modified the separator with functionalized multiwalled carbon nanotubes delivered a specific capacity of similar to 845 mAh g(-1) at 100 mA g(-1).

}, keywords = {bimodal porosity, CNF foam, Li-S battery, microtomography}, issn = {2515-7655}, doi = {10.1088/2515-7655/ac4c34}, author = {Thripuranthaka, M. and Chaturvedi, Vikash and Dwivedi, Pravin Kumari and Torris, Arun and Shelke, V. Manjusha} } @article {48221, title = {Algal biomass-loaded hydrogel scaffolds as a biomimetic platform with antibacterial and wound healing activities}, journal = {ACS Applied Polymer Materials}, volume = {4}, year = {2022}, month = {AUG}, pages = {5800-5812}, type = {Article}, abstract = {

The confluence of hydrogel scaffolds and dried algal biomass (AB), consisting of all the bioactive compounds, offers the possibility to facilitate wound healing while simultaneously instilling antibacterial benefits. For this purpose, a single-step synthesis of algal (Chlorella sorokiniana) biomass-loaded hydrogel scaffolds (AHS) was achieved. C. sorokiniana has been used in different areas for several years and has proved attractive to the pharmaceutical and cosmetic industries. Of note, the presence of phytochemicals and various bioactive compounds provides an added health benefit. Hitherto, we report AHS with accelerated wound healing along with potent anti-inflammatory and antibacterial properties. AHS consisting of different concentrations of AB was applied for 14 days on excisional wounds in mice. Microscopic analyses, assessment of proinflammatory and anti-inflammatory cytokines, and histological studies were performed to investigate wound healing. These scaffolds were extensively characterized and studied using Fourier transform infrared, X-ray diffraction, Raman, atomic force microscopy, transmission electron microscopy, scanning electron microscopy, swelling, rheological, thermal, and mechanical analyses. AHS have excellent biocompatibility in addition to significant antibacterial activity against Escherichia coli (99\%) and Staphylococcus aureus (98\%). We believe that the as-synthesized AHS have the potential to broaden the arsenal of more effective wound healing processes along with antibacterial activities.

}, keywords = {antibacterial activity, Biomass, hydrogel scaffold, microalgae, wound Healing}, issn = {2637-6105}, doi = {10.1021/acsapm.2c00722}, author = {Agarwal, Aakanksha and Kumar, Arun and Garg, Piyush and Chakraborty, Arnab and Verma, Ranjan and Sarwat, Maryam and Gupta, Ajay and Sasmal, Pijus K. and Verma, Yogesh Kumar and Chowdhury, Chiranjit and Mukherjee, Monalisa} } @article {47766, title = {Alternative splicing modulation mediated by G-quadruplex structures in MALAT1 lncRNA}, journal = {Nucleic Acids Research}, volume = {50}, year = {2022}, month = {JAN}, pages = {378-396}, type = {Article}, abstract = {MALAT1, an abundant lncRNA specifically localized to nuclear speckles, regulates alternative-splicing (AS). The molecular basis of its role in AS remains poorly understood. Here, we report three conserved, thermodynamically stable, parallel RNAG-quadruplexes (rG4s) present in the 3{\textquoteright} region of MALAT1 which regulates this function. Using rG4 domain-specific RNA-pull-down followed by mass-spectrometry, RNA-immuno-precipitation, and imaging, we demonstrate the rG4 dependent localization of Nucleolin (NCL) and Nucleophosmin (NPM) to nuclear speckles. Specific G-to-A mutations that abolish rG4 structures, result in the localization loss of both the proteins from speckles. Functionally, disruption of rG4 in MALAT1 phenocopies NCL knockdown resulting in altered pre-mRNA splicing of endogenous genes. These results reveal a central role of rG4s within the 3{\textquoteright} region of MALAT1 orchestrating AS.}, issn = {0305-1048}, doi = {10.1093/nar/gkab1066}, author = {Ghosh, Arpita and Pandey, Satya Prakash and Ansari, Asgar Hussain and Sundar, Jennifer Seematti and Singh, Praveen and Khan, Yasmeen and Ekka, Mary Krishna and Chakraborty, Debojyoti and Maiti, Souvik} } @article {48379, title = {Association-dissociation dynamics of ionic electrolytes in low dielectric medium}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {JAN}, pages = {239-248}, type = {Article}, abstract = {

Ionic electrolytes are known to form various complexes which exist in dynamic equilibrium in a low dielectric medium. However, structural characterization of these complexes has always posed a great challenge to the scientific community. An additional challenge is the estimation of the dynamic association-dissociation time scales (lifetime of the complexes), which are key to the fundamental understanding of ion transport. In this work, we have used a combination of infrared absorption spectroscopy, two-dimensional infrared spectroscopy, molecular dynamics simulations, and density functional theory calculations to characterize the various ion complexes formed by the thiocyanate-based ionic electrolytes as a function of different cations in a low dielectric medium. Our results demonstrate that thiocyanate is an excellent vibrational reporter of the heterogeneous ion complexes undergoing association-dissociation dynamics. We find that the ionic electrolytes exist as contact ion pairs, dimers, and clusters in a low dielectric medium. The relative ratios of the various ion complexes are sensitive to the cations. In addition to the interactions between the thiocyanate anion and the countercation, the solute-solvent interactions drive the dynamic equilibrium. We have estimated the association-dissociation dynamics time scales from two-dimensional infrared spectroscopy. The exchange time scale involving the cluster is faster than that between a dimer and an ion pair. Moreover, we find that the dynamic equilibrium between the cluster and another ion complex is correlated to the solvent fluctuations.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.1c08613}, author = {Ghosh, Deborin and Sakpal, Sushil S. and Chatterjee, Srijan and Deshmukh, Samadhan H. and Kwon, Hyejin and Kim, Yung Sam and Bagchi, Sayan} } @article {48419, title = {Behavioral and proteomic studies reveal methylglyoxal activate pathways associated with alzheimer{\textquoteright}s disease}, journal = {ACS Pharmacology \& Translational Science}, volume = {6}, year = {2022}, month = {DEC}, pages = {65{\textendash}75}, type = {Article}, abstract = {

Diabetes is one of the major risk factors for Alzheimer{\textquoteright}s disease (AD) development. The role of elevated levels of glucose, methylglyoxal (MGO), and advanced glycation end products (AGEs) in the pathogenesis of AD is not well understood. In this pursuit, we studied the role of methylglyoxal in the pathogenesis of AD in rat models. The elevated plus-maze (EPM) behavioral study indicated that MGO induces anxiety. Treatment of telmisartan (RAGE expression inhibitor) and aminoguanidine (MGO quencher) attenuated MGO induced anxiety. Further, hippocampal proteomics demonstrated that MGO treated rats differentially regulate proteins involved in calcium homeostasis, mitochondrial functioning, and apoptosis, which may affect neurotransmission and neuronal plasticity. The hippocampal tau phosphorylation level was increased in MGO treated rats, which was reduced in the presence of aminoguanidine and telmisartan. The plasma fructosamine level was increased upon MGO treatment. Hippocampal histochemistry showed vascular degeneration and neuronal loss upon MGO treatment. This study provides mechanistic insight into the role of MGO in the diabetes-associated development of AD.

}, doi = {10.1021/acsptsci.2c00143}, author = {Patil, Gouri and Kulsange, Shabda and Kazi, Rubina and Chirmade, Tejas and Kale, Vaikhari and Mote, Chandrashekhar and Aswar, Manoj and Koratkar, Santosh and Agawane, Sachin and Kulkarni, Mahesh} } @article {48373, title = {Biological macromolecule chitosan grafted co-polymeric composite: bio-adsorption probe on cationic dyes}, journal = {Polymer Bulletin}, volume = {79}, year = {2022}, month = {NOV}, pages = {9441-9455}, type = {Article}, abstract = {

Chitosan biological macromolecule is a versatile polymer; chemical modification has been carried out that lead to the formation of chitosan grafted polymers composites (Chito-g-PC). We proposed synthesis of six various Chito-g-PC as sorbents for toxic dyes. A novel graft copolymerization method based on radical polymerization with vinyl monomer like acrylic acid, acrylamide, N-isopropylacrylamide, methacrylic acid and polyacrylonitrile were utilized in order to address the large amount of swelling at four different pH buffers solution. The effect of initiator and monomer concentration, time and temperature on \% grafting and \% grafting efficiency were performed. Comparative characterization of Chito and Chito-g-PC were evaluated by SEM, XRD and FTIR, as well as solubility characteristics of the composites were determined by various pH buffer solution. Cationic toxic dyes Malachite green (MG) and Methylene blue (MB) were selected as the sorbet, and Chito-g-PC were used as biosorbents. Thermodynamic analysis showed that the sorption process was spontaneous and endothermic with an increased randomness. The sorption experiments were realized with six different Chito-g-PC for MG and MB at various pH.

}, keywords = {Acrylamide, acrylic acid, Bio sorbent, Chitosan biological macromolecule}, issn = {0170-0839}, doi = {10.1007/s00289-021-03954-w}, author = {Khairkar, Shyam R. and Pansare, V. Shubham and Shedge, Amol A. and Chhatre, Shraddha and Kulal, Dnyaneshwar K. and Patil, Vishwanath R. and Pansare, V. Amol} } @article {48346, title = {Blue fluorescence of cyano-tryptophan predicts local electrostatics and hydrogen bonding in biomolecules}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {DEC}, pages = {10732-10740}, type = {Article}, abstract = {

Cyano-tryptophan is an unnatural fluorescent amino acid that emits in the visible region. Along with the structural similarity with tryptophan, the unique photophysical properties of this fluorophore make it an ideal probe for biophysical research. Herein, combining fluorescence spectroscopy, infrared spectroscopy, and molecular dynamics simulations, we show that the cyano-tryptophan{\textquoteright}s emission energy quantifies the underlying bond-specific noncovalent interactions in terms of the electric field. We further report the use of fluorophore{\textquoteright}s emission energy to predict its hydrogen bond characteristics. We demonstrate that combining experiments with molecular dynamics simulations can provide the hydrogen bonding status of the nitrile moiety. In addition, we report a method to differentiate between aqueous and nonaqueous hydrogen-bonding partners. Using a phenomenological approach, we demonstrate that the presence of the cyano-indole moiety is responsible for the distinct correlations between the fluorophore{\textquoteright}s emission and the electrostatic forces on the nitrile bond. As indole is a privileged scaffold for both native amino acids and nucleobases, cyano-indoles will have many multifaceted applications.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.2c05848}, author = {Haldar, Tapas and Chatterjee, Srijan and Alam, Md Nirshad and Maity, Pradip and Bagchi, Sayan} } @article {48009, title = {cis-aziridine synthon based synthetic investigation for tamiflu employing horner-wadsworth-emmons reaction}, journal = {European Journal of Organic Chemistry}, volume = {2022}, year = {2022}, month = {JUL }, pages = {e202200384}, type = {Article}, abstract = {

Synthetic investigations to achieve a novel intermediate of Tamiflu by using cis-aziridine as a chiral building block, which is readily synthesized from (D)-mannitol as a renewable starting material, has been presented. The present approach utilizes the intramolecular Horner-Wadsworth-Emmons reaction as the key step for the synthesis of Tamiflu. On the other hand, diene containing allylic aziridine framework is found to be inefficient to furnish the six-membered core skeleton of Tamiflu through ring-closing metathesis reaction.

}, keywords = {Aziridine, cyclization, HWE reaction, Metathesis, Tamiflu}, issn = {1434-193X}, doi = {10.1002/ejoc.202200384}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Gonnade, Rajesh G.} } @article {48233, title = {Comparative analysis and structural modeling of elaeis oleifera FAD2, a fatty acid desaturase involved in unsaturated fatty acid composition of american oil palm}, journal = {Biology-Basel}, volume = {11}, year = {2022}, month = {APR}, pages = {529}, type = {Article}, abstract = {

Simple Summary Palm oil has become the world{\textquoteright}s most important vegetable oil in terms of production quantity, and its overall demand is exponentially growing with the global population. The fatty acid composition and particularly the oleic/linoleic acid ratio are major factors influencing palm oil quality. In this study, we focused on FAD2, a fatty acid desaturase enzyme involved in the desaturation and conversion of oleic acid to linoleic acid in Elaeis oleifera, identified through in silico annotation analysis. Our phylogenetic and comparative studies revealed two SNP markers, SNP278 and SNP851, significantly correlated with the oleic/linoleic acid contents. Our study provides fundamental insights into the mechanism of fatty acids synthesis in oil palm and could support the application of molecular biology techniques to enhance the enzymatic activity and substrate affinity of EoFAD2. American oil palm (Elaeis oleifera) is an important source of dietary oil that could fulfill the increasing worldwide demand for cooking oil. Therefore, improving its production is crucial and could be realized through breeding and genetic engineering approaches aiming to obtain high-yielding varieties with improved oil content and quality. The fatty acid composition and particularly the oleic/linoleic acid ratio are major factors influencing oil quality. Our work focused on a fatty acid desaturase (FAD) enzyme involved in the desaturation and conversion of oleic acid to linoleic acid. Following the in silico identification and annotation of Elaeis oleifera FAD2, its molecular and structural features characterization was performed to better understand the mechanistic bases of its enzymatic activity. EoFAD2 is 1173 nucleotides long and encodes a protein of 390 amino acids that shares similarities with other FADs. Interestingly, the phylogenetic study showed three distinguished groups where EoFAD2 clustered among monocotyledonous taxa. EoFAD2 is a membrane-bound protein with five transmembrane domains presumably located in the endoplasmic reticulum. The homodimer organization model of EoFAD2 enzyme and substrates and respective substrate-binding residues were predicted and described. Moreover, the comparison between 24 FAD2 sequences from different species generated two interesting single-nucleotide polymorphisms (SNPs) associated with the oleic/linoleic acid contents.

}, keywords = {FAD2, Fatty acids, in silico annotation, linoleic acid ratio, oil palm, oleic, SNP, structural modeling}, doi = {10.3390/biology11040529}, author = {Ben Ayed, Rayda and Chirmade, Tejas and Hanana, Mohsen and Khamassi, Khalil and Ercisli, Sezai and Choudhary, Ravish and Kadoo, Narendra and Karunakaran, Rohini} } @article {48152, title = {Comparative study of polycaprolactone electrospun fibers and casting films enriched with carbon and nitrogen sources and their potential use in water bioremediation}, journal = {Membranes}, volume = {12}, year = {2022}, month = {MAR}, pages = {327}, type = {Article}, abstract = {

Augmenting bacterial growth is of great interest to the biotechnological industry. Hence, the effect of poly (caprolactone) fibrous scaffolds to promote the growth of different bacterial strains of biological and industrial interest was evaluated. Furthermore, different types of carbon (glucose, fructose, lactose and galactose) and nitrogen sources (yeast extract, glycine, peptone and urea) were added to the scaffold to determinate their influence in bacterial growth. Bacterial growth was observed by scanning electron microscopy; thermal characteristics were also evaluated; bacterial cell growth was measured by ultraviolet-visible spectrophotometry at 600-nm. Fibers produced have an average diameter between 313 to 766 nm, with 44\% superficial porosity of the scaffolds, a glass transition around similar to 64 degrees C and a critical temperature of similar to 338 degrees C. The fibrous scaffold increased the cell growth of Escherichia coli by 23\% at 72 h, while Pseudomonas aeruginosa and Staphylococcus aureus increased by 36\% and 95\% respectively at 48 h, when compared to the normal growth of their respective bacterial cultures. However, no significant difference in bacterial growth between the scaffolds and the casted films could be observed. Cell growth depended on a combination of several factors: type of bacteria, carbon or nitrogen sources, casted films or 3D scaffolds. Microscopy showed traces of a biofilm formation around 3 h in culture of P. aeruginosa. Water bioremediation studies showed that P. aeruginosa on poly (caprolactone)/Glucose fibers was effective in removing 87\% of chromium in 8 h.

}, keywords = {bacterial growth, carbon source, electrospinning, nitrogen source, poly (caprolactone)}, doi = {10.3390/membranes12030327}, author = {Alejandra Pompa-Monroy, Daniella and Leticia Iglesias, Ana and Gulam Dastager, Syed and Namdeo Thorat, Meghana and Olivas-Sarabia, Amelia and Valdez-Castro, Ricardo and Angelica Hurtado-Ayala, Lilia and Manuel Cornejo-Bravo, Jose and Lizeth Perez-Gonzalez, Graciela and Jesus Villarreal-Gomez, Luis} } @article {48067, title = {Coordination flexibility aided CO2-specific gating in an iron isonicotinate MOF}, journal = {Chemistry-an Asian Journal}, volume = {17}, year = {2022}, month = {FEB}, pages = {e202101305}, type = {Article}, abstract = {

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal-organic framework (MOF), (Fe(4-PyC)(2) . (OH). The framework showed CO2-specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF {\textquoteleft} s physisorptive porosity towards CO2, CH4, and N-2 was investigated; it adsorbed only CO2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO2 pressure opening the gate for a sharp increase in CO2 uptake at 333 mmHg (At 298 K, the CO2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF {\textquoteleft} s potential for CO2/N-2 and CO2/CH4 gas separation aided by this gating. IAST model reveals that the CO2/N-2 selectivity jumps from 325 to 3131 when the gate opens, while the CO2/CH4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M2+-isonicotinate MOFs (M=Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

}, keywords = {CO2 capture, flexible MOF, gating, Isonicotinic}, issn = {1861-4728}, doi = {10.1002/asia.202101305}, author = {Singh, Himan Dev and Nandi, Shyamapada and Chakraborty, Debanjan and Singh, Kirandeep and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article {48070, title = {Covalent organic framework with electrodeposited copper nanoparticles - a desirable catalyst for the Ullmann coupling reaction}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {JUL}, pages = {15647-15656}, type = {Article}, abstract = {

A covalent organic framework is a porous covalently-linked polymeric assembly built from molecular lego blocks, the monomers. A COF{\textquoteright}s high surface area, ordered pores, and intrinsic low density makes it a perfect heterogeneous catalyst component. Dispersing catalytic metal nanoparticles into the porous COF matrix in a {\textquoteleft}capping-agent-free{\textquoteright} manner can aid the maximal utilization of the active sites. To generate single-site catalysts, metals have been anchored to dense supports, or metal ions have been coordinated to the porous organic framework. The latter has superior atom efficiency and a substrate diffusion advantage. Stably nestling neutral metallic clusters into open-framework supports with no specifically strong binding groups requires a different approach. If infused from extremely dilute electrolytes, metal clusters can be nanoconfined into electrically activated COFs. At low-loadings, it can resemble a single-site catalyst with high atom efficiency. Herein, we report the larger scale synthesis of IISERP-COF15 and electrochemical loading of copper nanoparticles into its pores at loadings as low as 3.34 wt\%. We employed classical Ullmann reactions to adjudge its activity. Typical turnover numbers for the catalysts reported in the literature are approximately 50-100. A Cu@COF shows high activity with a very low catalyst loading of 0.25 mol\% (TON around similar to 300-350 vs. 4 for neat CuCl2 center dot 2H(2)O (homogeneous catalyst) and turnover frequency (similar to 15-17 h(-1))). We recycled it for up to 3 cycles. Furthermore, we report a multi-fold Ullmann reaction producing an unreported hexaaldehyde to demonstrate the latitude of the catalyst. Our work points to the potential of a dilutely loaded metal@COF as a mimic of the single-site catalyst for synthesizing valuable C-O linked molecules. Our findings from computational modeling shed light on the role of the COF as an active nanoporous support for Ullmann C-O coupling.

}, issn = {2050-7488}, doi = {10.1039/d2ta01326f}, author = {Chandran, Chandana and Singh, Himan Dev and Leo, Liya S. and Shekhar, Pragalbh and Rase, Deepak and Chakraborty, Debanjan and Vinod, Chathakudath P. and Vaidhyanathan, Ramanathan} } @article {47768, title = {Deciphering the sensing of alpha-amyrin acetate with hs-DNA: a multipronged biological probe}, journal = {RSC Advances}, volume = {12}, year = {2022}, month = {JAN}, pages = {1238-1243}, type = {Article}, abstract = {In this study, we focus on the biomimetic development of small molecules and their biological sensing with DNA. The binding of herring sperm deoxyribonucleic acid (hs-DNA) with naturally occurring bioactive small molecule alpha-amyrin acetate (alpha-AA), a biomimetic - isolated from the leaves of Ficus (F.) arnottiana is investigated. Collective information from various imaging, spectroscopic and biophysical experiments provides evidence that alpha-AA is a minor groove sensor of hs-DNA and preferentially binds to the A-T-rich regions. Interactions of different concentrations of small molecule alpha-AA with hsDNA were evaluated via various analytical techniques such as UV-Vis, circular dichroism (CD) and fluorescence emission spectroscopy. Fluorescence emission spectroscopy results suggest that alpha-AA decreases the emission level of hsDNA. DNA minor groove sensor Hoechst 33258 and intercalative sensor EB, melting transition analysis (T-M) and viscosity analysis clarified that alpha-AA binds to hs-DNA via a groove site. Biophysical chemistry and molecular docking studies show that hydrophobic interactions play a major role in this binding. The present research deals with a natural product biosynthesis-linked chemical-biology interface sensor as a biological probe for alpha-AA: hs-DNA.}, doi = {10.1039/d1ra07195e}, author = {Pansare, V. Amol and Shedge, Amol A. and Sonawale, Maryappa C. and Pansare, V. Shubham and Mahakal, Akshay D. and Khairkar, Shyam R. and Chhatre, Shraddha Y. and Kulal, Dnyaneshwar K. and Patil, Vishwanath R.} } @article {48224, title = {Design, synthesis of anticancer and anti-inflammatory 4-(1-methyl-1H-indol-3-yl)-6-(methylthio) pyrimidine-5-carbonitriles}, journal = {Synthetic Communications}, volume = {52}, year = {2022}, month = {MAR }, pages = {733-744}, type = {Article}, abstract = {

A novel series of 4-(1-methyl-1H-indol-3-yl)-6-(methylthio) pyrimidine-5-carbonitriles (4a-i) was synthesized and evaluated for anticancer potential against cell lines for breast cancer. Compounds 4b, 4e, and 4h exhibited prominent cytotoxicity against human breast carcinoma MCF-7 cell line with GI(50 )of 2.0, 0.5, and 0.5 mu M, respectively. Molecular docking study against EGFR tyrosine kinase could provide valuable insights into the plausible mechanism of action. The compounds could bind with significantly high binding affinity and their binding affinity scores could correlate well with the observed anticancer activity. Furthermore, compounds 4a, 4c, 4e, 4g, and 4i exhibited significant inflammatory activities as well which could expand the therapeutic domain of this novel series.

}, keywords = {Anti-inflammatory, Anticancer, Antioxidant, Indole, pyrimidine}, issn = {0039-7911}, doi = {10.1080/00397911.2022.2048860}, author = {Bhale, Pravin S. and Chavan, V. Hemant and Shringare, Sadanand N. and Khedkar, Vijay M. and Tigote, Radhakrishna M. and Mali, Nikita N. and Jadhav, Tukaram D. and Kamble, Nitin B. and Kolat, Swati P. and Bandgar, Babasaheb P. and Patil, Harshal S.} } @article {48180, title = {DNA binding, antitubercular, antibacterial and anticancer studies of newly designed piano-stool ruthenium(ii) complexes}, journal = {Dalton Transactions}, volume = {51}, year = {2022}, month = {NOV }, pages = {16371-16382}, type = {Article}, abstract = {

The chemotherapeutic potential of ruthenium(ii) complexes has recently attracted researchers{\textquoteright} interest as antibacterial and anticancer agents. In this study, two novel half-sandwich imine-based Ru complexes ([Ru(p-cymene)Cl(L-1)][PF6] (Ru-1) and [Ru(p-cymene)Cl(L-2)][PF6] (Ru-2)) were reported for their deoxyribonucleic acid (DNA) binding and antitubercular, antibacterial, and anticancer activities. The molecular structure of Ru-2 was obtained by single-crystal X-ray crystallography. DNA interaction studies were conducted by UV-Vis absorbance and fluorescence spectral titration which gave rise to DNA binding constants (K-b) of 1.32 x 10(6) and 1.82 x 10(6) for Ru-1 and Ru-2, respectively and the Stern-Volmer binding constant (K-SV) values for Ru-1 and Ru-2 were 1.7763 x 10(4) M-1 and 7.6 x 10(3) M-1, respectively. The in vitro antitubercular activity was evaluated against Mycobacterium tuberculosis H37Ra. The antibacterial potential of both the Ru-complexes was examined against Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria. The half-maximal inhibitory concentration (IC50) values for the antitubercular activity of Ru-1 and Ru-2 were 4.87 +/- 1.32 mu M and 5.78 +/- 0.54 mu M, respectively. A cytotoxic study of these complexes was performed against the human breast cancer cell line (MCF-7) and the human embryonic kidney cell line (HEK293) (normal cells). The study revealed meaningful activity of the Ru-1 complex against (cancer) MCF-7 cells, while the viability of HEK293 (normal) cells in the presence of Ru-2 was higher as compared to a reference drug 5FU. We suggest that these kinds of Ru-complexes could have potential for application in metallopharmaceuticals.

}, issn = {1477-9226}, doi = {10.1039/d2dt02577a}, author = {Navale, Govinda and Singh, Sain and Agrawal, Sonia and Ghosh, Chandrachur and Choudhury, Angshuman Roy and Roy, Partha and Sarkar, Dhiman and Ghosh, Kaushik} } @article {48041, title = {Does viscosity drive the dynamics in an alcohol-based deep eutectic solvent?}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {OCT }, pages = {8331-8337}, type = {Article}, abstract = {

Deep eutectic solvents, consisting of heterogeneous nano-domains of hydrogen-bonded networks, have evolved into a range of viscous fluids that find applications in several fields. As viscosity is known to influence the dynamics of other neoteric solvents like ionic liquids, understanding the effect of viscosity on deep eutectic solvents is crucial to realize their full potential. Herein, we combine polarization-selective pump-probe spectroscopy, two-dimensional infrared spectroscopy, and molecular dynamics simulations to elucidate the impact of viscosity on the dynamics of an alcohol-based deep eutectic solvent, ethaline. We compare the solvent fluctuation and solute reorientation time scales in ethaline with those in ethylene glycol, an ethaline constituent. Interestingly, we find that the solute{\textquoteright}s reorientation apparently scales the bulk viscosity of the solvent, but the same is not valid for the overall solvation dynamics. Using the variations in the estimated intercomponent hydrogen bond lifetimes, we show that a dissolved solute does not sense the bulk viscosity of the deep eutectic solvent; instead, it senses domain-specific local viscosity determined by the making and breaking of the hydrogen bond network. Our results indicate that understanding the domain-specific local environment experienced by the dissolved solute is of utmost importance in deep eutectic solvents.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.2c06521}, author = {Chatterjee, Srijan and Deshmukh, Samadhan H. and Bagchi, Sayan} } @article {48396, title = {Dual-functional 3-acetyl-2,5-dimethylthiophene additive-assisted crystallization control and trap state passivation for high- performance perovskite solar cells}, journal = {ACS Applied Energy Materials}, volume = {5}, year = {2022}, month = {DEC }, pages = {14701-14711}, type = {Article}, abstract = {

Defect-mediated charge recombination and successive degradation mainly lag the performance of perovskite solar cells (PSCs). Insufficiency or evaporation of organic cations leaves behind the undercoordinated Pb2+ ions, which act as severe charge recombination centers. Herein, theoretical and experimental insights into crystallization control and defect passivation of MAPbI3 perovskite by the dual-functional 3-acetyl-2,5-dimethylthiophene (ADT) molecule are pre-sented. Density functional theory calculations show that both functional groups of ADT possessing different interaction energies could interact with PbI2. The carbonyl group in ADT shows the dominant interaction with Pb2+ forming an intermediate product that might decrease the crystallization rate. Further, the coordinate bonding between ADT and uncoordinated Pb2+ ions in perovskite leads to defect passivation. The 0.6\% ADT-modified PSCs possess an average power conversion efficiency (PCE) of 18.22 +/- 0.80\% and the highest PCE of 19.03\%, whereas the pristine PSCs exhibit an average PCE of 16.23 +/- 1.32\% and the highest PCE of 17.47\%. Furthermore, the modified PSCs maintain 80\% of the initial PCE up to 650 h during storage at ambient conditions (RH = 35 +/- 5\%). The present study shows that the simultaneous crystalization control and defect passivation achieved via an ADT additive engineering approach could be an efficient strategy to enhance the PCE and stability of PSCs.

}, keywords = {3-acetyl-2, 5-dimethylthiophene, additive engineering, crystallization control, defect passivation, Perovskite solar cells}, issn = {2574-0962}, doi = {10.1021/acsaem.2c01881}, author = {Saykar, Nilesh G. and Iqbal, Muzahir and Pawar, Mahendra and Chavan, Kashinath T. and Mahapatra, Santosh K.} } @article {47719, title = {The effects of cis and trans butenedioic acid on the physicochemical behavior of lumefantrine}, journal = {Crystengcomm}, volume = {24}, year = {2022}, month = {JAN }, pages = {156-168}, type = {Article}, abstract = {The present work investigates the effects of cis and trans butenedioic acid isomers (maleic acid and fumaric acid) on the crystallinity and pharmaceutical behavior of lumefantrine. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), attenuated total reflectance infrared spectroscopy (ATR-IR), solid-state nuclear magnetic resonance spectroscopy (ss-NMR), and single-crystal X-ray diffraction (SC-XRD) studies were employed. Lumefantrine-fumaric acid crystallized as a salt in the monoclinic space group P2(1)/c. In comparison, DSC and PXRD showed the formation of a co-amorphous solid with maleic acid. Complete proton transfer with a strong ionic interaction led to crystalline salt formation with the trans isomer, whereas weaker/fewer hydrogen bonds with the cis isomer of butenedioic acid led to a co-amorphous salt. The in vitro dissolution of both salts resulted in a similar 2.6-2.7-fold improvement in dissolution rate when compared to that of the crystalline lumefantrine. The crystalline and co-amorphous salts were stable under accelerated stability conditions (40 +/- 2 degrees C and 75 +/- 5\% RH) for one month.}, doi = {10.1039/d0ce01709d}, author = {Tomar, Devendrasingh and Lodagekar, Anurag and Gunnam, Anilkumar and Allu, Suryanarayana and Chavan, Rahul B. and Tharkar, Minakshi and Ajithkumar, T. G. and Nangia, Ashwini K. and Shastri, Nalini R.} } @article {48018, title = {Electrocatalytic alcohol oxidation by a molecular iron complex}, journal = {Faraday Discussions}, volume = {234}, year = {2022}, month = {MAY}, pages = {42-57}, type = {Article}, abstract = {

An efficient electrochemical method for the selective oxidation of alcohols to their corresponding aldehydes/ketones using a biomimetic iron complex, [(bTAML)Fe-III-OH2](-), as the redox mediator in an undivided electrochemical cell with inexpensive carbon and nickel electrodes using water as an oxygen source is reported. The substrate scope also includes alcohols that contain O and N heteroatoms in the scaffold, which are well tolerated under these reaction conditions. Mechanistic studies show the involvement of a high-valent Fe-V(O) species, [(bTAML)Fe-V(O)](-), formed via PCET (overall 2H(+)/2e(-)) from [(bTAML)Fe-III-OH2](-) at 0.77 V (vs. Fc(+)/Fc). Moreover, electrokinetic studies of the oxidation of C-H bonds indicate a second-order reaction, with the C-H abstraction by Fe-V(O) being the rate-determining step. The overall mechanism, studied using linear free energy relationships and radical clocks, indicates a {\textquoteleft}{\textquoteleft}net hydride{\textquoteright}{\textquoteright} transfer, leading to the oxidation of the alcohol to the corresponding aldehyde or ketone. When the reaction was carried out at pH \> 11, the reaction could be carried out at a similar to 500 mV lower potential than that at pH 8, albeit with reduced reaction rates. The reactive intermediate involved at pH \> 11 is the corresponding one-electron oxidized [(bTAML)Fe-IV(O)](2-) species.

}, issn = {1359-6640}, doi = {10.1039/d1fd00074h}, author = {Kuiry, Himangshu and Das, Debasree and Das, Soumadip and Chakraborty, Soham and Chandra, Bittu and Sen Gupta, Sayam} } @article {48410, title = {Elliptically birefringent chemically tuned liquid crystalline nanocellulose composites for photonic applications}, journal = {Journal of Molecular Liquids}, volume = {366}, year = {2022}, month = {NOV }, pages = {120326}, type = {Article}, abstract = {

Cellulose nanocrystals (CNCs) based photonic materials are one of the promising materials in the recent trends. The liquid crystalline behavior of the CNCs can be tailored to different advanced applications. The proposed research investigates the potential of CNCs as an optically active material. CNCs were tuned to hydroxypropyl nano cellulose (HPNC) with the degree of substitution 1.39. The prepared liquid crystalline HPNC were dispersed in various concentrations of monomethyl ether of polyethylene glycol to get waterborne materials with specific optical anisotropy. The extraction, modification, and morphology of the CNCs were investigated using NMR (Nuclear Magnetic Resonance), TEM (Transmission Electron Microscopy), XRD (X-ray Powder Diffraction), and FESEM (Field Emission Scanning Electron Microscopy) analysis. The prepared HPNC was analyzed using a hot stage POM (Polarized Optical Microscope) for optical anisotropy. The thermal stability of prepared CNCs and HPNC was also investigated. Upon optimization using rheology and POM, it was found that at the ratio of 1:1, HPNC (5 wt\%) and mPEG (40 wt\%) had the most distinct optical properties. The potential of the prepared materials can be further explored in sensing, smart coating, and security materials. (C) 2022 Elsevier B.V. All rights reserved.

}, keywords = {bagasse, Cellulose nanocrystals, Elliptical birefringence, liquid crystals, optical anisotropy}, issn = {0167-7322}, doi = {10.1016/j.molliq.2022.120326}, author = {Singh, Shiva and Bhardwaj, Shakshi and Verma, Chhavi and Chhajed, Monika and Balayan, Kajal and Ghosh, Kaushik and Maji, Pradip K.} } @article {48191, title = {Enantioselective Au(I)/Au(III) redox catalysis enabled by chiral (P,N)-ligands}, journal = {Journal of the American Chemical Society}, volume = {144}, year = {2022}, month = {APR}, pages = {7089-7095}, type = {Article}, abstract = {

Presented herein is the first report of enantioselective Au(I)/Au(III) redox catalysis, enabled by a newly designed hemilabile chiral (P,N)-ligand (ChetPhos). The potential of this concept has been demonstrated by the development of enantioselective 1,2-oxyarylation and 1,2-aminoarylation of alkenes which provided direct access to the medicinally relevant 3-oxy- and 3-aminochromans (up to 88\% yield and 99\% ee). DFT studies were carried out to unravel the enantiodetermining step, which revealed that the stronger trans influence of phosphorus allows selective positioning of the substrate in the C-2-symmetric chiral environment present around nitrogen, imparting a high level of enantioselectivity.

}, issn = {0002-7863}, doi = {10.1021/jacs.2c02799}, author = {Chintawar, Chetan C. and Bhoyare, Vivek W. and Mane, Manoj V. and Patil, Nitin T.} } @article {48137, title = {Enantioselective Cu(I)-catalyzed borylative cyclization of enone-tethered cyclohexadienones and mechanistic insights}, journal = {Nature Communications}, volume = {13}, year = {2022}, month = {FEB }, pages = {854}, type = {Article}, abstract = {

Rapidly building molecular structures with both elements of complexity and flexibility is a key goal of organic synthesis. Here the authors show a tandem copper-catalyzed beta-borylation/Michael addition on prochiral enone-tethered 2,5-cyclohexadienones, to generate bicyclic borylated products in high yield and enantioselectivity. The catalytic asymmetric borylation of conjugated carbonyls followed by stereoselective intramolecular cascade cyclizations with in situ generated chiral enolates are extremely rare. Herein, we report the enantioselective Cu(I)-catalyzed beta-borylation/Michael addition on prochiral enone-tethered 2,5-cyclohexadienones. This asymmetric desymmetrization strategy has a broad range of substrate scope to generate densely functionalized bicyclic enones bearing four contiguous stereocenters with excellent yield, enantioselectivity, and diastereoselectivity. One-pot borylation/cyclization/oxidation via the sequential addition of sodium perborate reagent affords the corresponding alcohols without affecting yield and enantioselectivity. The synthetic potential of this reaction is explored through gram-scale reactions and further chemoselective transformations on products. DFT calculations explain the requirement of the base in an equimolar ratio in the reaction, as it leads to the formation of a lithium-enolate complex to undergo C-C bond formation via a chair-like transition state, with a barrier that is 22.5 kcal/mol more favourable than that of the copper-enolate complex.

}, issn = {0039-7881}, doi = {10.1038/s41467-022-28288-7}, author = {Jadhav, Sandip B. and Dash, Soumya Ranjan and Maurya, Sundaram and Nanubolu, Jagadeesh Babu and Vanka, Kumar and Chegondi, Rambabu} } @article {48190, title = {Enhanced field emission behaviour from ethylene glycol mediated synthesis of 2D hexagonal SnS2 disc with nanoparticle}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {284}, year = {2022}, month = {OCT}, pages = {115865}, type = {Article}, abstract = {

Herein, octahedron and stacked 2D hexagonal disc - like nanostructures of SnS2 were obtained by hydrothermal and ethylene glycol mediated hydrothermal methods, respectively. Attempt has been made to shade light on the plausible growth mechanism. Liquid phase exfoliation followed by centrifugation process leads to presence of tiny single crystalline SnS2 nanoparticles (similar to 5 nm) on the hexagonal discs over C substrate, characterized by preferred growth along {001} direction. The observed Raman shift and enhanced intensities of A(1g) and E-g modes infer charge interactions between the SnS2 disc and C substrate. Interestingly, the SnS2-C emitter exhibited superior field emission (FE) behaviour due to the unique morphology, excellent charge transfer, and reduced work function (similar to 4.1 eV). Here the extraction of large current density of similar to 1137 mu A/cm(2) at an applied field of 3.72 V/mu m, with good emission current stability. The present strategy is beneficial to design architectured morphology for multi-functionality.

}, keywords = {2D layered materials, Field Emission (FE), SnS2, SnS2 on C}, issn = {0921-5107}, doi = {10.1016/j.mseb.2022.115865}, author = {Mutadak, Pallavi R. and Chaudhari, Nilima S. and Gadhave, Dattatraya C. and Rajput, Parikshit K. and Kolekar, Sadhu K. and Late, Dattatray J. and More, Mahendra A. and Warule, Sambhaji S.} } @article {48073, title = {Glycal mediated synthesis of piperidine alkaloids: fagomine, 4-epi-fagomine, 2-deoxynojirimycin, and an advanced intermediate, iminoglycal}, journal = {RSC Advances}, volume = {12}, year = {2022}, month = {NOV}, pages = {33021-33031}, type = {Article}, abstract = {

Glucal and galactal are transformed into 2-deoxyglycolactams, which are important building blocks in the synthesis of biologically active piperidine alkaloids, fagomine and 4-epi-fagomine. In one of the strategies, reduction of 2-deoxyglycolactam-N-Boc carbonyl by lithium triethylborohydride (Super-Hydride (R)) has been exploited to generate lactamol whereas reduction followed by dehydration was utilized as the other strategy to functionalize the C-1-C-2 bond in the iminosugar substrate. The strategies provide the formal synthesis of 2-deoxynojirimycin, nojirimycin and nojirimycin B. DFT studies were carried out to determine the reason for the failure of the formation of the 2-deoxygalactonojirimycin derivative. Further, DFT studies suggest that phenyl moieties of protecting groups and lone pairs of oxygen in carbamate group plays a vital role in deciphering the conformational space of the reaction intermediates and transition-state structures through cation-pi or cation-lone pair interactions. The influence of these interactions is more pronounced at low temperature when the entropy factor is small.

}, doi = {10.1039/d2ra05224e}, author = {Chand, Hemender R. and Tiwari, Mritunjay K. and Bhattacharya, Asish K.} } @article {48361, title = {G-protein coupled purinergic P2Y12 receptor interacts and internalizes Tau(RD)-mediated by membrane-associated actin cytoskeleton remodeling in microglia}, journal = {European Journal of Cell Biology}, volume = {101}, year = {2022}, month = {APR}, pages = {151201}, type = {Article}, abstract = {

In Alzheimer{\textquoteright}s disease, the microtubule-associated protein, Tau misfolds to form aggregates and filaments in the intra- and extracellular region of neuronal cells. Microglial cells are the resident brain macrophage cells involved in constant surveillance and activated by the extracellular deposits. Purinergic receptors are involved in the chemotactic migration of microglial cells towards the site of inflammation. From our recent study, we have observed that the microglial P2Y12 receptor is involved in phagocytosis of full-length Tau species such as monomers, oligomers and aggregates by actin-driven chemotaxis. This study shows the interaction of repeat-domain of Tau (Tau(RD)) with the microglial P2Y12 receptor and the corresponding residues for interaction have been analysed by various in-silico approaches. In the cellular studies, Tau(RD) was found to interact with microglial P2Y12R and induces its cellular expression confirmed by co-immunoprecipitation and western blot analysis. Furthermore, the P2Y12R-mediated Tau(RD) internalization has demonstrated activation of microglia with an increase in the Iba1 level, and Tau(RD) becomes accumulated at the peri-nuclear region for the degradation. Similarly, immunofluorescence microscopic studies emphasized that Tau(RD) is phagocytosed by microglial P2Y12R via the membrane-associated actin remodeling as filopodia extension. Upon internalization, we have demonstrated the P2Y12R signaling-mediated degradation of accumulated Tau(RD) by lysosomal pathway. Altogether, microglial P2Y12R interacts with Tau(RD) and mediates directed migration and activation for its internalization and degradation.

}, keywords = {Alzheimer{\textquoteright}s disease, Internalization, microglia, P2Y12R, Phagocytosis, Tau(RD)}, issn = {0171-9335}, doi = {10.1016/j.ejcb.2022.151201}, author = {Chidambaram, Hariharakrishnan and Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {47803, title = {G-protein coupled purinergic P2Y12 receptor interacts and internalizes TauRD-mediated by membrane-associated actin cytoskeleton remodeling in microglia}, journal = {European Journal of Cell Biology}, volume = {101}, year = {2022}, month = {APR}, pages = {151201}, type = {Article}, abstract = {In Alzheimer{\textquoteright}s disease, the microtubule-associated protein, Tau misfolds to form aggregates and filaments in the intra- and extracellular region of neuronal cells. Microglial cells are the resident brain macrophage cells involved in constant surveillance and activated by the extracellular deposits. Purinergic receptors are involved in the chemotactic migration of microglial cells towards the site of inflammation. From our recent study, we have observed that the microglial P2Y12 receptor is involved in phagocytosis of full-length Tau species such as monomers, oligomers and aggregates by actin-driven chemotaxis. This study shows the interaction of repeat-domain of Tau (TauRD) with the microglial P2Y12 receptor and the corresponding residues for interaction have been analysed by various in-silico approaches. In the cellular studies, TauRD was found to interact with microglial P2Y12R and induces its cellular expression confirmed by co-immunoprecipitation and western blot analysis. Furthermore, the P2Y12R-mediated TauRD internalization has demonstrated activation of microglia with an increase in the Iba1 level, and TauRD becomes accumulated at the peri-nuclear region for the degradation. Similarly, immunofluorescence microscopic studies emphasized that TauRD is phagocytosed by microglial P2Y12R via the membrane-associated actin remodeling as filopodia extension. Upon internalization, we have demonstrated the P2Y12R signaling-mediated degradation of accumulated TauRD by lysosomal pathway. Altogether, microglial P2Y12R interacts with TauRD and mediates directed migration and activation for its internalization and degradation.}, keywords = {Alzheimer{\textquoteright}s disease, Internalization, microglia, P2Y12R, Phagocytosis, Tau}, issn = {0171-9335}, doi = {https://doi.org/10.1016/j.ejcb.2022.151201}, url = {https://www.sciencedirect.com/science/article/pii/S0171933522000048}, author = {Chidambaram, Hariharakrishnan and Das, Rashmi and Chinnathambi, Subashchandrabose} } @article {48089, title = {Heterostructure from heteromixture: unusual OER activity of FeP and CoP nanostructures on physical mixing}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {NOV}, pages = {22354-22362}, type = {Article}, abstract = {

Heterointerfaces generated by inter-domain interactions on a nanoscale play a critical role in altering the activity of an electrocatalyst towards an electrochemical process. Heterointerfaces affect the surface characteristics, electronic structure, and physicochemical properties of a nanomaterial. Herein, we report an FeP-CoP heterostructure prepared by simple physical mixing of FeP and CoP nanostructures showing a remarkable performance towards water oxidation in comparison to their individual monometallic phosphides. FeP mixed with 20 wt\% CoP shows a low overpotential (eta(10)) of 220 mV as compared to FeP (eta(10), 325 mV). Furthermore, a high current density of 1.37 A cm(-2) and mass activity of 18 987 A g(M)(-1) were also achieved at 500 mV overpotential in 1.0 M KOH. The physical mixture shows immense stability for 200 h to achieve a high current density of 200 mA cm(-2). Meanwhile the potentiostatic performance of FeP at 200 mA cm(-2) decreases to an extent of 50\% in 40 h. A full cell arrangement employing this catalyst as the anode material requires 1.56 V to attain a current density of 10 mA cm(-2). Various characterization techniques, control experiments and theoretical studies indicate that the formation of heterointerfaces between the nano-domains of FeP and CoP results in charge transfer between Fe and Co metal sites. In addition, an oxygenated surface at the metal phosphide interface favours the sorption kinetics of intermediates involved in the reaction leading to low energy barriers in the potential determining and other steps, thus showing improved performance towards water oxidation.

}, issn = {2050-7488}, doi = {10.1039/d2ta04296g}, author = {Bhutani, Divya and Maity, Sisir and Chaturvedi, Shashank and Chalapathi, Divya and Waghmare, V. Umesh and Narayana, Chandrabhas and Prabhakaran, Vinod C. and Muthusamy, Eswaramoorthy} } @article {48198, title = {High-alkaline water-splitting activity of mesoporous 3D heterostructures: an amorphous-shell@crystalline-core nano-assembly of Co-Ni-phosphate ultrathin-nanosheets and V- doped cobalt-nitride nanowires}, journal = {Advanced Science}, volume = {9}, year = {2022}, month = {AUG}, pages = {2201311}, type = {Article}, abstract = {

Introducing amorphous and ultrathin nanosheets of transition bimetal phosphate arrays that are highly active in the oxygen evolution reaction (OER) as shells over an electronically modulated crystalline core with low hydrogen absorption energy for an excellent hydrogen evolution reaction (HER) can boost the sluggish kinetics of the OER and HER in alkaline electrolytes. Therefore, in this study, ultrathin and amorphous cobalt-nickel-phosphate (CoNiPOx) nanosheet arrays are deposited over vanadium (V)-doped cobalt-nitride (V-3\%-Co4N) crystalline core nanowires to obtain amorphous-shell@crystalline-core mesoporous 3D-heterostructures (CoNiPOx@V-Co4N/NF) as bifunctional electrocatalysts. The optimized electrocatalyst shows extremely low HER and OER overpotentials of 53 and 270 mV at 10 mA cm(-2), respectively. The CoNiPOx@V-3\%-Co4N/NF (+/-) electrolyzer utilizing the electrocatalyst as both anode and cathode demonstrates remarkable overall water-splitting activity, requiring a cell potential of only 1.52 V at 10 mA cm(-2), 30 mV lower than that of the RuO2/NF (+)/20\%-Pt/C/NF (-) electrolyzer. Such impressive bifunctional activities can be attributed to abundant active sites, adjusted electronic structure, lower charge-transfer resistance, enhanced electrochemically active surface area (ECSA), and surface- and volume-confined electrocatalysis resulting from the synergistic effects of the crystalline V-3\%-Co4N core and amorphous CoNiPOx shells boosting water splitting in alkaline media.

}, keywords = {core-shell, hydrogen productions, metal nitrides, metal phosphates, synergistic effect, water-splitting}, doi = {10.1002/advs.202201311}, author = {Singh, Thangjam Ibomcha and Maibam, Ashakiran and Cha, Dun Chan and Yoo, Sunghoon and BabaRao, Ravichandar and Lee, Sang Uck and Lee, Seunghyun} } @article {48109, title = {Histone deacetylase-6 modulates Tau function in Alzheimer{\textquoteright}s disease}, journal = {Biochimica Et Biophysica Acta-Molecular Cell Research}, volume = {1869}, year = {2022}, month = {AUG}, pages = {119275}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD), one of the major tauopathies, is multifactorial with a massive demand for disease modifying treatments rather than symptom management. An AD-affected neuron shows Tau depositions generated due to overload on the proteostasis machinery of the cell and/or abnormal post-translational modifications on Tau protein. Loss of memory or dementia is the most significant concern in AD, occurring due to the loss of neurons and the connections between them. In a healthy brain, neurons interact with the environment and each other through extensions and migratory structures. It can thus be safe to assume that Tau depositions affect these growth structures in neurons. A Histone Deacetylase, HDAC6, has shown elevated levels in AD while also demonstrating direct interaction with the Tau protein. HDAC6 interacts with multiple proteins in the cell and is possibly involved in various signalling pathways. Its deacetylase activity has been a point of controversy in AD; however other functional domains remain unexplored. This review highlights the beneficial potential of HDAC6 in AD in mediating both Tau proteostasis and cytoskeletal rewiring for the neuritic extensions through its Ubiquitin Binding domain (HDAC6 ZnF UBP).

}, keywords = {Actin, Cytoskeleton, HDAC6, Microtubules, Proteostasis, Tau, ZnF UBP domain}, issn = {0167-4889}, doi = {10.1016/j.bbamcr.2022.119275}, author = {Qureshi, Tazeen and Chinnathambi, Subashchandrabose} } @article {48010, title = {Honeycomb boron carbon nitride as high-performance anode material for li-ion batteries}, journal = {ChemNanoMat}, volume = {8}, year = {2022}, month = {JUL}, pages = {e202200056}, type = {Article}, abstract = {

3D Porous carbon-based materials are well known for their excellent mechanical and electrochemical properties for various energy storage applications including Li-ion Battery (LIB) anodes. However, their commercial application is limited due to their low theoretical specific capacity. Heteroatom doping in carbonaceous networks proved an efficient way to modify the surface properties, which considerably improves the Li intake capacity and Li diffusion in porous carbon materials. In this work, we have synthesized 3D honeycomb boron carbon nitride (HBCN) from boric acid, glucose, and cyanamide. Silica nanoparticles (SiO2 NPs) are used as structure-directing agents to replicate well-organized honeycomb structures. HBCN possesses a high specific surface area (SSA) of similar to 597 m(2) g(-1), with a uniform porosity distribution, low charge transfer resistance, and steady Li flux. When analyzed as an anode material for LIB, HBCN demonstrated an excellent specific capacity of similar to 652 mAhg(-1) and 408 mAhg(-1) at an input current density of 100 mAg(-1) and 1 Ag-1 respectively and an energy density of 227 Wh kg(-1) at 1 C rate in a full cell LIB. These results indicate that the doping of B and N hetero atoms is significantly advantageous for LIBs application.

}, keywords = {3D-Architecture, Heteroatom Doping, High-Performance Anode, Honeycomb boron carbon nitride (HBCN), Li-ion battery}, issn = {2199-692X}, doi = {10.1002/cnma.202200056}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Patrike, Apurva and Yadav, Poonam and Shelke, V, Manjusha} } @article {48171, title = {How far is {\textquoteleft}{\textquoteleft}Bulk Water{\textquoteright}{\textquoteright} from interfaces? depends on the nature of the surface and what we measure}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {FEB}, pages = {1125-1135}, type = {Article}, abstract = {

Using systematic molecular dynamics (MD) simulations, we revisit the question: At what distance from an interface do the properties of {\textquoteleft}{\textquoteleft}bulk water{\textquoteright}{\textquoteright} get recovered? We have considered three different kinds of interfaces: nonpolar (hydrophobic; isooctane-water interface), charged (negative; AOT bilayer), and polar (zwitterionic; POPC bilayer). In order to interrogate the extent of perturbation of the interfacial water molecules as a function of the distance from the interface, we utilize a diverse range of structural and dynamical parameters. To capture the structural perturbations, we look into local density (translational order), local tetrahedral order parameter, and dipolar orientation of the water molecules. We also explore the anisotropic diffusion of the water molecules in the direction perpendicular to the interface as well as the planar diffusion parallel to the interface in a distance dependent manner. In addition, the orientational time correlation functions have been computed to understand the extent of slowdown in the rotational dynamics. As expected, the electrostatic field emanating from the charged AOT interface seems to have the highest long-range effect on the orientational order and dynamics of the water molecules, whereas specific interactions like hydrogen bonding and electrostatic interaction lead to significant trapping and kinetic slowdown for both AOT and POPC (zwitterionic) very close to the interface. Our analysis highlights that not only the length-scale of perturbation depends on the nature of the interfaces and specific interactions but also the type of water property that we measure/calculate. Different water properties seem to have widely different length-scale of perturbation. Orientational order parameters seem to be perturbed to a much longer length-scale as compared to translational order parameters. The global orientational order of water can be perturbed even up to similar to 4-5 nm near the negatively charged AOT surface in the absence of any extra electrolyte. This observation has significant implication toward the interpretation of experimental measurements as well since different spectroscopic techniques would probe different parameters or water properties with possible mutual disagreement and inconsistency between different types of measurements. Thus, our study provides a broader and unifying perspective toward the aspect of {\textquoteleft}{\textquoteleft}context dependent{\textquoteright}{\textquoteright} structural and dynamical perturbation of {\textquoteleft}{\textquoteleft}interfacial water{\textquoteright}{\textquoteright}.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.1c08603}, author = {Hande, Vrushali R. and Chakrabarty, Suman} } @article {48130, title = {Hybrid material for ferric ion detection \& remediation: exceptional selectivity \& adsorption capacity with biological applications}, journal = {Microporous and Mesoporous Materials}, volume = {338}, year = {2022}, month = {JUN}, pages = {111945}, type = {Article}, abstract = {

In this work, naphthalimide derived functionalized silica material SiO2@NAPIA (2,2{\textquoteright}((((propylazanediyl)bis (methylene))bis(2,1-phenylene))bis(oxy))bis(N-(1,3-dioxo-1H-benzo[de]i soquinoline-2(3H)-yl)acetamide)) was constructed as a dual signaling and remediation material for ferric ions from a pool of 35 common ions (cations and anions) in the aqueous system. The material Cubic SiO2 shows a high surface area (1104 m2/g, pore volume (1.510 cm3/g), and pore diameter (6.3 nm) in the mesoporous range, which reduces further on functionalization to get the final material SiO2@NAPIA. The ferric ion selectivity through fluorescence quenching displays a SternVolmer quenching constant (Ksv) of 7.8 x 108 M-1 with a LOD (Limit of detection) value of 0.11 mu M for ferricion, which is 48 times lower than the USEPA (United States Environmental Protection Agency) maximum contaminant level (5.35 mu M) in drinking water. This material also shows a very high adsorption capacity (664 mg/g) for ferric ions fitting the Langmuir model isotherm with R2 = 0.99, which can be easily stripped out, and the material can be recycled. This material was also used as a sensory probe material for biosensing of ferric ions through fluorescence imaging in living organisms like Artemia salina and quantification in the real environmental sample. Furthermore, the antibacterial activity inspired by the ferric ion chelating affinity shows good potency against several Gram-negative and Gram-positive bacterial strains. The Minimum Inhibitory Concentration (MIC) \& Minimal Bactericidal Concentration (MBC) of the material against these pathogens were found to be 100 \& 200 mu g/mL respectively. This material signifies superior activity with respect to the ferric-ion selective materials known in the literature.

}, keywords = {Adsorption, Antibacterial, Biosensing, Functional material, Mesoporous silica, sensing}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2022.111945}, author = {Yadav, Sanjay and Rajpurohit, Dushyantsingh and Dash, Soumya Ranjan and Bhojani, Gopal and Chatterjee, Shruti and Paital, Alok Ranjan} } @article {47805, title = {Hydroformylation of olefins by metals other than rhodium}, journal = {Journal of Organometallic Chemistry}, volume = {960}, year = {2022}, month = {FEB}, pages = {122231}, type = {Article}, abstract = {Metal catalyzed hydroformylation of alkenes is an atom economic transformation to construct useful aldehydes and is being industrially practiced for decades. The most commonly used metal for this transformation on an industrial scale is rhodium. However, rhodium is rare, costly, and is depleting at a skyrocketing rate. Therefore, finding a suitable alternative to rhodium for metal-catalyzed hydroformylation has been on the radar of many academic and industrial researchers. This review presents the scientific advancements reported in the hydroformylation reaction using metals other than rhodium. An overview of recent progress in palladium, iridium, ruthenium, cobalt, platinum, and iron-catalyzed hydroformylation is presented. Hydroformylation of alkenes and alkynes, using syngas as well as syngas surrogates is examined. The evaluation of the current status of non-rhodium metals in hydroformylation suggests that the field is still in a nascent stage and, except cobalt, no other metal poses a significant challenge to the dominance of rhodium. Deep mechanistic understanding of rate-limiting elementary steps in the non-rhodium metals is largely missing and thus only limited success is reported. Intense research on ligand design, mechanistic understanding, and choice of non-rhodium metal precursors may change this scenario in near future.}, keywords = {aldehydes, alkenes, catalysis, Hydroformylation, Non-rhodium metals}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2021.122231}, author = {Kumar, Rohit and Chikkali, Samir H.} } @article {48210, title = {Improvement in oxygen evolution performance of NiFe layered double hydroxide grown in the presence of 1T-Rich MoS2}, journal = {ACS Applied Materials \& Interfaces}, volume = {14}, year = {2022}, month = {JUL}, pages = {31951-31961}, type = {Article}, abstract = {

NiFe layered double hydroxide (NiFe LDH) grown in the presence of MoS2 (rich in 1T phase) shows exceptional performance metrics for alkaline oxygen evolution reaction (OER) in this class of composites. The as-prepared NiFe LDH/MoS2 composite (abbreviated as MNF) exhibits a low overpotential (eta(10)) of 190 mV; a low Tafel slope of 31 mV dec(-1); and more importantly, a high stability in its performance manifested by the delivery of current output for 45 h. It is important to note that this could be achieved with an exceedingly low loading of 0.14 mg cm(-2). The mass activity of this composite (97 A g(-1)) is about 14 times greater than that of the conventional RuO2 (7 A g(-1) ) at eta = 200 mV. When normalized with respect to the total metal content, a mass activity of 1000 A g(-1) (eta = 300 mV) was achieved. Impedance analysis further reveals that the significant reduction in charge-transfer resistance and hence high current density (5 times greater as compared to NiFe LDH at eta = 300 mV) observed for MNF is associated with interfacial adsorption kinetics of intermediates (R-1). Significant enhancement in the intrinsic activity of MNF over LDH has been observed through normalization of current with the electrochemically active surface area. Computational studies suggest that the Ni centers in the composite act as the active sites for OER, which is well-corroborated with the observed postreaction appearance of Ni3+ species.

}, keywords = {Impedance, LDH-MoS2 hybrid electrocatalyst, mass activity, OER, overpotential}, issn = {1944-8244}, doi = {10.1021/acsami.2c06210}, author = {Chakraborty, Soumita and Marappa, Shivanna and Agarwal, Sakshi and Bagchi, Debabrata and Rao, Ankit and Vinod, Chathakudath P. and Peter, Sebastian C. and Singh, Abhishek and Eswaramoorthy, Muthusamy} } @article {48188, title = {Influence of support textural property on CO2 to methane activity of Ni/ SiO2 catalysts}, journal = {Applied Catalysis B-Environmental}, volume = {317}, year = {2022}, month = {NOV}, pages = {121692}, type = {Article}, abstract = {

In this work, we elucidated the role of physicochemical textural properties of inert support on the catalyst ac-tivity by impregnating Ni on ordered mesoporous silica (SBA-15 and MCM-41) and non-mesoporous silica (nMPS). The catalyst Ni/SBA-15 exhibited the best CO2 conversion (83\%) and product selectivity (99.9 \%) followed by Ni/MCM-41 and the least by Ni/nMPS. The difference in the nature of the catalyst, degree of nanoparticle distribution and nanoparticle encapsulation by different silica support were studied by N2 adsorption-desorption and X-ray photoelectron spectroscopy (XPS) experiments. The Operando Diffused Reflec-tance Infrared Fourier Transform Spectroscopy were used to understand the variance in reaction pathway which is accredited to the textural properties of the support. The SBA-15 supported Ni catalyst followed dissociative CO pathway while MCM-41 and nMPS reacted through associative formate mechanism as major pathway. These findings provide a novel perspective on CO2 hydrogenation over Ni-silica, allowing us to tune both activity and selectivity.

}, keywords = {CO2 methanation, DRIFTS, Mesoporous silica support, Textural properties}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2022.121692}, author = {Cherevotan, Arjun and Ray, Bitan and Churipard, Sathyapal R. and Kaur, Komalpreet and Gautam, Ujjal K. and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {48128, title = {Interplay of anion-pi(+) and pi(+)-pi(+) interactions in novel pyrido[2,1-a]isoquinolinium-based aiegens - substituent- and counterion-dependent fluorescence modulation and applications in live cell mitochondrial imaging}, journal = {Chemistry-A European Journal}, volume = {28}, year = {2022}, month = {JUL }, pages = {e202200632}, type = {Article}, abstract = {

Recently, the concept of anion-pi(+) interactions has witnessed unique applications in the field of AIEgen development. In this contribution, we disclose a consolidated study of a library of N-doped ionic AIEgens accessed through silver-mediated cyclization of pyridino-alkynes. A thorough photophysical, computational and crystallographic study has been conducted to rationalize the observed substituent- and counterion-dependent fluorescence properties of these luminogens. We further elucidate the prominent role of anion-pi(+) interactions, pi(+)-pi(+) interactions and other non-covalent interactions, in inhibiting the undesired ACQ effect. Finally, we have also demonstrated the application of selected AIEgens for imaging of mitochondria in live cells.

}, keywords = {1-a]isoquinolinium, AIEgens, anion-pi(+), crystal structure, mitochondrial imaging, pyrido[2}, issn = {0947-6539}, doi = {10.1002/chem.202200632}, author = {Mule, Ravindra D. and Roy, Rupam and Mandal, Koushik and Chopra, Deepak and Dutta, Tanoy and Sancheti, Shashank P. and Shinde, Popat S. and Banerjee, Somsuvra and Lal Koner, Apurba and Bhowal, Rohit and Senthilkumar, Beeran and Patil, Nitin T.} } @article {47808, title = {Inter-relationship of Histone Deacetylase-6 with Tau-cytoskeletal organization and remodeling}, journal = {European Journal of Cell Biology}, volume = {101}, year = {2022}, month = {APR}, pages = {151202}, type = {Article}, abstract = {Cytoskeletal elements are the key players in cellular integrity, structure, signalling and migration. Each cytoskeletal element comprises of properties with respect to its structure and stability, which serve a specific array of functions. These structures are highly dynamic and regulated by modulation via direct interaction or post-translational modifications. HDAC6 is a cytoplasmic deacetylase known to regulate a wide range of cellular functions either through its deacetylase activity or direct interaction via its C-terminal ZnF UBP domain. HDAC6 has been widely studied for its role in aggresome formation, which acts as a protective mechanism upon protein aggregation. HDAC6 is known to play a critical role in the regulation of cytoskeletal elements-microtubules and actin filaments. This review summarizes the regulatory role of HDAC6 in cytoskeletal remodeling and dynamics of neuronal cells and its significance in neurodegenerative diseases.}, keywords = {Actin, Cell migration, Cytoskeleton remodeling, HDAC6, Microtubules, Podosomes, ZnF UBP}, issn = {0171-9335}, doi = {10.1016/j.ejcb.2022.151202}, author = {Abhishek Ankur Balmik and Subashchandrabose Chinnathambi} } @article {48082, title = {Investigation of the captopril-insulin interaction by mass spectrometry and computational approaches reveals that captopril induces structural changes in insulin}, journal = {ACS Omega}, volume = {7}, year = {2022}, month = {JUL}, pages = {23115-23126}, type = {Article}, abstract = {

ABSTRACT: Post-translational modifications remarkably regulate proteins{\textquoteright} biological function. Small molecules such as reactive thiols, metabolites, and drugs may covalently modify the proteins and cause structural changes. This study reports the covalent modification and noncovalent interaction of insulin and captopril, an FDA-approved antihypertensive drug, through mass spectrometric and computation-based approaches. Mass spectrometric analysis shows that captopril modifies intact insulin, reduces it into its {\textquoteleft}{\textquoteleft}A{\textquoteright}{\textquoteright} and {\textquoteleft}{\textquoteleft}B{\textquoteright}{\textquoteright} chains, and covalently modifies them by forming adducts. Since captopril has a reactive thiol group, it might reduce the insulin dimer or modify it by reacting with cysteine residues. This was proven with dithiothreitol treatment, which reduced the abundance of captopril adducts of insulin A and B chains and intact Insulin. Liquid chromatography tandem mass spectrometric analysis identified the modification of a total of four cysteine residues, two in each of the A and B chains of insulin. These modifications were identified to be Cys6 and Cys7 of the A chain and Cys7 and Cys19 of the B chain. Mass spectrometric analysis indicated that captopril may simultaneously modify the cysteine residues of intact insulin or its subunits A and B chains. Biophysical studies involving light scattering and thioflavin T assay suggested that the binding of captopril to the protein leads to the formation of aggregates. Docking and molecular dynamics studies provided insights into the noncovalent interactions and associated structural changes in insulin. This work is a maiden attempt to understand the detailed molecular interactions between captopril and insulin. These findings suggest that further investigations are required to understand the long-term effect of drugs like captopril.

}, issn = {2470-1343}, doi = {10.1021/acsomega.2c00660}, author = {Ghosh, Amrita and Pawar, Aiswarya B. and Chirmade, Tejas and Jathar, Swaraj M. and Bhambure, Rahul and Sengupta, Durba and Giri, Ashok P. and Kulkarni, Mahesh J.} } @article {47809, title = {Isolation and characterization of chitosans from different fungi with special emphasis on zygomycetous dimorphic fungus benjaminiella poitrasii: evaluation of its chitosan nanoparticles for the inhibition of human pathogenic fungi}, journal = {Biomacromolecules}, year = {2022}, month = {JAN}, pages = {null}, type = {Article}, abstract = {The cell wall chitosan was extracted from fungi belonging to different taxonomic classes, namely, Benjaminiella poitrasii (Zygomycetes, dimorphic), Hanseniaspora guilliermondii, Issatchenkia orientalis, Pichia membranifaciens, and Saccharomyces cerevisiae (Ascomycetes, yeasts), and Agaricus bisporus and Pleurotus sajor-caju (Basidiomycetes). The maximum yield of chitosan was 60.89 {\textpm} 2.30 mg/g of dry mycelial biomass of B. poitrasii. The degree of deacetylation (DDA) of chitosan extracted from different fungi, as observed with 1H NMR, was in the range of 70{\textendash}93\%. B. poitrasii chitosan exhibited the highest DDA (92.78\%). The characteristic absorption bands were observed at 3450, 1650, 1420, 1320, and 1035 cm{\textendash}1 by FTIR. Compared to chitosan from marine sources (molecular weight, MW, 585 kDa), fungal chitosans showed lower MW (6.21{\textendash}46.33 kDa). Further, to improve the efficacy of B. poitrasii chitosan (Bp), nanoparticles (Np) were synthesized using the ionic gelation method and characterized by dynamic light scattering (DLS). For yeast and hyphal chitosan nanoparticles (BpYCNp and BpHCNp), the average particle size was <200 nm with polydispersity index of 0.341 {\textpm} 0.03 and 0.388 {\textpm} 0.002, respectively, and the zeta potential values were 21.64 {\textpm} 0.34 and 24.48 {\textpm} 1.58 mV, respectively. The B. poitrasii chitosans and their nanoparticles were further evaluated for antifungal activity against human pathogenic Candida albicans ATCC 10231, Candida glabrata NCYC 388, Candida tropicalis ATCC 750, Cryptococcus neoformans ATCC 34664, and Aspergillus niger ATCC 10578. BpHCNps showed lower MIC90 values (0.025{\textendash}0.4 mg/mL) than the chitosan polymer against the tested human pathogens. The study suggested that nanoformulation of fungal chitosan, which has low molecular weight and high \% DDA, is desirable for antifungal applications against human pathogens. Moreover, chitosans as well as their nanoparticles were found to be hemocompatible and are therefore safe for healthcare applications.}, doi = {10.1021/acs.biomac.1c01248}, url = {https://doi.org/10.1021/acs.biomac.1c01248}, author = {Mane, Shamala and Pathan, Ejaj and Tupe, Santosh and Deshmukh, Sneha and Kale, Deepika and Ghormade, Vandana and Chaudhari, Bhushan and Deshpande, Mukund} } @article {48117, title = {Kinetic model of GPCR-G protein interactions reveals allokairic modulation of signaling}, journal = {Biophysical Journal}, volume = {121}, year = {2022}, month = {FEB}, pages = {122}, type = {Meeting Abstract}, issn = {0006-3495}, author = {Culhane, Kelly and Gupte, Tejas and Madhugiri, Indrani and Gadgil, Chetan and Sivaramakrishnan, Sivaraj} } @article {48235, title = {Kupyaphores are zinc homeostatic metallophores required for colonization of Mycobacterium tuberculosis}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {119}, year = {2022}, month = {FEB}, pages = {e2110293119}, type = {Article}, abstract = {

Mycobacterium tuberculosis (Mtb) endures a combination of metal scarcity and toxicity throughout the human infection cycle, contributing to complex clinical manifestations. Pathogens counteract this paradoxical dysmetallostasis by producing specialized metal trafficking systems. Capture of extracellular metal by siderophores is a widely accepted mode of iron acquisition, and Mtb iron-chelating siderophores, mycobactin, have been known since 1965. Currently, it is not known whether Mtb produces zinc scavenging molecules. Here, we characterize low-molecular-weight zinc-binding compounds secreted and imported by Mtb for zinc acquisition. These molecules, termed kupyaphores, are produced by a 10.8 kbp biosynthetic cluster and consists of a dipeptide core of ornithine and phenylalaninol, where amino groups are acylated with isonitrilecontaining fatty acyl chains. Kupyaphores are stringently regulated and support Mtb survival under both nutritional deprivation and intoxication conditions. A kupyaphore-deficient Mtb strain is unable to mobilize sufficient zinc and shows reduced fitness upon infection. We observed early induction of kupyaphores in Mtb-infected mice lungs after infection, and these metabolites disappeared after 2 wk. Furthermore, we identify an Mtb-encoded isonitrile hydratase, which can possibly mediate intracellular zinc release through covalent modification of the isonitrile group of kupyaphores. Mtb clinical strains also produce kupyaphores during early passages. Our study thus uncovers a previously unknown zinc acquisition strategy of Mtb that could modulate host-pathogen interactions and disease outcome.

}, keywords = {metallophore, nutritional immunity, tuberculosis, zinc}, issn = {0027-8424}, doi = {10.1073/pnas.2110293119}, author = {Mehdiratta, Kritee and Singh, Shubham and Sharma, Sachin and Bhosale, Rashmi S. and Choudhury, Rahul and Masal, Dattatraya P. and Manocha, Alzu and Dhamale, Bhushan Dilip and Khan, Naseem and Asokachandran, Vivekanand and Sharma, Pooja and Ikeh, Melanie and Brown, Amanda C. and Parish, Tanya and Ojha, Anil K. and Michael, Joy Sarojini and Faruq, Mohammed and Medigeshi, Guruprasad R. and Mohanty, Debasisa and Reddy, D. Srinivasa and Natarajan, Vivek T. and Kamat, Siddhesh S. and Gokhale, Rajesh S.} } @article {48071, title = {Ligand dynamics time scales identify the surface-ligandinteractions in thiocyanate-capped cadmium sulfide nanocrystals}, journal = {Journal of Physical Chemistry Letters}, volume = {13}, year = {2022}, month = {APR }, pages = {3059-3065}, type = {Article}, abstract = {

The nanocrystal surface, which acts as an interface between thesemiconductor lattice and the capping ligands, plays a significant role in theattractive photophysical properties of semiconductor nanocrystals for use in awide range of applications. Replacing the long-chain organic ligands with shortinorganic variants improves the conductivity and carrier mobility of nanocrystal-based devices. However, our current understanding of the interactions betweenthe inorganic ligands and the nanocrystals is obscure due to the lack ofexperiments to directly probe the inorganic ligands. Herein, using two-dimensional infrared spectroscopy, we show that the variations in the inorganicligand dynamics within the heterogeneous nanocrystal ensemble can identifythe diversities in the inorganic ligand-nanocrystal interactions. The liganddynamics time scale in SCN-capped CdS nanocrystals identifies three distinctligand populations and provides molecular insight into the nanocrystal surface.Our results demonstrate that the SCN-ligands engage in a dynamic equilibriumand stabilize the nanocrystals by neutralizing the surface charges through both direct binding and electrostatic interaction.

}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.2c00493}, author = {Deshmukh, Samadhan H. and Chatterjee, Srijan and Ghosh, Deborin and Bagchi, Sayan} } @article {48220, title = {Lignocellulose degradation by Penicillium janthinellum enzymes is influenced by its variable secretome and a unique set of feedstock characteristics}, journal = {Bioresource Technology}, volume = {365}, year = {2022}, month = {DEC}, pages = {128129}, type = {Article}, abstract = {

Substrate characteristics and proteins that affect lignocellulose-hydrolysis by the hypercellulolytic fungus Peni-cillium janthinellum NCIM 1366 (PJ-1366) were investigated. The hydrolysis rate of PJ-1366 enzymes was very high, with upto 75 \% of the reaction being completed in initial 4 h. Comparison of the hydrolytic efficiencies on differently pretreated biomass indicated that the greatest (negative) effect was imparted by lignin, suggesting that improving ligninase activity of the PJ-1366 enzymes may help to improve hydrolysis. Larger pore sizes and higher crystallinity of substrates, which favor enzyme penetration and processive hydrolysis, positively influ-enced hydrolysis efficiency. For alkali-pretreated substrates, 16 FPU/g of PJ-1366 cellulases released the sugar -equivalent of using 10 FPU/g of a commercial biomass hydrolyzing enzyme. By correlation analysis, 41 proteins, including 20 CAZymes were identified, whose abundance in the secretome positively correlated with the cellulase activities of the culture filtrate. These proteins may be considered as the primary drivers of FPase/ CMCase/pNPGase/xylanase activity in PJ-1366.

}, keywords = {Biofuel, CAZyme, Cellulase, Penicillium, Secretome}, issn = {0960-8524}, doi = {10.1016/j.biortech.2022.128129}, author = {Christopher, Meera and Sreeja-Raju, Athiraraj and Sankar, Meena and Gokhale, Digambar Vitthal and Pandey, Ashok and Sukumaran, Rajeev K.} } @article {48154, title = {Luminescent magnesium complexes with intra- and inter-ligand charge transfer}, journal = {Chemical Communications}, volume = {58}, year = {2022}, month = {OCT}, pages = {11843-11846}, type = {Article}, abstract = {

Herein, we report two 2,2{\textquoteright}-pyridylpyrrolide (PyPyrH) ligand supported magnesium complexes (1 and 2), which demonstrate bright luminescence with a quantum yield of 22\% and 14\% in the solid state, respectively. Theoretical calculations reveal that their emissive properties originate from the intra- and inter-ligand charge transfer.

}, issn = {1359-7345}, doi = {10.1039/d2cc04142a}, author = {Kumar, Rohit and Pahar, Sanjukta and Chatterjee, Joy and Dash, Soumya Ranjan and Gonnade, Rajesh G. and Vanka, Kumar and Sen, Sakya S.} } @article {48236, title = {Machine learning-based approach to determine infection status in recipients of BBV152 (Covaxin) whole-virion inactivated SARS-CoV-2 vaccine for serological surveys}, journal = {Computers in Biology and Medicine}, volume = {146}, year = {2022}, month = {JUL}, pages = {105419}, type = {Article}, abstract = {

Data science has been an invaluable part of the COVID-19 pandemic response with multiple applications, ranging from tracking viral evolution to understanding the vaccine effectiveness. Asymptomatic breakthrough infections have been a major problem in assessing vaccine effectiveness in populations globally. Serological discrimination of vaccine response from infection has so far been limited to Spike protein vaccines since whole virion vaccines generate antibodies against all the viral proteins. Here, we show how a statistical and machine learning (ML) based approach can be used to discriminate between SARS-CoV-2 infection and immune response to an inactivated whole virion vaccine (BBV152, Covaxin). For this, we assessed serial data on antibodies against Spike and Nucleocapsid antigens, along with age, sex, number of doses taken, and days since last dose, for 1823 Covaxin recipients. An ensemble ML model, incorporating a consensus clustering approach alongside the support vector machine model, was built on 1063 samples where reliable qualifying data existed, and then applied to the entire dataset. Of 1448 self-reported negative subjects, our ensemble ML model classified 724 to be infected. For method validation, we determined the relative ability of a random subset of samples to neutralize Delta versus wild-type strain using a surrogate neutralization assay. We worked on the premise that antibodies generated by a whole virion vaccine would neutralize wild type more efficiently than delta strain. In 100 of 156 samples, where ML prediction differed from self-reported uninfected status, neutralization against Delta strain was more effective, indicating infection. We found 71.8\% subjects predicted to be infected during the surge, which is concordant with the percentage of sequences classified as Delta (75.6\%-80.2\%) over the same period. Our approach will help in real-world vaccine effectiveness assessments where whole virion vaccines are commonly used.

}, keywords = {BBV152, Covaxin, COVID-19, Ensemble methods, Infection, machine learning, SARS-CoV-2}, issn = {0010-4825}, doi = {10.1016/j.compbiomed.2022.105419}, author = {Singh, Prateek and Ujjainiya, Rajat and Prakash, Satyartha and Naushin, Salwa and Sardana, Viren and Bhatheja, Nitin and Singh, Ajay Pratap and Barman, Joydeb and Kumar, Kartik and Gayali, Saurabh and Khan, Raju and Rawat, Birendra Singh and Tallapaka, Karthik Bharadwaj and Anumalla, Mahesh and Lahiri, Amit and Kar, Susanta and Bhosale, Vivek and Srivastava, Mrigank and Mugale, Madhav Nilakanth and Pandey, C. P. and Khan, Shaziya and Katiyar, Shivani and Raj, Desh and Ishteyaque, Sharmeen and Khanka, Sonu and Rani, Ankita and Promila and Sharma, Jyotsna and Seth, Anuradha and Dutta, Mukul and Saurabh, Nishant and Veerapandian, Murugan and Venkatachalam, Ganesh and Bansal, Deepak and Gupta, Dinesh and Halami, Prakash M. and Peddha, Muthukumar Serva and Veeranna, Ravindra P. and Pal, Anirban and Singh, Ranvijay Kumar and Anandasadagopan, Suresh Kumar and Karuppanan, Parimala and Rahman, Syed Nasar and Selvakumar, Gopika and Venkatesan, Subramanian and Karmakar, Malay Kumar and Sardana, Harish Kumar and Kothari, Anamika and Parihar, Devendra Singh and Thakur, Anupma and Saifi, Anas and Gupta, Naman and Singh, Yogita and Reddu, Ritu and Gautam, Rizul and Mishra, Anuj and Mishra, Avinash and Gogeri, Iranna and Rayasam, Geethavani and Padwad, Yogendra and Patial, Vikram and Hallan, Vipin and Singh, Damanpreet and Tirpude, Narendra and Chakrabarti, Partha and Maity, Sujay Krishna and Ganguly, Dipyaman and Sistla, Ramakrishna and Balthu, Narender Kumar and Kumar, Kiran A. and Ranjith, Siva and Kumar, B. Vijay and Jamwal, Piyush Singh and Wali, Anshu and Ahmed, Sajad and Chouhan, Rekha and Gandhi, Sumit G. and Sharma, Nancy and Rai, Garima and Irshad, Faisal and Jamwal, Vijay Lakshmi and Paddar, Masroor Ahmad and Khan, Sameer Ullah and Malik, Fayaz and Ghosh, Debashish and Thakkar, Ghanshyam and Barik, S. K. and Tripathi, Prabhanshu and Satija, Yatendra Kumar and Mohanty, Sneha and Khan, Md Tauseef and Subudhi, Umakanta and Sen, Pradip and Kumar, Rashmi and Bhardwaj, Anshu and Gupta, Pawan and Sharma, Deepak and Tuli, Amit and Chaudhuri, Saumya Ray and Krishnamurthi, Srinivasan and Prakash, L. and Rao, V. Ch and Singh, B. N. and Chaurasiya, Arvindkumar and Chaurasiya, Meera and Bhadange, Mayuri and Likhitkar, Bhagyashree and Mohite, Sharada and Patil, Yogita and Kulkarni, Mahesh and Joshi, Rakesh and Pandya, Vaibhav and Mahajan, Sachin and Patil, Amita and Samson, Rachel and Vare, Tejas and Dharne, Mahesh and Giri, Ashok and Mahajan, Sachin and Paranjape, Shilpa and Sastry, G. Narahari and Kalita, Jatin and Phukan, Tridip and Manna, Prasenjit and Romi, Wahengbam and Bharali, Pankaj and Ozah, Dibyajyoti and Sahu, RaviKumar and Dutta, Prachurjya and Singh, Moirangthem Goutam and Gogoi, Gayatri and Tapadar, Yasmin Begam and Babu, Elapavalooru V. S. S. K. and Sukumaran, Rajeev K. and Nair, Aishwarya R. and Puthiyamadam, Anoop and Valappil, Prajeesh Kooloth and Prasannakumari, Adrash Velayudhan Pillai and Chodankar, Kalpana and Damare, Samir and Agrawal, Ved Varun and Chaudhary, Kumardeep and Agrawal, Anurag and Sengupta, Shantanu and Dash, Debasis} } @article {48202, title = {Mechanistic insight into differential interactions of iron oxide nanoparticles with native, glycated albumin and their effect on erythrocytes parameters}, journal = {International Journal of Biological Macromolecules}, volume = {212}, year = {2022}, month = {JUL }, pages = {232-247}, type = {Article}, abstract = {

Nanoparticles and protein bioconjugates have been studied for multiple biomedical applications. We sought to investigate the interaction and structural modifications of bovine serum albumin (BSA) with iron oxide nanoparticles (IONPs). The IONPs were green synthesized using E. crassipes aqueous leaf extract following characterization using transmission electron microscopy, energy dispersive X-ray analysis and X-ray diffraction. Two different concentrations of native/glycated albumin (0.5 and 1.5 mg/ml) with IONPs were allowed to interact for 1 h at 37 degrees C. Glycation markers, protein modification markers, cellular antioxidant, and hemolysis studies showed structural modifications and conformational changes in albumin due to the presence of IONPs. UV-visible absorbance resulted in hyperchromic and bathochromic effects of IONPs-BSA conjugates. Fluorescence measurements of tyrosine, tryptophan, advanced glycated end products, and ANS binding assay were promising and quenching effects proved IONPs-BSA conjugate formation. In FTIR of BSA-IONPs, transmittance was increased in amide A and B bands while decreased in amide I and II bands. In summary, native PAGE, HPLC, and FTIR analysis displayed a differential behaviour of IONPs with native and glycated BSA. These results provided an understanding of the interaction and structural modifications of glycated and native BSA which may provide fundamental repercussions in future studies.

}, keywords = {Albumin, Glycation, iron oxide nanoparticles}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2022.05.106}, author = {Nisar, Akib and Ajabia, Devangi K. and Agrawal, Sanskruthi B. and Varma, Sanjana and Chaudhari, Bhushan P. and Tupe, Rashmi S.} } @article {47899, title = {Mechanistically guided one pot synthesis of phosphine-phosphite and its implication in asymmetric hydrogenation}, journal = {European Journal of Organic Chemistry}, volume = {2022}, year = {2022}, month = {JAN}, pages = {e202101447}, type = {Article}, abstract = {

Although hybrid bidentate ligands are known to yield highly enantioselective products in asymmetric hydrogenation (AH), synthesis of these ligands is an arduous process. Herein, a one pot, atom-economic synthesis of a hybrid phosphine-phosphite (L1) is reported. After understanding the reactivity difference between an 0-nucleophile versus C-nucleophile, one pot synthesis of Senphos (L1) was achieved (72\%). When L1 was treated with [Rh], P-31 NMR revealed bidentate coordination to Rh. Senphos, in the presence of rhodium, catalyzes the AH of Methyl-2-acetamido-3-phenylacrylate and discloses an unprecedented turn over frequency of 2289, along with excellent enantio-selectivity (92\%). The generality is demonstrated by hydrogenating an array of alkenes. The AH operates under mild conditions of 1-2 bar H-2 pressure, at room temperature. The practical relevance of Ll is demonstrated by scaling-up the reaction to 1 g and by synthesizing DOPA, a drug widely employed for the treatment of Parkinson{\textquoteright}s disease. Computational insights indicate that the R isomer is preferred by 3.8 kcal/mol over the S isomer.

}, keywords = {asymmetric hydrogenation, catalysis, DOPA synthesis, One pot synthesis, Phosphine-phosphite ligand}, issn = {1434-193X}, doi = {10.1002/ejoc.202101447}, author = {Sen, Anirban and Kumar, Rohit and Pandey, Swechchha and Raj, K. Vipin and Kumar, Pawan and Vanka, Kumar and Chikkali, Samir H.} } @article {48157, title = {Morphology-tuned Pt3Ge accelerates water dissociation to industrial-standard hydrogen production over a wide pH range}, journal = {Advanced Materials}, volume = {34}, year = {2022}, month = {JUL}, pages = {2202294}, type = {Article}, abstract = {

The discovery of novel materials for industrial-standard hydrogen production is the present need considering the global energy infrastructure. A novel electrocatalyst, Pt3Ge, which is engineered with a desired crystallographic facet (202), accelerates hydrogen production by water electrolysis, and records industrially desired operational stability compared to the commercial catalyst platinum is introduced. Pt3Ge-(202) exhibits low overpotential of 21.7 mV (24.6 mV for Pt/C) and 92 mV for 10 and 200 mA cm(-2) current density, respectively in 0.5 m H2SO4. It also exhibits remarkable stability of 15 000 accelerated degradation tests cycles (5000 for Pt/C) and exceptional durability of 500 h (@10 mA cm(-2)) in acidic media. Pt3Ge-(202) also displays low overpotential of 96 mV for 10 mA cm(-2) current density in the alkaline medium, rationalizing its hydrogen production ability over a wide pH range required commercial operations. Long-term durability (\>75 h in alkaline media) with the industrial level current density (\>500 mA cm(-2)) has been demonstrated by utilizing the electrochemical flow reactor. The driving force behind this stupendous performance of Pt3Ge-(202) has been envisaged by mapping the reaction mechanism, active sites, and charge-transfer kinetics via controlled electrochemical experiments, ex situ X-ray photoelectron spectroscopy, in situ infrared spectroscopy, and in situ X-ray absorption spectroscopy further corroborated by first principles calculations.

}, keywords = {Electrochemistry, hydrogen production, intermetallics, water electrolysis}, issn = {0935-9648}, doi = {10.1002/adma.202202294}, author = {Mondal, Soumi and Sarkar, Shreya and Bagchi, Debabrata and Das, Tisita and Das, Risov and Singh, Ashutosh Kumar and Prasanna, Ponnappa Kechanda and Vinod, C. P. and Chakraborty, Sudip and Peter, Sebastian C.} } @article {47813, title = {Na-montmorillonite to Fe(II)-Mt using ferrous citrate/ascorbate obtained by dissolving iron powder}, journal = {Applied Clay Science}, volume = {217}, year = {2022}, month = {FEB}, pages = {106396}, type = {Article}, abstract = {Bentonite containing montmorillonite (Mt) as the major clay mineral is the potential buffer material of engineered barrier system in the deep geological repository for high-level waste management. The corrosion products of canister/or overpack material (carbon steel) may alter the basic characteristics of bentonite through Fe/clay interaction and formation of FeMt to certain extent. A convenient method is required for quantitative preparation of Fe(II)-Mt because the only few direct methods reported have some limitations. For this, weak ferrous complexes having good solubility to facilitate the cation-exchange with bentonite is essential. Therefore, Fe(II)-citrate, Fe(II)-ascorbate and Fe(II)-citrate/ascorbate were obtained here by dissolving the iron powder (Fe0) in citric acid (CA), ascorbic acid (AA) and their equimolar mixtures from 25~mM to 300~mM at 70~{\textdegree}C under N2 atmosphere. The redox potential was measured to monitor the dissolution of Fe0 in these mild organic acids. Higher dissolution of Fe0 occurred in CA~+~AA mixture. The dissolved iron in the form of ferrous complex was reasonably stable in inert atmosphere, Fe2+/Fetotal~≈~1. The parent clay mineral (bentonite, NaMt) was treated with Fe(II)~-~cit/asc to form Fe(II)~-~Mt. through cation exchange process. The CEC and ferrous to ferric ratio of the Fe(II)-Mt was close to the stoichiometric amount. The XRF, XRD, ac impedance, FT-IR, TGA/DSC, XPS and FE-SEM are used for further characterization. In-situ complexation reaction of interlayer Fe2+ ions in Fe(II)-Mt with o-phenanthroline was also observed.}, keywords = {Ascorbic acid, Bentonite, Citric acid, Cr(VI) reduction, Fe(II)-montmorillonite, Iron dissolution}, issn = {0169-1317}, doi = {10.1016/j.clay.2021.106396}, author = {S. Chikkamath and J. Manjanna and N. Momin and B.G. Hegde and G.P. Nayaka and Aishwarya S. Kar and B.S. Tomar} } @article {48415, title = {Noble-metal-free heterojunction photocatalyst for selective CO2 reduction to methane upon induced strain relaxation}, journal = {ACS Catalysis}, volume = {12}, year = {2022}, month = {JAN }, pages = {687-697}, type = {Article}, abstract = {

Sunlight-driven CO2 hydrogenation has drawn tremendous attention. However, selective CH4 formation via CO2 photoreduction is very challenging. Herein, we report a metal oxide semiconductor heterojunction consisting of BiVO4 and WO3 as a photocatalyst for the efficient conversion of carbon dioxide (CO2) selectively to methane (105 mu mol g(-1) h(-1)) under visible light in the absence of a sacrificial agent. Wise selection of the reaction medium and the strategically tuned heterojunction upon strain relaxation suppresses the competitive hydrogen generation reaction. The detailed photophysical, photoelectrochemical, and X-ray absorption spectroscopy studies pointed to the Z-scheme mechanism of electron transfer, which favors superior electron and hole separation compared to the individual components of the composite catalyst and other well-known photocatalysts reported for CO2 reduction. The observations are further corroborated by experimental diffuse reflectance infrared Fourier transform spectroscopy and theoretical density-functional theory calculations, which reveal that the heterojunction has a lower free-energy barrier for CO2 conversion to CH4 due to the larger stabilization of the *CH2O intermediate on the strain-relaxed heterojunction surface, in comparison to the pristine BiVO4 surface. The present work provides fundamental insights for constructing high-performance heterojunction photocatalysts for the selective conversion of CO2 to desired chemicals and fuels.

}, keywords = {CO2 reduction, heterostructure, methane, Photocatalysis, Z-scheme}, issn = {2155-5435}, doi = {10.1021/acscatal.1c04587}, author = {Das, Risov and Sarkar, Shreya and Kumar, Ritesh and Ramarao, Seethiraju D. and Cherevotan, Arjun and Jasil, Mohammed and Vinod, Chathakudath P. and Singh, Abhishek Kumar and Peter, Sebastian C.} } @article {47777, title = {One-pot concurrent biosynthesis of biphasic CuxO (cuprous and cupric oxide) nanoparticles using leaf extract of Eichhornia crassipes and investigation of their potent healthcare applications}, journal = {Emergent Materials}, year = {2022}, month = {FEB}, type = {Article}, abstract = {Eichhornia crassipes, an aquatic weed, has been used for the one-pot quick synthesis of cuprous and cupric oxide nanoparticles in this report. The identification and validation of the formed nanoparticles were successfully done by sophisticated characterization techniques such as UV{\textendash}visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. Their biomedical interventions were assessed by their antioxidant and anticancer activities. The synthesized nanoparticles have a spherical morphology with an average diameter of 10~nm. Antioxidant assay performed showed an increasing trend in a dose-dependent manner with the percentage radical scavenging activity up to 94.70\% at a much higher concentration of 1000~{\textmu}g/ml. The antioxidant potential at such higher concentration is suspected to invoke a change in the cytotoxic potential of the nanoparticles which is then verified by the MTT assay. A significant cytotoxic activity against HeLa (cervical cancer) and HCT 116 (colorectal carcinoma) cell lines was detected with noted IC50 values of 17.17 and 13.70~{\textmu}g/ml respectively. The conclusive findings obtained are enough to substantiate the use of these nanoparticles in biomedical areas specifically in anticancer treatment due to their high toxicities. The hazards imposed by Eichhornia crassipes can be alleviated by using them as biofactories for the synthesis of a variety of nanomaterials. This helps in curbing the water pollution issues as well as the developing synthesis protocols for robust and stable nanoparticles.}, isbn = {2522-574X}, doi = {10.1007/s42247-022-00347-1}, url = {https://doi.org/10.1007/s42247-022-00347-1}, author = {Moudgil, Aliesha and Varma, Sanjana and Shinde, Manish D. and Vamkudoth, Koteswara Rao and Sarkar, Dhiman M. and Shende, Rajnigandha A. and Amalnerkar, Dinesh and Chaudhari, Bhushan P.} } @article {48167, title = {On-off infrared absorption of the S=O vibrational probe of dimethyl sulfoxide}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {JUN}, pages = {4501-4508}, type = {Article}, abstract = {

Dimethyl sulfoxide (DMSO), a polar solvent molecule, is used in a wide range of therapeutic and such as dimerization and hydrogen bonding with water, are crucial to understanding the role of DMSO in applications. Herein, we study DMSO in various solvation environments to decipher the environment-dependent dimerization and hydrogen-bonding propensity. We use a combination of infrared spectroscopy, quantum mechanical calculations, and molecular dynamics simulations to reach our conclusions. Although DMSO can exist in a dynamic equilibrium between monomers and dimers, our results show that the relative intensity of the S=O stretch and the CH3 rocking modes is a spectroscopic indicator of the extent of DMSO dimerization in solution. The dimerization (self-association) is seen to be maximum in neat DMSO. When dissolved in different solvents, the dimerization propensity decreases with increasing solvent polarity. In the presence of a protic solvent, such as water, DMSO forms a hydrogen bond with the solvent molecules, thereby reducing the extent of dimerization. Further, we estimate the hydrogen-bond occupancy of DMSO. Our results show that DMSO predominantly exists as doubly hydrogen-bonded in water.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.1c105584501J}, author = {Chakrabarty, Suranjana and Deshmukh, Samadhan H. and Barman, Anjan and Bagchi, Sayan and Ghosh, Anup} } @article {48063, title = {Pharmaceutical standardization and physicochemical characterization of traditional ayurvedic mineral drug red ochre roasted in cow{\textquoteright}s ghee (Shuddha Gairik)}, journal = {Indian Journal of Traditional Knowledge}, volume = {21}, year = {2022}, month = {APR}, pages = {303-316}, type = {Article}, abstract = {

Rasashastra is a pharmaceutics branch of Ayurveda describing scientific methods to convert metals and minerals into bio-compatible formulations used individually or plant admixed to enhance their bioavailability and efficacy. In the present study, red ochre (Gairik) powder was processed in cow{\textquoteright}s ghee by textual method of roasting. The steps of preparation and changes in the properties therein were documented and validated in triplicate batches to develop a monograph. Ayurvedic and basic tests were performed to determine the properties of Shuddha Gairik. The physical characterization included Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infra-red (FT-IR), Dynamic Light Scattering (DLS) and Thermo-gravimetric Analysis (TGA). Elemental composition was estimated by titration and gravimetric analysis while heavy metal limits were assessed using Inductively Coupled Plasma Optical Emission Spectrophotometry (ICPOES). This study depicted that crude red ochre, containing Kaolinite with high iron percentage, on roasting in cow{\textquoteright}s ghee led to the formation of fatty acids adsorbed red ochre particles. The developed monograph will be a guideline to the Ayurvedic industry for precise formulation of Shuddha Gairik. This will help researchers for better understanding the importance of Ayurvedic methods of pharmaceutical preparations and carry out their mechanistic studies in various diseases.

}, keywords = {Ferric oxide, Gairik, Kaolinite, Monograph, Red ochre, Roasting}, issn = {0972-5938}, author = {Chavan, S. B. and Gupta, V. S. and Deshmukh, V. V. and Sardeshmukh, S. P.} } @article {48209, title = {Porous covalent organic nanotubes and their assembly in loops and toroids}, journal = {Nature Chemistry}, volume = {14}, year = {2022}, month = {MAY}, pages = {507+}, type = {Article}, abstract = {

Carbon nanotubes, and synthetic organic nanotubes more generally, have in recent decades been widely explored for application in electronic devices, energy storage, catalysis and biosensors. Despite noteworthy progress made in the synthesis of nanotubular architectures with well-defined lengths and diameters, purely covalently bonded organic nanotubes have remained somewhat challenging to prepare. Here we report the synthesis of covalently bonded porous organic nanotubes (CONTs) by Schiff base reaction between a tetratopic amine-functionalized triptycene and a linear dialdehyde. The spatial orientation of the functional groups promotes the growth of the framework in one dimension, and the strong covalent bonds between carbon, nitrogen and oxygen impart the resulting CONTs with high thermal and chemical stability. Upon ultrasonication, the CONTs form intertwined structures that go on to coil and form toroidal superstructures. Computational studies give some insight into the effect of the solvent in this assembly process.

}, issn = {1755-4330}, doi = {10.1038/s41557-022-00908-1}, author = {Koner, Kalipada and Karak, Shayan and Kandambeth, Sharath and Karak, Suvendu and Thomas, Neethu and Leanza, Luigi and Perego, Claudio and Pesce, Luca and Capelli, Riccardo and Moun, Monika and Bhakar, Monika and Ajithkumar, Thalasseril G. and Pavan, Giovanni M. and Banerjee, Rahul} } @article {48360, title = {Preface to special issue on protein-mediated membrane remodeling}, journal = {Journal of Membrane Biology}, volume = {255}, year = {2022}, month = {DEC}, pages = {633-635}, type = {Editorial Material}, issn = {0022-2631}, doi = {10.1007/s00232-022-00273-7}, author = {Chakraborty, Hirak and Sengupta, Durba} } @article {48375, title = {Profiling of metabolic alterations in mice infected with malaria parasites via high-resolution metabolomics}, journal = {Molecular and Biochemical Parasitology}, volume = {252}, year = {2022}, month = {NOV}, pages = {111525}, type = {Article}, abstract = {

Background: Malaria infection can result in distinct clinical outcomes from asymptomatic to severe. The association between patho-physiological changes and molecular changes in the host, and their correlation with severity of malaria progression is not fully understood. Methods: In this study, we addressed mass spectrometry-based temporal profiling of serum metabolite levels from mice infected with Plasmodium berhgei (strain ANKA). Results: We show global perturbations and identify changes in specific metabolites in correlation with disease progression. While metabolome-wide changes were apparent in late-stage malaria, a subset of metabolites exhibited highly correlated changes with disease progression. These metabolites changed early on following infection and either continued or maintained the change as mice developed severe disease. Some of these have the potential to be sentinel metabolites for severe malaria. Moreover, glycolytic metabolites, purine nucleotide precursors, tryptophan and its bioactive derivatives were many fold decreased in late-stage disease. Interestingly, uric acid, a metabolic waste reported to be elevated in severe human malaria, increased with disease progression, and subsequently appears to be detoxified into allantoin. This detoxification mechanism is absent in humans as they lack the enzyme uricase. Conclusions: We have identified candidate marker metabolites that may be of relevance in the context of human malaria.

}, keywords = {Host response, Infectious diseases, malaria, metabolite, Plasmodium}, issn = {0166-6851}, doi = {10.1016/j.molbiopara.2022.111525}, author = {Chhibber-Goel, Jyoti and Shukla, Anurag and Shanmugam, Dhanasekaran and Sharma, Amit} } @article {48404, title = {Proteomic profile of candida albicans biofilm}, journal = {Journal of Proteomics}, volume = {265}, year = {2022}, month = {AUG }, pages = {104661}, type = {Article}, abstract = {

Candida albicans biofilms are characterized by structural and cellular heterogeneity that confers antifungal resistance and immune evasion. Despite this, biofilm formation remains poorly understood. In this study, we used proteomic analysis to understand biofilm formation in C. albicans related to morphophysiological and architectural features. LC-MS/MS analysis revealed that 64 proteins were significantly modulated, of which 31 were upregulated and 33 were downregulated. The results indicate that metabolism (25 proteins), gene expression (13 proteins), stress response (7 proteins), and cell wall (5 proteins) composition are modulated. The rate of oxidative phosphorylation (OxPhos) and biosynthesis of UDP-N-acetylglucosamine, vitamin B6, and thiamine increased, while the rate of methionine biosynthesis decreased. There was a significant modification of the cell wall architecture due to higher levels of Sun41, Pir1 and Csh1 and increased glycosylation of proteins. It was observed that C. albicans induces hyphal growth by upregulating the expression of genes involved in cAMP-PKA and MAPK pathways. This study is significant in that it suggests an increase in OxPhos and alteration of cell wall architecture that could be contributing to the recalcitrance of C. albicans cells growing in biofilms. Nevertheless, a deeper investigation is needed to explore it further.Significance: Candida sps is included in the list of pathogens with potential drug resistance threat due to the increased frequency especially colonization of medical devices, and tissues among the patients, in recent years. Significance of our study is that we are reporting traits like modulation in cell wall composition, amino acid and vitamin biosynthesis and importantly energy generation (OxPhos) etc. These traits could be conferring antifungal resistance, host immune evasion etc. and thus survival, in addition to facilitating biofilm formation. These findings are expected to prime the further studies on devising potent strategy against biofilm growth among the patients.

}, keywords = {Biofilm, Candida albicans, Cell wall, LC-MS, Metabolism, MS, proteomics}, issn = {1874-3919}, doi = {10.1016/j.jprot.2022.104661}, author = {Abdulghani, Mazen and Iram, Rasiqua and Chidrawar, Priti and Bhosle, Kajal and Kazi, Rubina and Patil, Rajendra and Kharat, Kiran and Zore, Gajanan} } @article {48006, title = {Rapid synthesis of the epi-biotin sulfone via tandem S,N-carbonyl migration/aza-michael/spirocyclization and haller-bauer reaction}, journal = {ACS Omega}, volume = {7}, year = {2022}, month = {MAY }, pages = {17215-17222}, type = {Article}, abstract = {

A synthesis of 2-epi-biotin sulfone was accomplished from commercially available L-cysteine. The synthesis features an unprecedented tandem S,N-carbonyl migration/aza-Michael/spirocyclization reaction from an L-cysteine-derived enone with aq. ammonia, in which three new sigma bonds and two rings are formed. In addition, the synthesis includes a highly diastereoselective late-stage Haller-Bauer reaction of sulfone for direct introduction of the carbon side chain.

}, issn = {2470-1343}, doi = {10.1021/acsomega.2c01030}, author = {Chavan, Subhash P. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {48203, title = {Reactive extraction of gluconic acid using trioctylamine in different diluents}, journal = {Chemical Engineering \& Technology}, volume = {45}, year = {2022}, month = {MAR}, pages = {417-424}, type = {Article}, abstract = {

Reactive extraction of gluconic acid (GA) from aqueous solutions was investigated using trioctylamine (TOA) as extractant in the presence of benzyl alcohol (BA) and 1-decanol (DE) as diluents. Physical extraction of GA with pure diluents in the absence of TOA was found to be poor. Reactive extraction with an amine-diluent mixture enhanced the separation process. Higher extraction efficiencies and distribution coefficients were achieved in the presence of BA as compared to DE. Further optimization studies were carried out to determine the synergistic effect of amine/diluent ratio. Loading ratios higher than 0.5 suggested 3:1 complex formation of GA with the amine. A reactive extraction mechanism of GA in TOA was proposed, and the equilibrium complexation constant was determined.

}, keywords = {1-Decanol, Benzyl alcohol, Gluconic acid, reactive extraction, Trioctylamine}, issn = {0930-7516}, doi = {10.1002/ceat.202100373}, author = {Kakku, Sivasankar and Gaikwad, Shripal M. and Gaikwad, Shashank and Taralkar, Suyogkumar V. and Billa, Sarath Babu and Chakinala, Anand Gupta and Chakinala, Nandana} } @article {48143, title = {Ready access to densely substituted furans using Tsuji-Wacker type cyclization}, journal = {Journal of Organic Chemistry}, volume = {87}, year = {2022}, month = {JAN }, pages = {556-568}, type = {Article}, abstract = {

A competent method for the construction of highly substituted furans catalyzed by Pd(II) and Cu(II) chloride has been developed. The method provides easy access to di-, tri-, and tetrasubstituted furans from corresponding diols with relatively mild conditions in a unified strategy. The developed method has been successfully tested with more than 25 substrates, which resulted in furans of multiple substitution patterns with up to 84\% isolated yields.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.1c02567}, author = {Masal, Dattatraya P. and Choudhury, Rahul and Singh, Aman and Reddy, D. Srinivasa} } @article {48065, title = {Reduction of carbon dioxide to dimethylformamide using ruthenium doped Mg/Al hydrotalcites under supercritical conditions}, journal = {Journal of CO2 Utilization}, volume = {61}, year = {2022}, month = {JUL}, pages = {102055}, type = {Article}, abstract = {

The utilization of carbon dioxide is one of the developing areas due to its significant contribution to global warming. Reducing carbon dioxide (CO2) to formic acid and its derivatives has gained importance because of its thermodynamic limitations and high industrial demand. In this article, we report the synthesis of dime-thylformamide (DMF) using ruthenium doped Mg/Al calcined hydrotalcite by CO2 hydrogenation in the presence of dimethylamine (DMA). At optimized conditions, complete conversion of dimethylamine was achieved with more than 92\% product yield at 170 degrees C and 13 MPa pressure with a reaction time of 6 h. Key catalyst properties were determined using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2-temper-ature programmed desorption (TPD), H-2 temperature-programmed reduction (TPR) and Fourier transform infrared (FTIR). The determination of surface morphology was carried out using field emission scanning electron microscope (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM). At the same time, the chemical composition was verified by energy-dispersive X-ray (EDS). In addition, kinetic modeling is performed using the two site Langmuir-Hinshelwood-Hougen-Watson model. The regressed kinetic parameters gave an appropriate fit with experimental concentration values and activation energy is calculated as 413 kJ/mol K-1.

}, keywords = {Dimethylformamide, Hydrogenation, hydrotalcite, Langmuir-Hinshelwood-Hougen-Watson model, Supercritical carbon dioxide}, issn = {2212-9820}, doi = {10.1016/j.jcou.2022.102055}, author = {Chaudhary, Sagar D. and Rahatade, Shardul S. and Joshi, Sunil S. and Mali, Nilesh A.} } @article {48075, title = {Revisiting classical pummerer cyclization reaction: a key strategy for the synthesis of (+/-)-quinagolide}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {JUL}, pages = {e202201600}, type = {Article}, abstract = {

A formal synthesis of (+/-)-quinagolide using beta-alanine as a starting material has been achieved. Late stage intramolecular classical Pummerer reaction has been used as a key synthetic tool to construct octahydrobenzo[g]quinoline skeleton of quinagolide. Conjugative reduction of olefin, regioselective C-alkylation over O-alkylation of beta-ketoester followed by retro-Dieckmann/ Dieckmann reaction sequence has been used as a key reaction sequence to achieve prerequisite sulfoxide for the Pummerer reaction. While revisiting the classical Pummerer reaction, the one-pot sequential thionium ion induced cyclocarbamation followed by N-carbamate deprotection and Friedel-Crafts type Pummerer cyclization was observed as an important finding of the present work.

}, keywords = {Alkylation, Cyclocarbamation, Hyperprolactinemia, rearrangement, Thionium ion}, issn = {2365-6549}, doi = {10.1002/slct.202201600}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Tripathi, Anupam and Kadam, Appasaheb L. and Gonnade, Rajesh G.} } @article {46609, title = {Role of cysteines in accelerating Tau filament formation}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {40}, year = {2022}, month = {JUN}, pages = {4366-4375}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is majorly associated with intracellular accumulation of Tau into paired helical filaments and tangles. The self-aggregated dimeric and oligomeric species of Tau formed are more toxic to neuronal cells and acts as seeds for filament formation. The two cysteine residues and the two hexapeptide regions of full-length Tau play a key role in initialization and filament formation during Tau aggregation. The role of cysteine residues in Tau aggregation has been studied by in-vitro aggregation assay that was measured by Thioflavin S fluorescence to observe the kinetics of aggregation. In this study, we have performed in-vitro aggregation assay with recombinant full-length Tau and the cysteine mutants to understand the mechanism of cysteine independent Tau aggregation. Here, we report that cysteine mutant full-length Tau can aggregate to form filaments under in-vitro conditions. To visualize the polymorphisms of Tau and cysteine mutants under different aggregation conditions anionic cofactor, heparin was employed. Wild-type Tau showed rapid aggregation to form oligomers and filaments. On the other hand, the cysteine mutant delayed the initial Tau aggregation. This indicates the importance of cysteine residues in accelerating initial Tau nucleation for its aggregation. The filament morphology of wild-type and cysteine mutant Tau has been characterized using transmission electron microscopy and high-resolution transmission electron microscopy. Communicated by Ramaswamy H. Sarma

}, keywords = {Heparin-induced aggregation, Paired helical filaments, Tau Aggregation, Tau Oligomers, tau protein}, issn = {0739-1102}, doi = {10.1080/07391102.2020.1856720}, author = {Chidambaram, Hariharakrishnan and Chinnathambi, Subashchandrabose} } @article {48178, title = {{\textquoteleft}Self-activating{\textquoteright} Bi3TaO7-Bi4TaO8Br photocatalyst and its use in the sustainable production of pro-fluorophoric rhodamine-110}, journal = {Green Chemistry}, volume = {24}, year = {2022}, month = {JUL}, pages = {5514-5523}, type = {Article}, abstract = {

We counter two common notions that (i) photocatalysts are likely to degrade during use with barely any strategy to counter it and (ii) rhodamine-B (RhB) photo-degradation lacks any useful or commercial prospects even after 53 years of its discovery by developing a photocatalyst that continues to improve its activity for similar to 300 h due to a leaching induced {\textquoteleft}self-activation{\textquoteright} process. Rhodamine-110 (Rh110) is a widely used pro-fluorophore in biological studies. However, its commercial production is highly challenging due to the formation of various side-products originating from the presence of the two labile amino side-groups that induce the pro-fluorophore activity, leading to purification difficulties, low yield, and unusually high costs. Herein, we demonstrate a facile strategy to produce pure Rh110 using extremely inexpensive RhB and Bi3TaO7-Bi4TaO8Br heterostructures as a catalyst in sunlight. The catalyst is not just stable over 30 catalytic cycles but also gets activated continuously in successive cycles to produce a reaction yield as high as 88\%. The role of the heterostructure, the origin of surface activation, and the RhB -\> Rh110 transformation mechanism have been established. Based on 150 days of sunlight experiments, large-scale production prospects (similar to 4000 times scale-up) and isolation of Rh110 have also been realized, paving a novel way for its production by anyone, inexpensive biological essaying, and device fabrication. Continuously improving catalysts are unknown and compensatory leaching of metal atoms from the catalyst surface may pave the way to realize them.

}, issn = {1463-9262}, doi = {10.1039/d2gc01574a}, author = {Banoo, Maqsuma and Chatterjee, Kaustav and Mondal, Sanjit and Vinod, C. P. and Gautam, Ujjal K.} } @article {48232, title = {Single-step synthesis of exfoliated Ti3C2Tx MXene through NaBF4/HCl etching as electrode material for asymmetric supercapacitor}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {MAY}, pages = {e202201166}, type = {Article}, abstract = {

Two-dimensional Ti3C2Tx MXene, derived from the parent Ti3AlC2 phase, is considered a promising electrode material for electrochemical energy storage applications. Ti3C2Tx MXene synthesis methods often employ concentrated hydrofluoric acid (HF), which is harsh, corrosive, and hazardous to the environment. Herein, we report the preparation of Ti3C2Tx MXene following a new synthetic route under a mild reaction condition comprising an aqueous solution of NaBF4 and HCl. This etching environment at a moderate temperature of 130 degrees C effectively removes the Al layer of the Ti3AlC2 precursor, assisted by the in situ formed HF in the reaction medium. Electron microscopy images of the as-prepared Ti3C2Tx (MX-130) reveal a partially exfoliated nanosheet-like morphology. The material displays a specific capacitance of 262 F g(-1) (three-electrode assembly, 1 A g(-1), -0.85 to -0.25 V vs. Hg/Hg2SO4) in 1 M H2SO4 electrolyte. The achieved specific capacitance is superior to that of Ti3C2Tx prepared via the common HF-treatment (25 F g(-1)). Additionally, the potential application of the optimized MXene as a negative electrode material is demonstrated in a quasi-solid-state RuO2|MX-130 asymmetric supercapacitor device.

}, keywords = {asymmetric supercapacitor, Electrochemistry, Fluoride salt etchant, Layered electrode materials, Transition metal carbides}, issn = {2365-6549}, doi = {10.1002/slct.202201166}, author = {Ghosh, Meena and Szunerits, Sabine and Cao, Ning and Kurungot, Sreekumar and Boukherroub, Rabah} } @article {48400, title = {Size-dependent order-disorder crossover in hydrophobic hydration: comparison between spherical solutes and linear alcohols}, journal = {ACS Omega}, volume = {7}, year = {2022}, month = {JAN}, pages = {2671-2678}, type = {Article}, abstract = {

Theory and computer simulation studies have predicted that water molecules around hydrophobic molecules should undergo an order-disorder transition with increasing solute size around a 1 nm length scale. Some theories predict the formation of a clathrate-like ordered structure around smaller hydrophobic solutes (\<1 nm) and the formation of disordered vapor-liquid interfaces around larger solutes (\>1 nm) and surfaces. Experimental validation of these predictions has often been elusive and contradictory. High-resolution Raman spectroscopy has detected that water around small hydrophobic solutes shows a signature similar to that of bulk water at lower temperature (increased ordering and a stronger hydrogen-bonded network). Similarly, water around larger solutes shows an increasing population of dangling OH bonds very similar to higher temperature bulk water. Thus, the solute size dependence of the structure and dynamics of water around hydrophobic molecules seems to have an analogy with the temperature dependence in bulk water. In this work, using atomistic classical molecular dynamics (MD) simulations, we have systematically investigated this aspect and characterized this interesting analogy. Structural order parameters including the tetrahedral order parameter (Q), hydrogen bond distribution, and vibrational power spectrum highlight this similarity. However, in contrast to the experimental observations, we do not observe any length-dependent crossover for linear hydrophobic alcohols (n-alkanols) using classical MD simulations. This is in agreement with earlier findings that linear alkane chains do not demonstrate the length-dependent order-disorder transition due to the presence of a sub-nanometer length scale along the cross section of the chain. Moreover, the collapsed state of linear hydrocarbon chains is not significantly populated for smaller chains (number of carbons below 20). In the context of our computational results, we raise several pertinent questions related to the sensitivity of various structural and dynamical parameters toward capturing these complex phenomena of hydrophobic hydration.

}, issn = {2470-1343}, doi = {10.1021/acsomega.1c05064}, author = {Hande, Vrushali and Chakrabarty, Suman} } @conference {48195, title = {Skin mimicking solid optical tissue phantom fulfillment and its characterization}, booktitle = {Photonics in Dermatology and Plastic Surgery 2022}, year = {2022}, publisher = {SPIE}, organization = {SPIE}, address = {1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA}, abstract = {

Skin mimicking optical tissue phantoms are widely used in diagnostics systems for characterization, optimization, routine calibration and validation. In general, solid phantoms are more preferred in comparison to liquid phantoms. Therefore, our aim is to prepare and characterize the solid tissue phantoms having skin equivalent optical properties. In this work, we have used epoxy resin and hardener as a base material and titanium oxide (TiO2) nanoparticles and ink as a scatterer and absorber media, respectively. The total transmission (Tt), collimated transmission (Tc), and diffuse reflectance (Rd) spectra of the developed phantoms were measured with an integrating sphere installed in UV-VIS spectrometer within the wavelength range 400-700 nm. To characterize the optical properties such as absorption (mu(a)), reduced scattering (mu(s){\textquoteright}), and anisotropy factor (g) of the developed tissue phantoms, the numerical model based on Inverse Adding Doubling (IAD) has been used. With various concentrations of absorber and scatterer, a calibration curve was prepared. The calculated experimental optical properties from IAD matched with the predicted intrinsic optical properties of the skin. Thus, the preliminary results suggest that the recipe used in this study may be used as an alternative approach to developing skin mimicking solid optical phantom for diagnostics system applications.

}, keywords = {Absorption, anisotropy factor, scattering, skin mimicking, solid tissue phantom}, isbn = {978-1-5106-4740-4; 978-1-5106-4739-8}, doi = {10.1117/12.2609577}, author = {Kumar, Ajay and Hinge, Sarika and Dixit, Hemant and Kanawade, Rajesh and Kulkarni, Gauri}, editor = {Choi, B and Zeng, H} } @article {48098, title = {Strain-enhanced phase transformation of iron oxide for higher alcohol production from CO2}, journal = {ACS Catalysis}, volume = {12}, year = {2022}, month = {SEP}, pages = {11118-11128}, type = {Article}, abstract = {

Conversion of CO2 to higher alcohols (HAs) and higher hydrocarbons (HCs) has a greater advantage compared to C1 products because of their high energy density and wide range of applications in daily life. Despite the immense potential of these chemicals, not much of scientific research has been focused on the conversion of CO2 to HAs. In the present work, we have introduced the concept of strain in designing the material to enhance the CO(2 )to HA performance. We introduced strain in a traditional iron-based catalyst, Fe2O3, by the introduction of indium (In), which facilitates the selective conversion of CO2 to HA. An optimum strain favored a 36.7\% CO2 conversion with a 42\% HA selectivity, and a record yield of 15.42\%. The strain has been tuned further with the introduction of K as a promoter. The introduced strain upon In substitution and K promotion favored the conversion of CO2, which is mapped by powder X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. Further, the change in the mechanism upon In incorporation and K promotion has been probed by in situ diffuse reflectance infrared fourier transform spectroscopy, and it is found that the OCHx intermediate, which produces HAs, is more prominent upon In substitution, which favored the enhancement of HA production compared to that of pristine Fe2O3.

}, keywords = {CO2 to HA, Fischer-Tropsch synthesis (FTS), Phase transformation, reverse water gas shift (RWGS) reaction, strain}, issn = {2155-5435}, doi = {10.1021/acscatal.2c0318311118}, author = {Goud, Devender and Churipard, Sathyapal R. and Bagchi, Debabrata and Singh, Ashutosh Kumar and Riyaz, Mohd and Vinod, C. P. and Peter, Sebastian C.} } @article {48088, title = {Structure-tailored surface oxide on Cu-Ga intermetallics enhances CO2 reduction selectivity to methanol at ultralow potential}, journal = {Advanced Materials}, volume = {34}, year = {2022}, month = {MAY}, pages = {2109426}, type = {Article}, abstract = {

Electrochemical CO2 reduction reaction (eCO(2)RR) is performed on two intermetallic compounds formed by copper and gallium metals (CuGa2 and Cu9Ga4). Among them, CuGa2 selectively converts CO2 to methanol with remarkable Faradaic efficiency of 77.26\% at an extremely low potential of -0.3 V vs RHE. The high performance of CuGa2 compared to Cu9Ga4 is driven by its unique 2D structure, which retains surface and subsurface oxide species (Ga2O3) even in the reduction atmosphere. The Ga2O3 species is mapped by X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) techniques and electrochemical measurements. The eCO(2)RR selectivity to methanol are decreased at higher potential due to the lattice expansion caused by the reduction of the Ga2O3, which is probed by in situ XAFS, quasi in situ powder X-ray diffraction, and ex situ XPS measurements. The mechanism of the formation of methanol is visualized by in situ infrared (IR) spectroscopy and the source of the carbon of methanol at the molecular level is confirmed from the isotope-labeling experiments in presence of (CO2)-C-13. Finally, to minimize the mass transport limitations and improve the overall eCO(2)RR performance, a poly(tetrafluoroethylene)-based gas diffusion electrode is used in the flow cell configuration.

}, keywords = {(2) reduction, CO, Electrochemistry, Methanol}, issn = {0935-9648}, doi = {10.1002/adma.202109426}, author = {Bagchi, Debabrata and Raj, Jithu and Singh, Ashutosh Kumar and Cherevotan, Arjun and Roy, Soumyabrata and Manoj, Kaja Sai and Vinod, C. P. and Peter, Sebastian C.} } @article {48092, title = {Study on anisotropy in wire arc additively manufactured Inconel 625 multi-layered wall and its correlation with molten pool thermal history}, journal = {Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing}, volume = {840}, year = {2022}, month = {APR}, pages = {142865}, type = {Article}, abstract = {

In the present study, the variation in molten pool thermal history with layer number during wire arc additive manufacturing of Inconel 625 wall was investigated. Further, its effect on the evolution of microstructure and anisotropy in mechanical and corrosion properties was reported. During the deposition process, the molten pool thermal history was monitored using a non-contact type IR pyrometer operating at 1.6 mu m wavelength. A total number of 40 layers were deposited, building a wall of 60 mm height. With an increase in layer number, the molten pool lifetime and cooling rate were found to increase and decrease, respectively, resulting in coarse grains and increased elemental segregation or Laves phase formation. To investigate its effect on mechanical properties, the samples were collected in a skewed fashion along the height with orientation in the deposition direction. The tensile specimens collected close to the substrate exhibited better strength and ductility, while the samples from the top location of the wall exhibited a relatively brittle mode of fracture, which was investigated by carrying out the fracture surface analysis using SEM. Corrosion test was also conducted along the height of the wall, wherein the samples close to substrate exhibited better corrosion resistance due to refined microstructure and low elemental segregations. Further, EDS, XRD analysis and hardness test were carried out to investigate the elemental composition, variation in phases and hardness with layer number, respectively.

}, keywords = {anisotropy, Layer number, mechanical properties, Molten pool thermal history, Wire arc additive manufacturing}, issn = {0921-5093}, doi = {10.1016/j.msea.2022.142865}, author = {Nagallapati, Vishwanath and Choudhary, Amit and Torris, Arun and Muvvala, Gopinath and Dadasaheb, Sagar Pawar and Gudur, Srinath Ellaswamy} } @article {48000, title = {Sustainable CO2 reduction on in (2)O(3 )with exclusive CO selectivity: catalysis and in situ valence band photoelectron spectral investigations}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {10}, year = {2022}, month = {MAR}, pages = {3521-3531}, type = {Article}, abstract = {

This study demonstrates a sustainable catalytic CO2 conversion to near 100\% CO selectivity at ambient pressure on In2O3. Critically, high CO yield could be observed at the cost of undesired methanation, using a lower than stoichiometric amount of hydrogen in the feed; 1:1 and 1:0.67 CO2:H-2 ratios exhibit 98-99.6\% CO selectivity with 25-38\% CO2 conversion between 773 and 873 K. CO2 and H-2 conversion under steady-state conditions at 773-873 K suggests a 1:1 ratio of adsorbed reactants (with 1:0.67 CO2:H-2 feed) on the catalyst surface, underscoring the presence of an ideal reactant composition for the reverse water-gas shift reaction, while H-2-rich feed compositions show the H-2-dominated surface. Surface electronic structure changes, under near-operating conditions, were explored with near ambient pressure photoelectron spectroscopy (NAPPES), and the interesting findings are as follows: (a) A shift in the valence band to lower binding energy, up to 0.6 eV, was observed because of electron filling at high temperatures. (b) An observation of heterogeneous nature of the catalyst surface under NAPPES measurement conditions is attributed to the generation of active oxygen vacancy (O-v) sites, which in turn changes the work function of In2O3. (c) The above changes are found to be reversible, when the reaction was stopped. Vibrational features of the reactant molecules were observed to be broadened in the active temperature window of the catalyst supporting the heterogeneous character of the catalyst surface because of dynamic O-v generation. By optimizing gas hourly space velocity, CO2:H-2 ratio, and reaction temperature, exclusive CO selectivity is possible with a H-2:CO2 ratio of similar to 0.67, which will avoid the product separation stage altogether, while minimizing the expensive H-2 in the reactant feed.

}, keywords = {heterogeneous catalysis, Oxygen vacancy, photoelectron spectroscopy, RWGS, Work function}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.1c07897}, author = {Mhamane, Nitin B. and Chetry, Sibo and Ranjan, Ravi and Raja, Thirumalaiswamy and Gopinath, Chinnakonda S.} } @article {48347, title = {Synergistic and competitive lipid interactions in the serotonin1A receptor microenvironment}, journal = {ACS Chemical Neuroscience}, volume = {13}, year = {2022}, month = {DEC }, pages = {3403-3415}, type = {Article}, abstract = {

The interaction of lipids with G-protein-coupled receptors (GPCRs) has been shown to modulate and dictate several aspects of GPCR organization and function. Diverse lipid interaction sites have been identified from structural biology, bioinformatics, and molecular dynamics studies. For example, multiple cholesterol interaction sites have been identified in the serotonin1A receptor, along with distinct and overlapping sphingolipid interaction sites. How these lipids interact with each other and what is the resultant effect on the receptor is still not clear. In this work, we have analyzed lipid-lipid crosstalk at the receptor of the serotonin1A receptor embedded in a membrane bilayer that mimics the neuronal membrane composition by long coarse-grain simulations. Using a set of similarity coefficients, we classified lipids that bind at the receptor together as synergistic cobinding, and those that bind individually as competitive. Our results show that certain lipids interact with the serotonin1A receptor in synergy with each other. Not surprisingly, the ganglioside GM1 and cholesterol show a synergistic cobinding, along with the relatively uncommon GM1-phosphatidylethanolamine (PE) and cholesterol-PE synergy. In contrast, certain lipid pairs such as cholesterol and sphingomyelin appear to be in competition at several sites, despite their coexistence in lipid nanodomains. In addition, we observed intralipid competition between two lipid tails, with the receptor exhibiting increased interactions with the unsaturated lipid tails. We believe our work represents an important step in understanding the diversity of GPCR-lipid interactions and exploring synergistic cobinding and competition in natural membranes.

}, keywords = {GPCR, lipid crosstalk, Martini coarse-grain simulations, Membrane cholesterol, neuronal membranes}, issn = {1948-7193}, doi = {10.1021/acschemneuro.2c00422}, author = {Mohole, Madhura and Sengupta, Durba and Chattopadhyay, Amitabha} } @article {48183, title = {Synergistic electronic effects in AuCo nanoparticles stabilized in a triazine-based covalent organic framework: a catalyst for methyl orange and methylene blue reduction}, journal = {ACS Applied Nano Materials}, volume = {5}, year = {2022}, month = {APR }, pages = {4744-4753}, type = {Article}, abstract = {

Developing stable active catalysts for reducing water-soluble pollutants is a desirable target. In this pursuit, we have functionalized covalent organic frameworks (COFs) with gold (Au) and cobalt (Co) nanoparticles via a one-step aqueous synthesis process, and their catalytic activity in reducing methyl orange and methylene blue is examined. Operando absorbance measurements of methyl orange (anionic dye) reduction revealed AuCoCOF (1.3 Au/1.0 Co) to have superior kinetics over many other catalysts, which typically require additional external stimuli (e.g., photons) and higher catalyst loadings. After confirming the homogeneous dispersion of the nanoparticles on the COF support using three-dimensional (3D) tomography and material stability through powder X-ray diffraction (PXRD), infrared (IR), and thermal studies, we investigated their redox activity. Cyclic voltammetry (CV) confirmed the involvement of both metals in the redox process, while spectroelectrochemical measurements show that their activity and kinetics remain unaltered by an applied potential. Solid-state UV measurements reveal that the neat COF is a semiconductor with a large band gap (2.8 eV), which is substantially lowered when loaded with cobalt nanoparticles (2.2 eV for CoCOF). The electronic synergy between Au and Co nanoparticles further reduces the band gap of AuCoCOF (1.9 eV). Thus, there is a definite advantage in doping non-noble metal nanoparticles into a noble metal lattice and nanoconfining them into a porous COF support. Our study highlights the significance of bimetallic COF-supported nanocatalysts, wherein one can engage each component toward targeted applications that demand redox activity with favorable kinetics.

}, keywords = {AuCoCOF, band gaps, Covalent organic framework, methyl orange reduction, Nanoparticles, UV-vis spectroscopy}, doi = {10.1021/acsanm.1c04212}, author = {Devulapalli, Venkata Swaroopa Datta and Kushwaha, Rinku and Ovalle, Edwin and Singh, Himan Dev and Shekhar, Pragalbh and Chakraborty, Debanjan and Vinod, Chathakudath Prabhakaran and Vaidhyanathan, Ramanathan and Borguet, Eric} } @article {48165, title = {Synthesis and antimycobacterial screening of a novel series of alpha-amino acids containing thiazole linker}, journal = {ARKIVOC}, year = {2022}, type = {Article}, abstract = {

A small focused library of uncommon (S)-2-amino-3-(4-(((4-methyl-2-arylthiazol-5-yl)methyl)amino)phenyl) propanoic acid (5a-e) and (S)-2-amino-3-(4-(((2-arylthiazol-4-yl)methyl)amino)phenyl)propanoic acid (9a-d) derivatives have been efficiently synthesized by employing molecular simplification. The title compounds were screened for inhibitory activity against Mycobacterium tuberculosis H37Ra (MTB) and Mycobacterium bovis (BCG) strains. The cytotoxicity study was conducted against primary Human Umbilical Vein Endothelial Cells (HUVECs), on two different human tumor cells HeLa, and HCT 116 and was observed non-toxic to host cells.

}, keywords = {Amino acid, antibacterial activity, Cytotoxicity, Mycobacterium tuberculosis, synthesis, Thiazole}, issn = {1551-7004}, doi = {10.24820/ark.5550190.p011.831}, author = {Nalawade, Jitendra L. and Mhaske, Pravin C. and Shinde, Abhijit D. and Chavan, Abhijit P. and Abhale, Yogita K. and Sarkar, Dhiman and Bobade, Vivek D.} } @article {48204, title = {Synthesis and characterization of partially biobased aromatic (Co)polycarbonates containing biphenylene units and pendant pentadecyl chains}, journal = {Macromolecular Chemistry and Physics}, volume = {223}, year = {2022}, month = {JUL}, pages = {2100449}, type = {Article}, abstract = {

2-Pentadecyl-[1,1{\textquoteright}{\textquoteright}-biphenyl]-4,4{\textquoteright}{\textquoteright}-diol (PBD) is synthesized starting from cashew nut shell liquid-a by-product of cashew processing industry. A new series of partially biobased aromatic (co)polycarbonates possessing biphenylene units and pendant pentadecyl chains is synthesized by solution polycondensation of PBD or varying compositions of PBD and bisphenol-A with triphosgene in dry dichloromethane. Inherent viscosities and number average molecular weights of (co)polycarbonates are in the range 0.51-1.24 dL g(-1) and 18 x 10(3)- 43.4 x 10(3) g mol(-1), respectively indicating the formation of reasonably high molecular weight polymers. Flexible, transparent, and free-standing films of (co)polycarbonates can be cast from chloroform solution. (Co)polycarbonates are characterized using Fourier transform infrared spectroscopy (FTIR), H-1 NMR, C-13 NMR spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry, and thermogravimetric analysis. T-10 and T-g values of (co)polycarbonates are in the range 417-433 and 8-147 degrees C, respectively. It is demonstrated that the T-g values can be tuned by incorporation of appropriate mol\% of PBD as a comonomer in Bisphenol-A-based copolycarbonates. The lowering of the T-g values of (co)polycarbonates can be attributed primarily to the packing disruptive effect of flexible pentadecyl chains. Furthermore, the effect of incorporation of PBD as a comonomer on water contact angle values of (co)polycarbonates is evaluated.

}, keywords = {aromatic polycarbonates, biobased bisphenol, Cashew nut shell liquid, pentadecyl chain, Renewable resources}, issn = {1022-1352}, doi = {10.1002/macp.202100449}, author = {Ichake, Amol B. and Nagane, Samadhan S. and Jadhav, Uday A. and Torris, Arun and Grau, Etienne and Cramail, Henri and Wadgaonkar, Prakash P.} } @article {48217, title = {Synthesis and crystal structures of Mn(II) and Co(II) complexes as catalysts for oxidation of cyclohexanone}, journal = {Inorganics}, volume = {10}, year = {2022}, month = {JUL}, pages = {100}, type = {Article}, abstract = {

The global demand on adipic usage in the production of plasticizers and synthetic polyamide is increasing. In line with the search for an efficient and energy-conserving way to isolate adipic acid (AA) in good yields, this paper introduces the oxidization of cyclohexanone utilizing two new coordination compounds, [Mn(2,6-pydc)(2)](imi) (1) and [Co(H(2)pza)(2)(H2O)(2)(NO3)].NO3 (2), as catalysts. Compounds 1 and 2 were synthesized by room temperature and refluxing methods, and characterized by spectral analyses (IR and UV-Vis.), SEM, BET, TGA, elemental, and X-ray crystallography. The single crystal structure of compound 1 revealed that pyridinedicarboxylate (2,6-pydc) and imidazole (imi) moieties were coordinated to the Mn(II) atom through imine nitrogen and deprotonated oxygen atoms, to form an undistorted octahedral coordination geometry with the N2O4 donor set. The axial and equatorial planes containing O2, O4, O5, and O7 atoms were from two adjacent 2,6-pydc ligands which formed the unidendate donor ligand; imi, on the other hand, acted as a bidendate donor ligand. For compound 2, the Co(II) atom was being coordinated by two pyrazinamide (H(2)pza) moieties, which acted as an unidendate donor ligand; two water molecules occupying the axial position, and one nitrate molecule occupying the apical position, were within the coordination sphere; a nitrate molecule was disordered outside the coordination sphere. The distance, 4.658 angstrom, between the Co1 atom and the N8 atom of the uncoordinated nitrate molecule, was within the range reported elsewhere. Cyclohexanone peroxidation experiments revealed that compound 1 exhibited unique catalytic performance by giving a 72.8\% yield in adipic acid, in comparison to the 71.3\% yield obtained with compound 2. The yields in AA were maintained by way of recyclability evaluation. The reaction kinetics of compound 2 gave less activation energy, E-a 2938 J mol(-1), while the thermodynamic parameters indicated that the chemical reactivity of cyclohexanone on the active surfaces of compounds 1 and 2 was via monolayer physisorption.

}, keywords = {cobalt, Complexes, cyclohexanone, Imidazole, managanese, Oxidation, pyrazinamide, pyridinedicarboxylate}, doi = {10.3390/inorganics10070100}, author = {Tella, Adedibu C. and Isaac, Aaron Y. and Clayton, Hadley S. and Ogunlaja, Adeniyi S. and Venugopalan, Aswathy T. and Prabu, Marimuthu and Thirumalaiswamy, Raja} } @article {48003, title = {Synthesis of a highly electron-deficient, water-stable, large ionic box: multielectron accumulation and proton conductivity}, journal = {Organic Letters}, volume = {24}, year = {2022}, month = {APR 19}, pages = {3038-3042}, type = {Article}, abstract = {

pi-acidic boxes exhibiting electron reservoir and proton conduction are unprecedented because of their instability in water. We present the synthesis of one of the strongest electron-deficient ionic boxes showing e(-) uptake as well as proton conductivity. Two large anions fit in the box to form anion-pi interactions and form infinite anion-solvent wires. The box with NO3-center dot center dot center dot water wires confers high proton conductivity and presents the first example that manifests redox and ionic functionality in an organic electron-deficient macrocycle.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.2c00993}, author = {Shukla, Jyoti and Illathvalappil, Rajith and Kumar, Sharvan and Chorol, Sonam and Pandikassala, Ajmal and Kurungot, Sreekumar and Mukhopadhyay, Pritam} } @article {46623, title = {Synthesis of new thiazole and pyrazole clubbed 1,2,3-triazol derivatives as potential antimycobacterial and antibacterial agents}, journal = {Polycyclic Aromatic Compounds}, volume = {42}, year = {2022}, month = {JUL}, pages = {3216-3237}, type = {Article}, abstract = {

New series of 4-methyl-2-(4-substituted phenyl)-5-(4-((4-(4-substituted phenyl)-1H-1,2,3-triazol-1-yl)methyl)-1-phenyl-1H-pyrazol-3-yl)thiazole, 6a-t and 4-(1,3-diphenyl-1H-pyrazol-4-yl)-1-((1,3-diphenyl-1H-pyrazol-4-yl)methyl )-1H-1,2,3-triazole, 11a-o derivatives have been synthesized by applying copper-catalyzed [3 + 2] cycloaddition reaction. The newly synthesized 1,3-thiazolyl-pyrazolyl-1,2,3-triazole (6a-t) and bis-pyrazolyl-1,2,3-triazole (11a-o) derivatives were screened for in vitro antimycobacterial activity against M. Tuberculosis H37Ra dormant and active and antibacterial activity against four pathogenic bacteria, E. coli (NCIM 2576), P. flurescence (NCIM 2059), S. aureus (NCIM 2602) and B. subtilis (NCIM 2162). Compounds 6a, 6f, 6j, 11e and 11m showed good activity against M tuberculosis H37Ra Active strain, also compounds 6g, 6h, 11f, 11n and 11o showed good activity against M tuberculosis H37Ra Dormant strain. Compounds 6b, 6i, 6l, 6o, 6r, 11k, 11l and 11m showed good activity against B. subtilis with IC50 1.99-2.96 mu g/mL. The antibacterial activity of thiazolyl-pyrazolyl-1,2,3-triazole and bis-pyrazolyl-1,2,3-triazole derivatives suggested that, these derivatives could lead to new compounds for treatment against bacterial infection.

}, keywords = {123-Triazole, antibacterial activity, antimycobacterial activity, Pyrazole, Thiazole}, issn = {1040-6638}, doi = {10.1080/10406638.2020.1857272}, author = {Jagadale, Shivaji M. and Abhale, Yogita K. and Pawar, Hari R. and Shinde, Abhijit and Bobade, Vivek D. and Chavan, Abhijit P. and Sarkar, Dhiman and Mhaske, Pravin C.} } @article {48432, title = {Synthesis of ternary cocrystals, salts, and hydrates of acefylline with enhanced dissolution and high permeability}, journal = {Crystal Growth \& Design}, volume = {22}, year = {2022}, month = {JUN}, pages = {4165{\textendash}4181}, abstract = {

Acefylline (ACF) is a stimulant xanthine derivative drug, which is formulated as a piperazine salt for the treatment of bronchial asthma. ACF falls under BCS class IV category of low solubility and poor permeability, which together limit the bioavailability and efficacy of the drug. In this work, ACF binary and ternary cocrystals, salts{\textendash}cocrystals, and their polymorphs are synthesized by cocrystallization with several coformers. Two different methods were adopted for the supramolecular assembly of the ternary systems A.B.C: (1) first, binary adducts A.B or A.C were crystallized by grinding a slurry of the components in a suitable solvent and then C was added and grinding was continued; and (2) all three components were taken in a solvent slurry and ground together. The former method was found to be superior in affording the ternary salt/cocrystal. The role of laboratory seeding is implicated to explain the variation in crystallization results at different stages of the project. Crystal structures of the product{\textquoteright}s binary and ternary systems were solved by single-crystal X-ray diffraction and powder X-ray diffraction data for structure solution. The crystal structures show the recurrence of carboxylate{\textendash}pyridinium and imidazole{\textendash}acid heterosynthons in the binary and ternary adducts. The intermolecular interactions between ACF and the coformer are analyzed by Hirshfeld surfaces, 2D fingerprint plots, and an energy framework. The permeability of ACF increases in binary and ternary systems with selected coformers. The fast dissolution and high permeability of ACF-PIP make this salt an improved crystalline formulation of acefylline.

}, doi = {10.1021/acs.cgd.2c00184}, author = {Allu, Suryanarayana and Garai, Abhijit and Chernyshev, Vladimir V. and Nangia, Ashwini K.} } @article {48181, title = {Tuning the hybridization and charge polarization in metal nanoparticles dispersed over Schiff base functionalized SBA-15 enhances CO2 capture and conversion to formic acid}, journal = {Journal of Materials Chemistry A}, volume = {10}, year = {2022}, month = {SEP}, pages = {18354-18362}, type = {Article}, abstract = {

Different Schiff base functionalized SBA-15 materials were synthesized through condensation reactions between 3-aminopropyltriethoxysilane (APTES) and different aldehydes (glutaraldehyde and butyraldehyde) over a mesoporous silica, SBA-15 (APTES-GLU/SBA-15 and APTES-BUT/SBA-15). Both static and dynamic experiments have been used for testing the CO2 capture efficiency of these materials. The hybridization of the N atom in APTES has been tuned from sp(3) to sp(2) upon condensation facilitating optimum CO2 capture in the direct synthesis of APTES-GLU/SBA-15. The undesirable oxides of nitrogen have been removed during the synthesis process to improve the CO2 capture efficiency. These materials were employed as supports for Pd-Ag and Pd-Ni bimetallic systems for the selective conversion of the captured CO2 to formic acid (FA) in 0.5 M KHCO3 solution. The Pd-Ni catalyst system exhibited enhanced CO2 to FA conversion activity compared to other heterogeneous systems, which is similar to 4 times better than that of the Pd-Ag system in this study. The X-ray absorption studies over the catalyst material confirmed that the relatively electron-deficient Ni in Pd-Ni compared to Ag in Pd-Ag favoured higher charge polarization between the metals in the Pd-Ni system enhancing the CO2 to FA conversion. The experimental observations are well supported by the DFT calculations.

}, issn = {2050-7488}, doi = {10.1039/d2ta03690h}, author = {Cherevotan, Arjun and Ray, Bitan and Yadav, Anish and Bagchi, Debabrata and Singh, Ashutosh Kumar and Riyaz, Mohd and Churipard, Sathyapal R. and Naral, Vinay and Kaur, Komalpreet and Gautam, Ujjal K. and Vinod, Chathakudath P. and Peter, Sebastian C.} } @article {48081, title = {Understanding unfolding and refolding of the antibody fragment (Fab) III: mapping covalent and non-covalent interactions during in-vitro refolding of light chain, heavy chain, and Fab.}, journal = {Biochemical Engineering Journal}, volume = {187}, year = {2022}, month = {NOV}, pages = {108644}, type = {Article}, abstract = {

In-vitro refolding of the antibody fragments from inclusion bodies is a critical manufacturing bottleneck. We have previously reported that Fab refolding involves the formation of an intermediate. To further decode the refolding pathway, we have mapped the covalent and non-covalent interactions during in-vitro refolding of individual light chain (LC), heavy chain (HC), and intact Fab. Intrinsic fluorescence analysis was performed to map the non -covalent interactions, whereas time-dependent disulfide mapping was performed using LC-MS/MS analysis under non-reducing and reducing atmospheres. Refolding of purified LC, HC, and intact Fab (Biosimilar rHu Ranibi-zumab) was investigated in the study. Under the reducing condition, LC, HC, and intact Fab required around 96, 30, and 70 h, respectively, whereas, under non-reducing conditions, they required only 48, 10, and 48 h, respectively, to acquire the native conformation. The disulfide bond mapping revealed that the bond between LC_Cys23/Cys88 is more unstable. The peptides mapped with the inter-chain disulfide bond were identified at 48 h during the refolding and can be considered as the rate-limiting step in (Fab) refolding. We have also studied a new refolding strategy involving assembly of separately refolded LC and HC into Fab molecule. In this case the Fab refolding yield was low (18.0 +/- 1.36\%), indicating inefficient assembly of refolded LC and HC chain into native Fab molecule.

}, keywords = {Antibody fragment, Disulfide bond formation, In-vitro refolding, Light and heavy chain, rHu Ranibizumab}, issn = {1369-703X}, doi = {10.1016/j.bej.2022.108644}, author = {Gani, Kayanat and Chirmade, Tejas and Ughade, Santosh and Thulasiram, Hirekodathakallu and Bhambure, Rahul} } @article {48011, title = {Understanding unfolding and refolding of the antibody fragments (Fab). II. Mapping intra and inter-chain disulfide bonds using mass spectrometry}, journal = {Biochemical Engineering Journal}, volume = {182}, year = {2022}, month = {MAY}, pages = {108439}, type = {Article}, abstract = {

Disulfide bond formation in recombinant protein therapeutics has a significant impact on the integrity and biological activity of the drug product. Formation of the disulfide linkage is the key rate-limiting step in in vitro refolding and overall manufacturing of the antibody fragments (Fab). This investigation is focused on mapping the intra, and inter-chain disulfide bonds in the in vitro refolded antibody fragments by using mass spectrometry (MS). Biosimilar rHu Ranibizumab and rHu Certolizumab expressed using E. coli were selected for the study. Both Fabs contain ten cysteine residues leading to two intra-chain disulfide bonds on each subunit and a single interchain disulfide linkage. rHu Certolizumab has an additional cysteine which is unpaired and used for pegylation. The amino acid sequence in the disulfide-bonded peptides was confirmed by Collision-induced dissociation (CID), Electron transfer dissociation (ETD) and High-energy collision dissociation (HCD). The light chain (LC) intra-chain disulfide is formed between Cys23-Cys88 and Cys134-Cys194 in both the Fabs. The heavy chain (HC) intra-chain disulfides are formed between Cys22-Cys96 and Cys150-Cys206 in rHu Ranibizumab. LC and HC subunits of rHu Ranibizumab are covalently linked by disulfide linkage formed between Cys214 of LC and Cys226 of HC. This study suggests that information from multiple MS platforms and orthogonal methods for peptide fragmentation can be effectively used to map disulfide linkages in biosimilar therapeutic proteins.

}, keywords = {Antibody fragments (Fab), Collision-induced dissociation, Electron transfer dissociation, High-energy collision dissociation, in vitro refolding, Ranibizumab}, issn = {1369-703X}, doi = {10.1016/j.bej.2022.108439}, author = {Nainwal, Neeraj and Chirmade, Tejas and Gani, Kayanat and Rana, Sunil and Bhambure, Rahul} } @article {47732, title = {Unraveling the reaction mechanism of selective C9 monomeric phenols formation from lignin using Pd-Al2O3-activated biochar catalyst}, journal = {Bioresource Technology}, volume = {344}, year = {2022}, month = {JAN}, pages = {126204}, type = {Article}, abstract = {The conversion of biomass-derived lignin to valuable monomeric phenols at high selectivity is of paramount importance for sustainable biorefineries. In this study, a novel Pd-Al2O3 supported on activated biochar catalyst is developed for lignin hydrogenolysis. The catalyst characterization revealed that the (1 1 1) planes of both of Pd-0 and Al2O3 were exposed to the surface. The maximum lignin conversion of 70.4\% along with high liquid yield (similar to 57 wt\%) was obtained at 240 degrees C, 3 h and 3 MPa H-2 pressure. The total monomeric phenols yield in the liquid was 51.6 wt\%, out of which C9 monomeric guaiacols constituted similar to 30.0 wt\% with 38.0\% selectivity to 4-propyl guaiacol. Using the reaction intermediate, coniferyl alcohol, chemoselective hydrogenation of C-alpha=C-beta is proved to occur over the Pd site, while dehydroxylation of C-gamma-OH is shown to occur over the alumina site. An impressive carbon atom economy of 60\% was achieved for the production of monomeric phenols.}, keywords = {Hydrogenolysis, lignin, Mechanism, Pd-Al/activated biochar, Propanol guaiacol, Propyl guaiacol}, issn = {0960-8524}, doi = {10.1016/j.biortech.2021.126204}, author = {Gurrala, L. and Kumar, M. M. and Yerrayya, Attada and Kandasamy, Prabu and Castano, Pedro and Raja, T. and Pilloni, Giovanni and Paek, C. and Vinu, R.} } @article {48436, title = {Viscoelastic liquid from regenerated silk fibroin in the silk i conformation: a writeable and shapeable material}, journal = {ACS Applied Polymer Materials}, volume = {4}, year = {2022}, month = {JUN}, pages = {4699{\textendash}4708}, type = {Article}, abstract = {

Regenerated silk fibroin (RSF) has acquired enormous attention because of its exceptional toughness, strength, and biocompatible nature. These properties make RSF a potential candidate for the fabrication of different types of materials. However, processing even a dilute aqueous solution of RSF leads to a conformational transformation from a random coil/helix-rich (silk I) to a beta-sheetrich (silk II) state. As a consequence, RSF tends to form aggregates and loses its toughness. Working in a direction to address this problem, an aqueous solution of regenerated silk fibroin has been modified with a dual layer of polyethylenimine (PEI) and a PEG-based polymer surfactant (PS). Upon freeze-drying, the RSF-polymer complex forms a solvent-free RSF bioconjugate system and exhibits a soft solid to liquid melting transition at similar to 45 degrees C. The sequential modification with PEI and PS preserves the native-like random coil conformation of RSF up to at least 8 months of storage by not allowing interchain interactions that can lead to aggregation. Rheological and small-angle X-ray scattering measurements show that the solvent-free system is viscoelastic and exhibits a higher order microstructure mediated by the packing of the PS chains, respectively. Temperature-dependent soft solid-liquid-like dual behavior offers applications in injection-based writing, compression molding, and shaping RSF bioconjugates into various types of geometries. Furthermore, the mechanical properties of the RSF bioconjugate system can be modulated by crosslinking with glutaraldehyde vapor at 50 degrees C.

}, keywords = {RSF liquid, RSF soft solid, silk I conformation, silk liquid, viscoelastic}, issn = {2637-6105}, doi = {10.1021/acsapm.2c00290}, author = {Kumar, Raj and Joseph, Emmanuel and Chaudhari, Atul and Nisal, Anuya and Sharma, Kamendra P.} } @article {48437, title = {Water-controlled keto-enol tautomerization of a prebiotic nucleobase}, journal = {Journal of Physical Chemistry B}, volume = {126}, year = {2022}, month = {JUL}, pages = {5735{\textendash}5743}, type = {Article}, abstract = {

Barbituric acid is believed to be a proto-RNA nucleobase that was used for biological information transfer on prebiotic earth before DNA and RNA in their present forms evolved. Nucleobases have various tautomeric forms and the relative stability of these forms is critical to their biological function. It has been shown that barbituric acid has a tri-keto form in the gas phase and an enol form in the solid state. However, its dominant tautomeric form in aqueous medium that is most relevant for biology has been investigated only to a limited extent and the findings are inconclusive. We have used multiple approaches, namely, molecular dynamics, quantum chemistry, NMR, and IR spectroscopy to determine the most stable tautomer of barbituric acid in solution. We find a delicate balance in the stability of the two tautomers, tri-keto and enol, which is tipped toward the enol as the extent of solvation by water increases.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.2c02507}, author = {Datar, Avdhoot and Paithankar, Harshad and Deb, Pranab and Chugh, Jeetender and Bagchi, Sayan and Mukherjee, Arnab and Hazra, Anirban} } @article {48810, title = {Aptamer tethered bio-responsive mesoporous silica nanoparticles for efficient targeted delivery of paclitaxel to treat ovarian cancer cells}, journal = {Journal of Pharmaceutical Sciences}, volume = {112}, year = {2023}, month = {MAY}, pages = {1450-1459}, type = {Article}, abstract = {

Ovarian cancer is the leading cause of cancer deaths in female patients. The current therapeutics in ovarian cancer are limited and inefficient in curing the disease. To tackle this, we have synthesized tetrasulfide deriv-ative of silica doped, biodegradable, glutathione-responsive targeted mesoporous silica nanoparticles modi-fied with heterobifunctional polyethylene glycol as a linker and mucin-1 aptamer for triggered paclitaxel delivery to the ovarian cancer cells. Degradable mesoporous silica nanoparticles were synthesized by a modi-fied sol-gel method with tetraethyl orthosilicate and Bis (triethoxysilylpropyl) tetrasulfide. The degradable mesoporous silica nanoparticles were characterized by dynamic light scattering, Fourier-transform infrared spectroscopy, Scanning electron microscopy and Transmission electron microscopy. The degradable mesopo-rous silica nanoparticles had good paclitaxel encapsulation efficiency and glutathione-responsive paclitaxel release ability. The glutathione utilization assay and visual destruction observed within 10 days in transmis-sion electron microscopy images confirmed the degradation of the mesoporous silica nanoparticles in the tumor cell environment. The targeted degradable mesoporous silica nanoparticles were efficiently taken up by ovarian cancer cell lines OVACAR-3 and PA-1. The cytotoxicity of bare mesoporous silica nanoparticles evaluated on NIH-3T3 cell line showed good biocompatibility (\>90\% cell viability). Significant toxicity on OVACAR-3 (IC50 25.66 nM) and PA-1 (IC50 42.93 nM) cell lines was observed when treated with paclitaxel-loaded targeted degradable mesoporous silica nanoparticles. Results of this study demonstrated that mucin-1 targeted, glutathione-responsive mesoporous silica nanoparticles loaded with paclitaxel had a significant antitumor effect on ovarian cancer cells. All these findings demonstrated that developed nano-formulation could be suitable for ovarian cancer treatment. \& COPY; 2023 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.

}, keywords = {Degradable, GSH, Mesoporous silica nanoparticles, Mucin-1, Ovarian cancer, Paclitaxel, Stimuli-responsive}, issn = {0022-3549}, doi = {10.1016/j.xphs.2023.01.011}, author = {Salve, Rajesh and Kumar, Pramod and Chaudhari, Bhushan P. and Gajbhiye, Virendra} } @article {48766, title = {Atomically dispersed manganese on graphene nanosheets as biocompatible nanozyme for glutathione detection in liver tissue lysate using microfluidic paper-based analytical devices}, journal = {ACS Applied Materials \& Interfaces}, volume = {15}, year = {2023}, month = {OCT }, pages = {47902-47920}, type = {Article}, abstract = {

Recently, single atom catalysts (SACs) featuring M-N-x (M = metal) active sites on carbon support have drawn considerable attention due to their promising enzyme-like catalytic properties. However, typical synthesis methods of SACs often involve energy-intensive carbonization processes. Herein, we report a facile one-pot, low-temperature, wet impregnation method to fully utilize M-N-4 sites of manganese phthalocyanine (MnPc) by decorating molecular MnPc over the sheets of graphene nanoplatelets (GNP). The synthesized MnPc@GNP exhibits remarkable peroxidase-mimic catalytic activity toward the oxidation of chromogenic 3,3 {\textquoteleft},5,5({\textquoteright})-tetramethylbenzidine (TMB) substrate owing to the efficient utilization of atomically dispersed Mn and the high surface-to-volume ratio of the porous catalyst. A nanozyme-based colorimetric sensing probe is developed to detect important biomarker glutathione (GSH) within only 5 min in solution phase based on the ability of GSH to effectively inhibit the TMB oxidation. The high sensitivity and selectivity of the developed colorimetric assay enable us to quantitatively determine GSH concentration in different biological fluids. This work, for the first time, reports a rapid MnPc@GNP nanozyme-based colorimetric assay in the solid substrate by fabricating microfluidic paper-based analytical devices (mu PADs). GSH is successfully detected on the fabricated mu PADs coated with only 6.0 mu g of nanozyme containing 1.6 nmol of Mn in the linear range of 0.5-10 mu M with a limit of detection of 1.23 mu M. This work also demonstrates the quantitative detection of GSH in mice liver tissue lysate using mu PADs, which paves the way to develop mu PADs for point-of-care testing.

}, keywords = {colorimetricsensing, Glutathione, mu PADs, nanozyme, single atom catalyst, tissue lysate}, issn = {1944-8244}, doi = {10.1021/acsami.3c08762}, author = {Baruah, Diksha J. and Thakur, Ashutosh and Roy, Esha and Roy, Kallol and Basak, Sumanjita and Neog, Dipankar and Bora, Himangsu K. and Konwar, Rituraj and Chaturvedi, Vikash and Shelke, Manjusha V. and Das, Manash R.} } @article {48704, title = {Baby step in assembling and integrating the components of an artificial photosynthesis device with forced heterojunctions towards improved efficiency}, journal = {Journal of Materials Chemistry A}, volume = {11}, year = {2023}, month = {JUL }, pages = {15168-15182}, type = {Article}, abstract = {

How to achieve unassisted, economical, scalable, and sustainable artificial photosynthesis for liquid fuels/products with improved solar-to-fuel efficiency (STFE) to address a carbon-neutral economy remains a big question. To a large degree, the extent of charge separation at heterojunction interfaces and charge utilization determine the STFE. Towards this, BiVO3 is assembled from ionic-precursors into TiO2 pores, and integrated structurally and electronically with TiO2 on calcination as BiVO4 quantum dots (BVQDs). BVQDs in TiO2 (BVT) pores lead to an all-inorganic system with a sub-quadrillion number of heterojunctions in a 1 cm(2) device (contains similar to 25 mu g of BiVO4 (similar to 2.5 wt\%) in the nanopores of similar to 975 mu g of TiO2 (similar to 97.5 wt\%)) and facilitate artificial photosynthesis. We demonstrate 31-38\% STFE with a photon to chemical conversion turn over frequency (ToF(P2C)) of 2.73 s(-1) with a 1 cm(2) wireless BiVO4-TiO2 artificial leaf (BVT-AL) device for HCHO and CH3OH. The sequential nature of CO2 reduction to HCHO and then to CH3OH is evident from the reaction results. (CO2)-C-13 isotopic labeling experiments confirm that the input CO2 is the source for product formation. A large increase in the photocurrent density and incident photon-to-current efficiency (IPCE) of BVT, over 100\% for the BiVO4 photoanode in visible light, demonstrates and supports efficient visible light absorption, charge separation and migration to the redox sites. A device has been demonstrated to show sustainable activity in direct sunlight, and addresses scalability from 1 to 9 cm(2). Assuming no change (50\% decrease) in the STFE, a 6.74 m(2) device is expected to convert 1 (0.5) kg h(-1) CO2 into C1-oxygenates in sunlight. DFT calculations carried out with anatase TiO2 (101) and BiVO4 (121) interfaces support many of the experimental findings, including electron flow from the latter to the former, and interaction of the oxygen of TiO2 with BiVO4 and vice versa at the interface towards forced heterojunctions.

}, issn = {2050-7488}, doi = {10.1039/d3ta01850d}, author = {Salgaonkar, Kranti N. and Bajpai, Himanshu and Mhamane, Nitin B. and Nalajala, Naresh and Chauhan, Inderjeet and Thakkar, Kavita and Joshi, Kavita and Gopinath, Chinnakonda S.} } @article {48804, title = {Bacopa monnieri reduces Tau aggregation and Tau-mediated toxicity in cells}, journal = {International Journal of Biological Macromolecules}, volume = {234}, year = {2023}, month = {APR}, pages = {123171}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is a neurodegenerative disease characterized by progressive memory loss and behavioral impairments. In the present study, the ethanolic extract of Bacopa monnieri was studied for its potency to inhibit Tau aggregation and rescuing of the viability of Tau-stressed cells. Bacopa monnieri was observed to inhibit the Tau aggregation in vitro. The cells exposed to Bacopa monnieri were also observed to have a low level of ROS and caspase-3 activity. The immunoblot and immunofluorescence analysis showed that Bacopa monnieri acts as an antioxidant and restored the Nrf2 levels in Neuro2a cells. Bacopa monnieri treatment to Neuro2a cells was observed to reduce the phospho-Tau load in formaldehyde-stressed cells. Furthermore, the treatment of Bacopa monnieri reduced the phosphorylation of GSK-3 beta in formaldehyde-stressed cells. Ran and NUP358 are the key proteins involved in nuclear transport. It was observed that formaldehyde treatment impaired the nuclear transport by missorting the NUP358 arrangement in Neuro2a cells. On the contrary, Bacopa monnieri treatment restored the NUP358 arrangement in cells. The overall results of the present study suggested that Bacopa monnieri could be considered a potent herb against Tau phosphorylation and Tau aggregation, which projects it as a promising formulation for Alzheimer{\textquoteright}s disease.

}, keywords = {Bacopa monnieri, GSK-3 beta, Nrf2, Nuclear transport, NUP358, Tau Aggregation, Tau phosphorylation}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.123171}, author = {Dubey, Tushar and Kushwaha, Preeti and Thulasiram, H. V. and Chandrashekar, Madhura and Chinnathambi, Subashchandrabose} } @article {48465, title = {Benign strategy toward mesoporous carbon coated Sb nanoparticles: a high-performance Li-ion/Na-ion batteries anode}, journal = {Solid State Ionics}, volume = {396}, year = {2023}, month = {AUG}, pages = {116243}, type = {Article}, abstract = {

Antimony (Sb)-based anodes can offer excellent gravimetric capacity (-660 mAhg(1)) in lithium-ion/sodium-ion batteries (LIBs/SIBs) fabricated using carbonate-based electrolytes complexed with lithium/sodium salt. However, high first-cycle irreversible loss (35-40\%) and gradual capacity fade (25-30\%/cycle) originate from solid electrolyte interphase (SEI), and severe volumetric stress (-300\%) associated with alloyed phase(s) impede reallife applications. Herein, we devise a benign strategy to develop mesoporous carbon coating onto antimony nanoparticles (Sb@C) based core-shell architecture for LIBs/SIBs anode. In particular, -30-50 nm thick mesoporous carbon spheres (-1 +/- 0.5 mu m) were obtained from resorcinol-formaldehyde (RF)-based polycondensation reaction by sol-gel chemistry engulfing Sb nanoparticles by suitably controlling Cetyltrimethylammonium bromide (CTAB)-induced steric stabilization and pH modulation during synthesis. The core-shell Sb@C helps faster Li+/Na+-ion migration preventing the structural collapse of Sb during electrochemical cycling and thereby improving the capacity fade. Electrochemical results demonstrate Sb@C can deliver a specific capacity of -536 mAhg(-1) and - 291 mAhg(-1) at 0.1C current rate in LIBs and SIBs, respectively, up to 200 cycles. Electrochemical impedance spectroscopy (EIS) indicates lower charge transfer (Rct) and SEI resistance (RSEI) of Sb@C cycled electrode than the bare Sb-NPs was the probable reason for improved Li/Na-ion storage in Sb@C anode. A detailed galvanostatic intermittent titration technique (GITT) and internal resistance measurements during 1st and 2nd cycles shed light on distinguishably different Li-ion/Na-ion storage behavior. The bulk Li+/Na+-ion diffusion coefficients found diminishes at reaction voltages (0.9 V/0.6 V for lithiation and 0.6 V/0.4 V for sodiation) corresponding with alloyed phase(s) concurrent with a drop in internal resistance at the quasi-opencircuit voltage (QOCV) during 1st and 2nd discharge cycle. On the contrary, de-alloying phenomena from the fully lithiated/sodiated phase(s) display an entirely opposite trend. The Li+ diffusion coefficient reaches minima at -1.1 V with a sudden jump in the internal resistance at QOCV during 1st and 2nd charge cycle. However, Na+ diffusion coefficient gradually drops along with a steep increase in the internal resistance, indicating partial Naion trapping and irreversible capacity loss.

}, keywords = {anode, Antimony, lithium-ion batteries, mesoporous carbon, Sodium-ion batteries}, issn = {0167-2738}, doi = {10.1016/j.ssi.2023.116243}, author = {Dashairya, Love and Chaturvedi, Vikash and Kumar, Abhishek and Mohanta, Tandra Rani and Shelke, Manjusha and Saha, Partha} } @article {48749, title = {Biosynthesis of gold nanoparticles by Penicillium rubens and catalytic detoxification of ochratoxin A and organic dye pollutants}, journal = {International Microbiology}, volume = {26}, year = {2023}, month = {NOV}, pages = {765-780}, type = {Article}, abstract = {

The environmental pollution caused by chemical dyes is a growing concern nowadays. Limitations of traditional methods opened the route for nanotechnology; owing to the versatile properties of nanomaterials, gold nanoparticles (AuNPs) became a potential strategy for different applications. In the present study, biosynthesis of gold nanoparticles (BioAuNPs) was carried out by reacting chloroauric acid (HAuCl4) with cell-free filtrate of Penicillium rubens sp. nov. NCIM 1937. The AuNPs were then characterized by UV-visible spectroscopy, HR-TEM, FTIR, and DLS analysis to further examine their efficacious biosynthesis and morphological properties including size, shape, and stability. The biogenic AuNPs are polydisperse in nature, with a mean size of 14.92 +/- 5 nm. These AuNPs exhibited promising antimicrobial activity against Escherichia coli NCIM-2065, Bacillus subtilis NCIM-2010, and Penicillium verrucosum MTCC 4935. In vitro quantitative HPLC results revealed that BioAuNPs significantly inhibited the biosynthesis of ochratoxin A (OTA). Microbial fuel cells (MFCs) are intriguing for power generation and wastewater treatment since they can directly transform chemical energy stored in organic matter to electricity by extracellular electron transfer (EET) via membrane proteins. AuNPs also showed excellent potential for dye degradation of organic pollutants, viz., methylene blue (MB), phenol red (PR), bromothymol blue (BTB), Congo red (CR), and 4-nitrophenol (4-NP). All dye removal efficiencies were estimated and fitted to pseudo-first-order processes using kinetic rate constants (Ka).The present study reveals a simple, original, and eco-friendly method for the synthesis of multifunctional biogenic AuNPs that could be effective in OTA detoxification in food products and organic pollutant removal during wastewater treatment for a sustainable environment.

}, keywords = {Catalytic organic dye degradation, gold nanoparticles, Ochratoxin A, Penicillium rubens, Penicillium verrucosum}, issn = {1139-6709}, doi = {10.1007/s10123-023-00341-5}, author = {Bhandari, Yogesh and Varma, Sanjana and Sawant, Amol and Beemagani, Sreelatha and Jaiswal, Neha and Chaudhari, Bhushan P. and Vamkudoth, Koteswara Rao} } @article {48330, title = {Carbon encapsulated NiCo2S4 nanoparticles with enhanced surface mediated charge storage for superior ultracapacitor electrodes}, journal = {Chemistry-An Asian Journal}, volume = {18}, year = {2023}, month = {APR}, type = {Article}, abstract = {

Three different compositions of NiCo2S4 (NCS) materials were prepared using three solvents, named NCS HTDI (hydrothermal in DI water), NCS STEG (solvothermal in ethylene glycol), and a novel carbon-encapsulated NCS STFA (solvothermal in formamide). The structural and morphological properties of the prepared NCS HTDI, NCS STEG, and NCS HTDI materials were analyzed using various physical characterization techniques. As prepared, NCS materials were tested as an electrode for supercapacitor (SC) application using a 3-electrode system in a basic electrolyte (3 M KOH). NCS HTDI exhibits a specific capacitance of 2536 F g(-1), NCS STEG shows 1355 F g(-1), and NCS STFA shows 1178 F g(-1) at an input current density of 1 A g(-1). The SBN-PSC material is utilized as a counter electrode in the NCS STFA || SBN-PSC-based asymmetric SC device. The device exhibits exceptionally superior electrochemical performance with a specific capacitance of 172 F g(-1) at 10 A g(-1) input current density and 97\% capacity retention after 5000 cycles in a voltage window of 1.6 V. The results confirm the superiority of NCS STFA||SBN-PSC deviceas an excellent high-energy and high-power SC.

}, keywords = {Asymmetric supercapacitor device, NiCo2S4, pseudocapacitor, Surface charge storage}, issn = {1861-4728}, doi = {10.1002/asia.202300121}, author = {Chaturvedi, Vikash and Pawar, Meenakshi and Thripuranthaka, M. and Shivade, Rajkiran and Shelke, Manjusha V. V.} } @article {48318, title = {Challenges and emerging strategies for next generation liposomal based drug delivery: an account of the breast cancer conundrum}, journal = {Chemistry and Physics of Lipids}, volume = {250}, year = {2023}, month = {JAN}, pages = {105258}, type = {Article}, abstract = {

The global cancer burden is witnessing an upsurge with breast cancer surpassing other cancers worldwide. Furthermore, an escalation in the breast cancer caseload is also expected in the coming years. The conventional therapeutic regimens practiced routinely are associated with many drawbacks to which nanotechnological in-terventions offer a great advantage. But how eminent could liposomes and their advantages be in superseding these existing therapeutic modalities? A solution is reflected in this review that draws attention to a decade-long journey embarked upon by researchers in this wake. This text is a comprehensive discussion of liposomes, the front runners of the drug delivery systems, and their active and passive targeting approaches for breast cancer management. Active targeting has been studied over the decade by many receptors overexpressed on the breast cancer cells and passive targeting with many drug combinations. The results converge on the fact that the actively targeted formulations exhibit a superior efficacy over their non-targeted counterparts and the all lipo-somal formulations are efficacious over the free drugs. This undoubtedly underlines the dominion of liposomal formulations over conventional chemotherapy. These investigations have led to the development of different liposomal formulations with active and passive targeting capacities that could be explored in depth. Acknowl-edging and getting a deeper insight into the liposomal evolution through time also unveiled many imperfections and unchartered territories that can be explored to deliver dexterous liposomal formulations against breast cancer and more in the clinical trial pipeline.

}, keywords = {Breast cancer, Liposomal metamorphosis, Receptor-ligand dynamics, Targeted Drug Delivery}, issn = {0009-3084}, doi = {10.1016/j.chemphyslip.2022.105258}, author = {Moudgil, Aliesha and Salve, Rajesh and Gajbhiye, Virendra and Chaudhari, Bhushan P.} } @article {48302, title = {Comparison of the solid-state and submerged fermentation derived secretomes of hyper-cellulolytic Penicillium janthinellum NCIM 1366 reveals the changes responsible for differences in hydrolytic performance}, journal = {Bioresource Technology}, volume = {371}, year = {2023}, month = {MAR}, pages = {128602}, type = {Article}, abstract = {

better hydrolytic performance along with a higher initial rate of reaction. Secretome analyses of the SSF and SmF enzymes using LC/MS-MS, indicated that while the type of proteins secreted were similar in both modes, the abundance of specific beta glucosidases, lytic polysaccharide monooxygenases and hemicellulolytic enzymes were very high in SSF resulting in efficient initiation, low accumulation of cellobiose and high initial reaction rates. Key enzymes that catalyse lignocellulose breakdown under SSF and SmF are therefore different and the fungus may be speculated to have regulation mechanisms that aid differential expression under different culti

}, keywords = {Cellulase, Solid -state fermentation}, issn = {0960-8524}, doi = {10.1016/j.biortech.2023.128602}, author = {Sankar, Meena and Mathew, Reshma M. and Puthiyamadam, Anoop and Sreeja-Raju, Athiraraj and Christopher, Meera and Gokhale, Digambar Vitthal and Sukumaran, Rajeev K.} } @article {48319, title = {Comprehensive molecular and clinical investigation of approved Anti-HCV drugs repurposing against SARS-CoV-2 infection: a glaring gap between benchside and bedside medicine}, journal = {Vaccines}, volume = {11}, year = {2023}, month = {MAR}, pages = {515}, type = {Article}, abstract = {

The limited availability of effective treatment against SARS-CoV-2 infection is a major challenge in managing COVID-19. This scenario has augmented the need for repurposing anti-virals for COVID-19 mitigation. In this report, the anti-SARS-CoV-2 potential of anti-HCV drugs such as daclatasvir (DCV) or ledipasvir (LDP) in combination with sofosbuvir (SOF) was evaluated. The binding mode and higher affinity of these molecules with RNA-dependent-RNA-polymerase of SARS-CoV-2 were apparent by computational analysis. In vitro anti-SARS-CoV-2 activity depicted that SOF/DCV and SOF/LDP combination has IC50 of 1.8 and 2.0 mu M, respectively, comparable to remdesivir, an approved drug for COVID-19. Furthermore, the clinical trial was conducted in 183 mild COVID-19 patients for 14 days to check the efficacy and safety of SOF/DCV and SOF/LDP compared to standard of care (SOC) in a parallel-group, hybrid, individually randomized, controlled clinical study. The primary outcomes of the study suggested no significant difference in negativity after 3, 7 and 14 days in both treatments. None of the patients displayed any worsening in the disease severity, and no mortality was observed in the study. Although, the post hoc exploratory analysis indicated significant normalization of the pulse rate showed in SOF/DCV and SOF/LDP treatment vs. SOC. The current study highlights the limitations of bench side models in predicting the clinical efficacy of drugs that are planned for repurposing.

}, keywords = {antiviral, COVID-19, daclatasvir, ledipasvir, SARS-CoV-2, sofosbuvir}, doi = {10.3390/vaccines11030515}, author = {Bansode, Sneha and Singh, Pawan Kumar and Tellis, Meenakshi and Chugh, Anita and Deshmukh, Narendra and Gupta, Mahesh and Verma, Savita and Giri, Ashok and Kulkarni, Mahesh and Joshi, Rakesh and Chaudhary, Dhruva} } @article {48283, title = {Computational insights into the iron-catalyze d magnesium-me diate d hydroformylation of alkynes}, journal = {Journal of Organometallic Chemistry}, volume = {986}, year = {2023}, month = {FEB}, pages = {122621}, type = {Article}, abstract = {

Iron is one of the most abundant transition metals in the earth{\textquoteright}s crust. It has attracted a lot of attention due to its low toxicity, bio-compatibility, and high natural abundance. Iron-catalyzed hydroamination, hydroalkoxylation, hydrocarboxylation, hydrosilylation, hydroboration, hydrophosphination, hydromagnesiation, and carbonylation reactions have therefore been developed over the past decades. However, despite many experimental and theoretical studies, a complete mechanistic understanding of iron-catalyzed hydrofunctionalisation at the molecular level has not yet been achieved. In this work, through density functional theory (DFT) calculations, we have shown the most feasible path for the hydroformylation of alkynes for an experimentally studied system. We have looked at the iron salt as a precatalyst without any external donor ligand, and the calculations revealed that hydrometalation followed by beta-hydride elimination was favorable over the direct migration of the beta-hydrogen to carbon. Furthermore, our calculations show that the solvent plays an important role in the hydromagnesiation reaction. Furthermore, we have employed an explicit solvent model, where the attachment of one molecule of solvent to the iron center was seen to stabilize the transition states significantly.(c) 2023 Elsevier B.V. All rights reserved.

}, keywords = {Computational study, Ethylene Assisted Catalysis, EtMgBr Assistance, Explicit Role of Solvent, Hydroformylation, Iron Catalyst}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2023.122621}, author = {Sharma, Himanshu and Tewari, Tanuja and Chikkali, Samir H. and Vanka, Kumar} } @article {48833, title = {Covalent organic framework thin-film photodetectors from solution-processable porous nanospheres}, journal = {Journal of the American Chemical Society}, volume = {145}, year = {2023}, month = {JAN}, pages = {1649-1659}, type = {Article}, abstract = {

The synthesis of homogeneous covalent organic framework (COF) thin films on a desired substrate with decent crystallinity, porosity, and uniform thickness has great potential for optoelectronic applications. We have used a solution-processable sphere transmutation process to synthesize 300 +/- 20 nm uniform COF thin films on a 2 x 2 cm2 TiO2-coated fluorine-doped tin oxide (FTO) surface. This process controls the nucleation of COF crystallites and molecular morphology that helps the nanospheres to arrange periodically to form homogeneous COF thin films. We have synthesized four COF thin films (TpDPP, TpEtBt, TpTab, and TpTta) with different functional backbones. In a close agreement between the experiment and density functional theory, the TpEtBr COF film showed the lowest optical band gap (2.26 eV) and highest excited-state lifetime (8.52 ns) among all four COF films. Hence, the TpEtBr COF film can participate in efficient charge generation and separation. We constructed optoelectronic devices having a glass/FTO/TiO2/COF-film/Au architecture, which serves as a model system to study the optoelectronic charge transport properties of COF thin films under dark and illuminated conditions. Visible light with a calibrated intensity of 100 mW cm-2 was used for the excitation of COF thin films. All of the COF thin films exhibit significant photocurrent after illumination with visible light in comparison to the dark. Hence, all of the COF films behave as good photoactive substrates with minimal pinhole defects. The fabricated out-of-plane photodetector device based on the TpEtBr COF thin film exhibits high photocurrent density (2.65 +/- 0.24 mA cm-2 at 0.5 V) and hole mobility (8.15 +/- 0.64 x10-3 cm2 V-1 S-1) compared to other as synthesized films, indicating the best photoactive characteristics.

}, issn = {0002-7863}, doi = {10.1021/jacs.2c09838}, author = {Bag, Saikat and Sasmal, Himadri Sekhar and Chaudhary, Sonu Pratap and Dey, Kaushik and Blaette, Dominic and Guntermann, Roman and Zhang, Yingying and Poloz, Miroslav and Kuc, Agnieszka and Shelke, Ankita and Vijayaraghavan, Ratheesh K. and Ajithkumar, Thalasseril G. and Bhattacharyya, Sayan and Heine, Thomas and Bein, Thomas and Banerjee, Rahul} } @article {48474, title = {Design and synthesis of piano-stool ruthenium(II) complexes and their studies on the inhibition of amyloid ? (1-42) peptide aggregation}, journal = {International Journal of Biological Macromolecules}, volume = {239}, year = {2023}, month = {JUN }, pages = {124197}, type = {Article}, abstract = {

Misfolding , protein aggregation have been linked to numerous human neurodegenerative disorders such as Alzheimer{\textquoteright}s, prion , Parkinson{\textquoteright}s diseases. Ruthenium (Ru) complexes have received considerable attention in studying protein aggregation due to their interesting photophysical and photo properties. In this study, we have synthesized the novel Ru complexes ([Ru(p-cymene)Cl(L-1)][PF6](Ru-1), and [Ru(p-cymene)Cl(L-2)][PF6](Ru-2)) and investigated their inhibitory activity against the bovine serum albumin (BSA) aggregation and the A beta 1-42 peptides amyloid formation. Several spectroscopic methods were used to characterize these complexes, and the molecular structure of the complex was determined by X-ray crystallography. Amyloid aggregation and inhi-bition activities were examined using the Thioflavin-T (ThT) assay, and the secondary structures of the protein were analyzed by circular dichroism (CD) spectroscopy and transmission electron microscopy (TEM). The cell viability assay was carried out on the neuroblastoma cell line, revealing that the complex Ru-2 showed better protective effects against A beta 1-42 peptide toxicity on neuro-2a cells than the complex Ru-1. Molecular docking studies elucidate the binding sites and interactions between the Ru-complexes and A beta 1-42 peptides. The exper-imental studies revealed that these complexes significantly inhibited the BSA aggregation and A beta 1-42 amyloid fibril formation at 1:3 and 1:1 molar concentrations, respectively. Antioxidant assays demonstrated that these complexes act as antioxidants, protecting from amyloid-induced oxidative stress. Molecular docking studies with the monomeric A beta 1-42 (PDB: 1IYT) show hydrophobic interaction, and both complexes bind preferably in the central region of the peptide and coordinate with two binding sites of the peptide. Hence, we suggest that the Ru-based complexes could be applied as a potential agent in metallopharmaceutical research against Alzheimer{\textquoteright}s disease.

}, keywords = {Aggregation, Amyloid ?(1-42) peptide, DFT computation, Fibrillization, Molecular docking, Ruthenium complexes}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.124197}, author = {Singh, Sain and Navale, Govinda R. and Agrawal, Sonia and Singh, Haobam Kisan and Singla, Labhini and Sarkar, Dhiman and Sarma, Manabendra and Choudhury, Anghuman Roy and Ghosh, Kaushik} } @article {48705, title = {Does variation in composition affect dynamics when approaching the eutectic composition?}, journal = {Journal of Chemical Physics}, volume = {158}, year = {2023}, month = {MAR}, pages = {114203}, type = {Article}, abstract = {

Deep eutectic solvent is a mixture of two or more components, mixed in a certain molar ratio, such that the mixture melts at a temperature lower than individual substances. In this work, we have used a combination of ultrafast vibrational spectroscopy and molecular dynamics simulations to investigate the microscopic structure and dynamics of a deep eutectic solvent (1:2 choline chloride: ethylene glycol) at and around the eutectic composition. In particular, we have compared the spectral diffusion and orientational relaxation dynamics of these systems with varying compositions. Our results show that although the time-averaged solvent structures around a dissolved solute are comparable across compositions, both the solvent fluctuations and solute reorientation dynamics show distinct differences. We show that these subtle changes in solute and solvent dynamics with changing compositions arise from the variations in the fluctuations of the different intercomponent hydrogen bonds.

}, issn = {0021-9606}, doi = {10.1063/5.0139153}, author = {Chatterjee, Srijan and Chowdhury, Tubai and Bagchi, Sayan} } @article {48830, title = {Early cellular events and potential regulators of cellulase induction in Penicillium janthinellum NCIM 1366}, journal = {Scientific Reports}, volume = {13}, year = {2023}, month = {MAR}, pages = {5057}, type = {Article}, abstract = {

Cellulase production by fungi is tightly regulated in response to environmental cues, and understanding this mechanism is a key pre-requisite in the efforts to improve cellulase secretion. Based on UniProt descriptions of secreted Carbohydrate Active enZymes (CAZymes), 13 proteins of the cellulase hyper-producer Penicillium janthinellum NCIM 1366 (PJ-1366) were annotated as cellulases- 4 cellobiohydrolases (CBH), 7 endoglucanases (EG) and 2 beta glucosidases (BGL). Cellulase, xylanase, BGL and peroxidase activities were higher for cultures grown on a combination of cellulose and wheat bran, while EG was stimulated by disaccharides. Docking studies indicated that the most abundant BGL- Bgl2- has different binding sites for the substrate cellobiose and the product glucose, which helps to alleviate feedback inhibition, probably accounting for the low level of glucose tolerance exhibited. Out of the 758 transcription factors (TFs) differentially expressed on cellulose induction, 13 TFs were identified whose binding site frequencies on the promoter regions of the cellulases positively correlated with their abundance in the secretome. Further, correlation analysis of the transcriptional response of these regulators and TF-binding sites on their promoters indicated that cellulase expression is possibly preceded by up-regulation of 12 TFs and down-regulation of 16 TFs, which cumulatively regulate transcription, translation, nutrient metabolism and stress response.

}, issn = {2045-2322}, doi = {10.1038/s41598-023-32340-x}, author = {Christopher, Meera and Sreeja-Raju, Athiraraj and Abraham, Amith and Gokhale, Digambar Vitthal and Pandey, Ashok and Sukumaran, Rajeev K.} } @article {48748, title = {Elevated level of glycated KQTALVELVK peptide of albumin is associated with the risk of diabetic nephropathy}, journal = {ACS Omega}, volume = {8}, year = {2023}, month = {JUN }, pages = {20654-20660}, type = {Article}, abstract = {

Diabetic nephropathyis a leading cause of end-stagerenal disease.Hence, early detection of diabetic nephropathy is essential to mitigatethe disease burden. Microalbuminuria, the currently used diagnosticmarker of diabetic nephropathy, is not efficient in detecting it atan early stage. Therefore, we explored the utility of glycated humanserum albumin (HSA) peptides for risk prediction of diabetic nephropathy.Three glycation-sensitive HSA peptides, namely, FKDLG-EENFK,KQTAL-VELVK, and KVPQVST-PTLVEVSR, with deoxyfructosyllysine(DFL) modification were quantified by targeted mass spectrometry (MS)in a study population comprising healthy and type II diabetes subjectswith and without nephropathy. Mass spectrometry, receiver operatingcharacteristic (ROC) curve, and correlation analysis revealed thatthe DFL-modified KQTALVELVK peptide was better than other glycatedHSA peptides and HbA(1c) for identifying diabetic nephropathy.DFL-modified KQTALVELVK could be a potential marker for risk predictionof diabetic nephropathy.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c01219}, author = {Chaurasiya, Arvindkumar H. and Jaiswal, Meera R. and Bayatigeri, Santhakumari and Kahar, Shweta and Tiwari, Shalbha and Unnikrishnan, Ambika G. and Kulkarni, Mahesh J.} } @conference {48799, title = {Fast normalization and despeckled method for skin optical coherence tomography image via deep learning}, booktitle = {Photonics in Dermatology and Plastic Surgery 2023}, year = {2023}, month = {JUL}, publisher = {SPIE}, organization = {SPIE}, address = {1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA}, abstract = {

Optical coherence tomography (OCT) is well-known for its high-resolution, non-invasive imaging modality with many medical uses, including skin imaging. Nevertheless, speckle noise limits the analytical capabilities of this imaging tool, causing deterioration in contrast and less exact detection of tissue microstructural heterogeneity. To address this issue, we proposed OCT despeckling approach by combing it with normalization to reduce the speckle noise more effectively. The proposed method contains multiple steps including phase correlation for alignment of misaligned frames, frame averaging which minimizes speckle noise, region-wise pixels normalization that helps to normalize intensity pixels, a modified BM3D filtering to suppress the white and speckle, and contrast enhancement to improve the contrast appropriately. To establish the approach, we applied 130 distinct B-scan skin OCT images and validate and evaluate the performance using qualitatively and quantitatively. Although the output obtained by the algorithm is promising, the method is time-consuming because of a series of steps. To reduce the time complexity, we also develop a supervised deep learning model by mapping between noisy-despeckled image pairs. The effectiveness and applicability of our DL approach were assessed using 130 skin OCT B-scans from various body areas taken from 45 healthy people between the ages of 20 and 60. With the support of the experimental results, we demonstrate that our DL model is capable to normalize and despeckling OCT images simultaneously.

}, keywords = {CNN, deep learning, denoising, Optical coherence tomography, speckle}, isbn = {978-1-5106-5809-7; 978-1-5106-5810-3}, doi = {10.1117/12.2651211}, author = {Rahaman, Jarjish and Lukas, Brandon and May, Julia and Puyana, Carolina and Tsoukas, Maria and Avanaki, Kamran}, editor = {Choi, B and Zeng, H} } @article {48338, title = {G4-binding drugs, chlorpromazine and prochlorperazine, repurposed against COVID-19 infection in hamsters}, journal = {Frontiers in Molecular Biosciences}, volume = {10}, year = {2023}, month = {MAR }, pages = {1133123}, type = {Article}, abstract = {

The COVID-19 pandemic caused by SARS-CoV-2 has caused millions of infections and deaths worldwide. Limited treatment options and the threat from emerging variants underline the need for novel and widely accessible therapeutics. G-quadruplexes (G4s) are nucleic acid secondary structures known to affect many cellular processes including viral replication and transcription. We identified heretofore not reported G4s with remarkably low mutation frequency across \>5 million SARS-CoV-2 genomes. The G4 structure was targeted using FDA-approved drugs that can bind G4s - Chlorpromazine (CPZ) and Prochlorperazine (PCZ). We found significant inhibition in lung pathology and lung viral load of SARS-CoV-2 challenged hamsters when treated with CPZ or PCZ that was comparable to the widely used antiviral drug Remdesivir. In support, in vitro G4 binding, inhibition of reverse transcription from RNA isolated from COVID-infected humans, and attenuated viral replication and infectivity in Vero cell cultures were clear in case of both CPZ and PCZ. Apart from the wide accessibility of CPZ/PCZ, targeting relatively invariant nucleic acid structures poses an attractive strategy against viruses like SARS-CoV-2, which spread fast and accumulate mutations quickly.

}, keywords = {Conserved motif, FDA-approved drugs, G-quadruplex binding drugs, hamster model of COVID-19, RNA G-quadruplex}, doi = {10.3389/fmolb.2023.1133123}, author = {Roy, Shuvra Shekhar and Sharma, Shalu and Rizvi, Zaigham Abbas and Sinha, Dipanjali and Gupta, Divya and Rophina, Mercy and Sehgal, Paras and Sadhu, Srikanth and Tripathy, Manas Ranjan and Samal, Sweety and Maiti, Souvik and Scaria, Vinod and Sivasubbu, Sridhar and Awasthi, Amit and Harshan, Krishnan H. and Jain, Sanjeev and Chowdhury, Shantanu} } @article {48337, title = {Gas sensors and factors influencing sensing mechanism with a special focus on MOS sensors}, journal = {Journal of Materials Science}, volume = {58}, year = {2023}, month = {JAN}, pages = {559-582}, type = {Review}, abstract = {

Industrialization and its progress are very important for the economy and to move towards prosperity, stimulating innovation and creating jobs. Nonetheless, industrialization has negative impacts, if not done judiciously, such as pollution, increased greenhouse gas emissions, and global warming. Therefore, amenity-with-security is of fundamental significance in a new and dynamic lifestyle. A gas sensor is one of the crucial devices for monitoring and subsequently preserving the clean atmosphere among a number of other safety technologies. In-depth assessments of gas sensors and their necessity in the environment (air) pollution are provided in the current review. With a special emphasis on metal oxide semiconductor (MOS)-based gas sensors, the review includes a thorough study of gas sensors and the factors relating to sensing mechanisms. It not only describes the basic concepts and brief history of gas sensors, but also highlights the schemes responsible for improving the gas sensing properties and state-of-art literature review. These schemes include (1) surface engineering/morphological tuning and (2) bulk and surface doping. To keep scientific rigour and in-depth analyses, this review focuses on these two schemes only. In the doping area, the emphasis is given on graphene loading, decorated with nanoparticles of noble metals, spillover mechanism, and heterojunction (p-n, n-n, and p-p) formation. The conclusion summarizes the most optimized MOS gas sensors with enhanced gas sensing capabilities. The emphasis is given to formulate the article in such a way that it will be useful for the beginners who wish to explore the gas sensor research field, as well as to the established researchers to further improve the sensing capabilities of MOS gas sensors.

}, issn = {0022-2461}, doi = {10.1007/s10853-022-08072-0}, author = {Nadargi, Digambar Y. Y. and Umar, Ahmad and Nadargi, Jyoti D. D. and Lokare, Smita A. A. and Akbar, Sheikh and Mulla, Imtiaz S. S. and Suryavanshi, Sharad S. S. and Bhandari, Nagesh L. L. and Chaskar, Manohar G. G.} } @article {48739, title = {Green adeptness in synthesis of non-toxic copper and cobalt oxide nanocomposites with multifaceted bioactivities}, journal = {Cancer Nanotechnology}, volume = {14}, year = {2023}, month = {DEC}, pages = {79}, type = {Article}, abstract = {

Background: In the present era, we are facing different health problems mainly concerning with drug resistance in microorganisms as well as in cancer cells. In addition, we are also facing the problems of controlling oxidative stress and insect originated diseases like dengue, malaria, chikungunya, etc. originated from mosquitoes. In this investigation, we unfurled the potential of Achatina fulica mucus in green synthesis of mucus mediated copper oxide bio-nanocomposites (SM-CuONC) and cobalt oxide bio-nanocomposites (SM-Co3O4NC). Herein we carried out the physico-chemical characterization like UV-Vis spectra, X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM), Energy Dispersive X-ray Analysis (EDAX) and X-ray photoelectron spectroscopy (XPS) of as synthesized bio-nanocomposites. Both the bio-nanocomposites were tested for their potential as antimicrobial activity using well diffusion assay, anticancer activity by MTT assay, antioxidant activity by phosphomolybdenum assay and mosquito larvicidal activity.Results: The results of this study revealed that, SM-CuONC and SM-Co3O4NC were synthesized successfully using A. fulica mucus. The FESEM and TEM data reveal the formation of nanoparticles with quasi-spherical morphology and average particle size of similar to 18 nm for both nanocomposites. The EDAX peak confirms the presence of elemental copper and cobalt in the analyzed samples. The X-ray diffraction analysis confirmed the crystalline nature of the CuO and Co3O4. The result of anti microbial study exhibited that, SM-CuONC showed maximum antimicrobial activity against Escherichia coli NCIM 2065 and Aspergillus fumigatus NCIM 902 which were noted as 2.36 +/- 0.31 and 2.36 +/- 0.59 cm resp. at 60 mu g/well concentration. The result of anticancer activity for SM-CuONC was exhibited as, 68.66 +/- 3.72, 62.66 +/- 3.61 and 71.00 +/- 2.36 percent kill, while SM-Co3O4NC exhibited 61.00 +/- 3.57, 72.66 +/- 4.50 and 71.66 +/- 4.22 percent kill against Human colon cancer (HCT-15), Cervical cancer (HeLa), and Breast cancer (MDA-MB-231) cell lines, respectively, at 20 mu g/well concentration. Both the nanocomposites also exhibited better antioxidant activity. Total antioxidant activity for SM-CuONC at 50 mu g/ml concentration was found to be highest as 55.33 +/- 3.72 while that of SM-Co(3)O(4)Ns was 52.00 +/- 3.22 mM of ascorbic acid/mu g respectively. Both bio-nanocomposites also exhibited 100\% mosquito larvicidal activity at concentration ranging from 40 to 50 mg/l. During cytotoxicity study it is noted that at 5 mu g/well concentration, SM-CuO and SM-Co3O4NCs suspension showed more than 97\% viability of normal (L929) cell lines. We also studied phytotoxicity of both bio-nanocomposites on Triticum aestivum. In this study, 100\% seed germination was observed when seeds are treated with SM-CuONC and SM-Co3O4NC at 500 mg/l and 250 mg/l concentration respectively.Conclusions: This study concludes that in future as synthesized SM-CuONC and SM-Co3O4NC can be used in pharmaceutical, health care system for betterment and welfare of human life as both bio-nanocomposites exhibits better antimicrobial, anticancer, antioxidant and mosquito larvicidal potential.

}, keywords = {Achatina fulica mucus, Bio-nanocomposites, Biological activities, Characterization, Toxicity}, issn = {1868-6958}, doi = {10.1186/s12645-023-00226-2}, author = {Mane, Pramod C. and Kadam, Deepali D. and Khadse, Ashok N. and Chaudhari, Aditya R. and Ughade, Supriya P. and Agawane, Sachin B. and Chaudhari, Ravindra D.} } @article {48448, title = {Hydroxide ion-conducting viologen-bakelite organic frameworks for flexible solid-state zinc-air battery applications}, journal = {Nanoscale Horizons}, volume = {8}, year = {2023}, month = {JAN }, pages = {224-234}, type = {Article}, abstract = {

Adaptable polymer-based solid-state electrolytes can be a game-changer toward safe, lightweight flexible batteries. We present a robust Bakelite-type organic polymer covalently decked with viologen, triazine, and phenolic moieties. Its flexible structure with cationic viologen centers incorporates counter-balancing free hydroxide ions into the polymeric framework. By design, the aromatic groups and heteroatoms in the framework can be activated under an applied potential to prompt a push-pull drive, setting off the towing of hydroxide ions via weak electrostatic, van der Waals, and hydrogen-bond interactions. The frontier orbitals from a DFT-modeled structure certify this. The hydroxyl-polymer requires minimal KOH wetting to maintain a humid environment for Grotthuss-type transport. The hydroxide ion conductivity reaches a value of 1.4 x 10(-2) S cm(-1) at 80 degrees C and 95\% RH, which is retained for over 15 h. We enhanced its practical utility by coating it as a thin solid-state separator-cum-electrolyte on readily available filter paper. The composite exhibits a conductivity of 4.5 x 10(-3) S cm(-1) at 80 degrees C and 95\% RH. A zinc-air battery (ZAB) constructed using this polymer-coated paper as electrolyte yields a maximum power density of 115 mW cm(-2) and high specific capacitance of 435 mA h g(-1). The power density recorded for our ZAB is among the best reported for polymer electrolyte-based batteries. Subsequently, the flexible battery fabricated with IISERP-POF11_OH@FilterPaper exhibits an OCV of 1.44 V, and three batteries in series power a demo traffic signal. To underscore the efficiency of hydroxide ion transport through the complex multifunctional backbone of the polymer, we calculated the diffusion coefficient for OH- (Exp: 2.9 x 10(-5) cm(2) s(-1); Comp. 5.2 x 10(-6) cm(2) s(-1)) using electrochemical methods and MD simulations. Climbing-edge NEB calculations reveal a large energy barrier of 2.11 eV for Zn2+ to penetrate the polymer and identify hydroxide ions within the polymer, suggesting no undesirable Zn2+ crossover. Our findings assert the readily accessible C-C-linked cationic polymer{\textquoteright}s capacity as a solid-state electrolyte for ZABs and any anion-conducting membrane.

}, issn = {2055-6756}, doi = {10.1039/d2nh00455k}, author = {Rase, Deepak and Illathvalappil, Rajith and Singh, Himan Dev and Shekhar, Pragalbh and Leo, Liya S. and Chakraborty, Debanjan and Haldar, Sattwick and Shelke, Ankita and Ajithkumar, Thalasseril G. and Vaidhyanathan, Ramanathan} } @article {48754, title = {Identification of G-quadruplex structures in MALAT1 lncRNA that interact with nucleolin and nucleophosmin}, journal = {Nucleic Acids Research}, volume = {51}, year = {2023}, month = {SEP}, pages = {9415-9431}, type = {Article}, abstract = {

Nuclear-retained long non-coding RNAs (lncRNAs) including MALAT1 have emerged as critical regulators of many molecular processes including transcription, alternative splicing and chromatin organization. Here, we report the presence of three conserved and thermodynamically stable RNA G-quadruplexes (rG4s) located in the 3 \& PRIME; region of MALAT1. Using rG4 domain-specific RNA pull-down followed by mass spectrometry and RNA immunoprecipitation, we demonstrated that the MALAT1 rG4 structures are specifically bound by two nucleolar proteins, Nucleolin (NCL) and Nucleophosmin (NPM). Using imaging, we found that the MALAT1 rG4s facilitate the localization of both NCL and NPM to nuclear speckles, and specific G-to-A mutations that disrupt the rG4 structures compromised the localization of both NCL and NPM in speckles. In vitro biophysical studies established that a truncated version of NCL (\& UDelta;NCL) binds tightly to all three rG4s. Overall, our study revealed new rG4s within MALAT1, established that they are specifically recognized by NCL and NPM, and showed that disrupting the rG4s abolished localization of these proteins to nuclear speckles

}, issn = {0305-1048}, doi = {10.1093/nar/gkad639}, author = {Ghosh, Arpita and Pandey, Satya Prakash and Joshi, Dheeraj Chandra and Rana, Priya and Ansari, Asgar Hussain and Sundar, Jennifer Seematti and Singh, Praveen and Khan, Yasmeen and Ekka, Mary Krishna and Chakraborty, Debojyoti and Maiti, Souvik} } @article {48761, title = {Identification of new modulator of DNA repairing pathways based on natural product ({\textpm})-peharmaline A}, journal = {Bioorganic \& Medicinal Chemistry}, volume = {91}, year = {2023}, month = {AUG}, pages = {117365}, type = {Article}, abstract = {

The complex heterogenic environment of tumour mass often leads to drug resistance and facilitate chemo insensitivity triggering more malignant phenotypes among cancer patients. Major DNA-damaging cancer drugs have been consistently proven unsuccessful in terms of elevating chemo-resistance. (\& PLUSMN;)-peharmaline A, a hybrid natural product isolated from seeds of Peganum harmala L. possesses significant cytotoxic activities. Herein, we have described the design, and synthesis of a novel library of close and simplified analogues around the anticancer natural product (\& PLUSMN;)-peharmaline A and investigated their cytotoxic activities, which led to the identification of three structurally simplified lead compounds exhibiting better potency than parent natural product. Among them, demethoxy analogue of peharmaline A was further investigated for its anticancer potential eliciting demethoxy analogue as potent DNA-damage inducing agent attenuating the expression of the proteins responsible for the DNA damage repair. Therefore, this demethoxy analogue warrants detailed investigations for the confirmations of the molecular mechanism-based studies responsible for its anticancer activity.

}, keywords = {DNA damage, EMT, Pictet, Spengler reaction, Structure-activity relationship, Total synthesis}, issn = {0968-0896}, doi = {10.1016/j.bmc.2023.117365}, author = {Kulkarni, Akshay S. and Dash, Anshurekha and Shingare, Rahul D. and Chand, Jagdish and Manhas, Diksha and Singh, Aman and Nandi, Utpal and Goswami, Anindya and Reddy, D. Srinivasa} } @article {48808, title = {Inhibition of amyloid β1-42 peptide aggregation by newly designed cyclometallated palladium complexes}, journal = {International Journal of Biological Macromolecules}, volume = {248}, year = {2023}, month = {SEP }, pages = {125847}, type = {Article}, abstract = {

Uncontrolled amyloid aggregation is a frequent cause of neurodegenerative disorders such as prions and Alzheimer{\textquoteright}s disease (AD). As a result, many drug development approaches focus on evaluating novel molecules that can alter self-recognition pathways. Herein, we designed and synthesized the cyclometallated pyrene (Pd-1 and Pd-3) and anthracene (Pd-2) based palladium complexes ([Pd((L-1)Cl] Pd-1, [Pd(L-2)Cl](Pd-2), and [Pd(L-3)Cl] (Pd-3)). This study explores the effect of these complexes on the aggregation, fibrillation, and amyloid formation of bovine serum albumin (BSA) and A beta(1-42) peptide. Several spectroscopic methods were used to characterize all the Pd-complexes, and the molecular structure of Pd -3 was determined by X-ray crystallography. The secondary structures were studied using circular dichroism (CD) and transmission electron microscopy (TEM), while am-yloid aggregation and inhibitory activities were investigated using the Thioflavin-T (ThT) fluorescence assay. Molecular docking of the Pd-complex (Pd-3) was done using fibril (PDB: 2BEG) and monomeric (PDB: 1IYT) peptides using Auto-dock Vina. As a result, the hydrogen bonding and hydrophobic interaction between the aromatic rings of the Pd-complexes and the amino acids of amyloid-beta peptides significantly reduced the pro-duction of ordered beta-sheets of amyloid fibrils and protein aggregation in the presence of Pd-2 and Pd-3 complexes.

}, keywords = {A beta(1-42) peptide, Aggregation and molecular docking, Palladium complex}, issn = {0141-8130}, doi = {10.1016/j.ijbiomac.2023.125847}, author = {Saini, Rahul and Navale, Govinda R. and Singh, Sain and Singh, Haobam Kisan and Chauhan, Rahul and Agrawal, Sonia and Sarkar, Dhiman and Sarma, Manabendra and Ghosh, Kaushik} } @article {48315, title = {Interactive study of Au-20 nanocluster and methyl substituted amide linked tyrosine/tryptophan to develop representative model for studying protein-nanoparticle interaction}, journal = {Journal of Molecular Structure}, volume = {1272}, year = {2023}, month = {JAN}, pages = {134177}, type = {Article}, abstract = {

Investigations on UV-vis, steady-state fluorescence and synchronous fluorescence properties of human hemoglobin (HHb) reveals greater spectral shifts in peaks arising due to alterations in microenvironment of Tyr-compared to Trp-during interactions with gold nanoparticle (GNP). Besides, interactions of Au-20 nanocluster with modified Tyr/Trp (possessing methyl substituted amide bonds) by quantum chemical calculations demonstrate significant role of amide bonds and the spectral shift, binding energy and alteration in bond distances appear to be higher for modified Tyr-compared to modified Trp. Moreover, close resemblance of frequency shift of modified Tyr/Trp-in presence of Au 20 is observed with respect to the experimental FT-IR study of HHb upon interaction with GNP, suggesting participation of amide bonds in both cases. Furthermore, CD DFT calculations using optimized helical stretch of HHbin presence of Au-20 and experimental CD results of HHb in presence of GNP further indicate participation amide bonds and biocompatibility of GNP. Apparently, the theoretical and experimental interactions are going in good agreement with each other. Overall, the study of interactions of modified Tyr/Trp-as representative models of protein microenvironment and Au-20 nanocluster as prototype of GNP to develop models for exploring protein nanoparticle interactions has been highlighted. (C) 2022 Elsevier B.V. All rights reserved.

}, keywords = {amide bonds, Au-20 nanocluster, Gold nanoparticle, Human hemoglobin, Modified Tyr/Trp}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2022.134177}, author = {Sen Banerjee, Nineesha and Ghosh, Deborin and Mitra, Ishani and Paul, Somnath and Show, Bibhutibhushan and Ganguly, Tapan and Chakraborty, Madhurima} } @article {48693, title = {Iron-catalysed highly selective hydroalkoxycarbonylation of alkynes using CO as C1 source}, journal = {Catalysis Science \& Technology}, volume = {13}, year = {2023}, month = {OCT }, pages = {5549-5555}, type = {Article}, abstract = {

Though precious and rare, late-transition metals have been extensively used in metal-catalysed carbonylation reactions in organic transformations. On the other hand, base metals are abundant and cheap, but their practical utilization in carbonylation reactions is rarely explored. Here, we report iron-catalysed hydroalkoxycarbonylation of alkynes to alpha,beta-unsaturated esters in one pot. A readily available iron precursor [Fe2(CO)9] in the presence of a diimine ligand L7 catalyzes the conversion of alkynes to alpha,beta-unsaturated esters under 10 bar CO pressure. This operationally simple protocol tolerates various functional groups and allows facile access to about 40 alpha,beta-unsaturated esters. The synthetic utility of the reaction has been demonstrated by scaling up the reaction to 1 g and by preparing sunscreen/antifungal agents. The kinetic study suggests that the reaction is an approximate 1st order with respect to the iron catalyst, and the initial rate of the reaction is 3.6 x 10-2 M h-1. Mechanistic investigations using NMR spectroscopy indicated the existence of an [Fe-H] intermediate, and control experiments using a radical trapping reagent and EPR revealed the absence of any radical species in the reaction. Precious and rare, late transition metals have been extensively used in carbonylation. An earth abundant iron-catalyst is reported here for hydroalkoxycarbonylation of alkynes in the presence of CO as C1 source.

}, issn = {2044-4753}, doi = {10.1039/d3cy00843f}, author = {Tewari, Tanuja and Kumar, Rohit and Chikkali, Samir H.} } @article {48311, title = {Iron-catalyzed magnesium-mediated formal hydroformylation of alkynes and alkenes}, journal = {ChemCatChem}, volume = {15}, year = {2023}, month = {FEB }, type = {Article}, abstract = {

Alkynes and alkenes are routinely converted to corresponding synthetically versatile aldehydes using rhodium-catalyzed hydroformylation. However, rhodium is rare, precious, costly, and depleting at a considerably high rate. Reported here is iron-catalyzed, magnesium-mediated, formal hydroformylation of alkynes and alkenes in the absence of syngas. Readily available FeCl2 in the presence of alkyl magnesium halide, and dimethyl formamide, catalyzes hydroformylation of various alkynes and selectively produces alpha,beta-unsaturated aldehydes in good to excellent conversion. Mechanistic investigations revealed the presence of vinyl magnesium intermediate, the kinetic study disclosed the first-order dependence of the reaction on iron loading, and the control experiment authenticated the iron catalyst{\textquoteright}s homogeneous nature. The scope of this methodology was amplified, and 20 alkenes were examined. [Fe(acac)(3)] in the presence of ligand, alkyl magnesium halide, and dimethyl formamide catalyzed the hydroformylation of alkenes and displayed good to excellent conversion. An earth-abundant iron catalyst offering a syngas cylinder-free safe alternative to high-pressure hydroformylation has been reported.

}, keywords = {aldehydes, alkenes, Alkynes, Hydroformylation, iron catalysis}, issn = {1867-3880}, doi = {10.1002/cctc.202201394}, author = {Tewari, Tanuja and Kumar, Rohit and Chikkali, Samir H.} } @article {48341, title = {Lead-free solid state mechanochemical synthesis of Cs2NaBi1-XFeXCl6 double perovskite: reduces band gap and enhances optical properties}, journal = {Inorganic Chemistry}, volume = {62}, year = {2023}, month = {MAR}, pages = {4861-4871}, type = {Article}, abstract = {

Efficient and stable lead-free halide double perovskites (DPs) have attracted great attention for the future generation of electronic devices. Herein, we have developed a doping approach to incorporate Fe3+ ions into the Cs2NaBiCl6 crystal unit and reveal a crystallographic and optoelectronic study of the Cs2NaBi1-xFexCl6 double perovskite. We report a simple solid-state mechanochemical method that has a solvent-free, one-step, green chemistry approach for the synthesis of Cs2NaBi1-xFexCl6 phosphor. The analysis of powder X-ray diffraction (XRD) data determines the contraction of the lattice due to the incorporation of Fe3+ cations, and this effect is well supported by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and solid-state nuclear magnetic resonance spectroscopy (ss-NMR). The band gap is reduced with increasing Fe content owing to the strong overlap of the Fe-3d orbitals with Cl-3p orbitals and shift of the valence band maxima (VBM) toward higher energies, as confirmed by ultraviolet photoelectron spectroscopy (UPS) and density functional theory (DFT) analyses. Photoluminescence (PL) studies of Cs2NaBi1-xFexCl6 phosphors exhibit a large Stokes shift, broadband emission, and increased PL intensity more than ten times for 15\% of Fe content phosphor with enhancement in the average decay lifetimes (up to 38 ns) compared to pristine Cs2NaBiCl6 DP. These results indicate that the transition of dark self-trapping of excitons (STEs) into bright STEs enhances yellow emission. XRD, UV, and thermo-gravimetric analysis (TGA) confirmed that the Cs2NaB1-xFexCl6 DPs have good structural and thermal stabilities. Our findings indicate that the doping of Fe3+ cations into the Cs2NaBiCl6 lattice is a constructive strategy to enhance significantly the optoelectronic properties of these phosphors.

}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.2c04149}, author = {Udavant, Rohini and Thawarkar, Sachin and Rondiya, Sachin and Shelke, Ankita and Aher, Rahul and Ajithkumar, Thalasseril G. and Cross, Russell W. and Dzade, Nelson Y. and Jadkar, Sandesh} } @article {48735, title = {Made to measure squaramide COF cathode for zinc dual-ion battery with enriched storage via redox electrolyte}, journal = {Advanced Energy Materials}, volume = {13}, year = {2023}, month = {SEP}, type = {Article}, abstract = {

Aqueous rechargeable batteries are promising grid-scale energy storage devices because of their affordability, operational safety, and environmental benignity. Among these, Zn-ion batteries (ZIBs) have unfolded new horizons. Designing superior cathodes for ZIBs is crucial. Covalent organic frameworks (COFs) can be made redox active with a high storage surface. Here, for the first time, a chelating COF with redox-active ZnI2 in a ZnSO4(aq) electrolyte is combined. Including iodide harvests an approximately threefold enhancement in capacity from 208 to 690 mAh g(-1) at 1.5 A g(-1), the highest among all the COF-derived ZIBs. Remarkably, a charge-discharge curve at 1.3 V exhibits very limited dropout voltage and super-flat platform, with a remarkable capacity of 600 mAh g(-1) at 5 A g(-1) stable up to 6000 cycles, confirming that the polyiodide generation and storage are sustainable. The COF{\textquoteright}s dual-ion storage (Zn2+ and polyidode) delivers a ZIB with the highest energy density. Spectro-electrochemical measurements coupled with X-ray photoelectron spectroscopy unambiguously unveil the existence of multiple polyiodide species, with I-3(-) and IO3- ions as the prominent species. The latter gets reduced at the COF electrode under an applied potential, leaving I-3(-) as the major species stored on the COF. The prospect of COF-polyiodide((aq)) is a windfall for metal-ion batteries.

}, keywords = {covalent organic frameworks, flexible batteries, polyiodide, redox electrolytes, Zn ion batteries}, issn = {1614-6832}, doi = {10.1002/aenm.202301049}, author = {Kushwaha, Rinku and Jain, Chitvan and Shekhar, Pragalbh and Rase, Deepak and Illathvalappil, Rajith and Mekan, Deep and Camellus, Augastus and Vinod, Chathakudath Prabhakaran and Vaidhyanathan, Ramanathan} } @article {48756, title = {Mechanistic insights into near ambient pressure activity of intermetallic NiZn/TiO2 catalyst for CO2 conversion to methanol}, journal = {ChemCatChem}, volume = {15}, year = {2023}, month = {JAN }, type = {Article}, abstract = {

Ni-Zn pair is predicted through descriptor-based studies to be conducive for CO2 hydrogenation. In this study, NiZn (1 : 1) intermetallics supported on TiO2 is identified as a potential candidate for near ambient pressure activity. The effect of reduction temperature on the catalyst textural properties as well as on CO2 to methanol reduction are explored. Structural and microscopic studies provide clear evidence of phase evolution of NiZn alloy with increasing reduction temperatures, along with phase variations of Zn based oxides. Interface between NiZn intermetallics and ZnO nanoparticles observed at reduction temperature of 550 degrees C, seems to play a crucial role in making this system most active and selective to methanol. In addition, in-situ IR studies provide mechanistic insights and indicates the formation of methanolic species even at ambient pressure.

}, keywords = {CCUS, CO2, In-situ IR, Methanol, near ambient pressure}, issn = {1867-3880}, doi = {10.1002/cctc.202201150}, author = {Dongapure, Pavan and Tekawadia, Jyoti and Thundiyil, Shibin and Caha, Ihsan and Deepak, Francis Leonard and Devi, R. Nandini} } @article {48708, title = {Metal-catalyzed plastic depolymerization}, journal = {Cell Reports Physical Science}, volume = {4}, year = {2023}, month = {MAY}, pages = {101341}, type = {Review}, abstract = {

Polymers have become an indispensable part of our daily lives, and today we produce around 370 MT of plastic per year. Only about 20\% of it is being recycled, and the rest, 80\%, is unleashed into the environment without appropriate treatment. This calls forth the evaluation of strategies available for mitigating the menace of {\textquoteleft}{\textquoteleft}after-use{\textquoteright}{\textquoteright}plastic waste. Various approaches have evolved over a decade and are at different levels of development. Plastic depolymerization and upcycling are considered some of the most prominent and long-term solutions. The metal-catalyzed depolymerization of plastic waste to chemical feedstocks has emerged as one of the promising ways to address global plastic pollution. Therefore, this review aims to examine the available metal-catalyzed depolymerization methods, notify recent progress, pinpoint current gaps, and gauge the potential of this strategy. Both homogeneous and heterogeneous catalysts have been reported to depolymerize various polymers over the last decade. Considerable advances have been reported in the metal-mediated depolymerization of polyolefins, polyesters, polycarbonates, polyurethanes, polyamides, and polyethers. The depolymerization of the above polymers produces the monomers or intermediates, which can be used again for polymerization and thus brings the waste polymers back into circularity. The overview debates the usage of high temperaagents, etc., in metal-catalyzed depolymerization. Thus, this review summarizes the current understanding of the fundamental science of metal-catalyzed plastic depolymerization, the remaining scientific challenges, and the potential opportunities.

}, doi = {10.1016/j.xcrp.2023.101341}, author = {Khopade, Kishor V. and Chikkali, Samir H. and Barsu, Nagaraju} } @article {48468, title = {Microglia degrade Tau oligomers deposit via purinergic P2Y12-associated podosome and filopodia formation and induce chemotaxis}, journal = {Cell and Bioscience}, volume = {13}, year = {2023}, month = {MAY}, pages = {95}, type = {Article}, abstract = {

BackgroundTau protein forms neurofibrillary tangles and becomes deposited in the brain during Alzheimer{\textquoteright}s disease (AD). Tau oligomers are the most reactive species, mediating neurotoxic and inflammatory activity. Microglia are the immune cells in the central nervous system, sense the extracellular Tau via various cell surface receptors. Purinergic P2Y12 receptor can directly interact with Tau oligomers and mediates microglial chemotaxis via actin remodeling. The disease-associated microglia are associated with impaired migration and express a reduced level of P2Y12, but elevate the level of reactive oxygen species and pro-inflammatory cytokines.ResultsHere, we studied the formation and organization of various actin microstructures such as-podosome, filopodia and uropod in colocalization with actin nucleator protein Arp2 and scaffold protein TKS5 in Tau-induced microglia by fluorescence microscopy. Further, the relevance of P2Y12 signaling either by activation or blockage was studied in terms of actin structure formations and Tau deposits degradation by N9 microglia. Extracellular Tau oligomers facilitate the microglial migration via Arp2-associated podosome and filopodia formation through the involvement of P2Y12 signaling. Similarly, Tau oligomers induce the TKS5-associated podosome clustering in microglial lamella in a time-dependent manner. Moreover, the P2Y12 was evidenced to localize with F-actin-rich podosome and filopodia during Tau-deposit degradation. The blockage of P2Y12 signaling resulted in decreased microglial migration and Tau-deposit degradation.ConclusionsThe P2Y12 signaling mediate the formation of migratory actin structures like- podosome and filopodia to exhibit chemotaxis and degrade Tau deposit. These beneficial roles of P2Y12 in microglial chemotaxis, actin network remodeling and Tau clearance can be intervened as a therapeutic target in AD.

}, keywords = {Filopodia, microglia, migration, Podosome, Tau Oligomers}, doi = {10.1186/s13578-023-01028-0}, author = {Chinnathambi, Subashchandrabose and Das, Rashmi} } @article {48781, title = {Nanopore sequencing of RAGE gene polymorphisms and their association with type 2 diabetes}, journal = {ACS Omega}, volume = {8}, year = {2023}, month = {JUL}, pages = {25727-25738}, type = {Article}, abstract = {

The receptor foradvanced glycation end products (RAGE)is a transmembraneprotein that interacts with its ligands, advanced glycation end products(AGEs). AGEs are elevated in diabetes and diabetic complications,leading to increased oxidative stress and activation of pro-inflammatorypathways facilitated by AGE-RAGE signaling. Polymorphisms inthe RAGE gene can potentially affect AGE-RAGEinteraction and its downstream signaling, which plays a crucial rolein the progression of diabetes and its complications. In this study,we used nanopore sequencing for genotyping of RAGE polymorphism and identified a maximum number of 33 polymorphisms,including two previously unreported novel mutations in a cohort ofhealthy, type 2 diabetics without nephropathy and type 2 diabeticswith nephropathy in order to identify associations. Two novel RAGE polymorphisms in the intron 8 and 3 \& PRIME;UTR regionat genomic locations 32181834 and 32181132, respectively, were detectedwith a low frequency. For four previously reported polymorphisms,cross-validation by PCR-RFLP showed 99.75\% concordance with nanoporesequencing. Analysis of genotype distribution and allele frequenciesrevealed that five single nucleotide polymorphisms, i.e., rs1800625,rs3131300, rs3134940, rs2070600, and rs9391855, were associated withan increased risk for type 2 diabetes.

}, issn = {2470-1343}, doi = {10.1021/acsomega.3c00297}, author = {Chaurasiya, Arvindkumar H. and Khilari, Ajinkya A. and Kazi, Rubina and Jaiswal, Meera R. and Bhoite, Gouri M. and Padwal, Meghana K. and Momin, Abdulrahaman A. and Shanmugam, Dhanasekaran and Kulkarni, Mahesh J.} } @article {48272, title = {Nanostructured Co-doped BiVO4 for efficient and sustainable photoelectrochemical chlorine evolution from simulated sea-water}, journal = {Dalton Transactions}, volume = {52}, year = {2023}, month = {FEB}, pages = {2051-2061}, type = {Article}, abstract = {

The co-production of hydrogen and chlorine from sea-water splitting could be a potential, sustainable and attractive route by any method. However, challenges to overcome are many, and critically, the sustainability and operating potential of the electrocatalyst are important. In this work, we report on Co-doping in the BiVO4 (Co-BV) crystal lattice and employed the same as the photoanode; Co-BV exhibits a photocurrent of 190 mu A cm(-2) at 1.1 V vs. RHE (the reversible hydrogen electrode) in the acidic sodium chloride solution (pH 2.3) under one sun illumination. The best-performing photoanode, with 0.05 mol\% of Co doping (0.05 Co-BV), selectively produced active chlorine with 92\% faradaic efficiency at 1.1 V vs. RHE by successfully suppressing the kinetically sluggish oxygen evolution reaction (OER) and the stability of the catalyst was demonstrated for up to 20 h. This is the lowest operating potential reported for the chlorine evolution reaction (CER), thus far. The overpotential required for CER with 0.05 Co-BV is lower than that of OER, which leads to selective CER at 1.1 V (vs. RHE). Co-doping into the BiVO4 lattice decreases the charge transfer resistance and enhances the CER kinetics due to its structural and electronic integration with the BV lattice. We demonstrate that Co-doping also improves the lifetime of the charge carrier and enhances the current density of CER and sustainability of the catalyst.

}, issn = {1477-9226}, doi = {10.1039/d2dt03369k}, author = {Chauhan, Inderjeet and Patra, Kshirodra Kumar and Bajpai, Himanshu and Mhamane, Nitin B. and Salgaonkar, Kranti N. and Gopinath, Chinnakonda S.} } @article {48667, title = {Non-confined gamma monoclinic sulfur cathode in carbonate electrolyte based room temperature K-S batteries}, journal = {JOURNAL OF MATERIALS CHEMISTRY A}, volume = {11}, year = {2023}, month = {JUL}, pages = {15924-15930}, type = {Article}, abstract = {

Potassium-sulfur cells have garnered a lot of interest in grid storage chemistry due to the high abundance of both elements and hence their low cost. However, their development is hindered by the polysulfide shuttle effect and their dependency on electrolytes with limited commercial viability. The inability to use carbonate electrolytes is due to the irreversible reaction between it and PS, rendering the cell useless in the first few cycles. Here we expand our use of monoclinic \& gamma;-sulfur in carbon nanofibers (\& gamma;S-CNFs) to the potassium-sulfur, K-S, chemistry. Herein we show that using \& gamma;-S enables the cells to run for 500 cycles at \& SIM;900 mA h g(-1) in commercial carbonate electrolytes. We further attempt to understand the role of \& gamma;S-CNFs in K-S cells with electrochemical characterization and postmortem spectroscopy. As far as we are aware this is the first application of \& gamma;-S in K-S cells. Its outstanding performance should lead to new avenues for the development of this promising chemistry.

}, issn = {2050-7488}, doi = {10.1039/d3ta01751f}, author = {Pai, Rahul and Cardoza, Neal Amadeus and Natu, Varun and Barsoum, Michel W. and Kalra, Vibha} } @article {48750, title = {Novel shear thickening fluids possessing high shear rates using monodispersed silica nanoparticles and PEG}, journal = {Polymer Bulletin}, volume = {80}, year = {2023}, month = {DEC}, pages = {13069-13098}, type = {Article}, abstract = {

Higher shear rate possessing homogeneous shear thickening fluids were synthesized using monodispersed silica nanoparticles and polyethylene glycol (PEG). Novel homogeneous methodology was developed for the synthesis of shear thickening fluids using monodispersed silica nanoparticles and PEG. Shear rate of shear thickening fluids (STF) was determined using rheometer at room temperature. The normal shear rate was observed in the range of 100 to 1200 s(-1), whereas higher shear rate 2000 s(-1) was obtained using monodispersed silica nanoparticles, PEG and shear rate enhancer. Monodispersed silica nanoparticles were synthesized in a typical one-pot using modified Stober{\textquoteright}s method at room temperature. Precursors were used for the synthesis of monodispersed silica nanoparticles such as tetraethyl orthosilicate (TEOS), ethanol, deionized water and ammonia as catalyst. Particle size of monodispersed silica nanoparticles was in the range of 100-1200 nm, and particle size distribution was varied from 0.000 to 0.221. Synthesis of monodispersed silica nanoparticles was studied by various parameters, namely effect of TEOS concentration, grade of ethyl alcohol, ammonia concentration and water concentration. TEOS concentration effect shows particle size and particle size distribution increases with increase in concentration of TEOS. Even though concentration of TEOS was increased up to 5 times the observation was same for all particle sizes such as 100, 300 and 500 nm. Particularly in the case of 300 nm monodispersed silica nanoparticle synthesis, as TEOS concentration was increased from 1 to 5X (5 times) the particle size was increased from 331.7, 447.8, 497.0, 512.0 and 531.7 nm and particle size distribution was 0.005, 0.000, 0.006, 0.007 and 0.089, respectively. The effect of grade of ethyl alcohol illustrates that Indian rectified spirit shows almost similar results with respect to China make ethyl alcohol. Comparative study of China and Indian rectified spirit shows silica nanoparticle size was 174.6 and 174.2 nm, and particle size distribution was 0.065 and 0.071, respectively. Ammonia concentration effect explains particle size and particle size distribution increases with increase in concentration of ammonia. Water concentration effect shows particle size and particle size distribution increases with increase in concentration of ammonia. Comparative data of water concentration effect for 1316 and 1974 mL shows particle size were 321.7 and 488.0 nm, and particle size distribution was 0.083 and 0.05, respectively, under similar conditions. Morphological studies displayed the shape of the silica nanoparticles was spherical, monodispersed and isolated. A typical TEM image of monodispersed silica nanoparticles for 500 nm was observed with extremely low polydispersity, i.e., 0.000. It is very difficult to get such a type of excellent photograph of monodispersity by Stober{\textquoteright}s method particularly on large scale. Rheology study of homogeneous shear thickening fluids studied by varying the parameters such as composition of silica nanoparticles with PEG, effect of amount of solvent, effect of refluxing time, effect of additive with respect to the mol. wt. of PEG and effect of additive such as Tannin. All these parameters of STF explored with respect to the shear rate and shear viscosity. Effect of ethanol amount on STF demonstrates the shear rate increases with increase in amount of solvent. Effect of refluxing time on STF exhibits the shear rate increases with increase in refluxing time. Effect of composition based on 500 nm monodispersed silica nanoparticles and PEG 200 with respect to 60:40, 65:35 and 70:30 composition was studied and the results predict that shear rate increases with increase in silica percentage in composition, i.e., 118, 265 and 1200 s(-1) for 60:40, 65:35 and 70:30 composition, respectively, whereas maximum viscosity decreases with increase in silica content, i.e., 2.559, 1.420 and 1.200 Pa.s for 60:40, 65:35 and 70:30 composition, respectively. Effect of additive on shear rate and shear viscosity illustrates that shear rate decreases with increase in additive percentage in composition, whereas maximum viscosity increases with increase in additive content. Effect of additives on shear rate and shear viscosity was performed using 65:35 composition with respect to PEG 200 along with PEG 6000 shows shear rate was decreased from 142 to 6.42 s(-1) and maximum viscosity was increased from 56.1 to 571.0 Pa.s when the quantity of PEG 6000 was doubled. In general, additive decreases shear rate and increases shear viscosity (maximum). But effect of Tannin as an additive on 500 nm monodispersed silica nanoparticles with PEG 200 using 70:30 composition showed enormous increase in shear rate, i.e., 2000 s(-1). This is anomalous behavior of additive was observed.

}, keywords = {Monodispersed silica nanoparticles, Nanocomposite, Polyethylene glycol, Shear rate, Shear thickening fluid}, issn = {0170-0839}, doi = {10.1007/s00289-023-04696-7}, author = {Chavan, Nayaku and Dhage, Atul and Wale, Apparav and Thorave, Asmita and Rajdeo, Kishor and Kamble, Sanjay and Ponrathnam, Surendra and Tambe, Sanjeev and Verma, Sanjeevkumar} } @article {48681, title = {Organocatalysed one-pot three component synthesis of 3,3'-disubstituted oxindoles featuring an all-carbon quaternary center and [spiro 2H-pyran-3,4'-indoline]}, journal = {RSC Advances}, volume = {13}, year = {2023}, month = {APR}, pages = {13206-13212}, type = {Article}, abstract = {

A simple and efficient methodology for the one-pot synthesis of 3,3 {\textquoteleft}-disubstituted oxindoles featuring an all-carbon quaternary center has been demonstrated through l-proline catalysed three-component reaction based on sequential Knoevenagel condensation/Michael addition and also one-pot synthesis of spiro[2H-pyran-3,4 {\textquoteleft}-indoline] through consecutive Knoevenagel condensation/Michael addition/reduction/cyclization reactions from readily available isatin derivatives, malononitrile, and ketones. The present methodology presents several advantages, including simple reaction set-up, short reaction times, and easy to work-up. Also, this strategy offers broad substrate scope with excellent yields and high atom economy, under mild reaction conditions.

}, doi = {10.1039/d3ra00510k}, author = {Nichinde, Chandrakant B. and Patil, Baliram R. and Chaudhari, Suryakant S. and Mali, Bhupendra P. and Gonnade, Rajesh G. and Kinage, Anil K.} } @article {48671, title = {Palladium-catalyzed polar solvent empowered synthesis of hyper-branched ethylene oligomers and their applications}, journal = {Polymer Chemistry}, volume = {14}, year = {2023}, month = {JUL}, pages = {3239-3251}, type = {Article}, abstract = {

In this contribution, we report the synthesis of two naphthoxy imine ligands, 2-(((2,6-dibenzhydryl-4-methoxyphenyl)imino)methyl)naphthalen-1-ol (L1) and 2-(((2,6-diisopropylphenyl)imino)methyl)naphthalen-1-ol (L2), with different steric and electronic features. L1 and L2 were treated with [(TMEDA)PdMe2] to obtain the corresponding neutral palladium(ii) complexes Cat.1 and Cat.2 in excellent yields. The identity of Cat.1 and Cat.2 was unambiguously ascertained using a combination of spectroscopic and analytical methods, including single-crystal X-ray diffraction. When exposed to 5 bar ethylene pressure, Cat.1 produced hyperbranched ethylene oligomers. The microstructure analysis of ethylene oligomers confirmed the existence of methyl, ethyl, propyl, and sec-butyl branches, with a molecular weight (M-n) of 500-1400 g mol(-1), a PDI of 1.46-2.10, and 67-106 branches per 1000 carbon atoms. The use of a polar solvent, tetrahydrofuran, led to a remarkable 3-fold increase in oligomerization activity without compromising the branching and molecular weight. The resultant hyperbranched ethylene oligomers were selectively monofunctionalized using industrially practiced hydroformylation, ozonolysis, and epoxidation, almost quantitatively. The hydroxy functionalized ethylene oligomer (F4) (5 wt\%) was melt-compounded with LLDPE and Nylon-6 to produce a tough yet flexible blend with a higher strain-to-failure as compared to an uncompatibilized blend.

}, issn = {1759-9954}, doi = {10.1039/d3py00311f}, author = {Birajdar, Rajkumar S. and Gonnade, Rajesh G. and Pol, Harshawardhan V. and Prabhu, M. Basava and Rokade, Dhammaraj and Nandimath, Sheetal and Chikkali, Samir H.} } @article {48476, title = {Parallel evolution of cannabinoid biosynthesis}, journal = {Nature Plants}, volume = {9}, year = {2023}, month = {MAY}, pages = {817+}, type = {Article}, abstract = {

This study reveals a cannabinoid biosynthetic pathway in Helichrysum umbraculigerum, a plant genetically distant from Cannabis, providing a potential source of new cannabinoids and metabolic engineering tools. Modulation of the endocannabinoid system is projected to have therapeutic potential in almost all human diseases. Accordingly, the high demand for novel cannabinoids stimulates the discovery of untapped sources and efficient manufacturing technologies. Here we explored Helichrysum umbraculigerum, an Asteraceae species unrelated to Cannabis sativa that produces Cannabis-type cannabinoids (for example, 4.3\% cannabigerolic acid). In contrast to Cannabis, cannabinoids in H. umbraculigerum accumulate in leaves{\textquoteright} glandular trichomes rather than in flowers. The integration of de novo whole-genome sequencing data with unambiguous chemical structure annotation, enzymatic assays and pathway reconstitution in Nicotiana benthamiana and in Saccharomyces cerevisiae has uncovered the molecular and chemical features of this plant. Apart from core biosynthetic enzymes, we reveal tailoring ones producing previously unknown cannabinoid metabolites. Orthology analyses demonstrate that cannabinoid synthesis evolved in parallel in H. umbraculigerum and Cannabis. Our discovery provides a currently unexploited source of cannabinoids and tools for engineering in heterologous hosts.

}, issn = {2055-026X}, doi = {10.1038/s41477-023-01402-3}, author = {Berman, Paula and de Haro, Luis Alejandro and Jozwiak, Adam and Panda, Sayantan and Pinkas, Zoe and Dong, Younghui and Cveticanin, Jelena and Barbole, Ranjit and Livne, Rotem and Scherf, Tali and Shimoni, Eyal and Levin-Zaidman, Smadar and Dezorella, Nili and Petrovich-Kopitman, Ekaterina and Meir, Sagit and Rogachev, Ilana and Sonawane, Prashant D. and Aharoni, Asaph} } @article {48712, title = {Permeable polymersomes from temperature and pH dual stimuli-responsive PVCL-b-PLL block copolymers for enhanced cell internalization and lysosome targeting}, journal = {Biomaterials Advances}, volume = {151}, year = {2023}, month = {AUG}, pages = {213454}, type = {Article}, abstract = {

A series of dual stimuli-responsive block copolymers comprising temperature-responsive poly(N-vinyl-caprolactam) (PVCL) and biodegradable pH-responsive poly(L-lysine) (PLL) of varying chain length were syn-thesized by a combination of free radical polymerization and ring opening polymerization. The block copolymers formed micelles and vesicles (polymersomes) in response to temperature and pH, respectively, in aqueous so-lution. The nanoassemblies were characterized by transmission electron microscopy and dynamic light scattering techniques. Encapsulation of both hydrophobic and hydrophilic dyes in the polymersomes was shown. Doxo-rubicin (DOX) was loaded in the polymersomes and its controlled release in response to the two stimuli, inde-pendently and jointly, was studied. The drug was found to be released due to stimuli-induced increased permeability without disassembly of the polymersomes. A significant increase in the cellular uptake of the drug-loaded polymersomes at hyperthermia conditions was demonstrated at 41 degrees C and release of the drug upon localization in lysosomes was observed. Cellular internalization pathway of the polymersomes was investigated by competitive inhibition assay and a combination of endocytic pathways dominated by caveolae-mediated mechanism was found to be operative.

}, keywords = {block copolymers, Controlled release, drug delivery, endocytosis, Polymersomes, Stimuli-responsive}, doi = {10.1016/j.bioadv.2023.213454}, author = {Surapaneni, Sai Geetika and Choudhari, Shakeb N. and Avhad, Shankarrao V. and Ambade, Ashootosh V.} } @article {48759, title = {Polyethylene-grafted sheet-like silsesquioxane nanocomposites with unprecedented adhesion to polar substrates}, journal = {ACS Applied Polymer Materials}, volume = {5}, year = {2023}, month = {JUL}, pages = {5972-5983}, type = {Article}, abstract = {

Polyethylene is a highly apolar polymer with very pooradhesionto most substrates, necessitating the use of tie layers. Therefore,the synthesis of functional polyethylene is a long-standing challengein catalytic ethylene polymerization. Here, we report the preparationof a nanocomposite comprising polyethylene covalently grafted ontosheet-like silsesquioxanes, with unprecedented adhesion to metal andglass. A norbornene-grafted, layered Mg-silsesquioxane is treatedwith Grubbs second-generation catalyst (G-II), and the identity ofcovalently tethered G-II is unambiguously ascertained. Covalentlytethered G-II catalyzes the ring opening metathesis polymerizationof cyclooctene to poly(cyclooctene). The resulting poly(cyclooctene)is catalytically hydrogenated to yield polyethylene. This polyethylenenanocomposite exhibited a bonding strength of the order of 100 MPaon stainless steel and aluminum, 10-fold higher than reported forengineered polyethylene copolymers. The nanocomposite exhibits anincrease in the polar component of surface energy, yet remains compatibleand cocrystallizes with a polyethylene matrix.

}, keywords = {adhesion, clay, Nanocomposite, Polyethylene, silsesquioxane}, issn = {2637-6105}, doi = {10.1021/acsapm.3c00649}, author = {Sharma, Vivek and Paulbudhe, Uday and Bachhar, Nirmalya and Chikkali, Samir H. and Kumaraswamy, Guruswamy} } @article {48718, title = {Rapid bioinspired N-acyliminium ion strategy for the ABC core of the stemona alkaloids}, journal = {Asian Journal of Organic Chemistry}, volume = {12}, year = {2023}, month = {SEP}, type = {Article}, abstract = {

A concise and highly diastereoselective bioinspired key cationic cyclization strategy for the asymmetric synthesis of the tricyclic core of the (-)-stemoamide, together with 8,9-bis-epi-stemoamide has been described. The key N-acyliminium ion precursors were accessed from L-tartaric acid and L-malic acid respectively. The use of ethyl acetoacetate derived bifunctional allylidenetriphenylphosphorane reagent in the early stage of the synthetic strategy is advantageous for the rapid construction of highly functionalized key pyrrolo[1,2-\& alpha;]azepine frameworks.

}, keywords = {alkaloids, Biomimetic synthesis, Claisen rearrangement, cyclization, Regioselectivity}, issn = {2193-5807}, doi = {10.1002/ajoc.202300331}, author = {Chavan, Subhash P. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {48287, title = {Robust optimization and characterization of MCM-41 nanoparticle synthesis using modified sol-gel method}, journal = {ChemistrySelect}, volume = {8}, year = {2023}, month = {MAR}, pages = {e202204968}, type = {Article}, abstract = {

Mesoporous silica nanoparticles (MSN) for drug delivery application requires great expertise to synthesize small sized monodisperse particles. We aimed at synthesizing and optimizing MCM-41 particles with the modified Stober{\textquoteright}s method by adjusting factors such as concentrations of cetyltrimethylammonium bromide (CTAB), sodium hydroxide (NaOH) and water (H2O) with respect to tetraethyl orthosilicate (TEOS), and a process parameter (stirring). We comprehended that the reactants determined the shape and size of both the particles and pores. Upon extensive characterization we report the synthesis of spherical particles of similar to 70 nm size in a monodisperse population; the structures had hexagonal ordered pores of diameter 3.071 nm and volume 3.124 cm(3)/g; the total surface area of 3410.648 m(2)/g of the particles was covered with silanol groups that aid in functionalization; the particles exhibited great thermal stability. Thus, the extensive optimization fabricated robust MCM-41 particles fit for drug delivery application.

}, keywords = {characterization technique, dynamic light scattering (DLS), mesoporous materials, Nanoparticles, sol gel processes}, issn = {2365-6549}, doi = {10.1002/slct.202204968}, author = {Shende, Rajnigandha A. and Chaudhari, Bhushan P.} } @article {48831, title = {Solvation structure and dynamics of a small ion in an organic electrolyte}, journal = {Journal of Photochemistry and Photobiology A-Chemistry}, volume = {440}, year = {2023}, month = {JUN}, pages = {114666}, type = {Article}, abstract = {

Organic carbonates are commonly used as electrolytes in commercial lithium-ion batteries. A detailed interpretation of the solvation structure and dynamics of the electrolyte around ions is necessary to understand the charge/discharge process in batteries. This work combines infrared absorption spectroscopy with quantum chemical calculations and molecular dynamics simulations to decipher the solvation structure of propylene carbonate, a cyclic carbonate, around the dissolved thiocyanate ion. Two dimensional infrared spectroscopy and polarization-selective pump probe spectroscopies have been utilized to extract the timescales of solvent fluctuation and the solute reorientational dynamics. The similarity in the slow timescales for the solute and the solvent dynamics signifies that similar processes control both dynamics.

}, issn = {1010-6030}, doi = {10.1016/j.jphotochem.2023.114666}, author = {Kore, Shivshankar and Sahoo, Rudhi Ranjan and Santra, Binit and Sarkar, Archishman and Chowdhury, Tubai and Deshmukh, Samadhan H. and Hazarika, Sulagna and Chatterjee, Srijan and Bagchi, Sayan} } @article {48826, title = {Synthesis, biological evaluation and docking studies of silicon incorporated diarylpyrroles as MmpL3 inhibitors: an effective strategy towards development of potent anti-tubercular agents}, journal = {European Journal of Medicinal Chemistry}, volume = {259}, year = {2023}, month = {NOV }, pages = {115633}, type = {Article}, abstract = {

Growing global demand for new molecules to treat tuberculosis has created an urgent need to develop novel strategies to combat the menace. BM212 related compounds were found to be potent anti-TB agents and they inhibit mycolic acid transporter, MmpL3, a known potent drug target from Mycobacterium tuberculosis. In order to enhance their inhibitory potency, several silicon analogues of diarylpyrroles related to BM212 were designed, synthesized, and evaluated for anti-tubercular activities. In Alamar blue assay, most of the silicon-incorporated compounds were found to be more potent than the parent compound (BM212), against Mycobacterium tuberculosis (MIC = 1.7 \& mu;M, H37Rv). Docking results from the crystal structure of MmpL3 and silicon analogues as pharmacophore model also strongly correlate with the biological assays and suggest that the incorporation of silicon in the inhibitor scaffold could enhance their potency by stabilizing the hydrophobic residues at the binding pocket. The best docking hit, compound 12 showed an MIC of 0.1 \& mu;M against H37Rv with an acceptable in vitro ADME profile and excellent selectivity index. Overall, the present study indicates that, the designed silicon analogues, especially compound 12 could be a good inhibitor for an intrinsically flexible drug-binding pocket of MmpL3 and has potential for further development as anti-tubercular agents.

}, keywords = {antibiotic, BM212, docking studies, MmpL3 inhibitor, Silicon analogue, tuberculosis}, issn = {0223-5234}, doi = {10.1016/j.ejmech.2023.115633}, author = {Vasudevan, N. and Motiwala, Zenia and Ramesh, Remya and Wagh, Sachin B. and Shingare, Rahul D. and Katte, Revansiddha and Anand, Amitesh and Choudhary, Sushil and Kumar, Ajay and Gokhale, Rajesh S. and Kulkarni, Kiran A. and Reddy, D. Srinivasa} } @article {48786, title = {Tau aggregates improve the Purinergic receptor P2Y12-associated podosome rearrangements in microglial cells}, journal = {Biochimica Et Biophysica Acta-Molecular Cell Research}, volume = {1870}, year = {2023}, month = {JUN}, pages = {119477}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease (AD) is a progressive neurodegenerative disease that is associated with protein misfolding, plaque accumulation, neuronal dysfunction, synaptic loss, and cognitive decline. The pathological cascade of AD includes the intracellular Tau hyperphosphorylation and its subsequent aggregation, extracellular Amyloid-\& beta; plaque formation and microglia-mediated neuroinflammation. The extracellular release of aggregated Tau is sensed by surveilling microglia through the involvement of various cell surface receptors. Among all, purinergic P2Y12R signaling is involved in microglial chemotaxis towards the damaged neurons. Microglial migration is highly linked with membrane-associated actin remodeling leading to the phagocytosis of extracellular Tau species. Here, we studied the formation of various actin structures such as podosome, lamellipodia and filopodia, in response to extracellular Tau monomers and aggregates. Microglial podosomes are colocalized with actin nucleator protein WASP, Arp2 and TKS5 adaptor protein during Tau-mediated migration. Moreover, the P2Y12 receptors were associated with F-actin-rich podosome structures, which signify the potential of Tau aggregates in microglial chemotaxis through the involvement of actin remodeling.

}, keywords = {Alzheimer {\textquoteleft}s disease, Filopodia, microglia, Podosome, Tau aggregates}, issn = {0167-4889}, doi = {10.1016/j.bbamcr.2023.119477}, author = {Chinnathambi, Subashchandrabose and Das, Rashmi and Desale, Smita Eknath} } @article {48454, title = {Template directed synthesis of boron carbon nitride nanotubes (BCN-NTs) and their evaluation for energy storage properties}, journal = {Advanced Materials Interfaces}, volume = {10}, year = {2023}, month = {JAN}, type = {Article}, abstract = {

A unique approach has been applied for the synthesis of 1D boron carbon nitride nanotubes (BCN-NTs) using MnO2 nanowires as templates. BCN-NTs have been evaluated in Na-ion batteries, Li-ion batteries, and supercapacitors as electrode material and exhibited excellent and stable electrochemical performance. BCN-NTs as an anode for Na-ion battery has been shown to be highly stable up to 3000 cycles with capacity retention of 95 mAh g(-1), at a high current density of 1 A g(-1). In the case of the Li-ion battery, these BCN-NTs show a specific capacity of 563 mAh g(-1) at a current density of 50 mA g(-1). Finally, when used as an electrode for a supercapacitor, BCN-NTs display a specific capacity of 221 F g(-1) at a current density of 3 A g(-1) and 168 F g(-1) even at a very high current density of 30 A g(-1) exemplifying the excellent rate performance. The multifunctionality and stable performance of BCN-NTs among various electrochemical energy storage systems highlight the robustness of the material and make it an excellent candidate for scalable production and commercialization.

}, keywords = {1D-nanostructure, boron carbon nitride nanotubes (BCN-NTs), Co-doping, Li-ion battery, Na-ion battery, Supercapacitors}, issn = {2196-7350}, doi = {10.1002/admi.202201560}, author = {Karbhal, Indrapal and Chaturvedi, Vikash and Yadav, Poonam and Patrike, Apurva and Shelke, Manjusha V.} } @article {48307, title = {TGF-beta 1 signalling in Alzheimer{\textquoteright}s pathology and cytoskeletal reorganization: a specialized Tau perspective}, journal = {Journal of Neuroinflammation}, volume = {20}, year = {2023}, month = {MAR}, pages = {72}, type = {Review}, abstract = {

Microtubule-associated protein, Tau has been implicated in Alzheimer{\textquoteright}s disease for its detachment from microtubules and formation of insoluble intracellular aggregates within the neurons. Recent findings have suggested the expulsion of Tau seeds in the extracellular domain and their prion-like propagation between neurons. Transforming Growth Factor-beta 1 (TGF-beta 1) is a ubiquitously occurring cytokine reported to carry out immunomodulation and neuroprotection in the brain. TGF-beta-mediated regulation occurs at the level of neuronal survival and differentiation, glial activation (astrocyte and microglia), amyloid production-distribution-clearance and neurofibrillary tangle formation, all of which contributes to Alzheimer{\textquoteright}s pathophysiology. Its role in the reorganization of cytoskeletal architecture and remodelling of extracellular matrix to facilitate cellular migration has been well-documented. Microglia are the resident immune sentinels of the brain responsible for surveying the local microenvironment, migrating towards the beacon of pertinent damage and phagocytosing the cellular debris or patho-protein deposits at the site of insult. Channelizing microglia to target extracellular Tau could be a good strategy to combat the prion-like transmission and seeding problem in Alzheimer{\textquoteright}s disease. The current review focuses on reaffirming the role of TGF-beta 1 signalling in Alzheimer{\textquoteright}s pathology and cytoskeletal reorganization and considers utilizing the approach of TGF-beta-triggered microglia-mediated targeting of extracellular patho-protein, Tau, as a possible potential strategy to combat Alzheimer{\textquoteright}s disease.

}, keywords = {Alzheimer{\textquoteright}s disease, Cytoskeleton reorganization, Extracellular Tau, microglia, TGF-beta, TGF-beta 1}, doi = {10.1186/s12974-023-02751-8}, author = {Kapoor, Mahima and Chinnathambi, Subashchandrabose} } @article {48332, title = {Thermally constructed stable Zn-doped NiCoOx-z alloy structures on stainless steel mesh for efficient hydrogen production via overall hydrazine splitting in alkaline electrolyte}, journal = {Journal of Colloid and Interface Science}, volume = {640}, year = {2023}, month = {JUN }, pages = {737-749}, type = {Article}, abstract = {

Hydrogen has a high energy density of approximately 120 to 140 MJ kg(-1), which is very high compared to other natural energy sources. However, hydrogen generation through electrocatalytic water splitting is a high electricity consumption process due to the sluggish oxygen evolution reaction (OER). As a result, hydrogen generation through hydrazine-assisted water electrolysis has recently been intensively investigated. The hydrazine electrolysis process requires a low potential compared to the water electrolysis process. Despite this, the utilization of direct hydrazine fuel cells (DHFCs) as portable or vehicle power sources necessitates the development of inexpensive , effective anodic hydrazine oxidation catalysts. Here, we prepared oxygen-deficient zinc-doped nickel cobalt oxide (Zn-NiCoOx-z) alloy nanoarrays on stainless steel mesh (SSM) using a hydrothermal synthesis method followed by thermal treatment. Furthermore, the prepared thin films were used as electrocatalysts , the OER and hydrazine oxidation reaction (HzOR) activities were investigated in three-and two-electrode systems. In a three-electrode system, Zn-NiCoOx-z/SSM HzOR requires-0.116 V (vs RHE) potential to achieve a 50 mA cm(-2) current density, which is dramatically lower than the OER potential (1.493 V vs RHE). In a two-electrode system (Zn-NiCoOx-z/SSM(-)IIZn-NiCoOx-z/SSM(+)), the overall hydrazine splitting potential (OHzS) required to reach 50 mA cm(-2) is only 0.700 V, which is dramatically less than the required potential for overall water splitting (OWS). These excellent HzOR results are due to the binder-free oxygen-deficient Zn-NiCoOx-z/ SSM alloy nanoarray, which provides a large number of active sites and improves the wettability of cat-alysts after Zn doping. (C) 2023 Elsevier Inc. All rights reserved.

}, keywords = {Hydrazine Oxidation Reaction, hydrogen evolution reaction, Oxygen Evolution Reaction, Oxygen-Deficient Materials, Zinc Doping}, issn = {0021-9797}, doi = {10.1016/j.jcis.2023.02.142}, author = {Kashale, Anil Ashok and Rasal, Akash Sanjay and Hsu, Fei-Chien and Chen, ChangChun and Kulkarni, Sayali Nitin and Chang, Chun Hao and Chang, Jia-Yaw and Lai, Yuekun and Chen, I. -Wen Peter} } @article {48262, title = {Ti-iminocarboxylate catalyzed polymerization of ethylene to highly crystalline, disentangled, ultrahigh molecular weight polyethylene}, journal = {European Polymer Journal}, volume = {182}, year = {2023}, month = {JAN }, pages = {111725}, type = {Article}, abstract = {

Disentangled ultrahigh molecular weight polyethylene (d-UHMWPE) is a niche, highly sought-after, and an emerging class of polyethylene. However, the synthesis of d-UHMWPE is uncommon and is equally challenging. Here, we report a Ti-iminocarboxylate complex that produces d-UHMWPE under ambient polymerization conditions. Treatment of tetrakis(dimethylamido-titanium) [Ti(NMe2)4] with 2-((4-methoxybenylidene)amino)benzoic acid produced a novel titanium complex Cat.1 [bis-dimethylamido-Ti-(bis-iminocarboxylate)]. The identity of Cat.1 was unambiguously ascertained using a combination of 1-2D NMR spectroscopy and mass analysis. Cat.1 was activated using various cocatalysts, and MMAO (modified methylaluminoxane) outperformed the others. Screening of polymerization parameters suggested an Al/Ti ratio of 1000, 4 bar ethylene pressure, 35 degrees C temperature, and a polymerization time of 30 min as the optimal condition. Under the optimized polymerization conditions, Cat.1 polymerizes ethylene to ultrahigh molecular weight polyethylene with a weight average molecular weight (Mw) of 2.5 x 106 g/mol. The thermal behavior of the thus prepared material disclosed a highly crystalline [crystallinity chi (DSC) 96 \%], strictly linear polyethylene. Detailed thermal analysis of the nascent polyethylene using a specifically designed DSC method revealed the existence of a high melting peak at 139-140 degrees C, which is a hallmark of disen-tangled UHMWPE. Thus, a homogeneous, single-site ethylene polymerization catalyst has been developed, which upon activation with MMAO produced highly crystalline d-UHMWPE.

}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2022.111725}, author = {Bodkhe, Dnyaneshwar V. and Chikkali, Samir H.} } @article {48342, title = {Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices}, journal = {ACS Applied Nano Materials}, volume = {6}, year = {2023}, month = {JAN}, pages = {44-49}, type = {Article}, abstract = {

The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.

}, keywords = {Current stability, field emission, nanoribbon, nanosheets, TiS3}, doi = {10.1021/acsanm.2c03460}, author = {Pawbake, Amit S. and Khare, Ruchita T. and Island, Joshua O. and Flores, Eduardo and Ares, Jose R. and Sanchez, Carlos and Ferrer, Isabel J. and Pawar, Mahendra and Frank, Otakar and More, Mahendra A. and van der Zant, Herre S. J. and Castellanos-Gomez, Andres and Late, Dattatray J.} } @article {48788, title = {Total and diverted total synthesis of pyrrolo-quinazolinone alkaloids and their analogues}, journal = {ChemistrySelect}, volume = {8}, year = {2023}, month = {SEP }, pages = {e202301818}, type = {Article}, abstract = {

A short and expeditious total and diverted total synthesis of luotonin, vasicinone, and their analogues has been achieved from the key tricyclic quinazolinone intermediate which was accessed from simple substituted anthranilamide obtained from the coupling of \& beta;-alanate with isatoic anhydride followed by Dieckmann condensation chemistry of the resulting diester. The tricyclic ketone exhibited interesting chemical properties, e. g. keto-enol tautomerism. Friedlander condensation and Fischer-Indolization were employed for further annulations to access polycyclic alkaloids and their analogues. A short and expeditious total and diverted total synthesis of Luotonin, Vasicinone, and their analogues has been achieved from the key tricyclic quinazolinone ketone that was accessed via Dieckmann condensation chemistry of the diester which was in turn obtained from the isatoic anhydride followed by cyclodehydration. The keto-enol tautomerism of the tricyclic ketone has been studied through 1H NMR. Friedlander condensation and Fischer-Indolization were employed for further annulations on to the tricyclic ketone to yield luotonins and nor-rutaecarpines in good yields.image

}, keywords = {Luotonin, Quinazolinone, Rutaecarpine, Total synthesis, Vasicinone}, issn = {2365-6549}, doi = {10.1002/slct.202301818}, author = {Rasapalli, Sivappa and Huang, Yanchang and Sammeta, Vamshikrishna Reddy and Alshehry, Reem and Anver, Fazmina and Shivasankar, Krishnamoorthy and Chavan, Subash P.} } @article {48801, title = {Total synthesis and absolute configuration determination of the α-glycosidase inhibitor (3S,4R)-6-Acetyl-3-hydroxy-2,2-dimethylchroman-4-yl (Z)-2-Methylbut-2-enoate from Ageratina grandifolia}, journal = {Journal of Natural Products}, volume = {86}, year = {2023}, month = {JUN}, pages = {1878-1883}, type = {Article}, abstract = {

Herein, we report the first total synthesis of \& alpha;-glycosidaseinhibitor (3R, 4S)-6-acetyl-3-hydroxy-2,2-dimethylchroman-4-yl(Z)-2-methylbut-2-enoate as well as its enantiomer.Our synthesis confirms the chromane structure separately proposedby Navarro-Vazquez and Mata, on the basis of DFT computations. Furthermore,our synthesis allowed us to determine the absolute configuration ofthe natural compound as (3S, 4R)and not (3R, 4S).

}, issn = {0163-3864}, doi = {10.1021/acs.jnatprod.3c00236}, author = {Dandawate, Monica and Choudhury, Rahul and Krishna, Gamidi Rama and Reddy, D. Srinivasa} } @article {48306, title = {Trehalose transporter-like gene diversity and dynamics enhances stress response and recovery in Helicoverpa armigera}, journal = {Gene}, volume = {862}, year = {2023}, month = {APR}, pages = {147259}, type = {Article}, abstract = {

Trehalose is a primary sugar and its distribution across the insect body, regulated by trehalose transporters (TRETs), is essential for sugar metabolism and energy homeostasis. The large diversity of Tret-like sugar trans-porters (ST), belonging to SLC2A transporter family, in polyphagous insects probably contributes to their extremely adaptive nature. We aim to study spatio-temporal expression dynamics and functional relevance of ST transcript variants in the lepidopteran model organism, Helicoverpa armigera. Identification of 69 putative Tret-like HaST transcript variants from databases and their digital gene expression analysis indicated tissue and development-specific expression patterns. Phylogenetic and sequence similarity network analysis of HaSTs signify evolutionary divergence, while motif and structure analysis depicted conserved signatures. In vitro gene expression validation for selected genes depicts that HaST09 and 69 are fat body and haemolymph-specific. While, HaST06, 30, 36 and 57 are developmental stage or sex-specific. HaST69 has high expression in the haemolymph of fifth instar larvae. In the presence of trehalose metabolism inhibitors and abiotic stress, HaSTs expression show dysregulation, indicating their possible association with trehalose metabolism and stress re-covery. In vivo gene silencing of HaST69 resulted in reduced trehalose accumulation in the insect body, sug-gesting its plausible role in sugar metabolism. The overall understanding of HaST diversity and expression dynamics highlights their putative roles in sugar transport during adaptation and stress recovery of insects.

}, keywords = {Gene expression, Helicoverpa armigera, Stress, Transporter-like, trehalose}, issn = {0378-1119}, doi = {10.1016/j.gene.2023.147259}, author = {Tellis, Meenakshi B. and Chaudhari, Bhagyashri Y. and Deshpande, Shweta V. and Nikam, Sanika V. and Barvkar, Vitthal T. and Kotkar, Hemlata M. and Joshi, Rakesh S.} } @article {48455, title = {Ultrafast spectroscopy of plasmons and free carriers in 2D MXenes}, journal = {Advanced Materials}, volume = {35}, year = {2023}, month = {FEB}, type = {Article}, abstract = {

2D MXenes have diverse and chemically tunable optical properties that arise from an interplay between free carriers, interband transitions, and plasmon resonances. The nature of photoexcitations and their dynamics in three different members of the MXene family, Ti3C2, Mo2Ti2C3, and Nb2C, are investigated using two complementary pump-probe techniques, transient optical absorption, and time-resolved terahertz (THz) spectroscopy. Measurements reveal pronounced plasmonic effects in the visible and near-IR in all three. Optical excitation, with either 400 or 800 nm pulses, results in a rapid increase in lattice temperature, evidenced by a pronounced broadening of the plasmon mode that presents as a plasmon bleach in transient absorption measurements. Observed kinetics of plasmon bleach recovery provide a means to monitor lattice cooling. Remarkably slow cooling, proceeding over hundreds of picoseconds to nanoseconds time scales, implies MXenes have low thermal conductivities. The slowest recovery kinetics are observed in the MXene with the highest free carrier density, viz. Ti3C2, that supports phonon scattering by free carriers as a possible mechanism limiting thermal conductivity. These new insights into photoexcitation dynamics can facilitate their applications in photothermal solar energy conversion, plasmonic devices, and even photothermal therapy and drug delivery.

}, keywords = {2D properties, MXenes, Optical properties, plasmons, ultrafast spectroscopy}, issn = {0935-9648}, doi = {10.1002/adma.202208659}, author = {Colin-Ulloa, Erika and Fitzgerald, Andrew and Montazeri, Kiana and Mann, Javery and Natu, Varun and Ngo, Ken and Uzarski, Joshua and Barsoum, Michel W. and Titova, Lyubov V.} }